Cooper Electric Supply Co. Locations

Transcription

Cooper Electric Supply Co. Locations
2012–13
table of contents
EYE PROTECTION
Safety Glasses......................................................................... 1,2
Wipes.....................................................................................................2
Eyewear Lanyards...................................................................2
FACE & HEAD PROTECTION
Speciality Hard Hats......................................................... 3,5
Standard Hard Hats..............................................................5
Hard Hat Accessories..................................................... 5,6
FIRE PROTECTION
Fire
Fire
Fire
Fire
Fire
Barrier
Barrier
Barrier
Barrier
Barrier
Cast-in Devise Products..................16
Pass-Through Products......................16
Sealants.............................................................16
Caulk Guns....................................................17
Miscellaneous Products...................17
FIRST AID & SAFETY VESTS
First Aid Kits...................................................................................18
Safety Vests.................................................................................18
HEARING & RESPIRATORY PROTECTION
Ear Plugs.............................................................................................7
Earmuffs..............................................................................................7
Respirators........................................................................................7
HAND PROTECTION
General Purpose Coated Knit Gloves..............8
Cut Resistant Gloves....................................................... 8,9
Leather-Palmed Work Gloves....................................9
Cotton and Jersey Gloves.............................................9
High Performance Gloves...................................... 9,10
Leather Gloves...........................................................................9
Powder Free Gloves..........................................................10
High Voltage Glove Kits................................................11
High Voltage Gloves........................................................12
Protector Gloves....................................................................13
Protective Bags.......................................................................13
FALL PROTECTION
PROTECTIVE CLOTHING & BARRICADE TAPE
Rainsuits...........................................................................................19
Barricade Tape.......................................................................19
FLASHLIGHTS, BATTERIES & LADDERS
Flashlights.......................................................................................20
Batteries...........................................................................................21
Step Ladders..............................................................................21
Extension Ladders.................................................................21
LOCKOUT/TAGOUT
Lockout/Tagout Kits............................................................22
Lockout Devices............................................................22,23
Tags, Locks & Labels..........................................................24
INSULATED TOOLS
Harnesses.......................................................................................14
Lanyards..........................................................................................14
Fall Limiters....................................................................................15
Carabiners....................................................................................15
Anchor Connectors............................................................15
Safety Steps.................................................................................15
Fall Protection Kit...................................................................15
Insulated Tools Kits...............................................................25
Insulated Tool....................................................................26,27
Arc Flash
Arc Flash Faceshields & Sock Hoods..............28
Coveralls.........................................................................................28
Arc Flash Kits...............................................................................29
1-3922c-203
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
eye protection
3M™ Moon Dawg™
Protective Eyewear
•
•
•
•
Ideal for outdoor safety sunwear
Stylish, lightweight, comfortable frame
Wide temples provide enhanced side coverage
Black frame
3M™ Privo Safety Eyewear
MFG.#
DESCRIPTION
11215-00000-20
Moon Dawg™ Sunwear, Gray
Anti-fog lens
EA
Moon Dawg™ sunwear, I/O
MIRROR Lens
EA
11216-00000-20
UOM
• European styling
• Soft temple tips
• Soft, comfortable nose bridge
MFG.#
DESCRIPTION
12265-00000-20
Privo™ eyewear, clear
anti-fog lens
EA
12268-00000-20
Privo™ eyewearm i/o mirror lens
EA
3M™ Virtua™ Safety Eyewear
•
•
•
•
•
•
UOM
3M™ Smart lens™
Protective Eyewear
Economical, comfortable protection
Sleek unisex styling
High wrap offers additional coverage
Clear templ
Clear len
Uncoated
• Lightens and darkens with
changing light conditions
• Nylon brow and magnesium
alloy temples
MFG.#
DESCRIPTION
11327-00000-20
GRAY TEMPLE/GRAY HC LENS
EA
11228-00000-100
CLEAR TEMPLE/CLEAR UNCOATED LENS
EA
• Spring-hinged temples
• Soft, adjustable nose bridge
• Photochromatic lens
UOM
3M™ BX™ Safety Eyewear
• Polycarbonate lens with three
angles for custom fit
• Adjustable soft-tip temples provide
MFG.#
DESCRIPTION
13407-00000-5
CLEAR TEMPLE/CLEAR UNCOATED LENS
UOM
EA
3M™ Light Vision™ 2 Protective
Eyewear
comfort for extended wear
• Gray/black frame
• Clear anti-fog lens
• Dual LED lights provide
MFG.#
DESCRIPTION
UOM
11380-00000-20
Silver Black Frame/Clear AF Lens
EA
11381-00000-20
Silver Black Frame/Gray AF Lens
EA
3M™ BX™ protecttive
Eyewear Readers
• Designed for workers who have
difficulty reading small print or
who are engaged in small detail work
• Polycarbonate lens with three lens angles
MFG.#
DESCRIPTION
11374-00000-20
BX™ Reader +1.5 Clear Lens
EA
11375-00000-20
BX™ Reader +2.0 Clear Lens
EA
11376-00000-20
BX™ Reader +2.5 Clear Lens
EA
hands-free lighting
• Lights swivel and adjust
• Clear anti-fog lens
MFG.#
DESCRIPTION
11476-00000-10
Light Vision 2 Led Eyewear
UOM
EA
11477-00000-10
Light Vision 2 Led ReadeR,
+1.5 Diopter, CLEAR Anti-Fog Lens
EA
11478-00000-10
Light Vision 2 Led ReadeR,
+2.0 Diopter, CLEAR Anti-Fog Lens
EA
11479-00000-10
Light Vision 2 Led ReadeR,
+2.5 Diopter, CLEAR Anti-Fog Lens
EA
UOM
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
1
EYE PROTECTION
Bolle’ Cobra Safety Glasses, HD lens, hydrophobic
•
•
•
•
•
•
High impact, Black/Gray
Polycarbonate lens with TPR Frame
Anti-fog/anti-scratch coated, clear HD Lens
High contour (9 base)
Single lens with 180 degree distortion-free viewing and superior optical quality
99.99% UVA and UVB light absorption
MFG.#
DESCRIPTION
253-CB-40040
Bolle’ Cobra Safety Glasses, HD lens, hydrophobic
UOM
EA
Bolle’ Contour Ultra Lite Safety Glasses
• Ultra light weight half frame provides extensive eye coverage
• 99.99% UVA and UVB light absorption
• Bollé Contour Eyewear, Dark Gunmetal Nylon Frame
MFG.#
253-CT-40045
253-CT-40047
DESCRIPTION
Smoke lens, anti-scratch/anti-fog
ESP Lens, anti-scratch
UOM
EA
EA
Bolle’ Lowrider Safety Glasses
• Polarized Gray Lens, Shiny Black Polycarbonate Frame anti-fog/anti-scratch coated
• 99.99% UVA and UVB light absorption
• Rubber temple tip
MFG.#
253-LW-40052
253-LW-40053
DESCRIPTION
smoke lens, anti-scratch/anti-fog
Polarized Safety Glasses, anti-scratch
UOM
EA
EA
Towelette Dispenser
• 100 individually packed, pre moistened lenses cleaning
towelettes per station
MFG.#
DESCRIPTION
UOM
252-LCT100
Towelette Dispenser
BX
3M™ Orange County Choppers™
Protective Eyewear 1200
3M™ Protective
Eyewear Breakaway
Lanyard
• Blue Mirror Lens
• Gun Metal Gray Frame
• Can be used with a
MFG.#
DESCRIPTION
11781-00000-10
Orange County Choppers™
Protective Eyewear 1200, Blue
Mirror Lens, Gun Metal Gray Frame
variety of different
eyewear styles
• Durable nylon
construction
UOM
EA
MFG.#
DESCRIPTION
11248-00000
Protective Eyewear Breakaway
Lanyard
UOM
ea
3M™ MAXIM Plus™ DUST Safety GOGGLE
•
•
•
•
2
Dust goggle with foam seal
Clear DX Lens
Strap included
Meets the High Impact requirements of ANSI Z87.1-2003
MFG.#
DESCRIPTION
12305-00000-20
MAXIM PLUS™ DUST GOGGLE W/STRAP CLR DX LEN
UOM
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
FACE & HEAD PROTECTION
Skullgard® Protective Caps and Hats
• Skullgard® Caps and Hats meet all applicable requirements for a
Type I (top impact) helmet
• Skullgard® Caps and Hats come with FAS-TRAC Suspension
(Ratchet)
MFG.#
475395
475407
DESCRIPTION
Natural Tan Skullgard® cap
Natural Tan Skullgard® Hat
UOM
EA
EA
NFL V-Gard® Assemblies V-Gard® Cap (Standard Size)
• The entire line of NFL V-Gard® Caps come equipped with the FAS-TRAC Suspension (Ratchet)
• MSA V-Gard® Caps meet all applicable requirements for a Type I (top impact) helmet
MFG.#
10098024
10098025
10098026
10098027
10098028
10098029
10098030
10098071
10098072
10098073
10098074
10098075
10098076
10098077
10098078
10098079
10098080
10098081
DESCRIPTION
UOM
Arizona Cardinals V-Gard® Protective Caps
EA
Atlanta Falcons V-Gard® Protective Caps
EA
Baltimore Ravens Protective Caps
EA
Buffalo Bills Protective Caps
EA
Carolina Panthers Protective Caps
EA
Chicago Bears V-Gard® Protective CapS
EA
Cincinnati Bengals V-Gard® Protective Caps
EA
Cleveland Browns V-Gard® Protective Caps
EA
Dallas Cowboys V-Gard® Protective Caps
EA
Denver Broncos Protective Caps
EA
Detroit Lions Protective Caps
EA
Green Bay Packers Protective Caps
EA
Houston Texans Protective Caps
EA
Indianapolis Colts V-Gard® Protective Caps
EA
Jacksonville Jaguars V-Gard® Protective
EA
Caps
Kansas City Chiefs Protective Caps
EA
Miami Dolphins Protective Caps
EA
EA
MINNESOTA VIKINGS V-Gard® Protective Caps
MFG.#
10098082
10098083
10098084
10098085
10098086
10098087
10098088
10098089
10098090
10098091
10098092
10098093
10098094
10098095
DESCRIPTION
New England Patriots V-Gard® Protective
Caps
New Orleans Saints V-Gard® Protective
CapS
New York Giants Protective Caps
New York Jets V-Gard® Protective CapS
Oakland Raiders Protective Caps
PHILADELPHIA EAGLES V-Gard® Protective
Caps
Pittsburgh Steelers V-Gard® Protective
Caps
San Diego Chargers V-Gard® Protective
Caps
San Francisco 49ers Protective Caps
Seattle Seahawks Protective Caps
St. Louis Rams Protective Caps
Tampa Bay Buccaneers Protective Caps
Tennessee Titans V-Gard® Protective Caps
Washington Redskins V-Gard® Protective
Caps
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
UOM
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
3
beSAFEbePROUD
with your company logo on your MSA hardhat.
Order Requirements
Minimum order quantity is 20 hardhats1.
❱ Style mix: Orders using the same custom logo may mix cap & hat style
hardhats.
❱ Model mix: Orders for two different hardhat models are allowed, though
models are limited to V-Gard® and Advance® Helmets.
Logos are extremely scratch-resistance and durable, water-proof and UV-resistant.
beSAFEbePROUD
by wearing your company logo on
MSA head protection products!
Customize your safety hardhats and head protection
products with your company logo and show pride in
your workplace!
Comfortable, stylish, and affordable safety helmets
imprinted with your custom company logo.
For your custom logoed hardhats, visit msasafety.com
or your authorized MSA distributor.
Logo Artwork and How to Supply It:
❱ Save files in their native format. (e.g., CorelDRAW, Illustrator,
or Photoshop) PC-compatible files only. Vector files
preferred. [For text, you must use the "create outlines"
option in Illustrator, or "convert to curve" option in
CorelDRAW.]
❱ Save all rasterized files (e.g., JPEG, TIFF) at 300 dpi min. The
greater the resolution, the better the reproduction quality.
❱ Include the Pantone Matching System (PMS) numbers of
your colors, and font style.
❱ Provide all linked graphics.
❱ Make a test print of your file. If you cannot print it, then
neither can we.
❱ Send your artwork to the MSA distributor who takes
your order.
MSA can ship your new custom-imprinted logo helmets (in min. quantities of as few as 20)
in five working days after artwork proof is approved!
MSA’s Logo Express® Service offers choice of two types of logo imprinting services:
1. Standard printing process prints up to four logo colors on hardhats.
2. Image2000sm Service premium process reproduces photographic images onto the helmet2.
Custom Logo Process Made Simple
Step 1: Choose your hardhat
Refer to MSA's Safety Products Catalog (bulletin #5555-82-MC) for a list of MSA hardhats.
All MSA hardhats can have a custom logo3.
Step 2: Custom logo position
Step 3: Your custom logo
❱ Color(s): For best results, use the Pantone Matching System (PMS), where each color is
represented by a number.
❱ Logo size: If not stated, logo will be sized to appear as large as possible.
❱ Font style: If needed, please note font style of text.
❱ Number of colors: Color limit is four separate colors when using our standard logo process.
Step 4: Approval process
After MSA's Logo Express Service receives all information and artwork required to
customize your hardhats you will be receive a finished design proof.
Questions? Call 800.MSA.LOGO (800.672.5646)
Except for the Skullgard® Helmet and Bump Cap models.
Standard size white V-Gard Helmets only
3
MSA's Bump Cap may have only a one-color logo on front.
1
2
FACE & HEAD PROTECTION
Standard V-Gard® Slotted Cap and Non-Slotted hats
• Products have a polyethylene shell and suspension
that work together to form a protective system
• Available either slotted or non-slotted with either
Staz-On or Fas-Trac Suspension
MFG.#
463942
463943
463944
463945
463946
463948
475358
475359
475360
475361
475362
475364
DESCRIPTION
White V-Gard® Slotted Cap, Staz-on
Suspension
BLUE V-Gard® SLOTTED CAP, STAZ-ON
SUSPENSION
Yellow V-Gard® Slotted Cap, Staz-on
Suspension
Orange V-Gard® Slotted Cap, Staz-on
Suspension
Green V-Gard® Slotted Cap, Staz-on
Suspension
Gray V-Gard® Slotted Cap, Staz-on
Suspension
White V-Gard® Slotted Cap, Fas-Trac
Suspension (Ratchet)
Blue V-Gard® Slotted Cap, Fas-Trac
Suspension (Ratchet)
Yellow V-Gard® Slotted Cap, Fas-Trac
Suspension (Ratchet)
Orange V-Gard® Slotted Cap, Fas-Trac
Suspension (Ratchet)
Green V-Gard® Slotted Cap, Fas-Trac
Suspension (Ratchet)
Gray V-Gard® Slotted Cap, Fas-Trac
Suspension (Ratchet)
•
•
•
•
Standard Size (6-1/2 – 8)
White, Blue, Yellow, Green, Orange, or Gray
V-Gard® Caps and Hats meet or exceed ANSI Z89.1
Class E and G Requirements for Type I Helmets
UOM
MFG.#
EA
454730
EA
454731
EA
454732
EA
454733
EA
454734
EA
454735
EA
475366
EA
475367
EA
475368
EA
475369
EA
475370
EA
496075
DESCRIPTION
Yellow V-Gard® Non-Slotted Hat, Staz-on
Suspension
Gray V-Gard® Non-Slotted Hat, Staz-on
Suspension
Blue V-Gard® Non-Slotted Hat, Staz-on
Suspension
White V-Gard® Non-Slotted Hat, Staz-on
Suspension
Orange V-Gard® Non-Slotted Hat, Staz-on
Suspension
Green V-Gard® Non-Slotted Hat, Staz-on
Suspension
Yellow V-Gard® Non-Slotted Hat, Fas-Trac
Suspension (Ratchet)
Gray V-Gard® Non-Slotted Hat, Fas-Trac
Suspension (Ratchet)
Blue V-Gard® Non-Slotted Hat, Fas-Trac
Suspension (Ratchet)
White V-Gard® Non-Slotted Hat, Fas-Trac
Suspension (Ratchet)
Green V-Gard® Non-Slotted Hat, Fas-Trac
Suspension (Ratchet)
Orange V-Gard® Non-Slotted Hat, Fas-Trac
Suspension (Ratchet)
UOM
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
More Colors Available
V-Gard® Suspensions
• Standard Size (6-1/2 – 8)
• Suspension fits both V-Guard Caps and Hats
MFG.#
10087218
10087220
DESCRIPTION
Replacement Staz-on suspension
Replacement Fas-Trac Suspension
UOM
EA
EA
CAMOUFLAGE V-Gard® HARD Hat
(Standard Size)
• Fas-Trac Suspension
• Meets all ANSI Z289.1, 2003, Class C standards
MFG.#
DESCRIPTION
10103908
Freedom series Camouflage Cap
UOM
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
5
FACE & HEAD PROTECTION
Hi-Viz SunShade accessory
V-Gard® Frame for Slotted Caps
Without Debris
Control
• Breathable, high-visibility mesh
fabric
• Choice of high-visibility yellow-
• Unique frame for use on
lime or orange colors
• Hat clips help to keep SunShade
from falling or rotating
slotted MSA caps
• Patent-pending, stowable
•
•
•
MFG.#
DESCRIPTION
Hi-Viz orange SunShade accessory
w/reflective stripe on yellow-lime band
Hi-Viz yellow-green SunShade accessory
w/reflective stripe on orange band
10098031
10098032
UOM
•
EA
EA
slot adaptors allow frame
to work with or without earmuffs
Patent-pending V-shaped alignment guides and
three touchpoint load for easy visor installation
Sloped design allows material to easily slide off
the frame
Heavy-duty, flat rubber strap allows easy and secure
placement of frame on the cap
All non-metal construction
MFG.#
DESCRIPTION
10121266
V-Gard Frame for Slotted Caps
Without Debris Control
®
UOM
EA
V-Gard® PC Visor, Flat
•
•
•
•
•
•
•
•
Suitable for most applications where impact hazards exist
Provides maximum UV protection
Wider design for improved resistance to impact and splash hazards
Shape accommodates cap-mounted earmuffs
Clear, polycarbonate
7.5 x 17 x 0.04
ANSI/ISEA Z87.1-2010 impact rated
For use with V-Gard® Frames ONLY
MFG.#
DESCRIPTION
10117750
V-Gard® PC Visor, Flat
UOM
EA
Custom Terri Band Sweatband (single)
• Custom design fits all MSA helmets
• Washable, with plastic snaps
MFG.#
DESCRIPTION
10068911
Custom Terri Band Sweatband (single)
UOM
EA
NON-ANSI, HIGH-VIZ,
BEANIE STYLE HAT
• Hi-Visibilty Winter Beannie Cap,
WINTER LINER
Non-ANSI, Reflective Stripe,
• Ideal for use in cold
•
•
•
•
work conditions
Navy Blue
Insulated Ear Barrier
Silver Reflective Strip
One size fits most sizing
MFG.#
364-ML2FB
364-SL2FB
6
DESCRIPTION
MID-LENGTH, COTTON TWILL/FLEECE,
2 LAYER, FR TREATED
SHOULDER LENGTH, COTTON TWILL/
FLEECE, 2 LAYER, FR TREATED
UOM
EA
MFG.#
360-BEANNIELY
360-BEANNIEOR
DESCRIPTION
NON ANSI, HIGH-VIZ, BEANIE STYLE HAT, Yellow
NON ANSI, HIGH-VIZ, BEANIE STYLE HAT, Orange
UOM
EA
EA
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
3M™ Optime™ 101 Cap-mount
Earmuff
• Regular size fits
• Helmet-attachment style
• Excellent attenuation at
most earcanals
• Soft, slow-recovery
foam provides a
low-pressure seal for
excellent attenuation
MFG.#
311-1252
312-1252
low and high frequencies
• For noise levels up to
101 dBA
DESCRIPTION
LARGE, YELLOW NEON, CORDED, 200 PR/BX
LARGE, YELLOW NEON, UNCORDED, 200 PR/BX
UOM
PR
PR
3M™ Pistonz™ Earplugs
MFG.#
DESCRIPTION
H7P3E
Peltor Optime 101 Series Deluxe Green
Helmet Attached Dielectric Earmuffs,
NRR 24 dB
• Stem is stiff enough for insertion,
yet designed to flex sideways
if impacted
• Officially licensed hearing
protection of NASCAR®
• NRR 29 dB
MFG.#
P1401A
HEARING & RESPIRATORY PROTECTION
3M™ E-A-Rsoft™
Yellow Neons™
and Yellow Neon
Blasts™ Earplugs
UOM
EA
3M™ Peltor™
Optime™ 95 Earmuff
DESCRIPTION
Pistonz™ Earplug, Hearing Conservation
P1401A NRR 29 dB, 50 PR/BX, corded
UOM
pr
• For noise levels up to 95 dBA
• Lightweight with liquid/foam
filled ear cushions
• NRR 21 dB
MFG.#
DESCRIPTION
UOM
H6A/V
OVER-THE-HEAD
EA
3M™ Particulate Respirator N95
• 3M’s advanced electret media
• Welded strap attachment
• Adjustable nose clip
MFG.#
DESCRIPTION
8210
N95 Particulate Resp
UOM
BX
Noise Levels
Both the amount of noise and the length of time you are exposed to the noise determine its ability to
damage your hearing. Noise levels are measured in decibels (dB). The higher the decibel level, the louder
the noise. The noise chart below gives an idea of average decibel levels for everyday sounds around you.
Painful
Very Loud
150 dB = rock music peak
80 dB = alarm clock, busy street
140 dB = firearms, air raid siren, jet engine
70 dB = busy traffic, vacuum cleaner
130 dB = jackhammer
60 dB = conversation, dishwasher
120 dB = jet plane take-off, amplified rock music at
4-6 ft., car stereo, band practice
Extremely Loud
110 dB = rock music, model airplane
106 dB = timpani and bass drum rolls
100 dB = snowmobile, chain saw, pneumatic drill
Moderate
50 dB = moderate rainfall
40 dB = quiet room
Faint
30 dB = whisper, quiet library
90 dB = lawn mower, shop tools, truck traffic, subway
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
7
hand protection
MAXIFLEX™ SEAMLESS KNITS FOR
GENERAL DUTY BY ATG®
GREAT WHITE™ Coated Gloves
Made With Dyneema®
• G-Tek® MaxiFlex™ Black
• Cut Level 2
• Great White Dyneema®
•
•
•
•
•
micro-foam nitrile coated palm
& finger tips
15 gauge gray seamless knit
nylon liner
Roll bead cuff for tear
resistance
17-mil thickness
12" length
Used in applications which
require a high degree of
dexterity and sensitivity, especially where grip is
important, such as handling small oily parts and
components, general assembly, machining, microengineering, automotive components, painting, and
horticulture
MFG.#
34-874/S
34-874/M
34-874/L
34-874/XL
DESCRIPTION
G-TEK® MAXIFLEX™, Size Small
G-TEK® MAXIFLEX™, Size Medium
G-TEK® MAXIFLEX™, Size Large
G-TEK® MAXIFLEX™, Size xLARGE
UOM
PR
PR
PR
PR
DESCRIPTION
GREAT WHITE™ DYNEEMA®, Size Small
GREAT WHITE™ DYNEEMA®, Size Medium
GREAT WHITE™ DYNEEMA®, Size Large
GREAT WHITE™ DYNEEMA®, Size Xlarge
UOM
PR
PR
PR
PR
• Cut Level 4
• Twice the cut and abrasion
• G-Tek® value and performance
• Economy-grade black
foam nitrile coated palm
and finger tips
• Ideal for manufacturing
and assembly applications
where abrasion, cut and
puncture resistance is
required
DESCRIPTION
G-TEK® Nylon, Size Small
G-TEK® Nylon, Size Medium
G-TEK® Nylon, Size Large
G-TEK® Nylon, Size XLarge
MFG.#
19-D622/S
19-D622/M
19-D622/L
19-D622/XL
G-Tek® Cut Resistant Gloves White
Knit Dyneema Yarn Gray Coated
G-Tek® NYLON WITH FOAM
NITRILE GRIP
MFG.#
34-C232/S
34-C232/M
34-C232/L
34-C232/XL
white seamless shell, gray
polyurethane coated palm
and fingers
• Washable, resistant to
chemicals, water and
ultraviolet light
• Silicone-free
• Used for electronics,
glass cutting, sheet
material handling, general duty, parts assembly and
construction
•
•
UOM
PR
PR
PR
PR
G-Tek® MaxiFoam Gloves Gray
Coated White Nylon
•
•
•
•
resistance as Dyneema®
Continuous Filament Technology
Gloves are washable
Ultra high strength yarns provide
superior comfort and durability
at the higher levels of cut
resistance standards
Gloves are lighter, thinner, and more
tactile, keeping the wearer’s hands
considerably cooler than gloves made with
other materials
Silicone free
Color coded hems provide easy size identification
Available with coated palm and finger tips, medium
weight
MFG.#
19-D330/S
19-D330/M
19-D330/L
19-D330/XL
• Premium foam nitrile coated
palm and finger tips
• Excellent wet and dry grip
even in oily applications
DESCRIPTION
Yarn Gray Coated, Size Small
Yarn Gray Coated, Size Medium
Yarn Gray Coated, Size Large
Yarn Gray Coated, Size XLarge
UOM
PR
PR
PR
PR
• Minimal penetration (strike
through) keeps the liner soft
on the inside of the glove
• Excellent dexterity, sensitivity
and tactility
• Designed to produce minimal
lint and dust
MFG.#
34-800/S
34-800/M
34-800/L
34-800/XL
8
DESCRIPTION
Gray Coated White Nylon, Size Small
Gray Coated White Nylon, Size Medium
Gray Coated White Nylon, Size Large
Gray Coated White Nylon, Size XLarge
UOM
PR
PR
PR
PR
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
G-Tek® Kevlar®
Gloves With Crinkle
Finish Latex
• Cut Level 2
• Sleeves made with Spun
• Cut Level 3
• 100% Kevlar® shell with blue
Dyneema® Sleeves, 16-inch
length, gray
• Seamless knit construction
provides comfort, fit and dexterity
• Special non-latex cuff
dramatically reduces cuff
blow-out, even after multiple
launderings in bleach
MFG.#
20-sd14
20-sd16
20-sd18
latex coating on palm
• Full thumb & fingertips
• Knitwrist for secure fit
• Palm and finger tip coated for
improved grip
• Used for material handling,
DESCRIPTION
UOM
Dyneema® Cut-Resistant 14 in. Gray Sleeve
EA
Dyneema® Cut-Resistant 16 in. Gray Sleeve
EA
Dyneema® Cut-Resistant 18 in. Gray Sleeve
EA
Split Leather
Palms With Safety
Cuffs
DESCRIPTION
Split Leather Palms, Size Small
Split Leather Palms, Size Medium
Split Leather Palms, Size Large
Split Leather Palms, Size Xlarge
MFG #
09-K1310/S
09-K1310/M
09-K1310/L
09-K1310/XL
DESCRIPTION
G-Tek® Kevlar® with Crinkle, Size Small
G-Tek® Kevlar® with Crinkle, Size Medium
G-Tek® Kevlar® with Crinkle, Size Large
G-Tek® Kevlar® with Crinkle, Size xlarge
provide light duty
comfortable hand protection
• Blended styles shrink less
after getting wet
• Brown, economy weight,
clute pattern, Knitwrist
UOM
DZ
DZ
DZ
DZ
MFG.#
DESCRIPTION
95-806
JERSEY GLOVE, BROWN, ECONOMY WEIGHT,
CLUTE PATTERN, KNITWRIST
DZ
• Maximum Safety® Journeyman
professional workman's glove
• Mens top grain cowhide
• Brown goatskin leather
•
•
•
•
•
• Hi-vis yellow knuckle
leather driver glove
Keystone thumb
Regular grade
Unlined
Shirred elastic wrist
Used in construction,
machine operation,
light-duty welding, utility work,
farming, roping, and many
other general applications
DESCRIPTION
TOP GRAIN COWHIDE DRIVERS, Size small
TOP GRAIN COWHIDE DRIVERS, Size Medium
TOP GRAIN COWHIDE DRIVERS, Size large
TOP GRAIN COWHIDE DRIVERS, Size xlarge
UOM
JOURNEYMAN “New-Tech”
Drivers Style
Top Grain Cowhide Leather
Driver’s Gloves
MFG.#
68-163/S
68-163/M
68-163/L
68-163/XL
UOM
pr
pr
pr
pr
• Brahma jersey gloves
leather palm glove
Blue, black, & red striped fabric
Wing thumb
Knuckle strap
Cotton lined palm
Used for construction, material
handling and general maintenance
MFG.#
84-7532/S
84-7532/M
84-7532/L
84-7532/XL
glass handling operations, fishing industries,
sanitation, general maintenance, woodworking and
waste handling & recycling
Cotton/Polyster Blend
• Mens C-grade cowhide split
•
•
•
•
•
HAND PROTECTION
Dyneema® Cut-Resistant Gray
Sleeves
reinforced palm and back
protector
• Ideal for heavy / light
construction, auto repair,
demolition, manufacturing,
mining, fabrication, and
landscaping
MFG.#
UOM
PR
PR
PR
PR
DESCRIPTION
MAXIMUM SAFETY® JOURNEYMAN,
120-4200/S
Size Small
MAXIMUM SAFETY® JOURNEYMAN,
120-4200/M
Size Medium
MAXIMUM SAFETY® JOURNEYMAN,
120-4200/L
Size Large
MAXIMUM SAFETY® JOURNEYMAN,
120-4200/XL
Size Xlarge
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
UOM
PR
PR
PR
PR
9
HAND PROTECTION
GUNNER Workman’s Glove
Powder Free Nitrile Glove
• Maximum Safety® Gunner
• Ambi-dex disposable nitrile, food grade,
•
• Economical puncture resistance
•
•
•
•
•
professional workman's glove
Tan goatskin leather reinforced
palm
Fabric back
Half-finger
Hook and loop closure
PVC sandy grip
Ideal for light
construction, auto repair, manufacturing, fabrication,
and landscaping
MFG.#
120-4300/S
120-4300/M
120-4300/L
120-4300/XL
DESCRIPTION
Maximum Safety® Gunner, Size Small
Maximum Safety® Gunner, Size Medium
Maximum Safety® Gunner, Size Large
Maximum Safety® Gunner, Size Xlarge
UOM
PR
PR
PR
PR
4 mil., textured grip
with great comfort
• Contains no natural rubber
latex proteins
• Blue color
• Packaged 100 per box
MFG.#
DESCRIPTION
Ambi-dex Disposable Nitrile Gloves 63-532PF/S
Powder Free, Size Small
Ambi-dex Disposable Nitrile Gloves 63-532PF/M
Powder Free, Size Medium
Ambi-dex Disposable Nitrile Gloves 63-532PF/L
Powder Free, Size Large
Ambi-dex Disposable Nitrile Gloves 63-532PF/XL
Powder Free, Size XLarge
UOM
BX
BX
BX
BX
How do I know what glove to use?
First you should determine the maximum voltage that you will be exposed to during your work. Once you
have determined the risk, you can use the chart below to determine the appropriate class of glove that will
provide you the protection required to compete your job safely. Each class of gloves is clearly marked with the
maximum use voltage on the permanent color coded label.
CLASS
TEST AC
VOLTS
USE AC
VOLTS
USE DC
VOLTS
LABEL
COLOR
00
2,500
500
750
Beige
LABEL IMAGE
NOVAX® by G.B. INDUSTRIES
ANSI / ASTM Made in D120
Class 00
Malaysia Type 1
Max Use Volt 500V AC
0
5,000
1,000
1,500
Red
NOVAX® by G.B. INDUSTRIES
ANSI / ASTM Made in D120
Class 0
Malaysia Type 1
Max Use Volt 1000V AC
1
10,000
7,500
11,250
White
NOVAX® by G.B. INDUSTRIES
ANSI / ASTM Made in D120
Class 1
Malaysia Type 1
Max Use Volt 7500V AC
2
20,000
17,000
25,500
Yellow
NOVAX® by G.B. INDUSTRIES
ANSI / ASTM Made in D120
Class 2
Malaysia Type 1
Max Use Volt 17000V AC
3
30,000
26,500
39,750
Green
NOVAX® by G.B. INDUSTRIES
ANSI / ASTM Made in D120
Class 3
Malaysia Type 1
Max Use Volt 26500V AC
4
40,000
36,000
54,000
Orange
NOVAX® by G.B. INDUSTRIES
ANSI / ASTM Made in D120
Class 4
Malaysia Type 1
Max Use Volt 36000V AC
10
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
HAND PROTECTION
NOVAX® Rubber Insulating Glove Kits
• Rubber Insulating Glove Kits include rubber insulating
gloves, leather protectors and storage bag
• Choose from black or orange rubber gloves
MFG.#
147-SK-00/7
147-SK-00/8
147-SK-00/9
147-SK-00/10
147-SK-00/11
147-SK-00/12
147-SK-0/7
147-SK-0/8
147-SK-0/9
147-SK-0/10
147-SK-0/11
147-SK-0/12
147-SK-1/7
147-SK-1/8
147-SK-1/9
147-SK-1/10
147-SK-1/11
147-SK-1/12
147-SK-2/7
147-SK-2/8
147-SK-2/9
147-SK-2/10
147-SK-2/11
147-SK-2/12
DESCRIPTION
Class 00, Sz 7, Orange ESP, Goatskin
protector
Class 00, Sz 8, Orange ESP, Goatskin
protector
Class 00, Sz 9, Orange ESP, Goatskin
protector
Class 00, Sz 10, Orange ESP, Goatskin
Protector
Class 00, Sz 11, Orange ESP, goatskin
Protector
Class 00, Sz 12, Orange ESP, goatskin
protector
Class 0, Sz 7, Orange ESP, Goatskin
protector
Class 0, Sz 8, Orange ESP, Goatskin
protector
Class 0, Sz 9, Orange ESP, Goatskin
protector
Class 0, Sz 10, Orange ESP, Goatskin
protector
Class 0, Sz 11, Orange ESP, Goatskin
protector
Class 0, Sz 12, Orange ESP, Goatskin
protector
Class 1, Sz 7, Orange ESP, Cowhide
protector
Class 1, Sz 8, Orange ESP, Cowhide
protector
Class 1, Sz 9, Orange ESP, Cowhide
protector
Class 1, Sz 10, Orange ESP, Cowhide
Protector
Class 1, Sz 11, Orange ESP, Cowhide
protector
Class 1, Sz 12, Orange ESP, Cowhide
protector
Class 2, Sz 7, Orange ESP, Cowhide
protector
Class 2, Sz 8, Orange ESP, Cowhide
protector
Class 2, Sz 9, Orange ESP, Cowhide
protector
Class 2, Sz 10, Orange ESP, Cowhide
protector
Class 2, Sz 11, Orange ESP, Cowhide
Protector
Class 2, Sz 12, Orange ESP, Cowhide
Protector
• Classes 00 through 2
• Available sizes 7 through 12
UOM
EA
MFG.#
150-SK-00/7
EA
150-SK-00/8
EA
150-SK-00/9
EA
150-SK-00/10
EA
150-SK-00/11
EA
150-SK-00/12
EA
150-SK-0/7
EA
150-SK-0/8
EA
150-SK-0/9
EA
150-SK-0/10
EA
150-SK-0/11
EA
150-SK-0/12
EA
150-SK-1/7
EA
150-SK-1/8
EA
150-SK-1/9
EA
150-SK-1/10
EA
150-SK-1/11
EA
150-SK-1/12
EA
150-SK-2/7
EA
150-SK-2/8
EA
150-SK-2/9
EA
150-SK-2/10
EA
150-SK-2/11
EA
150-SK-2/12
DESCRIPTION
Class 00, Sz 7, Black ESP, Goatskin
protector
Class 00, Sz 8, Black ESP, Goatskin
protector
Class 00, Sz 9, Black ESP, Goatskin
protector
Class 00, Sz 10, Black ESP, Goatskin
protector
Class 00, Sz 11, Black ESP, Goatskin
protector
Class 00, Sz 12, Black ESP, Goatskin
protector
Class 0, Sz 7, Black ESP, Goatskin
protector
Class 0, Sz 8, Black ESP, Goatskin
Protector
Class 0, Sz 9, Black ESP, Goatskin
protector
Class 0, Sz 10, Black ESP, Goatskin
protector
Class 0, Sz 11, Black ESP, Goatskin
Protector
Class 0, Sz 12, Black ESP, Goatskin
Protector
Class 1, Sz 7, Black ESP, Cowhide
protector
Class 1, Sz 8, Black ESP, Cowhide
protector
Class 1, Sz 9, Black ESP, Cowhide
protector
Class 1, Sz 10, Black ESP, Cowhide
protector
Class 1, Sz 11, Black ESP, Cowhide
protector
Class 1, Sz 12, Black ESP, Cowhide
protector
Class 2, Sz 7, Black ESP, Cowhide
protector
Class 2, Sz 8, Black ESP, Cowhide
protector
Class 2, Sz 9, Black ESP, Cowhide
protector
Class 2, Sz 10, Black ESP, Cowhide
protector
Class 2, Sz 11, Black ESP, Cowhide
Protector
Class 2, Sz 12, Black ESP, Cowhide
protector
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
UOM
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
11
HAND PROTECTION
NOVAX® Class 00 Gloves
NOVAX® Class 1 and 2 Gloves
• Individually tested to meet ANSI/
• Individually tested to meet ANSI/
ASTM D120 Standard and NFPA
70E for use around Electrical
Hazards and Arc Flash protection
• The contoured shape reduces
hand fatigue
• Max Use Voltage: Class
00-500AC/750DC
MFG.#
147-00-11/7
147-00-11/8
147-00-11/9
147-00-11/10
147-00-11/11
147-00-11/12
150-00-11/7
150-00-11/8
150-00-11/9
150-00-11/10
150-00-11/11
150-00-11/12
DESCRIPTION
ORANGE, Class 00, Sz 7
ORANGE, Class 00, Sz 8
ORANGE, Class 00, Sz 9
ORANGE, Class 00, Sz 10
ORANGE, Class 00, Sz 11
ORANGE, Class 00, Sz 12
BLACK, Class 00, Sz 7
BLACK, Class 00, Sz 8
BLACK, Class 00, Sz 9
BLACK, Class 00, Sz 10
BLACK, Class 00, Sz 11
BLACK, Class 00, Sz 12
ASTM D120 Standard and NFPA
70E for use around Electrical
Hazards and Arc Flash protection
• The contoured shape reduces
hand fatigue
• Max Use Voltage: Class
1-7,500AC/11,250DC Class
2-17,000AC/25,500DC
UOM
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
NOVAX® Class 0 Gloves
• Individually tested to meet ANSI/
ASTM D120 Standard and NFPA
70E for use around Electrical
Hazards and Arc Flash protection
• Max Use Voltage: Class
0-1,000AC/1,500DC
MFG.#
147-0-11/7
147-0-11/8
147-0-11/9
147-0-11/10
147-0-11/11
147-0-11/12
150-0-11/7
150-0-11/8
150-0-11/9
150-0-11/10
150-0-11/11
150-0-11/12
155-0-11/7
155-0-11/8
155-0-11/9
155-0-11/10
155-0-11/11
155-0-11/12
12
DESCRIPTION
Orange, Class 0, Sz 7
Orange, Class 0, Sz 8
Orange, Class 0, Sz 9
Orange, Class 0, Sz 10
Orange, Class 0, Sz 11
Orange, Class 0, Sz 12
Black, Class 0, Sz 7
Black, Class 0, Sz 8
Black, Class 0, Sz 9
Black, Class 0, Sz 10
Black, Class 0, Sz 11
Black, Class 0, Sz 12
Black/Orange, Class 0, Sz 7
Black/Orange, Class 0, Sz 8
Black/Orange, Class 0, Sz 9
Black/Orange, Class 0, Sz 10
Black/Orange, Class 0, Sz 11
Black/Orange, Class 0, Sz 12
UOM
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
MFG.#
147-1-14/7
147-1-14/8
147-1-14/9
147-1-14/10
147-1-14/11
147-1-14/12
147-2-14/7
147-2-14/8
147-2-14/9
147-2-14/10
147-2-14/11
147-2-14/12
150-1-14/7
150-1-14/8
150-1-14/9
150-1-14/10
150-1-14/11
150-1-14/12
150-2-14/7
150-2-14/8
150-2-14/9
150-2-14/10
150-2-14/11
150-2-14/12
155-1-14/7
155-1-14/8
155-1-14/9
155-1-14/10
155-1-14/11
155-1-14/12
155-2-14/7
155-2-14/8
155-2-14/9
155-2-14/10
155-2-14/11
155-2-14/12
DESCRIPTION
Orange, Class 1, Sz 7
Orange, Class 1, Sz 8
Orange, class 1, Sz 9
Orange, Class 1, Sz 10
Orange, Class 1, Sz 11
Orange, Class 1, Sz 12
Orange, Class 2, Sz 7
Orange, Class 2, Sz 8
Orange, Class 2, Sz 9
Orange, Class 2, Sz 10
Orange, Class 2, Sz 11
Orange, Class 2, Sz 12
Black, Class 1, Sz 7
Black, Class 1, Sz 8
Black, Class 1, Sz 9
Black, Class 1, Sz 10
Black, Class 1, Sz 11
Black, Class 1, Sz 12
black, Class 2, Sz 7
Black, Class 2, Sz 8
Black, Class 2, Sz 9
Black, Class 2, Sz 10
Black, Class 2, Sz 11
Black, Class 2, Sz 12
Black/Orange, Class 1, Sz 7
Black/Orange, Class 1, Sz 8
Black/Orange, Class 1, Sz 9
Black/Orange, Class 1, Sz 10
Black/Orange, Class 1, Sz 11
Black/Orange, Class 1, Sz 12
Black/Orange, Class 2, Sz 7
Black/Orange, Class 2, Sz 8
Black/Orange, Class 2, Sz 9
Black/Orange, Class 2, Sz 10
Black/Orange, Class 2, Sz 11
Black/Orange, Class 2, Sz 12
UOM
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
Cowhide Leather Protector for
Class 1-2 Gloves
• Top grain goatskin leather
• Available with gauntlet or driver
• Straight thumb
• Nylon pull strap
• Gauntlet cuff
cuff
• Leather protectors are to be used
only for mechanical protection for
rubber gloves and mittens and
shall not be used for electrical
protection per ASTM F696-02
• The correct length of leather
protector use is found in ASTM
F496-06
MFG.#
148-1000/7
148-1000/8
148-1000/9
148-1000/10
148-1000/11
148-1000/12
DESCRIPTION
CLASS 00-0; SZ 7
CLASS 00-0; SZ 8
CLASS 00-0; SZ 9
CLASS 00-0; SZ 10
CLASS 00-0; SZ 11
CLASS 00-0; SZ 12
UOM
PR
PR
PR
PR
PR
PR
MFG.#
148-4000/7
148-4000/8
148-4000/9
148-4000/10
148-4000/11
148-4000/12
DESCRIPTION
CLASS 1-2; SZ 7
CLASS 1-2; SZ 8
CLASS 1-2; SZ 9
CLASS 1-2; SZ 10
CLASS 1-2; SZ 11
CLASS 1-2; SZ 12
HAND PROTECTION
Goatskin Leather Protector for
Class 00-0 Gloves
UOM
PR
PR
PR
PR
PR
PR
Protective Bag for Rubber
Insulating Gloves
• Nylon rubber glove storage bags
• 11" or 14" lengths
MFG.#
148-2136
148-2142
DESCRIPTION
Black For Use with 11" Gloves
Black For Use with 14" Gloves
UOM
EA
EA
CLEANING AND STORAGE
How should rubber insulating gloves be cleaned?
Wash in warm water (85°F) with mild detergent, disinfect with a small amount of chlorine bleach. Air or tumble dry
at low heat (165°F). Gloves many be dusted lightly with talc to reduce tackiness.
How should rubber insulating gloves be stored?
Rubber Insulating Gloves should be stored in a glove bag, finger tips up, hung not laid flat. Leather protectors
should be removed before storage. Never fold gloves. Store in as dry and cool (95°F maximum) location as
possible, away from sources of ozone and direct sunlight.
Type I gloves are not considered to be resistant to ozone while Type II gloves are considered to be resistant
to ozone. Type I gloves are generally made from natural rubber and Type II gloves are generally made from a
synthetic rubber such as EPDM (ethylene propylene diene monomer).
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
13
FALL PROTECTION
Workman® Harness
ArcSafe® Lanyard
• The Workman® Harness provides
• ArcSafe® Lanyards are SEI-certified
comfortable protection, due to its
lightweight components and durable
webbing
• The vest-style harness, with optional hip
D-rings for work positioning, fits a wide
range of body types and sizes
• Color-contrasting thigh and torso straps
simplify donning
MFG.#
10072487
10072488
10072491
10072492
DESCRIPTION
Standard Qwik Fit Chest and tongue
buckle leg straps, back D-Ring
XLarge Qwik Fit Chest and tongue buckle
leg straps with back D-Ring
Standard Size Qwik Fit Chest and leg
buckles, back and hip D-Ring
xLarge Qwik Fit Chest and leg buckles
with back and hip D-Ring
•
•
•
UOM
EA
EA
EA
EA
•
•
•
to the requirements of ASTM F88705 standard for electrical arc flash
protection
ArcSafe® Shock-Absorbing Lanyards
utilize a tear-tape design to keep fall
arrest forces below 900 lbs
Constructed of nylon webbing
Includes sewn loop on shockabsorber end, and LS snaphook on
lanyard leg
Incorporates a protective cover over
the shock-absorber
Adjustable in length
Other styles available
MFG.#
10060139
10060140
Workman® Construction
Harness
DESCRIPTION
Single Leg Lanyard 36C Harness and
Anchorage connection
Twin Leg Lanyard 36C Harness and
Anchorage connection
UOM
EA
EA
Workman® Energy-Absorbing
Lanyard
• The Workman® Construction Harness
also offers shoulder pads and an
integral back pad for added comfort
during work positioning and a
removable, tongue-buckle tool belt
• Back and hip D-rings
• Other styles available
MFG.#
DESCRIPTION
UOM
10077571
QWIK-FIT CHEST AND LEG STRAPS, HIPS &
BACK D-RING, SZ XL
EA
• Workman® Shock-Absorbing lanyards are lightweight
with a low-profile body
• The shock absorber includes a clear, durable
ArcSafe® Fall
Protection Products
protective cover over the labels to increase service life
and allow for easy inspection
• Other styles available
• ArcSafe® vest-style harnesses
• All styles include back web loops
MFG.#
and Qwik-Fit chest strap
• Other styles available
10072474
10072473
10076124
10072475
MFG #
10070443
10070444
14
DESCRIPTION
ArcSafe® Standard Vest with Qwik-Fit leg
buckles, back and hip D-rings
ArcSafe® xLarge Vest with Qwik-Fit leg
buckles, back and hip D-rings
DESCRIPTION
Workman® Single leg,
LC Anchorage Connection
Workman® Twin leg tie back,
LC Anchorage Connection
Workman® Single leg, LC Connection,
GL3100 Anchorage Connection
Workman® Twin leg Tie Back,
GL3100 Anchorage Connection
UOM
EA
EA
EA
EA
UOM
EA
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
• Allows workers to
relieve pressure by
inserting a foot into
one of the steps
loops and then
standing up in the
harness
• Max. working load
800 lb
• Strap material
nylon, strap width 1"
• 400 lbs working capacity
• Industrial load indicators
• No annual factory
recertification required
MFG.#
10093350
10093348
10120052
10118937
DESCRIPTION
12' with 1" Steel Carabiner with
LC Snaphook
12' LI SNAPHOOK SELF RETRACT LANYARD
twin leg pfl 6' 36c snaphook
TWIN LEG 36CL REBAR HARNESS
FALL PROTECTION
Safety Step Suspension Straps
Workman® PFL (Personal Fall
Limiter) Lanyard
MFG.#
DESCRIPTION
10063431
Trauma Strap W/Carabiner
UOM
EA
UOM
EA
EA
EA
EA
Bucket of Safety
Carabiners
• MSA offers a wide variety of carabiners
for almost every application
• All carabiners have a minimum
breaking strength of 5,000 lbs
• More styles available
MFG.#
DESCRIPTION
10089207
Steel 1" gate, 3,600 lb rating
UOM
ea
Anchorage Connector Strap
• Standard 5’ length, custom
lengths available
• D-ring on one end and a
sewn loop on the other end
MFG.#
DESCRIPTION
505282
D-Ring on One End and a Sewn Loop
on the Other, 5 ft
UOM
EA
•
•
•
•
•
•
White V-Gard® Cap with Fas-Trac Suspension (ratchet)
Sierra Eyewear, teal frame, clear lens
Ear Plugs
Workman® Harness, standard size
Workman® Single Leg Lanyard, 6’ adjustable
White Bucket, 6-gallon
MFG.#
DESCRIPTION
10110690
IT - BUCKET OF SAFETY withWorkman
Harness and single leg Lanyard Bucket
O Safety with Workman Harness (back D
Rings, standard size) and 6 ft single leg
lanyard. Contents: V Gard Cap with FasTrac Suspension, Safety Eyewear Sierra
Teal clear lens, Ear Plugs in 6 Gal. White
Bucket
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
UOM
EA
15
FIRE PROTECTION
3M™ Fire Barrier Cast-in Device
for Metal Pipes
3M™ Fire Barrier Water Tight
Sealant 3000 WT
• Intumescent device that
• Ready-to-use, high-performance,
firestops 3" or 4" diameter
metallic penetrations
through fire-rated concrete
floor assemblies
• The device is installed by
attaching directly to the form
before a concrete slab is poured
• Provides up to 3-hour fire protection
MFG.#
3MCID
4MCID
DESCRIPTION
Fire Barrier Cast-in, 3"
Fire Barrier Cast-in, 4"
single component, neutral cure,
intumescent silicone firestop that
also acts as a barrier to water
leakage and airborne sound
transmission
• Provides up to 4-hour fire protection
UOM
ea
ea
MFG.#
3000WT-10.1oz
3M Fire Barrier Pass-Through
Device
™
• A firestop solution
for electrical, data,
communications cable or
pipes penetrating
fire-rated floors or
walls
• Provides up
to 3-hour fire
protection
3000WT-20oz
DESCRIPTION
Water TIght Sealant 10.1 FL Oz
Cartridge
Water TIght Sealant 20 FL Oz Sausage
UOM
ea
EA
3M™ Fire Barrier Sealant
CP 25WB+
• Our premium, intumescent latex/waterbased caulk
• Water based - easy cleanup and routine
disposal with no special handling
• One-part system - no mixing or measuring
required
MFG.#
PT2RD
PT4RD
DESCRIPTION
2" round device
4" round device
UOM
ea
ea
3M™ Fire Barrier Pass-Through
Mounting Bracket
• Intumescent and endothermic
• Provides up to 4 hours of protection
MFG #
CP-25WB+
CP-25WB+20oz
DESCRIPTION
Fire Barrier CP 25WB+ 10.1 FL Oz
Cartridge
Fire Barrier CP 25WB+ 20 FL Oz
Sausage
UOM
EA
EA
• Used in conjunction with the 2" or
4" Round 3M™ Fire Barrier
Pass-Through Device
3M™ Fire Barrier Sealant
IC 15WB+
• A water-based latex, intumescent smoke
MFG. #
PT2RMB
PT4RMB
DESCRIPTION
Mounting Bracket, 2" ROUND
Mounting Bracket, 4" ROUND
UOM
EA
EA
3M™ Fire Barrier Ultra
Plastic Pipe Device
MFG.#
• A firestop system for up to 3"
(76.2 mm) or 4" (101.6 mm)
non-metallic pipes that penetrate
through fire-rated walls or floors
• The one-piece metal collar
assembly encases 3M™
Fire Barrier Wrap Strip Ultra GS intumescent material,
providing up to 3-hour fire protection
MFG.#
Ultra PPD 3
Ultra PPD 4
16
DESCRIPTION
Fire Barrier Ultra PPD 3"
Fire Barrier Ultra PPD 4"
and firestopping sealant for wall and floor
penetrations
• Easy-to-handle formulation that bonds to
gypsum wallboard, concrete, metals, wood,
plastic and cable jacketing
• Dries to a firm, rubber-like solid
• Provides up to 2 hours of fire protection
IC-15WB+-10.1oz
IC-15WB+-20oz
IC-15WB+-4.5gal
DESCRIPTION
Fire Barrier IC 15wb+ 10.1 FL Oz
Cartridge
Fire Barrier IC 15wb+ 20 FL Oz
Sausage
Fire Barrier IC 15wb+ 4.5 Gallon
Pail
UOM
EA
EA
EA
UOM
EA
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
• Self-contained,
intumescent
product for use in
a wide variety of
through-penetration
firestops including
cable trays, conduit and blank openings
• Provides up to 3-hours of fire protection
• Medium pillow: 2" x 6" x 9"
• One-part, halogen-free product designed to
firestop electrical outlet boxes and a wide
variety of through-penetrations including cable,
conduit, insulated pipe and metal pipe, which
penetrate fire-rated construction
• Moldable putty stick
• 1.5" x 6"
MFG.#
DESCRIPTION
MP+Stick
Moldable Putty stick 1.5" x 6"
FIRE PROTECTION
3M™ Fire Barrier Pillows
3M™ Fire Barrier Moldable
Putty Stix MP+
MFG.#
DESCRIPTION
FB-269
Fire Barrier Pillow 2" X 6" X 9"
UOM
ea
UOM
ea
3M™ Fire Barrier Packing Material
3M™ Fire Barrier Moldable Putty
Pads MPP+
• Designed for use as a
one part, intumescent fire
resistive putty used to
restore the integrity of fire
rated building construction
• Moldable putty pad made of
synthetic elastomer
• 1/8" thick, 7" x 7"
MFG.#
DESCRIPTION
UOM
MPP+7"x7"
Moldable Putty 7" X 7" X 1/8" Pad
ea
• An easy-to-dispense, non-
asbestos, inorganic material
designed to be used as an
alternative packing material
to mineral wool, fiberglass
and backer rod in throughpenetration firestop systems
• With excellent strength and
flexibility characteristics it is
an ideal through-penetration
packing material
MFG.#
DESCRIPTION
PM4-BULK
Fire Barrier Packaging Material 4" x 20.5'
UOM
ea
3M™ Manual Applicator
• High quality
• Manual driven
MFG.#
DESCRIPTION
62830
Manual Applicator 310M for 310 mL 10 oz
UOM
EA
62832
Manual Applicator 600M for 600mL Sausage Packs 20 oz
EA
M18™ Cordless Caulk and Adhesive Gun Kit
•
•
•
•
•
M18™ Caulk Gun
(1) M18™ Compact RED LITHIUM™ Battery
(1) 30-Minute Charger
(1) 10 oz Carriage
(1) 10 oz Plunger Rod and Piston Assembly
MFG.#
DESCRIPTION
2641-21CT
M18™ Cordless 10oz. Caulk and Adhesive Gun Kit
EA
2643-21CT
M18™ Cordless 20oz. Clear Barrell Sausage Style Caulk and Adhesive Gun Kit
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
UOM
17
first aid & safety vests
First Aid Kits
•
•
•
•
Meets ANSI Z308.1-2009 Standard requirements for Type III First Aid Kit
Dispenser tray helps keep contents organized
Includes major wound bandage and instance cold pack
Includes premium first aid components such as a CPR barrier
and eyewash in addition to the essentials
MFG.#
DESCRIPTION
10070148
All Purpose First Aid Kit
UOM
EA
10049586
160-Piece First Aid Kit
EA
Economy Mesh
Vest, Velcro
Closure
Economy Mesh
Vest, Zipper
Closure
•
•
•
•
•
•
•
•
ANSI 107-2010 Class 2 vest
Hook and loop fastening
2" Silver reflective tape
Mesh fabric
MFG.#
DESCRIPTION
UOM
302-MVGOR-M
Mesh, Orange, Size Medium
EA
302-MVGOR-L
Mesh, Orange, Size Large
EA
302-MVGOR-XL
Mesh, Orange, Size XLarge
EA
302-MVGOR-2X
Mesh, Orange, Size 2XLarge
EA
302-MVGOR-3X
Mesh, Orange, Size 3XLarge
EA
302-MVGOR-4X
Mesh, Orange, Size 4XLarge
EA
302-MVGOR-5X
Mesh, Orange, Size 5XLarge
EA
ANSI 107-2010 Class 2 vest
Zipper fastening
2" Silver reflective tape
Mesh fabric
MFG.#
DESCRIPTION
302-MVGLY-M
302-MVGLY-L
302-MVGLY-XL
302-MVGLY-2X
302-MVGLY-3X
302-MVGLY-4X
302-MVGLY-5X
Mesh, Lime-Yellow, SZ M
Mesh, Lime-Yellow, SZ L
Mesh, Lime-Yellow, SZ XL
Mesh, Lime-Yellow, SZ 2XL
Mesh, Lime-Yellow, SZ 3XL
Mesh, Lime-Yellow, SZ 4XL
Mesh, Lime-Yellow, SZ 5XL
UOM
EA
EA
EA
EA
EA
EA
EA
Safety Gear
Class 2 Vest
•
•
•
•
•
18
ANSI 107-2010 Class 2 vest
Zipper fastening
2" silver reflective tape
4 pockets
Mesh fabric
MFG.#
DESCRIPTION
UOM
302-MVGZ4PLY-M
Mesh, Lime-Yellow w/ 4 pockets,
Size Medium
EA
302-MVGZ4PLY-L
Mesh, Lime-Yellow w/ 4 pockets,
Size Large
EA
302-MVGZ4PLY-XL
Mesh, Lime-Yellow w/ 4 pockets,
Size XLarge
EA
302-MVGZ4PLY-2X
Mesh, Lime-Yellow w/ 4 pockets,
Size 2XLarge
EA
302-MVGZ4PLY-3X
Mesh, Lime-Yellow w/ 4 pockets,
Size 3XLarge
EA
302-MVGZ4PLY-4X
Mesh, Lime-Yellow w/ 4 pockets,
Size 4XLarge
EA
302-MVGZ4PLY-5X
Mesh, Lime-Yellow w/ 4 pockets,
Size 5XLarge
Ask
About the
Logo
Program
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
PROTECTIVE CLOTHING & barricade TAPE
Three Piece Rainsuit
• Ideal for construction,
•
•
•
•
municipalities, shipyards,
agriculture chemical spraying
and industrial plant maintenance
3-piece rainsuit, PVC/Polyester
.35mm thick
Jacket with detachable hood
Corduroy collar Bib overall
yellow
MFG.#
SIZE
UOM
201-350S
Small
EA
201-350M
Medium
EA
201-350L
Large
EA
201-350X1
Extra Large
EA
201-350X2
2X Large
EA
201-350X3
3X Large
EA
201-350X4
4X Large
EA
201-350X5
5X Large
EA
Scotch® Barricade Tape 374 CAUTION DO NOT ENTER
• Yellow polyethylene plastic with black letters
MFG.#
DESCRIPTION
UOM
374
3" x 300', 2 mil, yellow
EA
Scotch® Detectable Buried Barricade Tape 406 -CAUTION BURIED ELECTRIC LINE BELOW
• Solid aluminium foil backing with a clear film laminate red with black letters
MFG.#
DESCRIPTION
406
Scotch® Detectable Buried Barricade Tape 406
CAUTION BURIED ELECTRIC LINE BELOW, 5 mil, Red
UOM
EA
Scotch® 300 Series Barricade Tape -- CAUTION
• Yellow polyethylene plastic with black letters
MFG.#
DESCRIPTION
301
Barricade Tape 301 CAUTION, 2 mil, Yellow, 3" x 300'
EA
302
CAUTION BURIED ELECTRIC LINE BELOW, 3" x 1,000'
EA
300
Scotch Buried Barricade Tape, 2 mil, Yellow, 3" x 1,000'
EA
303
Scotch® Buried Barricade Tape, 4 mil, Red, 3" x 300'
EA
368
Scotch Buried Barricade Tape, 4 mil, Red, 6" x 1,000'
EA
®
®
UOM
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
19
FLASHLIGHTS
Industrial 2D Professional
Flashlight
industrial grade virtually
industructible flashlight
• Toolbox tough flashlight with krypton bulb
• Durable polypropylene construction
• High performance LED, designed
for durability and simplicity
• 30 ft drop test performance!
• Rubber head and tail cap – shock
-7 ft. drop tested
• Protected slide switch
• Water, chemical, oil & grease
resistant
• Runs on 2D batteries, included
MFG.#
DESCRIPTION
IN2-K
Industrial 2D Professional
Flashlight - Krypton Bulb
UOM
ea
Industrial 6V beam Lantern
•
•
•
•
•
•
•
Industrial toolbox tough lantern
Adjustable stand
Long-range krypton beam
Hands free stand: 45° swivel
Comfort-grip handle
Runs on 6V battery, included
Water resistant & floating
MFG.#
DESCRIPTION
I6V-B2
Industrial Lantern, Adjustable
Stand, Krypton Bulb
UOM
ea
Lumens (low) and strobe
hrs (low) 8 hrs (strobe)
• Holster included
• Runs on 3AAA alkaline batteries, included
• Aircraft grade aluminum body
DESCRIPTION
DESCRIPTION
DIY3AAA-B
Indestructible Grade Flashlight
•
•
•
•
•
•
•
•
• Spot to flood focus
• Run time: 2 hrs (high) 6
200 Lumen Metal Flashlight
MFG.#
UOM
ea
• High performance LED,
• High performance Cree XRE LED
• 200 Lumens (high) 70
MFG.#
absorbers
Aluminum titanium alloy - toughness
Impact resisting internal engineering
Protected tactical tail cap switch
Runs on 3AAA alkaline batteries, included
Run time: 5 hours, 40 Hours (energy saver mode)
industrial grade, virtually
indestructible lantern
Roughneck high performance
led flashlight
RNT3AAA-B
•
•
•
•
•
UOM
designed for durability &
simplicity
150 Lumens (high) 50 Lumens
(low)
15 ft drop test performance!
Rubber head – shock absorbers
Push button switch on handle for
easy use
Runs on 4C Alkaline batteries, included
Run time: 20 hours, 78 hours (energy saver mode)
Beam distance: 350m
Water resistant (IPX4)
MFG.#
DESCRIPTION
DIYBEAM-B
Indestructible Grade Lantern
UOM
ea
sportsman XTREME led metal
flashlight
ea
roughneck high performance
led headlight
•
•
•
•
•
•
• High performance Cree LED
• 80 Lumens with 7 hour run
time
• Adjustable spot to flood
beam
• Multi-use: headlight,
magnet, hat clip, helmet
• Includes 2 headstraps: cloth for wearing on head,
180 Lumens (high), 75 Lumens (low)
22 hour run time (high), 60 hrs (low)
Super bright, high performance Cree XRE LED
Rubber comfort grip handle
Anodized aluminum body
Runs on 3C batteries
MFG.#
DESCRIPTION
SE4W3C
Sportsman XTREME 4 Watt
3C Flashlight
UOM
ea
rubber grip for helmet
• Impact resistant to 7 ft.
• Runs on 3AAA batteries, included
20
MFG.#
DESCRIPTION
RNHL3AAA-B
Multi-Use 80 Lumen Headlight
UOM
ea
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
BATTERIES & LADDERS
UltraPRO Alkaline Batteries
• USA made, mercury free
• Ideal for your contract or bid business
• Traditional multi-pack sizes are the fastest moving
of all products at many distributor locations
MFG.#
DESCRIPTION
AL-AAA
UltraPRO Alkaline AAA
UOM
EA
AL-AA
UltraPRO Alkaline AA
EA
AL-C
UltraPRO Alkaline C
EA
AL-D
UltraPRO Alkaline D
EA
AL-9V
UltraPRO Alkaline 9V
EA
Fiberglass Step Ladder
• ProTop full featured top including magnet, drill holster,
conduit groove, etc.
• Shox Bracing System - Absorbs Impact prevents
damage
• “Da Boot” over sized safety shoe
• Non-conductive fiberglass rails
• Type IA 300lb rated
Fiberglass
Extension Ladder
• Quick Latch Safety Feature - Positive
Rung Lock
• Swivel safety shoes with soft ground/
ice pick
• Non-conductive fiberglass rails
• Type IA 300lb rated
MFG.#
DESCRIPTION
UOM
FS1506
6 FT Fiberglass
EA
FS1508
8 FT Fiberglass
EA
MFG.#
DESCRIPTION
FS1510
10 FT Fiberglass
EA
FE3220
20 FT Fiberglass
EA
FS1512
12 FT Fiberglass
EA
FE3224
24 FT Fiberglass
EA
FE3228
28 FT Fiberglass
EA
UOM
2012 C.L.I.M.B. Academy
CLIMB

C – Choose – How to choose the right ladder

L – Look at your ladder – How to Inspect

I – Insure proper set-up, know the surrounding area as well

M – Move – Know how to move safely on the your ladder

B – Be an advocate for safe ladder use and climbing
English, Spanish, and French Versions Covering

Stages

Step and Extension Ladders

Rolling Warehouse Ladders,

Steel Scaffold
Major Focus

Dynamic

Interactive

Online
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
21
LOCKOUT/TAGOUT
Starter Lockout/Tagout Kit
Personal Padlock Pouch
• 1 - 120/277V clamp-on
• 2 - 1" Group lockout hasps
•
•
•
•
•
•
•
breaker lockout w/cleat
(103538)
1 - 480/600V clamp-on
breaker lockout w/cleat
(65397)
1 - Universal multi-pole
breaker lockout (103582)
2 - 1" Group lockout
hasps (65375)
2 - Heavy-duty lockout tags (65520) with nylon cable
ties
1 - Lockout belt pouch (51172)
1 - Belt pouch (51172)
2 - Keyed-alike safety padlocks
MFG.#
DESCRIPTION
105967
Starter Lockout/Tagout Kit
UOM
EA
• 1 - 120V snap-on breaker
•
•
MFG.#
DESCRIPTION
105969
Personal Padlock Pouch
MFG.#
DESCRIPTION
99296
Basic Lockout/Tagout Kit
•
•
UOM
EA
EA
• Safely lock out your
•
breaker lockout w/cleat
(65396)
1 - 480/600V clamp-on
breaker lockout w/cleat
(65397)
1 - Universal multi-pole
breaker lockout (66321)
1 - Oversized breaker
lockout (65329)
1 - Lockout belt pouch (51172)
UOM
480/600V Breaker Blocker Kit
•
lockout (65387)
• 1 - 120/277V clamp-on
•
tags w/nylon cable ties
(65520)
• 2 - Keyed-alike safety
padlocks (99552)
• 1 - Lockout belt pouch
(51172)
•
Basic Lockout/Tagout Kit
•
(65375)
• 2 - Heavy-duty lockout
oversized and irregularly
shaped switches with our
480-600v breaker blocker
Self-adhesive backed rails
are permanently installed into
electrical panels
2 - 4" Yellow mounting rails
(51264)
1 - 7.6" Red blocking bar
(90892)
1 - 7.6" Green blocking bar (90893)
3 - Alcohol wipes
MFG.#
DESCRIPTION
90891
480/600V Breaker Blocker Kit
UOM
EA
Oversized Breaker
Lockout
• For 480/600V switches up to
2-1/4" wide and 7/8" thick
• Durable polypropylene and glass
Standard Lockout/Tagout Kit
filled impact-modified nylon
• Applies in seconds with
• 2 - 120/277V clamp-on
•
•
•
•
•
•
•
22
thumbscrew mechanism so no
screwdriver is needed
breaker lockouts w/cleats
(65396)
2 - 480/600V clamp-on
breaker lockouts w/cleats
(65397)
2 - Universal multi-pole
breaker lockouts (66321)
3 - 1" Red lockout hasps
(65375)
3 - Heavy-duty lockout
tags (65520) w/nylon cable
ties
1 - Small lockout toolbox (105905)
1 - Toolbox (105905)
3 - Keyed-alike safety padlocks
MFG.#
DESCRIPTION
105964
Standard Lockout/Tagout Kit
MFG.#
DESCRIPTION
65329
Oversized Breaker Lockout
UOM
EA
UOM
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
LOCKOUT/TAGOUT
Clamp On Breaker
Lockout
Wall Switch Lockout
• Device may be used with most wall
• Designed for 120V breakers
mounted switches
that have holes in the switch
tongue
• Dual cavities accommodate
different size switch tongues
• For locks shackles up to 9/32"
in dia.
• Dimensions: 0.83"H x 0.35"W x 2.15"L
• Easy to install using existing screws
• Locks switch in “on or off” position
• Lock not included
MFG.#
DESCRIPTION
UOM
103538
120/277V Clamp On Breaker Lockout
(2 per pack)
EA
65397
480/600V Clamp On Breaker Lockout,
single-pole and internal trip multi-pole
EA
MFG.#
DESCRIPTION
103540
wall switch Lockout - 110V (2 per pack)
Universal Multi-Pole Breaker
Lockout
Electrical Plug
Lockout
• Single device works with
• Avoid electrical accidents by
most Multi-pole breakers that
employ a tie-bar
• Made of durable impactmodified nylon
• Use thumbscrew to clamp
lockout securely over tie bar,
then insert lock to prevent clamp from being loosened
MFG.#
DESCRIPTION
UOM
103582
Universal Multi-Pole Breaker Lockout
EA
Snap-On Breaker Lockout
UOM
EA
applying plug lockouts
• Made of rugged polypropylene
• Small 110V plug lockout: 2"H x 2"D x 3-1/2"W with
1/2" diameter hole for cable
• Large 220/500V plug lockout: 3-1/4"H x 3-1/4"D x 7"W
with 1" diameter cable hole
• Danger message is printed on device to alert workers
of lockout in progress
MFG.#
DESCRIPTION
103534
Electrical Plug Lockout - 110V
UOM
EA
65675
Electrical Plug Lockout - 220/500V
EA
• Designed for 120V breakers that
have holes in the switch tongue
• Dual cavities accommodate different
Brady Safety Padlock Red
size switch tongues
• For locks shackles up to 9/32" in dia.
• Dimensions: 0.83"H x 0.35"W x 2.15"L
MFG.#
65387
DESCRIPTION
Snap-On Breaker Lockout
• Insulated key chamber protects workers
• Superior temperature, chemical and
corrosion resistance
UOM
• Special 6-pin cylinder resists tampering
• Ships with 1 key and labels
EA
Steel Lockout Hasp
• Includes tamper proof interlocking tabs
to prevent unauthorized opening
• Case-hardened steel with rust proof
plating and bright red vinyl
• Maximum 3/8" shackle diameter
MFG.#
DESCRIPTION
105719
Steel Lockout Hasp with Tab 1.5"
EA
103537
Steel Lockout Hasp with Tab 1" (2 per pack)
EA
MFG.#
DESCRIPTION
UOM
103533
Safety Padlock Red, 1-3/4"H x 1-1/2"W x 4/5"D,
1-1/2", shackle clearance 1-1/2", dia. 1/4"
EA
143150
Compact, 1-2/5"H x 1-1/5"W x 5/8"D, Shackle
clearance: 1", dia. 1/5"
EA
UOM
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
23
LOCKOUT/TAGOUT
Brady Steel Padlock
•
•
•
•
•
•
•
Reinforced laminated steel withstands severe physical abuse
5-pin cylinder offers more unique key cuts, better tamper resistance
Shackle size: 3/4", shackle diameter: 17/64"
Lock body: 11/3"H x 16/19"W x 7/8"D
MFG.#
DESCRIPTION
Padlocks are available keyed different
99500
Brady Steel Padlock 3/4" Red
Custom keying and charting is available
Lock labels sold separately
99524
Brady Steel Padlock 2" Red
UOM
EA
EA
Arc Flash and Shock Label
• Agency Approval(s)/Compliance: Meets current NEC
labeling requirements
• *Header: Warning OSHA
• *Legend: WARNING ARC FLASH & SHOCK HAZARD Appropriate
personal protection equipment required
• *Size: 2"H x 4"W
• *Color: Black/Orange on White
• *Material Description: Vinyl
MFG.#
DESCRIPTION
UOM
121133
Arc Flash and Shock Label (Warning) (10 per pack)
EA
121079
Write on Arc Flash Label (Warning header) (5 per pack)
EA
DP-B8375 5.5" x 3" Black/Red/White Lockout Tag
• Exceeds OSHA 50 lb. pull requirement for tagout devices
• 3/8" diameter rolled brass eyelet accepts most padlock shackles
MFG.#
DESCRIPTION
UOM
103541
DP-B8375 5.5" x 3" Black/Red/White Lockout Tag (5 per pack)
EA
Write on Arc Flash Label
(Danger header)
3.5" x 5" Arc Flash Warning Label
• *Header: Danger
• *Legend: DANGER Arc Flash & Shock Hazard
• Meet the current NEC labeling requirements
• Made of a polyester material with an overlaminate to
Appropriate PPE Required Flash Hazard
Category____..., etc.
• *Size: 5"H x 7" W
• *Color: Black/Red on White
• In accordance with NFPA 70E Standard
24
MFG.#
DESCRIPTION
121078
Write on Arc Flash Label (Danger header)
(5 per pack)
withstand harsh environments and industrial grade
adhesive
MFG.#
DESCRIPTION
101950
3.5" x 5" Arc Flash Warning Label (5 per pack)
UOM
EA
UOM
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
INSULATED hand TOOL kits
8-PIECE Basic Insulated Tool Kit
• D213-9NE-INS, D228-8-INS, D203-8N-INS, 601-6-INS,
602-4-INS, 603-4-INS, 63050-INS, 11045-INS
MFG.#
DESCRIPTION
33526
Basic Insulated Tool Kit
UOM
EA
13-PIECE Utility Insulated Tool Kit
• D2000-9NE-INS, D2000-28-INS, D2000-48-INS, D203-8-INS,
602-4-INS, 602-6-INS, 602-10-INS, 603-3-INS, 603-4-INS, 603-6-INS,
63050-INS, D502-10-INS, 1570-3LR-INS and custom case. MFG.#
DESCRIPTION
33525SC
Utility Insulated Tool Kit
UOM
EA
22-pIECE General-Purpose Insulated Tool Kit
• D2000-9NE-INS, D2000-28-INS, D2000-48-INS, D203-8N-INS,
D220-7-INS, D203-6-INS, D203-7-INS, 12098-INS, 63050-INS,
D502-10-INS, 11045-INS, 1005-INS, 1570-3LR-INS, 601-4-INS,
601-6-INS, 601-8-INS, 602-4-INS, 602-6-INS, 602-10-INS,
603-3-INS, 603-4-INS, 603-6-INS
MFG.#
DESCRIPTION
33527
General-Purpose Insulated Tool Kit
UOM
EA
* Klein insulated tools exceed IEC60900 &
ASTM F1505 standard for insulated tools
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
25
INSULATED hand TOOLS
Insulated Diag.-Cutting Pliers, Hi-Leverage, Angled Head, 8"
•
•
•
•
•
Clearly marked with the official 1000-volt rating symbol
Two layers of insulation provide protection against electric shock
Individually tested to exceed standards
Angled head for easier work in confined spaces
High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting
power than other plier designs
MFG.#
DESCRIPTION
D248-8-INS
Insulated Diag.-Cutting Pliers, Hi-Leverage, Angled Head, 8"
UOM
ea
Insulated Side-Cutting Pliers, Hi-Leverage NE, Crimip Die, 9-1/4"
•
•
•
•
Clearly marked with the official 1000-volt rating symbol
Two layers of insulation provide protection against electric shock
Individually tested to exceed standards
High-leverage design provides 46% greater cutting and gripping power than other plier
designs
• Streamlined design with sure-gripping, cross-hatched knurled jaws
MFG.#
DESCRIPTION
D213-9NE-INS
Insulated Side-Cutting Pliers, Hi-Leverage NE, Crimip Die, 9-1/4"
UOM
ea
Insulated Pump Pliers, 10"
• Clearly marked with the official 1000-volt rating symbol
• Two layers of insulation provide protection against electric shock
• Secure tongue and groove design for non-slip grip – even with heavy pressure
MFG.#
DESCRIPTION
D502-10-INS
Insulated Pump Pliers, 10"
UOM
ea
Insulated Long-Nose Pliers, Side Cutters, 7-1/8"
•
•
•
•
•
•
Clearly marked with the official 1000-volt rating symbol
Two layers of insulation provide protection against electric shock
Individually tested to exceed standards
Induction hardened, cutting knives for long life
Knurled jaws for sure wrapping and looping
Curved handles provide greater tool control
MFG.#
DESCRIPTION
D203-7-INS
Insulated Long-Nose Pliers, Side Cutters, 7-1/8"
UOM
ea
Insulated Cable Cutter
•
•
•
•
•
•
•
26
Clearly marked with the official 1000-volt rating symbol
Two layers of insulation provide protection against electric shock
Individually tested to exceed standards
Special, high-leverage design for exceptional cutting capability
Cable-gripping shear-type jaws
Precision, one-hand shearing action
Perfect for working in confined spaces
MFG.#
DESCRIPTION
63050-INS
Insulated Cable Cutter, High-Leverage
UOM
ea
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
• Design for 10-18 AWG Wire
• Clearly marked with the official
Screwdriver Set, 2-Pc. Insulated
Cushion-Grip
INSULATED hand TOOLS
Insulated Wire Stripper-Cutter
1000-volt rating symbol
• Two layers of insulation provide
protection against electric shock
Individually dielectrically tested
Gauges, cuts, strips, and loops wire
Spring-loaded for self-opening
Compact, lightweight wire-stripping,
cutting tool
• Narrow nose fits into tight places
• Do not use for cutting steel wire or bolts
• Hardened spring steel with precision-ground
stripping holes for easy removal of insulation
•
•
•
•
MFG.#
DESCRIPTION
11045-INS
Insulated Wire Stripper-Cutter, Flat
Design for 10-18 AWG Wire
• Clearly marked with the official 1000-volt rating symbol
• Two layers of insulation provide protection against
electric shock
• Individually tested to exceed standards
• Patented Tip-Ident® quickly identifies the type of
screwdriver and tip orientation
UOM
• Cushion-Grip handles for greater torque and comfort
• Includes one insulated keystone-tip screwdriver and
one insulated Phillips-tip screwdriver
ea
MFG.#
DESCRIPTION
33532-INS
Screwdriver Set, 2-Pc. Insulated
Cushion-Grip
UOM
ea
Insulated Screwdriver
Insulated Nut Driver
• Clearly marked with the official 1000-volt rating symbol
• Two layers of insulation provide protection against
electric shock
• Tips are precision ground to fit screw openings securely
and resist slippage
• Cushion-Grip handles for greater torque and comfort
• Patented Tip-Ident® quickly identifies the type of
screwdriver and tip orientation
MFG.#
DESCRIPTION
UOM
601-4-INS
4" Cushion-grip, Round-Shank Cabinet Tip
EA
601-6-INS
6" Cushion-grip, Round-Shank Cabinet Tip
EA
601-8-INS
8" Cushion-grip, Round-Shank Cabinet Tip
EA
602-4-INS
4" Cushion-grip, HD Round-Shank
Keystone
EA
602-6-INS
6" Cushion-grip, HD Round-Shank
Keystone
EA
602-10-INS
10" Cushion-grip, HD Round-Shank
Keystone
EA
603-3-INS
3" Cushion-grip, Round-Shank Phillips, #1
EA
603-4-INS
4" Cushion-grip, Round-Shank Phillips, #1
EA
• Clearly marked with the official 1000-volt rating symbol
• Two layers of insulation provide protection against
•
•
•
•
electric shock
Individually tested to exceed standards
Cushion-grip handle for greater torque and comfort
Patented Tip-Ident® quickly identifies nut driver and size
Full hollow shaft facilitates work on long bolt
applications
MFG.#
DESCRIPTION
646-1/2-INS
Cushion-Grip, 6" Hollow-Shaft, 1/2" Hex
UOM
EA
646-1/4-INS
Cushion-Grip, 6" Hollow-Shaft, 1/4" Hex
EA
646-3/8-INS
Cushion-Grip, 6" Hollow-Shaft, 3/8" Hex
EA
646-7/16-INS
Cushion-Grip, 6" Hollow-Shaft, 7/16" Hex
EA
* Klein insulated tools exceed IEC60900 &
ASTM F1505 standard for insulated tools
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
27
Arc Flash
NFPA 70E Faceshield
NFPA 70E Cotton Sock
•
•
•
•
•
•
• Exceeds NFPA 70E
• Cotton Sock Hood (ATPV=11cal)
• Grey - One Size
Exceeds NFPA 70E
High VLT (Visible Light Transmission)
Polycarbonate Construction
High Impact Protection
Scratch Resistant (longer product life)
Lightweight
MFG.#
DESCRIPTION
21CAT2-COS
Arc Flash Faceshield (ATPV=8)
w/Snap Pin Adjustable Hard Cap
MFG.#
DESCRIPTION
CAT11-BH-GR
NFPA 70E HRC2 Arc Flash FRT Cotton
Sock Hood (ATPV=11cal) - Grey - One
Size
UOM
EA
UOM
EA
Economy CLV M-CBW W-9 C-NB
• Arc Flash Coverall - Simple Arc Flash
•
•
•
•
•
•
•
•
•
Coverall Design
NFPA 70E & CSA Z462 Compliant
HRC2 (ATPV=8) Protection
9 oz FR Treated Cotton
Color: Navy Blue
Shorts (5'6" to 5'9") and talls
(6'1 to 6'4")
are also available
Hook-n-Loop Front Closure
Hook-n-Loop Button Cuff
Use with Oberon HRC2 Arc Flash
Faceshield & Rubber Gloves
Meets NFPA 70E, CSA Z462,
ASTM F1506
MFG.#
DESCRIPTION
UOM
CVE-CBW9NB-RM
CLV M-CBW W-9 C-NB, Size Medium
EA
CVE-CBW9NB-RL
CLV M-CBW W-9 C-NB, Size Large
EA
CVE-CBW9NB-RXL
CLV M-CBW W-9 C-NB, Size XLarge
EA
CVE-CBW9NB-R2X
CLV M-CBW W-9 C-NB, Size 2XLarge
EA
CVE-CBW9NB-R3X
CLV M-CBW W-9 C-NB, Size 3XLarge
EA
CVE-CBW9NB-R4X
CLV M-CBW W-9 C-NB, Size 4XLarge
EA
Economy Storage Bag For PPE
• Space to carry Arc Flash Suit with Hood or Contractor Kit
with Coverall & Faceshield
• Electrical Glove Kit and Electrical Tool Roll will fit as well
• Zipper Closure across top
• Two Carry Straps
28
MFG.#
DESCRIPTION
STORAGEBAG-NAVY
Economy Storage Bag For PPE
UOM
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
Arc Flash kits
NFPA 70E HRC2 Arc Flash Kit
•
•
•
•
•
•
•
•
NFPA 70E HRC2 (ATPV=8 cal) Arc Flash Navy Blue Coverall
Hard Cap with bracket
NFPA 70E HRC2 (ATPV=8 cal) Arc Flash Faceshield
Double Crown
Kit Storage Bag
Rubber Insulating Glove Kit sold separately
Some simple assembly required
Meets NFPA 70E, CSA Z462, ASTM F1506, ASTM F2178, ANSI Z87.1, ANSI Z89.1
MFG.#
DESCRIPTION
UOM
HRC2-CKE-NB-M
NFPA 70E HRC2 Arc Flash Kit, Size Medium
EA
HRC2-CKE-NB-L
NFPA 70E HRC2 Arc Flash Kit, Size Large
EA
HRC2-CKE-NB-XL
NFPA 70E HRC2 Arc Flash Kit, Size XLarge
EA
HRC2-CKE-NB-2XL
NFPA 70E HRC2 Arc Flash Kit, Size 2XLarge
EA
HRC2-CKE-NB-3XL
NFPA 70E HRC2 Arc Flash Kit, Size 3XLarge
EA
NFPA 70E HRC4 Arc Flash Kit
•
•
•
•
•
•
NFPA 70E HRC4 (ATPV=40 cal) Hood with E Rated Hard Cap
NFPA 70E HRC4 (ATPV=40 cal) Hip Length Coat with simple Velcro front closure
NFPA 70E HRC4 (ATPV=40 cal) Bib-Overalls with suspenders included
Kit Storage Bag sold separately
Rubber Insulating Glove Kit sold separately
You must conduct a hazard evaluation before the selection and use of any Arc Flash
PPE to determine what level of protection is appropriate for your task
• Meets NFPA 70E, CSA Z462, ASTM F1506, ASTM F2178, ANSI Z87.1, ANSI Z89.1
MFG.#
DESCRIPTION
UOM
FRTC4B-M
NFPA 70E HRC4 Arc Flash Kit, Size Medium
EA
FRTC4B-L
NFPA 70E HRC4 Arc Flash Kit, Size Large
EA
FRTC4B-XL
NFPA 70E HRC4 Arc Flash Kit, Size XLarge
EA
FRTC4B-2XL
NFPA 70E HRC4 Arc Flash Kit, Size 2XLarge
EA
FRTC4B-3XL
NFPA 70E HRC4 Arc Flash Kit, Size 3XLarge
EA
WWW.COOPER-ELECTRIC.COM x CONTACT YOUR LOCAL SALES REP
29
Cooper Electric Supply Co. Locations
NEW JERSEY
Augusta
17 Route 206 South, Unit 3
Augusta, NJ 07822
973-940-8905
NY
Bergenfield
72 N. Washington Avenue
Bergenfield, NJ 07621
201-385-7777
Bricktown
933 Cedarbridge Avenue
Bricktown, NJ 08723
732-920-3130
Egg Harbor Township
2727 Fire Road
Egg Harbor Township, NJ 08234
609-407-6090
Fairfield
444 Route 46
Fairfield, NJ 07004
973-227-3800
Flemington
19 Royal Road
Flemington, NJ 08822
908-782-3200
Freehold
3477 Route 9 North
Freehold, NJ 07728
732-462-2424
Fairview
217 Broad Avenue
Fairview, NJ 07022
201-945-5900
Jersey City
1521 Kennedy Boulevard
Jersey City, NJ 07035
201-434-8575
Linden
1805 Lower Road
Linden, NJ 07036
732-340-0800
PA
NJ
Manahawkin
317 East Bay Avenue
Manahawkin, NJ 08050
609-978-4666
Middletown
666 Route 35 South
Middletown, NJ 07748
732-671-5000
Morristown
168 Ridgedale Avenue
Morristown, NJ 07962
732-747-2233
Ocean Township
42 Cindy Lane
Ocean Township, NJ 07712
732-747-2233
NEW YORK
Elmsford
100 Grasslands Road
Elmsford, NY 10523
914-347-6300
Garden City Park
2200 Jericho Turnpike
Garden City Park, NY 11040
516-747-8800
Newburgh
38 South Plank Road
Newburgh, NY 12550
845-562-1575
PENNSYLVANIA
Phillipsburg
224 Stockton Street, Building D
Phillipsburg, NJ 08865
908-454-8500
Bethlehem
2198 Industrial Drive
Bethlehem, PA 18017
610-865-5501
Plainfield
412 West 2nd Street
Plainfield, NJ 07061
908-756-4090
Swarthmore
639 South Chester Road
Swarthmore, PA 19081
610-605-2300
West Berlin
403 Bloomfield Avenue
West Berlin, NJ 08091
856-719-1100
www.cooper-electric.com