WELDERS

SAWS & CORE DRILLS
REBAR CUTTERS
WHITEMAN® DUOSCREEDS
CORE DRILL MACHINES
Designed for versatility and high production cutting
115 V electro-hydraulic motor design
Cutting capacities up to 1-inch grade 60
Reversible blade design in lengths up to 16’
Ideal for wet-screed or form-to-form applications
Powered by a reliable Honda 4-stroke engine
REBAR BENDERS
Bends up to 1-inch diameter grade 60 rebar in seconds
115V electro mechanical design for high production
Complete set of rollers and collars is included
WHITEMAN® TRUSS SCREEDS
Rugged steel truss design for spans up to 65’
Available with engine or air power options
Variety of section lengths may be configured to your requirements
Flexible hand-held and rig type models
Multiple full line RIGS
Powerful drill motors
TILE SAWS
Precision cuts on ceramics and stone
Rugged steel frames design
Powerful electric motors
Equipment
Pocket
Guide
WELDERS
ENGINE POWERED WELDERS
Automatic fuel-bleed system (DLW, SDW)
DC Welder: 135 to 500 amps/AC output: 1.5 to 14kW
Simultaneous DC and AC operation on selected models
E-mode on selected models allows welding at idle-speed
P U M P S
FINISHING EQUIPMENT
W E L D E R S
REBAR EQUIPMENT
Honda backpack and 1-, 2- and 3-HP electric motors available
High-quality flexible shafts up to 21 feet in length
Steel-coated heads from 7/8" to 2-5/8" diameter
MIKASA® MGX-SERIES VIBRATORS
Economical lightweight design is ideal for footings and block fill
Steel heads range in size from 1.1” to 1.5”
Available with 4.5’- and 9.5’-length flexible shafts
Models available up to 52’ in length
Ideal for paving applications or flatwork
Hydraulic power pack features a 28-HP Vanguard diesel engine
MASONRY SAWS
Gasoline and electric motor models
14" and 20" capacity models
Industrial steel frame design
PORTABLE GENERATORS
WHITEMAN® POWER TROWELS
The industry leader with models ranging from 24” to 48”
Handles available with QuickPitch and standard pitch
control
Special electric models available for high-torque or highspeed applications
FLOOR SAWS
Gasoline and electric motor models
Push and self-propelled designs
Rugged steel frame design
Computer controlled vibrator adapts to concrete slump
Control boxes convert 120V, 60HZ input to 58V, 400Hz output
Head and shafts sizes available for virtually any application
Models available in 6’ and 8’ widths
High-performance gasoline and diesel engines for
long life
Heavy-duty gearboxes set the industry standard for
longevity
WHITEMAN
RIDE-ON TROWELS - HYDROSTATIC
DIAMOND BLADES & CORE BITS
Complete blade and bit selection
Laser weld technology
Guaranteed performance
MIKASA FXA-SERIES VIBRATORS
Motor-in-head design for best performance in low concrete slump
Head sizes available in 2” and 2-3/8” diameters
GDP5H high cycle generator powers up to three 2” heads
Models available in 8’ and 10’ widths
Hydrostatic drive eliminates gearboxes, clutches and belts
Patented hydraulic steering reduces operator fatigue
Sizes from 7 to 800kVA for portable and standby
applications
Designed for low-noise operation - surpasses OSHA
standards
Trailer mounted units and auxiliary fuel tanks
available
MQ POWER® ULTRA-SILENT
FIXED/PORTABLE GENERATORS
®
®
Sizes ranging from 2,500 to 9,700 watts
Idle control on GA 3.6, GA 6, and GA 9.7 models
Optional wheel kits available
MQ POWER WHISPERWATT®
FIXED/PORTABLE GENERATORS
WHITEMAN®
RIDE-ON TROWELS - MECHANICAL
MIKASA® MICON SERIES VIBRATORS
GENERATORS
SANDERS® PROFESSIONAL DIAMOND
TOOLS
Engineered for specific applications
Grooving and grinding heads
Professional diamond wire
Models from 25kVA to 125 kVA single/three phase
Ultra-silent design for critical low noise applications
Integrated fuel tank provides for 24-hour operation
at full load
C O N C R E T E
FLEXIBLE SHAFT VIBRATORS
WHITEMAN® ROLLER SCREEDS
C O M PA C T I O N
CONCRETE VIBRATORS
One-of-a-kind rechargeable DC battery welder
Lightweight and compact - just 129 pounds
Digital display panel
G E N E R ATO R S
BATTERY-POWERED WELDER
COMPACTION
MIKASA® RAMMERS
MIXERS
ENGINE-DRIVEN TRASH PUMPS
2", 3", 4", and 6" discharge models
Gasoline and diesel powered models
Capable of handling solids up to 3"
Gasoline powered
Built in hourmeter and tachometer
MTX series features low-vibration handle
Optional narrow trench shoes available
MIKASA® VIBRATORY PLATES
2" and 3" models with wheel kit included
Easy clean-out design
Powerful Honda engines
CONCRETE/MATERIAL PUMPS
& BUGGIES
VIBRATORY ROLLERS
RAMMAX® TRENCH ROLLERS
Articulating and skid-steer models available
Skid-steer design with up to 18,500 pounds
compaction force
Manual, infrared-remote or cable control
Interchangeable 24" and 33" drums
Powerful gasoline or diesel engines
One-piece forged, heat-treated crankshaft
Three-speed volume control allows operator
to control flow
2", 3", and 4" models
Ideal for clear water applications such as irrigation
or water trucks
High pressure models with heads up to 328'
Available with steel or polyethylene tubs
Batch capacities of 4, 6 and 9 cubic feet
Gasoline or electric power options
MIX-N-GO® MINI CONCRETE MIXERS
Available with steel or polyethylene tubs
Batch capacity of 3.0 cubic feet
Gasoline or electric power options
MAYCO® HYDRAULIC PUMPS
Four models with variable output from
0-60 yards3 per hour
Pumps aggregate up to 1½"
Ideal for refractory, shotcrete, footings and masonry
block fill
ESSICK® MINI-SPRAYERS
Ideal for fireproofing and simulated acoustics
Rotor-stator design with flows up to 3 gallons per minute
24 gallon hopper design
Models for clean water and trash applications
Single and three phase models
Discharge sizes range from 1 1/4" to 6" diameter
ENGINE-DRIVEN CENTRIFUGAL PUMPS
CONCRETE MIXERS
MAYCO® BALL-VALVE PUMPS
DEWATERING PUMPS
ELECTRIC SUBMERSIBLE PUMPS
Available with steel or polyethylene tubs
Batch capacities of 7, 9 and 12 cubic feet
Mixers offered with a choice of belt, hydraulic or
mechanical drive
GLOBUG® 4-SPOT LIGHT TOWERS
400-watt lamps may be positioned independently
3-stage mast extends to 13.8 feet (4.2m)
Ideal for job sites or industrial applications
Cart adapts to most small portable generators
DIAPHRAGM PUMPS
One-way and reversible models
Gasoline- and diesel-engine options
Water tanks available for selected models
Compas Compaction Analyzing System
Single- and dual-drum models
Gasoline- and diesel-engine options
Hydrostatic drive provides trouble-free operation
ROPS and seatbelts standard
WHITEMAN® & ESSICK®
PLASTER/MORTAR MIXERS
LIGHTING
GLOBUG® BALLOON LIGHTS
Easy maneuverability and transport
360-degree Glare-free lighting
Electronic ballast for easy starting
Ideal for job sites or industrial applications
400w-1000w models available
NIGHT HAWK® TOWABLE TOWERS
Dedicated and modular designs available
Rugged Light Fixtures
EPA compliant Engines
Trusted Power Generators
Top Quality Mast Assembly
Industrial Trailer
GLOBUG® DIFFUSER
360° Glare-Free Lighting
Two 1,000W Metal Halide Lamps
Ties Directly into Light Tower
220,000 Lumens
Easily Adapts to LT and MLT Towers
TRAILERS
HEAVY DUTY TRAILERS
H.D. welded steel frame construction
Powder coat paint process including frame, channel, actuator, & fenders
D.O.T. approved tail lamps, stop lamps, turn signal lamps, and side marker lamps
Surge hydraulic or electric-actuated drum brakes (all axles)
For more information or to request a product brochure
Call: 800-421-1244
International: 310-537-3700
WHITEMAN® POWER BUGGIES
Honda GX390 Engine
6-inch dump height easily clears most forms
16-cubic-foot polyethylene tube for easy clean out
Recoil or electric start
Connect with us on
© COPYRIGHT 2012, MULTIQUIP INC.
MULTIQUIP INC.
18910 WILMINGTON AVENUE
CARSON, CALIFORNIA 90746
FAX: 310-537-3927
E-MAIL: [email protected]
www.multiquip.com
REVISED 02-12