Electrical and HVAC Test Tools

Farwest Corrosion Control Company
Corrosion Control Products Company
www.farwestcorrosion.com
www.ccpco.com
Electrical and HVAC Test Tools
The New Fluke 330 Series Clamp Meters
New Fluke
Products!
• 330 Series
Clamp Meters
• 1520
MegOhmMeter
• 43B Power
Quality Analyzer
• 170 Series
Digital Multimeters
• 110 Series
Digital Multimeters
For Sales & Information, Call Toll Free: (888) 532-7937
Farwest Corrosion Control Company
Corrosion Control Products Company
www.farwestcorrosion.com
www.ccpco.com
Easy-to-use digital multimeters
that help you to get the job done
170 Series DMMs
“The Tough and Accurate Meters”
The new Fluke 170 Series offers both brains and
brawn. Packed with features, easy-to-use ergonomic
design, a new backlit display for better readability,
and a battery access door that leaves the calibration
seal intact. Plus, there’s a lifetime guarantee for all
three models.
Designed and
Conforms to
Designed and
Conforms to
IEC 1010-1
IEC 1010-1
600V
CAT IV
1000V
CAT III
Fluke 16 Multimeter
with Temperature
PENDING
Three tools in one: thermometer,
flame rod tester with microamp
function, and multimeter with
capacitance. Includes an 80BK
temperature module. Three-year
warranty.
Fluke 179
New features include temperature and a backlight.
Other features include:
• 1000 V range
• True-rms ac voltage and current
• Resistance
• Frequency, continuity and capacitance
• MIN/MAX/AVG
• Diode test
Designed and
Conforms to
IEC 1010-1
600V
CAT III
Fluke 177
Fluke 175
True-rms multimeter
with a backlight.
Other features include:
• 1000 V range
• True-rms ac voltage
and current
• Resistance
• Frequency, continuity
and capacitance
• MIN/MAX/AVG
• Diode test
Features include:
• 1000 V range
• True-rms ac voltage
and current
• Resistance
• Frequency, continuity
and capacitance
• MIN/MAX/AVG
• Diode test
110 Series DMMs
“The Compact Meters”
Sometimes smaller is better. The new Fluke 110
Series DMMs pack more features than some DMMs
twice their size. True-rms ac voltage and current
readings. 6000 count display. MIN/MAX/AVG.
Optional Fluke ToolPak™ meter hanging kit
available. The 110 Series includes three models:
110, 111, 112. Three-year warranty.
Designed and
Conforms to
IEC 1010-1
600V
CAT III
2
Fluke 87 Series III
True-rms Digital Multimeter
Features include 250µS peak
MIN/MAX for true peak transient
capture, 0.05% basic dc accuracy,
backlit display with larger digits,
a battery access door that leaves
the calibration seal intact, and
splash-proof, dust resistant case
with enhanced EMI shielding.
Lifetime warranty.
Designed and
Conforms to
Designed and
Conforms to
IEC 1010-1
IEC 1010-1
1000V
CAT III
600V
CAT IV
Ordering
Information
Fluke 110 Digital Multimeter
Fluke 111 Digital Multimeter
Fluke 112 Digital Multimeter
Fluke 175 Digital Multimeter
Fluke 177 Digital Multimeter
Fluke 179 Digital Multimeter
Fluke 16 Multimeter
Fluke 87-III Digital Multimeter
For Sales & Information, Call Toll Free: (888) 532-7937
Farwest Corrosion Control Company
Corrosion Control Products Company
www.farwestcorrosion.com
www.ccpco.com
330 Series Clamp Meters
The Fluke 330 Series gives clamp
meter a whole new meaning. Five
new models offer an impressive
array of innovative features with
current ranges up to 1000 A.
Choose the model that matches
the jobs you do.
• New! Large, backlit display (on
most models) is easy to see
• New! Auto shut-off maximizes
battery life so the meter works
when you need it
• In-rush current function (on
most models) for measuring
starting current for motors,
lighting, etc.
• Small body and jaws fit
perfectly in your hand and into
tight places
• Improved low current
measurement accuracy from
new microprocessor technology
• Meter controls are positioned so
current measurements can be
done with one hand
• Handy display hold keeps
measurements on the display
• Backed by Fluke technical
phone support, repair, parts
and calibration service
• Three-year warranty
Leading the way with innovative
features that fit the way you work.
Designed and
Conforms to
IEC 1010-1
600V
CAT III
Features
333
Backlight
Amps AC
400.0
334
335
336
•
•
•
•
600.0
600.0
600.0
999.9
600.0
999.9
Amps DC
TRMS
337
•
•
•
600.0
600.0
600.0
600.0
600.0
2%
2%
2%
2%
2%
Resistance
(Ohms)
600
600.0/6K
600.0/6K
600.0/6K
600.0/6K
Continuity
beeper
•
•
•
•
•
Volts
AC & DC
Basic
current
accuracy
400.0
Frequency
(Hz)
•
Min/Max
capture
•
Inrush
current
•
DC zero
button
Jaw size
Maximum
wire size
•
•
•
•
1.2”
1.2”
1.2”
1.2”
1.2”
750 MCM
750 MCM
750 MCM
750 MCM
750 MCM
Ordering
Information
Fluke 333
Fluke 334
Fluke 335
Fluke 336
Fluke 337
H3 Holster
H3 Holster
Rugged holster with built-in pocket and velcro
flap for test lead storage. Convenient belt loop
with snap. Recommended for the 330 Series
Clamp Meters.
For Sales & Information, Call Toll Free: (888) 532-7937
3
Farwest Corrosion Control Company
Corrosion Control Products Company
www.farwestcorrosion.com
www.ccpco.com
Power quality test tools
Fluke 43B Power Quality Analyzer
The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain
power systems, troubleshoot power problems and diagnose equipment failures. All in a
rugged handheld package.
• Combines capabilities of power quality analyzer,
multimeter and scope
• New! 20 measurement memories to save/recall
screens and data with cursor readings
New!
Calculates 3-phase power on balanced
•
loads, from a single-phase measurement
• Measure power consumption, harmonics, and
catch intermittents
New!
Toggle through the most commonly used
•
power quality modes with a single keystroke
• Monitoring functions help track intermittent
problems and power system performance
New!
FlukeView® software can log harmonics
•
and other readings over time
• New! FlukeView software provides complete
harmonics profile up to the 51st harmonic
• Three-year warranty
Fluke 41B
Power
Harmonics
Analyzer
Displays the harmonic
spectrum, waveform
and complete power data for
nonlinear waveforms. Saves up to
eight sets of measurement data.
Use the included FlukeView®
software to download data to your
PC for analysis and presentation.
Designed and
Conforms to
IEC 1010-1
600V
CAT III
Designed and
Conforms to
IEC 1010-1
600V
CAT III
VR101S Voltage Event
Recorder System
The VR101S records sags, swells,
transients, outages and frequency
variations on line voltage at
receptacles, where the most
sensitive loads are connected.
The VR101S is a starter system
that includes a compact VR101
event recorder, an optical
interface cable, and EventView™
software that turns your PC into a
power quality reporting tool.
Additional VR101 Event Recorders
can be purchased individually, so
you can monitor several locations
at once.
Ordering
Information
Designed and
Conforms to
Fluke 43B Power Quality Analyzer
Fluke 41B Power Harmonics Analyzer
VR101S Voltage Event Recorder System
VS101 Voltage Event Recorder
IEC 1010-1
600V
CAT III
4
For Sales & Information, Call Toll Free: (888) 532-7937
Farwest Corrosion Control Company
Corrosion Control Products Company
www.farwestcorrosion.com
www.ccpco.com
Electrical testers for basic measurements
Fluke T5-600
and T5-1000
Electrical tester for
continuity/ohms, ac amps
and 600 (model T5-600)
or 1000 (model T5-1000)
volts ac/dc. New Openjaw™
technology for up to 100
amps ac, with 0.1 amp
resolution. Optional holsters
available. Two-year
warranty.
Fluke VoltAlert™
Voltage Detectors
Pocket-sized, non-contact ac
voltage detectors glow red
when the tip is placed on an
outlet or conductor if voltage
is present. Available in two
voltage levels: the Fluke 1AC
for 90Vac to 600Vac, and the
1LAC for 24Vac to 90Vac.
Designed and
Conforms to
Designed and
Conforms to
IEC 1010-1
IEC 1010-1
600V
CAT III
1000V
CAT III
T3 Tester
H5 Holster
Belt loop holster designed
for carrying the T3 and T5
Electrical Testers.
Easy-to-use, economical, two-pole tester with 7-level LED
indicator for ac and dc voltage and continuity. Auto-on light
lets you know it’s working and automatically turns off after
eight minutes. Test leads and probes included. Optional
holster available. One year warranty.
Designed and
Conforms to
Designed and
Conforms to
Designed and
Conforms to
IEC 1010-1
IEC 1010-1
IEC 1010-1
600V
CAT III
1000V
CAT III
600V
CAT IV
Fluke 7-300 and 7-600
C520 Leather Tester Case
Oiled, top grain cowhide case
with large belt loop holds
Fluke T5 electrical testers.
Size (H x L x W) 100 mm x 200
mm x 125 mm (4" x 8" x 5").
For fast, accurate tests of
electrical power. Nothing
makes the job easier; automatic
readings of ac and dc voltage,
and ohms. Two-year warranty.
Designed and
Conforms to
IEC 1010-1
600V
CAT III
Ordering
Information
T5-1000
T5-600
T3
7-300
7-600
VoltAlert 1LAC
VoltAlert 1AC
H5 Holster
C520 Tester Case
For Sales & Information, Call Toll Free: (888) 532-7937
5
Farwest Corrosion Control Company
Corrosion Control Products Company
www.farwestcorrosion.com
www.ccpco.com
Accurate temperature
solutions to go
Fluke 65 Lasersighted Infrared
Thermometer
The Fluke 65 Infrared
Thermometer
provides quick noncontact temperature
measurement, with a
laser beam for easy
targeting. The large,
backlit display is
simple to read. Features a rugged
holster, MIN/MAX function, and
temperature memory.
Fluke 50S and 50D
Digital Thermometers
Fluke 50 Series II Digital Thermometers
Four models that provide laboratory accuracy in a
rugged, fast responding, handheld tool with:
• Large backlit dual display.
• MIN, MAX and AVG — with time references to
capture major events.
Electronic
offset function allowing user to
•
compensate for thermocouple errors.
• Support for a wide range of thermocouple types.
• Temperatures displayed in °F, °C, or Kelvin (K).
• Powerful data logging capabilities on the Fluke 53
and 54 allow the user to log up to 500 points of
data to internal memory. Recall function brings
logged data to the meter display for easy review.
• Splash and dust resistant case design, tested to
withstand one meter drop.
• Three-year warranty.
Reliable, Fluke-quality thermometers at our best value pricing.
The Fluke 50S is a basic,
single-input thermometer that
accepts
J or K-type thermocouples and
has a hold mode that freezes
display for convenient viewing.
The Fluke 50D is great for
measuring input/output changes
and differential trends. It has all
the features of the 50S plus:
• Dual channel with differential
output (T1-T2)
• MIN/MAX recording to capture
events
• Scan function continuously
scans through measurement
sequence (T1, T2, T2-T2)
Thermocouple types
Number of inputs
Time stamp
Rugged design with holster
Splash / dust resistant
Dual display with backlight
MIN/MAX/AVG record
Compatible with ToolPak
(T1 – T2) readout
Logging up to 500 points
IR port for download to PC
6
Range
-40 to 500 °C (-40 to 932 °F)
Response
Time
Less than 1 second
Resolution
0.1° up to 200°, 1° over 200°
Repeatability
± 1° or ± 1%,
whichever is greater
Accuracy
Above 0 °C (32 °F):
± 2 °C (± 4 °F)
Below 0 °C (32 °F):
± 5 °C (± 9 °F)
(With instrument stable
at 23 °C ± 3 °C)
Optical
resolution
8:1 Distance to Spot Size Ratio
Emissivity
Fixed at 0.95
Battery life
Approximately 4000
measurements (2 X AA)
80TK Thermocouple Module
Specifications
Features
Fluke 65 Specifications
54 Series II
53 Series II
52 Series II
51 Series II
K, J, T, E, R, S, N
K, J, T, E, R, S, N
K, J, T, E
K, J, T, E
K, J
K, J
Dual
Single
Dual
Single
Dual
Single
Time of Day
Time of Day
Relative Time
Relative Time
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50D
50S
Converts digital multimeters to a
thermometer, via standard banana
plugs. Uses K type thermocouples,
listed below.
Ordering
Information
•
51-2 Digital Thermometer, Single Input
52-2 Digital Thermometer, Dual Input
53-2 Datalogging Thermometer, Single Input
54-2 Datalogging Thermometer, Dual Input
FVF-SC1 FlukeView Forms Software
50S Digital Thermometer, Single Input
50D Digital Thermometer, Dual Input
65 Infrared Thermometer
80-TK Thermocouple Module
For Sales & Information, Call Toll Free: (888) 532-7937
Farwest Corrosion Control Company
Corrosion Control Products Company
www.farwestcorrosion.com
www.ccpco.com
Test leads, probes,
clips, holsters and cases
TL27 Heavy Duty Test Leads
Slim-Reach™ TP1 Test Probes
One red, one black detachable
probe, with flat blades to fit
snugly into blade type wall
sockets. CAT III, 1000 V, 10 A.
Rugged EPDM insulation, 1.5
meters (63") long with shrouded
straight connectors and excellent
strain reliefs on each end. CAT III,
1000 V, 10 A
AC86 Extra Large
Alligator Clips
TP38 Test Probes
Stainless steel probe insulated to
4 mm from end. CAT III, 1000 V,
10 A.
Insulated banana jack-style,
Aggressively curved jaw for
superior gripping. CAT III,
1000 V, 10 A
AC87 Heavy Duty
Bus Bar Clips
AC20 Industrial Test Clips
Spring-loaded alligator clips
with 20 mm (0.79") opening.
CAT III, 1000 V, 10 A.
Plunger style, safety grip
operation with insulated, right
angle jaws. Adjustable jaws open
to grip flat bus bars or round
conductors. CAT III, 1000 V, 10 A
C510 Leather Meter Case
Oiled, top grain cowhide case
with large belt loop holds most
Fluke DMMs, Thermometers and
Process Meters. Size (H x L x W)
100 mm x 275 mm x 175 mm
(4" x 11" x 7").
80i-400 AC Current Clamp
AC current clamp with safety
shrouded banana plugs for
multimeters. Measures ac current
from 1 A to 400 A. Output to
meter is 1 mA/A. Frequency
response: 48 Hz to 1000 Hz.
Maximum conductor size:
one 30 mm (1.18") or two each
25 mm (0.98").
i200 AC Current Clamp
i410 and i1010 AC/DC
Current Clamps
Low-cost current clamps for ac/dc
current measurements. Both models
provide superior noise immunity and
are supplied with heat resistant
cables with safety shrouded banana
plugs for multimeters. The Fluke i410
measures up to 400 A ac or dc, and
the i1010 measures up to 600 A ac
and 1000 A dc.
TL23F Electrical
Test Lead Set
One red, one
black siliconeinsulated
test leads,
AC20
Industrial
Test Clips,
Slim-Reach™
TP1 Test Probes,
designed to fit snugly into blade
type wall sockets.
AC current clamp with safety
shrouded banana plugs for
multimeters. Maximum current
240 A ac. Output to meter is
1 mA/A. Frequency response:
40 Hz to 10 kHz. Maximum
conductor size: 20 mm (0.79").
ToolPak Meter Hanging Kit
80PK-8 Pipe Clamp
Temperature Probe
Type-K thermocouple for fast
temperature and super heat
measurements of pipe surfaces.
Measurement range: -29 to 149 °C
(-20 to 300 °F) for pipe surfaces
from 6.4 mm to 34.9 mm.
Compatible with Fluke 180,
170, 110 Series, 70 Series III,
50 Series II, 724 and 725.
Includes magnet, two straps,
and two clips and 70 Series
adapter.
C550 Premium
Tool Bag
Rugged, weather resistant ballistic
cloth bag has steel reinforced
frame and 25 internal storage
pockets. Size (H x L x W) 325 mm x
500 mm x 225 mm (13" x 20" x 9").
For Sales & Information, Call Toll Free: (888) 532-7937
7
Farwest Corrosion Control Company
Corrosion Control Products Company
www.farwestcorrosion.com
www.ccpco.com
The new Fluke 1520 MegOhmMeter
So handy it takes a display this
big to show you all of the features.
•
•
•
•
•
•
•
•
•
•
•
•
•
Large, backlit LCD with analog bar graph and digital display
Three output voltages for insulation resistance testing:
250 V, 500 V, 1000 V
Insulation resistance testing up to 4000 MΩ; switches automatically to
voltage measurement when voltage is greater than 30 V ac or 30 V dc
AC/DC voltage measurement up to 600 V
Lo-Ohms function for testing connections
Last reading memory display
Four C-cell batteries for up to 5,000 tests per EN61557-2, with
battery-life indicator and auto shut-off
Autodischarge of capacitive voltage charges
Heavy duty TL27 test leads, AC86 alligator clips
and TP74 test probes
Rugged, splash-proof case with impact-absorbing
holster
Protective holster with hand strap
Carrying case with accessory storage
Three-year warranty
Designed and
Conforms to
IEC 1010-1
600V
CAT III
Specifications
Function
Insulation resistance
Auto ranges
Ordering
Information
Fluke 1520 MegOhmMeter
Accessories
TL27 Heavy Duty Test
Lead Set
SH100 Shoulder Strap
TPAK Strap and Magnet
Test voltages
Max measurement current
Audible/visible voltage warning
Lo-Ohms
Resistance
Analog bar graph
Audible/visible voltage warning
Resistance
Resistance
Analog bar graph
Voltage
Voltage
Range
Accuracy
Resolution
4.000 MΩ, 40.00 MΩ,
400.0 MΩ, 4000 MΩ
250 V, 500 V, 1000 V
1 mA
≥ 30 V ac or dc
To 100 MΩ: 2% + 2 counts
Over 100 MΩ: 10% + 2 counts +1%/GΩ
+20%, -0%
0.001 MΩ to 10 MΩ
O to 40.00 Ω
0 to 100 Ω
≥ 30 V ac or dc
2% + 2 counts
0.01 Ω
4kΩ
0 to 10 kΩ
2% + 2 counts
1Ω
0 to 600 V ac (50/60 Hz)
2% + 2 counts
1V
For Sales & Information, Call Toll Free: (888) 532-7937