www.mhscaster.com - Kaman Industrial Technologies

Transcription

www. mhs c a s te r. c om
MHS CASTER & MANUFACTURING CO.
There is no substitute for experience. MHS Caster & Manufacturing Co. brings years of design, engineering and
application experience to help solve your mobility needs.
WHEEL MATERIAL SELECTION GUIDE
Soft Rubber-SR
Page 13
Traditional composition hard core with soft
tread. Very quiet ride for modest cost.
• MHS makes it easy:
— Large selection of the most popular items.
MHS
• MHS makes it convenient with centrally located Distribution center.
Hard Rubber-HR
• MHS is committed to quality processes and cutting edge technology to help our customers drive cost out of the
This one piece wheel is made of a molded
hard rubber composition. Good load
ratings and resists flat spotting.
supply chain.
Page 13
Page 14
Thermoplastic rubber mechanically and
chemically bonded to a polyolefin core.
Tread is grey non-marking.
Mold-On Rubber-MR
Page 13
Traditional cushioned rubber tread
vulcanized to a cast iron core.
Quiet and floor protective.
• MHS products are available from selected distributors throughout North America.
Polyolefin-PB
Warranty: Seller warrants its products against defective material & workmanship for a period of ninety days from delivery. Seller’s liability under
this warranty shall be limited to the repair or replacement of any defective work or material, and Buyer agrees that Buyer’s sole and exclusive
remedy shall be such repair or replacement. Buyer agrees that no remedies (including but not limited to, incidental or consequential loss) shall
be available to Buyer. Seller makes no warranties, express or implied, concerning the products, including but not limited to, any warranty to
merchantability or fitness for a particular purpose, except as provided above.
INDEX
Injection molded polyolefin is
available in black or white color.
Offers good load capacity and water
resistance at a low cost.
Polyurethane
on Polyolefin-TPU
INDEX
Page 15
Wheel Material Selection Guide . . . . . . 2
REPLACEMENT WHEELS
CASTERS
Soft Rubber (SR) . . . . . . . . . . . . . . . . . . . . 13
Series 01/02 General Duty . . . . . . . . . . 3
Hard Rubber (HR) . . . . . . . . . . . . . . . . . . . 13
Series TL, G2, SPL/RPL & Light Duty . . . . . . 4
Mold-On Rubber (MR) . . . . . . . . . . . . . . . . 13
Page 15
Phenolic-PH
Specially blended, reinforced thermoplastic.
Excellent rollability and impact resistance.
Will not absorb water. Above average
chemical and solvent characteristics.
Single piece phenolic resin compound
molded with macerated canvas under
extreme pressure and heat.
Page 15
Polyolefin (PB) . . . . . . . . . . . . . . . . . . . . . 14
Series 1 Medium HeavyDuty . . . . . . . . . . . 7
Polyurethane On Polyolefin (PP) . . . . . . . . 15
Series 3 HeavyDuty . . . . . . . . . . . . . . . . . . 8
Reinforced Thermoplastic (RT) . . . . . . . . . . 15
Series 10 Heavy Duty . . . . . . . . . . . . . . . . . 9
Polyurethane/Iron Core (PI) . . . . . . . . . . . 15
Polyurethane/Severe Duty-PS
Solid Urethane (KT) . . . . . . . . . . . . . . . . . . 16
Series KP1 KingPin-Free Medium HeavyDuty10
Polyurethane/Severe Duty (PS) . . . . . . . . . 16
Composition polyurethane on iron core.
Highest capacities available in a floor
protective wheel.
Series KP7 KingPin-Free HeavyDuty . . . . . 11
Phenolic (PH) . . . . . . . . . . . . . . . . . . . . . . 17
Cast Iron (SS) . . . . . . . . . . . . . . . . . . . . . . 17
VISIT OUR WEB SITE FOR MORE INFORMATION AND WIDER SELECTION.
Poyurethane
on Iron Core-PI
Reinforced Thermoplastic-RT
Series TM, GO3 Light Medium Duty Stem . . 6
www.mhscaster.com
Page 16
This solid cast urethane wheel offers
quiet operation combined with high
load capacity and unequaled abrasion
and wear resistance.
3⁄8” to 1⁄2” thick polyurethane tread
is chemically bonded to a cast iron
core. Low rolling resistance and good
floor protection.
Thermoplastic Rubber On Polyolefin (SP) . . 14
Samples of Casters and Other Products . . . 18
Solid Urethane-KT
Injection molded polyurethane tread is
mechanically and chemically bonded to a
polyolefin core. Lighter than polyurethane
treads on steel or aluminum cores.
Series 03/04 Light Medium Duty . . . . . . . . . 5
V-grooved (VG) . . . . . . . . . . . . . . . . . . . . . 17
1
Page 14
Page 16
Page 17
Cast Iron-SS
Page 17
Sometimes called semi-steel because
of scrap steel content. Couples high
capacity with long service life.
W H E E L M AT E R I A L S E L E C T I O N G U I D E
— User friendly catalog and qualified sales assistance.
Thermoplastic Rubber
on Polyolefin -TPR
V-Grooved-VG
Page 17
Used on inverted angle iron for tracking
applications. Available in many sizes and
capacities.
2
MHS CASTER & MANUFACTURING CO.
There is no substitute for experience. MHS Caster & Manufacturing Co. brings years of design, engineering and
application experience to help solve your mobility needs.
WHEEL MATERIAL SELECTION GUIDE
Soft Rubber-SR
Page 13
Traditional composition hard core with soft
tread. Very quiet ride for modest cost.
• MHS makes it easy:
— Large selection of the most popular items.
MHS
• MHS makes it convenient with centrally located Distribution center.
Hard Rubber-HR
• MHS is committed to quality processes and cutting edge technology to help our customers drive cost out of the
This one piece wheel is made of a molded
hard rubber composition. Good load
ratings and resists flat spotting.
supply chain.
Page 13
Page 14
Thermoplastic rubber mechanically and
chemically bonded to a polyolefin core.
Tread is grey non-marking.
Mold-On Rubber-MR
Page 13
Traditional cushioned rubber tread
vulcanized to a cast iron core.
Quiet and floor protective.
• MHS products are available from selected distributors throughout North America.
Polyolefin-PB
Warranty: Seller warrants its products against defective material & workmanship for a period of ninety days from delivery. Seller’s liability under
this warranty shall be limited to the repair or replacement of any defective work or material, and Buyer agrees that Buyer’s sole and exclusive
remedy shall be such repair or replacement. Buyer agrees that no remedies (including but not limited to, incidental or consequential loss) shall
be available to Buyer. Seller makes no warranties, express or implied, concerning the products, including but not limited to, any warranty to
merchantability or fitness for a particular purpose, except as provided above.
INDEX
Injection molded polyolefin is
available in black or white color.
Offers good load capacity and water
resistance at a low cost.
Polyurethane
on Polyolefin-TPU
INDEX
Page 15
Wheel Material Selection Guide . . . . . . 2
REPLACEMENT WHEELS
CASTERS
Soft Rubber (SR) . . . . . . . . . . . . . . . . . . . . 13
Series 01/02 General Duty . . . . . . . . . . 3
Hard Rubber (HR) . . . . . . . . . . . . . . . . . . . 13
Series TL, G2, SPL/RPL & Light Duty . . . . . . 4
Mold-On Rubber (MR) . . . . . . . . . . . . . . . . 13
Page 15
Phenolic-PH
Specially blended, reinforced thermoplastic.
Excellent rollability and impact resistance.
Will not absorb water. Above average
chemical and solvent characteristics.
Single piece phenolic resin compound
molded with macerated canvas under
extreme pressure and heat.
Page 15
Polyolefin (PB) . . . . . . . . . . . . . . . . . . . . . 14
Series 1 Medium HeavyDuty . . . . . . . . . . . 7
Polyurethane On Polyolefin (PP) . . . . . . . . 15
Series 3 HeavyDuty . . . . . . . . . . . . . . . . . . 8
Reinforced Thermoplastic (RT) . . . . . . . . . . 15
Polyurethane/Iron Core (PI) . . . . . . . . . . . 15
Polyurethane/Severe Duty-PS
Solid Urethane (KT) . . . . . . . . . . . . . . . . . . 16
Series KP1 KingPin-Free Medium HeavyDuty10
Polyurethane/Severe Duty (PS) . . . . . . . . . 16
Composition polyurethane on iron core.
Highest capacities available in a floor
protective wheel.
Phenolic (PH) . . . . . . . . . . . . . . . . . . . . . . 17
Cast Iron (SS) . . . . . . . . . . . . . . . . . . . . . . 17
Poyurethane
on Iron Core-PI
Reinforced Thermoplastic-RT
Series TM, GO3 Light Medium Duty Stem . . 6
www.mhscaster.com
Page 16
This solid cast urethane wheel offers
quiet operation combined with high
load capacity and unequaled abrasion
and wear resistance.
3⁄8” to 1⁄2” thick polyurethane tread
is chemically bonded to a cast iron
core. Low rolling resistance and good
floor protection.
Thermoplastic Rubber On Polyolefin (SP) . . 14
Samples of Casters and Other Products . . . 18
Solid Urethane-KT
Injection molded polyurethane tread is
mechanically and chemically bonded to a
polyolefin core. Lighter than polyurethane
treads on steel or aluminum cores.
Series 03/04 Light Medium Duty . . . . . . . . . 5
V-grooved (VG) . . . . . . . . . . . . . . . . . . . . . 17
1
Page 14
Page 16
Page 17
Cast Iron-SS
Page 17
Sometimes called semi-steel because
of scrap steel content. Couples high
capacity with long service life.
W H E E L M AT E R I A L S E L E C T I O N G U I D E
— User friendly catalog and qualified sales assistance.
Thermoplastic Rubber
on Polyolefin -TPR
V-Grooved-VG
Page 17
Used on inverted angle iron for tracking
applications. Available in many sizes and
capacities.
2
SERIES 01/02 GENERAL DUTY
SERIES TL, G2, SPL/RPL & LIGHT DUTY
Capacities to 230 lbs.
G2
TL
APPLICATIONS:
SPL
APPLICATIONS:
RPL
These series offer a
broad selection of wheel
materials suitable for
the hospital, office, and
institutional environment.
S E R I E S 01/ 0 2 G E N E R A L D U T Y
Standard Features
• Swivel Casters - Horn and bearing raceway are
formed from a single piece of heavy gauge steel,
deeply corrugated to withstand stress and prevent
distortion under full rated load
Standard Features
• King Pin - Riveted and coined for durability in
rated service
G
E
Optional Features
Top Plate Dimensions & Hole Spacing
• Wheel Brake - (Suffix -WB)
Shown where available
01 SERIES SWIVEL
Wheel Top Plate Size
Size
DxE
DIA. Tread
“A” Width
Inches Inches
G
E
1
1 1/8
1 5/16
3
1 1/4
02 SERIES RIGID
Hole Spacing
FxG
Wheel
Size
Top Plate Size Hole Spacing
DxE
FxG
2”
1 7/8” x 2 9/16”
15/16” x 2 1/8”
2”
1 1/2” x 2 21/32”
15/16” x 2 1/8”
2 1/2”
2 3/4” x 3 13/16”
1 3/4” x 3”
2 1/2”
2 1/4” x 4 7/16”
1 1/16” x 3 1/2”
3”
3 1/8” x 4 1/8”
2 3/8” x 3 3/8” to 3 7/16”
3”
2 1/2” x 4 15/16”
1 3/16” x 4”
WHEEL SPECIFICATIONS
21/2
Threaded Stem
Selections
(TM)
F D
• Finish - Corrosion resistant zinc
2
02
01
• Load Bearing - Single row of hardened, polished
ball bearings roll freely in a large diameter,
lubricated raceway
WHEEL
F D
COMPOSITION
Sintered Iron
Soft Rubber
Soft Rubber
Hard Rubber
Hard Rubber
Polyolefin (Blk)
Sintered Iron
Soft Rubber
Hard Rubber
Polyolefin (Blk)
Sintered Iron
Soft Rubber
Soft Rubber
Hard Rubber
Hard Rubber
Polyolefin (Blk)
CASTER SPECIFICATIONS
Overall
Approx.
Bearing Axle Load
Swivel Attach. Shipping Wt.
Height
Type
Dia. Capacity
Radius Bolt
“B”
Swivel iRigidi
Plain
110 lb.
.90 lb. .70 lb.
Self Lube
90 lb.
.50 lb. .40 lb.
Self Lube
90 lb.
.50 lb. .40 lb.
1/4
1
1/4
1 3/4
Self Lube
110 lb. 2 /2
.50 lb. .40 lb.
Self Lube
110 lb.
.50 lb. .40 lb.
Plain
150 lb.
.50 lb. .40 lb.
Plain
160 lb.
1.8 lb. 1.0 lb.
Self Lube 5
100 lb.
1.1 lb. .80 lb.
1/
5/16
/16
2 1/4
Self Lube
160 lb. 3 4
1.1 lb. .80 lb.
Plain
160 lb.
1.0 lb. .80 lb.
Plain
230 lb.
2.2 lb. 1.8 lb.
Self Lube
175 lb.
1.5 lb. 1.3 lb.
Self Lube
175 lb.
1.5 lb. 1.3 lb.
3/8
13
7
5/16
Self Lube
225 lb. 3 /16 2 /16
1.5 lb. 1.3 lb.
Self Lube
225 lb.
1.5 lb. 1.3 lb.
Plain
225 lb.
1.5 lb. 1.5 lb.
PART NUMBERS
SWIVEL
CASTER
01-SIP-2
01-SRP-2
01-SRP-2-WB*
01-HRP-2
01-HRP-2-WB*
01-PBP-2
01-SIP-25
01-SRP-25
01-HRP-25
01-PBP-25
01-SIP-3
01-SRP-3
01-SRP-3-WB*
01-HRP-3
01-HRP-3-WB*
01-PBP-3
RIGID
CASTER
02-SIP-2
02-SRP-2
—
02-HRP-2
—
02-PBP-2
02-SIP-25
02-SRP-25
02-HRP-25
02-PBP-25
02-SIP-3
02-SRP-3
—
02-HRP-3
—
02-PBP-3
Threaded Stem Size
Diameter & Length
5/16” dia.– 18nc x 1 1/2”
3/8” dia.– 16nc x 1 1/2”
1/2” dia.– 13nc x 1 1/2”
Stem
Suffix
-52
-32
-12
Standard Grip Ring (G2)
Stem Size
7/16”
dia. x 1 3/8”
• Exceeds I.C.M. Standards
• Load Bearing - Two full independent
rows of hardened and polished ball
bearings
• Case Hardened Stamped Steel
Construction
Standard Top Plate
[SPL/RPL]
Optional Feature
SERIES TL (THREADED STEM), G2 (GRIP RING) & SPL/RPL (PLATE)
DIA. Tread
“A” Width
Inches Inches
2
7/8
2 1/2
13/16
3
15/16
4
15/16
5
15/16
WHEEL
COMPOSITION
PART NO. STEM
Load
Approx. Threaded
Bearing Axle Load
Swivel
Stem
Height
Shipping
TL
Type Dia. Capacity
Radius
Suffix
“B”
Weight CASTER
Soft Rubber
Self Lube 1/4
Soft Rubber
Self Lube
1/4
Thermoplastic Rubber on Polyolefin Plain
Polyurethane on Polyolefin Core
Plain
Soft Rubber
Celcon
Polyolefin
Plain
5/16
Plain
Soft Rubber
Celcon
Polyolefin
Plain
5/16
Plain
Soft Rubber
Celcon
Polyolefin
Plain
5/16
Plain
75 lb.
80 lb.
100 lb.
100 lb.
90 lb.
110 lb.
100 lb.
100 lb.
115 lb.
140 lb.
125 lb.
125 lb.
125 lb.
150 lb.
135 lb.
135 lb.
2 17/32
1 5/8
3 1/32
2 1/4
2 1/2
2 3/4
4 11/16
3 5/16
5 23/32
3 15/16
0.5 lb.
0.5 lb.
0.5 lb.
0.5 lb.
.63 lb.
.63 lb.
.63 lb.
.63 lb.
1.18 lb.
1.18 lb.
1.18 lb.
1.18 lb.
1.68
lb.
SV-Stem
1.68 lb.
1.68 lb.
1.68 lb.
PART NO. PLATE
Grip Ring
G2
CASTER
SWIVEL
CASTER
RIGID
CASTER
TL-SRP-2– -52, -32 G2-SRP-2
TL-SRP-25–
G2-SRP-25
TL-SPP-25– -52,
G2-SPP-25
TL-PPP-25– -32
G2-PPP-25
TL-SRP-3–
G2-SRP-3
TL-PBP-3– -52,
G2-PBP-3
TL-SPP-3– -32
G2-SPP-3
TL-SRB-3–
G2-PPP-3
TL-SRP-4–
G2-SRP-4
TL-PBP-4–
G2-PBP-4
-12
TL-SPP-4–
G2-SPP-4
TL-PPP-4–
G2-PPP-4
TL-SRP-5–
G2-SRP-5
SERIES RL/RO3
TL-PBP-5–
G2-PBP-5
G2/GO3
-12
TL-SPP-5–
G2-SPP-5
TL-PPP-5–
G2-PPP-5
—
—
—
—
SPL-SRP-3
SPL-PBP-3
SPL-SPP-3
SPL-PPP-3
SPL-SRP-4
SPL-PBP-4
SPL-SPP-4
SPL-PPP-4
SPL-SRP-5
SPL-PBP-5
SPL-SPP-5
SPL-PPP-5
—
—
—
—
RPL-SRP-3
RPL-PBP-3
RPL-SPP-3
RPL-PPP-3
RPL-SRP-4
RPL-PBP-4
RPL-SPP-4
RPL-PPP-4
RPL-SRP-5
RPL-PBP-5
RPL-SPP-5
RPL-PPP-5
SERIES TL , G2, & SPL/ RPL LIGHT DUT Y
A popular series caster for moving dollies,
carts and general warehouse use.
Recommended where use is intermittent
and absent of extreme shock or impact.
*With Brake
3
4
SERIES 01/02 GENERAL DUTY
SERIES TL, G2, SPL/RPL & LIGHT DUTY
G2
TL
APPLICATIONS:
SPL
APPLICATIONS:
RPL
These series offer a
broad selection of wheel
materials suitable for
the hospital, office, and
institutional environment.
S E R I E S 01/ 0 2 G E N E R A L D U T Y
Standard Features
• Swivel Casters - Horn and bearing raceway are
formed from a single piece of heavy gauge steel,
deeply corrugated to withstand stress and prevent
distortion under full rated load
Standard Features
• King Pin - Riveted and coined for durability in
rated service
G
E
Optional Features
Shown where available
01 SERIES SWIVEL
Wheel Top Plate Size
Size
DxE
DIA. Tread
“A” Width
Inches Inches
G
E
1
1 1/8
1 5/16
3
1 1/4
02 SERIES RIGID
Hole Spacing
FxG
Wheel
Size
Top Plate Size Hole Spacing
DxE
FxG
2”
1 7/8” x 2 9/16”
15/16” x 2 1/8”
2”
1 1/2” x 2 21/32”
15/16” x 2 1/8”
2 1/2”
2 3/4” x 3 13/16”
1 3/4” x 3”
2 1/2”
2 1/4” x 4 7/16”
1 1/16” x 3 1/2”
3”
3 1/8” x 4 1/8”
2 3/8” x 3 3/8” to 3 7/16”
3”
2 1/2” x 4 15/16”
1 3/16” x 4”
21/2
Threaded Stem
Selections
(TM)
F D
2
02
01
• Load Bearing - Single row of hardened, polished
ball bearings roll freely in a large diameter,
lubricated raceway
WHEEL
F D
COMPOSITION
Sintered Iron
Soft Rubber
Soft Rubber
Hard Rubber
Hard Rubber
Polyolefin (Blk)
Sintered Iron
Soft Rubber
Hard Rubber
Polyolefin (Blk)
Sintered Iron
Soft Rubber
Soft Rubber
Hard Rubber
Hard Rubber
Polyolefin (Blk)
Overall
Approx.
Bearing Axle Load
Height
Type
Dia. Capacity
Radius Bolt
“B”
Swivel iRigidi
Plain
110 lb.
.90 lb. .70 lb.
Self Lube
90 lb.
.50 lb. .40 lb.
Self Lube
90 lb.
.50 lb. .40 lb.
1/4
1
1/4
1 3/4
Self Lube
110 lb. 2 /2
.50 lb. .40 lb.
Self Lube
110 lb.
.50 lb. .40 lb.
Plain
150 lb.
.50 lb. .40 lb.
Plain
160 lb.
1.8 lb. 1.0 lb.
Self Lube 5
100 lb.
1.1 lb. .80 lb.
1/
5/16
/16
2 1/4
Self Lube
160 lb. 3 4
1.1 lb. .80 lb.
Plain
160 lb.
1.0 lb. .80 lb.
Plain
230 lb.
2.2 lb. 1.8 lb.
Self Lube
175 lb.
1.5 lb. 1.3 lb.
Self Lube
175 lb.
1.5 lb. 1.3 lb.
3/8
13
7
5/16
Self Lube
225 lb. 3 /16 2 /16
1.5 lb. 1.3 lb.
Self Lube
225 lb.
1.5 lb. 1.3 lb.
Plain
225 lb.
1.5 lb. 1.5 lb.
PART NUMBERS
SWIVEL
CASTER
01-SIP-2
01-SRP-2
01-SRP-2-WB*
01-HRP-2
01-HRP-2-WB*
01-PBP-2
01-SIP-25
01-SRP-25
01-HRP-25
01-PBP-25
01-SIP-3
01-SRP-3
01-SRP-3-WB*
01-HRP-3
01-HRP-3-WB*
01-PBP-3
RIGID
CASTER
02-SIP-2
02-SRP-2
—
02-HRP-2
—
02-PBP-2
02-SIP-25
02-SRP-25
02-HRP-25
02-PBP-25
02-SIP-3
02-SRP-3
—
02-HRP-3
—
02-PBP-3
Threaded Stem Size
Diameter & Length
5/16” dia.– 18nc x 1 1/2”
3/8” dia.– 16nc x 1 1/2”
1/2” dia.– 13nc x 1 1/2”
Stem
Suffix
-52
-32
-12
Standard Grip Ring (G2)
Stem Size
7/16”
dia. x 1 3/8”
• Exceeds I.C.M. Standards
• Load Bearing - Two full independent
rows of hardened and polished ball
bearings
• Case Hardened Stamped Steel
Construction
Standard Top Plate
[SPL/RPL]
Optional Feature
SERIES TL (THREADED STEM), G2 (GRIP RING) & SPL/RPL (PLATE)
DIA. Tread
“A” Width
Inches Inches
2
7/8
2 1/2
13/16
3
15/16
4
15/16
5
15/16
WHEEL
COMPOSITION
PART NO. STEM
Load
Approx. Threaded
Bearing Axle Load
Swivel
Stem
Height
Shipping
TL
Type Dia. Capacity
Radius
Suffix
“B”
Weight CASTER
Soft Rubber
Self Lube 1/4
Soft Rubber
Self Lube
1/4
Plain
Soft Rubber
Celcon
Polyolefin
Plain
5/16
Plain
Soft Rubber
Celcon
Polyolefin
Plain
5/16
Plain
Soft Rubber
Celcon
Polyolefin
Plain
5/16
Plain
75 lb.
80 lb.
100 lb.
100 lb.
90 lb.
110 lb.
100 lb.
100 lb.
115 lb.
140 lb.
125 lb.
125 lb.
125 lb.
150 lb.
135 lb.
135 lb.
2 17/32
1 5/8
3 1/32
2 1/4
2 1/2
2 3/4
4 11/16
3 5/16
5 23/32
3 15/16
0.5 lb.
0.5 lb.
0.5 lb.
0.5 lb.
.63 lb.
.63 lb.
.63 lb.
.63 lb.
1.18 lb.
1.18 lb.
1.18 lb.
1.18 lb.
1.68
lb.
SV-Stem
1.68 lb.
1.68 lb.
1.68 lb.
PART NO. PLATE
Grip Ring
G2
CASTER
SWIVEL
CASTER
RIGID
CASTER
TL-SRP-2– -52, -32 G2-SRP-2
TL-SRP-25–
G2-SRP-25
TL-SPP-25– -52,
G2-SPP-25
TL-PPP-25– -32
G2-PPP-25
TL-SRP-3–
G2-SRP-3
TL-PBP-3– -52,
G2-PBP-3
TL-SPP-3– -32
G2-SPP-3
TL-SRB-3–
G2-PPP-3
TL-SRP-4–
G2-SRP-4
TL-PBP-4–
G2-PBP-4
-12
TL-SPP-4–
G2-SPP-4
TL-PPP-4–
G2-PPP-4
TL-SRP-5–
G2-SRP-5
SERIES RL/RO3
TL-PBP-5–
G2-PBP-5
G2/GO3
-12
TL-SPP-5–
G2-SPP-5
TL-PPP-5–
G2-PPP-5
—
—
—
—
SPL-SRP-3
SPL-PBP-3
SPL-SPP-3
SPL-PPP-3
SPL-SRP-4
SPL-PBP-4
SPL-SPP-4
SPL-PPP-4
SPL-SRP-5
SPL-PBP-5
SPL-SPP-5
SPL-PPP-5
—
—
—
—
RPL-SRP-3
RPL-PBP-3
RPL-SPP-3
RPL-PPP-3
RPL-SRP-4
RPL-PBP-4
RPL-SPP-4
RPL-PPP-4
RPL-SRP-5
RPL-PBP-5
RPL-SPP-5
RPL-PPP-5
SERIES TL , G2, & SPL/ RPL LIGHT DUT Y
A popular series caster for moving dollies,
carts and general warehouse use.
Recommended where use is intermittent
and absent of extreme shock or impact.
*With Brake
3
4
SERIES TM, GO3 LIGHT MEDIUM DUTY STEM
SERIES 03/04 LIGHT MEDIUM DUTY
Total Lock Optional
5
Locks Wheel & Swivel Simultaneously
• Swivel Casters - Heavy gauge steel top
plate is attached to a full drawn steel horn
with integral, hardened raceways
• Load Bearings - Two full, independent rows
of hardened, polished ball bearings roll freely
in large diameter, lubricated raceways
3
11/4
3 1/2
11/4
4
11/4
5
11/4
Sockets for GO3 Stem
Rigid Caster
Add prefix A or D to caster number. (3 1/2”, 4”, and 5” only)
Example: A03-SRP-35
2 1/2 11/4
• Total Lock Wheel Brake - (Suffix-TLB)
Available on 3 1/2”, 4” and 5“ diameters
Patented Reinforced Thermoplastic Design Unlike plastic or steel, sockets will not loosen or wear.
Optional Top Plates
WHEEL
COMPOSITION
Soft Rubber
Polyurethane on Polyolefin
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Solid Urethane
Thermoplastic Rubber on Polyolefin
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
PART NUMBERS
Overall
Approx.
Bearing Axle Load
Height
Type Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
SWIVEL
CASTER
Self Lube
Ball
Plain
Self Lube
Self Lube
Ball
Plain
Ball
Plain
Self Lube
Self Lube
Ball
Delrin
Ball
Delrin
Plain
Self Lube
Self Lube
Plain
Ball
Delrin
Ball
Delrin
Plain
Self Lube
Self Lube
Plain
Ball
Delrin
Ball
Delrin
Plain
03-SRP-25
03-PPB-25
03-PBP-25
03-SRP-3
03-HRP-3
03-PPB-3
03-KTP-3
03-SPB-3
03-PBP-3
03-SRP-35
03-HRP-35
03-PPB-35
03-PPD-35
03-SPB-35
03-SPD-35
03-PBP-35
03-SRP-4
03-HRP-4
03-KTP-4
03-PPB-4
03-PPD-4
03-SPB-4
03-SPD-4
03-PBP-4
03-SRP-5
03-HRP-5
03-KTP-5
03-PPB-5
03-PPD-5
03-SPB-5
03-SPD-5
03-PBP-5
5/16
3/ 8
3/ 8
3/ 8
3/8
100 lb.
200 lb.
200 lb.
175 lb.
270 lb.
250 lb.
290 lb.
170 lb.
270 lb.
200 lb.
275 lb.
250 lb.
250 lb.
200 lb.
200 lb.
270 lb.
200 lb.
275 lb.
275 lb.
250 lb.
250 lb.
200 lb.
200 lb.
275 lb.
200 lb.
275 lb.
300 lb.
275 lb.
275 lb.
225 lb.
225 lb.
275 lb.
3 5/16
4 1/8
2 3/8
2 3/4
5/16
5/16
4 11/16 2 29/32
5/16
5 1/8”
3 7/32
5/16
6 3/16
3 13/16
5/16
1.2 lb.
1.3 lb.
1.1 lb.
1.4 lb.
1.4 lb.
1.5 lb.
1.5 lb.
1.5 lb.
1.1 lb.
1.9 lb.
1.9 lb.
1.8 lb.
1.8 lb.
1.8 lb.
1.8 lb.
1.6 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.1 lb.
2.1 lb.
2.1 lb.
2.1 lb.
1.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.5 lb.
.90 lb.
1.0 lb.
.80 lb.
1.2 lb.
1.2 lb.
1.3 lb.
1.3 lb.
1.3 lb.
.90 lb.
1.5 lb.
1.5 lb.
1.4 lb.
1.4 lb.
1.4 lb.
1.4 lb.
1.2 lb.
1.8 lb.
1.8 lb.
1.8 lb.
1.7 lb.
1.7 lb.
1.7 lb.
1.7 lb.
1.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.1 lb.
Sockets for
Square Tubing
Sockets for
Round Tubing
D 03
D 04
A 03
A 04
DIA. Tread
“A” Width
Inches Inches
7/16” dia. x 1 3/8” Long
• Stainless Steel - Consult Factory
Swivel Caster
Optional Features
This versatile caster is
used on a variety of
institutional, food service,
and office equipment.
• Wheel Brake - (Suffix-WB)
Available on 3 1/2”, 4” & 5” swivel caster
• King Pin - Shanked, hardened king pin holds
raceways precisely in alignment
Standard Top Plates
APPLICATIONS:
Standard Grip Ring (GO3)
Stem Size
RIGID
CASTER
04-SRP-25
04-PPB-25
04-PBP-25
04-SRP-3
04-HRP-3
04-PPB-3
04-KTP-3
04-SPB-3
04-PBP-3
04-SRP-35
04-HRP-35
04-PPB-35
04-PPD-35
04-SPB-35
04-SPD-35
04-PBP-35
04-SRP-4
04-HRP-4
04-KTP-4
04-PPB-4
04-PPD-4
04-SPB-4
04-SPD-4
04-PBP-4
04-SRP-5
04-HRP-5
04-KTP-5
04-PPB-5
04-PPD-5
04-SPB-5
04-SPD-5
04-PBP-5
Socket #
Socket #
Inside Tube Dia.
RD1
RD2
RD3
RD9
RD4
RD5
RD6
RD7
.777
.872
.894
.902
1.072
1.120
1.310
1.495
SQ1
SQ2
SQ3
SQ4
SQ5
SQ6
SQ7
SQ8
SQ9
SQ10
Inside Tube Dia.
.620
.650
.870
.902
1.101
1.120
1.140
1.150
1.152
1.400
Threaded (TM)
Stem Size
1/2”
Optional Features
DIA. Tread
“A” Width
Inches Inches
3
1 1/ 4
3 1/2 1 1/4
4
1 1/ 4
5
1 1/ 4
dia.–13NC x 1 1/2” Long
WHEEL
COMPOSITION
Bearing
Type
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Self Lube
Self Lube
Plain
Ball
Plain
Self Lube
Self Lube
Ball
Delrin
Ball
Delrin
Self Lube
Self Lube
Plain
Ball
Delrin
Ball
Delrin
Plain
Self Lube
Self Lube
Plain
Ball
Delrin
Ball
Delrin
Plain
Overall
Approx.
Axle Load
Swivel
Height
Shipping
Dia. Capacity
Radius
“B”
Weight
3/ 8
3/ 8
3/ 8
3/ 8
175 lb.
270 lb.
270 lb.
200 lb.
270 lb.
200 lb.
275 lb.
200 lb.
200 lb.
275 lb.
275 lb.
200 lb.
275 lb.
275 lb.
200 lb.
200 lb.
250 lb.
250 lb.
275 lb.
240 lb.
290 lb.
290 lb.
225 lb.
225 lb.
275 lb.
275 lb.
290 lb.
3 13/16
2 3/4
4 3/4
3 3/16
5
3 7/16
6
3 15/16
1.3 lb.
1.3 lb.
1.3 lb.
1.3 lb.
1.3 lb.
1.9 lb.
1.9 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.1 lb.
2.1 lb.
2.1 lb.
2.1 lb.
1.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.5 lb.
PART NUMBERS
G03
CASTER
NO.
TM
CASTER
NO.
G03-SRP-3
G03-HRP-3
G03-KTP-3
G03-SPB-3
G03-PBP-3
GO3-SRP-35
G03-HRP-35
G03-SPB-35
G03-SPD-35
G03-PPB-35
G03-PPD-35
G03-SRP-4
G03-HRP-4
G03-KTP-4
G03-SPB-4
G03-SPD-4
G03-PPB-4
G03-PPD-4
G03-PBP-4
G03-SRP-5
G03-HRP-5
G03-KTP-5
GO3-SPB-5
G03-SPD-5
G03-PPB-5
G03-PPD-5
G03-PBP-5
TM-SRP-3-12
TM-HRP-3-12
TM-KTP-3-12
TM-SPB-3-12
TM-PBP-3-12
TM-SRP-35-12
TM-HRP-35-12
TM-SPB-35-1
TM-SPD-35-12
TM-PPB-35-12
TM-PPD-35-12
TM-SRP-4-12
TM-HRP-4-12
TM-KTP-4-12
TM-SPB-4-12
TM-SPD-4-12
TM-PPB-4-12
TM-PPD-4-12
TM-PBP-4-12
TM-SRP-12
TM-HRP-5-12
TM-KTP-5-12
TM-SPB-5-12
TM-SPD-5-12
TM-PPB-5-12
TM-PPD-5-12
TM-PBP-5-12
SERIES TM & G03 LIGHT DUT Y STEM
S E R I E S 0 3 / 0 4 L I G H T M E D I U M D U T Y P L AT E
Standard Features
6
SERIES TM, GO3 LIGHT MEDIUM DUTY STEM
SERIES 03/04 LIGHT MEDIUM DUTY
Total Lock Optional
5
Locks Wheel & Swivel Simultaneously
• Swivel Casters - Heavy gauge steel top
plate is attached to a full drawn steel horn
with integral, hardened raceways
• Load Bearings - Two full, independent rows
of hardened, polished ball bearings roll freely
in large diameter, lubricated raceways
3
11/4
3 1/2
11/4
4
11/4
5
11/4
Sockets for GO3 Stem
Rigid Caster
Add prefix A or D to caster number. (3 1/2”, 4”, and 5” only)
Example: A03-SRP-35
2 1/2 11/4
• Total Lock Wheel Brake - (Suffix-TLB)
Available on 3 1/2”, 4” and 5“ diameters
Patented Reinforced Thermoplastic Design Unlike plastic or steel, sockets will not loosen or wear.
Optional Top Plates
WHEEL
COMPOSITION
Soft Rubber
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
PART NUMBERS
Overall
Approx.
Bearing Axle Load
Height
Type Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
SWIVEL
CASTER
Self Lube
Ball
Plain
Self Lube
Self Lube
Ball
Plain
Ball
Plain
Self Lube
Self Lube
Ball
Delrin
Ball
Delrin
Plain
Self Lube
Self Lube
Plain
Ball
Delrin
Ball
Delrin
Plain
Self Lube
Self Lube
Plain
Ball
Delrin
Ball
Delrin
Plain
03-SRP-25
03-PPB-25
03-PBP-25
03-SRP-3
03-HRP-3
03-PPB-3
03-KTP-3
03-SPB-3
03-PBP-3
03-SRP-35
03-HRP-35
03-PPB-35
03-PPD-35
03-SPB-35
03-SPD-35
03-PBP-35
03-SRP-4
03-HRP-4
03-KTP-4
03-PPB-4
03-PPD-4
03-SPB-4
03-SPD-4
03-PBP-4
03-SRP-5
03-HRP-5
03-KTP-5
03-PPB-5
03-PPD-5
03-SPB-5
03-SPD-5
03-PBP-5
5/16
3/ 8
3/ 8
3/ 8
3/8
100 lb.
200 lb.
200 lb.
175 lb.
270 lb.
250 lb.
290 lb.
170 lb.
270 lb.
200 lb.
275 lb.
250 lb.
250 lb.
200 lb.
200 lb.
270 lb.
200 lb.
275 lb.
275 lb.
250 lb.
250 lb.
200 lb.
200 lb.
275 lb.
200 lb.
275 lb.
300 lb.
275 lb.
275 lb.
225 lb.
225 lb.
275 lb.
3 5/16
4 1/8
2 3/8
2 3/4
5/16
5/16
4 11/16 2 29/32
5/16
5 1/8”
3 7/32
5/16
6 3/16
3 13/16
5/16
1.2 lb.
1.3 lb.
1.1 lb.
1.4 lb.
1.4 lb.
1.5 lb.
1.5 lb.
1.5 lb.
1.1 lb.
1.9 lb.
1.9 lb.
1.8 lb.
1.8 lb.
1.8 lb.
1.8 lb.
1.6 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.1 lb.
2.1 lb.
2.1 lb.
2.1 lb.
1.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.5 lb.
.90 lb.
1.0 lb.
.80 lb.
1.2 lb.
1.2 lb.
1.3 lb.
1.3 lb.
1.3 lb.
.90 lb.
1.5 lb.
1.5 lb.
1.4 lb.
1.4 lb.
1.4 lb.
1.4 lb.
1.2 lb.
1.8 lb.
1.8 lb.
1.8 lb.
1.7 lb.
1.7 lb.
1.7 lb.
1.7 lb.
1.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.5 lb.
2.1 lb.
Sockets for
Square Tubing
Sockets for
Round Tubing
D 03
D 04
A 03
A 04
DIA. Tread
“A” Width
Inches Inches
7/16” dia. x 1 3/8” Long
Swivel Caster
Optional Features
This versatile caster is
used on a variety of
institutional, food service,
and office equipment.
• Wheel Brake - (Suffix-WB)
Available on 3 1/2”, 4” & 5” swivel caster
• King Pin - Shanked, hardened king pin holds
raceways precisely in alignment
Standard Top Plates
APPLICATIONS:
Standard Grip Ring (GO3)
Stem Size
RIGID
CASTER
04-SRP-25
04-PPB-25
04-PBP-25
04-SRP-3
04-HRP-3
04-PPB-3
04-KTP-3
04-SPB-3
04-PBP-3
04-SRP-35
04-HRP-35
04-PPB-35
04-PPD-35
04-SPB-35
04-SPD-35
04-PBP-35
04-SRP-4
04-HRP-4
04-KTP-4
04-PPB-4
04-PPD-4
04-SPB-4
04-SPD-4
04-PBP-4
04-SRP-5
04-HRP-5
04-KTP-5
04-PPB-5
04-PPD-5
04-SPB-5
04-SPD-5
04-PBP-5
Socket #
Socket #
Inside Tube Dia.
RD1
RD2
RD3
RD9
RD4
RD5
RD6
RD7
.777
.872
.894
.902
1.072
1.120
1.310
1.495
SQ1
SQ2
SQ3
SQ4
SQ5
SQ6
SQ7
SQ8
SQ9
SQ10
Inside Tube Dia.
.620
.650
.870
.902
1.101
1.120
1.140
1.150
1.152
1.400
Threaded (TM)
Stem Size
1/2”
Optional Features
DIA. Tread
“A” Width
Inches Inches
3
1 1/ 4
3 1/2 1 1/4
4
1 1/ 4
5
1 1/ 4
dia.–13NC x 1 1/2” Long
WHEEL
COMPOSITION
Bearing
Type
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Soft Rubber
Hard Rubber
Solid Urethane
Polyolefin (Blk)
Self Lube
Self Lube
Plain
Ball
Plain
Self Lube
Self Lube
Ball
Delrin
Ball
Delrin
Self Lube
Self Lube
Plain
Ball
Delrin
Ball
Delrin
Plain
Self Lube
Self Lube
Plain
Ball
Delrin
Ball
Delrin
Plain
Overall
Approx.
Axle Load
Swivel
Height
Shipping
Dia. Capacity
Radius
“B”
Weight
3/ 8
3/ 8
3/ 8
3/ 8
175 lb.
270 lb.
270 lb.
200 lb.
270 lb.
200 lb.
275 lb.
200 lb.
200 lb.
275 lb.
275 lb.
200 lb.
275 lb.
275 lb.
200 lb.
200 lb.
250 lb.
250 lb.
275 lb.
240 lb.
290 lb.
290 lb.
225 lb.
225 lb.
275 lb.
275 lb.
290 lb.
3 13/16
2 3/4
4 3/4
3 3/16
5
3 7/16
6
3 15/16
1.3 lb.
1.3 lb.
1.3 lb.
1.3 lb.
1.3 lb.
1.9 lb.
1.9 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.2 lb.
2.1 lb.
2.1 lb.
2.1 lb.
2.1 lb.
1.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.9 lb.
2.5 lb.
PART NUMBERS
G03
CASTER
NO.
TM
CASTER
NO.
G03-SRP-3
G03-HRP-3
G03-KTP-3
G03-SPB-3
G03-PBP-3
GO3-SRP-35
G03-HRP-35
G03-SPB-35
G03-SPD-35
G03-PPB-35
G03-PPD-35
G03-SRP-4
G03-HRP-4
G03-KTP-4
G03-SPB-4
G03-SPD-4
G03-PPB-4
G03-PPD-4
G03-PBP-4
G03-SRP-5
G03-HRP-5
G03-KTP-5
GO3-SPB-5
G03-SPD-5
G03-PPB-5
G03-PPD-5
G03-PBP-5
TM-SRP-3-12
TM-HRP-3-12
TM-KTP-3-12
TM-SPB-3-12
TM-PBP-3-12
TM-SRP-35-12
TM-HRP-35-12
TM-SPB-35-1
TM-SPD-35-12
TM-PPB-35-12
TM-PPD-35-12
TM-SRP-4-12
TM-HRP-4-12
TM-KTP-4-12
TM-SPB-4-12
TM-SPD-4-12
TM-PPB-4-12
TM-PPD-4-12
TM-PBP-4-12
TM-SRP-12
TM-HRP-5-12
TM-KTP-5-12
TM-SPB-5-12
TM-SPD-5-12
TM-PPB-5-12
TM-PPD-5-12
TM-PBP-5-12
SERIES TM & G03 LIGHT DUT Y STEM
S E R I E S 0 3 / 0 4 L I G H T M E D I U M D U T Y P L AT E
Standard Features
6
SERIES 1 MEDIUM HEAVYDUTY
SERIES 3 HEAVY DUTY
S E R I E S 1 M E D I U M H E AV Y D U T Y
7
• Swivel Casters - Formed legs are continuously
welded, 1/4“ steel top plate is cold forged and heat
treated to relieve stress and add strength
• Main Load Bearing - Fully hardened ball bearings
in a hardened raceway
• Thrust Bearing - Large diameter hardened ball
bearings roll freely in a hardened raceway
• Lube Fittings - Provided for both
Standard
swivel and wheel bearings
• King Pin - Coined & stress relieved
• Top Plate - Extra-thick 5/16“ carbon steel, heat treated for
added strength and durability in severe service
• Yoke Base - Cold forged 1/4“ steel
• Wheel Bearings - Roller bearings are standard for
all wheel sizes
Top Plate
4
5
2
2
6
2
8
2
Cast Iron
Phenolic
Reinforced Thermoplastic
Mold-On Rubber
Polyurethane Cast Iron Core
Solid Urethane
Polyolefin (Blk)
V-Grooved
Cast Iron
Phenolic
Mold-On Rubber
Polyurethane on Cast Iron Core
Solid Urethane
Polyolefin (Blk)
V-Grooved
Cast Iron
Phenolic
Mold-On Rubber
Solid Urethane
Polyolefin (Blk)
V-Grooved
Cast Iron
Phenolic
Mold-On Rubber
Solid Urethane
Polyurethane Polyolefin Core
Polyolefin (Blk)
PART NUMBERS
Overall
Approx.
Bearing Axle Load
Height
Type Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
• Pressure Lubrication - Fittings are standard
for both swivel raceway and wheel bearings
Optional Features
• Delrin Bearing - (Change R to D) Example: S162D-PH
• 4 Position Swivel Lock - (Suffix -SL)
• Total Lock Brake - (Suffix -TLB)
WHEEL
COMPOSITION
• Large King Pin - An extra heavy 3/4“ hardened
king pin assembly aligns raceways perfectly
1/2
1/2
1/2
1/2
800 lb.
800 lb.
800 lb.
350 lb.
700 lb.
700 lb.
700 lb.
450 lb.
800 lb.
900 lb.
900 lb.
900 lb.
400 lb.
900 lb.
900 lb.
750 lb.
450 lb.
650 lb.
800 lb.
900 lb.
900 lb.
900 lb.
410 lb.
900 lb.
900 lb.
900 lb.
550 lb.
700 lb.
900 lb.
1050 lb.
900 lb.
500 lb.
900 lb.
1000 lb.
900 lb.
700 lb.
900 lb.
5 5/8
6 1/2
3 3/4
4 1/4
3/8
3/8
7 1/2
5
3/8
9 1/2
6 1/8
3/8
8.5 lb.
6.0 lb.
6.0 lb.
8.5 lb.
8.5 lb.
6.5 lb.
6.0 lb.
5.5 lb.
6.0 lb.
8.8 lb.
6.5 lb.
7.0 lb.
8.8 lb.
8.8 lb.
7.0 lb.
6.5 lb.
6.5 lb.
6.0 lb.
9.0 lb.
9.0 lb.
7.0 lb.
7.0 lb.
9.0 lb.
9.0 lb.
7.5 lb.
7.0 lb.
7.0 lb.
6.5 lb.
9.5 lb.
12.0 lb.
8.5 lb.
10.5 lb.
10.5 lb.
8.5 lb.
7.5 lb.
7.5 lb.
6.5 lb.
8.0 lb.
5.5 lb.
5.5 lb.
8.0 lb.
8.0 lb.
6.0 lb.
5.5 lb.
5.0 lb.
5.5 lb.
8.3 lb.
6.0 lb.
6.0 lb.
8.3 lb.
8.3 lb.
6.5 lb.
6.0 lb.
6.0 lb.
5.5 lb.
8.5 lb.
8.5 lb.
6.0 lb.
6.0 lb.
8.0 lb.
8.0 lb.
6.5 lb.
6.0 lb.
6.0 lb.
5.5 lb.
8.5 lb.
11.0 lb.
7.5 lb.
9.0 lb.
9.5 lb.
7.5 lb.
6.5 lb.
6.5 lb.
5.5 lb.
SWIVEL
CASTER
S142R-SS
S142R-PH
S142R-RT
S142R-MR
S142R-PI
S142R-KT
S142R-PP
S142R-PB
S142R-VG
S152R-SS
S152R-PH
S152R-RT
S152R-MR
S152R-PI
S152R-KT
S152R-PP
S152R-SP
S152R-PB
S152R-VG
S162R-SS
S162R-PH
S162R-RT
S162R-MR
S162R-PI
S162R-KT
S162R-PP
S162R-SP
S162R-PB
S162R-VG
S182R-SS
S182R-PH
S182R-MR
S182R-PI
S182R-KT
S182R-PP
S182R-SP
S182R-PB
• Swivel Bearing Raceways - Main load race
diameter is 3 1/4“ with fully hardened 7/16“ ball bearings.
Both upper and lower raceways are burnished to
resist wear; lower is also heat treated for added life
• Formed Swivel Legs - Cold forged from 1/4“ steel
for added strength, then welded to the yoke base
RIGID
CASTER
R142R-SS
R142R-PH
R142R-RT
R142R-MR
R142R-PI
R142R-KT
R142R-PP
R142R-PB
R142R-VG
R152R-SS
R152R-PH
R152R-RT
R152R-MR
R152R-PI
R152R-KT
R152R-PP
R152R-SP
R152R-PB
R152R-VG
R162R-SS
R162R-PH
R162R-RT
R162R-MR
R162R-PI
R162R-KT
R162R-PP
R162R-SP
R162R-PB
R162R-VG
R182R-SS
R182R-PH
R182R-MR
R182R-PI
R182R-KT
R182R-PP
R182R-SP
R182R-PB
4
2
5
2
6
2
8
2
Optional Features
• Wheel Brake Cam-Style - (Suffix -WB)
DIA. Tread
“A” Width
Inches Inches
Standard Top Plate
Overall
Approx.
Bearing Axle Load
Height
Type Dia. Capacity
Radius Bolt
“B”
Swivele Rigide
Cast Iron
Roller
800 lb.
8.5 lb. 8.0 lb.
Phenolic
Roller
800 lb.
6.0 lb. 5.5 lb.
Roller
800 lb.
6.5 lb. 5.5 lb.
Mold-On Rubber
Roller
350 lb.
8.5 lb. 8.0 lb.
1/2
5
1
1
/2
5 /8 3 /2
Roller
700 lb.
8.5 lb. 8.0 lb.
Solid Urethane
Roller
700 lb.
6.5 lb. 6.0 lb.
Roller
700 lb.
6.0 lb. 5.5 lb.
Polyolefin (Blk)
Roller
450 lb.
5.5 lb. 5.0 lb.
Cast Iron
Roller
1000 lb.
8.8 lb. 8.3 lb.
Phenolic
Roller
1000 lb.
6.5 lb. 6.0 lb.
Roller
1000 lb.
7.0 lb. 6.0 lb.
Mold-On Rubber
Roller
350 lb.
8.8 lb. 8.3 lb.
Roller
900 lb.
8.8 lb. 8.3 lb.
1/2
1/2
6 1/2 4 7/8
Solid Urethane
Roller
1000 lb.
7.0 lb. 6.5 lb.
Roller
750 lb.
6.5 lb. 6.0 lb.
Thermoplastic Rubber on Polyolefin Roller
450 lb.
6.5 lb. 6.0 lb.
Polyolefin (Blk)
Roller
650 lb.
6.0 lb. 5.5 lb.
Cast Iron
Roller
1200 lb.
9.2 lb. 8.2 lb.
Phenolic
Roller
1200 lb.
7.2 lb. 6.2 lb.
Roller
1200 lb.
7.5 lb. 6.5 lb.
Mold-on Rubber
Roller
500 lb.
9.2 lb. 8.2 lb.
1/2
1/2
Solid Urethane
Roller
1200 lb. 7 1/2 5 3/8
7.2 lb. 6.5 lb.
Roller
1200 lb.
7.2 lb. 6.2 lb.
550 lb.
7.2 lb. 6.2 lb.
Polyolefin (Blk)
Roller
700 lb.
6.7 lb. 5.7 lb.
Cast Iron
Roller
1400 lb.
14.0 lb. 12.0 lb.
Phenolic
Roller
1400 lb.
10.0 lb. 8.0 lb.
Roller
1400 lb.
8.5 lb. 7.5 lb.
Mold-on Rubber
Roller
600 lb.
14.0 lb. 12.0 lb.
Roller
1400 lb.
14.0 lb. 12.0 lb.
1/2
1/2
10 1/8 6 3/8
Solid Urethane
Roller
1200 lb.
11.0 lb. 9.0 lb.
Roller
1000 lb.
11.0 lb. 9.0 lb.
Thermoplastic Rubber on polyolefin Roller
700 lb.
11.0 lb. 9.0 lb.
Polyolefin (Blk)
Roller
900 lb.
10.0 lb. 3/8” lb.
WHEEL
COMPOSITION
PART NUMBERS
SWIVEL
CASTER
S342R-SS
S342R-PH
S342R-RT
S342R-MR
S342R-PI
S342R-KT
S342R-PP
S342R-PB
S352R-SS
S352R-PH
S352R-RT
S352R-MR
S352R-PI
S352R-KT
S352R-PP
S352R-SP
S352R-PB
S362R-SS
S362R-PH
S362R-RT
S362R-MR
S362R-KT
S362R-PP
S362R-SP
S362R-PB
S382R-SS
S382R-PH
S382R-RT
S382R-MR
S382R-PI
S382R-KT
S382R-PP
S382R-SP
S382R-PB
RIGID
CASTER
R342R-SS
R342R-PH
R342R-RT
R342R-MR
R342R-PI
R342R-KT
R342R-PP
R342R-PB
R352R-SS
R352R-PH
R352R-RT
R352R-MR
R352R-PI
R352R-KT
R352R-PP
R352R-SP
R352R-PB
R362R-SS
R362R-PH
R362R-RT
R362R-MR
R362R-KT
R362R-PP
R362R-SP
R362R-PB
R382R-SS
R382R-PH
R382R-RT
R382R-MR
R382R-PI
R382R-KT
R382R-PP
R382R-SP
R382R-PB
S E R I E S 3 H E AV Y D U T Y ( C O L D F O R G E D )
Standard Features
DIA. Tread
“A” Width
Inches Inches
Standard Features
8
SERIES 1 MEDIUM HEAVYDUTY
SERIES 3 HEAVY DUTY
S E R I E S 1 M E D I U M H E AV Y D U T Y
7
• Swivel Casters - Formed legs are continuously
welded, 1/4“ steel top plate is cold forged and heat
treated to relieve stress and add strength
• Main Load Bearing - Fully hardened ball bearings
in a hardened raceway
• Thrust Bearing - Large diameter hardened ball
bearings roll freely in a hardened raceway
• Lube Fittings - Provided for both
Standard
swivel and wheel bearings
• King Pin - Coined & stress relieved
• Top Plate - Extra-thick 5/16“ carbon steel, heat treated for
added strength and durability in severe service
• Yoke Base - Cold forged 1/4“ steel
• Wheel Bearings - Roller bearings are standard for
all wheel sizes
Top Plate
4
5
2
2
6
2
8
2
Cast Iron
Phenolic
Mold-On Rubber
Polyurethane Cast Iron Core
Solid Urethane
Polyolefin (Blk)
V-Grooved
Cast Iron
Phenolic
Mold-On Rubber
Solid Urethane
Polyolefin (Blk)
V-Grooved
Cast Iron
Phenolic
Mold-On Rubber
Solid Urethane
Polyolefin (Blk)
V-Grooved
Cast Iron
Phenolic
Mold-On Rubber
Solid Urethane
Polyurethane Polyolefin Core
Polyolefin (Blk)
PART NUMBERS
Overall
Approx.
Bearing Axle Load
Height
Type Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
• Pressure Lubrication - Fittings are standard
for both swivel raceway and wheel bearings
Optional Features
• Delrin Bearing - (Change R to D) Example: S162D-PH
• Total Lock Brake - (Suffix -TLB)
WHEEL
COMPOSITION
• Large King Pin - An extra heavy 3/4“ hardened
king pin assembly aligns raceways perfectly
1/2
1/2
1/2
1/2
800 lb.
800 lb.
800 lb.
350 lb.
700 lb.
700 lb.
700 lb.
450 lb.
800 lb.
900 lb.
900 lb.
900 lb.
400 lb.
900 lb.
900 lb.
750 lb.
450 lb.
650 lb.
800 lb.
900 lb.
900 lb.
900 lb.
410 lb.
900 lb.
900 lb.
900 lb.
550 lb.
700 lb.
900 lb.
1050 lb.
900 lb.
500 lb.
900 lb.
1000 lb.
900 lb.
700 lb.
900 lb.
5 5/8
6 1/2
3 3/4
4 1/4
3/8
3/8
7 1/2
5
3/8
9 1/2
6 1/8
3/8
8.5 lb.
6.0 lb.
6.0 lb.
8.5 lb.
8.5 lb.
6.5 lb.
6.0 lb.
5.5 lb.
6.0 lb.
8.8 lb.
6.5 lb.
7.0 lb.
8.8 lb.
8.8 lb.
7.0 lb.
6.5 lb.
6.5 lb.
6.0 lb.
9.0 lb.
9.0 lb.
7.0 lb.
7.0 lb.
9.0 lb.
9.0 lb.
7.5 lb.
7.0 lb.
7.0 lb.
6.5 lb.
9.5 lb.
12.0 lb.
8.5 lb.
10.5 lb.
10.5 lb.
8.5 lb.
7.5 lb.
7.5 lb.
6.5 lb.
8.0 lb.
5.5 lb.
5.5 lb.
8.0 lb.
8.0 lb.
6.0 lb.
5.5 lb.
5.0 lb.
5.5 lb.
8.3 lb.
6.0 lb.
6.0 lb.
8.3 lb.
8.3 lb.
6.5 lb.
6.0 lb.
6.0 lb.
5.5 lb.
8.5 lb.
8.5 lb.
6.0 lb.
6.0 lb.
8.0 lb.
8.0 lb.
6.5 lb.
6.0 lb.
6.0 lb.
5.5 lb.
8.5 lb.
11.0 lb.
7.5 lb.
9.0 lb.
9.5 lb.
7.5 lb.
6.5 lb.
6.5 lb.
5.5 lb.
SWIVEL
CASTER
S142R-SS
S142R-PH
S142R-RT
S142R-MR
S142R-PI
S142R-KT
S142R-PP
S142R-PB
S142R-VG
S152R-SS
S152R-PH
S152R-RT
S152R-MR
S152R-PI
S152R-KT
S152R-PP
S152R-SP
S152R-PB
S152R-VG
S162R-SS
S162R-PH
S162R-RT
S162R-MR
S162R-PI
S162R-KT
S162R-PP
S162R-SP
S162R-PB
S162R-VG
S182R-SS
S182R-PH
S182R-MR
S182R-PI
S182R-KT
S182R-PP
S182R-SP
S182R-PB
• Swivel Bearing Raceways - Main load race
diameter is 3 1/4“ with fully hardened 7/16“ ball bearings.
Both upper and lower raceways are burnished to
resist wear; lower is also heat treated for added life
• Formed Swivel Legs - Cold forged from 1/4“ steel
for added strength, then welded to the yoke base
RIGID
CASTER
R142R-SS
R142R-PH
R142R-RT
R142R-MR
R142R-PI
R142R-KT
R142R-PP
R142R-PB
R142R-VG
R152R-SS
R152R-PH
R152R-RT
R152R-MR
R152R-PI
R152R-KT
R152R-PP
R152R-SP
R152R-PB
R152R-VG
R162R-SS
R162R-PH
R162R-RT
R162R-MR
R162R-PI
R162R-KT
R162R-PP
R162R-SP
R162R-PB
R162R-VG
R182R-SS
R182R-PH
R182R-MR
R182R-PI
R182R-KT
R182R-PP
R182R-SP
R182R-PB
4
2
5
2
6
2
8
2
Optional Features
• Wheel Brake Cam-Style - (Suffix -WB)
DIA. Tread
“A” Width
Inches Inches
Standard Top Plate
Overall
Approx.
Bearing Axle Load
Height
Type Dia. Capacity
Radius Bolt
“B”
Swivele Rigide
Cast Iron
Roller
800 lb.
8.5 lb. 8.0 lb.
Phenolic
Roller
800 lb.
6.0 lb. 5.5 lb.
Roller
800 lb.
6.5 lb. 5.5 lb.
Mold-On Rubber
Roller
350 lb.
8.5 lb. 8.0 lb.
1/2
5
1
1
/2
5 /8 3 /2
Roller
700 lb.
8.5 lb. 8.0 lb.
Solid Urethane
Roller
700 lb.
6.5 lb. 6.0 lb.
Roller
700 lb.
6.0 lb. 5.5 lb.
Polyolefin (Blk)
Roller
450 lb.
5.5 lb. 5.0 lb.
Cast Iron
Roller
1000 lb.
8.8 lb. 8.3 lb.
Phenolic
Roller
1000 lb.
6.5 lb. 6.0 lb.
Roller
1000 lb.
7.0 lb. 6.0 lb.
Mold-On Rubber
Roller
350 lb.
8.8 lb. 8.3 lb.
Roller
900 lb.
8.8 lb. 8.3 lb.
1/2
1/2
6 1/2 4 7/8
Solid Urethane
Roller
1000 lb.
7.0 lb. 6.5 lb.
Roller
750 lb.
6.5 lb. 6.0 lb.
450 lb.
6.5 lb. 6.0 lb.
Polyolefin (Blk)
Roller
650 lb.
6.0 lb. 5.5 lb.
Cast Iron
Roller
1200 lb.
9.2 lb. 8.2 lb.
Phenolic
Roller
1200 lb.
7.2 lb. 6.2 lb.
Roller
1200 lb.
7.5 lb. 6.5 lb.
Mold-on Rubber
Roller
500 lb.
9.2 lb. 8.2 lb.
1/2
1/2
Solid Urethane
Roller
1200 lb. 7 1/2 5 3/8
7.2 lb. 6.5 lb.
Roller
1200 lb.
7.2 lb. 6.2 lb.
550 lb.
7.2 lb. 6.2 lb.
Polyolefin (Blk)
Roller
700 lb.
6.7 lb. 5.7 lb.
Cast Iron
Roller
1400 lb.
14.0 lb. 12.0 lb.
Phenolic
Roller
1400 lb.
10.0 lb. 8.0 lb.
Roller
1400 lb.
8.5 lb. 7.5 lb.
Mold-on Rubber
Roller
600 lb.
14.0 lb. 12.0 lb.
Roller
1400 lb.
14.0 lb. 12.0 lb.
1/2
1/2
10 1/8 6 3/8
Solid Urethane
Roller
1200 lb.
11.0 lb. 9.0 lb.
Roller
1000 lb.
11.0 lb. 9.0 lb.
Thermoplastic Rubber on polyolefin Roller
700 lb.
11.0 lb. 9.0 lb.
Polyolefin (Blk)
Roller
900 lb.
10.0 lb. 3/8” lb.
WHEEL
COMPOSITION
PART NUMBERS
SWIVEL
CASTER
S342R-SS
S342R-PH
S342R-RT
S342R-MR
S342R-PI
S342R-KT
S342R-PP
S342R-PB
S352R-SS
S352R-PH
S352R-RT
S352R-MR
S352R-PI
S352R-KT
S352R-PP
S352R-SP
S352R-PB
S362R-SS
S362R-PH
S362R-RT
S362R-MR
S362R-KT
S362R-PP
S362R-SP
S362R-PB
S382R-SS
S382R-PH
S382R-RT
S382R-MR
S382R-PI
S382R-KT
S382R-PP
S382R-SP
S382R-PB
RIGID
CASTER
R342R-SS
R342R-PH
R342R-RT
R342R-MR
R342R-PI
R342R-KT
R342R-PP
R342R-PB
R352R-SS
R352R-PH
R352R-RT
R352R-MR
R352R-PI
R352R-KT
R352R-PP
R352R-SP
R352R-PB
R362R-SS
R362R-PH
R362R-RT
R362R-MR
R362R-KT
R362R-PP
R362R-SP
R362R-PB
R382R-SS
R382R-PH
R382R-RT
R382R-MR
R382R-PI
R382R-KT
R382R-PP
R382R-SP
R382R-PB
S E R I E S 3 H E AV Y D U T Y ( C O L D F O R G E D )
Standard Features
DIA. Tread
“A” Width
Inches Inches
Standard Features
8
S E R I E S 11 H E AV Y D U T Y
9
SERIES KP1 KINGPIN-FREE MEDIUM HEAVY DUTY
Capacities to 1,400 lbs.
Standard Features
APPLICATIONS:
Standard Top Plate
• King Pin - 1” integrally forged, turned to 3/4” for
a slotted adjusting nut
Kingpin-Free Casters have rugged
one-piece forged steel top plate which
eliminates the two-piece weldment that
can separate, causing failure of the
competitive models. This caster was
designed for shock loading applications
and any area where a rugged, durable
caster is needed.
• Side Forks - 3/8” thick heavily embossed
• Top Plate/Yoke Base - Drop forged from SAE-1050 steel
• Axle - Specially ground 3/4” diameter, locked in position
with indexing lance in side fork
• Wheel Bearings - 3/4” I.D. tapered roller bearings in all wheels
• Heavy Duty 4 Position Swivel Lock (Suffix -4SL)
• Secure Face Contact Brake (Suffix -FCB)
DIA. Tread
“A” Width
Inches Inches
6
3
8
3
10
4
WHEEL
COMPOSITION
Bearing
Type
Grey Iron (Heavy Duty)
Mold-on Rubber
Severe Duty Polyurethane
Mold-on Rubber
Mold-on Rubber
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Standard Features
Optional Features
• Swivel Assembly - Precision machined, flame hardened
raceway for 3/8” diameter hardened steel ball bearings.
Tapered thrust bearing
PART NUMBERS
Overall
Approx.
Axle Load
Height
Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
3/4
3/4
3/4
3100 lb.
680 lb.
2000 lb.
3200 lb.
840 lb.
2500 lb.
3400 lb.
1000 lb.
2600 lb.
9 1/2
5 1/2
1/2
10 1/2
6 1/2
1/2
12 1/2
7 1/2
1/2
25.4 lb.
21.6 lb.
23.7 lb.
29.3 lb.
29.1 lb.
25.4 lb.
34.6 lb.
34.7 lb.
37.2 lb.
23.0 lb.
19.2 lb.
21.3 lb.
26.9 lb.
26.7 lb.
22.9 lb.
32.4 lb.
32.5 lb.
34.8 lb.
SWIVEL
CASTER
S1063T-GI
S1063T-MR
S1063T-PS
S1083T-GI
S1083T-MR
S1083T-PS
S10104T-GI
S10104T-MR
S10104T-PS
RIGID
CASTER
R1063T-GI
R1063T-MR
R1063T-PS
R1083T-GI
R1083T-MR
R1083T-PS
R10104T-GI
R10104T-MR
R10104T-PS
SERIES 11 HEAVY DUTY
Standard Top Plate
Standard Features
DIA. Tread
“A” Width
Inches Inches
6
3
8
3
10
4
WHEEL
COMPOSITION
Bearing
Type
Mold-on Rubber
Mold-on Rubber
Mold-on Rubber
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Optional Features
• Wheel Brake Cam Style (Suffix -WB)
• 4-Position Swivel Lock (Suffix -SL)
DIA. Tread
“A” Width
Inches Inches
4
2
5
2
6
2
8
2
• Heavy Duty 4 Position Swivel Lock (Suffix --4SL)
Overall
Approx.
Axle Load
Height
Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
3100 lb.
35.0 lb. 27.0 lb.
3/4
1/2
5 1/2
680 lb. 9 1/2
31.2 lb. 23.2 lb.
2000 lb.
33.7 lb. 25.3 lb.
3400 lb.
39.6 lb. 31.4 lb.
3/4
1/2
840 lb. 10 1/2
34.0 lb. 25.8 lb.
6 1/2
2500 lb.
35.7 lb. 27.4 lb.
4200 lb.
48.5 lb. 39.7 lb.
3/4
1/2
7 1/2
1400 lb. 12 1/2
50.9 lb. 42.2 lb.
4200 lb.
34.8 lb. 26.2 lb.
PART NUMBERS
SWIVEL
CASTER
S1163T-GI
S1163T-MR
S1163T-PS
S1183T-GI
S1183T-MR
S1183T-PS
S11104T-GI
S11104T-MR
S11104T-PS
RIGID
CASTER
R1163T-GI
R1163T-MR
R1163T-PS
R1183T-GI
R1183T-MR
R1183T-PS
R11104T-GI
R11104T-MR
R11104T-PS
Standard Top Plate
Optional Features
• King Pin - 1 1/4” integrally forged, turned to 1” diameter for
• Side Forks - 3/8” thick x 4” extra wide for maximum strength
• Axle - Specially ground 3/4” diameter, locked in position with
indexing lance in side fork
• Swivel Assembly - Precision machined, flame hardened raceway for
1/2” diameter hardened steel ball bearings. Tapered thrust bearing
• Top Plate - High strength alloy steel 1–piece forging
• Yoke Base - Precision machined and hardened for
extended life
• Swivel Assembly - 3/8” ball bearing mounted in a 2”
precision machined raceway hardened to 50 Rockwell C
• Legs - 1/4” steel formed to increase strength and welded
to yoke base
• Axle - 1/2” diameter
• Wheel bearings - straight roller bearing standard
• Finish Corrosion Resistant Zinc
WHEEL
COMPOSITION
Bearing
Type
Cast Iron
Phenolic
Mold-on Rubber
Polyurethane on Iron Core
Solid Urethane
Cast Iron
Phenolic
Mold-on Rubber
Solid Urethane
Cast Iron
Phenolic
Mold-on Rubber
Solid Urethane
Cast Iron
Phenolic
Mold-on Rubber
Solid Urethane
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Overall
Approx.
Axle
Load
Height
Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
800 lb.
8.5 lb. 7.5 lb.
800 lb.
6.0 lb. 5.0 lb.
1/ 2
3/8
350 lb. 5 5/8
8.5 lb. 7.5 lb.
3 3/16
700 lb.
8.5 lb. 7.5 lb.
700 lb.
6.5 lb. 5.5 lb.
1000 lb.
8.8 lb. 8.3 lb.
1000 lb.
6.5 lb.
60 lb.
1/2
3/8
3 7/8
400 lb. 6 1/2
8.8 lb. 8.3 lb.
900 lb.
8.8 lb. 8.3 lb.
900 lb.
7.0 lb. 6.5 lb.
1000 lb.
9.0 lb. 8.5 lb.
1200 lb.
7.0 lb. 6.0 lb.
1/2
3/8
410 lb. 7 1/2
9.0 lb. 8.0 lb.
4 9/16
1000 lb.
9.0 lb. 8.0 lb.
1000 lb.
7.5 lb. 6.5 lb.
1000 lb.
12.0 lb. 11.0 lb.
1400 lb.
8.5 lb. 7.5 lb.
1/ 2
3/8
6
500 lb. 9 1/2
10.5 lb. 9.0 lb.
1500 lb.
10.5 lb. 9.5 lb.
1000 lb.
8.5 lb. 7.5 lb.
PART NUMBES
SWIVEL
CASTER
SKP142R-SS
SKP142R-PH
SKP142R-MR
SKP142R-PI
SKP142R-KT
SKP152R-SS
SKP152R-PH
SKP152R-MR
SKP152R-PI
SKP152R-KT
SKP162R-SS
SKP162R-PH
SKP162R-MR
SKP162R-PI
SKP162R-KT
SKP182R-SS
SKP182R-PH
SKP182R-MR
SKP182R-PI
SKP182R-KT
RIGID
CASTER
RKP142R-SS
RKP142R-PH
RKP142R-MR
RKP142R-PI
RKP142R-KT
RKP152R-SS
RKP152R-PH
RKP152R-MR
RKP152R-PI
RKP152R-KT
RKP162R-SS
RKP162R-PH
RKP162R-MR
RKP162R-PI
RKP162R-KT
RKP182R-SS
RKP182R-PH
RKP182R-MR
RKP182R-PI
RKP182R-KT
S E R I E S K P1 K I N G P I N - F R E E M E D. H E AV Y D U T Y
10
9
SERIES KP1 KINGPIN-FREE MEDIUM HEAVY DUTY
Standard Features
APPLICATIONS:
Standard Top Plate
• King Pin - 1” integrally forged, turned to 3/4” for
Kingpin-Free Casters have rugged
one-piece forged steel top plate which
eliminates the two-piece weldment that
can separate, causing failure of the
competitive models. This caster was
designed for shock loading applications
and any area where a rugged, durable
caster is needed.
• Side Forks - 3/8” thick heavily embossed
• Axle - Specially ground 3/4” diameter, locked in position
with indexing lance in side fork
• Heavy Duty 4 Position Swivel Lock (Suffix -4SL)
DIA. Tread
“A” Width
Inches Inches
6
3
8
3
10
4
WHEEL
COMPOSITION
Bearing
Type
Mold-on Rubber
Mold-on Rubber
Mold-on Rubber
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Standard Features
Optional Features
• Swivel Assembly - Precision machined, flame hardened
raceway for 3/8” diameter hardened steel ball bearings.
Tapered thrust bearing
PART NUMBERS
Overall
Approx.
Axle Load
Height
Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
3/4
3/4
3/4
3100 lb.
680 lb.
2000 lb.
3200 lb.
840 lb.
2500 lb.
3400 lb.
1000 lb.
2600 lb.
9 1/2
5 1/2
1/2
10 1/2
6 1/2
1/2
12 1/2
7 1/2
1/2
25.4 lb.
21.6 lb.
23.7 lb.
29.3 lb.
29.1 lb.
25.4 lb.
34.6 lb.
34.7 lb.
37.2 lb.
23.0 lb.
19.2 lb.
21.3 lb.
26.9 lb.
26.7 lb.
22.9 lb.
32.4 lb.
32.5 lb.
34.8 lb.
SWIVEL
CASTER
S1063T-GI
S1063T-MR
S1063T-PS
S1083T-GI
S1083T-MR
S1083T-PS
S10104T-GI
S10104T-MR
S10104T-PS
RIGID
CASTER
R1063T-GI
R1063T-MR
R1063T-PS
R1083T-GI
R1083T-MR
R1083T-PS
R10104T-GI
R10104T-MR
R10104T-PS
Standard Top Plate
Standard Features
DIA. Tread
“A” Width
Inches Inches
6
3
8
3
10
4
WHEEL
COMPOSITION
Bearing
Type
Mold-on Rubber
Mold-on Rubber
Mold-on Rubber
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Tapered Roller
Optional Features
• Wheel Brake Cam Style (Suffix -WB)
• 4-Position Swivel Lock (Suffix -SL)
DIA. Tread
“A” Width
Inches Inches
4
2
5
2
6
2
8
2
• Heavy Duty 4 Position Swivel Lock (Suffix --4SL)
Overall
Approx.
Axle Load
Height
Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
3100 lb.
35.0 lb. 27.0 lb.
3/4
1/2
5 1/2
680 lb. 9 1/2
31.2 lb. 23.2 lb.
2000 lb.
33.7 lb. 25.3 lb.
3400 lb.
39.6 lb. 31.4 lb.
3/4
1/2
840 lb. 10 1/2
34.0 lb. 25.8 lb.
6 1/2
2500 lb.
35.7 lb. 27.4 lb.
4200 lb.
48.5 lb. 39.7 lb.
3/4
1/2
7 1/2
1400 lb. 12 1/2
50.9 lb. 42.2 lb.
4200 lb.
34.8 lb. 26.2 lb.
PART NUMBERS
SWIVEL
CASTER
S1163T-GI
S1163T-MR
S1163T-PS
S1183T-GI
S1183T-MR
S1183T-PS
S11104T-GI
S11104T-MR
S11104T-PS
RIGID
CASTER
R1163T-GI
R1163T-MR
R1163T-PS
R1183T-GI
R1183T-MR
R1183T-PS
R11104T-GI
R11104T-MR
R11104T-PS
Standard Top Plate
Optional Features
• King Pin - 1 1/4” integrally forged, turned to 1” diameter for
• Side Forks - 3/8” thick x 4” extra wide for maximum strength
• Axle - Specially ground 3/4” diameter, locked in position with
indexing lance in side fork
• Swivel Assembly - Precision machined, flame hardened raceway for
1/2” diameter hardened steel ball bearings. Tapered thrust bearing
• Top Plate - High strength alloy steel 1–piece forging
• Yoke Base - Precision machined and hardened for
extended life
• Swivel Assembly - 3/8” ball bearing mounted in a 2”
precision machined raceway hardened to 50 Rockwell C
• Legs - 1/4” steel formed to increase strength and welded
to yoke base
• Wheel bearings - straight roller bearing standard
• Finish Corrosion Resistant Zinc
WHEEL
COMPOSITION
Bearing
Type
Cast Iron
Phenolic
Mold-on Rubber
Solid Urethane
Cast Iron
Phenolic
Mold-on Rubber
Solid Urethane
Cast Iron
Phenolic
Mold-on Rubber
Solid Urethane
Cast Iron
Phenolic
Mold-on Rubber
Solid Urethane
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Overall
Approx.
Axle
Load
Height
Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
800 lb.
8.5 lb. 7.5 lb.
800 lb.
6.0 lb. 5.0 lb.
1/ 2
3/8
350 lb. 5 5/8
8.5 lb. 7.5 lb.
3 3/16
700 lb.
8.5 lb. 7.5 lb.
700 lb.
6.5 lb. 5.5 lb.
1000 lb.
8.8 lb. 8.3 lb.
1000 lb.
6.5 lb.
60 lb.
1/2
3/8
3 7/8
400 lb. 6 1/2
8.8 lb. 8.3 lb.
900 lb.
8.8 lb. 8.3 lb.
900 lb.
7.0 lb. 6.5 lb.
1000 lb.
9.0 lb. 8.5 lb.
1200 lb.
7.0 lb. 6.0 lb.
1/2
3/8
410 lb. 7 1/2
9.0 lb. 8.0 lb.
4 9/16
1000 lb.
9.0 lb. 8.0 lb.
1000 lb.
7.5 lb. 6.5 lb.
1000 lb.
12.0 lb. 11.0 lb.
1400 lb.
8.5 lb. 7.5 lb.
1/ 2
3/8
6
500 lb. 9 1/2
10.5 lb. 9.0 lb.
1500 lb.
10.5 lb. 9.5 lb.
1000 lb.
8.5 lb. 7.5 lb.
PART NUMBES
SWIVEL
CASTER
SKP142R-SS
SKP142R-PH
SKP142R-MR
SKP142R-PI
SKP142R-KT
SKP152R-SS
SKP152R-PH
SKP152R-MR
SKP152R-PI
SKP152R-KT
SKP162R-SS
SKP162R-PH
SKP162R-MR
SKP162R-PI
SKP162R-KT
SKP182R-SS
SKP182R-PH
SKP182R-MR
SKP182R-PI
SKP182R-KT
RIGID
CASTER
RKP142R-SS
RKP142R-PH
RKP142R-MR
RKP142R-PI
RKP142R-KT
RKP152R-SS
RKP152R-PH
RKP152R-MR
RKP152R-PI
RKP152R-KT
RKP162R-SS
RKP162R-PH
RKP162R-MR
RKP162R-PI
RKP162R-KT
RKP182R-SS
RKP182R-PH
RKP182R-MR
RKP182R-PI
RKP182R-KT
S E R I E S K P1 K I N G P I N - F R E E M E D. H E AV Y D U T Y
10
SERIES KP7 KINGPIN-FREE HEAVY DUTY
11
APPLICATIONS:
Constructed to withstand shock loads.
This uniquely manufactured product is
suitable for all heavy duty requirements.
Virtually all equipment where
capacities require a caster of
superior construction. In plant
operations will benefit from low
maintenance service for life.
Unlike similar designs, the onepiece top plate/yoke base adds
a measure of safety by
eliminating a weldment.
Standard Features
• Top Plate/Yoke Base - AISI-1045 Steel one piece forging
precision machined and through hardened
• Yoke Base - is pre-notched for field installable swivel lock
Standard Features
• Swivel Section - 1/2” ball bearing mounted in a
3” precision machined raceway
• Top Plate/Yoke Base - AISI-1045 Steel one
piece forging precision machined and hardened.
3/8” Top Plate Thickness
• Yoke Base - is pre-notched for field installable
swivel lock
• Swivel Assembly - 1/2” ball bearing mounted
in a 3” precision machined raceway
• Legs - 3/8” steel welded to base inside and out
• Legs - 3/8” steel welded to yoke base using
100,000 PSI weld filler, welded inside and out
Standard Top Plate
Standard Top Plate
Optional Features
• Bolt On Swivel Lock (Suffix-SL)
• Wheel Brake Options
Face Contact Brake (Suffix-FCB)
Thumb Screw Brake (Suffix-WB)
Optional Features
• Bolt On Swivel Lock (Suffix -SL)
Face Contact Brake (Suffix -FCB)
Thumb Screw Brake (Suffix -WB)
DIA. Tread
“A” Width
Inches Inches
6
3
8
3
10
3
12
3
WHEEL
COMPOSITION
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
PART NUMBER
Overall
Approx.
Bearing Axle Load
Height
Type Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
1/2
1/2
1/2
1/2
2000 lb.
2000 lb.
540 lb.
2000 lb.
2500 lb.
2500 lb.
670 lb.
2500 lb.
2500 lb.
2500 lb.
1000 lb.
2500 lb.
2500 lb.
3500 lb.
1140 lb.
3500 lb.
7 1/2
4 1/2
1/2
10 1/8
6 1/4
1/2
11 1/2
7 1/2
1/2
13 1/2
9
1/2
23.0 lb.
15.0 lb.
20.0 lb.
21.0 lb.
24.0 lb.
19.0 lb.
21.0 lb.
23.0 lb.
27.0 lb.
21.0 lb.
23.0 lb.
28.0 lb.
32.0 lb.
24.0 lb.
30.0 lb.
35.0 lb.
10.5 lb.
6.75 lb.
9.0 lb.
9.5 lb.
11.5 lb.
8.5 lb.
9.5 lb.
10.5 lb.
12.0 lb.
9.5 lb.
10.5 lb.
12.5 lb.
14.5 lb.
11.0 lb.
13.5 lb.
16.0 lb.
SWIVEL
CASTER
SKP763R-SS
SKP763R-PH
SKP763R-MR
SKP763R-PI
SKP783R-SS
SKP783R-PH
SKP783R-MR
SKP783R-PI
SKP7103R-SS
SKP7103R-PH
SKP7103R-MR
SKP7103R-PI
SKP7123R-SS
SKP7123R-PH
SKP7123R-MR
SKP7123R-PI
RIGID
CASTER
RKP763R-SS
RKP763R-PH
RKP763R-MR
RKP763R-PI
RKP783R-SS
RKP783R-PH
RKP783R-MR
RKP783R-PI
RKP7103R-SS
RKP7103R-PH
RKP7103R-MR
RKP7103R-PI
RKP7123R-SS
RKP7123R-PH
RKP7123R-MR
RKP7123R-PI
DIA. Tread
“A” Width
Inches Inches
6
3
8
3
10
3
12
3
WHEEL
COMPOSITION
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
PART NUMBERS
Overall
Approx.
Bearing Axle
Load
Swivel Attach.
Shipping Wt.
Height
Type
Dia. Capacity
Radius Bolt
“B”
Swivele Rigide
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
3/4
3/4
3/4
3/4
2000 lb.
2000 lb.
540 lb.
2000 lb.
2500 lb.
2500 lb.
670 lb.
2500 lb.
2500 lb.
2500 lb.
1000 lb.
2500 lb.
2500 lb.
3500 lb.
1140 lb.
3500 lb.
8
4 1/2
1/2
10 1/2
6 1/4
1/2
12 1/2
7 1/2
1/2
15 1/2
9
1/2
26.0 lb.
18.0 lb.
20.0 lb.
20.0 lb.
28.0 lb.
20.0 lb.
22.0 lb.
22.0 lb.
35.0 lb.
28.0 lb.
31.0 lb.
36.0 lb.
41.0 lb.
32.0 lb.
37.0 lb.
41.0 lb.
20.5 lb.
12.0 lb.
14.0 lb.
14.0 lb.
25.0 lb.
17.0 lb.
19.0 lb.
19.5 lb.
29.0 lb.
22.5 lb.
25.0 lb.
30.0 lb.
35.0 lb.
28.0 lb.
31.0 lb.
35.0 lb.
SWIVEL
CASTER
SKP863R-SS
SKP863R-PH
SKP863R-MR
SKP863R-PI
SKP883R-SS
SKP883R-PH
SKP883R-MR
SKP883R-PI
SKP8103R-SS
SKP8103R-PH
SKP8103R-MR
SKP8103R-PI
SKP8123R-SS
SKP8123R-PH
SKP8123R-MR
SKP8123R-PI
RIGID
CASTER
RKP863R-SS
RKP863R-PH
RKP863R-MR
RKP863R-PI
RKP883R-SS
RKP883R-PH
RKP883R-MR
RKP883R-PI
RKP8103R-SS
RKP8103R-PH
RKP8103R-MR
RKP8103R-PI
RKP8123R-SS
RKP8123R-PH
RKP8123R-MR
RKP8123R-PI
S E R I E S K P 8 K I N G P I N - F R E E H E AV Y D U T Y
APPLICATIONS:
12
11
APPLICATIONS:
Constructed to withstand shock loads.
This uniquely manufactured product is
suitable for all heavy duty requirements.
Virtually all equipment where
capacities require a caster of
superior construction. In plant
operations will benefit from low
maintenance service for life.
Unlike similar designs, the onepiece top plate/yoke base adds
a measure of safety by
eliminating a weldment.
Standard Features
• Top Plate/Yoke Base - AISI-1045 Steel one piece forging
precision machined and through hardened
• Yoke Base - is pre-notched for field installable swivel lock
Standard Features
• Swivel Section - 1/2” ball bearing mounted in a
3” precision machined raceway
• Top Plate/Yoke Base - AISI-1045 Steel one
piece forging precision machined and hardened.
3/8” Top Plate Thickness
• Yoke Base - is pre-notched for field installable
swivel lock
• Swivel Assembly - 1/2” ball bearing mounted
in a 3” precision machined raceway
• Legs - 3/8” steel welded to base inside and out
• Legs - 3/8” steel welded to yoke base using
100,000 PSI weld filler, welded inside and out
Standard Top Plate
Standard Top Plate
Optional Features
• Bolt On Swivel Lock (Suffix-SL)
Face Contact Brake (Suffix-FCB)
Thumb Screw Brake (Suffix-WB)
Optional Features
• Bolt On Swivel Lock (Suffix -SL)
Face Contact Brake (Suffix -FCB)
Thumb Screw Brake (Suffix -WB)
DIA. Tread
“A” Width
Inches Inches
6
3
8
3
10
3
12
3
WHEEL
COMPOSITION
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
PART NUMBER
Overall
Approx.
Bearing Axle Load
Height
Type Dia. Capacity
Radius Bolt
“B”
Swivel Rigid
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
1/2
1/2
1/2
1/2
2000 lb.
2000 lb.
540 lb.
2000 lb.
2500 lb.
2500 lb.
670 lb.
2500 lb.
2500 lb.
2500 lb.
1000 lb.
2500 lb.
2500 lb.
3500 lb.
1140 lb.
3500 lb.
7 1/2
4 1/2
1/2
10 1/8
6 1/4
1/2
11 1/2
7 1/2
1/2
13 1/2
9
1/2
23.0 lb.
15.0 lb.
20.0 lb.
21.0 lb.
24.0 lb.
19.0 lb.
21.0 lb.
23.0 lb.
27.0 lb.
21.0 lb.
23.0 lb.
28.0 lb.
32.0 lb.
24.0 lb.
30.0 lb.
35.0 lb.
10.5 lb.
6.75 lb.
9.0 lb.
9.5 lb.
11.5 lb.
8.5 lb.
9.5 lb.
10.5 lb.
12.0 lb.
9.5 lb.
10.5 lb.
12.5 lb.
14.5 lb.
11.0 lb.
13.5 lb.
16.0 lb.
SWIVEL
CASTER
SKP763R-SS
SKP763R-PH
SKP763R-MR
SKP763R-PI
SKP783R-SS
SKP783R-PH
SKP783R-MR
SKP783R-PI
SKP7103R-SS
SKP7103R-PH
SKP7103R-MR
SKP7103R-PI
SKP7123R-SS
SKP7123R-PH
SKP7123R-MR
SKP7123R-PI
RIGID
CASTER
RKP763R-SS
RKP763R-PH
RKP763R-MR
RKP763R-PI
RKP783R-SS
RKP783R-PH
RKP783R-MR
RKP783R-PI
RKP7103R-SS
RKP7103R-PH
RKP7103R-MR
RKP7103R-PI
RKP7123R-SS
RKP7123R-PH
RKP7123R-MR
RKP7123R-PI
DIA. Tread
“A” Width
Inches Inches
6
3
8
3
10
3
12
3
WHEEL
COMPOSITION
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
Cast Iron
Phenolic
Mold-on Rubber
PART NUMBERS
Overall
Approx.
Bearing Axle
Load
Swivel Attach.
Shipping Wt.
Height
Type
Dia. Capacity
Radius Bolt
“B”
Swivele Rigide
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Roller
3/4
3/4
3/4
3/4
2000 lb.
2000 lb.
540 lb.
2000 lb.
2500 lb.
2500 lb.
670 lb.
2500 lb.
2500 lb.
2500 lb.
1000 lb.
2500 lb.
2500 lb.
3500 lb.
1140 lb.
3500 lb.
8
4 1/2
1/2
10 1/2
6 1/4
1/2
12 1/2
7 1/2
1/2
15 1/2
9
1/2
26.0 lb.
18.0 lb.
20.0 lb.
20.0 lb.
28.0 lb.
20.0 lb.
22.0 lb.
22.0 lb.
35.0 lb.
28.0 lb.
31.0 lb.
36.0 lb.
41.0 lb.
32.0 lb.
37.0 lb.
41.0 lb.
20.5 lb.
12.0 lb.
14.0 lb.
14.0 lb.
25.0 lb.
17.0 lb.
19.0 lb.
19.5 lb.
29.0 lb.
22.5 lb.
25.0 lb.
30.0 lb.
35.0 lb.
28.0 lb.
31.0 lb.
35.0 lb.
SWIVEL
CASTER
SKP863R-SS
SKP863R-PH
SKP863R-MR
SKP863R-PI
SKP883R-SS
SKP883R-PH
SKP883R-MR
SKP883R-PI
SKP8103R-SS
SKP8103R-PH
SKP8103R-MR
SKP8103R-PI
SKP8123R-SS
SKP8123R-PH
SKP8123R-MR
SKP8123R-PI
RIGID
CASTER
RKP863R-SS
RKP863R-PH
RKP863R-MR
RKP863R-PI
RKP883R-SS
RKP883R-PH
RKP883R-MR
RKP883R-PI
RKP8103R-SS
RKP8103R-PH
RKP8103R-MR
RKP8103R-PI
RKP8123R-SS
RKP8123R-PH
RKP8123R-MR
RKP8123R-PI
APPLICATIONS:
12
SOFT RUBBER (SR)
APPLICATIONS:
Standard Features
Most popular in light, general, and light medium duty series.
DIA.
Inches
Face
Inches
Hub
Length
Load
Capacity
3
1 1/ 4
1 9/16
175 lb.
1/ 2
1 5/16
1 9/16
4
5
1 1/ 4
1 9/16
1 1/ 4
1 9/16
.4 lb.
SR35P-06 *
200 lb.
.4 lb.
SR414P-06 *
3/8
200 lb.
1.7 lb.
SR514P-06 *
3/8
200 lb.
3/8
Hard wheel offers low rolling resistance. Will not flat spot under static load.
Load
Capacity
3
1 1/4
1 9/16
270 lb.
1/ 2
1 5/16
1 9/16
4
5
1 1/4
1 9/1 6
1 1/4
1 9/16
3
170 lb.
1 9/16
1 1/4
5
• Composition - Hard rubber molded throughout
• Good Load Rating & Good Floor Protection
• Temperature Range of -40° to 158°F
Hub
Length
3
1
3 /2 1 1/4
1 9/16
4
Standard Features
Face
Inches
Hub
Length
Shipping
Weight
6
8
Load Shipping
Capacity Weight
Ball Bearing
Sizes
Part No.
Sizes
Part No.
.5 lb.
SP3B-06
3/8
—
—
SP3D-06
3/8
180 lb.
.3 lb.
SP35B-06
3/8
—
—
SP35D-06
3/8
1 9/16
200 lb.
.3 lb.
SP4B-06
3/8
—
—
SP4D-06
3/8
2
2 3/16
350 lb.
1.2 lb.
—
—
1/2, 5/8, 3/4
SP42D-12
1/2, 5/8, 3/4
1 1/4
1 9/16
225 lb.
1.0 lb.
SP5B-06
3/8
—
SP5D-06
3/8
2
2 9/16
450 lb.
1.6 lb.
—
—
SP52R-12
1/2, 5/8, 3/4
SP52D-12
1/2, 5/8, 3/4
2
2 3/16
550 lb.
1.7 lb.
—
—
SP62R-12
1/2, 5/8, 3/4
SP62D-12
1/2, 5/8, 3/4
2
2 3/16
700 lb.
2.5 lb.
—
—
SP82R-12
1/2, 5/8, 3/4
SP82D-12
1/2, 5/8, 3/4
Plain Bore or
Bore Less Roller Bearings
Part No.
HR314P-06 *
3/8
275 lb.
.4 lb.
HR3514P-06 *
3/8
275 lb.
.4 lb.
HR414P-06 *
3/8
300 lb.
1.0 lb.
HR514P-06 *
3/8
APPLICATIONS:
Warehouse environments where floor
protection and noise reduction are required.
—
POLYOLEFIN (PB)
APPLICATIONS:
Used in food processing environments.
White color allows identification of
contaminants during steam cleaning.
Material will not absorb water and is
unaffected by blood and animal fats.
Its low cost and load carrying capacity
make polyolefin a popular material for
general warehouse applications.
Standard Features
• Composition - Injection molded polyolefin
• Temperature Range Of -20° to 230°F
*Supplied with Delrin bushing designed to run directly on axle.
MOLD-ON RUBBER (MR)
SP42R-12
Sizes
Sizes
.25 lb.
Delrin Bearing
Roller Bearing
Part No.
1 1/4
Popular in general and light medium duty series.
DIA.
Face
Inches Inches
• Resistant To Water, Solvents, Grease, and
Mild Acids
Optional Features
• Floor Protective
• White Polyolefin - (Change prefix PB to PW)
• FDA Approved
Standard Features
• Composition - Cushioned rubber tread permanently vulcanized to cast iron cores
• Recommended For - Quiet movement with medium to heavy loads or where
cushioning load is required
• Temperature Range Of -30° to 160°F • Zerk Fitting In Hub
• Special Bore Sizes, Keyways, Set Screws
• Tread Hardness - 70 to 75 dur. shore A
DIA.
Inches
Face
Inches
Hub
Length
Load Shipping
Capacity Weight
4
5
6
8
2
2 3/16
350 lb.
2
2 3/16
2
2
Plain Bore or
Bore Less Roller Bearing
Roller Bearing
Part No.
Sizes
Part No.
Sizes
1.5 lb.
MR42-19
1 3/16
MR42R-12
1/2, 5/8, 3/4
400 lb.
2.0 lb.
MR52-19
1 3/16
MR52R-12
1/2, 5/8, 3/4
2 3/16
410 lb.
2.3 lb.
MR62-19
1 3/16
MR62R-12
1/2, 5/8, 3/4
2 3/16
500 lb.
7.0 lb.
MR82-19
1 3/16
MR82R-12
1/2, 5/8, 3/4
DIA. Face
Hub
Load Shipping
Inches Inches Length Capacity Weight
Plain Bore or
PW62D-12
Roller Bearing
Delrin Bearing
Part No.
Sizes
Part No.
Sizes
1 1/4
1 9/16
270 lb.
0.5 lb.
PB314P-08
3/8, 1/2
—
—
—
—
3 1/2 11/4
1 9/16
270 lb.
0.5 lb.
PB35P-06
3/8, 1/2
—
—
—
—
1 1/4
1 9/16
275 lb.
0.5 lb.
PB414P-06
3/8, 1/2
—
—
—
—
2
2 3/16
450 lb.
1.0 lb.
PB42-19
1 1/4
1 1/2
275 lb.
0.5 lb.
PB514P-08
2
2 3/16
650 lb.
1.25 lb. PB52-19
1/2, 5/8, 3/4,
1 3/16
PB52R-12
1/2, 5/8, 3/4
PB52D-12
1/2, 5/8, 3/4
2
2 3/16
700 lb.
1.5 lb.
PB62-19
1/2, 5/8, 3/4,
1 3/16
PB62R-12
1/2, 5/8, 3/4
PB62D-12
1/2, 5/8, 3/4
2
2 3/16
800 lb.
1.75 lb. PB82-19
1/2, 5/8, 3/4,
1 3/16
PB82R-12
1/2, 5/8, 3/4
PB82D-12
1/2, 5/8, 3/4
3
4
5
6
8
1/2, 5/8, 3/4,
Part No.
1 3/16
3/8, 1/2
PB42R-12
—
Sizes
1/2, 5/8, 3/4
—
PB42D-12
—
RE PL ACE ME NT WHE E LS
Sizes
APPLICATIONS:
Soft rubber tread rolls over floor joints and
small obstructions quietly and smoothly.
13
Part No.
3/8
DIA.
Inches
• Resistant To Chemicals, Caustics, And Mild Acids
HARD RUBBER (HR)
• Tread And Hub - Double bonded and mechanically interlocked
Plain Bore or
SR314P-06 *
APPLICATIONS:
Used in food handling environments,
health care and commercial or industrial
applications. A durable wheel that rolls
smoothly and cleans easily.
• Composition - Non marking grey tread on polyolefin core
Shipping Bore Less Roller Bearings
Weight
.25 lb.
RUBBER ON POLYOLEFIN (SP)
Standard Features
• Composition - Rubber wheel, hard core, soft tread
• Good Floor Protection - Quiet movement and cushioned ride
• Temperature Range Of - 40° to 158°F
Offers quiet mobility at relatively low cost. Not recommended where loads
may sit static for long periods as permanant flat spotting may occur.
3
Capacities to 700 lbs. THERMOPLASTIC
1/2, 5/8, 3/4
—
14
SOFT RUBBER (SR)
APPLICATIONS:
Standard Features
Most popular in light, general, and light medium duty series.
DIA.
Inches
Face
Inches
Hub
Length
Load
Capacity
3
1 1/ 4
1 9/16
175 lb.
1/ 2
1 5/16
1 9/16
4
5
1 1/ 4
1 9/16
1 1/ 4
1 9/16
.4 lb.
SR35P-06 *
200 lb.
.4 lb.
SR414P-06 *
3/8
200 lb.
1.7 lb.
SR514P-06 *
3/8
200 lb.
3/8
Hard wheel offers low rolling resistance. Will not flat spot under static load.
Load
Capacity
3
1 1/4
1 9/16
270 lb.
1/ 2
1 5/16
1 9/16
4
5
1 1/4
1 9/1 6
1 1/4
1 9/16
3
170 lb.
1 9/16
1 1/4
5
• Composition - Hard rubber molded throughout
• Good Load Rating & Good Floor Protection
• Temperature Range of -40° to 158°F
Hub
Length
3
1
3 /2 1 1/4
1 9/16
4
Standard Features
Face
Inches
Hub
Length
Shipping
Weight
6
8
Load Shipping
Capacity Weight
Ball Bearing
Sizes
Part No.
Sizes
Part No.
.5 lb.
SP3B-06
3/8
—
—
SP3D-06
3/8
180 lb.
.3 lb.
SP35B-06
3/8
—
—
SP35D-06
3/8
1 9/16
200 lb.
.3 lb.
SP4B-06
3/8
—
—
SP4D-06
3/8
2
2 3/16
350 lb.
1.2 lb.
—
—
1/2, 5/8, 3/4
SP42D-12
1/2, 5/8, 3/4
1 1/4
1 9/16
225 lb.
1.0 lb.
SP5B-06
3/8
—
SP5D-06
3/8
2
2 9/16
450 lb.
1.6 lb.
—
—
SP52R-12
1/2, 5/8, 3/4
SP52D-12
1/2, 5/8, 3/4
2
2 3/16
550 lb.
1.7 lb.
—
—
SP62R-12
1/2, 5/8, 3/4
SP62D-12
1/2, 5/8, 3/4
2
2 3/16
700 lb.
2.5 lb.
—
—
SP82R-12
1/2, 5/8, 3/4
SP82D-12
1/2, 5/8, 3/4
Plain Bore or
Bore Less Roller Bearings
Part No.
HR314P-06 *
3/8
275 lb.
.4 lb.
HR3514P-06 *
3/8
275 lb.
.4 lb.
HR414P-06 *
3/8
300 lb.
1.0 lb.
HR514P-06 *
3/8
APPLICATIONS:
Warehouse environments where floor
protection and noise reduction are required.
—
POLYOLEFIN (PB)
APPLICATIONS:
Used in food processing environments.
White color allows identification of
contaminants during steam cleaning.
Material will not absorb water and is
unaffected by blood and animal fats.
Its low cost and load carrying capacity
make polyolefin a popular material for
general warehouse applications.
Standard Features
• Composition - Injection molded polyolefin
MOLD-ON RUBBER (MR)
SP42R-12
Sizes
Sizes
.25 lb.
Delrin Bearing
Roller Bearing
Part No.
1 1/4
Popular in general and light medium duty series.
DIA.
Face
Inches Inches
• Resistant To Water, Solvents, Grease, and
Mild Acids
Optional Features
• Floor Protective
• White Polyolefin - (Change prefix PB to PW)
• FDA Approved
Standard Features
• Composition - Cushioned rubber tread permanently vulcanized to cast iron cores
• Recommended For - Quiet movement with medium to heavy loads or where
cushioning load is required
• Temperature Range Of -30° to 160°F • Zerk Fitting In Hub
DIA.
Inches
Face
Inches
Hub
Length
Load Shipping
Capacity Weight
4
5
6
8
2
2 3/16
350 lb.
2
2 3/16
2
2
Plain Bore or
Roller Bearing
Part No.
Sizes
Part No.
Sizes
1.5 lb.
MR42-19
1 3/16
MR42R-12
1/2, 5/8, 3/4
400 lb.
2.0 lb.
MR52-19
1 3/16
MR52R-12
1/2, 5/8, 3/4
2 3/16
410 lb.
2.3 lb.
MR62-19
1 3/16
MR62R-12
1/2, 5/8, 3/4
2 3/16
500 lb.
7.0 lb.
MR82-19
1 3/16
MR82R-12
1/2, 5/8, 3/4
DIA. Face
Hub
Load Shipping
Inches Inches Length Capacity Weight
Plain Bore or
PW62D-12
Roller Bearing
Delrin Bearing
Part No.
Sizes
Part No.
Sizes
1 1/4
1 9/16
270 lb.
0.5 lb.
PB314P-08
3/8, 1/2
—
—
—
—
3 1/2 11/4
1 9/16
270 lb.
0.5 lb.
PB35P-06
3/8, 1/2
—
—
—
—
1 1/4
1 9/16
275 lb.
0.5 lb.
PB414P-06
3/8, 1/2
—
—
—
—
2
2 3/16
450 lb.
1.0 lb.
PB42-19
1 1/4
1 1/2
275 lb.
0.5 lb.
PB514P-08
2
2 3/16
650 lb.
1.25 lb. PB52-19
1/2, 5/8, 3/4,
1 3/16
PB52R-12
1/2, 5/8, 3/4
PB52D-12
1/2, 5/8, 3/4
2
2 3/16
700 lb.
1.5 lb.
PB62-19
1/2, 5/8, 3/4,
1 3/16
PB62R-12
1/2, 5/8, 3/4
PB62D-12
1/2, 5/8, 3/4
2
2 3/16
800 lb.
1.75 lb. PB82-19
1/2, 5/8, 3/4,
1 3/16
PB82R-12
1/2, 5/8, 3/4
PB82D-12
1/2, 5/8, 3/4
3
4
5
6
8
1/2, 5/8, 3/4,
Part No.
1 3/16
3/8, 1/2
PB42R-12
—
Sizes
1/2, 5/8, 3/4
—
PB42D-12
—
Sizes
APPLICATIONS:
Soft rubber tread rolls over floor joints and
small obstructions quietly and smoothly.
13
Part No.
3/8
DIA.
Inches
• Resistant To Chemicals, Caustics, And Mild Acids
HARD RUBBER (HR)
• Tread And Hub - Double bonded and mechanically interlocked
Plain Bore or
SR314P-06 *
APPLICATIONS:
Used in food handling environments,
health care and commercial or industrial
applications. A durable wheel that rolls
smoothly and cleans easily.
• Composition - Non marking grey tread on polyolefin core
Shipping Bore Less Roller Bearings
Weight
.25 lb.
RUBBER ON POLYOLEFIN (SP)
Standard Features
• Composition - Rubber wheel, hard core, soft tread
• Good Floor Protection - Quiet movement and cushioned ride
• Temperature Range Of - 40° to 158°F
Offers quiet mobility at relatively low cost. Not recommended where loads
may sit static for long periods as permanant flat spotting may occur.
3
Capacities to 700 lbs. THERMOPLASTIC
1/2, 5/8, 3/4
—
14
POLYURETHANE ON POLYOLEFIN (PP)
APPLICATIONS:
Standard Features
Should not be used where possibility for shock or high
impact exists. Well suited for wet environments
(when supplied with delrin bearings).
• Composition - Polyurethane tread mechanically and chemically
bonded to a polyolefin core
• Resists Chemicals, Caustics, Acids, And Oils
• Quiet Rolling Yet Good Load Capacity
Alternative to polyurethane on steel or aluminum cores
yet offers the same long wearing tread characteristics.
Hub
Length
3
1 3/8
1 9/16
200 lb.
.5 lb.
PP3B-06
3 1/2
1 3/8
1 9/16
225 lb.
.3 lb.
1 3/8
1 9/16
250 lb.
2
2 3/16
1 3/8
5
6
8
APPLICATIONS:
Standard Features
Delrin Bearing
Roller Bearing
Part No.
Sizes
3/8
—
—
PP3D-06
3/8
PP35B-06
3/8
—
—
PP35D-06
3/8
.3 lb.
PP4B-06
3/8
—
—
PP4D-06
3/8
600 lb.
1.2 lb.
—
—
PP42R-12
1/2, 5/8, 3/4
PP42D-12
1/2, 5/8, 3/4
1 9/16
275 lb.
1.0 lb.
PP5B-06
—
—
—
PP5D-06
3/8
2
2 3/16
750 lb.
1.6 lb.
—
—
PP52R-12
1/2, 5/8, 3/4
PP52D-12
1/2, 5/8, 3/4
2
2 3/16
900 lb.
1.7 lb.
—
—
PP62R-12
1/2, 5/8, 3/4
PP62D-12
1/2, 5/8, 3/4
2
2 3/16
PP82R-12
1/2, 5/8, 3/4
PP82D-12
1/2, 5/8, 3/4
1000 lb.
2.5 lb.
—
REINFORCED THERMOPLASTIC (RT)
—
Part No.
Sizes
Standard Features
APPLICATIONS:
High resistance to shock and impact loads. Resists caustics
and chemicals. Will not absorb water. Suitable for food
processing environments.
DIA.
Inches
Face
Inches
3
Hub
Length
• Composition - Reinforced Thermoplastic
• Resists Shock and Impact Loads
Plain Bore or Bore Less
Shipping
Roller Bearing
Load
Capacity Weight
Roller Bearing
Part No.
Sizes
Part No. Sizes Part No.
RT32-19
1 3/16
RT32R-12
3/ 4
RT32D-12
1/ 2, 5/8, 3/ 4
RT42R-12
3/ 4
RT42D-12
1/ 2, 5/8, 3/ 4
4
2
800 lb.
2.0 lb.
RT42-19
5
6
8
2
2 3/16
1000 lb.
2.8 lb.
RT52-19
1 3/16
RT52R-12
3/ 4
RT52D-12
1/ 2, 5/8, 3/ 4
2
2 3/16
1200 lb.
3.0 lb.
RT62-19
1 3/16
RT62R-12
3/ 4
RT62D-12
1/ 2, 5/8, 3/ 4
2
2 3/16
1400 lb.
3.5 lb.
RT82-19
1 3/16
RT82R-12
3/ 4
RT82D-12
1/ 2, 5/8, 3/ 4
• Composition - Cast Iron Core with a
chemically bonded polyurethane tread
• Zerk Fitting In Hub - (5” Dia. up)
DIA.
Inches
3
1/4
4
5
6
8
Hub
Length
• Low Durometer Tread
Load Shipping Bore Less Roller Bearing
Capacity Weight
2
2 3/16
550 lb.
2
2 3/16
750 lb.
2
2 3/16
2
2
Roller Bearing
Part No.
Size
Size
Part No.
Size
3
300 lb.
0.3 lb.
KT314P-08
1/2
—
—
—
—
4
1 1/4
1 9/16
500 lb.
0.5 lb.
KT414P-08
1/2
—
—
—
—
2
2 3/16
700 lb.
1.2 lb.
KT42-19
1 3/16
KT42R-12
3/4
KT42D-12
1/2, 5/8, 3/4
1 1/4
1 9/16
700 lb.
0.9 lb.
KT514P-08
1/2
—
—
—
—
2
2 3/16
1000 lb.
1.6 lb.
KT52-19
1 3/16
KT52R-12
3/4
KT52D-12
1/2, 5/8, 3/4
6
2
2 3/16
1200 lb.
1.8 lb.
KT62-19
1 3/16
KT62R-12
3/4
KT62D-12
1/2, 5/8, 3/4
8
2
2 3/16
1500 lb.
2.6 lb.
KT82-19
1 3/16
KT82R-12
3/4
KT82D-12
1/2, 5/8, 3/4
5
Part No.
Delrin Bearing
1 9/16
Roller Bearing
Part No.
Sizes
Part No.
2.5 lb.
PI32-19
1 3/16
PI32R-12
1/2, 5/8, 3/4
3.0 lb.
PI42-19
1 3/16
PI42R-12
1/2, 5/8, 3/4
1050 lb.
3.0 lb.
PI52-19
1 3/16
PI52R-12
1/2, 5/8, 3/4
2 3/16
1200 lb.
4.5 lb.
PI62-19
1 3/16
PI62R-12
1/2, 5/8, 3/4
2 3/16
1500 lb.
7.0 lb.
PI82-19
1 3/16
PI82R-12
1/2, 5/8, 3/4
POLYURETHANE/SEVERE DUTY (PS)
APPLICATIONS:
• Composition - SAE-1030 Close grained grey iron core
These quality wheels offer 5-10 times the
normal life of rubber. Highest capacities
available in a floor protective wheel.
• Full 1” Polyurethane Tread On All Tapered Bearing Wheels
• Heavy Automotive Casting
4
5
6
Sizes
From general warehouse duty to extreme
use applications such as in line tow
systems and power drawn trailers.
Standard Features
Optional Features
• Low Durometer Tread - 80 shore A (consult factory)
DIA.
Inches
Optional Features
Plain Bore or
Face
Inches
1 1/4
Standard Features
General warehouse where high capacity
and floor protection are required.
• Tread Hardness - 55 durometer shore D.
Sizes
1 3/16
APPLICATIONS:
• Impact Resistance - Highest of floor protective wheels
Plain Bore or
Hub
Length Capacity Weight
Delrin Bearing
2 3/16
POLYURETHANE/IRON CORE (PI)
DIA.
Face
Inches Inches
2 3/16
1.1 lb.
Stands up to frequent steam cleaning,
exposure to moisture, and
temperature variances.
• Composition - Highest quality polyether polyurethane
• Solid Cast Construction - Eliminates tread separation or
bond failure
• Nylon Sealed Washers - On roller bearing wheels
• Abrasion Resistance - Highest of any floor protective wheel
• Chemical Resistance - Highest of floor protective wheels
• Low Rolling Resistance
• Optional Sealed Precision Ball Bearing
1 13/16
700 lb.
A preferred product in food processing
environments (with delrin bearings).
8
Plain Bore or
Face
Hub
Inches Length Capacity Weight
Roller Bearing
Tapered
Roller Bearing
Part No.
Size
Part No.
Size
PS42-19
1 3/16
PS42R-12
3/4
—
—
PS52-19
1 3/16
PS52R-12
3/4
—
—
PS62-19
1 3/16
PS62R-12
3/4
—
PS625-25
1 9/16
PS625R-16
1
PS625T-12
3/4
10 lb.
PS63-25
1 9/16
PS63R-16
1
PS63T-12
3/4
1350 lb.
10 lb.
PS82-19
1 3/16
PS82R-12
3/4
PS82T-12
3/4
2 3/ 4
2000 lb.
12 lb.
PS825-25
1 9/16
PS825R-16
1
PS825T-12
3/4
3 1/4
2500 lb.
13 lb.
PS83-29
1 13/16
PS83R-16
1
PS83T-12
3/4
2
2 1/4
2
2 1/4
2
2 1/4
2 1/2
2 5/ 8
3”
3 1/4
2000 lb.
2
2 1/4
2 1/2
3
580 lb.
700 lb.
1000 lb.
1650 lb.
2.7 lb.
3 lb.
5 lb.
9 lb.
Part No.
Face
Inches
4
15
Ball Bearing
Load Shipping
Capacity Weight Part No. Sizes
DIA.
Inches
SOLID URETHANE (KT)
Size
—
16
POLYURETHANE ON POLYOLEFIN (PP)
APPLICATIONS:
Standard Features
Should not be used where possibility for shock or high
impact exists. Well suited for wet environments
(when supplied with delrin bearings).
• Composition - Polyurethane tread mechanically and chemically
bonded to a polyolefin core
• Resists Chemicals, Caustics, Acids, And Oils
• Quiet Rolling Yet Good Load Capacity
Alternative to polyurethane on steel or aluminum cores
yet offers the same long wearing tread characteristics.
Hub
Length
3
1 3/8
1 9/16
200 lb.
.5 lb.
PP3B-06
3 1/2
1 3/8
1 9/16
225 lb.
.3 lb.
1 3/8
1 9/16
250 lb.
2
2 3/16
1 3/8
5
6
8
APPLICATIONS:
Standard Features
Delrin Bearing
Roller Bearing
Part No.
Sizes
3/8
—
—
PP3D-06
3/8
PP35B-06
3/8
—
—
PP35D-06
3/8
.3 lb.
PP4B-06
3/8
—
—
PP4D-06
3/8
600 lb.
1.2 lb.
—
—
PP42R-12
1/2, 5/8, 3/4
PP42D-12
1/2, 5/8, 3/4
1 9/16
275 lb.
1.0 lb.
PP5B-06
—
—
—
PP5D-06
3/8
2
2 3/16
750 lb.
1.6 lb.
—
—
PP52R-12
1/2, 5/8, 3/4
PP52D-12
1/2, 5/8, 3/4
2
2 3/16
900 lb.
1.7 lb.
—
—
PP62R-12
1/2, 5/8, 3/4
PP62D-12
1/2, 5/8, 3/4
2
2 3/16
PP82R-12
1/2, 5/8, 3/4
PP82D-12
1/2, 5/8, 3/4
1000 lb.
2.5 lb.
—
REINFORCED THERMOPLASTIC (RT)
—
Part No.
Sizes
Standard Features
APPLICATIONS:
High resistance to shock and impact loads. Resists caustics
and chemicals. Will not absorb water. Suitable for food
processing environments.
DIA.
Inches
Face
Inches
3
Hub
Length
• Composition - Reinforced Thermoplastic
• Resists Shock and Impact Loads
Plain Bore or Bore Less
Shipping
Roller Bearing
Load
Capacity Weight
Roller Bearing
Part No.
Sizes
Part No. Sizes Part No.
RT32-19
1 3/16
RT32R-12
3/ 4
RT32D-12
1/ 2, 5/8, 3/ 4
RT42R-12
3/ 4
RT42D-12
1/ 2, 5/8, 3/ 4
4
2
800 lb.
2.0 lb.
RT42-19
5
6
8
2
2 3/16
1000 lb.
2.8 lb.
RT52-19
1 3/16
RT52R-12
3/ 4
RT52D-12
1/ 2, 5/8, 3/ 4
2
2 3/16
1200 lb.
3.0 lb.
RT62-19
1 3/16
RT62R-12
3/ 4
RT62D-12
1/ 2, 5/8, 3/ 4
2
2 3/16
1400 lb.
3.5 lb.
RT82-19
1 3/16
RT82R-12
3/ 4
RT82D-12
1/ 2, 5/8, 3/ 4
• Composition - Cast Iron Core with a
chemically bonded polyurethane tread
• Zerk Fitting In Hub - (5” Dia. up)
DIA.
Inches
3
1/4
4
5
6
8
Hub
Length
• Low Durometer Tread
Capacity Weight
2
2 3/16
550 lb.
2
2 3/16
750 lb.
2
2 3/16
2
2
Roller Bearing
Part No.
Size
Size
Part No.
Size
3
300 lb.
0.3 lb.
KT314P-08
1/2
—
—
—
—
4
1 1/4
1 9/16
500 lb.
0.5 lb.
KT414P-08
1/2
—
—
—
—
2
2 3/16
700 lb.
1.2 lb.
KT42-19
1 3/16
KT42R-12
3/4
KT42D-12
1/2, 5/8, 3/4
1 1/4
1 9/16
700 lb.
0.9 lb.
KT514P-08
1/2
—
—
—
—
2
2 3/16
1000 lb.
1.6 lb.
KT52-19
1 3/16
KT52R-12
3/4
KT52D-12
1/2, 5/8, 3/4
6
2
2 3/16
1200 lb.
1.8 lb.
KT62-19
1 3/16
KT62R-12
3/4
KT62D-12
1/2, 5/8, 3/4
8
2
2 3/16
1500 lb.
2.6 lb.
KT82-19
1 3/16
KT82R-12
3/4
KT82D-12
1/2, 5/8, 3/4
5
Part No.
Delrin Bearing
1 9/16
Roller Bearing
Part No.
Sizes
Part No.
2.5 lb.
PI32-19
1 3/16
PI32R-12
1/2, 5/8, 3/4
3.0 lb.
PI42-19
1 3/16
PI42R-12
1/2, 5/8, 3/4
1050 lb.
3.0 lb.
PI52-19
1 3/16
PI52R-12
1/2, 5/8, 3/4
2 3/16
1200 lb.
4.5 lb.
PI62-19
1 3/16
PI62R-12
1/2, 5/8, 3/4
2 3/16
1500 lb.
7.0 lb.
PI82-19
1 3/16
PI82R-12
1/2, 5/8, 3/4
POLYURETHANE/SEVERE DUTY (PS)
APPLICATIONS:
• Composition - SAE-1030 Close grained grey iron core
These quality wheels offer 5-10 times the
normal life of rubber. Highest capacities
available in a floor protective wheel.
• Full 1” Polyurethane Tread On All Tapered Bearing Wheels
• Heavy Automotive Casting
4
5
6
Sizes
From general warehouse duty to extreme
use applications such as in line tow
systems and power drawn trailers.
Standard Features
Optional Features
• Low Durometer Tread - 80 shore A (consult factory)
DIA.
Inches
Optional Features
Plain Bore or
Face
Inches
1 1/4
Standard Features
General warehouse where high capacity
and floor protection are required.
• Tread Hardness - 55 durometer shore D.
Sizes
1 3/16
APPLICATIONS:
• Impact Resistance - Highest of floor protective wheels
Plain Bore or
Hub
Delrin Bearing
2 3/16
POLYURETHANE/IRON CORE (PI)
DIA.
Face
Inches Inches
2 3/16
1.1 lb.
Stands up to frequent steam cleaning,
exposure to moisture, and
temperature variances.
• Composition - Highest quality polyether polyurethane
• Solid Cast Construction - Eliminates tread separation or
bond failure
• Nylon Sealed Washers - On roller bearing wheels
• Abrasion Resistance - Highest of any floor protective wheel
• Chemical Resistance - Highest of floor protective wheels
• Low Rolling Resistance
• Optional Sealed Precision Ball Bearing
1 13/16
700 lb.
A preferred product in food processing
environments (with delrin bearings).
8
Plain Bore or
Face
Hub
Roller Bearing
Tapered
Roller Bearing
Part No.
Size
Part No.
Size
PS42-19
1 3/16
PS42R-12
3/4
—
—
PS52-19
1 3/16
PS52R-12
3/4
—
—
PS62-19
1 3/16
PS62R-12
3/4
—
PS625-25
1 9/16
PS625R-16
1
PS625T-12
3/4
10 lb.
PS63-25
1 9/16
PS63R-16
1
PS63T-12
3/4
1350 lb.
10 lb.
PS82-19
1 3/16
PS82R-12
3/4
PS82T-12
3/4
2 3/ 4
2000 lb.
12 lb.
PS825-25
1 9/16
PS825R-16
1
PS825T-12
3/4
3 1/4
2500 lb.
13 lb.
PS83-29
1 13/16
PS83R-16
1
PS83T-12
3/4
2
2 1/4
2
2 1/4
2
2 1/4
2 1/2
2 5/ 8
3”
3 1/4
2000 lb.
2
2 1/4
2 1/2
3
580 lb.
700 lb.
1000 lb.
1650 lb.
2.7 lb.
3 lb.
5 lb.
9 lb.
Part No.
Face
Inches
4
15
Ball Bearing
Load Shipping
Capacity Weight Part No. Sizes
DIA.
Inches
SOLID URETHANE (KT)
Size
—
16
PHENOLIC (PH)
APPLICATIONS:
High capacity at a realitively low cost. Resistant to oils,
water, mild acids and alkai solutions. Shock and impact
resistant. Suitable for a broad range of applications, used
in bakeries, smoke house operations, and food processing.
4
5
2
2
2
3
2
3
6
8
LEVELERS
Standard Features
• Composition - Phenolic Resin Compound
• High Capacity Yet Floor Protective
• Temperature Range Of 65° to 250°F (intermittent to 300°F)
• Sealed Washers - On all 2” wide wheels
Plain Bore or
Hub
Length
Capacity Weight
2 3/16
2 3/16
2 3/16
3 1/4
2 3/16
3 1/4
800 lb.
1000 lb.
1200 lb.
2000 lb.
1400 lb.
2500 lb.
1.5 lb.
1.75 lb.
2.5 lb.
5.0 lb.
4.0 lb.
7.0 lb.
Optional Features
FLOOR TRUCK LOCKS
• Roller Bearing Seals - (Suffix -SW)
Roller Bearing
LOW PROFILE
CASTERS
Delrin Bearing
Part No.
Sizes
Part No.
Sizes
Part No.
Sizes
PH42-19
PH52-19
PH62-19
PH63-31
PH82-19
PH83-31
1 3/16
1 3/16
1 3/16
1 15/16
1 3/16
1 15/16
PH42R-12
PH52R-12
PH62R-12
PH63R-16
PH82R-12
PH83R-16
1/2, 5/8, 3/4
1/2, 5/8, 3/4
PH42D-12
PH52D-12
PH62D-12
PH63D-16
PH82D-12
PH83D-16
1/2, 5/8, 3/4
1/2, 5/8, 3/4
1/2, 5/8, 3/4
1, 1 1/4
1/2, 5/8, 3/4
1, 1 1/4
1/2, 5/8, 3/4
1, 1 1/4
1/2, 5/8, 3/4
1, 1 1/4
High Temperature Compound - (change PH to HT, example: HT42R-12) for 475°F continuous or 525°F intermittent use
CAST IRON (SS)
APPLICATIONS:
High capacity requirements where
floor protection is not a concern.
Excellent where load sits static
for long periods.
Standard Features
4
5
6
8
V-GROOVED (VG)
Used in tracking application of all
types where free flow is desired.
SPRING LOADED
CASTERS
SCAFFOLD
CASTERS
• Composition - Cast Iron also known as “Semi-Steel” due to the steel in the iron
• Highest Of Temperature Ranges
• Machined Faces - For a smooth, concentric rolling surface
Optional Features
• Cast Iron Wheels Provide - High capacities with exceptional service life • Roller Bearing Seals - (Suffix -SW)
DIA.
Inches
APPLICATIONS:
FULL-PNEUMATIC
CASTERS
Plain Bore or
Roller Bearing
Face
Hub
Load Shipping Bore Less Roller Bearings
Sizes
Part No.
Part No.
Sizes
SS42-19
1 3/16
SS42R-12
1/2, 5/8, 3/4
SS52R-12
1/2, 5/8, 3/4
2
2 3/16
2
2 3/16
900 lb.
3.0 lb.
SS52-19
1 3/16
2
2 3/16
1000 lb.
5.2 lb.
SS62-19
1 3/16
SS62R-12
1/2, 5/8, 3/4
2
2 3/16
1000 lb.
7.5 lb.
SS82-19
1 3/16
SS82R-12
1/2, 5/8, 3/4
700 lb.
2.7 lb.
SPECIAL BORES,
KEYWAYS
COMPONENT PARTS
Axle
Washer
Standard Features
• Machined Face
• Relief Groove - Assures correct weight distribution
and makes the wheel self cleaning
• Composition - Cast Iron
DIA.
Inches
4
5
6
Face
Inches
Hub
Load
Shipping
• Roller Bearing Seals - (Suffix-SW)
Groove Size
Part No.
Sizes
Depth
4.0 lb.
7/8
7/16
VG42R-12
1/2, 5/8, 3/4
7/16
VG62R-12
1/2, 5/8, 3/4
7/16
VG625R-12
1, 1 1/4
2
2
2 3/16
1000 lb.
7.0 lb.
7/8
2 1/2
2 3/4
1600 lb.
9.5 lb.
7/8
Spanner Bushing
Roller Bearing
Width
2 3/16
800 lb.
Bearing
Optional Features
HIGH STYLE
CASTERS
M A N Y M O R E P R O D U C T S AVA I L A B L E
DIA.
Face
Inches Inches
SAMPLES OF CASTERS AND OTHER PRODUCTS
www.mhscaster.com
17
18
PHENOLIC (PH)
APPLICATIONS:
High capacity at a realitively low cost. Resistant to oils,
water, mild acids and alkai solutions. Shock and impact
resistant. Suitable for a broad range of applications, used
in bakeries, smoke house operations, and food processing.
4
5
2
2
2
3
2
3
6
8
LEVELERS
Standard Features
• Composition - Phenolic Resin Compound
• High Capacity Yet Floor Protective
• Temperature Range Of 65° to 250°F (intermittent to 300°F)
• Sealed Washers - On all 2” wide wheels
Plain Bore or
Hub
Length
Capacity Weight
2 3/16
2 3/16
2 3/16
3 1/4
2 3/16
3 1/4
800 lb.
1000 lb.
1200 lb.
2000 lb.
1400 lb.
2500 lb.
1.5 lb.
1.75 lb.
2.5 lb.
5.0 lb.
4.0 lb.
7.0 lb.
Optional Features
FLOOR TRUCK LOCKS
• Roller Bearing Seals - (Suffix -SW)
Roller Bearing
LOW PROFILE
CASTERS
Delrin Bearing
Part No.
Sizes
Part No.
Sizes
Part No.
Sizes
PH42-19
PH52-19
PH62-19
PH63-31
PH82-19
PH83-31
1 3/16
1 3/16
1 3/16
1 15/16
1 3/16
1 15/16
PH42R-12
PH52R-12
PH62R-12
PH63R-16
PH82R-12
PH83R-16
1/2, 5/8, 3/4
1/2, 5/8, 3/4
PH42D-12
PH52D-12
PH62D-12
PH63D-16
PH82D-12
PH83D-16
1/2, 5/8, 3/4
1/2, 5/8, 3/4
1/2, 5/8, 3/4
1, 1 1/4
1/2, 5/8, 3/4
1, 1 1/4
1/2, 5/8, 3/4
1, 1 1/4
1/2, 5/8, 3/4
1, 1 1/4
High Temperature Compound - (change PH to HT, example: HT42R-12) for 475°F continuous or 525°F intermittent use
CAST IRON (SS)
APPLICATIONS:
High capacity requirements where
floor protection is not a concern.
Excellent where load sits static
for long periods.
Standard Features
4
5
6
8
V-GROOVED (VG)
Used in tracking application of all
types where free flow is desired.
SPRING LOADED
CASTERS
SCAFFOLD
CASTERS
• Composition - Cast Iron also known as “Semi-Steel” due to the steel in the iron
• Highest Of Temperature Ranges
• Machined Faces - For a smooth, concentric rolling surface
Optional Features
• Cast Iron Wheels Provide - High capacities with exceptional service life • Roller Bearing Seals - (Suffix -SW)
DIA.
Inches
APPLICATIONS:
FULL-PNEUMATIC
CASTERS
Plain Bore or
Roller Bearing
Face
Hub
Load Shipping Bore Less Roller Bearings
Sizes
Part No.
Part No.
Sizes
SS42-19
1 3/16
SS42R-12
1/2, 5/8, 3/4
SS52R-12
1/2, 5/8, 3/4
2
2 3/16
2
2 3/16
900 lb.
3.0 lb.
SS52-19
1 3/16
2
2 3/16
1000 lb.
5.2 lb.
SS62-19
1 3/16
SS62R-12
1/2, 5/8, 3/4
2
2 3/16
1000 lb.
7.5 lb.
SS82-19
1 3/16
SS82R-12
1/2, 5/8, 3/4
700 lb.
2.7 lb.
SPECIAL BORES,
KEYWAYS
COMPONENT PARTS
Axle
Washer
Standard Features
• Machined Face
• Relief Groove - Assures correct weight distribution
and makes the wheel self cleaning
• Composition - Cast Iron
DIA.
Inches
4
5
6
Face
Inches
Hub
Load
Shipping
• Roller Bearing Seals - (Suffix-SW)
Groove Size
Part No.
Sizes
Depth
4.0 lb.
7/8
7/16
VG42R-12
1/2, 5/8, 3/4
7/16
VG62R-12
1/2, 5/8, 3/4
7/16
VG625R-12
1, 1 1/4
2
2
2 3/16
1000 lb.
7.0 lb.
7/8
2 1/2
2 3/4
1600 lb.
9.5 lb.
7/8
Spanner Bushing
Roller Bearing
Width
2 3/16
800 lb.
Bearing
Optional Features
HIGH STYLE
CASTERS
M A N Y M O R E P R O D U C T S AVA I L A B L E
DIA.
Face
Inches Inches
SAMPLES OF CASTERS AND OTHER PRODUCTS
www.mhscaster.com
17
18
Headquarters
1501 Iron Street
Kansas City, MO 64116 USA
Phone: 1-800-444-7746 • 1-816-471-1020 • Fax: 1-816-221-1543
www. m hs c a s t e r. c o m
Copyright © 2011 by WTF Inc. All rights reser ved.

www.mhscaster.com - Kaman Industrial Technologies

Transcription

Similar documents

SerieS 3 HeAVY DUTY (ColD ForgeD)