Cable Gland Selection

Transcription

Cable
Gland
Terminations
Remora Electrical Limited
Introduction
Company
Remora Electrical Ltd was established in 1973 to distribute cable glands,
junction boxes & stopping plugs, reducers & adaptors. We are conveniently
located close to the M1 near Sheffield, we are the only distributor for CCG
products for the mining industry.
Over the last decade we have grown our mining business with the help of the
mines & OEMs both in the UK & Europe. We carry comprehensive stocks
of ATEX approved mining products. We also stock a range of ATEX certified
adaptor plates to enable the direct fitting of our glands into a range of European manufactured motors & switchgear along with spigot adaptors.
We also supply a wide range of industrial products suitable for use in the
mines - this catalogue is designed for the mining industry & shows the range
of products we sell. This is not our full range – if your requirements do not
appear in this mining catalogue – give our knowledgeable team a call they
will be able to help.
All items from our UK stores are despatched overnight – for next day delivery
saving you valuable time and money. If however we need to order on the
factory our lead times are based on surprisingly short turn-around.
The factory in South Africa has a wealth of experience working closely within
its own mining industry to develop cable glands which are designed and
manufactured to withstand the robust environments of the mines.
The simplicity of the ‘Captive Components’ and ‘Built in Seals’ concepts
means that no matter where in the world the products are being installed, the
simplest of instructions will ensure that all parts have been correctly fitted.
All products are manufactured to ISO 90001-2000 underwritten by
Underwriters List (USA). CCG have a ATEX certificate for Group I products
ECS06ATEX2044. CCG glands are also approved for Group I applications in
South Africa and China as well as for Group II mines in Australia.
Contents
Cable Gland Selection
1
Armortex Cable Gland
2
FLP Cable Gland
3
FLP-TR Cable Gland
4
FLP-HOSE Cable Gland
5
Barrier Tex A Cable Gland
6
Barrier Tex F Cable Gland
7
CROCLOCK CR-CB Cable Gland
8
CROCLOCK CR-UB Cable Gland
9
HAS Spigot Adaptor / Reducer
10
HAP1 Motor/Switchgear Reducer
11
12
13
14
15
Motor/Switchgear Salvage Plate
16
Cable Gland Reducers / Adaptors
17
A2 Industrial Cable Gland
18
CW Industrial Cable Gland
19
IP Plus Industrial Cable Gland
20
Utility Junction Box
21
Handifit Junction Box
22
Cable Gland Accessories
23
Notes Section
24
Cable Gland
Selection
Remora
Electrical Ltd
Cable Gland
Gland Selection
Selection
Cable
We offer cable glands to cover the full range of cables including armoured and nonarmoured and applications from general industrial use through increased saftey,
flameproof and explosion proof. We have only listed the cable glands specifically
designed for the mining applications, a full range is available on request.
Do I Need A Barrier Gland ?
Should your cable be filled, mining approved and substantially compact and circular,
has extruded bedding and the fillers are non-hygroscopic you may utilise a flameproof cable gland entry devices, incorporation a sealing ring greater than 20mm as
per EN 50018 - 2000 Annex C.
The following cable glands can fulfill this requirement:Armoured Cables
Non-armoured Cables
ARMORTEX
FLP-TR
FLP
FLP-HOSE
If your cable does not meet the above specification then barrier type cable glands
are available and provide a compound barrier seal around the conductor and an
enviromental seal on the outer sheath:Armoured Cables
1
Tel
Non-armoured Cables
BARRIER TEX A
BARRIER TEX F
CROCLOCK CR-C
CROCLOCK CR-U
+44 (0) 1226 352 000
www.remora.net
Mining Glands
Armortex
Remora
Electrical Ltd
ARMORTEX EEx de I/IIC I M2 / II 2 GD Cable Gland
The Armortex Gland is designed with the MAC Multi Armour Captive-Component, providing an armour clamp and earth bond for
Steel wire, Braid, Tape & Pliable wire armoured cable. Designed for hazardous area EExde group I (mining) & group IIC (surface)
applications suitable for both indoor & outdoor. Seals on both inner and outer sheaths, to IP66/67/68 when fitted with sealing gasket
provided.
Gland
Code
Size
052200A
0522-0A
052201A
Entry Thread
Cable Details (diameter)
Min-Max ‘A’
Max ‘B’
Armour
Dia
Min-Max
Max Length
‘E’
Hexagonal
Details (max)
Metric / NPT ‘C’
‘D’
‘Flats’
‘Crns’
00 - M20ss
M20
½
15
3.0 - 8.0
13.5
0.2-1.25
73
25
28
0 - M20s
M20
½
15
8.0 - 11.5
16.0
0.2-1.25
73
25
28
1 - M20
M20
½ ¾
15
11.5 - 14.0
19.0
0.2-1.25
78
30
34
052202A
2 - M25
M25
¾ 1”
15
14.0 - 20.5
26.5
0.2-1.6
85
40
45
052203A
3 - M32
M32
1” 1¼
15
20.0 - 26.5
33.0
0.2-2.0
95
45
51
052204A
4 - M40
M40
1¼ 1½
20
26.5 - 32.5
40.5
0.3-2.0
105
55
62
052255A
5 - M50s
M50
1½
2”
20
32.5 - 38.0
46.0
0.4-2.5
108
74
83
052205A
5 - M50
M50
1½
2”
20
38.0 - 44.5
52.0
0.4-2.5
108
74
83
052265A
6 - M63s
M63
2” 2½
20
44.5 - 50.0
60.0
0.4-2.5
145
82
92
052206A
6 - M63
M63
2” 2½
20
50.0 - 56.0
67.0
0.4-2.5
145
82
92
052207A
7 - M75
M75
2½
20
56.0 - 65.0
78.0
0.4-2.5
158
96
108
All dimensions are in mm
Features and Benefits
• Glands available in both brass self colour & brass nickel plated at no extra cost.
• No need to change seals or reverse cones or cone rings to accommodate different types of armoured cable.
• Captive cone and ring ensure no loose parts during assembly.
• Extra long captive explosion proof seal ensures built in safety.
• Armour clamp components can be inspected after installation.
• Gland can be used on Exd enclosures greater than 2 litres volume.
• Complete with orange thread cap / safety gauge for correct gland selection.
Technical Data
Type
ARMORTEX
Gland Material Brass (Self Colour & Nickel Plated)
Seal Material Thermoplastic Elastomer
Cable Type Steel Wire, Braid, Tape, Pliable Wire Armour
Armour Clamping Multi Armour Cone and Cone Ring
Sealing Area
Inner and outer sheath
Accessories
Spigot flange adaptors, Motor/Switchgear
adaptor plate, reducer/adaptor, lock nut,
earth tag & shroud
Standards and Certifications
Hazardous Area Classification
SANS / SABS IEC
Zone 1, 2, 21 and 22 Exd I/IIC, Exe I/IIC
and DIP A21
CENELEC / ATEX
Category 2, Category 3, EExde IIC 2 GD
EExd I M2
EN50014:1997E
DEMKO 01 ATEX 130325X
EN50018:2000E
EPSILON 06 ATEX 2044
EN50019:2000E
EN50281-1-1:1999E
Operating Temperature -30 to 130 °C
Alternative Certification Options Available:• South Africa
[email protected]
Fax
+44 (0)1226 360 510
• Chinese
2
Mining Glands
FLP
Remora
Electrical Ltd
FLP EEx de I/IIC I M2 / II 2 GD Cable Gland
The FLP Gland is designed with the MAC Multi Armour Captive-Component, providing an armour clamp and earth bond for Steel
wire, Braid, Tape & Pliable wire armoured cable. Designed for hazardous area EExde group I (mining) & group IIC (surface)
applications suitable for indoor use. Seals on inner sheath only, to IP66/67/68 when fitted with sealing gasket provided.
Entry Thread
Gland
Code
Size
052100A
00 - M20ss
M20
½
15
3.0 - 8.0
16.0
0521-0A
0 - M20s
M20
½
15
8.0 - 11.5
16.0
‘D’
Min-Max ‘A’
Max ‘B’
Hexagonal
Details (max)
Max Length
‘E’
‘Flats’
‘Crns’
46
25
28
46
25
28
052101A
1 - M20
M20
½ ¾
15
11.5 - 14.0
19.0
48
30
34
052102A
2 - M25
M25
¾ 1”
15
14.0 - 20.5
26.5
60
42
47
052103A
3 - M32
M32
1” 1¼
15
20.0 - 26.5
33.0
76
47
53
052104A
4 - M40
M40
1¼ 1½
20
26.5 - 32.5
40.5
84
60
68
052155A
5 - M50s
M50
1½ 2”
20
32.5 - 38.0
46.0
90
74
83
052105A
5 - M50
M50
1½ 2”
20
38.0 - 44.5
52.0
90
74
83
052165A
6 - M63s
M63
2” 2½
20
44.5 - 50.0
60.0
96
85
96
052106A
6 - M63
M63
2” 2½
20
50.0 - 56.0
67.0
96
85
96
052207A
7 - M75
M75
2½
20
56.0 - 65.0
78.0
105
96
108
• Two part handling, freely rotating captive cone for earth continuity and armour clamping.
• Factory fitted with a specially formulated elastomeric seal provides built-in safety.
• Captive cone and ring ensure no loose parts during assembly.
Technical Data
FLP
Type
Inner sheath
Sealing Area
Accessories
earth tag & shroud
SANS / SABS IEC
and DIP A21
CENELEC / ATEX
EExd I M2
EN50014:1997E
EN50018:2000E
EN50019:2000E
EN50281-1-1:1999E
3
Tel
+44 (0) 1226 352 000
• Chinese
www.remora.net
Mining Glands
FLP-TR
Remora
Electrical Ltd
FLP-TR EEx de I/IIC I M2 / II 2 GD Cable Gland
The FLP-TR Compression Gland is designed for use with unarmoured elastomeric and plastic cables where it is necessary to provide an flameproof seal. Fitted with two specially formulated elastomeric seals. Inner seals on the cable sheath. Harder outer seal
grips the cable, giving superior cable retention and IP rating. Seals on the cable outer sheath, to IP66/67/68 when fitted with sealing
gasket provided.
Gland
Code
Size
052400A
0524-0A
Entry Thread
Cable Details
(diameter)
Min-Max ‘A’
Max Length
‘E’
‘D’
00 - M20ss
M20
½
15
3.5 - 8.5
0 - M20s
M20
½
15
8.0 - 11.5
052401A
1 - M20
M20
½ ¾
15
052402A
2 - M25
M25
¾ 1”
15
052403A
3 - M32
M32
1” 1¼
15
20.0 - 26.5
052404A
4 - M40
M40
1¼ 1½
20
052455A
5 - M50s
M50
1½
2”
20
052405A
5 - M50
M50
1½
2”
052465A
6 - M63s
M63
052406A
6 - M63
M63
052407A
7 - M75
M75
Hexagonal
Details (max)
‘Flats’
‘Crns’
57
25
28
57
25
28
11.5 - 14.0
59
30
34
14.0 - 20.5
71
42
47
87
47
53
26.5 - 32.5
96
60
68
32.5 - 38.0
112
74
83
20
38.0 - 44.5
112
74
83
2” 2½
20
44.5 - 50.0
124
85
96
2” 2½
20
50.0 - 56.0
124
85
96
2½
20
56.0 - 65.0
134
96
108
• Fitted with specifically formulated captive elastomeric seals, built-in safety.
• No loose parts that can get lost during assembly.
• Provided with an extra hard gripper seal to grip cable.
Technical Data
FLP-TR
Type
Cable Type Unarmoured TRS
Outer sheath
Sealing Area
Accessories
earth tag & shroud
SANS / SABS IEC
and DIP A21
CENELEC / ATEX
EExd I M2
EN50014:1997E
EN50018:2000E
EN50019:2000E
EN50281-1-1:1999E
[email protected]
Fax
+44 (0)1226 360 510
• Chinese
4
Mining Glands
FLP-HOSE
Remora
Electrical Ltd
FLP-HOSE EEx de I/IIC I M2 / II 2 GD Cable Gland
The FLP-HOSE Compression Gland is designed for use with unarmoured elastomeric and plastic cables where it is necessary to
provide an flameproof seal. The male spigot allows protective hose to be secured at the back of the gland. Seals on the outer sheath
of the cable, to IP66/67/68 when fitted with sealing gasket provided.
Gland
Code
Size
Entry Thread
‘D’
Cable Details
Min-Max ‘A’
To Suit
Hose Size
‘B’
Hexagonal
Details (max)
‘Flats’
‘Crns’
0527-0A
0 - M20s
M20
½
15
8.0 - 11.5
½” - 13mm
25
28
052701A
1 - M20
M20
½ ¾
15
11.5 - 14.0
¾” - 19mm
30
34
052702A
2 - M25
M25
¾ 1”
15
14.0 - 20.5
1” - 25mm
42
47
052703A
3 - M32
M32
1” 1¼
15
20.0 - 26.5
1¼” - 32mm
47
53
052704A
4 - M40
M40
1¼ 1½
20
26.5 - 32.5
1½” - 38mm
60
68
052765A
5 - M50s
M50
1½ 2
20
32.5 - 38.0
1¾” - 45mm
74
83
052705A
5 - M50
M50
1½ 2
20
38.0 - 44.5
2” - 50mm
74
83
052765A
6 - M63s
M63
2 2½
20
44.5 - 50.0
2¼” - 57mm
85
96
052706A
6 - M63
M63
2 2½
20
50.0 - 56.0
2½” - 63mm
85
96
052707A
7 - M75
M75
2½ 3
20
56.0 - 68.0
3” - 76mm
96
108
• Factory fitted with a specially formulated elastomeric seal provides built-in safety.
• Complete with spigot to attach a hose for cable protection.
Technical Data
Type
FLP-HOSE
Cable Type Unarmoured TRS
Sealing Area
Outer sheath
Accessories
earth tag & shroud
SANS / SABS IEC
and DIP A21
CENELEC / ATEX
EExd I M2
EN50014:1997E
EN50018:2000E
EN50019:2000E
EN50281-1-1:1999E
5
Tel
+44 (0) 1226 352 000
• Chinese
www.remora.net
Mining Glands
Barrier Tex A
Remora
Electrical Ltd
Barrier Tex A Exd I/IIC, Exe I/II, I M2/II 2GD, Ex tD Cable Gland
The Barrier Tex A Gland is designed with the MAC Multi Armour Captive-Component, providing an armour clamp and earth bond
for Steel wire, Braid, Tape & Pliable wire armoured cable. Providing a flameproof compound barrier seal over the inner cores of the
cable, an outer IP seal over the outer sheath of the cable and an armour clamp by means of a cone and cone ring. Seals to IP66/68
when fitted with sealing gasket provided.
Entry Thread
Gland
Code
Size
052500A
00 - M20ss
M20
½
0525-0A
0 - M20s
M20
½
Metric / NPT
Minimum
Installation
Torgue
Compound Seal Range
Minimum
Armour
Wire
Hexagonal
Across
Flats
8.0-13.5
0.9
24
11.5-16.0
0.9
24
Max Dia
Over
Cores
Max No
of Cores
Overall
Cable Dia
(Min/Max)
25
9
6
25
9
6
052501A
1 - M20
M20
½ ¾
28
11
10
14.5-21.0
0.9
24
052502A
2 - M25
M25
¾ 1”
36
16
20
20.5-27.0
1.25
33
052503A
3 - M32
M32
1” 1¼
44
22
40
26.5-33.5
1.25
47
052504A
4 - M40
M40
1¼ 1½
52
27
60
33.0-43.0
1.6
58
052505A
5 - M50
M50
2”
65
37
80
42.5-52.5
2.0
63
052506A
6 - M63
M63
2½
85
48
100
52.5-65.5
2.5
73
• No need to change seals or reverse cones or cone rings to accommodate different types of armoured cable.
• Armour clamp components can be inspected after installation.
Technical Data
Type
BARRIER TEX A
Seal Material Thermoplastic Elastomer (Outer Seal)
Sealing Area
Accessories
earth tag & shroud
IEC
Extd, A21
CENELEC / ATEX
Category 2, Category 3, EExde IIC 2GD
EN60079-0:2006
EN60079-1:2004
EN60079-7:2003
EN61241-0:2006
EN61241-1:2004
SIRA 09ATEX1044X
[email protected]
Fax
+44 (0)1226 360 510
6
Mining Glands
Barrier Tex F
Remora
Electrical Ltd
Barrier Tex F Exd I/IIC, Exe I/II, I M2/II 2GD, Ex tD Cable Gland
The Barrier Tex F Gland is designed for use with unarmoured elastomeric and plastic cables where it is necessary to provide an
flameproof seal. Barrier Tex F provides a flameproof compound barrier seal over the inner cores of the cable and an outer IP gripper
seal. Harder outer seal grips the cable, giving superior cable retention and IP rating. Seals on the cable outer sheath, to IP66/68 when
fitted with sealing gasket provided.
Entry Thread
Compound Seal Range
Metric
NPT
Minimum
Installation
Torgue
00 - M20ss
M20
½
35
8
6
5.0-8.0
25
0 - M20s
M20
½
35
9
6
8.0-11.0
25
052601A
1 - M20
M20
½ ¾
50
11
10
11.0-15.5
28
052602A
2 - M25
M25
¾ 1”
50
16
20
15.0-20.5
36
052603A
3 - M32
M32
1” 1¼
70
22
40
20.0-26.5
44
052604A
4 - M40
M40
1¼ 1½
87
27
60
26.0-34.5
52
052655A
5 - M50s
M50
2”
110
35
80
32.5-38.0
65
052605A
5 - M50
M50
2”
110
37
80
38.0-44.5
65
052666A
6 - M63s
M63
2½
120
45
100
44.5-50.0
85
052606A
6 - M63
M63
2½
120
48
100
50.0-56.0
Gland
Code
Size
052600A
0526-0A
Max Dia
Over Cores
Max No. of
Cores
Overall Cable
Dia ( Min-Max)
Hexagonal
Across
Flats
85
Technical Data
Type
BARRIER TEX F
Seal Material Thermoplastic Elastomer (Outer Seal)
Cable Type
Unarmoured
Sealing Area
Accessories
earth tag & shroud
IEC
Extd, A21
CENELEC / ATEX
EN60079-0:2006
EN60079-1:2004
EN60079-7:2003
EN61241-0:2006
EN61241-1:2004
SIRA 09ATEX1044X
7
Tel
+44 (0) 1226 352 000
www.remora.net
Mining Glands
CROCLOCK CR-CB
Remora
Electrical Ltd
CROCLOCK CR-CB Exd I/IIC, Exe II, I M2/II 2GD Cable Gland
The CROCLOCK CR-CB type gland provides a Flameproof EExd compound filled barrier, a seal on the outer sheath, a universal
armour clamp for armoured, screened or braided cable and an entry thread seal. The armour clamp provides an eletrical bond between
the cable armour, screen or braid and the gland. CROCLOCK CR-CB type glands maintain EExd Flameproof method of explosion
protection; IP66, 68 to 100 meters and is deluge resistant.
Entry Thread
Gland Seal Range
Cable Inner Sheath/Cores
Gland Code
Metric
NPT
Entry
Length
Max No.
Cores
Max
Over
Cores
Max
Inner
Sheath
Cable Outer Sheath
Standard
Min
Max
Reduced Bore
Min
Max
Armour
Acceptance
Range
CR-CB/16/M16
M16
½ or ¾
16
7
9.0
11.7
9.0
13.5
6.7
10.3
0.15 - 1.25
CR-CB/20S/M20
M20s
½ or ¾
16
8
10.4
11.7
11.5
16.0
9.4
12.5
0.15 - 1.25
CR-CB/20/M20
M20
½ or ¾
16
14
12.5
14.0
15.5
21.1
12.0
17.6
0.15 - 1.25
CR-CB/25/M25
M25
¾ or 1
16
25
17.8
20.0
20.3
27.4
16.8
23.9
0.15 - 1.60
CR-CB/32/M32
M32
1 or 1¼
16
50
23.5
26.3
26.7
34.0
23.2
30.5
0.15 - 2.00
CR-CB/40/M40
M40
1¼ or 1½
16
80
28.8
32.2
33.0
40.6
28.6
36.2
0.20 - 2.00
CR-CB/50S/M50
M50s
2
16
100
34.2
38.2
39.4
46.7
34.8
42.4
0.20 - 2.50
CR-CB/50/M50
M50
2
16
100
39.4
44.1
45.7
53.2
41.1
48.5
0.20 - 2.50
CR-CB/63S/M63
M63s
2½
19
120
44.8
50.1
52.1
59.5
47.5
54.8
0.30 - 2.50
CR-CB/63/M63
M63
2½
19
120
50.0
56.0
58.4
65.8
53.8
61.2
0.30 - 2.50
CR-CB/75S/M75
M75s
3
19
140
55.4
62.0
64.8
72.2
60.2
68.0
0.30 - 2.50
CR-CB/75/M75
M75
3
19
140
60.8
68.0
71.1
78.0
66.5
73.4
0.30 - 2.50
CR-CB/80/M80
M80
3 or 3½
25
160
64.4
72.0
77.0
84.0
-
-
0.45 - 3.15
CR-CB/85/M85
M85
3 or 3½
25
180
69.8
78.0
79.6
90.0
75.0
85.4
0.45 - 3.15
CR-CB/90/M90
M90
3½ or 4
25
200
75.1
84.0
88.0
96.0
-
-
0.45 - 3.15
CR-CB/100/M100
M100
3½ or 4
25
220
80.5
90.0
92.0
102.0
87.4
97.4
0.45 - 3.15
• Glands available in both brass self colour & brass nickel plated.
• Gland can be used on Exd enclosures greater than 2 liters volume.
Technical Data
CROCLOCK CR-CB
Type
Seal Material LSOH Silicone
Sealing Area
Accessories
earth tag & shroud
SIRA 03ATEX1479X
Gas Group I, IIC, IIB, IIA
CENELEC / ATEX
Mining equipment Group I M2
EN50014:1998
Enclosure Volume - Any
EN50018:2000
Internal Ignition Source - Yes
EN50281-1-1:1999E
Zone 1 or 2, 21 & 22
IEC 60079-0 (2006-06)
IEC 60079-1 (2001-02)
Alternative Certification Options Available:• Gost • CSA • IECEx
[email protected]
Fax
+44 (0)1226 360 510
8
Mining Glands
CROCLOCK CR-UB
Remora
Electrical Ltd
CROCLOCK CR-UB Exd I/IIC, Exe II, I M2/II 2GD Cable Gland
The CROCLOCK CR-UB type gland provides a Flameproof EExd compound filled barrier, a secondary weather seal on the outer
sheath and an entry thread seal. CROCLOCK CR-UB type glands maintain Flameproof EExd integrity on unarmoured cable types
and IP protection to IP66, 68 to 100 meters and is deluge resistant.
Entry Thread
Gland Seal Range
Cable Inner Sheath/Cores
Gland Code
Metric
NPT ‘C’
Entry
Length
Max No.
Cores
Max Over
Cores
Max Inner
Sheath
Cable Outer Sheath
Standard
Min
Max
CR-UB/16/M16
M16
½ or ¾
16
7
8.4
8.4
3.4
8.4
CR-UB/20S/M20
M20s
½ or ¾
16
8
10.4
11.7
4.8
11.7
CR-UB/20/M20
M20
½ or ¾
16
14
12.5
14.0
9.5
14.0
CR-UB/25/M25
M25
¾ or 1
16
25
17.8
20.0
11.7
20.0
CR-UB/32/M32
M32
1 or 1¼
16
50
23.5
26.3
18.1
26.3
CR-UB/40/M40
M40
1¼ or 1½
16
80
28.8
32.2
22.6
32.2
CR-UB/50S/M50
M50s
2
16
100
34.2
38.2
28.2
38.2
CR-UB/50/M50
M50
2
16
100
39.4
44.1
33.1
33.1
CR-UB/63S/M63
M63s
2½
19
120
44.8
50.1
39.3
50.1
CR-UB/63/M63
M63
2½
19
120
50.0
56.0
46.7
56.0
CR-UB/75S/M75
M75s
3
19
140
55.4
62.0
52.3
62.0
CR-UB/75/M75
M75
3
19
140
60.8
68.0
58.0
68.0
CR-UB/80/M80
M80
3 or 3½
25
160
64.4
72.0
61.9
72.0
CR-UB/85/M85
M85
3 or 3½
25
180
69.8
78.0
69.1
78.0
CR-UB/90/M90
M90
3½ or 4
25
200
75.1
84.0
74.1
84.0
CR-UB/100/M100
M100
3½ or 4
25
220
80.5
90.0
81.8
90.0
• Glands available in both brass self colour & brass nickel plated.
• Gland can be used on Exd enclosures greater than 2 liters volume.
Technical Data
Type
CROCLOCK CR-UB
Seal Material LSOH Silicone
Cable Type Unarmoured
Sealing Area
Accessories
earth tag & shroud
SIRA 03ATEX1479X
Gas Group I, IIC, IIB, IIA
CENELEC / ATEX
Mining equipment Group I M2
EN50014:1998
Enclosure Volume - Any
EN50018:2000
Zone 1 or 2, 21 & 22
EN50281-1-1:1999E
IEC 60079-0 (2006-06)
IEC 60079-1 (2001-02)
Alternative Certification Options Available:• Gost • CSA • IECEx
9
Tel
+44 (0) 1226 352 000
www.remora.net
Spigot Adaptor/
Reducers HAS
Remora
Electrical Ltd
SPIGOT HAS IM2 Ex d I/II 2G Ex d IIB Adaptor/Reducers
The HAS Type Spigot Adaptor/Reducers are intended for mounting to flameproof enclosure without compromising
the explosion protection provided by the enclosure, in accordance with relevant codes of practice. The enclosure has
minimum spigot bore length of 12.5mm. The Adaptor/Reducers are designed to convert the aperture of the associated
enclosure into a metric female thread form. The Adaptor consists of an elliptical metallic plate that has a female metric
thread form at one end for the connection of Group 1 certified cable glands, at the other end there is a turned cylindrical
spigot for insertion into the associated equipment spigot bore. The elliptical portion of the Adaptor has two, counter bored
fixing holes for use with cap head screws to secure the Adaptor to the enclosure. Armortex, FLP, FLP-TR & FLP Hose
range of cable glands can be used in conjunction with the HAS Adaptor/Reducers.
Metric Thread Sizes Available ‘*’
Dimension
Spigot Code
‘A’ Spigot
Size
‘B’
‘C’
M20
M25
M32
M40
M50
M63
Fixing
Size
HAS0 / *
19.05
14.0
44.5
Y
-
-
-
-
-
M6
HAS1 / *
25.4
20.0
57.15
Y
Y
Y
-
-
-
M6
HAS2 / *
31.75
26.3
69.85
Y
Y
Y
-
-
-
M8
HAS3 / *
38.1
32.2
82.55
Y
Y
Y
Y
-
-
M8
HAS4 / *
50.8
44.1
95.25
Y
Y
Y
Y
Y
-
M10
HAS5 / *
63.5
56.0
114.3
Y
Y
Y
Y
Y
Y
M10
Note: * is replaced by the applicable spigot & required thread size: e.g. HAS1 / 25.4 / M32
The HAS Spigot Adaptors are available without thread entries, thus becoming blanking devices, the thread size ‘*’ is just
omitted from the part code. e.g. HAS1 / 25.4
Technical Data
Type
HAS
Material
Brass Bright Zinc plated Gold
Passivation.
CE
IM2 Ex d I / II 2G Ex d IIB
Sira 06ATEX1149U
[email protected]
Fax
+44 (0)1226 360 510
10
Motor/Switchgear
Reducer Plate HAP1
Remora
Electrical Ltd
Reducer Plate HAP1 IM2 Ex d I/II 2G Ex d IIB
The HAP Reducer Plate is intended for mounting to a flameproof enclosure without compromising the explosion
protection provided by the motor/switchgear/enclosure. The HAP Reducer is used to convert an existing cable entry
aperture of the associated enclosure into a metric female thread form. The Reducer comprises a rectangular metallic
plate with four, counter-bored, fixing holes for used with cap head screws. One recessed or fully threaded bore for the
connection of a suitable certified cable gland is centrally located. Armortex, FLP, FLP-TR & FLP Hose range of cable
glands can be used in conjunction with the HAP Reducer Plate.
Plate Code
HAP1 / *
Dimension
‘A’
‘B’
‘C’
‘D’
M25
M32
62
100
32
70
Y
Y
-
-
-
Fixing
Size
-
M6
Note: * is replaced by the applicable thread size: e.g. HAP1 / M32
The HAP Reducers are available without thread female entries, thus becoming blanking
devices, the thread size ‘*’ is just omitted from the part code.
Technical Data
Type
HAP1
Material
Mild Steel Bright Zinc plated Gold
Passivation.
CE
Sira 06ATEX1149U
11
Tel
+44 (0) 1226 352 000
www.remora.net
Motor/Switchgear
Reducer Plate HAP2
Remora
Electrical Ltd
connection of a suitable certified cable gland is centrally located. Armortex, FLP, FLP-TR & FLP Hose range of cable
Plate Code
HAP2 / *
Dimension
‘A’
‘B’
‘C’
‘D’
M25
M32
M40
M50
95
142
65
112
Y
Y
Y
Y
M63
M75
Fixing
Size
Y
Y
M8
Technical Data
Type
HAP2
Material
Passivation.
CE
Sira 06ATEX1149U
[email protected]
Fax
+44 (0)1226 360 510
12
Motor/Switchgear
Reducer Plate HAP3
Remora
Electrical Ltd
connection of a suitable certified cable gland is centrally located.Armortex, FLP, FLP-TR & FLP Hose range of cable
Plate Code
HAP3 / *
Dimension
‘A’
‘B’
‘C’
‘D’
M25
M32
M40
M50
120
147
85
112
Y
Y
Y
Y
M63
M75
Fixing
Size
Y
Y
M10
Technical Data
Type
HAP3
Material
Passivation.
CE
Sira 06ATEX1149U
13
Tel
+44 (0) 1226 352 000
www.remora.net
Motor/Switchgear
Reducer Plate HAP4
Remora
Electrical Ltd
Plate Code
HAP4 / *
Dimension
‘A’
‘B’
‘C’
‘D’
M25
M32
M40
M50
100
100
57
76
Y
Y
Y
Y
M63
M75
Fixing
Size
Y
-
M10
Technical Data
Type
HAP4
Material
Passivation.
CE
Sira 06ATEX1149U
[email protected]
Fax
+44 (0)1226 360 510
14
Motor/Switchgear
Reducer Plate HAP5
Remora
Electrical Ltd
Plate Code
HAP5 / *
Dimension
‘A’
‘B’
‘C’
‘D’
M25
M32
M40
M50
118
168
83
133
Y
Y
Y
Y
M63
M75
M80
M85
Fixing
Size
Y
Y
Y
Y
M12
Technical Data
Type
HAP5
Material
Passivation.
CE
Sira 06ATEX1149U
15
Tel
+44 (0) 1226 352 000
www.remora.net
Motor/Switchgear
Salvage Plate
Remora
Electrical Ltd
Salvage Plate MSP NON-FLP
The HAP Salvage Plate is designed for the protection of motors and switchgear in storage, transite or salvage operations.
The plate is fitted using the supplied silicone protection lubricant and uses the original cable entry fixing studs. the fitting
of the plate offers protection to the flameproof surfaces and provents ingress of dust and water to the equipment.
Plate Code
MSP1
Dimension
‘A’
‘B’
‘C’
‘D’
Fixing
Size
62
100
32
70
M6
MSP2
95
142
65
112
M8
MSP3
120
147
85
112
M10
MSP4
100
100
57
76
M10
MSP5
118
168
83
133
M12
Technical Data
Type
MSP
Material
Nylon 6
[email protected]
For industrial None-FLP use only
Fax
+44 (0)1226 360 510
16
Reducers/Adaptors
& Stopping Plugs
Remora
Electrical Ltd
Metric-Metric Reducers/Adaptors & Stopping Plugs EExde I/IIC
Metric Reducers & Adaptors are designed to effectively reduce or adapt dissimilar thread sizes. Manufactured from
high quality brass, suitable for Zone 1 & 2 Hazardous area installations EExde Group I (mining) & Group II (surface).
High IP protection obtained to IP66/67/68 when fitted with sealing gasket provided.
Reducer
Male
Thread
Female
Male
Thread
Length
Adaptor
Reducer
Code
Male
Male
Thread
Length
Adaptor
Code
M20
M16
15
RM20M16E-UN
M16
M20
15
AM16M20E-UN
M25
M20
15
RM25M20E-UN
M20
M25
15
AM20M25E-UN
M32
M20
15
RM32M20E-UN
M25
M32
15
AM25M32E-UN
M32
M25
15
RM32M25E-UN
M32
M40
15
AM32M40E-UN
M40
M20
15
RM40M20E-UN
M40
M50
15
AM40M50E-UN
M40
M25
15
RM40M25E-UN
M50
M63
15
AM50M63E-UN
M40
M32
15
RM40M32E-UN
M63
M75
15
AM63M75E-UN
M50
M20
15
RM50M20E-UN
M50
M25
15
RM50M25E-UN
M50
M32
15
RM50M32E-UN
M50
M40
15
RM50M40E-UN
M63
M32
15
RM63M32E-UN
M63
M40
15
RM63M40E-UN
M63
M50
15
RM63M50E-UN
M75
M63
15
RM75M63E-UN
SANS / SABS IEC
and DIP
CENELEC / ATEX
I M2
EN50014:1997E
EN50018:2000E
EN50019:2000E
EN50281-1-1:1999E
17
Thread
Female
Thread
Size
Male
Thread
Length
Stopper
Code
M16
15
353016-UN
M20
15
353020-UN
M25
15
353025-UN
M32
15
353032-UN
M40
15
353040-UN
M50
15
353050-UN
M63
15
353063-UN
M75
15
353075-UN
• Chinese
Tel
Stopping Plug
+44 (0) 1226 352 000
www.remora.net
Industrial Glands
A2
Remora
Electrical Ltd
A2 Compression Cable Gland
The A2 Compression Gland is designed for use with unarmoured, elastomeric and plastic cable for both indoor & outdoor applications. Seals on the cable sheath, to IP68 if fitted with a sealing gasket.
Entry Thread
Max Length
‘C’
Hexagonal
Details (max)
Gland
Code
Size
Diameter ‘N’
Length ‘D’
Min-Max ‘A’
‘Flats’
‘Crns’
053500
00 - M20ss
M20
10
3.0 - 8.0
20
24
27
0535-0
0 - M20s
M20
10
7.0 - 11.0
20
24
27
053501
1 - M20
M20
10
11.0 - 15.5
24
27
31
053502
2 - M25
M25
10
15.0 - 20.5
25
35
40
053503
3 - M32
M32
10
20.0 - 26.5
30
42
48
053504
4 - M40
M40
10
26.0 - 34.5
30
52
60
053505
5 - M50
M50
10
34.0 - 44.5
42
65
75
053506
6 - M63
M63
10
44.0 - 57.0
48
82
94
053507
7 - M75
M75
20
56.0 - 68.0
55
96
110
053508
8 - M80
M80
20
65.0 - 74.0
55
96
110
053509
9 - M90
M90
20
73.0 - 82.0
60
110
125
053510
10 - M100
M100
20
81.0 - 92.0
70
*
*
053511
11 - M110
M110
20
91.0 - 102.0
70
*
*
053512
12 - M120
M120
20
102.0 - 110.0
*
*
*
053513
13 - M130
M130
20
110.0 - 120.0
*
*
*
Note: Sizes M110 to M130 are of round slotted material, for use with ‘C’ spanner. Please contact us for dimentions
• For indoor / outdoor use.
• Seals on cable sheath to IP68.
• Wide sealing range.
• Precision manufactured from high quality Nickel plated brass.
Technical Data
Type
A2
Gland Material Brass (Nickel Plated)
Seal Material Thermoplastic Elastomer (Silicone on
request)
Cable Type
Unarmoured
Sealing Area
Outer sheath
Accessories
Reducer/adaptor, lock nut & shroud
[email protected]
BS6121 Part 1 1989
SGS 1542\97153
SANS / SABS 1213
787\80054\D586
IP Protection
IP66/68
EN50014:1997E
Fax
-30 °C to +130 °C
+44 (0)1226 360 510
18
Industrial Glands
CW
Remora
Electrical Ltd
CW Captive Cone Gland
The CW Gland is designed for Steel Wire Armoured cables for general indoor/outdoor use where a seal on the outer
sheath is required to obtain an IP rating. The gland features two piece handling, no loose parts & freely rotating captive
cone, providing an armour clamp and earth bond without twisting the steel wire armouring. Seals on the cable sheath,
to IP66 if fitted with a sealing gasket.
Entry Thread
Gland
Code
Size
051200
00 - M20ss
M20
10
3.0 - 8.0
8.0 - 13.5
0512-0
0 - M20s
M20
10
8.0 - 12.0
11.5 - 16.0
Diameter ‘N’
Length ‘D’
Min-Max ‘A’
Min-Max ‘B’
Max Length
‘E’
Hexagonal
Details (max)
‘Flats’
‘Crns’
41
24
27
43
24
27
051201
1 - M20
M20
10
11.0 - 15.5
14.5 - 21.0
47
27
31
051202
2 - M25
M25
10
15.0 - 20.5
20.5 - 27.0
56
35
40
051203
3 - M32
M32
10
20.0 - 26.5
26.5 - 33.5
57
42
48
051204
4 - M40
M40
15
26.0 - 34.5
33.0 - 43.0
68
52
60
051205
5 - M50
M50
15
34.0 - 44.5
42.5 - 52.5
72
65
75
051206
6 - M63
M63
15
44.0 - 57.0
52.0 - 65.5
89
80
90
051207
7 - M75
M75
15
56.0 - 68.0
65.0 - 78.0
97
96
110
051208
8 - M80
M80
20
68.0 - 74.0
77.5 - 82.0
98
100
115
051209
9 - M90
M90
20
74.0 - 82.0
81.0 - 91.0
123
110
125
051210
10 - M100
M100
20
82.0 - 93.0
90.0 - 101.0
*
*
*
Note: Sizes M100 and above are of round slotted material, for use with ‘C’ spanner. Please contact us for dimentions
• For outdoor use.
• Freely rotating captive cone, providing an armour clamp and earth bond without twisting the steel wire armouring.
• Provides a seal on the outer sheath of the cable to IP66.
• Precision manufactured from high quality Nickel plated brass.
Technical Data
Type
CW
Gland Material Brass (Nickel Plated)
Cable Type
Steel Wire Armour / Aluminium Armour
Armour Clamping Captive Rotating Cone
Sealing Area
Outer sheath
Accessories
Reducer/adaptor, lock nut, earth tag &
shroud
19
Tel
BS6121 Part 1 1989
SGS 3641\99369
SANS / SABS 1213
787\K757
IP Protection
IP66
EN50014:1997E
+44 (0) 1226 352 000
-30 °C to +130 °C
www.remora.net
Industrial Glands
IP Corrosion Guard
Remora
Electrical Ltd
IP Plus Corrosion Guard Cable Gland
The IP Plus Corrosion Guard Gland is designed for use with Steel Wire Armoured (SWA) cable. It provides an IP68
moisture proof seal on the outer sheath of the cable making the gland suitable for use in highly corrosive and wet locations. The screw-on Corrosion Guard is manufactured from non-corrosive material to protect the steel wire armour and
metal parts of the gland.
Gland
Code
Size
054600
0546-0
Entry Thread
Max Length
‘E’
Maximum
Diameter ‘F’
8.0 - 13.5
53
35
11.5 - 16.0
53
35
14.5 - 21.0
56
36
14.0 - 20.5
20.5 - 27.0
60
46
19.0 - 26.5
26.5 - 33.5
66
53
15
26.0 - 34.5
33.0 - 43.0
78
68
M50
15
34.0 - 44.5
42.5 - 52.5
87
84
M63
15
44.0 - 57.0
52.0 - 65.5
110
110
M75
15
56.0 - 68.0
65.0 - 78.0
118
124
Diameter ‘N’
Length ‘D’
Min-Max ‘A’
00 - M20ss
M20
10
3.0 - 8.0
0 - M20s
M20
10
7.0 - 12.0
054601
1 - M20
M20
10
9.0 - 15.5
054602
2 - M25
M25
10
054603
3 - M32
M32
10
054604
4 - M40
M40
054605
5 - M50
054606
6 - M63
054607
7 - M75
Min-Max ‘B’
• For use in highly corrosive or wet locations.
• Specially formulated IP Plus seals, seals on inner sheath of the cable.
• The screw-on Corrosion Guard is manufactured from non-corrosion material to protect the steel wire armour and metal part of
the gland.
• Corrosion Guard screws onto the gland body and seals over the outer sheath of the cable giving an IP 66/67/68 seal.
• Wide sealing range.
• Precision manufactured from high quality Nickel plated brass & non-corrosive Glass Reinforced Polyester Compound corrosion
guard.
Technical Data
Type
BW Corrosion Guard
Gland Material
Brass (Nickel Plated)
Corrosion Guard Glass Reinforced Polyester Compound /
PBT
Cable Type
Steel Wire Armour
Outer sheath and total enclosure of gland
Sealing Area
Accessories
Reducer/adaptor, lock nut & earth tag.
[email protected]
Fax
BS6121 Part 1 1989
SGS 3641\99367
SANS / SABS 1213
787\85772K756
IP Protection
IP66/68
EN50014:1997E
-30 °C to +130 °C
+44 (0)1226 360 510
20
Junction Boxes
Remora
Electrical Ltd
Utility Box IP68
The Utility Box is a general purpose junction box suitable for all surface applications. It is manufactured from impact, corrosion and
UV resistant glass reinforced polyester compound and provides 1,2,3 or 4 way versatility. Srew on lid provides ease of installation and
when locked with the special locking key prvents unauthories tampering.
4 WAY
Material:
IP Ratings:
Standard:
UV Resistant Glass Reinforced Polyester Compound
IP66/67/68
SABS 2333 / IEC 600529
Box Code
Gland Size
Entry Thread
‘A’
Clear Inside
Height ‘B’
Clear Inside
Distance ‘C’
Distance of Fixing Holes ‘D’
Earth Rail Fixing
Holes ‘E’
102101
1 - M20
M20x1.5
49
80
122
75
102102
2 - M25
M25x1.5
53
110
158
86
• Connection box for industrial applications.
• Manufactured from impact corrosion and UV resistant glass reinforced polyester compound.
• Screw on lid provides ease of installation locked with a special locking key prevents unauthorised tampering and ease of
installation.
• No exposed metal parts.
• Dust and water proof to IP68.
• One box offers 1, 2, 3 or 4 way versatility
• 4 blanking plugs provided.
• No drilling or tapping of cable entries required.
• Internal earth continuity ring and earth stud provided.
• Mounting studs provided for DIN rail if using terminal blocks.
Junction Box Accessories
Terminal assemblies
are available supplied
& fitted ready for
installation. Full terminal
option list is available on
request.
21
Anti-tamper special
locking key - prevents
unauthorised entry
Tel
+44 (0) 1226 352 000
www.remora.net
Junction Boxes
Remora
Electrical Ltd
Handi-Fit Box IP68
The Handifit Box is a general purpose junction box suitable for all surface applications. It is manufactured from impact, corrosion and
UV resistant glass reinforced polyester compound and provides 1,2,3 or 4 way versatility. Srew on lid provides ease of installation and
when locked with the special locking key prvents unauthories tampering.
Y BOX
4 WAY
Material:
IP Ratings:
Standard:
UV Resistant Glass Reinforced Polyester Compound
IP66/67/68
SABS 2333 / IEC 600529
Box Code
Gland Size
Entry Thread
‘A’
Clear Inside
Height ‘B’
Clear Inside
Distance ‘C’
Earth Rail Fixing
Holes ‘E’
0650-0
0 - M20s
M20x1.5
52
71
77
65
065001
1 - M20
M20x1.5
58
89
90
80
065002
2 - M25
M25x1.5
67
107
107
98
065003
3 - M32
M32x1.5
105
165
167
140
Box Code
Gland Size
Entry Thread
‘A’
Clear Inside
Height ‘B’
Clear Inside
Distance ‘C’
Earth Rail Fixing
Holes ‘E’
0651-0
0 - M20s
M20x1.5
52
61
107
65
065101
1 - M20
M20x1.5
58
81
127
80
065102
2 - M25
M25x1.5
67
91
150
98
065103
3 - M32
M32x1.5
105
152
235
140
• Connection box for industrial applications.
• Manufactured from impact corrosion and UV resistant glass reinforced polyester compound.
• Screw on lid provides ease of installation locked with a special locking key prevents unauthorised tampering and ease of
installation.
• No exposed metal parts.
• Dust and water proof to IP68.
• One box offers 1, 2, 3 or 4 way versatility
• 4 blanking plugs provided.
• No drilling or tapping of cable entries required.
• Internal earth continuity ring and earth stud provided.
• Mounting studs provided for DIN rail if using terminal blocks.
[email protected]
Fax
+44 (0)1226 360 510
22
Cable Gland
Accessories
Remora
Electrical Ltd
Brass Lock Nuts
Brass Earth Tags
Size
Nickel Plated
Code
Unplated
Code
Size
Nickel Plated
Code
Unplated
Code
16 - M16
BLN16
UBLN16
16 - M16
NPET16
ET16
1 - M20
BLN1
UBLN1
1 - M20
NPET1
ET1
2 - M25
BLN2
UBLN2
2 - M25
NPET2
ET2
3 - M32
BLN3
UBLN3
3 - M32
NPET3
ET3
4 - M40
BLN4
UBLN4
4 - M40
NPET4
ET4
5 - M50
BLN5
UBLN5
5 - M50
NPET5
ET5
6 - M63
BLN6
UBLN6
6 - M63
NPET6
ET6
7- M75
BLN7
UBLN7
7- M75
NPET7
ET7
Plastic Sealing Washers
Serrated Washers BZP
Size
Washer Code
Size
Washer Code
16 - M16
805516
16 - M16
M16WSER
1 - M20
805520
1 - M20
M20WSER
2 - M25
805525
2 - M25
M25WSER
3 - M32
805532
3 - M32
M32WSER
4 - M40
805540
4 - M40
M40WSER
5 - M50
805550
5 - M50
M50WSER
6 - M63
805563
6 - M63
M63WSER
7- M75
805575
7- M75
M75WSER
PVC Gland Shrouds
23
Gland Spanners
Size
Shroud Code
Size
Shroud Code
0 - M20s (Long Body)
SR0
0 - M20s
SPANNER-20S
0 - M20s (Short Body)
SF0
1 - M20
SPANNER-20
1 - M20
SF1
2 - M25
SPANNER-25
2 - M25
SF2
3 - M32
SPANNER-32
3 - M32
SF3
4 - M40
SPANNER-40
4 - M40
SF4
5 - M50
SPANNER-50
5 - M50
SF5
6 - M63
SPANNER-63
6 - M63
SF6
7- M75
SPANNER-75
7- M75
SF7
Tel
+44 (0) 1226 352 000
www.remora.net
Remora
Notes
Electrical Ltd
[email protected]
Fax
+44 (0)1226 360 510
24
Unit 8a Shortwood Business
Park Hoyland S74 9LH
Tel: +44 (0) 1226 352 000
Fax: +44 (0) 1226 360 510
email: [email protected]
www.remora.net
ISSUE NO: MC#0.16

Cable Gland Selection

Transcription

Similar documents

- Included with Park Millennium Cable TV Package

silly cable tech terms

SWA`s revolutionary SmartFit Glands SWA`s revolutionary SmartFit

linbeck group architect: hahnfeld hoffer stanford

www.vecsupply.com

View - Prince George Digitization

REMOTELYNC™ LOCKING STOR-A-KEY™ by PORTABLE STOR

phyBOARD-Subra-i.MX6 1) QuickStart Guide

Motorola SURFboard SB5101 Quick Start Guide

Swecomex - Global Marine Systems