Synergy Triple Assembly

SYNERGY
RACK MOUNT
KIT TO ACCOMMODATE DOOR
1x 5/32” Hex Key - (400-080)
1x
300-520
300-518
OPTION: INSTALLING GEAR FORWARD
Rack rails may also be installed with the flange forward in
applications the door is not desired and additional cabinet
1/8” Hex Key - (400-070)
depth is needed.
A.
Place the 1/2” Button Head Screw (300-485) in the
holes of rack mount rail and hinge bracket and loosely
screw to Flat-nut (300-560).
Note: Rackmount brackets that have a triangle
must locate at the top.
B.
Slide Rack Mount Rail into position with the Flat Nuts
sliding into the channel as shown. After bracket is in
position tighten all screws with hex key.
12x
(300-485)
1/2” Button Head
Screw
2x
(301-360)
Mounting Screw
8x
(300-560) - Flat Nut
Limited Warranty
For five full years Salamander Designs Ltd. will repair or
replace, at our option, any product defective in materials
or craftsmanship. Salamander Designs Ltd. will not be
responsible for any damage to or destruction of other
equipment consequential to our equipment failure. Defective
product must be given Return Authorization and is to be
returned to the factory prepaid, in the original carton and
packing material. Any damage incurred in a shipment not
in original packaging shall be the responsibility of the owner.
Warranty repairs will be returned prepaid, via UPS within
the continental U.S.A. only.
www.SalamanderDesigns.com
800-535-5659
Doc No. 500-455 / v11.10 ©2010 Salamander Designs Ltd.
C.
Snap door onto hinge bases align top and
bottom gap and tighten.
For 15 and 21U rails:
D.
Install header panel at the top same
location of rack mount.
SYNERGY
RACK MOUNT
1x 5/32” Hex Key - (400-080)
1x
OPTION: INSTALLING GEAR FORWARD
Rack rails may also be installed with the flange forward in applications the door is not
desired and additional cabinet depth is needed.
A For Installing in Synergy Cabinets:
1/8” Hex Key - (400-070)
B
Place the 1/2” Button Head Screw (300-485) in the holes of each bracket and attach loosely
with Flat Nut. Note: For assembled cabinets use the Drop-In Nut in place of the Flat Nut.
For Installing in Chameleon Cabinets:
Use the Drop-In Nuts (300-565) and the shorter 3/8” Button Head Screws (300-518).
Insert Flat Nut s or Drop-In Nuts into the channels (Use the Front Side Channel for
Chameleon). Secure screws with Hex Key.
C Use standard 10-32 mounting screws to mount equipment on rack rails.
D For 15U & 21U Rails, attach header panel at the top of the rack rail.
6x
300-565 >
or
300-560 >
< 300-485 or
300-518
(300-518)
3/8” Button Head
Screw
8x
12 x
(300-485)
1/2” Button Head
Screw
(301-360)
Mounting Screw
8x
4x
Note: Use the front
side channel for
Chameleon Cabinets
(300-560) - Flat Nut
CABINET
FRONT
(300-565)
Drop-In Nut
Limited Warranty
For five full years Salamander Designs Ltd. will repair or
replace, at our option, any product defective in materials
or craftsmanship. Salamander Designs Ltd. will not be
responsible for any damage to or destruction of other
NOTES
Installing Gear Forward
For Small Segment Use Behind Door
Rack rails may also be installed with the
flange forward in applications the door is
not desired and additional cabinet depth is
needed.
Install brackets away from door hinges.
equipment consequential to our equipment failure. Defective
product must be given Return Authorization and is to be
returned to the factory prepaid, in the original carton and
packing material. Any damage incurred in a shipment not
in original packaging shall be the responsibility of the owner.
Warranty repairs will be returned prepaid, via UPS within
the continental U.S.A. only.
www.SalamanderDesigns.com
800-535-5659
Doc No. 500-455 / v11.10 ©2010 Salamander Designs Ltd.
FRONT
SYNERGY TRIPLE UNIT - SL20 / SL30 / SL40
!
WARNING: If you are installing accessories such as doors or drawers to the base unit,
read all instructions for the accessory and install in conjunction with these instructions.
CONNECTOR BOLTS
ALUMINUM POSTS
TOP SHELF
(A) SHELF PEGS
BOTTOM SHELF
(B)
ADJUSTABLE SHELVES
WASHER
HEX NUT
LEVELER FOOT
* Diagram: Synergy 30 Triple Unit
Doc No. 500-780 v6.05
TRIPLE - 1 of 4
Parts
1x (400-060) - 3/16” Hex Key
8 - Aluminum Posts
Adjustable Shelf (SL20 -3) • (SL30 - 6)
1 - Top Shelf
1 - Spacer Tool
8x
1 - Bottom Shelf
3 - Rear Panels
8x
1x
(400-035) - Wrench
Rear Panel Bags - PHK-240
8x
1x
(400-070) - 1/8” Hex Key
12x
(300-540)
Connector Bolt
(300-470)
Washer
(300-510) - Stud
12x
12x
(P-300-320) - Leveler Foot
1x
(300-560) - Flat Nut
(300-530) - ThumbNut
(PHK-380)
Shelf Peg “A”
SL20 - 6x
SL30 - 12x
(PHK-370)
Shelf Peg “B”
SL20 -6x
SL30 -12x
(P-400-040) - Level
Limited Warranty
For five full years Salamander Designs Ltd. will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any
damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the
original carton and packing material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via
UPS within the continental U.S.A. only.
Salamander Designs Ltd. 800-535-5659
©2003 Salamander Designs Ltd.
® Synergy System - U.S.A. Patented.
www.SalamanderDesigns.com
Doc No. 500-780 v6.05
TRIPLE - 2 of 4
1 Connect Posts to Bottom Shelf
!
2 Add Shelf Pegs
!
WARNING: Tighten by screwing the leveler foot NOT the post.
A. Square Post
B. Connect Post
Square the post to the bottom shelf.
Screw foot with metal washer through
bottom shelf and onto the end of an
extruded post. Hand tighten fully then
use wrench on hex nut to tighten
nut onto underside of shelf.
O
90
WARNING: If you are installing an optional door or drawer refer
to specific instructions before proceeding.
A.
Insert all shelf pegs down each post.
B.
Washer
Gently tighten pegs with the
hex key to desired position.
Hex Nut
Foot
A
B
A
B
Doc No. 500-780 v6.05
TRIPLE - 3 of 4
3 Adjust Shelf Pegs & Add Shelves
EX
R EA
ED
N D EL
TEP A N
R
3
4
40
/ S EL
0 AN
S3 R P
R EA
Combine the 1” threaded
studs with the flat nuts. Slide
hardware into rear posts.
2
5
2X
4X
4X
2X
1
2
3
www.salamanderdesigns.com
EXTENDED
REAR PANEL
Use the Spacer Tool to align
top and bottom studs.
S20 / SVDO
REAR PANEL
SPACER
TOOL
1
Insert peg down the post channel
and position the peg through the
Spacer and tighten. You may also
consider using books or CD's for
shelf spacing.
A. Insert & Align Studs
www.salamanderdesigns.com
Adjusting Shelves
8
O
VD
/ S EL
0 AN
S2 R P
R EA
A.
4 Attach Rear Panel & Top Shelf
S30 / S40
REAR PANEL
4
5
4 1/2 "
6
7
8"
9
8
TOOL
6
7
8
TOOL
SPACER
9
6"
SPACER
7
6"
5
6
4 1/ 2 "
4
5
3
1
EXTENDED
REAR PANEL
2
S20 / SVDO
REAR PANEL
EXTENDED
REAR PANEL
1
3
2
S20 / SVDO
REAR PANEL
www.salamanderdesigns.com
S30 / S40
REAR PANEL
www.salamanderdesigns.com
4
S30 / S40
REAR PANEL
REAR
300-540
Insert the top 8 connector
bolts and tighten down top shelf.
8
TOOL
SPACER
9
8"
6
7
6"
4
5
4 1/2 "
2
3
S30 / S40
REAR PANEL
S20 / SVDO
REAR PANEL
EXTENDED
REAR PANEL
1
Place shelves from the bottom up.
Angle the shelf in between the
front post and set on top of shelf
pegs and heavy duty brackets.
8"
8"
4 1/ 2 "
www.salamanderdesigns.com
B. Placing Shelf
6"
9
Before enclosing the unit with
the top shelf install side panels
(if applicable).
See Side Panel Instructions
B. Install Top
8
TOOL
SPACER
Side Panels
C. Secure Rear Panel
Place panels and secure thumb nuts
to finish rear panel installation.
* Use holes to guide the studs..
C. Fine Tuning
Use the bubble level to precisely
adjust the shelves. Be sure to level both
side to side as well as front to back.
Use the hex key to tighten each peg.
TIP
To ease installation of rear panels
first remove any drawers and/or
doors and gently place the unit face
down on the floor to improve
aligning of panels.
Doc No. 500-780 v6.05
TRIPLE - 4 of 4