KOMPASS bevel gearboxes

Transcription

R
Gear Box
R
Bevel gear boxes
■Standard Specifications (Compass)
Type
K Type
KN Type
Frame Number
04, 06, 08
10, 15, 20
Reduction Ratio
1：1
Grease Lubrication
(Applied to gear tooth)
Grease Lubrication
Oil Lubrication
Resin
Aluminium Die-Casting
Cast Iron
Reduction Method
Structure
Case Material
Inner Gear
Painting
Painting Method
Color
Mounting Direction
Ambient Temperature
Ambient Humidity
Ambient
Condition
Altitude
Atmosphere
Installation Location
1：1, 1：2
Spiral Bevel Gear
Straight Bevel Gear
No Painting
19, 25, 32, 40
Anion Painting, Acrylic Paint
Grey (Mansel value: 9B6/0.5)
No restriction in mounting angle(horizontally, vertically, incline, etc.) Horizontal Type, Vertical Type (Note)
−10℃ to 40℃
80% max.
1,000m max
Well ventilated place free from corrosive gas,
explosive gas, vapor and/or dust.
Indoors
Note) For the shaft positioning and shaft positioning codes of the horizontal and vertical type, refer to page G15.
G1
■K-Type (Metal Type)
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
■K-Type (Bearing Type)
1 Offering Reasonable Price・Simple・Quick Delivery
Simple Structure, reasonable price and short delivery of 3 days
2 Direction-Free Mounting
1 Compact
This product can be mounted to any direction.
Employing the Spiral Bevel Gear made of special steel of quench
hardening by carburizing
3 Ready for Use Without Any Extra Work
We ship the product after giving grease lubrication to the
gear tooth, therefore it is ready to use upon arrival.
Mountable to any direction and easy mounting
4 Maintenance-free
4 Variation
High class grease lubrication on shipment
●Diameter of the shaft φ4,φ6,φ8
●Reduction Ratio 1／1
5 Reduction Ratio
Parallel Shaft
（Performance
Table/Dimension）
Employing high class cast iron for casing and taper roller bearing for bearing
Gearmotor
with Brake
2 Low Noise & High Efficiency
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
Mountable to any direction according to the selected shaft
positioning However, it may possible that the model cannot be used
with the standard specification. For more details, refer to page G36.
S-Type
Reducer
4 Filled up lubrication
Right Angle Shaft
（Performance
Table/Dimension）
High class oil is filled up before shipment
Selectable gear ratio of either 1/1 or 1/2 according to the
using purpose
Water-resistant,
Outdoor
Gearmotor
with Brake
■KN Type
1 Strong
Simple Structure and Aluminium Die-Casting Case
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Characteristics
Characteristics
Characteristics
Gearmotor
with Brake
5 Reduction Ratio
Water-resistant,
Outdoor
Gearmotor
with Brake
Selectable gear ratio of 1/1 or 1/2 according to the using purpose
KBM Type
KB Type
Gearmotor
with Clutch
/Brake
KNB Type
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
KCM Type
KC Type
S-Type
Reducer
KNC Type
Concentric Hollow Shaft
Concentric Solid Shaft
Performance Table/
Dimension
Performance Table/
Dimension
Gearmotor
with Brake
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
（Parallel Shaft）
Reducer
S-Type
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
G2
■Lubrication
■Lubrication
Lubricant is filled with regulated amount at the moment of shipment from factory.
Model
General amount of oil
K10 Type
10g
K15 Type
30g
K20 Type
50g
Class of grease
Grease
Type Li-extreme-pressure additive
No.GI-00.
1 Painted color:
Grey (Mansel value 9B6/0.5)
2 Key Dimension:
New JIS Key is adopted.
(JIS B1301-1976(standard))
Model
KN-19 Type
0.3 L
KN-25 Type
0.7 L
KN-32 Type
1.0 L
KN-40 Type
1.5 L
Class of grease
Oil
JIS Gear Oil Industrial Use Class 2
Option
1 Painted color:
2 Key Dimension:
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
G3
■K-Type (Metal Type)
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
■K-Type (Bearing Type)
1 Offering Reasonable Price・Simple・Quick Delivery
Simple Structure, reasonable price and short delivery of 3 days
1 Compact
This product can be mounted to any direction.
3 Ready for Use Without Any Extra Work
We ship the product after giving grease lubrication to the
gear tooth, therefore it is ready to use upon arrival.
Mountable to any direction and easy mounting
4 Maintenance-free
4 Variation
High class grease lubrication on shipment
●Diameter of the shaft φ4,φ6,φ8
●Reduction Ratio 1／1
5 Reduction Ratio
Parallel Shaft
（Performance
Table/Dimension）
Employing high class cast iron for casing and taper roller bearing for bearing
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
Mountable to any direction according to the selected shaft
positioning However, it may possible that the model cannot be used
with the standard specification. For more details, refer to page G36.
S-Type
Reducer
4 Filled up lubrication
Right Angle Shaft
（Performance
Table/Dimension）
High class oil is filled up before shipment
Selectable gear ratio of either 1/1 or 1/2 according to the
using purpose
Water-resistant,
Outdoor
Gearmotor
with Brake
■KN Type
1 Strong
Simple Structure and Aluminium Die-Casting Case
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Characteristics
Characteristics
Characteristics
Gearmotor
with Brake
5 Reduction Ratio
Water-resistant,
Outdoor
Gearmotor
with Brake
Selectable gear ratio of 1/1 or 1/2 according to the using purpose
KBM Type
KB Type
Gearmotor
with Clutch
/Brake
KNB Type
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
KCM Type
KC Type
S-Type
Reducer
KNC Type
Performance Table/
Dimension
Performance Table/
Dimension
Gearmotor
with Brake
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
Reducer
S-Type
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
G2
■Lubrication
■Lubrication
Model
K10 Type
10g
K15 Type
30g
K20 Type
50g
Class of grease
Grease
Type Li-extreme-pressure additive
No.GI-00.
1 Painted color:
2 Key Dimension:
Model
KN-19 Type
0.3 L
KN-25 Type
0.7 L
KN-32 Type
1.0 L
KN-40 Type
1.5 L
Class of grease
Oil
JIS Gear Oil Industrial Use Class 2
Option
1 Painted color:
2 Key Dimension:
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
G3
R
Bevel gear boxes
K Type
Gear Box
Model・Type Designation
Performance Table
Dimension diagram
G4
G5
R
Bevel gear boxes
K Type
Gear Box
Performance Table
Dimension diagram
G4
G5
Model and
Type Designation
Model and
Type Designation
Model and
Type Designation
Bevel gear boxes (KOMPASS) K-Type are classified by codes as shown below.
When ordering/inquiring, indicate these codes.
Parallel Shaft
（Performance
Table/Dimension）
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Gearmotor
with Brake
K-Type (Metal Type)
K B M
Water-resistant,
Outdoor
Gearmotor
with Brake
04 1
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
Reducer
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
Reduction Ratio 1：1
Right Angle Shaft
（Performance
Table/Dimension）
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Frame No. and Diameter of Output shaft
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Bearing type
04：φ4
06：φ6
08：φ8
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
M：Metal Type
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
Classification by Form
B：Y shaft with one direction
C：Y shaft with two one direction
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Gearmotor
with Brake
Type
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
K-Type (Bearing Type)
K B
10
S-Type
Reducer
Performance Table/
Dimension
1
Gearmotor
with Brake
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduction Ratio
Reducer
1：1/1
2：1/2（reduce from shaft X to Y）
S-Type
Reducer
Technical
Information
Standard
Motors
Option
KOMPASS
Gearbox
G6
S-Type
Reducer
Technical
Information
Standard
Motors
Cautions
for Safety
GT-STEP
Index
Gearmotor
10：φ10
15：φ15
20：φ20
Reducer
Cautions
for Safety
Option
Type
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
G7
Model and
Type Designation
Model and
Type Designation
Model and
Type Designation
Bevel gear boxes (KOMPASS) K-Type are classified by codes as shown below.
Parallel Shaft
（Performance
Table/Dimension）
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Gearmotor
with Brake
K-Type (Metal Type)
K B M
Water-resistant,
Outdoor
Gearmotor
with Brake
04 1
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
Reducer
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
Reduction Ratio 1：1
Right Angle Shaft
（Performance
Table/Dimension）
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Bearing type
04：φ4
06：φ6
08：φ8
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
M：Metal Type
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Gearmotor
with Brake
Type
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
K-Type (Bearing Type)
K B
10
S-Type
Reducer
Performance Table/
Dimension
1
Gearmotor
with Brake
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduction Ratio
Reducer
1：1/1
S-Type
Reducer
Technical
Information
Standard
Motors
Option
KOMPASS
Gearbox
G6
S-Type
Reducer
Technical
Information
Standard
Motors
Cautions
for Safety
GT-STEP
Index
Gearmotor
10：φ10
15：φ15
20：φ20
Reducer
Cautions
for Safety
Option
Type
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
G7
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
K Type (Metal Type)
Shaft Diameter φ4・φ6・φ8
KBM Type
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Type
Reduction
Ratio Designation
KBM-081
KCM-081
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
100
50
KBM-041 Allowable Torque on
X and Y Shaft
KCM-041 （N・cm）
｛kgf・cm｝
X and Y Shaft
1：1
｛kgf・cm｝
Reducer
（Double Shaft）
S-Type
Reducer
“X”Shaft Rotation Speed (rpm)
Spec.
Designation
Allowable Torque on
X and Y Shaft
（N・cm）
｛kgf・cm｝
200
250
300
400
500
9.8
｛1.0｝
9.8
｛1.0｝
9.6
｛0.98｝
9.5
｛0.97｝
9.4
｛0.96｝
9.3
｛0.95｝
9.1
｛0.93｝
39.2
｛4.0｝
39.2
｛4.0｝
38.5
｛3.93｝
38.2
｛3.90｝
37.9
｛3.87｝
37.2
｛3.80｝
36.5
｛3.72｝
78.4
｛8.0｝
78.4
｛8.0｝
77.0
｛7.86｝
3-R3.5
3-φ3.5 Penetrated
CAD data：KBM-061
4.5
Y-shaft
Fig.G-4
4.5
KCM-061
14
41
73
4-φ2.5 effective depth 13
4.5
Y-shaft
56
15
(Notes)
1 Be sure to use the product within the allowable value.
●
2 Values in this performance table are the ones when the service factor is 1. In case of using the product under different condition, correct the load torque
●
referring the service factor in the Table-1 on page G32.
3 The KBM/KCM types are light and compact type gear box. When higher strength, rotation and speed are to be required in your operation, study to
●
introduce the KB/KC types.
4 Be sure that the overhung load (O.H.L.)and thrust load should never be imposed to the shaft of gear box. In case the overhung load and thrust load are
●
imposed, support the both edges of sprocket and gear with a bearing such as pillow, etc., in order to avoid these loads. (Refer to the Figure-1 on page
G32.)
5 Never use the product under the condition of sudden reverse rotation by plugging or of heavy shock load may occur. In such situations, study to
●
introduce the KB/KC Types.
φ6
17
19
27.5
4.5
φ6
4.5
13
85
4.5
4.5
4.5
13
26
14
4.5
14
121g
Water-resistant,
Outdoor
Gearmotor
with Brake
4.5
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Reduce
（Double Shaft）
Fig.G-1
3-R3.5
KBM-041
3-φ3.5 Penetrated
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
S-Type
Reducer
3
Fig.G-2
3
KCM-041
3-φ3.5 Penetrated
3-R3.5
φ4
φ4 16 13
10
φ4 16 13
10
55
Y-shaft
32
42
4.5
9
9
18
X-shaft
φ4
10
Round Weight
9
18
3
3
4.5
10
φ8
43g
Round Weight
44g
3-R4.5
KCM-081
3-φ4.5 Penetrated
φ8
24.5
20.5
20.5
22.5
30.5
20.5
22.5
30.5
20
50.5
81
φ8
φ8
6
15
15
6 5.5
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
20
20.5
22.5
30.5
50.5
6
X-shaft
20.5
22.5
30.5
20
50.5
101
6
15
30
16.5
16.5
197g
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
6 5.5
15
Round Weight
15
30
15
6 5.5
188g
16.5
88
30
16.5
16.5
47.5
67.5
15
16.5
5.5
24.5
20.5
Y-shaft
15
Round Weight
5.5
20
6
30
9
CAD data：KCM-081
Y-shaft
16 20.5
16.5
88
X-shaft
9
4.5
10
Fig.G-6
16.5
47.5
67.5
18
9
5.5
20
4.5
9
18
3
φ8
4.5
9
5.5
16 20.5
42
13
15
20.5
10
30.5
61
CAD data：KBM-081
Y-shaft
4.5
13
15
10
20.5
30.5
4.5
3
KBM-081
3-φ4.5 Penetrated
10
4.5
13
15
20.5
10
30.5
51
55
Fig.G-5
3-R4.5
10
Gearmotor
with Brake
10
3
9.5 13
φ4
13
15
20.5
3
10
10
X-shaft
CAD data：KCM-041
Y-shaft
9.5 13
32
Performance Table/
Dimension
Water-Resistant,
Outdoor
Gearmotor
with Brake
CAD data：KBM-041
Y-shaft
Water-resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
Gearmotor
with Brake
13
Round Weight
Gearmotor
with
Clutch/Brake
Right Angle Shaft
（Performance
Table/Dimension）
13
4.5
117g
4.5
4.5
4.5
Water-resistant,
Outdoor
Gearmotor
with Brake
Reducer
（Double Shaft）
26
26
14
56
13
13
14
17
19
27.5
15
42.5
13
Round Weight
73
X-shaft
17
19
15
27.5
42.5
13
26
4.5
14
41
15
X-shaft
17
19
27.5
15
42.5
70
14
17
φ6 20
Y-shaft
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
4.5
13.517
14
17
φ6 20
CAD data：KCM-061
3-φ3.5 Penetrated
3-R3.5
φ6
13.517
73.1
｛7.46｝
74.4
｛7.59｝
75.7
｛7.72｝
76.4
｛7.80｝
Fig.G-3
KBM-061
KCM Type
6 5.5
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
Reducer
S-Type
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G8
Model Code
P.G6
Technical
Information
P.G32∼G35
G9
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
K Type (Metal Type)
KBM Type
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Type
Reduction
Ratio Designation
KBM-081
KCM-081
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
100
50
X and Y Shaft
｛kgf・cm｝
X and Y Shaft
1：1
｛kgf・cm｝
Reducer
（Double Shaft）
S-Type
Reducer
Spec.
Designation
Allowable Torque on
X and Y Shaft
（N・cm）
｛kgf・cm｝
200
250
300
400
500
9.8
｛1.0｝
9.8
｛1.0｝
9.6
｛0.98｝
9.5
｛0.97｝
9.4
｛0.96｝
9.3
｛0.95｝
9.1
｛0.93｝
39.2
｛4.0｝
39.2
｛4.0｝
38.5
｛3.93｝
38.2
｛3.90｝
37.9
｛3.87｝
37.2
｛3.80｝
36.5
｛3.72｝
78.4
｛8.0｝
78.4
｛8.0｝
77.0
｛7.86｝
3-R3.5
3-φ3.5 Penetrated
CAD data：KBM-061
4.5
Y-shaft
Fig.G-4
4.5
KCM-061
14
41
73
4.5
Y-shaft
56
15
(Notes)
1 Be sure to use the product within the allowable value.
●
2 Values in this performance table are the ones when the service factor is 1. In case of using the product under different condition, correct the load torque
●
referring the service factor in the Table-1 on page G32.
3 The KBM/KCM types are light and compact type gear box. When higher strength, rotation and speed are to be required in your operation, study to
●
introduce the KB/KC types.
4 Be sure that the overhung load (O.H.L.)and thrust load should never be imposed to the shaft of gear box. In case the overhung load and thrust load are
●
imposed, support the both edges of sprocket and gear with a bearing such as pillow, etc., in order to avoid these loads. (Refer to the Figure-1 on page
G32.)
5 Never use the product under the condition of sudden reverse rotation by plugging or of heavy shock load may occur. In such situations, study to
●
introduce the KB/KC Types.
φ6
17
19
27.5
4.5
φ6
4.5
13
85
4.5
4.5
4.5
13
26
14
4.5
14
121g
Water-resistant,
Outdoor
Gearmotor
with Brake
4.5
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Reduce
（Double Shaft）
Fig.G-1
3-R3.5
KBM-041
3-φ3.5 Penetrated
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
S-Type
Reducer
3
Fig.G-2
3
KCM-041
3-φ3.5 Penetrated
3-R3.5
φ4
φ4 16 13
10
φ4 16 13
10
55
Y-shaft
32
42
4.5
9
9
18
X-shaft
φ4
10
Round Weight
9
18
3
3
4.5
10
φ8
43g
Round Weight
44g
3-R4.5
KCM-081
3-φ4.5 Penetrated
φ8
24.5
20.5
20.5
22.5
30.5
20.5
22.5
30.5
20
50.5
81
φ8
φ8
6
15
15
6 5.5
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
20
20.5
22.5
30.5
50.5
6
X-shaft
20.5
22.5
30.5
20
50.5
101
6
15
30
16.5
16.5
197g
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
6 5.5
15
Round Weight
15
30
15
6 5.5
188g
16.5
88
30
16.5
16.5
47.5
67.5
15
16.5
5.5
24.5
20.5
Y-shaft
15
Round Weight
5.5
20
6
30
9
CAD data：KCM-081
Y-shaft
16 20.5
16.5
88
X-shaft
9
4.5
10
Fig.G-6
16.5
47.5
67.5
18
9
5.5
20
4.5
9
18
3
φ8
4.5
9
5.5
16 20.5
42
13
15
20.5
10
30.5
61
CAD data：KBM-081
Y-shaft
4.5
13
15
10
20.5
30.5
4.5
3
KBM-081
3-φ4.5 Penetrated
10
4.5
13
15
20.5
10
30.5
51
55
Fig.G-5
3-R4.5
10
Gearmotor
with Brake
10
3
9.5 13
φ4
13
15
20.5
3
10
10
X-shaft
CAD data：KCM-041
Y-shaft
9.5 13
32
Performance Table/
Dimension
Water-Resistant,
Outdoor
Gearmotor
with Brake
CAD data：KBM-041
Y-shaft
Water-resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
Gearmotor
with Brake
13
Round Weight
Gearmotor
with
Clutch/Brake
Right Angle Shaft
（Performance
Table/Dimension）
13
4.5
117g
4.5
4.5
4.5
Water-resistant,
Outdoor
Gearmotor
with Brake
Reducer
（Double Shaft）
26
26
14
56
13
13
14
17
19
27.5
15
42.5
13
Round Weight
73
X-shaft
17
19
15
27.5
42.5
13
26
4.5
14
41
15
X-shaft
17
19
27.5
15
42.5
70
14
17
φ6 20
Y-shaft
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
4.5
13.517
14
17
φ6 20
CAD data：KCM-061
3-φ3.5 Penetrated
3-R3.5
φ6
13.517
73.1
｛7.46｝
74.4
｛7.59｝
75.7
｛7.72｝
76.4
｛7.80｝
Fig.G-3
KBM-061
KCM Type
6 5.5
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
Reducer
S-Type
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G8
Model Code
P.G6
Technical
Information
P.G32∼G35
G9
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
K Type (Bearing Type)
KB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
KB-101
Gearmotor
with
Clutch/Brake
KC-101
Reducer
（Double Shaft）
S-Type
Reducer
1：1
KB-151
Allowable Thrust
Load(N) (kgf)
50
100
200
300
400
600
900
1200 1500 1800 2500 3600
0.01
0.02
0.05
0.07
0.09
0.14
0.20
0.26
0.31
0.35
0.38
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
78
78
78
78
69
69
69
69
69
59
49
39
｛8｝｛8｝｛8｝｛8｝｛7｝｛7｝｛7｝｛7｝｛7｝｛6｝｛5｝｛4｝
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
127 127 118 118 118 118 108 108 108
98
78
59
｛13｝｛13｝｛12｝｛12｝｛12｝｛12｝｛11｝｛11｝｛11｝｛10｝｛8｝｛6｝
0.05
0.09
0.18
0.27
0.35
0.51
0.75
0.96
1.16
1.30
1.44
255 255 255 245 245 235 225 216 216 186 157 127
｛26｝｛26｝｛26｝｛25｝｛25｝｛24｝｛23｝｛22｝｛22｝｛19｝｛16｝｛13｝
Gearmotor
with Clutch
/Brake
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
294 294 284 284 274 265 265 255 245 216 176 147
｛30｝｛30｝｛29｝｛29｝｛28｝｛27｝｛27｝｛26｝｛25｝｛22｝｛18｝｛15｝
Reduce
（Double Shaft）
Allowable Transfer
Capacity (kW)
KC-151
S-Type
Reducer
KB-201
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
KC-201
0.09
0.18
0.36
0.52
0.68
0.95
1.38
1.78
2.15
2.50
2.55
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
353 353 343 333 333 323 314 304 294 265 216 176
｛36｝｛36｝｛35｝｛34｝｛34｝｛33｝｛32｝｛31｝｛30｝｛27｝｛22｝｛18｝
Gearmotor
with Brake
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
529 529 519 510 500 490 470 451 441 392 314 255
｛54｝｛54｝｛53｝｛52｝｛51｝｛50｝｛48｝｛46｝｛45｝｛40｝｛32｝｛26｝
Water-resistant,
Outdoor
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Reduce
（Double Shaft）
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
2.06 2.06 2.06 1.96 1.96 1.96 1.86 1.86 1.76 1.67 1.27 1.08
｛0.21｝
｛0.21｝
｛0.21｝
｛0.20｝
｛0.20｝
｛0.20｝
｛0.19｝
｛0.19｝
｛0.18｝
｛0.17｝
｛0.13｝
｛0.11｝
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
88
88
88
88
88
78
78
78
78
69
59
49
｛9｝｛9｝｛9｝｛9｝｛9｝｛8｝｛8｝｛8｝｛8｝｛7｝｛6｝｛5｝
Performance Table/
Dimension
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
137 137 137 127 127 127 127 118 118 108
88
69
｛14｝｛14｝｛14｝｛13｝｛13｝｛13｝｛13｝｛12｝｛12｝｛11｝｛9｝｛7｝
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
KB-102
KC-102
S-Type
Reducer
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
1：2
KB-152
KC-152
S-Type
Reducer
Technical
Information
KB-202
Cautions
for Safety
KC-202
Option
KOMPASS
Gearbox
G10
0.03
0.04
0.06
0.09
0.12
0.14
0.16
0.17
59
｛6｝
14
0.04
0.08
0.13
0.17
0.25
0.36
0.46
0.55
0.62
0.69
98
｛10｝
9
18
118
｛12｝
18
5 2
X Shaft
0.10
0.19
0.28
0.37
0.53
0.77
0.99
1.15
1.31
1.40
3-φ12
3-φ6.5
14
18
9
φ26H7
Gearmotor
with
Clutch/Brake
18
46 48
82
Y Shaft
2
5
18
102
58
2
5
Nameplate
18
5 2
20
Reducer
（Double Shaft）
18
Y Shaft
102
Water-resistant,
Outdoor
Gearmotor
with Brake
12-φ5.5
14
18
82
15
20
φ10h 7
Gearmotor
with Clutch
/Brake
0.5kg
Round Weight
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
φ26H7
0.4kg
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
15
X Shaft
φ26H7
Fig.G-9
196
｛20｝
KB-151
KB-152
274
｛28｝
137
66
41
3-φ18
Fig.G-10
CAD data：KB-15
66
62
30
27
3-φ8.5
22
22
30
27
8-φ8.5
17
80 48
85
5
31
31
X Shaft
Round Weight
140
170
3
8
Nameplate
31
S-Type
Reducer
30
27
8 3
X Shaft
1.8kg
Round Weight
Reduce
（Double Shaft）
φ15h 7
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
2.2kg
Reducer
KB-201
KB-202
168
80
3-φ8.5
48
3-φ20
CAD data：KB-20
40
35
26
26
22.5
Y Shaft
4
10
Nameplate
36
10 4
35
X Shaft
φ52H7
Round Weight
φ20h 7
3.1kg
120
CAD data：KC-20
80
3-φ20
80
3-φ8.5
26
36
26
12-φ8.5
36
22.5
36
6
36
φ52H7
φ52H7
36
40
Technical
Information
Standard
Motors
φ20h 7
6
166
206
S-Type
Reducer
76
72
40
35
φ20h 7
22.5
36
92
6
40
35
8-φ8.5
φ52H7
36
KC-201
KC-202
240
φ20h 7
36
Fig.G-12
76
72
36
(Notes)
1 Be sure to use the product within the allowable value. In case of the ratio of (1 : 2), speed reduction is applied to Y shaft.
●
2 Values in this performance table are the ones when the service factor is 1. In case of using the product under different condition, refer to the“Service
●
Factor”in the Table-2 on page G33.
3 An overhung load(O.H.L.) means the allowable load imposed on the center of the shaft. In case of using the product under different condition, refer to the
●
factor K1 and K2 in the Table-3 and 4 on page G33.
4 When using the type with the ratio of (1 : 2) with increased speed(Increasing speed from Y shaft to X shaft.), the torque on the X shaft become 1/2 of the
●
value in the performance table(torque on the Y shaft).
5 The torque at Y shaft in the KC Type is the sum of right and left shaft.
●
6 The O.H.L. value at Y shaft in the KC Type is the sum of right and left shaft.
●
31
Y Shaft
100
31
Water-Resistant,
Outdoor
Gearmotor
with Brake
80 48
85
φ42H7
Fig.G-11
274
｛28｝
31
5
3
8
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
17
Y Shaft
φ15h 7
1.57
196
｛20｝
12-φ8.5
22
22
φ42H7
φ42H7
118
｛12｝
30
27
31
30
27
8 3
66
62
36
140
170
100
3
8
Nameplate
66
3-φ8.5
S-Type
Reducer
φ15h 7
31
Y Shaft
69
｛7｝
66
3-φ18
5
φ42H7
31
φ42H7
59
｛6｝
CAD data：KC-15
φ15h 7
17
31
KC-151
KC-152
192
φ15h 7
588 588 578 568 559 539 529 510 490 441 363 294
｛60｝｛60｝｛59｝｛58｝｛57｝｛55｝｛54｝｛52｝｛50｝｛45｝｛37｝｛30｝
P.G32∼G35
40
38
20
15
φ26H7
46 48
φ10h 7
0.80
372 372 363 363 353 343 333 323 314 274 235 186
｛38｝｛38｝｛37｝｛37｝｛36｝｛35｝｛34｝｛33｝｛32｝｛28｝｛24｝｛19｝
Technical
Information
37
Reduce
（Double Shaft）
0.20
19.6 19.6 18.6 18.1 17.6 17.0 16.4 15.7 14.7 13.9 10.8 8.33
｛2.00｝
｛2.00｝
｛1.90｝
｛1.85｝
｛1.80｝
｛1.73｝
｛1.67｝
｛1.60｝
｛1.50｝
｛1.42｝
｛1.10｝
｛0.85｝
Model Code
P.G6
Gearmotor
with Brake
φ10h 7
18
58
2
5
Nameplate
37
Parallel Shaft
（Performance
Table/Dimension）
CAD data：KC-10
φ10h 7
18
Round Weight
8.43 8.43 8.23 8.13 8.04 7.84 7.55 7.25 7.06 6.57 5.29 4.21
｛0.86｝
｛0.86｝
｛0.84｝
｛0.83｝
｛0.82｝
｛0.80｝
｛0.77｝
｛0.74｝
｛0.72｝
｛0.67｝
｛0.54｝
｛0.43｝
0.05
8-φ5.5
9
36
0.02
14
20
15
φ10h 7
18
294 294 284 284 274 265 265 255 245 216 176 147
｛30｝｛30｝｛29｝｛29｝｛28｝｛27｝｛27｝｛26｝｛25｝｛22｝｛18｝｛15｝
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
3-φ6.5
Y Shaft
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
3-φ12
KC-101
KC-102
114
18
98
255 255 255 245 245 235 225 216 216 186 157 127 ｛10｝
｛26｝｛26｝｛26｝｛25｝｛25｝｛24｝｛23｝｛22｝｛22｝｛19｝｛16｝｛13｝
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
69
｛7｝
40
38
20
15
φ26H7
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Allowable Transfer
Capacity (kW)
Standard
Motors
GT-STEP
Index
Gearmotor
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
0.02
82
37
25
Fig.G-8
CAD data：KB-10
2.95
Allowable Torque on 17.6 17.6 17.2 16.7 16.2 15.2 14.7 14.2 13.7
13.2 9.80 7.84
X and Y Shaft
｛1.80｝
｛1.75｝
｛1.70｝
｛1.65｝
｛1.55｝
｛1.50｝
｛1.45｝
｛1.40｝
｛1.35｝
｛1.00｝
｛0.80｝
（N・m）
｛kgf・m｝｛1.80｝
0.005 0.01
Fig.G-7
1.66
6.86 5.49 4.41
X and Y Shaft
｛0.90｝
｛0.88｝
｛0.87｝
｛0.85｝
｛0.83｝
｛0.81｝
｛0.78｝
｛0.75｝
｛0.70｝
｛0.56｝
｛0.45｝
（N・m）
｛kgf・m｝｛0.90｝
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Water-resistant,
Outdoor
Gearmotor
with Brake
X Shaft Y Shaft
KB-101
KB-102
0.44
Allowable Torque on 2.35 2.35 2.25 2.25 2.16 2.16 2.06 2.06 1.96 1.86
1.47 1.18
X and Y Shaft
｛0.24｝
｛0.23｝
｛0.23｝
｛0.22｝
｛0.22｝
｛0.21｝
｛0.21｝
｛0.20｝
｛0.19｝
｛0.15｝
｛0.12｝
（N・m）
｛kgf・m｝｛0.24｝
Allowable Transfer
Capacity (kW)
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Spec.
Designation
KC Type
Y Shaft
Cautions
for Safety
92
Y Shaft
4
10
36
36
10 4
120
35
X Shaft
φ52H7
Round Weight
4
10
Nameplate
166
206
40
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
φ20h 7
3.4kg
1
rotation direction shown by arrow just indicates the directional relation between the shafts, and does not limit the rotation direction.
(Note)●The
Therefore, both forward and reverse rotation can be feasible.
2
●Right-hand
rotation for X-shaft against left-hand rotation for Y-shaft is regarded as standard.
3
●The
key groove for X shaft and that for Y shaft are not necessarily aligned.
G11
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
K Type (Bearing Type)
KB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
KB-101
Gearmotor
with
Clutch/Brake
KC-101
Reducer
（Double Shaft）
S-Type
Reducer
1：1
KB-151
Allowable Thrust
Load(N) (kgf)
50
100
200
300
400
600
900
1200 1500 1800 2500 3600
0.01
0.02
0.05
0.07
0.09
0.14
0.20
0.26
0.31
0.35
0.38
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
78
78
78
78
69
69
69
69
69
59
49
39
｛8｝｛8｝｛8｝｛8｝｛7｝｛7｝｛7｝｛7｝｛7｝｛6｝｛5｝｛4｝
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
127 127 118 118 118 118 108 108 108
98
78
59
｛13｝｛13｝｛12｝｛12｝｛12｝｛12｝｛11｝｛11｝｛11｝｛10｝｛8｝｛6｝
0.05
0.09
0.18
0.27
0.35
0.51
0.75
0.96
1.16
1.30
1.44
255 255 255 245 245 235 225 216 216 186 157 127
｛26｝｛26｝｛26｝｛25｝｛25｝｛24｝｛23｝｛22｝｛22｝｛19｝｛16｝｛13｝
Gearmotor
with Clutch
/Brake
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
294 294 284 284 274 265 265 255 245 216 176 147
｛30｝｛30｝｛29｝｛29｝｛28｝｛27｝｛27｝｛26｝｛25｝｛22｝｛18｝｛15｝
Reduce
（Double Shaft）
Allowable Transfer
Capacity (kW)
KC-151
S-Type
Reducer
KB-201
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
KC-201
0.09
0.18
0.36
0.52
0.68
0.95
1.38
1.78
2.15
2.50
2.55
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
353 353 343 333 333 323 314 304 294 265 216 176
｛36｝｛36｝｛35｝｛34｝｛34｝｛33｝｛32｝｛31｝｛30｝｛27｝｛22｝｛18｝
Gearmotor
with Brake
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
529 529 519 510 500 490 470 451 441 392 314 255
｛54｝｛54｝｛53｝｛52｝｛51｝｛50｝｛48｝｛46｝｛45｝｛40｝｛32｝｛26｝
Water-resistant,
Outdoor
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Reduce
（Double Shaft）
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
2.06 2.06 2.06 1.96 1.96 1.96 1.86 1.86 1.76 1.67 1.27 1.08
｛0.21｝
｛0.21｝
｛0.21｝
｛0.20｝
｛0.20｝
｛0.20｝
｛0.19｝
｛0.19｝
｛0.18｝
｛0.17｝
｛0.13｝
｛0.11｝
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
88
88
88
88
88
78
78
78
78
69
59
49
｛9｝｛9｝｛9｝｛9｝｛9｝｛8｝｛8｝｛8｝｛8｝｛7｝｛6｝｛5｝
Performance Table/
Dimension
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
137 137 137 127 127 127 127 118 118 108
88
69
｛14｝｛14｝｛14｝｛13｝｛13｝｛13｝｛13｝｛12｝｛12｝｛11｝｛9｝｛7｝
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
KB-102
KC-102
S-Type
Reducer
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
1：2
KB-152
KC-152
S-Type
Reducer
Technical
Information
KB-202
Cautions
for Safety
KC-202
Option
KOMPASS
Gearbox
G10
0.03
0.04
0.06
0.09
0.12
0.14
0.16
0.17
59
｛6｝
14
0.04
0.08
0.13
0.17
0.25
0.36
0.46
0.55
0.62
0.69
98
｛10｝
9
18
118
｛12｝
18
5 2
X Shaft
0.10
0.19
0.28
0.37
0.53
0.77
0.99
1.15
1.31
1.40
3-φ12
3-φ6.5
14
18
9
φ26H7
Gearmotor
with
Clutch/Brake
18
46 48
82
Y Shaft
2
5
18
102
58
2
5
Nameplate
18
5 2
20
Reducer
（Double Shaft）
18
Y Shaft
102
Water-resistant,
Outdoor
Gearmotor
with Brake
12-φ5.5
14
18
82
15
20
φ10h 7
Gearmotor
with Clutch
/Brake
0.5kg
Round Weight
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
φ26H7
0.4kg
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
15
X Shaft
φ26H7
Fig.G-9
196
｛20｝
KB-151
KB-152
274
｛28｝
137
66
41
3-φ18
Fig.G-10
CAD data：KB-15
66
62
30
27
3-φ8.5
22
22
30
27
8-φ8.5
17
80 48
85
5
31
31
X Shaft
Round Weight
140
170
3
8
Nameplate
31
S-Type
Reducer
30
27
8 3
X Shaft
1.8kg
Round Weight
Reduce
（Double Shaft）
φ15h 7
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
2.2kg
Reducer
KB-201
KB-202
168
80
3-φ8.5
48
3-φ20
CAD data：KB-20
40
35
26
26
22.5
Y Shaft
4
10
Nameplate
36
10 4
35
X Shaft
φ52H7
Round Weight
φ20h 7
3.1kg
120
CAD data：KC-20
80
3-φ20
80
3-φ8.5
26
36
26
12-φ8.5
36
22.5
36
6
36
φ52H7
φ52H7
36
40
Technical
Information
Standard
Motors
φ20h 7
6
166
206
S-Type
Reducer
76
72
40
35
φ20h 7
22.5
36
92
6
40
35
8-φ8.5
φ52H7
36
KC-201
KC-202
240
φ20h 7
36
Fig.G-12
76
72
36
(Notes)
1 Be sure to use the product within the allowable value. In case of the ratio of (1 : 2), speed reduction is applied to Y shaft.
●
●
3 An overhung load(O.H.L.) means the allowable load imposed on the center of the shaft. In case of using the product under different condition, refer to the
●
●
●
●
31
Y Shaft
100
31
Water-Resistant,
Outdoor
Gearmotor
with Brake
80 48
85
φ42H7
Fig.G-11
274
｛28｝
31
5
3
8
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
17
Y Shaft
φ15h 7
1.57
196
｛20｝
12-φ8.5
22
22
φ42H7
φ42H7
118
｛12｝
30
27
31
30
27
8 3
66
62
36
140
170
100
3
8
Nameplate
66
3-φ8.5
S-Type
Reducer
φ15h 7
31
Y Shaft
69
｛7｝
66
3-φ18
5
φ42H7
31
φ42H7
59
｛6｝
CAD data：KC-15
φ15h 7
17
31
KC-151
KC-152
192
φ15h 7
588 588 578 568 559 539 529 510 490 441 363 294
｛60｝｛60｝｛59｝｛58｝｛57｝｛55｝｛54｝｛52｝｛50｝｛45｝｛37｝｛30｝
P.G32∼G35
40
38
20
15
φ26H7
46 48
φ10h 7
0.80
372 372 363 363 353 343 333 323 314 274 235 186
｛38｝｛38｝｛37｝｛37｝｛36｝｛35｝｛34｝｛33｝｛32｝｛28｝｛24｝｛19｝
Techincal
Information
37
Reduce
（Double Shaft）
0.20
19.6 19.6 18.6 18.1 17.6 17.0 16.4 15.7 14.7 13.9 10.8 8.33
｛2.00｝
｛2.00｝
｛1.90｝
｛1.85｝
｛1.80｝
｛1.73｝
｛1.67｝
｛1.60｝
｛1.50｝
｛1.42｝
｛1.10｝
｛0.85｝
Model Code
P.G6
Gearmotor
with Brake
φ10h 7
18
58
2
5
Nameplate
37
Parallel Shaft
（Performance
Table/Dimension）
CAD data：KC-10
φ10h 7
18
Round Weight
8.43 8.43 8.23 8.13 8.04 7.84 7.55 7.25 7.06 6.57 5.29 4.21
｛0.86｝
｛0.86｝
｛0.84｝
｛0.83｝
｛0.82｝
｛0.80｝
｛0.77｝
｛0.74｝
｛0.72｝
｛0.67｝
｛0.54｝
｛0.43｝
0.05
8-φ5.5
9
36
0.02
14
20
15
φ10h 7
18
294 294 284 284 274 265 265 255 245 216 176 147
｛30｝｛30｝｛29｝｛29｝｛28｝｛27｝｛27｝｛26｝｛25｝｛22｝｛18｝｛15｝
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
3-φ6.5
Y Shaft
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
3-φ12
KC-101
KC-102
114
18
98
255 255 255 245 245 235 225 216 216 186 157 127 ｛10｝
｛26｝｛26｝｛26｝｛25｝｛25｝｛24｝｛23｝｛22｝｛22｝｛19｝｛16｝｛13｝
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
69
｛7｝
40
38
20
15
φ26H7
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Allowable Transfer
Capacity (kW)
Standard
Motors
GT-STEP
Index
Gearmotor
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
0.02
82
37
25
Fig.G-8
CAD data：KB-10
2.95
13.2 9.80 7.84
X and Y Shaft
｛1.80｝
｛1.75｝
｛1.70｝
｛1.65｝
｛1.55｝
｛1.50｝
｛1.45｝
｛1.40｝
｛1.35｝
｛1.00｝
｛0.80｝
（N・m）
｛kgf・m｝｛1.80｝
0.005 0.01
Fig.G-7
1.66
6.86 5.49 4.41
X and Y Shaft
｛0.90｝
｛0.88｝
｛0.87｝
｛0.85｝
｛0.83｝
｛0.81｝
｛0.78｝
｛0.75｝
｛0.70｝
｛0.56｝
｛0.45｝
（N・m）
｛kgf・m｝｛0.90｝
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Water-resistant,
Outdoor
Gearmotor
with Brake
X Shaft Y Shaft
KB-101
KB-102
0.44
Allowable Torque on 2.35 2.35 2.25 2.25 2.16 2.16 2.06 2.06 1.96 1.86
1.47 1.18
X and Y Shaft
｛0.24｝
｛0.23｝
｛0.23｝
｛0.22｝
｛0.22｝
｛0.21｝
｛0.21｝
｛0.20｝
｛0.19｝
｛0.15｝
｛0.12｝
（N・m）
｛kgf・m｝｛0.24｝
Allowable Transfer
Capacity (kW)
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Spec.
Designation
KC Type
Y Shaft
Cautions
for Safety
92
Y Shaft
4
10
36
36
10 4
120
35
X Shaft
φ52H7
Round Weight
4
10
Nameplate
166
206
40
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
φ20h 7
3.4kg
1
rotation direction shown by arrow just indicates the directional relation between the shafts, and does not limit the rotation direction.
(Note)●The
Therefore, both forward and reverse rotation can be feasible.
2
●Right-hand
rotation for X-shaft against left-hand rotation for Y-shaft is regarded as standard.
3
●The
key groove for X shaft and that for Y shaft are not necessarily aligned.
G11
R
Bevel gear boxes
KN Type
Gear Box
Performance Table
Dimension diagram
G12
G13
R
Bevel gear boxes
KN Type
Gear Box
Performance Table
Dimension diagram
G12
G13
KN Type
Shaft Positioning Code
Bevel gear boxes (KOMPASS) KN-Type are classified by codes as shown below.
■Shaft Positioning and Shaft Positioning Code
In <KOMPASS> Series KN-Type, 24 ways are available as standard types of shaft positioning, according to the shaft
direction and shaft rotation. Therefore, when ordering, the shaft positioning should be taken into consideration in addition
to the type codes.
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
KN-Type
KN B
19
(Notes)
1 HH1043
Reducer
（Double Shaft）
S-Type
Reducer
Shaft Positioning（Refer to page G15）
1 These figures indicate the mounting space and the horizontal mounting (floor mounting).
●
2 The rotation direction shown by arrow just indicates the relation of rotation direction between each shaft and not limits the direction. Shafts can be rotated
●
in both forward and reverse direction.
3 The mark ▼ indicates the wall surface in which the filler opening and drain plug exist, in case of horizontal mounting (floor mounting). The ones with no
●
mark means that the wall surface comes to the back side of the figures described. (Standard Specification)
4 Shaft Positioning: In case of wall mounting in which the input shaft (X shaft) is to be used in the upward position other than“HU Type”, inform us
●
accordingly when ordering. Because the lubrication method for bearing is different in this case.
5 For use other than horizontal mounting, refer to page G36.
●
Right Angle Shaft
（Performance
Table/Dimension）
KNB-Type
1：1/1
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Classification by Mount
19：φ19
25：φ25
32：φ32
40：φ40
Horizontal Type (plan view)
Reduction Ratio
Gearmotor
with Brake
Shaft Positioning
Code
Model and
Type Designation
Model and
Type Designation
KNC-Type
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
HH1043 HH1044 HH1033 HH1034
HH1343 HH1344
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Parallel Shaft
（Performance
Table/Dimension）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Type
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
Reduce
（Double Shaft）
HH1022 HH1025 HH1052 HH1055
S-Type
Reducer
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Vertical Type (front view)
Performance Table/
Dimension
HH1252 HH1255
S-Type
Reducer
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
HU2043 HU2044 HU2033 HU2034
HU2343 HU2344
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
Option
HD5043 HD5044 HD5033 HD5034
HD5343 HD5344
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G14
G15
KN Type
Shaft Positioning Code
Bevel gear boxes (KOMPASS) KN-Type are classified by codes as shown below.
■Shaft Positioning and Shaft Positioning Code
In <KOMPASS> Series KN-Type, 24 ways are available as standard types of shaft positioning, according to the shaft
direction and shaft rotation. Therefore, when ordering, the shaft positioning should be taken into consideration in addition
to the type codes.
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
KN-Type
KN B
19
(Notes)
1 HH1043
Reducer
（Double Shaft）
S-Type
Reducer
Shaft Positioning（Refer to page G15）
1 These figures indicate the mounting space and the horizontal mounting (floor mounting).
●
2 The rotation direction shown by arrow just indicates the relation of rotation direction between each shaft and not limits the direction. Shafts can be rotated
●
in both forward and reverse direction.
3 The mark ▼ indicates the wall surface in which the filler opening and drain plug exist, in case of horizontal mounting (floor mounting). The ones with no
●
mark means that the wall surface comes to the back side of the figures described. (Standard Specification)
4 Shaft Positioning: In case of wall mounting in which the input shaft (X shaft) is to be used in the upward position other than“HU Type”, inform us
●
accordingly when ordering. Because the lubrication method for bearing is different in this case.
5 For use other than horizontal mounting, refer to page G36.
●
Right Angle Shaft
（Performance
Table/Dimension）
KNB-Type
1：1/1
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Classification by Mount
19：φ19
25：φ25
32：φ32
40：φ40
Horizontal Type (plan view)
Reduction Ratio
Gearmotor
with Brake
Shaft Positioning
Code
Model and
Type Designation
Model and
Type Designation
KNC-Type
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
HH1043 HH1044 HH1033 HH1034
HH1343 HH1344
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Parallel Shaft
（Performance
Table/Dimension）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Type
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
Reduce
（Double Shaft）
HH1022 HH1025 HH1052 HH1055
S-Type
Reducer
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Vertical Type (front view)
Performance Table/
Dimension
HH1252 HH1255
S-Type
Reducer
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
HU2043 HU2044 HU2033 HU2034
HU2343 HU2344
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
Option
HD5043 HD5044 HD5033 HD5034
HD5343 HD5344
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G14
G15
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ19
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
1：1
KNB-191
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
0.03
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
KNB-192
2.67
3.30
KNC-192
2500
4.40
3600
4.40
0.07
0.14
0.27
0.40
0.53
0.78
1.15
1.50
1.85
Fig.G-15
4.40
2.20
2.17
KNB-191 HH1022
KNB-191 HH1025
KNB-192 HH1022
KNB-192 HH1025
180
φ19h6
56
Fig.G-13
KNB-191 HH1033
KNB-191 HH1034
KNB-192 HH1033
KNB-192 HH1034
Fig.G-14
CAD data：
KNB-192-HH104
193
6
Y Shaft
38 27
76
154
125
4-φ10.5
10kg
125
154
14.5
53
53.5
38
27
76
53.5
Dimension
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Round Weight
77
21.5
154 125
21.5
φ19h6
257
4-φ10.5
180
17
φ66
38
27
Cautions
for Safety
6
4-φ10.5
117.5
27
Round Weight
X Shaft
φ19h6
21.5
Round Weight
10kg
KNB-192
φ18h6
20.5
Model Code
P.G14
S-Type
Reducer
CAD data：
KNB-191-HU203
CAD data：
KNB-192-HU203
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
56
S-Type
Reducer
53
Performance Table/
Dimension
X Shaft
180
21.5
6
76
38
27
125
154
Water-Resistant,
Outdoor
Gearmotor
with Brake
17
53.5
Gearmotor
with Brake
256
φ19h6
Y Shaft
Round Weight
10kg
Dimension
A
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Type
10kg
Dimension
A
B
125
154
76
4-φ10.5
14.5
125
154
Reducer
S-Type
Reducer
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Round Weight
1 The sizes of oil plug are PF1/2 for intake and PT1/4 for vent. (Standard Specification)
●
2 The key groove between the X shaft and Y shaft is not always aligned.
●
10kg
Dimension
A
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Type
(Notes)
B
Option
KNB-191
20.5
6
4-φ10.5
Type
17
φA
6
B
21.5
53.5
180
38
A
φ18h6
257
X Shaft
φA
6
Type
KNB-192
Reduce
（Double Shaft）
φ66
256
Y Shaft
125
154
21.5
77
φA
38 27
17
φ66
Dimension
116
53
X Shaft
77
B
GT-STEP
Index
Gearmotor
56
φ19h6
14.5
B
φ19h6
6
φ66
Y Shaft
A
KNB-191
193
76
125 154
Dimension
KNB-191 HU2033
KNB-191 HU2034
KNB-192 HU2033
KNB-192 HU2034
CAD data：
KNB-192-HU204
38
27
38
27
φ19h6
6
Y Shaft
53
Water-resistant,
Outdoor
Gearmotor
with Brake
B
116
φA
38 27
CAD data：
KNB-192-HH103
10kg
Fig.G-18
193
77
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Clutch
/Brake
Type
CAD data：
KNB-191-HU204
S-Type
Reducer
Gearmotor
with Brake
125
154
6
A
KNB-191 HU2043
KNB-191 HU2044
KNB-192 HU2043
KNB-192 HU2044
129
14.5
40
21.5
180
154
125
4-φ10.5
Y Shaft
125
154
17
116
129
116
φ19h6
125
154
191
76
17
φA
φ66
6
X Shaft
192
193
116
φA
116
B
CAD data：
KNB-191-HH103
Water-resistant,
Outdoor
Gearmotor
with Brake
Reducer
（Double Shaft）
75
φ66
38
27
Fig.G-17
Gearmotor
with Brake
B
X Shaft
Round Weight
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with
Clutch/Brake
53
38
27
6
CAD data：
KNB-191-HH104
CAD data：
KNB-192-HH105
56
53
B
KNB-191 HH1043
KNB-191 HH1044
KNB-192 HH1043
KNB-192 HH1044
CAD data：
KNB-191-HH105
180
Type
1 Be sure to use the product within the allowable value. In case of the ratio of (1 : 2), speed reduction is given to Y shaft.
●
●
3 An overhung load(O.H.L.) means the allowable load imposed on the center of the shaft. In case using the product under different condition, refer to the
●
●
●
●
7 The allowable thrust load will be the half of the O.H.L. value respectively.
●
CAD data：
KNB-192-HH102
77
25.5
25.5
25.5
25.5
24.5
24.5
24.5
23.5
23.5
16.7
10.8
25.5
22.5
｛2.6｝｛2.6｝｛2.6｝｛2.6｝｛2.6｝｛2.5｝｛2.5｝｛2.5｝｛2.4｝｛2.4｝｛2.3｝｛1.7｝｛1.1｝
1760 1760 1760 1760 1760 1720 1670 1470 1270 1080
833
784
980
｛180｝｛180｝｛180｝｛180｝｛180｝｛175｝｛170｝｛150｝｛130｝｛110｝｛100｝｛85｝｛80｝
KNB-191 HH1052
KNB-191 HH1055
KNB-192 HH1052
KNB-192 HH1055
Fig.G-16
257
2.20
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
CAD data：
KNB-191-HH102
257
6
(Notes)
117.5
G16
3.95
1800
1180 1180 1180 1180 1180 1130 1130 1080 1080
882
784
735
833
｛120｝｛120｝｛120｝｛120｝｛120｝｛115｝｛115｝｛110｝｛110｝｛90｝｛85｝｛80｝｛75｝
Technical
Information
KOMPASS
Gearbox
1500
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
S-Type
Reducer
Standard
Motors
2.05
1200
1960 1960 1960 1960 1960 1810 1470 1180 1030
980
931
784
735
｛200｝｛200｝｛200｝｛200｝｛200｝｛185｝｛150｝｛120｝｛105｝｛100｝｛95｝｛80｝｛75｝
Gearmotor
with Brake
Reducer
1.50
900
38 27
Performance Table/
Dimension
Water-Resistant,
Outdoor
Gearmotor
with Brake
1.15
600
1760 1760 1760 1760 1670 1620 1270 1080
882
833
784
686
637
｛180｝｛180｝｛180｝｛180｝｛170｝｛165｝｛130｝｛110｝｛90｝｛85｝｛80｝｛70｝｛65｝
KNC-191
Reduce
（Double Shaft）
S-Type
Reducer
0.77
400
77
Gearmotor
with Clutch
/Brake
S-Type
Reducer
0.39
300
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Right Angle Shaft
（Performance
Table/Dimension）
Water-resistant,
Outdoor
Gearmotor
with Brake
0.20
200
21.5
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
1：2
100
37.2
37.2
37.2
36.3
36.3
36.3
32.3
28.4
26.5
24.5
23.5
16.7
10.8
｛3.8｝｛3.8｝｛3.8｝｛3.7｝｛3.7｝｛3.6｝｛3.3｝｛2.9｝｛2.7｝｛2.5｝｛2.4｝｛1.7｝｛1.1｝
S-Type
Reducer
Reduce
（Double Shaft）
0.08
50
Allowable Torque on
X and Y Shaft
（N・m）
｛kgf・m｝
Reducer
（Double Shaft）
Gearmotor
with Brake
20
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Spec.
Designation
Technical
Information
Standard
Motors
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
Technical
Information
P.G32∼G35
G17
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ19
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
1：1
KNB-191
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
0.03
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
KNB-192
2.67
3.30
KNC-192
2500
4.40
3600
4.40
0.07
0.14
0.27
0.40
0.53
0.78
1.15
1.50
1.85
Fig.G-15
4.40
2.20
2.17
KNB-191 HH1022
KNB-191 HH1025
KNB-192 HH1022
KNB-192 HH1025
180
φ19h6
56
Fig.G-13
KNB-191 HH1033
KNB-191 HH1034
KNB-192 HH1033
KNB-192 HH1034
Fig.G-14
CAD data：
KNB-192-HH104
193
6
Y Shaft
38 27
76
154
125
4-φ10.5
10kg
125
154
14.5
53
53.5
38
27
76
53.5
Dimension
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Round Weight
77
21.5
154 125
21.5
φ19h6
257
4-φ10.5
180
17
φ66
38
27
Cautions
for Safety
6
4-φ10.5
117.5
27
Round Weight
X Shaft
φ19h6
21.5
Round Weight
10kg
KNB-192
φ18h6
20.5
Model Code
P.G14
S-Type
Reducer
CAD data：
KNB-191-HU203
CAD data：
KNB-192-HU203
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
56
S-Type
Reducer
53
Performance Table/
Dimension
X Shaft
180
21.5
6
76
38
27
125
154
Water-Resistant,
Outdoor
Gearmotor
with Brake
17
53.5
Gearmotor
with Brake
256
φ19h6
Y Shaft
Round Weight
10kg
Dimension
A
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Type
10kg
Dimension
A
B
125
154
76
4-φ10.5
14.5
125
154
Reducer
S-Type
Reducer
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Round Weight
●
●
10kg
Dimension
A
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Type
(Notes)
B
Option
KNB-191
20.5
6
4-φ10.5
Type
17
φA
6
B
21.5
53.5
180
38
A
φ18h6
257
X Shaft
φA
6
Type
KNB-192
Reduce
（Double Shaft）
φ66
256
Y Shaft
125
154
21.5
77
φA
38 27
17
φ66
Dimension
116
53
X Shaft
77
B
GT-STEP
Index
Gearmotor
56
φ19h6
14.5
B
φ19h6
6
φ66
Y Shaft
A
KNB-191
193
76
125 154
Dimension
KNB-191 HU2033
KNB-191 HU2034
KNB-192 HU2033
KNB-192 HU2034
CAD data：
KNB-192-HU204
38
27
38
27
φ19h6
6
Y Shaft
53
Water-resistant,
Outdoor
Gearmotor
with Brake
B
116
φA
38 27
CAD data：
KNB-192-HH103
10kg
Fig.G-18
193
77
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Clutch
/Brake
Type
CAD data：
KNB-191-HU204
S-Type
Reducer
Gearmotor
with Brake
125
154
6
A
KNB-191 HU2043
KNB-191 HU2044
KNB-192 HU2043
KNB-192 HU2044
129
14.5
40
21.5
180
154
125
4-φ10.5
Y Shaft
125
154
17
116
129
116
φ19h6
125
154
191
76
17
φA
φ66
6
X Shaft
192
193
116
φA
116
B
CAD data：
KNB-191-HH103
Water-resistant,
Outdoor
Gearmotor
with Brake
Reducer
（Double Shaft）
75
φ66
38
27
Fig.G-17
Gearmotor
with Brake
B
X Shaft
Round Weight
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with
Clutch/Brake
53
38
27
6
CAD data：
KNB-191-HH104
CAD data：
KNB-192-HH105
56
53
B
KNB-191 HH1043
KNB-191 HH1044
KNB-192 HH1043
KNB-192 HH1044
CAD data：
KNB-191-HH105
180
Type
●
●
●
●
●
●
●
CAD data：
KNB-192-HH102
77
25.5
25.5
25.5
25.5
24.5
24.5
24.5
23.5
23.5
16.7
10.8
25.5
22.5
｛2.6｝｛2.6｝｛2.6｝｛2.6｝｛2.6｝｛2.5｝｛2.5｝｛2.5｝｛2.4｝｛2.4｝｛2.3｝｛1.7｝｛1.1｝
1760 1760 1760 1760 1760 1720 1670 1470 1270 1080
833
784
980
｛180｝｛180｝｛180｝｛180｝｛180｝｛175｝｛170｝｛150｝｛130｝｛110｝｛100｝｛85｝｛80｝
KNB-191 HH1052
KNB-191 HH1055
KNB-192 HH1052
KNB-192 HH1055
Fig.G-16
257
2.20
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
CAD data：
KNB-191-HH102
257
6
(Notes)
117.5
G16
3.95
1800
1180 1180 1180 1180 1180 1130 1130 1080 1080
882
784
735
833
｛120｝｛120｝｛120｝｛120｝｛120｝｛115｝｛115｝｛110｝｛110｝｛90｝｛85｝｛80｝｛75｝
Technical
Information
KOMPASS
Gearbox
1500
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
S-Type
Reducer
Standard
Motors
2.05
1200
1960 1960 1960 1960 1960 1810 1470 1180 1030
980
931
784
735
｛200｝｛200｝｛200｝｛200｝｛200｝｛185｝｛150｝｛120｝｛105｝｛100｝｛95｝｛80｝｛75｝
Gearmotor
with Brake
Reducer
1.50
900
38 27
Performance Table/
Dimension
Water-Resistant,
Outdoor
Gearmotor
with Brake
1.15
600
1760 1760 1760 1760 1670 1620 1270 1080
882
833
784
686
637
｛180｝｛180｝｛180｝｛180｝｛170｝｛165｝｛130｝｛110｝｛90｝｛85｝｛80｝｛70｝｛65｝
KNC-191
Reduce
（Double Shaft）
S-Type
Reducer
0.77
400
77
Gearmotor
with Clutch
/Brake
S-Type
Reducer
0.39
300
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Right Angle Shaft
（Performance
Table/Dimension）
Water-resistant,
Outdoor
Gearmotor
with Brake
0.20
200
21.5
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
1：2
100
37.2
37.2
37.2
36.3
36.3
36.3
32.3
28.4
26.5
24.5
23.5
16.7
10.8
｛3.8｝｛3.8｝｛3.8｝｛3.7｝｛3.7｝｛3.6｝｛3.3｝｛2.9｝｛2.7｝｛2.5｝｛2.4｝｛1.7｝｛1.1｝
S-Type
Reducer
Reduce
（Double Shaft）
0.08
50
Allowable Torque on
X and Y Shaft
（N・m）
｛kgf・m｝
Reducer
（Double Shaft）
Gearmotor
with Brake
20
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Spec.
Designation
Technical
Information
Standard
Motors
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
Techincal
Information
P.G32∼G35
G17
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ19
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
KNB-191 HD5043
KNB-191 HD5044
KNB-192 HD5043
KNB-192 HD5044
Fig.G-19
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
193
77
38
27
53
116
21.5
70
6
250
Water-resistant,
Outdoor
Gearmotor
with Brake
116
70
17
φ66
38 27
X Shaft
φA
53.5
125
154
6
125
154
53.5
56
116
φA
φ66
6
180
76
116
17
17
117.5
232
6
X Shaft
38 27
4-φ10.5
X Shaft
Gearmotor
with Brake
125
154
125
154
φA
Right Angle Shaft
（Performance
Table/Dimension）
40
φ19h6
X Shaft
Water-resistant,
Outdoor
Gearmotor
with Brake
6
6
21.5
B
Gearmotor
with Brake
S-Type
Reducer
Gearmotor
with Clutch
/Brake
Round Weight
10kg
Dimension
A
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Type
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Water-resistant,
Outdoor
Gearmotor
with Brake
Reducer
（Double Shaft）
Gearmotor
with Clutch
/Brake
S-Type
Reducer
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
38
27
77
4-φ10.5
B
53
Y Shaft
257
38 27
CAD data：
KNC-192-HH125
Parallel Shaft
（Performance
Table/Dimension）
B
Y Shaft
125
154
14.5
38 27
21.5
φ19h6
125 154
6
B
38
27
76
CAD data：
KNC-191-HH125
180
φ19h6
129
53
φ66
X Shaft
φA
6
77
Y Shaft
104
125
154
21.5
257
180
4-φ10.5
KNC-191 HH1252
KNC-191 HH1255
KNC-192 HH1252
KNC-192 HH1255
Fig.G-22
CAD data：
KNC-192-HH134
53.5
φ19h6
250
104
CAD data：
KNC-191-HH134
116
154
125
38
27
6
76
Y Shaft
180
4-φ10.5
φ66
14.5
53
53.5
φ19h6
76
KNC-191 HH1343
KNC-191 HH1344
KNC-192 HH1343
KNC-192 HH1344
232
38
27
38 27
Gearmotor
with Brake
CAD data：
KNB-192-HD503
56
77
Fig.G-21
21.5
S-Type
Reducer
17
CAD data：
KNB-191-HD503
6
Y Shaft
Right Angle Shaft
（Performance
Table/Dimension）
Fig.G-20
193
21.5
φ19h6
Reducer
（Double Shaft）
KNB-191 HD5033
KNB-191 HD5034
KNB-192 HD5033
KNB-192 HD5034
CAD data：
KNB-192-HD504
56
116
Gearmotor
with
Clutch/Brake
CAD data：
KNB-191-HD504
KNC Type
Round Weight
10kg
Dimension
A
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Type
Round Weight
(Notes)
●
●
Dimension
A
B
KNC-191
φ19h6
21.5
KNC-192
φ18h6
20.5
Type
Fig.G-23
Water-resistant,
Outdoor
Gearmotor
with Brake
10kg
KNC-191 HU2343
KNC-191 HU2344
KNC-192 HU2343
KNC-192 HU2344
Round Weight
CAD data：
KNC-191-HU234
B
φ19h6
21.5
KNC-192
φ18h6
20.5
232
116
6
116
116
φA
56
21.5
53
6
X Shaft
53
70
21.5
21.5
Water-Resistant,
Outdoor
Gearmotor
with Brake
6
38
27
38
27
76
250
φ19h6
φ19h6
Y Shaft
Reducer
125
154
Technical
Information
X Shaft
φA
53.5
125
154
6
53.5
Round Weight
10kg
Dimension
125
154
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
125
154
Reducer
S-Type
Reducer
B
KNC-191
φ19h6
21.5
KNC-192
φ18h6
20.5
Round Weight
10kg
Dimension
A
B
KNC-191
φ19h6
21.5
KNC-192
φ18h6
20.5
Type
Technical
Information
Standard
Motors
Cautions
for Safety
(Notes)
●
●
Option
Water-Resistant,
Outdoor
Gearmotor
with Brake
B
A
Type
Cautions
for Safety
76
4-φ10.5
53.5
104
38 27
6
Y Shaft
S-Type
Reducer
Standard
Motors
φ66
17
53.5
180
4-φ10.5
17
256
21.5
Gearmotor
with Brake
S-Type
Reducer
6
Y Shaft
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Reduce
（Double Shaft）
180
Gearmotor
with Brake
S-Type
Reducer
CAD data：
KNC-192-HD534
38
27
φ19h6
Y Shaft
φ66
Reduce
（Double Shaft）
CAD data：
KNC-191-HD534
56
116
38
27
φ19h6
38 27
Performance Table/
Dimension
A
KNC-191
KNC-191 HD5343
KNC-191 HD5344
KNC-192 HD5343
KNC-192 HD5344
CAD data：
KNC-192-HU234
232
S-Type
Reducer
10kg
Fig.G-24
B
Reduce
（Double Shaft）
Dimension
Type
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G18
Model Code
P.G14
Technical
Information
P.G32∼G35
Model Code
P.G14
Technical
Information
P.G32∼G35
G19
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ19
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
KNB-191 HD5043
KNB-191 HD5044
KNB-192 HD5043
KNB-192 HD5044
Fig.G-19
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
193
77
38
27
53
116
21.5
70
6
250
Water-resistant,
Outdoor
Gearmotor
with Brake
116
70
17
φ66
38 27
X Shaft
φA
53.5
125
154
6
125
154
53.5
56
116
φA
φ66
6
180
76
116
17
17
117.5
232
6
X Shaft
38 27
4-φ10.5
X Shaft
Gearmotor
with Brake
125
154
125
154
φA
Right Angle Shaft
（Performance
Table/Dimension）
40
φ19h6
X Shaft
Water-resistant,
Outdoor
Gearmotor
with Brake
6
6
21.5
B
Gearmotor
with Brake
S-Type
Reducer
Gearmotor
with Clutch
/Brake
Round Weight
10kg
Dimension
A
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Type
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Water-resistant,
Outdoor
Gearmotor
with Brake
Reducer
（Double Shaft）
Gearmotor
with Clutch
/Brake
S-Type
Reducer
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
38
27
77
4-φ10.5
B
53
Y Shaft
257
38 27
CAD data：
KNC-192-HH125
Parallel Shaft
（Performance
Table/Dimension）
B
Y Shaft
125
154
14.5
38 27
21.5
φ19h6
125 154
6
B
38
27
76
CAD data：
KNC-191-HH125
180
φ19h6
129
53
φ66
X Shaft
φA
6
77
Y Shaft
104
125
154
21.5
257
180
4-φ10.5
KNC-191 HH1252
KNC-191 HH1255
KNC-192 HH1252
KNC-192 HH1255
Fig.G-22
CAD data：
KNC-192-HH134
53.5
φ19h6
250
104
CAD data：
KNC-191-HH134
116
154
125
38
27
6
76
Y Shaft
180
4-φ10.5
φ66
14.5
53
53.5
φ19h6
76
KNC-191 HH1343
KNC-191 HH1344
KNC-192 HH1343
KNC-192 HH1344
232
38
27
38 27
Gearmotor
with Brake
CAD data：
KNB-192-HD503
56
77
Fig.G-21
21.5
S-Type
Reducer
17
CAD data：
KNB-191-HD503
6
Y Shaft
Right Angle Shaft
（Performance
Table/Dimension）
Fig.G-20
193
21.5
φ19h6
Reducer
（Double Shaft）
KNB-191 HD5033
KNB-191 HD5034
KNB-192 HD5033
KNB-192 HD5034
CAD data：
KNB-192-HD504
56
116
Gearmotor
with
Clutch/Brake
CAD data：
KNB-191-HD504
KNC Type
Round Weight
10kg
Dimension
A
B
KNB-191
φ19h6
21.5
KNB-192
φ18h6
20.5
Type
Round Weight
(Notes)
●
●
Dimension
A
B
KNC-191
φ19h6
21.5
KNC-192
φ18h6
20.5
Type
Fig.G-23
Water-resistant,
Outdoor
Gearmotor
with Brake
10kg
KNC-191 HU2343
KNC-191 HU2344
KNC-192 HU2343
KNC-192 HU2344
Round Weight
CAD data：
KNC-191-HU234
B
φ19h6
21.5
KNC-192
φ18h6
20.5
232
116
6
116
116
φA
56
21.5
53
6
X Shaft
53
70
21.5
21.5
Water-Resistant,
Outdoor
Gearmotor
with Brake
6
38
27
38
27
76
250
φ19h6
φ19h6
Y Shaft
Reducer
125
154
Technical
Information
X Shaft
φA
53.5
125
154
6
53.5
Round Weight
10kg
Dimension
125
154
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
125
154
Reducer
S-Type
Reducer
B
KNC-191
φ19h6
21.5
KNC-192
φ18h6
20.5
Round Weight
10kg
Dimension
A
B
KNC-191
φ19h6
21.5
KNC-192
φ18h6
20.5
Type
Technical
Information
Standard
Motors
Cautions
for Safety
(Notes)
●
●
Option
Water-Resistant,
Outdoor
Gearmotor
with Brake
B
A
Type
Cautions
for Safety
76
4-φ10.5
53.5
104
38 27
6
Y Shaft
S-Type
Reducer
Standard
Motors
φ66
17
53.5
180
4-φ10.5
17
256
21.5
Gearmotor
with Brake
S-Type
Reducer
6
Y Shaft
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Reduce
（Double Shaft）
180
Gearmotor
with Brake
S-Type
Reducer
CAD data：
KNC-192-HD534
38
27
φ19h6
Y Shaft
φ66
Reduce
（Double Shaft）
CAD data：
KNC-191-HD534
56
116
38
27
φ19h6
38 27
Performance Table/
Dimension
A
KNC-191
KNC-191 HD5343
KNC-191 HD5344
KNC-192 HD5343
KNC-192 HD5344
CAD data：
KNC-192-HU234
232
S-Type
Reducer
10kg
Fig.G-24
B
Reduce
（Double Shaft）
Dimension
Type
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G18
Model Code
P.G14
Technical
Information
P.G32∼G35
Model Code
P.G14
Technical
Information
P.G32∼G35
G19
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ25
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
1：1
KNB-251
KNC-251
S-Type
Reducer
Water-resistant,
Outdoor
Gearmotor
with Brake
KNB-252
KNC-252
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
100
200
300
400
600
900
1200
1500
1800
2500
3600
0.25
0.62
1.24
2.47
3.68
4.70
6.40
8.60
10.5
12.3
13.8
―
―
3920 3920 3920 3920 3630 3330 2940 2450 2160 1960 1760
｛400｝｛400｝｛400｝｛400｝｛370｝｛340｝｛300｝｛250｝｛220｝｛200｝｛180｝
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
4120 4120 4120 4120 4020 3920 3430 2940 2550 2450 2250
｛420｝｛420｝｛420｝｛420｝｛410｝｛400｝｛350｝｛300｝｛260｝｛250｝｛230｝
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
0.09
0.23
0.45
0.90
1.34
1.78
2.67
4.00
Fig.G-25
φ25h6
50 40
94
222
68
85.3
85.3
85.3
85.3
84.3
84.3
84.3
84.3
80.4
56.8
85.3
79.4
｛8.7｝｛8.7｝｛8.7｝｛8.7｝｛8.7｝｛8.6｝｛8.6｝｛8.6｝｛8.6｝｛8.2｝｛8.1｝｛5.8｝
X Shaft
12
259
4-φ14
50 40
8
X Shaft
φ25h6
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
4120 4120 4120 4120 4020 3920 3820 3720 3430 3040 2650 2350
｛420｝｛420｝｛420｝｛420｝｛410｝｛400｝｛390｝｛380｝｛350｝｛310｝｛270｝｛240｝
―
φ82.5
152
188
17kg
Round Weight
KNB-251 HH1043
KNB-251 HH1044
KNB-252 HH1043
KNB-252 HH1044
CAD data：
KNB-25-HH104
KNB-251 HH1033
KNB-251 HH1034
KNB-252 HH1033
KNB-252 HH1034
Fig.G-26
KNB-251 HU2043
KNB-251 HU2044
KNB-252 HU2043
KNB-252 HU2044
Fig.G-29
8
259
102
157
φ25h6
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
28
Round Weight
Gearmotor
with Clutch
/Brake
17kg
50 40
50
40
90
68
28
28
94
φ25h6
8
65
94
φ25h6
65
Water-Resistant,
Outdoor
Gearmotor
with Brake
X Shaft
Reduce
（Double Shaft）
222
26
90
152
188
81
222
312
28
28
8
50
φ25h6 40
312
8
90
90
Y Shaft
Round Weight
17kg
Round Weight
26
152
188
81
152
188
4-φ14
152
188
8
Reducer
Y Shaft
316
S-Type
Reducer
222
4-φ14
50 40
316
φ92
50 40
X Shaft
φ25h6
8
Fig.G-31
146
20
X Shaft
259
102
φ25h6
8
28
Round Weight
KNB-251 HD5043
KNB-251 HD5044
KNB-252 HD5043
KNB-252 HD5044
222
4-φ14
20
φ92
146
Round Weight
CAD data：
KNB-25-HD504
68
157
50
40
28
17kg
259
157
85.5
90
307.5
20
50 40
26
8 φ25h6
85.5
152
188
P.G32∼G35
222
4-φ14
φ92
81
132
26
152
188
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
X Shaft
φ25h6
8
Technical
Information
307.5
20
152
188
8
28
Round Weight
Cautions
for Safety
Option
90
Y Shaft
50 40
81
152
188
Standard
Motors
65
50
40
132
X Shaft
φ25h6
S-Type
Reducer
Technical
Information
68
102
222
4-φ14
φ92
KOMPASS
Gearbox
28
CAD data：
KNB-25-HD503
8
Y Shaft
GT-STEP
Index
Gearmotor
KNB-251 HD5033
KNB-251 HD5034
KNB-252 HD5033
KNB-252 HD5034
Fig.G-32
65
28
φ25h6
17kg
Option
Model Code
P.G14
Performance Table/
Dimension
Water-Resistant,
Outdoor
Gearmotor
with Brake
17kg
152 188
Y Shaft
S-Type
Reducer
Gearmotor
with Brake
20
4-φ14
S-Type
Reducer
Gearmotor
with Brake
φ92
50
40
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
28
68
20
50
40
188 152
102
φ25h6
50 40
φ25h6
65
8
259
X Shaft
CAD data：
KNB-25-HH103
155
26
Fig.G-30
CAD data：
KNB-25-HU203
28
Y Shaft
188
152
81
KNB-251 HU2033
KNB-251 HU2034
KNB-252 HU2033
KNB-252 HU2034
φ92
157
155
65
81
CAD data：
KNB-25-HU204
157
259
157
Water-Resistant,
Outdoor
Gearmotor
with Brake
G20
Right Angle Shaft
（Performance
Table/Dimension）
8
12
S-Type
Reducer
157
φ82.5
152
188
152
188
4-φ14
259
90
67
Y Shaft
90
20
152
188
Reducer
（Double Shaft）
8
20
28
φ25h6
102
28
φ25h6
157
50
40
―
―
Gearmotor
with
Clutch/Brake
φ92
Y Shaft
―
7.50
Water-resistant,
Outdoor
Gearmotor
with Brake
65
50
40
65
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
68
―
3920 3920 3920 3920 3920 3720 3630 3530 3230 2740 2250 1670
｛400｝｛400｝｛400｝｛400｝｛400｝｛380｝｛370｝｛360｝｛330｝｛280｝｛230｝｛170｝
188
152
26
Cautions
for Safety
316
CAD data：
KNB-25-HH105
222
―
―
KNB-251 HH1052
KNB-251 HH1055
KNB-252 HH1052
KNB-252 HH1055
Fig.G-28
28
8
φ92
259
Standard
Motors
7.50
―
CAD data：
KNB-25-HH102
316
94
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
102
Gearmotor
with Brake
Technical
Information
6.33
Fig.G-27
―
●
●
●
●
●
●
●
Performance Table/
Dimension
Reducer
5.30
―
KNB-251 HH1022
KNB-251 HH1025
KNB-252 HH1022
KNB-252 HH1025
(Notes)
Reduce
（Double Shaft）
S-Type
Reducer
50
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Allowable Transfer
Capacity (kW)
Right Angle Shaft
（Performance
Table/Dimension）
1：2
20
Allowable Torque on
118
118
118
118
116
112
101
91.1
83.3
78.4
73.5
X and Y Shaft
｛12.0｝｛12.0｝｛12.0｝｛11.8｝｛11.4｝｛10.3｝｛9.3｝｛8.5｝｛8.0｝｛7.5｝
（N・m）
｛kgf・m｝｛12.0｝
Reducer
（Double Shaft）
Gearmotor
with Brake
Spec.
Designation
28
17kg
1 The sizes of oil plug are PF1/2 for intake and PT1/4 for vent.
(Notes) ●
Round Weight
17kg
●
(Standard Specification)
G21
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ25
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
1：1
KNB-251
KNC-251
S-Type
Reducer
Water-resistant,
Outdoor
Gearmotor
with Brake
KNB-252
KNC-252
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
100
200
300
400
600
900
1200
1500
1800
2500
3600
0.25
0.62
1.24
2.47
3.68
4.70
6.40
8.60
10.5
12.3
13.8
―
―
3920 3920 3920 3920 3630 3330 2940 2450 2160 1960 1760
｛400｝｛400｝｛400｝｛400｝｛370｝｛340｝｛300｝｛250｝｛220｝｛200｝｛180｝
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
4120 4120 4120 4120 4020 3920 3430 2940 2550 2450 2250
｛420｝｛420｝｛420｝｛420｝｛410｝｛400｝｛350｝｛300｝｛260｝｛250｝｛230｝
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
0.09
0.23
0.45
0.90
1.34
1.78
2.67
4.00
Fig.G-25
φ25h6
50 40
94
222
68
85.3
85.3
85.3
85.3
84.3
84.3
84.3
84.3
80.4
56.8
85.3
79.4
｛8.7｝｛8.7｝｛8.7｝｛8.7｝｛8.7｝｛8.6｝｛8.6｝｛8.6｝｛8.6｝｛8.2｝｛8.1｝｛5.8｝
X Shaft
12
259
4-φ14
50 40
8
X Shaft
φ25h6
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
4120 4120 4120 4120 4020 3920 3820 3720 3430 3040 2650 2350
｛420｝｛420｝｛420｝｛420｝｛410｝｛400｝｛390｝｛380｝｛350｝｛310｝｛270｝｛240｝
―
φ82.5
152
188
17kg
Round Weight
KNB-251 HH1043
KNB-251 HH1044
KNB-252 HH1043
KNB-252 HH1044
CAD data：
KNB-25-HH104
KNB-251 HH1033
KNB-251 HH1034
KNB-252 HH1033
KNB-252 HH1034
Fig.G-26
KNB-251 HU2043
KNB-251 HU2044
KNB-252 HU2043
KNB-252 HU2044
Fig.G-29
8
259
102
157
φ25h6
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
28
Round Weight
Gearmotor
with Clutch
/Brake
17kg
50 40
50
40
90
68
28
28
94
φ25h6
8
65
94
φ25h6
65
Water-Resistant,
Outdoor
Gearmotor
with Brake
X Shaft
Reduce
（Double Shaft）
222
26
90
152
188
81
222
312
28
28
8
50
φ25h6 40
312
8
90
90
Y Shaft
Round Weight
17kg
Round Weight
26
152
188
81
152
188
4-φ14
152
188
8
Reducer
Y Shaft
316
S-Type
Reducer
222
4-φ14
50 40
316
φ92
50 40
X Shaft
φ25h6
8
Fig.G-31
146
20
X Shaft
259
102
φ25h6
8
28
Round Weight
KNB-251 HD5043
KNB-251 HD5044
KNB-252 HD5043
KNB-252 HD5044
222
4-φ14
20
φ92
146
Round Weight
CAD data：
KNB-25-HD504
68
157
50
40
28
17kg
259
157
85.5
90
307.5
20
50 40
26
8 φ25h6
85.5
152
188
P.G32∼G35
222
4-φ14
φ92
81
132
26
152
188
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
X Shaft
φ25h6
8
Techincal
Information
307.5
20
152
188
8
28
Round Weight
Cautions
for Safety
Option
90
Y Shaft
50 40
81
152
188
Standard
Motors
65
50
40
132
X Shaft
φ25h6
S-Type
Reducer
Technical
Information
68
102
222
4-φ14
φ92
KOMPASS
Gearbox
28
CAD data：
KNB-25-HD503
8
Y Shaft
GT-STEP
Index
Gearmotor
KNB-251 HD5033
KNB-251 HD5034
KNB-252 HD5033
KNB-252 HD5034
Fig.G-32
65
28
φ25h6
17kg
Option
Model Code
P.G14
Performance Table/
Dimension
Water-Resistant,
Outdoor
Gearmotor
with Brake
17kg
152 188
Y Shaft
S-Type
Reducer
Gearmotor
with Brake
20
4-φ14
S-Type
Reducer
Gearmotor
with Brake
φ92
50
40
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
28
68
20
50
40
188 152
102
φ25h6
50 40
φ25h6
65
8
259
X Shaft
CAD data：
KNB-25-HH103
155
26
Fig.G-30
CAD data：
KNB-25-HU203
28
Y Shaft
188
152
81
KNB-251 HU2033
KNB-251 HU2034
KNB-252 HU2033
KNB-252 HU2034
φ92
157
155
65
81
CAD data：
KNB-25-HU204
157
259
157
Water-Resistant,
Outdoor
Gearmotor
with Brake
G20
Right Angle Shaft
（Performance
Table/Dimension）
8
12
S-Type
Reducer
157
φ82.5
152
188
152
188
4-φ14
259
90
67
Y Shaft
90
20
152
188
Reducer
（Double Shaft）
8
20
28
φ25h6
102
28
φ25h6
157
50
40
―
―
Gearmotor
with
Clutch/Brake
φ92
Y Shaft
―
7.50
Water-resistant,
Outdoor
Gearmotor
with Brake
65
50
40
65
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
68
―
3920 3920 3920 3920 3920 3720 3630 3530 3230 2740 2250 1670
｛400｝｛400｝｛400｝｛400｝｛400｝｛380｝｛370｝｛360｝｛330｝｛280｝｛230｝｛170｝
188
152
26
Cautions
for Safety
316
CAD data：
KNB-25-HH105
222
―
―
KNB-251 HH1052
KNB-251 HH1055
KNB-252 HH1052
KNB-252 HH1055
Fig.G-28
28
8
φ92
259
Standard
Motors
7.50
―
CAD data：
KNB-25-HH102
316
94
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
102
Gearmotor
with Brake
Technical
Information
6.33
Fig.G-27
―
●
●
●
●
●
●
●
Performance Table/
Dimension
Reducer
5.30
―
KNB-251 HH1022
KNB-251 HH1025
KNB-252 HH1022
KNB-252 HH1025
(Notes)
Reduce
（Double Shaft）
S-Type
Reducer
50
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Allowable Transfer
Capacity (kW)
Right Angle Shaft
（Performance
Table/Dimension）
1：2
20
Allowable Torque on
118
118
118
118
116
112
101
91.1
83.3
78.4
73.5
X and Y Shaft
｛12.0｝｛12.0｝｛12.0｝｛11.8｝｛11.4｝｛10.3｝｛9.3｝｛8.5｝｛8.0｝｛7.5｝
（N・m）
｛kgf・m｝｛12.0｝
Reducer
（Double Shaft）
Gearmotor
with Brake
Spec.
Designation
28
17kg
(Notes) ●
Round Weight
17kg
●
G21
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ25
KNC Type
Parallel Shaft
（Performance
Table/Dimension）
KNC-251 HH1343
KNC-251 HH1344
KNC-252 HH1343
KNC-252 HH1344
Fig.G-33
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
157
28
S-Type
Reducer
8
50
40
50
40 φ25h6
152 188
Y Shaft
Y Shaft
Gearmotor
with Brake
157
Reducer
S-Type
Reducer
CAD data：
KNC-25-HU234
8
157
φ25h6
50 40
Reduce
（Double Shaft）
Water-resistant,
Outdoor
Gearmotor
with Brake
KNC-251 HD5343
KNC-251 HD5344
KNC-252 HD5343
KNC-252 HD5344
Fig.G-36
314
157
68
Gearmotor
with Clutch
/Brake
28
65
8 φ25h6
50
40 φ25h6
18kg
81
4-φ14
307.5
222
4-φ14
φ92
50 40
90
20
Round Weight
85.5
90
132
28
Y Shaft
Y Shaft
152
188
28
Y Shaft
312
81
152
188
152
188
81
152
188
8
28
Round Weight
(Notes) ●
X Shaft
φ25h6
18kg
●
S-Type
Reducer
Gearmotor
with Brake
20
8
81
65
8
Y Shaft
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
50
40 φ25h6
X Shaft
50
φ25h6 40
CAD data：
KNC-25-HD534
68
157
50
40
222
8
Gearmotor
with Brake
φ82.5
152
188
18kg
28
φ92
28
Right Angle Shaft
（Performance
Table/Dimension）
157
28
KNC-251 HU2343
KNC-251 HU2344
KNC-252 HU2343
KNC-252 HU2344
S-Type
Reducer
67
8
Round Weight
314
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
152
188
28
Fig.G-35
12 90
4-φ14
Y Shaft
φ25h6
X Shaft
18kg
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
X Shaft
φ25h6
8
Reduce
（Double Shaft）
Performance Table/
Dimension
146
314
8
20
50 40
Round Weight
28
φ25h6
φ92
20
Reducer
（Double Shaft）
157
40
8
222
50 40
Gearmotor
with
Clutch/Brake
65
50
4-φ14
φ92
Water-resistant,
Outdoor
Gearmotor
with Brake
28
Y Shaft
94
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
68
316
Water-resistant,
Outdoor
Gearmotor
with Brake
S-Type
Reducer
28
CAD data：
KNC-25-HH125
222
φ25h6
90
50 40
Gearmotor
with Brake
S-Type
Reducer
94
155
65
81
φ25h6
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Clutch
/Brake
8
316
157
188
152
81
KNC-251 HH1252
KNC-251 HH1255
KNC-252 HH1252
KNC-252 HH1255
Fig.G-34
314
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
CAD data：
KNC-25-HH134
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G22
Model Code
P.G14
Technical
Information
P.G32∼G35
G23
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ25
KNC Type
Parallel Shaft
（Performance
Table/Dimension）
KNC-251 HH1343
KNC-251 HH1344
KNC-252 HH1343
KNC-252 HH1344
Fig.G-33
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
157
28
S-Type
Reducer
8
50
40
50
40 φ25h6
152 188
Y Shaft
Y Shaft
Gearmotor
with Brake
157
Reducer
S-Type
Reducer
CAD data：
KNC-25-HU234
8
157
φ25h6
50 40
Reduce
（Double Shaft）
Water-resistant,
Outdoor
Gearmotor
with Brake
KNC-251 HD5343
KNC-251 HD5344
KNC-252 HD5343
KNC-252 HD5344
Fig.G-36
314
157
68
Gearmotor
with Clutch
/Brake
28
65
8 φ25h6
50
40 φ25h6
18kg
81
4-φ14
307.5
222
4-φ14
φ92
50 40
90
20
Round Weight
85.5
90
132
28
Y Shaft
Y Shaft
152
188
28
Y Shaft
312
81
152
188
152
188
81
152
188
8
28
Round Weight
(Notes) ●
X Shaft
φ25h6
18kg
●
S-Type
Reducer
Gearmotor
with Brake
20
8
81
65
8
Y Shaft
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
50
40 φ25h6
X Shaft
50
φ25h6 40
CAD data：
KNC-25-HD534
68
157
50
40
222
8
Gearmotor
with Brake
φ82.5
152
188
18kg
28
φ92
28
Right Angle Shaft
（Performance
Table/Dimension）
157
28
KNC-251 HU2343
KNC-251 HU2344
KNC-252 HU2343
KNC-252 HU2344
S-Type
Reducer
67
8
Round Weight
314
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
152
188
28
Fig.G-35
12 90
4-φ14
Y Shaft
φ25h6
X Shaft
18kg
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
X Shaft
φ25h6
8
Reduce
（Double Shaft）
Performance Table/
Dimension
146
314
8
20
50 40
Round Weight
28
φ25h6
φ92
20
Reducer
（Double Shaft）
157
40
8
222
50 40
Gearmotor
with
Clutch/Brake
65
50
4-φ14
φ92
Water-resistant,
Outdoor
Gearmotor
with Brake
28
Y Shaft
94
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
68
316
Water-resistant,
Outdoor
Gearmotor
with Brake
S-Type
Reducer
28
CAD data：
KNC-25-HH125
222
φ25h6
90
50 40
Gearmotor
with Brake
S-Type
Reducer
94
155
65
81
φ25h6
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Clutch
/Brake
8
316
157
188
152
81
KNC-251 HH1252
KNC-251 HH1255
KNC-252 HH1252
KNC-252 HH1255
Fig.G-34
314
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
CAD data：
KNC-25-HH134
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G22
Model Code
P.G14
Techincal
Information
P.G32∼G35
G23
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ32
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
1：1
KNB-321
KNC-321
S-Type
Reducer
Water-resistant,
Outdoor
Gearmotor
with Brake
KNB-322
KNC-322
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
200
300
400
600
900
1200
1500
1800
2500
3600
0.36
0.88
1.77
3.53
5.26
6.72
9.15
12.3
15.0
17.5
19.7
―
―
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
5190 5190 5190 5190 5100 4900 4310 3720 3230 3140 2840
｛530｝｛530｝｛530｝｛530｝｛520｝｛500｝｛440｝｛380｝｛330｝｛320｝｛290｝
0.13
1.91
2.54
3.80
5.72
7.57
9.05
340
98
―
―
77
55 50
―
―
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
5190 5190 5190 5190 5100 4900 4800 4700 4310 3820 3330
｛530｝｛530｝｛530｝｛530｝｛520｝｛500｝｛490｝｛480｝｛440｝｛390｝｛340｝
―
―
55 50
100
68
φ32h6
20
4-φ14
4-φ14
Y Shaft
φ88.5
160
196
9
Water-resistant,
Outdoor
Gearmotor
with Brake
35
10
22kg
Gearmotor
with Clutch
/Brake
22kg
Round Weight
KNB-321 HU2043
KNB-321 HU2044
KNB-322 HU2043
KNB-322 HU2044
Fig.G-41
35
CAD data：
KNB-32-HU204
KNB-321 HU2033
KNB-321 HU2034
KNB-322 HU2033
KNB-322 HU2034
Fig.G-42
10
109
77
168
X Shaft
109
φ32h6
55 50
φ100
KNB-321 HH1043
KNB-321 HH1044
KNB-322 HH1043
KNB-322 HH1044
Fig.G-37
CAD data：
KNB-32-HH104
KNB-321 HH1033
KNB-321 HH1034
KNB-322 HH1033
KNB-322 HH1034
Fig.G-38
277
109
CAD data：
KNB-32-HH103
168
174
74
88
55
50
100
88
35
35
98
φ32h6
196 160
29
10
74
29
100
242
55 50
340
242
φ100
55 50
X Shaft
φ32h6
10
160
196
160
196
88
162
20
X Shaft
4-φ14
160
196
Round Weight
CAD data：
KNB-32-HD504
KNB-321 HD5033
KNB-321 HD5034
KNB-322 HD5033
KNB-322 HD5034
Fig.G-44
55
50
74
35
φ32h6
168
92.5
100
334.5
20
29
10
92.5
160
196
88
P.G32∼G35
GT-STEP
Index
Gearmotor
142
KOMPASS
Gearbox
X Shaft
160
196
10
φ32h6
29
160
196
10
35
Round Weight
242
4-φ14
φ100
55 50
88
334.5
20
142
φ32h6
Cautions
for Safety
Option
100
φ32h6
X Shaft
160
196
Standard
Motors
74
55
50
242
4-φ14
55 50
35
Y Shaft
φ100
KOMPASS
Gearbox
Technical
Information
77
109
S-Type
Reducer
10
Y Shaft
GT-STEP
Index
Gearmotor
CAD data：
KNB-32-HD503
277
77
168
22kg
Technical
Information
Performance Table/
Dimension
Water-Resistant,
Outdoor
Gearmotor
with Brake
22kg
277
109
Option
Model Code
P.G14
29
S-Type
Reducer
Gearmotor
with Brake
20
Round Weight
KNB-321 HD5043
KNB-321 HD5044
KNB-322 HD5043
KNB-322 HD5044
35
22kg
100
φ32h6
Y Shaft
22kg
Fig.G-43
φ32h6
10
35
Round Weight
10
342
100
4-φ14
88
55
50
Reducer
4-φ14
20
φ100
162
160
196
Round Weight
Y Shaft
4-φ14
Reduce
（Double Shaft）
160 196
340
S-Type
Reducer
X Shaft
10
Y Shaft
98
φ32h6
35
20
174
55
50
10
342
35
φ32h6
109
196
160
Water-Resistant,
Outdoor
Gearmotor
with Brake
74
242
55
50
277
168
196
160
77
φ100
242
S-Type
Reducer
Gearmotor
with Brake
277
74
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
10
168
φ32h6
55 50
CAD data：
KNB-32-HU203
35
277
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
φ88.5
160
196
160
196
S-Type
Reducer
168
20
10
X Shaft
160
196
277
100
9
277
φ32h6
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
10
X Shaft
35
φ100
Round Weight
φ32h6
168
55
50
109
35
φ100
―
●
●
●
●
●
●
●
Y Shaft
G24
Water-resistant,
Outdoor
Gearmotor
with Brake
74
55
50
Y Shaft
―
4900 4900 4900 4900 4900 4700 4610 4410 4120 3430 2840
｛500｝｛500｝｛500｝｛500｝｛500｝｛480｝｛470｝｛450｝｛420｝｛350｝｛290｝
Gearmotor
with Brake
77
74
―
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
242
Parallel Shaft
（Performance
Table/Dimension）
CAD data：
KNB-32-HH105
242
φ32h6
―
KNB-321 HH1052
KNB-321 HH1055
KNB-322 HH1052
KNB-322 HH1055
Fig.G-40
340
98
―
10.7
35
―
―
Water-Resistant,
Outdoor
Gearmotor
with Brake
Cautions
for Safety
1.28
―
123
123
123
122
122
121
121
120
115
123
114
｛12.5｝｛12.5｝｛12.5｝｛12.5｝｛12.4｝｛12.4｝｛12.3｝｛12.3｝｛12.2｝｛11.7｝｛11.6｝
29
Standard
Motors
0.64
Fig.G-39
CAD data：
KNB-32-HH102
(Notes)
Gearmotor
with Brake
Technical
Information
0.32
KNB-321 HH1022
KNB-321 HH1025
KNB-322 HH1022
KNB-322 HH1025
10
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
Performance Table/
Dimension
Reducer
100
4900 4900 4900 4900 4610 4210 3720 3140 2740 2450 2160
｛500｝｛500｝｛500｝｛500｝｛470｝｛430｝｛380｝｛320｝｛280｝｛250｝｛220｝
Reduce
（Double Shaft）
S-Type
Reducer
50
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Allowable Transfer
Capacity (kW)
Right Angle Shaft
（Performance
Table/Dimension）
1：2
20
Allowable Torque on 167
167
167
167
165
160
144
130
119
112
104
X and Y Shaft
｛17.0｝｛17.0｝｛17.0｝｛16.8｝｛16.3｝｛14.7｝｛13.3｝｛12.1｝｛11.4｝｛10.6｝
（N・m）
｛kgf・m｝｛17.0｝
Reducer
（Double Shaft）
Gearmotor
with Brake
Spec.
Designation
35
22kg
(Notes) ●
Round Weight
22kg
●
G25
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ32
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
1：1
KNB-321
KNC-321
S-Type
Reducer
Water-resistant,
Outdoor
Gearmotor
with Brake
KNB-322
KNC-322
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
200
300
400
600
900
1200
1500
1800
2500
3600
0.36
0.88
1.77
3.53
5.26
6.72
9.15
12.3
15.0
17.5
19.7
―
―
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
5190 5190 5190 5190 5100 4900 4310 3720 3230 3140 2840
｛530｝｛530｝｛530｝｛530｝｛520｝｛500｝｛440｝｛380｝｛330｝｛320｝｛290｝
0.13
1.91
2.54
3.80
5.72
7.57
9.05
340
98
―
―
77
55 50
―
―
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
5190 5190 5190 5190 5100 4900 4800 4700 4310 3820 3330
｛530｝｛530｝｛530｝｛530｝｛520｝｛500｝｛490｝｛480｝｛440｝｛390｝｛340｝
―
―
55 50
100
68
φ32h6
20
4-φ14
4-φ14
Y Shaft
φ88.5
160
196
9
Water-resistant,
Outdoor
Gearmotor
with Brake
35
10
22kg
Gearmotor
with Clutch
/Brake
22kg
Round Weight
KNB-321 HU2043
KNB-321 HU2044
KNB-322 HU2043
KNB-322 HU2044
Fig.G-41
35
CAD data：
KNB-32-HU204
KNB-321 HU2033
KNB-321 HU2034
KNB-322 HU2033
KNB-322 HU2034
Fig.G-42
10
109
77
168
X Shaft
109
φ32h6
55 50
φ100
KNB-321 HH1043
KNB-321 HH1044
KNB-322 HH1043
KNB-322 HH1044
Fig.G-37
CAD data：
KNB-32-HH104
KNB-321 HH1033
KNB-321 HH1034
KNB-322 HH1033
KNB-322 HH1034
Fig.G-38
277
109
CAD data：
KNB-32-HH103
168
174
74
88
55
50
100
88
35
35
98
φ32h6
196 160
29
10
74
29
100
242
55 50
340
242
φ100
55 50
X Shaft
φ32h6
10
160
196
160
196
88
162
20
X Shaft
4-φ14
160
196
Round Weight
CAD data：
KNB-32-HD504
KNB-321 HD5033
KNB-321 HD5034
KNB-322 HD5033
KNB-322 HD5034
Fig.G-44
55
50
74
35
φ32h6
168
92.5
100
334.5
20
29
10
92.5
160
196
88
P.G32∼G35
GT-STEP
Index
Gearmotor
142
KOMPASS
Gearbox
X Shaft
160
196
10
φ32h6
29
160
196
10
35
Round Weight
242
4-φ14
φ100
55 50
88
334.5
20
142
φ32h6
Cautions
for Safety
Option
100
φ32h6
X Shaft
160
196
Standard
Motors
74
55
50
242
4-φ14
55 50
35
Y Shaft
φ100
KOMPASS
Gearbox
Technical
Information
77
109
S-Type
Reducer
10
Y Shaft
GT-STEP
Index
Gearmotor
CAD data：
KNB-32-HD503
277
77
168
22kg
Techincal
Information
Performance Table/
Dimension
Water-Resistant,
Outdoor
Gearmotor
with Brake
22kg
277
109
Option
Model Code
P.G14
29
S-Type
Reducer
Gearmotor
with Brake
20
Round Weight
KNB-321 HD5043
KNB-321 HD5044
KNB-322 HD5043
KNB-322 HD5044
35
22kg
100
φ32h6
Y Shaft
22kg
Fig.G-43
φ32h6
10
35
Round Weight
10
342
100
4-φ14
88
55
50
Reducer
4-φ14
20
φ100
162
160
196
Round Weight
Y Shaft
4-φ14
Reduce
（Double Shaft）
160 196
340
S-Type
Reducer
X Shaft
10
Y Shaft
98
φ32h6
35
20
174
55
50
10
342
35
φ32h6
109
196
160
Water-Resistant,
Outdoor
Gearmotor
with Brake
74
242
55
50
277
168
196
160
77
φ100
242
S-Type
Reducer
Gearmotor
with Brake
277
74
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
10
168
φ32h6
55 50
CAD data：
KNB-32-HU203
35
277
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
φ88.5
160
196
160
196
S-Type
Reducer
168
20
10
X Shaft
160
196
277
100
9
277
φ32h6
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
10
X Shaft
35
φ100
Round Weight
φ32h6
168
55
50
109
35
φ100
―
●
●
●
●
●
●
●
Y Shaft
G24
Water-resistant,
Outdoor
Gearmotor
with Brake
74
55
50
Y Shaft
―
4900 4900 4900 4900 4900 4700 4610 4410 4120 3430 2840
｛500｝｛500｝｛500｝｛500｝｛500｝｛480｝｛470｝｛450｝｛420｝｛350｝｛290｝
Gearmotor
with Brake
77
74
―
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
242
Parallel Shaft
（Performance
Table/Dimension）
CAD data：
KNB-32-HH105
242
φ32h6
―
KNB-321 HH1052
KNB-321 HH1055
KNB-322 HH1052
KNB-322 HH1055
Fig.G-40
340
98
―
10.7
35
―
―
Water-Resistant,
Outdoor
Gearmotor
with Brake
Cautions
for Safety
1.28
―
123
123
123
122
122
121
121
120
115
123
114
｛12.5｝｛12.5｝｛12.5｝｛12.5｝｛12.4｝｛12.4｝｛12.3｝｛12.3｝｛12.2｝｛11.7｝｛11.6｝
29
Standard
Motors
0.64
Fig.G-39
CAD data：
KNB-32-HH102
(Notes)
Gearmotor
with Brake
Technical
Information
0.32
KNB-321 HH1022
KNB-321 HH1025
KNB-322 HH1022
KNB-322 HH1025
10
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
Performance Table/
Dimension
Reducer
100
4900 4900 4900 4900 4610 4210 3720 3140 2740 2450 2160
｛500｝｛500｝｛500｝｛500｝｛470｝｛430｝｛380｝｛320｝｛280｝｛250｝｛220｝
Reduce
（Double Shaft）
S-Type
Reducer
50
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Allowable Transfer
Capacity (kW)
Right Angle Shaft
（Performance
Table/Dimension）
1：2
20
Allowable Torque on 167
167
167
167
165
160
144
130
119
112
104
X and Y Shaft
｛17.0｝｛17.0｝｛17.0｝｛16.8｝｛16.3｝｛14.7｝｛13.3｝｛12.1｝｛11.4｝｛10.6｝
（N・m）
｛kgf・m｝｛17.0｝
Reducer
（Double Shaft）
Gearmotor
with Brake
Spec.
Designation
35
22kg
(Notes) ●
Round Weight
22kg
●
G25
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ32
KNC Type
Parallel Shaft
（Performance
Table/Dimension）
KNC-321 HH1343
KNC-321 HH1344
KNC-322 HH1343
KNC-322 HH1344
Fig.G-45
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
168
35
340
98
55
50 φ32h6
160 196
100
Y Shaft
Y Shaft
35
Gearmotor
with Brake
242
162
X Shaft
CAD data：
KNC-32-HU234
168
168
φ32h6
77
74
10
X Shaft
φ100
242
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
35
10
φ32h6
55
50
55
50
Y Shaft
20
55 50
100
88
4-φ14
88
160
196
23kg
334.5
242
142
X Shaft
160
196
φ32h6
88
160
196
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
10
Gearmotor
with Brake
23kg
Water-Resistant,
Outdoor
Gearmotor
with Brake
35
Round Weight
(Notes) ●
92.5
Y Shaft
4-φ14
10
S-Type
Reducer
Gearmotor
with Brake
10
35
Y Shaft
Round Weight
35
φ100
20
160
196
74
100
φ32h6
Y Shaft
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
55
50
342
φ32h6
88
CAD data：
KNC-32-HD534
77
168
55
50
φ32h6
55 50
Reduce
（Double Shaft）
35
Right Angle Shaft
（Performance
Table/Dimension）
Water-resistant,
Outdoor
Gearmotor
with Brake
336
336
S-Type
Reducer
Gearmotor
with Clutch
/Brake
KNC-321 HD5343
KNC-321 HD5344
KNC-322 HD5343
KNC-322 HD5344
168
Reducer
（Double Shaft）
Gearmotor
with Brake
23kg
Fig.G-48
10
Water-resistant,
Outdoor
Gearmotor
with Brake
68
φ88.5
160
196
10
Round Weight
35
Gearmotor
with Brake
9 100
168
35
23kg
Fig.G-47
336
10
4-φ14
Y Shaft
φ32h6
160
196
KNC-321 HU2343
KNC-321 HU2344
KNC-322 HU2343
KNC-322 HU2344
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Performance Table/
Dimension
φ32h6
20
55 50
35
Round Weight
Reduce
（Double Shaft）
S-Type
Reducer
168
X Shaft
φ32h6
10
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
35
φ100
20
55 50
74
55
50
10
4-φ14
Water-resistant,
Outdoor
Gearmotor
with Brake
Y Shaft
98
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
77
340
φ100
CAD data：
KNC-32-HH125
242
φ32h6
174
74
88
55
10 φ32h6 50
Right Angle Shaft
（Performance
Table/Dimension）
S-Type
Reducer
10
55 50
S-Type
Reducer
Gearmotor
with Clutch
/Brake
35
168
196
160
88
KNC-321 HH1252
KNC-321 HH1255
KNC-322 HH1252
KNC-322 HH1255
Fig.G-46
336
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
CAD data：
KNC-32-HH134
●
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G26
Model Code
P.G14
Technical
Information
P.G32∼G35
G27
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ32
KNC Type
Parallel Shaft
（Performance
Table/Dimension）
KNC-321 HH1343
KNC-321 HH1344
KNC-322 HH1343
KNC-322 HH1344
Fig.G-45
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
168
35
340
98
55
50 φ32h6
160 196
100
Y Shaft
Y Shaft
35
Gearmotor
with Brake
242
162
X Shaft
CAD data：
KNC-32-HU234
168
168
φ32h6
77
74
10
X Shaft
φ100
242
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
35
10
φ32h6
55
50
55
50
Y Shaft
20
55 50
100
88
4-φ14
88
160
196
23kg
334.5
242
142
X Shaft
160
196
φ32h6
88
160
196
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
10
Gearmotor
with Brake
23kg
Water-Resistant,
Outdoor
Gearmotor
with Brake
35
Round Weight
(Notes) ●
92.5
Y Shaft
4-φ14
10
S-Type
Reducer
Gearmotor
with Brake
10
35
Y Shaft
Round Weight
35
φ100
20
160
196
74
100
φ32h6
Y Shaft
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
55
50
342
φ32h6
88
CAD data：
KNC-32-HD534
77
168
55
50
φ32h6
55 50
Reduce
（Double Shaft）
35
Right Angle Shaft
（Performance
Table/Dimension）
Water-resistant,
Outdoor
Gearmotor
with Brake
336
336
S-Type
Reducer
Gearmotor
with Clutch
/Brake
KNC-321 HD5343
KNC-321 HD5344
KNC-322 HD5343
KNC-322 HD5344
168
Reducer
（Double Shaft）
Gearmotor
with Brake
23kg
Fig.G-48
10
Water-resistant,
Outdoor
Gearmotor
with Brake
68
φ88.5
160
196
10
Round Weight
35
Gearmotor
with Brake
9 100
168
35
23kg
Fig.G-47
336
10
4-φ14
Y Shaft
φ32h6
160
196
KNC-321 HU2343
KNC-321 HU2344
KNC-322 HU2343
KNC-322 HU2344
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Performance Table/
Dimension
φ32h6
20
55 50
35
Round Weight
Reduce
（Double Shaft）
S-Type
Reducer
168
X Shaft
φ32h6
10
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
35
φ100
20
55 50
74
55
50
10
4-φ14
Water-resistant,
Outdoor
Gearmotor
with Brake
Y Shaft
98
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
77
340
φ100
CAD data：
KNC-32-HH125
242
φ32h6
174
74
88
55
10 φ32h6 50
Right Angle Shaft
（Performance
Table/Dimension）
S-Type
Reducer
10
55 50
S-Type
Reducer
Gearmotor
with Clutch
/Brake
35
168
196
160
88
KNC-321 HH1252
KNC-321 HH1255
KNC-322 HH1252
KNC-322 HH1255
Fig.G-46
336
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
CAD data：
KNC-32-HH134
●
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G26
Model Code
P.G14
Techincal
Information
P.G32∼G35
G27
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ40
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
1：1
KNB-401
KNC-401
S-Type
Reducer
Water-resistant,
Outdoor
Gearmotor
with Brake
KNB-402
KNC-402
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
300
400
600
900
1200
1500
1800
2500
3600
0.62
1.59
3.18
6.32
9.50
12.0
16.1
22.0
26.5
―
―
―
―
9800 9800 9800 7840 5880 4900 4410 3720 3430
｛1000｝
｛1000｝
｛1000｝｛800｝｛600｝｛500｝｛450｝｛380｝｛350｝
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
11760 11760 11760 9800 7350 6370 5880 5100 4020
｛1200｝
｛1200｝
｛1200｝
｛1000｝｛750｝｛650｝｛600｝｛520｝｛410｝
0.20
Cautions
for Safety
1.93
2.90
3.84
5.72
8.55
11.0
―
―
43
―
―
―
13.8
―
―
―
―
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
9800 9800 9800 9800 9800 8820 7840 6860 5880 4900 3920
｛1000｝
｛1000｝
｛1000｝
｛1000｝｛900｝｛800｝｛700｝｛600｝｛500｝｛400｝
｛1000｝
―
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
11760 11760 11760 11760 11760 9800 8820 8820 8820 7840 6860
｛1200｝
｛1200｝
｛1200｝
｛1200｝
｛1000｝｛900｝｛900｝｛900｝｛800｝｛700｝
｛1200｝
―
425
88
75 60
75
60
X Shaft
115
φ114.5
195
234
14
12
KNB-401 HU2043
KNB-401 HU2044
KNB-402 HU2043
KNB-402 HU2044
Fig.G-53
43
CAD data：
KNB-40-HU204
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
KNB-401 HU2033
KNB-401 HU2034
KNB-402 HU2033
KNB-402 HU2034
Fig.G-54
12
337
129
75 60
88
85
208
Fig.G-49
CAD data：
KNB-40-HH104
KNB-401 HH1033
KNB-401 HH1034
KNB-402 HH1033
KNB-402 HH1034
Fig.G-50
337
129
31.5
208
200
110.5
85
75
60
110.5
115
43
117
φ40h6
234 195
43
31.5
31.5
115
117
φ40h6
12
85
75
60
12
75 60
425
4-φ14
308
22
φ124
210.5
X Shaft
75 60
Y Shaft
4-φ14
195
234
43
Fig.G-55
210.5
31.5 4-φ14
195
234
110.5
195
234
Water-Resistant,
Outdoor
Gearmotor
with Brake
33kg
Round Weight
Round Weight
CAD data：
KNB-40-HD504
KNB-401 HD5033
KNB-401 HD5034
KNB-402 HD5033
KNB-402 HD5034
Fig.G-56
337
X Shaft
129
88
208
75
60
43
43
φ40h6
33kg
208
110
115
4-φ14
75 60
31.5
43
12
75
60
110
115
4-φ14
308
110.5
110.5
Technical
Information
P.G32∼G35
φ40h6
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
X Shaft
195
234
12
31.5
195
234
12
43
Round Weight
193
75 60
195
234
Option
308
φ124
193
φ40h6
Cautions
for Safety
418
22
Y Shaft
X Shaft
195
234
Standard
Motors
85
φ40h6
418
φ124
KOMPASS
Gearbox
Technical
Information
88
129
S-Type
Reducer
12
22
GT-STEP
Index
Gearmotor
CAD data：
KNB-40-HD503
337
85
Y Shaft
Model Code
P.G14
Gearmotor
with Brake
22
Y Shaft
S-Type
Reducer
Performance Table/
Dimension
115
φ40h6
KNB-401 HD5043
KNB-401 HD5044
KNB-402 HD5043
KNB-402 HD5044
φ40h6
12
33kg
12
115
33kg
Round Weight
423
75
60
12
110.5
22
φ124
φ40h6
12
Round Weight
195
234
43
Reducer
425
308
Reduce
（Double Shaft）
195 234
Y Shaft
4-φ14
43
22
200
X Shaft
423
75
60
φ40h6
129
234
195
Water-Resistant,
Outdoor
Gearmotor
with Brake
85
308
337
208
234
195
88
φ124
308
CAD data：
KNB-40-HH103
S-Type
Reducer
Gearmotor
with Brake
129
φ40h6
75 60
X Shaft
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
12
337
φ124
KNB-401 HH1043
KNB-401 HH1044
KNB-402 HH1043
KNB-402 HH1044
CAD data：
KNB-40-HU203
43
208
φ40h6
Option
G28
Gearmotor
with Brake
33kg
Round Weight
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
93
43
33kg
Round Weight
208
φ114.5
195
234
φ40h6
195
234
4-φ14
22
195
234
4-φ14
22
Y Shaft
75 60
12
337
115
14
337
φ40h6
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
12
43
φ124
―
129
X Shaft
208
75
60
―
Water-resistant,
Outdoor
Gearmotor
with Brake
85
43
φ40h6
φ124
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
88
85
Y Shaft
―
―
308
CAD data：
KNB-40-HH105
308
―
―
16.4
KNB-401 HH1052
KNB-401 HH1055
KNB-402 HH1052
KNB-402 HH1055
Fig.G-52
425
117
―
CAD data：
KNB-40-HH102
117
φ40h6
―
S-Type
Reducer
Standard
Motors
0.96
―
183
183
183
183
182
181
180
174
173
183
172
｛18.7｝｛18.7｝｛18.7｝｛18.7｝｛18.7｝｛18.6｝｛18.5｝｛18.4｝｛17.8｝｛17.6｝｛17.5｝
Y Shaft
Technical
Information
0.48
Fig.G-51
12
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
200
●
●
●
●
●
●
●
Performance Table/
Dimension
Gearmotor
with Brake
100
KNB-401 HH1022
KNB-401 HH1025
KNB-402 HH1022
KNB-402 HH1025
(Notes)
Reduce
（Double Shaft）
S-Type
Reducer
50
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Allowable Transfer
Capacity (kW)
Right Angle Shaft
（Performance
Table/Dimension）
1：2
20
Allowable Torque on
294
294
294
294
294
284
255
231
211
X and Y Shaft
｛30.0｝｛30.0｝｛30.0｝｛30.0｝｛29.0｝｛26.0｝｛23.6｝｛21.5｝
（N・m）
｛kgf・m｝｛30.0｝
Reducer
（Double Shaft）
Gearmotor
with Brake
Spec.
Designation
43
33kg
(Notes) ●
Round Weight
33kg
●
G29
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ40
KNB Type
Parallel Shaft
（Performance
Table/Dimension）
Reduction
Type
Ratio Designation
Gearmotor
with Brake
Allowable Transfer
Capacity (kW)
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
1：1
KNB-401
KNC-401
S-Type
Reducer
Water-resistant,
Outdoor
Gearmotor
with Brake
KNB-402
KNC-402
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
300
400
600
900
1200
1500
1800
2500
3600
0.62
1.59
3.18
6.32
9.50
12.0
16.1
22.0
26.5
―
―
―
―
9800 9800 9800 7840 5880 4900 4410 3720 3430
｛1000｝
｛1000｝
｛1000｝｛800｝｛600｝｛500｝｛450｝｛380｝｛350｝
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
11760 11760 11760 9800 7350 6370 5880 5100 4020
｛1200｝
｛1200｝
｛1200｝
｛1000｝｛750｝｛650｝｛600｝｛520｝｛410｝
0.20
Cautions
for Safety
1.93
2.90
3.84
5.72
8.55
11.0
―
―
43
―
―
―
13.8
―
―
―
―
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
9800 9800 9800 9800 9800 8820 7840 6860 5880 4900 3920
｛1000｝
｛1000｝
｛1000｝
｛1000｝｛900｝｛800｝｛700｝｛600｝｛500｝｛400｝
｛1000｝
―
Allowable O.H.L.
on Y Shaft
（N）
｛kgf｝
11760 11760 11760 11760 11760 9800 8820 8820 8820 7840 6860
｛1200｝
｛1200｝
｛1200｝
｛1200｝
｛1000｝｛900｝｛900｝｛900｝｛800｝｛700｝
｛1200｝
―
425
88
75 60
75
60
X Shaft
115
φ114.5
195
234
14
12
KNB-401 HU2043
KNB-401 HU2044
KNB-402 HU2043
KNB-402 HU2044
Fig.G-53
43
CAD data：
KNB-40-HU204
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
KNB-401 HU2033
KNB-401 HU2034
KNB-402 HU2033
KNB-402 HU2034
Fig.G-54
12
337
129
75 60
88
85
208
Fig.G-49
CAD data：
KNB-40-HH104
KNB-401 HH1033
KNB-401 HH1034
KNB-402 HH1033
KNB-402 HH1034
Fig.G-50
337
129
31.5
208
200
110.5
85
75
60
110.5
115
43
117
φ40h6
234 195
43
31.5
31.5
115
117
φ40h6
12
85
75
60
12
75 60
425
4-φ14
308
22
φ124
210.5
X Shaft
75 60
Y Shaft
4-φ14
195
234
43
Fig.G-55
210.5
31.5 4-φ14
195
234
110.5
195
234
Water-Resistant,
Outdoor
Gearmotor
with Brake
33kg
Round Weight
Round Weight
CAD data：
KNB-40-HD504
KNB-401 HD5033
KNB-401 HD5034
KNB-402 HD5033
KNB-402 HD5034
Fig.G-56
337
X Shaft
129
88
208
75
60
43
43
φ40h6
33kg
208
110
115
4-φ14
75 60
31.5
43
12
75
60
110
115
4-φ14
308
110.5
110.5
Techincal
Information
P.G32∼G35
φ40h6
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
X Shaft
195
234
12
31.5
195
234
12
43
Round Weight
193
75 60
195
234
Option
308
φ124
193
φ40h6
Cautions
for Safety
418
22
Y Shaft
X Shaft
195
234
Standard
Motors
85
φ40h6
418
φ124
KOMPASS
Gearbox
Technical
Information
88
129
S-Type
Reducer
12
22
GT-STEP
Index
Gearmotor
CAD data：
KNB-40-HD503
337
85
Y Shaft
Model Code
P.G14
Gearmotor
with Brake
22
Y Shaft
S-Type
Reducer
Performance Table/
Dimension
115
φ40h6
KNB-401 HD5043
KNB-401 HD5044
KNB-402 HD5043
KNB-402 HD5044
φ40h6
12
33kg
12
115
33kg
Round Weight
423
75
60
12
110.5
22
φ124
φ40h6
12
Round Weight
195
234
43
Reducer
425
308
Reduce
（Double Shaft）
195 234
Y Shaft
4-φ14
43
22
200
X Shaft
423
75
60
φ40h6
129
234
195
Water-Resistant,
Outdoor
Gearmotor
with Brake
85
308
337
208
234
195
88
φ124
308
CAD data：
KNB-40-HH103
S-Type
Reducer
Gearmotor
with Brake
129
φ40h6
75 60
X Shaft
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
12
337
φ124
KNB-401 HH1043
KNB-401 HH1044
KNB-402 HH1043
KNB-402 HH1044
CAD data：
KNB-40-HU203
43
208
φ40h6
Option
G28
Gearmotor
with Brake
33kg
Round Weight
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
93
43
33kg
Round Weight
208
φ114.5
195
234
φ40h6
195
234
4-φ14
22
195
234
4-φ14
22
Y Shaft
75 60
12
337
115
14
337
φ40h6
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
12
43
φ124
―
129
X Shaft
208
75
60
―
Water-resistant,
Outdoor
Gearmotor
with Brake
85
43
φ40h6
φ124
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
88
85
Y Shaft
―
―
308
CAD data：
KNB-40-HH105
308
―
―
16.4
KNB-401 HH1052
KNB-401 HH1055
KNB-402 HH1052
KNB-402 HH1055
Fig.G-52
425
117
―
CAD data：
KNB-40-HH102
117
φ40h6
―
S-Type
Reducer
Standard
Motors
0.96
―
183
183
183
183
182
181
180
174
173
183
172
｛18.7｝｛18.7｝｛18.7｝｛18.7｝｛18.7｝｛18.6｝｛18.5｝｛18.4｝｛17.8｝｛17.6｝｛17.5｝
Y Shaft
Technical
Information
0.48
Fig.G-51
12
Allowable Torque
on Y Shaft
（N・m）
｛kgf・m｝
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
200
●
●
●
●
●
●
●
Performance Table/
Dimension
Gearmotor
with Brake
100
KNB-401 HH1022
KNB-401 HH1025
KNB-402 HH1022
KNB-402 HH1025
(Notes)
Reduce
（Double Shaft）
S-Type
Reducer
50
Allowable O.H.L.
on X Shaft
（N）
｛kgf｝
Allowable Transfer
Capacity (kW)
Right Angle Shaft
（Performance
Table/Dimension）
1：2
20
Allowable Torque on
294
294
294
294
294
284
255
231
211
X and Y Shaft
｛30.0｝｛30.0｝｛30.0｝｛30.0｝｛29.0｝｛26.0｝｛23.6｝｛21.5｝
（N・m）
｛kgf・m｝｛30.0｝
Reducer
（Double Shaft）
Gearmotor
with Brake
Spec.
Designation
43
33kg
(Notes) ●
Round Weight
33kg
●
G29
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ40
KNC Type
Parallel Shaft
（Performance
Table/Dimension）
KNC-401 HH1343
KNC-401 HH1344
KNC-402 HH1343
KNC-402 HH1344
Fig.G-57
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
208
43
12
43
117
208
234
195
110.5
75
60
φ40h6
S-Type
Reducer
Y Shaft
85
43
φ40h6
195 234
Y Shaft
75 60
117
φ40h6
Gearmotor
with Clutch
/Brake
75 60
X Shaft
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
KNC-401 HU2343
KNC-401 HU2344
KNC-402 HU2343
KNC-402 HU2344
CAD data：
KNC-40-HU234
208
43
208
φ40h6
75 60
88
12
85
KNC-401 HD5343
KNC-401 HD5344
KNC-402 HD5343
KNC-402 HD5344
Performance Table/
Dimension
X Shaft
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
75
60
12
75
60
22
43
75 60
22
Round Weight
195
234
34kg
43
110.5
Y Shaft
4-φ14
110.5
195
234
12
418
Y Shaft
4-φ14
195
234
110.5
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
308
195
234
S-Type
Reducer
Performance Table/
Dimension
12
Gearmotor
with Brake
34kg
Water-Resistant,
Outdoor
Gearmotor
with Brake
43
Round Weight
(Notes) ●
110
193
φ40h6
S-Type
Reducer
Gearmotor
with Brake
X Shaft
12
115
φ40h6
Y Shaft
85
φ124
423
75
60
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
115
φ40h6
Y Shaft
φ40h6
110.5
CAD data：
KNC-40-HD534
88
208
75
60
φ40h6
φ124
43
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
308
S-Type
Reducer
Gearmotor
with Brake
416
416
Reduce
（Double Shaft）
93
φ114.5
195
234
208
12
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
208
34kg
Fig.G-60
43
Water-resistant,
Outdoor
Gearmotor
with Brake
22
12
Round Weight
Gearmotor
with Brake
4-φ14
43
43
Fig.G-59
Y Shaft
φ40h6
195
234
34kg
Reduce
（Double Shaft）
S-Type
Reducer
14
φ40h6
12
Round Weight
115
308
75 60
Water-resistant,
Outdoor
Gearmotor
with Brake
416
12
X Shaft
210.5
Reducer
（Double Shaft）
43
22
φ124
Gearmotor
with Brake
208
75
60
φ124
4-φ14
85
Gearmotor
with
Clutch/Brake
425
Right Angle Shaft
（Performance
Table/Dimension）
Water-resistant,
Outdoor
Gearmotor
with Brake
Y Shaft
12
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
88
φ40h6
115
CAD data：
KNC-40-HH125
308
200
110.5
75
60
12
KNC-401 HH1252
KNC-401 HH1255
KNC-402 HH1252
KNC-402 HH1255
425
Fig.G-58
416
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
CAD data：
KNC-40-HH134
●
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G30
Model Code
P.G14
Technical
Information
P.G32∼G35
G31
Performance Table/
Dimension
Performance Table/
Dimension
Bevel gear boxes
KN Type
Shaft Diameter φ40
KNC Type
Parallel Shaft
（Performance
Table/Dimension）
KNC-401 HH1343
KNC-401 HH1344
KNC-402 HH1343
KNC-402 HH1344
Fig.G-57
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
208
43
12
43
117
208
234
195
110.5
75
60
φ40h6
S-Type
Reducer
Y Shaft
85
43
φ40h6
195 234
Y Shaft
75 60
117
φ40h6
Gearmotor
with Clutch
/Brake
75 60
X Shaft
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
KNC-401 HU2343
KNC-401 HU2344
KNC-402 HU2343
KNC-402 HU2344
CAD data：
KNC-40-HU234
208
43
208
φ40h6
75 60
88
12
85
KNC-401 HD5343
KNC-401 HD5344
KNC-402 HD5343
KNC-402 HD5344
Performance Table/
Dimension
X Shaft
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
75
60
12
75
60
22
43
75 60
22
Round Weight
195
234
34kg
43
110.5
Y Shaft
4-φ14
110.5
195
234
12
418
Y Shaft
4-φ14
195
234
110.5
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
308
195
234
S-Type
Reducer
Performance Table/
Dimension
12
Gearmotor
with Brake
34kg
Water-Resistant,
Outdoor
Gearmotor
with Brake
43
Round Weight
(Notes) ●
110
193
φ40h6
S-Type
Reducer
Gearmotor
with Brake
X Shaft
12
115
φ40h6
Y Shaft
85
φ124
423
75
60
Reduce
（Double Shaft）
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
115
φ40h6
Y Shaft
φ40h6
110.5
CAD data：
KNC-40-HD534
88
208
75
60
φ40h6
φ124
43
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
308
S-Type
Reducer
Gearmotor
with Brake
416
416
Reduce
（Double Shaft）
93
φ114.5
195
234
208
12
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
208
34kg
Fig.G-60
43
Water-resistant,
Outdoor
Gearmotor
with Brake
22
12
Round Weight
Gearmotor
with Brake
4-φ14
43
43
Fig.G-59
Y Shaft
φ40h6
195
234
34kg
Reduce
（Double Shaft）
S-Type
Reducer
14
φ40h6
12
Round Weight
115
308
75 60
Water-resistant,
Outdoor
Gearmotor
with Brake
416
12
X Shaft
210.5
Reducer
（Double Shaft）
43
22
φ124
Gearmotor
with Brake
208
75
60
φ124
4-φ14
85
Gearmotor
with
Clutch/Brake
425
Right Angle Shaft
（Performance
Table/Dimension）
Water-resistant,
Outdoor
Gearmotor
with Brake
Y Shaft
12
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
88
φ40h6
115
CAD data：
KNC-40-HH125
308
200
110.5
75
60
12
KNC-401 HH1252
KNC-401 HH1255
KNC-402 HH1252
KNC-402 HH1255
425
Fig.G-58
416
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
CAD data：
KNC-40-HH134
●
Reducer
S-Type
Reducer
Technical
Information
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
KOMPASS
Gearbox
G30
Model Code
P.G14
Techincal
Information
P.G32∼G35
G31
Technical
Information
Technical
Information
Technical Information
K-Type (Metal Type)
K-Type (Bearing Type)・KN-Type
Cautions on Selection
Figure-1
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
①The KBM/KCM types are light and compact type gear box.
When higher strength, rotation and speed are to be required in
your operation, study to introduce the KB/KC types.
②Be sure that the overhung load (O.H.L.)and thrust load should
never be imposed to the shaft of gear box. In case the overhung
load and thrust load are imposed, support the both edges of
sprocket and gear with a bearing such as pillow, etc., in order to
avoid these loads. (Refer to the Figure-1 on page G32.)
③Never use the product under the condition of sudden reverse
rotation by plugging or of heavy shock load may occur. In such
situation, study to introduce the KB/KC Types.
④The values in the performance table in this catalogue are
obtained under the condition of: motor as a power generator,
operation with uniform load at 10 hours/day. Therefore, in case
of using the product in the different condition, correct the load
torque by the service factor in the Table-1.
shaft-bearing
(pillow, bearing, etc.)
Light Shock Load
gear, sprocket, etc.
S-Type
Reducer
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Technical
Information
Standard
Motors
Uniform Load
Service Factor (Sf)
Operation of less
than 3 hours/day
Operation of
3∼10 hours/day
Operation of
over 10 hours/day
1
（1）
1
（1.25）
1.25
（1.50）
1
（1.25）
1.25
（1.50）
1.50
（1.75）
Light Shock Load
Corrected Load Torque
Load Torque Imposed to Gear Box x Service Factor
In the operating rotation speed, the corrected load torque
should be always smaller than the allowable torque of X・Y
shaft specified in the performance table or than the Y
shaft allowable torque.
(Note)
In case the frequency of start/stop is over 10 times/hour, use the coefficient in the parenthesis.
Cautions on Operation
1. Installation Location
3. Connecting with Other Equipment
●Ambient Temperature：−10℃ to 40℃
●Ambient Humidity：85% max.
●Altitude：1,000 m max.
●Environment：Well ventilated place free from corrosive gas,
explosive gas, vapor and/or dust
●Installation Location：Indoors
●Before connecting with other equipment, be sure to confirm the
rotation direction. Opposite rotation may cause personal injury
and/or damage to the equipment.
●Use a flexible connecting parts in the connection of gearmotor
with the other equipment.
●Connect the units precisely, so that the center of shaft of
gearmotor and the other equipment are fully aligned. ●There is no shoulder on the gear box shaft. Therefore, when
attaching couplings, etc., be sure not to interfere the surface of
casing.
●There is no key groove in the gear box shaft. Therefore, when
connecting to the other equipment, use the clamping type
coupling to avoid slipping.
2. Installation
●Install the products on a flat surface free from vibration.
●The JIS Class 2 screw with groove is recommended for tapping
screw.
●The recommended tightening torque and the screw dimensions
are as shown in the table below:
●Recommended Tightening Torque
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
Hole for screw
Model
Size
（N・m）
Hole for tapping screw at end face
Tightening Nominal Effective Length Tightening
(mm)
Torque Diameter
Torque
KM-04
M3
0.3∼0.6
3
7∼11
0.4∼0.8
KM-06
M3
0.4∼0.8
3
9∼13
0.5∼1.0
KM-08
M4
0.5∼1.0
4
9∼14
0.5∼1.0
●Additional modification such as making bolt hole in the casing,
etc., must be avoided. Failure to observe this warning may cause
damage to gear box.
●In the equipments such as food machine, which must avoid oil or
grease, furnish with protective devices such as oil pan, etc. in
order to protect from the oil leakage.
G32
Table-2
Service Factor (Sf)
Water-resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
① The values in the performance table in this catalogue are obtained under the condition of: motor as a power generator, operation with
uniform load at 10 hours/day. Therefore, in case of using the product in the different condition, correct the load torque by the service factor
in the Table-2
Load Condition
4. Cautions on Operation
●During operation, do not approach or touch the rotating object
such as shaft. Failure to observe this warning may cause physical
injury by winding in.
●When noise and/or abnormal temperature rise are observed,
stop operation immediately. And never start operation until the
causes of the abnormal situation are found out and proper
measures are taken.
●Do not dismantle or modify the product. Failure to observe this
warning may cause damage to the equipment.
Heavy Shock Load
(Note)
Service Factor (Sf)
Operation of less
than 3 hours/day
Operation of
3∼10 hours/day
Operation of
over 10 hours/day
1
（1）
1
（1.25）
1.25
（1.50）
1
（1.25）
1.25
（1.50）
1.50
（1.75）
1.25
（1.50）
1.50
（1.75）
1.75
（2.00）
② For the positioning of shaft, select from the shaft positioning
figures of each model.
③ Confirmation of overhung load (O.H.L.).
An overhung load is a suspending load imposed on a shaft. In
the coupling of reducer shaft and other machine, if chains, belts
and gears are used, this O.H.L. must be taken into
consideration.
O.H.L.＝
TLE×K1×K2
（N）
｛kgf｝
R
TLE ： Corrected load torque imposed on gear box shaft
(N・m)(kgf・m)
R ： Pitch Circle Radius(m) of sprocket, pulley, gear, etc.
ttached to gear box shaft.
K1 ： Factor by the connecting method (Refer to Table-3)
K2 ： Factor by the load point (Refer to Table-4)
＊The O.H.L. value calculated by the above formula should be smaller
than the allowable O.H.L. value in the performance table.
Table-3
Factor K1
Connecting Method
K1
Chain, Timing Belt
1.00
Gear
1.25
V-Belt
1.50
Factor K2
Load Point
●Load point
Table-4
K2
Root of the shaft
0.75
Center of the shaft
1.00
End of the shaft
1.50
Root Center End
④ Select the model which satisfies all of the above ①, ②
and ③.
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Corrected Load Torque =Load Torque Imposed to Gear Box x Service Factor
Table-1
Uniform Load
load torque, type of power generator, input rotation speed, reduction ratio, operating hour, connecting method, frequency of start/stop
■Process of Selection
part for
connection
Service Factor (Sf)
Load Condition
Parallel Shaft
（Performance
Table/Dimension）
■Particulars Necessary for Selection
1. In case starting/stopping action counts more than 10
times/hour, use the coefficient in the parenthesis.
2. In case of power generator other than electric motor
(engine, etc.), use the coefficient in the parenthesis
too.
In the operating rotation speed, the corrected load
torque should be always smaller than the allowable
torque of X・Y shaft specified in the performance table
or than the Y shaft allowable torque.
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
●Ambient Temperature: −10℃ to 40℃
●Ambient Humidity: 85% max.
●Altitude: 1,000 m max.
●Environment: Well ventilated place free from corrosive gas,
●Installation Location: Indoors
2. Installation Surface
●Install the product, fixing with bolts on a flat and machined
surface free from vibration.
●When attaching couplings, sprockets, pulleys, gears, etc., to the
gear box shaft, be sure not to interfere the oil seal or case surface
because some models have no shoulder.“H7”fit is
recommended for the connecting hole.
●In direct connection, connect the gear box shaft with the shaft of
other equipment precisely, so that the center of the shaft of both
machines are fully aligned.
●In case of attachment by chains, belts or gears, connect the gear
box shaft and that of the other machine precisely, so that the
shaft of both machines are parallel. Also, be sure that the
centerline of the shaft of both machines must be perpendicular to
the shaft.
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Technical
Information
Standard
Motors
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
●Be sure to operate the product within the allowable load torque
and O.H.L.
●Sudden reverse rotation by plugging may cause damages to gear
box or other machine. Therefore, be sure to make complete stop
before starting reverse rotation.
G33
Technical
Information
Technical
Information
K-Type (Metal Type)
K-Type (Bearing Type)・KN-Type
Figure-1
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
①The KBM/KCM types are light and compact type gear box.
When higher strength, rotation and speed are to be required in
your operation, study to introduce the KB/KC types.
②Be sure that the overhung load (O.H.L.)and thrust load should
never be imposed to the shaft of gear box. In case the overhung
load and thrust load are imposed, support the both edges of
sprocket and gear with a bearing such as pillow, etc., in order to
avoid these loads. (Refer to the Figure-1 on page G32.)
③Never use the product under the condition of sudden reverse
rotation by plugging or of heavy shock load may occur. In such
situation, study to introduce the KB/KC Types.
④The values in the performance table in this catalogue are
obtained under the condition of: motor as a power generator,
operation with uniform load at 10 hours/day. Therefore, in case
of using the product in the different condition, correct the load
torque by the service factor in the Table-1.
shaft-bearing
(pillow, bearing, etc.)
Light Shock Load
gear, sprocket, etc.
S-Type
Reducer
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Technical
Information
Standard
Motors
Uniform Load
Service Factor (Sf)
Operation of less
than 3 hours/day
Operation of
3∼10 hours/day
Operation of
over 10 hours/day
1
（1）
1
（1.25）
1.25
（1.50）
1
（1.25）
1.25
（1.50）
1.50
（1.75）
Light Shock Load
Corrected Load Torque
Load Torque Imposed to Gear Box x Service Factor
In the operating rotation speed, the corrected load torque
should be always smaller than the allowable torque of X・Y
shaft specified in the performance table or than the Y
shaft allowable torque.
(Note)
In case the frequency of start/stop is over 10 times/hour, use the coefficient in the parenthesis.
●Ambient Temperature：−10℃ to 40℃
●Ambient Humidity：85% max.
●Altitude：1,000 m max.
●Environment：Well ventilated place free from corrosive gas,
●Installation Location：Indoors
●Before connecting with other equipment, be sure to confirm the
rotation direction. Opposite rotation may cause personal injury
and/or damage to the equipment.
●Use a flexible connecting parts in the connection of gearmotor
with the other equipment.
●Connect the units precisely, so that the center of shaft of
gearmotor and the other equipment are fully aligned. ●There is no shoulder on the gear box shaft. Therefore, when
attaching couplings, etc., be sure not to interfere the surface of
casing.
●There is no key groove in the gear box shaft. Therefore, when
connecting to the other equipment, use the clamping type
coupling to avoid slipping.
2. Installation
●Install the products on a flat surface free from vibration.
●The JIS Class 2 screw with groove is recommended for tapping
screw.
●The recommended tightening torque and the screw dimensions
are as shown in the table below:
●Recommended Tightening Torque
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
Hole for screw
Model
Size
（N・m）
Hole for tapping screw at end face
Tightening Nominal Effective Length Tightening
(mm)
Torque Diameter
Torque
KM-04
M3
0.3∼0.6
3
7∼11
0.4∼0.8
KM-06
M3
0.4∼0.8
3
9∼13
0.5∼1.0
KM-08
M4
0.5∼1.0
4
9∼14
0.5∼1.0
●Additional modification such as making bolt hole in the casing,
etc., must be avoided. Failure to observe this warning may cause
damage to gear box.
●In the equipments such as food machine, which must avoid oil or
grease, furnish with protective devices such as oil pan, etc. in
order to protect from the oil leakage.
G32
Table-2
Service Factor (Sf)
Water-resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
① The values in the performance table in this catalogue are obtained under the condition of: motor as a power generator, operation with
uniform load at 10 hours/day. Therefore, in case of using the product in the different condition, correct the load torque by the service factor
in the Table-2
Load Condition
●During operation, do not approach or touch the rotating object
such as shaft. Failure to observe this warning may cause physical
injury by winding in.
●When noise and/or abnormal temperature rise are observed,
stop operation immediately. And never start operation until the
causes of the abnormal situation are found out and proper
measures are taken.
●Do not dismantle or modify the product. Failure to observe this
warning may cause damage to the equipment.
Heavy Shock Load
(Note)
Service Factor (Sf)
Operation of less
than 3 hours/day
Operation of
3∼10 hours/day
Operation of
over 10 hours/day
1
（1）
1
（1.25）
1.25
（1.50）
1
（1.25）
1.25
（1.50）
1.50
（1.75）
1.25
（1.50）
1.50
（1.75）
1.75
（2.00）
② For the positioning of shaft, select from the shaft positioning
figures of each model.
③ Confirmation of overhung load (O.H.L.).
An overhung load is a suspending load imposed on a shaft. In
the coupling of reducer shaft and other machine, if chains, belts
and gears are used, this O.H.L. must be taken into
consideration.
O.H.L.＝
TLE×K1×K2
（N）
｛kgf｝
R
TLE ： Corrected load torque imposed on gear box shaft
(N・m)(kgf・m)
R ： Pitch Circle Radius(m) of sprocket, pulley, gear, etc.
ttached to gear box shaft.
K1 ： Factor by the connecting method (Refer to Table-3)
K2 ： Factor by the load point (Refer to Table-4)
＊The O.H.L. value calculated by the above formula should be smaller
than the allowable O.H.L. value in the performance table.
Table-3
Factor K1
Connecting Method
K1
Chain, Timing Belt
1.00
Gear
1.25
V-Belt
1.50
Factor K2
Load Point
●Load point
Table-4
K2
Root of the shaft
0.75
Center of the shaft
1.00
End of the shaft
1.50
Root Center End
④ Select the model which satisfies all of the above ①, ②
and ③.
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Corrected Load Torque =Load Torque Imposed to Gear Box x Service Factor
Table-1
Uniform Load
load torque, type of power generator, input rotation speed, reduction ratio, operating hour, connecting method, frequency of start/stop
■Process of Selection
part for
connection
Service Factor (Sf)
Load Condition
Parallel Shaft
（Performance
Table/Dimension）
■Particulars Necessary for Selection
1. In case starting/stopping action counts more than 10
times/hour, use the coefficient in the parenthesis.
2. In case of power generator other than electric motor
(engine, etc.), use the coefficient in the parenthesis
too.
In the operating rotation speed, the corrected load
torque should be always smaller than the allowable
torque of X・Y shaft specified in the performance table
or than the Y shaft allowable torque.
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
●Ambient Temperature: −10℃ to 40℃
●Ambient Humidity: 85% max.
●Altitude: 1,000 m max.
●Environment: Well ventilated place free from corrosive gas,
●Installation Location: Indoors
2. Installation Surface
●Install the product, fixing with bolts on a flat and machined
surface free from vibration.
●When attaching couplings, sprockets, pulleys, gears, etc., to the
gear box shaft, be sure not to interfere the oil seal or case surface
because some models have no shoulder.“H7”fit is
recommended for the connecting hole.
●In direct connection, connect the gear box shaft with the shaft of
other equipment precisely, so that the center of the shaft of both
machines are fully aligned.
●In case of attachment by chains, belts or gears, connect the gear
box shaft and that of the other machine precisely, so that the
shaft of both machines are parallel. Also, be sure that the
centerline of the shaft of both machines must be perpendicular to
the shaft.
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Technical
Information
Standard
Motors
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
●Be sure to operate the product within the allowable load torque
and O.H.L.
●Sudden reverse rotation by plugging may cause damages to gear
box or other machine. Therefore, be sure to make complete stop
before starting reverse rotation.
G33
■Inertia Moment of COMPASS (GD2) (Values converted to X shaft)
Parallel Shaft
（Performance
Table/Dimension）
Reduction Ratio
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
1:1
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Type Designation
Inertia Moment（X10−4kg・m2）
2
−4
｛GD（X10
kg・m2）｝
KBM-041
0.0015
0.0061
KCM-041
0.0016
0.0062
KBM-061
0.014
0.054
KCM-061
0.014
0.054
KBM-081
0.031
0.12
KCM-081
0.032
0.13
KB-101
0.045
0.18
KC-101
0.048
0.19
KB-151
0.53
2.1
KC-151
0.56
2.2
Gearmotor
with Brake
KB-201
1.8
7.2
Water-resistant,
Outdoor
Gearmotor
with Brake
KC-201
1.9
7.8
KB-102
0.022
0.086
Gearmotor
with Clutch
/Brake
KC-102
0.022
0.089
Reduce
（Double Shaft）
1:2
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Reduction Ratio
Reduce
（Double Shaft）
1:1
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Technical
Information
Standard
Motors
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
■An Example of Selection 1
Application: Conveyor (uniform load)
Load Torque: 78.4N・m (8kgf・m)
X Shaft Rotation Speed: 300 rpm
Reduction Ratio: 1 : 2
Shaft Positioning: HH1044
Operating Hour: 12 hours/day
Connecting Method: X Shaft- coupling
Y Shaft - chain ( positioned at the center of shaft)
Installation Method: Horizontal mount
Installation Location: Indoors
Gearmotor
with Brake
power generator
Water-resistant,
Outdoor
Gearmotor
with Brake
HH1044
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
chain
S-Type
Reducer
PCDφ100
Right Angle Shaft
（Performance
Table/Dimension）
1
●Obtain
torque
Gearmotor
with Brake
The service factor according to the load torque can be obtained by the Table-2, namely Sf=1.25
Accordingly, the corrected torque imposed on the Y shaft can be calculated as follows:
Water-resistant,
Outdoor
Gearmotor
with Brake
TLE＝78.4×1.25＝98N・m ｛TLE＝8×1.25＝10kgf・m｝
KB-152
0.37
1.5
2
●Obtain
O.H.L.
KC-152
0.37
1.5
The load O.H.L. can be obtained with the following formula:
KB-202
0.79
3.1
KC-202
0.82
3.3
O.H.L＝
98×1×1
TLE×K1×K2
＝
＝1960N
100
R
2×1000
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
｛O.H.L＝
10×1×1
TLE×K1×K2
＝
＝200kgf｝
100
R
2×1000
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
1:2
Gearmotor
with Brake
3
●Determine
the model:
Type Designation
2
−4
｛GD（X10
kg・m2）｝
KNB-191
4.0
16.0
KNC-191
4.1
16.2
KNB-251
24.8
99.3
KNC-251
25.0
100
Application: Line Shaft Drive
Load Torque: Load A, B and C are all 58.8 N・m (6kgf・m) respectively (uniform load)
Rotation Speed: 600 rpm
Shaft Positioning: As shown in the figure on the right
Connecting Method: All with coupling
KNB-321
40.0
160
KNC-321
40.8
163
KNB-401
89.5
358
KNC-401
92.0
368
KNB-192
1.9
7.4
KNC-192
1.9
7.5
KNB-252
10.3
41.3
KNC-252
10.4
41.6
KNB-322
12.9
51.7
KNC-322
13.1
52.4
KNB-402
38.3
153
KNC-402
38.8
155
The most appropriate model which satisfies all the conditions, torque and the O.H.L. is KNB-322 HH1044.
In case of Line Shaft Drive, the load imposed to Y shaft differs
according to the gear box position. Therefore, model should be
selected respectively. Service factor (Sf) (Table-2) according to
the conditions is 1(Sf=1.0) for all the case.
The correction load torque imposed on X shaft is calculated as
follows since operation is done only for the load A:
58.8×1.0＝58.8N・m ｛6×1.0＝6kgf・m｝
The correction load torque imposed on Y shaft is calculated as
follows since operation is done for the load A, B and C.
（58.8＋58.8＋58.8）×1.0＝176.4N・m
｛（6＋6＋6）×1.0＝18kgf・m｝
Finally, KNC-401 HH1344 is selected from the performance table.
2
●Gear
Box No. 2
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
load A
load B
load C Concentric Hollow Shaft
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
power generator
S-Type
Reducer
Technical
Information
1
●Gear
Box No.1
follows since operation is done only for the load B:
58.8×1.0＝58.8N・m ｛6×1.0＝6kgf・m｝
follows since operation is done for the load B and C.
（58.8＋58.8）×1.0＝117.6N・m
｛（6＋6）×1.0＝12kgf・m｝
G34
Parallel Shaft
（Performance
Table/Dimension）
●KN Type
Water-resistant,
Outdoor
Gearmotor
with Brake
S-Type
Reducer
An Example of Selection
●K Type
Gearmotor
with Brake
Reducer
（Double Shaft）
Technical
Information
Technical
Information
No.1
HH1344
No.2
HH1344
No.3
HH1044
3
●Gear
Box No. 3
The correction load torque imposed on X shaft is calculated
as follows since operation is done only for the load C:
58.8×1.0＝58.8N・m ｛6×1.0＝6kgf・m｝
The correction load torque imposed on Y shaft is calculated
as follows since operation is only for the load C:
58.8×1.0＝58.8N・m ｛6×1.0＝6kgf・m｝
Finally, KNB-251 HH1344 is selected from the performance
table.
Standard
Motors
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
4
●Final
Decision of the Model
No.1 Gear Box KNC-401 HH1344
No.3 Gear Box KNB-251 HH1044
G35
■Inertia Moment of COMPASS (GD2) (Values converted to X shaft)
Parallel Shaft
（Performance
Table/Dimension）
Reduction Ratio
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
1:1
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Type Designation
2
−4
｛GD（X10
kg・m2）｝
KBM-041
0.0015
0.0061
KCM-041
0.0016
0.0062
KBM-061
0.014
0.054
KCM-061
0.014
0.054
KBM-081
0.031
0.12
KCM-081
0.032
0.13
KB-101
0.045
0.18
KC-101
0.048
0.19
KB-151
0.53
2.1
KC-151
0.56
2.2
Gearmotor
with Brake
KB-201
1.8
7.2
Water-resistant,
Outdoor
Gearmotor
with Brake
KC-201
1.9
7.8
KB-102
0.022
0.086
Gearmotor
with Clutch
/Brake
KC-102
0.022
0.089
Reduce
（Double Shaft）
1:2
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Gearmotor
with Brake
Reduction Ratio
Reduce
（Double Shaft）
1:1
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
S-Type
Reducer
Technical
Information
Standard
Motors
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
Application: Conveyor (uniform load)
Load Torque: 78.4N・m (8kgf・m)
X Shaft Rotation Speed: 300 rpm
Shaft Positioning: HH1044
Connecting Method: X Shaft- coupling
Y Shaft - chain ( positioned at the center of shaft)
Gearmotor
with Brake
power generator
Water-resistant,
Outdoor
Gearmotor
with Brake
HH1044
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
chain
S-Type
Reducer
PCDφ100
Right Angle Shaft
（Performance
Table/Dimension）
1
●Obtain
torque
Gearmotor
with Brake
The service factor according to the load torque can be obtained by the Table-2, namely Sf=1.25
Accordingly, the corrected torque imposed on the Y shaft can be calculated as follows:
Water-resistant,
Outdoor
Gearmotor
with Brake
TLE＝78.4×1.25＝98N・m ｛TLE＝8×1.25＝10kgf・m｝
KB-152
0.37
1.5
2
●Obtain
O.H.L.
KC-152
0.37
1.5
The load O.H.L. can be obtained with the following formula:
KB-202
0.79
3.1
KC-202
0.82
3.3
O.H.L＝
98×1×1
TLE×K1×K2
＝
＝1960N
100
R
2×1000
Gearmotor
with Clutch
/Brake
Reduce
（Double Shaft）
｛O.H.L＝
10×1×1
TLE×K1×K2
＝
＝200kgf｝
100
R
2×1000
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
1:2
Gearmotor
with Brake
3
●Determine
the model:
Type Designation
2
−4
｛GD（X10
kg・m2）｝
KNB-191
4.0
16.0
KNC-191
4.1
16.2
KNB-251
24.8
99.3
KNC-251
25.0
100
Application: Line Shaft Drive
Load Torque: Load A, B and C are all 58.8 N・m (6kgf・m) respectively (uniform load)
Rotation Speed: 600 rpm
Shaft Positioning: As shown in the figure on the right
Connecting Method: All with coupling
KNB-321
40.0
160
KNC-321
40.8
163
KNB-401
89.5
358
KNC-401
92.0
368
KNB-192
1.9
7.4
KNC-192
1.9
7.5
KNB-252
10.3
41.3
KNC-252
10.4
41.6
KNB-322
12.9
51.7
KNC-322
13.1
52.4
KNB-402
38.3
153
KNC-402
38.8
155
The most appropriate model which satisfies all the conditions, torque and the O.H.L. is KNB-322 HH1044.
In case of Line Shaft Drive, the load imposed to Y shaft differs
according to the gear box position. Therefore, model should be
selected respectively. Service factor (Sf) (Table-2) according to
the conditions is 1(Sf=1.0) for all the case.
follows since operation is done only for the load A:
58.8×1.0＝58.8N・m ｛6×1.0＝6kgf・m｝
follows since operation is done for the load A, B and C.
（58.8＋58.8＋58.8）×1.0＝176.4N・m
｛（6＋6＋6）×1.0＝18kgf・m｝
2
●Gear
Box No. 2
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
S-Type
Reducer
load A
load B
load C Concentric Hollow Shaft
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
power generator
S-Type
Reducer
Technical
Information
1
●Gear
Box No.1
follows since operation is done only for the load B:
58.8×1.0＝58.8N・m ｛6×1.0＝6kgf・m｝
follows since operation is done for the load B and C.
（58.8＋58.8）×1.0＝117.6N・m
｛（6＋6）×1.0＝12kgf・m｝
G34
Parallel Shaft
（Performance
Table/Dimension）
●KN Type
Water-resistant,
Outdoor
Gearmotor
with Brake
S-Type
Reducer
An Example of Selection
●K Type
Gearmotor
with Brake
Reducer
（Double Shaft）
Technical
Information
Technical
Information
No.1
HH1344
No.2
HH1344
No.3
HH1044
3
●Gear
Box No. 3
The correction load torque imposed on X shaft is calculated
as follows since operation is done only for the load C:
58.8×1.0＝58.8N・m ｛6×1.0＝6kgf・m｝
The correction load torque imposed on Y shaft is calculated
as follows since operation is only for the load C:
58.8×1.0＝58.8N・m ｛6×1.0＝6kgf・m｝
Finally, KNB-251 HH1344 is selected from the performance
table.
Standard
Motors
Cautions
for Safety
Option
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
4
●Final
Decision of the Model
No.3 Gear Box KNB-251 HH1044
G35
■The case of adding oil plug PT1/4 to the
standard specification
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Technical
Information
Technical
Information
●standard specification
Parallel Shaft
（Performance
Table/Dimension）
In our standard, the position of oil inlet and oil outlet are
designed to be in the horizontal face (floor face)
Gearmotor
with Brake
Oil cap PF1/2 (Oil inlet)
Water-resistant,
Outdoor
Gearmotor
with Brake
Besides the oil inlet/outlet in the horizontal face,
inlet/outlet in the ceiling or wall face are also available.
Therefore, if you require the oil inlet/outlet to be in the
position other than the horizontal face, instruct us in which
face of the A, B, C or D in the Figure-2 you wish to add the
oil plug PT1/4 as a special order.
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
※ In the case of additional works, we need additional days for the Gearmotor
with Brake
Oil plug PT1/4 (Oil outlet)
delivery. Ask our sales office for the delivery.
●The position of oil plug PT1/4 added
〈Figure−2〉
Gearmotor
with Clutch
/Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
C face
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
D face
B face
Gearmotor
with Brake
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
A face
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
The oil plug PT1/4 can be added in the position marked with ● in the figure.
C
fac
e
ce
D
fa
A
fac
e
B
c
fa
Gearmotor
with Brake
e
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
Reducer
S-Type
Reducer
Technical
Information
Performance Table/
Dimension
B
ce
fa
Af
ac
e
D
f
e
ac
C
S-Type
Reducer
fac
e
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
G36
※ If the face in which the oil cap exist, is supposed to be A face,
the other faces are regarded as B, C and D face in clockwise viewed from above.
KOMPASS
Gearbox
G37
■The case of adding oil plug PT1/4 to the
standard specification
Parallel Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Technical
Information
Technical
Information
●standard specification
Parallel Shaft
（Performance
Table/Dimension）
In our standard, the position of oil inlet and oil outlet are
designed to be in the horizontal face (floor face)
Gearmotor
with Brake
Oil cap PF1/2 (Oil inlet)
Water-resistant,
Outdoor
Gearmotor
with Brake
Besides the oil inlet/outlet in the horizontal face,
inlet/outlet in the ceiling or wall face are also available.
Therefore, if you require the oil inlet/outlet to be in the
position other than the horizontal face, instruct us in which
face of the A, B, C or D in the Figure-2 you wish to add the
oil plug PT1/4 as a special order.
Gearmotor
with
Clutch/Brake
Reducer
（Double Shaft）
S-Type
Reducer
Right Angle Shaft
（Performance
Table/Dimension）
※ In the case of additional works, we need additional days for the Gearmotor
with Brake
Oil plug PT1/4 (Oil outlet)
delivery. Ask our sales office for the delivery.
●The position of oil plug PT1/4 added
〈Figure−2〉
Gearmotor
with Clutch
/Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Gearmotor
with Clutch
/Brake
C face
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
Hollow Shaft
Solid Shaft
Performance
Table/Dimension
D face
B face
Gearmotor
with Brake
Gearmotor
with Brake
Water-resistant,
Outdoor
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reduce
（Double Shaft）
Reduce
（Double Shaft）
S-Type
Reducer
S-Type
Reducer
A face
Performance Table/
Dimension
Gearmotor
with Brake
Water-Resistant,
Outdoor
Gearmotor
with Brake
The oil plug PT1/4 can be added in the position marked with ● in the figure.
C
fac
e
ce
D
fa
A
fac
e
B
c
fa
Gearmotor
with Brake
e
Water-Resistant,
Outdoor
Gearmotor
with Brake
Reducer
Reducer
S-Type
Reducer
Technical
Information
Performance Table/
Dimension
B
ce
fa
Af
ac
e
D
f
e
ac
C
S-Type
Reducer
fac
e
Technical
Information
Standard
Motors
Standard
Motors
Cautions
for Safety
Cautions
for Safety
Option
Option
GT-STEP
Index
Gearmotor
GT-STEP
Index
Gearmotor
KOMPASS
Gearbox
G36
※ If the face in which the oil cap exist, is supposed to be A face,
the other faces are regarded as B, C and D face in clockwise viewed from above.
KOMPASS
Gearbox
G37
Guidance to NISSEI's Website
Visit NISSEI's Website and Register Yourself
http://www.nissei-gtr.co.jp/
"The following items are available on NISSEI's website."
■GTR model selection and product details ■Request for catalogs ■Downloadable drawings of external dimensions ■Downloadable CAD data
■PDF date on a variety of catalogs and operation manuals ■Information on new products ■Registration for the information dispatch system
Make full use of NISSEI's website.
For details, contact your NISSEI representative or NISSEI sales staffs.
■Tokyo Branch Office
■Sales, Overseas Section
TEL : +81-566-92-5312
FAX : +81-566-92-7002
E-mail : [email protected]
2-8-9 Iwamoto-cho, Chiyoda-ku, Tokyo 101-0032 Japan
TEL :+81-3-3865-7681 FAX :+81-3-5820-7693
E-mail :[email protected]
■Osaka Branch Office
1-18 Ikutamamaemachi, Tennoji-ku, Osaka 543-0072 Japan
TEL :+81-6-6772-1900 FAX :+81-6-6772-0406
■Honbu Sales Office
1-1 Inoue, Izumi-cho, Anjo-shi, Aichi 444-1297 Japan
TEL :+81-566-92-7410 FAX :+81-566-92-7418

KOMPASS bevel gearboxes

Transcription

Similar documents

COMMERCIAL LIGHTING SUPPLY SOCKET GUIDE

Chery QQ Service Manual