Cabinet Hardware Collections

Transcription

TABLE OF CONTENTS
Surfacing Products ..............................................1–14
THIS INFORMATION IS PROVIDED “AS IS” WITHOUT
WARRANTY OF ANY KIND BY ANY PERSON,
INCLUDING WITHOUT LIMITATION, THE OWNER AND
THE PUBLISHER.
Door & Drawer Slide Systems .......................... 67–92
Drawer Slides, Drawer Systems, Rear Sockets, Pocket Doors, Pencil
Drawers, Ergonomics & Keyboard Trays
Hinges & Lift Systems ..................................... 93–104
Concealed, Face Frame, Double & Single Demountable, Institutional,
Piano Hinges & Door Lift Systems
Shelving & Hardware ..................................... 105–116
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Shelf Standards, Brackets & Clips, Sliding Door Hardware, Closet Rods &
Supports, Shelf Clips & Supports
Screws & Fasteners....................................... 117–134
Screws, Draw Bolts, Joint Fasteners, Mirror Clips & Drive Bits
PLEASE NOTE THAT ALL PRODUCTS IN THIS CATALOG
MAY NOT BE AVAILABLE AT ALL LOCATIONS.
Storage & Convenience................................. 135–156
Lazy Susans, Sink Front Trays, Waste Containers, Hampers, Drawer &
Door Organization
Wood Products............................................... 157–180
Range Hoods, Blowers & Liners, Corbels, Mouldings, Legs, Bunn Feet &
Adornments
Lighting........................................................... 181–190
Fluorescent, Xenon, LED Lighting & Accessories
Cabinet Locks & Latches .............................. 191–194
Magnetic, Ball & Bullet Catches, Cam & Drawer Locks
Abrasives........................................................ 195–200
Discs, Pads, Sponges, Backup Pads, Portable & Wide Belts
Copyright © 2010
ISC Surfaces
Tools, Safety & Machines .............................. 201–252
Drill, Boring & Router Bits, Laminate Files, Shears & Rollers, Straight
Edges, Boring Machines & Templates
Published by SAMS Custom Catalog Services
www.samsccs.com
Cover photograph courtesy of Wilsonart International
Miscellaneous ................................................ 253–256
Corner Braces, Wiping Cloths, Dowels, Grommets, Bumper Pads, Leg
Levelers & Cove Bases
Sinks
Edgebanding
& Veneers
Adhesives
& Caulk
Decorative
Hardware
Hinges & Door & Drawer
Lift Systems Slide Systems
Showcase, Liberty & Wire Pulls
Shelving
& Hardware
Decorative Hardware ......................................... 49–66
Screws &
Fasteners
Contact & PVA Adhesives, Melamine Adhesives, Silicone Caulk, Seamfil,
Hot Melt & Wood Patch
Storage &
Convenience
Adhesives & Caulk............................................. 39–48
Wood
Products
PVC & Veneer Edgebanding, Fast Edge, Fastcaps, Fastedge, Veneer
Sheet Goods
Lighting
Edgebanding & Veneers .................................... 21–38
Cabinet Locks
& Latches
Wilsonart HD Sinks, Karran Undermount & Stainless Steel Sinks
Abrasives
Sinks....................................................................15–20
Miscellaneous Tools, Safety
& Machines
Laminate, Backers & Liners, Custom Edge, Decorative Metals, Solid
Surface & Butcher Blocks
Surfacing
Products
Table of Contents
NOTES
About the Company
ABOUT THE COMPANY
Company History
COMPANY HISTORY
Locations
LOCATIONS
KANSAS CITY
WICHITA
5100 Kansas Avenue
Kansas City, KS 66106
2140 W. Harry Court
Wichita, KS 67213
SPRINGFIELD
2727 N. LeCompte Rd.
Springfield, MO 65803
OKLAHOMA CITY
TULSA
2330 N.W. 10th Street
Oklahoma City, OK 73107
11915 E. 51st Street
Tulsa, OK 74146
TERMS & CONDITIONS
Terms & Conditions
INTRODUCING ISC CONNECT
Introducing ISC Connect
ISC Connect Enrollment Form
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Surfacing Products
Visit us online at www.iscsurfaces.com!
Sinks
HIGH-PRESSURE LAMINATE PRODUCT INFORMATION
High Pressure Laminates
1
& Machines
Surfacing
Products
Unit # 3494001
Unit # 3494002
HIGH-PRESSURE LAMINATE NUMERICAL LISTING & SIZE/AVAILABILITY CHART
Pattern
No.
Pattern
Name
48
72
30 x
96 120
144
48
72
36 x
96
120
144
48
72
48 x
96
120
10734-60
Limber Maple
X
X
X
10745-60
Fonthill Pear
X
X
X
10776-60
Kensington Maple
X
13045-60
Shale Moonstone
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
144
48
72
60x
96
120
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
144
X
X
X
X
X
X
X
1500-60
Grey
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1503-60
Putty
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1530-60
Beige
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1531-60
Light Beige
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1570-60
White
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1572-60
Antique White
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1573-60
Frosty White
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1595-60
Black
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1755K-01
Canyon Black
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1763-60
Brune Slate
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1786-60
Verdi Oxide
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1787-60
Oxide
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1792-60
Nirvana
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1796-7
Bronzed Fusion
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1799-7
Ebony Fusion
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1811-35
Deepstar Flint
X
X
X
X
X
X
X
X
X
1812-35
Deepstar Fossil
X
X
X
X
X
X
X
X
X
1813-35
Deepstar Glaze
X
X
X
X
X
X
X
X
X
1814-35
Deepstar Bronze
X
X
X
X
X
X
X
X
X
1815-35
Deepstar Agate
X
X
X
X
X
X
X
X
X
1816-35
Deepstar Jade
X
X
X
X
X
X
X
X
X
1817-35
Deepstar Mineral
X
X
X
X
X
X
X
X
X
1818-35
Deepstar Slate
X
X
X
X
X
X
X
X
X
1819-35
Bella Venito
X
X
X
X
X
X
X
X
X
1820-35
Bella Noche
X
X
X
X
X
X
X
X
X
1821-35
Bella Reale
X
X
X
X
X
X
X
X
X
X
1822-35
Bella Capri
X
X
X
X
X
X
X
X
X
1823-35
Sedona Spirit
X
X
X
X
X
X
X
X
X
1824-35
Sedona Bluff
X
X
X
X
X
X
X
X
X
1825-35
Sedona Spa
X
X
X
X
X
X
X
X
X
1826-35
Sedona Trail
X
X
X
X
X
X
X
X
X
1831-35
Raven Gemstone
X
X
X
X
X
X
X
X
X
1834-45
Crystalline Shell
X
X
X
X
X
X
X
X
X
1835-45
Crystalline Onyx
X
X
X
X
X
X
X
X
X
1836-45
Crystalline Ice
X
X
X
X
X
X
X
X
X
1837-45
Crystalline Pearl
X
X
X
X
X
X
X
X
X
1838-45
Crystalline Dune
X
X
X
X
X
X
X
X
X
1839-45
Crystalline Braun
X
X
X
X
X
X
X
X
X
1846K-35
Medallion
X
X
X
X
X
X
X
X
X
1847K-45
Bronze Eclipse
X
X
X
X
X
X
X
X
X
1848K-45
Ebony Eclipse
X
X
X
X
X
X
X
X
X
1849K-35
Luna Frost
X
X
X
X
X
X
X
X
X
1850K-35
Luna Winter
X
X
X
X
X
X
X
X
X
1851K-35
Luna Glow
X
X
X
X
X
X
X
X
X
1852K-35
Luna Crest
X
X
X
X
X
X
X
X
X
1853K-35
Luna Shadow
X
X
X
X
X
X
X
X
X
1854K-35
Luna Night
X
X
X
X
X
X
X
X
X
2932-60
Almond Leather
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4142-60
Grey Glace
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
48 x
96
120
4143-60
Neutral Glace
X
X
X
4166-60
Pampas
X
X
X
144
48
72
60x
96
120
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
144
4168-60
Grey Pampas
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4170-60
Beige Pampas
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4207-60
Fresco
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4550K-01
Granite
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4551K-01
Blackstar Granite
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4552K-07
Ebony Star
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4571-7
Mesa Sunrise
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4573-7
Mesa Verte
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4574-7
Mesa Twilight
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4579-7
Mesa Sand
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4580-7
Mesa Gold
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4584-7
Brazilian Topaz
X
X
X
X
X
X
X
X
X
X
4588-7
Kalahari Topaz
X
X
X
X
X
X
X
X
X
X
X
X
X
4589-7
Smoky Topaz
X
X
X
X
X
X
X
X
X
X
X
X
X
4595-52
Bahia Granite
X
X
X
X
X
X
X
X
4596-52
Egyptian Sun
X
X
X
X
X
X
4608-60
Caldera Beige
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4608-60
Cladera Beige
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4621-60
White Nebula
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4622-60
Grey Nebula
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4623-60
Graphite Nebula
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4624-60
Beige Nebula
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4628-60
Sand Nebula
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4630-60
Cloud Nebula
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4651-60
Navy Legacy
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4654-60
Olive Legacy
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4656-60
Bronze Legacy
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4657-60
Green Legacy
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4663-60
Tawny Legacy
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4667-60
Green Tigris
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4669-60
Natural Tigris
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4672-60
Curry Tigris
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4673-60
Saffron Tigris
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4674-60
Evening Tigris
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4680-60
Lodestone
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4724-52
Milano Amber
X
X
X
X
X
X
X
X
X
X
X
4725-52
Milano Brown
X
X
X
X
X
X
X
X
X
X
X
4726-52
Milano Quartz
X
X
X
X
X
X
X
X
X
X
X
4727-52
Milano Glen
X
X
X
X
X
X
X
X
X
X
X
4728-52
Milano Mahogany
X
X
X
X
X
X
X
X
X
X
X
4738-60
Ochre Roletta
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4744-60
Karratha Brush
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4745-60
Maroochy Brush
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4746-60
Woolamai Brush
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4757-60
Mystique Moonlight
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4758-60
Mystique Dusk
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4759-60
Mystique Marine
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4760-60
Mystique Night
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4761-60
Mystique Mount
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4762-60
Mystique Dawn
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4763-60
Mystique Marsh
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4779-60
Pewter Brush
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4783-60
White Tigris
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4789-52
Limestone
X
X
X
X
X
X
X
4790-52
Greystone
X
X
X
X
X
X
X
Sinks
72
Edgebanding
& Veneers
48
Adhesives
& Caulk
144
Decorative
Hardware
120
36 x
96
Shelving
& Hardware
72
Screws &
Fasteners
48
Storage &
Convenience
144
Wood
Products
30 x
96 120
Lighting
72
Cabinet Locks
& Latches
48
Abrasives
Pattern
Name
3
& Machines
Pattern
No.
Surfacing
Products
Pattern
No.
Pattern
Name
4791-52
Willowstone
4793-60
Windswept
48
X
72
X
30 x
96 120
144
X
X
X
X
X
X
48
72
36 x
96
120
144
48
72
48 x
96
120
144
48
72
X
X
X
X
X
X
X
X
X
X
X
X
X
60x
96
120
144
X
X
X
X
X
X
4794-60
Winswept Bronze
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4795-60
Windswept Pewter
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4796-60
Burnished Chestnut
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4798-60
Burnished Ember
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4799-7
Galactic Black
X
X
X
X
X
X
X
X
X
X
4810-60
Titanium Ev
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4811-60
Silicon Ev
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4812-60
Radium EV
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4813-60
Nickel Ev
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4814-60
Tungsten EV
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4820-60
Carbon EV
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4823-60
Antique Brush
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4830K-18
Satin Stainless
X
X
X
X
X
X
4834-38
Natural Roca
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4835-38
Tumbled Roca
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4836-38
Villa Roca
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4837-38
Terra Roca
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4838-38
Antique Roca
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4839-38
Coral Roca
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4841-60
Desert Zephyr
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4842-60
Canyon Zephyr
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4843-60
Misted Zephyr
X
X
4844-60
Londen Zephyr
4845-60
Twilight Zephyr
X
4846-60
Morro Zephyr
X
4847-38
Mission Smoke
X
4848-38
Mission Sage
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4849-38
Mission Adobe
X
X
X
X
X
X
X
X
X
X
X
X
4850-38
Mission Stucco
X
X
X
X
X
X
X
X
X
X
X
X
4851-38
Mission Sand
X
X
X
X
X
X
X
X
X
X
X
X
4852-38
Mission Shadow
X
X
X
X
X
X
X
X
X
X
X
X
4858-60
Crisp Zephyr
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4859-60
Spiced Zephyr
X
X
X
4860-7
Silver Alchemy
X
X
X
4861-7
Gold Alchemy
4862-7
Sandy Topaz
4864-52
Jeweled Sapphire
X
X
X
X
X
X
X
4865-52
Jeweled Opal
X
X
X
X
X
X
X
4866-52
Jeweled Coral
X
X
X
X
X
X
X
4867-52
Jeweled Mica
X
X
X
X
X
X
X
4869-60
Western White
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4870-60
Western Tan
X
X
X
X
X
X
X
X
X
X
X
X
X
4871-60
Western Suede
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4872-60
Western Storm
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4873-60
Western Bronze
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4874-60
Western Hills
X
X
X
X
X
X
X
X
X
X
X
X
X
4875-60
Western Iron
X
X
X
X
X
X
X
X
X
X
X
X
X
4876-38
Sheer Mesh
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4877-38
Grey Mesh
X
X
X
X
X
X
X
X
X
X
X
X
4879-38
Steel Mesh
X
X
X
X
X
X
X
X
X
X
X
X
4880-38
Carbon mesh
X
X
X
X
X
X
X
X
X
X
X
X
4881-38
Copper Mesh
X
X
X
X
X
X
X
X
X
X
X
X
4882-38
Oiled Soapstone
X
X
X
X
X
X
X
X
X
X
X
X
4883-38
Sable Soapstone
X
X
X
X
X
X
X
X
X
X
X
X
X
4883-38
Pearl Soapstone
X
X
X
X
X
X
X
X
X
X
X
X
X
4
X
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Tan Soapstone
4888-38
Rustic Slate
4890-52
Milano Blaze
4891-52
Milano Rosso
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
48 x
96
120
144
X
X
X
X
X
X
48
72
60x
96
120
X
X
X
X
X
X
X
X
144
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4892K-01
Polished Mosaic
X
X
X
X
X
X
X
X
X
X
X
X
4893K-60
Tumbled Mosaic
X
X
X
X
X
X
X
X
X
X
X
X
4894K-01
Girona Falls
X
X
X
X
X
X
X
X
X
X
X
X
4895K-01
Girona Envy
X
X
X
X
X
X
X
X
X
X
X
X
4896K-01
Girona Beach
X
X
X
X
X
X
X
X
X
X
X
X
4897K-01
Girona Cavern
X
X
X
X
X
X
X
X
X
X
X
X
4898K-01
Girona Cliff
X
X
X
X
X
X
X
X
X
X
X
X
4899K-01
Frosted Glass
X
X
X
X
X
X
X
X
X
X
X
X
4900K-01
Sea Glass
X
X
X
X
X
X
X
X
X
X
X
X
4901K-01
Bottle Glass
X
X
X
X
X
X
X
X
X
X
X
X
4902K-38
Mercury Glass
X
X
X
X
X
X
X
X
X
X
X
X
4903K-38
Antique Glass
X
X
X
X
X
X
X
X
X
X
X
X
4904K-38
Desert Springs
X
X
X
X
X
X
X
X
X
X
X
X
4905K-38
Spicewood Springs
X
X
X
X
X
X
X
X
X
X
X
X
4906K-38
Willow Springs
X
X
X
X
X
X
X
X
X
X
X
X
4907K-38
Deep Springs
X
X
X
X
X
X
X
X
X
X
X
X
4908K-60
White Tea
X
X
X
X
X
X
X
X
X
X
X
X
4909K-60
Ginseng Tea
X
X
X
X
X
X
X
X
X
X
X
X
4910K-60
Chai Tea
X
X
X
X
X
X
X
X
X
X
X
X
4911K-38
Soft Gold Mesh
X
X
X
X
X
X
X
X
X
X
X
X
4912K-38
Gilded Mesh
X
X
X
X
X
X
X
X
X
X
7039K-78
Windsor Mahogany
7040K-78
Figured Mahogany
7054-60
Wild Cherry
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7061-60
Natural Pear
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7110K-78
Montana Walnut
X
X
X
X
X
X
X
X
X
X
X
X
7122T-7
Empire Mahogany
7209K-78
Nepal Teak
X
X
X
7806-60
Bannister Oak
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7816-60
Solar Oak
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7850-60
Beigewood
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7885K-78
English Oak
7888-60
Golden Oak
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7908-60
Sanibel Maple
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7909-60
Fusion Maple
X
X
X
X
X
X
X
X
X
X
X
X
X
7911-60
Manitoba Maple
X
X
X
X
X
X
X
X
X
X
X
X
X
7921-38
Tuscan Walnut
X
X
X
X
X
X
X
X
X
X
X
X
7922-7
Brighton Walnut
X
X
X
X
X
X
7923-7
Versailles Anigre
X
X
X
X
X
X
7924-7
Biltmore Cherry
X
X
X
X
X
7925-38
Monticello Maple
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7928-38
Castle Oak
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7929-38
Huntington Maple
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
7935-7
Shaker Cherry
7936-7
Williamsburg Cherry
X
7937-38
River Cherry
X
7938-38
New Age Oak
7939K-18
Blond Echo
7941K-18
Tan Echo
7942-7
Cocobala
7943-7
Columbian Walnut
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Sinks
4887-38
X
X
72
Edgebanding
& Veneers
X
X
48
Adhesives
& Caulk
X
144
Decorative
Hardware
X
120
Green Soapstone
36 x
96
Shelving
& Hardware
4885-38
72
Screws &
Fasteners
X
48
Storage &
Convenience
X
144
Wood
Products
X
X
30 x
96 120
Lighting
Flamed Soapstone
72
Cabinet Locks
& Latches
4884-38
48
Abrasives
Pattern
Name
5
& Machines
Pattern
No.
Surfacing
Products
Pattern
No.
Pattern
Name
7944K-01
Madagascar
7945K-18
Xanadu
7946-38
Brazilwood
7947K-18
Rio
7949-18
Asian Night
X
X
X
X
7951K-18
Asian Sun
X
X
X
X
48
72
30 x
96 120
X
X
144
48
72
X
36 x
96
120
144
X
X
X
48
72
X
X
X
X
X
X
X
48 x
96
120
X
144
48
72
X
60x
96
120
X
X
X
X
X
X
X
X
X
X
X
X
144
X
X
X
X
X
X
X
X
7952K-18
Asian Sand
X
X
7953K-38
Harvest Maple
X
X
X
X
X
X
X
X
X
X
X
X
7954K-38
Natural Rift
X
X
X
X
X
X
X
X
X
X
X
X
7955K-38
Chardonnay
X
X
X
X
X
X
X
X
X
X
X
X
7956K-78
Honduran Mahoganey
X
X
X
X
7957K-78
Zanzibar
X
X
X
X
7958K-78
Kenya Mahoganey
X
X
X
X
7959K-78
Hampton Walnut
X
X
X
X
7960K-18
Studio Teak
X
X
X
X
7961K-18
Yarrow
X
X
X
X
7962K-18
Aloe
X
X
D14-60
Port
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D25-60
Atlantis
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D30-60
Natural Almond
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D307-60
Hollyberry
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D315-60
Platinum
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D321-60
Brittany Blue
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D327-60
Pepperdust
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D331-60
Sand
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D354-60
Designer White
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D379-60
Indigo
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D381-60
Fashion Grey
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D391-60
Cloud
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D403-60
White Sand
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D417-60
Lapis Blue
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D431-60
Alabaster
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D439-60
Wallay
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D456-60
Café Crème
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D478-60
Amazon
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D50-60
Khaki Brown
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D72-60
Featherstone
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D79-60
Hunter Green
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D90-60
North Sea
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D91-60
Slate Grey
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D92-60
Dove Gray
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D96-60
Shadow
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
D97-60
Haze
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Think of ISC Surfaces
for all your product
needs!
6
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Unit # 3494005
Sinks
CUSTOM EDGE PROFILES
Custom Edge Profiles
Contact your ISC Surfaces representative for complete information and pricing.
7
& Machines
Surfacing
Products
Custom Edge Profiles
Decorative Metal Surfaces
Unit # 3494003
DECORATIVE METAL PRODUCT INFORMATION
Decorative Metal Surfaces
8
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Solid Surface Products
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Unit # 3929006
www.ISCsurfaces.com!
Visit our Web site at
9
& Machines
Surfacing
Products
SOLID SURFACE PRODUCT INFORMATION
Unit # 3929007
SOLID SURFACE PRODUCT INFORMATION
for all your product needs!
10
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
Decorative Metals
Unit # 3585001
Chemetal is a collection of metal laminates with and without hpl/phenolic backing. Chemetal laminates are recommended for interior use only on vertical and light duty horizontal surfaces. When used on horizontal surfaces a protective layer of glass or equivalent material should be used.
All Chemetal metallic laminates are supplied with a protective mask.
Please contact your ISC Surfaces representative for samples, literature and questions concerning the care and use of Chemetal.
96 x 24
Base Metal
HPL
Solid Metal
101
Windows
X
Aluminum
.020
102
Micro-steel
X
Aluminum
.020
103
Grille
X
Aluminum
104
Mirror
X
200 SERIES
Aluminum
.020
Aluminum
.055
214
Diamondback
X
Aluminum
.055
216
Footplate
X
Aluminum
.055
217
Reptilian
X
Copper
.055
218
Cobblestone
X
Copper
.055
220
Venetian wave
X
Aluminum
.055
221
Argenta
X
Aluminum
.055
223
Chromium
X
Aluminum
.055
226
Venetian vertical
X
Aluminum
.055
227
Venetian horizontal
X
Aluminum
.055
230
Moonscape
X
Copper
.055
233
Honeycomb
X
Aluminum
.055
238
Autumn leaves
X
Copper
.055
241
Sienna
X
Copper
.055
244
Pewter wave
X
Aluminum
.055
251
Sonoma
X
Copper
.055
253
Metropolis
X
Aluminum
.055
260
Champagne leaf
X
Aluminum
.055
262
Red rock
X
Copper
.055
263
Copper city scape
X
Copper
.055
264
Pewter vines
X
Aluminum
.055
Aluminum
.055
X
Wanderlust
X
268
Extrovert
X
Aluminum
.055
269
Apollo
X
Aluminum
.055
270
Fossil
X
Aluminum
.055
272
Venetian copper aluminum
X
Aluminum
.055
273
Venetian stainless aluminum
X
300 SERIES
Aluminum
.055
309
Etruscan B w/ seam
Brass
.043
310
Antiqued brushed
313
Renaissance
X
X
Brass
X
X
X
Copper
.043
314
Mayan
X
X
Copper
.043
315
Canterbury
X
X
Copper
.043
317
Aurora
X
X
Copper
.043
318
Essex
X
X
Copper
.043
325
Statuary
327
Melrose w/ seam
X
X
Brass
X
.016
.055
X
Brass
Lighting
Revere
267
Cabinet Locks
& Latches
265
X
.042
.055
Shelving
& Hardware
Copper
X
Screws &
Fasteners
X
Lunaria
.025
Storage &
Convenience
Sunburst
.055
Wood
Products
211
213
X
Name
Thick.
In.
Phenolic
Abrasives
Style No.
Product Availability
Dim. In.
LxW
120 x 24
96 x 48
120 x 48
100 SERIES
.016
.042
.016
.043
11
& Machines
Decorative Metals
Decorative
Hardware
Adhesives
& Caulk
Chemetal provides a Technical Information brochure covering storage and handling, fabrication, cleaning and other important information. Fabricators must read and
become familiar with this information.
Edgebanding
& Veneers
DECORATIVE METALS
Decorative Metals
96 x 24
Dim. In.
LxW
120 x 24
96 x 48
Style No.
Name
120 x 48
Base Metal
HPL
328
Caramel w/ seam
X
X
Brass
.043
333
Franklin embossed & antiqued
X
X
Aluminum
340
Monet
X
X
Copper
Thick.
In.
Phenolic
Solid Metal
.050
.020
.043
343
Meteor
X
Copper
.043
344
Striations
X
Copper
.043
346
Graphite
X
X
Aluminum
347
Granite chief
X
X
Aluminum
380
Weathered solid steel
X
400 SERIES
.020
.020
.025
.025
406
Circles
X
Aluminum
.043
407
Kaleidoscope
X
Aluminum
.043
.020
413*
Linear
X
Aluminum
.043
.020
X
.020
414
Nomadic
X
X
Aluminum
.050
417
Nomadic antiqued
X
X
Aluminum
.055
.025
420*
Cascade
X
X
Aluminum
.050
.020
X
X
Aluminum
423
Swirled copper
427*
Placid
440*
Crescendo
X
X
Aluminum
.050
.020
443
Plume
X
X
Aluminum
.050
.020
444
Feathered
X
X
Aluminum
449
Ripple
X
Aluminum
.050
.020
450
Cyclone
X
Aluminum
.050
.020
451
Serpentine
X
Aluminum
.050
.020
452
Ribbon
X
Aluminum
.050
.020
453
Stripes
X
Aluminum
.050
.020
454
Fireworks
X
Aluminum
.050
.020
456
Twilight
X
Aluminum
.050
.020
457
Bounce
X
Aluminum
.050
.020
460
Dolphins
X
500 SERIES
Aluminum
.050
.020
501*
Noodle bar
X
X
Aluminum
.050
.020
502*
Unagi
X
X
Aluminum
.050
.020
503*
Hamachi
X
X
Aluminum
.050
.020
504*
Grasshopper
X
X
Aluminum
.050
.020
505*
Butterfly Effect
X
700 SERIES
X
Aluminum
.050
.020
701
Polished aluminum
X
X
Aluminum
.037
702
Brushed aluminum
X
X
Aluminum
.037
12
X
X
Copper
.042
.020
.043
.043
703
Polished brass aluminum
X
X
Aluminum
.037
704
Brushed light brass aluminum
X
X
Aluminum
.037
706
Satin copper
X
X
Copper
.037
710
Brushed stainless steel
719
Satin silver aluminum
X
727
Light stainless steel aluminum
791
Natural brushed aluminum
796
.020
Steel
.037
X
Aluminum
.037
X
X
Aluminum
.037
X
X
Aluminum
.032
Stainless steel aluminum
X
X
Aluminum
.032
720
Brushed smoked aluminum
X
X
Aluminum
.032
721
Oiled bronze aluminum
X
800 SERIES
X
Aluminum
.032
801
Polished chrome
X
X
Brass
.042
.016
802
Satin chrome
X
X
Brass
.042
.016
803
Polished solid brass
X
X
Brass
.042
.016
804
Satin solid brass
X
X
Brass
.042
.016
806
Satin solid copper
X
X
Copper
.042
.016
812
Satin smoked chrome
X
X
Brass
.042
.016
814
Satin golden bronze
X
X
Bronze
.042
.016
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
96” x 40” only
.016
.020
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
901
Polished aluminum
X
X
Aluminum
.055
902
Brushed aluminum
X
X
Aluminum
.055
.025
903
Polished brass aluminum
X
X
Aluminum
.055
.025
904
Brushed light brass aluminum
X
X
Aluminum
.055
.025
906
Brushed copper aluminum
X
X
Aluminum
.055
.025
908
Satin black aluminum
X
X
Aluminum
.055
.025
909†
Satin silver aluminum
X
X
Aluminum
.055
.025
910
Satin gold aluminum
X
X
Aluminum
.055
.025
911
Polished smoked aluminum
X
X
Aluminum
.055
.025
912
Satin bronze aluminum
X
X
Aluminum
.055
.025
914
Cross brushed aluminum
X
X
Aluminum
.055
.025
915
Brushed brass aluminum
X
X
Aluminum
.055
.025
916
Brushed pewter aluminum
X
X
Aluminum
.055
.025
917
Brushed black aluminum
X
X
Aluminum
.055
.025
924
Bronze stainless steel aluminum
X
X
Aluminum
.055
.025
925
Brushed med. bronze aluminum
X
X
Aluminum
.055
.025
927
Light stainless steel aluminum
X
X
Aluminum
.055
.025
928
Clear ambient aluminum
X
X
Aluminum
.055
.025
929
Stainless ambient aluminum
X
X
Aluminum
.055
.025
Surfacing
Products
Edgebanding
& Veneers
HPL
.025
Name
Adhesives
& Caulk
Base Metal
Solid Metal
Style No.
Decorative
Hardware
120 x 48
Thick.
In.
Phenolic
96 x 24
Dim. In.
LxW
120 x 24
96 x 48
900 SERIES
Sinks
Decorative Metals
Shelving
& Hardware
* Also available in tints.
† Also available in 96” x 1/2” strips.
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Not all the products
we carry are listed
in this catalog.
If you don’t see what
you’re looking for,
please contact
your local branch
for assistance.
Cabinet Locks
& Latches
We have FIVE locations
to serve you:
13
& Machines
Abrasives
• Kansas City, KS
• Wichita, KS
• Springfield, MO
• Oklahoma City, OK
• Tulsa, OK
Veneer Sheets & Butcher Block Countertops
Unit # 3585005
Unit # 3585006
VENEER SHEETS
VENEER SHEETS
Measures 96” L x 48” W.
Ideal for commercial interiors. Prefinished,
postformable,
HPLbacked, furniture-grade. Measures
96” L x 48” W x .039” thick.
No.
Desc.
6010196048HPL
6010296048HPL
Maple frise
Maple birdseye
6010496048HPL
6020496048HPL
6021096048HPL
6030396048HPL
6030496048HPL
6040396048HPL
6040496048HPL
6040596048HPL
Maple straight grain
White oak straight grain
White oak DeCape crown
Mahogany burl
Old English mahogany straight grain
Walnut burl
Walnut straight grain
American walnut crown
6050796048HPL
6060196048HPL
Anigre figured
Old cherry frise
6060296048HPL
6060496048HPL
Cherry birdseye
Cherry straight grain
6060996048HPL
6070496048HPL
Cherry beeswing
Wenge straight grain
6070596048HPL
6080496048HPL
Wenge crown
Teak straight grain
6081296048HPL
6090496048HPL
6100396048HPL
6110496048HPL
6111296048HPL
6140396048HPL
6200596048HPL
6220496048HPL
6230496048HPL
6260596048HPL
6280796048HPL
6290496048HPL
6310496048HPL
6320496048HPL
6330496048HPL
6340496048HPL
6350496048HPL
6360496048HPL
6380496048HPL
6390496048HPL
6400496048HPL
6410496048HPL
6420496048HPL
6430896048HPL
6440496048HPL
6540496048HPL
9999996048HPL
9999896048HPL
Teak sabiatta
Zebrawood straight grain
Coffee bubinga burl
Ebony straight grain
Ebony sabiatta
Fruitwood burl
Black Macassar B&W crown
Gray oak straight grain
Black oak straight grain
Green willow crown
Silver ash figured
Palmwood straight grain
Sangria bubinga burl
Red mahogany straight grain
Wenge gloss
Salsawood straight grain
White Macassar straight grain
Lapiswood straight grain
Sierra birch figured
Asian cherry straight grain
Madagascar ebony straight grain
Nantucket oak straight grain
Ebony safari straight grain
Dark walnut mix/match
Kiawah oak straight grain
Coast redwood straight grain
Violetta
Honey burl
14
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
No.
Desc.
Unfinished Collection – Paper Backing
Thick.
In.
6800196048PAP
.020
6800296048PAP
Gray oak straight grain
.020
6800396048PAP
.020
6800496048PAP
.020
6800596048PAP
.020
6800696048PAP
White oak straight grain
.020
6800796048PAP
Mahogany straight grain
.020
6800896048PAP
Cherry straight grain
.020
6800996048PAP
Walnut straight grain
Woven Woods Collection – Flexible Mat Backing
.020
6950096048FMB
Wenge intricate
.039
6950196048FMB
European cherry intricate
.039
6950296048FMB
Black oak herringbone
.039
6950396048FMB
Zebrawood herringbone
.039
6950496048FMB
Wenge herringbone
.039
6950696048FMB
Black walnut square
.039
6950796048FMB
Wenge square
.039
6950896048FMB
White oak diamond
.039
6950996048FMB
Makore diamond
.039
6951096048FMB
Canyonlands
.039
6951196048FMB
Escalante
FSC Collection – HPL Backing
.039
7000096048FSC
.039
7000196048FSC
Old English mahogany straight grain
.039
7000296048FSC
.039
7000396048FSC
.039
7000496048FSC
.039
Veneer Sheets & Butcher Block Countertops
Unit # 3449001
BUTCHER BLOCK COUNTERTOPS
Northern hard maple construction with
butt-joint face laminations, square edge
and Durakryl® 102 acrylic finish. Measures 25” W x 1-1/2” thick.
Lgth.
In.
No.
ACA01225
12
ACA01825
18
ACA02425
24
ACA03625
36
ACA04225
42
ACA04825
48
ACA06025
60
ACA07225
72
ACA09625
96
Custom sizes available.
Contact your ISC Surfaces representative
for details.
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3929004
Provides
seamless
transition
from countertop to
basin. Ergonomic
design eliminates
hard edges; builtin shelf channels
water away from
countertop. Thermal-formed acrylic
construction resists staining. Measures 33” L x 21” W x
9” D overall. Satin finish.
Provides seamless transition from countertop to
basin. Ergonomic design
eliminates hard edges;
built-in shelf channels
water away from countertop. Thermal-formed
acrylic
construction
resists staining. Measures 20-1/2” L x 17-1/2”
W x 7” D overall. Satin
finish.
No.
True white
HD530IVORY
Ivory
Unit # 3929003
Ivory
Unit # 3929005
INTEGRATED SINKS
SINK ACCESSORIES
Double Bowl – Offset – HD®
HD®
No.
HD1006782
Desc.
SK300L104
SK300L105
SK300MIXERTIP
Right Offset
DB6040L
Rough cut straight trim bit
HD1006783
H1006784
Bevel bit
Replacement bearing
Sink adhesive, true white
Sink adhesive, ivory
Sink adhesive mixer tip
DB7030R
Screws &
Fasteners
Unit # 3609019
SELF-RIMMING SINKS
Double Equal Bowl – Profile Series
Left Offset
DB7030L
Provides seamless transition from countertop to basin.
Ergonomic design eliminates hard edges; built-in shelf
channels water away from countertop. Thermal-formed
acrylic construction resists staining. Measures 33” L x
21” W x 9” D overall. Satin finish.
No.
Finish
Right Offset
Constructed of 16ga. stainless steel with brushed finish.
Overall Dim. In.
No.
Desc.
LxWxD
True white
HD525IVORY
Ivory
Left Offset
HD520TRUEWHT
True white
HD520IVORY
Ivory
DB6040R
Dim. In.
No.
LxWxD
SR3322-8B
33 x 22 x 8
Small bowl on
right
DB6040L Small bowl on left
DB7030R
Small bowl on
right
31-7/8 x 20-3/4 x 9
31-7/8 x 20-3/4 x 9
31-1/2 x 20-1/2 x 9-1/4
DB7030L Small bowl on left 31-1/2 x 20-1/2 x 9-1/4
Lighting
HD525TRUEWHT
Integrated, Self-Rimming & Undermount Sinks
Unit # 3609015
Double Equal Bowl – Stainless Steel –
Profile Series
Provides seamless transition from countertop to
basin. Ergonomic design
eliminates hard edges;
built-in shelf channels
water away from countertop.
Thermal-formed
acrylic construction resists
staining. Measures 24-1/4”
L x 21” W x 9” D overall.
Satin finish.
HD500IVORY
Finish
True white
Ivory
Our customer service
department has the
answers you need!
Abrasives
Single Bowl – HD®
HD500TRUEWHT
Cabinet Locks
& Latches
UNDERMOUNT SINKS
Unit # 3929001
INTEGRATED SINKS
No.
Surfacing
Products
HD510IVORY
DB6040R
Finish
HD530TRUEWHT
Decorative
Hardware
Finish
True white
Large/Small Bowl – Stainless Steel – Profile
Series
Shelving
& Hardware
No.
HD510TRUEWHT
Unit # 3609016
UNDERMOUNT SINKS
Edgebanding
& Veneers
Single Bowl – Vanity – HD®
Adhesives
& Caulk
Double Bowl – HD®
Storage &
Convenience
INTEGRATED SINKS
Wood
Products
Unit # 3929002
INTEGRATED SINKS
Dim. In.
No.
LxWxD
DB5050X
32-1/4 x 18-1/4 x 8
15
& Machines
Sinks
Sinks
Integrated, Self-Rimming & Undermount Sinks
Undermount Sinks
Unit # 3609003
Unit # 3609006
UNDERMOUNT SINKS
UNDERMOUNT SINKS
Double Bowl – Offset – Stainless Steel
Single Bowl – Stainless Steel
Unit # 3609017
UNDERMOUNT SINKS
Single Bowl – Stainless Steel – Profile Series
L-UM11R
Constructed of 18ga. 18/10 chromium/nickel stainless
steel. Measures 31-3/4” L x 20-1/2” W overall. Small
bowl measures 13-3/8” W x 7-1/8” D. Large bowl measures 15-3/8” x 9” D.
SB3118X
No.
Desc.
L-UM11L
steel.
Dim. In.
No.
LxWxD
L-UM21
23-1/2 x 21-1/4 x 9-1/2
Small bowl on left
Unit # 3609007
L-UM11R
Small bowl on right
UNDERMOUNT SINKS
Unit # 3609005
UNDERMOUNT SINKS
SB2321D
Double Bowl – Offset – Stainless Steel
SB2317S
No.
Dim. In.
LxWxD
SB3118X
31-1/2 x 18-5/8 x 9-3/4
SB2321D
23-1/2 x 21 x 9
SB2317S
23 x 17-3/4 x 9
L-UM12R
steel. Measures 33-5/8” L x 20-3/8” W overall. Small
bowl measures 13” W x 7” D. Large bowl measures
17-5/8” x 9” D.
No.
Desc.
Undermount Sinks
Unit # 3609009
UNDERMOUNT SINKS
Triple Bowl – Stainless Steel
L-UM12L
Small bowl on left
L-UM12R
Small bowl on right
steel.
Dim. In.
No.
LxWxD
L-UM25
16-1/2 x 13 x 7-1/8
Unit # 3609008
UNDERMOUNT SINKS
Unit # 3609004
UNDERMOUNT SINKS
steel. Measures 46-1/2” L x 20-3/4” W overall.
Depth In.
No.
Large Bowls Small Bowl
L-UM33
9
steel.
Dim. In.
No.
OD x ID
Depth
7
L-UM27
18 x 16
Unit # 3609002
UNDERMOUNT SINKS
steel.
Dim. In.
No.
LxWxD
Double Bowl – Stainless Steel
L-UM23
steel.
Dim. In.
No.
LxWxD
L-UM05
16
7-1/4
Unit # 3609001
22-3/4 x 17-1/2 x 8-3/4
We appreciate
your business!
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
steel.
Dim. In.
32-1/4 x 18 x 9
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
UNDERMOUNT SINKS
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
No.
OD x ID
Depth
L-UMV47
16-3/4 x 14-1/4
7-1/4
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3611021
DROP-IN SINKS
Unit # 3609013
No.
Color
DYNASTYBI
Bisque
White
Unit # 3611020
LE-67
DROP-IN SINKS
LE-58R
Constructed of 16ga. stainless steel with brushed finish. Measures 22-1/4” W x 10” D overall.
Lgth.
No.
Desc.
In.
Constructed of 16ga. stainless steel with brushed finish. Measures 33” L x 22” W x 10” D overall.
LE-64
No.
Single bowl
33
LE-58L
LE-66
Double bowl
33
LE-58R
LE-67
Large/small bowl
36
Double Bowl – Intro
Desc.
Small bowl on left
Small bowl on right
Unit # 3609011
UNDERMOUNT SINKS
Undermount & Drop-In Sinks
Single Bowl – Stainless Steel – Elite Series
Unit # 3609012
UNDERMOUNT SINKS
Double Equal Bowl – Stainless Steel –
Elite Series
For installation in any type of countertop; countertop
must be cut out to accommodate integrated drain
board. Faucet deck accepts single-lever faucets; faucet may also be countertop mounted. Overall dimensions: 53” L x 18” W x 8-1/2” D. Requires 36”
minimum sink base.
No.
Color
INTROBI
Bisque
INTROWH
White
Unit # 3611016
DROP-IN SINKS
LE-53
Double Equal Bowl
For installation in any
type of countertop.
Accepts 3-, 4- or 5hole faucets. Overall
dimensions: 33” L x
22” W x 8” D.
Dim. In.
No.
LxWxD
No.
LE-55
Constructed of 16ga. stainless steel with brushed finish. Measures 18” W x 10” D.
Lgth.
In.
No.
LE-53
23
LE-55
Color
EQUALBOWLBI
Bisque
EQUALBOWLWH
White
Unit # 3611015
DROP-IN SINKS
Cabinet Locks
& Latches
32 x 19 x 10
Double Equal Bowl – Portland
30
Unit # 3609010
UNDERMOUNT SINKS
Our pledge is
dedication to outstanding
customer service.
Abrasives
Bar – Stainless Steel – Elite Series
No.
Dim. In.
LxWxD
LE-51
20 x 15 x 10
For installation in any type of countertop. Accepts 3-, 4or 5-hole faucets. Overall dimensions: 33” L x 22” W
x 8-1/2” D. Requires 36” minimum sink base.
No.
Color
PORTLANDBI
Bisque
PORTLANDWH
White
17
& Machines
LE-56
Shelving
& Hardware
DYNASTYWH
Screws &
Fasteners
LE-58L
Decorative
Hardware
For installation in any type of countertop. Faucet deck
ccepts single-lever faucets; faucet may also be countertop mounted. Features removable vegetable colander. Overall dimensions: 39-1/2” L x 20” W x 7-1/2”
D. Requires minimum 42” sink base.
LE-66
LE-64
Adhesives
& Caulk
Edgebanding
& Veneers
Triple Bowl – Dynasty
Storage &
Convenience
UNDERMOUNT SINKS
Large/Small Bowl – Stainless Steel –
Elite Series
Wood
Products
UNDERMOUNT SINKS
w/ Apron Front – Stainless Steel – Elite Series
Lighting
Unit # 3609014
Surfacing
Products
Sinks
Unit # 3611001
Unit # 3611009
UNDERMOUNT SINKS
UNDERMOUNT SINKS
Double Bowl – Newport
Large/Small Bowl – Sorrento
Unit # 3611017
DROP-IN SINKS
Single Bowl – Extra Large – Marquis
Resists heat, scratches, stains and bacteria. Features
fiberglass backing for impact resistance. Overall
dimensions: 31-5/8” L x 19” W x 9” D.
No.
For installation in any type of countertop. Accepts 3-, 4or 5-hole faucets. Overall dimensions: 33” L x 22” W
x 9” D. Requires minimum 36” sink base.
No.
MARQUISBI
Bisque
White
Bisque
NEWPORTWH
Color
MARQUISWH
Color
NEWPORTBI
White
dimensions: 31-7/8” L x 21-1/4” W x 9” D.
No.
Color
SORRENTOBI
Bisque
SORRENTOWH
White
Unit # 3611010
Unit # 3611024
UNDERMOUNT SINKS
UNDERMOUNT SINKS
Double Equal Bowl – Shelburne
Single Bowl – Monaco
Unit # 3611018
DROP-IN SINKS
Single Bowl – Medium – Mayfair
For use in kitchen or laundry
room applications. Installs
into any type of countertop.
Accepts 3-, 4- or 5-hole faucets. Overall dimensions:
25” L x 22” W x 10” D.
Requires minimum 27” sink
base.
No.
Color
MAYFAIRBI
Bisque
MAYFAIRWH
White
Resists heat, scratches, stains and bacteria. Overall
dimensions: 30-3/4” L x 17-5/8” W x 8-3/8” D.
No.
Color
SHELBURNBI
Bisque
SHELBURNWH
White
dimensions: 31” L x 19” W x 9” D.
No.
Color
MONACOBI
Bisque
MONACOWH
Unit # 3611011
White
Unit # 3611004
UNDERMOUNT SINKS
UNDERMOUNT SINKS
Large/Small Bowl – Kingston
Unit # 3611019
Single Bowl – Madrid
DROP-IN SINKS
Single Bowl – Small – Nina
For use in food prep or bar applications. Installs into
any type of countertop. Overall dimensions: 17-3/4” L
x 16-3/4” W x 6-1/2” D. Requires minimum 21” sink
base. Faucets must be mounted to countertop.
No.
Color
dimensions: 32-1/2” L x 19” W x 8-1/2” D.
No.
Color
KINGSTONBI
Bisque
KINGSTONWH
White
Bisque
NINAWH
White
MADRIDBI
Bisque
MADRIDWH
Unit # 3611008
NINABI
No.
Color
White
Unit # 3611003
UNDERMOUNT SINKS
UNDERMOUNT SINKS
Large/Small Bowl – Tuscany
Single Bowl – Monterey
Unit # 3611022
DROP-IN SINKS
Single Bowl – Oval – Dover
For
vanity
applications.
Installs in any type of countertop. Features integral faucet deck; accepts 1-, 2- or 3hole faucets. Overall dimensions: 20-3/4” L x 17-3/4” W
x 7” D. Note: Does not
include factory installed overflow.
No.
Color
DOVERBI
Bisque
DOVERWH
White
18
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
No.
Color
TUSCANYBI
Bisque
TUSCANYWH
White
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
No.
Color
MONTEREYBI
Bisque
MONTEREYWH
White
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3611007
Surfacing
Products
Undermount Sinks & Sink Installation Tools
Unit # 3611014
UNDERMOUNT SINKS
Single Bowl – Oxford
Large/Small Bowl – Concord
dimensions: 22” L x 16” W x 6-1/2” D.
Can be mounted to laminate, solid surface, engineered
stone or granite. Features integral recessed faucet
deck; accepts single-lever faucet and two accessories.
Overall dimensions: 31-7/8” L x 21-1/4” W x 9” D.
Requires 36” minimum sink base.
Sinks
UNDERMOUNT SINKS
Unit # 3611023
UNDERMOUNT SINKS
CONCORDWH
UNDERMOUNT SINKS
White
Unit # 3611026
Single Bowl – Windsor
SEAM ADHESIVES
Undermount Sinks & Sink Installation Tools
Unit # 3611002
UNDERMOUNT SINKS
Single Bowl – Del Mar
No.
Color
WINDSORBI
Bisque
WINDSORWH
White
Unit # 3611012
For installation of undermount sinks. Two-part acrylic
formula bonds to laminates and solid surfaces. 250mL
tube. Includes two mixing tips.
No.
Color
70001K
White
Double Equal Bowl – Hampton
70003K
Bisque
Screws &
Fasteners
UNDERMOUNT SINKS
Unit # 3611027
No.
Color
DELMARBI
Bisque
DELMARWH
White
Storage &
Convenience
SINK ACCESSORIES
Unit # 3611005
deck; accepts 1-, 2- or 3-hole faucets. Overall dimensions: 32” L x 21” W x 9” D. Requires 36” minimum
sink base.
No.
Color
Oval – York
HAMPTONBI
Bisque
HAMPTONWH
White
Unit # 3611013
UNDERMOUNT SINKS
Large/Small Bowl – Landin
No.
Color
YORKBI
Bisque
YORKWH
White
Phone or FAX
your order today!!
Strainer Basket
Plastic construction, color-matched to sinks. 3-1/2”
diameter.
Strainer Baskets. Should be installed with silicone to
ensure tight seal.
Disposal Flanges. For use if garbage disposal is
installed.
No.
Desc.
Color
00374
Strainer basket
00381
Strainer basket
Bisque
White
00916
Disposal flange
Bisque
00886
Disposal flange
White
Unit # 3611025
ADHESIVE GUNS
deck; accepts single-lever faucet and two accessories.
Overall dimensions: 31-7/8” L x 21-1/4” W x 9” D.
Requires 36” minimum sink base.
No.
Color
Abrasives
UNDERMOUNT SINKS
Adhesives
& Caulk
Color
Bisque
Decorative
Hardware
No.
CONCORDBI
Shelving
& Hardware
White
White
Unit # 3611006
Wood
Products
BENTONWH
OXFORDWH
Lighting
Bisque
Bisque
Cabinet Locks
& Latches
BENTONBI
Color
OXFORDBI
LANDINBI
Bisque
Provides 10:1 mix ratio during application of adhesive.
No.
Desc.
LANDINWH
White
ADHESIVEGUN
Adhesive gun
19
& Machines
No.
stone or granite. Faucets must be mounted to countertop. Overall dimensions: 23-3/8” L x 19” W x 8-3/4” D.
Requires minimum 27” sink base.
No.
Color
Edgebanding
& Veneers
Single Bowl – D-Shaped – Benton
NOTES
20
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Edgebanding & Veneers
Surfacing
Products
Sinks
PVC Edgebanding
Unit # 3009004
PVC EDGEBANDING
PVC Edgebanding
.018” Thick x 600’ L
.018” Thick x 1200’ L
3/4” W
7/8” W 15/16” W 5-1/4” W
15/16” W
Without Adhesive
1000 Paintable
.020” Thick x 600’ L
1” W
1-1/8” W
X
X
X
X
X*
X
X
1031 Dove Gray
X
X*
X
1035 Gray
X
X
X
1026 Slate Gray
X
X
1059 Neutral Gray
X
X
1060 Fog
X
1061 Oyster Gray
X*
X
X
X
X
X
Screws &
Fasteners
1052 Opti Gray
X
1065 Surf
X
X
X
X
X
X
1068 Dove Gray (Nevamar)
X
X
1071 Platinum
X*
X
1083 Silver
X
1087 Silver (Formica)
X
X
1097 Storm
X
1099 Platinum (Formica)
X
1120 Navy Blue
X
1125 Spectrum Blue
X
1126 Marine Blue
X
1133 Brittany Blue
X
1146 Larkspur
X
1149 Graphite Blue
X
1152 Dusty Jade
X
1153 Seaspray
X
1154 Atlantis
X
1155 Bluejay
X
1156 Blue Ice
X
1162 Bermuda
X
1170 Arctic Blue
X
1173 Indigo
X
1174 Aubergine
X
1175 Taupestone
X
1176 Shadowblue
X
1178 Slate (Formica)
X
1187 Kabuki Teal Vogue
X
X
X
X
Abrasives
1096 Pepperdust
Storage &
Convenience
1067 Black Pearl
X
X
1044 North Sea
1066 Folkstone
X
Shelving
& Hardware
1037 Shadow
X
Wood
Products
X
1-3/8” W
Lighting
1005 Black
7/8” W
Cabinet Locks
& Latches
5/8” W
X
21
& Machines
Color Code
For use on residential and office furniture, casegoods, fixtures and cabinetry. Features consistent color throughout to mask joint line between edge and face. Low gloss finish.
Without Adhesive. For use in automatic edgebanders.
Pre-Glued. Features pre-applied hotmelt adhesive; re-activate by hot air for bonding to substrate.
Note: Not for application with heat bar applicators or hand irons.
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Solids – Thin
PVC Edgebanding
Color Code
5/8” W
.018” Thick x 600’ L
3/4” W
7/8” W 15/16” W
1188 Pharoah Blue
X
1189 Regimental Blue
X
1192 Blue Silk
X
1194 Bluestone
X
1195 Colonial Blue
X
1198 Blackberry (Formica)
X
1199 Cloud
X
1236 Chiffon
X
1242 Marigold
X
1253 Ming Gold
X
1260 Sunray
X
1264 Saffron
X
1265 Sunlight
X
1267 Cafe Creme
X
1268 Juarez Flower
X
1344 Wildrose
X
1358 Cordovan
X
1366 Mauve Blush
X
1370 Moccasin
X
1371 Ivory Rose
X
1373 Raspberry
X
1375 Porcelain Rose
X
1379 Spectrum Red
X
1381 Royal Lavender
X
1383 Wineberry
X
1384 Thistle
X
1389 Hollyberry
X
1393 Mandarin Red
X
1395 Rose Buff
X
1396 Rose Ash
X*
1398 Cimarron
1401 White
5-1/4” W
.018” Thick x 1200’ L
15/16” W
7/8” W
.020” Thick x 600’ L
1” W
1-1/8” W
1-3/8” W
X
X
X
X
X
X
X
X
1443 Pearl
X
1449 Smoke White
X
X
X
X
X
1452 Antique White (Formica)
X
X
1454 Mission White
X
X
1456 Antique White
X*
1460 Frosty White
X
1463 White (Formica)
X*
1464 Neutral White
X
1465 Ice White
X
1472 Chalk White
X
1473 White
X
1474 Designer White
X
1484 Antique White (Nevamar)
1498 Bright White
X
X
X
X
1511 Desert Beige
X*
X
X
X
X
1554 Champagne
X*
1578 Antique White (Wilsonart)
X*
1582 Beige (Nevamar)
X
1587 Pumice
X
1591 Fiesta Bisque
X
1599 Indian Smoke
X
1619 Hunter Green (Formica)
X
1624 Silverpine
X
1629 Sage Green Vogue
X
1637 Tropic Jade
X
1640 Tyrol Green
X
22
X
X
X
X
1509 Vanilla
1543 Almond
X
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
X
X
X
X
X
X
X
X
X
X
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
X
1657 Imperial Green
X
1666 Midori
X
1667 Mallard Teal
X
1668 Teal Slate
X
1672 Bayou
X
1677 Dark Laurel
X
1683 Savannah
X
1693 Silver Moss
X
1694 English Ivy
X
1901 Port
X*
2002 Putty Gray
X
2005 Pewter
X
Sinks
X
1650 Oasis
X
2014 Haze
X
X
2016 Featherstone
X
X
X
2024 Fashion Gray
X
2026 Pebble
X
2030 Folkstone
X*
2031 Ecru
X
2035 Gunmetal
X
2037 Chinchilla
X
2038 Cordial Gray
X
2052 Raven
X
2054 Platinum Gray
X
2062 Fossil Gray
X
2066 Graystone
X
2067 Contract Gray
X
2075 Studio Gray
X
2076 Heather Gray
X
2078 Maritime Gray
X
2105 Impressionist Blue
X
2111 Lapis
X
2122 Shogun
X
X
X
2134 Patriot Blue
X
2135 Deep Blue
X
2136 Periwinkle
X
2137 Bluewing Teal
X
2146 Violine
X
2148 Cornflower Blue
X
2149 French Lilac
X
2307 Cherry
X
2308 Burgundy (Wilsonart)
X
2322 Rose Pearl
X
2324 Liberty Red
X
2325 Burgundy (Nevamar)
X
2326 Sangaree
X
2373 Carmen Red
X
2375 Marsala Red
X
2377 Vicuna
X
2381 Poppy
X
2382 Primrose
X
2390 Andes Clay
X
2401 Bright White
X
Wood
Products
X
2130 Fortuneberry
Lighting
X
Cabinet Locks
& Latches
2128 Lapis Blue
Abrasives
2125 Blue Bonnet
Edgebanding
& Veneers
X
1646 Shakers Green
1-3/8” W
Adhesives
& Caulk
X
1643 Nile
.020” Thick x 600’ L
1” W
1-1/8” W
Decorative
Hardware
1642 Hunter Green (Wilsonart)
7/8” W
X
.018” Thick x 1200’ L
15/16” W
Shelving
& Hardware
1641 Emerald (Wilsonart)
5-1/4” W
Screws &
Fasteners
.018” Thick x 600’ L
3/4” W
7/8” W 15/16” W
Storage &
Convenience
5/8” W
23
& Machines
Color Code
Surfacing
Products
PVC Edgebanding
PVC Edgebanding
Color Code
5/8” W
.018” Thick x 600’ L
3/4” W
7/8” W 15/16” W
2403 Precision White
X
2420 Fashion White
X
2422 Bone White
X
2431 Solid White (Nevamar)
X
2434 Mallow White
X
2439 Alabaster
X
2500 Birch
X
2513 Porcelain
X
2514 Almond
X*
2515 Doeskin (Formica)
X
2535 Putty (Nevamar)
X
2540 Khaki Brown
X
5-1/4” W
.018” Thick x 1200’ L
15/16” W
7/8” W
.020” Thick x 600’ L
1” W
1-1/8” W
1-3/8” W
X
2542 Champagne (Formica)
X
2545 Beige
X*
X
2547 Putty (Wilsonart)
X
X
2552 Light Beige
X*
X
2553 Doeskin (Wilsonart)
X
2559 Bisque (Wilsonart)
X
2560 Sand
X
2574 Neutra
X
2575 Champagne (Nevamar)
X
2584 White Sand
X
2603 Woodvine
X
2605 Montpellier
X
2606 Tibetan Jade
X
2613 Provence Pear
X
2614 Amaze
X
2615 Tuscan Olive
X
2617 Black Forest
X
2703 Concrete
X
2707 Light Mink
X
2708 Porcelain (Formica)
X
2709 Stone
X
2710 Bark
X
2715 Brown
X
2724 Driftwood
X
2728 Bethany Beige
X
2738 Foundry
X
2740 St. Croix Sky
X
3005 Sandpiper
X
3033 Cool Gray
X
3303 Regimental Red
X
3310 Natural Glaze
X
3500 Natural Beige
X
3507 Sail White
X
3508 Ivory
X
3524 Petal Beige
X
3539 Pongee
X
3540 Cashmere
X
3541 Fleece
X
3542 Spa White
X
3570 Wallaby
X
3571 Puma
X
1005 Black
X
X
Pre-Glued
1389 Hollyberry
1463 White (Formica)
X
X
X
1464 Neutral White
X
3500 Natural Beige
X
* Available in high gloss finish.
24
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
X
56056 Bordeaux
X
56064 Copper Beech
X
.018” Thick x 600’ L
.020” Thick x 600’ L
15/16” W 5/8” W 7/8” W 1-1/8” 1-3/8” W
Without Adhesive
X
56241 Char Gray Suede
X*
56329 Imperial Maple
X
56345 Provencal Maple
X
56469 Hardrock Maple II
X
56496 Shadow Oak
X
56500 Canyon Maple
X
56517 Canadian Oak
X
56518 Suomi Birch
X
56520 Rose Oak
X
X
56523 Sliced Red Oak
X
X
56524 Riviera Maple
X
X
56525 Pale Oak
X
56528 Limoges Pear
X
56531 Almond Contemporary
X
56533 Wild Cherry
X
5155 Hardrock Maple
X
X
X
5191 Bryan Maple
X
56534 Hardrock Maple III
X
X
5193 Amberwood
X
56572 Cabinet Oak
X
5214 Pearwood
X
56577 Desert Oak
X
5802 Finish Oak
X
56582 Secret
X
5848 Glazed Oak
X
56586 Corporate Walnut
X
5919 Honeytone Teak
X
56611 Montana Walnut
X
6259 Northern Oak
X
56612 Gold Dust
X
6310 English Oak I
X
X
56615 English Oak III
X
6366 Windsor Walnut
X
X
56618 Ginger Root
X
6461 Lacewood
X†
56619 Windsor Mahogany
X
6526 Natural Oak I
X
X
56625 Congo Spruce
X
6571 Nantucket Birch
X
X
56631 Cherry Birch
X
6642 Winchester Walnut
X
X
56632 Colonial Cherry
X
6708 Solar Oak
X
56633 Gourmet Oak
X
6770 Woodland Rose
X
X
56634 Honey Maple
X
6789 Golden Oak
X
X
56635 Select Cherry
X
6798 Jeppe Oak
X
X
57048 Candlelight
X
6866 Figured Mahogany
X
X
57055 Natural Maple
X
6908 Nepal Teak
X
X
58029 Font Hill Pear
7007 Cherry
X
7103 Graceful Oak
X
7295 Sapelli Mahogany
X
X
58229 Monticello Maple
7301 Doeskin Graceful Oak
X
X
58772 Cocobolo
7343 Castle Oak
X
7346 Bannister Oak
X
5214 Pearwood
X
7350 Albany Oak
X
6708 Solar Oak
X
7423 June Mahogany
X
X
X
7489 English Oak II
X
X
6908 Nepal Teak
X
7568 Fusion Maple
X
X
7350 Albany Oak
X
X
7568 Fusion Maple
X
7731 Miyuki Birch
X
X
7734 Manitoba Maple
X
56518 Suomi Birch
X
7813 Renaissance Oak
X
56533 Wild Cherry
X
7872 Crown Cherry
X
56615 English Oak III
X
7890 Ontario Oak
X
X
7913 Captive Maple
X
X
7937 Porto
X
X
7673 Brazilian Walnut
X
58038 American Cherry
X
Shelving
& Hardware
X
X
Storage &
Convenience
X
X
X‡
X‡
58072 Irish Maple
X
Lighting
Color Code
56232 Fusion Maple
X
Cabinet Locks
& Latches
X
Pre-Glued
Abrasives
For use on residential and office furniture, casegoods, fixtures and cabinetry. Features consistent color throughout to mask joint line between edge and face. Low
gloss finish.
Pre-Glued. Features pre-applied hotmelt adhesive; re-activate by hot air for bonding
to substrate.
Edgebanding
& Veneers
56025 Sovereign Cherry
Adhesives
& Caulk
X
Woodgrains – Thin
Decorative
Hardware
56024 Mahogany Imp.
X
PVC EDGEBANDING
Screws &
Fasteners
X
55039 Light Maple
Wood
Products
7977 Majestral Maple
Unit # 3009005
Sinks
.018” Thick x 600’ L
.020” Thick x 600’ L
15/16” W 5/8” W 7/8” W 1-1/8” 1-3/8” W
X
* Medium gloss finish.
† High gloss finish.
‡ Available in 1000’ length by special order.
25
& Machines
Color Code
Surfacing
Products
PVC Edgebanding
PVC Edgebanding
.018” Thick x 600’ L
15/16” W
Color Code
Unit # 3009006
PVC EDGEBANDING
Patterns – Thin
For use on residential and office furniture, casegoods, fixtures and cabinetry. Features consistent color throughout to mask joint line between edge and face. Manufactured without adhesive for use in automatic edgebanders. Low gloss finish.
.018” Thick x 600’ L
Color Code
15/16” W
7/8” W
9000 Hunter Nebula
X
9002 Graphite Nebula
X*
9003 White Nebula
X
9004 Beige Nebula
X
9005 Blue Nebula
X
9007 Sand Nebula
X
9008 Gray Nebula
X
9009 Mauve Nebula
X
9010 Blush Nebula
X
9011 Cloud Nebula
X
9015 Storm Gray
X
9016 Stone
X
9017 Folkstone
X
9018 Mousse
X
9019 Beige
X
9020 Rose Ash
X
9021 Dusty Jade
X
9022 Bayou
X
9023 Graphite (Formica)
X
9024 Jave
X
9025 Berry
X
9032 Gray Glace
X
9058 French Blue
X
9059 Teal
X
9061 Charcoal
X
9062 Peacock Green
X
9064 Phantom Gray
X
9065 Amethyst
X
9066 Gray
X
9067 Sage
X
9068 Neutra
X
9069 Taupe
X
9070 Mesa
X
9071 Green
X
9077 Navy
X
9078 Rose
X
9081 Orchid Mist
X
9083 White Studio
X
9086 Greige
X
9087 Cinder Gray
X
26
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
9088 Mauve
X
9089 Aubergine
X
9095 Teal Slate
X
9096 Blueberry
X
9097 Birch
X
9098 Straw
X
9099 Burgundy
X
9100 Shell
X
9112 Natural Nebula
X
9113 Storm Nebula
X
9114 Teal Nebula
X
9124 Navy Grafix
X
9127 Porcelain
X
9157 Shale Green
X
9176 Neutral Glace
X
9188 Dove Moraine
X
9190 Bronze Legacy
X
9225 Blackstar Granite
X
9247 Caldera Beige
X
9248 Almond Leather
X
9293 Caldera Rose
X
9324 Mystique Dawn
X
9327 Mystique Night
X
9428 Tawny Legacy
X
9432 Gray Pampas
X
9463 Brushed Pewter
X
9551 Slipstream Capri
X
9557 Titanium EV
X
9560 Nickel EV
X
9561 Tungsten EV
X
9565 Copper EV
X
9566 Lithium EV
X
9567 Carbon EV
X
9568 Pampas
X
9572 Navy Legacy
X
9573 Beige Pampas
X
7/8” W
X
* Also available with pre-applied hotmelt adhesive.
Proudly Serving
Kansas, Missouri
& Oklahoma
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
PVC Edgebanding
Unit # 3009001
PVC EDGEBANDING
1005 Black
X
1026 Slate Gray
X
1031 Dove Gray
X
X
X
X
X
X
X
X
X
X
X
1035 Gray
1044 North Sea
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1096 Pepperdust
X
X
X
1120 Navy Blue
X
X
X
X
X
X
X
X
X
X
X
1146 Larkspur
X
X
X
1152 Dusty Jade
X
X
X
1154 Atlantis
X
X
X
1173 Indigo
X
X
X
X
X
X
X
X
X
X
1125 Blue
X
1176 Shadow Blue
1187 Teal
X
1242 Marigold
1267 Cafe Creme
X
X
1366 Mauve Blush
X
X
X
1370 Moccasin
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1372 Mauve
X
1373 Bordeaux
1379 Red
X
1383 Wineberry
X
X
1384 Thistle
1389 Hollyberry
1460 Frosty White
X
X
X
X
1463 White
X
X
X
X
1474 Designer White
X
X
X
X
1578 Antique White
X
X
X
X
1587 Pumice
X
X
X
X
1599 Indian Smoke
X
1619 Hunter Green
X
X
1624 Silverpine
1666 Midori
1901 Port
Lighting
1344 Wildrose
Cabinet Locks
& Latches
1133 Brittany Blue
X
Screws &
Fasteners
X
Storage &
Convenience
X
1071 Platinum
Shelving
& Hardware
X
Abrasives
1066 Folkstone
X
X
Wood
Products
1065 Surf
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
27
& Machines
1060 Fog
X
X
For use on residential and office furniture, casegoods, fixtures, cabinetry, and other applications requiring durability, impact resistance and absence of sharp edges. Features color throughout thickness, and UV-cured topcoat to resist abrasion.
1mm Thick x 400’ L
Low Gloss
Low Gloss, Textured
Low Gloss
Medium Gloss
Color Code
15/16” W
1-1/8” W
1-3/8” W
15/16” W
1-3/8” W
1-5/8” W
15/16” W
15/16” W
1-5/16” W
1-5/8” W
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Solids – Medium/Thick
PVC Edgebanding
Color Code
Low Gloss
15/16” W
1-1/8” W
1-3/8” W
Low Gloss, Textured
15/16” W
1-3/8” W
1-5/8” W
Low Gloss
15/16” W
Medium Gloss
15/16” W
1-5/16” W
1-5/8” W
2014 Haze
X
X
X
2016 Featherstone
X
X
X
X
X
X
2026 Pebble
X
X
X
2035 Gunmetal
X
X
X
2122 Shogun
X
X
X
2024 Fashion Gray
2149 French Lilac
X
X
X
X
X
X
X
X
2314 Regimental Red
2514 Almond
X
X
X
X
X
X
X
X
X
X
2540 Khaki Brown
X
X
X
2545 Beige
X
X
X
2547 Putty
X
X
X
2552 Light Beige
X
X
X
2715 Brown
X
X
X
Unit # 3009002
PVC EDGEBANDING
Woodgrains – Medium/Thick
For use on residential and office furniture, casegoods, fixtures, cabinetry, and other applications requiring durability, impact resistance
and absence of sharp edges. Features color throughout thickness, and UV-cured topcoat to resist abrasion.
Color Code
Low Gloss
15/16” W
1-1/8” W
Low Gloss
1-1/8” W
Low Gloss
Medium Gloss
15/16” W
1-5/16” W
15/16” W
5214 Pearwood
X
6366 Windsor Walnut
X
X
X
X
X
X
7295 Sapelli Mahogany
X
X
7423 June Mahogany
X
X
7489 English Oak
X
X
7568 Fusion Maple
X
X
7913 Captiva Maple
X
X
7937 Porto
X
X
56025 Sovereign Cherry
X
X
X
56523 Sliced Red Oak
X
X
56524 Rivera Maple
X
X
56533 Wild Cherry
X
X
X
X
6789 Golden Oak
56534 Hardrock Maple III
X
X
56582 Secret
X
56611 Montana Walnut
X
56618 Ginger Root
X
X
56631 Cherry Birch
X
X
56634 Honey Maple
X
X
X
58038 American Cherry
58072 Irish Maple
28
X
X
58029 Font Hill Pear
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
X
X
56643 Summer Flame
57048 Candlelight
X
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
X
X
X
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
PVC & Melamine Edgebanding
Unit # 3009014
3256-0045 Paintable
1444
Pre-Glued
Flexibility allows use on corners and curved furniture edges with radius as small as
3/4”; can also be used in high-speed straight line applications. Will not whiten or delaminate. Low gloss finish.
Color Code
15/16” W
1-3/8” W
X
1031 Dove Gray
X
1133 Brittany Blue
X
1460 Frosty White*
X
1901 Port
X
2308 Burgundy
X
9293 Caldera Rose
X
9463 Brushed Pewter
X
X
200
3256-2199 Black
200
3256-2728 Almond
200
3256-2791 Folkstone
200
3256-0045 Paintable
200
Unit # 3009007
PVC EDGEBANDING
Metallic
1474 Design White
Shelving
& Hardware
1005 Black
3256-1105 White
Adhesives
& Caulk
For use on furniture, cabinetry and store fixtures. Features resin-impregnated cellulose paper construction with lacquer topcoat. Fade and heat resistant; can be used
with directly applied hotmelt or PVA adhesives in softforming applications. 7/8”
width.
Pre-Glued. For heat bar or hot air applications.
Roll
Color Code
Lgth. Ft.
Without Adhesive
Decorative
Hardware
Semi-Flexible – Thick
Unit # 3009008
PVC EDGEBANDING
Edgebanding
& Veneers
Sinks
MELAMINE EDGEBANDING
X
* Medium gloss finish.
Screws &
Fasteners
PVC & Melamine Edgebanding
Unit # 3009003
Storage &
Convenience
PVC EDGEBANDING
Patterns – Medium/Thick
For use with metals, metallic laminates and imitation metallics.
.024” Thick x 500’ L
Color Code
7/8” W
X
9393 Caldera Rose
X
X
9463 Brushed Pewter
X
X
X
3mm Thick
x 300’ L
X
X
Cabinet Locks
& Latches
2mm Thick
x 250’ L
Abrasives
1mm Thick
x 400’ L
Color Code
we carry are listed
in this catalog.
please contact
your local branch
for assistance.
29
& Machines
For use on residential and office furniture, casegoods, fixtures, cabinetry, and other
applications requiring durability, impact resistance and absence of sharp edges.
Features color throughout thickness, and UV-cured topcoat to resist abrasion. Measures 15/16” wide. Low gloss.
Lighting
Wood
Products
1807 Brushed Aluminum
Peel & Stick Edgebanding
Unit # CAT08_PG4_sm
Peel & Stick Edgebanding
30
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Self-Adhesive Cover Caps
31
Surfacing
Products
& Machines
Unit # CAT08_pg5_sm
nit # CAT08_pg6_sm
U
32
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
33
Surfacing
Products
& Machines
Unit # CAT08_pg7_sm
Fastcap & Fastedge Ordering Information
Unit # CAT08_pg8_sm
34
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
35
& Machines
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Surfacing
Products
Unit # CAT08_PG3_sm
Hardwood Veneer Sheets
No.
PIWVKN4APL
Species
Desc.
White pine
Knotty, plank-matched
RDOCG4A
Red oak
F/C
RDOQFA4A
Red oak
Quartered, assorted flake
RDOQFH4A
Red oak
Quartered, heavy flake
RDOR4A
Red oak
Rift cut
RDO4AL
Red oak
F/C, premium, natural
ROS4AL
South American rosewood
–
Sapeli
Quartered
TEAQ4A
Teak
Quartered
TEA4A
Teak
F/C
TIB4A
Royal mahogany (Tiba)
–
Walnut
F/C
WAL4A
Walnut
F/C, premium
WENQ4AL
Wenge
Quartered
WHOCG4A
White oak
F/C
WHOQFA4AL
White oak
WHOQFH4AL
White oak
WHOR4A
White oak
Rift cut
WHO4A
White oak
F/C, premium
Unit # 3608004
HARDWOOD VENEER SHEETS
Paper Back
SAPQ4AL
WALCG4A
Features 10-mil paper backing to provide stability and reduce splitting and grain
raise. Flexible; can wrap 1” radius. Pre-sanded. Measures 4 ft. x 8 ft. Thickness
.020” ±.005”.
No.
Species
Desc.
XBEMHE4A
Birdseye maple
Heavy eye
ZEBQ4AL
Zebrawood
Quartered
PIYCL4A
Yellow pine
–
MAP4A
White maple
F/C
RDO4A
Red oak
F/C, premium
RDO7A*
Red oak
F/C
ALDVCL4AL
Alder
Clear
ALDVKN4APL
Alder
Rustic
ANIQHF4AL
Anegre
Quartered, heavy figure
ANIQMF4AL
Anegre
Quartered, medium figure
ANIQNF4AL
Anegre
Quartered, plain
Ash
Quartered
* Measures 4 ft. x 10 ft.
ASHQ4AL
ASH4A
Ash
White, F/C
BAMQH4AL
Bamboo
Horizontal, natural
BEMSHE4AL
Birdseye maple
Heavy eye
BEMSME4AL
Birdseye maple
Medium eye
BESQ4AL
European beech
Quartered, steamed
BES4AL
European beech
F/C, steamed
BIRS4A
Red birch
Rotary spliced
BIWS4A
White birch
Rotary spliced
Bubinga
Quartered, plain
BUBQNF4AL
BUTV4AL
Unit # 3608003
2-Ply
Butternut
Various cuts
CEDV4APL
Aromatic red cedar
Plank
CHECG4A
Cherry
–
CHEQ4A
Cherry
Quartered, premium
CHE4A
Cherry
F/C, premium
CHE4AL
Cherry
EUCQHF4AL
FIRQVG4A
HIC4A
JAT4AL
LACQAP4AL
LYPQ4AL
Features perpendicular face-to-back construction with acrylic membrane to protect
against bubbling and glue seepage. Bendable; can conform to moderate horizontal
or vertical curves. Pre-sanded. Measures 4 ft. x 8 ft.
No.
Species
Desc.
Eucalyptus
Quartered, figured
ALDVCL4TL
Fir
Quartered, vertical grain
ANIQMF4TL
Hickory (Calico)
F/C
ASH4T
Ash
White, F/C
Jatoba (Brazilian cherry)
–
BES4TL
European beech
F/C, steamed
Lacewood
Quartered
BIRS4T
Red birch
Rotary spliced
Quartered
BIWS4T
White birch
Rotary spliced
Bubinga
Quartered, plain
Plank
Lyptus
BUBQNF4TL
Alder
Clear
Anegre
MAACG4A
Mahogany
F/C
MAAQRS4AL
Mahogany
Quartered, African, ribbed
CEDV4TPL
Aromatic red cedar
CHECG4T
Cherry
–
MAAQRS4ALPSA
Mahogany
Quartered, African, ribbed,
PSA9505
CHEQ4T
Cherry
Quartered, premium
MAA4A
Mahogany
F/C, African, premium
CHE4T
Cherry
F/C, premium
Maple
–
Fir
MAPQ4A
White maple
Quartered, premium
Hickory (Calico)
F/C
MAPS4A
White maple
Select, rotary cut
LYPQ4TL
Lyptus
Quartered
MAP4AL
White maple
F/C, premium
MAACG4T
Mahogany
F/C
MPPS4CL
Mappa burl
–
MAAQRS4TL
Mahogany
Okume (Gaboon)
Rotary cut
MAA4T
Mahogany
White pine
F/C
Maple
–
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
MAPCG4A
OKUW1G4A
PIWCL4A
36
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
FIRQVG4T
HIC4T
MAPCG4T
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Okume (Gaboon)
Rotary cut
OKUW1G4T
PIWVKN4TPL
White pine
RDOCG4T
Red oak
F/C
RDOR4T
Red oak
Rift cut
RDO4T
Red oak
F/C, premium
Sapeli
Quartered
Teak
Quartered
SAPQ4TL
TEAQ4T
TEA4T
CHE4JL
EUCQHF4JL
JAT4JL
Quartered, figured
Fir
Hickory (Calico)
F/C
FIRQVG4J
HIC4J
Cherry
Eucalyptus
–
Lacewood
Quartered
LYPQ4JL
Lyptus
Quartered
MAACG4J
Mahogany
F/C
MAAQRS4JL
Mahogany
Mahogany
LACQAP4JL
Teak
F/C
MAA4J
WALCG4T
Walnut
F/C
MAPCG4J
Maple
–
WAL4T
Walnut
F/C, premium
MAPCH4
Maple
Heavy, curly
WENQ4TL
Wenge
Quartered
MAPQ4J
White maple
Quartered, premium
WHOCG4T
White oak
F/C
MAPS4J
White maple
Select, rotary cut
WHOR4T
White oak
Rift cut
MAP4J
White maple
F/C
WHO4T
White oak
F/C, premium
MAP4JL
White maple
F/C, premium
ZEBQ4TL
Zebrawood
Quartered
Okume (Gaboon)
Rotary cut
OKUW1G4J
PIWCL4J
White pine
F/C
PIWVKN4JPL
White pine
Unit # 3608002
Red oak
F/C
RDOQFA4J
Red oak
RDOQFH4J
Red oak
RDOR4J
Red oak
Rift cut
RDO4J
Red oak
F/C, premium
RDO4JL
Red oak
ROS4JL
South American rosewood
–
Sapeli
Quartered
TEAQ4J
Teak
Quartered
TEA4J
Teak
F/C
TIB4J
–
Walnut
F/C
WAL4J
Walnut
F/C, premium
WENQ4JL
Wenge
Quartered
WHOCG4J
White oak
F/C
WHOQFA4JL
White oak
Features thermo-set joined face with parallel grain. 3-ply construction. Resists moisture, bubbling, solvent seepage and telegraphing. Tenderized for added flexibility. 2”
to 4” bending radius. Pre-sanded. Measures 4 ft. x 8 ft.
No.
Species
Desc.
WHOQFH4JL
White oak
WHOR4J
White oak
Rift cut
WHO4J
White oak
F/C, premium
ALDVCL4JL
Alder
Clear
XBEMHE4J
Birdseye maple
Heavy eye
ALDVKN4JPL
Alder
Rustic
ZEBQ4JL
Zebrawood
Quartered
ANIQHF4JL
Anegre
ANIQMF4JL
Anegre
ANIQNF4JL
Anegre
Quartered, plain
Ash
Quartered
WALCG4J
ASH4J
Ash
White, F/C
BAMQH4JL
Bamboo
Horizontal, natural
BEMSHE4JL
Birdseye maple
Heavy eye
BEMSME4JL
Birdseye maple
Medium eye
BESQ4JL
European beech
Quartered, steamed
BES4JL
European beech
F/C, steamed
BIRS4J
Red birch
Rotary spliced
BIWS4J
Unit # 3608001
Duraback™
Flexible, water-resistant backing accepts solventand water-based glues and can be post-formed
around curves. 4” to 6” bending radius. Resists
shrinkage, bubbling, blistering, tearing and telegraphing. Pre-sanded. Measures 4 ft. x 8 ft.
Abrasives
ASHQ4JL
Wood
Products
SAPQ4JL
Lighting
No Black Line™ (NBL)
Screws &
Fasteners
RDOCG4J
Surfacing
Products
Edgebanding
& Veneers
F/C
F/C, premium
Adhesives
& Caulk
Select, rotary cut
White maple
Desc.
Cherry
Decorative
Hardware
White maple
MAP4T
Species
MAPS4T
No.
CHE4J
Shelving
& Hardware
Quartered, premium
Storage &
Convenience
Desc.
White maple
Cabinet Locks
& Latches
No.
White birch
Rotary spliced
BUBNF4JL
Bubinga
Quartered, plain
Species
Desc.
BUTV4JL
Butternut
Various cuts
ANIQHF4DL
Anegre
CEDV4JPL
Aromatic red cedar
Plank
ANIQNF4DL
Anegre
Quartered, plain
CHECG4J
Cherry
–
CHEQ4J
Cherry
Quartered, premium
No.
ASH4D
BAMQH4DL
Ash
White, F/C
Bamboo
Horizontal, natural
37
& Machines
Species
MAPQ4T
Sinks
No.
Species
Desc.
Birdseye maple
Heavy eye
BEMSME4DL
Birdseye maple
Medium eye
BESQ4DL
European beech
Quartered
White birch
Rotary spliced
Butternut
Various cuts
CEDV4DPL
Aromatic red cedar
Plank
CHECG4D
Cherry
–
CHEQ4D
Cherry
Quartered, premium
CHE4D
Cherry
F/C, premium
Fir
BEMSHE4DL
BIWS4D
BUTV4DL
FIRQVG4D
HIC4D
JAT4DL
LACQAP4DL
LYPQ4DL
Hickory (Calico)
F/C
–
Lacewood
Quartered
No.
Lyptus
Quartered
Mahogany
Maple
–
MAPQ4D
White maple
Quartered, premium
MAPS4D
White maple
Select, rotary cut
MAP4D
White maple
F/C
MAP4DL
White maple
F/C, premium
MAA4D
MAPCG4D
OKUW1G4D
Okume (Gaboon)
Rotary cut
PIWCL4D
White pine
F/C
PIWVKN4DPL
White pine
RDOCG4D
Red oak
F/C
RDOQFA4D
Red oak
RDOQFH4D
Red oak
RDOR4D
Red oak
Rift cut
RDO4D
Red oak
F/C, premium
TEAQ4D
Teak
Quartered
TEA4D
Teak
F/C
TIB4D
–
Walnut
F/C, premium
WAL4D
WHOCG4D
White oak
F/C
WHOR4D
White oak
Rift cut
WHO4D
White oak
F/C, premium
ZEBQ4DL
Zebrawood
Quartered
MYBS4DL
Myrtle burl
–
Desc.
Automatic
ALD7/8AUTO
Alder
ANI7/8AUTO
Anigre
ASH7/8AUTO
Ash
CHE7/8AUTO
Cherry
CYP7/8AUTO
Cypress
HIC7/8AUTO
Hickory
MAH7/8AUTO
Mahogany
MAP7/8AUTO
Maple
NBIR7/8AUTO
Natural birch
OKO7/8AUTO
Okoume
POP7/8AUTO
Poplar
RBIR7/8AUTO
Red birch
ROAK7/8AUTO
Red oak
SAP7/8AUTO
Sapele
SBEE7/8AUTO
Steamed beech
TEA7/8AUTO
Teak
VFIR7/8AUTO
VG fir
WAL7/8AUTO
Walnut
WBIR7/8AUTO
White birch
WOAK7/8AUTO
White oak
WPIN7/8AUTO
White pine
YPIN7/8AUTO
Yellow pine
MAP7/8PREF
Maple, prefinished
WBIR7/8PREF
White birch, prefinished
WOAKQ7/8AUTO
White oak, quartered
ROAK7/8AUTO3
Red oak, 3mm thick
MAP7/8AUTO3
Maple, 3mm thick
WBIR7/8AUTO3
White birch, 3mm thick
Pre-Glued
ALD7/8PG
Alder
ANI7/8PG
Anigre
ASH7/8PG
Ash
CHE7/8PG
Cherry
CYP7/8PG
Cypress
HIC7/8PG
Hickory
MAH7/8PG
Mahogany
MAP7/8PG
Maple
NBIR7/8PG
Natural birch
OKO7/8PG
Okoume
Unit # 4032001
POP7/8PG
Poplar
RBIR7/8PG
Red birch
EDGEBANDING
ROAK7/8PG
Red oak
Wood Veneer – Fleece-Backed
SAP7/8PG
Sapele
SBEE7/8PG
Steamed beech
TEA7/8PG
Teak
VFIR7/8PG
VG fir
WAL7/8PG
Walnut
WBIR7/8PG
White birch
WOAK7/8PG
White oak
WPIN7/8PG
White pine
YPIN7/8BG
Yellow pine
WOAKRIFT7/8PG
7/8” width.
Automatic. Features saturated fleece membrane laminated to veneer strip. For use
with automatic edgebanding machines in softform, precision sanding and flexing
applications. 500-ft. roll.
Pre-Glued. Thicker, economy-grade veneer for straight-line and simple contour or
radius applications. Features preapplied acrylic thermoset adhesive. 250-ft. roll.
38
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
White oak, rift cut
All species and types available
in multiple widths.
Contact your ISC customer service representative for more
information.
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3495013
Unit # 3495016
CONTACT ADHESIVES
CONTACT ADHESIVES
Spray Grade – WA 800/801
Sinks
Adhesives & Caulk
Surfacing
Products
Contact Adhesives
Unit # 3495011
CONTACT ADHESIVES
5
1 Gal.
WA800 55GAL
55
WATERBSD 5GAL
5 Gal.
WATERBSD 55GAL
55 Gal.
Green
Clear
WA801 5GAL
5
WA801 55GAL
55
Clear
WA951 5GAL
5
WA951 55GAL
55
Unit # 3495028
WAOGH20 5GAL
5 Gal.
WAOGH20 55GAL
Contact Adhesives
55 Gal.
CONTACT ADHESIVES
WA 1700/1701
Unit # 3495027
CONTACT ADHESIVES
Spray Grade – WA 810
No.
Blend of polychloprene rubber, phenolic resins and solvents provides high strength and aggressive tack for
postforming applications. Viscosity 160 CPS. Red
color.
Warning: Extremely flammable.
Size
Gal.
No.
WA810 5GAL
5
Size
Gal.
WA500 GAL
1
WA500 5GAL
5
WA500 55GAL
55
Brush/Roller Grade – WA 600
5
WA1700 55GAL
55
WA1700 330GAL
330
CONTACT ADHESIVES
WA1701 5GAL
5
WA1701 55GAL
55
WA1701 330GAL
330
Blend of polychloroprene rubbers, phenolic resins and
solvents provides strong bond in self-edge or postforming applications. Fast drying. Excellent green strength.
Viscosity 80 CPS. For professional use only.
Size
No.
Gal.
Red
Unit # 3495008
Red
WA1700 5GAL
Natural
Unit # 3495015
CONTACT ADHESIVES
Size
Gal.
No.
WA860 5GAL
5
WA860 55GAL
55
Unit # 3495029
CONTACT ADHESIVES
WA 700A – Aerosol
Clear
solvents. High solids formula for consumer use in flatwork applications. Can be applied with brush or roller.
Viscosity 1200 CPS. Natural color.
Caution: Flammable.
No.
Size
WA861 5GAL
5
WA861 55GAL
55
WA600 QT
1 Qt.
Blend of synthetic rubbers, hydrocarbon resins and
solvents for bonding plastic laminate, paper and other
non-porous materials to wood, particleboard, metal or
glass. Near-white color.
Size
No.
Oz.
WA600 GAL
1 Gal.
WA700A 14OZ
14.2
WA600 5GAL
5 Gal.
WA700A 16OZ
16.6
Expect more from us.
Call ISC Surfaces First!
Decorative
Hardware
Wood
Products
Blend of polychloroprene
rubbers, phenolic resins
and solvents. Fast drying,
high solids formula. Viscosity 600 CPS. Brown.
Warning: Extremely flammable. For professional
use only.
Lighting
CONTACT ADHESIVES
Brush/Roller Grade – WA 500
Blend of synthetic rubbers and organic solvents provides high strength bond in flatwork applications. Low
VOC formula. Can be applied by brush, roller or spray.
Viscosity 760 CPS. GreenGuard® certified.
Caution: Flammable.
Cabinet Locks
& Latches
Unit # 3495007
WA800 5GAL
55
Shelving
& Hardware
WATERBSD GAL
1 Qt.
5
WA950 55GAL
Screws &
Fasteners
WATERBSD QT
WA950 5GAL
Storage &
Convenience
Size
White
39
Abrasives
No.
& Machines
Polychloroprene adhesive for postforming operations.
Less than 20 g/L VOC. For brush, roller or spray applications. Nonflammable.
solvents provides strong bonds in high-speed postforming or flatwork applications. Fast drying. Viscosity
90 CPS.
Size
No.
Gal.
Red
solvents provides strong bond in flatwork applications.
Viscosity 150 CPS.
Size
No.
Gal.
Red
Adhesives
& Caulk
Edgebanding
& Veneers
Waterborne – WA H20
Contact, Melamine & PVA Adhesives & Solvents
Unit # 3495033
Unit # 3495009
CONTACT ADHESIVES
Spray Grade – Canisterized – WA 700/701
PVA ADHESIVES
For application of WA 700 & 701 spray-grade contact
adhesives.
No.
Desc.
WA 10
AA23L-45885SS
Blend of synthetic rubbers and non-chlorinated
organic solvents for use in
non-laminating or postforming
applications.
Resists temperatures over
200° F. Covers 20 to 25
sq. ft./lb.
Size
Lbs.
No.
Unit # 3495012
SPRAY EQUIPMENT
Spray gun w/ 65° fan tip
HOSE6FT
6-Ft. hose
HOSE12FT
12-Ft. hose
HOSE18FT
18-Ft. hose
HOSE24FT
24-Ft. hose
TEE FITTING
T-Fitting
6501TIP
65° Fan tip
9501TIP
95° Fan tip
For wood on wood applications and panel manufacturing operations requiring faster machining times. Fast
setting, nontoxic and nonflammable. Dries clear.
Unit # 3495034
ADHESIVE SOLVENTS
No.
WA 110
Red
WA700 9LB
9
WA700 30LB
30
WA700 140LB
140
WA700 300LB
Size
WA10 PINT
1 Pt.
WA10 GAL
1 Gal.
WA10 5GAL
5 Gal.
WA10 55GAL
55 Gal.
300
Unit # 3495004
Clear
WA701 9LB
9
WA701 30LB
30
WA701 140LB
140
WA701 300LB
300
Contact, Melamine & PVA Adhesives & Solvents
Unit # 3495031
CONTACT ADHESIVES
Blend of synthetic rubbers and non-chlorinated organic solvents
provides high strength
bonds. Low VOC formula. Covers 20 to 27
sq. ft./lb. GreenGuard®
certified.
Warning:
Extremely
flammable.
PVA ADHESIVES
Yellow – WA 20
For dissolving and removing dried adhesive film, and
for cleaning of equipment.
Size
No.
Gal.
WA110 5GAL
5
WA110 55GAL
55
Unit # 3495003
ADHESIVE CLEANERS
For assembly and cold press applications. Nontoxic,
nonflammable and fast-setting wood adhesive. Resistant to heat and solvents.
No.
Size
WA 121
Size
Lbs.
No.
Red
WA20 PINT
1 Pt.
WA20 GAL
1 Gal.
WA20 5GAL
5 Gal.
WA20 55GAL
55 Gal., fiber drum
WA20S 55GAL
55 Gal., steel drum
WA730 27LB
27
WA730 128LB
128
PVA ADHESIVES
WA730 270LB
270
WA 30
Unit # 3495026
WA731 27LB
27
WA731 128LB
128
For removing overspray and adhesive residue on fabricated parts and decorative materials.
Size
No.
Gal.
270
WA121 GAL
Natural
WA731 270LB
Unit # 3495030
CONTACT ADHESIVES
1
WA121 5GAL
5
WA121 55GAL
55
Blend of synthetic rubbers
and non-chlorinated organic
solvents
provides
high
strength bonds in flatwork
applications. 30-lb. canister.
Covers 20 to 25 sq. ft./lb.
For manufacturing drawer boxes and cabinets. Acrylic
based formula for use on nonpourous materials including melamine, high pressure laminate, PVC, wood
veneer, vinyl, metal, stone and tile. Dries quickly to
clear finish. Water resistant.
No.
Size
No.
Color
WA740 30LB
Red
OW13 PINT
1 Pt.
Natural
OW13 GAL
1 Gal.
OW13 5GAL
5 Gal.
WA741 30LB
40
Unit # 3495018
MELAMINE ADHESIVES
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Water and polyvinyl acetate emulsion for joint assembly applications. Can be applied to clean, dry surfaces
using brush, roller or squeeze bottle. Viscosity 5000
CPS. Yellow color. GreenGuard® certified.
No.
Size
Gal.
WA30 5GAL
5
WA30 55GAL
55
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3495014
Unit # 3495021
Unit # 3495025
PVA ADHESIVES
PVA ADHESIVES
PVA ADHESIVES
WA Type II
WA 3100
WA 3301
WA3100 55GAL
55
WA3100 275GAL
275
Emulsion of water, starch and polyvinyl acetate for bonding decorative laminates to wood. Glue
spreader/cold press application.
Viscosity 6000 CPS. White color.
GreenGuard® certified.
Vinyl acetate adhesive with
high solids for fast setting.
High heat resistance. For glue
spreader or spray applications
in postforming and flat work.
Unit # 2320001
No.
Size
Gal.
WA3105 55GAL
55
WA 3001
WA3131 5GAL
5
WA3131 55GAL
55
For use on natural stone, metal, porcelain, plastic,
glass, ceramic, wood or masonry in interior or exterior
applications. 100% silicone formula provides flexible,
water-resistant seal. Open time 10 minutes at 72°F.
Final cure in 1 day (14 days in swimming pool applications). 10.5 oz.
No.
Color
WA3131 330GAL
330
70-5718-6711
Clear
70-5726-6711
Bright white
70-5727-6711
Standard white
No.
Size
Gal.
Unit # 3495024
PVA ADHESIVES
WA 3132
70-5728-6711
Ivory
70-5729-6711
Cornsilk
70-5730-6711
Pearl
70-5731-6711
Birch
PVA ADHESIVES
70-5732-6711
Antique white
WA 3028
70-5733-6711
Parchment
Emulsion of water and polyvinyl acetate for edge applications in high-speed postforming. Can be applied by
glue spreader, spray or hot press. Viscosity 2850 CPS.
White color. GreenGuard® certified.
Size
No.
Gal.
WA3028 5GAL
5
70-5734-6711
Almond
70-5735-6711
Sandstone beige
70-5736-6711
Light smoke
Unit # 3495032
Unit # 3495020
PVA ADHESIVES
WA 3029
Emulsion of water and polyvinyl acetate for edge applications in high-speed postforming. Can be applied by
glue spreader, spray or hot press. Viscosity 1420 CPS.
Blue color. GreenGuard® certified.
Size
No.
Gal.
WA3029 5GAL
5
70-5737-6711
Light buff
70-5738-6711
Light chocolate
70-5739-6711
Summer wheat
High-solids emulsion of water, starch and polyvinyl
acetate for bonding decorative laminates to wood. Hot
press, cold press or paint roller application; suitable for
hot continuous panel laminating. Viscosity 9250 CPS.
White color. GreenGuard® certified.
Size
No.
Gal.
70-5740-6711
Coffee
70-5741-6711
Standard gray
WA3132 330GAL
330
70-5742-6711
Silverado
70-5743-6711
Light pewter
70-5744-6711
Charcoal gray
70-5745-6711
Raven
41
Surfacing
Products
Screws &
Fasteners
High solids emulsion of water,
starch and polyvinyl acetate for
bonding decorative laminates to
wood. Hot press, cold press or
paint roller application; suitable for
hot continuous panel laminating.
Viscosity 4850 CPS. White color.
AccuColor 100™
Storage &
Convenience
SILICONE SEALANTS
WA 3131
Unit # 3495019
Shelving
& Hardware
Unit # 3495023
PVA ADHESIVES
PVA ADHESIVES
Emulsion of water and polyvinyl acetate for bonding decorative laminates to wood;
suitable for postforming applications. Can be applied by
glue spreader, spray, pinch
roller or hot press. Viscosity
2850 CPS. Green color.
Size
No.
Gal.
WA3001 5GAL
5
WA3001 55GAL
55
55
Wood
Products
WA3000 330GA
5
WA3301 55GAL
Lighting
Size
Gal.
5
55, fiber drum
55, steel drum
275
330
WA3301 5GAL
Cabinet Locks
& Latches
Postforming – WA 3000
Water and polyvinyl acetate emulsion for bonding
smooth non-porous materials such as melamine, ABS
plastic sheeting and glass to wood. Glue spreader/cold
press application. Viscosity 2750 CPS. White color.
Size
No.
Gal.
WA 3105
Abrasives
PVA ADHESIVES
Decorative
Hardware
Unit # 3495022
PVA ADHESIVES
Unit # 3495005
No.
WA3000 5GAL
WA3000F55GAL
WA3000 55GAL
WA3000 275GAL
Edgebanding
& Veneers
5 Gal.
55 Gal.
& Machines
WATYPEII 5GAL
WATYPEII 55GAL
PVA Adhesives & Silicone Sealants
Emulsion of water, starch and polyvinyl acetate for
bonding decorative laminates to wood. Glue spreader/
cold press application. Viscosity 5750 CPS. White
color. GreenGuard® certified.
Size
No.
Gal.
Adhesives
& Caulk
For assembly and cold press applications. Water resistant. Meets D3
requirements of European test
method EN204 for interior applications.
Meets ANSI/HPVA water
resistance requirements.
No.
Size
WATYPEII PINT
1 Pt.
WATYPEII GAL
1 Gal.
Sinks
PVA Adhesives & Silicone Sealants
SeamFil Kits
Unit # 3495001
SeamFil Kits
Contact your ISC Surfaces representative for complete information.
Quality Products
Quality People
42
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Caulks
Contact your ISC Surfaces representative for complete information.
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Unit # 3495002
43
& Machines
Surfacing
Products
Caulks
Cleaners, Caulks, Sealing Caps, Lubricants & Adhesives
PROTECTALL
Unit # 4027001
AEROSOL CLEANERS
Shine Plus
Unit # 4033001
SEALING CAPS
Multi-Purpose
For cleaning, polishing, waxing, treating and protecting surfaces such as metals,
plastics, formica, fiberglass, porcelain and woods. Leaves shiny finish without residue. Nonabrasive.
Size
No.
Oz.
61015
13.5
Cleaners, Caulks, Sealing Caps, Lubricants & Adhesives
Unit # 3465001
For capping tubes of glue, caulk, paint or sealant for later re-use. Can also be used
as Romex wire termination, pen cap or air tool inlet. Red.
Pkg.
No.
Qty.
LRC50REDCAP
50
Unit # 3474001
ADHESIVE CAULK
AEROSOL LUBRICANTS
Tub & Tile – Polyseamseal®
Standard
For use on tubs, sinks, showers, countertops, vanities, backsplashes, surrounds,
plumbing fixtures and ceramic tile. Cleans up with water. 10 oz. tube.
No.
Color
M705042
Clear
M710042
White
Spray-on application. Suitable for laminated plastics and table saw tops. Helps prevent burns and minor surface scratches from self-guiding cutters.
Size
Case
No.
Oz.
Qty.
LAMILUBE
10.5
12
Unit # 3611026
SEAM ADHESIVES
needs!
For installation of undermount sinks. Two-part acrylic formula bonds to laminates
and solid surfaces. 250mL tube. Includes two mixing tips.
No.
Color
44
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
70001K
White
70003K
Bisque
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Colorant Kits & Adhesives
45
Surfacing
Products
Colorant Kits & Adhesives
& Machines
Unit # CAT09_PG9_sm
Wood Fillers
Unit # CAT08_pg38_sm
Wood Fillers
46
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Wood Glue
47
Surfacing
Products
Wood Glue
& Machines
Adhesives, Lubricants, Solvents & Wood Fillers
Unit # 3039003
Unit # 3039002
WOOD FILLERS
WOOD FILLERS
HOT MELT ADHESIVES
Solvent-Based
Water-Based
High performance ethylene vinyl acetate formulated for use with edging
materials and banding
machines. Resists hot
and cold temperatures.
Series 2001. Medium/
high viscosity. For use
with straight edgebanders and computer-controlled machines.
Series 2020. For manual contour edgebanders. Long
open time, low viscosity.
Series 2031. For straight edgebanding and softforming. Medium viscosity.
Series 2041. For straight edgebanding. Medium viscosity, high heat resistance.
Series 2022. For use with HolzHer edgebanders.
Medium viscosity and heat resistance.
Suitable for professional and home use, indoors or outdoors. Can be stained, drilled, nailed and sanded. No
significant cracking or shrinking. Spreads smooth.
No.
Color
1/4 Pint
Suitable for professional and home use, indoors or outdoors. Can be stained, drilled, nailed and sanded. No
significant cracking or shrinking. Spreads smooth.
Cleans up with water and does not emit solvent fumes.
Unit # 3009015
No.
Viscosity
CPS @ 392°F
Color
Case
Qty.
Pellets
ECL-36041100
ECL-36041102
Ash
ECL-36041106
Birch
95,000
Translucent
45 Lb.
ECL-36041110
Cherry
2020N
20,000
Natural
50 Lb.
ECL-36041122
Mahogany
ECL-36041124
Maple
2031BR
60,000
Natural
60,000
Brown
50 Lb.
50 Lb.
ECL-36041126
Color
1/4 Pint
2001T
2031N
No.
Alder
Natural
ECL-40042106
Birch
ECL-40042112
Cherry / Dark Mahogany
ECL-40042118
Fir / Maple
ECL-40042126
Natural
ECL-40042128
Oak
ECL-40042134
Red Oak
Walnut
2031W
60,000
White
50 Lb.
ECL-36041128
Oak
2031BL
60,000
Black
50 Lb.
ECL-36041130
Pine
ECL-40042142
2041N
60,000
Natural
50 Lb.
ECL-36041134
Red Oak
ECL-40042144
White
ECL-36041142
Walnut
ECL-40042148
White Pine
ECL-40042152
Cartridges
2022BL
60,000
Black
45
ECL-36041144
White
2022BR
60,000
Brown
45
ECL-36041148
White PIne
2022N
60,000
Natural
45
2022W
60,000
White
45
ECL-36021100
2024
38,000
Translucent
45
Adhesives, Lubricants, Solvents & Wood Fillers
Unit # 3897006
LUBRICANTS
Trim-Ease
Prevents burning and marking of plastic laminates by
router bit pilot guides. Paraffin, wax and petroleum formula with corrosion inhibitors.
Dim. In.
No.
L x Dia.
TM2
4 x 1/2
Pint
Golden Oak
Pint
ECL-40022106
Birch
Alder
ECL-40022112
Cherry / Dark Mahogany
ECL-36021102
Ash
ECL-40022118
Fir / Maple
ECL-36021106
Birch
ECL-40022126
Natural
ECL-36021110
Cherry
ECL-36021122
Mahogany
ECL-36021124
Maple
ECL-36021126
Natural
ECL-40022128
Oak
ECL-40022134
Red Oak
ECL-40022142
Walnut
ECL-40022144
White
ECL-36021128
Oak
ECL-36021130
Piner
ECL-40022148
White Pine
ECL-36021134
Red Oak
ECL-40022152
Golden Oak
ECL-36021142
Walnut
ECL-36021144
White
ECL-36021148
White Pine
Gallon
ECL-36001100
Alder
ECL-36001102
Ash
ECL-36001124
Maple
Unit # 3039001
SOLVENTS
ECL-36001134
Red Oak
ECL-36001148
White Pine
For cleanup and smoothing of solvent-based wood fillers.
48
No.
Size
ECL-730001
Gallon
ECL-730011
Quart
ECL-730021
Pint
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Need help with
specifications?
Our knowledgeable staff
will be happy to
assist you!
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Decorative Hardware
Surfacing
Products
Showcase Hardware Collections
Unit # SCH-10
Unit # SCH-11
SHOWCASE HARDWARE COLLECTIONS
Board SCH-10
Board SCH-11
Black Nickel/White Knob
P1141-NB
Black Nickel Wire Pull – 3" CC
Black Nickel pull 3" CC
P353-PB
Polished Brass Wire Pull – 3" CC
P2891-NBWT4
Black Nickel/White Pull – 3" CC
P354-SC
Satin Chrome Wire Pull – 3-1/2" CC
P2001-NBWT4
Black Nickel/White Pull – 3" CC
P354-PB
Polished Brass Wire Pull – 3-1/2" CC
Black Nickel Pull 3" CC
P355-SC
Satin Chrome Wire Pull – 4" CC
P355-PB
Polished Brass Wire Pull – 4" CC
K1071-NBWT4
P2053-NB
P2711-NB
Satin Chrome Wire Pull – 3" CC
Phone or FAX
your order today!!
Lighting
P353-SC
Cabinet Locks
& Latches
Desc.
Burnished Satin Nickel Knob – 32 mm dia.
Abrasives
K2361-NB
Note: Items listed left to right, top to bottom.
No.
Desc.
49
& Machines
No.
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Unit # SCH-12
Unit # SCH-13
Board SCH-12
Board SCH-13
No.
P2341-AB
P2381-AB
No.
Desc.
Antique Brass Pull – 3" CC
K2361-BN
P2053-DBN
P2891-DBNWT4
Desc.
Burnished Satin Nickel Knob – 1-1/4" Dia.
Burnished Satin Nickel Pull – 3" CC
Burnished Satin Nickel w/White Ceramic Ctr Pull – 3" CC
P2891-AEBO4
Antique Brass Pull w/Almond Ceramic Ctr. – 3" CC
P2891-AEWT4
Antique Brass Pull w/White Ceramic Ctr. – 3" CC
P2561-BN
P2371-BN
P2315-DBN
P2251-AB
50
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Unit # SCH-14
Unit # SCH-16
Board SCH-14
Board SCH-16
No.
Desc.
Black Iron Knob – 1-1/2” Dia.
P2769-BSN
Satin Silver Cup Pull – 3" CC
K2223-BI
Black Iron Knob – 1-1/4” Dia.
P2023-BSN
Satin Silver Pull – 3" CC
K2279-RI
Rustic Iron Knob – 1-1/2” Dia.
P2562-BSN
K2223-RI
Rustic Iron Knob – 1-1/4” Dia.
P2561-BSN
P2985-RI
Rustic Iron Pull – 3" CC
P2301-BSN
P2985-BI
Black Iron Pull – 3" CC
K2361-BSN
Satin Silver Knob 1-1/4" Dia.
P2873-RI
Rustic Iron Pull – 3" CC
K2876-BSN
P2873-BI
Black Iron Pull – 3" CC
K2045-BSN
department has the
answers you need!
Cabinet Locks
& Latches
K2279-BI
Lighting
Desc.
Abrasives
No.
51
& Machines
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Unit # SCH-17
Unit # SCH-18
Board SCH-17
Board SCH-18
No.
No.
Desc.
Desc.
P2769-BLAE
Black Antique Cup Pull – 3" CC
P2769-AEH
Antique English Cup Pull – 3" CC
P2023-BLAE
Black Antique Pull – 3" CC
P2023-AEH
Antique English Pull – 3" CC
P2562-BLAE
P2562-AEH
P2561-BLAE
P2561-AEH
P2301-BLAE
P2301-AEH
K2361-BLAE
Black Antique Knob – 1-1/4" Dia.
K2361-AEH
Antique English Knob 1-1/4" Dia.
K2876-BLAE
K2876-AEH
K2045-BLAE
K2045-AEH
Quality Products
Quality People
52
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Unit # SCH-19
Unit # SCH-21
Board SCH-19
Board SCH-21
Desc.
Oil Rubbed Bronze Cup Pull – 3" CC
P2769-AC
Antique Copper Cup Pull – 3" CC
P2023-OB
Oil Rubbed Bronze Pull – 3" CC
P2023-AC
Antique Copper Pull – 3" CC
P2562-OB
P2562-AC
P2561-OB
P2561-AC
P2301-OB
P2301-AC
K2361-OB
Oil Rubbed Bronze Knob 1-1/4" Dia.
K2361-AC
Antique Copper Knob 1-1/4" Dia.
K2876-OB
K2876-AC
K2045-OB
K2045-AC
Lighting
P2769-OB
Abrasives
We are continually
adding new products.
Call us with your
inquiries.
Cabinet Locks
& Latches
No.
Desc.
53
& Machines
No.
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Unit # SCH-22
Unit # SCH-23
Board SCH-22
Board SCH-23
No.
No.
Desc.
Desc.
P2203-ORB
Oil Rubbed Bronze Basket Weave Design Cup Pull – 3" CC
P2203-BSN
Satin Silver Basket Weave Design Cup Pull – 3" CC
P2205-ORB
Oil Rubbed Bronze Basket Weave Design Pull – 3" CC
P2205-BSN
Satin Silver Basket Weave Design Pull – 3" CC
K2858-ORB
Oil Rubbed Bronze Basket Weave Design Knob
K2858-BSN
Satin Silver Basket Weave Design Knob
K2859-ORB
Oil Rubbed Bronze Swirl Design Knob
K2859-BSN
Satin Silver Swirl Design Knob
P2206-ORB
Oil Rubbed Bronze Swirl Design Pull – 3" CC
P2206-BSN
Satin Silver Swirl Design Pull – 3" CC
P2204-ORB
Oil Rubbed Bronze Swirl Design Cup Pull – 3" CC
P2204-BSN
Satin Silver Swirl Design Cup Pull – 3" CC
Manufacturer’s datasheets,
catalogs and other detailed
information is available
upon request.
54
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Unit # SCH-24
Unit # SCH-25
Board SCH-24
Board SCH-25
Desc.
P110-SN
Satin Nickel Bar Pull – 10" OL X 12mm Dia. – 7" CC
P112-SN
P108-SN
Satin Nickel Bar Pull – 8" OL X 12MM Dia. – 5" CC
K102-SN
P106-SN
Shelving
& Hardware
Satin Nickel Bar Pull – 152mm OL X 12mm Dia. – 96mm CC
Satin Nickel Bar Knob – 2" OL X 12mm Dia.
Below Items Available But Not Shown
P116-SN
P120-SN
P124-SN
P130-SN
Screws &
Fasteners
P1096-SN
Storage &
Convenience
No.
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
P2205-AC
Antique Copper Basket Weave Design Pull – 3" CC
K2858-AC
Antique Copper Basket Weave Design Knob
K2859-AC
Antique Copper Swirl Design Knob
P2206-AC
Antique Copper Swirl Design Pull – 3" CC
P2204-AC
Antique Copper Swirl Design Cup Pull – 3" CC
Cabinet Locks
& Latches
Antique Copper Basket Weave Design Cup Pull – 3" CC
Lighting
Desc.
P2203-AC
Abrasives
Need help with
specifications?
will be happy to
assist you!
55
& Machines
No.
Wood
Products
Drawer Pulls & Cabinet Hardware Collections
Unit # 3409016
Unit # 4031046
CABINET HARDWARE COLLECTIONS
DRAWER PULLS
Rubbed Bronze I – Board MI0178-MPL-A
Wire
Steel construction.
No.
Finish
3” Center-to-Center
P353-PB
Polished brass
P353-SC
Satin chrome
P353-BK
Black
P353-PC
Polished chrome
P353-10B
Oil-rubbed bronze
3-1/2” Center-to-Center
P354-PB
Polished brass
P354-SC
Satin chrome
P354-BK
Black
P354-PC
Polished chrome
P354-10B
Oil-rubbed bronze
4” Center-to-Center
P355-PB
Polished brass
P355-SC
Satin chrome
P355-BK
Black
P355-PC
Polished chrome
P355-10B
Oil-rubbed bronze
96mm Center-to-Center
No.
Desc.
Finish
61540RB
33mm Knob
Rubbed Bronze
61379RB
3" Pull
Rubbed Bronze
Rubbed Bronze
P396-PB
Polished brass
61822RB
30mm Knob
P396-SC
Satin chrome
61780RB
31mm Knob
Rubbed Bronze
P396-BK
Black
39602RB
3" Ornate Pull
Rubbed Bronze
61603RB
31mm Knob
Rubbed Bronze
61516RB
30mm Knob
Rubbed Bronze
61259RB
4" Pull
Rubbed Bronze
61541RB
33mm Knob
Rubbed Bronze
70215RB
30mm Football Knob
Rubbed Bronze
39612RB
3" Pull
Rubbed Bronze
61786RB
31mm Knob
Rubbed Bronze
61501RB
31mm Knob
Rubbed Bronze
39613RB
3" Cup Pull
Rubbed Bronze
61141RB
3" Pull
Rubbed Bronze
39383RB
33mm Pumpkin Knob
Rubbed Bronze
70129RB
30mm Knob
Rubbed Bronze
61341RB
3" Cup Pull
Rubbed Bronze
61344RB
3" Pull
Rubbed Bronze
61813RB
1-1/4" Knob
Rubbed Bronze
33558RB
1-1/4" Knob
Rubbed Bronze
P396-PC
Polished chrome
P396-10B
Drawer Pulls & Cabinet Hardware Collections
Oil-rubbed bronze
to serve you:
• Kansas City, KS
• Wichita, KS
• Springfield, MO
• Tulsa, OK
56
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Unit # 3409015
Sinks
Iron Craft – Board MI0181-MPL-A
Unit # 3409017
2-1/2" Twisted T-Knob
Tumbled Pewter
65213RI
Rusted Iron
65214WI
96mm Twisted Pull
Wrought Iron
Finish
65214PI
96mm Twisted Pull
Tumbled Pewter
Bronze with Copper Highlights
65214RI
96mm Twisted Pull
Rusted Iron
3-1/2" Twisted Pull
Wrought Iron
Tumbled Pewter
No.
39613VB
Desc.
3" Cup Pull
61141VB
3" Pull
65172WI
61344VB
3" Pull
65172PI
3-1/2" Twisted Pull
65172RI
3-1/2" Twisted Pull
Rusted Iron
1-1/2" Riveted Square Knob
Wrought Iron
Tumbled Pewter
61786VB
31mm Knob
1-1/4" Knob
70129VB
30mm Knob
65177PI
61603VB
31mm Knob
65177RI
Rusted Iron
61813VB
1-1/4" Knob
65173WI
3-1/2" Curved Riveted Pull
Wrought Iron
39383VB
33mm Pumpkin Knob
65173PI
Tumbled Pewter
61379VB
3" Pull
65173RI
Rusted Iron
61259VB
4" Pull
65237WI
1-1/4" Square Knob
Wrought Iron
39602VB
3" Ornate Pull
65176WI
2" Swirl Knob
Wrought Iron
61501VB
31mm Knob
65237PI
1-1/4" Square Knob
Tumbled Pewter
61541VB
33mm Knob
65176PI
2" Swirl Knob
Tumbled Pewter
61540VB
33mm Knob
65237RI
1-1/4" Square Knob
Rusted Iron
61780VB
31mm Knob
65176RI
2" Swirl Knob
Rusted Iron
61822VB
30mm Knob
65175WI
3-1/2" Swirl Pull
Wrought Iron
61516VB
30mm Knob
65175PI
3-1/2" Swirl Pull
Tumbled Pewter
65175RI
3-1/2" Swirl Pull
Rusted Iron
61341VB
3" Cup Pull
61362VB
4" Pull
39612VB
3" Pull
Abrasives
33558VB
65177WI
Screws &
Fasteners
65213PI
Storage &
Convenience
Wrought Iron
Wood
Products
Finish
57
& Machines
No.
Lighting
Desc.
65213WI
Cabinet Locks
& Latches
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Bronze w/ Copper Highlights – Board MI0176-MPL-A
Unit # 3409013
Modern – Board MI0173-MPL-A
Unit # 3409018
Bronze w/ Copper – Bar Pulls – Board MI0177-MPL-A
No.
Desc.
No.
Desc.
Finish
Finish
62731SN
16mm Oval Knob
Satin Nickel
62731DC
16mm Oval Knob
Dull Chrome
62325SN
128mm Pull
Satin Nickel
62325DC
128mm Pull
Dull Chrome
62273SN
128mm Flat Bow Pull
Satin Nickel
62273DC
128mm Flat Bow Pull
Dull Chrome
62313SNAV
128mm Pull
Satin Nickel
62313DC
128mm Pull
Dull Chrome
62312SNAV
128mm Pull
Satin Nickel
2" Bar Knob
62312DC
128mm Pull
Dull Chrome
65156VB
96/156mm Bar Pull
62286SN
128mm Pull
Satin Nickel
65160VB
160/220mm Bar Pull
62286DC
128mm Pull
Dull Chrome
65384VB
384/464mm Bar Pull
62319SN
160mm Pull
Satin Nickel
65448VB
448/528mm Bar Pull
62319DC
160mm Pull
Dull Chrome
65288VB
288/368mm Bar Pull
65224VB
224/304mm Bar Pull
65188VB
128/188mm Bar Pull
65053VB
Our pledge is
customer service.
58
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Unit # 3409010
Sinks
Circles & Scrolls – Board MI0160-MPL-A
Unit # 3409011
96mm Dee Pull
Satin Nickel
P84218-SN-C
288mm Dee Pull
Satin Nickel
P84217-SN-C
128mm Dee Pull
Satin Nickel
PN0305-SN-C
96mm Disk Pull
Satin Nickel
PN0410-SN-C
128mm Disk Pull
Satin Nickel
PN0406-SN-C
96mm Pull
Satin Nickel
PN0405-SN-C
128mm Pull
Satin Nickel
96mm Ring & Dot Pull
Brushed Satin Pewter
PBF532-BSP-C
38mm Rough & Smooth Knob
PBF544-BSP-C
3" Rough & Smooth Pull
PBF304-BSP-C
33mm Totem Knob
PBF305-BSP-C
96mm Totem Pull
PBF528-BSP-C
38mm Domed Rings Knob
PBF512-BSP-C
3" Ringed Pull
PBF524-BSP-C
38mm Ringed Knob
PBF508-BSP-C
3" Domed Ringed Pull
Cabinet Locks
& Latches
Lighting
P84216-SN-C
PBF317-BSP-C
Wood
Products
Finish
Finish
Abrasives
Proudly Serving
Kansas, Missouri
& Oklahoma
59
& Machines
No.
Desc.
35mm Flat Ring & Dot Knob
Screws &
Fasteners
PBF316-BSP-C
Storage &
Convenience
No.
Desc.
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Suburban – Board MI0165-MPL-A
Unit # 3409009
Bronze w/ Copper – Forged Iron – Board MI0145-MPL-A
Unit # 3409014
Builder’s Program – Board MI0172-MPL-A
No.
Desc.
No.
Desc.
PN2001-SN-C
Satin Nickel
PN2001-AL-C
1-1/4" Hollow Knob
Aluminum
PN2001-SC-C
1-1/4" Hollow Knob
Satin Chrome
P11747V-SN-C
1-1/4" Hollow Knob
Satin Nickel
P11747-AL-C
1-1/4" Hollow Knob
Aluminum
P11747-SC-C
1-1/4" Hollow Knob
Satin Chrome
PN2001-PB-C
1-1/4" Hollow Knob
Polished Brass
PN2001-PC-C
1-1/4" Hollow Knob
Polished Chrome
PN2001-OB3-C
1-1/4" Hollow Knob
Dark Oil Rubbed Bronze
P11747V-PB-C
1-1/4" Hollow Knob
Polished Brass
P11747V-PC-C
1-1/4" Hollow Knob
Polished Chrome
P11747-OB3-C
1-1/4" Hollow Knob
P604DB-PB-C1
3 1/2" Wire Pull
Polished Brass
P604D6-PC-C1
96mm Wire Pull
Polished Chrome
P604DA-SC-C1
3" Wire Pull
Satin Chrome
P604DC-OB3-C
4" Wire Pull
P604D7-SN-C1
128mm Wire Pull
Satin Nickel
P0256B-AL-C
P0270A-SN-C1
P01025-SS-C
96mm Bow Pull
Aluminum
96mm Tapered Bow Pull
Satin Nickel
40mm Steel Bar Knob
Stainless Steel
P0256A-SN-C1
128mm Bow Pull
Satin Nickel
P84612-OB3-C
P01012-SS-C
96/135mm Steel Bar Pull
Stainless Steel
P01026-SS-C
Stainless Steel
P01013-SS-C
Stainless Steel
P01014-SS-C
Stainless Steel
P01016-SS-C
Stainless Steel
P01018-SS-C
Stainless Steel
60
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
96mm Birdcage Wire Pull
PN9011-VBR-C
35mm Small Wire Swirl Knob
with Flat Top
PN0527-VBR-C
96mm Birdcage Bail Pull
PN0528-VBR-C
50mm Small Oval Birdcage
Knob
P0527A-VBR-C
P0528A-VBR-C
64mm Large Oval Birdcage
Knob
PN1790-VBR-C
192mm Ball End Birdcage
Pull
PN1780-VBR-C
124mm Ball End Birdcage
Knob
Finish
1-1/4" Hollow Knob
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Finish
PN0534-VBR-C
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
needs!
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Unit # 3409007
Sinks
Carlton – Board MI0094-MPL-A
Unit # 3409008
No.
Desc.
Finish
Finish
P0256B-BNP-A
96mm Bow Pull
Brushed Nickel Plate
P0256A-FB-A
128mm Bow Pull
Flat Black
P0256C-MC-C
160mm Bow Pull
Matte Chrome
P0256D-FB-C
224mm Bow Pull
Flat Black
PN0256-BNP-A
288mm Bow Pull
PN0256-MC-A
288mm Bow Pull
Matte Chrome
P0256D-BNP-C
224mm Bow Pull
50mm Small Oval Birdcage Knob
Flat Black
P0256C-FB-C
160mm Bow Pull
Flat Black
P0528A-FB-C
64mm Large Oval Birdcage Knob
Flat Black
P0256A-BNP-A
128mm Bow Pull
PN0575-FB-C
Flat Black
P0256B-MC-A
96mm Bow Pull
Matte Chrome
PN0575-AP-C
Pewter
P0528A-AP-C
64mm Large Oval Birdcage Knob
Pewter
PN0528-AP-C
50mm Small Oval Birdcage Knob
Pewter
PN9010-AP-C
40mm Large Wire Swirl Knob With Flat Top
Pewter
PN9013-AP-C
34mm Small Wire Swirl Knob With Ball Top
Pewter
PN0534-FB-C
Flat Black
PN0534-AP-C
Pewter
PN0549-FB-C
Flat Black
PN0549-AP-C
Pewter
PN0527-FB-C
Flat Black
Pewter
P0527A-FB-C
Flat Black
P0527A-AP-C
Pewter
we carry are listed
in this catalog.
please contact
your local branch
for assistance.
61
& Machines
Abrasives
PN0527-AP-C
Storage &
Convenience
Flat Black
Wood
Products
Flat Black
40mm Large Wire Swirl Knob With Ball Top
Lighting
35mm Small Wire Swirl Knob With Flat Top
PN9012-FB-C
Cabinet Locks
& Latches
PN9011-FB-C
Screws &
Fasteners
PN0528-FB-C
Shelving
& Hardware
No.
Desc.
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Forged Iron II – Board MI0158-MPL-A
Unit # 3409005
Southwestern – Board MI0005-MPL-A
Unit # 3409006
Bauhaus – Board MI0048-MPL-A
No.
Desc.
No.
Desc.
63120NA
P02140-SS-C
40mm Ring & Dot Oval Knob
Copper Kettle
PBF220-OB3-C
40mm Ring & Dot Oval Knob
PBF316-CK-C
Copper Kettle
Stainless Steel
PBF316-OB3-C
Finish
22mm Thumb Knob
Finish
PBF220-CK-C
40mm Bar Knob with Stop
Stainless Steel
PBF221-OB3-C
96mm Ring & Dot Oval Pull
63118NA
18mm Thumb Knob
Stainless Steel
PBF454-315-C
35mm Ceramic Insert Knob
Turquoise
P02101-SS-C
160/220mm Bar Pull
Stainless Steel
PBF317-OB3-C
P02104-SS-C
384/464mm Bar Pull
Stainless Steel
PBF221-CK-C
96mm Ring & Dot Oval Pull
Copper Kettle
P02105-SS-C
448/528mm Bar Pull
Stainless Steel
PBF317-CK-C
Copper Kettle
P02103-SS-C
288/368mm Bar Pull
Stainless Steel
PBF455-315-C
3" Ceramic Insert Pull
Turquoise
P02102-SS-C
224/304mm Bar Pull
Stainless Steel
PBF304-FB-C
33mm Totem Knob
Flat Black
P02164-SS-C
64/115mm Bar Pull
Stainless Steel
P06472-CK-C
25.5mm Square Modern
Southwestern Knob
Copper Kettle
P07471-CK-C
25mm Round Modern
Southwestern Knob
Copper Kettle
PBF305-FB-C
96mm Totem Pull
Flat Black
PBF132-184-C
35mm Ceramic Insert Quadrant
Knob
Terracotta & Turquoise Mix
P06471-CK-C
96mm Modern Southwestern
Curved Pull
Copper Kettle
P49298-HOB-C
34.5mm Cross Etched Knob
Hammered Old Brass
P06472-ASL-C
25.5mm Square Modern
Southwestern Knob
Antique Silver
P06471-ASL-C
96mm Modern Southwestern
Curved Pull
Antique Silver
Quality Products
Quality People
62
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
PBF455-471-C
3" Ceramic Insert Pull
Terracotta
P49296-HOB-C
96mm Cross Etched Pull
Hammered Old Brass
P07471-ASL-C
25mm Round Modern
Southwestern Knob
Antique Silver
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Unit # 3409003
Sinks
Fusilli II – Board MI0154-MPL-A
Unit # 3409004
30mm Medium Football Knob
Satin Nickel
PN0393-SN-C
35mm Large Football Knob
Satin Nickel
36mm Round Knob
Satin Nickel
PN0394-OB-C
26mm Small Football Knob
Distressed Oil Rubbed Bronze
PN0836-PB-C
36mm Round Knob
Polished Brass
PN0395-OB-C
30mm Medium Football Knob
PN0836-PC-C
36mm Round Knob
Polished Chrome
PN0393-OB-C
35mm Large Football Knob
PN1053-BSN-C
64mm Cup Pull
Satin Nickel
P83506-SN-C
96mm Fusilli Pull
Satin Nickel
PN1053-PB-C
64mm Cup Pull
Polished Brass
P83506-OB-C
96mm Fusilli Pull
PN1053-PC-C
64mm Cup Pull
Polished Chrome
P83508-SN-C
128mm Fusilli Pull
Satin Nickel
PN0836-AC-C
36mm Round Knob
Copper Kettle
P83508-OB-C
128mm Fusilli Pull
PN0836-AI-C
36mm Round Knob
Antique Iron
PN0415-SN-C
96mm Wavy Pull
Satin Nickel
PN0836-OB3-C
36mm Round Knob
PN0415-OB-C
96mm Wavy Pull
PN1053-AC-C
64mm Cup Pull
Copper Kettle
PN0414-SN-C
128mm Wavy Pull
Satin Nickel
PN1053-AI-C
64mm Cup Pull
Antique Iron
PN0414-OB-C
128mm Wavy Pull
PN1053-OB3-C
64mm Cup Pull
PN0403-SN-C
96mm Angular Pull
Satin Nickel
PN0403-OB-C
96mm Angular Pull
PN0404-SN-C
128mm Angular Pull
Satin Nickel
PN0404-OB-C
128mm Angular Pull
Cabinet Locks
& Latches
PN0836-BSN-C
Abrasives
MANUFACTURERS’
CATALOGS
We shall be glad to send
manufacturers’ catalogs and
other available publications
and data on request.
Screws &
Fasteners
PN0395-SN-C
Finish
Storage &
Convenience
Satin Nickel
Wood
Products
Finish
26mm Small Football Knob
63
& Machines
No.
No.
Desc.
Desc.
PN0394-SN-C
Lighting
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Cup Pulls II – Board MI0141-MPL-XX
Unit # 3409001
Sophisticates II – Board MI0152-MPL-A
Unit # 3409002
Contempo II – Board MI0157-MPL-A
No.
No.
Desc.
Finish
P84728-SN-C
64mm Delicate Pull
Satin Nickel
Desc.
Finish
P84728-OB-C
64mm Delicate Pull
PN0417-RAL-C
96mm Basket Weave Pull
Red Antique Low Sheen
P84729-SN-C
96mm Delicate Pull
Satin Nickel
PN0407-RAL-C
35mm Concentric Knob
P84729-OB-C
96mm Delicate Pull
P84350-RAL-C
96mm Ribbed Bow Pull
PN0303-SN-C
96mm Smiley Pull
Satin Nickel
PN0416-RAL-C
30mm Basket Weave Knob
PN0303-OB-C
96mm Smiley Pull
PN0416-SN-C
Satin Nickel
PN0276-SN-C
128mm Smiley Pull
Satin Nickel
PN0416-OB-C
PN0276-OB-C
128mm Smiley Pull
PN0523-OB-C
30mm Astrodome Knob
P0270B-SN-C
Satin Nickel
PN0523-SN-C
30mm Astrodome Knob
Satin Nickel
P0270A-SN-C
Satin Nickel
PN0523-RAL-C
30mm Astrodome Knob
P84612-SN-C
Satin Nickel
PN0417-OB-C
96mm Basket Weave Pull
P0270B-OB-C
PN0407-OB-C
P0270A-OB-C
P84350-OB-C
96mm Ribbed Bow Pull
P84612-OB-C
PN0293-RAL-C
30mm Rope Edge Knob
Red Antique
PN0491-SN-C
128mm Blueprint Pull
Satin Nickel
PN0293-SN-C
30mm Rope Edge Knob
Satin Nickel
PN0491-OB-C
PN0293-OB-C
30mm Rope Edge Knob
P84009-OB-C
96mm Diminishing Pull
P84302-OB-C
30mm Knuckle Knob
P84615-SN-C
Satin Nickel
P84302-SN-C
30mm Knuckle Knob
Satin Nickel
P84009-SN-C
96mm Diminishing Pull
Satin Nickel
P84302-RAL-C
30mm Knuckle Knob
Red Antique
P84615-OB-C
PN0402-RAL-C
96mm Rope Edge Pull
Red Antique
PN1492-OB-C
PN0407-SN-C
Satin Nickel
PN1492-SN-C
Satin Nickel
P84300-RAL-C
96mm Knuckle Pull
Red Antique
P0280A-SN-C
128mm Rope Edge Pull
Satin Nickel
P84301-OB-C
128mm Knuckle Pull
P0281A-OB-C
P0281A-RAL-C
Red Antique
64
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Finger & Drawer Pulls
Unit # 1729203
DRAWER PULLS
Sinks
Flush
Unit # 1729205
FINGER PULLS
Two-piece screw-together design. For glass 3/16” to 5/16”
thick. 1-1/16” OD rim. For hole diameter 13/16”. 50 per carton.
Brass construction. Beveled edges. Measures 1-3/4” H x 3-1/4” W x 9/16” D. 12 per
carton.
No.
Finish
KNA-819XANO
Finger & Drawer Pulls
Unit # 1729204
Anochrome
KNA-819XPB
DRAWER PULLS
Polished brass
Decorative
Hardware
Finish
Anochrome
Extruded Aluminum
Unit # 1729202
PULLS
Steel with anochrome finish. 100 per package.
Carton
Qty.
KNA-822ALUM
3-7/8
12
96
1
Bore Dim. In.
LxWxD
KNA-813ANO
2-7/8 x 13/16
2-1/2 x 51/64 x 25/64
Storage &
Convenience
Wood
Products
Abrasives
Cabinet Locks
& Latches
Lighting
we carry are listed
in this catalog.
please contact
your local branch
for assistance.
65
& Machines
KNA-822-3
OA Dim. In.
LxW
Screws &
Fasteners
No.
Lgth.
In.
No.
Shelving
& Hardware
For recessed mounting in 3/4” drawers.
Note: Special lengths to 96” available on request; no screw holes.
No.
KNA-836ANO
Adhesives
& Caulk
Edgebanding
& Veneers
Threaded
NOTES
66
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Drawer Slides & Mounting Brackets
Unit # 1729126
Unit # 1729255
DRAWER SLIDES
Light-Duty – 60-Lb. Class
Medium-Duty
3/4 extension. Steel construction. Side mount design
with ball bearing nylon rollers. Positive stop lever prevents accidental drawer removal. Lift-out disconnect.
Drawer Slides. Packed 10 sets per box with instructions.
Combination Drawer Slides. Packed 10 sets per box
with screws, instructions and rear brackets. Zinc
plated.
Zinc-plated steel construction. Side mounted. Ball
bearing nylon rollers. Positive stop lever prevents accidental drawer removal. Lift-out disconnect. 3” high.
Clearance 1/2” plus 1/32” minus 0 each side. Includes
screws and instructions. 75 lb. class.
Sinks
DRAWER SLIDES
Door & Drawer Slide Systems
Unit # 1729003
Lgth.
In.
Polybagged
Desc.
Polybagged
Lgth.
In.
KNA-1260BBRN14
14
KNA-1260BBRN16
16
KNA-1300PZC12
Zinc
12
KNA-1260BBRN22
22
KNA-1300PZC14
Zinc
14
KNA-1300PZC16
Zinc
16
Zinc-Plated
KNA-1175PZC18
18
KNA-1175PZC20
20
KNA-1260B14
14
KNA-1300PZC18
Zinc
18
22-5/8
KNA-1260B16
16
KNA-1300PZC20
Zinc
20
24
KNA-1260B18
18
KNA-1300PZC22
Zinc
22
KNA-1260B20
20
KNA-1300PZC24
Zinc
24
KNA-1260B22
22
KNA-1305PZC24
Zinc
24
KNA-1300PZC26
Zinc
26
KNA-1300PZC28
Zinc
Bulk Pack
28
Bulk Pack
22-5/8
Accessories
KNA-1175P82
Drawer Slides & Mounting Brackets
Combination Drawer Slides
Desc.
No.
Dim.
In.
KNA-1260BSW181975
18 x 19-3/4
Roller rear
KNA-1260BSW1820
18 x 20
KNA-1260BSW2022
20 x 22
KNA-1260BSW202275
20 x 22-3/4
Accessories
White
KNA-1300BZC16
Zinc
16
KNA-1300BWH16
White
16
KNA-1300BZC18
Zinc
18
KNA-1300BZC20
Zinc
20
Almond
20
KNA-1300BALM20
Desc.
Pkg.
Qty.
KNA-1284-3
Rear plastic socket
1
KNA-1284-80
#6 x 7/16” Phillips/flathead
screw
100
No.
KNA-1300BWH14
KNA-1300BZC22
14
Zinc
22
KNA-1300BALM22
Almond
22
KNA-1300BWH22
White
22
KNA-1300BZC24
Zinc
24
KNA-1300BZC26
Zinc
26
Adhesives
& Caulk
Unit # 1729002
MOUNTING BRACKETS
Rear – Plastic
Lighting
No.
Cabinet Locks
& Latches
KNA-1175BZC22-5/8
Manufacturer’s datasheets, catalogs and
other detailed
upon request.
For use with 1260, 1284 and 1300 series drawer
slides. Cabinet member must be 1/8” shorter than cabinet depth; drawer member must be at least 3/4”
shorter than cabinet member length.
No.
Qty.
KNA-1123PLAS
100
67
Abrasives
KNA-1175PZC24
& Machines
KNA-1175PZC22-5/8
Lgth.
In.
No.
Shelving
& Hardware
Brown
Drawer Slides
No.
Drawer Slides
Screws &
Fasteners
No.
Storage &
Convenience
Drawer Slides
Packaging Options:
Polybagged (P): 1 set per bag with instructions; 10
sets per carton.
Bulk Pack (B): 10 sets per carton with instructions.
Wood
Products
3/4 extension. For under drawer mounting using staples or screws. Features high-density polyethylene rollers. 1” height. 1/8” clearance each side. Zinc finish.
Includes screws and instructions.
Polybagged. 1 set per bag; 10 sets per carton.
Bulk Pack. 50 sets per carton.
Decorative
Hardware
Light-Duty – 50-Lb. Class
Edgebanding
& Veneers
DRAWER SLIDES
Drawer Runners
Unit # 3468011
DRAWER RUNNERS
Single Extension
Bottom mounted, with synthetic rollers on steel axles. Self-closing. Captive right hand profile; tolerance left hand profile. Side clearance 1/2”. Features double warning lift-out stop.
Epoxy coated cream or white.
Note: 2mm setback required for overlay drawer fronts.
Drawer Runners
Specifications
No.
Nom.
Lgth. In.
JUL-230E8000PBCR
JUL-230E7500PBCR
JUL-230E7000PBCR
JUL-230E7000PBWH
JUL-230M6500PBCR
JUL-230M6500PBWH
JUL-230M6000PBCR
JUL-230M6000PBWH
JUL-230M5500PBCR
JUL-230M5500PBWH
JUL-230M5000PBCR
JUL-230M5000PBWH
JUL-230M4500PBCR
JUL-230M4500PBWH
JUL-230M4000PBCR
JUL-230M4000PBWH
JUL-230M3500PBCR
JUL-230M3500PBWH
JUL-230M3000PBCR
JUL-230M3000PBWH
JUL-230M2500PBCR
JUL-230M2500PBWH
32
30
28
28
26
26
24
24
22
22
20
20
18
18
16
16
14
14
12
12
10
10
JUL-230M6500C
JUL-230M6500W
JUL-230M6000MPCR
JUL-230M6000MPWH
JUL-230M5500MPCR
JUL-230M5500MPWH
JUL-230M5000MPCR
JUL-230M5000MPWH
JUL-230M4500MPCR
JUL-230M4500MPWH
JUL-230M4000MPCR
JUL-230M4000MPWH
JUL-230M3500MPCR
JUL-230M3500MPWH
JUL-230M3000MPCR
JUL-230M3000MPWH
26
26
24
24
22
22
20
20
18
18
16
16
14
14
12
12
Countertop Overhang, In.
5/8
1-1/4
1-7/8
Min. Reveal, In.
1/32
3/32
1/8
Runners
Frame Cabinet*
Max. Inside
Min. Inside
Depth In.
Depth In.
Polybagged
33-9/16
31-3/4
31-9/16
29-3/4
29-9/16
27-3/4
29-9/16
27-3/4
28-1/8
26-11/16
28-1/8
26-11/16
26-1/8
24-11/16
26-1/8
24-11/16
24-3/16
22-3/4
24-3/16
22-3/4
22-3/16
20-3/4
22-3/16
20-3/4
20-1/4
18-13/16
20-1/4
18-13/16
18-1/4
16-13/16
18-1/4
16-13/16
16-1/4
14-13/16
16-1/4
14-13/16
14-5/16
12-7/8
14-5/16
12-7/8
12-5/16
10-7/8
12-5/16
10-7/8
Bulk – 25 pair/box
28-1/8
26-11/16
28-1/8
26-11/16
26-1/8
24-11/16
26-1/8
24-11/16
24-3/16
22-3/4
24-3/16
22-3/4
22-3/16
20-3/4
22-3/16
20-3/4
20-1/4
18-13/16
20-1/4
18-13/16
18-1/4
16-13/16
18-1/4
16-13/16
16-1/4
14-13/16
16-1/4
14-13/16
14-5/16
12-7/8
14-5/16
12-7/8
Panel Cabinet*
Min. Inside
Depth In.
Extension
Loss In.†
Cabinet &
Drawer Profile
Lgth. In.
Color
31-5/8
29-5/8
27-11/16
27-11/16
25-3/4
25-3/4
23-3/4
23-3/4
21-13/16
21-13/16
19-13/16
19-13/16
17-7/8
17-7/8
15-7/8
15-7/8
13-7/8
13-7/8
11-15/16
11-15/16
9-15/16
9-15/16
6
5-23-32
5-5/16
5-5/16
4-15/16
4-15/16
4-11/16
4-11/16
4-5/16
4-5/16
4
4
3-3/4
3-3/4
3-3/8
3-3/8
3-3/8
3-3/8
3-3/8
3-3/8
2-5/16
2-5/16
31-1/2
29-1/2
27-9/16
27-9/16
25-5/8
25-5/8
23-5/8
23-5/8
21-11/16
21-11/16
19-11/16
19-11/16
17-3/4
17-3/4
15-3/4
15-3/4
13-3/4
13-3/4
11-13/16
11-13/16
9-13/16
9-13/16
Cream
Cream
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
25-3/4
25-3/4
23-3/4
23-3/4
21-13/16
21-13/16
19-13/16
19-13/16
17-7/8
17-7/8
15-7/8
15-7/8
13-7/8
13-7/8
11-15/16
11-15/16
4-15/16
4-15/16
4-11/16
4-11/16
4-5/16
4-5/16
4
4
3-3/4
3-3/4
3-3/8
3-3/8
3-3/8
3-3/8
3-3/8
3-3/8
25-5/8
25-5/8
23-5/8
23-5/8
21-11/16
21-11/16
19-11/16
19-11/16
17-3/4
17-3/4
15-3/4
15-3/4
13-3/4
13-3/4
11-13/16
11-13/16
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
Cream
White
* Measurements for overlay drawer fronts; inset drawers vary depending on front thickness.
† At recommended drawer length.
68
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
White
Left
White
20
DRAWER RUNNER SOCKETS
KNA-1805-96ALM550
Right
Almond
22
DRAWER SLIDE BRACKETS
Rear Mount
KNA-1805-97ALM550
Left
Almond
22
Euro-Style
KNA-1805-96WH550
Right
White
22
KNA-1805-97WH550
Left
White
22
KNA-1805-96ALM600
Right
Right
JUL-602301L
Left
12
Almond
12
KNA-1805-98WH300
Right
White
12
KNA-1805-99WH300
Left
White
12
KNA-1805-98ALM350
Right
Almond
14
KNA-1805-99ALM350
Left
Almond
14
KNA-1805-98WH350
Right
White
14
Desc.
Lgth.
In.
KNA-1805-101WP
Rear mount socket
2-3/8
KNA-1805-401LBP
Left only
4
KNA-1805-401RBP
Right only
4
No.
Unit # 4030001
KNA-1805-99WH350
Left
White
14
KNA-1805-98ALM400
Right
Almond
16
KNA-1805-99ALM400
Left
Almond
16
KNA-1805-98WH400
Right
White
16
DRAWER SLIDES
KNA-1805-99WH400
Left
White
16
Self-Closing – ES Series
KNA-1805-98ALM450
Right
Almond
18
KNA-1805-99ALM450
Left
Almond
18
DRAWER SLIDES
KNA-1805-98WH450
Right
White
18
Self-Close – Euro
KNA-1805-99WH450
Left
White
18
KNA-1805-98ALM500
Right
Almond
20
KNA-1805-99ALM500
Left
Almond
20
KNA-1805-98WH500
Right
White
20
KNA-1805-99WH500
Left
White
20
KNA-1805-98ALM550
Right
Almond
22
KNA-1805-99ALM550
Left
Almond
22
KNA-1805-98WH550
Right
White
22
Drawer Runner Sockets, Drawer Slides & Brackets
Finish
Lgth.
In.
Right
Almond
12
KNA-1805-97ALM300
Left
Almond
12
KNA-1805-96WH300
Right
White
12
No.
Desc.
Drawer Member
KNA-1805-96ALM300
Shelving
& Hardware
Unit # 1729137
Roller bearing design for kitchen cabinets, home office
and RTA furniture applications. Cabinet member side
mounts, drawer member fastens to either side or bottom of drawer. Features adaptable face frame or 32mm
mounting, positive double out-stop, positive in-stop, liftout disconnect, positive lock-open, and 4-way adjustment slots. 35.5mm H. Clearance: Side 1/2” plus 1/32”,
minus 0” tolerance, Top 1”. 100 lb. class. 100 sets per
member per carton.
Taped sets. Include one drawer member and one cabinet member.
KNA-1805-99WH550
Left
White
22
Epoxy coated steel construction. Features 32mm hole
pattern, self-close/stay-closed action, and double
warning stop with lockout position. 3/4 extension with
flange. 1/2” side clearance. White.
Lgth.
No.
Desc.
In.
Cabinet Members
KNA-1805-98ALM600
Right
Almond
24
ES0212-W8-CL
Left
12
KNA-1805-99ALM600
Left
Almond
Taped Sets – 20 Per Pack
24
ES0212-W8-CR
Right
12
ES0214-W8-CL
Left
14
KNA-1805TALM300
—
12
ES0214-W8-CR
Right
14
KNA-1805TWH300
—
White
12
ES0216-W8-CL
Left
16
KNA-1805TALM350
—
Almond
14
ES0216-W8-CR
Right
16
KNA-1805TWH350
—
White
14
ES0218-W82-CL
Left
18
KNA-1805TALM400
—
Almond
16
ES0218-W82-CR
Right
18
KNA-1805TWH400
—
White
16
ES0220-W8-CL
Left
20
KNA-1805TALM450
—
Almond
18
ES0220-W8-CR
Right
20
KNA-1805TWH450
—
White
18
ES0222-W8-CL
KNA-1805TALM500
—
Almond
20
ES0222-W8-CR
KNA-1805TWH500
—
White
20
KNA-1805TALM550
—
Almond
22
ES0212-W8-DL
Left
12
Right
12
Almond
KNA-1805-97WH300
Left
White
12
KNA-1805-96ALM350
Right
Almond
14
KNA-1805-97ALM350
Left
Almond
14
KNA-1805-96WH350
Right
White
14
KNA-1805-97WH350
Left
White
14
KNA-1805-96ALM400
Right
Almond
16
KNA-1805-97ALM400
Left
Almond
16
KNA-1805-96WH400
Right
White
16
ES0216-W8-DL
Left
16
KNA-1805-97WH400
Left
White
16
ES0216-W8-DR
Right
16
KNA-1805-96ALM450
Right
Almond
18
ES0218-W82-DL
Left
18
KNA-1805-97ALM450
Left
Almond
18
ES0218-W82-DR
Right
18
KNA-1805-96WH450
Right
White
18
KNA-1805-97WH450
Left
White
18
KNA-1805-96ALM500
Right
Almond
20
ES0222-W8-DL
Left
22
KNA-1805-97ALM500
Left
Almond
20
ES0222-W8-DR
Right
22
Left
Right
Drawer Members
22
22
KNA-1805TWH550
—
White
22
ES0212-W8-DR
KNA-1805TALM600
—
Almond
24
ES0214-W8-DL
Left
14
24
ES0214-W8-DR
Right
14
KNA-1805TWH600
—
White
Edgebanding
& Veneers
Almond
Left
Adhesives
& Caulk
Right
KNA-1805-99ALM300
Decorative
Hardware
JUL-602300R
KNA-1805-98ALM300
Left and right
24
For use with No. 1805
Euro-Style drawer slides.
4” Length. White. 50 per
pkg.
When ordering: add part
number suffix to indicate
left-handed (L) or righthanded (R).
ES0220-W8-DL
Left
20
ES0220-W8-DR
Right
20
69
Screws &
Fasteners
JUL-601962VH
24
Unit # 1729346
Storage &
Convenience
For frame cabinet applications. Synthetic construction.
Requires #6 x 1/2” truss head screws for mounting (not
included).
No.
Desc.
Almond
KNA-1805-97ALM600
Left
Almond
Cabinet Member
Sinks
Right
KNA-1805-97WH500
Wood
Products
20
KNA-1805-96WH500
Unit # 3468231
Lighting
Lgth.
In.
Cabinet Locks
& Latches
Finish
Abrasives
Desc.
& Machines
No.
Surfacing
Products
Drawer Runner Sockets, Drawer Slides & Brackets
Sockets, Drawer Runners & Slides
No.
Nom.
Lgth. In.
Min. Inside
Depth In.
Drawer
Lgth. In.
Color
JUL-430E6000VCR
24
23-3/4
23-5/8
Cream
JUL-430E600VWH
24
23-3/4
23-5/8
White
JUL-430E5500VCR
22
21-13/16
21-11/16
Cream
JUL-430E5500VWH
22
21-13/16
21-11/16
White
JUL-430E5000VCR
20
19-13/16
19-11/16
Cream
JUL-430E5000VWH
20
19-13/16
19-11/16
White
JUL-430E4500VCR
18
17-7/8
17-3/4
Cream
JUL-430E4500VWH
18
17-7/8
17-3/4
White
JUL-430E4000VCR
16
15-7/8
15-3/4
Cream
JUL-430E4000VWH
16
15-7/8
15-3/4
White
JUL-430E3500VCR
14
13-7/8
13-3/4
Cream
JUL-430E3500VWH
14
13-7/8
13-3/4
White
JUL-430E3000VCR
12
11-15/16
11-13/16
Cream
JUL-430E3000VWH
12
11-15/16
11-13/16
White
JUL-430E2500VCR
10
9-15/16
9-13/16
Cream
JUL-430E2500VWH
10
9-15/16
9-13/16
White
Unit # 4030013
SOCKETS
Rear Mount
Unit # 1729375
Allows attachment of runners to back of face frame cabinets. Polyethylene construction with elongated slots for vertical and horizontal adjustment. Can be attached with
staples or pan head screws.
No.
Desc.
ES03FS
Sockets, Drawer Runners & Slides
Rear mount socket
PENCIL DRAWER SLIDES
Light-Duty
Unit # 3468012
3/4 extension. Mounts to underside of desk or table top. Drawer members are side
mounted. Features attached drawer release clips with non-handed quick disconnect
drawer members, attached surface mounting brackets, hold-in feature, and positive
in/out stops. 2-9/16” overall drop height. Clearance: 9/16” + 1/32” minus 0” per side.
75 lb. class.
Polybagged. Includes 10 sets with screws and instructions.
Quantity Pack. Includes 20 left-hand cabinet members, 20 right-hand cabinet members, and 40 drawer members.
DRAWER RUNNERS
Full Extension
Lgth.
In.
No.
Polybagged
KNA-8200P14
14
KNA-8200P16
16
KNA-8200P18
18
KNA-8200P20
20
KNA-8200P22
22
Quantity Pack
KNA-8200Q22
22
Unit # 1729092
DRAWER SLIDES
Light-Duty – 35 Lb. Class
Bottom mounted, with synthetic rollers on steel axles. Double captive profiles. Side
clearance 1/2”. Overextension 1-3/16” at recommended drawer length. Features
detents in drawer and intermediate profile to hold drawer open; lock-out stops prevent drawer removal. 10 per pkg.
Note: 4mm setback required for overlay drawer fronts.
No.
Nom.
Lgth. In.
Min. Inside
Depth In.
Drawer
Lgth. In.
Color
JUL-430E8000VCR
32
31-5/8
31-1/2
Cream
JUL-430E8000VWH
32
31-5/8
31-1/2
White
JUL-430E7500VCR
30
29-5/8
29-1/2
Cream
JUL-430E7500VWH
30
29-5/8
29-1/2
White
JUL-430E7000VCR
28
27-11/16
27-9/16
Cream
JUL-430E7000VWH
28
27-11/16
27-9/16
White
JUL-430E6500VCR
26
25-3/4
25-5/8
Cream
JUL-430E6500VWH
26
25-3/4
25-5/8
White
70
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Center mount under drawer. 1/4” height.
Ball bearing movement. Friction disconnect. Rear socket and multiple hole pattern
for fitting multiple drawer sizes. Zinc-plated
steel construction. Polybagged with socket,
tack glides, screws and instructions. 10
bags per case.
No.
Lgth.
In.
KNA-1129PZC16
16
KNA-1129PZC18
18
KNA-1129PZC20
20
KNA-1129PZC22
22
KNA-1129PZC24
24
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Drawer & Pantry Slides
Unit # 1729372
Unit # 1729264
DRAWER SLIDES
BOX DRAWER SLIDES
Sinks
Over-Travel
Unit # 1729371
Lgth.
In.
KNA-8300P12
12
KNA-8300P14
14
KNA-8300P16
16
KNA-8300P18
18
KNA-8300P20
20
KNA-8300P22
22
PANTRY SLIDES
KNA-8300P24
24
Bottom Mount
KNA-8300P26
26
KNA-8300P28
28
KNA-8300P30
30
KNA-6505B24
24
Unit # 1729279
Drawer Slides
Lgth.
In.
Unit # 1729374
KNA-4100P8
8
DRAWER SLIDES
KNA-4100P10
10
Full Extension – Tru-Trac™ 100
KNA-4100P12
12
KNA-4100P14
14
KNA-4100P16
16
KNA-4100P18
18
KNA-4100P20
20
KNA-4100P22
22
Lgth.
In.
KNA-8000P12
12
KNA-8000P14
14
KNA-8000P16
16
Desc.
KNA-8000P18
18
KNA-4101B
Rear
KNA-8000P20
20
KNA-4104B
Drawer & Pantry Slides
Front
KNA-8000P22
22
KNA-8000P24
24
KNA-8000P26
26
KNA-8000P28
28
No.
Unit # 1729278
Screws &
Fasteners
For kitchen pantries, entertainment centers and other
pull-out applications. Features telescoping action with
.83” overtravel. 1.54” height. Bracket mount; 2.25”
clearance. 130-lb. load rating. Anochrome finish.
No.
Brackets
Shelving
& Hardware
No.
Non-handed, ball bearing, side-mount design for use in
frame or frameless applications. Features positive stop
bumper, lever disconnect for easy drawer removal, and
face frame mounting hole. Fits traditional or 32mm hole
patterns. 1-15/32” height; 1/2” side clearance. 100-lb.
load rating. Zinc finish. Packed 10 per carton without
screws.
DRAWER SLIDES
Drawer Slides
Full Extension – Stainless Steel
to serve you:
Constructed of 304 stainless steel for use in wet or corrosive environments. Side mounting. Includes stainless
mounting screws. 1-49/64” H. Clearance: .51, +.030
-.000 each side. 75-lb. load rating. USDA H-1
approved. Polybagged with screws; 10 sets per carton.
Lgth.
No.
In.
KNA-6400PSS16
16
KNA-6400PSS18
18
• Kansas City, KS
• Wichita, KS
• Springfield, MO
• Tulsa, OK
No.
Lgth.
In.
KNA-TT100B150
10
KNA-TT100B300
12
KNA-TT100B350
14
KNA-TT100B400
16
KNA-TT100B450
18
KNA-TT100B500
20
KNA-TT100B550
22
KNA-TT100B600
24
KNA-TT100B650
26
Accessories
No.
KNA-TT401
Desc.
Rear mounting bracket
71
Storage &
Convenience
22
Wood
Products
KNA-6505B22
Lighting
18
Cabinet Locks
& Latches
KNA-6505B18
Adhesives
& Caulk
No.
Decorative
Hardware
Unit # 1729264
Abrasives
Zinc construction. Low-profile design for box drawer or
pedestal file drawers up to 24” wide. Side-mount for
frame and frameless construction. Features full extension on steel ball bearings, push button lever release,
and hold-in detent. 1-27/64” H. Clearance: 1/2” plus
1/32” minus 0” each side. 80 lb. class.
Nos. KNA-4101B and KNA-4104B. Non-handed
snap-on design, 2 per bag.
Light-duty. 75 lb. load rating. 3/4 extension slide for use
in frame or frameless cabinets. Features 32mm hole
pattern, factory-attached release clips with quick-disconnect drawer members, hold-in mechanism, steel
ball bearings and cushioned stops. Clearance each
side: 1/2” +1/32 -0. Polybagged.
& Machines
For use in desk drawers, credenzas and store fixtures.
Rolled steel construction. Features quick disconnect
rail, side-mount for frame or frameless construction,
32mm hole pattern, closed position hold-in detent, and
telescoping 1” over-travel on precision steel ball bearings. Zinc plated. Meets or exceeds ANSI standards.
Bulk packed, 5 pairs per box; screws not included.
Lgth.
No.
In.
Medium-Duty
Edgebanding
& Veneers
DRAWER SLIDES
Drawer Slides, Mounting Brackets & Sockets
Unit # 1729267
Unit # 1729271
BOX & FILE DRAWER SLIDES
Medium duty. For use
with box drawers or
pedestal file drawers
up to 24” wide. Side
mounting.
Features
telescoping action with
steel ball bearings and metal retainer, 32mm hole pattern, lever disconnects and cushioned stops. Drawer
can be adjusted without removal. 1-3/16” height. 1/2”
clearance each side, +1/32” -0”. 100-lb. load rating.
Anochrome finish.
8400BRV Series. Heavy duty for RV Stay Close.
Polybagged. 1 set with screws and instructions. 10
sets per carton.
Bulk Pack. 10 sets per carton without screws.
No.
Desc.
Unit # 1729268
MOUNTING BRACKETS
DRAWER SLIDES
Full extension. Medium-duty; for use with roll-out trays
and desk drawers. Bottom- or side-mounting in frame
or frameless applications. Features telescoping action
with steel ball bearings, shelf tabs for drawer mounting,
32mm hole pattern, lever disconnect and cushioned
stops. Drawer can be adjusted without removal. 100lb. load rating. Available in sizes 10” to 28” in 2” increments. 1-13/16” H. Clearance each side: 1/2, +1/32 -0.
Anochrome finish.
8402
Lgth.
In.
8403
Polybagged
No.
Lgth.
In.
Pack
KNA-8407B20
20
Bulk
KNA-8400P8
Full Extension
8
KNA-8407B22
22
Bulk
KNA-8400P10
Full Extension
10
KNA-8407P22
22
Poly
KNA-8400P12
Full Extension
12
KNA-8400P14
Full Extension
14
KNA-8400P16
Full Extension
16
KNA-8400P18
Full Extension
18
KNA-8400P20
Full Extension
20
KNA-8400P22
Full Extension
22
KNA-8400P24
Full Extension
24
KNA-8400P26
Full Extension
26
KNA-8400P28
Full Extension
28
8404
Nonhanded design.
Rear Mounting Brackets. Feature 2-3/4” max. adjustment.
No. KNA-8404. Fits all KV 8400 series.
No. KNA-8404B. Bulk pack, 100 brackets per carton.
Nos. KNA-8403BBL and 8404BBL. Barrel pack, 400
brackets per carton.
No. KNA-8404BKIT. Kit pack includes 2 rear mounting
and 2 front face frame brackets, screws, and instructions.
No.
Desc.
Finish
Rear Mounting Brackets
Unit # 1729269
DRAWER SLIDES
KNA-8400B8
Full Extension
8
KNA-8400B10
Full Extension
10
KNA-8400BRV10
Full Extension
10
KNA-8400B12
Full Extension
12
Full Extension
12
KNA-8403BBL Snap-on; small base
Front Face Frame Brackets
Zinc
KNA-8400BRV12
KNA-8400B14
Full Extension
14
KNA-8404
Snap-on
Zinc
Full extension. Medium-duty; for use in face frame cabinets. Side-mounting. Features telescoping action with
steel ball bearings and metal retainers, flexible mounting tabs and cushioned stops. Drawer can be adjusted
without removal. 100-lb. load rating. 3” H. 1/2” clearance each side, +1/32” -0”. Includes front and rear
brackets. Anochrome finish. Bulk packed 10 per carton
without screws.
Lgth.
No.
In.
KNA-8400BRV14
Full Extension
14
KNA-8404B
Clip-On
Zinc
KNA-8409B18
18
Zinc
KNA-8409B20
20
22
24
Bulk Pack
KNA-8400B16
Full Extension
16
KNA-8401
Snap-on; large base
Anochrome
KNA-8402
Screw-secured
Anochrome
KNA-8403
Snap-on,
screw-secured
Anochrome
KNA-8404BBL
Clip-On
KNA-8400BRV16
Full Extension
16
KNA-8404BKIT
Rear socket clip-on
Zinc
KNA-8409B22
KNA-8400B18
Full Extension
18
KNA-8404EB
Clip-On
Ebony Black
KNA-8409B24
KNA-8400BRV18
Full Extension
18
KNA-8404WH
Clip-On
White
KNA-8400B20
Full Extension
20
KNA-8400BRV20
Full Extension
20
KNA-8400B22
Full Extension
22
KNA-8400BRV22
Full Extension
22
KNA-8400B24
Full Extension
24
KNA-8400BRV24
Full Extension
24
KNA-8400B26
Full Extension
26
KNA-8400BRV26
Full Extension
26
KNA-8400B28
Full Extension
28
KNA-8400BRV28
Full Extension
28
KNA-8405B10
1” Overtravel
10
KNA-8405B12
1” Overtravel
12
KNA-8405B14
1” Overtravel
14
KNA-8405B16
1” Overtravel
16
KNA-8405B18
1” Overtravel
18
KNA-8405B20
1” Overtravel
20
For use with full-extension drawer slides. Plastic.
No.
Desc.
KNA-8405B22
1” Overtravel
22
627-52
KNA-8405B24
1” Overtravel
24
KNA-8405B26
1” Overtravel
26
KNA-8405B28
1” Overtravel
28
72
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Drawer Slides, Mounting Brackets & Sockets
Unit # 3003015
Unit # 3627001
SOCKETS
Our pledge is
customer service.
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Long back socket
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Drawer Slides
Anochrome
KNA-8455B28
28
Anochrome
Side-mount design for drawers up to 24” wide in frame
or frameless applications. Features progressive telescoping action, precision steel ball bearings, lever disconnect, ball retainer latch and drawer insertion ramps.
Allows drawer adjustment without removal. 32mm hole
pattern. 1-13/16” height. 1/2” clearance each side,
+1/32” -0”.
Polybagged: 10 pairs per box, includes screws and
instructions.
Bulk Packed: 10 pairs per box; screws not included.
Unit # 1729273
FILE DRAWER SLIDES
KNA-8417P14
14
KNA-8450P18
18
Anochrome
KNA-8417P18
18
KNA-8450PEB18
18
Ebony black
KNA-8417P20
20
KNA-8450P20
20
Anochrome
Heavy-duty design for
pedestal and lateral
file drawers.
Sidemounting; for frame
and frameless construction.
Features
progressive movement on steel ball bearings with
metal retainer, drawer release clips with quick-disconnect drawer members, positive in/out stops and antibounceback mechanism. 32mm hole pattern. 3-51/64”
height. 1/2” clearance each side, +1/32” -0”. 150 lb.
load rating. Anochrome finish.
Poly Pack: Includes 5 sets individually packaged with
scres and instructions.
Bulk Pack: Includes 5 sets per carton with OD rails
and instructions. Does not include screws.
Quantity Pack. Includes 10 LH cabinet members, 10
RH cabinet members and 20 mounting rails per box.
Does not include screws.
Lgth.
Max. Drawer
No.
In.
Width In.
Pack
Full Extension
KNA-8450PEB20
20
Ebony black
KNA-8500P14
14
36
Poly
Anochrome
KNA-8500P16
16
36
Poly
18
36
Bulk
Medium-duty. Nonhanded design for use in office furniture and kitchen cabinets. Side-mounting for frame or
frameless construction. Features telescoping action
with steel ball bearings and metal retainers, lever disconnect, flexible mounting tabs and cushioned stops.
Drawer can be adjusted without removal. 1-13/16”
height. .532” clearance each side, +.032” -0”. 100-lb.
load rating. Zinc finish.
Polybagged. 1 set with screws and instructions. 10
sets per carton.
Bulk Pack. 10 sets per carton without screws.
Full Extension
Lgth.
In.
No.
Polybagged
KNA-8417P22
Bulk Pack
Full Extension – 100-Lb. Load Rating
No.
Lgth. In.
Finish
Polybagged
KNA-8450P12
12
Anochrome
KNA-8450P14
14
Anochrome
KNA-8450P16
16
Anochrome
KNA-8450PEB16
16
Ebony black
KNA-8450P22
22
KNA-8417B18
18
KNA-8450PEB22
22
Ebony black
KNA-8500B18
KNA-8417B20
20
KNA-8450P24
24
Anochrome
KNA-8500P18
18
36
Poly
KNA-8417B22
22
KNA-8450P26
26
Anochrome
KNA-8500B20
20
36
Bulk
Anochrome
KNA-8500P20
20
36
Poly
KNA-8500B22
22
36
Bulk
Anochrome
KNA-8500P22
22
36
Poly
22
36
Quantity
KNA-8417B24
KNA-8450P28
24
28
Bulk Packed
1” Overtravel
KNA-8450B12
Lgth.
In.
No.
Polybagged
KNA-8419P14
14
KNA-8419P16
16
KNA-8419P18
18
KNA-8419P20
20
KNA-8419P22
22
KNA-8419P24
24
KNA-8419P26
26
Bulk Pack
KNA-8419B16
16
KNA-8419B18
18
12
KNA-8450B14
14
Anochrome
KNA-8500Q22
KNA-8450B16
16
Anochrome
KNA-8500P24
24
36
Poly
26
36
Bulk
KNA-8450BEB16
16
Ebony black
KNA-8500B26
KNA-8450B18
18
Anochrome
KNA-8500P26
26
36
Poly
Ebony black
KNA-8500P28
28
36
Poly
KNA-8500P30
30
36
1-1/2” Overtravel
Poly
KNA-8450BEB18
18
KNA-8450B20
20
Anochrome
KNA-8450BEB20
20
Ebony black
KNA-8450B22
22
Anochrome
KNA-8450BEB22
22
Ebony black
KNA-8450B24
24
Anochrome
KNA-8450B26
26
Anochrome
KNA-8450B28
28
Anochrome
KNA-8419B20
20
1” Overtravel – 90-Lb. Load Rating
KNA-8419B22
22
No.
KNA-8419B24
24
KNA-8419B26
Drawer Slides
26
Need help with
specifications?
will be happy to
assist you!
Lgth. In.
Finish
Polybagged
KNA-8505P12
12
30
Poly
KNA-8505P14
14
30
Poly
KNA-8505P16
16
30
Poly
KNA-8505B16
16
30
Bulk
KNA-8505Q16
16
30
Quantity
Poly
KNA-8505P18
18
30
KNA-8505B18
18
30
Bulk
KNA-8505Q18
18
30
Quantity
KNA-8505P20
20
30
Poly
KNA-8455P16
16
Anochrome
KNA-8520P20*
20
30
Poly
KNA-8455P18
18
Anochrome
KNA-8505B20
20
30
Bulk
KNA-8455P20
20
Anochrome
KNA-8505Q20
20
30
Quantity
KNA-8455P22
22
Anochrome
KNA-8505P22
22
30
Poly
KNA-8455P24
24
Anochrome
KNA-8505B22
22
30
Bulk
KNA-8455P26
26
Anochrome
KNA-8505Q22
22
30
Quantity
28
Anochrome
KNA-8505P24
24
30
Poly
KNA-8505B24
24
30
Bulk
KNA-8455P28
Bulk Packed
KNA-8455B16
16
Anochrome
KNA-8505Q24
24
30
Quantity
KNA-8455BEB16
16
Ebony black
KNA-8505P26
26
30
Poly
KNA-8455B18
18
Anochrome
KNA-8505B26
26
30
Bulk
KNA-8455BEB18
18
Ebony black
KNA-8505P28
28
30
Poly
KNA-8455B20
20
Anochrome
KNA-8505P30
30
30
Poly
* 125-lb. load rating.
73
Edgebanding
& Veneers
Anochrome
26
Adhesives
& Caulk
24
KNA-8455B26
Decorative
Hardware
KNA-8455B24
DRAWER SLIDES
Self-Closing
Shelving
& Hardware
Ebony black
Screws &
Fasteners
Anochrome
22
Storage &
Convenience
22
KNA-8455BEB22
Unit # 1729272
Wood
Products
KNA-8455B22
Medium-Duty – Soft Close
Lighting
Ebony black
Cabinet Locks
& Latches
Finish
20
Abrasives
Lgth. In.
& Machines
No.
KNA-8455BEB20
BOX & FILE DRAWER SLIDES
Sinks
Unit # 1729011
Drawer Slides & Cabinet Drawer Systems
Unit # 3468001
Unit # 1729275
CABINET DRAWER SYSTEMS
DRAWER SLIDES
METABOX – Series 320
Heavy-Duty – Full Extension
Side mounted. Non-handed design with closed
position hold-in detent 2.282” H. .75” (+.030,
-.000) clearance. 200 lb. class. Anochrome.
Packed 4 sets per carton. Does not include
screws.
Lgth.
No.
In.
KNA-8800B12
12
KNA-8800B14
14
KNA-8800B16
16
KNA-8800B18
18
KNA-8800B20
20
KNA-8800B22
22
KNA-8800B24
24
KNA-8800B26
26
KNA-8800B28
Drawer Slides & Cabinet Drawer Systems
28
Series 320N
Unit # 1729276
DRAWER SLIDES
Heavy-Duty – Over-Travel
For use with drawers up to 42” wide. Side
mounted. Non-handed design with 1” overtravel. 2-9/32” H. Clearance: .89” (+.030, -.000).
200 lb. class. Chrome. Polybagged with screws.
No.
Lgth.
In.
KNA-8805P16
16
KNA-8805P22
22
KNA-8805P24
24
Series 320M
Full extension with 3/4” over-travel. Includes cabinet and drawer profiles. Suitable
for panel or face-frame cabinet construction. Rear mounting sockets optional. Static
load 100 lbs.; dynamic load 75 lbs. Tested to perform 100,000 open/close cycles.
Can be assembled manually or with METABOX drilling guide.
Type C15. Features built-in assembly prongs; can be assembled manually or with
drilling guide.
Unit # 1729277
DRAWER SLIDES
Extra Heavy-Duty
No.
Ht.
In.
Drawer Systems
Nom.
Min. Inside
Lgth. In.
Depth In.
Type C
Drawer
Lgth. In.
Finish
Cream
JUL-320N5500CCR
2-1/8
22
21-7/8
21-5/8
JUL-320N5500CWH
2-1/8
22
21-7/8
21-5/8
White
Full extension. For use in industrial, commercial, vehicle and large-drawer applications. Side or flat mounting. Features telescoping action with steel ball bearings and
heavy-duty nonmetallic stops. 180 to 500-lb. load rating, based on application. 3” H.
Clearance: 0.75”, ±.030. Anochrome finish.
Lgth.
Pairs
No.
In.
Per Pkg.
Polybagged
JUL-320N5000CCR
2-1/8
20
19-15/16
19-11/16
Cream
JUL-320N4500CCR
2-1/8
18
17-15/16
17-11/16
Cream
JUL-320N4500CWH
2-1/8
18
17-15/16
17-11/16
White
JUL-320N4000CCR
2-1/8
16
16
15-3/4
Cream
JUL-320N4000CWH
2-1/8
16
16
15-3/4
White
KNA-8900P12
12
1
JUL-320N3500CCR
2-1/8
14
14
13-3/4
Cream
KNA-8900P16
16
1
JUL-320M5500CCR
3-3/8
22
21-7/8
21-5/8
Cream
KNA-8900P18
18
1
JUL-320M5000CCR
3-3/8
20
19-15/16
19-11/16
Cream
KNA-8900P22
22
1
JUL-320M5000CWH
3-3/8
20
19-15/16
19-11/16
White
KNA-8900P30
30
1
JUL-320M4500CCR
3-3/8
18
17-15/16
17-11/16
Cream
1
JUL-320M4500CWH
3-3/8
18
17-15/16
17-11/16
White
JUL-320M4000CCR
3-3/8
16
16
15-3/4
Cream
JUL-320M4000CWH
3-3/8
16
16
15-3/4
White
JUL-320M3500CCR
3-3/8
14
14
13-3/4
Cream
Unit # 1729277
KNA-8900P36
36
Bulk Packed w/o Hardware
KNA-8900B22
22
3
KNA-8900B30
30
2
KNA-8900B32
32
2
KNA-8900B36
36
2
JUL-320M3500CWH
3-3/8
14
14
13-3/4
White
3-3/8
11
10-7/8
10-5/8
White
KNA-8900B40
40
1
JUL-320M2700CCR
KNA-8900B42
42
1
JUL-320K5500CCR
4-5/8
22
21-7/8
21-5/8
Cream
KNA-8900B48
48
1
JUL-320K5500CWH
4-5/8
22
21-7/8
21-5/8
White
74
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Ht.
In.
Nom.
Lgth. In.
Min. Inside
Depth In.
Drawer
Lgth. In.
Finish
JUL-320K5000CCR
4-5/8
20
19-15/16
19-11/16
Cream
JUL-320K5000CWH
4-5/8
20
19-15/16
19-11/16
White
JUL-320K4500CCR
4-5/8
18
17-15/16
17-11/16
Cream
CABINET DRAWER SYSTEMS
JUL-320K4500CWH
4-5/8
18
17-15/16
17-11/16
White
METABOX – Series 330
JUL-320K4000CCR
4-5/8
16
16
15-3/4
Cream
JUL-320K4000CWH
4-5/8
16
16
15-3/4
White
JUL-320K3500CCR
4-5/8
14
14
13-3/4
Cream
JUL-320K3500CWH
4-5/8
14
14
13-3/4
White
JUL-320H5500CCR
5-7/8
22
21-7/8
21-5/8
Cream
JUL-320H5500CWH
5-7/8
22
21-7/8
21-5/8
White
JUL-320H5000CCR
5-7/8
20
19-15/16
19-11/16
Cream
JUL-320H5000CWH
5-7/8
20
19-15/16
19-11/16
White
JUL-320H4500CCR
5-7/8
18
17-15/16
17-11/16
Cream
JUL-320H4500CWH
5-7/8
18
17-15/16
17-11/16
White
JUL-320H4000CCR
5-7/8
16
16
15-3/4
Cream
JUL-320H4000CWH
5-7/8
16
16
15-3/4
White
JUL-320H3500CCR
5-7/8
14
13-3/4
Cream
JUL-320N5500C15WH
2-1/8
22
21-7/8
21-5/8
White
JUL-320N5000C15WH
2-1/8
20
19-15/16
19-11/16
White
JUL-320N4500C15WH
2-1/8
18
17-15/16
17-11/16
White
JUL-320N4000C15WH
2-1/8
16
16
15-3/4
White
JUL-320N3500C15WH
2-1/8
14
14
13-3/4
White
JUL-320M5500C15WH
3-3/8
22
21-7/8
21-5/8
White
JUL-320M5000C15WH
3-3/8
20
19-15/16
19-11/16
White
JUL-320M4500C15WH
3-3/8
18
17-15/16
17-11/16
White
JUL-320M4000C15WH
3-3/8
16
16
15-3/4
White
JUL-320M3500C15WH
3-3/8
14
14
13-3/4
White
JUL-320M2700C15WH
3-3/8
11
10-7/8
10-5/8
White
JUL-330M400PCCR
3-1/2
16
JUL-320K5500C15WH
4-5/8
22
21-7/8
21-5/8
White
JUL-330M400PCWH
3-1/2
16
JUL-320K5000C15WH
4-5/8
20
19-15/16
19-11/16
White
JUL-330M450PCCR
3-1/2
JUL-320K4500C15WH
4-5/8
18
17-15/16
17-11/16
White
JUL-330M500PCCR
JUL-320K4000C15WH
4-5/8
16
16
15-3/4
White
JUL-330M550PCCR
JUL-320K3500C15WH
4-5/8
14
14
13-3/4
White
JUL-320H5500C15WH
5-7/8
22
21-7/8
21-5/8
JUL-320H5000C15WH
5-7/8
20
19-15/16
JUL-320H4500C15WH
5-7/8
18
17-15/16
JUL-320H4000C15WH 5-7/8
Cabinet Drawer Systems
16
16
16-5/16
15-3/4
Cream
16-5/16
15-3/4
White
18
18-5/16
17-11/16
Cream
3-1/2
20
20-1/4
19-11/16
Cream
3-1/2
22
22-1/4
21-5/8
Cream
JUL-330M550PCWH
3-1/2
22
22-1/4
21-5/8
White
White
JUL-330H400PCCR
6
16
16-5/16
15-3/4
Cream
19-11/16
White
JUL-330H400PCWH
6
16
16-5/16
15-3/4
White
17-11/16
White
JUL-330H450PCCR
6
18
18-5/16
17-11/16
Cream
15-3/4
White
JUL-330H500PCCR
6
20
20-1/4
19-11/16
Cream
JUL-330H550PCCR
6
22
22-1/4
21-5/8
Cream
JUL-330H550PCWH
6
22-1/4
21-5/8
White
22
Type C15
JUL-330M400PC15WH
3-1/2
16
16-5/16
15-3/4
White
JUL-330M450PC15WH
3-1/2
18
18-5/16
17-11/16
White
JUL-330M500PC15WH
3-1/2
20
20-1/4
19-11/16
White
JUL-330M550PC15WH
3-1/2
22
22-1/4
21-5/8
White
JUL-330H400PC15WH
6
16
16-5/16
15-3/4
White
JUL-330H450PC15WH
6
18
18-5/16
17-11/16
White
JUL-330H500PC15WH
6
20
20-1/4
19-11/16
White
JUL-330H550PC15WH
6
22
22-1/4
21-5/8
White
75
Shelving
& Hardware
Screws &
Fasteners
Finish
Storage &
Convenience
Nom.
Min. Inside
Lgth. In.
Depth In.
Type C
Wood
Products
Ht.
In.
Lighting
Drawer
Lgth. In.
No.
Cabinet Locks
& Latches
Series 330H
Full extension with 3/4” over-travel. Includes cabinet and drawer profiles.
Type C15. Features built-in assembly prongs; can be assembled manually or with
drilling guide.
Abrasives
MANUFACTURERS’
CATALOGS
Series 330M
14
Type C15
Surfacing
Products
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Unit # 3468206
& Machines
No.
Sinks
Cabinet Drawer Systems
Front Fixing Brackets & Hanging Rail Sets
Unit # 3468208
HANGING RAIL SETS
METAFILE
Unit # 3468256
FRONT FIXING BRACKETS
METABOX
Series ZSF1510
Series ZSF1700
Series ZSF1610
Series ZSF1800
Includes (2) 3mm x 13mm x 550mm zinc coated steel hanging rails, (4) rail support
brackets, (4) rail support covers, (2) 500mm glide profiles, and (8) flathead #6 x 3/4”
wood screws.
Series ZSF1200
Series ZSF1300
METAFILE Set Contents
Series ZSF130E
Desc.
Fig.
No.
Qty.
Hanging rails, 3mm x 13mm x 550mm
1
2
Rail support brackets
2
4
Rail support covers
3
4
Glide profiles, 500mm
4
2
Flathead wood screws, #6 x 3/4”
5
8
Nickel-plated steel construction.
Standard Front Fixing Brackets
No.
Desc.
For Series 320N
Mounting
Type
JUL-ZSF151004
Right side
Screw-on
JUL-ZSF151005
Left side
Screw-on
JUL-ZSF161004
Right side
JUL-ZSF161005
Left side
For Series 320M, K, H & 330M, H
METAFILE Sets
Press-in
Press-in
No.
Color
JUL-ZRM5500DG
Dust gray
JUL-ZSF1700L
Left side
Screw-on
JUL-ZRM5500USCR
Cream
JUL-ZSF1700R
Right side
Screw-on
JUL-ZRM5500USWH
White
JUL-ZSF1800L
Left side
Press-in
JUL-ZSF1800R
Right side
Press-in
No.
Clip-On Front Fixing Brackets
No.
Desc.
For Series 320M, K, H & 330M, H
Accessories
Mounting
Type
JUL-ZRM0005
JUL-ZRM0003CR
JUL-ZSF1200L
Left side
Screw-on
JUL-ZSF1200R
Right side
Screw-on
JUL-ZRM0003WH
Desc.
METAFILE Set Components
Finish
Fig.
No.
Rail support bracket; requires 4 per drawer
Natural
2
Rail support cover
Cream
3
White
3
Rail support cover
Lateral File Accessories
JUL-ZSF1300L
Left side
Press-in
JUL-ZRM0004CR
Lateral bracket; requires 4 per drawer
Cream
6
JUL-ZSF1300R
Right side
Press-in
JUL-ZRM0004WH
Lateral bracket; requires 4 per drawer
White
6
Steel hanging rail, 3mm x 13mm x
1100mm; cut to length
Zinc-coated
7
Glide profile, 1100mm; cut to length
Cream
8
JUL-ZRM1100GWH
Glide profile, 1100mm; cut to length
Front Fixing Brackets & Hanging Rail Sets
White
8
JUL-ZSF130EL
Left side
Expando
JUL-ZSF130ER
Right side
Expando
Series ZAA3500
JUL-ZRM1100S
JUL-ZRM1100GCR
Series ZAA3700
Quality Products
Nylon Cover Caps
For Use
With
No.
Color
JUL-ZAA3500CR
Cream
ZSF1700/ZSF1800
JUL-ZAA3500WH
White
ZSF1700/ZSF1800
JUL-ZAA3700CR
Cream
ZSF1200/1300/130E
JUL-ZAA3700WH
White
ZSF1200/1300/130E
76
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Quality People
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit# 3468131
DRAWER SIDES
CORNER SUPPORTS
BOXSIDE – METABOX
Pull-Out Tray – METABOX
Sinks
Unit# 3468222
Surfacing
Products
Gallery Rails, Drawer Sides, Brackets & Supports
Unit# 3468130
GALLERY RAIL SETS
Double
Triple
50 per pkg.
No.
White
JUL-ZTU00Z0CR
Cream
White
JUL-ZTU00D0CR
Cream
Unit# 3468129
400
JUL-Z36H367SE01WH
400
White
JUL-Z36H417SE01NI
450
Nickel
Gallery Rail Sets
JUL-Z36H417SE01WH
450
White
JUL-Z36H467SE01NI
500
Nickel
JUL-Z36H467SE01WH
500
White
550
Gray
550
Nickel
Color
Adjustable Rails
JUL-ZRE371SIDWH
White
16
JUL-Z36H517SE01GR
JUL-ZRE421SIDWH
White
18
JUL-Z36H517SE01NI
JUL-ZRE471SIDWH
White
20
22
JUL-Z36H517SE01WH
550
128mm Height – Fig. 7
White
JUL-ZRE521SIDWH
White
Cross Rails
JUL-Z36M367SE01WH
400
White
JUL-Z36M417SE01GR
450
Gray
JUL-Z36M417SE01NI
450
Nickel
JUL-Z36M417SE01WH
450
White
JUL-Z36M467SE01NI
500
JUL-Z36M517SE01GR
JUL-Z36M517SE01NI
JUL-ZRG1104UWH
White
–
JUL-ZRG1104UCR
Cream
–
JUL-ZRG1094UCH
Chrome
–
JUL-ZRG1094UGRAY
Gray
–
JUL-Z36M517SE01WH
Single
No.
Double
Single
JUL-ZRU00E001GRAY
Single
Gray
JUL-ZRU00E001WH
Single
White
JUL-ZRU00Z001CR
Double
Cream
JUL-ZRU00Z001GRAY
Double
Gray
JUL-ZRU00Z001WH
Double
White
Double divider
Cream
JUL-ZRU00F0GRAY
Double divider
Gray
JUL-ZRU00F0WH
Double divider
White
Series 3030 & 3050
Screw on design for use with Metabox interior drawers.
Nylon construction.
No.
Desc.
For Series 320N
JUL-ZIF301002RWH
Right hand
White
550
Gray
JUL-ZIF300002CR
Right hand
Cream
550
Nickel
JUL-ZIF300002WH
Right hand
White
White
JUL-ZIF300003CR
Left hand
Cream
JUL-ZIF300003WH
Left hand
For Series 320K
White
JUL-ZIF3030RWH
White
550
Right hand
JUL-ZIF3030LWH
Left hand
For Series 320H
Accessories – Fig. 5
No.
Color
White
Cream
JUL-ZRU00F0CR
Series 3010
Nickel
Color
JUL-ZRU00E001CR
Interior – METABOX
JUL-ZIF301003LWH
Left hand
For Series 320M
Double Divider
Connectors
Desc.
Desc.
Color
JUL-ZRU10BIE
Gallery connector
Gray
Gallery Rails, Drawer Sides, Brackets & Supports
White
JUL-ZIF3050RWH
Right hand
White
JUL-ZIF3050RCR
Right hand
Cream
JUL-ZIF3050LWH
Left hand
White
JUL-ZIF3050LCR
Left hand
Cream
Abrasives
No.
Drawer
Lgth. In.
Nickel
Shelving
& Hardware
JUL-Z36H367SE01NI
other detailed information is available
upon request.
Screws &
Fasteners
ZRE Series. Includes 2 adjustable rails and 2 rear fixing brackets.
ZRG Series. 44” length; cut to size.
Storage &
Convenience
Color
Wood
Products
ZRG Series
Triple
JUL-ZTU00D0WH
Lighting
Drawer
No.
Lgth. mm
64mm Height – Fig. 6
Cabinet Locks
& Latches
Drawer Sides
JUL-ZTU00Z0WH
Decorative
Hardware
Color
Double
77
& Machines
ZRE Series
Adhesives
& Caulk
Edgebanding
& Veneers
METABOX
Drawer Runners, Sockets & Slides
Unit # 3468151
Unit# 3468128
DRAWER ACCESSORIES
CONCEALED DRAWER RUNNERS
METABOX
Frameless – SOLO
Single extension runner system for use in
panel cabinets. Features cream colored epoxycoated steel profiles, self-closing action and
positive lift-over stop for drawer removal.
Drawer thickness of 5/8’’ max. Load rating 100lb. static, 75-lb. dynamic. Package Qty. 10.
JUL-2983210 & JUL-2983230
JUL-2954000
No. JUL-2983210 & JUL-2983230. Prevents drawer front from contacting cabinet
face. Non-handed; snaps into place. Requires two per drawer. 1/16’’ gap.
Nos. JUL-ZSB009001 and JUL-ZSB004501. For use with wide drawers; secures
front panel to bottom. Attaches with #6 x 1/2’’ screws (not included).
No. JUL-2954000. For mounting drawer runners to underside of counter or to cabinet floor. Attaches with #6 x 1/2’’ screws (not included).
Pkg.
No.
Desc.
Material
Qty.
Cabinet
Depth In.
No.
Drawer
Lgth. In.
Cabinet
Profile Lgth. In.
Min. Inside
Depth In.
JUL-2983210
Positive drawer stop, 1.5mm
Synthetic
250
JUL-2622290NCR
12
9
10-1/2
10-3/4
JUL-2983230
Positive drawer stop, 3mm
Synthetic
250
JUL-2623050NCR
15
12
13-1/2
13-3/4
20
JUL-2623810NCR
18
15
16-1/2
16-3/4
JUL-2624570NCR
21
18
19-1/2
19-3/4
JUL-2625330NCR
24
21
22-1/2
22-3/4
JUL-2625330N05CR
24
21
21-3/4
–
JUL-ZSB009001
Support bracket for standard drawers
JUL-ZSB004501
Support bracket for interior roll-out
trays
JUL-2954000
Universal mounting bracket
Drawer Runners, Sockets & Slides
Stainless steel
Stainless steel
20
Zinc coated steel
4
* For inset applications. Min. inside depth variable based on application.
Unit #3468116
CONCEALED DRAWER RUNNERS
Unit# 3468223
Face Frame – SOLO
Non-Detachable – SOLO
Non-handed, two-piece design features built-in self alignment and
two 5/16” dia. x 3/8” L dowels.
Min. Back Panel
Thick. In.
No.
JUL-2956210
1/8
Unit # 4030002
DRAWER SLIDES
Steel construction with cream-colored epoxy coating. Self-closing. Features integral
front mounting brackets, positive lift-over stop for drawer removal, and self-lubricating synthetic rollers. Attaches to drawer bottom with wood screws. Load rating 100lb. static, 75-lb. dynamic. For 16mm (5/8”) max. drawer thickness. 10 sets per box.
Self-Closing – Concealed – CS02 Series
JUL-262H2290NCR
12
9
10-1/2
10-15/16
Features captive RH profiles and tolerance-compensating LH profiles, with integrated front brackets for frame mounting. White.
Complete Sets. Include LH and RH drawer and
cabinet members.
Drawer Slides
Lgth.
No.
mm
Complete Sets
JUL-262H3050NCR
15
12
13-1/2
13-15/16
CS02A229WH1B
229
JUL-262H3810NCR
18
15
16-1/2
16-15/16
CS02A305WH1B
305
CS02A381WH1B
381
CS02A457WH1B
457
CS02A533WH1B
LH/RH Cabinet Member Sets
533
CS02A457WH1CM
457
CS02A533WH1CM
LH/RH Drawer Member Sets
533
CS02A457WH1DM
457
CS02A533WH1DM
533
Drawer Runners
Dim. In.
Cabinet
Depth In.
No.
JUL-262H4570NCR
Drawer
Lgth. In.
Cabinet
Profile Lgth. In.
Min. Inside
Depth In.
21
18
19-1/2
19-15/16
JUL-262H4570N05CR*
21
18
18-3/4
–
JUL-262H5330NCR
24
21
22-1/2
22-15/16
JUL-262H5330N05CR*
24
21
21-3/4
–
* For inset applications. Min. inside depth variable based on application.
Rear Mount Sockets
Synthetic construction. Adjustable for height and depth; self-aligning side-to-side.
Can be screwed or stapled to cabinet back. Package Qty. 500.
No.
Desc.
JUL-29532036L
Left hand
JUL-29532036R
Right hand
78
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Accessories
No.
CS02000A6
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Desc.
Rear socket, nonhanded
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Drawer Runners
Unit# 3468248
DRAWER RUNNERS
Sinks
Partial Extension – TANDEM
Unit # 3468009
DRAWER RUNNERS
JUL-552F4570N
18
20-9/16
18-7/8
Panel Cabinet
Min. Inside
Depth In.
No.
Drawer
Lgth. In.
JUL-552H5330N
21
23-9/16
21-7/8
21-3/4
JUL-552H4570N
18
20-9/16
18-7/8
18-3/4
DRAWER RUNNERS
JUL-552H3810N
15
17-9/16
15-7/8
15-3/4
Heavy-Duty – TANDEM
JUL-552H3050N
Drawer Runners
12
14-9/16
12-7/8
12-3/4
Frame Cabinet
Inside Depth In.
Min.
Max.
Adhesives
& Caulk
For drawer sides up to 19” thick. Features permanently lubricated synthetic rollers in
concealed carriages, and locking device for easy drawer insertion and removal. 100lb. load rating.
Drawer
Frame Cabinet
Lgth.
Inside Depth In.
No.
In.
Min.
Max.
Decorative
Hardware
Zinc coated steel construction with die cast locking
devices and synthetic, spring-loaded release lever.
Self-closing, concealed roller carriage with automatic latch and easy release. Permanently lubricated rollers. Force guided right side; ±1/16”
tolerance left side. Drawer height adjusts without
tools. Static load 100 lbs.; dynamic load 75 lbs.
Max. drawer thickness 5/8”. 10 per pkg.
Note: 4mm setback required for overlay drawer
fronts.
Edgebanding
& Veneers
Single Extension – TANDEM
Unit # 3468045
Unit # 3468008
DRAWER RUNNERS
Drawer
Lgth. In.
Cabinet
Depth In.
Over
Extension In.
JUL-568H4570B
18
21
0
JUL-568H5330B
21
24
0
JUL-5686100B
24
27
3/4
JUL-5686860B
27
30
13/16
JUL-5687620B
30
33
1-1/8
Panel Cabinet
Min. Inside
Depth In.
21
23-9/16
21-7/8
21-1/2
JUL-568F4570C
18
21
0
JUL-562H5330C
21
23-9/16
21-7/8
21-3/4
JUL-568F4570B
18
21
0
JUL-562F4570C
18
20-9/16
18-7/8
18-1/2
JUL-568F5330C
21
24
0
JUL-562H4570C
18
20-9/16
18-7/8
18-3/4
JUL-568F5330B
21
24
0
JUL-562F3810C
15
17-9/16
15-7/8
15-1/2
JUL-568A6100B
24
27
3/4
JUL-562H3810C
15
17-9/16
15-7/8
15-3/4
JUL-562F3050C
12
14-9/16
12-7/8
12-1/2
JUL-562H3050C
12
14-9/16
12-7/8
TANDEM plus BLUMOTION
12-3/4
JUL-562F5330B
21
23-9/16
21-7/8
21-1/2
JUL-562H5330B
21
23-9/16
21-7/8
21-3/4
JUL-562F4570B
18
20-9/16
18-7/8
18-1/2
JUL-562H4570B
18
20-9/16
18-7/8
18-3/4
JUL-562F3810B
15
17-9/16
15-7/8
15-1/2
JUL-562H3810B
15
17-9/16
15-7/8
15-3/4
JUL-562F3050B
12
14-9/16
12-7/8
12-1/2
JUL-562H3050B
12
14-9/16
12-7/8
12-3/4
JUL-562F2290B10
9
11-9/16
9-7/8
9-1/2
JUL-562H2290B10
9
11-9/16
9-7/8
9-1/2
Lighting
JUL-562F5330C
Wood
Products
TANDEM Plus BLUMOTION
Cabinet Locks
& Latches
Frame Cabinet
Inside Depth In.
Min.
Max.
TANDEM Plus
Storage &
Convenience
TANDEM Plus
Screws &
Fasteners
No.
We are continually
Call us with your
inquiries.
Abrasives
No.
Drawer
Lgth. In.
For drawer sides up to 5/8” thick. Features rear tilt adjustment AND, permanently
lubricated synthetic rollers in concealed carriages. Fully concealed. 110-lb. load rating.
79
& Machines
Zinc coated steel construction with die cast locking
devices and synthetic, spring-loaded release lever.
Self-closing, concealed roller carriage with automatic latch and easy release. Permanently lubricated rollers. Force guided right side; ±1/16”
tolerance left side. Drawer height adjusts without
tools. Static load 100 lbs.; dynamic load 75 lbs.
Note: 4mm setback required for overlay drawer
fronts.
Series JUL-562H. Max. drawer thickness 5/8”.
Series JUL-562F. Max. drawer thickness 3/4”.
Shelving
& Hardware
Full Extension – TANDEM
Locking Devices, Brackets, Sockets & Drawer Openers
Unit # 3468010
REAR MOUNTING BRACKETS
Drawer Runner
For use with Series 552 and 562 concealed drawer runners. Non-handed design. Rear mount. Zinc.
Unit #3468079
LOCKING DEVICES
TANDEM
Standard
Vertical Mount
No.
Qty.
JUL-2953750
100
Positive Stop
Unit# 3468224
Non-Detachable – TANDEM
Synthetic material. Non-handed, two-piece design features
built-in self alignment with 1/8” tolerance, and two 5/16” dia.
x 3/8” L dowels. For use with Series 265, 552 and 562 runners.
Min. Back Panel
Thick. In.
No.
Narrow Drawer
Inset – Depth Adjustable
Inset – Non-Adjustable
JUL-2956410
1/4
Unit# 3468211
REAR MOUNTING BLOCKS
Roll-Out Shelf
Servo-Drive
Die-cast zinc construction with spring-loaded release levers. Features ±1/8” height
adjustment. Each drawer requires (1) right hand and (1) left hand locking device.
100 per pkg.
Standard. For 4-3/4” minimum drawer width.
Vertical Mount. Minimizes sub-front splitting. For drawers with 1/2” bottom recess
and minimum 5/8” sub-front thickness.
Positive Stop. For roll-out trays and other applications where precise stopping is
required.
Narrow Drawer. For drawers with interior width between 3-3/4” and 4-3/4”.
Inset – Non-Adjustable. For interior roll-out applications. Not for use with 552H
series.
Inset – Depth Adjustable. For use in inset applications where precise drawer front
alignment is required.
Servo-Drive. For inset or overlay applications. Features integrated bumper and
adjustable stop with 5/32” depth range.
No.
Desc.
Desc.
Standard
JUL-T51170004L
Left
JUL-T51170004R
Right
Eliminates need to edge bore holes for hooks on roll-outs. For use with min. 16-5/8”
material. Can be used with 552H and 562H TANDEM runners.
No.
Desc.
JUL-T517000
Rear mount socket for TANDEM pull-out shelf
Unit# 3468175
DRAWER OPENERS
Tip-On – TANDEM
Vertical Mount
JUL-T51170020L
Left
JUL-T51170020R
Right
Positive Stop
JUL-T511700POL
Left
JUL-T511700POR
Right
Narrow Drawer
JUL-T51070020L
Left
JUL-T51070020R
Right
Inset – Depth Adjustable
JUL-T511700PVL
Left
JUL-T511700PVR
Right
Inset – Non-Adjustable
JUL-T511700PVL
Left
JUL-T511700PVR
Right
Servo-Drive
JUL-T511700PSL
Left
JUL-T511700PSR
Locking Devices, Brackets, Sockets & Drawer Openers
Right
For use in frame and panel cabinet applications. Opens drawer with a touch.
Attaches to cabinet profile without tools. Adjustable depth. Includes (2) each: TIPON mechanisms, triggers and rear hook spacers.
Note: Works only with TANDEM Plus 562 H/F series runners without BLUMOTION.
Max.
In/Out Adjust.
No.
Load Lbs.
Range mm
JUL-T557150
80
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
45
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
-3 to +2
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Drawer Slides, Systems, Sets & Fixing Brackets
19-11/16
21-5/8
JUL-358N4000I
15-3/4
Edgebanding
& Veneers
TANDEMBOX
Unit# 3468155
DRAWER SYSTEMS
Requires minimum #6 x 3/4” truss head screw for
mounting (not included).
Mounting
No.
Type
“M” Back Height – TANDEMBOX
JUL-ZSF350202
Drawer Slides
Screw-on
No.
8000-15-SOFT
15
8000-18-SOFT
18
8000-21-SOFT
21
Lgth.
In.
Unit # 3468110
TANDEMBOX
Accessories
Desc.
Features double-wall drawer sides with 2-dimensional
drawer front adjustment.
No.
Unit # 3468156
Cabinet Profiles
Lgth. In.
Nominal
75 Lb. Capacity
Actual
JUL-5582701B
11
10-5/8
JUL-5583501B
14
13-3/4
JUL-5584001B
16
15-3/4
DRAWER SYSTEMS
JUL-5584501B
18
17-11/16
“N” Back Height – TANDEMBOX
JUL-5585001B
20
19-11/16
JUL-5585501B
Features double-wall drawer sides with 2-dimensional
drawer front adjustment. 75 lb. capacity.
Cabinet Profiles. Feature BLUMOTION soft-close
system.
Cabinet Profiles
No.
Lgth. In.
Nominal
Actual
JUL-5584001B
16
15-3/4
JUL-5584501B
18
17-11/16
JUL-5585001B
20
19-11/16
JUL-5585501B
22
21-5/8
Drawer Profile Sets – Include Left & Right
No.
Lgth. In.
Nominal
Actual
Gray
22
110 Lb. Capacity
21-5/8
Unit # 3468251
JUL-5594501B
18
17-11/16
JUL-5595001B
20
19-11/16
JUL-5595501B
22
21-5/8
JUL-5596001B
24
23-5/8
JUL-5596501B
26
25-9/16
Drawer Profiles
Lgth. In.
Nominal
Gray
For attaching drawer front to drawer profile runners. 2
per set.
Mounting
No.
Type
JUL-ZSF3902
Inserta
Screws &
Fasteners
8000-CLIPS
Front mounting clips
Drawer Slides, Systems, Sets & Fixing Brackets
DRAWER SIDE SETS
Storage &
Convenience
Rear bracket
BOXSIDE – TANDEMBOX
JUL-358M3502S
14
13-3/4
Double-wall construction. Includes left and right sides.
5” height.
Lgth.
No.
In.
Finish
JUL-358M4002S
16
15-3/4
JUL-Z37H418IE
18
Stainless steel
JUL-358M4502S
18
17-11/16
JUL-Z37H468IE
20
Stainless steel
19-11/16
JUL-Z37H518IE
22
Stainless steel
21-5/8
JUL-Z37H518SE
22
Gray
23-5/8
JUL-Z37H568IE
24
Stainless steel
25-9/16
JUL-Z37H618IE
26
Stainless steel
JUL-Z37H618SE
26
Gray
No.
JUL-358M5002S
JUL-358M5502S
JUL-359M6002S
JUL-359M6502S
20
22
24
26
Stainless Steel
Actual
JUL-358M2702I
11
10-5/8
JUL-358M3502I
14
13-3/4
JUL-358M4002I
16
15-3/4
JUL-358M4502I
18
17-11/16
JUL-358N4002S
16
15-3/4
JUL-358M5002I
20
19-11/16
JUL-358N4502S
18
17-11/16
JUL-358M5502I
22
21-5/8
JUL-358N5002S
20
19-11/16
JUL-359M6002I
24
23-5/8
JUL-358N5502S
22
21-5/8
JUL-359M6502I
26
25-9/16
Abrasives
No.
8000-21-BRKT
Wood
Products
Full-extension design with lever disconnect. Coldrolled steel construction. 75-lb. load rating. Includes left
and right drawer clips.
Lighting
16
Unit # 3468257
Adhesives
& Caulk
20
JUL-358N5502I
22
Brushed Stainless Steel
Decorative
Hardware
JUL-358N5002I
Shelving
& Hardware
17-11/16
Cabinet Locks
& Latches
Undermount – Soft Close
15-3/4
18
Phone or FAX
your order today!!
81
& Machines
Unit # 4031047
DRAWER SLIDES
16
JUL-358N4502I
Sinks
Stainless Steel
JUL-358N4002I
Gallery Rods, Drawer Accessories & Profile Sets
Unit # 3468084
Unit# 3468244
REAR FIXING BRACKETS
STABILIZER SETS
TANDEMBOX
Lateral – TANDEMBOX
Unit# 3468249
GALLERY RODS
Series Z30M(N)000S04
Adds stability to wide drawers. Cut to size.
JUL-ZRG1094UGRAY
Contents
Series Z30D000S04
Series Z30B000S04
For attaching drawer back to drawer profile runners.
Includes left and right brackets.
For Drawer
No.
Color
Ht.
JUL-Z30M000S04
JUL-Z30N000S04
JUL-ZRG346VICCH
No. JULZRG1094UGRAY. Cross rod for interior front.
Cut to size.
Nos. JUL-ZRG346VICCH. Set includes two rods.
Lgth.
No.
Color
In.
JUL-ZRG1094UGRAY
JUL-ZRG346VICCH
JUL-ZRG346VICGRAY
Nickel
Gray
43-1/16
Chrome
16
Gray
16
M
Nickel
N
JUL-Z30N000S04SW
Silk white
N
JUL-Z30N000S04TB
Terra black
N
JUL-Z30M000S04GR
Gray
M
JUL-Z30B000S04
Nickel
B
JUL-Z30B000S04GR
Gray
B
JUL-Z30D000SNI
Nickel
D
Desc.
Fig.
No.
Qty.
42-3/8” L linkage rod; cut to size
1
1
Gray pinion gears
2
2
Right & Left rear brackets
3
1
Right & Left gear racks
4
1
Stabilizer Sets
No.
For Runner
Lgth. In.
JUL-ZST500B
20
JUL-ZST550B
22
Unit# 3468245
JUL-Z30D000SGRAY
Gray
D
Gallery Rods, Drawer Accessories & Profile Sets
Interior – TANDEMBOX
Unit# 3468216
Unit # 3468247
Dust gray.
GALLERY ROD SETS
FRONT RAILS
TANDEMBOX
Interior – TANDEMBOX
No.
For
Drawer Ht.
JUL-ZIF72BO
B
JUL-ZIF73DO
D
JUL-ZIF70M0
M
Unit # 3468284
DRAWER PROFILE SETS
Gallery Rod Sets
TANDEMBOX Intivo – “N” Height
Runner
Lgth. In.
Color
JUL-ZRG396VICCH
18
Chrome
JUL-ZRG396VICGRAY
18
Gray
JUL-Z31A1081AGR
Gray
JUL-ZRG446VICCH
20
Chrome
JUL-Z31A1081ANI
Nickel
JUL-ZRG446VICGRAY
20
Gray
JUL-ZRG496VICCH
22
Chrome
JUL-ZRG496VICGRAY
22
Gray
JUL-ZRG546VICCH
24
Chrome
JUL-ZRG546VICGRAY
24
Gray
JUL-ZRG596VICCH
26
Chrome
JUL-ZRG596VICGRAY
26
Gray
No.
Aluminum construction. 42-9/16” L. Cut to size.
No.
Color
Unit# 3468246
INTERIOR HANDLES
Front – TANDEMBOX D
Includes left and right profiles with color-matching
cover caps.
Lgth. In.
No.
Nom.
Actual
Silk White
Accessories
JUL-ZIF7005
JUL-ZIF7008
JUL-ZRR5000NI
82
Desc.
Color
JUL-ZIF7005
M
Back adapter
Nickel
JUL-ZIF7008
D
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
16
15-3/4
JUL-358N4502SSW
18
17-11/16
JUL-358N5002SSW
20
19-11/16
JUL-358N5502SSW
Use 2 handles for cabinet widths 38” and up. Dust
gray.
For
No.
Drawer Ht.
No.
JUL-358N4002SSW
22
Terra Black
21-5/8
JUL-358N4002ITB
16
15-3/4
JUL-358N4502ITB
18
17-11/16
JUL-358N5002ITB
20
19-11/16
JUL-358N5502ITB
22
21-5/8
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
17-11/16
JUL-358L5002IA2I
20
19-11/16
JUL-358L5502IA2I
22
21-5/8
JUL-358L6002IA2I
24
23-5/8
JUL-358L6502IA2I
26
25-9/16
Sinks
18
Edgebanding
& Veneers
15-3/4
JUL-358L4502IA2I
For TANDEMBOX Intivo “D” height interior roll-out
drawers. Attaches to drawer profile for 7-13/16” total
drawer height. Includes left and right extensions.
Lgth. In.
JUL-358M5004SGZTB
20
JUL-358M5504SGZTB
22
Stainless Steel
JUL-358M5004IGZI
20
JUL-Z37L260SDSW
11
10-5/8
JUL-Z37L340SDSW
14
13-3/4
JUL-Z37L390SDSW
16
15-3/4
19-11/16
JUL-Z37L440SDSW
18
17-11/16
21-5/8
JUL-Z37L490SDSW
20
19-11/16
JUL-Z37L540SDSW
22
21-5/8
JUL-Z37L590SDSW
24
TANDEMBOX Intivo
19-11/16
21-5/8
25-9/16
JUL-Z37L260SDTB
11
10-5/8
JUL-Z37L340SDTB
14
13-3/4
For use with “D” height drawers; two required per
drawer.
Mounting
No.
Type
JUL-Z37L390SDTB
16
15-3/4
JUL-Z37L440SDTB
18
17-11/16
JUL-Z37L490SDTB
20
19-11/16
JUL-ZSF532E
Expando
JUL-Z37L540SDTB
22
21-5/8
Screw-on
JUL-Z37L590SDTB
24
19-11/16
JUL-358M5504IGZI
22
21-5/8
Drawer Profile Sets, Fixing Brackets & Extensions
Unit # 3468283
DRAWER PROFILE SETS
JUL-ZSF5220
TANDEMBOX Intivo – “D” Height
25-9/16
JUL-Z37L260SDI
11
10-5/8
JUL-Z37L340SDI
14
13-3/4
REAR FIXING BRACKET SETS
JUL-Z37L390SDI
16
15-3/4
TANDEMBOX Intivo
JUL-Z37L440SDI
18
17-11/16
JUL-Z37L490SDI
20
19-11/16
JUL-Z37L540SDI
22
21-5/8
JUL-Z37L590SDI
24
23-5/8
JUL-Z37L640SDI
26
25-9/16
Includes left and right profiles with color-matching
cover caps.
Lgth. In.
No.
Nom.
Actual
Silk White
11
10-5/8
JUL-358L3502SA2SW
14
13-3/4
JUL-358L4002SA2SW
16
15-3/4
JUL-358L4502SA2SW
18
17-11/16
JUL-358L5002SA2SW
20
19-11/16
JUL-358L5502SA2SW
22
21-5/8
JUL-358L6002SA2SW
24
23-5/8
JUL-358L6502SA2SW
26
Terra Black
25-9/16
JUL-358L2702SA2TB
10-5/8
11
13-3/4
23-5/8
JUL-Z37L640SDTB
26
Stainless Steel
Unit # 3468295
JUL-358L2702SA2SW
23-5/8
JUL-Z37L640SDSW
26
Terra Black
JUL-Z30D Series
Lighting
JUL-358M5504SGZSW
22
Terra Black
Actual
JUL-Z30M & Z30N Series
Cabinet Locks
& Latches
20
JUL-Z30M Series. Requires two sets per application.
JUL-Z30N Series. For use with wood back on center
section of drawer.
No.
Finish
For “D” Height Drawers
JUL-Z30D000SLSW
Silk white
JUL-Z30D000SLTB
Terra black
For “M” Height Drawers
JUL-358L3502SA2TB
14
JUL-358L4002SA2TB
16
15-3/4
JUL-358L4502SA2TB
18
17-11/16
JUL-358L5002SA2TB
20
19-11/16
JUL-358L5502SA2TB
22
21-5/8
JUL-Z30N000S04SW
Silk white
JUL-358L6002SA2TB
24
23-5/8
JUL-Z30N000S04TB
Terra black
JUL-358L6502SA2TB
26
25-9/16
JUL-Z30M000S04SW
Proudly Serving
Abrasives
JUL-358M5004SGZSW
Nom.
Silk White
Kansas, Missouri
& Oklahoma
Silk white
JUL-Z30M000S04TB
Terra black
For “N” Height Drawers
83
& Machines
For “M” height wrap-around sink drawers. Includes left
and right profiles.
Lgth. In.
No.
Nom.
Actual
Silk White
No.
Unit # 3468294
Adhesives
& Caulk
16
Decorative
Hardware
JUL-358L4002IA2I
13-3/4
Inside – TANDEMBOX Intivo
Shelving
& Hardware
10-5/8
14
Screws &
Fasteners
11
JUL-358L3502IA2I
Unit # 3468289
BOXCAP
Storage &
Convenience
JUL-358L2702IA2I
DRAWER PROFILE SETS
Unit # 3468287
DRAWER PROFILE EXTENSIONS
Wood
Products
Lgth. In.
Nom.
Actual
Stainless Steel
No.
Surfacing
Products
Drawer Profile Sets, Fixing Brackets & Extensions
Drawer Caps, Handles, Brackets, Rails & Adapters
Unit # 3468298
Unit # 3468301
DRAWER FRONT HANDLES
DRAWER CROSS RAILS
Interior – TANDEMBOX Intivo
TANDEMBOX Intivo
Unit # 3468286
DESIGN ELEMENT SETS
TANDEMBOX Intivo
Handle
For interior roll-out drawers with design element or
BOXCAP. Cut to size.
No.
Finish
Handle w/ Latch
For “M” height interior roll-out drawers.
No.
Handle
Finish
JUL-ZIF80M5SW
Silk white
JUL-ZIF80M5TB
Terra black
Features 8mm tempered glass construction with
frosted finish. Includes left and right elements.
Lgth. In.
No.
Nom.
Actual
JUL-ZIF80M5
JUL-ZIF80M7SW
Silk white
JUL-Z37G210DUS
11
10-5/8
JUL-ZIF80M7TB
Terra black
JUL-Z37G290DUS
14
13-3/4
JUL-ZIF80M7
JUL-Z37G340DUS
16
15-3/4
JUL-Z37G390DUS
18
17-11/16
JUL-Z37G440DUS
20
19-11/16
JUL-Z37G490DUS
22
21-5/8
JUL-Z37G540DUS
24
23-5/8
JUL-ZRG.1046ZSW
Silk white
JUL-ZRG.1046ZTB
Terra black
JUL-ZRG.1046ZNI
Nickel
Unit # 3468293
Gray
CENTER ADAPTER SETS
Handle w/ Latch
TANDEMBOX Intivo
Gray
Unit # 3468296
FRONT FIXING BRACKET SETS
TANDEMBOX Intivo
For “M” height wrap-around sink drawers. Includes left
and right adapters.
JUL-Z37G590DUS
26
25-9/16
Drawer Caps, Handles, Brackets, Rails & Adapters
No.
Finish
JUL-Z30N00026ZA
Gray
Unit # 3468288
DRAWER END CAPS
Unit # 3468299
COVER CAPS
BOXCOVER
TANDEMBOX Intivo
For “M” height interior roll-out drawers. Includes left
and right brackets with locking piece.
No.
Finish
For use with glass design elements in TANDEMBOX
Intivo installations. Includes (2) front and (2) rear end
caps.
No.
Finish
JUL-Z36L002GISW
Silk white
JUL-Z36L002G.I
JUL-ZIF80M0SW
Silk white
JUL-ZIF80M0TB
Terra black
JUL-ZIF80M0NI
Nickel
FRONT FIXING BRACKET SETS
Non-handed symmetrical design.
Note: Custom logo printing available.
No.
TANDEMBOX Intivo
JUL-ZAA.532C.BTSW
Silk white
JUL-ZAA.532C.BTTB
Terra black
Unit # 3468297
Stainless steel
Finish
JUL-ZAA.532C.BT
Copper
JUL-ZAA.5329.BT
Silver
Unit # 3468300
DRAWER FRONT PIECES
TANDEMBOX Intivo
Unit # 3468308
FRONT STABILIZATION BRACKETS
TANDEMBOX Intivo
For interior roll-out drawers. Length 40-13/16”; cut to
size.
No.
Finish
For “D” height interior roll-out drawers with design elements or BOXCAP. Includes left and right brackets with
bottom support.
No.
Finish
JUL-ZIF81D0SW
Silk white
JUL-Z31L1036ASW
Silk white
JUL-ZIF81D0TB
Terra black
JUL-Z31L1036ATB
Terra black
JUL-ZIF80D0NI
Nickel
JUL-Z31L1036ANI
Nickel
84
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
For stabilizing wide drawers or tall drawer fronts; reinforces connection between drawer front and bottom.
Install one per drawer; center on drawer bottom.
No.
Desc.
JUL-Z96.10E1
Front stabilization bracket
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Drawer Attachment & Bracket Sets
Unit # 3468292
Unit # 3468290
DRAWER OPENING/CLOSING
SYSTEMS
TANDEMBOX Intivo – SPACE CORNER
Sinks
REAR FIXING BRACKET SETS
SYNCROMOTION
Unit # 3468291
DRAWER ATTACHMENT SETS
JUL-Z30M Series
For use in SPACE CORNER drawer assemblies with
SYNCROMOTION. Includes left and right brackets.
No.
Finish
JUL-ZSF535EDSW
JUL-ZSF535ED
JUL-ZSF340EMSW
Terra black
JUL-Z30D000SL45NI
Decorative
Hardware
Silk white
JUL-Z30D000SL45TB
Nickel
JUL-Z30M000S45SW
Silk white
Silk white
JUL-Z30M000S45TB
Terra black
Gray
JUL-Z30M000S45NI
Nickel
Silk white
JUL-Z33M Series
Unit # 3468237
JUL-ZSF340EM
Gray
DRAWER BRACKET SETS
JUL-ZSF304EMNI
Nickel
SYNCROMOTION
Includes: SYNCRO front bracket, left and right corner
front pieces, (4) SYNCRO front fixing brackets, left and
right front fixing rollers, left and right triggers, gap template, (2) BLUMOTION 970 systems, and screws.
Drawer Attachment & Bracket Sets
No.
Finish
Unit# 3468250
JUL-Z33D0L00A6SW
Silk white
JUL-Z33D0L00A6
SPACE CORNER
JUL-Z33M0E0A6SW
Gray
Silk white
JUL-Z33M0E0A6
JUL-Z33M00E0A6
Gray
Storage &
Convenience
DRAWER BRACKET SETS
Unit # 3468318
Series ZSF340EM
Includes 2 each: corner rear fixing brackets, corner
front pieces, and drawer front support brackets.
No.
Finish
JUL-Z30D000SL45SW
Shelving
& Hardware
JUL-ZSF340 Series
JUL-Z33D Series
Screws &
Fasteners
JUL-Z30D Series
JUL-ZSF535 Series
Adhesives
& Caulk
Edgebanding
& Veneers
TANDEMBOX Intivo – SPACE CORNER
UNIVERSAL BRACKET SETS
No.
Color
For Drawer
Ht.
JUL-ZSF340EMGR
Gray
M
JUL-ZSF340EMNI
Nickel
M
JUL-ZSF345EDGR
Gray
D
JUL-ZSF345EDNI
Nickel
D
JUL-Z33D00E0A6
For use with SPACE CORNER drawer systems.
Includes SYNCRO front brackets, L/R corner front
piece (left/right), L/R front fixing roller, L/R trigger, gap
template, (2) BLUMOTION 970 drawer closers, (2) M5
x 25 screws and (3) nylon screws 4.8 x 30. Gray.
No. JUL-Z33M00E0A6. Includes (2) SYNCRO front
fixing brackets.
No. JUL-Z33D00E0A6. Includes (4) SYNCRO front fixing brackets.
For
No.
Drawer Ht.
JUL-Z33M00E0A6
M
JUL-Z33D00E0A6
D
Zinc-coated steel construction. Includes (4) brackets
and (6) #6 x 1/2” truss head screws.
No.
Desc.
JUL-2954000
Universal bracket set
85
Abrasives
Includes 2 each: corner rear fixing brackets, corner
front pieces and drawer front support brackets.
& Machines
Series ZSF345ED
Cabinet Locks
& Latches
Lighting
Wood
Products
TANDEMBOX Intivo
Drawer Drive Units, Opener & Adapter Sets
Unit # 3468259
Unit # 3468260
DRIVE UNITS
ADAPTER SETS
SERVO-DRIVE
SERVO-DRIVE
Unit # 3468262
ELECTRICAL COMPONENTS
SERVO-DRIVE
Features operating mode LED display, single/multiple
mode selector switch, adjustable power, and preattached lever arm extension for use with cabinets
wider than 12”. Release lever allows easy installation
and removal. Gray.
No.
Desc.
JUL-Z10NE05001
JUL-Z10A300001
No. JUL-Z10NE05001. For connection to switched
GFCI outlet; can power up to 20 drive units. 100V to
240V input; 24V DC output. Includes 6-ft. cable. UL
certified. Requires 3-prong power cord (not included).
No. JUL-Z10NE05010. Includes 3-prong power cord,
wall mount bracket, power supply, 19-ft. universal
cable, (3) cable end protectors, cable connector, (10)
cable clips and instructions.
Drive unit
Drawer Drive Units, Opener & Adapter Sets
JUL-Z10D01E0
JUL-Z10D1EA
For use with vertical aluminum profiles.
No.
Desc.
JUL-Z10D01E0
Top & bottom
JUL-Z10D1EA
Back & bottom w/ cover cap
Unit # 3468266
Unit # 3468263
DRAWER OPENER SETS
HORIZONTAL PROFILES
Waste/Recycling Bin – SERVO-DRIVE
SERVO-DRIVE
Power Supplies
No.
Desc.
JUL-Z10NE05001
Power supply only
JUL-Z10NE05010
Power supply set
JUL-Z10NG100
JUL-Z10M200U
JUL-Z10V100E
For use with TANDEM or TANDEMBOX drawer systems. Includes: power supply, wall mounting bracket,
three-prong power cord, drive unit, bottom bracket with
screws, (4) distance bumpers, (4) cable clips, boring
templates and technical information.
No.
Desc.
JUL-Z10NE05015
Waste/recycling bin set
For use with TANDEM plus BLUMOTION or TANDEMBOX drawer systems. Aluminum construction. Can be
cut to size.
Lgth.
No.
In.
JUL-Z10T1143B
45
Unit # 3468271
ADAPTER SETS
SERVO-DRIVE
JUL-Z10K0009
No. JUL-Z10V100E. Includes cable connector and (2)
end protectors.
No. JUL-Z10K0009. Features adhesive back for
installation; can also be screwed on.
No. JUL-Z10K800AE. 26-ft. length. Includes (5) cable
end protectors.
Unit # 3468258
VERTICAL PROFILES
SERVO-DRIVE
Accessories
No.
Desc.
JUL-Z10NG100
Wall mount bracket
JUL-Z10M200U
Power cord w/ 3-prong plug
JUL-Z10V1000
Cable connector
JUL-Z10K0008
Cable end protector
JUL-Z10V100E
JUL-Z10K0009
JUL-Z10K800AE
For use with horizontal aluminum profiles in panel
applications. Includes left and right panel adapters,
profile adapter and installation template. Gray.
No.
Desc.
JUL-Z10D5210US
Horizontal panel adapter set
Unit # 3468264
ADAPTER SETS
Cable connector set
SERVO-DRIVE
Cable clip
Universal cable
JUL-Z10K008S
3-Ft. synchronization cable
JUL-Z10K120S
JUL-Z10K160S
JUL-Z10T720AB
JUL-Z10T1170A
For use with TANDEM plus BLUMOTION or TANDEMBOX drawer systems. Aluminum construction. Can be
cut to size.
Lgth.
No.
Desc.
In.
JUL-Z10T720AB
With cable
28-3/8*
JUL-Z10T1170A
Without cable
46
* Cable length 31”.
For use with horizontal aluminum profiles in face frame
applications. Includes left and right TANDEM adapters,
profile adapter, screws and instructions. Gray.
No.
Desc.
JUL-Z10D5800US Horizontal face frame adapter set
86
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3468268
Unit # 1729261
DISTANCE BUMPERS
POCKET DOOR SLIDES
SERVO-DRIVE
Press-In – SERVO-DRIVE
4x4
For dual drive units
HINGED DOOR SLIDES
Pocket Door Slides
Drawer Brackets, Bumpers & Door Slides
Unit # 3468265
TOP BRACKETS
Lgth.
In.
No.
SERVO-DRIVE
KNA-8091PEB12
12
KNA-8092PEB12
12
KNA-8091PEB13
13
KNA-8091PEB14
14
KNA-8091PEB15
15
KNA-8091PEB16
16
No.
Lgth.
In.
KNA-8092PEB16
16
KNA-8050PEZ12
12
KNA-8091PEB18
18
KNA-8050PEZ16
16
KNA-8092PEB18
18
KNA-8050PEZ20
20
KNA-8091PEB20
20
KNA-8050PEZ22
22
KNA-8092PEB20
20
KNA-8091PEB22
22
KNA-8092PEB22
22
KNA-8091PEB24
24
VIBRATION SENSORS
KNA-8092PEB24
24
SERVO-DRIVE
KNA-8091PEB26
26
KNA-8092PEB26
26
KNA-8091PEB28
28
KNA-8092PEB28
28
KNA-8091PEB30
30
KNA-8092PEB30
30
3/4 extension with 3/4” offset hinge. Light duty; for use
in “up and under” applications. Mounts to underside of
cabinet top. Features continuous piano hinge with permanently stacked pins, steel ball bearings with metal
retainer, and one-piece nonmarring roller. Anochrome
finish. 20-lb. load rating. 10 sets/box, polybagged with
screws and instructions.
JUL-Z10D6252
Top bracket w/ adapter
Unit # 1729343
POCKET DOOR SLIDES
Unit # 3468267
Cuts off power to drive units in event of earthquake,
preventing unintentional opening.
Note: Must be plugged into switched GFCI outlet.
No.
Desc.
JUL-Z10ZE000
For use in entertainment centers and home theater
cabinets. Features 35mm hinges with premounted
bases, and precision steel ball bearing slides. Follower
strip bracket allows follower strip to be installed after
slide installation. 30-lb. class; holds doors up to 42” H
x 24” W. Meets or exceeds ANSI performance standards. Ebony black finish. Packaged 1 set with mounting hardware in poly pack.
Vibration sensor
No.
Lgth.
In.
Unit # 3468261
DISTANCE BUMPERS
8072PEZEB12
12
Drawer Front – SERVO-DRIVE
8072PEZEB14
14
8072PEZEB16
16
8070PEZEB18
18
8072PEZEB18
18
8070PEZEB20
20
8072PEZEB20
20
8072PEZEB22
22
8072PEZEB24
24
8071PEZEB12*
12
Two bumpers required for drawer heights of 12” or
less; four bumpers required for drawer heights of more
than 12”.
Dia.
Travel
No.
mm
In.
JUL-9930531
5
Pocket Door Shafts
No.
Lgth.
In.
KNA-8092SBEB36
36
KNA-8092SBEB48
48
KNA-8092SBEB72
72
department has the
answers you need!
* 3/4 extension.
1/8
Surfacing
Products
Abrasives
For use with TANDEM plus BLUMOTION or TANDEMBOX drawer systems. Includes adapter.
No.
Desc.
Decorative
Hardware
For single drive unit
JUL-Z10D7201
JUL-Z10D7101
Shelving
& Hardware
For use with TANDEM plus BLUMOTION or TANDEMBOX drawer systems. Includes 31-1/2” universal cable.
No.
Desc.
Screws &
Fasteners
JUL-Z10D7201
Storage &
Convenience
For use in entertainment centers with max. door size of
72” H x 26” W. Mounts to cabinet side. Features rack
and pinion system to eliminate door sag, slide rack
indexing system and steel ball bearings with metal
retainer. 75-lb. load rating. Black finish. 6 sets per box.
Series 8091. For use with full overlay hinge kit only.
Does not include hinge or base.
Series 8092. Includes attached hinge base; hinges
must be ordered separately.
Unit # 1729258
JUL-Z10D7101
Wood
Products
1/8
Lighting
JUL-9931630
Cabinet Locks
& Latches
For use in panel applications. Attaches to cabinet
using two 5mm press-in
dowels.
Travel
No.
In.
Adhesives
& Caulk
Edgebanding
& Veneers
BOTTOM BRACKETS
87
& Machines
Unit # 3468273
Sinks
Drawer Brackets, Bumpers & Door Slides
Pivot Door Slides, Pocket Door Hinge Kits & Rollers
Accessories
No.
Desc.
Hinge Kits – 2 per Bag
KNA-8080HKEZFEB
3/4” Free swing door - 35mm cup
PIVOT DOOR SLIDES
KNA-8080HKEZLEB
3/4” Overlay door - 40mm cup
Medium-Duty
KNA-8080HKEZSEB
3/4” Door - 35mm cup
Unit # 1729260
KNA-8085HKEZTEB
1” Door - 40mm cup
KNA-8086HKEZXEB
1-1/4” Door - 40mm cup
KNA-8085HKEZT
KNA-8086HKEZX
1” Door - 40mm cup
Hinge Packs – 40 Hinges per Carton
KNA-8080HPEZFEB
3/4” Free swing door - 35mm cup
KNA-8080HPEZLEB
3/4” Overlay door - 40mm cup
KNA-8080HPEZSEB
3/4” Door - 35mm cup
KNA-8086HPEZX
Guide Roller
Mounts to side of case for pocket doors, underside of top for receding doors. Features single movement on precision steel ball bearings, oversized “L-shaped” follower-strip mounting plate, attached hinge base with self-closing 3-way adjustable
clip-on type door hinge, cushioned stops, door hold-out feature, and corner rollers.
30 lb. class.
KNA-8080 Series. Packed with 35mm self-closing hinge.
KNA-8081 Series. Packed without hinge or base.
KNA-8082 Series. Packed with attached hinge base.
Packaging Options
Polybagged (P): One set with hinges, rollers and instructions; 10 sets per carton.
Quantity Pack (Q): 20 left-hand and 20 right-hand members, with hinges, rollers
and instructions.
KNA-8080-96B
Guide roller w/ screw
Pivot Door Slides, Pocket Door Hinge Kits & Rollers
Unit # 1729344
POCKET DOOR HINGE KITS
Full Overlay
Door Slides
No.
Color
Polybagged
Size
In.
KNA-8080PEZ12
Anochrome
KNA-8080PEZEB12
Ebony Black
12
12
KNA-8080PEZ14
Anochrome
14
KNA-8080PEZ16
Anochrome
16
KNA-8080PEZ18
Anochrome
18
KNA-8080PEZ20
Anochrome
20
Mounts directly to 8091 series slides. Accommodates doors up to 75 lb., 72” H and
3/4” thick. Includes (2) brackets, (4) overlay hinges, (4) hinge bases, (4) cover caps,
(4) protective felt pads, and mounting hardware.
For
No.
Hinge Type
KNA-8080QEZ20
Anochrome
20
KNA-8091FULL3/4M
KNA-8080PEZEB20
Ebony Black
20
KNA-8080PEZ22
Anochrome
22
KNA-8080PEZEB22
Ebony Black
22
Unit # 1729266
CASSETTE ROLLERS
KNA-8080PEZ24
Anochrome
KNA-8080PEZEB24
Ebony Black
24
KNA-8081PEZ12
Anochrome
12
KNA-8081PEZEB12
Ebony Black
12
KNA-8081PEZ14
Anochrome
14
KNA-8081PEZ16
Anochrome
16
KNA-8081PEZ18
Anochrome
18
KNA-8081PEZ22
Anochrome
22
KNA-8081PEZEB22
Ebony Black
22
KNA-8082PEZ14
Anochrome
14
KNA-8082PEZ16
Anochrome
16
KNA-8082PEZ18
Anochrome
18
For use with all pocket doors; provides additional support for raised panel doors and
cushions horizontal door rail as it retracts. Installs on side cabinet wall.
No.
Desc.
KNA-8082PEZ20
Anochrome
20
KNA-8090P CR
KNA-8082PEZ24
Anochrome
Quantity Pack
24
KNA-8081QEZ12
Anochrome
12
KNA-8081QEZ14
Anochrome
14
KNA-8081QEZ16
Anochrome
16
KNA-8081QEZ18
Anochrome
18
KNA-8081QEZ20
Anochrome
20
KNA-8081QEZ22
Anochrome
22
KNA-8081QEZ24
Anochrome
24
88
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
24
Mepla
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Raised panel cassette roller
We appreciate
your business!
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Inset Door Hardware & Electric Trim Rings
89
& Machines
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Surfacing
Products
Inset Door Hardware & Electric Trim Rings
Desk Drawers & Keyboard Slides, Trays & Drawers
Unit # 3013011
PENCIL DRAWERS
Unit # 1729262
Narrow
Includes ball bearing slides.
No.
Color
CPF89305
Black
Desk Drawers & Keyboard Slides, Trays & Drawers
Unit # 3013006
DESK DRAWERS
KEYBOARD/MOUSE TRAYS
Variable Height
Adjustable
3/4 extension. For light-duty applications. Cabinet
members mount to underside of desk or tabletop;
drawer members mount to drawer sides. Mounting
brackets allow drop adjustment from 2-11/32” to
3-11/16” in 7/32” increments; can be reversed for
inboard or outboard mounting. Anti-rebounding design.
75-lb. load rating.
Polybagged. Includes 10 sets with screws and instructions.
Quantity Pack. Includes 20 left-hand cabinet members, 20 right-hand cabinet members, and 40 drawer
members.
No.
CPF89777
Unit # 1729188
KEYBOARD SLIDES
Color
Polybagged
Side mounted. Includes adjustable PVC wrist rest.
Seven-position, height-adjustable mounting brackets.
Friction latch locks tray in open position. Mouse tray
opens to either side. Tray measures 21-3/4” x 18”.
75-lb. capacity. Ball bearing slides. Black finish.
Lgth.
Ht.
No.
In.
In.
KNA-5710SPBLK
18
2-11/32 to 4-1/4
Lgth.
In.
Unit # 1729282
KNA-8150P14
Anochrome
14
KNA-8150P16
Anochrome
16
KNA-8150PEB16
Ebony black
16
KNA-8150P18
Anochrome
18
KNA-8150P20
Anochrome
20
KNA-8157P14
Anochrome
14
KNA-8157P16
Anochrome
16
KNA-8157P18
Anochrome
Quantity Pack
18
KNA-8150Q16
Anochrome
16
KNA-8150Q18
Anochrome
18
KEYBOARD DRAWERS
KNA-KD-110
CPF89767
For holding pencils, pens, paper clips and other common desk drawer items. Drawer measures 22” W x
19.19” D. Centered finger tab for easy opening.
Ribbed back compartment holds items in place. Ball
bearing slides.
No.
Unit # 1729187
KEYBOARD TRAYS
KNA-KD-120
Adjustable
Desc.
CPF89777
Desk drawer
CPF89767
Desk drawer w/ lock
Unit # 3013012
For side mounting in inboard or outboard position.
Includes seven-position, height-adjustable mounting
brackets. Includes adjustable PVC wrist rest. Friction
latch locks tray in open position. Tray measures 21-3/
4” x 18”. 75-lb. capacity. Ball bearing slides. Black finish.
Lgth.
Ht.
No.
In.
In.
KEYBOARD TRAYS
KNA-5700SPBLK
Sliding tray features reversible mouse tray, contoured
wrist support and flip-up pencil tray. Includes mounting
brackets, slides and hardware.
No.
Color
CPF8923000100
90
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
18
Features steel ball bearing slides with lock-out, wraparound cushioned wrist rest, and 7-position height
adjustment (2.25” to 3.60”). Brackets mount outboard
for use under work surfaces 23” wide or wider; inboard
for use under work surfaces from 20.75” to 23”. Steel
tray measures 20” W x 10” D. Black textured finish.
75-lb. load rating.
No. KNA-KD-110. Includes ambidextrous 8” diameter
swiveling mouse tray with wire management.
No. KNA-KD-120. Includes ambidextrous 8” diameter
swiveling mouse tray with wire management, and 19”
injection-molded accessory tray with extended slides.
No.
Desc.
KNA-KD-110
Keyboard drawer w/ mouse tray
KNA-KD-120
Keyboard drawer w/ mouse &
accessory trays
2-11/32 to 3-11/16
Our pledge is
customer service.
Black
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Keyboard Shelves & Computer Holders
Unit # 1729370
KEYBOARD SHELVES
Sinks
Keynetix2™
Unit # 1729236
KEYBOARD SHELVES
KNA-SD-20
KNA-SD-23
KNA-SD-2
KNA-SD-24
No.
Desc.
KNA-SD-1
Keyboard tray
KNA-SD-2
Keyboard tray w/ 18” gel palm rest
KNA-SD-3
Keyboard tray w/ 18” gel palm rest & swivel mouse tray
Keyboard Shelves & Computer Holders
No.
Desc.
Tray
Width In.
KNA-SD-20
Comfort Plus keyboard tray w/ mouse platform
20
KNA-SD-23
Keyboard tray w/ mouse platform
20
KNA-SD-24
Keyboard/mouse tray
25
Shelving
& Hardware
Features 20” tray with non-skid keyboard pads, 9-3/4” height adjustment and ±15°
tilt with single knob control, 360° swivel and 18” track. Metal construction with black
powder coat finish.
Screws &
Fasteners
KNA-SD-3
Features 12” height adjustment and ±15° tilt adjustment with paddle controls, gel
palm rest, built-in cable management, and steel track with black powder-coat finish.
No. KNA-SD-20. Features Comfort Plus™ keyboard tray with non-skid pads, and
ambidextrous tilt/swivel mouse tray with integral mouse pad/palm rest.
No. KNA-SD-23. Features slim-profile keyboard platform with non-skid pads and
over-swivel mouse tray.
No. KNA-SD-24. Features phenolic tray with built-in ambidextrous mousing areas.
Unit # 1729232
KEYBOARD SHELVES
Keynetix™
Unit # 1729350
Wood
Products
KNA-SD-10
20
18
KNA-SD-14
25
25
No.
Track
Lgth. In.
For CPU
Dim. In.
HxW
Cap.
Lbs.
KNA-CPU-3
18
13.5 to 24 x 3.25 to 8
50
Abrasives
Palm Rest
Let ISC Surfaces
be the first stop for
all your product needs!
91
& Machines
Lgth. In.
Platform
Lighting
Stores CPU vertically beneath work surface. Features 13” of in/out adjustment, 360°
swivel capability and integrated handle. Adjusts without tools to accommodate most
CPU sizes. Black.
Cabinet Locks
& Latches
KNA-SD-14
Features 9-3/4” height adjustment and ±15° tilt adjustment with one-touch control,
gel palm rest, and steel track with black powder coat finish.
No. KNA-SD-10. Features Comfort Plus™ keyboard tray and ambidextrous tilt/
swivel mouse tray with integral mouse pad/palm rest and cable management system.
No. KNA-SD-14. Features one-piece in-line design with dual mousing areas. Slim
profile allows maximum leg room.
No.
Storage &
Convenience
COMPUTER HOLDERS
KNA-SD-10
Decorative
Hardware
KNA-SD-1
Adhesives
& Caulk
Edgebanding
& Veneers
Optimal™
Hanging File Rails & TV Swivels
NOTES
Unit # 3013007
HANGING FILE RAILS
Converts file drawers from letter to legal folder size.
Clip-on installation; fits drawers 1/2” to 5/8” thick. Black.
Crossbar not included.
Hanging File Rails
No.
Dim. In.
WxL
CPF32500
1/2 x 98-1/2
CPF580FR
5/8 x 98-1/2
Accessories
No.
Desc.
CPF900K
File bar clips, black
Hanging File Rails & TV Swivels
Unit # 1729373
TV SWIVELS
Heavy-Duty
KNA-1388BLK
KNA-1389BLK
Designed for computer and entertainment center applications. Features 7/8” precision ball bearing full extension, 360° swivel, and 4 large wheels for wide swivel
action. 17-5/16” W x 2-7/16” H. 15-1/2” slide length; 14”
slide travel. 225 lb. class. Includes mounting hardware
and instructions.
Plate
Plate Diagonal
No.
Dim. In.
Dim. In.
KNA-1388BLK
16 x 16
22
KNA-1389BLK
16 x 25-1/2
30-3/8
92
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3468219
ANGLE RESTRICTION CLIPS
CLIP TOP HINGES
Sinks
120° – Straight Arm
Hinges & Lift Systems
Surfacing
Products
Clip Top Hinges
Unit # 3468057B
Unit # 3468066
CLIP TOP HINGES
Restriction
Angle Deg.
No.
JUL-741103
86
For frame or frameless cabinets with aluminum doors.
Nickel-plated metal construction with 3-dimensional
adjustment. Full overlay.
Unit # 3468060
No.
CLIP TOP HINGES
JUL-72T550ATL
Clip Top Hinges
120°
Desc.
Mounting
Type
Free swinging
Screw-on
Unit # 3468065
Decorative
Hardware
Black nylon construction. Installs without tools. Limits
opening angle of CLIP TOP 107° hinges. Non-removable.
Adhesives
& Caulk
Edgebanding
& Veneers
107°
CLIP TOP HINGES
120°+
Shelving
& Hardware
Straight Arm
Screws &
Fasteners
Straight Arm
Storage &
Convenience
Half-Cranked
Desc.
Straight Arm – Full Overlay
JUL-75T1550
74T1550TL
JUL-75T1580
JUL-74T1580TL
Self-closing
Free-swinging
Screw-on
Screw-on
Self-closing
Press-in
Free-swinging
Press-in
JUL-75T1590B
Self-closing
Inserta
Half-Cranked (9.5mm) – Half Overlay
JUL-75T1650
Self-closing
Screw-on
JUL-75T1680
Self-closing
Press-In
JUL-75T1690B
Self-closing
Full-Cranked (18mm) – Inset
JUL-75T1750
Self-closing
Inserta
No.
Desc.
Mounting
Type
JUL-70T5550TL
Free-swinging
Screw-on
JUL-70T5580TL
Free-swinging
Press-in
JUL-70T5590BTL
Free-swinging
Inserta
JUL-73T5580
Self-closing
Press-in
JUL-71T5550
Self-closing
Screw-on
JUL-73T558E
Self-closing
Expando
JUL-71T558E
Self-closing
Expando
JUL-72T5580TL
JUL-71T5580
Self-closing
Press-in
JUL-71T5590B
Self-closing
Inserta
JUL-70T5650TL
Free-swinging
Screw-on
JUL-70T5680TL
Free-swinging
Press-in
JUL-70T5690TL
Free-swinging
Inserta
Screw-on
JUL-71T5650
Self-closing
Screw-on
JUL-71T5680
Self-closing
Press-in
JUL-71T5690B
Self-closing
Inserta
JUL-75T1780
Self-closing
Press-in
JUL-75T1790B
Self-closing
Inserta
For frame and panel cabinet applications with overlays
up to 21mm. Nickel-plated metal construction. Straightarm design. 3-dimensional adjustment. 250 per box.
Mounting
No.
Desc.
Type
Full Overlay
Free-swinging
Half Overlay
Press-in
JUL-73T5550
Self-closing
Screw-on
JUL-73T5590B
Self-closing
Inserta
We appreciate
your business!
93
Lighting
No.
Mounting
Type
Cabinet Locks
& Latches
For frame and panel cabinet applications. Nickel-plated
metal construction with 3-dimensional adjustment.
Abrasives
Nickel-plated metal construction. 3-dimensional adjustment.
& Machines
Full-Cranked
Wood
Products
Half-Cranked
Clip Top Hinges
Unit # 3468069
Unit # 3468061
CLIP TOP HINGES
CLIP TOP HINGES
95° – Thick Door
Diagonal – 45°
Unit # 3468063
CLIP TOP HINGES
170°
Straight Arm
Straight Arm
For overlay or inside corner applications. Nickel-plated
metal construction with 3-dimensional adjustment.
Self-closing. 110° opening angle. 50 per box.
Mounting
No.
Type
JUL-79T5550
Screw-on
JUL-79T5580
Press-in
JUL-79T5590B
Inserta
Half-Cranked
Half-Cranked
Unit # 3468064
CLIP TOP HINGES
For frame and panel cabinet applications. Nickel-plated
metal construction. 3-dimensional adjustment. 125 per
box.
No.
Desc.
JUL-70T6540B
Mounting
Type
Bi-Fold Door – 60°
Full-Cranked
For doors 19 to 30mm thick. Nickel-plated metal construction with 3-dimensional adjustment.
No.
Desc.
Mounting
Type
Free-swinging
Inserta
JUL-71T6550
Self-closing
Screw-on
JUL-71T6580
Self-closing
Press-in
JUL-70T9580
Free swinging
Press-in
Press-in
JUL-71T9550
Self-closing
Screw-on
JUL-71T9580
Self-closing
Press-in
JUL-70T6580
Free-swinging
JUL-71T6540B
Self-closing
Inserta
JUL-71T6650
Self-closing
Screw-on
JUL-71T6680
Self-closing
Press-in
JUL-70T6680
JUL-71T6640B
Free-swinging
Press-in
Self-closing
Inserta
Unit # 3468057
JUL-71T9590B
Self-closing
Half-Cranked (9.5mm)
JUL-70T9650TL
JUL-71T9680
Free swinging
Screw-on
Self-closing
Press-in
Free-swinging
Screw-on
For use with flat-panel or profile doors. Nickel plated
metal construction. Features spiral-type in/out and side
adjustments. Self-closing.
Mounting
No.
Type
Self-closing
Screw-on
JUL-79T850010
Screw-on
JUL-79T853010
Press-in
JUL-71T9690B
Self-closing
Full-Cranked (18mm) – Inset
JUL-70T9750TL
JUL-71T9750
Inserta
Inserta
JUL-71T9780
Self-closing
Press-in
JUL-71T9790B
Self-closing
Inserta
Unit #3468061
Limits opening angle of CLIP TOP 170° hinges. Black
nylon construction. Installs without tools.
Restriction
No.
Angle Deg.
JUL-706103
94
Let ISC Surfaces
130
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Clip Top Hinges
Unit # 3468068
Unit # 3468158
CLIP TOP HINGES
Inserta
Glass Door – 94°
Sinks
CLIP TOP HINGES
Unit # 3468202
CLIP TOP HINGES
Edgebanding
& Veneers
Blind Corner – Overlay
JUL-79A9498T
Cover Cap
For frameless cabinets. Spiral-type depth adjustment
eliminates need for tightening and loosening screws.
Self-closing. Nickel plated.
Hinge Arm
Angle
Angle
No.
Type
Type
Deg.
JUL-79A9494BT
I
Positive
15
No.
Mounting
Type
For glass doors 4.5mm to 7mm thick. Features
3-dimensional adjustment. Self-closing. Includes fixing
screws.
Hinges
For
No.
Desc.
Door Type
JUL-79A9496BT
III
Positive
30
JUL-75T4100
Straight-arm
Overlay
JUL-79T995037
Screw-on
JUL-79A9498T
III
Positive
45
JUL-75T4200
Half-cranked
Twin overlay
JUL-79T998037
Press-in
JUL-79A9595T
I
Diagonal
20
JUL-75T4300
Full-cranked
Inset
JUL-79T999037
Inserta
JUL-79A9596BT
II
Diagonal
30
JUL-79A9698T
I
Diagonal
45
Nickel-plated metal construction. 95° opening angle. 3dimensional adjustment.
Cover Caps
No.
Unit # 3468201
Unit # 3468006
CLIP TOP HINGES
Color
D-Shaped
SPACER WEDGES
JUL-844120CR
Inset Blind Corner – 95°
Chrome
JUL-844120G
Gold
JUL-79A9698T
Shelving
& Hardware
JUL-79A9595T
Decorative
Hardware
Adhesives
& Caulk
Hinge
JUL-844140CR
For flush door applications. Nickel-plated metal construction. 3-dimensional adjustment. Self-closing.
Mounting
No.
Type
JUL-171A5010
2
Positive
JUL-171A5040
4
Positive
JUL-171A5070
7
Positive
JUL-79T9550
Screw-on
JUL-171A5500
1
Negative
JUL-79T9580
Press-in
CLIP TOP HINGES
Mini
Unit # 3468169
CLIP TOP HINGES
Inserta
Mini
For small doors or doors with small frames. Features
94° opening angle and +0.5 to -3.5mm side adjustment. 26mm cup depth. Self-closing. Screw-on.
Unit # 3468067
CLIP TOP HINGES
No.
Negative Angle
Desc.
JUL-71T0650
Half-cranked; partial overlay
JUL-71T0750
Full-cranked; inset
Cabinet Locks
& Latches
JUL-79T9590B
Unit # 3468203
Storage &
Convenience
Angle
Type
Wood
Products
Size
mm
Black
JUL-79A5493BT
-15
JUL-79A5582T
-25
JUL-79A5491T
-30
JUL-79A5490T
-45
For small doors or doors with small frames. Features
94° opening angle and +0.5 to -3.5mm side adjustment. Self-closing. Requires 26mm cup hole.
Mounting
No.
Desc.
Type
JUL-71T0550
Straight arm
Abrasives
JUL-79A5491T
For frameless cabinets. Spiral-type depth adjustment
eliminates need for tightening and loosening screws.
Self-closing. Nickel plated.
Angle
No.
Deg.
Quality Products
Quality People
Screw-on
Lighting
No.
Gold
JUL-844140S
95
& Machines
For changing angle of angled CLIP TOP hinges by 5°.
50 per box.
Chrome
JUL-844140G
Screws &
Fasteners
Round
Mounting & Adapter Plates
Unit #3468015
Unit #3468162
WING MOUNTING PLATES
CAM ADAPTER PLATES
Clip-On – One Piece
Face Frame
Mounting & Adapter Plates
Unit #3468163
WING MOUNTING PLATES
Clip-On – Two Piece
Nickel plated, die-cast zinc construction.
±2mm height adjustment.
Features
Ht.
mm
No.
#6 x 5/8” Wood screws
Nickel plated, die-cast zinc construction. Features
±3mm height adjustment and pre-mounted 5mm system screws.
Ht.
No.
mm
JUL-175L8100
0
JUL-175H7100
0
JUL-175L8130
3
JUL-175H7130
3
JUL-175L8190
9
JUL-175H7190
9
#7 x 5/8” Wood Screws or System Screws
JUL-175H9100
0
JUL-175H9130
3
JUL-175H9160
6
JUL-175H9190
9
JUL-175H919022
18
Nickel-plated construction. ±2mm cam height adjustment. Requires #7 x 3/4” wood screws for mounting
(not included).
No. JUL-175H6000. Not for use with INSERTA
hinges.
Ht.
No.
Desc.
mm
JUL-175H6000
Center mount
JUL-175H6030
Center mount
0
3
JUL-175H6040
Center mount
4.5
JUL-175H6060
Center mount
6
JUL-175H6600
Off-center mount
0
Unit # 3468282
HINGE MOUNTING PLATES
Unit# 3468022
CAM ADAPTER PLATES
In-Line – CLIP
Inset Face Frame
JUL-175H5400
Unit #3468021
CAM MOUNTING PLATES
Clip-On
JUL-177H5400E & 5430E
Die-cast nickel zinc construction. 22mm setback,
±2mm cam height adjustment.
JUL-173H7100/7130
JUL-174H7100E/7130E
Size
mm
Mounting
Type
JUL-175H5400
0
Screw-on
JUL-175H5400E
0
Expando
JUL-175H5430E
3
Expando
No.
Nickel-plated, die-cast zinc construction. For use with
half-cranked hinges. Requires no buildup behind face
frame; can be used on frames with applied bead
moulding.
Note: For use with half-cranked hinges only.
No.
Ht.
mm
Mounting
Type
JUL-175H503021
3
#8 x 3/4” Truss head screws
Unit #3468014
JUL-174H7100I/7130I
ADAPTER PLATES
Nickel-plated steel construction. Features ±2mm cam
height adjustment.
Ht.
Mounting
No.
mm
Type
Face Frame
needs!
JUL-173H7100
0
JUL-173H7130
3
JUL-173L6100
0
JUL-173L6130
3
JUL-173H9100
0
JUL-173H9130
3
JUL-173L8100
0
668.1450.EH Screws
JUL-173L8130
3
668.1450.EH Screws
JUL-174E610Z
0
EXPANDO dowels
No.
JUL-174E610001
0
EXPANDO dowels
JUL-174E613001
3
EXPANDO dowels
JUL-174H710ZE
0
JUL-174H7100E
JUL-175L660022
JUL-175L660024
Nickel-plated, die-cast zinc construction. ±2mm height
adjustment. Requires #7 x 3/4” wood screws for
mounting.
No. JUL-175L660024. For use with 170” and zero-protrusion hinges in face frame applications.
Desc.
Ht.
mm
JUL-175L603021
Center mount
3
JUL-175L660022
Off-center mount
0
EXPANDO dowels
JUL-175L660024
Off-center mount
0
0
EXPANDO dowels
JUL-175L663022
Off-center mount
3
JUL-174H7130E
3
EXPANDO dowels
JUL-175L666022
Off-center mount
6
JUL-174H7100I
0
INSERTA dowels
JUL-174H7130I
3
INSERTA dowels
96
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Cover Caps, Door Closing Systems & Hinges
Unit # 3468204
Die-cast zinc construction. For wraparound, edge or
face mounting. Features 1/2” cup depth, ±9/64” height
adjustment and -1/8” side adjustment. 250 per box.
Mounting
No.
Type
Unit # 3468056
HINGE COVER CAPS
CLIP TOP
JUL-333600NI
Screw-on
JUL-333630NI
Press-in
Edgebanding
& Veneers
Two Piece – 110° – COMPACT
Sinks
HINGES
Unit # 3468228
CLIP TOP
Nickel-plated steel construction. For use with screw-on,
press-in or EXPANDO hinge cups for 107°, 120°, thick
door or blind corner CLIP top hinges.
No.
Desc.
JUL-70T1504
Hinge cover cap
Unit # 3468126
DOOR CLOSING SYSTEMS
BLUMOTION 973A
JUL-973A6000
JUL-973A050001
JUL-973A7680
Nickel plated steel construction. Attaches to existing Blum Euro-style hinges. Automatically adjusts to closing force of door; overload safety system protects hinge and
closing mechanism from damage in case of excessive force.
For
Pkg.
No.
Hinge Type
Qty.
JUL-973A050001
Straight-arm
500
JUL-973A0600
Half-cranked
50
JUL-973A0700
Full-cranked
50
JUL-973A6000
Wide-angle, straight-arm, half-cranked or zero-protrusion 25
JUL-973A7360
Angled, +30° II App.
–
JUL-973A7480
Angled, +45° I App.
–
JUL-973A7680
Angled, +45° II App.
–
JUL-38N355C08
JUL-38N355CE08
JUL-38N355C10
JUL-38N355C12
JUL-38N358C06
Screw-on
Screw-on
Screw-on
Screw-on
Press-in
JUL-38N358C07
JUL-38N358C08
7/16
1/2
105
105
Press-in
Press-in
JUL-38N358CE08
JUL-38N358C10
1/2
5/8
105
105
Press-in
Press-in
JUL-38N358C12
JUL-383550E08
JUL-383580E08
JUL-38358008
3/4
1/2
1/2
1/2
105
105
105
105
Press-in
Screw-on
Screw-on
Screw-on
1
107
107
107
107
107
107
107
107
Screw-on
Press-in
Press-in
Press-in
Screw-on
Press-in
Press-in
Press-in
110
110
110
110
110
110
110
110
110
Screw-on
Screw-on
Screw-on
Press-in
Press-in
Press-in
Press-in
Press-in
Press-in
JUL-38C355C16
JUL-38C355C20
JUL-38C355C21
JUL-38C355C22
JUL-38C355C24
JUL-38C358C16
JUL-38C358C24
JUL-38C358C25
JUL-39C355C20
JUL-39C355C21
JUL-39C355C22
JUL-39C358C16
JUL-39C358C20
JUL-39C358C21
JUL-39C358C22
JUL-39C358C24
JUL-39C358C25
1-1/4
1-5/16
1-3/8
1-1/2
1
1-1/2
1-9/16
1/2” Cup Depth
1-1/4
1-5/16
1-3/8
1
1-1/4
1-5/16
1-3/8
1-1/2
1-9/16
Cover Caps
No.
Desc.
JUL-38N3508
Stainless steel cover caps
97
Shelving
& Hardware
HINGE CUP COVER CAPS
Desc.
Screws &
Fasteners
No.
Unit # 3468135
Hinges
Overlay
Open.
In.
Angle Deg.
7/16” Cup Depth
1/2
105
1/2
105
5/8
105
3/4
105
3/8
105
Storage &
Convenience
JUL-90M2103
Straight arm 100°, 107°, 120°/120°+, Bi-fold and thick door
JUL-90M2203
Straight arm angled, mini and glass door
JUL-94M3203
Cranked arm 100°, 107°, 120°/120°+, Bi-fold and thick door
Cover Caps, Door Closing Systems & Hinges
Nickel-plated steel construction. Wraparound mount.
Features ±1/8” height adjustment, ±1/16” side adjustment and +3/32”/-1/32” cam depth adjustment.
Nos. JUL-38N355CE08 & JUL-38N358CE08. Edge
mount.
JUL-383 Series. Self-closing.
Wood
Products
Steel
Straight arm 100°, 107°, 120°/120°+, Bi-fold and thick door
Cranked arm 100°, 107°, 120°/120°+, Bi-fold and thick door
170° and zero-protrusion, black
170° and zero-protrusion, nickel
Nylon
JUL-701503
JUL-701663
JUL-806107
JUL-806507
Lighting
One Piece – COMPACT
Cabinet Locks
& Latches
HINGES
For Hinge
Type
No.
1/32
Unit # 3468037
JUL-90M2103
Abrasives
JUL-363515
JUL-806507
Decorative
Hardware
Zinc coated steel construction. For use with Series
38 hinges. Stackable.
Size
No.
In.
& Machines
JUL-701663
Adhesives
& Caulk
DISTANCE SPACERS
JUL-701503
Hinge Mounting Plates & Door Closing Systems
Unit # 3468180
BLUMOTION 971A
Unit #3468003
Edge Mount – COMPACT
BLUMOTION Mechanism
Nickel-plated, die-cast zinc construction.
mounting.
Requires #6 x 5/8” wood screws for
For use with Blum COMPACT hinges. Die-cast zinc construction with nickel plated
finish. Installs anywhere on hinge side of cabinet. ±5mm adjustment accommodates
various door sizes and weights.
No. JUL-971A9709. Less than 1” overlay.
No. JUL-971A9700A1. Includes mechanism, partial overlay spacer and screws.
Can be used for all COMPACT overlays.
No.
Overlay
In.
JUL-130110024NI
1/4
JUL-971A9700
JUL-130110023NI
1/2
JUL-971A9709
JUL-130110026NI
5/8
JUL-971A9700A1
JUL-130110022NI
3/4
JUL-130111002NI
1
JUL-130112002NI
1-1/8
JUL-130113002NI
1-1/4
JUL-130114002NI*
1-3/8
JUL-130115002NI*
1-1/2
JUL-1301160NI*
1-5/8
Partial Overlay Spacer
No.
Desc.
BLUMOTION mechanism
Partial overlay spacer
BLUMOTION polybag set
Unit # 3468073A
Unit# 3468176
BLUMOTION
* Requires additional mounting screw for stability.
Hinge Mounting Plates & Door Closing Systems
Unit #3468164
Face Mount – COMPACT
Nickel-plated, die-cast zinc construction. Requires #6 x 5/8” wood
screws for mounting.
Overlay
In.
No.
JUL-130214002NI
1-3/8
Provides smooth, silent closing action regardless of closing force; automatically
adjusts resistance to prevent door from slamming. Nylon construction. Requires
adapter plate (not included) for inset, inset angled and mitered angled applications.
May be installed in hole bored in top or bottom panel on hinge side of cabinet. Dust
gray color. 50 per pkg.
No.
Installation
JUL-970A1002
Top or bottom panel
Unit # 3468127
Unit # 3468074
ADAPTER PLATES
BLUMOTION 971A
BLUMOTION
JUL-971A0500
JUL-971A05E0
JUL-971A0700
JUL-9705201
Die-cast zinc construction with nickel plated finish. Installs onto side panel using
Blum straight arm hinge with 0mm or 3mm mounting plate; automatically adjusts to
closing force of door. Adjustable to accommodate various door sizes and weights.
32mm hole spacing. Pkg. Qty. 25.
Wing Plate. 37mm setback.
Face Frame Adapter Plate. 9.5mm center mount.
For Door
Mounting
No.
Size mm
Type
Wing Plate
Desc.
Mounting
Type
JUL-9705201
In-line adapter; two-piece
Screw-on
JUL-9705231
In-line adapter, two-piece
Press-in
37/32mm adapter
Preattached EXPANDO screws
Face frame adapter
Screw-on
JUL-971A0500
0
#6 Wood screw
JUL-971A2500
3
#6 Wood screw
JUL-9705701
JUL-971A05E0
0
5mm Expando dowel
3
Face Frame Adapter Plate
5mm Expando dowel
JUL-971A0700
0
#6 Wood screw
JUL-971A2700
3
#6 Wood screw
98
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
JUL-9705701
No.
JUL-97055E1
JUL-971A25E0
JUL-97055E1
For use with BLUMOTION 970 and 970A door closing systems. Die-cast zinc construction.
Screw-on. Requires (2) #6 x 5/8” wood screws for mounting.
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3468317
Unit # 4031001
CLIP-ON HINGES
TIP-ON
Full Overlay
Unit # 4031002
Desc.
H633ACL
H634ACL
w/ Dowels
CLK0
0
3/4
CLK2
2
5/8
120°
Decorative
Hardware
No dowels
For frameless cabinets. Steel construction.
Size
Overlay
No.
mm
In.
110°
Unit # 4031009
HCAM659ACL
Cam adjustment, w/ dowels
JUL-95515E1
JUL-9551501
CLIP-ON HINGE PLATES
Features +4.5 to -1.5mm door gap adjustment range
(pre-set to 2mm). Gray nylon construction.
No. JUL-9551201. Two-piece design.
Setback mm
Mounting
No.
Overlay
Inset*
Type
In-Line
JUL-9551201
20
Wing
22
Screw-on
JUL-9551501
37
39
Screw-on
JUL-95515E1
37
39
Expando
Unit # 4031008
Soft Close
CLIP-ON HINGES
Full Overlay – Soft Close
Features cam adjustment and 8mm dowels.
Open.
Angle. Deg.
No.
* Plus door thickness.
Adapter Plates, Door Closing Systems & Clip-On
Hinges
3311-8D-SC
110
For face frame applications. Steel construction.
Size
Overlay
No.
mm
In.
3303-SC
3
1/2
Unit # 4031005
Shelving
& Hardware
No.
Adhesives
& Caulk
Self-closing.
JUL-9551201
Surfacing
Products
Edgebanding
& Veneers
ADAPTER PLATES
Sinks
Adapter Plates, Door Closing Systems & Clip-On Hinges
Screws &
Fasteners
Unit # 4031003
Unit # 3468316
CLIP-ON HINGES
TIP-ON
FCL0, FCL3 & FCL6
FCLS3
JUL-955A1004
CAM3214
JUL-955A1004
Lighting
Unit # 4031004
Less than 48
Greater than 48
FCLS3
CLIP-ON HINGES
FCL3T
For face frame applications.
Size
No.
mm
Steel Construction
3
Die-Cast Construction
Full Overlay – LA Pattern
Overlay
In.
1/2
FCL0
0
5/8
FCL3
3
1/2
FCL6
FCL3T
6
Die-Cast Construction w/ Tabs
0
Cabinet Locks
& Latches
JUL-9551004
For Door
Ht. In.
w/ 8 mm Dowels
3/8
Self-closing. Features expandable dowels.
No.
3214-8DE
Open.
Angle Deg.
120
1/2
Abrasives
No.
No dowels
CAM3214-8D
For use with free-swinging Euro style hinges in overlay
or inset applications. Can be installed by boring into
panel or with adjustable adapter plate. Gray nylon construction. Includes self-adhesive screw-on catch plates
and screw.
99
& Machines
JUL-9551004
Self-closing. Features 120° opening and cam adjustment.
No.
Desc.
Wood
Products
Storage &
Convenience
Full Overlay – LA Pattern
Clip-On Hinge Plates & Self-Closing Hinges
Unit # 4031006
Unit # 4030008
Frameless – LA Pattern
Includes Euro screws.
3100S
SELF-CLOSING HINGES
Face Mount
Full Wrap
Features 0.065” steel construction with plated pins.
Automatically closes doors within 30° of cabinet front;
holds closed without need for separate catch. Holds
doors open when more than 30° from cabinet front.
Frame wing measures 2.756” W. 3-hole door wing
design. 3/8” inset.
No.
Finish
For 3/4” face frame applications. Features simulated 5knuckle design with plated bullet-style pin and 0.065”
steel construction. Automatically closes doors within
30° of cabinet front; holds closed without need for separate catch. Holds doors open when more than 30°
from cabinet front. Frame wing measures 2.756” W
and features single slotted hole. 1/2” overlay.
3103S
3100S
No.
Unit # 4030005
SELF-CLOSING HINGES
Size
mm
Overlay
In.
0
3/4
3103S
3
Clip-On Hinge Plates & Self-Closing Hinges
1/2
Unit # 4031007
H5922-BB-BW
Burnished brass
No.
Finish
H5922-BP-BW
Brass plated
H8455-BB-BNS
Burnished brass
H8455-BP-BW
Brass plated
Face Frame – LA Pattern
Unit # 4030009
SELF-CLOSING HINGES
Unit # 4030007
SELF-CLOSING HINGES
Partial Wrap
Full Wrap
Steel Construction
No.
Size
mm
Steel Construction
Overlay
In.
3200F-BS
0
5/8
3203F-BS
3
1/2
3206F-BS
6
3/8
3200F-B
0
5/8
3203F-B
3
1/2
3206F-B
6
3/8
Frame wing measures 2.26” W. Frame and door wings
feature dual slotted holes. 1/2” overlay.
No.
Finish
H7442-BB-BNS
Burnished brass
H7442-BP-BNS
Brass plated
No.
Finish
H6442-BB-BNS
Burnished brass
H6442-BP-BNS
Brass plated
Unit # 4030010
Unit # 4031011
SELF-CLOSING HINGES
Variable Overlay – Flush Mount
SELF-CLOSING HINGES
Features simulated 5knuckle design with
plated bullet-style pin
and 0.065” steel construction. Automatically
closes doors within 30°
of cabinet front; holds
closed without need for
separate catch. Holds
doors open when more
than 30° from cabinet
front. Frame wing measures 2.756” W.
H9255 Series. Features 3-hole door wing design.
H9455 Series. Features dual slotted holes.
No.
Finish
1/4” Overlay
Burnished brass
H9255-BP-BW
No.
Brass plated
H739PC
Chrome plated
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Brass plated
1/2” Overlay
Finish
H739BP
Unit # 4030012
SELF-CLOSING HINGES
Partial Wrap
H9255-BB-BW
100
For 3/4” face frame applications. Features 0.065” steel
construction with plated pins. Automatically closes
doors within 30° of cabinet front; holds closed without
need for separate catch. Holds doors open when more
than 30° from cabinet front. Frame wing measures
2.26” W and features single slotted hole. Door wing
features dual slotted holes. 1/2” overlay.
Single Demountable – Partial Wrap
Frame wing measures 2.26” W and features dual slotted holes. 3/8” inset.
No.
Finish
Burnished brass
Brass plated
H9455-BB-BW
Burnished brass
H1974-BB-BNS
H9455-BP-BW
Brass plated
H1974-BP-BNS
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
Self-Closing, Institutional & Sink Front Tray Hinges
Unit # 4030003
Unit # 4030006
1/4” Overlay
1/4” Overlay
H1271-BP-BNS
Brass plated
H1271-NI-BNS
Nickel plated
H1271-PC-BNS
Polished chrome
3/8” Overlay
H1371-BB-BNS
Brass plated
Brass plated
H1471-NI-BNS
Nickel plated
Black nickel
H2271-NI-BNS
Nickel plated
H2271-CP-BNS
Satin chrome
Burnished brass
H2371-BP-BNS
Brass plated
SINK FRONT TRAY HINGES
1/2” Overlay
H1471-PC-BNS
Polished chrome
Self-Closing, Institutional & Sink Front Tray Hinges
H2471-BB-BNS
Burnished brass
H2471-BP-BNS
Brass plated
H2471-NB-BNS
Black nickel
H2471-NI-BNS
Nickel plated
H2471-PC-BNS
Polished chrome
Unit # 4030004
H2471-WH-BNS
SELF-CLOSING HINGES
White
Unit # 4031010
Double Demountable – Partial Wrap
INSTITUTIONAL HINGES
H2974-BB-BNS
Burnished brass
H2974-BP-BNS
Brass plated
Measures 3/4” x 13/16”. Steel construction.
No.
Finish
H760BK
H760DC
H760PDC
Euro Hinges. For long sink front or cooktop panels in
framed or frameless cabients. Opening is adjustable
from 45° to 90°.
Self-Holdin® Hinges. Require less than 2mm clearance for countertop and no clearance below false front.
Extruded Tray Hinges. Hinge and end cap sets for
extruded trays. Include instructions and adhesive.
Individually polybagged.
No.
Finish
Qty.
Euro Hinges
REV-6552-ETH-10
Chrome
Self-Holdin® Hinges
10 pr.
REV-6552-95-0220
Stainless
Extruded Tray Hinges
40 pr.
REV-6552-97-11-4
White
40 pr.
REV-6552-97-15-4
Almond
40 pr.
Black powder coat
Dull chrome plated
Decorative
Hardware
Abrasives
Frame wing measures 2.26” W. 3/8” inset.
No.
Finish
Adhesives
& Caulk
Edgebanding
& Veneers
Unit # 3044116
White
H2371-BB-BNS
Burnished brass
H1471-BP-BNS
Brass plated
H2271-NB-BNS
Dull chrome
3/8” Overlay
1/2” Overlay
H1471-BB-BNS
Burnished brass
H2271-BP-BNS
H2271-WH-BNS
Burnished brass
H1371-BP-BNS
H2271-BB-BNS
Gray powder coat
H0074-26D-2
Shelving
& Hardware
Burnished brass
Black powder coat
H0074-GR2-2
Screws &
Fasteners
H1271-BB-BNS
Finish
Almond powder coat
H0074-BL2-2
No.
Finish
H0074-AL2-2
Dull chrome powder coat
MANUFACTURERS’
CATALOGS
We shall be glad to send manufacturers’ catalogs and other
available publications and data on request.
Storage &
Convenience
No.
Frame wing measures 2.26” W.
Features 5-knuckle design, rounded hospital-style corners and 32mm hole pattern. 13 ga. steel construction.
Measures 2-3/4” H. Adjustable for panel and door
thickness variations.
No.
Finish
Wood
Products
Double Demountable – Partial Wrap
Lighting
Single Demountable – Partial Wrap
Frame wing measures 2.26” W and features dual slotted holes.
INSTITUTIONAL HINGES
Cabinet Locks
& Latches
SELF-CLOSING HINGES
101
& Machines
Unit # 4030011
SELF-CLOSING HINGES
Continuous Hinges, Support Hinges & Door Lift Systems
Telescopic Arm Set – Fig. 4
Unit # 3059001
CONTINUOUS HINGES
Solid brass construction with standard hole pattern. Holes countersunk on 2” centers. Measures .040” thick x 72” L.
Open
Screw Hole
No.
Width In.
Size
Polished Nickel Finish
No.
Cabinet
Ht. In.
JUL-20F3200
18-7/8 to 22
JUL-20F3500
22 to 27
JUL-20F3800
JUL-20F3900
27 to 35
35 to 42
Hardware Kit Contents
Desc.
CLIP Top 120° free-swing hinge
Qty.
2
Fig.
No.
5
2
2
5
6
1 1/16 X 72
1-1/16
#4
Compact 33 free-swing hinge
CLIP Top bottom door hinge
1 1/2 X 72
1-1/2
#5
Compact mounting plate
2
7
1 1/4 X 72
1-1/4
#5
2
Polished Brass Finish
#5
Face frame adapter
Telescopic arm mounting plate
Installation screws for wood doors
4
2
–
7
8
–
#5
Installation screws for aluminum doors
–
–
2 X 72
1 1/2 X 72BR
1-1/2
Continuous Hinges, Support Hinges & Door Lift Systems
Hardware Kits
Unit # 1729181
No.
Desc.
JUL-78Z5530TA5
Hardware kit
Unit # 3468181
SUPPORT HINGES
Steel construction.
screws.
Anochrome finish.
12 pair per box.
Includes
DOOR LIFT SYSTEMS
AVENTOS HK
No.
Lgth.
In.
Desc.
KNA-472ANO6
Pair
6
KNA-472ANO10
Pair
10
KNA-472LANO10
Left-hand
10
KNA-472RANO10
Right-hand
10
Unit # 3468133
Features durable spring assembly and lever arm for lifting; integrated BLUMOTION
system for silent closing. Alignment and tension adjust to accommodate door size
and weight. 107° opening angle; designed to clear decorative mouldings.
Note: For use with wood or wide aluminum doors in face frame applications.
Optional parts required for use with narrow frame aluminum doors.
DOOR LIFT SYSTEMS
Wood/Wide Aluminum Doors – AVENTOS HF
System Contents
Qty.
Desc.
Fig.
Lift mechanism
2
a
Cover plates (right/left)
2
b
Cover caps
2
c
#7 x 35mm Wood screws
10
–
Mounting plates (optional)
2
d
Door Lift Systems
107° opening angle.
Power
Factor*
May be used with frameless or face framed cabinets.
No.
Determining power factor.
Power factor (PF) = cabinet height [inch] x door weight including handle [lb]
Lift Mechanism Set – Fig. 1, 2 & 3
Includes two lift mechanisms, cover plates, cover caps and wood screws.
No.
Power Factor
JUL-20F2200NA
85 to 230 (1 lift mech. required)
JUL-20F2300NA
231 to 470
JUL-20F2500NA
471 to 880
JUL-20F2500NA
780 to 1440
JUL-20F2800NA
1401 to 2300 (3 lift mech. required)
JUL-20K2300NA
43 to 99
JUL-20K2500NA
100 to 174
JUL-20K2700NA
175 to 349
JUL-20K2900NA
350 to 792
* Cabinet height (in.) x door weight (lbs.), including twice handle weight.
Hardware Kit
Hardware for wood or wide aluminum doors. Includes (2) arm assembly mounting
plates, installation screws for wood doors, and installation screws for aluminum
doors.
No.
Desc.
JUL-20S4200
102
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Hardware kit
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Door Lift Systems
Unit # 3468217
LIFT MECHANISM SETS
Unit# 3468176
Sinks
AVENTOS HL
Unit # 3468275
Edgebanding
& Veneers
AVENTOS HK
Restricts door opening angle to keep handle in reach and prevents
door from hitting overhead objects.
100
JUL-20K7011
75
Decorative
Hardware
JUL-20K7041
Adhesives
& Caulk
Angle
Deg.
No.
Door Lift Systems
b
Cover caps
2
c
Stabilizer rod cover caps
2
d
e
Stabilizer rod adapters
2
Arm assembly (right and left)
2
f
#7 x 1-3/8” wood screws
18
–
No.
JUL-20L2100NA
JUL-20L2300NA
Lift Mechanism Sets
Arm
For Cabinet
Assembly
Ht. In.
Wt. Lbs.
20L3200
11-13/16 to 13-3/4
2 to 8
20L3500
13-13/16 to 15-13/16
2 to 4
20L3200
11-13/16 to 13-3/4
8 to 13
20L3500
13-13/16 to 15-13/16
4 to 10
20L3800
15-3/4 to 21-5/8
3 to 6
JUL-20K2B00NA
19 to 39
JUL-20K2C00NA
40 to 85
20L3900
17-11/16 to 22-13/16
2 to 3
JUL-20K2E00NA
86 to 177
20L3200
11-13/16 to 13-3/4
13 to 25
20L3500
13-13/16 to 15-13/16
10 to 18
Desc.
20L3800
15-3/4 to 21-5/8
6 to 13
For wood or wide aluminum doors
20L3900
17-11/16 to 22-13/16
3 to 10
For narrow aluminum doors
20L3200
11-13/16 to 13-3/4
25 to 44
20L3500
13-13/16 to 15-13/16
18 to 28
20L3800
15-3/4 to 21-5/8
13 to 24
20L3900
17-11/16 to 22-13/16
10 to 19
20L3500
13-13/16 to 15-13/16
28 to 44
20L3800
15-3/4 to 21-5/8
24 to 44
20L3900
17-11/16 to 22-13/16
19 to 36
Mounting Plate Sets
No.
JUL-20K4A00
JUL-20K4A00A
JUL-20L2500NA
JUL-20L2700NA
we carry are listed
in this catalog.
please contact
your local branch
for assistance.
JUL-20L2900NA
No. JUL-20S4200. Hardware for wood or wide aluminum doors. Includes (2) arm
assembly mounting plates, installation screws for wood doors, and installation
screws for aluminum doors.
No. JUL-20Q1061UA. 41-7/8” cut-to-length stabilizer rod. Length should equal interior cabinet opening -120mm. Aluminum.
Accessories
No.
JUL-20S4200
Desc.
Fig.
Hardware set for wood or wide aluminum doors
h
Oval stabilizer rod
g
JUL-20Q1061UA
103
Shelving
& Hardware
2
Screws &
Fasteners
a
Cover plates (right and left)
Storage &
Convenience
Fig.
Wood
Products
2
Lighting
Lift Mechanism Sets
Includes (2) lift mechanisms, left/right cover plates, and (10) #7 x 1-3/8” wood
screws.
Power
No.
Factor
Qty.
Lift mechanisms
Cabinet Locks
& Latches
For use with small wall cabinets. 107° opening angle.
Note: when selecting lift mechanism, determine power factor by multiplying cabinet
height in inches by door weight in pounds (including twice handle weight).
Desc.
Abrasives
Contents
AVENTOS HK-S
& Machines
For use on face frame and panel cabinets and wood or wide frame aluminum doors.
Unit # 3468276
DOOR LIFT SYSTEMS
Lift Mechanisms, Cover Plates & Caps
For Cabinet
Ht. In.
No.
Unit # 3468176
LIFT MECHANISM SETS
Unit# 3468176
AVENTOS HS
Wt. Lbs.
JUL-20S1D00NA
21 to 26
6 to 13
JUL-20S1E00NA
21 to 26
11 to 26
JUL-20S1F00NA
21 to 26
21 to 41
JUL-20S1G00NA
27 to 31
7 to 15
JUL-20S1H00NA
27 to 31
13 to 28
JUL-20S1I00NA
27 to 31
23 to 47
No. JUL-20S4200. Hardware kit includes (2) lever arm mounting plates, installation
screws for wood doors, and installation screws for wide aluminum doors.
No. JUL-20S4F01. Includes left and right lever arm mounting plates with bracket,
installation screws for wood doors, and installation screws for wide aluminum doors.
No. JUL-20Q1061U. 41-3/4” cut-to-length stabilizer rod. Length should equal interior cabinet opening -120mm. Aluminum.
Accessories
No.
Desc.
For use on face frame and panel cabinets and wood or wide frame aluminum doors.
Optional parts required for use with narrow frame aluminum doors.
JUL-20S4200
Hardware kit for wood or wide aluminum doors
Contents
JUL-20S4F01
Mounting plate w/ bracket set
Desc.
Qty.
Fig.
Lift mechanisms
2
1
Cover plates (right and left)
2
2
JUL-20Q1061U
Stabilizer rod, round
Lift Mechanisms, Cover Plates & Caps
Symmetrical cover cap
2
3
Arm assembly (right and left)
2
4
LIFT MECHANISM COVER PLATES
AVENTOS
Stabilizer rod adapters
2
5
Stabilizer rod cover caps
2
6
#7 x 1-3/8” wood screws
10
–
Unit # 3468277
Selecting Required Lift Mechanism Set
JUL-20F8001NA
JUL-20S8001NA
Silk white color.
No.
Desc.
For AVENTOS HF
JUL-20F8001NAL
Left
JUL-20F8001NAR
Right
For AVENTOS HS
JUL-20S8001NAL
Left
JUL-20S8001NAR
Right
Unit # 3468278
LIFT MECHANISM COVER CAPS
AVENTOS
JUL-20F9001
JUL-20K9001
Silk white color.
Note: Two caps required per lift system.
No.
Lift Mechanism Sets
For Cabinet
Ht. In.
JUL-20S1A00NA
14 to 20
4 to 9
JUL-20S1B00NA
14 to 20
7 to 20
JUL-20S1C00NA
14 to 20
16 to 33
JUL-20S1C00US
14 to 20
16 to 33
104
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wt. Lbs.
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
No.
For Use
With
JUL-20F9001
AVENTOS HF, HS & HL
JUL-20K9001
AVENTOS HK
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Finish
Carton
Qty.
KNA-255BR36
5/8 x 36
Brass
100
KNA-255BR48
5/8 x 48
Brass
100
KNA-255BR60
5/8 x 60
Brass
100
KNA-255BR72
5/8 x 72
Brass
50
KNA-255BR96
5/8 x 96
Brass
50
KNA-255WH12
5/8 x 12
White
100
KNA-255WH18
5/8 x 18
White
100
KNA-255WH24
5/8 x 24
White
100
No.
Desc.
KNA-255WH30
5/8 x 30
White
100
KNA-237ZC
For Series 233 standards only
KNA-255WH36
5/8 x 36
White
100
KNA-239ZC
Shelf support
KNA-255WH48
5/8 x 48
White
100
KNA-255WH60
5/8 x 60
White
100
KNA-255WH72
5/8 x 72
White
50
KNA-255WH84
5/8 x 84
White
50
KNA-255WH96
5/8 x 96
White
50
KNA-255ZC12
5/8 x 12
Zinc
100
KNA-255ZC18
5/8 x 18
Zinc
100
KNA-255ZC24
5/8 x 24
Zinc
100
KNA-255ZC30
5/8 x 30
Zinc
100
KNA-255ZC36
5/8 x 36
Zinc
100
KNA-255ZC48
5/8 x 48
Zinc
100
KNA-255ZC60
5/8 x 60
Zinc
100
KNA-255ZC72
5/8 x 72
Zinc
50
KNA-255ZC84
5/8 x 84
Zinc
50
KNA-243ZC
KNA-255ZC96
5/8 x 96
Zinc
Shelf Standards, Supports & Brackets
50
KNA-243RZC
Zinc
100
KNA-233ZC18
13/16 x 18
Zinc
100
KNA-233ZC24
13/16 x 24
Zinc
100
KNA-233ZC30
13/16 x 30
Zinc
100
KNA-233ZC36
13/16 x 36
Zinc
100
KNA-233ZC48
13/16 x 48
Zinc
100
KNA-233ZC60
13/16 x 60
Zinc
100
KNA-233ZC72
13/16 x 72
Zinc
50
KNA-233ZC96
13/16 x 96
Zinc
50
KNA-255ALM12
5/8 x 12
Almond
100
STANDARD SUPPORTS
KNA-255ALM18
5/8 x 18
Almond
100
Pilaster
KNA-255ALM24
5/8 x 24
Almond
100
KNA-255ALM30
5/8 x 30
Almond
100
KNA-255ALM36
5/8 x 36
Almond
100
KNA-255ALM48
5/8 x 48
Almond
100
KNA-255ALM60
5/8 x 60
Almond
100
KNA-255ALM72
5/8 x 72
Almond
50
KNA-255ALM96
5/8 x 96
Almond
50
KNA-255ALWAL24
5/8 x 24
Walnut
100
KNA-255ALWAL48
5/8 x 48
Walnut
100
KNA-255ALWAL72
5/8 x 72
Walnut
50
KNA-255ALWAL96
5/8 x 96
Walnut
50
KNA-255AL12
5/8 x 12
Aluminum
100
KNA-255AL24
5/8 x 24
Aluminum
100
KNA-255AL36
5/8 x 36
Aluminum
100
KNA-255AL48
5/8 x 48
Aluminum
100
KNA-255AL60
5/8 x 60
Aluminum
100
KNA-255AL72
5/8 x 72
Aluminum
50
KNA-255AL96
5/8 x 96
Aluminum
KNA-255BRN18
5/8 x 18
KNA-255BRN24
5/8 x 24
KNA-255BRN30
KNA-255BRN36
Sinks
No.
Desc.
Crosspiece
Crosspiece w/ rubber cushion
Unit # 1729158
Unit # 1729127
Screws &
Fasteners
SLIDE MOUNTING BRACKETS
Storage &
Convenience
Side
For Series 233 and 255 pilaster standards. Steel construction.
Pkg.
No.
Finish
Qty.
Boxed
For use with 1260 and 1300 series drawer slides. Vertically adjustable. 1-5/8” clearance required. 4 brackets
per drawer slide set.
KNA-256ALNAT*
Natural
100
KNA-256WAL
Walnut
100
No.
Cap. Lbs.
Per Drawer
Pkg.
Qty.
KNA-1303
35
100
Zinc
100
KNA-256BR
Brass
100
KNA-256R
KNA-256SALM
Zinc/Rubber
100
Almond epoxy-coat
100
KNA-256SWH
White epoxy-coat
Bulk
100
50
KNA-256BZC
Zinc
1000
Brown
100
100
KNA-256BBLZC
Zinc
With Rubber Cushion
9000
Brown
5/8 x 30
Brown
100
KNA-256RZC
100
5/8 x 36
Brown
100
* Aluminum construction, fits 255 only.
KNA-255BRN48
5/8 x 48
Brown
100
KNA-255BRN60
5/8 x 60
Brown
100
KNA-255BRN72
5/8 x 72
Brown
50
KNA-255BRN96
5/8 x 96
Brown
50
KNA-255BR18
5/8 x 18
Brass
100
KNA-255BR24
5/8 x 24
Brass
100
Zinc
Unit # 1729157
Cabinet Locks
& Latches
KNA-256ZC
Adhesives
& Caulk
Decorative
Hardware
For use with 233 and 255 series standards. 3” length.
Zinc plated. 100 per carton.
13/16 x 12
Shelving
& Hardware
KNA-233ZC12
Wood
Products
19-ga. steel construction. For built-in shelving and
bookcases. Adjustable on 1/2” centers. Measures
3/16” H. Packed without nails.
Dim. In.
Carton
No.
WxL
Finish
Qty.
Unit # 1729151
SUPPORT BRACKETS
Lighting
255 Series
KNA-239ZC
KNA-237ZC
Zinc plated. 100 per carton.
SHELF NAILS
255 Standard Series
650 per package.
No.
Finish
KNA-255-81NALM
Almond
KNA-255-81NBR
Brass
KNA-255-81NSTB
Satin brass
KNA-255-81NWH
White
KNA-255-81NZC
Zinc
105
Abrasives
Pilaster – Surface
Edgebanding
& Veneers
Unit # 1729152
SHELF STANDARDS
233 Series
SUPPORT BRACKETS
& Machines
Shelving & Hardware
Unit # 1729151
Dim. In.
WxL
No.
Surfacing
Products
Shelf Standards, Supports & Brackets
Shelf Standards, Brackets & Accessories
Unit # 3619001
MONTEREY SHELF
Lgth.
In.
No.
SHELF STANDARDS
Electroplated – Anochrome
Speedy Shelf
No.
Lgth.
In.
Finish
KNA-180BLK12
Black
12
KNA-80ANO12
12
KNA-180BN12
Brown
12
KNA-80ANO18
18
KNA-180BR12
Brass
12
KNA-80ANO24
24
KNA-180WH12
White
12
KNA-80ANO36
36
KNA-180ANO14
Anochrome
14
KNA-80ANO48
48
KNA-180BLK14
Black
14
KNA-80ANO60
60
KNA-180BR14
Brass
14
KNA-80ANO72
72
KNA-180WH14
White
14
KNA-80ANO84
84
KNA-180ANO16
Anochrome
16
KNA-80ANO96
Electroplated – Brass
96
KNA-180BLK16
Black
16
KNA-180BN16
Brown
16
KNA-80BR24
24
KNA-80BR36
36
KNA-80BR48
48
KNA-80BR60
60
KNA-80BR72
72
KNA-80BR84
84
KNA-180WH16
White
16
KNA-180ANO18
Anochrome
18
KNA-180BLK18
Black
18
KNA-180BR18
Brass
18
KNA-180WH18
White
18
KNA-180ANO20
Anochrome
20
Unit # 1729143
Unit # 1729109A
Replaces shelf support clips and pegs. Interlocking
ends allow sections to be combined for custom
lengths. Plastic construction. Can be attached using
screws, nails or staples. 200 per box.
No.
Dim. In.
WxL
Load
Rating Lbs.
M18W
5/8 x 24
150 per shelf
SHELF STANDARD SCREWS
Color
Series 80
Beige
1-1/2” length with #8 body and #6 head. Polybagged,
50 per pkg.
No.
Finish
Unit # 1729200
KNA-80-80WH
White
KNA-80-80ZC
Zinc
Series 101
Unit # 1729136
No.
Slotted in 1” increments. 16-gauge steel construction.
Measures 5/8” W x 13/32” H. 10 per carton.
Lgth.
No.
In.
Powder-Coated – White
KNA-80WH12
12
KNA-80WH24
24
16-gauge steel construction. Adjustable on 1” centers.
10 brackets with UPC labels per pkg.
No.
Finish
Lgth.
In.
Anochrome
4
4
KNA-80WH36
36
KNA-180ANO4
KNA-80WH48
48
KNA-180BR4
Brass
KNA-80WH60
60
KNA-180WH4
White
4
KNA-80WH72
72
KNA-180ANO6
Anochrome
6
KNA-80WH84
84
KNA-180BLK6
Black
6
KNA-80WH96
Powder-Coated – Black
96
KNA-180BN6
Brown
6
KNA-180BR6
Brass
6
KNA-80BLK12
12
KNA-180WH6
White
6
KNA-80BLK24
24
KNA-180ANO8
Anochrome
8
KNA-80BLK36
36
KNA-180BLK8
Black
8
KNA-80BLK48
48
KNA-180BR8
Brass
8
KNA-80BLK60
60
KNA-180WH8
KNA-80BLK72
72
KNA-180ANO10
KNA-80BLK96
Powder-Coated – Brown
96
KNA-180BLK10
Black
10
KNA-180BN10
Brown
10
10
White
8
Anochrome
10
KNA-80BN36
36
KNA-180BR10
Brass
KNA-80BN60
60
KNA-180WH10
White
10
KNA-80BN72
72
KNA-180ANO12
Anochrome
12
106
Series 102 & 103
SHELF BRACKETS
SHELF STANDARDS
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
BRACKET & STANDARD
ACCESSORIES
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Desc.
KNA-101PLAS
Clear plastic back rest
KNA-102PLAS
Clear plastic front rest
KNA-103PLAS
Clear plastic front rest
KNA-104ANO
Anochrome back rest
KNA-104PLAS
Clear back rest
KNA-104-1/2PLAS
Clear back rest
Proudly Serving
Kansas, Missouri
& Oklahoma
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 1729197
Unit # 1729140
HANGING ROD SADDLES
For custom fixtures. 16-gauge steel construction. For use with 1” adjustment and
Series 85 standards for additional support.
Measures 3/4” W x 1/2” H. Anochrome finish. 10 per box.
Lgth.
No.
In.
SHELF STANDARDS
Heavy-Duty – Decorative
Standard
KNA-83ANO36
36
KNA-83ANO72
72
KNA-83ANO84
84
Attaches to Series 183 or 185 brackets. Anochrome
finish. 10 per box.
No.
For Rod
OD In.
KNA-191ANO
1-1/16
Unit # 1729206
Edgebanding
& Veneers
Sinks
Specialty – Oversized
Adhesives
& Caulk
SHELF STANDARDS
Unit # 1729243
Surfacing
Products
Unit # 1729110
SHELF RESTS
Brackets
Finish
Fastens to Series 185 bracket without screws. For
joining two shelves at one bracket. 100 per carton.
78
KNA-82BLK94
94
Black
No.
Finish
KNA-82WH94
94
White
KNA-106ANO
Anochrome
48
White
KNA-82BPWH78
78
White
24
SHELF STANDARDS
Heavy-Duty
KNA-85ANO36
36
No.
Finish
Qty.
KNA-85ANO48
48
KNA-82DPCSTRPWH
White
50
KNA-85ANO60
60
KNA-85ANO72
72
KNA-85ANO84
84
KNA-85ANO96
96
Snap-In Cover Strips
Unit # 1729207
KNA-85ANO24
12-gauge steel construction. 7/8” wide. Adjustable on
2” centers. 5 per package.
Lgth.
In.
Unit # 1729241
SHELF BRACKETS
No.
U
Heavy-Duty – Decorative
Anochrome
Unit # 1729138
SHELF BRACKETS
KNA-87ANO24
24
Double
KNA-87ANO36
36
KNA-87ANO48
48
KNA-87ANO60
60
KNA-87ANO72
72
KNA-87ANO84
84
Rounded corner design. 10 per carton.
Lgth.
In.
No.
KNA-87ANO96
White
KNA-182BPWH5
5
KNA-182WH9
9
Anochrome finish. Fits Series 85 double-slotted standards. 10 per box.
KNA-182BPWH105
10-1/2
KNA-182BPWH125
12-1/2
KNA-182BPWH145
14-1/2
KNA-182BPWH185
18-1/2
Black
KNA-182BLK9
96
White
9
Lgth.
In.
No.
16-Gauge Steel
KNA-185ANO8
8
KNA-185ANO10
10
KNA-185ANO12
12
KNA-182BLK105
10-1/2
KNA-182BLK185
18-1/2
KNA-185ANO14
14
KNA-182BLK24
24
KNA-185ANO16
16
KNA-185ANO18
18
KNA-185ANO20
20
KNA-185ANO22
22
KNA-185ANO24
24
14-Gauge Steel
KNA-87WH24
24
KNA-87WH36
36
KNA-87WH48
48
KNA-87WH60
60
KNA-87WH72
72
KNA-87WH84
84
KNA-87WH96
96
Stainless Steel
KNA-87SS36
36
KNA-87SS48
48
KNA-87SS72
72
107
Screws &
Fasteners
KNA-82BPWH48
16-gauge steel construction. Anochrome finish.
Accommodates Series 85 double-hook bracket or any
KV 1” adjustable brackets. 10 per package.
Lgth.
No.
Ft.
Storage &
Convenience
White
Wood
Products
16.5
Builder’s Pack
Lighting
KNA-82WH165
Black
Shelving
& Hardware
KNA-082BLK78
Cabinet Locks
& Latches
Lgth.
In.
Standard Pack
No.
Abrasives
Standard Pack. 10 per carton.
Builder’s Pack. 10 per carton without UPC labels.
& Machines
Cover Strip
Decorative
Hardware
SHELF STANDARDS
Double-Slot
Shelf Brackets
Unit # 1729134
SHELF BRACKETS
Unit # 1729139
SHELF BRACKETS
Lock Lever
Heavy-Duty
Left & Right-Hand
Series 186
Adjustable Slant
Series 187
Steel with single molded nylon cam lock lever. For use with Series 87 heavy-duty
standards. 10 per box.
Lgth.
No.
In.
Finish
Series 186
Center Flange
KNA-0186LLANO8
8
Anochrome
KNA-186LLANO10
10
Series 187
Anochrome
KNA-187LLANO12
14
Anochrome
KNA-187LLANO14
14
Anochrome
KNA-187LLANO16
16
Anochrome
KNA-187LLANO18
18
Anochrome
KNA-187LLANO20
20
Anochrome
KNA-187LLANO22
22
Anochrome
KNA-187LLANO24
24
Anochrome
KNA-187LLWH12
12
White
KNA-160LLANO8
KNA-160LLANO14
Left & Right-Hand Flange
For custom fixtures. Use with 1” adjustment steel standards.
No.
KNA-187LLWH14
14
White
KNA-187LLWH16
16
White
KNA-187LLWH18
18
White
KNA-173LZC10
KNA-187LLWH20
20
White
KNA-173LZC12
KNA-187LLWH22
22
White
KNA-187LLWH24
24
White
KNA-173RZC10
KNA-187LLSS12
12
Stainless steel
KNA-187LLSS14
14
Stainless steel
KNA-187LLSS16
16
Stainless steel
KNA-187LLSS18
Shelf Brackets
18
Stainless steel
KNA-173RZC12
108
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
8
14
Left-Hand
10
12
Right-Hand
10
12
Adjustable Slant
Finish
Anochrome
Anochrome
Zinc
Zinc
Zinc
Zinc
KNA-179ANO10
10
Anochrome
KNA-179ANO12
12
Anochrome
KNA-179ANO14
14
Center Flange
Anochrome
KNA-183CANO10
10
Anochrome
KNA-183CANO12
12
Anochrome
KNA-183CANO18
Our pledge is
customer service.
Lgth.
In.
Lock Lever
18
Left-Hand Flange
Anochrome
KNA-183LANO12
12
Anochrome
KNA-183LANO14
14
Anochrome
KNA-183LANO16
16
Anochrome
KNA-183LANO18
18
Anochrome
KNA-183LANO20
20
Right-Hand Flange
Anochrome
KNA-183RANO12
12
Anochrome
KNA-183RANO14
14
Anochrome
KNA-183RANO18
18
Anochrome
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Shelf Rests, Supports & Brackets
Unit # 1729242
L-BRACKETS
Sinks
Folding
Unit # 1729147
Center
KNA-206WH12
12
KNA-206WH16
16
Decorative
Hardware
Four adjustment positions: 90°, 80°, 70° and 0°. Supports up to 750 lbs. per pair.
Steel construction. White. 10 per carton.
Lgth.
No.
In.
End
Adhesives
& Caulk
Edgebanding
& Veneers
SHELF RESTS
Unit # 1729145
SHELF BRACKETS
Front
For anchoring shelves to 186 or 187 series brackets, and joining two shelves on one
bracket. Anochrome finish.
No.
Type
KNA-210ANO
End
KNA-211ANO
Center
KNA-212ANO
Shelf Rests, Supports & Brackets
Front
SHELF & ROD SUPPORTS
No.
Lgth.
In.
KNA-204ANO10
10
Screws &
Fasteners
Adjustable
Shelving
& Hardware
Mounts directly to wall. Anochrome finish. Packed 24 per carton.
Unit # 1729123
Unit # 1729146
SHELF BRACKETS
Heavy-Duty
Steel. Measures 10” H x 11” L. Includes screws. 10 per carton.
No.
KNA-208WH300
300
White
KNA-208WH500
500
White
KNA-208WH550
550
White
KNA-208BLK400
400
Black
KNA-208BLK500
500
Black
KNA-208BLK550
550
Black
other detailed
upon request.
Finish
KNA-1195CREAM
Cream enamel
KNA-1195WHITE
White enamel
Countertop Braces
Lighting
Unit # 1729124
SHELF & ROD SUPPORTS
5mm steel bar bracket with 3/4” steel strut. Epoxy-coated. Mounts directly to wall.
Holds up to 1000 lbs. per pair. 10 per carton.
Lgth.
No.
mm
Finish
Cabinet Locks
& Latches
White enamel
Abrasives
KNA-1194WHITE
109
& Machines
For use with or without moulding. Steel construction. Measures 8” H x 11” L.
Includes screws. 10 per carton.
No.
Finish
Wood
Products
Storage &
Convenience
Heavy-Duty
Countertop Braces & Concrete Screws
Unit # CAT09_PG13_sm
110
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sliding Door Frames & Tracks
Unit # 1729107
Unit # 1729112
SLIDING DOOR TRACK KITS
SLIDING DOOR GUIDES
Sinks
Vinyl
Unit # 1729105
1/4” glass door track. Complete assembly; includes
upper channel, lower track, 4 rollers, 4 vinyl guides and
2 shoes. Anochrome finish.
48
Tan
SLIDING DOOR CHANNELS
KNA-P2413TAN60
1/8
60
Tan
Roll-Ezy
KNA-P2413TAN72
1/8
72
Tan
KNA-P2417TAN60
1/4
60
Tan
KNA-P2417WAL48
1/4
48
Walnut
KNA-P1092ANOD36
36
KNA-P2417WAL60
1/4
60
Walnut
KNA-P1092ANOD48
48
KNA-P2417WAL72
1/4
72
Walnut
60
KNA-P2419TAN48
3/4
48
Tan
72
KNA-P2419TAN60
3/4
60
Tan
KNA-P2419TAN72
3/4
72
Tan
KNA-P2419WH48
3/4
48
White
KNA-P2421TAN48
1/2
48
Tan
GLASS DOOR TRACKS
KNA-P2421TAN60
1/2
60
Tan
By-Passing
KNA-P2421TAN72
1/2
72
Tan
Unit # 1729108
Upper channel for top and ends. Divider holds door in
position. 12-ft. length.
Dim. In.
No.
HxW
KNA-993ZC144
5/8 x 15/16
Shelving
& Hardware
Unit # 1729115
SLIDING DOOR CHANNELS
Double
Unit # 1729214
Adhesives
& Caulk
Unit # 1729222
1/8
Lgth.
In.
KNA-P1092ANOD72
Sliding Door Frames & Tracks
7/8
KNA-P2413TAN48
No.
KNA-P1092ANOD60
KNA-1085VINYL
Decorative
Hardware
Plastic by-passing door track. Available for 1/8”, 1/4”,
1/2” and 3/4” door thicknesses. Includes upper and
lower track.
Note: Some assemblies available in 12-ft. lengths.
For Door
Lgth
No.
Thick. In.
In.
Finish
Fits over top of glass in upper channel for silent operation. 100 per package.
Lgth.
No.
In.
Unit # 1729144
Edgebanding
& Veneers
SLIDING DOOR FRAME KITS
For use on top, bottom and ends of sliding door installations. Anodized aluminum construction.
Note: For use with 1/4” glass only.
Dim. In.
No.
HxWxL
48
KNA-P992ZC60
60
KNA-P992ZC72
72
Wood
Products
KNA-P992ZC48
Unit # 1729155
SLIDING DOOR TRACKS
KNA-899ZC144
Zinc plated steel. 12-ft. length.
No. KNA-893ZC144. Turned-back edges hold glass in
place.
No. KNA-899ZC144. Bearings ride freely on curved
anvil without contacting.
No.
Dim. In.
WxH
Desc.
KNA-893ZC144
15/32 x 5/8
Single track guide
KNA-899ZC144
1/2 x 1
Curved anvil track
Lighting
36
9/16 x 1-3/16 x 144
KNA-2412TAN144 & KNA-2418TAN144
Cabinet Locks
& Latches
KNA-P992ZC36
KNA-1093144
KNA-2416TAN144 & KNA-2420TAN144
We are continually
Call us with your
inquiries.
Plastic construction. 144” Length. Tan.
For Door
No.
Thick. In.
Dim.
In.
KNA-2412TAN144
1/4
KNA-2416TAN144
1/4
27/32 x 5/16
KNA-2418TAN144
3/4
1-15/16 x 3/4
KNA-2420TAN144
3/4
1-15/16 x 3/8
27/32 x 9/16
111
Abrasives
1/4” track for by-passing glass doors. Complete
assembly; includes upper channel, lower track, 2 ball
bearing carriers and 2 shoes.
Lgth.
No.
In.
& Machines
KNA-893ZC144
Storage &
Convenience
Screws &
Fasteners
SLIDING DOOR TRACKS & GUIDES
Sliding Door Tracks & Components
Unit # 1729180
Unit # 1729116
SLIDING DOOR TRACKS
SLIDING DOOR SHOES
Double
Unit # 1729223
SLIDING DOOR SHOES
Zinc plated steel. Measures 1/4” H x 1” W. Includes
screws.
Lgth.
No.
In.
For 1/4” thick glass. Slightly curved bottom for free rolling on ball bearings.
Ht.
Lgth.
No.
In.
Ft.
KNA-995ZC144
7/16
Sliding Door Tracks & Components
KNA-469ZC72
72
KNA-469ZC96
96
KNA-469ZC144
144
KNA-1095144
12
Unit # 1729224
SLIDING DOOR TRACKS
Unit # 1729225
1 x 144
BALL BEARING CARRIERS
Unit # 1729153
BALL BEARING CARRIERS
For 1/4” thick glass panes. Rollers insert in bottom.
Anodized aluminum construction.
Dim. In.
No.
HxL
Lower
Fiber construction. Neutral color.
No.
Dim. In.
H x L x Thick.
KNA-2401FIBRE72
1/2 x 72 x 1/8
Balls ride freely on curved anvil without contacting
sides of track.
No.
Lgth.
Ft.
KNA-999ZC144
12
Features two free rolling bearings on 3” centers. Provides two-point suspension between lower track and
shoe.
Lgth.
No.
Ft.
KNA-997ZC144
12
U
Unit # 1729217
SLIDING DOOR T-GUIDES
Unit # 1729120
Unit # 1729177
SLIDING DOOR TRACKS
SHEAVES
Double
Steel
Anodized aluminum construction.
Note: Cut glass 1-3/16” lower than opening when
using this track.
Dim. In.
No.
HxWxL
KNA-1099144
1/4 x 1-1/16 x 144
U
Separates sliding doors at top of frame. Measures 5/8”
H x 5/8” W. Zinc plated steel.
Lgth.
Ft.
No.
KNA-953ZC72
Round groove sheaves for use with Series 450, 455,
467 and 469 tracks.
6
KNA-953ZC96
8
KNA-953ZC144
12
Unit # 1729179
SLIDING DOOR TRACKS
No.
Frame
Dim. In.
LxW
Wheel
Dia. In.
KNA-429STL
2-1/4 x 3/8
1
Unit # 1729154
GROOVE GUIDES
Unit # 1729189
SHEAVES
Enclosed
KNA-455STL144
KNA-2406NYLON &
KNA-2407NYLON
KNA-467STL144
Steel construction. 12-ft. length.
No.
Dim. In.
HxW
KNA-455STL144
5/16 x 21/32
KNA-467STL144
112
5/16 x 7/16
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
KNA-2409NYLON
For fitting sliding doors into tracks. Nylon construction.
50 per package.
No. KNA-2409NYLON. Spring-loaded. Adjusts for
variations in opening. Requires 1/8” groove in top cavity, protrudes 3/16” above door.
Dim. In.
No.
LxW
Nylon sheave in 1-1/4” L x 5/16” W steel casing. For
use with 450, 455, 467 or 469 series tracks. Plain finish.
KNA-2406NYLON
1 x 1/4
No.
Desc.
KNA-2407NYLON
1-3/8 x 3/8
KNA-580STL
Drive type
KNA-2409NYLON
1-5/8 x 3/8
KNA-582STL
Flanged 2-1/4” x 5/16”
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 1729175
Unit # 1729163
Nylon Wheel
KNA-413XBR
2-15/16 x 7/16
No.
Finish
Pkg.
Qty.
KNA-29201ANO
Anochrome
12
1-3/16
Unit # 1729176
ROLLERS
Roller
Dim. In.
Dia. x W
Pkg.
Qty.
KNA-423STL
5/8 x 1-13/16
5/8 x 1/2
100
Wheel
Dia. In.
KNA-223NYLON
KNA-225NYLON
Unit # 1729201
KNA-592STL
2-1/4 x 9/32
1-3/16
Sheaves, Rollers, Closet Rods, Supports & Tubing
FINGER PULLS
Nylon construction.
No.
Flush
Unit # 1729192
SHEAVES
Heavy-Duty
Type
KNA-223NYLON
End
KNA-225NYLON
Saddle
Unit # 1729248
STEEL TUBING
Ball bearing sheave with round groove wheel. Side
fastening plate. Zinc-plated steel frame. For use with
Series 450, 455, 467 and 469 tracks.
Frame
Dim. In.
Wheel
No.
LxW
Dia. In.
1-3/8
U
U
Finish
Pkg.
Qty.
KNA-801XBR
KNA-801XNP
.775 x 1/4
Brass
100
.775 x 1/4
Nickel
KNA-803XBR
100
.770 x 3/8
Brass
100
KNA-803XNP
.770 x 3/8
Nickel
100
KNA-806ANO
2-1/16 x 3/32
Anochrome
50
KNA-806BR
2-1/16 x 3/32
Brass
50
Unit # 1729118
No.
OD
ID
Wall
Lgth.
In.
In.
Thick. In. In.
Chrome Finish
KNA-750-1-96
1-1/16
29/32
.075
96
KNA-750-1-144
1-1/16
29/32
.075
144
KNA-750-5-72
1-5/16
1-5/32
.075
72
KNA-750-5-96
1-5/16
1-5/32
.075
96
.075
144
.075
144
KNA-660BR144 1-1/16 29/32
.087
Stainless Steel Finish
144
Unit # 1729113
SLIDING DOOR ROLLERS
SLIDING DOOR BUMPERS
Rubber. Installs in jambs to cushion
glass. 100 per carton.
No.
Desc.
KNA-1087RUB
KNA-750-5-144
Door bumper
1-5/16 1-5/32
Bright Zinc Finish
KNA-PB75-5-144 1-5/16 1-5/32
Brass Finish
Unit # 1729097
CLOSET RODS
Fits 1095 shoe.
No.
Desc.
KNA-1097NYLON
Nylon
KNA-660SS96
1-1/16
29/32
.087
96
Ball bearing
KNA-660SS144
1-1/16
29/32
.087
144
KNA-1098ZC
Extension
Storage &
Convenience
2-5/16 x 1-5/16
Dim. In.
Dia. x Depth.
Wood
Products
KNA-607ZC
No.
Shelving
& Hardware
Round
Lighting
No.
Frame
Dim. In.
LxW
No.
Frame
Dim. In.
WxL
Adhesives
& Caulk
Convex wheel for use with thin doors. Steel frame.
Mates with inverted KV track Series 455. 100 per
package.
Unit # 1729150
HANGING ROD BRACKETS
Decorative
Hardware
Countersunk
for
wood
screws. Steel construction,
plain finish.
Unit # 1729190
For use as center support on 72” and 96”
closet rods.
Edgebanding
& Veneers
Bronze wheel on self-lubricating bearing. Brass finish
frame. 50 per carton.
Frame
Dim. In.
Wheel
No.
LxW
Dia. In.
Sinks
HANGING ROD SUPPORTS
Screws &
Fasteners
SHEAVES
SHEAVES
Surfacing
Products
Sheaves, Rollers, Closet Rods, Supports & Tubing
Unit # 1729199
Cabinet Locks
& Latches
STEEL TUBING
Heavy-Duty – Round
Steel Roller
Zinc coated.
Lgth.
In.
No.
For use with 450, 455, 467 or 469 series tracks. Features axle bearing grooved roller and steel frame. 100
per box.
No.
Frame
Dim. In.
LxW
Wheel
Dim. In.
Dia. x W
KNA-620STL
1-7/8 x 7/16
11/16 x 9/32
18 to 30
KNA-KV2ZC30
30 to 48
KNA-KV2ZC48
48 to 72
KNA-KV2ZC72
72 to 120
Abrasives
10 Per Carton
KNA-KV2ZC18
KNA-KV2ZC96
96 to 144
Bulk Packed – 20 Per Carton
Chrome finish. .109” wall thickness.
Packaged 6 per carton.
OD
No.
In.
KNA-KV2BPZC30
KNA-770-1-144
1-1/16
27/32
KNA-770-5-144
1-5/16
1-3/32
30 to 48
144” length.
ID
In.
113
& Machines
Unit # 1729193
SHEAVES
Tubing, Flanges, Closet Rods & Shelf Supports
Unit # 1729167
Unit # 1729209
SHELF SUPPORTS
Unit # 1729198
STEEL TUBING
TUBING END CAPS
Oval
Anochrome finish. 50 per package.
No.
For
Tubing
KNA-730ANO
KV Series 660
KNA-731ANO
1-1/16” OD
KNA-732ANO
1-5/16” OD
No.
For Hole
Dia.
Finish
KNA-331ANO
1/4”
Anochrome
Unit # 1729150
Unit # 3461001
Measures 30mm H x 15mm W. Heavy-gauge construction with welded seams. 1.2mm wall thickness.
Chrome finish. 10 per package.UU
Lgth.
In.
No.
KNA-880CHR96
KNA-331BR
1/4”
Brass
KNA-332ANO
5mm
Anochrome
5mm
Brass
KNA-332BR
BAR RAIL COMPONENTS
Unit # 4031049
96
KNA-880CHR144
144
Tubing, Flanges, Closet Rods & Shelf Supports
245S112
SHELF SUPPORTS
For electronic welding into single rigid unit.
No.
Desc.
Unit # 1729249
TUBING FLANGES
Spoon Shaped
108PCH1
1” Flange, chrome
245S112
Steel tubing, 1” OD x 12-ft. L
Unit # 4031013
CLOSET RODS
KNA-734BR & KNA-734CHR KNA-735BR & KNA-735CHR
SS211/4AC
Lgth.
Ft.
Finish
Steel – 30mm x 15mm x 1mm
CR-50BP
8
Brass
CR-50CP
8
Chrome
Antique copper
SS211/4NI
Nickel
SS211/4PB
Polished brass
Pin Dia. 5mm
SS215MMAB
CR-51CP
12
Chrome
Aluminum – 30mm x 15mm x 1.5mm
KNA-764CHR
Finish
Pin Dia. 1/4”
No.
KNA-757ANO
No.
Oval
CR-50ORB
8
Oil-rubbed bronze
CR-50SN
8
Satin
CR-51ORB
12
Oil-rubbed bronze
CR-51SN
12
Satin
Antique brass
SS215MMNI
Nickel
SS215MMPB
Polished brass
Unit # 1729168
Unit # 4031014
SHELF SUPPORTS
CLOSET RODS
KNA-766CHR
Round
KNA-881CHR
For use with KV steel tubing.
For
Tubing
No.
OD In.
KNA-734BR
1-1/16
No.
Desc.
Finish
Closed end
Brass
KNA-734CHR
1-1/16
Closed end
Chrome
KNA-735BR
1-1/16
Open end
Brass
KNA-735CHR
1-1/16
Open end
Chrome
KNA-742CHR
1-1/16
Chrome
Chrome
KNA-757ANO
1-1/16
Pilaster
Ano.
KNA-760ANO
1-1/16 24” Center support
KNA-764CHR
1-5/16
Closed end
Chrome
KNA-766CHR
1-5/16
Open end
Chrome
KNA-881CHR
–
For oval tubing
Chrome
114
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Ano.
Lgth.
Ft.
Dia.
In.
Steel
Thick.
mm
Finish
7/32” pin diameter. 5/16” pin length. 1000 per package.
CR-60BP
8
1-1/4
1.2
Brass
CR-60CP
8
1-1/4
1.2
Chrome
CR-62CP
12
1-1/4
1.2
Chrome
No.
Hole
Dia. In.
Finish
CR-70CP
8
1-1/16
1.2
Chrome
KNA-333ZC
1/4
Zinc plated
CR-71CP
8
1-1/16
2.0
Chrome
CR-72CP
12
1-1/16
1.2
Chrome
CR-73CP
12
1-1/16
2.0
Chrome
CR-80CP
8
1-5/16
2.0
Aluminum
Chrome
CR-80ORB
8
1-5/16
2.0
Oil-rubbed
bronze
CR-80SN
8
1-5/16
2.0
Satin nickel
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Phone or FAX
your order today!!
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3468227
Unit # 4031051
Unit # 1729173
SHELF SUPPORTS
Finish
Almond
KNA-348BRN
Brown
KNA-348WH
Shelf Supports & Clips
White
SS23BGE
Beige
JUL-3400101100
White
SS23BRN
Brown
Unit # 3468134
SHELF SUPPORTS
SS23CLR
Clear
SS23WT
White
Unit # 3003001
Nylon construction with 5mm steel
pin. Features low back flange.
1000 per pkg.
Unit # 1729172
SHELF SUPPORTS
Steel
No.
Color
JUL-3400401100
White
JUL-3400401121
Almond
JUL-3400401198
Clear
JUL-3400402205
Brown
Unit # 3627001
SHELF SUPPORTS
Locking Tongue
For 3/4” thick shelves. Pin measures
5/16” L x 5mm dia. Clear.
Unit # 1729169
Features 1/2” x 11/16” shelf rest. 1/4” pin diameter, 3/8”
pin length. 100 per bag.
No.
Qty.
No.
Finish
3225CL-32
100
KNA-346ANO
Anochrome
3225CL-62
1000
KNA-346BR
Brass
KNA-346WAL
Walnut
SHELF SUPPORTS
Unit # 1729109
Dual Sized – Plastic
BRACKET ACCESSORIES
For use with 3/4” or 1” thick shelves.
Locking tab design with two 5mm
diameter pegs.
No.
Desc.
KNA-129RUB
Rubber cushion for metal rests
Unit # 4031048
7/16” pin length. 1/2” x 13/32” shelf rest. 100 per box.
For Hole
No.
Dia. In.
Color
KNA-335PLAS
Surfacing
Products
Unit # 3003010
Unit # 3627001
SHELF SUPPORTS
Plastic
1/4
No.
3220CL-62
Load
Cap. Lbs.
250
Color
Clear
Tan
Unit # 3044061
Screws &
Fasteners
No.
KNA-348ALM
Color
Color
Decorative
Hardware
No.
No.
Storage &
Convenience
Fits 5mm holes. Steel construction. 5/16” pin length,
1/2” W x 11/16” L shelf rest. 1000 per package.
5mm pin diameter.
Nylon construction with 5mm dia. pin. 1000 per pkg.
Shelving
& Hardware
Plastic
Vinyl Coated
Adhesives
& Caulk
Edgebanding
& Veneers
SHELF SUPPORTS
Wood
Products
SHELF SUPPORTS
Sinks
Shelf Supports & Clips
Unit # 3632001
Lighting
SHELF SUPPORTS
SHELF CLIPS
Standard
Locking – Polymer
Finish
SS01-1/4AB
Antique brass
SS01-1/4AC
Antique copper
SS01-1/4NI
Nickel
SS01-1/4PB
Polished brass
Pin Dia. 5mm
Abrasives
Pin Dia. 1/4”
Polypropylene construction. Features double brace
under platform for heavy loads.
No.
SS01-5MMNI
Nickel
SS01-5MMPB
Polished brass
25-227
Color
Pkg.
Qty.
Brown
10,000
5mm boss size.
No.
REV-RAS305-34-020
Size
In.
Color
Qty.
3/4
Clear
1000
115
& Machines
No.
SHELF SUPPORTS
Cabinet Locks
& Latches
L-Shaped – w/ Hole
NOTES
116
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Finish
Qty.
No.
#8 x 1-1/2”
Zinc
6000
11024
7648
#10 x 5/8”
Black
100
5849
#10 x 5/8”
Black
1000
Size
Finish
Qty.
#10 x 1”
Nickel
1000
10993
#10 x 1”
Nickel
7000
9802
#12 x 5/8”
Zinc
1000
9803
#12 x 3/4”
Zinc
1000
152
#10 x 5/8”
Black
10,000
SCREWS
5595
#10 x 5/8”
Zinc
1000
Pan Head – Phillips Drive
170
#10 x 5/8”
Zinc
10,000
11019
#10 x 5/8”
Nickel
100
7649
#10 x 3/4”
Black
100
5850
#10 x 3/4”
Black
1000
154
#10 x 3/4”
Black
9000
5596
#10 x 3/4”
Zinc
1000
171
#10 x 3/4”
Zinc
9000
11027
#10 x 3/4”
Nickel
100
11026
#10 x 3/4”
Nickel
1000
9341
#10 x 3/4”
Nickel
9000
Features
full-length
QuickScrews®
thread pattern. Nickel finish. 100 per pkg.
No.
Size
7650
#10 x 1”
Black
100
13094
#8 x 1-1/4”
5851
#10 x 1”
Black
1000
13095
#8 x 1-1/2”
155
#10 x 1”
Black
7000
13096
#8 x 1-3/4”
5597
#10 x 1”
Zinc
1000
174
#10 x 1”
Zinc
7000
11023
#10 x 1”
Nickel
100
11022
#10 x 1”
Nickel
1000
10992
#10 x 1”
Nickel
7000
7651
#10 x 1-1/4”
Black
100
WOOD SCREWS
Truss Head
9805
#12 x 1”
Zinc
1000
Pan Head, Round Washer Head & Wood Screws
SCREWS
Black
100
5836
#6 x 1/2”
Black
1000
144
#6 x 1/2”
Black
30,000
157
#6 x 1/2”
Zinc
30,000
7640
#6 x 5/8”
Black
100
5837
#6 x 5/8”
Black
1000
145
#6 x 5/8”
Black
25,000
5586
#6 x 5/8”
Zinc
1000
158
#6 x 5/8”
Zinc
25,000
7641
#6 x 3/4”
Black
100
5838
#6 x 3/4”
Black
1000
146
#6 x 3/4”
Black
20,000
6109
#6 x 3/4”
Zinc
1000
159
#6 x 3/4”
Zinc
20,000
7642
#6 x 1”
Black
100
5839
#6 x 1”
Black
1000
5173
#6 x 1”
Black
15,000
9616
#8 x 1/2”
Black
100
9615
#8 x 1/2”
Black
1000
6882
#8 x 1/2”
Black
15,000
8092
#6 x 1/2”
Zinc
1000
5589
#8 x 1/2”
Zinc
1000
8083
#6 x 1/2”
Zinc
30,000
163
#8 x 1/2”
Zinc
15,000
8091
#6 x 1/2”
Antique brass
1000
7645
#8 x 5/8”
Black
100
8081
#6 x 1/2”
Antique brass
30,000
5843
#8 x 5/8”
Black
1000
8094
#6 x 5/8”
Zinc
1000
147
#8 x 5/8”
Black
12,000
8084
#6 x 5/8”
Zinc
25,000
5590
#8 x 5/8”
Zinc
1000
8093
#6 x 5/8”
Antique brass
1000
164
#8 x 5/8”
Zinc
12,000
8082
#6 x 5/8”
Antique brass
25,000
7646
#8 x 3/4”
Black
100
8096
#8 x 5/8”
Zinc
1000
5834
#8 x 3/4”
Black
1000
8085
#8 x 5/8”
Zinc
12,000
148
#8 x 3/4”
Black
10,000
JUL-606N100
#6 x 5/8”
100
8095
#8 x 5/8”
Antique brass
1000
5591
#8 x 3/4”
Zinc
1000
JUL-6062N1000
#6 x 1/2”
1000
7981
#8 x 5/8”
Antique brass
12,000
165
#8 x 3/4”
Zinc
10,000
JUL-6064N1000
#6 x 3/4”
1000
8099
#8 x 3/4”
Zinc
1000
7647
#8 x 1”
Black
100
JUL-606N1000
#6 x 5/8”
1000
8086
#8 x 3/4”
Zinc
10,000
5845
#8 x 1”
Black
1000
JUL-707N100
#7 x 5/8”
100
8161
#8 x 3/4”
Antique brass
100
150
#8 x 1”
Black
9000
JUL-7074N100
#7 x 3/4”
100
8160
#8 x 3/4”
Antique brass
1000
5592
#8 x 1”
Zinc
1000
6797
#8 x 3/4”
Antique brass
10,000
166
#8 x 1”
Zinc
9000
10478
#8 x 1”
Zinc
100
WOOD SCREWS
9618
#8 x 1-1/4”
Black
100
10477
#8 x 1”
Zinc
1000
Deep Thread
9617
#8 x 1-1/4”
Black
1000
10189
#8 x 1”
Zinc
9000
151
#8 x 1-1/4”
Black
9000
11021
#10 x 5/8”
Nickel
100
5593
#8 x 1-1/4”
Zinc
1000
11020
#10 x 5/8”
Nickel
1000
167
#8 x 1-1/4”
Zinc
9000
10991
#10 x 5/8”
Nickel
10,000
Unit # 3468234
6263
#10 x 1-1/4”
Black
1000
5973
#10 x 1-1/4”
Black
6000
6259
#10 x 1-1/4”
Zinc
1000
For attaching rear fixing brackets and
drawer bottoms. Nickel finish.
No.
Size
Qty.
5972
#10 x 1-1/4”
Zinc
6000
JUL-612TH100
7811
#10 x 1-1/2”
Zinc
1000
6565
#10 x 1-1/2”
Zinc
Type 17 Point
5000
100
Surfacing
Products
Screws &
Fasteners
#6 x 1/2”
Unit # 3468232
WOOD SCREWS
Deep Thread – Flat Head
606 Series. For attaching narrow locking devices.
Nickel.
707 Series. For attaching cabinet profiles.
No.
Size
Qty.
#2 POZI Drive
JUL-606P1000
#6 x 5/8”
#2 Phillips Drive
1000
Unit # 3468236
Unit# 3468176
#2 Phillips drive. Nickel finish.
No.
Size
Flat Head
JUL-8114Z
#8 x 1-1/4”
JUL-8200Z
#8 x 2”
Flat Head Truss Head
Truss Head
12328
#8 x 1-1/2”
Black
100
11017
#10 x 3/4”
Nickel
100
5847
#8 x 1-1/2”
Black
1000
11016
#10 x 3/4”
Nickel
1000
6765
#8 x 1-1/2”
Black
6000
JUL-834TH100
#8 x 3/4”
10918
#10 x 3/4”
Nickel
9000
5594
#8 x 1-1/2”
Zinc
1000
JUL-1034N1000
#10 x 3/4”
11024
#10 x 1”
Nickel
100
#6 x 1/2”
Decorative
Hardware
Round Washer Head – Phillips Drive
7639
Shelving
& Hardware
Qty.
117
Storage &
Convenience
Size
Finish
Standard Point
Wood
Products
No.
Lighting
Features Quick$crews® thread pattern.
Type 17 Point. Reduces splitting
when working near edge of material.
Adhesives
& Caulk
Unit # 3748038
Cabinet Locks
& Latches
Unit # 3748004
Abrasives
Screws & Fasteners
& Machines
No.
Sinks
Size
168
Edgebanding
& Veneers
Pan Head, Round Washer Head & Wood Screws
Hinge & Hardware Screws
No.
Size
Finish
Truss Head – Phillips Drive
Qty.
No.
Size
Finish
Qty.
13595
#6 x 3/4”
Nickel
20,000
8098
#8 x 5/8”
Zinc
1000
13568
#6 x 1”
Zinc
100
7892
#8 x 5/8”
Zinc
10,000
13562
#6 x 1”
Zinc
1000
13,000
13701
#8 x 5/8”
Zinc
10,000
13468
#6 x 1”
Zinc
COMPACT HINGE SCREWS
8157
#8 x 3/4”
Zinc
1000
13569
#6 x 1-1/4”
Zinc
100
Square Drive
6802
#8 x 3/4”
Zinc
10,000
13563
#6 x 1-1/4”
Zinc
1000
8097
#8 x 5/8”
Antique brass
1000
13469
#6 x 1-1/4”
Zinc
10,000
8100
#8 x 3/4”
Antique brass
1000
13570
#6 x 1-1/2”
Zinc
100
10,000
13564
#6 x 1-1/2”
Zinc
1000
13470
#6 x 1-1/2”
Zinc
8000
Unit # 3748061
7915
#8 x 3/4”
Antique brass
Hinge & Hardware Screws
Unit # 3748058
HARDWARE SCREWS
Unit # 3748002
Truss Head
Pan Head
Flat Head – Square Drive
HARDWARE SCREWS
For installation of compact hinges in framed cabinetry.
Features #2 drive, Quick$crews® thread pattern and
Type 17 point.
No.
Size
Finish
Qty.
Pan Head
13621
#8 x 5/8”
Zinc
1000
13579
#8 x 5/8”
Zinc
12,000
13625
#8 x 5/8”
Antique brass
1000
13583
#8 x 5/8”
Antique brass
12,000
13622
#8 x 3/4”
Zinc
1000
13580
#8 x 3/4”
Zinc
10,000
13626
#8 x 3/4”
Antique brass
13584
#8 x 3/4”
Antique brass
Truss Head
1000
10,000
13623
#8 x 5/8”
Zinc
1000
13581
#8 x 5/8”
Zinc
10,000
13627
#8 x 5/8”
Antique brass
1000
13585
#8 x 5/8”
Antique brass
10,000
13624
#8 x 3/4”
Zinc
1000
13582
#8 x 3/4”
Zinc
10,000
13628
#8 x 3/4”
Antique brass
1000
13586
#8 x 3/4”
Antique brass
10,000
Flat Head
Phillips
Drive
Features Quick$crews® thread pattern and Type 17
point.
No.
Size
Finish
Qty.
#1 Drive
13304
#6 x 1/2”
Zinc
1000
13285
#6 x 1/2”
Zinc
25,000
13305
#6 x 5/8”
Zinc
1000
13286
#6 x 5/8”
Zinc
25,000
13306
#6 x 3/4”
Zinc
1000
13287
#6 x 3/4”
Zinc
20,000
13307
#6 x 1”
Zinc
1000
13288
#6 x 1”
Zinc
13,000
13308
#6 x 1-1/4”
Zinc
1000
13289
#6 x 1-1/4”
Zinc
10,000
13309
#6 x 1-1/2”
Zinc
1000
13290
Zinc
8000
Combo
Drive
For installing hardware items at edge of wood surface.
.275” OD Head. allows use with hinge plates and
drawer slides featuring tightly countersunk holes.
No.
Size
Finish
Phillips Drive – .275” OD Head
Qty.
9591
#6 x 1/2”
Zinc
100
5783
#6 x 1/2”
Zinc
1000
9590
#6 x 1/2”
Zinc
5000
9526
#6 x 1/2”
Zinc
25,000
10742
#6 x 1/2”
Nickel
100
10739
#6 x 1/2”
Nickel
1000
10736
#6 x 1/2”
Nickel
5000
10505
#6 x 1/2”
Nickel
25,000
9593
#6 x 5/8”
Zinc
100
5784
#6 x 5/8”
Zinc
1000
9592
#6 x 5/8”
Zinc
5000
13565
#6 x 1/2”
Zinc
100
9501
#6 x 5/8”
Zinc
25,000
13559
#6 x 1/2”
Zinc
1000
10743
#6 x 5/8”
Nickel
100
#6 x 5/8”
Nickel
1000
Unit # 3748025
KNIFE HINGE SCREWS
#6 x 1-1/2”
#2 Drive
Square
Drive
13635
#6 x 1/2”
Zinc
5000
10740
13465
#6 x 1/2”
Zinc
25,000
10737
#6 x 5/8”
Nickel
5000
13670
#6 x 1/2”
Nickel
100
10506
#6 x 5/8”
Nickel
25,000
13647
#6 x 1/2”
Nickel
1000
9597
#6 x 3/4”
Zinc
100
13638
#6 x 1/2”
Nickel
5000
9596
#6 x 3/4”
Zinc
1000
13593
#6 x 1/2”
Nickel
25,000
9595
#6 x 3/4”
Zinc
5000
#6 x 3/4”
Zinc
20,000
13566
#6 x 5/8”
Zinc
100
9594
13560
#6 x 5/8”
Zinc
1000
10744
#6 x 3/4”
Nickel
100
For use with compact, institutional and knife hinges, as
well as magnetic catches and mending plates. Features Type 17 auger point for reduced splitting when
working near edge of material. Quick$crews® thread
pattern provides increased holding power while reducing “spin out” and “pull out”.
No. 13701. Features sheet metal thread pattern with
Type AB point.
No.
Size
Finish
Qty.
Round Washer Head – Combo Drive
13636
#6 x 5/8”
Zinc
5000
10741
#6 x 3/4”
Nickel
1000
13466
#6 x 5/8”
Zinc
25,000
10738
#6 x 3/4”
Nickel
5000
13567
#6 x 3/4”
Zinc
100
7773
#8 x 5/8”
Plain
1000
13561
#6 x 3/4”
Zinc
1000
7379
#8 x 5/8”
Plain
10,000
13637
7775
#8 x 3/4”
Plain
1000
13467
#6 x 3/4”
Zinc
20,000
7380
#8 x 3/4”
Plain
10,000
13672
#6 x 3/4”
Nickel
100
9118
#8 x 3/4”
Zinc
1000
13649
8883
#8 x 3/4”
Zinc
10,000
13640
Round Washer Head
Combo Drive
118
Truss Head
Phillips Drive
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
13671
#6 x 5/8”
Nickel
100
13648
#6 x 5/8”
Nickel
1000
13639
#6 x 5/8”
Nickel
5000
13594
#6 x 5/8”
#6 x 3/4”
#6 x 3/4”
#6 x 3/4”
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Nickel
25,000
Zinc
5000
Nickel
Nickel
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
1000
5000
10507
#6 x 3/4”
Nickel
20,000
Phillips Drive – .275” OD Head – Type 17 Point
13641
#6 x 1/2”
Zinc
13629
#6 x 1/2”
Zinc
5000
13587
#6 x 1/2”
Zinc
25,000
13642
#6 x 5/8”
Zinc
1000
13630
#6 x 5/8”
Zinc
5000
13588
#6 x 5/8”
Zinc
25,000
13643
#6 x 3/4”
Zinc
1000
13631
#6 x 3/4”
Zinc
5000
13589
#6 x 3/4”
Zinc
20,000
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
1000
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Size
Finish
Qty.
No.
Size
Finish
13644
#6 x 1/2”
Nickel
1000
7692
#5 x 3/4”
Bright brass
100
13632
#6 x 1/2”
Nickel
5000
6199
#5 x 3/4”
Bright brass
1000
13590
#6 x 1/2”
Nickel
25,000
6214
#5 x 3/4”
Bright brass
5000
13646
#6 x 3/4”
Nickel
1000
5882
#5 x 3/4”
Bright brass
25,000
13634
#6 x 3/4”
Nickel
6200
#5 x 1”
Bright brass
1000
13592
#6 x 3/4”
Nickel
Phillips Drive
6215
#5 x 1”
Bright brass
5000
5883
#5 x 1”
Bright brass
18,000
1000
6231
#6 x 1/2”
Antique brass
5000
9175
#6 x 1/2”
Zinc
1000
206
#6 x 1/2”
Antique brass
25,000
9172
#6 x 1/2”
Zinc
5000
8650
#6 x 5/8”
Zinc
1000
9014
#6 x 1/2”
Zinc
25,000
8394
#6 x 5/8”
Zinc
20,000
9181
#6 x 5/8”
Zinc
100
6225
#6 x 5/8”
Antique brass
1000
9176
#6 x 5/8”
Zinc
1000
6233
#6 x 5/8”
Antique brass
5000
9173
#6 x 5/8”
Zinc
5000
9015
#6 x 5/8”
Zinc
25,000
207
#6 x 5/8”
Antique brass
20,000
11983
#6 x 5/8”
7695
#6 x 5/8”
Bright brass
100
6202
#6 x 5/8”
Bright brass
1000
Zinc w/ cream head 25,000
9182
#6 x 3/4”
Zinc
100
9177
#6 x 3/4”
Zinc
1000
9174
#6 x 3/4”
9016
9183
Flat Head
Oval Head
Pan Head
Fine thread pattern prevents splitting in hardwoods.
Note: Pre-drilling pilot hole is recommended.
No.
Size
Finish
Qty.
Flat Head
7493
#4 x 1/2”
Zinc
100
6217
#6 x 5/8”
Bright brass
5000
6176
#4 x 1/2”
Zinc
1000
219
#6 x 5/8”
Bright brass
20,000
100
Zinc
5000
#6 x 3/4”
Zinc
20,000
6186
#4 x 1/2”
Zinc
5000
7699
#6 x 3/4”
Bright brass
#8 x 5/8”
Zinc
100
5887
#4 x 1/2”
Zinc
40,000
7700
#6 x 1”
Bright brass
100
9178
#8 x 5/8”
Zinc
1000
6192
#4 x 1/2”
Bright brass
1000
6205
#6 x 1”
Bright brass
1000
9017
#8 x 5/8”
Zinc
14,000
6207
#4 x 1/2”
Bright brass
5000
5885
9184
#8 x 3/4”
Zinc
100
5878
#4 x 1/2”
Bright brass
40,000
#6 x 1
Bright brass
Flat Head w/ Type 17 Point
9179
#8 x 3/4”
Zinc
1000
7494
#4 x 5/8”
Zinc
100
6198
#5 x 5/8”
Bright brass
9018
#8 x 3/4”
Zinc
12,000
6177
#4 x 5/8”
Zinc
1000
6220
#6 x 5/8”
Bright brass
5000
9776
#9 x 3/4”
Zinc
100
6187
#4 x 5/8”
Zinc
5000
4288
#6 x 5/8”
Bright brass
20,000
9773
#9 x 3/4”
Zinc
1000
5888
#4 x 5/8”
Zinc
40,000
6112
#6 x 3/4”
Bright brass
1000
9770
#9 x 3/4”
Zinc
10,000
7686
#4 x 5/8”
Bright brass
100
5374
#6 x 3/4”
Bright brass
9774
#9 x 1”
Zinc
1000
9771
#9 x 1”
Zinc
Combo Drive
9000
6193
#4 x 5/8”
Bright brass
1000
4289
6208
#4 x 5/8”
Bright brass
5000
#6 x 3/4”
Bright brass
Oval Head
#4 x 5/8”
Bright brass
40,000
13,000
1000
5000
20,000
10443
#6 x 1/2”
Zinc
1000
5879
6223
#5 x 5/8”
Antique brass
10442
#6 x 1/2”
Zinc
5000
7495
#4 x 3/4”
Zinc
100
6230
#5 x 5/8”
Antique brass
5000
4875
#6 x 1/2”
Zinc
25,000
6178
#4 x 3/4”
Zinc
1000
193
#5 x 5/8”
Antique brass
25,000
10446
#6 x 5/8”
Zinc
1000
6188
#4 x 3/4”
Zinc
5000
6226
#6 x 5/8”
Antique brass
1000
10445
#6 x 5/8”
Zinc
5000
5889
#4 x 3/4”
Zinc
30,000
6234
#6 x 5/8”
Antique brass
6478
#6 x 5/8”
Zinc
25,000
7496
#4 x 1”
Zinc
100
197
10449
#6 x 3/4”
Zinc
1000
6179
#4 x 1”
Zinc
1000
#6 x 5/8”
Antique brass
Pan Head
10448
#6 x 3/4”
Zinc
5000
6189
#4 x 1”
Zinc
5000
4617
#6 x 3/4”
Zinc
20,000
7803
#8 x 5/8”
Plain
1000
9812
#8 x 5/8”
Plain
14,000
6258
#8 x 3/4”
Plain
Square Drive
1000
10444
#6 x 1/2”
Zinc
100
10447
#6 x 5/8”
Zinc
10450
#6 x 3/4”
Zinc
12520
#8 x 5/8”
4952
12521
20,000
Antique brass
1000
6228
#5 x 1/2”
Antique brass
5000
200
#5 x 1/2”
Antique brass
30,000
7689
#5 x 1/2”
Bright brass
100
100
6196
#5 x 1/2”
Bright brass
1000
100
6211
#5 x 1/2”
Bright brass
5000
Zinc
1000
216
#5 x 1/2”
Bright brass
30,000
#8 x 5/8”
Zinc
14,000
6222
#5 x 5/8”
Antique brass
1000
#8 x 3/4”
Zinc
1000
6229
#5 x 5/8”
Antique brass
5000
4953
#8 x 3/4”
Zinc
12,000
201
#5 x 5/8”
Antique brass
25,000
5827
#8 x 3/4”
Black
1000
8285
#5 x 5/8”
Bright brass
100
178
#8 x 3/4”
Black
12,000
6197
#5 x 5/8”
Bright brass
1000
6212
#5 x 5/8”
Bright brass
5000
217
#5 x 5/8”
Bright brass
25,000
Hardware Screws
Sinks
Edgebanding
& Veneers
20,000
Lighting
Zinc
#5 x 1/2”
Antique brass
Cabinet Locks
& Latches
#4 x 1”
6221
6 x 5/8
5000
20,000
to serve you:
• Kansas City, KS
• Wichita, KS
• Springfield, MO
• Tulsa, OK
Abrasives
5890
211
1000
Adhesives
& Caulk
100
Decorative
Hardware
Antique brass
Zinc
#6 x 1/2”
#6 x 1/2”
Shelving
& Hardware
6224
9180
Screws &
Fasteners
100
Storage &
Convenience
#7 x 3/4”
Nickel
Phillips Drive – Type 17 Point
HARDWARE SCREWS
Phillips Drive – Twinfast
Wood
Products
11288
5000
20,000
Unit # 3748024
Qty.
119
& Machines
No.
Surfacing
Products
Hardware Screws
Hardware Screws
Size
Finish
Qty.
No.
Size
Finish
Qty.
9219
#6 x 1/2”
Nickel
5000
5787
#6 x 1-1/4”
Zinc
1000
115
#6 x 1/2”
Nickel
25,000
124
#6 x 1-1/4”
Zinc
10,000
7518
#6 x 1/2”
Black
100
7507
#6 x 1-1/2”
Zinc
100
6246
#6 x 1/2”
Black
1000
5788
#6 x 1-1/2”
Zinc
1000
HARDWARE SCREWS
6250
#6 x 1/2”
Black
5000
125
#6 x 1-1/2”
Zinc
8000
Phillips Drive
1623
#6 x 1/2”
Black
25,000
9192
#7 x 5/8”
Zinc
100
1235
#6 x 5/8”
Zinc
100
9191
#7 x 5/8”
Zinc
1000
1187
#6 x 5/8”
Zinc
1000
9190
#7 x 5/8”
Zinc
5000
1236
#6 x 5/8”
Zinc
5000
8995
#7 x 5/8”
Zinc
20,000
116
#6 x 5/8”
Zinc
25,000
9613
#7 x 5/8”
Plain
1000
6089
#6 x 5/8”
Bright brass
1000
9612
#7 x 5/8”
Plain
5000
6140
#6 x 5/8”
Bright brass
5000
4991
#7 x 5/8”
Nickel
100
4722
#6 x 5/8”
Bright brass
25,000
3367
#7 x 5/8”
Nickel
500
7481
#6 x 5/8”
Antique brass
100
5901
#7 x 5/8”
Nickel
1000
5867
#6 x 5/8”
Antique brass
1000
9223
#7 x 5/8”
Nickel
5000
6159
#6 x 5/8”
Antique brass
5000
126
#7 x 5/8”
Nickel
20,000
235
#6 x 5/8”
Antique brass
25,000
3368
#7 x 3/4”
Nickel
500
6238
#6 x 5/8”
Plain
1000
9217
#7 x 3/4”
Nickel
1000
6243
#6 x 5/8”
Plain
5000
9224
#7 x 3/4”
Nickel
5000
6066
#6 x 5/8”
Plain
25,000
10166
#7 x 3/4”
Nickel
20,000
3364
#6 x 5/8”
Nickel
500
9163
#7 x 1”
Nickel
500
8906
#6 x 5/8”
Nickel
1000
9218
#7 x 1”
Nickel
1000
9220
#6 x 5/8”
Nickel
5000
9094
#7 x 1”
Nickel
10,000
117
#6 x 5/8”
Nickel
25,000
5789
#8 x 5/8”
Zinc
1000
7519
#6 x 5/8”
Black
100
127
#8 x 5/8”
Zinc
14,000
6251
#6 x 5/8”
Black
5000
7474
#8 x 5/8”
Bright brass
100
119
#6 x 5/8”
Black
25,000
6091
#8 x 5/8”
Bright brass
1000
1237
#6 x 3/4”
Zinc
100
6150
#8 x 5/8”
Bright brass
5000
1189
#6 x 3/4”
Zinc
1000
293
#8 x 5/8”
Bright brass
14,000
3987
#6 x 3/4”
Zinc
5000
6240
#8 x 5/8”
Plain
1000
120
#6 x 3/4”
Zinc
20,000
3968
#8 x 5/8”
Plain
14,000
7472
#6 x 3/4”
Bright brass
100
7837
#8 x 5/8”
Black
1000
6090
#6 x 3/4”
Bright brass
1000
6542
#8 x 5/8”
Black
14,000
6149
#6 x 3/4”
Bright brass
5000
7383
#8 x 3/4”
Zinc
100
1293
#6 x 3/4”
Bright brass
20,000
5790
#8 x 3/4”
Zinc
1000
5868
#6 x 3/4”
Antique brass
1000
128
#8 x 3/4”
Zinc
12,000
6163
#6 x 3/4”
Antique brass
5000
6241
#8 x 3/4”
Plain
1000
236
#6 x 3/4”
Antique brass
20,000
3969
#8 x 3/4”
Plain
12,000
6067
#6 x 3/4”
Plain
20,000
7440
#8 x 3/4”
Black
1000
6244
#6 x 3/4”
Plain
5000
6566
#8 x 3/4”
Black
12,000
6239
#6 x 3/4”
Plain
1000
258
#8 x 7/8”
#6 x 3/4”
Nickel
500
Black
Oval Head
10,000
3365
9098
#6 x 3/4”
Nickel
1000
7478
#5 x 5/8”
Antique brass
100
9221
#6 x 3/4”
Nickel
5000
5869
#5 x 5/8”
Antique brass
1000
121
#6 x 3/4”
Nickel
20,000
6157
#5 x 5/8”
Antique brass
5000
7520
#6 x 3/4”
Black
100
238
#5 x 5/8”
Antique brass
30,000
6248
#6 x 3/4”
Black
1000
6088
#6 x 5/8”
Bright brass
1000
5000
6148
#6 x 5/8”
Bright brass
5000
#6 x 5/8”
Bright brass
20,000
No.
Unit # 3748011
No.
7457
Pan
Head
Oval
Head
Flat
Head
Size
#5 x 1/2”
Finish
Flat Head
Zinc
Qty.
100
5781
#5 x 1/2”
Zinc
1000
6126
#5 x 1/2”
Zinc
5000
109
#5 x 1/2”
Zinc
40,000
7466
#5 x 1/2”
Bright brass
100
6136
#5 x 1/2”
Bright brass
1000
6138
#5 x 1/2”
Bright brass
5000
6068
#5 x 1/2”
Bright brass
40,000
7476
#5 x 1/2”
Antique brass
100
5864
#5 x 1/2”
Antique brass
1000
6155
#5 x 1/2”
Antique brass
5000
231
#5 x 1/2”
Antique brass
40,000
7458
#5 x 5/8”
Zinc
100
5782
#5 x 5/8”
Zinc
1000
6127
#5 x 5/8”
Zinc
5000
110
#5 x 5/8”
Zinc
30,000
11325
#5 x 5/8”
Nickel
100
11324
#5 x 5/8”
Nickel
1000
11323
#5 x 5/8”
Nickel
5000
11322
#5 x 5/8”
Nickel
30,000
7477
#5 x 5/8”
Antique brass
100
5865
#5 x 5/8”
Antique brass
1000
6156
#5 x 5/8”
Antique brass
5000
233
#5 x 5/8”
Antique brass
1232
#6 x 1/2”
Zinc
30,000
100
1233
#6 x 1/2”
Zinc
1000
1234
#6 x 1/2”
Zinc
5000
114
#6 x 1/2”
Zinc
25,000
9601
#6 x 1/2”
Bright brass
100
9599
#6 x 1/2”
Bright brass
1000
9598
#6 x 1/2”
Bright brass
5000
9063
#6 x 1/2”
Bright brass
25,000
7479
#6 x 1/2”
Antique brass
100
5866
#6 x 1/2”
Antique brass
1000
6158
#6 x 1/2”
Antique brass
5000
232
#6 x 1/2”
Antique brass
25,000
6237
#6 x 1/2”
Plain
1000
6065
#6 x 1/2”
Plain
25,000
3363
#6 x 1/2”
Nickel
500
8905
#6 x 1/2”
Nickel
1000
120
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
6252
#6 x 3/4”
Black
122
#6 x 3/4”
Black
20,000
640
11658
#6 x 7/8”
Zinc
14,000
7485
#6 x 5/8”
Antique brass
100
7505
#6 x 1”
Zinc
100
5870
#6 x 5/8”
Antique brass
1000
5786
#6 x 1”
Zinc
1000
6160
#6 x 5/8”
Antique brass
5000
123
#6 x 1”
Zinc
13,000
239
#6 x 5/8”
Antique brass
20,000
3366
#6 x 1”
Nickel
500
7489
#6 x 3/4”
9099
#6 x 1”
Nickel
1000
Antique brass
Pan Head
9093
#6 x 1”
Nickel
13,000
294
#8 x 5/8”
7506
#6 x 1-1/4”
Zinc
100
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Bright brass
100
12,000
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
5454
#8 x 2-1/4”
Zinc
3000
50
6029
#8 x 2-1/2”
Plain
500
7723
#8 x 2-1/4”
Zinc
1000
5445
#8 x 2-1/2”
Plain
2500
7323
#8 x 2-1/4”
Zinc
3000
6044
#8 x 2-1/2”
Zinc
500
7768
#8 x 2-1/2”
Plain
50
5896
#8 x 2-1/2”
Zinc
2500
7745
#8 x 2-1/2”
Plain
500
6030
#8 x 3”
Plain
500
7335
#8 x 2-1/2”
Plain
2500
5446
#8 x 3”
Plain
2000
7757
#8 x 2-1/2”
Zinc
50
6045
#8 x 3”
Plain
500
7733
#8 x 2-1/2”
Zinc
500
5897
#8 x 3”
Plain
2000
7324
#8 x 2-1/2”
Zinc
2500
9609
#10 x 3-1/2”
Plain
25
7769
#8 x 3”
Plain
50
9608
#10 x 3-1/2”
Plain
250
7746
#8 x 3”
Plain
500
9484
#10 x 3-1/2”
Plain
1000
7336
#8 x 3”
Plain
2000
9611
#10 x 4”
Plain
25
7758
#8 x 3”
Zinc
25
9610
#10 x 4”
Plain
250
7734
#8 x 3”
Zinc
500
9485
#10 x 4”
Plain
1000
7325
#8 x 3”
Zinc
2000
7747
#10 x 3-1/2”
Plain
250
7760
#8 x 1”
Plain
100
7738
#8 x 1”
Plain
1000
7328
#8 x 1”
Plain
11,000
7749
#8 x 1”
Zinc
100
7717
#8 x 1”
Zinc
1000
7316
#8 x 1”
Zinc
11,000
7762
#8 x 1-1/4”
Plain
100
7739
#8 x 1-1/4”
Plain
1000
7329
#8 x 1-1/4”
Plain
9000
7750
#8 x 1-1/4”
Zinc
100
7718
#8 x 1-1/4”
Zinc
1000
7317
#8 x 1-1/4”
Zinc
9000
7763
#8 x 1-1/2”
Plain
100
7740
#8 x 1-1/2”
Plain
1000
7330
#8 x 1-1/2”
Plain
7000
7751
#8 x 1-1/2”
Zinc
100
9021
#8 x 1”
Zinc
11,000
7719
#8 x 1-1/2”
Zinc
1000
6024
#8 x 1-1/4”
Plain
1000
7318
#8 x 1-1/2”
Zinc
7000
7764
#8 x 1-5/8”
Plain
100
5562
#8 x 1-1/4”
Zinc
1000
7741
#8 x 1-5/8”
Plain
1000
3122
#8 x 1-1/4”
Zinc
9000
7337
#10 x 3-1/2”
Plain
7759
#10 x 3-1/2”
Zinc
25
7736
#10 x 3-1/2”
Zinc
250
1000
7326
#10 x 3-1/2”
Zinc
1000
7748
#10 x 4”
Plain
250
7338
7761
7737
7327
9165
9164
9020
9121
9120
5440
#10 x 4”
#10 x 4”
#10 x 4”
Plain
Zinc
Zinc
#10 x 4”
Zinc
Combo Drive
#8 x 1”
#8 x 1”
#8 x 1”
#8 x 1”
#8 x 1”
#8 x 1-1/4”
Plain
Plain
Plain
Zinc
Zinc
Plain
No.
1000
100
250
1000
100
1000
11,000
100
1000
9000
7720
#8 x 1-5/8”
Plain
6000
6025
#8 x 1-1/2”
Plain
1000
7752
#8 x 1-5/8”
Zinc
100
5441
#8 x 1-1/2”
Plain
7000
7331
#8 x 1-5/8”
Zinc
1000
5563
#8 x 1-1/2”
Zinc
1000
7319
#8 x 1-5/8”
Zinc
6000
3123
#8 x 1-1/2”
Zinc
7000
7765
#8 x 1-3/4”
Plain
100
5564
#8 x 1-5/8”
Plain
1000
7742
#8 x 1-3/4”
Plain
1000
3124
#8 x 1-5/8”
Plain
6000
7332
#8 x 1-3/4”
Plain
5000
6026
#8 x 1-3/4”
Plain
1000
7753
#8 x 1-3/4”
Zinc
100
5442
#8 x 1-3/4”
Plain
5000
7721
#8 x 1-3/4”
Zinc
1000
5565
#8 x 1-3/4”
Zinc
1000
7320
#8 x 1-3/4”
Zinc
5000
5453
#8 x 1-3/4”
Zinc
5000
7766
#8 x 2”
Plain
100
6027
#8 x 2”
Plain
1000
7743
#8 x 2”
Plain
1000
5443
#8 x 2”
Plain
4000
7333
#8 x 2”
Plain
4000
5566
#8 x 2”
Zinc
1000
7755
#8 x 2”
Zinc
100
3125
#8 x 2”
Zinc
4000
7722
#8 x 2”
Zinc
1000
6028
#8 x 2-1/4”
Plain
1000
7322
#8 x 2”
Zinc
4000
5444
#8 x 2-1/4”
Plain
3000
Round Washer Head
Size
Finish
Combo Drive
Qty.
7791
#8 x 1”
Plain
100
7776
#8 x 1”
Plain
1000
7304
#8 x 1”
Plain
11,000
7777
#8 x 1-1/4”
Plain
1000
7306
#8 x 1-1/4”
Plain
9000
7778
#8 x 1-1/2”
Plain
1000
7307
#8 x 1-1/2”
Plain
7000
7779
#8 x 1-5/8”
Plain
1000
7308
#8 x 1-5/8”
Plain
6000
7780
#8 x 1-3/4”
Plain
1000
7309
#8 x 1-3/4”
Plain
5000
7781
#8 x 2”
Plain
1000
7310
#8 x 2”
Plain
4000
7782
#8 x 2-1/4”
Plain
1000
7311
#8 x 2-1/4”
Plain
3000
7783
#8 x 2-1/2”
Plain
500
7312
#8 x 2-1/2”
Plain
2500
7784
#8 x 3”
Plain
500
7313
#8 x 3”
Plain
2000
7785
#9 x 3-1/2”
Plain
250
7314
#9 x 3-1/2”
Plain
1000
Assembly Screws
Surfacing
Products
Sinks
3000
Zinc
Edgebanding
& Veneers
Plain
#8 x 2-1/4”
Adhesives
& Caulk
#8 x 2-1/4”
7756
Decorative
Hardware
7334
1000
Shelving
& Hardware
Flat Head w/ Nibs – Self-Countersinking
No.
Size
Finish
Qty.
Phillips Drive
Zinc
Screws &
Fasteners
Features QuickCutter™ extra-coarse thread pattern for
increased holding power. Does not require pilot hole.
Qty.
#8 x 2-1/4”
No.
Storage &
Convenience
Round Washer Head
Combo Drive
Finish
5567
Wood
Products
Flat Head w/ Nibs
Combo Drive
Size
1000
Cabinet Locks
& Latches
Flat Head w/ Nibs
Phillips Drive
Qty.
Plain
needs!
Abrasives
HARDWOOD ASSEMBLY SCREWS
Finish
#8 x 2-1/4”
121
& Machines
No.
Unit # 3748023
Size
7744
Lighting
Assembly Screws
Assembly Screws
No.
No.
Size
Finish
Square Drive
Qty.
Size
Finish
Qty.
9143
#9 x 2-1/2”
Zinc
50
9134
#9 x 2-1/2”*
Zinc
500
11961
#8 x 1”
Black
100
9012
#9 x 2-1/2”*
Zinc
2500
11954
#8 x 1”
Black
1000
10989
#9 x 3”
Black
50
11946
#8 x 1”
Black
11,000
ASSEMBLY SCREWS
10917
#9 x 3”
Black
1000
7550
#8 x 1”
Zinc
100
Flat Head w/ Nibs
10908
#9 x 3”
Black
2000
12657
#8 x 1”
Zinc
1000
11,000
Unit # 3748001
Phillips
Drive
Square
Drive
Combo
Drive
Self-countersinking. Features smooth shank, Type 17
auger point and Quick$crews® thread pattern.
No.
Size
Finish
Qty.
Phillips Drive
10981
#8 x 1”
Black
100
10909
#8 x 1”
Black
1000
10900
#8 x 1”
Black
11,000
9136
#8 x 1”
Zinc
100
9124
#8 x 1”
Zinc
1000
9005
#8 x 1”
Zinc
11,000
13405
#8 x 1-1/8”
Black
1000
13363
#8 x 1-1/8”
Black
13404
#8 x 1-1/8”
Zinc
10,000
1000
13362
#8 x 1-1/8”
Zinc
10,000
10983
#8 x 1-1/4”
Black
100
10910
#8 x 1-1/4”
Black
1000
10901
#8 x 1-1/4”
Black
9000
9137
#8 x 1-1/4”
Zinc
100
9126
#8 x 1-1/4”
Zinc
1000
9006
#8 x 1-1/4”
Zinc
9000
10911
#8 x 1-1/2”
Black
1000
10902
#8 x 1-1/2”
Black
7000
9138
#8 x 1-1/2”
Zinc
100
9127
#8 x 1-1/2”
Zinc
1000
9007
#8 x 1-1/2”
Zinc
7000
10984
#8 x 1-5/8”
Black
100
10912
#8 x 1-5/8”
Black
1000
10903
#8 x 1-5/8”
Black
6000
9139
#8 x 1-5/8”
Zinc
100
9128
#8 x 1-5/8”
Zinc
1000
9008
#8 x 1-5/8”
Zinc
6000
10985
#8 x 1-3/4”
Black
100
10913
#8 x 1-3/4”
Black
1000
10904
#8 x 1-3/4”
Black
5000
9140
#8 x 1-3/4”
Zinc
100
9129
#8 x 1-3/4”
Zinc
1000
9009
#8 x 1-3/4”
Zinc
5000
10986
#8 x 2”
Black
100
10914
#8 x 2”
Black
1000
10905
#8 x 2”
Black
4000
9141
#8 x 2”
Zinc
100
9131
#8 x 2”
Zinc
1000
9010
#8 x 2”
Zinc
4000
10915
#8 x 2-1/4”
Black
1000
10906
#8 x 2-1/4”
Black
9142
#8 x 2-1/4”
Zinc
3000
100
9132
#8 x 2-1/4”
Zinc
1000
9011
#8 x 2-1/4”
Zinc
10988
#9 x 2-1/2”
Black
50
10916
#9 x 2-1/2”
Black
1000
10907
#9 x 2-1/2”*
Black
2500
122
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
3000
9144
#9 x 3”
Zinc
50
12613
#8 x 1”
Zinc
9135
#9 x 3”*
Zinc
500
13403
#8 x 1-1/8”
Black
1000
9013
#9 x 3”*
Zinc
Combo Drive
2000
13361
#8 x 1-1/8”
Black
10,000
13377
#8 x 1-1/8”
Zinc
1000
7596
#8 x 1”
100
13360
#8 x 1-1/8”
Zinc
10,000
2783
#8 x 1”
Black
1000
11962
#8 x 1-1/4”
Black
100
1246
#8 x 1”
Black
11,000
11955
#8 x 1-1/4”
Black
1000
7585
#8 x 1”
Zinc
100
11947
#8 x 1-1/4”
Black
9000
2477
#8 x 1”
Zinc
1000
7586
#8 x 1-1/4”
Zinc
100
1245
#8 x 1”
Zinc
11,000
12658
#8 x 1-1/4”
Zinc
1000
7597
#8 x 1-1/4”
Black
100
12614
#8 x 1-1/4”
Zinc
9000
2784
#8 x 1-1/4”
Black
1000
11963
#8 x 1-1/2”
Black
100
1249
#8 x 1-1/4”
Black
9000
11956
#8 x 1-1/2”
Black
1000
7551
#8 x 1-1/4”
Zinc
100
11948
#8 x 1-1/2”
Black
7000
2478
#8 x 1-1/4”
Zinc
1000
7587
#8 x 1-1/2”
Zinc
100
1247
#8 x 1-1/4”
Zinc
9000
12659
#8 x 1-1/2”
Zinc
1000
7598
#8 x 1-1/2”
Black
100
12615
#8 x 1-1/2”
Zinc
7000
2785
#8 x 1-1/2”
Black
1000
11964
#8 x 1-5/8”
Black
100
1251
#8 x 1-1/2”
Black
7000
11957
#8 x 1-5/8”
Black
1000
7552
#8 x 1-1/2”
Zinc
100
11949
#8 x 1-5/8”
Black
6000
2482
#8 x 1-1/2”
Zinc
1000
7588
#8 x 1-5/8”
Zinc
100
1250
#8 x 1-1/2”
Zinc
7000
12660
#8 x 1-5/8”
Zinc
1000
7599
#8 x 1-5/8”
Black
100
12616
#8 x 1-5/8”
Zinc
6000
2786
#8 x 1-5/8”
Black
1000
12803
#8 x 1-3/4”
Black
1000
1253
#8 x 1-5/8”
Black
6000
12802
#8 x 1-3/4”
Black
5000
7553
#8 x 1-5/8”
Zinc
100
12661
#8 x 1-3/4”
Zinc
1000
2483
#8 x 1-5/8”
Zinc
1000
12617
#8 x 1-3/4”
Zinc
5000
1252
#8 x 1-5/8”
Zinc
6000
11965
#8 x 2”
Black
100
10481
#8 x 1-3/4”
Black
100
11958
#8 x 2”
Black
1000
10132
#8 x 1-3/4”
Black
1000
11950
#8 x 2”
Black
4000
10115
#8 x 1-3/4”
Black
5000
7589
#8 x 2”
Zinc
100
12801
#8 x 1-3/4”
Zinc
1000
12662
#8 x 2”
Zinc
1000
12800
#8 x 1-3/4”
Zinc
5000
12618
#8 x 2”
Zinc
4000
7600
#8 x 2”
Black
100
12805
#8 x 2-1/4”
Black
1000
2787
#8 x 2”
Black
1000
12804
#8 x 2-1/4”
Black
3000
1255
#8 x 2”
Black
4000
7590
#8 x 2-1/4”
Zinc
100
7554
#8 x 2”
Zinc
100
12663
#8 x 2-1/4”
Zinc
1000
2484
#8 x 2”
Zinc
1000
12619
#8 x 2-1/4”
Zinc
3000
1254
#8 x 2”
Zinc
4000
11966
#9 x 2-1/2”
Black
100
5700
#8 x 2-1/4”
Black
1000
11959
#9 x 2-1/2”
Black
500
5447
#8 x 2-1/4”
Black
3000
11951
#9 x 2-1/2”
Black
2500
7555
#8 x 2-1/4”
Zinc
100
7591
#9 x 2-1/2”
Zinc
50
5580
#8 x 2-1/4”
Zinc
1000
12664
#9 x 2-1/2”*
Zinc
500
5448
#8 x 2-1/4”
Zinc
3000
12620
#9 x 2-1/2”*
Zinc
2500
7602
#9 x 2-1/2”
Black
50
11969
#9 x 3”
Black
100
2788
#9 x 2-1/2”
Black
1000
11960
#9 x 3”
Black
500
1257
#9 x 2-1/2”
Black
2500
11952
#9 x 3”
Black
2000
7556
#9 x 2-1/2”
Zinc
50
7592
#9 x 3”
Zinc
50
2485
#9 x 2-1/2”
Zinc
1000
12665
#9 x 3”*
Zinc
500
1256
#9 x 2-1/2”
Zinc
2500
12621
#9 x 3”*
Zinc
2000
7603
#9 x 3”
Black
50
12666
#10 x 3-1/2”
Zinc
250
2789
#9 x 3”
Black
1000
12622
#10 x 3-1/2”
Zinc
1500
1259
#9 x 3”
Black
2000
12667
#10 x 4”
Zinc
250
7557
#9 x 3”
Zinc
50
12623
#10 x 4”
Zinc
1000
2486
#9 x 3”
Zinc
1000
1258
#9 x 3”
Zinc
2000
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Black
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
*#9 body with #8 head.
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
1000
12525
#8 x 1-5/8”
Zinc
1000
Zinc
5000
5876
#8 x 1-5/8”
Zinc
5000
7525
#8 x 2”
Black
100
7580
#8 x 1-3/4”
Black
100
ASSEMBLY SCREWS
5802
#8 x 2”
Black
1000
5831
#8 x 1-3/4”
Black
1000
Flat Head
4736
#8 x 2”
Black
4000
187
#8 x 1-3/4”
Black
5000
7538
#8 x 2”
Plain
100
7608
#8 x 1-3/4”
Plain
100
5577
#8 x 2”
Plain
1000
12526
#8 x 1-3/4”
Zinc
1000
3974
#8 x 2”
Plain
4000
4957
#8 x 1-3/4”
Zinc
5000
7514
#8 x 2”
Zinc
100
7581
#8 x 2”
Black
100
5795
#8 x 2”
Zinc
1000
5832
#8 x 2”
Black
1000
Unit # 3748005
Phillips
Drive
Square
Drive
No.
Size
Finish
Phillips Drive
Qty.
133
#8 x 2”
Zinc
4000
188
#8 x 2”
Black
4000
11273
#8 x 2-1/4”
Black
1000
12527
#8 x 2”
Zinc
1000
4000
8995
#7 x 5/8”
Zinc
20,000
7126
#8 x 2-1/4”
Black
3000
4958
#8 x 2”
Zinc
9185
#8 x 5/8”
Black
100
12808
#8 x 2-1/4”
Plain
1000
7610
#8 x 2-1/4”
Plain
100
7508
#8 x 5/8”
Zinc
100
12806
#8 x 2-1/4”
Zinc
1000
13415
#8 x 2-1/4”
Zinc
1000
7532
#8 x 3/4”
Plain
100
7526
#8 x 2-1/2”
Black
50
6906
#8 x 2-1/4”
Zinc
3000
7509
#8 x 3/4”
Zinc
100
5803
#8 x 2-1/2”
Black
1000
5834
#8 x 2-1/2”
Black
1000
7521
#8 x 1”
Black
100
4746
#8 x 2-1/2”
Black
2500
189
#8 x 2-1/2”
Black
2500
5798
#8 x 1”
Black
1000
7539
#8 x 2-1/2”
Plain
50
12528
#8 x 2-1/2”
Zinc
500
4732
#8 x 1”
Black
10,000
5578
#8 x 2-1/2”
Plain
500
4959
#8 x 2-1/2”
Zinc
2500
7533
#8 x 1”
Plain
100
3975
#8 x 2-1/2”
Plain
2500
5835
#8 x 3”
Black
1000|
5572
#8 x 1”
Plain
1000
5796
#8 x 2-1/2”
Zinc
500
190
#8 x 3”
Black
2000
3970
#8 x 1”
Plain
10,000
134
#8 x 2-1/2”
Zinc
2500
7613
#8 x 3”
Plain
50
7510
#8 x 1”
Zinc
100
5578
#8 x 2-3/4”
Plain
500
12529
#8 x 3”
Zinc
500
5791
#8 x 1”
Zinc
1000
13097
#8 x 2-3/4”
Plain
2000
4960
#8 x 3”
Zinc
2000
129
#8 x 1”
Zinc
10,000
7527
#8 x 3”
Black
50
6254
#9 x 1-1/4”
Plain
1000
7522
#8 x 1-1/4”
Black
100
5804
#8 x 3”
Black
1000
5778
#9 x 1-1/4”
Plain
8000
5799
#8 x 1-1/4”
Black
1000
4747
#8 x 3”
Black
2000
6596
#9 x 1-1/2”
Plain
1000
4733
#8 x 1-1/4”
Black
9000
7541
#8 x 3”
Plain
50
6563
#9 x 1-1/2”
Plain
4000
7534
#8 x 1-1/4”
Plain
100
5579
#8 x 3”
Plain
500
6255
#9 x 1-3/4”
Plain
1000
5573
#8 x 1-1/4”
Plain
1000
3976
#8 x 3”
Plain
2000
6256
#9 x 2”
Plain
1000
3971
#8 x 1-1/4”
Plain
9000
7516
#8 x 3”
Zinc
50
4399
#9 x 2”
Plain
3000
7511
#8 x 1-1/4”
Zinc
100
5797
#8 x 3”
Zinc
500
7582
#9 x 2-1/2”
Black
50
5792
#8 x 1-1/4”
Zinc
1000
135
#8 x 3”
Zinc
2000
11194
#8 x 2-1/4”
Black
1000
130
#8 x 1-1/4”
Zinc
9000
7548
50
6257
#9 x 2-1/2”
Plain
500
7523
#8 x 1-1/2”
Black
100
5874
#9 x 2-1/2”
Plain
2500
5800
#8 x 1-1/2”
Black
1000
13412
#6 x 3/4”
Black
100
7583
#9 x 3”
Black
50
7975
#8 x 1-1/2”
Black
7000
13413
#6 x 3/4”
Black
1000
6597
#9 x 3”
Plain
500
7535
#8 x 1-1/2”
Plain
100
13414
#6 x 3/4”
Black
5000
6564
#8 x 1-1/2”
Plain
1000
7575
#8 x 3/4”
Black
100
#9 x 3”
Plain
Combo Drive
2000
5574
3972
#8 x 1-1/2”
Plain
7000
7604
#8 x 3/4”
Plain
100
6093
#8 x 1”
Plain
1000
7512
#8 x 1-1/2”
Zinc
100
7576
#8 x 1”
Black
100
9815
#8 x 1”
Plain
10,000
5793
#8 x 1-1/2”
Zinc
1000
5828
#8 x 1”
Black
1000
6094
#8 x 1-1/4”
Plain
1000
131
#8 x 1-1/2”
Zinc
7000
179
#8 x 1”
Black
10,000
9816
#8 x 1-1/4”
Plain
9000
11198
#8 x 1-5/8”
Black
1000
7605
#8 x 1”
Plain
100
6095
#8 x 1-1/2”
Plain
1000
10564
#8 x 1-5/8”
Black
5000
12522
#8 x 1”
Zinc
1000
9817
#8 x 1-1/2”
Plain
7000
7536
#8 x 1-5/8”
Plain
100
4954
#8 x 1”
Zinc
10,000
6096
#8 x 1-3/4”
Plain
1000
5575
#8 x 1-5/8”
Plain
1000
7578
#8 x 1-1/4”
Black
100
9818
#8 x 1-3/4”
Plain
5000
4426
#8 x 1-5/8”
Plain
5000
5829
#8 x 1-1/4”
Black
1000
6097
#8 x 2”
Plain
1000
7809
#8 x 1-5/8”
Zinc
1000
185
#8 x 1-1/4”
Black
9000
9819
#8 x 2”
Plain
4000
7125
#8 x 1-5/8”
Zinc
5000
7606
#8 x 1-1/4”
Plain
100
9098
#8 x 2-1/4”
Plain
1000
7524
#8 x 1-3/4”
Black
100
12523
#8 x 1-1/4”
Zinc
1000
9820
#8 x 2-1/4”
Plain
3000
5801
#8 x 1-3/4”
Black
1000
4955
#8 x 1-1/4”
Zinc
9000
6099
#8 x 2-1/2”
Plain
500
4735
#8 x 1-3/4”
Black
5000
5830
#8 x 1-1/2”
Black
1000
9821
#8 x 2-1/2”
Plain
2500
7537
#8 x 1-3/4”
Plain
100
186
#8 x 1-1/2”
Black
7000
6101
#8 x 3”
Plain
500
5576
#8 x 1-3/4”
Plain
1000
7607
#8 x 1-1/2”
Plain
100
9822
#8 x 3”
Plain
2000
3973
#8 x 1-3/4”
Plain
5000
12524
#8 x 1-1/2”
Zinc
1000
#9 x 2-1/2”
Plain
Square Drive
123
Surfacing
Products
Sinks
Zinc
#8 x 1-3/4”
Edgebanding
& Veneers
#8 x 1-3/4”
132
Adhesives
& Caulk
5794
Decorative
Hardware
7000
Qty.
Zinc
Shelving
& Hardware
Finish
#8 x 1-1/2”
Screws &
Fasteners
Size
4956
Storage &
Convenience
No.
100
Wood
Products
Qty.
Zinc
Lighting
Finish
#8 x 1-3/4”
Cabinet Locks
& Latches
No.
Abrasives
Size
7513
& Machines
Assembly Screws
Assembly Screws
Size
Qty.
No.
Size
Thread
Finish
Qty.
6468
#8 x 1-1/8”
9000
13004
#7 x 1”
Coarse
Plain
10,000
6587
#8 x 1-1/4”
1000
7620
#7 x 1-1/4”
100
#8 x 1-1/4”
9000
Mod.
Quick$crews
Plain
2288
13650
Mod.
#7 x 1-1/4”
Quick$crews
Zinc
100
5598
#7 x 1-1/4”
Coarse
Plain
1000
4080
#7 x 1-1/4”
Coarse
Plain
8000
7622
#7 x 1-1/4”
Hi-Lo
Plain
100
5600
#7 x 1-1/4”
Hi-Lo
Plain
1000
4084
#7 x 1-1/4”
Hi-Lo
Plain
8000
13416
#7 x 1-1/4”
Coarse
Zinc
1000
12088
#7 x 1-1/4”
Coarse
Zinc
8000
13654
#7 x 1-1/4”
Hi-Lo
Zinc
100
13619
#7 x 1-1/4”
Hi-Lo
Zinc
1000
13575
#7 x 1-1/4”
Hi-Lo
Zinc
8000
7621
#7 x 1-1/2”
Mod.
Quick$crews
Plain
100
13687
#7 x 1-1/2”
Mod.
Quick$crews
Zinc
100
13651
#7 x 1-1/2”
Mod.
Quick$crews
Zinc
Yellow
100
No.
6588
#8 x 1-1/2”
1000
ASSEMBLY SCREWS
6469
#8 x 1-1/2”
7000
Flat Head w/ Nibs – Combo Drive
6589
#8 x 1-3/4”
1000
6107
#8 x 1-3/4”
5000
6590
#8 x 2”
1000
248
#8 x 2”
4000
6591
#8 x 2-1/4”
1000
7206
#8 x 2-1/4”
3000
6592
#8 x 2-1/2”
500
6471
#8 x 2-1/2”
2500
6593
#8 x 3”
500
6473
#8 x 3”
2000
Unit # 3748064
#2 drive size.
Size
Finish
Qty.
7558
No.
#8 x 1-1/4”
Zinc
100
7567
#8 x 1-1/4”
Plain
100
7560
#8 x 1-1/2”
Zinc
100
7568
#8 x 1-1/2”
Plain
100
7561
#8 x 1-5/8”
Zinc
100
7562
#8 x 1-3/4”
Zinc
100
7569
#8 x 1-3/4”
Plain
100
7563
#8 x 2”
Zinc
100
7570
#8 x 2”
Plain
100
7564
#8 x 2-1/4”
Zinc
100
7571
#8 x 2-1/4”
Plain
100
7565
#8 x 2-1/2”
Zinc
50
7572
#8 x 2-1/2”
Plain
50
5599
#7 x 1-1/2”
Coarse
Plain
1000
7566
#8 x 3”
Zinc
50
4081
#7 x 1-1/2”
Coarse
Plain
7000
7623
#7 x 1-1/2”
Hi-Lo
Plain
100
ASSEMBLY SCREWS
5601
#7 x 1-1/2”
Hi-Lo
Plain
1000
Round Washer Head
4085
#7 x 1-1/2”
Hi-Lo
Plain
7000
13423
#7 x 1-1/2”
Coarse
Zinc
1000
13265
#7 x 1-1/2”
Coarse
Zinc
7000
1000
Unit # 3748019
FACE FRAME / POCKET HOLE
ASSEMBLY SCREWS
Unit # 3748017
Pan Head
Square Drive
Square
Drive
Combo
Drive
Features Quick$crews® thread pattern for increased
holding power with reduced “spin out” and “pull out”.
Zinc finish.
No.
Size
Qty.
Square Drive
13313
#8 x 1”
1000
13406
#8 x 1-1/8”
1000
13314
#8 x 1-1/4”
1000
13315
#8 x 1-1/2”
1000
13316
#8 x 1-5/8”
1000
13317
#8 x 1-3/4”
1000
Pan Head
Phillips Drive
Round Washer Head
Square Drive
Type 17 point.
No.
Size
Thread
Finish
Pan Head – Square Drive
Qty.
11817
#6 x 1”
Fine
Plain
1000
13003
#6 x 1”
Fine
Plain
10,000
7616
#6 x 1-1/4”
Fine
Plain
100
3655
#6 x 1-1/4”
Fine
Plain
1000
2722
#6 x 1-1/4”
Fine
Plain
8000
7618
#6 x 1-1/4”
QuickCutter
Plain
100
5706
#6 x 1-1/4”
QuickCutter
Plain
1000
4082
#6 x 1-1/4”
QuickCutter
Plain
8000
13652
#6 x 1-1/4”
Fine
Zinc
100
13617
#7 x 1-1/2”
Coarse
Zinc
Yellow
13573
#7 x 1-1/2”
Coarse
Zinc
Yellow
7000
13655
#7 x 1-1/2”
Hi-Lo
Zinc
Yellow
100
13620
#7 x 1-1/2”
Hi-Lo
Zinc
Yellow
1000
13576
#7 x 1-1/2”
7614
#6 x 1-1/4”
Fine
Plain
100
5963
#6 x 1-1/4”
Fine
Plain
1000
5715
#6 x 1-1/4”
Fine
Plain
8000
7615
#6 x 1-1/2”
Fine
Plain
100
5964
#6 x 1-1/2”
Fine
Plain
1000
5716
#6 x 1-1/2”
Fine
Plain
7000
5706
#6 x 1-1/4”
QuickCutter
Plain
1000
Zinc
Yellow
Hi-Lo
7000
13318
#8 x 2”
1000
13419
#6 x 1-1/4”
Fine
Zinc
1000
13319
#8 x 2-1/4”
1000
11523
#6 x 1-1/4”
Fine
Zinc
8000
7617
#6 x 1-1/2”
Fine
Plain
100
3656
#6 x 1-1/2”
Fine
Plain
1000
2724
#6 x 1-1/2”
Fine
Plain
7000
9161
#7 x 1-1/4”
Fine
Plain
100
7619
#6 x 1-1/2”
Quickcutter
Plain
100
9158
#7 x 1-1/4”
Fine
Plain
1000
5707
#6 x 1-1/2”
QuickCutter
Plain
1000
5285
#7 x 1-1/4”
Fine
Plain
8000
5215
#6 x 1-1/2”
QuickCutter
Plain
7000
9162
#7 x 1-1/2”
Fine
Plain
100
Fine
Zinc
Yellow
100
9159
#7 x 1-1/2”
Fine
Plain
1000
5286
#7 x 1-1/2”
Fine
Plain
6000
Fine
Zinc
Yellow
1000
9156
#8 x 1”
Coarse
Plain
100
9155
#8 x 1”
Coarse
Plain
1000
#6 x 1-1/2”
Fine
Zinc
Yellow
6308
#8 x 1”
Coarse
11820
#7 x 1”
Mod.
Quick$crews
Plain
11818
#7 x 1”
Coarse
11819
#7 x 1”
Coarse
13320
13321
#8 x 2-1/2”
#8 x 3”
Square Drive – Type 17 Point
500
500
13291
#8 x 1”
10,000
13364
#8 x 1-1/8”
9000
13292
#8 x 1-1/4”
9000
13293
#8 x 1-1/2”
7000
13295
#8 x 1-3/4”
5000
13296
#8 x 2”
4000
13297
#8 x 2-1/4”
3000
13298
13299
#8 x 2-1/2”
#8 x 3”
Combo Drive
2500
13653
13618
13574
#6 x 1-1/2”
#6 x 1-1/2”
2000
6585
#8 x 1”
1000
2759
#8 x 1”
10,000
6586
#8 x 1-1/8”
1000
124
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
7000
4802
#6 x 1-1/4” QuickCutter
Plain
8000
Round Washer Head – Square Drive
Plain
8000
Plain
100
100
7845
Mod.
#8 x 1-1/4”
Quick$crews
Plain
100
7844
#8 x 1-1/4”
Coarse
Plain
1000
Plain
1000
4547
#8 x 1-1/4”
Coarse
Plain
8000
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Size
Finish
Qty.
No.
Size
Finish
Qty.
10253
#8 x 1-1/4”
Zinc
6000
5213
#8 x 7/16”
Zinc
20,000
10472
#8 x 1-1/2”
Zinc
100
10380
#8 x 1/2”
Zinc
600
10471
#8 x 1-1/2”
Zinc
1000
6271
#8 x 1/2”
Zinc
1000
5000
6113
#8 x 1/2”
Zinc
9157
#8 x 1-1/2”
Coarse
Plain
1000
10032
#8 x 1-1/2”
Coarse
Plain
7000
10254
11998
Mod.
#8 x 2-1/2”
Quick$crews
Plain
50
11997
#8 x 2-1/2”
Mod.
Quick$crews
Plain
500
*Fine Thread QuickCutter™
Drawer Front & Slide Screws
Unit # 3748014
DRAWER FRONT ADJUSTING
SCREWS
1000
#8 x 7/8”
Zinc
12624
#8 x 7/8”
Zinc
8000
10284
#6 x 7/16”
Black
1000
12669
#8 x 1”
Zinc
1000
5873
#6 x 5/8”
Antique Brass
1000
12625
#8 x 1”
Zinc
7000
4635
#6 x 5/8”
Antique Brass
15,000
12670
#8 x 1-1/8”
Zinc
1000
10474
#8 x 7/16”*
Black
100
12626
#8 x 1-1/8”
Zinc
6000
10473
#8 x 7/16”*
Black
5000
12671
#8 x 1-1/4”
Zinc
1000
10123
#8 x 7/16”*
Black
20,000
12627
#8 x 1-1/4”
Zinc
6000
5961
#8 x 7/16”*
Zinc
1000
12672
#8 x 1-1/2”
Zinc
1000
6276
#8 x 7/16”*
Zinc
12628
#8 x 1-1/2”
Zinc
5000
4460
#8 x 7/16”*
Zinc
Truss Head – Combo Drive
DRAWER SLIDE SCREWS
10457
#8 x 7/16”*
Black
100
10456
#8 x 7/16”*
Black
1000
10455
#8 x 7/16”*
Black
5000
10256
#8 x 7/16”*
Black
20,000
10454
#8 x 7/16”*
Zinc
100
#8 x 7/16”*
Zinc
1000
No.
Size
Qty.
10453
11801
#6 x 7/16”
100
10452
#8 x 7/16”*
Zinc
5000
10255
#8 x 7/16”*
Zinc
20,000
11800
#6 x 7/16”
1000
8811
#8 x 7/8”
Zinc
1000
11799
#6 x 7/16”
5000
8296
#8 x 7/8”
Zinc
8000
13355
#6 x 7/16”
25,000
6003
#8 x 1”
Zinc
1000
13397
#6 x 1/2”
100
#6 x 1/2”
1000
#8 x 1”
Zinc
7000
6004
#8 x 1-1/8”
Zinc
1000
13399
#6 x 1/2”
5000
2757
#8 x 1-1/8”
Zinc
6000
13356
#6 x 1/2”
25,000
6005
#8 x 1-1/4”
Zinc
1000
#8 x 1-1/4”
Zinc
Phillips Drive – Type 17 Point
6000
* #6 head on #8 body.
Unit # 3748052
13398
4103
5000
20,000
DRAWER SLIDE SCREWS
Surfacing
Products
Screws &
Fasteners
Qty.
5000
14,000
12668
Low-profile head for use with ball
bearing
drawer
slides.
Quick$crews® thread pattern. Zinc
finish.
Combo
Drive
Size
Finish
Phillips Drive
#8 x 1/2”
Zinc
Unit # 3748021
DRAWER SLIDE SCREWS
Full-Extension
9147
#8 x 7/8”
Zinc
1000
9022
#8 x 7/8”
Zinc
8000
12333
#8 x 1”
Black
100
Low profile design with Type AB point. #6 x 7/16” size.
Zinc finish.
No.
Qty.
12332
#8 x 1”
Black
1000
12799
12798
8674
#8 x 1”
Black
7000
9148
#8 x 1”
Zinc
1000
9023
#8 x 1”
Zinc
7000
9149
#8 x 1-1/8”
Zinc
1000
9024
#8 x 1-1/8”
Zinc
6000
9150
#8 x 1-1/4”
Zinc
1000
9025
#8 x 1-1/4”
Zinc
6000
9568
#8 x 1-1/2”
Zinc
1000
9532
#8 x 1-1/2”
Zinc
Combo Drive
5000
1000
5000
Unit # 3748033
Round Washer Head
Phillips Drive
Truss Head
Phillips Drive
Truss Head
Combo Drive
DRAWER SLIDE SCREWS
Lighting
Pan Head
Phillips Drive
Storage &
Convenience
No.
4688
Unit # 3748010
Large Round Washer Head
Phillips
Drive
#8 x 1-1/2”
Zinc
Combo Drive – Type 17 Point
Edgebanding
& Veneers
100
Adhesives
& Caulk
Plain
Decorative
Hardware
9160
No.
Shelving
& Hardware
Qty.
Wood
Products
Finish
Mod.
#8 x 1-1/2”
Quick$crews
10459
#8 x 7/8”
Zinc
100
10458
#8 x 7/8”
Zinc
1000
7200
#8 x 7/8”
Zinc
8000
10466
#8 x 1”
Zinc
100
10465
#8 x 1”
Zinc
1000
9989
#8 x 1”
Zinc
7000
For use with full-extension ball bearing slides. Coarse
Quick$crews® thread pattern provides increased holding power while reducing “spin out” and “pull out”.
No.
Size
Finish
Qty.
10468
#8 x 1-1/8”
Zinc
100
11572
10467
#8 x 1-1/8”
Zinc
1000
10252
#8 x 1-1/8”
Zinc
6000
9123
#8 x 7/16”
Zinc
100
10470
#8 x 1-1/4”
Zinc
100
8810
#8 x 7/16”
Zinc
1000
10469
#8 x 1-1/4”
Zinc
1000
9122
#6 x 7/16”
Zinc
30,000
Round Washer Head – Phillips Drive
#8 x 7/16”
Zinc
5000
Low-profile head for use with ball bearing drawer
slides. Type AB point. #8 x 7/16” size.
No.
Finish
Qty.
11547
Zinc
11545
Zinc
5000
229
Zinc
20,000
11551
Black
1000
11550
Black
5000
11549
Black
20,000
11555
Zinc with White Head
1000
11554
5000
11553
20,000
1000
125
Cabinet Locks
& Latches
Thread
Abrasives
Size
& Machines
No.
Sinks
Drawer Front & Slide Screws
Drawer Slide & Cabinet Installation Screws
No.
6142
Unit # 3748036
DRAWER SLIDE SCREWS
Undercut Flat Head – Phillips Drive
Size
Finish
Qty.
#6 x 5/8”
Bright brass
1000
No.
Size
mm
Finish
Qty.
6.3 x 11.5
Nickel
10,000
6145
#6 x 5/8”
Bright brass
5000
226
6060
#6 x 5/8”
Bright brass
25,000
6020
6.3 x 13
Nickel
1000
7465
#6 x 3/4”
Zinc
100
227
6.3 x 13
Nickel
10,000
6131
#6 x 3/4”
Zinc
1000
11736
6.3 x 14.5
Nickel
100
5000
11738
6.3 x 18
Nickel
100
20,000
11740
6.3 x 20
Nickel
100
6.3 x 25
Nickel
1000
6.3 x 25
Nickel
Square Drive
5000
6135
6058
#6 x 3/4”
Zinc
#6 x 3/4”
Zinc
6143
#6 x 3/4”
Bright brass
1000
6021
6146
#6 x 3/4”
Bright brass
5000
1219
6061
#6 x 3/4”
Bright brass
20,000
13323
#7 x 5/8”
Zinc
1000
12846
#7 x 5/8”
Zinc
20,000
13400
6.3 x 10
Zinc
1000
13401
6.3 x 11.5
Zinc
1000
Unit # 3748032
*#6 body with #5 head.
Drawer Slide & Cabinet Installation Screws
Unit # 3468233
Seats flush in countersink holes and eliminates clicking
during operation in European drawer slides.
No.
7367
Size
Finish
Standard Point
#6 x 7/16”*
Zinc
Qty.
100
7366
#6 x 7/16”*
Zinc
1000
7365
#6 x 7/16”*
Zinc
5000
6319
#6 x 7/16”*
Zinc
35,000
9587
#6 x 1/2”*
Black
1000
9586
#6 x 1/2”*
Black
5000
8681
#6 x 1/2”*
Black
25,000
CONNECTING SCREWS
SYSTEM SCREWS
For 5mm diameter holes. Features #2 POZI
drive and nickel finish.
No. JUL-6621150. Features special 7mm
diameter head.
No. JUL-6681450EH. Replacement screw
for mounting plates.
Lgth.
No.
mm
7356
#6 x 1/2”*
Zinc
100
JUL-6611150
7353
#6 x 1/2”*
Zinc
1000
JUL-6611300
Flat Head – Pozi Drive – Confirmat
Creates tight fitting joint between panels and provides greater pull-out resistance for strong hold. Zinc finish.
Note: Requires pre-drilled pilot hole
for most applications.
No.
Size
mm
With Hole
Qty.
11.5
13
11732
5 x 40
100
11700
5 x 40
5000
7350
#6 x 1/2”*
Zinc
5000
JUL-6611450
14.5
7229
#6 x 1/2”*
Zinc
25,000
JUL-6612000
20
25
30
7357
#6 x 5/8”*
Zinc
100
JUL-6612500
7354
#6 x 5/8”*
Zinc
1000
JUL-6613000
7351
#6 x 5/8”*
Zinc
5000
JUL-6621150
11.5
7230
#6 x 5/8”*
Zinc
25,000
JUL-6681450EH
14.5
7358
#6 x 3/4”*
Zinc
100
7355
#6 x 3/4”*
Zinc
1000
7352
#6 x 3/4”*
Zinc
7231
#6 x 3/4”*
Zinc
Type 17 Point
7459
#6 x 7/16”
Zinc
100
6128
#6 x 7/16”
Zinc
1000
6132
#6 x 7/16”
Zinc
5000
6055
#6 x 7/16”
Zinc
35,000
6129
#6 x 1/2”
Zinc
1000
6133
#6 x 1/2”
Zinc
5000
6056
#6 x 1/2”
Zinc
25,000
6152
#6 x 1/2”
Antique brass
1000
6164
#6 x 1/2”
Antique brass
5000
6062
#6 x 1/2”
Antique brass
25,000
13402
6.3 x 10
7468
#6 x 1/2”
Bright brass
100
13301
6141
#6 x 1/2”
Bright brass
1000
6022
6144
#6 x 1/2”
Bright brass
5000
13302
6059
#6 x 1/2”
Bright brass
25,000
13479
6130
#6 x 5/8”
Zinc
1000
13478
6.3 x 14.5
6134
#6 x 5/8”
Zinc
5000
13463
6057
#6 x 5/8”
Zinc
25,000
6153
#6 x 5/8”
Antique brass
1000
1220
6.3 x 10
Nickel
1000
6165
#6 x 5/8”
Antique brass
5000
6181
6.3 x 10.5
Nickel
1000
6063
#6 x 5/8”
Antique brass
25,000
5268
6.3 x 10.5
Nickel
10,000
7470
#6 x 5/8”
Bright brass
100
6019
6.3 x 11.5
Nickel
1000
225
7 x 50
2000
With Hole and Nibs
6265
7 x 50
100
5361
7 x 50
2000
With Hole, Nibs and Sharp Point
Unit # 3748022
13720
5 x 50
6266
7 x 50
4000
100
5502
7 x 50
2000
5000
Unit # 3748018
126
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
20,000
CABINET INSTALLATION SCREWS
Round Washer Head – QuickCutter™
DRAWER SLIDE SCREWS
European Style – Flat Head
Phillips
Drive
Pozi
Drive
Phillips Drive
Square
Drive
For installing European drawer slide cabinet members
into cabinets with 32mm boring pattern.
Size
No.
mm
Finish
Qty.
Phillips Drive
Combo Drive
No.
Size
Finish
Phillips Drive
Qty.
Zinc
1000
6.3 x 11.5
Zinc
10,000
9449
#14 x 2-1/2”
Zinc
100
6.3 x 13
Nickel
1000
8214
#14 x 2-1/2”
Zinc
1500
6.3 x 13
Zinc
10,000
11979
#14 x 2-1/2”
6.3 x 14.5
Zinc
100
11981
#14 x 2-1/2”
Black
Zinc
1000
9450
#14 x 3”
Zinc
100
6.3 x 14.5
Zinc
Pozi Drive
8000
8215
#14 x 3”
Zinc
1200
11980
#14 x 3”
11982
#14 x 3”
Black
9451
#14 x 3-1/2”
Zinc
50
8216
#14 x 3-1/2”
Zinc
1000
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Zinc w/ white head 1500
1500
1200
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Zinc
50
#14 x 4”
Zinc
Combo Drive
700
8336
#10 x 2-1/2”
Zinc
50
8335
#10 x 2-1/2”
Zinc
500
7927
#10 x 2-1/2”
Zinc
1500
8344
#10 x 2-1/2”
Zinc w/ white head
50
8343
#10 x 2-1/2”
8010
#10 x 2-1/2”
8338
#10 x 3”
Zinc
50
8337
#10 x 3”
Zinc
500
7935
#10 x 3”
Zinc
1500
8346
#10 x 3”
Zinc w/ white head
50
8345
#10 x 3”
8011
#10 x 3”
13794
#10 x 3”
Zinc w/ sand head 1500
Flat Head w/ Nibs
Round Washer Head
Sinks
#14 x 4”
8217
INSTALLATION SCREWS
Phillips Drive
Edgebanding
& Veneers
9452
Unit # 3748030
INSTALLATION SCREWS
Square Drive
For use in light or medium-gauge metal studs. Sheet
metal thread pattern with self-drilling point.
No.
Size
Finish
Qty.
Phillips Drive
Phillips
Drive
Combo
Drive
For use in cabinet installations. Features #8 head size,
Quick$crews® thread pattern and Type 17 point.
No.
Size
Finish
Qty.
Combo Drive
13380
#8 x 2-1/2”
Zinc
500
13349
#8 x 2-1/2”
Zinc
2500
13381
#8 x 2-1/2”
Zinc w/ white head
500
#9 x 2-1/2”
Zinc yellow
50
13350
#8 x 2-1/2”
Zinc w/ white head
2500
8340
#10 x 3-1/2”
Zinc
25
11413
8339
#10 x 3-1/2”
Zinc
250
11412
#9 x 2-1/2”
Zinc yellow
500
12330
#14 x 3”
Zinc
100
7936
#10 x 3-1/2”
Zinc
1000
5250
#9 x 2-1/2”
Zinc yellow
2500
11976
1000
8348
#10 x 3-1/2”
Zinc w/ white head
25
11415
#9 x 3”
Zinc yellow
500
#14 x 3”
Zinc
Square Drive
8347
#10 x 3-1/2”
11414
#9 x 3”
Zinc yellow
50
#10 x 3-1/2”
8342
#10 x 4”
Zinc
5251
25
8341
#10 x 4”
Zinc
250
7937
#10 x 4”
Zinc
1000
10512
#9 x 3”
Zinc yellow
Phillips Drive
#8 x 2-1/4”
Zinc
2000
3000
Unit # 3748039
8353
#10 x 4”
Zinc w/ white head
8351
#10 x 4”
8013
#10 x 4”
Installation Screws
25
INSTALLATION SCREWS
Bugle Head – Phillips Drive – Twinfast
#8 x 2-1/2”
Zinc
500
13351
#8 x 2-1/2”
Zinc
2500
13383
#8 x 2-1/2”
Zinc w/ white head
500
13352
#8 x 2-1/2”
Zinc w/ white head
2500
13382
#10 x 2-1/2”
Zinc
500
13395
#10 x 2-1/2”
Zinc
2000
13354
#10 x 2-1/2”
Zinc w/ white head
500
13396
#10 x 2-1/2”
Zinc w/ white head
2000
Unit # 3748034
Screws &
Fasteners
8012
13382
Adhesives
& Caulk
Qty.
Decorative
Hardware
Finish
Size
Shelving
& Hardware
No.
Surfacing
Products
Installation Screws
Unit # 3748035
INSTALLATION SCREWS
Truss Head – Phillips Drive – Twinfast
For frame to frame cabinet attachment applications.
Type 17 point. Half threaded design with black finish.
#8 x 2-1/2” size.
No.
Qty.
10485
50
10484
500
10130
2500
No.
Qty.
11282
100
2052
1000
Unit # 3748055
Unit # 3748028
Wood
Products
Unit # 3748053
INSTALLATION SCREWS
Lighting
For use in wood studs. Features sheet
metal thread pattern with Type 17 auger
point. Zinc finish. #14 x 3” size.
Storage &
Convenience
For use in light or medium gauge metal
studs. Features sheet metal thread pattern with self-drilling point. #10 x 2-1/2”
size.
No.
Finish
Qty.
13106
Zinc
500
13103
Zinc
2000
13107
Zinc w/ sand head
500
13104
Zinc w/ sand head
2000
No.
Size
Finish
13108
Zinc w/ white head
500
13099
#8 x 2-1/2”
13105
Zinc w/ white head
2000
13101
#8 x 2-1/2”
13408
#8 x 3”
13100
#8 x 3”
13102
#8 x 3”
Zinc
1500
For use in wood and light-gauge metal studs. Finer
thread pattern prevents splitting. Black finish.
Note: Pre-drilling pilot hole is recommended.
No.
Finish
13165
Zinc
500
Qty.
13162
Zinc
2000
Black
2000
13167
Zinc w/ sand head
500
Zinc
2000
13164
Zinc w/ sand head
2000
Black
500
13166
Zinc w/ white head
500
Black
1500
13163
Zinc w/ white head
2000
Qty.
127
Abrasives
INSTALLATION SCREWS
Round Washer Head – Combo Drive –
Twinfast
& Machines
For use in wood and light gauge metal studs. #8 x
2-1/2” size.
Cabinet Locks
& Latches
INSTALLATION SCREWS
Powerhead Screws
Powerhead Screws
128
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
M4 x 25mm
100
10891
M4 x 25mm
7000
Truss Head – Phillips/Slotted Drive
10951
M4 x 30mm
100
10892
M4 x 30mm
6500
10952
M4 x 35mm
100
10893
M4 x 35mm
5000
10953
M4 x 38mm
100
10894
M4 x 38mm
4000
10954
M4 x 40mm
100
10895
M4 x 40mm
5000
10955
M4 x 45mm
100
10896
M4 x 45mm
4000
10956
M4 x 50mm
100
10897
Machine & Knob Screws
M4 x 50mm
3000
Size
Standard
Qty.
1205
#8-32 x 3/8”
100
1191
#8-32 x 3/8”
1000
307
#8-32 x 3/8”
16,000
1206
#8-32 x 1/2”
100
1192
#8-32 x 1/2”
1000
308
#8-32 x 1/2”
14,000
1207
#8-32 x 5/8”
100
1193
#8-32 x 5/8”
1000
Unit # 3748037
KNOB SCREWS
Round Washer Head – Phillips/Slotted Drive
For use with wooden knobs. Type B thread. Zinc finish.
No.
Size
Qty.
309
#8-32 x 5/8”
12,000
9234
#12 x 1”
1208
#8-32 x 3/4”
100
9228
100
#12 x 1”
1000
1194
#8-32 x 3/4”
1000
7117
#12 x 1”
310
#8-32 x 3/4”
10,000
9235
#12 x 1-1/4”
5000
50
#12 x 1-1/4”
500
3000
1209
#8-32 x 7/8”
100
9229
1195
#8-32 x 7/8”
1000
7118
#12 x 1-1/4”
#12 x 1-1/2”
50
8500
1210
#8-32 x 1”
100
9230
#12 x 1-1/2”
500
1196
#8-32 x 1”
1000
7119
#12 x 1-1/2”
3000
312
#8-32 x 1”
7000
9237
#12 x 1-3/4”
50
#12 x 1-3/4”
500
#12 x 1-3/4”
2000
311
1211
#8-32 x 1-1/8”
100
9231
1197
#8-32 x 1-1/8”
1000
7120
313
#8-32 x 1-1/8”
6500
1212
#8-32 x 1-1/4”
100
1198
#8-32 x 1-1/4”
1000
314
#8-32 x 1-1/4”
5500
1213
#8-32 x 1-3/8”
100
1199
#8-32 x 1-3/8”
1000
315
#8-32 x 1-3/8”
5000
1214
#8-32 x 1-1/2”
100
1200
#8-32 x 1-1/2”
1000
316
#8-32 x 1-1/2”
5000
1215
#8-32 x 1-5/8”
100
1201
#8-32 x 1-5/8”
1000
317
#8-32 x 1-5/8”
4000
1216
#8-32 x 1-3/4”
100
1202
#8-32 x 1-3/4”
1000
318
#8-32 x 1-3/4”
4000
1217
#8-32 x 1-7/8”
100
1203
#8-32 x 1-7/8”
1000
319
#8-32 x 1-7/8”
3500
1218
#8-32 x 2”
100
1204
#8-32 x 2”
1000
320
#8-32 x 2”
3000
Wood
Products
#8-32 x 7/8”
9236
Unit # 3748027
BREAKAWAY MACHINE SCREWS
Lighting
Truss Head – Phillips/Slotted Drive
Zinc finish.
No.
Size
Standard
Qty.
9100
#8-32 x 1-3/4”
100
8903
#8-32 x 1-3/4”
1000
10772
#8-32 x 1-3/4”
Metric
4000
9103
M4 x 45mm
100
8892
M4 x 45mm
1000
10783
M4 x 45mm
4000
129
Cabinet Locks
& Latches
No.
Abrasives
For use on knobs, pulls, handles and similar hardware. Zinc finish.
& Machines
Unit # 3748013
Edgebanding
& Veneers
10950
MACHINE SCREWS
Adhesives
& Caulk
8500
Decorative
Hardware
100
M4 x 22mm
M4 x 22mm
10890
Shelving
& Hardware
10949
Sinks
Qty.
Screws &
Fasteners
Size
Metric
Storage &
Convenience
No.
Surfacing
Products
Machine & Knob Screws
Connectors, Fasteners & Mirror Clips
Unit # 3468229
Unit # 1729183
CABINET CONNECTORS
Unit # 1729194
JOINT FASTENERS
MIRROR CLIPS
Tite Joint
Plastic
Joint Fastener
Zinc coated steel bolt with nylon head and barrel nut.
White.
Lgth.
No.
mm
Qty.
JUL-4003401100
34 to 43
500
Unit # 3468160
TWIN APPLICATION SCREWS
JUL-6122010
Male
14
JUL-6122020
Female
20
JUL-6122420
Female
24
KNA-6875PLAS
Zinc coated steel construction. For 3/4” thick wood.
Maintains solid joint connection without glue. 2” to
3-1/2” center-to-center distance.
No.
Desc.
Joint Fasteners
Clear. Packaged 100 per box with screws.
No. 6875PLAS. Star rosette design. Diameter 1-1/8”.
For Glass
No.
Thick. In.
KNA-516/25ZC
Joint fasteners, 25 pack
KNA-6092PLAS
1/4
Joint fasteners, 100 pack
Individual Parts
KNa-6875PLAS
1-1/8
KNA-516/100ZC
Two-part design for twin door applications. 5mm hole
dia. Slotted head.
Lgth.
No.
Desc.
mm
KNA-6094PLAS & KNA-6092PLAS
Drill Guide
KNA-516-60
Locking sleeve
KNA-516-62
Tightening rod
KNA-516-63
Drill guide
KNA-516-64
7/8” Drill
KNA-516-80
Tightening assembly
KNA-6094PLAS
1/8
Unit # 1729160
MIRROR CLIPS
Unit # 1729363
JOINT FASTENERS
Connectors, Fasteners & Mirror Clips
Unit # 1729165
KNA-263CHR
KNA-268CHR
For 1/4” thick glass. Polished chrome finish. 12 per
package with screws.
TABLETOP FASTENERS
Features flat bar plates measuring 7/16” x 3/16” x 1”.
Zinc finish. 100 per box.
No.
Bolt
Lgth. In.
KNA-517ZC
3-1/2
KNA-513ZC
Dim. In.
LxW
No.
KNA-263CHR
1-1/4 x 1-1/4
KNA-268CHR
1-1/4 x 11/16
4
Unit # 3748020
Unit # 1729161
Steel construction. 100 per box.
MIRROR CLIPS
No.
Width
In.
KNA-320STL
1
11
KNA-323STL
5/8
14
Ga.
Unit # 1729132
DESKTOP FASTENERS
DRAW BOLTS
KNA-277ANO
Hex Head
KNA-1547
For use in joining countertops and panels. 1/4”-20
thread size. Zinc finish.
Lgth.
No.
In.
Qty.
KNA-1548STL
Steel construction.
Ga.
Pkg.
Qty.
KNA-1547
12
100
KNA-1548STL
18
500
No.
130
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
322
3-1/2
500
5368
4
350
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
KNA-278ANO
Anochrome finish. 10 per pkg.
No. KNA-277ANO. Lower bracket. One-piece design.
No. KNA-278ANO. Upper bracket. Includes screw-on
upper flange.
Dim. In.
No.
WxH
KNA-277ANO
1-1/2 x 1
KNA-278ANO
1-1/2 x 1-1/8
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Clips, Finish Washers & Decking Screws
Sinks
Unit # 3748026
Unit # 1729162
GLASS RETAINER CLIPS
Black
100
10495
#6
Black
1000
For Glass
Thick. In.
10494
#6
Nickel
100
10498
#8
Black
100
1/4
10497
#8
Black
1000
1998
#8
Nickel
100
8893
#8
Nickel
1000
25,000
Unit # 4031050
GLASS RETAINER CLIPS
506
#8
Zinc
10500
#10
Black
100
10499
#10
Black
1000
10247
#10
Black
20,000
4474
#10
Nickel
100
10391
#10
Nickel
1000
670
#10
Nickel
20,000
Shelving
& Hardware
Unit # 3748060
DECKING SCREWS
Finish
Unit # 3013021
WIRE CHANNEL CLIPS
For use with ACQ lumber in outdoor deck, fence, and furniture applications. Steel
construction with Ultraguard coating. Sea salt spray, humidity and temperature corrosion tested.
No.
Size
Qty.
J-Style
No.
CPF31500C
13384
#7 x 1/14”
1000
13385
#7 x 1-5/8”
1000
13386
#7 x 2”
1000
13388
#8 x 2-1/2”
500
Dim. In.
HxW
13389
#8 x 3”
500
13390
#10 x 3-1/2”
250
1.465 x 1.525
13391
#10 x 4”
250
13392
#10 x 4-1/2”
250
13393
#10 x 5”
100
13394
#10 x 6”
100
Quality Products
Quality People
131
Wood
Products
Storage &
Convenience
Antique copper
Lighting
C800AC
Cabinet Locks
& Latches
No.
Screws &
Fasteners
Flat Head w/ Nibs – Square Drive – ACQuickCutters™
Abrasives
KNA-288ANO
1/2
Clips, Finish Washers & Decking Screws
& Machines
Dim.
In.
Qty.
Adhesives
& Caulk
Finish
#6
Decorative
Hardware
Size
No.
10496
Anochrome finish. 100 per package.
No.
Edgebanding
& Veneers
FINISH WASHERS
132
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Drive
Size
Lgth.
In.
11912
#3
1-15/16
11773
#3
Square Drive
2-3/4
17775
#1
1-15/16
11913
#1
2-3/4
11914
#1
3-1/2
11779
#2
1-15/16
11915
#2
2-3/4
No.
Unit # 1729157
SHELF NAILS
Unit # 3748047
Edgebanding
& Veneers
#2
3-1/2
KNA-255-81NALM
Almond
11917
#2
4-1/2
KNA-255-81NBR
Brass
11782
#2
6
No.
Drive
Size
KNA-255-81NSTB
Satin brass
11919
#3
1-15/16
12115
#1
KNA-255-81NWH
White
11920
#3
3-1/2
12119
#2
KNA-255-81NZC
Zinc
12122
#3
Unit # 3748029
Unit # 3748015
SHELF STANDARD SCREWS
Series 80
POWER BITS
1-1/2” length with #8 body and #6 head. Polybagged,
50 per pkg.
No.
Finish
POWER BITS
White
Magnetic
Zinc
#2 drive size. 10 per pkg.
Phillips Drive
Lgth.
In.
No.
13153
Square Drive
Lgth.
In.
Pozi Drive
12690
#2
1-15/16
12691
#2
2-3/4
12692
#2
3-1/2
12693
#2
4-1/2
12694
#2
Square Drive
6
13269
#1
2-3/4
No.
Lgth.
In.
13272
#1
6
13113
1-15/16
12695
#2
1-15/16
13114
Square Drive
10 per pkg.
Drive
Size
Phillips Drive
Lgth.
In.
11901
#1
1-15/16
12696
#2
2-3/4
11902
#1
2-3/4
12697
#2
2-3/4
11972
#1
3-1/2
12698
#2
6
11903
#1
6
11904
#2
1-1/2
11905
#2
1-15/16
11761
#2
2-3/4
11762
#2
3-1/2
11763
#2
4-1/2
11764
#2
6
P2R
Screws &
Fasteners
Drive
Size
Phillips Drive
No.
POWER BITS
Combo Drive
#2 drive size. 10 per pkg.
2-3/4
Unit # 3748049
Lighting
POWER BITS
13006*
6
Unit # 3748054
10 per pkg.
Unit # 3748008
Phillips Drive
2
13156
POWER BITS
Unit # 3748040
POWER BITS
Hexagon
Slotted
1-15/16” length. 10 per pkg.
1-15/16
11906
#3
1-15/16
11766
#3
2-3/4
11908
#3
3-1/2
11767
#3
Pozi Drive
6
11911
#2
1-15/16
11770
#2
2-3/4
11771
#2
3-1/2
2” length. 5 per pkg.
Blade Dim. In.
No.
W x Thick.
Fits Screw
Sizes
No.
Tip
Size In.
12177
3/32
11783
.154 x .032
#3 to #4
12178
7/64
11785
.215 x .036
#5 to #6
12179
1/8
11786
.250 x .038
#6 to #7
12180
9/64
11787
.275 x .042
#8 to #10
12181
5/32
11788
.312 x .046
#10 to #12
12182
3/16
11789
.360 x .050
#12 to #14
12183
7/32
133
Cabinet Locks
& Latches
KNA-80-80WH
KNA-80-80ZC
Shelf Fasteners & Power Bits
Square Drive
Storage &
Convenience
Unit # 1729143
Wood
Products
*Reduced bit.
1-15/16” length. 10 per pkg.
Adhesives
& Caulk
11916
Decorative
Hardware
Finish
No.
Shelving
& Hardware
Phillips Drive – ACR®
Abrasives
650 per package.
POWER BITS
& Machines
255 Standard Series
No.
Surfacing
Products
Sinks
Shelf Fasteners & Power Bits
Drive & Insert Bits, Bit Holders & Nutsetters
Unit # 3748044
Unit # 3748042
INSERT BITS
BIT HOLDERS
Slotted
C-Ring
Fits #6 and #8 screws. 5 per
pkg.
Blade Dim.
No.
L x W x Thick.
Unit # 3748041
DRIVE BITS
11921
Double Ended
1 x .218 x .040
Unit # 3748046
INSERT BITS
Pozi x Phillips
Two-piece design. 1/4” hex shank. 5 per pkg.
No.
Lgth.
In.
11794
3
11923
4
11924
6
Phillips Drive – ACR®
10 per pkg.
Phillips x Phillips
BIT HOLDERS
Drive
Size
No.
Square x Phillips
No.
Unit # 3748057
Desc.
3” Length
Qty.
11790
Pozi #2 x Phillips #2
5
11791
Phillips #2 x Reduced Phillips #2
5
11792
Square #2 x Phillips #2
2” Length
5
13245
Phillips #2 x Phillips #2
100
13246
Phillips #2 x Slotted #6 to #8
100
13247
Torx T20 x Torx T25
Drive & Insert Bits, Bit Holders & Nutsetters
100
12114
#1
12117
#2
12118
Reduced #2
12121
#3
HANGER BOLT DRIVERS
Hexagon
1” length. 10 per pkg.
#2 drive size. 1/4” hex shank. 25 per pkg.
1
13242
2-7/8
Unit # 3748050
Phillips Drive – Flush
No.
Lgth.
In.
13282
INSERT BITS
DRIVE BITS
13241
1/4” hex shank. 5 per pkg.
No.
Unit # 3748048
No.
Size
In.
12165
3/32
12166
7/64
No.
1-3/4” Length
12167
1/8
12362
1/4”-20
12168
9/64
12363
5/16”-18
12169
5/32
12364
12170
3/16
12171
7/32
12365
1/4”-20
12172
1/4
12366
5/16”-18
12173
5/16
12367
Unit # 3748056
Lgth.
In.
Magnetic w/Cap
Size
3/8”-16
2-9/16” Length
3/8”-16
Unit # 3748012
Unit # 3748045
1-15/16
NUTSETTERS
Unit # 3748007
BIT HOLDERS
INSERT BITS
Magnetic
Magnetic
Hex Shank
1/4” drive size. 1/4” hex shank. 5 per pkg.
Pozi
Drive
Phillips
Drive
Square
Drive
Combo
Drive
No.
Lgth.
In.
11925
4
2-3/8
11926
11928
1” length.
Unit # 3748009
Drive
Size
Phillips Drive
No.
Qty.
#1
10
11759*
#2
10
11760
#2
10
11765
#3
Pozi Drive
#2
10
11910*
#2
10
#3
Square Drive
10
11774
#1
11778
#2
10
11778B
#2
100
11918
#3
Combo Drive
13112
#2
* Reduced shank.
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
EXTENSION BARS
BIT HOLDERS
Magnetic – Quick Release
1/4” hex shank.
Lgth.
No.
In. Finish Qty.
11793B
10
11769
11772
6
Unit # 3748062
11758
134
No.
Lgth.
In.
10
10
10
11922
11793B 2-3/8 Plain
25
11922
5
14200
3
3
Plain
Blue
5
Unit # 3748016
5 per pkg.
Dim.
In.
No.
13677
1/4 x 1/2 x 2-9/16
Unit # 3748043
INSERT BIT KITS
10-Piece
BIT HOLDERS
Magnetic – One-Piece
Stainless steel construction. 1/4” hex shank. 5 per pkg.
No.
Lgth.
In.
12702
2-7/8
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
No.
11795
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Includes: #1, #2,
and #3 Phillips
bits; P2R bit; #1,
#2, and #3 Pozi
bits; #1, #2, and
#3 square drive
bits, and Super
Mag bit holder.
Desc.
10-Pc. insert bit kit
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
No.
Full Circle – Polymer
Color
REV-6072-16-11-52
16
White
REV-6072-16-15-52
16
Almond
REV-6072-18-11-52
18
White
REV-6072-18-15-52
18
Almond
REV-6072-28-11-52
28
White
REV-6072-28-15-52
28
Almond
REV-6072-32-11-52
32
White
REV-6072-32-15-52
32
Almond
White
1
REV-6001-18-15-4
18
Almond
12
3-Shelf
1
REV-6001-18-15-52
18
Almond
Features independently rotating double-wall ribbed
polymer shelves with 1” diameter telescoping steel
shaft. Includes mounting hardware and screws.
REV-6061-18-15-52*
18
Almond
1
REV-6001-20-11-4
20
White
12
Lazy Susans
REV-6001-20-11-52
20
White
1
Dia.
In.
2-Shelf – 26” to 31” ICH
REV-6001-20-15-4
20
Almond
12
REV-6001-20-15-52
20
Almond
1
REV-6001-24-11-4
24
White
12
REV-6001-24-11-52
24
White
1
REV-6001-24-15-4
24
Almond
12
REV-6001-24-15-52
24
Almond
1
REV-6001-28-11-4
28
White
12
REV-6001-28-11-52
28
White
1
REV-6001-28-15-4
28
Almond
12
REV-6001-28-15-52
28
Almond
1
REV-3072-18-11-52
18
White
REV-3072-24-11-52
24
White
REV-3072-28-11-52
28
3-Shelf – 38” to 46” ICH
White
Series 6065
REV-3073-18-11536
18
White
REV-3073-20-11536
20
White
REV-3073-20-15536
20
Almond
Trays Only
White. Bulk packed; 12 per carton.
Dia.
In.
No.
REV-3001-18-11-12
18
REV-3001-24-11-12
24
REV-3001-28-11-12
28
Series 6012. Dependent-rotation, dual-shelf design
with 3/4” diameter telescoping shaft assembly. For use
in cabinets with 26” to 32” inside height. Includes top
and bottom pivots and screws.
Series 6013. Dependently rotating polymer shelves.
Shelves adjust with single screw. Includes (3) full circle
shelves, 3/4” diameter telescoping center shaft (12”
upper, 36” lower), top and bottom pivots and fasteners.
For use in cabinets with 38” to 46” inside height.
Series 6065. Independently rotating five-shelf pantry
system. Features 1” diameter telescoping shaft assembly (9-1/4” upper, 52-1/2” lower) to accommodate 56”
to 62” inside height. Shelf adjusts with single screw.
Includes collar assemblies and mounting hardware.
20” to 32” models available by special order.
Series 6072. Independent-rotation dual-shelf design
with 1” diameter telescoping shaft (9-1/4” upper,
22-1/2” lower). For use in cabinets with 26” to 32”
inside height. Includes mounting hardware.
Hardware Sets
For Shelf
Dia. In.
Inside Cabinet
Ht. In.
REV-3072-04-18-6*
18
26 to 31
REV-3073-04184364*
18
38 to 46
24 or 28
26 to 31
No.
Series 6072
No.
Lazy Susans
Dia.
In.
Series 6012
18
White
REV-6012-18-15-52
18
Almond
* Includes ring cap.
REV-6012-20-11-52
20
White
Full Circle Lazy Susans & Hardware Sets
REV-6012-20-15-52
20
Almond
REV-6012-24-11-52
24
White
REV-6012-24-15-52
24
Almond
REV-6012-28-11-52
28
White
REV-6012-28-15-52
28
Series 6013
REV-6013-18-11-52
18
White
REV-6013-18-15526
18
Almond
REV-6013-20-11526
20
White
REV-6013-20-15-52
20
Series 6065
REV-6065-16-11-52
16
White
REV-6065-16-15-52
16
Almond
REV-6065-18-11-52
18
White
REV-6065-18-15-52
18
Almond
Let ISC Surfaces
Unit # 3044103
LAZY SUSAN HARDWARE SETS
Full Circle
Color
REV-6012-18-11-52
REV-3072-04-6
* Diagonal base.
Wood
Products
Color
Almond
Lighting
No.
Adhesives
& Caulk
18
Decorative
Hardware
12
REV-6001-18-11-52
White
Shelving
& Hardware
Qty.
18
Screws &
Fasteners
Color
REV-6001-18-11-4
For custom wood or laminate shelves. Contains top
and bottom pivots, upper and lower shaft assemblies,
collar assembly, two shelf supports and mounting
screws.
Shaft
No.
Dia. In.
REV-6020-04-52
3/4
Almond
135
Cabinet Locks
& Latches
2-Shelf
Dia.
In.
No.
Storage &
Convenience
Trays Only
Series 6013
Series 6012
Abrasives
Full Circle – Value Line™
Edgebanding
& Veneers
Unit # 3044182
LAZY SUSANS
& Machines
Storage & Convenience
Dia.
In.
Series 6072
Sinks
Unit # 3044105
LAZY SUSANS
Surfacing
Products
Full Circle Lazy Susans & Hardware Sets
Pie-Cut & Kidney-Shaped Lazy Susans & Hardware
Unit # 3044008
Unit # 3044108
LAZY SUSANS
LAZY SUSANS
6942 Series
Pie-Cut – Polymer
Includes 2 polymer shelves with telescoping center
shaft. Acommodates cabinets with 24” to 31” inside
height.
Unit # 3044005
LAZY SUSAN HARDWARE
Full Circle – 6000 Series
Color
Features 3/4” diameter telescoping shaft system (for
26” to 32” ICH), lubricated polymer components and
hardened screws to prevent slippage.
Note: Door and opening clearance must allow unit to
raise 3/8” as it rotates in and out of detent.
Dia.
No.
In.
Color
REV-6942-24-11-52
24
White
REV-6142-18-11-52
18
White
REV-6942-24-15-52
24
Almond
REV-6142-18-15-52
18
Almond
Lazy Susans
Dia.
In.
No.
REV-6020-96-31-2 & -36-2
REV-6000-07-52
REV-6942-28-11-52
28
White
REV-6142-22-11-52
22
White
Lower Shaft. For dependently rotating full circle sets in
wall cabinet installations.
Shelf Support. For full circle wood shelves. 5” diameter support. Requires 6020 Series or 6022 Series hardware sets.
No.
Desc.
REV-6942-28-15-52
28
Almond
REV-6142-22-15-52
22
Almond
REV-6020-96-31-2
31” Lower Shaft
REV-6020-96-36-2
36” Lower Shaft
Shelf Support
REV-6000-07-52
REV-6000-90-2
Pivot
Pie-Cut & Kidney-Shaped Lazy Susans & Hardware
Unit # 3044104
LAZY SUSAN HARDWARE SETS
Trays Only
Dia.
In.
Color
No.
Sets
REV-6901-24-11-4
24
White
12
REV-6901-24-11-52
24
White
1
LAZY SUSANS
REV-6901-24-15-4
24
Almond
12
Kidney-Shaped – Polymer
REV-6901-24-15-52
24
Almond
1
REV-6901-28-11-4
28
White
12
REV-6901-28-11-52
28
White
1
REV-6901-28-15-4
28
Almond
12
REV-6901-28-15-52
28
Almond
1
No.
Unit # 3044001
Includes (2) independently rotating shelves, 1” diameter telescoping shaft assembly (9-1/4” upper, 22-1/2”
lower), mounting hardware and screws. Accommodates 26” to 31” ICH.
For use with polymer D-shaped or full circle trays.
Includes post and pivot hardware with 3/4” diameter
telescoping shaft.
For Inside
No.
Cabinet Ht. In.
Qty.
No.
REV-6942-04-28-4
Post & Pivot Hardware
For Tray
Dia. In.
Dia.
In.
Individual Sets
Color
REV-6472-18-11-52
18
White
REV-6472-18-15-52
18
Almond
REV-6022-04-4
24 to 31
6
No.
Qty.
REV-6472-24-11-52
24
White
REV-6022-04-52
24 to 31
1
REV-6942-04-28-4
28
6
REV-6472-24-15-52
24
Almond
REV-6022-04-426
38 to 46
4
REV-6942-04-4
24
6
REV-6472-28-11-52
28
White
REV-6472-28-15-52
28
Almond
REV-6472-32-11-52
32
REV-6472-32-15-52
32
Bulk – 5 Sets
136
White
Almond
REV-6472-24-11-4S
24
White
REV-6472-24-15-4S
24
Almond
REV-6472-28-11-4S
28
White
REV-6472-28-15-4
28
Almond
REV-6472-32-11-4
32
White
REV-6472-32-15-4
32
Almond
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Color
White
REV-6221-22-15-52
Almond
D-Shaped, Kidney-Shaped & Pie-Cut Lazy Susans
Unit # 3044126
LAZY SUSANS
Sinks
28
REV-4WLS072-18-52
18
REV-4WLS072-20-52
20
REV-4WLS072-28-52
28
REV-4WLS072-32-52
Wood Classic Sets – 3 Shelf
32
REV-4WLS901-24-52
Single tray not predrilled
for hardware
24
REV-4WLS073-18536
18
REV-4WLS901-28-52
Single tray not predrilled
for hardware
28
20
REV-4WLS942-24-52 2-Shelf set w/ hardware
24
28
Bulk Packs (8 Trays per Carton)
31
REV-4WLS073-20536
D-Shaped – Diagonal Wall Cabinet
Lazy Susans
Unit # 3044086
LAZY SUSANS
Features 20” diameter dependently-rotating polymer shelves.
Includes pivots, fasteners and
telescoping 3/4” diameter shaft
assembly.
Edgebanding
& Veneers
REV-4WLS021-28-52
Wood Classic Sets – 2 Shelf
Kidney-Shaped – Wood Classics™
No.
Dia.
In.
Desc.
Individual Packs
REV-4WLS901-24-8
Trays only; hardware not
included
24
REV-4WLS901-28-8
Trays only; hardware not
included
28
Post & Pivot Hardware
No.
Inside Cabinet
Ht. In.
2-Shelf
Color
REV-7012-20-11-52
24 to 32
White
REV-7012-20-15-52
24 to 32
3-Shelf
REV-7013-20-11-52
38 to 46
White
REV-7013-20-15-52
38 to 46
Almond
Almond
Unit # 3044085
LAZY SUSANS
Hardware sold separately (1” diameter shaft system).
Dia.
No.
In.
Individual Shelves
1” diameter shaft adjusts to fit cabinets with 26” to 32”
ICH. Includes 4 complete hardware sets. Chrome.
REV-4WLS401-28-52
28
REV-4WLS940-04244
REV-4WLS401-32-52
Individual Shelves – Bulk
32
REV-4WLS940-04284
REV-4WLS401-28-8
28
SHELF SETS
REV-4WLS401-32-8
Individual Shelves w/ Bearing
32
Kidney-Shaped – Premiere™
REV-4WLS40128BS52
28
REV-4WLS40132BS52
Full Circle – Wood Classics™
For Tray
Dia. In.
No.
24
28
Unit # 3044098
Independently rotating
chrome wire shelves.
Features 1” diameter
telescoping shaft (9-1/4”
upper, 22-1/2” lower) to
accommodate 26” to
32”
ICH.
Includes
mounting hardware.
32
Unit # 3044140
High-density plywood
construction with 1”
rim and UV-cured
clear coat finish. Telescoping shaft allows
one-screw
adjustment for inside cabinet height.
Individual Shelves. Hardware sold separately.
Rev-A-Tray Sets – 1 Shelf. Contain shelf, positioner
assembly, 5” shaft and mounting screws.
Wood Classic Sets – 2 Shelf. Contain shelves, 1”
diameter telescoping shaft (9-1/4” upper, 22-1/2”
lower), mounting hardware and screws. Accommodates 26” to 31” ICH.
Wood Classic Sets – 3 Shelf. For wall cabinets.
Includes shelves, telescoping shaft (12” upper, 36”
lower), fasteners and pivots. Accommodates 38” to
46” ICH.
Dia.
No.
In.
Individual Shelves
REV-4WLS001-18-52
18
REV-4WLS001-20-52
20
REV-4WLS001-28-52
28
REV-4WLS001-32-52
Individual Shelves w/ Bearings
32
REV-4WLS001-18B52
18
REV-4WLS001-32B52
32
LAZY SUSAN FENCE RAILS
No.
Dia.
In.
REV-5472-28 CR
28
Full Circle
REV-5472-32 CR
32
Unit # 3044095
SHELF SETS
D-Shaped – Premiere™
Kidney-Shaped
Chrome.
For Tray
Dia. In.
No.
Full Circle
Features two chrome wire
shelves. Telescoping shaft (9-1/4”
upper, 22-1/2 lower) accommodates 26” to 32” ICH. Includes
mounting hardware.
REV-5LSF018-CR
18
REV-5LSF020-CR
20
REV-5LSF028-CR
28
No.
Dia.
In.
32
REV-5272-20-CR
20
REV-5272-32-CR
32
REV-5LSF032-CR
Kidney-Shaped
REV-5LSF424-CR
24
Adhesives
& Caulk
No.
REV-6221-22-11-52
REV-4WLS901 Series
Features plywood tray with 1” high solid wood rim.
Decorative
Hardware
18
REV-4WLS021-18-52
Contains 22” dia. shelf,
positioner assembly, 5”
shaft and mounting
screws.
Shelving
& Hardware
32
Screws &
Fasteners
REV-4WLS001-32-8
Rev-A-Tray Sets – 1 Shelf
Storage &
Convenience
28
D-Shaped – Polymer
Wood
Products
20
REV-4WLS001-28-8
Unit # 3044109
Lighting
REV-4WLS001-20-8
TRAY SETS
Pie-Cut – Wood Classics™
137
Cabinet Locks
& Latches
18
Abrasives
REV-4WLS001-18-8
Unit # 3044138
LAZY SUSANS
& Machines
Dia.
No.
In.
Individual Shelves – Bulk (8 per carton)
Surfacing
Products
D-Shaped, Kidney-Shaped & Pie-Cut Lazy Susans
Half-Moon Lazy Susans & Tip-Out Trays
Unit # 3044118
Unit # 3044048
TIP-OUT TRAYS
TIP-OUT TRAYS
False Front
6572 Series
Unit # 3044120
LAZY SUSANS
Half-Moon – Pivot Only
Self-Holdin® hinge provides self-closing action. Tray is
concealed when closed. Includes instructions.
Features tab stops on both ends. Bulk packed; 40 trays
per carton.
Lgth.
No.
In.
Color
Includes molded polymer standard and accessory
trays with Self-Holdin® hinges.
Size
No.
In.
Color
Individual — 2 Shelves w/ 2 pr. Hinges
Features two textured polymer trays with matching
shelf supports and chrome-plated 17” shaft. Includes
both standard and 90° hinge Euro brackets, (2) positioner bases, template and installation instructions.
Min.
No.
Open. In.
Color
REV-6561-11-11-4
11
White
REV-6561-11-15-4
11
Almond
REV-6572-11-11-50
11
White
REV-6561-14-11-4
14
White
REV-6572-11-15-50
11
Almond
14
Almond
REV-6572-14-11-50
14
White
REV-6572-14-15-50
14
Almond
REV-6842-33-11-57
16-1/8
White
TIP-OUT TRAYS
REV-6572-11-11-52
11-1/4
White
REV-6842-33-15-57
16-1/8
Almond
False Front
REV-6572-11-15-52
11-1/4
Almond
REV-6842-39-11-57
19-1/4
REV-6572-14-11-52
14-1/4
White
REV-6561-14-15-4
Unit # 3044049
White
REV-6842-39-15-57
19-1/4
Half-Moon Lazy Susans & Tip-Out Trays
Almond
REV-6572-14-15-52
14-1/4
Almond
Bulk Pack - 40 Trays w/ 40 pr. Hinges
Unit # 3044123
LAZY SUSANS
Half-Moon – Pivot & Slide
Quarter-turn, two-shelf
design. Includes (2)
shelf supports, (2)
positioner bases, standard and Euro brackets,
17”
shaft
assembly, (2) pairs of
slides, template and
instructions.
Min.
Open. In.
Color
No.
REV-6882-31-11-57
13-1/4
White
REV-6882-31-15-57
13-1/4
Almond
REV-6882-33-11-57
16-1/8
White
REV-6882-33-15-57
16-1/8
Almond
REV-6882-39-11-57
19-1/4
White
REV-6882-39-15-57
19-1/4
Almond
Unit # 3044139
Half-Moon – Wood Classics™
Width
In.
Min. Cabinet
Open. In.
REV-4WLS882-32570
32
12
REV-4WLS882-35570
35
15
REV-4WLS882-38570
38
18
138
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
White
11-1/4
Almond
REV-6572-14-11-4
14-1/4
White
REV-6572-14-15-4
14-1/4
Almond
Unit # 3044050
TIP-OUT TRAY SYSTEMS
Extruded
Accessory Trays
Bulk packed; 40 trays per carton.
Lgth.
No.
In.
Standard Trays
Color
11
White
REV-6581-11-15-4
11
Almond
REV-6581-14-11-4
14-1/4
White
36” Length; may be cut to desired size.
No.
Color
Tray w/ 2 Pairs of Hinges & End Caps
REV-6551-36-11-52
White
REV-6581-14-15-4
14-1/4
Almond
Accessory Trays w/ Ring Holder & Soap Dish
REV-6551-36-15-52
Almond
Tray w/ 1 Pair of Hinges & End Caps
REV-6591-11-11-4
11
White
REV-6551-36-11-50
White
REV-6591-11-15-4
11
Almond
REV-6551-36-15-50
Almond
REV-6591-14-11-4
14-1/4
White
REV-6591-14-15-4
14-1/4
Almond
For use in left or right-hand blind corner cabinets. 5/8”
thick plywood tray with 1” high solid wood rim. UVcured clear coat finish. Independently rotating.
Includes two shelves with pivot/slide hardware.
No.
11-1/4
REV-6572-11-15-4
Standard Trays
REV-6581-11-11-4
LAZY SUSANS
REV-6572-11-11-4
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
We appreciate
your business!
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sink Front Trays, Waste Containers & Lids
Unit # 3044025
WASTE CONTAINERS
Sinks
Pull-Out
Unit # 3044051
Edgebanding
& Veneers
SINK FRONT TRAYS
REV-6542-97-15-4
–
White
–
Tray with End Caps, Hinges & Screws
REV-6541-36-11ETH
36
REV-6541-36-11-50
REV-6541-36-15-50
36
Almond
White
36
Tray with End Caps & 2 Pairs of Hinges
2/4
10-5/8 x 22
REV-RV-12PB-LE
28
3/4
12 x 16
REV-RV12PB S
35
Full
10-5/8 x 22
REV-RV-12PB-50
50
3/4
11-1/4 x 22
REV-RV-14PB S
20
Full
14-5/8 x 16
35
3/4
Double Waste Containers
14-7/8 x 22
REV-RV-18PB-1
REV-RV-15PB-2 S
27
Full
11-5/8 x 22-3/4
REV-RV-18PB-2 S
35
Full
14-7/8 x 22-3/4
REV-RV18PB2S-20*
35
Full
14-7/8 x 22-3/4
* Bulk.
† Per container.
Almond
REV-6541-36-11-52
36
White
REV-6541-36-15-52
36
Almond
Unit # 3044114
DOOR MOUNTING KITS
For RV Series Bins & Hampers
Tip-Out Trays
Includes 2 trays and 2 pairs of hinges.
Size
No.
In.
Color
REV-6542-11-11-52
11
White
REV-6542-11-15-52
11
Almond
REV-6542-14-11-52
14
White
REV-6542-14-15-52
14
Sink Front Trays, Waste Containers & Lids
Almond
Unit # 3044116
SINK FRONT TRAY HINGES
For use in any door application; does not require sub-door.
Two-piece bracket for easy installation and adjustment.
Spacers position mounting holes in thick part of door. Fits
all RV Series waste bins and hampers.
Kit contains: (2) product members, (1) set of left and
right door brackets, (2) 1/4” x 1/2” bolts, (2) 1/4” x 1/2” bolts
with washers, (4) #10 x 1/2” truss-head screws, (4) nylock
nuts, (2) 1/4” x 1” bolts, (2) 1/4” x 1” bolts with washers and
(4) 3/8” spacers.
No.
Color
Qty.
REV-RV DM KIT
White
1
REV-RV DM KIT-100
White
100
Metallic silver
1
REV-RV DM17 KIT
Euro Hinges. For long sink front or cooktop panels in
framed or frameless cabients. Opening is adjustable from
45° to 90°.
Self-Holdin® Hinges. Require less than 2mm clearance
for countertop and no clearance below false front.
Extruded Tray Hinges. Hinge and end cap sets for
extruded trays. Include instructions and adhesive. Individually polybagged.
No.
Finish
Qty.
Euro Hinges
REV-6552-ETH-10
Chrome
Self-Holdin® Hinges
10 pr.
REV-6552-95-0220
Stainless
Extruded Tray Hinges
40 pr.
REV-6552-97-11-4
40 pr.
REV-6552-97-15-4
35
Almond
White
REV-6541-36-15ETH
36
Tray with End Caps & 1 Pair of Hinges
9-1/2 x 22
REV-RV-12PB
White
Almond
40 pr.
Unit # 3044193
WASTE CONTAINER LIDS
Polymer construction.
Note: Adds .885” to waste container height.
No.
Fits Container
Size Qt.
Color
REV-RV-35-LID-1
35
White
REV-RV-35-LID-G-1
35
Green
REV-RV-50-LID-1
50
White
REV-RV-50-LID-G-1
50
Green
Decorative
Hardware
REV-6542-97-11-4
Almond
8-7/8 x 16
Screws &
Fasteners
REV-6541-36-15-4
36
Hinges & End Caps, 40 Pr. w/ Instr. & Adhesive
3/4
Shelving
& Hardware
White
3/4
30
Storage &
Convenience
36
20
REV-RV-9PB
Wood
Products
REV-6541-36-11-4
Color
REV-RV-8PB
Cabinet Locks
& Latches
No.
Dim In.
WxL
Lighting
Kits & Components
Size
In.
Trays Only, Bulk Pack
Includes containers, frame and slides. Fully assembled.
Cap.
Drawer
No.
Qt.†
Ext.
Single Waste Containers
139
Abrasives
1-11/16” thick. Self-Holdin® hinge provides self-closing action. Tray is concealed
when closed. Includes instructions. For solid surface applications where minimum
clearance is important. 1-11/16” wide.
Double Waste Container
& Machines
Single Waste Container
Adhesives
& Caulk
Slim Series™
Waste Containers
Unit # 3044084
WASTE CONTAINERS
Pull-Out – Wood Classics™
Unit # 3044097
WASTE CONTAINERS
Pull-Out – Premiere™
RS-4WC-15DM-1
RS-4WC-18DM-2
RS-4WTCM-18DM2
RS-4WTCM-15DM2
Features aluminum full-extension slides, vertical adjustment mechanism and springloaded self-closer.
Cap.
Dim. In.
No.
Finish
Qt.*
WxDxH
Single Container Systems
REV-5349-15DM18-1
White
35
11 x 18 x 19-1/2
REV-534915DM18117
Metallic Silver
35
11 x 18 x 19-1/2
REV-5349-15DM-1SS
Stainless steel
32
11 x 22 x 19-1/2
White
35
11 x 22 x 19-1/2
Metallic Silver
35
11 x 22 x 19-1/2
REV-5349-15DM-1
REV-5349-15DM-117
REV-5349-1550DM-1
White
50
Double Container Systems
11 x 22 x 22-3/4
REV-5349-1527DM-2
White
27
11-5/8 x 22-3/4 x 19-1/8
REV-5349-18DM-2SS
Stainless steel
32
14-7/8 x 22 x 19-1/2
REV-5349-18DM-2
White
35
14-7/8 x 22 x 19-1/2
REV-5349-18DM-217
Metallic Silver
35
14-7/8 x 22 x 19-1/2
REV-5349-2150DM-2
White
50
15-5/8 x 22 x 22-3/4
* Per container.
Features full-extension slides and integral RV door mount brackets. Fully assembled.
Waste Containers
Cap.
Dim. In.
No.
Desc.
Qt.*
WxHxD
REV-4WC-15DM-1
Single, bottom mount
35
11-7/8 x 19-1/4 x 18-3/4
REV-4WC-18DM-2
Double, bottom mount
35
14-7/8 x 19-1/4 x 22
REV-4WCTM-12DM1
Single, top mount
35
12 x 17-7/8 x 22
REV-4WCTM1550DM1
Single, top mount
50
12 x 22-5/8 x 21-5/8
REV-4WCTM-15DM2
Double, top mount
27
12 x 17-3/4 x 22-7/8
REV-4WCTM-18DM2
Double, top mount
35
15 x 17-7/8 x 22
REV-4WCTM2150DM2
Double, top mount
50
18 x 22-5/8 x 21-5/8
Quad, top mount
27
24 x 22-5/8 x 18
REV-4WCTM-27-4
Waste Containers
* Per container.
Accessories
Unit # 3044151
DOOR MOUNT EXTENDERS
Premiere™
Fits aluminum frame pull-out units. Attaches to
door bracket; allows mounting adjustment and
eliminates need for subdoor. Chrome. Includes 4
brackets, machine screws, wood screws and nuts.
Note: When installing, unit must be moved back
3/16” to allow full closure.
No.
Desc.
REV-5345-DM-KIT52
Door mount extender kit
No.
Desc.
Dim. In.
WxHXD
REV-4WCTM-SP-KIT
Wood spacer kit
1-1/2 x 22-1/4 x 2-7/16
Unit # 3044184
WASTE CONTAINERS
Pull-Out – Rev-A-Motion
Unit # 3044153
WASTE CONTAINERS
REV-4WCBM-1550DM1
Pull-Out – Premiere™
Features dual gray polymer containers in chrome wire
frame and 18” bottom-mount slides. Includes doormount brackets. Requires 14-1/4” minimum ICW, with
15-7/8” H x 13-3/4” W minimum opening.
REV-4WCBM-15DM-1
No.
Cap.
Qt.*
Dim. In.
HxWxD
REV-5469-15DM-2CR
15
15-3/4 x 14 x 18
* Per container.
REV-4WCBM-2150DM2
REV-4WCBM-2430DM2
Bottom-mount design. Features gas/spring assist mechanism for smooth opening
and soft closing. Maple frame with natural finish; metallic silver polymer containers.
Cap.
Dim. In.
No.
Qt.*
HxWxD
Single Container
35
19-1/4 x 12 x 21-3/4
REV-4WCBM-1550DM1
50
Double Container
23-3/16 x 12 x 21-3/4
REV-4WCBM-2430DM2
30
19-1/4 x 20-1/4 x 21-3/4
REV-4WCBM-18DM-2
35
19-1/4 x 14-1/4 x 21-3/4
REV-4WCBM-2150DM2
50
23-3/16 x 17-1/4 x 22-5/8
* Per container.
140
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Waste Containers
Unit # 3832001
Slide-Away Mfg.
Sinks
WASTE CONTAINERS
Pull-Out
Unit # 3044155
Edgebanding
& Veneers
WASTE CONTAINERS
Pull-Out
No.
Adhesives
& Caulk
For kitchen, wet bar and vanity cabinets. Features 10L
and 20L stainless steel containers with cover and
built-in handles. Measures 15-3/16” H x 11-7/8” W x
18-3/4” D. Includes frame, full-extension ball bearing
slides and mounting screws.
No. REV-8-78530DM2SS. Includes door mount
bracket.
Desc.
301DMW
Unit # 3044026
WASTE CONTAINERS
Pull-Out – 568 Series
401DMXW & 401DMXA
Waste Container Sytems. Include wastebasket(s) and mounting hardware.
Waste Container Systems
REV-568-09-30S
REV-568-20-30S
No.
Desc.
Color
30-quart containers ride in full-size, bottom mount basket. Features full-extension
drawer slides and door mount brackets. Measures 19-1/4” H x 22” D. Fully assembled.
Width
No.
Desc.
In.
301W
Single bin pull-out
White
301A
Single bin pull-out
Almond
REV-568-09-30S
Single container
9-1/2
REV-568-20-30S
Double container
20-1/4
301DMW
Single bin pull-out for raised-panel doors
White
401DMXW
Double bin pull-out for raised panel doors
White
401DMXA
Double bin pull-out for raised panel doors
Almond
Wastebaskets Only
Unit #3044025
Unit # 3044029
WASTE CONTAINERS
No.
Cap.
Qt.
Color
For Use
With System
301W
Pull-Out
30QTW
30
White
Portable single container system with handle and lid.
Polymer construction. Includes drop cord for automatic
opening. Fully assembled with 18” slides and framework.
30QTA
30
Almond
301A
35QTW
35
White
401DMXW
35QTA
35
Almond
401DMXA
Shelving
& Hardware
301A & 301W
Screws &
Fasteners
Door mount
Storage &
Convenience
REV-8-78530DM2SS
Decorative
Hardware
Undersink mount
Wood
Products
REV-8-785-30-2SS
20
9-3/4 x 18 x 15-3/4
WASTE CONTAINERS
Unit # 3044028
Counter Mount
WASTE CONTAINERS
Pull-Out – EZ-Hider
Features all-metal housing for slide tray and container, deodorizer bar and epoxy-coated front panel.
Mounted on ball-bearing extension slides. 30-qt.
capacity.
No. REV-6700-61-BULK. Container only; bulk
packed.
No.
REV-EZ-300-52
REV-EZ-300-15-52
REV-6700-61-BULK
Color
Sits inside cabinet; container is accessed from top.
Stainless steel construction with rubber ring to seal
in odors. Includes mounting ring and lid.
No.
Cap.
Liters
Dim. In.
WxD
White
REV-8-060-11SS
11
12-1/4 x 11-5/8
Almond
REV-8-060-15SS
15
12-1/4 x 13-1/4
White
141
Cabinet Locks
& Latches
Dim. In.
WxDxH
Abrasives
REV-569-10
Size
Qt.
& Machines
No.
Lighting
Unit # 3044156
Waste Containers & Hampers
Unit # 3044192
WASTE CONTAINERS
Cap.
Qt.
Dim. In.
HxWxD
Desc.
REV-RV-20-6
20
15 x 8-3/8 x 14-1/4
White polymer
RV-8 & RV-14
REV-RV-1024W
27
17-3/4 x 11 x 11
White polymer
RV-15, 4WCTM-15 & 4WCTM-27-4
REV-RV-1024-17-10
27
17-3/4 x 11 x 11
Metallic silver polymer
5349
REV-6700-61-B
30
17-7/8 x 9-3/8 x 15-3/8
White polymer
RV-9, EZ-300 & 568
REV-5349-SS-52
32
17-5/8 x 10-1/2 x 14-7/16
Stainless steel
5349-SS
REV-RV-35-8
35
17-7/8 x 14-3/8 x 10-1/2
White polymer
RV-12, RV-18, 5349 & 4WCTM
REV-RV-35-17-8
35
17-7/8 x 14-3/8 x 10-1/2
Metallic silver polymer
5349 & RV
REV-RV-35-52
35
17-7/8 x 14-3/8 x 10-1/2
White polymer
REV-RV-50-17-8
50
21-3/4 x 10-3/4 x 14-3/4
White polymer
REV-RV-50-52
50
21-3/4 x 11-1/4 x 15-5/8
White polymer
No.
For Pull-Out
Series
5349
Waste Containers & Hampers
Unit # 3044043
Unit # 3044137
Unit # 3044066
PULL-OUT HAMPERS
PULL-OUT HAMPERS
VANITY HAMPERS
590 Series
Wire
Pull-Out
Features removable basket, machine washable
hamper bag and fullextension ball bearing
slides. 18” depth allows
installation
in
vanity
applications.
Wire Hampers
No.
Bottom mount with door-mounting capability. Includes
18” full-extension slides, threaded bearings, caps,
screws, canvas bag with hook-and-loop fasteners, and
assembly tool.
No.
Cap.
Qt.
Dim. In.
WxDxH
REV-590-15 S
64
14-7/8 x 18 x 19-1/4
REV-HRV-1520 S CR
Cap.
Bushels
Dim. In.
WxH
1.71
14-3/4 x 19-3/8
REV-HPRV-1925 S
REV-HRV-1215 S
Accessories
No.
Desc.
REV-HRV-1520LINER
Replacement bag
Unit # 3044179
PULL-OUT BASKETS
Wire
Basket rests on top of
full-extension slides to
eliminate torque and
twisting.
Bayonet
mounting system facilitates basket installation and removal. 16”
deep. Chrome finish.
Bulk packed; 5 sets
per carton.
Unit # 3044129
PULL-OUT HAMPERS
Premiere™
REV-HURV-1512 S
No. REV-HPRV-1520 S. Includes frame and full-extension slides.
No. REV-HURV-1512 S. 1.37 cu. ft. capacity basket.
Includes frame and full-extension slides.
Dim. In.
WxHxD
No.
Baskets
Features self-closing aluminum slides and adjustable
door-mount frame. Includes removable canvas bag
with handles.
Fits
Dim. In.
No.
Cabinet Type
HxWxD
REV-5590-15CR
142
Base 18
No.
REV-HPRV-1520 S
14-1/4 x 19-1/4 x 20
Pull-Out Hampers w/ Lid
REV-CB-181611CR-5
18 x 11
REV-CB-241611CR-5
24 x 11
REV-HPRV-1925 S
19-7/8 x 26 x 14
White Wire Hampers
REV-CB-301611CR-5
30 x 11
REV-HRV-1215 S
REV-CB-301618CR-5
30 x 18
REV-HRV-1220 S
11-7/8 x 19-3/8 x 18
REV-HRV-1515 S
14-3/4 x 14-3/4 x 18
Accessories
No.
Desc.
For Basket
Dim. In.
WxH
REV-CHBI301618-5
Cloth liner
30 x 18
19-1/4 x 14-1/2 x 18
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Polymer Hampers
Dim. In.
WxH
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
11-7/8 x 14-3/4 x 18
REV-HRV-1520 S
14-3/4 x 19-1/2 x 18
Polymer Utility Baskets
REV-HURV-1512 S
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
14-1/4 x 11-7/8 x 18
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
REV-BDC-200-11
White
JUL-ZSI.500BI1N & 550BI1N
JUL-ZSI.500FI3 & 550FI3
JUL-ZSI.500BI3A & 550BI3A
REV-BDC-200-20
Clear
Max. Drawer Size 20-1/8” W x 21-1/4” L
REV-BDC24-15
Almond
REV-BDC24-11
White
REV-BDC24-20
Drawer Organizers
Clear
JUL-ZSI.500MI3 & 550MI3
Unit # 3468315
DIVIDERS
JUL-ZSI.500KI4A & 550KI4A
Adjustable organization system for “M” height drawers.
Features stainless steel dividers and removable dishwasher-safe gray nylon trays. Measures 2.52” H.
Dim. In.
No.
LxW
Adjustable organization system for “M” height drawers.
Features stainless steel dividers and removable dishwasher-safe gray nylon trays. Measures 2.52” H.
Dim. In.
No.
LxW
JUL-ZSI.500FI1
20 x 4.13
JUL-ZSI.500BI1N
JUL-ZSI.550FI1
22 x 4.13
JUL-ZSI.550BI1N
22 x 4.06
JUL-ZSI.500FI3
20 x 11.45
JUL-ZSI.500BI3A
20 x 11.02
JUL-ZSI.550FI3
22 x 11.45
JUL-ZSI.550BI3A
22 x 11.02
JUL-ZSI.500MI3
20 x 11.69
JUL-ZSI.500KI4A
20 x 14.84
JUL-ZSI.550MI3
22 x 11.69
JUL-ZSI.550KI4A
22 x 14.84
20 x 4.06
Wood
Products
TANDEMBOX Intivo – ORGA-LINE
Surfacing
Products
Edgebanding
& Veneers
Decorative
Hardware
JUL-ZSI.500FI1 & 550FI1
Almond
Shelving
& Hardware
REV-BDC-200-15
Screws &
Fasteners
Textured cover hides scratches. Set includes: cover
with molded drawer and stop, height-adjustable sliding
rail kit, screws and instructions.
No.
Color
Max. Drawer Size 16-3/4” W x 21-1/4” L
CUTLERY ORGANIZERS
Storage &
Convenience
BREAD DRAWER COVER KITS
Unit # 3468309
UTENSIL ORGANIZERS
Adhesives
& Caulk
Unit # 3468310
Unit # 3044052
Sinks
Drawer Organizers
3-7/16
Double
6-15/16
Cabinet Locks
& Latches
Single
JUL-ZSI.020Q
Proudly Serving
Abrasives
Kansas, Missouri
& Oklahoma
Unit # 3468314
TRAYS
For creating custom organizer configurations in wide
“M” height drawers. Measures 3-1/2” W.
Lgth.
No.
Desc.
In.
JUL-ZSI.010SI
Single
JUL-ZSI.020SI
Double
3-1/2
7
JUL-ZSI.030SI
Triple
10-3/8
143
& Machines
JUL-ZSI.010Q
Lighting
For creating custom organizer configurations in wide
“M” height drawers. Measures 3-1/2” W.
Lgth.
No.
Desc.
In.
Drawer Organizers
Unit # 3468313
Unit # 3468305
SPICE TRAY SETS
CROSS DIVIDERS
For use in “D” height drawers. Includes 3 trays per set.
For use in “D” height drawers. Measures 4-1/2” H x
42-3/8” L; cut to size (interior cabinet opening minus
12-1/2” for food/bottles, or minus 3-1/2” for all other
applications).
No.
Finish
Unit # 3468304
BOTTLE ORGANIZERS
For use in “D” height
drawers.
Includes
stainless steel bottle
tray, cross dividers
with
spring-loaded
connectors,
and
installation marking
template.
Measures
6-1/2” H x
8-11/16” W.
Lgth. In.
Tray
Overall
Silk White
No.
JUL-ZFL.30BFS6SW
18-1/2
20
JUL-ZFL.30BFS7SW
20-9/16
22
JUL-ZFL.30BFS8SW
22-1/2
24
JUL-ZFL.30BFS9SW
24-1/2
Terra Black
26
JUL-ZFL.30BFS6TB
18-1/2
20
JUL-ZFL.30BFS7TB
20-9/16
22
JUL-ZFL.30BFS8TB
22-1/2
24
JUL-ZFL.30BFS9TB
24-1/2
Stainless Steel
26
Dim. In.
HxWxD
No.
Finish
JUL-ZFZ.38G0I 4-3/4 x 11-1/8 x 7-1/2 Stainless steel
Unit # 3468307
LATERAL DIVIDERS
JUL-Z40L1077ASW
Silk white
JUL-Z40L1077ATB
Terra black
JUL-Z40L1077ANI
Nickel
Unit # 3468272
BOTTLE ORGANIZERS
TANDEMBOX
For use in “D” height drawers. Measures 3-15/16” L.
No.
Finish
JUL-Z43L100SSW
Silk white
Terra black
JUL-ZFL.30BFI6
18-1/2
20
JUL-Z43L100LTB
JUL-ZFL.30BFI7
20-9/16
22
JUL-Z43L100I
JUL-ZFL.30BFI8
22-1/2
24
JUL-ZFL.30BFI9
24-1/2
26
Stainless steel
Unit # 3468302
ADAPTER PROFILES
Unit # 3468303
For use with “D” height drawers. Includes bottle tray,
inside divider, cross dividers with spring-loaded connectors, and marking template. Measures 6-1/2” H x
20-1/2” L x 8-11/16” W when assembled.
No.
Finish
INSIDE DIVIDERS
For use in “D” height drawers.
Lgth.
In.
No.
For use with cross dividers in “D” height drawers; two
required per application.
Lgth.
No.
In.
Silk White
JUL-Z49L422SSW
18
18
JUL-Z49L472SSW
20
JUL-Z46L470SSW
20
JUL-Z49L522SSW
22
JUL-Z46L520SSW
22
JUL-Z49L572SSW
24
JUL-Z46L570SSW
24
JUL-Z49L622SSW
JUL-Z46L620SSW
26
Silk White
JUL-Z46L420SSW
JUL-Z49L422STB
18
JUL-Z49L472STB
20
JUL-Z46L470STB
20
JUL-Z49L522STB
22
JUL-Z46L520STB
22
JUL-Z49L572STB
24
24
JUL-Z49L622STB
JUL-Z46L620STB
26
JUL-Z49L422I
18
18
JUL-Z49L472I
20
20
JUL-Z49L522I
22
JUL-Z46L520I
22
JUL-Z49L572I
24
JUL-Z46L570I
24
JUL-Z49L622I
26
JUL-Z46L620I
26
Stainless Steel
JUL-Z46L470I
144
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Unit # 3468311
PLATE HOLDER SETS
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
For use in “D” height drawers. Measures 6-3/4” H.
Includes 2 per set.
Plate
No.
Dia. In.
Finish
JUL-ZTH.0350
Stainless Steel
26
JUL-Z46L420I
Stainless steel
26
18
JUL-Z46L570STB
Gray
JUL-ZFI30BZI7N
Terra Black
JUL-Z46L420STB
Terra Black
JUL-ZFI30BZS7N
7-1/16 to 12-5/8
Gray
Phone or FAX
your order today!!
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
Door Mount Storage
Unit # 3447017
SPICE RACKS
Adjustable
Wood Classics™
Shelf Sets
Color
Lgth.
In.
No.
REV-6232-08-11-52
7-1/8
White
REV-6232-08-15-52
7-1/8
Almond
REV-6232-14-11-52
13-3/4
White
REV-6232-14-15-52
13-3/4
Almond
REV-6232-20-11-52
19-3/4
White
REV-6232-20-15-52
19-3/4
5 Shelves
REV-6235-08-11-52
7-1/8
White
REV-6235-08-15-52
7-1/8
Almond
REV-6235-14-11-52
13-3/4
White
REV-6235-14-15-52
13-3/4
Almond
REV-6235-20-11-52
19-3/4
White
REV-6235-20-15-52
19-3/4
Almond
S9400MNL2
8-3/4
S9410MNL2
Door Mount Storage
11-3/4
Birch/maple hardwood construction with UV-cured
clear coat finish. Features polymer top tray and adjustable door-mount brackets.
Fits
No.
Cabinet Type
REV-4SBSU-15
Base 30
REV-4SBSU-18
Base 36
REV-4SBSU-21
Base 42
Unit # 3044196
Unit # 3044078
Door Mount – Wood Classics™
SPICE RACKS
Unit # 3044076
SPICE RACKS
No.
Width
In.
REV-4SR-15
9-5/8
REV-4SR-18
12-5/8
REV-4SR-21
15-5/8
Hardwood Board
Wood
Products
REV-6232-58-4528
Storage &
Convenience
For installation in wall cabinets.
Features
hardwood
maple construction with UVcured clear finish. Measures
21-1/2” H x 3-1/8” D. Includes
screws.
Desc.
26” Bright Aluminum Door
Standards w/ 4 Shelf Clips
58” Bright Aluminum Door
Standards w/ 10 Shelf Clips
REV-6232-26-4528
Screws &
Fasteners
Accessories
No.
Shelving
& Hardware
CUTTING BOARDS
Almond
Spice Racks
Outside
Rack Dim. In.
No.
WxDxH
REV-4ASR-15
10-1/8 x 4 x 25
REV-4ASR-18
12-1/2 x 4 x 25
REV-4ASR-21
12-1/2 x 4 x 25
Unit # 3044166
SPICE RACKS
Lighting
Adjustable. Includes (3) shelves,
(2) 3/4” W x 3/4” D x 22” H slotted
standards and screws.
Door Mount
Polyethylene Board
Includes rack, cutting board and screws. 16-7/8” overall height.
Accessories
Size
In.
No.
No.
Shelves – 10 per Pkg.
REV-4ASR-15BIN-10
10
REV-4ASR-18BIN-10
13
REV-4ASR-21BIN-10
Standards w/ Bracket – 20 per Pkg.
16
REV-4ASR-25STD-20
25
REV-4ASR-31STD-20
31
REV-4ASR-37STD-20
37
REV-4DMCB-15
Dim. In.
WxDxH
Rack
Board
Hardwood Board
9-1/2 x 3 x 8
7-7/8 x 1-1/4 x 16
Polymer tray measures 72” L x 3-15/16” H x 2-7/16” D.
No.
Color
REV-4DMCB-18 12-1/2 x 3 x 8 10-7/8 x 1-1/4 x 16
Polyethylene Board
REV-6571-72-11-4
White
REV-4DCMB-15P 12-1/2 x 2 x 8 9-3/4 x 5/8 x 15-3/4
REV-6571-72-15-4
Almond
REV-4DCMB-18P 15-3/4 x 2 x 8
13-3/8 x 5/8
x 15-3/4
145
Cabinet Locks
& Latches
Lgth.
In.
2 Shelves
No.
Maple construction with clear finish. Includes mounting hardware.
REV-6232-08-11-52
Decorative
Hardware
Adhesives
& Caulk
Wide polymer trays packaged with screw-in clips.
Note: Shelf clips packaged
with mounting standards;
must be ordered separately
to complete the set.
Abrasives
Door Mount
Edgebanding
& Veneers
Unit # 3044128
CUTTING BOARD/KNIFE HOLDERS
& Machines
Unit # 3044023
STORAGE SHELVES
Drawer Organizers
Unit # 3044033
Unit # 3044122
CUTLERY TRAYS
UTILITY TRAY INSERTS
CT/GCT Series
Wood Classics™
Birch/maple hardwood construction with UV-cured
clear coat finish. Drop-in installation; can be
trimmed to fit.
Dim. In.
LxWxH
No.
REV-4WUT-1
22 x 18-1/2 x 2-7/8
REV-4WUT-1SH
22 x 18-1/2 x 2-3/8
REV-4WUT-3
22 x 24 x 2-7/8
REV-4WUT-3SH
22 x 24 x 2-3/8
Unit # 3044183
May be trimmed to fit small drawers.
Dim.
No.
In.
REV-CT-1A-10
DRAWER ORGANIZERS
21-1/4 x 11-1/2
Min. Trim
Size In.
Color
Box
Qty.*
17-3/4 x 8-5/8
Almond
10
REV-CT-1W-10
21-1/4 x 11-1/2
17-3/4 x 8-5/8
White
10
REV-CT-2A-20
21-1/4 x 14-1/4
17-3/4 x 11-5/8
Almond
20
REV-CT-2W-20
21-1/4 x 14-1/4
17-3/4 x 11-5/8
White
20
REV-CT-3A-20
21-1/4 x 17-1/2
17-3/4 x 14-3/4
Almond
20
REV-CT-3W-20
21-1/4 x 17-1/2
17-3/4 x 14-3/4
White
20
REV-CT-4A-10
21-1/4 x 21-7/8
17-3/4 x 18-3/8
Almond
10
REV-CT-4W-10
21-1/4 x 21-7/8
17-3/4 x 18-3/8
White
10
Peg System
Features movable pegs. Maple construction with natural finish. Base measures
21.25” H x 6.625” D. Can be cut to desired size.
* Partial quantities available.
Organizers
Drawer Organizers
Unit # 3044034
UTILITY TRAYS
No.
UT/GUT Series
No.
Pegs
For 27” and Smaller Cabinets
Width
In.
21-1/4” depth. May be trimmed to fit small drawers.
Width
Min. Trim
Case
No.
In.
Size In.
Qty.
White
REV-4DPS-2421
9
For 30” and 33” Cabinets
24.25
REV-4DPS-3021
12
For 36”, 39” and 42” Cabinets
30.25
REV-UT-12W-20 14-1/4
REV-4DPS-3921
11-5/8 x 17-3/4
20
REV-UT-15W-20 17-1/2 14-3/4 x 17-3/4
20
REV-UT-18W-10 21-7/8 18-3/8 x 17-3/4
Almond
10
REV-UT-12A-20
14-1/4
11-5/8 x 17-3/4
20
REV-UT-15A-20
17-1/2 14-3/4 x 17-3/4
20
REV-UT-18A-10
21-7/8 18-3/8 x 17-3/4
10
16
39.25
Accessories
No.
Desc.
REV-4DPSPEG-4
Additional pegs
Unit # 3447034
Unit # 3044032
ROLLING TRAY KITS
Glossy white finish.
Note: In order to provide access to lower tray,
portion of drawer back must be removed. No
depth trimming of lower tray required. Minimum
height refers to cabinet drawer opening.
Dim.
Min. Trim
No.
In.
Size In.
Shallow – 3-1/8” Min. Height
REV-RT 10-3F
11-3/4 x 22
8-3/4 x 21-1/4
REV-RT 12-3F
14-1/2 x 22
11-3/4 x 21-1/4
REV-RT 14-3F
17-3/4 x 22
14-3/4 x 21-1/4
REV-RT 18-3F 21-3/4 x 22 17-3/4 x 21-1/4
Deep – 4-1/8” Min. Height
146
REV-RT 10-4F
11-3/4 x 22
8-3/4 x 21-1/4
REV-RT 12-4F
14-1/2 x 22
11-3/4 x 21-1/4
REV-RT 14-4F
17-3/4 x 22
14-3/4 x 21-1/4
REV-RT 18-4F
21-3/4 x 22
17-3/4 x 21-1/4
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
DRAWER INSERTS
Cutlery
Features 2-1/2” wide slots for organizing cutlery and flatware. Maple construction
with UV-resistant finish. Measures 16-3/4” L.
Width
For Drawer
No.
In.
Width In.
NPCDI-15
9-1/4
15
NPCDI-18
12-1/4
18
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
Drawer Organizers
Unit # 3044079
CUTTING BOARD/KNIFE HOLDERS
Wood Classics™
REV-ST50-21W-12
50 x 21
White
REV-4WCT-1
22 x 14-5/8 x 2-7/8
REV-4WCT-1SH
22 x 14-5/8 x 2-3/8
REV-4WCT-3
22 x 20-5/8 x 2-7/8
REV-4WCT-3SH
22 x 20-5/8 x 2-3/8
REV-ST50-21A-12
50 x 21
Almond
Individual Spice Drawer Inserts
REV-ST-2GW-52
16 x 21-1/4*
Dim. In.
LxWxH
No.
Adjustable for 24” cabinet depth, Base 18” drawers.
Includes knife rest (7-3/4” x 9” x 3/4”), cutting board
(13-3/4” x 20” x 1-1/4”), full-extension slides, mounting
hardware and screws.
Frame Dim. In.
WxDxH
No.
REV-4KCB-18
14-1/2 x 23 x 4-1/2
REV-4KCB-21
17-1/2 x 22-3/4 x 4-3/4
Unit # 3447045
Gloss white
Unit # 3468312
* Minimum inner drawer 11-3/8” x 15-1/2”.
Unit # 3044081
CUTLERY DRAWER SYSTEMS
Shelving
& Hardware
SPICE TRAY DRAWER INSERTS
Decorative
Hardware
Recommended for use with 22” slides for maximum
accessibility.
Size
No.
In.
Color
Universal Spice Trays (Trim to Size)
Adhesives
& Caulk
Birch/maple hardwood
construction with UVcured clear coat finish.
Drop-in
installation;
can be trimmed to fit.
Edgebanding
& Veneers
Unit # 3044127
CUTLERY TRAY DRAWER INSERTS
Unit # 3044036
SPICE TRAY DRAWER INSERTS
KNIFE HOLDER SETS
REV-4SDI-18
16 x 19-3/4 x 1-1/2
Fits Base 24 or Smaller Drawers
REV-4SDI-24
C0100BNL1
11-11/16
C0140BNL1
14-11/16
C0160BNL1
17-11/16
22 x 19-3/4 x 1-1/2
Unit # 3447035
For use in “M” height drawers; attaches to utensil organizer or drawer bottom. Holds up to 9 knives. Dishwasher safe up to 170°F. Includes locating tab and (4)
handle supports.
Dim. In.
No.
LxW
JUL-ZSZ.02M0
11 x 7-1/8
Wood
Products
Dim. In.
WxLxD
Fits Base 18 or Smaller Drawers
Features utensil organizer frame, knife block, cork
insert and hardwood cutting board. Measures 22-1/2” L
x 3-7/8” H.
Width
No.
In.
No.
Storage &
Convenience
Screws &
Fasteners
Unit #3468153
SPICE TRAYS
Lighting
20-11/16
ORGA-LINE
Unit # 3044170
DRAWER INSERTS
Cabinet Locks
& Latches
Spice
KNIFE BLOCK DRAWER INSERTS
Birch/maple hardwood
construction with UVcured clear coat finish.
Features 19 knife slots
and separate utensil
storage compartment.
Drop-in installation; can
be trimmed to fit.
Accommodates all types of spice jars. Birch plywood
construction with UV-resistant finish. Measures 19-1/2”
L x 2” H. Can be cut to required size.
Width
No.
In.
NPSDI1910
10
NPSDI1913
13
NPSDI1916
16
NPSDI1919
19
No.
REV-4WKB-1
Dim. In.
LxWxH
22 x 18-1/2 x 2-3/8
Abrasives
Wood
Includes three spice trays and six locating tabs. Angled
surface allows viewing of stored items. Tray can be
removed from cabinet. Dishwasher safe.
Dim. In.
No.
HxWxL
JUL-ZFZ38G0I
4-3/4 x 11-1/8 x 19-7/8
147
& Machines
C0180BLN1
Drawer Organizers
Unit # 3468150
Unit # 3044054
DRAWER SYSTEMS
Unit #3468112
UTENSIL DRAWER INSERTS
UTENSIL ORGANIZERS
ORGA-LINE
ORGA-LINE
Cosmetic Organizer Plus
Cut-to-size system
offers
maximum
capacity and flexibility. Base tray may
be used by itself in
shallow
drawer
applications or with
6” or 9” rolling top
trays. Rolling trays
are removable for
easy cleaning and
access to base tray.
Glossy white finish.
Dim.
In.
No.
REV-COS-18W-52
14-3/4 x 21-7/8
REV-COS-22W-52
21-3/4 x 21-1/8
Unit # 3044173
JEWELRY DRAWERS
Single
JUL-ZHI533BI1A
JUL-ZHI533MI13A
Flexible organizer system consists of stainless steel
dividers, removable cutlery trays, spring-loaded compensation trays and 1/2” side rails. For cabinets with
5/8” thick drawer sides. Side rails measure 2-9/16”
high.
No. JUL-ZHI533FI1A. Dividers and side rails only;
includes no trays.
Nos. JUL-ZHI533TI4A & JUL-ZHI533TI5A. Adjustable width.
For Drawer
Dim. In.
Insert
No.
WxL
Width In.
For 15” Wide Cabinets
JUL-ZHI457FI1A
11-5/8 x 18
4-1/4
No. REV-CJD-2414. Includes full extension ball bearing slides and drawer dead mounting.
Nos. REV-CJD-24IN and REV-CJD-24IS. Feature
drop in installation and velvet flocked covering.
JUL-ZHI533BI1A
11-5/8 x 21
4-1/4
Drawers
No.
REV-CJD-2414
JUL-ZHI533FI1A
11-5/8 x 21
Triple
Triple Combo
4-1/4
JUL-ZHI457FI3A
11-7/8 x 18
11-9/16
Dim. In.
WxDxH
JUL-ZHI533BI3A
17-5/8 x 21
11-3/16
JUL-ZHI533FI3A
17-5/8 x 21
11-9/16
Features stainless steel dividers and wear-resistant,
dishwasher-safe gray nylon trays. For “M” height drawers.
For Runner
No.
Desc.
Lgth. In.
24 x 14 x 2-1/4
JUL-ZHI457GI3A
17-5/8 x 18
11-7/8
JUL-ZSI500FI1
Single
20
JUL-ZHI533MI3A
17-5/8 x 21
11-7/8
JUL-ZSI550FI1
Single
22
JUL-ZHI533TI4A
17-5/8 x 21
15-3/4 to 16-1/2
JUL-ZSI500FI3
Triple
20
JUL-ZSI550FI3
Triple
22
Drawer Inserts
No.
Desc.
Dim. In.
WxDxH
REV-CJD-24IN
Necklace
22 x 13 x 1-1/2
JUL-ZHI533KI4A
20-5/8 x 21
15
JUL-ZSI500MI3
Triple Combo
20
REV-CJD-24IS
Jewelry
22 x 13 x 1-1/2
JUL-ZHI533TI5A
20-5/8 x 21
18-3/4 to 19-1/2
JUL-ZSI550MI3
Triple Combo
22
Accessories
No.
Desc.
REV-CJD-DMB-KIT
Door mount kit
Unit # 3044158
FILE DRAWER ORGANIZERS
No.
Black wire frame
fastens to drawer
box for stability. Trod divider allows
creation of letter and
legal-size sections.
For Base 18 and 21
cabinets; can be cut
to fit other applications. Includes corner connectors and
mounting screws.
Dim. In.
HxWxD
For Letter-Size Folders
we carry are listed
in this catalog.
please contact
your local branch
for assistance.
REV-RAS-SMFD-52
9-3/4 x 13 x 19-1/4
For Legal-Size Folders
REV-RAS-LGFD-52
148
9-3/4 x 15-7/8 x 19-1/4
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit# 3468111
Unit # 3468125
CUTLERY ORGANIZERS
DRAWER ORGANIZERS
ORGA-LINE
ORGA-LINE
Unit # 3044177
JUL-Z40H1077ANII
Cross divider
Nickel
REV-5WB1-0918-CR
8-3/8 x 18 x 7
A
REV-5WB1-1218-CR
11-3/8 x 18 x 7
11-3/8 x 20 x 7
JUL-Z40H1077A
Cross divider
Gray
A
REV-5WB1-1220-CR
JUL-Z40H000A
Spring connector
Gray
B
REV-5WB1-1222-CR
11-3/8 x 22 x 7
JUL-ZHI533SS65
Interior side rail
Gray
C
REV-5WB1-1520-CR
15-3/8 x 20 x 7
JUL-Z43H100I01
Lateral divider
Nickel
D
REV-5WB1-1522-CR
14-3/8 x 22 x 7
JUL-Z43H100S01
Lateral divider
Gray
D
REV-5WB1-1822-CR
17-3/8 x 22 x 7
REV-5WB1-2122-CR
20-3/8 x 22 x 7
Drawer Organizers & Pull-Out Baskets
Quad
Features stainless steel dividers and wear-resistant,
dishwasher-safe gray nylon trays. For “M” height drawers.
For Runner
Lgth. In.
JUL-ZSI500BI1
Single
20
JUL-ZSI550BI1
Single
22
JUL-ZSI500BI3A
Double
20
JUL-ZSI550BI3A
Double
22
JUL-ZSI500KI4A
Quad
20
JUL-ZSI550KI4A
Quad
22
Unit # 3044096
Unit# 3468243
TRAY DIVIDERS
WIRE BASKETS
ORGA-LINE
Premiere™
Lgth.
In.
JUL-ZSI010Q
3-1/2
ORGA-LINE
REV-5330-12CR
11-1/8
11-3/8
REV-5330-15CR
14-1/8
14-3/8
REV-5330-21CR
20-1/8
20-3/8
REV-5330-33CR
32-1/8
32-3/8
Unit # 3468306
SPRING-LOADED CONNECTORS
Unit # 3044152
Cabinet Locks
& Latches
BASKET DIVIDERS
JUL-ZSI030SI
Premiere
JUL-ZSI020SI
7
JUL-ZSI020SI
10-3/8
For use with cross dividers in “D” height drawers; two
required per application.
No.
Finish
JUL-Z40L002SW
Silk white
JUL-Z40L002TB
Terra black
JUL-Z40L002NI
Nickel
Abrasives
Stainless steel construction with gray nylon endcaps.
Dishwasher-safe. Measures 2-3/8” H x 3-1/2” W.
Lgth.
No.
In.
JUL-ZSI030SI
Wood
Products
CUTLERY TRAYS
No.
For use with 5489 series, 5527-CR, 5330-36CR, 5PD
series, 5207 series and 5200 series baskets. Can be
cut to size. Chrome. Includes (5) arms and (10) fastening clips.
Arm Dim. In.
No.
Dia. x L
REV-5DIV-CR
1/4 x 21-1/4
149
& Machines
Unit# 3468241
For bottom, side or door mounting. Features chromeplated steel spacers for clearance around hinges and
frames, spring-loaded self-closing slides. Measures
22” D x 4-3/4” H. Includes cabinet member slides,
spacers, door brackets and bottom-mounting feet.
Width
Min. Cabinet
No.
In.
Open. In.
Lighting
For dividing single utensil trays. Nylon construction
with spring-loaded ends. Gray.
Storage &
Convenience
Screws &
Fasteners
Desc.
Dim. In.
WxDxH
No.
Shelving
& Hardware
Double
For organizing pots, pans and other large items.
Includes full-extension ball bearing slides and chrome
plated frames. Bottom-mounted.
Gray clip on lateral dividers and spring loaded side
rails to fit Tandem 21” wood drawers. Drawers must be
5/8’’ or 3/4’’ thick with up to 44-5/8’’ interior width. Minimum inside drawer height 5-1/4’’.
No.
Desc.
Finish Fig.
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
PULL-OUT BASKETS
Single
No.
Surfacing
Products
Sinks
Drawer Organizers & Pull-Out Baskets
Pull-Out Organizers
Unit # 3044099
Unit # 3044180
PULL-OUT WIRE BASKETS
FILE DRAWER SYSTEMS
Bottom-Mount – Premiere™
Two-tier design features independently operating racks
to accommodate legal- and letter-size hanging files.
Chrome wire construction.
Features full-extension aluminum slides with springloaded self-closing mechanism, and heavy-gauge
chrome wire baskets.
Nos. REV-5527-15CR & -21CR. Features additional
rack for 2-liter bottles.
For Cabinet
Width
No.
Type
In.
REV-5527-15CR
Base 18
14-1/2
REV-5527-21CR
Base 24
20-1/2
REV-5498-15CR
Base 18
14-1/2
REV-5498-21CR
Base 24
20-1/2
No.
Width
In.
Depth
In.
REV-RAS-FD-KIT
14-3/4
19-3/4 to 24
Pull-Out Organizers
Unit # 3044191
Unit # 3044198
BLIND CORNER ORGANIZERS
UNDERSINK BASKETS
Removable caddy allows storage and transportation
of cleaning supplies. Features adjustable handle and
reversible/removable top tray.
Dim. In.
HxWxD
No.
REV-544-10C-1
Pull-Out
Front baskets pull out and slide over, allowing
rear baskets to be pulled forward. Chromeplated metal construction. Non-handed. 100lb. load rating.
Finish
No.
Dim. In.
HxWxD
REV-5PSP-15-CR
21 x 26-1/4 x 20-1/4
19-1/2 x 11-1/4 x 16-1/4 Chrome
Unit # 3044190
Unit # 3044091
COOKWARE ORGANIZERS
BLIND CORNER ORGANIZERS
Two-Tier
Bottom-mount design. Chrome-plated metal construction.
Features adjustable dividers and 22” full-extension slides
with zinc finish. 100-lb. load rating.
Premiere™
Brings contents forward, allowing use of
entire blind corner cabinets. Baskets surrounded by steel frame. Includes (2) large
chrome baskets, (2) small chrome baskets,
slide and pivot hardware and fasteners.
Chrome.
Note:
Door-mounted hardware may be
adapted for left- or right-hand use.
Dim. In.
HxWxD
No.
REV-5CW2-1222-CR
18 x 11-3/4 x 22
Unit # 3044144
COOKWARE ORGANIZERS
Premiere™
No.
REV-5207-CR
Min. Inside
Dim. In.
WxD
Min.
Door Open.
WxH
34 x 20-1/2
16-1/4 x 23-1/4
Unit # 3447040
REV-5389-CR
PANTRY SYSTEMS
REV-5389-21CR
Chrome wire construction with epoxy clear coat finish to increase durability and
reduce noise.
No. REV-5389-CR. Includes mounting screws.
No. REV-5389-21CR. Includes feet, side mount spacers, door-mount brackets and
full-extension cabinet member slides.
Dim. In.
No.
Desc.
HxWxD
Drop-In
REV-5389-CR
REV-5389-21CR
150
For base 24 or larger drawers
Pull-Out
For base 24 frame or frameless cabinets;
door mounted
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Corner – KitchenMate™
8-3/4 x 17-1/2 x 12
9-1/2 x 20-1/8 x 22
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
For storage of pots, pans, small appliances or bulk items.
Solid maple construction with full-extension slides and
sled-type plywood bottom. Fully assembled; does not
include door. 125-lb. load rating.
Note: Not for use in frameless cabinets.
No.
For Cabinet
Size In.
P0610MNL1
33
P0615MNL1
36
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
Base & Wall Cabinet Organizers & Pantry Systems
Organizers
Organizers
Dim. In.
HxWxD
No.
Dim. In.
HxWxD
No.
REV-444-WC-5SS
REV-448-BC-5C
25.48 x 5.00 x 22.47
REV-448-BC-6C
25.48 x 6.50 x 22.47
REV-448-BC-8C
25.48 x 7.95 x 22.47
REV-448-BC-11C
25.48 x 11.00 x 22.47
REV-448-BC19-5C
25.50 x 5.00 x 19.00
27-7/8 x 5
x 10-3/4
Accessories
Includes board, eraser, markers and marker holder.
No.
Desc.
REV-434-MB-KIT
17” Message board kit
No.
Desc.
P0251DNL1
Double pantry system
P0261DNL1
Center mounting panel
Unit # 3447038
PANTRY SYSTEMS
Single
Accessories
Unit # 3044164
REV-448-SR8-1
Desc.
SHELVING SYSTEMS
Spice rack for REV-448-BC-8C
REV-448-SR11-1
Spice rack for REV-448-BC-11C
Base & Wall Cabinet Organizers & Pantry Systems
Shelving
& Hardware
No.
Unit # 3044186
BASE CABINET ORGANIZERS
Features
adjustable
door mounting brackets for easy installation, and full-extension
“tri-slide” mechanism
for reduced lateral
motion. Wood construction with chrome
accents and stainless
steel panel with accessory hooks. 150-lb.
load rating.
Note: Requires fullheight door.
Dim. In.
HxWxD
REV-444-BC-8SS
25-1/2 x 8 x 22-1/2
For
Cabinet Type
Width
In.
REV-448-WC-5C
Wall 9
5
REV-448-WC-8C
Wall 12
8
Maple hardwood and veneer construction with clear
catalyzed finish. Includes swing-out unit and door unit,
each measuring 51-1/2” H x 12-1/4” W.
Depth. In.
No.
Swing-Out Unit
Door Unit
P0252DNL1
7
3-3/4
Unit # 3447037
PANTRY SYSTEMS
Unit # 3044022
Lighting
No.
No.
Screws &
Fasteners
Three-tier design. Wood construction with chrome rails, fullextension slides and adjustable
door mount brackets. Measures
26-1/4” H x 10-3/4” D. Top of unit
serves as additional shelf in 36”
and 42” applications.
Adhesives
& Caulk
Baltic birch plywood construction with clear finish.
No. P0251DNL1. Includes
12 adjustable shelf fronts;
6 adjustable shelves for
door unit; 6 swing-out
adjustable shelves; two
swing-out units; two door
units; 24 shelf supports;
four 3-1/2” non-mortise
hinges and mounting hardware.
No. P0261DNL1. Includes
two 54-1/2” H x 3/4” W x
7” D mounting blocks and
#8 x 1-1/4” pan head
screw.
Features adjustable door mounting brackets for easy installation,
and
full-extension
“tri-slide”
mechanism for reduced lateral
motion. Wood construction with
chrome accents and stainless
steel panel with accessory
hooks.
Bottom-mount design. Features full-extension ball
bearing slides with zinc finish. Wood construction with
chrome wire accents. 150lb. load rating.
No. REV-448-BC-6C. For
frameless cabinet applications.
Decorative
Hardware
Double
Storage &
Convenience
WALL CABINET ORGANIZERS
Wood
Products
Pull-Out
PANTRY SYSTEMS
Unit # 3044185
Edgebanding
& Veneers
Unit # 3447031
Unit # 3044188
Upper Door
Unit # 3044110
PANTRY SYSTEMS
No.
REV-548-06
Finish
White
No.
REV-6265-22-11-52
White
REV-6265-22-15-52
Almond
P0262DNL1
18-1/2 x 12-1/4 x 3-3/4
* Each unit.
151
Abrasives
Maple hardwood and veneer construction with clear
catalyzed finish. Includes (2) door units.
Dim. In.*
No.
HxWxD
& Machines
Base 9 organizer features reversible slides and 12-1/2”
extension with door-mounting capability. Includes side
spacers for frame cabinets. Measures 5-1/2” W x
19-3/4” L x 19-1/2” D. Slide mounting screws provided.
Includes (5) 22”
diameter independently rotating polymer shelves with
positioner
base
assemblies,
(2)
mounting flanges,
jack screws and
shaft. 1” diameter
telescoping
shaft
system accommodates 56” to 62”
ICH.
Note: Door storage bins sold separately.
Color
Cabinet Locks
& Latches
D-Shaped
Filler Shelves & Vanity Organizers
Unit # 3447015
PILASTER KITS
Unit # 3044161
Unit # 3044189
FILLER SHELVES
Solid aspen construction for use in cabinets
and pantries. Unfinished. Includes 4 pilasters and 4 rails.
Drawers not included.
No.
Lgth.
In.
S1226TUF2
16
S1222TUF2
57
VANITY ORGANIZERS
Base Cabinet
Unit # 3044167
REV-433-BF-9C
Series 432
Converts decorative fillers in base cabinets into functional storage pull-outs. Features adjustable shelves
with ball bearing slides and chrome rails. Wood construction. Measures 30” H x 23” D.
No. REV-433-BF-9C. Includes stainless steel panel
with accessory hooks and pegs.
FILLER SHELVES
Converts decorative fillers into organizational
pull-outs. Features fullextension ball bearing
slides, wood frame with
perforated stainless steel
panels and black pegs for
hanging items.
No.
Width
In.
REV-432-BF-3C
3
REV-432-BF-6C
6
REV-432-BF-9C
9
REV-433-BF-9C
Filler Shelves & Vanity Organizers
9
Bottom-mount design with adjustable shelves and
acrylic bins Features 18” full-extension ball bearing
slides with zinc finish. Maple construction. Measures
8” W x 19” D. 100-lb. load rating.
Ht.
No.
In.
REV-448-VC20-8
20-1/4
REV-448-VC25-8
25-1/2
Unit # 3044197
VANITY ORGANIZERS
Wood Classics™
For installation in fullheight vanity Base 12 cabinets. Features adjustable
shelves, two stainless
steel storage bins with
non-skid liners, polycarbonate rails, full-extension
slides, and adjustable
mounting brackets. Measures 8” W x 19” D.
Includes screws.
Unit # 3044187
FILLER SHELVES
Pull-Out – Tall
Dim. In.
HxWxD
No.
Base Cabinets
REV-434-BF-3SS
No.
30 x 3 x 23
REV-434-BF-6SS
30 x 6 x 23
Wall Cabinets
REV-434-WF-3SS
30 x 3 x 11-1/8
REV-434-WF-6SS
30 x 6 x 11-1/8
Ht.
In.
REV-44S-VCG20-8
Vanity height
9-5/8
REV-44S-VCG25-8
Base height
12-5/8
Unit # 1729096
CLOTHING RACKS
Unit # 3044163
FILLER SHELVES
Wall Cabinet
Converts decorative fillers in
wall cabinets into functional
storage pull-outs. Features
adjustable shelves with ball
bearing slides and chrome
rails.
Wood construction.
Measures 30” H x 11-1/8” D.
Features full-extension ball bearing slides with zinc finish. Measures 6” W x 23” D.
Nos. REV-434-TF39-6SS & -TF45-6SS. Left-handed.
Nos. REV-434-TF39R-6SS & -TF45R-6SS. Righthanded.
Ht.
In.
No.
Wood & Chrome Wire Construction
REV-432-TF39-6C
38-1/2
REV-434-TF39-6SS
38-1/2
Mounts under closet shelves; provides increased
capacity and improved access. Anochrome finish.
Includes screws.
Fits Shelf
No.
Sizes
REV-434-TF39R-6SS
38-1/2
KNA-KV1ANO10
10”
REV-434-TF45-6SS
44-1/2
KNA-KV1ANO12
12” to 16”
REV-434-TF45R-6SS
44-1/2
KNA-KV1ANO16
16” to 20”
KNA-KV1ANO20
20” to 24”
REV-432-TF45-6C
44-1/2
Wood & Stainless Steel Construction
No.
152
Desc.
Width
In.
REV-432-WF-3C
3
REV-432-WF-6C
6
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Towel Bars & Closet Organizers
Sinks
Unit # 3044181
Unit # 1729250
HANGING RODS
Spiral
Adhesives
& Caulk
CLOTHING RACKS
Premiere™
.43
5/8 to 8-1/4
REV-TBC-14TCR
Unit # 1729076
TOWEL BARS
REV-TRC-14CR
Fully assembled with full-extension slides. Instructions
included.
No. REV-TBC-14TCR. Tie/belt rack with tray. Chrome.
Holds 20 ties, 5 belts and 4 peg-closure belts.
No. REV-TRC-14CR. Chrome rack holds 25 ties.
Dim. In.
No.
WxHxD
REV-TBC-14TCR
6 x 5 x 14
REV-TRC-14CR
Towel Bars & Closet Organizers
3 x 2 x 14
For use in corner closets. Features 360° rotation.
Accommodates up to 40 items of clothing. Min. cabinet
size 48” x 48”. Includes stabilizer bar, hardware and
screws.
No.
Width
In
Ht.
In.
Cap.
Lbs.*
REV-SHR-3684
23
72-1/2 to 84
130
* When attached to floor rather than cabinet bottom.
Shelving
& Hardware
KNA-753ANO
Decorative
Hardware
Provides 7-3/4” hanging space. Brass knobs and anachrome flanges. Packed 12 per case.
Dia.
Extension
No.
In.
Lgth. In.
Unit # 3044194
Unit # 3044195
KNA-P793ANO
1-3/4 x 5 x 18
SCARF/TIE/BELT ORGANIZERS
SHOE RAILS
Designer Series
Finish
Screws &
Fasteners
Features friction-free ball bearing carrier.
Dim. In.
No.
HxWxD
Extension
Edgebanding
& Veneers
Unit # 3044072
TIE/BELT RACKS
Anochrome
Lgth.
In.
No.
REV-563-47 C
Dim. In.
WxDxH
Chrome
11-7/8 to 18-1/2
Satin nickel
REV-CTR-12-ORB
11-7/8 to 18-1/2
Oil-rubbed
bronze
REV-CTR-14-CR
13-7/8 to 21-7/8
Chrome
REV-CTR-14-SN
13-7/8 to 21-7/8
Satin nickel
REV-CTR-14-ORB
13-7/8 to 21-7/8
Oil-rubbed
bronze
Finish
REV-563-47
5 x 17-3/4 x 1-1/4
White
REV-563-47 C
5 x 17-3/4 x 1-1/4
Chrome
REV-563-51 C
3-7/8 x 12-7/8 x 1-1/2
Chrome
REV-CBSR-12-CR
11-7/8 to 18-1/2
Chrome
REV-CBSR-12-SN
11-7/8 to 18-1/2
Satin nickel
REV-CBSR-12-ORB 11-7/8 to 18-1/2
Oil-rubbed
bronze
REV-CBSR-14-CR
13-7/8 to 21-7/8
Chrome
REV-CBSR-14-SN
13-7/8 to 21-7/8
Satin nickel
REV-CBSR-14-ORB 13-7/8 to 21-7/8
Oil-rubbed
bronze
29
35
REV-CSR-35CR-10
Satin Nickel
REV-CSR-17SN-10
17
REV-CSR-23SN-10
23
REV-CSR-29SN-10
29
REV-CSR-35SN-10
Oil-Rubbed Bronze
35
REV-CSR-17ORB-10
17
REV-CSR-23ORB-10
23
REV-CSR-29ORB-10
29
REV-CSR-35ORB-10
35
153
Lighting
11-7/8 to 18-1/2
REV-CTR-12-SN
Belt/Scarf Organizers
REV-563-51 C
Mounting screws included.
Nos. REV-563-47 & -47 C. Features 3 prongs and 12”
extension for easy access. Mount vertical or horizontal.
No. REV-563-51 C. Two-prong design with side-mount
ball bearing slides.
No.
REV-CTR-12-CR
23
REV-CSR-29CR-10
Cabinet Locks
& Latches
563 Series
17
REV-CSR-23CR-10
Abrasives
TOWEL BARS
Chrome
REV-CSR-17CR-10
& Machines
Features 8-3/16” telescoping rod, non-slip PVC coated
hooks, and adjustable mounting brackets.
Tie/Scarf Organizers. Hold up to 15 ties or scarves.
Belt/Scarf Organizers. Hold up to 6 belts.
Lgth.
No.
In.
Finish
Tie/Scarf Organizers
Wood
Products
2-1/4” height.
Storage &
Convenience
Unit # 3044045
Baskets, Tray Dividers, Pull-Down & Fold-Out Organizers
Unit # 3044030
Unit # 3044083
Unit # 3044044
RATTAN BASKETS
SHELVING SYSTEMS
TRAY DIVIDERS
Wood Classics™
Pull-Down – Premiere™
Individual packs. Include polymer liner and (2) 2” side
mount rails.
Euro rail baskets. Include polymer liner and (2) 29mm
side mount rails.
Dim.
WxDxH
Individual Packs
No.
Vertical
REV-4WB-15I
11-1/4” x 21-1/4” x 7-3/8”
REV-4WB-18I
14-1/4” x 21-1/4” x 7-3/8”
Euro Rail Baskets
REV-4WB-520I
U-Shaped
Wire construction.
Vertical. Each set includes dividers with screw-in clips
and fasteners.
U-Shaped. For storage of platters and baking trays in
wall or base cabinets. 3” wide.
520mm x 540mm x 188mm
Two-tiered shelf descends 10” and pulls out 14-3/4”
from cabinet. Features gas-assisted lifting and lowering mechanism for stability while in motion. Includes
mounting brackets, screws and installation instructions.
Chrome-plated metal construction.
Min. Open. In.
WxDxH
No.
Dim. In.
HxD
Vertical
Finish
REV-597-12-10
12 x 20
White
RATTAN BASKETS
REV-597-12-52
12 x 20
White
1
Wood Classics™
REV-597-12CR-10
12 x 20
Chrome
10
REV-597-12CR-52
12 x 20
Chrome
1
IRONING BOARDS
REV-597-18-10
18 x 20
White
10
Fold-Out – Vanity
REV-597-18-52
18 x 20
White
1
REV-597-18CR-10
18 x 20
Chrome
10
REV-597-18CR-52
18 x 20
U-Shaped
Chrome
1
REV-596-10CR-52
10 x 11-7/8
Chrome
1
Baskets, Tray Dividers, Pull-Down & Fold-Out Organizers
Unit # 3044135
No.
Qty.
REV-5PD-24CR
20-1/4 x 10-1/2 x 18-5/16
REV-5PD-36CR
32 x 10-1/2 x 18-5/16
10
Unit # 3044172
No.
Dim. In.
WxDxH
RS-4WB-1419-52
14-1/2 x 19 x 11-1/4
1
Features ball-bearing slides, chrome finish, expandable frame and fixed brackets for drawer fronts.
Mounts in vanity drawer in cabinets with sides from
14-1/4” to 21” wide; requires 4” min. opening height.
Dim. In.
No.
DxH
REV-4WB-411-4
4 x 10-7/8 x 4-1/4
4
REV-VIB-20CR
Includes cloth liner.
Unit # 3447036
Qty.
REV-4WB-1723-52 17-1/2 x 22-3/4 x 11-1/4
1
REV-4WB-421-4
4
4-1/2 x 21-1/4 x 4-1/2
20 x 4
TRAY ORGANIZERS
Unit # 3044067
Tra-Sta
MIXER/APPLIANCE LIFTS
Rev-A-Lift
Our pledge is
customer service.
For storage of cookie sheets, muffin pans, baking
trays, pots, pans or lids. Includes (8) drilled rails and
(4) maple veneer dividers. Can be cut to required size.
Dim. In.
No.
LxW
TS2424
24 x 24
Lifting mechanism locks in closed and open positions;
unlocks with release levers. Dual tension springs for
smooth raising and lowering. Requires 17-9/16” clearance from work area when in stowed position.
Swing
Load
No.
Depth In.
Cap. Lbs.
REV-RAS-ML-HDCR
154
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
22-7/16
60
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Stemware Racks & Media Storage
Sinks
Unit # 3044174
Unit # 3013002
MEDIA STORAGE BINS
Chrome
Chrome
Satin Nickel
Satin Nickel
Satin Nickel
Brass
Brass
Brass
Oil-rubbed bronze
4-1/4 x 16 x 1-1/2
4-1/4 x 18 x 1-1/2
4-1/4 x 11 x 1-1/2
4-1/4 x 16 x 1-1/2
4-1/4 x 18 x 1-1/2
4-1/4 x 11 x 1-1/2
4-1/4 x 16 x 1-1/2
4-1/4 x 18 x 1-1/2
4-1/4 x 11 x 1-1/2
REV-3150-16ORB
REV-3150-18ORB
Oil-rubbed bronze
Oil-rubbed bronze
Double Bottle Racks
4-1/4 x 16 x 1-1/2
4-1/4 x 18 x 1-1/2
Chrome
Satin Nickel
Brass
Quad Stemware Holders
4-1/4 x 9 x 5/8
4-1/4 x 9 x 5/8
4-1/4 x 9 x 5/8
Decorative
Hardware
CPF4470
17 x 11 x 1-1/2
17 x 11 x 1-1/2
Storage &
Convenience
Chrome
Satin Nickel
CPF4450
Holds 8 DVD or CD cases. Black.
No. CPF4450. Includes 5mm pins for mounting.
No. CPF4470. Stick-on.
Dim.
In.
No.
CPF4450
6-1/4 x 5-7/8
CPF4470
6-1/4 x 5-3/4
Unit # 3013001
to serve you:
Lighting
MEDIA STORAGE RACKS
Vertical
Cabinet Locks
& Latches
• Kansas City, KS
• Wichita, KS
• Springfield, MO
• Tulsa, OK
Abrasives
REV-3450-11CR
REV-3450-11SN
MEDIA STORAGE RACKS
For storage of CDs in entertainment centers, computer desks and similar applications. Features touch-release system; discs pop out of rack when pressed. 32mm
mounting hole spacing.
Dim.
No.
No.
mm
Discs
CPF4600
319.5 x 158.5
20
155
& Machines
REV-3250CR
REV-3250SN
REV-3250BR
12.8 x 5.53 x 5.51
Unit # 3013020
REV-3150-16CR
REV-3150-18CR
REV-3150-11SN
REV-3150-16SN
REV-3150-18SN
REV-3150-11BR
REV-3150-16BR
REV-3150-18BR
REV-3150-11ORB
CPF9001
Stemware Racks & Media Storage
Shelving
& Hardware
Heavy gauge wire construction. Features hidden mounting plate for installation
under cabinets.
Dim. In.
No.
Finish
WxDxH
Stemware Holders
REV-3150-11CR
Chrome
4-1/4 x 11 x 1-1/2
Portable bin holds up to (24) CD-ROM or (56) 3-1/2” floppy discs. Fits into desk
drawers or cabinets; includes lip for use in hanging file drawers. Black.
Dim. In.
No.
LxWxH
Screws &
Fasteners
REV-3450-11SN
Wood
Products
REV-3150-11CR & REV-3250CR
Adhesives
& Caulk
Edgebanding
& Veneers
STEMWARE & WINE RACKS
Media Storage & Utility Hooks
NOTES
Unit # 3044059
ENTERTAINMENT CENTER
ORGANIZERS
For audio and video cassettes. Rails may be attached
to any drawer bottom or shelf area using screws or
included adhesive strips. Black polystyrene construction. 1-1/2” W x 12-1/2” D x 1-9/16” H. 5 pairs per pkg.
No.
Desc.
REV-370-ACN-10
Cassettes/DVD
Cap.
16
REV-371-VCR-10
VCR
10
REV-372-CD-10
CD
Media Storage & Utility Hooks
24
Unit # 1729001
UTILITY HOOKS
Steel construction with Anochrome finish. 10 per box.
Includes screws.
Lgth.
No.
In.
KNA-PKV3ANO5-1/2
5-1/2
KNA-PKV3ANO10
10
Unit # 1729144
GARMENT HOOKS
Chrome finish.
screws.
12 per box with
No.
Ht.
In.
Proj.
Lgth. In.
KNA-P2038CHR
5-1/4
3
Unit # 1729122
UTILITY HOOKS
Commercial
Anochrome finish. Includes screws. 12 per package.
Lgth.
No.
In.
KNA-1132ANO3
3
KNA-1132ANO4
4
KNA-1132ANO6
6
KNA-1132ANO10
10
156
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Width
In.
Wood
Species
No.
Nom.
Sz. In.
R2142SMS1OUF
42
Red oak
090AB42SX1
42
40.38 x 18.25 Stainless steel
R2142SMS1MUF
42
Maple
090AB48SX1
48
R2142SMS1CUF
42
Cherry
092AB36SX1
36
R2142SMS1HUF
42
Hickory
092AB42SX1
42
R2142SMS1QUF
42
Alder
092AB48SX1
48
R2148SMS1OUF
48
Red oak
Straight
R2148SMS1MUF
48
Maple
090SB36SM1
36
34.44 x 18.25
Silver metallic
R2148SMS1CUF
48
Cherry
090SB42SM1
42
40.44 x 18.25
Silver metallic
R2148SMS1HUF
48
Hickory
090SB48SM1
48
46.44 x 18.25
Silver metallic
Alder
090SB36SX1
36
090SB42SX1
42
090SB48SX1
48
092SB36SX1
36
092SB42SX1
42
092SB48SX1
48
Arched
RANGE HOODS
Accommodates Serius SUT90070M/W or SUT90052W
blowers. Features epoxy coated liner. Includes mounting hardware.
Series R2630 & R2130. For use with SUT90052W
blower only.
Width
Wood
No.
In.
Species
Arched
Red oak
R2630SMS1MUF
30
Maple
Wood
Species
No.
30” Width
30
Cherry
R1630CUF1
Cherry
R2630SMS1HUF
30
Hickory
R1630HUF1
Hickory
R2630SMS1QUF
30
Alder
R1630MUF1
Maple
Red oak
R2636SMS1OUF
36
Red oak
R2636SMS1MUF
36
Maple
R1630QUF1
R2636SMS1CUF
36
Cherry
R2636SMS1HUF
36
Hickory
R2636SMS1QUF
36
Alder
R2642SMS1OUF
42
Red oak
R2642SMS1MUF
42
Maple
R2642SMS1CUF
42
Cherry
R2642SMS1HUF
42
Hickory
R2642SMS1QUF
42
Alder
R2648SMS1OUF
48
Red oak
R2648SMS1MUF
48
Maple
R2648SMS1CUF
48
Cherry
R2648SMS1HUF
48
Hickory
R2648SMS1QUF
48
Straight
Alder
R2130SMS1OUF
30
Red oak
R2130SMS1MUF
30
Maple
R2130SMS1CUF
30
Cherry
R2130SMS1HUF
30
Hickory
R2130SMS1QUF
30
Alder
R2136SMS1OUF
36
Red oak
R2136SMS1MUF
36
Maple
R2136SMS1CUF
36
Cherry
R2136SMS1HUF
36
Hickory
R2136SMS1QUF
36
Alder
Wireless w/ remote control
SUT90070M
Sinks
Edgebanding
& Veneers
Manual
3447019
R2630SMS1CUF
R1630OUF1
SUT90070W
Screws &
Fasteners
30
Unit # 3447041
VENTILATION SYSTEMS
Range Hood – Rangemaster
Storage &
Convenience
R2630SMS1OUF
4-speed design with dual 20W halogen lamps.
Brushed stainless steel construction with aluminum filters. 27” wide. 600 CFM. 3.9 Sones.
No.
Desc.
Shelving
& Hardware
Range Hood – Serius
Mounts between cabinets.
Solid wood and veneer
construction with 6” apron
and metallic silver liner.
Accepts RHVBF10SM or
RHVBB20SM ventilation
systems.
Unit # 3447032
BLOWERS
Select Series
Straight
Adhesives
& Caulk
Unit # 3447042
Decorative
Hardware
R2148SMS1QUF
48
Range Hoods & Ventilation Systems
Alder
36” Width
R1636CUF1
Cherry
R1636HUF1
Hickory
R1636MUF1
Maple
R1636OUF1
Red oak
R1636QUF1
Alder
Unit # 3447044
RANGE HOOD LINERS
For
use
with
RHVBB20SM,
RHVBF10SM,
RHVBB30SS or RHVBH2 ventilation systems. Features 19-7/16” x 10-3/16” opening.
Nom.
Dim. In.
No.
Sz. In.
WxD
Finish
Rectangular
090656SM2
30
28.50 x 18.25
Silver metallic
090657SM2
36
34.50 x 18.25
Silver metallic
090658SM2
30
28.50 x 24.25
Silver metallic
090659SM2
36
34.50 x 24.50
Notched
Silver metallic
090654SM2
30
29.94 x 16.50
Silver metallic
090655SM2
36
35.94 x 16.50
Arched
Silver metallic
RHVBB30SS
RHVBHLB11
For use with Signature Series hood liners. Requires
minimum 10-1/4” x 19-1/2” opening. UL and CUL
listed, HVI certified.
No. RHVBB30SS. Stainless steel construction with 3speed pushbutton control and removable grease filters.
Features dual 60W halogen lights.
No. RHVBHLB11. Works independently of internal
blowers. Features noise-reducing motor mount and
balance wheel design. Requires RHVBH2 housing.
No. RHVB336. Features unobtrusive, weather-resistant design. Mounts on roof or outside wall. Requires
RHVBH2 housing.
Ventilation Systems
No.
Desc.
RHVBB30SS
Internal blower
500
RHVBHLB11
In-line blower
1100
Exterior blower
1500
RHVB336
CFM
Accessories
No.
Desc.
For Use
With Blower
090AB36SM1
36
34.44 x 18.25
Silver metallic
RHVACC634 3-1/4” x 10” Roof cap
RHVBHLB11
090AB42SM1
42
40.44 x 18.25
Silver metallic
RHVACC414
RHVBHLB11
090AB48SM1
48
46.44 x 18.25
Silver metallic
090AB36SX1
36
RHVBH2
8” to 10” Expander
RHVBHLB11 &
In-line/exterior housing
RHVB336
157
Wood
Products
Wall-Mount – Signature Series
Lighting
RANGE HOODS
Cabinet Locks
& Latches
Unit # 3447033
Finish
Abrasives
Wood Products
Dim. In.
WxD
& Machines
No.
Surfacing
Products
Range Hoods & Ventilation Systems
Appliance Garages, Tambour Door Sets & Wine Racks
Unit #3447003
Unit #3447004
TAMBOUR DOOR SETS
WINE RACKS
Lattice – Standard
Lattice mouldings 3/4”
thick x 7/16” wide,
with plain face and
glued square edges.
3-3/4” x 3-3/4” bottle
openings.
Unit # 3447043
VENTILATION SYSTEMS
Range Hood
Flush-fit design for use with Select Series hood liners.
Features metallic silver finish and removable aluminum
grease filter. Includes damper and adapter for ducted
applications. Accepts dual 40W lights (not included).
No. RHVBB20SM. Features 3-speed slide control.
No. RHVBF10SM. Features 2-speed rocker control.
Includes door and spring tension track system with two
PVC guide rails, wood dowel, donut and tension
spring. 18” door height. For appliance garage fabrication.
Ventilation Systems
No.
Desc.
CFM
RHVBB20SM
Centrifugal blower
390
RHVBF10SM
Fan
250
Accessories
Allows ducting of range hood exhaust back into
kitchen. Includes metal grille, adjustable collar, angle
boot, 7” round pipe, 7” x 6” reducer, charcoal filter and
clips.
No.
Desc.
90358DUC1
Ducting kit
Appliance Garages, Tambour Door Sets & Wine Racks
Door
Width In.
Solid Wood
No.
Wood
Species
Straight
Wood
Species
No.
Corner
A0100OUF1
Red oak
A0100MUF1
Maple
A0100CUF1
Cherry
A0100HUF1
Hickory
A0100AUF1
Ash
A0100QUF1
Alder
Straight
A0160OUF1
Red oak
A0160MUF1
Maple
A0160CUF1
Cherry
A0160HUF1
Hickory
A0160AUF1
Ash
A0160QUF1
L3080OUF9
Red oak
2
Red oak
L3080OUF2
Red oak
10
C02-SRO-2
24
Red oak
L3080MUF9
Maple
2
C02-SRO-3
30
Red oak
L3080MUF2
Maple
10
C02-SMA-1
15
Maple
L3080HUF9
Hickory
2
C02-SMA-2
24
Maple
L3080HUF2
Hickory
10
C02-SMA-3
30
Maple
L3080CUF9
Cherry
2
C02-SHI-1
15
Hickory
L3080CUF2
Cherry
10
C02-SHI-2
24
Hickory
L3080AUF9
Ash
2
C02-SHI-3
30
Hickory
L3080AUF2
Ash
10
C02-SCH-1
15
Cherry
L3080QUF9
Alder
C02-SCH-2
24
Cherry
L3080QUF2
C02-SCH-3
30
Veneer
Cherry
L3060OUF9
Red oak
2
C02-VRO-1
15
Red oak
L3060OUF2
Red oak
10
C02-VRO-2
24
Red oak
L3060MUF9
Maple
2
C02-VRO-3
30
Red oak
L3060MUF2
Maple
10
C02-VMA-1
15
Maple
L3060HUF9
Hickory
2
C02-VMA-2
24
Maple
L3060HUF2
Hickory
10
C02-VMA-3
30
Maple
L3060CUF9
Cherry
2
C02-VHI-1
15
Hickory
L3060CUF2
Cherry
10
C02-VHI-2
24
Hickory
L3060AUF9
Ash
C02-VHI-3
30
Hickory
L3060AUF2
C02-VCH-1
15
Cherry
C02-VCH-2
24
Cherry
L3040OUF9
Red oak
2
30
Cherry
Medium Density Fiberboard
L3040OUF2
Red oak
10
C02-VCH-3
Alder
17” x 36” – 14 Openings
Ash
23” x 29” – 17 Openings
2
10
2
10
L3040MUF9
Maple
2
C02-MOO-1
15
Paintable
L3040MUF2
Maple
10
C02-MOO-2
24
Paintable
L3040HUF9
Hickory
2
C02-MOO-3
30
Paintable
L3040HUF2
Hickory
10
C02-MWH-1
15
Painted, White
L3040CUF9
Cherry
2
C02-MWH-2
24
Painted, White
L3040CUF2
Cherry
10
C02-MWH-3
30
Painted, White
L3040AUF9
Ash
L3040AUF2
We are continually
Call us with your
inquiries.
158
Pkg.
Qty.
15
Alder
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wood
Species
17” x 29” – 11 Openings
C02-SRO-1
Unit # 3447020
APPLIANCE GARAGES
No.
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Ash
23” x 42” – 27 Openings
2
10
L3020OUF9
Red oak
2
L3020OUF2
Red oak
10
L3020MUF9
Maple
2
L3020MUF2
Maple
10
L3020HUF9
Hickory
2
L3020HUF2
Hickory
10
L3020CUF9
Cherry
2
L3020CUF2
Cherry
10
L3020AUF9
Ash
2
L3020AUF2
Ash
10
L3020QUF9
Alder
2
L3020QUF2
Alder
10
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
WINE RACKS
Lattice – Deluxe
36” Length
L3320HUF9
Hickory
2
L3320HUF2
Hickory
10
SR-36-RO
Maple
Red oak
L3320CUF9
Cherry
2
SR-36-MA
L3320CUF2
Cherry
10
SR-36-HI
Hickory
L3320AUF9
Ash
2
SR-36-CH
Cherry
L3320AUF2
Ash
10
SR-36-AL
Alder
L3320QUF9
Alder
2
L3320QUF2
Wine & Stemware Racks
Alder
10
Unit #3447009
STEMWARE RACKS
Unit # 3447030
WINE RACKS
Sinks
Wood
Species
No.
Adhesives
& Caulk
Unit #3447005
Pkg.
Qty.
Edgebanding
& Veneers
Wood
Species
No.
Surfacing
Products
Moulding
10
L3380MUF9
Maple
2
L3380MUF2
Maple
10
L3380HUF9
Hickory
2
L3380HUF2
Hickory
10
L3380CUF9
Cherry
2
L3380CUF2
Cherry
10
L3380AUF9
Ash
2
L3380AUF2
Ash
10
L3380QUF9
Alder
2
Alder
17” x 36” – 14 Openings
10
L3360OUF9
Red oak
2
L3360OUF2
Red oak
10
L3360MUF9
Maple
2
L3360MUF2
Maple
10
L3360HUF9
Hickory
2
L3360HUF2
Hickory
10
L3360CUF9
Cherry
2
L3360CUF2
Cherry
10
L3360AUF9
Ash
L3360AUF2
Ash
23” x 29” – 17 Openings
Modular, folding X-shaped design constructed from
3/4” x 7/16” hardwood mouldings.
Leg
Wood
No.
Lgth. In.
Species
Fits 18” Wide Cabinets
“T” Moulding
Solid wood construction. 62” length. 12 per pkg.
Wood
No.
Species
“L” Moulding
WS100OUF1
22-3/8
Red oak
SR-L-62RO
WS100MUF1
22-3/8
Maple
SR-L-62MA
Maple
WS100HUF1
22-3/8
Hickory
SR-L-62CH
Cherry
WS100CUF1
22-3/8
Cherry
SR-L-62HI
WS100QUF1
WS110OUF1
22-3/8
Fits 24” Wide Cabinets
26-5/8
Alder
Red oak
Hickory
“T” Moulding
SR-T-62RO
Red oak
Red oak
SR-T-62MA
Maple
Cherry
Hickory
WS110MUF1
26-5/8
Maple
SR-T-62CH
WS110HUF1
26-5/8
Hickory
SR-T-62HI
WS110CUF1
26-5/8
Cherry
WS110QUF1
26-5/8
Alder
Unit # 3447010
PLATE DISPLAYS
Unit #3447008
STEMWARE RACKS
2
10
L3340OUF9
Red oak
2
L3340OUF2
Red oak
10
L3340MUF9
Maple
2
L3340MUF2
Maple
10
Lighting
L3380QUF2
“L” Moulding
Shelving
& Hardware
2
Red oak
Screws &
Fasteners
Red oak
L3380OUF2
Wood
Products
L3380OUF9
Storage &
Convenience
Lattice mouldings 3/4” W x 7/16” thick with routed face,
square edges and glued and mechanically fastened
joints. 3-3/4” x 3-3/4” bottle openings. Can be cut to
size.
Wood
Pkg.
No.
Species
Qty.
17” x 29” – 11 Openings
Decorative
Hardware
Russian River
Solid wood construction. 12” wide.
Hickory
2
L3340HUF2
Hickory
10
SR-18-MA
Maple
L3340CUF9
Cherry
2
SR-18-HI
Hickory
Features (6) pairs of 3/8” dia. fluted dowels spaced 2”
on-center, and pre-drilled top and bottom rails. 36”
wide.
Wood
No.
Species
L3340CUF2
Cherry
10
SR-18-CH
Cherry
P1100OUF2
2
SR-18-AL
Alder
P1100MUF2
Maple
P1100HUF2
Hickory
Red oak
P1100CUF2
Cherry
P1100QUF2
Alder
L3340AUF9
L3340AUF2
L3320OUF9
Ash
Ash
23” x 42” – 27 Openings
Red oak
18” Length
Red oak
30” Length
10
SR-30-RO
2
SR-30-MA
Maple
Hickory
L3320OUF2
Red oak
10
SR-30-HI
L3320MUF9
Maple
2
SR-30-CH
Cherry
10
SR-30-AL
Alder
L3320MUF2
Maple
Red oak
159
Abrasives
L3340HUF9
SR-18-RO
& Machines
Wood
Species
No.
Cabinet Locks
& Latches
Valances, Galley Rails, Breadboards & Brackets
Unit # 3447019
VALANCES
English Country
For use below or between cabinets or as top rail in face
frame. Measures 5” H x 3/4” D. Back side relieved to
accommodate accent panel.
Wood
No.
Species
25” Length
Wood
Species
G9180OUF2
96
Red oak
G9180MUF2
96
Maple
G9180HUF2
96
Hickory
G9180CUF2
96
Cherry
G9180AUF2
96
Mini Plate
Ash
G9360OUF2
72
Red oak
G9360MUF2
72
Maple
G9360CUF2
72
Cherry
G9360AUF2
72
Ash
G9380OUF2
96
Red oak
G9380MUF2
96
Maple
G9380CUF2
96
Cherry
Unit # 3447029
SUPPORT BRACKETS
Pair.
Wood
Species
No.
8” x 6”
S1102OUF2
Red oak
S1102MUF2
Maple
S1102CUF2
Cherry
S1102HUF2
Hickory
S1102QUF2
Alder
10” x 8”
G9380AUF2
96
Ash
Valances, Galley Rails, Breadboards & Brackets
S1101OUF2
Red oak
Maple
S1101CUF2
Cherry
Hickory
S1101HUF2
Hickory
Cherry
S1101QUF2
Alder
Red oak
EC-25-MA
Maple
EC-25-HI
EC-25-AL
Lgth.
In.
S1101MUF2
EC-25-RO
EC-25-CH
No.
Unit # 3406001
Alder
37” Length
EC-37-RO
Red oak
EC-37-MA
Maple
EC-37-HI
Hickory
EC-37-CH
Cherry
EC-37-AL
Alder
Unit# 3893027
BREADBOARDS
Solid Hardwood
49” Length
EC-49-RO
Red oak
EC-49-MA
Maple
EC-49-HI
Hickory
EC-49-CH
Cherry
EC-49-AL
WALL BRACKETS
Alder
Unit #3447023
GALLEY RAILS
Electronically laminated, sealed against moisture. 22”
L x 3/4” thick. Alder body.
Wdth.
No.
In.
For use along top of bookshelves and cabinetry.
Sanded; unfinished.
Lgth.
Wood
No.
In.
Species
Standard
BB1222
BB1822
18
G9060OUF2
72
BB2422
24
G9060MUF2
72
Maple
G9060HUF2
72
Hickory
G9060CUF2
72
Cherry
G9060AUF2
72
Ash
G9080OUF2
96
Red oak
G9080MUF2
96
Maple
G9080HUF2
96
Hickory
G9080CUF2
96
Cherry
G9080AUF2
96
Corner
Ash
G9160OUF2
72
Red oak
Red oak
G9160MUF2
72
Maple
G9160HUF2
72
Hickory
G9160CUF2
72
Cherry
G9160AUF2
72
Ash
160
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
12
BB1422
14
BB1622
16
Dim. In.
WxHxD
Species
WHI-CRV5622CH
1-1/2 x 12 x 11
Cherry
WHI-CRV5622MA
1-1/2 x 12 x 11
Maple
WHI-CRV5624CH
1 x 6 x 5-1/2
Cherry
WHI-CRV5624MA
1 x 6 x 5-1/2
Maple
No.
Unit# 3893094
CARVED CORBELS
Need help with
specifications?
will be happy to
assist you!
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Imbricated Bracket
Lindenwood construction.
No.
Dim. In.
WxHxD
WHI-CRV5226LW
14 x 24 x 9
WHI-CRV5228LW
8 x 16 x 7
WHI-CRV5230LW
6 x 15 x 9
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Dim. In.
W* x H x D
Acanthus w/ Shell
WHI-CRV5120CH
6 x 14 x 2-1/2
Cherry
CORBELS
WHI-CRV5120LW
6 x 14 x 2-1/2
Lindenwood
Acanthus
WHI-CRV5120MA
6 x 14 x 2-1/2
Maple
WHI-CRV5121CH
4-1/2 x 10 x 1-3/4
Cherry
WHI-CRV5121LW
4-1/2 x 10 x 1-3/4 Lindenwood
WHI-CRV5121MA
4-1/2 x 10 x 1-3/4
Unit # 4031022
Sinks
Species
Edgebanding
& Veneers
No.
Surfacing
Products
Corbels
Unit# 3893016
CARVED CORBELS
Acanthus – Spool
Maple
* Measured at the widest point.
Bar Bracket – Acanthus
No.
Species
Small – 10” H x 5-1/4” W x 4-5/8” D
CORBEL-A-1-AL
Alder
CORBEL-A-1-CH
Cherry
CORBEL-A-1-MP
Maple
CORBEL-A-1-RO
Red oak
Sold 2/card.
Dim. In.
W* x H x D
Species
WHI-CRV5568CH
3-3/8 x 5-1/2 x 1-1/8
Cherry
WHI-CRV5568MA
3-3/8 x 5-1/2 x 1-1/8
Maple
CORBEL-A-1-RW
Rubberwood
Medium – 14” H x 7” W x 5” D
WHI-CRV5570CH
3-3/8 x 3-3/4 x 3/4
Cherry
WHI-CRV5570MA
3-3/8 x 3-3/4 x 3/4
Maple
CORBEL-A-2-AL
Alder
WHI-CRV5572CH
2-5/8 x 5-1/2 x 1-1/8
Cherry
CORBEL-A-2-CH
Cherry
WHI-CRV5572MA
2-5/8 x 5-1/2 x 1-1/8
Maple
CORBEL-A-2-MP
Maple
WHI-CRV5574CH
2-5/8 x 3-3/4 x 3/4
Cherry
WHI-CRV5574MA
2-5/8 x 3-3/4 x 3/4
Maple
CORBEL-A-2-RO
Red oak
CORBEL-A-2-RW
Corbels
Rubberwood
No.
Measures 13” H x 7-3/4” W x 3-1/2” D.
No.
Species
CORB-A-4-AL
Alder
CORB-A-4-CH
Cherry
CORB-A-4-MP
Maple
CORB-A-4-RO
Red oak
CORB-A-4-RW
Rubberwood
Shelving
& Hardware
CORBELS
Decorative
Hardware
Adhesives
& Caulk
Unit # 4031017
Screws &
Fasteners
Unit# 3893045
Unit# 3893015
CARVED CORBELS
Acanthus – Leaf
Storage &
Convenience
Unit # 4031018
CORBELS
Low Profile – Acanthus
Dim. In.
W* x H x D
Species
WHI-CRV5576CH
3-1/2 x 4-1/4 x 3/4
Cherry
WHI-CRV5576MA
3-1/2 x 4-1/4 x 3/4
Maple
WHI-CRV5578CH
2-1/2 x 3 x 1/2
Cherry
WHI-CRV5578MA
2-1/2 x 3 x 1/2
Maple
Acanthus
No.
Acanthus w/ Shell
Dim. In.
W* x H x D
Acanthus
No.
Species
WHI-CRV5119CH
7 x 22 x 3-1/4
Cherry
WHI-CRV5119LW
7 x 22 x 3-1/4
Lindenwood
WHI-CRV5119MA
7 x 22 x 3-1/4
Maple
WHI-CRV5097CH
7-7/8 x 14-1/2 x 6
Cherry
WHI-CRV5097LW
7-7/8 x 14-1/2 x 6 Lindenwood
WHI-CRV5097MA
7-7/8 x 14-1/2 x 6
Maple
WHI-CRV5098CH
5 x 12 x 4-1/2
Cherry
WHI-CRV5098LW
5 x 12 x 4-1/2
Lindenwood
WHI-CRV5098MA
5 x 12 x 4-1/2
Maple
Dim. In.
HxWxD
CORB-A-6-MP
8 x 3-1/2 x 1-1/2
CORB-A-7-MP
10 x 4-1/2 x 1-3/4
Abrasives
Maple construction.
161
& Machines
No.
Cabinet Locks
& Latches
Sold 2/card.
Lighting
Wood
Products
CARVED CORBELS
Corbels
Unit# 3893092
Unit# 3893049
Unit# 3893080
CARVED CORBELS
CARVED CORBELS
CARVED CORBELS
Fluted Acanthus
Classic
Crown Block
Dim. In.
WxHxD
No.
WHI-CRV5205LW
9 x 36-1/2 x 10
WHI-CRV5210LW
7-1/2 x 24 x 8-1/2
No.
Unit# 3893093
Dim. In.
W* x H x D
Species
CARVED CORBELS
WHI-CRV5257CH
7 x 22 x 3-1/4
Cherry
Bellflower
WHI-CRV5257LW
7 x 22 x 3-1/4
Lindenwood
WHI-CRV5257MA
7 x 22 x 3-1/4
Maple
WHI-CRV5253CH
7 x 14 x 3-1/2
Cherry
WHI-CRV5253LW
7 x 14 x 3-1/2
Lindenwood
WHI-CRV5095LW
5-1/2 x 12-1/8 x 5-1/2
Small – Accepts Crowns up to 5” Wide
WHI-CRV5253MA
7 x 14 x 3-1/2
Maple
WHI-CRV5256CH
3-1/2 x 12 x 7-1/2
Cherry
WHI-CRV5256LW
WHI-CRV5256MA
3-1/2 x 12 x 7-1/2
WHI-CRV5250CH
5 x 11 x 3
Cherry
WHI-CRV5250LW
5 x 11 x 3
Lindenwood
5
3-1/2 x 8-1/2 x 3-1/2
Unit# 3893079
Fluted
Maple
WHI-CRV5250MA
5 x 11 x 3
Maple
WHI-CRV5259CH
7 x 9 x 5-1/2
Cherry
No.
WHI-CRV5259LW
7 x 9 x 5-1/2
Lindenwood
WHI-CRV5216LW
7-1/2 x 24 x 11-1/2
WHI-CRV5259MA
7 x 9 x 5-1/2
Maple
WHI-CRV5218LW
6 x 14-1/2 x 8-1/4
WHI-CRV5220LW
WHI-CRV5099LW
CARVED CORBELS
Dim. In.
WxHxD
Dim. In.
No.
WxHxD
Large – Accepts Crowns 5-1/4” to 7-1/2” Wide
4 x 14-1/2 x 9-1/4
Unit # 4031028
Dim. In.
WxHxD
Unit# 3893047
CARVED CORBELS
No.
Classic
CORBELS
9 x 24 x 7
WHI-CRV5094LW
7 x 14 x 5-1/4
Unit# 3893095
CARVED CORBELS
Classic
Fluted
No.
Dim. In.
W* x H x D
WHI-CRV5105CH 5-1/4 x 12-1/2 x 4-1/2
Measures 1-3/4” x 8-3/8” x 10-7/8”.
No.
Species
Cherry
WHI-CRV5105LW 5-1/4 x 12-1/2 x 4-1/2 Lindenwood
Species
CORBEL-B-AL
Alder
CORBEL-B-CH
Cherry
CORBEL-B-MP
Maple
CORBEL-B-RO
Red oak
CORBEL-B-RW
Rubberwood
162
WHI-CRV5092LW
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
WHI-CRV5105MA 5-1/4 x 12-1/2 x 4-1/2
Maple
WHI-CRV5107CH 3-3/4 x 6-1/2 x 3-1/2
Cherry
WHI-CRV5107MA 3-3/4 x 6-1/2 x 3-1/2
Maple
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
No.
Dim. In.
WxHxD
WHI-CRV5236LW
9-1/4 x 16-1/2 x 6
WHI-CRV5238LW
7-3/4 x 14 x 3
WHI-CRV5240LW
5-1/2 x 10 x 2-1/2
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 4031023
Unit # 4031020
CORBELS
Surfacing
Products
Sinks
Corbels
CORBELS
Mission
Unit# 3893096
CORBELS
Edgebanding
& Veneers
Grape
Species
8-3/4 x 18 x 8-1/4
Cherry
No.
CORBEL-G-1-AL
Alder
CORBEL-G-1-CH
Cherry
WHI-CRV5101CH
CORBEL-G-1-MP
Maple
WHI-CHV5101MA
8-3/4 x 18 x 8-1/4
Maple
CORBEL-G-1-RO
Red oak
WHI-CRV5102CH
5-3/4 x 14 x 5
Cherry
Species
Small – 10” H x 5” W x 4-1/2” D
CORB-M-5-AL
Alder
CORB-M-5-CH
Cherry
CORB-M-5-MP
Maple
Red oak
CORBEL-G-1-RW
Rubberwood
Medium – 14” H x 7” W x 5” D
WHI-CHV5102MA
5-3/4 x 14 x 5
Maple
CORB-M-5-RO
WHI-CRV5103CH
5 x 12 x 4
Cherry
CORBEL-G-2-AL
Alder
WHI-CHV5103MA
5 x 12 x 4
Maple
CORB-M-5-RW
Rubberwood
Medium – 14” H x 7” W x 5” D
CORBEL-G-2-CH
Cherry
WHI-CRV5104CH
3-1/2 x 12 x 7-1/2
Cherry
CORB-M-6-AL
Alder
CORBEL-G-2-MP
Maple
WHI-CHV5104MA
3-1/2 x 12 x 7-1/2
Maple
CORB-M-6-CH
Cherry
CORBEL-G-2-RO
Red oak
WHI-CRV5108CH
3-1/2 x 6-1/2 x 3-3/4
Cherry
CORB-M-6-MP
Maple
WHI-CHV5104MA
3-1/2 x 6-1/2 x 3-3/4
Maple
CORB-M-6-RO
Red oak
CORBEL-G-2-RW
Rubberwood
Narrow – 12” H x 9” W x 3” D
CORB-G-5-AL
Alder
CORB-G-5-CH
Cherry
CARVED CORBELS
CORB-G-5-MP
Maple
Lion’s Head
CORB-G-5-RO
Red oak
CORB-G-5-RW
Rubberwood
CORB-M-6-RW
Rubberwood
Narrow – 12” H x 6-1/2” W x 2-1/2” D
Unit# 3893078
CORB-M-4-AL
Alder
CORB-M-4-CH
Cherry
CORB-M-4-MP
Maple
CORB-M-4-RO
Red oak
CORB-M-4-RW
Rubberwood
Wood
Products
Unit# 3893023
No.
Dim. In.
W* x H x D
Narrow
Shelving
& Hardware
Small/Medium
No.
Species
Small – 10” H x 5-1/4” W x 4-1/2” D
Screws &
Fasteners
Narrow
Storage &
Convenience
Small/Medium
Decorative
Hardware
Adhesives
& Caulk
Mission
Dim. In.
WxHxD
Species
WHI-CRV5091LW
8 x 26 x 6-1/2
Lindenwood
Cabinet Locks
& Latches
No.
Lighting
CORBELS
Imbricated
Species
WHI-CRV5610CH
1 x 5-1/2 x 1
Cherry
WHI-CRV5610MA
1 x 5-1/2 x 1
Maple
WHI-CRV5612CH
1x4x1
Cherry
WHI-CRV5612MA
1x4x1
Maple
163
& Machines
Dim. In.
WxHxD
No.
Abrasives
needs!
Corbels
Dim. In.
W* x H x D
Species
WHI-CRV5604CH
3 x 5-1/2 x 1-3/4
Cherry
WHI-CRV5604MA
3 x 5-1/2 x 1-3/4
Maple
WHI-CRV5606CH
2 x 3-3/4 x 1-1/4
Cherry
CORBELS
Bar Bracket – Traditional
No.
Unit# 3893048
CARVED CORBELS
Petite
WHI-CRV5606MA
2 x 3-3/4 x 1-1/4
Maple
WHI-CRV5608CH
1-1/2 x 2-3/4 x 7/8
Cherry
WHI-CRV5608MA
1-1/2 x 2-3/4 x 7/8
Maple
Unit # 4031021
Unit# 3893083
CARVED CORBELS
Petite Acanthus
Petite Classic
Measures 3” W x 4-1/4” H x 1-3/4” D.
No.
Petite Acanthus
Species
WHI-CRV5125CH
Cherry
WHI-CRV5125LW
Lindenwood
WHI-CRV5125MA
Measures 13” H x 7-3/4” W x 3-3/8” D.
No.
Shell Keystone
Species
CORB-T-4-AL
Alder
CORB-T-4-CH
Cherry
CORB-T-4-MP
Maple
CORB-T-4-RO
Red oak
CORB-T-4-RW
Rubberwood
Maple
Petite Classic
WHI-CRV5126CH
Cherry
WHI-CRV5126LW
Lindenwood
WHI-CRV5126MA
Maple
Unit# 3893046
CORBELS
Lindenwood construction. Accepts casings up to 6-1/2”
x 1-7/8”.
Dim. In.
No.
WxHxD
Scrolled
WHI-CRV5127LW
Unit# 3893097
8 x 9-1/2 x 2-1/2
Unit # 4031024
CARVED CORBELS
Vineyard
CORBELS
Traditional
Dim. In.
W* x H x D
No.
Species
Acanthus Grapevine
Grapevine
WHI-CRV5113LW
8-3/4 x 26-1/2 x
8-1/4
Lindenwood
WHI-CRV5113MA
8-3/4 x 26-1/2 x
8-1/4
Maple
WHI-CRV5114CH
5-3/4 x 14 x 5
Cherry
WHI-CRV5100CH
3-1/2 x 13 x 8
Cherry
WHI-CRV5114LW
5-3/4 x 14 x 5
Lindenwood
WHI-CRV5100LW
3-1/2 x 13 x 8
Lindenwood
WHI-CRV5114MA
5-3/4 x 14 x 5
Maple
WHI-CRV5100MA
WHI-CRV5115CH
5 x 12 x 4
Cherry
CORBEL-T-1-AL
Alder
3-1/2 x 13 x 8
Grapevine
WHI-CRV5115LW
5 x 12 x 4
Lindenwood
CORBEL-T-1-CH
Cherry
WHI-CRV5110CH
5-1/2 x 15 x 7
Cherry
WHI-CRV5115MA
5 x 12 x 4
Maple
CORBEL-T-1-MP
Maple
WHI-CRV5110LW
5-1/2 x 15 x 7
Lindenwood
WHI-CRV5116CH
3-1/2 x 12 x 7-1/2
Cherry
CORBEL-T-1-RO
Red oak
WHI-CRV5116LW
WHI-CRV5116MA
3-1/2 x 12 x 7-1/2
No.
No.
Species
Small – 10” H x 5-1/4” W x 4-1/2” D
Maple
CORBEL-T-1-RW
Rubberwood
Medium – 14” H x 7” W x 5” D
WHI-CRV5117CH
3-1/2 x 6-1/2 x
3-3/4
Cherry
CORBEL-T-2-AL
WHI-CRV5117LW
3-1/2 x 6-1/2 x
3-3/4
Lindenwood
WHI-CRV5117MA
164
3-1/2 x 6-1/2 x
3-3/4
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
CORBEL-T-2-CH
Maple
Alder
Cherry
CORBEL-T-2-MP
Maple
CORBEL-T-2-RO
Red oak
CORBEL-T-2-RW
Rubberwood
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Dim. In.
W* x H x D
Acanthus Grapevine
Species
Maple
WHI-CRV5110MA
5-1/2 x 15 x 7
Maple
WHI-CRV5112CH
4-3/4 x 10 x 5-1/4
Cherry
WHI-CRV5112LW
WHI-CRV5112MA
4-3/4 x 10 x 5-1/4
Maple
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
DENTRO-.75
Unit # 3447011
Hickory
25
M0040MUF2
Maple
25
M0040OUF2
Red oak
25
Alder
1-1/2” W x 11/16” H
25
M0044CUF2
Cherry
M0044HUF2
Hickory
25
25
M0044MUF2
Maple
25
M0044OUF2
Red oak
25
M0044QUF2
Alder
25
Red oak
1” Block Size
DENTCH-1.0
Cherry
DENTMA-1.0
Maple
DENTRO-1.0
Unit# 3893008A
Red oak
Unit # 3447012
ROPE MOULDINGS
DENTIL MOULDINGS
Shelving
& Hardware
ROPE MOULDINGS
Measures 96” L.
No.
No.
Wood
Species
3/4” W x 1/2” H x 48” L
Pkg.
Qty.
M0062OUF2
Red oak
15
M0062MUF2
Maple
15
M0062CUF2
M0062HUF2
Cherry
Hickory
3/4” W x 1/2” H x 96” L
15
15
Wood
Species
3/8” W x 3/16” H
Pkg.
Qty.
96” Length.
Dim. In.
WxD
Species
WHI-PM490CH
1-1/4 x 5/8
Cherry
4
WHI-PM490MA
1-1/4 x 5/8
Maple
25
WHI-PM490RO
1-1/4 x 5/8
Red oak
Maple
4
WHI-PM492CH
3/4 x 3/8
Cherry
Maple
25
WHI-PM492MA
3/4 x 3/8
Maple
M0050OUF8
Red oak
4
WHI-PM492RO
3/4 x 3/8
Red oak
Cherry
M0050CUF8
Cherry
4
M0050CUF2
Cherry
25
M0050HUF8
Hickory
M0050HUF2
Hickory
M0050MUF8
M0050MUF2
No.
M0050OUF2
Red oak
25
WHI-PM494CH
1/2 x 1/4
M0061OUF8
Red oak
4
M0050QUF8
Alder
4
WHI-PM494MA
1/2 x 1/4
Maple
M0061OUF2
Red oak
15
M0050QUF2
25
WHI-PM494RO
1/2 x 1/4
Red oak
M0061MUF8
Maple
4
WHI-PM495CH
3/8 x 3/16
Cherry
M0061MUF2
Maple
15
M0051CUF8
Cherry
4
WHI-PM495MA
3/8 x 3/16
Maple
M0061CUF8
Cherry
4
M0051CUF2
Cherry
25
WHI-PM495RO
3/8 x 3/16
Red oak
M0061CUF2
Cherry
15
M0051HUF8
Hickory
4
Hickory
25
Alder
1/2” W x 7/32” H
M0061HUF8
Hickory
4
M0051HUF2
M0061HUF2
Hickory
15
M0051MUF8
Maple
4
M0061QUF8
Alder
4
M0051MUF2
Maple
25
HALF-ROUND LINEALS
15
M0051OUF8
Red oak
4
Rope
M0051OUF2
Red oak
25
Alder
4
M0061QUF2
Alder
5/8” W x 1/4” H x 96” L
Unit# 3893008
96” Length.
M8398OUF8
Red oak
4
M0051QUF8
M8398OUF2
Red oak
25
M0051QUF2
M8398MUF8
Maple
4
WHI-MLD5800CH
2x1
Cherry
M8398MUF2
Maple
25
M0052CUF8
Cherry
4
WHI-MLD5800MA
2x1
Maple
M8398CUF8
Cherry
4
M0052CUF2
Cherry
25
WHI-MLD5802CH 1-1/2 x 3/4 Cherry
M8398CUF2
Cherry
25
M0052HUF8
Hickory
4
WHI-MLD5802MA 1-1/2 x 3/4 Maple
M8398HUF8
Hickory
4
M0052HUF2
Hickory
25
WHI-MLD5804CH
1 x 1/2
Cherry
M8398HUF2
Hickory
25
M0052MUF8
Maple
4
WHI-MLD5804MA
1 x 1/2
Maple
M8398QUF8
Alder
4
M0052MUF2
Maple
25
M8398QUF2
Alder
25
Alder
3/4” W x 5/16” H
Decorative
Hardware
M0040QUF2
25
Edgebanding
& Veneers
Cherry
M0040HUF2
Adhesives
& Caulk
M0040CUF2
Maple
25
25
No.
Dim. In.
W x D Species
165
Screws &
Fasteners
Cherry
DENTMA-.75
4
Alder
1” W x 7/16” H
Storage &
Convenience
DENTCH-.75
1-3/4 x 2-3/4 x 1-1/2
Alder
Wood
Products
WHI-CRV5123LW
Mouldings
M0052QUF8
Lighting
Dim. In.
WxHxD
No.
25
Cabinet Locks
& Latches
For use on flat or
curved
surfaces
on furniture, cabinetry or crown
moulding.
Constructed with wood
veneer bonded to
fiberboard
core
with flexible backing. Measures 47”
L x 3/16” thick.
Wood
Species
3/4” Block Size
Lindenwood construction. Sold 4/card.
4
Red oak
Abrasives
Dentil Moulding – Flexible
No.
Red oak
M0052OUF2
M0052QUF2
Unit# 3893082
MODILLION BLOCKS
M0052OUF8
& Machines
Unit # 3447039
TRIM STRIPS
Pkg.
Qty.
Sinks
Wood
Species
No.
Surfacing
Products
Mouldings
Mouldings
No.
Dim. In.
HxD
Woven
Pattern
Repeat In. Species
WHI-MLD5949CH 1-1/2 x 11/16
Unit# 3893056
PANEL MOULDINGS
Laurel w/ Rosette
Acanthus
Running Leaf
Acanthus Wave
Reeded
1-3/4
Cherry
WHI-MLD5949MA 1-1/2 x 11/16
1-3/4
Classic Buttons
Maple
WHI-MLD5956CH 1-1/2 x 9/16
1
Cherry
WHI-MLD5956MA 1-1/2 x 9/16
Palmette
1
Maple
WHI-MLD5958CH 1-1/2 x 9/16
3/4
Cherry
WHI-MLD5958MA 1-1/2 x 9/16
3/4
Running Weave
Maple
WHI-MLD5960CH 1-1/2 x 9/16
3/4
Cherry
WHI-MLD5960MA 1-1/2 x 9/16
3/4
Twisting Ribbon
Maple
WHI-MLD5964CH
Cherry
1-1/4 x 3/4
1-1/8
WHI-MLD5964MA 1-1/4 x 3/4
1-1/8
Egg & Dart – 1/4” to 1/2” Lipping
Maple
WHI-MLD5968CH
Cherry
1-1/2 x 3/4
–
WHI-MLD5968MA 1-1/2 x 3/4
–
Traditional – 1/4” to 3/4” Lipping
Woven
WHI-MLD5975CH
Classic Buttons
Palmette
Running Weave
Twisting Ribbon
Egg & Dart w/ Lips
Traditional w/ Lips
Maple
2-1/4 x 3/4
–
Cherry
WHI-MLD5975MA 2-1/4 x 3/4
Dentil
–
Maple
WHI-MLD5982CH 2-3/1 x 11/16
1
Cherry
WHI-MLD5982MA 2-3/1 x 11/16
Egg & Dart
1
Maple
Cherry
Radius
Lineal
Radius. Sold 4/card.
Lineal. Fits CRV 5616 Series.
No.
Species
Radius – 3/4” W x 3-3/4” H x 3/8” D
WHI-CRV5616CH
Cherry
WHI-CRV5616MA
Maple
Lineal – 3/4” W x 96” L x 1/2” D
WHI-MLD5616CH
Cherry
WHI-MLD5616MA
Maple
Unit# 3893059
WHI-MLD5976CH
3/4 x 5/8
1-7/8
WHI-MLD5976MA
3/4 x 5/8
1-7/8
Maple
WHI-MLD5979CH
1 x 3/4
1-5/8
Cherry
WHI-MLD5979MA
1 x 3/4
1-5/8
Maple
2-3/8
Cherry
WHI-MLD5978MA 1-1/4 x 13/16
2-3/8
Lamb’s Tongue
Maple
WHI-MLD5980CH 1-1/4 x 11/16
1-1/2
Cherry
WHI-MLD5980MA 1-1/4 x 11/16
1-1/2
Bellflower & Bead
Maple
WHI-MLD5986CH
3/4 x 1/2
1-7/8
WHI-MLD5986MA
3/4 x 1/2
1-7/8
WHI-MLD5978CH 1-1/4 x 13/16
Unit# 3893025
PANEL MOULDINGS
MOULDINGS
For creating symmetrical profiles with lineals or panel
mouldings. Measures 96” L.
Dim. In.
HxD
Species
WHI-MLD6026CH
3/4 x 11/16
Cherry
WHI-MLD6026MA
3/4 x 11/16
Maple
Cherry
WHI-MLD6028CH
1/2 x 11/16
Cherry
Maple
WHI-MLD6028MA
1/2 x 11/16
Maple
WHI-MLD6030CH
5/16 x 7/16
Cherry
WHI-MLD6030MA
5/16 x 7/16
Maple
Dentil
No.
Unit# 3893057
PANEL MOULDINGS
Egg & Dart
Insert
Unit# 3893050
CROWN MOULDINGS
Egg & Dart
Lamb’s Tongue
Acanthus
Lamb’s Tongue
Bellflower & Bead
Measures 96” L.
No.
Dentil
Dim. In.
Pattern
HxD
Repeat In. Species
Laurel w/ Rosette
WHI-MLD5928CH
3 x 13/16
7
Cherry
WHI-MLD5928MA
3 x 13/16
Acanthus
7
Maple
1-5/8
Cherry
WHI-MLD5940MA 1-1/2 x 5/8
Running Leaf
1-5/8
Maple
WHI-MLD5942CH 1-1/2 x 11/16
1-5/8
Cherry
WHI-MLD5942MA 1-1/2 x 11/16
1-5/8
Acanthus Wave
Maple
WHI-MLD5944CH 1-1/2 x 11/16
1-3/8
Cherry
WHI-MLD5944MA 1-1/2 x 11/16
1-3/8
Maple
WHI-MLD5940CH
166
1-1/2 x 5/8
Fits MLD5864 and MLD5866 Series crown mouldings,
and MLD5975 Series panel mouldings. Measures 1/2”
H x 3/8” D x 96” L.
No.
Species
Egg & Dart
Measures 96” L x 13/16” D.
WHI-MLD6000CH
Cherry
WHI-MLD5840CH
WHI-MLD6000MA
Maple
WHI-MLD5840MA
4-3/4
Pattern Repeats Every 2-1/2”
Maple
Cherry
WHI-MLD5842CH
Cherry
Maple
WHI-MLD5842MA
3-1/2
Maple
Cherry
WHI-MLD5844CH
2-1/2
Cherry
Maple
WHI-MLD5844MA
2-1/2
Maple
Lamb’s Tongue
WHI-MLD6002CH
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
WHI-MLD6002MA
Dentil
WHI-MLD6005CH
WHI-MLD6005MA
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Ht.
No.
In.
Species
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
4-3/4
3-1/2
Cherry
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit# 3893051
Unit# 3893055
17-3/4
Cherry
3-1/2
17-3/4
Cornucopias
Maple
CROWN MOULDINGS
FRIEZES
WHI-MLD5918CH
3-1/2
8
Cherry
Egg & Dart
Ornate
WHI-MLD5918MA
3-1/2
Palmette
8
Maple
WHI-MLD5920CH
3-1/2
1-3/4
Cherry
WHI-MLD5920MA
3-1/2
1-3/4
Woven
Maple
WHI-MLD5924CH
3-1/4
2
Cherry
3-1/4
2
Sunflowers
Maple
Running Palmette
Ht.
No.
In.
Species
3
Sicilian
Cherry
WHI-MLD5846MA
3
Maple
WHI-MLD58428CH
4-3/4
Cherry
WHI-MLD5848MA
4-3/4
Maple
WHI-MLD5926CH
3
3-3/8
Cherry
WHI-MLD5926MA
3
3-3/8
Maple
Tuscan Country
Acanthus Scrolls
Mouldings & Posts
Unit# 3893052
CROWN MOULDINGS
Fluted
Unit# 3893058
Vineyard
Cherry
WHI-MLD5860MA
Maple
Shelving
& Hardware
Cornucopias
Measures 96” L x 3-1/2” H x 13/16” D. Pattern repeats
every 2”.
No.
Species
WHI-MLD5860CH
PARTING STRIPS
Ht.
In.
Species
WHI-MLD6020CH
3-1/4
Cherry
WHI-MLD6020MA
3-1/4
Maple
WHI-MLD6022CH
1-5/8
Cherry
No.
Palmette
Screws &
Fasteners
WHI-MLD5846CH
WHI-MLD5924MA
Sinks
3-1/2
Edgebanding
& Veneers
WHI-MLD5916MA
Adhesives
& Caulk
WHI-MLD5916CH
Species
Decorative
Hardware
Ht.
Pattern
In.
Repeat In.
Vineyard
No.
Surfacing
Products
Mouldings & Posts
Traditional
Cherry
WHI-MLD5869MA
Maple
WHI-MLD5903CH
5-1/4
9-3/4
WHI-MLD5903MA
5-1/4
9-3/4
Maple
WHI-MLD5922CH
3-1/2
6
Cherry
Traditional Cove
WHI-MLD5900CH
Maple
Species
6
Maple
5-1/4
15-1/2
Cherry
WHI-MLD5900MA
5-1/4
15-1/2
Maple
WHI-MLD5910CH
3-1/2
6-1/4
Cherry
Lighting
Cherry
POSTS
Acanthus
Measures 36” H x 5” W x 5” D.
WHI-MLD5910MA
3-1/2
6-1/4
Tuscan Country
Maple
Measures 96” L x 13/16” D. Accepts insert panel
mouldings.
Ht.
No.
In.
Species
WHI-MLD5902CH
5-1/4
WHI-MLD5902MA
5-1/4
WHI-MLD5864CH
3-1/2
Cherry
WHI-MLD5912CH
3-1/2
WHI-MLD5864MA
3-1/2
Maple
WHI-MLD5866CH
2-1/2
Cherry
WHI-MLD5866MA
2-1/2
Maple
No.
Species
POST-F-536-AL
Alder
Cherry
POST-F-536-CH
Cherry
21
Maple
POST-F-536-MP
Maple
13-1/4
Cherry
POST-F-536-RO
Red oak
WHI-MLD5912MA
3-1/2
13-1/4
Acanthus Scrolls
Maple
POST-F-536-RW
Rubberwood
WHI-MLD5914CH
3-1/2
10
Cherry
WHI-MLD5914MA
3-1/2
10
Maple
21
Cabinet Locks
& Latches
3-1/2
Sicilian
13/16
Abrasives
WHI-MLD5922MA
Cherry
Wood
Products
WHI-MLD5869CH
Unit# 3893053
Maple
13/16
Unit # 4031037
Ht.
Pattern
No.
In.
Repeat In.
Running Palmette
CROWN MOULDINGS
1-5/8
WHI-MLD6024CH
WHI-MLD6024MA
Sunflowers
Measures 96” L x 2-1/2” H x 11/16” D. Accepts insert
panel mouldings.
No.
Species
WHI-MLD6022MA
167
& Machines
CROWN MOULDINGS
Woven
Storage &
Convenience
Unit# 3893054
Posts
No.
Species
Full – 35-1/4” H x 3-1/2” W x 3-1/2” D
Unit # 4031035
No.
Species
Full – 36” H x 3-1/2” W x 3-1/2” D
POST-M-AL
Alder
POST-C-536-AL
Alder
POST-M-CH
Cherry
POST-C-536-CH
Cherry
POSTS
POST-M-MP
Maple
POST-C-536-MP
Maple
Fluted
POST-M-RO
Red oak
POST-C-536-RO
Red oak
POST-M-RW
Rubberwood
Full – 42” H x 3-1/2” W x 3-1/2” D
POST-C-536-RW
Rubberwood
Full – 42” H x 3-1/2” W x 3-1/2” D
POST-M-42-AL
Alder
POST-C-542-AL
Alder
POST-M-42-CH
Cherry
POST-C-542-CH
Cherry
POST-M-42-MP
Maple
POST-C-542-MP
Maple
POST-M-42-RO
Red oak
POST-C-542-RO
Red oak
POST-M-42-RW
Rubberwood
Full – 36” H x 5” W x 5” D
Full
Half
No.
Species
Half – 35-1/4” H x 3-1/2” W x 1-3/4” D
POST-M-536-AL
Alder
POST-M-536-CH
Cherry
POST-M-536-MP
Maple
POST-M-536-RO
Red oak
POST-M-542-AL
Alder
Alder
POST-M-542-CH
Cherry
POST-D-H-CH
Cherry
POST-M-542-MP
Maple
POST-D-H-MP
Maple
POST-M-542-RO
Red oak
POST-D-H-RO
Red oak
POST-M-542-RW
Posts
POST-D-AL
Alder
POST-D-CH
Cherry
POST-D-MP
Maple
POST-D-RO
Red oak
Rubberwood
Unit # 4031033
POSTS
Reed
POST-M-536-RW
Rubberwood
Full – 42” H x 5” W x 5” D
POST-D-H-AL
POST-D-H-RW
Rubberwood
Full – 35-1/4” H x 3-1/2” W x 3-1/2” D
POST-C-542-RW
Rubberwood
Unit # 4031034
POSTS
Rope
Half
Full
No.
Species
Half – 35-1/4” H x 3-1/2” W x 1-3/4” D
POST-D-RW
Rubberwood
Full – 42” H x 3-1/2” W x 3-1/2” D
POST-B-H-AL
Alder
POST-D-42-AL
Alder
POST-B-H-CH
Cherry
POST-D-42-CH
Cherry
POST-B-H-MP
Maple
POST-D-42-MP
Maple
POST-B-H-RO
Red oak
POST-D-42-RO
Red oak
POST-D-42-RW
Rubberwood
POST-B-H-RW
Rubberwood
Full – 35-1/4” H x 3-1/2” W x 3-1/2” D
Unit # 4031039
POSTS
Half
Mission
Full
No.
Species
Half – 35-1/4” H x 3-1/2” W x 1-3/4” D
POST-C-H-AL
Alder
POST-C-H-CH
Cherry
POST-C-H-MP
Maple
POST-C-H-RO
Red oak
Half
Full
No.
Species
Half – 35-1/4” H x 3-1/2” W x 1-3/4” D
POST-M-H-AL
Alder
POST-M-H-CH
Cherry
POST-M-H-MP
Maple
POST-M-H-RO
Red oak
POST-M-H-RW
Rubberwood
168
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Alder
POST-C-CH
Cherry
POST-C-MP
Maple
POST-C-RO
Red oak
POST-C-RW
Rubberwood
Full – 3-1/2” x 3-1/2” x 42”
POST-C-42-AL
Alder
POST-C-42-CH
Cherry
POST-C-42-MP
Maple
POST-C-42-RO
Red oak
POST-C-42-RW
Rubberwood
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Alder
Cherry
POST-B-MP
Maple
POST-B-RO
Red oak
POST-B-RW
Rubberwood
Full – 42” H x 3-1/2” W x 3-1/2” D
POST-C-H-RW
Rubberwood
Full – 35-1/4” H x 3-1/2” W x 3-1/2” D
POST-C-AL
POST-B-AL
POST-B-CH
POST-B-42-AL
Alder
POST-B-42-CH
Cherry
POST-B-42-MP
Maple
POST-B-42-RO
Red oak
POST-B-42-RW
Rubberwood
Full – 36” H x 5” W x 5” D
POST-B-536-AL
Alder
POST-B-536-CH
Cherry
POST-B-536-MP
Maple
POST-B-536-RO
Red oak
POST-B-536-RW
Rubberwood
Full – 42” H x 5” W x 5” D
POST-B-542-AL
Alder
POST-B-542-CH
Cherry
POST-B-542-MP
Maple
POST-B-542-RO
Red oak
POST-B-542-RW
Rubberwood
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
No.
Species
Sinks
Red oak
POST-A-H-RW
Rubberwood
Full – x 35-1/4” H x 3-1/2” W x 3-1/2” D
Alder
POST-A-CH
Cherry
POST-A-MP
Maple
POST-A-RO
Red oak
Unit# 3893065
Edgebanding
& Veneers
POST-A-AL
Turned
CORNER POSTS
Filigree
Alder
POST-A-42-CH
Cherry
POST-A-42-MP
Maple
POST-A-42-RO
Red oak
Decorative
Hardware
POST-A-42-AL
Adhesives
& Caulk
POST-A-RW
Rubberwood
Full – 42” H 3-1/2” W x 3-1/2” D
POST-A-42-RW
Rubberwood
Full – 36” H x 5” W x 5” D
Full
No.
Species
Half – 35-1/4” H x 3-1/2” W x 1-3/4” D
POST-E-H-AL
POST-A-536-AL
Alder
POST-A-536-CH
Cherry
POST-A-536-MP
Maple
POST-A-536-RO
Red oak
POST-A-536-RW
Rubberwood
Full – 42” H x 5” W x 5” D
Alder
POST-E-H-CH
Cherry
POST-A-542-AL
POST-E-H-MP
Maple
POST-A-542-CH
POST-E-H-RO
Red oak
POST-A-542-MP
POST-E-H-RW
Rubberwood
Full – 35-1/4” H x 3-1/2” W x 3-1/2” D
Alder
POST-E-CH
Cherry
POST-E-MP
Maple
POST-E-RO
Red oak
Alder
POST-E-42-CH
Cherry
POST-E-42-MP
Maple
POST-E-42-RO
Red oak
POST-E-42-RW
Cherry
Maple
POST-A-542-RO
Red oak
POST-A-542-RW
Rubberwood
Unit # 4031038
Ht.
In.
Species
WHI-CP6240CH
42
Cherry
WHI-CP6240MA
42
Maple
WHI-CP6242CH
36
Cherry
WHI-CP6242MA
36
Maple
WHI-CP6244CH
30
Cherry
WHI-CP6244MA
30
Maple
No.
Ht.
In.
Species
WHI-CP6246CH
42
Cherry
Unit# 3893066
POST-E-RW
Rubberwood
Full – 42” H x 3-1/2” W x 3-1/2” D
POST-E-42-AL
No.
Alder
CORNER POSTS
Traditional
POSTS
Tuscan
Storage &
Convenience
POST-E-AL
Measures 2-3/4” square.
Screws &
Fasteners
Half
POSTS
Shelving
& Hardware
POST-A-H-RO
Unit # 4031036
Surfacing
Products
Posts
Rubberwood
Wood
Products
Unit # 4031032
POSTS
Species
36” Height
Half
POST-G-536-AL
Alder
WHI-CP6246MA
42
Maple
POST-G-536-CH
Cherry
WHI-CP6248CH
36
Cherry
POST-G-536-MP
Maple
WHI-CP6248MA
36
Maple
POST-G-536-RO
Red oak
WHI-CP6250CH
30
Cherry
Rubberwood
WHI-CP6250MA
30
Maple
POST-G-536-RW
Full
42” Height
No.
Species
Half – x 35-1/4” H x 3-1/2” W x 1-3/4” D
POST-G-542-AL
Alder
POST-G-542-CH
Cherry
POST-G-542-MP
Maple
POST-A-H-AL
Alder
POST-G-542-RO
Red oak
POST-A-H-CH
Cherry
POST-G-542-RW
Rubberwood
POST-A-H-MP
Maple
We appreciate
your business!
169
Abrasives
No.
& Machines
Measures 2-3/4” square.
Measures 5” W x 5” D.
Cabinet Locks
& Latches
Lighting
Turned
Capitals & Lineals
Unit# 3893012
Unit# 3893003
CARVED CAPITALS
TURNED CAPITALS
Corinthian
Traditional
Unit# 3893017
CAPITALS
Traditional
No.
WHI-CRV5129LW
Dim. In.
WxHxD
Species
WHI-CRV5580CH
5-1/4 x 6-3/4 x 1-1/4
Cherry
WHI-CRV5580MA
5-1/4 x 6-3/4 x 1-1/4
Maple
WHI-CRV5582CH
4 x 5-1/4 x 1-1/8
Cherry
WHI-CRV5582MA
4 x 5-1/4 x 1-1/8
Maple
No.
Dim. In.
W* x H x D
Sold 2/pkg.
Species
14-1/4 X 12 X 2-3/4 Lindenwood
Dim. In.
W* x H x D
Species
WHI-CRV5130CH
8 x 8 x 1-3/4
Cherry
WHI-CRV5512MA
3-1/2 x 4-3/4 x 1-3/4
Maple
WHI-CRV5130LW
8 x 8 x 1-3/4
Lindenwood
WHI-CRV5512CH
3-1/2 x 4-3/4 x 1-3/4
Cherry
WHI-CRV5130MA
8 x 8 x 1-3/4
Maple
WHI-CRV5514MA
2-5/8 x 3-5/8 x 1-3/8
Maple
2-5/8 x 3-5/8 x 1-3/8
Cherry
WHI-CRV5133CH
6 x 6 x 1-3/8
Cherry
WHI-CRV5514CH
WHI-CRV5133LW
6 x 6 x 1-3/8
Lindenwood
WHI-CRV5516MA
1-3/4 x 2-3/8 x 7/8
Maple
WHI-CRV5133MA
6 x 6 x 1-3/8
Maple
WHI-CRV5516CH
1-3/4 x 2-3/8 x 7/8
Cherry
WHI-CRV5136CH
3-1/4 x 3-1/4 x 1-1/4
Cherry
WHI-CRV5136LW
3-1/4 x 3-1/4 x 1-1/4 Lindenwood
HALF-ROUND LINEALS
WHI-CRV5136MA
3-1/4 x 3-1/4 x 1-1/4
Traditional
Unit# 3893011
Unit# 3893084
CAPITALS
No.
Maple
Ionic
Capitals & Lineals
Unit# 3893002
CARVED CAPITALS
Papyrus Leaves
Large
Petite, Small & Medium
96” Length.
No.
Desc.
Dim. In.
W* x H x D
WHI-CRV5146LW
Petite
3-1/2 x 2 x 1-3/16
WHI-CRV5143LW
Small
7 x 3 x 1-1/8
WHI-CRV5140LW
Medium
8 x 3-1/2 x 1-11/16
WHI-CRV5139LW
Large
13 x 9 x 2-3/4
Unit# 3893001
CARVED CAPITALS
Acanthus
Sold 2/pkg.
No.
Dim. In.
WxD
Species
WHI-MLD5820CH
2x1
Cherry
WHI-MLD5820MA
2x1
Maple
WHI-MLD5822CH
1-1/2 x 3/4
Cherry
WHI-MLD5822MA
1-1/2 x 3/4
Maple
WHI-MLD5824CH
1 x 1/2
Cherry
1 x 1/2
Maple
No.
Dim. In.
W* x H x D
WHI-CRV5506MA
3-1/2 x 4-3/4 x 1-3/4
Maple
WHI-CRV5506CH
3-1/2 x 4-3/4 x 1-3/4
Cherry
WHI-CRV5508MA
2-5/8 x 3-5/8 x 1-3/8
Maple
HALF-ROUND LINEALS
WHI-CRV5508CH
2-5/8 x 3-5/8 x 1-3/8
Cherry
Reeded
WHI-CRV5510MA
1-3/4 x 2-3/8 x 7/8
Maple
WHI-CRV5510CH
1-3/4 x 2-3/8 x 7/8
Cherry
Species
WHI-MLD5824MA
Unit# 3893010
Sold 2/pkg.
No.
Dim. In.
W* x H x D
Species
WHI-CRV5500MA
4-5/8 x 4-3/4 x 2-3/8
Maple
WHI-CRV5500CH
4-5/8 x 4-3/4 x 2-3/8
Cherry
WHI-CRV5502MA
3-1/2 x 3-5/8 x 1-3/4
Maple
WHI-CRV5502CH
3-1/2 x 3-5/8 x 1-3/4
Cherry
WHI-CRV5504MA
2-3/8 x 2-3/8 x 1-1/8
Maple
WHI-CRV5504CH
2-3/8 x 2-3/8 x 1-1/8
Cherry
other detailed
upon request.
170
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
96” Length.
No.
Dim. In.
WxD
Species
WHI-MLD5810CH
2x1
Cherry
WHI-MLD5810MA
2x1
Maple
WHI-MLD5812CH
1-1/2 x 3/4
Cherry
WHI-MLD5812MA
1-1/2 x 3/4
Maple
WHI-MLD5814CH
1 x 1/2
Cherry
WHI-MLD5814MA
1 x 1/2
Maple
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
Finials, Plynths & Fillers
Unit# 3893006
Turned – Traditional
Traditional
Unit# 3893004
END BLOCKS
Adhesives
& Caulk
PLYNTHS
Edgebanding
& Veneers
Unit# 3893009
SPLIT FINIALS
Cherry
WHI-CRV5544MA
1-3/4 x 3-1/8 x 7/8
Maple
WHI-CRV5544CH
1-3/4 x 3-1/8 x 7/8
Cherry
WHI-CRV5546MA
1-1/4 x 2-1/8 x 5/8
Maple
WHI-CRV5546CH
1-1/4 x 2-1/8 x 5/8
Finials, Plynths & Fillers
Cherry
WHI-CRV5532MA
1-3/4 x 2-3/4 x 1-3/8
Maple
No.
Dim. In.
WxHxD
Cherry
WHI-CRV5518MA
3-1/2 x 5-3/4 x 1-3/4
Maple
3-1/2 x 5-3/4 x 1-3/4
Cherry
WHI-CRV5532CH
1-3/4 x 2-3/4 x 1-3/8
Sold 2/pkg.
Species
WHI-CRV5534MA
1-1/8 x 1-7/8 x 1
Maple
WHI-CRV5518CH
WHI-CRV5534CH
1-1/8 x 1-7/8 x 1
Cherry
WHI-CRV5520MA
2-5/8 x 5-3/4 x 1-3/8
Maple
WHI-CRV5520CH
2-5/8 x 5-3/4 x 1-3/8
Cherry
WHI-CRV5522MA
1-3/4 x 5-3/4 x 7/8
Maple
WHI-CRV5522CH
1-3/4 x 5-3/4 x 7/8
Cherry
Unit# 3893013
CARVED PLYNTHS
Unit # 3447024
Unit# 3893007
No.
Dim. In.
W* x H x D
Species
Screws &
Fasteners
SPLIT FINIALS
Carved – Acanthus
WHI-CRV5148CH 7-1/4 x 3-1/2 x 2-1/2
Cherry
WHI-CRV5148MA 7-1/4 x 3-1/2 x 2-1/2
Maple
WHI-CRV5149CH
6-1/4 x 3 x 1-7/8
Cherry
WHI-CRV5149LW
6-1/4 x 3 x 1-7/8
Lindenwood
WHI-CRV5149MA
6-1/4 x 3 x 1-7/8
WHI-CRV5150CH 2-7/8 x 1-1/2 x 1-3/8
Sold 2/pkg.
No.
Dim. In.
WxHxD
WHI-CRV5536MA
2-3/8 x 4-1/4 x 1-1/4
Maple
WHI-CRV5536CH
2-3/8 x 4-1/4 x 1-1/4
Cherry
WHI-CRV5538MA
1-3/4 x 3-1/8 x 7/8
Maple
WHI-CRV5538CH
1-3/4 x 3-1/8 x 7/8
Cherry
WHI-CRV5540MA
1-1/4 x 2-1/8 x 5/8
WHI-CRV5540CH
1-1/4 x 2-1/8 x 5/8
BEADED/FLUTED FILLERS
Unfinished
Maple
Cherry
Wood
Species
3” x 31-1/2”
M4311OUF2
Red oak
M4311MUF2
Maple
WHI-CRV5150MA 2-7/8 x 1-1/2 x 1-3/8
M4311HUF2
Hickory
M4311CUF2
3” x 48”
Cherry
Maple
Species
Unit# 3893005
SPLICERS
M4312OUF2
Red oak
M4312MUF2
Maple
M4312HUF2
Hickory
M4312CUF2
3” x 96”
Cherry
Maple
Cherry
M4318OUF2
Sold 2/pkg.
department has the
answers you need!
Reversible to show beaded or
fluted design. Pair.
No.
No.
Dim. In.
WxHxD
Species
WHI-CRV5524MA
3 x 3-1/4 x 1-1/2
Maple
WHI-CRV5524CH
3 x 3-1/4 x 1-1/2
Cherry
WHI-CRV5526MA
2-1/4 x 2-3/8 x 1-1/8
Maple
WHI-CRV5526CH
2-1/4 x 2-3/8 x 1-1/8
Cherry
WHI-CRV5528MA
1-1/2 x 1-5/8 x 3/4
Maple
WHI-CRV5528CH
1-1/2 x 1-5/8 x 3/4
Cherry
2-3/8 x 4-1/4 x 1-1/4
Cherry
Shelving
& Hardware
WHI-CRV5542CH
2-3/8 x 3-3/4 x 1-7/8
Red oak
M4318MUF2
Maple
M4318HUF2
Hickory
M4318CUF2
Cherry
M4318QUF2
6” x 96”
M3868OUF2
Storage &
Convenience
Maple
Maple
WHI-CRV5530CH
Species
Alder
Red oak
M3868MUF2
Maple
M3868HUF2
Hickory
M3868CUF2
Cherry
171
Wood
Products
2-3/8 x 4-1/4 x 1-1/4
2-3/8 x 3-3/4 x 1-7/8
Lighting
WHI-CRV5542MA
WHI-CRV5530MA
Cabinet Locks
& Latches
Species
Dim. In.
WxHxD
Abrasives
No.
Dim. In.
WxHxD
No.
& Machines
Sold 2/pkg.
Decorative
Hardware
Sold 2/pkg.
Caps & Rosettes
No.
Dim. In.
Species
WHI-CRV5169LW
3-1/2 x 5/8
Lindenwood
WHI-CRV5169MA
3-1/2 x 5/8
Oval
Maple
Unit # 4031040
Unit #3447025
ROSETTES
BEADED/FLUTED CAPS
WHI-CRV5177LW
Unfinished
Measures 3-3/4” H x 3-3/4” W x 1” D.
No.
Rosette
Plain
Beaded
Wood
Species
No.
Alder
R-8-CH
Cherry
R-8-MP
Maple
R-8-RO
Red oak
R8171OUF2
Maple
R8171CUF2
Cherry
R8171QUF2
3-1/2 x 5 x 3/4
Maple
WHI-CRV5179CH
2-3/4 x 4 x 5/8
Cherry
WHI-CRV5179LW
2-3/4 x 4 x 5/8
Lindenwood
WHI-CRV5179MA
2-3/4 x 4 x 5/8
Maple
ROSETTES
Alder
ROSETTES
3” x 3” Rosette, w/o Edge
R8185OUF2
Red oak
R8185MUF2
Maple
R8185HUF2
Hickory
R8185CUF2
Cherry
R8191OUF2
Red oak
R8191MUF2
Maple
R8191HUF2
Hickory
R8191CUF2
Cherry
Square
Rectangular
6” x 6” Plain, Cove Edge
R3871OUF2
Red oak
R3871MUF2
Maple
R3871HUF2
Hickory
R3871CUF2
Fluted
No.
R8111OUF2
Red oak
R8111MUF2
Maple
R8111HUF2
Hickory
R8111CUF2
Cherry
R8111QUF2
Alder
3” x 3” Rosette, w/o Edge
R8125OUF2
Red oak
R8125MUF2
Maple
R8125HUF2
Hickory
R8125CUF2
Cherry
3” x 12” Plain, w/o Edge
R8151OUF2
Red oak
R8151MUF2
Maple
R8151HUF2
Hickory
R8151CUF2
Cherry
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
5-1/2 x 1-3/4
Cherry
WHI-CRV5590MA
5-1/2 x 1-3/4
Maple
WHI-CRV5592CH
4-1/2 x 1-5/8
Cherry
WHI-CRV5592MA
4-1/2 x 1-5/8
Maple
WHI-CRV5594CH*
3-1/2 x 1-3/8
Cherry
WHI-CRV5594MA*
3-1/2 x 1-3/8
Maple
WHI-CRV5596CH*
2-1/2 x 7/8
Cherry
WHI-CRV5596MA*
2-1/2 x 7/8
Maple
Oval
Round
3” x 3” Rosette, Cove Edge
Species
WHI-CRV5590CH
* Sold 2/card.
Cherry
Wood
Species
Dim. In.
Dia. x D
No.
3” x 12” Plain, w/o Edge
172
WHI-CRV5178MA
Acanthus
Red oak
Hickory
Lindenwood
Unit# 3893021
Unit# 3893020
R8171HUF2
Cherry
3-1/2 x 5 x 3/4
Rubberwood
3” x 3” Rosette, Cove Edge
R8171MUF2
3-1/2 x 5 x 3/4
WHI-CRV5178LW
Species
R-8-AL
R-8-RW
Caps & Rosettes
4-1/2 x 6-1/2 x 7/8 Lindenwood
WHI-CRV5178CH
Unit# 3893086
Sold 2/card.
No.
ROSETTES
Dim. In.
Square
Species
WHI-CRV5160CH
5 x 5 x 5/8
Cherry
WHI-CRV5160LW
5 x 5 x 5/8
Lindenwood
WHI-CRV5160MA
5 x 5 x 5/8
Maple
WHI-CRV5164CH
3-1/2 x 3-1/2 x 3/8
Cherry
WHI-CRV5164LW
WHI-CRV5164MA
3-1/2 x 3-1/2 x 3/8
Rectangular
WHI-CRV5172LW
3-1/2 x 5-1/2 x 3-1/4 Lindenwood
WHI-CRV-5173LW
Round
Acanthus – Leaf
Maple
No.
Dim. In.
WxHxD
WHI-CRV5166CH
7 x 7/8
Cherry
WHI-CRV5181LW
3-7/8 x 3-7/8 x 1/2
WHI-CRV5168CH
5 x 3/4
Cherry
WHI-CRV5183LW
2-5/8 x 2-5/8 x 3/8
WHI-CRV5168LW
5 x 3/4
Lindenwood
WHI-CRV5168MA
5 x 3/4
Maple
WHI-CRV5169CH
3-1/2 x 5/8
Cherry
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit# 3893089
ROSETTES
ROSETTES
Sinks
Lion’s Head
Edgebanding
& Veneers
Unit# 3893024
ROSETTES
Star
WHI-CRV5193LW
Acanthus Rosette
Adhesives
& Caulk
Dim. In.
WxD
No.
6-1/2 x 7 x 1-1/2
WHI-CRV5194LW
Unit# 3893077
Decorative
Hardware
No.
WHI-CRV5195LW
Rosettes & Buttons
Star w/ Backing. Accepts 13/16” casings.
4 x 5/8
2-1/2 x 1/2
Star w/ Backing
ROSETTES
WHI-CRV5197LW
5-1/2 x 1-3/8; Star is 4”
Petite
WHI-CRV5198LW
3-1/2 x 1-3/8; Star is 2-1/2”
Unit# 3893019
BUTTONS
Classic
Mounting Plate
Dim. In.
Dia. x D
Species
Flower Rosettes
WHI-CRV5618CH
2-3/4 x 3/4
Pkg.
Qty.
Square
Round
Cherry
4
WHI-CRV5618MA
2-3/4 x 3/4
Maple
Acanthus Rosettes
4
Lindenwood construction. Measures 1-7/8” x 3/8”. Sold
4/card.
No.
Desc.
WHI-CRV5620CH
Cherry
4
WHI-CRV5090LW
Square
WHI-CRV5620MA
2-3/4 x 3/4
Mounting Plates
Maple
4
WHI-CRV5093LW
Round
WHI-CRV5614CH
3-3/4 x 5/8
Cherry
WHI-CRV5614MA
3-3/4 x 5/8
Maple
2-3/4 x 3/4
Shelving
& Hardware
No.
No.
Dim. In.
WxHxD
Pkg.
Species Qty.
WIL-CRV5584CH 3-1/2 x 3-1/2 x 5/8
Cherry
4
WIL-CRV5584MA 3-1/2 x 3-1/2 x 5/8
Maple
4
2
WIL-CRV5586CH 2-1/4 x 2-1/4 x 1/2
Cherry
4
2
WIL-CRV5586MA 2-1/4 x 2-1/4 x 1/2
Maple
4
ROSETTES
WIL-CRV5588CH 1-1/4 x 1-1/4 x 3/8
Cherry
8
Round
WIL-CRV5588MA 1-1/4 x 1-1/4 x 3/8
Maple
8
Unit# 3893081
Unit# 3893087
ROSETTES
Screws &
Fasteners
Dim. In.
WxHxD
Storage &
Convenience
Star w/ Backing
Star
Flower Rosette
Surfacing
Products
Rosettes & Buttons
Unit# 3893091
Fleur de Lis
Wood
Products
Unit# 3893088
CARVED CENTERS
No.
Dim. In.
WxHxD
No.
Dim. In.
Dia. x D
WHI-CRV5191LW
4-3/4 x 1-1/4 x 1/2
WHI-CRV5096LW
3 x 3/8
WHI-CRV5192LW
3-3/4 x 1 x 3/8
No.
Dim. In.
WxHxD
WHI-CRV5185LW
3-1/2 x 4-1/8 x 1/2
MANUFACTURERS’ CATALOGS
We shall be glad to send manufacturers’
catalogs and other available publications
173
& Machines
Abrasives
Cabinet Locks
& Latches
Lighting
Acanthus
Carved Centers, Corners & Drops
Unit# 3893069
Unit# 3893040
CARVED CENTERS
CARVED DROPS
Grape Cluster
Acanthus
Sold as left/right pair per card.
Dim. In.
No.
WxHxD
Measures 2” W x 8-3/4” H x 1/2” D. 2-Piece design.
Sold 2 sets/card.
Unit# 3893068
CARVED CENTERS
Flower w/ Grape Clusters
WHI-CRV5028LW
5 x 6-1/4 x 3/4
No.
Species
Lindenwood
Species
WHI-CRV5640CH
Cherry
WHI-CRV5640MA
Maple
Unit# 3893028
CARVED CENTERS
Papryus Leaves & Urn
No.
Unit# 3893041
CARVED DROPS
Dim. In.
WxHxD
Species
3-1/2 x 15-3/4
WHI-CRV5030LW
x 13/16
Carved Centers, Corners & Drops
Acanthus – Plume
Lindenwood
Measures 10-3/4” W x 5” H x 7/8” D.
No.
Species
Unit# 3893072
CARVED CENTERS
WHI-CRV5628CH
Cherry
WHI-CRV5628MA
Maple
Unit# 3893043
CARVED CORNERS
Measures 3” W x 5” H x 5/8” D. Sold 2/card.
No.
Species
Plume
Flower Basket
Laurel
WHI-CRV5642CH
Cherry
WHI-CRV5642MA
Maple
Unit# 3893074
CARVED DROPS
CRV5075 Series. Sold 2/card.
Shell
No.
Dim. In.
WxHxD
Species
WHI-CRV5073LW
12 x 12 13/16
Lindenwood
WHI-CRV5074LW
8 x 8 x 13/16
Lindenwood
WHI-CRV5075CH
4 x 4 x 5/8
Cherry
WHI-CRV5075LW
4 x 4 x 5/8
Lindenwood
WHI-CRV5075MA
4 x 4 x 5/8
Maple
Floral
Unit# 3893044
Large Urn
Small Urn
Clipped – Scroll
No.
Desc.
Dim. In.
WxHxD
WHI-CRV5053LW
Laurel
8 x 8-1/4 x 3/4
WHI-CRV5058LW Flower basket
Measures 5-1/2” W x 1” D. Lindenwood construction.
Ht.
No.
In.
10 x 10-1/2 x 1
WHI-CRV5055LW
Shell
7-1/2 x 8 x 1
WHI-CRV5060LW
Large urn
11 x 6-1/2 x 3/4
WHI-CRV5063LW
Small urn
3-1/4 x 6-1/2 x 3/4
174
CARVED CORNERS
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Includes (2) left/right pairs per card. Each piece measures 4-1/4” W x 4-1/4” H x 5/8” D.
No.
14
WHI-CRV5089LW
8
Species
WHI-CRV5079CH
Cherry
WHI-CRV5079LW
Lindenwood
WHI-CRV5079MA
Maple
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
WHI-CRV5087LW
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit# 3893026
CARVED SCROLLS
Shell & Floral
Acanthus
Unit# 3893036
Cherry
WHI-CRV5048LW
24 x 6 x 3/4
Lindenwood
WHI-CRV5048MA
24 x 6 x 3/4
Maple
WHI-CRV5047CH
20 x 5 x 3/4
Cherry
WHI-CRV5047LW
20 x 5 x 3/4
Lindenwood
WHI-CRV5047MA
20 x 5 x 3/4
Maple
WHI-CRV5049CH
12 x 4 x 5/8
Cherry
WHI-CRV5049LW
12 x 4 x 5/8
Lindenwood
WHI-CRV5049MA
12 x 4 x 5/8
Maple
Species
WHI-CRV5636CH
2-1/4 x 9
Cherry
2-1/4 x 9
Petite
Maple
1-7/8 x 7-1/2
Cherry
WHI-CRV5638MA
1-7/8 x 7-1/2
Carved Drops, Medallions & Scrolls
Maple
Unit# 3893076
CARVED SCROLLS
Vineyard
Floral Acanthus
Lindenwood construction. Sold as left/right pair per
card.
Unit# 3893042
CARVED DROPS
Measures 6” W x 14-1/4” H x 1” D.
No.
Rosette – Flower
WHI-CRV5038CH
Cherry
WHI-CRV5038LW
Lindenwood
WHI-CRV5038MA
Maple
Dim. In.
WxHxD
No.
Species
WHI-CRV5078LW
14 x 14 x 7/8
Unit# 3893031
CARVED SCROLLS
Continuous
Unit# 3893037
CARVED SCROLLS
Includes (2) left/right sets. Each piece measures 7” W x
3” H x 3/4” D.
No.
Species
WHI-CRV5634CH
Cherry
WHI-CRV5634MA
Species
Measures 2-3/4” W x 12” H x 5/8” D. Sold 2/card.
No.
Species
WHI-CRV5066CH
12 x 3-1/2 x 13/16
WHI-CRV5066LW
12 x 3-1/2 x 13/16 Lindenwood
WHI-CRV5644CH
Cherry
WHI-CRV5066MA
12 x 3-1/2 x 13/16
WHI-CRV5644MA
Maple
WHI-CRV5065LW
Cherry
Maple
Unit# 3893038
CARVED SCROLLS
Floral
Cabinet Locks
& Latches
Dim. In.
No.
WxHxD
Maple
Dim. In.
No.
WxHxD
department has the
answers you need!
Adhesives
& Caulk
Maple
24 x 6 x 3/4
Decorative
Hardware
36 x 7-1/2 x 7/8
WHI-CRV5048CH
Storage &
Convenience
Dim. In.
WxH
Ribbon
WHI-CRV5636MA
WHI-CRV5638CH
WHI-CRV5046MA
CARVED MEDALLIONS
1/2” Deep. Sold 2/card.
No.
Lindenwood
Petite
36 x 7-1/2 x 7/8
Wood
Products
Ribbon
4-1/2 x 10 x 5/8
Cherry
WHI-CRV5046LW
Lighting
No.
36 x 7-1/2 x 7/8
Species
WHI-CRV5067CH
11 x 5-1/2 x 13/16
WHI-CRV5067LW
WHI-CRV5067MA
11 x 5-1/2 x 13/16
Maple
WHI-CRV5068CH
7 x 3-1/2 x 3/4
Cherry
WHI-CRV5068LW
7 x 3-1/2 x 3/4
Lindenwood
WHI-CRV5068MA
7 x 3-1/2 x 3/4
Maple
Cherry
175
Abrasives
Dim. In.
WxHxD
Species
WHI-CRV5046CH
& Machines
Dim. In.
WxHxD
Shelving
& Hardware
No.
Screws &
Fasteners
Unit# 3893039
CARVED DROPS
Edgebanding
& Veneers
Sinks
CARVED DROPS
WHI-CRV5077LW
Surfacing
Products
Carved Drops, Medallions & Scrolls
Unit# 3893075
Carved Scrolls, Swags, Onlays & Cabinet Feet
Unit # 4031029
ONLAYS
Unit# 3893032
Unit# 3893033
CARVED SCROLLS
CARVED SCROLLS
Ribbon & Wheat
Vineyard
Hand-Carved
ONLAY-2-S Series
Measures 13” W x 2” H x 1/2” D.
No.
WHI-CRV5635CH
Cherry
WHI-CRV5635MA
Maple
Carved Scrolls, Swags, Onlays & Cabinet Feet
Dim. In.
WxHxD
Species
36 x 7 x 7/8
Cherry
No.
Species
WHI-CRV5020CH
ONLAY-3-S Series
WHI-CRV5020LW
36 x 7 x 7/8
WHI-CRV5020MA
36 x 7 x 7/8
Lindenwood
Maple
WHI-CRV5022CH
24 x 4-1/2 x 3/4
Cherry
WHI-CRV5022LW
24 x 4-1/2 x 3/4
Lindenwood
No.
WHI-CRV5022MA
Rosette
24 x 4-1/2 x 3/4
Species
4-1/4” H x 3/4” D
Unit# 3893071
CARVED SCROLLS
Measures 20” L.
Maple
ONLAY-2-S-AL
Alder
ONLAY-2-S-CH
Cherry
ONLAY-2-S-MP
Maple
ONLAY-2-S-RO
Red oak
Unit# 3893030
CARVED SCROLLS
ONLAY-2-S-RW
Woven Fruit Basket
No.
Dim. In.
WxHxD
WHI-CRV5050LW
24 x 5-1/2 x 3/4
WHI-CRV5051LW
12 x 3-1/4 x 5/8
Rubberwood
5” H x 5/8” D
No.
WHI-CRV5630CH
Species
Cherry
WHI-CRV5630MA
ONLAY-3-S-AL
Alder
ONLAY-3-S-CH
Cherry
ONLAY-3-S-MP
Maple
ONLAY-3-S-RO
Red oak
ONLAY-3-S-RW
Rubberwood
Unit# 3893060
Maple
Unit# 3893029
CARVED SWAGS
Unit# 3893070
Fruit
CARVED SCROLLS
Shell
CABINET FEET
Pedestal
No.
No.
Dim. In.
WxHxD
WHI-CRV5040LW
36 x 7 x 7/8
WHI-CRV5043LW
24 x 5 x 3/4
WHI-CRV4044LW
12 x 4 x 5/8
WHI-CRV5632CH
Species
Cherry
WHI-CRV5632MA
Maple
Corner
Unit# 3893073
CARVED SWAGS
Unit# 3893067
CARVED SCROLLS
Left & Right Side
Floral
Vineyard
Center Panel
FT6272 Series. Sold in pairs.
Dim. In.
No.
WxHxD
Corner
Rose
Dim. In.
No.
WxHxD
Species
WHI-CRV5024CH
9 x 4 x 13/16
Cherry
WHI-CRV5024LW
9 x 4 x 13/16
Lindenwood
WHI-CRV5024MA
9 x 4 x 13/16
Maple
WHI-CRV5026LW
6 x 2-1/2 x 5/8
Lindenwood
176
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Laurel
Species
WHI-FT6270CH
8-1/4* x 4 x 1-5/8
Cherry
WHI-FT6270MA
8-1/4* x 4 x 1-5/8
Left & Right Side
Maple
WHI-FT6272CH
8-1/4 x 4 x 1-5/8
Cherry
WHI-FT6272MA
8-1/4 x 4 x 1-5/8
Center Panel
Maple
No.
Desc.
Dim. In.
WxHxD
WHI-CRV5069LW
Floral
16 x 6 x 1-1/2
WHI-CRV5070LW
Floral
12 x 4-1/2 x 1-1/2
WHI-FT6274CH
16 x 2-1/2 x 1
Cherry
WHI-CRV5071LW
Rose
14-3/8 x 6-5/16 x 1-3/16
WHI-FT6274MA
16 x 2-1/2 x 1
Maple
WHI-CRV5072LW
Laurel
12 x 5 3/4
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
* Each side.
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
Bun Feet, Corner Feet & Legs
Unit # 4031015
BUN FEET
Acanthus
Adhesives
& Caulk
Traditional
Red oak
Rubberwood
No.
Unit# 3893061
BUN FEET
Fluted
Desc.
Species
Tall – 3-3/4” W x 8” H
WHI-FT6291CH
Whole
No.
Desc.
Species
Tall – 3-3/4” W x 8” H
Pkg.
Qty.
Species
WHI-FT6260CH
3-3/8 x 4-1/2
Cherry
1
WHI-FT6260MA
3-3/8 x 4-1/2
Cherry
Maple
3-5/8 x 6
Cherry
3-5/8 x 6
Maple
Maple
1
Cherry
2
WHI-FT6262MA
WHI-FT6291HMA
Split
Maple
Standard – 3-3/16” W x 4-1/2” H
2
WHI-FT6293CH
Whole
Cherry
1
WHI-FT6293MA
Whole
Maple
1
Split
Cherry
2
WHI-FT6293HMA
Split
Maple
Heavy – 4-7/8” W x 5-3/8” H
2
WHI-FT6295CH
Whole
Cherry
1
WHI-FT6295MA
Whole
Maple
1
WHI-FT6295HCH
Split
Cherry
2
WHI-FT6295HMA
Split
Maple
2
Unit# 3893064
CORNER FEET
Traditional
Unit # 4031016
WHI-FT6290CH
Whole
Cherry
1
WHI-FT6290MA
Whole
Maple
1
Split
Cherry
2
WHI-FT6290HCH
Dim. In.
WxH
Split
WHI-FT6293HCH
Heavy
No.
Whole
WHI-FT6291HCH
Standard
Measures 2-3/4” D.
Pkg.
Qty.
WHI-FT6262CH
WHI-FT6291MA
Tall
Heavy
Measures 2-3/4” D.
No.
Dim. In.
WxH
Species
BUN FEET
WHI-FT6264CH
3-1/4 x 4-1/2
Cherry
Turned
WHI-FT6264MA
3-1/4 x 4-1/2
Maple
3-3/8 x 6
Cherry
3-3/8 x 6
Maple
WHI-FT6290HMA
Split
Maple
Standard – 3-3/16” W x 4-1/2” H
2
WHI-FT6292CH
Whole
Cherry
1
WHI-FT6266CH
WHI-FT6292MA
Whole
Maple
1
WHI-FT6266MA
Split
Cherry
2
WHI-FT6292HMA
Split
Maple
Heavy – 4-7/8” W x 5-3/8” H
2
WHI-FT6294CH
Whole
Cherry
1
WHI-FT6294MA
Whole
Maple
1
WHI-FT6294HCH
Split
Cherry
2
WHI-FT6294HMA
Split
Maple
2
Unit # 4031025
Lighting
WHI-FT6292HCH
BUNN-2 Series
BUNN-3 Series
No.
Species
LEGS
Acanthus
Quality People
BUNN-2-AL
Alder
BUNN-2-MP
Maple
BUNN-2-RO
Red oak
BUNN-2-RW
Rubberwood
Abrasives
4” x 4”
Quality Products
Standard
Shelving
& Hardware
Tall
Screws &
Fasteners
BUNN-1-RW
Bun Feet, Corner Feet & Legs
Cabinet Locks
& Latches
BUNN-1-RO
Storage &
Convenience
Maple
Wood
Products
Alder
BUNN-1-MP
Decorative
Hardware
Species
BUNN-1-AL
4” x 6”
BUNN-3-AL
Alder
BUNN-3-MP
Maple
BUNN-3-RO
Red oak
BUNN-3-RW
Rubberwood
Measures 3-1/2” x 3-1/2” x 5”.
No.
LEG-2-MP
Species
Maple
177
& Machines
Measures 5” x 3”.
No.
Unit# 3893063
CORNER FEET
Edgebanding
& Veneers
Unit# 3893062
BUN FEET
Legs & Pedestal Feet
Unit # 4031030
Unit # 4031031
PEDESTAL FEET
PEDESTAL FEET
Unit # 4031026
LEGS
Ball & Claw
Rounded Corner
Corner
Right
Left
Corner
Right
Left
Measures 4-1/8” x 4-1/8” x 6”.
No.
Species
LEG-3-AL
Alder
LEG-3-MP
Maple
LEG-3-RO
Red oak
LEG-3-RW
Legs & Pedestal Feet
Rubberwood
Unit # 4031027
LEGS
Queen Anne
Middle
Middle
No.
Species
Corner – 6-1/2” x 6-1/2” x 4”
PED-C-AL
Alder
PED-C-MP
Maple
PED-C-RO
Red oak
PED-C-RW
Rubberwood
Rounded Corner – 5-1/2” x 5-1/2” x 4”
PED-CR-AL
Alder
PED-CR-MP
Maple
PED-CR-RO
Red oak
PED-CR-RW
LEG-6
LEG-7
Measures 4” x 4”.
No.
Rubberwood
Left – 6-1/8” x 4” x 2-1/2”
PED-L-AL
Alder
PED-L-MP
Maple
PED-L-RO
PED-L-RW
Species
6” Height
Red oak
Rubberwood
Right – 6-1/8” x 4” x 2-1/2”
PED-R-AL
Alder
LEG-6-AL
Alder
PED-R-MP
Maple
LEG-6-MP
Maple
PED-R-RO
Red oak
LEG-6-RO
Red oak
PED-R-RW
LEG-6-RW
Rubberwood
8” Height
LEG-7-AL
Alder
Rubberwood
Middle – 11-1/2” x 1-3/4”
PED-M-AL
Alder
PED-M-MP
Maple
LEG-7-MP
Maple
PED-M-RO
Red oak
LEG-7-RO
Red oak
PED-M-RW
Rubberwood
LEG-7-RW
Rubberwood
No.
Species
Corner – 8-1/4” x 8-1/4” x 4”
PED-2-C-AL
Alder
PED-2-C-CH
Cherry
PED-2-C-MP
Maple
PED-2-C-RO
Red oak
PED-2-C-RW
Rubberwood
Left – 8-1/4” x 4”
PED-2-L-AL
Alder
PED-2-L-CH
Cherry
PED-2-L-MP
Maple
PED-2-L-RO
Red oak
PED-2-L-RW
Rubberwood
Right – 8-1/4” x 4”
PED-2-R-AL
Alder
PED-2-R-CH
Cherry
PED-2-R-MP
Maple
PED-2-R-RO
Red oak
PED-2-R-RW
Rubberwood
Middle – 16” x 3” x 1”
PED-2-M-AL
Alder
PED-2-M-CH
Cherry
PED-2-M-MP
Maple
PED-2-M-RO
Red oak
PED-2-M-RW
Rubberwood
we carry are listed
in this catalog.
please contact
your local branch
for assistance.
178
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Sinks
Pulls, Knobs, Drawer Boxes & Components
Unit # 3447018
DRAWER COMPONENTS
Cherry
WHI-CRV5032LW
Lindenwood
WHI-CRV5032MA
Maple
Small – 4-1/2” W x 1-7/8” H x 1-1/4” D
Solid birch construction with UV clearcoat finish.
Ht.
In.
No.
Drawer Sides – 22” Length
WHI-CRV5034CH
Cherry
WHI-CRV5022LW
Lindenwood
D8000DNL2
2-1/2
Maple
D8005DNL2
3-1/2
D8010DNL2
4
KNOBS
D8020DNL2
6
Vineyard
D8025DNL2
8
D8030DNL2*
10
Small
WHI-CRV5022MA
Pulls, Knobs, Drawer Boxes & Components
Unit# 3893035
Measures 1-1/2” dia. x 1-5/16” D. Sold 4/card.
No.
Species
WHI-CRV5036CH
Cherry
WHI-CRV5036LW
Lindenwood
WHI-CRV5036MA
Maple
Unit # 4044001
D8035DNL2
10
Drawer Fronts/Backs – 67” Length
D8040DNL2
2-1/2
D8045DNL2
3-1/2
D8050DNL2
4
D8060DNL2
6
D8065DNL2
8
D8070DNL2*
10
D8075DNL2
10
Decorative
Hardware
WHI-CRV5032CH
Drawer Bottoms – 60” Length
CUSTOM DRAWER BOXES
D8017GNL2
21-7/8
Wood
Products
Storage &
Convenience
*Side components have finished radius on both edges. Fronts/Backs have solid edge on both
sides.
Screws &
Fasteners
Large
Small. Sold 2/card.
No.
Species
Large – 12” W x 3-3/4” H x 1-1/2” D
Shelving
& Hardware
Vineyard
Adhesives
& Caulk
Edgebanding
& Veneers
Unit# 3893034
PULLS
Material Options
Corner Options
Top Edge Options
Solid wood
Dovetail
Bullnose
Plywood
Doweled
Flat top
Melamine/processed
Nailed
1/2” or 5/8” Thick
Lighting
• Kansas City, KS
• Wichita, KS
• Springfield, MO
• Tulsa, OK
Cabinet Locks
& Latches
Drawer construction is held to the following tolerances:
Width
1/32" + / Depth
1/16” + / Height
1/16” + / -
to serve you:
Abrasives
All of our drawers are custom and made
to your specifications.
Finger joint
Mixed
Mitered
Contact your ISC Surfaces representative
for complete information!
179
& Machines
Angle dovetails
NOTES
180
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Bi-Pin
High Output – HO-LED
For display, showcase and soffit applications where high
light
levels
are
required. Features (3)
1W LEDs, brushed
aluminum
housing,
and 79” connecting
cable with plug-in connector. Stainless steel.
Unit # 3403047
UNDERCABINET LIGHTS
Ecostrip
For use with halogen spotlights. 10,000 hour average
bulb life.
No.
Watts
20
Unit # 3403084
LED SPOTLIGHTS
HOLED1WW
Non-swivel
2-11/16 x 1-1/4
HOLED2WW
±20° Swivel
Cool White
3-1/8 x 1-5/16
HOLED1
Non-swivel
2-11/16 x 1-1/4
HOLED2
±20° Swivel
3-1/8 x 1-5/16
Can-LED
Surface mount fixture with integrated on/off switch.
Features 20 Watt frosted halogen lamps and built-in
electronic transformer. White.
Connecting Cables
ECS19
19-1/4
2
36
LEDCC72
72
Unit # 3403073
25-1/4
w/ Hardwire Option
3
ECS13 HW
13-3/8
1
ECS19 HW
19-1/4
2
ECS25 HW
25-1/4
Undercabinet Lights & Spotlights
3
Miniature – Eye-LED
For use in confined spaces; fits
into 1‘” dia. x 1/2” deep
recessed opening. Features 1W
LED and 51” connecting cable
with plug. 1-1/8” diameter. UL
listed.
Plexi
Unit # 3403013
XENON SPOTLIGHTS
Recess Mounted
For ceiling installation in residential or commercial
applications. Features (6) 1W LEDs and integral
350mA constant current DC converter. Measures
12-7/8” L. 4-7/8” recess depth. UL listed.
Swivel. Features ±10° movement. 5-1/8” diameter.
Plexi. Features frosted plexiglas collar. 5-3/8” diameter.
No.
Desc.
Finish
Swivel
EYELEDA/WW
LEDCAN6/WH/WW
Warm white
White
EYELEDSS/WW
LEDCAN6/SS/WW
Warm white
Stainless steel
LEDCAN6/WH/CW
Cool white
LEDCAN6/SS/CW
Cool white
Plexi
White
Stainless steel
No.
Black
XR1GO
Gold
XR1SS
Stainless steel
XR1WH
White
Surface Mounted – 1-1/8” H
XS1BL
Black
XS1CH
Chrome
XS1GO
Gold
XS1SS
Stainless steel
XS1WH
White
Brushed aluminum
EYELEDSS/CW
Stainless steel
Unit # 3403003
LEDCAN6/PL/WW
Warm white
–
LED SPOTLIGHTS
LEDCAN6/PL/CW
Cool white
–
Low Profile
Eco-LED
Chrome
Stainless steel
EYELEDA/CW
Features aluminum reflector, frosted glass lens, 18W
bulb with 8000 hour life, and attached 79” connecting
cable with NV6 plug. 3-1/8” diameter.
No.
Finish
Recess Mounted – 7/8” H
XR1CH
Brushed aluminum
Cool White
Unit # 3403078
XR1BL
Finish
Warm White
LED SPOTLIGHTS
Surface Mounted
No.
For recess or surface mounting in undercabinet, furniture or display case applications. Features 1W LEDs
with 50,000 hour life, and 79” connecting cable with
plug-in connector. 2-3/8” diameter. Sold in sets of 3
with 350mA constant current DC converter.
No.
Finish
Warm White
SET2LEDWH/WW
White
SET2LEDSS/WW
Screws &
Fasteners
ECS25
LED SPOTLIGHTS
Stainless steel
Cool White
For surface or recess
mounting in cabinets,
furniture and displays.
Features (3) 1 Watt
LEDs with 50,000 hour
life. 2-11/16” diameter.
Includes 72” connecting cable with plug.
Finish
Warm White – 3200K
ARFLED3200BL
Black
ARFLED3200CH
Chrome
ARFLED3200GO
Gold
ARFLED3200SS
Stainless steel
ARFLED3200WH
Cool White – 5500K
White
ARFLED5500BL
Black
ARFLED5500CH
Chrome
ARFLED5500GO
Gold
Stainless steel
White
SET2LEDWH/CW
White
ARFLED5500SS
SET2LEDSS/CW
Stainless steel
ARFLED5500WH
181
Wood
Products
1
LEDCC36
Lighting
13-3/8
Swivel
Cabinet Locks
& Latches
ECS13
Lgth.
In.
No.
No.
Lights
Abrasives
No.
Lgth.
In.
w/ Connecting System
Dim. In.
Dia. x H
Desc.
Warm White
Adhesives
& Caulk
X-HB20W
No.
Decorative
Hardware
18
X-B18W
Spotlights
Shelving
& Hardware
10
Storage &
Convenience
X-HB10W
Edgebanding
& Veneers
LED SPOTLIGHTS
Sinks
Unit # 3403081
XENON BULBS
& Machines
Lighting
Surfacing
Products
Undercabinet Lights & Spotlights
Unit # 3403058
LED Lights
Corner Extrusions
Measures 11/16” H.
Unit # 3403068
LED SPOTLIGHTS
Flexible – Flex-LED
Lgth
In.
No.
Unit # 3403070
LED SPOTLIGHTS
Recessed – Swivel – Big6
For display case or
soffit applications
where high light
levels are required.
Features (6) 1W
LEDs, ±10° swivel,
and 79” connecting cable with plugin connector. Measures 5-1/8” dia. x 1-3/4” H. Includes
350mA constant current DC converter.
No.
White
Stainless steel
Cool White
Standard
Atlantis
White
BIG6SS/CW
LED Lights
Stainless steel
Unit # 3403008
LED SPOTLIGHTS
Swivel
For
low-profile
recessed mounting
in showcases, cabinets and other displays. Features (3)
1W 50,000 hour
LEDs
and
±20°
swivel. Measures 2” dia. x 1-3/4” H. Includes 79” connecting cable with plug.
No.
Finish
35-7/16
Linear – LinkStrip-LED
Light Fixtures
Side Mount
No.
For display or reading light applications. Features 20” L
x 3/8” dia. flexible arm, 1W LED, and 51” connecting
cable with plug-in connector. Chrome.
No.
Desc.
Standard
FLEXLED/WW
Warm white
FLEXLED/CW
Cool white
Warm white
ATLANTIS/CW
Cool white
Edenroc
EDENROC/WW
Warm white
EDENROC/CW
Cool white
Warm white
LINKSTRIPLEDC
Cool white
Connecting Cables
Allow spacing of multiple fixtures.
Lgth.
In.
LINKSTRIPCC/6
6
LINKSTRIPCC12
12
LINKSTRIPCC36
36
Unit # 3403082
DISPLAY CASE LIGHT FIXTURES
Side Mount – Left
High Output – Tower-LED
Black
EH24LED3200CH
Chrome
EH24LED3200GO
Gold
EH24LED3200SS
Stainless steel
SIDE/R/S/WW
Warm white
White
SIDE/R/S/CW
Cool white
SIDE/L/S/WW
Desc.
LINKSTRIPLEDW
No.
Atlantis
ATLANTIS/WW
EH24LED3200BL
EH24LED3200WH
LEDSTRIPEXT/3
For showcase, display or undercabinet applications.
Features 1W LEDs, anodized aluminum housing with
plexiglas cover, and integral connecting system for
direct attachment of multiple fixtures. Measures 12” L x
1-1/8” W x 1/4” H. UL listed.
Edenroc
BIG6WH/CW
23-5/8
Unit # 3403083
Warm White
BIG6SS/WW
11-7/8
LEDSTRIPEXT/2
LED LIGHT FIXTURES
Finish
BIG6WH/WW
LEDSTRIPEXT/1
Warm white
SIDE/L/S/CW
Cool white
Side Mount – Right
EH24LED5500BL
Black
EH24LED5500CH
Chrome
EH24LED5500GO
Gold
EH24LED5500SS
Stainless steel
EH24LED5500WH
White
Unit # 3403077
LED LIGHT FIXTURES
Linear – Strip-LED
Features (3) 3W LEDs, brushed aluminum and plexiglas housing, 125° swiveling, and 79” connecting cable
with plug-in connector. Measures 8-1/2” H x 1-1/16” W.
Includes constant current DC converter.
No.
Desc.
Unit # 3403080
LED LIGHT FIXTURES
Linear – LumiMax
For surface or recessed mounting in showcase, display
or undercabinet applications. Features 3W LEDs,
frosted plexiglas housing, and constant current DC
converter. Measures 1-7/16” W x 1/2” H. UL listed.
Lgth.
No.
No.
In.
LEDs
Warm White
LUMIMAX13/WW
13-3/4
For surface or recessed mounting in showcase, display
or furniture applications. Features 1W LEDs with
50,000 hour life, anodized aluminum housing with
plexiglas cover, and 69” connecting cable with plug-in
connector. Measures 1-1/8” W x 1/4” H. UL listed.
No.
Light Fixtures
Lgth.
In.
Warm White
Cool white
LEDSTRIPWW/1
11-7/8
3
2
LEDSTRIPWW/2
23-5/8
6
LEDSTRIPWW/3
35-7/16
Cool White
9
25-1/2
4
LUMIMAX37/WW
37-7/16
Cool White
6
LEDSTRIP/1
11-7/8
LUMIMAX13
13-3/4
2
LEDSTRIP/2
23-5/8
6
LUMIMAX25
25-1/2
4
LEDSTRIP/3
35-7/16
9
LUMIMAX37
37-7/16
6
182
Warm white
TOWER-LED/CW
No.
LEDs
LUMIMAX25/WW
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
TOWER-LED/WW
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
3
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Fluorescent Lights
Unit # 3403032
Unit # 3403038
LIGHT HOUSINGS
SlimLite
HighLite
Sinks
FLUORESCENT LIGHTS
Unit # 3403009
For recessed, semi-recessed or surface mounting in
display and undercabinet applications. Features 7W
lamp with 6000-hour life, integrated electronic ballast,
and 79” power cord. UL and CUL listed.
Spotlights
No.
Finish
No.
ES10WW/P
7
10
ES13WW/P
10
13
ES20WW/P
18
Cool White
20
FS7WW/BA
Brushed aluminum
FS7WW/WH
White
Lgth.
In.
Watts
Warm White
ES10/P
7
Rounded brushed anodized aluminum housing with
plexiglas cover. Includes SlimLite XL fluorescent light
with built-in electronic ballast. Mounts vertically or horizontally.
Lgth.
No.
Ft.
Watts
HL30
2
14
HL42
3
21
10
HL54
4
28
HL65
5
35
ES13/P
10
13
ES20/P
18
20
Unit # 3403027
FS7/BA
Brushed aluminum
FS7/WH
White
No.
No.
Desc.
SMC
Fluorescent Lights
Replacement Bulbs
Desc.
FLUORESCENT LIGHT COVERS
Accessories
Plexiglas – SlimLite XL
Mounting clip
Unit # 3403033
FLUORESCENT LIGHTS
FSB7WW
Warm white
FSB7
Cool white
SlimLite XL
For
Model No.
No.
Decorative
Hardware
Lights
Features built-in ballast, low heat index, compact housing, plexiglas lamp cover and 10,000-hour lamp. Multiple units connect to form continuous rows.
Shelving
& Hardware
FluoroSpot
Adhesives
& Caulk
Edgebanding
& Veneers
FLUORESCENT SPOTLIGHTS
SHELF LIGHTING SYSTEMS
X-Lite
For use in standard retail shelving;
positions
SlimLite XL fixture to illuminate
front of product.
Features
extruded aluminum construction
with anodized finish and integral 11/4” ticket strip.
Includes installation screws and
wing nuts.
Finish
Lights
Lgth.
In.
For use in displays, furniture and cabinetry. Features
built-in electronic ballast. Switch on each side of fixture. Measures 1-5/8” H x 7/8” W. 110V. Includes
4100K cool white bulb, cover and direct connector.
ES22
Fluorescent
14
22
Lights
ES34
Fluorescent
21
34
ES46
Fluorescent
28
46
35
59
22
Watts
Lumens
Lgth.
In.
EL23/5
14
880
23-13/16
EL35/5
21
2100
35-5/8
EL47/5
28
2900
47-3/8
No.
ES59
Accessories
No.
ELPC
No.
Fluorescent
With Bulb & Cover
ES22/BC
Cool white
14
ES22WW/BC
Warm white
14
22
ES34/BC
Cool white
21
34
ES34WW/BC
Desc.
ES46/BC
Power cord, 79”
Desc.
Watts
Without Bulb & Cover
Warm white
Cool white
21
28
34
46
Connector cord, 6”
ES46WW/BC
Warm white
28
46
ELCC/12
ES59/BC
Cool white
35
59
ELCC/20
ES59WW/BC
Warm white
35
59
ELCC/40
ELCC/6
ELDC
Direct connector
No.
SMC/XL
Accessories
Desc.
Mounting clip
No.
2-Ft. Length
EX22
Aluminum
EX22A
Almond
EX22WH
White
3-Ft. Length
EX34
Aluminum
EX34A
Almond
EX34WH
White
4-Ft. Length
EX46
SMC/XL/S90
90° Mounting clip for side mount
EX46A
SMC/XL/S45
45° Mounting clip for side mount
EX46WH
Aluminum
Almond
White
183
Storage &
Convenience
Unit # 3403076
Surface mounted 110V fixture with built-in electronic
ballast. Rated lamp life 10,000 hours. Multiple units
connect to form continuous rows.
Wood
Products
ES59
Lighting
ES46
SPLEX59
Cabinet Locks
& Latches
ES34
SPLEX46
Abrasives
ES22
SPLEX34
& Machines
E-Lite
SPLEX22
Screws &
Fasteners
Unit # 3403059
FLUORESCENT LIGHTS
Fluorescent Bulbs & Halogen Spotlights
Unit # 3403072
Unit # 3403053
HALOGEN SPOTLIGHTS
HALOGEN SPOTLIGHTS
10 Watt – Adjustable
Unit # 3403022
FLUORESCENT BULBS
Desc.
Watts
For SlimLite
SFB7CW
Cool white
7
SFB7WW
Warm white
7
For accent lighting in vanity, display, furniture and
marine applications. Features aluminum reflector,
screw-on decor ring, and attached 79” connecting
cable with NV6 plug. Friction fit design. Measures
2-5/8” dia. x 7/8” H. UL and ETL listed.
No.
Watts
Recess Mounted
Finish
SFB10CW
Cool white
10
SFB10WW
Warm white
10
SFB18CW
Cool white
18
ER110BL
10
Black
18
ER110CH
10
Chrome
SFB18WW
Warm white
Cool white
SFB14WW
Surface Mounted
ER110GO
10
Gold
14
ER110SS
10
Stainless steel
White
For SlimLite XL
SFB14CW
Recess Mounted
Surface Mounted
Recess Mounted
No.
For cabinetry, showcase or display applications. Features aluminum reflector, clear tempered glass lens,
±30° swivel range, and attached 79” connecting cable
with NV6 plug. Measures 2-5/8” dia. x 1-3/4” H. ETL
listed.
No.
Finish
Recess Mounted
Warm white
14
ER110WH
10
SFB21
White
21
ER120BL
20
Black
SFB21/BL
Blue
21
ER120CH
20
Chrome
SFB21/GR
Green
21
ER120GO
20
Gold
ER210BL
Black
Red
21
ER120SS
20
Stainless steel
ER210CH
Chrome
ER120WH
White
ER210GO
Gold
ER210WH
White
SFB21/RED
SFB21CW
Cool white
21
SFB21WW
Warm white
21
20
Surface Mounted
Surface Mounted
SFB28
White
28
ES110BL
10
Black
SFB28/BL
Blue
28
ES110CH
10
Chrome
ES210BL
Black
Chrome
SFB28/GR
SFB28/RED
Green
28
ES110GO
10
Gold
ES210CH
Red
28
ES110SS
10
Stainless steel
ES210GO
Gold
10
White
ES210WH
Fluorescent Bulbs & Halogen Spotlights
White
SFB28CW
Cool white
28
ES110WH
SFB28WW
Warm white
28
ES120BL
20
Black
20
Chrome
Unit # 3403061
HALOGEN SPOTLIGHTS
SFB35
White
35
ES120CH
SFB35/BL
Blue
35
ES120GO
20
Gold
SFB35/GR
Green
35
ES120SS
20
Stainless steel
Red
35
ES120WH
20
White
SFB35/RED
SFB35CW
Cool white
35
SFB35WW
Warm white
For FD44/14
35
White
14
SFB14/BL
Blue
14
SFB14/GR
Green
14
Red
14
Proudly Serving
Kansas, Missouri
& Oklahoma
Recess Mounted
Unit # 3403001
SFB14
SFB14/RED
HALOGEN SPOTLIGHTS
Surface Mounted
For surface or recess mounting. Aluminum reflector.
Attached 6” connecting cable with NV6 plug. 12V.
Includes bulb.
No.
Finish
10 Watt
For vanities, cabinets, furniture, displays or boats. Features polished aluminum reflector, tempered frosted
glass lens and 72” connecting cable with plug. Friction
fit design. 4000-hour bulb life. 2-15/16” diameter. 12V.
Includes bulb and 72” connecting cable with plug. UL
and ETL listed.
No.
Finish
AH1110WH
White
ARF20BL
Black
AH1110BL
Black
ARF20CH
Chrome
AH1110CH
Chrome
ARF20GO
Gold
Gold
ARF20SS
Stainless steel
AH1110GO
184
ARF20WH
20 Watt
AH1120WH
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
20 Watt
White
Surface Mounted – 7/8” H
White
AH1120BL
Black
ARFS20BL
Black
AH1120CH
Chrome
ARFS20CH
Chrome
AH1120GO
Gold
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
ARFS20GO
Gold
ARFS20SS
Stainless steel
ARFS20WH
White
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Halogen Spotlights
Unit # 3403050
Unit # 3403011
HALOGEN LIGHT SETS
Recessed
Premium – Swivel
Sinks
HALOGEN SPOTLIGHTS
Unit # 3403063
Compact
Black
EH1110CH
Chrome
KB1210BL
10
Black
EH1110GO
Gold
KB1210CH
10
Chrome
EH1110WH
White
KB1210GO
10
Gold
KB1210SS
10
Stainless steel
EH1120BL
Black
KB1210WH
10
White
EH1120CH
Chrome
KB1220BL
20
Black
KB1220CH
20
Chrome
KB1220SS
KB1220WH
20
20
20
Surface Mounted – 1” H
Gold
Gold
EH1120WH
Halogen Spotlights
White
Stainless steel
White
Black
E/SET1EH24CH
Chrome
E/SET1EH24GO
Gold
E/SET1EH24WH
White
3 Light Sets
E/SET2EH24BL
Black
E/SET2EH24CH
Chrome
E/SET2EH24GO
Gold
E/SET2EH24WH
White
5 Light Sets
E/SET3EH24BL
Black
E/SET3EH24CH
Chrome
E/SET3EH24GO
Gold
E/SET3EH24WH
White
Unit # 3403051
HALOGEN SPOTLIGHTS
KBS1210BL
10
Black
KBS1210CH
10
Chrome
KBS1210GO
10
Gold
KBS1210SS
10
Stainless steel
KBS1210WH
10
White
KBS1220BL
20
Black
KBS1220CH
20
Chrome
KBS1220GO
20
Gold
KBS1220SS
20
Stainless steel
20
White
KBS1220WH
EH1120GO
E/SET1EH24BL
Unit # 3403030
Recessed – Swivel
HALOGEN SPOTLIGHTS
TriTech
Storage &
Convenience
KB1220GO
20 Watt
Finish
2 Light Sets
Decorative
Hardware
EH1110BL
No.
For use in wood or sheet metal cabinets and display
cases. Features polished aluminum reflector, tempered
glass lens and 72” connecting cable with plug. Friction
fit design. 4000-hour bulb life. 2-5/8” diameter.
No.
Watts
Finish
Features aluminum reflector and attached 6” connecting cable with NV6 plug. 2-15/16” diameter. Includes
bulb.
No.
Finish
10 Watt
Shelving
& Hardware
Surface Mounted
Screws &
Fasteners
Recess Mounted
For surface or recess mounting. 20 Watt. Includes
EH24 lights, transformer, cables, terminal block and
instructions.
Adhesives
& Caulk
Edgebanding
& Veneers
HALOGEN SPOTLIGHTS
AR20BL
Black
AR20CH
Chrome
AR20GO
Gold
AR20WH
White
Thermally Optimized
CBS20BL
Black
CBS20CH
Chrome
CBS20GO
Gold
CBS20WH
White
For recessed mounting. Features metal housing, ±20°
swivel range, and attached 6” connecting cable with
NV6 plug. Includes bulb.
No.
Finish
For undercabinet applications. 12V, 20W. Includes 79”
connecting cable.
No.
Finish
EH2420BL
Black
TR20CO
Copper
EH2420CH
Chrome
TR20SS
Stainless steel
EH2420GO
Gold
TR20WH
EH2420SS
Stainless steel
EH2420WH
White
White
Cabinet Locks
& Latches
Unit # 3403055
HALOGEN SPOTLIGHTS
Enterprise
Abrasives
For use in fly-over shelves.
Features tempered frosted
glass lens, 12V/20W bulb
with 4000 hour
life,
and attached 6” connecting
cable with plug. Measures
2-11/16” dia. x 1-3/4” H.
Standard. Requires 4” minimum distance to doors and
1’ to combustible materials.
Thermally Optimized. Requires 3/8” minimum distance to doors; features glass reflector and filtering
lens to reduce heat on doors located directly underneath. Requires 1-1/2” clearance at rear of fixture.
No.
Finish
Standard
Let ISC Surfaces
20-Watt light integrated into frosted glass disc. Mounts
with 2” W x 3/4” D stainless steel mounting bracket.
Includes 79” connecting cable.
No.
Finish
EN20PF
Stainless steel
185
& Machines
Recessed
Lighting
HALOGEN SPOTLIGHTS
Wood
Products
Unit # 3403067
Undercabinet & Halogen Lights
No.
Watts
No.
Finish
3 Light Sets
Unit # 3403066
UNDERCABINET LIGHTS
Wave
For furniture, cabinet
and display applications. Features integrated 20W halogen
lamp,
single-screw
installation and 70” connecting cable. Measures
8-9/16” L x
3-1/2” W x 15/16” H.
Watts
Finish
3 Light Sets
C/SET2ES110BL
10
Black
E/SET210BL
10
Black
C/SET2ES110CH
10
Chrome
E/SET210CH
10
Chrome
C/SET2ES110GO
10
Gold
E/SET210GO
10
Gold
C/SET2ES110SS
10
Stainless steel
E/SET210WH
10
White
C/SET2ES110WH
10
White
E/SET220BL
20
Black
C/SET2ES120BL
20
Black
E/SET220CH
20
Chrome
C/SET2ES120CH
20
Chrome
E/SET220GO
20
C/SET2ES120GO
20
Gold
E/SET220WH
C/SET2ES120SS
20
Stainless steel
C/SET2ES120WH
20
5 Light Sets
White
Gold
20
5 Light Sets
White
E/SET310BL
10
Black
E/SET310CH
10
Chrome
C/SET3ES120BL
20
Black
E/SET310GO
10
Gold
20
Chrome
E/SET310WH
10
White
Finish
C/SET3ES120CH
ARFWAVEMCH
Matte chrome
C/SET3ES120GO
20
Gold
E/SET320BL
20
Black
ARFWAVESS
Undercabinet & Halogen Lights
Stainless steel
C/SET3ES120SS
20
Stainless steel
E/SET320CH
20
Chrome
C/SET3ES120WH
20
White
E/SET320GO
20
Gold
E/SET320WH
20
White
No.
Unit # 3403002
HALOGEN SPOTLIGHTS
Swiveling
No.
ArcTech
10
Black
10
Chrome
C/SET1ES210GO
10
No.
10
3 Light Sets
Premium
Gold
White
C/SET2ES210BL
10
Black
C/SET2ES210CH
10
Chrome
C/SET2ES210GO
10
10
5 Light Sets
Unit # 3403010
HALOGEN LIGHT SETS
C/SET1ES210CH
C/SET2ES210WH
AL20SS
Finish
C/SET1ES210BL
C/SET1ES210WH
For addition of indirect lighting. Stainless steel housing.
Includes 79” connecting cable.
Watts
2 Light Sets
Gold
White
C/SET3ES210BL
10
Black
C/SET3ES210CH
10
Chrome
Volts
Watts
C/SET3ES210GO
10
Gold
12
20
C/SET3ES210WH
10
White
For surface or recess mounting. 20 Watt. Includes
ARFS lights, 71” connecting cable, transformer, terminal block, screws and instructions.
No.
Finish
2 Light Sets
Unit # 3403090
HALOGEN LIGHT SETS
Unit # 3403045
HALOGEN LIGHT SETS
Ecoline
E/SET1ARFS20B
Black
E/SET1ARFS20C
Chrome
E/SET1ARFS20G
Gold
E/SET1ARFS20S
Stainless steel
E/SET1ARFS20W
Premium
White
3 Light Sets
mounting.
Includes
lights, 79” connecting
cable,
transformer,
terminal
block,
screws and instructions.
E/SET2ARFS20B
Black
E/SET2ARFS20C
Chrome
E/SET2ARFS20G
Gold
E/SET2ARFS20S
Stainless steel
E/SET2ARFS20W
White
5 Light Sets
Non-Swiveling
Watts
2 Light Sets
No.
Finish
For surface or recess mounting. Includes AH11 spotlights, transformer, cables, terminal block, screws and
instructions.
No.
Watts
Finish
2 Light Sets
C/SET1ES110BL
10
Black
C/SET1ES110CH
10
Chrome
C/SET1ES110GO
10
Gold
E/SET110BL
10
Black
C/SET1ES110SS
10
Stainless steel
E/SET110CH
10
Chrome
C/SET1ES110WH
10
White
E/SET110GO
10
Gold
C/SET1ES120BL
20
Black
E/SET110WH
10
White
C/SET1ES120CH
20
Chrome
E/SET120BL
20
Black
C/SET1ES120GO
20
Gold
E/SET120CH
20
Chrome
C/SET1ES120SS
20
Stainless steel
E/SET120GO
20
Gold
C/SET1ES120WH
20
White
E/SET120WH
20
White
186
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
E/SET3ARFS20B
Black
E/SET3ARFS20C
Chrome
E/SET3ARFS20G
Gold
E/SET3ARFS20S
Stainless steel
E/SET3ARFS20W
White
We are continually
Call us with your
inquiries.
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Halogen Lights & Arc Lamps
Unit # 3403005
Unit # 3403043
ARC LAMPS
ARC LAMPS
Sinks
Halogen
Unit # 3403044
E/SET1KBS20BL
Black
E/SET1KBS20CH
Chrome
E/SET1KBS20GO
Gold
E/SET1KBS20SS
Stainless steel
E/SET1KBS20WH
White
3 Light Sets
E/SET2KBS20BL
Black
E/SET2KBS20CH
Chrome
E/SET2KBS20GO
Gold
E/SET2KBS20SS
Stainless steel
E/SET2KBS20WH
12-1/4
White
BL1/20BL
12-1/4
Black
BL1/20CH
12-1/4
Chrome
BL1/20GO
12-1/4
Gold
BL1/20MCH
12-1/4
Matte chrome
BL1/20NI
12-1/4
Matte nickel
BLG1/20WH
12-1/4
White
BLG1/20BL
12-1/4
Black
BLG1/20CH
12-1/4
Chrome
BLG1/20GO
12-1/4
Gold
BLG1/20MCH
12-1/4
Matte chrome
12-1/4
Matte nickel
BLG1/20NI
White
BLG2/50WH
25-1/2
Black
BLG2/50BL
25-1/2
Black
E/SET3KBS20CH
Chrome
BLG2/50CH
25-1/2
Chrome
E/SET3KBS20GO
Gold
BLG2/50GO
25-1/2
Gold
E/SET3KBS20SS
Stainless steel
BLG2/50MCH
25-1/2
Matte chrome
BLG2/50NI
25-1/2
Matte nickel
E/SET3KBS20WH
Halogen Lights & Arc Lamps
35
MR1650
50
Unit # 3403014
CONNECTING CABLES
2NV6
50 Watt
5 Light Sets
E/SET3KBS20BL
20
MR1635
2 Light Sets
BL1/20WH
White
White
Low voltage. For making connections between transformer and spotlights.
Lgth.
In.
No.
For LED Spotlights
Unit # 3403006
Unit # 3403046
HALOGEN BULBS
MIN/500
20
MINI/1000
39
MINI/1800
For Halogen & Xenon Spotlights
82
2NV6500
20
2NV61000
39
Unit # 3403006
ARC LAMPS
Bi-Pin
Antique
Clear
10
Clear
20
Lighting
EB10
20
PB10
Clear
10
PB20
Clear
20
Features frosted glass shade. 12V, 20W. Includes bulb
and 79” connecting cable with NV6 plug.
No.
Finish
Unit # 3403004
HALOGEN BULBS
MR11 lensed bulb for use in
EH24 spotlight. 30° beam
angle. 3000 hour average
bulb life.
No.
Volts
Watts
BEH24
12
20
BL1CO/A
Antique copper
BL1BB/A
Antique brass
Cabinet Locks
& Latches
Frosted
Premium – 4000 Hr. Average Life
119
Watts
EB20
EBF20
79
2NV63000
Our pledge is
customer service.
Abrasives
G4 socket design.
No.
Desc.
Ecoline – 2000 Hr. Average Life
2NV62000
Shelving
& Hardware
Finish
Watts
187
& Machines
No.
No.
MR1620
Screws &
Fasteners
20 Watt
Lensed bulb with 3000 hour average life.
Note: Available in 11° to 60° beam angle; specify when
ordering.
Storage &
Convenience
For installation in halogen lighting systems. Features
metal housing. Arm measures 3/8” diameter; head
measures 2-3/4” L. Includes bulb and 79” connecting
cable with NV6 plug.
BLG1 & BLG2 Series. Feature 360° swivel head.
Arm
No.
Lgth. In.
Finish
Wood
Products
mounting.
20 Watt.
Includes KBS12 spotlights,
transformer,
connecting cables, terminal block, screws
and instructions.
Decorative
Hardware
Premium
Adhesives
& Caulk
Edgebanding
& Veneers
HALOGEN LIGHT SETS
Connecting Cables, Dimmers, Decor & Distance Rings
Unit # 3403086
Unit # 3403021
DECOR RINGS
DIRECT CONNECTORS
SlimLite
For connecting fixtures in continuous
rows where no space between fixtures
is desired. White.
Decor Ring
Unit # 3403020
CONNECTING CABLES
Decor Ring w/ Light Shield
Holds glass lens in place. For use with AH11 & EH11
series spotlights.
Connecting Cable
No.
Connecting Cable w/ 90° Connector
No.
DRBL
Decor ring
Black
DRCH
Decor ring
Chrome
DRGO
Decor ring
Gold
DRWH
Decor ring
White
DRSBL
Decor ring w/ light shield
Black
DRSCH
Chrome
DRSGO
Desc.
SDC/XL
Desc.
Finish
For AH11 & EH11 Series Spotlights
Direct connector
Unit # 3403085
White.
Desc.
Lgth.
In.
SCC6/XL
Connecting cable
6
SCC6/SP
Connecting cable w/ 90°
connector
6
Connecting cable w/ straight
connector
6
No.
SCC6/STC
SCC6/STC/F
SCC12/XL
SCC12/XL/CD
No.
Gold
For KB12 Series Spotlights
White
6
Connecting cable
12
DR12BL
Decor ring
Black
Connecting cable w/ conduit
cover
12
DR12CH
Decor ring
Chrome
DR12GO
Decor ring
Gold
DR12SS
Decor ring
Stainless steel
12
DR12WH
Decor ring
For XR1 Xenon Spotlights
White
Dimming signal cable
12
X-DRBL
Decor ring
Black
SCC24/XL
Connecting cable
24
X-DRCH
Decor ring
Chrome
SCC24/SP
connector
24
X-DRGO
Decor ring
Gold
X-DRSS
Decor ring
Stainless steel
connector
24
24
EDRBL
Decor ring
Black
Connecting cable
48
EDRCH
Decor ring
Chrome
Connecting cable w/ conduit
cover
48
EDRGO
Decor ring
Gold
EDRSS
Decor ring
Stainless steel
SCC24/STC
SCC24/STC/F
SCC48/XL
SCC48/XL/CD
SCC48/STC
SCC48/STC/F
SCC72/XL
SCC72/STC
SCC72/STC/F
connector
48
48
Connecting cable
72
connector
72
72
X-DRWH
Chrome
DI13GO
Gold
DI13SS
Stainless steel
White
DIBL
Black
DICH
Chrome
DIGO
Gold
DIWH
White
For KB12 Series Spotlights
Decor ring
White
For ER & ES Series Spotlights
S12BL
Black
S12CH
Chrome
S12GO
Gold
S12SS
Stainless steel
S12WH
White
For ER1 Series Spotlights
EDRWH
Decor ring
White
Connecting Cables, Dimmers, Decor & Distance Rings
EDIBL
Black
EDICH
Chrome
EDIGO
Gold
EDISS
Stainless steel
EDIWH
White
For ER2 Series Spotlights
ED2BL
Black
ED2CH
Chrome
Unit # 3403034
Unit # 3403034
DIMMERS
Touch
Unit # 3403015
Black
DI13CH
For AH11 Series Spotlights
12
SCC12/STC/F
DI13BL
DI13WH
connector
SCC12/STC
Finish
For ARF Series Spotlights
connector
SCC12/SP
DRSWH
DISTANCE RINGS
ED2GO
Gold
ED2WH
White
For XR1 Xenon Spotlights
POWER & CONNECTING CABLES
Power Supply Cables
X-DIBL
Black
X-DICH
Chrome
X-DIGO
Gold
X-DISS
Stainless steel
X-DIWH
White
Connecting Cables
Unit # 3403024
Lgth.
In.
No.
HARDWIRE BOXES
Power Supply Cables
M432000
79
Connecting Cables
M460200
8
M460500
19
M46-1/500
20
M461000
39
M461500
59
M42-1/2000
79
M42-1/3000
118
M463000
119
188
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Controls 1 to 5 60-Watt or 1 to 2 120-Watt transformers. Pre-wired with 10-ft. cord, 12” 3-outlet female end
and 3-ft. touch wire with U-ring. 4 dimming levels; Off,
50%, 75% and 100%. 110V.
No.
ETD1
ETD1/TP
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Desc.
Touch dimmer
Touch dimmer w/ pad
For hard-wiring of SlimLite fixtures. Measures 3-5/8” L
x 2-1/4” W x 1-3/8” H.
No.
Desc.
SHWC/XL
SWHC/S/XL
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Hardwire box
Hardwire box w/ switch
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Power Supplies, Track Lighting Components & Switches
Unit # 3403074
POWER TRACK COMPONENTS
Sinks
FlexTrack
Unit # 3403039
Edgebanding
& Veneers
LIGHT HOUSING ACCESSORIES
HighLite
Desc.
HLC
ES430W
Adhesives
& Caulk
19-5/8” Mounting stems
Connecting element
HLE
End piece
Wall mounting plate
Decorative
Hardware
HLWMP
Power Supplies, Track Lighting Components & Switches
ES103W & ES105W
ES900W
ES200W
ES210W & ES220W
Unit # 3403089
LED POWER SUPPLIES
For maximum of (9) 1W LEDs. Features overload,
overheat and short-circuit protection, and
attached terminal block for 3 LED spotlights.
110V, 50/60Hz. 350mA constant current. Includes
79” plug-in power cord.
No. PSLED/A/LINE. Can be used with Flex-LED
Edenroc or side mount lights.
Power Supplies
No.
Accessories
No.
Desc.
TBLED/A
Terminal block for PSLED/A
TBLED/B
Terminal block for PSLED/A
Unit # 3403026
POWER SUPPLY CABLES
For incorporating electrical power into retail displays. White.
No.
Desc.
ES444W
Corded starter w/ track, 5-ft. length
ES430W
KO feeder starter for surface mount electrical boxes
ES103W
Track section, 3-ft. length, can be cut to size
ES105W
Track section, 5-ft. length, can be cut to size
ES105LW
Snap-on track cover, 5-ft. length, can be cut to size
ES900W
End cap; shields embedded wires at open end of final track section
ES200W
Standard 3-outlet receptacle, 15A; snaps anywhere on track
ES210W
Captive 3-outlet receptacle, 15A; slides anywhere on track
ES220W
Captive 3-outlet receptacle, 20A; slides anywhere on track
ES510W
Straight connector, 14-1/4” L x 1-5/8” H x 5/8” D;
allows track to bridge up to 2.5” obstacle
ES580W
Flexible connector, 14-1/4” L x 1-5/8” H x 5/8” D;
allows track to bridge up to 2.5” obstacle
White.
No.
Lgth.
In.
Desc.
SlimLite XL
SPC6/XL
Power cord
6
SPC12/XL
Power cord
12
Power cord w/ straight connector
15
SPC18/SP
Power cord w/ 90° connector
18
SPC24/XL
Power cord
24
24
Shelving
& Hardware
Power supply for Eco-LED
Screws &
Fasteners
PLSED/ECO
ES510W & ES580W
Constant current driver, switch
compatible
Wood
Products
PSLED/A/LINE
Desc.
Constant current driver
Lighting
PSLED/A
High-Power
Unit # 3403029
SPC24/STC
SPC36SP
SPC48STC
SPC/XL
SPC/S/XL
On/Off – SlimLite
36
48
Power cord
72
Power cord with roller switch
72
Requires SDC/XL direct connector for connection to fixture.
No.
72
SRS/XL
SPC/XL/CD
Power cord w/ conduit cover
SPC72SP
72
SPC72/STC
72
SPC120/XL
Power cord
HighLite
120
Power cord
72
SPC/HL
ROCKER SWITCHES
Cabinet Locks
& Latches
SPC15/STC
Storage &
Convenience
HLMS19
ES444W
Desc.
On/off rocker switch
189
Abrasives
11-7/8” Mounting stems
& Machines
No.
HLMS11
Dimmers, Spacer Rings, Switches & Transformers
Unit # 3403018
Unit # 3403057
SWITCHES
TRANSFORMERS
Surface Mounted
Unit # 3403052
ROTARY DIMMERS
Surface Mounted
UC-60FT
Recess Mounted
Inner ring and button in white.
Controls up to (5) 60W or up to (2) 120W transformers. Provides linear dimming from 0 to 100%. 110V.
Pre-wired with 10-ft. cord and 12” 3-outlet female end.
Includes dimmer knob.
No.
ERD1BL
No.
Finish
Surface Mounted – For Use With AH11
SAHBL
Black
SAHCH
Chrome
Color
SAHGO
Gold
Black
SAHWH
White
Recess Mounted – For Use With EH11
ERD1WH
White
Dimmers, Spacer Rings, Switches & Transformers
Unit # 3403071
SPACER RINGS
Semi-recessed design reduces recess depth.
D11 & DR13 Series. Reduces from 5/8” to 1/2”.
R12 Series. Reduces from 3/4” to 1/2”.
No.
Finish
For Use with AH11 & EH11 Series Spotlights
D11BL
Black
D11CH
Chrome
D11GO
Gold
D11WH
White
For Use With KB12 Series Spotlights
R12BL
Black
R12CH
Chrome
R12GO
Gold
R12SS
Stainless steel
UE-E60FT
SEHBL
Black
SEHCH
Chrome
SEHGO
Gold
SEHWH
White
Unit # 3403069
SWITCHES
Door Contact
UK-120TW
No.
Color
DCS
White
Unit # 3403028
SWITCH RIGS
No.
Finish
SRIG1
White
Unit # 3403016
TERMINAL BLOCKS
R12WH
White
For Use With ARF Series Spotlights
DR13BL
Black
DR13CH
Chrome
DR13GO
Gold
DR13SS
Stainless steel
DR13WH
White
Protects against short-circuits, overloads and overheating. Provides soft start for maximum lamp life.
Features auto-reset technology; no fuses required.
Compatible with standard dimmers. 60VA. Includes 10”
12V connector with NVK6/3 plug-in terminal and 79”
power cord.
No. UC-60FT. Ultra-slim design. Features built-in
radio frequency interference suppressor.
No. UE-E60FT. Compact design featuring SMD technology.
No. UK-120TW. Features built-in radio frequency
interference suppressor. Includes two 10” 12V connectors. Meets UL Class II requirements.
Ht.
Body
No.
In.
Lgth. In.
UC-60FT
9/16
6-5/8
UE-E60FT
13/16
4-3/4
UK-120TW
13/16
3-3/4
Unit # 3403031
WIRE MANAGEMENT
COMPONENTS
Unit # 3403037
SPOTLIGHT LENSES
No.
No.
GLFR
Frosted glass lens for AH11/EH11 series
GLCL
Clear glass lens for AH11/EH11 series
GLSHFR
PGLFR
KBGLFR
No.
NVK64
Finish
Wire sleeve, 40” L
Chrome
Finish
WM40GO
Gold
White
WM40WH
White
Frosted glass shade for BL1/A
Glass lens for CBS & ARF series
Frosted glass lens for KH12 series
GL2CL
Clear glass lens for Archtech AL
X-GLFR
Frosted glass lens for XR1
EGLFR
Frosted glass lens for ES1/3 & ER1/3
EGLCL
Clear glass lens for ES1/3 & ER1/3
EGL2CL
Clear glass lens for ES2/4 & ER2/4
190
Desc.
WM40CH
Four sockets. For use when connecting 3 to 6 10W
halogen spotlights to single transformer.
Desc.
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Unit # 3403079
TOP CAPS
For plugging top of hole drilled through board.
Hole
No.
Size
Color
K63WH
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
2-1/8” (55mm)
WMCOWH
Coupling
White
WMIEWH
Inside elbow
White
WMOEWH
Outside elbow
White
WMFEWH
Flat elbow
White
White
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 4031044
Magnetic
Steel
Adhesives
& Caulk
Edgebanding
& Veneers
BULLET CATCHES
Finish
C713BN
Brown
C713BK
Black
Unit # 4031043
CATCHES
Magnetic
KNA-903BRDIP & KNA-905BRDIP
Dipped brass-look finish.
Nos. KNA-903BRDIP & -905BRDIP. Adjustable.
Strike
No.
Dia. In.
Catch Dim. In.
Dia. x L
KNA-901BRDIP
5/8
3/8 x 1/2
KNA-902BRDIP
5/8
21/64 x 3/8
KNA-903BRDIP
1-1/16
KNA-905BRDIP
1-1/4
Catches, Latches & Cabinet Security Systems
3/8 x 5/8
1/2 x 1-1/32
Shelving
& Hardware
Includes plate and screw.
No.
Decorative
Hardware
KNA-901BRDIP & KNA-902BRDIP
Unit # 3044160
C242AL
C241AL
Surfacing
Products
Unit # 1729215
CATCHES
Aluminum construction. Includes screws and plate.
No.
Desc.
Regular
C242AL
Heavy-duty
Screws &
Fasteners
C241AL
CABINET SECURITY SYSTEMS
Unit # 4031045
Rev-A-Lock®
TOUCH LATCHES
Cabinet Locks & Latches
Sinks
Catches, Latches & Cabinet Security Systems
C907BK
Single
Attaches to wood, glass, particleboard and metal cabinets from 1/2” to 1-9/16” thick.
Magnetic lock mechanism unlocks when key is held against cabinet door; can also
be disabled to allow unrestricted opening. Polymer construction.
Pkg.
No.
Desc.
Qty.
C927BK
Double
REV-RAL-101-1
Black. Includes screws and plate.
No.
Desc.
Starter set
5 Locks, 2 Keys
REV-RL-201-1
Lock assembly
25
REV-RL-202-1
Magnetic key
25
Unit # 4031012
CATCHES
Abrasives
Double Ball
Phone or FAX
your order today!!
Solid brass construction.
No.
C285SB
Size
In.
2
Cabinet Locks
& Latches
C927BK
191
& Machines
C907BK
Lighting
Wood
Products
Storage &
Convenience
Magnetic
Cam, Chest/Lid & Drawer Locks
Unit # 3344008
Unit # 3344009
CAM LOCKS
CAM LOCKS
Disc Tumbler
Disc Tumbler
For drawers, left-hand and right-hand doors with lipped/overlay or flush construction.
Locks with 90° turn; key is removable in locked and unlocked position. Can be
keyed with other disc tumbler locks using D8785 key blank. Includes two keys, trim
washer, spur washer, mounting nut and two cams.
Note: For overlay construction, combined thickness of front and frame must not
exceed cylinder length.
For drawers, left-hand and right-hand doors with lipped/overlay or flush construction.
For overlay construction, combined thickness of front and frame must not exceed
cylinder length. Locks with 90° or 180° cam turn. 1-3/4” cylinder length. Max. material thickness 1-7/16. Keyed alike. Includes two keys, trim washer, spur washer,
mounting nut, two cams and two stop washers.
Key
No.
Finish
Code
Cylinder
Lgth. In.
No.
Max. Material
Thick. In.
Keyed Alike
Finish
Key
Code
C8060C346A14A
Bright nickel
C346A
C8060C346A3
Bright brass
C346A
C8060C390A3
Cam, Chest/Lid & Drawer Locks
Bright brass
C390A
C8053C346A14A
1-3/16
7/8
Bright nickel
C346A
C8053C346A3
1-3/16
7/8
Bright brass
C346A
C8053C346A4G
1-3/16
7/8
Antique brass
C346A
C8053C390A14A
1-3/16
7/8
Bright nickel
C390A
CHEST/LID LOCKS
C8053C390A3
1-3/16
7/8
Bright brass
C390A
Surface Mount
C8053C413A14A
1-3/16
7/8
Bright nickel
C413A
C8053C415A14A
1-3/16
7/8
Bright nickel
C415A
C8053C420A14A
1-3/16
7/8
Bright nickel
C420A
C8053C642A14A
1-3/16
7/8
Bright nickel
C642A
C8055C346A14A
1-7/16
1-1/8
Bright nickel
C346A
C8055C346A3
1-7/16
1-1/8
Bright brass
C346A
C8055C390A3
1-7/16
1-1/8
Bright brass
C390A
C8055C413A14A
1-7/16
1-1/8
Bright nickel
C413A
C8055C415A3
1-7/16
1-1/8
Bright brass
C415A
C8055C420A14A
1-7/16
Bright nickel
C420A
C8053KD14A
1-3/16
7/8
Bright nickel
–
C8053KD3
1-3/16
7/8
Bright brass
–
C8053MKKD14A
1-3/16
7/8
Bright nickel
Master
C8055KD14A
1-7/16
1-1/8
Bright nickel
–
C8055KD3
1-7/16
1-1/8
Bright brass
–
C8055MKKD14A
1-7/16
1-1/8
Bright nickel
Master
1-1/8
Keyed Differently
Unit # 3344002
For use on cedar chests and other locking lid applications. Keyed alike; key is
removable in locked or unlocked position. Internal bolt. Safety feature requires pushbutton to be operated in order to lock lid. Requires 9/16” diameter hole for cylinder.
Antique brass finish. Includes key, strike and mounting screws.
Cylinder
No.
Lgth. In.
C8414KA4G
7/8
Unit # 1729220
DRAWER LOCKS
Unit # 3344007
CAM LOCKS
Disc Tumbler
For wood sliding doors. Plunger-style bolt. Requires 7/8” diameter hole in front door
for cylinder. Includes two keys, strike and mounting screws. Chrome.
Cylinder
Bolt
Key
No.
Lgth. In.
Travel In.
Code
C8043C346A14A
192
1
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
7/16
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
346A
Nickel plated steel construction. 3/8” bolt travel. Six tumbler design.
No.
For Material
Thick. In.
KNA-986NP
7/8
KNA-987NP
3/4
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3344010
Unit # 3344028
MASTER KEYS
Edgebanding
& Veneers
DRAWER LOCKS
Surfacing
Products
Sinks
Locks, Gate Latches & Keys
C8703C346A14A
Desc.
D8799
E41A
Unit # 3507001
Unit # 1729219
Surface mounted. 11/32” bolt travel, 15/16” cylinder length. Requires 7/8” diameter
hole for cylinder. Keyed alike; key removable in locked or unlocked position. Bright
nickel finish. Includes two keys and mounting screws.
Key
No.
Code
For master-keyed disc tumbler locks. Brass construction.
No.
C346A
C8704C413A14A
C413A
SLIDING DOOR LOCKS
Unit # 1729221
Decorative
Hardware
Adhesives
& Caulk
Deadbolt – Disc Tumbler
Plunger
No.
Finish
KNA-989SPRBR
Sprayed brass-look
KNA-989ALUM
Natural aluminum
For doors up to 1” thick. 15/32” plunger travel. 7/8” barrel diameter. 12 per pkg.
No.
Finish
KNA-984NP
Polished nickel
KNA-984BR
Dull brass
Storage &
Convenience
Cast aluminum construction. Interchangeable left or right hand mounting. Lock
measures 2” W x 2-3/8” L. 12 per box.
Unit # 334
Unit # 1729218
Unit # 3344001
SLIDING DOOR LOCKS
Ratchet
Wood
Products
FURNITURE LOCKS
Lighting
Deadbolt
C8826KA3
For use on furniture and cabinetry. Keyed alike; key is removable in locked or
unlocked position. Bright brass finish. Includes key and keyhole escutcheon.
No. C8207KA3. Requires hole 11/32” x depth of lock. Includes strike.
No. C8826KA3. Requires hole for key entry.
C8207KA3
RH door/drawer; full mortise
3/16
C8826KA3
Door/drawer; surface mount
21/64
KNA-963CHR
For 1/4” thick sliding glass doors. Individually boxed; 12 per carton.
No.
KNA-965NP
KNA-963CHR
Locks, Gate Latches & Keys
Lgth.
In.
Finish
1 to 3-3/8
Nickel
3/4 to 3-3/8
Chrome
NOTES
193
Abrasives
Bolt
Travel In.
Desc.
& Machines
C8207KA3
Cabinet Locks
& Latches
KNA-965NP
No.
Screws &
Fasteners
Shelving
& Hardware
GATE LATCHES
194
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
180
ABRASIVE DISCS
23388-80
D
80
23614-220
C
220
Grip-Backed – Abralon™
23388-120
D
120
23614-320
C
320
23388-180
C
180
23614-400
23388-220
C
220
23388-240
C
240
23615-60
D
320
23615-80
D
80
23615-100
D
100
60
23321-80
D
80
23615-120
D
120
Grit
23321-100
D
100
23615-150
D
150
8A241-180
180
23321-120
C
120
23615-180
C
180
8A241-360
360
23321-150
C
150
23615-220
C
220
8A241-500
500
23321-180
C
180
23615-320
C
320
8A241-1000
1000
23321-220
D
220
23615-400
8A241-2000
2000
23321-320
C
320
8A241-4000
Abrasive Discs & Pads
4000
23321-400
No.
D
23624-80
D
80
23320-80
D
80
23624-100
D
100
23320-100
D
100
23624-120
D
120
23320-120
C
120
23624-150
D
150
23320-150
C
150
23624-180
C
180
23320-180
C
180
23624-220
C
220
23320-220
C
220
23624-320
C
320
23320-320
Grit
C
6” Dia. – No Holes – Autobox
320
Unit # 3634002
ABRASIVE PADS
9A241-80
80
23379-80
D
80
9A241-120
120
Goldflex
23379-100
D
100
9A241-150
150
23379-120
D
120
9A241-180
180
23379-150
D
150
9A241-220
220
23379-180
C
180
9A241-240
240
23379-220
C
220
Soft, flexible design. Features aluminum oxide abrasive resin-bonded to A-wt. backing. Semi-open coat
design produces consistent scratch pattern; stearate
coating reduces loading and clogging. Measures 4-1/2”
x 5-1/2”. 200 per pkg.
No.
Grit
9A241-320
320
23379-2840
C
280
B
320
9A241-400
400
23379-320
23145-150
ABRASIVE DISCS
PSA-Backed – Hiolit J
Grip-Backed – Bulldog Gold
PSA-Backed – Bulldog Gold
Grit
For sanding applications
requiring flexible, tear resistant performance. Features
aluminum oxide abrasive
resin-bonded to J-wt. cloth
backing. Closed coat construction.
5”
diameter.
Maroon.
No.
Grit
For finishing and
heavy
stock
removal. Features
aluminum
oxide
abrasive
resinbonded to backing.
Semi-open
coat design produces consistent
scratch
pattern;
stearate coating
reduces
loading
and clogging. 50
per pkg.
For finishing and
heavy
stock
removal. Features
aluminum
oxide
abrasive
resinbonded to backing.
Semi-open
coat
design
produces
consistent scratch
pattern;
stearate
coating
reduces
loading and clogging. 100 per pkg.
Backing
Wt.
5” Dia. – No Holes
No.
Backing
Wt.
5” Dia. – No Holes
Grit
D
60
23612-100
D
100
23332-80
D
80
23612-120
D
120
23332-100
D
100
23612-150
D
150
23332-120
D
120
23612-220
23332-150
D
150
23332-180
C
180
B
5” Dia. – Vacuum – 5 Holes
D
56332-80
80
56332-100
100
56332-120
120
56332-150
150
Unit # 3634014
23332-60
23614-60
240
Unit # 3634015
ABRASIVE DISCS
Unit # 3634003
ABRASIVE DISCS
150
23145-240
Unit # 3634011
No.
SCUFF PADS
Series 18 – Mirlon
220
For use in fine finishing and
surface preparation applications. Features aluminum
oxide and silicon carbide
abrasive with phenolic resin
bonding. Measures 6” x 9”.
No.
Grit
Color
18111-447
Very
fine
Maroon
18111-448
Ultra
fine
Gray
60
23332-220
C
220
23614-80
D
80
23332-240
C
240
23614-100
D
100
23332-320
C
320
23614-120
D
120
23332-400
C
400
23614-150
D
150
Surfacing
Products
60
195
For use in vacuum-assisted
sanding applications. Mesh
construction allows efficient
dust removal and eliminates
clogging, loading and pilling.
6” diameter. 50 per pkg.
23624-60
Shelving
& Hardware
ABRASIVE DISCS
Grip-Backed – Abranet™
400
400
Screws &
Fasteners
Unit # 3634008
C
C
Storage &
Convenience
No.
Wood
Products
C
400
Lighting
23388-320
C
Cabinet Locks
& Latches
For use on corners, edges
and contours. Open-cell
design
holds
large
amounts of water or solvent; fabric face has
openings to allow free
flow. Foam core provides
even surface pressure. 6”
diameter. 20 per pkg.
Sinks
C
Edgebanding
& Veneers
Grit
23614-180
Adhesives
& Caulk
Backing
Wt.
No.
Grit
Abrasives
Abrasives
Unit # 3634006
Backing
Wt.
5” Dia. – No Holes – Autobox
& Machines
No.
Decorative
Hardware
Abrasive Discs & Pads
Abrasive Discs & Rolls, Backup Pads & Finishing Sheets
Backing
Wt.
Grit
6” Dia. – Grip-Backed
No.
Unit # 3634018
Pkg.
Qty.
Unit # 3634020
FINISHING SHEETS
Carat
ABRASIVE DISCS
25622-120
D
120
50
Q-Silver
25622-150
D
150
50
25622-180
C
180
50
25622-220
B
220
50
6” Dia. – Grip-Backed – Vacuum – 6 Holes
Features aluminum oxide abrasive resin-bonded to
paper backing. Tight grain distribution provides consistent scratch pattern; stearate coating allows use in
applications where loading is a factor. 5” diameter.
Backing
Wt.
No.
25624-120
D
120
100
25624-150
D
150
100
25624-180
C
180
100
25624-220
B
220
100
For dry sanding applications. Features aluminum oxide
abrasive resin-over-glue bonded to paper backing.
Stearate coating reduces loading and clogging. Measures 9” x 11”.
Backing
No.
Wt.
Grit
Unit # 3634019
BACKUP PADS
Grit
PSA-Backed
2B332-80
D
80
2B332-150
C
150
2B332-180
C
180
2B332-320
C
Grip-Backed
320
2B612-120
C
120
2B612-150
C
150
2B612-180
C
180
2B612-220
C
220
105 PAD & 106 PAD
D
80
17101-100
B
100
17101-120
B
120
17101-150
B
150
17101-180
B
180
17101-220
B
220
17101-240
B
240
17101-320
B
320
17101-400
B
400
105HP
Unit # 3634017
ABRASIVE ROLLS
PSA-Backed – Carat – Autokut
2B612-400
C
400
Sheets Discs & Rolls, Backup Pads & Finishing
Abrasive
For dry sanding applications. Features aluminum oxide
abrasive resin-bonded to paper backing. Stearate coating minimizes loading and clogging. 4-1/2” x 10yd. roll.
White.
Backing
No.
Wt.
Grit
105GVPC
105GVBD
Unit # 3634016
ABRASIVE DISCS
No.
Royal
17101-80
Desc.
Vinyl Faced
17573-80
D
80
Dia.
In.
17573-100
B
100
17573-120
B
120
B
150
105 PAD
For PSA discs, 5/16”-24 thread
5
17573-150
106 PAD
For PSA discs, 5/16”-24 thread
6
17573-180
B
180
Hand pad w/ strap
Grip Faced
5
17573-220
B
220
17573-320
B
320
105GGJP
Job pack, 5/16”-24 thread
5
105GVBD
Multi-hole for electric tools
5
105GVPC
Multi-hole for electric tools
5
5/16”-24 thread
6
105HP
Unit # 3634013
For finishing applications. Features aluminum oxide
abrasive resin-bonded to paper backing. Progressive
Bond™ technology and stearate coating provide durability, flexibility and load resistance.
No.
Backing
Wt.
Grit
5” Dia. – Grip-Backed
Pkg.
Qty.
25612-100
D
100
50
25612-120
D
120
50
25612-150
D
150
50
25612-180
C
180
50
25612-220
B
220
50
25612-600
B
600
5” Dia. – PSA-Backed – Linkrol
50
25314-80
D
80
100
25314-120
D
120
100
25314-150
D
150
100
25314-180
C
180
100
25314-220
B
220
100
25314-320
B
320
100
25314-400
B
400
100
196
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
106GG
ABRASIVE SPONGES
Need help with
specifications?
will be happy to
assist you!
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
For wet or dry use on contoured surfaces.
Dim. In.
No.
W x L x Thick.
Single Sided
Grit
1354-F
4.50 x 5.50 x 0.25
Fine
1354-M
4.50 x 5.50 x 0.25
Double Sided
Medium
1350-100
3.75 x 4.75 x 0.50
100
1350-150
3.75 x 4.75 x 0.50
150
1350-220
3.75 x 4.75 x 0.50
Four Sided
220
1352-F
2.75 x 3.94 x 1.00
Fine
1352-M
2.75 x 3.94 x 1.00
Medium
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasive Belts
Contact your ISC Surfaces representative for complete information!
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Unit # 3634021
Sinks
ABRASIVE BELTS
197
& Machines
Surfacing
Products
Abrasive Belts
Cloth – Wide
Abrasive Belts
Unit # 3634022
ABRASIVE BELTS
Paper – Wide
198
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Unit # 3634023
Sinks
ABRASIVE BELTS
199
& Machines
Surfacing
Products
Abrasive Belts
Non-Standard
NOTES
200
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3562075
AMA-203201
20
AMA-203251
25
145
8
AMA-203261
26
146
Ball Bearing Guides, Boring Bits & Circular Saw Blades
12
AMA-203301
30
AMA-203351
35
AMA-203401
40
Unit # 3562024
Edgebanding
& Veneers
Dia.
mm
Adhesives
& Caulk
No.
Decorative
Hardware
For application of silicone, acrylic, water-based or latex sealants or colorants; tip can
be used to seal carpet edges prior to seaming. Plastic construction with printed
instructions. Includes applicator nozzle and snap-on storage cap.
Size
No.
Oz.
For use with boring machines and drill presses. Features two wings
with spurs. Right hand cutting. 10mm shank diameter. 57mm
OAL.
Unit Unit # 3562077
CIRCULAR SAW BLADES
Steel
Cut-Off & Crosscut
Double steel-shielded for increased rigidity. High-performance, high-temperature
grease inhibits dust and extends life of bearing. 1/2” outer diameter.
Dim. In.
No.
d
B
For Use With
AMA-47700
1/8
11/64
Old style 1/2” diameter flush trim bits
AMA-47706
3/16
3/16
1/2” dia. flush trim, bevel trim, corner rounds,
raised panel, rabbet, ovolo and form bits
BALL BEARING GUIDES
Features 10° hook angle, .126” kerf and 5/8” bore dia.
Dia.
No.
In.
Alternate Top Bevel Grind
AMA-610600
10
Triple Chip Grind
Unit Unit # 3562147
BALL BEARING GUIDES
No.
Teeth
AMA-610801
60
10
80
Shelving
& Hardware
APPLICATOR BOTTLES
Screws &
Fasteners
Tools, Safety & Machines
HINGE BORING BITS
UNIT # 3897008
Surfacing
Products
Sinks
Ball Bearing Guides, Boring Bits & Circular Saw Blades
Storage &
Convenience
Ultra-Glide™
Unit Unit # 3562088
CIRCULAR SAW BLADES
Wood
Products
Melamine & Laminate
Nos. 57156 through 57168 bowl bits
For smooth, chip-free cutting with table saws. Features 25° high alternate top bevel
grind teeth with 6° negative hook angle. .126” kerf.
Dia.
No.
Bore
No.
In.
Teeth
Dia. In.
Brad Point
10mm x 27mm shank. 57mm OAL.
Desc.
Bit
Dia. mm
AMA-201005
Right hand
5
AMA-301005
Left hand
5
AMA-201008
Right hand
8
AMA-301008
Left hand
8
AMA-201010
Right hand
10
AMA-301010
Left hand
10
No.
AMA-MB10800
10
80
5/8
Abrasives
Unit # 3562074
BORING BITS
Cabinet Locks
& Latches
New style 57122 and other solid-surface type bits
AMA-47731
201
& Machines
AMA-47726
Lighting
For use on solid surface materials, acrylics and plastic laminates. Not recommended for wood. Features smooth Delrin® sleeves that will not leave marks on
material. 1/4” inside dia., 7/8” outside dia., 10° taper. Includes Teflon® dust shield for
better seal and longer life.
No.
Application
Brushes, Drill Bits, Caulking Guns & Knives
Unit # 3611025
ADHESIVE GUNS
Unit # 3897029
Unit # 3748051
CONTACT CEMENT BRUSHES
STEP DRILL BITS
For applying contact cement to metal
trims, countertops or tackless strips.
Features white bristles with flat trim
and sanded wood handle.
Width
No.
In.
Confirmat
1412-1
1
No.
Size
mm
Lgth.
In.
1412-2
2
12793
5, 7, 10
5-3/4
1412-3
3
Provides 10:1 mix ratio during application of adhesive.
No.
Desc.
ADHESIVEGUN
Unit # 3403088
1412-4
4
Knives Drill Bits, Caulking Guns &
Brushes,
Adhesive gun
Unit # 3403019
Unit # 3897011
DUSTER BRUSHES
Horsehair
DRILL BITS
HOLE SAWS
Dia.
In.
No.
For final cleaning applications. Features lightweight
beavertail wood block and 100% black horsehair fill.
OAL
Trim
No.
In.
Depth In.
2618
12-1/2
DRILL 10
3/8
Hole Saws
Unit # 3897007
Dia.
In.
No.
2-1/2
SAW45
Unit # 3468209
CAULKING GUNS
1-3/4
SAW55
2-1/8
SAW68
2-11/16
Accessories
DRILL BITS
No.
Desc.
SAW HOLDER
Hole saw arbor
Unit # 3897015
101
JUL-DB-10X2MM
JUL-DB10
WARD KNIVES
105
JUL-DB-2.5
JUL-T10810MM
No.
Size
mm
Desc.
101
1/10 Gal.
JUL-DB-10X2MM
10
Chuck w/ wrench
105
1 Qt.
JUL-DB-2MM
2
Left handed
10
Right handed
JUL-DB2.5
2.5
Right handed
JUL-DB5
5
Right handed
JUL-DB6
6
Right handed
JUL-T10810MML
10
Left handed w/ countersink
JUL-T10810MMR
10
Right handed w/ countersink
2.85
#5 HHS centering bit;
1/8” dia.
202
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
No.
Desc.
5
Ward knife
Unit # 3897010
JUL-DB10
JUL-VPB5
Adjustable blade allows
changes in cutting depth or
angle. Hardwood handle.
Includes No. 12-WB blade.
Features smooth rod design with slotted front cap to
prevent cartridge shifting and thumb release to shut off
adhesive flow. Welded steel construction. 10:1 thrust
ratio.
No. 105. Features spout cutter and seal puncture rod.
Cartridge
No.
Size
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
UTILITY KNIFE BLADES
26AB
25AB
No.
For Use
With
Desc.
25AB Straight
26AB
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Hook
No. 6 airway knife
No. 6 airway knife or No. 5 ward knife
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Laminate Edgers, Files & Rollers
Unit # 3897024
Unit # 3897023
LAMINATE ROLLERS
Flat – Magicut
Pressure
Sinks
LAMINATE FILES
Unit # 3897017
LAMINATE EDGERS
Lgth.
In.
No.
Desc.
688
V300
Roller
Dia. In.
OAL
In.
1-1/2
14-3/4
Unit # 3897032
Laminate edger
Accessories
No.
Desc.
688RB
Replacement blade
Laminate Edgers, Files & Rollers
For edge finishing on plastic laminates. Tooth design
provides extra-smooth finish.
Lgth.
No.
In.
8354
HAND ROLLERS
Airway
6
Unit # 3897019
LAMINATE FILES
Features tooth design and sharpening pattern optimized for use with plastic laminates.
Flat. Provides fast stock removal. Chip-breaker groove
produces smooth edge.
Mill. For finish filing applications.
8497
8
8642
10
8737
12
8832
14
Unit # 3897030
FILE BRUSHES
Lgth.
In.
222AR
Flat
EXTENSION HANDLE ROLLERS
Features wire card clothing for coarse teeth and white
tampico fiber for fine teeth.
14
Mill
GLC10M
10
GLC12M
12
GLC14M
OAL
In.
No.
21467
10
Unit # 3897031
14
FILE HANDLES
Unit # 3897020
LAMINATE FILES
Combination – Handy File
Features one side for fast stock removal, one side for
fine finishing, and “safe edge” for corner applications.
Lgth.
No.
In.
HF8
8
HF10
10
Airway
For use on countertops,
walls and resilient flooring.
No axle projections; can
be used for flush work into
corners without scratching. Features hard rubber
roller sections, cast aluminum frame, and nickelplated handle with twistlock length adjustment.
For installation on file tang. Features metal ferrule.
For File
No.
Size In.
No.
Roller Dim. In.
Dia. x L
Handle
Lgth. In.
1-1/2 x 7-1/2*
17 to 27
21476
12 & 14
333AR
21485
10 & 12
* Combined length of all sections.
Unit # 3897022
21494
8 & 10
Unit # 3897004
LAMINATE ROLLERS
LAMINATE ROLLERS
Squeeze
J-Style
Unit # 3897021
Provides 30 to 40
PSI pressure for
positive bonding of
plastic laminates.
Features
1-1/2”
dia. x 3” W nonmarking
rubber
roller, 1/2” dia. aluminum alloy handle, and vinyl grips.
12-1/2” OAL.
LAMINATE FILES
Mill
provides smooth finish with reduced clogging.
Lgth.
No.
In.
LM10
Screws &
Fasteners
12
Storage &
Convenience
10
Cabinet Locks
& Latches
GLC10F
GLC12F
GLC14F
5
Unit # 3897035
10
LM12
12
No.
Color
LM14
14
J200B
Black
J200W
White
Abrasives
No.
For wall, countertop and stair tread applications; cast
aluminum handle can be used for coving and corner fitting.
Lgth.
No.
In.
Decorative
Hardware
No.
Mill Bastard – Nicholson®
Shelving
& Hardware
LAMINATE FILES
Provides 40+ PSI pressure for heavy-duty plastic laminate rolling applications. Features 3” W non-marking
black rubber roller, 1/2” dia. steel handle, and ribbed
vinyl grips.
Wood
Products
No.
14
Unit # 3897025
Lighting
Laminate Edgers
12
7965
Adhesives
& Caulk
10
7941
Prevents bonding problems in plastic laminate countertop edges without need for clamping or pounding. Features 11/16” long bottom roller and 1-7/16” long top
roller constructed of non-marring black plastic.
Roller
OAL
No.
Dia. In.
In.
S202
1-1/4
12-1/4
203
& Machines
7917
For finishing plastic laminate edges. Features solid
carbide blade with adjustable angle, and molded nylon
body.
Edgebanding
& Veneers
provides fast cutting with reduced clogging and smooth
finish.
Mica-Nife
Laminate Cutting Tools, Levels, Roller Frames & Covers
Unit # 3897018
Unit # 3897016
LAMINATE SLITTERS
MOULDING LIFTERS
Tridon
Unit # 3897036
LAMINATE SCORING CUTTERS
For cutting plastic laminate strips. Features opposing
circular steel blades mounted on roller bearings. Topmounted knob allows adjustment for varying sheet
thicknesses; cuts plastic laminate up to .062” and other
plastics up to .080”.
57ML
Laminate Slitters
For scoring plastic laminates and cement-based tile
backer board, and for degrouting applications. Features double-edged carbide-tipped blade to score
through decorative surface, allowing laminate to break
cleanly.
No.
344
Scoring Cutters
Desc.
No.
AT-109
Unit # 3897033
1/2 to 4-5/16
ROLLER FRAMES
Accessories
Desc.
AT-109020
Replacement cutting blades, pair
Accessories
No.
10-1/2
Material
Width In.
No.
Laminate scoring cutter & degrouting tool
Provides leverage and control by lifting moulding at
same angle at which nails were driven; prevents denting of baseboard. Both ends notched for brad and nail
pulling. Hardened tool steel construction with nickel finish.
Lgth.
No.
In.
Unit # 3897009
Desc.
LAMINATE TRIMMERS
344B
Replacement blade
Laminate Cutting Tools, Levels, Roller Frames & Covers
Unit # 3897027
LAMINATE SHEARS
For trimming and beveling straight or curved plastic
laminate panels. Features dual triangular steel blades,
edge-breaking front groove, and embossed angle line.
For Material
No.
Width In.
2005
For spreading adhesive in plastic laminate installation.
Plated metal construction; resists bending from normal
pressure.
Width
No.
In.
3F
3
7F
7
9F
9
1/4 to 1-13/16
Unit # 3897034
Unit # 3897005
For straight cuts in all types of plastic laminate. Features hardened steel double-action blades, springreturn handles with lock, and vinyl grips.
Cut
Kerf
No.
Lgth. In.
In.
11-LS
1-7/16
9/64
Unit # 3897028
LAMINATE SHEARS
Universal
ROLLER COVERS
LEVELS
Master Professional
Features mahogany construction with aluminum
I-beam and working edges, clear Pyrex vials with protective glass windows, shock absorbing endcaps, and
two hand holes.
No.
Vials
Dim. In.
LxWxH
MP48
(4) Plumb, (2) level
48 x 1-1/16 x 2-1/4
For spreading adhesive in plastic laminate installation.
Features nylon fabric exterior with resin-impregnated
core to resist deterioration from cements and cleaning
solvents.
No.
Width
In.
33C
3
77C
7
99C
9
Unit # 3897002
LEVELS
For straight, angle or curve cuts in all types of plastic
laminate. Features hardened steel blades, compound
leverage design, spring-return handles with lock, and
vinyl grips.
Cut
Lgth. In.
Kerf
In.
12-LS
9/16
11/32
204
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
No.
Features mahogany construction with double-angle
brass bindings on each working edge, clear Pyrex vials
with protective glass windows, shock absorbing endcaps, and two hand holes.
Dim. In.
No.
Vials
LxWxH
BB48
(4) Plumb, (2) level
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
48 x 1-1/16 x 2-1/4
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
we carry are listed
in this catalog.
please contact
your local branch
for assistance.
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit Unit # 3562012
Surfacing
Products
Router Bits
Unit Unit # 3562017
Unit Unit # 3562020
ROUTER BITS
Flush Trim – V-Groove
Two flute design. For template and pattern cutting on
top of workpiece. Ball bearing guide rides against template for exact duplication.
Dia.
Flute
OAL
Shank
No.
In.
Lgth. In.
In.
Dia. In.
Two-flute design with ball bearing guide. Double application in one pass. 5/8” diameter; 1” flute length.
Shank
OAL
No.
Dia. In.
In.
Sinks
ROUTER BITS
Flush Trim
ROUTER BITS
2-1/2
1/4
Shank
Dia. In.
OAL
In.
AMA-45465
3/4
1-3/4
3-3/4
1/2
AMA-45467
1
1-3/4
3-3/4
1/2
1/4
2-5/8
AMA-45468
1-1/8
1-1/2
3-1/2
1/2
AMA-47160
1/2
3
Unit Unit # 3562021
ROUTER BITS
Overhang Trim
Unit Unit # 3562019
Unit Unit # 3562018
ROUTER BITS
ROUTER BITS
Flush Trim
No-File™
Two-flute design with ball bearing guide. For use in
preliminary laminate trimming. 1/2” flute length; 2”
overall length. 1/4” shank diameter.
Dia.
Overhang
No.
In.
In.
AMA-47124
1-1/2
3-7/8
AMA-47126
2
4-1/4
Two-flute design with ball bearing guide. Provides
smooth cuts on laminates without hand filing. Flush
trims and breaks sharp edges in one pass. 1/2” diameter; 3/8” flute length.
OAL
In.
Radius
In.
Shank
Dia. In.
AMA-47150
1-7/8
.059
1/4
AMA-47152
2-1/8
.059
1/2
AMA-47154
1-7/8
.015
1/4
No.
AMA-47190
3/8
1/8
Unit Unit # 3562005
Storage &
Convenience
Two-flute design. Extra long with ball bearing guide.
1/2” bit diameter, 1/2” shank diameter.
Flute
OAL
No.
Lgth. In.
In.
ROUTER BITS
Straight
Wood
Products
Unit Unit # 3562016
ROUTER BITS
Flush Trim
Decorative
Hardware
1
AMA-47105
Router Bits
1/2
Shelving
& Hardware
No.
AMA-45460
Screws &
Fasteners
Two flute design with ball bearing guide. Flush cutting.
For use with difficult materials like melamine. Not for
use with router tables. 1” flute length; 1/2” diameter.
Adhesives
& Caulk
Edgebanding
& Veneers
Laminate – Dynabit™
Unit Unit # 3562035
ROUTER BITS
AMA-47090
1/4
1/2
2-1/4
AMA-47092
1/4
1
2-1/2
AMA-47100
3/8
1
2-5/8
AMA-47102
3/8
1/2
2-1/8
AMA-47104
1/2
1
2-5/8
Flute
Lgth. In.
AMA-45408
1/4
3/4
2-1/2
AMA-45414
3/8
1
2-3/4
AMA-45422
1/2
1-1/2
3-1/8
AMA-45427
1/2
2
4-1/2
Single flute, solid carbide design. 1-1/2” OAL, 1/4” flute
length, 1/4” shank diameter.
Cut
No.
Type
AMA-51200
Flush
AMA-51202
7°
OAL
In.
205
Cabinet Locks
& Latches
Dia.
In.
Abrasives
Two flute design with ball bearing guide. 1/4” shank
diameter.
Dia.
Flute
OAL
No.
In.
Lgth. In.
In.
No.
& Machines
Two flute design allows for greater balance and fine finish. 1/2” shank.
Lighting
Panel Pilot
Router Bits
Unit Unit # 3562032
Unit Unit # 3562046
ROUTER BITS
ROUTER BITS
Beading
Classical Cove & Bead
Unit # 3562003
ROUTER BITS
Two-flute design with ball bearing
guide. Produces quarter-round shape
bounded by fillets or bead. 1/4” shank
diameter.
Rad.
In.
Dia.
In.
OAL
In.
Flute
Lgth. In.
AT49604
1/4
1
2
1/2
AT49616
1/2
1-1/2
2-1/4
3/4
No.
Ball bearing guide.
Dia. No.
Flute
No.
In. Flutes Lgth. In.
Straight Plunge
AMA-45210 1/4
2
AMA-45211 1/4
1
OAL
In.
Shank
Dia. In.
Unit Unit # 3562022
ROUTER BITS
2-1/4
1/4
2
1
Flush Trim
2-7/8
1/4
AMA-47106 1/2
2
1/2
2-1/4
1/4
AMA-47108 1/2
2
1
3-1/4
1/2
No.
a°
Dia.
In.
Flute
Lgth. In.
AMA-47140 3/4
2
1
3-1/4
1/2
AMA-47200
15
5/8
9/32
AMA-47114 1/2
3
1
2-5/8
1/4
AMA-47204
45
1-3/32
1/4
Bevel Trim – 2 Flute
Ball bearing guide. 1-7/8” OAL, 1/4”
shank diameter.
Two-flute design with ball bearing guide. 1/2” shank
diameter.
No. AM-54135. Max. 18,000 RPM.
No.
Rad.
In.
Dia.
In.
OAL
In.
Flute
Lgth. In.
AMA-54292
3/16
1-1/2
2-1/2
5/8
AMA-54135
3/8
2
2-3/4
1
Unit Unit # 3562042
ROUTER BITS
Classical Bead & Cove
guide. 1/4” shank diameter. 1/2” flute
length.
Unit Unit # 3562028
ROUTER BITS
No.
Rad.
In.
Dia.
In.
OAL
In.
AMA-54102
13/64
1-1/4
2
Unit Unit # 3562072
ROUTER BITS
Rabbet
Bowl & Sink Trim
Unit Unit # 3562049
ROUTER BITS
Corner Beading
Two-flute design with ball bearing guide.
Dia.
Rabbet
OAL Shank
No.
In.
Depth In.
In. Dia. In.
Rabbet
AMA-49302 1-1/4
3/8
Multi-Rabbet
2-3/8
1/2
guide. Suitable for antique reproductions and restoration projects. 1/4”
shank diameter. 11/16” flute length.
Two-flute design with Ultra-Glide™ ball bearing guide.
3/4” overall diameter, 1/2” shank diameter.
No.
Desc.
Angle
Deg.
AMA-57153
1/16” Overhang
10
3-1/4
Flush Trim
0
3-1/2
AMA-49340 1-3/8
1/8, 5/16, 1/4,
3/8, 7/16,1/2
2
1/4
AMA-57154
AMA-49350 1-3/8
1/8, 5/16, 1/4,
3/8, 7/16,1/2
2-3/8
1/2
ROUTER BITS
OAL
In.
Unit Unit # 3562030
No.
Rad.
In.
Dia.
In.
OAL
In.
AMA-54164
3/16
1-1/8
2-1/4
Unit Unit # 3562031
ROUTER BITS
Corner Rounding
Chamfer
Unit Unit # 3562029
ROUTER BITS
Superabbet™
Rad. Dia.
Flute
OAL Shank
No.
In.
In. Lgth. In. In. Dia. In.
No. AMA-49404. Not for use in handheld routers.
Two-flute design with ball bearing guide. 7/8” flute
length. 1/2” shank diameter.
No.
AMA-49360
Dia.
In.
2
Rabbet
Depth In.
5/8 & 3/4
OAL
In.
3
a°
Dia.
Flute
OAL Shank
In. Lgth. In. In. Dia. In.
AMA-49400
45
1-1/4
1/2
2
1/4
AMA-49404*
45
2
3/4
2-1/2
1/2
AMA-49408
15
7/8
3/4
2-1/4
1/4
No.
* Max. material thickness 3/4”.
206
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
AMA-49496
1/8
3/4
3/8
2
1/4
AMA-49504
1/4
1
1/2
2
1/4
AMA-49506
1/4
1
1/2
2-7/16
1/2
AMA-49514
3/8
1-1/4
5/8
2-9/16
1/2
AMA-49518
1/2
1-1/2
3/4
2-5/8
1/2
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Router Bits
Unit Unit # 3562013
ROUTER BITS
Sinks
Core Box
Unit Unit # 3562070
ROUTER BITS
No.
Dia.
In.
AMA-45924
1
Flute
Lgth. In.
OAL
In.
5/8
1-3/4
Edgebanding
& Veneers
Two flute design. 1/4” shank diameter.
Corner Rounding
Adhesives
& Caulk
Unit Unit # 3562043
ROUTER BITS
Ogee Fillet
AMA-57150
5/16
1-1/8
1/2
1-7/8
1/4
AMA-57139
1/2
1-1/2
3/4
2-3/8
1/2
No.
AMA-54127
Unit Unit # 3562001
ROUTER BITS
Rad.
In.
Dia.
In.
OAL
In.
3/8
2-1/4
2-7/8
Decorative
Hardware
Shank
Dia. In.
Unit Unit # 3562026
ROUTER BITS
Corner Rounding
Roman Ogee
Two-flute design with ball bearing guide. 1/2” shank diameter.
Two-flute design with Ultra-Glide™ ball bearing guide. 1-5/8” overall diameter, 1/2”
shank diameter.
No.
Rad.
In.
Dia.
In.
OAL
In.
Flute
Lgth. In.
AMA-49202
5/32
1
2-1/2
5/8
No.
Rad.
In.
Flute
Lgth. In.
OAL
In.
ROUTER BITS
AMA-57190
1/2
3/4
2-3/4
Round Under
Screws &
Fasteners
Unit Unit # 3562071
Unit Unit # 3562069
ROUTER BITS
No.
Rad.
In.
Dia.
In.
Flute
Lgth. In.
AMA-57138
1/2
2-1/8
3/4
No.
Dia.
In.
Flute
Lgth. In.
OAL
In.
Material
Thick. In.
ROUTER BITS
AMA-57120
1
1-1/8
3-1/4
3/4
Undermount Bowl
OAL Material
In. Thick. In.
2-7/8
Wood
Products
Two-flute design with ball bearing for use in fabrication of kitchen and
vanity countertops. Allows cutting of “no-drip” edge in one pass. 1/2”
shank diameter.
Storage &
Convenience
Two-flute design with upper ball bearing guide. 1/2” shank
diameter. For use in table-mounted routers. Not for use in
handheld routers.
Countertop – “No-Drip”
OAL
In.
guide. Max. 18,000 RPM. 1/2” shank
diameter. 15/16” flute length.
Shelving
& Hardware
Two-flute design with Ultra-Glide™ ball bearing guide.
Rad.
Dia.
Flute
No.
In.
In.
Lgth. In.
1
Lighting
Unit Unit # 3562068
Unit Unit # 3562025
ROUTER BITS
Two-flute design with ball bearing guide. 1/4” shank diameter.
Rad.
Dia.
OAL
No.
In.
In.
In.
Flute
Lgth. In.
AMA-49104
1/4
7/8
2
9/16
AMA-49112
3/8
1-1/8
2
9/16
AMA-49116
1/2
1-3/8
2-1/4
3/4
Bevel
Material
Thick. In.
1/2
1/2
3/4
1/2 & 3/4
207
& Machines
Roundover
Two-flute design with Ultra-Glide™ ball bearing guide assembly.
Rad.
Dia.
Flute
OAL
No.
a°
In.
In.
Lgth. In.
In.
Roundover
AMA-57128
18
1/2
2-1/8
1
3
AMA-57158
14
1/2
2
11/16
2-1/2
AMA-57160
17
1/2
2-1/8
1
2-7/8
Bevel
AMA-57122
10
–
1
15/16
3
Abrasives
Cabinet Locks
& Latches
Cove
Bits, Hand Tools, Sealing Caps & Measuring Tools
Unit Unit # 3562038
ROUTER BITS
Unit # 3897013
Unit # 3897012
RUBBER MALLETS
Slot Cutter
STRAIGHT EDGES
Mortar Screed
Three-wing
design. 1-7/8”
overall diameter, 1/4” shank
diameter.
3/16
For carpet laying and ceramic tile setting applications.
Features 2-1/4” face diameter and contoured hardwood handle.
Head
Handle
Head
No.
Lgth. In.
Lgth. In.
Wt. Oz.
White – Non-Marking
1/4
3491W
3-1/8
3502W
3-3/4
11-1/8
Black – Economy
Groove
Width In.
No.
AMA-53408
AMA-53410
Unit Unit # 3562112
ROUTER BITS
T-Slot – Amerock®
10
For ceramic tile installation. Features heavy-duty rectangular aluminum design with plugged ends to prevent
mortar entry. Will not rust, warp or rot. Clear anodized
finish.
No. 30. Includes two-piece spring-loaded carrier to
facilitate insertion of straight edges after use and prevent sliding during transport.
12
Straight Edges
Lgth.
Ft.
20
No.
30-6
3491B
3-1/8
10
12
Bits, Hand Tools, Sealing Caps & Measuring Tools
Unit # 3468078
6
30-8
8
30-10
10
30-12
12
Straight Edge Sets
SCREWDRIVERS
No.
POZI
30
Produces slot for installation of Amerock hinges. For
use with table routers. 2” OAL, 21/32” flute length, 3/8”
shank dieameter. Not for use in handheld routers.
Dia.
No.
In.
AMA-48100
1-1/8
AMA-48102
1-19/32
Unit # 3897001
STRAIGHT EDGE RULES
JUL-POZIDRIVER
Ensures full torque is applied to adjustment screws.
No.
Desc.
JUL-POZIDRIVER
#2 POZI driver
Features 1/16” graduations on one edge, 1/8” graduations on the other. Reads from both ends. Aluminum
construction. Bend-resistant; lies flat.
Dim. In.
No.
L x W x Thick.
Unit Unit # 3562064
JUL-POZIBIT
ROUTER BITS
Desc.
Includes 2’, 3’, 4’, 4’10” and 6’ lengths
#2 x 1” POZI insert bit
Unit # 4033001
Tongue & Groove Assembly
ASE48
48 x 2 x 1/8
Unit # 3897003
SEALING CAPS
T-SQUARES
Multi-Purpose
Aluminum – Heavy-Duty
Two-wing design with 3/8” ball bearing guide. 1/2”
shank diameter. For use in table-mounted routers with
material 1/2” to 3/4” thick. Not for use in handheld routers.
No.
Dia.
In.
AMA-55400
1-5/8
Flute
Lgth. In.
OAL
In.
3/4
3
Unit # 3562002
INSERT KNIVES
Straight – Carbide
For capping tubes of glue, caulk, paint or sealant for
later re-use. Can also be used as Romex wire termination, pen cap or air tool inlet. Red.
Pkg.
No.
Qty.
For use on wood, chipboard and plywood.
No. Cutting Bevel
Dim. mm
No.
Edges
Deg. L x W x Thick.
AMA-RCK18
208
4
35
LRC50REDCAP
Features offset head riveted to blade. Head extends 6”
on one side of blade and 16” on other side; 1/8” graduations. Blade features 1/16” graduations. Reads from
both ends.
Dim. In.
L x W x Thick.
No.
Head
Blade
GS48HD
24 x 1-1/2 x 3/8
48 x 2 x 3/16
50
18 x 18 x 2
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
For boring 5mm holes for mounting plates mounted
with system screws, EXPANDO or INSERTA dowels.
Includes stop collar.
Note: 5mm drill bit must be purchased separately.
No.
Desc.
107-1/2
Unit# 3468176
BLUMOTION
PlateMate
Note: Usable length equals 2-1/2” less than OAL.
Unit # 3897014
FOLDING SQUARES
For use in installation of BLUMOTION 970A; bores left
and right sides of cabinet. Features 10mm drill bushing
for edge boring and 10mm stop collar.
No.
Desc.
JUL-655010
45-013
4’ x 2-1/2”
Unit #3468053
METABOX
5/8 to 1
Unit # 3468048
BORING TEMPLATES
INSERTA
Nos. JUL-ZML1500 & JUL-ZML1510. For marking
front fixing bracket locations on front of drawers. For
use with Series 320/330 M, K & H. Includes left and
right templates.
No. JUL-ZML80002. Includes non-handed templates
with adjustable rods.
Rotating cams provide 7
boring settings for hinge
cups. Can be used to
bore holes for 8mm dowels, 5mm system screws
or 2.5mm wood screws.
No.
BORING TEMPLATES
Mounting Plate
JUL-ZML1500
No.
Drawer front template for
Series 320/330 M, K, H
JUL-650590
2 to 8
JUL-ZML1510
Drawer front template for
Series 320N
Unit# 3468081
JUL-ZML80002
Gallery rod template
Unit # 3468207
JUL-655300
Mounting template
Measuring Tools, Boring & Assembly Templates
Surfacing
Products
Desc.
Boring
Dist. mm
BORING TEMPLATES
TANDEM
DRILLING TEMPLATES
For boring 6mm holes
for rear hooks and pilot
boring 2.5mm hole at
12° for locking device.
No.
JUL-T659000.
Includes 2.5mm drill bit
extension, 6mm stop
collar, screwdriver tip
and allen wrench.
No.
METABOX
Abrasives
For use with CLIP or MODUL wing or in-line mounting
plates in overlay applications. Allows location of screw
positions and transfer of measurements from door to
cabinet. Used to bore 2.5mm holes for wood screws.
No.
Desc.
Adhesives
& Caulk
Storage &
Convenience
JUL-65503001
For marking angles and checking alignment in layout
applications. Features spring-loaded pin to lock in
opened position, and hanging hole for storage. Aluminum construction.
Collapsed
No.
Dim.
Unit# 3468143
BOX SYSTEM FRONT TEMPLATES
Screws &
Fasteners
For all face frame adapter plates. Cam lever clamps
template to frame. Includes 2.5mm pilot bit and extension, reversible bushing inserts for 32mm and 40mm
hole spacing, and M4 x 25mm spacer screws.
For Frame
No.
Thick. In.
BLUMOTION boring template
Unit # 3468167
Shelving
& Hardware
108T
Desc.
Universal boring template
BORING TEMPLATES
BORING TEMPLATES
50
No.
JUL-651051
Mounting plate jig
Unit # 3468052
48T
For pre-boring locating pins for AVENTOS system, or
for marking and pre-boring cabinet profiles and adapter
plates for BLUMOTION and TIP-ON systems. Features
calibrated scale. Includes 2.5mm and 5mm stop collars.
Wood
Products
JUL-655070
Edgebanding
& Veneers
Universal
Lighting
No
ECOJIG
Cabinet Locks
& Latches
OAL
In.
BORING TEMPLATES
Desc.
JUL-T651000
Boring template
JUL-T659000
Tool set
For manually boring holes for drawer front, back and
bottom. Includes 3/16” and 3/8” stop collars and 3/8”
center punch.
No.
Desc.
JUL-METATEMP
Drilling template
209
& Machines
For use in flooring applications. Features heat-treated
steel construction, 14-1/2” long plug-welded head, nail
hole at one end of blade, and 45° angled edge for miter
work. Blade measures 2-1/2” W x 1/8” thick. Green finish.
Unit # 3468274
MOUNTING PLATE JIGS
Decorative
Hardware
Unit # 3468138
Unit # 3897026
T-SQUARES
Sinks
Measuring Tools, Boring & Assembly Templates
Templates, Drawer Assembly Tools & Boring Machines
Unit # 3468122
Unit # 3468220
HINGE TEMPLATES
BORING MACHINES
QUICKFIX
MINIDRILL P
Unit # 3468279
For locating positions of
hinges and wing or in-line
mounting plates, and for
transferring positions from
door to cabinet and cabinet to door. Adjustable
stop accommodates various
overlay
types.
Includes 1-meter rail, (2)
templates w/ marking
pins, fixed inner and outer
stops and adjustable
overlay stop.
CABINET PROFILE TEMPLATES
Templates
No.
Desc.
For pre-boring TANDEM and TANDEMBOX drawer
runner holes; can also be used for pre-boring holes for
AVENTOS locating pins and hinge mounting plates.
No.
Desc.
JUL-657500
No.
Desc.
JUL-651000
JUL-657510
CLIP template
JUL-657590
2200mm QUICKFIX extension rail
JUL-659510
MODUL template
Cabinet profile template
Unit# 3468141A
DRAWER ASSEMBLY TEMPLATES
Hinge template
Accessories
For use in boring/insertion of hinges, mounting plate
and drawer fronts. Features adjustable front boring distance and dust collection attachment. Accepts 7 or 8
spindle boring heads. Includes center ruler, work table,
(4) ruler stops, (2) boring depth stops, breakaway
clutch and tool kit.
No.
Volts
Phases
JUL-M53105350
220
1
JUL-M53100450
220
3
JUL-M53100550
440
3
Templates, Drawer Assembly Tools & Boring Machines
Unit # 3468177
BORING MACHINES
METABOX/TANDEMBOX
MINIPRESS P
Unit # 3468050
DRAWER ASSEMBLY TOOLS
MINIFIX
For positioning cabinet profile screws on METABOX
Series 320M, N, K, H,
330M, H and 230M runners.
For marking or boring holes on front fixing brackets,
drawer backs and bottoms. For use with Series 320/
330 N, M, K, H and 358 N, M drawers. Requires 5mm
and 10mm drill bits (not included).
No.
Desc.
JUL-ZML0040
Drawer assembly template
Unit # 3468141
DRAWER ASSEMBLY TEMPLATES
No.
Color
JUL-653300
Orange
For use in boring/insertion of hinges, mounting plate
and drawer fronts. Features adjustable front boring distance and dust collection attachment. Accepts 7 or 8
spindle boring heads. Includes center ruler, work table,
(4) ruler stops, (2) boring depth stops, breakaway
Deluxe. Features digital counter for boring distance,
and pneumatic hold-down clamps.
No.
Volts
Phases
Deluxe
Unit# 3468214
DRILLING TEMPLATES
METABOX
Unit# 3468176
METABOX/TANDEMBOX
For pilot boring mounting holes for pull-out tray corner
supports. Includes (3) 2.5mm drill bits and #2 Phillips
screwdriver.
No.
Desc.
JUL-ZML001C
For marking or boring holes on front fixing brackets,
drawer backs and bottoms. For use with Series 320/
330 N, M, K, H and Series 358 N, M drawers. Requires
5mm and 10mm drill bits (not included).
No.
Desc.
JUL-ZML0070
Drawer assembly template
Need help with
specifications?
will be happy to
assist you!
210
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
JUL-M531004US
220
3
JUL-M531005US
440
3
JUL-M531053US
220
Standard
1
220
1
JUL-M531053UB
Corner post template
Unit # 3468178
BORING MACHINES
Manual – MINIPRESS M
Unit# 3468142
For boring hinge and
mounting plate systems,
front fixing brackets and
drawer
components.
Also allows 3-hole line
boring of cabinet sides.
Features 4 positioning
stops and dust collection
attachment. 110V, 1
phase. Accepts 7 or 8
spindle boring heads.
Includes center ruler,
work table, (4) ruler
stops, (2) fixed boring
depth stops, breakaway
KNOCK-IN TOOLS
METABOX
For manual installation of front fixing brackets.
No.
For Use With
Bracket Series
JUL-ZME160001
ZSF1300, ZSF1800
JUL-ZME16100
ZSF1610
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
No.
Desc.
JUL-M521056US
Manual Minipress
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Surfacing
Products
Drawer Assembly Tools, Boring Machines & Accessories
Unit# 3468215
DRAWER ASSEMBLY SYSTEMS
Sinks
BOXFIX M
Unit # 3468139
JUL-MZM0037
COMPACT series hinges
JUL-MZM0038
Modified hinges for nylon dowel insertion
JUL-MZM0050
Dowel plate
JUL-MZM0077
410110 Housing
JUL-MZM009201
JUL-ZMM3350
270 to 650
300 to 1200
Up to 350
Unit # 3468210
BORING MACHINE HEADS
170° steel cup hinges
ZSF1300 series fixing brackets
JUL-MZM009302
ZSF1610
Drawer Assembly Tools, Boring Machines & Accessories
JUL-MZK1000US
JUL-MZS3000L and JUL-MZS3000R
JUL-MZE2110
JUL-MZR530001
Accessories
No.
Desc.
Bores holes spaced 32mm apart.
No. JUL-MZK1000US. Bores holes parallel to fence. Features retractable index pins
for continuous boring. For use with 32mm system.
No. JUL-MZK8000US. Bores holes perpendicular to fence. For use with all
METABOX and TANDEMBOX front fixing brackets and galleries, and bores cabinet
side panels for all Blum runner systems (except SOLO).
No.
Desc.
JUL-MZM0383
Replacement pin for JUL-MZM0038
JUL-MZK1000US
JUL-MZR2000
Center position stop
JUL-MZK8000US
JUL-MZS0040
MINISTICK drilling stop
JUL-MZS1000
Ruler stop, non-handed
JUL-MZS2000R
Right ruler stop, small
JUL-MZS3000L
Left ruler stop
JUL-MZS3000R
Right ruler stop
JUL-MZL1250US
Extension ruler
JUL-MZV1000
Ruler support
JUL-M300212
600mm Center ruler
JUL-M301304
Depth stop
JUL-M301323
Left chuck
JUL-M301324
Right chuck
JUL-MZE2110
8 Spindle
Unit # 3468221
BORING MACHINES
ECODRILL
Wood
Products
Left ruler stop, small
7 Spindle
Lighting
JUL-MZS2000L
JUL-MZK8000US
Digital counter kit
JUL-MZR530001
Laser center line kit
Bores hinge patterns. For use with electric/cordless drills 14V or greater. Includes
pre-installed drill bits and (2) Torx driver bits.
Unit # 3468281
DRAWER ASSEMBLY JIGS
Boring Machines
BOXFIX M
For fast, efficient assembly of TANDEMBOX drawers with up to 13-3/4” back
height. Features adjustable stop for drawer
width.
For Cabinet
No.
Width In.
JUL-ZMM3350L74
11-3/4 to 47-1/4
Shelving
& Hardware
JUL-MZM0018
Screws &
Fasteners
100° & Thick door hinges
Storage &
Convenience
100°/110°/125° hinges
JUL-MZM0011
No.
For Door
Thick. mm
Boring Dist.
mm
JUL-M311000
Up to 40
2 to 8
Accessories
Includes (2) wrenches, (2) torx driver bits and (3) torx chucks.
No.
Desc.
JUL-MZW1300
Tool set
211
Cabinet Locks
& Latches
JUL-MZM0010
Allows upright assembly of TANDEMBOX “M” and “N” height drawers.
For Drawer
For Cabinet
For Back
No.
Length mm
Width mm
Height mm
Abrasives
For Use
With
No.
Decorative
Hardware
JUL-MZM009201
Insertion Rams
& Machines
JUL-MZM0010
Adhesives
& Caulk
Edgebanding
& Veneers
BORING MACHINE ACCESSORIES
Edge Trimmers
Unit
Unit##CAT08_pg10_sm
CAT08_pg9_sm
Edge Trimmers
212
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Custom Color Punch Tools
213
Surfacing
Products
Custom Color Punch Tools
& Machines
Flush Mount Drill Bits & Layout Tape
Flush Mount Drill Bits & Layout Tape
214
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Edgebanding Adhesives
215
Surfacing
Products
Edgebanding Adhesives
& Machines
Laminate Rollers
Laminate Rollers
216
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Laser Leveling Systems
217
Surfacing
Products
Laser Leveling Systems
& Machines
Unit # CAT08_pg15_smLaserJamb
Laser Levels
Laser Levels
218
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Telescoping Braces
219
Surfacing
Products
Telescoping Braces
& Machines
Telescoping Braces
220
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Laser Level Mounts & Door Magnets
221
Surfacing
Products
Laser Level Mounts & Door Magnets
& Machines
Saw Hoods
Saw Hoods
222
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Tile Saw Mounting Brackets & Euro Finishing Clips
223
& Machines
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Surfacing
Products
Tile Saw Mounting Brackets & Euro Finishing Clips
Edge Sanders
Edge Sanders
224
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Tape Measures
225
Surfacing
Products
Tape Measures
& Machines
Tape Measures
226
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Tape Measure Clips & Outlet Templates
227
& Machines
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Surfacing
Products
Tape Measure Clips & Outlet Templates
CAT08_pg25_sm
Scribing Tools
Scribing Tools
228
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Suction Handles
229
Surfacing
Products
Suction Handles
& Machines
Panel Assembly Blocks
Panel Assembly Blocks
230
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Dollies
231
Surfacing
Products
Dollies
& Machines
Crown Moulding Installation Tools & Magnets
Crown Moulding Installation Tools & Magnets
232
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Magnetic Wrist Straps & Drawer Corner Plates
233
& Machines
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Surfacing
Products
Magnetic Wrist Straps & Drawer Corner Plates
Glue Bottles
Glue Bottles
234
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Dust Masks
235
Surfacing
Products
Dust Masks
& Machines
Dust Masks
236
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Ballistic Aprons & FastCap Gear
237
Surfacing
Products
Ballistic Aprons & FastCap Gear
& Machines
Safety Glasses
Safety Glasses
238
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
FastCap Products
239
Surfacing
Products
FastCap Products
& Machines
Chisels
Unit # CAT09_PG3_sm
Chisels
240
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Tool Grips
241
Surfacing
Products
Tool Grips
& Machines
Unit # CAT09_PG4_sm
Flush Cut Trimmers, Nippers & Power Shears
Unit # CAT09_PG5_sm
Flush Cut Trimmers, Nippers & Power Shears
242
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Blind Nail & Staple Setters
243
Surfacing
Products
Blind Nail & Staple Setters
& Machines
Unit # CAT09_PG6_sm
Telescoping Braces & Drawer Guide Mounting Blocks
Unit # CAT09_PG7_sm
Telescoping Braces & Drawer Guide Mounting Blocks
244
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Cap Lights & Work Gloves
245
Surfacing
Products
Cap Lights & Work Gloves
& Machines
Unit # CAT09_PG8_sm
Tool Bags
Tool Bags
246
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Bit & Fastener Organizers
247
Surfacing
Products
Bit & Fastener Organizers
& Machines
Joist Clips, Layout Drill Bits & Magnetic Squares
Joist Clips, Layout Drill Bits & Magnetic Squares
248
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Bit Holders & Caulking Gun Caps
249
Surfacing
Products
Bit Holders & Caulking Gun Caps
& Machines
Temporary Drawer Pulls, Pattern Markers & Planes
Temporary Drawer Pulls, Pattern Markers & Planes
250
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Abrasives
Cabinet Locks
& Latches
Lighting
Wood
Products
Storage &
Convenience
Screws &
Fasteners
Shelving
& Hardware
Decorative
Hardware
Adhesives
& Caulk
Edgebanding
& Veneers
Sinks
Utility Knives & Finish Hammers
251
Surfacing
Products
Utility Knives & Finish Hammers
& Machines
Magnets & Outlet Trim Rings
CAT09_PG17_sm
Magnets & Outlet Trim Rings
252
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3627001
1670001
3003003
Unit # 3468166
Unit # 1729182
1693-32
2-1/2 x 2-1/2 x 3/4
Drawer Components, Dowels & Bumpers
KNA-475FZC
No.
Hole
Dia. mm
Qty.
JUL-174H7100E8
5
200
KNA-476FZC
Edgebanding
& Veneers
EXPANDO
Adhesives
& Caulk
For corner blocks. Screws or staples in place.
Dim.
No.
In.
Color
Unit # 3468023
DRAWER FRONT ADJUSTERS
Anochrome finish. 10 per carton.
Followers
Natural
No.
Dim. In.
HxW
KNA-475FZC
2-11/16 x 4-3/4
Card-size
KNA-476FZC
7-5/8 x 10-3/4
Letter-size
Unit # 1729171
For use with 4-sided drawers.
Allows height and side-to-side
adjustment. Nylon housing with
pre-mounted 8-32 steel nut.
Desc.
Tracks
CORNER BRACES
Surfacing
Products
DOWELS
DRAWER INDEX FOLLOWERS &
TRACKS
Plastic
No.
Lgth.
In.
No.
Adjust.
In.
Dia.
mm
Qty.
KNA-476TZC
26
JUL-2951000
3/16
20
1000
Unit # 1729196
Unit # 3468049
LABEL HOLDERS
MARKING GAUGES
Decorative
Hardware
CORNER BRACES
Miscellaneous
Sinks
Drawer Components, Dowels & Bumpers
Dim. In.
LxW
KNA-341ZC
1x1
KNA-342ZC
2x2
KNA-701ANO
JUL-65295010
KNA-704ANO
Steel with Anochrome finish. 100 per package.
Dim. In.
No.
Desc.
WxH
For 2” x 1” cards
2-5/8 x 1-7/16
KNA-704ANO
For 2-5/16” x 1-1/2”
cards
3-1/2 x 1-3/4
Polo
20 x 10
Unit # 3627001
Storage &
Convenience
WIPING CLOTHS
KNA-701ANO
Screws &
Fasteners
For marking center holes for
knock-in adjusters on wooden
drawer fronts. Requires 20mm
hole.
Dim. mm
No.
Dia. x H
Zinc plated stamped steel. Mounts with 3/4” #10 wood
screws. 100 per package.
No.
Shelving
& Hardware
Drawer Front Adjuster
Unit # 3627001
Unit # 3468230
Nylon construction. Barbed design
provides increased screw-holding
strength. For use with #6 screws.
MANUFACTURERS’
CATALOGS
Dia.
mm
Qty.
JUL-440850
5
2000
JUL-80353201
10
1000
No.
BS7
BS19
Self-adhesive, peel-and-stick design for use on cabinets, electronics, picture frames, cutting boards, furniture and other applications.
Provides skid and
abrasion resistance; dampens vibration and shock.
Nonstaining, nonmarring. UL recognized.
No.
Dim. mm
Thick. x W
Color
Cylindrical
Bumpers
Per Sheet
BS1CLEAR
3.5 x 12.7
Clear
200
BS1WHITE
200
DOWELS
3.5 x 12.7
White
Hemispherical
BS2CLEAR
5.1 x 11.1
Clear
242
Press-In
BS7CLEAR
2.2 x 8.5
Clear
Square
450
BS3RBLACK
5.8 x 12.7
Black
200
BS19WHITE
7.6 x 20.6
White
98
Unit # 3468055
For all COMPACT, CLIP TOP and MODUL
hinges. Nylon construction.
Dim. mm
No.
Dia. x L
Unit # 4049001
JUL-700532
8 x 10
253
Lighting
BS1
25
Cabinet Locks
& Latches
Near white
Abrasives
6413-25
EXPANSION DOWELS
& Machines
For painting, staining, polishing, dusting and similar
applications. Features space-saving box design with
dispenser top.
Qty.
No.
Color
Lbs.
Wood
Products
POLYURETHANE BUMPERS
Bumpers, Grommets & Leg Levelers
MARIAN, INC.
HINGE PADS
Unit # 3013016
WIRE GROMMETS
Unit # 3468235
LEG LEVELERS
Round – Flexigrom®
Press-In
No.
Desc.
HINGEPADS
Hinge pads
Features one-piece construction with flexible top to
accommodate multiple wires from multiple directions.
Unit # 4031042
Dim.
No.
BUMPER PADS
Felt construction. Roll.
No.
FP-1238-BN
Color
Qty.
Brown
5000
Unit # 3468172
OD In.
ID In.
OD mm
CPF2670
2.8
2.38
60
Color
Black
CPF2671
2.8
2.38
60
White
CPF2673
2.8
2.38
60
Grey
CPF2674
2.8
2.38
60
Almond
CPF2870
3.6
3.15
80
Black
CPF2871
3.6
3.15
80
White
CPF2873
3.6
3.15
80
Grey
CPF2874
3.6
3.15
80
Almond
Black ABS plastic construction.
No.
Adj.
Range In.
Cap.
Lbs.*
JUL-6111207700
3-3/4 to 5-1/2
850
* Per set of four.
Unit # 3468173
LEG LEVELERS
Screw-On
Unit # 3013009
DRAWER BUMPERS
WIRE GROMMETS
Interior
Round
Prevents runners from marring cabinet doors. Nylon
construction. 1000 per pkg.
No.
Color
JUL-6000301100
White
JUL-6000301121
Bumpers, Grommets & Leg Levelers
For managing wire and cable feeds to desktops. 3piece top allows hole adjustment.
No.
Almond
CPF2600
Unit # 3468225
DOOR PROTECTORS
A
Dim. In.
B
60mm (2.38”)
2.80
2.38
C
Color
0.98
Black
JUL-6972007700
* Per set of four.
CPF2601
2.80
2.38
0.98
White
Prevents damage to doors.
Epoxy coated steel construction
with synthetic rollers. Cream.
For Use With
No.
Runner Series
CPF2602
2.80
2.38
0.98
Brown
CPF2603
2.80
2.38
0.98
CPF2604
2.80
2.38
0.98
80mm (3.15”)
JUL-2982200 230M and 430E
CPF2800
3.60
Pull-Out Surround
3.15
0.98
3-3/4 to 5-1/2
850
Gray
Almond
Black
CPF2804
3.60
3.15
0.98
Almond
Wire & Paper Grommets, Leg Levelers & Metal Mouldings
Unit # 3013010
ABS plastic construction with steel mounting screw.
Black.
Leg Levelers
Adjust.
Cap.
No.
Range In.
Lbs.*
JUL-6021707700
JUL-6021807700
Unit # 3013008
PAPER SLOT GROMMETS
WIRE GROMMETS
Oval
JUL-6880031100
Nos. JUL-6021707700 & -1807700. Snap around leg
leveler; adjusts side-to-side to aid in alignment.
No. JUL-6880031100. Conceals mounting screw on
leg leveler. Nylon construction. White.
For managing wire and cable feeds to desktops. 3piece top allows hole adjustment.
No.
CPF21750
17 x 0.95 x 0.98
Color
CPF2900
254
For tractor-feed printer stands; allows smooth paper
flow. Outward-bowing design keeps grommets in place
after installation.
Dim. In.
No.
LxWxH
Accessories
No.
Desc.
JUL-6021707700
Screw-on toekick clip
JUL-6021807700
Press-in toekick clip
JUL-6880031100
Surface mount cover cap
Black
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
Unit # 3049001
EXPANSION JOINTS
Surfacing
Products
Sinks
Expansion Joints, Spacers & Wall Base
Unit # 3468171
Edgebanding
& Veneers
DRAWER RUNNER SPACERS
Unit # 3640001
METAL MOULDINGS
1000
JUL-580570
13
260P5000
5000
JUL-580580
9
260P50000
50,000
JUL-580590
3
Unit# 3468184
SIDE SPACERS
Unit # 3468170
R151A
E150
Cap
Etched
R150A
Cap
Polished
E151A
Cove
Etched
R151A
Cove
Polished
CABINET PROFILE SPACERS
For use with TANDEM, SOLO and TANDEMBOX runners. Requires 5mm system screws when fastening to
slides; #7 wood screws when fastening to cabinet.
Thick.
No.
In.
JUL-T593570
No.
Size
mm
JUL-602750
19
1
Unit # 4043001
Heavy-duty design. Synthetic construction with neutral
color.
Note: Deep-thread system screws (not included)
should be used to connect runner, spacer and cabinet
side.
Unit # 3867001
Qty.
WALL BASES
100
Rubber
Storage &
Convenience
For residential and commercial applications. Extruded
aluminum alloy construction. 12-ft. length.
Nos. R150A, E150A & R151A. For use with light
gauge (1/16”) materials.
No.
Desc.
Finish
Wood
Products
E151A
Unit # 3468226
METAL MOULDINGS
260P1000
Shelving
& Hardware
Nylon construction. Natural color. For use with system
screws or #7 wood screws (not included). 1000 per
pkg.
Width
No.
mm
Screws &
Fasteners
R150A
E150
For joining solid panels. Compresses to compensate
for panel expansion. Eliminates rattling and cracking
glue joints.
Pkg.
No.
Qty.
Decorative
Hardware
Adhesives
& Caulk
Kintrim
CABINET PROFILE SPACERS
No.
G16-144
Desc.
Finish
Cove
Etched
We appreciate
your business!
JUL-320M0188
For clearing door protrusion for interior roll-out trays.
Synthetic construction. Cream.
No. JUL-320M0188. Features built-in 5mm x 11mm
dowel.
Size
No.
Desc.
In.
JUL-320M0048
Stackable
JUL-320M0088
Stackable
5/32
5/16
JUL-320M0188
Linebore mounting
5/16
255
Abrasives
For residential and commercial applications. Extruded
aluminum alloy construction. 12-ft. length.
JUL-320M0088
& Machines
JUL-320M0048
For use on cabinetry, booth or fixture toe kicks. Resists
scuffing, fading and cracking. Measures 48” L x 4” H x
1/8” thick. Meets ASTM requirements.
Straight Profile. Toeless design for use on carpet.
Coved Profile. Features .450” toe for use on resilient
flooring.
No.
Color
Straight Profile
DCT01441/8
Snow white
DCT03441/8
Sahara khaki
DCT09441/8
Clay
DCT103441/8
Sprout
DCT11441/8
Canvas
DCT121441/8
Cement
DCT130441/8
Sisal
DCT133441/8
Mahogany
DCT145441/8
Safari
Cabinet Locks
& Latches
Lighting
METABOX
No.
DCT150441/8
DCT167441/8
DCT189441/8
DCT193441/8
DCT20441/8
DCT21441/8
DCT26441/8
DCT27441/8
DCT29441/8
DCT32441/8
DCT33441/8
DCT34441/8
DCT36441/8
DCT40441/8
DCT45441/8
DCT47441/8
DCT48441/8
DCT49441/8
DCT55441/8
DCT63441/8
DCT68441/8
DCT70441/8
DCT80441/8
DCT82441/8
Color
Wetlands
Fudge
Ocean
Tangier
Charcoal
Platinum
Purple shadow
Mist
Moon rock
Pebble
Adobe peach
Almond
Manatee
Black
Sandalwood
Brown
Gray
Beige
Silver gray
Burnt umber
White sand
Bluest
Fawn
Black pearl
Coved Profile
DC01441/8
DC03441/8
DC05441/8
DC07441/8
DC09441/8
DC101441/8
DC102441/8
DC103441/8
DC104441/8
DC107441/8
DC11441/8
DC121441/8
DC123441/8
DC12441/8
DC126441/8
DC129441/8
DC130441/8
DC131441/8
DC132441/8
DC133441/8
DC135441/8
DC138441/8
DC140441/8
DC14441/8
DC144441/8
DC146441/8
DC147441/8
DC149441/8
DC150441/8
DC151441/8
DC15441/8
DC162441/8
DC166441/8
DC167441/8
DC168441/8
DC178441/8
DC179441/8
DC180441/8
DC183441/8
DC18441/8
DC185441/8
256
Snow white
Sahara khaki
Stone
Wood violet
Clay
Seaweed
Verdant
Sprout
Pinkie
Neutrality
Canvas
Cement
Mineral springs
Hard rock
Mocha
Silk
Sisal
Camel
Espresso
Mahogany
Chinese jade
Celery
Carrot
Tropical storm
Blueprint
Butternut
South Seas
Milk chocolate
Wetlands
Iguana
Cabernet
Sovereign
Sienna
Fudge
Thunder
Ironstone
M/P steel
Graphite
Citron
Navy blue
Dreamsicle
Kansas City, KS
Toll-Free: 800-366-5778
Fax: 800-229-8016
No.
DC186441/8
DC187441/8
DC188441/8
DC189441/8
DC190441/8
DC191441/8
DC192441/8
DC194441/8
DC195441/8
DC20441/8
DC21441/8
DC22441/8
DC23441/8
DC24441/8
DC25441/8
DC259441/8
DC262441/8
DC264441/8
DC272441/8
DC273441/8
DC27441/8
DC276441/8
DC280441/8
DC283441/8
DC28441/8
DC284441/8
DC29441/8
DC30441/8
DC31441/8
DC32441/8
DC33441/8
DC34441/8
DC36441/8
DC38441/8
DC40441/8
DC41441/8
DC42441/8
DC43441/8
DC44441/8
DC45441/8
DC47441/8
DC48441/8
DC49441/8
DC50441/8
DC51441/8
DC54441/8
DC55441/8
DC57441/8
DC58441/8
DC59441/8
DC60441/8
DC63441/8
DC66441/8
DC67441/8
DC68441/8
DC6941201/8*
DC69441/8
DC71441/8
DC72441/8
DC73441/8
DC76441/8
DC79441/8
DC80441/8
DC82441/8
DC83441/8
DC84441/8
Wichita, KS
Toll-Free: 800-365-0344
Fax: 800-774-8360
Color
Mousi
Pansy
Raisin
Ocean
Greege
Lazuli
Tidewater
Antique white
Ash
Charcoal
Platinum
Pearl
Vapor gray
Gray haze
Froth
Terra firma
Drizzle
Grounded
Buff
Copper penny
Mist
Mystical
Shoreline
Toast
Medium gray
Ganache
Moon rock
Ink
Zephyr
Pebble
Adobe peach
Almond
Manatee
Pewter
Black
Sea breeze
Sable
Hyacinth
Dark brown
Sandalwood
Brown
Gray
Beige
White
Olive
Dusk
Silver gray
Flaxen
Windsor blue
Heather green
Taupe
Burnt umber
M/P Either ore
Old gold
White sand
Sterling silver
Sterling silver
Storm cloud
Harbour
Palm leaf
Cinnamon
Bone white
Fawn
Black pearl
Midnight
Blue jeans
Springfield, MO
Toll-Free: 800-774-9515
Fax: 800-774-8393
No.
DC85441/8
DC86441/8
DC92441/8
DC143441/8
DC270441/8
DC08441/8
DC19441/8
DC62441/8
DC70441/8
DC74441/8
DC75441/8
DC105441/8
DC106441/8
DC111441/8
DC112441/8
DC113441/8
DC127441/8
DC134441/8
DC137441/8
DC139441/8
DC141441/8
DC142441/8
DC148441/8
DC152441/8
DC163441/8
DC173441/8
DC184441/8
DC260441/8
DC261441/8
DC263441/8
DC271441/8
DC274441/8
DC275441/8
DC281441/8
DC282441/8
DC284441/8
DC286441/8
DC287441/8
DC288441/8
DC289441/8
DC290441/8
DC291441/8
DC292441/8
DC293441/8
DC294441/8
Color
Burgundy
Hunter green
Blue lagoon
Marine blue
Skydive
Icicle
Desert camel
Tangerine tango
Bluest
Iris
Lemon
Aquablu
Skinny dip
Honeycomb
Oakley
Chestnutty
Vanilla
Gold rush
Veiled violet
Glacier
Lipstick
Aquatic
Paprika
Shamrock
Salsa
Auburn
Daffy dil
Deep water
Autumn
Leafy
Seedling
Gold digger
Vegetate
Grizzly
Vaporize
Morning light
Fortune cookie
Rustic
Rouge
Jaded
Tea green
Laguna
Evening shower
Peacock
Big top
* 120-ft. coil.
we carry are listed
in this catalog.
please contact
your local branch
for assistance.
Oklahoma City, OK
Toll-Free: 800-942-3594
Fax: 405-524-1715
Tulsa, OK
Toll-Free: 800-324-5036
Fax: 918-250-6170
INDEX
A
Index
ABRASIVE
Belts, Mirka ..........................197–199
Discs, Mirka .........................195–196
Pads, Mirka ..................................195
Rolls, Mirka ..................................196
Sponges, Mirka ............................196
ADAPTER
Plates, Blum.......................96, 98–99
Profiles, Blum...............................144
ADAPTER PLATES
Cam, Blum .....................................96
ADAPTER SETS
Drawer Opener, Blum ....................86
ADAPTERS
APPLICATOR
BEADED/FLUTED
Bottles, Gundlach ........................ 201
APRONS
Ballistic, Fastcap.......................... 237
ARC
Lamps, Hera ................................ 187
Screws, QuickScrews.......... 121–124
ASSEMBLY JIGS
Drawer, Blum............................... 211
ASSEMBLY SYSTEMS
Drawer, Blum............................... 211
ASSEMBLY TOOLS
Drawer, Blum............................... 210
ATTACHMENT SETS
Drawer, Blum................................. 85
Contact, Wilsonart....................39–40
Edgebanding, Fastcap .................215
Fastcap ..........................................45
Hot Melt, Fastcap...........................48
Melamine, Wilsonart ......................40
PVA, Wilsonart.........................40–41
Seam, Karran...........................19, 44
ADJUSTERS
Drawer Front, Blum......................253
ADJUSTING SCREWS
Drawer Front, QuickScrews .........125
AEROSOL
Cleaners, ProtectAll .......................44
Lubricants, Lami-Lube ...................44
AFCO
Mouldings, Metal..........................255
AMANA TOOL
Bits, Boring...................................201
Bits, Router ..........................205–208
Blades, Circular Saw....................201
Boring Bits, Hinge ........................201
Guides, Ball Bearing ....................201
Knives, Insert ...............................208
ANGLE RESTRICTION
Clips, Blum.......................93–94, 103
APPLIANCE
Garages, Omega National ...........158
Abrasive, Mirka ....................197–199
Fastcap ........................................237
Door Mounting Kits,
Rev-A-Shelf ................................139
BINS
Media Storage,
Custom Accents .........................155
BIT
Holders, Fastcap..........................249
Holders, QuickScrews..................134
BIT & FASTENER
Organizers, Fastcap.....................247
BIT KITS
ADHESIVE
ADHESIVES
BELTS
BIN & HAMPER
ASSEMBLY
Center, Blum ..................................84
Caulk, OSI......................................44
Cleaners, Wilsonart........................40
Colorant Kits, Fastcap....................45
Guns, Karran..........................19, 202
Solvents, Wilsonart ........................40
Spray Equipment, Wilsonart ..........40
Caps, Omega National.................172
Fillers, Omega National ...............171
B
BACKUP
Pads, Mirka.................................. 196
BAGS
Tool, Fastcap............................... 246
BAINBRIDGE MANUFACTURING
Braces, Corner ............................ 253
Sockets.......................................... 72
Supports, Shelf ............................ 115
BALL BEARING
Carriers, Knape & Vogt................ 112
Guides, Amana Tool.................... 201
BALLISTIC
Insert, QuickScrews .....................134
BITS
Boring, Amana Tool .....................201
Drill, Blum.....................................202
Drill, Fastcap ................................214
Drill, Hera .....................................202
Drive, QuickScrews......................134
Insert, QuickScrews .....................134
Power, QuickScrews....................133
Router, Amana Tool.............205–208
Step Drill, QuickScrews ...............202
BLADES
Circular Saw, Amana Tool ...........201
Utility Knife, Gundlach..................202
BLIND
Nail & Staple Setters, Fastcap .....243
Aprons, Fastcap .......................... 237
BAR RAIL COMPONENTS
S. Parker Hardware ..................... 114
BARS
Extension, QuickScrews.............. 134
Towel, Knape & Vogt................... 153
Towel, Rev-A-Shelf...................... 153
BASE CABINET
BLIND CORNER
Organizers, Rev-A-Shelf ..............150
BLOCKS
End, White River ..........................171
Modillion, White River ..................165
Panel Assembly, Fastcap ............230
Terminal, Hera .............................190
BLOWERS
Organizers, Rev-A-Shelf.............. 151
BASES
Range Hood, Omega National .....157
BLUM
Wall, Johnsonite .................. 255–256
BASKET
Dividers, Rev-A-Shelf .................. 149
BASKETS
Pull-Out, Rev-A-Shelf ................. 142,
149–150
Rattan, Rev-A-Shelf..................... 154
Undersink, Rev-A-Shelf ............... 150
Wire, Rev-A-Shelf........................ 149
i
Adapter Plates, Cam......................96
Adapter Sets, Drawer Opener........86
Adapters, Center............................84
Adjusters, Drawer Front ...............253
Assembly Systems, Drawer .........211
Assembly Tools, Drawer ..............210
Attachment Sets, Drawer ...............85
Bits, Drill.......................................202
Boring Machine Accessories........211
Boring Machines ..................210–211
I
N
D
E
X
INDEX
BLUM, CONTINUED
Bracket Sets, Drawer .....................85
Bracket Sets, Universal..................85
Brackets, Bottom............................87
Brackets, Top.................................87
Bumpers, Distance.........................87
Bumpers, Drawer .........................254
Caps, Cover ...................................84
Clips, Angle Restriction....93–94, 103
Closing Systems, Door ............97–99
Connectors, Cabinet ....................130
Connectors, Spring-Loaded .........149
Cover Caps, Hinge.........................97
Cover Caps, Hinge Cup .................97
Cover Caps, Lift Mechanism........104
Cover Plates, Lift Mechanism ......104
Cross Rails, Drawer .......................84
Design Element Sets .....................84
Dividers, Cross.............................144
Dividers, Drawer ..........................143
Dividers, Inside ............................144
Dividers, Lateral ...........................144
Dividers, Tray...............................149
Dowels, Expanding ......................253
Dowels, Expansion ......................253
Dowels, Press-In..........................253
Drawer Accessories .......................78
Drawer Opener Sets ......................86
Drawer Side Sets ...........................81
Drawer Systems.............................81
Drawer Systems, Cabinet ........74–75
Drive Units, Drawer Opener...........86
Electrical Components, Drawer
Opener .........................................86
End Caps, Drawer..........................84
Extensions, Drawer Profile.............83
Fixing Brackets,
Front ...........................76–77, 81–84
Fixing Brackets, Rear.........82–83, 85
Front Pieces, Drawer .....................84
Gauges, Marking..........................253
Handles, Drawer Front...................84
Handles, Interior.............................82
Heads, Boring Machine................211
Hinges, Clip Top ......................93–95
Hinges, One Piece .........................97
Hinges, Two Piece .........................97
Holders, Plate ..............................144
Inserts, Utensil Drawer.................148
Jigs, Drawer Assembly ................211
Jigs, Mounting Plate.....................209
Knife Holder Sets .........................147
Knock-In Tools .............................210
Levelers, Leg ...............................254
Lift Mechanism Sets.............103–104
Lift Systems, Door................102–103
Locking Devices.............................80
Mounting Blocks, Rear...................80
Mounting Brackets, Rear ...............80
BLUM, CONTINUED
Mounting Plates, Cam ................... 96
Mounting Plates, Hinge ........... 96, 98
Mounting Plates, Wing................... 96
Openers, Drawer ........................... 80
Opening/Closing Systems,
Drawer ......................................... 85
Organizers, Bottle........................ 144
Organizers, Cutlery.............. 143, 149
Organizers, Drawer ..................... 149
Organizers, Utensil .............. 143, 148
Plates, Adapter .................. 96, 98–99
Profile Sets, Drawer................. 82–83
Profiles, Adapter .......................... 144
Profiles, Horizontal ........................ 86
Profiles, Vertical............................. 86
Protectors, Door .......................... 254
Rail Sets, Gallery........................... 77
Rail Sets, Hanging......................... 76
Rails, Front .................................... 82
Rods, Gallery................................. 82
Runners, Drawer ......... 68, 70, 78–79
Screwdrivers................................ 208
Screws, System........................... 126
Screws, Twin Application............. 130
Sensors, Vibration ......................... 87
Sides, Drawer ................................ 77
Sockets, Drawer Runner ... 69, 78, 80
Spacers, Cabinet Profile.............. 255
Spacers, Distance ......................... 97
Spacers, Drawer Runner ............. 255
Spacers, Side .............................. 255
Spice Tray Sets ........................... 144
Stabilization Brackets, Front.......... 84
Stabilizer Sets................................ 82
Supports, Corner ........................... 77
Supports, Shelf ............................ 115
Templates, Boring ....................... 209
Templates, Box System............... 209
Templates, Cabinet Profile .......... 210
Templates, Drawer Assembly...... 210
Templates, Drilling....................... 210
Templates, Drillng........................ 209
Templates, Hinge ........................ 210
Trays, Cutlery .............................. 149
Trays, Spice................................. 147
Wedges, Spacer ............................ 95
BOARDS
Cutting, Rev-A-Shelf.................... 145
Ironing, Rev-A-Shelf .................... 154
BOLTS
Draw, QuickScrews ..................... 130
BORING
Bits, Amana Tool ......................... 201
Templates, Blum.......................... 209
BORING MACHINE
Heads, Blum ................................211
BORING MACHINE
ACCESSORIES
Blum.............................................211
BORING MACHINES
Blum.....................................210–211
BOTTLE
Organizers, Blum .........................144
BOTTLES
Applicator, Gundlach....................201
Glue, Fastcap...............................234
BOTTOM
Brackets, Blum...............................87
BOX & FILE DRAWER
Slides, Knape & Vogt ...............72–73
BOX DRAWER
Slides, Knape & Vogt .....................71
BOX SYSTEM
Templates, Blum ..........................209
BOXES
Drawer, Drawer Box
Specialties ..................................179
Hardwire, Hera.............................188
BRACES
Corner, Bainbridge
Manufacturing.............................253
Corner, Knape & Vogt..................253
Countertop, Fastcap ....109–110, 132
Telescoping, Fastcap...219–220, 244
BRACKET ACCESSORIES
Knape & Vogt...............................115
BRACKET SETS
Drawer, Blum .................................85
Universal, Blum ..............................85
BRACKETS
Bottom, Blum .................................87
Drawer Slide, Knape & Vogt ..........69
Hanging Rod, Knape & Vogt........113
Mounting, Knape & Vogt ..........67, 72
Shelf, Knape & Vogt.............107–109
Stabilization, Blum .........................84
Support, Knape & Vogt ................105
Support, Omega National ............160
Top, Blum.......................................87
Wall, White River .........................160
BREAD DRAWER
Cover Kits, Rev-A-Shelf ...............143
BREADBOARDS
Woodfold Marco...........................160
BREAKAWAY
BORING BITS
Hinge, Amana Tool...................... 201
ii
Machine Screws, QuickScrews....129
INDEX
BRUSHES
CANPLAST
Contact Cement, Gundlach..........202
Duster, Gundlach .........................202
File, Gundlach..............................203
BULBS
CHEST/LID
Adhesives, Hot Melt....................... 48
Edgebanding, Melamine................ 29
Edgebanding, PVC .................. 21–29
CAP
Fluorescent, Hera ........................184
Halogen, Hera..............................187
Xenon, Hera.................................181
BULLET
Catches, Knape & Vogt................191
BUMPER
Pads, Pride Industrial...................254
BUMPER SPECIALTIES
Bumpers, Polyurethane ...............253
BUMPERS
Distance, Blum...............................87
Drawer, Blum ...............................254
Polyurethane, Bumper
Specialties ..................................253
Sliding Door, Knape & Vogt .........113
BUN
Feet, Pride Industrial....................177
Feet, White River .........................177
BUTCHER BLOCK
Countertops, Michigan Maple
Block.............................................14
BUTTONS
White River ..................................173
C
CABINET
Connectors, Blum ........................130
Drawer Systems, Blum ............74–75
Feet, White River .........................176
Hardware Collections,
Liberty.....................................56–64
Security Systems, Rev-A-Shelf....191
CABINET DOOR
Stops, Fastcap ...............................89
CABINET INSTALLATION
Screws, QuickScrews ..................126
CABINET PROFILE
Spacers, Blum..............................255
Templates, Blum ..........................210
CABLES
Connecting, Hera .................187–188
Power Supply, Hera .............188–189
CAM
Adapter Plates, Blum .....................96
Locks, CompX..............................192
Mounting Plates, Blum ...................96
Locks, CompX..............................192
CHISELS
Fastcap ........................................240
CIRCULAR SAW
Lights, Fastcap ............................ 245
CAPITALS
Blades, Amana Tool.....................201
CLEANERS
Carved, White River .................... 170
Turned, White River..................... 170
White River .................................. 170
CAPS
Adhesive, Wilsonart .......................40
Aerosol, ProtectAll .........................44
CLIP TOP
Hinges, Blum............................93–95
Beaded/Fluted, Omega
National...................................... 172
Caulking Gun, Fastcap ................ 249
Cover, Blum................................... 84
Cover, Fastcap ........................ 31–33
Sealing, Little Red Cap.......... 44, 208
Top, Hera..................................... 190
CARRIERS
Ball Bearing, Knape & Vogt ......... 112
CARVED
Capitals, White River ................... 170
Centers, White River ........... 173–174
Corbels, White River............ 160–164
Corners, White River ................... 174
Drops, White River .............. 174–175
Medallions, White River............... 175
Plynths, White River .................... 171
Scrolls, White River ............. 175–176
Swags, White River ..................... 176
CLIP-ON
Hinge Plates, Pride
Industrial...............................99–100
Hinges, Pride Industrial..................99
CLIPS
Angle Restriction, Blum....93–94, 103
Finishing, Fastcap........................223
Glass Retainer, Knape & Vogt .....131
Glass Retainer, Pride Industrial ...131
Joist, Fastcap...............................248
Mirror, Knape & Vogt ...................130
Shelf, Rev-A-Shelf .......................115
Tape Measure, Fastcap ...............227
Wire Channel, Custom Accents ...131
CLOSET
Rods, Knape & Vogt ....................113
Rods, Pride Industrial...................114
CLOSING SYSTEMS
Door, Blum ...............................97–99
CASSETTE
Rollers, Knape & Vogt ................... 88
CATCHES
Bullet, Knape & Vogt ................... 191
Double Ball, Pride Industrial ........ 191
Magnetic, Pride Industrial ............ 191
CLOTHING
Racks, Knape & Vogt...................152
Racks, Rev-A-Shelf......................153
CLOTHS
Wiping, Intex ................................253
COLOR MATCHED
CAULK
Adhesive, OSI................................ 44
Color Matched, Wilsonart .............. 43
CAULKING
Caulk, Wilsonart.............................43
COLORANT KITS
Adhesive, Fastcap .........................45
Guns, Gundlach........................... 202
CAULKING GUN
Caps, Fastcap ............................. 249
CENTER
COMPACT HINGE
COMPUTER
Holders, Knape & Vogt ..................91
Adapters, Blum .............................. 84
CENTERS
Carved, White River ............ 173–174
CHANNELS
Sliding Door, Knape & Vogt......... 111
CHEMETAL
Metals, Decorative................... 11–13
Sheets, Veneer.............................. 14
iii
COMPX
Keys, Master ................................193
Locks, Cam ..................................192
Locks, Chest/Lid ..........................192
Locks, Drawer ..............................193
Locks, Furniture ...........................193
CONCEALED
Drawer Runners, Blum...................78
I
N
D
E
X
INDEX
CONCRETE
Screws, Fastcap ..................110, 132
CONNECTING
Cables, Hera ........................187–188
CONNECTORS
Cabinet, Blum ..............................130
Direct, Hera..................................188
Spring-Loaded, Blum ...................149
CONTACT
Adhesives, Wilsonart ...............39–40
CONTACT CEMENT
Brushes, Gundlach ......................202
CONTAINERS
Waste, Rev-A-Shelf .............139–142
Waste, Slide-Away Mfg................141
CONTINUOUS
Hinges, Terry Hinge &
Hardware....................................102
COOKWARE
CORBELS
Carved, White River.............160–164
Pride Industrial .....................161–164
White River ..........................163–164
CORNER
Braces, Bainbridge
Manufacturing.............................253
Braces, Knape & Vogt..................253
Feet, White River .........................177
Posts, White River .......................169
Supports, Blum ..............................77
CORNER PLATES
Drawer, Fastcap...........................233
CORNERS
Carved, White River.....................174
COSMETICS
COUNTERTOP
Braces, Fastcap ...........109–110, 132
COUNTERTOPS
Butcher Block, Michigan Maple
Block.............................................14
COVER
COVER PLATES
Lift Mechanism, Blum .................. 104
COVERS
Fluorescent Light, Hera ............... 183
Roller, Gundlach.......................... 204
CROSS
Dividers, Blum ............................. 144
Bread Drawer, Rev-A-Shelf .........143
DENTIL
Mouldings, White River ................165
Blum...............................................84
DESK
Drawer, Blum................................. 84
CROWN
Drawers, Custom Accents .............90
DESKTOP
Mouldings, White River........ 166–167
CROWN MOULDING
Installation Tools, Fastcap........... 232
CUSTOM
Drawer Boxes, Drawer Box
Specialties.................................. 179
Edge Profiles, Wilsonart .................. 7
CUSTOM ACCENTS
Bins, Media Storage .................... 155
Clips, Wire Channel..................... 131
Drawers, Desk ............................... 90
Drawers, Pencil ............................. 90
Grommets, Paper Slot ................. 254
Grommets, Wire .......................... 254
Racks, Media Storage ................. 155
Rails, Hanging File ........................ 92
Trays, Keyboard ............................ 90
CUSTOM COLOR
Punch Kits, Fastcap..................... 213
CUTLERY
Organizers, Blum................. 143, 149
Trays, Blum ................................. 149
Trays, Rev-A-Shelf ...................... 146
CUTLERY DRAWER SYSTEMS
Omega National........................... 147
CUTLERY TRAY
Drawer Inserts, Rev-A-Shelf........ 147
CUTTERS
Laminate Scoring, Gundlach ....... 204
CUTTING
Boards, Rev-A-Shelf.................... 145
CUTTING BOARD/KNIFE
Holders, Rev-A-Shelf........... 145, 147
Fasteners, Knape & Vogt.............130
DIMMERS
Rotary, Hera.................................190
Touch, Hera .................................188
DIRECT
Connectors, Hera.........................188
DISCS
Abrasive, Mirka ....................195–196
DISPLAY CASE
Light Fixtures, Hera......................182
DISPLAYS
Plate, Omega National.................159
DISTANCE
Bumpers, Blum ..............................87
Rings, Hera ..................................188
Spacers, Blum................................97
DIVIDERS
Basket, Rev-A-Shelf.....................149
Cross, Blum .................................144
Drawer, Blum ...............................143
Inside, Blum .................................144
Lateral, Blum................................144
Tray, Blum....................................149
Tray, Rev-A-Shelf ........................154
DOLLIES
Fastcap ........................................231
DOOR
Closing Systems, Blum ............97–99
Lift Systems, Blum ...............102–103
Magnets, Fastcap ........................221
Protectors, Blum ..........................254
DOOR CONTACT
Switches, Hera.............................190
DOOR MOUNT
Extenders, Rev-A-Shelf ...............140
D
COVER CAPS
COVER KITS
Metals, Chemetal .....................11–13
Metals, Wilsonart .............................8
DESIGN ELEMENT SETS
CROSS RAILS
Caps, Blum ....................................84
Caps, Fastcap..........................31–33
Hinge Cup, Blum............................97
Hinge, Blum ...................................97
Lift Mechanism, Blum...................104
DECORATIVE
DOOR MOUNTING KITS
Bin & Hamper, Rev-A-Shelf .........139
DOOR SLIDES
DECKING
Screws, QuickScrews.................. 131
Hinged, Knape & Vogt ...................87
DOORS
DECOR
Rings, Hera.................................. 188
iv
Tambour, Omega National...........158
INDEX
DOUBLE BALL
Catches, Pride Industrial..............191
DOWELS
Expanding, Blum..........................253
Expansion, Blum ..........................253
Press-In, Blum .............................253
DRAW
Bolts, QuickScrews ......................130
DRAWER
Assembly Systems, Blum ............211
Assembly Tools, Blum .................210
Attachment Sets, Blum ..................85
Boxes, Drawer Box Specialties....179
Bracket Sets, Blum ........................85
Bumpers, Blum ............................254
Corner Plates, Fastcap ................233
Cross Rails, Blum ..........................84
Dividers, Blum..............................143
End Caps, Blum .............................84
Followers, Knape & Vogt .............253
Front Pieces, Blum.........................84
Inserts, Omega National ..............146
Locks, CompX..............................193
Locks, Knape & Vogt ...................192
Openers, Blum ...............................80
Opening/Closing Systems, Blum ...85
Organizers, Blum .........................149
Profile Sets, Blum ....................82–83
Pulls, Knape & Vogt .......................65
Pulls, Pride Industrial .....................56
Runners, Blum .............68, 70, 78–79
Sides, Blum....................................77
Slides, Knape & Vogt .........67, 69–74
Slides, Pride Industrial ...................81
Slides, Siquar...........................69, 78
Tracks, Knape & Vogt ..................253
DRAWER ACCESSORIES
Blum...............................................78
DRAWER ASSEMBLY
Jigs, Blum ....................................211
Templates, Blum ..........................210
DRAWER BOX SPECIALTIES
Boxes, Drawer .............................179
DRAWER COMPONENTS
Omega National ...........................179
DRAWER FRONT
Adjusters, Blum............................253
Adjusting Screws,
QuickScrews ..............................125
Handles, Blum................................84
DRAWER GUIDE
Mounting Blocks, Fastcap............244
DRAWER INSERTS
Cutlery Tray, Rev-A-Shelf............ 147
Knife Block, Rev-A-Shelf ............. 147
Spice Tray, Omega National ....... 147
Spice Tray, Rev-A-Shelf .............. 147
DRAWER OPENER
Adapter Sets, Blum........................ 86
Drive Units, Blum........................... 86
Electrical Components, Blum ........ 86
D-SHAPED
Lazy Susans, Rev-A-Shelf ...........137
Shelf Sets, Rev-A-Shelf ...............137
Tray Sets, Rev-A-Shelf ................137
DUST
Masks, Fastcap....................235–236
DUSTER
Brushes, Gundlach ......................202
DRAWER OPENER SETS
E
Blum .............................................. 86
DRAWER PROFILE
Extensions, Blum........................... 83
DRAWER PULLS
Temporary, Fastcap .................... 250
DRAWER RUNNER
Sockets, Blum.................... 69, 78, 80
Spacers, Blum ............................. 255
DRAWER SIDE SETS
Blum .............................................. 81
DRAWER SLIDE
Brackets, Knape & Vogt ................ 69
Screws, QuickScrews.......... 125–126
DRAWER SYSTEMS
Blum .............................................. 81
Cabinet, Blum .......................... 74–75
DRAWERS
EDGE
Profiles, Wilsonart ............................7
Sanders, Fastcap.........................224
Trimmers, Fastcap .......................212
EDGEBANDING
Adhesives, Fastcap......................215
Melamine, Canplast .......................29
Peel and Stick, Fastcap .................30
PVC, Canplast .........................21–29
Wood Veneer, Veneer Solutions....38
EDGEBANDING & COVER CAP
Ordering Information,
Fastcap...................................34–35
EDGERS
Laminate, Gundlach.....................203
EDGES
Straight, Gundlach .......................208
Desk, Custom Accents .................. 90
Jewelry, Rev-A-Shelf ................... 148
Keyboard, Knape & Vogt ............... 90
Pencil, Custom Accents................. 90
DRILL
Bits, Blum .................................... 202
Bits, Hera..................................... 202
DRILL BITS
ELECTRICAL COMPONENTS
Drawer Opener, Blum ....................86
END
Blocks, White River......................171
END CAPS
Drawer, Blum .................................84
Tubing, Knape & Vogt..................114
ENTERTAINMENT CENTER
Flush Mount, Fastcap .................. 214
Layout, Fastcap ........................... 248
DRILLING
EXPANDING
Dowels, Blum ...............................253
Templates, Blum.................. 209–210
DRIVE
Bits, QuickScrews........................ 134
EXPANSION
Dowels, Blum ...............................253
Joints, SpaceBalls........................255
EXTENDERS
DRIVE UNITS
Drawer Opener, Blum.................... 86
Door Mount, Rev-A-Shelf.............140
EXTENSION
DRIVERS
Hanger Bolt, QuickScrews........... 134
Bars, QuickScrews.......................134
EXTENSION HANDLE
DROP-IN
Sinks, Karran ........................... 17–18
Rollers, Gundlach ........................203
EXTENSIONS
DROPS
v
Drawer Profile, Blum ......................83
I
N
D
E
X
INDEX
F
FACE FRAME/POCKET HOLE
Assembly Screws,
QuickScrews ..............................124
FAMOWOOD
Fillers, Wood ..................................48
Solvents .........................................48
FASTCAP
Adhesives ......................................45
Adhesives, Edgebanding .............215
Aprons, Ballistic ...........................237
Bags, Tool....................................246
Belts .............................................237
Blocks, Panel Assembly...............230
Bottles, Glue ................................234
Braces, Countertop ......109–110, 132
Braces, Telescoping ....219–220, 244
Caps, Caulking Gun.....................249
Caps, Cover .............................31–33
Chisels .........................................240
Clips, Finishing.............................223
Clips, Joist....................................248
Clips, Tape Measure....................227
Colorant Kits, Adhesive..................45
Corner Plates, Drawer .................233
Dollies ..........................................231
Drawer Pulls, Temporary .............250
Drill Bits, Flush Mount ..................214
Drill Bits, Layout ...........................248
Edgebanding, Peel and Stick.........30
Fillers, Wood ..................................46
Glasses, Safety............................238
Gloves, Work ...............................245
Glue, Wood ....................................47
Grips, Tool ...................................241
Hammers, Finish..........................251
Handles, Suction..........................229
Hats..............................................237
Holders, Bit ..................................249
Hoods, Saw..................................222
Installation Tools, Crown
Moulding.....................................232
Knives, Utility ...............................251
Leveling Systems, Laser..............217
Levels, Laser................................218
Lights, Cap...................................245
Magnets ...............................232, 252
Magnets, Door .............................221
Markers, Pattern ..........................250
Masks, Dust .........................235–236
Measures, Tape ...................225–226
Mortise Tools ...............................243
Mounting Blocks, Drawer
Guide..........................................244
Mounting Brackets, Tile Saw .......223
FASTCAP, CONTINUED
Mounts, Laser Level .................... 221
Nail & Staple Setters, Blind ......... 243
Nippers ........................................ 242
Ordering Information, Edgebanding
& Cover Cap .......................... 34–35
Organizers, Bit & Fastener .......... 247
Planes.......................................... 250
Punch Kits, Custom Color ........... 213
Rollers, Laminate......................... 216
Sanders, Edge............................. 224
Screws, Concrete ................ 110, 132
Screws, Power Head ................... 128
Scribing Tools.............................. 228
Shears, Power ............................. 242
Squares, Magnetic....................... 248
Stops, Cabinet Door ...................... 89
Tape, Layout................................ 214
Templates, Outlet ........................ 227
Trim Rings, Outlet.................. 89, 252
Trimmers, Edge ........................... 212
Trimmers, Flush Cut .................... 242
Wrist Straps, Magnetic ................ 233
FASTENERS
FINGER
Pulls, Knape & Vogt ...............65, 113
FINIALS
Split, White River .........................171
FINISH
Hammers, Fastcap.......................251
Washers, QuickScrews ................131
FINISHING
Clips, Fastcap ..............................223
Sheets, Mirka ...............................196
FIXING BRACKETS
Front, Blum ..................76–77, 81–84
Rear, Blum .........................82–83, 85
FLANGES
Tubing, Knape & Vogt..................114
FLUORESCENT
Bulbs, Hera ..................................184
Lights, Hera..................................183
Spotlights, Hera ...........................183
FLUORESCENT LIGHT
Covers, Hera................................183
Desktop, Knape & Vogt ............... 130
Joint, Knape & Vogt..................... 130
Tabletop, Knape & Vogt .............. 130
FEET
FLUSH CUT
Trimmers, Fastcap .......................242
FLUSH MOUNT
Drill Bits, Fastcap .........................214
Bun, Pride Industrial .................... 177
Bun, White River.......................... 177
Cabinet, White River.................... 176
Corner, White River ..................... 177
Pedestal, Pride Industrial............. 178
FOLDING
Squares, Gundlach ......................209
FOLLOWERS
Drawer, Knape & Vogt .................253
FORMWOOD
FENCE RAILS
Lazy Susan, Rev-A-Shelf ............ 137
Sheets, Veneer ........................36–38
FRAME KITS
FILE
Brushes, Gundlach ...................... 203
Handles, Gundlach ...................... 203
FILE DRAWER
FRAMES
Roller, Gundlach ..........................204
Organizers, Rev-A-Shelf.............. 148
Slides, Knape & Vogt..................... 73
FILE DRAWER SYSTEMS
Rev-A-Shelf ................................. 150
FILES
Laminate, Gundlach .................... 203
FILLER
Shelves, Rev-A-Shelf .................. 152
FREIZES
White River ..................................167
FRONT
Fixing Brackets,
Blum ...........................76–77, 81–84
Rails, Blum.....................................82
Stabilization Brackets, Blum ..........84
FRONT PIECES
Drawer, Blum .................................84
FILLER KITS
Laminate, Wilsonart....................... 42
FILLERS
Beaded/Fluted, Omega ............... 171
Wood, Famowood ......................... 48
Wood, Fastcap .............................. 46
vi
FULL CIRCLE
Lazy Susans,
Rev-A-Shelf ........................135, 137
FURNITURE
Locks, CompX..............................193
INDEX
G
GALLERY
Rail Sets, Blum ..............................77
Rods, Blum ....................................82
GALLEY
Rails, Omega National .................160
GARAGES
Appliance, Omega National .........158
GARMENT
Hooks, Knape & Vogt...................156
GATE
Latches, Knape & Vogt ................193
GAUGES
Marking, Blum ..............................253
GLASS DOOR
Tracks, Knape & Vogt ..................111
GLASS RETAINER
GUNDLACH, CONTINUED
Guns, Caulking ............................ 202
Handles, File................................ 203
Knives, Ward ............................... 202
Levels .......................................... 204
Lifters, Moulding .......................... 204
Lubricants ...................................... 48
Mallets, Rubber ........................... 208
Rollers, Extension Handle ........... 203
Rollers, Hand............................... 203
Rollers, Laminate......................... 203
Rules, Straight Edge.................... 208
Shears, Laminate ........................ 204
Slitters, Laminate......................... 204
Squares, Folding ......................... 209
Trimmers, Laminate..................... 204
T-Squares............................ 208–209
GUNS
Adhesive, Karran ................... 19, 202
Caulking, Gundlach ..................... 202
H
GLASSES
GLOVES
Work, Fastcap..............................245
GLUE
Bottles, Fastcap ...........................234
Wood, Fastcap...............................47
GRIPS
Tool, Fastcap ...............................241
GROMMETS
Paper Slot, Custom Accents ........254
Wire, Custom Accents .................254
GROOVE
Guides, Knape & Vogt .................112
GUIDES
Ball Bearing, Amana Tool ............201
Groove, Knape & Vogt .................112
GUNDLACH
Blades, Utility Knife ......................202
Bottles, Applicator ........................201
Brushes, Contact Cement............202
Brushes, Duster ...........................202
Brushes, File ................................203
Covers, Roller ..............................204
Cutters, Laminate Scoring ...........204
Edgers, Laminate.........................203
Edges, Straight ............................208
Files, Laminate.............................203
Frames, Roller .............................204
Brackets, Knape & Vogt...............113
Saddles, Knape & Vogt................107
Supports, Knape & Vogt ..............113
HARDWARE
Screws, QuickScrews ..........118–120
HARDWARE COLLECTIONS
Cabinet, Liberty ........................56–64
Showcase ................................49–55
HARDWARE SETS
Lazy Susan, Rev-A-Shelf.....135–136
HARDWIRE
Boxes, Hera .................................188
HARDWOOD
Assembly Screws,
QuickScrews ..............................121
Veneer Sheets, Formwood ......36–38
HATS
Fastcap ........................................237
HEADS
Clips, Knape & Vogt.....................131
Clips, Pride Industrial ...................131
Safety, Fastcap ............................238
HANGING ROD
HALF-MOON
Lazy Susans, Rev-A-Shelf........... 138
HALF-ROUND
Lineals, White River............. 165, 170
HALOGEN
Bulbs, Hera.................................. 187
Light Sets, Hera................... 185–187
Spotlights, Hera ................... 184–186
HAMMERS
Finish, Fastcap ............................ 251
HAMPERS
Pull-Out, Rev-A-Shelf .................. 142
Vanity, Rev-A-Shelf ..................... 142
HAND
Rollers, Gundlach ........................ 203
HANDLES
Drawer Front, Blum ....................... 84
File, Gundlach ............................. 203
Interior, Blum ................................. 82
Suction, Fastcap.......................... 229
HANDY BUTTON
Supports, Shelf ............................ 115
HANGER BOLT
Drivers, QuickScrews .................. 134
HANGING
Rail Sets, Blum .............................. 76
Rods, Knape & Vogt .................... 153
HANGING FILE
Rails, Custom Accents .................. 92
vii
Boring Machine, Blum..................211
HERA
Bits, Drill.......................................202
Blocks, Terminal ..........................190
Boxes, Hardwire...........................188
Bulbs, Fluorescent .......................184
Bulbs, Halogen.............................187
Bulbs, Xenon................................181
Cables, Connecting..............187–188
Cables, Power Supply..........188–189
Caps, Top ....................................190
Connectors, Direct .......................188
Covers, Fluorescent Light ............183
Dimmers, Rotary ..........................190
Dimmers, Touch...........................188
Housings, Light ............................183
Lamps, Arc ...................................187
Lenses, Spotlight .........................190
Light Fixtures, Display Case ........182
Light Fixtures, LED ......................182
Light Housing Accessories...........189
Light Sets, Halogen..............185–187
Lighting Systems, Shelf ...............183
Lights, Fluorescent.......................183
Lights, Undercabinet ............181, 186
Power Supplies, LED ...................189
Power Track Components ...........189
Rigs, Switch .................................190
Rings, Decor ................................188
Rings, Distance............................188
Rings, Spacer ..............................190
Saws, Hole...................................202
Spotlights, Fluorescent ................183
I
N
D
E
X
INDEX
HERA, CONTINUED
Spotlights, Halogen..............184–186
Spotlights, LED ....................181–182
Spotlights, Xenon.........................181
Switches, Door Contact ...............190
Switches, Rocker .........................189
Switches, Surface Mounted .........190
Transformers................................190
Wire Management
Components ...............................190
HIGH-PRESSURE
Laminates, Wilsonart ...................1–6
HOODS
JOHSONITE
Range, Omega National .............. 157
Saw, Fastcap............................... 222
HOOKS
Garment, Knape & Vogt .............. 156
Utility, Knape & Vogt.................... 156
HORIZONTAL
Profiles, Blum ................................ 86
HINGE CUP
Cover Caps, Blum..........................97
HINGE KITS
Pocket Door, Knape & Vogt ...........88
HINGE PLATES
Clip-On, Pride Industrial.........99–100
HINGED
Door Slides, Knape & Vogt ............87
HINGES
Clip Top, Blum .........................93–95
Clip-On, Pride Industrial.................99
Continuous, Terry Hinge
& Hardware ................................102
Institutional, Pride Industrial.........101
Institutional, Siquar ......................101
One Piece, Blum ............................97
Self-Closing, Pride Industrial........100
Self-Closing, Siquar .............100–101
Sink Front Tray,
Rev-A-Shelf ........................101, 139
Support, Knape & Vogt ................102
Two Piece, Blum ............................97
HOLDERS
Bit, Fastcap ..................................249
Bit, QuickScrews..........................134
Computer, Knape & Vogt ...............91
Cutting Board/Knife,
Rev-A-Shelf ........................145, 147
Knife, Blum...................................147
Label, Knape & Vogt ....................253
Plate, Blum...................................144
HOLE
Saws, Hera ..................................202
JOINTS
Expansion, SpaceBalls ................255
JOIST
Clips, Fastcap ..............................248
HOT MELT
Adhesives, Fastcap ....................... 48
K
HOUSINGS
Light, Hera ................................... 183
HINGE
Boring Bits, Amana Tool ..............201
Cover Caps, Blum..........................97
Mounting Plates, Blum .............96, 98
Pads, Marian, Inc. ........................254
Templates, Blum ..........................210
Bases, Wall ..........................255–256
JOINT
KARRAN
I
INSERT
Bit Kits, QuickScrews .................. 134
Knives, Amana Tool .................... 208
INSERTS
Drawer, Omega National ............. 146
Utensil Drawer, Blum................... 148
Utility Tray, Rev-A-Shelf .............. 146
Adhesives, Seam .....................19, 44
Guns, Adhesive......................19, 202
Sink Accessories............................19
Sinks, Drop-In ..........................17–18
Sinks, Undermount ..................18–19
KEYBOARD
Drawers, Knape & Vogt .................90
Shelves, Knape & Vogt ..................91
Trays, Custom Accents ..................90
Trays, Knape & Vogt......................90
KEYBOARD/MOUSE
Trays, Knape & Vogt......................90
INSIDE
Dividers, Blum ............................. 144
KEYS
Master, CompX ............................193
INSTALLATION
INSTALLATION TOOLS
Crown Moulding, Fastcap............ 232
INSTITUTIONAL
Hinges, Pride Industrial ............... 101
Hinges, Siquar ............................. 101
INTEGRATED
Sinks, Wilsonart............................. 15
INTERIOR
Handles, Blum ............................... 82
INTEX
Cloths, Wiping ............................. 253
IRONING
Boards, Rev-A-Shelf.................... 154
J
JEWELRY
Drawers, Rev-A-Shelf.................. 148
JIGS
Drawer Assembly, Blum .............. 211
Mounting Plate, Blum .................. 209
viii
KIDNEY-SHAPED
Lazy Susans, Rev-A-Shelf ...136–137
Shelf Sets, Rev-A-Shelf ...............137
KNAPE & VOGT
Bars, Towel ..................................153
Braces, Corner.............................253
Bracket Accessories ....................115
Brackets, Drawer Slide ..................69
Brackets, Hanging Rod ................113
Brackets, Mounting ..................67, 72
Brackets, Shelf.....................107–109
Brackets, Support ........................105
Bumpers, Sliding Door .................113
Carriers, Ball Bearing ...................112
Catches, Bullet.............................191
Channels, Sliding Door ................111
Clips, Glass Retainer ...................131
Clips, Mirror..................................130
Door Slides, Hinged .......................87
Drawers, Keyboard ........................90
End Caps, Tubing ........................114
Fasteners, Desktop......................130
Fasteners, Joint ...........................130
Fasteners, Tabletop .....................130
Flanges, Tubing ...........................114
Followers, Drawer ........................253
INDEX
KNAPE & VOGT, CONTINUED
Frame Kits, Sliding Door ..............111
Guides, Groove............................112
Guides, Sliding Door ....................111
Hinge Kits, Pocket Door.................88
Hinges, Support ...........................102
Holders, Computer.........................91
Holders, Label..............................253
Hooks, Garment...........................156
Hooks, Utility ................................156
Latches, Gate...............................193
Locks, Drawer ..............................192
Locks, Sliding Door ......................193
Mounting Brackets, Slide .............105
Nails, Shelf...........................105, 133
Pulls, Drawer..................................65
Pulls, Finger ...........................65, 113
Racks, Clothing............................152
Rests, Shelf..........................107, 109
Rods, Closet ................................113
Rods, Hanging .............................153
Rollers..........................................113
Rollers, Cassette............................88
Rollers, Sliding Door ....................113
Saddles, Hanging Rod .................107
Screws, Shelf Standard ...............133
Sheaves ...............................112–113
Shelves, Keyboard.........................91
Shoes, Sliding Door .....................112
Slides, Box & File Drawer ........72–73
Slides, Box Drawer ........................71
Slides, Drawer....................67, 69–74
Slides, File Drawer.........................73
Slides, Keyboard............................90
Slides, Pantry.................................71
Slides, Pencil Drawer.....................70
Slides, Pivot Door ..........................88
Slides, Pocket Door .......................87
Standards, Shelf ..................105–107
Supports, Hanging Rod................113
Supports, Pilaster Standard .........105
Supports, Shelf ....................114–115
Supports, Shelf & Rod .................109
Swivels, TV ....................................92
T-Guides, Sliding Door.................112
Track Kits, Sliding Door ...............111
Tracks, Drawer.............................253
Tracks, Glass Door ......................111
Tracks, Sliding Door.............111–112
Trays, Keyboard.............................90
Trays, Keyboard/Mouse.................90
Tubing, Steel........................113–114
KNIFE BLOCK
Drawer Inserts, Rev-A-Shelf ........147
KNIFE HINGE
KNIFE HOLDER SETS
Blum ............................................ 147
KNIVES
Insert, Amana Tool ...................... 208
Utility, Fastcap ............................. 251
Ward, Gundlach........................... 202
KNOB
KNOBS
White River .................................. 179
KNOCK-IN TOOLS
Blum ............................................ 210
L
LAZY SUSAN
Fence Rails, Rev-A-Shelf.............137
Hardware Sets,
Rev-A-Shelf ........................135–136
LAZY SUSANS
D-Shaped, Rev-A-Shelf ...............137
Full Circle, Rev-A-Shelf........135, 137
Half-Moon, Rev-A-Shelf ...............138
Kidney-Shaped,
Rev-A-Shelf ........................136–137
Pie-Cut, Rev-A-Shelf............136–137
LED
Light Fixtures, Hera......................182
Power Supplies, Hera ..................189
Spotlights, Hera ...................181–182
LEG
Levelers, Blum .............................254
LABEL
Holders, Knape & Vogt ................ 253
LAMI-LUBE
Lubricants, Aerosol........................ 44
LAMINATE
Edgers, Gundlach........................ 203
Files, Gundlach............................ 203
Filler Kits, Wilsonart....................... 42
Rollers, Fastcap........................... 216
Rollers, Gundlach ........................ 203
Shears, Gundlach........................ 204
Slitters, Gundlach ........................ 204
Trimmers, Gundlach .................... 204
LAMINATE SCORING
Cutters, Gundlach........................ 204
LEGS
Pride Industrial .....................177–178
LENSES
Spotlight, Hera .............................190
LEVELERS
Leg, Blum.....................................254
LEVELING SYSTEMS
Laser, Fastcap .............................217
LEVELS
Gundlach......................................204
Laser, Fastcap .............................218
LIBERTY
Hardware Collections,
Cabinet ...................................56–64
LIDS
LAMINATES
High-Pressure, Wilsonart............. 1–6
Waste Container, Rev-A-Shelf.....139
LIFT MECHANISM
LAMPS
Arc, Hera ..................................... 187
LANSEN
Sinks, Self-Rimming ...................... 15
Sinks, Undermount .................. 15–17
Cover Caps, Blum........................104
Cover Plates, Blum ......................104
LIFT MECHANISM SETS
Blum.....................................103–104
LIFT SYSTEMS
LASER
Leveling Systems, Fastcap.......... 217
Levels, Fastcap ........................... 218
Door, Blum ...........................102–103
LIFTERS
Moulding, Gundlach .....................204
LASER LEVEL
Mounts, Fastcap .......................... 221
LIFTS
Mixer/Appliance, Rev-A-Shelf ......154
LATCHES
Gate, Knape & Vogt..................... 193
Touch, Pride Industrial................. 191
LATERAL
LIGHT
Housings, Hera ............................183
LIGHT FIXTURES
Dividers, Blum ............................. 144
LAYOUT
Drill Bits, Fastcap......................... 248
Tape, Fastcap.............................. 214
ix
Display Case, Hera ......................182
LED, Hera ....................................182
LIGHT HOUSING ACCESSORIES
Hera .............................................189
I
N
D
E
X
INDEX
LIGHT SETS
MASTER
Halogen, Hera......................185–187
LIGHTING SYSTEMS
Shelf, Hera ...................................183
LIGHTS
MOUNTING BLOCKS
Keys, CompX............................... 193
MEASURES
Tape, Fastcap...................... 225–226
MEDALLIONS
Cap, Fastcap................................245
Fluorescent, Hera ........................183
Undercabinet, Hera..............181, 186
LINEALS
Half-Round, White River ......165, 170
LINERS
Range Hood, Omega National.....157
LITTLE RED CAP
Caps, Sealing.........................44, 208
LOCKING DEVICES
Blum...............................................80
LOCKS
Cam, CompX ...............................192
Chest/Lid, CompX........................192
Drawer, CompX ...........................193
Furniture, CompX.........................193
LOXCREEN
Mouldings, Metal..........................255
LUBRICANTS
Aerosol, Lami-Lube........................44
Gundlach........................................48
M
MEDIA STORAGE
Bins, Custom Accents ................. 155
Racks, Custom Accents .............. 155
Drawer Guide, Fastcap ................244
Rear, Blum .....................................80
MOUNTING BRACKETS
Rear, Blum .....................................80
Slide, Knape & Vogt.....................105
Tile Saw, Fastcap ........................223
MOUNTING PLATE
Jigs, Blum ....................................209
MOUNTING PLATES
MELAMINE
Adhesives, Wilsonart ..................... 40
Edgebanding, Canplast ................. 29
METAL
Mouldings, Afco ........................... 255
Mouldings, Loxcreen ................... 255
Cam, Blum .....................................96
Hinge, Blum .............................96, 98
Wing, Blum.....................................96
MOUNTS
Laser Level, Fastcap....................221
METALS
Decorative, Chemetal .............. 11–13
Decorative, Wilsonart ...................... 8
N
MICHIGAN MAPLE BLOCK
Countertops, Butcher Block........... 14
MIRKA
NAIL & STAPLE SETTERS
Blind, Fastcap ..............................243
Belts, Abrasive..................... 197–199
Discs, Abrasive.................... 195–196
Pads, Abrasive ............................ 195
Pads, Backup .............................. 196
Pads, Scuff .................................. 195
Rolls, Abrasive............................. 196
Sheets, Finishing ......................... 196
Sponges, Abrasive ...................... 196
MIRROR
Clips, Knape & Vogt .................... 130
NAILS
Shelf, Knape & Vogt.............105, 133
NIPPERS
Fastcap ........................................242
NUTSETTERS
Magnetic, QuickScrews ...............134
O
MIXER/APPLIANCE
MACHINE
MAGNETIC
Catches, Pride Industrial..............191
Nutsetters, QuickScrews..............134
Squares, Fastcap.........................248
Wrist Straps, Fastcap...................233
MAGNETS
Door, Fastcap ..............................221
Fastcap ................................232, 252
MALLETS
Rubber, Gundlach........................208
MARIAN, INC.
Pads, Hinge .................................254
MARKERS
Pattern, Fastcap...........................250
MARKING
Gauges, Blum ..............................253
MASKS
Dust, Fastcap.......................235–236
Lifts, Rev-A-Shelf......................... 154
MODILLION
Blocks, White River ..................... 165
MONTEREY SHELF
Standards, Shelf .......................... 106
MORTISE TOOLS
Fastcap........................................ 243
MOULDING
Lifters, Gundlach ......................... 204
MOULDINGS
Crown, White River.............. 166–167
Dentil, White River....................... 165
Metal, Afco................................... 255
Metal, Loxcreen ........................... 255
Panel, White River....................... 166
Rope, Omega National ................ 165
Rope, White River ....................... 165
White River .................................. 166
MOUNTING
Brackets, Knape & Vogt .......... 67, 72
x
OMEGA NATIONAL
Blowers, Range Hood ..................157
Brackets, Support ........................160
Caps, Beaded/Fluted ...................172
Cutlery Drawer Systems ..............147
Displays, Plate .............................159
Doors, Tambour ...........................158
Drawer Components ....................179
Drawer Inserts, Spice Tray ..........147
Fillers, Beaded/Fluted ..................171
Garages, Appliance .....................158
Hoods, Range ..............................157
Inserts, Drawer.............................146
Liners, Range Hood .....................157
Mouldings, Dentil .........................165
Mouldings, Rope ..........................165
Organizers, Tray ..........................154
Pantry Systems ....................150–151
Pilaster Kits ..................................152
Racks, Spice ................................145
Racks, Stemware.........................159
INDEX
OMEGA NATIONAL, CONTINUED
Racks, Wine.........................158–159
Rails, Galley.................................160
Strips, Trim...................................165
Valances ......................................160
Ventilation Systems, Range
Hood...................................157–158
ONE PIECE
PANTRY SYSTEMS
Omega National................... 150–151
Rev-A-Shelf ................................. 151
PAPER SLOT
ONLAYS
PARTING
OPENERS
Markers, Fastcap......................... 250
Feet, Pride Industrial ................... 178
PEEL AND STICK
Drawer, Blum ...........................80, 86
OPENING/CLOSING SYSTEMS
Drawer, Blum .................................85
ORGANIZERS
Edgebanding, Fastcap................... 30
PENCIL
Drawers, Custom Accents ............. 90
PENCIL DRAWER
Base Cabinet, Rev-A-Shelf ..........151
Bit & Fastener, Fastcap ...............247
Blind Corner, Rev-A-Shelf............150
Bottle, Blum..................................144
Cookware, Rev-A-Shelf ...............150
Cosmetics, Rev-A-Shelf...............148
Cutlery, Blum .......................143, 149
Drawer, Blum ...............................149
Drawer, Rev-A-Shelf ....................146
Entertainment Center,
Rev-A-Shelf ................................156
File Drawer, Rev-A-Shelf .............148
Scarf/Tie/Belt, Rev-A-Shelf ..........153
Tray, Omega National..................154
Utensil, Blum........................143, 148
Vanity, Rev-A-Shelf......................152
Wall Cabinet, Rev-A-Shelf ...........151
OSI
PIE-CUT
Lazy Susans, Rev-A-Shelf... 136–137
PILASTER KITS
Omega National........................... 152
PILASTER STANDARD
Supports, Knape & Vogt .............. 105
PIVOT DOOR
PLANES
Fastcap........................................ 250
PLATE
Displays, Omega National ........... 159
Holders, Blum .............................. 144
PLATES
Caulk, Adhesive .............................44
OUTLET
Adapter, Blum.................... 96, 98–99
PLYNTHS
Templates, Fastcap .....................227
Trim Rings, Fastcap...............89, 252
White River .................................. 171
PADS
Abrasive, Mirka ............................195
Backup, Mirka ..............................196
Bumper, Pride Industrial ..............254
Hinge, Marian, Inc........................254
Scuff, Mirka ..................................195
PANEL
PANEL ASSEMBLY
Blocks, Fastcap............................230
PANTRY
PRIDE INDUSTRIAL
Catches, Double Ball ...................191
Catches, Magnetic .......................191
Clips, Glass Retainer ...................131
Corbels.................................161–164
Feet, Bun .....................................177
Feet, Pedestal..............................178
Hinge Plates, Clip-On ............99–100
Hinges, Clip-On..............................99
Hinges, Institutional......................101
Hinges, Self-Closing ....................100
Latches, Touch ............................191
Legs .....................................177–178
Onlays..........................................176
Pads, Bumper ..............................254
Posts ....................................167–169
Pulls, Drawer..................................56
Rods, Closet ................................114
Rosettes.......................................172
Slides, Drawer................................81
Supports, Shelf ....................114–115
PROFILE EXTENSIONS
Drawer, Blum .................................83
PROFILE SETS
Drawer, Blum ...........................82–83
PROFILES
Adapter, Blum ..............................144
Edge, Wilsonart................................7
Horizontal, Blum.............................86
Vertical, Blum.................................86
PROTECTALL
Cleaners, Aerosol ..........................44
POCKET DOOR
P
PRESS-IN
Dowels, Blum ...............................253
Strips, White River....................... 167
PEDESTAL
Pride Industrial .............................176
Cables, Hera ........................188–189
POWER TRACK COMPONENTS
Hera .............................................189
Grommets, Custom Accents........ 254
PATTERN
Hinges, Blum..................................97
POWER SUPPLY
Hinge Kits, Knape & Vogt .............. 88
POLYURETHANE
Bumpers, Bumper Specialties ..... 253
PROTECTORS
Door, Blum ...................................254
PULL-DOWN
Shelving Systems, Rev-A-Shelf ...154
PULL-OUT
POSTS
Corner, White River ..................... 169
Pride Industrial..................... 167–169
POWER
Shears, Fastcap .......................... 242
POWER HEAD
Screws, Fastcap .......................... 128
POWER SUPPLIES
LED, Hera.................................... 189
xi
Baskets, Rev-A-Shelf...........142, 149
Hampers, Rev-A-Shelf .................142
Shelving Systems, Rev-A-Shelf ...151
Wire Baskets, Rev-A-Shelf ..........150
PULLS
Drawer, Knape & Vogt ...................65
Drawer, Pride Industrial .................56
Finger, Knape & Vogt.............65, 113
White River ..................................179
I
N
D
E
X
INDEX
PUNCH KITS
RAILS
Custom Color, Fastcap ................213
PVA
Adhesives, Wilsonart ...............40–41
PVC
Edgebanding, Canplast............21–29
REV-A-SHELF, CONTINUED
Front, Blum .................................... 82
Galley, Omega National .............. 160
Hanging File, Custom Accents ...... 92
Shoe, Rev-A-Shelf....................... 153
RANGE
Hoods, Omega National .............. 157
RANGE HOOD
Q
QUICKSCREWS
Adjusting Screws, Drawer
Front ...........................................125
Bars, Extension............................134
Bit Kits, Insert...............................134
Bits, Drive.....................................134
Bits, Insert ....................................134
Bits, Power...................................133
Bits, Step Drill ..............................202
Bolts, Draw...................................130
Drivers, Hanger Bolt.....................134
Holders, Bit ..................................134
Nutsetters, Magnetic ....................134
Screws .........................................117
Screws, Assembly................121–124
Screws, Cabinet Installation.........126
Screws, Compact Hinge ..............118
Screws, Connecting .....................126
Screws, Decking ..........................131
Screws, Drawer Slide...........125–126
Screws, Hardware................118–120
Screws, Installation ......................127
Screws, Knife Hinge.....................118
Screws, Knob...............................129
Screws, Machine..........................129
Screws, Wood..............................117
Washers, Finish ...........................131
R
RACKS
Clothing, Knape & Vogt................152
Clothing, Rev-A-Shelf ..................153
Media Storage, Custom
Accents.......................................155
Spice, Omega National ................145
Spice, Rev-A-Shelf.......................145
Stemware, Omega National.........159
Stemware, Rev-A-Shelf ...............155
Tie/Belt, Rev-A-Shelf ...................153
Wine, Omega National.........158–159
RAIL SETS
Gallery, Blum .................................77
Hanging, Blum ...............................76
Blowers, Omega National............ 157
Liners, Omega National............... 157
Ventilation Systems, Omega
National.............................. 157–158
RATTAN
Baskets, Rev-A-Shelf .................. 154
REAR
Fixing Brackets, Blum........ 82–83, 85
Mounting Blocks, Blum .................. 80
Mounting Brackets, Blum............... 80
REAR MOUNT
Sockets, Siquar ............................. 70
RESTS
Shelf, Knape & Vogt ............ 107, 109
REV-A-SHELF
Bars, Towel.................................. 153
Baskets, Pull-Out................. 142, 149
Baskets, Rattan ........................... 154
Baskets, Undersink...................... 150
Baskets, Wire .............................. 149
Boards, Cutting............................ 145
Boards, Ironing ............................ 154
Clips, Shelf .................................. 115
Containers, Waste ............... 139–142
Cover Kits, Bread Drawer............ 143
Dividers, Basket........................... 149
Dividers, Tray .............................. 154
Door Mounting Kits, Bin
& Hamper................................... 139
Drawer Inserts, Cutlery Tray........ 147
Drawer Inserts, Knife Block ......... 147
Drawer Inserts, Spice Tray .......... 147
Drawers, Jewelry ......................... 148
Extenders, Door Mount................ 140
Fence Rails, Lazy Susan............. 137
File Drawer Systems ................... 150
Hampers, Pull-Out ....................... 142
Hampers, Vanity .......................... 142
Hardware Sets, Lazy
Susan................................. 135–136
Hinges, Sink Front Tray....... 101, 139
Holders, Cutting
Board/Knife ........................ 145, 147
Inserts, Utility Tray....................... 146
Lazy Susans, D-Shaped.............. 137
Lazy Susans, Full Circle ...... 135, 137
Lazy Susans, Half-Moon ............. 138
xii
Lazy Susans,
Kidney-Shaped...................136–137
Lazy Susans, Pie-Cut ..........136–137
Lids, Waste Container..................139
Lifts, Mixer/Appliance...................154
Organizers, Base Cabinet............151
Organizers, Blind Corner .............150
Organizers, Cookware .................150
Organizers, Cosmetics.................148
Organizers, Drawer......................146
Organizers, Entertainment
Center.........................................156
Organizers, File Drawer ...............148
Organizers, Scarf/Tie/Belt............153
Organizers, Vanity .......................152
Organizers, Wall Cabinet .............151
Pantry Systems ............................151
Racks, Clothing............................153
Racks, Spice ................................145
Racks, Stemware.........................155
Racks, Tie/Belt.............................153
Rails, Shoe...................................153
Security Systems, Cabinet...........191
Shelf Sets, D-Shaped ..................137
Shelf Sets, Kidney-Shaped ..........137
Shelves, Filler ..............................152
Shelves, Storage..........................145
Shelving Systems, Pull-Down ......154
Shelving Systems, Pull-Out .........151
Tray Kits, Rolling..........................146
Tray Sets, D-Shaped ...................137
Trays, Cutlery...............................146
Trays, Sink Front..........................139
Trays, Tip-Out ..............................138
Trays, Utility .................................146
Wire Baskets, Pull-Out.................150
RIGS
Switch, Hera.................................190
RINGS
Decor, Hera..................................188
Distance, Hera .............................188
Spacer, Hera................................190
ROCKER
Switches, Hera.............................189
RODS
Closet, Knape & Vogt...................113
Closet, Pride Industrial.................114
Gallery, Blum .................................82
Hanging, Knape & Vogt ...............153
ROLLER
Covers, Gundlach ........................204
Frames, Gundlach .......................204
ROLLERS
Cassette, Knape & Vogt.................88
Extension Handle, Gundlach .......203
Hand, Gundlach ...........................203
INDEX
ROLLERS, CONTINUED
Knape & Vogt...............................113
Laminate, Fastcap .......................216
ROLLING
Tray Kits, Rev-A-Shelf .................146
ROLLS
Abrasive, Mirka ............................196
ROPE
Mouldings, Omega National.........165
ROSETTES
Pride Industrial .............................172
White River ..........................172–173
ROTARY
Dimmers, Hera.............................190
ROUTER
Bits, Amana Tool..................205–208
RUBBER
Mallets, Gundlach ........................208
RULES
Straight Edge, Gundlach..............208
RUNNERS
Drawer, Blum ...............68, 70, 78–79
S
S. PARKER HARDWARE
Bar Rail Components...................114
SADDLES
SAFETY
Glasses, Fastcap .........................238
SANDERS
Edge, Fastcap..............................224
SAW
Hoods, Fastcap............................222
SAWS
Hole, Hera....................................202
SCARF/TIE/BELT
SCREWDRIVERS
Blum.............................................208
SCREWS
Assembly, QuickScrews ......121–124
Cabinet Installation,
QuickScrews ..............................126
Compact Hinge, QuickScrews .....118
Concrete, Fastcap................110, 132
SCREWS, CONTINUED
Connecting, QuickScrews ........... 126
Decking, QuickScrews................. 131
Drawer Slide,
QuickScrews ...................... 125–126
Hardware, QuickScrews ...... 118–120
Installation, QuickScrews ............ 127
Knife Hinge, QuickScrews ........... 118
Knob, QuickScrews ..................... 129
Machine, QuickScrews ................ 129
Power Head, Fastcap .................. 128
QuickScrews................................ 117
Shelf Standard, Knape & Vogt..... 133
System, Blum .............................. 126
Twin Application, Blum ................ 130
Wood, QuickScrews .................... 117
SCRIBING TOOLS
Fastcap........................................ 228
SCROLLS
SHELF, CONTINUED
Lighting Systems, Hera................183
Nails, Knape & Vogt.............105, 133
Rests, Knape & Vogt............107, 109
Standards, Knape & Vogt ....105–107
Standards, Monterey Shelf ..........106
Supports, Bainbridge
Manufacturing.............................115
Supports, Blum ............................115
Supports, Handy Button...............115
Supports, Knape & Vogt ......114–115
Supports, Pride Industrial.....114–115
SHELF & ROD
Supports, Knape & Vogt ..............109
SHELF SETS
D-Shaped, Rev-A-Shelf ...............137
Kidney-Shaped, Rev-A-Shelf .......137
SHELF STANDARD
Screws, Knape & Vogt .................133
SCUFF
Pads, Mirka.................................. 195
SEALANTS
Silicone, Tec .................................. 41
SEALING
Caps, Little Red Cap ............. 44, 208
SEAM
SHELVES
Filler, Rev-A-Shelf........................152
Keyboard, Knape & Vogt ...............91
Storage, Rev-A-Shelf ...................145
SHELVING SYSTEMS
Pull-Down, Rev-A-Shelf ...............154
Pull-Out, Rev-A-Shelf...................151
SHOE
Adhesives, Karran ................... 19, 44
SECURITY SYSTEMS
Cabinet, Rev-A-Shelf................... 191
SELF-CLOSING
Hinges, Pride Industrial ............... 100
Hinges, Siquar ..................... 100–101
SELF-RIMMING
Sinks, Lansen ................................ 15
SENSORS
Rails, Rev-A-Shelf........................153
SHOES
SHOWCASE
Hardware Collections ...............49–55
SIDE
Spacers, Blum..............................255
SIDES
Drawer, Blum .................................77
Vibration, Blum .............................. 87
SETTERS
SILICONE
Sealants, Tec .................................41
Nail & Staple, Fastcap ................. 243
SHEARS
Power, Fastcap............................ 242
SHEAVES
SINK ACCESSORIES
Karran ............................................19
Wilsonart ........................................15
SINK FRONT
Trays, Rev-A-Shelf.......................139
Knape & Vogt ...................... 112–113
SHEETS
SINK FRONT TRAY
Hinges, Rev-A-Shelf ............101, 139
Finishing, Mirka ........................... 196
Veneer, Chemetal.......................... 14
Veneer, Formwood .................. 36–38
SHELF
Brackets, Knape & Vogt ...... 107–109
Clips, Rev-A-Shelf ....................... 115
xiii
SINKS
Drop-In, Karran ........................17–18
Integrated, Wilsonart......................15
Self-Rimming, Lansen....................15
Undermount, Karran ................18–19
Undermount, Lansen ...............15–17
I
N
D
E
X
INDEX
SIQUAR
Hinges, Institutional......................101
Hinges, Self-Closing ............100–101
Slides, Drawer..........................69, 78
Sockets, Rear Mount .....................70
SLIDE
Mounting Brackets, Knape
& Vogt.........................................105
SLIDE-AWAY MFG.
Containers, Waste .......................141
SLIDES
Box & File Drawer, Knape
& Vogt.....................................72–73
Box Drawer, Knape & Vogt ............71
Drawer, Knape & Vogt .......67, 69–74
Drawer, Pride Industrial .................81
Drawer, Siquar .........................69, 78
File Drawer, Knape & Vogt ............73
Keyboard, Knape & Vogt ...............90
Pantry, Knape & Vogt ....................71
Pencil Drawer, Knape & Vogt ........70
Pivot Door, Knape & Vogt ..............88
Pocket Door, Knape & Vogt ...........87
SLIDING DOOR
Bumpers, Knape & Vogt ..............113
Channels, Knape & Vogt..............111
Frame Kits, Knape & Vogt ...........111
Guides, Knape & Vogt .................111
Locks, Knape & Vogt ...................193
Rollers, Knape & Vogt..................113
Shoes, Knape & Vogt...................112
T-Guides, Knape & Vogt ..............112
Track Kits, Knape & Vogt.............111
Tracks, Knape & Vogt ..........111–112
SLITTERS
SOCKETS
Bainbridge Manufacturing ..............72
Drawer Runner, Blum ........69, 78, 80
Rear Mount, Siquar........................70
SOLID SURFACE PRODUCTS
Wilsonart ....................................9–10
SOLVENTS
Adhesive, Wilsonart .......................40
Famowood .....................................48
SPACEBALLS
Joints, Expansion.........................255
SPACER
Rings, Hera ..................................190
Wedges, Blum................................95
SPACERS
Cabinet Profile, Blum ...................255
Distance, Blum...............................97
Drawer Runner, Blum ..................255
Side, Blum....................................255
SPICE
STRAIGHT EDGE
Racks, Omega National............... 145
Racks, Rev-A-Shelf ..................... 145
Trays, Blum ................................. 147
SPICE TRAY
Drawer Inserts, Omega
National...................................... 147
Drawer Inserts, Rev-A-Shelf........ 147
SPICE TRAY SETS
Blum ............................................ 144
SPLICERS
White River .................................. 171
SPLIT
Finials, White River...................... 171
SPONGES
Abrasive, Mirka............................ 196
SPOTLIGHT
Lenses, Hera ............................... 190
SPOTLIGHTS
Fluorescent, Hera ........................ 183
Halogen, Hera ..................... 184–186
LED, Hera............................ 181–182
Xenon, Hera ................................ 181
SPRAY EQUIPMENT
Adhesive, Wilsonart....................... 40
SPRING-LOADED
Connectors, Blum ........................ 149
SQUARES
Rules, Gundlach ..........................208
STRIPS
Parting, White River .....................167
Trim, Omega National ..................165
SUCTION
Handles, Fastcap .........................229
SUPPORT
Brackets, Knape & Vogt...............105
Brackets, Omega National ...........160
Hinges, Knape & Vogt..................102
SUPPORTS
Corner, Blum..................................77
Pilaster Standard, Knape
& Vogt.........................................105
Shelf & Rod, Knape & Vogt..........109
Shelf, Bainbridge
Manufacturing.............................115
Shelf, Blum...................................115
Shelf, Handy Button .....................115
Shelf, Knape & Vogt.............114–115
Shelf, Pride Industrial ...........114–115
SURFACE MOUNTED
Switches, Hera.............................190
SWAGS
Carved, White River.....................176
SWICHES
Rocker, Hera................................189
Folding, Gundlach ....................... 209
Magnetic, Fastcap ....................... 248
STABILIZATION BRACKETS
Front, Blum .................................... 84
STABILIZER SETS
Blum .............................................. 82
STANDARDS
SWITCH
Rigs, Hera ....................................190
SWITCHES
Door Contact, Hera ......................190
Surface Mounted, Hera................190
SWIVELS
TV, Knape & Vogt ..........................92
Shelf, Knape & Vogt ............ 105–107
Shelf, Monterey Shelf .................. 106
SYSTEM
Screws, Blum ...............................126
STEEL
Tubing, Knape & Vogt ......... 113–114
T
STEMWARE
Racks, Omega National............... 159
Racks, Rev-A-Shelf ..................... 155
TABLETOP
STEP DRILL
TAMBOUR
Doors, Omega National ...............158
STOPS
Cabinet Door, Fastcap................... 89
STORAGE
Shelves, Rev-A-Shelf .................. 145
TAPE
Layout, Fastcap ...........................214
Measures, Fastcap ..............225–226
TAPE MEASURE
STRAIGHT
Edges, Gundlach ......................... 208
xiv
Clips, Fastcap ..............................227
INDEX
TEC
Sealants, Silicone ..........................41
TELESCOPING
Braces, Fastcap ...........219–220, 244
TEMPLATES
Boring, Blum ................................209
Box System, Blum........................209
Cabinet Profile, Blum ...................210
Drawer Assembly, Blum...............210
Drilling, Blum........................209–210
Hinge, Blum .................................210
Outlet, Fastcap.............................227
TEMPORARY
Drawer Pulls, Fastcap..................250
TERMINAL
Blocks, Hera.................................190
TERRY HINGE & HARDWARE
Hinges, Continuous......................102
T-GUIDES
TIE/BELT
Racks, Rev-A-Shelf......................153
TILE SAW
Mounting Brackets, Fastcap ........223
TIP-OUT
Trays, Rev-A-Shelf.......................138
TOOL
Bags, Fastcap ..............................246
Grips, Fastcap..............................241
TOP
Brackets, Blum...............................87
Caps, Hera...................................190
TOUCH
Dimmers, Hera.............................188
Latches, Pride Industrial ..............191
TOWEL
Bars, Knape & Vogt .....................153
Bars, Rev-A-Shelf ........................153
TRAY KITS
UTENSIL
Rolling, Rev-A-Shelf .................... 146
TRAY SETS
D-Shaped, Rev-A-Shelf ............... 137
TRAYS
Cutlery, Blum ............................... 149
Cutlery, Rev-A-Shelf.................... 146
Keyboard, Custom Accents ........... 90
Keyboard, Knape & Vogt ............... 90
Keyboard/Mouse, Knape & Vogt ... 90
Sink Front, Rev-A-Shelf............... 139
Spice, Blum ................................. 147
Tip-Out, Rev-A-Shelf ................... 138
Utility, Rev-A-Shelf ...................... 146
TRAY
Dividers, Blum..............................149
Dividers, Rev-A-Shelf...................154
Organizers, Omega National .......154
UTILITY KNIFE
Blades, Gundlach.........................202
UTILITY TRAY
Inserts, Rev-A-Shelf.....................146
V
Sheets, Veneer.............................. 14
TRIM
VALANCES
Strips, Omega National ............... 165
TRIM RINGS
Omega National ...........................160
VANITY
Outlet, Fastcap ...................... 89, 252
TRIMMERS
Edge, Fastcap ............................. 212
Flush Cut, Fastcap ...................... 242
T-SQUARES
Hampers, Rev-A-Shelf .................142
VENEER
Sheets, Chemetal ..........................14
Sheets, Formwood...................36–38
VENEER SOLUTIONS
Gundlach ............................. 208–209
TUBING
Edgebanding, Wood Veneer..........38
VENTILATION SYSTEMS
End Caps, Knape & Vogt............. 114
Flanges, Knape & Vogt................ 114
Steel, Knape & Vogt ............ 113–114
TURNED
Capitals, White River ................... 170
TV
Swivels, Knape & Vogt .................. 92
Range Hood, Omega
National ..............................157–158
VERTICAL
Profiles, Blum.................................86
VIBRATION
Sensors, Blum................................87
TWIN APPLICATION
W
Screws, Blum............................... 130
TWO PIECE
Hinges, Blum ................................. 97
U
TRACKS
Hera .............................................190
Hooks, Knape & Vogt...................156
Knives, Fastcap ...........................251
Trays, Rev-A-Shelf.......................146
TREEFROG
TRANSFORMERS
Inserts, Blum ................................148
UTILITY
TRACK KITS
Glass Door, Knape & Vogt...........111
Sliding Door, Knape
& Vogt.................................111–112
Organizers, Blum .................143, 148
UTENSIL DRAWER
WALL
Bases, Johnsonite................255–256
Brackets, White River ..................160
WALL CABINET
UNDERCABINET
Lights, Hera ......................... 181, 186
UNDERMOUNT
WARD
Knives, Gundlach.........................202
WASHERS
Sinks, Karran ........................... 18–19
Sinks, Lansen .......................... 15–17
UNDERSINK
UNIVERSAL
Finish, QuickScrews ....................131
WASTE
Containers, Rev-A-Shelf ......139–142
Containers, Slide-Away Mfg.........141
WASTE CONTAINER
Bracket Sets, Blum ........................ 85
xv
Lids, Rev-A-Shelf .........................139
I
N
D
E
X
INDEX
WEDGES
Spacer, Blum .................................95
WHITE RIVER
Blocks, End ..................................171
Blocks, Modillion ..........................165
Brackets, Wall ..............................160
Buttons.........................................173
Capitals ........................................170
Capitals, Carved ..........................170
Capitals, Turned...........................170
Centers, Carved...................173–174
Corbels.................................163–164
Corbels, Carved ...................160–164
Corners, Carved...........................174
Drops, Carved......................174–175
Feet, Bun .....................................177
Feet, Cabinet ...............................176
Feet, Corner.................................177
Finials, Split..................................171
Friezes .........................................167
Knobs...........................................179
Lineals, Half-Round .............165, 170
Medallions, Carved ......................175
Mouldings.....................................166
Mouldings, Crown ................166–167
Mouldings, Panel .........................166
Mouldings, Rope ..........................165
Plynths .........................................171
Plynths, Carved............................171
Posts, Corner ...............................169
Pulls .............................................179
WHITE RIVER, CONTINUED
Rosettes .............................. 172–173
Scrolls, Carved .................... 175–176
Splicers........................................ 171
Strips, Parting .............................. 167
Swags, Carved ............................ 176
WILSONART
Adhesives, Contact.................. 39–40
Adhesives, Melamine .................... 40
Adhesives, PVA....................... 40–41
Caulk, Color Matched .................... 43
Cleaners, Adhesive ....................... 40
Filler Kits, Laminate ....................... 42
Laminates, High-Pressure ........... 1–6
Metals, Decorative........................... 8
Profiles, Edge .................................. 7
Sink Accessories ........................... 15
Sinks, Integrated............................ 15
Solid Surface Products .............. 9–10
Solvents, Adhesive ........................ 40
Spray Equipment, Adhesive .......... 40
WIRE BASKETS
Pull-Out, Rev-A-Shelf...................150
WIRE CHANNEL
Clips, Custom Accents .................131
WIRE MANAGEMENT
COMPONENTS
Hera .............................................190
WOOD
Fillers, Famowood..........................48
Fillers, Fastcap...............................46
Glue, Fastcap.................................47
WOOD VENEER
Edgebanding, Veneer Solutions ....38
WOODFOLD MARCO
Breadboards ................................160
WORK
Gloves, Fastcap ...........................245
WRIST STRAPS
WINE
Racks, Omega National....... 158–159
Magnetic, Fastcap........................233
WING
Mounting Plates, Blum................... 96
X
WIPING
Cloths, Intex................................. 253
WIRE
Grommets, Custom Accents........ 254
xvi
XENON
Bulbs, Hera ..................................181
Spotlights, Hera ...........................181

Cabinet Hardware Collections

Transcription

Similar documents

Lazy Susan Technical Specifications

Section P - Fasteners - Würth Baer Supply Company