Fittings, Tubing and Accessories

Transcription

INDUSTRIAL PNEUMATICS
Pneumatic Accessories
strial
u
d
n
I
ised ics
m
o
t
s
Cu
mat
Pneu
Pneumatic Accessories
Overview
Contents
Check Valves
Pages 3–21
–In-line
Check valves Series RV.....................................................................................................
Check Valves Series RV9..................................................................................................
Quick exhaust valves Series SV.....................................................................................
Throttle check valves Series DRV...................................................................................
Throttle check valves Series DRV, plastic version......................................................
4
5
6
7–9
10
–Screw-in
Check valves Series ERV................................................................................................. 11, 12
Throttle check valves Series EDRV, SEDRV................................................................ 13–19
Throttle check valves Series EDRVK, EDRV, plastic................................................... 20, 21
Flow Control Valves
Pages 23–30
–In-line
Flow control valves Series DV......................................................................................... 24, 25
–Screw-in
Flow control valves Series EDV, SEDV.......................................................................... 26, 27
Flow control valves Series SEDV.................................................................................... 28, 29
Exhaust throttle valves Series DVE................................................................................ 30
2
Special Valves
Pages 31–42
AND valves Series AND8.................................................................................................
Shuttle valves Series OR8................................................................................................
Timer Series T3P10.............................................................................................................
2/2 way screw-in valves (check valves) Series EVP..................................................
3/2 way hollow screw valves Series EVP......................................................................
Miniature screw-in pressure regulators Series HMR, HMRS....................................
Relief valves Series USV...................................................................................................
32
33
34,
36,
38,
40,
42
Silencer, Strainers, Screw-In Sieves
Pages 43–47
Exhaust Silencers (sintered metal) Series D1, D1K....................................................
Exhaust Silencers (plastic) Series D1...K.......................................................................
Strainers Series SFS...........................................................................................................
Screw-In Sieves Series SB...............................................................................................
44
45
46
47
Pressure Switches
Pages 47–55
Pressure
Pressure
Pressure
Pressure
48
49
50, 51
52–55
switches, pneumatic, screw terminal Series 801, 802..............................
switches, pneumatic, flat pin plug Series 803, 804...................................
switches, Standard Pressure Control Series G1/4..I, G1/4..P....................
switches, electronic, Magic Pressure Control Series MPC........................
35
37
39
41
Pages 59–120
Metal push-in fittings.........................................................................................................
Plastic push-in fittings........................................................................................................
Miniature plastic push-in fittings
Compression fittings, banjo bolts....................................................................................
Standard fittings for general installation work.............................................................
Sealing rings and tapes.....................................................................................................
Tube/hose fittings...............................................................................................................
Tubing.....................................................................................................................................
Tubing accessories..............................................................................................................
Air line accessories (see below)......................................................................................
Quick release couplings, self-sealing.............................................................................
3/2 way slide valves, Series HS.....................................................................................
Manifolds with integrated ball valves, Series VL........................................................
Ball valves, Series KH, KHE, KHM...................................................................................
Blow guns, Series BP...........................................................................................................
61–69
71–82
82–84
85–94
95–105
105, 106
107, 108
109–111
112, 113
115–120
115–117
118
118
119, 120
120
Check Valves
Caractéristiques
■
■
■
■
■
Check valves, in-line
Quick exhaust valves
Throttle check valves, in-line
Check valves, screw-in
Throttle check valves, screw-in
■ Metal version
■ Plastic version
3
Check Valves – In-line
Check Valves Series RV
Characteristics according to VDI 3293
Check Valves
G1/8, G1/4
Characteristics
Symbol Unit
Pressures quoted as gauge pressure
Description
General features
Type
Spring loaded check valve
Mounting
Directly in tubing
Tube connection
Thread
Port size
G1/8
G1/4
0.02
0.02
Weight (mass)
kg
Installation
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-20 Note:
+80 When using below freezing point (0 °C)
Medium
temperature range
ϑmin
ϑmax
°C
°C
0
it is necessary to consult us
+80
Medium
Filtered compressed air, gases,
fluids
Lubrication
Oil mist lubrication compatible with
Buna N
Pneumatic Characteristics
RV series check valves are
designed for continuous
flow (not suitable for pulsating flow).
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow
QN
l/min
700
bar
<0.5
Flow direction
1000
In one direction
Differential pressure
for opening
Dimensions
A
B
C
Dimension Table and Order Instructions
4
Order Instructions
Type
Order No.
A
B
C
RV-06
PA10024
40
G1/8
SW17
RV-08
PA12007
45
G1/4
SW17
Check Valves Series RV9
Characteristics
Symbol Unit
Check Valves
G3/8 – G11/2
Description
General features
Type
Mounting
Directly in tubing
Tube connection
Thread
Port size
G3/8
G1/2
G3/4
G1
G11/4
G11/2
kg
0.18
0.19
0.27
0.49
0.74
0.98
Weight (mass)
Installation
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-20
+80
Note:
When using below freezing point (0 °C)
Medium
temperature range
ϑmin
ϑmax
°C
°C
0
+110
Medium
Filtered compressed air, cold and
warm water, various oils
Lubrication
Oil mist lubrication compatible with Buna N
Material
Housing: brass
Valve disc and guide: brass
Seal/spring interface dish: stainless CrNi steel
Spring: stainless CrNi steel
Valve seal disc: special synthetic rubber
composition
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.2
18
Nominal flow rate
QN
l/min
3400
bar
0.2
Flow direction
4335
7585
12500
20835
33335
RV9 series check valves are
designed for contiuous flow
(not suitable for pulsating
flow).
Suitable for:
– 100% oxygen
– natural gas
– vacuum
In one direction
for opening
Dimensions
øC
øB
øB
A
SW
Order Instructions
Type*
Order No.
A
B
RV9-10
PD 36114
54
G3/8x10 deep 34
23
RV9-15
PD 36335
57
G1/2x10 deep 34
27
RV9-20
PD 36336
64
G3/4x10 deep 41
33
RV9-25
PD 36337
75
G1x12 deep
40
C
48
SW
RV9-32
PD 36338
82
G11/4x12 deep 60
50
RV9-40
PD 36339
93
G11/2x14 deep 71
55
* other sizes on request
Dimensions in mm
5
Quick Exhaust Valves Series SV
Quick Exhaust
Valves
G1/8 – G3/4
Characteristics
Symbol Unit
Description
General Features
Type
Poppet valve
Mounting
Directly in tubing
Tube connection
Thread
Port size
G1/8
G1/4
G1/2
G3/4
0.088
0.143
0.334
0.790
Weight (mass)
kg
Installation
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-10
+80
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
0
+80
Medium
Filtered compressed air
Lubrication
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow A→R
QN
l/min
800
1670
4500
10750
Dimensions
A
SW
C
SW
D
øB
SW
Dimension Table, Weight and Order Instructions
6
Order Instructions
Type
Order No.
A
B
C
D
SW
Weight
(mass) (kg)
SV-06-2
PD39152
42
Ø 27.5
15
G1/8
15
0.088
SV-08-2
PD39153
54
Ø 33
19
G1/4
19
0.143
SV-10-2
PD39154
54
Ø 33
19
G3/8
19
0.140
SV-15-2
PD39155
72
Ø 43
27
G1/2
26
0.334
SV-20-2
PD39156
87
Ø 49
35,5
G3/4
32
0.790
Throttle Check Valves Series DRV
Characteristics
Symbol Unit
Throttle Check
Valves
M5 – G1/2
Description
General Features
Type
Throttle valve with parallel
check valve
Mounting
Directly in tubing
2 through-bolts
panel mounting
Tube connection
Thread
Port size
M5
G1/8
G1/4
G3/8
G1/2
0.020
0.035
0.130
0.225
0.245
Weight (mass)
kg
Installation
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-20
+80
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
0
+80
Medium
Filtered compressed air, lubricated or unlubricated
Lubrication
1
2
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow 1)
(Throttle valve)
Nominal flow 2)
(Check valve)
QN
l/min
80
125
450
1100
1200
QN
l/min
80
125
450
1100
1200
bar
<0.5
for opening the
check valve
Important:
Please note the flow
direction
1 → 2 throttled
2
→
1 free exhaust
1
) If the throttle is completely open
) If the throttle is completely closed
2
Flow Characteristics Type: DRV-M5
Qn = (l/min)
100
90
80
70
60
50
40
30
20
10
0
0
2
4
6
8 10 12 14
Turns of adjusting screw
Dimensions in mm
7
Throttle Check Valves Series DRV
Flow Characteristics Type: DRV-1/8
Qn = (l/min)
Qn = (l/min)
200
1000
180
900
160
800
140
700
120
600
500
100
400
80
300
60
200
40
100
20
0
0
0
2
4
6
8 10 12 14 16 18
0
2
Qn = (l/min)
2000
2000
1800
1800
1600
1600
1400
1400
1200
1200
1000
1000
800
800
600
600
400
400
200
200
0
2
4
6
8 10 12 14
8
8 10 12 14
Qn = (l/min)
0
6
4
0
0
2
4
6
8 10 12 14
Dimensions
E
H
SW
SW1
2
1
L1
D
B1
B
B3
B2
Kmax.
F
L
A
L2
C
Order Instructions
Type
Order No.
A
B
DRV-M5
PA 10232
26
DRV-1/8
B1
B2
B3
C
26.5 16
6
2.5 14
PA 10233
32.5 31.5 22
6
DRV-1/4
PA 12594
55
48
32
DRV-3/8
PA 16143
58
57
40
DRV-1/2
PA 16144
68
57
40
10
D
E
ØF
H
L
L1
ØL2
K max
SW
SW 1
12.5 18
4.4
M10x1
M5
5.5
8.5
44
7
14
2.5 16
17.5 24
4.4
M12x1
G1/8 9
13.5
52
10
17
10
4.5 25
25
35
6.5
M20x1.5 G1/4 12
19
72
13
22
10
5.0 30
33
43
6.5
M24x1.5 G3/8 13.5 23
92
19
27
5.0 30
33
50
6.5
M24x1.5 G1/2 15
92
19
27
27.5
Dimensions in mm
9
Throttle Check Valves, Plastic, Series DRV
Characteristics
Throttle Check
Valves, Plastic,
with push-in
connections
Characteristics
Symbol Unit
Description
General features
Tube connection
Push-in connections
Tube diameter
ØDA
mm
ϑmin
ϑmax
°C
°C
4
Installation
6
8
10
12
In any position
Ambient and
medium
temperature range
-20
+60
Material
Note:
Housing – aluminium/plastic
Throttle spindle– brass, anodized
Seals – Buna N
1
2
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0
10
Nominal flow 1)
(throttle valve)
QN
l/min
117
183
300
467
767
Nominal flow 2)
(check valve)
QN
l/min
117
183
300
467
767
1
2
Important:
Please note the flow
direction
1 → 2 throttled
→
Dimensions
H
1 free exhaust
A
B
2
) If the throttle is completely open
) If the throttle is completely closed
L
Æ
F
10
Order Instructions
Type
Order No.
Tube
Ø OD
Lmax
A
ØB
F
H
DRV-4MsvKU
KT0447
4
29.9
15
3.3
16.8
45.1
DRV-6MsvKU
KT0448
6
35.0
20
4.3
17.6
50.3
DRV-8MsvKU
KT0449
8
37.4
23
4.4
18.7
55.7
DRV-10MsvKU
KT0450
10
43.8
28
4.4
19.6
61.2
DRV-12MsvKU
KT0451
12
47.4
32
4.4
21.9
69.8
Check Valves – Screw-in
Check Valves Series ERV
Characteristics
Symbol Unit
General features
Type
Description
with cone-shaped seal
element and elastic seal
Port 1:
internal thread to IS0 228,
push-in fitting
Port 2:
external thread to ISO 228
Port 12:
M5, G1/8 internal
See dimension table
Connections
Port sizes
Weight (mass)
kg
See table
Installation
Ambient
temperature range
ϑmin
ϑmax
°C
°C
In any position – rings can be rotated 360° after the
valve has been installed
-10 Note:
+60 When using below freezing point (0 °C), please
Medium
temperature range
ϑmin
ϑmax
°C
°C
-10 consult our technical department
+60
Medium
Filtered compressed air, neutral gases *
Lubrication
With or without oil mist lubrication 1)
Material
Metal parts: nickel-plated brass or stainless steel
Springs: stainless steel
Seals: Buna N (NBR)
Sealing ring: Polyamide
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.3
10
Nominal flow rate
QN
l/min
See table
Screw-in
Check Valves
G1/8 – G1/2
2
12
10
1
Actuation:
pneumatic deblocking
Actuation:
pneumatic
Direct
Actuation pressure range
pst
bar
See diagram
* other media on request
1)
We recommend the use of mineral oil type VG32 to ISO 3448
Nominal Flow Rate, Tightening Torque, Opening Pressure, Weight (mass)
G1/8
DN
QN1→2 QN2→1
[mm] [l/min] [l/min]
3.0
220
280
G1/4
4.4
340
460
G3/8
5.7
700
910
G1/2
8.8
1450
1660
Port Size
Max. Tightening pmin 2→1 Weight
Torque [Nm]
[bar]
mass [kg]
1.2
0.2
0.068 – no hollow screw
0.048 – with thread G1/8
0.048 – fitting ø 6
1.8
0.2
0.050 – no hollow screw
3.5
0.2
4.0
0.15
Dimensions in mm
11
Check Valves Series ERV
Example of Control System
Pilot Pressure in Relation to Operating Pressure
[bar]
Pilot Pressure Range
3
2,5
2
1,5
Pneumatic signal
1
0,5
0
0
1
2
3
4
5
6
7
8
10 [bar]
9
Operating Pressure Range
Example of Control System with Vertical Load
Dimensions
Version with internal thread
Version with push-in fitting
12
If pressure fails,
cylinder stops
immediately
12
P2
F2
F1
O
1
1
P
L1
F1
L
SW
P1
F
M
M
2
2
F
F1
F2
L
L1
M
O*
P
P1
P2
SW
G1/8
G1/8
G1/8
ø6
M5
M5
37.5
37.5
12.5
12.5
21
25
15
15
6.5
6.5
7
–
6
6
14
14
Order Instructions
Type
Order No.
ERV-1/8
KL4077
ERV-1/8
KL4078
G1/4
G1/4
G1/8
42.5
13.5
25
17
7
8
7
17
ERV-1/4
KL4080
G1/4
ø6
G1/8
42.5
13.5
27.5
17
7
–
7
17
ERV-1/4
KL4081
G1/4
ø8
G1/8
42.5
13.5
32
17
7
–
7
17
ERV-1/4
KL4082
G3/8
G3/8
G1/8
46
15
31
20
9
10
7
19
ERV-3/8
KL4083
G3/8
ø8
G1/8
46
15
31.5
20
9
–
7
19
ERV-3/8
KL4084
G3/8
ø 10
G1/8
46
15
36
20
9
–
7
19
ERV-3/8
KL4085
G1/2
G1/2
G1/8
51.5
17
40
24
10
14
7
24
ERV-1/2
KL4086
G1/2
ø 12
G1/8
51.5
17
40.5
24
10
–
7
24
ERV-1/2
KL4087
12
Throttle Check Valves Series EDRV
Characteristics
Symbol Unit
Screw-in Throttle
Check Valves
G1/8, G1/4
Description
General Features
Type
Spring loaded throttle check valve
Mounting
Screw-in valve
Tube connection
Thread
Port size
G1/8
G1/4
0.03
0.04
Weight (mass)
kg
Installation
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-10
+60
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
-10
+60
Medium
Lubrication
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow rate,
throttle valve
(throttle completely open)
QN
l/min
250
400
Nominal flow rate,
check valve
(throttle completely closed)
QN
l/min
350
450
1
2
Speed Regulating Valve
This valve is used for
regulating the piston speed
of pneumatic cylinders.
Dimensions
B1
D
1
SW
B
max.
F
C
F1
2
E
A
Type
Order Instructions
Order No.
Tube
ØOD/ID
A
B
B1
C
D max
E
F
F1
SW
EDRV-06-5/3
PA 10018
5/3
34
8
G1/8
16.5
1
16
18.5
26.5
14
EDRV-06-6/4
PA 10019
6/4
34
8
G1/8
16.5
1
16
21.5
29.5
14
EDRV-06-8/6
PA 10020
8/6
34
8
G1/8
16.5
1
16
22.5
30.5
14
EDRV-08-6/4
PA 12001
6/4
38
10.5
G1/4
19
1.2
20
23
33
17
EDRV-08-8/6
PA 12002
8/6
38
10.5
G1/4
19
1.2
20
24
34
17
10/8
38
10.5
G1/4
19
1.2
20
26
36
17
EDRV-08-10/8 PA 12003
Dimensions in mm
13
Throttle Check Valves Series EDRV, SEDRV
Screw-in Throttle
Check Valves
M5 – G1/4
Characteristics
General Features
Symbol Unit
Type
Mounting
Tube connection
Port size
Weight (mass)
Installation
Description
Screw-in valve
Thread
M5
G1/8
G1/4
0.019
0.042
0.083
In any position
kg
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-10
+70
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
-10
+70
Medium
Lubrication
1
2
1
2
for air outlet
throttling
for air inlet
throttling
– with tube connection
– for air inlet and air outlet
throttling
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow rate,
throttle valve
Nominal flow rate,
check valve
(throttle completely closed)
QN
l/min
45
200
450
QN
l/min
30
140
380
Flow Characteristics
Type: EDRV/SEDRV-M5
Type: EDRV/SEDRV-G1/8
Type: EDRV/SEDRV-G1/4
Tube Ø ID 3 mm
Tube Ø ID 6 mm
Tube Ø ID 8 mm
Qn = (l/min)
Qn = (l/min)
250
500
40
200
400
30
150
300
20
100
200
10
50
100
0
0
1
2
3
4
5
6
7
8
9
14
Qn = (l/min)
50
0
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
Screw-in Throttle Check Valves
Type: EDRV-....BI
Type: EDRV-....B
Type: SEDRV-....B
Versions for
air inlet throttling
L2
L2
SW
SW
*
L2
*
SW
*
1
L3
2
G
G
G
øD
øD
øD
* Throttle screw
L1
1
L1
1
L1
1
2
L
øD1
L
øDA/DI
L
2
L3
G
2
L3
øD1
SW 1
* Throttle screw
* Throttle screw
Screw-in Throttle Check Valves with push-in fittings – Type SEDRV-....B
Order Instructions
Tube
Type
Order No. ØOD
Port Size SW
G
SW1 ØD
ØD1 L
L1
L2
L3
SEDRV-184B KW 0530
4
G1/8
12
-
14
11
37
7
25
11.5
SEDRV-185B KW 0531
5
G1/8
12
-
14
12
37
7
25
11.5
SEDRV-186B KW 0532
6
G1/8
12
-
14
13
37
7
26
11.5
SEDRV-146B KW 0533
6
G1/4
16
-
18
13
50
9
28
15
SEDRV-188B KW 0534
8
G1/8
12
-
14
15
37
7
31
11.5
SEDRV-148B KW 0535
8
G1/4
16
-
18
15
50
9
31
15
SEDRV-1410B KW 0536
10
G1/4
16
-
18
18
50
9
36
15
Screw-in Throttle Check Valves with union nut – Type EDRV-....B
Order Instructions
Tube
Port Size SW
Type
Order No. ØDA/DI* G
SW1 ØD
ØD1 L
L1
L2
L3
EDRV-184B
KW 0539
4/2
G1/8
12
10
14
-
37
6
28
11.5
EDRV-185B
KW 0540
5/3
G1/8
12
10
14
-
37
6
28
11.5
EDRV-186B
KW 0541
6/4
G1/8
12
12
14
-
37
6
27.5
11.5
EDRV-146B
KW 0542
6/4
G1/4
16
12
18
-
50
8
30
15
EDRV-188B
KW 0543
8/6
G1/8
12
14
14
-
37
6
28
11.5
EDRV-148B
KW 0544
8/6
G1/4
16
14
18
-
50
8
31
15
10/8
G1/4
16
16
18
-
50
8
29.5
15
EDRV-1410B KW 0545
Screw-in Throttle Check Valves with internal thread – Type EDRV-....BI
Order Instructions
Internal
Port Size SW
Type
Order No. Thread D1 G
SW1 ØD
ØD1 L
L1
L2
L3
EDRV-1818BI KW 0537
G1/8
G1/8
12
-
14
13.5 37
7
20.5
11.5
EDRV-1414BI KW 0538
G1/4
G1/4
16
-
18
17
8
29.5
15
* = Tube ØOD/ID
50
Dimensions in mm
15
Throttle Check Valves Series EDRV, SEDRV
Type: EDRV-....AI
Versions for
air outlet throttling
L2
L2
SW
SW
*
2
L2
*
SW
*
L
G
G
G
øD
øD
øD
* Throttle screw
L1
1
L1
1
L1
1
2
L3
L3
2
øD1
L
øDA/DI
L
2
L3
G
SW 1
øD1
1
Type: SEDRV-....A
Type: EDRV-....A
* Throttle screw
* Throttle screw
Screw-in Throttle Check Valves with push-in fittings – Type SEDRV-....A
Order Instructions
Tube
Type
Order No. ØOD
Port Size SW
G
SW1 ØD
ØD1 L
L1
L2
L3
SEDRV-54A
KW 0511
4
M5
9
-
10
10
28
5
24
5.5
SEDRV-184A KW 0512
4
G1/8
12
-
14
11
37
7
25
11.5
SEDRV-55A
KW 0513
5
M5
9
-
10
11
28
5
25
5.5
SEDRV-185A KW 0514
5
G1/8
12
-
14
12
37
7
25
11.5
SEDRV-186A KW 0515
6
G1/8
12
-
14
13
37
7
26
11.5
SEDRV-146A KW 0516
6
G1/4
16
-
18
13
50
9
28
15
SEDRV-188A KW 0517
8
G1/8
12
-
14
15
37
7
31
11.5
SEDRV-148A KW 0518
8
G1/4
16
-
18
15
50
9
31
15
SEDRV-1410A KW 0519
10
G1/4
16
-
18
18
50
9
36
15
L2
L3
Screw-in Throttle Check Valves with union nut – Type EDRV-....A
Order Instructions
Tube
Port Size SW
Type
Order No. ØDA/DI* G
SW1 ØD
ØD1 L
L1
EDRV-54A
KW 0522
4/2
M5
9
9
10
-
28
4.5 23.5
6
EDRV-184A
KW 0523
4/2
G1/8
12
10
14
-
37
6
28
11.5
EDRV-185A
KW 0524
5/3
G1/8
12
10
14
-
37
6
28
11.5
EDRV-186A
KW 0525
6/4
G1/8
12
12
14
-
37
6
27.5
11.5
EDRV-146A
KW 0526
6/4
G1/4
16
12
18
-
50
8
30
15
EDRV-188A
KW 0527
8/6
G1/8
12
14
14
-
37
6
28
11.5
EDRV-148A
KW 0528
8/6
G1/4
16
14
18
-
50
8
31
15
10/8
G1/4
16
16
18
-
50
8
29.5
15
EDRV-1410A KW 0529
Screw-in Throttle Check Valves with internal thread – Type EDRV-....AI
Order Instructions
Internal
Type
Order No. thread D1
Port Size
G
SW
SW1 ØD
ØD1 L
L1
L2
L3
EDRV-1818AI KW 0520
G1/8
G1/8
12
-
14
13.5 37
7
20.5
11.5
EDRV-1414AI KW 0521
G1/4
G1/4
16
-
18
17
8
29.5
15
* = Tube ØOD/ID
16
50
Series SEDRV
Characteristics
General Features
Symbol Unit
Description
Type
Mounting
Tube connection
Installation
Screw-in valve
Thread
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-10
+70
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
-10
+70
Medium
Lubrication
Screw-in Throttle
Check Valves
M5 – G1/2
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
G1/4
G1/8
M5
QN [l/min]
QN [l/min]
700
300
600
80
250
500
60
200
400
40
20
0
0
1
2
3
4
5
6
7
8
9
150
300
100
200
50
100
0
0 1 2 3 4 5 6 7 8 9 10 11
G3/8
G1/2
QN [l/min]
2
for air outlet
throttling
1
2
for air inlet
throttling
QN [l/min]
350
100
1
– for air inlet and air outlet
throttling
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
QN [l/min]
1600
1400
900
800
700
600
500
400
300
200
100
0
1200
1000
800
600
400
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
200
0
0
2
4
6
8
10
12
14
16
Dimensions in mm
17
Throttle Check Valves Series SEDRV
Screw-in Throttle Check Valves Type: SEDRV-....B
Versions for
1
B
SW 1
C
Æ
D
A
2
ÆE
2
1
SW
Screw-in Throttle Check Valves with push-in fittings – Type SEDRV-....B
Type
Order Instructions
Order No.
Tube
Ø*
Port Size
SW
SW1 ØE
B
A
D
C
QN
[Nl/min]
23.5
28.2
9.3
4
95
SEDRV-54B-Msv
KW 1001
4
M5
9
9
10.9
SEDRV-55B-Msv
KW 1002
5
M5
9
9
12
24.5
28.2
9.3
4
95
SEDRV-56B-Msv
KW 1003
6
M5
9
9
13.5
24.5
28.2
9.3
4
95
SEDRV-184B-Msv
KW 1004
4
G1/8
15
12
11.5
25
42
13.7
6
340
SEDRV-185B-Msv
KW 1005
5
G1/8
15
12
12.0
25
42
13.7
6
340
SEDRV-186B-Msv
KW 1006
6
G1/8
15
12
13.5
25
42
13.7
6
340
SEDRV-188B-Msv
KW 1007
8
G1/8
15
12
15.5
30
42
13.7
6
340
SEDRV-146B-Msv
KW 1008
6
G1/4
18
12
13.5
27.5
48
16
8
600
SEDRV-148B-Msv
KW 1009
8
G1/4
18
12
15.5
32
48
16
8
600
SEDRV-1410B-Msv
KW 1010
10
G1/4
18
12
18
34.3
48
16
8
600
SEDRV-1412B-Msv
KW 1011
12
G1/4
18
12
20.2
37.5
48
16
8
600
SEDRV-3810B-Msv
KW 1012
10
G3/8
21
14
18
36.3
53
19
9
870
SEDRV-3812B-Msv
KW 1013
12
G3/8
21
14
20.2
40.5
53
19
9
870
SEDRV-1212B-Msv
* = Tube ØOD
KW 1014
12
G1/2
26
17
20.2
40.5
60.5
22
11
1400
18
Screw-in Throttle Check Valves Type: SEDRV-....A
Versions for
B
SW 1
ÆE
2
C
D
A
2
Æ
1
1
SW
Screw-in Throttle Check Valves with push-in fittings – Type SEDRV-....A
Type
Order Instructions
Order No.
Tube
Ø*
Port Size
G
SW
SW1 ØE
B
A
D
C
QN
[Nl/min]
SEDRV-54A-Msv
KW 1015
4
M5
9
9
10.9
23.5
28.2
9.3
4
95
SEDRV-55A-Msv
KW 1016
5
M5
9
9
12
24.5
28.2
9.3
4
95
SEDRV-56A-Msv
KW 1017
6
M5
9
9
13.5
24.5
28.2
9.3
4
95
SEDRV-184A-Msv
KW 1018
4
G1/8
15
12
11.5
25
42
13.7
6
340
SEDRV-185A-Msv
KW 1019
5
G1/8
15
12
12.0
25
42
13.7
6
340
SEDRV-186A-Msv
KW 1020
6
G1/8
15
12
13.5
25
42
13.7
6
340
SEDRV-188A-Msv
KW 1021
8
G1/8
15
12
15.5
30
42
13.7
6
340
SEDRV-146A-Msv
KW 1022
6
G1/4
18
12
13.5
27.5
48
16
8
600
SEDRV-148A-Msv
KW 1023
8
G1/4
18
12
15.5
32
48
16
8
600
SEDRV-1410A-Msv
KW 1024
10
G1/4
18
12
18
34.3
48
16
8
600
SEDRV-1412A-Msv
KW 1025
12
G1/4
18
12
20.2
37.5
48
16
8
600
SEDRV-3810A-Msv
KW 1026
10
G3/8
21
14
18
36.3
53
19
9
870
SEDRV-3812A-Msv
KW 1027
12
G3/8
21
14
20.2
40.5
53
19
9
870
SEDRV-1212A-Msv
KW 1028
12
G1/2
26
17
20.2
40.5
60.5
22
11
1400
* = Tube ØOD
Dimensions in mm
19
Throttle Check Valves Series EDRVK, Plastic
Screw-in Throttle Check Valve Type: EDRV-...B
Short design, with slot and hexagon socket
Versions for
1
2
Order Instructions
Type
Order No.
EDRVK-54B-MsvKU
KT0452
EDRVK-56B-MsvKU
KT0453
EDRVK-184B-MsvKU KT0454
Port
Size
M5
M5
G1/8
G1/8
G1/8
G1/4
G1/4
G1/4
Tube
∅OD
4
6
4
6
8
6
8
10
A
Lmax* H
F
3.6
3.6
6
6
6
8
8
8
23.1
23.1
30.4
30.4
30.4
36.3
36.3
36.3
16.3
17.6
16.3
17.6
18.7
17.6
18.7
19.6
25.1
27.8
30.5
31.2
33.0
35.0
36.8
38.8
* If the throttle is completely
open
Material:
plastic/nickel-plated brass
H
SW1 SW2 QN
[Nl/min]
8
–
130
8
2
130
8
2
300
8
2
400
8
2
400
12
2
620
12
2
720
12
2
720
SW2
SW1
F
L
2
A
1
Versions for
1
2
H
SW1
F
A
L
2
20
Order Instructions
Type
Order No.
EDRVK-54A-MsvKU
KT0460
EDRVK-56A-MsvKU
KT0461
EDRVK-184A-MsvKU
KT0462
EDRVK-186A-MsvKU
KT0463
EDRVK-188A-MsvKU
KT0464
EDRVK-146A-MsvKU
KT0465
EDRVK-148A-MsvKU
KT0466
EDRVK-1410A-MsvKU KT0467
Material:
SW2
1
Screw-in Throttle Check Valve Type: EDRV-...A
Short design, with slot and hexagon socket
Port
Size
M5
M5
G1/8
G1/8
G1/8
G1/4
G1/4
G1/4
Tube
∅OD
4
6
4
6
8
6
8
10
A
Lmax* H
F
3.6
3.6
6
6
6
8
8
8
23.1
23.1
30.4
30.4
30.4
36.3
36.3
36.3
16.3
17.6
16.3
17.6
18.7
17.6
18.7
19.6
25.1
27.8
30.5
31.2
33.0
35.0
36.8
38.8
SW1 SW2 QN
[Nl/min]
8
–
130
8
2
130
8
2
300
8
2
400
8
2
400
12
2
620
12
2
720
12
2
720
open
Throttle Check Valves Series EDRV, Plastic
Screw-in Throttle Check Valve Type: EDRV-...B
Tube
∅OD
4
6
4
6
8
6
8
10
12
6
8
10
12
10
12
Port
Size
M5
M5
G1/8
G1/8
G1/8
G1/4
G1/4
G1/4
G1/4
G3/8
G3/8
G3/8
G3/8
G1/2
G1/2
A
Lmax* H
F
SW
4.6
4.6
4.5
4.5
4.5
5.5
5.5
5.5
5.5
6.0
6.0
6.0
6.0
7.0
7.0
37.0
37.0
40.1
40.1
40.1
47.6
47.6
47.6
47.6
55.9
55.9
55.9
55.9
59.6
59.6
16.8
17.6
16.3
17.6
18.7
17.6
18.7
19.6
21.9
17.6
18.7
19.6
21.9
19.6
21.9
8
8
8
8
8
12
12
12
12
12
12
12
12
19
19
26.6
27.2
30.9
31.4
34.2
35.6
38.3
39.5
41.8
39.0
40.0
42.5
45.5
47.1
50.3
QN
[Nl/min]
100
100
165
165
165
410
410
410
410
500
500
500
500
900
900
Versions for
1
H
SW
F
2
open
A
Material:
2
L
Order Instruction
Type
Order No.
EDRV-54B-MsvKU
KT0417
EDRV-56B-MsvKU
KT0418
EDRV-184B-MsvKU KT0419
Complete with:
rotating ring, two seals and O-ring, preassembled
1
Screw-in Throttle Check Valve Type: EDRV-...A
Order No.
KT0432
KT0433
KT0434
KT0435
KT0436
KT0437
KT0438
KT0439
KT0440
KT0441
KT0442
KT0443
KT0444
KT0445
KT0446
Port
Size
M5
M5
G1/8
G1/8
G1/8
G1/4
G1/4
G1/4
G1/4
G3/8
G3/8
G3/8
G3/8
G1/2
G1/2
Material:
Complete with:
rotating ring, two seals and O-ring, preassemble
A
Lmax* H
F
SW
4.6
4.6
4.5
4.5
4.5
5.5
5.5
5.5
5.5
6.0
6.0
6.0
6.0
7.0
7.0
37.0
37.0
40.1
40.1
40.1
47.6
47.6
47.6
47.6
55.9
55.9
55.9
55.9
59.6
59.6
16.8
17.6
16.3
17.6
18.7
17.6
18.7
19.6
21.9
17.6
18.7
19.6
21.9
19.6
21.9
8
8
8
8
8
12
12
12
12
14
14
14
14
19
19
26.6
27.2
30.9
31.4
34.2
35.6
38.3
39.5
41.8
39.0
40.0
42.0
45.5
47.1
50.3
QN
[Nl/min]
100
100
165
165
165
410
410
410
410
500
500
500
500
900
900
Versions for
1
2
H
SW
F
L
Type
EDRV-54A-MsvKU
EDRV-56A-MsvKU
EDRV-184A-MsvKU
EDRV-186A-MsvKU
EDRV-188A-MsvKU
EDRV-146A-MsvKU
EDRV-148A-MsvKU
EDRV-1410A-MsvKU
EDRV-1412A-MsvKU
EDRV-386A-MsvKU
EDRV-388A-MsvKU
EDRV-3810A-MsvKU
EDRV-3812A-MsvKU
EDRV-1210A-MsvKU
EDRV-1212A-MsvKU
Tube
∅OD
4
6
4
6
8
6
8
10
12
6
8
10
12
10
12
2
open
A
Order Instruction
1
Dimensions in mm
21
22
Flow Control Valves
■ Flow control valves, in-line
■ Flow control valves, screw-in
■ Metal version
23
Flow Control Valves – Block Version
Block Version Series DV
Flow Control Valves
M5 – G1/2
Characteristics
Symbol Unit
General Features
Type
Throttle Valve
Mounting
Directly in tubing
2 through-bolts
panel mounting
Tube connection
Thread
Port size
Weight (mass)
kg
Installation
1
2
M5
G1/8
G1/4
G3/8
G1/2
0.020
0.035
0.130
0.225
0.245
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-20
+80
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
0
+80
Medium
Filtered, lubricated or unlubricated compressed air
Lubrication
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow
when throttle is
completely open
QN
l/min
80
Flow Characteristics Type: DV-M5
125
Qn = (l/min)
100
200
90
180
80
160
70
140
60
120
50
100
40
80
30
60
20
40
10
20
0
2
4
6
8 10 12 14
450
1100
Flow Characteristics Type: DV-1/8
Qn = (l/min)
0
24
Description
0
0
2
4
6
8 10 12 14 16 18
1200
Qn = (l/min)
Qn = (l/min)
1000
2000
900
1800
800
1600
700
1400
600
1200
500
1000
400
800
300
600
200
400
100
200
0
0
0
2
4
6
8 10 12 14
0
2
4
6
8 10 12 14
Dimensions
E
Qn = (l/min)
H
SW
2000
SW1
1800
1600
F
1200
B2
Kmax.
1400
B3
1000
600
2
1
D
B1
B
800
L1
400
200
0
L
A
0
2
4
6
L2
8 10 12 14
C
Order Instructions
Type
Order No.
A
B
DV-M5
PA 10230
26
B1
B2
B3
C
26.5 16
6
2.5 14
D
E
12.5 18
ØF
H
L
L1
ØL2
K max
SW
SW 1
4.4
M10x1
M5
5.5
8.5
44
7
14
G1/8 9
13.5
DV-1/8
PA 10231
32.5 31.5 22
6
2.5 16
17.5 24
4.4
M12x1
52
10
17
DV-1/4
PA 12593
55
48
32
10
4.5 25
25
35
6.5
M20x1.5 G1/4 12
19
72
13
22
DV-3/8
PA 16141
58
57
40
10
5.0 30
33
43
6.5
M24x1.5 G3/8 13.5 23
92
19
27
DV-1/2
PA 16142
68
57
40
10
5.0 30
33
50
6.5
M24x1.5 G1/2 15
92
19
27
27.5
Dimensions in mm
25
Flow Control Valves – Screw-in
Flow Control Valves Series EDV, SEDV
Screw-in
Flow Control Valves
M5 – G1/4
Characteristics
Symbol Unit
Description
General Features
Type
Mounting
Tube connection
Port size
Weight (mass)
Installation
Throttle Valve
Screw-in valve
Thread
M5
G1/8
0.019
0.042
In any position
kg
ϑmin
ϑmax
ϑmin
ϑmax
Ambient
temperature range
Medium
temperature range
°C
°C
°C
°C
-10
+70
-10
+70
G1/4
0.083
Note:
Medium
Lubrication
Oil mist lubrication compatible withBuna N
1
2
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow rate,
throttle valve
QN
l/min
45
200
450
Type: EDV/SEDV-M5
Type: EDV/SEDV-G1/8
Type: EDV/SEDV-G1/4
Tube Ø ID 3 mm
Tube Ø ID 6 mm
Tube Ø ID 8 mm
Qn = (l/min)
50
250
500
40
200
400
30
150
300
20
100
200
10
50
100
0
0
0
1
2
3
4
5
6
7
8
9
26
Qn = (l/min)
Qn = (l/min)
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
Screw-in Flow Control Valves
Type: EDV-....C
Type: EDV-....C
Type: SEDV-....C
L2
L2
SW
SW
*
L2
*
SW
*
L
L1
L1
L1
L3
L3
øD1
L
øDA/DI
L
G
L3
øD1
SW 1
G
G
G
øD
øD
øD
* Throttle screw
* Throttle screw
* Throttle screw
Screw-in Flow Control Valves with push-in fittings – Type SEDV-....C
Order Instructions
Tube
Type
Order No. ØOD
Port Size SW
G
SW1 ØD
ØD1 L
L1
L2
L3
SEDV-54C
KW 0546
4
M5
9
-
10
10
28
5
24
5.5
SEDV-184C
KW 0547
4
G1/8
12
-
14
11
37
7
25
11.5
SEDV-55C
KW 0548
5
M5
9
-
10
11
28
5
25
5.5
SEDV-185C
KW 0549
5
G1/8
12
-
14
12
37
7
25
11.5
SEDV-186C
KW 0550
6
G1/8
12
-
14
13
37
7
26
11.5
SEDV-146C
KW 0551
6
G1/4
16
-
18
13
50
9
28
15
SEDV-188C
KW 0552
8
G1/8
12
-
14
15
37
7
31
11.5
SEDV-148C
KW 0553
8
G1/4
16
-
18
15
50
9
31
15
10
G1/4
16
-
18
18
50
9
36
15
L1
L2
L3
SEDV-1410C KW 0554
Screw-in Flow Control Valves with union nut – Type EDV-....C
Order Instructions
Tube
Port Size SW
Type
Order No ØDA/DI* G
SW1 ØD
EDV-54C
KW 0557
4/2
M5
9
9
10
-
28
4.5 23.5
6
EDV-184C
KW 0558
4/2
G1/8
12
10
14
-
37
6
28
11.5
EDV-185C
KW 0559
5/3
G1/8
12
10
14
-
37
6
28
11.5
EDV-186C
KW 0560
6/4
G1/8
12
12
14
-
37
6
27.5
11.5
EDV-146C
KW 0561
6/4
G1/4
16
12
18
-
50
8
30
15
EDV-188C
KW 0562
8/6
G1/8
12
14
14
-
37
6
28
11.5
EDV-148C
KW 0563
8/6
G1/4
16
14
18
-
50
8
31
15
EDV-1410C
KW 0564
10/8
G1/4
16
16
18
-
50
8
29.5
15
ØD1 L
Screw-in Flow Control Valves with internal thread – Type EDV-....CI
Order Instructions
Internal
Port Size SW
Type
Order No thread. D1 G
SW1 ØD
ØD1 L
L1
L2
L3
EDV-1818CI
KW 0555
G1/8
G1/8
12
-
14
13.5 37
7
20.5
11.5
EDV-1414CI
KW 0556
G1/4
G1/4
16
-
18
17
8
29.5
15
* = Tube ØOD/ID
50
Dimensions in mm
27
Flow Control Valves Series SEDV
Screw-in
Flow Control Valves
M5 – G1/2
Characteristics
General Features
Symbol Unit
Description
Type
Mounting
Tube connection
Installation
Throttle Valve
Screw-in valve
Thread
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-10
+70
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
-10
+70
Medium
Lubrication
Oil mist lubrication compatible withBuna N
1
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
2
G1/8
M5
G1/4
QN [l/min]
QN [l/min]
350
100
700
300
600
80
250
500
60
200
400
150
300
100
200
50
100
40
20
0
0
1
2
3
4
5
6
7
8
9
0
0 1 2 3 4 5 6 7 8 9 10 11
G3/8
QN [l/min]
G1/2
QN [l/min]
1600
1400
900
800
700
600
500
400
300
200
100
0
1200
1000
800
600
400
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
200
0
0
2
4
6
8
10
12
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
28
QN [l/min]
14
16
Screw-in Flow Control Valves Type: SEDV-...
B
C
ÆE
D
A
2
Æ
SW 1
1
SW
Screw-in Flow Control Valves with push-in fittings – Type SEDV-...
Type
Order Instructions
Order No.
Tube
ØO *
Port Size
G
SW
SW1 ØE
B
A
D
C
QN
[Nl/min]
SEDV-54-Msv
KW 1029
4
M5
9
9
10.9
23.5
28.2
9.3
4
95
SEDV-55-Msv
KW 1030
5
M5
9
9
12
24.5
28.2
9.3
4
95
SEDV-56-Msv
KW 1031
6
M5
9
9
13.5
24.5
28.2
9.3
4
95
SEDV-184-Msv
KW 1032
4
G1/8
15
12
11.5
25
42
13.7
6
340
SEDV-185-Msv
KW 1033
5
G1/8
15
12
12.0
25
42
13.7
6
340
SEDV-186-Msv
KW 1034
6
G1/8
15
12
13.5
25
42
13.7
6
340
SEDV-188-Msv
KW 1035
8
G1/8
15
12
15.5
30
42
13.7
6
340
SEDV-146-Msv
KW 1036
6
G1/4
18
12
13.5
27.5
48
16
8
600
SEDV-148-Msv
KW 1037
8
G1/4
18
12
15.5
32
48
16
8
600
SEDV-1410-Msv
KW 1038
10
G1/4
18
12
18
34.3
48
16
8
600
SEDV-1412-Msv
KW 1039
12
G1/4
18
12
20.2
37.5
48
16
8
600
SEDV-3810-Msv
KW 1040
10
G3/8
21
14
18
36.3
53
19
9
870
SEDV-3812-Msv
KW 1041
12
G3/8
21
14
20.2
40.5
53
19
9
870
SEDV-1212-Msv
KW 1042
12
G1/2
26
17
20.2
40.5
60.5
22
11
1400
* = Tube ØOD
Dimensions in mm
29
Exhaust Throttle Valves Series DVE
Dimensions
Exhaust Throttle
Valves
G1/8 – G1/2
SW
E
øB
A
SW1
D
C
Exhaust throttle valves
which are screwed directly
into the exhaust connections
of valves.
Order Instructions
Type
Order No
A
B
C
D
E
SW
SW1
Weight
Mass (kg)
DVE-06
KY 6952
G1/8
14
24
5
4
14
9
0.010
DVE-08
KY 6953
G1/4
18
32
7.5
6
17
11
0.025
DVE-15
KY 6954
G1/2
27
45
9.5
10
27
17
0.090
Material: Brass / sintered bronze
Note:
The regulating spindle of this
valve can be unscrewed
right out of the valve.
Therefore the spindle must
not be unscrewed more than
8 turns from the closed
position and must then be
secured immediately with
the lock nut.
Dimensions in mm
30
Special Valves
■
■
■
■
■
■
Logic components AND / OR
Timer
2/2 way screw-in valves
3/2 way hollow screw valves
Miniature screw-in pressure regulators
Relief valves
31
Special Valves – Block Form
AND Valves Series AND8
AND Valves
(Dual Pressure Valves)
G1/8
Characteristics
Symbol Unit
General Features
Type
Poppet valve
Mounting
2 through-bolts M5
Tube connection
Thread
Port size
G1/8
Weight (mass)
kg
0.05
Installation
1
2
&
3
3
1
2
Actuation: Pneumatic
Description
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-20 Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
0
+80
Medium
Lubrication
With or without oil mist lubrication
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow rate
QN
l/min
134
Dimensions
40
24
G1/8
10
23
28
5,5
20
Order Instructions
AND 8-1/8
32
PA10207
Shuttle Valves Series OR8
Characteristics
Symbol Unit
OR Valves
(Shuttle Valves)
G1/8, G1/4
Description
General Features
Type
Poppet valve
Mounting
2 through-bolts M5
Tube connection
Thread
Port size
G1/8
G1/4
0.05
0.08
Weight (mass)
kg
Installation
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-20
+80
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
0
+80
Medium
Lubrication
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0.5
10
Nominal flow rate
QN
l/min
385
1
2
≥1
3
3
635
1
2
Dimensions
A
D
H
G
E
C
F
B
Order Instructions
Type
Order No.
A
B
C
D
E
F
G
H
OR 8-1/8
PA10206
40
20
28
24
23
5.5
10
G1/8
OR 8-1/4
PA12516
45
20
35
24
27
5.5
10
G1/4
Dimensions in mm
33
Special Valves – Block Form
Timer Series T3P10
Characteristics
Timer
Characteristics
Symbol Unit
Description
General Features
Mounting
On base plate
Tube connection
Swivelling plug-in connection
Port size
mm
For tube Ø 4/2.7
Installation
In any position
ϑmin
ϑmax
Ambient
temperatures
°C
°C
-10
+60
Medium
Filtered and lubricated or filtered
and unlubricated air
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
2
7
Nominal flow rate
QN
m3/h
In direction 1-3: 12.2
In direction 3-1: 13.3
Time delay
t max
s
max. 40 (according to type)
Reset time
Not more than 200 ms
Dimensions
Supplied without base plate
– please order this separately
33
1
2
25
15
23
3
2 x M4
64,5
3,6
1,5
ø2,8
87,5
ø21
5,75
Order Instructions
34
Order Instructions
Order No.
Version
(Time Delay)
Function
1.0 -10 sec.
NC (normally closed)
LTY-10/2
5.0 -40 sec.
NC (normally closed)
LTY-10/3
KY 8104
0.5 -6 sec.
NO (normally open)
LTN-10/2
KY 8105
2.5 -25 sec.
NO (normally open)
LTN-10/3
KY 8106
Type
KY 8103
Characteristics of Base Plate
Characteristics
Comments
Mounting
On rail to DIN 46 277 (35 x 15 or 35 x 7.5); clamps on.
On flat surface with 2 screws M4
Swivelling plug-in connection for tube Ø 4/2.7
Connections
Base Plate
for Timer
Dimensions of Base Plate
26,5
4,5
M4
1
3
68
2
4,5
1
15
40
3
22
7,5x3,5 deep
13
2
Colour coding:
1 = green – Pilot signal 12
2 = black – Pressure supply 1
23
3 = red – Outlet 2
Order Instructions: BIC 3P10 KY 9484
Dimensions in mm
35
Special Valves – Screw-in
2/2 Way Screw-in Valves Series EVP
2/2 Way
Screw-in Valves
(Check Valves)
G1/8 – G1/2
Characteristics
Symbol Unit
General Features
Type
Spool valve with spring return
Tube connection
Port 1: Internal thread to IS0 228
Port 2: External thread to ISO 228
Port 12: G1/8 internal, push-in. Ø 4
See dimension drawing
Port size
Weight (mass)
kg
See table
Installation
2
12
Description
Ambient
temperature range
ϑmin
ϑmax
°C
°C
In any position – rings can be rotated 360° after
the valve has been installed
-10
Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
-10
+70
Medium
Filtered compressed air, neutral gases*
Lubrication
Material
Metal parts: nickel-plated brass or stainless steel
Springs: stainless steel
Seals: Buna N (NBR)
10
1
Actuation:
pneumatic
Nominal pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
0
10
Nominal flow rate
QN
l/min
See table
Actuation
Pneumatic
Direct
Actuation pressure range pst
bar
See diagram
* Other media on request
1)
we recommend the use of mineral oil VG 32 to ISO 3448
Nominal flow rate, tightening torque, opening pressure, weight (mass)
Port Size
36
G1/8
DN
[mm]
4.0
QN
max. tightening
[l/min] [Nm]
300
3.0
G1/4
5.6
700
7.0
G3/8
7.7
1200
9.0
G1/2
10.0
2100
15.0
Weight
Mass [kg]
0.068 – with thread
Example
[bar]
5
4
3
2
1
0
0
1
2
3
4
5
6
7
8
10 [bar]
9
The cylinder can be stopped during extension and retraction
Dimensions
Dimensions
with internal thread
Dimensions
with push-in fitting
N
P2
N
F2
F2
12
12
F1
F1
1
1
L1
L
L2
SW
P
P1
F
M
M
2
2
F2
L
L1
L2
M
G1/8 G1/8
G1/8 ø 6
G1/8
ø4
51.5
51.5
16
16
42
42
21
25
21
25
G1/4 G1/4
G1/8
57.5
19.5
48
25
G1/4 ø 6
ø4
57.5
19.5
48
G1/4 ø 8
ø4
57.5
19.5
G3/8 G3/8
G1/8
63
22.5
G3/8 ø 8
ø4
63
G3/8 ø 10
ø4
63
F
F1
N
P
P1
P2
SW
6
6
7
–
7
–
14
14
EVP-1/8
EVP-1/8
KL4062
KL4063
21
8
8
7
17
EVP-1/4
KL4064
27.5
25
8
–
–
17
EVP-1/4
KL4065
48
32
25
8
–
–
17
EVP-1/4
KL4066
53.5
31
21
8
10
7
22
EVP-3/8
KL4067
22.5
53.5
31.5
25
8
–
–
22
EVP-3/8
KL4068
22.5
53.5
36
25
8
–
–
22
EVP-3/8
KL4069
Type
Order Instructions
Order No.
G1/2 G1/2
G1/8
71.5
27
61.5
40
21
12
14
7
27
EVP-1/2
KL4070
G1/2 ø 12
ø4
71.5
27
61.5
40.5
25
12
–
–
27
EVP-1/2
KL4071
Dimensions in mm
37
3/2 Way Hollow Screw Valves Series EVP
3/2 Way
Hollow Screw
Valves
M5 (G1/8)
Characteristics
Symbol Unit
General Features
Type
Spool valve with air spring return
Tube connection
Thread
ø 10 mm for hollow screw G1/8
Port size
M5 (G1/8)
Installation
With hollow screw G1/8
Weight (mass)
kg
0.050
Installation
In any position
ϑmin
ϑmax
ϑmin
ϑmax
Ambient
temperature range
Medium
temperature range
2
12
10
1
12
1
-10
+80
-10
+80
Note:
When using below freezing point (0 °C),
please consult our technical department
Medium
Lubrication
Material
Housing: anodised aluminium
Internal parts: Ms 58
Seals: Buna N (NBR)
1)
2
10
°C
°C
°C
°C
EVP-M5NG
3
Description
EVP-M5NO
3
Versions:
normally closed
normally open
3/2 Way hollow screw valve
for direct assembly to the
cylinder with a hollow screw.
It is also possible to control
multiple cylinders through
port 2. The valve can also be
used as an AND element.
Nominal Pressure
pn
bar
6
Operating pressure
range
pmin
pmax
bar
bar
2.5
10
Nominal flow rate
QN
l/min
120
Actuation
Pneumatic
Direct
Actuation pressure range pst
bar
See diagram
1)
[bar]
7
Supplied:
1 valve without hollow screw
6
5
4
3
2
1
0
0
1
2
3
4
5
6
38
7
8
9
10 [bar]
Dimensions
32
15,8
17
M5
5
25
20,6
23
3
32
ø10
2
12 (10) 1
Order Instructions
Actuation
Return
Symbol
Type
Order Instructions
Order No.
2
12
10
Air spring return
Pneumatic,
permanent signal
1
EVP-M5NG
KL4090
EVP-M5N0
KL4089
3
2
10
12
Air spring return
1
3
Dimensions in mm
39
Miniature Screw-in Pressure Regulators Series H
Characteristics to VDI 3290
Miniature Screw-in
Pressure Regulators
G1/8, M5
Characteristics
Pressures quoted as gauge pressures
Symbol Unit
General Features
Type
Description
Pressure regulating valve, piston
type with secondary pressure relief
Thread
Input: G1/8 and M5
Output: M5
Gauge: M5
Tube connection
Port size
Nominal bore
mm
2.2
Weight (mass)
kg
0.08 (0.11)
Installation
In any position
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-20 Note:
Medium
temperature range
ϑmin
ϑmax
°C
°C
-20
+80
please consult our technical department
Medium
Lubrication
Material
Metal parts: brass Ms 58
Springs: stainless and zinc-plated steel
Seals: Buna N (NBR)
Versions:
– Screw-in version
– for panel mounting
– Viton version*
Operating pressure
range
Secondary pressure
range
pmin
pmax
pmin
pmax
bar
bar
bar
bar
0
12
1
8
Flow rate
QN
l/min
100 **
**at p1 = 10 bar to p2 = 6 bar, ∆p = 1 bar
1)
Dimensions
* Note:
The Viton version can be
used for temperatures up
to 140°C.
Please consult us before
using the valve in high
temperatures, especially
when using other media
than compressed air.
Screw-in version
Panel mounting version
M12 x 1
4
SW17
M5
21
59,4
p2
SW19
7,5
7,5
21
M5
54
86,5
SW 19
67,4
SW 17
M5
M5
G1/8
p1
40
G1/8
p1
p2
MR, HMRS
Order Instructions
Version
Port Size
Seal
Type
Screw-in version
G1/8, M5
Buna N
Order Instructions
Order No.
HMR-1/8
KL4072
Panel version
G1/8, M5
Buna N
HMRS-1/8
KL4074
Screw-in version
G1/8, M5
Viton
HMR-1/8-V
KL4073
Panel version
G1/8, M5
Viton
HMRS-1/8-V
KL4075
Dimensions in mm
41
Relief Valves Series USV
Characteristics
Relief Valves
G1/8, G1/4
Characteristics
Symbol Unit
Description
General Features
System
Spring-loaded poppet valve with
adjustable opening pressure
Type
USV-1/8
USV-1/4
Port size
G1/8
G1/4
Installation
In any position
Temperature range
ϑmin
ϑmax
°C
°C
Medium
0
+90
Compressed air
Opening pressure
bar
Material
1-4 or 3-7 (adjustable)
Brass
Dimensions
Adjustment:
1-4 bar
3-7 bar
7
27
SW 16
ø3
G 1/8
G 1/4
Order Instructions
Adjustment
Port Size
Type
42
Order Instructions
Order No.
1 – 4 bar
G1/8
USV-1/8 (1-4 bar)
KY 4093
3 – 7 bar
G1/8
USV-1/8 (3-7 bar)
KY 4065
1 – 4 bar
G1/4
USV-1/4 (1-4 bar)
KY 4094
3 – 7 bar
G1/4
USV-1/4 (3-7 bar)
KY 4066
Silencers, Strainers, Screw-In Sieves
■
■
■
■
Exhaust silencers, sintered metal
Exhaust silencers, plastic
Strainers, brass
Screw-In sieves, brass
43
Silencers
Exhaust Silencers, Sintered Metal Series D1, D1K
Characteristics (not for type 50030)
Exhaust Silencers
M5 – G1
Characteristics
Symbol Unit
Description
General Features
Type
Single-chamber principle
Port size
Weight (mass)
Ambient
temperature range
ϑmax
G1/8
G1/4
G3/8
G1/2
G3/4
G1
kg
0.005
0.01
0.03
0.06
0.11
0.2
°C
+250
(danger of icing in lower temperature range)
Material
Sintered bronze (on M5, threaded part is bronze)
Grain size
mm
0.3 to 0.6
Operating pressure
pmin
range
pmax
bar
bar
0
16
Dimensions Type: D1K
Port size G1/8–G3/8
Dimensions Type: D1
Port size G1/8–G1
Dimensions Type: 50030
Port size M5
B
16,5
D
A
E
D
A
C
M5
Exhaust silencers disperse
the exhaust air, reduce
exhaust noise and prevent
the ingress of dirt into
components
C
B
12,5
SW 7
Order No. KY 8869
Order Instructions
44
Order Instructions
Type
Order No.
A
B
C
D
E
D1-06I
PD 20636
G1/8 i
22
8
Ø 15
Ø 12
D1-06
KY 2010
G1/8
21
6
Ø 11
Ø8
D1K-06
KY 2260
G1/8
10
6
Ø 12
-
D1-08
KY 2011
G1/4
27
8
Ø 14
Ø 10
D1K-08
KW 0705
G1/4
12
8
Ø 15
-
D1-10
KY 2012
G3/8
38
8
Ø 18
Ø 15
D1K-10
KW 0706
G3/8
12
8
Ø 20
-
D1-15
KY 2013
G1/2
44
10
Ø 24
Ø 19
D1-20
KY 2014
G3/4
63
12
Ø 30
Ø 20
D1-25
KY 2015
G1
77
15
Ø 36
Ø 25
Exhaust Silencers, Plastic Series D1..K
Characteristics
Characteristics
Symbol Unit
Exhaust Silencers
M5 – G1
Description
General Features
Type
Single-chamber principle
Port size
G1/8
ϑmax
Ambient
temperature range
°C
G1/4
G3/8
G1/2
G3/4
G1
-30 to +80
Material
Polyethylene
Grain size
mm
0.3 to 0.6
Medium
Highly resistant to most media, but not to
chlorinated hydrocarbons (trichloroethylene,
perchloroethylene or hydrogen tetrachlorides)
Operating pressure
pmin
range
pmax
bar
bar
0
8
Dimensions Type: D1....K
Port size G1/8–G1
Exhaust silencers disperse
the exhaust air, reduce
exhaust noise and prevent
the ingress of dirt into
components
H1
These exhaust silencers are
recommended for use in
environments where particle
deposition might block the
pores of sintered bronze
silencers, e.g. in the cement
and concrete industry
G
Æ
F
Order Instructions
Order Instructions
Type
Order No.
G
Ø
F
H1
D1-M5K
KY8830
M5
6.7
3.4
20.4
D1-06K
KY8831
G1/8
12.7
6.7
34
D1-08K
KY8832
G1/4
15.5
8.2
42.5
D1-10K
KY8833
G3/8
18.4
12.1
67.5
D1-15K
KY8834
G1/2
23
14
78
D1-20K
KY8835
G3/4
38.9
14.9
131
D1-25K
KY8836
G1
49.4
20
160
Noise reduction for a G1/2 valve with exhaust silencer and p = 6 bar
Octave band sound pressure levels
[db re 2x105N/m2]
90
exhaust to atmosphere
80
70
silenced exhaust
60
50
40
30
63
125
250
500
1000
2000 4000 8000
Octave band centre frequences [Hz]
Dimensions in mm
45
Strainers for Tubing
Series SFS
Characteristics
Symbol Unit
Description
General Features
Series
Filter element for solid particles
G3/8
G1/2
G3/4
G1
Weight (Mass)
kg
G1/8 G1/4
0.170 0.170 0.155
0.165
0.285
0.460 0.690 1.010 1.535
Pore size
µm
45
Port size
Mounting
horizontal, sieve facing dows
ϑmin
ϑmax
Medium and
ambient temperature
°C
°C
0
+150
Material
For direct installation in tubings
Brass (Filter element: sinter bronze)
Operating pressure
pmin
range
pmax
Nominal flow 1)
Recommended
flow 1)
1)
G11/4 G11/2 G2
QN
Q
bar
bar
–1
+16
l/min
l/min
1500
750
1700
783
3700
1320
7500
2570
12000 auf
auf
auf
auf
3670 Anfrage Anfrage Anfrage Anfrage
at 6 bar and ∆p=0,2 bar
Operating Principle
When air flows through the
filter element, any large
particles are retained.
The pore size for the sinterbronze filter element is
45 µm
Dimensions
SW 1
A
C
Housing
H
B
Strainers
G1/8 – G2
Characteristics
D
Filter
element
Æ
Seal
SW 2
Plug
Dimension Table
Dimen- Port size (A)
sion
G1/8
G1/4
G3/8
G1/2
G3/4
G1
G11/4
G11/2
G2
øD
B
C
H
SW 1
SW 2
10
40
55
10.3
21
20
15
40
58
10.5
25
20
20
50
70
12.0
31
27
25
60
90
17.0
38
32
32
68
96
17.5
49
35
40
75
106
17.5
55
38
50
90
126
20
68
46
8
40
55
10.0
21
20
8
40
55
10.0
21
20
Order Instructions
Port size
G1/4
G3/8
G1/2
G3/4
G1
G11/4
G11/2
G2
46
Strainers with
sinter bronze filter element
Typ
Bestell-Nr.
SFS-1/4
KL 2001
SFS-3/8
KL 2002
SFS-1/2
KL 2003
SFS-3/4
KL 2004
SFS-1
KL 2005
SFS-1 1/4
KL 2006
SFS-1 1/2
KL 2007
SFS-2
KL 2008
Spare parts
Sinter element
Typ
SFSE-1/4
SFSE-3/8
SFSE-1/2
SFSE-3/4
SFSE-1
SFSE-1 1/4
SFSE-1 1/2
SFSE-2
(45 µm)
Bestell-Nr.
KL 2015
KL 2015
KL 2015
KL 2016
KL 2017
KL 2018
KL 2019
KL 2020
Seals
Typ
SFDI-1/4
SFDI-3/8
SFDI-1/2
SFDI-3/4
SFDI-1
SFDI-1 1/4
SFDI-1 1/2
SFDI-2
Bestell-Nr.
KL 7002
KL 7002
KL 7002
KL 7003
KL 7004
KL 7005
KL 7006
KL 7007
Srew-In Sieves
Series SB
Dimension Table
Port size
Pore size
M5
0.27 mm
G1/8
Material
Order Instructions
Type
Order No.
Housing: brass
SB-M5-G
KY2330
Sieve: bronze
SB-1/8-G
KY2008
SB-1/4-G
KY2007
G1/4
Screw-In Sieve
M5 – G1/4
lathed version with fitted
sieve
Dimension Table
Port size
Mesh dimension
Material
Order Instructions
Type
Order No.
G1/4
0,27 mm
Housing: brass plate
SB-14
KW0723
Sieve: brass
SB-38
KY2097
SB-12
KY2098
G3/8
G1/2
Screw-In Sieve
G1/4 – G1/2
plate version with flanged
sieve
Dimensions in mm
47
48
Druckschalter
Pressure Switches
■ Pressure switches, pneumatic
■ Pressure switches, electronic
49
Pressure Switches
Pneumatic, Screw Terminal Series 801, 802
Characteristics
Pressure Switches
Pneumatic
G1/8, G1/4
Characteristics
Symbol Unit
Description
Type Break contact
801-..-01
801-..-1
801-..-10
Make contact
802-..-01
802-..-1
802-..-10
Setting range
p min/max bar
-0.1 to -0.95*
0.1-1
1-10
Safety pressure relief
pmax
50
100
100
bar
Port size
G1/8 external, G1/4 external
Weight (mass)
kg
0.09
Material
Housing: galvanised steel, plastic
Diaphragm: Buna N
Medium and
ambient
temperature range
ϑmin
ϑmax
Consistency
Switch back difference
P
1
2
Break contact
°C
°C
-20
+100
%
5-10**
%~
5**
Voltage
U
V
max. 250
Current
I
A
max. 2
Electrical connection
Screw terminal, protective cap Pg7
Electrical protection
P
1
IP65
Switching frequency
2
Make contact
s/min
200
* for vacuum operation
** refers to increasing pressure
Dimensions
A
ca.40
Switching function:
Make contact
– closes the circuit when
the set pressure is reached
ø22
View A
(without plug)
Break contact
– interrupts the circuit when
54
PG 7
9
SW 24
A
Order Instructions
Order Instructions
Order No.
Port Size
A
Function
Setting range
KL3010
G1/8
Break contact
-0.2 to -1
801-1/4-01
KZ 3791
G1/4
802-1/8-01
KL3011
G1/8
802-1/4-01
KZ 3792
G1/4
801-1/8-1
KL3012
G1/8
801-1/4-1
KZ 3793
G1/4
802-1/8-1
KL3013
G1/8
802-1/4-1
KZ 3794
G1/4
801-1/8-10
KL3014
G1/8
801-1/4-10
KZ 3795
G1/4
802-1/8-10
KL3015
G1/8
802-1/4-10
KZ 3796
G1/4
Type
801-1/8-01
50
(for vacuum operation)
Make contact
Break contact
0.2-1
Make contact
Break contact
Make contact
1-10
Pneumatic, Flat Pin Plug Series 803, 804
Characteristics
Characteristics
Symbol Unit
Description
Type Break contact
803-..-1
803-..-10
Make contact
804-..-1
804-..-10
Setting range
pmin/max bar
-0.1-1
1-10
pmax
100
100
bar
Port size
Pressure Switches
Pneumatic
G1/8, G1/4
G1/8 external, G1/4 external
Weight (mass)
kg
0.09
Material
Housing: galvanised steel, plastic
Diaphragm: Buna N
ϑmin
ϑmax
Medium and
ambient
temperature range
Consistency
°C
°C
-20
+100
%
5-10*
%~
5*
Voltage
U
V
max. 250
Current
I
A
max. 2
P
Break contact
1
2
Flat pin plug, protective cap PG9
IP55
Switching frequency
s/min
P
200
*refers to increasing pressure
Make contact
1
2
Dimensions
A
ca.50
ø29
Protective cap can be turned 6 x 60°
Switching function:
Make contact
– closes the circuit when
Break contact
– interrupts the circuit when
View A
(without plug)
68,5
PG 9
9
SW 24
G1/4
Order Instructions
Order Instructions
Type
Order No.
Port Size A
Function
Setting range
803-1/8-1
KL3018
G1/8
Break contact
0.2-1
803-1/4-1
KL3094
G1/4
804-1/8-1
KL3019
G1/8
804-1/4-1
KL3095
G1/4
803-1/8-10
KL3016
G1/8
803-1/4-10
KW0721
G1/4
804-1/8-10
KL3017
G1/8
804-1/4-10
KW0722
G1/4
Make contact
Break contact
1-10
Make contact
Dimensions in mm
51
Pressure Switches
Standard Pressure Control Series G1/4..I, G1/4..P
Characteristics
Pressure Switches
Pneumatic
G1/8, G1/4
Characteristics
Symbol Unit
Description
Type – thread version
G1/4-0I*
G1/4-2I
G1/4-8I
G1/4-16I
Type – flange version
G1/4-0P*
G1/4-2P
G1/4-8P
G1/4-16P
Setting range
pmin/max bar
-1 to 0
0.2-2
0.5-8
1-16
pmax
80
80
80
80
bar
Port size
Type I: G1/4 internal, Type P: flange
Mounting
2 through-holes Ø 5.2
Installation
In any position
Weight (mass)
2
3
p
1
kg
0.275
Medium
Material
Filtered compressed air (10µm), lubricated or unlubricated
Housing
Special aluminium die casting, powder-coated
Diaphragm, seals
Buna N
Medium and
ambient
temperature range
Consistency
ϑmin
ϑmax
°C
°C
-10
+80
%
±2 in relation to end-of-range value
See diagram
Features
– suited for intrinsically
safe operation
– especially compact
design
– high switching frequency
– attractive design
– Shockproof up to 30 g
Hysteresis, vacuum
version
%
<15
Vibration resistance
g
10 (10 ... 2000 Hz)
Shock resistance
Voltage
U
g
30
V
max. 250
Voltage type
AC and DC
Operating current and
operating voltage for
category of use
AC12
AC14
DC12
DC13
to EC
CE marking
Pin 1 – 3:
rising pressure makes
contact
Pin 1 – 2:
rising pressure breaks
contact
Switching element
IP
Switching frequency
s/min
*
to VDE0660 4A at 250 VAC
to VDE0660 1A at 250 VAC
to VDE0660 3A at 28 VDC
to VDE0660 1A at 28 VDC
Directive 73/23/EWG
Connector to DIN 43650, Form A, ISO4400
oder M12x1 – 4-pin
65
Pole-changing switch with catch spring as switching
element, with self-cleaning contacts
max. 200
for vacuum operation
Selection and Mounting Notes
Range selection:
Selection is optimal when
the switching points are in
the middle of the switching
range.
Electrical connection:
Wiring according to VDE
regulations.
Tightening torque for plug:
0.7 ± 0.1 Nm
Outdoor use only with
sufficient protection against
critical environmental
conditions
Scope of delivery
[bar]
Max. diameter of the
pressure opening 3 mm.
The flange version (surface
roughness of flange surface
12µm) is supplied with an
O-ring 5 x 1.5mm and
2 screws 5 x 35 DIN 912.
Minimum thread length to
be used: 4 mm.
1,0
0-16 bar
0,5
0
0,5-8 bar
0,2-2 bar
0
5
Switching point
52
(e.g. aggressive atmosphere, salty environments,
high temperature changes).
10
15
p [bar]
Dimensions
(Version with internal thread and plug to DIN 43650)
Dimensions
(Flange version with plug to DIN 43650)
~76
~76
40
+
-
Ø30
+
+
-
39,8
39,8
M5
20
Ø 5,2
G1/4*
31
-
83,6
83,6
-
40
20
+
Ø30
20
20
4,5
31
30
30
* Thread: 11 mm deep
G1/4 *
-
31
39,8
M12x1
20
31
+
-
M5
20
32,9
Ø 5,2
83,6
M12x1
+
-
Ø30
20
+
-
36
5
39,8
+
Ø30
83,6
36
5
Dimensions
(Flange Version with connector M12x1)
32,9
Dimensions
(Version with internal thread and connector M12x1)
20
4,5
30
30
* Thread: 11 mm deep
Order Instructions
Order Instructions
Setting range [bar]
Order Instructions
Type
Order No.
Setting range [bar]
Order Instructions
Type
Order No.
-1 to 0
G1/4-0I-DIN
KL3200
-1 to 0
G1/4-0P-DIN
-1 to 0
G1/4-0I-M12
KL3208
-1 to 0
G1/4-0P-M12 KL3212
0.2 to 2
G1/4-2I-DIN
KL3201
0.2 to 2
G1/4-2P-DIN
0.2 to 2
G1/4-2I-M12
KL3209
0.2 to 2
G1/4-2P-M12 KL3213
0.5 to 8
G1/4-8I-DIN
KL3202
0.5 to 8
G1/4-8P-DIN
0.5 to 8
G1/4-8I-M12
KL3210
0.5 to 8
G1/4-8P-M12 KL3214
1.0 to 16
G1/4-16I-DIN KL3203
1.0 to 16
G1/4-16P-DIN KL3207
1.0 to 16
G1/4-16I-M12 KL3211
1.0 to 16
G1/4-16P-M12 KL3215
Pressure connection
adapter
Damping prechamber
G1/4
25
41
44
10
SW 22
10
SW 22
G1/4
G1/2
KL3204
KL3205
KL3206
Plugs to DIN 43650, Form A, ISO 4400
Description
Order Instructions
Type
Order No.
Standard version
GSD-30DS
KL3349
Version with LEDs 24V
GSD-30DSL24V
KL3350
Version with LEDs 230V
GSD-30DSL230V KL3351
G1/4
Æ21,5
Type: DP-1412
Order No. KL9232
Type: DVK-1414
Order No. KL9231
Standard version
Version with LEDs
Dimensions in mm
53
Pressure Switches
Magic Pressure Control Series MPC
Characteristics
Pressure Switches
Electronic
Characteristic
Symbol Unit
Type
Setting range
pmin/max bar
Description
MPC-V*
MPC
-1 to 1
0 to 10
Switching point
%
0-100 of maximum. value, adjustable
Switch-back point
%
0-100 of maximum value, adjustable
Safety pressure relief pmax
bar
10
Mounting
30
By flange (see dimensions drawing)
Display
3 1/2 digit
Linearity
%
Installation
< 0.2 ± 1 digit
In any position
Shockproof up to
g
25
Weight (mass)
kg
0.01
Medium
0.05
Material
Actuation: electrical
Housing
Zinc die-casting
Diaphragm
Magic Pressure Control
The magic pressure control is
an electronic pressure control,
monitoring and regulating
device. Basically, it consists
of a pressure connection with
a pressure sensor and
integrated control electronics.
Applications
– Pneumatic control
systems
– Pressing technology
– Welding technology
– Packing machines and
filling systems
– Test systems
– Clamping systems
– Plastic blow-moulding
machinery
– Robotics and handling
industry
Features
– independent of switch
back point of set value
– Switching point can be set
without compressed air
(independent of location)
– LED display
– Switching time < 5 ms
– long service life
– easy handling
– display of system pressure
– adjustable hysteresis
– adjustable switching
window (Window Mode)
– Shockproof up to 25 g
54
Buna N
Ambient
temperature range
ϑmin
ϑmax
°C
°C
-10
+60
Medium
temperature range
ϑmin
ϑmax
°C
°C
–10
+60
%
0.4 of end value / 10 K
%
0.2 of end value / 10 K
V
18 to 32 V reverse pole-proof
Temperature variation
of the zero point
Temperature variation
of the set range
Voltage
U
Voltage type
Direct current
Allowable residual ripple
%
10 (within 18-32 V)
Power consumption
mA
< 50 (excluding load current)
Switching type
Open collector, potentially bound switching to Ub,
suitable for inductive loads
Output voltage
Supply voltage – 1.5 V
Switching current
Imax
Switching time
A
1 (short circuit-proof)
ms
<5
Service life
100 million switching operations
Switching logic
Signal when pressure rises, if SP > RP
Signal when pressure falls, if SP < RP
EM emission
To EN 50081. part 1
EM resistance
To EN 50082. part 2
Plug to DIN 43650
* for vacuum operation
IP
65 (with plug to DIN 43650)
Dimensions
Circuit Diagram
47
p
3 UOUT
+24V
50
1
30
IMAX= 1A
=
EEPROM
(SP, RP)
OV
115
2
SP
PE
SP RP
15
5,2
RP
1,2
8
20
Display test
Each time the power is
switched on, the display is
tested for 2 - 3 seconds.
During this test all elements
of the display are shown,
and the following appears:
1
0
Order Instructions
p
Setting Range
[bar]
Order Instructions
Type
Order No.
-1 to 1
MPC-V
KL3003
0 to 10
MPC
KL3002
Adjusting the switching points and switching pressure differences
Setting the switching points
Setting the switch-back point
Example 1
Example 1
Q
p
or Example 2
Q
p
Press button (SP) and keep
it pressed down. The display
will show the current
switching pressure and the
dotted line will blink as long
as the button remains
pressed.
Using the arrow keys, you
can adjust the switching
point up or down. Keeping
the arrow keys pressed
down longer will increase
the adjustment speed.
When the arrow key is
released the switching
pressure stops. When the
button (SP) is released, the
set value is stored and
active. The current pressure
value is displayed and the
dotted line stops blinking.
Press button (RP) and keep it
pressed down. The display
shows the current switchback pressure and the dotted
line will blink as long as the
button remains pressed
down.
Q
p
or Example 2
Q
p
Adjust the pressure with the
arrow keys as described
earlier.
When adjusting the settings,
it can happen that the
hysteresis diagram changes
its mode. This occurs when
the set switch-off pressure is
higher than the switch-on
pressure. Once both points
are set correctly, the hysteresis diagram reverts to its
correct mode.
You can switch between SP
and RP until the settings are
correct.
Dimensions in mm
55
Pressure Switches
Magic Pressure Control Series MPC
Adjusting the switching points and switching pressure differences
Setting access protection
Coding:
The pressure switch is protected from unauthorised
access with a four-digit
code.
To access the code setting
mode, press buttons SP
and RP simultaneously
during the display test. Release SP and RP after the
display test has been
completed. The display will
now blink »Cod«.
The code consists of four
digits, each digit consisting
of a combination of 1 to 4
keys. Each of the four
positions can now be set.
Once a position has been
set, the display will show »
– «.
If the display shows
» – – – – « the code has
been set. It can be stored
by pressing SP.
The switching and switchback points can then only
be adjusted by entering the
code.
When access protection is
enabled, the switching and
switch-back points can still
be displayed by pressing
the buttons, but when an
attempt to change the
settings is made, the
display will show »Code«,
and the code must be
entered. When the code is
correct, the switching and
switch-back points can be
adjusted.
Removing access
protection
To remove the code, press
SP and simultaneously
during the display test.
Release the buttons SP and
after the display test has
been completed. The
display will show »Code«.
Now enter the the current
code and the display will
show »CLC«. The pressure
switch is then no longer
protected from
unauthorised access.
Setting a damping
time factor
Adjusting the pressure
switch to ambient
pressure = 0.
A damping time factor can
be set to avoid the
evaluation of each and
every single change in
pressure. By adjusting the
damping time factor,
pressure changes are only
processed if they last
longer than the set time.
To set the damping time,
press SP during the display
test.
Release the SP button after
the display test has been
completed. The display
now shows the damping
time in milliseconds
(e.g. t01).
Using the arrow keys , ),
the damping time can be
changed to 03, 06, 12 or 24
ms. Store the desired
setting
by pressing SP.
Press RP during the display
test, and release it after the
test has been completed.
The display will indicate
»OFS«. Using the arrow
keys ( , ), the pressure
indicator can be set to 0
and the setting can be
stored with SP.
Hysteresis operation
If a fixed hysteresis is
desired instead of the
switch-back point, it can be
set to your specifications.
Press SP and
simultaneously during the
display test, and release
them once the test has
completed. The display will
now show the operation
mode. Use the arrow keys
, to change the mode
until the display shows
HYS. Store the operation
mode by pressing SP.
Pressing SP will now allow
you to display the set
switching point and change
it with the arrow keys , .
Pressing RP will now allow
you to display the
hysteresis and change it
with the arrow keys , .
Position of the Control Elements
Negative hysteresis means:
Signal at rising pressure
(Example 1)
Example 1
LED for Switching
output
Switching
point button
Switch-back
point button
56
SP
RP
Example 2
Pressure indication
1
0
Positive hysteresis means:
Signal at falling pressure
(Example 2)
p
Diagramm for
switching function
Increase button
for switching/
switch-back point
Decrease button
for switching/
switch-back point
1
Hysteresis negative
0
1
p
Switching point
Hysteresis positive
0
p
Switching point
If the switching point is
changed, the switch-back
point will be adjusted
automatically by the value
of the set hysteresis.
Operating Instructions
Troubleshooting
Display of hardware errors / malfunctions
Message
Meaning
Possible causes / Solutions
O.Er
output error
Output error: capacity switch malfunction, feedback to processor interrupted.
Repair required.
E.Er
E2PROM error
E2PROM error: component defective or connection to processor malfunctioning.
Repair required.
I.Er
init. error
Initialisation data check-sum error.
Solution: enter any SETUP-function and exit with “SP”.
As the error was caused by a data error, all SETUP settings should be checked and if
necessary corrected.
C.Er
cali. error
Calibration data check-sum error.
New calibration required.
SC.L
short circuit low
Short circuit output to mass.
Check wiring. The power supply for the connected load may be too weak.
(voltage collapse especially with loads with a high initial power
consumption or capacity)
UFL
underflow
The current pressure is below the measuring range.
Increase the pressure until it is within range.
OFL
overflow
The current pressure is above the measuring range.
Reduce the pressure until it is within range.
Display of hardware errors / malfunctions (can be switched off)
SC.H
short circuit high Short circuit output to power supply.
Check wiring, if the switching wire of the user (e.g. electrical control circuit, PLC, etc) is kept
on a potential of > 3V, or if multiple pressure switches are used in parallel, this function
should be switched off (press during display test, then SP).
U.Lo
voltage low
Operating voltage too low (Vcc < 15 V).
Check power supply, load may be too high
(switch off
during display test, then SP)
Messages during initialisation of SETUP functions
Cod
code
Request for entering code, or code programming.
CLC
clear code
Delete current code.
txx
Set damping time factor.
xx = Delay of switching output.
xx = (03, 06, 12, 24) in ms
OFS
offset
Request for Offset calibration with
or
SC.H
short circuit high Short circuit monitoring activated.
U.LO
voltage low
Voltage monitoring activated.
OFF
off
Short circuit / voltage monitoring off.
Std
Standard mode
Standard mode active
HYS
Hysteresis mode Hysteresis mode active
FEn
Window mode
button.
Window mode active
Dimensions in mm
57
58
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Metal push-in fittings
Plastic push-in fittings
Compression fittings
Banjo bolts
Standard fittings for general installation
work
Sealing rings and tapes
Tube/ hose fittings
Tubing
Tubing accessories
Air line accessories (see below)
Quick release couplings, self-sealing
3/2 way slide valves
Manifolds with integrated ball valves
Ball valves
Blow guns
59
Overview
Contents
Metal push-in fittings.........................................................................................................
Plastic push-in fittings........................................................................................................
Compression fittings, banjo bolts....................................................................................
Standard fittings for general installation work.............................................................
Sealing rings and tapes.....................................................................................................
Tube/ hose fittings...............................................................................................................
Tubing......................................................................................................................................
Tubing accessories...............................................................................................................
Air line accessories (see below)......................................................................................
Quick release couplings, self-sealing.............................................................................
3/2 way slide valves, Series HS......................................................................................
Manifolds with integrated ball valves, Series VL........................................................
Ball valves, Series KH, KHE, KHM...................................................................................
Blow guns, Series BP...........................................................................................................
60
Pages 59–120
61–69
71–82
82–84
85–94
95–105
105, 106
107, 108
109–111
112–113
115–120
115–117
118
118
119,120
120
Metal Push-in Fittings
Connection System for Fast
Assembly / Dismantling without
Tools
■ Metal fittings (nickel-plated brass)
■ Tubing clamped on outside diameter
by precision collet
■ Tubing sealed on outside diameter
by O-rings
■ Integrated O-rings (on types with parallel
thread) for reliable thread sealing
(e.g. on bevelled or uneven surfaces) and
easier handling (no additional seal rings
required)
■ Connecting the tubing: simply push the tube
into the collet up to the stop
■ Disconnecting the tubing: push the release
ring back and pull the tube out
Technical Data
Connecting thread*
M5, G1/8, G1/4, G3/8, G1/2 (parallel and taper)
Tubing outside diameter *
Ø4, Ø5, Ø6, Ø8, Ø10, Ø12, Ø14
Material
Body: nickel-plated brass; O-rings: NBR
Operating pressure range
0 to 18 bar
Temperature range
-10°C to +80°C (other temperature ranges on request)
Medium
Compressed air (other media on request)
* depending on version
Tubing Recommendations1)
Tubing type
Calibrated tubing, surface hardness min. 65 Shore
Tubing outside diameter*
Ø4, Ø5, Ø6, Ø8, Ø10, Ø12, Ø14
Tubing tolerances
(outside diameter)
Ø4, Ø5: +0.05,
Tubing material
PA 12 or similar
1)
-0.07
Ø6 to Ø14: +0.05, -0.1
see our range of tubing (Type PS-..) in Section on Tubing and Hoses, pages 109–111
Dimensions in mm
61
Straight Adaptor, male parallel thread with O-ring
L
∅D1
G
∅D
∅DA
SW
SW1
L1
Order Instructions
Tube
Type
Order No. ØDA *
G
SW
SW1
ØD
ØD1
L
L1
GS-54Msv
GS-184Msv
GS-144Msv
GS-55Msv
GS-185Msv
GS-145Msv
GS-56Msv
GS-186Msv
GS-146Msv
GS-188Msv
GS-148Msv
GS-388Msv
GS-1410Msv
GS-3810Msv
GS-1412Msv
GS-3812Msv
GS-1210Msv
GS-1212Msv
GS-1214Msv
M5
G1/8
G1/4
M5
G1/8
G1/4
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/4
G3/8
G1/2
G1/2
G1/2
11
12
11
12
13
13
14
15
15
17
17
19
19
17
21
23
2.5
3.0
3.0
2.5
3.0
3.0
2.5
4.0
4.0
5.0
6.0
6.0
7.0
8.0
7.0
10.0
8
10.0
12.0
9.9
15
18
11
15
18
13
15
18
15.9
18
21
20
21
22
22
26
26
26
10
10
10
11.5
11.5
11.5
12.5
12.5
12.5
14
14
14
16.5
16.5
19
19
16.5
19
21.5
23
22
22
23
23
24
25
28
27
30
28.5
28.5
34.5
31.5
36
37.5
32
35
40.5
4
6
8
4
6
8
4
6
8
6
8
9
8
9
6
9
11
11
11
KW 0006
KW 0007
KW 0861
KW 0008
KW 0009
KW 0010
KW 0011
KW 0012
KW 0013
KW 0014
KW 0015
KW 0016
KW 0017
KW 0018
KW 0019
KW 0020
KW 0982
KW 0021
KW 0022
4
4
4
5
5
5
6
6
6
8
8
8
10
10
12
12
10
12
14
Straight Adaptor, male taper thread
L
G
∅D
∅DA
SW1
L1
SW
Order Instructions
Tube
Type
Order No. ØDA *
G
SW
SW1
ØD
L
L1
GSK-184Msv
GSK-186Msv
GSK-146Msv
GSK-188Msv
GSK-148Msv
GSK-388Msv
GSK-1410Msv
GSK-3810Msv
GSK-3812Msv
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R3/8
2.5
2.5
4
5
6
6
7
7
7
10
12
14
14
14
17
17
17
19
10
11.5
11.5
14.5
14.5
14.5
16.5
16.5
19
21
24
26
28
28
28
30
30.5
33
7.5
7.5
11
7.5
11
11
11
11
11
Tube
Order Instructions
Type
Order No. ØDA *
G
SW
ØD
L
L1
MS-184Msv
MS-185Msv
MS-186Msv
MS-146Msv
MS-188Msv
MS-148Msv
MS-1410Msv
G1/8
G1/8
G1/8
G1/4
G1/8
G1/4
G1/4
11
11
13
13
14
14
17
14
14
15
17
17
17
20
28.5
28.5
30.5
33
31.5
34
36
7
7
7
8
7
8
8
KW 0001
KW 0002
KW 0003
KW 0004
KW 0005
KW 0862
KW 0863
KW 0864
KW 0865
4
6
6
8
8
8
10
10
12
Pressure Gauge Adaptor
L
SW
62
∅D
* = Tube ØOD
G
∅DA
L1
KW 0030
KW 0031
KW 0032
KW 0033
KW 0034
KW 0035
KW 0036
4
5
6
6
8
8
10
Elbow Adaptor, male taper thread
Order Instructions
Tube
Type
Order No. ØDA *
G
SW
ØD
L
L1
L2
LSK-184Msv
LSK-186Msv
LSK-146Msv
LSK-188Msv
LSK-148Msv
LSK-388Msv
LSK-1410Msv
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
10
10
10
12
12
14
14
10
12.5
12.5
14
14
14
16.5
22.5
24.5
24.5
27.5
27.5
29
31.5
16
16
18.5
17
20
22.5
22
6
6
9.5
6
10
10
8.5
KW 0037
KW 0038
KW 0039
KW 0040
KW 0041
KW 0042
KW 0043
L1
L2
SW
L
G
4
6
6
8
8
8
10
Elbow Adaptor, swivelling, male parallel thread with O-ring
ØD
ØD1
L
L1
L2
8
13
8
13
16
9
13
16
13
16
19
16
19
22
16
22
22
22
62
10
10
11.5
11.5
11.5
12.5
12.5
12.5
14
14
14
16.5
16.5
16.5
19
19
21.5
21.5
9
15
9
15
18
9
15
18
15
18
22
18
22
26
18
22
26
26
22.5
22.5
23
23
23
24.5
24.5
26
27.5
27.5
29.5
31.5
31.5
31.5
34.5
34.5
37.5
37.5
19
21
19
21
25
17.5
21
25
22.5
25
30.5
27
30.5
30
28
31.5
35
34.5
4
6
4
6
8
4
6
8
6
8
9
8
9
11
8
9
11
11
∅DA
∅D
SW
L1
L
4
M5
4
G1/8
5
M5
5
G1/8
5
G1/4
6
M5
6
G1/8
6
G1/4
8
G1/8
8
G1/4
8
G3/8
10
G1/4
10
G3/8
10
G1/2
12
G1/4
12
G3/8
12
G1/2
14
G1/2
Type ESS on page
SW
G
LDS-54Msv
KW 0049
LDS-184Msv KW 0050
LDS-55Msv
KW 0051
LDS-185Msv KW 0052
LDS-145Msv KW 0053
LDS-56Msv
KW 0872
LDS-186Msv KW 0054
LDS-146Msv KW 0055
LDS-188Msv KW 0056
LDS-148Msv KW 0057
LDS-388Msv KW 0058
LDS-1410Msv KW 0059
LDS-3810Msv KW 0060
LDS-1210Msv KW 0983
LDS-1412Msv KW 0061
LDS-3812Msv KW 0062
LDS-1212Msv KW 0873
LDS-1214Msv KW 0835
For frequent swivelling, see
G
∅D1
Order Instructions
Tube
Type
Order No. ØDA *
L2
∅DA
∅D
Extended Elbow Adaptor, swivelling, male parallel thread with O-ring
SW
ØD
ØD1
L
L1
L2
LDSL1-186Msv
LDSL1-146Msv
LDSL1-188Msv
LDSL1-148Msv
* = Tube ØOD
6
6
8
8
G1/8
G1/4
G1/8
G1/4
13
14
13
14
12.5
12.5
14
14
15
18
15
18
24.5
24.5
27.5
27.5
38
41
41
44
6
8
6
8
KW 0756
KW 0757
KW 0754
KW 0755
L1
SW
L
G
G
Tube
ØDA *
∅D1
Order Instructions
Type
Order No.
L2
∅DA
∅D
Dimensions in mm
63
Elbow Adaptor, swivelling, male taper thread
Order Instructions
Tube
Type
Order No. ØDA *
LDSK-184Msv KW 0044
4
R1/8
LDSK-186Msv KW 0045
6
R1/8
LDSK-146Msv KW 0046
6
R1/4
LDSK-188Msv KW 0047
8
R1/8
LDSK-148Msv KW 0048
8
R1/4
LDSK-388Msv KW 0867
8
R3/8
LDSK-1410Msv KW 0868
10
R1/4
10
R3/8
12
R3/8
For frequent swivelling, see Type ESS below
L1
L
G
SW
L2
G
SW
ØD
L
L1
L2
12
12
16
12
16
19
16
19
19
10
11.5
11.5
14.5
14.5
14.5
16.5
16.5
19
22
23.5
23.5
26.5
26.5
29
31.5
31.5
34.5
22.5
22.5
24.5
24
26.5
30
28
30
31
7.5
7.5
11
7.5
11
11.5
11
11.5
11.5
∅DA
∅D
∅D
L
L2 L3
L1
SW
∅DA
Banjo Elbow Adaptor, male parallel thread with O-ring
Order Instructions
Tube
G
Type
Order No. ØDA *
SW
ØD
ØD1
L
L1
L2
L3
ESS-54Msv
ESS-184Msv
ESS-55Msv
ESS-185Msv
ESS-186Msv
ESS-146Msv
ESS-188Msv
ESS-148Msv
ESS-1410Msv
Application: for
2
5
2
5
5
6
5
6
6
10
10
11.5
11.5
12.5
12.5
14
14
16.5
10
15
10
15
15
18
15
18
18
22.5
23.5
23.5
24.5
26.5
28.5
30
32
35
17
27
17
27
27
31.5
27
31.5
31.5
4
6
4
6
6
8
6
8
8
6.5
10.5
6.5
10.5
10.5
11.5
10.5
11.5
11.5
KW 0148
4
KW 0149
4
KW 0150
5
KW 0151
5
KW 0152
6
KW 0153
6
KW 0154
8
KW 0155
8
KW 0156
10
frequent swivelling
M5
G1/8
M5
G1/8
G1/8
G1/4
G1/8
G1/4
G1/4
G
∅D1
L
SW
¿DA
Double Banjo Elbow Adaptor, male parallel thread with O-ring
Tube
Order Instructions
Type
Order No. ØDA *
G
SW
ØD
L
L1
L2
ZSS-184Msv
KW 0887
4
ZSS-186Msv
KW 0888
6
ZSS-146Msv
KW 0889
6
ZSS-188Msv
KW 0890
8
ZSS-148Msv
KW 0891
8
ZSS-1410Msv KW 0892
10
Application: for frequent swivelling
G1/8
G1/8
G1/4
G1/8
G1/4
G1/4
5
5
6
5
6
6
14
14
18
14
18
18
25
25
27.5
30
32
34
42
42
49
42
49
49
6
6
8
6
8
8
L2
L1
* = Tube ØOD
G
¿D
64
Banjo Elbow Body, for banjo bolt*
5.2
9.9
5.2
9.9
9.9
13.3
9.9
13.3
16.3
13.3
16.8
13.3
16.8
21.5
KW 0126
KW 0127
KW 0128
KW 0129
KW 0130
KW 0131
KW 0132
KW 0133
KW 0881
KW 0134
KW 0135
KW 0882
KW 0136
KW 0883
4
4
5
5
6
6
8
8
8
10
10
12
12
12
(M5)
(G1/8)
(M5)
(G1/8)
(G1/8)
(G1/4)
(G1/8)
(G1/4)
(G3/8)
(G1/4)
(G3/8)
(G1/4)
(G3/8)
(G1/2)
ØD1
L
L1
11.5
11.5
12
12
13.5
13.5
15.5
15.5
15.5
18
18
20
20
20
9.5
14
9.5
14
14
18
14
18
21
18
21
18
21
26
23.5
25
24
24
25
27.5
30
32
32
34
36
36
39
40.5
9
15
9
15
15
17
15
17
20
17
20
17
20
24
L
∅D
RES-54Msv
RES-184Msv
RES-55Msv
RES-185Msv
RES-186Msv
RES-146Msv
RES-188Msv
RES-148Msv
RES-388Msv
RES-1410Msv
RES-3810Msv
RES-1412Msv
RES-3812Msv
RES-1212Msv
ØD
∅DA
ØB
L1
Tube
Order Instructions
Type
Order No. ØDA **
∅B
∅D1
Run Tee Adaptor, swivelling, male parallel thread with O-ring
SW
ØD
ØD1
L
L1
L2
WDS-184Msv
WDS-185Msv
WDS-186Msv
WDS-146Msv
WDS-188Msv
WDS-148Msv
WDS-1410Msv
WDS-3810Msv
WDS-3812Msv
WDS-1212Msv
G1/8
G1/8
G1/8
G1/4
G1/8
G1/4
G1/4
G3/8
G3/8
G1/2
13
13
13
16
13
16
16
19
19
22
10
11.5
12.5
12.5
14
14
16.5
16.5
19
19
15
15
15
18
15
18
18
22
22
26
22.5
23
24.5
26
27.5
27.5
31.5
31.5
34.5
34.5
21
21
21
25
22.5
25
27
30.5
31.5
32.5
6
6
6
8
6
8
8
9
9
11
4
5
6
6
8
8
10
10
12
12
L1
L
L2
L
KW 0080
KW 0081
KW 0082
KW 0083
KW 0084
KW 0085
KW 0086
KW 0087
KW 0088
KW 0877
G
G
∅D1
Order Instructions
Tube
Type
Order No. ØDA **
SW
∅DA
∅D
Branch Tee Adaptor, swivelling, male parallel thread with O-ring
ØD1
L
L1
L2
13
13
13
16
13
16
19
16
19
19
22
22
10
11.5
12.5
12.5
14
14
14
16.5
16.5
19
19
21.5
15
15
15
18
15
18
22
18
22
22
26
26
22.5
23
24.5
26
27.5
27.5
29.5
31.5
31.5
34.5
34.5
37.5
21
21
21
25
22.5
25
30.5
27
30.5
31.5
32.5
34.5
6
6
6
8
6
8
9
8
9
9
11
11
L
L
∅D
ØD
∅DA
G1/8
G1/8
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G3/8
G1/2
G1/2
page 66
SW
L2
TDS-184Msv
KW 0070
4
TDS-185Msv
KW 0071
5
TDS-186Msv
KW 0072
6
TDS-146Msv
KW 0073
6
TDS-188Msv
KW 0074
8
TDS-148Msv
KW 0075
8
TDS-388Msv
KW 0076
8
TDS-1410Msv KW 0077
10
TDS-3810Msv KW 0078
10
TDS-3812Msv KW 0079
12
TDS-1212Msv KW 0875
12
TDS-1214Msv KW 0876
14
For frequent swivelling, see Type TSS on
G
L1
Order Instructions
Tube
Type
Order No. ØDA **
G
∅D1
SW
* For banjo bolts see pages 92-94
** = Tube ØOD
Dimensions in mm
65
Banjo Tee Adaptor, male parallel thread with O-ring
SW
L
G
∅D1
L2
SW
ØD
ØD1
L
L1
L2
L3
TSS-54Msv
TSS-184Msv
TSS-55Msv
TSS-185Msv
TSS-186Msv
TSS-146Msv
TSS-188Msv
TSS-148Msv
TSS-1410Msv
Application: for
2
5
2
5
5
6
5
6
6
10
10
11.5
11.5
12.5
12.5
14
14
16.5
10
15
10
15
15
18
15
18
18
22.5
23.5
24
24.5
26.5
28.5
30
32
35
17
27
17
27
27
31.5
27
31.5
31.5
4
6
4
6
6
8
6
8
8
6.5
10.5
6.5
10.5
10.5
11.5
10.5
11.5
11.5
KW 0157
4
KW 0158
4
KW 0159
5
KW 0160
5
KW 0161
6
KW 0162
6
KW 0163
8
KW 0164
8
KW 0165
10
frequent swivelling
M5
G1/8
M5
G1/8
G1/8
G1/4
G1/8
G1/4
G1/4
∅DA
L1
L3
∅D
L
Order Instructions
Tube
D
Type
Order No. ØDA **
Banjo Tee Body, for banjo bolt*
L
∅DA
L1
∅D
L
∅B
∅D1
Tube
Order Instructions
Type
Order No. ØDA **
ØB
RDS-54Msv
KW 0137
4
RDS-184Msv
KW 0138
4
RDS-55Msv
KW 0139
5
RDS-185Msv
KW 0140
5
RDS-186Msv
KW 0141
6
RDS-146Msv
KW 0142
6
RDS-188Msv
KW 0143
8
RDS-148Msv
KW 0144
8
RDS-388Msv
KW 0884
8
RDS-1410Msv KW 0145
10
RDS-3810Msv KW 0146
10
RDS-1412Msv KW 0885
12
RDS-3812Msv KW 0147
12
RDS-1212Msv KW 0886
12
* For banjo bolts see pages 92-94
5.2
9.9
5.2
9.9
9.9
13.3
9.9
13.3
16.8
13.3
16.8
13.3
16.8
21.5
(M5)
(G1/8)
(M5)
(G1/8)
(G1/8)
(G1/4)
(G1/8)
(G1/4)
(G3/8)
(G1/4)
(G3/8)
(G1/4)
(G3/8)
(G1/2)
ØD
ØD1
L
L1
10
10
12
11.5
12.5
12.5
14
14
14
16.5
16.5
19
19
19
10
14
10
14
14
18
14
18
21
18
21
18
21
26
20
24
21.5
24
24.5
27.5
30
32
31.5
34
36
36
39
40.5
9
15
9
15
15
17
15
17
20
17
20
17
20
24
Straight Connector, threaded
∅DA
L
66
G
L
L1
GVS-4Msv
GVS-5Msv
GVS-6Msv
GVS-8Msv
GVS-10Msv
GVS-12Msv
GVS-14Msv
M13x1
M14x1
M15x1
M17x1
M20x1
M22x1
M24x1
32
32
32
39
42.5
49.5
53
9.5
10
9.5
9.5
10
11
13.5
** = Tube ØOD
G
L1
Order Instructions
Tube
Type
Order No. ØDA **
KW 0023
KW 0024
KW 0025
KW 0026
KW 0027
KW 0028
KW 0029
4
5
6
8
10
12
14
Straight Bulkhead Connector
Order Instructions
Tube
Type
Order No. ØDA *
G
SW
L
L1
M
Pmax
SOS-4Msv
SOS-5Msv
SOS-6Msv
SOS-8Msv
SOS-10Msv
SOS-12Msv
SOS-14Msv
M13x1
M14x1
M15x1
M17x1
M20x1
M22x1
M24x1
16
17
17
19
24
25
27
32
32
32
39
42.5
49.5
53
9.5
10
9.5
9.5
10
11.5
13.5
4
4
4
4
5
5
6
8
8
8
16
17
23
24
4
5
6
8
10
12
14
P max.
M
SW
L1
∅DA
G
KW 0101
KW 0102
KW 0103
KW 0104
KW 0105
KW 0106
KW 0107
L
Equal Elbow Connector
Type
Order Instructions
Order No..
KW 0063
KW 0064
KW 0065
KW 0066
KW 0067
KW 0068
KW 0069
ØD
L
4
5
6
8
10
12
14
10
11.5
12.5
14
16.5
19
21.5
22.5
23
24.5
27.5
31.5
34.5
37.5
Tube
ØDA *
ØD
L
4
5
6
8
10
12
14
10
11.5
12.5
14
16.5
19
21.5
22.5
23
24.5
27.5
31.5
34.5
37.5
L
L
∅DA
∅D
WS-4Msv
WS-5Msv
WS-6Msv
WS-8Msv
WS-10Msv
WS-12Msv
WS-14Msv
Tube
ØDA *
Equal Tee Connector
Type
Order Instructions
Order No.
TVS-4Msv
TVS-5Msv
TVS-6Msv
TVS-8Msv
TVS-10Msv
TVS-12Msv
TVS-14Msv
KW 0089
KW 0090
KW 0091
KW 0092
KW 0093
KW 0094
KW 0095
L
L
L
* = Tube ØOD
∅DA
∅D
Dimensions in mm
67
4-Way Cross Connector
Type
Order Instructions
Order No.
KVS-4Msv
KVS-5Msv
KVS-6Msv
KVS-8Msv
KVS-10Msv
ØD
L
4
5
6
8
10
10
11.5
12.5
14
16.5
22.5
23
24.5
27.5
31.5
L
L
L
L
KW 0096
KW 0097
KW 0098
KW 0099
KW 0100
Tube
ØDA *
∅DA
∅D
Reducing Straight Stem Connector
∅A
∅D
∅DA
L
Order Instructions
Tube
Type
Order No. ØDA *
Stem
ØA
ØD
L
R-54Msv
R-64Msv
R-84Msv
R-65Msv
R-85Msv
R-86Msv
R-106Msv
R-126Msv
R-108Msv
R-128Msv
R-148Msv
R-1210Msv
5
6
8
6
8
8
10
12
10
12
14
12
11
11
11
12
12
13
13
13
15
15
15
18
34
34.5
35.5
35
35.5
37.5
37.5
38
43
39.5
41
46
KW 0108
KW 0109
KW 0110
KW 0111
KW 0112
KW 0113
KW 0114
KW 0115
KW 0116
KW 0117
KW 0834
KW 0118
4
4
4
5
5
6
6
6
8
8
8
10
Blanking Plug
Type
VST-4Msv
VST-5Msv
VST-6Msv
VST-8Msv
VST-10Msv
VST-12Msv
VST-14Msv
* = Tube ØOD
∅A
∅D
L
68
Order Instructions
Order No.
KW 0119
KW 0120
KW 0121
KW 0122
KW 0123
KW 0124
KW 0125
ØA
ØD
L
4
5
6
8
10
12
14
5
6
7
9
11
13
15
27
27
29
34
36
37
38
Order Instructions
Order No.
VR-4
VR-5
VR-6
VR-8
VR-10
VR-12
VR-14
KW 0854
KW 0855
KW 0856
KW 0857
KW 0858
KW 0859
KW 0860
ØA
ØD
(NW)
L
4
5
6
8
10
12
14
2
3
4
6
8
10
12
32.5
33
33
35
39
44
67
L
∅A
Type
∅D
Straight Stem Connector
Dimensions in mm
69
70
Plastic Push-in Fittings
Connection System for Fast
Assembly / Dismantling without Tools
■ Cost reductions through fast assembly and
dismantling
■ No passage area reduction relative to the
diameter of the plastic tubing
■ High reliability through profile seal
■ O- ring seal on thread
■ Stainless steel collet
■ Suitable for plastic tubing and copper,
steel and stainless steel piping
■ Nickel-plated brass for optimum surface
protection
Technical Data
Connecting thread*
M3, M5, M6, G1/8, G1/4, G3/8, G1/2 (parallel and taper)
Ø3, Ø4, Ø6, Ø8, Ø10, Ø12, Ø16
Material
Body and sleeve: brass/POM
Release ring: POM
Collet: stainless steel
O-ring: NBR
0 to 10 bar (and vacuum)
Temperature range
0°C to +60°C (other temperature ranges on request)
Medium
Compressed air (vacuum)
* depending on type
Tubing type
Calibrated tubing, surface hardness min. 65 Shore
Ø3, Ø4, Ø6, Ø8, Ø10, Ø12, Ø16
Tubing material
PU, PA, PE or similar
1)
see our range of tubing (Type PS-..) in Section on Tubing and Hoses, pages 109–111
Dimensions in mm
71
A
B
L
F
SW1
SW
Order Instructions
Type
Order No.
GS-54Msv
KT0100
GS-184Msv
KT0101
GS-144Msv
KT0102
GS-56Msv
KT0103
GS-186Msv
KT0104
GS-146Msv
KT0105
GS-386Msv
KT0106
GS-188Msv
KT0107
GS-148Msv
KT0108
GS-388Msv
KT0109
GS-128Msv
KT0110
GS-1410Msv
KT0111
GS-3810Msv
KT0112
GS-1210Msv
KT0113
GS-1412Msv
KT0114
GS-3812Msv
KT0115
GS-1212Msv
KT0116
GS-3816Msv
KT0117
GS-1216Msv
KT0118
Material: nickel-plated brass
Tube
ØOD
4
4
4
6
6
6
6
8
8
8
8
10
10
10
12
12
12
16
16
Port
Size
M5
G1/8
G1/4
M5
G1/8
G1/4
G3/8
G1/8
G1/4
G3/8
G1/2
G1/4
G3/8
G1/2
G1/4
G3/8
G1/2
G3/8
G1/2
L
A
F
B
SW
SW1
21.9
21.5
23.5
23.6
22.5
24.5
25.5
26.7
26.7
25.0
26.0
30.0
27.0
28.3
32.2
31.6
31.6
36.2
36.2
4.6
6
8
4.6
6
8
8
6
8
8
9
8
8
9
8
8
9
8
9
15.9
15.9
15.9
16.5
16.5
16.5
16.5
17.7
17.7
17.7
17.7
18.6
18.6
18.6
20.9
20.9
20.9
24.7
24.7
7
8
7
8
7
9
8
8
8
9
8
8
9
8
8
16
15
3
3
4
5
5
5
6
6
6
8
8
8
8
8
8
10
10
10
13
15
12
13
15
17
15
15
17
21
17
17
21
19
19
21
24
24
A
L
F
Straight Adaptor, teflon-coated male taper thread, external hexagon
SW
Order Instructions
Tube
Type
Order No. ØOD
Port Size
L
A
F
SW
GSK-184Msv
KT0119
GSK-186Msv
KT0120
GSK-146Msv
KT0121
GSK-188Msv
KT0122
GSK-148Msv
KT0123
GSK-388Msv
KT0124
GSK-1410Msv KT0125
GSK-3810Msv KT0126
GSK-1210Msv KT0127
GSK-1412Msv KT0128
GSK-3812Msv KT0129
GSK-1212Msv KT0130
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R1/4
R3/8
R1/2
21.8
21.6
21.6
28.2
26.0
23.7
31.2
25.3
30.3
33.7
30.6
30.4
8
8
10
8
10
11
10
11
14
10
11
14
15.9
16.5
16.5
17.7
17.7
17.7
18.6
18.6
18.6
20.9
20.9
20.9
10
12
14
14
14
17
14
17
22
14
17
22
4
6
6
8
8
8
10
10
10
12
12
12
A
L
F
Straight Adaptor, teflon-coated male taper thread, hexagon socket
SW
72
Order Instructions
Type
Order No.
GSKR-54Msv
KT0131
GSKR-184Msv KT0132
GSKR-56Msv
KT0133
GSKR-186Msv KT0134
GSKR-146Msv KT0135
GSKR-188Msv KT0136
GSKR-148Msv KT0137
GSKR-388Msv KT0138
GSKR-1410Msv KT0139
GSKR-3810Msv KT0140
GSKR-1210Msv KT0141
GSKR-3812Msv KT0142
GSKR-1212Msv KT0143
Material: nickel-plated-brass
Tube
ØOD
4
4
6
6
6
8
8
8
10
10
10
12
12
Port Size
L
A
F
SW
M5
R1/8
M5
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
21.8
20.4
22.6
21.8
22.5
27.0
25.0
25.0
26.6
26.6
26.6
32.4
32.4
4.6
8.0
4.6
8.0
10.0
8.0
10.0
110.0
10.0
11.0
14.0
11.0
14.0
15.9
15.9
16.5
16.5
16.5
17.7
17.7
17.7
18.6
18.6
18.6
20.9
20.9
2
3
2
4
4
4
6
6
6
6
6
8
8
Port Size
L
A
F
SW
GMS-184Msv KT0144
GMS-186Msv KT0145
GMS-146Msv KT0146
GMS-188Msv KT0147
GMS-148Msv KT0148
GMS-388Msv KT0149
GMS-1410Msv KT0150
GMS-3810Msv KT0151
GMS-3812Msv KT0152
GMS-1212Msv KT0153
G1/8
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G3/8
G1/2
26.8
28.3
30.0
29.1
31.2
32.5
32.7
33.3
37.1
39.2
10
10
11
10
11
12
11
12
12
14
15.9
16.5
16.5
17.7
17.7
17.7
18.6
18.6
20.9
20.9
14
14
17
14
17
22
17
22
22
24
SW
A
4
6
6
8
8
8
10
10
12
12
L
Order Instructions
Tube
Type
Order No. ØOD
F
Straight Adaptor, female parallel thread
Straight Bulkhead Adaptor, female parallel thread
L
N
M
SOS-184Msv
KT0154
SOS-186Msv
KT0155
SOS-146Msv
KT0156
SOS-188Msv
KT0157
SOS-148Msv
KT0158
SOS-388Msv
KT0159
SOS-1410Msv KT0160
SOS-3810Msv KT0161
SOS-3812Msv KT0162
SOS-1212Msv KT0163
G1/8
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G3/8
G1/2
27.0
29.1
31.2
32.3
31.1
32.9
34.0
33.9
38.7
40.6
5
5
5
5
5
5
5
5
5
5
M12
M14
M14
M16
M16
M16
M20
M20
M22
M22
x
x
x
x
x
x
x
x
x
x
1
1
1
1
1
1
1
1
1
1
F
SW1 SW2
9
9
11
9
11
12
11
12
12
14
16.8
17.6
17.6
18.7
18.7
18.7
19.6
19.6
21.9
21.9
14
17
17
19
19
19
24
24
26
26
14
17
17
19
19
22
24
24
24
24
M
SW 1
SW 2
A
L
4
6
6
8
8
8
10
10
12
12
A
N
Port
Size
F
Order Instructions
Tube
Type
Order No. ØOD
L
H
A
F
SW
LDS-54KU
KT0164
LDS-184KU
KT0165
LDS-144KU
KT0166
LDS-56KU
KT0167
LDS-186KU
KT0168
LDS-146KU
KT0169
LDS-386KU
KT0170
LDS-188KU
KT0171
LDS-148KU
KT0172
LDS-388KU
KT0173
LDS-1410KU
KT0174
LDS-3810KU
KT0175
LDS-1210KU
KT0176
LDS-1412KU
KT0177
LDSD-3812KU KT0178
LDS-1212KU
KT0179
LDS-3816KU
KT0180
LDS-1216KU
KT0181
M5
G1/8
G1/4
M5
G1/8
G1/4
G3/8
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G1/4
G3/8
G1/2
G3/8
G1/2
27.3
27.4
29.4
30.3
30.6
32.6
33.6
32.9
34.9
35.9
37.4
38.4
39.4
41.4
42.4
43.4
53.8
54.8
23.8
23.8
23.8
26.5
26.5
26.5
26.5
29.7
29.7
29.7
32.1
32.1
32.1
36.9
36.9
36.9
44.2
44.2
4.6
6
8
4.5
6
8
9
6
8
9
8
9
10
8
9
10
9
10
16.8
16.8
16.8
17.6
17.6
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
21.9
23.9
23.9
10
14
17
12
14
17
20
14
17
20
17
20
24
19
20
24
24
24
4
4
4
6
6
6
6
8
8
8
10
10
10
12
12
12
16
16
H
F
A
Port
Size
L
Order Instructions
Tube
Type
Order No. ØOD
SW
Dimensions in mm
73
Elbow Adaptor, swivelling, teflon-coated male taper thread
Order Instructions
Tube
Type
Order No. ØOD
Port
Size
L
H
A
F
SW
F
LDSK-184KU
LDSK-186KU
LDSK-146KU
LDSK-188KU
LDSK-148KU
LDSK-388KU
LDSK-1410KU
LDSK-3810KU
LDSK-1210KU
LDSK-1412KU
LDSK-3812KU
LDSK-1212KU
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R1/4
R3/8
R1/2
29.8
32.8
35.8
35.2
38.2
39.2
40.3
41.3
44.3
44.7
45.7
48.7
23.8
26.5
26.5
29.7
29.7
29.7
32.1
32.1
32.1
36.9
36.9
36.9
8
8
10
8
10
11
10
11
14
10
11
14
16.8
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
21.9
10
12
14
14
14
17
17
17
22
19
19
22
SW
A
L
H
KT0182
KT0183
KT0184
KT0185
KT0186
KT0187
KT0188
KT0189
KT0190
KT0191
KT0192
KT0193
4
6
6
8
8
8
10
10
10
12
12
12
Extended Elbow Adaptor, swivelling, male parallel thread with O-ring
H
L
F
A
SW
Order Instructions
Tube
Type
Order No. ØOD
Port
Size
L
H
A
F
SW
LDSL-54KU
KT0194
LDSL-184KU
KT0195
LDSL-144KU
KT0196
LDSL-56KU
KT0197
LDSL-186KU
KT0198
LDSL-146KU
KT0199
LDSL-386KU
KT0200
LDSL-188KU
KT0201
LDSL-148KU
KT0202
LDSL-388KU
KT0203
LDSL-1410KU KT0204
LDSL-3810KU KT0205
LDSL-1210KU KT0206
LDSL-1412KU KT0207
LDSL-3812KU KT0208
LDSL-1212KU KT0209
M5
G1/8
G1/4
M5
G1/8
G1/4
G3/8
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G1/4
G3/8
G1/2
38.8
39.4
41.4
44.3
45.6
47.6
48.6
50.9
52.9
53.9
57.4
58.4
59.4
66.4
67.4
68.4
23.8
23.8
23.8
26.5
26.5
26.5
26.5
29.7
29.7
29.7
32.1
32.1
32.1
36.9
36.9
36.9
4.6
6
8
4.6
6
8
9
6
8
9
8
9
10
8
9
10.0
16.8
16.8
16.8
17.6
17.6
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
21.0
10
14
17
12
14
17
20
14
17
20
17
20
24
19
20
24
4
4
4
6
6
6
6
8
8
8
10
10
10
12
12
12
Extended Elbow Adaptor, swivelling, teflon-coated male taper thread
H
A
L
F
74
SW
Order Instructions
Tube
Type
Order No. ØOD
Port
Size
L
H
A
F
SW
LDSLK-184KU
KT0210
LDSLK-186KU
KT0211
LDSLK-146KU
KT0212
LDSLK-188KU
KT0213
LDSLK-148KU
KT0214
LDSLK-388KU
KT0215
LDSLK-1410KU
KT0216
LDSLK-3810KU
KT0217
LDSLK-1210KU
KT0218
LDSLK-1412KU
KT0219
LDSLK-3812KU
KT0220
LDSLK-1212KU
KT0221
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R1/4
R3/8
R1/2
40.8
46.3
48.3
51.2
53.2
54.2
50.5
51.5
54.5
66.2
67.2
70.2
23.8
26.5
26.5
29.7
29.7
29.7
32.1
32.1
32.1
36.9
36.9
36.9
8
8
10
8
10
11
10
11
14
10
11
14
16.8
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
21.9
10
12
14
14
14
17
14
17
22
19
19
22
4
6
6
8
8
8
10
10
10
12
12
12
Run Tee Adaptor, swivelling, male parallel thread with O-ring
Port
Size
L
H
A
F
SW
WDS-54KU
KT0222
WDS-184KU
KT0223
WDS-56KU
KT0224
WDS-186KU
KT0225
WDS-146KU
KT0226
WDS-188KU
KT0227
WDS-148KU
KT0228
WDS-388KU
KT0229
WDS-1410KU
KT0230
WDS-3810KU KT0231
WDS-1210KU
KT0232
WDS-3812KU KT0233
WDS-1212KU
KT0234
M5
G1/8
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G3/8
G1/2
42.3
42.8
46.1
46.9
48.9
50.1
52.1
53.1
55.9
56.8
57.8
63.2
64.2
25.1
25.1
28.1
28.1
28.1
30.9
30.9
30.9
34.6
34.6
34.6
40.3
40.3
4.6
6
4.6
6
8
6
8
9
8
9
10
9
10
16.8
16.8
17.6
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
10
14
10
14
17
14
17
20
17
20
24
20
24
H
F
SW
A
4
4
6
6
6
8
8
8
10
10
10
12
12
L
Order Instructions
Tube
Type
Order No. ØOD
Run Tee Adaptor, swivelling, teflon-coated male taper thread
L
H
A
F
SW
WDSK-184KU
KT0235
WDSK-186KU
KT0236
WDSK-146KU
KT0237
WDSK-188KU
KT0238
WDSK-148KU
KT0239
WDSK-388KU KT0240
WDSK-1410KU KT0241
WDSK-3810KU KT0242
WDSK-1210KU KT0243
WDSK-3812KU KT0244
WDSK-1212KU KT0245
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
45.3
48.6
51.2
52.2
55.2
56.2
58.6
59.6
62.6
65.8
68.8
25.1
28.1
28.1
30.9
30.9
30.9
34.6
34.6
34.6
40.3
40.3
8
8
10
8
10
11
10
11
14
11
14
16.8
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
10
12
14
12
14
17
14
17
22
17
22
H
F
Branch Tee Adaptor, swivelling, male parallel thread with O-ring
Port
Size
L
H
A
F
SW
TDS-54KU
KT0246
TDS-184KU
KT0247
TDS-56KU
KT0248
TDS-186KU
KT0249
TDS-146KU
KT0250
TDS-188KU
KT0251
TDS-148KU
KT0252
TDS-388KU
KT0253
TDS-1410KU
KT0254
TDS-3810KU
KT0255
TDS-1210KU
KT0256
TDS-1412KU
KT0257
TDS-3812KU
KT0258
TDS-1212KU
KT0259
TDS-3816KU
KT0478
TDS-1216KU
KT0479
M5
G1/8
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G1/4
G3/8
G1/2
G3/8
G1/2
27.3
27.8
30.3
30.8
32.8
33.3
35.3
36.3
37.3
38.3
39.3
41.7
42.7
43.7
53.6
53.6
37.6
37.6
41.0
41.0
41.0
44.4
44.4
44.4
47.2
47.2
47.2
54.8
54.8
54.8
64.5
64.6
4.6
6
4.6
6
8
6
8
9
8
9
10
8
9
10
9
10
16.8
16.8
17.6
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
21.9
24.2
24.0
10
14
12
14
17
14
17
20
17
20
24
19
20
24
24
24
4
4
6
6
6
8
8
8
10
10
10
12
12
12
16
16
SW
H
F
L
Order Instructions
Tube
Type
Order No. ØOD
A
4
6
6
8
8
8
10
10
10
12
12
L
Port
Size
A
Order Instructions
Tube
Type
Order No. ØOD
SW
Dimensions in mm
75
Branch Tee Adaptor, swivelling, teflon-coated male taper thread
H
L
F
A
SW
Order Instructions
Tube
Type
Order No. ØOD
Port
Size
L
H
A
F
SW
TDSK-184KU
TDSK-186KU
TDSK-146KU
TDSK-188KU
TDSK-148KU
TDSK-388KU
TDSK-1410KU
TDSK-3810KU
TDSK-1210KU
TDSK-1412KU
TDSK-3812KU
TDSK-1212KU
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R1/4
R3/8
R1/2
29.8
32.8
35.8
35.3
38.3
39.3
41.6
42.9
45.5
44.7
45.7
48.7
37.6
41.0
41.0
44.4
44.4
44.4
50.6
50.6
50.6
54.8
54.8
54.8
8
8
10
8
10
11
10
11
14
10
11
14
16.8
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
21.9
10
12
14
12
14
17
14
17
22
14
17
22
KT0260
KT0261
KT0262
KT0263
KT0264
KT0265
KT0266
KT0267
KT0268
KT0269
KT0270
KT0271
4
6
6
8
8
8
10
10
10
12
12
12
Material: plastic, nickel-plated brass
Parallel Y Adaptor, swivelling, male parallel thread with O-ring
L
F
H
A
SW
Order Instructions
Tube
Type
Order No. ØOD
Port
Size
L
H
A
F
SW
YDS-54KU
YDS-184KU
YDS-56KU
YDS-186KU
YDS-146KU
YDS-188KU
YDS-148KU
YDS-388KU
YDS-1410KU
YDS-3810KU
YDS-1210KU
YDS-3812KU
YDS-1212KU
Material: plastic,
M5
G1/8
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G3/8
G1/2
34.8
41.0
41.6
42.4
44.4
43.7
45.7
46.7
51.3
52.3
53.3
55.8
56.8
21
21
25
25
25
29
29
29
35
35
35
41
41
4.6
6
4.6
6
8
6
8
9
8
9
10
9
10
16.8
16.8
17.6
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
10
14
12
14
17
14
17
20
17
20
24
20
24
KT0272
4
KT0273
4
KT0274
6
KT0275
6
KT0276
6
KT0277
8
KT0278
8
KT0279
8
KT0280
10
KT0281
10
KT0282
10
KT0283
12
KT0284
12
nickel-plated brass
Parallel Y Adaptor, swivelling, teflon-coated male taper thread
A
L
F
H
76
SW
Order Instructions
Tube
Type
Order No. ØOD
Port
Size
L
H
A
F
SW
YDSK-184KU
YDSK-186KU
YDSK-146KU
YDSK-188KU
YDSK-148KU
YDSK-388KU
YDSK-1410KU
YDSK-3810KU
YDSK-1210KU
YDSK-3812KU
YDSK-1212KU
Material: plastic,
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
41.3
44.1
47.1
45.5
48.5
48.5
54.2
56.5
58.2
58.3
62.0
21
25
25
29
29
29
35
35
35
41
41
8
8
10
8
10
11
10
11
14
11
14
16.8
17.6
17.6
18.7
18.7
18.7
19.6
19.6
19.6
21.9
21.9
10
12
14
12
14
17
14
17
22
17
22
KT0285
4
KT0286
6
KT0287
6
KT0288
8
KT0289
8
KT0290
8
KT0291
10
KT0292
10
KT0293
10
KT0294
12
KT0295
12
nickel-plated brass
Straight Connector
Order Instructions
Tube
Type
Order No. ØOD
H
L
Ø
F
GVS-4KU
GVS-6KU
GVS-8KU
GVS-10KU
GVS-12KU
GVS-16KU
Material: plastic
34.6
36.8
39.4
43.2
47.8
51.1
12.8
14.8
17.8
20.0
23.3
25.8
3.3
3.3
4.3
4.3
4.3
-
16.3
17.6
18.7
19.6
21.9
24.0
KT0296
KT0297
KT0298
KT0299
KT0300
KT0301
4
6
8
10
12
16
H
L
F
Æ
Reducing Straight Connector
Order Instructions
Tube
Type
Order No. ØOD-A
Tube
ØOD-B
H
C
D
ØE
ØF
GVSR-64KU
GVSR-86KU
GVSR-108KU
GVSR-1210KU
GVSR-1612KU
Material: plastic
4
6
8
10
12
36.6
37.6
41.0
44.0
49.2
17.6
18.7
19.6
21.9
24.2
16.8
17.6
18.7
19.6
22.9
12.5
14.5
17.5
20.5
25.7
10.5
12.5
14.5
17.5
20.7
KT0302
KT0303
KT0304
KT0305
KT0306
6
8
10
12
16
H
C
ÆE
ÆF
D
H
F
M
SOV-4Msv
KT0307
SOV-6Msv
KT0308
SOV-8Msv
KT0309
SOV-10Msv
KT0310
SOV-12Msv
KT0311
35.1
39.4
41.8
44.0
48.8
16.3
17.6
18.7
19.6
21.9
M12
M14
M16
M20
M22
4
6
8
10
12
SW
x
x
x
x
x
1
1
1
1
1
14
17
19
24
26
H
SW
F
M
Order Instructions
Tube
Type
Order No. ØOD
Dimensions in mm
77
H
H
L
Ø
F
WVS-4KU
WVS-6KU
WVS-8KU
WVS-10KU
WVS-12KU
WVS-16KU
Material: plastic
23.9
27.0
31.1
34.1
39.1
46.8
23.9
27.0
31.1
34.1
39.1
46.8
3.3
3.3
4.3
4.3
4.3
5.3
16.8
17.6
18.7
19.6
21.9
24.2
KT0312
KT0313
KT0314
KT0315
KT0480
KT0481
4
6
8
10
12
16
L
F
Order Instructions
Tube
Type
Order No. ØOD
Æ
Stem Elbow Connector
C
B
C
D
E
F
WVSN-44KU
WVSN-66KU
WVSN-88KU
WVSN-1010KU
WVSN-1212KU
WVSN-1616KU
Material: plastic
4
6
8
10
12
16
18.8
20.3
23.0
24.2
28.0
32.0
16.8
17.4
19.0
19.7
22.1
24.0
28.4
31.4
34.3
37.9
41.4
48.5
22
24
26
28
30
35
KT0482
KT0316
KT0317
KT0318
KT0319
KT0320
4
6
8
10
12
16
F
E
A
D
Order Instructions
A
Type
Order No.
B
Equal Tee Connector
H
L
F
Æ
78
Order Instructions
Tube
Type
Order No. ØOD
H
L
Ø
F
TVS-4KU
TVS-6KU
TVS-8KU
TVS-10KU
TVS-12KU
TVS-16KU
Material: plastic
36.6
41.8
44.9
48.2
56.8
68.2
24.2
27.5
30.7
34.1
39.9
47.2
3.3
3.3
4.3
4.3
4.3
4.3
16.3
17.6
18.7
19.6
21.9
24.0
KT0321
KT0322
KT0323
KT0324
KT0325
KT0326
4
6
8
10
12
16
Reducing Tee Connector
Order Instructions
Tube
Type
Order No. ØOD-A
Tube
ØOD-B
H
L
Ø
F1
F2
TVSR-108KU
TVSR-1210KU
TVSR-1610KU
TVSR-1612KU
8
10
10
12
49.2
56.0
60.8
63.7
33.5
37.6
43.1
45.5
4.3
4.3
4.3
4.3
19.6
21.9
24.0
24.0
18.7
19.6
19.6
21.9
KT0468
KT0469
KT0470
KT0471
10
12
16
16
Material: plastic
H
L
ÆA
F1
F2
Æ
ÆB
Order Instructions
Tube
Type
Order No. ØOD
H
L
Ø
F
KVS-4KU
KVS-6KU
KVS-8KU
KVS-10KU
KVS-12KU
Material: plastic
36.6
41.8
44.9
48.2
54.8
37.9
42.5
46.8
50.5
57.2
3.3
4.3
4.3
4.3
4.3
16.8
17.6
18.7
19.6
21.9
KT0483
KT0327
KT0328
KT0329
KT0330
4
6
8
10
12
H
L
F
Æ
Parallel Y Connector
L
Ø
F
ØE
YVS-4KU
YVS-6KU
YVS-8KU
YVS-10KU
YVS-12KU
Material: plastic
21
25
29
35
41
37.1
39.9
43.4
45.5
54.8
3.3
3.3
4.3
4.3
4.3
16.3
17.6
18.7
19.6
21.9
10.5
12.5
14.5
17.5
20.5
KT0331
KT0332
KT0333
KT0334
KT0335
4
6
8
10
12
H
F
H
L
Order Instructions
Tube
Type
Order No. ØOD
Æ
ÆE
Dimensions in mm
79
Reducing Parallel Y Connector
Order Instructions
Tube
Type
Order No. ØOD-A
Tube
ØOD-B
L
H
F-C
F-D
ØE
ØF
Ø
YVS-64KU
YVS-86KU
YVS-108KU
YVS-1210KU
Material: plastic
4
6
8
10
37.9
41.3
43.3
46.5
21
25
29
35
17.6
18.7
19.6
21.9
16.3
17.6
18.7
19.6
12.5
14.5
17.5
20.5
10.5
12.5
14.5
17.5
3.3
4.3
4.3
4.3
KT0336
KT0337
KT0338
KT0339
6
8
10
12
H
ÆB
L
F-C
ÆE
F-D
Æ
ÆA
ÆF
Parallel Y Stem Connector
Stem
Ø
J
H
L
F
YVSN-44KU
YVSN-66KU
YVSN-88KU
YVSN-1010KU
YVSN-1212KU
4
6
8
10
12
22
24
26
28
30
21
25
29
35
41
49.5
54.7
59.8
66.1
71.6
16.8
17.6
18.7
19.6
21.9
KT0340
KT0341
KT0342
KT0343
KT0344
4
6
8
10
12
Material: plastic
J
L
F
H
Order Instructions
Tube
Type
Order No. ØOD
Æ
Reducing Straight Stem Connector
C
D
F
ÆB
ÆA
80
Order Instructions
A
Type
Order No.
B
C
D
F
R-64KU
R-84KU
R-86KU
R-106KU
R-108KU
R-128KU
R-1210KU
Material: plastic
4
4
6
6
8
8
10
21.7
22.7
23.7
28.7
27.7
30.7
31.2
41.0
42.0
44.3
47.3
49.7
52.5
56.5
12.8
12.8
13.4
13.4
14.2
14.2
14.9
KT0345
KT0346
KT0347
KT0348
KT0349
KT0350
KT0351
6
8
8
10
10
12
12
Blanking Plug, black
Order Instructions
A
Type
Order No.
B
C
D
VST-4KU
VST-6KU
VST-8KU
VST-10KU
VST-12KU
Material: plastic
4
6
8
10
12
17.7
19.4
21.2
23.8
29.5
30
34
38
42
46
KT0352
KT0353
KT0354
KT0355
KT0356
4
6
8
10
12
C
D
ÆB
ÆA
Port
Size
L
H
A
F
SW
ESS-54KU
ESS-184KU
ESS-56KU
ESS-186KU
ESS-146KU
ESS-188KU
ESS-148KU
ESS-388KU
ESS-3810KU
ESS-1210KU
ESS-3812KU
ESS-1212KU
Material: plastic,
M5
G1/8
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G3/8
G1/2
G3/8
G1/2
22.1
23.5
22.1
23.5
28.0
23.5
28.0
32.5
32.5
34.0
32.5
34.0
26.6
32.4
27.2
33.5
37.3
34.2
38.3
41.8
42.5
48.6
44.8
50.3
4.6
4.5
4.6
4.5
6.0
4.5
6.0
6.0
6.0
7.5
6.0
7.5
16.8
16.3
17.6
17.6
17.6
18.7
18.7
18.7
19.6
19.6
21.9
21.9
8
8
8
8
12
8
12
14
14
19
14
19
H
SW
F
A
KT0357
4
KT0358
4
KT0359
6
KT0360
6
KT0361
6
KT0362
8
KT0363
8
KT0364
8
KT0365
10
KT0366
10
KT0367
12
KT0368
12
nickel plated brass
L
Order Instructions
Tube
Type
Order No. ØOD
Triple Tee Connector
L
F-D
H
ÆA
F-C
Æ
ÆB
Order Instructions
Tube
Type
Order No. ØOD-A
Tube
ØOD-B
Ø
H
L
F-C
F-D
VVS-64KU
VVS-84KU
VVS-86KU
VVS-106KU
VVS-108KU
4
4
6
6
8
3.3
4.3
4.3
4.3
4.3
24.2
28.5
34.0
32.0
34.5
63.7
65.7
71.7
78.1
83.4
17.6
18.7
18.7
19.6
19.6
16.3
16.3
17.6
17.6
18.7
Material: plastic
KT0369
KT0370
KT0371
KT0372
KT0373
6
8
8
10
10
Dimensions in mm
81
Triple Run Tee Adaptor, swivelling, male parallel thread with O-ring
L
A
F-D
H
ÆA
F-C
SW
Æ
ÆB
Order Instructions
Tube
Tube Port
Type
Order No. ØOD-A ØOD-B Size
Ø
H
L
F-C F-D A
SW
VDS-18-64KU
VDS-14-84KU
VDS-14-86KU
VDS-38-108KU
Material: plastic,
3.3
4.3
4.3
4.3
24.2
28.5
34.0
34.5
71.1
74.9
80.0
92.3
17.6
18.7
18.7
19.6
14
17
17
20
KT0374
6
KT0375
8
KT0376
8
KT0377
10
nickel-plated brass
4
4
6
8
G1/8
G1/4
G1/4
G3/8
16.3
16.3
17.6
18.7
End Cap
Order Instructions
Tube
Type
Order No. ØOD
C
L
F
VK-4KU
VK-6KU
VK-8KU
VK-10KU
VK-12KU
VK-16KU
10.5
12.5
14.5
17.5
19.5
25.5
18.0
19.0
21.0
23.0
25.0
27.5
16.8
17.6
18.7
19.6
21.9
24.0
L
F
Material: plastic
ÆC
82
KT0472
KT0473
KT0474
KT0475
KT0476
KT0477
4
6
8
10
12
16
6
8
8
8
Miniature Plastic Push-in Fittings
Port Size
C
D
F
SW
GSM-33Msv
KT0378
GSM-53Msv
KT0379
GSM-63Msv
KT0380
GSM-34Msv
KT0381
GSM-54Msv
KT0382
GSM-64Msv
KT0383
GSM-184Msv KT0384
GSM-56Msv
KT0385
GSM-66Msv
KT0386
GSM-186Msv KT0387
M3
M5
M6
M3
M5
M6
G1/8
M5
M6
G1/8
4.0
4.6
5.1
4.0
4.6
5.1
6.0
4.6
5.1
6.0
17.1
17.7
18.2
17.7
18.2
18.8
18.0
19.4
19.9
18.6
11.1
11.1
11.1
11.6
11.6
11.6
11.6
12.8
12.8
12.8
7
8
8
8
8
8
12
10
10
12
D
3
3
3
4
4
4
4
6
6
6
F
Order Instructions
Tube
Type
Order No. ØOD
C
SW
Port Size C
D
E
L
F
SW
LDSM-33KU
LDSM-53KU
LDSM-63KU
LDSM-34KU
LDSM-54KU
LDSM-64KU
LDSM-184KU
LDSM-56KU
LDSM-66KU
LDSM-186KU
Material: plastic,
M3
M5
M6
M3
M5
M6
G1/8
M5
M6
G1/8
13.0
13.0
13.0
13.0
13.0
13.0
12.2
13.0
13.0
12.2
19.8
20.4
20.9
20.3
20.9
21.4
21.2
21.9
22.4
22.6
17.2
17.2
17.2
18.2
18.2
18.2
21.5
19.4
19.4
23.2
11.1
11.1
11.1
11.6
11.6
11.6
11.6
12.8
12.8
12.8
8
8
8
8
8
8
14
8
8
14
3
3.6
4.1
3
3.6
4.1
6
3.6
4.1
6
L
F
E
KT0388
3
KT0389
3
KT0390
3
KT0391
4
KT0392
4
KT0393
4
KT0394
4
KT0395
6
KT0396
6
KT0397
6
nickel-plated brass
D
Order Instructions
Tube
Type
Order No. ØOD
C
SW
E
L
F
SW
TDSM-33KU
TDSM-53KU
TDSM-63KU
TDSM-34KU
TDSM-54KU
TDSM-64KU
TDSM-184KU
TDSM-56KU
TDSM-66KU
TDSM-186KU
Material: plastic,
M3
M5
M6
M3
M5
M6
G1/8
M5
M6
G1/8
13.0
13.0
13.0
13.0
13.0
13.0
12.2
13.0
13.0
12.2
19.8
20.4
20.9
20.3
20.9
21.4
21.4
21.9
22.4
22.2
26.6
26.6
26.6
28.6
28.6
28.6
28.6
31.0
31.0
31.0
11.1
11.1
11.1
11.6
11.6
11.6
11.6
12.8
12.8
12.8
8
8
8
8
8
8
14
8
8
14
KT0398
3
KT0399
3
KT0400
3
KT0401
4
KT0402
4
KT0403
4
KT0404
4
KT0405
6
KT0406
6
KT0407
6
nickel-plated brass
3.0
3.6
4.1
3.0
3.6
4.1
6.0
3.6
4.1
6.0
L
F
D
D
E
Port Size C
SW
C
Order Instructions
Tube
Type
Order No. ØOD
Dimensions in mm
83
Miniature Plastic Push-in Fittings
Straight Connector
Order Instructions
Tube
Type
Order No. ØOD
B
F
H
GVSM-3KU
KT0408
GVSM-4KU
KT0409
GVSM-6KU
KT0410
Material: plastic
7.6
8.5
10.7
11.1
11.6
12.8
23.2
26.1
26.6
3
4
6
H
ÆB
F
Order Instructions
Tube
Type
Order No. ØOD
B
C
D
F
H
WVSM-3KU
WVSM-4KU
WVSM-6KU
5.4
5.8
6.9
5.4
5.8
6.9
3.2
3.2
3.2
11.1
11.6
12.8
17.1
18.5
21.8
KT0411
KT0412
KT0413
3
4
6
Material: plastic
H
B
F
ÆD
C
Equal Tee Connector
Order Instructions
Tube
Type
Order No. ØOD
D
C
B
E
L
F
H
TVSM-3KU
TVSM-4KU
TVSM-6KU
3,2
3,2
3,2
10,7
11,6
13,8
3,4
5,8
6,9
13,3
14,3
16,5
17,1
18,5
21,8
11,1
11,6
12,8
26,6
28,6
33,0
Material: plastic
H
E
L
B
F
ÆD
C
84
KT0414
KT0415
KT0416
3
4
6
Compression Fittings
Proven Connection System with
Guide Cone and Compression Nut
protection
■ Tube clamped on its outside diameter by
compression nut
■ Tube sealed on its inner diameter by cone
■ Thread sealed by integrated O-ring
(no seal rings required)
Technical Data
Connecting thread*
Tubing outside/inside diameter *
4/2, 5/3, 6/4, 8/6, 10/8, 12/10, 15/12,5
Material**
Body/nut: nickel-plated brass; O-rings: NBR
0 to 18 bar (suitable for low vacuum)
Temperature range
Medium
* depending on type
** exceptions on some types are specified
Tubing type
Compressed air tubing
Tubing tolerances
Usual tolerances
Tubing material
PE, PA, PU, PVC (glassfibre-reinforced) depending on application
1)
see our range of tubing in Section on Tubing and Hoses, pages 109–111
Dimensions in mm
85
SW1
SW
I
∅DA / DI
G
L
∅DA / DI
G
I
Tube
ØDA/DI *
G
SW
SW1
I
L
G-54Msv
G-55Msv
G-185Msv
G-56Msv
G-186Msv
G-146Msv
G-188Msv
G-148Msv
G-388Msv
G-1410Msv
G-3810Msv
G-1210Msv
G-3812Msv
G-1212Msv
G-1215Msv
4/2
5/3
5/3
6/4
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
15/12.5
M5
M5
G1/8
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G3/8
G1/2
G1/2
8
8
14
9
15
18
15
18
21
18
21
26
21
26
26
9
8
8
9
12
12
14
14
14
16
16
16
19
19
22
4
4
6
4
6
8
6
8
9
8
9
11
9.0
11
11
22
22
23
22
25
27
25
27
29
29
31
33
33
35
35.5
KW 0178
KW 0181
KW 0182
KW 0183
KW 0184
KW 0185
KW 0186
KW 0187
KW 0188
KW 0189
KW 0190
KW 0191
KW 0192
KW 0193
KW 0194
1.5
2
2
2.5
3
3
5
5
5
6.8
6.8
6.8
8.5
8.5
11
Straight Adaptor for metal-braided tubing, male parallel thread with O-ring
SW
L1
Order Instructions
Nominal
Type
Order No. width
L
Order Instructions
Nominal
Type
Order No. width
Tube
ØDA/DI *
G
SW
I
L1
L2
G-146M
G-149M
G-386M
G-389M
G-126M
G-129M
9/6
12/9
9/6
12/9
9/6
12/9
G1/4
G1/4
G3/8
G3/8
G1/2
G1/2
17
22
19
22
24
24
9
9
9
9
11
11
35
38
35
38
37.5
40
20.5
23
20.5
23
20.5
23
KX 5517
KX 5518
KX 5519
KX 5520
KX 5521
KX 5522
5.2
7.5
5.2
7.5
5.2
7.5
Material: aluminum, black-anodized
Straight Adaptor, male taper thread
SW1
I
SW
∅DA/DI
G
L
Order Instructions
NW
Type
Order No.
Tube
ØDA/DI *
G
SW
SW1
I
L
GK-185Msv
GK-186Msv
GK-146Msv
GK-188Msv
GK-148Msv
GK-388Msv
GK-1810Msv
GK-1410Msv
GK-3810Msv
GK-1210Msv
GK-3812Msv
GK-1212Msv
GK-1215Msv
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
10/8
12/10
12/10
15/12.5
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/2
R3/8
R1/2
R1/2
12
12
14
12
14
17
14
14
17
22
17
22
22
8
12
12
14
14
14
16
16
16
16
19
19
22
8
8
11
8
11
11.5
8
11
11.5
14
11.5
14
14
24.5
26.5
30
26
30
31
28.5
32
33
36
35
38
39.5
KW 0166
KW 0167
KW 0168
KW 0169
KW 0170
KW 0171
KW 0838
KW 0172
KW 0173
KW 0174
KW 0175
KW 0176
KW 0177
* = Tube ØOD/ID
86
2.0
3.0
3.0
5.0
5.0
5.0
6.8
6.8
6.8
6.8
8.5
8.5
10.5
Pressure Gauge Adaptor
Order Instructions
Nominal
Type
Order No. width
Tube
ØDA/DI *
G
SW
SW1
I
L
MV-186Msv
MV-146Msv
MV-188Msv
MV-148Msv
MV-388Msv
MV-1410Msv
MV-3810Msv
MV-1210Msv
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
14
17
14
17
20
17
20
24
12
12
14
14
14
16
16
16
7
8
7
8
10.3
8
10.3
11.4
26
28
26
28
32
30
34
37.5
3
3
5
5
5
6.8
6.8
6.8
SW
L
SW1
I
∅DA / DI
G
KW 0195
KW 0196
KW 0197
KW 0198
KW 0199
KW 0200
KW 0201
KW 0202
Order Instructions
Type
Order No.
NW
Tube
G
ØDA/DI*
SW
SW1 SW2 I
L
L1
LD-186Msv
LD-146Msv
LD-188Msv
LD-148Msv
LD-1410Msv
3
3
6
6
6.8
6/4
6/4
8/6
8/6
10/8
10
10
10
12
12
12
12
14
14
16
21
22.5
21
24
24
20.5
21.6
21
22
24
KW 0964
KW 0965
KW 0966
KW 0967
KW 0968
G1/8
G1/4
G1/8
G1/4
G1/4
13
16
13
16
16
6
8
6
8
8
For frequent swivelling, see Type ES-..
L
SW2
I
L1
G
SW
SW1
∅DA / DI
* = Tube ØOD/ID
I
L
L1
L2
2
5
2
5
6
5
6
6
6
6
10
6
10
10
9
8
9
12
12
14
14
14
16
16
16
19
19
22
4
6
4
6
8
6
8
9
8
9
11
9
11
11
20
17
20.5
24
26.5
24
26
28
28
29
30.5
31.5
33
35
16.8
27
16.8
27
31.5
27
31.5
36
31.5
36
32
36
42
42
6.5
10.5
6.5
10.5
11.5
10.5
11.5
13.5
11.5
13.5
15.5
13.5
15.5
15.5
9.9
15
9.9
15
18
15
18
21
18
21
26
21
26
26
L
SW
SW1
G
∅DA / DI
M5
G1/8
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G3/8
G1/2
G1/2
SW1 ØD
L2
KW 0323 1.5 4/2
KW 0325 2
5/3
KW 0326 3
6/4
KW 0327 3
6/4
KW 0328 3
6/4
KW 0329 5
8/6
KW 0330 5
8/6
KW 0331 5
8/6
KW 0332 6.8 10/8
KW 0333 6.8 10/8
KW 0334 6.8 10/8
KW 0335 8.5 12/10
KW 0336 8.5 12/10
KW 0829 11
15/12.5
frequent swivelling
SW
I
ES-54Msv
ES-185Msv
ES-56Msv
ES-186Msv
ES-146Msv
ES-188Msv
ES-148Msv
ES-388Msv
ES-1410Msv
ES-3810Msv
ES-1210Msv
ES-3812Msv
ES-1212Msv
ES-1215Msv
Application: for
Tube
G
ØDA/DI*
L1
Order Instructions
NW
Type
Order No.
∅D
Dimensions in mm
87
Banjo Elbow Adaptor for metal-braided tubing, male parallel thread with O-ring
Order Instructions
NW Tube
G
Type
Order No.
ØDA/DI *
B
I
L1
L2
L3
ES-146M KX 5540
5.2 9/6
ES-149M KX 5541
6.5 12/9
ES-389M KX 5542
7
12/9
Material: aluminum, black-anodized
20
20
24
6.5
6.5
6.5
37
40
41
14.5
16
16
30
39.5 17
32.5 42
17
35
47
22
G1/4
G1/4
G3/8
L4
SW
L1
B
i
L3
L4
G
SW
L2
¿DA / DI
Elbow Adaptor, male taper thread
L
I
L1
G
SW
SW1
∅DA / DI
SW
L1
G
SW1
Tube
G
ØDA/DI *
SW
SW1
I
L
L1
WE-185Msv
WE-186Msv
WE-146Msv
WE-188Msv
WE-148Msv
WE-388Msv
WE-1810Msv
WE-1410Msv
WE-3810Msv
WE-1210Msv
WE-3812Msv
WE-1212Msv
WE-1215Msv
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
10/8
12/10
12/10
15/12.5
8
9
9
12
12
12
11
12
12
17
17
17
17
8
12
12
14
14
14
16
16
16
16
19
19
22
8
8
11
8
11
11.5
8
11
11.5
14
11.5
14
14
17
17
20
17
20
22
20.5
22
22
26
24.5
26
28
21.5
22
22
22
22
22.5
25.5
24.5
24.5
27.5
31
31
34
KW 0215
KW 0216
KW 0217
KW 0218
KW 0219
KW 0220
KW 0874
KW 0221
KW 0222
KW 0223
KW 0224
KW 0225
KW 0226
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/8
R1/4
R3/8
R1/2
R3/8
R1/2
R1/2
∅DA / DI
Order Instructions
NW
Type
Order No.
Tube
G
ØDA/DI *
SW
SW1 I
L
L1
WI-185Msv
WI-186Msv
WI-146Msv
WI-188Msv
WI-148Msv
WI-1410Msv
5/3
6/4
6/4
8/6
8/6
10/8
8
9
11
10
12
11
8
12
12
14
14
16
21.5
20
23
21
22.5
23
22
22
25.5
22.5
22
25.5
* = Tube ØOD/ID
88
2
3
3
5
5
5
6.8
6.8
6.8
6.8
8.5
8.5
11
Elbow Adaptor, female parallel thread
L
I
Order Instructions
NW
Type
Order No.
KW 0963
KW 0227
KW 0228
KW 0229
KW 0230
KW 0231
2
3
3
5
5
6.8
G1/8
G1/8
G1/4
G1/8
G1/4
G1/4
7
7
8
7
8
8
Banjo Elbow Body, for banjo bolt*
SW
ØD
L
L1
RE-54Msv
RE-55Msv
RE-185Msv
RE-56Msv
RE-186Msv
RE-146Msv
RE-188Msv
RE-148Msv
RE-388Msv
RE-1410Msv
RE-3810Msv
RE-1210Msv
RE-3812Msv
RE-1212Msv
RE-1215Msv
4/2
5/3
5/3
6/4
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
15/12.5
9
8
8
9
12
12
14
14
14
16
16
16
19
19
22
9.5
9.5
14
9.5
14
18
14
18
21
18
21
26
21
26
26
9
9
15
9
15
17
15
17
20
17
20
24
20
24
24
19
20.5
24
20.5
24
26
24
26
28
28
28
30.5
31.5
33
35
KW 0270
KW 0274
KW 0275
KW 0276
KW 0277
KW 0278
KW 0279
KW 0280
KW 0281
KW 0282
KW 0283
KW 0284
KW 0285
KW 0286
KW 0287
1.5
2
2
3
3
3
5
5
5
6.8
6.8
6.8
8.5
8.5
11
M5
M5
G1/8
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G3/8
G1/2
G1/2
SW
∅D
∅DA / DI
Tube
ØB for
ØDA/DI ** banjo bolt
L
Order Instructions
NW
Type
Order No.
∅B
L1
* for banjo bolts see pages 92-94
NW
REI-1818Msv
REI-1414Msv
REI-3838Msv
3
5
8.5
KW 0346
KW 0347
KW 0348
ØB for
banjo bolt
G
ØD
G1/8
G1/4
G3/8
G1/8
G1/4
G3/8
14
18
21
ØD1
I
13.3
16.7
20.2
7
8
10.3
15
17
20
∅D1
Order Instructions
Type
Order No.
L
Banjo Elbow Body, female parallel thread, for banjo bolt*
G
I
L
∅B
∅D
* for banjo bolts see pages 92-94
Run Tee Adaptor, male taper thread
SW1
I
L
L1
LE-185Msv
LE-186Msv
LE-146Msv
LE-188Msv
LE-148Msv
LE-388Msv
LE-1410Msv
LE-3810Msv
LE-1210Msv
LE-3812Msv
LE-1212Msv
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
12
12
12
12
12
12
12
12
17
17
17
8
9
9
14
14
14
16
16
16
19
19
8
8
11
8
11
11.5
11
11.5
14
11.5
14
38.5
39
42
39
42
44.5
46.5
46.5
53.5
55
57
21.5
22
22
22
22
22.5
24.5
24.5
27.5
31
31
KW 0250
KW 0251
KW 0252
KW 0253
KW 0254
KW 0255
KW 0256
KW 0257
KW 0258
KW 0259
KW 0260
** = Tube ØOD/ID
2
3
3
5
5
5
6.8
6.8
6.8
8.5
8.5
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
SW1
SW
L1
SW
I
L
∅DA / DI
Tube
F
ØDA/DI**
G
Order Instructions
NW
Type
Order No.
Dimensions in mm
89
Banjo Tee Adaptor, male parallel thread with O-ring
SW
SW1
I
G
∅DA / DI
L1
L
L2
L
Order Instructions
NW Tube
G
Type
Order No.
ØDA/DI**
SW
SW1 ØD
I
L
L1
L2
TS-186Msv KW 0337 2
6/4
TS-146Msv KW 0338 3
6/4
TS-188Msv KW 0339 3
8/6
TS-148Msv KW 0340 5
8/6
TS-388Msv KW 0341 5
8/6
TS-1410Msv KW 0342 5
10/8
TS-3810Msv KW 0343 6.8 10/8
TS-1210Msv KW 0344 6.8 10/8
TS-3812Msv KW 0345 6.8 12/10
TS-1212Msv KW 0830 8.5 12/10
Application: for frequent swivelling
5
6
5
6
6
6
6
10
6
10
12
12
14
14
14
16
16
16
19
19
15
18
15
18
21
18
21
26
21
26
6
8
6
8
9
8
9
11
9
11
24
26
24
26
28
27.5
29
30.5
31.5
33
27
31.5
27
31.5
36
31.5
36
42
36
42
10.5
11.5
10.5
11.5
13.5
11.5
13.5
15.5
13.5
19.5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G3/8
G1/2
∅D
Branch Tee Adaptor, male taper thread
L
I
SW
G
∅DA / DI
L1
SW1
Order Instructions
NW
Type
Order No.
Tube
G
ØDA/DI **
SW
SW1
I
L
L1
TE-185Msv
TE-186Msv
TE-146Msv
TE-188Msv
TE-148Msv
TE-388Msv
TE-1410Msv
TE-3810Msv
TE-1210Msv
TE-3812Msv
TE-1212Msv
TE-1215Msv
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
15/12.5
8
12
12
12
12
12
12
12
17
17
17
17
8
9
9
14
14
14
16
16
16
19
19
22
8
8
11
8
11
11.5
11
11.5
14
11.5
14
14
17
17
20
17
20
22
22
22
26
24
26
28
21.5
22
22
22
22
22.5
24.5
24.5
27.5
31
31
34
KW 0238
KW 0239
KW 0240
KW 0241
KW 0242
KW 0243
KW 0244
KW 0245
KW 0246
KW 0247
KW 0248
KW 0249
2
3
3
5
5
5
6.8
6.8
6.8
8.5
8.5
11
R1/8
R1/8
R1/4
R1/8
R1/4
R3/8
R1/4
R3/8
R1/2
R3/8
R1/2
R1/2
Banjo Tee Body, for banjo bolt*
L1
∅B
∅D
90
∅DA / DI
L
SW
Order Instructions
Type
Order No.
NW
Tube
ØB for
ØDA/DI** banjo bolt
SW
ØD
L
L1
RD-185Msv
RD-186Msv
RD-146Msv
RD-188Msv
RD-148Msv
RD-388Msv
RD-1410Msv
RD-3810Msv
RD-1210Msv
RD-1212Msv
2
3
3
5
5
5
6.8
6.8
6.8
8.5
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
8
12
12
14
14
14
16
16
16
19
14
14
18
14
18
21
18
21
26
26
15
15
17
15
17
20
17
20
24
24
24
24
26
24
26
28
28
28
30.5
33
KW 0288
KW 0289
KW 0290
KW 0291
KW 0292
KW 0293
KW 0294
KW 0295
KW 0296
KW 0297
* for banjo bolts see pages 92–94
** = Tube ØOD/ID
G1/8
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G1/2
Straight Connector
Order Instructions
Type
Order No.
NW
Tube
ØDA/DI *
SW
SW1
L
GV-5Msv
GV-6Msv
GV-8Msv
GV-10Msv
GV-12Msv
GV-15Msv
2
3
5
6.8
8.5
11
5/3
6/4
8/6
10/8
12/10
15/12.5
8
12
12
14
17
22
8
12
14
16
19
22
28.5
33
33
37
42
45
KW 0203
KW 0204
KW 0205
KW 0206
KW 0207
KW 0208
SW1
L
∅DA / DI
SW
NW
Tube
SW
ØDA/DI*
SW1
L
B
SV-53Msv
SV-64Msv
SV-86Msv
SV-108Msv
SV-1210Msv
SV-1512Msv
2
3
5
6.8
8.5
11
5/3
6/4
8/6
10/8
12/10
15/12.5
8
12
14
16
19
22
40
47
48
49
53
53
9
11
13
10.5
10
10
KW 0209
KW 0210
KW 0211
KW 0212
KW 0213
KW 0214
8
14
16
17
19
24
SW
B
L
SW1
∅DA / DI
Order Instructions
Type
Order No.
Order Instructions
Type
Order No.
NW
Tube
ØDA/DI *
SW
SW1
L
W-5Msv
W-6Msv
W-8Msv
W-10Msv
W-12Msv
W-15Msv
2
3
5
6.8
8.5
11
5/3
6/4
8/6
10/8
12/10
15/12.5
8
9
12
12
17
17
8
12
14
16
19
22
21
22
22
24.5
31
34
KW 0232
KW 0233
KW 0234
KW 0235
KW 0236
KW 0237
L
* = Tube ØOD/ID
SW
SW1
∅DA / DI
Dimensions in mm
91
Compression Fittings, Banjo Bolts
Equal Tee Connector
Order Instructions
Type
Order No.
NW
Tube
SW
ØDA/DI **
SW1
L
TV-5Msv
TV-6Msv
TV-8Msv
TV-10Msv
TV-12Msv
TV-15Msv
2
3
5
6.8
8.5
11
5/3
6/4
8/6
10/8
12/10
15/12.5
8
12
14
16
19
22
21
22
22
24.5
31
34
Order Instructions
Type
Order No.
NW
Tube
SW
ØDA/DI **
SW1
L
KV-6Msv
KV-8Msv
KV-10Msv
3
5
6.8
6/4
8/6
10/8
12
14
16
21
22.5
26.5
KW 0261
KW 0262
KW 0263
KW 0264
KW 0265
KW 0266
8
9
12
12
17
17
L
∅DA / DI
SW
SW1
KW 0267
KW 0268
KW 0269
9
12
12
SW1
∅DA / DI
L
SW
Single Banjo Bolt, male parallel thread, for banjo bodies*
Order Instructions
Type
Order No.
NW
G
SW
I
L
H-15Msv
H-118Msv
H-114Msv
H-138Msv
H-112Msv
2
3
5
6.8
8.5
M5
G1/8
G1/4
G3/8
G1/2
8
14
17
20
27
6
9
11
12
13
18
28
33
37
42
KW 0298
KW 0299
KW 0300
KW 0301
KW 0302
* for banjo elbow and tee bodies see pages 65, 66, 89, 90
** = Tube ØOD/ID
L
G
SW
I
92
Double Banjo Bolt , male parallel thread, for banjo bodies*
Order Instructions
Type
Order No.
NW
G
SW
I
L
H-218Msv
H-214Msv
H-238Msv
H-212Msv
3
5
6.8
8.5
G1/8
G1/4
G3/8
G1/2
14
17
20
27
9
11
12
13
44.5
51.5
58.5
67.5
KW 0307
KW 0308
KW 0309
KW 0310
L
G
SW
I
Triple Banjo Bolt, male parallel thread, for banjo bodies*
Order Instructions
Type
Order No.
NW
G
SW
I
L
H-318Msv
H-314Msv
3
5
G1/8
G1/4
14
17
9
11
61
70
KW 0972
KW 0973
L
G
SW
I
Single Hollow Bolt with Internal Thread – for L-Banjo’s*
Order Instructions
Type
Order No.
NW
G
G1
SW
I
I1
L
HI-118Msv
HI-114Msv
HI-138Msv
HI-112Msv
3
5
6.8
8.5
G1/8
G1/4
G3/8
G1/2
G1/8
G1/4
G3/8
G1/2
14
17
20
27
9
11
12
13
7
8
10.3
11.4
36.5
42
49.5
55
KW 0303
KW 0304
KW 0305
KW 0306
L
G
G1
SW
I
I1
Dimensions in mm
93
Compression Fittings, Banjo Bolts
Double Banjo Bolt, female parallel thread, for banjo bodies*
Order Instructions
Type
Order No.
NW
G
G1
SW
I
I1
L
HI-218Msv
HI-214Msv
HI-238Msv
HI-212Msv
3
5
6.8
8.5
G1/8
G1/4
G3/8
G1/2
G1/8
G1/4
G3/8
G1/2
14
17
20
27
9
11
12
13
7
8
10.3
11.4
53
60.5
71
80.5
KW 0311
KW 0312
KW 0313
KW 0314
SW
G
G1
L
I1
I
Compression Nut for Compression Fittings
L
D
SW
94
Order Instructions
Type
Order No.
For Compression
Fittings with Port Size
Tube
ØOD/ID
L
SW1
UM-4Msv
UM-5Msv
UM-6/1Msv
UM-6/2Msv
UM-8Msv
UM-10Msv
UM-12Msv
UM-15Msv
M5
M5. G1/8
M5
G1/8. G1/4
G1/8. G1/4. G3/8
G1/4. G3/8. G1/2
G3/8. G1/2
G1/2
4/2
5/3
6/4
6/4
8/6
10/8
12/10
15/12.5
9
8
9
11
11
12
12
13
9
8
9
12
14
16
19
22
KW 0710
KW 0711
KW 0712
KW 0713
KW 0714
KW 0715
KW 0716
KW 0717
Standard Fittings
Fittings for General Installation Work
(rigid connections, junctions,
couplings, etc.)
protection
Technical Data
Connecting thread*
Tubing outside/inside diameter*
4/2, 5/3, 6/4, 8/6, 10/8, 12/10, 15/12,5
Material**
Nickel-plated brass; O-rings: NBR
0 to 18 bar (suitable for low vacuum)
Temperature range
Medium
* depending on type
** exceptions on some types are specified
Dimensions in mm
95
Standard Fittings
Double Nipple Connector, male parallel thread
I1
SW
G
G1
SW
I
I1
L
DZ-5050Msv
DZ-1818Msv
DZ-1414Msv
DZ-3838Msv
DZ-1212Msv
DZ-3434Msv
DZ-1010Msv
M5
G1/8
G1/4
G3/8
G1/2
G3/4
G1
M5
G1/8
G1/4
G3/8
G1/2
G3/4
G1
8
14
17
20
25
30
36
4
6
8
9
10
11
12
4
6
8
9
10
11
12
11.5
17
21
24
26.5
28
31
KW 0895
KW 0373
KW 0374
KW 0375
KW 0376
KW 0377
KW 0896
G
G1
I
Order Instructions
Type
Order No.
L
Reducing Nipple Adaptor, male parallel thread
I1
G
G1
SW
I
I1
L
DZ-1805Msv
DZ-1814Msv
DZ-1838Msv
DZ-1438Msv
DZ-1412Msv
DZ-3812Msv
DZ-1234Msv
DZ-3410Msv
M5
G1/8
G1/8
G1/4
G1/4
G3/8
G1/2
G3/4
G1/8
G1/4
G3/8
G3/8
G1/2
G1/2
G3/4
G1
8
17
20
20
25
25
30
36
4
6
6
8
8
9
10
11
4
8
9
9
10
10
11
12
11.5
19
20
22
24
25.5
27
30
KW 0897
KW 0378
KW 0379
KW 0380
KW 0381
KW 0382
KW 0383
KW 0898
G
G1
I
Order Instructions
Type
Order No.
L
SW
Double Nipple Connector, male taper thread (3 separable parts)
SW
G
G
SW1
I1
I
L
96
Order Instructions
Type
Order No.
G
SW
SW
I
I1
L
DT-1818
KY 6364
DT-1414
KY 6365
DT-3838
KY 6366
DT-1212
KY 6367
DT-3434
KY 6368
DT-1010
KY 6369
Material: brass uncoated
R1/8
R1/4
R3/8
R1/2
R3/4
R1
15
19
22
27
36
46
5
6
8
12
14
19
9
12
13
16
18
18
9
12
13
16
18
22
27
34
36
44
52
65
Double Nipple Connector, male taper thread
Order Instructions
Type
Order No.
G
G1
SW
I
I1
L
DK-1818Msv
DK-1414Msv
DK-3838Msv
DK-1212Msv
DK-3434Msv
DK-1010Msv
R1/8
R1/4
R3/8
R1/2
R3/4
R1
R1/8
R1/4
R3/8
R1/2
R3/4
R1
12
14
17
22
27
34
8
11
11.5
14
16.5
16.5
8
11
11
14
16.5
16.5
21
27
29
35
40
41
KW 0368
KW 0369
KW 0370
KW 0371
KW 0372
KW 0894
I
G
G1
SW
I1
L
Reducing Nipple Adaptor, male taper thread
G
G1
SW
I
I1
L
DK-1814Msv
DK-1838Msv
DK-1438Msv
DK-1412Msv
DK-3812Msv
DK-1234Msv
DK-1034Msv
R1/8
R1/8
R1/4
R1/4
R3/8
R1/2
R3/4
R1/4
R3/8
R3/8
R1/2
R1/2
R3/4
R1
14
17
17
22
22
27
34
8
8
11
11
11.5
14
14
11
11.5
11.5
14
14
17
17
24
25
28
32
32.5
37.5
37.5
I1
I
G
KW 0362
KW 0363
KW 0364
KW 0365
KW 0366
KW 0367
KW 0893
G1
Order Instructions
Type
Order No.
L
SW
Reducing Nipple Adaptor, male / female parallel thread
G1
SW
I
L
RNZ-185Msv
RNZ-1418Msv
RNZ-3818Msv
RNZ-3814Msv
RNZ-1214Msv
RNZ-1238Msv
RNZ-3412Msv
RNZ-1034Msv
G1/8
G1/4
G3/8
G3/8
G1/2
G1/2
G3/4
G1
M5
G1/8
G1/8
G1/4
G1/4
G3/8
G1/2
G3/4
14
17
20
20
25
25
30
36
6
8
9
9
10
10
11
12
10
13
14
14
15.5
15.5
17
19
KW 0899
KW 0411
KW 0412
KW 0413
KW 0414
KW 0415
KW 0753
KW 0900
L
I
G1
G
G
Order Instructions
Type
Order No.
SW
Dimensions in mm
97
Standard Fittings
Reducing Sleeve Adaptor, male / female parallel thread
SW
G
G1
SW
I
I1
L
RMZ-1805Msv
RMZ-1818Msv
RMZ-1814Msv
RMZ-1414Msv
RMZ-1438Msv
RMZ-3838Msv
RMZ-3812Msv
RMZ-1212Msv
M5
G1/8
G1/8
G1/4
G1/4
G3/8
G3/8
G1/2
G1/8
G1/8
G1/4
G1/4
G3/8
G3/8
G1/2
G1/2
12
14
17
17
22
22
24
25
4
6
8
8
9
9
11
11
7
7
8
8
10.3
10.3
11.4
11.4
16
18
20
21.5
24
25
28
28
KW 0391
KW 0392
KW 0393
KW 0394
KW 0395
KW 0396
KW 0397
KW 0398
G
G1
I
Order Instructions
Type
Order No.
I1
L
Extended Sleeve Adaptor, male / female parallel thread
I
Order Instructions
Type
Order No.
G
SW
I
I1
L
RMZL1-18Msv
RMZL2-18Msv
RMZL1-14Msv
RMZL2-14Msv
RMZL3-18Msv
RMZL3-14Msv
G1/8
G1/8
G1/4
G1/4
G1/8
G1/4
14
14
17
17
14
17
6
6
8
8
6
8
8
8
9
9
8
9
22
42
35
51
100
100
KW 0399
KW 0400
KW 0401
KW 0402
KW 0403
KW 0404
G
G
SW
I1
L
Sleeve Connector, female parallel thread
G
SW
L
98
Order Instructions
Type
Order No.
G
SW
L
MU-50Msv
MU-18Msv
MU-14Msv
MU-38Msv
MU-12Msv
M5
G1/8
G1/4
G3/8
G1/2
8
14
17
22
27
11
15.0
22.0
24.0
30.0
KW 0984
KW 0416
KW 0417
KW 0418
KW 0419
Reducing Sleeve Adaptor, female parallel thread
Order Instructions
Type
Order No.
G
G1
SW
I
I1
L
RMZJ-1814Msv
RMZJ-1838Msv
RMZJ-1438Msv
RMZJ-1412Msv
RMZJ-3812Msv
G1/4
G3/8
G3/8
G1/2
G1/2
G1/8
G1/8
G1/4
G1/4
G3/8
17
22
22
24
24
8
10.3
10.3
11.4
11.4
8
7
9
9
11
20
22
24
27
28
KW 0420
KW 0421
KW 0422
KW 0423
KW 0424
SW
G
G1
I1
I
L
Equal Elbow Connector, male taper thread
Order Instructions
Type
Order No.
WEA-18Msv
WEA-14Msv
WEA-38Msv
WEA-12Msv
Version R3/4 and
G
KW 0471
R1/8
KW 0472
R1/4
KW 0473
R3/8
KW 0752
R1/2
R1 on request
SW
I
L
9
14
17
21
8.0
10.5
11.5
14.0
16.5
24.5
26.5
31.5
L
I
G
SW
Elbow Adaptor, male taper / female parallel thread
SW
ØD
I
I1
L
L1
G1/8
G1/4
G3/8
G1/2
9
14
17
19
13.5
17
15
20
8
10.5
11.5
14
7
8
10.3
11.4
16.5
24.5
27.5
32
19.5
27
31.5
36.5
L
I
SW
L1
KW 0467
R1/8
KW 0468
R1/4
KW 0469
R3/8
KW 0470
R1/2
R1 on request
G1
I1
WEI-18Msv
WEI-14Msv
WEI-38Msv
WEI-12Msv
Version R3/4 and
G
G
Order Instructions
Type
Order No.
G1
∅D
Dimensions in mm
99
Standard Fittings
Equal Elbow Connector, female parallel thread
Order Instructions
Type
Order No.
G
SW
WII-18Msv
KW 0460
G1/8
9
WII-14Msv
KW 0461
G1/4
14
WII-38Msv
KW 0462
G3/8
17
WII-12Msv
KW 0463
G1/2
19
Taper Thread version R3/4 and R1 on request
ØD
I
L
13.5
17
20.5
25.5
7
8
10.3
11.4
19.5
27
31.5
36.5
I
L
∅D
SW
G
Equal Tee Connector, male taper thread
Order Instructions
Type
Order No.
G
TEC-18Msv
KW 0490
R1/8
TEC-14Msv
KW 0491
R1/4
TEC-38Msv
KW 0492
R3/8
TEC-12Msv
KW 0493
R1/2
SW
I
L
9
14
17
21
8
11
11.5
14
16.5
24.5
26.5
31.5
L
G
I
SW
Branch Tee Adaptor, male taper / female parallel thread
Order Instructions
Type
Order No.
G
G1
R1/8
G1/8
TEA-18Msv
KW 0482
TEA-14Msv
KW 0483
R1/4
G1/4
TEA-38Msv
KW 0484
R3/8
G3/8
TEA-12Msv
KW 0485
R1/2
G1/2
G1
L
I
I1
G
100
∅D
L1
SW
SW
ØD
I
I1
L
L1
9
14
17
19
13.5
17
21.5
25.5
8
11
11.5
14
7
8
10.3
11.4
16.5
24.5
27.5
32
19.5
27
31.5
36.5
Branch Tee Adaptor, male taper / female parallel thread
Order Instructions
Type
Order No.
G
G1
TEB-18Msv
KW 0486
R1/8
G1/8
TEB-14Msv
KW 0487
R1/4
G1/4
TEB-38Msv
KW 0488
R3/8
G3/8
TEB-12Msv
KW 0489
R1/2
G1/2
SW
ØD
I
I1
L
L1
10
14
17
21
13
17
21
25
8
11
11.5
14
8
8
11.5
14
21
27
28
35
19
24.5
26.5
31.5
L1
SW
I1
L
G
I
G1
∅D
Equal Tee Connector, female parallel thread
Order Instructions
Type
Order No.
G
SW
ØD
I
L
TI-18Msv
KW 0478
TI-14Msv
KW 0479
TI-38Msv
KW 0480
TI-12Msv
KW 0481
TI-34Msv
KW 0773
Version G1 on request
G1/8
G1/4
G3/8
G1/2
G3/4
9
14
17
19
31
13.5
17
21.5
25.5
33
7
8
10.3
11.4
11.4
19.5
27
31.5
36.5
30.3
L
G
∅D
I
SW
Y Adaptor, male / female parallel thread
SW
I
I1
L
L1
YAI-18Msv
YAI-14Msv
YAI-38Msv
YAI-12Msv
G1/8
G1/4
G3/8
G1/2
G1/8
G1/4
G3/8
G1/2
13
17
20
25
8
11
11.5
14
8
11
11.5
14
32
32
42
53
14.5
18
20.5
26.5
KW 0505
KW 0506
KW 0507
KW 0991
45°
L1
G1
I1
G1
I
G
L
Order Instructions
Type
Order No.
G
SW
Dimensions in mm
101
Standard Fittings
4-Way Cross Adaptor, male taper / female parallel thread
Order Instructions
Type
Order No.
G
G1
SW
ØD
I
I1
L
L1
TEF-18Msv
TEF-14Msv
TEF-38Msv
TEF-12Msv
R1/8
R1/4
R3/8
R1/2
G1/8
G1/4
G3/8
G1/2
12
14
17
21
13.5
17.5
20.5
25.5
8
11
11.5
15
7
8
10.3
14
19
25
26.5
33.5
20
27
28
35
KW 0502
KW 0503
KW 0504
KW 0988
L1
I1
∅D
I
L
G1
SW
G
4-Way Cross Connector, female parallel thread
Order Instructions
Type
Order No.
G
SW
ØD
I
L
KEI-18Msv
KEI-14Msv
KEI-38Msv
KEI-12Msv
G1/8
G1/4
G3/8
G1/2
12
14
17
21
13.5
17.5
21.5
25
7
8
10.3
11.4
20
27
31.5
35
KW 0464
KW 0465
KW 0466
KW 0987
G
∅D
SW
I
L
Equal Y Connector, female parallel thread
L
102
G
I
L1
L2
∅D
∅D1 ∅D1
G
I
Order Instructions
Type
Order No.
G
ØD
ØD1
I
L
L1
L2
YI-5Msv
YI-18Msv
YI-14Msv
M5
G1/8
G1/4
11
15
18
11
15.75
18.25
5
7
8
19.5
18
20
7
12
13
5.5
8.25
9.25
KW 0508
KW 0509
KW 0510
4-Way Manifold
Order Instructions
Type
Order No.
G
SW
ØD
L
L1
L2
VB-05
VB-18ALN
VB-14ALN
VB-38ALN
VB-12ALN
M5
G1/8
G1/4
G3/8
G1/2
8
16
20
26
32
4.5
5.5
5.5
5.5
14
25
40
50
50
17
26
34
34
4
7
8
8
KY 6691
KW 0474
KW 0475
KW 0476
KW 0477
SW
L
∅D
G
L2
L1
L
9-Way Manifold
Order Instructions
Type
Order No.
G
G1
(9x)
VL-185ALS
VL-3818ALS
VL-1214ALS
G1/8
G3/8
G1/2
M5
20 12
4.5
G1/8 30 19.5 5.5
G1/4 36 24
6.5
KY 6540
KY 6541
KY 6542
A
B
D
L
L1
50
15
80
24
100 30
L2
L3
L4
L5
15
24
30
12
20
23
18
30
36
18
28
34
Material: aluminium, black -anodized
L2
L3
L1
D
B
G
A
G1
L4
L5
L
Elbow Adaptor Block, male / female parallel thread
Order Instructions
Type
Order No.
G
A
I
L
L1
WE-05
WE-18
WE-14
WE-38
WE-12
M5
G1/8
G1/4
G3/8
G1/2
10
15
22
27
36
4.5
6.5
9
9
11
14
23
29
32
40.5
5
9
11
12
16
KY 6370
KY 6371
KY 6372
KY 6373
KY 6374
Material: aluminium, black -anodized
L1
A
G
G
I
L
Dimensions in mm
103
Standard Fittings
Tee Adaptor Block, male / female parallel thread
Order Instructions
Type
Order No.
G
TE-05
KY 6375
M5
TE-18
KY 6376
G1/8
TE-14
KY 6377
G1/4
TE-38
KY 6378
G3/8
TE-12
KY 6379
G1/2
Material: aluminium, black-anodized
L1
A
I
L
L1
10
15
22
27
36
4.5
6.5
9
9
11
14
23
29
32
40.5
5
9
11
12.5
16
A
G
G
I
L
Screw Plug, male parallel thread, hexagon socket and O-ring
Order Instructions
Type
Order No.
G
SW
ØD
I
L
VS-5Msv
VS-18Msv
VS-14Msv
VS-38Msv
VS-12Msv
M5
G1/8
G1/4
G3/8
G1/2
2.5
3
6
8
10
8
15
18
21
26
4
7
8
9
11
6.5
9.5
11
12.5
14.5
KW 0425
KW 0426
KW 0427
KW 0428
KW 0429
L
G
∅D
SW
I
Screw Plug, male parallel thread
I
G
SW
L
104
Order Instructions
Type
Order No.
G
SW
I
L
VS-5Msv
VS-18Msv
VS-14Msv
VS-38Msv
VS-12Msv
VS-34Msv
VS-10Msv
M5
G1/8
G1/4
G3/8
G1/2
G3/4
G1
8
14
17
19
24
30
36
3.5
6
8
9
10
9
11
6.5
11
13
14
15
14
18
KW 0985
KW 0430
KW 0431
KW 0432
KW 0433
KW 0434
KW 0986
Cap Nut, female parallel thread
Order Instructions
Type
Order No.
G
SW
I
L
UM-18Msv
UM-14Msv
UM-38Msv
UM-12Msv
G1/8
G1/4
G3/8
G1/2
14
17
20
24
7.0
8.0
10.3
11.4
12.0
14.0
16.0
19.0
KW 0435
KW 0436
KW 0437
KW 0438
I
G
SW
L
Sealing Rings
ØD1
ØD2
s
Material
M5
G1/8
G1/4
G3/8
G1/2
G3/4
G1
5
10
13.2
17
21
26.5
33.5
7.5
14
18
21
26
31
39
1
1.5
1.5
1.5
1.5
2
1.0
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
M5
G1/8
G1/4
G3/8
G1/2
5
10
13.2
17
21
7.5
14
18
21
26
1
1.5
1.5
1.5
1.5
PVC, hard
PVC, hard
PVC, hard
PVC, hard
PVC, hard
M5
G1/8
G1/4
G3/8
G1/2
5
10
13.5
17
21
7.5
14
18
21
26
1
1.5
1.5
1.5
1.5
Copper
Copper
Copper
Copper
Copper
S
∅D2
Aluminium Sealing Rings
DI-5AL
KZ 7669
DI-18AL
KW 0349
DI-14AL
KW 0350
DI-38AL
KW 0351
DI-12AL
KW 0352
DI-34AL
KZ 7865
DI-10AL
KZ 7866
Plastic Sealing Rings
DI-5KU
KW 0582
DI-18KU
KW 0354
DI-14KU
KW 0355
DI-38KU
KW 0356
DI-12KU
KW 0357
Copper Sealing Rings
DI-5CU
KW 0583
DI-18CU
KW 0584
DI-14CU
KW 0585
DI-38CU
KW 0586
DI-12CU
KW 0587
for
Port Size
∅D1
Order Instructions
Type
Order No.
Pressure Gauge Sealing Ring
Order Instructions
Type
Order No.
MD-18
KZ 7430
MD-14
KZ 7431
for
Port Size
G1/8
G1/4
ØD1
ØD2
s
Material
9.4
12.8
15
18.6
4.2
4.5
Plastic
Plastic
∅D2
∅D1
S
Dimensions in mm
105
Standard Fittings
Thread Sealing Tape
106
Order Instructions
Type
Order No.
Thickness
Length
GD-128
0.08 mm
12 m
KY 9426
Tube/ Hose Fittings
Fittings for Tubing and Hoses
in Special Applications
Sealing: by hose clip
■ Metal types: nickel-plated brass with male
parallel thread and integrated O-ring
for thread sealing
■ Plastic types in combination with plastic
push-in fittings
(see Section on Push-in Fittings)
■ Metal types (nickel-plated brass) in
combination with quick-release couplings
(see Section on Miscellaneous Accessories)
Technical Data
Connecting thread
G1/8, G1/4, G3/8, G1/2, G3/4 (parallel)
Tubing/ hose outside diameter
Ø4, Ø6, Ø8, Ø9, Ø11, Ø13, Ø19
(recommended sizes)
Material
Body: nickel-plated brass; O-ring: NBR
0 to 18 bar
Medium
Tubing/ Hose Recommendations1)
Tubing/ hose type
Depending on application
Tubing/ hose material
PVC (polyester-braided or glassfibre-reinforced)
PU
1)
see Section on Tubing and Hoses, pages 109–111
Dimensions in mm
107
Tube/ Hose Fittings
Tube/ Hose Adaptor, male parallel thread with O-ring
L1
G
SW
L
Order Instructions
Type
Order No.
Tube/ Hose Thread
ØID
G
L
L1
SW
STO-184Msv
STO-186Msv
STO-146Msv
STO-188Msv
STO-148Msv
STO-388Msv
STO-149Msv
STO-389Msv
STO-1211Msv
STO-3813Msv
STO-1213Msv
STO-3413Msv
STO-3419Msv
4
6
6
8
8
8
9
9
11
13
13
13
19
31
31
33
31
33
34
33
34
36
39
41
45
48
6
6
8
6
8
9
8
9
11
9
11
14
14
15
15
18
15
18
21
18
21
26
21
26
32
32
KW 0974
KW 0439
KW 0440
KW 0442
KW 0443
KW 0444
KW 0975
KW 0976
KW 04471)
KW 0977
KW 0978
KW 0979
KW 0980
1)
G1/8
G1/8
G1/4
G1/8
G1/4
G3/8
G1/4
G3/8
G1/2
G3/8
G1/2
G3/4
G3/4
type to be discontinued
Tube/ Hose Stem Adaptor*
Order Instructions
Type
Order No.
SST-84P
SST-86P
SST-108P
Material: plastic
NW
Tube/ Hose
ØOD/ID
KX 5326
2.8
6/4
KX 5327
3.5
8/6
KX 5328
6.7
10/8
* see also page 117
Stem
ØA
ØD
L
L1
L2
6
8
10
13.0
14.8
17.8
41.8
43.1
46.1
18.0
19.3
22.2
20.8
20.8
20.8
L
L1
L2
24
24
32
32
48
48
48
48
48
10
10
14
14
20
20
20
20
21.5
13
13
17
17
25
25
25
25
25
L
L2
∅A
∅D
L1
Quick Release Coupling Plug, hose barb*
Order Instructions
Type
Order No.
L
L1
108
L2
NW
Tube/ Hose
ØID
ST-32
KX 5657
2.7
3
ST-42
KX 5658
2.7
4
ST-45
KY 6452
5
4
ST-65
KY 6453
5
6
ST-47
KY 6454
7.8
4
ST-67
KX 5053
7.8
6
ST-97
KY 6455
7.8
9
ST-137
KY 6456
7.8
13
ST-1310
KY 6197
10
13
Material: nickel-plated brass (ST-1310: nickel-plated steel)
* see also page 117
Tubing and Tubing Accessories
Quality Tubing
for a Wide Range of Applications
– to match the Fittings programme
Tubing Accessories
Hose clips
Tube holder racks
Tube cutters ...
– see pages 112, 113
Technical Data (Type STO)
Material
Polyethylene, polyurethane, nylon, PVC (polyester-braided),
PVC (glassfibre-reinforced), rubber (metal-braided)
See specific data
Temperature range
See specific data
Bending radii
See specific data
Characteristics and resistance*
Polyethylene tubing (HOERBIGER Type PE-.):
Low cost tubing for general use (not suitable for push-in fittings), lightweight,
impact resistant and generally resistant to acids, alkalis and salt solutions.
Tubing runs should be straight (danger of cracking).
Polyurethane tubing (HOERBIGER Type PU-.):
Good recovery properties (low deformation), high tear resistance, very good cold
flexibility, resistant to most lubricating oils, resistant to ageing with oxygen and
ozone, especially flexible.
Nylon (HOERBIGER Type PS-.):
Flexible tubing (calibrated) for use with push-in fittings, high impact and notched bar
impact resistance, lightweight and easy to install, resistant to hydraulic oils and fuels.
PVC tubing (HOERBIGER Type DH-. , polyester-braided):
Flexible, resistant to weathering and ageing, generally resistant to diluted acids,
alkalis, greases and various oils, resistant to abrasion.
PVC tubing (HOERBIGER Type DVOH-. , glassfibre-reinforced):
Especially flexible, lightweight tubing with high pressure resistance, generally
resistant to diluted acids, alkalis, greases and various oils, especially suitable for
pneumatic-hydraulic systems.
Rubber tubing (HOERBIGER Type PBM-., metal-braided):
Oil-resistant rubber tubing with metal braiding for protection
(e.g. for welding systems).
* These are general notes: for special applications, the suitability of the tubing should always be carefully checked.
Dimensions in mm
109
Tubing
Polyethylene Tubing
Order Instructions – Colors
Transparent
Blue
Black
Type
PE-42
M857-5149
M857-5443
PE-53
M857-5299
M857-5059
PE-64
M857-5183
M857-5064
PE-86
M857-5184
M857-5070
PE-108
M857-5185
M857-5073
Size Ø OD/ID 12/10 available on request
M857-5381
M857-5152
M857-5066
M857-5298
M857-5365
Tube
ØOD/ID
Permissible Pressure (bar)
20°C
50°C (tmax)
Min. Bending
Radius (mm)
Length/
Roll
4/2
5/3
6/4
8/6
10/8
20
15
13
8
6
20
25
30
40
60
50
50
50
50
50
12
9
8
5
4
m
m
m
m
m
Polyurethane Tubing
Type
Order Instructions – Colors
Transparent
Blue
Black
Tube
ØOD/ID
20°C
50°C (tmax)
Min. Bending
Radius (mm)
Length/
Roll
PU-42
PU-53
PU-64
PU-86
PU-108
KW 0995
M814-5255
M814-5062
M814-5175
M814-5173
4/2
5/3
6/4
8/6
10/8
8
8
8
8
8
13
14
20
36
48
50
50
50
50
50
Tube
ØOD/ID
20°C
90°C*(tmax)
Min. Bending
Radius (mm)
Length/
Roll
45
34
27
19
15
12
16
30
25
30
40
60
85
80
50
50
50
50
50
50
50
Min. Bending
Radius (mm)
Length/
Roll
KW 0996
M814-5059
M814-5064
M814-5070
M814-5073
KW 0997
M814-5152
M814-5066
M814-5298
M814-5368
5,5
5,5
5,5
5,5
5,5
m
m
m
m
m
Nylon Tubing for Push-in Fittings
Type
Order Instructions – Color
Transparent
Blue
Black
PS-427
PS-53
PS-64
PS-86
PS-108
PS-1210
PS-1411
* at +50°C
M812-5322
M812-5454 M812-5408
4/2.7
M812-5366
M812-5455 M812-5457
5/3
M812-5323
M812-5386 M812-5458
6/4
M812-5324
M812-5389 M812-5459
8/6
M812-5332
M812-5412 M812-5460
10/8
M812-5333
M812-5456 M812-5461
12/10
KW 0906
KW 0907
KW 0908
14/11
the permissible pressure is 3 times the value at +90°C
9
7
5.5
4
3
2.5
3.2
m
m
m
m
m
m
m
Polyester-braided PVC Tubing
Type
Transparent
DH-126N
DH-148N
DH-159N
DH-1610N1)
DH-1912N
DH-2013N
DH-2719N
1)
M870-5307
M870-5304
M870-5305
M870-52611)
M870-5306
M870-5262
KW 0962
Tube
ØOD/ID
20°C
60°C (tmax)
12/6
14/8
15/9
16/10
19/12
20/13
27/19
18
16
14
12
12
12
10
Tube
ØOD/ID
20°C
60° (tmax)
Min. Bending
Radius (mm)
Length/
Roll
6.2/4
8.2/6
10.2/8
15/12.5
40
40
35
28
50
60
65
80
50
50
50
50
10
8
7
6
6
6
5
Ca. 10 x
tube inside
diameter
50
50
50
50
50
50
50
m
m
m
m
m
m
m
type to be discontinued
Glassfibre-reinforced PVC Tubing
Type
DVOH-64B
DVOH-86B
DVOH-108B
DVOH-1512B
110
Blue
M870-5303
M870-5302
M870-5300
M870-5301
28
28
24
20
m
m
m
m
Glassfibre-reinforced PVC Tubing
Blue
Type
DVOH-64B
DVOH-86B
DVOH-108B
DVOH-1512B
M870-5303
M870-5302
M870-5300
M870-5301
Tube
ØOD/ID
20°C
60° (tmax)
Min. Bending
Radius (mm)
Length/
Roll
6.2/4
8.2/6
10.2/8
15/12.5
40
40
35
28
50
60
65
80
50
50
50
50
28
28
24
20
m
m
m
m
Metal-braided Rubber Tubing
Type
Silver
PBM-96S
PBM-129S
M850-5437
M850-5438
Tube
ØOD/ID
20°C
Minimum Bending
Radius (mm)
Length/
Roll
9/6
12/9
12
12
30
45
50 m
50 m
Nylon Spiral Tubing (with or without connectors G1/8, G1/4)
Type
Order No.
Version
Colour
Tube
ØOD/ID
Perm. Pressure
(bar) 20°C
Working
Length
Spiral Ø
Inside
PAS-64N
PAS-86N
PAS-64B
PAS-86B
PAS-108B
KW 0719
KW 0720
KY 0050
KY 0048
KY 0051
Transparent
Transparent
Blue
Blue
Blue
6/4
8/6
6/4
8/6
10/8
12
12
12
12
12
5
5
5
5
5
60
60
60
60
60
without connectors
without connectors
with connectors G1/8
m
m
m
m
m
Dimensions in mm
111
Tubing Accessories
Tube Holder Rack (10-fold)
Order Instructions
Type
Order No.
Tube
ØOD
B
H
L1
D2
e1
e2
m1
KL-53*
KL-64
KL-86
KL-108
5
6
8
10
13.5
13.5
15.5
18
9
9
12
15
96
105
135
119.2
2.5
3
3
2.8
4.3
5.2
6.8
8.6
6
5.5
7.5
10
9.7
10.5
13.5
20.4
KX 5614
KX 5615
KX 5616
KZ 4953
* also for tube ØOD = 4
Material: Nylon PA 6
L1
H
m1
e2
e1 m1
B
D2
Elbow Tube Holder
Order Instructions
Type
Order No.
Tube
ØOD
A
B
C
D
E
F
G
HB-8P
HB-10P
Material: POM
8
10
37
47
13
15
10
12
22
30
3.2
3.2
6.6
6.6
1.7
1.7
KX 5329
KX 5330
C
A
E
B
G
F
D
Tube Bundling Spiral
Order Instructions
Type
Order No.
SBS
112
KX 5613
Number of Tubes
Tube
ØOD/ID
20
15
8
5
5/3
6/4
8/6
10/8
Hose Clip
Order Instructions
Type
Order No.
Tubing Range
SCH-812
KX 5622
SCH-1016
KX 5623
SCH-1220
KX 5624
SCH-1625
KX 5399
SCH-2032
KX 0934
SCH-2540
KY 6901
Material: zinc-plated steel
8-12 mm
10-16 mm
12-20 mm
16-25 mm
20-32 mm
25-40 mm
O-Clip
Order Instructions
Type
Order No.
Tubing Range
SCHK-911
KX 5617
SCHK-1113
KX 5618
SCHK-1315
KX 5619
SCHK-1417
KX 5620
SCHK-1820
KX 5621
Material: zinc-plated steel
9-11 mm
11-13 mm
13-15 mm
14-17 mm
18-20 mm
Tube Cutter
Order Instructions
Type
Order No.
PSA-1
KY 6813
Material: plastic/steel
Dimensions in mm
113
114
Accessories
Air Line Accessories
■
■
■
■
■
Quick release couplings, self-sealing
3/2 way slide valves
Manifolds with integrated ball valves
Ball valves
Blow guns
Technical Data
Versions
NW 2.7; NW 5; NW 7.8; NW 10
Material
Brass
0 to 35 bar
Temperature range
-20°C to +100°C
(NW 10 nipple: nickel-plated steel)
3/2 Way Slide Valves*
Quick release couplings, Medium
self-sealing
Ball valves*
Blow guns*
Versions
G1/8, G1/4, G3/8, G1/2
Material
Body: brass; sleeve: aluminium
Versions
G1/4, G3/8, G1/2, G3/4, G1 (with or without venting)
Material
Nickel-plated brass
Versions
For NW 6 and NW 9 tubing
Material
Aluminium
*suitable for the usual pressure and temperature ranges for pneumatic systems (0°C to 80°C, 0 to 16 bar).
Other pressure and temperature ranges on request
Dimensions in mm
115
Accessories
Quick Release Coupling Body, self-sealing, male parallel thread
NW
G
ØD
I
L
SW
KA-525
KA-185
KA-145
KA-187
KA-147
KA-387
KA-127
KA-3410
2.7
5
5
7.2
7.2
7.2
7.2
10
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/2
G3/4
10
16
16
27
27
27
27
28
5
7
9
9
9
9
12
17
26
36
38
43
43
43
46
65
9
14
17
22
22
22
22
27
KX 5640
KY 1006
KY 1007
KY 1008
KY 1009
KY 1010
KY 1011
KX 6198
G
∅D
L
Order Instructions
Type
Order No.
I
SW
Quick Release Coupling Body, self-sealing, female parallel thread
NW
G
ØD
I
L
SW
KI-525
KI-185
KI-145
KI-187
KI-147
KI-387
KI-127
KI-3410
2.7
5
5
7.8
7.8
7.8
7.8
10
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/2
G3/4
10
16
16
25
27
27
27
28
5
9
9
8
9
9
12
16
26
36
38
45
43
43
46
61
9
14
17
22
22
22
24
32
KX 5647
KY 1012
KY 1013
KY 1014
KY 1015
KY 1016
KY 1017
KX 6199
G
∅D
L
Order Instructions
Type
Order No.
I
SW
Quick Release Coupling Plug, compression fitting
SW
L1
L
116
Order Instructions
Type
Order No.
NW
Tube
ØOD/ID
L
L1
SW
SV-532
SV-642
SV-645
SV-865
SV-647
SV-867
SV-1087
2.7
2.7
5
5
7.8
7.8
7.8
5/3
6/4
6/4
8/6
6/4
8/6
10/8
25
25
32
32
34
34
42
10
10
14
14
20
20
20
7
8
12
12
14
14
14
KX 5654
KX 5655
KY 6447
KY 6448
KY 6449
KY 6450
KY 6451
Quick Release Coupling Plug, male parallel thread
Order Instructions
Type
Order No.
NW
G
I
L
L1
SW
SA-525
SA-185
SA-145
SA-187
SA-147
SA-387
SA-127
SA-340
2.7
5
5
7.8
7.8
7.8
7.8
10
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/2
G3/4
5
7
9
6.5
9
9
12
19
18
25
28
31
33
33
38
46
10.5
14
14
20
20
20
20
21.5
7
14
17
14
17
19
22
27
KX 5659
KY 6457
KY 6458
KY 6459
KY 6460
KY 6461
KY 6462
KX 6200
G
Material: nickel-plated brass (SA-340: nickel-plated steel)
SW
I
L1
L
Quick Release Coupling Plug, female parallel thread
Order Instructions
Type
Order No.
NW
G
I
L
L1
SW
SI-525
SI-185
SI-145
SI-187
SI-147
SI-387
SI-127
2.7
5
5
7.8
7.8
7.8
7.8
M5
G1/8
G1/4
G1/8
G1/4
G3/8
G1/2
5
8
9
8
18
10
12
17
25
26
30
33
33
36
10
14
14
18
18
18
18
7
14
17
14
17
19
22
I
SW
G
KX 5636
KY 6463
KY 6464
KY 6465
KY 6466
KY 6467
KY 6468
L1
L
Quick Release Coupling Plug, hose barb
Order Instructions
Type
Order No.
NW
ST-32
KX 5657
2.7
ST-42
KX 5658
2.7
ST-45
KY 6452
5
ST-65
KY 6453
5
ST-47
KY 6454
7.8
ST-67
KX 5053
7.8
ST-97
KY 6455
7.8
ST-137
KY 6456
7.8
ST-1310
KX 6197
10
Material: Messing nickel-plated (ST-1310
Tube
ØID
L1
3
24
4
24
4
32
6
32
4
48
6
48
9
48
13
48
13
48
Steel nickel-plated)
L2
L3
10
10
14
14
20
20
20
20
21.5
13
13
17
17
25
25
25
25
25
L
L1
L2
Dimensions in mm
117
Accessories
3/2 Way Slide Valves
Order Instructions
Type
Order No.
HS-05
HS-18
HS-14
HS-38
HS-12
KC4303
KC4304
KC4305
KC4306
KC4307
NW
G
ØD
L
SW
6
8
10
15
M5
G1/8
G1/4
G3/8
G1/2
30
25
30
35
40
10
48
58
68
80
10
14
19
22
27
G
ÆD
L
SW
Manifold
with integrated
Ball Valves
Characteristics to VDI 3293
Characteristics
Description
Series VL
Series
Manifold with integrated ball valves
Type
VL-3/8
Port size
Input 2 x G3/8, Output 6 x G1/4
Symbol Unit
General features
NW (DN) mm
Nominal bore
8
Mounting
2 screws M5
Material
Housing – anodized aluminium
Ball/spindle – chrome-plated brass Ms 58
Ball seal – Teflon (PTFE)
O-rings – Buna N (NBR)
Temperature range
pmax.
°C
-10 to +100
bar
10
Actuation
Screwdriver (size 4 – 6 mm)
Actuation angle
90°
Weight (mass)
kg
0.65
Dimensions
Mounting holes
for M5
This manifold (with integrated
ball valves) allows individual
sections of a machine to be
shut off. The slot indicates the
position of the ball valves.
Slot for operating
ball valves
15
26
157
12
8
26
40
52
G3/8
9
G1/4
25
25
11
175
Order Instruction: Type VL3/8
118
Order No. KL4088
Ball Valves without venting
Order Instructions
Type
Order No.
NW
G
ØD
L
I
H
R
SW
KH-14
KH-38
KH-12
KH-34
KH-10
6
10
15
20
25
G1/4
G3/8
G1/2
G3/4
G1
25
25
33
44
48
39
39
50
54
67
8,5
8,5
10,0
11,0
13,0
38
38
43
50
54
82
82
100
120
120
20
20
25
31
38
KZ 4451
KZ 4452
KZ 4453
KZ 4454
KZ 4455
G
∅D
H
R
I
SW
L
Ball Valves with venting
Order Instructions
Type
Order No.
NW
G
ØD
L
I
H
R
SW
KHE-14
KHE-38
KHE-12
KHE-34
KHE-10
KHE-12BE *
6
10
15
20
25
15
G1/4
G3/8
G1/2
G3/4
G1
G1/2
28
28
34
43
52
34
51
51
60
72
84
60
11
11,5
15
16,5
19
15
44
44
52
59
63
52
98
98
98
122
122
98
22
22
27
32
41
27
KZ 4660
KZ 4701
KZ 4683
KZ 4702
KZ 4703
KW 0643
R
G
ÆD
H
* Lockable version
I
SW
L
Exhaust M5
G2
L
l1
l2
H
R
SW
KHM-18AI
KW 0709
KHM-14AI
KW 0708
Other sizes on request
5.5
5.5
G1/8
G1/4
G1/8
G1/4
34
35
7
8
7
7
21
21
19
19
14
14
R
H
G1
SW
G1
NW
G2
Order Instructions
Type
Order No.
l2
l1
L
Dimensions in mm
119
Accessories
Order Instructions
Type
Order No.
KHM-18I
KW 0707
KHM-14I
KW 0702
Other sizes on request
NW
G1
G2
L
l1
l2
H
R
SW
5.5
5.5
G1/8
G1/4
G1/8
G1/4
35
37
7
8
7
8
21
21
19
19
14
14
G1
G2
H
R
l2
l1
SW
L
Spray Guns with Nipples
L1
∅D G
Order Instructions
Type
Order No.
BP-6
KY 8915
BP-9
KY 8916
L
120
NW
G
L
L1
ØD
6
9
M12 x 1.25
M12 x 1.25
92
92
140
140
1.5
1.5
Dimensions in mm
122
123
HOERBIGER-ORIGA
...your competent partner
with global service and distribution
for more information visit the following web sites
www.hoerbiger-origa.com
www.interact-system.com
www.airfit.com
www.hoerbiger.com
or contact your local HOERBIGER-ORIGA company
AE
AT
AU
CH
CN
DE
ES
FR
GB
IT
JP
NO
NL
MY
PT
SG
SE
US
ZA
HOERBIGER SERVICE MIDDLE EAST FZE • Jebel Ali Free • P.O. Box 07153 • Dubai, United Arab Emirates • Tel. +971 +4 8814567 • Fax +971 +4 8817123 • e-mail: [email protected]
HOERBIGER-ORIGA Pneumatik GmbH • Dr. Alexander-Schärf-Straße 12 • AT-2700 Wiener Neustadt • Tel. +43 +2622 26071-269 • Fax +43 +2622 26071-266 • e-mail: [email protected]
HOERBIGER AUSTRALIA PTY.LTD. • 21 David Street • AU-3175 Dandenong, Victoria • Tel. +61 (0)3 9793 9488 • Fax +61 (0)3 9706 8152 • e-mail: [email protected]
HOERBIGER-ORIGA AG • Industriestr. 30 • CH-8112 Otelfingen (Zürich) • Tel. +41 (0)1 846 6860 • Fax +41 (0)1 846 6870 • e-mail: [email protected]
HOERBIGER (WUXI) AUTOMATION TECHNOLOGY CO., LTD. • A2-A, Machinery & Electronics Park • Wuxi National High-Tech Zone • Wuxi 214028, China • Tel. +86 510 520 3468 • Fax +86 510 520 3498 • e-mail: [email protected]
HOERBIGER-ORIGA GmbH • Industriestr. 8 • DE-70794 Filderstadt • Tel. +49 (0)7158 1703-0 • Fax +49 (0)7158 64870 • e-mail: [email protected]
HOERBIGER-ORIGA S.A. • Pol. Ind. El Nogal • c/Nogal 8 • ES-28110 Algete (Madrid) • Tel. +34 91 629 09 00 • Fax +34 91 629 24 08 • e-mail: [email protected]
HOERBIGER-ORIGA S.A. • 11 avenue de Norvège • FR-91978 Courtaboeuf • Tel.+33 (0)1 69 29 22 00 • Fax +33 (0)1 69 29 22 10 • e-mail: [email protected]
HOERBIGER-ORIGA Ltd. • Tewkesbury Industrial Estate • Tewkesbury GL 20 8 ND GB • Tel. +44 1684 85 00 00 • Fax +44 1684 85 05 55 • e-mail: [email protected]
HOERBIGER-ORIGA S.R.L. • Via Martiri della Libertà 4/6 • IT-20060 Liscate (MI) • Tel. +39 02 95 35 03 07 • Fax +39 02 95 35 05 13 • e-mail: [email protected]
HOERBIGER AUTOMATION Technology Representative Office Japan • 501, 2-17-11 Shin-Yokohama, Kohokuku • JP-222 -0033 Yokohama • Tel. +81 (0)45 4760 636 • Fax +81 (0)45 4760 637 • e-mail: [email protected]
HOERBIGER-ORIGA AS • Postboks 2173 Strømsø • NO-3003 Drammen • Tel. +47 3 288 08 40 • Fax +47 32 82 83 20 • e-mail: [email protected]
HOERBIGER-ORIGA B.V. • Plaza 11C • NL-4782 SL Moerdijk • Tel. +31 168 356 600 • Fax. +31 168 356 601 • e-mail: [email protected]
HOERBIGER-ORIGA Sdn Bhd • No. 10 & 12 Lorong IKS Juru 3 • MY-14100 Simpang Ampat, Penang • Tel. +60 (0)4 508 10 11 • Fax +60 (04 508 21 22 • e-mail: [email protected]
HOERBIGER-ORIGA S.A. • Rua Luz Soriano, 42 • P-4200-380 Porto • Tel. +35 1 22 550 71 79 • Fax. +35 1 22 509 22 51 • e-mail: [email protected]
HOERBIGER-ORIGA Pte Ltd • 5012 #05-01 Ang Mo Kio Ave 5, Techplace II • SG-569876 Singapore • Tel. +65 6483 2959 • Fax +65 6483 29 79 • e-mail: [email protected]
HOERBIGER-ORIGA AB • Kungsgatan 14, Box 67 • SE-73622 Kungsör • Tel. +46 227 411 00 • Fax +46 227 411 29 • e-mail: [email protected]
HOERBIGER-ORIGA Corporation • 100 West Lake Drive • IL-60139 Glendale Heights, Illinois, USA • Tel. +1 630 871 830-0 • Fax +1 630 871 1515 • e-mail: [email protected]
HOERBIGER-ORIGA (SA) (PTY) Ltd • P.O. Box 17846 • ZA-Randhart 1457 • Tel. +27 (0)11 908 13 10 • Fax +27 (0)11 908 13 12 • e-mail: [email protected]
The Strategic Business Units of the HOERBIGER Group
SBU Compression
Technology
Your Contact
SBU Automation
Technology
SBU Drive
Technology
A4P021E-July 2004
A4P021E61GAE30X
The right to introduce technical
modifications is reserved
Additional representatives can be found on the Internet

Fittings, Tubing and Accessories

Transcription

Similar documents

Pneumatic Accessories