docNorsk Staal 2009 Engelsk 141209.indd
download 
Report Transcription
Norsk Staal 2009 Engelsk 141209.indd
Norsk Stål is a leading supplier of steel and metals in Norway. With this catalogue, we wish to give you an english version of our product catalogue. Norsk Stål provides services; shotblasting and priming, cutting, machine cutting, flame and plasma cutting. You can read more about these services under Information / Other services, or look for Pre-treatment under www.norskstaal.no/export. Norsk Stål wishes to be your partner in Norway, relating to delivery of steel and metals. Our export department are at your service. Please do not hesitate to contact us; [email protected] or by phone 47 66 84 28 00. On www.norskstaal.no you can read more about Norsk Stål and our export department. Look for Export in the menu. Foto: Harald Valderhaug This catalogue is an extract of products we have in stock. You will find our full assortment of products in our product catalouge on www.norskstaal.no (in Norwegian). December 2009 LIST OF CONTENT 1 Steel plates - Hot Rolled 2 Profiles - Hot Rolled 3 Beams and channels - Hot Rolled + Cold formed channels page 22-26 page 31 4 Structural Hollow Sections 5 Steel Sheets + Expanded Metals and gratings Hot dipped galvanized and elctrolytic sheets Expanded Metals and gratings 6 Aluminium 7 Tables 8 Information / Other services page 27-30 page 32 page 33-34 page 35-38 page 39-48 page 49 STEELSHEETS Cold- and hot formed hollow sections Aluminium UNP, UPE, IPE, HEA, HEB Cold formed channels page13-21,31 TABLES Rounds, half rounds, flats, wide flats, bulb flats, angles, squares, tees and L-profiles . page 3-12 Information/ other services CONTENT Product Page STEEL PLATES - HOT ROLLED Steel plates S235JR/Domex 240YP Steel plates NVA Steel plates for pressure purposes P 265GH Steel plates for pressure purposes P 355NL2 Steel plates S355J2 + N Steel plates NVE 36 Steel plates S355G10 + N/M Steel plates S420G2 + M/Q Steel plates Domex S355MCD/E Steel plates Domex S355MCD/E/B Steel plates Domex S500MCD - Steel plates Domex S650MCD Steel plates Domex S700MCD Steel plates Domex 355W - Cor-Ten Steel plates Weldox 700E/S690QL Steel plates Abrasion resistant Hardox 450 Steel plates Abrasion resistant Hardox 500 Steel checker plates S235JR Steel tear plates S235JR Steel tear plates NVA 3 3 5 5 7 8 8 10 8 8 9 9 9 9 10 11 11 12 12 12 STEEL PROFILES - HOT ROLLED Steel rounds S235JR Steel rounds NVA Steel rounds/shafts S355J2+N Steel rounds S355J0 Steel rounds/shafts 34CrNiMo6 Steel half rounds NVA Steel squares S235JR Steel flats S235JR Steel flats NVA Steel flats S355J2 Steel flats rails S355J0 Steel crane rails Steel wide flats NVA Steel wide flats S355J2 L-profile NVD 36 Steel bulb flats (HP) NVA Steel bulb flats (HP) NVD 36 Steel angles S235JR Steel angles NVA Steel angles S355J2 Steel tees S235JR 13 13 13 14 14 14 14 15 16 17 17 17 17 17 18 18 18 19 20 21 21 STEEL BEAMS AND CHANNELS - HOT ROLLED Steel channels UNP S235JR Steel channels UNP S355J2 Steel channels UNP S355G11 + N/M Steel channels UPE S355N Steel sections IPE S355J2 Steel sections IPE S355G11 + N/M Steel beams HEA S355J2 Steel beams HEA S355G11 + N/M Steel beams HEB S355J2 Steel beams HEB S355G11 + N/M 22 22 23 23 24 24 25 25 26 26 2 Product Page STEEL, STRUCTURAL HOLLOW SECTIONS Welded circular Hybox S355J2H Cold formed Hybox S355J2H Hot formed Celsius S355NH 27 27-28 29-30 CHANNELS AND ANGLES, COLD-FORMED Centerless rounds/shafts SS2142 Channels S235JR Angles S235JR 30 31 31 STEEL SHEETS Cold reduced DC01AM Hot dipped galvanized Electrolytic galvanized Aluzink steel plates Expamet Expanded Metal Gratings for offshore 31 32 32 32 33 34 ALUMINIUM Aluminium sheets Aluminium tread plates Aluminium ship-plates Aluminium round bars/shafts Aluminium flats Aluminium angles Aluminium steel explosice welded transistion joints TABLES European Standards (EN) Compares new European standards and earlier national standards Information Pre-treatment services www.norskstaal.no 35 36 36 36 37 37-38 38 39 40 49 STEEL Steel plates S235JR/DOMEX 240YP, Lazerplates Steel plates S235JR/DOMEX 240YP, Lazerplates Acc. to EN 10 025-2 Unique properties regarding Cold forming, tight bend radius and suitable for lazer cutting Tolerances and flatness acc. to EN 10 051 Inspection certificate acc. to EN 10 204-3.1 Quality marked along one side Acct. to EN 10 025-2. Pickled and lightly oiled Uniqe properties regarding Cold forming, tight bend and suitable for lazer cutting Tolerances and flatness acc. to EN 10 051 Inspections certificate acc. to EN 10 204-3.1 Quality marked along one side Delivered as single sheets or in approx. 2000 kgs envelopes. ARTICLE GROUP 135 Article no. Dimension Kg/plate 135008 135015 135020 135021 135022 135025 3,00 X 1000 X 2000 MM 3,00 X 1250 X 2500 MM 3,00 X 1250 X 3600 MM 3,00 X 1500 X 3000 MM 3,00 X 1500 X 3600 MM 3,00 X 1500 X 5000 MM 48.00 75.00 108.00 108.00 130.00 180.00 135036 135043 135052 4,00 X 1000 X 2000 MM 4,00 X 1250 X 2500 MM 4,00 X 1500 X 3000 MM 64.00 100.00 144.00 135064 135071 135074 135084 5,00 X 1000 X 2000 MM 5,00 X 1250 X 2500 MM 5,00 X 1500 X 3000 MM 5,00 X 1500 X 5000 MM 80.00 125.00 180.00 300.00 135120 135127 135140 6,00 X 1000 X 2000 MM 6,00 X 1250 X 2500 MM 6,00 X 1500 X 3000 MM 96.00 150.00 216.00 135185 135190 135200 8,00 X 1000 X 2000 MM 8,00 X 1250 X 2500 MM 8,00 X 1500 X 3000 MM 128.00 200.00 288.00 135220 135225 135300 10,00 X 1000 X 2000 MM 10,00 X 1250 X 2500 MM 10,00 X 1500 X 3000 MM 160.00 250.00 360.00 135315 135320 135325 12,00 X 1000 X 2000 MM 12,00 X 1250 X 2500 MM 12,00 X 1500 X 3000 MM 192.00 300.00 432.00 135328 135330 135340 15,00 X 1000 X 2000 MM 15,00 X 1250 X 2500 MM 15,00 X 1500 X 3000 MM 240.00 375.00 540.00 ARTICLE GROUP 134 Article no. Dimension Kg/plate 134020 134025 2,0 X 1000 X 2000 MM 2,0 X 1250 X 2500 MM 32.00 50.00 134028 2,5 X 1000 X 2000 MM 40.00 134031 134035 134038 3,0 X 1000 X 2000 MM 3,0 X 1250 X 2500 MM 3,0 X 1500 X 3000 MM 48.00 75.00 108.00 134041 134045 134048 4,0 X 1000 X 2000 MM 4,0 X 1250 X 2500 MM 4,0 X 1500 X 3000 MM 64.00 100.00 144.00 134051 134052 134055 134058 5,0 X 1000 X 2000 MM 5,0 X 1000 X 2000 MM 5,0 X 1250 X 2500 MM 5,0 X 1500 X 3000 MM 80.00 80.00 125.00 180.00 134061 134065 134068 6,0 X 1000 X 2000 MM 6,0 X 1250 X 2500 MM 6,0 X 1500 X 3000 MM 96.00 150.00 216.00 134075 134078 8,0 X 1250 X 2500 MM 8,0 X 1500 X 3000 MM 200.00 288.00 134085 134088 134098 10,0 X 1250 X 2500 MM 10,0 X 1500 X 3000 MM 12,0 X 1500 X 3000 MM 250.00 360.00 432.00 Steel plates NVA Thickness tolerances acc. to DNV rules Remaining tolerances acc. to EN 10 029 Class B Inspection certificate acc. to EN 10 024 3.2-DNV Chargenumber stamped in the material. White circle around chargenumber ARTICLE GROUP 144 Article no. 144006 144007 144008 144009 144010 www.norskstaal.no Dimension 3,00 X 1500 X 3,00 X 1800 X 3,00 X 1800 X 3,00 X 1800 X 3,00 X 2000 X 5000 MM 4000 MM 5000 MM 6000 MM 6000 MM Kg/plate 180.00 173.00 216.00 259.00 288.00 3 Article no. STEEL Dimension Kg/plate 144030 144032 144035 144040 144041 144042 4,00 X 1500 X 4,00 X 1500 X 4,00 X 1800 X 4,00 X 1800 X 4,00 X 2000 X 4,00 X 2500 X 5000 MM 6000 MM 5000 MM 6000 MM 6000 MM 5000 MM 240.00 288.00 288.00 346.00 384.00 400.00 144065 144070 144075 144085 144090 144093 144094 5,00 X 1500 X 5,00 X 1800 X 5,00 X 1800 X 5,00 X 2000 X 5,00 X 2000 X 5,00 X 2500 X 5,00 X 2500 X 6000 MM 5000 MM 6000 MM 5000 MM 6000 MM 6000 MM 8000 MM 360.00 360.00 432.00 400.00 480.00 600.00 800.00 144124 144140 144141 144143 144144 144147 144149 6,00 X 1500 X 6,00 X 1800 X 6,00 X 2000 X 6,00 X 2000 X 6,00 X 2000 X 6,00 X 2500 X 6,00 X 2500 X 6000 MM 6000 MM 5000 MM 6000 MM 8000 MM 6000 MM 8000 MM 432.00 518.00 480.00 576.00 768.00 720.00 960.00 144157 6,50 X 2500 X 8000 MM 1040.00 144164 144166 144168 7,00 X 2000 X 6000 MM 7,00 X 2500 X 6000 MM 7,00 X 2500 X 8000 MM 672.00 840.00 1120.00 144183 7,50 X 2500 X 8000 MM 1200.00 144205 144230 144240 144260 144264 144270 8,00 X 1500 X 6000 MM 8,00 X 2000 X 6000 MM 8,00 X 2000 X 8000 MM 8,00 X 2500 X 6000 MM 8,00 X 2500 X 8000 MM 8,00 X 2500 X 12000 MM 576.00 768.00 1024.00 960.00 1280.00 1920.00 144295 144296 144298 144305 144308 9,00 X 2000 X 6000 MM 9,00 X 2000 X 8000 MM 9,00 X 2500 X 6000 MM 9,00 X 2500 X 8000 MM 9,00 X 2500 X 12000 MM 864.00 1152.00 1080.00 1440.00 2160.00 144327 9,50 X 2500 X 8000 MM 1520.00 144365 144377 144380 144383 144386 144390 10,00 X 1500 X 6000 MM 10,00 X 2000 X 6000 MM 10,00 X 2000 X 8000 MM 10,00 X 2500 X 6000 MM 10,00 X 2500 X 8000 MM 10,00 X 2500 X 12000 MM 720.00 960.00 1280.00 1200.00 1600.00 2400.00 144401 144402 144404 11,00 X 2000 X 6000 MM 11,00 X 2000 X 8000 MM 11,00 X 2500 X 8000 MM 1056.00 1408.00 1760.00 144425 144431 144434 144437 144440 144444 12,00 X 1500 X 6000 MM 12,00 X 2000 X 6000 MM 12,00 X 2000 X 8000 MM 12,00 X 2500 X 6000 MM 12,00 X 2500 X 8000 MM 12,00 X 2500 X 12000 MM 864.00 1152.00 1536.00 1440.00 1920.00 2880.00 144453 12,50 X 2500 X 8000 MM 2000.00 4 Article no. Dimension Kg/plate 144456 144457 144459 144461 13,00 X 2000 X 6000 MM 13,00 X 2000 X 8000 MM 13,00 X 2500 X 8000 MM 13,00 X 2500 X 12000 MM 1248.00 1664.00 2080.00 3120.00 144468 144469 144471 14,00 X 2000 X 6000 MM 14,00 X 2000 X 8000 MM 14,00 X 2500 X 8000 MM 1344.00 1792.00 2240.00 144486 144492 144498 144499 144501 144506 15,00 X 1500 X 3000 MM 15,00 X 1500 X 6000 MM 15,00 X 2000 X 6000 MM 15,00 X 2000 X 8000 MM 15,00 X 2500 X 8000 MM 15,00 X 2500 X 12000 MM 540.00 1080.00 1440.00 1920.00 2400.00 3600.00 144529 144535 144540 16,00 X 2000 X 6000 MM 16,00 X 2500 X 8000 MM 16,00 X 2500 X 12000 MM 1536.00 2560.00 3840.00 144547 144550 144552 18,00 X 2000 X 6000 MM 18,00 X 2500 X 8000 MM 18,00 X 2500 X 12000 MM 1728.00 2880.00 4320.00 144562 144565 144568 144571 144580 144583 144586 144589 144591 20,00 X 1000 X 2000 MM 20,00 X 1250 X 2500 MM 20,00 X 1500 X 3000 MM 20,00 X 1500 X 6000 MM 20,00 X 2000 X 6000 MM 20,00 X 2000 X 8000 MM 20,00 X 2500 X 6000 MM 20,00 X 2500 X 8000 MM 20,00 X 2500 X 12000 MM 320.00 500.00 720.00 1440.00 1920.00 2560.00 2400.00 3200.00 4800.00 144601 22,00 X 2500 X 8000 MM 3520.00 144607 144613 144616 144619 144622 144626 25,00 X 1250 X 2500 MM 25,00 X 1500 X 6000 MM 25,00 X 2000 X 6000 MM 25,00 X 2000 X 8000 MM 25,00 X 2500 X 8000 MM 25,00 X 2500 X 12000 MM 625.00 1800.00 2400.00 3200.00 4000.00 6000.00 144631 144637 144640 144649 30,00 X 1250 X 30,00 X 1500 X 30,00 X 2000 X 30,00 X 2500 X 2500 MM 6000 MM 6000 MM 8000 MM 750.00 2160.00 2880.00 4800.00 144673 144679 35,00 X 2000 X 6000 MM 35,00 X 2500 X 8000 MM 3360.00 5600.00 144685 144688 144694 144703 40,00 X 1250 X 40,00 X 1500 X 40,00 X 2000 X 40,00 X 2500 X 2500 MM 3000 MM 6000 MM 8000 MM 1000.00 1440.00 3840.00 6400.00 144712 144713 45,00 X 2000 X 6000 MM 45,00 X 2500 X 8000 MM 4320.00 7200.00 144715 144730 144736 50,00 X 1000 X 2000 MM 50,00 X 2000 X 6000 MM 50,00 X 2500 X 8000 MM 800.00 4800.00 8000.00 144748 60,00 X 2000 X 6000 MM 5760.00 www.norskstaal.no STEEL Article no. Dimension Kg/plate 144761 65,00 X 2000 X 6000 MM 6240.00 144773 70,00 X 2000 X 6000 MM 6720.00 144787 144792 80,00 X 1500 X 3000 MM 80,00 X 2000 X 6000 MM 2880.00 7680.00 Steel plates for pressure purposes P265GH Article no. ARTICLE GROUP 140 Dimension Kg/plate 140004 6,00 X 2000 X 6000 MM 576.00 140014 8,00 X 2000 X 6000 MM 768.00 140032 10,00 X 2000 X 6000 MM 960.00 140048 28,00 X 2500 X 4000 MM 2240.00 Steel plates for pressure purposes P355NL2 Acc. to EN 10 028. Impact tested at -50 degr.C Tolerances acc. to NS-EN 10 029 Class C Inspection certificate acc. to EN 10 204 3.2-DNV Chargenumber stamped in the material. White circle around chargenumber ARTICLE GROUP 148 Article no. Acc. to EN 10 025-2 Carbonequivalent (CEV) to be stated in the certificate Tolerances and flatnes acc. to EN 10 029, Class A Inspection certificate acc. to EN 10 204-3.1 for thicknesses under 50 mm. Inspection certificate acc. to EN 10 204 3.2-DNV for thicknesses over 50 mm Chargenumber stamped in the material. White circle around chargenumber ARTICLE GROUP 150 Acc. to EN 10 028-2 ASME 516 GR. 60/ ASME SEC- 2 part A. ADWI, TRB 100. Proof stress tested Rp 0,2 acc. to EN 10 002 at 300 degr.C Tolerances and flatness acc. to EN 10 029 Class C Inspection certificate acc. to 10 204 3.2-DNV Chargenumber stamped in the material. White circle around chargenumber Article no. Steel plates S355J2+N Dimension Kg/plate 148040 8,00 X 2500 X 8000 MM 1312.00 148060 10,00 X 2500 X 8000 MM 1640.00 148080 12,00 X 2500 X 8000 MM 1968.00 148100 15,00 X 2500 X 8000 MM 2460.00 148120 20,00 X 2500 X 8000 MM 3280.00 Dimension Kg/plate 150015 150020 150030 150040 150045 150050 150055 150065 3,00 X 1250 X 2500 MM 4,00 X 1250 X 2500 MM 5,00 X 1250 X 2500 MM 5,00 X 2000 X 6000 MM 6,00 X 1000 X 2000 MM 6,00 X 1250 X 2500 MM 6,00 X 1500 X 3000 MM 6,00 X 2000 X 6000 MM 75.00 100.00 125.00 480.00 96.00 150.00 216.00 576.00 150080 150085 150090 150100 150105 150110 8,00 X 1000 X 2000 MM 8,00 X 1250 X 2500 MM 8,00 X 1500 X 3000 MM 8,00 X 2000 X 6000 MM 8,00 X 2500 X 6000 MM 8,00 X 2500 X 8000 MM 128.00 200.00 288.00 768.00 960.00 1280.00 150125 150130 150135 150150 150155 150160 10,00 X 1000 X 2000 MM 10,00 X 1250 X 2500 MM 10,00 X 1500 X 3000 MM 10,00 X 2000 X 6000 MM 10,00 X 2500 X 6000 MM 10,00 X 2500 X 8000 MM 160.00 250.00 360.00 960.00 1200.00 1600.00 150165 150170 150175 150190 150195 150200 12,00 X 1000 X 2000 MM 12,00 X 1250 X 2500 MM 12,00 X 1500 X 3000 MM 12,00 X 2000 X 6000 MM 12,00 X 2500 X 6000 MM 12,00 X 2500 X 8000 MM 192.00 300.00 432.00 1152.00 1440.00 1920.00 150235 150240 150250 150255 150260 15,00 X 1250 X 2500 MM 15,00 X 1500 X 3000 MM 15,00 X 2000 X 6000 MM 15,00 X 2500 X 6000 MM 15,00 X 2500 X 8000 MM 375.00 540.00 1440.00 1800.00 2400.00 150270 150285 16,00 X 1250 X 2500 MM 16,00 X 2500 X 8000 MM 400.00 2560.00 150320 150325 150330 150340 150345 150350 20,00 X 1000 X 2000 MM 20,00 X 1250 X 2500 MM 20,00 X 1500 X 3000 MM 20,00 X 2000 X 6000 MM 20,00 X 2500 X 6000 MM 20,00 X 2500 X 8000 MM 320.00 500.00 720.00 1920.00 2400.00 3200.00 www.norskstaal.no 5 Article no. STEEL Dimension Kg/plate 150405 150410 150420 150430 150470 150475 150485 150490 25,00 X 1250 X 2500 MM 25,00 X 1500 X 3000 MM 25,00 X 2000 X 6000 MM 25,00 X 2500 X 8000 MM 30,00 X 1250 X 2500 MM 30,00 X 1500 X 3000 MM 30,00 X 2000 X 6000 MM 30,00 X 2500 X 8000 MM 625.00 900.00 2400.00 4000.00 750.00 1080.00 2880.00 4800.00 150512 35,00 X 1500 X 3000 MM 1260.00 150550 150555 150565 150570 40,00 X 1250 X 2500 MM 40,00 X 1500 X 3000 MM 40,00 X 2000 X 6000 MM 40,00 X 2500 X 8000 MM 1000.00 1440.00 3840.00 6400.00 150575 45,00 X 1500 X 3000 MM 1620.00 150600 150610 150617 150620 50,00 X 1500 X 3000 MM 50,00 X 2000 X 6000 MM 50,00 X 2500 X 5000 MM 50,00 X 2500 X 8000 MM 1800.00 4800.00 5000.00 8000.00 150650 150655 150657 60,00 X 1500 X 3000 MM 60,00 X 2000 X 6000 MM 60,00 X 2200 X 5100 MM 2160.00 5760.00 5386.00 150660 65,00 X 1500 X 3000 MM 2340.00 150690 150700 70,00 X 1500 X 3000 MM 70,00 X 2000 X 6000 MM 2520.00 6720.00 150730 150735 150737 80,00 X 1500 X 3000 MM 80,00 X 2000 X 6000 MM 80,00 X 2500 X 5000 MM 2880.00 7680.00 8000.00 150745 90,00 X 2000 X 6000 MM 8640.00 150750 150754 100,00 X 1500 X 3000 MM 100,00 X 2000 X 6000 MM 3600.00 9600.00 150756 110,00 X 2000 X 5000 MM 8800.00 150762 115,00 X 2000 X 5000 MM 9200.00 150766 120,00 X 2000 X 5000 MM 9600.00 150774 125,00 X 2000 X 5000 MM 10000.00 150805 150810 130,00 X 1250 X 2500 MM 130,00 X 2000 X 4000 MM 3250.00 8320.00 150820 150824 140,00 X 1250 X 2500 MM 140,00 X 2000 X 4000 MM 3500.00 8960.00 150830 150836 150,00 X 1250 X 2500 MM 150,00 X 2000 X 4000 MM 3750.00 9600.00 150845 170,00 X 2000 X 3000 MM 8160.00 150850 150855 200,00 X 1250 X 2500 MM 200,00 X 2000 X 3000 MM 5000.00 9600.00 6 www.norskstaal.no STEEL Steel plates NVE 36 Article no. Acc. to DNV Offshore Codes, Classification of Offshore Units Jan. 2001 and Rules for Classification of ships Jan. 2005 Modified C max 0,16 CEV max 0,42 or by agreement max CEV 0,41 Impact tested at -40 degr.C min. 50 Joule/longtested Thickness tolerances EN 10 029 Class B Remaining tolerances acc. to DNV-rules Inspection certificate acc. to EN 10 204 3.2-DNV Chargenumber stamped in the material. White circle around chargenumber 146082 146084 146085 146086 30,00 X 1500 X 6000 MM 30,00 X 2000 X 6000 MM 30,00 X 2500 X 8000 MM 30,00 X 3000 X 12000 MM 2160.00 2880.00 4800.00 8640.00 146090 146091 35,00 X 2000 X 6000 MM 35,00 X 2500 X 8000 MM 3360.00 5600.00 146095 146105 40,00 X 2000 X 6000 MM 40,00 X 2500 X 8000 MM 3840.00 6400.00 146106 146108 45,00 X 2500 X 8000 MM 45,00 X 2000 X 6000 MM 7200.00 4320.00 146115 146121 50,00 X 2000 X 6000 MM 50,00 X 2500 X 8000 MM 4800.00 8000.00 ARTICLE GROUP 146 Article no. Dimension Kg/plate Dimension Kg/plate 146002 146003 6,00 X 2000 X 6000 MM 6,00 X 2500 X 8000 MM 576.00 960.00 146130 146132 60,00 X 2000 X 6000 MM 60,00 X 2500 X 8000 MM 5760.00 9600.00 146005 7,00 X 2500 X 8000 MM 1120.00 146140 65,00 X 2000 X 6000 MM 6240.00 146006 146007 146009 8,00 X 2000 X 6000 MM 8,00 X 2500 X 8000 MM 8,00 X 2500 X 12000 MM 768.00 1280.00 1920.00 146148 70,00 X 2000 X 6000 MM 6720.00 146156 75,00 X 2000 X 6000 MM 7200.00 146011 9,00 X 2500 X 8000 MM 1440.00 146162 80,00 X 2000 X 6000 MM 7680.00 146008 146010 146012 146013 10,00 X 2000 X 6000 MM 10,00 X 2500 X 8000 MM 10,00 X 2500 X 12000 MM 10,00 X 3000 X 12000 MM 960.00 1600.00 2400.00 2880.00 146170 90,00 X 2000 X 6000 MM 8640.00 146190 100,00 X 2000 X 6000 MM 9600.00 146014 11,00 X 2500 X 8000 MM 1760.00 146015 146022 146023 146024 12,00 X 2000 X 6000 MM 12,00 X 2500 X 8000 MM 12,00 X 2500 X 12000 MM 12,00 X 3000 X 12000 MM 1152.00 1920.00 2880.00 3456.00 146025 13,00 X 2500 X 8000 MM 2080.00 146027 146028 146029 146030 15,00 X 2500 X 12000 MM 15,00 X 3000 X 12000 MM 15,00 X 2000 X 6000 MM 15,00 X 2500 X 8000 MM 3600.00 4320.00 1440.00 2400.00 146031 146032 16,00 X 2000 X 6000 MM 16,00 X 2500 X 8000 MM 1536.00 2560.00 146035 18,00 X 2500 X 8000 MM 2880.00 146045 146055 146057 146058 20,00 X 2000 X 6000 MM 20,00 X 2500 X 8000 MM 20,00 X 2500 X 12000 MM 20,00 X 3000 X 12000 MM 1920.00 3200.00 4800.00 5760.00 146061 22,00 X 2500 X 8000 MM 3520.00 146065 146075 146077 146078 25,00 X 2000 X 6000 MM 25,00 X 2500 X 8000 MM 25,00 X 2500 X 12000 MM 25,00 X 3000 X 12000 MM 2400.00 4000.00 6000.00 7200.00 www.norskstaal.no 7 STEEL Steel plates S355G10 + N/M Article no. NORSOK M-120 rev. 5, Z35 for thicknesses ≥ 25 mm MDS Y20 Rev. 5 and acc. to EN 10 225 Tolerances and flatness acc. to EN 10 029 Inspection certificate acc. to EN 10 204-3.2 DNV/Lloyds Chargenumber stamped in both ends. White circle around chargenumber. ARTICLE GROUP 189 Article no. 189007 189011 189014 189017 189018 189027 189037 189047 189050 189057 189066 189075 189080 189090 189110 189120 189130 189131 189140 189150 189160 189220 Dimension 8,00 X 2500 X 8000 MM 10,00 X 2500 X 12000 MM 12,00 X 2500 X 12000 MM 15,00 X 2500 X 12000 MM 16,00 X 2500 X 12000 MM 20,00 X 2500 X 12000 MM 25,00 X 2500 X 12000 MM 30,00 X 2500 X 12000 MM 35,00 X 2500 X 12000 MM 40,00 X 2500 X 12000 MM 50,00 X 2500 X 8000 MM 60,00 X 2000 X 6000 MM 70,00 X 2000 X 6000 MM 80,00 X 2000 X 6000 MM 100,00 X 2000 X 4000 MM 110,00 X 2000 X 4000 MM 120,00 X 2000 X 4000 MM 120,00 X 2000 X 5000 MM 130,00 X 2000 X 4000 MM 140,00 X 2000 X 4000 MM 150,00 X 2000 X 4000 MM 200,00 X 2000 X 3000 MM Kg/plate 1280.00 2400.00 2880.00 3600.00 3840.00 4800.00 6000.00 7200.00 8400.00 9600.00 8000.00 5760.00 6720.00 7680.00 6400.00 7040.00 7680.00 9600.00 8320.00 8960.00 9600.00 9600.00 Steel plates DOMEX S355MCD/E Lazerplates Pickled and lightly oiled High yield strength steel acc. to EN 10 149-2 Uniqe properties regarding cold forming, tight bend radius and suitable for lazer cutting Re min. 355N/mm2, Impact tested at -20 gr. C Tolerances and flatness acc. to EN 10 051 Inspection certificate acc. to EN 10 204-3.1 Quality marked along one side Delivered as single sheets or in approx. 2000 kgs envelopes ARTICLE GROUP 128 Article no. Dimension Kg/plate 128020 128022 128025 2,00 X 1000 X 2000 MM 2,00 X 1250 X 2500 MM 2,50 X 1250 X 2500 MM 32.00 50.00 62.50 128030 128035 3,00 X 1250 X 2500 MM 3,00 X 1500 X 3000 MM 75.00 108.00 128040 4,00 X 1000 X 2000 MM 64.00 8 Dimension Kg/plate 128045 128048 4,00 X 1250 X 2500 MM 5,00 X 1000 X 2000 MM 100.00 80.00 128058 128062 6,00 X 1000 X 2000 MM 6,00 X 1500 X 3000 MM 96.00 216.00 128078 128082 8,00 X 1000 X 2000 MM 8,00 X 1500 X 3000 MM 128.00 288.00 128092 10,00 X 1500 X 3000 MM 360.00 128102 12,00 X 1500 X 3000 MM 432.00 Steel plates DOMEX S355MCD/E/B Lazerplates High yield strength steel acc. to EN 10 149 -2 Uniqe properties regarding cold forming, tight bend radius and suitable for lazer cutting Re min. 355N/mm2 Impact tested: MCE -40 gr. C, MCD -20 gr. C, MCB without testing Tolerances and flatness acc. to EN 10 051 Inspection certificate acc. to EN 10 204-3.1 Quality marked along one side ARTICLE GROUP 151 Article no. Dimension Kg/plate 151015 151017 3,00 X 1250 X 2500 MM MCE 3,00 X 1500 X 3000 MM MCE 75.00 108.00 151020 151023 4,00 X 1250 X 2500 MM MCE 4,00 X 1500 X 3000 MM MCE 100.00 144.00 151025 151030 151033 5,00 X 1000 X 2000 MM MCE 5,00 X 1250 X 2500 MM MCE 5,00 X 1500 X 3000 MM MCE 80.00 125.00 180.00 151045 151050 151055 6,00 X 1000 X 2000 MM MCE 6,00 X 1250 X 2500 MM MCE 6,00 X 1500 X 3000 MM MCE 96.00 150.00 216.00 151080 151085 151090 8,00 X 1000 X 2000 MM MCE 8,00 X 1250 X 2500 MM MCE 8,00 X 1500 X 3000 MM MCE 128.00 200.00 288.00 151125 151130 151135 10,00 X 1000 X 2000 MM MCE 10,00 X 1250 X 2500 MM MCE 10,00 X 1500 X 3000 MM MCE 160.00 250.00 360.00 151165 151170 151175 12,00 X 1000 X 2000 MM MCD 12,00 X 1250 X 2500 MM MCD 12,00 X 1500 X 3000 MM MCD 192.00 300.00 432.00 151180 151185 15,00 X 1250 X 2500 MM MCB 15,00 X 1500 X 3000 MM MCB 375.00 540.00 www.norskstaal.no STEEL Steel plates DOMEX S500MCD Lazerplates Steel plates DOMEX S700MCD Lazerplates Pickled and lightly oiled High yield strength steel acc. to EN 10 149-2 Uniqe properties regarding cold forming, tight bend radius and suitbale for lazer cutting Re min. 500N/mm2, Impact tested at -20 degr.C Tolerances and flatness acc. to EN 10 051 Inspection certificate acc. to EN 10 204-3.1 Quality marked along one side Delivered as single sheets or in approx. 2000 kgs envelopes High yield strength steel acc. to EN 10 149-2 Uniqe properties regarding cold forming, tight bend radius and suitbale for lazer cutting Re min. 650N/mm2, Impact tested at -20 degr.C Tolerances and flatness acc. to EN 10 051 Inspection certificate acc. to EN 10 204-3.1 Quality marked along one side Delivered as single sheets or in approx. 2000 kgs envelopes ARTICLE GROUP 175 ARTICLE GROUP 173 Article no. Dimension Kg/plate 173012 3 X 1250 X 2500 MM 75.00 173022 4 X 1500 X 3000 MM 144.00 173035 5 X 1500 X 3000 MM 180.00 173052 6 X 1500 X 3000 MM 216.00 173062 8 X 1500 X 3000 MM 288.00 173102 10 X 1500 X 3000 MM 360.00 Steel plates DOMEX S650MCD Lazerplates Article no. 175018 175040 175050 Dimension Kg/plate 4 X 1000 X 2000 MM 6 X 1000 X 2000 MM 6 X 1500 X 5000 MM 64.00 96.00 360.00 Steel plates DOMEX 355W (COR-TEN A / S355J2WP) Acc. to EN 10 025-5 Structural steel with improved atmospheric corrosion resistance Tolerances and flatness acc. to EN 10 051 Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 164 Article no. High yield strength steel acc. to EN 10 149-2 Uniqe properties regarding cold forming, tight bend radius and suitbale for lazer cutting Re min. 650N/mm2, Impact tested at -20 degr.C Tolerances and flatness acc. to EN 10 051 Inspection certificate acc. to EN 10 204-3.1 Quality marked along one side Delivered as single sheets or in approx. 2000 kgs envelopes 164022 164024 164038 164057 164064 164070 164080 164085 Dimension Kg/plate 3,00 X 1250 X 2500 MM 3,00 X 1500 X 3000 MM 4,00 X 1500 X 3000 MM 5,00 X 1500 X 3000 MM 5,00 X 1500 X 5000 MM 6,00 X 1500 X 5000 MM 8,00 X 1500 X 3000 MM 10,00 X 1500 X 3000 MM 75.00 108.00 144.00 180.00 300.00 360.00 288.00 360.00 ARTICLE GROUP 174 Article no. Dimension Kg/plate 174025 3,00 X 1250 X 2500 MM 75.00 174040 174045 4,00 X 1250 X 2500 MM 4,00 X 1500 X 5000 MM 100.00 240.00 174050 174052 5,00 X 1250 X 2500 MM 5,00 X 1500 X 5000 MM 125.00 300.00 174054 174055 174056 6,00 X 1250 X 2500 MM 6,00 X 1500 X 3000 MM 6,00 X 1500 X 5000 MM 150.00 216.00 360.00 174057 174060 8,00 X 1250 X 2500 MM 8,00 X 1500 X 5000 MM 200.00 480.00 www.norskstaal.no 9 STEEL Steel plates S420G2 + M/Q Steel plates WELDOX 700E/S690QL NORSOK M-120 Rev. 5, MDS Y-30 Rev. 5 and acc. to EN 10 225 Z 35 for thicknesses ≥ 25 mm For thicknesses over 100 mm, the plates are only delivered Q (quenced and tempered) Tolerances and flatness acc. to EN 10 029 Inspection certificate acc. to EN 10 204-3.2 DNV/Lloyds Chargenumber stamped in both ends White circle painted around chargenumber Extra high strength structural steel, quenched and tempered acc. to EN 10 025-6 Impact tested at -40 gr.C. Tolerances: thickness acc. to EN 10 029 class A or with more narrow tolerances (AccuRollTech) Tolerances and flatness acc. to EN 10 029 class N Inspection certificare acc. to EN 10 204-3.2-DNV Shot blasted and primed on both sides with redbrown primer Chargenumber stamped in the material. White circle around chargenumber ARTICLE GROUP 191 Dimension Kg/plate ARTICLE GROUP 171 191085 8,00 X 2500 X 10000 MM 1600.00 Article no. 191100 10,00 X 2500 X 12000 MM 2400.00 191110 12,00 X 2500 X 12000 MM 2880.00 191150 15,00 X 2500 X 12000 MM 3600.00 191160 16,00 X 2500 X 12000 MM 3840.00 191200 20,00 X 2500 X 12000 MM 4800.00 191250 25,00 X 2500 X 12000 MM 6000.00 191300 30,00 X 2500 X 12000 MM 7200.00 191350 35,00 X 2500 X 12000 MM 8400.00 191405 40,00 X 2500 X 12000 MM 9600.00 191450 45,00 X 2500 X 8000 MM 7200.00 191500 50,00 X 2500 X 8000 MM 8000.00 191550 55,00 X 2500 X 8000 MM 8800.00 191600 60,00 X 2500 X 6000 MM 7200.00 191700 70,00 X 2500 X 6000 MM 8400.00 191800 80,00 X 2500 X 6000 MM 9600.00 191890 90,00 X 2500 X 6000 MM 10800.00 191900 100,00 X 2500 X 6000 MM 12000.00 191920 120,00 X 2000 X 4000 MM 7680.00 191930 130,00 X 2000 X 4000 MM 8320.00 191940 140,00 X 2000 X 4000 MM 8960.00 191950 150,00 X 2000 X 4000 MM 9600.00 Article no. 10 Dimension Kg/plate 171135 171136 171140 6,00 X 1500 X 2500 MM 6,00 X 1500 X 3000 MM 6,00 X 2500 X 6000 MM 180.00 216.00 720.00 171155 171160 8,00 X 1500 X 2500 MM 8,00 X 2500 X 6000 MM 240.00 960.00 171165 171174 171175 171177 10,00 X 1500 X 2500 MM 10,00 X 2500 X 4000 MM 10,00 X 2500 X 6000 MM 10,00 X 2500 X 8000 MM 300.00 800.00 1200.00 1600.00 171180 171182 171186 171187 171190 171192 171194 171196 171198 171201 12,00 X 1500 X 2500 MM 12,00 X 1500 X 5000 MM 12,00 X 2000 X 6000 MM 12,00 X 2000 X 7000 MM 12,00 X 2500 X 6000 MM 12,00 X 2500 X 7000 MM 12,00 X 2500 X 8000 MM 15,00 X 2000 X 8000 MM 15,00 X 2500 X 6000 MM 15,00 X 2500 X 8000 MM 360.00 720.00 1152.00 1344.00 1440.00 1680.00 1920.00 1920.00 1800.00 2400.00 171203 171206 171210 171212 16,00 X 1500 X 2500 MM 16,00 X 2000 X 6000 MM 16,00 X 2500 X 6000 MM 16,00 X 2500 X 8000 MM 480.00 1536.00 1920.00 2560.00 171215 171219 171220 171222 20,00 X 1500 X 2500 MM 20,00 X 2500 X 4000 MM 20,00 X 2500 X 6000 MM 20,00 X 2500 X 8000 MM 600.00 1600.00 2400.00 3200.00 171225 171230 171245 25,00 X 1500 X 2500 MM 25,00 X 1500 X 5000 MM 25,00 X 2500 X 6000 MM 750.00 1500.00 3000.00 171260 171275 30,00 X 1500 X 2500 MM 30,00 X 2500 X 6000 MM 900.00 3600.00 171290 171305 40,00 X 1500 X 2500 MM 40,00 X 2500 X 6000 MM 1200.00 4800.00 171320 171332 50,00 X 1500 X 2500 MM 50,00 X 2500 X 6000 MM 1500.00 6000.00 171350 60,00 X 1500 X 2500 MM 1800.00 www.norskstaal.no STEEL Article no. Dimension Kg/plate Article no. Dimension Kg/plate 171355 171360 60,00 X 2000 X 4000 MM 60,00 X 2500 X 6000 MM 3840.00 7200.00 166165 166168 25,00 X 1500 X 2500 MM 25,00 X 2500 X 6000 MM 750.00 3000.00 171365 171370 70,00 X 1500 X 2500 MM 70,00 X 2500 X 6000 MM 2100.00 8400.00 166195 166198 166200 30,00 X 1500 X 2500 MM 30,00 X 2500 X 6000 MM 30,00 X 2500 X 7000 MM 900.00 3600.00 4200.00 171375 171380 80,00 X 2000 X 4000 MM 80,00 X 2500 X 6000 MM 5120.00 9600.00 166215 166218 40,00 X 1500 X 2500 MM 40,00 X 2500 X 6000 MM 1200.00 4800.00 171390 90,00 X 2000 X 4000 MM 5760.00 171400 100,00 X 2000 X 4000 MM 6400.00 166230 45,00 X 2000 X 4000 MM 2880.00 171410 110,00 X 2000 X 4000 MM 7040.00 166248 166250 50,00 X 1500 X 2500 MM 50,00 X 2500 X 6000 MM 1500.00 6000.00 171420 120,00 X 2000 X 4000 MM 7680.00 166262 60,00 X 2000 X 4000 MM 3840.00 166265 63,00 X 1500 X 8200 MM 6199.00 166272 70,00 X 2000 X 4000 MM 4480.00 Abrasion resistant steel plates Hardox 450 Well suited for welding Brinell hardness: approx. 450 HB (425-475 HB) Thickness tolerances acc. to EN 10 029 class A or with more narrow tolerances (AccuRollTech™) Tolerances and flatness acc. to EN 10 029 class N Inspection certificate acc. to EN 10 204-3.1 Shot blasted and primed on both sides with redbrown primer Chargenumber stamped in the material. White circle around chargenumber One side of plate marked HARDOX 450 For article number 166262 and 166272 we reserve the right to stock Hardox 450 and/or Hardox 400 ARTICLE GROUP 166 Article no. Abrasion resistant steel plates Hardox 500 Well suited for welding Brinell hardness: 470-530 HB 4-26 mm 450-540 HB 26,1 - 80 mm Thickness tolerances acc. to EN 10 029 class A or with more narrow tolerances (AccuRollTech™) Tolerances and flatness acc. to EN 10 029 class N Inspection certificate acc. to EN 10 204-3.1 Shot blasted and primed on both sides with redbrown primer. Chargenumber stamped in the material. White circle around chargenumber ARTICLE GROUP 168 Dimension Kg/plate 166040 4,00 X 2500 X 6000 MM 480.00 Article no. 166050 5,00 X 2500 X 6000 MM 600.00 166055 166060 6,00 X 1500 X 2500 MM 6,00 X 2500 X 6000 MM 180.00 720.00 166070 166078 8,00 X 1500 X 2500 MM 8,00 X 2500 X 6000 MM 240.00 960.00 166090 166100 166110 10,00 X 1500 X 2500 MM 10,00 X 2500 X 6000 MM 10,00 X 2500 X 7000 MM 300.00 1200.00 1400.00 166112 166118 166120 166128 12,00 X 1500 X 2500 MM 12,00 X 2500 X 6000 MM 12,00 X 2500 X 7000 MM 15,00 X 2500 X 6000 MM 360.00 1440.00 1680.00 1800.00 166135 166138 16,00 X 1500 X 2500 MM 16,00 X 2500 X 6000 MM 480.00 1920.00 166145 166148 20,00 X 1500 X 2500 MM 20,00 X 2500 X 6000 MM 600.00 2400.00 Dimension Kg/plate 168010 10,00 X 1500 X 3000 MM 360.00 168012 12,00 X 1500 X 2500 MM 360.00 168030 16,00 X 1500 X 3000 MM 576.00 168050 20,00 X 1500 X 3000 MM 720.00 168060 168073 25,00 X 1500 X 3000 MM 25,00 X 2500 X 6000 MM 900.00 3000.00 168081 30,00 X 2500 X 6000 MM 3600.00 168085 168088 40,00 X 1500 X 3000 MM 40,00 X 2500 X 6400 MM 1440.00 5120.00 168090 168100 50,00 X 1500 X 3000 MM 50,00 X 2000 X 4000 MM 1800.00 3200.00 168130 60,00 X 2000 X 4000 MM 3840.00 www.norskstaal.no 11 STEEL Steel Checker plates S235JR Acc. to EN 10 025-2 Delivered with standard checkered pattern Tolerances acc. to EN 10 051 Test report acc. to EN 10 204-2.2 ARTICLE GROUP 152 Article no. 152003 152005 Dimension 3,00 X 1000 X 2000 MM 3,00 X 1250 X 2500 MM Kg/plate 60.00 94.00 Steel Tear plates S235JR Acc. to EN 10 025-2 Delivered with standard teardrop pattern Tolerances acc. to EN 10 051 Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 153 Article no. Dimension Kg/plate 153140 153150 5,00 X 1000 X 2000 MM 5,00 X 1250 X 2500 MM 84.00 131.00 153200 153210 6,00 X 1000 X 2000 MM 6,00 X 1250 X 2500 MM 102.00 159.00 Steel Tear plates NVA Thickness tolerances acc. to DNV-rules Remaining tolerances and flatnes acc. to EN 10 029 Klasse B Inspection certificate acc. to EN 10 204-3.2 DNV Chargenumber stamped in the material ARTICLE GROUP 155 Article no. Dimension Kg/plate 155140 155150 155180 155190 155192 5,00 X 1000 X 2000 MM 5,00 X 1250 X 2500 MM 5,00 X 1500 X 6000 MM 5,00 X 2000 X 6000 MM 5,00 X 2500 X 5000 MM 84.00 131.00 378.00 504.00 524.00 155200 155210 155240 155260 155262 6,00 X 1000 X 2000 MM 6,00 X 1250 X 2500 MM 6,00 X 1500 X 6000 MM 6,00 X 2000 X 6000 MM 6,00 X 2500 X 5000 MM 102.00 159.00 459.00 612.00 636.00 155290 155310 155320 8,00 X 1500 X 6000 MM 8,00 X 2000 X 6000 MM 8,00 X 2500 X 8000 MM 603.00 804.00 1340.00 155350 155360 155370 155380 10,00 X 1500 X 6000 MM 10,00 X 2000 X 6000 MM 10,00 X 2500 X 8000 MM 12,00 X 2000 X 6000 MM 747.00 996.00 1660.00 1188.00 12 www.norskstaal.no STEEL Steel rounds S235JR Steel rounds/shafts S355J2+N Acc. to EN 10 025-2 Tolerances acc. to EN 10 060 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.1 (XM/M520/IM) acc. to EN 10 025-2 Tolerances acc. to EN 10 060 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.2-DNV Impact tested at - 20 degrees C, min 27 J Chargenumber and DNV stamped on the ends of rounds/shafts ARTICLE GROUP 19 Article no. Dimension Kg/m Lengths (m) 19018 6 MM X Ø 0.23 6 19030 8 MM X Ø 0.40 6 19040 10 MM X Ø 0.63 6 19045 12 MM X Ø 0.91 6 19050 16 MM X Ø 1.61 6 19055 19060 19065 20 MM X Ø 22 MM X Ø 25 MM X Ø 2.51 3.04 3.93 6 6 6 19070 19075 19080 30 MM X Ø 32 MM X Ø 35 MM X Ø 5.66 6.44 7.70 6 6 6 19090 40 MM X Ø 10.10 6 19148 50 MM X Ø 15.70 6 Steel rounds NVA Tolerances acc. to EN 10 060 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.2-DNV ARTICLE GROUP 1 Article no. Dimension Kg/m Lengths (m) 1064 16 MM X Ø 1.61 6 1071 19 MM X Ø 2.27 6 1078 1085 1092 20 MM X Ø 22 MM X Ø 25 MM X Ø 2.51 3.04 3.93 6 6 6 1109 30 MM X Ø 5.66 6 1148 50 MM X Ø 15.70 6 1183 75 MM X Ø 35.40 6 1185 80 MM X Ø 40.20 6 ARTICLE GROUP 73 Article no. Dimension Kg/m 73070 73075 70 MM X Ø 75 MM X Ø 30.80 35.40 6 6 7.5 7.5 73080 73085 80 MM X Ø 85 MM X Ø 40.20 45.40 6 6 7.5 7.5 73090 90 MM X Ø 50.90 6 7.5 73100 73105 73110 73115 100 MM X Ø 105 MM X Ø 110 MM X Ø 115 MM X Ø 62.90 69.30 76.10 83.10 6 6 6 6 7.5 7.5 7.5 7.5 73120 73125 120 MM X Ø 125 MM X Ø 90.50 98.20 6 6 7.5 7.5 73130 130 MM X Ø 106.00 6 7.5 73140 140 MM X Ø 123.00 6 7.5 73150 150 MM X Ø 141.00 6 7.5 73160 160 MM X Ø 161.00 6 7.5 73170 170 MM X Ø 182.00 6 7.5 73180 180 MM X Ø 204.00 6 7.5 73190 190 MM X Ø 227.00 6 7.5 73200 73210 73220 73230 73240 73250 73260 73280 73290 200 MM X Ø 210 MM X Ø 220 MM X Ø 230 MM X Ø 240 MM X Ø 250 MM X Ø 260 MM X Ø 280 MM X Ø 290 MM X Ø 251.00 277.00 304.00 333.00 362.00 385.30 425.00 493.00 532.00 6 6 6 6 6 6 6 6 6 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 73300 73320 73330 73350 300 MM X Ø 320 MM X Ø 330 MM X Ø 350 MM X Ø 566.00 648.00 684.00 770.00 6 6 6 6 7.5 7.5 7.5 7.5 www.norskstaal.no From (m)To (m) 13 STEEL Steel rounds S355JO Acc. to EN 10 025-2 Tolerances acc. to EN 10 060 Length tolerances +/-100 mm Impact tested at 0 degrees C, min 27 J Inspection certificate acc. to EN 10 204-3.1 Under 50 mm: chargenumber stamped on tags Above 50 mm chargenumber stamped on the end of rounds ARTICLE GROUP 72 Article no. Dimension Kg/m Lengths (m) 72016 16 MM X Ø 1.61 6 72020 72025 20 MM X Ø 25 MM X Ø 2.51 3.93 6 6 72030 72032 72035 72038 30 MM X Ø 32 MM X Ø 35 MM X Ø 38 MM X Ø 5.66 6.44 7.70 9.08 6 6 6 6 72040 72045 40 MM X Ø 45 MM X Ø 10.10 12.70 6 6 72050 72055 50 MM X Ø 55 MM X Ø 15.70 19.00 6 6 72060 72065 60 MM X Ø 65 MM X Ø 22.60 26.60 6 6 Article no. Dimension Kg/m From (m)To (m) 75070 75075 75080 70 MM X Ø 75 MM X Ø 80 MM X Ø 30.80 35.40 40.30 4 4 4 6 6 6 75090 90 MM X Ø 50.90 4 6 75100 75110 100 MM X Ø 110 MM X Ø 62.90 76.10 4 4 6 6 75120 75125 120 MM X Ø 125 MM X Ø 90.60 98.20 4 4 6 6 75130 130 MM X Ø 106.00 4 6 75140 140 MM X Ø 123.00 4 6 75150 150 MM X Ø 142.00 4 6 75160 160 MM X Ø 161.00 4 6 75180 180 MM X Ø 204.00 4 6 75200 200 MM X Ø 252.00 4 6 Steel half rounds NVA Tolerances acc. to DIN 1018 Length tolerances -0/+100 mm Inspection certificate acc. to EN 10 204-3.2-DNV ARTICLE GROUP 5 Steel rounds/shafts 34CrNiMo6 Article no. Dimension Kg/m Lengths (m) Acc. to EN 10 083-1 or acc. to SS2541-3 Quenched and tempered Impact tested at -20 gr.C Tolerances acc. to EN 10 060 Inspection certificate acc. to EN 10 204-3.1 5007 76 X 38 MM 18.23 6 5013 50 X 25 MM 7.85 6 5016 60 X 30 MM 11.30 6 ARTICLE GROUP 75 Article no. Dimension 75016 16 MM X Ø 1.61 3 3 75020 75025 20 MM X Ø 25 MM X Ø 2.52 3.93 4 4 6 6 75030 75032 75035 75038 30 MM X Ø 32 MM X Ø 35 MM X Ø 38 MM X Ø 5.66 6.44 7.70 9.08 4 4 4 4 6 6 6 6 75040 75045 40 MM X Ø 45 MM X Ø 10.10 12.80 4 4 75050 50 MM X Ø 15.70 75060 75065 60 MM X Ø 65 MM X Ø 22.60 26.50 14 Kg/m From (m)To (m) Steel squares S235JR Acc. to EN 10 025-2 Tolerances acc. to EN 10 059 Length tolerances +/-100 mm Test report acc. to EN 10 204-2.2 ARTICLE GROUP 2 Article no. Dimension 2010 6 MM X 4-KT 0.29 6 6 6 2025 8 MM X 4-KT 0.51 6 4 6 2030 10 MM X 4-KT 0.80 6 4 4 6 6 2040 12 MM X 4-KT 1.15 6 2047 16 MM X 4-KT 2.05 6 www.norskstaal.no Kg/m Lengths (m) Article no. STEEL Dimension Kg/m Lengths (m) 2050 2057 2064 20 MM X 4-KT 22 MM X 4-KT 25 MM X 4-KT 3.20 3.88 5.00 6 6 6 2069 30 MM X 4-KT 7.21 6 2078 40 MM X 4-KT 12.80 6 2092 50 MM X 4-KT 20.00 6 2099 60 MM X 4-KT 28.80 6 2134 100 MM X 4-KT 80.10 6 Steel flats S235JR Acc. to EN 10 025-2 Tolerances acc. to EN 10 058 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 20 Article no. Dimension Kg/m Lengths (m) 20015 20022 20029 20037 20043 20057 20092 20112 16 X 20 X 25 X 30 X 40 X 50 X 75 X 100 X 3 MM 3 MM 3 MM 3 MM 3 MM 3 MM 3 MM 3 MM 0.38 0.48 0.60 0.72 0.96 1.20 1.80 2.40 4 4 4 4 4 4 4 4 20180 20193 20215 20222 20227 20230 20235 20238 20241 20245 20246 20248 20255 20260 20270 16 X 20 X 25 X 30 X 35 X 40 X 50 X 60 X 70 X 80 X 90 X 100 X 120 X 130 X 150 X 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 0.64 0.80 1.00 1.20 1.40 1.60 2.00 2.40 2.80 3.20 3.60 4.00 4.80 5.20 6.01 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 20283 20285 20288 20291 20295 20300 20305 20308 20312 20315 25 X 30 X 40 X 50 X 60 X 70 X 80 X 100 X 120 X 150 X 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 1.20 1.44 1.92 2.40 2.88 3.36 3.84 4.80 5.77 7.21 6 6 6 6 6 6 6 6 6 6 20 X 8 MM 25 X 8 MM 1.28 1.60 6 6 20318 20320 Article no. Dimension Kg/m Lengths (m) 20323 20325 20328 20330 20336 20341 20346 20356 20361 20366 20376 30 X 40 X 50 X 60 X 70 X 75 X 80 X 100 X 120 X 130 X 150 X 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 1.92 2.56 3.20 3.84 4.48 4.80 5.12 6.41 7.69 8.33 9.61 6 6 6 6 6 6 6 6 6 6 6 20383 20388 20391 20401 20411 20416 20421 20426 20431 20436 20441 20446 20451 20461 20 X 10 MM 25 X 10 MM 30 X 10 MM 40 X 10 MM 50 X 10 MM 60 X 10 MM 65 X 10 MM 70 X 10 MM 75 X 10 MM 80 X 10 MM 90 X 10 MM 100 X 10 MM 120 X 10 MM 150 X 10 MM 1.60 2.00 2.40 3.20 4.00 4.80 5.20 5.60 6.01 6.41 7.21 8.01 9.61 12.00 6 6 6 6 6 6 6 6 6 6 6 6 6 6 20481 20491 20496 20511 20516 20526 20531 20541 40 X 12 MM 50 X 12 MM 60 X 12 MM 75 X 12 MM 80 X 12 MM 100 X 12 MM 120 X 12 MM 150 X 12 MM 3.84 4.80 5.77 7.21 7.69 9.61 11.50 14.40 6 6 6 6 6 6 6 6 20556 20566 20571 20586 20591 20596 20601 20616 40 X 15 MM 50 X 15 MM 60 X 15 MM 80 X 15 MM 90 X 15 MM 100 X 15 MM 120 X 15 MM 150 X 15 MM 4.80 6.01 7.21 9.61 10.80 12.00 14.40 18.00 6 6 6 6 6 6 6 6 20631 20636 20641 20661 20671 20676 20691 40 X 20 MM 50 X 20 MM 60 X 20 MM 80 X 20 MM 100 X 20 MM 120 X 20 MM 150 X 20 MM 6.41 8.01 9.61 12.80 16.00 19.20 24.00 6 6 6 6 6 6 6 20711 20766 50 X 25 MM 150 X 25 MM 10.00 30.00 6 6 20771 20801 20806 50 X 30 MM 100 X 30 MM 130 X 30 MM 12.00 24.00 31.20 6 6 6 20881 100 X 50 MM 40.00 6 www.norskstaal.no 15 STEEL Steel flats NVA Article no. Tolerances acc. to EN 10 058 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.2-DNV ARTICLE GROUP 3 Article no. Dimension Kg/m Lengths (m) 3113 3123 3128 3138 3148 3166 3173 3178 3183 40 X 50 X 60 X 70 X 80 X 100 X 120 X 130 X 150 X 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 1.60 2.00 2.40 2.80 3.20 4.00 4.80 5.20 6.01 6 6 6 6 6 6 6 6 6 3197 3203 3206 3216 3226 3231 3236 3241 3246 3251 3256 3261 3266 3281 20 X 25 X 30 X 40 X 50 X 60 X 65 X 70 X 75 X 80 X 90 X 100 X 120 X 150 X 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 0.96 1.20 1.44 1.92 2.40 2.88 3.12 3.36 3.60 3.84 4.32 4.80 5.77 7.21 6 6 6 6 6 6 6 6 6 6 6 6 6 6 3288 3293 3298 3311 3321 3326 3331 3336 3341 3346 3351 3356 3361 3366 3371 3376 20 X 25 X 30 X 40 X 50 X 60 X 65 X 70 X 75 X 80 X 90 X 100 X 120 X 130 X 140 X 150 X 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 1.28 1.60 1.92 2.56 3.20 3.84 4.16 4.48 4.80 5.12 5.77 6.41 7.69 8.33 8.97 9.61 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 3383 3388 3391 3401 3411 3416 3421 3426 3431 3436 3441 3446 3451 3456 20 X 10 MM 25 X 10 MM 30 X 10 MM 40 X 10 MM 50 X 10 MM 60 X 10 MM 65 X 10 MM 70 X 10 MM 75 X 10 MM 80 X 10 MM 90 X 10 MM 100 X 10 MM 120 X 10 MM 130 X 10 MM 1.60 2.00 2.40 3.20 4.00 4.80 5.20 5.60 6.01 6.41 7.21 8.01 9.61 10.40 6 6 6 6 6 6 6 6 6 6 6 6 6 6 16 Dimension Kg/m Lengths (m) 3458 3461 140 X 10 MM 150 X 10 MM 11.20 12.00 6 6 3475 3477 3481 3491 3496 3506 3511 3516 3526 3531 3536 3541 30 X 12 MM 35 X 12 MM 40 X 12 MM 50 X 12 MM 60 X 12 MM 70 X 12 MM 75 X 12 MM 80 X 12 MM 100 X 12 MM 120 X 12 MM 130 X 12 MM 150 X 12 MM 2.88 3.36 3.84 4.80 5.77 6.73 7.21 7.69 9.61 11.50 12.50 14.40 6 6.3 6 6 6 6 6 6 6 6 6 6 3549 3551 3556 3566 3571 3576 3578 3581 3586 3596 3601 3606 3616 30 X 15 MM 35 X 15 MM 40 X 15 MM 50 X 15 MM 60 X 15 MM 65 X 15 MM 70 X 15 MM 75 X 15 MM 80 X 15 MM 100 X 15 MM 120 X 15 MM 130 X 15 MM 150 X 15 MM 3.60 4.20 4.80 6.01 7.21 7.81 8.41 9.01 9.61 12.00 14.40 15.60 18.00 6 5.3 6 6 6 6 6 6 6 6 6 6 6 3631 3636 3641 3651 3656 3661 3666 3671 3676 3681 3691 40 X 20 MM 50 X 20 MM 60 X 20 MM 70 X 20 MM 75 X 20 MM 80 X 20 MM 90 X 20 MM 100 X 20 MM 120 X 20 MM 130 X 20 MM 150 X 20 MM 6.41 8.01 9.61 11.20 12.00 12.80 14.40 16.00 19.20 20.80 24.00 6 6 6 6 6 6 6 6 6 6 6 3701 3711 3716 3731 3736 3746 3751 3761 3766 40 X 25 MM 50 X 25 MM 60 X 25 MM 75 X 25 MM 80 X 25 MM 100 X 25 MM 120 X 25 MM 130 X 25 MM 150 X 25 MM 8.01 10.00 12.00 15.00 16.00 20.00 24.00 26.00 30.00 6 6 6 6 6 6 6 6 6 3771 3791 3801 3811 50 X 30 MM 80 X 30 MM 100 X 30 MM 150 X 30 MM 12.00 19.20 24.00 36.00 6 6 6 6 3831 3851 3866 70 X 40 MM 100 X 40 MM 150 X 40 MM 22.40 32.00 48.00 6 6 6 3871 3881 75 X 50 MM 100 X 50 MM 30.00 40.00 6 6 www.norskstaal.no STEEL Steel flats S355J2 Steel wide flats NVA Acc. to EN 10 025-2 Tolerances acc. to EN 10 058 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.1 Rolled or cut from plate Toleranes acc. to DIN 59 200 or NS-EN 10 029 at our discretion Inspection certificate acc. to EN 10 204-3.2-DNV ARTICLE GROUP 9 Article no. ARTICLE GROUP 160 Dimension Kg/m Lengths (m) Article no. Dimension Kg/m Lengths (m) 9020 9025 9030 9040 40 X 50 X 60 X 100 X 6 MM 6 MM 6 MM 6 MM 1.92 2.40 2.88 4.80 6 6 6 6 160029 160036 160043 160050 180 X 200 X 250 X 300 X 6 MM 6 MM 6 MM 6 MM 8.64 9.60 12.00 14.40 6 6 6 6 9050 9060 9065 9070 9072 9075 50 X 60 X 80 X 100 X 120 X 150 X 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 3.20 3.84 5.12 6.41 7.69 9.61 6 6 6 6 6 6 160064 160071 160078 160085 180 X 200 X 250 X 300 X 8 MM 8 MM 8 MM 8 MM 11.52 12.80 16.00 19.20 6 6 6 6 9080 9090 9095 9100 9110 9150 50 X 10 MM 60 X 10 MM 75 X 10 MM 80 X 10 MM 100 X 10 MM 150 X 10 MM 4.00 4.80 6.00 6.40 8.00 12.00 6 6 6 6 6 6 160106 160120 160127 160141 160148 160 X 10 MM 180 X 10 MM 200 X 10 MM 250 X 10 MM 300 X 10 MM 12.80 14.40 16.00 20.00 24.00 6 6 6 6 6 9180 9190 9200 100 X 12 MM 120 X 12 MM 150 X 12 MM 9.61 11.50 14.40 6 6 6 160183 160190 160197 160204 160226 160227 160229 160230 180 X 12 MM 200 X 12 MM 250 X 12 MM 300 X 12 MM 180 X 15 MM 200 X 15 MM 250 X 15 MM 300 X 15 MM 17.28 19.20 24.00 28.80 21.60 24.00 30.00 36.00 6 6 6 6 6 6 6 6 160295 160302 160309 160316 180 X 20 MM 200 X 20 MM 250 X 20 MM 300 X 20 MM 28.80 32.00 40.00 48.00 6 6 6 6 160351 160358 160365 200 X 25 MM 250 X 25 MM 300 X 25 MM 40.00 50.00 60.00 6 6 6 160386 160393 160400 200 X 30 MM 250 X 30 MM 300 X 30 MM 48.00 60.00 72.00 6 6 6 Steel flat rails S355JO Acc. to EN 10 025-2 Delivered with 2 round corners Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 33 Article no. 33008 33015 Dimension 30 X 50 MM 40 X 60 MM Kg/m Lengths (m) Kg/Length 11.80 19.00 10 10 118.00 190.00 Steel crane rails Acc. to DIN 536 Tensile strength min. 690N/mm2 Delivered with straight ends Length tolerances +/-50 mm Declaration of compliance with the order acc. to EN 10 204-2.1 58045 58055 58065 58075 58100 58120 Dimension A 45 A 55 A 65 A 75 A 100 A 120 Acc. to EN 10 025-2 Tolerances acc. to EN 10 029 Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 162 ARTICLE GROUP 58 Article no. Steel wide flats S355J2 Kg/m Lengths (m) Kg/Length 22.70 32.70 44.40 57.80 76.70 103.40 12 12 12 12 12 12 272.40 392.40 532.80 693.60 920.40 1240.80 Article no. 162110 162115 162210 162315 www.norskstaal.no Dimension 200 X 10 MM 200 X 15 MM 250 X 10 MM 300 X 15 MM Kg/m Lengths (m) 16.00 24.00 20.00 36.00 6 6 6 6 17 STEEL L-profile NVD 36 Article no. Tolreances acc. to DIN 1022 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.2-DNV Chargenumber stamped in the material on both ends ARTICLE GROUP 14 Article no. Dimension Kg/plate 14010 200 X 90 X 9,0 X 12 MM 22.44 14020 14023 14025 250 X 90 X 9,0 X 13 MM 250 X 90 X 10,5 X 15 MM 250 X 90 X 11,5 X 16 MM 26.72 30.91 33.25 14030 14035 300 X 100 X 10,5 X 15 MM 300 X 100 X 11,5 X 16 MM 36.31 39.27 Tolerances acc. to EN 10 067 Length tolerances -0/+100 mm Inspection certificate acc. to EN 10 204-3.2-DNV ARTICLE GROUP 4 Dimension Kg/m Lengths (m) 4540 4550 4560 4570 4580 260 X 12,0 MM 280 X 12,0 MM 300 X 12,0 MM 320 X 12,0 MM 340 X 12.0 MM 33.05 36.41 39.00 43.35 47.02 12 12 12 12 12 4600 370 X 13,0 MM 55.70 12 4610 4615 340 X 14,0 MM 400 X 14,0 MM 52.55 65.18 12 12 Steel bulb flats (HP) NVD 36 Tolerances acc. to EN 10 067 Length tolerances -0/+100 mm Inspection certificate acc. to EN 10 204-3.2-DNV ARTICLE GROUP 13 Steel bulb flats (HP) NVA Article no. Dimension Kg/m Lengths (m) Article no. Dimension Kg/m Lengths (m) 13120 13140 13160 13180 120 X 140 X 160 X 180 X 8,0 MM 8,0 MM 8,0 MM 8,0 MM 9.35 11.01 12.95 15.10 12 12 12 12 13190 180 X 10,0 MM 17.95 12 4.95 6.20 7.42 6 6 6 13192 13194 13196 13198 140 X 160 X 180 X 200 X 9,0 MM 9,0 MM 9,0 MM 9,0 MM 12.14 14.28 16.52 18.87 6 6 12 12 7,0 MM 7,0 MM 7,0 MM 7,0 MM 7,0 MM 5.60 7.00 8.42 9.93 11.63 6 6 6 6 6 13200 13220 13240 13260 200 X 10,0 MM 220 X 10,0 MM 240 X 10,0 MM 260 X 10,0 MM 20.50 23.26 25.91 28.87 12 12 12 12 100 X 120 X 140 X 160 X 180 X 8,0 MM 8,0 MM 8,0 MM 8,0 MM 8,0 MM 7.80 9.35 11.01 12.95 15.10 6 6 6 6 12 13300 300 X 11,0 MM 37.36 12 13301 13302 200 X 11,5 MM 220 X 11,5 MM 22.80 25.89 12 12 4350 4360 4390 4400 140 X 160 X 180 X 200 X 9,0 MM 9,0 MM 9,0 MM 9,0 MM 12.14 14.28 16.52 18.87 6 6 12 12 13303 13306 13310 13320 240 X 12,0 MM 260 X 12,0 MM 300 X 12,0 MM 320 X 12,0 MM 29.86 33.05 39.78 43.35 12 12 12 12 4420 4430 4440 4450 4460 180 X 10,0 MM 200 X 10,0 MM 220 X 10,0 MM 240 X 10,0 MM 260 X 10,0 MM 17.95 20.50 23.26 25.91 28.87 12 12 12 12 12 4485 4490 4500 260 X 11,0 MM 280 X 11,0 MM 300 X 11,0 MM 30.91 34.17 37.36 12 12 12 4510 200 X 11,5 MM 22.80 12 4521 4530 220 X 12,0 MM 240 X 12,0 MM 26.72 29.86 12 12 4200 4210 4220 80 X 6,0 MM 100 X 6,0 MM 120 X 6,0 MM 4226 4230 4240 4250 4260 80 X 100 X 120 X 140 X 160 X 4280 4290 4300 4310 4340 18 www.norskstaal.no STEEL Steel equal angles S235JR Steel unequal angles S235JR Acc. to EN 10 025-2 Dimensions acc. to EN 10 056-1 Tolerances acc. to EN 10 056-2 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.1 Acc. to EN 10 025-2 Dimensions acc. to EN 10 056-1 Tolerances acc. to EN 10 056-2 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 21 Article no. Dimension Kg/m Lengths (m) 21024 21032 20 X 20 X 3 MM 25 X 25 X 3 MM 0.90 1.14 6 6 21040 25 X 25 X 4 MM 1.48 6 21056 21064 21068 30 X 30 X 3 MM 30 X 30 X 4 MM 30 X 30 X 5 MM 1.39 1.82 2.22 6 6 6 21072 21080 35 X 35 X 4 MM 40 X 40 X 4 MM 2.14 2.47 6 6 21085 21095 21097 40 X 40 X 5 MM 45 X 45 X 5 MM 50 X 50 X 5 MM 3.03 3.45 3.85 6 6 6 21099 21108 50 X 50 X 6 MM 55 X 55 X 6 MM 4.56 5.05 6 6 21109 50 X 50 X 8 MM 5.94 6 21110 21123 60 X 60 X 6 MM 60 X 60 X 6 MM 5.53 5.53 6 12 21134 60 X 60 X 8 MM 7.23 6 21143 21155 21158 65 X 65 X 7 MM 70 X 70 X 7 MM 70 X 70 X 7 MM 6.97 7.53 7.53 12 6 12 21176 21190 21197 75 X 75 X 8 MM 80 X 80 X 8 MM 80 X 80 X 8 MM 9.21 9.85 9.85 21232 21239 100 X 100 X 10 MM 100 X 100 X 10 MM 21263 ARTICLE GROUP 22 Article no. Dimension Kg/m Lengths (m) 22025 22033 40 X 20 X 4 MM 45 X 30 X 4 MM 1.81 2.30 6 6 22034 22035 22036 22043 45 X 50 X 60 X 60 X 5 MM 5 MM 5 MM 5 MM 2.83 3.42 3.44 3.84 6 6 6 6 22050 60 X 40 X 6 MM 4.55 6 22057 65 X 50 X 5 MM 4.44 6 22060 22063 65 X 50 X 7 MM 65 X 50 X 7 MM 6.09 6.09 6 12 22069 22073 22079 75 X 50 X 6 MM 75 X 50 X 7 MM 75 X 50 X 8 MM 5.70 6.64 7.52 12 12 12 22092 80 X 40 X 6 MM 5.52 6 22114 22115 100 X 50 X 6 MM 100 X 50 X 8 MM 6.99 9.17 12 12 22128 22129 100 X 65 X 7 MM 100 X 65 X 8 MM 8.95 10.16 12 12 12 6 12 22137 22139 100 X 75 X 8 MM 100 X 75 X 9 MM 10.80 12.00 12 12 22151 22155 120 X 80 X 8 MM 120 X 80 X 10 MM 12.40 15.30 12 12 15.40 15.40 6 12 22167 22169 130 X 65 X 8 MM 130 X 65 X 10 MM 12.10 14.90 12 12 120 X 120 X 12 MM 22.05 12 21277 140 X 140 X 13 MM 28.10 12 22187 22188 150 X 75 X 9 MM 150 X 75 X 10 MM 15.60 17.44 12 12 21289 150 X 150 X 12 MM 27.95 12 22196 22197 150 X 100 X 10 MM 150 X 100 X 12 MM 19.40 23.10 12 12 21291 150 X 150 X 15 MM 34.48 12 22218 160 X 80 X 12 MM 22.00 12 21295 200 X 200 X 16 MM 49.50 12 22242 22244 200 X 100 X 10 MM 200 X 100 X 12 MM 23.50 27.80 12 12 www.norskstaal.no 30 X 40 X 30 X 40 X 19 STEEL Steel equal angles NVA Steel unequal angles NVA Dimensions acc. to EN 10 056-1 Tolerances acc. to EN 10 056-2 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.2-DNV Dimensions acc. to EN 10 056-1 Tolerances acc. to EN 10 056-2 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.2-DNV ARTICLE GROUP 15 Article no. Dimension ARTICLE GROUP 16 Kg/m Lengths (m) Article no. Dimension Kg/m Lengths (m) 15092 15099 15109 50 X 50 X 5 MM 50 X 50 X 6 MM 50 X 50 X 8 MM 3.85 4.56 5.94 6 6 6 16057 16058 16063 65 X 50 X 5 MM 65 X 50 X 6 MM 65 X 50 X 7 MM 4.44 5.26 6.09 6 12 12 15120 15123 15134 15138 60 X 60 X 60 X 60 X 60 X 6 MM 60 X 6 MM 60 X 8 MM 60 X 10 MM 5.53 5.53 7.23 8.86 6 12 6 6 15141 15152 65 X 65 X 7 MM 65 X 65 X 9 MM 6.97 8.79 6 6 16067 16069 16071 16073 16077 16079 75 X 75 X 75 X 75 X 75 X 75 X 6 MM 6 MM 7 MM 7 MM 8 MM 8 MM 5.70 5.70 6.64 6.64 7.52 7.52 6 12 6 12 6 12 15155 15158 15165 70 X 70 X 7 MM 70 X 70 X 7 MM 70 X 70 X 9 MM 7.53 7.53 9.53 6 12 12 16092 16103 80 X 40 X 6 MM 80 X 40 X 8 MM 5.52 7.21 6 12 15169 15176 15183 15184 75 X 75 X 75 X 75 X 75 X 8 MM 75 X 8 MM 75 X 10 MM 75 X 10 MM 9.21 9.21 11.30 11.30 6 12 6 12 15190 15197 15207 80 X 80 X 8 MM 80 X 80 X 8 MM 80 X 80 X 10 MM 9.85 9.85 12.10 6 12 12 15218 90 X 90 X 9 MM 12.40 12 15232 15239 15246 100 X 100 X 10 MM 100 X 100 X 10 MM 100 X 100 X 12 MM 15.40 15.40 18.20 6 12 12 15253 110 X 110 X 10 MM 16.90 12 15260 15263 120 X 120 X 11 MM 120 X 120 X 12 MM 20.30 22.05 12 12 15274 130 X 130 X 12 MM 24.10 12 15289 15290 15291 15292 150 X 150 X 12 MM 150 X 150 X 14 MM 150 X 150 X 15 MM 150 X 150 X 16 MM 27.95 32.20 34.48 36.60 12 12 12 12 15295 200 X 200 X 16 MM 49.50 12 20 50 X 50 X 50 X 50 X 50 X 50 X 16113 16114 16115 16118 16127 100 X 100 X 100 X 100 X 100 X 50 X 6 MM 50 X 6 MM 50 X 8 MM 50 X 8 MM 50 X 10 MM 6.99 6.99 9.17 9.17 11.30 6 12 12 6 12 16128 16129 16130 16131 100 X 100 X 100 X 100 X 65 X 7 MM 65 X 8 MM 65 X 9 MM 65 X 10 MM 8.95 10.16 11.30 12.48 12 12 12 12 16137 16139 16140 100 X 75 X 8 MM 100 X 75 X 9 MM 100 X 75 X 10 MM 10.80 12.00 13.36 12 12 12 16151 16155 16163 120 X 80 X 8 MM 120 X 80 X 10 MM 120 X 80 X 12 MM 12.40 15.30 18.20 12 12 12 16167 16169 16171 130 X 65 X 8 MM 130 X 65 X 10 MM 130 X 65 X 12 MM 12.10 14.90 17.75 12 12 12 16187 16188 16190 150 X 75 X 9 MM 150 X 75 X 10 MM 150 X 75 X 12 MM 15.60 17.44 20.45 12 12 12 16192 16194 150 X 90 X 10 MM 150 X 90 X 12 MM 18.56 22.00 12 12 16196 16197 150 X 100 X 10 MM 150 X 100 X 12 MM 19.40 23.10 12 12 16242 16244 16245 200 X 100 X 10 MM 200 X 100 X 12 MM 200 X 100 X 14 MM 23.50 27.80 32.23 12 12 12 www.norskstaal.no STEEL Steel equal angles S355J2 Steel unequal angles S355J2 Acc. to EN 10 025-2 Dimensions acc. to EN 10 056-1 Tolerances acc. to EN 10 056-2 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 024-3.1 Chargenumber stamped on both ends for profiles with weigth from 15 kg/m Acc. to EN 10 025-2 Dimensions acc. to EN 10 056-1 Tolerances acc. to EN 10 056-2 Length tolerances +/-100 mm Inspection certificate acc. to EN 10 204-3.1 Chargenumber stamped on both ends for profiles with weigth from 15 kg/m ARTICLE GROUP 186 Article no. ARTICLE GROUP 187 Dimension Kg/m Lengths (m) Article no. Dimension 186045 40 X 40 X 5 MM 3.03 6 187030 186049 186050 186054 186055 50 X 50 X 50 X 50 X 5 MM 5 MM 6 MM 6 MM 3.85 3.85 4.56 4.56 6 12 6 12 187114 187116 187117 187120 100 X 100 X 100 X 100 X 186059 186060 186063 60 X 60 X 6 MM 60 X 60 X 6 MM 60 X 60 X 8 MM 5.53 5.53 7.23 6 12 12 186067 186068 186070 70 X 70 X 7 MM 70 X 70 X 7 MM 70 X 70 X 9 MM 7.53 7.53 9.53 6 12 12 186072 186073 186075 75 X 75 X 8 MM 75 X 75 X 8 MM 75 X 75 X 10 MM 9.21 9.21 11.30 6 12 12 186079 186080 186082 80 X 80 X 8 MM 80 X 80 X 8 MM 80 X 80 X 10 MM 9.85 9.85 12.10 6 12 12 186090 90 X 90 X 9 MM 12.40 12 186099 186100 186110 100 X 100 X 10 MM 100 X 100 X 10 MM 100 X 100 X 12 MM 15.40 15.40 18.20 6 12 12 186120 120 X 120 X 12 MM 22.05 12 186150 150 X 150 X 14 MM 32.20 12 186180 180 X 180 X 18 MM 48.60 12 186200 200 X 200 X 16 MM 49.50 12 50 X 50 X 50 X 50 X 75 X 50 X 7 MM Kg/m Lengths (m) 6.64 12 65 X 7 MM 65 X 10 MM 50 X 8 MM 75 X 9 MM 8.95 12.60 9.17 12.00 12 12 12 12 187128 120 X 80 X 10 MM 15.30 12 187130 130 X 65 X 10 MM 14.90 12 187133 187135 187136 187138 150 X 75 X 9 MM 150 X 75 X 11 MM 150 X 90 X 10 MM 150 X 100 X 12 MM 15.60 19.00 18.56 23.10 12 12 12 12 187139 187140 180 X 90 X 10 MM 180 X 90 X 12 MM 20.96 24.88 12 12 187142 187150 200 X 100 X 10 MM 200 X 100 X 12 MM 23.50 27.80 12 12 Steel tees S235JR Acc. to EN 10 025-2 Tolerances acc. to EN 10 055 Length tolerances +/-100 mm Test report acc. to EN 10 204-2.2 ARTICLE GROUP 24 Article no. Dimension Kg/m Lengths (m) 24022 30 X 30 X 4 MM 1.81 6 24036 40 X 40 X 5 MM 3.02 6 24050 50 X 50 X 6 MM 4.53 6 24060 60 X 60 X 7 MM 6.35 12 24064 70 X 70 X 8 MM 8.49 12 24074 80 X 80 X 9 MM 10.90 12 24085 100 X 100 X 11 MM 16.70 12 24092 120 X 120 X 13 MM 23.70 12 24099 140 X 140 X 15 MM 31.90 12 www.norskstaal.no 21 STEEL Steel channels UNP S235JR Article no. Acc. to EN 10 025-2 Tolerances acc. to DIN 1026/ NS-EN 10 279 Length tolerances +/-100 mm Test report acc. to EN 10 204-2.2 ARTICLE GROUP 40 Article no. Profile no. Kg/m Lengths (m) Kg/Length 40040 NR 40 (40X35) 4.97 6 29.80 40050 NR 50 (50X38) 5.70 6 34.20 40060 NR 60 (60X30) 5.17 6 31.00 40065 NR 65 (65X42) 7.20 6 43.20 Dimension Kg/m Lengths (m) 43242 43262 43282 UNP 240 UNP 260 UNP 280 33.90 38.70 42.60 12 12 12 406.80 464.40 511.20 43302 43322 43352 UNP 300 UNP 320 UNP 350 47.10 61.00 62.40 12 12 12 565.20 732.00 748.80 43402 UNP 400 73.20 12 878.40 Steel channels UNP S235JR Acc. to EN 10 025-2 Tolerances acc. to DIN 1026/NS-EN 10 279 Length tolerances -0/+100 mm Test report acc. to EN 10 204-2.2 ARTICLE GROUP 41 Article no. Profile no. Kg/m Lengths (m) Kg/Length 41080 41082 UNP 80 UNP 80 8.81 8.81 6 12 52.90 105.70 41100 41102 UNP 100 UNP 100 10.80 10.80 6 12 64.80 129.60 41120 41122 UNP 120 UNP 120 13.70 13.70 6 12 82.20 164.40 41142 UNP 140 16.30 12 195.60 Steel channels UNP S355J2 Acc. to EN 10 025-2 Tolerances acc. to DIN 1026/NS-EN 10 279 Length tolerances -0/+100 mm Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 43 Article no. Profile no. 43082 UNP 80 8.81 12 105.70 43102 43122 43142 43162 43182 UNP 100 UNP 120 UNP 140 UNP 160 UNP 180 10.80 13.70 16.30 19.20 22.40 12 12 12 12 12 129.60 164.40 195.60 230.40 268.80 43202 43222 UNP 200 UNP 220 25.80 30.00 12 12 309.60 360.00 22 Kg/m Lengths (m) Kg/Length UNP Measurements in mm Surface Desig- Sectional nation area h b s t cm2 m2/m 30 40 50 60 65 30 40 50 60 65 33 35 38 30 42 5 5 5 6 5,5 7 7 7 6 7,5 80 100 120 140 160 80 100 120 140 160 45 50 55 60 65 6 6 7 7 7,5 8 8,5 9 10 10,5 11,0 13,5 17,0 20,4 24,0 0,312 0,372 0,434 0,489 0,546 180 200 220 240 260 180 200 220 240 260 70 75 80 85 90 8 8,5 9 9,5 10 11 11,5 12,5 13 14 28,0 32,2 37,4 42,3 48,3 0,611 0,661 0,718 0,775 0,834 280 300 320 350 400 280 300 320 350 400 95 100 100 100 110 10 10 14 14 14 15 16 17,5 16 18 53,3 58,8 75,8 77,3 91,5 0,890 0,950 0,982 1,05 1,182 www.norskstaal.no 5,44 6,21 7,12 6,46 9,03 0,174 0,199 0,232 0,215 0,273 STEEL Steel channels UNP S355G11 + N/M Steel channels UPE S355N NORSOK M-120 Rev. 5, MDS Y-26, rev. 5 and acc. to EN 10225 Tolerances acc. to EN 10 034 Length tolerances -0/+100 mm Chargenumber stamped on both ends Inspection certificate acc. to EN 10 204-3.1 Acc. to EN 10 025-3 Tolerances acc. to DIN 1026/ NS-EN 10 279 Guaranteed Si 0.15-0.25% Length tolerances -0/+100 mm Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 39 ARTICLE GROUP 176 Article no. Profile no. Kg/m Lengths (m) Kg/Length 176100 176120 176140 176160 176180 UNP 100 UNP 120 UNP 140 UNP 160 UNP 180 10.80 13.70 16.30 19.20 22.40 12 12 12 12 12 129.60 164.40 195.60 230.40 268.80 176200 176220 176240 176260 176280 UNP 200 UNP 220 UNP 240 UNP 260 UNP 280 25.80 30.00 33.90 38.70 42.60 12 12 12 12 12 309.60 360.00 406.80 464.40 511.20 176300 176350 UNP 300 UNP 350 47.10 61.80 12 12 565.20 741.60 176400 UNP 400 73.20 12 878.40 Article no. Profile no. Kg/m Lengths (m) Kg/Length 39092 UPE 80 8.10 12 97.20 39112 39132 39152 39172 39192 UPE 100 UPE 120 UPE 140 UPE 160 UPE 180 10.00 12.40 14.80 17.30 20.10 12 12 12 12 12 120.00 148.80 177.60 207.60 241.20 39212 39215 39232 39235 39252 39255 39282 39285 UPE 200 UPE 200 UPE 220 UPE 220 UPE 240 UPE 240 UPE 270 UPE 270 23.30 23.30 27.10 27.10 30.80 30.80 35.90 35.90 12 15 12 15 12 15 12 15 279.60 349.50 325.20 406.50 369.60 462.00 430.80 538.50 39302 39305 39332 39362 UPE 300 UPE 300 UPE 330 UPE 360 45.30 45.30 54.40 62.40 12 15 12 12 543.60 679.50 652.80 748.80 39402 UPE 400 73.80 12 885.60 UPE Measurements in mm Surface y - y Desig- Sectional nation area Iy Wy iy Iz h b s t cm2 m2/m mm4 mm3 mm mm4 UPE x106 x103 x106 Axis z-z W mm3 x103 i mm z z 80 80 50 4,0 7,0 1010 0,343 1,07 26,8 32,6 0,25 8,0 15,9 100 100 55 4,5 7,5 1250 0,402 2,07 41,4 40,7 0,38 10,6 17,5 120 120 60 5,0 8,0 1540 0,460 3,64 60,6 48,6 0,55 13,8 19,0 140 140 65 5,0 9,0 1840 0,520 5,99 85,6 57,1 0,79 18,2 20,7 160 160 70 5,5 9,5 2170 0,579 9,11 114,0 64,8 1,07 22,6 22,2 180 180 75 5,5 10,5 2510 0,639 13,53 150,0 73,4 1,44 28,6 23,9 200 200 80 6,0 11,0 2900 0,697 19,09 191,0 81,1 1,87 34,4 25,4 220 220 85 6,5 12,0 3390 0,756 26,82 244,0 89,0 2,47 42,5 27,0 240 240 90 7,0 12,5 3850 0,813 35,99 300,0 96,7 3,11 50,1 28,4 270 270 95 7,5 13,5 4480 0,892 52,55 389,0 108,0 4,01 60,7 29,9 300 300 100 9,5 15,0 5660 0,968 78,23 522,0 118,0 5,38 75,6 30,8 330 330 105 11,0 16,0 6780 1,043 110,08 667,0 127,0 6,81 89,7 31,7 360 360 110 12,0 17,0 7790 1,121 148,25 824,0 138,0 8,43 105,0 32,9 400 400 115 13,5 18,0 9190 1,218 209,81 1049,0 151,0 10,40 123,0 33,7 www.norskstaal.no 23 STEEL Steel sections IPE S355J2 Steel sections IPE S355G11 + N/M Acc. to EN 10 025-2 Tolerances acc. to EN 10 034 Length tolerances -0/+100 mm Inspection certifcate acc. to EN 10 204-3.1 NORSOK M-120 Rev. 5, MDS Y-26, rev. 5 and acc. to EN 10 225 Tolerances acc. to EN 10 034 Length tolerances -0/+100 mm Chargenumber stamped on both ends Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 49 Article no. Profile no. Kg/m Lengths (m) Kg/Length 49082 IPE 80 6.12 12 73.40 49102 49122 49142 49145 49162 49165 49182 49185 IPE 100 IPE 120 IPE 140 IPE 140 IPE 160 IPE 160 IPE 180 IPE 180 8.26 10.60 13.20 13.20 16.10 16.10 19.20 19.20 12 12 12 15 12 15 12 15 99.10 127.20 158.40 198.00 193.20 241.50 230.40 288.00 49202 49205 49222 49225 49242 49245 49272 49275 49276 IPE 200 IPE 200 IPE 220 IPE 220 IPE 240 IPE 240 IPE 270 IPE 270 IPE 270 22.90 22.90 26.70 26.70 31.30 31.30 36.80 36.80 36.80 12 15 12 15 12 15 12 15 20 274.80 343.50 320.40 400.50 375.60 469.50 441.60 552.00 736.00 49302 49305 49306 49332 49335 49336 49362 49365 49366 IPE 300 IPE 300 IPE 300 IPE 330 IPE 330 IPE 330 IPE 360 IPE 360 IPE 360 43.00 43.00 43.00 50.10 50.10 50.10 58.20 58.20 58.20 12 15 20 12 15 20 12 15 20 516.00 645.00 860.00 601.20 751.50 1002.00 698.40 873.00 1164.00 49402 49405 49406 49452 49456 IPE 400 IPE 400 IPE 400 IPE 450 IPE 450 67.60 67.60 67.60 79.20 79.20 12 15 20 12 20 811.20 1014.00 1352.00 950.40 1584.00 49502 49505 49506 49552 49556 IPE 500 IPE 500 IPE 500 IPE 550 IPE 550 92.50 92.50 92.50 108.10 108.10 12 15 20 12 20 1110.00 1387.50 1850.00 1297.20 2162.00 49602 49606 IPE 600 IPE 600 124.40 124.40 12 20 1492.80 2488.00 24 ARTICLE GROUP 177 Article no. Profile no. Kg/m Lengths (m) Kg/Length 177100 177120 177140 177160 177180 IPE 100 IPE 120 IPE 140 IPE 160 IPE 180 8.26 10.60 13.20 16.10 19.20 12 12 12 12 12 99.10 127.20 158.40 193.20 230.40 177200 177220 177240 177270 IPE 200 IPE 220 IPE 240 IPE 270 22.80 26.70 31.30 36.80 12 12 12 12 273.60 320.40 375.60 441.60 177300 177330 177360 IPE 300 IPE 330 IPE 360 43.00 50.10 58.20 12 12 12 516.00 601.20 698.40 177400 177450 IPE 400 IPE 450 67.60 79.20 12 12 811.20 950.40 177500 IPE 500 92.50 12 1110.00 177600 IPE 600 124.40 12 1492.80 IPE Measurements in mm Surface Desig- Sectional nation area h b s t cm2 m2/m 80 100 120 140 160 80 100 120 140 160 46 55 64 73 82 3,8 4,1 4,4 4,7 5,0 5,2 5,7 6,3 6,9 7,4 7,64 10,3 13,2 16,4 20,1 0,328 0,400 0,475 0,551 0,623 180 200 220 240 270 180 200 220 240 270 91 100 110 120 135 5,3 5,6 5,9 6,2 6,6 8,0 8,5 9,2 9,8 10,2 23,9 28,5 33,4 39,1 45,9 0,698 0,768 0,848 0,922 1,04 300 330 360 400 300 330 360 400 150 160 170 180 7,1 7,5 8,0 8,6 10,7 11,5 12,7 13,5 53,8 62,6 72,7 84,5 1,16 1,25 1,35 1,47 450 500 550 600 450 500 550 600 190 200 210 220 9,4 10,2 11,1 12,0 14,6 16,0 17,2 19,0 98,8 116 134 156 1,61 1,74 1,88 2,01 www.norskstaal.no STEEL Steel beams HEA S355J2 Steel beams HEA S355G11 + N/M Acc. to EN 10 025-2 Tolerances acc. to EN 10 034 Length tolerances -0/+100 mm Inspection certificate acc. to EN 10 204-3.1 NORSOK M-120 Rev. 5, MDS Y-26, rev. 5 and acc. to EN 10 225 Toleraces acc. to EN 10 034 Length tolerances -0/+100 mm Chargenumber stamped on both ends Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 48 ARTICLE GROUP 178 Article no. Profile no. Kg/m Lengths (m) Kg/Length Article no. 48102 48105 48122 48142 48145 48162 48165 48182 48185 HEA 100 HEA 100 HEA 120 HEA 140 HEA 140 HEA 160 HEA 160 HEA 180 HEA 180 17.00 17.00 20.30 25.20 25.20 31.00 31.00 36.20 36.20 12 15 12 12 15 12 15 12 15 204.00 255.00 243.60 302.40 378.00 372.00 465.00 434.40 543.00 178100 178120 178140 178160 178180 HEA HEA HEA HEA HEA 100 120 140 160 180 17.00 20.30 25.20 31.00 36.20 12 12 12 12 12 204.00 243.60 302.40 372.00 434.40 48202 48205 48206 48222 48225 48226 48242 48245 48246 48262 48265 48266 48282 48285 48286 HEA 200 HEA 200 HEA 200 HEA 220 HEA 220 HEA 220 HEA 240 HEA 240 HEA 240 HEA 260 HEA 260 HEA 260 HEA 280 HEA 280 HEA 280 43.10 43.10 43.10 51.50 51.50 51.50 61.50 61.50 61.50 69.60 69.60 69.60 77.90 77.90 77.90 12 15 20 12 15 20 12 15 20 12 15 20 12 15 20 517.20 646.50 862.00 618.00 772.50 1030.00 738.00 922.50 1230.00 835.20 1044.00 1392.00 934.80 1168.50 1558.00 178200 178220 178240 178260 178280 HEA HEA HEA HEA HEA 200 220 240 260 280 43.10 51.50 61.50 69.60 77.90 12 12 12 12 12 517.20 618.00 738.00 835.20 934.80 178300 178360 HEA 300 HEA 360 90.10 114.20 12 12 1081.20 1370.40 178400 178450 HEA 400 HEA 450 127.50 142.80 12 12 1530.00 1713.60 178500 178600 178700 HEA 500 HEA 600 HEA 700 158.10 181.60 209.00 12 12 12 1897.20 2179.20 2508.00 178800 178920 HEA 800 HEA 1000 228.50 277.00 12 12 2742.00 3324.00 48302 48305 48306 48322 48325 48326 48342 48346 48362 48365 48366 HEA 300 HEA 300 HEA 300 HEA 320 HEA 320 HEA 320 HEA 340 HEA 340 HEA 360 HEA 360 HEA 360 90.10 90.10 90.10 99.60 99.60 99.60 107.10 107.10 114.20 114.20 114.20 12 15 20 12 15 20 12 20 12 15 20 1081.20 1351.50 1802.00 1195.20 1494.00 1992.00 1285.20 2142.00 1370.40 1713.00 2284.00 48402 48405 48406 48452 48456 HEA 400 HEA 400 HEA 400 HEA 450 HEA 450 127.50 127.50 127.50 142.80 142.80 12 15 20 12 20 1530.00 1912.50 2550.00 1713.60 2856.00 48502 48506 HEA 500 HEA 500 158.10 158.10 12 20 1897.20 3162.00 48602 48606 HEA 600 HEA 600 181.60 181.60 12 20 2179.20 3632.00 HEA Profile no. Kg/m Lengths (m) Kg/Length Measurements in mm Surface Sectional Desig- nation area m2/m h b s t cm2 100 120 140 160 180 96 114 133 152 171 100 120 140 160 180 5 5 5,5 6,0 6 8 8 8,5 9 9,5 21,2 25,3 31,4 38,8 45,3 0,561 0,677 0,794 0,906 1,02 200 220 240 260 280 190 210 230 250 270 200 220 240 260 280 6,5 7 7,5 7,5 8 10 11 12 12,5 13 53,8 64,3 76,8 86,8 97,3 1,14 1,26 1,37 1,48 1,60 300 320 340 360 400 290 310 330 350 390 300 300 300 300 300 8,5 9 9,5 10 11 14 15,5 16,5 17,5 19,0 112 124 133 143 159 1,72 1,76 1,79 1,83 1,91 450 500 550 600 650 440 490 540 590 640 300 300 300 300 300 11,5 12 12,5 13 13,5 21,0 23,0 24,0 25,0 26,0 178 198 212 226 242 2,01 2,11 2,21 2,31 2,41 700 800 900 1000 690 790 890 990 300 300 300 300 14,5 15 16 16,5 27,0 28,0 30,0 31,0 260 286 320 347 2,50 2,70 2,90 3,10 www.norskstaal.no 25 STEEL Steel beams HEB S355J2 Steel beams HEB S355G11 + N/M Acc. to EN 10 025-2 Tolerances acc. to EN 10 034 Length tolerances -0/+100 mm Inspection certificate acc. to EN 10 204-3.1 NORSOK M-120 Rev.5, MDS Y-26, rev. 5 and acc. to NS-EN 10 225 Tolerances acc. to NS-EN 10 034 Length tolerances -0/+100 mm Chargenumber stamped on both ends Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 45 Article no. Profile no. Kg/m Lengths (m) Kg/Length 45102 45122 45125 45142 45145 45162 45165 45182 45185 45186 HEB 100 HEB 120 HEB 120 HEB 140 HEB 140 HEB 160 HEB 160 HEB 180 HEB 180 HEB 180 20.80 27.20 27.20 34.40 34.40 43.50 43.50 52.20 52.20 52.20 12 12 15 12 15 12 15 12 15 20 249.60 326.40 408.00 412.80 516.00 522.00 652.50 626.40 783.00 1044.00 45202 45205 45206 45222 45225 45226 45242 45245 45246 45262 45265 45266 45282 45285 45286 HEB 200 HEB 200 HEB 200 HEB 220 HEB 220 HEB 220 HEB 240 HEB 240 HEB 240 HEB 260 HEB 260 HEB 260 HEB 280 HEB 280 HEB 280 62.50 62.50 62.50 72.90 72.90 72.90 84.90 84.90 84.90 94.90 94.90 94.90 105.10 105.10 105.10 12 15 20 12 15 20 12 15 20 12 15 20 12 15 20 750.00 937.50 1250.00 874.80 1093.50 1458.00 1018.80 1273.50 1698.00 1138.80 1423.50 1898.00 1261.20 1576.50 2102.00 45302 45305 45306 45322 45325 45326 45342 45345 45346 45362 45365 45366 HEB 300 HEB 300 HEB 300 HEB 320 HEB 320 HEB 320 HEB 340 HEB 340 HEB 340 HEB 360 HEB 360 HEB 360 119.30 119.30 119.30 129.50 129.50 129.50 136.70 136.70 136.70 144.80 144.80 144.80 12 15 20 12 15 20 12 15 20 12 15 20 1431.60 1789.50 2386.00 1554.00 1942.50 2590.00 1640.40 2050.50 2734.00 1737.60 2172.00 2896.00 45402 45405 45406 45452 45455 45456 HEB 400 HEB 400 HEB 400 HEB 450 HEB 450 HEB 450 158.10 158.10 158.10 174.40 174.40 174.40 12 15 20 12 15 20 1897.20 2371.50 3162.00 2092.80 2616.00 3488.00 45502 45505 45506 HEB 500 HEB 500 HEB 500 190.70 190.70 190.70 12 15 20 2288.40 2860.50 3814.00 45602 45606 HEB 600 HEB 600 216.20 216.20 12 20 2594.40 4324.00 26 ARTICLE GROUP 180 Article no. Profile no. Kg/m Lengths (m) Kg/Length 180100 180120 180140 180160 180180 HEB HEB HEB HEB HEB 100 120 140 160 180 20.80 27.20 34.40 43.50 52.20 12 12 12 12 12 249.60 326.40 412.80 522.00 626.40 180200 180220 180240 180260 180280 HEB HEB HEB HEB HEB 200 220 240 260 280 62.50 72.90 84.90 94.90 105.10 12 12 12 12 12 750.00 874.80 1018.80 1138.80 1261.20 180300 180320 180340 180360 HEB HEB HEB HEB 300 320 340 360 119.30 129.50 136.70 144.80 12 12 12 12 1431.60 1554.00 1640.40 1737.60 180400 180450 HEB 400 HEB 450 158.10 174.40 12 12 1897.20 2092.80 180500 180550 HEB 500 HEB 550 190.70 203.00 12 12 2288.40 2436.00 180600 180650 HEB 600 HEB 650 216.20 229.50 12 12 2594.40 2754.00 180700 HEB 700 245.80 12 2949.60 180800 HEB 800 267.20 12 3206.40 180920 HEB 1000 320.30 12 3843.60 HEB Measurements in mm Surface Desig- Sectional nation area h b s t cm2 m2/m 100 100 100 6,0 10,0 26,0 0,567 120 120 120 6,5 11,0 34,0 0,686 140 140 140 7,0 12,0 43,0 0,805 160 160 160 8,0 13,0 54,3 0,918 180 180 180 8,5 14,0 65,3 1,04 200 220 240 260 280 200 220 240 260 280 200 220 240 260 280 9,0 9,5 10,0 10,0 10,5 15,0 16,0 17,0 17,5 18,0 78,1 91,0 106 118 131 1,15 1,27 1,38 1,50 1,62 300 320 340 360 300 320 340 360 300 300 300 300 11,0 11,5 12,0 12,5 19,0 20,5 21,5 22,5 149 161 171 181 1,73 1,77 1,81 1,85 400 450 500 550 600 400 450 500 550 600 300 300 300 300 300 13,5 14,0 14,5 15,0 15,5 24,0 26,0 28,0 29,0 30,0 198 218 239 254 270 1,93 2,03 2,12 2,22 2,32 650 700 800 900 1000 650 700 800 900 1000 300 300 300 300 300 16,0 17,0 17,5 18,5 19,0 31,0 32,0 33,0 35,0 36,0 286 306 334 371 400 2,42 2,52 2,71 2,91 3,11 www.norskstaal.no STEEL Cold formed welded circular hollow sections Hybox S355J2H Cold formed hollow sections Hybox S355J2H Acc. to EN 10 219-1 Tolerances acc. to EN 10 219-2 Inspection certificate EN 10 204-3.1 Acc. to EN 10 219-1 Unoiled Impact tested at -20 gr.C Tolerances acc. to EN 10 219-2 Length tolerances -0/+50 mm Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 218 ARTICLE GROUP 233 Article no. Lengths (m) Dimension Kg/m 218032 88,9 X 5,0 MM 10.30 12 218092 114,3 X 6,0 MM 16.03 12 218132 218142 218152 139,7 X 5,0 MM 139,7 X 6,0 MM 139,7 X 8,0 MM 16.60 19.78 25.98 12 12 12 218282 218292 218302 168,3 X 6,0 MM 168,3 X 8,0 MM 168,3 X 10,0 MM 24.02 31.63 39.04 12 12 12 218332 218342 218352 193,7 X 6,0 MM 193,7 X 8,0 MM 193,7 X 10,0 MM 27.80 36.60 45.30 12 12 12 218382 218392 218402 218412 219,1 X 6,0 MM 219,1 X 8,0 MM 219,1 X 10,0 MM 219,1 X 12,5 MM 31.53 41.65 51.57 63.69 12 12 12 12 218442 244,5 X 8,0 MM 46.70 12 218472 218482 218492 273,0 X 6,0 MM 273,0 X 8,0 MM 273,0 X 10,0 MM 39.50 52.28 64.86 12 12 12 218542 218552 218562 323,9 X 8,0 MM 323,9 X 10,0 MM 323,9 X 12,5 MM 62.32 77.41 95.99 12 12 12 218612 355,6 X 6,0 MM 51.70 12 Article no. Dimension Kg/m Lengths (m) 233300 30 X 30 X 3,00 MM 2.43 6 233310 233320 40 X 40 X 3,00 MM 40 X 40 X 4,00 MM 3.38 4.30 6 6 233330 233340 233342 233350 233352 50 X 50 X 3,00 MM 50 X 50 X 4,00 MM 50 X 50 X 4,00 MM 50 X 50 X 5,00 MM 50 X 50 X 5,00 MM 4.35 5.58 5.58 6.54 6.54 6 6 12 6 12 233360 233362 233370 233372 233380 233382 60 X 60 X 3,00 MM 60 X 60 X 3,00 MM 60 X 60 X 4,00 MM 60 X 60 X 4,00 MM 60 X 60 X 5,00 MM 60 X 60 X 5,00 MM 5.32 5.32 6.87 6.87 8.15 8.15 6 12 6 12 6 12 233390 233400 233402 233410 233412 70 X 70 X 3,00 MM 70 X 70 X 4,00 MM 70 X 70 X 4,00 MM 70 X 70 X 5,00 MM 70 X 70 X 5,00 MM 6.28 8.16 8.16 9.76 9.76 6 6 12 6 12 233420 233422 233430 233432 233440 233442 233460 233462 233762 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 3,00 MM 3,00 MM 4,00 MM 4,00 MM 5,00 MM 5,00 MM 6,00 MM 6,00 MM 8,00 MM 7.24 7.24 9.44 9.44 11.37 11.37 13.46 13.46 16.69 6 12 6 12 6 12 10 12 12 233470 233472 233482 90 X 90 X 4,00 MM 90 X 90 X 4,00 MM 90 X 90 X 5,00 MM 10.76 10.76 13.00 6 12 12 233490 233492 233500 233502 233512 233522 233540 233542 233782 100 X 100 X 3,00 MM 100 X 100 X 3,00 MM 100 X 100 X 4,00 MM 100 X 100 X 4,00 MM 100 X 100 X 5,00 MM 100 X 100 X 6,00 MM 100 X 100 X 8,00 MM 100 X 100 X 8,00 MM 100 X 100 X 10,00 MM 9.18 9.18 11.98 11.98 14.54 17.34 21.92 21.92 26.11 6 12 6 12 12 12 10 12 12 233792 233802 120 X 120 X 4,00 MM 120 X 120 X 6,00 MM 14.48 21.11 12 12 www.norskstaal.no 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 80 X 27 Article no. STEEL Dimension Kg/m Lengths (m) 233552 233572 233582 120 X 120 X 5,00 MM 120 X 120 X 8,00 MM 120 X 120 X 10,00 MM 17.82 27.04 31.84 12 12 12 233592 233812 233822 233832 140 X 140 X 5,00 MM 140 X 140 X 6,00 MM 140 X 140 X 8,00 MM 140 X 140 X 10,00 MM 20.69 24.52 31.43 38.12 12 12 12 12 233602 233842 233632 233642 150 X 150 X 5,00 MM 150 X 150 X 6,00 MM 150 X 150 X 8,00 MM 150 X 150 X 10,00 MM 22.64 26.93 34.72 42.30 12 12 12 12 233843 233852 233862 233872 160 X 160 X 5,00 MM 160 X 160 X 6,00 MM 160 X 160 X 8,00 MM 160 X 160 X 10,00 MM 23.83 28.29 36.46 44.40 12 12 12 12 233882 233892 233902 180 X 180 X 6,00 MM 180 X 180 X 8,00 MM 180 X 180 X 10,00 MM 32.74 42.33 51.71 12 12 12 233912 233922 233932 233682 233942 200 X 200 X 5,00 MM 200 X 200 X 6,00 MM 200 X 200 X 8,00 MM 200 X 200 X 10,00 MM 200 X 200 X 12,00 MM 30.70 36.52 47.43 58.38 67.32 12 12 12 12 12 233702 233972 233712 233982 250 X 250 X 8,00 MM 250 X 250 X 6,00 MM 250 X 250 X 10,00 MM 250 X 250 X 12,00 MM 60.53 46.10 74.46 86.50 233722 233732 300 X 300 X 8,00 MM 300 X 300 X 10,00 MM 233742 300 X 300 X 12,00 MM 236380 236390 236392 236402 236420 236430 236440 80 X 80 X 80 X 80 X 80 X 80 X 80 X 3,00 MM 4,00 MM 4,00 MM 5,00 MM 4,00 MM 5,00 MM 5,00 MM 5.32 6.87 6.87 8.13 7.28 8.76 9.57 6 6 12 12 6 6 6 236450 90 X 50 X 4,00 MM 8.16 6 40 X 40 X 50 X 50 X 50 X 50 X 50 X 50 X 50 X 60 X 60 X 60 X 80 X 3,00 MM 4,00 MM 3,00 MM 3,00 MM 4,00 MM 4,00 MM 5,00 MM 5,00 MM 6,00 MM 4,00 MM 5,00 MM 6,00 MM 5,00 MM 6.28 8.13 6.76 6.76 8.80 8.80 10.76 10.76 12.55 9.44 11.37 13.46 13.01 6 6 6 12 6 12 6 12 12 12 12 12 12 12 12 12 12 236542 236552 236562 236982 236572 236582 236760 236762 120 X 120 X 120 X 120 X 120 X 120 X 120 X 120 X 60 X 60 X 60 X 80 X 80 X 80 X 80 X 80 X 4,00 MM 5,00 MM 6,00 MM 4,00 MM 5,00 MM 6,00 MM 8,00 MM 8,00 MM 10.76 13.01 15.40 11.93 14.54 17.34 23.40 23.40 12 12 12 12 12 12 10 12 73.33 90.54 12 12 236792 236902 140 X 80 X 5,00 MM 140 X 80 X 6,00 MM 15.98 18.87 12 12 106.10 12 236612 236622 236642 150 X 100 X 5,00 MM 150 X 100 X 6,00 MM 150 X 100 X 8,00 MM 18.64 22.13 28.37 12 12 12 236652 236662 236672 160 X 80 X 5,00 MM 160 X 80 X 6,00 MM 160 X 80 X 8,00 MM 17.81 21.11 26.93 12 12 12 236722 236732 236822 236832 236032 236052 236072 200 X 100 X 5,00 MM 200 X 100 X 6,00 MM 200 X 100 X 8,00 MM 200 X 100 X 10,00 MM 200 X 120 X 6,00 MM 200 X 120 X 8,00 MM 200 X 120 X 10,00 MM 22.75 26.93 34.72 42.30 28.87 37.19 45.29 12 12 12 12 12 12 12 236102 236852 236112 250 X 150 X 6,00 MM 250 X 150 X 8,00 MM 250 X 150 X 10,00 MM 36.52 47.63 58.14 12 12 12 236152 236162 236172 300 X 200 X 6,00 MM 300 X 200 X 8,00 MM 300 X 200 X 10,00 MM 46.10 60.28 74.15 12 12 12 236202 236212 236222 400 X 200 X 8,00 MM 400 X 200 X 10,00 MM 400 X 200 X 12,00 MM 73.03 90.17 106.08 12 12 12 ARTICLE GROUP 236 Kg/m Lengths (m) 236320 236330 50 X 30 X 3,00 MM 50 X 30 X 4,00 MM 3.38 4.30 6 6 236340 236350 236352 60 X 40 X 3,00 MM 60 X 40 X 4,00 MM 60 X 40 X 4,00 MM 4.35 5.58 5.58 6 6 12 236360 70 X 40 X 3,00 MM 4.73 6 28 40 X 40 X 40 X 40 X 50 X 50 X 60 X Kg/m Lengths (m) 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X 100 X Acc. to EN 10 219-1 Unoiled Impact tested at -20 gr. C Tolerances acc. to EN 10 219-2 Length tolerances -0/+50 mm Inspection certificate EN 10 204-3.1 Dimension Dimension 236460 236465 236470 236472 236480 236482 236490 236492 236502 236512 236522 236752 236532 Cold formed hollow sections Hybox S355J2H Article no. Article no. www.norskstaal.no STEEL Hot formed hollow sections Celsius S355NH Article no. Acc. to EN 10 210-1 Outside corner radius 0,5 To 2,0 x t C max 0,16, CEV max 0,41 Impact tested for thickness 6 mm and above: min 40 Joule ved -20 gr.C Length tolerances -0/+150 mm. Remaining tolerances acc. to EN 10210-2 US testing of welded bead for thicknesses between 12 mm and 16 mm acc. to EN 10246-8 level U3, inside weld bead removed Inspection certificate acc. to EN 10 204-3.1 Dimension Kg/m Lengths (m) 52477 160 X 160 X 8,00 MM 37.90 52487 160 X 160 X 10,00 MM 46.70 12 12 454.80 560.40 52607 52617 52627 52632 52635 180 X 180 X 6,30 MM 180 X 180 X 8,00 MM 180 X 180 X 10,00 MM 180 X 180 X 12,50 MM 180 X 180 X 16,00 MM 34.90 43.90 54.10 65.70 81.80 12 12 12 12 12 418.80 526.80 649.20 788.40 981.60 52637 52647 52657 52667 52672 200 X 200 X 6,30 MM 200 X 200 X 8,00 MM 200 X 200 X 10,00 MM 200 X 200 X 12,50 MM 200 X 200 X 16,00 MM 39.00 49.00 60.50 74.50 93.30 12 12 12 12 12 468.00 588.00 726.00 894.00 1119.60 250 X 250 X 6,30 MM 49.10 250 X 250 X 8,00 MM 61.70 250 X 250 X 10,00 MM 76.50 250 X 250 X 12,50 MM 94.50 250 X 250 X 16,00 MM 119.34 12 12 12 12 12 589.20 740.40 918.00 1134.00 1432.10 52087 40 X 40 X 4,00 MM 4.56 12 54.70 52677 52687 52697 52707 52712 52097 52107 52117 50 X 50 X 3,20 MM 4.75 50 X 50 X 4,00 MM 5.83 50 X 50 X 5,00 MM 7.11 12 12 12 57.00 70.00 85.30 52717 300 X 300 X 10,00 MM 92.50 52727 300 X 300 X 12,50 MM 114.00 52817 300 X 300 X 16,00 MM 144.84 12 12 12 1110.00 1368.00 1738.10 52127 52137 52147 52151 52157 60 X 60 X 60 X 60 X 60 X 5.78 7.11 8.71 12.40 13.06 12 12 12 12 12 69.40 85.30 104.50 148.80 156.70 52737 350 X 350 X 10,00 MM 108.00 52747 350 X 350 X 12,50 MM 135.00 52827 350 X 350 X 16,00 MM 170.30 12 12 12 1296.00 1620.00 2043.60 52177 70 X 70 X 5,00 MM 10.30 12 123.60 52752 400 X 400 X 10,00 MM 124.50 52777 400 X 400 X 12,50 MM 155.00 52787 400 X 400 X 16,00 MM 195.80 12 12 12 1494.00 1860.00 2349.60 52197 52207 52217 52227 52247 52257 80 X 80 X 80 X 80 X 90 X 90 X ARTICLE GROUP 52 Article no. Dimension 60 X 60 X 60 X 60 X 60 X 80 X 80 X 80 X 80 X 90 X 90 X 3,20 MM 4,00 MM 5,00 MM 6,30 MM 8,00 MM Kg/mLengths (m)Kg/Length 3,60 MM 5,00 MM 6,30 MM 8,00 MM 5,00 MM 6,30 MM 8.76 11.90 14.70 18.20 13.60 16.70 12 12 12 12 12 12 105.10 142.80 176.40 218.40 163.20 200.40 52267 52277 52287 52297 52307 100 X 100 X 4,00 MM 100 X 100 X 5,00 MM 100 X 100 X 6,30 MM 100 X 100 X 8,00 MM 100 X 100 X 10,00 MM 12.20 15.10 18.80 23.40 28.50 12 12 12 12 12 146.40 181.20 225.60 280.80 342.00 52317 52327 52337 52347 120 X 120 X 5,00 MM 120 X 120 X 6,30 MM 120 X 120 X 8,00 MM 120 X 120 X 10,00 MM 18.40 22.70 28.50 34.90 12 12 12 12 220.80 272.40 342.00 418.80 52357 52367 52377 52387 140 X 140 X 5,00 MM 140 X 140 X 6,30 MM 140 X 140 X 8,00 MM 140 X 140 X 10,00 MM 21.50 26.80 33.60 41.20 12 12 12 12 258.00 321.60 403.20 494.40 52397 52407 52417 52427 52432 52447 150 X 150 X 5,00 MM 150 X 150 X 6,30 MM 150 X 150 X 8,00 MM 150 X 150 X 10,00 MM 150 X 150 X 12,50 MM 150 X 150 X 16,00 MM 23.20 28.90 36.10 44.50 54.50 66.50 12 12 12 12 12 12 278.40 346.80 433.20 534.00 654.00 798.00 52467 160 X 160 X 6,30 MM 30.30 12 363.60 www.norskstaal.no 29 STEEL Hot formed hollow sections Celsius S355NH Article no. Acc. to EN 10 210-1 Outside corner radius 0,5 To 2,0 x t C max 0,16, CEV max 0,41 Impact tested for thickness 6 mm and above: min. 40 Joule ved -20 gr.C Length tolerances -0/+150 mm. Remaining tolerances acc. to EN 10210-2 US testing of welded bead for thicknesses between 12 mm and 16 mm acc. to EN 10246-8 level U3, inside weld bead removed Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 53 Article no. Dimension 53047 60 X 40 X 4,00 MM Kg/mLengths (m)Kg/Length 5.83 12 70.00 53077 80 X 40 X 4,00 MM 7.11 53087 80 X 40 X 6,30 MM 10.50 12 12 85.30 126.00 53097 90 X 50 X 3,60 MM 7.61 12 91.30 53857 53727 53737 53747 53757 53817 Dimension Kg/m Lengths (m) 300 X 100 X 5,00 MM 31.10 300 X 200 X 6,30 MM 49.10 300 X 200 X 8,00 MM 61.70 300 X 200 X 10,00 MM 76.50 300 X 200 X 12,50 MM 94.50 300 X 200 X 16,00 MM 119.30 12 12 12 12 12 12 373.20 589.20 740.40 918.00 1134.00 1431.60 53767 400 X 200 X 10,00 MM 92.50 53777 400 X 200 X 12,50 MM 114.00 53827 400 X 200 X 16,00 MM 144.80 12 12 12 1110.00 1368.00 1737.60 53787 450 X 250 X 10,00 MM 108.00 53797 450 X 250 X 12,50 MM 135.00 53807 450 X 250 X 16,00 MM 169.30 12 12 12 1296.00 1620.00 2031.60 Centerless rounds/shafts SS2142 Tolerances acc. to ISO h8 and DIN 670, cold drawn and oiled Test report acc. to EN 10 204-2.2 ARTICLE GROUP 246 Article no. Dimension 246029 20 MM X Ø 2.51 6 246043 246050 246063 25 MM X Ø 30 MM X Ø 35 MM X Ø 3.93 5.66 7.70 6 6 6 246077 246084 40 MM X Ø 45 MM X Ø 10.10 12.70 6 6 246091 50 MM X Ø 15.70 6 246105 246112 60 MM X Ø 65 MM X Ø 22.60 26.60 6 6 246119 70 MM X Ø 30.80 6 246133 80 MM X Ø 40.20 6 246147 90 MM X Ø 50.90 6 246153 100 MM X Ø 62.90 6 246167 120 MM X Ø 90.50 6 53117 53127 53137 53147 53151 53167 53177 100 X 100 X 100 X 100 X 100 X 100 X 100 X 50 X 50 X 50 X 50 X 50 X 60 X 60 X 3,20 MM 4,00 MM 5,00 MM 6,30 MM 8,00 MM 5,00 MM 6,30 MM 7.32 9.04 11.10 13.70 16.90 11.90 14.70 12 12 12 12 12 12 12 87.80 108.50 133.20 164.40 202.80 142.80 176.40 53207 53217 53227 53237 53247 53257 120 X 120 X 120 X 120 X 120 X 120 X 60 X 5,00 MM 60 X 6,30 MM 80 X 5,00 MM 80 X 6,30 MM 80 X 8,00 MM 80 X 10,00 MM 13.60 16.70 15.10 18.80 23.40 28.50 12 12 12 12 12 12 163.20 200.40 181.20 225.60 280.80 342.00 53297 53307 53317 53327 150 X 100 X 5,00 MM 150 X 100 X 6,30 MM 150 X 100 X 8,00 MM 150 X 100 X 10,00 MM 19.10 23.80 29.70 36.40 12 12 12 12 229.20 285.60 356.40 436.80 53347 53357 53367 53377 160 X 160 X 160 X 160 X 80 X 5,00 MM 80 X 6,30 MM 80 X 8,00 MM 80 X 10,00 MM 18.40 22.70 28.50 34.90 12 12 12 12 220.80 272.40 342.00 418.80 53407 53417 53427 53437 53447 53451 53467 53477 53487 200 X 100 X 5,00 MM 200 X 100 X 6,30 MM 200 X 100 X 8,00 MM 200 X 100 X 10,00 MM 200 X 100 X 12,50 MM 200 X 100 X 16,00 MM 200 X 120 X 6,30 MM 200 X 120 X 8,00 MM 200 X 120 X 10,00 MM 23.20 28.90 36.10 44.50 54.50 66.50 30.30 38.58 46.70 12 12 12 12 12 12 12 12 12 278.40 346.80 433.20 534.00 654.00 798.00 363.60 463.00 560.40 53687 53697 53707 53717 30 250 X 150 X 6,30 MM 250 X 150 X 8,00 MM 250 X 150 X 10,00 MM 250 X 150 X 12,50 MM 39.00 49.00 60.50 74.50 12 12 12 12 468.00 588.00 726.00 894.00 www.norskstaal.no Kg/m Lengths (m) STEEL Cold formed channels S235JR Cold formed angles S235JR Acc. to EN 10 025-2 Tolerances acc. to EN 10 048, EN 10 051 and EN 10 162 Acc. to EN 10 025-2 Tolerances acc. to EN 10 048, EN 10 051 og EN 10 162 ARTICLE GROUP 203 Article no. Dimension ARTICLE GROUP 201 Kg/m Lengths (m) Article no. Dimension Kg/m Lengths (m) 203015 15 X 15 X 1,5 MM 0.48 6 201022 20 X 20 X 2 MM 0.58 6 203041 20 X 20 X 2,0 MM 0.85 6 201036 25 X 25 X 2 MM 0.73 6 203076 25 X 25 X 2,0 MM 1.09 6 201050 30 X 30 X 2 MM 0.91 6 203091 203095 30 X 30 X 2,0 MM 30 X 30 X 3,0 MM 1.34 1.90 6 6 203146 203154 203162 40 X 20 X 2,0 MM 40 X 40 X 2,0 MM 40 X 40 X 3,0 MM 1.17 1.82 2.64 6 6 6 201057 201071 201099 40 X 20 X 2 MM 40 X 40 X 2 MM 40 X 40 X 3 MM 0.91 1.22 1.80 6 6 6 201106 201113 50 X 50 X 3 MM 50 X 30 X 3 MM 2.26 1.80 6 6 203186 203194 203202 203210 50 X 30 X 3,0 MM 50 X 40 X 3,0 MM 50 X 50 X 3,0 MM 50 X 50 X 4,0 MM 2.40 2.88 3.37 4.39 6 6 6 6 201120 60 X 40 X 3 MM 2.26 6 201130 70 X 70 X 5 MM 5.23 6 203228 203236 60 X 30 X 3,0 MM 60 X 40 X 3,0 MM 2.64 3.12 6 6 201160 100 X 50 X 4 MM 4.59 6 203244 203268 70 X 30 X 3,0 MM 70 X 40 X 4,0 MM 2.88 4.37 6 6 203276 203291 203298 80 X 40 X 3,0 MM 80 X 40 X 4,0 MM 80 X 50 X 4,0 MM 3.59 4.66 5.27 6 6 6 203313 203321 203328 203344 100 X 50 X 3,0 MM 100 X 50 X 4,0 MM 100 X 50 X 6,0 MM 100 X 60 X 6,0 MM 4.55 5.92 8.56 9.41 6 6 6 6 203388 203396 120 X 50 X 4,0 MM 120 X 60 X 6,0 MM 6.58 10.50 6 6 203418 203426 140 X 60 X 4,0 MM 140 X 60 X 6,0 MM 7.85 11.40 6 6 203452 203459 203466 160 X 50 X 4,0 MM 160 X 60 X 5,0 MM 160 X 60 X 6,0 MM 7.81 10.40 12.30 6 6 6 203491 180 X 60 X 5,0 MM 11.20 6 203512 200 X 80 X 6,0 MM 16.10 6 Cold reduced steel sheet DC01AM Acc. to EN 10 130 Lightly oiled Tolerances acc. to EN 10 131 Delivered as single sheets or in approx. 2000 kgs envelopes Test report acc. to EN 10 204-2.2 ARTICLE GROUP 288 Article no. Dimension Kg/plate 288015 0,50 X 1000 X 2000 MM 8.00 288029 288036 0,70 X 1000 X 2000 MM 0,70 X 1250 X 2500 MM 11.20 17.50 288043 288050 0,90 X 1000 X 2000 MM 0,90 X 1250 X 2500 MM 14.40 22.50 288057 288064 288068 1,00 X 1000 X 2000 MM 1,00 X 1250 X 2500 MM 1,00 X 1500 X 3000 MM 16.00 25.00 36.00 288071 288077 288078 288079 288081 1,25 X 1000 X 2000 MM 1,25 X 1250 X 2158 MM 1,25 X 1250 X 2500 MM 1,25 X 1250 X 3000 MM 1,25 X 1500 X 3000 MM 20.00 26.98 31.30 37.50 45.00 288085 288088 288092 288099 1,50 X 1000 X 2000 MM 1,50 X 1250 X 2000 MM 1,50 X 1250 X 2500 MM 1,50 X 1500 X 3000 MM 24.00 30.00 37.50 54.00 www.norskstaal.no 31 Article no. STEEL Dimension Kg/m Lengths (m) 288120 288127 288131 2,00 X 1000 X 2000 MM 2,00 X 1250 X 2500 MM 2,00 X 1500 X 3000 MM 32.00 50.00 72.00 288134 288141 2,50 X 1000 X 2000 MM 2,50 X 1250 X 2500 MM 40.00 62.50 288162 288169 288173 3,00 X 1000 X 2000 MM 3,00 X 1250 X 2500 MM 3,00 X 1500 X 3000 MM 48.00 75.00 108.00 Hot dipped zinc coated steel plates DX51D+Z275 Acc. to EN 10 327 Zinc coating 275 g/m2 on both sides Chromated, small zinkroses Tolerances acc. to EN 10 143 Delivered as single sheets or in approx. 2000 kgs envelopes Test report acc. to EN 10 204-2.2 Article no. 308017 and 308034 are only sold in packages of 1000 kgs. ARTICLE GROUP 308 Article no. Dimension Kg/plate 308008 0,50 X 1000 X 2000 MM 8.00 308010 308011 308012 0,60 X 1000 X 2000 MM 0,60 X 1250 X 2000 MM 0,60 X 1250 X 2500 MM 9.60 12.00 15.00 308014 308015 308016 308017 308019 0,70 X 1250 X 2500 MM 0,70 X 1250 X 2000 MM 0,70 X 1000 X 2000 MM 0,70 X 1500 X 3000 MM 0,70 X 1250 X 3000 MM 17.50 14.00 11.20 25.20 21.00 308028 308031 308032 308033 308034 0,90 X 1000 X 2000 MM 0,90 X 1250 X 2000 MM 0,90 X 1250 X 3000 MM 0,90 X 1250 X 2500 MM 0,90 X 1500 X 3000 MM 14.40 18.00 27.00 22.50 32.40 308036 308043 1,00 X 1000 X 2000 MM 1,00 X 1250 X 2500 MM 16.00 25.00 308050 308055 308057 308059 1,25 X 1000 X 2000 MM 1,25 X 1250 X 2000 MM 1,25 X 1250 X 2500 MM 1,25 X 1250 X 3000 MM 20.00 25.00 31.30 37.50 308061 308062 308063 308064 1,50 X 1000 X 2000 MM 1,50 X 1250 X 2500 MM 1,50 X 1250 X 2000 MM 1,50 X 1250 X 2200 MM 24.00 37.50 30.00 33.00 308078 308083 308085 308092 308094 2,00 X 1000 X 2000 MM 2,00 X 1250 X 2000 MM 2,00 X 1250 X 2500 MM 2,50 X 1000 X 2000 MM 2,50 X 1250 X 2500 MM 308096 308099 32 Electrolytic zinc coated steel sheet DC01+ZE 25/25AP Acc. to EN 10 152 Chromated, zink coating min. 2,5 my on both sides Tolerances acc. to EN 10 131 Delivered as single sheets or in approx. 2000 kgs envelopes Test report acc. to EN 10 204-2.2 ARTICLE GROUP 305 Article no. Dimension Kg/plate 305015 305018 0,70 X 1000 X 2000 MM 0,70 X 1250 X 2500 MM 11.20 17.50 305022 305026 0,90 X 1000 X 2000 MM 0,90 X 1250 X 2500 MM 14.40 22.50 305029 305034 1,00 X 1000 X 2000 MM 1,00 X 1250 X 2500 MM 16.00 25.00 305036 1,25 X 1000 X 2000 MM 20.00 305043 305045 1,50 X 1000 X 2000 MM 1,50 X 1250 X 2500 MM 24.00 37.50 305050 305059 2,00 X 1000 X 2000 MM 2,00 X 1250 X 2500 MM 32.00 50.00 Aluzink, aluminium/zink-coated steel plates DX51D+AZ 150 Acc. to EN 10 327 Zinc coating and aluminium 150 g/m2 on both sides Tolerances acc. to EN 10 143 Delivered as single sheet or in approx. 2000 kgs envelopes Test report acct. to EN 10 204-2.2 ARTICLE GROUP 307 Article no. Dimension Kg/plate 307005 307008 307009 307010 0,50 X 1000 X 2000 MM 0,70 X 1000 X 2000 MM 0,70 X 1250 X 2000 MM 0,70 X 1250 X 2500 MM 8.00 11.20 14.00 17.50 307015 307020 0,90 X 1000 X 2000 MM 0,90 X 1250 X 2500 MM 14.40 22.50 307024 307025 307027 307028 1,00 X 1000 X 2000 MM 1,00 X 1000 X 2000 MM 1,00 X 1250 X 2500 MM 1,00 X 1250 X 2500 MM 16.00 16.00 25.00 25.00 307032 307035 307037 1,25 X 1000 X 2000 MM 1,25 X 1250 X 2500 MM 1,25 X 1500 X 3000 MM 20.00 31.25 45.00 32.00 40.00 50.00 40.00 62.50 307039 307040 307042 307045 1,50 X 1000 X 2000 MM 1,50 X 1250 X 2000 MM 1,50 X 1250 X 2500 MM 1,50 X 1500 X 3000 MM 24.00 30.00 37.50 54.00 3,00 X 1000 X 2000 MM 48.00 3,00 X 1250 X 2500 MM 75.00 307060 307064 307065 307067 2,00 X 1000 X 2000 MM 2,00 X 1250 X 2200 MM 2,00 X 1250 X 2500 MM 2,00 X 1500 X 3000 MM 32.00 44.00 50.00 72.00 www.norskstaal.no STEEL Expamet Expanded Metal First figure in size indicate direction of mesh. For example sheet 2440 mm LW x 1220 SW or sheet 1220 mm LW x 2440 mm LW denotes long way (LW) of mesh dimension. SW denotes short way of mesh dimension. Mesh dimensions: For flattened meshes dimensions of aperture point to point inside the mesh For conventional meshes with angled dimensions from center of knuckles ARTICLE GROUP 345 Expamet no. Size Mesh length Mesh x size/ Mesh width opening mm mm Strands width Total Open x heigth area thickness mm Approx % Approx. mm approx Kg/pc.approx. Kg/m2 Article no. 0,8 x 0,6 mesh Steel, untreated 220 1220 x 1220 Flattened Steel, untreated 1280F 2074F 2074F 2490F (2489F) 3394F 710F 2440 x 1220 1200 x 2000 1200 x 2400 1220 x 2440 1220 x 2440 1220 x 2440 25 x 7 40 x 19 40 x 19 47 x 15 70 x 37 70 x 38 2,4 x 1,1 4,6 x 2,6 4,6 x 2,6 6,6 x 4,3 5,5 x 2,2 4,7 x 2,7 10,8 18,2 21,7 45,2 11,9 14,7 Flattened Steel, galv. N6664F 0647F 2074F 2074F 2074F N7367FG N7367FG 1059F 1250 x 2500 1220 x 2440 1000 x 2000 1200 x 2000 1200 x 2400 1200 x 2000 1200 x 2400 2400 x 1200 8 x 6,5 35 x 12 40 x 19 40 x 19 40 x 19 40 x 19 40 x 19 76 x 34 Conventional light meshes Steel, untreated 1196* 1595* 2091* 2498 2440 x 1220 2440 x 1220 2440 x 1220 2440 x 1220 3092* 3092* Conventional heavy meshes Steel, untreated 1292 1576/0321 1576/0321 1576/0321 1576/0321 1576/0321 2491 2491 2491 2491 2492 (77) 2492 (77) 2492 (77) 4593 (72) 4593 (72) 4898 Steel, galv. 2492 (77) 1) 2) 3) 2,1 345180 57 3,7 60 7,6 60 7,6 53 15,2 75 4,0 75 4,9 345270 345069 345071 345350 345110 345220 1,4 x 0,7 2,3 x 1,2 4,6 x 2,6 4,6 x 2,6 4,6 x 2,6 4,3 x 3,7 4,3 x 3,7 6,0 x 4,5 8,1 49 2,6 8,6 71 2,9 16,8 60 8,4 20,2 60 8,4 24,2 60 8,4 24,14 10,1 29,00 10,1 39,7 67 13,8 345500 345210 345068 345070 345074 355560 355570 345250 28 x 9 38 x 17 50 x 22 60 x 25 2,0 x 1,2 3,1 x 1,6 2,5 x 2,5 3,1 x 3,0 3,6 5,4 5,2 6,4 11,6 13,6 13,1 18,7 3,9 4,6 4,4 6,3 345260 345038 345340 345360 1220 x 1830 2440 x 1220 76 x 33 76 x 33 3,6 x 3,0 3,6 x 3,0 7,0 11,1 7,0 14,8 5,0 5,0 345390 345400 1220 x 1525 900 x 2000 1000 x 2000 1200 x 2000 1500 x 2000 600 x 400 1000 x 2285 1200 x 2285 1500 x 2285 2000 x 2285 30 x 12 38 x 17 38 x 17 38 x 17 38 x 17 38 x 17 60 x 25 60 x 25 60 x 25 60 x 25 4,7 x 2,5 4,8 x 3,0 4,8 x 3,0 4,8 x 3,0 4,8 x 3,0 4,8 x 3,0 6,1 x 3,0 6,1 x 3,0 6,1 x 3,0 6,1 x 3,0 7,1 6,3 6,3 6,3 6,3 6,3 10,0 10,0 10,0 10,0 14,7 13,2 13,2 13,2 13,2 13,22 11,3 11,3 11,3 11,3 345280 345300 345305 345310 345315 345295 345051 345052 345060 345063 2) 1000 x 2000 1300 x 2000 2440 x 2000 60 x 25 60 x 25 60 x 25 6,1 x 4,5 6,1 x 4,5 6,1 x 4,5 11,5 34,0 11,5 44,2 11,5 83,0 17,0 17,0 17,0 345022 345025 345026 2) 2440 x 2000 1000 x 2000 2440 x 1220 115 x 40 115 x 40 121 x 34 8,0 x 4,5 8,0 x 4,5 9,5 x 4,5 15,4 66,9 15,4 27,4 16,5 58,9 13,7 13,7 19,8 345014 345015 345440 1000 x 2000 60 x 25 6,1 x 4,5 11,5 37,4 18,7 345020 1) 3) 3) 2) 6 x 3,5 1,3 3,1 27,3 23,8 26,4 31,7 39,6 3,2 25,8 31,0 38,7 51,6 N6664F. (EXPERF), flattened with mesh opeing like perforated sheets. Strandthickness = nominal thickness before flattening Typical for walkways Reservation for smaller deviation on mesh-size and strands www.norskstaal.no 33 STEELSHEETS Small STEEL Gratings for offshore This S-type stops ball with a 15 mm diameter acc. to security rule from the Labour Inspectorate and Norwegian Petroleum Directorate Serrated load bearing bars for improved grip and extra rounds between the load bearing bars G= hot dipped - galvanized (weigth incl. galvanization) U= Untreated (not galvanized) First figure in size indicate direction of load bearing bars ARTICLE GROUP 355 Article no. Size/Mesh/Load bearing bar all in mm pcs Kg/m2 355100 355120 355130 355140 355150 355170 355180 355190 6100 X 1000 MM S38 X 101 25 X 5U 6100 X 1000 MM S38 X 101 30 X 5U 6100 X 1000 MM S38 X 101 35 X 5U 6100 X 1000 MM S38 X 101 50 X 5U 6100 X 1000 MM S38 X 101 25 X 5G 6100 X 1000 MM S38 X 101 30 X 5G 6100 X 1000 MM S38 X 101 35 X 5G 6100 X 1000 MM S38 X 101 50 X 5G 205.00 230.00 260.00 369.00 220.00 247.00 280.00 396.00 33,60 37,47 42,62 60,49 36,06 40,49 45,90 64,92 34 www.norskstaal.no ALUMINIUM Aluminium sheet Aluminium sheets From and including 8 mm the following applies Mecanical values as rolled Inspection certificate acc. to EN 10 204-3.1 EN AW 1050 A/1200-H14/H24 EN AW 5052/5754-H24/H34 ARTICLE GROUP 731 ARTICLE GROUP 724 Article no. Dimension Kg/plate Article no. Dimension Kg/plate 731015 0,75 X 1000 X 2000 MM 4.20 731022 731036 731040 1,00 X 1000 X 2000 MM 1,00 X 1250 X 2500 MM 1,00 X 1500 X 3000 MM 5.60 8.75 12.60 7.00 10.95 731043 731050 731053 1,25 X 1000 X 2000 MM 1,25 X 1250 X 2500 MM 1,25 X 1500 X 3000 MM 7.00 10.95 15.75 1,50 X 1000 X 2000 MM 1,50 X 1250 X 2500 MM 1,50 X 1500 X 3000 MM 8.40 13.13 18.90 731057 731059 731062 1,50 X 1000 X 2000 MM 1,50 X 1250 X 2500 MM 1,50 X 1500 X 3000 MM 8.40 13.13 18.90 724092 724099 724110 2,00 X 1000 X 2000 MM 2,00 X 1250 X 2500 MM 2,00 X 1500 X 3000 MM 11.20 17.30 25.20 724113 724115 2,50 X 1000 X 2000 MM 2,50 X 1250 X 2500 MM 14.00 21.88 731064 731065 731068 731078 2,00 X 1000 X 2000 MM 2,00 X 1000 X 3000 MM 2,00 X 1250 X 2500 MM 2,00 X 1500 X 3000 MM 11.20 16.80 17.50 25.20 724120 724127 3,00 X 1000 X 2000 MM 3,00 X 1250 X 2500 MM 16.80 26.25 724134 724138 4,00 X 1000 X 2000 MM 4,00 X 1250 X 2500 MM 22.40 35.00 724141 5,00 X 1000 X 2000 MM 28.00 ARTICLE GROUP 730 724148 6,00 X 1000 X 2000 MM 33.60 Article no. 724162 10,00 X 1000 X 2000 MM 56.00 730008 730013 730015 2,50 X 1000 X 2000 MM 2,50 X 1250 X 2500 MM 2,50 X 1500 X 3000 MM 14.00 21.90 31.50 730021 730022 730025 730027 730029 3,00 X 1000 X 3000 MM 3,00 X 1000 X 2000 MM 3,00 X 1250 X 2500 MM 3,00 X 1250 X 3000 MM 3,00 X 1500 X 3000 MM 25.20 16.80 26.25 31.50 37.80 730036 730038 730039 4,00 X 1000 X 2000 MM 4,00 X 1250 X 2500 MM 4,00 X 1500 X 3000 MM 22.40 35.00 50.40 730050 730057 730059 5,00 X 1000 X 2000 MM 5,00 X 1250 X 2500 MM 5,00 X 1500 X 3000 MM 28.00 43.75 63.00 730064 730066 730069 6,00 X 1000 X 2000 MM 6,00 X 1250 X 2500 MM 6,00 X 1500 X 3000 MM 33.60 52.50 75.60 730085 8,00 X 1000 X 2000 MM 44.80 730099 730102 10,00 X 1000 X 2000 MM 10,00 X 1250 X 2500 MM 56.00 87.50 724008 724019 0,50 X 1000 X 2000 MM 0,70 X 1000 X 2000 MM 2.80 3.82 724036 724043 1,00 X 1000 X 2000 MM 1,00 X 1250 X 2500 MM 5.60 8.75 724050 724057 1,25 X 1000 X 2000 MM 1,25 X 1250 X 2500 MM 724071 724078 724090 Aluminium sheets EN AW 5052/5754-H22/H32 the above applies to thicknesses up and including 6 mm For thicknesses higher than and including 8 mm: 0/H111 Inspection certificate acc. to EN 10 204-3.1 www.norskstaal.no Dimension Kg/plate 35 Aluminium ALUMINIUM Article no. Dimension Kg/plate 730113 12,00 X 1000 X 2000 MM 67.20 730117 730120 15,00 X 1000 X 2000 MM 15,00 X 1250 X 2500 MM 84.00 131.25 730141 730155 20,00 X 1000 X 2000 MM 25,00 X 1000 X 2000 MM 112.00 140.00 Article no. Dimension Kg/plate 733036 733038 8,00 X 2000 X 5000 MM 8,00 X 2000 X 6000 MM 220.00 264.00 733043 10,00 X 2000 X 5000 MM 275.00 Aluminium ship-plates EN AW 5083 H116/H321 Aluminium tread plates Inspection certificate acc. to EN 10 024-3.2-DNV EN AW 5052/5754 H111/H114 ARTICLE GROUP 734 Inspection certificate acc. to EN 10 204-3.1 Article no. ARTICLE GROUP 732 Article no. Dimension Kg/plate Dimension Kg/plate 734010 734016 734018 3 X 2000 X 5000 MM 4 X 2000 X 5000 MM 5 X 2000 X 5000 MM 84.00 112.00 138.00 734023 734029 734033 6 X 2000 X 5000 MM 7 X 2000 X 5000 MM 8 X 2000 X 5000 MM 165.00 192.00 220.00 734043 734053 734060 10 X 2000 X 5000 MM 12 X 2000 X 5000 MM 15 X 2000 X 5000 MM 275.00 330.00 413.00 734070 734080 734090 20 X 2000 X 5000 MM 25 X 2000 X 5000 MM 30 X 2000 X 5000 MM 550.00 687.00 825.00 732008 732011 732013 732014 3 X 1000 X 3000 MM ONE BAR 3 X 1000 X 4000 MM ONE BAR 3 X 1250 X 2500 MM FIVE BAR 3 X 1500 X 3000 MM FIVE BAR 27.00 36.00 27.30 38.00 732015 732022 732024 732026 732028 4 X 1000 X 2000 MM ONE BAR 4 X 1000 X 4000 MM ONE BAR 4 X 1000 X 4000 MM FIVE BAR 4 X 1250 X 2500 MM FIVE BAR 4 X 1500 X 3000 MM FIVE BAR 24.50 49.50 49.50 36.40 52.50 732029 732036 732039 732041 732042 5 X 1000 X 2000 MM ONE BAR 5 X 1000 X 4000 MM ONE BAR 5 X 1000 X 4000 MM FIVE BAR 5 X 1250 X 2500 MM FIVE BAR 5 X 1500 X 3000 MM FIVE BAR 29.50 59.00 59.00 46.83 67.50 732043 732044 6 X 1000 X 4000 MM ONE BAR 6 X 1000 X 4000 MM FIVE BAR 69.50 69.00 ARTICLE GROUP 712 732050 7 X 1000 X 4000 MM ONE BAR 79.00 Article no. Dimension 712008 712013 712022 712023 10 MM X Ø 12 MM X Ø 16 MM X Ø 16 MM X Ø 0.21 0.30 0.55 0.55 5 5 5 6 712029 712030 712043 712044 712050 712051 20 MM X Ø 20 MM X Ø 25 MM X Ø 25 MM X Ø 30 MM X Ø 30 MM X Ø 0.86 0.86 1.34 1.34 1.93 1.93 5 6 5 6 5 6 712071 712072 712078 712079 712085 40 MM X Ø 40 MM X Ø 50 MM X Ø 50 MM X Ø 60 MM X Ø 3.52 3.52 5.50 5.50 7.92 5 6 5 6 5 712092 712099 712113 70 MM X Ø 80 MM X Ø 100 MM X Ø 10.78 14.07 22.00 5 5 3.5 Aluminium ship-plates EN AW 5052/5754-H24/H34 Inspection certificate acc. to EN 10 204-3.2-DNV ARTICLE GROUP 733 Article no. Dimension Kg/plate 733008 733010 4,00 X 2000 X 5000 MM 4,00 X 2000 X 6000 MM 112.00 134.40 733015 733018 5,00 X 2000 X 5000 MM 5,00 X 2000 X 6000 MM 138.00 165.50 733022 733024 6,00 X 2000 X 5000 MM 6,00 X 2000 X 6000 MM 165.00 198.00 733029 733031 7,00 X 2000 X 5000 MM 7,00 X 2000 X 6000 MM 192.00 230.40 36 Aluminium round bars/shafts EN AW 6082-T6 Inspection certificate acc. to EN 10 204-3.1 www.norskstaal.no Kg/mLengths (mm) ALUMINIUM Article no. Dimension Kg/plate Article no. Dimension Kg/plate 712134 130 MM X Ø 37.15 3.5 768130 120 X 8 MM 2.72 5 712150 712160 712170 712180 712200 150 MM X Ø 160 MM X Ø 170 MM X Ø 180 MM X Ø 200 MM X Ø 49.46 56.30 63.52 71.20 88.00 3.5 3.5 3.5 3.5 3.5 712220 712230 712250 220 MM X Ø 230 MM X Ø 250 MM X Ø 106.40 116.30 137.40 3.5 3.5 3.5 768132 768134 768141 768155 768156 768162 768163 768164 768165 768169 768170 768171 768172 768173 768174 40 X 10 MM 50 X 10 MM 60 X 10 MM 75 X 10 MM 75 X 10 MM 100 X 10 MM 100 X 10 MM 120 X 10 MM 120 X 10 MM 150 X 10 MM 150 X 10 MM 200 X 10 MM 200 X 10 MM 250 X 10 MM 250 X 10 MM 1.12 1.40 1.68 2.10 2.10 2.80 2.80 3.36 3.36 4.20 4.20 5.60 5.60 7.00 7.00 5 5 5 5 6 5 6 5 6 5 6 5 6 5 6 768176 768178 768182 100 X 12 MM 120 X 12 MM 150 X 12 MM 3.36 4.04 5.04 5 5 5 768184 768186 768187 768188 768189 768190 768191 768192 60 X 15 MM 80 X 15 MM 80 X 15 MM 100 X 15 MM 100 X 15 MM 120 X 15 MM 200 X 15 MM 150 X 15 MM 2.52 3.36 3.36 4.10 4.10 5.04 8.40 6.30 5 5 6 6 5 5 5 5 768193 768194 768195 768197 768199 768200 768201 768250 40 X 20 MM 50 X 20 MM 60 X 20 MM 100 X 20 MM 100 X 20 MM 150 X 20 MM 150 X 20 MM 200 X 20 MM 2.24 2.80 3.35 5.60 5.60 8.40 8.40 11.20 5 5 5 5 6 5 6 5 768300 60 X 30 MM 5.04 5 Aluminium flats EN AW 6082-T6 Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 768 Article no. Dimension Kg/m Lengths (m) 768005 30 X 2 MM 0.17 5 768007 768008 768015 768022 15 X 20 X 25 X 30 X 3 MM 3 MM 3 MM 3 MM 0.13 0.17 0.21 0.26 5 5 5 5 768032 40 X 4 MM 0.45 5 768036 768043 768044 768050 768051 768057 768058 768059 768060 25 X 30 X 30 X 40 X 40 X 50 X 60 X 50 X 100 X 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 5 MM 0.35 0.42 0.42 0.56 0.56 0.70 0.84 0.70 1.36 5 5 6 5 6 5 5 6 5 768061 768064 768071 768078 768079 768085 768088 768092 768093 768095 25 X 30 X 40 X 50 X 50 X 60 X 65 X 75 X 75 X 100 X 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 0.42 0.51 0.68 0.84 0.84 1.01 1.10 1.26 1.26 1.62 5 5 5 5 6 5 5 5 6 5 768098 768099 768106 768107 768113 768114 768120 768126 768127 768128 768129 25 X 30 X 40 X 40 X 50 X 50 X 60 X 75 X 75 X 100 X 100 X 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 0.56 0.68 0.90 0.90 1.12 1.12 1.35 1.68 1.68 2.24 2.24 5 5 5 6 5 6 5 6 5 5 6 Aluminium equal angles EN AW 6082-T6 Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 771 Article no. Dimension Kg/m Lengths (m) 771004 771006 15 X 15 X 2 MM 20 X 20 X 2 MM 0.16 0.22 5 5 771008 771015 771029 771030 20 X 25 X 30 X 30 X 3 MM 3 MM 3 MM 3 MM 0.31 0.40 0.48 0.48 5 5 5 6 771036 771037 40 X 40 X 4 MM 40 X 40 X 4 MM 0.86 0.86 5 6 www.norskstaal.no 20 X 25 X 30 X 30 X 37 ALUMINIUM Article no. Dimension Kg/plate 771033 771043 771044 771057 771058 30 X 40 X 40 X 50 X 50 X 30 X 40 X 40 X 50 X 50 X 5 MM 5 MM 5 MM 5 MM 5 MM 0.78 1.05 1.05 1.33 1.33 5 5 6 5 6 771064 771065 771088 771089 771092 50 X 50 X 60 X 60 X 65 X 50 X 50 X 60 X 60 X 65 X 6 MM 6 MM 6 MM 6 MM 6 MM 1.58 1.58 1.92 1.92 2.09 5 6 5 6 5 771099 771100 65 X 65 X 8 MM 65 X 65 X 8 MM 2.74 2.74 5 6 771125 771126 75 X 75 X 9 MM 75 X 75 X 9 MM 3.56 3.56 5 6 771150 771151 100 X 100 X 10 MM 100 X 100 X 10 MM 5.32 5.32 5 6 Article no. 772050 772057 772059 772060 772062 100 X 125 X 130 X 130 X 150 X 9 MM 9 MM 9 MM 9 MM 9 MM 3.94 4.75 4.94 4.94 5.45 5 5 5 6 5 772064 772065 772100 150 X 100 X 10 MM 150 X 100 X 10 MM 200 X 100 X 10 MM 6.72 6.72 8.12 5 6 5 Aluminium steel explosive welded transition joints Inspection certificate acc. to EN 10 204-3.1 Ultrasonic tested Steel: SS 2134 Aluminium: SS 4007 Aluminium: SS 4140 Article no. EN AW 6082-T6 745030 Inspection certificate acc. to EN 10 204-3.1 ARTICLE GROUP 772 Dimension Kg/m Lengths (mm) 772004 772006 40 X 20 X 2 MM 40 X 25 X 2 MM 0.31 0.36 5 5 772008 772012 772015 772016 50 X 60 X 60 X 60 X 40 X 30 X 40 X 40 X 5 MM 5 MM 5 MM 5 MM 1.20 1.20 1.31 1.31 5 5 5 6 772022 772023 772028 772029 772034 772036 772043 65 X 65 X 75 X 75 X 100 X 100 X 100 X 50 X 50 X 50 X 50 X 50 X 50 X 65 X 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 6 MM 1.84 1.84 2.00 2.00 2.42 2.42 2.69 5 6 6 5 6 5 5 772030 772031 772035 772037 75 X 75 X 100 X 100 X 50 X 50 X 50 X 50 X 7 MM 7 MM 7 MM 7 MM 2.32 2.32 2.81 2.81 5 6 6 5 772032 772033 772038 772039 772046 772047 772055 772058 75 X 75 X 100 X 100 X 100 X 100 X 100 X 130 X 50 X 50 X 50 X 50 X 65 X 65 X 75 X 65 X 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 8 MM 2.62 2.62 3.18 3.18 3.52 3.52 3.70 4.19 5 6 5 6 5 6 5 5 38 65 X 75 X 75 X 75 X 75 X Kg/plate ARTICLE GROUP 745 Aluminium unequal angles Article no. Dimension www.norskstaal.no Dimension 28 X (20+3+10) Kg/m 5.40 TABLES - STEEL EUROPEAN - STANDARD (EN) Structural steel in accordance with European standard (EN) Principle symbols Additional symbols for steell Additional symbols for steel products G S n n n an ..…………....... + an + an ....…….. Principle symbols Letter n = numerical an = alphanumerical Additional symbols Mecanical Group 1 Group 2 properties G = nnn = min. for structural steell: cast yield strength steel Re (mpa) Impact toughness in Test for the J (Joules) temp. smallest 27 J 40 J 60 J °C thickness- C = Special cold forming S= range JR KR LR 20 D = Hot dip coating structural JO KO LO 0 E = Enamelling steel J 2 K 2 L 2 –20 F = Forging *) J 3 K 3 L 3 –30 H = Hollow sections J 4 K 4 L 4 –40 L = Low temperature J 5 K 5 L 5 –50 M = Thermomechanically rolled J 6 K 6 L 6 –60 N = Normalized or normalized rolled O = Offshore P = Steel for sheet piling M = thermomechanically rolled Q = Quenched and tempered N = normalized or S = Shipbuilding N = normalized rolled T = Tubes Q = quenched and tempered W = Weather resistant For steelproducts Definition *) Other letters will be used for other steel qualities. Additional symbols will also change. Refer to EN 10 027-1 and EN 10 027-2 and circular IC 10 for additional information. TABLES Example on quality designation in accordance to NS-EN 10 025 (see the following pages) Copyright. www.norskstaal.no 39 TABLES - STEEL Tabels: Compares new European standards and earlier national standards (the qualities are not directly comparable). Nearest corresponding ASTM-standard and DNV/Loyds standards. Nearest corresponding brandstandard. For guiding purposes a simplified extract of EN-standards where the thickness validity are t>=3 mm for tensile strength and t>=16 mm for yield strength. Data are non-committal and are only guidelines. For complete data, please see the original standars. Common European standard (EN) All EU and EFTA countries have committed themselves to implement as a national standard all EN standard that is approved by qualified majority in the European standardisation organisation CEN. An approved EN-standard supersede previous national standards. As an example, quality S235JR will have the same term in e.g. Norway, Sweden and UK with reference to the national standards, NS-EN 10025, SS-EN 10025 og BS-EN 10025. Abbreviation: EN = Approved European standard, NS-EN = Norwegian standard, pr EN = Preliminary European standard Norm EN 10025-2 NON ALLOYED STEEL Norm EN 10025-3 NORMALIZED FINE GRAIN STEEL EN 10025-4 THERMOME- CANICALLY ROLLED FINE GRAIN STEEL 40 Yield strength Tensile strength Impact toughness NS-EN 3) NS-EN 1) NS-EN 1) ReH N/mm² Rm N/mm² KV J t ºC 10025-2 2005 10025 1993 10025 1991 185 290-510 235 235 235 235 235 235 340-470 340-470 360-510 360-510 340-470 360-510 27 27 27 27 27 27 20 20 20 0 -20 -20 275 275 275 275 410-560 410-560 410-560 410-560 27 27 27 27 20 0 -20 -20 S275JR S275JO 355 355 355 470-630 470-630 490-630 27 27 27 355 355 355 470-630 490-630 470-630 27 40 40 20 0 -20 -40 -20 -20 -20 295 DIN 1) SS 1) 17 100 S185 Fe310-0 St 33 1300-00 Fe 360 B Fe 360 BFU Fe 360 BFN Fe 360C Fe 360 D1 Fe 360 D2 St 37-2 USt 37-2 RSt 37-2 St 37-3U St 37-3N 1311-00 S235JR S235JO S235JR S235JRG1 S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 Fe 430 B Fe 430 C Fe 430 D1 Fe 430 D2 St 44-2 St 44-3 U St 44-3 N S355JR S355JO S355JR S355JO S355J2G3 Fe 510 B Fe 510 C Fe 510 D1 S355J2 S355K2 S355J2G4 S355K2G3 S355K2G4 Fe 510 D2 Fe 510 DD1 Fe 510 DD2 470-610 E295 E295 Fe 490-2 St 50-2 1550-00 1550-01 335 570-710 E335 E335 Fe 590-2 St 60-2 1650-00 1650-01 360 670-830 E360 E360 Fe 690-2 St 70-2 1655-00 450 550-720 27 0 S450JO Yield strength Tensile strengtht Impact toughness NS-EN NS-EN 1) NS ReH N/mm² Rm N/mm² KV J t ºC 10025 januar 2005 10113 1993 12536 12542 12546 275 275 355 355 420 420 460 460 370-510 370-510 450-610 470-630 520-680 520-680 540-720 540-720 40 27 40 27 40 27 40 27 -20 -50 -20 -50 -20 -50 -20 -50 S275N S275NL S355N S355NL S420N S420NL S460N S460NL S275N S275NL S355N S355NL S420N S420NL S460N S460NL 275 275 355 355 420 420 460 460 370-530 370-530 470-630 470-630 520-680 520-680 540-720 540-720 40 27 40 27 40 27 40 27 -20 -50 -20 -50 -20 -50 -20 -50 S275M S275ML S355M S355ML S420M S420ML S460M S460ML S275M S275ML S355M S355ML S420M S420ML S460M S460ML S275J2 St 52-3 U St 52-3 N DNV Lloyds Brandnames A/E DOMEX 240YP 4360 S185 S235J2 ASTM BS 1) A 283 Gr.C 1312-00 40B 40C 40D A 284C A 36 A 573-58 A 573-65 NVA/NVE 1412-00 43B 43C 43D A 573-70 A 633A NVA 27 NVA 27 1414-00 1414-01 2172-00 2174-01 50B 50C 50D A 633C A 572-50 A 678 Gr.A 0X524 NVD 36 NVE 36 DH 36 EH 36 DNV Lloyds 55C 1) E355-DD01 E355-E01 E420-DD01 E420-E01 E460-DD01 E460-E01 DIN 1) SS 1) 17 102 St E 285 TStE285 St E 355 TSt E 355 St E420 TSt E420 St E460 TSt E460 St E355TM TSt E355TM St E420TM TSt E420TM St E460TM TSt E460TM www.norskstaal.no BS 1) ASTM 4360 2134-01 2135-01 40 EE 50 EE 55 EE A 678B A 852 DOMEX 355 MCD TABLES - STEEL Norm EN 10028-2 Yield Tensile strength strengtht ReH N/mm² Rm N/mm² Impact toughness KV J t ºC NS-EN NS-EN 1) DIN 10 028 1 993 17155 1) SS 235 265 295 355 360-480 410-530 460-580 510-650 27 27 27 27 0 0 0 0 P235GH P265GH P295GH P355GH HI 2) HII 2) 17Mn 4 19Mn6 1330-01 1431-01 2102-01 EN 10028-2 LOW ALLOYED STEEL 275 300 310 310 440-590 450-600 480-630 520-670 31 31 31 31 20 20 20 20 16Mo3 13CrMo4-5 10CrMo9-10 11CrMo9-10 16Mo3 13CrMo44 10CrMo9-10 2912-01 2216-04 2218-04 EN 10028-3 NORMALIZED FINE GRAIN STEEL Norm EN 10210-1 NON ALLOYED STEEL EN 10210-1 NORMALIZED FINE GRAIN STEEL Norm EN 10219-1 NON ALLOYED STEEL EN 10219-1 NORMALIZED FINE GRAIN STEEL EN 10219-1 THERMOMECANICALLY ROLLED FINE GRAIN STEEL 275 275 275 275 355 355 355 355 390-510 390-510 390-510 390-510 490-630 490-630 490-630 490-630 40 40 34 30 40 40 34 30 -20 -20 -40 -50 -20 -20 -40 -50 P275N P275NH P275NL1 P275 NL2 P355N P355NH P355NLI P355 NL2 460 460 460 460 570-720 570-720 570-720 570-720 40 40 34 30 -20 -20 -40 -50 P460N P460NH P460NL1 P460NL2 Yield Tensile strength strengtht ReH N/mm² Rm N/mm² Impact toughness KV J t ºC DIN 1) 17102 S275N StE285 WSt E285 TSt E285 SSt E285 St E355 WSt E355 TSt E355 ESt E355 S275 SNL S355N S355NL NS-EN NS-EN 10 210 Aug-06 10 210 1994 NS 1) DIN 164-360 164-400 27 27 27 27 27 40 20 0 -20 0 -20 -20 S235JRH S275JOH S275J2H S355JOH S355J2H S355K2H S235JRH S275JOH S275J2H S355JOH S355J2H NS12120 NS12143 NS12143 NS12153 NS12153 275 275 355 355 420 420 460 460 370-510 370-510 470-630 470-630 520-680 520-680 540-720 540-720 40 27 40 27 40 20 40 27 -20 -50 -20 -50 -20 -50 -20 -50 S275NH S275NLH S355NH S355NLH S420NH S420NLH S460NH S460NLH S275NH S275NLH S355NH S355NLH St E285N TSt E285N St E355N TSt E355N S460NH S460NLH St E460N TSt E460N NS-EN 10 219 Aug-06 NS-EN 10219-1 1997 NS 12120 12143 12143 12153 12153 235 275 275 355 355 355 Under 3mm/ 3mm and over 360-510 430-580/410-560 430-580/410-560 510-680/470-630 510-680/470-630 510-680/470-630 27 27 27 27 27 40 20 0 -20 0 -20 -20 S235JRH S275JOH S275J2H S355JOH S355J2H S355K2H S235JRH S275JOH S275J2H S355JOH S355J2H 275 275 355 355 460 460 370-510 370-510 470-630 470-630 540-720 540-720 40 27 40 27 40 27 -20 -50 -20 -50 -20 -50 S275NH S275NLH S 355NH S355NLH S460NH S460NLH S275NH S275NLH S 355NH S355NLH S460NH S460NLH 275 275 355 355 420 420 460 460 360-510 360-510 450-610 450-610 500-660 500-660 530-720 530-720 40 27 40 27 40 27 40 27 -20 -50 -20 -50 -20 -50 -20 -50 S275MH S275MLH S355MH S355MLH S420MH S420MLH S460MH S460MLH S275MH S275MLH S355MH S355MLH S420MH S420MLH S460MH S460MLH 1) NV NGS 2) Brandnames A 285 C A 299 101 2) 201 2) A 516-70 1432-01 A 662A A 662B A 737B 2106-01 2107-01 NV4-2 Nv4-4L 1205 2) 1208 2) RAEX 385P 2) RAEX 386P arctic 2) NV NGS Brandnames A 737C A 738B 1) SS 1) BS 1) ASTM 2) 4360 St 37-2 St 44-3U St 44-3N St 52-3U St 52-3N DIN ASTM A 537 CI 17100 17123/4/5 360-510 410-560 410-560 470-630 470-630 470-630 Impact toughness 1) St E460 WSt E460 TSt E460 ESt E460 235 275 275 355 355 355 Yield Tensile strength strength BS 1501 NON ALLOYED STEEL NS-EN 1) 10113-2 1) 1311-00 A 283 Gr.C A 633A 43C 43D 50C 50D 40J 1414-01 Celsius S275J2H A 633C A 572-50 Celsius S355J2H 43EE Celsius S355NH Celsius S355NH(mod.) 50EE 55EE 1) St 37-2 St 44-3 U St 44-3 N St 52-3 U St 52-3 N SS 1311-00 1414-01 1) BS 1) NV NGS 2) 34/23 43/36 Brandnames Strongbox 235 Hybox S355J2H St E 285 N TSt E 285 N St E 355 N TSt E355 N St E 460 N TSt E 460 N Validity region for tensile values are given in the introduction on the opposite page. 1) Authority permission in Norway, Sweden and Finland. Approval have been given through NGS-NR (Nordic Advisory Commitee for Pressure Vessel Steels) 2) Authority permission in Norway, Sweden and Finland. Approval have been given through NGS-NR (Nordic Advisory Commitee for Pressure Vessel Steels) 3) When a product shall be delivered as normalized N (Normalized or normalized rolled) a space, a + and the symbol N shall be added Prepared by Norsk Stål AS. All rights reserved. www.norskstaal.no 41 Quality TABLES - STEEL Designation Norm/ Standand Max C Max Mn Max P Max S Chemical values - ladle analysis % Max Max Max. Max Cr Si Cu V S235JR Domex 240YPB/D NVA NVE R St. 37-2 SS 1312 A 36 EN 10 025 Domex DNV DNV DIN 17 100 SS 141312 ASTM 0,17 0,12 *0,21 0,18 1,40 0,80 2,5 x C (min) 0,70 (min) 0,035 0,030 0,035 0,035 0,035 0,025 0,035 0,035 – – – S275J2 P265 GH SA 516 GR.60 H II E295 SS1550 BS4360-43A SS 1412 SS 1430 SS 1432 EN 10 025 EN 10 028-2 ASME DIN 17 155 EN 10 025 SS141550 BS 4360 SS 14 1412 SS 14 1430 SS 14 1432 0,18 0,20 1,50 0,8-1,40 0,025 0,025 0,025 0,015 – – 0,045 S355JO S355J2 S355N Domex 355 MCD/E Domex 350W S355J2H S355NH 386 P ARCTIC P 355 NL1 P 355 NL2 NVD 36 NVE 36 E335 NORSOK M120 rev. 4, June 2004 Y20 S355G10+N/M Y26 S355G11+N/M Y28 S355G13+N Y30 S420G2+Q/G2+M Y50 S500G2+Q/G2+M E 360 St. 52-3N SS 2172 SS 2132 SS 2134 SS 1650 BS4360 50D TSt.E 355 EN 10 025 EN 10 025 EN 10 025 Domex (EN 10 149) Domex EN 10 219 EN 10 210 RAEX EN 10 028-3 EN 10 028-3 DNV DNV EN 10 025 0,20 0,20 0,20 0,10 0,12 0,22 0,20 0,18 0,18 0,18 0,18 0,18 – 1,60 1,60 0,9-1,65 1,50 0,20-0,50 1,60 0,9-1,65 0,9-1,60 0,9-1,70 0,9-1,70 0,9-1,60 0,9-1,60 – EN 10 225 EN 10 225 EN 10 225 EN 10 225 EN 10 025 EN 10 025 Din 17 100 SS 14 21 72 SS 14 21 32 SS 14 21 34 SS 14 16 50 BS 4360 Din 17 102 0,12 0,14 0,16 0,14 0,14 – SS2142 OVAKO - Steel tubes 0,22 Max Mo other elements Ceq 0,03 – – 0,55 – – – – – – – – – AL * Profiles C 0,23 AL – – – – 0,30 – 0,40 0,55 0,30 – 0,02 – 0,08 – AL – – 0,045 – – – – – – – 0,030 0,025 0,030 0,025 0,007- 0,15 0,030 0,035 0,030 0,030 0,025 0,035 0,035 0,045 0,030 0,025 0,025 0,010 – 0,030 0,030 0,025 0,020 0,015 0,035 0,035 0,045 – 0,03 – 0,30-1,25 – 0,30 – 0,30 0,30 0,20 0,20 – – 0,12 – – – 0,12 0,10 0,10 0,10 0,05-0,10 0,05-0,10 – – 0,10 – – – 0,10 – 0,08 0,08 0,08 0,08 – – AL, Nb AL, Nb,B,V Ni max 0,65 – Fine grain treated (Nb+V+Ti) (Nb+V+Ti) (Nb+V+Ti) AL, Nb AL, Nb – – – – 0,45 0,43 0,41 0,43 0,43 – – – 1,65 1,65 1,60 1,65 1,65 – 0,015 0,025 0,025 0,025 0,020 0,045 0,005 0,015 0,015 0,015 0,007 0,045 0,20 0,25 0,25 0,25 0,25 – 0,15-0,55 0,55 0,15-0,55 0,15-0,55 0,15-0,55 – 0,30 0,30 0,35 0,35 0,30 – 0,060 0,060 0,100 0,100 0,080 – 0,08 0,08 0,08 0,08 0,25 – AL, Nb, Ti, Ni AL, Nb, Ti, Ni AL, Nb, Ti, Ni AL, Nb, Ti, Ni Al, Nb, Ti, Ni – – 1,50 0,030 0,040 – 0,50 – – 0,01 AL – 0,55 0,55 0,55 0,55 0,50 0,55 0,03 – 0,25-0,75 0,25-0,55 0,55 – 0,50 0,35 0,15-0,50 – 0,50 0,30 0,50 0,30 0,10-0,50 0,35 0,10-0,50 0,35 – – CE typical/long formula WELDOX 700 D/E/F WELDOX 900 D/E/F WELDOX 960 D/E WELDOX 1100 E/F WELDOX (EN 10137) WELDOX (EN 10137) WELDOX (EN 10137) WELDOX 0,20 0,20 0,20 0,21 1,60 1,60 1,60 1,20 0,020 0,020 0,020 0,010 0,010 0,010 0,010 0,020 0,70 0,70 0,70 0,80 0,60 0,50 0,50 0,50 0,30 0,10 0,10 0,30 0,09 0,06 0,06 0,08 0,70 0,70 0,70 0,70 20 mm 20 mm 20 mm – CE 0,39 CE 0,55 CE 0,55 CE 0,71 DOMEX 500MCD/E DOMEX 650MCD/E DOMEX 700MCD/E DOMEX 740XPD/E HARDOX 400 HARDOX 400 HARDOX 450 HARDOX 450 HARDOX 500 HARDOX 500 DOMEX (EN 10149) DOMEX (EN 10149) DOMEX (EN 10149) DOMEX Thickn. 4–20 mm Thickn. (20)–32 mm Thickn. 4 -7,9 mm Thickn. 8 -20 mm Thickn. 4–13 mm Thickn. (13)–32 mm 0,10 0,10 0,10 0,12 0,15 0,18 0,19 0,21 0,27 0,29 1,60 2,00 2,10 2,10 1,60 1,60 1,60 1,60 1,60 1,60 0,025 0,025 0,025 0,030 0,025 0,025 0,025 0,025 0,025 0,025 0,010 0,010 0,010 0,010 0,010 0,010 0,010 0,010 0,010 0,010 – – – – 0,30–0,50 0,50 0,25 0,50 1,00 1,00 0,30 0,30 0,30 0,60 0,70 0,70 0,70 0,70 0,70 0,70 – – – – – – – – – – – – – – – – – – – – – – – – 0,25 0,25 0,25 0,25 0,25 0,30 AL, Nb, V (Ti) AL, Nb, V (Ti) AL, Nb, V (Ti) AL, Nb, V (Ti) – – – – 34CrNiMO6 42CrMO4 EN 10083–1 EN 10083-1 0,30–0,38 0,38–0,45 0,50–0,80 0,60–0,90 0,035 0,035 0,035 0,035 1,60–1,70 0,90–1,20 0,40 0,40 – – – – 0,15–0,30 0,15–0,30 Ni Simplified extracts and characteristics of steel qualities and standards. The data are non committal and are only guidelines. For complete data, please see the original standards.. Validity region for tensile values are given in the introduction on page 40. Prepared by Norsk Stål AS. All rights reserved. 42 www.norskstaal.no Quenced or quenced and tempered TABLES - STEEL Designation Norm/ Standard S235JR EN 10 025 Domex 240YPB/D Domex NVA DNV NVE DNV R St. 37-2 DIN 17 100 SS 1312 SS 141312 A 36 ASTM Quality Min. Re N/mm² 235 240 235 235 235 220 250 Rm N/mm² 360-510 360-510 400-520 400-520 340-470 360-460 400-550 Min. A5 % 26 28 22 22 Mechanical values Impact toughness °C J 20 27 +20/-20 27 20 – -40 27 Other comments Very good coldformability S275J2 P265 GH SA 516 GR.60 H II E295 SS1550 BS4360-43A SS 1412 SS 1430 SS 1432 EN 10 025 EN 10 028-2 ASME DIN 17 155 EN 10 025 SS141550 BS 4360 SS 14 1412 SS 14 1430 SS 14 1432 275 265 220 265 295 270 245 260 260 260 410-560 410-530 415-515 410-530 470-610 490-610 430-510 430-530 410-530 410-530 21 22 – -20 0 – 27 34 – 20 – – S355JO S355J2 S355N Domex 355 MCD/E Domex 350W S355J2H S355NH 386 P ARCTIC P 355 NL1 P 355 NL2 NVD 36 NVE 36 E335 NORSOK M120 rev. 4, juni 2004 Y20S355G10+N/M Y26S355G11+N/M Y28 S355G13+N Y30 S420G2+Q/G2+M Y50 S500G2+Q/G2+M E 360 St. 52-3N SS 2172 SS 2132 SS 2134 SS 1650 BS4360 50D TSt.E 355 EN 10 025 EN 10 025 EN 10 113-2 Domex (EN 10 149) Domex EN 10 219 EN 10 210 RAEX EN 10 028-3 EN 10 028-3 DNV DNV EN 10 025 355 355 355 355 350 355 355 355 355 355 355 355 335 470-630 470-630 470-630 430-550 min. 480 470-630 470-630 490-620 490-630 490-630 490-620 490-620 570-710 22 22 22 23 24 22 22 22 22 22 21 21 16 0 -20 -20 -20/-40 – -20 -20 -60 -40 -50 -20 -40 – 27 27 40 40/27 – 27 40 40 34 30 34 34 – EN 10 225 EN 10 225 EN 10 225 EN 10 225 EN 10 225 EN 10 025 Din 17 100 SS 14 21 72 SS 14 21 32 SS 14 21 34 SS 14 16 50 BS 4360 Din 17 102 355 355 355 420 500-580 360 355 310 350 350 310 355 355 470-630 460-620 460-620 500-660 600+750 670-830 490-630 470-590 470-630 470-630 590-710 490-620 490-630 22 22 22 19 17 11 -40 -40 -40 -40 -40 – 50 50 50 60 60 – SS2142 OVAKO - Steel tubes 430 min. 600 25 – – Hot rolled WELDOX 700 D/E/F WELDOX 900 D/E/F WELDOX 960 D/E WELDOX 1100 E/F WELDOX (EN 10 137) WELDOX (EN 10 137) WELDOX (EN 10 137) WELDOX 700 900 960 1100 780-930 940-1100 980-1150 1250-1500 14 12 12 8-10 -20/-40/-60 -20/-40/-60 -20/-40 -40/-60 27 tvers 27 tvers 27 tvers 27 tvers -60°C if agreed DOMEX 500MCD/E DOMEX 650MCD/E DOMEX 700MCD/E DOMEX 740XPD/E HARDOX 400 DOMEX (EN 10 149) 500 DOMEX (EN 10 149) 650 DOMEX (EN 10 149) 700 DOMEX 740 HARDOX - wear resistant approx. 1000 550-700 700-880 750-950 min. 790 ca. 1250 18 14 12 13 10 (typical 20 mm) -20/-40 -20/-40 -20/-40 -20/-40 -40 40/27 40/27 40/27 40/27 45 (typical 20 mm) 370-430 HB, typical 400 HB HARDOX 450 HARDOX -wear resistant approx. 1200 ca. 1400 10(typical 20 mm) -40 40 (typical 20 mm) 425-475 HB, typical 450 HB HARDOX 500 HARDOX - wear resistant approx. 1300 ca. 1550 8 (typical 20 mm) -40 30 (typical 20 mm) 470-540 HB, typical 500 HB 34CrNiMO6 42CrMO4 EN 10 083-1 EN 10 083-1 1200-1400 1100-1300 9 10 EN 10 045* EN 10 045* EN 10 045* EN 10 045* * Stated in the certificate * Stated in the certificate 1000 900 Very good coldformability Equivalent Cor-Ten A Z 35 for t ≥ 25 mm Z 35 for t ≥ 25 mm Z 35 for t ≥ 25 mm Very good coldformability Simplified extracts and characteristics of steel qualities and standards. The data are non committal and are only guidelines. For complete data, please see the original standards.. Validity region for tensile values are given in the introduction on page 40. Prepared by Norsk Stål AS. All rights reserved. www.norskstaal.no 43 TABLES - STEEL NORSOK The main changes between NORSOK M-120 Rev. 4 and NORSOK M-120 Rev 5 are: Below is expressed a simplified extract of the original M-120 Rev. 5, November 2008 and the following pages show a selection of data sheets (MDS). - The data sheets are now updated in accordance with the changes in terms and conditions according to EN 10204 and EN 10025 - MDS-Y07 and MDS-Y28 are revised in regard to NDT - There are now introduced maximum yield strength values for Norsok steel with minimum yield strength 420N/mm² and higher Abbreviation stated in MDS: CTOD Crack tip opening displacement DFT Dry film thickness EN European Standard PWHT Post weld heat treatment May 2009 44 www.norskstaal.no TABLES - STEEL Table 1: Material Data Sheets for Structural Steel MDS No. Rev. No. Y01 Y02 Y04 5 4 2 Standard Steel grade Product type EN 10025(all parts) EN 10210(all parts) EN 10219(all parts) EN 10025(all parts) EN 10210(all parts) EN 10219(all parts) EN 10025(all parts) EN 10210(all parts) EN 10219EN 10219- S235JR S235JRH S235JRH Plates and sections Hot finished tubulars Cold formed tubulars S275JR S275J0H S275J0H Plates and sections Hot finished tubulars Cold formed tubulars S355J0 S355J0H S355J2H Plates and sections Hot finished tubulars Cold formed tubulars EN 10025(all parts) EN 10025(all parts) EN 10225 EN 10210(all parts) EN 10219 (all parts) S355J2 S355K2 S355J2 S355K2 S355G1+N Steel quality level IV IV IV Plates III Plates and sections III Hot finished seamless tubulars III S355NH/S355K2H Hot finished tubulars III S355MLH Cold formed tubulars III S420ML Plates and sections III S420MLH Cold formed tubulars III EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 S355G10+N/G10+M S355G12+N/G12+M S355G15+Q/G15+N S355G9+N/G9+M S355G11+N/G11+M S355G14+Q/G14+N S355G13+N Plates Rolled sections Seamless tubulars Plates Rolled sections Seamless tubulars Welded tubulars I I I II II II II 5 5 5 4 5 5 EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 S420G2+Q/G2+M S420G4+M S420G6+Q S420G1+Q/G1+M S420G3+M S420G6+Q Plates Rolled sections Seamless tubulars Plates Rolled sections Seamless tubulars I I I II II II Y40 Y41 Y42 Y45 Y46 Y47 5 5 5 5 5 5 EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 S460G2+Q/G2+M S460G4+M S460G6+Q S460G1+Q/G1+M S460G3+M S460G6+Q Plates Rolled sections Seamless tubulars Plates Rolled sections Seamless tubulars I I I II II II Y50 Y51 Y52 Y55 Y56 Y57 5 5 5 5 5 5 EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 EN 10225 S500G2+Q/G2+M a S500G4+M a S500G6+Q a S500G1+Q/G1+M a S500G3+M a S500G6+Q a Plates Rolled sections Seamless tubulars Plates Rolled sections Seamless tubulars I I I II II II Y05 3 Y06 3 Y07 3 Y08 3 Y15 3 Y16 3 Y20 Y21 Y22 Y25 Y26 Y27 Y28 5 5 5 5 5 4 3 Y30 Y31 Y32 Y35 Y36 Y37 EN 10025 (all parts) EN 10219 (all parts) a This steel grade designation is not included in EN 10225 NOTE All references in the MDS are to the relevant material standard unless otherwise specified. This standard and the following standards are only extracts of the orginal NORSOK STANDARD M-120 Rev., Rev. 5, November 2008 www.norskstaal.no 45 TABLES - STEEL MATERIAL DATA SHEET MDS - Y07 TYPE OF MATERIAL: Structural Steel PRODUCT STANDARD GRADE Hot finished tubulars S355NH EN 10 210-1 seamless or welded SCOPE Rev. 3 June 2007 S355K2H This MDS specifies the selected options in the referred standard and modified requirements which shall supersede the corresponding requirements in the referred standard. The thickness is limited to 40 mm. Welded hollow sections are limited to 20 mm wall thickness. QUALIFICATIONS HEAT TREATMENT/ DELIVERY CONDITION CHEMICAL COMPOSITION Option 1.2 is required. C max. 0,16% and CEV max. 0,43 for all thicknesses TENSILE TESTING IMPACT TESTING EXTENT OF TESTING SURFACE CONDITION The surface of the material shall comply to rust grade A or rust grade B or better according to ISO 8501-1. NON DESTRUCTIVE TESTING (NDT) The weld of the welded hollow section shall be subject to 10% magnetic testing (MT) of external surface and be free of any linear indication. In case of any findings, 100% of the sections with findings shall be examined. The 10% MT shall be carried out for thicknesses above 12 mm. The 10% MT shall be carried out on every section. If the involved parties require more severe defect tolerances for the structural application of the welded hollow section, more severe requirements to be agreed. For thicknesses of 12 mm and above the NDT shall be UT and with acceptance criteria U3. SURFACE PROTECTION MARKING CERTIFICATE EN 10 204 Type 3.1. MATERIAL DATA SHEET MDS - Y20 Rev. 5 June 2007 TYPE OF MATERIAL: Structural Steel with documented through thickness properties PRODUCT STANDARD GRADE Plates EN 10225 SCOPE This MDS specifies the selected options in the referred standard and modified requirements which shall supersede the corresponding requirements in the referred standard. S355G10+N/G10+M QUALIFICATIONS Base material information, shall be submitted with the bid/ be established prior to delivery. The documentation of base material shall cover both delivered and PWHT condition and shall include strain ageing tests (see option 12), typical tensile test results for plates and weldability tests according to Annex E (option 18) within each of the following thickness ranges that are relevant for the order: 25<t≤ 40mm 40<t≤ 63mm 63<t≤ 100mm 100<t≤ 150mm Other thickness ranges related to same chemistry and manufacturing process may apply. In such cases the thickest material in the range shall be tested. The results from PWHT condition shall also meet the specified requirements. CTOD testing shall be included for weldability testing for t > 40 mm and shall meet a requirement of minimum 0,25 mm in as welded condition, and minimum 0,20 mm in PWHT condition unless lower values have been accepted by the purchaser. CTOD testing for thicknesses below 40 mm may be required on the basis of special design criteria. HEAT TREATMENT/ DELIVERY CONDITION Quenched and tempered is also accepted. CHEMICAL COMPOSITION Option 6 TENSILE TESTING IMPACT TESTING EXTENT OF TESTING Option 13, Tensile testing and impact testing shall be carried out to the extent specified in the standard, except that each nominal wall thickness shall be tested instead of ”the same thichkness range”. SURFACE CONDITION NON DESTRUCTIVE TESTING (NDT) SURFACE PROTECTION All surfaces shall receive a preliminary protective primer coat. Blast cleaning shall comply with ISO 8501-1 Sa 2½ and the surface shall remain at Sa 2½ until application of the primer. The primer shall consist of 1 coat zinc ethyl silicate primer with 15 microns. Measured on a plane polished steel or glass test plate the DFT shall be maximum 25 microns. CERTIFICATE EN 10 204 Type 3.1 46 www.norskstaal.no TABLES - STEEL MATERIAL DATA SHEET MDS - Y26 Rev. 5 June 2007 TYPE OF MATERIAL: Structural Steel PRODUCT STANDARD GRADE Rolled Sections EN 10225 S355G11+N/G11+M SCOPE This MDS specifies the selected options in the referred standard and modified requirements which shall supersede the corresponding requirements in the referred standard. QUALIFICATIONS Base material information, shall be submitted with the bid/ be established prior to delivery. The documentation of base material shall include typical tensile test results and Charpy V results at various thicknesses and for Charpy V also various temperatures. Weldability tests shall be documented according to Annex E, option 18. CTOD testing shall be included for weldability testing for thickness above 40 mm and shall meet a requirement of minimum 0,25 mm in as welded condition unless lower values have been accepted by the purchaser. HEAT TREATMENT/ DELIVERY CONDITION CHEMICAL COMPOSITION Option 6 and option 9 TENSILE TESTING IMPACT TESTING EXTENT OF TESTING SURFACE CONDITION NON DESTRUCTIVE TESTING (NDT) SURFACE PROTECTION All surfaces shall receive a preliminary protective primer coat. Blast cleaning shall comply with ISO 8501-1 Sa 2½ and the surface shall remain at Sa 2½ until application of the primer. The primer shall consist of 1 coat zinc ethyl silicate primer with 15 microns. Measured on a plane polished steel or glass test plate the DFT shall be maximum 25 microns. CERTIFICATE EN 10 204 Type 3.1 MATERIAL DATA SHEET MDS - Y30 Rev.5 June 2007 TYPE OF MATERIAL: Structural steel with documented through thickness properties PRODUCT STANDARD GRADE Plates EN 10225 SCOPE This MDS specifies the selected options in the referred standard and modified requirements which shall supersede the corresponding requirements in the referred standard. S420G2+Q/G2+M QUALIFICATIONS Base material information, shall be submitted with the bid / be established prior to delivery The documentation of base material shall cover both delivered and PWHT condition and shall include strain ageing tests (see option 12), typical tensile test results for plates and weldablility tests according to Annex E (option 18) within each of the following thickness ranges that are relevant for the order: 25 < t ≤ 40mm 40 < t ≤ 63mm 63 < t ≤ 100mm 100 < t ≤ 150mm Other thickness ranges related to same chemistry and manufacturing process may apply. In such cases the thickest material in the range shall be tested. The results from PWHT condition shall also meet the specified requirements. CTOD testing shall be included for weldability testing for t > 40 mm and shall meet a requirement of minimum 0,25 mm in a welded condition, and minimum 0,20 mm in PWHT condition unless lower values have been accepted by the purchaser. CTOD testing for thicknesses below 40 mm may be required on the basis of special design criteria. HEAT TREATMENT/ DELIVERY CONDITION CHEMICAL COMPOSISTION Option 6 and option 9 TENSIL TESTING Mechanical properties given in Table 5b shall be modified as follows: Yield Strenght: 420 - 40 Mpa (all thicknesses) Tensile Strenght: 500-660 Mpa (all thicknesses) IMPACT TESTING EXTENT OF TESTING Option 13, Tensile testing and impact testing shall be carried out to the extent specified in the standard, except that each nominal wall thickness shall be tested insted of ”the same thickness range”. SURFACE CONDITION SURFACE PROTECTION All surfaces shall receive a preliminary protecticve primer coat. Blast cleaning shall compy with ISO 8501-1 Sa 2 1/2 and the surface shall remain at Sa 2 1/2 until application of ther primer. The primer shall consist of 1 coat zinc ethyl silicate primer with 15 microns. Measured on a plane polished steel or glass test plate the DFT shall be maximum 25 microns. CERTIFICATE EN 10 204 Type 3.1 www.norskstaal.no 47 48 NOTES www.norskstaal.no INFORMATION / OTHER SERVICES Shotblasting and priming: (according to NS-EN 10 238) Standard preparation grade is SA 2.5. Other surface preparation by agreement. Standard priming is with iron oxide or zinc silicate primer. Thickness according to the standard is 20 my ± 5 my measured on a smooth sample sheet. Capacity: Max. plate with 3600 mm Max. profile height 450 mm With a variable speed we can shotblast thin plates and thin-walled materials by special agreement. Roller conveyor Preheating chamber Blasting unit Painting cabin Final drying Steel bars ad beams are positioned at the proper distance for cleaning and priming, The preheating chamber removes moisture for the surface og the materials and raises the surface temperature to a level that provides drying of the primer. In the painting cabin a shop primer si applied to the steel according to the customer’s order. Final drying takes place in a chamber with suction. The materials are inspected and labelled thereafter according to the customer’s specifications. In the blasting unit the surface of the steel is blasted with steel sand. Rust and scale are removed to provide a clean, rough steel surface for good adhesion of the primer. Flame and Plasma Cutting of Plates AutoCad for programming. Oxygen and plasma cutting with numerically controlled machines. Strip cutting, profile cutting, splitting and beveling. Cutting capasity Oxygen cutting: Max. thickness is 200 mm. Max width is 4000 mm. Underwater plasma: Thickness of 3-25 mm. Max. width of 3000 mm. Carbon steel and stainless steel. www.norskstaal.no 49 Information/ other services Dry plasma: Max. thickness is 35 mm, stainless steel and aluminium. INFORMATION / OTHER SERVICES Cutting Disc saw: Beams and large profiles. Capacity: Max. width: 1000 mm Max. height: 500 mm Angle profile cutting: 0–50° Roller track Band saw: Beams, tubes and profiles. Capacity: Max. width 750 mm Max. height: 500 mm Angle profile cutting: 0–60° Automatic cutting Band saws: Automatic feed for series cutting and batch cutting. Straight cutting only. Angle indication Capacity Max. profile (square) 450 mm or diameter 450 mm. Volume cutting Saw for large series with high capacity and precision, with equipment for end brushing and chip extraction. Capacity 600–1100 units per hour. Tolerances ± 0,5 mm. Brushing of cutting edge Cutting of steel, stainless, aluminium and copper. Round, square and rectangular. Max. diam. 85 mm. Min. diam. 9 mm. We can offer the following outsourced services: • Profile welding • Cold forming • Induction and cold bending • Curved plates and profiles • Punching • Perforation • Galvanizing 50 www.norskstaal.no INFORMATION / OTHER SERVICES Product range • Hot rolled steel plates • Hot rolled steel bars • Hot rolled steel channels, I and H sections • Hollow sections and tubes (hot finished and cold formed) • Bright steel • Cold formed special products • Sheets and coils (hot rolled, cold rolled and coated products) • Building and construction products (reinforcement steel and special products) • Expanded metal,gratings and perforated products • Aluminium (plates, strip, bars and special products) • Metals • Stainless steel (sheets, plates, coils, bars, tubes and hollow sections) www.norskstaal.no 51 INFORMATION / OTHER SERVICES We are situated at the following locations: HARSTAD: Margr. Jørgensens vei 1B, N-9480 Harstad Phone +47 77 00 23 50. Telefax +47 77 00 23 70 E-mail: [email protected] BODØ: Tjeldberget 4, PO.Box 280, N-8001 Bodø Phone +47 75 58 54 00. Telefax +47 75 58 54 07 E-mail: [email protected] ULSTEINVIK: Stålhaugen 5, N-6065 Ulsteinvik Phone +47 70 01 83 50. Telefax +47 70 01 83 51 E-mail: [email protected] BERGEN: Laksevågneset 12, N-5161 Laksevåg Phone +47 55 94 75 00. Telefax +47 55 94 75 10 E-mail: [email protected] HAUGESUND: Industrigaten 14, PB. 514, 5501 Haugesund. Phone +47 52 73 82 00. Telefax +47 52 73 82 08 E-post: [email protected] STAVANGER: Støperigaten 18, PO.Box 1614, Kjelvene, N-4093 Stavanger Phone +47 51 59 71 50. Telefax +47 51 59 71 60 E-mail: [email protected] BRUMUNDDAL: Jemtlandsveien 1, PO.Box 333, N-2381 Brumunddal Phone +47 62 34 73 00. Telefax +47 62 34 73 10 E-mail: [email protected] OSLO: Professor Birkelands vei 25, PO.Box 45 Leirdal, N-1008 Oslo Phone +47 23 17 58 00. Telefax +47 23 17 58 20 E-mail: [email protected] HORTEN: Tollbugata 1, PO.Box 214, N-3192 Horten Phone +47 33 03 29 00. Telefax +47 33 03 29 10 E-mail: [email protected] HEAD OFFICE: Norsk Stål AS Nye Vakås vei 80 PO.Box 123, N-1378 Nesbru, Norway Phone +47 66 84 28 00 Telefax: +47 66 84 28 84 E-mail: [email protected] 52 TRONDHEIM: Transittgaten 6, PO.Box 1068, N-7446 Trondheim Phone +47 73 80 57 50. Telefax +47 73 80 57 70 E-mail: [email protected] SARPSBORG: Alvimveien 54, N-1722 Sarpsborg Phone +47 69 14 84 50. Telefax +47 69 14 84 70 E-mail: [email protected] www.norskstaal.no INFORMATION / OTHER SERVICES www.norskstaal.no 53
