shouldice architectural collection

Transcription

shouldice architectural collection
Shouldice
Architectural
Collection
GREAT AT ALL GRADES
Mount Forest High School
Maitland Recreation Centre
Pierre Elliot Trudeau High School
Villa Giardino
Bronson Medical Center
load-Bearing &
Stone Veneers
Hi Pressure and
Water RepellAnt
The Shouldice Designer Stone
Architectural Collection are
Hi‑Pressure and Water Repellant
Building Units that may be used on
Building Envelopes or incorporated
in design to Accent and Compliment
Completed Wall Systems.
use at grade level
The Architectural Collection may be
used at Grade Level Applications
and Incorporates Integral Water
Repellents throughout each unit for a
Lifetime of Performance.
Albright Manor
Tapestry, Tex-Stone and
Rock-Stone are available in
a Full Compliment of sizes for
Load‑Bearing and Non Load‑Bearing
Applications.
Tapestry features a Smooth
Polished Face Texture with Standard
Bevels on all Face Edges.
Tex-Stone features a Hammered
Stipple Face Texture optional bevel
on all Faces Edges.
Rock‑Stone features Hand
Chiselled Convex Face Textures
for the Ultimate in Third Dimension
Effect. Refer to page 6 for Shapes,
Sizes and Custom Applications.
Derby Towers Development
Villa Giardino
Sears - Heritage Mall
Pierre Elliot Trudeau High School
Load-Bearing Stone & Veneer Profiles
All UNits are available in metric and imperial sizes.
10cm / 4”
Standard
15cm / 6”
Standard
90mm
3 1/2”
20cm / 8”
Standard
140mm
5 5/8”
190mm
7 5/8”
190mm
7 5/8”
240mm
9 5/8”
30cm / 12”
Standard
290mm
11 5/8”
190mm
7 5/8”
190mm
7 5/8”
390mm
15 5/8”
390mm
15 5/8”
25cm / 10”
Standard
190mm
7 5/8”
190mm
7 5/8”
390mm
15 5/8”
390mm
15 5/8”
390mm
15 5/8”
Hollow Core Units are Custom Order
90mm
3 1/2”
90mm
3 1/2”
90mm
3 1/2”
390mm
15 5/8”
590mm
23 5/8”
390mm
15 5/8”
90mm
3 1/2”
Score
424 Full Radius
424 Rock-Stone
424 Watertable
424 Jade
STONE MASONRY UNIT TEST REPORT**
SHOULDICE DESIGNER STONE COLLECTION
CSA STANDARD A165 Series-04
(ASTM C-55-03 Equivalent)
I-25
(I)
TYPE
Minimum
Compressive
Strength MPA
(PSI)
AVG.
Maximum
Saturation
Coefficient*
AVG.
IND.
0.78
0.80
Oven Dry Mass
Density, Kg.m3
(lbs/cu ft)
EXCEEDS CODE
90x90x290mm
90x90x390mm
(4”x4”x16”)
90x190x390mm 90x190x590mm 90x290x590mm
(4”x8”x16”)
(4”x8”x24”)
(4”x12”x24”)
IND.
2521.21 (1900) (1700) 2000
(125)
Maximum Water
Absorption, per‑ cent by Mass
(4”x4”x12”)
8
36.438.728.230.128.9
(5278)
(5612)
(4089)
(4365)
(4190)
0.69
0.71
0.64
0.67
0.69
21372199207622422109
(132)
(136)
(128)
(136)
(130)
6.4
6.7
7.1
6.8
6.9
* Saturation coefficient means the ratio of the absorption after 24 hours of submersion in cold water to the
absorption after 5 h of submersion in boiling water as determined in accordance with
CSA Standard CAN3-A82.2.
** Results of testing by Peto MacCallum Consulting Engineers.
Textures
Available Textures are shown in
Pearl White. Tapestry and Rock-Stone
are Stock Textures in Pearl White and
Chamois.
590mm
23 5/8”
Standard Margin
Horizontal Score
Score
424 Tapestry
90mm
3 1/2”
590mm
23 5/8”
590mm
23 5/8”
Vertical Score
290mm
11 5/8”
190mm
7 5/8”
90mm
3 5/8”
190mm
7 5/8”
Tapestry
Rock-Stone
Not Available In 16x24
Tex-Stone
West Maple High School
West Maple High School
Derby Towers Development Detail
Tex-Stone with Heavy Bevel - Pearl White
Derby Towers Development
Christ The King Catholic Secondary School
Exceeds CODE
The Shouldice Designer Stone Architectural
Collection are manufactured to exceed Code
Standards of the CSA Standard A165 Series‑M94,
the ASTM C 90-03 and ASTM C 55-03
Specifications.
Corner Stone
Rock-Stone Corner Stone - Desert Buff and Executive Grey with 8x24 Tex-Stone Pearl White Band
Rock-Stone and Tapestry Corner Stone - Chamois
Tapestry Corner Stone - Pearl White
The above photos show the Design Flexibility of Shouldice Designer Stone used at Grade Level Application
10
Tapestry Corner Stone with a Margin - Pearl White
Quoins - Pearl White
Corner Stones used as Quoins- Pearl White
Rock-Stone 90º
3 5/8” x 3 5/8” x 23 5/8” & 11 5/8”
90mm x 90mm x 590mm & 290mm
Ordinary Two Piece corner
· Requires special order piece with one face
and one end finished.
· Requires special order or field cut and bevel
piece to restore running bond.
3 5/8” x 7 5/8” x 15 5/8” & 7 5/8”
90mm x 190mm x 390mm x 190mm
Tapestry · 45º
3 5/8” x 7 5/8” x 23 5/8” & 11 5/8”
90mm x 190mm x 590mm x 290mm
Tex-Stone 90º
corner Stone Corner
· Corner Stone made to your specifications
maintains bond in a single piece.
· Corner Stone provides a cleaner and natural
structural block appearance in a veneer stone.
· With the special pieces/finishing required to do
a two piece corner Corner Stone’s additional
cost is only marginally more.
3 5/8” x 11 5/8” x 23 5/8” & 11 5/8”
90mm x 290mm x 590mm x 290mm
custom
angle
Double
Tapestry & Tex-Stone Only
Return
3 5/8” x 15 5/8” x 23 5/8” & 11 5/8”
90mm x 390mm x 590mm x 290mm
11
Charington Details
stuart
custom f
custom A
Roman
oval
custom d
tudor
custom g
Sloped Super Sill 824 - Chamois
12
custom B
custom e
georgian
Circular
custom c
Tudor, Stuart & Custom E Headers
Gothic
Tudor Header - Pearl White
Charington Details, Gem Stone & Corner Stone - Pearl White
824 Watertable - Pearl White
Custom F - Pearl White
Custom Gothic Arch - Pearl White with Brod-Rock - Sterling
Wink - Chamois on Brod-Rock
Surrounds & Quoins - Pearl White
Full Roman & Tudor Surrounds - Pearl White
Large Double Roman Arch - Chamois
13
Gem Stone
Standard and Custom Shaped Profiles
Topaz- Chamois
Custom Banding
Emerald - Pearl White with Brod-Rock & Tapestry Unit
14
Custom Gem Stone Banding
Flutonia and Standard Candles - Chamois
Shapely Curves
Flutonia and Diamond Gem Stone Arch Surrounds
open the door to an even greater flexibility of design.
Flutonia, Diamond & Emerald Gem Stones - Chamois
Gem Stone
Collection
Emerald
Sapphire
Diamond
Opal
Flutonia - Antique Bronze
Emerald - Pearl White
Jade
End
Profiles
All the Gem Stone
Collection can have a
matching profile on
either or both ends.
Topaz
Flutonia
Ruby
15
Architectural Standard colours & Textures
Pearl White
Antique Bronze
Chamois
Executive Grey Desert Buff Briar
Architectural Custom colours & Textures
Dover
Coral
Sonoma
Suede
Prairie
Galaxy
These colour representations have been printed as closely as possible to
actual product colours. However, no colour representation can match the
actual Beauty of Shouldice Designer Stone Products.
Mr. Stoneman
Shallow Lake, Ontario, Canada N0H 2K0
Phone: 800-265-3174 Fax 800-211-6060
Email: [email protected] www.shouldice.ca
THE DESIGNER STONE COLLECTION IS EXCLUSIVELY MANUFACTURED
AND PROCESSED UNDER PATENT PROTECTION U.S PATENT 4,335,549 AND
CANADIAN PATENT 1,169,265 and 2,127,191.
PRINTED IN CANADA 500240
16
$3.00 ea.