LeisureTech Product Guide

Transcription

LeisureTech Electronics | www.leisuretech.com.au | 02 9557 1177 | Products subject to change without notice E&OE.
47
Russound | C-Series
My Russound MRA-3
Control your Russound C-Series Multiroom Audio System and all connected sources from
the comfort of your iPad. My Russound application offers seamless integration with the
C-Series Controller and there’s no additional hardware to purchase, simply download My
Russound from the iTunes store. Minimum System Requirements: MCA-C3 v3.00.01,
MCA-C5 v4.00.02
My Russound is only compatible with the MCA-C3 and MCA-C5 series of multiroom audio
controllers.
• Remote zone control
• Source metadata
• Content browsing
Download My Russound
from the iTunes store!
BSK-1 & BTA-1 Bluetooth Receivers for Multiroom Systems
The new BSK-1 C-Series Bluetooth Receiver permits Bluetooth enabled devices to stream
content to C-Series systems for wireless audio. It is a remotely located Bluetooth receiver,
optimized for ideal placement and range by the custom installer. For maximum flexibility it
can be configured as either a system source or a local source.
BSK-1
The BSK-1 integrates with Russound C-Series multizone systems. System components
communicate with each other via the Russound RNET protocol, and components are
interconnected using standard CAT-5 cable.
The new BTA-1 A-BUS Bluetooth receiver permits Bluetooth enabled devices to stream
content to A-BUS keypads for wireless local source audio in any room.
The BTA-1 A-BUS Bluetooth receiver integrates with Russound A-BUS multiroom systems, which are also interconnected using standard CAT-5 cable. The A-BUS Bluetooth
receiver streams content to the local A-BUS keypad, so it serves as a local source within
the room whose audio that particular keypad controls.
BTA-1
48
Russound | C-Series
powerful scalable intuitive
The C-Series multiroom system offers advanced features that make enjoying your musical experience even easier. Party Mode
allows you to control the music and volume in every room from one room using a shared source. Source Linking connects multiple
rooms to the same source while allowing independent volume and on/off control. This allows you to have your music follow you
throughout your home. Zone Linking provides control of multiple rooms by one or more keypads, perfect for open concept homes.
get connected
The C-Series System is designed for integration, with Home
Theater triggers, routed and common IR outputs, 12VDC
trigger outputs, an optional system wide paging capability
for intercom and telephone systems, and an RS-232 port for
connection to home integration systems. When combined with
Russound’s VM1 Video Matrix, the C-Series System allows
you to share HD component video sources within any multiroom system room.
time to play
Featuring a system wide clock with
alarm and sleep timer functions for individual rooms, the C-Series System can
provide the time, wake you to music,
and help you delay your day, all with
your favorite music.
49
Russound | Multiroom Audio System | C-Series Systems
MCA-C5 Multizone Controller Amplifier
The MCA-C5 is a 8 zone/8 source controller amplifier. 8 zones of
audio with adjustable bass/treble/loudness/balance with digital
amplifiers providing 40W/channel to zones one through six, 8
source inputs with loop outputs and fixed or variable line outputs
per zone, routed IR, built-in IR learning and a pre-programmed
IR library, paging and system muting. Internal AM/FM Tuner with
RDS (optional source 1). Source linking and zone linking. Front
USB and rear RS-232 serial ports, rear Ethernet port, colorcoded
detachable 14-gauge snap connectors, 12V & home
theater triggers. AM and FM antennas included. Controllers are
rack-mount 2-unit high, and include rack ears.
Dimensions:
43.2 x 9 x 43.6 cm
Shipping Weight:
15.68 kg
KT1-C5 Multizone Controller Amplifier System Kit
Includes:
• Controller (MCA-C5)
• 6 System Keypads (MDK-C5)
• Remote Control (SRC-C5)
• AM antenna
• FM antenna
• Pair rack ears
• 6 IR emitters (845.1)
• White & almond wallplates
Shipping Weight:
17.4 kg
MCA-C3 Multizone Controller Amplifier
The MCA-C3 is a 6 zone/6 source controller amplifier. 6 zones of
audio with adjustable bass/treble/loudness/balance with analog
amplifiers providing 20W/channel to all 6 zones, 6 source inputs
and fixed or variable line outputs for zones 1 and 2, routed IR,
built-in IR learning and a preprogrammed IR library, paging
(optional source 6) and doorbell muting. Internal AM/FM Tuner
with RDS (optional source 1). Source linking and zone linking.
Front USB and rear RS-232 serial ports, rear Ethernet port, colorcoded detachable 14-gauge snap connectors, 12V and home
theater triggers. AM and FM antennas included. Controllers are
rack-mount 2-unit high, and Low standby power consumption of
less than 1 watt on selected models. Rack ears included.
Dimensions:
43.2 x 9 x 43.6 cm
Shipping Weight:
15.68 kg
KT1-C3 Multizone Controller Amplifier System Kit
Includes:
• Controller (MCA-C3)
• 6 System Keypads (MDK-C5)
• Remote Control (SRC-C5)
• AM antenna
50
• FM antenna
• Pair rack ears
• 6 IR emitters (845.1)
• White & almond wallplates
Shipping Weight:
38.35 lbs (17.4 kg)
A-SZ4 4 Subzone Hub Controller
The A-SZ4 adds 4 A-BUS subzones to C-Series
controllers. Up to two per controller can be used.
Supports A-K3, A-K5L, A-K5L & A-KSC, A-KP2 keypads.
Subzones are fully addressable for host zone/controller.
Rack ears included. Half rack width for side by side
installation.
Dimensions:
1.75” H x 8.5” W x 10.5” D
Shipping Weight: 4 lbs
MDK-C5 Multiline Display Keypad
Wall-mounted, standard fit, double-gang keypad for the Multizone
Dimensions:
Controller Amplifier (MCA-C5). 2.75” diagonal, high-resolution gray scale
11.43 x 11.43 cm
LCD screen displays real-time system information. Responsive hard buttons
Shipping Weight: 454 g
provide easy navigation of sources and content. Adjustable brightness,
volume, bass, treble, and balance. Access to source selection and control,
party mode, all off/on, and alarm and sleep timer. RJ-45 connection.
SWP-K1 Screwless
Wallplate
SWP-K0 Screwless
Wallplate
7106-532238 White
7106-532245 Almond
7106-532313 Bone
7106-532337 Brown
7106-532344 Black
MDK-C5 CONV Color Conversion Kit
Includes 1 Decora Trim and 1 Keypad Bezel.
Shipping Weight: 4 oz (114 g)
1550-531361 White
1550-531378 Almond
1550-531385 Bone
1550-531392 Brown
1550-531408 Black
7106-533129 Anodised Aluminium
TCH1 RNET Touchpoint
Allows Apple iPad®, iPhone® and iPod® touch to control Russound RNET
Shipping Weight: 2.1 lbs
multizone controller amplifiers. Now with content browsing and SMS3
cover art support. Works with the Russound MCA-C3 and MCA-C5
controller amplifiers. A local wireless network and iPhone or iPod touch are
required for wireless control.
51
TS3 Touchscreen
The TS3 Touchscreen size and weight are the same as it’s
predecessor, the UNO-TS2. The TS3 works exclusively with C-Series
and supports all features: 3.5” Color TFT Screen with Improved
off axis viewing. Single CAT-5 connectivity and 2-gang workbox
mounting. Firmware update-capable with streamlined process using
a USB flash drive.
• High contrast, wide angle TFT color display
• Supports all C-Series multiroom systems features; sleep timer,
clock, etc.
• Displays available system and source information
• Upgradable firmware through USB port
• Defeatable front panel IR Receiver
• Installs easily in double gang box
• Works with Desktop Stand DTS1 to be used on a desk, table, or
counter top
DTS1 Keypad Desktop Stand
Dimensions:
152 x 138 x 120 mm
Desktop Stand is an accessory base that allows the C-Series
MDK-C5 keypads to be used on a desk, table, or counter top.
Weighted body and non-skid base.
Shipping Weight: 0.87 kg
DTS1 White
DTS1 Black
Accessories
RAVK1 RNET AV Kit
SRC-C5 Remote Control
Allows addition of a remote source component to a Russound RNET
enabled Controller Amplifier. Encoder and Decoder convey stereo audio,
video, and control signals up to 300 feet (90 m) over a single CAT-5e
cable. Includes: 1 RAVE1, 1 RAVD1 and 1 power supply.
Pre-programmed with IR learning capabilities for control of
electronics from one remote. Commands up to 8 sources and
includes two favorites keys for fast access to satellite channels
or radio stations. Backlit buttons.
Shipping Weight 1 lb (.45 kg)
Advanced Programming Cable
SA-ZX3 Keypad Splitter
For KP4, KP6, KPL keypads, ComPoint components and iBridge Dock.
Female DB-9 connection (PC end) and flat device pin connection (device
end).
Increases power output for connecting up to 3 system keypads
to one keypad output on a Russound RNET Controller Amplifier. Includes: 1 RJ-45 input jack, 3 RJ-45 keypad jacks, 1
1201A 120V power supply.
Length: 182.9 cm
52
Russound | Multiroom Audio System | CAA System
affordable excellence
Music anywhere you want it, at the touch of a button. That’s what you’ll get with the Russound CAA66 Controller Amplifier. Classical music in the bedroom, rock in the den, and salsa in the kitchen. A multiroom system for everyone to enjoy.
elegant and easy
The CAA keypads deliver elegant access that’s easy to use.
Directly select sources: adjust volume, bass, treble, balance
and volume whenever you want it. Add an optional KPSC for
transport and numeric control of your sources from the keypad.
Link multiple controllers together for an increased number of
rooms, or add up to three keypads per zone for total convenience.
complete control
To make your multiroom system even more convenient to use,
Russound offers a sleek, ergonomic remote control. Easy to
operate and packed with useful features, the remote provides
an added level of access to your music.
CAA66 Controller Amplifier
6 six zones (40W/zone), front panel programming center,
built-in IR learning, rear RS-232 serial port, extensive built-in
IR library, controller link in and out, color-coded detachable
14-gauge snap connectors, rack-mount 2-unit high. 6 IR
emitters with controller only, no keypads. Rack ears included.
Dimensions:
43.2 x 30.5 x 8.9 cm
Shipping Weight:10.4 kg
CAA66K & CAA66L Controller Amplifier Kits
Includes:
• CAA66K: 6 Decora® style KP6 single-gang keypads featuring amber backlit buttons, 20 source selections, plus IR
passthrough and confirmation
• CAA66L: 6 Decora style KPL single-gang keypads featuring
amber backlit LCD panel, source selection, system
indication, plus IR pass-through and confirmation
• System remote control
• Amplifier controller
• White and Almond Decora inserts
Dimensions:
43.2 x 30.5 x 8.9 cm
53
Russound | Multiroom Audio System | CAA System
KPL LCD Keypad (for CAA66/CAS44)
In-wall Decora® style single-gang keypad featuring backlit LCD panel, amber Dimensions:
43.2 x 30.5 x 8.9 cm
backlit soft-touch buttons, assignable source names, IR pass-through, 110
punch-down connector, system status feedback, user adjustable zone bass,
treble, loudness and balance. Wall plates not included.
KPL 6 Color Conversion Kit (for KPL)
Includes 6 Decora inserts.
1210-525100 White
1210-525117 Almond
1210-525124 Bone
1210-525131 Black
1210-525148 Brown
KP6 System Keypad (for CAA66)
In-wall Decora style single-gang keypad featuring amber backlit soft-touch
buttons, 20 source name labels, source selection, plus IR pass-through
and confirmation. 110 punch-down connector, installer adjustable zone
bass, treble, loudness and balance. Wall plates not included.
4.7 x 6.9 x 3.7 cm
Shipping Weight: 113g
KP6 6 Color Conversion Kit (for KP6)
1210-525209 White
1210-525216 Almond
1210-525223 Bone
1210-525230 Black
1210-525247 Brown
KPSC Optional Source Control Keypad (for KP6 or KPL)
In-wall Decora style single-gang keypad accessory adds source control
and numeric control capability to KP6 and KPL keypads. The keypad has
amber backlit soft-touch buttons. Wall plates not included. Not compatible
with CAS44. This is not a standalone keypad.
Dimensions:
4.7 x 6.9 x 2.5 cm
KPSC 6 Color Conversion Kit (for KPSC)
Includes 6 Decora inserts
1210-525452 White
1210-525469 Almond
1210-525476 Bone
1210-525483 Black
1210-525490 Brown
SRC1 CAA System Remote Control
Designed for use with Russound controllers and keypads in CAA66,
CAM6.6, CAV6.6 and RNET® systems. The SRC1 is a system remote only
and does not support learning IR codes.
54
Russound | Multiroom Audio System | CAS System
CAS44 Controller Amplifier Simple 4 Source/4 Zone
four zones 40W/zone and rear RS-232 serial ports,
color-coded detachable 14-gauge snap connectors and
rack-mount 2-unit high. 2 1584.1 dual head IR emitter,
controller only, no keypads. Rack ears included.
Dimensions:
43.2 x 30.5 x 8.9 cm
CAS44L Controller Amplifier System Kit
Includes:
• System Controller
• 4 LCD Keypads (KPL)
• 2 Emitters (1584.1), rack ears, punch-down tool
• Learning/Pre-programmed system remote control
(CAS-RC)
• IR Link Cable
4 zones 40W/zone, 4 audio source inputs, 2 common
IR outputs, mute 12V trigger in, 12V trigger out, rear
RS-232 serial port, color-coded detachable 14 gauge
snap connectors and rack-mount 2U high (rack ears
included). Decora® style KPL single-gang keypad has
amber backlit LCD, source selection, system status
indication plus IR pass-through and confirmation.
Dimensions:
43.2 x 30.5 x 8.9 cm
CAS44K Controller Amplifier System Kit
Includes:
• System Controller (CAS44)
• 4 System Keypads (KP4)
• 2 Emitters (1584.1), Rack Ears, Punch-Down Tool
• Learning/Pre-Programmed System Remote Control
(CAS-RC)
• IR Link Cable
4 zones 40W/zone, 4 audio source inputs, 2 common
IR outputs, mute 12V trigger in, 12V trigger out, rear
RS-232 serial port, color-coded detachable 14 gauge
snap connectors and rack-mount 2U high (rack ears
included). Decora® style KP4 single-gang keypad has
amber backlit buttons, 20 source name labels, source
selection, plus IR pass-through and confirmation.
Dimensions:
43.2 x 30.5 x 8.9 cm
55
Russound | Multiroom Audio System | CAS Systems
KPL LCD Keypad (for CAA66/CAS44)
In-wall Decora® style single-gang keypad featuring backlit LCD panel, amber
backlit soft-touch buttons, assignable source names, IR pass-through, 110 punchdown connector, system status feedback, user adjustable zone bass, treble,
loudness and balance. Wall plates not included.
Dimensions:
4.7 x 6.9 x 3.7 cm
Shipping Weight: 127.6 g
KPL 6 Color Conversion Kit (for KPL)
1210-525100 White
1210-525117 Almond
1210-525124 Bone
1210-525131 Black
1210-525148 Brown
KP-4 System Keypad (for CAS44)
In-wall Decora style single-gang keypad featuring amber backlit soft-touch buttons,
20 source name labels, source selection, plus IR pass-through and confirmation.
110 punch-down connector, installer adjustable zone bass, treble, loudness and
balance. Wall plates not included.
Dimensions:
4.7 x 6.9 x 3.7 cm
KP4 6 Color Conversion Kit (for KP4)
1210-525254 White
1210-525261 Almond
1210-525278 Bone
1210-525285 Black
1210-525292 Brown
CAS-RC CAS44 System Remote Control
Designed for use with the Russound CAS44 controller amplifier and system
keypads (KP6, KP4 and KPL). Operates source devices and the audio system
keypad, and is pre-programmed to control Russound components ST2 Tuner
and SMS3 Media Server. Controls up to four devices.
CAS-RC
Advanced Programming Cable
Advanced programming cable for, KP4, KP6, KPL keypads, ComPoint
components (ISK1, ISK2, ISK3, ISH1), and iBridge Dock. Female DB-9
connection (PC end) and flat device pin connection (device end).
56
Dimensions: 82.9 cm
Russound | Multiroom Audio System | CA4 Systems
affordable excellence
Share your music anywhere in your home, at the touch of
a button. Engineered for elegance and flexibility, the CA4
multizone controller amplifier makes enjoying your music
throughout your home an affordable luxury.
For system control, the CA4-KP keypad lets you select
between four sources and adjust bass, treble and
loudness. It also provides selection for source grouping,
all on, all off, and party mode. The keypad features
green backlighting, and includes an IR receiver and IR
confirmation through an LED status indicator.
For larger homes or individual rooms selected as zones, two CAS44s can be linked together for an eight zone system. Each zone can be
supported by up to three keypads for convenience. Your home, your system – endless possibilities.
CA4 Multizone Controller
4 source/4 zone rack mount, source grouping, party mode, fixed
and variable line outputs, 1-unit high, 4 zones at 30W/zone, rear
RS-232 port, RJ-45 expander jack, 4 single emitters (845.1). Fixed
and variable line output (Zone 4 only). Rack ears included.
CA4-KT1 Multiroom Controller System Kit
Includes:
• Controller (CA4)
• 4 System Keypads (CA4-KP)
• 4 Emitters (845.1)
• System Remote Control (CA4-RC)
• Pair Rack Ears
CA4-WP Wall Port
Single-gang, in-wall port for connection of a
CA4 multizone controller to four CA4-KP zone
keypads and four pairs of speakers. 4 RJ-45
inputs, 4 RJ-45 keypad outputs, 4 speaker
terminal pairs. Wall plates not included.
Shipping Weight: 0.1 oz
CA4-KP System Keypad
Single-gang, in-wall Decora® style keypad for
control of a CA4 multizone audio system. 1 RJ-45
connection. Wall plates not included.
CA4-RC System Remote Control
CA4-KP CONV Color Conversion Kit
Advanced IR learning and pre-programmed remote control
for CA4 multizone controller. It is designed to operate source
devices and the CA4 multizone audio system keypads.
Controls up to four devices..
Includes (4) Decora inserts and 1 wall port insert.
1200-531057 CA4-KP CONV White
1200-531064 CA4-KP CONV Almond
1200-531095 CA4-KP CONV Bone
1200-531071 CA4-KP CONV Black
1200-531088 CA4-KP CONV Brown
57
Russound | Source Equipment
be resourceful
Digital music, Internet radio and iTunes are all available through Russound’s Smart’s Sources. Our Digital Media Streamer and
iBridge Dock both increase the accessibility to digital music available on iPods local network devices or the internet available for
listening through our multiroom audio systems.
stay connected
Russound Smart Sources deliver metadata about the song, station, artist, album, or playlist of what’s being played to specific
Russound keypads and touch-screens, allowing you to check out
the name of the artist you liked on your favorite internet radio station or see what playlist your children are listening to.
navigate your favorites
Russound smart sources make it easy to select your favorite
stations, albums, artists or genres from your system keypads and
touch-screens. Click or scroll through your sources and select
anything you want to hear wherever you want to hear it.
As an Apple®
Certified AirPlay®
accessory, audio
content can be
sent to the DMS-3.1
from computers using iTunes®,
iPad®, iPhone® and iPodtouch®.
DMS-3.1 Digital Media Streamer
Three independent streaming outputs and one AM/FM tuner with RDS feedback.
Streams content from internet radio stations and music service providers. Provides
access and playback of digital audio files on LAN connected UPnP/DLNA devices.
Supports content playback from connected USB storage devices. Includes: DMS3.1 Digital Media Streamer, AM Antenna, FM Antenna. Pair rack-mount ears, power
supply. Rack-mountable 1U high.
Sirius Xm available in the United States and Canada only.
Dimensions: 43 x 20.3 x 4.4cm
(WDH)
ST1 Smart Tuner
BGK1 iBridge Dock Kit
The ST1 is a single AM/FM tuner
with RDS. Works with C-Series
multiroom systems. 6 banks of 6
presets. Half rack width for side by
side installation. Built-in 110-240V
AC power supply. Pair rack-mount
ears included.
Allows you to use an iPod as a remote source for a Russound RNET
or C-Seriesmultiroom audio-video
system. Used with a Russound
RNET A/V decoder, it provides
either RNET or infrared (IR) control
of the iPod, depending on the type
of system.
Shipping Weight: 3.7lbs
58
Russound | Video Distribution
do you get the picture
In today’s media-driven world, multi-room entertainment isn’t just audio. Video is a vital part of our daily experience. Enjoy your favorite
programs throughout the house with Russound’s video distribution solutions.
stay connected
With sources such as cable and satellite boxes, DVD
players, and multimedia computers and servers being
integrated in residential multi-room systems, sharing the
“vision” is no longer difficult. Russound video distribution
products make this possible.
efficient and powerful
The VM1 Video Matrix makes it possible to automatically switch and
distribute your HD component video sources along with audio from
your Russound multi-room audio system, and over single CAT-5 cable.
easy moves
Russound’s Video Baluns are the perfect solution for moving your
video signals 500’ or more over a CAT-5 cable. Composite and HighDefinition component video can be routed anywhere quickly and easily.
MOD-VB Composite Video
Connector
VBHD Active Component Video
Balun Kit
VBC Active Composite A/V
Balun Kit
Premium gold plated RCA. Converts
composite video signal from RCA to CAT-5
cable. Sold in pairs. Works up to 2200’.
Send component video over a single CAT-5
up to 500’ point-to-point. Includes the HDTX,
HDRX and 12VDC 200mA power supply.
Send component video over CAT-5 up to
500’ point-to-point. Includes the HDTX,
HDRX and 12VDC 200mA power supply.
Shipping Weight: 2 oz
7103-121876 MOD-VB
59
Russound | Video Distribution
Free Video Matrix Configuration Software
Russound’s new VM1 Configuration Tool allows for the custom assignment of Video Matrix inputs and outputs to specific Russound
controller amplifier sources and zones. For a copy of the VM1 Configuration Tool software, instructions, and the latest VM1 Video
Matrix firmware, please visit Russound’s Support Center online at www.russound.com
VM1-4 Video Matrix 4 Zone Kit
4 source/4 zone HD component video matrix system.
RNET and RS-232 control capable. Includes: 4x4 matrix
(VM1), power supply (A-PS) and 4 video receivers
(VMR1).
VM1-4UC Video Matrix 4 Zone Kit with 2 Zone Up-Conversion
S-video, NTSC or PAL composite video up-conversion
on two sources. RNET and RS-232 control capable.
Includes: 4x4 matrix (VM1), power supply (A-PS) and
video receivers (VMR1).
VM1-8 Video Matrix 8 Zone Kit
VM1-8UC Video Matrix 8 Zone Kit with 2 Zone Up-Conversion
VM1-8UC2 Video Matrix 8 Zone Kit with 4 Zone Up-Conversion
S-video, NTSC or PAL composite video up-conversion
on four sources. RNET and RS-232 control capable.
Includes: 8x8 matrix (VM1), power supply (APS) and 8
video receivers (VMR1).
60
Russound | Back Boxes
Flexbox Back Boxes
Flexbox speaker back boxes reduce background noise, provide a moisture barrier, diffuse distortion and improve sound quality.
The flexible construction allows for easy installation in retrofit or new construction settings. Both models are flame retardant and meet
ASTM E119 and UL 263/ NFPA 251 (1-hour) and ASTM E84/NFPA 70 standards.
FBC1-FR In-Ceiling
• Thermal Value: R 4.2
• -40º F to 350º F (-40º C
to 177º C)
• Fire Rating: CLASS 1
Fire Rated ASTM E119
/NFPA
• 251 and UL 263 for 1
Hour Fire Rating
• 1” (25 mm) nominal
thickness, proprietary
composite
• STC Rating: 32, Flame
Spread: 23
• Smoke Density: 30 (ASTM
E84/ NFPA 70)
FBW1-FR In-Wall
• 1” (25 mm) nominal
thickness, proprietary
composite
• STC Rating: 32, Flame
Spread: 23
• Smoke Density: 30 (ASTM
E84/ NFPA 70)
Dimensions: 355 x 152 x 445 mm
Dimensions: 368 x 89 x 406 mm
Weight: 3 kg
Weight: 2.4 kg
• Thermal Value: R 4.2
• -40º F to 350º F (-40º C
to 177º C)
• Fire Rating: CLASS 1
Fire Rated ASTM E119
/NFPA
• 251 and UL 263 for 1
Hour Fire Rating
SRM-2.1 Speaker Relay Module
Share speakers between controllers and home
theater. Add 12-VDC automatic A/B switching,
speaker level, between CA amplifier and local
amplifier. Wall plates not included with keypads.
Shipping Weight: 0.11kg
Dimensions: 33.5 x 63.5 x 48mm (WHD)
Decora Screwless Cover Plates
SWP-1
SWP-3
SWP-S21
1 gang
3 gang
S2 & K2 with 1 gang.
Available in almond, white, black and
stainless steel.
stainless steel.
stainless steel.
SWP-2
2 gang
stainless steel.
61
Russound | R-Series Amplifiers
power for your music
Audio amplifiers are the muscle behind every home music system. Russound puts great pride and effort into building stereo and
multizone amplifiers that supply years of problem-free service.
Russound engineers embarked on designing our amplifiers to meet the demands of multizone audio systems: seamless integration,
bulletproof reliability and astonishing fidelity. Built to complement an extensive array of audio systems, these versatile products deliver
outstanding performance under the most demanding conditions.
R-Series power amplifiers
The R-Series amplifiers feature an elegantly understated
industrial design. Their standard-width, modular-height
designs look great in system shelving or built-in units, with
rack mount conversion hardware for seamless rack integration.
Russound’s R-Series amplifiers employ a robust circuit
design for stability under demanding loads. All models
feature auto signal-sensing inputs and bridgeable channel
pairs for increased power output and flexibility of application.
All amplifier channels feature independent gain controls
for precise level matching and dual speaker outputs for
convenience.
62
Russound | R-Series Amplifiers
D250LS 2-Channel Digital Amplifier
R290DS 2-Channel Dual Source Amplifier
Auto-sensing enables localized speaker override for a connected
peripheral, such as a TV or PC. The bridgeable power setting combines
channel power for 125W into a single 8-ohm load, rated 50W/channel
RMS at 8 ohms. 1U 1/2 rack chassis has three mounting options.
90W amplifier with auto-source switching. Primary and secondary audio
inputs, loop output, selectable speaker level input, and 12V trigger
input and output. Rated at 90W/channel into 8 ohms, 110W into 4 ohms,
and bridgeable to 250W of power into a single 8 ohm load. Rack ears
included.
Dimensions: 21.59 x 26.67 x 4.45 cm
Shipping Weight: 10 lbs (4.5 kg)
Dimensions: 43 x 35.5 x 10.5 cm
R850MC 4 Zone/8 Channel Multiroom Amplifier
R1250MC 6 Zone/12 Channel Multiroom Amplifier
Protection circuitry provides safety and reliability under heavy use.
Amplifies up to four stereo line-level sources. Zones have dedicated
line level inputs or can share a source via the bus input. Separate gain
controls for each zone to preset room sound levels. Zone output can be
switched to stereo or bridge mono output. In bridged mode, a zone’s left
and right channels are combined for a higher-power mono output, ideal
for large rooms or outdoor listening areas. A+B speaker output in 4 ohm
mode. Rack ears included. 50W/channel RMS at 8 ohms x 8.
Zones have dedicated line level inputs or can share a source via the
bus input. Separate gain controls for each zone to preset room sound
levels. Zone output can be switched to stereo or bridge mono output.
In bridged mode, a zone’s left and right channels are combined for a
higher-power mono output, ideal for large rooms or outdoor listening
areas. A+B speaker output in 4 ohm mode. Rack ears included.
50W/channel RMS at 8 ohms x 12.
Dimensions: 17” W x 16.5” D x 5.875” H (43 x 42 x 15 cm)
Shipping Weight 61.25 lbs (27.8 kg)
Dimensions: 17” W x 16.5”D x 5.875”H (43 x 42 x 15 m)
Shipping Weight 51 lbs (23 kg)
63
Russound | Speaker Selectors
Speaker selectors are an efficient, cost-effective means of expanding the audio system in your home or office. From four to twelve
rooms, with or without volume controls, multiple A/B amplifier inputs to automatic A/B switching devices, Russound speaker selectors can be used to accommodate a number of applications from the simple to sophisticated.
Autoformer-Based Selectors with Volume Control
Single Source Selectors
SS-4.2 4 Pair
SS-6.2 6 Pair
SDB-2.1 2 Pair
SDB-4.1 4 Pair
SDB-6.1 6 Pair
100W/channel RMS, zone
labels. 4 ohm stable amplifiers & receivers. Resettable circuit protection.
Impedance bypass switch
for use with impedance
matching volume controls.
70W/channel RMS, zone
100W/channel RMS.
Colour-coded detachable
14-gauge snap connector.
Standard configuration
is 4x, and installer may
change configuration to
2x or 8x. Zone identifying
labels included.
200W/channel RMS.
Colour-coded detachable
14-gauge snap connectors.
Standard configuration
is 4x, and installer may
change configuration to
2x or 8x. Zone identifying
labels included.
100W/channel RMS. zone
Dimensions: 22 x 4.8 x 16cm
(WHD)
Dimensions: 29.5 x 4.8 x 16cm
(WHD)
Dimensions: 22 x 8 x 16cm
(WHD)
Dimensions: 43.5 x 8 x 16cm
(WHD)
Dimensions: 43.5 x 8 x 16cm
(WHD)
Shipping Weight: 5kg
Autoformer-Based Selectors/Impedance Matching
PRO-6 HP 6 Pair
PRO-8 HP 8 Pair
PRO-12 HP 12 Pair
100W/channel RMS with subsonic
filter built in. Colour-coded detachable
14-gauge snap connectors. Zone labels
included.
filter, built in. Colour-coded detachable
included.
filter built in. Colour-coded detachable
included.
Dimensions: 43.5 x 7.5 x 20.5cm (WHD)
AB-2.2
Tabletop
Dual-Source
A single pair of speakers to be driven by
either of two amplifiers or allow a single
amplifier to drive either of two pairs of
speakers.
Dimensions: 140 x 73.5 x 76.5mm (WHD)
AB-3.2 Source Selector
AB-1.2 Dual Source
Automatic A/B speaker selector,
speaker level switching, selectable
delay and sensitivity. Colour-coded
detachable 14-gauge snap connectors.
Detachable 12V DC power supply.
Allows a single pair of speakers to be driven by
either of two amplifiers or allow a single amplifier to
drive aither of two pairs of speakers. Decora wallplate not included.
Dimensions: 159 x 51 x 39 mm (WHD)
Dimensions: 25.5 x 70 x 44.5 mm (WHD)
Shipping Weight: 85g
64

LeisureTech Product Guide

Transcription

Similar documents

Order Form

FS 1000 Owners Manual

dom of aug2012

Datasheet Voxtel SM315

C-Series - Island Home Automation

ordering instructions mail order

By: Chester C. Cokaliong THE INTERNATIONAL SAFETY MANAGEMENT AS

Does Free shipping Make Money?

papa-johns-gift-card-form copy

How To Complete This Form Printed Apparel for Work