Stimpson Product Guide

2010 Online Version Only
Eyelets • Grommets and Washers • Hole Plugs • CE® Rivets • Snap Fasteners • Clamps
Ferrules • Arrows • Shells • Vents • Corners • Attaching Machines
An Introduction to the
Stimpson Company, established 1852...
For a purchase and sales transaction to be truly successful, all parties must benefit. We realize our success
depends on YOU, our Customer. Given the opportunity, we are prepared to do our part by providing you
with friendly, helpful sevice; by maintaining the largest inventories in the industry; and by providing products
unmatched for quality, supported by on-time delivery and attractive pricing.
Our goal is SUCCESS TOGETHER
In 1852, the Edwin B. Stimpson Company opened a 1,500 square
foot factory in Lower Manhattan at what would be, 31 years
later the foot of the Brooklyn Bridge.
Today, over 150 years later, our 275,000 square foot facility
located in Pompano Beach, Florida, is operating with the most
advanced, state-of-the-art, high-speed automated equipment;
producing the largest variety of standard and special eyelets,
grommets and washers and hole plugs of any single company
in the world.
Over the last 25 years alone, Stimpson has shipped over 150
billion parts including Eyelets, Grommets, Washers, Hole Plugs,
Snap Fasteners, Vents, Clamps, Ferrules and many additional
metal products.
Placed end to end, these parts would circle the globe 65 times...
no small feat considering the size of our products!
And, we thank you, our Customer, for making it possible.
2
Copyright 2010 by Stimpson Co., Inc.
Product Index
Eyelets
An Introduction . . . . . . . . . . . . . . . . . . . . 4-5
Apparel . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Envelope . . . . . . . . . . . . . . . . . . . . . . . . . . 8
GS® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Polybag . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Telescoping . . . . . . . . . . . . . . . . . . . . . . . 11
Grommets
Oblong . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Rolled Rim . . . . . . . . . . . . . . . . . . . . . . . . 12
Self-Piercing . . . . . . . . . . . . . . . . . . . . . . . 11
Sheet Metal . . . . . . . . . . . . . . . . . . . . . . . 10
PRODUCTION
Hole Plugs
Electrical Knockout . . . . . . . . . . . . . . . . . . 15
Special . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Standard . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Rivets
CE® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Snap Fasteners
Ring Snaps . . . . . . . . . . . . . . . . . . . . . . . . . 9
MACHINING CENTER
Washers
Apparel . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Industrial . . . . . . . . . . . . . . . . . . . . . . . . . 17
Neck . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Oblong . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Sheet Metal . . . . . . . . . . . . . . . . . . . . . . . 10
Spur . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Terminal . . . . . . . . . . . . . . . . . . . . . . . . . 17
Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
E.D.M.
Additional Categories
Arrows, Hands and
Spinners . . . . . . . . . . . . . . . . . . . . . . . 17
Clamps and Tips . . . . . . . . . . . . . . . . . . . 19
Corners . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Ferrules, Shells, Caps and
Cups . . . . . . . . . . . . . . . . . . . . . . . . . 18
Machinery . . . . . . . . . . . . . . . . . . . . . 20-21
Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
®
Co.
Inc.
ISO 9001Certified
1515 SW 13th Court, Pompano Beach, FL 33069
PHONE: (877) 765-0748 • FAX: (954) 545-7440
Web Site: www.stimpson.com
E-Mail: [email protected]
3
An
Introduction to
Eyelets
Terminology
®
Co.
The
Flange
Inc.
The Barrel
The
Wall
The Hole
(Piercing)
No matter where you are, you’re always surrounded by STIMPSON EYELETS.
They’re all over your home; in your appliances, electrical circuits, tools, children’s
toys, clothing, shoes, sneakers, furniture, lighting fixtures, outlets and switches,
heating units, alarms, and more. They’ll surround you in your car, on planes,
trains, buses...even in space shuttles; and when you go to work, shopping or the
gym, you’ll find them there also.
S
Measuring the Eyelet
Small, inexpensive, and often not seen,
STIMPSON EYELETS are an indispensable
ingredient in the successful production of
most every manufacturing industry. On the
pages that follow, we will introduce you to
some of the over 3,800 sizes and styles we
ship worldwide. For more information
regarding STIMPSON EYELETS, please request
our Eyelet Catalog.
Flange Diameter (FLG)
We now provide the following “Introduction
to Stimpson Eyelets” to acquaint you with
their many characteristics, and we invite you
to speak with our Customer Service
Representatives about your eyeleting needs. STIMPSON EYELETS are the low cost,
reliable solution to thousands of fastening requirements.
Hole Diameter
Inside Diameter
(ID)
Standard Tolerances
Dimensions
Flange Diameter
Outside Diameter
Length Under Flange
Hole Diameter
Length
Under
Flange
(LUF)
Outside
Diameter
(OD)
Settings
Tolerance
+/-.005”
+/-.002”
+/-.005”
usually .005”
smaller than mean
inside diameter
ROLL
SCORED
FLARED
There are three basic types of settings...Roll (or coil),
Scored, or Flared.
The most common is the Roll which provides a smooth,
rounded, uniform surface.
A Scored setting divides the end of the barrel into equal
segments to provide extra grip strength in soft materials.
A Flared setting is commonly used in PC boards and
provides a funnel appearance often used for soldering.
4
The Flange
The Barrel
Rolled Flange: A finished and decorative
appearance make the Rolled Flange a
popular choice. When set, the under
edges of the flange lend well to obtaining
a tight setting by gripping the work.
Straight Barrel: Straight barrel eyelets
are the most commonly used. The holes
in the materials to be fastened together
are usually the same size, and the
straight barrel aids in alignment.
Embossed Flange: Combines the contour
of the rolled and flat flange to provide
the holding power of the roll with a flat
outer edge to reduce the chance of
cutting through the work.
Shoulder Eyelets: So called because the
barrel consists of two distinct diameters
resulting in a stepped shoulder effect.
Used to join parts with dissimilar hole
sizes; or with the upper (larger) barrel
portion acting as a spacer.
Flat Flange: Usually selected when minimum above surface projection is desired,
or where a recessed hole is used for
clearance requirements. In soft or thin
materials they may be chosen to avoid
the flange cutting through the material.
Funnel Flange: Popular in the electronics
industry for easy insertion of leads,
and/or trapping of solder flow on PC
boards. Used for costume jewelry where
gem stones are glued into the funnel
contour.
Tapered Barrel: The barrel has a definite
tapering down of diameter from just
under the flange to the bottom end.
Desirable primarily in fastening soft
materials since the taper provides an
easy insertion into the work.
Closed End: A closed end can be used
to fasten different pieces together while
eliminating the pass through of air, dirt,
grease, or other foreign matter. To set,
the end of the barrel is bumped to collapse tightly against the work pieces.
Bell Flange: Also ideal for easy acceptance of leads. The rounded inner contour
reduces abrasion where wire, cord, or
rope is passed through the length of the
barrel.
Oblong and Square Barrels: In addition
to the most common barrel styles
described above, Oblong and Square
Barrels are popular for specialized
applications.
Clipped Flange: Where space constraints
require virtually no flange, the usual
flange area is clipped (trimmed) as close
as possible to the outside diameter of the
barrel.
Pre-Coiled: Normally used as spacers,
they are frequently molded in place in
rubber or plastics.
Coil/Grip Ranges
No two applications being alike, it’s impossible to offer specific standards as to how much barrel length there
should be to obtain proper coil/grip. Too much length can result in barrel buckling (collapsing). Too little may
mean loss of grip strength. Rigid materials usually need less; soft flexible materials will need more, as a wide
coil (to grip more material) is desirable. If parts fastened are exposed to unusual stresses, extra length is usually
desirable, even though materials may be rigid in nature.
As a general guide in preliminary selection, the following should be helpful:
Eyelet Diameter:
Additional Length:
3/64” to 1/16”
1/32”
3/32” to 1/8”
1/16”
5/32” to 3/16”
3/32”
1/4” or more
1/8”
For final determination as to proper length, after selecting an eyelet let us make actual settings for your
functional testing. Or, send samples of your components and we’ll select an eyelet and forward the settings
for your review.
5
GS® Eyelets
Outside
Diameter
Length
Under
Flange
Flange
Diameter
Stimpson “Graduated Size” (GS®) Eyelets are as their name indicates...a system of standard eyelets
incorporating a series of graduated increases (1/32 of an inch) in both length and outside barrel
diameters. The result is 72 eyelets which will meet the requirements of most general purpose eyeleting
applications. GS® Eyelets are most commonly requested in brass, and are normally inventoried in large
quantities. GS® Eyelets can also be made from steel, stainless steel, aluminum and copper.
72 Graduated Size eyelets, teamed with Stimpson’s economical eyeleting machines, offer the highest quality system in the industry, at the lowest cost.
INCHES
OUTSIDE
DIAMETER
FLANGE
DIAMETER
METAL
THICKNESS
OUTSIDE
DIAMETER
FLANGE
DIAMETER
METAL
THICKNESS
OUTSIDE
DIAMETER
FLANGE
DIAMETER
METAL
THICKNESS
OUTSIDE
DIAMETER
FLANGE
DIAMETER
METAL
THICKNESS
OUTSIDE
DIAMETER
FLANGE
DIAMETER
METAL
THICKNESS
OUTSIDE
DIAMETER
FLANGE
DIAMETER
METAL
THICKNESS
OUTSIDE
DIAMETER
FLANGE
DIAMETER
METAL
THICKNESS
6
.059
2/32
.062
3/32
.093
4/32
.125
5/32
.156
6/32
.187
LENGTH UNDER FLANGE
7/32
.219
8/32
.250
9/32
.281
10/32
.312
11/32
.344
12/32
.375
.105
.007
.089
GS 2-2
GS 2-3
GS 2-4
GS 3-3
GS 3-4
GS 4-3
GS 2-5
.121
14/32
.437
Available
with rolled
or flat
flange...
open or
closed end
GS 2-6
GS 2-7
GS 3-5
GS 3-6
GS 3-7
GS 3-8
GS 3-9
GS 3-10
GS 3-11
GS 3-12
GS 4-4
GS 4-5
GS 4-6
GS 4-7
GS 4-8
GS 4-9
GS 4-10
GS 4-11
GS 4-12
GS 5-3
GS 5-4
GS 5-5
GS 5-6
GS 5-7
GS 5-8
GS 5-9
GS 5-10
GS 5-11
GS 5-12
GS 6-3
GS 6-4
GS 6-5
GS 6-6
GS 6-7
GS 6-8
GS 6-9
GS 6-10
GS 6-11
GS 6-12
GS 6-13
GS 6-14
GS 7-3
GS 7-4
GS 7-5
GS 7-6
GS 7-7
GS 7-8
GS 7-9
GS 7-10
GS 7-11
GS 7-12
GS 7-13
GS 7-14
GS 8-3
GS 8-4
GS 8-5
GS 8-6
GS 8-7
GS 8-8
GS 8-9
GS 8-10
GS 8-11
GS 8-12
GS 8-13
GS 8-14
.150
.009
13/32
.406
.200
.0095
.152
.245
.010
.183
.290
.0105
.215
.340
.011
.246
.385
.011
Shoe Eyelets
Outside
Diameter
Length
Under
Flange
Stimpson Shoe Eyelets provide a variety of sizes, styles and
fashion finishes needed to complement your fine footwear styling.
Flange
Diameter
Rolled
Invisible
Scored
Hexagon
Shoe Eyelet Chart - not all sizes shown
Trade Size
#1 Invisible Scored
#2 Invisible Scored
#3 Invisible Scored
#00 Roll
#00 Roll
#00 Long Roll
#00 Long Roll
#00 Ex. Long Roll
J.L. Roll
J.L. Roll
AA Roll
AA Roll
AA Scored
AA Scored
AA Long Roll
AA Long Roll
AA Ex. Long Roll
AA Ex. Long Roll
AA Long Scored
AA Long Scored
AA Ex. Long Scored
#1 Roll
#1 Roll
#1 Scored
#1 Scored
#1 Long Roll
#1 Long Roll
#1 Ex. Long Roll
#1 Long Scored
#2 Roll
#2 Roll
#2 Scored
#2 Scored
#2 Long Roll
#2 Long Roll
#2 Ex. Long Roll
#3 Scored
#4 Roll
#5 Roll
Small Hexagon
Large Hexagon Long
Military Boot
* Indicates Scored Eyelet
Eyelet
Number
A2601*
A3639*
A2068*
A1967
A2400
A3625
A2620
A3654
A1942
A3165
A2269
A2605
A2272*
A289*
A2030
A2617
A3138
A3433
A2236*
A2711*
A3592*
A1928
A2282
A2000*
A2041*
A1979
A2380
A1685
A2374*
A2187
A1387
A2101*
A2058*
A2343
A2372
A2627
A2227*
A2013
A2232
A3660
A3467
A2639
Inches
Metal
A
A
A
A
B,S
A
B,S
A
A
B
A
B,S
A
A,B,S
A
B,S
A
B,S
A
B,S
B,S
A
B,S
A
B,S
A
B,S
A
A
A
B,S
A
B,S
A
B,S
A,B
A
B
A
B
B
A
Eyelets with two outside diameter measurements indicate a tapered barrel.
O.D.
.230/.209
.184/.156
.175/.146
.277
.275
.282
.280/.272
.280
.321/.288
.290/.270
.220
.215
.220
.215
.220
.215
.227/.220
.228
.220
.215
.215
.208/.192
.204
.201
.204
.200/.190
.204
.200
.200/.190
.177
.173
.177
.183
.180
.180
.180
.157
.157
.127
.185
.224
.297/.285
L.U.F
.135
.136
.124
.157
.150
.182
.180
.210
.222
.225
.168
.150
.168
.165
.188
.188
.220
.217
.188
.190
.215
.142
.153
.155
.153
.182
.185
.212
.187
.138
.142
.138
.142
.165
.162
.190
.122
.102
.105
.175
.212
.198
Flg. Dia.
.333
.298
.255
.490
.495
.493
.488
.495
.515
.510
.390
.390
.390
.390
.390
.388
.385
.390
.390
.388
.388
.345
.343
.345
.343
.343
.345
.343
.343
.300
.300
.300
.300
.300
.303
.300
.253
.235
.195
.330
.463
.490
Millimeters
Mtl. Thk.
.014
.014
.016
.016
.011
.016
.012
.016
.018
.013
.015
.008
.015
.008
.015
.010
.018
.012
.015
.010
.010
.016
.011
.016
.011
.016
.009
.016
.016
.016
.012
.016
.010
.013
.009
.013
.015
.010
.012
.011
.012
.016
O.D.
5.84/5.31
4.67/3.96
4.45/3.71
7.04
6.99
7.16
7.11/6.91
7.11
8.15/7.32
7.37/6.86
5.59
5.46
5.59
5.46
5.59
5.46
5.77/5.59
5.79
5.59
5.46
5.46
5.28/4.88
5.18
5.11
5.18
5.08/4.83
5.18
5.08
5.08/4.83
4.50
4.39
4.50
4.65
4.57
4.57
4.57
3.99
3.99
3.23
4.70
5.69
7.54/7.24
L.U.F
3.43
3.45
3.15
3.99
3.81
4.62
4.57
5.33
5.64
5.72
4.27
3.81
4.27
4.19
4.78
4.78
5.59
5.51
4.78
4.83
5.46
3.61
3.89
3.94
3.89
4.62
4.70
5.38
4.75
3.51
3.61
3.51
3.61
4.19
4.11
4.83
3.10
2.59
2.67
4.45
5.38
5.03
Flg. Dia.
8.46
7.57
6.48
12.45
12.57
12.52
12.40
12.57
13.08
12.95
9.91
9.91
9.91
9.91
9.91
9.86
9.78
9.91
9.91
9.86
9.86
8.76
8.71
8.76
8.71
8.71
8.76
8.71
8.71
7.62
7.62
7.62
7.62
7.62
7.70
7.62
6.43
5.97
4.95
8.38
11.76
12.45
Mtl. Thk.
0.36
0.36
0.41
0.41
0.28
0.41
0.30
0.41
0.46
0.33
0.38
0.20
0.38
0.20
0.38
0.25
0.46
0.30
0.38
0.25
0.25
0.41
0.28
0.41
0.28
0.41
0.23
0.41
0.41
0.41
0.30
0.41
0.25
0.33
0.23
0.33
0.38
0.25
0.30
0.28
0.30
0.41
Terminology: O.D. = Outside Diameter; L.U.F. = Length Under Flange; Flg. Dia. = Flange Diameter; Mtl. Thk. = Metal Thickness
A = Aluminum; B = Brass; S = Steel
7
For Tags, Envelopes, Binders and Polybags
Designed and manufactured to run in today’s high speed machinery, Stimpson eyelets provide the exacting tolerances needed to insure
uninterrupted production. These proven industry standards have been developed over time to meet almost any production requirement.
“Tag and Polybag” Flat Flange Eyelets
Eyelet
O.D.
A3730
A1951
A168
A34
A2491
A35
A2658
A36
A38
A558
.194/.188
.195/.190
.196
.215/.205
.245
.260/.250
.341
.342
.343
.356
“Button & String Envelope” Eyelets
L.U.F.
Flange
Dia.
MT
Metal
.089
.093
.095
.092
.095
.132
.115
.092
.131
.110
.256
.254
.250
.330
.324
.375
.450
.460
.468
.475
.0115
.0115
.008
.008
.010
.008
.008
.008
.009
.010
Z
Z
A,B,Z
B
Z
B,S,Z
A,B,S
A,B,Z
B,Z
B,Z
Eyelet
A3576
A3577
A22
A1119*
O.D.
.148/.140
.151/.147
.148/.140
.151/.147
L.U.F.
Flange
Dia.
MT
Metal
.148
.117
.149
.117
.218
.225
.218
.225
.008
.008
.007
.008
B
B
B,Z
B
Rolled Flange Eyelets for “Ribbons, Folders,
Financial & Legal Documents”
Eyelet
A740
A942
A211
A737
O.D.
.185
.185
.185
.185/.175
L.U.F.
Flange
Dia.
MT
Metal
.102
.145
.147
.182
.285
.312
.285
.285
.009
.008
.010
.010
A,B,S
A,B,S,Z
A,B,S,Z
B,S,Z
Eyelets for the Apparel Industry
Stimpson Apparel Eyelets are made to industry standards with decorative
flanges as well as popular finishes such as nickel, brass, and various
shades of antique bronze.
ANTIQUE BRONZE
PLATING
JAPANNING
Industr y Standards - Washers
Industr y Standards - Eyelets
Eyelet
O.D.
L.U.F.
Flange
Dia.
MT
Metal
Washer
Eyelet
A2058
A942
A289
A618
A500
A928
.183
.185
.215
.273
.332
.413
.142
.145
.165
.185
.185
.250
.300
.312
.390
.450
.593
.750
.010
.008
.008
.008
.010
.014
B,S
A,B,S
A,B,S
A,B,S
A,B,S
A,B,Z
C62
C63
C790
C83
C84
C85
A2058
A942
A289
A618
A500
A928
Dimensions - Inches
8
I.D.
.218
.188
.220
.289
.359
.453
O.D.
.375
.375
.463
.546
.700
.835
MT
Metal
.011
.011
.009
.012
.012
.014
B
B,S
B
A,B,S
A,B,S
A,B,Z
Terminology: O.D. = Outside Diameter, I.D. = Inside Diameter, L.U.F. = Length Under Flange; MT = Metal Thickness
A = Aluminum, B = Brass, S = Steel, Z = Zinc
* Indicates Scored Eyelet
Eyelets with two diameter measurements indicate a tapered barrel.
Snap Fasteners
SET D4617
Ring Snap Sets
(24 Line)
SET D4902
(20 Line)
D4543
CAP
Cap
Diameter
.598
15.19
CE®Rivets
Length
Under Cap
.177
4.50
D4511
SET D4862
Rivet
(20 Line Long)
D4861
D4861
Cap
Diameter
.510
12.95
CE® 75 Series - Roll Setting
Length
Under Cap
.142
3.61
Cap
Diameter
.510
12.95
D4858
Length
Under Cap
.142
3.61
75
75
75
75
2/16
3/16
4/16
5/16
D4858
D4547
D4859
D4859
D4629
D4902
D4862
CE®
CE®
CE®
CE®
CE®
CE®
CE®
CE®
STUD
Head
Diameter
.562
14.27
Length
Under Head
.239
6.07
Head
Diameter
.495
12.57
Length
Under Head
.179
4.55
Head
Diameter
.495
12.57
Length
Under Head
.234
5.94
The combinations displayed are a representation of the variety of quality
Snap Fasteners offered by Stimpson.
Most Snap Fasteners are available in both brass and steel, with varying
sized posts to accommodate material thickness. Popular finishes include
nickel, dull black chemical, and military specified colors.
Stimpson Ring Snaps conform to MIL-F-10884, MS 27980 and MS 27981.
100
100
100
100
100
100
100
100
5/32
7/32
4/16
5/16
6/16
7/16
8/16
9/16
123
123
123
123
L.U.H.
.091
.091
.091
.091
.190
.190
.190
.190
.125
.187
.250
.312
Shank
Dia.
Head
Dia.
L.U.H.
.120
.120
.120
.120
.120
.120
.120
.120
.218
.218
.218
.218
.218
.218
.218
.218
.156
.218
.250
.312
.375
.437
.500
.562
Shank
Dia.
Head
Dia.
L.U.H.
.142
.142
.142
.142
.312
.312
.312
.312
.250
.312
.375
.437
CE® 123 Series - Scored Setting
Rivet
CE®
CE®
CE®
CE®
Head
Dia.
CE® 100 Series - Roll Setting
Rivet
SOCKET
POST
CE®
CE®
CE®
CE®
Shank
Dia.
4/16
5/16
6/16
7/16
CE® 125 Series - Roll Setting
ROLLED RIM GROMMET &
SPUR WASHER
Rivet
CE®
CE®
CE®
CE®
CE®
CE®
CE®
125
125
125
125
125
125
125
3/16
4/16
5/16
6/16
7/16
8/16
9/16
Shank
Dia.
Head
Dia.
.142
.142
.142
.142
.142
.142
.142
.312
.312
.312
.312
.312
.312
.312
FLG. DIA.
L.U.H.
LUF
INS. DIM.
OUTSIDE DIM.
ROLLED FLANGE
WITH CLOSED END
FLG. DIA.
LUF
O.D.
.187
.250
.312
.375
.437
.500
.562
FLAT FLANGE
WITH OPEN END
FLG. DIA.
LUF
O.D.
CE®Rivets are made from brass and steel. They can be plated in a nickel,
brass, antique bronze or a variety of other finishes. Designed for today’s
light to medium riveting applications, CE®Rivets are
uniform, strong and coil better than conventional
tubular rivets. A full line of foot, electric and pneumatic
machines support their application.
CE-RIVETS
HEAD DIA.
SHANK
DIA.
LUH
9
SPOT RIVETS
O.D.
Sheet Metal Grommets with
Plain, Teeth and Neck Washers
Stimpson Grommets and Washers are available in brass, aluminum or zinc; in their base metal
or with popular finishes such as nickel, dull black chemical, and military specified colors.
Many sizes are also available in stainless steel. And because Stimpson maintains the largest
inventory of Grommets and Washers in the industry, even orders calling for popular finishes
may be in stock and ready for immediate shipment.
All Stimpson Grommets and Washers are made in the U.S.A., meet the latest military
and commerical specifications and are supported by a full line of grommeting machines.
Sheet Metal Grommet Dimensions
Flange
Dia.
L.U.F.
MT
3/16”
1/4”
9/32”
9/32”
3/8”
3/8”
7/16”
1/2”
5/8”
13/16”
.425
.545
.687
.680
.815
.840
.970
1.050
1.220
1.750
.135
.175
.185
.263
.215
.260
.295
.375
.330
.232
.009
.012
.012
.0126
.013
.016
.014
.016
.016
.020
Washer
#00W
#0W
#1W
#1W
#2W
#2W
#3W
#4W
#5W
#6W
Teeth Washer Dimensions
Grommet
Size
Washer
#0TW
#1TW
#1TW
#2TW
#2JTW
#3TW
#4TW
#5TW
#0G
#1G
#1JG
#2G
#2JG
#3G
#4G
#5G
Grommet
Size
I.D.
#00G
#0G
#1G
#1JG
#2G
#2JG
#3G
#4G
#5G
#6G
.218
.289
.359
.359
.453
.453
.530
.585
.740
.875
I.D.
O.D.
MT
.290
.350
.350
.468
.468
.545
.593
.720
.570
.680
.680
.840
.840
.945
1.050
1.190
.0115
.014
.014
.012
.016
.013
.016
.017
Washer
Grommet
Size
#00NW*
#0NW*
#1NW*
#1NW*
#2NW*
#2NW*
#3NW*
SHEET METAL GROMMET
#4NW*
#00G
#0G
#1G
#1JG
#2G
#2JG
#3G
#4G
Sheet Metal Grommets - Can be used interchangeably with plain, teeth or neck washers.
LUF
Plain Washers - Basic reinforcement, providing support for the grommet setting.
Teeth Washers - A firmer, tighter grasp, particularly in woven materials.
Neck Washers - Telescoping, barrel to barrel setting, reinforces the hole with two entire parts.
Sheet Metal
GrommetsPLAIN WASHERPlain Washers
SHEET METAL GROMMET
SHEET METAL GROMMET
PLAIN WASHER
PLAIN WASHER
TeeTEETH
th WWASHER
ashers
NNECK
eck WASHER
Washers
TEETH WASHER
TEETH WASHER
OD
OD
FLG
OD
FLG
OD
OD
OD
LUF
LUF
LUF
LUF
FLG
ID
ID
ID
ID
ID
ID
Hole Size is the approximate measurement after setting. All dimensions are in inches.
* Indicates Scored Eyelet
10
NECK WASHER
NECK WASHER
TELESCOPING EYELET & NECK WASHER
TELESCOPING EYELET & NECK WASHER
TELESCOPING EYELET & NECK WASHER
LUF
.460
.546
.700
.700
.835
.835
.955
1.062
1.205
1.828
MT
.009
.010
.012
.012
.012
.012
.013
.013
.0135
.020
ROLLED FLANGE
Flange
Dia.
L.U.F
MT
.425
.531
.705
.705
.840
.840
.945
PLAIN WASHER
1.050
.125
.100
.105
.105
.095
.095
.125
.125
.010
.010
.010
.010
.013
.013
.014TEETH WASHER
.015 O D
OD
ID
ID
PACKAGING: Normally Grommets and
Washers are
shipped
inWASHER
bulk, however
TELESCOPING
EYELET
& NECK
they may also be packed in 1, 5 or 10
gross boxes at FLG
additional cost. Self-Piercing
Grommets
LUF and Washers are packed 500
pieces to a box at no additional cost.
FLAT FLANGE
FLG
LUF
GOVERNMENT CONTRACLUF
TS: Stimpson
OD
Grommets andFLG
Washers conform to U.S.
Military specifications and may be ordered
by Military Type and Class Numbers.
SHOE EYELET
FLAT FLANGE
SHOU
FLG
FLG
FL
FLAT FLANGE
FLAT FLANGE
FLG
FLG
FLG
O.D.
Neck Washer Dimensions
FLG
OMMET
R
Hole
Size
Grommet
#00G
#0G
#1G
#1JG
#2G
#2JG
#3G
#4G
#5G
#6G
Plain Washer Dimensions
FLG
FLG
Self-Piercing Grommets & Washers
QUICK RIVETS
SPOT RIVETS
SIDE PRONG RIVETS
POST
FLG
HD
DIA
OD
HEAD DIA
LG OF HEAD
LUF
LUF
LG
OF
PRONGS
"No Hole Needed" Stimpson Self-Piercing Grommets are made from heavier gauge brass than
OD
traditional sheet metal grommets and, when set with their matching washers, pierce and set in a
single action without the need for a pre-punched hole. Just place the grommet in the top set, lay
Self Piercing Grommet and Washer
STANDARD
HOLE PLUG
the washer on
the bottom
set, position your work and pierce and set in one action.
LG
OF
PRONGS
FLG
Stimpson Self-Piercing Grommets and Washers
are available
in brass only but can be furnished
ELECTRICAL
KNOCKOUT PLUG
with a nickel or dull black chemical finish and can be used with Stimpson's "no hole needed"
tooling or with the existing
self-piercing tooling widely available in the marketplace.
HEAD DIA
FLG
LUF
LUF
FLG
HEAD DIA.
FLG
LUF
HEAD
THICKNESS
HEAD
HEIGHT
LENGTH
LENGTH
OVERALL
OVERALL
The Stimpson 405 bench press is especially well suited
for setting Stimpson Self-Piercing Grommets and Washers
in most lightweight materials.
TUBING HOLE PLUG
LUF
ID
OD
HEAD
DIA.
Self-Piercing Grommet Dimensions
Grommet
PLAIN WASHER
#0SPG
#1SPGO D
#1XLSPG
#2SPG
#3SPGI D
Hole
Size
Flange
Dia.
1/4”
5/16”
5/16”
3/8”
7/16”
.550
.630
.630
.750
.970
L.U.F.
TEETH WASHER
TELESCOPING EYELET & NECK WASHER
OD
ID
Self-POVERALL
iercing Washer Dimensions
LENGTH
HEAD
HEIGHT
.165
.200
.320
.200
.185
MT
Washer
Grommet
Size
I.D.
O.D.
MT
.015
.015
.015
.015
.015
#0SPW
#1SPW
#1SPW
#2SPW
#3SPW
#0SPG
#1SPG
#1XLSPG
#2SPG
#3SPG
.337
.400
.400
.437
.546
.575
.655
.655
.770
.970
.011
.011
.011
.011
.011
Telescoping Eyelets
with Neck Washers
FLAT FLANGE
FLG
FLG
LUF
LUF
LUF
FLG
OD
The eyelet alternative in a telescoping setting. Additional sizes are available.
Telescoping Eyelet Dimensions
SHOE EYELET
Eyelet
A1445
A1181
A1998
A1333
Hole
Size
FLG
.177
.273
.270
.274
Flange
Dia.
L.U.F
.403
.535
.540
.545
.210
.155
TENON
.120
LG
.145
Neck Washer Dimensions
SHOULDER
FLG
MT
SHLD
LG
.0135
.010 O D
.016 O D
.013
Washer
Eyelet
Size
Flange
Dia.
L.U.F
MT
#00NW*
#0NW*
#0NW*
A1334
A1445
A1181
A1998
A1333
.425
.531
.531
.562
.125
.100
.100
.080
.010
.010
.010
.009
Terminology: L.U.F. = Length Under Flange; I.D. = Inside Diameter; O.D. = Outside Diameter; MT= Metal Thickness
LUF
* Indicates Scored Eyelet
OD
11
Rolled Rim Grommets
with Spur Washers
ROLLED RIM GROMMET &
SPUR WASHER
FLG
LUF
Stimpson Rolled Rim Grommets and Spur Washers are available
in brass and zinc, with some sizes also offered in stainless steel.
These parts interlock, their teeth grasping the material, to provide a
rugged, unyielding setting. Offered in popular finishes such as nickel
and dull black chemical.
SHEET METAL GROMMET
PLAIN WASHER
TEETH WASHER
OD
OD
FLG
ID
LUF
OD
ID
Rolled Rim Grommet Dimensions
Grommet
#0RRG
#0LRRG
#0XLRRG
#1RRG
#2RRG
#2XLRRG
#3RRG
#4RRG
#5RRG
#6RRG
#7RRG
#8RRG
D5282
Hole
Size
9/32”
9/32”
9/32”
13/32”
7/16”
7/16”
15/32”
9/16”
5/8”
3/4”
29/32”
1-3/32”
1-1/2”
Flange
Dia.
L.U.F.
.670
.670
.670
.790
.890
.890
.970
1.120
1.285
1.535
1.725
1.865
2.390
.175
.240
.300
.205
.255
.348
.255
.320
.380
.420
.446
.465
.355
Spur Washer Dimensions
MT
NECK WASHER
Washer
LUF
.016
.016
.016
.016
.018
.018
.020
.020
.021
.025
.020
.025
.020
#0SW
FLG
#0SW
#0SW
#1SW
ROLLED
FLANGE
#2SW
FLG
#2SW
#3SW
#4SW
OD
#5SW
#6SW
FLAT FLANGE
FLG
#7SW
#8SW
D5274
Oblong Grommets
& Washers
LUF
LUF
Grommet
Size
I.D.
O.D.
FLG
.345
.345
FLG
.345
.455
SHOE
EYELET
.512
.512
.537
FLG
.645
.777
.875
1.062
1.195
1.560
OD
3/16” x 13/16”
5/16” x 1-7/16”
11/32” x 1-11/16”
5/16” x 3/4”
1/4” x 1-1/8”
1/2” x 13/16”
* Indicates embossed oblong grommet & washer.
12
1.315
2.015
2.375
1.125
1.406
1.405
x
x
x
x
x
x
.665
.915
.965
.690
.565
1.035
.645
.645
.645
.790
.890
.890
.970
1.120
1.270
1.505
1.725LUF
1.910
2.360
.016
OD
.016
.016
.016
.018
.018
.020
.020
TENON
.021
LG
.025
.020
.020
.020
LUF
OD
OBLONG GROMMET & WASHER
FLG
FLG
LUF
LUF
ID
Oblong Grommet Dimensions
A670
A671
A1496
A591
A113
A3537*
FLG
LUF
#0RRG
#0LRRG
#0XLRRG
#1RRG
#2RRG
#2XLRRG
#3RRG
#4RRG
#5RRG
#6RRG
#7RRG
#8RRG
D5282
ID
OD
Flange
Dia
MT
LUF
Stimpson Oblong Grommets and Washers are offered in brass, aluminum, zinc and
stainless steel. Our most popular sizes are displayed below.
Hole
Size
FLAT FLANGE
TELESCOPING EYELET & NECK WASHER
ROLLED RIM GROMMET &
SPUR WASHER
Grommet
ID
OD
Oblong Washer Dimensions
L.U.F
Washer
Grommet
Size
.225
.332
.308
.222
.269
.285
C501
C264
C714
C189
C118
C829*
A670
A671
A1496
A591
A113
A3537*
I.D.
.923
1.532
1.812
.800
1.187
.925
x
x
x
x
x
x
.268
.420
.468
.400
.312
.575
O.D.
1.286
2.010
2.375
1.125
1.437
1.405
x
x
x
x
x
x
.625
.915
.968
.685
.562
1.035
SHOULDER
FLG
SH
L
OD
OD
Gover nment Contracts
Approved, and in many cases, specified...Stimpson Grommets and Washers, Eyelets and Snap
Fasteners, Clamps and Vents are manufactured in the United States of America and meet with the
latest Military and Commercial Specifications.
Whether your product is a tent,
field pack, duffel bag, parachute...
Stimpson products can help you make your quality
products that much better.
We are proud of the quality of our product and service and
look forward to working together with you..
by providing free samples...
making test settings in your products...
quoting attractive pricing...or just by providing a friendly,
knowledgeable voice on the other end of the phone.
MIL-G-16491
NASM16491
MIL-E-20652
MS 20230
HAT VENT & WASHER
MIL-F-10884
MS 27980/81
MATTRESS VENTS
BOOT VENT & WASHER
MAIL BAG GROMMET & WASHER
®
MILITARY SPECIFIED FINISHES
Displayed are some of our most requested items.
Stimpson Cage Code #57771
ISO 9001Certified
Co.
Inc.
1515 SW 13th Court, Pompano Beach, FL 33069
PHONE: (877) 765-0748 • FAX: (954) 545-7440
Web Site: www.stimpson.com
E-Mail: [email protected]
13
Hole Plugs
QUICK RIVETS
SPOT RIVETS
SIDE PRONG RIVETS
FLG
LUF
HD
DIA
HEAD DIA
We’ve chosen some of our LGmost
OF HEADpopular Hole Plugs for display on these pages. However, if you can’t find one to fit
your requirements,
don’t be concerned for we have over 300 additional Hole Plugs to choose from. In addition, new
LUF
LG
Hole Plugs are continually being developed
to meet our customers’
special applications (see page 15 for examples).
OF
LG
PRONGS
OF
PRONGS
Most of
O D our Hole Plugs can be made from brass, steel and #1050 Carbon Steel, as your need requires. Other
metals, such as Stainless Steel, are available for special situations. With minor tooling modifications most parts can
be furnished stamped with your logo, with a different hole size in head, or with one or more prongs removed.
met and Washer
Standard Hole Plugs
STANDARD HOLE PLUG
ELECTRICAL KNOCKOUT PLUG
LUF
Hole Dia
1/8
HEAD DIA
HEAD
HEIGHT
LUF
Hole Dia
5/16
Head Dia
7/16
Hole Dia
5/8
Head Dia
13/16
D2730
Thk of Work
3/64 to 5/64
Head Ht
1/16
Hole Dia
3/8
L Overall
1/4
Head Dia
1/2
D2859
Thk of Work
1/16 to 3/32
Head Ht
5/64
Hole Dia
1-1/4
Head Dia
1-7/16
Head Dia
21/64
LENGTH
OVERALL
Hole Dia
3/4
L Overall
19/64
D3463
Head Ht
3/32
Head Dia
59/64
Thk of Work
1/16 to 3/32
L Overall
11/32
D3159
Thk of Work HEAD DIA. Hole Dia
3/16
3/64 to 5/64
HEAD
THICKNESS
Head Ht
1/16
D3005
Thk of Work
3/64 to 1/16
Head Ht
1/16
Head Ht
5/64
7/16
Head Dia
21/32
Hole Dia
7/8
L Overall
19/64
Head Dia
1-1/16
D3868
Hole Dia
1-3/8
Head Dia
1-9/16
LENGTH
D2783
Head Ht
5/64
Head Ht
5/64
D3560
L Overall
1/4
LENGTH
OVERALL
Thk of Work
3/64 to 1/8
Hole Dia
1
Head Dia
1-9/64
L Overall
19/64
D3632
Hole Dia
1-1/2
Head Dia
1-41/64
L Overall
13/32
D4197
Hole Dia
1-3/4
Head Ht
3/32
Thk of Work
1/32 to 3/32
D2587
Thk of Work
1/32 to 1/16
Head Ht
1/16
Hole Dia
9/32
L Overall
15/64
Head Dia
13/32
D3161
Head Dia
21/32
Thk of Work
1/16 to 3/32
Head Ht
1/16
Head Dia
13/32
Hole Dia
1/2
1/32 to 1/16
HEAD
DIA.
Hole Dia
1/4
L Overall
13/64
Hole Dia HOLE
ThkPLUG
of Work
TUBING
HEAD
HEIGHT
Thk of Work
1/16 to 3/32
Thk of Work
1/64 to1/16
Head DiaOVERALL
Head Ht
11/32
5/64
L Overall
15/64
L Overall
15/64
D2690
D2707
Hole Dia
9/16
Thk of Work
1/32 to 1/16
Head Ht
5/64
L Overall
9/32
D3550
Head Ht
3/32
Head Dia
23/32
Thk of Work
1/64 to 1/16
Head Ht
1/16
Thk of Work
3/64 to 3/32
Head Ht
1/16
L Overall
9/32
D3561
Head Dia
1-5/16
L Overall
21/64
Head Ht
3/32
Head Dia
1-13/16
Head Ht
7/64
D3103
Hole Dia
2
14
Head Dia
1-15/16
Head Ht
3/32
L Overall
11/32
Head Dia
2-1/4
L Overall
11/32
Head Ht
1/8
Thk of Work
1/32 to 1/8
L Overall
23/64
Thk of Work
1/32 to 1/16
All dimensions are in inches
ALL PHOTOS APPROXIMATE
ACTUAL SIZE
Thk of Work
1/32 to 1/8
D4212
Hole Dia
1-5/8
L Overall
13/32
L Overall
17/64
D3558
Hole Dia
1-1/8
Thk of Work
1/8 to 5/32
Thk of Work
1/32 to 1/16
D2666
L Overall
5/16
HEAD
THICKNESS
LENGTH
OVERALL
CE-RIVETS
ANGE
END
Tubing Hole Plugs
HEAD DIA
TUBING HOLE PLUG
SHANK
DIA
LUF
Tube Ins Dia
1/4 to 9/32
D4410
D4149
D4167
LUH
HEAD
DIA.
Tube Ins Dia
3/8
Tube Out Dia
25/64
Tube Ins Dia
29/64
Tube Out Dia
17/32
Tube Out Dia
17/32
LENGTH
OVERALL
HEAD
HEIGHT
Head Dia
25/64
SPOT RIVETS
PRONG RIVETS
HD
DIA
Head Ht
3/32
Head Dia
17/32
L Overall
9/16
D3031
Tube Ins Dia
7/8
HEAD DIA
Head Ht
1/16
Tube Ins Dia
Tube Out Dia
1
Head Dia
17/32
L Overall
25/64
D5608
Tube Out Dia
Head Ht
1/16
L Overall
25/64
1-13/32 Square
F HEAD
LG
OF
PRONGS
LG
OF
PRONGS
Head Dia
63/64
Head Ht
7/32
L Overall
3/4
Head Dia
1-9/16 sq
Head Ht
9/64
L Overall
9/16
Electrical Knockout Plugs
ELECTRICAL KNOCKOUT PLUG
HEAD DIA.
D3683
D3720
Elect KO Size 1/2
HEAD
THICKNESS
Elect KO Size 1
LENGTH
OVERALL
TH
ALL
Head Dia
1-5/64
TUBING HOLE PLUG
Head Dia
1-1/4
L Overall
23/64
Head Thk
1/16
HEAD
DIA.
D3916
Head Dia
2-7/32
LENGTH
OVERALL
D4110
Special Character
Turned in Legs
Head Thk
1/16
L Overall
5/16
Hole Dia
1/2
Head Dia & Ht
21/32-5/64
D5655
Special Character
Sq/Pointed Prongs
L Overall
5/16
Head Thk
5/64
Head Dia
1-1/2
L Overall
11/32
D4455
Elect KO Size 1-1/2
HEAD
HEIGHT
Head Dia
1-13/16
Head Thk
1/16
D3924
Elect KO Size 1-1/4
Thk of Wk
1/32 to 1/16
D3833
Elect KO Size 3/4
L Overall
7/32
Hole Dia
0.92 sq
Head Thk
5/64
Elect KO Size 2
L Overall
23/64
Head Dia
2-11/16
Head Thk
5/64
L Overall
3/8
Stimpson Special Hole Plugs
D4603
Special Character
Prong Variation
Thk of Wk
1/16 to 3/32
Head Dia & Ht
59/64-5/64
Head Dia & Ht
Thk of Wk
1/32 to 3/32 23/32-1/16
L Overall
19/64
D5660
Special Character
Rect/Reverse Legs
D4298
Special Character
Hole in Head
Hole Dia
3/4
Hole Dia
9/16
L Overall
9/32
D5590
Special Character
Extruded Head
Thk of Wk
1/32
Hole Dia
5/8
Head Dia & Ht
13/16
L Overall
19/64
D5617
Special Character
Mesh Top
Thk of Wk
.015 to .020
Head Dia & Ht
13/16-3/64
Hole Dia
5/8
L Overall
15/64
Hole Dia
1-5/32-13/32
®
Thk of Wk
0.093 sq
Head Dia & Ht
1-5/64-1/16
L Overall
23/64
Thk of Wk
Tubing
Head Dia & Ht
1-1/4-1/2 rect
-3/32
L Overall
11/32
Co.
Inc.
15
Vents and Washers
Used in mattresses, rain gear, boots, hats...for air circulation or drainage. Shown with matching washer, where appropriate.
D1918
C528
D4792
C790
D5650
C790
D2084
C755
D2260
C754
D53
C658
D54
C755
D2421
C755
D2263
C754
D3738
C62
D3787
D2228
C754
D3097
C528
D4395
C83
®
Co.
Inc.
ISO 9001Certified
1515 SW 13th Court, Pompano Beach, FL 33069
PHONE: (877) 765-0748 • FAX: (954) 545-7440
Web Site: www.stimpson.com
E-Mail: [email protected]
16
D4019
D5768
A3477
D5573
Washers
Commonly found with our grommets, vents and apparel eyelets, Stimpson
washers also have numerous industrial applications.
CIRCULAR WASHERS
#4 Screw
C148
FLUSH TYPE
#8 Screw
C169
D2971
SQUARE/RECTANGULAR WASHERS
#10 Screw
C145
#4 Screw
C336
CUP TYPE
#8 Screw
C198
OBLONG WASHERS
HOLLOW COUNTERSUNK
#4 Screw
#8 Screw
#10 Screw
C149
C119
C511
#10 Screw
C199
Terminal Washers
D3337
D3019
D1869
D3025
D3085
D4495
Arrows, Hands and Spinners
D770
D2486
D122
D311
D5313
D112
D708
D1144
D4060
D5311
D5312
17
Ferrules, Shells, Caps and Cups
An Endless Variety...
Best described as drawn metal shells with little or no flange, Ferrules can be made in various configurations; straight or tapered,
with a shoulder, closed end, or with almost any size or shape hole in the bottom. The shape of the bottom can vary from flat to
spherical. This limited selection shows the wide range of styles available.
D4578
D5349
D5698
D5611
D4743
D5619
D3625
D755
D754
D753
D752
D2659
D5704
D4959
D4688
D4985
D5642
D5680
D3880
D4391
D5644
D4523
D2557
D5423
D5094
D5278
D3920
D2957
D5476
®
ALL PHOTOS APPROXIMATE ACTUAL SIZE.
Co.
Inc.
ISO 9001Certified
18
1515 SW 13th Court, Pompano Beach, FL 33069
PHONE: (877) 765-0748 • FAX: (954) 545-7440
Web Site: www.stimpson.com
E-Mail: [email protected]
D5119
D128
Clamps & Tips
D225
D1087
D2140
D3405
D2741
D5021
D3525
P466
P568
D4882
D5651
D4396
D3374
D877
D5592
D4456
D3885
D5576
P470
P574
Corners
D4925
P468
D4026
D2103
D2174
D5205
D5588
D2044
D2444
D5625
D5624
D3918
D4885
D5581
D5526
D4132
19
Stimpson Attaching Machines
Quality fasteners need to be supported by quality tooling and attaching machines. Whether your requirements are for a hand
operated bench machine, or a fully automatic dual feed grommeting machine, Stimpson makes available to you the finest quality
products in the marketplace...insuring that your investment in new tooling or a new machine will be a wise one.
The following is intended to be a brief introduction of machinery offered by the Stimpson Company, and therefore not all models
or variations are shown.
For more information regarding Stimpson attaching machines and tooling, please ask to speak to one of our Machinery Customer
Service Consultants, who will be happy to assist you. Additional information is also available on our website at www.stimpson.com.
Note: Safety devices as required are provided with your machine. Safety guards or other operational safety devices provided should
never be removed, disabled or over-ridden during operation since they are designed to reduce the potential of injury to the operator.
*Photographs may vary from actual machines due to minor design changes.
Hand Drive
Used with a wooden or rawhide
mallet, Stimpson Hand Drive Tools
can be used to set most Stimpson
products.
Model 479
Model 479 is a hand feed machine, ideal
where production is limited, available in
either foot, pneumatic or electric power
formats. Also available with steel arm.
Height
Weight
Throat Depth
Stroke
Floor Space
45”
113 lbs.
4”
1-3/8”
14” x 20”
405 Bench Press
Low cost and versatile, the 405
bench press is ideal for smaller
projects or prototype work. It
is especially well suited for
setting Stimpson Self-Piercing
Grommets & Washers in most
lightweight fabrics. Made with
a heavy duty aluminum frame.
Height
Weight
Throat Depth
Stroke
Bench Space
20
12”
10 lbs.
2-3/4”
1-3/4”
3-1/2” x 9”
®
Co.
Inc.
ISO 9001Certified
1515 SW 13th Court
Pompano Beach, FL 33069-4789
(877) 765-0748 • Fax: (954) 545-7440
Web Site: www.stimpson.com
E-Mail: [email protected]
Stimpson
proudly offers the
Edward Segal
line of
Attaching
Machines
Model 3P5
Model 3P5 is a portable pneumatic press
specifically designed for grommet applications. At only 17” tall and 4” wide, this
powerful compact press is capable of
punching a hole in a wide range of industrial fabrics and attaching Stimpson
grommets and washers (sizes #00 - #8),
all in a single cycle. The 3P5 is available
in two versions; one for standard fabrics
and a second for heavier fabrics and
larger grommets. All of the setting tools
are interchangeable, and are simply
threaded in place allowing for fast conversions. This machine is built on a sturdy
welded frame and designed for safe
operation, portability, and ease for use.
Model 83
The Model 83 is a highly versatile machine
that is capable of setting both eyelets
and grommets in light to medium duty
work. This machine can be set up as a
single or dual feed machine for grommet
and washer applications or multiple eyelet
settings. The Model 83 is also available as a
dual revolution machine, to aid in punching
holes through difficult materials.
Model 83 GW
A dual feed, heavy duty grommeting
machine which pierces your material
while it automatically feeds and sets both
the grommet and the washer all with one
tripping of the electric foot switch.
Available for rolled rim grommet sizes #0
to #4 with matching spur washer, and
plain grommet and matching neck or
teeth washer, sizes #00 to #4.
Model SF2
The Model SF2 is a fully automatic
attaching machine tooled for industry
snap fastener components. This machine
is offered for customers looking for an
affordable, reliable solution for snap
fastener applications. The Model SF2 is
a flywheel powered machine and features rotary hoppers, a target light for
locating the snap position on the material, and a mechanical clutch with a nonrepeat mechanism to ensure long-term
safe operation.
Model 92 GW
The Model 92 GW is a duel feed, heavy
duty grommeting machine. It offers the
attractive advantage of being able to
make settings in heavy duty industrial
fabrics by punching out the hole and
then attaching the grommet & washer in
a single cycle. In addition, a material
thickness compensator allows materials
with thickness difference of up to 1/8”
to be set without a setting tool adjustment. Available for grommet & washer
sizes #00 to #4 inclusive.
21
®
Co.
Inc.
ISO 9001Certified
1515 SW 13th Court, Pompano Beach, FL 33069
PHONE: (877) 765-0748 • FAX: (954) 545-7440
Web Site: www.stimpson.com
E-Mail: [email protected]