unico pf - RC Group
Transcription
unico pf - RC Group
UNICO PF UNICO PF: Packaged air cooled liquid chillers for indoor installation, equipped with scroll compressors and plug fan Cooling Capacity: 20 ÷ 265 kW UNICO PF rcgroupairconditioning MAIN FEATURES • Air cooled liquid chiller. • 29 models available, for a wide selection opportunity. • Average step of 10kW. • EER up to 2,73. • ESEER up to 3,84. • Scroll compressors. • R410A Refrigerant charge. • Single or double refrigerant circuit. • Plate type heat exchangers. • Plug fan EC. • Single air circuit. • Suitable for indoor installation. MAIN BENEFITS • Units with two scroll compressors for each refrigerant circuit to reach a high efficiency. • Units with one or two refrigerant circuits. • High ESEER. • Availability of kit for the reduction of the noise. • Availability of pumping groups. • Availability of total or partial heat recovery system. • Plug fan EC for a high efficiency. • Easily of maintenance. • Components dedicated to the safety of the unity. • Eurovent Certification. R410A PLATE EC FANS WITH BRUSHLESS TYPE EC MOTOR The fans electric motors are the brushless type with built-in electronic commutation system (EC) which yield high energy savings during operation in reduced air flow. These electric motors are ensuring high performances, minimum energy consumption and total absence of electromagnetic noise INDOOR INSTALLATION The machines are designed for indoor installation and ducting for air suction and discharge. For outdoor installation the use of the dedicated optional kit is mandatory. The machine must be installed under a cover or anyway protected against atmospherics agent. WORKING LIMITS IN COOLING MODE Chilled water outlet temperature: -12÷20°C Ambient temperature: -10÷45°C 1 9 6 3 2 0 1 3 f i f t y c o o l y e a r s 19632013 fiftycoolyears • RCGROUP SpA • G_CHL_RCW8.4 43 UNICO PF MAIN COMPONENTS FRAMEWORK • Base, self supporting frame and panelling in steel plate with protective surfaces treatment in compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders. • Colour: RAL 9002 COMPRESSORS • Orbiting spiral (SCROLL) hermetic compressors with spiral profile optimized for R410A refrigerant. • ON / OFF capacity control (0 / 100% each compressor). • 2-pole 3-phase electric motor with direct on line starting. • Phase sequence electronic relay. • Crankcase heater. • Electric motor thermal protection via internal winding temperature sensors. • Terminal box with IP54 enclosure class. • Rubber supports. Chillers CONTROL SYSTEM • MP.COM microprocessor system with graphic display for control and monitor of operating and alarms status. The system includes: - Voltage free contact for remote general alarm. - Main components hour-meter. - Nonvolatile “Flash” memory for data storage. - Menu with protection password. - LAN connection. EVAPORATOR • Copper brazed plate type with cover plates, plates and connections in AISI 316 stainless steel: - With single refrigerant circuit for S version machines. - With double refrigerant circuit for D version machines. • Anticondensate insulation made of polyurethane. • Temperature sensors on water inlet and outlet. • Differential water pressure switch for water flow control. • Antifreeze heater. CONDENSING COIL • Heat exchanger coil with internally corrugated copper tubes and high efficiency aluminium fins, specifically developed to provide high heat transfer and lower pressure drops. The combination of two factors, special tubes and fins, allow to optimally combine the following aspects: - Maximum capacity relative to the size of the exchanger. - Minimum charge of refrigerant. - Reduction of the air flow required for the heat exchange. • Sub-cooling circuit to allow a significant increase in cooling capacity. • Frame in galvanized steel. FANS SECTION • Centrifugal fans with backward curved blades, single suction and without scroll housings (Plug-fan). • Brushless type synchronous EC motor with integrated electronic commutated system and continuous variation of the rotation speed. The motor rotation control is obtained with the EC system (Electronic Commutation) that manage the motor according to the 0÷10V proportional signal coming from the microprocessor control. • Maintenance-free bearings • IP54 enclosure class. REFRIGERANT CIRCUIT Components for each refrigerant circuit: • Thermostatic expansion valve. • Electronic expansion valve for models 220 P2 S and 250 P3 S The valve allows high performance and system efficiency thanks to a timely and accurate response to changes in temperature and pressure. The electronic expansion valve exclude the installation of the electromagnetic valve on liquid line. • Sight glass. • Electromagnetic valve on liquid line. The electromagnetic valve is not installed when the electronic expansion valve is present. • Filter dryer on liquid line. • Service valves on liquid line and gas discharge. • Safety valve on low pressure side. • Pressure transducers with indication, control and protection functions, on low and high refrigerant pressure. • High pressure safety switch with manual reset. • Refrigerant circuit with copper tubing with anticondensate insulation of the suction line. • Plastic capillary hoses for pressure sensors connection. • R410A refrigerant charge. ELECTRICAL PANEL In accordance with EN60204-1 norms complete with: • Main switch with door lock safety. • Magnetothermic switch or fuses for each compressor. • Magnetothermic switches for fans or water pumps (if scheduled). • Contactors for each load. • Transformer for auxiliary circuit and microprocessor supply. • Panel with machine controls. • Power supply: 400/3/50. 44 G_CHL_RCW8.4 • RCGROUP SpA • 19632013 fiftycoolyears UNICO PF Chillers OPTIONAL ACCESSORIES UNICO PF SIZE 739 - Pumping group (1 pump) 740 - Pumping group (2 pumps) 756 - Pumping group LN (1 pump) 757 - Pumping group LN (2 pumps) 768 - Chilled water storage tank 150 - LNO kit (noise reduction) 170 - Spring antivibration holders (kit) 172 - Rubber support (kit) 118 - Kit brine A (for glycol solution production up to -6°C) 119 - Kit brine B (for glycol solution production up to -12°C) 460 - Kit for outdoor installation 450 - Desuperheater 451 - 100% heat reclaim 251 - Coils protection nets 351 - Coils with pre-painted fins Condensing coil in special execution 160 - Discharge air plenum with sound attenuators 731 - Safety water flow switch 605 - Compr. power factor capacitor - 0,9 Ambient temperature sensor 81 - Phases sequence control 83 - Compressor operation indicator 88 - Analog set point compensation 1002 - Soft Starter 1003 - Analogic flowmeter 1005 - Power supply analyzer 1009 - Multimeter kit 919 - Clock card 923 - RC-Com MBUS/JBUS Serial board 926 - LON Serial board 931 - BACnet Ethernet - SNMP - TCP/IP Serial board 932 - BACnet MS/TP Serial board 942 - Serial card for GSM Modem 943 - Data Logger 934 - MP.COM expansion card 962 - Kit modem GSM 957 - Plantwatch without modem 930 - Remote graphic terminal kit 889 - Master plant SEQUENCER RC CLOUD PLATFORM C1 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● C2 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● C3 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● C4 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● C5 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● available accessory; - not available accessory 19632013 fiftycoolyears • RCGROUP SpA • G_CHL_RCW8.4 ● available accessory; - not available accessory 45 UNICO PF Chillers TECHNICAL DATA UNICO PF LNO KIT 70% LNO KIT 85% LNO KIT 100% OPTIONAL STANDARD UNICO PF 1. 2. 3. 4. 5. 6. 46 SIZE Cooling capacity (1) Unit power input Evaporator water flow rate Evaporator pressure drop Compressors Quantity Capacity steps Centrifugal fans EC Total air flow External static pressure Air circuits Refrigerant Total refrigerant charge (optional excluded) Gas circuits Power supply Max unit operating current (FLA) Unit starting current (LRA) EER (1) ESEER Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Net weight Hydraulic connections Evaporator IN/OUT - ISO 7/1 – R Evaporator IN/OUT - OD (4) Partial heat recovery-Heating capacity (5) Total heat recovery-Heating capacity (6) Pumping group 1 pump - 2 poles electric motor 2 pump - 2 poles electric motor 1 pump - 4 poles electric motor 2 pump - 4 poles electric motor Water tank - volume Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) dB(A) dB(A) kg 22 P1 S C1 19,6 7,2 3,4 27 scroll 1 1 1 6500 50 1 R410A 5,3 1 400/3/50 21,3 99,3 2,73 3,34 87,1 70,6 370 24 P1 S C1 22,3 8,4 3,8 35 scroll 1 1 1 7000 50 1 R410A 5,3 1 400/3/50 26,6 115,3 2,65 3,27 88,7 72,1 370 28 P1 S C1 26,0 10,2 4,5 37 scroll 1 1 1 8500 50 1 R410A 5,3 1 400/3/50 27,6 122,3 2,56 3,19 92,9 76,3 380 32 P1 S C1 29,4 11,4 5,1 29 scroll 1 1 1 10000 50 1 R410A 5,5 1 400/3/50 31,4 122,9 2,57 3,23 92,1 75,6 390 36 P1 S C1 32,5 13,0 5,6 36 scroll 1 1 1 11000 50 1 R410A 5,6 1 400/3/50 37,7 144,9 2,50 3,09 94,2 77,6 390 42 P1 S C1 37,3 15,9 6,4 36 scroll 1 1 1 12000 50 1 R410A 5,6 1 400/3/50 40,8 178,9 2,35 2,85 96,0 79,4 400 53 P1 S C2 48,1 19,2 8,3 33 scroll 1 1 2 16000 50 1 R410A 9,0 1 400/3/50 51,0 233,6 2,51 3,09 94,8 77,6 630 67 P1 S C2 60,3 24,9 10,4 29 scroll 1 1 2 21000 50 1 R410A 9,5 1 400/3/50 59,7 280,4 2,42 3,75 96,7 79,5 670 Ø Ø mm kW kW 1 1/2" -7,2 26,6 1 1/2" -8,2 30,5 1 1/2" -9,5 35,8 1 1/2" -10,8 40,6 1 1/2" -11,9 45,6 1 1/2" -13,7 53,3 2" -17,6 66,3 2" -22,1 84,0 kW kW kW kW l kW kW m³/h Pa kW/kW dB(A) dB(A) kW kW m³/h Pa kW/kW dB(A) dB(A) kW kW m³/h Pa kW/kW dB(A) dB(A) 0,75 -0,37 -370 19,6 7,2 6500 50 2,73 87,1 70,5 19,0 7,3 5525 36 2,62 83,6 67,0 18,3 7,5 4550 25 2,43 80,4 63,8 0,75 -0,37 -370 22,3 8,4 7000 50 2,65 88,7 72,1 21,6 8,5 5950 36 2,55 85,2 68,6 20,7 8,8 4900 25 2,35 82,0 65,4 0,75 -0,37 -380 26,0 10,2 8500 50 2,56 92,8 76,2 25,2 10,1 7225 36 2,50 89,3 72,7 24,1 10,4 5950 25 2,32 86,1 69,5 0,75 -0,37 -390 29,4 11,4 10000 50 2,57 92,1 75,5 28,5 11,4 8500 36 2,50 88,6 72,0 27,3 11,8 7000 25 2,32 85,4 68,8 0,75 -0,37 -390 32,5 13,0 11000 50 2,50 94,1 77,5 31,5 12,9 9350 36 2,45 90,6 74,0 30,1 13,1 7700 25 2,29 87,4 70,8 0,75 -0,37 -400 37,3 15,9 12000 50 2,35 96,0 79,4 36,2 15,6 10200 36 2,32 92,5 75,9 34,5 15,8 8400 25 2,18 89,3 72,7 1,5 -0,55 -630 48,1 19,2 16000 50 2,51 94,6 77,4 46,7 19,1 13600 36 2,45 91,2 74,0 44,9 19,6 11200 25 2,29 88,2 71,0 1,5 -0,55 -670 60,3 24,9 21000 50 2,42 96,4 79,2 58,7 25,3 17850 36 2,32 93,0 75,8 56,4 25,8 14700 25 2,19 90,1 72,9 kW kW m³/h kPa n. n. n. m³/h Pa n. kg n. V/Ph/Hz A A kW/kW Referred to chilled water temperature 12/7°C – 0% glycol solution; air temperature to the condenser 35°C. Fouling factor of the exchangers 0,043 m²°K/kW. Sound power level [Lw] according to ISO EN 9614 – 2. Average sound pressure level [LPm] 1m far according to ISO EN 3744. Hydraulic connection with grooved end complete with flexible joint and adapter pipe for solder connection. Referred to chilled water temperature 12/7°C – 0% glycol solution; air temperature to the condenser 35°C; water temperature heat recovery 40/45°C – 0% glycol solution. Fouling factor of the exchangers 0,043 m²°K/kW. Referred to chilled water temperature 12/7°C – 0% glycol solution; water temperature heat recovery 40/45°C – 0% glycol solution; Fouling factor of the exchangers 0,043 m²°K/kW. G_CHL_RCW8.4 • RCGROUP SpA • 19632013 fiftycoolyears UNICO PF Chillers TECHNICAL DATA UNICO PF dB(A) dB(A) kg 55 P2 S C2 50,7 19,7 8,7 36 scroll 2 2 2 18000 50 1 R410A 9,3 1 400/3/50 56,5 149,8 2,57 3,36 93,1 75,9 630 55 P2 D C2 50,8 19,6 8,7 21 scroll 2 2 2 18000 50 1 R410A 9,0 2 400/3/50 56,5 149,8 2,59 3,78 93,1 75,9 630 62 P2 S C2 57,0 22,3 9,8 35 scroll 2 2 2 20500 50 1 R410A 9,3 1 400/3/50 61,3 151,4 2,56 3,36 86,8 69,6 690 62 P2 D C2 56,9 22,1 9,8 18 scroll 2 2 2 20500 50 1 R410A 9,0 2 400/3/50 61,3 151,4 2,57 3,00 86,8 69,6 700 71 P2 S C2 59,1 24,8 10,2 35 scroll 2 2 2 23000 50 1 R410A 9,7 1 400/3/50 73,9 179,4 2,38 3,42 89,2 72 700 71 P2 D C2 63,4 25,3 10,9 20 scroll 2 2 2 23000 50 1 R410A 9,3 2 400/3/50 73,9 179,4 2,51 3,23 89,2 72 710 85 P2 S C3 75,6 28,9 13,0 37 scroll 2 2 3 25500 50 1 R410A 13,7 1 400/3/50 86,8 222,7 2,62 3,70 93,9 76 890 85 P2 D C3 75,2 28,8 12,9 23 scroll 2 2 3 25500 50 1 R410A 13,5 2 400/3/50 86,8 222,7 2,61 3,28 93,9 76 890 Ø Ø mm kW kW 2" -18,6 69,3 2" -18,6 69,8 2" -20,9 78,4 2" -20,9 79,4 2" -21,7 89,0 2" -23,3 89,4 -76,1 27,7 104,0 -76,1 27,6 104,0 kW kW kW kW l kW kW m³/h Pa kW/kW dB(A) dB(A) kW kW m³/h Pa kW/kW dB(A) dB(A) kW kW m³/h Pa kW/kW dB(A) dB(A) 1,5 -0,55 -630 50,7 19,7 18000 50 2,57 93,1 75,9 49,3 19,6 15300 36 2,51 89,6 72,4 47,3 20,3 12600 25 2,33 86,4 69,2 1,5 -0,55 -630 50,8 19,6 18000 50 2,59 93,1 75,9 49,4 19,5 15300 36 2,53 89,6 72,4 47,3 20,1 12600 25 2,35 86,4 69,2 1,5 -0,55 -690 57,0 22,3 20500 50 2,56 86,5 69,3 55,4 22,3 17425 36 2,48 83,1 65,9 52,9 22,9 14350 25 2,31 80,2 63,0 1,5 -0,55 -700 56,9 22,1 20500 50 2,57 86,5 69,3 55,3 22,2 17425 36 2,49 83,1 65,9 52,9 22,9 14350 25 2,31 80,2 63,0 1,5 -0,55 -700 59,1 24,8 23000 50 2,38 89,0 71,8 57,4 24,6 19550 36 2,33 85,5 68,3 54,9 25,1 16100 25 2,19 82,5 65,3 1,5 -0,55 -710 63,4 25,3 23000 50 2,51 89,0 71,8 61,5 25,0 19550 36 2,46 85,5 68,3 58,9 25,5 16100 25 2,31 82,5 65,3 2,2 2,2 1,5 1,5 890 75,6 28,9 25500 50 2,62 93,7 75,8 73,6 28,9 21675 36 2,55 90,3 72,4 70,5 29,5 17850 25 2,39 87,2 69,3 2,2 2,2 1,5 1,5 890 75,2 28,8 25500 50 2,61 93,7 75,8 73,2 28,8 21675 36 2,54 90,3 72,4 70,3 29,5 17850 25 2,38 87,2 69,3 LNO KIT 70% LNO KIT 85% LNO KIT 100% OPTIONAL STANDARD UNICO PF 1. 2. 3. 4. 5. 6. SIZE Cooling capacity (1) Unit power input Evaporator water flow rate Evaporator pressure drop Compressors Quantity Capacity steps Centrifugal fans EC Total air flow External static pressure Air circuits Refrigerant Total refrigerant charge (optional excluded) Gas circuits Power supply Max unit operating current (FLA) Unit starting current (LRA) EER (1) ESEER Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Net weight Hydraulic connections Evaporator IN/OUT - ISO 7/1 – R Evaporator IN/OUT - OD (4) Partial heat recovery-Heating capacity (5) Total heat recovery-Heating capacity (6) Pumping group 1 pump - 2 poles electric motor 2 pump - 2 poles electric motor 1 pump - 4 poles electric motor 2 pump - 4 poles electric motor Water tank - volume Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) kW kW m³/h kPa n. n. n. m³/h Pa n. kg n. V/Ph/Hz A A kW/kW Referred to chilled water temperature 12/7°C – 0% glycol solution; air temperature to the condenser 35°C. Fouling factor of the exchangers 0,043 m²°K/kW. Sound power level [Lw] according to ISO EN 9614 – 2. Average sound pressure level [LPm] 1m far according to ISO EN 3744. Hydraulic connection with grooved end complete with flexible joint and adapter pipe for solder connection. Referred to chilled water temperature 12/7°C – 0% glycol solution; air temperature to the condenser 35°C; water temperature heat recovery 40/45°C – 0% glycol solution. Fouling factor of the exchangers 0,043 m²°K/kW. Referred to chilled water temperature 12/7°C – 0% glycol solution; water temperature heat recovery 40/45°C – 0% glycol solution; Fouling factor of the exchangers 0,043 m²°K/kW. 19632013 fiftycoolyears • RCGROUP SpA • G_CHL_RCW8.4 47 UNICO PF Chillers TECHNICAL DATA UNICO PF dB(A) dB(A) kg 107 P2 S C3 96,8 38,6 16,7 36 scroll 2 2 3 32000 50 1 R410A 16,9 1 400/3/50 99,4 279,7 2,51 3,47 98,7 80,8 1080 107 P2 D C3 95,7 38,3 16,4 26 scroll 2 2 3 32000 50 1 R410A 17,3 2 400/3/50 99,4 279,7 2,50 3,15 98,7 80,8 1080 135 P2 S C4 120,0 46,7 20,6 37 scroll 2 2 4 40000 50 1 R410A 20,1 1 400/3/50 119,5 337,3 2,57 3,72 92,6 74 1460 135 P2 D C4 118,0 46,6 20,3 30 scroll 2 2 4 40000 50 1 R410A 20,6 2 400/3/50 119,5 337,3 2,53 3,22 92,6 74 1460 170 P2 S C4 156,0 61,9 26,8 36 scroll 2 2 4 52000 50 1 R410A 24,6 1 400/3/50 155,0 392,2 2,52 3,52 95,9 77,3 1550 170 P2 D C4 154,0 61,6 26,4 33 scroll 2 2 4 52000 50 1 R410A 24,6 2 400/3/50 155,0 392,2 2,50 3,15 95,9 77,3 1550 195 P2 S C4 176,0 71,8 30,3 42 scroll 2 2 4 54000 50 1 R410A 25,7 1 400/3/50 172,4 456,2 2,45 3,50 96,6 78 1600 195 P2 D C4 173,0 72,4 29,8 36 scroll 2 2 4 54000 50 1 R410A 26,0 2 400/3/50 172,4 456,2 2,39 3,03 96,6 78 1600 Ø Ø mm kW kW -76,1 35,5 132,0 -76,1 35,1 132,0 -88,9 43,9 166,0 -88,9 43,2 165,0 -88,9 57,2 214,0 -88,9 56,3 212,0 -88,9 64,5 243,0 -88,9 63,6 247,0 kW kW kW kW l kW kW m³/h Pa kW/kW dB(A) dB(A) kW kW m³/h Pa kW/kW dB(A) dB(A) kW kW m³/h Pa kW/kW dB(A) dB(A) 2,2 2,2 1,5 1,5 1080 96,8 38,6 32000 50 2,51 98,5 80,6 94,3 38,0 27200 36 2,48 95,1 77,2 90,6 38,7 22400 25 2,34 92,0 74,1 2,2 2,2 1,5 1,5 1080 95,7 38,3 32000 50 2,50 98,5 80,6 93,2 37,7 27200 36 2,47 95,1 77,2 89,7 38,5 22400 25 2,33 92,0 74,1 2,2 3,0 3,0 3,0 520 120,0 46,7 40000 50 2,57 90,2 71,6 116,0 47,0 34000 36 2,47 87,8 69,2 111,0 48,5 28000 25 2,29 86,9 68,3 2,2 3,0 3,0 3,0 520 118,0 46,6 40000 50 2,53 90,2 71,6 115,0 46,9 34000 36 2,45 87,8 69,2 110,0 48,5 28000 25 2,27 86,9 68,3 2,2 2,2 3,0 3,0 520 156,0 61,9 52000 50 2,52 95,0 76,4 152,0 61,3 44200 36 2,48 91,9 73,3 146,0 62,4 36400 25 2,34 89,7 71,1 2,2 3,0 3,0 3,0 520 154,0 61,6 52000 50 2,50 95,0 76,4 150,0 61,0 44200 36 2,46 91,9 73,3 144,0 62,1 36400 25 2,32 89,7 71,1 2,2 3,0 3,0 3,0 520 176,0 71,8 54000 50 2,45 95,7 77,1 171,0 71,5 45900 36 2,39 92,6 74,0 163,0 73,4 37800 25 2,22 90,3 71,7 2,2 3,0 3,0 3,0 520 173,0 72,4 54000 50 2,39 95,7 77,1 168,0 71,8 45900 36 2,34 92,6 74,0 160,0 74,1 37800 25 2,16 90,3 71,7 LNO KIT 70% LNO KIT 85% LNO KIT 100% OPTIONAL STANDARD UNICO PF 1. 2. 3. 4. 5. 6. 48 SIZE Cooling capacity (1) Unit power input Evaporator water flow rate Evaporator pressure drop Compressors Quantity Capacity steps Centrifugal fans EC Total air flow External static pressure Air circuits Refrigerant Total refrigerant charge (optional excluded) Gas circuits Power supply Max unit operating current (FLA) Unit starting current (LRA) EER (1) ESEER Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Net weight Hydraulic connections Evaporator IN/OUT - ISO 7/1 – R Evaporator IN/OUT - OD (4) Partial heat recovery-Heating capacity (5) Total heat recovery-Heating capacity (6) Pumping group 1 pump - 2 poles electric motor 2 pump - 2 poles electric motor 1 pump - 4 poles electric motor 2 pump - 4 poles electric motor Water tank - volume Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) kW kW m³/h kPa n. n. n. m³/h Pa n. kg n. V/Ph/Hz A A kW/kW Referred to chilled water temperature 12/7°C – 0% glycol solution; air temperature to the condenser 35°C. Fouling factor of the exchangers 0,043 m²°K/kW. Sound power level [Lw] according to ISO EN 9614 – 2. Average sound pressure level [LPm] 1m far according to ISO EN 3744. Hydraulic connection with grooved end complete with flexible joint and adapter pipe for solder connection. Referred to chilled water temperature 12/7°C – 0% glycol solution; air temperature to the condenser 35°C; water temperature heat recovery 40/45°C – 0% glycol solution. Fouling factor of the exchangers 0,043 m²°K/kW. Referred to chilled water temperature 12/7°C – 0% glycol solution; water temperature heat recovery 40/45°C – 0% glycol solution; Fouling factor of the exchangers 0,043 m²°K/kW. G_CHL_RCW8.4 • RCGROUP SpA • 19632013 fiftycoolyears UNICO PF Chillers TECHNICAL DATA UNICO PF LNO KIT 70% LNO KIT 85% LNO KIT 100% OPTIONAL STANDARD UNICO PF 1. 2. 3. 4. 5. 6. SIZE Cooling capacity (1) Unit power input Evaporator water flow rate Evaporator pressure drop Compressors Quantity Capacity steps Centrifugal fans EC Total air flow External static pressure Air circuits Refrigerant Total refrigerant charge (optional excluded) Gas circuits Power supply Max unit operating current (FLA) Unit starting current (LRA) EER (1) ESEER Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Net weight Hydraulic connections Evaporator IN/OUT - ISO 7/1 – R Evaporator IN/OUT - OD (4) Partial heat recovery-Heating capacity (5) Total heat recovery-Heating capacity (6) Pumping group 1 pump - 2 poles electric motor 2 pump - 2 poles electric motor 1 pump - 4 poles electric motor 2 pump - 4 poles electric motor Water tank - volume Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) Cooling capacity (1) Unit power input Total air flow External static pressure EER (1) Sound power level [Lw] (2) Average sound pressure level [Lpm] (3) dB(A) dB(A) kg 220 P2 S C5 202,0 76,8 34,8 43 scroll 2 2 5 62500 50 1 R410A 49,3 1 400/3/50 194,3 477,0 2,63 3,71 96,6 77,3 1970 220 P2 D C5 199,0 76,8 34,2 37 scroll 2 2 5 62500 50 1 R410A 49,6 2 400/3/50 194,3 477,0 2,59 3,26 96,6 77,3 1970 250 P3 S C5 227,0 93,8 39,0 41 scroll 3 3 5 64000 50 1 R410A 49,9 1 400/3/50 228,1 461,8 2,42 3,84 96,9 77,7 2140 265 P4 D C5 239,0 97,6 41,1 41 scroll 4 4 5 66000 50 1 R410A 60,8 2 400/3/50 225,8 438,5 2,45 3,75 97,4 78,1 2290 290 P4 D C5 264,0 113,3 45,4 45 scroll 4 4 5 66000 50 1 R410A 60,7 2 400/3/50 331,6 607,8 2,33 3,74 97,4 78,1 2340 Ø Ø mm kW kW -88,9 74,2 272,0 -88,9 73,1 277,0 -88,9 83,2 322,0 -88,9 87,7 337,0 -88,9 96,7 383,0 kW kW kW kW l kW kW m³/h Pa kW/kW dB(A) dB(A) kW kW m³/h Pa kW/kW dB(A) dB(A) kW kW m³/h Pa kW/kW dB(A) dB(A) 4,0 5,5 4,0 4,0 720 202,0 76,8 62500 50 2,63 95,3 76,1 197,0 76,4 53125 36 2,58 92,4 73,1 189,0 78,8 43750 25 2,40 90,5 71,2 4,0 5,5 4,0 4,0 720 199,0 76,8 62500 50 2,59 95,3 76,1 194,0 76,7 53125 36 2,53 92,4 73,1 186,0 78,8 43750 25 2,36 90,5 71,2 4,0 5,5 4,0 4,0 720 227,0 93,8 64000 50 2,42 95,8 76,5 219,0 94,4 54400 36 2,32 92,8 73,5 208,0 98,1 44800 25 2,12 90,8 71,5 4,0 5,5 4,0 4,0 720 239,0 97,6 66000 50 2,45 96,4 77,1 231,0 97,5 56100 36 2,37 93,3 74,0 220,0 100,9 46200 25 2,18 91,2 71,9 4,0 5,5 4,0 4,0 720 264,0 113,3 66000 50 2,33 96,4 77,1 254,0 115,5 56100 36 2,20 93,3 74,0 239,0 120,7 46200 25 1,98 91,2 71,9 kW kW m³/h kPa n. n. n. m³/h Pa n. kg n. V/Ph/Hz A A kW/kW Referred to chilled water temperature 12/7°C – 0% glycol solution; air temperature to the condenser 35°C. Fouling factor of the exchangers 0,043 m²°K/kW. Sound power level [Lw] according to ISO EN 9614 – 2. Average sound pressure level [LPm] 1m far according to ISO EN 3744. Hydraulic connection with grooved end complete with flexible joint and adapter pipe for solder connection. Referred to chilled water temperature 12/7°C – 0% glycol solution; air temperature to the condenser 35°C; water temperature heat recovery 40/45°C – 0% glycol solution. Fouling factor of the exchangers 0,043 m²°K/kW. Referred to chilled water temperature 12/7°C – 0% glycol solution; water temperature heat recovery 40/45°C – 0% glycol solution; Fouling factor of the exchangers 0,043 m²°K/kW. 19632013 fiftycoolyears • RCGROUP SpA • G_CHL_RCW8.4 49 UNICO PF Chillers DIMENSIONS (mm) SIZE C C1 C2 C3 C4 C5 a 1250 1800 2600 3700 4950 b 890 1040 1200 1260 1260 c 1950 2000 2000 2000 2040 c b 50 a G_CHL_RCW8.4 • RCGROUP SpA • 19632013 fiftycoolyears