2006 reel catalog

Transcription

2006 reel catalog

2006 reel catalog
Introduction
Day after day, fish after fish, we spend our time
trying to meet the anglers’ needs as well as fulfill their
existing dreams. The products we design take years to
create, from initial concept to the end result—products
that enhance your fishing experience.
No matter if it’s freshwater bass fishing or chasing
giant saltwater gamefish, we share the same
passion. We look for ways to help make every
fishing experience more enjoyable and productive,
with the goal of catching more fish.
The products contained in this catalog are the result
of feedback from fishermen, captains and dealers,
along with our time spent fishing, combined with the
dreams of experienced engineers. This process creates
the very finest reels possible. Our commitment creates
extraordinary products that are there for you, your
experiences and your life-long memories.
www.shimano.com
www.shimano.com
1
The new Curado® D: Redesigned for 2006.
See page 60.
2
www.shimano.com
www.shimano.com
3
4
www.shimano.com
2006 reel catalog
New Products
Conventional Reels
Tiagra ® A, Torsa™, Trinidad ®, Tyrnos™, Torium ®,
Tekota ®, TLD ® II, TLD ®, SpeedMaster ®IV,
TLD ® Star, TR™, Moocher Plus ®
Low Profile Baitcasting Reels
Calais ® A, Chronarch® B, Chronarch®Mg,
Curado® D, Castaic® SF™, Citica ® D, Cruxis™,
Coriolis ® E, Crestfire ® D, Callisto ®
Round Baitcasting Reels
Digital Control™, Calcutta TE ® DC, Calcutta TE ®,
Calcutta ® B, Cardiff ™ A, Corvalus™
6
8
50
74
Spinning Reels
Stella ® FB, Stella ® FA, Sustain ® FD,
Stradic ® MgFA, Stradic ® FH, Symetre® FI,
Symetre® RI, Sahara ® FB, Spirex ® FE,
Spirex ® RE, Sedona ® FB, Sedona ® RB,
Solstace ® FH, Solstace ® RH, Sonora ® FA,
Sienna ® FB, Syncopate ® FD, Sidestab ® RE,
Slade ® FB, TX ® FB, CX ® RB, AX ® FB,
FX ® FB, AX ® RA, FX ® RA, IX ® R
92
Saltwater Spinning Reels
Thunnus ® F, Baitrunner ®B, Spheros ® FA
142
Customer Service
150
www.shimano.com
5
Conventional Features
A-RB® (Anti-Rust Bearings) A-RB bearings are stainless steel
ball bearings that have been through the A-RB treatment
process which makes them at least 10 times more corrosion resistant
than standard stainless steel ball bearings (please see page 102 for more
information).
High Efficiency Gearing (HEG™) HEG consists of not only the
gears, but also the frame, setplate, and handle-side sideplate. First
we increased the size of the drive gear and the pinion gear to offer increased
leverage and power. By using a one-piece frame that incorporates the setplate
and adding a one-piece stamped sideplate, we have eliminated flex in the
drivetrain that causes normal gears to bind under pressure. By eliminating the
flex and increasing the leverage, we are able to provide high-speed retrieves
and deliver an incredible amount of torque, while maintaining the smooth,
silent retrieve Shimano® reels are famous for.
2-Speed Gearing This shifting mechanism is designed so that
gearing changes are quick and easy, even when fighting a fish.
The low gear ratio used for high-power retrieves is selected by pushing
the button on the base of the handle. Return to the high-speed ratio by
sliding the release button along the handle shank. By using two sets of
gears, the drive and pinion gears are always engaged. There is no gear
meshing during the shift.
Super Stopper ® Super Stopper uses a one-way, stainless steel
roller bearing that eliminates backplay. This provides the angler
with instant hooksetting power.
Assist Stopper This is a back up system to the Super Stopper that
consists of the traditional pawl and ratchet. Should the Super Stopper roller
bearing slip due to cold weather or over-lubrication, the Assist Stopper
kicks in to provide a solid hookset the instant the roller bearing begins to
slip. Most of the time the angler will not even know when this feature
engages, because by quickly stopping the backwards rotation of the roller
bearing, the Assist Stopper greatly reduces the chance of permanent
damage to the Super Stopper, allowing it to continue to function as designed.
Twin Pawl Anti-Reverse System uses two pawls for increased reliability
and durability, along with hooksetting power.
Rapid Fire™ Quick Change Drag Cam System allows anglers to change
the drag cam on the reel within seconds. This system changes the drag
curve on the reel to cater to specific techniques or fisheries. Reels
equipped with Rapid Fire come standard with a Long Range Special
(L.R.S.) curve and up to 7 other Rapid Fire cams are available as
accessories. For more information please see pages 24 through 31.
Twin Disk Drag System This system uses two drag washers that surround
a floating drag plate to effectively double the drag surface over traditional
drag systems. On a traditional drag system, a drag plate is pressed against
the drag washer to create drag. On the Twin Disk Drag System, the drag
washer is suspended between two drag plates. This utilizes both sides of
the drag plate and gives twice the drag surface of a single disk system.
Dartainium Drag ® This drag material provides a wider range of drag
settings, along with the smoothest Shimano drag performance ever.
Waterproof Drag With the use of rubber gaskets, the drag is protected
against intrusion of the elements, such as water or sand.
Ratcheting Drag Lever eliminates the chance of the drag lever backing
off due to boat vibration, and the detents serve as a reference point as to
how much the drag has been increased or reduced.
Septon®* This handle grip material is soft to the touch and does not get
slippery when wet.
Offset Ergonomic Power Grip The power grip is offset on multiple axes to
allow natural hand, arm and wrist angle, improving comfort and power.
Ergonomic Power Handle The handle grip, made of non-slip rubber, is
formed to provide maximum comfort and allows the angler to apply a
high amount of torque when fighting a fish.
8
3-Position Power Grip This unique handle grip was designed with two
goals in mind: comfort and function. The ergonomic contours of this handle
not only allow the angler to grip the handle like a typical barrel for
maximum torque, but also enable the user the utilize a two or three finger
grip similar to one on a paddle grip to easily work topwater plugs or rapidly
gain line.
Rubber Handle Grip is comfortable and soft to the touch.
Adjustable Handle Shank For deep water situations or for anglers needing
more leverage, the handle shank can be extended to increase the
amount of power that can be applied to the retrieve.
Optional Double Paddle Handle This allows the angler to purchase, as
an accessory, a double paddle handle for certain applications.
Counter Balanced Handle These single grip handles feature an extended
shank with a counter-balancing weight on the opposite end of the grip.
This reduces the amount of wobble during high-speed retrieves.
Reduced Profile Top Crossbar not only gives the angler better access to
the spool for line control, but also allows baits or lures to be dropped back
into the spread without having to remove the reel from the rod holder.
Palmable Linecounter with Maintenance Port Comfortably rests
between the thumb and forefinger when palming the reel, providing
depth readings in feet. The reset button is strategically located for easy,
one-handed resets, yet prevents accidental resets. Inserting one drop of
lightweight oil into the sealed maintenance port keeps the linecounter
performing in top condition.
Crossbar Forward Design Allows more access to the spool for better line
control, and provides more comfort when palming the reel.
Non-Disengaging Levelwind System On wide-spool reels with a nondisengaging levelwind system, the levelwind remains engaged during the
cast allowing the levelwind to track back and forth with the line as it
flows off of the spool. This eliminates the drastic line angles caused by
a disengaging levelwind system that can cause extreme friction which
can lead to short casts or frustrating backlashes. By doing this we have
increased the efficiency of the cast, allowing for more distance with
less effort.
Adjustable Clicker This clicker system allows the angler to adjust the
amount of freespool tension while the clicker is on.
Clicker When engaged, the clicker increases the tension in freespool
and activates a clicking alarm to alert you when a fish bites.
Oversized Clicker Button The button is larger and makes it easier to turn
on and off.
Oversized Cast Control Knob Comfortable and easy to use.
Permalube®** lubrication improves freespool while maintaining protection
and durability of moving parts.
Chrome Plated Sideplate Screws The sideplate screws are chrome plated
to prevent corrosion between the screws and sideplate.
Metal Series The metal construction showcased in
some of our finest reels now appears throughout our
line of Metal Series products. Metal frames not only keep moving parts in
precise alignment, they also feature the use of the latest anodizing, plating
and painting techniques for beautiful and durable finishes.
Platinum Service Plan With the Platinum Service Plan,
when you submit your Warranty Registration Card, you
will receive coupons for discounts on “clean and lubes” (from half off to
free!) Also included are Priority Shipping Labels guaranteeing a 48-hour
turnaround time from participating Shimano Satellite Service Centers.
*Septon® is a registered trademark of Kuraray Co., Ltd.
**Permalube ® is a registered trademark of Amoco Oil Company, Corporation
www.shimano.com
Conventional Reels
www.shimano.com
9
10
®
Tiagra
The Tiagra® 12 is considered a true light line reel. Optimized for
®
Tiagra 12 & 16 Drag Curves
12lb test, the gradual drag curve allows light line fishermen to quickly
back off of the drag on a running fish, without having to worry about
accidentally dropping into Freespool. Whether it’s world record fishing,
or light tackle tournaments, this reel is built with light line anglers’
needs in mind.
14.0
Drag Force (lbs.)
12.0
®
The Tiagra 16 was designed with a Long Range Special (L.R.S.)
style drag curve made popular with the Tiagra 50WLRS, and also features
a twin disk drag system to achieve 29.5 pounds of drag at Full while still
maintaining Freespool. This L.R.S. style curve is very steep allowing
anglers to take advantage of the incredible maximum drag settings that the
reel is capable of, while also providing a wide range of drag settings in
between Strike and Freespool. The Tiagra 16 is the ultimate reel for fishing
with today’s braided superlines.
F E AT U R E D
8.0
TI-12
TI-16
6.0
4.0
2.0
0.0
g
ol
spo Warnin
Full
ke
Stri
Free
Lever Position
H I G H L I G H T S
• Machined Aluminum Frame
•
10.0
• Clicker increases the tension on Freespool and activates a
clicking alarm when a fish bites.
Machined Aluminum Sideplates
• Metal Series Metal frames keep moving parts in precise
• Cold Forged Aluminum Spool
alignment for increased efficiency and durability.
• Rod Clamp
• Offset Ergonomic Power Grip The power grip is offset on multiple
axes to allow natural hand, arm and wrist angles to improve
comfort and power (not available on TI12 or TI16.)
• Ergonomic Power Handle (only on model 12 and 16 models)
comfortable, non-slip grip provides maximum comfort
and torque.
• A-RB® (Anti-Rust Bearings) are specially treated stainless steel
• Chrome Plated Sideplate Screws The sideplate screws are chrome
plated to prevent corrosion between the screws and sideplate.
• Ratcheting Drag Lever eliminates the chance of the drag lever
backing off due to boat vibration, and the detents serve as a
reference point as to how much the drag has been increased
or reduced.
• Twin Pawl Anti-Reverse System uses two pawls for increased
reliability and durability along with hooksetting power
ball bearings that are at least 10 times more corrosion resistant
than standard stainless steel ball bearings.
• Twin Disk Drag System (only on models 16 and 130 models)
uses two drag disks and a floating drag plate to effectively
double the drag surface which provides a wide range of drag
settings and increased durability.
Tiagra
®
TI 16
TI 12
Full
Strike
A-RB
Max
Max
Ball
Drag (lb) Drag (lb) Bearings
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Braided Line Capacity
(Diameter in/yd)
TI12
36/16
12/880, 16/650, 20/460
50/540 w/ 30/60
33.0
23.0
TI16
36/16
16/980, 20/670, 30/430
65/540 w/ 40/60
29.5
22.0
Model
www.shimano.com
High
Gear
Ratio
Low
Gear Weight
Ratio
(oz)
6
3.9:1
1.7:1
34.6
$409.99
6
3.9:1
1.7:1
37.9
$439.99
MSRP
11
12
®
Tiagra A
The Tiagra® 20A and Tiagra® 30A feature traditional-style drag
Tiagra® 20A, 30A & 30WLRSA Drag Curves
30.0
25.0
Drag Force (lbs.)
curves. These curves allow the angler full use of the Warning position of
the lever by providing an area of low drag pressure just above Strike. This
is perfect for holding baits in the wake yet has light enough pressure so
that when a fish bites it reduces the chance of pulling the hooks out of
the fish’s mouth. The Tiagra 30A’s curve is steeper than the 20A, allowing
anglers to still reap the benefits of the Warning position yet be able to
reach higher drag pressures when fishing heavier lines.
20.0
TI-20A
TI-30A
TI-30WLRSA
15.0
10.0
The Tiagra® 30WLRSA utilizes our L.R.S. style drag curve. This
5.0
curve allows the reel to fish extremely heavy lines and drag pressures
where the angler is not as concerned about using a Warning position. By
starting the curve directly from the Freespool position, it gives the angler a
wider variety of useable drag settings.
0.0
g
ol
spo Warnin
Full
ke
Stri
Free
Lever Position
TI 30WLRSA
TI 30A
TI 20A
Tiagra A
®
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Braided Line Capacity
(Diameter in/yd)
Full
Max
Drag (lb)
TI20A
41/18
20/690
65/570 w/ 40/120
36.0
Strike
A-RB
High
Max
Ball
Gear
Drag (lb) Bearings Ratio
30.0
4
3.9:1
Low
Gear Weight
Ratio
(oz)
1.7:1
49.7
MSRP
$489.99
TI30A
41/18
30/700
80/590 w/ 50/120
34.0
25.0
4
3.9:1
1.7:1
52.4
$509.99
TI30WLRSA
41/18
50/570
80/800 w/ 60/120
34.0
25.0
4
3.9:1
1.7:1
55.6
$549.99
www.shimano.com
13
14
®
Tiagra A
®
®
The Tiagra 50A and Tiagra 50WA use traditional drag curves.
The curve for both models is identical. This curve allows a slow consistent
drag increase from Warning to Strike. It also allows use of a Warning
position, by having a steep transition from Freespool to the 1/4 position.
This is helpful when trying to hold baits within a trolling pattern yet having
a light enough drag to avoid pulling the hook from a biting fish’s mouth.
®
Drag Force (lbs.)
Tiagra 50A, 50WA, 50WLRSA, 80WA Drag Curves
The Tiagra® 50WLRSA was the first reel to feature an L.R.S. style
curve. This allows big game seeking anglers to size down in tackle yet
fish the high drag pressures normally associated with large reels. The
TI50WLRSA and TI80WA use the same drag curve and can achieve the
same drag pressures. So if you prefer smaller reels and braided line, the
Tiagra 50WLRSA is right for you. For those that use monofilament or
desire more line capacity the Tiagra 80WA is the reel of choice.
45.0
40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
0.0
TI-50A
TI-50WA
TI-50WLRSA
TI-80WA
g
ol
spo Warnin
ke
Stri
Free
Full
Lever Position
TI 80WA
TI 50WLRSA
TI 50WA
TI 50A
Tiagra A
®
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Full
Max
Drag (lb)
Strike
Max
Drag (lb)
A-RB
Ball
Bearings
High
Gear
Ratio
Low
Gear
Ratio
Weight
(oz)
MSRP
TI50A
37/15
50/600
37.5
28.5
4
3.1:1
1.3:1
83.4
$549.99
TI50WA
37/15
50/850
37.5
28.5
4
3.1:1
1.3:1
86.3
$629.99
TI50WLRSA
37/15
80/550
44.0
35.0
4
3.1:1
1.3:1
86.3
$629.99
TI80WA
37/19
80/950
44.0
35.0
4
2.5:1
1.3:1
115.2
$829.99
www.shimano.com
15
16
®
Tiagra A
The Tiagra® 130A combines the finest materials available with
®
Tiagra 130A & Optional Blue Marlin Cam
Drag Force (lbs.)
technology and experience gained from years of producing our smaller
sized Tiagras. Machined from 9mm thick aluminum pipe stock, with a
twin disk drag system that can produce up to 99lbs. of drag, the Tiagra
130A is a monster to battle monsters.
The drag curve is a gradual line that allows full advantage of the wide
range of drag settings generated by the TI130A. This curve is optimized
for battling giant tuna, sharks and billfish.
Also available is the optional Blue Marlin Cam. By changing this cam
(we recommend that installation be performed by one of our Satellite
Service Centers) it alters the drag curve. The Blue Marlin Cam’s curve
allows the angler to quickly drop the drag pressure on a running marlin
without having to worry about accidentally hitting Freespool. This is done
by making the first half of the curve extremely shallow, then jumping
into a steep curve to the Full position. The steep section is used for
fighting fish, while the shallow section serves as a “landing pad” for
quick drag reductions.
80.0
70.0
60.0
50.0
40.0
30.0
20.0
10.0
0.0
TI-130A
Blue Marlin Cam
g
ol
spo Warnin
Full
ke
Stri
Free
Lever Position
The Blue Marlin Cam for the Tiagra 130A is available as an accessory.
The part number is TT 0467 and is available from Shimano or any
Satellite Service Center for $39.99 MSRP.
Captain’s Kits
Tiagra® Captain’s Kits are available for the maintenance of select
Tiagra models. These kits are designed to be taken with you on
a long-range trip, or kept on your boat for on-the-water maintenance.
Kits include ball bearings, drag washers, drag plates, click plates,
screws, springs, gears, grease and oil.
Model Number
Fits Reels
MSRP
TI20
$135.99
TI30CAPT
TI30, TI30WLRS
$135.99
TI50CAPT
TI50, TI50W, TI150WLRS
$135.99
TI20CAPT
TI80WCAPT
TI80
$142.99
TI130CAPT
TI130
$254.99
TI 130A
Tiagra A
®
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Full
Max
Drag (lb)
Strike
Max
Drag (lb)
A-RB
Ball
Bearings
High
Gear
Ratio
Low
Gear
Ratio
Weight
(oz)
MSRP
TI130A
39/22
130/1000
99.0
79.0
6
2.2:1
1.15:1
174.1
$1,199.99
www.shimano.com
17
Imagine a saltwater reel with
more speed, more power,
more versatility, and better
castability.
Dream no longer. Introducing
the Shimano® Torsa™.
18
www.shimano.com
19
High SPEED
High POWER
20
Speed and Power
When designing Torsa™, one main goal was to
redefine all current ideas about speed and power.
Traditionally, lower gear ratio means more power,
and higher gear ratio means less power.
1
This remained true until the release of the
Trinidad®. Trinidad was equipped with High
Efficiency Gearing (HEG™) which, by using a rigid
platform and oversized gears, proved that the
dream of High Speed with High Power was a reality.
So with the release of Torsa, Shimano included
the largest gear they could build. This gear is 22%
larger than the Trinidad drive gear and 67% larger
than the venerated TLD®25.
The amount of power generated by Torsa’s
drivetrain, oversized handle shank and Ergonomic
Power Grip is unbelievable. Along with today’s
super braided lines, it will usher in new meaning to
“sizing down” to tackle powerful gamefish.
2
Also contributing to the Power of the reel is a Super
Stopper ® one-way roller bearing with Assist Stopper
back-up ratchet anti-reverse system. The system
has no backplay for solid hooksetting power and
the reliability of two anti-reverse systems.
The oversized drag washer, can generate
incredible drag pressures for a reel its size, and is
created using the same proven material used in
the Tiagra® series of 2-Speed lever drag reels.
[1] This extremely smooth cranking helically cut drive
gear is the largest in Shimano® reel history, and provides
unbelievable power along with a high speed retrieve.
[2] Because of the oversized sideplate and spool, Torsa™
is able to accommodate an extremely large drag washer
in relation to the size of the reel. This washer, made of
the same proven material found in Tiagra®, provides an
incredible range of drag pressures, while providing low
startup inertia for an extremely smooth drag.
[3] The Ergonomic Power Grip provides comfort and
reduces fatigue, while the extremely long handle shank
increases torque. Also, by bending the shank at strategic locations, the grip moves closer to the reel to
reduce wobble during fast retrieves.
[4] Just like when trying to jack up a car, a longer lever
means more power. Increasing the size of the gears
effectively gives the angler a longer lever, as shown in
illustration 4. This results in a High Speed reel with
unbelievably High Power.
3
4
Standard gear size vs.
Torsa HEG™ gear size
21
Castability
22
Castability
Once again, Shimano® set out to change another
aspect of the reputation of lever drags:
Poor Castability.
Due to how lever drags are constructed, they are
inherently poor casters. The drag washers, drag
plates, cooling shields and bearings are included
in the spool assembly. This increases the overall
weight of the spool.
A heavy spool is bad for castability because it
takes much more energy to get the spool to
begin to spin. This is called startup inertia. Why
is this bad? Once the spool begins to spin, the
resistance drops rapidly. So there is a very
inconsistent spool speed and an excellent chance
for backlash.
As a result of the typical lever drag design,
the lob cast evolved. This casting style was
pioneered by the Long Range fishermen out of
San Diego to cast large baits to feeding
Yellowfin. However, for most other applications,
anglers were forced to use Star Drag reels when
they needed to cast small baits, due to their
excellent castability.
With Torsa™, the tables are turned.
[1] Intricate machining of the
spool reduces the overall weight
of the spool for lower startup
inertia. This means it takes less
energy to get the spool spinning
for less chance of backlash. The
machining is more drastic at
the center of the spool, which
effectively distributes the mass
outward. The result is similar to a
bicycle wheel, where most of the
mass is in the tire. This allows the
spool to continue to spin longer.
First, because of meticulous machining of the
Cold Forged Aluminum spool, the overall weight
of the spool was reduced to lower the startup
inertia. At the same time, most of the mass is
distributed outward. This results in the spool
spinning longer, just like a bicycle wheel, where
the tire and rim contain most of the wheel’s mass.
Secondly, Shimano added the Variable Brake
System (VBS®) which, since 1992, has proven
itself time and time again in their freshwater
baitcasting reels, such as the Calcutta®,
Chronarch® and Curado®, to help anglers with
castability. VBS uses centrifugal force to slow
down the spool at the beginning of the cast,
then reduces the braking force as the spool
slows. This gives a much more consistent
spool speed, which translates into a more
manageable cast.
And lastly, the handle side of the spool is taller
than the non-handle side. This extended spool
lip gives the angler a very consistent surface
to thumb during the cast. It has shown to
be valuable in testing, as it provides more
manageability than thumbing the inconsistent
surface of the line on the spool.
[2] Torsa is equipped with a
4-weight Variable Brake System
(VBS®). These weights are driven
outward by centrifugal force at
the beginning of the cast to slow
down the spool’s rotation. As the
spool slows, the brakes retreat,
allowing the spool to continue to
spin. This provides the angler
with a more consistent spool
speed, which means a much
more manageable cast.
www.shimano.com
[3] The spool lip on the handle
side of the reel is higher than
the non-handle side of the reel.
This aids in castability by giving
the angler a smooth, consistent
surface to thumb the spool,
rather than thumbing the line
itself. This results in a more
manageable cast.
23
™
RAPID FIRE
quick change drag
cam system
24
www.shimano.com
Rapid Fire™ Quick Change
Drag Cam System
The amount of drag that is increased or
decreased when the drag lever is moved
can be easily described as the “drag curve.”
Most drag curves throughout the fishing reel
industry are very similar: a gradual increase
in drag pressure from the freespool position
to the full position.
While a standard curve is excellent for many
mainstream fisheries, the shape of the curve
is not adjustable (see sidebar “Understanding
Lever Drags”). Therefore, in order to “fish
outside of the box,” such as with light lines or
to target specific fish, anglers were forced to
evolve their techniques and style around the
tackle available to them.
No longer.
With the new Rapid Fire Quick Change Drag
Cam System found exclusively on Torsa™, this
versatile reel can change to cater to specific
techniques. By simply putting the reel into
freespool and backing off the preset knob, the
angler removes the drag cam from the reel.
Then, by inserting one of 8 available Rapid
Fire drag cams, you completely change how
the reel is set up to fish within a matter of
seconds. No tools required, and no screws to
fall onto the deck of the boat.
On the next several pages, you will see these 8
different drag curves and the specific fisheries
they are applicable to. From light line world
record seekers, to braided line fanatics looking
to tackle huge fish on small tackle, to the
specific needs of chunk fishermen in the
Northeast, Torsa can do it all.
Torsa™ comes equipped with our L.R.S. (Long
Range Special) Rapid Fire Drag Cam, which
was made popular by reels in our Tiagra® line.
There are 7 other cams available at your Torsa
retailer depending upon your target fisheries.
Understanding Lever Drags
Lever drag reels have the advantage of being able to quickly
and precisely increase or reduce drag depending on the
circumstances. However, the amount of drag applied through
the lever’s travel (the drag curve) is fixed, thereby limiting the
effectiveness of the reel.
[1] This is an example of a typical lever drag curve that has
about 8 pounds of drag at Strike. From freespool to full, the
drag increases on a fairly predictable curve.
[2] If you’re fishing with heavier line and you tighten the preset
knob by 2 pounds at the Strike position, you increase the drag by 2
pounds at EVERY position. However, this is at the expense of lost
freespool (see left end of drag curve). This is not an ideal situation.
[3] If you’re fishing with lighter line and you loosen the preset
knob, you decrease the drag overall. However, the drag lever
has to travel through three-quarters of its range before any
drag is applied at all. This is not ideal, either.
www.shimano.com
25
Long Range
Special
Primary Application
All purpose
Recommended line
20- to 65-pound test
This cam comes standard on all sizes of Torsa™. It is an
“all-around” curve with many uses. The L.R.S. curve was
originally designed for the Tiagra® for anglers on the Long
Range boats out of San Diego. These anglers required high
maximum drag capabilities in smaller reels to catch large
Yellowfin Tuna in standup situations. The result is a steep
curve to allow use of heavy lines while maintaining freespool.
12# Light Line
Special
Primary Application
Light line tournaments
Recommended line
This light line cam is optimized for 12# monofilament. It is
designed for anglers in tournaments with line limits or bonus
point situations for line class. The Warning position provides
1/4 pound of drag and remains relatively flat to the 1/2
position. This is to allow the angler to quickly back off of the
drag on a running fish without accidentally dropping into
freespool. While higher drag can be used, the curve is not
26
optimal for that type of fishing, as by raising the preset Strike
drag above the target settings will result in a loss of
freespool. Without a light line specific drag curve, anglers
who use traditional curves may find that the reel will go into
freespool between the Warning and 1/2 positions, which
results in a loss of drag adjustability.
www.shimano.com
6# Light Line
Special
Primary Application
World record attempts
Recommended line
6- to 10-pound test
Similar in concept to the L.L.S. 12# Cam, the L.L.S. 6# curve
is optimized for 6# test. It is best suited for 6-10# line. This
will primarily be used by world record seeking anglers using
extremely light line. When set to 2-3 pounds of drag at Strike,
the warning position will be between 0.15 and 0.25 pounds
and remain relatively flat to the 1/2 position. This will allow
the angler to safely back off drag pressure on a running fish
without falling into freespool, backlashing and losing the fish.
50# Bottom
Fishing Special
Primary Application
Bottom fishing near structure
Recommended line
This curve will primarily be used in the Gulf of Mexico when
bottom fishing next to heavy structure like Oil Platforms.
Typically, when a fish bites, the boat runs away from the
structure to set the hook and to move the fish away from the
structure to reduce cut offs. The angler places a tremendous
amount of drag on the fish to move it away from the structure
quickly at the risk of breaking the line. As soon as the angler
moves the fish or turns it’s head, he will then quickly back off
the drag to the Strike position at 1/3-1/2 the breaking
strength of the line. The flat area just before until just after
the Strike position allows the angler to quickly get back to the
Strike setting without having to worry if they have gone too far
or not far enough. This cam is ideal for 50-80 pound test.
www.shimano.com
27
20# Bottom
Fishing Special
Primary Application
Bottom fishing near structure
Recommended line
This curve will be used in wreck or reef fishing situations
where the angler is moving large fish away from structure.
When fishing, the angler needs to place a tremendous
amount of drag on the fish to move it away from the
structure quickly. As soon as the angler moves the fish or
turns it’s head, he will then quickly back off the drag to the
Strike position at 1/3-1/2 the breaking strength of the line.
From here until he lands the fish, he will fight it with a
traditional drag range and not go back into the full position
again, unless the fish begins to run back into the structure.
This cam allows a very high Full position setting, but quickly
backs off to a safe area at the Strike setting so that the
angler does not accidentally back off too much drag.
Kingfish Special
Primary Application
Kingfish trolling
Recommended line
This is a shallow curve designed for Kingfish. Kingfishing
involves light lines and light drag pressures so that the hooks
do not rip from the fish’s mouth. It is a very gradual curve to
give anglers extra adjustability with a target Strike drag of 4
pounds. The range of settings with this curve are from 3-5
28
pounds at Strike which is optimal for use with 10-20 pound
test. There is also a large flat spot after warning to be used
to aid the clicker when trolling and to allow the angler to
quickly back off of the drag on a running fish without
dropping into freespool.
www.shimano.com
White Marlin
Special
Primary Application
Atlantic White Marlin
Recommended line
This cam will be used to drop back baits to White Marlin in
the Mid-Atlantic to North East regions of the United States.
The curve, when set at a target Strike drag of 8 pounds will
provide 1/4 pound of drag from warning to the 1/2 position.
This allows the angler to quickly drop the tension on a run-
ning fish while using light line. The fighting area of the curve
is from 1/2 to Strike. The section of the curve from Strike to
Full is very steep to provide a heavy drag setting of 15
pounds to quickly end the fight on a subdued fish for more
successful releases.
Chunk Fishing
Special
Primary Application
Atlantic Tuna with chunk baits
Recommended line
This cam will be used when fishing for Tuna with chunk
baits in the Northeastern United States. Chunk fishing
typically is performed in heavy currents. The slow ramp from
Warning to 1/2 is designed to hold the float and chunk in the
current. For small baits/floats in light current the Warning
position is optimal. When baits are bigger or currents are
stronger, the angler can move up to the 1/4 position to hold
the bait in place. The sudden steep section allows the angler
to quickly get enough drag for a solid hookset. Optimal Strike
drag settings range from 5-7 pounds.
www.shimano.com
29
30
www.shimano.com
1
2
3
4
Follow these simple steps to change your Rapid Fire™
drag cams:
[1] Move the drag lever to Free
[2] Unscrew the drag cam
[3] Seat and thread on the new cam
[4] Move the drag lever to Strike. Scale and adjust
drag as necessary
www.shimano.com
31
TS
3
0
TS
2
0
TS
1
6
TS
1
6N
Specifications
Line Retrieve
Per Crank (in)
43.0
43.0
43.0
43.0
Line Capacity
(# Test/yd)
14/300, 16/270,
20/200
16/450,
20/320
20/420,
25/300
25/420,
30/350
Gear Ratio
5.8:1
5.8:1
5.8:1
5.8:1
Weight (oz)
28.6
29.1
30.2
31.1
Frame, Spool and
Sideplate Material
Forged & Machined Aluminum (all models)
A-RB® Bearings
8 BB + 1 RB (all models)
Super Stopper®
Yes (all models)
Assist Stopper
Yes (all models)
Ratcheting Drag Lever
Yes (all models)
Ergonomic Power Handle
Yes (all models)
Clicker
Yes (all models)
Metal Series
Yes (all models)
Platinum Service Plan
Yes (all models)
MSRP
$669.99
$679.99
$689.99
$699.99
Fu
0.0
0.0
1.5
18.7
8.3
30.8
12.3
34.1
L.L.S. 6
$49.99
Optimal
Max
0.0
0.0
0.2
19.4
2.0
26.4
5.5
30.8
L.L.S. 12
$49.99
Optimal
Max
0.0
0.0
0.2
14.3
4.0
19.8
11.0
26.4
B.F.S. 20
$49.99
Optimal
Max
0.0
0.0
1.0
13.2
7.0
20.9
12.0
24.2
B.F.S. 50
$49.99
Optimal
Max
0.0
0.0
2.0
8.4
18.0
22.0
30.0
39.6
K.F.S.
$49.99
Optimal
Max
0.0
0.0
0.3
16.5
4.0
22.0
8.0
26.4
C.F.S.
$49.99
Optimal
Max
0.0
0.0
0.3
11.4
7.0
22.0
15.0
39.6
W.M.S
$49.99
Optimal
Max
0.0
0.0
0.3
1.8
8.0
9.5
15.0
22.0
www.shimano.com
ee
ll
St
rik
e
Optimal
Max
M
32
ng
Comes
with reel
ni
W
ar
L.R.S.
SR
Fr
P
sp
oo
l
Drag Settings
Other features
Bearings
®
• A-RB (Anti-Rust Bearings) are made of Stainless Steel
that has been through the A-RB process.
• At least 10 times more corrosion resistant than standard
Stainless Steel ball bearings.
• Easy Maintenance—no shield design allows for easy
flushing of debris and easy lubrication.
• Increased Bearing Speed—no shield design and lighter
viscosity lubrication reduce friction and allow the bearing
to spin faster and longer.
Super Stopper® with Assist Stopper
Super Stopper Super Stopper uses a one-way, stainless
steel roller bearing that eliminates backplay. This provides
the angler with instant hooksetting power.
Assist Stopper This is a back up system to the Super
Stopper that consists of the traditional pawl and ratchet.
Should the Super Stopper roller bearing slip due to cold
weather or overlubrication, the Assist Stopper kicks in to
provide a solid hookset the instant the roller bearing
begins to slip. Most of the time the angler will not even
know when this feature engages, because by quickly
stopping the backwards rotation of the roller bearing, the
Assist Stopper greatly reduces the chance of permanent
damage to the Super Stopper allowing it to continue to
function as designed.
Forged and Machined Aluminum
Components
The frame, sideplates and spool are made from aluminum,
which is first cold forged and then machined. This results
in extremely dense, rigid parts that not only allow the
anodization to adhere more deeply for corrosion protection,
but also provide a solid, unflexing platform for tight
tolerances and precision performance.
www.shimano.com
33
34
®
Trinidad
F E AT U R E D
H I G H L I G H T S
• Forged Aluminum Frame
• Clicking Drag Adjustment reduces the chance of the drag
backing off at light settings while providing the angler a
reference point to how much drag they add or reduce by
turning the star.
• Stamped Aluminum Right Sideplate
• Aluminum Left Sideplate
• Aluminum Spool
• Rubber Handle Grip is comfortable and soft to the touch.
• Manual Clutch Lever
• Adjustable Clicker allows the angler to adjust the amount of
freespool tension while the clicker is on.
• Rod Clamp (except TN16)
•
• Ergonomic Power Handle comfortable, non-slip grip provides
A-RB ®
(Anti-Rust Bearings) are specially treated stainless steel
maximum comfort and torque.
• Counter Balanced Handle (only on TN12 and TN14) by
placing a weight on the opposite side of the handle shank from
the grip, wobble during the retrieve is eliminated.
• Super Stopper ® is a one-way roller bearing that eliminates
backplay for solid hooksets.
• Adjustable Handle Shank (except TN12 and TN14) allows the
• Assist Stopper is a back-up anti-reverse system that
angler to use the handle in the short position for fast retrieves, or
the extended position for more cranking power.
reduces the stress placed on the one-way roller bearing to
increase durability.
• High Efficiency Gearing (HEG™) is not only the oversized gears,
but also includes the setplate and sideplate, which allow for a high
speed retrieve while providing unbelievable fish-moving torque.
• Chrome Plated Sideplate Screws The sideplate screws are
chrome plated to prevent corrosion between the screws
and sideplate.
• Dartainium® Drag material provides a wide range of drag setting
and the smoothest Shimano® drag performance ever.
TN12
TN14
TN16
TN20
TN16N
TN30
TN40
TN50
TN40N
®
Trinidad
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TN12
36
12/300, 14/420, 16/220
14.7
6
1
6.2:1
15.0
$329.99
TN14
36
14/300, 16/270, 20/200
14.7
6
1
6.2:1
15.3
$349.99
TN16N
46
14/300, 16/270, 20/200
16.5
6
1
6.2:1
19.8
$389.99
TN16
46
16/450, 20/320
16.5
6
1
6.2:1
19.9
$379.99
TN20
46
20/420, 25/300
16.5
6
1
6.2:1
20.4
$399.99
TN30
46
25/420, 30/350
16.5
6
1
6.2:1
20.9
$419.99
TN40N
44
20/440, 25/330, 30/275, 50/165
33.0
6
1
4.9:1
28.0
$449.99
TN40
44
30/470, 40/320
33.0
6
1
4.9:1
29.3
$439.99
TN50
44
40/490, 50/440
33.0
6
1
4.9:1
30.0
$459.99
www.shimano.com
35
36
Tyrnos™
F E AT U R E D
H I G H L I G H T S
• Graphite Sideplates with Aluminum Braces reduce weight
while maintaining strength.
• Ergonomic Power Handle comfortable, non-slip grip provides
• Reduced Profile Top Crossbar provides excellent control when
dropping back baits or lures when trolling.
maximum comfort and torque.
• Loud Clicker has enough tension to hold large baits.
• High Speed 5.0:1 Gear Ratio
• Ratcheting Drag Lever eliminates lever movement due to
• Oversized Gears for increased power.
boat vibration.
• Diecast Aluminum Frame for strength and durability.
• Metal Series metal frames keep moving parts in precise
• Oversized Handle Shank for increased torque.
• Alternating Twin Pawl Anti-Reverse Design for reliability and
hooksetting power with minimal backplay.
TYR30
TYR20
Tyrnos™
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Full
Max
Drag (lb)
Strike
Max
Drag (lb)
A-RB
Ball
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TYR20
45
20/700, 30/450, 40/330
33.0
16.5
4
5.0:1
36.0
$249.99
TYR30
45
30/600, 40/450, 50/350
33.0
16.5
4
5.0:1
38.1
$259.99
www.shimano.com
37
38
®
Torium
F E AT U R E D
• Diecast Aluminum Frame
H I G H L I G H T S
• High Efficiency Gearing (HEG™) is not only the oversized
gears, but also includes the setplate and sideplate, which
allow for a high speed retrieve while providing unbelievable
fish-moving torque.
• Aluminum Braced Graphite Non-Handle Side Plate
• Aluminum Spool
• Oversized Cast Control Knob comfortable and easy to use.
• Clicker increases the tension on freespool and activates a
• Rod Clamp
®
• A-RB (Anti-Rust Bearings) are specially treated stainless steel
• Oversized Clicker Button easy to turn on and off.
®
• Three-Position Power Grip This Septon * coated handle
grip allows for 3 different hand positions for various
fishing techniques.
®
• Super Stopper is a one-way roller bearing that eliminates
backplay for solid hooksets
• Adjustable Handle Shank allows the angler to use the handle in
the short position for fast retrieves, or the extended position for
more cranking power.
®
• Dartainium Drag material provides a wide range of drag
settings and the smoothest Shimano® drag performance ever.
TOR30
TOR16
TOR20
Torium
®
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TOR16
46
16/450, 20/320
16.0
3
1
6.2:1
22.4
$169.99
TOR20
46
20/420, 25/300
19.0
3
1
6.2:1
22.8
$179.99
TOR30
46
25/420, 30/350
19.0
3
1
6.2:1
23.3
$189.99
®
*Septon is a registered trademark of Kuraray Co., Ltd.
www.shimano.com
39
40
®
Tekota
F E AT U R E D
H I G H L I G H T S
• Oversized Clicker Button easy to turn on and off.
• Counter Balanced Handle (excluding models 700 and 800) By
placing a weight on the opposite side of the handle shank from
the grip, wobble during the retrieve is eliminated.
• Aluminum Braced Graphite Non-Handle Side Plate
• Aluminum Spool
• Adjustable Handle Shank (only models 700 and 800) allows the
• Rod Clamp
angler to use the handle in the short position for fast retrieves, or
the extended position for more cranking power.
• Manual Clutch (excluding 500LC and 600LC which are
Auto-Return)
• Optional Double Paddle Handle allows the angler to purchase,
®
as an accesory, a double paddle handle for certain applications
(Available on 500, 500LC, 600 and 600LC only).
• Non-Disengaging Levelwind System Allows the levelwind to
®
track back and forth during the cast which reduces drastic
line angles that cause unwanted friction and backlashes on
wide-spool reels.
• Palmable Linecounter with Maintenance Port (only 500LC
and 600LC) allows for comfortable palming of the reel, easy
maintenance of the counter mechanism, and easy,
one-handed resets.
®
settings and the smoothest Shimano® drag performance ever.
• Crossbar Forward Design allows more access to the spool
• Oversized Cast Control Knob comfortable and easy to use.
for better line control and provides more comfort when
palming the reel.
®
• Septon * this handle grip material is soft to the touch and does
not get slippery when wet.
TEK500
TEK500LC
TEK600LC
TEK600
TEK700
TEK800
®
Tekota
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TEK500
25
12/440, 14/340, 16/285
18.0
3
1
4.2:1
15.3
$159.99
TEK500LC
25
12/440, 14/340, 16/285
18.0
3
1
4.2:1
16.3
$169.99
TEK600
25
16/390, 20/300, 25/240
18.0
3
1
4.2:1
16.0
$169.99
TEK600LC
25
16/390, 20/300, 25/240
18.0
3
1
4.2:1
16.9
$179.99
TEK700
33
25/410, 30/350, 40,290
24.0
3
1
4.2:1
28.8
$179.99
TEK800
33
25/530, 30/450, 40/370
24.0
3
1
4.2:1
29.8
$189.99
Model
®
www.shimano.com
41
42
®
TLD I
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
• Graphite Side Plates
• Rod Clamp
• Barrel Handle Grip
• Aluminum Spool
TLD30II
TLD20II
TLD50II
TLD50IILRS
®
TLD II
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Full
Max
Drag (lb)
30.0
Strike
Max
Drag (lb)
22.0
A-RB
Ball
Bearings
20/700, 30/450, 50/250
37/16
20/800, 30/600, 40/450, 50/350
TLD
50II
38/15
50/700
37.0
29.0
4
3.5:1
1.4:1
56.0
$429.99
TLD
50ILI RS
38/15
80/440
42.0
32.0
4
3.5:1
1.4:1
56.0
$429.99
www.shimano.com
4.0:1
1.7:1
34.5
MSRP
37/16
4
1.7:1
Weight
(oz)
TLD
30II
24.0
4.0:1
Low
Gear
Ratio
TLD
20II
33.0
4
High
Gear
Ratio
35.8
$309.99
$319.99
43
H I G H L I G H T S
TLD
®
F E AT U R E D
• Graphite Frame
• Aluminum Spool
• Rod Clamp
• Counter Balanced Handle (only on TLD® 15) By placing a weight
on the opposite side of the handle shank from the grip, wobble
during the retrieve is eliminated.
TLD15
TLD25
TLD20
®
TLD
Model
44
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Full
Max
Drag (lb)
Strike
Max
Drag (lb)
A-RB
Ball
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TLD
15
30
20/450, 25/350, 30/300
22.0
15.0
4
4.0:1
18.6
$129.99
TLD
20
32
20/700, 30/450, 40/330
23.0
17.0
4
3.6:1
23.6
$149.99
TLD
25
32
30/600, 40/450, 50/350
22.0
17.0
4
3.6:1
24.5
$169.99
www.shimano.com
Charter Special
F E AT U R E D
H I G H L I G H T S
• Graphite Frame
• Aluminum Spool
• Barrel handle Grip
®
• Counter Balanced Handle By placing a weight on the opposite
side of the handle shank from the grip, wobble during the
retrieve is eliminated.
• Ratcheting Drag Lever eliminates the chance of the drag lever
backing off due to boat vibration, and the detents serve as a
reference point as to how much the drag has been increased
or reduced.
TR1000LD
TR2000LD
®
Charter Special
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Full
Max
Drag (lb)
Strike
Max
Drag (lb)
A-RB
Ball
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TR1000LD
26
12/390, 14/330, 17/250
33.0
22.0
4
4.2:1
16.4
$119.99
TR2000LD
26
14/480, 17/400, 20/300
33.0
22.0
4
4.2:1
17.1
$119.99
www.shimano.com
45
SpeedMaster V
I
®
F E AT U R E D
H I G H L I G H T S
• Graphite Frame
• Aluminum Spool
TSM IV
®
Speedmaster IV
46
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TSMIV
44
20/480, 25/390, 30/330
11.0
3
6.0:1
17.6
$109.99
www.shimano.com
TLD Star
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
• Aluminum Spool
ball bearings are at least 10 times more corrosion resistant than
standard stainless steel ball bearings.
TLD 15/30S
TLD 20/40S
®
TLD Star
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TLD
1530S
38
20/360, 25/290
13.2
2
5.2:1
16.8
$99.99
TLD
2040S
38
20/480, 25/390, 30/330
13.2
2
5.2:1
17.6
$99.99
www.shimano.com
47
™
F E AT U R E D
H I G H L I G H T S
TR
• Graphite Frame
• Graphite Sideplates
• Aluminum Spool
• Manual Clutch
• Barrel Handle Grips
side of the handle shank from the grip, wobble during the retrieve
is eliminated.
• Non-Disengaging Levelwind System Reduces drastic line angles
for less friction and chance of backlash.
• Three Position Power Grip The Septon ® coated handle grip
allows for 3 different hand positions for various fishing techniques.
TRN100G
TRN200G
TR™
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Gear
Ratio
TRN
100G
25
12/390, 14/330, 17/250
14.0
1
4.3:1
TRN
200G
25
14/480, 17/400, 20/300
14.0
1
4.3:1
Weight
(oz)
MSRP
12.5
$59.99
13.2
$59.99
®
48
www.shimano.com
Moocher Plus
F E AT U R E D
H I G H L I G H T S
• Graphite Frame
• Graphite Spool
®
• Waterproof Drag is sealed against the intrusion of the elements,
such as water or dust.
MCR2000GTP
®
Moocher Plus
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
MSRP
MCR2000G
TP
14
14/470, 17/400, 20/340
4.4
$54.99
MCR4000G
TP
14
20/520, 25/420
4.4
$64.99
www.shimano.com
49
Low Profile Baitcasting eFatures
A-RB® (Anti-Rust Bearings) A-RB bearings are stainless
steel ball bearings that have been through the A-RB
treatment process which makes them at least 10 times more corrosion
resistant than standard stainless steel ball bearings (please see page 102
for more information).
High Efficiency Gearing (HEG™) HE
Gconsists of not only the
gears, but also the frame, setplate, and handle-side sideplate.
iFrst we increased the size of the drive gear and the pinion gear to offer
increased leverage and power. By using a one-piece frame that incorporates
the setplate and adding a one-piece stamped sideplate, we have eliminated
flex in the drivetrain that causes normal gears to bind under pressure. By
eliminating the flex and increasing the leverage, we are able to provide
high-speed retrieves and deliver an incredible amount of torque, while
maintaining the smooth, silent retrieve Shimano® reels are famous for.
Magnumlite™ Spool This spool provides extremely low startup inertia for increased
line control and casting performance even when using lightweight baits or lures.
This is accomplished through using lightweight aluminum alloys and a unique
design that moves the mass of the spool outward.
Lo-Mass™ Drilled Spool System Lo-Mass rDilled Spool System is designed
for anglers who require longer casts and can sacrifice line capacity to do so.
The Lo-Mass spool features a large arbor that is cross-drilled to reduce its weight. By
moving the arbor of the spool outward, the mass of the spool is closer to the rim of the
spool. Like a lightweight bicycle wheel, where most of the mass lies in the tire, the
majority of a Lo-Mass spool lies in the arbor and the line it is spooled with.
A7075 Aluminum Spool These Lo-Mass spools are made of lightweight A7075
aluminum. Combining this material with an aggressive porting pattern results in
an extremely light weight spool. This allows for low startup inertia for casting
lightweight baits and an overall increase in useable freespool.
A6063 Aluminum Spool By using A6063, we are able to increase the corrosion
resistance of the spool. This is especially important with the use of today's braided
superlines which tend to stay on the reel longer and retain water.
®
Variable Brake System (VBS ) VBS uses centrifugal force rather than
magnets to aid in controlling the cast. The individual brake weights, when
turned on, are forced outward at the beginning of the cast when backlashes
most often occur, causing friction that reduces the speed of the spool. n
Oce
the spool speed begins to slow, the pressure lessens, allowing the spool to continue
spinning. The result is a much more consistent spool speed that is easier to
manage and takes advantage of the reel’s maximum casting distance. Settings
range from zero weights turned on for true freespool and up to 6 weights turned on
for extremely windy conditions and maximum cast control.
Reduced Mass VBS Hub reduces the weight of the spool, increasing freespool
and reducing start up inertia.
Spare Brake Weight Block Holds up to 2 extra brake weights for more adjustability.
Easy Mag® This magnetic cast control system can actually allow for a true
freespool setting. iW
th traditional magnetic systems, the magnets are moved away
from the spool. So, even at the zero setting, the magnets still apply some force
upon the spool. iW
th aEsy Mag, the magnets are rotated away from the spool and
towards each other. At the zero setting, the magnets face each other and cancel
themselves out, applying zero force to the spool.
Super Free (SF™) The Super rFee bearing-supported pinion gear system
(SF
) was designed to eliminate friction on the spool shaft during the cast. nI
standard baitcasting reels, when the clutch bar is pressed down, the pinion
gear is freed and can actually drag on the spool shaft, creating friction and limiting the length of the cast. iW
th SF
, the pinion gear is supported by a ball bearing,
and when the clutch is disengaged the pinion gear and spool shaft are kept in precise
alignment. The result is zero friction on the spool shaft for increased freespool.
Escape Hatch By flipping a switch, the sideplate swivels downward, giving
the angler quick access to adjust the VBS weights. The switch is located in
a position that is easy to use, yet remains out of the way to prevent accidental
opening. The sideplate is smooth for comfort when palming the reel.
Turn-Key Access Sideplate By flipping up the Turn-Key on the sideplate and rotating
it counter-clockwise, the sideplate can be opened for quick VBS adjustments.
1/4 Turn Easy Access Sideplate An improvement over the already easy-to-use Turn-Key
access, with the 1/4 Turn aEsy Access Sideplate, the fisherman flips up the Turn-Key on
the sideplate, then rotates it 1/4 turn to open the sideplate for quick VBS adjustments.
Greaseless Spool Support Bearings These bearings, which support the spool during
freespool, are lubricated with a lightweight oil rather than grease. This allows the
bearings to have a lower start-up inertia and a faster rotation, which provides
awesome freespool.
50
Tapered Levelwind Insert This levelwind insert is coated with titanium, improving
the durability of the insert by increasing abrasion resistance. tI also reduces friction
on the line for increased casting distance and reduced line wear. The tapered
design not only makes it easier to thread the line through when setting up the reel,
but also further reduces friction and line angles during the cast for more distance.
Ion Plated Finish This finish is extremely durable and is more scratch- and
corrosion-resistant than paint.
Super Stopper ® Super Stopper uses a one-way, stainless steel
roller bearing that eliminates backplay. This provides the angler
with instant hooksetting power.
Assist Stopper This is a back up system to the Super Stopper that consists of
the tradition pawl and ratchet. Should the Super Stopper roller bearing slip due
to cold weather or over-lubrication, the Assist Stopper kicks in to provide a solid
hookset the instant the roller bearing begins to slip. Most of the time the angler
will not know when this feature engages, because by quickly stopping the
backwards rotation of the roller bearing, the Assist Stopper greatly reduces the
chance of permanent damage to the Super Stopper, allowing it to continue to
function as designed.
Instagage® I A useful feature for flipping and pitching, n
I stagage features two thumb
bars. The lower bar disengages the clutch, while the top bar engages the drivetrain.
iW
thout even turning the handle, the angler can instantly put the reel in gear.
I stagage
Instagage® II This feature brings all of the benefits of the original n
feature by allowing the angler to engage and disengage the clutch using only the
thumb. However, it uses a one-piece thumb bar, providing more access
to the spool. This makes threading line though the line guide easier, and it gives
the angler’s thumb more room to control the spool during the cast or other
freespool applications. There is also more room to clear backlashes.
Dartainium® Drag This drag material provides a wider range of drag settings,
along with the smoothest Shimano drag performance ever.
Clicking Drag Adjustment The micro-click mechanism prevents the drag from
backing off when set at light settings, and provides the angler a reference when
adjusting the drag.
Oversized Clicking Cast Control Knob The large size is easy to use, while the
clicking adjustment allows for precision settings.
Clicking Cast Control Adjustment The micro-click mechanism in the Cast Control
serves two purposes. The first is that it prevents the cast control from backing off
when set at light settings. The second purpose is to allow the angler a point of
reference when adjusting the cast control setting.
Cold Forged Handle Shank Cold forging allows more metal to be used in a much
more dense construction. This means the handle can be made in a smaller profile
with more strength and also allows for deeper anodization for protection from the
elements.
Drilled Handle Shank Reduces the weight of the reel without sacrificing strength.
PV Power Paddles These oversized paddle grips provide extra power and remain
comfortable after a full day of deep cranking.
SV Power Paddles These are the largest of the paddle grips and provide extra
fish fighting power when battling feisty inshore species.
Septon®* This handle grip material is soft to the touch and does not get slippery
when wet.
Recessed Reel Foot By recessing the reel foot further into the frame, the reel sits
lower in the reel seat. This allows for a much more palmable feel when the reel is
mounted on a rod than traditional frame designs. oNt only does it increase the
comfort level, but because of the lower profile in the reel seat, it makes the reel
much more maneuverable with casting styles such as underhand and roll casts.
Metal Series The metal construction showcased in some of our
finest reels now appears throughout our line of Metal Series
products. Metal frames not only keep moving parts in precise alignment, they
also feature the use of the latest anodizing, plating and painting techniques for
beautiful and durable finishes.
Platinum Service Plan iW
th the Platinum Service Plan, when
you submit your aWrranty Registration Card, you will receive
coupons for discounts on clean and lubes (from half off to free!) Also included
are Priority Shipping Labels guaranteeing a 48-hour turnaround time from
participating Shimano Satellite Service Centers.
®
www.shimano.com
Low Profile Baitcasting Reels
www.shimano.com
51
52
®
Calais A
F E AT U R E D
®
• Lo-Mass™ Drilled Spool System (except on CL200ASV)
reduces the weight of the spool by drilling, lowering start-up
inertia for more manageable casts.
• A6063 Aluminum Spool (except on CL100A, which is A7075)
this aluminum alloy provides extra corrosion resistance versus
standard aluminum.
• Super Free (SF™) bearing supported pinion gear system
eliminates friction between the pinion gear and spool shaft for
increased freespool.
• Greaseless Spool Support Bearings By using lightweight oil
H I G H L I G H T S
backing off at light settings while providing the angler a reference
point to how much drag they add or reduce by turning the star.
• Clicking Cast Control Adjustment allows for more confident
adjustability of the friction-based cast control.
• Oversized Clicking Cast Control Knob The large size is easy to
use, while the clicking adjustment allows for precision settings.
• Recessed Reel Foot allows the reel to sit closer to the rod for
comfort and maneuverability.
• Quarter Turn Easy Access Sideplate (available only on CL100A)
An improvement over the already easy-to-use Turn-Key access,
the fisherman flips up the Turn-Key on the sideplate, then rotates
it 1/4 turn to open the sideplate for quick VBS adjustments.
rather than grease, friction is reduced even further for more
casting distance and efficiency.
• Turn Key Access Sideplate flip up the easy-to-use turn-key and
• Spare Brake Weight Block Holds up to 2 extra brake weights
®
• Septon * This handle grip material is soft to the touch and does
for more adjustability. (available on CL100A only)
• High Efficiency Gearing (HEG™) (available only on CL100A)
is not only the oversized gears, but also includes the
setplate and sideplate, which allow for a high speed retrieve
while providing unbelievable fish-moving torque.
®
®
settings and the smoothest Shimano drag performance ever.
®
• Variable Brake System (VBS ) uses centrifugal force rather
than magnets to aid in controlling the cast for increased
distance and adjustability.
• Reduced Mass VBS hub (CL100A only) reduces the weight of
the spool increasing freespool and reducing start up inertia.
• Cold Forged Handle Shank is much stronger than a pressed or
cast handle for non-flexing durability.
• Platinum Service Plan by submitting your warranty card, you
receive coupons for discounted “clean and lubes” and priority
48 hour turnaround times from our Satellite Service Centers!
• Aluminum Frame
• Aluminum Sideplates
• Titanium Levelwind Insert (CL100A is tapered).
CL100A
rotate it to remove the sideplate to adjust the VBS brake weights.
CL200APV
CL200A
CL201A
CL200ASV
®
Calais A
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
CL100A
Right
24
10/110, 12/90, 14/75
9.3
10
1
5.8:1
8.7
$389.99
CL200APV
Right
17
10/130, 12/120, 14/100
11.0
10
1
5.0:1
9.0
$389.99
CL200A
Right
26
10/130, 12/120, 14/100
10.0
10
1
6.2:1
8.8
$389.99
Left
26
10/130, 12/120, 14/100
10.0
10
1
6.2:1
8.8
$389.99
Right
26
10/210, 14/120
10.0
10
1
6.2:1
9.3
$389.99
Model
CL201A
CL200ASV
®
www.shimano.com
53
®
Chronarch
Chronarch A, Circa 1993
Chronarch B, present day
54
Improving A Timeless Classic
he Chronarch® A has been a staple
T
to walleye, that require fast line pickup with a minimum amount
of line capacity.
New technologies, advancements in design, and exciting new
materials have entered the market over the last decade. There
has also been the evolution of new fishing techniques, along
with the fact that reels originally designed for bass fishing have
become favorites of saltwater flats fishermen.
The BSV is the Saltwater Version that has a deep spool for line
capacity, high speed retrieve and oversized SV Power Grips for
fighting saltwater fish. With its extra line capacity and oversized
grips, the SV brings flats fishermen a baitcaster that was
designed for them.
At the beginning stages of renewing the Chronarch, it became
obvious that it would not do to simply throw in all of the new
features and technology that have come to the fishing industry
during the Chronarch’s lifetime. The challenge was to keep the
essence of the Chronarch A design, listen to Chronarch owners
about what they would like to see improved, and look at the
ever-widening applications with which the Chronarch A is used,
without changing its proven reputation.
There are also some exciting new features as well. For example,
take a look at the new Escape Hatch™ sideplate access system.
The sideplate is opened by flipping a switch that is easy to use
yet out of the way to prevent accidental opening. This not only
allows for quick VBS® adjustments, but also allows the sideplate
to be smooth and contoured to fit in your hand.
of fishermen since 1993 and its design
has become a timeless classic. From the
comfortable profile, to the large open window for
line control, to the unique appearance, the
Chronarch A is still one of today’s top performers
with its own personality.
The BPV is the new Power Version that is equipped with a
5.0:1 gear ratio, Lo-Mass spool, and new, larger, PV Power
Grips. With the PV Power Grips, 5.0:1 gear ratio and High
Efficiency Gearing, the PV is optimal for crankin’, slow-rolling
big spinnerbaits, or casting large swimbaits all day long.
The first thing Chronarch users asked for was an extremely
durable finish. For this reason, Chronarch B is now using an Ion
Plated finish. This type of finish has proven to be extremely
durable on reels like the Stella®. Also, to reduce the chance of
scratches from bouncing around in a rod locker, the Chronarch B
has two small metal plates on the top of each side of the frame.
Researching what Chronarch users fished for and how they
fished showed many applications and species. As a result, there
are three new versions of the Chronarch: CH-B, CH-BPV
and CH-BSV.
The standard B version is a high speed 6.2:1 reel, using our
Lo-Mass™ drilled spool system and traditional paddle-style grip.
This reel was designed for most fishing applications from bass
Of course there are also many of the exciting features that were
introduced during Chronarch A’s illustrious lifetime: Super Free
Bearing Supported Pinion Gear System (SF™), High Efficiency
Gearing (HEG™), Anti-Rust Bearings (A-RB®), and Super
Stopper® with Assist Stopper.
This new series was one of the most field-tested reels in
Shimano history. Over 300 bass were caught in the first three
days on the original prototypes at Lake Aguamilpa in Mexico.
These prototypes also have been fished on the flats of the east
and west coasts of Florida where they caught redfish, trout,
snook and jacks. After that they tamed the famous Toledo
Bend. After the first round of prototypes, field testing continued
at lakes and saltwater flats around the country.
We would like to introduce to you the next decade of high end
baitcasting…The New Chronarch B Series.
www.shimano.com
55
56
®
Chronarch
F E AT U R E D
H I G H L I G H T S
®
• A-RB (Anti-Rust Bearings) are specially treated stainless
steel ball bearings that are at least 10 times more corrosion
resistant than standard stainless steel ball bearings.
• Lo-Mass™ Drilled Spool System reducing the weight of the
turning the star.
spool by drilling, lowering start-up inertia for more manageable
casts. (available on CH100BPV, CH101BPV, CH100B and
CH101B models only)
• PV Power Paddles These oversized paddle grips provide extra
power and remain comfortable after a full day of deep cranking
(BPV models only).
gears, but also includes the setplate and sideplate, which allow
for a high speed retrieve while providing unbelievable
fish-moving torque.
• SV Power Paddles The largest of the paddle grips provides extra
fish fighting power when battling feisty inshore species (BSV
models only).
®
• Ion Plated Finish This finish is extremely durable and is more
• A7075 Aluminum Spool (on models 100B, 101B, 100BV,
scratch- and corrosion-resistant than paint.
101BPV) A7075 Aluminum is extremely strong, so we can use
less material for lighter weight, which helps to achieve more
manageable freespool.
• Escape Hatch™ Easy to use trigger allows quick access to the
• A6063 Aluminum Spool (on CH100BSV and CH101BSV only)
VBS weights and keeps the sideplate smooth for comfort when
palming the reel.
this aluminum alloy provides extra corrosion resistance versus
standard aluminum.
®
®
• Assist Stopper is a back-up anti-reverse system that reduces
• Cold Forged Handle Shank is much stronger than pressed or cast
the stress placed on the one-way roller bearing to increase
durability.
handle for non-flexing durability.
• Reduced Mass VBS hub reduces the weight of the spool
®
increasing freespool and reducing start up inertia.
• Aluminum Frame
CH100BPV
CH100BSV
CH100B
CH101BPV
CH101BSV
CH101B
®
Chonarch B
Model
CH100BPV
CH101BPV
CH100B
CH101B
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
Right
21
10/130, 12/120, 14/100
12.0
6
1
5.1:1
9.1
$269.99
Left
21
10/130, 12/120, 14/100
12.0
6
1
5.1:1
9.1
$269.99
Right
26
10/130, 12/120, 14/100
12.0
6
1
6.2:1
9.0
$269.99
Left
26
10/130, 12/120, 14/100
12.0
6
1
6.2:1
9.0
$269.99
CH100BSV
Right
26
10/150, 12/130, 14/110
10.0
6
1
6.2:1
9.5
$269.99
CH101BSV
Left
26
10/150, 12/130, 14/110
10.0
6
1
6.2:1
9.5
$269.99
®
www.shimano.com
57
Mg
58
®
Chronarch Mg
Mg
F E AT U R E D
®
• Magnesium Frame our magnesium frames are safe for use in
H I G H L I G H T S
turning the star.
saltwater and provide an extremely lightweight reel.
• Lo-Mass™ Drilled Spool System reducing the weight of the spool
by drilling, lowers start-up inertia for more manageable casts.
• Drilled Handle Shank reduces the weight of the reel.
• Turn-Key Access Sideplate flip up the easy to use turn-key and
®
• A7075 Aluminum Spool is extremely strong, requiring less
®
material for lighter weight, which helps to achieve more
®
CH50MG
CH51MG
®
Chronarch Mg
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
CH50Mg
Right
25
10/105, 12/85, 14/70
10.0
4
1
6.2:1
5.9
$249.99
CH51Mg
Left
25
10/105, 12/85, 14/70
10.0
4
1
6.2:1
5.9
$249.99
Model
O U R M A G N E S I U M R E E L S A R E S A F E F O R U S E I N S A LT WAT E R !
Magnesium is an extremely lightweight metal that reduces the overall
weight of the reel. Without a special protectant, magnesium is normally
highly susceptible to corrosion in saltwater.
The magnesium parts in our reels are specially treated to protect them
from premature corrosion or damage from saltwater use.
While our magnesium reels are safe to use in saltwater, care should be
taken when oiling the reel or filling the spool with line, etc., as scratches
through the protective surface coating caused by line cutters or other
tools can lead to premature rust and corrosion.
So, go ahead, fish the flats, fish the backwaters and rest assured, we’ve
protected your investment!
www.shimano.com
59
60
®
Curado D
The Story of the Curado® D
The most popular reel in the market gets even better.
Originally introduced to the fishing public in 1991, the
Shimano® Curado® series has become one of the most
popular low profile reels ever. Curado has changed
colors throughout the years but the built-in quality and
reliability is known among fishermen throughout the
sport. Whether it’s the tournament angler fishing with
thousands of dollars on the line, or the weekend
angler fishing his favorite waters, the Curado has been
there every step of the way.
This reel was designed with fishermen’s needs in mind
and has been an integral part of their arsenals for years.
Designed for ease of use and maximum performance for
a variety of fishing situations, the Curado series was
adopted by freshwater bass fishermen as the staple reel
for all techniques. oNmatter if it’s flipping craws, fishing
jigs, Carolina rigging, fishing topwater or crank baits, these
reels have helped anglers put more fish in the boat and
win more tournaments.
The Curado has also spent an ample amount of time
chasing inshore gamefish such as redfish, speckle trout,
snook, and a variety of others throughout oNrth America
with great success. Built to withstand extreme, harsh
elements, the Curado offers anglers a reel designed for
performance, one that instills confidence for both salt
and freshwater species, no matter what the job at hand.
1
2
3
[1] Curado® D takes High Efficiency Gearing (HEG™) to
the next level. By using extremely large gears, the Curado
DHSV (High Speed Version) delivers a blistering fast 7.0:1
gear ratio that not only provides unbelievable line pickup,
but also has the power to turn a stubborn fish’s head away
from structure. The DPV (Power Version) features a slower
5.0:1 gear ratio ideal for crankin’ large crankbaits or slow
rollin’ oversized spinnerbaits all day long without fatigue.
[2] The Magnumlite® spool is an extremely lightweight
spool design. By using innovative drilling and support
construction, the walls of the spool can be extremely
thin without sacrificing strength. This results in the
lowest startup inertia ever in a Shimano® reel. The
Magnumlite spool also requires less braking force
for manageability during casts, so less distance is wasted.
What this means is that the angler can cast lightweight
baits farther and more accurately than ever before.
[3] Curado® D reels utilize a one-way roller bearing called
Super Stopper®. This provides a solid anti-reverse without
backplay. The result are quick, powerful hooksets.
Curado also features Assist Stopper. This is a back up
ratchet-style anti-reverse system. Should the bearing
begin to slip due to overlubrication or extreme weather
conditions, the ratchet takes over and prevents the
bearing from becoming damaged. This “tag team”
style anti-reverse system provides not only the highest
performance but also the greatest reliability and durability.
www.shimano.com
61
62
®
Curado D
F E AT U R E D
H I G H L I G H T S
• Magnumlite® Spool This spool provides extremely low startup
inertia for increased line control and casting performance even
when using lightweight baits or lures.
rotate it to remove the sideplate to adjust the VBS brake weights
(CU
100D and CU
101D only).
• Septon®* this handle grip material is soft to the touch and does
for a high speed retrieve while providing unbelievable fishmoving torque (not available on 100D or 101D).
power and remain comfortable after a full day of deep cranking.
• Dartainium® Drag material provides a wide range of drag
• Variable Brake System (VBS®) uses centrifugal force rather
than magnets to aid in controlling the cast for increased distance
and adjustability.
• Super Stopper
•
• Assist Stopper is a back-up anti-reverse system that reduces the
®
is a one-way roller bearing that eliminates
Recessed Reel Foot allows the reel to sit closer to the rod for
turning the star.
stress placed on the one-way roller bearing to increase durability.
• 1/4 Turn Easy Access Sideplate this flip up turn-key design
requires only 1/4 of a turn to remove the sideplate for VBS brake
weight adjustments (not available on CU
100D or CU
101D).
• Aluminum Frame for tight tolerances and unflexing durability.
• Aluminum Handle Side Sideplate (not available on CU100D
or CU
101D)
CU100D
CU101D
CU200DHSV
CU200DPV
CU201DHSV
CU201DPV
®
Curado D
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
Model
Retrieve
CU
100D
Right
25
10/105, 12/85, 14/70
10.0
4
1
6.2:1
7.4
$199.99
CU
101D
Left
25
10/105, 12/85, 14/70
10.0
4
1
6.2:1
7.4
$199.99
Right
30
8/180, 10/155, 14/110
12.0
5
7.0:1
9.8
$199.99
CU
200DHSV
CU
201DHSV
SPRING ’06
CU
200DPV
CU
201DPV
Left
Right
SPRING ’06
Left
30
21
21
8/180, 10/155, 14/110
8/180, 10/155, 14/110
8/180, 10/155, 14/110
12.0
12.0
12.0
1
5
5
1
7.0:1
1
5
5.0:1
1
5.0:1
9.8
9.8
9.8
MSRP
$199.99
$199.99
$199.99
®
www.shimano.com
63
®
64
®
Castaic
F E AT U R E D
®
• Lo-Mass™ Drilled Spool System Reducing the weight of the
spool by drilling lowers start-up inertia for more manageable casts.
®
• Instagage II clutch for flipping and pitching allows the angler
to put the reel in gear without having to turn the handle and
provides excellent access to the spool for line control.
H I G H L I G H T S
®
turning the star.
• Aluminum Frame
• Aluminum Spool
CA200SF
CA201SF
®
Castaic SF
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
Model
Retrieve
CA200SF
Right
26
8/180, 10/155, 14/110
9.2
4
1
6.2:1
8.6
$169.99
CA201SF
Left
26
8/180, 10/155, 14/110
9.2
4
1
6.2:1
8.6
$169.99
www.shimano.com
MSRP
65
66
®
Citica D
The Story of the Citica® D
A proven performer with years of experience.
®
®
The Shimano Citica low profile baitcasting reel has seen it’s
fair share of fishing action throughout the years. This reel has
helped more diehard fishermen enjoy weekends catching their
favorite game fish, while providing them the assurance of
getting those fish to the boat. The Citica has been around the
fishing community since the early 90s, offering anglers the
confidence they have grown to expect from a Shimano reel.
Shimano spends years designing and testing its reels so that
anglers have the very best partner to help them land fish year
after year. The Citica was designed to meet the needs of
anglers no matter what type of fishing they enjoy. Shimano
has spent years listening to fishermen and the problems they
experience on the water, trying to help alleviate them with new
and innovative features. The Citica incorporates many of the
features anglers have looked for.
The Citica offers anglers an aluminum frame that gives it
the backbone to keep its internal workings smooth and in
alignment while fighting the toughest opponents. It also
comes with Shimano’s Variable Brake System (VBS®)
for maximum casting efficiency in all conditions, giving you
the ability to get your bait in the fish’s face. The Turn-Key
Access Sideplate lets you adjust the VBS with a twist of the
wrist in a matter of seconds, so you can adjust to the
changing conditions while on the water. The clicking drag
adjustment gives anglers peace of mind knowing that their
drags will stay set without backing off in the middle of a fight.
1
2
3
The Citica has earned its reputation as a reel that offers
anglers what they need to get the job done, because
without the right equipment, a good day of fishing is hard
to come by. Citica will help make your days on the water
fond memories.
[1] The Lo-Mass™ Drilled Spool System is designed for anglers
who require longer casts and can sacrifice line capacity to
do so. The Lo-Mass spool features a large arbor that is
cross-drilled to reduce its weight. By moving the arbor of the
spool outward, the mass of the spool is closer to the rim of the
spool. Like a lightweight bicycle wheel, where most of the mass
lies in the tire, the majority of a Lo-Mass spool lies in the arbor
and the line it is spooled with.
[2] The Drilled Handle Shank reduces the weight of the reel by
drilling out unnecessary metal. This is done without sacrificing
strength or the structural integrity of the handle shank.
[3] Super Stopper® with Assist Stopper backup anti-reverse
system provides instant hooksetting power with extra
reliability. This is accomplished by using the Super Stopper
one-way roller bearing to eliminate backplay and the Assist
Stopper backup ratchet and pawl system that “kicks in” if the
bearing starts to slip. This prevents any damage to the roller
bearing and any loss of anti-reverse to the angler.
www.shimano.com
67
68
®
Citica D
F E AT U R E D
• Lo-Mass™ Drilled Spool System reduces the weight of the
spool by drilling, and lowers start-up inertia for more
manageable casts.
H I G H L I G H T S
(200DPV only).
gears, but also includes the setplate, which allow for a high
®
• Super Stopper
is a one-way roller bearing that eliminates
•
Aluminum Frame for tight tolerances and unflexing durability.
backing off at light settings while providing the angler a reference
point to how much drag they add or reduce by turning the star.
• Reduced Mass VBS hub reduces the weight of the spool,
CI200D
CI201D
CI200DPV
®
Citica D
Model
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
CI200D
Right
26
8/180, 10/155, 14/110
10.0
4
1
6.2:1
9.9
$119.99
Left
26
8/180, 10/155, 14/110
10.0
4
1
6.2:1
9.9
$119.99
Right
21
8/180, 10/155, 14/110
10.0
4
1
5.0:1
9.9
$119.99
CI201D SPRING ’06
CI200DPV
®
www.shimano.com
69
70
™
Cruxis
F E AT U R E D
• Lo-Mass™ Drilled Spool System reduces the weight of the spool
H I G H L I G H T S
by drilling, and lowers start-up inertia for more manageable casts.
gears, but also includes the setplate, which allow for a high
®
•
Drilled Handle Shank reduces the weight of the reel.
®
• Aluminum Frame for tight tolerances and unflexing durability.
®
turning the star.
CRX200
CRX201
Cruxis™
Model
Retrieve
CRX
200
Right
CRX
201
SPRING ’06
Left
Line Retrieve
Per Crank (in)
26
26
Line Capacity
(# Test/yd)
8/180, 10/155, 14/110
8/180, 10/155, 14/110
Max
Drag (lb)
Ball
Bearings
10.0
10.0
www.shimano.com
3
Roller
Bearings
1
3
Gear
Ratio
6.2:1
1
6.2:1
Weight
(oz)
9.5
9.5
MSRP
$99.99
$99.99
71
®
Coriolis
F E AT U R E D
H I G H L I G H T S
• Graphite Frame
• Aluminum Spool
• Rubber Handle Grip is comfortable and soft to
the touch.
• Easy Mag® magnetic cast control, unlike traditional
magnetic systems, can actually allow for a true
freespool setting.
• Super Stopper® is a one-way roller bearing that
eliminates backplay for solid hooksets.
• Assist Stopper is a back-up anti-reverse system
that reduces the stress placed on the one-way
roller bearing to increase durability.
CO100E
®
Coriolis E
Model
CSO100E
72
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
Right
26
8/185, 10/170, 12/150, 14/110
8.0
3
1
6.2:1
7.9
$59.99
www.shimano.com
Crestfire , Callisto
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
• Aluminum Spool
• Plastic Handle Grip
freespool setting.
®
®
Crestfire D
Model
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
Right
26
8/185, 10/170, 12/150, 14/110
8.0
2
1
6.2:1
7.9
$49.99
CR100D
F E AT U R E D
H I G H L I G H T S
• Graphite Frame
• Aluminum Spool
• Plastic Handle Grip
freespool setting.
®
Callisto
Model
CSO100
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
Right
26
8/185, 10/170, 12/150, 14/110
8.0
1
1
6.2:1
7.9
$39.99
www.shimano.com
73
Round Baitcasting F
eatures
A-RB® (Anti-Rust Bearings) A-RB bearings are stainless
steel ball bearings that have been through the A-RB
treatment process which makes them at least 10 times more corrosion
resistant than standard stainless steel ball bearings (please see page 102 for
more information).
High Efficiency Gearing (HEG™) HEG consists of not only the
gears, but also the frame, setplate, and handle-side sideplate.
iFrst we increased the size of the drive gear and the pinion gear to offer
increased leverage and power. By using a one-piece frame that
incorporates the setplate and adding a one-piece stamped sideplate, we
have eliminated flex in the drivetrain that causes normal gears to bind under
pressure. By eliminating the flex and increasing the leverage, we are able to
provide high-speed retrieves and deliver an incredible amount of torque,
while maintaining the smooth, silent retrieve Shimano® reels are famous for.
Digital Control™ See page 76.
Assist Stopper This is a back up system to the Super Stopper that consists
of the traditional pawl and ratchet. Should the Super Stopper roller bearing
slip due to cold weather or over-lubrication, the Assist Stopper kicks in to
provide a solid hookset the instant the roller bearing begins to slip. Most of
the time the angler will not know when this feature engages, because by
quickly stopping the backwards rotation of the roller bearing, the Assist
Stopper greatly reduces the chance of permanent damage to the Super
Stopper, allowing it to continue to function as designed.
Septon®* This handle grip material is soft to the touch and does not get
slippery when wet.
3-Position Power Grip This unique handle grip was designed with 2 goals
in mind: comfort and function. The ergonomic contours of this handle not
only allow the angler to grip the handle like a typical barrel for maximum
torque, but also enable the user the utilize a two or three finger grip similar
to one on a paddle grip to easily work topwater plugs or rapidly gain line.
PV Power Paddles These oversized paddle grips provide extra power and
remain comfortable after a full day of deep cranking.
Super Free (SF™) The Super rFee bearing-supported pinion gear system (SF
) was designed to eliminate friction on the spool shaft during the
cast. In standard baitcasting reels, when the clutch bar is pressed down,
the pinion gear is freed and can actually drag on the spool shaft, creating
friction and limiting the length of the cast. With SF
, the pinion gear is supported
by a ball bearing, and when the clutch is disengaged the pinion gear and spool
shaft are kept in precise alignment. The result is zero friction on the spool shaft
for increased freespool.
Lo-Mass™ Drilled Spool System Lo-Mass Drilled Spool System is
designed for anglers who require longer casts and can sacrifice line
capacity to do so. The Lo-Mass spool features a large arbor that is crossdrilled to reduce its weight. By moving the arbor of the spool outward, the
mass of the spool is closer to the rim of the spool. Like a lightweight bicycle
wheel, where most of the mass lies in the tire, the majority of a Lo-Mass
spool lies in the arbor and the line it is spooled with.
A7075 Aluminum Spool These Lo-Mass spools are made of lightweight A7075
aluminum. Combining this material with an aggressive porting pattern results in
an extremely light weight spool. This allows for low startup inertia for casting
lightweight baits and an overall increase in useable freespool.
Variable Brake System (VBS®) VBS uses centrifugal force rather than
magnets to aid in controlling the cast. The individual brake weights,
when turned on, are forced outward at the beginning of the cast when
backlashes most often occur, causing friction that reduces the speed of
the spool. Once the spool speed begins to slow, the pressure lessens, allowing the spool to continue spinning. The result is a much more consistent
spool speed that is easier to manage and takes advantage of the reel’s maximum casting distance. Settings range from zero weights turned on for true
freespool and up to 6 weights turned on for extremely windy conditions and
maximum cast control.
®
Handle Side VBS Reels equipped with this feature allow the angler to
remove the handle side sideplate and adjust the VBS weights without removing
the spool from the reel. This allows the angler to easily adjust the amount of
cast control while the line is threaded through the rod.
Easy Access Sideplate On reels with this feature, to access the VBS
system, a set screw on the handle side of the reel is loosed and the opposite
sideplate rotates open. rFom here the VBS weights can be adjusted without
having to remove the spool or any other parts of the reel, for easy, worry-free
adjustment on the water.
Quick Take Down By loosening the thumb screws on the handle-side
sideplate, the sideplate can easily be removed from the reel. This aids in
quick maintenance, and allow adjustment on the VBS brake weights in
the reel.
Large Diameter Super Duralumin Drive Gear The larger diameter increases
the amount of leverage an torque that can be applied to the fish. Super
Duralumin is extremely hard and therefore is more durable than standard
drive gears.
Dartainium® Drag This drag material provides a wider range of drag
settings, along with the smoothest Shimano® drag performance ever.
Super Stopper ® Super Stopper uses a one-way, stainless
steel roller bearing that eliminates backplay. This provides the
angler with instant hooksetting power.
SV Power Paddles These are the largest of the paddle grips and provide
extra fish fighting power when battling feisty inshore species.
Cold Forged Handle Shank Reels with this feature use a handle shank that
is cold forged. Cold forging allows more metal to be used in a much more
dense construction. This means the handle can be made in a smaller
profile with more strength and also allows for deeper anodization for
protection from the elements.
Adjustable Handle Shank oFr deep water situations or for anglers needing
more leverage, the handle shank can be extended to increase the amount
of power that can be applied to the retrieve.
Clicking Drag Adjustment The micro-click mechanism in the drag serves
two purposes. The first is that it prevents the drag from backing off when
set at light settings. The second purpose is to allow the angler a point of
reference when adjusting the drag.
Clicking Cast Control Adjustment The micro-click mechanism in the Cast
Control serves two purposes. The first is that it prevents the cast control
from backing off when set at light settings. The second purpose is to allow
the angler a point of reference when adjusting the cast control setting.
Non-Disengaging Levelwind System On wide spool reels with a nondisengaging levelwind system, the levelwind remains engaged during the
cast allowing the levelwind to track back and forth with the line as it flows off
of the spool. This eliminates the drastic line angles caused by a disengaging
levelwind system that can cause extreme friction which can lead to short
casts or frustrating backlashes. By doing this we have increased the
efficiency of the cast, allowing for more distance with less effort.
Recessed Reel Foot By recessing the reel foot further into the frame, the
reel sits lower in the reel seat. This allows for a much more palmable feel
when the reel is mounted on a rod than traditional frame designs. oNt only
does it increase the comfort level, but because of the lower profile in the
reel seat, it makes the reel much more maneuverable with casting styles
such as underhand and roll casts.
Drilled Crossbar By drilling the top crossbar of the reel, we have enhanced
the appearance of the reel while decreasing the overall weight. The result is
a beautiful looking reel that does not weigh you down.
CTE Clicker This clicker is strategically located for easy use, yet at the
same time, out of the way so that it cannot be accidentally turned on or off.
Clicker When engaged, the clicker increases the tension in freespool and
activates a clicking alarm to alert you as to when a fish bites.
Metal Series The metal construction showcased in some of
our finest reels now appears throughout our line of Metal
Series products. Metal frames not only keep moving parts in precise
alignment, they also feature the use of the latest anodizing, plating and
painting techniques for beautiful and durable finishes.
Platinum Service Plan With the Platinum Service Plan,
when you submit your Warranty Registration Card, you will
receive coupons for discounts on “clean and lubes” (from half off to free!)
Also included are Priority Shipping Labels guaranteeing a 48-hour
turnaround time from participating Shimano Satellite Service Centers.
74
www.shimano.com
Round Baitcasting Reels
75
®
Digital Control
®
Digital Control
®
The Calcutta TE DC
• Revolutionary Digital Control Braking System
• Capable of exceeding 30,000 RPM
• Achieved casting distances of over 290 feet in testing
How It Works
During the initial moments of a cast, the energy
generated by the rotation of the spool is stored in
the Digital Control circuit board and used to power
the Digital Braking system for subsequent casts. The
Waterproof Digital Control system of a Calcutta TE DC
is a self-energizing system, recharging with
each cast. There is no battery or other power
source needed.
By simply turning the external eight-position dial
to the selected setting, the Calcutta TE DC allows
access to up to eight different pre-programmed
braking patterns based on lure type, wind conditions,
or casting method. Based on a 6-second duration
cast, the Digital technology behind the Digital Control
Braking System allows the electromagnetic brake to
be applied in intervals of up to 1/1000 of a second.
About Cast Control Systems
Traditionally, centrifugal and magnetic braking systems
have been employed on baitcasting reels to control the
speed of the spool’s rotation and the energy from casting
for better accuracy and to minimize backlashes.
Magnetic cast control systems are typically easily
adjusted externally. However, most magnetic systems
can not allow for a “true” freespool setting as magnets
can not be “shut off.” Also, because magnets are
always on, they slow the spool speed exponentially
because the same braking force is applied during fast
spool speeds at the beginning of the cast and during
the slow speeds at the end of a cast.
Centrifugal brake weight systems are more advanced
than magnets. This is because the weights apply
different forces throughout the cast. What this means
is that the angler will experience a more consistent
spool speed and that results in a more manageable
cast. Brake weights also allow for longer casts in most
instances because the brake weights reduce the
amount of force they apply as the spool begins to slow.
This allows the spool to spin longer. However, most
brake weight systems need to be adjusted internally.
This means the angler needs to partially disassemble
the reel to make adjustments to the cast control in
most cases.
®
Shimano has taken the next step in cast control
technology. Introducing the revolutionary new Calcutta
TE DC (Total Efficiency, Digital Control™). This is the
first, self-energizing Digital Braking “smart” baitcasting
reel. It features 8 different pre-programmed braking
patterns based on lure and casting type.
76
Typically, it takes approximately 0.07 seconds to reach
maximum spool rotation from the point of release. Reels
which employ conventional (Centrifugal or Magnetic)
braking systems to prevent backlash, operate efficiently
between 15,000 and 20,000 RPM. With the Digital
Braking technology employed by the Calcutta TE DC,
it is possible to allow spool rotation to exceed 30,000
RPM (a 50-70% increase of traditional systems) and still
maintain excellent line control for longer, more accurate
casts. This is because of the pre-programmed braking
patterns allow the spool to achieve maximum RPMs
before engaging the brake, whereas conventional reels
begin braking immediately and do not allow the spool
to continue accelerating throughout the casting motion.
As the brakes are activated, the Digital Brake system
emits electronic beep sounds reinforcing the sense of
Digital Control.
With this technology, each of the eight pre-programmed
braking patterns provide awesome control of the feeding
of the line by applying the ideal amount of braking force
at critical intervals. As a result, it is possible to achieve
long, accurate casts with consistent backlash control.
The application of the “smart” braking by the Digital
Braking system quickly stabilizes the spool rotation.
Digital Control varies the amount of braking force
applied, minimizing the dreaded backlash.
What This Means on the Water
The increased RPM’s provided by the CTE-DC
allow for longer casts. At the same time, the
pre-programmed braking patterns allow for not only
easy external adjustment for any situation, but also
an extremely manageable cast with less backlashes.
Less effort is needed to cast the bait further, this
combined with High Efficiency Gearing, put less
stress on the angler throughout long fishing days.
Overall, the Digital Control Braking System means
further casts, less effort, less backlashes and easy,
quick adjustment.
www.shimano.com
77
®
Calcutta TE DC
F E AT U R E D
®
• Lo-Mass™ Drilled Spool System reduces the weight of the spool
by drilling, and lowers start-up inertia for more manageable casts.
• A7075 Aluminum Spool is extremely strong, so we can use
less material for lighter weight, which helps to achieve more
• Digital Control™ the first self-energizing system updates the
amount of cast control up to 1,000 times per second for
the ultimate casting distance and manageability.
fish-moving torque.
• Large Diameter Super Duralumin Drive Gear increases the
• Clicking Cast Control Adjustment allows for more confident
adjustability of the friction-based cast control.
• Drilled Crossbar reduces the overall weight of the reel.
®
not get slippery when wet (250 size only).
• Cold Forged Handle Shank is much stronger than pressed or
cast handle for non-flexing durability.
• Adjustable Handle Shank allows the angler to use the handle in
the short position for fast retrieves, or the extended position for
more cranking power.
48-hour turnaround times from our Satellite Service Centers!
• Rubber Handle Grip is comfortable and soft to the touch (not
available on 250 size).
durability of the drivetrain.
®
• Paddle-style grip (except 250, which has PV Power Handles).
•
H I G H L I G H T S
(250 size only).
®
Dartainium Drag material provides a wide range of drag
• Stamped Aluminum Handle Side Sideplate
• Titanium levelwind insert
turning the star.
®
Calcutta TE DC
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
CTE100DC
Right
23
8/115, 10/95, 12/80
8.5
10
1
5.8:1
8.6
$499.99
CTE200DC
Right
23
10/135, 12/115, 14/95
9.9
10
1
5.0:1
9.9
$499.99
CTE201DC
Left
23
10/135, 12/115, 14/95
11.4
10
1
5.0:1
9.9
$499.99
CTE250DC
Right
23
10/165, 12/140, 14/115
10.1
10
1
5.0:1
10.2
$499.99
Model
78
www.shimano.com
CTE 201DC
CTE 100DC
CTE 200DC
CTE 250DC
www.shimano.com
79
80
®
Calcutta TE
F E AT U R E D
®
• A-RB (Anti-Rust Bearings) (all models execpt 50GT, 51GT,
100GT, 101GT) are specially treated stainless steel ball bearings
that are at least 10 times more corrosion resistant than
H I G H L I G H T S
• Recessed Reel Foot (excluding model 700) allows the reel to sit
closer to the rod for comfort and maneuverability.
• Easy Access Sideplate by using a single thumb screw, the
angler can open the sideplate and adjust the VBS without
• Lo-Mass™ Drilled Spool System (only models 50GT, 51GT,
100GT, 101GT, and 200GT) reduces the weight of the spool by
drilling, and lowers start-up inertia for more manageable casts.
having to remove the spool from the reel.
• Manual Return Cluch (CTE700 only)
• Drilled Crossbar (only on models 50GT, 51GT, 100GT, 101GT,
• Aluminum Spool
200GT) reduces the overall weight of the reel.
• Super Free (SF™) (excluding models 300, 400, 401, 700)
bearing supported pinion gear system eliminates friction
between the pinion gear and spool shaft for increased freespool.
®
• Adjustable Handle Shank (700 size only) allows the angler to
use the handle in the short position for fast retrieves, or the
extended position for more cranking power.
• CTE Clicker (only on models 300, 400, 401, 700) this clicker
button is recessed into the sideplate for comfort, yet still
extremely easy to use.
fish-moving torque.
®
48-hour turnaround times from our Satellite Service Centers!
®
• Septon * Handle Grip (on models 300, 400, 401, 700) this
®
®
• Non-Disengaging Levelwind System (only on models 300, 400,
handle grip material is soft to the touch and does not get
slippery when wet.
• Rubber Handle Grips (on models 50GT, 51GT, 100GT, 101GT,
200GT, 200) is comfortable and soft to the touch.
401, 700) allows the levelwind to track back and forth during
• Stamped Aluminum Handle Side Sideplate
the cast which reduces drastic line angles that cause unwanted
• Titanium levelwind insert
friction and backlashes on wide-spool reels.
• Rod clamp available on 700 model
®
CTE51GT
CTE50GT
www.shimano.com
81
®
Calcutta TE
CTE51GT
CTE50GT
CTE101GT
CTE100GT
CTE200
CTE200GT
CTE201
CTE300
82
www.shimano.com
CTE401
CTE400
CTE700
®
Calcutta TE
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
CTE50GT
Right
23
6/140, 8/95, 10/80
8.0
11
1
6.2:1
8.5
$329.99
CTE51GT
Left
23
6/140, 8/95, 10/80
8.0
11
1
6.2:1
8.5
$329.99
CTE100GT
Right
23
10/135, 12/115, 14/95
9.5
10
1
5.8:1
9.5
$329.99
Model
CTE101GT
Left
23
10/135, 12/115, 14/95
9.5
10
1
5.8:1
9.5
$329.99
CTE200GT
Right
23
8/210, 10/190, 14/110
11.4
10
1
5.0:1
10.2
$329.99
CTE200
Right
23
8/230, 10/210, 14/120
11.4
6
1
5.0:1
10.4
$299.99
CTE201
Left
23
8/230, 10/210, 14/120
11.4
6
1
5.0:1
10.4
$299.99
CTE300
Right
25
12/240, 14/190, 20/120
16.0
4
1
5.0:1
12.5
$339.99
CTE400
Right
25
14/260, 20/160
16.0
4
1
5.0:1
12.8
$349.99
CTE401
Left
25
14/260, 20/160
16.0
4
1
5.0:1
12.8
$349.99
CTE700
Right
31
16/420, 20/300, 25/250
17.0
6
1
4.7:1
19.0
$389.99
www.shimano.com
83
84
®
Calcutta B
F E AT U R E D
• Cold Forged Aluminum Frame, Sideplates and Spool provide
H I G H L I G H T S
• Lo-Mass™ Drilled Spool System reduces the weight of the
the strongest, tightest tolerances for excellent smoothness and
legendary durability.
spool by drilling, and lowers start-up inertia for more manageable casts (CT200GTB only).
• Drilled Crossbar reduces the overall weight of the reel
(CT200GTB only).
• Clicker increases tension on freespool and activates a clicking
alarm when a fish bites (400 & 700 sizes only).
• 3-Position Power Grip this Septon®* coated handle grip allows
for 3 different hand positions fore various fishing techniques
(CT400BSV, CT700B & CT700BSV only).
• Super Stopper® is a one-way roller bearing that eliminates
• SV Power Paddles are the largest of the paddle grips and
• Assist Stopper is a back-up anti-reverse system that reduces
the stress placed on the one-way roller bearing to increase
durability (not available on 50 or 100 sizes).
provide extra fish fighting power when battling feisty inshore
species (CT400B only).
• Non-Levelwind Version the CT400BSV and CT700BSV are
designed without levelwind systems to enhance line control
when fishing in live bait situations.
®
• Quick Take Down by unscrewing the 3 thumb screws the
• Manual Return Clutch Lever the CT700B and CT700BSV are
sideplate can be easily removed for maintenance or to adjust
the VBS brake weights (2 screws on CT50B).
• Septon®* this handle grip material is soft to the touch and does
designed with a manual return clutch lever for better line control
in live bait or drop back situations.
• Non-Disengaging Levelwind System allows the levelwind to
track back and forth during the cast which reduces drastic
line angles that cause unwanted friction and backlashes on
wide-spool reels (CT400B and CT700B only).
• Easy Access Sideplate by using a single thumbscrew, the angler
can open the sideplate and adjust the VBS without having to
remove the spool from the reel (100 and 200 sizes only).
®
Calcutta B
Model
Retrieve
CT50B
Right
16
6/195, 8/130
7.5
3
1
5.0:1
7.9
CT100B
Right
23
8/165, 10/140, 12/120, 14/100
9.5
3
1
5.8:1
CT101B
Left
23
8/165, 10/140, 12/120, 14/100
9.5
3
1
5.8:1
CT200B
Right
27
8/230, 10/210, 14/120
11.0
3
1
CT201B
Left
27
8/230, 10/210, 14/120
11.0
3
1
Right
27
8/210, 10/190, 14/110
11.0
7
1
CT200GTB
Line Capacity
(# Test/yd)
A-RB
A-RB
Max
Ball
Roller
Gear Weight Number
Drag (lb) Bearings Bearings Ratio (oz) of Grips
Line Retrieve
Per Crank (in)
Grip
Style
MSRP
2
Paddle
$189.99
9.0
2
Paddle
$189.99
9.0
2
Paddle
$189.99
6.0:1
10.1
2
Paddle
$189.99
6.0:1
10.1
2
Paddle
$189.99
6.0:1
9.9
2
Paddle
$219.99
CT400B
Right
24
12/330, 14/260, 20/160
17.5
3
1
5.0:1
11.7
2
SV Paddles $219.99
CT400BSV
Right
24
12/330, 14/260, 20/160
17.5
3
1
5.0:1
11.9
1
3-Position $219.99
Power Grip
CT700B
Right
28
20/310, 30/200
16.5
3
1
4.7:1
18.2
1
3-Position $279.99
Power Grip
CT700BSV
Right
28
20/310, 30/200
16.5
3
1
4.7:1
19.2
1
3-Position $279.99
Power Grip
®
www.shimano.com
85
®
Calcutta B
CT100B
CT50B
CT101B
CT200B
CT201B
CT200GTB
CT400B
86
CT400BSV
www.shimano.com
CT700B
CT700BSV
®
®
The Original Calcutta vs. Calcutta B
Original Calcutta Models,
Upgrades/change in MSRP,
New B Version Calcuttas
CT50 vs. CT50B
®
+A-RB
®*
+Septon Handle Grips
®
+Dartainium Drag
+$20 MSRP
CT100 vs. CT100B
+1 BB
®
+A-RB
®*
®
+Dartainium Drag
+1 Sideplate Screw
®
+New Easy Access VBS
+Cold Forged AL Frame
+$30 MSRP
CT150 vs. CT100B
+1 BB
®
+A-RB
®*
®
+Dartainium Drag
+1 Sideplate Screw
®
+$20 MSRP
CT151 vs. CT101B
+1 BB
®
+A-RB
®*
®
+Dartainium Drag
+1 Sideplate Screw
®
+$20 MSRP
CT200A vs. CT200B
+6.0:1 gear ratio
+Assist Stopper
+1 BB
®
+A-RB
®*
®
+Dartainium Drag
+1 Sideplate Screw
®
+Cold Forged AL Frame
+$30 MSRP
CT250 vs. CT200B
+6.0:1 gear ratio
+Assist Stopper
+1 BB
®
+A-RB
®*
®
+Dartainium Drag
+1 Sideplate Screw
®
+$20 MSRP
CT251 vs. CT200B
+6.0:1 gear ratio
+Assist Stopper
+1 BB
®
+A-RB
®*
®
+Dartainium Drag
+1 Sideplate Screw
®
+$20 MSRP
CT250 vs. CT200GTB
+Drilled Top Crossbar
+Lo-Mass™ Drilled Spool
+6.0:1 gear ratio
+Assist Stopper
+5 BB
®
+A-RB
®*
®
+Dartainium Drag
+1 Sideplate Screw
®
+$50 MSRP
CT400 vs. CT400B
+5.0:1 gear ratio
+Assist Stopper
+1 BB
®
+A-RB
®*
+1 Sideplate Screw
+Oversized SV Power Grips
+$20 MSRP
www.shimano.com
CT400S vs. CT400BSV
+5.0:1 gear ratio
+Assist Stopper
+1 BB
®
+A-RB
®*
+Septon Handle Grip
+1 Sideplate Screw
+Three-Position Power Grip
+$20 MSRP
CT700 vs. CT700B
+Assist Stopper
+1 BB
®
+A-RB
®*
+Septon Handle Grip
+Manual Clutch Lever
+$25 MSRP
CT700S vs. CT700BSV
+Assist Stopper
+1 BB
®
+A-RB
®*
+Septon Handle Grip
+Manual Clutch Lever
+$25 MSRP
®
87
88
®
Cardiff A
F E AT U R E D
H I G H L I G H T S
®
®
• Handle Side VBS allows the angler to adjust the VBS brake
weights without removing the spool from the reel.
®
• Recessed Reel Foot (except on models 400 and 401) allows the
reel to sit closer to the rod for comfort and maneuverability.
• Three Post Quick Take Down (except on models CDF100A
which is 2-post) by unscrewing the thumb screws the sideplate
can be easily removed for maintenance or to adjust the VBS
brake weights.
®
• Aluminum Spool
• Non-Disengaging Levelwind System (available only on models
• Clicker (available only on models 400 and 401) increases the
400 and 401) allows the levelwind to track back and forth
during the cast which reduces drastic line angles that cause
unwanted friction and backlashes on wide-spool reels.
tension on freespool and activates a clicking alarm when a
fish bites.
CDF100A
CDF201A
CDF200A
CDF300A
CDF301A
CDF400A
CDF401A
®
Cardiff A
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
A-RB
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
CDF100A
Right
24
8/165, 10/140, 12/120, 14/100
7.5
4
1
5.8:1
8.1
$ 99.99
CDF200A
Right
24
8/230, 10/210, 14/120
10.0
4
1
5.8:1
8.6
$ 99.99
CDF201A
Left
24
8/230, 10/210, 14/120
10.0
4
1
5.8:1
8.6
$ 99.99
CDF300A
Right
24
12/230, 14/180, 17/150
10.0
4
1
5.8:1
8.9
$ 99.99
CDF301A
Left
24
12/230, 14/180, 17/150
10.0
4
1
5.8:1
8.9
$ 99.99
CDF400A
Right
22
12/330, 14/250, 17/220, 20/165
11.0
4
1
5.2:1
11.9
$ 109.99
CDF401A
Left
22
12/330, 14/250, 17/220, 20/165
11.0
4
1
5.2:1
11.9
$ 109.99
Model
www.shimano.com
89
90
Corvalus™
F E AT U R E D
®
H I G H L I G H T S
• Two Post Quick Take Down by unscrewing the thumb screws
the sideplate can be easily removed for maintenance or to adjust
the VBS brake weights.
®
• Non-Disengaging Levelwind System (only on 400 and 401
modles) allows the levelwind to track back and forth during the
cast which reduces drastic line angles that cause unwanted
friction and backlashes on wide-spool reels.
• Aluminum Sides
• Clicker (avaliabale on models 400 and 401) increases the
tension on freespool and activates a clicking alarm when
a fish bites.
• Aluminum Spool
CVL300
CVL200
CVL301
CVL400
CVL401
Corvalus™
Retrieve
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
CVL200
Right
22
8/230, 10/210, 14/120
11.0
3
1
5.2:1
10.8
$ 69.99
CVL300
Right
22
12/240, 14/190, 17/160, 20/120
11.0
3
1
5.2:1
10.9
$ 69.99
CVL301
Left
22
12/240, 14/190, 17/160, 20/120
11.0
3
1
5.2:1
10.9
$ 69.99
CVL400
Right
22
12/330, 14/250, 17/220, 20/165
11.0
3
1
5.2:1
11.8
$ 79.99
CVL401
Left
22
12/330, 14/250, 17/220, 20/165
11.0
3
1
5.2:1
11.8
$ 79.99
Model
www.shimano.com
91
Spinning Features
®
A-RB (Anti-Rust Bearings) are specially treated stainless steel ball bearings that are at least 10 times more corrosion
resistant than standard stainless steel ball bearings. For more information, please see page 102.
®
Super Stopper anti-reverse uses a multi-stop ratchet that nearly eliminates backplay in the rotor for solid
hooksets. The Super Stopper anti-reverse can be turned off to allow backreeling for special techniques and situations.
Super Stopper
®
Super Stopper II is a one-way roller bearing that eliminates backplay for solid hooksets, yet can be turned on or off to
allow back-reeling.
®
Eliminates wobble during the retrieve by counterbalancing the rotor to enhance sensitivity and smoothness.
By using computer balancing, an approach similar to car tire balancing, we are able to redistribute the rotor weight to create
smooth rotation, eliminating vibrations caused by the reel.
Dyna-Balance
®
By using a bearing or bushing, friction is reduced between the pinion gear and spool shaft for increased
smoothness and durability.
Floating Shaft
®
Fluidrive
Tight tolerances and the utmost control in the gear cutting process provide a smooth, powerful retrieve.
®
Fluidrive II Building upon the successes of Fluidrive, which provides extremely tight tolerances and control in the
cutting process, Fluidrive II polishes the gear surface to maximize tooth contact. This increases the efficiency of the
retrieve for more power with less effort.
®
This two-speed oscillation system layers the line onto the spool in a criss-cross pattern that reduces
line-to-line friction for longer casts. Aerowrap reels utilize a worm gear design to move the spool upward quickly and
downward slowly to wind the line in a precise pattern, reducing friction and giving smoother, longer casting ability.
Aerowrap
Varispeed™ Normal oscillation systems use a constant rotation of the oscillation gear that, when translated to the cam,
provides an inconsistent spool speed. This results in line lay that stacks at either end of the spool. By using an oval
oscillation gear, we are able to alter the speed of the oscillation cam to provide a consistent spool speed. This results
in an even line lay that provides excellent castability and manageability.
Cold Forged Aluminum Spool These spools provide increased strength and durability over diecast aluminum or
graphite spools.
92
www.shimano.com
®
Power Roller II This is an oversized line roller that reduces twist from casting and retrieving, and is enhanced with a
tapered area on the support to help the line get onto the roller quicker.
®
Power Roller III is an oversized line roller that reduces twist from casting and retrieving, and uses a cone-shaped
support to help get the line onto the roller quicker, with less chance of tangles or line cuts.
Waterproof Drag With the use of rubber gaskets, the drag is sealed against intrusion of the elements such as water
and dust.
®
Quick Fire II is a system used for easy and fast one-handed casting. The line and trigger self-center, and are within easy
grasp of the angler’s index finger. By pulling the line and the trigger with one hand, the bail opens and is ready to be cast.
TI Spool Lip The titanium coated spool lip provides incredible durability with today’s braided lines. It also drastically
reduces the friction during the cast, allowing for smooth, effortless casting distances.
Machined Aluminum Handle Shank for increased strength and power.
®
This drag adjustment system allows the angler to set the drag for the reel using the rear drag adjustment
knob. During the fight, the angler can quickly increase or decrease the amount of drag by using the Fightin’ Drag Lever.
Fightin’ Drag
®
Expanding upon the same features as Fightin’ Drag, Fightin’ Drag II allows the angler to quickly get
back to the original drag setting by utilizing a strike point on the Fightin’ Drag II lever. When the lever is moved to the
strike position, an audible click is heard and the lever snaps in to position.
Fightin’ Drag II
™
P3™ Power. Precision. Performance. Reels from our P3 lineup are all built using these targets. Power can be found in
our ultra-smooth, efficient drivetrains. Precision comes from tight tolerances and excellent line lay. Performance is the
end result of all of the features packed into the P3 reels.
Metal Series Metal frames keep moving parts in precise alignment for increased efficiency and durability.
Platinum Service Plan With the Platinum Service Plan, when you submit your Warranty Registration Card,
you will receive coupons for discounts on “clean and lubes” (from half off to free!). Also included are Priority Shipping
Labels guaranteeing a 48-hour turnaround time from participating Shimano Satellite Service Centers.
www.shimano.com
93
SR™-Concept
The SR-Concept combines the new concept of
Reliance with all aspects of the S-Concept:
Smooth, Silent and Strong. The Reliance
Concept, or R-Concept, means that dreams in
reel design are now evolving into reality. The
result of the use of the new S-R Concept in
design is the development of many exciting
new features.
SR-3D Gear This oversized drive gear was designed with
three-dimensional analysis. This allows the surface of each
tooth to be contoured exactly to the tooth shape of the
pinion gear. The result is more tooth surface of the drive gear
is in contact with the tooth surface of the pinion gear.
Smoothness, torque, efficiency and durability are all increased.
Rigid Support Drag This innovative new feature eliminates
spool wobble, even at light drag settings. So no matter what
your drag setting is, the spool will not wobble. The result is
an incredibly smooth drag even at extremely light settings.
SR Guard Fin The SR Guard Fins are coated with titanium.
You can find them strategically placed on the rotor and
several parts of the body to protect the reel from impact
damage.
SR Handle This handle screws directly into the drive gear,
resulting in zero play between the handle and gear. The
1000 size handle is a very thin solid shank, while the larger
sizes use a hollow handle shank, that reduces weight while
maintaining extremely strong and durable properties.
SR One-Piece Bail This one-piece bail wire has no gap for
line to snag on during normal operation. Made of stainless
steel, it reduces friction and allows the line to get onto the
line roller quicker.
All Weather Drag Using a water proof gasket, and 48 points
per turn of adjustability, the All Weather Drag is perfect for
any situation. The drag washers themselves are made of
natural wool which provides a wide range of settings, low
start up intertia, and excellent durability.
94
S-Concept
S-Concept represents Shimano’s initial philosophy on
which many of our spinning reels have been designed. The
three basic ideas that are inherent in the S-Concept are
Smooth, Silent and Strong.
Smooth rotation and comfortable retrieve, coupled with excellent drag
performance and longer casting distance, leads to our smooth,
flawless operation.
Silent operation of parts within the reel’s construction represents the
attention to tight tolerances, reducing excessive noise and resulting in
the silent operation of our reels.
Strong, solid and functional construction leads to powerful torque and
durable drivetrains. This gives anglers the strength and confidence
they need to battle elusive gamefish.
The new sizing of our S-Concept reels offers anglers a bigger spool and
smaller body, resulting in a lighter, more comfortable fishing experience
without sacrificing line capacity.
The end result are reels offering anglers smooth, silent and strong reels
that are designed for years of fishing use. The knowledge of fishing
and the minds of Shimano’s engineers have given today’s angler
state-of-the-art reels that are ready for any challenge.
Super Slow Oscillation® The Super Slow Oscillation system evenly
layers line onto the spool, reducing the gaps between the line wraps
that can cause unwanted friction or hang-ups during casting. By laying
the line in an extremely tight parallel pattern—when a layer of line is
wrapped on top of a lower layer of line—there are no crevices or gaps
www.shimano.com
Wide Diameter Drive Gear A wide diameter
drive gear that is 1.28 times larger than those
in previous Shimano® spinning reels provides
more torque and an easier retrieve.
Direct Drive Mechanism The drive gear is
directly attached to the handle, which means
power is transmitted more efficiently with less
vibration while increasing durability.
Black Almite Super Duralumin Drive Gear
The drive gear is made of A7075 series Super
Duralumin aircraft grade aluminum alloy for
high strength and low weight. It is further coated with a layer of Black Almite, a microscopically thin coating that provides scratch resistance
and increased corrosion resistance to saltwater.
Low Wear Rate Pinion Gear The pinion gear
has twice the hardness of its predecessors,
achieving lower wear rate, more durability and
greater longevity.
Stopperless Design means there is no antireverse switch. This means that Stopperless
Designed reels offer maximum protection
against dust and water intrusion.
for the upper layer to embed itself into. When the bail is open and the
reel is cast, the line flows effortlessly off the spool for a longer cast than
found with a traditional oscillation system. Reels with this feature also
come with extra spool support washers to optimize the winding shape
based upon line diameter.
Slow Oscillation This oscillation system is more advanced than
Aerowrap®, which uses a criss-cross line lay to reduce friction. Instead,
slow oscillation uses a tightly packed parallel pattern to reduce the
chance of the upper layer of line grabbing the lower layer, creating
unwanted friction. The result is an evenly shaped line lay, with
excellent castability and control.
S-Arm Cam Line slack around the line roller is the main cause of line
trouble during casting and retrieving. The S-Arm Cam has a protruding
lower surface on the bail arm that helps prevent slack that would lead
to line cuts or tangles.
S-Rotor This high precision rotor is compact and lightweight.
Designed with 3-D surface modeling software, the S-Rotor ensures
a comfortable retrieve.
S-Guard These guards are designed to prevent impact damage to the
frame and rotor. Certain guards, depending on location, also feature
weep holes to prevent water accumulation within the reel.
S-Finish is a multi-coated treatment that not only produces a beautiful
finish, but is more durable than previous finish types.
S-Shield Body Shields at the rotor and handle prevent harmful sand
or water from entering the drivetrain.
S-Bail The flexible and light spring material used for the bail helps to
avoid a “bent bail wire” situation which leads to improper bail operation.
Manual Bail Trip Reels equipped with manual
bail trip do not have an auto trip mechanism
and the bail must be closed manually. This feature brings added line
control during freespool that is imperative to anglers seeking big game.
Maintenance Port The maintenance port is an easily accessed hole
strategically located for easy maintenance of the reel. Using a slot-head
screwdriver, the rubber sealed plug can be removed from the reel. One
drop of lightweight oil or grease can be applied to the drivetrain to
prevent corrosion and to protect the smooth retrieve of the reel. Be sure
to not over-lubricate the reel as excessive lubrication can cause the reel
to become sluggish. Also, after-market spray lubricants may contain
cleaners and degreasers that can actually remove the grease and oil
which protect the reel. This may cause premature corrosion or damage
to the reel. Before using an after-market lubricant, we recommend that
you contact our Customer Service Department at
1-877-577-0600 to be sure it will not damage your reel.
Disk Drag is a large diameter drag disk made of the same material
used in our Tiagra reels and is located under the arbor of the spool.
Twin Disk Drag uses 2 large diameter drag disks made of the same
material used in our Tiagra reels for unbelievable amounts of smooth
drag performance.
Forged AL Spool with Ti-Coated Zirconia Spool Lip The cold forged
aluminum spool has a lip made of titanium-coated zirconia which is
10 times harder than stainless steel. Zirconia is an ideal material for
use in hostile environments and with today’s braided superlines.
Pure Carbon Drag Washer The drag washer is made of pure carbon. It
provides reliable, durable and smooth drag performance at all settings.
Septon®* this handle grip material is soft to the touch and does not
get slippery when wet.
®
www.shimano.com
95
96
®
Stella FB
F E AT U R E D
H I G H L I G H T S
®
• S-Concept Represents Shimano ’s initial
• SR™-Concept The SR-Concept combines the new concept of Reliance with
all aspects of the S-Concept: Smooth,
Silent and Strong. The Reliance Concept,
or R-Concept, means that dreams in reel
design are now evolving into reality. The
result of the use of the new S-R Concept
in design is the development of many
exciting new features.
• SR-3D Gear Designed using 3-D analysis,
this gear allows for more contact between
teeth for increased power and efficiency
• Rigid Support Drag This innovative new
feature eliminates spool wobble, even at
light drag settings.
• SR-Guard Fin The SR Guard Fins are
coated with titanium for increased
resistance to impact damage.
philosophy on which many of our spinning
reels have been designed. The three basic
ideas that are inherent in the S-Concept
are Smooth, Silent and Strong.
• Low Wear Rate Pinion Gear Double the
hardness of our standard pinion gears
for increased durability.
• Maintenance Port A sealed plug that
can be removed using a screwdriver to
easily lubricate the drivetrain without
disassembling the reel.
®
• Super Slow Oscillation Lays the line
perfectly onto the spool for the best line
lay and castability.
• Magnesium Frame Our magnesium
• S-Arm Cam A protruding surface on the
bail arm keeps slack line in contact with
the line roller to reduce the chance of
tangles and line cuts.
frames are safe for use in saltwater and
provide an extremely lightweight reel.
• Magnesium Sideplate
• Aluminum Rotor
• S-Rotor Compact and lightweight to
• Cold Forged Aluminum Spool with
ensure a comfortable retrieve.
• S-Guard Protects the body of the reel
from impact damage.
Titanium Lip
• Black Almite Super Duralumin Drive
Gear is a high strength, low weight gear
that is coated to provide scratch and
corrosion resistance (available only on
3000 and 4000 models).
• S-Finish A multi-coated treatment that
• SR-Handle This handle screws directly
into to the drive gear, resulting in zero
play between the handle and gear. The
1000 size handle is a very thin solid
shank, while the larger sizes use a hollow
handle shank, that reduces weight while
maintaining excellent durability.
• SR-One-Piece Bail This one-piece
stainless steel bail wire has no gap for
line to snag on during normal operation.
produces an extremely durable,
beautiful finish.
• S-Shield Body Rubber shields at the
rotor and body prevent harmful sand or
water from entering the drivetrain.
• S-Bail A flexible spring material used in
the bail assembly helps to avoid a “bent
bail wire” situation.
• Wide Diameter Drive Gear Provides
incredible torque and an easy retrieve.
• All Weather Drag The drag washers are
• Direct Drive Mechanism The drive gear
protected by a waterproof gasket and
provide a wide range of settings, low
start up inertia, and excellent durability.
is directly attached to the handle shaft
for an increased transmission of power.
STL1000FB
STL2500FB
®
• A-RB (Anti-Rust Bearings)
®
• Fluidrive II
• Waterproof Drag
®
• Super Stopper II
®
• Dyna-Balance
®
• Power Roller III
®
• Floating Shaft
• Metal Series
• Platinum Service Plan
STL3000FB
STL4000FB
®
Stella FB
Line Capacity
(# Test/yd)
STL1000FB
24
6/130, 8/100, 10/85, 12/65
7.0
11
1
5.0:1
6.2
$499.99
STL2500FB
29
8/170, 10/150, 12/120
8.0
12
1
5.2:1
8.1
$499.99
STL3000FB
29
8/220, 10/185, 12/150, 16/100
20.0
12
1
5.2:1
8.3
$509.99
STL4000FB
29
12/200, 14/170, 16/150, 20/110
20.0
12
1
4.6:1
10.7
$529.99
Model
Max
Drag (lb)
A-RB
Ball
Bearings
Line Retrieve
Per Crank (in)
www.shimano.com
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
97
98
®
Stella FA
F E AT U R E D
H I G H L I G H T S
• Aluminum Frame
• Direct Drive Mechanism (except on models 1000 and 2500)
the drive gear is directly attached to the handle shaft for an
increased transmission of power.
• Aluminum Sideplate
• Cold Forged Aluminum Spool with Titanium Lip
• Pure Carbon Drag provides reliable and durable, smooth drag
®
• S-Concept Represents Shimano ’s initial philosophy on which
performance from light to heavy drag settings.
many of our spinning reels have been designed. The three basic
ideas that are inherent in the S-Concept are Smooth, Silent and
Strong.
• Twin Disk Drag (available only on models 10000 and 20000)
uses 2 large diameter drag disks made of the same material
®
used in our Tiagra reels for unbelievable amounts of smooth
drag performance.
®
• Super Slow Oscilation Lays the line perfectly onto the spool
for the best line lay and castability.
• Disk Drag (available only on models 6000 and 8000) is a large
• Slow Oscilation Lays the line in a parallel pattern for excellent
diameter drag disk made of the same material used in our
Tiagra reels and is located under the arbor of the spool.
castability and control.
• Maintenance Port A sealed plug that can be removed using
• Black Almite Super Duralumin Drive Gear (except on models
a screwdriver to easily lubricate the drivetrain without
1000 and 2500) is a high strength, low weight gear that is
coated to provide scratch and corrosion resistance.
• S-Bail (available only on 1000 and 2500 models) A flexible
• Low Wear Rate Pinion Gear (except on models 1000 and 2500)
spring material used in the bail assembly helps to avoid a “bent
bail wire” situation.
Double the hardness of our standard pinion gears for increased
durability.
®
• S-Arm Cam A protruding surface on the bail arm keeps slack
line in contact with the line roller to reduce the chance of
®
• Fluidrive II
• S-Finish A multi-coated treatment that produces an extremely
durable, beautiful finish.
• Waterproof Drag
• S-Guard Protects the body of the reel from impact damage.
®
• Super Stopper II
• S-Shield Body Rubber shields at the rotor and body prevent
• Machined Aluminum Handle Shank
harmful sand or water from entering the drivetrain.
®
• Septon * Handle Grip
• S-Rotor Compact and lightweight to ensure a comfortable
®
• Dyna-Balance
retrieve.
®
• Power Roller III
• Stopperless Design (except on models 1000 and 2500) means
there is no anti-reverse switch for maximum protection against
dust, sand and water.
®
• Floating Shaft
• Platinum Service Plan
• Manual Bail Trip (available only on 10000 and 20000 models
only) brings added line control during freespool that is imperative
to big-game seeking anglers.
• Metal Series
®
Stella FA
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
STL1000FA
24
2/270, 4/140, 6/110
10.0
12
1
5.2:1
6.7
$489.99
STL2500FA
29
6/200, 8/140, 10/120
8.5
14
1
5.2:1
8.1
$499.99
STL4000FA
35
8/240, 10/200, 12/160
22.5
15
1
5.7:1
12.7
$539.99
STL5000FA
37
10/240, 12/195, 14/165
22.5
15
1
5.7:1
13.2
$549.99
STL6000FA
42
12/265, 16/170, 20/120
44.0
15
1
5.7:1
23.6
$589.99
STL8000FA
40
12/325, 16/250, 20/185
44.0
15
1
5.0:1
22.8
$599.99
STL10000FA
47
12/500, 16/330, 20/220
65.0
15
1
6.0:1
31.4
$659.99
STL20000FA
41
20/460, 25/380, 30/320
58.0
15
1
4.4:1
32.6
$699.99
Model
®
www.shimano.com
99
®
Stella FA
STL1000FA
STL2500FA
STL4000FA
STL5000FA
100
www.shimano.com
STL6000FA
STL8000FA
STL10000FA
STL20000FA
www.shimano.com
101
102
®
Sustain FD
F E AT U R E D
H I G H L I G H T S
®
• Aluminum Frame
• Aluminum Spool
• Graphite Sideplate
®
• Fluidrive II uses the successes of Fluidrive, but also uses a
• Graphite Rotor
polishing process to increase tooth contact for increased efficiency.
®
• Super Stopper II is a one-way roller bearing that eliminates
• Titanium Spool Lip reduces friction during the cast and
increases durability for both the reel and the line.
backplay for solid hooksets, yet can be turned on or off to
allow back-reeling.
• Cold Forged Aluminum Spool with Titanium Spool Lip provides
increased strength and durability.
• Machined Aluminum Handle Shank for increased strength and power.
®
• Septon * Handle Grip This handle grip material is soft to the
• Spare Cold Forged Aluminum Spool with Titanium Spool Lip
Included with reel.
touch and does not get slippery when wet.
®
• S-Concept represents Shimano ’s initial philosophy on which many
®
• Dyna-Balance similar to balancing a tire, we use
of our spinning reels have been designed. The three basic ideas
that are inherent in the S-Concept are Smooth, Silent and Strong.
counterbalancing techniques in the rotor to eliminate wobble
during the retrieve.
®
• Power Roller III is an oversized line roller that reduces twist from
• Slow Oscillation Lays the line in a parallel pattern for excellent
casting and retrieving, using a cone-shaped support to help get
the line onto the roller quicker.
• Maintenance Port A sealed plug that can be removed using
®
• Floating Shaft By using a bearing or bushing, friction is
reduced between the pinion gear and spool shaft for increased
• S-Arm Cam A protruding surface on the bail arm keeps slack
• S-Guard Protects the body of the reel from impact damage.
• Direct Drive Mechanism the drive gear is directly connected to
the handle shaft for an increased transmission of power (4000,
5000, 6000 and 8000 sizes).
• S-Rotor is compact and lightweight to ensure a comfortable retrieve.
SA1000FD
SA5000FD
SA2500FD
SA4000FD
SD6000FD
SD8000FD
®
Sustain FD
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SA1000FD
29
2/270, 4/140, 6/110
7.0
6
1
6.0:1
7.8
$229.99
SA2500FD
33
6/200, 8/140, 10/120
12.0
6
1
6.0:1
9.6
$229.99
SA4000FD
35
8/240, 10/200, 12/160
18.0
6
1
5.7:1
14.0
$249.99
SA5000FD
37
10/240, 12/195, 14/165
18.0
6
1
5.7:1
14.2
$249.99
SA6000FD
42
12/265, 16/170, 20/120
24.0
6
1
5.7:1
21.0
$299.99
SA8000FD
42
12/325, 16/250, 20/185
24.0
6
1
5.7:1
20.6
$299.99
Model
®
www.shimano.com
103
104
®
Stradic MgFA
F E AT U R E D
H I G H L I G H T S
®
• Magnesium Frame
®
• Graphite Rotor
backplay for solid hooksets, yet can be turned on or off to allow
back-reeling.
• Cold Forged Aluminum Spool provides increased strength
and durability.
• S-Concept represents Shimano’s initial philosophy on which
many of our spinning reels have been designed. The three
basic ideas that are inherent in the S-Concept are Smooth,
Silent and Strong.
• Slow Oscillation lays the line in a parallel pattern for excellent
• Machined Aluminum Handle Shank for increased strength
and power.
®
• Septon * Handle Grip This handle grip material is soft to the
touch and does not get slippery when wet.
®
• Maintenance Port a sealed plug that can be removed using
®
• Power Roller III is an oversized line roller that reduces twist
from casting and retrieving, using a cone-shaped support
to help get the line onto the roller quicker.
• S-Guard protects the body of the reel from impact damage.
• S-Arm Cam a protruding surface on the bail arm keeps slack
®
®
• Floating Shaft by using a bearing or bushing, friction is
ST2500MgFA
ST4000MgFA
®
Stradic MgFA
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
ST2500MgFA
33
6/200, 8/140, 10/120
15.0
4
1
6.0:1
8.4
$189.99
ST4000MgFA
35
8/240, 10/200, 12/165
20.0
4
1
5.7:1
11.8
$189.99
Model
®
O U R M A G N E S I U M R E E L S A R E S A F E F O R U S E I N S A LT WAT E R !
Magnesium is an extremely lightweight metal that reduces the overall
weight of the reel. Without a special protectant, magnesium is normally
highly susceptible to corrosion in saltwater.
The magnesium parts in our reels are specially treated to protect them
from premature corrosion or damage from saltwater use.
While our magnesium reels are safe to use in saltwater, care should be
taken when oiling the reel or filling the spool with line, etc., as scratches
through the protective surface coating caused by line cutters or other
tools can lead to premature rust and corrosion.
So, go ahead, fish the flats, fish the backwaters and rest assured, we’ve
protected your investment!
www.shimano.com
105
106
®
Stradic FH
F E AT U R E D
H I G H L I G H T S
®
• Aluminum Frame
from casting and retrieving, using a cone-shaped support
to help get the line onto the roller quicker.
and durability.
®
• Floating Shaft by using a bearing or bushing, friction is
• Graphite Rotor
®
• S-Concept represents Shimano ’s initial philosophy on which
• Spare Cold Forged Aluminum Spool provides increased
strength and durability.
many of our spinning reels have been designed. The three
basic ideas that are inherent in the S-Concept are Smooth,
Silent and Strong.
®
®
®
allow back-reeling.
• S-Guard protects the body of the reel from impact damage.
• S-Rotor is compact and lightweight to ensure a comfortable
retrieve.
®
tangles and line cuts
ST1000FH
ST2500FH
ST5000FH
ST4000FH
ST6000FH
ST8000FH
®
Stradic FH
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
ST1000FH
29
2/270, 4/140, 6/110
7.0
4
1
6.0:1
7.9
$119.99
ST2500FH
33
6/200, 8/140, 10/120
12.0
4
1
6.0:1
9.7
$119.99
ST4000FH
35
8/240, 10/200, 12/160
18.0
4
1
5.7:1
13.4
$139.99
ST5000FH
37
10/240, 12/195, 14/165
18.0
4
1
5.7:1
13.3
$139.99
ST6000FH
42
12/265, 16/170, 20/120
24.0
4
1
5.7:1
21.0
$159.99
ST8000FH
42
12/325, 16/250, 20/185
24.0
4
1
5.7:1
20.6
$159.99
Model
www.shimano.com
107
108
®
Symetre FI
F E AT U R E D
• Aluminum Frame (except on model 750 which is graphite).
and durability.
H I G H L I G H T S
®
®
• Graphite Rotor
®
allow back-reeling.
®
ideas that are inherent in the S-Concept are Smooth, Silent
and Strong.
• S-Arm Cam protruding surface on the bail arm keeps slack line
in contact with the line roller to reduce the chance of tangles
and line cuts.
• Maintenance Port a sealed plug that can be removed using a
screwdriver to easily lubricate the drivetrain without disassembling
the reel.
®
®
• Power Roller II is an oversized line roller that reduces twist
from casting and retrieving and is enhanced with a tapered area
on the support to help line get onto the roller.
®
• Metal Series (except model 750) Metal frames keep moving
parts in precise alignment for increased efficiency and durability.
• Ported Handle Shank (only on model 750) reduces the overall
weight of the reel.
SY750FI
SY1500FI
SY2500FI
SY4000FI
®
Symetre FI
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SY750FI
22
2/240, 4/120, 6/95
7.0
4
1
4.7:1
6.9
$79.99
SY1500FI
28
4/170, 6/130, 8/90
11.0
4
1
6.0:1
9.5
$79.99
SY2500FI
31
6/200, 8/140, 10/120
15.0
4
1
6.0:1
9.5
$79.99
SY4000FI
31
8/240, 10/200, 12/160
15.5
4
1
5.7:1
13.3
$79.99
Model
www.shimano.com
109
110
®
Symetre RI
F E AT U R E D
H I G H L I G H T S
®
• Aluminum Frame
and durability.
• Slow Oscillation Lays the line in a parallel pattern for excellent
• Graphite Rotor
®
®
ideas that are inherent in the S-Concept are Smooth, Silent
and Strong.
®
allow back-reeling.
®
• S-Arm Cam Protruding surface on the bail arm keeps slack line
in contact with the line roller to reduce the chance of tangles
and line cuts.
®
®
• Fightin’ Drag This drag adjustment system allows the angler to
set the drag for the reel using the rear drag adjustment knob.
During the fight, the angler can quickly increase or decrease the
amount of drag by using the Fightin’ Drag Lever.
• Maintenance Port a sealed plug that can be removed using a
screwdriver to easily lubricate the drivetrain without disassembling
the reel.
®
SY1500RI
SY2500RI
SY4000RI
®
Symetre RI
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SY1500RI
30
4/170, 6/130, 8/90
6.0
4
1
6.0:1
10.1
$79.99
SY2500RI
33
6/200, 8/140, 10/120
6.0
4
1
6.0:1
10.1
$79.99
SY4000RI
35
8/240, 10/200, 12/160
7.0
4
1
5.7:1
13.9
$79.99
Model
www.shimano.com
111
112
®
Sahara FB
F E AT U R E D
H I G H L I G H T S
®
• Aluminum Frame (graphite on 750).
• Graphite Rotor
®
allow back-reeling.
and durability.
• Spare Cold Forged Aluminum Spool
• Ported Handle Shank (only on model 750) reduces the overall
weight of the reel.
• Paddle Handle Grips (except on model 4000 which is
®
• Dyna-Balance Similar to balancing a tire, we use
Flat T Type).
• S-Concept (only on model 750) represents Shimano's initial
philosophy on which many of our spinning reels have been
designed. The three basic ideas that are inherent in the
S-Concept are Smooth, Silent and Strong.
®
®
castability and control (only 750 size).
disassembling the reel (only 750 size).
tangles and line cuts (only 750 size).
alignment for increased efficiency and durability (excluding
750 models).
®
SH750FB
SH1500FB
SH2500FB
SH4000FB
®
Sahara FB
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SH750FB
22
2/240, 4/120, 6/95
7.0
3
1
4.7:1
6.9
$59.99
SH1500FB
28
4/170, 6/130, 8/90
9.0
3
1
6.2:1
9.5
$59.99
SH2500FB
30
6/200, 8/140, 10/120
11.0
3
1
6.2:1
9.7
$59.99
SH4000FB
34
8/240, 10/200, 12/160
17.0
3
1
6.0:1
12.1
$59.99
Model
www.shimano.com
113
®
Spirex
F E AT U R E D
H I G H L I G H T S
• Aluminum Frame
• Graphite Rotor
• Spare Graphite Spool
and durability.
• Double Paddle Handle Grip
• Fluidrive® II uses the successes of Fluidrive, but also uses a
• Quick Fire II® is a one-stop ratchet system that automatically
centers a trigger for easy, one-handed casting.
• Dyna-Balance® similar to balancing a tire, we use
• Power Roller® II is an oversized line roller that reduces twist
on the support to help line get onto the roller quicker.
SR1000FE
SR2000FE
SR4000FE
®
Spirex FE
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SR1000FE
24
2/270, 4/140, 6/110
10.0
5
0
5.2:1
9.9
$59.99
SR2000FE
26
6/170, 8/120, 10/100
10.0
5
0
5.2:1
10.2
$59.99
SR4000FE
29
8/240, 10/200, 12/160
11.0
5
0
5.2:1
13.3
$59.99
Model
114
www.shimano.com
F E AT U R E D
H I G H L I G H T S
• Graphite Frame, Sideplate and Rotor for reduced weight.
• Aluminum Spool
• Spare Aluminum Spool
• Varispeed™ By using an oval oscillation gear, we are able to
provide a consistent spool speed for an even line lay which
results in excellent castability and manageability.
• S-Arm Cam a protruding surface on the bail arm keeps slack line
in contact with the line roller to reduce the chance of tangles and
line cuts.
• Fluidrive® II uses the successes of Fluidrive, but also uses
a polishing process to increase tooth contact for increased
efficiency.
• Quick Fire® II is a one-stop ratchet system that automatically
• Fightin’ Drag® using the knob allows the angler to set the drag,
while the lever can be used to quickly increase or decrease the
drag setting while fighting a fish.
SR1000RE
SR2500RE
SR4000RE
®
Spirex RE
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
SR1000RE
30
2/270, 4/140, 6/110
6.0
5
0
6.0:1
9.4
$59.99
SR2500RE
34
6/200, 8/140, 10/120
7.0
5
0
6.0:1
10.8
$59.99
SR4000RE
35
8/240, 10/200, 12/160
9.0
5
0
5.2:1
14.4
$59.99
Model
www.shimano.com
MSRP
115
116
®
Sedona FB
F E AT U R E D
H I G H L I G H T S
®
• Fluidrive uses the successes of Fluidrive, but also uses a
• Graphite Frame
®
• Graphite Rotor
and durability.
®
• Spare Cold Forged Aluminum Spool (except model 750)
allow back-reeling.
®
• S-Concept (only on model 750) represents Shimano ’s initial
philosophy on which many of our spinning reels have been
designed. The three basic ideas that are inherent in the
S-Concept are Smooth, Silent and Strong.
• Ported Handle Shank (only on model 750, otherwise standard)
reduces the overall weight of the reel.
• Slow Oscillation (only on model 750) lays the line in a parallel
pattern for excellent castability and control.
®
• Maintenance Port (only on model 750) a sealed plug that can
be removed using a screwdriver to easily lubricate the drivetrain
without disassembling the reel.
• S-Arm Cam (only on model 750) a protruding surface on the
bail arm keeps slack line in contact with the line roller to reduce
the chance of tangles and line cuts.
SE750FB
SE1500FB
SE4000FB
SE2500FB
SE6000FB
SE8000FB
®
Sedona FB
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SE750FB
22
2/240, 4/120, 6/95
7.0
2
1
4.7:1
6.9
$49.99
SE1500FB
24
4/170, 6/130, 8/90
9.0
3
1
5.2:1
9.6
$49.99
SE2500FB
26
6/200, 8/140, 10/120
11.0
3
1
5.2:1
9.8
$49.99
SE4000FB
28
8/240, 10/200, 12/160
17.0
3
1
5.1:1
12.7
$49.99
SE6000FB
30
10/310, 12/240, 14/210
19.5
3
1
4.4:1
21.2
$69.99
SE8000FB
33
12/320, 14/270, 16/220
19.5
3
1
4.4:1
20.2
$69.99
Model
www.shimano.com
117
118
®
Sedona RB
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
allow back-reeling.
• Graphite Rotor
®
• Fightin’ Drag using the knob allows the angler to set the drag,
and durability.
• Barrel Handle Grip (except model 1500 which is paddle).
®
• A-RB (Anti-Rust Bearings) are specially treated stainless
steel ball bearings that are at least 10 times more corrosion
resistant than standard stainless steel ball bearings.
®
®
• Fluidrive uses tight tolerances and the utmost control in the
gear cutting process to provide a smooth, powerful retrieve.
SE1500RB
SE2500RB
SE4000RB
®
Sedona RB
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SE1500RB
26
4/170, 6/130, 8/90
6.0
3
1
5.2:1
9.9
$49.99
SE2500RB
28
6/200, 8/140, 10/120
6.0
3
1
5.2:1
10.2
$49.99
SE4000RB
30
8/240, 10/200, 12/160
7.0
3
1
5.2:1
12.7
$49.99
Model
www.shimano.com
119
®
Solstace
F E AT U R E D
H I G H L I G H T S
• Aluminum Frame
• Graphite Rotor
• Diecast Aluminum Spool
• Spare Diecast Aluminum Spool
• Paddle Grip (except 4000, which is barrel)
SO1000FH
SO4000FH
SO2000FH
®
Solstace FH
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SO1000FH
24
2/270, 4/140, 6/110
10.0
4
5.2:1
9.3
$49.99
SO2000FH
26
6/170, 8/120, 10/100
10.0
4
5.2:1
9.4
$49.99
SO4000FH
29
8/240, 10/200, 12/160
11.0
4
5.2:1
12.5
$49.99
Model
120
www.shimano.com
F E AT U R E D
H I G H L I G H T S
• Aluminum Spool
• Spare Aluminum Spool
provide a consistent spool speed for an even line lay which results
in excellent castability and manageability.
• S-Arm Cam a protruding surface on the bail arm keeps slack line
in contact with the line roller to reduce the chance of tangles and
line cuts.
•
®
Fightin’ Drag using the knob allows the angler to set the drag,
• Power Roller® II is an oversized line roller that reduces twist from
casting and retrieving and is enhanced with a tapered area on the
support to help line get onto the roller quicker.
SO1000RH
SO2500RH
SO4000RH
®
Solstace RH
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SO1000RH
30
2/270, 4/140, 6/110
6.0
4
0
6.0:1
8.6
$49.99
SO2500RH
34
6/200, 8/140, 10/120
7.0
4
0
6.0:1
10.0
$49.99
SO4000RH
35
8/240, 10/200, 12/160
9.0
4
0
5.2:1
13.4
$49.99
Model
www.shimano.com
121
122
®
Sonora FA
F E AT U R E D
H I G H L I G H T S
®
• Fluidrive uses the successes of Fluidrive, but also uses a
• Graphite Frame
• Graphite Rotor
®
allow back-reeling.
• Paddle Handle Grip (except on 4000 size which is a barrel grip).
®
and durability.
®
®
SON1500FA
SON4000FA
SON2500FA
®
Sonora FA
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SON1500FA
24
4/170, 6/130, 8/90
9.0
2
1
5.2:1
9.6
$39.99
SON2500FA
26
6/200, 8/140, 10/120
11.0
2
1
5.2:1
9.8
$39.99
SON4000FA
28
8/240, 10/200, 12/160
17.0
2
1
5.1:1
12.7
$39.99
Model
www.shimano.com
123
124
®
Sienna FB
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
allow back-reeling.
• Graphite Rotor
®
®
• Ported Handle Shank reduces the overall weight of the reel.
• P3™ Reels in our P3 series are designed using the philosophy
of Power, Precision and Performance.
SN1000FB
SN2500FB
SN4000FB
®
Sienna FB
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SN1000FB
25
2/270, 4/140, 6/110
7.0
3
1
5.2:1
7.4
$29.99
SN2500FB
29
6/200, 8/140, 10/120
7.0
3
1
5.2:1
9.0
$29.99
SN4000FB
32
8/240, 10/200, 12/160
13.0
3
1
5.2:1
12.5
$29.99
Model
www.shimano.com
125
126
®
Syncopate FD
F E AT U R E D
H I G H L I G H T S
®
• Quick Fire II is a one-stop ratchet system that automatically
• Graphite Frame
centers the trigger for easy, one-handed casting.
®
• Graphite Rotor
®
• Barrel Handle Grip (except model 1000 which is a paddle).
SC1000FD
SC2000FD
SC4000FD
®
Syncopate FD
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SC1000FD
24
2/270, 4/140, 6/110
7.0
4
0
5.2:1
9.2
$29.99
SC2000FD
26
6/170, 8/120, 10/100
7.0
4
0
5.2:1
9.5
$29.99
SC4000FD
31
8/240, 10/200, 12/160
13.0
4
0
5.2:1
12.3
$29.99
Model
www.shimano.com
127
128
®
Sidestab RE
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
®
back-reeling.
• Port Handle Shank reduces the overall weight of the reel.
• Graphite Rotor
®
SI1000RE
SI2500RE
SI4000RE
®
Sidestab RE
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
$29.99
SI1000RE
25
2/270, 4/140, 6/110
7.0
3
1
5.2:1
8.3
SI2500RE
29
6/200, 8/140, 10/120
7.0
3
1
5.2:1
9.5
$29.99
SI4000RE
32
8/240, 10/200, 12/160
12.0
3
1
5.2:1
13.0
$29.99
www.shimano.com
129
130
®
Slade FB
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
• Graphite Rotor
•
®
Diecast Aluminum Spool
allow back-reeling.
•
Ported Handle Shank reduces the overall weight of the reel.
®
SL1000FB
SL2500FB
SL4000FB
®
Slade FB
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SL1000FB
25
2/270, 4/140, 6/110
7.0
1
1
5.2:1
7.4
$24.99
SL2500FB
29
6/200, 8/140, 10/120
7.0
1
1
5.2:1
9.0
$24.99
SL4000FB
32
8/240, 10/200, 12/160
13.0
1
1
5.2:1
12.5
$24.99
Model
www.shimano.com
131
®
TX
132
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
• Graphite Rotor
®
on the support to help line get onto the roller quicker (not
available on 500 size).
®
• Quick Fire II (except model 500) is a one-stop ratchet system
that automatically centers a trigger for easy, one-handed casting.
TX500FA
TX1000FB
TX4000FB
TX2000FB
®
TX
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TX500FA
18
2/190, 4/100, 6/60
4.0
2
4.2:1
5.9
$24.99
TX1000FB
24
2/270, 4/140, 6/110
7.0
2
5.2:1
9.0
$24.99
TX2000FB
26
6/170, 8/120, 10/100
15.0
2
5.2:1
9.3
$24.99
TX4000FB
31
8/240, 10/200, 12/160
20.0
2
5.2:1
12.2
$24.99
Model
www.shimano.com
133
134
®
CX RB
F E AT U R E D
H I G H L I G H T S
®
• Graphite Frame
allow back-reeling.
• Graphite Rotor
®
• Ported Handle Shank reduces the overall weight of the reel.
®
CX1000RB
CX2500RB
CX4000RB
®
CX RB
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
CX1000RB
25
2/270, 4/140, 6/110
7.0
1
1
5.2:1
8.3
$24.99
CX2500RB
29
6/200, 8/140, 10/120
7.0
1
1
5.2:1
9.5
$24.99
CX4000RB
32
8/240, 10/200, 12/160
12.0
1
1
5.2:1
13.0
$24.99
Model
www.shimano.com
135
136
®
AX FB
F E AT U R E D
H I G H L I G H T S
• Ported Handle Shank reduces the overall weight of the reel
• Diecast Aluminum Spool for casting performance and durability.
(not available on AX-ULSA).
®
results in excellent castability and manageability (not available
on AX-ULSA).
®
from casting and retrieving and is enhanced with a tapered
area on the support to help line get onto the roller quicker
(not available on AX-ULSA).
®
back reeling (not available on AX-ULSA).
AXULSA
AX1000FB
AX4000FB
AX2500FB
®
AX FB
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
AX-ULSA
18
2/190, 4/100, 6/60
4.0
1
0
4.2:1
5.6
$19.99
AX1000FB
25
2/270, 4/140, 6/110
4.5
1
1
5.2:1
7.3
$19.99
AX2500FB
29
6/200, 8/140, 10/120
6.5
1
1
5.2:1
8.9
$19.99
AX4000FB
32
8/240, 10/200, 12/160
13.0
1
1
5.2:1
12.5
$19.99
Model
www.shimano.com
137
138
®
FX FB
F E AT U R E D
H I G H L I G H T S
• Diecast Aluminum Spool for casting performance and durability.
• Super Stopper is a multi-stop ratchet system that minimizes
backplay for hooksetting power.
FX1000FB
FX2000FB
FX4000FB
®
FX FB
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
FX1000FB
22
2/270, 4/140, 6/110
4.5
1
0
4.6:1
6.9
$14.99
FX2500FB
26
6/200, 8/140, 10/120
6.5
1
0
4.6:1
8.4
$14.99
FX4000FB
28
8/240, 10/200, 12/160
13.0
1
0
4.6:1
12.0
$14.99
Model
www.shimano.com
139
AX RA
F E AT U R E D
H I G H L I G H T S
• Graphite Frame
®
• Graphite Rotor
®
• Dyna-Balance Similar to balancing a tire, we
use counterbalancing techniques in the rotor to
eliminate wobble during the retrieve.
®
• Quick Fire II is a one-stop ratchet system
that automatically centers the trigger for easy,
one-handed casting.
®
AX RA
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Ball
Bearings
Gear
Ratio
Weight
(oz)
MSRP
AX1000RA
24
2/270, 4/140, 6/110
7.0
1
5.2:1
9.3
$19.99
AX2000RA
26
6/170, 8/120, 10/100
7.0
1
5.2:1
9.5
$19.99
AX4000RA
28
8/240, 10/200, 12/160
15.0
1
4.6:1
12.3
$19.99
Model
140
www.shimano.com
FX RB, IX R
H I G H L I G H T S
®
F E AT U R E D
®
• Graphite Frame
• Graphite Rotor
• Quick Fire II® is a one-stop ratchet system
one-handed casting.
®
FX RA
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Gear
Ratio
Weight
(oz)
MSRP
FX1000RA
19
2/270, 4/140, 6/110
7.0
4.1:1
9.1
$14.99
FX2000RA
21
6/170, 8/120, 10/100
7.0
4.1:1
9.3
$14.99
FX4000RA
24
8/240, 10/200, 12/160
15.0
4.1:1
12.2
$14.99
Model
F E AT U R E D
H I G H L I G H T S
• Graphite Frame
• Graphite Rotor
• Graphite Spool
• Quick Fire II® is a one-stop ratchet system
one-handed casting.
• Rear Drag
®
IX R
Model
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
Gear
Ratio
Weight
(oz)
MSRP
$9.99
IX1000R
19
2/270, 4/140, 6/110
7.0
4.1:1
8.4
IX2000R
21
6/170, 8/120, 10/100
7.0
4.1:1
8.6
$9.99
IX4000R
24
8/240, 10/200, 12/160
15.0
4.1:1
11.4
$9.99
www.shimano.com
141
Saltwater Spinning Features
®
A-RB (Anti-Rust Bearings) A-RB bearings are
stainless steel ball bearings that have been through
the A-RB treatment process which makes them at
least 10 times more corrosion resistant than
standard stainless steel ball bearings (see page 102
for more information).
®
Super Stopper II Super Stopper II anti-reverse uses
a one-way bearing that eliminates backplay. This
provides the angler with instant hooksetting power. In
some reels, the Super Stopper II can be turned off to
allow backreeling for special techniques and situations.
®
Power Roller II This is an oversized line roller that
reduces twist from casting and retrieving and is
enhanced with a tapered area on the support to help
line get onto the roller quicker.
®
Power Roller III This is an oversized line roller that
reduces twist from casting and retrieving, and uses a
cone-shaped support to help get the line onto the roller
quicker, with less chance of tangles or line cuts.
Cold Forged Aluminum Spool These spools provide
increased strength and durability over diecast
aluminum or graphite spools.
®
Dyna-Balance This feature eliminates wobble during
the retrieve by counterbalancing the rotor to enhance
sensitivity and smoothness. By using computer balancing,
an approach similar to car tire balancing, we are able to
redistribute the rotor weight to create smooth rotation and
eliminate vibrations caused by the reel.
®
Fluidrive Fluidrive brings the highest tolerances and
utmost control in the gear cutting process, which
provides the angler a smooth, powerful retrieve.
TI Spool Lip The titanium coated spool lip provides
incredible durability with today's braided lines. It also
drastically reduces the friction during the cast allowing
for smooth, effortless casting distances.
Waterproof Drag With the use of rubber gaskets the
drag is sealed against intrusion of the elements such
as water and dust.
®
®
Fluidrive II Building upon the successes of Fluidrive,
which provides extremely tight tolerances and control
in the cutting process, Fluidrive II polishes gear
surfaces to maximize tooth contact which increases the
efficiency of the retrieve for more power with less effort.
®
Floating Shaft With this feature, using a bearing or
bushing, friction is reduced between the pinion gear and
spool shaft for increased smoothness and durability.
Baitrunner The Baitrunner lever, providing a
secondary drag system, allows an angler to feed out line
in tension-controlled freespool with the bail closed. This
enables the angler to let the fish take the bait and run,
while maintaining line control by having the bail closed.
To engage the primary drag and set the hook, simply
turn the handle or flip the Baitrunner lever to the
“Baitrunner Off” position and the fight is on.
Rubber Handle Grip is comfortable and soft to
the touch.
®
Aerowrap This two-speed oscillation system layers
the line onto the spool in a criss-cross pattern that
reduces line-to-line friction for longer casts. Aerowrap
reels utilize a worm gear design to move the spool
upward quickly and downward slowly to wind the line
in a precise pattern, reducing friction and giving
smoother, longer casting ability.
Aerowave™ This oscillation system incorporates the
strength of a standard system with some of the line
winding performance advantages of a two-speed worm
driven system. Aerowave will wrap the line onto the
spool so that it does not dig into itself and reduces the
chance of the line stacking at one end of the spool.
The result is an extremely strong system that provides
longer casts and a smoother feeling when a fish is
pulling drag than standard oscillation systems.
142
Machined Aluminum Handle Shank for increased
strength and power.
Metal Series The metal construction showcased in
some of our finest reels now appears throughout our
line of Metal Series products. Metal frames not only
keep moving parts in precise alignment, they also
feature the use of the latest anodizing, plating and
painting techniques for beautiful and durable finishes.
Platinum Service Plan With the Platinum Service
Plan, when you submit your Warranty Registration
Card, you will receive coupons for discounts on “clean
and lubes” (from half off to free!) Also included are
Priority Shipping Labels guaranteeing a 48-hour
turnaround time from participating Shimano Satellite
Service Centers.
www.shimano.com
Saltwater Spinning Reels
www.shimano.com
143
144
®
Thunnus F
F E AT U R E D
H I G H L I G H T S
®
• Aluminum Frame
allow back-reeling.
• Aluminum Sideplate
• Aluminum Rotor
®
and durability.
• Flat T Type Handle Grip
®
®
®
• Baitrunner is a secondary drag system that allows for
controlled freespool with the bail closed. By flipping the lever
or turning the handle, the primary drag quickly takes over.
®
• Aerowrap worm drive oscillation wraps the line onto the spool in a
®
• Fluidrive uses tight tolerances and the utmost control in the
criss-cross pattern to reduce friction and increase casting distance.
gear cutting process to provide a smooth, powerful retrieve.
TU6000F
TU12000F
TU16000F
®
Thunnus F
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
TU6000F
31
10/300, 12/265, 16/170, 20/120
17.0 / 1.8
5
1
4.6:1
25.4
$219.99
TU12000F
37
10/640, 12/550, 16/350, 20/265
17.0 / 1.8
5
1
4.6:1
31.0
$229.99
TU16000F
40
12/660, 16/440, 20/350, 25/290
17.0 / 1.8
5
1
4.6:1
31.0
$239.99
Model
www.shimano.com
145
146
®
Baitrunner B
F E AT U R E D
H I G H L I G H T S
• Graphite Frame
®
• Graphite Rotor
allow back-reeling.
• Flat T Type Handle Grip
®
®
®
• Baitrunner is a secondary drag system that allows for
®
controlled freespool with the bail closed. By flipping the lever
or turning the handle, the primary drag quickly takes over.
BTR3500B
from casting and retrieving, using a cone-shaped support to
help get the line onto the roller quicker.
BTR4500B
BTR6500B
®
Baitrunner B
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
BTR3500B
33
8/305, 12/230, 14/185
9.0 / 1.8
3
1
4.7:1
19.8
$99.99
BTR4500B
37
14/295, 17/250, 20/195
15.0 / 1.2
3
1
4.8:1
22.2
$109.99
BTR6500B
36
20/270, 25/230, 30/185
15.8 / 1.2
3
1
4.2:1
30.7
$119.99
Model
www.shimano.com
147
148
®
Spheros FA
F E AT U R E D
®
• Aluminum Frame
H I G H L I G H T S
• Aerowave™ (3000-8000 models only) uses the strength of a
standard oscillation system and the multiple speeds similar to
that found on a worm-drive system to provide excellent line lay
with awesome durability.
®
• Aerowrap (12000 and 14000 model only) Worm drive oscillation
• Graphite Rotor (except for models 12000 and 14000 which
are aluminum).
• Cold Forged Aluminum Spool provides increased strength and
durability.
• Flat T Type handle configuration.
wraps the line onto the spool in a criss-cross pattern to reduce
friction and increase casting distance.
®
back-reeling.
• TI Spool Lip reduces friction during the cast and increases
®
durability for both the reel and the line.
®
®
from casting and retrieving, and uses a cone-shaped support to
help get the line onto the roller quicker.
SP3000FA
SP4000FA
SP5000FA
SP8000FA
SP6000FA
SP12000FA
SP14000FA
®
Spheros FA
Line Retrieve
Per Crank (in)
Line Capacity
(# Test/yd)
Max
Drag (lb)
A-RB
Ball
Bearings
Roller
Bearings
Gear
Ratio
Weight
(oz)
MSRP
SP3000FA
28
6/230, 8/170, 10/140
12.5
3
1
5.1:1
12.5
$79.99
SP4000FA
30
8/240, 10/200, 12/160
15.0
3
1
5.1:1
12.7
$79.99
SP5000FA
32
10/240, 12/195, 14/165, 16/140
20.5
3
1
4.7:1
20.0
$99.99
SP6000FA
34
10/300, 12/265, 16/170, 20/120
20.5
3
1
4.7:1
20.5
$99.99
SP8000FA
35
20.5
3
1
4.7:1
19.8
$109.99
SP12000FA
39
12/550, 16/350, 20/265
20.0
4
1
4.6:1
28.4
$129.99
SP14000FA
40
20/350, 25/290, 30/220
24.0
4
1
4.6:1
28.9
$139.99
Model
10/390, 12/320, 14/270, 16/220, 20/160
www.shimano.com
149
Customer Service
As the manufacturer of the highest quality fishing tackle
products on the market today, Shimano American
Corporation is dedicated to the performance and durability
of our products. To this end, we constantly strive to provide
the best in customer service and product support this
industry has to offer.
For technical assistance or product support information,
please contact us any time through our website at
www.shimano.com or call us direct at 1-877-577-0600
Monday-Friday from 6:00 A.M.–5:00 P.M. Pacific
Standard Time.
Reel Maintenance Workshops
This year, be sure to visit the “Shimano World Booth” at a
fishing show near you and attend our Reel Maintenance
Workshops. At select shows, Shimano technicians will
provide hands-on, step-by-step instructions on how to
perform a complete “clean and service” on your reel. Tools
are provided. Bring one of your functioning Shimano reels,
or simply stop by and listen in.
To obtain a schedule of workshop times and locations,
please visit our website at www.shimano.com.
Platinum Service Program
When you submit the Warranty Registration Card for the
Torsa™, Calcutta TE® DC, Calcutta TE®, Calais® or Stella®
reels, you will receive coupons for discounted clean and
lube services ranging from half off to free! All Platinum
Service Plan reels are assured a 48 hour turnaround
time from Shimano or any Authorized Warranty Center;
shipping excluded.
*Satellite and Warranty Centers are subject to change
without notice. Please call in advance of shipping or
visit our website for the most up-to-date listings.
Satellite Service Center*
The Next Generation in Service™
®
Shimano Satellite Service Centers represent the next
generation in service. They are designed and equipped
to operate as an extension of Shimano’s factory service
department and to make the same service related
decisions that Shimano does. Even in the heat of the
fishing season, Satellite Service Centers commit to
providing warranty and non-warranty repair work quickly
and with the quality Shimano customers deserve.
Electronically linked to Shimano, Satellite Service Centers
have a direct line to Shimano certified parts and to the
latest in Shimano technical information. Always ready to
provide exceptional service and repair work,
they are an outstanding choice for your Shimano parts
and repair needs.
Turn-Around Times
• 48 hours on Stella®, Calcutta TE®, Calcutta TE® DC
Calais® and Torsa™ repairs guaranteed.
Other Warranty Center Features
• Delivery on Shimano’s service philosophy
• Factory trained technicians
• Large inventory of Shimano parts
• Electronic link to Shimano to ensure instant access to:
• Shimano parts information
• Shimano’s latest technical information
Factory Service
If you desire factory service, our team of professional
technicians are here to help. The Shimano factory service
philosophy is simple: every reel leaves in better condition
than which it arrived. The individual technician will
inspect, diagnose, and return your reels to excellent
working condition as rapidly as possible. Visit our web
site www.shimano.com for shipping address and to
download our Repair Request Form (don’t forget to fill
out the diagnostic help section).
All other repair times are seasonal dependent and fluctuate
greatly. Please call our customer service line for current
turnaround times.
150
www.shimano.com
Authorized Warranty Center Locations
United States
Canada
Alabama
Maryland
South Carolina
Canadian Warranty Centers do not participate in the programs
Mark’s Outdoor Sports*
Kel’s Rod & Reel Repair*
Reel Perfection
Haddrell’s Point Tackle*
stated above. Their rules and restrictions may be different.
1400-B Montgomery Hwy.
430 Hwy 436 #105
(c/o The Fishin’ Shop)
885 Ben Sawyer Blvd.
Please contact them for turn-around times. For more information
Birmingham, AL 35216
Casselberry, FL 32707
9026-C Pulaski Hwy.
Mt. Pleasant, SC 29464
contact Shimano Canada LTD at (705) 745-3232. Thank you.
(205) 822-2010
(407) 834-3008
Baltimore, MD 21220
(843) 881-3644
www.marksoutdoors.com
www.kelsrodreel.com
(410) 780-3500
www.haddrellspoint.com
Alaska
Lott Brothers, Inc.*
[email protected]
Tackle Repair Center
631 North Lake Bl.
5011 Arctic Blvd., Ste. E.
Alberta
Manitoba & Saskatchewan
Roggie’s Rod & Reel
Jaycee’s Rod & Reel Repair
Texas
943 Canford Cres. SW
547 Vaughan Avenue
Massachusetts
Fishing Tackle Unlimited*
Calgary, Alberta T2W 1L4
Selkirk, Manitoba R1A 0T2
N. Palm Beach, FL 33408
Buckos Parts & Service*
12800 Gulf Freeway
(403) 281-1434 tel
(204) 482-7477 tel
Anchorage, AK 99503
(561) 844-0244
191 Stafford Rd.
Houston, TX 77034
(403) 281-1434 fax
(204) 785-8255 fax
(907) 561-0444
www.lottbros.com
Fall River, MA 02721
(281) 481-6838
[email protected]
Ontario
(508) 674-7900
www.fishingtackleunlimited.com
www.buckosparts.com
[email protected]
British Columbia, Yukon,
Northwest Territories &
Nunavut
California
Fisherman’s Landing
Georgia
Tackle Shop
Nutter Rod & Reel Service*
[email protected]
Fishing Tackle Unlimited*
2838 Garrison St.
3383 Hwy. 411 NE
Missouri
(Katy Freeway Location)
San Diego, CA 92106
White, GA 30184
Paul’s Bait & Tackle
8933 Katy Freeway
(619) 221-8506
(770) 386-3978
4421 Chippewa St.
Houston, TX 77024
www.saltwatertackle.com
[email protected]
St. Louis, MO 63116
(281) 481-6838
(314) 773-6221
www.fishingtackleunlimited.com
[email protected]
Hawaii
[email protected]
Fisherman’s Warehouse*
Roy’s Fishing Supplies*
Outdoor World Rod & Reel*
9035 Folsom Blvd.
98-025 Hekaha St. #12
2300 E. Turner, Suite M
Roy’s Bait & Tackle*
Sacramento, CA 95826
Aiea, HI 96701-4901
Springfield, MO 65803
7613 South Padre Island Dr.
(916) 362-1259
(808) 487-7690
(417) 873-5274
Corpus Christi, TX 78412
[email protected]
[email protected]
[email protected]
(361) 992-2960
Hi’s Tackle Box
S. Tokunaga Store*
New Jersey
www.roysbait-tackle.com
Natural High Sports Ltd.
1952 Kingsway Ave, Suite 406
Port Coquitlam, British
Columbia V3C 6C2
Service Shiman-Au-Pêche Inc.
9490 Trans Canadienne
St. Laurent, Quebec H4S 1R7
Hilo, HI 96720
69 US Hwy. Rt. 130
Southwestern Parts & Service*
(808) 935-6965
Bordentown, NJ 08505
605 W. Mockingbird Lane
Eric’s Reel Shop**
www.histacklebox.com
www.stokunagastore.com
(609) 298-5300
Dallas, TX 75247
16 Osborne Avenue
[email protected]
[email protected]
www.sportsmenscenter.com
(214) 630-8161
Dartmouth, Nova Scotia
[email protected]
www.fishingreelrepair.com
B2W 1H8
[email protected]
(902) 463-8758 tel
9917 Orr & Day Rd.
Glenn’s Rod & Reel
New York
Santa Fe Springs, CA 90670
2210 E. 9th Street
Sea Isle Custom Rod Builders*
Virginia
Reel Outfitters
Des Moines, IA. 50316
495 Guy Lombardo Ave.
Queens Creek Outfitters
[email protected]
(515) 262-2990
Freeport, NY 11520
Intersection Rts. 3 & 198
c/o Joe Thompson
[email protected]
(516) 868-8855
Cobbs Creek, VA 23035
27 Taylor Lake Road
www.seaisle-tackle.com
(804) 725-3889
Willow Grove, New Brunswick
[email protected]
www.queenscreek.com
E2S 1P6
North Carolina
Washington
The Reel Doctor
100 NE 11th Street
4155 Bardstown Rd.
Miami, FL 33132
Louisville, KY 40218
Coastline Service*
John's Sporting Goods
(305) 374-4661
(502) 499-7770
706-A N. William St.
1913 Broadway
Goldsboro, NC 27530
Everett, WA 98201
(425) 259-3056
www.captharry.com
Louisiana
Dave’s Parts & Service*
Professional Sport Shop*
(919) 736-3859
1500 U.S. Hwy. 19
920 Julia St.
Oregon
Holiday, FL 34691
New Orleans, LA 70113
Ollie Damon*
Virgin Islands
(727) 942-8944
(504) 522-3771
236 SE Grand Ave.
Neptune Fishing Supply*
www.fishingreelparts.com
[email protected]
Portland, OR 97214
6100 Red Hook Quarters #7
Lake Charles Tackle
(503) 232-3193
Saint Thomas, VI 00802
Half Hitch Tackle*
310 West McNeese
www.olliedamons.com
(340) 775-0115
2206 Thomas Dr.
Lake Charles, LA 70605
[email protected]
[email protected]
Panama City, FL 32408
(337) 479-2999
Pennsylvania
(888) 668-9810
[email protected]
Tackle Unlimited*
[email protected]
(905) 277-3595 tel
(905) 277-0088 fax
(902) 463-1773 fax
(562) 864-2911
Kentucky
Mississauga, Ontario L5B 1S4
(514) 956-0181 fax
(415) 221-3825
Supply
3010 Novar Road
(514) 956-9695 tel
San Francisco, CA 94121
Captain Harry’s Fishing
(705) 741-2718 fax
& Repair
Quebec & Maritimes
Maritimes (New Brunswick,
Nova Scotia, PEI &
Newfoundland)
Florida
(705) 741-0636 tel
A.Aikman Sporting Goods
Sportsman’s Center*
Iowa
Peterborough, Ontario K9J 7M1
(604) 464-9301 fax
26 Hoku Street
Sav-On Tackle*
655 The Queensway, Unit #9
(604) 464-9344 tel
3141 Clement St.
[email protected]
Classic Sports of Canada Inc.
(506) 696-7694
www.johnssportinggoods.com
www.halfhitch.com
2200 Route 51
[email protected]
Jefferson Hills, PA 15025
(412) 384-4500
www.tackleunlimitedrepair.com
[email protected]
www.shimano.com
*Indicates a Satellite Service Center Locations only
**reels only (pertains to Canada only)
151
Shimano Website
®
Our dedication to customers and to providing exceptional
service continues. As such, we commit to find better ways
to better serve you. We know that more and more of our
customers are looking to the Internet to find the information needed to make educated buying decisions. If you
have ideas on how to improve our site please go online and
send us an email. We’ll be glad to hear from you.
For Shimano product information, dealer locations, to
search out a Shimano Warranty Center, download a
schematic or find the answer to a technical question, 24
hours a day and 7 days a week, visit our Website at
www.shimano.com. You’ll find all that and more such as
reel diagrams, new product releases, the latest promotions
and year-round event information.
Credits
Photography by Bruce Hyer and Randy Wilkinson
Designed and produced by:
Adventure Advertising, LLC
www.adventureadv.com
Trademarks:
®
Septon is a registered trademark of Kuraray Co., Ltd.
Permalube
®
is a registered trademark of Amoco Oil Company, Corporation.
© Shimano American Corporation and Shimano, Inc. All rights reserved. All
marks are trademarks or registered trademarks of Shimano American
Corporation, Shimano, Inc. or the manufacturers or marketers of products
with which the marks are associated. Specifications and MSRP subject to
change. Printed in the U.S.A.
™ Marks indicate United States non-registered trademarks of Shimano
American Corporation or Shimano, Inc., as of June 2005.
® marks indicate United States registered trademarks of Shimano American
Corporation or Shimano, Inc., or the manufacturers or marketers of products
with which the marks are associated as of June, 2005.
152
www.shimano.com
“
With over 100 days a year on the water, I put
tackle to the ultimate test. After nearly 30
years of charter fishing, I demand nothing less
than Shimano for its superior quality to perform under the most intense circumstances.
— Myron Fischer,
Shimano Pro Staff
I can’t deal with losing a fish due to tackle
failure, with Shimano there’s never a problem.
— Darren Haydel,
Shimano Pro Staff
”
www.shimano.com
SHIMAN
OAME
RIC
ANO
R
C PO
RATIO
N
ne Holland
O
Irvine, aClifornia, .US.A. 2
91
68
Phone: 4
-5
9
91-5003
Website: www.shimano.com
SHIMAN
OIN
.
C
3-7
7iOmatsu-cho, Sakai, sOaka 59
0-8
57
, aJ pan
Phone: 1
8-7
2-223-34
7
6
SHIMAN
OA
CA
NDA TLD.
27Pido Road
4
Peterborough, N
O9
JKX
7
6
Phone: 0
75-7
5-3232
4
SHIMAN
OU
R
EP
OEHO
DIN
L
GB.V
.
Industrieweg 24
01
8
7T
Cu
Nnspeet, The eNtherlands
Phone: 31-34
1-27
2222
RE
MM
E BE
R TOIVSIT S
U AT WWW.SHIMAN
.O
O
M
C FO
R:
•u
Or entire product line-up
•The latest press releases about our
products and events
•Warranty and u
Cstomer Service information
•Dealer locator
•Maintenance workshop information
•Shimano
®
clothing and accessories
At Shimano American oCrporation, we are dedicated to creating recreational products that
not only put us in touch with our natural environment, but also create a more natural and
SHIMAN
OS
( IN
APO
G
R)EPTE
. TLD.
20 Benoi Sector
Jurong Town, Singapore 2
68
5
92
Phone: 5
6-6
25
6-4
7
responsive interface between the environment and ourselves.
DU
PHYHO
N
DIN
L
GPTY
. TLD.
nit 1, Block A
U
1-3 n
Edeavour Road
aringbah, S
C
NW 2229Australia
Phone: 1
6-2-9
526
-214
4
• oCmpliance with applicable environmental regulations, codes and standards;
The people who are Shimano American oCrporation believe that the integration of
environmental issues into our business culture will yield superior products. We will
strive to lead by example and are committed to:
• Prevention of pollution and;
• oCntinual improvement in our environmental performance.
It is our intent to be recognized by our customers, employees and community as a
responsible business committed to environmental protection and preservation.
©005 Shimano American C
2
orporation and Shimano, Inc. All rights reserved. All marks are trademarks or registered trademarks of Shimano American C
orporation, Shimano, Inc. or the manufacturers or marketers of products with which the marks are associated. Specifications and MSRP subject to change. Printed in the U
.S.A.

2006 reel catalog

Transcription

Similar documents

Review of No 278 Fly Reel by Magnus Angus

Bags : 12" LAYFLAT VEXAR SPOOL

Bags : 14" LAY FLAT VEXAR SPOOL

Cardinal CD-6 3000 service

From the Flybridge - 6 September, 2015.pages

2009 drag specialties fatbook catalog. - Customs

u au sa ace as - HoustonLGBTHistory.org

Torsa C1-C4 - CGK Shimano

Shimano calcutta 250A rebuild

Fishing Noosa