Micromar. Micrometer
Transcription
Micromar. Micrometer
Micromar. Micrometers 3- 2 Micromar. Micrometer overview Micromar - Design Features Carbide tipped measuring faces Barrel scale Spindle Thimble Reading example: Reference lines (sleeve) Micrometer with 0.01 mm-divisions Ratchet 0 Anvil 30 25 Frame Sleeve2.5 Thimble0.28 Locking device Measuring result 2.78 mm Heat insulated handle Micromar - Types of Micrometers Mahr - Micrometers are available with the following means of indication: a) Digital Micrometer with digital display b) Mechanical Micrometer with scale and dial c) Mechanical Micrometer with scale Error limits G according to DIN 863-1 Measuring range mm Error limit G µm Measuring force N 0 25 50 75 - 25 50 75 100 4 4 5 5 5 - 10 5 - 10 5 - 10 5 - 10 100 125 150 175 - 125 150 175 200 6 6 7 7 5 - 10 5 - 10 5 - 10 5 - 10 200 225 250 275 - 225 250 275 300 8 8 9 9 5 - 10 5 - 10 5 - 10 5 - 10 300 325 350 375 - 325 350 375 400 10 10 11 11 5 - 10 5 - 10 5 - 10 5 - 10 400 425 450 475 - 425 450 475 500 12 12 13 13 5 - 10 5 - 10 5 - 10 5 - 10 + Micromar. Micrometers 3- 3 Micromar - Variations a) Micrometer b) Micrometer for inside dimensions IP65 IP52 c) Micrometer for depth measurement d) Micrometer Head Function keys of Digital Micrometers Functions Type 40 EWR 40 EWS 40 EWV 40 ER 44 EWR 46 EWR PR Enter a numerical value (Reference Setting) mm/in Switch between mm/inch 0/ABS Set display to either 0.000 mm or .0000“ for relative measurement / set to a reference or preset value (PR) DATA Data transmission ABS Digimatic RS232C *For digital micrometers with a data output * * * DATA 3- 4 Micromar. Micrometers Micromar. Digital Micrometer Micromar 40 EWR WAtERproof micrometers Wi th th e digita l wat er p ro o f Mi c ro m et e r M i crom a r 4 0 E W R , p re c is e a n d re lia b le res u l t s a re o b ta i n ed even in t he m ost d i f f i c ul t c o nd i t io n s . The high-contrast display with 8.5 mm high digits enables accurate, fatigue free reading of the measurement results. Absolute-Function: Micrometer can be set in ABS any position to 0.000 mm / .0000“ without the reference to the Preset value being lost The Reference-LockFunction prevents operating error caused by accidental usage of the operating buttons. Stainless steel, hardened spindle Universal SPC-interface (optional). You have a choice of MarConnect data outputs, select either USB, Digimatic or Mahr Opto RS232 The ergonomically formed and thermally insulated handle as well as the integrated ratchet in the thimble ensures both trouble free handling and accurate measurement results. Sturdy hard lacquered steel frame The new Reference system is extremely energy efficient as when the caliper is in standby mode; almost no power is required, thus extending the life of the battery to up to 50%. - System + 50% Conventional 1 Year 2 Years 3 Years IP65 Code Initial IP International Protection First Numeral 6 Dust-tight Second Numeral 5 Protected against powerful water jets Protection class IP65 in accordance to IEC 60529, the water proof measuring system FPS (Fluid Protected measuring System) with a sealed housing. + Micromar. Micrometers 3- 5 Digital Micrometer Micromar 40 EWR with data output IP65 ABS Features Functions: RESET (Zero setting the display for Relative measurement) ABS (Switch between Relative and Absolute measurement) mm/inch Reference-Lock/Unlock PRESET (Reference setting) •High contrast Liquid Crystal Display with 8.5 mm high digits •Hard lacquered steel frame, heat insulated •Spindle and anvil are carbide tipped •Spindle is made of stainless steel, hardened throughout and ground DATA (Data transmission via connection cable) •Immediate measurement due to the Reference system •MarConnect data output, choose alternatively USB OPTO RS232C Digimatic •Ratchet is integrated in the thimble •Rapid drive • Supplied with: Case, battery, operating instructions and setting standard (from measuring range 25-50 mm / 1-2") Technical Data Measuring range mm 0 25 50 75 100 125 150 175 40 EWR 40 EWR 40 EWR 40 EWR 40 EWR 40 EWR 40 EWR 40 EWR - 25 50 75 100 125 150 175 200 Resolution Error limit G * (inch) mm / inch µm Spindle thread pitch mm (0 - 1”) (1 - 2”) (2 - 3”) (3 - 4”) (4 - 5“) (5 - 6“) (6 - 7“) (7 - 8“) 0.001 /.00005” 0.001 /.00005” 0.001 /.00005” 0.001 /.00005” 0.001 /.00005” 0.001 /.00005” 0.001 /.00005” 0.001 /.00005” 2 2 3 3 5 5 6 6 0.635 0.635 0.635 0.635 0.635 0.635 0.635 0.635 Data output Order no. 4151705 4151706 4151707 4151708 4151740 4151741 4151742 4151743 * at fixed zero point (better than DIN 863-1) Accessories Dimensions mm 0 25 50 75 100 125 150 175 a - 25 mm 50 mm 75 mm 100 mm 125 mm 150 mm 175 mm 200 mm / 0-1” / 1-2” / 2-3” / 3-4” / 4-5“ / 5-6“ / 6-7“ / 7-8“ 23 32 44 57 73 85 97 110 b c 9.5 11.5 13.5 15.5 17 17 17 17 31.5 57 82 107 132.5 157.5 182.5 207.5 Order no. Battery 3V, type CR 2032 Data Connection Cable USB (2 m) Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin Data Connection Cable Digimatic (2 m), Flat plug 10-pin 16 EXu 4102520 4102357 16 EXr 4102410 16 EWd Accessories for Data Processing see Chapter 11 4102915 3- 6 Micromar. Micrometers Digital Micrometer Micromar 40 EWR without data output ABS IP65 Features Functions: RESET (Zero setting the display for Relative measurement) ABS (Switch between Relative and Absolute measurement) mm/inch Reference-Lock/Unlock PRESET (Reference setting) •Immediate measurement due to the Reference system •Spindle and anvil are carbide tipped •High contrast Liquid Crystal Display with 8.5 mm high digits •Spindle is made of stainless steel, hardened throughout and ground •Hard lacquered steel frame, heat insulated •Ratchet is integrated in the thimble •Rapid drive • Supplied with: Case, battery, operating instructions Technical Data Measuring range mm 0 - 40 EWR Resolution Error limit G * mm / inch 0.001 /.00005” (inch) 25 (0 - 1”) Data output µm Spindle thread pitch mm 2 0.635 — Order no. 4151721 * at fixed zero point (better than DIN 863-1) Accessories Dimensions mm 0 - 25 mm / 0-1” a b c 23 9.5 31.5 Order no. Battery 3V, type CR 2032 4102520 + Micromar. Micrometers 3- 7 Digital Micrometer Set Micromar 40 EWR IP65 ABS Features Functions: RESET (Zero setting the display for Relative measurement) ABS (Switch between Relative and Absolute measurement) mm/inch Reference-Lock/Unlock PRESET (Reference setting) DATA (Data transmission via connection cable) •Immediate measurement due to the Reference system •MarConnect data output, choose alternatively USB OPTO RS232C Digimatic •Ratchet is integrated in the thimble •Rapid drive •High contrast Liquid Crystal Display with 8.5 mm high digits •Hard lacquered steel frame, heat insulated •Spindle and anvil are carbide tipped •Spindle is made of stainless steel, hardened throughout and ground • Supplied with: Custom fitted plastic case, battery, operating instructions and standards 25 mm, 50 mm and 75 mm Technical Data Measuring range mm 40 EWR 0 - 100 Resolution (inch) mm / inch Spindle thread pitch mm (0 - 4”) 0.001 /.00005” 0.635 Number of Micrometers Order no. 4 4151709 Accessories Order no. Battery 3V, type CR 2032 Data Connection Cable USB (2 m) Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin Data Connection Cable Digimatic (2 m), Flat plug 10-pin 16 EXu 4102520 4102357 16 EXr 4102410 16 EWd Accessories for Data Processing see Chapter 11 4102915 Micromar. Micrometers 3- 8 Digital Micrometer Micromar 40 ER without data output ABS IP40 Features Functions: RESET (Zero setting the display for Relative measurement) ABS (Switch between Relative and Absolute measurement) mm/inch Reference-Lock/Unlock PRESET (Reference setting) •Immediate measurement due to the Reference system •High contrast Liquid Crystal Display with 8.5 mm high digits •Hard lacquered steel frame, heat insulated •Spindle and anvil are carbide tipped •Spindle is made of stainless steel, hardened throughout and ground •Ratchet is integrated in the thimble •Rapid drive • Supplied with: Case, battery and operating instructions Technical Data Measuring range mm 40 ER 0 - 25 Resolution Error limit G * Order no. µm Spindle thread pitch mm (inch) mm / inch (0-1”) 0.001 /.00005” 2 0.635 4151601 * at fixed zero point (better than DIN 863-1) 118 23 4 ø20,9 ø6,5 31,7 10 4 Accessories Order no. Battery 3V, type CR 2032 4102520 + Micromar. Micrometers 3- 9 Digital Micrometer Micromar 40 EWS with sliding spindle ABS IP52 Features Functions: RESET (Zero setting the display for Relative measurement) ABS (Switch between Relative and Absolute measurement) mm/inch Reference-Lock/Unlock PRESET (Reference setting) •High contrast Liquid Crystal Display with 8.5 mm high digits •Hard lacquered steel frame, heat insulated •Spindle and anvil are carbide tipped •Spindle is made of stainless steel, hardened throughout and ground •Immediate measurement due to the Reference system •MarConnect data output, choose alternatively USB OPTO RS232C Digimatic •Ratchet is integrated in the thimble •Rapid drive • Supplied with: Case, battery and operating instructions Technical Data mm 40 EWS 0 - 25 Resolution Error limit G Order no. µm Spindle thread pitch mm (inch) mm / inch (0-1”) 0.001 /.00005” 4 0.635 4151724 4 23 Accessories Order no. Battery 3V, type CR 2032 Data Connection Cable USB (2 m) 16 EXu Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr Data Connection Cable Digimatic (2 m), Flat plug 10-pin 16 EWd Accessories for Data Processing see Chapter 11 4102520 4102357 4102410 4102915 118 ø6,5 31,7 10 4 ø20,9 Measuring range 3- 1 0 Micromar. Micrometers Universal Digital Micrometer Micromar 40 EWV with sliding spindle ABS IP52 Features Functions: RESET (Zero setting the display for Relative measurement) ABS (Switch between Relative and Absolute measurement) mm/inch Reference-Lock/Unlock PRESET (Reference setting) •Immediate measurement due to the Reference system •MarConnect data output, choose alternatively USB OPTO RS232C Digimatic •High contrast Liquid Crystal Display with 8.5 mm high digits •Hard lacquered steel frame, heat insulated •Mounting bore for inter changeable anvils •Spindle is made of stainless steel, hardened throughout and ground •Ratchet is integrated in the thimble •Rapid drive • Supplied with: Case, battery and operating instructions Technical Data Measuring range* mm 0 0 - Resolution 25 25 mm / inch Error limit** G µm Spindle thread pitch mm Spindle dia. mm 0.001 /.00005” 0.001 /.00005” 4 4 0.635 0.635 6.5 6.5 Order no. without standard accessories Order no. with standard accessories 4151722 4151723 * with thread anvils the measuring range is reduced **with flat anvils over the full length of the anvils ø20,9 Special Accessories 23 4 118 ø6,5 31,7 10 4 Order no. Battery 3V, type CR 2032 Data Connection Cable USB (2 m) Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin Data Connection Cable Digimatic (2 m), Flat plug 10-pin 16 EXu 4102520 4102357 16 EXr 4102410 16 EWd 4102915 Accessories for Data Processing see Chapter 11 + Micromar. Micrometers 3- 1 1 Standard Accessories are included in the set Order no. Quantity required 40 Efl Flat anvils (sensitive) 4151761 1 40 Eak Anvils with reduced measuring faces (reference) 4151777 1 40 Eal Anvils with reduced measuring faces (sensitive) 4151767 1 40 Etk Disc type anvils (reference) d = 11.3 mm 4151772 1 40 Etl Disc type anvils (sensitive) d = 11.3 mm 40 Erk Anvils with spherical measuring faces 15,5 6 40 Efk 2,8 2,8 6 2,3 2,3 6 3,5 11,3 11,3 15,5 3,5 40 Etk 2,8 4151762 40 Eal 3,5 2 7 7 15,5 2 40 Eak 40 Efl 3,5 1 6,5 4151771 6,5 Flat anvils (reference) 3,5 40 Efk 3,5 Catalog no. Description 40 Etl 2,8 1 6 3,5 40 Erk 2 7 4151774 R5 2,8 6 3,5 7 3,5 60 0,3 40 Epk 2 3;5 4151773 Conical shaped anvil 7 40 Epk 40 Esk 0,75 6 1,8 2,8 40 Esk 2 7 4151775 3,5 Wedge shaped anvil (blade) 7 40 Esk 0,75 6 1,8 7 Special Accessories Catalog no. Description Order no. Quantity required 3,5 60 2 0,3 4151776 3;5 40 Ekk 40 Ekk 7 6 Wedge shaped anvil (blade) 60° Thread anvils for pitch diameters* • Pair consists of 1 V-anvil and 1 blade anvil 2,8 * with thread anvils the measuring range is reduced to 20 mm Metric thread (60°) 0.5 0.7 1.25 2 Whitworth thread (55°) Pitch V-anvil Blade mm Order no. Order no. 4501000 4501001 4501002 4501003 4173700 4173701 4173702 4173703 - 0.7 1 2 3.5 Pitch range TPI 40 32 24 18 14 10 - 32 24 18 14 10 7 American UST thread (60°) V-anvil Blade Order no. Order no. 4501007 4501008 4501009 4501010 4501011 4501012 4173743 4173744 4173745 4173746 4173747 4173748 Pitch range TPI 40 32 24 18 14 10 - V-anvil 32 24 18 14 10 7 Blade Order no. Order no. 4501018 4501019 4501020 4501021 4501022 4501023 4173815 4173816 4173817 4173818 4173819 4173820 3- 1 2 Micromar. Micrometers Micrometer Micromar 40 A Features •Hard lacquered steel frame •Spindle and anvil made of hardened steel, carbide tipped •Scales with satin-chrome finish •Heat insulators •Rapid drive with integrated ratchet •Locking device •Supplied with: Case, setting standard (from measuring range 25-50 mm / 1-2“), operating instructions Technical Data Measuring range Metric 0 25 50 75 100 125 150 175 - 25 mm 50 mm 75 mm 100 mm 125 mm 150 mm 175 mm 200 mm - 1” 2” 3” 4” 5” 6” 7” 8” Readings Error limit G Spindle thread pitch Order no. 0.01 mm 0.01 mm 0.01 mm 0.01 mm 0.01 mm 0.01 mm 0.01 mm 0.01 mm 4 µm 4 µm 5 µm 5 µm 6 µm 6 µm 7 µm 7 µm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 4134000 4134001 4134002 4134003 4134004 4134005 4134006 4134007 .0001” .0001” .0001” .0001” .0001” .0001” .0001” .0001” .00016” .00016” .00020” .00020” .00024” .00024” .00028” .00028” .025” .025” .025” .025” .025” .025” .025” .025” 4134900 4134901 4134902 4134903 4134904 4134905 4134906 4134907 Inch 0 1 2 3 4 5 6 7 + Micromar. Micrometers 3- 1 3 Technical Data Dimensions Measuring range mm inch * when scale is set at 0 0 25 50 75 100 125 150 175 - 25 50 75 100 125 150 175 200 0 1 2 3 4 5 6 7 - 1” 2” 3” 4” 5” 6” 7” 8” a mm b mm c mm 31 56 81 106 131 156 182 207 25.5 34.5 47.5 58.5 71.5 83.5 95.5 108.5 7 12 12 13 13 13 13 13 Accessories Stand, setting standards, etc. please refer to page 3-24 Micrometer Sets Micromar 40 SA Application range Order no. Remarks 0 - 100 mm (4 Micrometers) 4134050 Incl. wooden case, setting standards 25 mm and 75 mm 100 - 200 mm (4 Micrometers) 4134051 Incl. wooden case, setting standards 125 mm and 175 mm 0 - 4“ (4 Micrometers) 4134960 Incl. wooden case, setting standards 1” and 3” 4 - 8“ (4 Micrometers) 4134961 Incl. wooden case, setting standards 5“ and 7” 3- 1 4 Micromar. Micrometers Micrometer Micromar 40 AG Features •Hard lacquered steel frame •Spindle and anvil made of hardened steel, carbide tipped •Scales with satin-chrome finish •Heat insulators •Ratchet is integrated in the thimble •Locking device •Supplied with: Case, setting standard Note: All Micrometers with measuring ranges between 400 mm to 500 mm, the frame is made from a steel tube Technical Data 200 225 250 275 300 325 350 375 400 425 450 475 - 225 250 275 300 325 350 375 400 425 450 475 500 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 8 8 9 9 10 10 11 11 12 12 13 13 Dimensions Dimensions in mm a b c d e 200 225 250 275 300 325 350 375 400 425 450 475 - 225 250 275 300 325 350 375 400 425 450 475 500 242.5 267.5 292.5 317.5 342.5 367.5 392.5 417.5 442 467 492 517 121.5 134 146.5 159 171.5 184 196.5 209 223 236 248 259 25 25 25 25 25 25 25 25 25 25 25 25 5 5 5 5 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 12 12 12 12 Weight 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2 2.2 2.3 2.7 3.2 3.4 3.6 4 4.2 4.5 4.9 5 Order no. kg 4134500 4134501 4134502 4134503 4134504 4134505 4134506 4134507 4134508 4134509 4134510 4134511 a c e 98 ø18,7 mm Spindle thread pitch mm ø8 mm Error limit G µm d Readings b Measuring range + Micromar. Micrometers 3- 1 5 Micrometer Micromar 40 W Features •Hard lacquered steel frame •Spindle and anvil made of hardened steel, carbide tipped •Scales with satin-chrome finish •Heat insulators •Ratchet is integrated in the thimble •Exchangeable anvils •Locking device •Supplied with: Case, setting standards Note: All Micrometers with measuring ranges from 400 mm up to 1000 mm, the frame is made from a steel tube Technical Data Measuring range Readings mm mm 0 100 200 300 400 500 600 700 800 900 - 100 200 300 400 500 600 700 800 900 1000 Error limit G µm 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 5 7 9 11 13 21 23 26 28 30 Spindle thread pitch mm Weight 1 1 1 1 1 1 1 1 1 1 1.1 2.1 3.4 5.7 2.6 3.3 4.0 4.4 5.3 6.5 Order no. kg 4137500 4137501 4137502 4137503 4137504 4137505 4137506 4137507 4137508 4137509 a ø8 75 Dimensions - 100 200 300 400 500 600 700 800 900 1000 117.5 217.5 317.5 417.5 517.5 617.5 717.5 817.5 917.5 1017.5 b 59 109 159 209 259 309 360 410 460 510 ø24,5 0 100 200 300 400 500 600 700 800 900 a b Dimensions in mm 98 3- 1 6 Micromar. Micrometers Micrometer with integrated Dial Comparator Micromar 40 F / FC Applications • For rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) • Measurements of thickness and length • Recommended for standard precision parts Features •Measuring spindle made of stainless steel, hardened throughout and ground, lockable •Scales with satin-chrome finish •Constant measuring force •Dial Comparator is integrated in frame •Adjustable tolerance markers •Chrome plated steel frame with heat insulators •Maximum stability •Retraction of the movable anvil and carbide-tipped measuring faces ensures maximum wear resistance •Longer service life due to the ceramic measuring faces (40 FC) •Supplied with: Case Technical Data 9N 9N 4150000 4150001 .04” .04” ≤ .00001” ≤ .00001” ≤ .00005” ≤ .00005” 9N 9N 4150900 4150901 1 mm 1 mm ≤0.2 µm ≤ 0.2 µm ≤1 µm ≤1 µm 9N 9N 4150200 Ceramic measuring faces 4150201 Ceramic measuring faces 0 1 Micrometer Readings Error limit Gme 0,01 mm .0001” e Dial Comparator Spindle thread pitch ≤2 µm 0,5 mm ≤ .00008” .025” Error limit Ge (DIN 879) Meas. range Readings 1 µm .00005” ±65 µm ±.0025” 1 µm .00005” 5 a d 0 - 25 mm 25 - 50 mm ø17,5 40 FC Order no. Remarks ≤1 µm ≤1 µm 1 mm 1 mm 1” 2” Measuring force ≤0.2 µm ≤0.2 µm 0 - 25 mm 25 - 50 mm - Measuring faces Flatness Parallelism ø7,5 40 F Retraction c Measuring range Mahr 40 F/FC b Dimensions Dimensions in mm Accessories Stand, setting standards, etc. please refer to page 3-24 40 F/FC 0-25 mm (0-1”) 25-50 mm (1-2”) * in zero position a* b c d e 149 174 100 125 16 30 71 85 32 56 + Micromar. Micrometers 3- 1 7 Micrometer with Dial Comparator Micromar 40 T Applications • For rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) • Measurements of thickness and length • Recommended for standard precision parts Features •Rugged steel frame, heat insulated and chrome plated (up to measuring range 100 - 150 mm) •Maximum stability •Retraction of the movable anvil and carbide-tipped measuring faces ensures maximum wear resistance •Heat insulators •Measuring spindle made of stainless steel, hardened throughout and ground, lockable •Scales with satin-chrome finish •Constant measuring force •Supplied with: Dial Comparator 1003, wooden case Technical Data Measuring range - 25 mm 50 mm 100 mm 150 mm 200 mm 0.01 mm ≤2 µm ≤0.2 µm ≤0.2 µm ≤0.2 µm ≤0.2 µm ≤0.2 µm 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm Micrometer Measuring force ≤2 µm ≤2 µm ≤2 µm ≤2 µm ≤2 µm Order no.* 6.5 N 6.5 N 6.5 N 7.5 N 7.5 N 4154000 4154001 4154002 4154003 4154004 Dial Comparator* Spindle thread pitch Error limit Ge (DIN 879) Meas. range 0.5 mm 1 µm ±50 µm Readings a d e Readings Error limit Gme Measuring faces Flatness Parallelism 1 µm c 67 7,5 0 25 50 100 150 Retraction Dimensions in mm 0 25 50 100 150 - 25 50 100 150 200 b Dimensions a** b c d** e 27 52 76 127 177 28 40 65 87 112 4 4 5.5 5.5 5.5 11 11 30 30 30 8 8 8 8 8 * Alternative indicating instruments are available on request ** in zero position Accessories Stand, setting standards, etc. please refer to page 3-24 ø17,5 40 T Mahr Indicating Snap Gage 840 F see page 9-8 3- 1 8 Micromar. Micrometers Precision Bench Micrometer Micromar 40 TS Applications • For rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) • Measurements of thickness and length • Recommended for standard precision parts Features •Rugged steel frame, can be tilted up to 45° in relation to the sturdy base •Retraction of the movable anvil and carbide-tipped measuring faces ensures maximum wear resistance •Height-adjustable stop •Constant measuring force •Measuring spindle made of stainless steel, hardened throughout and ground, lockable •Scales with satin-chrome finish •Supplied with: Dial Comparator 1003 Technical Data 0 0 - 50 mm 2“ Retraction 1.2 mm .045“ Measuring faces Flatness Parallelism ≤0.2 µm ≤ .00001“ Measuring force Order no.* 6.5 N 6.5 N 4154030 4154930 ≤2 µm ≤ .00008“ 4154035 4154035 ø25 * Alternative indicating instruments are available on request Order no. wooden case ø7,5 5,5 0,005mm Measuring range 29 101 26x15 87,5 Mahr 40 TS 140 x 80 Micrometer Readings Error limit Gme Dial Comparator 1003/1003Z Spindle thread pitch 0.01 mm ≤2 µm 0.5 mm .0001” ≤ .00008” .025” Error limit Ge (DIN 879) Meas. range Readings 1 µm .00005” ±50 µm ±.002” 1 µm .00005” Accessories Stand, setting standards, etc. please refer to page 3-24 Indicating Thread Snap Gage 852 TS see page 9-19 + Micromar. Micrometers 3- 1 9 Micrometer Micromar 40 AB with reduced measuring faces Features •Locking device •For measuring recesses, grooves, etc. •Hard lacquered steel frame •Spindle and anvil made of hardened steel, carbide tipped •Scales with satin-chrome finish •Heat insulators •Rapid drive with integrated ratchet •Supplied with: Case, setting standard (from measuring range 25 - 50 mm / 1 - 2“), operating instruction Technical Data 80* a 0 25 50 75 0.01 mm 0.01 mm 0.01 mm 0.01 mm 4 µm 4 µm 5 µm 5 µm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 4134100 4134101 4134102 4134103 .0001” .0001” .0001” .0001” .00016” .00016” .00020” .00020” .025” .025” .025” .025” 4134920 4134921 4134922 4134923 c 18,5 8,5 0 0 1 2 3 - 1” 2” 3” 4” 10 1 5 0 45 b - 25 mm - 50 mm - 75 mm - 100 mm 5 ø17,5 Spindle Order no. thread pitch ø6,5 Error limit G ø3 Readings 4 Measuring range 40 AB * when scale is set at 0 Mahr Dimensions in mm 0 25 mm / 0-1“ 25 50 mm / 1-2“ 50 75 mm / 2-3“ 75 - 100 mm / 3-4“ a 56 81 106 131 b 34.5 47.5 58.5 71.5 c 12 12 13 13 Micrometer Micromar 40 AS with sliding spindle and measuring spades Features •Rapid drive with integrated ratchet •For measuring narrow recesses, grooves, etc. •Hard lacquered steel frame •Spindle and anvil made of hardened steel •Scales with satin-chrome finish •Heat insulators •Supplied with: Case, setting standard (from measuring range 25 - 50 mm / 1 - 2“), operating instructions Technical Data 80* a 25 mm 50 mm 75 mm 100 mm 0.01 mm 0.01 mm 0.01 mm 0.01 mm 4 µm 4 µm 5 µm 5 µm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 4134200 4134201 4134202 4134203 0 1 2 3 - 1” 2” 3” 4” .0001” .0001” .0001” .0001” .00016” .00016” .00020” .00020” .025” .025” .025” .025” 4134930 4134931 4134932 4134933 0 5 10 1 5 0 45 ø17,5 - 15 ø8 0 25 50 75 c ø6 Spindle Order no. thread pitch 40 AS Mahr 7 0,8 Error limit G 4 Readings b Measuring range * when scale is set at 0 Dimensions in mm 0 25 mm / 0-1“ 25 50 mm / 1-2“ 50 75 mm / 2-3“ 75 - 100 mm / 3-4“ a 56 81 106 131 b 34.5 47.5 58.5 71.5 c 12 12 13 13 3- 2 0 Micromar. Micrometers Micrometer Micromar 40 AR with spherical anvil Features •For measuring the wall thickness of a pipe, etc. •Hard lacquered steel frame •Spindle and anvil made of hardened steel, carbide tipped •Scales with satin-chrome finish •Heat insulators •Rapid drive with integrated ratchet •Locking device •Supplied with: Case, setting standard (measuring range for 25 - 50 mm / 1 - 2“), operating instructions Technical Data 1” 2” .0001” .0001” 4 µm 4 µm 0.5 mm 0.5 mm 4134250 4134251 .00016” .00016” .025” .025” 4134940 4134941 a 80* c >ø12 4 R6 0 5 10 5 15 0 45 ø17,5 - 25 mm 0.01 mm 50 mm 0.01 mm Spindle Order no. thread pitch ø6,5 0 1 Error limit G 4 0 25 - Readings b Measuring range 40 AR Dimensions in mm 0 25 - 25 mm / 0-1“ 50 mm / 1-2“ a b c 31 56 25.5 34.5 7 12 Mahr * when scale is set at 0 Micrometer Micromar 40 AW with sliding spindle and disc-type anvils Features •For measuring soft materials such as felt, rubber, cardboard, etc. •Hard lacquered steel frame •Spindle and anvil made of hardened steel •Scales with satin-chrome finish •Heat insulators •Rapid drive with integrated ratchet •Supplied with: Case, operating instructions Technical Data Measuring Readings Error Parallelism Flatness Spindle Order no. range limit thread pitch G 2 µm 0.5 mm 4134300 .0001” .0003” .0002” .001” .025” 4134950 31 12 80* 3,5 0 5 10 1 5 0 45 ø17,5 5 µm ø15 8 µm 4 0 - 1” 0.01 mm 25,5 0 - 25 mm 40 AW Mahr * when scale is set at 0 + Micromar. Micrometers 3- 2 1 Precision Micrometer Micromar 40 SM with disc-type anvils Applications For measurements of • Tooth spans Wk as of module 0.8 as indirect determination of tooth thickness on spur gears with straight and helical teeth • Shoulders on shafts • Undercut dimensions • Registers • Soft materials such as rubber, cardboard, felt, etc. Wk Features •Hard lacquered steel frame •Maximum stability •Spindle is hardened throughout and ground •Disc-type anvils are hardened and lapped •Scale have a satin chrome finish •Heat insulators •Rapid drive with integrated ratchet •Locking device •Supplied with: Case Technical Data Measuring range mm 0 25 50 75 100 125 150 175 - Readings 25 50 75 100 125 150 175 200 mm Error limit G µm Spindle thread pitch mm 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 4 4 5 5 6 6 7 7 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Measuring faces Flatness Parallelism µm µm ≤ 0.6 ≤ 0.6 ≤ 0.6 ≤ 0.6 ≤ 0.6 ≤ 0.6 ≤ 0.6 ≤ 0.6 ≤4 ≤4 ≤4 ≤4 ≤5 ≤5 ≤5 ≤5 Order no. 4134600 4134601 4134602 4134603 4134604 4134605 4134606 4134607 Dimensions Dimensions in mm 0 25 50 75 100 125 150 175 - 25 50 75 100 125 150 175 200 a 45 70 95 120 145 170 195 220 b c d e f 30.5 35 48 59.5 71 83 96 108 18.1 18.1 18.1 18.1 18.1 18.1 18.1 18.1 6 6 6 6 6 6 6 6 11 11 11 11 11 11 11 11 25 25 25 25 30 30 30 30 Accessories Stand, setting standards, etc. please refer to page 3-24 * at the start of the measuring range Indicating Snap Gage 840 FM see page 9-14 3- 2 2 Micromar. Micrometers Thread Micrometer Micromar 40 Z Features •For measuring pitch, root and outside diameters •Spindle and anvil both have a mounting bore to accommodate inter changeable anvils •Hard lacquered steel frame, heat insulated •Spindle is hardened throughout, ground and is also provided which a locking device •Adjustable anvil •Flat end surface of the anvil shank rests on a hardened steel ball which is at the bottom of the mounting bore •Scales have a satin-chrome finish •Supplied with: Case Technical Data Measuring range mm 0 25 50 75 100 125 150 175 - Spindle thread pitch mm Mounting bores for anvils mm Order no. mm Error limit Gme µm 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 4 4 5 5 6 6 7 7 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 4170030 4170031 4170032 4170033 4170034 4170035 4170036 4170037 Readings 25* 50 75 100 125 150 175 200 * Setting only with Thread Setting Plug Gages 715 E, when the interchangeable anvils span over several leads. Indicating Thread Snap Gage 852 see page 9-20 b = V-anvil c = Tapered anvil Accessories Setting Standards 43 Z For setting Thread Micrometers 40 Z. With point on one side and a V-groove on the other, both match the pitch angle of thread to be inspected. One setting standard is sufficient for two adjacent frame sizes. 43 Z Length mm 25 50 75 100 125 150 175 200 Accuracy ± µm 4 4.5 4.5 4.5 5 5 5 5.5 Thread angle 60° Order no. Thread angle 55° Order no. 4175000 4175001 4175002 4175003 4175004 4175005 4175006 4175630 4175100 4175101 4175102 4175103 4175104 4175105 4175106 4175636 + Micromar. Micrometers 3- 2 3 Interchangeable Anvils for Thread Micrometer Micromar 40 Z For pitch and outside diameters. Hardened, wear-resistant special steel. With cylindrical mounting shank and retainer ring which ensures locking while permitting rotation in bore of spindle and anvil. For pitch diameters 15,5 Metric thread (60°) 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.7 1.25 2 3.5 5 7 Whitworth thread (55°) Pitch V-anvil mm Order no. Tapered anvil Order no. 4173007 4173008 4173009 4173010 4173011 4173012 4173000 4173001 4173002 4173003 4173004 4173005 4173006 4173407 4173408 4173409 4173410 4173411 4173412 4173400 4173401 4173402 4173403 4173404 4173405 4173406 - 0.7 1 2 3.5 5 7 9 Pitch range TPI 40 32 24 18 14 10 7 4.5 3 - 32 24 18 14 10 7 4.5 3 2.5 V-anvil Order no. Tapered anvil Order no. 4173043 4173044 4173045 4173046 4173047 4173048 4173049 4173050 4179408 4173443 4173444 4173445 4173446 4173447 4173448 4173449 4173450 4179409 ø3,5 Pair consists of V-anvil and tapered anvil. For pitch range 0.2 - 0.45 mm V-anvil covers 3 thread leads, set with a Thread Setting Plug Gage 715 E, as opposed to Setting Standards 43 Z for other applications. American UST thread (60°) Pitch range TPI 60 48 40 32 24 18 14 10 7 4.5 - V-anvil 48 40 32 24 18 14 10 7 4.5 3 For pitch diameters Pair consists of V-anvil and tapered anvil. Shank length 15.5 mm Trapezoid threads according to DIN 103 Pitch V-anvil mm Order no. Tapered anvil Order no. 4173250 4173251 4173252 4173253 4173254 4173255 4173256 4173257 4173258 4173259 4173260 4173261 4173262 4173263 4173264 4173265 4173650 4173651 4173652 4173653 4173654 4173655 4173656 4173657 4173658 4173659 4173660 4173661 4173662 4173663 4173664 4173665 1 1.5 2 3 4 5 6 7 8 9 10 12 14 16 18 20 For outside diameter Made of hardened steel Order no. 4173210 Carbide tipped Order no. 4511190 15,5 ø3,5 with flat measuring faces ø7,5 Anvils 40 Za Order no. Tapered anvil Order no. 4173113 4173114 4173115 4173116 4173117 4173118 4173119 4173120 4173121 4173122 4173513 4173514 4173515 4173516 4173517 4173518 4173519 4173520 4173521 4173522 3- 2 4 Micromar. Micrometers Accessories for Micromar Micrometers Stand 41 H •For mounting a micrometer •Enables the user to use both hands to operate the micrometer and / or to insert a work piece •Sturdy, heavy-duty base, hammer-dimple enamel finish •Jaw width 3.5 - 15 mm 41 H •Clamping jaws are rubber lined to protect micrometer, the clamping jaws can be tilted •Both the clamping jaws and hinge are fixed in place with one screw Dimensions Order no. (D x W x H) 130 x 100 x 90 mm Ball shaped Anvil Attachment 40 k Order no. Setting Standards 43 A 7,8 6,5 40 k •For testing the basic setting of a micrometer •Heat insulated handle •Manufacturing tolerance js 2 ø9 3,5 ø9,5 •For measuring the thickness, for example: of pipe walls •Slips over every anvil or the spindle with a dia. 7.5 mm •Carbide ball, Ball dia. 5 ± 0.002 mm 4158000 4130099 Mahr Thread Pin Gage 426 M in holder •For determining the pitch diameter of external threads according to the three wire method Length mm •Slips over every anvil or the spindle •Pin gages are hardened and lapped 25 50 75 100 125 150 175 Order no. Length inch Order no. 4159400 4159401 4159402 4159403 4159404 4159405 4159406 1“ 2“ 3“ 4“ 5“ 6“ 7“ 4159940 4159941 4159942 4159943 4159944 4159945 4159946 Wooden Cases for Micrometer Pin gage dia. Manufacturing tol. Mounting hole 0.17 - 5.05 mm ± 0.5 µm dia. 6.5 mm / 7.5 mm Order no. and further details see page 13-17 For measuring ranges over 100 mm the following wooden cases are available: Meas. range mm 40 SH 40 SM Order no. 100-125 125-150 150-175 175-200 95-120 120-145 145-170 170-195 4130064 4130065 4130066 4130067 + Micromar. Micrometers 3- 2 5 Inside Micrometer Micromar 44 F Features •Rigid, lightweight tubular construction •Spindle is hardened throughout and ground •Measuring faces spherically lapped, one measuring face adjustable •Scales with satin-chrome finish •From measuring range 100-125 mm with heat insulators and a locking device •Supplied with: Case Technical Data Measuring range mm 30 40 50 70 100 125 150 175 - 40 50 70 100 125 150 175 200 Readings mm Error limit G µm Spindle thread pitch mm Order no. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 4 4 5 5 6 6 7 7 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 4163000 4163001 4163002 4163003 4163004 4163005 4163006 4163007 Dimensions Meas. range in mm Accessories Special wear resistant steel, hardened and lapped Dimensions according to DIN 2250 C Manufacturing tolerance in accordance to DIN 2250 Uncertainty of the engraved actual dimension 1/2 IT1 - 40 50 70 100 125 150 175 200 ø7 ø7 ø7 ø7 ø8 ø8 ø8 ø8 b ø12.5 ø12.5 ø13.5 ø13.5 ø20 ø20 ø20 ø20 c d 2 2.5 2.5 4.5 4.5 8 8 8 4 4.5 4.5 4.5 4.5 8 8 8 355 E Page Ring Gage 355 E for testing the basic setting 30 40 50 70 100 125 150 175 a 13-19 e ø12.6 ø12.6 ø13.6 ø14.0 ø20 ø20 ø20 ø20 3- 2 6 Micromar. Micrometers Inside Micrometer Micromar 44 Cms Set Features •Scales with satin-chrome finish •Rigid, lightweight tubular construction •Carbide tipped spherical measuring faces •Spindle is hardened throughout and ground •Locking lever •Interchangeable extensions 44 Cv with cylindrical gage rods that are spring-mounted in protective sleeves; for the extension of the measuring range Span of error Basic unit 5 µm •Protection sleeves have a satin chrome finish (l = length of the combination Basic unit in combination with any of the extensions 4 µm + 10 x 10-6 x l in mm) •Supplied with: Case Technical Data Catalog no. Measuring range mm 44 Cms1 44 Cms2 44 Cms3 44 Cms4 100 100 100 100 - 150 300 500 900* Measuring head 44 Cm Readings Spindle thread pitch mm mm 0.01 Extensions 44 Cv length in Order no. mm 25 25 / 50 / 100 25 / 50 / 100 / 200 25 / 50 / 100 / 200 / 400 0.5 4168020 4168021 4168022 4168023 Accessories Inside Micrometers, ring gages, etc. please refer to page 3-30 * up to 2500 mm can be achieved with 2 extensions: 44 Cv 800 mm + Micromar. Micrometers 3- 2 7 Inside Micrometer Micromar 44 CB with reduced measuring faces Features •Spindle is hardened throughout and ground •Basic Instrument consists of: Measuring head 44 CBm and End piece CBv •Locking lever •Measuring faces have a smaller diameter for measuring grooves •Carbide tipped spherical measuring faces •Rigid, lightweight tubular construction •Interchangeable extensions 44 Cv with cylindrical gage rods that are spring-mounted in protective sleeves; for the extension of the measuring range (Accessories) Span of error Basic unit 6 µm •Protection sleeves have a satin chrome finish (l = length of the combination Basic unit in combination with any of the extensions 4 µm + 10 x 10-6 x l in mm) •Supplied with: Case Technical Data Measuring range (Measuring head 44 CBm and End piece CBv) Measuring head 44 CBm Readings Spindle thread pitch mm mm mm 150 175 250 275 - 175 200 275 300 0.01 Order no. 4167922 4167906 4167912 4167921 0.5 Accessories Individual Extensions 44 Cv Length mm Order no. Length mm Order no. 25 50 100 4167030 4167031 4167032 200 400 800 4167033 4167034 4167035 Case, wooden boxes, etc. please refer to page 3-30 Dimensions Meas. range in mm 150 175 200 275 - 175 200 275 300 a 10 20 40 50 b dia. 5 dia. 5 dia. 5 dia. 5 3- 2 8 Micromar. Micrometers Inside Thread Micrometer Micromar 44 CZ Features Span of error Basic unit 6 µm •Scales with satin-chrome finish •Interchangeable extensions 44 Cv with cylindrical gage rods that are spring-mounted in protective sleeves; for the extension of the measuring range (Accessories) •Carbide tipped spherical measuring faces •Protection sleeves have a satin chrome finish (l = length of the combination •Spindle is hardened throughout and ground •Basic Instrument consists of: Measuring head and End piece •Measuring head and End piece with mounting bore for interchangeable anvils •Rigid, lightweight tubular construction •Locking lever Basic unit in combination with any of the extensions 4 µm + 10 x 10-6 x l in mm) •Supplied with: Case Technical Data Measuring range (Measuring head 44 CZm and End piece CZe) Measuring head 44 CZm Readings Spindle thread pitch mm mm mm 200 - 225 0.01 Order no. 4168030 0.5 Accessories Individual Extensions 44 Cv Length mm Order no. Length mm Order no. 25 50 100 4167030 4167031 4167032 200 400 800 4167033 4167034 4167035 Case, wooden boxes, etc. please refer to page 3-30 + Micromar. Micrometers 3- 2 9 Inchangeable Anvils for Inside Thread Micrometer Micromar 44 CZ For pitch diameters. Hardened, wear-resistant special steel. With cylindrical mounting shank and retainer ring which ensures locking while permitting rotation in bore of spindle and anvil. For pitch diameters Metric thread (60°) Pitch V-anvil Order no. mm 0.5 0.7 1.25 2 3.5 5 7 - 0.7 1 2 3.5 5 7 9 4179400 4179401 4179402 4179403 4179404 4179405 4179406 Whitworth thread (55°) Tapered anvil Order no. 4173400 4173401 4173402 4173403 4173404 4173405 4173406 For pitch diameters Pair consists of V-anvil and tapered anvil. Shank length 15.5 mm Trapezoid threads according to DIN 103 Pitch mm 1 1.5 2 3 4 5 6 7 8 9 10 12 14 16 18 20 V-anvil Order no. Pointed anvil Order no. 4179950 4179951 4179952 4179953 4179954 4179955 4179956 4179957 4179958 4179959 4179960 4179961 4179962 4179963 4179964 4179965 4173650 4173651 4173652 4173653 4173654 4173655 4173656 4173657 4173658 4173659 4173660 4173661 4173662 4173663 4173664 4173665 Pitch range TPI 40 32 24 18 14 10 7 4.5 3 - V-anvil Order no. 32 24 18 14 10 7 4.5 3 2.5 4179043 4179044 4179045 4179046 4179047 4179048 4179049 4179050 4179407 American UST thread (60°) Tapered anvil Order no. 4173443 4173444 4173445 4173446 4173447 4173448 4173449 4173450 4179409 Pitch range TPI 40 32 24 18 14 10 7 4.5 - V-anvil 32 24 18 14 10 7 4.5 3 Order no. Tapered anvil Order no. 4179115 4179116 4179117 4179118 4179119 4179120 4179121 4179122 4173515 4173516 4173517 4173518 4173519 4173520 4173521 4173522 3- 3 0 Micromar. Micrometers Accessories for Micromar 44 Cms / 44 CB / 44 CZ Order no. 15 15 15 15 15 22 4167030 4167031 4167032 4167033 4167034 4167035 25 50 100 200 400 800 9 11 Measuring range mm Reading 100 - 125 ø16 Inside Micrometer 44 Cm 44 CV a ø18 dia. b mm b Length a mm M10x1 Individual Extensions 44 Cv Order no. mm Spindle thread pitch mm 0.01 0.5 4168001 11 44 Cm a Ring Gage 355 E Ring Gage 355 E for testing the basic setting see page 13-19. Special wear resistant steel, hardened and lapped Dimensions according to DIN 2250 C Manufacturing tolerance in accordance to DIN 2250 Uncertainty of the engraved actual dimension 1/2 IT1 Order no. Case for Inside Micrometer 44 Cm and extension sets Cvs1 or Cvs2 Wooden case for 2 extensions 44Cv 800 mm 4168015 4168016 355 E + Micromar. Micrometers 3- 3 1 Self-Centering Inside Micrometer Micromar 44 A Features •Scales with satin-chrome finish •Spindle is hardened throughout and ground •Rapid drive with integrated ratchet •Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120° Applications For measuring: • through holes • blind holes • centering shoulders Technical Data Measuring range mm 6 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 - Measuring depth mm 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 200 Readings mm Error limit G* µm Order no. 0.001 0.001 0.001 0.001 0.001 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 4 4 4 4 4 4 4 4 4 5 5 5 5 6 6 7 7 4190310 4190311 4190312 4190313 4190314 4190315 4190316 4190317 4190319 4190320 4190321 4190012 4190013 4190014 4190015 4190016 4190017 58 / (133**) 58 / (133**) 58 / (133**) 64 / (139**) 64 / (139**) 68 / (218**) 68 / (218**) 76 / (226**) 76 / (226**) 79 / (229**) 79 / (229**) 97 / (247**) 97 / (247**) 132 / (282**) 132 / (282**) 132 / (282**) 132 / (282**) * Over the full length of the anvils ** With the extension 44 Av Self-Centering Inside Micrometer Sets 44 AS Measuring range Number of Micrometers mm 6 12 20 50 - 12 - 20 - 50 - 100 • Supplied with: Case and ring gage Ring gages Order no. dia. mm 3 2 4 4 8 / 10 16 25 / 40 60 / 85 4190350 4190351 4190352 4190353 •Anvils from 12 mm are carbide tipped •From 12 mm the anvils can be used to measure to the bottom of a bore •From 40 mm all measuring heads are made from aluminum to reduce weight •Supplied with: Case and operating instructions Accessories Measuring heads, ring gages, etc. please refer to page 3-34 3- 3 2 Micromar. Micrometers Digital Self-Centering Inside Micrometer Micromar 44 EWR IP52 ABS Features Functions: 0 (Setting the display to zero for Relative measurement) ABS (Switching between Relative and Absolute measurement) mm/inch PR (Reference setting) Applications For measuring: • through holes • blind holes • centering shoulders Technical Data Measuring range 6 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 Measuring depth mm mm (inch) - 8 (.25 - .3125“) 58 / (133**) 10 (.3125 - .4“) 58 / (133**) 12 (.4 - .4725“) 58 / (133**) 16 (.4725 - .625“) 64 / (139**) 20 (.625 - .775“) 64 / (139**) 25 (.775 - 1“) 68 / (218**) 30 (1 - 1.2“) 68 / (218**) 40 (1.2 - 1.6“) 76 / (226**) 50 (1.6 - 2“) 76 / (226**) 60 (2 - 2.35“) 79 / (229**) 70 (2.35 - 2.75“) 79 / (229**) 85 (2.75 - 3.35“) 97 / (247**) 100 (3.35 - 4“) 97 / (247**) 125 (4 - 4.9“) 132 / (282**) 150 (4.9 - 5.9“) 132 / (282**) 175 (5.9 - 6.9“) 132 / (282**) 200 (6.9 - 7.9“) 132 / (282**) * Over the full length of the anvils Readings Order no. mm / inch Error limit G* µm 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 0.001 / .00005“ 4 4 4 4 4 4 4 4 4 5 5 5 5 6 6 7 7 4191120 4191121 4191122 4191123 4191124 4191125 4191126 4191127 4191129 4191130 4191131 4191032 4191033 4191034 4191035 4191036 4191037 ** With the extension 44 Av Digital Self-Centering Inside Micrometer Sets Micromar 44 EWR Measuring range mm (inch) Number of measuring heads 44 Ak Ring gages Order no. dia. mm 6 12 (.25 - .4725“) 3 8 / 10 12 20 (.4725 - 775“) 2 16 20 50 4 25 / 40 (.775“ - 2“) 50 - 100 4 60 / 85 (2 - 4“) • Supplied with: 1 Basic Unit 44 EWg, Measuring Heads 44 Ak, case and ring gages 4191160 4191161 4191162 4191163 •Immediate measurement due to the Reference system •Basic Instrument consists of: Basic Unit 44 EXg and Measuring Head 44 Ak •Threaded connection for changing the measuring heads •Self-Centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120° •Anvils from 12 mm are carbide tipped •From 12 mm the anvils can be used to measure to the bottom of a bore •From 40 mm all measuring heads are made from aluminum to reduce weight •Supplied with: Case, battery and operating instructions Accessories Measuring heads, ring gages, etc. please refer to page 3-34 + Micromar. Micrometers 3- 3 3 Self-Centering Measuring Pistol Micromar 844 A Features Applications For measuring: • through holes • blind holes • centering shoulders Technical Data Measuring range mm 6 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 - Measuring depth Error limit G* mm µm / inch (inch) 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 200 (.25 - .3125“) (.3125 - .4“) (.4 - .4725“) (.4725 - .625“) (.625 - .775“) (.775 - 1“) (1 - 1.2“) (1.2 - 1.6“) (1.6 - 2“) (2 - 2.35“) (2.35 - 2.75“) (2.75 - 3.35“) (3.35 - 4“) (4 - 4.9“) (4.9 - 5.9“) (5.9 - 6.9“) (6.9 - 7.9“) 58 / (133**) 58 / (133**) 58 / (133**) 64 / (139**) 64 / (139**) 68 / (218**) 68 / (218**) 76 / (226**) 76 / (226**) 79 / (229**) 79 / (229**) 97 / (247**) 97 / (247**) 132 / (282**) 132 / (282**) 132 / (282**) 132 / (282**) 3 / .00015 3 / .00015 3 / .00015 3 / .00015 3 / .00015 3 / .00015 3 / .00015 3 / .00015 3 / .00015 4 / .00016 4 / .00016 4 / .00016 4 / .00016 5 / .0002 5 / .0002 6 / .00025 6 / .00025 * Indicator is not taken into consideration, over the full length of the anvils ** With the extension 44 Av Self-Centering Measuring Pistol Set Micromar 844 AS Measuring range mm (inch) Number of measuring heads Ring gages dia. mm Order no. Order no. with Digital excludes Indicator Indicator 1086 R 6 - 12 (.25 - .4725“) 3 8 / 10 4487760 12 - 20 (.4725 - .775“) 2 16 4487761 20 - 50 4 25 / 40 (.775“ - 2“) 4487762 50 - 100 4 60 / 85 (2 - 4“) 4487763 •Supplied with: 1 Basic Instrument 844 Ag, Measuring Heads 44 Ak, case and ring gages 4487750 4487751 4487752 4487753 Order no. excludes Indicator 4487700 4487701 4487702 4487703 4487704 4487705 4487706 4487707 4487709 4487710 4487711 4487612 4487613 4487614 4487615 4487616 4487617 •Basic Instrument consists of: 844 Ag and Measuring Head 44 Ak •Threaded connection for changing the measuring heads •Self-Centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120° •Anvils from 12 mm are carbide tipped •From 12 mm the anvils can be used to measure to the bottom of a bore •From 40 mm all measuring heads are made from aluminum to reduce weight •Supplied with: Case and operating instructions The following indicating instruments are recommended: Indicating instr.Order no. MarCator 1086 Ri MarCator 1086 R MarCator 1087 Ri MarCator 1087 R 4337625 4337621 4337665 4337661 Accessories Measuring heads, ring gages, etc. please refer to page 3-34 3- 3 4 Micromar. Micrometers Accessories for Micromar 44 A, 44 EWR, 844 A Measuring Heads 44 Ak for 44 EWR Ring Gages 355 E •Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120° •Anvils from 12 mm are carbide tipped •From 12 mm, anvils can be used to measure to the base of a bore •From 40 mm all measuring heads are made from aluminum to reduce weight • Can be used for 2 consecutive measuring ranges • Manufacturing tolerance in accordance to DIN 2250C Measuring range mm - 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 200 4190330 4190331 4190332 4190333 4190334 4190335 4190336 4190337 4190339 4190340 4190341 4190042 4190043 4190044 4190045 4190046 4190047 (.25 - .3125“) (.3125 - .4725“) (.4725 - .5“) (.5 - .625“) (.625 - .775“) (.775 - 1“) (1 - 1.2“) (1.2 - 1.6“) (1.6 - 2“) (2 - 2.35“) (2.35 - 2.75“) (2.75 - 3.35“) (3.35 - 4“) (4 - 4.9“) (4.9 - 5.9“) (5.9 - 6.9“) (6.9 - 7.9“) Meas. range 12 - 200 mm 8 10 16 25 40 4710026 4710030 4710036 4710045 4710060 60 85 125 175 4710080 4710105 4710121 4710122 Basic Unit 44 EWg Threaded connection for changing the measuring heads Measuring range mm 6 20 100 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 200 - Order no. 20 100 200 4190106 4190107 4190108 Basic Unit Measuring Pistol 844 Ag 4487410 b b a Measuring range mm - Order no. Measuring range mm (inch) c c 6 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 dia. mm Threaded connection for changing the measuring heads. Any indicating instrument with an 8 mm mounting shank can be used. d d Meas. range 6 - 12 mm Order no. a b c 1.5 1.8 1.8 – – – – – – – – – – – – – – 4 4.3 4.3 6.5 6.5 9 9 15 15 18 18 23 23 27 27 27 27 1.5 1.5 1.5 4 4 4 4 5 5 5 5 7 7 7 7 7 7 d 58 58 58 64 64 68 68 76 76 79 79 97 97 132 132 132 132 6 20 100 - Order no. 100* (.25 - 4.0“) 100 (.775 - 4.0“) 200 (4.0 - 7.9“) 4487630 4487631 4487632 * Includes adapter 4487410 Depth Extension Rod 44 Av 44 Av b 6 8 10 12 16 20 25 30 40 50 60 70 85 100 125 150 175 Order no. (inch) dia. mm a Measuring range mm (inch) 6 12 20 30 - 12 20 30 200 (.25 - .5“) (.5 - .775“) (.775 - 1.2“) (1.2 - 7.9“) Length a mm dia. b mm Order no. 75 75 150 150 5.8 8.5 19.0 22.0 4190090 4190091 4190092 4190093 + Micromar. Micrometers 3- 3 5 Depth Micrometer Micromar 45 T Features Applications • Depth measurement • Measuring the space between grooves and groove widths (in conjunction with a Disc anvil 45 Tm) •Measuring spindle is hardened throughout and ground •Hardened chrome plated cross beam, the contact surface is lapped •Hardened anvil •When using interchangeable extensions recalibrating the depth micrometer is not necessary •Scales with satin-chrome finish •Supplied with: Extensions 25 mm and 50 mm, case Technical Data Total measuring range mm Range of micrometer Readings Spindle thread pitch Measuring force mm Error limit with a standard anvil µm mm mm 0-100 25 0.01 0.5 ≤5 Standard depth measurements With a standard anvil, if necessary with an extension Order no. N Length tolerance of extensions µm 5 - 10 ± 1.5 4180000 Measuring the space between grooves and the widths of a groove Dimension A: Can be direct read of the thimble With disc anvil 45 Tm, if necessary with an extension Dimension B: The reading plus 1.00 mm (thickness of the disc anvil) 1,00 13 Dimension C: Dimension B minus Dimension A A B C 100 x 16 Accessories Order no. Disc anvil 45 Tm for groove spacing and groove widths M3 45 Tm Length tolerance ± 1.5 µm ± 1.5 µm ± 1.5 µm 4180001 4180002 4180003 1 Extensions 45 Tv Length L 25 mm 50 mm 100 mm 4180011 ø9 3- 3 6 Micromar. Micrometers Digital Micrometer Head Micromar 46 EWR IP52 ABS Features Functions: 0 (Zero setting) ABS (Switch between Relative and Absolute measurement) mm/inch PRESET (enter a numerical value) DATA (Data transmission via connection cable) •Patented capacitive measuring system with an energy saving function, life of the battery approx. 2 years •Ratchet with integrated coupler •Supplied with: Case, end cap (in case the rapid drive is not required) and operating instructions Technical Data mm / inch 0.001 0.001 0.001 0.001 / / / / .00005” .00005” .00005” .00005” 4 4 4 4 flat flat spherical spherical Mounting shaft mm 12 M12x1* 12 M12x1* 4184305 4184307 4184306 4184308 Accessories Order no. Battery 3V, type CR 2032 Data Connection Cable USB (2 m) 16 EXu Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr Data Connection Cable Digimatic (2 m), Flat plug 10-pin 16 EWd Accessories for Data Processing see Chapter 11 Order no. * with locking nut Measuring face (0-1“) (0-1“) (0-1“) (0-1“) Error limit Gme µm 0-25 0-25 0-25 0-25 Readings Measuring range mm (inch) 4102520 4102357 4102410 4102915 + Micromar. Micrometers 3- 3 7 Micrometer Head Micromar 46 Features •Spindle is made of stainless steel, hardened throughout and ground •Scales with satin-chrome finish Technical Data Measuring range mm Readings Error limit Gme DIN 863 µm mm Spindle thread pitch mm Spindle dia. Order no. mm 0 0 0 0 0 - 6.5 13 25 25* 50 0.01 0.01 0.01 0.01 0.01 3 3 3 3 5 0.5 0.5 0.5 0.5 0.5 3.5 5 6.35 6.35 7.5 4183021 4183025 4183030 4183024 4183023 46 H 0 - 25** 0.01 3 0.5 7.5 4184000 ø8,6 ø3,5 * with locking nut ** with ratchet, carbide tipped ø6-0,008 46 4183021 Measuring range 0-6.5 mm ø9,5 6 1 ø9,5h6 ø15 ø10 4183025 Measuring range 0-13 mm ø18,5 4183030 Measuring range 0-25 mm ø18,5 ø5 19,5 ø14,2 9 4183024 Measuring range 0-25 mm with locking nut 17,5 9,5 2 26,5 ø10h6 ø10 ø6,35 3,5 ø17,5 2,5 27 15 2,2 46 ø10h6 ø10 ø6,35 3,5 ø17,5 2,5 27 15 2,2 46 ø12h6 4184000 Measuring range 0-25 mm carbide tipped ø12 ø18,5 ø7,5 3,5 ø17,5 2,5 16 1,2 2,5 13 ø12h6 ø17,5 46 ø10 ø7,5 59 29 1,2 2,5 76 4,3 ø18,5 27 4183023 Measuring range 0-50 mm