Dr. Fixit Raincoat

Dr. Fixit Raincoat
E LASTO MERI C AC RYL I C WAT ERP R O O F
E XTE RIO R C OAT I NG
• Excellant waterproofing against wind
driven rain
• Excellant elasticity- bridges cracks up to
0.5 mm width
• Higher Film thickness of 100-120 micron
• Easily tintable to various shades
• Excellant resistance to Algae and Fungus
• Non-toxic, lead-free coating
Dr. Fixit Raincoat
E L ASTO M E R I C AC R Y LI C WAT E R PR O O F EXT ERI OR C OAT I NG
Description
Dr. Fixit Raincoat is an exterior acrylic elastomeric coating that offers waterproofing as well as aesthetics in a single
pack. It provides the complete solution to prevent dampness and seepages that spoil the expensive interiors and
decorative interior paints. It is highly user friendly and eco-friendly. The best part of the system is that, there is NO NEED
TO DILUTE IT WITH WATER for application. It accompanies a very easy-to-use, in-expensive, highly effective primer
Dr. Fixit Primeseal. It is easily brush or spray-applied. It gives a thickness of 110 microns, almost double of what other
commercial coatings have to offer by way of coating thickness. It is available in colours of choice that can be obtained
from two bases – white base & dark base that are easily tintable - to produce any desired shade. Dr. Fixit Raincoat has
a sheen and smoothness unparalleled to any other exterior paint. On exterior walls, Raincoat is recommended to be
applied right upto the parapet walls and over them till the inner side, till the edge of the roof / terrace waterproofing,
which will provide a complete waterproofing envelope to the exterior.
Areas of Application
All types of exterior masonry surfaces, concrete, cement sand renderings
}}
Applicable on asbestos sheets.
}}
Method of Application
1 S U R FAC E P R E PA R AT I O N
All new cement-sand renderings /concrete surfaces should be allowed to age 6 to 8 weeks before surface coating.
}}
Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease by mechanical means
such as wire brushing & shot blasting .
}}
Finally vacuum cleaning of all loose solids and liquids can be done, if required.
}}
All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X Paste & up to 10 mm with Dr. Fixit Crack-X
Shrinkfree. Cracks more than 10 mm and all separation gaps should be filled up with Dr. Fixit Pidicrete URP, SBR
modified mortar or as specified.
}}
2 P R I M I N G
Prime the surface with Dr. Fixit Primeseal diluted with potable water by volume in 2:1 ratio (2 parts primer and 1 part
water) and allow it to dry for 2 to 3 hours
}}
3 A P P L I C AT I O N
Apply two neat coats of Dr. Fixit Raincoat without dilution by brush or roller at a time interval of 5-6 hours.
}}
For enhanced protection, apply additional coat of Dr. Fixit Raincoat on rain lashing walls, chajjas and parapet walls.
}}
Allow the coated surface to air cure fully for 7 days.
}}
Do not apply on putty applied or very smooth surfaces for the risk of de-bonding.
}}
COVERAGE
3.0 to 3.5 m2 per litre for 2 coats*
PACKAGING
1 ltr
SHELF LIFE & STORAGE
18 months from date of manufacturing in unopened condition in cool and dry place.
4 ltr
20 ltr
For more information, please refer Technical Data Sheet
Pidilite Industries Ltd.
Ramakrishna Mandir Road, P. B. No. 17411,
Andheri (E), Mumbai 400 059.
T (022) 2835 7000 F (022) 2835 7008
www.doctor-fixit.com • [email protected]
1800 209 5504
CONTACT US: AHMEDABAD (079) 27552043/ 1483 BENGALURU (080) 30563000 /3001
CHENNAI (044) 28350338/ 1614 DELHI (011) 45529000 HYDERABAD (040) 23351250/ 1308
KOCHI (0484) 2543978, 3045000 KOLKATA (033) 22888844 MUMBAI (022) 2835 7000
OVERSEAS CONTACTS: DUBAI +9714 3471678 SINGAPORE +65 67638681 THAILAND +66 27228535
DISCLAIMER The product information & application details given by the company & its agents has been provided in good faith & meant to serve only as a general guideline during usage. Users are advised
to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the problems, quality of other
materials used and on-site workmanship are factors beyond our control, there are no expressed or implied guarantee/ warranty as to the results obtained. The Company does not assume any liability or
any consequential damage for unsatisfactory results, arising from the use of our products.
WATERPROOFING
COATING & PAINTS
BUILDING REPAIRS
TILE FIXING SOLUTIONS
SEALANTS
CONCRETE ADMIXTURES
INDUSTRIAL FLOORING
GROUTS & ANCHORS
CC-DF-13CC0539-LF-ENG-12/13
CALL DR. FIXIT ADVICE CENTRE TOLL FREE NO. FOR EXPERT ADVICE