Layout 2 - JLS Motorsport

Transcription

Product Catalogue
www.lister.co.uk/motorsport
JLS Motorsport is a specialist division of James Lister &
Sons Ltd, a family business, established in 1874. For over
20 years we have demonstrated an excellent reputation
for quality and service. We design and manufacture high
performance brake components, air jack systems and
bespoke components for the motorsport industry.
JLS Motorsport products are specified
by leading race car constructors and
end users world-wide.
Using our purpose built CAD and
CNC manufacturing facilities we can
generate the products to suit your
particular requirement.
JLS Motorsport has formed many close
relationships with leading motorsport
suppliers from around the world. One
of these being XRP Inc, based in the
USA, who are at the forefront of the
development and production of
Aerospace quality hose couplings and
adaptors. We are proud to be the
Official Distributor of these products
throughout Europe. If you require any
JLS Motorsport products within the
United States of America, these are
obtainable through XRP Inc, as our
Official US Distributor.
All of our motorsport products can
also be purchased from our website
www.lister.co.uk. Here you will be
able to source many other James Lister
& Sons items. There are numerous
other ranges that are relevant to the
motorsport industry such as hand
tools and consumables.
Official UK & European Master Distributor for
Always at the forefront of design with top quality
hoses, adapters and fittings, and are probably the
most technically advanced fluid delivery systems
available today to the worlds motor sport arena.
2
T: +44 (0)121 525 5800 F: +44 (0)121 525 4833 www.lister.co.uk/motorsport
Contents
Page
Air Jack Systems
Air Jacks
4
JLS Stainless Steel Braided Hose
411 Series
8
411 Series Hose Fittings
9
411 Series – Adaptors: Calliper, Clutch & other applications
14
XRP Product Range
XRP Products
17
AH02 Series – Hose
18
AH02 Series – XRP Hose Fittings
19
Performance Hose Ends
20
Double Swivel, Triple Sealed Hose Ends
20
XRP Hose Finishers
22
XR-31 Lightweight Performance Hose
22
Aluminium Adapter Fittings
23
Special 37˚ JIC Adapters & Fittings
26
Carburettor Adapters & Fittings
27
AH02 Series – Hardline Tubing
28
Hydraflow Clamps
Quick Disconnect Fittings
29
Silicone Hoses and Aluminium Pipes
JLS Motorsport Performance Silicone Hoses and Aluminium Pipes
32
Oil Coolers
Setrab Oil Coolers
33
Cables
JLS F.A.S.T. Tension/Push-Pull
34
Brake Bias Cable
35
Accessories
JLS Valves
36
Hose Protection
36
Fuel/Oil
36
FSE, Sytec – Motorsport – Fuel Pump, Filter Brackets & Billet Filter
37
Cool IT
New Heat Protection Range
38
Tube Manipulation
Tube Manipulation
40
Technical Details
Hose Length Measurement Techniques
42
Installation Tips
43
www.pirtek.co.uk
3
Air Jack Systems
Air Jacks
JLS Air Jacks
JLS Airjacks systems are used by Touring Car, Sports Car, Saloon Car
and GT series race teams throughout the world motorsport markets.
The JLS Airjacks are designed and manufactured to withstand the
most challenging race operating conditions, They are exceptionally
lightweight and the use of light weigh low friction materials lifts the
car with the least amount of effort and in the fastest possible time.
• Body: Constructed from Isothermal forged aluminium
for the thinnest possible wall thickness.
• Piston Rod: Seamless heat-treated steel tube with
a ground chrome finish outside diameter.
• Spring: Made to BS2803 standard from Chrome
Spring Steel Zylon Coated.
• Bearing: Sintered Bronze
• Foot: Machined from aerospace quality aluminium
with a Hard Anodised finish.
Code
Overall Length (mm)
Cylinder Diameter (mm)
Stroke (mm)
AJ01
AJ02
AJ03
407
305
355
52
52
88
270
180
230
Weight (kg)
Maximum Lift (kg)
WP (Bar)
500
500
1500
35
35
35
JLS Lance
The JLS Lance has been designed to work with the JLS Airjack
and with an ease of operation paramount, and is constructed
using high quality materials to ensure reliability with an ideal
working pressure of 35bar.
.
Code
AJL01
Material Identification: Z = Zinc Plated Mild Steel HC = Stainless Steel D = Aluminium B = Brass
4
JLS Probe
The JLS Probe can be used to temporarily keep Air Jacks
active without the need for a continuous air supply.
This unit is manufactured from special coated lightweight
materials to ensure durability and smoothness of operation.
Code
AJP01
JLS Air Jack Safety Support Stands
Air Jack Safety Support Stands are used as a failsafe device when
the Airjacks piston rod is exhausted. It is an ideal Health & Safety
device to prevent the piston rod from retracting in the event of an
air supply failure.
Code
Air Jack Model
Material
SSJ01D
SSJ02
AJ01
AJ02
D
D
5
Air Jacks
Elephants Feet Airjack Stands
Theses stands are a perfect addition to the system if you need
to lift the car to a second stage giving more working space under
the car and are made from lightweigh aluminium construction for
ease of use.
Code
Air Jack Model
AJEF-01
AJEF-02
AJ01
AJ02
Elephant Feet Kits
Elephant Feet can also be supplied in kits of either 3 or 4
and are packed in a secure robust portable trolley for storage
and transportation.
Code
AJEF
AJEF
AJEF
AJEF
6
Air Jack Model
-
01Kit3
02Kit3
01Kit4
02Kit4
AJ01
AJ02
AJ01
AJ02
Typical Air Jack System
JLS Motorsport can supply all the necessary associated components
to make up a 4 or 3 Airjack system.
3 x Air Jack Arrangement shown as example
A typical Air Jack Kit would consist of:
Air Jacks, Lance, Probe, Single & Double Banjos and Bolts,
Tee piece, Hard-line Tube, probe connecting hose and all
necessary washers.
Optional extras would consist of:
Safety Support Stands, Air Line Hose, Elephants Feet stands,
Tube Flarer and Cutter.
4 x Air Jack Arrangement shown as example
7
JLS Stainless Steel Braided Hose
411 Series
Type 4011-3 PTFE Smooth Bore Hose
For larger size hose on fuel and lubrication JLS PTFE hose also
has many advantages. Because of its smooth bore, this series
provides an uninterrupted passage for fuels and oils, thus
eliminating the starvation and cavitational problems sometimes
associated with convoluted hase when high flow rates are used.
The stainless steel outer braid offers excellent resistance to heat,
abrasion and mechanical damage and will not absorb oil and
fuel into its braiding, thus eliminating weigh gain.
Construction:.
• Inner Core:
Extruded smooth bore PTFE Resin.
• Reinforcement:
One layer of 304 wire braid.
• Temperature Rating: -55°C to +232°C (-67°F to +45°F).
The exceptional resistance of PTFE to high temperatures, permeably,
chemical attack, water resistance and its low friction properties
make it an ideal choice for motorsport applications.
Other benefits include high working pressures and an extremely
wide range of end fitting configurations. JLS Brake Hose 4011
has a PTFE core, with an improved closely controlled braid
specification that provides a greatly increased resistance to
volumetric expansion, resulting in a positive and responsive
brake and clutch pedal.
• Couplings:
Re-useable or permanently attached.
• Applications:
Brake, Clutch, Instrumentation,
Fuel & Lubrication.
• PC:
Clear extruded outer cover to prevent
damage to the stainless steel braid.
• C:
Carbon Lined to prevent static build-up.
• Colours:
BE-Blue, RD-Red, PC-Clear, HB-Black.
Code
Type
I.D (mm)
O.D (mm)
Operating Pressure (PSI)
Min. Burst Pressure (PSI)
4011-03
4011-03-BE
4011-03-HB
4011-03-PC
4011-03-RD
4011-04
4011-06-C
Standard
Blue
Black
Clear
Red
Standard
Carbon
3.2
3.2
3.2
3.2
3.2
4.8
8.1
6.4
6.7
6.7
6.7
6.7
7.6
10.9
3,000
3,000
3,000
3,000
3,000
3,000
2,500
12,000
12,000
12,000
12,000
12,000
12,000
10,000
A Full Range of Hose Assemblies
are available to Customer
Requirements in Crimped
configuration. Call for more
information: Tel: 0121 525 5800
Material Identification: Z = Zinc Plated Mild Steel HC = Stainless Steel D = Aluminium (check availability) B = Brass
8
411 Series – Hose Fittings
Standard Banjo Series 2
20° Side Extended Neck Banjo Series 1
Code
Banjo Bolt Sizes Accepted
Hose Dash Size
Material
Code
Hose Dash Size
Material
A15-3HC
A15-3Z
A15-3-4HC
A15-3-4Z
A15-4-3Z
A15-4Z
A15-4MZ
3/8UNF, M10, 1/8 BSP.
3/8UNF, M10, 1/8 BSP.
7/16UNF
7/16UNF
3/8UNF, M10, 1/8 BSP.
7/16UNF
M12
3
3
3
3
4
4
4
HC
Z
HC
Z
Z
Z
Z
A14-3D
A14-3HC
A14-3Z
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3
3
3
D
HC
Z
40° Extended Neck Banjo Series 1
Straight Extended Neck Banjo Bolt Series 1
Code
Hose Dash Size
A08-3HC
M8 x 1.0
3
HC
A08-3Z
A11-3D
A11-3HC
A11-3Z
M8 x 1.1
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3
3
3
3
Z
D
HC
Z
Code
Hose Dash Size
Material
A13-3D
A13-3HC
A13-3Z
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3
3
3
D
HC
Z
Material
Code
Hose Dash Size
Material
A12-3D
A12-3HC
A12-3Z
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3
3
3
D
HC
Z
Code
Hose Dash Size
Material
A82-3D
A82-3HC
A82-3Z
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3
3
3
D
HC
Z
Code
Hose Dash Size
Material
A83-3Z
3/8UNF, M10, 1/8BSP
3
Z
9
Double Extended Neck Banjo Series 1
90° Swept Female (Swivel)
Includes Multi-Seal Face
Code
Hose Dash Size
Material
A59-3D
A59-3HC
A59-3Z
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3
3
3
D
HC
Z
Double Take Off Series 2
Code
Thread
Hose Dash Size
Material
A19-3Z
A86-3D
A86-3HC
A86-3Z
A86-3-2Z
A86-4Z
A19-4Z
1/8 BSP
3/8 JIC x 24 TPI
3/8 JIC x 24 TPI
3/8 JIC x 24 TPI
M10 x 1.0
7/16 JIC x 20TPI
1/4 BSP
3
3
3
3
3
4
4
Z
D
HC
Z
Z
Z
Z
45° Block Female (Block Forged)
Code
Hose Dash Size
Material
A16-3HC
A16-3Z
3/8UNF, M10, 1/8BSP
3/8UNF, M10, 1/8BSP
3
3
HC
Z
45° Swept Female (Swivel)
Code
Thread
Hose Dash Size
Material
A581-3HC
A58-4HC
A58-6HC
3/8 JIC x 24 TPI
7/16 JIC x 20 TPI
9/16 JIC x 18 TPI
3
4
6
HC
HC
HC
90° Block Female (Block Forged)
Code
Thread
Hose Dash Size
Material
A20-3Z
A88-3D
A88-3HC
A88-3Z
A88-3-2HC
A88-3-2Z
A88-4Z
A20-4Z
1/8 BSP
3/8 JIC x 24 TPI
3/8 JIC x 24 TPI
3/8 JIC x 24 TPI
M10 x 1.0
M10 x 1.0
7/16 JIC x 20 TPI
1/4 BSP
3
3
3
3
3
3
4
4
Z
D
HC
Z
HC
Z
Z
Z
Code
Thread
Hose Dash Size
Material
A561-3HC
A56-4HC
A56-6HC
3/8 JIC x 24 TPI
7/16 JIC x 20 TPI
9/16 JIC x 18 TPI
3
4
6
HC
HC
HC
10
Bulkhead Male, Flare
Double Banjo Bolts for Series 1 Banjos
Code
Thread
Hose Dash Size
Material
Code
Thread
Material
A30-3HC
A30-3Z
A31-3HC
A31-3Z
3/8 UNF x 24 TPI
3/8 UNF x 24 TPI
M10 x 1.0
M10 x 1.0
3
3
3
3
HC
Z
HC
Z
A49-3D
A49-3HC
A49-3Z
A50-3D
A50-3HC
A50-3Z
A51-3D
A51-3HC
A51-3Z
3/8 UNF x 24 TPI
3/8 UNF x 24 TPI
3/8 UNF x 24 TPI
M10 x 1.0
M10 x 1.0
M10 x 1.0
M10 x 1.25
M10 x 1.25
M10 x 1.25
D
HC
Z
D
HC
Z
D
HC
Z
Banjo Bolt with Bleed Nipple Series 1
Single Banjo Bolts
Code
Thread
Material
A135-3HC
A135-3Z
A136-3HC SGL
A136-3Z
A137-3HC
A137-3Z
3/8 UNF x 24 TPI
3/8 UNF x 24 TPI
M10 x 1.0
M10 x 1.0
M10 x 1.0
M10 x 1.0
HC
Z
HC
Z
HC
Z
Double Banjo Bolt with Bleed Nipple Series 1
Code
Thread
Material
A138-3HC
A138-3Z
A139-3HC
A139-3Z
A140-3HC DBL
A140-3Z
3/8 UNF x 24 TPI
3/8 UNF x 24 TPI
M10 x 1.0
M10 x 1.0
M10 x 1.25
M10 x 1.25
HC
Z
HC
Z
HC
Z
Code
Thread
A43-3D
3/8 UNF x 24 TPI
A43-3HC
3/8 UNF x 24 TPI
A43-3Z
3/8 UNF x 24 TPI
A44-3D
M10 x 1.0
A44-3HC
M10 x 1.0
A44-3Z
M10 x 1.0
A45-3D
M10 x 1.25
A45-3HC
M10 x 1.25
A45-3Z
M10 x 1.25
A46-3Z
1/8 BSP
A47-4HC
7/16 UNF x 20 TPI
A47-4Z
7/16 UNF x 20 TPI
A47-424HC 7/16 x 24 TPI
A48-4Z
M12 x 1.0
A48-4-15Z M12 x 1.5
A141-3Z
M8 x 1.0
A141-3-2Z M8 x 1.25
A147-424HC 7/16 x 24 TPI
Series 2 - Extra Length.
A43-3LHC
3/8 UNF x 24 TPI
A43-3LZ
3/8 UNF x 24 TPI
A44-3LHC
M10 x 1.0
A44-3LZ
M10 x 1.0
A44-3-15LZ M10 x 1.5
A45-3LZ
M10 x 1.25
Material
D
HC
Z
D
HC
Z
D
HC
Z
Z
HC
Z
HC
Z
Z
Z
Z
HC
HC
Z
HC
Z
Z
Z
11
Female Bulkhead, Clip Fixing
Male, Inverted Flare
Code
Thread
Hose Dash Size
Material
Code
Thread
Hose Dash Size
Material
A85-3HC
A85-3Z
A84-3Z
A87-3Z
M10 x 1.0 Inverted Flare
3/8 UNF Inverted Flare
M10 x 1.0 Concave Flare
3
3
3
3
HC
Z
Z
Z
A26-3HC
A26-3Z
A27-3D
A27-3HC
A27-3Z
A28-3D
A28-3HC
A28-3Z
A37-3HC
A37-3Z
3/8 UNF x 24 TPI
3/8 UNF x 24 TPI
M10 x 1.0
M10 x 1.0
M10 x 1.0
M10 x 1.25
M10 x 1.25
M10 x 1.25
1/8 BSP
1/8 BSP
3
3
3
3
3
3
3
3
3
3
HC
Z
D
HC
Z
D
HC
Z
HC
Z
Code
Hose Dash Size
Material
A42-3D
A42-3HC
A42-3B
A42-4B
A42-4D
A42-6B
A42-6D
A42-8B
A42-8D
3
3
3
4
4
6
6
8
8
D
HC
B
B
D
B
D
B
D
Female Bulkhead, Locknut Fixing
Code
Thread
Hose Dash Size
Material
A38-3HC
A38-3Z
A39-3Z
A40-3Z
A55-3Z
3/8 UNF Concave Flare
3/8 UNF Concave Flare
3/8 UNF Inverted Flare
3
3
3
3
3
HC
Z
Z
Z
Z
Fixed Female
Code
Thread
Hose Dash Size
Material
A91-3HC
A91-3Z
3
3
HC
Z
Olive
Socket
Male Flare
Code
Thread
Hose Dash Size
Material
Code
Hose Dash Size
Material
A22-3HC
A22-3Z
A23-3D
A23-3HC
A23-3Z
A24-3HC
A24-3Z
3/8 UNF x 24 TPI
3/8 UNF x 24 TPI
M10 x 1.0
M10 x 1.0
M10 x 1.0
M10 x 1.25
M10 x 1.25
3
3
3
3
3
3
3
HC
Z
D
HC
Z
HC
Z
A41-3D
A41-3HC
A41-3Z
A41-4HC
A41-4Z
A41-6Z
A41-8Z
3
3
3
4
4
6
8
D
HC
Z
HC
Z
Z
Z
12
Copper Washers
Straight Female (Swivel)
Code
Thread
Hose Dash Size
Material
Code
Description
A18-3Z
A21-3D
A21-3HC
A21-3Z
A21-3-2HC
A21-3-2Z
A21-3-3HC
A18-4Z
A21-4HC
A21-4Z
A21-4D
A21-6D
A21-6HC
A21-6Z
1/8 BSP
3/8 JIC x 24 TPI
3/8 JIC x 24 TPI
3/8 JIC x 24 TPI
M10 x 1.0
M10 x 1.0
M10 x 1.25
1/4 BSP
7/16 JIC x 20 TPI
7/16 JIC x 20 TPI
7/16 JIC x 20 TPI
9/16 JIC x 18 TPI
9/16 JIC x 18 TPI
9/16 JIC x 18 TPI
3
3
3
3
3
3
3
4
4
4
4
6
6
6
Z
D
HC
Z
HC
Z
HC
Z
HC
Z
D
D
HC
Z
CW2
CW7
CWD8
CWM12
CWM14
CWM16
CWM8 8mm
CWM8/16
Washer
Washer
Washer
Washer
Washer
Washer
Washer
Washer
10mm-1/8BSP
7/16
3/4
12mm - 1/2"
14mm
16mm
8mm
Tee – Hose Connection
Male Thread Bracketed
A
A
C
C
B
B
Code
Point A
Point B
Point C
Hose Dash Size
Material
A104-3HC
A114-3HC
A111-3HC
Hose Connection
3/8 JI
Hose Connection
Hose Connection
3/8 JIC
Hose Connection
3/8 JIC
3/8 JIC
Hose Connection
3
3
3
HC
HC
HC
Tee – Male all Points
Code
Point A
Point B
Point C
Hose Dash Size
Material
A94-3B
1/8 BSP
1/8 BSP
1/8 BSP
3
B
13
411 Series – Adaptors: Calliper, Clutch and other applications
Male, Flare
JIC/Metric Bulkhead, Flare
Code
Description
Material
Code
Description
Material
815-3HC
815-3Z
815-3MZ
919-4-3Z
-3 JIC x -3
-3 JIC x -3
M10 x 1.0 x M10 x 1.0
-4 JIC x -3 JIC
HC
Z
Z
Z
832-3D
832-3HC
832-3Z
A77-3Z
-3 JIC x -3
-3 JIC x -3
-3 JIC x -3
M10 x 1.0 x M10 x 1.0
D
HC
Z
Z
Flare to UNF,
Metric & BSP
Flat Face
90° JIC Bulkhead, Flare
Code
Description
Material
Code
Description
Material
A62-3Z
A63-3Z
A64-3Z
A72-3HC
A72-3Z
A73-3HC
A73-3Z
A74-3HC
A74-3Z
A89-3Z
A89-4Z
3/8 JIC Flare x 1/8 BSP
M10 x 1.0 Flare x 1/8 BSP
M10 x 1.25 Flare x 1/8 BSP
3/8 JIC Flare x 3/8 UNF
3/8 JIC Flare 3/8 UNF
3/8 JIC Flare x M10 1.0
3/8 JIC Flare x M10 x 1.0
3/8 JIC Flare x M12 x 1.0 Inverted
7/16 JIC Flare x M12 x 1.0 Inverted
Z
Z
Z
HC
Z
HC
Z
HC
Z
Z
Z
833-3D
833-3HC
833-3Z
-3 JIC x -3 JIC
-3 JIC x -3 JIC
-3 JIC x -3 JIC
D
HC
Z
Code
Description
Material
A52-3HC
A52-3Z
A53-3HC
A53-3Z
3/8 UNF Locknut
3/8 UNF Locknut
M10 x 1.0 Locknut
M10 x 1.0 Locknut
HC
Z
HC
Z
JIC (AN) Male x NPT Male
Locknut
Female Bulkhead, Locknut
Code
Description
Material
816-3-02HC
816-3-02Z
-3 Male x 1/8 NPT Male
-3 Male x 1/8 NPT Male
HC
Z
Inverted Flare to BSP
Code
Hose Dash Size
Material
A54-3Z
5/8 x 26 TPI
3
Z
BSP Male Adaptor
Code
Description
Material
A65-3Z
A66-3Z
A69-3Z
3/8 UNF Inverted x 1/8 BSP
M10 x 1.0 Inverted x 1/8 BSP
M12 x 1.0 Inverted x 1/8 BSP
Z
Z
Z
Code
Description
Material
MM-02-02
1/8 BSP x 1/8 BSP
Z
14
Bulkhead Tee
Code
Point A
Point B
Point C
Material
834-3D
834-3HC
834-3Z
3/8 JIC
3/8 JIC
3/8 JIC
3/8 JIC
3/8 JIC
3/8 JIC
3/8 JIC
3/8 JIC
3/8 JIC
D
HC
Z
Banjo Adaptor
JIC (AN) Welded Boss
For Series 2 Banjo Bolts
Code
Description
A150-3D
To suit Bolt Ø 3/8 UNF,
M10 & 1/8 BSP
M10 & 1/8 BSP
M10 & 1/8 BSP
To suit Bolt Ø M12
To suit Bolt Ø M12
To suit Bolt Ø M12
To suit Bolt Ø 7/16 UNF
To suit Bolt Ø 7/16 UNF
A150-3HC
A150-3Z
A152-3D
A152-3HC
A152-3Z
A157-3HC
A157-3Z
Material
D
HC
Z
D
HC
Z
HC
Z
Code
Description
Material
WB-03JD
WB-04JD
WB-06JD
WB-08JD
WB-10JD
WB-12JD
WB-16JD
-3 Welded Boss
-4 Welded Boss
-6 Welded Boss
-8 Welded Boss
-10 Welded Boss
-12 Welded Boss
-16 Welded Boss
D
D
D
D
D
D
D
Banjo Bolts, Metric Thread
Banjo Adaptors, Double Thread JIC (AN)
To suit Metric Bolts
Code
Thread
Banjo Ø
Material
BJD6J-14MD
-6 JIC (AN)
14mm
D
Code
Thread
BB1210MD
BB1212MD
BB1215MD
BB1415MD
BB1415LMD
BB1415DMD
BB1615MD
BB1615LMD
BB1815MD
M12
M12
M12
M14
M14
M14
M16
M16
M18
x
x
x
x
x
x
x
x
x
1.00
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.50
Length
Banjo Ø Material
Standard
Standard
Standard
Standard
Extended
Extended (Double Bolt)
Standard
Extended
Standard
12mm
12mm
12mm
14mm
14mm
14mm
16mm
16mm
18mm
D
D
D
D
D
D
D
D
D
15
411 Series – Adaptors: Calliper, Clutch and other applications
Metric x JIC Male Adaptors
BSP x JIC Male Adaptors
Code
Metric Thread
JIC Thread
Material
Code
BSP Thread
JIC Thread
Material
MM6J-121MD
MM6J-122MD
MM6J-125MD
MM6J-125MZ
MM-06J-14M
MM6J-14MZ
MM6J-16MD
MM6J-16MZ
M12
M12
M12
M12
M14
M14
M16
M16
x
x
x
x
x
x
x
x
1.00
1.25
1.50
1.50
1.50
1.50
1.50
1.50
-6
-6
-6
-6
-6
-6
-6
-6
JIC
JIC
JIC
JIC
JIC
JIC
JIC
JIC
D
D
D
Z
D
Z
D
Z
MM4-6JD
MM4-6JZ
MM4-8JD
MM4-8JZ
MM6-6JD
MM6-6JZ
MM6-8JD
MM6-8JZ
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
BSP
BSP
BSP
BSP
BSP
BSP
BSP
BSP
-6
-6
-8
-8
-6
-6
-8
-8
JIC
JIC
JIC
JIC
JIC
JIC
JIC
JIC
D
Z
D
Z
D
Z
D
Z
MM6J-18MD
MM6J-18MZ
MM6J-24MD
MM8J-14MD
MM8J-14MZ
MM8J-16MD
MM8J-16MZ
MM8J-18MD
MM8J-18MZ
MM10J-16MD
MM10J-16MZ
MM10J-18MD
M18
M18
M24
M14
M14
M16
M16
M18
M18
M16
M16
M18
x
x
x
x
x
x
x
x
x
x
x
x
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
-6 JIC
-6 JIC
-6 JIC
-8 JIC
-8 JIC
-8 JIC
-8 JIC
-8 JIC
-8 JIC
-10 JIC
-10 JIC
-10 JIC
D
Z
D
D
Z
D
Z
D
Z
D
Z
D
MM6-10JD
MM6-10JZ
MM8-8JD
MM8-8JZ
MM8-10JD
MM8-10JZ
MM8-12JD
MM8-12JZ
MM10-10JD
MM10-10JZ
MM10-12JD
MM10-12JZ
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
BSP
BSP
BSP
BSP
BSP
BSP
BSP
BSP
BSP
BSP
BSP
BSP
-10 JIC
-10 JIC
-8 JIC
-8 JIC
-10 JIC
-10 JIC
-12 JIC
-12 JIC
-10 JIC
-10 JIC
-12 JIC
-12 JIC
D
Z
D
Z
D
Z
D
Z
D
Z
D
Z
MM10J-18MZ
MM10J-20MD
MM10J-20MZ
MM10J-22MD
MM10J-22MZ
MM10J-24MD
MM12J-18MD
MM12J-20MD
MM12J-22MD
MM12J-24MD
M18
M20
M20
M22
M22
M24
M18
M20
M22
M24
x
x
x
x
x
x
x
x
x
x
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
-10
-10
-10
-10
-10
-10
-12
-12
-12
-12
Z
D
Z
D
Z
D
D
D
D
D
MM12-12JD
MM12-12JZ
3/4 BSP
3/4 BSP
-12 JIC
-12 JIC
D
Z
JIC
JIC
JIC
JIC
JIC
JIC
JIC
JIC
JIC
JIC
Banjo Adaptor, JIC (AN) Thread
To suit Metric Bolts
Banjo Adaptor, Double
Code
Description
Material
A151-3D
A151-3HC
A151-3Z
Double Banjo Adaptor -3 JIC
D
HC
Z
Code
Thread
Banjo Ø
Material
BJA4J-12MD
BJA6J-12MD
BJA6J-14MD
BJA6J-16MD
BJA8J-14MD
BJA8J-16MD
-4
-6
-6
-6
-8
-8
12mm
12mm
14mm
16mm
14mm
16mm
D
D
D
D
D
D
JIC
JIC
JIC
JIC
JIC
JIC
(AN)
(AN)
(AN)
(AN)
(AN)
(AN)
16
Better Plumbing. Better Performance.
>55 %@3?/5 >+5 715/. %/+=<
/;8<9+-/ %=B5/ 3995/
>==/;
&3&/-2 !=2/; ><=86 78.3C/.
373<2/< ?+35+,5/
;+3./.
%=+375/<< %=//5
" 8</
87=8>;/.
7=;+7-/< 08;
A-/55/7= 58@
5/A3,5/
% "&
8</
;+63. 3,/; ;+3.
95B 87<=;>-=387
&312= /7. $+.3><
312 889 %=;/71=2
312 (+->>6
&/69 $+=/.
%
8</ @3=2
5+-4 % !>=/; 8+=371
=8 $/<3<= ,;+<387
#>3-4 3<-877/-=
8>95371< @3=2 &;395/ +=-2
371/; %7+9 58<>;/<
Get the Conne ion.
™
5+6<2/55 %=B5/
#>3-4 3<-877/-= 8>95371
+<= %6+;= %/->;/
) 7 37/ 35=/;
8.>5+; <8 -2+71371 03==371< 3< /+<B
78.3C/. +5>637>6 ,8.B
D .3+6/=/; +A 5/71=2 D
'</
/7. 03==371< =2;>
8; 5+6<2/55 %=B5/
#>3-4 3<-877/-= 8>95371< -+55 08; <3C/<
3==371< +?+35+,5/ @3=2 89=387+5 0/6+5/
+--/<<8;B 98;= 87 =2/ 375/= <3./
08; =/69 9;8,/< /=-
"5/+=/.
<=+375/<< /5/6/7=
<: 37 035=/;371 +;/+
8;
63-;87 <-;//7<
&89 #>+53=B +;,>;/=8; 3=<
/687 855/B ;+<@/55 # &
8;1/. %@/9= &>,/ 8./5<
288</ ;86 $/. 5>/
5+-4 8; %>9/; 3-4/5
7. 3==371<
!9=387+5 9<3
9;/<<>;/ .300/;/7=3+5
;/53/0 ?+5?/
/+?B .>=B -8;/<
+5<8 +?+35+,5/
AWAITING
NEW XRP
CAT IMAGE.
®
THE
REQUEST AN XRP
CATALOGUE FROM JLS
XTREME IN RACECAR PLUMBING
Are the European
Master Distributors 17
AH02 Series – Hose
The Leno Mesh Layer:
Embeds into the hose wall during the curing
process, trapping the reinforcing braid and
forming an extra-strength bond.
The Middle Layer:
A partial stainless reinforcing braid, embedded in
the tube wall, resists pullout and vacuum collapse
while increasing pressure capability.
Beware of lesser quality
hose with poor adhesion or
weaker textile inner braid.
There is a difference.
The Outer Layer:
A high tensile stainless steel outer braid
with superior adhesion provides maximum
pressure capability, abrasion protection
and ease of assembly.
The Inner Layer:
High temp seamless CPE synthetic
elastomer inner tube.
Manufactured using
aerospace Rigid
Mandrel Technology.
Type AH02 Rubber/Stainless Braided Racing Hose
AH02 series hose is an extremely flexible full competition race
hose. Externally the hose is protected from abrasion and corrosion
by its 304 HC outer braiding. The compact nature of the braid
construction ensures a tight bend radius, an important feature
often demanded by many motorsport applications. Its high grade
synthetic rubber innercore provides excellent compatibility with
fuels, oils, coolants, lubricants, hydrocarbons and alcohol’s.
• Inner Core: Seamless synthetic Rubber compound
A large selection of end fittings are available for AH02 hose,
details of which can be found on the following pages.
• Due to continual hose development specification
may vary from above
• Re-enforcement: Stainless Steel wire braid consisting of partial
inner braid & full cover outer braiding to AISI 304
• Temperature Range: -54°C to +150°C (-65°F to 300°F)
• Fittings: Re-usable
• Applications: Fuel, Oil & Coolant Systems
Also available to suit all hose is our “XRP Fire Sleeve” for
added protection against heat and abrasive surfaces.
Code
Internal Diameter (mm) Outside Diameter (mm)
Operation G Pressure (mm) Min. Burst Pressure E (PSI)
Minimum Bend Radius (mm)
Weight (g/m)
AH02-04
AH02-06
AH02-08
AH02-10
AH02-12
AH02-16
AH02-20
5.5
9
11
14
17.5
22
29
1000
1000
1000
1000
1000
750
500
50
65
90
100
115
140
200
169
230
250
305
420
560
720
11.6
14.5
16.8
20.8
24.3
29.7
36.8
6000
6000
5000
5000
4000
3000
2000
18
AH02 Series – Hose Fittings
2024 aluminium alloy swivel nuts
and cutters T851 heat-treated for
longer life.
Exclusive massive double angled seat area
provides line contact sealing. Eliminates
torque-induced cracking common to
lightweight flared tube designs.
Stainless steel lock wires,
dry film lubed with moly to
prevent galling.
Our exclusive dual radial
Viton O-Ring seals.
(Seals #2 and #3)
Recessed area on
nipple for truer fit.
Tapered nipple is
easy to assemble.
(Seal #1)
Piloted nipple and cutter keeps hose
concentric to cutter for a better seal.
Cutter and nipple
separates wire braid for
maximum hose retention.
XRP Performance Hose Fittings
XRP Performance Alloy Hose Fittings are manufactured in the USA
to a design based upon the aerospace ‘cutter’ format. This style of
fitting was designed by the Aircraft & Military Industries to ensure
perfect sealing when the fitting is assembled and also to prevent
‘blow off’ when a hose assembly is working under full pressure.
The fittings are manufactured from specially heat treated 2024T851 (to QQA225/6) and 6061-T651 (to QQA225/8) alloys.
6061-T651 aluminium sockets
prevent stress cracking.
US Patent No 5,340,168.
• Swivel nuts & cutters manufactured from 2024 Aluminium
Alloy specially heat treated to T851 to provide higher
strength thread durability while minimising cutter collapse
• Cutter & nipple design separates wire braid gripping
area from the lip seal to provide maximum hose retention
and sealing
• Exclusive Dual Viton 'O'-Ring seals for fail safe sealing
and adjustability
XRP Dual Sealing adjustable alloy hose fittings are the optimum
choice for the professional motorsport team. They are manufactured
from the same high specification alloys and possess all the same
features as the XRP standard range, but Dual Sealing fittings
incorporate an exclusive two stage Viton ‘O’-Ring sealing design.
When a hose assembly is made using Dual Sealing fittings, full
360° adjustability is available without fluid seepage that sometimes
occurs in other adjustable fitting designs.
• Piloted nipple & cutter reduces wobble and prevent uneven
cutting of the hose wall during assembly
The XRP Dual Sealing System is available in swept fittings (45°
through to 180°) and also in block forged (45° and 90°).
• Sockets manufactured from 6061-T651 Aluminium
to prevent stress cracking
• Stainless Steel lock wires, dry film lubed with moly
to prevent galling
• Recessed area on nipple to allow easier disassembly
and maximum reusability of hose ends
• Tapered nipple design to ease assembly and prevent
cutting of the hose bore
19
Performance Hose Ends
Straight
XRP Performance Hose Ends are designed with the aviation nipple
and cutter design, to prevent blow off and leakage problems that
can be encountered by other styles of hose ends when assembled
with stainless steel braided hose. To many top race teams, no other
style is acceptable. XRP Performance Hose Ends are manufactured
from specially heat treated 2024-T851 aluminium per QQA225/6 and 6061-T651 aluminium per QQA-225/8 as specified
for these hose fittings. Manufactured in XRP’s facility in the U.S.A.,
every Performance Hose End is race-ready when it reaches our
customers. All hose ends are aluminium unless otherwise noted.
All hose ends are JIC 37˚. Hose assemblies consisting of two
angled non-swivel hose ends must be orientated to the correct
angular position during hose assembly. Double swivel hose ends
allow for angular orientation after hose assembly. Compatible
with XRP Stainless Steel CPE race hose and XR-31 hose.
Anodized
Super Nickel Ti Tech
130004(Steel)*
100004
100006
100008
100010
100012
100016
100020
100011
100013
100017
–
100004SN
100006SN
100008SN
100010SN
100012SN
100016SN
100020SN
100011SN
100013SN
100017SN
130004TT(Steel)¬
100004TT
100006TT
100008TT
100010TT
100012TT
100016TT
100020TT
100011TT
100013TT
100017TT
Black
Dash Size
–
100004BB
100006BB
100008BB
100010BB
100012BB
100016BB
100020BB
100011BB
100013BB
100017BB
4
4
6
8
10
12
16
20
12 hose to 10 nut
12 hose to 16 nut
16 hose to 12 nut
*All -4 steel hose ends have nickel plated steel bodies with red aluminium sockets.
¬ These are nickel plated steel fittings with black anodized nut and ti-tech sockets.
Double Swivel, Triple Sealed Hose Ends
Call for details
& availability
Patented aviation-style nipple and cutter design, to prevent blow off and leakage. Triple
sealed. Design allows for full angular positioning after assembly – see illustration US Patent
No 5,340,168 on page 19. Fittings are available in anodized aluminium, Super Nickel
finish, Black anodized and Ti-Tech finishes – SIMPLY THE BEST. These fittings feature the
latest in racing plumbing. All hose ends are JIC 37˚. Custom ends and metrics are available,
compatible with XRP’s Stainless Steel CPE race hose and XR-31 hose.
30˚
120˚
60˚
Anodized
Super Nickel
Dash Size
Anodized
Super Nickel
Dash Size
Anodized
Super Nickel
Dash Size
103004**
203006
203008
203010
203012
203016
103020**
103004SN**
203006SN
203008SN
203010SN
203012SN
203016SN
103020SN**
4
6
8
10
12
16
20
106004**
206006
206008
206010
206012
206016
106020**
106004SN**
206006SN
206008SN
206010SN
206012SN
206016SN
106020SN**
4
6
8
10
12
16
20
112004**
212006
212008
212010
212012
212016
112020**
112004SN**
212006SN
212008SN
212010SN
212012SN
212016SN
112020SN**
4
6
8
10
12
16
20
45˚
150˚
90˚
Anodized
Super Nickel
Dash Size
Anodized
Super Nickel
Dash Size
Anodized
Super Nickel
Dash Size
104504**
204506
204508
204510
204512
204516
104520**
204511
204513
204517
104504SN**
204506SN
204508SN
204510SN
204512SN
204516SN
104520SN**
204511SN
204513SN
204517SN
4
6
8
10
12
16
20
12 hose to 10 nut
12 hose to 16 nut
16 hose to 12 nut
109004**
209006
209008
209010
209012
209016
109020**
209011
209013
209017
109004SN**
209006SN
209008SN
209010SN
209012SN
209016SN
109020SN**
209011SN
209013SN
209017SN
4
6
8
10
12
16
20
12 hose to 10 nut
12 hose to 16 nut
16 hose to 12 nut
115004**
215006
215008
215010
215012
215016
115020**
115004SN**
215006SN
215008SN
215010SN
215012SN
215016SN
115020SN**
4
6
8
10
12
16
20
180˚ See Page 21
**All size 4 and 20 hose ends are non-swivel.
Technical information on XR-31 hose can be found on page 22 or www.jlsmotorsport.com and follow the XRP link.
20
www.jlsmotorsport.com
These reusable nipple-and-cutter style hose ends are compatible with our Stainless Steel CPE race hose and XR-31 hose. XR-31 looks especially
handsome when paired with either our Ti-Tech finish (with the look of titanium) or our black anodized end fittings. All the hose ends shown
are also available in RED/BLUE anodized aluminium and super nickel finish. SIMPLY THE BEST. All hose ends are JIC 37˚, triple sealed and
double swivel to allow for full angular positioning after assembly. Huge double-angled seat area provides line contact sealing and eliminates
torque-induced cracking common to lightweight flared tube designs. 2024 aluminium alloy swivel nuts
and cutters are T851 heat-treated for longer life. 6061-T651 aluminium sockets prevent stress cracking.
30˚
120˚
60˚
Ti Tech
Black
Dash Size
Ti Tech
Black
Dash Size
Ti Tech
Black
Dash Size
133004TT(steel)¬
103004TT**
203006TT
203008TT
203010TT
203012TT
203016TT
–
103004BB**
203006BB
203008BB
203010BB
203012BB
203016BB
4
4
6
8
10
12
16
136004TT(steel)¬
106004TT**
206006TT
206008TT
206010TT
206012TT
206016TT
–
106004BB**
206006BB
206008BB
206010BB
206012BB
206016BB
4
4
6
8
10
12
16
112004TT(steel)¬
112004TT**
212006TT
212008TT
212010TT
212012TT
212016TT
–
112004BB**
212006BB
212008BB
212010BB
212012BB
212016BB
4
4
6
8
10
12
16
103020TT**
103020BB**
20
106020TT**
106020BB**
20
112020TT**
112020BB**
20
45˚
150˚
90˚
Ti Tech
Black
Dash Size
Ti Tech
Black
Dash Size
Ti Tech
Black
Dash Size
134504TT(steel)¬
104504TT**
204506TT
204508TT
204510TT
204512TT
204516TT
104520TT**
204511TT
204513TT
204517TT
–
104504BB**
204506BB
204508BB
204510BB
204512BB
204516BB
104520BB**
204511BB
204513BB
204517BB
4
4
6
8
10
12
16
20
12 hose to 10 nut
12 hose to 10 nut
16 hose to 10 nut
139004TT(steel)¬
109004TT**
209006TT
209008TT
209010TT
209012TT
209016TT
109020TT**
209011TT
209013TT
209017TT
–
109004BB**
209006BB
209008BB
209010BB
209012BB
209016BB
109020BB**
209011BB
209013BB
209017BB
4
4
6
8
10
12
16
20
12 hose to 10 nut
12 hose to 10 nut
16 hose to 10 nut
131504TT(steel)¬
115004TT**
215006TT
215008TT
215010TT
215012TT
215016TT
115020TT**
–
115004BB**
215006BB
215008BB
215010BB
215012BB
215016BB
115020BB**
4
4
6
8
10
12
16
20
180˚
XRP Hose Ends,
the Latest in High
Performance
Fluid Delivery.
180˚
Anodized
Super Nickel
Dash Size
118004**
218006
218008
218010
218012 (Std)
218512 (Short)
218016
118020**
118004SN**
218006SN
218008SN
218010SN
218012SN
218512SN
218016SN
118020SN**
4
6
8
10
12†
12†
16
20
† Standard radius is 1-1⁄2" Short radius is 1"
Dual Angled Seats
The Latest in Fluid Delivery
Patented Nipple & Cutter Design
Ti Tech
Black
Dash Size
131804TT(steel)¬
118004TT**
218006TT
218008TT
218010TT
218012TT
218016TT
118020TT**
–
118004BB**
218006BB
218008BB
218010BB
218012BB
218016BB
118020BB**
4
4
6
8
10
12
16
20
**All size 4 and 20 hose ends are non-swivel.
¬ These are nickel plated steel fittings with black anodized nut and ti-tech sockets.
Call for details & availability
www.pirtek.co.uk
21
XRP Hose Finishers
XRP anodized aluminium hose finishers add
cosmetic appeal to your engine. A unique
design ensures a secure placement of the
worm gear clamp. Machined from the finest
aluminium alloy, our hose finishers are
available in three anodized aluminium colors
and our new super nickel finish. Hose
finishers are supplied with a stainless steel
worm gear clamp pre-installed.
RED
BLUE
SUPER NICKEL
BLACK
Hose Size
I.D.
Hex
Hex
Hex
Hex
4
6
8
10
12
14
16
1
⁄2"
⁄8"
11
⁄16"
7
⁄8"
1"
1-1⁄8"
1-3⁄16"
550104
550106
550108
550110
550112
550114
550116
550204
550206
550208
550210
550212
550214
550216
550304
550306
550308
550310
550312
550314
550316
550404
550406
550408
550410
550412
550414
550416
5
XR-31 Lightweight Performance Hose
Tough, lightweight XR-31 hose is a sure bet for racers and street performance enthusiasts.
It’s versatile, flexible, easy to cut and assemble with a number of attractive characteristics
including: excellent temperature resistance -40˚C to 148˚C (-40˚F to +300˚F), high tube
strength, tight bend radius capable for tight engine compartments. 3-ply construction
consists of full coverage Nylon-bonded outer braid for abrasion-resistance, partial
coverage embedded braid middle layer, and CPE synthetic rubber inner tube for great
flow and high-temperature resistance. XR-31 hose is made in the U.S.A. XR-31 offers
a significant weight-savings over stainless steel braided hose.
Because today’s fuels can contain
a wide variety of unpublished additives,
it is not possible for us to accurately
predict compatibility of the inner liner
of XR-31 hose with any specific fuel.
We recommend our HS-79 PTFE-lined
hose, if in doubt. XR-31 hose is not
compatible with brake fluid.
NHRA Accepted Woven Hose
XR-31 3-PLY Construction
Size
4
6
8
10
12
16
20
Hose I.D.
(Inches)
7
⁄32"
11
⁄32"
7
⁄16"
9
⁄16"
11
⁄16"
7
⁄8"
1-1⁄8"
Bulk Hose •
(mm)
5.6
8.75
11.1
14.3
17.5
22.25
28.6
INNER LAYER: FAST FLOWING
CPE SYNTHETIC RUBBER TUBE
-40 TO +300F TEMP. RANGE
(specify length)
3104-00
3106-00
3108-00
3110-00
3112-00
3116-00
3120-00
MIDDLE LAYER:
EMBEDDED
BRAID
OUTER LAYER: FULL COVERAGE NYLON OUTER BRAID. ABRASION-RESISTANT
AND EXTREMELY FLEXIBLE FOR LONG LIFE AND EASE OF INSTALLATION
Technical Specifications – Temperature Range:
Size
Hose I.D.
(Inches) (mm)
Hose O.D.
(Inches) (mm)
Max Operating Pressure
(PSI) (Bar)
Burst Pressure
(PSI)
(Bar)
Weight
(Ft/Lbs) (Kg/m)
Minimum Bend Radius
(Inches)
(mm)
4
6
8
10
12
16
20
0.22"
0.35"
0.44"
0.57"
0.69"
0.88"
1.125"
0.44"
0.56"
0.67"
0.82"
0.96"
1.15"
1.437"
500
500
500
500
350
350
350
2000
2000
2000
2000
1400
1400
1400
0.075
0.095
0.120
0.155
0.250
0.320
0.320
2.00"
2.50"
3.50"
4.00"
4.50"
5.50"
8.00"
22
5.6
8.9
11.2
14.5
17.5
22.4
28.6
11.2
14.25
17.0
20.8
24.4
29.2
36.5
34
34
34
34
23.8
23.8
23.8
136
136
136
136
95
95
95
0.111
0.141
0.178
0.230
0.371
0.476
0.476
50.8
63.5
88.9
101.6
114.3
139.7
203.2
Call for details & availability
Aluminium Adapter Fittings
XRP offers the industry’s most extensive inventory of popular adapter fittings for race cars, street performance vehicles and watercraft. All male
flare adapters are JIC 37˚. Most adapter fittings are also available in both steel and stainless. To order steel – change the first digit of the
part number from a “9” to a “4” EXAMPLE: 981606 changes to 481606. To order stainless – change the first digit of the part number from
a “9” to a “5” EXAMPLE: 981606 changes to 581606.
804
806
814
Uses
924 nut,
not included
814 IHP
Uses O-ring, crush washer or
Stat-O-Seal, not included
Size
Flare Bulkhead
Tee On Run
Red
Flare Plug
Super Nickel
Black
3
4
6
8
10
980403
980404
980406
980408
980410
980603
980604
980606
980608
980610
980603SN
980604SN
980606SN
980608SN
980610SN
980603BB
980604BB
980606BB
980608BB
980610BB
981403
981404
981406
981408
981410
12
16
20
980412
980416
980420
980612 980612SN 980612BB
980616 980616SN 980616BB
980620 980620SN 980620BB
981412
981416
981420
818*
FKM O-ring included
Straight Thread Port Plug
Blue
Black
Internal Hex
Port Plug
Blue
981403BB
981404BB
981406BB
981408BB
981410BB
IHP003
IHP004
IHP006
IHP008
IHP010
981503
981504
981506
981508
981510
981412BB
981416BB
981420BB
IHP012
IHP016
IHP020
981512 981512SN 981512BB
981516 981516SN 981516BB
981520 981520SN 981520BB
819*
Use with
819 sleeve
Size
Blue
Tube Nut
Super Nickel
Black
Tube Size
Blue
3
981803
981803SN
981803BB
3
⁄16"
4
5
6
8
10
12
16
20
981804
981805
981806
981808
981810
981812
981816
981820
981804SN
981805SN
981806SN
981808SN
981810SN
981812SN
981816SN
981820SN
981804BB
981805BB
981806BB
981808BB
981810BB
981812BB
981816BB
981820BB
1
⁄4"
5
⁄16"
3
⁄8"
1
⁄2"
5
⁄8"
3
⁄4"
1"
1-1⁄4"
824
815
Tube Sleeve
Super Nickel
Blue
Flared Tees
Super Nickel
Black
3
4
6
8
10
12
16
20
982403
982404
982406
982408
982410
982412
982416
982420
982403SN
982404SN
982406SN
982408SN
982410SN
982412SN
982416SN
982420SN
982403BB
982404BB
982406BB
982408BB
982410BB
982412BB
982416BB
982420BB
Pipe Size
(inches) Blue
⁄8"
1
⁄8"
1
⁄4"
3
⁄8"
1
⁄2"
3
⁄4"
1"
1-1⁄4"
1
982503
982504
982506
982508
982510
982512
982516
982520
981503SN
981504SN
981506SN
981508SN
981510SN
981503BB
981504BB
981506BB
981508BB
981510BB
821
Use with
818 nut
90˚ Flare Union
Super Nickel Black
Black
Blue
981903 981903SN
981903BB
982103 982103SN
982103BB
981904
981905
981906
981908
981910
981912
981916
981920
981904BB
981905BB
981906BB
981908BB
981910BB
981912BB
981916BB
981920BB
982104
–
982106
982108
982110
982112
982116
982120
982104BB
–
982106BB
982108BB
982110BB
982112BB
982116BB
982120BB
981904SN
981905SN
981906SN
981908SN
981910SN
981912SN
981916SN
981920SN
825
Size
Male Flare Union
Super Nickel Black
826
Male Branch Tee
Super Nickel
Black
982503SN
982504SN
982506SN
982508SN
982510SN
982512SN
982516SN
982520SN
www.pirtek.co.uk
982104SN
–
982106SN
982108SN
982110SN
982112SN
982116SN
982120SN
982503BB
982504BB
982506BB
982508BB
982510BB
982512BB
982516BB
982520BB
Pipe Size
(inches)
Blue
Male Run Tee
Super Nickel
Black
⁄8"
1
⁄8"
1
⁄4"
3
⁄8"
1
⁄2"
3
⁄4"
1"
1-1⁄4"
982603
982604
982606
982608
982610
982612
982616
982620
982603SN
982604SN
982606SN
982608SN
982610SN
982612SN
982616SN
982620SN
982603BB
982604BB
982606BB
982608BB
982610BB
982612BB
982616BB
982620BB
1
23
Aluminium Adapter Fittings Continued
832
833
Uses
924 nut.
Not included
834
837
Uses
924 nut.
Not included
Uses
924 nut.
Not included
Uses
924 nut.
Not included
Size
Blue
Flare Bulkheads
Super Nickel
Black
90˚ Flare
Bulkhead
Flare
Bulkhead Tee
45˚ Flare
Bulkhead
3
4
6
8
10
12
16
20
983203
983204
983206
983208
983210
983212*
983216*
983220
983203SN
983204SN
983206SN
983208SN
983210SN
983212SN
983216SN
983220SN
983203BB
983204BB
983206BB
983208BB
983210BB
983212BB
983216BB
983220BB
983303
983304
983306
983308
983310
983312
983316
983320
983403
983404
983406
983408
983410
983412
983416
983420
983703
983704
983706
983708
983710
983712
983716
983720
*Special -16 bulkhead to -12 AN flare also available, order 983217.
Male Flare To NPT Pipe Adapters
816
822
823
Flare
Size
Pipe
Size
Blue
Straights
Super Nickel
Black
Blue
90˚
Super Nickel
Black
Blue
45˚
Super Nickel
Black
3
1
⁄8"
981603
981603SN
981603BB
982203
982203SN
982203BB
982303
982303SN
982303BB
3
3
4
4
4
6
6
6
6
1
⁄4"
⁄8"
1
⁄8"
1
⁄4"
3
⁄8"
1
⁄8"
1
⁄4"
3
⁄8"
1
⁄2"
981634
981636
981604
981644
981646
981662
981606
981666
981668
981634SN
981636SN
981604SN
981644SN
981646SN
981662SN
981606SN
981666SN
981668SN
981634BB
981636BB
981604BB
981644BB
981646BB
981662BB
981606BB
981666BB
981668BB
982234
982236
982204
982244
982246
982262
982206
982266
982268
982234SN
982236SN
982204SN
982244SN
982246SN
982262SN
982206SN
982266SN
982268SN
982234BB
982236BB
982204BB
982244BB
982246BB
982262BB
982206BB
982266BB
982268BB
982334
982336
982304
982344
982346
982362
982306
982366
982368
982334SN
982336SN
982304SN
982344SN
982346SN
982362SN
982306SN
982366SN
982368SN
982334BB
982336BB
982304BB
982344BB
982346BB
982362BB
982306BB
982366BB
982368BB
8
8
8
8
10
10
10
10
12
12
12
16
16
20
20
⁄4"
⁄8"
1
⁄2"
3
⁄4"
1
⁄4"
3
⁄8"
1
⁄2"
3
⁄4"
1
⁄2"
3
⁄4"
1"
3
⁄4"
1"
1"
1-1⁄4"
981607
981608
981688
981609
981699
981611
981610
981613
981614
981612
981615
981617
981616
981621
981620
981607SN
981608SN
981688SN
981609SN
–
981611SN
981610SN
981613SN
981614SN
981612SN
981615SN
981617SN
981616SN
981621SN
981620SN
981607BB
981608BB
981688BB
981609BB
–
981611BB
981610BB
981613BB
981614BB
981612BB
981615BB
981617BB
981616BB
981621BB
981620BB
982207
982208
982288
982209
–
982211
982210
982213
982214
982212
982215
982217
982216
982221
982220
982207SN
982208SN
982288SN
982209SN
–
982211SN
982210SN
982213SN
982214SN
982212SN
982215SN
982217SN
982216SN
982221SN
982220SN
982207BB
982208BB
982288BB
982209BB
–
982211BB
982210BB
982213BB
982214BB
982212BB
982215BB
982217BB
982216BB
982221BB
982220BB
982307
982308
982388
982309
–
982311
982310
982313
982314
982312
982315
982317
982316
982321
982320
982307SN
982308SN
982388SN
982309SN
–
982311SN
982310SN
982313SN
982314SN
982312SN
982315SN
982317SN
982316SN
982321SN
982320SN
982307BB
982308BB
982388BB
982309BB
–
982311BB
982310BB
982313BB
982314BB
982312BB
982315BB
982317BB
982316BB
982321BB
982320BB
24
3
1
3
All male flare adapters are JIC 37˚. Most adapter fittings are also available in steel and stainless. Some are available in black, to coordinate
with Ti-Tech hose ends with the look of titanium and our new XR-31 hose. To order steel – change the first digit of the part number from a “9”
to a “4” EXAMPLE: 981606 changes to 481606. To order stainless – change the first digit of the part number from a “9” to a “5” EXAMPLE:
981606 changes to 581606.
910
911
917
Pipe
Size
Female
Pipe Coupling
Female
Pipe Nipple
Female
Pipe Tee
Pipe Bushing
Reducer
⁄8"
1
⁄4"
3
⁄8"
1
⁄2"
3
⁄4"
1"
1-1⁄4"
991001
991002
991003
991004
991006
991007
991008
991101
991102
991103
991104
991106
991107
991108
991701
991702
991703
991704
991706
991707
991708
991201
991202
991203
991204
991205
991206
991207
991208
991209
991210
991211
991212
1
919
912
Male to Female
⁄4"
3
⁄8"
3
⁄8"
1
⁄2"
1
⁄2"
1
⁄2"
3
⁄4"
3
⁄4"
3
⁄4"
1"
1"
1"
1
⁄8"
1
⁄4"
1
⁄8"
3
⁄8"
1
⁄4"
1
⁄8"
1
⁄2"
3
⁄8"
1
⁄4"
1
⁄4"
⁄2"
3
⁄8"
3
1
Call for details
& availability
932
929
924
Flare
Reducer
Size
991902
991903
991904
991905
991906
991907
991908
991909
991911
991912
991913
991914
991915
991916
991918
991919
991920
991929
991922
991923
991925
991926
4 to 3
4 to 5
5 to 3
6 to 3
6 to 4
6 to 5
8 to 4
8 to 3
8 to 5
8 to 6
10 to 4
10 to 6
10 to 8
12 to 4
12 to 6
12 to 8
12 to 10
16 to 8
16 to 10
16 to 12
20 to 12
20 to 16
938
Pipe Allen Socket Plug
Size Blue
Black
Size Blue
⁄16"
⁄8"
1
⁄4"
3
⁄8"
1
⁄2"
3
⁄4"
1"
1-1⁄4"
3
4
6
8
10
12
16
20
1
1
993201
993202
993203
993204
993205
993206
993207
993208
993201BB
993202BB
993203BB
993204BB
993205BB
993206BB
993207BB
993208BB
992403
992404
992406
992408
992410
992412
992416
992420
Bulkhead Nuts
Super Nickel
Black
992403SN
992404SN
992406SN
992408SN
992410SN
992412SN
992416SN
992420SN
992403BB
992404BB
992406BB
992408BB
992410BB
992412BB
992416BB
992420BB
37˚ Flare Cap Female
Super Nickel Black
Thread Size
Blue
⁄8"-24
⁄16"-20
9
⁄16"-18
3
⁄4"-16
7
⁄8"-14
1-1⁄16"-12
1-5⁄16"-12
1-5⁄8"-12
992903
992904
992906
992908
992910
992912
992916
992920
3
7
www.pirtek.co.uk
992903SN
992904SN
992906SN
992908SN
992910SN
992912SN
992916SN
992920SN
992903BB
992904BB
992906BB
992908BB
992910BB
992912BB
992916BB
992920BB
Female STRT Thread
AN Tee O-Ring Boss
993803
993804
993806
993808
993810
993812
993816
993820
25
Special 37˚ JIC Adapters & Fittings
Tee Male Flare to
Female Swivel On Run
Tee Male Flare to
Female Swivel On Side
45˚ Female Swivel to Male Flare
Part No.
Thread Size
Part No.
Thread Size
Size
45˚ Tube
45˚ Forged
900233
900203
900204
900206
900208
900210
3 (Steel)
3 (Alum)
4
6
8
10
900333
900303
900304
900306
900308
900310
3 (Steel)
3 (Alum)
4
6
8
10
3 (Steel)
4 (Steel)
3 (Alum)
4
6
8
–
–
–
920404
920406
920408
900433
900444
900403
900404
900406
900408
900212
900216
12
16
900312
900316
12
16
10
12
16
20
920410
920412
920416
920420
900410
900412
900416
900420
90˚ female swivel
to male flare
Swivel Pipe Adapters Steel and Aluminium
Straight
An Size
90˚ Tube
90˚ Forged
3 (Steel)
4 (Steel)
3 (Alum)
4
6
8
10
12
16
20
---920504
920506
920508
920510
920512
920516
920520
900533
900544
900503
900504
900506
900508
900510
900512
900516
900520
26
45˚ female flare
to male pipe
45˚ male flare
to male pipe
90˚ female flare
to male pipe
90˚ male flare
to male pipe
Straight Fem.
Flare To Pipe
45˚ Female
Flare To Pipe
45˚ Male
Flare To Pipe
90˚ Female
Flare To Pipe
90˚ Male
Flare To Pipe
AN
Size
NPT Size
(inches)
900631 (Steel)
900603
900641 (Steel)
900604
900644
900606
900662
900666
900667
900608
900688
900610
900611
900612
900614
910731 (Steel)
910703
910741 (Steel)
910704
910744
910706
910762
910766
910767
910708
910788
910710
910711
910712
910714
910831 (Steel)
910803
910841 (Steel)
910804
910844
910806
910862
910866
910867
910808
910888
910810
910811
910812
910814
900731 (Steel)
900703
900741 (Steel)
900704
900744
900706
900762
900766
900767
900708
900788
900710
900711
900712
900714
900831 (Steel)
900803
900841 (Steel)
900804
900844
900806
900862
900866
900867
900808
900888
900810
900811
900812
900814
3
3
4
4
4
6
6
6
8
8
8
10
10
12
12
1
⁄8"
⁄8"
1
⁄8"
1
⁄8"
1
⁄4"
1
⁄4"
1
⁄8"
3
⁄8"
1
⁄4"
3
⁄8"
1
⁄2"
1
⁄2"
3
⁄8"
3
⁄4"
1
⁄2"
1
Carburettor Adapters & Fittings
Double Swivel Hose Ends For Metric
Carburettor Kits
Bump Tube Adapters Aluminium and Steel
Size
Part No.
Description
Part No. Aluminium
Thread W/O-Ring
Size
Part No. Steel
6
6
289125
289150
M12 X 1.25 SOLEX
M12 X 1.50 WEBER
791415
791615
791815
M14 x 1.5
M16 x 1.5
M18 x 1.5
6
6
6
491415
491615
491815
Fuel Pressure Take-Off Adapters
With 1⁄8" Female NPT Port
Fuel
Gauge
Take-off
Part No.
Description
700192
700193
700194
700195
700196
700202
700210
700201
700211
700197
700198
700199
700204
782144*
-6 Male To -6 Male
-6 Male To 1⁄4" Male Npt
-6 Male To -6 Female Swivel
-8 Male To -8 Male
-10 Male To -10 Male
-4 Male An To -4 Female Swivel 90˚ (Npt On Right Side As Shown Above)
*Excellent For Fuel And Oil Gauges Where A Pressure Sending Unit Needs To Be Added.
www.pirtek.co.uk
27
Hardline Tubing
Coated Aluminium Tube
Hardline Tube
The incorporation of the PA 12 coating and 1AlMn 1 Aluminium
Tube has created a new automotive standard.
The advantages include:
• Construction:
• Tube - Seamless Drawn Aluminium Tube (AlMn 1)
to DIN 1725
1. High resistance to wear, abrasion, corrosion
and impact damage.
• Coating – Polyamide 12 (Pa12)
2. Weight saving over conventional tube and hose.
• Couplings: JLS Compression Fittings or AN 37° Flare Fittings
3. The PA 12 coating has excellent adhesion to the tube.
The coating will not chip, peel or flake.
• Applications: Fuel, Oil, Air Jack Systems, Fire Extingiusher,
Power Steering, Cooling Lines & Breathers
• Temperature Range: -40°C to +155°C (-40°F to +310°F)
4. Excellent Bend Radius as shown in the data table.
5. Smooth bore for a low friction coefficient.
Code
Tube O.D. (inches)
Wall Thickness (inches)
LP06100150
3/8
0.039
Other sizes available on request. Minimum orders may apply.
Burst Pressure (PSI)
Bend Radii (mm)
AN Size Centerline
Weight (g/m)
3739
13.2
6
64.7
Hardline Tooling
Tube Flarer
Hardline Tube
To Suit Tube Sizes 1/8",3/16", 1/4", 5/16", 3/8", 7/16",1/2",
5/8" and 3/4".
Code
821050
20
Hydraflow Clamps
Quick Disconnect Fittings
Hydraflow 14J02/14J34 Series flexible fluid couplings offer
a remarkable list of features and have earned a reputation
for superior quality and reliability in both the marine and
automative industry.
14J02 or 14J34
2 piece Assembly Clamshell
and Sleeve standard or with
safety strap
14C02 or 14C34
Clamshell only
standard or with
safety strap
These flexible tube couplings are designed to accommodate
angular and linear motion that can occur due to changes in
both attitude and environment conditions.
14R02
Sleeve only
They are fast to use;
• No tooling needed.
• Snaps on & off.
• Double swivel hinge for easier assembly.
• Optional safety strap for visual inspection (14J34 Series)
• Saves time, where time is an issue.
Each coupling assembly consists of two pieces;
a Clamshell (14C02) and Sleeve (14R02).
• Lightweight.
• Full flow, no restrictions.
• Double “O” ring sealing.
• Threadless fixed cavity design for a seal that is fast
and secure.
• Axial adjustment 6.35mm minimum, with angular
misalignment for full coupling ± 4°
Cannot be accidentally opened;
• The latch pawls lock automatically when the clamshell
is snapped shut and will not open unless all three pawls
are lifted simultaneously.
Part Numbers Explained.
14J02 = Description,
-08 = Size/Tube O.D.
A = Aluminium,
C = Stainless
SN = Super Nickel.
Example 14J02 -08 A
No improper installation;
• The safety strap on 14J34 cannot be fastened unless
the clamshell is fully closed.
Quick assembly;
• Quick disconnect action of the safety strap and latch
simplifies and facilitates assembly and removal with
one hand.
Couplings design conforms to and has been qualified to all
applicable military and commercial specification requirements
for flexible fuel or environmental control systems for service at
pressures of 125 PSIG (operating); 250 PSIG (proof) and 375
PSIG (burst) and temperature from -65°F to 450°F (-55°C to
+232°C).
Electrical bonding to class “S” of MIL-5087B is automatically
provided when coupling is assembled.
All images are for illustration purposes only
21
Clamshell without Nylon Strap
Code
14J02
14J02
14J02
14J02
14J02
14J02
14J02
14J02
14J02
14J02
14J02
14J02
-
08
10
12
16
20
24
28
32
40
48
56
64
Tube O.D (inches)
Weight (kg)
"A" Dim Max(mm)
"B" Dim Max(mm)
"D" Dim Max (mm)
0.500"
0.625"
0.750"
1.000"
1.250"
1.500"
1.750"
2.000"
2.500"
3.000"
3.500"
4.000"
0.012
0.014
0.018
0.022
0.025
0.026
0.032
0.035
0.044
0.067
0.080
0.108
18.03
19.81
21.59
24.89
28.19
31.24
34.54
38.10
44.45
51.56
57.91
64.26
18.29
18.29
20.83
23.11
23.11
23.11
23.11
24.13
24.13
25.15
25.15
25.15
26.92
29.46
32.26
37.85
44.20
51.56
56.90
64.26
76.96
93.73
106.43
121.67
Clamshell with Nylon Strap
Code
Tube O.D (inches)
Weight (kg)
"A" Dim Max(mm)
"B" Dim Max(mm)
"D" Dim Max (mm)
08
10
12
16
20
24
28
32
36
40
0.500"
0.625"
0.750"
1.000"
1.250"
1.500"
1.750"
2.000"
2.250"
2.500"
0.016
0.017
0.021
0.026
0.030
0.033
0.036
0.043
0.046
0.050
22.60
24.13
26.42
29.97
32.77
36.32
39.37
42.92
45.72
48.51
18.29
18.29
20.81
23.11
23.11
23.11
23.11
24.13
24.13
24.13
26.92
29.97
32.77
38.61
44.96
52.32
57.66
65.28
73.91
78.23
14J34 - 48
14J34 - 56
3.000"
3.500"
0.079
0.091
55.37
61.97
25.15
25.15
95.00
107.70
14J34
14J34
14J34
14J34
14J34
14J34
14J34
14J34
14J34
14J34
-
22
Hydraflow Clamps
Weld Flanges
Code
Tube O.D (inches)
Weight (kg)
"A" Dim Max(mm)
"B" Dim Max(mm)
14F03-8D
14F03-10D
14F03-12D
14F03-16D
14F03-20D
14F03-24D
14F03-28D
14F03-32D
14F03-40D
14F03-48D
14F03-56D
14F03-64D
0.50"
0.625"
0.75"
1.00"
1.25"
1.50"
1.75"
2.00"
2.50"
3.00"
3.50"
4.00"
0.004
0.005
0.007
0.010
0.011
0.015
0.017
0.020
0.027
0.033
0.039
0.045
17.40
20.57
25.15
32.16
38.51
45.36
51.71
58.65
71.35
84.05
97.05
109.98
18.77
18.77
19.63
21.03
21.03
21.03
21.03
21.44
21.44
21.44
21.44
21.44
Socket Weld-ons
Size Tube 0.D.
Sleeve
Double 0-Ring
Single 0-Ring
8
10
12
16
20
24
28
32
36
40
48
56
64
1005-08HC
1005-10HC
1005-12HC
1005-16HC
1005-20HC
1005-24HC
1005-28HC
1005-32HC
1005-36HC
1005-40HC
1005-48HC
1005-56HC
1005-64HC
997208SWHC
997210SWHC
997212SWHC
997216SWHC
997220SWHC
997224SWHC
997228SWHC
997232SWHC
997236SWHC
997240SWHC
997248SWHC
997256SWHC
997264SWHC
997108SWHC
997110SWHC
997112SWHC
997116SWHC
997120SWHC
997124SWHC
997128SWHC
997132SWHC
997136SWHC
997140SWHC
997148SWHC
997156SWHC
997164SWHC
Clamshell and Sleeve Specifications
Coupling assemblies 14J02 is exactly the same as
14J34, except 14J34 includes a nylon safety strap.
Please consult factory for pressure ratings for particular
applications.
Temperature rating -65°F to +450°F. Nylon Strap is
rated at maximum of 400F.
Coupling Flanges and O-ring seals are not furnished
with coupling assemblies. O-ring seal material should
be selected for fluid compatibility.
Material and finishes for 14C02-A & 14C34-A Clamshell
is 2024-T6 or equivalent aluminium anodized and dyed
magenta. Latch pawls, hinges, rivets, latch springs are
300 series stainless steel passivated. Bonding springs
are beryllium copper wire tin coated. Safety strap on
14J34-A is nylon.
Butt Weld-ons
Size Tube 0.D.
Sleeve
Double 0-Ring
8
10
12
16
20
24
28
32
36
40
48
56
64
1005-08BWHC
1005-10BWHC
1005-12BWHC
1005-16BWHC
1005-20BWHC
1005-24BWHC
1005-28BWHC
1005-32BWHC
1005-36BWHC
1005-40BWHC
1005-48BWHC
1005-56BWHC
1005-64BWHC
997208BWHC
997210BWHC
997212BWHC
997216BWHC
997220BWHC
997224BWHC
997228BWHC
997232BWHC
997236BWHC
997240BWHC
997248BWHC
997256BWHC
997264BWHC
Materials and finishes for 14C02 & 14C34-C Clamshell
is 300 series stainless steel passivated. Latch pawls,
hinges, rivets, latch springs are 300 series stainless steel
passivated. Bonding springs are beryllium copper wire
tin coated. Safety strap on 14J34-C is nylon.
Materials and finishes for
14R02-A Sleeve is 2024-T6
or equivalent aluminium
anodised dichromate colour.
Materials and finishes for
14R02-C Sleeve is 300 series
stainless steel passivated.
23
Silicone Hoses and Aluminium Pipes
JLS Motorsport Stockists of Viper Performance
Silicone Hoses & Aluminium Pipes
With unrivalled quality and service Viper Performance have
become a leading brand of Performance Silicone Hoses and
associated accessories. The hoses are hand crafted in the UK to the
highest standard. With hundreds of sizes & shaped hoses & pipes
15˚
for Motorsport, classic cars and kit cars. Combined the hoses with
Viper’s 6063 aluminium pipes for DIY custom intercooler, intake,
coolant set ups. All Viper Performance Silicon Hoses and Aluminium
Pipes come with a 3 year warranty.
120˚
Straights
Reducers
Couplers
60˚
135˚
Super-Flexi
90˚
T Pieces
180˚
Hump Hose
Bellows
Call us for price on a particular shape, length or size, hose
or pipe. Bespoke & custom silicone hoses are also possible.
24
NEW
PRODUCT
JLS Motorsport Oil Cooler Range
JLS Motorsport has introduced a new range of versatile Oil
Coolers to fit the budget of all Motorsport professionals and
enthusiasts offering a variety of cooling specifications.
Height of the Oil Coolers is measured and referred to in row
numbers. These Oil Coolers are available in two Matrix sizes
235mm & 115mm.
The 235 Matrix oil cooler is available in six row heights
7, 10, 13, 16, 19, and 25 with a variety of fittings ranging
from -6 JIC through to -12 JIC and BSP 1⁄2", 3⁄4" & 5⁄8".
The 115 Matrix oil cooler is available in three row heights
10, 13 & 16 with a similar variety of fittings ranging from
-6 through to -12 and 1⁄2" BSP.
Every Oil Cooler has been pressure tested to 10bar before
despatch which is more than sufficient for the demanding
conditions of motorsport racing and general automotive
purposes with a recommended working pressure of 7bar.
Oil Cooler fitting kits can be built to suit customer specification
using our high quality branded braided hose and fittings
available from JLS Motorsport, please ask for details.
Oil Cooler
dimensions explained;
235 Matrix Specification Sheet
Part No
Prefix
No of Rows
Matrix
Fitting Sizes
(Check for availabilty)
OC23507
OC23510
OC23513
OC23516
OC23519
OC23525
7
10
13
16
19
25
235
235
235
235
235
235
-6,
-6,
-6,
-8,
-8,
-8,
-8, -10, -12 & 1⁄2" BSP
-8, -10, -12, 1⁄2" & 3⁄4" BSP
-8, -10, -12, 1⁄2", 3⁄4" & 5⁄8" BSP
-10, -12, 1⁄2", 3⁄4" & 5⁄8" BSP
-10, -12, 1⁄2", 3⁄4" & 5⁄8" BSP
-10, -12, 1⁄2", 3⁄4" & 5⁄8" BSP
Length
(mm)
Dept
(mm)
Height
(mm)
Weight
(grams)
330
330
330
330
330
330
51
51
51
51
51
51
53
77
100
124
147
194
706
878
1084
1392
1520
2040
Weight
(grams)
Capacity Litres
(approx)
0.14
0.20
0.25
0.30
0.375
0.475
115 Matrix Specifications
Part No
Prefix
No of Rows
Matrix
Fitting Sizes
(Check for availabilty)
Length
(mm)
Dept
(mm)
Height
(mm)
OC11510
OC11513
OC11516
10
13
16
115
115
115
-6, -8, & 1⁄2"BSP
-6, -8, & 1⁄2" BSP
-6, -8, -10, -12 & 1⁄2" BSP
210
210
210
51
51
51
77
100
124
Union Street, West Bromwich,
West Midlands, England B70 6DG
Tel: +44 (0)121 525 5800 Fax: +44 (0)121 525 4833
Email: [email protected]
500
615
730
Capacity Litres
(approx)
120
180
210
JLS Motorsport
is a division of
James Lister & Sons Ltd
Cables
JLS F.A.S.T Tension/Push-Pull Cables
JLS F.A.S.T. System Series 3 Cables
Technical Information:
JLS – F.A.S.T. CABLES are technically advanced control cables
ideal for use in all classes of motorsport. Various types of cable
are available; brake bias, tension and push-pull. Tension cables
are designed for use on throttle and clutch applications. Push-Pull
cables are designed for gearshift and anti-roll bar adjustment.
All cables share the same key advantages of flexibility, low
frictional resistance, high strength and thermal stability. All 3
Series cables are extremely flexible with a minimum bend radius
of only 75mm. This allows cables to be routed through the most
confined spaces.
The inner core on both Tension and Push-Pull cables is polymer
coated providing a fast smooth and lubrication-free operation.
The outer conduit is steel stranded with a temperature resistant
polymer cover which is ideal for operation in many of the high
temperature environments that are commonplace in motorsport
applications.
The JLS F.A.S.T. programme has a wide range of end
configurations, available in several material options. Specials
can also be manufactured. Please refer to head office for details.
Tension Cable:
HEFT 2
• Outer Conduit:
Reinforced HEFT 2 thermoplastic
• Inner Core:
1 x 19 High Tensile stainless steel
rope with polymer cover
• Temperature Rating:
-54° (-65°F) to 149°C (300°F)
• Colour:
Black
Push-Pull Cables:
• Outer Conduit:
Reinforced HEFT 2 thermoplastic
• Inner Core:
cover
HP stainless steel core with polymer
• Temperature Rating:
-54° (-65°F) to 149°C (300°F)
• Colour:
Black
Operating Loads:
Travel
Push Operating Load
Kg
lbs
Pull Operating Load
Kg
lbs
27.2
27.2
27.2
18.1
13.6
60
60
60
40
30
27.2
27.2
27.2
27.2
27.2
60
60
60
60
60
27.2
60
27.2
60
Push-Pull Cables:
1"
2"
3"
4"
5"
Tension Cables:
Pull Load
Series 3 Tension Cables
74080 – Clamp to Clamp fixing
26
74086 – Bulkhead to Bulkhead fixing
74083 – Clamp to Bulkhead Fixing
Series 3 Push-Pull Cables
When you place an order or enquiry for
cables we require the following information:
Tension Cables
Push-Pull Cables
Part No (eg. 74080)
L1 Dimension
L2 Dimension
Special Requirements
Rod Travel (1”, 2”,3”,4” or 5”)
X & Y cable fixing (eg. Bulkhead or Clamp)
Overall Length
Special Requirements
Brake Bias Cable
As specified by many major racecar constructors and Kart
Manufacturers.
A brake bias cable assembly allows the driver to adjust the brake
bias of the vehicles brakes during competition.
Brake bias cables manufactured to customer requirements, with
positive click positioning for accurate setting and prevention of
movement caused by vibration. Includes easily visible handle.
Directional arrow indicator decals fitted on request.
End Fittings
• 3/8 UNF Female
• 7/16 UNF Female
• M8 x 1.25 Female
• M8 x 1.0 Female
• Plain Shafts
• Specials on request
27
Accessories
Fuel/Oil
JLS Valves
Brake Balance Adjuster
BV3
Place in any hydraulic circuit to reduce
pressure, maximum reduction 57%.
Normally positioned in line to the
rear brakes, but can be positioned
anywhere to produce weird and
wonderful effects e.g. on inside front
wheel on oval tracks. Aluminium and
steel construction. Available with
handle giving 7 positive click settings
or knob to allow even finer adjustment.
Weight 8oz.
Sandwich Plates
Code
Description
SP1
SP1-A
SP1-C
SP1-D
SP1-F
OT-SP1
3/4 UNF
5/8 UNF
13/16 UNF
M18 x 1.5
M20 x 1.5
3/4 UNF C/W T. STAT
Fuel Pumps
Hose Protection
Heat Protection Sheet
Ohler® Flexrohr Type 332 ALFOL
For use to insulate against ambient heat.
• Self adhesive backing for easy mounting on any surface
• Glossy foil with good heat reflection properties
• Buckle and abrasive resistant
Code
Size
332-ALFOL-1-10-SA
Available by 1m wide by up to 25m long
Code
Description
476087
480530
480532
40106
40107
FPA-905
Silver Top - Road Use
Silver Top - Road/Competition Use
Red Top - Works/Competition Use
Solid State - Road Use
Solid State - Competition Use
FACET Pump Mounting Kit
28
FSE, Sytec – Motorsport – Fuel Pump, Filter Brackets & Billet Filter
FSE Bosch 044 Fuel Pump
FSE Bullet Fuel Filter
Bosch Motorsports "044" fuel pump as used by JGTC cars,
Touring cars, most of the WRC cars, and many more, and
possibly, the most popular aftermarket fuel pump.
This Bullet Fuel Filter from FSE Sytec is designed for motorsport use
and suitable for both carburettor and fuel injections applications.
Code
Description
PT254044
FSE Sytec Filter Bracket
Can be used as a pump pre-filter or main high pressure filter.
Pre-pump filter installation between the fuel tank and the fuel
pump (external out of the tank). High pressure filter - fits into the
fuel line between the injection pump and the engine.
With anodised solid billet filter case and end cover this item is
not only functional, meeting requirements of British Touring car
series, it also looks great. Contains replaceable paper cartridge
filter and is supplied with bracket fixings. High Flow metal
cleanable filter element is also available as optional extra.
This unit has been tested to 10bar (146psi).
• includes mounting brackets, includes instructions,
12 month warranty
Fuel pump mounting bracket for Bosch in-line fuel pumps and Bullet
Filters. For use in competition applications i.e. Rally and Race for
light, strong and secure fixing. This mounting bracket will ensure
the fuel pumps are mounted securely and safely. Sound sleeve will
allow a soft mount flexibility reducing vibration and assisting with
noise suppression.
The main benefits are as follows:• Solid/rigid construction
• Lightweight design
• Hinged clamp
• Available in anodised silver, black or blue
• Four bolt mounting for secure location
• Supplied with ‘standard’ sound sleeve
Code
Description
MPB001B
MPB002BK
MPB003S
Mounting Bracket to Suit 044 Fuel Pump – Blue
Mounting Bracket to Suit 044 Fuel Pump – Black
Mounting Bracket to Suit 044 Fuel Pump – Silver
Code
Description
JLS001
Sytec Bullet Fuel Filter
Call for details
& availability
29
New Heat Protection Range
Exhaust Insulating Wrap
Generation II Copper Exhaust Insulating Wrap™
• Reduces under bonnet temperatures by up to 70%
• Improves heat resistance up to 30% more than current
insulating technology using a new proprietary coating
developed by Thermo-Tec
• Increases horsepower and fuel efficiency
• Withstands continuous heat up to 2000 °F
• Contains no asbestos
• Increases life of the engine and electronic system components
Part No.
Description
11031
11032
Exhaust wrap copper 1" width 50 ft length
Exhaust wrap copper 2" width 50 ft length
Turbo Insulating Kit
• Eliminates turbo lag
• Custom fit cut-to-fit will fit any size turbo from sports
vehicles to diesel trucks
• Two turbo kits available
Part No.
Description
11001
11002
11021
11022
11151
11152
11153
11154
Exhaust
Exhaust
Exhaust
Exhaust
Exhaust
Exhaust
Exhaust
Exhaust
38
wrap
wrap
wrap
wrap
wrap
wrap
wrap
wrap
1" width 50 ft length
2" width 50 ft length
graphite black 1" width 50
white 1" width 15 ft length
white 2" width 15 ft length
ft length
ft length
ft length
ft length
Part No.
Description
15001
15002
4 cyl turbo insulating kit
6 & 8 cyl turbo insulating kit
Snap Strap Kit
• Stainless steel straps with multi-lock system
• Pre-cut lengths with multi-lock attached – just insert
the end and pull to tighten
Part No.
Description
13150
13160
Snap strapkit 9" – pack of 12
Snap strap kit 18" – pack of 6
Call
for further
details
Thermo-Shield™
• Prevents vapour lock
• Easy-to-apply adhesive backing
• Reflects radiant heat up to 2000°F
Part No.
Description
14002
13995
Thermo Shield 11⁄2" width x 15ft
Thermo Shield 2" width x 50ft
31
Tube Manipulation
Whatever your needs for formed tube we can help!
We can
• Work from drawings or samples or even on site to connect
two points
• Produce one-offs or large batches
• Provide a range of steel, copper or aluminium components
• Handle tube sizes from 6mm to 42mm
• Complete the job with welding, brazing
and all associated fittings
• Respond quickly and work fast!
Bespoke Tooling Design capability
Benefits
• Rigid tube offers a more robust, longer life, often lower total
cost solution to flexible hose and is more visually appealing
• Complex bend paths or hose tube combinations can eliminate
multiple components & leak paths
• In combination with our other hydraulics and pneumatics
product ranges we can meet all your fluid power requirements
Support
3D Model
Finished Tool
• Rapid turnaround
• 5-axis co-ordinate checking
• Free delivery
• Stocking arrangements for volume supply
• Design Facilities
5-axis co-ordinate checking
32
CNC Tube Bending Equipment
Technical Data
Range
6mm - 42mm - Mild Steel, Copper, Aluminium
6mm - 30mm - Stainless Steel.
Material
Stainless Steel, Mild Steel, Copper, Aluminium, Kunifer.
Centre Line Bend Radius
Standard = 2 x diameter of tube size.
Other sizes available on request.
Information Required
Drawing, X Y Z Co-ordinates, Y B C Co-ordinates, or Sample.
End Forming
ORFS, Triple lock, Walform.
Bending Machine
2 x Addison DB40 with hitch feed for long lengths or Mandrel bend
up to 3mtrs. Data Storage.
Inspection Equipment
Addata Plus 5 axis Measuring Machine.
For Inspection and Data storage.
Cleanliness
Compri Clean Technology.
Cleaned with foam pellets up to NAS 7.
Fitting Assy
Nuts & Rings Assembled to Din 2353.
Parker EO2.
Welding & Brazing
In-house & Subcontract.
Deburring
RSA Deburring Technology.
Capacity
One off's Small-Medium Batch Qty's OEM & Kits.
Mobile
On site Development if Required.
For any further information please
contact us at our facility in Redditch:
21 Bartleet Road
Washford Industrial Estate
Redditch
B98 0DG
Call: 07966 468440
www.lister.co.uk
33
Technical Details
Hose Length Measurement Techniques
There are a number of factors to be considered when selecting the most suitable type of hose and couplings for your application.
Flow, media, operating/ambient temperature and system working pressure all have a varying degree of effect on the life of a hose assembly.
When ordering an assembly the following information is required:
1: Code numbers for hose type/size and end couplings.
2: Overall assembly length (taken from the centreline of the sealing faces) as illustrated below
Length of Assembly
Length of Assembly
Length of Assembly
Length of Assembly
Length of Assembly
Length of Assembly
Length of Assembly
How to measure the fitting angle
You need to check the angular relationship of both couplings.
This is described by the number of degrees in a clockwise direction
between the furthest fitting from the eye in the vertical position
and the fitting nearest the eye.
34
Installation Tips
Stainless Steel Hose Assemblies
1 Wrap hose with masking tape at the point where hose is to be
cut. Using a fine tooth hacksaw or radial wheel cut through hose
squarely, remove the tape and trim any loose or frayed wires.
Clean hose inner core.
1
2 Slip hose into the socket to the depth indicated by the hose
insertion mark on the outside of the socket. This should be just
short of the back of the tread.
3 Mark hose with tape or a suitable marking device at the rear
of the socket. This mark will later indicate to you if the hose
has pushed out of the socket during assembly.
2
4 Using an anti-seize lubricant, liberally lubricate inside of hose
and threads on the nipple.
3
5 Holding the nipple horizontally in a vice, push socket end
carefully with hose onto nipple with a turning motion and engage
nipple threads into those of the socket. Continue tightening by
hand as far as possible to make sure that the threads are
properly mated and no cross threading has occurred.
4
6 Using a spanner, complete tightening assembly. When properly
assembled, a small gap of 0.75mm or less should exist between
the socket and shoulder of the nipple.
7 Check mark made on hose in step 3 for any evidence of
deviation.
8 Hose assembly should be cleaned and tested to twice the
maximum operating pressure. Hose assembly should also be
checked for any leakage under normal operating conditions.
5
6
7
35
Union Street, West Bromwich,
West Midlands, England B70 6DG
Tel: +44 (0)121 525 5800 Fax: +44 (0)121 525 4833
JLS Motorsport
is a division of
James Lister & Sons Ltd

Layout 2 - JLS Motorsport

Transcription

Similar documents

Vroom24 Cabinet Installation

SCP 5000 - Karcher Cleaning Equipment

Booster Pump Filter Cleaner v1

KITCHEN FAUCETS

water slide - Toys Inquiry

Karp`s Hardware

User Manual - Aqua Bed Warmer

QuietLine Installation Guide

Get Ready for Spring

SUPER HAND LIGHT SHL-40 | INSTRUCTION MANUAL

Read the full report by Brookdale Consulting (2013)