Comparison/technical data: X-Floc injection
Transcription
Comparison/technical data: X-Floc injection
Comparison/technical data: X-Floc injection nozzles, rotary nozzles, ventilated rotary nozzles and special nozzles Model Function diagram Type Product number Image Nozzle outlet Suitability for cellulose fibre Suitability for wood fibre Suitability mineral / glass wool Suitability for bulkware Passive ventilation Active ventilation *1) Min. insulation thickness Max. insulation thickness Board thickness Hose fastener Drill hole required Max. drill hole Locking device Spacer Rotary bearing Material Finish Weight Injection nozzle Rotary nozzle Ventilated rotary nozzle ED50>15 3637 ED50>20 2688 WED50>20 2826 ED50>24 3961 ED50>29 4037 WED50>29 DD50>24 852 DD50>29 KR 544 DD50>29 4788 DD63>35 2496 DD75>50 2997 X-Jet 63 1708 X-Jet 63 FV 3843 X-Jet 75 1789 X-Jet 75 FV 2929 J-Jet 75 3795 S-Jet 63 4910 straight straight angled*4) straight straight cranked shaped cranked angled*4) angled*4) angled*4) angled*4) angled*4) angled*4) angled*4) angled*4) shaped n p p n n n n n n p p p n p p p n o o p n o o p n n q q n n n q 9 9 >6cm*2) <30cm <40mm 9 9 >4cm <25cm <35mm 9 9 <12cm*2) <40cm <40mm 9 9 <10cm <30cm <35mm 9 9 >14cm <45cm <65mm, flange, adjustable 9 (2 brackets) >105mm 120mm*3) 9 sash lock Plain bearing Aluminium / stainless steel Powder-coated/ anodised q q q o o q o n n p o n n n n n n q p n >4cm <20cm >4cm <10cm >2cm <10cm >2,5cm >3cm <10cm <15cm No limit (note nozzle length) - >15mm >20mm >23mm 0.3kg 0.3kg 0.3kg - >25mm Steel Powder-coated 0.31kg >30mm 0.31kg >25mm 9 0.31kg n p p o >4cm >4,5cm >5cm <15cm <20cm <30cm No limit (note nozzle length) 9 (1 bracket) 9 (2 brackets) >35mm >38mm >35mm >40mm 9 9 9 Plain bearing Steel / Aluminium Powder-coated / anodised 1kg 1kg 1kg 1.1kg 1.1kg >85mm (±1mm) 100mm*3) 93 clip springs - 9 (2 brackets) =106,5mm >106,5mm (±1mm 120mm*3) 9clamping ring 9 6 clip springs Sliding ring and ball bearing Steel / stainless steel / aluminium / plastic Powder-coated / - / anodised / - 1.5kg 2.2kg =106,5mm ±1mm 9 clamping ring - 2.1kg 2.8kg 2.6kg <16cm <60cm <65mm, flange, adjustable >105mm 120mm*3) 9sash lock Plain bearing Aluminium / stainless steel Powder-coated / anodised 4.9kg (incl. hose) Suitability key: n Extremely well-suited / Best nozzle choice | o Well suited | p Recommended with limitations | q Not recommended *1) Not recommended but technically possible *2) The smallest possible insulation thickness can be further reduced using the stopper rings included with the nozzle *3) It may be difficult or impossible to secure the nozzle if too large an injection hole is drilled. *4) 90° straight sawn-off pipe bend, ensures good diversion of material flow with a good importability into the drill hole Special models Type Injection nozzles without reduction ED50>50 ED63>63 With adapter ED50>20 WE Oval ED50>12 Valve NW50>24AV 300 5670 4959 1737 5692 Nozzle outlet Suitability for cellulose Suitability for wood fibre Suitability mineral and / glass wool cranked n n p angled*4) n n p straight n n n oval p p p straight n n n Suitability for bulkware Min. insulation thickness o >6cm o <8cm n >4cm n >4cm n >4cm Max. insulation thickness <25cm <30cm <20cm <10cm <15cm Drill hole required >5cm >7cm >2cm 7x1,2cm <2,4cm Product number Image General information f With small nozzle diameters (<30mm), the material flow must be reduced using the airlock feed gate f For materials with a high density (>80kg/m³), hoses with small diameters should preferably be used (so that the air flow speed is increased) f The angled and cranked nozzle outlets can wear down quickly if used to convey abrasive materials For prices, see current price list •Published 09.2012 • We accept no responsibility for errors or changes • Downloads available from www.x-floc.com/download X-Floc Dämmtechnik-Maschinen GmbH | Rosine-Starz-Straße 12 • D-71272 Renningen | Telephone no. + 49 - 7159 - 80470 - 30 • Fax - 40 | www.x-floc.com Material Steel Stainless steel Steel Stainless steel Steel Surface Powder-coated Micro-blasted Powder-coated Blank Blank Weight 0,4kg 0,51kg 0,5kg 0,4kg 1,0kg