IPL, POULAN PRO, PB26H54YT, 2010

Transcription

IMPORTANT MANUAL
DO NOT THROW AWAY
03032
REPAIR PARTS MANUAL
WARNING:
MODEL:
PB26H54YT
Read this Manual and follow all Warnings
and Safety Instructions. Failure to do so
can result in serious injury.
LAWN TRACTOR
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan-pro.com
532 44 11-70
12.20.10 BAD
Printed in the U.S.A.
HOW TO USE THIS MANUAL
This manual is designed to provide the customer with a means to identify the parts on his/her tractor
when ordering repair parts. The illustrations may or may not represent the actual assemblies; therefore,
it is not recommended to use this manual as a guide to assemble or disassemble the tractor. Some
hardware and parts are drawn larger in order to more readily identify them.
Each tractor has its own model number.
The model number for your tractor can be found on the fender under the seat.
When ordering parts, always give the following information:
• Product - “TRACTOR”
• MODEL NUMBER - “PB26H54YT (96042012700)”
• Part Number
• Part Description
TABLE OF CONTENTS
SCHEMATIC ................................................................................................................ 3
ELECTRICAL ............................................................................................................4-5
CHASSIS ..................................................................................................................6-7
DRIVE........................................................................................................................8-9
ENGINE .................................................................................................................10-10
STEERING ................................................................................................................. 12
SEAT .......................................................................................................................... 13
MOWER DECK .....................................................................................................14-15
DECALS ..................................................................................................................... 16
MOWER LIFT ............................................................................................................. 17
WARRANTY............................................................................................................... 18
TRACTOR - - MODEL NO. PB26H54YT (96042012700), PRODUCT NO. 960 42 01-27
SCHEMATIC
SCH12
BATTERY
SOLENOID
STARTER
M
RED
A
RED
FUSE
AMMETER
(OPTIONAL)
BLACK
ELECTRIC CLUTCH
WHITE
S
G
WHITE
A
D
RED
B
E
C
A1
L
BLACK
WHITE
H
BLACK
M
B
PTO SWITCH
(DISENGAGED)
GRAY
A2
RED
CLUTCH/BRAKE
(PEDAL UP)
BLACK
REVERSE SWITCH
(NOT IN REVERSE)
BLACK
BLACK
2
BLACK
3
BLACK
BLACK
SEAT SWITCH
(NOT OCCUPIED)
BLACK
BLACK
1
6
GRAY
BLACK /WHITE
JUNCTION
CONNECTOR
C F H
SPARK
PLUGS GAP
(2 PLUGS ON
TWIN CYL. ENGINES)
IGNITION
UNIT
B E G
(OPTIONAL)
A D
HOUR
METER
BLACK
BLUE
PTO SWITCH
SHORTING
CONNECTOR
CHASSIS
HARNESS
FUEL
LINE
(MATING SIDE)
BLACK
BLUE
POWER OUTLET
(OPTIONAL)
BLUE
CHARGING SYSTEM OUTPUT
9 - 1 6 AMP DC @ 3600 RPM
FUEL SHUT-OFF
SOLENOID
(IF EQUIPPED)
NOTES
BLACK
12V
REGULATOR
ORANGE
RED
STATOR
28 VOLTS AC @ 3600 RPM (REGULATOR DISCONNECTED)
BROWN
BLACK
LIGHT
SWITCH
HEADLIGHTS
IGNITION SWITCH
POSITION
CIRCUIT
OFF
RUN/OVERRIDE
M+G+A1
B+A1
RUN
START
B+A1
B + S + A1
3
6
2
1
6
3
5
5
2
4
4
1
“MAKE”
L+A2
CHASSIS HARNESS
CONNECTOR
(MATING SIDE)
DASH HARNESS
CONNECTOR
3
WIRING INSULATED CLIPS
NOTE: IF WIRING INSULATED
CLIPS WERE REMOVED FOR
SERVICING OF UNIT, THEY
SHOULD BE RE-INSTALLED TO
PROPERLY SECURE YOUR
WIRING.
NON-REMOVABLE
CONNECTIONS
REMOVABLE
CONNECTIONS
ELECTRICAL
T11S
33
22
90
79
30
21
27
2
1
24
91
99
100
34
8
27
43
41
40
26
25
55
28
16
With 12V Outlet Option
103
71
59
102
29
With Service Minder Option
105
46
4
42
ELECTRICAL
KEY PART
NO. NO.
DESCRIPTION
1
532 16 34-65 Battery
2
874 76 04-12 Bolt Hex Head 1/4-20 x 3/4
8
532 18 64-91 Box Battery
16
532 17 61-38 Switch Interlock Push-In
21
532 18 37-59 Harness Socket Light w/4152J
22
532 00 41-52 Bulb Light
24
532 40 02-53 Cable Battery
25
532 41 28-94 Cable Starter
26
532 17 51-58 Fuse
27
873 51 04-00 Nut Keps Hex 1/4-20 unc
28
532 14 54-91 Cable, Ground
29
532 40 15-45 Switch, Seat
30
532 19 33-50 Switch, Ignition
33
532 41 19-33 Key/Chain
34
532 11 07-12 Switch Light/Reset
40
532 40 11-04 Harness Ignition Dash
41
817 72 04-08 Screw Thd Cut 1/4-20 x 1/2
42
532 13 15-63 Cover, Terminal
43
532 19 25-07 Solenoid
46
532 40 17-63 Gauge SRVCMNDR HRMTR
50
532 17 46-51 Switch PTO
55
817 06 05-12 Screw Thdrol 5/16-18 x 3/4 TYTT
71
532 19 42-76 Harness Ignition
79
532 17 52-42 Socket Asm Bulb Twistlock
90
532 43 53-95 Cover Terminal Battery
91
532 19 02-70 Strap Battery
99
817 67 04-12 Screw 1/4-20 x 3/4
100 819 09 14-16 Washer 9/32 x 7/8 x 16
102 532 40 44-54 Harness Pigtail
105 532 40 75-68 Switch Reverse
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
5
CHASSIS
15
297
18
25
14
191
206
130
5
137
176
205
176
176
177
151
150
175
176
176
130
182
196
36
161
181
194
235
36
236
68
194 68
235
236
138
213
34
68
287
180
183
181
162
37
58
218
213
68
228
68
189
194
189
152
217
189
233
189
165
228
189
chassis-tex_elite-husq_6
233
6
52
CHASSIS
KEY
NO.
PART
NO.
DESCRIPTION
5
14
15
18
25
34
36
37
52
58
68
130
137
138
150
151
152
161
162
165
175
176
177
180
181
182
183
189
191
194
196
205
206
213
217
218
228
233
235
236
287
297
--
532 43 63-86
532 43 63-82
532 18 99-82
532 43 27-78
532 18 99-81
532 19 61-25
817 06 05-12
532 43 63-87
873 68 05-00
532 41 22-80
817 49 05-08
532 41 63-58
532 18 49-21
532 40 97-30
532 43 09-61
532 40 78-07
532 19 95-35
532 41 20-72
532 14 24-32
532 19 68-26
532 19 32-43
532 40 07-76
532 19 52-27
532 41 50-63
532 40 47-96
532 19 30-57
874 52 05-20
817 00 05-12
532 41 65-00
873 90 05-00
532 41 45-79
532 42 47-47
532 42 47-48
874 76 05-12
532 40 91-67
532 19 63-95
532 19 51-61
532 19 65-39
532 40 61-29
873 93 05-00
817 60 04-06
532 18 82-67
532 43 18-83
Dash
Hood
Lens Grille LH
Grille
Lens Grille RH
Plate Engine
Screw 5/16-18 x 3/4
Fender
Nut Crown Lock 5/16-18
Drawbar Upper
Screw THDROL 5/16-18 x 1/2
Screw #10 x 0.750 BOS Thread
Bumper Hood
Cupholder
Duct Heat Hood
Bracket Pivot
Shield Browning/Debris
Window Fuel
Screw Hex Wsh Hi-Lo 1/4 x 1/2 unc
Support Tank Rear
Crossmember
Screw 10-24 x 5/8 Wshd Qdrx
Bushing Steering
Chassis
Bushing Mtg. Fender Crgo.
Dash Lower
Bolt Full Thd. 5/16-18 x 1-1/4
Screw 5/16-18 x 3/4
Insert Lens Reflective RH
Nut Lock Hex Flange 5/16-18
Console Asm. Deck Lift
Skirt Side RH
Skirt Side LH
Bolt Hex HD 5/16-18 unc x 3/4
Rod Pivot
X-Piece Hood
Stud Fastener
Bolt Shoulder
Spacer Fender
Nut Center Lock 5/16-18 unc
Screw Hex Washead 1/4-20 x 3/8
Insert Lens Reflective LH
Kit Bumper (Not Shown)
1 inch = 25.4 mm
7
DRIVE
207
221
206
125
92
213
116
56
160
209
143
26
185
216
197
221
196
184
125
35
80
125
125
170
42
227
64
231
167
159
51
160
226
153
208
214
125
210
49
185
186
211
188
189
222
163
187
215
161
29
50
211
125
15
159
190
51
52
51
183
166
153
17
116
2
225
33
230
205
116
2
183
205
1
73
drive-tex_K46_pedal_39_r1
33
73
99
8
230
DRIVE
KEY
NO.
PART
NO.
1
------
2
15
17
26
29
33
35
42
49
50
51
52
56
64
73
80
92
99
116
125
143
153
159
160
161
163
166
167
170
532 12 35-83
819 13 13-16
532 41 36-78
532 19 96-79
532 40 38-06
812 00 00-01
532 19 77-22
532 12 48-72
872 11 06-14
532 19 43-27
873 90 06-00
532 19 43-26
532 13 09-69
532 19 78-65
874 49 05-40
532 44 06-19
874 76 05-20
532 41 57-42
873 90 05-00
817 00 05-12
817 49 05-08
532 12 47-88
876 02 04-12
532 16 94-84
532 10 57-09
532 40 10-34
532 42 91-64
532 40 52-57
532 41 34-30
DESCRIPTION
Transaxle, Tufftorq K46BT (Order
Parts from Transaxle Manufacturer)
Key
Washer 13/32 x 13/16 x 16 Ga.
Spring, Brake
Spring Return Cruise
Rod, Brake
Ring E
Rod, Brake, Park
Cover, Foot Pedal
Bolt
Pulley Idler Flat
Lock Nut 3/8-16
Idler V-Groove 910" Offset
V-Belt, Drive
Shaft Asm. Pedal Brake Control
Bolt Hex 5/16-18 x 3.75
Strap Torque
Bolt Fin Hex 5/16-18 unc x 1.25
Rod Spring Bypass
Screw 5/16-18 x 3/4
Screw 5/16-18 x 1/2
Retainer Spring
Pin Cotter 1/8 x 3/4
Retainer Clip
Spring, Return, Clutch
Rod Pedal Control
Nut Push .625
Latch Brake Parking
Keeper Belt Centerspan
KEY
NO.
PART
NO.
DESCRIPTION
183
184
185
186
187
188
189
190
196
197
205
206
207
208
209
210
211
213
214
215
216
221
222
225
227
226
230
231
532 13 70-57
532 44 15-04
872 11 06-22
532 19 43-21
819 13 32-10
532 19 43-23
532 19 43-17
532 19 43-18
817 00 06-16
532 19 58-04
532 12 17-48
532 19 78-67
532 19 78-68
532 19 78-69
532 40 07-69
532 40 09-80
532 12 01-83
532 42 47-44
532 42 12-63
532 40 17-23
532 19 61-31
532 40 31-87
879 21 20-10
532 40 33-19
817 49 05-12
532 40 15-64
532 18 89-67
532 40 72-87
Spacer Axle
Handle Parking Brake
Bolt
Spacer Retainer
Washer
Link Clutch Ground Drive
Bellcrank Ground Drive
Keeper Bellcrank Ground Drive
Screw 3/8-16 x 1
Link Clutch Anti-Rotation
Washer 25/32 x 1-5/8 x 16 Ga.
Bracket Mount Latch Cruise
Latch Control Cruise
Gear Sector Control Cruise
Rod Control Cruise
Rockr Asm. Pdeal Control
Bearing Nylon
Knob control Cruise
Pad Pedal Forward
Pad Pedal Reverse
Bracket Pulley Idler
Retainer Spring Clip Handle
Washer 21/32 x 1-1/4 10 Ga.
Keeper Belt Transaxle
Screw 5/16-18 x 3/4
Bracket Mount Torque
Washer Harden .793 x 1.637 x 060
Idler V-Groove
1 inch = 25.4 mm
9
ENGINE
87
1
62
45
21
71
69
18
20
84
12
15
79
70
11
41
42
37
2
85
28
90
9
37
29
SPARK ARRESTER KIT
engine-tex_bs-2cyl_41
10
ENGINE
KEY
NO.
PART
NO.
DESCRIPTION
1
2
9
11
12
15
18
20
21
28
29
37
41
42
45
62
69
70
71
79
84
85
87
90
-----532 14 97-23
532 19 43-20
532 40 00-08
532 40 50-97
532 43 80-80
532 43 02-14
532 42 35-02
532 41 63-58
532 40 11-35
532 13 71-80
532 12 34-87
532 12 61-97
810 04 07-00
873 51 04-00
532 43 40-17
532 16 53-91
532 15 99-55
532 16 05-89
532 18 39-06
817 06 06-20
532 17 39-37
532 17 18-77
817 00 06-16
Engine B&S Model No. 44P777-2448-G1
Muffler
Keeper Belt Engine
Clutch Electric
Pulley Engine
Tank Fuel
Cap Fuel
Control Throttle/Choke
Screw #10 x 0.750 BOS Thread
Fuel Line
Spark Arrester Kit
Clamp Hose
Washer 1-1/2 OD x 15/32 ID x 250
Washer Lock 7/16
Nut Keps Hex 1/4-20 unc
Shield Heat Muffler
Gasket
Exhaust Tube LH
Exhaust Tube RH
Screw Socket HD 5/16-18 x 1
Screw 3/8-16 x 1-1/4
Bolt 7/16-20 x 4 x Gr. 5-1.5
Bolt 5/16 - 18 x 3/4
Screw 3/8-16 x 1
1 inch = 25.4 mm
For engine service and replacement parts, call the toll free
number for your engine manufacturer listed below:
Briggs & Stratton
1-800-233-3723
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained
and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are
placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop
the rated gross power when used in a given piece of power equipment (actual “on-site” or net power). This difference is
due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-toengine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher
rated power for this Series engine.
11
STEERING ASSEMBLY
26
45
51
1
20
21
13
16
63
28
22
64
60
28
9
8
19
63
59
35
7
66
9
67
2
8
7
57
58
4
6
67
6
61
14
15
5
62
13
69
68
15
PART
NO.
DESCRIPTION
1
2
4
5
6
7
8
9
13
14
15
16
19
20
21
22
26
28
35
532 42 45-51
532 19 59-68
532 40 30-87
532 40 30-88
532 12 49-31
532 12 17-48
812 00 00-29
532 12 12-32
532 12 17-49
810 04 06-00
873 54 06-00
532 40 82-19
532 19 47-29
532 43 27-84
532 18 67-37
532 42 05-37
532 42 45-53
817 00 06-12
532 19 47-32
Wheel, Steering
Axle Asm., Front
Spindle Asm., LH
Spindle Asm., RH
Bearing, Race Thrust Harden
Washer 25/32 x 1-5/8 x 16 Ga.
Ring, Clip #T5304-75
Cap, Spindle
Washer 25/32 x 1-1/4 x 16 Ga.
Washer, Lock Hvy Hlcl Spr 3/8
Nut, Crown Lock 3/8-24 unf
Shaft Steering
Plate Steering
Boot, Steering
Adapter, Wheel Steering
Steering Support Lower
Insert, Wheel Steering
Screw 3/8-16 x 3/4
Gear, Sector Plate
13
53
steering-tex_Prem2_9
KEY
NO.
8
14
70
KEY
NO.
PART
NO.
DESCRIPTION
45
51
53
57
58
59
60
61
62
63
64
66
67
68
69
70
819 18 38-12
873 94 08-00
532 18 89-67
532 19 72-46
532 19 47-47
532 19 47-48
873 97 10-00
532 19 47-40
532 19 47-41
817 00 05-12
532 19 98-49
871 02 07-48
532 19 47-37
873 90 07-00
532 19 91-62
532 19 61-97
Washer 9/16 ID x 2-3/8 x 12 Ga.
Nut Hex Jam Toplock 1/2-20 unf
Washer Hardened .793 x 1.637 x .060
Bracket Upstop
Bolt Shoulder Sector Pivot CFM
Washer Thrust Sector Steering
Nut Flange Lock 5/8-11
Draglink, LH
Draglink, RH
Screw 5/16-18 x 3/4
Retainer Clip Spring Steering
Bolt Hex Fghd 7/16-14 x 3 Serr
Bushing PM Front Axle
Nut Lock Flange 7/16-14 Gr. 5
Washer 1.5 x .505 x .118
Bracket Deck Susp. Front
1 inch = 25.4 mm
12
SEAT ASSEMBLY
8
8
1
8
8
7
7
41
40
10
21
6
37
37
2
44
43
21
3
seat-tex_6.5SL_1_r1
KEY
NO.
PART
NO.
DESCRIPTION
1
2
3
6
7
8
10
21
532 40 66-23
532 18 01-66
532 14 06-75
873 80 06-00
532 12 41-81
532 17 18-77
532 19 69-77
532 17 18-52
Seat
Bracket Pivot Fender
Strap, Asm Fender
Nut, Lock w/Ins. 3/8-16 unc
Spring, Seat Cprsn
Bolt 5/16-18 unc x 3/4 w/Sems
Pan, Seat
Bolt, Shoulder 5/16-18
KEY
NO.
PART
NO.
DESCRIPTION
37
40
41
43
44
873 80 05-00
532 19 76-61
532 19 82-00
874 76 06-12
819 13 38-12
Nut, Lock 5/16-18 unc
Handle Slide Seat
Spring Latch Seat
Bolt Fin Hex 3/8-16 unc x 3/4
Washer 13/32 x 2-3/8 x 12 Ga.
1 inch = 25.4 mm
13
MOWER DECK
MOWER?DECKªTEX??R
14
MOWER DECK
KEY
NO.
PART
NO.
1
6
7
8
11
12
13
14
15
16
18
19
21
24
25
26
27
29
30
31
32
33
34
39
43
46
47
49
50
52
532 19 56-32
532 19 60-66
532 19 71-81
532 19 30-03
532 18 72-56
532 40 48-51
532 18 72-91
532 18 72-81
532 11 04-85
819 13 13-12
872 14 05-05
532 19 42-08
873 68 05-00
532 10 53-04
532 17 81-02
532 11 04-52
532 18 89-38
532 13 14-91
532 17 39-84
532 18 76-90
532 15 35-35
532 40 02-34
873 68 06-00
532 19 73-80
532 19 60-65
532 13 77-29
532 19 61-03
873 90 06-00
872 11 06-16
532 19 73-79
DESCRIPTION
Deck Weldment Mower
Cover Mandrel LH
Cover Mandrel RH
Bolt 7/16 Asm. Blade
Blade Bagging
Rod Anti-Sway
Shaft Asm. w/Lower Bearing
Housing, Mandrel
Bearing, Ball, Mandrel
Washer 13/32 x 13/16 x 12 Ga.
Bolt Carr. 5/16-18 x 5/8
Pin Cotter 5/16 Bow Tie Lock
Nut, Crownlock 5/16-18 unc
Cap Sleeve
Spring, Torsion
Nut, Push
Deflector Shield
Rod, Hinge
Screw, Thdroll Washer Head
Washer, Spacer Mower Vented
Pulley, Mandrel
Nut, Flg. Top Lock
Nut Crownlock 3/8-16 unc
Pulley, Idler, Stationary
Arm, Idler
Screw, Thdroll. 1/4-20 x 5/8
V-Belt, Mower
Nut, Lock Flg. 3/8-16 unc
Bolt Rdhd Sqnk 3/8-16 unc x 2
Pulley Idler 4.50
KEY
NO.
58
59
60
97
98
113
114
116
117
120
122
185
187
188
189
190
192
194
196
241
242
---
PART
NO.
532 18 73-42
532 18 73-44
532 18 76-07
532 17 85-15
532 19 61-05
872 11 05-08
532 18 75-56
532 19 34-06
532 17 48-73
819 13 20-12
532 18 75-57
873 90 07-00
532 19 51-61
873 90 05-00
532 19 51-85
532 19 65-39
532 19 84-68
872 14 07-16
872 14 06-20
532 41 55-98
532 15 29-27
532 41 64-05
532 18 72-92
--
532 41 80-76
DESCRIPTION
Baffle Right
Baffle Left
Baffle Center
Washer Hardened
Spring Drive
Bolt Rdhd Sqnk 5/16-18 x 3/4
Rod Tension Relief
Bolt, Shoulder
Gauge Wheel
Washer 13/32 x 1-1/4 x 12 Ga.
Bushing Tension Relief
Nut Lock Flange 7/16-14 Gr. 5
Stud Fastener w/"D" Anti-Rotation
Arm Susp. Mower Rear
Bolt Shoulder
Keeper Belt Idler
Bolt Carr Sqnk 3/8-16 x 2-1/4
Bolt Rdhd 3/8-16 unc x 2-3/4 Gr. 5
Port Washout
Screw TT #10-32.5 3/8 FLG
Coupling Quick Disconnect
Mandrel Asm. Service (Includes
Key Nos. 13-15 and 33)
Replacement Mower, Complete
1 inch = 25.4 mm
15
DECALS
1
1
11
13
4
6
3
9
10
10
8
5
2
14
KEY
NO.
PART
NO.
DESCRIPTION
1
2
3
4
5
6
8
9
532 43 84-99
532 17 84-55
532 44 06-54
532 43 85-02
532 43 50-97
532 41 16-57
532 17 05-63
532 14 50-05
Decal, Hood
Decal, Mower Caution
Decal, Side Panel
Decal, Fender
Decal, Eng H.P.
Decal, Fender Operator's
Decal, Warning
Decal, Battery Dnge/Poi
1
4
10
5
6
DESCRIPTION
10
11
13
14
------
532 43 84-92
532 43 84-29
532 43 85-01
532 19 87-85
532 40 95-07
532 16 69-60
532 40 95-05
532 44 11-68
532 44 11-70
Decal, Fender SD RH
Decal, Replacement
Decal, Steering Wheel
Decal, Mower Schematic
Pad, Footrest Control
Decal, Bypass
Pad, Footrest, LH
Manual, Operator's (Eng/Span)
Manual, Parts (Eng/Span)
1
2
3
4
5
6
7
8
9
10
11
--
11 3
7
PART
NO.
KEY
NO.
WHEELS AND TIRES
2
KEY
NO.
9
8
PART
NO.
532 05 91-92
532 06 51-39
532 43 96-73
532 05 99-04
532 10 62-22
532 12 49-57
532 12 49-59
532 17 50-39
532 13 84-68
532 12 49-26
532 44 08-81
532 14 43-34
DESCRIPTION
Cap, Valve, Tire
Stem, Valve
Rim Assembly, Front
Tube, Front
Tire, Front
Fitting, Grease
Bearing, Flange
Cap, Axle
Tire, R. TS. 20 x 8-8
Tube, Rear
Rim Assembly, Rear
Sealant, Tire (Not Shown)
1 inch = 25.4 mm
wheel_art_1-vgt
16
MOWER LIFT
87
87
7
90
98
89
3
10
88
97
2
91
97
91
87
89
lift-tex_23
89
87
KEY
NO.
PART
NO.
DESCRIPTION
2
3
7
10
87
88
89
532 42 20-27
532 19 52-31
532 41 15-55
532 19 63-14
532 19 42-09
532 41 07-10
819 19 19-12
Shaft Asm., Lift
Lever Asm., Lift RH
Grip, Lever
Spring Torsion
Spring Lift Assist
Washer Clear Zinc
KEY
NO.
PART
NO.
DESCRIPTION
90
91
97
98
532 19 42-08
532 40 34-07
817 00 06-12
532 19 52-64
Link Asm. Lift Rear
Screw 3/8-16 x .75 Smgml Tap/R.Z
Link Lift Susp. Front Mower
1 inch = 25.4 mm
17
SERVICE NOTES
18
SERVICE NOTES
19
LIMITED WARRANTY
The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materials and workmanship. For a period of two (2) years from date of purchase by the original consumer purchaser, we will repair or
replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we find to be defective due
to materials or workmanship. This Warranty is subject to the following limitations and exclusions.
1.
This warranty does not apply to the engine, transaxle/transmission components, battery (except as noted below) or components parts thereof. Please refer to the applicable manufacturer's warranty on these items.
2.
Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. Transportation charges for any parts submitted for replacement under this warranty must be paid by the purchaser unless such return is requested by the manufacturer.
3.
Battery Warranty: On products equipped with a Battery, we will replace, without charge to you, any battery which we find
to be defective in manufacture, during the first ninety (90) days of ownership. After ninety (90) days, we will exchange the
Battery, charging you 1/12 of the price of a new Battery for each full month from the date of the original sale. Battery must
be maintained in accordance with the instructions furnished.
4.
The Warranty period for any products used for rental or commercial purposes is limited to 90 days from the date of original
purchase.
5.
This Warranty applies only to products which have been properly assembled, adjusted, operated, and maintained in accordance with the instructions furnished. This Warranty does not apply to any product which has been subjected to alteration, misuse, abuse, improper assembly or installation, delivery damage, or to normal wear of the product.
6.
Exclusions: Excluded from this Warranty are belts, blades, blade adapters, normal wear, normal adjustments, standard
hardware and normal maintenance.
7.
In the event you have a claim under this Warranty, you must return the product to an authorized service dealer.
Should you have any unanswered questions concerning this Warranty, please contact:
In Canada contact:
HOP
Outdoor Products Customer Service Dept.
9335 Harris Corners Parkway
Charlotte, NC 28269 USA
HOP
5855 Terry Fox Way
Mississauga, Ontario
L5V 3E4
giving the model number, serial number and date of purchase of your product and the name and address of the authorized
dealer from whom it was purchased.
THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL DAMAGES AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN FOR OUR EXPRESSED WARRANTIES. Some areas
do not allow the limitation of consequential damages or limitations of how long an implied Warranty may last, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which
vary from locale to locale.
This is a limited Warranty within the meaning of that term as defined in the Magnuson-Moss Act of 1975.
20

IPL, POULAN PRO, PB26H54YT, 2010

Transcription

Similar documents

- Lawn Mower Manuals

IPL, YTH 1542 XP (YTH 1542 XPT), 96043000602

IPL, GTH260 Twin, 96041004502, 2008-09, Tractor

IPL, POULAN, PO175A42LT, 2011