5 Watt – Compact Folding Blade Adapter PSA05F Adapter Meets

WWW.PHIHONG.COM
5 Watt – Compact Folding Blade Adapter
PSA05F Adapter Meets EISA and ENERGY STAR Requirements
Features
 Folding Blades
 CC & CV Control
 ErP Directive 2009/125/EC level 2 annex
1b Compliant



15mm Thick with Blades Folded
5 Start Standby Power < 0.03W
EPS 2.0 (Efficiency Level V)*
Applications
 MPEG Players
 PDA


Personal Electronics
Digital Camera
Safety Approvals (PENDING)
 cUL/UL
 IEEE1725 Approved
 C-Tick


CE
SAA
Mechanical Characteristics
 Length: 60mm (2.36in)
 Width: 47mm (1.85in)


Height: 15.0mm (0.59in)
Weight: 80g (3oz)
Output Specifications
Model
PSA05F-050Q-H
(1)
DC Output
Voltage
5V
Load
Min.
0A
Max.
1.0A
Ripple (1)
P-P (max.)
100mV
Regulation
Line & Load
±5%
Efficiency
Level
Measured after 10 minutes with by-pass capacitors 0.1uF/ / 10uF at output connector terminal.
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
PSA05F Characteristics
Input:
AC Input Voltage Rating
100 to 240V AC
AC Input Voltage Range
WWW.PHIHONG.COM
Environmental:
Temperature
Operation
Non-operation
Relative Humidity
0 to +40°C
-40 to +85°C
10 to 90%
90 to 264V AC
Emissions
47 to 63Hz
FCC Class B part 15
EN55022 Class B
Input Current
Immunity
0.3A (RMS) maximum
EN61000-4-2
Level 4
EN61000-4-5
Level 4
Harmonic: EN61000-3-2 Class A
Flicker: EN61000-3-3
AC Input Frequency
Input Power Saving
< 0.03W
Output:
Power
5W continuous
Efficiency
68% minimum; CEC level V
Ripple and Noise
100mV
Power Saving Mode
<30mW at 115V AC/230V AC and no load
Over-Current Protection
1.1A maximum
Over-Voltage Protection
8.5V DC maximum, Zener Clamping
Short-Circuit Protection
Output can be shorted permanently without damage
Interchangeable Clips
FPBAG-H (Europe, UK, Australia)
FPE-H (Europe)
FPK-H (UK)
FPS-H (Australia)
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000V AC for 1 min., 10mA
Insulation Resistance
Primary to Secondary: 7 M ohm 500V DC
Reliability
MTBF: 200K hours minimum at 120V AC and max
load at 25°C ambient temperature.
DC Output Connector
USB Type A
Dimension Diagram Unit: mm
WWW.PHIHONG.COM
5W Interchangeable Plug Series
PSA05R Adapter Meets CEC and EISA Requirements
Features
 Double Insulated
 Field Changeable AC Plugs
 Efficiency Level IV Compliance
Applications
 MP3 Players
 PDAs
Safety Approvals
 cUL/UL
 TUV
 SAA
Mechanical Characteristics
 Length: 71.7mm (2.82in)
 Width: 45mm (1.77in)
Output Specifications
Model (1)
PSA05R-033-R
PSA05R-050-R
PSA05R-090-R
PSA05R-120-R
Note:
DC Output
Voltage
3.3V
5V
9V
12V





Personal Electronics
Digital Cameras


CE
C-Tick


Height: 31mm(1.22in)
Weight: 120g (4oz)
Load
Min.
0A
0A
0A
0A
Low Leakage Current
Low Cost
Class B EMI
Max.
1.2A
1.0A
0.56A
0.42A
Ripple (2)
P-P (max.)
50mV
50mV
90mV
120mV
Regulation
Line Load
±1% ±5%
±1% ±5%
±1% ±5%
±1% ±5%
Efficiency
Level
115V AC
(1) PSA05R-033 and PSA05R-050 are available in special order quantities only, contact Phihong for more information.
(2) Measured after 10 minutes with by-pass capacitors 0.1uF // 10uF at output connector terminal.
Interchangeable clips sold separately.
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
WWW.PHIHONG.COM
PSA05R Characteristics
Input:
AC Input Voltage Rating
EMI
100 to 240V AC
FCC Class B
EN55022 Class B
AC Input Voltage Range
Immunity
90 to 264V AC
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
Level 3
Level 2
Level 2
Level 3
Level 3
Harmonic
Flicker
EN61000-3-2
EN61000-3-3
AC Input Frequency
47 to 63Hz
Input Current
0.25A (RMS) maximum at 120V AC
0.125A (RMS) maximum at 240V AC
Leakage Current
<0.25mA maximum at 254V AC
Inrush Current
30A for 120V AC at maximum load
60A for 240V AC at maximum load
(Cold start at ambient 25°C)
Hold-up Time
10mS minimum at 120V AC and maximum load
Over-Voltage Protection
< 120%, Zener Clamp
Short-Circuit Protection
Input Power Saving
>120% auto restart
0.3W maximum for 9V model
0.5W maximum for 3.3V, 5V and 12V models
MTBF
150K hours minimum at full load and 110V AC, 60Hz
(measured at ambient 25°C)
Output:
Efficiency
≥72.3% average efficiency for 9V model
≥64.5% average efficiency for 5V and 12V models
≥62.4% average efficiency at 115V AC, ≥61.4% average
efficiency at 230V AC for 3.3V model
Dielectric Withstand (Hi-pot) Test
Input to Output: 3000V AC for 1 min., 10mA
DC Output Connector
2.1 x 5.5 x 9.5mm Center Positive Barrel Standard
Environmental:
Temperature
Operation
Non-operation
Humidity
AC Input Clips (Sold Separately)
0 to +40°C
-25 to +85°C
10 to 90%
Dimension Diagram Unit: mm (inch)
US: RPA
Europe: RPE
UK: RPK
Australia: RPS
China: RPC
Korea: RPH
Brazil: RPB
India: RPI
Argentina: RPN
WWW.PHIHONG.COM
12W Wall Plug Adapter
PSA12x Adapter Series Meets EISA and Energy Star Requirements
Features
 Double Insulated
 Class B EMI
 Ecodesign ErP Directive 2009/125/EC
level 2 annex 1b Compliant




Less Than 0.3W No-Load Current
Over-Voltage Protection
Energy Star EPS Level 2.0
Efficiency Level V Compliance
Applications
 Wireless Communications
 Networking


Portable Equipment
Peripherals
Safety Approvals
 cUL/UL
 PSE
 BSMI


TUV
CE
Mechanical Characteristics (1)
 Length: 71.5mm (2.81in)
 Width: 33.75mm (1.33in)


Height: 69.5mm (2.74in)
Weight: 85g (3.00oz)
Output Specifications
Load
Ripple (2)
Regulation
Efficiency
DC Output
Voltage
Min.
Max.
P-P (max.) Line & Load
Level
(3)
PSA12x-120
12V
0A
1.0A
240mV
±5%
(1) Dimensions for PSA12A-120 model
(2) Measured with an oscilloscope with 20MHz (or over) Bandwidth. Outputs should be bypassed
at a connector with a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor.
(3) X = A for US version, E for EU version
Model
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
PSA12x Characteristics
Input:
AC Input Voltage Rating
WWW.PHIHONG.COM
Over-Voltage Protection
Output voltage shall not exceed 20V
100 to 240 V AC
Short-Circuit Protection
AC Input Voltage Range
90 to 264V AC
AC Input Frequency
50 to 60Hz
Input Current
0.5A (RMS) maximum at 120V AC
0.25A (RMS) maximum at 240V AC
Protected against short circuit. Continuous short circuit
will not produce fire, smoke or excessive heat
Environmental:
Temperature
Operation
Non-operation
Humidity
0 to +40°C
-40 to +80°C
10 to 90%
Emissions
0.25A maximum at 264V AC
FCC Class B
EN55022 Class B
Inrush Current
Immunity
30A for 120V AC at maximum load
60A for 230V AC at maximum load
EN50082-1:
EN61000-4-2
EN61000-4-5
Leakage Current
Input Power Saving
0.3W maximum at no load
(EN55024)
Level 4
Level 3
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000V AC for 1 min., 10mA
Output:
Efficiency
DC Output Connector
77.76% minimum average efficiency
1.2 x 5.5mm Center Positive Standard
Hold-up Time
Mating Connector
10mS minim at 120V AC and maximum load
Dimension Diagram Unit: mm – PSA12A-120
Kycon KLD-0202-A or equivalent
Dimension Diagram Unit: mm – PSA12E-120
WWW.PHIHONG.COM
15 WATT INTERCHANGEABLE PLUG SERIES
PSA15R Wall Plug Adapter Meets CEC and EISA Requirements
Features
• Limited Power Source
• Class B EMI
• EISA Compliant
Applications
• Wireless Communications
• Peripherals
Safety Approvals
• cUL/UL
• TUV
• SAA
Mechanical Characteristics
• Length: 71.7mm (2.82in)
• Width: 50mm (1.97in)
Output Specifications
•
•
Class II Double Insulated
High Efficiency
•
•
Portable Equipment
PDA
•
•
•
•
•
Load
Min.
Max.
CE
C-Tick
CCC (except for 48V)
Height: 33.2mm (1.31in)
Weight: 145g (5.12oz)
Model
DC Output
Voltage
Ripple (1)
P-P (max)
Regulation
Line Load
PSA15R-050P
5V
0A
3.0A
50mV
PSA15R-060P (2)
6V
0A
2.5A
60mV
±5%
PSA15R-075P (2)
7.5V
0A
2.14A
75mV
PSA15R-090P
9V
0A
1.66A
90mV
PSA15R-120P
12V
0A
1.25A
120mV
PSA15R-150P
15V
0A
1.0A
150mV
PSA15R-240P
24V
0A
0.62A
240mV
PSA15R-480P
48V
0A
0.31A
480mV
PSA15R-480PE
48V
0A
0.31A
480mV
±5%
Efficiency
Level
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: (1) Measured after 30 minutes with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20 Mhz. (2) Special order
item. Minimum order quantity required. Please consult Phihong USA.
Interchangeable clips sold separately.
Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date
specifications.
PSA15R Characteristics
INPUT:
WWW.PHIHONG.COM
Over Voltage Protection
AC Input Voltage Rating
By Zener Clamping
100 to 240VAC
Short Circuit Protection
AC Input Voltage Range
Output can be shorted without damage
90 to 264VAC
ENVIRONMENTAL:
Input Current
Temperature
0.5A(RMS) max. @ 120VAC
0.25A(RMS) max. @ 240VAC
Operation
Non-operation
Leakage Current
Humidity
0.25mA max. @ all line conditions
Operation
Inrush Current (cold)
< 30A for 120VAC at max. load
< 60A for 240VAC at max. load
(Cold start @ ambient 25°C)
Emissions
0 to +40°C
-25 to +75°C
20 to 90%
FCC Class B
CISPR 22 Class B
Dielectric Withstand (Hi-pot) Test
Input Power Saving
Primary to Secondary: 3000VAC
0.5W maximum at no load
DC Output Connector
OUTPUT:
2.1x5.5mm Center Positive Standard
Efficiency
≥ 74.4% average efficiency
Mating Connector
Kycon KLD-0202-A or equivalent
Hold-up Time
10mS min. @ 120VAC and max. load
Over Current Protection
Output equipped with short circuit protection – auto
restart
Dimension Diagram Unit: mm (inch)
AC Input Clips (sold separately)
US: RPA
Europe: RPE
UK: RPK
Australia: RPS
Dimension Diagram Unit: mm
WWW.PHIHONG.COM
18 Watt Interchangeable Plug Series
PSA18R Wall Plug Adapter Meets EISA and CEC Requirement
Features
 Class B EMI
 No Load Power Consumption <0.3 Watt
 Energy Star EPS Version 2.0 Compliant
 Ecodesign ErP Directive 2009/125/EC
level 2 annex 1b Compliant
Applications
 Wireless Communications
 Peripherals
Safety Approvals
 cUL/UL
 TUV
 CE
 SAA
 C-Tick
Mechanical Characteristics
 Length: 71.7mm (2.82in)
 Width: 50mm (1.01in)
Output Specifications
Model
PSA18R-120P
DC Output
Voltage
12V




Class II Double Insulated
EISA and CEC Compliant
Short-Circuit Protection
Interchangeable AC Plugs


Portable Equipment
Networking Equipment




CCC
PSE
BSMI
PSB


Height: 33.3mm (1.31in)
Weight: 170g (6.00oz)
Load
Min.
0A
Max.
1.5
Ripple (1)
P-P (max.)
120mV
Regulation
Line & Load
±5%
Efficiency
Level
(1) Measured after 30 minutes with by-pass capacitors 0.1uF/10uF at output connector terminal and oscilloscope set at 20Mhz.
Interchangeable clips sold separately.
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
PSA18R Characteristics
Input:
AC Input Voltage Rating
WWW.PHIHONG.COM
Over-Voltage Protection
<20Vpk, auto restart
100 to 240V AC
Over-Current Protection
AC Input Voltage Range
Short-circuit protection – auto-restart
90 to 264V AC
Short-Circuit Protection
AC Input Frequency
Output can be shorted without damage
47 to 63Hz
Input Current
0.5A (RMS) maximum at 120V AC
0.25A (RMS) maximum at 240V AC
Environmental:
Temperature
Operation
Non-operation
Humidity
0 to +40°C
-25 to +75°C
20 to 90%
Leakage Current
0.25mA maximum at all line conditions
Emissions
Inrush Current
FCC Class B
EN55022 Class B
<30A for 120V AC at maximum load
<60A for 240V AC at maximum load
(Cold start at ambient 25°C)
Dielectric Withstand (Hi-pot) Test
Input Power Saving
DC Output Connector
0.3@ maximum at no load
2.1 x 5.5mm Center positive Standard
Output:
Efficiency
Mating Connector
Primary to Secondary: 3000V AC for 1 min., 10mA
Kycon KLD-0202-A or equivalent
>80.3% average efficiency
Hold-up Time
10mS minimum at 120V Ac and maximum load
Dimension Diagram Unit: mm (inch)
AC Input Clips (sold separately)
RPA: US
RPI: India
RPB: Brazil
RPK: UK
RPC: China
RPN: Argentina
RPE: Europe
RPS: Australia
RPH: Korea
WWW.PHIHONG.COM
24W – Wall Plug Adapter
PSC24E Meets ENERGY STAR and Ecodesign Requirements
Features
 Class B EMI
 No Load Power Consumption <0.3W
 Energy Star EPS Version 2.0 Compliant
 Ecodesign ErP Directive 2009/125/EC
level 2 annex 1b Compliant



Class II Double Insulated
CEC Compliant
Short-Circuit Protection
Applications
 Portable Equipment
 Peripherals

Access Devices
Safety Approvals
 CE

TUV
Mechanical Characteristics
 Length: 83.5mm (3.29in)
 Width: 35mm (1.38in)


Height: 53.5mm (2.11in)
Weight: 165g (5.82oz)
Output Specifications
Model
DC Output Voltage
PSA24E-120(P)-R
12V
Load
Min.
0A
Max.
2A
Ripple
P-P (max.)
150mV
Efficiency
Level
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
PSA24E Characteristics
Input:
AC Input Voltage Rating
WWW.PHIHONG.COM
Over-Voltage Protection
Voltage should not exceed 20V
100-240V AC
Over-Current Protection
AC Input Voltage Range
5A maximum at 230V AC
90-264V AC
EMI
FCC Class B
EN55022 Class B
AC Input Frequency
50-60Hz
Input Current
0.6A (RMS) max at 100V AC
Leakage Current
0.25mA maximum
Immunity
ESD: EN61000-4-2
Surge: EN61000-4-5
EFT: EN61000-4-4
Level 4
Level 2
Level 2
Dielectric Withstand (Hi-pot) Test
Inrush Current
85A maximum at 230V AC
(Cold Start and ambient 25°C)
Primary to Secondary: 3000V AC for 1 minute, 10mA
Insulation Resistance
Primary to Secondary: 7M ohm 500V DC
Input Power Saving
<0.3W at 115V AC and 230V AC, 0A
MTBF
100K Hours minimum at max load and 25°C
Output:
Efficiency
Meets CEC Standard Level V
82% Minimum efficiency
DC Output Connector
2.5mm x 5.5mm x 9.5mm
DC Cord
Environmental:
Temperature
1.5 meters
Operation
Non-operation
0 to 40°C
-40 to 85°C
Operating Humidity
5 to 90%
Dimension Diagram Unit: mm (inch)
WWW.PHIHONG.COM
10~20 Watt Interchangeable Plug Series
PSAA20R Adapter Series Meets EISA and Energy Star Requirements
Features
 Efficiency Level V Compliance
 Class B EMI
 Class II Double Insulated
 Ecodesign ErP Directive 2009/125/EC
Level 2 annex 1b Compliant
Applications
 Peripherals
 Gaming Machines
Safety Approvals
 cUL/UL
 CE
Mechanical Characteristics
 Length: 71.6mm (2.82in)
 Width: 50mm (1.97in)
Output Specifications
Model
PSAA20R-033(1)
PSAA20R-050(1)
PSAA20R-120(1)
PSAA20R-240(1)
PSAA20R-480(1)
DC
Output Voltage
3.3V
5V
12V
24V
48V










No-load Power Saving
High Efficiency
Compact Size
ENERGY STAR EPS Version 2.0
compliant
Point of Sale Equipment
Network Equipment
SAA
C-Tick
Height: 31mm (1.22in)
Weight: 170g (6oz)
Load
Min.
0A
0A
0A
0A
0A
Max.
3.00A
3.00A
1.67A
0.83A
0.42A
Output
Power
9.9W
15W
20W
20W
20W
Efficiency
Level
Note (1): The 3.3V and 5V models will be available as of Q4 2010.
Interchangeable Clips Sold Separately
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
WWW.PHIHONG.COM
PSAA20R Characteristics
Input:
AC Input Voltage Rating
100 to 240V AC
AC Input Voltage Range
90V AC to 264V AC
AC Input Frequency
47 to 63Hz
Input Current
0.5A (RMS) maximum at 120V AC
0.25A (RMS) maximum at 240V Ac
Leakage Current
0.25mA maximum at 264V AC
Inrush Current
40A maximum for 120V AC and maximum load
80A maximum for 240V AC and maximum load
(Cold start at ambient 25°C)
Input Power Saving
0.3W maximum at no load
Output:
Efficiency
Meets requirements for Energy Star EPS Version
2.0 Level V and Ecodesign Directive 2009/125/EC
level 2 annex 1b
Ripple
3.3V – 50mV
5V – 100mV
12V – 120mV
24V – 240mV
48V – 480mV
Hold-up Time
10mS minimum at 120V AC and maximum load
Dimension Diagram Unit: mm (inch)
Over-Current Protection
Short circuit protection – auto-restart
Short-Circuit Protection
Output can be shorted without damage
Environmental:
Temperature
Operation
Non-operation
Humidity
0 to +40°C
-25 to +75°C
20 to 90%
Emissions
FCC Class B
EN55022 Class B
Immunity
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
EN61000-3-2
EN61000-3-3
Level 3
Level 2
Level 2
Level 3
Level 3
Class A
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000V AC for 1 min., 10mA
DC Output Connector
2.1 x 5.5mm Center Positive Standard
DC Cord Length
3.3V Model is 1200mm; all other models are 1500mm
AC Input clips (sold separately)
RPA: US
RPI:
RPB: Brazil
RPK:
RPC: China
RPN:
RPE: Europe
RPS:
RPH: Korea
RPX:
India
UK
Argentina
Australia
C8
WWW.PHIHONG.COM
5 Watt Interchangeable Plug Series
PSAC05R Adapter Meet EISA and ENERGY STAR Requirements
Features
 Double Insulated
 Field Changeable AC Plugs
 Efficiency Level V Compliance



Low Leakage Current
Low Cost
Class B EMI
Applications
 MPEG Players
 PDA


Personal Electronics
Digital Camera
Safety Approvals
 cUL/UL
 TUV
 SAA
Mechanical Characteristics
 Length: 71.7mm (2.82in)
 Width: 45mm (1.77in)



CE
C-Tick
Ecodesign ErP Directive 2009/125/EC


Height: 29.79mm (1.17in)
Weight: 120g (4.2oz)
Output Specifications
Model
PSAC05R-050(P)(1)
PSAC05R-050(MB)(2)
DC
Output Voltage
5V
5V
Load
Min.
0A
0A
Max.
1.0A
1.0A
Efficiency
Level
(1) PSAC05R-050(P) has 2.1 x 5.5 x 9.5mm center positive output connector.
(2) PSAC05R-050(MB) has Mini-B plug.
Interchangeable clips sold separately
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
WWW.PHIHONG.COM
PSAC05R Characteristics
Input:
AC Input Voltage Rating
100 to 240V AC
AC Input Voltage Range
90 to 264V Ac
AC Input Frequency
47 to 63Hz
Input Current
0.3A (RMS) maximum at 115V AC
0.15A (RMS) maximum at 230V AC
Leakage Current
250uA maximum at 264V AC, 50Hz
Inrush Current
<30A for 240V AC at maximum load
(Cold start at ambient 25°C)
Input Power Saving
<0.3W maximum
Output:
Efficiency
Meets Energy Star Level V efficiency
Ripple
200mV max
Short-Circuit Protection
Output can be shorted without damage when operated
within specified input voltage and operating temperature
ranges.
PSC05R-050(P) Dimension Diagram Unit: mm
PSC05R-050(MB) Dimension Diagram Unit: mm
Over-Voltage Protection
No to exceed 7.2V DC
Over-Current Protection
Not to exceed 1.2A (RMS)
Environmental:
Temperature
Operation
Non-operation
Humidity
0 to +40°C
-40 to +85°C
10 to 90%
Emissions
FCC Class B
EN55022 Class B
AS/NZS 3548
Immunity
EN50082-1:
EN61000-4-4
EN61000-4-5
Level 4
Level 3
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000V AC 10mA, 1 minute
DC Output Connector
2.1 x 5.5 center positive standard (P model)
Mini USB (MB model)
AC Input Clips (sold separately)
RPA: US
RPI: India
RPB: Brazil
RPK: UK
RPC: China
RPN: Argentina
RPE: Europe
RPS: Australia
RPH: Korea
WWW.PHIHONG.COM
30 Watt Universal 2-Wire Input Medical Adapter
PSAM30R Series Adapter Meets CEC and EISA Requirements
V071146
Features
•
•
•
Double Insulated
< 100uA Leakage Current
Class B EMI
Applications
•
•
Dental Curing Devices
Portable Dental Equipment
Safety Approvals
•
•
cUL/UL60601-1
CE
Mechanical Characteristics
•
•
•
•
•
No Load Power Draw < 0.5W at 115VAC
No Load Power Draw < 0.75W at 230VAC
EISA Energy Efficient Compliance
•
Patient Hoists
•
AS/NZS 3260 & 4417
•
•
Length: 100mm (3.94in)
Width: 63mm (2.48in)
Height: 35.7mm (1.41in)
Weight: 200g (7.05oz.)
Output Specifications
Model
DC Output
Voltage
PSAM30R-120
+12V
PSAM30R-240
+24V
Load
Min.
Max.
0A
2.5A
0A
1.25A
Ripple (1)
P-P (max.)
120mV
Regulation
Line
Load
±5%
240mV
±5%
Efficiency Level
(1) Measured with using 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel.
Interchangeable clips sold separately.
Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit
www.phihong.com for the most up-to-date specifications.
PSAM30R Series Characteristics
WWW.PHIHONG.COM
INPUT:
AC Input Voltage Rating
Short-Circuit Protection
100 to 240VAC
Output can be shorted without damage
AC Input Voltage Range
90 to 264VAC
ENVIRONMENTAL
Temperature
AC Input Frequency
Operation
Non-operation
0 to +40°C
-25 to +85°C
47 to 63Hz
Relative Humidity
Input Current
1.0A (rms) max. @ 115VAC, 60Hz
0.5A (rms) max. @ 230VAC, 50Hz
Operation
Non-operation
10 to 90% Non-Condensing
10 to 95% Non-Condensing
Emissions
Leakage Current
100uA max. @ 264VAC, 50hz.
FCC Class B
EN55022 Class B / CISPR22 Class B
Inrush Current (cold start @ ambient 25°C)
Immunity
30A for 115VAC at max. load
60A for 230VAC at max. load
> 80.6% average efficiency (Level IV)
EN 50082-1: (EN55024)
EN 61000-4-2, Level 3
EN 61000-4-3, Level 2
EN 61000-4-4, Level 2
EN 61000-4-5, Level 3
EN 61000-4-6, Level 2
EN 61000-4-8
EN 61000-4-11
EN 61000-3-2: Harmonics
EN 61000-3-3: Flicker
Input Power Saving
0.50W max. for 115VAC, 60Hz at no load (Level IV)
0.75W max. for 230VAC, 50Hz at no load (Level III)
OUTPUT:
Efficiency
Hold-up Time
Dielectric Withstand (Hi-pot) Test
10mS Min. @ 115VAC, 60Hz
Primary to Secondary: 4000VAC for 1 minute, 10mA
Over-Voltage Protection
DC Output Connector
Included, all models
2.1mm x 5.5mm center positive standard
Over-Current Protection
AC Input Clips (sold separately)
Output equipped with short circuit protection – auto
restart
US: RPA
Europe: RPE
UK: RPK
Australia: RPS
Dimension Diagram Unit: mm
WWW.PHIHONG.COM
2.5W USB Adapter with Interchangeable Plugs
PSC03R Adapter Meets CEC and EISA Requirements
•
•
•
USB Socket
Field Changeable AC Plugs
ECOC Compliance
•
•
Wireless Communications
Peripherals
•
•
•
cUL/UL
TUV
SAA
•
•
Length: 75.32mm (2.97in)
Width: 45.96mm (1.81in)
Features
Applications
Safety Approvals
Mechanical Characteristics
•
•
•
Low Leakage Current
UL 94 Vo Flammability
Efficiency Level IV Compliance
•
•
Portable Equipment
Networking
•
•
CE
C-Tick
•
•
Height: 31.67mm (1.25in)
Weight: 61.1g (2.16oz)
Output Specifications
Model
DC Output
Voltage
PSC03R-050
5V
Load
Min.
Max.
0A
0.5A
Ripple (1)
P-P (max)
55mV
Regulation
Line
Load
±5%
Efficiency
Level
Note: (1) Measured by using a 12-inch twisted pair terminal with a 10uf EC capacitor and a 0.1uf ceramic in parallel,
measured at maximum load.
Interchangeable clips sold separately.
Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the
factory and visit www.phihong.com for the most up-to-date specifications.
PSC03R Characteristics
INPUT:
WWW.PHIHONG.COM
AC Input Voltage Rating
Short Circuit Protection
100 to 240VAC
Output can be shorted without damage
AC Input Voltage Range
Adapter Detection:
90 to 264VAC
Each data line (Data+ and Data-) is tied to +VDC via a
7.5K Ohm resistor and to DC RTN via a 15K Ohm
resistor
AC Input Current
0.15A(RMS) max. @ 115VAC
0.08A(RMS) max. @ 230VAC
ENVIRONMENTAL:
Temperature
Leakage Current
20uA max. @ 254VAC, 50Hz
Operation
Non-operation
Inrush Current (cold)
Humidity
<30A for 120VAC at max. load
<60A for 240VAC at max. load
(Cold start @ ambient 25°C)
Operation
Emissions
Input Power Saving
FCC Part 15 Class B
CISPR 22 Class B
0 to +45°C
-40 to +85°C
10 to 90%
0.5W maximum at no load
Dielectric Withstand (Hi-pot) Test
OUTPUT:
Primary to Secondary: 3000VAC
Efficiency
> 58% average efficiency
AC Input Clips (sold separately)
Hold-up Time
US: RPA
Europe: RPE
UK: RPK
Australia: RPS
10mS min. @ 120VAC and Max. load
Over-current Protection
0.75A max.
Over-Voltage Protection
8VDC max.
Dimension Diagram Unit: mm (inch)
WWW.PHIHONG.COM
2.5W USB Adapter with Interchangeable Plugs
PSC03R Adapter Meets CEC and EISA Requirements
•
•
•
USB Socket
Field Changeable AC Plugs
ECOC Compliance
•
•
Wireless Communications
Peripherals
•
•
•
cUL/UL
TUV
SAA
•
•
Length: 75.32mm (2.97in)
Width: 45.96mm (1.81in)
Features
Applications
Safety Approvals
Mechanical Characteristics
•
•
•
Low Leakage Current
UL 94 Vo Flammability
Efficiency Level IV Compliance
•
•
Portable Equipment
Networking
•
•
CE
C-Tick
•
•
Height: 31.67mm (1.25in)
Weight: 61.1g (2.16oz)
Output Specifications
Model
DC Output
Voltage
PSC03R-050
5V
Load
Min.
Max.
0A
0.5A
Ripple (1)
P-P (max)
55mV
Regulation
Line
Load
±5%
Efficiency
Level
Note: (1) Measured by using a 12-inch twisted pair terminal with a 10uf EC capacitor and a 0.1uf ceramic in parallel,
measured at maximum load.
Interchangeable clips sold separately.
Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the
factory and visit www.phihong.com for the most up-to-date specifications.
PSC03R Characteristics
INPUT:
WWW.PHIHONG.COM
AC Input Voltage Rating
Short Circuit Protection
100 to 240VAC
Output can be shorted without damage
AC Input Voltage Range
Adapter Detection:
90 to 264VAC
Each data line (Data+ and Data-) is tied to +VDC via a
7.5K Ohm resistor and to DC RTN via a 15K Ohm
resistor
AC Input Current
0.15A(RMS) max. @ 115VAC
0.08A(RMS) max. @ 230VAC
ENVIRONMENTAL:
Temperature
Leakage Current
20uA max. @ 254VAC, 50Hz
Operation
Non-operation
Inrush Current (cold)
Humidity
<30A for 120VAC at max. load
<60A for 240VAC at max. load
(Cold start @ ambient 25°C)
Operation
Emissions
Input Power Saving
FCC Part 15 Class B
CISPR 22 Class B
0 to +45°C
-40 to +85°C
10 to 90%
0.5W maximum at no load
Dielectric Withstand (Hi-pot) Test
OUTPUT:
Primary to Secondary: 3000VAC
Efficiency
> 58% average efficiency
AC Input Clips (sold separately)
Hold-up Time
US: RPA
Europe: RPE
UK: RPK
Australia: RPS
10mS min. @ 120VAC and Max. load
Over-current Protection
0.75A max.
Over-Voltage Protection
8VDC max.
Dimension Diagram Unit: mm (inch)