bearings - Ondrives

Transcription

bearings - Ondrives

BEARINGS
QM
Plain Oilite® Bushes Oil Impregnated
Self-Lubricated - ISO 2795 : Metric Type, 2 - 12mm Bores
L js13
ØB
ØD
f
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20% | 200+ -25% | 500+ -30% | 1000+ -40% | 2000+ -45%
Part
Number
Bore
Dia.
ØB G7
Outside
Dia.
ØD s7
Length
L js13
Max.
f
Price Each
1-9
QM3-22 5 2 0.3£2.62
QM3-32 5 3 0.3£2.62
QM5-33 5 3 0.2£2.62
QM5-43 5 4 0.2£2.62
QM5-6
3 5 60.2
£2.62
QM6-33 6 3 0.3£2.62
QM6-43 6 4 0.3£2.62
QM7-44 7 4 0.3£2.86
QM7-64 7 6 0.3£2.86
QM8-44 8 4 0.3£3.02
QM8-64 8 6 0.3£3.02
QM8-84 8 8 0.3£3.02
QM9-45 8 4 0.3£3.10
QM9-55 8 5 0.3£3.10
QM9-85 8 8 0.3£3.10
QM9-10
5 810 0.3£3.10
QM9-12
5 812 0.3£3.10
QM9-16
5 816 0.3£3.10
QM10-55 9 5 0.3 £3.17
QM10-85 9 8 0.3 £3.17
QM11-46 9 4 0.3 £3.17
QM11-66 9 6 0.3 £3.17
QM11-106
9 10 0.3 £3.17
QM11-12
6 912 0.3£3.17
QM11-166
9 16 0.3 £3.17
QM12-46 10 4 0.3 £3.22
QM12-66 10 6 0.3 £3.22
QM12-106
10 10 0.3 £3.22
QM12-126
10 12 0.3 £3.22
QM12-166
10 16 0.3 £3.22
QM13-57 10 5 0.3 £3.17
QM13-87 10 8 0.3 £3.17
QM13-107
10 10 0.3 £3.17
11 80.3
£3.39
QM14-8
7
Material
Sintered oil retaining Tin Bronze.
Performance
Max. Static Load: 50N/mm2. Max. Dynamic Load: 14N/mm2. Max. Velocity: 5m/s.
Designed to fit a H7 housing to run on a f7 Shaft.
Lubrication
Standard Oilite® bearings are impregnated with a highly refined mineral oil to ISO
VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust and
defoamant additives.
Part
Number
Bore
Dia.
ØB G7
Outside
Dia.
ØD s7
Length
L js13
Max.
f
Price Each
1-9
QM14-107 11 10 0.3 £3.39
QM15-68 11 6 0.3£3.10
QM15-88 11 8 0.3£3.10
QM15-128 11 12 0.3 £3.10
QM16-68 12 6 0.3£3.32
QM16-88 12 8 0.3£3.32
QM16-128 12 12 0.3 £3.32
QM16-168 12 16 0.3 £3.32
QM16-208 12 20 0.3 £3.32
QM17-109 12 10 0.3 £3.17
QM17-149 12 14 0.3 £3.17
QM18-69 14 6 0.4£3.48
QM18-109 14 10 0.4 £3.48
QM18-149 14 14 0.4 £3.48
QM19-810 14 8 0.3 £3.48
QM19-1010
14 10 0.3 £3.48
QM19-1610
14 16 0.3 £3.48
QM19-20
10 1420 0.3£3.48
QM19-25
10 1425 0.3£3.48
QM20-810 16 8 0.4 £4.11
QM20-1010
16 10 0.4 £4.11
QM20-1610
16 16 0.4 £4.11
QM20-20
10 1620 0.4£4.11
QM20-25
10 1625 0.4£4.11
QM21-812 16 8 0.4 £3.87
QM21-1212
16 12 0.4 £3.87
QM21-16
12 1616 0.4£3.87
QM21-2012
16 20 0.4 £4.94
QM21-25
12 1625 0.4£4.94
QM22-812 18 8 0.4 £3.70
QM22-1212
18 12 0.4 £3.70
QM22-16
12 1816 0.4£3.70
QM22-2012
18 20 0.4 £5.49
QM22-25
12 1825 0.4£5.49
Features
Provides a good balance between strength, wear resistance, conformability and
durability in operation. Ideal in a variety of applications where 'self-lubricating'
properties are required over a long period of time.
Other Info.
45° chamfers are incorporated on inside and outside diameters at each end of the bush.
Chamfer length varies with bush wall thickness and outside diameter.
Additional sizes available on request, P.O.A.
Also available in German and French standards.
Also available in a range of other forms: thrust washers, solid bar, cored bar, plates,
bearing plates and spherical bearings. Please contact Sales for further details.
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
BEARINGS
QM
L js13
ØB
ØD
f
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20% | 200+ -25% | 500+ -30% | 1000+ -40% | 2000+ -45%
Part
Number
Bore
Dia.
ØB G7
Outside
Dia.
ØD s7
Length
L js13
Max.
f
Price Each
1-9
QM23-1014 18 10 0.3 £3.48
QM23-1414 18 14 0.3 £3.48
QM23-2014 18 20 0.3 £5.05
QM24-1014 20 10 0.4 £3.70
QM24-1414 20 14 0.4 £5.17
QM24-2014 20 20 0.4 £6.39
QM24-30
1420 300.4£6.39
QM25-1015 19 10 0.3 £4.88
QM25-1515 19 15 0.3 £4.88
QM25-2015 19 20 0.3 £5.55
QM25-2515 19 25 0.3 £5.78
QM25-30
1519 300.3£5.78
QM26-1515 21 15 0.4 £5.37
QM26-2515 21 25 0.4 £6.20
QM27-1216 20 12 0.3 £4.57
QM27-1616 20 16 0.3 £4.57
QM27-2516 20 25 0.3 £5.49
QM27-3016 20 30 0.3 £7.49
QM28-1216 22 12 0.4 £6.83
QM28-1616 22 16 0.4 £6.83
QM28-2516 22 25 0.4 £7.40
QM28-30
1622 300.4£7.40
QM29-1218 22 12 0.3 £6.70
QM29-1818 22 18 0.3 £6.70
QM29-3018 22 30 0.3 £7.77
QM30-1818 24 18 0.4 £7.84
QM30-3018 24 30 0.4 £8.05
QM31-1520 25 15 0.4 £8.64
QM31-2020 25 20 0.4 £8.64
QM31-2520 25 25 0.4 £9.64
QM31-3020 25 30 0.4 £12.44
QM32-1520 26 15 0.4 £8.79
QM32-2020 26 20 0.4 £8.79
QM32-2520 26 25 0.4 £10.91
QM33-1522 28 15 0.4 £7.77
QM33-2022 28 20 0.4 £8.88
QM33-2522 28 25 0.4 £10.45
QM33-3022 28 30 0.4 £10.94
QM34-2022 32 20 0.7 £13.27
QM34-5022 32 50 0.7 £29.24
Part
Number
Bore
Dia.
ØB G7
Outside
Dia.
ØD s7
QM35-2025
QM35-2525
QM35-3025
QM35-5025
QM36-2525
QM36-3525
QM36-5025
QM37-2030
QM37-2530
QM37-3030
QM38-2530
QM38-3530
QM38-5030
QM44-3040
QM44-4040
QM44-5040
QM45-2540
QM45-3040
QM45-3540
QM45-4040
QM45-5040
QM45-6040
QM46-3545*
QM46-4545*
QM46-5545*
QM47-3545*
QM47-4545*
QM47-5545*
QM48-3050*
QM48-3550*
QM48-4050*
QM48-5050*
QM49-5060*
QM49-6060*
QM50-5060*
QM50-6060*
QM50-7060*
Length
L js13
30
30
30
30
35
35
35
35
35
35
40
40
40
46
46
46
50
50
50
50
50
50
51**
51**
51**
55**
55**
55**
60**
60**
60**
60**
68**
68**
72**
72**
72**
20
25
30
50
25
35
50
20
25
30
25
35
50
30
40
50
25
30
35
40
50
60
35
45
55
35
45
55
30
35
40
50
50
60
50
60
70
Max.
f
Price Each
1-9
0.4 £8.64
0.4 £10.26
0.4 £11.79
0.4 £19.00
0.4 £12.60
0.4 £14.01
0.4 £20.37
0.4 £8.72
0.4 £9.84
0.4 £10.90
0.7 £12.97
0.7 £18.42
0.7 £23.59
0.4 £18.14
0.4 £21.22
0.4 £24.29
0.7 £18.20
0.7 £20.70
0.7 £22.79
0.7 £25.36
0.7 £31.23
0.7 £36.99
0.4 £22.46
0.4 £25.53
0.4 £28.73
0.7 £27.25
0.7 £35.35
0.7 £45.88
0.7 £35.21
0.7 £39.27
0.7 £42.88
0.7 £50.73
0.6 £42.62
0.6 £50.81
0.8 £59.83
0.8 £64.87
0.8 £70.22
* G8 Tolerance
** s8 Tolerance
BEARINGS
QT
Self-Lubricated : Inch Type, 0.1875" - 0.625" Bores
L
ØB
ØD
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20% | 200+ -25% | 500+ -30% | 1000+ -40% | 2000+ -45%
Part
Number
QT171-1
QT171-2
QT171-3
QT171-4
QT171-5
QT172-1
QT172-2
QT172-3
QT172-4
QT172-5
QT160-1
QT160-2
QT160-3
QT160-4
QT160-5
QT4-1
QT4-2
QT4-3
QT4-4
QT4-5
QT4-6
QT173-1
QT173-2
QT173-3
QT173-4
QT51-1
QT51-2
QT51-3
QT51-4
QT51-5
QT540-1
QT540-3
QT174-1
QT174-2
QT174-3
QT174-4
QT174-5
Bore Dia.
ØB
3/16" (0.1875")
3/16" (0.1875")
3/16" (0.1875")
3/16" (0.1875")
3/16" (0.1875")
1/4" (0.2500")
1/4" (0.2500")
1/4" (0.2500")
1/4" (0.2500")
1/4" (0.2500")
5/16" (0.3125")
5/16" (0.3125")
5/16" (0.3125")
5/16" (0.3125")
5/16" (0.3125")
3/8" (0.3750")
3/8" (0.3750")
3/8" (0.3750")
3/8" (0.3750")
3/8" (0.3750")
3/8" (0.3750")
7/16" (0.4375")
7/16" (0.4375")
7/16" (0.4375")
7/16" (0.4375")
1/2" (0.5000")
1/2" (0.5000")
1/2" (0.5000")
1/2" (0.5000")
1/2" (0.5000")
9/16" (0.5625")
9/16" (0.5625")
5/8" (0.6250")
5/8" (0.6250")
5/8" (0.6250")
5/8" (0.6250")
5/8" (0.6250")
Outside Dia.
ØD
Length
L
5/16" (0.3125")
1/4" (0.250")
5/16" (0.3125")
3/8" (0.375")
5/16" (0.3125")
1/2" (0.500")
5/16" (0.3125")
5/8" (0.625")
5/16" (0.3125")
3/4" (0.750")
3/8" (0.3750")
1/4" (0.250")
3/8" (0.3750")
3/8" (0.375")
3/8" (0.3750")
1/2" (0.500")
3/8" (0.3750")
5/8" (0.625")
3/8" (0.3750")
3/4" (0.750")
1/2" (0.5000")
1/4" (0.250")
1/2" (0.5000")
3/8" (0.375")
1/2" (0.5000")
1/2" (0.500")
1/2" (0.5000")
5/8" (0.625")
1/2" (0.5000")
3/4" (0.750")
1/2" (0.5000")
3/8" (0.375")
1/2" (0.5000")
1/2" (0.500")
1/2" (0.5000")
5/8" (0.625")
1/2" (0.5000")
3/4" (0.750")
1/2" (0.5000")
7/8" (0.875")
1/2" (0.5000")1" (1.000")
9/16" (0.5625")
3/8" (0.375")
9/16" (0.5625")
1/2" (0.500")
9/16" (0.5625")
5/8" (0.625")
9/16" (0.5625")
3/4" (0.750")
5/8" (0.6250")
1/2" (0.500")
5/8" (0.6250")
5/8" (0.625")
5/8" (0.6250")
3/4" (0.750")
5/8" (0.6250")
7/8" (0.875")
5/8" (0.6250")1" (1.000")
11/16" (0.6875")
1/2" (0.500")
11/16" (0.6875")
3/4" (0.750")
3/4" (0.7500")
1/2" (0.500")
3/4" (0.7500")
5/8" (0.625")
3/4" (0.7500")
3/4" (0.750")
3/4" (0.7500")
7/8" (0.875")
3/4" (0.7500")
1" (1.000")
Material
Tolerances
L ≤ 1 1/2" ±0.005", L > 1 1/2" ≤3" = ±0.010",
Lubrication
Price Each
1-9
£1.85
£1.85
£1.85
£1.85
£1.85
£2.03
£2.03
£2.03
£2.58
£2.58
£2.68
£2.68
£3.55
£3.55
£3.55
£2.08
£2.08
£2.68
£2.68
£3.10
£3.10
£2.22
£2.22
£2.73
£2.73
£2.32
£2.88
£2.88
£3.36
£3.36
£3.32
£3.98
£2.62
£3.19
£3.19
£3.80
£3.80
Performance
BEARINGS
QT
L
ØB
ØD
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20% | 200+ -25% | 500+ -30% | 1000+ -40% | 2000+ -45%
Part
Number
QT14-1
QT14-2
QT14-3
QT14-4
QT15-1
QT15-2
QT15-3
QT15-5
QT15-6
QT18-1
QT18-2
QT18-3
QT18-4
QT18-5
QT69-1
QT69-2
QT69-3
QT69-4
QT71-1
QT71-2
QT71-3
QT71-4
QT71-5
QT185-1
QT185-2
QT185-3
QT185-4
QT186-1
QT186-2
QT186-3
QT186-4
QT186-5
QT186-6
QT186-7
QT186-8
QT186-9
QT186-10
Features
Bore Dia.
ØB
Outside Dia.
ØD
Length
L
5/8" (0.625")
7/8" (0.875")
3/4" (0.750")
5/8" (0.625")
7/8" (0.875")
7/8" (0.875")
5/8" (0.625")
7/8" (0.875")1" (1.000")
5/8" (0.625")
7/8" (0.875")1 1/4" (1.250")
3/4" (0.750")
7/8" (0.875")
1/2" (0.500")
3/4" (0.750")
7/8" (0.875")
5/8" (0.625")
3/4" (0.750")
7/8" (0.875")
3/4" (0.750")
3/4" (0.750")
7/8" (0.875")1" (1.000")
3/4" (0.750")
7/8" (0.875")1 1/4" (1.250")
3/4" (0.750")1" (1.000")
5/8" (0.625")
3/4" (0.750")1" (1.000")
3/4" (0.750")
3/4" (0.750")1" (1.000")
7/8" (0.875")
3/4" (0.750")1" (1.000")1" (1.000")
3/4" (0.750")1" (1.000")1 1/4" (1.250")
7/8" (0.875")1" (1.000")
3/4" (0.750")
7/8" (0.875")1" (1.000")1" (1.000")
7/8" (0.875")
1" (1.000")1 1/4" (1.250")
7/8" (0.875")
1" (1.000")
1/2" (0.500")
7/8" (0.875")
1 1/8" (1.125")
3/4" (0.750")
7/8" (0.875")
1 1/8" (1.125")
7/8" (0.875")
7/8" (0.875")1 1/8" (1.125")1" (1.000")
7/8" (0.875")1 1/8" (1.125")1 1/4" (1.250")
7/8" (0.875")1 1/8" (1.125")
1/2" (0.500")
1" (1.000")1 1/8" (1.125")
3/4" (0.750")
1" (1.000")1 1/8" (1.125")1" (1.000")
1" (1.000")1 1/8" (1.125")1 1/4" (1.250")
1" (1.000")1 1/8" (1.125")
1/2" (0.500")
1" (1.000")1 1/4" (1.250")
3/4" (0.750")
1" (1.000")1 1/4" (1.250")
7/8" (0.875")
1" (1.000")1 1/4" (1.250")1" (1.000")
1" (1.000")1 1/4" (1.250")1 1/8" (1.125")
1" (1.000")1 1/4" (1.250")1 1/4" (1.250")
1" (1.000")1 1/4" (1.250")1 3/8" (1.375")
1" (1.000")1 1/4" (1.250")1 1/2" (1.500")
1" (1.000")1 1/4" (1.250")1 5/8" (1.625")
1" (1.000")1 1/4" (1.250")1 3/4" (1.750")
1" (1.000")1 1/4" (1.250")2" (2.000")
Other Info.
Price Each
1-9
£5.32
£6.57
£6.57
£7.81
£4.58
£3.75
£3.75
£4.42
£4.86
£5.70
£5.70
£7.05
£7.05
£8.56
£4.14
£4.70
£5.41
£6.37
£6.57
£8.61
£7.48
£9.88
£11.41
£4.47
£5.14
£5.99
£6.66
£7.31
£9.20
£9.20
£10.67
£10.67
£12.43
£12.43
£14.26
£14.26
£16.13
BEARINGS
QFM
Flanged Oilite® Bushes Oil Impregnated
L js13
r
M
ØB ØF
ØD
f
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20% | 200+ -25% | 500+ -30% | 1000+ -40% | 2000+ -45%
Part
Number
Bore Dia.
ØB G7
Length
L js13
Outside
Dia.
ØD s7
QFM3 2 3
QFM5 3 4
QFM6-44 4
QFM6-64 6
QFM6-8
4 8
QFM6-12
412
QFM7-45 4
QFM7-55 5
QFM7-85 8
QFM8-46 4
QFM8-66 6
QFM8-10
610
QFM9-87 8
QFM10-6
8 6
QFM10-8
8 8
QFM10-12
812
QFM10-16
816
QFM11-10
1010
QFM11-16
1016
QFM11-20
1020
QFM12-8
10 8
QFM12-10
1010
QFM12-16
1016
QFM12.5-12
1212
QFM12.5-16
1216
QFM12.5-20
1220
QFM13-8
12 8
QFM13-12
1212
QFM13-20
1220
QFM14-10
1410
QFM14-14
1414
QFM14-20
1420
QFM15-10
1510
QFM15-15
1515
Material
Flange
Dia.
ØF js13
5
6
8
8
8
8
9
9
9
10
10
10
11
12
12
12
12
15
15
15
16
16
16
15
15
15
18
18
18
20
20
20
21
21
Performance
Lubrication
Flange
Height
M js13
Max.
f
Max.
r
Price Each
1-9
8 1.50.30.3
£2.91
9 1.50.30.3
£2.91
12 2.00.30.3
£3.02
12 2.00.30.3
£3.02
12 2.00.30.3
£3.02
12 2.00.30.3
£3.02
13 2.00.30.3
£3.48
13 2.00.30.3
£3.48
13 2.00.30.3
£3.48
14 2.00.30.3
£3.48
14 2.00.30.3
£3.48
14 2.00.30.3
£3.48
15 2.00.30.3
£3.48
16 2.00.30.3
£3.79
16 2.00.30.3
£3.79
16 2.00.30.3
£3.79
16 2.00.30.3
£3.79
21 3.00.40.3
£3.79
21 3.00.40.3
£3.79
21 3.00.40.3
£3.79
22 3.00.40.3
£4.22
22 3.00.40.3
£4.22
22 3.00.40.3
£5.30
21 3.00.30.3
£5.30
21 3.00.30.3
£5.30
21 3.00.30.3
£5.30
24 3.00.40.3
£4.88
24 3.00.40.3
£4.88
24 3.00.40.3
£6.39
26 3.00.40.6
£5.37
26 3.00.40.6
£5.37
26 3.00.40.6
£6.57
27 3.00.40.6
£6.20
27 3.00.40.6
£6.20
Features
Other Info.
BEARINGS
QFM
L js13
r
M
ØB ØF
ØD
f
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20% | 200+ -25% | 500+ -30% | 1000+ -40% | 2000+ -45%
Part
Number
Bore Dia.
ØB G7
Length
L js13
Outside
Dia.
ØD s7
Flange
Dia.
ØF js13
Flange
Height
M js13
Max.
f
Max.
r
Price Each
1-9
QFM15-20
1520 2127 3.00.40.6
£7.91
QFM15-25
1525 2127 3.00.40.6
£7.91
QFM15.5-16
1616 2027 3.00.30.6
£6.20
QFM15.5-20
1620 2027 3.00.30.6
£6.20
QFM15.5-25
1625 2027 3.00.30.6
£6.20
QFM16-12
1612 2228 3.00.40.6
£6.57
QFM16-16
1616 2228 3.00.40.6
£6.57
QFM16-20
1620 2228 3.00.40.6
£6.57
QFM16-25
1625 2228 3.00.40.6
£8.86
QFM17-12
1812 2430 3.00.40.6
£6.99
QFM17-18
1818 2430 3.00.40.6
£9.05
QFM17-22
1822 2430 3.00.40.6
£9.05
QFM17-30
1830 2430 3.00.40.6
£12.23
QFM18-15
2015 2632 3.00.40.6
£8.16
QFM18-20
2020 2632 3.00.40.6
£9.81
QFM18-25
2025 2632 3.00.40.6
£12.16
QFM18-30
2030 2632 3.00.40.6
£14.17
QFM19-30
2530 3239 3.50.40.6
£11.09
QFM20-20
2520 3039 3.50.40.6
£8.77
QFM20-25
2525 3039 3.50.40.6
£9.62
QFM20-32
2532 3039 3.50.40.6
£12.33
QFM24-20
3020 3846 4.00.60.6
£12.01
QFM24-25
3025 3846 4.00.60.6
£13.55
QFM24-30
3030 3846 4.00.60.6
£16.31
QFM27-25
3525 4555 5.00.70.8
£17.94
QFM27-35
3535 4555 5.00.70.8
£23.11
QFM27-40
3540 4555 5.00.70.8
£26.00
QFM30-25
4025 5060 5.00.70.8
£30.57
QFM30-30
4030 5060 5.00.70.8
£32.14
QFM30-40
4040 5060 5.00.70.8
£35.21
QFM30-50
4050 5060 5.00.70.8
£37.91
QFM32-32
50*32 60**
70 5.00.70.8
£34.26
QFM32-40
50*40 60**
70 5.00.70.8
£36.78
QFM32-50
50*50 60**
70 5.00.70.8
£42.42
* = G8 Tolerance, ** = s8 Tolerance
Material
Features
Performance
2
2
Max. Static Load: 50N/mm . Max. Dynamic Load: 14N/mm . Max. Velocity: 5m/s.
Other Info.
Lubrication
BEARINGS
QF
L
M
ØB ØF
ØD
Discounts: 10+ -5% | 25+ -10% | 50+ -15% | 100+ -20% | 200+ -25% | 500+ -30% | 1000+ -40% | 2000+ -45%
Part
Number
Bore Dia.
ØB
Length
L
Outside Dia.
ØD
Flange Dia.
ØF
Flange Height
M
QF394-1
3/16" (0.1875")
1/4" (0.250")
5/16" (0.3125")
3/8" (0.375")0.062"
QF394-2
3/16" (0.1875")
3/8" (0.375")
5/16" (0.3125")
3/8" (0.375")0.062"
QF394-3
3/16" (0.1875")
1/2" (0.500")
5/16" (0.3125")
3/8" (0.375")0.062"
QF251-1
1/4" (0.2500")
1/4" (0.250")
3/8" (0.3750")
1/2" (0.500")0.062"
QF251-2
1/4" (0.2500")
3/8" (0.375")
3/8" (0.3750")
1/2" (0.500")0.062"
QF251-3
1/4" (0.2500")
1/2" (0.500")
3/8" (0.3750")
1/2" (0.500")0.062"
QF251-4
1/4" (0.2500")
3/4" (0.750")
3/8" (0.3750")
1/2" (0.500")0.062"
QF395-1
5/16" (0.3125")
1/4" (0.250")
1/2" (0.5000")
5/8" (0.625")0.062"
QF395-2
5/16" (0.3125")
3/8" (0.375")
1/2" (0.5000")
5/8" (0.625")0.062"
QF395-3
5/16" (0.3125")
1/2" (0.500")
1/2" (0.5000")
5/8" (0.625")0.062"
QF395-4
5/16" (0.3125")
3/4" (0.750")
1/2" (0.5000")
5/8" (0.625")0.062"
QF59-1
3/8" (0.3750")
1/2" (0.500")
1/2" (0.5000")
5/8" (0.625")0.140"
QF59-3
3/8" (0.3750")
7/8" (0.875")
1/2" (0.5000")
5/8" (0.625")0.140"
QF396-1
3/8" (0.3750")
3/8" (0.375")
5/8" (0.6250")
3/4" (0.750")0.125"
QF396-2
3/8" (0.3750")
1/2" (0.500")
5/8" (0.6250")
3/4" (0.750")0.125"
QF396-3
3/8" (0.3750")
5/8" (0.625")
5/8" (0.6250")
3/4" (0.750")0.125"
QF396-4
3/8" (0.3750")
3/4" (0.750")
5/8" (0.6250")
3/4" (0.750")0.125"
QF73-1
1/2" (0.5000")
1/2" (0.500")
5/8" (0.6250")
3/4" (0.750")0.098"
QF73-2
1/2" (0.5000")
1" (1.000")
5/8" (0.6250")
3/4" (0.750")0.098"
QF397-1
1/2" (0.5000")
1/2" (0.500")
3/4" (0.7500")
1" (1.000")0.125"
QF397-2
1/2" (0.5000")
3/4" (0.750")
3/4" (0.7500")
1" (1.000")0.125"
QF397-3
1/2" (0.5000")
1" (1.000")
3/4" (0.7500")
1" (1.000")0.125"
QF29-1
5/8" (0.6250")
1/2" (0.500")
3/4" (0.7500")1 1/8" (1.125")0.094"
QF29-2
5/8" (0.6250")
1" (1.000")
3/4" (0.7500")1 1/8" (1.125")0.094"
QF398-1
5/8" (0.6250")
1/2" (0.500")
7/8" (0.8750")1 1/4" (1.250")0.125"
QF398-2
5/8" (0.6250")
3/4" (0.750")
7/8" (0.8750")1 1/4" (1.250")0.125"
QF398-3
5/8" (0.6250")
1" (1.000")
7/8" (0.8750")1 1/4" (1.250")0.125"
QF399-1
3/4" (0.7500")
3/4" (0.750")1" (1.0000")1 3/8" (1.375")0.125"
QF399-2
3/4" (0.7500")
1" (1.000")1" (1.0000")1 3/8" (1.375")0.125"
QF399-3
3/4" (0.7500")1 1/4" (1.250")
1" (1.0000")1 3/8" (1.375")0.125"
QF400-1
7/8" (0.8750")
3/4" (0.750")
1 1/8" (1.1250")1 5/8" (1.625")0.125"
QF400-2
7/8" (0.8750")
1" (1.000")
1 1/8" (1.1250")1 5/8" (1.625")0.125"
QF400-3
7/8" (0.8750")1 1/4" (1.250")
1 1/8" (1.1250")1 5/8" (1.625")0.125"
QF400-4
7/8" (0.8750")1 1/2" (1.500")
1 1/8" (1.1250")1 5/8" (1.625")0.125"
QF2-21" (1.0000")
1" (1.000")
1 1/4" (1.2500")1 1/2" (1.500")0.125"
QF2-31" (1.0000")1 1/2" (1.500")
1 1/4" (1.2500")1 1/2" (1.500")0.125"
Material
Tolerances
L ≤1.1/2" = ±0.005", L >1.1/2" ≤3" = ±0.010". M = ±0.003". ØF = ±0.005".
ØB <1/2" = 0.002" (Max.), > 1/2" <1.1/2" = 0.003" (Max.), >1.1/2" = 0.004" (Max.).
Performance
Features
As previously.
Lubrication
Price Each
1-9
£3.57
£1.72
£4.03
£3.57
£1.91
£1.91
£4.86
£4.10
£2.68
£2.68
£5.25
£4.42
£7.10
£3.57
£3.57
£3.57
£3.57
£4.90
£7.86
£4.65
£4.65
£5.46
£5.03
£8.14
£4.98
£8.56
£6.43
£6.13
£7.25
£9.29
£6.47
£7.59
£9.11
£18.66
£17.23
£23.25
Other Info.
BEARINGS
Oilite® Bushes
METRIC STOCK TOLERANCES
Plain Bushes:
Length L is js13.
Concentricity : Full indicated movement.
D with respect to d: D <= 50mm, IT9 : D> 50mm, IT10.
Flanged Bushes:
Length L is js13.
Flange Thickness: e is js13.
Flange Diameter: D is js13.
Concentricity: Full indicated movement.
D with respect to d : D<=50mm, IT9 D> 50mm, IT10.
Chamfers: 45° chamfers are incorporated on inside and outside diameters
at each end of the bush. Chamfer length varies with bush wall thickness and
outside diameter.
CAUTION: IN THE E.C. THERE ARE AT LEAST THREE ‘STANDARDS’ COVERING
DIMENSIONS AND TOLERANCES OF METRIC BUSHES.
All the metric (ISO) bushes in this catalogue are manufactured to the tolerances set
out in ISO 2795 - plain bushes from sintered material.
ISO 2795 is the standard used by the BSI for this type of bearing; it is also widely
used in other European countries.
Bushes conforming to other metric standards used in the E.C. are available in
Britain; bushes made to these other standards may not suit the ISO 2795 fitting
requirements and vice versa. Incompatibility may result in bearing seizure or much
reduced life, therefore great care must be taken in selecting matched bearing,
housing, fitting-pin and shaft sizes.
We can supply bushes to meet other standards.
Quotes available upon request.
Lubrication: Standard Oilite® bushes are impregnated with highly refined mineral
oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant,
anti-rust and defoamant additives.
A replenishment of oil should be carried out after 1000 hours of use or yearly. These
intervals can be extended for bushes with relatively thick walls and shortened for
low porosity bushes. Bushes running submerged in oil or in oil-splash will not
require replenishment.
The standard operating range is -9°C to 70°C.
To prevent possible seizures with Stainless Steel or hard-chromium plated shafts,
an addition of molybdenum disulphide to the impregnation oil must be specified
at extra cost.
However, here are some basic rules:
1) Low viscosity oil for low temperatures, high speeds or light loads.
2) High viscosity oil for high temperatures, low speeds or heavy loads.
3) High viscosity index oil for wide variations in operating temperatures.
4) Oxidation stable oils for long-period usage.
5) Oil with ‘oiliness’ additives for boundary conditions.
6) Oil of lesser ‘oiliness’ for full film (hydrodynamic) conditions.
7) Oil with Extreme Pressure (E.P.) additives for very heavy or shock loads.
Fitting: before fitting make sure that all sharp edges are removed from the housing
and mating shaft. The bearing must be free from grit and dust. Wash in oil if storage
conditions are in doubt and re-oil if held in stock for more than a year or if stored in
contact with an absorbent material.
Always use steady pressure to insert the bearing. Never use hammer blows.
Shafts should ideally be hardened to approximately HRC 60 and ground to a surface
roughness of Ra=0.25µm.
The standard metric range of Oilite® bushes to ISO 2795 is made to G7/s7 limits of
tolerance. These bushes when fitted into a rigid H7 housing, using an m5 fitting pin,
will give an H7 bore, which when run on an f7 shaft will give good performance.
Storage: Oilite® bushes can be stored for considerable periods without
deterioration or loss of oil if kept in a metal or other nonabsorbent container, at
room temperature. Proximity to heat could cause oil loss by sweating, in which case
re-oiling is necessary before fitting.
Re-oiling: after machining of the bearing, or following oil loss during storage,
immerse in high quality mineral oil to ISO VG 60 or ISO VG 150 (SAE30 or SAE40) at
80°C to 100°C for 10 to 15 minutes and then cool in cold oil.
Plain And Flanged Bushes - Tolerances
Flanged Bushes - Radii
Nominal
Sizes
Up to
3
6
10
18
30
50
80
(between outside diameter
and flange face)
Outside
r
Diameter
max
≤12
0.3
>12 ≤30
0.6
>30
0.8
Over
3
6
10
18
30
50
IT9
0.025
0.030
0.036
0.043
0.052
0.062
-
Standard
Tolerances
IT10
0.120
js13
±0.070
±0.090
±0.110
±0.135
±0.165
±0.195
±0.230
Nearest Equivalent Specifications
Material
Oilite®
Bronze
Grade
UK BS5600
France
ISO 5755/1
Part 5
NF 150
1987
Section 5.1
5755/1
1988
A95-771-1
Germany
DIN
30 910
PART 3
U.S.A.
M.P.I.F.
STAND. 35
S.A.E.
MB01-1
P4011Z
P4011Z
FU-E10-60
-
CT-1000-K19
840
MB01-2
P4012Z
P4011Z
FU-E10-64
Sint A50
CT-1000-K26
841
A.S.T.M.
B438 Grd 1
Type 1
B438 Grd 1
Type 2
Material Specifications
Chemical Composition
(4)
MB
Grade
MB01-1
MB01-2
C
Total
<0.3%
<0.3%
Cu
Sn
Balance
Balance
9-11%
9-11%
Mechanical & Physical Properties
(1)
Static
Total
(1)
(1)
(2) Radial
(3)
Other
Open
Oil
Crushing Density P Load
Max. Pv Factor
Elements Porosity Content Strength K Min. Nominal
N/mm2
g/cm3
N/mm2 N/mm2 x m/s
Max.
P Min.
Min.
2%
27%
24%
120
6.0
35
1.8
2%
22%
20%
160
6.4
50
1.8
MB01-1: Applicable to bars, cored bars and plate material
MB01-2: Applicable to metric bushes.
Coefficient of Friction: Bronze on steel = 0.12 Static, 0.06 Dynamic
Other bearing materials for special applications are also available.
T E C H N I C A L
Tolerances
Notes :
1. Density, oil content and open porosity determined according to BS5600 Pt. 3
Section 3.2 1988.
2. Radial crushing strength according to BS5600 Pt. 3 Section 3.9 1979.
3. PV factor = Pressure(Nmm2) x bearing surface velocity (m/s) where
pressure = load (N) / projected area (d x L) and d = inside diameter (mm).
4. Bars, cored bars and plates may contain up to 1°C.
BEARINGS
Oilite® Bushes
Fitting Data for Metric QM & QFM
T E C H N I C A L
R
ØDp
ØB
ØD
ØdH
Fitting Pin
R
Free Bush (QFM/QM)
R
ØdF
Housing
ØDs
Shaft
Fitted Bush
Basic Sizes
Bore ØB
ØD
2
3
4
5
6
7
8
10
10
10
12
12
12
14
15
15
16
16
18
20
20
22
25
25
28
30
32
32
35
38
40
40
5
6
8
9
10
11
12
13
15
16
15
17
18
20
19
21
20
22
24
24
26
28
30
32
36
38
38
40
45
48
46
50
Basic Sizes
Bore Ød
ØD
42
45
50
52
55
60
ØdH (H7)
Min.
Max.
5.000
6.000
8.000
9.000
10.000
11.000
12.000
13.000
15.000
16.000
15.000
17.000
18.000
20.000
19.000
21.000
20.000
22.000
24.000
24.000
26.000
28.000
30.000
32.000
36.000
38.000
38.000
40.000
45.000
48.000
46.000
50.000
5.012
6.012
8.015
9.015
10.015
11.018
12.018
13.018
15.018
16.018
15.018
17.018
18.018
20.021
19.021
21.021
20.021
22.021
24.021
24.021
26.021
28.021
30.021
32.025
36.025
38.025
38.025
40.025
45.025
48.025
46.025
50.025
ØdH (H7)
Min.
Max.
52.000
55.000
60.000
52.030
55.030
60.030
ØDp (m5)
Min.
Max.
2.002
3.002
4.004
5.004
6.004
7.005
8.005
10.005
10.005
10.005
12.006
12.006
12.006
14.006
15.006
15.006
16.006
16.006
18.006
20.007
20.007
22.007
25.007
25.007
28.007
30.007
32.009
32.009
35.009
38.009
40.009
40.009
2.006
3.006
4.009
5.009
6.009
7.012
8.012
10.012
10.012
10.012
12.015
12.015
12.015
14.015
15.015
15.015
16.015
16.015
18.015
20.017
20.017
22.017
25.017
25.017
28.017
30.020
32.020
32.020
35.020
38.020
40.020
40.020
ØDp (m5)
Min.
Max.
42.009
45.009
50.009
42.020
45.020
50.020
ØdF (H7)
Min.
Max.
2.000
3.000
4.000
5.000
6.000
7.000
8.000
10.000
10.000
10.000
12.000
12.000
12.000
14.000
15.000
15.000
16.000
16.000
18.000
20.000
20.000
22.000
25.000
25.000
28.000
30.000
32.000
32.000
35.000
38.000
40.000
40.000
2.010
3.010
4.012
5.012
6.012
7.015
8.015
10.015
10.015
10.015
12.018
12.018
12.018
14.018
15.018
15.018
16.018
16.018
18.018
20.021
20.021
22.021
25.021
25.021
28.021
30.021
32.025
32.025
35.025
38.025
40.025
40.025
ØdF (H8)
Min.
Max.
42.000
45.000
50.000
42.039
45.039
50.039
ØDs (f7)
Min.
Max.
1.984
2.984
3.978
4.978
5.978
6.972
7.972
9.972
9.972
9.972
11.966
11.966
11.966
13.966
14.966
14.966
15.966
15.966
17.966
19.959
19.959
21.959
24.959
24.959
27.959
29.959
31.950
31.950
34.950
37.950
39.950
39.950
1.994
2.994
3.990
4.990
5.990
6.987
7.987
9.987
9.987
9.987
11.984
11.984
11.984
13.984
14.984
14.984
15.984
15.984
17.984
19.980
19.980
21.980
24.980
24.980
27.980
29.980
31.975
31.975
34.975
37.975
39.975
39.975
ØDs (f8)
Min.
Max.
41.950
44.950
49.950
Chamfers are incorporated on inside and outside diameters at each end of the bush.
41.975
44.975
49.975
BEARINGS
Oilite® Bushes
R
ØDp
ØB
ØD
Fitting Pin
Free Bush (QF/QT)
R
ØdF
ØDs
Shaft
Fitted Bush
Basic Sizes
Bore ØB
ØD
3/16"
1/4"
5/16"
5/16"
3/8"
3/8"
3/8"
3/8"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
7/16"
7/16"
1"
1"
1 1/8"
1 1/4"
1 1/4"
1 3/8"
1 1/2"
1 1/2"
5/16"
3/8"
1/2"
9/16"
1/2"
1/2"
9/16"
5/8"
9/16"
5/8"
3/4"
3/4"
7/8"
1"
1"
1 1/8"
1 1/4"
1 1/4"
1 3/8"
1 1/2"
1 5/8"
1 5/8"
1 3/4"
1 7/8"
ØdH (H8)
Min.
Max.
0.3125"
0.3750"
0.5000"
0.5625"
0.5000"
0.5000"
0.5625"
0.6250"
0.5625"
0.6250"
0.7500"
0.7500"
0.8750"
1.0000"
1.0000"
1.1250"
1.2500"
1.2500"
1.3750"
1.5000"
1.6250"
1.6250"
1.7485"
1.8750"
0.3134"
0.3759"
0.5010"
0.5635"
0.5010"
0.5010"
0.5635"
0.6260"
0.5635"
0.6260"
0.7512"
0.7512"
0.8762"
1.0012"
1.0012"
1.1262"
1.2516"
1.2516"
1.3766"
1.5016"
1.6266"
1.6266"
1.7502"
1.8766"
Min.
ØDp
0.1877"
0.2502"
0.3127"
0.3116"
0.3752"
0.3752"
0.3744"
0.3752"
0.4390"
0.4997"
0.5002"
0.6266"
0.6252"
0.7502"
0.8752"
0.8752"
1.0002"
1.0007"
1.1252"
1.2502"
1.2502"
1.3740"
1.5012"
1.5002"
Max.
0.1879"
0.2504"
0.3129"
0.3118"
0.3754"
0.3754"
0.3746"
0.3754"
0.4392"
0.4999"
0.5005"
0.6269"
0.6255"
0.7505"
0.8755"
0.8755"
1.0006"
1.0010"
1.1256"
1.2506"
1.2506"
1.3744"
1.5016"
1.5006"
Min.
0.1875"
0.2500"
0.3125"
0.3114"
0.3750"
0.3750"
0.3742"
0.3750"
0.4388"
0.4995"
0.5000"
0.6264"
0.6250"
0.7500"
0.8750"
0.8750"
1.0000"
1.0050"
1.1250"
1.2500"
1.2500"
1.3738"
1.5010"
1.5000"
ØdF
Max.
0.1883"
0.2504"
0.3127"
0.3121"
0.3756"
0.3752"
0.3748"
0.3758"
0.4401"
0.5001"
0.5009"
0.6275"
0.6259"
0.7512"
0.8761"
0.8761"
1.0012"
1.0017"
1.1262"
1.2514"
1.2515"
1.3752"
1.5020"
1.5015"
Tol.
H8
H8
H8
H8
H8
H8
J8
H8
H8
H8
H8
H8
H8
H8
H8
H8
F8
H8
Min.
0.1866"
0.2489"
0.3114"
0.3100"
0.3739"
0.3739"
0.3739"
0.3759"
0.4376"
0.4981"
0.4987"
0.6251"
0.6237"
0.7484"
0.8737"
0.8737"
0.9984"
0.9993"
1.1234"
1.2480"
1.2480"
1.3720"
1.4990"
1.4980"
ØDs
Max.
0.1871"
0.2495"
0.3120"
0.3109"
0.3745"
0.3745"
0.3745"
0.3745"
0.4383"
0.4988"
0.4994"
0.6258"
0.6244"
0.7492"
0.8744"
0.8744"
0.9994"
1.0000"
1.1244"
1.2490"
1.2490"
1.3730"
1.5000"
1.4990"
Tol.
f7
f7
f7
d8
f7
f7
d8
f7
k7
e7
f7
k7
f7
f7
f7
f7
f7
h7
f7
f7
f7
e7
h7
f7
T E C H N I C A L
Fitting Data for Imperial QT & QF
Chamfers are incorporated on inside and outside diameters at each end of the bush.

bearings - Ondrives

Transcription

Similar documents

sintered bearings