• RELOADING • SHOOTING • STALKING •

Transcription

RELOADING
S O L U T I O N S
• RELOADING • SHOOTING • STALKING •
I
INDEX
NEW Products
Action Cleaning Tool Set . . . . . . . . . . . . . . . 56
Books
SPEER Reloading Manual No.13 . . . . . . . 63
Hodgdon Data Manual 27th Edition . . . . 63
Hornady Reloading Handbook 5th Ed . . 63
The Benchrest Shooting Primer . . . . . . . 63
Vihtavouri 3rd Ed Reloading Manual . . . 79
Bore Tech Cleaning Rods . . . . . . . . . . . . . . 43
Bore Tech Patch Hog . . . . . . . . . . . . . . . . . . 43
BRASS:
Lapua . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Norma. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
RWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Sellier & Bellot . . . . . . . . . . . . . . . . . . . . . 16
BULLETS:
Barnes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Combined Technology. . . . . . . . . . . . . . . . . 7
Hornady SST . . . . . . . . . . . . . . . . . . . . . . . . . 5
Lapua . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Swift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Trophy Bonded . . . . . . . . . . . . . . . . . . . . . . 10
Butler Creek Scope Covers . . . . . . . . . . . . . 58
Butler Creek Slings . . . . . . . . . . . . . . . . . . . . 60
Butler Creek Sling Swivels . . . . . . . . . . . . . 60
Chapman Screwdriver Kits . . . . . . . . . . . . . 57
Dewey Cleaning Equipment . . . . . . . . . . . . 51
Dunrud Bag Stabilizer . . . . . . . . . . . . . . . . . 15
EJS Kwick Case Trimmer . . . . . . . . . . . . . . 56
Harrell’s Precision Powder Measures . . . 65
Harrell’s Precision Reloading Presses . . . 65
Hornady Cam-Lock Case Trimmer . . . . . . . 83
J B Compound . . . . . . . . . . . . . . . . . . . . . . . . 52
LEE Deluxe Rifle Dies . . . . . . . . . . . . . . . . . . 21
LEE Zip Trim . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Mountain Plains Targets . . . . . . . . . . . . . . . 71
MTM 60 Series Ammo Boxes . . . . . . . . . . . 46
MTM Handloader’s Log . . . . . . . . . . . . . . . . 47
MTM Ammo Box Foam Liners. . . . . . . . . . . 47
Outdoor Edge Griz Saw . . . . . . . . . . . . . . . . 44
Outdoor Edge Wedge . . . . . . . . . . . . . . . . . . 45
Outdoor Edge Wedge II . . . . . . . . . . . . . . . . 45
RCBS Reloader Special-5 Press . . . . . . . . . 30
RCBS Reloading Kits. . . . . . . . . . . . . . . . . . . 30
RCBS Turret Press & PRO 2000 . . . . . . . . . . 31
RCBS Ammomaster Press . . . . . . . . . . . . . . 31
RCBS APS Hand Priming Tool. . . . . . . . . . . 34
RCBS RC-130 Scale . . . . . . . . . . . . . . . . . . . . 35
RCBS 10-10 Scale . . . . . . . . . . . . . . . . . . . . . 35
RCBS X Dies . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Redding Instant Indicator . . . . . . . . . . . . . . 83
RS Cleaning Rod Stops . . . . . . . . . . . . . . . . . 51
RS Deburring Tool Holder . . . . . . . . . . . . . . 65
RS Solvent Bottles. . . . . . . . . . . . . . . . . . . . . 52
Smarter Powder Funnel Kit . . . . . . . . . . . . . 56
Software:
Barnes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
RCBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Sierra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Stalking Accessories
Charlybox . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Deer Calls . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Deer Carcass Sacks . . . . . . . . . . . . . . . . . 67
Deer Carcass Box . . . . . . . . . . . . . . . . . . . 68
Deer Carcass Insect Nets . . . . . . . . . . . . 82
FAC/Shotgun Certificate Holders . . . . . . 69
Hunting Tripod . . . . . . . . . . . . . . . . . . . . . . 69
Insect Repellent . . . . . . . . . . . . . . . . . . . . . 67
Leather Rifle Slings . . . . . . . . . . . . . . . . . . 69
Rifle Bolt Sheaths . . . . . . . . . . . . . . . . . . . 69
Seat Cushions . . . . . . . . . . . . . . . . . . . . . . . 67
Trophy Cutting Jig . . . . . . . . . . . . . . . . . . . 68
Trophy Shields & Clamps . . . . . . . . . . . . . 68
Washbox . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Stoney Point Cleaning Cradle . . . . . . . . . . . 41
Stoney Point Laser Magic . . . . . . . . . . . . . . 42
Stoney Point Sight Lines . . . . . . . . . . . . . . . 42
Stoney Point Porta-Range II . . . . . . . . . . . . 43
Wilson Case Trimmer . . . . . . . . . . . . . . . . . . 65
Wooden Loading Blocks . . . . . . . . . . . . . . . 57
N
D
E
X
INDEX BY ITEM
Action Cleaning Tools . . . . . . 43,48,56
Loading Blocks . . . . . . . . . . . . . . 47,57
Ammo Boxes . . . . . . . . . . . . . . . . . . 46
Lubricants, Gun . . . . . . . . . . . . . . . . 52
Bench Organiser . . . . . . . . . . . . . . . 57
Lubricants, Case Neck . . . . . . . . . . 53
Bipods . . . . . . . . . . . . . . . . . . 39,43,69
Lug Recess Tools. . . . . . . . . . . . . 43,48
Books . . . . . . . . . . . . . . . . . . . . . . . . 63
Mandrels . . . . . . . . . . . . . . . . . . . . . 64
Boresighter . . . . . . . . . . . . . . . . . . . 57
Media . . . . . . . . . . . . . . . . . . . . . . . 53
Brass . . . . . . . . . . . . . . . . . . . . . . . . 16
Micrometers . . . . . . . . . . . . . 32,55,76
Brass Polish . . . . . . . . . . . . . . . . . . . 53
Neck Turning Tools & Accs . . . . . . . 64
Brushes & Mops . . . . . . . . . . 48,49,51
Patches, Cotton . . . . . . . . . . . . . . 48,51
Brushes, Neck . . . . . . . . . . . . . . . . . 32
Pilot Stops . . . . . . . . . . . . . . . . . . . . 36
Bulbs, flashlights . . . . . . . . . . . . 73,75
Propellant . . . . . . . . . . . . . . . . . . 17,18
Bulbs, spotlights . . . . . . . . . . . . . . . 66
Powder Measures & Accs 20,29,36,65
Bullet Comparators . . . . . . . . . . . 40,79
Powder Tricklers . . . . . . . . . . . . . 29,35
Bullet Pullers . . . . . . . . . . . . . 32,47,54
Primer Pocket Uniformers . . . . . . . . 64
Bullets . . . . . . . . . . . . . . . . .4-13,77,83
Primer Sealant . . . . . . . . . . . . . . . . 18
Bushings for Dies . . . . . . . . . . . . . . 24
Primer Trays . . . . . . . . . . . . . . . . 34,47
Calipers . . . . . . . . . . . . . . . . . . . . 32,76
Primers . . . . . . . . . . . . . . . . . . . . . . 18
Cartridge Holders . . . . . . . . . . . . 67,69
Priming Tools . . . . . . . . . . . . . 20,34,54
Case Lube Pad. . . . . . . . . . . . . . . . . 32
Recoil Shields . . . . . . . . . . . . . . . . . 50
Case Lubes & Cleaners . . . . . . . . 32,53
Range Box . . . . . . . . . . . . . . . . . . . . 53
Case Prep Centre . . . . . . . . . . . . . . 33
Reloading Dies . . . . . . . . .22,24-28,37
Case Trimmers & Accs 21,55,56,65,83
Reloading Presses . . . . 19,23,30,31,65
Chamber Cleaning Rods . . . . . . . . . 51
Rests, Rifle . . . . . . . . . . . . . . . . . . . 38
Cleaning Cradles and Vises . . . . 41,50
Rest Bags . . . . . . . . . . . . . . . . . . 14,15
Cleaning Rods . . . . . . . . . . . . 43,49,51
Rifle Bolt Sheaths . . . . . . . . . . . . . . 69
Cleaning Rod Stops. . . . . . . . . . . . . 51
Rifle Cheekpieces . . . . . . . . . . . . . . 56
Cleaning Supplies & Accs . . 43,48-53
Rod Guides . . . . . . . . . . . . . . . . . 41,49
Closeouts . . . . . . . . . . . . . . . . . . . . 78
Rust Inhibitors . . . . . . . . . . . . . . . . . 52
Competition Bushing Dies . . . . . 24,27
Sand . . . . . . . . . . . . . . . . . . . . . . . . 15
Competition Bullet Seaters. . . . . 24,27
Saws, Hunting . . . . . . . . . . . . . . . . . 44
Cotton Cloths . . . . . . . . . . . . . . . . . 49
Scale Check Weights . . . . . . . . . . . 35
Deburring Tools, Case . . . . 20,23,36,65
Scales, Powder & Bullet . . . . 19,29,35
Deburring Tools, Flash Hole . . . . 36,64
Screwdrivers . . . . . . . . . . . . . . . . 55,57
Decapping Punches & Dies . . . . 21,32
Scope Accessories . . . . . . . . 56,58,59
Deer Carcass Boxes . . . . . . . . . . . . 68
Seat Cushions . . . . . . . . . . . . . . . . . 67
Deer Carcass Sacks . . . . . . . . . . . . 67
Seating Depth Tools . . . . . . . . . . 40,79
Die Wrench . . . . . . . . . . . . . . . . . . . 36
Shellholders . . . . . . . . . . . . . 21,25,37
Equipment Covers . . . . . . . . . . . . 30,35
Shooting Sticks . . . . . . . . . . . . . . . . 69
FAC/Shotgun Cert. Holder . . . . . . . 69
Slings & Swivels . . . . . . . . . . . . . 60,61
Forming Dies . . . . . . . . . . . . . . . . 26,28
Snap Caps . . . . . . . . . . . . . . . . . . . . 76
Game Calls . . . . . . . . . . . . . . . . . . . 70
Software . . . . . . . . . . . . . . . . . . . 13,63
Flashlights . . . . . . . . . . . . . . . 72,74,75
Solvents . . . . . . . . . . . . . . . . . . . . . 52
Funnels . . . . . . . . . . . . . . . . . 20,35,56
Spotlights . . . . . . . . . . . . . . . . . . . . 66
Gun Care Products . . . . . . . . . . . 52,53
Stock Boot . . . . . . . . . . . . . . . . . . . . 57
Headspace Gauges . . . . . . . . . . . 40,79
Stock Protectors . . . . . . . . . . . . . . . 50
Insect Repellent . . . . . . . . . . . . . . . 67
Stuck Case Remover Kit . . . . . . . . . 29
Insect Repellent Clothing . . . . . . . . 62
Target Knobs . . . . . . . . . . . . . . . . . . 42
Jags . . . . . . . . . . . . . . . . . . . . 48,49,51
Targets & Target Spots . . . . . . . . . . 71
Knife Sharpeners . . . . . . . . . . . . . . 45
Trophy Shields . . . . . . . . . . . . . . . . . 68
Knives . . . . . . . . . . . . . . . . . . . . . 44,45
Target Stand . . . . . . . . . . . . . . . . . . 43
Latex Gloves . . . . . . . . . . . . . . . . . . 68
Tumblers . . . . . . . . . . . . . . . . . . . . . 53
Load Labels & Liners . . . . . . . . . . . 47
Washbox . . . . . . . . . . . . . . . . . . . . . 67
MANUFACTURERS
INDEX
Armsport . . . . . . . . . . . . . . . . . . . . . 76
Barnes . . . . . . . . . . . . . . . . . . . . . 10,63
Berger Bullets . . . . . . . . . . . . . . . . . . 4
Birchwood Casey . . . . . . . . . . . . . . 71
Bore Tech . . . . . . . . . . . . . . . . . . . . 43
Bug-Me-Not . . . . . . . . . . . . . . . . . . 62
Butler Creek . . . . . . . . . . . . . . . .58-60
CCI . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapman . . . . . . . . . . . . . . . . . . . . . 57
Dewey . . . . . . . . . . . . . . . . . . . . . . . 51
EJS . . . . . . . . . . . . . . . . . . . . . . . . . 56
EZ Systems . . . . . . . . . . . . . . . . . . . 53
Federal . . . . . . . . . . . . . . . . . . . . 16,18
Gammon . . . . . . . . . . . . . . . . . . . . . 57
George & Roys . . . . . . . . . . . . . . . . 18
Harrell's Precision . . . . . . . . . . . . . . 65
Harris . . . . . . . . . . . . . . . . . . . . . . . . 39
Hart, R.W. . . . . . . . . . . . . . . . . . . . . 57
Hodgdon . . . . . . . . . . . . . . . . 17,63,76
Hornady . . . . . . . . . . . . . . . . . . . . 54,63
Hunters of England . . . . . . . . . . . . . 56
IMR . . . . . . . . . . . . . . . . . . . . . . . . . 17
JB . . . . . . . . . . . . . . . . . . . . . . . . . . 52
K&M . . . . . . . . . . . . . . . . . . . . . . 64,83
Kano . . . . . . . . . . . . . . . . . . . . . . . . 52
Lapua . . . . . . . . . . . . . . . . . . . . . . 10,16
LEE . . . . . . . . . . . . . . . . . . . . . . . .19-22
Lightforce . . . . . . . . . . . . . . . . . . . . 66
Lyman . . . . . . . . . . . . . . . . . . . . . . . 55
Mag Instrument . . . . . . . . . . . . .72-75
Mountain Plains . . . . . . . . . . . . . . . 71
MTM . . . . . . . . . . . . . . . . . . . . . .46-47
Norma . . . . . . . . . . . . . . . . . . . . . 16,77
Nosler . . . . . . . . . . . . . . . . . . . . 6-7,63
OLT. . . . . . . . . . . . . . . . . . . . . . . . . . 70
Outdoor Edge . . . . . . . . . . . . . . .44-45
PAST . . . . . . . . . . . . . . . . . . . . . . . . 50
Primos . . . . . . . . . . . . . . . . . . . . . . . 70
Pro-Shot . . . . . . . . . . . . . . . . . . .48-49
Protektor . . . . . . . . . . . . . . . . . . .14-15
RCBS . . . . . . . . . . . . . . . . . . . 30-37,63
Redding . . . . . . . . . . . . . . . . . 23-29,83
Remington . . . . . . . . . . . . . . . 10,16,18
RWS . . . . . . . . . . . . . . . . . . . . . . 16,77
Sellier & Bellot . . . . . . . . . . . . . . . . 16
Sierra . . . . . . . . . . . . . . . . . 12,13,63,83
Speer . . . . . . . . . . . . . . . . . . . . . 8-9,63
Spyderco . . . . . . . . . . . . . . . . . . . . . 45
Stack-On . . . . . . . . . . . . . . . . . . . . . 57
Stoney Point . . . . . . . . . . . . . . . .40-43
Swift Bullets . . . . . . . . . . . . . . . . . . 11
Tasco . . . . . . . . . . . . . . . . . . . . . . . . 57
Trophy Bonded Bullets . . . . . . . . . . 10
Uncle Mike’s . . . . . . . . . . . . . . . . 61,67
Ventco (Shooter’s Choice) . . . . . . . . 52
Vihtavouri . . . . . . . . . . . . . . . . . . 18,83
Wilson, L.E. . . . . . . . . . . . . . . . . . . . 65
Winchester . . . . . . . . . . . . . . . . . . . 16
Woodleigh Bullets . . . . . . . . . . . . . 10
Mozambique - Merkel .470 N.E.,
Woodleigh 500 gr. Weldcore Solid
Dear Customers and Friends
Welcome to our new Reloading Catalog. Many long hours have been spent on the design, composition and editing of this totally new edition which we hope you will enjoy browsing.
Many new products have also been included with better photographs which we hope will make
the task of selecting the right product easier for you. Whether you’re a first time customer or an
old friend, you will find that we strive to give you our best, each and every time. For those of you
that have access to the internet we are working towards completing our website and hope to have
it up and running soon.
Customer satisfaction is the ultimate goal of any successful company and it is on this that we
have built our reputation, along with providing you our customer with the widest choice of
reloading and shooting accessories in the UK today. We are proud of our friendly customer
service, genuine honest advice and our sheer desire to constantly improve on the service we provide. Many of our regular customers have already highly commended the service that they have
received from us, but why don’t you be the ultimate judge of that yourself.
Finally, I would like to take this opportunity to thank all our customers for their loyal and continued support and to those that have recommended us to their shooting friends. Many thanks.
Sit back, relax and enjoy this catalog.
“May the wind blow light
and your groups shoot tight”
Aftab Hamid
Catalog design by Aftab Hamid
Reloading Solutions and Aftab Hamid neither
accept nor assume responsibility or liability for
any consequential injuries or damages which
may result from the use of any product shown
in this catalog.
Contact us at:
Reloading Solutions Limited
6, Cherwell Business Centre • Rowles Way • Kidlington • OX5 1LA • England
TEL: +44 (0)1865 378200 • FAX: +44 (0)1865 370123
www.reloadingsolutions.com • email: [email protected]
All rights reserved. No part of this publication
may be reproduced, stored in a retrieval system
or transmitted, in any form or by any means:
electronic, mechanical, photocopying, recording, etc. without the prior written consent of
the publisher.
All Trade Marks and Logos are the property of
their respective owners.
© Copyright 2007 by Aftab Hamid
Published by: Reloading Solutions 2001
BERGER BULLETS
NOTE:
SINCE THESE ARE CUSTOM BULLETS, THERE MAY TIMES WHEN
CERTAIN BULLETS ARE NOT AVAILABLE DUE TO HIGH DEMAND,
A LIMITED AVAILABILITY OF QUALITY BULLET JACKETS AND AN
ANNUAL STAGGERED PRODUCTION SCHEDULE.
Berger bullets offer a wide selection of custom bullets for the competition shooter and dedicated varmint hunter searching the “extra edge” in
shooting performance. All Berger bullets are manufactured using J4 jackets–the finest available with near perfect wall concentricity. A large percentage of Berger bullets are available coated with molybdenum disulfide (moly). One of the noticeable benefits of using moly-coated bullets is
that barrels are easier and quicker to clean. You may have to increase your powder charge due to the pressure reducing characteristics of using
moly-coated bullets. All bullets are coated by Berger Bullets following the manufacturing process.
BERGER MATCH BULLETS
NON - COATED
A
LO DI
S
N
SO
4
LU
FB
FB
FB
FB
FB
VLD
FB
FB
FB
FB
FB
FB
FB
FB
VLD
LTB
LTB
VLD
VLD
FB
FB
FB
FB
BT
LD
FB
LD
FB
BT
FB
FB
LD
BT
VLD
LTB
VLD
VLD
FB
FB
FB
FB
FB
VLD
VLD
VLD
FB
FB
FB
FB
LTB
VLD
LTB
VLD
VLD
VLD
VLD
VLD
17 Calibre .172” diameter
BG 1720M *
20 gr
BG 1725M *
25 gr
BG 1730M *
30 gr
BG 2240M
40 gr
BG 2245M
45 gr
BG 2250M
50 gr
BG 2252M
52 gr
BG 2255M
55 gr
BG 2260M
60 gr
BG 2262M
62 gr
BG 2264M
64 gr
BG 2270VM
70 gr
BG 2270TM
70 gr
BG 2273M
73 gr
BG 2275VM
75 gr
BG 2280VM
80 gr
6mm .243” diameter
BG 2460M
60 gr
BG 2462M
62 gr
BG 24651M
65 gr
BG 24652SM
65 gr Short
BG 24653BM
65 gr
BG 2466LM
66 gr
BG 2468M
68 gr
BG 2469LM
69 gr
BG 2470M
70 gr
BG 2471M
71 gr
BG 2474M
74 gr
BG 2480M
80 gr
BG 2488LM
88 gr
BG 2490BM
90 gr
BG 2495VM
95 gr
BG 24105TM
105 gr
BG 24105VM
105 gr
BG 24115VM
115 gr
BG 2572M
72 gr
BG 2578M
78 gr
BG 2587M
87 gr
BG 2595M
95 gr
BG 25110M
110 gr
6.5mm .264” diameter
BG 26140VM
140 gr
BG 28180VM
180 gr
BG 30110M
110 gr
BG 30125M
125 gr
BG 30135M
135 gr
BG 30150M
150 gr
BG 30155TM
155 gr
BG 30155VM
155 gr
BG 30168TM
168 gr
BG 30168VM
168 gr
BG 30175VM
175 gr
BG 30185VM
185 gr
BG 30190VM
190 gr
BG 30210VM
210 gr
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
VLD
LTB
LTB
VLD
VLD
FB
FB
FB
FB
BT
LD
FB
LD
FB
FB
FB
FB
LD
BT
VLD
LTB
VLD
VLD
FB
FB
FB
FB
FB
BERGER VARMINT BULLETS
NON - COATED
MEF
BG 1720E *
20 gr
BG 1725E *
25 gr
BG 1730E *
30 gr
BG 2240E
40 gr
BG 2245E
45 gr
BG 2252E
52 gr
BG 2255E
55 gr
BG 2260E
60 gr
BG 2460E
60 gr
BG 2465E
65 gr
BG 2468E
68 gr
BG 2470E
70 gr
BG 2480E
80 gr
TIO
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
ABBREVIATIONS
BT
FB
LD
LTB
M
MEF
VLD
-
Boat Tail
Flat Base
Low Drag (15 Ogive)
Length Tolerant Bullet
Moly Coated
Maximum Expansion Factor
Very Low Drag
BERGER VARMINT BULLETS
MOLY - COATED
MEF
BG 1720EM *
20 gr
BG 1725EM *
25 gr
BG 1730EM *
30 gr
BG 2240EM
40 gr
BG 2252EM
52 gr
BG 2255EM
55 gr
BG 2260EM
60 gr
BG 2460EM
60 gr
BG 2465EM
65 gr
BG 2468EM
68 gr
BG 2470EM
70 gr
BG 2480EM
80 gr
VLD
VLD
FB
FB
FB
FB
LTB
VLD
LTB
VLD
VLD
VLD
VLD
VLD
Not all are inventory items,
Check Before Ordering
NG
RE
BG 1715
15 gr
BG 1720
20 gr
BG 1722
22 gr
BG 1725
25 gr
BG 1730
30 gr
BG 1737
37 gr
BG 2240
40 gr
BG 2245
45 gr
BG 2250
50 gr
BG 2252
52 gr
BG 2255
55 gr
BG 2260
60 gr
BG 2262
62 gr
BG 2264
64 gr
BG 2270V
70 gr
BG 2270T
70 gr
BG 2273T
73 gr
BG 2275V
75 gr
BG 2280V
80 gr
BG 2460
60 gr
BG 2462
62 gr
BG 2465
65 gr
BG 2465S
65 gr Short
BG 2465B
65 gr
BG 2466L
66 gr
BG 2468
68 gr
BG 2469L
69 gr
BG 2470
70 gr
BG 2471B
71 gr
BG 2474
74 gr
BG 2480
80 gr
BG 2488L
88 gr
BG 2490B
90 gr
BG 2495V
95 gr
BG 24105T
105 gr
BG 24105V
105 gr
BG 24115V
115 gr
BG 2572
72 gr
BG 2578
78 gr
BG 2587
87 gr
BG 2595
95 gr
BG 25110
110 gr
BG25115V
115 gr
6.5mm .264” diameter
BG 26140V
140 gr
BG 28180V
180 gr
BG 30110
110 gr
BG 30125
125 gr
BG 30135
135 gr
BG 30150
150 gr
BG 30155T
155 gr
BG 30155V
155 gr
BG 30168T
168 gr
BG 30168V
168 gr
BG 30175V
175 gr
BG 30185V
185 gr
BG 30190V
190 gr
BG 30210V
210 gr
BERGER MATCH BULLETS
MOLY COATED
Telephone Orderline +44-(0)1865 378200 • Fax Orderline +44-(0)1865 370123
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FMJBT-Full Metal Jacket Boat Tail
FMJ-Full Metal Jacket
SP-Spire Point
HP-Hollow Point
BTSP-Boat Tail Spire Point
RN-Round Nose
SJ-Short Jacket
BTHP-Boat Tail Hollow Point
Flat Point
40 gr Jet
45 gr Hornet
45 gr Bee
45 gr Hornet
50 gr SXSP
50 gr SP
55 gr SXSP
55 gr SP
55 gr SP w/c
55 gr FMJ-BT w/c
60 gr SP
60 gr HP
70 gr SP w/c
70 gr SP
70 gr SXSP
75 gr HP
80 gr FMJ
87 gr SP
87 gr BTHP
100 gr SP
100 gr BTSP
100 gr RN
60 gr FP
75 gr HP
87 gr SP
100 gr SP
117 gr RN
117 gr BTSP
120 gr HP
100 gr SP
129 gr SP
140 gr SP
160 gr RN
100 gr SP
110 gr HP
130 gr SP
140 gr BTSP
150 gr SP
150 gr RN
100 gr HP
120 gr SP
120 gr HP
139 gr SP
139 gr FP
139 gr BTSP
154 gr SP
154 gr RN
162 gr BTSP
175 gr SP
175 gr RN
100 gr SJ
110 gr SP
110 gr RN
110 gr FMJ
130 gr SP
150 gr SP
150 gr BTSP
150 gr RN (30-30)
150 gr FMJ-BT
165 gr SP
165 gr BTSP
170 gr FP (30-30)
180 gr SP
180 gr BTSP
180 gr RN
190 gr BTSP
220 gr RN
7.62 x 39 (.310”)
HRN 3140 . . . . . . . . . 123 gr SP
HRN 3147 . . . . . . . . . 123 gr FMJ
303 cal. & 7.7 Jap (.312”)
HRN 3120 . . . . . . . . . 150 gr SP
HRN 3130 . . . . . . . . . 174 gr RN
32 cal. (.321”)
HRN 3210 . . . . . . . . . 170 gr FP
8 mm (.323”)
HRN 3230 . . . . . . . . . 125 gr SP
HRN 3232 . . . . . . . . . 150 gr SP
HRN 3235 . . . . . . . . . 170 gr RN
HRN 3238 . . . . . . . . . 220 gr SP
338 cal. (.338”)
HRN 3310 . . . . . . . . . 200 gr SP
HRN 3315 . . . . . . . . . 200 gr FP
HRN 3320 . . . . . . . . . 225 gr SP
HRN 3330 . . . . . . . . . 250 gr RN
HRN 3335 . . . . . . . . . 250 gr SP
348 cal. (.348”)
HRN 3410 . . . . . . . . . 300 gr FP
35 cal. (.358”)
HRN 3505 . . . . . . . . . 180 gr SP
HRN 3510 . . . . . . . . . 200 gr SP
HRN 3515 . . . . . . . . . 200 gr RN
HRN 3520 . . . . . . . . . 250 gr SP
HRN 3525 . . . . . . . . . 250 gr RN
375 cal. (.375”)
HRN 3705 . . . . . . . . . 220 gr FP
HRN 3710 . . . . . . . . . 270 gr SP *
HRN 3715 . . . . . . . . . 270 gr RN *
HRN 3720 . . . . . . . . . 300 gr RN *
HRN 3725 . . . . . . . . . 300 gr BTSP *
HRN 37277 . . . . . . . . 300 gr FMJ-RN *
416 cal. (.416”)
HRN 4165 . . . . . . . . . 400 gr RN *
HRN 41677 . . . . . . . . 400 gr FMJ-RN *
44 cal. (.430”)
HRN 4300 . . . . . . . . . 265 gr FP
45 cal. (.458”)
HRN 4500 . . . . . . . . . 300 gr HP *
HRN 4502 . . . . . . . . . 350 gr RN *
HRN 4504 . . . . . . . . . 500 gr RN *
HRN 45077 . . . . . . . . 500 gr FMJ-RN *
* 50 Bullets per Box
MATCH BULLETS
22 Cal. (.224”)
HRN 2249 . . . . . . . . .
HRN 2250 . . . . . . . . .
HRN 2278 . . . . . . . . .
HRN 2279 . . . . . . . . .
HRN 22793 . . . . . . . .
52 gr BTHP
53 gr HP
68 gr BTHP
75 gr BTHP
75 gr BTHP Moly
30 Cal. (.308”)
HRN 30501 . . . . . . . . 168 gr BTHP
HRN 30503 . . . . . . . . 168 gr BTHP Moly
HRN 30711 . . . . . . . . 180 gr BTHP
A-MAX
The Hornady A-Max™
may be the most technological advanced bullet ever
designed. The aerodynamic
secant ogive profile, sharp
pointed tip and unmatched
dimensional concentricity
give it an extremely high
ballistic coefficient for near
perfection in flight.
V-MAX BULLETS
17 Cal. (.172”)
HRN 21710 . . . . . . . 20 gr V-MAX
22 Cal. (.224”)
HRN 22252 . . . . . . . .
HRN 22241 . . . . . . . .
HRN 22261 . . . . . . . .
HRN 22271 . . . . . . . .
HRN 22281 . . . . . . . .
35 gr V-MAX FB
40 gr V-MAX BT
50 gr V-MAX BT
55 gr V-MAX FB
60 gr V-MAX FB
6mm (.243”)
HRN 22411 . . . . . . . .
HRN 22415 . . . . . . . .
HRN 22420 . . . . . . . .
HRN 22440 . . . . . . . .
58 gr V-MAX
65 gr V-MAX
75 gr V-MAX
87 gr V-MAX
25 Cal. (.257”)
HRN 22520 . . . . . . . . 75 gr V-MAX
6.5mm (.264”)
HRN 22601 . . . . . . . . 95 gr V-MAX
270 Cal. (.277”)
HRN 22720 . . . . . . . . 110 gr V-MAX
7mm (.284”)
HRN 22810 . . . . . . . . 120 gr V-MAX
30 Cal. (.308”)
HRN 23010 . . . . . . . . 110 gr V-MAX
V-MAX
MOLY-COATED BULLETS
22 Cal. (.224”)
HRN 22413 . . . . . . . . 40 gr V-MAX
HRN 22613 . . . . . . . . 50 gr V-MAX
HRN 22713 . . . . . . . . 55 gr V-MAX
6mm (.243”)
HRN 24113 . . . . . . . . 58 gr V-MAX
HRN 24154 . . . . . . . . 65 gr V-MAX
HRN 24204 . . . . . . . . 75 gr V-MAX
A-MAX BULLETS
22 Cal. (.224”)
HRN 22492 . . . . . . . . 52 gr A-MAX
HRN 22792 . . . . . . . . 75 gr A-MAX
6mm (.243”)
HRN 24562 . . . . . . . . 105 gr A-MAX
6.5mm (.264”)
HRN 26332 . . . . . . . . 140 gr A-MAX
7mm (.284”)
HRN 28402 . . . . . . . . 168 gr A-MAX
SST- SUPER SHOCK TIPPED
BULLETS
270 Cal. (.277”)
HRN 27302 . . . . . . . . 130 gr SST
7mm (.284”)
HRN 28202 . . . . . . . . 139 gr SST
30 Cal. (.308”)
HRN 30302 . . . . . . . . 150 gr SST
HRN30452 . . . . . . . . 165 gr SST
HRN30702 . . . . . . . . 180 gr SST
30 Cal. (.308)
HRN 30312 . . . . . . . . 155 gr A-MAX
HRN 30502 . . . . . . . . 168 gr A-MAX
HRN 30712 . . . . . . . . 175 gr A-MAX
SO
Visit us on-line at: www.reloadingsolutions.com • email: [email protected]
A
LO DI
5
LU
NG
RE
FMJ-RN-Full Metal Jkt Round Nose
25 gr HP
25 gr HP Moly
S
SXSP-Super Explosive Spire Point
17 cal.. (.172”)
HRN 1710 . . . . . . . . .
HRN 17103 . . . . . . . .
22 cal.. (.222”)
HRN 2210 . . . . . . . . .
22 cal.. (.223”)
HRN 2220 . . . . . . . . .
22 cal. (.224”)
HRN 2229 . . . . . . . . .
HRN 2230 . . . . . . . . .
HRN 2240 . . . . . . . . .
HRN 2245 . . . . . . . . .
HRN 2260 . . . . . . . . .
HRN 2265 . . . . . . . . .
HRN 2266 . . . . . . . . .
HRN 2267 . . . . . . . . .
HRN 2270 . . . . . . . . .
HRN 2275 . . . . . . . . .
22 cal.. (.227”)
HRN 2280 . . . . . . . . .
6mm (.243”)
HRN 2410 . . . . . . . . .
HRN 2415 . . . . . . . . .
HRN 2420 . . . . . . . . .
HRN 2430 . . . . . . . . .
HRN 2440 . . . . . . . . .
HRN 2442 . . . . . . . . .
HRN 2450 . . . . . . . . .
HRN 2453 . . . . . . . . .
HRN 2455 . . . . . . . . .
25 cal. (.257”)
HRN 2510 . . . . . . . . .
HRN 2520 . . . . . . . . .
HRN 2530 . . . . . . . . .
HRN 2540 . . . . . . . . .
HRN 2550 . . . . . . . . .
HRN 2552 . . . . . . . . .
HRN 2560 . . . . . . . . .
6.5 mm (.264”)
HRN 2610 . . . . . . . . .
HRN 2620 . . . . . . . . .
HRN 2630 . . . . . . . . .
HRN 2640 . . . . . . . . .
270 cal. (.277”)
HRN 2710 . . . . . . . . .
HRN 2720 . . . . . . . . .
HRN 2730 . . . . . . . . .
HRN 2735 . . . . . . . . .
HRN 2740 . . . . . . . . .
HRN 2745 . . . . . . . . .
7 mm (.284”)
HRN 2800 . . . . . . . . .
HRN 2810 . . . . . . . . .
HRN 2815 . . . . . . . . .
HRN 2820 . . . . . . . . .
HRN 2822 . . . . . . . . .
HRN 2825 . . . . . . . . .
HRN 2830 . . . . . . . . .
HRN 2835 . . . . . . . . .
HRN 2845 . . . . . . . . .
HRN 2850 . . . . . . . . .
HRN 2855 . . . . . . . . .
30 cal. (.308”)
HRN 3005 . . . . . . . . .
HRN 3010 . . . . . . . . .
HRN 3015 . . . . . . . . .
HRN 3017 . . . . . . . . .
HRN 3020 . . . . . . . . .
HRN 3031 . . . . . . . . .
HRN 3033 . . . . . . . . .
HRN 3035 . . . . . . . . .
HRN 3037 . . . . . . . . .
HRN 3040 . . . . . . . . .
HRN 3045 . . . . . . . . .
HRN 3060 . . . . . . . . .
HRN 3070 . . . . . . . . .
HRN 3072 . . . . . . . . .
HRN 3075 . . . . . . . . .
HRN 3085 . . . . . . . . .
HRN 3090 . . . . . . . . .
V-MAX
Combination of lightweight
polymer tip, optimum bearing surface, flat base and
maximum stability. Designed
to hold together at extreme
rotational speeds and to
create maximum fragmentation. Varmint Hunting
applications.
HORNADY BULLETS
Combination of premiumpolymer tip and enhanced
design improves ballistic
coefficient for greater stability, higher down range accuracy and power. Incorporates
famous “Interlock” ring for no
jacket core separation. Hunting
applications.
INTERLOCK
Geometrically developed
profiles creates efficient bullet head while retaining large
bearing surface loading for
low drag, high stability and
flatter trajectory. The “interlock” ring prevents jacket
separation from the bullet’s
core. Hunting applications.
N
SST-SUPER SHOCK
TIPPED
TIO
Nosler
NOSLER BULLETS
®
VARMINT
BALLISTIC TIP BULLETS
A ultra thin jacket mouth assures
violent expansion at either end of the
velocity scale. A uniform, gradual
thickening of the jacket wall at the
bullet’s mid-section keeps the bullet
together until impact–at any velocity. Pure lead core is form-fitted to
the core cavity to eliminate possible
imbalance and erratic flight caused
by air pockets. Heavy jacket base prevents bullet deformation during flight.
Varmint hunting applications.
VARMINT BALLISTIC TIP BULLETS
22 CALIBRE - .224”
NSL 39510 . . . . . . . . . . . . . . 40 gr Spitzer
NSL 39522 . . . . . . . . . . . . . . 50 gr Spitzer
NSL 39526 . . . . . . . . . . . . . . 55 gr Spitzer
NSL 39555 . . . . . . . . . . . . . . 40 gr Spitzer (250)
NSL 39557 . . . . . . . . . . . . . . 50 gr Spitzer (250)
NSL 39560 . . . . . . . . . . . . . . 55 gr Spitzer (250)
6mm CALIBRE - .243”
NSL 24055 . . . . . . . . . . . . . . 55 gr Spitzer
NSL 39532 . . . . . . . . . . . . . . 70 gr Spitzer
NSL 24080 . . . . . . . . . . . . . . 80 gr Spitzer
NSL 39565 . . . . . . . . . . . . . . 55 gr Spitzer (250)
NSL 39570 . . . . . . . . . . . . . . 70 gr Spitzer (250)
.25 CALIBRE - .257”
NSL 43004 . . . . . . . . . . . . . . 85 gr Spitzer
HUNTING BALLISTIC TIP BULLETS
NSL 24090 . . . . . . . . . . . . . . 90 gr Spitzer
NSL 24095 . . . . . . . . . . . . . . 95 gr Spitzer
.25 CALIBRE - .257”
NSL 25100 . . . . . . . . . . . . . . 100 gr Spitzer
NSL 25115 . . . . . . . . . . . . . . 115 gr Spitzer
S
SO
6
LU
N
L
.30 CALIBRE - .308”
NSL 30125 . . . . . . . . . . . . . . 125 gr Spitzer
NSL 30150 . . . . . . . . . . . . . . 150 gr Spitzer
NSL 30165 . . . . . . . . . . . . . . 165 gr Spitzer
NSL 30180 . . . . . . . . . . . . . . 180 gr Spitzer
.338 CALIBRE - .338”
33180 . . . . . . . . . . . . . . 180 gr Spitzer
DI
O ANSL
NG
RE
6.5 mm CALIBRE - .264”
NSL 26100 . . . . . . . . . . . . . . 100 gr Spitzer
NSL 26120 . . . . . . . . . . . . . . 120 gr Spitzer
.270 CALIBRE - .277”
NSL 27130 . . . . . . . . . . . . . . 130 gr Spitzer
NSL 27140 . . . . . . . . . . . . . . 140 gr Spitzer
NSL 27150 . . . . . . . . . . . . . . 150 gr Spitzer
NSL 28120 . . . . . . . . . . . . . . 120 gr Spitzer
NSL 28140 . . . . . . . . . . . . . . 140 gr Spitzer
NSL 28150 . . . . . . . . . . . . . . 150 gr Spitzer
TIO
HUNTING
BALLISTIC TIP BULLETS
Features a polycarbonate tip which
resists deformation in the magazine and initiates expansion upon
impact. A fully tapered and lead
alloy core allow controlled expansion and optimum weight retention
at all practical velocity levels. A
heavy jacket base acts as a platform
for large diameter mushrooming.
Hunting applications.
PARTITION BULLETS
NSL 16314 . . . . . . . . . . . . 85 gr Spitzer
NSL 16315 . . . . . . . . . . . . 95 gr Spitzer
NSL 35642 . . . . . . . . . . . . 100 gr Spitzer
.25 CALIBRE - .257”
NSL 16317 . . . . . . . . . . . . 100 gr Spitzer
NSL 16318 . . . . . . . . . . . . 115 gr Spitzer
NSL 35643 . . . . . . . . . . . . 120 gr Spitzer
6.5 mm CALIBRE - .264”
NSL 16319 . . . . . . . . . . . . 100 gr Spitzer
NSL 16320 . . . . . . . . . . . . 125 gr Spitzer
NSL 16321 . . . . . . . . . . . . 140 gr Spitzer
.270 CALIBRE - .277”
NSL 16322 . . . . . . . . . . . . 130 gr Spitzer
NSL 16323 . . . . . . . . . . . . 150 gr Spitzer
NSL 16324 . . . . . . . . . . . . 160 gr Semi-Spitzer
NSL 16325 . . . . . . . . . . . . 140 gr Spitzer
NSL 16326 . . . . . . . . . . . . 150 gr Spitzer
NSL 16327 . . . . . . . . . . . . 160 gr Spitzer
NSL 35645 . . . . . . . . . . . . 175 gr Spitzer
.30 CALIBRE - .308”
NSL 16329 . . . . . . . . . . . . 150 gr Spitzer
NSL 16330 . . . . . . . . . . . . 165 gr Spitzer
NSL 16333 . . . . . . . . . . . . 170 gr RN (30-30)
NSL 16331 . . . . . . . . . . . . 180 gr Spitzer
NSL 25396 . . . . . . . . . . . . 180 gr Protected Point
NSL 35626 . . . . . . . . . . . . 200 gr Spitzer
NSL 16332 . . . . . . . . . . . . 220 gr Semi-Spitzer
NSL 35277 . . . . . . . . . . . . 200 gr Spitzer
.338 CALIBRE - .338”
NSL 16337 . . . . . . . . . . . . 210 gr Spitzer
NSL35487
SOLID BASE
.224 . . . 45 gr. Hornet (100/box)
PARTITION BULLETS
Fully tapered jacket ruptures instantly at the
thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion
and curls the jacket uniformly at high and
low velocities. Special lead alloy dual core
construction provides superior mushrooming characteristics at virtually all impact
velocities. Nosler’s integral partition supports
expanded mushrooming and retains the rear
core. Rear core retains greater than 50% of
original bullet weight. Special crimp locks
rear core section to resist deformation under
pressures of heavy Magnums.
NSL 16336 . . . . . . . . . . . . 225 gr Spitzer
NSL 35644 . . . . . . . . . . . . 250 gr Spitzer
.35 CALIBRE - 358”
NSL 44800 . . . . . . . . . . . . 225 gr Spitzer
NSL 44801 . . . . . . . . . . . . 250 gr Spitzer
9.3mm CALIBRE - .366”
NSL 44750 . . . . . . . . . . . . 286 gr Spitzer
.375 CALIBRE - .375"
NSL 44850 . . . . . . . . . . . . 260 gr Spitzer
NSL 44845 . . . . . . . . . . . . 300 gr Spitzer
.416 CALIBRE - .416”
NSL 45200 . . . . . . . . . . . . 400 gr Spitzer
.45-70 CALIBRE - .458”
NSL 45325 . . . . . . . . . . . . 300 gr Protectd Pnt
NSL28121
SOLID BASE
.284 . . . . 120 gr FP (50/box)
FAIL SAFE
CALIBRE
CALIBRE
22
DIA.
.224”
WEIGHT
40 gr.
SECT.
DENS.
.114
.221
.224”
.224”
50 gr.
55 gr.
.142
.157
.238
.267
6mm
.243”
55 gr
.133
.276
6mm
.243”
95 gr
.230
.379
25
.257”
85 gr
.183
.331
25
.257”
115 gr .249
.453
7mm
.277”
.284”
130 gr .242
140 gr .248
30
30
.284”
.308”
.308”
150 gr .266
150 gr .226
168 gr .253
BAL.
COEF.
270
.277”
140 gr .261
.322
7mm
.284”
140 gr .248
.323
7mm
.284”
160 gr .283
.382
30
.308”
150 gr .226
.308
30
.308”
165 gr .248
.314
30
.308”
180 gr .271
.391
338
.338”
230 gr .288
.436
375
.375”
270 gr .274
.393
375
.375”
300 gr .305
.441
.433
.507
338
.338”
200 gr .250
.414
.338 CALIBRE - .338”
NSL 51200 . . . . . . . . . . . 200 gr Spitzer
FAIL SAFE
.30 CALIBRE - .308”
NSL 53170 . . . . . . . . . . . 150 gr HP
NSL 53175 . . . . . . . . . . . 165 gr HP
NSL 53180 . . . . . . . . . . . 180 gr HP
338 CALIBRE - .338”
NSL 53230 . . . . . . . . . . . 230 gr HP
DIA.
WEIGHT
SECT.
DENS.
BAL.
COEF.
375 CALIBRE - .375”
NSL 53350 . . . . . . . . . . . 270 gr HP
NSL 53360 . . . . . . . . . . . 300 gr HP
PARTITION GOLD
270
.277”
150 gr .279
.465
7mm
.284”
160 gr .283
.475
270 CALIBRE - .277”
NSL 52100 . . . . . . . . . . . 150 gr Spitzer
NSL 52150 . . . . . . . . . . . 160 gr Spitzer
30
.308”
150 gr .226
.387
30
.308”
180 gr .271
.474
.30 CALIBRE - .308”
NSL 52200 . . . . . . . . . . . 150 gr Spitzer
NSL 52230 . . . . . . . . . . . 180 gr Spitzer
338
.338”
250 gr .313
.473
.338 CALIBRE - .338”
NSL 52280 . . . . . . . . . . . 250 gr Spitzer
SO
A
LO DI
7
LU
NG
RE
180 gr .271
.30 CALIBRE - .308"
NSL 51150 . . . . . . . . . . . 150 gr Spitzer
NSL 51160 . . . . . . . . . . . 168 gr Spitzer
NSL 51170 . . . . . . . . . . . 180 gr Spitzer
NSL 53150 . . . . . . . . . . . 140 gr HP
NSL 53160 . . . . . . . . . . . 160 gr HP
.490
.308”
7mm CALIBRE - .284"
NSL 51105 . . . . . . . . . . . 140 gr Spitzer
NSL 51110 . . . . . . . . . . . 150 gr Spitzer
CT Partition Gold offers the perfect blend
of expansion and penetration on medium
and large game at a wide range of impact
velocities. The front half of this unique
projectile is a drag-resistant, long-ogive
soft point that flattens trajectories and
expands uniformly while retaining weight,
even velocity had dropped off at long
range. The rear core is constructed of a
hard lead alloy, locked in place with a
heel crimp to prevent core slippage and
reinforced with Winchester’s patented
steel cup to prevent core distortion at high
impact velocities. This construction maintains the rear core integrity after impact,
maximising penetration.
.493
30
.270 CALIBRE - .277"
NSL 51075 . . . . . . . . . . . 130 gr Spitzer
270 CALIBRE - .277”
NSL 53140 . . . . . . . . . . . 140 gr HP
.485
.435
.25 CALIBRE - .257"
NSL 51045 . . . . . . . . . . . 85 gr Spitzer
NSL 51050 . . . . . . . . . . . 115 gr Spitzer
PARTITION GOLD
CALIBRE
7mm
SECT.
DENS.
6mm CALIBRE - .243"
NSL 51040 . . . . . . . . . . . 95 gr Spitzer
BAL.
COEF.
22
22
270
WEIGHT
HUNTING BALLISTIC SILVERTIP
S
The CT Ballistic Silvertip is a state of
the art, aerodynamically optimized series
of hunting and varmint bullets designed
to put unparalleled accuracy, flight performance, and long range stability in
the hands of the handloader. Ballistic
Silvertip Hunting bullets are designed to
provide stellar performance on small and
medium sized game like antelope, deer
and sheep while Ballistic Silvertip Varmint
bullets are designed to vanquish varmints
like magic. Ballistic Silvertip’s unique
features make it the flattest shooting, most
accurate hunting bullet available.
DIA.
NSL 51030
55 gr Spitzer
N
BALLISTIC SILVERTIP
.22 CALIBRE - .224”
NSL 51005
40 gr Spitzer
NSL 51010
50 gr Spitzer
NSL 51031
55 gr Spitzer
CT Fail Safe bullets are unique dual
chamber designs that provide deep penetration on virtually any big game animal.
The front of the bullet is a metallurgical
breakthrough–the uniquely designed
hollow point expands perfectly and
retains the bulk of its mass while resisting fragmentation. The rear core, on the
other hand, is hardened lead enclosed
in a combination of copper alloy jacket
and Winchester’s patented steel cup. The
added strength of steel prevents bullet
deformation and promotes exceptional
penetration in heavy muscle or bone.
C-TECH BULLETS
Supreme®Hunting Bullets
VARMINT BALLISTIC SILVERTIP
TIO
SPEER BULLETS
22
Spitzer
Soft
Point
.224”
45 gr.
SP 1023
218 BEE
Flat
Soft
Point
.224”
46 gr.
SP 1024
22
Spitzer
Soft
Point
.224”
50 gr.
SP 1029
22
“TNT”
Hollow
Point
.224”
50 gr.
SP 1030
22
MHP
Hollow
Point
.224”
50 gr.
SP 1031
Hollow
Point
.224”
52 gr.
SP 1035
22
Hollow
Point BT
Match
.224”
52 gr.
SP 1036
22
FMJ
BT
W/Cann
.224”
55 gr.
SP 1044
22
Spitzer
Soft
Point
.224”
55 gr.
SP 1047
22
Spitzer
Soft Point
W/Cann
.224”
55 gr.
SP 1049
22
FMJ
BT
W/Cann
.224”
62 gr.
SP 1050
22
Semi
Spitzer
Soft Point
.224”
70 gr.
SP 1053
6mm
“TNT”
Hollow
Point
.243”
70 gr.
SP 1206
6mm
MHP
Hollow
Point
.243”
70 gr.
SP1207
Hollow
Point
.243”
75 gr.
SP1205
6mm
Spitzer
Soft
Point
.243”
80 gr.
SP 1211
6mm
Spitzer
Soft
Point BT
.243”
85 gr.
SP 1213
6mm
Spitzer
Soft
Point
.243”
90 gr.
SP 1217
6mm
Spitzer
Soft
Point BT
.243”
100 gr.
SP 1220
6mm
Spitzer
Soft
Point
.243”
105 gr.
SP 1229
25-20 Win
Flat Soft
Point
W/Cann
.257”
75 gr.
SP 1237
25
Spitzer
Soft
Point
.257”
87 gr.
SP 1241
25
“TNT”
Hollow
Point
.257”
87 gr.
SP 1246
25
MHP
Hollow
Point
.257”
87 gr.
SP 1247
25
Spitzer
Soft
Point
.257”
100 gr.
SP 1405
25
Hollow
Point
.257”
100 gr.
SP 1407
25
Spitzer
Soft
Point BT
.257”
100 gr.
SP 1408
25
Spitzer
Soft
Point BT
.257”
120 gr.
SP 1410
25
Spitzer
Soft
Point
.257”
120 gr.
SP 1411
6.5mm
“TNT”
Hollow
Point
.264”
90 gr.
SP 1445
6.5mm
Spitzer
Soft
Point
.264”
120 gr.
SP 1435
6.5mm
Spitzer
Soft
Point
.264”
140 gr.
SP 1441
270
“TNT”
Hollow
Point
.277”
90 gr.
SP 1446
270
MHP
Hollow
Point
.277”
90 gr.
SP 1457
270
270
Spitzer
Soft
Point
.277”
130 gr.
SP 1459
270
Spitzer
Soft
Point BT
.277”
150 gr.
SP 1604
270
Spitzer
Soft
Point
.277”
150 gr.
SP 1605
7mm
MHP
Hollow
Point
.284”
110 gr.
SP 1615
7mm
“TNT”
Hollow
Point
.284”
110 gr.
SP 1616
7mm
Hollow
Point
.277”
100 gr.
SP 1447
270
Spitzer
Soft
Point BT
.277”
130 gr.
SP 1458
Hollow
Point
.284”
115 gr.
SP 1617
7mm
Spitzer
Soft
Point
.284”
120 gr.
SP 1620
7mm
Spitzer
Soft
Point
.284”
130 gr.
SP 1623
7mm
Spitzer
Soft
Point BT
.284”
130 gr.
SP 1624
7mm
Spitzer
Soft
Point BT
.284”
145 gr.
SP 1628
7mm
Spitzer
Soft
Point
.284”
145 gr.
SP 1629
7mm
Match
Hollow
Point BT
.284”
145 gr.
SP 1631
7mm
Spitzer
Soft
Point BT
.284”
160 gr.
SP 1634
7mm
Spitzer
Soft
Point
.284”
160 gr.
SP 1635
7mm
Mag Tip
Soft
Point
.284”
160 gr.
SP 1637
7mm
30
30
Mag Tip Round Soft
Soft
Pnt
Hollow
Point
Plinker
Point
.284”
.308”
.308”
175 gr.
100 gr.
110 gr.
SP 1641
SP 1805
SP 1835
30
Round
Soft
Point
.308”
110 gr.
SP 1845
30
Carbine
Round
FMJ
.308”
110 gr.
SP 1846
30
Spire
Soft
Point
.308”
110 gr.
SP 1855
30
“TNT”
Hollow
Point
.308”
125 gr.
SP 1986
Hollow
Point
.308”
130 gr.
SP 2005
30
Flat
Soft
Point
.308”
130 gr.
SP 2007
30
Flat
Soft
Point
.308”
150 gr.
SP 2011
30
Round
Soft
Point
.308”
150 gr.
SP 2017
30
FMJ
BT
W/Cann
.308”
150 gr.
SP 2018
30
Spitzer
Soft
Point BT
.308”
150 gr.
SP 2022
30
Spitzer
Soft
Point
.308”
150 gr.
SP 2023
30
Mag-Tip
Soft
Point
.308”
150 gr.
SP 2025
30
Spitzer
Soft
Point BT
.308”
165 gr.
SP 2034
30
Spitzer
Soft
Point
.308”
165 gr.
SP 2035
30
MHP
Hollow
Point
.308”
168 gr.
SP 2039
30
Round
Soft
Point
.308”
180 gr.
SP 2047
30
Spitzer
Soft
Point BT
.308”
180 gr.
SP 2052
30
Spitzer
Soft
Point
.308”
180 gr.
SP 2053
30
Mag-Tip
Soft
Point
.308”
180 gr.
SP 2059
30
Spitzer
Soft
Point
.308”
200 gr.
SP 2211
303
Spitzer
Soft Point
W/Cann
.311”
125 gr.
SP 2213
303
Spitzer
Soft
Point
.311”
150 gr.
SP 2217
303
Round
Soft
Point
.311”
180 gr.
SP 2223
32
Flat
Soft
Point
.321”
170 gr.
SP 2259
8mm
Spitzer
Soft
Point
.323”
150 gr.
SP 2277
30
Match
Hollow
Point BT
.308”
168 gr.
SP 2040
30
Flat
Soft
Point
.308”
170 gr.
SP 2041
22
30
A
LO DI
S
N
SO
8
LU
TIO
6mm
HOT-COR™
NG
RE
22
Spitzer
Soft
Point
.224”
40 gr.
SP 1017
SPEER BULLETS
338
Spitzer
Soft
Point
.338”
200 gr.
SP 2405
338
Spitzer
Soft
Point BT
.338”
225 gr.
SP 2406
35
Flat
Soft
Point
358”
180 gr.
SP 2435
35
Flat
Soft
Point
.358”
220 gr.
SP 2439
35
Spitzer
Soft
Point
.358”
250 gr.
SP 2453
9.3mm
375
SemiSemiSpitzer
Spitzer
Soft Point Soft Point
.366”
.375”
270 gr.
235 gr.
SP 2459
SP 2471
375
Spitzer
Soft
Point BT
.375”
270 gr.
SP 2472
416
Mag
Tip
.416”
350 gr.
SP 2477
45
Flat
Soft
Point
.458”
350 gr.
SP 2478
45
Flat
Soft
Point
.458”
400 gr.
SP 2479
Grand Slam® Premium Big Game
Bullets
Protected Point Design
"Cheap gear won't cut it in my camp!" is
what many professional outfitters say, and
we can't argue with that. Because we think
"gear" includes the bullets you load for your
dream hunt, Speer builds Grand Slam®
premium hunting bullets for the demanding
reloader.
When the game you seek is at the upper end
of your rifle's capability, bullet construction becomes more critical than ever. We
start with a precision-drawn gilding metal
jacket that's up to 45 percent thicker than
our regular Hot-Cor bullets. Up front, the
jacket tapers to a thin, fluted edge to allow
symmetrical expansion over a wide range of
velocities. That means Grand Slam works as
well in the 300 Savage as it does in the 300
Weatherby.
Each Grand Slam bullet then gets two
cores*. The rear core is a tough, five-percent
antimony-lead alloy that's staked in place
with a lock ring of jacket material. Then we
use the Hot-Cor® process to pour in a nose
core of softer alloy. The molten metal grips
the rear core and the jacket for excellent
retained weight, commonly over 80 percent
on game animals. Final forming produces
a long nose for flat shooting, and the long
jacket protects the tip against recoil damage
in the magazine.
Jacket opening is thin and
fluted to aid expansion
8 radius ogive nose for flat
shooting
Softer Hot-Cor® nose core
Rear core is secured by a
lock ring
Hard 5% antimony-lead
rear core
Thick jacket in shank
section
25
GS
Soft
Point
.257”
120 gr.
SP 1415
6.5mm
GS
Soft
Point
.264”
140 gr.
SP 1444
270
GS
Soft
Point
.277”
130 gr.
SP 1465
270
GS
Soft
Point
.277”
150 gr.
SP 1608
7mm
GS
Soft
Point
.284”
145 gr.
SP 1632
7mm
GS
Soft
Point
.284”
160 gr.
SP 1638
7mm
GS
Soft
Point
.284”
175 gr.
SP 1643
30
GS
Soft
Point
.308”
150 gr.
SP 2026
*Grand Slams under 270 caliber have a single Hot-Cor
because the ratio of jacket thickness to core cavity eliminates the need for the rear core.
30
GS
Soft
Point
.308”
165 gr.
SP 2038
30
GS
Soft
Point
.308”
180 gr.
SP 2063
30
GS
Soft
Point
.308”
200 gr.
SP 2212
338
GS
Soft
Point
.338”
250 gr.
SP 2408
35
GS
Soft
Point
.358”
250 gr.
SP 2455
375
GS
Soft
Point
.375”
285 gr.
SP 2473
SO
A
LO DI
9
LU
NG
RE
6mm
GS
Soft
Point
.243”
100 gr.
SP 1222
Grand Slam has evolved over the last quarter century into a highly respected game
bullet, both in North America and on the
plains of Africa. Sure, Grand Slam costs
more, but more goes into making each bullet. Compared to the cost of your dream
hunt, we think you'll find Grand Slam to be
money well spent.
Grand Slams for North American game are
available in calibers from 243 (6mm) to 375.
S
8mm
Spitzer
Soft
Point
.323”
200 gr.
SP 2285
N
8mm
SemiSpitzer
Soft Point
.323”
170 gr.
SP 2283
TIO
BULLETS
BULLETS
Availability & Prices on Request
CL
Core-Lokt™
6mm Cal./.243
LPU6047 . . . . . . . . . . . . 90 gr. HPBT Scenar
6.5mm Cal/.264
30 Cal/.308
LPU7073 . . . . . . . . . . . .
LPU7069 . . . . . . . . . . . .
LPU7071 . . . . . . . . . . . .
LPU8017 . . . . . . . . . . . .
155 gr. HPBT Scenar
168 gr. HPBT Scenar
185 gr. HPBT Scenar
250 gr. HPBT Scenar
WOODLEIGH BULLETS
Availability and Prices on Request
22 Cal./.224
RB22HP50 . . . . . . . . . .
RB22PSP50 . . . . . . . . .
RB22PSP55 . . . . . . . . .
RB22MC55 . . . . . . . . . .
RB22HP55 . . . . . . . . . .
50 gr PLHP
50 gr PSP
55 gr PSP
55 gr FMJ
55 gr PLHP
24 Cal./.243
RB24PSP100 . . . . . . . . 100 gr PSPCL
25 Cal./.257
RB25PSP120 . . . . . . . . 120 gr PSPCL
6.5mm/.264
RB65PSP120 . . . . . . . . 120 gr PSPCL
RB65PSP140 . . . . . . . . 140 gr PSPCL
The Barnes “X” bullet features solid copper
construction throughout for maximum integrity
and weight retention. An air cavity in the frontal section provides superior expansion. Unique
solid construction eliminates concentricity
problems
270 Cal./.277
RB27PSP130 . . . . . . . . 130 gr PSPCL
7mm/.284
RB7SP150 . . . . . . . . . . . 150 gr SPCL
308 Cal.
180 gr. PP
Australian
Made
“308 Cal 180 gr recovered from
game. 94% retained weight
Premium Hunting Bullets with a proven
reputation worldwide for reliability under
all conditions.
30 Cal./.308
RB30PSP125
RB30PSP150
RB30PSP165
RB30PSP180
........
........
........
........
125 gr PSP
150 gr PSPCL
165 gr PSPCL
180 gr PSPCL
45-70/.457
RB4570HP300 . . . . . . . 300 gr JHP
RB4570SP405 . . . . . . . . 405 gr JHP
TROPHY BONDED BULLETS
XLC™ Bullets represent another advance in
bullet technology. The “XLC™” coating reduces friction in the bore, reduces fouling by upto
40% and reduces rate of heat build up in the
barrel by upto 50%. Coating is durable and will
not rub off in the box or your pocket.
The Weight Retention of a bullet defines its
integrity and quality, and the weight retention of Solid Shank® Bear Claw® bullets is
second to none. Their 100% molecular-fused
lead core and low fouling copper alloy jacket,
combined with the multiple calibre expansion, provides optimum balance of both
energy transfer and lethal penetration ! The instant expansion and
unmatched weight retention of the Solid Shank® Bear Claw® bullets
make for devastating knockdown power !
Manufactured in the following calibres:
.22, .25, 6.5mm, .270, 7mm, .308, .338, .35, .375, .416, .458 and .470.
A
LO DI
S
N
SO
10
LU
NG
RE
“Bullets for the Serious Hunter !”
TIO
The Barnes solid is a homogeneous metal bullet which has no lead core and no jacket with
phenomenal penetration. Small calibres are
suited for fur bearing animals and African
small game. The large calibre round nose solids
offer unequalled knock down ability and penetration.
BULLETS
SWIFT BULLETS
THE PROMISE OF
PROVEN PERFORMANCE
The Ultimate in Accuracy And Terminal
Performance
It’s fact that bullets that perform well on game
aren’t very accurate. And bullets that make tight
groups on paper usually aren’t known for toughness. But that’s all changed now, because the people
who brought you the world’s toughest hunting
bullet — the Swift A-Frame™ — have engineered
the new Scirocco boat tail spitzer to slice through
the wind with a level of accuracy to satisfy even the
most demanding hunters. This is the bullet you’ve
been waiting for.
S
11
LU
N
SO
A
LO DI
NG
RE
Swift Scirocco™ Bonded
TIO
SIERRA BULLETS
6mm Calibre Cont. (.243/6.17 mm Diameter)
.22 Calibre Hornet (.223/5.66 mm Diameter)
40 gr. Hornet Varminter
SRA 1100
SRA 1110
.22 Calibre Hornet (.224/5.69 mm Diameter)
SRA 1200
SRA 1210
.22 Calibre (.224/5.69 mm Diameter)
40 gr. HP Varminter
SRA 1385
40 gr. Blitzking
SRA 1440
85 gr. HPBT GameKing
SRA 1530
90gr.FMJBT GameKing
SRA 1535
100 gr. SPT Pro-Hunter
SRA 1540
90 gr. HP Varminter
SRA 1800
SRA 1810
130 gr. SBT GameKing
SRA 1820
SRA 1830
135 gr. HPBT MatchKing
SRA 1833
45 gr. SPT Varminter
SRA 1310
SRA 1560
SRA 1845
50 gr. SMP Varminter
SRA 1320
SRA 1570
SRA 1840
50 gr. Blitz
SRA 1340
75 gr. HP Varminter
SRA 1600
50 gr. BlitzKing
SRA 1450
SRA 1610
SRA 1410
SRA 1615
53 gr. HP MatchKing
SRA 1400
SRA 1620
55gr.FMJBT GameKing
SRA 1355
SRA 1360
55 gr. SBT GameKing
SRA 1365
SRA 1390
55 gr. BlitzKing
SRA 1455
60 gr. HP Varminter
SRA 1375
63 gr. SMP
SRA 1370
SRA 1380 7”-10”TWST
SRA 9377
7”-8”TWST
SRA 9390
7”-8”TWST
6mm/.243 Calibre (.243/6.17 mm Diameter)
55 gr. BlitzKing
SRA 1502
60 gr. HP Varminter
SRA 1500
SRA 1505
SRA 1625
SRA 1628
SRA 1630
SRA 1640
SRA 1650
6.5mm Calibre (.264/6.71 mm Diameter)
85 gr. HP Varminter
SRA 1700
100 gr. HP Varminter
SRA 1710
SRA 1715
SRA 1720
SRA 1725
SRA 1730
SRA 1740
SRA 1742
SRA 9570
150 gr. RN Pro-Hunter
SRA 1850
7mm Calibre (.284/7.21 mm Diameter)
SRA 1895
SRA 1900
SRA 1903
SRA 1905
SRA 1910
SRA 1913
SRA 1915
SRA 1920
SRA 1925
SRA 1930
SRA 1950
SRA 1940
.30 Calibre (.30-.30) (.308/7.82 mm Diameter)
125 gr. HPFN P-Hunter
SRA 2020
150 gr. FN Pro-Hunter
SRA 2000
SRA 2010
N
SO
S
NG
RE
SRA 1520
SRA 1835
SRA 1350
12
80 gr. Blitz Varminter
SRA 1515
160 gr. SMP Pro-Hunter
SRA 1750
100 gr. SMP Pro-Hunter
SRA 1550
55 gr. Blitz Varminter
SRA 1345
LU
75 gr. HP Varminter
SRA 1510
6.5mm Calibre Cont. (.264/6.71 mm Diameter)
SRA 1300
SRA 1330
A
LO DI
70 gr. BlitzKing
SRA 1507
TIO
Sierra Software
SRA 9245
1 in 9” TWST
.30 Calibre 7.62 mm (.308/7.82 mm Diameter)
SRA 2100
SRA 2305
110 gr. FMJ Pro-Hunter
SRA 2105
SRA 2300
SRA 2110
174gr. HPBT MatchKing
SRA 2315
SRA 2120
150 gr. FMJBT GameKing
SRA 2115
SRA 2310
8mm Calibre (.323/8.20 mm Diameter)
SRA 2400
SRA 2125
SRA 2610
SRA 2600
SRA 2140
SRA 9300
SRA 2800
SRA 2200
SRA 2850
SRA 2275
SRA 2900
SRA 2160
SRA 2950
SRA 2220
SRA 3000
SRA 2170
SRA 2210
Sierra 4th Edition Reloading
Manuals on CD ROM
SRA 2155
SRA 2150
SRA0019
SRA 2420
SRA 2190
165 gr. SBT Gameking
SRA 2145
All the articles , photographs, charts and tables
from the renowned Sierra Reloading Manuals are
now available on your PC. Also includes audio
and video clips and direct internet access (local
service required). System requirements include
486 (DX) or higher processor, 8 Mb of RAM, a
CR ROM Drive, 640x480 VGA 256 colour display, speakers and a mouse, Microsoft Windows
95 or higher. Burris Varminter shooting game also
included.
SRA 2410
SRA 2130
SRA 2135
SIERRA BULLETS
Sierra’s 4th Edition
Reloading Manuals
on CD ROM
.30 Calibre Cont. (.308/7.82 mm Diameter)
Sierra INFINITY
Exterior Ballistic
Computer Software
This exciting new software gives you multiple trajectory charts, graphics and Point Blank Range, it
allows for you to Calculate Zero, Uphill/Downhill
shooting, Maximum Range and more. Bullet
library includes all major bullet companies as
well as ammunition manufacturers and allows for
addition of new and custom bullets. This program
is available in CD-Rom format for Windows only.
System Requirements: PC compatible with 486
processor or higher, Win 95, Win 98 or WinNT
4.0 with SP3, 8 Mb RAM (16 Mb recommended),
CD ROM drive (must support long filenames),
pointing device, sound card, speakers, VGA
colour video and 5 Mb hard drive space.higher
SRA0300
Sierra INFINITY Exterior Ballistic
Software on CD ROM
Sierra INFINITY is also available coupled with
Sierra’s 4th Edition Rifle & Handgun Manuals on
CD ROM.
.45 Calibre (.45-70) (.458/11.63 mm Diameter)
300
gr.
HP/FN
Pro-
Hunter
SRA 2165
SRA 8900
website: www.sierrabullets.com
SRA 2230
SRA 2240
Sierra INFINITY with Sierra’s 4th
Edition Rifle & Handgun Manuals
on CD ROM
S
13
LU
N
SO
A
LO DI
NG
email: [email protected]
RE
SRA0301
SRA 2180
TIO
PROTEKTOR
The Protektor Model range of bags are the most popular sand bags sold to
serious benchrest shooters. Each bag is carefully stitched and made of select
high grade leather. For a bag to suit your specific requirements, use the infor
mation on these pages to help you select the correct one.
The Original Leather Sandbag
PROTEKTOR MODEL REST TOP BAGS
Owl Ear Front Bags These bags are designed for use on mechanical rests.
The owl ear front bags come in three sizes. Choose the size that will most
closely fit your particular rifle forend contour. See ear to ear dimensions in
brackets. Overall dimensions of the bag are: 2-⁄” wide by 5-⁄” long and
1” high in centre. PMBAG25, PMBAG26 & PMBAG27 are the same as the
standard front bags only the top, ears and sides are of fine cordura. The bottom is leather for stability and there is no rib on top. PMBAG28 is made of
cordura with a rib on top.
PMBAG01
PMBAG02
PMBAG03
PMBAG25
PMBAG26
PMBAG27
PMBAG28
. . . . . . . Small Owl Ear Front Bag (1-⁄” to 1-⁄”)
. . . . . . . Regular Owl Ear Front Bag (2” to 2-⁄”)
. . . . . . . Wide Owl Ear Front Bag (2-⁄” to 3”)
. . . . . . . Small Owl Ear Cordura Front Bag (1-⁄” to 1-⁄”)
. . . . . . . Regular Owl Ear Cordura Front Bag (2” to 2-⁄”)
. . . . . . . Wide Owl Ear Cordura Front Bag (2-⁄” to 3”)
. . . . . . . Wide Owl Ear Cordura Front Bag w/rib (2-⁄” to 3”)
Owl Ear Front Bags
(PMBAG02, PMBAG01, PMBAG03)
PROTEKTOR MODEL REAR BAGS
Standard Rear Bag This rear bag is used mainly to take care of high butt
stocks on a large number of magnum rifles and similar rifles. Bag size - 5”
wide by 6-3/4” long and 2-5/8” high at the front, end then tapers to the rear
to match the shape of the rifle stock.
PMBAG12 . . . . . . . Standard Rear Bag
Rabbit Ear Bag
This bag can be used with any front bag listed. Its base
size is the same as the standard bag PMBAG12, only this bag has two compartmented ear bags sewn to its top. each ear measures 2-⁄” high and is
filled separately. PMBAG13A is similar to PMBAG13 except it has a heavy
bottom and is 1” taller. PMBAG13B has a double bottom and is 2” taller.
Rabbit Ear Rear Bags
(PMBAG13, PMBAG13A, PMBAG13B)
PMBAG29 is similar to the standard version of this bag except it has cordura
ears on top.
PMBAG13 . . . . . . . Rabbit Ear Rear Bag
PMBAG13A . . . . . . Heavy Bottom Rabbit Ear Rear Bag
PMBAG13B . . . . . . Custom Rabbit Ear Rear Bag
PMBAG29 . . . . . . . Rabbit Ear Rear Bag with Cordura Ears
Bunny Ear Bag
Same as the Rabbit Ear bag except the ears are only
half as high. Bunny ears are the choice of an increasing number of bench
shooters. It accommodates thicker butt stocks and will not interfere with
cheek pieces. PMBAG14A is similar to PMBAG14 except it has a heavy bottom and is 1” taller. PMBAG14B has a double bottom and is 2” taller.
PMBAG30 is similar to the standard version of this bag except it has cordura
ears on top.
Bunny Ear Rear Bags
(PMBAG14, PMBAG14A, PMBAG14B)
PMBAG14 . . . . . . . Bunny Ear Rear Bag
PMBAG14A . . . . . . Heavy Bottom Bunny Ear Rear Bag
PMBAG14B . . . . . . Custom Bunny Ear Rear Bag
PMBAG30 . . . . . . . Bunny Ear Rear Bag with Cordura Ears
PMBAG31 . . . . . . . Custom Rabbit Ear Rear Bag, Heavy Material
PMBAG32 . . . . . . . Bunny Ear Rear Bag with Heavy Material sides
MISCELLANEOUS PROTEKTOR MODEL BAGS
Small Pillow Bag — Square pillow shaped bag that can be used for more
than one application. Large surface area allows uses such as resting your
elbow, rifle butt, recoil bag etc.
Bag size is approximately 6” x 6”.
Small Pillow Bag, PMBAG18
A
LO DI
S
N
SO
14
LU
NG
RE
PMBAG18 . . . . . . . Small Pillow Bag
TIO
PROTEKTOR
PROTEKTOR MISCELLANEOUS BAGS
Standard Front Bag This front bag is normally used when a mechanical
front rest is not being used. This bag has a height of 4” from the bottom to
the top of the saddle.
PMBAG07 . . . . . . . Standard Front Bag
PMBAG7A . . . . . . . Standard Front Bag, (heavy bottom)
Sausage Front Bag — For use on a mechanical rest. Will accommodate
most rifles by just letting out the proper amount of sand to make a hollow
centre.
PMBAG08 . . . . . . . Sausage Front Bag
Large Owl Ear Front Bag — This bag is, front to rear, nearly twice as long
as it’s smaller counterpart PMBAG03 and narrower (bag size 4-⁄”L x 5⁄” W) to accommodate large forestocks.
PMBAG09 . . . . . . . Large Owl Ear Front Bag
Standard Front Bag, Sausage Front Bag and Large Owl Ear Front Bag
PMBAG07, PMBAG08, PMBAG09
Sissy Bag — If you want to shoot a 416 Rigby off the bench, then this bag
certainly absorbs plenty of recoil when placed at the back of any rear sandbag. Its 4” in diameter by 8-⁄” high and has a carrying strap attached to
the top.
PMBAG15 . . . . . . . Sissy Bag
Brick Bag — This bag looks just like a brick. Bag size is 4” wide by 8” long
by 1-⁄” high. This bag can be used as an all purpose bag or used to rest
your elbow or arm on.
PMBAG16 . . . . . . . Brick Bag
Small Brick Bag — Same as the Brick bag above except only smaller. Bag
dimensions are 4” wide by 5” long by 1-⁄” high.
PMBAG17 . . . . . . . Small Brick Bag
Sissy Bag, Brick Bag, Small Brick Bag
Large Sausage Bag — This bag is, front to rear, nearly twice as long as it’s
smaller counterparts and narrower (bag size 4-⁄”L x 5-⁄” W) to accommodate large forestocks.
PMBAG10 . . . . . . . Large Sausage Bag
Half Moon Bag — This bag will accommodate any forend up to 6” wide.
Bag size: 1-⁄” W x 7-⁄” L x 1-⁄” H
PMBAG11 . . . . . . . Half Moon Bag
Standard Rear Bag — This rear bag is used mainly to take care of high
butt stocks on a large number of magnum rifles and similar rifles. Bag size
- 5” wide by 6-⁄” long and 2-⁄” high at the front, end then tapers to the
rear to match the shape of the rifle stock
PMBAG12 . . . . . . . Standard Rear Bag
Large Sausage Front Bag, Half Moon Front Bag, Standard Front Bag
Rail Front Bag These bags are the same design as the Owl Ear Front bags
except these have two additional bags attached so the bag can rest on rounded surfaces such as the front rail on a fence or highseat, prevents your rifle
stock from getting damaged.
PMBAG04 . . . . . . . Small Owl Ear Rail Bag(1-⁄” to 1-⁄”)
PMBAG05 . . . . . . . Regular Owl Ear Rail Bag(2” to 2-⁄”)
PMBAG06 . . . . . . . Wide Owl Ear Rail Bag(2-⁄” to 3”)
DUNRUD BAG STABILIZER
Owl Ear Rail Bags
RS14775 . . . . . . . . . Zircon Sand
15
LU
S
SO
A
LO DI
NG
RE
RS14770 . . . . . . . . . Bag Stabilizer
N
This bag stabilizer was designed to be placed under your rear bag to provide
extra stability. The doughnut shape accessory fits underneath Protektor or
Bald Eagle rear bags. Some rear bags tend to rock due to the rounding they
sometimes get. The bag stabilizer prevents them from rocking. The bag stabilizer also raises the rear bag for those shooting stocks with a straight comb.
Made of rubber.
ZIRCON SAND Our extra heavy Zircon sand is sold in 10 pound plastic
buckets and is enough to fill a large rear bag with a little left over. We specifically recommend filling your sand bags with it and have found the extra
weight helps to stabilise your rifle.
TIO
BRASS CASES
Brass Cases & Wads
100/Pack
WU22H . . . . . . . . . . 22 Hornet
WU220 . . . . . . . . . . 220 Swift
WU222 . . . . . . . . . . 222 Remington
WU22250 . . . . . . . . 22-250 Remington
WU223 . . . . . . . . . . 223 Remington
WU243 . . . . . . . . . . 243 Winchester
WU6MM . . . . . . . . 6mm Remington
WU250 . . . . . . . . . . 250 Savage
WU2506 . . . . . . . . . 25-06 Remington
WU65X55 . . . . . . . . 6.5mm x 55 Swedish Mauser
WU270 . . . . . . . . . . 270 Winchester
WUN280 . . . . . . . . . 280 Remington (Nickel)
WU7MM . . . . . . . . 7mm Remington Mag
WU708 . . . . . . . . . . 7mm-08 Remington
WU30C . . . . . . . . . . 30 MI Carbine
WU762X39 . . . . . . . 7.62x39 Russian
WU3030 . . . . . . . . . 30-30 Winchester
WU300S . . . . . . . . . 300 Savage
WU308 . . . . . . . . . . 308 Winchester
WU3006 . . . . . . . . . 30-06 Springfield
WU300HH . . . . . . . 300 H&H Magnum
WU300MAG . . . . . . 300 Winchester Mag
WU303B . . . . . . . . . 303 British
WU8MMSR . . . . . . 8mm Mauser
WU338 . . . . . . . . . . 338 Winchester Mag
WU375HH . . . . . . . 375 H&H Magnum
WU4570 . . . . . . . . . 45-70 Government
WU458 . . . . . . . . . . 458 Winchester Mag
100/Pack
RU17 . . . . . . . . . . . . 17 Remington
RU7X57 . . . . . . . . . 7mm x 57 Mauser
RUN222 . . . . . . . . . 222 Remington
RUN223 . . . . . . . . . 223 Remington
RUN22250 . . . . . . . 22-250 Remington
RUN243 . . . . . . . . . 243 Winchester
RUN2506 . . . . . . . . 25-06 Remington
RUN270 . . . . . . . . . 270 Winchester
RUN7MM . . . . . . . 7mm Remington Mag
RUN308 . . . . . . . . . 308 Winchester
RUN3006 . . . . . . . . 30-06 Springfield
RUN300M . . . . . . . 300 Winchester Mag
RU300WBY . . . . . . 300 Weatherby Mag
“N” designates Nickel Plated
A
LO DI
S
N
SO
16
LU
NG
RE
LPU220R . . . . . . . . 220 Russian
LPU222 . . . . . . . . . . 222 Remington
LPU223 . . . . . . . . . . 223 Remington
LPU6BR . . . . . . . . . 6mm BR
LPU243 . . . . . . . . . . 243 Winchester
LPU65X55 . . . . . . . 6.5 x 55 Swedish
LPU308 . . . . . . . . . . 308 Winchester
LPU3006 . . . . . . . . . 30-06 Springfield
LPU93X62 . . . . . . . 9.3 x 62
TIO
WHILE STOCKS LAST
100/Pack
FDGMU223 . . . . . . 223 Remington
FDGMU308 . . . . . . 308 Winchester
FDGMU3006 . . . . . 30-06 Springfield
FDGMU300M . . . . 300 Winchester Mag
NICKEL PLATED BRASS
FDUN222 . . . . . . . . 222 Remington
FDUN22250 . . . . . . 22-250 Remington
FDUN223 . . . . . . . . 223 Remington
FDUN270 . . . . . . . . 270 Winchester
FDUN7M . . . . . . . . 7mm Remington Mag
FDUN708 . . . . . . . . 7mm-08 Remington
FDUN3006 . . . . . . . 30-06 Springfield
FDUN308 . . . . . . . . 308 Winchester
FDUN300M . . . . . . 300 Winchester Mag
HRN243 . . . . . . . . . 243 Winchester
HRN257R . . . . . . . . 257 Roberts +P
HRN308 . . . . . . . . . 308 Winchester
HRN303 . . . . . . . . . 303 British
HRN3006 . . . . . . . . 30-06 Springfield
HRN338 . . . . . . . . . 338 Winchester
100/Pack
All brass is new and primed. Frontier Headstamp.
Winchester Mfr’d - 257, 303, 338
Remington Mfr’d - 243, 257, 308, 30-06, 303
Subject to Availability
BULK RIFLE
BRASS
Subject to Availability
RWSU22H . . . . . . . 22 Hornet
RWSU222 . . . . . . . . 222 Remington
RWSU223 . . . . . . . . 223 Remington
RWSU22250 . . . . . . 22-250 Remington
RWSU243 . . . . . . . . 243 Winchester
RWSU65X55 . . . . . 6.5mm x 55 Swedish
RWSU65X57 . . . . . 6.5mm x 57 Mauser
RWSU65X68S . . . . 6.5mm x 68S
RWSU270 . . . . . . . . 270 Winchester
RWSU7X57 . . . . . . 7mm x 57 Mauser
RWSU7X64 . . . . . . 7mm x 64 Brenneke
RWSU7X65R . . . . . 7mm x 65 Rimmed
RWSU7MM . . . . . . 7mm Rem Mag
RWSU308 . . . . . . . . 308 Winchester
RWSU3006 . . . . . . . 30-06 Springfield
RWSU300M . . . . . . 300 Winchester Mag
RWSU8X68S . . . . . 8mm x 68S
RWSU93X62 . . . . . 9.3mm x 62
RWSU93X74R . . . . 9.3mm x 74R
RWSU375HH . . . . . 375 H&H Mag
Sellier & Bellot
100/Box
GOLD MEDAL
RIFLE BRASS
20/Box
20/Pack
SBU222 . . . . . . . . . . 222 Remington
SBU223 . . . . . . . . . . 223 Remington
SBU243 . . . . . . . . . . 243 Winchester
SBU65X55 . . . . . . . 6.5mm x 55 Swedish
SBU65X57 . . . . . . . 6.5mm x 57
SBU65X57R . . . . . . 6.5mm x 57R
SBU7X57 . . . . . . . . 7mm x 57 Mauser
SBU7X57R . . . . . . . 7mm x 57 Rimmed
SBU7X64 . . . . . . . . 7mm x 64 Brenneke
SBU7X65R . . . . . . . 7mm x 65 Rimmed
SBU308 . . . . . . . . . . 308 Winchester
SBU3006 . . . . . . . . . 30-06 Springfield
SBU303B . . . . . . . . 303 British
SBU93X74R . . . . . . 9.3 x 74R
100/Pack
NPU222 . . . . . . . . . 222 Remington
NPU22250 . . . . . . . 22-250 Remington
NPU243 . . . . . . . . . 243 Winchester
NPU65X55 . . . . . . . 6.5mm x 55 Swedish
NPU65X54 . . . . . . . 6.5mm x 54 Mannlicher
NPU270 . . . . . . . . . 270 Winchester
NPU7X64 . . . . . . . . 7x64 Brenneke
NPU7MM. . . . . . . . 7mm Remington Mag
NPU308 . . . . . . . . . 308 Winchester
NPU3006 . . . . . . . . 30-06 Springfield
NPU300M . . . . . . . 300 Winchester Mag
NPU93X62 . . . . . . . 9.3 x 62
NPU375HH . . . . . . 375 H&H Mag
NPU416 . . . . . . . . . 416 Rigby
NPU470 . . . . . . . . . 470 Nitro Express
SHOTGUN RELOADING WADS
CLAYBUSTER
Ga.
CB0118 . . . . . . .12
CB1118 . . . . . . .12
CB1100 . . . . . . .12
CB1078 . . . . . . .20
CB1034 . . . . . . .28
CB1050 . . . . . . .410
Replaces
WT12 1 ⁄ oz.
WAA12 1 ⁄ oz.
WAA12SL/F1 1 oz.
WAA20 ⁄ oz.
WAA28 ⁄ oz.
WAA410 ⁄ oz.
WINCHESTER
Ga.
WAA12 . . . . . . .12
WAA12R . . . . . .12
WAA12F114 . . .12
WAA12SL . . . . .12
WAA12L . . . . . .12
WAA20 . . . . . . .12
WAA20F1 . . . . .20
WAA28 . . . . . . .28
WAA41 . . . . . . .410
Description
White: 1 to 1 ⁄ oz.
Red: 1 ⁄ to 1 ⁄ oz.
Yellow: 1 ⁄ to 1 ⁄ oz.
Pink: 1 to 1 ⁄ oz.
Grey: ⁄ oz.
White: ⁄ to 1 ⁄ oz.
Yellow: 1 to 1 ⁄ oz.
Most Applications
Most Applications
LOOK!
SR7625
Clean burning powder with applications in 12-ga.
down to 28-ga. target and field loads.
IMR762505 . . . . . . . 8 oz.
SR4756
This single base propellant is primarily designed
for shotshell applications requiring a slow burning propellant. Designed for magnum shotshells.
Recommended for 20 and 28-ga. target loads
IMR475605 . . . . . . . 8 oz.
“HI-SKOR®” 800-X
Slower burning than 700-X, it has applications in
smaller gauges, target loads, and 12-ga..
IMR800X05 . . . . . . 8 oz.
SR4759
This single base propellant is ideally suited to cast
bullet rifle loads.
IMR475905 . . . . . . . 8 oz
RIFLE PROPELLANTS
IMR-4227
Originally intended for small cartridges such as the
Hornet and Bee but has proved useful in a wide
spread of high performance handgun loads.
IMR42271 . . . . . . . . 1 lb.
IMR-4198
The powder that showed early 222 shooters, including the Benchresters, how good that cartridge was.
Also very useful in large calibre, non-bottleneck
cases like the 444 Marlin and .45-70.
IMR41981 . . . . . . . . 1 lb.
IMR-3031
Recommended for medium-size cases such as the
.30-.30 and .358, it is also useful for mid-range
loads and delivers fine results in cases as large as
the .460 Weatherby.
IMR-4064
Medium-burning powder well suited for a wide
range of calibres. Long a favourite of Jack
O'Connor in the .220 Swift.
IMR40641 . . . . . . . . 1 lb.
H414
This spherical powder has an extremely wide
range of use. From the 22-250 Rem to the 375
H&H Magnum, it will give excellent results. It
is simply ideal in the 30-06. It delivers consistent charge weights through nearly all powder
measures. H414 yields similar results to H4350
in most cartridges, although charge weights will
vary.
IMR-4320
Like most medium-burning powders, this one is
versatile, giving good results in cases as large as the
.460 Weatherby. Also meters well.
IMR43201 . . . . . . . . 1 lb.
IMR-4350
An early slow-burning powder specifically designed
for bottlenecked magnum cartridges. Gives consistent results.
IMR43501 . . . . . . . . 1 lb.
IMR-4831
Another World War II powder, this slow burning powder made most of today's high velocity magnum cartridges practical. Excellent in .264
Winchester, 7mm Remington Magnum and .338
Magnums.
IMR48311 . . . . . . . . 1 lb.
IMR-7828
Slowest burning of the IMR™ rifle powders, this
is at its best with bottlenecked large capacity cases
and heavy bullets.
IMR78281 . . . . . . . . 1 lb.
We do not backorder Powder.
HD3801 . . . . . . . . . . 1 lb.
HD4141 . . . . . . . . . . 1 lb.
H4831SC
Ballistically, this Extreme Extruded powder is the
exact copy of H4831. Physically, it has a short
grain size and the more compact kernels allow the
powder to flow through most powder measures
more smoothly. Allows for more uniform charge
weights and better loading density.
HD4831SC1 . . . . . . 1 lb.
VARGET
The first of Hodgdon’s revolutionary Extreme
Extruded Powders, VARGET features small
extruded grains for uniform metering, insensitivity to hot/cold temperatures and higher energy
for improved velocities. Outstanding performance
in cartridges such as 223 Rem, 22-250 Rem, 308
Win, 30-06 Sprg, 375 H&H Mag and more.
HDVAR1 . . . . . . . . . 1 lb.
H50BMG
This new generation Extreme Extruded rifle propellant is a clean burning powder designed for the
50 calibre BMG cartridge. Because it shares the
same technology as Varget, H50BMG displays a
high degree of thermal stability in temperature
extremes.
HD50BMG1 . . . . . . 1 lb.
Other powders from the Hodgdon range
to be added soon
SO
A
LO DI
17
LU
NG
RE
IMR30311 . . . . . . . . 1 lb.
H380
A spherical powder first used by the late Bruce
Hodgdon in his 22 calibre wildcat (now 22-250
Rem). H380 is a superb performer in the 220
Swift, .243 Win, .257 Roberts and other varmint
cartridges.
S
IMR700X05 . . . . . . 8 oz.
IMR-4895
Countless tons of this propellant were used by
the U.S. government to load .30-06 ammunition
during World War II. Probably the most versatile
powder ever made. Excellent results with certain
bullets in cases from the .17 Remington to the .458
Winchester Magnum.
IMR48951 . . . . . . . . 1 lb.
N
“HI-SKOR®” 700-X
Shotgun double-base powder developed for 12-ga.
components.
PROPELLANT
Powder and Primers are
non-returnable. Please
order carefully.
TIO
PROPELLANT
PRIMERS
N133
The powder is very close to IMR-4198 in burn rate.
Thus, it is ideal for 222 Rem., 223 Rem. and other
applications where a relatively fast burning rifle
propellant is required. Probably the most popular
PPC benchrest powder for the last several years.
RELODER 7
Designed for small calibre varmint loads, it
meters consistently, and meets the needs of
the most demanding bench rest shooter.
ALRL71 . . . . . . . Reloder 7
VOYN1332 . . . . . . . . . . N133
VOYN1338 . . . . . . . . . . N133 8 lb.
N140
This powder can usually be used in place of
Alliant Reloader 15, IMR-4320 and Hodgdon 380.
Applications include 222 Remington Mag, 22-250
Remington, 308 Winchester, 30-06 Springfield, 375
H&H Mag, etc...
VOYN1402 . . . . . . . . . . N140
RELODER 15
The best all-round medium speed rifle powder, it provides excellent .30 cal. performance,
and is ideal for high-velocity varmint loads.
ALRL151 . . . . . . Reloder 15
RELODER 19
Provides superb accuracy in most medium
and heavy rifle loads and is the powder of
choice for 30-06 and .338 calibres.
ALRL191 . . . . . . Reloder 19
N150
This is moderately slow burning rifle powder that
can help refine cartridge ballistics when N140 is a
little too fast and N160 a little too slow. Works well
in many cartridges.
ALRL221 . . . . . . Reloder 22
N160
A relatively slow burning rifle powder ideally suited
to many standard and magnum cartridges requiring a slow propellant. Works well in many applications previously using various 4350’s, Alliant
Reloader 19, and various 4831’s. Ideal applications
are 243 Winchester, 25-06 Rem, 270 Winchester,
7mm Remington Magnum, 30-06 Springfield, 300
Winchester Mag, 338 Winchester Mag, 375 H&H
Magnum, etc...
VOYN1602 . . . . . . . . . . N160
N540, N550 and N560
These are hybrids of single and double based
powders. The results indicate a 5 to 10 percent
increase in velocity while maintaining pressure
levels. For most cartridges this increase is likely to
be 100-200 fps.
RELODER 25
Alliant’s newest rifle powder suitable for
large case capacity cartridges using heavy
bullets.
LOOK!
Powder and Primers are nonreturnable. Please order carefully.
S
N
SO
18
LU
CENTERFIRE
CCI200 . . . . . Large Rifle
CCI400 . . . . . Small Rifle
CCI250 . . . . . Large Rifle Magnum
CCI450 . . . . . Small Rifle Magnum
CCIBR2 . . . . Large Rifle BR
CCIBR4 . . . . Small Rifle BR
CENTERFIRE
RM612 . . . .
RM712 . . . .
RM912 . . . .
RM912M . .
Small Rifle
Small Rifle BR
Large Rifle
Magnum Rifle
Now...
The Quality of Factory
Ammo
Now you can make all your reloads 100% watertight,
100% oil proof and 100% solvent proof. Just wipe a little
over the primer with the included applicator and a little
around the mouth of the case, if you wish, and you’re
done. It does not damage your brass or contaminate the
powder.
GRCPS
Custom Primer Sealant
NG
RE
We do not backorder Powder or Primers.
A
LO DI
Small Rifle
Large Rifle
Large Rifle Mag
Sml Rifle Match
Large Rifle Match
Large Rifle Mag Match
VOYN1652 . . . . . . . . . . N165
VOYN5402 . . . . . . . . . . N540
VOYN5502 . . . . . . . . . . N550
VOYN5602 . . . . . . . . . . N560
ALRL251 . . . . . . Reloder 25
FD205 . . . . . . . . .
FD210 . . . . . . . . .
FD215 . . . . . . . . .
FDGM205M . . . .
FDGM210M . . . .
FDGM215M . . . .
VOYN1502 . . . . . . . . . . N150
N165
A very slow burning magnum rifle propellant for
use with heavy bullets. Applications begin with
very heavy bullets in 30-06 Springfield and includes
338 Winchester Magnum.
RELODER 22
Alliant’s best performer for big game loads.
Highest velocities and tightest groups from
.270 to .416 calibres.
CENTERFIRE
TIO
LEE PRECISION
HAND PRESS KIT
The perfect portable reloading
press kit. Includes Hand press,
ram prime, powder funnel, case
sizing lube.
LEE90179
HAND PRESS
This press is more powerful
than some bench mounted tools,
even large Magnum cases such
as .375 H&H can be full length
sized and loaded. Uses standard
⁄"x14 dies.
LEE90685
CHALLENGER PRESS KIT
Includes dies, shell holder, powder dipper, powder funnel, case
sizing lubricant (except with
carbide dies), ram prime tool
and complete instructions with
Challenger Press. Uses standard
⁄"x14 dies.
LEE90180
RELOADER PRESS
Exclusive balanced lever that
can’t drop down to pinch your
fingers. Unlimited hand clearance that only a “C” frame can
offer. Works equally well with
the right or left hand. Even if
you already own a press, an
extra press is always useful for
decapping, bullet seating etc..
LEE90587
TURRET PRESS
Compound leverage full length
resizes the largest magnum cases
with ease. Has built in primer
catcher, longer stroke, more
hand clearance and comfortable wood grip. Completely
reversible for right or left hand
use. Snap in/out turret. Change
primer size by lifting out the
primer arm and reversing.
Accepts standard ⁄”x14 dies.
SAFETY POWDER SCALE
110 gr. capacity scale accurate to 0.1
gr. Ideal size for weighing powder
charges. Magnetically dampened
phenolic safety beam won't bend.,
remains accurate. Stainless steel
razor blade balance. Beam lifter
raises beam as charge weight is
approached. Masked vernier ⁄ gr.
poise, non-magnetic stainless steel
ball poise. Anti-static aluminium
pan. Heavy die cast base.
LEE90681
TURRETS
Once the dies have been adjusted,
they never need re-adjusting. Simply
snap the turret and dies into the
press and you’re ready to reload
another calibre.
LEE90497
3 Hole for Turret press & Pro 1000
LEE90079
5 Hole for Load Master press
SO
A
LO DI
19
LU
NG
RE
LEE90496
LEE90576 . . . w/Auto Index
LEE90174 . . . . . . Anniversary Kit w/o Manual
LEE90962 . . . . . Anniversary Kit incl Manual
S
CHALLENGER PRESS
The most versatile “O” press
made. Larger than most, with
a thirty degree offset frame for
easy loading. Compound leverage makes sizing the largest
cases a one finger operation.
Toggle stop reduces lever travel.
Built-in primer catcher with
screw attached cover.
Accepts standard ⁄"x14 dies.
ANNIVERSARY RELOADING KIT
A set of Lee dies is all you need to reload any cartridge. You get a
complete powder handling system, Perfect Powder Measure, Lee
Safety Scale, Powder Funnel and powder data manual with over
one thousand different loads tested and recommended by Hodgdon
Powder Company.
Case preparation tools include cutter and lock stud to trim your
cases. Order the correct case length gauge and shell holder for the
calibre you will load for. An inside/outside chamfer tool and a tube
of premium sizing lube. You also get the Lee Auto Prime along with
a set of shell holders for over 115 different cartridges.
N
LEE90045
TIO
LEE PRECISION
PERFECT
POWDER MEASURE
This measure is unique because it
solves all of the problems common
to ordinary drum type measures.
It eliminates cut powder and jerky
action, stops drum binding, meaningful calibration, safer, changing
powder is fast and easy: tapered
drop tube prevents powder bridging.
AUTO PRIME
Fastest, most accurate priming tool
made. Automatically feeds and
installs primers just as fast as you
can place cases in the holder. Each
primer is perfectly seated with the
feel appreciated by precision reloaders. Easy to load. Built-in primer
flipper turns them right side up.
Both large and small trays included.
LEE90230
Auto Prime, Improved Priming Tool and
Ram Prime
LEE90058
LEE90231
RAM PRIME
Primes on the press up-stroke for a
more sensitive feel. Includes easy to
change punches for both large and
small primers. Fits all brands of
presses.
AUTO-DISK POWDER
MEASURE
The Auto-Disk powder measure automatically dispenses an exact charge.
The case itself actuates the measure
while the neck is being flared. The
powder measure is actuated during the
press's greatest mechanical advantage.
This assures a smooth even action of
the measure. A built-in powder baffle
and charge disks, precisely moulded
from glass reinforced engineering
grade plastic all contribute to the
previously unattainable uniformity
of charges. Each Auto-Disk Measure
comes with four charge disks containing six cavities each, a total of 24 cavities. Charges from 2 to 24 grains.
LEE90106
LEE AUTO-PRIME II
Auto Prime II
Powder Measure Kit
LEE90192
PRO AUTO-DISK POWDER
MEASURE
Commercial reloaders or competitive
shooters first choice ! Elastomer wiper
and teflon coated metal casting make
this the smoothest operating measure.
Will not cut powder and almost totally
eliminates leakage. Large hopper
with shut-off valve is attached with
brass thumb nuts for the ultimate disk
changing convenience.
Increased safety with positive pullback lever. Includes swivel adaptor.
Powder Funnel
LU
S
N
SO
20
NG
RE
A
LO DI
TIO
LEE90377
POWDER MEASURE KIT
Fifteen safety yellow measures are
uniformly graduated in cubic centimetres. Updated slide card has over
1,300 loads and includes information on most currently manufactured powders
LEE90100
POWDER FUNNEL
A large unbreakable funnel that
fits all cases from .22 to .45 calibre.
Hole in flange permits mounting on
the Lee Turret, shelf or bench.
LEE90190
Die Lock Rings
DIE LOCK RINGS
Finger tighten– set and forget, they
never move. Just be sure to always
loosen your dies by turning the ring,
not the die.
LEE90534
LEE90429
PRO AUTO-DISK UPDATE KIT
Update any Lee Auto-Disk powder
measure with all the PRO features, except for the teflon coating.
Includes oversize hopper and valve
assembly for fast and easy transfer
between die sets, pullback lever,
chain and attachment, solid brass
thumb nuts. With free adjustable
charge bar.
Uses standard shell holders and will
fit any brand of loading press with
a vertical ram. Primes on upstroke
for most sensitive feel. Includes
primer feeders and punches for both
large and small primers. Primers are
flipped right side up by shaking the
tray. Primer tray detaches for filling.
LEE90107
LEE90578
SAFETY DISK
POWDER MEASURE
Lever operated and stand mounted.
Perfect for hand charging your
cases. Stand, four disks and mounting screws are included.
IMPROVED PRIMING TOOL
Quick release shell-holders – simply
depress tab and slide out. This is
the same tool as the Auto Prime but
without automatic feed.
LEE90231
Chamfer Tool and Primer Pocket Cleaner
CHAMFER TOOL
Must be used after case trimming.
Unique design cuts faster without
chatter. One turn does the job.
Chamfers and deburrs inside and
outside of case necks.
LEE90109
PRIMER POCKET CLEANER
Double ended design cleans both
large and small primer pockets.
Primers can be fully seated properly.
LEE90101
LEE90103 . . . . . . . . . 22 Calibre Decapper & Base
LEE90102 . . . . . . . . . 30 Calibre Decapper & Base
DECAPPING DIE
An absolute must for those
who clean cases before reloading. Cases need not be clean
nor lubed when using this
die. Guaranteed unbreakable
decapper easily removes primers. One size fits all.
PACESETTER DIES
LEE Pace-Setter dies include the exclusive Lee Factory
Crimp™ Die to produce factory-like ammunition with
improved utility and accuracy. The die set also includes
a conventional bullet seater and roll crimper. You can
choose the type of crimp you desire. They also include a
shell holder, powder dipper, load data and are packaged
in the famous red plastic storage box.
SHELLHOLDER SETS
Eleven of the most popular sizes to fit 115 different cartridges. Each set includes shell holder chart
showing compatible cartridges.
LEE90196 Red Shellholder Storage box
LEE90197 Green Storage Box with 11
Universal Shellholders
LEE90198 Red Storage Box with 11
Shellholders for the LEE Auto Prime
SHELLHOLDERS
DELUXE RIFLE DIES
The patented, full length resizing die allows you to produce ammunition to factory-new specifications that can
be used in any rifle. When you’re ready to custom tailor
the most accurate ammunition for your bolt action or
single shot, the patented Collet Neck Sizing die is up to
the task. Includes bullet seater, shell holder and powder
dipper with load data
LIMITED PRODUCTION DIES
The same features of our standard dies, but do not
include a Lee Factory Crimp™ Die. The price is slightly
higher because production quantities are lower. Include
shell holder, powder dipper and load data.
RGB SERIES DIES - Really Great Buy !
LEE90518
LEE90519
LEE90520
LEE90521
LEE90522
LEE90523
LEE90524
LEE90525
LEE90526
LEE90527
LEE90528
LEE90529
LEE90199
LEE90001
LEE90002
LEE90003
SP/O
SP/O
LEE90004
SP/O
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Auto Prime,
Improved Priming
Tool
LEE90201
LEE90202
LEE90203
LEE90204
LEE90205
LEE90206
LEE90207
LEE90208
LEE90209
LEE90210
LEE90211
LEE90212
LEE90213
LEE90272
LEE90017
LEE90200
N/A
N/A
LEE90023
LEE90020
22 Hornet
221 Fireball
222 Remington
223 Remington
22-250 Remington
220 Swift
243 Winchester
6mm Remington (244 Rem)
25-20 W.C.F
250 Savage (250-3000)
257 Roberts
25-06 Remington
6.5 x 55 Swedish Mauser
270 Winchester
284 Winchester
7mm TCU
7 x 57 Mauser
7mm-08 Remington
280 Remington (7mm Exp)
7mm Remington Magnum
7 x 64 Brenneke
7.5 Swiss (Schmidt Rubin)
7.62 x 39 Russian
30 M1 Carbine
30-30 Winchester
308 Winchester
30-06 Springfield
300 H&H Magnum
300 Winchester Magnum
300 Weatherby Magnum
303 British
8 x 57 Mauser
375 H&H Magnum
444 Marlin
45-70 Government
LEE90111
LEE90112
LEE90113
LEE90114
LEE90116
LEE90118
LEE90119
LEE90120
LEE90121
LEE90122
LEE90123
LEE90124
LEE90126
LEE90128
LEE90129
LEE90145
LEE90130
LEE90167
LEE90166
LEE90131
LEE90236
LEE90132
LEE90133
LEE90135
LEE90136
LEE90139
LEE90140
LEE90141
LEE90142
LEE90143
LEE90144
LEE90148
LEE90149
LEE90164
LEE90151
LEE90152
CUTTER AND LOCK STUD
The Cutter and Lock Stud works for all calibres.
Squares the case mouth for more accurate bullet
seating. Works in conjunction with Case Length
Gauge & Shell Holder, see above.
LEE90110 . . . . .Cutter & Lock Stud
LEE90275 . . . . .Cutter only with Ball Grip
SP/O - Special Order
N/A - Not Available
SO
A
LO DI
21
LU
NG
RE
The same features as LEE Pacesetter Dies at 50% less
tolerance. They cost less because they do not include
a Lee Factory Crimp™ Die, Shell Holder and Powder
Dipper.
For Presses &
Auto-Prime II
After a case has been loaded a number of times, it will
stretch beyond maximum length and must be trimmed.
The Case Length Gauge (Pilot) and Shell Holder must
be ordered as Case Length Gauge and Shell Holder for
each calibre. (Refer below for calibre listing)
S
A collet squeezes the case
neck against a precision
mandrel for a perfect bullet fit
with minimum run-out. No
case lube is needed. Cases last
many times longer. These dies
size only the neck to preserve
the perfect fit of fire forming.
A dead length bullet seater is
included in the famous yellow
plastic storage box.
CASE LENGTH GAUGE & SHELLHOLDER
N
COLLET DIES
LEE90292
LEE PRECISION
DECAPPER & BASE
Easily removes crimped in primers from military cases,
unbreakable.
TIO
LEE SHELLHOLDER
REFERENCE
LEE PRECISION
Shell
Holder
The new LEE Zip Trim Power Head
There is no better system to check and trim cases than with the LEE case length gauge
and cutter. You don’t need an expensive caliper to set length and never waste even a
single case setting up with the cut and try system common to all other brands.
The piloted cutter assures the case mouths are absolutely square and true to
the case neck.
Best of all, the fixed length design assures it will never go out of adjustment.
The Zip Trim rotates your cases like a lathe . While your case is
mounted you can quickly trim, chamfer and polish your cases.
The Zip Trim power head features a steel spindle that rotates
in a housing made of tough nylon that will withstand chemical or mechanical attack — the same material being used in
today’s polymer framed firearms. The spindle is rotated by a
recoil mechanism that puts over a 1/4 horsepower and 1,700
rpm at your fingertips — the spindle will
start and stop
instantly. Torque automatically decreases as the rpm
increases at the end of the cut for a perfect feel and finish. The head has two permanent mounting lugs and a socket to accept a “C” clamp for a completely portable set up.
The Lee 3 Jaw Chuck fits the Zip Trim and holds any case from 25 ACP to monster 460 Weatherby. The hardened steel
jaws gently and accurately centre the case while the spindle securely clamps the case. Insert your case with a fraction of a
turn.
LEE90899 . . . . . . . . Lee Zip Trim Power Head includes mounting hardware
LEE90608 . . . . . . . . Lee Universal 3 Jaw Chuck (not illustrated)
LEE90607 . . . . . . . . Lee Case Spinner Stud (not illustrated)
We also stock LEE RGB
SERIES dies - supplied
w/o shellholder, factory
crimp die and powder dipAuto
per. See Price List
Limited
Case
Universal
Prime
LEE Die Reference Chart
PaceSetter
Die Set
Cartridge
Deluxe
Die Set
Length
Gauge
Shell
Holder
Shell
Holder
LEE90770
LEE90804
LEE90521
LEE90204
22 Hornet
LEE90500
LEE90705
LEE90599
LEE90111
LEE90524
LEE90020
LEE90204
222 Remington
LEE90501
LEE90706
LEE90602
LEE90113
LEE90521
223 Remington
LEE90502
LEE90707
LEE90604
LEE90114
LEE90521
LEE90204
22-250 Remington
LEE90503
LEE90708
LEE90606
LEE90116
LEE90519
LEE90202
LEE90702
LEE90609
LEE90118
LEE90527
LEE90210
LEE90709
LEE90610
LEE90119
LEE90519
LEE90202
LEE90542*
243 Winchester
LEE90504
6MM PPC
LEE90796*
LEE90802
LEE90529
LEE90212
6mm Remington (244 Rem)
LEE90540
LEE90710
LEE90120
LEE90519
LEE90202
257 Roberts
LEE90551
LEE90703
LEE90123
LEE90519
LEE90202
25-06 Remington
LEE90536
LEE90711
LEE90124
LEE90519
LEE90202
260 Remington
LEE90298*
6.5 x 55 Swedish Mauser
LEE90627
270 Winchester
LEE90505
LEE90519
LEE90202
LEE90712
LEE90611
LEE90126
LEE90520
LEE90203
LEE90713
LEE90612
LEE90128
LEE90519
LEE90202
LEE90129
LEE90519
LEE90202
284 Winchester
LEE90777*
7 x 57 Mauser
LEE90541
LEE90714
LEE90130
LEE90519
LEE90202
7mm-08 Remington
LEE90537
LEE90723
LEE90167
LEE90519
LEE90202
280 Remington (7mm Exp)
LEE90552
LEE90724
LEE90166
LEE90519
LEE90202
LEE90522
LEE90205
7mm Remington Magnum
LEE90538
7 x 64 Brenneke
LEE90720
LEE90613
LEE90131
LEE90236
LEE90527
LEE90210
30-30 Winchester
LEE90506
LEE90771*
LEE90716
LEE90631
LEE90136
LEE90520
LEE90203
308 Winchester
LEE90507
LEE90718
LEE90614
LEE90139
LEE90519
LEE90202
30-06 Springfield
LEE90508
LEE90715
LEE90615
LEE90140
LEE90519
LEE90202
LEE90141
LEE90522
LEE90205
LEE90616
LEE90142
LEE90522
LEE90205
LEE90143
LEE90522
LEE90205
LEE90654
LEE90144
LEE90522
LEE90205
300 H&H Magnum
LEE90560*
LEE90539
300 Weatherby Magnum
LEE90547
8 x 57 Mauser
LEE90544
LEE90726
LEE90722
LEE90558
303 British
LEE90727
LEE90717
LEE90719
LEE90148
LEE90519
LEE90202
LEE90546
LEE90721
LEE90149
LEE90522
LEE90205
375 H&H Magnum
LEE90559
LEE90729
LEE90164
LEE90522
LEE90205
416 Remington
LEE90805*
45-70 Government
LEE90561*
* Does not include Factory Crimp Die
A
LO DI
S
N
SO
22
NG
RE
Collet
Die Set
17 Remington
220 Swift
LU
Production
Die Set
TIO
LEE90152
LEE90522
LEE90205
LEE90525
LEE90208
4
7
7
3
2
6
3
10
4
4
4
4
2
10
2
2
2
2
2
2
2
2
4
2
2
6
2
3
2
5
5
2
2
3
10
5
2
2
5
2
5
2
2
2
4
3
2
5
5
5
5
2
3
7
3
12
16
3
3
2
2
5
2
5
5
5
5
5
2
3
3
6
3
2
2
2
5
17
8
5
5
8
2
5
2
5
3
2
5
3
5
5
14
3
8
3
5
8
18
17
14
11
8
5
Cartridge
17 Remington
22 Hornet
22 K Hornet
22 Savage
22 BR
218 Bee
219 Zipper
220 Swift
221 Fireball
222 Remington
222 Rem Mag
223 (5.56mm)
224 Clark (22/257)
225 Winchester
22-250
240 Weatherby
243 Winchester
6mm Remington
244 Remington
6mm Int'l
6mm/284
6mm-06
6x47 (6mm/222M)
25/284
25-06
25-20 Winchester
250 Savage
25/35
257 Roberts
257 Weatherby
303/25
6.5mm-06
6.5mmx57
6.5x55 Swedish Mauser
6.5 Japanese
6.5 Rem Mag
6.5 Carcano
260 Remington
264 Win Mag
270 Winchester
270 Weatherby
280 Remington
7mm-08
7mm BR
7mm TCU
7x30 Waters
7x57mm Mauser
7x61 Sharpe & Hart
7mm Rem Magnum
7mm Weatherby
7mm STW
284 Winchester
7.5mm Schmidt-Rubin
30 M1 Carbine
7.62x53 Mauser
7.62x39
7.62x54 Russian
30 Herrett
30-30 Win (30 WCF)
300 Savage
308 Win (7.62 NATO)
30-40 Krag (30 US)
30-06 Springfield
300 H&H Magnum
300 Weatherby
300 Win Magnum
308 Norma Magnum
303 British
7.7 Japanese
32 Win Special
32 Win SL
32-20 (32 WCF)
32-40 Winchester
8x57 Mauser
8mm-06
8mm Man Schoe
8mm Rem Magnum
8mm Lebel
33 Winchester
338 Win Magnum
340 Weatherby
348 Winchester
35 Remington
35 Winchester
35 Whelen
350 Rem Magnum
356 Winchester
358 Winchester
358 Norma Magnum
375 Winchester
375 H&H Magnum
375 Weatherby
38-40 Winchester
38-55 Winchester
40-82 Winchester
408 Winchester
416 Remington
416 Rigby
43 Mauser
43 Spanish
44-40
444 Marlin
45-70 Govt.
458 Win Magnum
REDDING BOSS PRO-PAK
RELOADING KIT
Here is one press that has
all the features Reloaders
look for. It’s cast iron
construction insures
that it will last a lifetime, yet it is priced
with light-duty
aluminium presses! The BOSS
is powerful,
remarkably easy
to use, and yet
sensitive enough
to seat primers
without crushing
them. Take a look
at all the features The
Boss offers and you’ll
be convinced that when it
comes to “O” Type reloading presses, this one is truly “The Boss”.
RED97000 . . . . .BIG BOSS II Press
REDDING
REDDING BIG BOSS II RELOADING
PRESS
This kit was created for both the first-time
reloader to get started right and for the advanced
reloader desiring to upgrade his equipment.
“You never waste your money
when you buy quality tools.”
REDDING ULTRAMAG RELOADING
PRESS
The Boss Pro-Pak contains the following:
• The Boss Reloading Press—Our best selling
press. Solid cast iron “O” frame construction
to last you a lifetime. Includes primer catcher.
• Model #2 Powder and Bullet Scale—Our
best magnetically dampened scale. Simply
the most sensitive, most accurate scale on
the market.
• Powder Trickler—Heavy stable companion
to the powder scale for precise powder
charges.
• Reloading Dies—A set of series A reloading
dies and matching shellholder in your choice
of 50 popular rifle and pistol calibres
Veteran reloaders maintain that “Redding dies are the best you can get your hands on”.
We back them up with an unquestioned lifetime guarantee.
• Pad Style Case Lube Kit—Consists of our non-skid lube pad and our best case lube. A must for easy
reloading.
• Deburring Tool—Accepts cases from .17 to .45 calibre. The cutting edges are ground correctly for
clean chatterless cuts.
• Model #18 Case Preparation Kit Plastic accessory handle with all the tools and brushes you need to
properly clean your fired cases before resizing.
• Powder Funnel—Even our funnel is special—made of tough Lexan and nearly indestructible
• Metallic Cartridge Reloading— All new 3rd Edition. A single source for detailed information on
advanced handloading issues, while offering a wide variety of loading data.
“The largest and strongest press available for the
toughest reloading chores...”
(HANDLOADER, No. 148)
At first glance and you will see what sets the
ULTRAMAG apart from all other reloading
presses: the unique location of its compound
leverage system. Unlike other reloading presses
which connect the linkage to the lower half of the
RED20000 . . . . .BOSS Pro-Pak Reloading Kit
press, the ULTRAMAG’S leverage system is connected to the top of the press frame. This allows
DOUBLE “C” CLAMP
you to develop literally tons of pressure without
This clamp is ideal for clamping the Redding
the usual concern about press frame deflection
powder measure stand to a bench top. It will
or misalignment. The ULTRAMAG
accommodate a bench thickness of up to 2-1/4”
features a huge 4 3-1/4" frame opening
thick. May be used to mount any number of
and 4-1/8" of usable ram stroke, making
tools. Handy items for any reloading room.
this press ideal for loading outsized cartridges such as the old Sharps “Buffalo
RED30520 . . . . .Double C Clamp
Cartridges” and British “Nitro-Express”
rounds. Its unique long link compound
leverage system has more mechanical
advantage over a greater distance than
Spent primers are
any other reloading press on the market. automatically colThis makes “child's play” of difficult case lected in the large
diameter hollow
forming operations.
RED70000 . . . . .Ultramag Press
ram. They then drop
into a handy flexible
plastic tube that can
hold hundreds of
spent primers before
emptying, or be easily
routed to your trash
container
CASE PREPARATION KIT
All the tools you need in one package for removing dirt and
powder residue from the inside of case necks and primer
pockets. Kit comes complete with accessory handle, large
and small primer pocket cleaners and three (3) case neck
brushes to handle all cartridges from .22 thru .45 calibre.
RED18000 . . . . .Case Preparation Kit
DEBURRING TOOL
Removes burrs and bevels case mouths for easy bullet seating. Hardened precision ground flutes make
clean, easy, chatterfree cuts. Accepts all cases from
.17 to .45 calibre.
A
LO DI
S
23
LU
N
SO
RE
RED09000 . . . . .Deburring Tool
NG
The unique priming
arm automatically
swings into position
during the ram stroke
and flips out of the
way when not in use.
For maximum sensitivity at the lowest possible leverage, priming
is done at the end of
the ram stroke.
TIO
Redding reloading dies are considered by many to be the finest off the shelf 7/8-14 reloading dies
in production today. The quality of their dies and other reloading equipment is outstanding and the
people at Redding stand behind that quality with a lifetime commitment to their products.
REDDING
For a free colour Redding Reloading catalog please send £1.50 in stamps.
REDDING COMPETITION BUSHING NECK DIES
This revolutionary neck sizing die with interchangeable bushings
and patented design brings an advanced level of technology and
precision to shooters of all disciplines. Similar in concept to the
Redding Competition Bullet Seating die, the cartridge case is completely supported and aligned with the sizing bushing before sizing
begins.
As the sizing starts, the cartridge remains supported in the tightly
chambered, sliding sleeve as it moves upward while the floating sizing bushing centres on the case neck. The micrometer adjustment of
the bushing position delivers precise control to the desired amount
on neck length sizing. Dies are supplied without bushings. Sold
separately or as part of a set.
REDDING COMPETITION BULLET SEATING DIES
We feel the Redding Competition Bullet Seater is possibly the best
bullet seater on the market today. The machining performed on
them is precision work, and the sliding chamber is the smoothest we
have ever experienced in a seater. This micrometer-adjustable die is
calibrated in .001” increments for precise seating depth adjustments
and is infinitely adjustable (no clicks). It also has a “zero” set feature
that allows you to zero the micrometer to your rifle or favourite
seating depth. Sold separately or part of a set.
REDDING TYPE S — BUSHING STYLE NECK DIES
The Redding Type S Bushing Style Neck die allows reloaders to
precisely control case neck resizing by utilising interchangeable
bushings. The reloader can eliminate oversizing his brass by selecting the correct bushing size to suit his brass and chamber dimensions. Bushings are available in .001” increments. The decapping rod
is fitted with a standard size button to ensure the inside neck diameter is round for a proper bullet fit and a decapping pin retainer to
allow sizing without the expander button in place. The adjustable
expanding rod is adjustable and allows positioning of the bushing
to resize only the portion of the neck length that is desired. Dies are
supplied without bushing. Please refer to Advice note on selecting the
correct bushing size.
REDDING TYPE S — BUSHING STYLE FULL LENGTH DIES
Redding Type S Bushing Full Length Dies will allow you to full
length resize your case but also give you exact control of neck tension by utilising bushings. The dies use the same bushing as the dies
above. The decapping rod is adjustable to allow you to control only
the part of the neck that you desire. The decapping rod comes with
a sizing button and a decap pin like the Type S Neck dies. Dies are
supplied without bushing. Please refer to Advice Note on selecting the
correct bushing size.
REDDING BUSHING STYLE NECK DIE SETS
Competition Neck Die Set - This die set includes: Competition
Neck Sizing Die, Competition Bullet Seating Die and Body Sizing
die.
Type S Neck Die Set - This die set includes: Type S Bushing Neck
Die, Regular 92 Series Bullet Seater Die and Body Sizing Die.
For both sets, bushings are sold separately and must be ordered by
A
LO DI
individual item number.
S
N
SO
24
LU
REDDING NECK SIZING BUSHINGS
Redding Neck Sizing Bushing are available in .001” size increments
throughout the range of .185” thru .365”, covering calibres all from
.17 to .338. These are heat treated steel bushings but with the addition of a Titanium Nitride surface treatment to further increase the
effective surface hardness and reduce sizing friction. All bushings
are marked with size I.D.
REDDING NECK SIZING B
USHINGS
Item codes are RED76185 thru
RED76365.
(The last 3 digits denotes the bushing size).
RED76xxx . . Neck Bushing
REDDING BUSHING ST
ORAGE BOX
This handy bushing storage box is available to store
all your Redding bushing
and will also accept Wilson
bushings.
RED76999 . . . Storage Box
TO DETERMINE BUSHING SIZE
The easiest way to determine the proper diameter bushing, is to measure the neck
diameter of several loaded or dummy cartridges with an accurate micrometer.
Subtract .001” from the smallest average neck diameter and this diameter bushing
will generally size case necks to create the proper press fit for the bullet.
another method is to measure the neck thickness with a ball micrometer. Double
the neck wall thickness and add this number to the bullet diameter. The result is
the neck diameter of a loaded cartridge, and bushing size can be determined as
above.
NG
RE
REDDING BODY DIES
The Redding Body dies serve as a perfect companion to Redding
bushing style dies. The Body die is designed to full length resize the
case body only, bump the shoulder position for proper chambering,
but not to resize the neck at all. They do not have any internal parts
and are only intended to be used to resize cases that have become
difficult to chamber after repeated firings. After using the body die
the case should then be put through the neck sizer to achieve proper
neck tension. These dies are sold separately or part of a complete set.
Redding Competition Bushing Neck Die (left), Redding Competition
Bullet Seater (centre), Redding Type S Neck Die (right)
TIO
“The quality and accuracy of your reloaded ammunition depends largely on the
quality of the equipment you use to assemble it”.
REDDING FULL LENGTH DIES (FL)
The Redding Full Length Die size the full length of the cartridge. The die
includes a decapping rod assembly with a neck expander sizing button.
REDDING BULLET SEATERS
The standard Redding Bullet Seating Die includes a built in crimping ring
and proper seating plug. Seaters can be used with or without crimping.
REDDING NECK SIZING DIES (NK)
The Redding Neck Sizing Die sizes the neck portion of the cartridge only
and includes a decapping rod assembly with a neck expander sizing button.
REDDING FULL LENGTH DIE SET (FL)
The Redding FL Die Sets include the FL sizing die and the standard seating
die.
REDDING DELUXE DIE SETS
The Redding Deluxe Die Sets include the FL sizing die, standard bullet seating die and the neck sizing die.
FL Die Sets For Bottleneck Cases
Full Length die sets for bottleneck cases
contain two dies. The full length (FL) resizing
die contains a decapping rod assembly with a
neck expander (size button). The seating die
(ST) includes bullet guide, built-in crimping
ring and proper seating plug.
(ST)
Deluxe Die Sets For Bottleneck
Cases
Deluxe die sets for bottleneck
cases contain three dies. They
are a special packaging of the
Redding full length die sets
(described above) with the addition of a neck (NK) sizing die.
BODY DIES
These dies are
designed to
to full length
resize the case
body and bump
the shoulder
position for
proper chambering without
disturbing the
case neck. They are made without internal parts and intended for use only to
resize cases which have become increasingly difficult to chamber after repeated
firing and neck sizing.
RED75xxx . . . . . .Body Die
(Refer to chart for correct Prod #)
SMALL BASE BODY DIES
Small Base Body Dies are now available
in the following calibres for firearms
with custom chamberings that are
tighter than SAAMI specifications.
Note: For precise control of the amount
of shoulder bump use these dies the the
Redding Competition Shellholder Sets.
RED74111
RED74319
RED74317
RED74414
RED74531
RED74415
RED74141
RED74155
RED74148
Important Notice: Body dies are not
designed or intended to be used for
resizing loaded ammunition
SHELLHOLDERS
Redding shellholders are of a Universal
“snap-in” design recommended for use
with all Redding presses, as well as all
other popular brands. They are precision machined to very close tolerances
and heat treated to fit your cases perfectly and eliminate potential resizing
problems. The outside knurling makes
them easier to handle and change.
Order by number, refer to die reference
charts.
(Refer to chart for correct Prod #)
RED110xx . . . . . .Shellholder
EXTENDED SHELLHOLDERS
Redding extended shellholders are
required when trimming short cases
under 1-⁄” O.A.L. They are machined
to the same tight tolerances as Redding
standard shellholders except they’re
longer. For proper size, refer to die ref-
REDDING COMPETITION SHELLHOLDER SETS
Now you can control headspace. The new Competition
Shellholders are packaged in five piece sets in .002” increments (+.002”, +.004”, +.006, +.008 and +.010”). Each
shellholder has a distinct black oxide finish and is clearly
marked to indicate the amount it will decrease case-tochamber headspace.
(EXP)
(ST)
You can now easily adjust case-to-chamber headspace of your reloads with a simple shellholder
change.
RED11601 . . . . .Competition Shellholder Set, 243, 25-06, 308, 30-06
RED11602 . . . . .Competition Shellholder Set, 30-30
RED11604 . . . . .Competition Shellholder Set, 220 Swift
RED11606 . . . . .Competition Shellholder Set, most belted Mags
RED11610 . . . . .Competition Shellholder Set, 22 & 223 families
RED11612 . . . . .Competition Shellholder Set, PPC’s
SO
A
LO DI
25
LU
NG
RED11699 . . . . .Competition Shellholder Box, empty
S
(FL)
(ST)
N
(NK)
RE
(FL)
Die Sets For Straight Wall
Cases
Die sets for straight wall cases
contain three dies. This is necessary because it is not possible
to full length resize straight wall
cases and expand the neck for
proper bullet fit in one operation.
The full length sizing die (FL)
contains a decapping rod assembly. The expander (EXP) die contains a neck expanding plug. The
seating die (ST) includes a bullet
guide, built in crimping ring and
the proper seating plug.
NECK SIZING DIES
These dies size only the
neck portion of bottleneck
cases to prolong brass life
and improve accuracy. It is
important to note that since
these dies size only the neck
and not the shoulder or
body, fired cases should not
be interchanged between
rifles of the same calibre
223 Remington . . . . . . . . . .
6MM PPC. . . . . . . . . . . . . .
6MM BR Remington . . . . .
6MM/284 Winchester . . . . .
260 Remington . . . . . . . . . .
6.5MM/284 Winchester . . .
284 Winchester . . . . . . . . . .
308 Winchester . . . . . . . . . .
30-06 Springfield. . . . . . . . .
(FL)
REDDING
REDDING RELOADING DIES
Your choice of reloading dies should not be a casual one. Your dies literally
shape the quality and function of your reloads. Because they are so important Redding give them a lot of attention.
Redding use the finest alloy steels and machine their dies on SuperPrecision® lathes capable of holding the tightest tolerances in the industry.
Their dies are carefully heat treated in atmospherically controlled furnaces
and hand polished inside and out for smooth flawless functioning with a
final inspection before being ultrasonically cleaned and packaged.
Each die box is a handy cartridge loading block and storage package with
storage locations inside for a spare decapping pin and hex wrench (both
included) and even a place for your shell holder !
All dies have the industry standard 7/8-14 threaded bodies.
TIO
SERIES A & B Rifle Dies
REDDING
RELOADING DIE REFERENCE CHART
Cartridge
SERIES “A”
221 Rem Fireball
22 Hornet
220 Swift
222 Remington
22-250 Remington
223 Remington
243 Winchester
6MM Remington
25-06 Remington
257 Roberts
260 Remington
6.5MM x 55 Swedish
270 Winchester
7MM-08 Remington
7MM Remington Mag.
7MM x 57 Mauser
280 Rem (7MM Exp.)
7MM STW
7.62MM x 39
30-30 Winchester
30-06 Springfield
300 Winchester Mag.
300 Weatherby Mag.
308 Winchester/307 Win.
303 British
8MM x 57 Mauser
338 Winchester Mag.
35 Remington
375 H & H Magnum
Cartridge
Deluxe
Die Set
Neck Sizing
Die
Decap Rod
Assembly
Form &
Trim Die
Shell
Holder
RED80101
RED80102
RED80107
RED80109
RED80106
RED80111
RED80114
RED80115
RED80120
RED80125
RED80531
RED80132
RED80135
RED80139
RED80136
RED80138
RED80142
RED80544
RED80129
RED80146
RED80148
RED80153
RED80252
RED80155
RED80154
RED80159
RED80163
RED80165
RED80169
RED84101
RED84102
RED84107
RED84109
RED84106
RED84111
RED84114
RED84115
RED84120
RED84125
RED84531
RED84132
RED84135
RED84139
RED84136
RED84138
RED84142
RED84544
RED84129
RED84146
RED84148
RED84153
RED84252
RED84155
RED84154
RED84159
RED84163
RED84165
RED84169
RED81101
RED81102
RED81107
RED81109
RED81106
RED81111
RED81114
RED81115
RED81120
RED81125
RED81531
RED81132
RED81135
RED81139
RED81136
RED81138
RED81142
RED81544
RED81129
RED81146
RED81148
RED81153
RED81252
RED81155
RED81154
RED81159
RED81163
RED81165
RED81169
RED32223
RED32923
RED34223
RED32223
RED33223
RED33223
RED33242
RED34242
RED34256
RED34256
RED33263
RED34263
RED25276
RED23283
RED24283
RED24283
RED25283
RED25283
RED22307
RED23307
RED24307
RED25307
RED25307
RED23307
RED24310
RED24322
RED24336
RED23356
RED25373
RED83101
RED83102
RED83107
RED83109
RED83106
RED83111
RED83114
RED83115
RED83120
RED83125
RED83531
RED83132
RED83135
RED83139
RED83136
RED83138
RED83142
RED83544
RED83129
RED83146
RED83148
RED83153
RED83252
RED83155
RED83154
RED83159
RED83163
RED83165
RED83169
10
14
4
10
1
10
1
1
1
1
1
1
1
1
6
1
1
6
12
2
1
6
6
1
8
1
6
1
6
Full Length
Die Set
Deluxe
Die Set
Neck Sizing
Die
Decap Rod
Assembly
Form &
Trim Die
Shell
Holder
RED80217
RED80200
RED80362
RED80316
RED80318
RED80317
RED80319
RED80218
RED80122
RED80233
RED80322
RED80226
RED80127
RED80234
RED80241
RED80242
RED80230
RED80141
RED80237
RED80290
RED80147
RED80151
RED80150
RED80258
RED80288
RED80225
RED80256
RED80215
RED80266
RED80874
RED84217
RED84200
RED84362
RED84316
RED84318
RED84317
RED84319
RED84218
RED84122
RED84233
RED84322
RED84226
RED84127
RED84234
RED84241
RED84242
RED84230
RED84141
RED84237
N/A.
RED84147
RED84151
RED84151
RED84258
RED84288
N/A
RED84256
RED84215
RED84266
RED84874
RED81217
RED81200
RED81362
RED81316
RED81318
RED81317
RED81319
RED81218
RED81122
RED81233
RED81322
RED81226
RED81127
RED81234
RED81241
RED81242
RED81230
RED81141
RED81237
N/A
RED81147
RED81151
RED81150
RED81258
RED81288
N/A
RED81256
RED81215
RED81266
RED81874
RED31171
RED32923
RED32923
RED32223
RED32223
RED32242
RED32242T
RED32956
RED33256
RED32956
RED34256
RED35256
RED34263
RED25276
RED22283
RED23283T
RED23283
RED24283
RED25283
RED23307
RED24307
RED23307
RED25307
RED25307
RED25307
RED23320
RED25336
RED24356T
RED24356
RED25336
RED83217
RED83200
RED83362
RED83316
RED83318
RED83317
RED83319
RED83218
RED83122
RED83233
RED83322
RED83226
RED83127
RED83234
RED83241
RED83242
RED83230
RED83141
RED83237
N/A
RED83147
RED83151
RED83150
RED83258
RED83288
N/A
N/A
RED83215
RED83266
RED83874
10
3
14
1
12
1
12
3
1
12
1
6
6
6
1
10
2
1
6
15
8
1
6
6
6
2
6
1
6
6
A
LO DI
S
N
SO
26
LU
NG
RE
SERIES “B”
17 Remington
218 Bee
22K Hornet
22 B.R. Remington
22 PPC USA
6mm B.R. Rem
6mm P.P.C. USA
25-20 Winchester
250 Savage
256 Win Mag
257 Rob Imp. 40°
257 Wby Mag
264 Winchester Mag
270 Wby Mag
7mm B.R. Rem
7mm TCU
7-30 Waters
284-Winchester
7mm Wby. Mag
7.62mm Russian
30-40 Krag
300 Savage
300 H & H Magnum
308 Norma Mag
300 Remington Ultra Mag
32-40 Winchester
340 Wby Mag
35 Whelan
350 Rem Mag
338 Remington Ultra Mag
Full Length
Die Set
TIO
SERIES C & D Rifle Dies
Cartridge
Full Length
Die Set
Deluxe
Die Set
Neck Sizing
Die
Decap Rod
Assembly
Form &
Trim Die
Shell
Holder
SERIES “C”
219 Zipper
222 Remington Mag
225 Winchester
22-250 Imp 40o
22 Savage H.P.
6MM TCU
6mm/223 Rem
6mm/284 Win
240 Wby Mag
243 Winchester Imp 40
6.5mm/308 Winchester
6.5mm-06
280 Remington Imp 40
7MM x 64 Brenneke
7MM/300 Wby Mag
7.5MM Schmidt Rubin
30-06 Improved 40
30/338 Winchester Mag
30/378 Wby Mag
338/06
358 Norma Mag
416 Remington Mag
RED80360
RED80203
RED80239
RED80406
RED80338
RED80245
RED80312
RED80414
RED80232
RED80420
RED80578
RED80378
RED80428
RED80340
RED80384
RED80235
RED80324
RED80394
RED80547
RED80328
RED80210
RED80442
N/A
RED84203
RED84239
RED84406
RED84338
RED84245
RED84312
RED84414
RED84232
RED84420
RED84578
RED84378
RED84428
N/A
RED84384
RED84235
RED84324
RED84394
RED84547
RED84328
RED84210
RED84442
N/A
RED81203
RED81239
RED81406
N/A
RED81245
RED81312
RED81414
RED81232
RED81420
RED81578
RED81378
RED81428
N/A
RED81384
RED81235
RED81324
RED81394
RED81547
RED81328
RED81210
RED81442
RED33223
RED33223
RED33223
RED33223
RED33227
RED33242T
RED33242T
RED34242
RED34242
RED33242
RED33263
RED34263
RED25283
RED24283
RED25283
RED24307
RED24307
RED24307
RED25307
RED2433T
RED24356
RED25414
RED83360
RED83203
RED83239
RED83406
RED83338
RED83245
RED83312
RED83414
RED83232
RED83420
RED83578
RED83378
RED83428
RED83340
RED83384
RED83235
RED83324
RED83394
RED83547
RED83328
RED83210
RED83442
2
10
4
1
2
10
10
1
1
1
1
1
1
1
6
2
1
6
18
1
6
6
Cartridge
Full Length
Die Set
Deluxe
Die Set
Neck Sizing
Die
Decap Rod
Assembly
Form &
Trim Die
Shell
Holder
SERIES “D”
17 MACH IV
22 Remington Jet
219 Donaldson Wasp
223 Remington Imp 40
224 Weatherby Mag.
6MM Rem. Imp. 40°
250 Savage Imp. 40°
25/284 Winchester
25-06 Rem. Imp. 40°
6.5MM x 57 Mauser
6.5MM x 68S
6.5MM/284 Winchester
6.5MM Remington Mag.
6.5MM/300 Wby. Mag.
7MM-08 Rem. Imp. 40°
7MM x 57 Improved 40°
30-30 Imp 40°
8MM-06
8MM x 68S
338-06 Imp 40°
338-378 Weatherby Mag
35 Whelen Imp 40°
375 H & H Imp 40°
375 Weatherby Mag
378 Weatherby Mag
9.3MM x 62 Mauser
9.3MM x 74R
416 Weatherby Mag
460 Weatherby Mag
RED80504
RED80304
RED80403
RED80907
RED80212
RED80421
RED80416
RED80417
RED80422
RED80228
RED80447
RED80415
RED80231
RED80379
RED80430
RED80427
RED80431
RED80326
RED80344
RED80437
RED80527
RED80438
RED80440
RED80468
RED80469
RED80345
RED80346
RED80492
RED80480
RED84504
N/A
RED84403
RED84907
RED84212
RED84421
RED84416
RED84417
RED84422
RED84228
RED84447
RED84415
N/A
N/A
RED84430
RED84427
RED84431
RED84326
RED84344
RED84437
RED84527
RED84438
RED84440
N/A
RED84469
N/A
N/A
N/A
N/A
RED81504
N/A
RED81403
RED81907
RED81212
RED81421
RED81416
RED81417
RED81422
RED81228
RED81447
RED81415
N/A
N/A
RED81430
RED81427
RED81431
RED81326
RED81344
RED81437
RED81527
RED81438
RED81440
N/A
RED81469
N/A
N/A
N/A
N/A
RED26171
RED32221
RED33223
RED33223
RED33223
RED34242
RED33256
RED34256
RED34256
RED34263
RED35263
RED34263
RED34263
RED35263
RED23283
RED24283
RED23307
RED24322T
RED25322
RED24337T
RED25336
RED24356T
RED25373
RED25373
RED25373
RED24364
RED25364
RED25414
RED30456
RED83504
RED83304
RED83403
N/A
RED83212
RED83421
RED83416
RED83417
N/A
RED83228
N/A
RED83415
RED83231
RED83379
RED83430
RED83427
RED83431
RED83326
N/A
RED83437
RED83527
RED83438
N/A
N/A
N/A
RED83345
N/A
N/A
N/A
10
12
2
10
12
1
1
1
1
1
19
1
6
6
1
1
2
1
19
1
18
1
6
6
18
1
6
18
18
REDDING
S
27
LU
N
SO
A
LO DI
NG
RE
Any Redding items that are not kept in inventory may be Special Ordered.
TIO
REDDING
Bushing Style Dies
Cartridge
CATEGORY I
222 Remington
223 Remington
22-250 Rem
220 Swift
6mm PPC USA
6mm BR Rem
243 Winchester
6mm Rem
25-06 Rem
260 Remington
6.5x55 Swedish Mauser
270 Win
7mm-08 Rem
280 Remington
7mm Rem Mag
308 Winchester
30-06 Springfield
300 Win Mag
300 Wby Mag
300 Rem Ultra Mag
338 Win Mag
338 Rem Ultra Mag
Please note, all Redding Bushing style dies do not include any bushings, to
determine the correct size please follow instructions on Page 24
Type S
Neck
Bushing
Die
Type S
Full Length
Bushing
Die
Body
Die
Competition Competition Type S
Bushing
Seating Die Neck
Neck Die
Bushing
Die Set
Competition
Bushing
Neck Die
Set
Carbide
Kit for
Competition
Bushing Die
RED71109
RED71111
RED71106
RED71107
RED71319
RED71317
RED71114
RED71115
RED71120
RED71531
RED71132
RED71135
RED71139
RED71142
RED71136
RED71155
RED71148
RED71153
RED71252
RED71288
RED71163
RED71874
RED77109
RED77111
RED77106
RED77107
RED77319
RED77317
RED77114
RED77115
RED77120
RED77531
RED77132
RED77135
RED77139
RED77142
RED77136
RED77155
RED77148
RED77153
RED77252
RED77288
RED77163
RED77874
RED75109
RED75111
RED75106
RED75107
RED75319
RED75317
RED75114
RED75115
RED75120
RED75531
RED75132
RED75135
RED75139
RED75142
RED75136
RED75155
RED75148
RED75153
RED75252
RED75288
RED75163
RED75874
RED56109
RED56111
RED56106
RED56107
RED56319
RED56317
RED56114
RED56115
RED56120
RED56531
RED56132
RED56135
RED56139
RED56142
RED56136
RED56155
RED56148
RED56153
RED56242
N/A
N/A
N/A
RED55109
RED55111
RED55106
RED55107
RED55319
RED55317
RED55114
RED55115
RED55120
RED55531
RED55132
RED55135
RED55139
RED55142
RED55136
RED55155
RED55148
RED55153
RED55252
N/A
N/A
N/A
RED78109
RED78111
RED78106
RED78107
RED78319
RED78317
RED78114
RED78115
RED78120
RED78531
RED78132
RED78135
RED78139
RED78142
RED78136
RED78155
RED78148
RED78153
RED78252
RED78288
RED78163
RED78874
RED58109
RED58111
RED58106
RED58107
RED58319
RED58317
RED58114
RED58115
RED58120
RED58531
RED58132
RED58135
RED58139
RED58142
RED58136
RED58155
RED58148
RED58153
RED58252
N/A
N/A
N/A
RED98123
RED98123
RED98123
RED98123
RED98024
RED98024
RED98224
RED98224
RED98325
RED98226
RED98226
RED99427
RED99383
RED99483
RED99483
RED99307
RED99407
RED99407
RED99507
N/A
N/A
N/A
RED71217
RED71102
RED71101
RED71318
RED71316
RED71907
RED71406
RED71420
RED71421
RED71414
RED71122
RED71125
RED71322
RED71422
RED71415
RED71378
RED71127
RED71241
RED71230
RED71430
RED71138
RED71428
RED71141
RED71237
RED71544
RED71154
RED71394
RED71547
RED71323
RED77217
RED77102
RED77101
RED77318
RED77316
RED77907
RED77406
RED77420
RED77421
RED77414
RED77122
RED77125
RED77322
RED77422
RED77415
RED77378
RED77127
RED77241
RED77230
RED77430
RED77138
RED77428
RED77141
RED77237
RED77544
RED77154
RED77394
RED77547
RED77323
RED75217
RED75102
RED75101
RED75318
RED75316
RED75907
RED75406
RED75420
RED75421
RED75414
RED75122
RED75125
RED75322
RED75422
RED75415
N/A
RED75127
RED75241
RED75230
RED75430
RED75138
RED75428
RED75141
RED75237
RED75544
RED75154
RED75394
RED75547
RED75323
N/A
N/A
RED56101
RED56318
RED56316
RED56907
RED56406
RED56420
RED56421
RED56414
RED56122
RED56125
RED56322
RED56422
RED56415
N/A
RED56127
RED56241
N/A
N/A
N/A
RED56428
RED56141
N/A
RED56544
N/A
RED56394
N/A
N/A
RED55217
N/A
RED55101
RED55318
RED55316
RED55907
RED55406
RED55420
RED55421
RED55414
RED55122
RED55125
RED55322
RED55422
RED55415
RED55378
RED55127
RED55241
N/A
N/A
RED55138
RED55428
RED55141
N/A
RED55544
N/A
RED55394
N/A
N/A
RED78217
RED78102
RED78101
RED78318
RED78316
RED78907
RED78406
RED78420
RED78421
RED78414
RED78122
RED78125
RED78322
RED78422
RED78415
RED78378
RED78127
RED78241
RED78230
RED78430
RED78138
RED78428
RED78141
RED78237
RED78544
RED78154
RED78394
RED78547
RED78323
N/A
N/A
RED58101
RED58318
RED58316
RED58907
RED58406
RED58420
RED58421
RED58414
RED58122
RED58125
RED58322
RED58422
RED58415
N/A
RED58127
RED58241
N/A
N/A
N/A
RED58428
RED58141
N/A
RED58544
N/A
RED58394
N/A
N/A
N/A
CATEGORY II
17 Remington
22 Hornet
221 REM Fireball
22 PPC USA
22 BR Rem
223 Rem Imp 40
22-250 Rem Imp 40
243 Win Imp 40
6MM Rem Imp 40
6mm/284 Win
250 Savage
257 Roberts
257 Roberts Imp 40
25-06 Rem Imp 40
6.5MM/284 Win
6.5MM/06
264 Win Mag
7mm BR Rem
7-30 Waters
7mm-08 Imp 40
7mmx57 Mauser
280 Rem Imp 40
284 Winchester
7mm Wby Mag
7mm STW
303 British
30-338 Win Mag
30-378 Wby Mag
338/06
A
LO DI
S
N
SO
28
LU
NG
RE
Any Redding items that are not kept in inventory may be Special Ordered.
TIO
RED98023
RED98023
RED98023
RED98123
RED98123
RED98224
RED98224
RED98224
RED98125
RED98225
RED98225
RED98325
RED98226
N/A
RED98326
RED99183
N/A
N/A
N/A
RED99483
RED99383
N/A
RED99583
N/A
RED99407
N/A
N/A
Make inside neck sizing smoother and easier
without lubrication. Now you
can upgrade your die sets with a
carbide size button kit. Available for bottleneck cartridges 22 thru 338 cal. The carbide size
button is free floating on the decap rod allowing it
to self-centre in the case neck.
Kits contain: carbide size button, retainer and
spare decapping pin.
These kits will also fit all Type-S dies.
RED48223 . . . . . . . . .22 Cal Carbide Kit
RED48242 . . . . . . . . .243/6mm Carbide Kit
RED48263 . . . . . . . . .26/6.5mm Carbide Kit
RED49283 . . . . . . . . .28/7mm Carbide Kit
MODEL 3 POWDER MEASURE
This is the original Redding Model 3, time proven
for accuracy and reliability. It has a micrometer
chamber right in front for east setting and reading. With this micrometer it is possible to record
your favourite settings and return to the same
place weeks later when you wish to create the
same load.
The frame is precision machined cast iron to give
you years of service. Redding have yet to see one
wear out. The hand honed fit between the frame
and hard surface drum enables all Redding powder measures to easily cut and meter even most
difficult powders.
•
•
•
•
•
380 grain capacity
pour spout pan
simple two counterpoise system
1/10th grain over/under graduations
sensitive to less than 1/20th grain
REDDING
CARBIDE SIZE BUTTON
KITS
MODEL RS-1 POWDER & BULLET SCALE
Although Redding’s most inexpensive scale, it is
one of the most accurate scales on the market. To
be accurate, a scale must be sensitive enough to
react to each granule of powder dropped into the
pan. To maintain this high level of sensitivity the
scale beam inertia is kept low with a lightweight,
two counterpoise system.
RED01000 . . . . . . . . Model RS-1 Scale
The graduated plate at the beam pointer is
marked in 1/10th grain increments for easy reading of over and under charges. This eliminate the
need to move the counterpoises to check powder
charge variations.
MODEL No.2
MASTER POWDER &
BULLET SCALE
MODEL No. 5
POWDER TRICKLER
This scale is designed and manufactured to the
same accuracy and sensitivity standards as the
RS-1 scales but includes a magnetic dampened
beam swing for extra fast readings. The hardened
and ground knife edges ride in precision milled
stainless steel bearings seats that will not crack,
chip or lose their alignment in any way.
Turn the knob and you add powder to the scale
pan a granule or two at a time. Brings under
weight charges up to accurate readings fast. Solid,
stable, low centre of gravity.
•
•
•
•
•
RED05000 . . . . . . . . Powder Trickler
505 grain capacity
1/10th grain accuracy
pour spout pan
simple two counterpoise system
1/10th grain over/under graduations
Weighs a full pound so it won’t squirm all over
your bench while you are trying to use it. Ideal
height for most powder scales.
RED02000 . . . . . . . . Model No.2 Scale
BENCH STAND
For convenient bench-top mounting of Redding
Powder Measures. Will fit all other Powder
Measures with 7/8-14 thread mounting. This
bench stand is not threaded; it is secured with a
lock ring which enables you to rotate the measure
to any desired position and permits quick dump
of the reservoir.
RED06000 . . . . . . . . Bench Stand
STUCK CASE REMOVAL KIT
Sooner or later everyone does it. Too little case
lubricant and the case seizes in the resizing die.
Usually, the rim pulls off and it is almost impossible to remove the stuck case without damaging
the die. This case removal kit provides an easy
solution to your problems. Instructions included.
RED22000 . . . . .Stuck Case Removal Kit
RED99175 . . . . .Ball Handle
SO
A
LO DI
29
LU
NG
RED30520 . . . . . . . . Double C Clamp
S
DOUBLE “C” CLAMP
The double “C” clamp is ideal for clamping the
Redding powder measure stand to a bench top. It
will accommodate a bench thickness of 2-1/4”
N
Includes Universal Metering Chamber, Charging
range approx. 5 to 100 grains.
RE
RED03000 . . . . . . . . Model 3 Powder Measure
BALL HANDLE CONVERSION
Convenient, easy-to-attach conversion for those
who prefer a ball handle on their reloading press.
Fits the Redding BOSS as well as other reloading
presses that use a 5/8” handle diameter. Easily
attaches without machining or threading.
TIO
RCBS
PRESSES &
RELOADING KITS
RCBS ROCK CHUCKER PRESS
With its easy operation, outstanding strength and
versatility, a Rock Chucker press is ideal for beginner
and pro alike. It can be upgraded to a progressive
press with an optional Piggyback II conversion.
• Heavy-duty cast iron construction for easy
case-resizing
• 1” ram held in place by 12.5 sq. in of ram bear
ing surface
• Toggle blocks of ductile iron
• Compound leverage system
• Pins ground from hardened steel
• 1.25” x 12 thread for shotshell dies
• 7/8”x14 thread adapter for standard dies and
accs.
• Milled slot and set screws accept optional
RCBS auto primer feed
RCBS09366 . . . . . . . Rock Chucker Press
RCBS86881 . . . . . . . Dust Cover
RCBS09114 . . . . . . . Primer Catcher RS, RC
RCBS09550 . . . . . . . Universal Priming Arm
RCBS09552 . . . . . . . Primer Plug Sleeve - Large
RCBS09553 . . . . . . . Primer Plug Sleeve - Small
RCBS09580 . . . . . . . Automatic Primer Feed Combo
RCBS09581 . . . . . . . Auto Primer Feed - Large
RCBS09582 . . . . . . . Auto Primer Feed - Small
RCBS ROCK CHUCKER MASTER
RELOADING KIT
A simple, complete solution for beginner and
expert alike, it’s easily upgraded to a progressive
system. The kit includes: Rock Chucker Press, 5-0-5
Reloading Scale, Uniflow Powder Measure, Speer
Manual #13, Trim Pro Manual Case Trimmer Kit,
Hex Key Set, Case Loading Block, Case Lube Kit,
Automatic Primer Feed, Primer Tray-2, Powder
Funnel, and Deburring Tool.
RCBS09367 . . . . . . . Rock Chucker Reloading Kit
RCBS RELOADING STARTER KIT
This is one of the truly
remarkable values
in reloading. It has
everything you need
to get started reloading rifle (except dies
and shell holder), and
is easily upgraded to
a progressive system.
The RCBS Reloading
Starter Kit includes:
Reloader Special-5
Press, 5-0-5 Scale,
Case Lube Kit, Case
loading block, Primer
Tray-2, Powder Funnel,
Deburring Tool and
RCBS RELOADER SPECIAL-5 PRESS
The latest in the popular line of Reloader
Special presses. Featuring a more comfortable
ball handle and a primer arms that lets you
prime cases at the same time you resize.
• Solid aluminium block “O” frame, off
set for unobstructed access
• Corrosion-resistant baked powder finish
• Spent primers eject into catcher
• May be upgraded to progressive
• Accepts shotshell dies and 7/8”x14 dies
via supplied adapter
RCBS09285 . . . . . . . Reloader Special-5 Press
RCBS86881 . . . . . . . Dust Cover
Speer Reloading Manual.
RCBS09045 . . . . . . . Reloading Starter Kit
RCBS PARTNER PRESS
Just starting out? The partner is easy
to use and incredibly durable. The
least expensive press with the RCBS
range offers big performance in a
compact package. It’s also perfect as
a second press for different operations or smaller calibres.
• Durable steel links
• Priming arms eliminates need for
separate priming tool
• Reloads most standard calibres
• Compact size, perfect for range use
RCBS87466 . . . . . . . Partner Standard Kit
A
LO DI
S
N
SO
30
LU
The Partner Press anchors
this excellent starter kit. Big
on performance, small on
price, the Partner is the ideal
entry-level press. Here it is
coupled with some of the
finest “basic” reloading tools
you’ll find.
The RCBS Partner Standard
Kit includes: Partner Press,
RC-130 Scale, Case Loading
Block, Case Slick, Primer
Tray-2, Deburring Tool,
Powder Funnel and Speer
Reloading Manual.
NG
RE
RCBS87460 . . . . . . . Partner Press
RCBS86881 . . . . . . . Dust Cover
RCBS PARTNER
STANDARD KIT
TIO
PRESSES
The Turret handle is also used to remove the turret head, eliminating the
need for other tools. The turret head exchanges easily with the removal of
one bolt.
• Durable cast iron construction
• Positive Alignment
• Six-Station Turret Head
• Accepts all 7/8-14” threaded dies & standard shell holders
• Reliable tube feed priming system
• Simple operation, no complex or automated processes. You
plete control over every step of the process
have com
RCBS88901 . . . . . . . . . . RCBS Turret Press
RCBS88902 . . . . . . . . . . RCBS Turret Head
RCBS AMMOMASTER®
In single-stage mode, you have all the clearance and leverage to handle any
rifle or pistol round from 25 Auto to 50 BMG.
The AmmoMaster as shipped from the factory is designed for use with standard 7/8-14 thread reloading dies and accessories.
• Easily converts from single-stage to .50 BMG with .50
BMG Kit
• Accepts all 7/8-14” threaded dies & standard shell holders
Ram Priming Unit
Features and Benefits
• Strong cast iron frame,
links and toggle back
• Compound Leverage
allows
effortless full-length sizing
• Manual indexing
• Removable die plate
• Five reloading stations
allows separate use of lube
die, and a Powder
Checker, or LockOut Die,
or you can seat and crimp
bullets separately
• Fastest and simplest cali
bre conversion of any
Progressive Press on the
market
• Best powder dispensing
method available
• Utilizes APS® Priming
System, the most reliable,
convenient and safest
available
• Optional tube priming is
available
• Primer catcher completely
eliminates spilled primers
on the floor
• Larger working window
for greater visibility and
easy access to all stations
• Simple Universal Case
Retention System allows
easy removal and insertion
of cases at each station
• Self-cleaning Shell Plate
Holder
• Includes Bullet, loaded car
tridge box and empty case
box.
• No special dies required standard ⁄”-14 thread
RCBS PRO 2000™ PROGRESSIVE PRESS
The Pro 2000 is an easy-to-use progressive press.
It offers simple to use five-station manual indexing. It’s like having an ammo factory right on
your bench; each pull of the handle produces
a perfectly loaded round. All you have to do is
insert the bullet and case and rotate the shell
plate by hand – perfect for short pistol to very
long rifle cases. It’s built to last.
RCBS88875 . . . . . Pro 2000 Progressive Press
RCBS88878 . . . . . Pro 200 Star Wheel
RCBS88876 . . . . . Tube Priming Conversion Kit
RCBS88879 . . . . . Low Primer Detector
RCBS86767 . . . . . Dust Cover
Pro 2000 Piggyback® III Die Plate
Make calibre changes quickly and easily. Leave
the reloading dies set up. Eliminates the need to
install and adjust dies for each reloading session.
RCBS88877 . . . . . Pro 2000/Piggyback III Die
Plate
Pro 2000 5-Station Shell Plates
Specify Cartridge when ordering
RCBS888(xx) . . . 5-Station Shell Plate
SO
A
LO DI
31
LU
NG
RE
RCBS88701 . . . . . . . . . . AmmoMaster Single Stage Press
• Includes
The RCBS Pro 2000
Progressive Press
S
The new RCBS Turret Press now gives you a choice between single stage or
progressive reloading.
With dies pre-set in the turret, you can increase your output from 50 to 200
rounds per hour with the turret. Dies can be left in the turret to eliminate
teardown and set up.
RCBS Ammomaster Press
N
RCBS TURRET PRESS
RCBS
Check it Out !
The new RCBS Turret Press . . .
TIO
RCBS
CASE PREPARATION
POW’R PULL™ BULLET PULLER
RELOADING ACCESSORY KIT
This package makes reloading even easier with
some nice tools. The Reloading Accessory Kit
includes: Powder Measure/Piggyback stand,
powder trickler, primer pocket brush combo, case
loading block, stainless steel dial caliper, small
and medium case neck brushes.
RCBS98925 . . . .Reloading Accessory Kit
This indestructible tool is the easy way to fix
mistakes. An improved 3-jaw chuck firmly grips
the case rim; just rap it on a solid surface like a
hammer. Powder and bullet drop into the main
chamber for re-use. A soft cushion prevents any
damage to the bullet. A solid one-piece body adds
extra strength and a generous handle size adds
user comfort. Works with most centrefire cartridges from 22 thru 45.
RCBS09415 . . . .Pow’r Pull Bullet Puller
Not for use with rimfire cartridges
PRIMER POCKET
BRUSH COMBO
A build-up of
residue in primer
pockets can cause misfires. A couple of twists
with the RCBS Primer
Pocket Brush and residue is easily cleaned out.
Brushes have stainless steel bristles and interchangeable mounts for large and small primer
pockets. Comes with a no-roll accessory handle
RCBS09574 Primer Pocket Brush Combo
Replacement Parts
RCBS09578 . . . .Small Brush
RCBS09577 . . . .Large Brush
RCBS09330 . . . .Accessory Handle
ELECTRONIC DIGITAL CALIPER
STANDARD BULLET
PULLER
CASEMASTER™ GAUGING TOOL
A quick, convenient way to determine several
important case and cartridge dimensions. The
CaseMaster gauging tool measures case neck
concentricity, case neck thickness, case length and
bullet run-out. All are important to accuracy and
safety. Detects case head separation before symptoms are apparent on the outside of case. Much
quicker than a dial caliper and makes a tedious
job simple and less tiring. Optional 22 Rimfire
Gauge Accessory available for the serious rimfire
shooters.
RCBS87310 . . . .CaseMaster Gauging Tool
RCBS87312 . . . .22 Rimfire Rim Gauge Acc
UNIVERSAL
DECAP DIE
Use the RCBS Universal
Decapping Die to quickly remove
primers from cases prior to cleaning.
A single die handles calibres from 22 thru 45.
Plastic storage box is included.
A
LO DI
S
N
SO
32
LU
RCBS09440 Standard
Bullet Puller
Standard Bullet Puller
Collets
RCBS09419 . . . . .
RCBS09420 . . . . .
RCBS09421 . . . . .
RCBS09422 . . . . .
RCBS09423 . . . . .
RCBS09424 . . . . .
RCBS09425 . . . . .
RCBS09426 . . . . .
RCBS09427 . . . . .
RCBS09428 . . . . .
RCBS09437 . . . . .
RCBS09431 . . . . .
RCBS09434 . . . . .
RCBS09436 . . . . .
.17
.22
6mm
.25
6.5mm
.270
7mm
.30/7.35
.338
.32/8mm
9.3mm
.375
.416
.45
RCBS87323 . . .Electronic Digital Caliper
ELECTRONIC DIGITAL MICROMETER
CASE LUBE KIT
Properly clean and lube
cases for resizing the
simple way with
this complete kit.
Includes: Case Lube
Pad, 2-ounce bottle
of Case Lube-2, and
Accessory Handle with two interchangeable Case
Neck Brushes for 22 thru 30 calibres.
RCBS09335 . . . .Case Lube Kit
CASE LUBE PAD
The best way to lubricate cases for resizing or
forming. Coat the pad with Case Lube-2, then
roll the case lightly across it. Exactly the right
amount of lubricant is transferred to the case.
Pad is removable from sealable storage case for
easy cleaning.
RCBS09307 . . . .Case Lube Pad
CASE LUBE-2
An excellent lubricant that’s water soluble and
convenient to wipe off easily with no sticky residue. Non-Toxic, Use Case Lube-2 with RCBS
Case Lube Pad.
RCBS09311 . . . .Case Lube-2
Top of the line enamel body with matte finish, non-glare thimble. Outside micrometer
has 0 to 1”/0 to 25mm range. Counter reads to
0.0005”. Resolution 0.0005”/0.001mm. Accuracy
0.0005”/0.001mm. Large easy to read numbers
for error reduction with instant inch/millimetre
conversion. Zero adjust at any position. Thimble
lock for measuring like objects. Replaceable silver
oxide cell – 1.55 volt, type SR44W included. Auto
off after 5 minutes for longer battery life. Fitted
wooden storage case.
RCBS87320 . . .Electronic Digital Micrometer
CASE NECK BRUSHES
Clean dirt and powder residue from inside necks
and simultaneously lubricate for expansion with
the RCBS case neck brushes. The no-roll handle
design accepts all three nylon bristle brushes:
small brush for 22 thru 25 cal. medium brush for
270 thru 30 cal., large brush for 35 cal. thru 45
cal.
RCBS09327 Small
RCBS09328 Medium
RCBS09329 Large
NG
RE
RCBS87580 . . . .Universal Decapping Die
The RCBS Standard
Bullet Puller is designed
to easily pull and not
damage jacketed bullets.
It utilizes the standard
7/8”x14 thread and may
be used in any single
stage reloadingpress
having this thread.
Not for rimfire cartridges.
Instant Reading. Very easy to use. Hardened
stainless steel body for prolonged tool life.
Switches from inches to millimetres with the
touch of a button. Range of 0-6”/0-150mm.
Accuracy +/0.001”/0.02mm/ Resolution:
0.0005”/0.01mm. Measures internal, external,
depth and step dimensions. Replaceable silver
oxide cell – 1.55 volt, type SR44W included. Low
battery indicator.Fitted plastic storage case.
TIO
CASE TRIMMING
RCBS90376 . . . .Trim Mate Case Prep Centre 240v ac
RCBS90377 . . . .Dry Case Neck Lube
RCBS90378 . . . .Primer Pocket Uniformer, lge
RCBS90379 . . . .Primer Pocket Uniformer, sml
RCBS90380 . . . .Military Crimp Remover, lge
RCBS90381 . . . .Military Crimp Remover, sml
RCBS90382 . . . .Dust Cover
Case trimming
TRIM PRO® MANUAL
is no longer
CASE TRIMMER KIT
a drudgery.
Trim cases simply, with a few turns
of the handle. The Trim
Pro’s spring-loaded lever
shell holder eliminates the
muscle fatigue associated
with long hours of tightening a T-bar. The Shell Holder
keeps cases securely locked in place and
aligned with the cutter. It is designed for .001”
accuracy even with a spent primer in the case. Works with standard
pilots and features a micrometer fine-adjustment bushing calibrated
for setting exact trim length. Made of die cast metal with hardened
cutting blades for a lifetime of reliable use.Includes: Shell Holders
2, 3, 4 and 10. Pilot calibres: 22, 24, 25, 27, 28, 30, 35, 44 and 45.
RCBS90355 . . . .Trim Pro Manual Case Trimmer Kit
TRIM PRO®
3-WAY CUTTER
TRIM PRO® CASE
HOLDER ACCESSORY
Upgrade your Rotary Case Trimmer-2 simply
by adding this lever-handle shell holder system.
Makes case trimming faster and easier than using
the old draw collet system. It’s also more accurate
because the case is perfectly aligned. Uses Trim
Pro Shell Holders.
TRIM PRO®
CASE TRIMMER STAND
Raise your manual case trimmer to new heights
with the Trim Pro stand. Provides more working
room and hand clearance. Also provides convenient storage space for Trim Pro shell holders
and pilots. Stand mounts easily on accessory base
plate or directly on a bench. Dimensions: 4-⁄” x
8-⁄” x 1”. Manual trimmers only.
Shell Holders and Pilots sold separately
RCBS90360 . . . .Trim Pro Case Trimmer Stand
RCBS
TRIM MATE™ CASE PREP CENTRE
Case preparation just became five times easier and faster with
the Trim Mate Case Prep Centre, Five gear-driven rotating
heads turn the tedious task of chamfering, deburring, primer
pocket cleaning, military crimp removal and flash hole
deburring into child’s play. The tough, high-torque motor
does all the work, allowing you quick case movement from
station to station.There are also two stationary positions
for case neck brushes or other useful accessories and a
cupped area for holding dry case neck lube. The
Trim Mate Case Prep Centre includes large
and small primer pocket brushes, inside chamfering and outside deburring tools, medium
and small case neck brushes and a packet of
dry case neck lube. There are also a number
of optional accessories available. Primer pocket
uniformers are manufactured with carbide cutters
and true the primer pocket wall and bottom.
RCBS90358 . . . .Trim Pro Case Holder
Not for use with Rotary Case Trimmer
CASE TRIMMER
PILOTS
This is automated case preparation at its finest.
The RCBS 3-Way Cutter is one of those accessories you can’t live without. Its unique three blade
head configuration trims cases like the RCBS
standard cutting tool, but in addition to trimming
to length, inside blades chamfer the case while an
outside blade deburrs it. The 3-Way cutter attaches easily to both Case Trimmers and Trim Pros.
Trim Pro 3-Way Cutters
(include cutter & pilot)
Designed with a taper to guide pilot into the case
mouth. Prevents case from wobbling when trimming case to length. For use with RCBS Trim
Pro® Case Trimmer, Rotary Case Trimmer-2 and
Rotary Case Trimmer.
RCBS90278 . . . 22 Cal.
RCBS90279 . . . 6mm
RCBS90280 . . . 25 Cal.
RCBS90281 . . . 6.5mm
RCBS90282. . . 270 Cal.
RCBS90283. . . 7mm
RCBS90284. . . 30 Cal.
For use with RCBS case Trimmers only.
Case Trimmer Pilots.
RCBS09386. . . 32 Cal.
RCBS09387. . . 33 Cal.
RCBS09388. . . 34 Cal.
RCBS09389. . . 35 Cal.
RCBS09390. . . 36 Cal.
RCBS09391. . . 37 Cal.
RCBS09397. . . 416 Cal.
RCBS09395. . . 45 Cal.
RCBS09398. . . 475 Cal.
Two tools for fast, easy removal of excessive neck thickness or variation in case thickness. They guide
the cutter over the sized cartridge case neck and are supported by a special pilot/reamer. The inside and
outside of the neck are turned simultaneously. The Auto Feed Attachment (for Case Trimmer-2 and
Trim Pro Manual Case Trimmer) advances the cutting tool evenly over the case neck with each turn of
the trimmer handle.
Pilot/Neck Reamers
Not for use with Trim Pro Power Case Trimmer
RCBS98860 . . . .Case Neck Turner w/Auto Feed
17 Cal.
223 Cal.
243 Cal.
25 Cal.
6.5mm
270 Cal.
RCBS98883
RCBS98884
RCBS98886
RCBS98887
RCBS98889
RCBS98891
7mm
30 Cal.
8mm
338 Cal.
35 Cal.
375 Cal.
RCBS90320
RCBS90321
RCBS90323
RCBS90324
RCBS90325
RCBS90326
RCBS90327
RCBS90328
RCBS90330
RCBS90332
RCBS90333
RCBS90334
RCBS90335
RCBS90336
RCBS90337
RCBS90338
RCBS90339
RCBS90340
RCBS90341
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
#20
#21
#23
#24
#25
#26
#27
#28
#30
#32
#33
#34
#35
#36
#37
#38
#39
#40
#41
SO
A
LO DI
33
LU
NG
RE
RCBS98861 . . . .Case Neck Turner
RCBS98877
RCBS98878
RCBS98879
RCBS98880
RCBS98881
RCBS98882
TRIM PRO
SHELL HOLDERS
RCBS90301. . . #1
RCBS90302. . . #2
RCBS90303. . . #3
RCBS90304. . . #4
RCBS90305. . . #5
RCBS90306. . . #6
RCBS90307. . . #7
RCBS90308. . . #8
RCBS90309. . . #9
RCBS90310. . . #10
RCBS90311. . . #11
RCBS90312. . . #12
RCBS90313. . . #13
RCBS90314. . . #14
RCBS90315. . . #15
RCBS90316. . . #16
RCBS90317. . . #17
RCBS90318. . . #18
RCBS90319. . . #19
S
RCBS09377 . . . 17 Cal.
RCBS09378 . . . 22 Cal.
RCBS09379 . . . 24 Cal.
RCBS09380 . . . 25 Cal.
RCBS09381 . . . 26 Cal.
RCBS09382 . . . 27 Cal.
RCBS09383 . . . 28 Cal.
RCBS09384 . . . 30 Cal.
RCBS09385 . . . 31 Cal.
N
CASE NECK TURNING
ACCESSORIES
TIO
RCBS
PRIMING TOOLS
APS®
BENCH-MOUNTED PRIMING TOOL
The APS Bench-Mounted Priming Tool was
created for those reloaders who prefer to have
a separate, specialised tool dedicated just to priming.
It’s a tool with exceptional feel for concise and consistent
seating of primers. The handle on the bench-mounted
tool is large by design to provide hours of comfortable
loading. Handle position is adjustable for bench height
or personal preference.
APS®
HAND
PRIMING
TOOL
Who hasn’t dumped a load of primers onto a tray
only to have half the box scatter all over the floor ?
Trying to figure out if those primers left in the tube
were standard or magnum can also be a headache.
Now you can eliminate those priming headaches ....
It’s fast and simple. The new APS Hand Priming
Tool is simply revolutionary ! First, the Universal
Shell Holder completely eliminates the need for
additional shell holders, accepting cases from .32
ACP to 45-70. Secondly, each strip is colour- coded
for easy identification and holds up to 25 primers.
The primer strips are even designed to connect to
each other for continuous feed. Now, there’s no
need to handle loose primers or worry about contamination.
The APS Hand Priming Tool is also completely
portable. You’re no longer tied down to your bench
to prime. Hand priming has never been easier, safer,
or more convenient.
RCBS88501 . . . .APS Bench-Mounted Priming Tool
APS® PRESS-MOUNTED PRIMING TOOL
For those of you who have limited bench space, or prefer priming
cases on a press, RCBS gave designed the APS press-mounted priming tool just for you. It provides the same features as the APS benchmounted tool except it attaches to any single stage press that accepts
standard ⁄”x14 dies.
RCBS88503 . . . . . . . . . . APS Press-Mounted Priming Tool
PRIMER TRAY-2
The Primer Tray-2 handles today’s larger primer
package quantities. The square shape makes it
easier to handle. Grooved tray surface quickly
positions primers anvil-side up.
RCBS09480 . . . .Primer Tray-2
RCBS88507 . . . . . . . APS Hand Priming Tool
APS® PRIMER STRIP LOADER
For those
t o
of you who may already have a supply of primers in conventional
packaging, not to worry ... The APS Primer Strip Loader
allows you to quickly fill empty primer strips. It’s simple
use and even faster than loading a primer tube !
Each push of the handle safely inserts 25 primers into an APS strip for use with the RCBS APS
Priming System.
RCBS88505 . . . . APS Strip Loader
CASE LOADING BLOCKS
A solid, steady platform that holds 40 cases at a time to
streamline powder charging and inspection. Stepped holes
minimise case tipping to reduce powder spillage. For most rifle
cases. Approx 4-⁄” x 7-⁄”
RCBS09453 . . . .Case Loading Block
APS® PRIMER STRIPS
APS® Primer Strips
These strips are colour coded for fool proof identification. Each strip holds 25 primers. Strips can
be loaded with the primer of your choice using
the strip loader. Primers not included.
S
N
SO
34
Yellow
Yellow
Blue
Blue
Black
Black
RCBS90200
Hand Priming Tool
8 Strips per pack
A
LO DI
LU
APS Strip, Lg. Rifle
APS Strip, Sm. Rifle
APS Strip, Mag Lg. Rifle
APS Strip, Mag sm. Rifle
APS Strip, BR2 Lg. Rifle
APS Strip, BR4 sm. Rifle
The RCBS Hand Priming Tool not only seats primers
quickly, it’s also the safest. A patented safety mechanism separates the seating operation from the primer supply, virtually eliminating the possibility of tray detonation. Fits in your
hand for portable primer seating. Primer tray installation requires no
contact with the primers. Uses the same shell holders as RCBS presses.
Made of durable cast metal. Includes large and small primer plugs and
sleeves.
NG
RE
RCBS88510
RCBS88512
RCBS88514
RCBS88516
RCBS88518
RCBS88519
HAND PRIMING TOOL
TIO
POWDER & BULLET
SCALES
5-0-2 SCALE
10-10 SCALE
1
2
3
A legendary standard in mechanical scales.
The 5-0-5 features the RCBS magnetic
dampening system plus large black-on-white
graduations for fast recognition. Its three-poise
beam is graduated in ten, one and 0.1 grain increments to achieve +/-.1 accuracy. A tip-proof
aluminium pan keeps powder from sticking or
spilling. Hardened knife blades ride on agate
bearings for long life and sensitivity. There’s even
ounce-to-grain conversion on the base for shotshell reloaders.
Big scale features and capacity with an
affordable price. Two-poise design lets you
weigh up to 505 grains with 0.1 grain accuracy. The 5-0-2 also sports the RCBS magnetic
dampening for fast reading, maintenance-free
movement and a rugged die cast metal base. Tipproof aluminium pan for loading convenience.
Ounce-to-grain conversion table on the base for
handy shotshell reference.
RCBS09071 . . . . . . . 5-0-5 Scale
RCBS09067 . . . . . . . 5-0-5 Scale, Metric
RCBS09075 . . . . . . . Dust Cover
RCBS09069 . . . . . . . 5-0-2 Scale
RCBS09075 . . . . . . . Dust Cover
Need up to 1,010 grain capacity* with 0.1
grain sensitivity ? You get it with the RCBS
10-10. Its approach-to-weight system speeds
reloading and helps you avoid over loads. A
micrometer poise allows easy adjustment at any
setting from 0.1 to 10 grains. Other features: magnetic dampening, non-stick/non-spill aluminium
pan, self aligning agate bearings, hardened steel
pivot knives and a tough plastic cover.
*With included attachment weight
RCBS09073 . . . . . . . 10-10 Scale
3
2
1
RCBS
5-0-5 SCALE
4
RC-130™ MECHANICAL SCALE
4
The RC-130 low cost scale has many of the
same quality features that you find in other
RCBS scales. A precision-machined aluminium
beam means that weight increments are accurate
and repeatable. Beam poises are metal plates and
are designed to be easy to adjust and to stay put
after you set them.
The critical beam pivots are steel-on-steel, not
steel-on-aluminium like another company uses.
The pivot bearings are cylindrical for the smallest
possible contact area —ensuring better accuracy.
The RC-130 weighs 130 grains with an accuracy
of +-0.1 grains. The sturdy base and easy-to-read
index card are moulded from tough ABS polymer.
The non-static powder pan with integral hanger
allows easy transfer of powder to the cartridge
case.
RCBS90400 . . . . . . . RC-130 Mechanical Scale
POWDER FUNNEL
RCBS have even managed to improve upon the
basic plastic funnel. Theirs features a specially
designed drop tube to avoid any messy powder
spills around case mouths, a non stick, anti-static
surface, plus a square lip to keep the funnel from
rolling around.
POWDER TRICKLER
RCBS09087 . . . . . . . Powder Funnel 22-45 cal
RCBS09086 . . . . . . . Powder Funnel 17 cal
Here’s the fast way to feed powder to your scale.
Turn the small knob and powder trickles into the
pan one kernel at a time. Large-capacity reservoir,
extra wide base for stability, and a perfect height
for all powder scales.
SCALE CHECK WEIGHTS
RCBS09094 . . . . . . . Powder Trickler
You rely on your scale for safe, accurate powder charges. Overtime, accumulated grit and dust can affect
accuracy. A quick test with RCBS Scale Check Weights will tell you if your scale is reading correctly.
Sets include:
Standard set of 60.5 grains for powder charges (2x20, 1x10, 1x5, 2x2, 1x1, 1x0.5)
Deluxe set of 510.5 grains for bullets, cases and powder (1x200, 2x100, 1x50, 2x20, 1x10, 1x5, 2x2, 1x1,
1x0.5, 1 forceps).
Standard Scale Check Weights
Deluxe Scale Check Weights
Scale Pan (5-0-2, 5-0-5 & 10-10 scales)
Scale Pan Support (5-0-2, 5-0-5 & 10-10 scales)
S
35
LU
N
SO
A
LO DI
NG
RE
RCBS98990 . . . . . . . . . .
RCBS98992 . . . . . . . . . .
RCBS09078 . . . . . . . . . .
RCBS09079 . . . . . . . . . .
TIO
RCBS
POWDER HANDLING
& EXTRAS
MICROMETER ADJUSTMENT SCREW
FOR UNIFLOW POWDER MEASURE
UNIFLOW™ POWDER MEASURE
The number one choice of reloaders the world
over, the RCBS Uniflow Powder Measure has
an adjustable cylinder. Iron and Steel construction insure long life and accuracy. You can throw
charges upto 110 grains of 4350.
The secret to faster
reloading — go by
the numbers. Add
the UPM Micrometer
to your Uniflow
Powder Measure, and
you can record precise settings for your powder charges.
Determine the load number and
dial it in — time after time. An easy
installation too; it simply replaces the
Uniflow’s standard metering screw.
RCBS09010 . . . . . . . Uniflow Powder Measure
RCBS86880 . . . . . . . Dust Cover
RCBS09028 . . . . . . . Drop Tube 17 Cal.
RCBS98911 . . . . . . . Case Actuated Linkage Kit
POWDER MEASURE STAND
This stand will raise any powder measure (with
standard ⁄”x14 thread) leaving plenty of space
for positioning a powder scale pan or cases in a
loading block under the drop tube. Bolts easily to
a reloading bench or table.
UPM Micrometer Adjustment Screw
RCBS98901 . . . . . . . . . . Large
RCBS09035 . . . . . . . Powder Measure Stand
Ram Priming Unit
POWDER BAFFLE
The positive Ram
Priming Unit gives you
better “feel” by seating
the primer at the top of
the press stroke. You can
also pre-set a positive stop
to speed up your loading
process. Works with any press
with ⁄-14” thread and RCBStype, removable Shell Holder.
Includes primer rod assemblies for all
rifle and pistol Boxer-type primers.
Uniform loads require
consistent powder charges and many handloaders
find a baffle helps them
throw more consistent
charges. The baffle is specifically designed for the
Uniflow Powder Measure
and provides handloaders a uniform powder
flow by controlling the
gravity feed pressure of
the powder column on the metering unit.
RCBS09165 . . . . . . . Ram Priming Unit
PREMIUM
TRIGGER PULL SCALE
Measure the force needed for
trigger release of firearms. Scale is
accurate to +/- 2 ounces in 2 ounce increments to 8 pounds. A sliding indicator
remains at the highest reading when the
trigger releases, allowing accurate measurements.
RCBS87307 . . . . . . . Premium Trigger Pull Scale
ACCESSORY BASE
PLATE-2
RCBS90225 . . . . . . . Powder Baffle
DIE LOCK-RING
WRENCH
DEBURRING TOOL
No more bashed knuckles or fumbling with
adjustable wrenches. The RCBS Die Lock-Ring
Wrench simply slips onto the die lock ring for
quick and easy adjustment. A pivoting handle
allows leverage from any angle and the heat
treated steel stands up to all the brute force you
can muster.
Prep cases fast, insert the pointed end to remove
burrs and bevel inside the case. Fit the open end
over the case mouth to remove exterior burrs.
Hardened cutting flutes stay sharp for years.
Knurled for hand or lathe use. Cases from 17 to
45 calibre.
RCBS09634 . . . . . . . Die Lock-Ring Wrench
RCBS09349 . . . . . . . Deburring Tool
Flash Hole Deburring Tool
Burrs left on the inside of the flash hole during
manufacturing can cause erratic ignition. This handy
tool
automatically locates the hole and quickly removes the burr. A self-centering pilot collar with an adjustable stop eliminates “fishing” and prevents removal of too much brass.
A
LO DI
S
N
SO
36
LU
NG
RE
RCBS88102 . . .22 Cal.
TIO
RCBS88103 . . .6mm Cal.
FLASH HOLE CASE PILOT STOPS
RCBS88122 . . . . . . 22 Cal.
RCBS88123 . . . . . . 6MM Cal.
RCBS88124 . . . . . . 25 Cal.
RCBS88125 . . . . . . 6.5mm Cal.
RCBS88107 . . 7mm
RCBS88108 . . 30 Cal.
Save time, space and eliminate a loading bench
top full of holes. Simply attach the Base Plate-2
to any work surface, then use the pre-tapped, letter-coded holes to quickly mount or dismount
RCBS Case Trimmers, Trim Pro, Powder Measure
Stand, Reloader Special, Rock Chucker, Partner
Press and the APS Bench-Mounted Tools.
Fastening hardware included. Measures approx.
10” x 6” x 1”.
RCBS09280 . . . . . . . Accessory Base Plate-2
RCBS88126
RCBS88127
RCBS88128
RCBS88130
......
......
......
......
270 Cal.
7mm Cal.
30 Cal.
8mm Cal.
RCBS88133 . . . . . . 35 Cal.
RCBS88134 . . . . . . 36 Cal.
RCBS88135 . . . . . . 375 Cal
RELOADING DIES
RCBS
FULL LENGTH DIE SET
X-FULL LENGTH SIZER DIE AND SETS
COMPETITION FULL LENGTH DIE SET
Full Length Sizer Dies for bottleneck cases have
vents to prevent case damage caused by trapped
air and for excessive lubricant. Headspace is kept
to minimum tolerances to avoid changing the case
body length during full length sizing.
Another advance in Reloading Die design is the
RCBS X-Die. The X-Sizer eliminates the need for
repeated trimming after an initial trim is done to
standardise the case. This die does not shorten
the length of the case. But as the case grows, the
mandrel will reduce the growth rate. This is a
result of the case mouth contacting the mandrel
during sizing. cases repeatedly sized in the X-Die
will initially grow a few thousandths of an inch
and then stabilise below the maximum caselength. Using the X-Die eliminates the need to
trim after each shot.
Standard ⁄”-14 thread.
These dies aren’t for everybody. They go above
and beyond RCBS Precisioneered® Dies. If you’re
a competitive marksman measuring success in
fractions of a millimetre, RCBS Competition dies
are for you.
Calibre
Shell
Holder
RCBS38309
22 Hornet
12
RCBS37009
22-250 Remington
3
17 Remington
22 Hornet
22-250 Remington
220 Swift
222 Remington
223 Remington
243 Winchester
25-06 Remington
6.5 x 55mm Swedish
270 Weatherby
270 Winchester
7mm Rem Mag
7 x 57mm Mauser
30-06 Springfield
300 Win Mag
303 British
308 Winchester
375 H&H Magnum
416 Rem Mag
416 Rigby
RCBS38809
220 Swift
11
RCBS37209
222 Remington
10
RCBS37109
223 Remington
10
RCBS37309
243 Winchester
3
RCBS38959
25-06 Remington
3
RCBS38409
6.5 x 55mm Swedish
2
RCBS37509
270 Winchester
3
RCBS37609
7mm Remington Mag
3
RCBS37709
30-06 Springfield
3
RCBS38909
RCBS39359
300 Winchester Mag
303 British
4/26
7
REPLACEMENT PARTS
Expander-Decapping Units are available for most
calibres, when ordering please state the cartridge
for which you require this item.
RCBS098xx Expander-Decap Unit
RCBS90164 Decap Pins with Head(5)
Decap Pins for older RCBS Sizer Dies
RCBS09608 Decap Pins(5) .22-.25
RCBS09609 Decap Pins(5) 6.5mm-.45
RCBS37809
308 Winchester
3
Full Length Neck Sizer
Die Set
Die
RCBS17230
RCBS10230
RCBS10630
RCBS10730
RCBS10930
RCBS11130
RCBS11430
RCBS12030
RCBS13230
RCBS13530
RCBS13630
RCBS13830
RCBS14830
RCBS15330
RCBS15430
RCBS15530
X-FULL LENGTH DIE SETS
RCBS38312
22 Hornet
12
RCBS37112
22-250 Remington
3
• Seater die with micrometer for super accurate
bullet seating head depth in increments of
0.001”.
• Bullet inserts through a side window instead of
bottom of die.
• Special bullet-seating guide ensures correct bul
let alignment before and after seating.
• Black oxide finish
Comp
Die Set
Comp Bullet
Seater
RCBS37101
RCBS37001
RCBS37201
RCBS37301
RCBS38401
RCBS37501
RCBS37401
RCBS37601
RCBS37701
RCBS37801
RCBS37138
RCBS37038
RCBS37238
RCBS37338
RCBS38438
RCBS37538
RCBS37438
RCBS37638
RCBS37738
RCBS 37838
Calibre
22-250 Remington
222 Remington
223 Remington
243 Winchester
6.5 x 55mm Swed
270 Winchester
7mm-08 Rem
7mm Rem Mag
30-06 Springfield
308 Winchester
SHELL HOLDERS
If your shell holders don’t
securely grip the case and firm
ly fit in the press during reload
ing, you’re bound to have
headspace and sizing problems.
RCBS56594-S . 470 NE
RCBS09212 . . No.12
RCBS09202 . . . No.2
RCBS09226 . . No.26
RCBS09203 . . . No.3
RCBS09232 . . No.32
RCBS09204 . . . No.4
RCBS09234 . . No.34
RCBS09207 . . . No.7
RCBS99237 . . No.37
RCBS09210 . . . No.10
RCBS99238 . . No.38
RCBS09211 . . . No.11
RCBS99241 . . No.41
SO
A
LO DI
37
LU
NG
RE
RCBS17201
RCBS10201
RCBS10601
RCBS10701
RCBS10901
RCBS11101
RCBS11401
RCBS12001
RCBS13201
RCBS13401
RCBS13501
RCBS13601
RCBS13801
RCBS14801
RCBS15301
RCBS15401
RCBS15501
RCBS16901
RCBS22701
RCBS22801
Calibre
• Maximum concentricity between die neck and
body
S
Large easy-to-adjust hex lock rings utilise hex
head set-screws. Unless otherwise noted, all
RCBS Precisioneered® Dies have the standard
⁄”-14 thread. Dies are packaged in stackable,
plastic storage boxes specially designed to protect
the dies in shipping.
• Full-Length sizer has a raised expander ball
allowing extra leverage for smooth, effortless
neck expansion.
N
All RCBS Seater Dies have a built-in roll or taper
crimper as appropriate for the particular calibre.
To seat bullets without crimping, simply unscrew
the die until the crimp ring nolonger engages the
case mouth.
TIO
CARTRIDGE SHELLHOLDER
REFERENCE CHART
S
SO
38
LU
N
L
O A DI
NG
RE
RIFLE RESTS
REDDING
10
14
14
2
1
4
10
10
10
1
1
1
1
1
1
1
1
1
6
1
1
1/7
6
1
6
1
6
1
1
1
2
1
6
6
6
1
2
22
12
2
1
1
1
6
6
6
6
8
1
1
6
6
6
1
6
6
6
6
6
18
9
19
18
6
TIO
RCBS HORNADY
10
16
12
3
12
3
2
2
3
1
11
4
10
16
10
16
10
16
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
3
1
4
5
3
1
3
1
2
19
4/26
5
3
1
4
5
3
1
4
5
3
1
3
1
3
1
2
2
3
1
4
5
4
5
4
5
3
1
2
30
17
22
32
6
2
2
3
1
3
1
3
1
4
5
4
5
4
5
4
5
7
11
3
1
3
1
4
5
4
5
4
5
3
1
4
5
4
5
4
5
4
5
4
5
37
38
35
9
28
27
14
14
4
5
LEE
4
7
7
3
2
10
4
4
4
2
2
2
2
2
2
2
2
2
5
2
2
3
5
2
5
2
5
2
2
2
3
2
5
5
5
2
3
7
12
3
2
2
2
5
5
5
5
5
2
2
5
5
5
2
5
5
5
5
5
8
14
11
8
5
Cartridge
17 Remington
22 Hornet
22 K Hornet
22 Savage
22 BR
220 Swift
222 Remington
222 Rem Mag
223 (5.56mm)
22-250 Remington
240 Weatherby
243 Winchester
6mm Remington
6mm/284 Winchester
6mm-06 Remington
25-06 Remington
250 Savage
257 Roberts
257 Weatherby
6.5mm-06 Remington
6.5mmx57 Mauser
6.5x55 Swed Mauser
6.5mm Rem Mag
260 Remington
264 Win Mag
270 Winchester
270 Weatherby
280 Remington
7mm-08 Remington
7mm BR
7x30 Waters
7x57mm Mauser
7mm Rem Magnum
7mm Weatherby
7mm STW
284 Winchester
7.5mm Schmidt-Rubin
30 M1 Carbine
7.62x39
30-30 Win (30 WCF)
300 Savage
308 Win (7.62 NATO)
30-06 Springfield
300 H&H Magnum
300 Weatherby
300 Win Magnum
308 Norma Magnum
303 British
8x57 Mauser
8mm-06 Remington
8mm Rem Magnum
338 Win Magnum
340 Weatherby
35 Whelan
350 Rem Magnum
358 Norma Magnum
375 H&H Magnum
375 Weatherby
416 Remington
416 Rigby
44-40
444 Marlin
45-70 Govt.
458 Win Magnum
SHOOTING RESTS
Experts Benchrest
The Hoppes Experts Benchrest is a well constructed rifle rest and is ideal for
either range or field use — especially for sighting-in and benchrest shooting.
The special alloy of the cast metal—painted in a handsome orange—provides stability to stay put but is light enough to carry in the field for those
long range shots. Sturdy rifle bed measures % inches across, 31/4 inches
deep—takes the widest forends. Height extends to 81/4 inches, retracts to
53/4 inches. Screw type pointed anchor pins (may be fully retracted) in each
tripod foot assure non-slip grip on bench.
HOP3000 . . . . . . . . Experts Bench Rest
Sight-In Shooting Rest
The Sight-In rest weighs less than a pound, is adjustable, lightweight, has a
rubberised cradle, padded rubber feet and is totally weather resistant. It was
originally developed for use on the bonnet of trucks while hunting prairie
dogs. Since it won’t scratch paint or dent bodywork it has been found to be
ideal for shooting from a vehicle especially while shooting vermin and foxes.
It has been found to be perfect for sighting-in, too.
If you need a tough, high utility, all purpose rest, the Sight-In Shooting Rest
is perfect.
CWL323593 . . . . . . Sight-In Shooting Rest
Bald Eagle Custom
Bench Rests.
Details, Availability and Prices
on request.
To Special Order Only
HARRIS BIPODS
ULTRALIGHT
BIPODS
• VERSATILE
• STURDY
• LIGHT
• FAST
Harris Bipods are ultralight and lightning quick.
Folding legs have completely adjustable springreturn extensions except Model LM. The sling
swivel attaches to the clamp. Time-proven design
and quality manufactured with heat treated steel
and hard alloys. Bipods have a black anodized finish.
Series S Bipods rotate 45 degrees for instant levelling on uneven ground. Hinged base has tension
adjustment and buffer springs to eliminate tremor
or looseness in crotch area of the Bipod. They are
otherwise similar to non-rotating Series 1A2.
Model BR: Lowest of the Bipods.
Most useful for shooting off the
bench. Barrel height from approximately 6 to 9 inches; 1A2-BR wt.
10ozs., S-BR wt. 13ozs.
WHAT THEY WILL FIT
The bipods are quick detachable
and clamp to the Q.D. stud of bolt
action rifles of conventional design.
They will also fit some single shot
rifles. Will fit some other rifles with
an adapter. Harris Bipods are not
suitable for all firearms.
HOW GOOD, PERFORMANCE
WISE, ARE THE BIPODS ?
HAR1A2BR . . . . . . Solid Base
HARSBR . . . . . . . . Hinged Base
The Bipods will not change the zero
of most rifles due to in part to light
weight and leather pads on contact
area of the fore-end. Also, the rubber feet reduce shock. The legs pivot
slightly and rebound, making Bipod
impervious to heavy recoil.
Series 1A2 Bipods have a levelling
device to compensate for off-centre
sling studs. Series 1A2 Models,
except 25 and 25C have leg stop
adjustments to increase barrel clearance. Carrying with a sling or shooting off-hand is not impeded by the
Bipods.
Harris also manufacture a range
accessories to fit non-standard
swivel attachments.
Model L: The world’s largest selling commercial rifle rest. For prone
position and the bench. Compact
and light. You won’t know it’s on
the gun until you need it. Barrel
height from 9 to 13 inches; 1A2-L
wt. 11ozs., S-L wt. 14ozs.
HAR1A2L . . . . . . . . Solid Base
HARSL . . . . . . . . . . Hinged Base
Model 25: For some the Model 25
may be a bit more comfortable in
the prone position. From sitting the
extra height allows more leeway in
shooting at an elevated target. It is
the most versatile of all tall rests.
Three piece legs. Height 12 to 25
inches; 1A2-25 wt. 1 lb., S-25 wt. 1
lb. 3ozs.
HAR1A225 . . . . . . . Solid Base
HARS25 . . . . . . . . . Hinged Base
Model LM: An improved version of
the original leg notch Bipod. The
legs eject by spring action. Six height
settings from 9 to 13 inches; 1A2LM wt. 11ozs., S-LM wt. 14ozs.
Model 25C: The tallest of the
Bipods, useful in snow. It may be
better suited for unusually tall or
heavy men. Three piece leg construction. Extends from approximately
13-1/2 to 27 inches barrel height;
1A2-25C wt. 1 lb., S-25C wt. 1 lb.
3ozs.
HAR1A2LM . . . . . . Solid Base
HARSLM . . . . . . . . Hinged Base
HAR1A225C . . . . . . Solid Base
HARS25C . . . . . . . . Hinged Base
These are available to order.
SO
A
LO DI
39
LU
NG
If you can, ask a man who uses one.
The positive attachment makes a
steady hold easier by eliminating
and shifting or movement between
gun and rest, and the bipod is
always there when you need it.
The sitting position often allows
shooting over ground vegetation.
The prone position with practice
from a bench, allows nearly complete accuracy potential from a rifle.
Models BR, L, and LM in addition
to being prone rests, work superbly
well from a bench rest.
Up and ready to go in 3 seconds
HARH . . . . . . . . . . . Solid Base
RE
1A2-25 legs fully extended.
Model H: For prone or sitting this
rest is satisfactory for those of
average structure. This Bipod with
it’s improvements has been the varmint hunters favourite since 1966.
Extends from 13-1/2 to 23 inches;
1A2-H wt. 13ozs.
S
Series 1A2, Solid Base
Series S, Hinged Base
N
Ultralight Bipods
TIO
STONEY POINT
The Stoney Point Handloader’s
Precision Measurement System
Stoney Point O.A.L Gauge
Stoney Point Bullet Comparator
Small changes in the clearance between
the bullet and the rifling can make a
big difference in accuracy. Most often,
seating bullets close to the rifling will
produce improved accuracy.
Finally! Here is the solution to proper
bullet seating depth for precision handloaders. The O.A.L.. (Over All Length)
Gauge produces an accurate model
of your chamber with the bullet in
light contact with the lands of the
rifling. The result is then measured
with your caliper, allowing easy transfer of this critical dimension to the
bullet seating die. This allows you to
precisely regulate the bullet's clearance
(free-travel) to the lands: typically
.020" to.040" for hunting rounds. The
O.A.L. Gauge works with any bullet
you choose. Eliminates guess work.
Monitors throat erosion. No other
method "measures up" to the reliability
and precision of this easy to use tool.
Modified Case (required, see below)
permits Gauge use with any chamber.
Two Gauge models fit all action types
(except Win 94). Complete instructions
provided.
Measuring cartridge lengths across the bullet’s tip isn’t a reliable method of
measuring cartridge OAL. It’s not uncommon for variations of up to 0.025”
to exist from one round to the next when measured across the bullet’s tip.
Bullet points vary considerably due to the way in which bullets are made.
The Stoney Point Bullet Comparator provides a reliable measuring surface the ogive - to provide consistent, precise, measurements of loaded rounds.
The Bullet Comparator attaches to the blade of your caliper with a thumbscrew and uses an interchangeable "insert” bushing to measure from the
bullet’s ogive. The resulting measurement is consistent. “Insert” bushing are
available in thirteen (13) sizes from .17 calibre to .45 calibre.
Used in conjunction with the O.A.L. Gauge the Bullet Comparator provides
the ultimate in precise measurement. The Stoney Point Bullet Comparator
will properly align the OAL Gauge/bullet components for precision measurment with your caliper. This method allows direct comparison of your loads
as you set up your bullet seating die.
The Bullet Comparator also checks bullet uniformity — from base to the
ogive — which is critical to competitive shooters.
STY40000 . . . . . . . . . . . Bolt Action, Single Shot Straight
STY40017 . . . . . . . . . . . Autoloader, Lever, Pump Action, Curved
Stoney Point Modified Cases
STY41007 . . . . . . 17 REM
STY41526 . . . . . . 22 HORNET
. . . . . . . . . . . . . . . Adapter w/mod case
STY41014 . . . . . . 218 BEE
STY41038 . . . . . . 222 REM
STY41045 . . . . . . 222 REM MAG
STY41052 . . . . . . 223 REM
STY41069 . . . . . . 22-250 REM
STY41076 . . . . . 22 PPC, SAKO
STY41083 . . . . . . 220 SWIFT
STY41090 . . . . . . 240 WBY MAG
STY41106 . . . . . . 243 WIN
STY41113 . . . . . . 6mm REM
STY41120 . . . . . . 6mm BR REM
STY41137 . . . . . . 6PPC, .261 BR Neck
STY41144 . . . . . . 6PPC, Std Neck
STY41151 . . . . . . 257 ROBERTS
STY41168 . . . . . . 257 WBY MAG
STY41175 . . . . . . 250 SAVAGE
STY41182 . . . . . . 25-06 REM
STY41199 . . . . . 6.5x55mm MAUSER
STY41212 . . . . . . 264 WIN MAG
STY41229 . . . . . . 270 WIN
STY41236 . . . . . . 270 WBY MAG
STY41243 . . . . . . 7x57mm MAUSER
STY41533 . . . . . 7x64 BRENNEKE
STY41250 . . . . . . 7mm BR REM
STY41267 . . . . . . 7mm-08 REM
STY41274 . . . . . . 280 REM
STY41298 . . . . . . 7mm REM MAG
STY41304 . . . . . 7mm WBY MAG
STY41311 . . . . . 7mm STW
STY41328 . . . . . . 30-30 WIN
STY41335 . . . . . . 300 SAVAGE
STY41342 . . . . . . 308 WIN
STY41359 . . . . . . 30-06 SPGFLD
A
LO DI
S
N
SO
40
LU
STY41366 . . . . . . 300 H&H MAG
STY41373 . . . . . . 300 WIN MAG
STY41380 . . . . . 300 WBY MAG
STY41397 . . . . . . 30-40 KRAG
STY41403 . . . . . . 7.62x39 Russian
STY41410 . . . . . . 303 BRITISH
STY41427 . . . . . . 8x57mm MAUSER
STY41441 . . . . . . 338 WIN MAG
STY41465 . . . . . . 35 WHELEN
STY41472 . . . . . . 35 REM
STY41496 . . . . . . 375 H&H MAG
STY41519 . . . . . . 45/70 GOV’T
STY41502 . . . . . . 416 REM MAG
Factory cartridges not listed are available by Special Order. Ask for details.
The Stoney Point Cartridge
Headspace Gauge is the best
method we’ve found to extend
brass life, improve accuracy and
enhance safety by measuring
variations in headspace dimensions of cases before and after
firing, or full length resizing.
It utilises the same B-2000
body as the Bullet Comparator,
which attaches to any calipers
with a simple thumbscrew.
Then, by using one of the five
(5) available, you can measure from the case-head to the datum line on the
case shoulder. That allows you to properly set back the case’s shoulder for a
precise fit with your rifle’s chamber (typically .001” to .002”). Proper headspace will minimise case stretching, reduce work hardening, extends case life
and accuracy.
Also, by rotating the cases in the gauge you can easily identify cases with
bent rims. You can also identify cases with excessive headspace, and that
means reducing a potentially dangerous situation, as well as maintaining the
proper firing pin contact, with the primer to substantially improve the reliability of your loads.
The five bushings that are available for the Cartridge Headspace Gauge are
suitable for most bottleneck centrefire cases from .17 Remington through to
the belted magnums (Ackley improved chambers use the same size bushing):
A. .330”
Wildcat cartridges are available by sending
two (2) samples of your fire-formed brass
to the Stoney Point factory for modification.
Ask for shipping address details.
17 Rem, 222 Rem, 222 Rem Mag, 223 Rem, 220 Swift, 221 Rem
B. .350”
22 PPC, 22-250 Rem, 6mm PPC, 6mm BR Rem, 7 BR Rem
C. .375”
6mm Rem, 257 Rob, 25-06 Rem, 270 Win, 7x57mm Mauser, 30-06 Spgfld,
303 Brit, 300 H&H Mag
D. .400”
243 Win, 260 Rem, 7mm-08 Rem, 308 Win
E. .420”
284 Win, 7mm Rem Mag, 300 Win Mag, 338 Win Mag, 375 H&H Mag,
7mm STW, 6mm-284 Win, 338-06, 30-338 Win Mag
F. .188”
BLANK with .188” diameter through hole. Drill and ream for
sizes not listed.
NG
RE
Interchangeable Modified Cases have a threaded case-head allowing them to
attach to either O.A.L. Gauge. Case necks are enlarged to allow bullets to
slide in neck area. Use the same choice of bullets as intended for reloading.
Cases listed are to SAAMI specs.
Stoney Point Cartridge Headspace Gauge
TIO
Stoney Point Bore Guides
STONEY POINT O.A.L GAUGE
STY40000 . . . . . . . . . . . Bolt Action, Single Shot Straight
STY40017 . . . . . . . . . . . Autoloader, Lever, Pump Action, Curved
STONEY POINT BULLET COMPARATOR
STY42004 . . . . . . . . . . .
STY42172 . . . . . . . . . . .
STY42011 . . . . . . . . . . .
STY42028 . . . . . . . . . . .
STY42035 . . . . . . . . . . .
STY42042 . . . . . . . . . . .
STY42059 . . . . . . . . . . .
STY42066 . . . . . . . . . . .
STY42073 . . . . . . . . . . .
STY42080 . . . . . . . . . . .
STY42097 . . . . . . . . . . .
STY42103 . . . . . . . . . . .
STY42110 . . . . . . . . . . .
STY42127 . . . . . . . . . . .
STY42134 . . . . . . . . . . .
STY42141 . . . . . . . . . . .
Bullet Comparator Set, B-234-678
Bullet Comparator Set, B-13
Bullet Comparator Body, B-2000
No.1 - .172 Insert Bushing
STONEY POINT HEADSPACE GAUGE
STY42516 . . . . . . . . . . .
STY42509 . . . . . . . . . . .
STY42523 . . . . . . . . . . .
STY42530 . . . . . . . . . . .
STY42547 . . . . . . . . . . .
STY42554 . . . . . . . . . . .
STY42561 . . . . . . . . . . .
STY42578 . . . . . . . . . . .
Headspace Set, HK-66, body w/5 bushings
Headspace Bushing Set, HK-55, 5 pc
A-.330” Headspace Bushing
B-.350” Headspace Bushing
C-.375” Headspace Bushing
D-.400” Headspace Bushing
E-.420” Headspace Bushing
F-.188” Blank Headspace Bushing
STONEY POINT
The proper way to clean fine
firearms.
It has long been said that
improper cleaning ruins more
guns than shooting them. But,
it’s easy to get the job done
right with the proper cleaning
equipment. Bore guides are
essential tools in the cleaning
process. Stoney Point offers
three models to fit all popular
bolt action firearms. They’ll
protect your investment and
help you shoot better, too !
The Stoney Point Bore Guide
replaces the bolt on your
centrefire rifle to allow you to
properly clean from the breach
rather than from the muzzle
end. The unique chamber fitting seats into your chamber
and the bore guide locks into your action, just like the bolt, to provide proper alignment of the cleaning rod with the bore, thereby protecting the chamber, throat, rifling and the crown. An integrated solvent port permits solvents
to be applied to either brush or patch, and the fouling and excess solvent are
all pushed out the muzzle. This prevents contamination of the locking lugs,
receiver, action and trigger assembly.
Each Stoney Point Bore Guide has a slide-adjustable collar which allows the
guide to lock into any length action snugly — just like the bolt. All are precision machined from tempered aluminium and specially designed delrin fittings. Stoney Point Bore Guides can be used with all types of cleaning rods.
NEW! STONEY POINT CLEANING CRADLE
The safe, easy way to clean, maintain or display any long gun.
STONEY POINT BORE GUIDES AND CLEANING
CRADLE
XL-202
(25 - 30 cal)
(RED)
XL-303
(8mm-416 cal)
(GREEN)
COLLAR
DIA.
.555"
PROD #
SAKO A2, L579,
Forrester,
TIKKA 55, 65
SAKO 75
.590"
STY43049
.630”
STY43162
SAKO AV, AV Mag,
L61, Finnbear,
TIKKA 590, 595, 690, 695
Weatherby Mk V,
.675”
STY43056
.838"
STY43063
SAKO A2, L579,
Forrester,
TIKKA 55, 65
SAKO 75
.590"
STY43070
.630”
STY43186
SAKO AV, AV Mag,
L61, Finnbear,
TIKKA 590, 595, 690,695
Weatherby Mk V,
.675"
STY43087
.838"
STY43094
SAKO AV, AV Mag,
L61, Finnbear,
.675"
STY43117
Weatherby Mk V,
.838"
STY43124
SAKO A1, L46, L461,
Vixen
STY43032
Stoney Point’s affordable new Cleaning Cradle
has all the “right stuff ”. It will fit any long gun
— big and heavy, small and light, short or long.
Each cradle end is moulded specifically to hold
the differently shaped ends of any traditional
firearm stock, from an heirloom 22 rimfire to
a heavy barrelled benchrest rifle with a 3” wide
stock.
The cradles are moulded from space age solvent resistant, thermoplastic
polymer with characteristics much like hard rubber, so they will not damage
fine stocks and finishes. Both sides of each cradle are notched to hold all
sizes of cleaning rods. Two 3/8” fibreglass rods are friction fit to the mating
holes in the cradles to allow easy length adjustment or quick disassembly for
compact transport in your range box or cleaning kit. Any number of cradles
can be interconnected, thus making one unitised unit for less space and more
security at shooting events, gun shows or for display purposes.
Check out our selection of
Pro-Shot & Dewey Cleaning Supplies
on pages 48 & 51.
41
LU
NG
SO
A
LO DI
S
XL-101
(17 - 25 cal)
(GOLD)
ACTION TO FIT
RE
BORE GUIDE
MODEL
Bore Guide for .17 to .25 Cal. B/A rifles XL-101
Bore Guide for .25 to .30 Cal. B/A rifles XL-202
Bore Guide for 8mm to .41 Cal. B/A rifles XL-303
Bore Guide Extra Bolt Collar (see PROD# below)
Cleaning Cradle
Cleaning Rod Caddy
Double Cleaning Rod Caddy with assembly kit
N
STY43001 . . . . . . . . . . .
STY43018 . . . . . . . . . . .
STY43100 . . . . . . . . . . .
STY43xxx . . . . . . . . . . .
STY44060 . . . . . . . . . . .
STY44084 . . . . . . . . . . .
STY44046 . . . . . . . . . . .
TIO
STONEY POINT
Stoney Point Laser Magic
Bore Sighter
NEW! Stoney Point Sight Lines™ Lens
Set your sights on this ! Plumb,
square, and at a known elevation
above the bore’s centre.
This easy to use lens quickly determines scope alignment problems
and makes scope installation faster,
easier and more precise.
When mounting scopes, the Sight
Line™ lens performs three important tasks. It allows you to visually
plumb Sight Lines™ lens with the
firearm, then plumb the scope’s
vertical crosshair using the scope
base windage adjustment screws (if
present) with the bore centreline.
At the same time, the Sight Lines™
lens easily squares the horizontal
crosshair. When both the scope’s
vertical and horizontal crosshairs
coincide with the Sight Lines™ lens engravings, the scope’s reticle will be
plumb and square with the firearm — misalignment is visually evident.
Properly used, the scope’s reticle will be optically centred and free of excessive parallax.
The Sight Lines™ lens can be used with any telescopic sight and many other
sight systems. It is designed for use with all bolt action centre-fire firearms.
The Sight Lines™ lens has a circular section removed at the base which
allows the lens to be correctly fitted on the open bolt of popular bolt actions
(.700” or smaller diameter bolts) or placed on the .700” diameter bushing
furnished with the Sight Lines™ lens kit. The bushing allows the lens to be
used in conjunction with the Stoney Point XL-101 Bore Guide and for all
bolt action firearms with bolt diameters larger than .700” and also furnished
is a stretch cord to hold the Sight Lines™ lens snugly to the ocular lens of
the scope.
NEW! Stoney Point Laser Magic™ Bore Sighter
Setting a new standard for easy, accurate bore sighting.
One of the primary goals in the development of Laser Magic™ was to eliminate the problem that’s evident in most other laser bore sighting devices, precisely aligning a laser beam with the bore. Stoney Point designed the NEW
Laser Magic™ to install at the breech. Then they designed an easy-to-use
method to direct a tightly focused laser beam through the centre of the bore.
When properly installed, Laser Magic’s high intensity laser beam does not
contact the interior surfaces of the barrel.
Instead it’s beam travels in a straight line,
centred down the full length of the barrel,
directly onto a bore sighting target. This
allows you to sight-in your scope or iron
sights far more accurately than other methods and with a high level of confidence that
you will be “on the paper” every time.
• Aim the laser onto a target (12-1/2 or 25 yards is recommended) and adjust
your sights onto the projected laser spot.
Your gun is now on the paper and range ready for final sight adjustment.
Optional Accessory:
Muzzle Reducer™
Stoney Point suggest the use of this accessory
when bore sighting guns of 7mm and larger bore
diameter. However, you can use it on any size
bore to keep the laser travelling “dead centre
perfect”. The Muzzle Reducer™ slips over the
muzzle of your firearm (with or without front
sight ramps, to 1/2” wide) and creates a smaller
aperture for the laser beam to travel through.
When the beam shines clearly through the tiny (.188 diameter) hole, the laser
beam is precisely aligned.
NEW! Stoney Point Target Knobs
Finally — removable, target style turrets for hunting scopes.
Use a hunting scope for serious target work?
Stoney Point’s Target Knobs thread-on in
place of your scope’s duct covers to provide
target type, finger adjustable turrets for
your scope. Precise, micrometer style, laser
engraved graduations correspond to the
scope manufacturer’s adjustment recommendations. The Stoney Point Target Knobs
install in minutes and they’re easily interchangeable with other scopes of the same manufacturer, all without disturbing your scope settings. Or, remove the target knobs and re-install your dust
covers for “field duty”
An internal spindle with a screwdriver tip engages the scope’s coin slot to
provide fingertip control of the scope’s elevation or windage adjustments.
Stoney Point Target Knobs are black satin anodized with laser engraved
graduations. They’re available in singles or in pairs.
New! Models are now available to fit Burris and Simmons scopes as well as
Leupold and Tasco.
NEW! Stoney Point Target Knobs
STY46002 . . . . . . . . . . .
STY46019 . . . . . . . . . . .
STY46026 . . . . . . . . . . .
STY46033 . . . . . . . . . . .
STY46040 . . . . . . . . . . .
STY46057 . . . . . . . . . . .
Leupold Target Knobs (1” scopes) each
Leupold Target Knobs (1” scopes) pair
Tasco/Simmons Target Knobs (1” scopes) each
Tasco/Simmons Target Knobs (1” scopes) pair
Burris Target Knobs (most current 1” scopes) each
Burris Target Knobs (most current 1” scopes) pair
NEW! Stoney Point Sight Lines™ Lens
STY43537 . . . . . . . . . . . Sight Lines™ Lens
NEW! Stoney Point Laser Magic™ Bore Sighter
STY43506 . . . . . . . . . . .
STY43520 . . . . . . . . . . .
STY43568 . . . . . . . . . . .
STY43575 . . . . . . . . . . .
Laser Magic™ - Deluxe
Muzzle Reducer
Reflective Target
4A Batteries, pair
Check out our selection of
Targets on page 71.
A
LO DI
S
N
SO
42
LU
NG
RE
Another requirement was to design a product that would fit virtually all bolt action
rifles. They came close. Currently, Laser
Magic™ will fit all bolt action centrefire
guns with any chamber or bore size ranging from .17 Remington to .50
BMG (some actions will require an optional action collar size).
Last, Laser Magic™ had to be easy to use. Well, if you can install a bore
guide, this is the product for you ! Here’s how:
• Remove the rifle’s bolt and install the Laser Magic’s™ tapered nose section
up into the chamber opening;
• Then, adjust the action collar and lock the assembly in place with the
threaded brass pin snugly resting against the rear surface of the bolt handle
relief, just like installing a bolt;
• Now, install the laser module and twin eccentrics onto the rear laser receiver with the nose of the laser fitted snugly against the centering cone located
in the laser receiver. Turn the laser “on” by rotating the rear mounted switch.
Then rotate the eccentric and/or the laser module itself to align the beam
until it does not “bounce” off the rifling (this is visually evident).
TIO
BORE TECH
Stoney Point Telescoping Bipods
Compact Hunter - Ultimately packable, with three section legs that
telescope from 17” to 38”. Shoot from a high prone or from a sitting
or kneeling positions. Also, an excellent choice for young shooters.
Black anodised. 10 ounces.
STY47665 . . . . .PH-2 Professional Hunter Bipod (2 pc) 35”-65”
STY47689 . . . . .VH-3 Versatile Hunter Bipod (3 pc) 27”-68”
STY47702 . . . . .CB-T3 Belt Pouch, Clip-on
Stoney Point Porta-Range II
Create your own Target Range almost anywhere.
The Porta-Range II is compact durable and it’s versatile. It’s a turnkey package that includes everything you’ll need to put a group on the paper. Here’s
what you’ll get:
• Four lightweight fibreglass
legs that insert into two tough
nylon moulded connectors;
• The nylon connectors, in
turn, attach to a fibreglass
cross member at the bottom of
the target stand;
• Two pieces of specially
mould ed 24” U-channel which
slip onto a 18” x 24” wax coated, double corrugated target
backer to provide rigidity. The
backer will accommodate the
furnished per target and any
other targets up to the backer
size used. When the corrugated
backer is “shot out”, you can
substitute cardboard, plywood,
fibreboard or almost any other
material you choose up to 1/4”
thick.
• To provide the extra stability that’s simply not available in most portable
target systems, Stoney Point furnish a simple but effective staking system
which uses a tension adjustable cord and ground stake. The stake holds the
target assembly securely to the ground so it won’t blow down in a stiff wind.
• A wind flag is also provided which installs at the target top to help you
read the wind and a starter target similar to that used by benchrest shoot
ers.
All this packs down into a box measuring just 4” x 4” x 24”
BTEBS2244 . . ..22 cal.- 6mm , 44” long
BTEBS6644 . . .6mm - 6.5mm, 44” long
BTEBS2744 . . ..27 cal. - .33 cal. 44” long
Rod Cases
Bore Tech’s new Rod Cases
provide Total Protection for
your cleaning rods. The Rod
Case encases the entire rod
length including the handle
with individual internal tubes
protecting your cleaning rods.
The convenience of quick
one quarter turn locking caps
and a carrying strap make
these the ultimate in cleaning
rod portability.
BTERC504 . . . . . . . Rod Case (up to 4 cleaning rods)
BTERC506 . . . . . . . Rod Case (up to 6 cleaning rods)
The Original Patch Hog™
The preferred patch and
solvent collection system for
the competitive shooter. Easy
to use ..... Simply attach an
empty water or soft drink
bottle to the small end then
slip the large end of the
Patch Hog over the end of
the muzzle. Clean your rifle
in the normal way and watch
your used patches accumulate
inside the bottle. . This method of cleaning quickly and easily eliminates the mess and odour of solvents,
splatter and used patch pick-up. It allows the safe disposal of fouled patches
and will not be harmed by the strongest of cleaning solvents. The Patch Hog
is designed to fit all barrels with or without iron sights.
BTEPH100 . . . . . . . . . . . . . . . Patch Hog
Action Cleaning Tool
The Action Cleaning Tool enables you to
thoroughly clean your rifle’s action ensuring
accurate performance. It consists of a two
piece anodised aluminium with a Delrin®
guide sleeve and a large cushioned handle.
The brass locking lug uses inexpensive, disposable dental rolls to efficiently clean the
hard to reach lug recesses and chamber face.
Also included is an 8-32 adapter for chamber brushes and mops to dry the chamber
after cleaning. Includes 50 disposable rolls.
BTEAT100 . . . . . . . Action Cleaning Tool
SO
A
LO DI
43
LU
NG
RE
STY44077 . . . . . . . . . . . Porta-Range II
Barrels.... you can freeze, float, coat, throat,
crown, brown or blue them, but, to maintain
a high degree of accuracy they have to be
cleaned !
• Dual sets of bearings and machined races
allow brush or patch to follow rifling for
a thorough cleaning
• Spring steel, coated protects rifling
• Large cushioned handles, effortless rota
tion
• Standard 8-32 or 5-40 female thread
S
Professional Hunter - Two section, quick adjusting legs telescope from 35” to 65”. Shoot
kneeling, standing or while
sitting at stool heights with total
confidence. Black Satin anodised
finish. 18 ounces.
BORE STIX™ Cleaning Rods
N
These high quality shooting rests provide more
height than gun mounted bipods for
greater versatility in the field. Compact,
lightweight design sets up quickly for
improved accuracy on any terrain. Ideal
for stalking or stand hunting with all
types of firearms. Use sitting, kneeling,
squatting, or stand up with the ExtraHeight model. Multi-function rest top
permits "panning" for rapid sight alignment and the ability to "track" moving
game.
TIO
OUTDOOR EDGE
These award winning
skinners are easier, faster
and safer to use because
you cut with a straight
wrist. Cutting hook opens
game like a zipper and Tshaped handles save time
by allowing use of both
hands without setting the
knifedown. Chrome-Moly
AUS-8A stainless steel
blades are hand-finished
to a razor’s edge ensuring
superior edge retention
and performance. Each
knife comes complete with
a full-grain leather belt
sheath.
Whitetail Skinner
OEWT10
Blade 2-⁄” Overall: 5”
Serrated Whitetail Skinner
OEWT10S
Blade 2-⁄” Overall: 5”
All three tools are secured on a
compact, full-grain belt sheath
The Kodi-Pak is the most complete and effective system available to field dress, skin, cape and quarter any big game animal.
This set features the deep bellied Kodi-Skinner with razor
sharp opening hook, the Kodi-Caper for detailed cuts and delicate caping work and the aggressive Kodi-Saw with diamondcut blade for quartering game or clearing thick bush.
Serrated Game Skinner
OEGS100S
Blade 3” Overall: 5-⁄”
Serrated Game Skinner
OEGS100S
Kodi-Pak . . . . . . . . OEKP1
Blade 3” Overall: 5-⁄”
(Total weight is 16 ounces)
Kodi-Caper Blade: 2-1/2” Overall: 7-3/8”
Kodi-Skinner Blade: 4-3/8” Overall: 9”
Kodi-Saw
Blade: 6” Overall: 9-1/4”
(Saw blade is replaceable)
The Kodi-Saw tucks neatly
into the back of the sheath
upward for quick, easy access
Cutting hook opens
like a zipper
NEW! Kodi-Caper
OEKC1 — Blade: 2-1/2” Overall: 7-3/8”
Ideal trout-bird-caping knife for detailed cutting.
NEW! Kodi-Skinner Drop-Point . . . . . . . . . .
OEKS10DP — Blade: 4-1/4” Overall: 8-7/8”
A
LO DI
S
N
SO
44
LU
NEW! Griz-Saw
OEGW2 — Blade: 8” Overall: 11.25”
The Griz-Saw’s triple ground diamond-cut blade rips through
wood and the toughest bone. T-Shaped handle provides a secure
grip, even when wet. Includes quick-release Delrin sheath with
swivel-clip attachment.
6” Kodi-Saw Replacement Blade —OEKSR6
8” Griz-Saw Replacement Blade — OEGSR8
NG
RE
Kodi-Skinner
OEKS10 — Blade: 4-3/8” Overall: 9”
Deep bellied skinner blade with hook for easy field dressing.
T-Handle allows use of both
hands without setting the knife
down
TIO
Knives and Sharpening Kits
SPYDERCO
One touch of your finger on the positive lock
button and the Wedge releases instantly. It’s
the perfect quick access knife for all outdoor
activities from boating to backpacking, climbing, scuba diving, running, hunting and fishing.
Each Wedge is hand ground razor thin from 6M
stainless steel for superior edge retention and
performance. Tear drop Delrin® handles feature
gripping ridges for secure, non-slip control, even
when wet. The Wedge and Wedge II come complete with a Swivel Clip and Cord-Loop for a
variety of attachments to a fishing or floatation
vest, scuba-BC, belt loop, D-Ring, inside the
pocket or around the neck carry.
Wedge
OEWG1
Blade: 2-⁄” (6 cm)
Wedge II
OEWG2
Blade: 3” (7.6 cm)
Overall: 5” (12.7 cm)
Overall: 6-⁄” (17.1 cm)
Finger Touch Lock Release
Sharpening Simplicity
The Tri-Angle Sharpmaker enables even the in-experienced to attain professional sharpening results
with ease. The stones measure 7” in length and are formed in a unique triangle shape to hone both
serrated and plain edges. Each stone incorporates a groove for sharpening pointed objects such as
fish hooks and darts. When the stones are placed in the keyed holes in the ABS injection-moulded
base and a simple slicing motion used, the Sharpmaker provides for effective angle control when
sharpening knives.
For the safety of your hand, brass protection rods are provided. The Sharpmaker’s components can
easily be stored within it’s own storage case.
S
45
LU
N
SO
A
LO DI
NG
RE
SPY204MF . . . . . . . . Tri-Angle Sharpmaker 204MF
TIO
MTM CASE-GARD
Ammo Storage Boxes
20 ROUND SLIP-TOP CARTRIDGE BOXES
H-50 SERIES
The J20 slip-top boxes
now come in three cartridge sizes and they hold
20 rounds. Their size is
convenient to fit easily
into your shirt or jacket
pocket. Available in clear
red (29) clear smoke (41)
and wild camo (09).
MTMJ20XS(--) . . . .17/.221/.222/.223 Rem, .222 Rem Mag
MTMJ20M(--) . . . . 22-250 Rem, 243 Win, 308 Win, PPC etc.
MTMJ20L(--) . . . . . 220 Swift, 25-06 Rem, 30-06, to 458 Win
Specify colour (--) when ordering.
20 SERIES
Worn on the belt, the R20
ammo carrier puts twenty
rounds at the hunters fingertips. Each cartridge fits into
its own recess, bullet down for
easy removal. The bullet’s tip
is not allowed to touch the
bottom of the case, with two
special ribs. The MTM SnapLok latch prevents accidental
opening. Calibres listed will
have bullet tip protection and
little rattle.
These deluxe 50 round
ammo boxes were designed
for the ultimate in ammo
protection and ease of
transporting. Convenient
fold down carrying handle.
Specially designed so that
belted magnums can be
carried rim up or down.
Colour: Green
MTMH50RS . . . . . .17/.222/.223 Rem
MTMH50RM . . . . . 22-250 Rem, .243/.308 Win, etc.
MTMH50RL . . . . . 220 Swift, 270 Win, 25-06/30-06 to .458
MTMH50MG. . . . . .257/.300/.340/7mm Wby Mag, .264/.284,
.303 Brit, .300/.338 Win Mag, 6.5mm/7mm Rem
Mag, 375 H&H Mag, etc.
MTMH50XL . . . . . 404 Jeffery, 416 Rigby, .416 Rem Mag, 45-70,
100 ROUND AMMO BOXES
These deluxe 50 round ammo
boxes were designed for the
ultimate in ammo protection
and ease of transporting.
Convenient fold down carrying handle. Specially designed
so that belted magnums can
be carried rim up or down.
Specify colour (--) when ordering. Green (10), Wild Camo (09)
MTMRS20(--) . . . . .17/.221/.222/.223 Rem, 30 Carbine
MTMRM20(--) . . . . 22-250 Rem, .220 Swift, .243 Win, .308 Win,
6mm Rem
MTMRL20(--) . . . . .257/.300/.340/7mm Wby Mag, .264/.284, .300/
.338 Win Mag, 6.5mm/7mm Rem Mag, 410 ga.
50 SERIES
Made of virtually indestructible material that will
not warp, crack, chip, peel,
expand or contract the 50
series are available in five sizes
and will hold cartridges from
.22 Hornet to .458 Win Mag.
Each cartridge rests in its
own individual compartment.
Features include living hinge,
Snap-Lok latch giving protection from dirt and moisture.
Load Label incl’d.
Specify colour (--) when ordering.
Green (10), Clear-Blue(24), Wild Camo (09)
MTM22H(--) . . . . . .22 Hornet, .218 Bee, etc.
MTMRS50(--) . . . . .17/.222/.223 Rem, .22 Rem Mag,
MTMRSS50(--) . . . 22/6mm PPC and BR
MTMRM50(--) . . . . 22-250 Rem, .243/.308 Win, etc
MTMRL50(--) . . . . 220 Swift, 270 Win, 25-06/30-06 to .458
60 SERIES
All the features of the 50 series but with space for an additional ten rounds
- 60 rounds total capacity
Specify colour when ordering: Green(10), Red(30)
A
LO DI
S
N
SO
46
LU
Specify colour (--) when ordering. Green (100, Wild Camo (09)
MTMR100(--) . . . . . For 22-250 Rem to .375 H&H Mag
The RS-100 is a textured flip-top 100 round small rifle ammunition box.
Features are the same as the 50 series
MTMRS100(--) . . . For .17/.222/.223 Rem etc.
AMMO WALLETS & RIMFIRE AMMO BOX
Hunters appreciate the shirt
or jacket pocket availability
of extra rounds. All 9 cartridges are held securely, for
the protection of the bullet
tips. Each can be removed
quietly and quickly when
needed. Wallets have a scuff
resistant textured finish.
Colour: Brown (70)
MTMW9SM70 . . . . .17/.222/.223 Rem, etc.
MTMW9LM70 . . . 22-250 Rem, 220 Swift, .243/308 Win,
25-06/30-06, 270 Win, 7x57 Mauser, 7mm Rem Mag
.303 Brit, 264 Win Mag, 257/.300 Wby etc
AFRICAN BIG GAME AMMO CARRIER
MTMBUF1070 . . . . .378/.416/.460 Wby, .416 Rigby, .404 Jeffery,
.500 Nitro, .470 Nitro Express
RIMFIRE AMMO BOX
MTMSB200 . . . . . . 200 Round Rimfire Box
NG
RE
MTMRM60(--) . . . . 22-250 Rem, .243/.308 Win, etc
MTMRL60(--) . . . . 220 Swift, 270 Win, 25-06/30-06 to .458
The R-100 ammo box is for shooters who require 100 rounds supply of
ammunition like varmint hunters. The R-100 box can be configured to hold
as small as a 22-250 Rem, all the way up to .375 H&H Mag. This is achieved
by the inner tray being able to rotate to two different heights. Also feature a
living hinge and a carrying handle for easy transporting.
TIO
Reloading Accessories
MTM CASE-GARD
SPORTSMAN’S DRY BOXES
LOADING TRAYS
The Universal and Compact
loading trays are the most
versatile with their patented
designs. They will accommodate virtually all rifle
cartridges sold in the United
States. The Universal tray will
take rifle cartridges from .17
Rem through .458 Win Mag.
and 9mm, .38 and .45 pistol
calibres. The Compact tray
has cavities on each side for
different calibres
The tongue and groove construction of the Sportsman
Dry Boxes uses an O-Ring
design for water resistant
sealing. Large easy to open
lockable latch. The lid has
a comfortable handle and is
removable like military style
boxes. The MTM SDB-2T
comes with a removable tray.
Colour: Forest Green (11), Wild Camo (09)
MTMSDB0(--) . . . . 14” x 7-1/2” x 9”.
MTMSDB1(--) . . . . 15-1/2” x 8-1/2” x 9”,
MTMSDB2(--) . . . . 15-1/2” x 8-1/2” x 12”
HANDLOADERS LOG
Colour: Grey
MTMLT150 . . . . . . Universal Loading Tray.
MTMLT50 . . . . . . . Compact Loading Tray,
PRIMER FLIPPER, POWDER
FUNNEL, LOAD LABELS
The Primer Flipper is an
indispensable time saver for
shaking primers so they are
all anvil-side up.
The Universal Powder Funnel
Kit includes a funnel and
standard length adapters for
.17 Rem, .222 Rem, and .30
through to .45 calibres and a
long universal drop tube.
Load Labels will help you
keep track of what load you
have in each box.
MTMUF1 . . . . . . . . Universal Powder Funnel
MTMPF41 . . . . . . . Primer Flipper,
MTMLL1 . . . . . . . . Load Labels (50 per pack)
The new Handloaders Log is the organised shooter’s dream. With a total
of 150 pages, space provided for recording extremely detailed data. For
example, you can keep track of your ammunition performance, pet loads
for different firearms, firearms inventory and the list goes on. Also, the large
assortment of targets provided helps you quickly analyse your reloads.
MTMHL95 . . . . . . . Handloaders Log
IMPACT BULLET PULLER
FOAM AMMO BOX LINERS
The FL1 is a 1/2” thick
Charcoal Grey open cell foam
pad for lining Ammo boxes. It
is great for reducing rattle and
helps to protect bullet points.
Each liner is large enough to
line the 100 round ammo box
or several 50 round boxes.
Colour: Charcoal Grey
Dimensions: 7-1/4” x 7-1/4” x 1/2”
For the price of a box of ammo, you can have an Impact Bullet Puller. It will
allow you to turn that mistake you just discovered back into reusable components. This Impact Bullet Puller comes with three varying size collets that
work great for most centrefire cartridges. It will pay for itself after only a few
uses. Buy one now before you need it.
FA836017 . . . . . . . . Impact Bullet Puller
S
47
LU
N
SO
A
LO DI
NG
RE
MTMFL1 . . . . . . . . Foam Liner
TIO
Pro-Shot™ Products Inc.
PRO-SHOT
Benchrest Rifle Bronze Bore
Cleaning Brushes
Cotton Flannel Cleaning Patches
Nothing surpasses 100%
Cotton Flannel Fabric for the
purposes of absorbing foreign
matter and residue, and in
turn carrying it through the
bore with the least amount of
abrasive contact to the barrel’s
rifling. Patches are packed in
resealable ziplock bags.
Designed for competition shooters to withstand
frequent use. Construction consists of a Brass Core
and Coupling with Bronze Bristles. The best type
of brush to use because, it will not harm the bore.
We have a specific size for each calibre; and each
brush is oversized for longer life. All brushes have
⁄” threads, except .17 Cal.(⁄ threads)
PS17R . . . . . . . . . . . .17 cal.
PS22R . . . . . . . . . . . .22 rimfire
PS22CFR . . . . . . . . .22 centrefire
PS6R . . . . . . . . . . . . 6mm
PS25R . . . . . . . . . . . .25 cal.
PS65R . . . . . . . . . . . 6.5mm
PS270R . . . . . . . . . . .270 cal.
PS7R . . . . . . . . . . . . 7mm
PS30R . . . . . . . . . . . .30 cal
PS765R . . . . . . . . .
PS8R . . . . . . . . . . .
PS338R . . . . . . . . .
PS35R . . . . . . . . . .
PS375R . . . . . . . . .
PS416R . . . . . . . . .
PS45R . . . . . . . . . .
PS50R . . . . . . . . . .
7.65mm
8mm
.338 cal.
.35 cal.
.375 cal.
.416 cal.
.45 cal.
.50 cal.
Benchrest Spear Tipped
Brass Jags
A Unique Brass Jag
Quality made brass jags for efficient cleaning. A jag
draped with a patch completely covers the bore for
a better job of cleaning. All jags have ⁄” threads
except .17 cal. and shotgun gauges. The benchrest
jag is made with a spear tip that keeps the patch in
place while cleaning.
PSJ17B . . . . . . . . . . .17 cal.
PSJ226B . . . . . . . . . .22-6mm
PSJ6B . . . . . . . . . . . 6mm
PSJ25B . . . . . . . . . . 25 cal.
PSJ65B . . . . . . . . . . 6.5mm
PSJ270B . . . . . . . . . .270 cal.
PS7B . . . . . . . . . . . . 7mm
PSJ30B . . . . . . . . . . .30 cal.
PSJ8B . . . . . . . . . .
PSJ338B . . . . . . . .
PSJ35B . . . . . . . . .
PSJ375B . . . . . . . .
PSJ416B . . . . . . . .
PSJ45B . . . . . . . . .
PSJ50B . . . . . . . . .
8mm
.338 cal.
.35 cal.
.375 cal.
.416 cal.
.45 cal.
.50 cal.
Size
PS34500 . . . . . . . .3/4” square
PS341000 . . . . . . .3/4” square
PS118500 . . . . . . .1-1/8” square
PS1181000 . . . . . .1-1/8” square
PS138500 . . . . . . .1-3/8” square
PS1381000 . . . . . .1-3/8” square
PS134500 . . . . . . .1-3/4” square
PS1341000 . . . . . .1-3/4” square
PS2250 . . . . . . . . .2” round
PS2500 . . . . . . . . .2” round
PS21000 . . . . . . . .2” round
PS214250 . . . . . . .2-1/4” square
PS214500 . . . . . . .2-1/4” square
PS214750 . . . . . . .2-1/4” square
PS212250 . . . . . . .2-1/2” round
PS212500 . . . . . . .2-1/2” round
PS3100 . . . . . . . . .3” square
PS3250 . . . . . . . . .3” square
PS3500 . . . . . . . . .3” square
PSMP17 . . . . . . . . . .17 cal.
PSMP22 . . . . . . . . . .22
PSMP2427 . . . . . . . .24-.27 cal.
PSMP3035 . . . . . . . .30-.35 cal.
PSMP38 . . . . . . . . . .35-.40 cal.
PSMP45 . . . . . . . ..40-.45 cal.
PSMP50 . . . . . . . ..410/.44-.50 cal.
PSMP20 . . . . . . . .20-28 gauge
PSMP12 . . . . . . . .10-12 gauge
PSMPS . . . . . . . . .12 Ga. Mopster
Nylon Cleaning Brushes
Left column from top; Shotgun
brush adapter for .27 cal. rods,
adapter for .27 cal rods to take
smaller accs., Parker Hale
small rod adapter, Parker Hale
large rod adapter, right column
from top; English Shotgun rod
adapter, muzzle guard, cleaning
rod stop, brass patch holder .22.45 cal.
PSAD1 . . . . . . . . . . . . .
PSAD2 . . . . . . . . . . . . .
PSADPHS . . . . . . . . . .
PSADPHL . . . . . . . . . .
PSADPHSG . . . . . . . . .
PSMG1 . . . . . . . . . . . . .
PSMG2 . . . . . . . . . . . . .
PSST1 . . . . . . . . . . . . . .
PSST2 . . . . . . . . . . . . . .
PSPHB . . . . . . . . . . . . .
PSPHS . . . . . . . . . . . . .
PSADO . . . . . . . . . . . . .
This Action Cleaning Tool kit
consists of 3 basic tools, each
created for an important cleaning operation: Lug recess tool
with cleaning felts, Chamber
swab handle (will accept cotton mop), and a multi-purpose
brush for cleaning the bolt face,
etc.
S
N
SO
48
LU
PSACTKT . . . . . . . . . .
PSACT . . . . . . . . . . . . .
PSACTR . . . . . . . . . . . .
PSCH1 . . . . . . . . . . . . .
Action Cleaning Tool Kit
Action Tool-Lug Recess Tool
Action Tool Refills (50)
Flexible Chamber Cleaning Tool
NG
RE
A
LO DI
PS7NR . . . . . . .7mm
PS30NR . . . . . ..30 cal.
Shotgun Adapter ⁄ to ⁄-
Brush/Patch Holder Adapter .27 & Up rods
Parker-Hale red handle rod to Pro-Shot accs.
Parker-Hale black handle rod to Pro-Shot accs.
English Shotgun rod adapter
Muzzle Guard .22 - .26 cal rods
Muzzle Guard .27 cal. & Up rods
Rod Stop for .22 - .26 cal. rods
Rod Stop for .27 cal & Up rods
Brass Patch Holder, .22 - .45 cal.
Steel Patch Holder, .22 - .45 cal.
Outers rod to Pro-Shot Accessories
Action Cleaning Tool Kit
Nylon brushes are great when cleaning your rifle
bore with strong copper remover such as Shooter’s
Choice Copper Remover. This solvent will chemically attack normal bronze bristle/brass core brushes and destroy them quickly. The nylon brushes
allow you to apply the solvent to the bore with
some mechanical cleaning taking place.
PS22NR . . . . . ..22 cal.
PS6NR . . . . . . .6mm
TIO
Qty
500
1000
500
1000
500
1000
500
1000
250
500
1000
250
500
750
250
500
100
250
500
Cleaning Accessories
Cotton Bore Mops
These Cotton Bore Mops are made of 100% cotton
and have a brass twists and core. They are made
of the highest quality construction possible. Mops
can be used for quick cleaning and bore lubrication.
Mops are excellent when using copper solvent in the
bore for removing stubborn copper fouling because
they create a foaming action which helps the solvent
attack the copper. Mops have ⁄ threads except
.17 cal., ⁄
Application
.17 cal.-.22 cal
.17 Cal.-.22 cal
.22 to .270 cal.
.22 to .270 cal.
6mm to 7mm
6mm to 7mm
7mm to .38 cal.
7mm to .38 cal.
.270 to .38 cal.
.270 to .38 cal.
.270 to .38 cal.
.38 to .20 gauge
.38 to 20 gauge
.38 to 20 gauge
.45 to .58 cal.
.45 to .58 cal.
12 to 16 ga.-.45 cal.
12 to 16 ga
12 to 16 ga.-.45 cal.
Pro-Shot™ Products Inc.
PRO-SHOT
Cleaning Rods
PRO-SHOT “STOPPER”
The Stopper fits into the chamber to prevent solvent and fouling from running back into the action. The body has an adjustable sleeve and knurled
adjusting screw, designed to fit the action length precisely.
PSUV22K36 . . .Universal Rifle/Shotgun Kit
incl; .22-.26 cal. 36” rod, rifle patch holder, patches,
shotgun adapter and shotgun patch holder
incl; .27 & Up cal. 30” rod, rifle patch holder, patches,
incl; .27 & Up cal. 36” rod, rifle patch holder, patches,
PS30SG3. . . . . .Shotgun rod 30” with Patch Holder and Patches
PS36SG3. . . . . .Shotgun rod 36” with Patch Holder and Patches
SILICONE CLOTH
100% cotton impregnated with pure silicone, removes
dust and fingerprints and leaves a lustrous protective
film on all metal, wood and plastic surfaces.
. . . . . . . . . . . . . .PSSILC
WIPE CLOTH
100% cotton flannel, finished both sides. Packet contains 3 clothes with sewn edges.
. . . . . . . . . . . . . .PSWIPE
.26 Cal. - .30 Cal.
PSBG2
.303 Cal. - .375 Cal.
PSBG3
.26 Cal. - .30 Cal
PSBG4
.17 Cal.
PSBG5
Solvent Port for PSBG1
Solvent Port for PSBG2 & BG4
Rifle Actions to fit
Remington 700-40X-78-72-722725-788, Ruger All Model 77,Win
70-54-56, Savage 110-112V,
Mauser 98, Enfield 1917, Hart,
Stolle, Kimber 89, Browning ABolt, Dakota.
All of the above models, short or
long actions.
All of the above models, short or
long actions.
Sako large Action A3, A4, L61,
Finnbear,
Weatherby Vanguard, Browning
L-70.
Remington 700-40X-78-72-722725-788,
Ruger All Model 77s, Win 70-5456, Savage 110-112V, Mauser 98,
Enfield 1917, Hart, Stolle, Kimber
89, Browning A- Bolt, Dakota.
PSSP1
PSSP2
Universal Field Kit
Ideal when travelling or out hunting. Kit includes: Swivel T-handle, 5 section rod, and patch holders
for .22 - .45 calibre and all
shotgun gauges with shotgun
adapter.
PSUFIELD
Black Powder Accessories
Item
PS45BP . . . . . . . . . . . . . Bore Brush
PS50BP . . . . . . . . . . . . . Bore Brush
PS54BP . . . . . . . . . . . . . Bore Brush
PS58BP . . . . . . . . . . . . . Bore Brush
PS50BP132 . . . . . . . . . . Bore Brush
PS54BP132 . . . . . . . . . . Bore Brush
PSJ45BP. . . . . . . . . . . . Black Powder Jag
PSJ45BP132 . . . . . . . . . Black Powder Jag
PSPUL1 . . . . . . . . . . . . Ball Puller
PSPUL2 . . . . . . . . . . . . Ball Puller
PSS1 . . . . . . . . . . . . . . . Fouling Scraper
PSS2 . . . . . . . . . . . . . . . Fouling Scraper
PSBPB . . . . . . . . . . . . . Breech Plug Brush
PSWRM . . . . . . . . . . . . Black Powder Worm
Black Powder Rod Adaptors
Allow rods and accessories to interchange
PSAD8 . . . . . . . . . . . . . ⁄ to ⁄
PSAD10 . . . . . . . . . . . . ⁄ to ⁄
PSAD12 . . . . . . . . . . . . ⁄ to #5-⁄
Cal.
.45 Cal
.50 Cal
.54 Cal
.58 Cal
.50 Cal
.54 Cal
.45 Cal
.50 Cal
.54 Cal
.58 Cal
.45 Cal
.50 Cal
.54 Cal
.58 Cal
A
LO DI
49
LU
NG
SO
Thread
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
S
incl; .22-.26 cal. 30” rod, rifle patch holder, patches,
PSBG1
N
Three Piece Stainless Steel Cleaning Rods
For Calibres:
.22 Centrefire - .25 Cal.
RE
One Piece Stainless Steel Cleaning Rods
PS3622 . . . . . . .Rifle .22 - .26 cal. 36”
PS4222 . . . . . . .Rifle .22 - .26 cal. 42”
PS3627 . . . . . . .Rifle .27 cal. & up 36”
PS4227 . . . . . . .Rifle .27 cal. & up 42”
PS3217 . . . . . . .Rifle .17 cal. 32 ⁄” includes jag
PS3817 . . . . . . .Rifle .17 cal. 38 ⁄” includes jag
PS35SG. . . . . . .Shotgun 410 gauge - 10 gauge 35”
PS30SG. . . . . . .Shotgun 410 gauge - 10 gauge 30”
PS48BP . . . . . . .Black Powder 48”
TIO
PAST SPORTING
“The Fastest Way to Improve
Your Shooting™”.
The PAST Field Shield is designed with
the field shooter in mind. Lightweight,
patented foam recoil system is designed to
allow quick and easy gun mounting in the
field, yet provide valuable protection from
unwanted recoil. Ambidextrous.
PT350010 . . . . . . . . Field Shield
The original PAST Magnum Shield
is designed to provide vital recoil protection while sighting in your rifle, or
doing bench rest shooting. Excellent
protection for mid-range centrefire rifles.
Ambidextrous. Recommended for calibres up to 7mm/.300 Win. Mag.
Recoil Shields
Mag-Plus™, Flinch Minus.
The PAST Mag-Plus™ Shield provides
the same recoil protection as the Magnum
Shield, but the heart shaped design provides additional protection for the upper
arm and creates more surface area to dissipate recoil energy better ! Ambidextrous.
PT310010 . . . . . . . . Mag Plus Shield
PT300010 . . . . . . . . Magnum Shield
The PAST Super Mag Plus Shield has
the same quality construction as all
PAST shields, but is designed to tame
the real shoulder thumpers like the .416
Rigby and cartridges such as the .470
N.E.. Available in right or left hand
models.
PT330110 . . .Super Mag Plus (R Hand)
PT330120 . . .Super Mag Plus (L Hand)
The PAST Heraean Shield is
designed to give women shooters
a customised competitive edge.
Worn under clothing, this patented recoil protection has a comfortable cotton blend cover that
stays in place with it’s hook and
loop closure system. Lightweight,
yet protects. Ambidextrous.
PT360000 . . . . . . Heraean Shield
S
N
SO
50
PT512424 . . . . . . . . . Stock Protector
A rod rack to prevent your prized cleaning
rods from damage when not in use. Rigid
plastic moulding easily fixes to wall with
recesses for up to six rods. Will suit most
types of rod handles.
PT796300 . . . . . . . . . . . Rod Rack
TIP615726 . . . . . . . . . . . . . . Gun Vise
A
LO DI
LU
The PAST Stock Protector prevents spilt
solvents and oils from damaging your
rifle stock. Outer nylon material with soft
brushed cotton on interior.
PT320110 . . .Black Powder Shield (RH)
PT320120 . . .Black Powder Shield (LH)
NG
RE
A Gun Vise impervious to oils and solvents, ideal
for gun maintenance. This one piece moulded plastic
vise is designed for use with rifles and shotguns.
Features protective rubber coverings on parts contacting the firearm. Compartments for solvents/oils,
small tray for loose parts, large tray for tools/bolt
and a rod rack. Not a shooting rest. Rifle stock not
included.
The PAST Black Powder Shield is a
must for the serious black powder shooter, especially when shooting rifles with a
crescent buttplate. Works well for bench
rest shooting and general sighting-in.
Available in right and left hand models.
TIO
J. Dewey Mfg. Co., Inc.
Gun Cleaning Products
for the Discriminating Shooter
Rifle Bore Cleaning Brushes
We have used Dewey
coated cleaning rods
for years. We feel they
are some of the best
rods available and a
good value for shooters. All Dewey rods are
one piece spring steel,
equipped with ball
bearing handles, and
are finished with a special non-peel coating.
J DEWEY INC.
Cleaning Rods
All Dewey Bore Cleaning Brushes have bronze bristles with looped end brass
core. All brushes have standard 8-32 thread except .17 calibre (5-40 thread).
.17 CALIBRE RODS
DY17C36 . . . . . . . . . Rifle, 36 inches, 5-40 threads & includes .17 Jag
.22 CALIBRE - 6.5MM RODS
DY22C36 . . . . . . . . . Rifle, 36 inches & includes Rod Adapter
.270 CALIBRE AND UP RODS
.35 CALIBRE AND UP RODS
SHOTGUN ROD
DY34SG . . . . . . . . . Shotgun, 34 inches & Patch Loop
DY17R . . . . . . ..17 Cal.
DY22R . . . . . . ..22 Cal.
DY6R . . . . . . . ..243/6mm Cal.
DY25R . . . . . . ..25 Cal.
DY65R . . . . . . .6.5mm Cal.
DY270R. . . . . . ..270 Cal.
DY7R . . . . . . . .7mm/.284 Cal.
DY30R . . . . . . ..30/7.62mm Cal.
DY8R . . . . . . . . . . . 8mm Cal.
DY338R. . . . . . . . . . .338 Cal.
DY35R . . . . . . . . . . .35 Cal.
DY375R. . . . . . . . . . .375 Cal.
DY416R. . . . . . . . . . .416 Cal.
DY45R . . . . . . . . . . .458 Cal.
DY50R . . . . . . . . . . .50 Cal.
Rifle Cleaning Jags
CLEANING ROD STOPS
The cleaning rod stop is used towards the handle
of the rod and set so that your jag doesn’t exit the
muzzle. Ideal for short strokes when using JB bore
cleaner. Two sizes are available to fit Dewey and
Bore Tech coated rods. Small stop fits 22 cal. rods
and large fits 27 and up calibre rods.
RS12164 . . . . . .Cleaning Rod Stop, small
RS12166 . . . . . .Cleaning Rod Stop, large
Chamber Cleaning Rods
DYJ338 . . .
DYJ375 . . .
DYJ416 . . .
DYJ458 . . .
DYJ50 . . . .
.338 Cal.
.375 Cal.
.416 Cal.
.458 Cal.
.50 Cal.
100% COTTON CLEANING
PATCHES
These patches are 100% cotton flannel, napped both sides for maximum
solvent absorption and sized to fit
properly with Dewey jags and other
jags. Sizes designed for jags of wrap
design.
Calibre Application
1000
500
1000
500
500
DYM30 . . . . . . . . . . .30-.38 Cal.
DYM45 . . . . . . . . . . .400 - .450 Cal.
Rod Accessories
Rod adapters ideal for Parker Hale cleaning rods
DYSMBA . . . . .Small Brass Brush Adapter
DYLGBA . . . . .Large Brass Brush Adapter
Accessories for female threaded rods, 8-32 thread
except where noted. Ideal for JB compound use.
DY17L . . . . . . . . .17 Cal. Brass Loop, 5-40 thread
DYJ17M . . . . . . .17 Cal. Brass Jag, 5-40 thread
DYJ22M . . . . . . .22 Cal. Brass Jag
DYJ6M . . . . . . . .24-6.5mm Brass Jag
DYJ270M . . . . . .27-7mm Brass Jag
DYJ30M . . . . . . .30-.35 Brass Jag
SO
A
LO DI
51
LU
NG
RE
.17 thru .22 calibre
.22 Centrefire
Oversize .22 to 6mm
.22 to .27 calibre
6mm to .27 calibre
Qty
DYM17 . . . . . . ..17 Cal.
DYM22 . . . . . . ..22-.270 Cal.
S
Cotton Cleaning Patches
Dewey mops are 100% cotton with solid twists and cores. These mops are
used for removing excess solvents from the chamber and bore and can be
used to apply protective lubrication to the bore. All mops are standard 8-32
thread except .17 calibre (5-40 thread).
N
DYCHR. . . . . . . . . . Rifle Chamber Tool 9-1/2” with fixed handle
DYCHS . . . . . . . . . . Shotgun Chamber Tool 9-1/2” with fixed handle
DY341000 . . . . . . 3/4” Square
DY114500 . . . . . . 1-1/4” Round
DY1381000 . . . . . 1-3/8” Square
DY112500 . . . . . . 1-1/2” Round
DY134500 . . . . . . 1-3/4” Square
DYJ17 . . . . . .17 Cal.
DYJ22 . . . . . .22 Cal.
DYJ6 . . . . . . .243/6mm
DYJ270 . . . . .270/7mm
DYJ30 . . . . . .30 Cal.
Rifle Cotton Bore Mops
The Dewey Chamber tool
is ideal for cleaning and
drying the chamber of your
rifle. This can be done by
either attaching a brush or
cotton mop with an O.D.
larger than the cartridge.
Be sure the chamber is free
from solvents and oils before shooting.
Size
Dewey brass jags are designed to pierce the patch but
can also be used as a wrap style jag. All jags are standard 8-32 thread except .17 calibre (5-40 thread).
TIO
SHOOTER’S CHOICE
Cleaning Products
RUST INHIBITORS AND LUBRICANTS
SOLVENTS
Shooter’s Choice High Tech Grease - This all weather synthetic grease
lubricant comes in a syringe. It is excellent on all sliding surfaces such as
locking lugs and sliding mechanisms. Eliminates wear on locking lugs.
SCGC10CC . . . . . . Shooter’s Choice High Tech Grease, 10cc
Shooter’s Choice MC#7 Bore Cleaner and Conditioner - Available in
4oz. and 16oz. jars. This is the one of the best bore cleaning solvents we have
used yet. Formulated to remove lead, powder and shotgun wad fouling easily.
It removes copper fouling without being abrasive. Can be used on brushes
and turns patches a distinct blue colour for easy identification of copper
fouling.
SCMC704 . . . . . . . . Shooter’s Choice MC#7, 4oz.
SCMC716 . . . . . . . . Shooter’s Choice MC#7, 16oz.
Shooter’s Choice Copper Remover - Extra strength copper remover specifically aimed at removing copper fouling that normal cleaning won’t remove.
Non abrasive.
SCCRS08 . . . . . . . . Shooter’s Choice Copper Remover, 8oz.
Solvent Bottle - This 4 oz. solvent bottle is made of high density polyethylene with a fluoride coating. It will resist the strongest ammonia or oil based
products without softening or breaking down. A flip top cap and a solid cap
with a liner is included with each bottle. 4 oz. capacity, 5” x 1⁄” in diameter.
RS12114 . . . . . . . . . Solvent Bottle with Spout
SPECIALTY CLEANERS
Shooter’s Choice Rust Prevent - This rust preventative is one that really
works. It’s ideal for spraying down rifles inside and out and can be used on
machinery, garden tools, vehicle parts etc. This rust inhibitor really works
great !
SCRP006 . . . . . . . . Shooter’s Choice Rust Prevent, 6oz.
Shooter’s Choice Firepower 10 - This Shooter’s Choice high tech lubricant
is designed to reduce friction. It contains a metal treatment additive that
actually seals the metal surface.
SCFPL04 . . . . . . . . Shooter’s Choice Firepower 10, 4oz.
KANO KROIL
This amazing chemical lubricant has
been the Benchrest shooter’s secret to
cleaning the bore of their match grade
barrels. Mixed in a solution of 1 part
Kroil with 2 parts Shooter’s Choice
MC#7 Bore Cleaner and Conditioner
you will have one of the best cleaning
combinations.
The Shooter’s Choice is a non abrasive
solvent and removes carbon, powder
and copper while conditioning the bore
to resist fouling. Kroil creeps into millionth of an inch spaces and dissolves
grease and carbon and breaks the bond of rust and supplies the necessary
lubrication.
KL12118 . . . . . . . . . KROIL, 8oz. can
J B™ Compound
Shooter’s Choice Quickscrub II - This de-greaser and cleaner can be
used on firearms to remove dirt, oil, grease, powder build-up and fouling.
Remember to spray or wipe down your equipment with a rust preventative
afterwards because this product leaves the metal squeaky clean.
SCDG18 . . . . . . . . . Shooter’s Choice Quickscrub II, 18oz. aerosol
Shooter’s Choice Lead Remover - This product is designed primarily to
remove lead fouling. Great in Shotguns and .22 rimfire rifles.
SCLRS04 . . . . . . . . Shooter’s Choice Lead Remover, 4oz.
JB10002 . . . . . .JB Compound
A
LO DI
S
N
SO
52
LU
NG
RE
Shooter’s Choice Black Powder Gel - This product is designed to remove
lead and powder from black powder rifles and is a gel instead of a liquid.
SCBPS04 . . . . . . . . Shooter’s Choice Black Powder Gel, 4oz.
J B™ Bore Cleaner - This time proven
formula developed by Jim Brobst has been
getting caked-in-powder residue and copper jacket fouling out of barrels for more
than 30 years. It is non-embedding, which
means it doesn’t get “stuck” in the pores of
the barrel. Great to use if you are shooting
moly coated bullets. 2 oz.
TIO
Cleaning and Lubricants
CLEANING
CASE TUMBLERS AND MEDIA
LUBRICANTS
This Case Tumbler offers you all
the features of the more expensive
tumblers without compromise
and price tag. Large 10” bowl can
accommodate 350 .223 cases. Ball
bearing motors and built-in bowl
ribs provide long life, increased
strength and powerful cleaning
action.
FA794026 . . . . .Case Tumbler
Hornady
One Shot
Imperial Sizing
Die Wax
Imperial Dry Case
Neck Lube
RCBS
Case Slick™
Hornady One Shot — Lube entire blocks of cases in one shot. Your cases
are dry and ready to resize in only minutes. One Shot™ is a non-petroleum
product that will not contaminate powder or primers.
HRN9991 . . . . . . . . Hornady One Shot™
Corn Media
Walnut Media
“Which one is better?” In general, due to the nature of the granules, corn
is a better cleaner and walnut is a better polisher. The first thing we do with
fired brass is clean it with corn. This removes the dirt, grit from the cases so
they can be inspected and started through the reloading process. Once the
brass has been re-sized and de-primed, we polish it with walnut as a separate
operation. This will ensure any polishing grit left on the case will not get into
your seating die. Media does not wear out but becomes saturated with case
lube and dirt and should be replaced periodically for optimum performance.
For best results add brass polish.
RS794105
RS794110
RS794205
RS794210
. . . . . . . . Corn Cob Media, 5 lbs. Untreated
. . . . . . . . Corn Cob Media, 10 lbs. Untreated
. . . . . . . . Walnut Media, 5 lbs. Untreated
. . . . . . . . Walnut Media, 10 lbs. Untreated
Ammonia-Free Brass Polish
The perfect additive for corn or walnut media to help remove
grime, lubricant, oils and stains from dirty cases.
RS541217 . . . . . . . . Brass Polish, 8 oz. treats approx 16 lbs.
RS541220 . . . . . . . . Brass Polish, 16 oz. treats approx 64 lbs.
Imperial Sizing Die Wax — Now in its second decade of making the job of
resizing and reforming easier for the shooting sportsman, its high lubricity
and ease of removal make the wax effective and easy to remove. Used very,
very sparingly in operation it is most economical. One can resize a 30-06 case
down to 22-250 in one operation. It can. It can tame the most troublesome
of wildcat cartridges.. Removal of the wax is a simple operation, just wipe
down with a paper towel.
IMPSD1 . . . . . . . . . Imperial Sizing Die Wax, 1 oz.
IMPSD2 . . . . . . . . . Imperial Sizing Die Wax, 2 oz.
Imperial Dry Case Neck Lube — This product has a graphite base and is
designed to reduce chatter and drag of the cartridge case neck within the sizing die. Furthermore, since it is a dry lube, it prevents the possible contamination of the powder by oils or waxes. Also it prevents build up of Sizing
Die Wax on the shoulder sizing area of the sizing die itself, which can lead to
dents in the shoulder of the cartridge.
IMPDN1 . . . . . . . . . Imperial Dry Case Neck Lube, 1 oz.
Lee Resizing Lube — This lubricant is pleasant to handle
and you can thin it with water. Non-sticky, non-allergenic.
Very little is needed and it goes a long way. Eliminates stuck
and dented cases and makes sizing less work.
LEE90006 . . . . . . . . Lee Resizing Lubricant, 2 oz.
One Stop Gun Care !
SHOOTER’S RANGE BOX
Think of the best tackle box you’ve ever owned. Remember how it kept
everything right at your fingertips and ready to go ?
The Range Box is the result of hundreds of hours of designing and testing
and is an accessory no shooter should be without. Whether you’re a target
shooter spending hours on the range or just a hunter shooting only a couple
of hundred rounds a year, this is the perfect accessory box to transport all
your equipment to the field.
These Range Boxes are tough, portable, versatile, convenient; they keep
everything you need under one lid. They are truly a “One Stop Gun Care
Shop”. Each Range Box comes with a removable Cleaning Kit Case, compartmentalized storage case and rubber coated cradles to securely hold your
firearm for cleaning.
Dimensions: Closed — 22” Long x 11⁄” Wide x 11⁄” Tall. Open — 5⁄”
Tall.
S
53
LU
N
SO
A
LO DI
NG
RE
TIP458509 . . . . . . . Range Box w/Empty Cleaning Kit
TIO
HORNADY
Reloading Tools
LOCK-N-LOAD
BUSHING SYSTEM
HAND-HELD
PRIMING TOOL
The Hornady Hand Priming tool will
quickly become the handiest tool on
your reloading bench. Unlike other
brands the Hornady hand-held priming
tool works just like a pair of pliers.
Due to its simple design primers automatically flow from the primer tray to
the feeding system as the tool is being
used. This ensures a positive prime each
time and virtually eliminates the chance
of a jam. Engineered to be easy to use,
this new hand-held priming tool should
provide a lifetime of hassle free, and
pinch free priming. Uses most brands of
universal shellholders.
The Lock-N-Load concept is based on
the positive locking action principle
of the bolt action rifle. Just like a
bolt action rifle, the locking action of
this Lock-N-Load system is incredibly strong and simple. Once dies are
adjusted for loading, these setting are
locked in place on the die bushing
with the die’s lock ring. By keeping
the die in the bushing, it remains set
for future loading and removal with
a simple twist. The bushings are also
completely reusable: remove a die
and you can use the bushing with
any other regular die. No additional
bushings are necessary. Some other
brands of reloading press can be
converted to the Lock-N-Load
quick change bushing system
by the use of a conversion
bushing.
HRN050002 . . . . . . . . . Hand-Held Priming Tool
HRN050003 . . . . . . . . . Priming Tool Stand
Hornady Universal Shellholders
Hornady universal shellholders are precision machined from solid steel and
then heat treated to perform flawlessly for the life of the press. They will also
fit most other brands of tools that require the use of a shellholder.
HRN390541
HRN390542
HRN390543
HRN390544
HRN390545
HRN390546
HRN390551
HRN390554
HRN390556
HRN390559
HRN390570
HRN390578
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
Shellholder No.1
Shellholder No.2
Shellholder No.3
Shellholder No.4
Shellholder No.5
Shellholder No.6
Shellholder No.11
Shellholder No.14
Shellholder No.16
Shellholder No.19
Shellholder No.30
Shellholder No.38
Specify cartridge when
ordering.
Lock-N-Load Press
Conversion Bushing
Powder Funnel and .17 Adapter
Powder Funnel — Fits all cartridges from .22
to .45 calibre. Anti-static treatment eliminates
powder sticking. Tapered-tube design reduces
powder spills.
HRN586050 . . . . . . . . . Powder Funnel .22 - .45 calibre
HRN044094
HRN044093
HRN044095
HRN044099
Funnel Adapter — .17 Calibre
Fits on the end of the Hornady Powder Funnel to prevent spills when
dispensing powder in the ultra small neck of .17 calibre cases. Funnel
sold separately.
HRN586055 . . . . . . . . . Funnel Adapter - .17 calibre
RCBS TYPE EXPANDER SPINDLE ASSEMBLY
Improve the ease and convenience of your RCBS sizing die
by replacing the spindle assembly with a Hornady Carbide
Expander Spindle Assembly.
Provides chatter free neck
expansion while reducing the
need for neck lubrication.
A
LO DI
S
N
SO
54
LU
Bullet Dia.
.172” . . . . . HRN392154
.223” . . . . . HRN392155
.243” . . . . . HRN392156
Collet No.
No. 4
No. 5
No. 6
No. 7
Bullet Dia.
.260” . . . . .
.277” . . . . .
.284 . . . . . .
.308` . . . . .
HRN392157
HRN392158
HRN392159
HRN392160
HRN044691
HRN044692
HRN044693
HRN044694
HRN044695
HRN044697
.........
.........
.........
.........
.........
.........
.223 Rem, .222 Rem, .220 Swift
.243 Win, 6mm Rem
.257 Roberts, .25-06 Rem
6.5x55 Swed, 6.5 Mann.
.270 Win, .270 Wby, 7x57 Msr, 7mm Rem Mag
.308 Win, .30-06 Spg, .300 Win Mag
NG
RE
Collet No.
No. 1
No. 2
No. 3
Lock-N-Load Die
Bushings 3-Pak
. . . . . . . . . . . . . . . . . . . . . . . Die Bushings (2-Pack)
. . . . . . . . . . . . . . . . . . . . . . . Die Bushings (3-Pack)
. . . . . . . . . . . . . . . . . . . . . . . Press Conversion Bushing
. . . . . . . . . . . . . . . . . . . . . . . Press Conversion Kit
includes one Die Bushing 3pack and one Conversion
Bushing (not shown)
CAM-LOCK BULLET PULLER
The fastest, easiest way yet to pull bullets
with a press. Just clamp down and the
bullet is out. Will work with standard
collets (sold separately).
HRN050095 . . . . . . Cam-Lock Bullet Puller
Lock-N-Load Die
Bushings 2-Pak
TIO
Reloading Tools
LYMAN
MICROMETERS
CASE TRIMMERS
Metallic cartridge cases will stretch after several uses. That’s why for both
safety and longer cartridge life, it is advisable and necessary to trim the case
back to its original length. Trimming will assure that the cartridge will chamber properly and increase its accuracy when fired. The unique and patented
Universal Chuckhead system from Lyman eliminates the need for collets to
hold different calibre cases. With Lyman trimmers, you can trim any size case
from .17 on up to .458, quickly and easily. To change calibres, simply change
the pilot.
Universal Trimmer
After obtaining a quality caliper, the next precision instrument a reloader
will require is a good 1” micrometer. The micrometer will allow the reloader
to accurately measure the diameter of bullets and cartridges.
Electronic Micrometer
Lyman’s Electronic Digital Micrometer is the ideal tool for the avid reloader.
This technologically advanced Mic reads to .0001” on a high contrast LCD.
Converts from inches to millimetres. Zero reset allows parts sorting by plus
and minus variations.
It is powered by a standard calculator battery and has friction thimbles and
a spindle lock. Wooden case is included.
Lyman’s Universal trimmer features the patented Universal Chuckhead
which handles any case from .17 calibre to .458 calibre. No costly collets
required! Features coarse and fine adjustments. Adjusting ring lets you “dial
in to an approximate setting for quick repeatability”. Includes 9 of the most
popular pilots.
LY7862000 . . . . . . . . . . Universal Trimmer
LY7832237 . . . . . . . . . . Electronic Micrometer
Reloader’s Digital Micrometer
Lyman’s Digital Micrometer has an “easy to read” digital display, accurate
to .0001”. Features friction thimble for consistent measurements and spindle
lock to hold setting. Includes padded wooden storage box.
LY7832234 . . . . . . . . . . Digital Micrometer
AccuTrimmer
Reloader’s 1” Micrometer
Traditional vernier micrometer offers precision at an affordable price. Reads
to .0001” on a vernier scale. With spindle lock and friction thimble. Padded
wooden storage box included.
LY7832230 . . . . . . . . . . Reloader’s 1” Micrometer
TOOLS AND ACCESSORIES
Compact Driver Kit
Ideal for Boat, Car and Home Use.
The Compact Driver Kit includes the Stubby Ratchet Screwdriver, new Mini
Magdriver Screwdriver and a fold up Hex Key Set. Packaged in a rugged,
latchable plastic storage kit. The kit services 20 heads that include 8 hex, 9
slotted and 3 phillips heads (one long shank which is perfect for recoil pad
use). All Lyman bits are specially hardened industrial grade and interchangeable with the popular Magdriver.
tool for those closeup, delicate jobs.
The MiniMagdriver comes with five bits - three slotted and two phillips
heads - and a handy storage pouch. All bits are specially hardened, industrial
grade.
LY7631285 . . . . . . . Mini Magdriver Screwdriver
Lyman Magdriver “The Portable Gunsmith”
A specially designed screwdriver to handle most gunsmithing applications.
Unique storage handle contains all seven specially selected, hollow ground
bits. Magnetic tip provides quick, easy bit changes and aids in the handling
of small screws.
LY7031249 . . . . . . . Magdriver
SO
A
LO DI
55
LU
NG
RE
LY7031283 . . . . . . . . . . Compact Kit Complete
Mini Magdriver Screwdriver
With its reduced size, this little brother
of the popular Magdriver is the perfect
S
LY7862210 . . . . . . . . . . AccuTrimmer Multi-Pack
N
Economy without the loss of quality.
Lyman innovation at an affordable price. Trims cases .17 through .458 Win
Mag. Uses standard shellholders to position cartridge and standard Lyman
cutter heads and pilots. Available with Lyman’s popular nine Pilot MultiPack.
Stubby Ratchet
This Stubby Ratchet fills the need for a
small versatile high performance screwdriver that works in places that standard
drivers won’t fit at an affordable price.
Each stubby includes a complete ratchet
and bit caddy and 5 industrial hardened
bits (three phillips, two blade). The
reversible, quick change heads lets you
drive or retract with ease.
LY7031275 . . . . Stubby Ratchet
TIO
Accessories
ACCESSORIES
EJS KWICK CASE TRIMMER
LEUPOLD LENS CLEANING SYSTEM
The Kwick Case trimmer differs from most case trimmers in that it indexes
from the datum of the cartridge case shoulder in the same manner as a headspace gauge. This eliminates the need for shellholders and pilots, speeds up
the trimming process and enables the tool to be used by hand. By inserting
the Kick Case trimmer into a Deburring Tool Holder (item RS00005, see
page 65 ) you can trim under power.
EJS12015
EJS12017
EJS12019
EJS12021
EJS12023
. . . . . . . . 17 Rem, 222 Rem, 223 Rem ....
. . . . . . . . 22-250 Rem
. . . . . . . . 243, 7mm-08, 308
. . . . . . . . 270, 280, 30-06
. . . . . . . . 7mm Rem Mag, 300 Win Mag
This compact, two-step lens cleaning system has a natural hair brush, which
remains fully-enclosed and protected from contamination when not in use.
It’s important that the brush remains clean, because it’s the first thing to
touch the lens. The micro-fibre cleaning tip automatically replenishes itself
with a state-of-the-art cleaning compound. The ergonomic design of this
system is superior to competitive products.
LP52100 . . . . . . . . . Lens Cleaning System
SMARTER™ POWDER FUNNEL KIT
SNIPER’S CHEEKPIECE
The SMARTER™ Powder Funnel Kit with 16 quick-change calibre specific
drop tube nozzles and clear drop tube extension is one funnel kit you can’t
do without. It’s so smart you only need one hand to use it !
Meticulously designed with an innovative system of calibre specific nozzles,
the SMARTER™ Powder Funnel ensures precise alignment of case and
funnel, and is so well-balanced that it doesn’t need to be supported while
pouring powder. Each snap-in nozzle fits a specific family of calibres, 16 in
all. The clear drop tube extension guarantees one-pour loading of even the
biggest of calibres. Innovative, easy-to-use and well designed. Hey, it’s just
smarter !
FA832516 . . . . . . . . SMARTER™ Powder Funnel Kit
ACTION/CHAMBER CLEANING TOOL SET
A
LO DI
LU
S
N
SO
56
NG
RE
Benchrest shooters have long recognised the importance of cleaning the
chamber and action areas in order to optimise performance from their
firearms. Enough build-up of fouling in the lug recesses will render the
gun useless. This Action/Chamber Cleaning Tool Set cleans grit from the
bolt lug recesses and the bolt raceways in the action. Set includes: Action
Cleaning Tool and 10 swabs, Chamber Cleaning Tool and 2 mops (one for
223 Remington and cases of similar diameter and one for 22-250 Remington
diameter and up) and a general purpose nylon brush.
For additional supplies of mops and brushes refer to pages for Pro-Shot
Products and Dewey Mfg.
TIO
Most rifles and shotguns are still designed on iron sights yet 95% of shooters now prefer to use telescopic sights that require the eye line to be raised
some 1-⁄ inches/35 mm above the average firearm. In effect preventing the
shooter from shooting consistently. Once correctly fitted the cheekpiece will
ensure that when the firearm is brought up to the shoulder, it will allow the
shooter to position his eye in the same position every time.
This will speed up target acquisition and make the firearm more comfortable
to shoot. After all, your firearm which may be an out of the box rifle, will
not fit all shooters in the same. The patented contoured pads ensure that the
cheekpiece will automatically fit the jaw and cheek of the shooter, not only
this but by moving the pad back and forth the pads will raise or lower the
eye to the correct level for your firearm scope combination. When set this
should provide perfect eye relief every time the firearm is brought into the
shooting position. Elasticated loops on the reverse of the cheek piece hold
up to 7 rounds of ammunition.
Available in right and left handed version. Black or Olive Green.
RS90705
RS90706
RS90707
RS90708
. . . . . . . . . Sniper’s Cheekpiece, RH, Black
. . . . . . . . . Sniper’s Cheekpiece, RH, Green
. . . . . . . . . Sniper’s Cheekpiece, LH, Black
. . . . . . . . . Sniper’s Cheekpiece, LH, Green
MY109658 . . . . . . Action/Chamber Cleaning Tool Set
Accessories
HART ACCURACY ASSET
This accessory is for shooters who want to apply the benefits of flat-bottomed benchrest stocks to their sporter or hunting rifle forends. It consists of
a plate with side brackets to cradle your forend, eliminating the rolling movements that you get with rounded forends. The saddle attaches to your forend
in place of your sling swivel or forend screw. The cradle’s mating surface is a
non-maring material to protect the finish of your stock. Easily removable so
you can use your rifle for offhand use. Width of this accessory is 3.5”. Will
not work on a #3 Protektor bag.
RH75000 . . . . . . . . . . . . Hart Accuracy Asset
WOODEN LOADING BLOCKS
ACCESSORIES
STACK-ON BENCH ORGANIZER
This handy 12 bin
organizer is perfect for
your reloading bench
or wall in your reloading room. All bins are
fully separated with
a clear lift up cover
that keeps the contents visible but clean. Great for storing cleaning brushes,
patches, small parts, scope rings, etc...
Measures: 14-3/8”W x 5”D x 18-1/2”H.
ST90000 . . . . . . . . . . . . 12 Bin Bench Organizer
CHAPMAN SCREWDRIVER KITS
These hardwood loading blocks designed to fit specific cases you reload so
your cases stay in place when loading. Beware of the universal loading block.
MY792230 . . . . . . . Wooden Loading Block No.5
Suitable for 22-250, 243, 6mm Rem, 25-06, 270 Win
280 Rem, 7x57 Mauser, 220 Swift
Suitable for Popular belted Magnums except big Wthby
Suitable for 45-70, 378 Wby, 460 Wby, 416 Rigby
GAMMON STOCK BOOTS
Kit 8900
Kit 9600
Adapter Pack G
Packaged in pocket sized (4-1/2” x 6-1/2”) Polyethylene cases, these unique
Chapman sets cover an amazing range of screw driver sizes and applications.
Eliminating the need for a bench full of standard units, each part is arranged
by order of its size and nests in its own individual compartment affording speedy, one hand, selection of parts. To ensure the proper tool for the
job, Chapman offers a selection of 2 gun screwdriver kits and a companion
Adapter Pack G. An easy to read instruction booklet is included in each kit.
Chapman adapters are constructed of the finest quality Chrome Nickel
Molybdenum Alloy Steel and precision made to insure proper fit. Slotted
adapters have parallel sides (not tapered) affording optimum bite. In addition
to all standard ball-detents and stops, the handle and extension are equipped
with set screws allowing permanent set-up, if desired. Having a working
torque strength of 200 inch pounds, the Midget Ratchet easily drives slotted,
phillips or Hex type screws.
CHP8900 . . . . . . . . . . . 8900 Screwdriver Kit
CHP9600 . . . . . . . . . . . 9600 Screwdriver Kit
CHP9900 . . . . . . . . . . . Adapter Pack G
TASCO SHOTSAVER
TA3035E Tasco Shotsaver/Spud Set Combo
S
57
LU
N
SO
A
LO DI
NG
GA10010 . . . . . . . . . Gammon Stock Boot, Navy Blue
GA10011 . . . . . . . . . Gammon Stock Boot, Green
GA10012 . . . . . . . . . Gammon Stock Boot, Red
GA10013 . . . . . . . . . Gammon Stock Boot, Burgundy
RE
This protective stock boot made by our friend Bill Gammon is a quality
product essential while cleaning your rifle. We use it every time we clean.
The stock boot is of a two layer construction with a padded cloth exterior
to absorb any spilled or dripped solvents and a vinyl interior to prevent any
solvents from penetrating the cloth and getting through to the stock. Fastens
with velcro around pistol grip.
Provides fast and accurate sighting-in without a time consuming trip to the
range or added cost of expended ammunition. Gives hunters and target
shooters the convenience of initial sight-in of rifle scopes, or rifle iron-sights
without having to fire a shot. Kit includes the optical device plus a selection
of 15 most commonly used bore spuds all packaged in a
padded vinyl storage case with velcro closure.
Includes .17, .22, 6mm, .25, 6.5mm, .270,
7mm, .30, 8mm, .338, .35, .375, .44, .45 and
.50 calibre bore spuds.
TIO
BUTLER CREEK
Scope Accessories
SCOPE
COVERS
FLIP-OPEN™ SCOPE COVERS
FLIP-OPEN™
SCOPE
COVERS
CUSTOM FITTED FOR
MAXIMUM PROTECTION
Butler Creek’s “instant action”
scope covers have been the
number one choice of serious
shooters and hunters worldwide
for over 20 years. “Quiet Open”
lids open at the touch of your
thumbs. The ergonomically
designed red button directs your
thumb pressure correctly without
ever looking.
Flip-Open Scope Covers
MEASURE THE OUTSIDE DIAMETER OF THE EYE AND OBJECTIVE ENDS OF THE SCOPE
FIT RANGE IS .01 UNDER TO .025 OVER THESE MEASUREMENTS
SZ
02
03A
01
03
05
07
09
09A
10
11
13
14
15
16
17
18
19
20
21
EYE PIECE
INCHES
1.225
1.300
1.341
1.388
1.432
1.457
1.468
1.485
1.516
1.550
1.570
1.605
1.66x1.45
1.660
1.675
1.700
1.730
1.775
1.70x1.42
(mm)
31.1
33.0
34.1
35.3
36.4
37.0
37.3
37.7
38.5
39.4
39.9
40.8
42.2x36.8
42.2
42.5
43.2
43.9
45.1
43.2x36.1
SZ
01
04
02A
02
03A
03
05
07
09
10
11
12
13
15
17
19
20
21
23
25
OBJECTIVE
INCHES
1.000
1.095
1.181
1.221
1.300
1.34
1.387
1.429
1.485
1.500
1.54x1.34
1.76x1.53
1.530
1.558
1.612
1.646
1.700
1.735
1.760
1.800
(mm)
25.4
27.8
30.0
31.0
33.0
34.0
35.2
36.3
37.7
38.1
39.1x34.0
44.7x38.9
38.9
39.6
40.9
41.8
43.2
44.1
44.7
45.7
SZ
26
27
28
29
30
31
33
34
39
40
43
44
45
46
47
48
51
53
53A
54
OBJECTIVE
INCHES
1.820
1.840
1.890
1.918
1.960
1.998
2.043
2.100
2.220
2.250
2.310
2.360
2.410
2.430
2.461
2.500
2.575
2.600
2.640
2.725
(mm)
46.2
46.7
48.0
48.7
49.8
50.7
51.9
53.3
56.4
57.2
58.7
59.9
61.2
61.7
62.5
63.5
65.4
66.0
67.1
69.2
Inner O-ring
provides an
airtight seal to
keep out dust
and moisture.
The watertight friction mount
anchors the covers securely to
the scope while an airtight semiO ring seals out dust and moisture to protect expensive optics.
Spring activated lids pop open
at the touch of a thumb and
perform flawlessly under severe
weather conditions and extreme
temperatures ranging from
+120° to -40°. FLIP-OPEN covers weigh less than an ounce and
are manufactured in sizes to fit
various brands and models of
scopes. Their design serves both
right or left-handed shooters.
Silent action hinge provides ﬂawless performance in all weather.
NEW ergonomic button design
has a non-slip surface for onetouch action.
A
LO DI
S
N
SO
58
LU
NG
RE
Order by quoting
EYE and OBJECTIVE product #’s
from opposite page.
TIO
SCOPE COVER SIZE CHART
28
21
40
16
44
11
11
11
14
11
11
11
28
03
10
28
40
40
40
14
14
11
44
40
40
11
11
11
03
11
11
11
11
14
11
11
11
11
10
20
30
04
04
04
10
20
28
40
40
30
30
BAUSCH & LOMB
FLIP-OPEN
EYE OBJ
ELITE 4000
10 X 40
1.5-6 X 36
2.5-10 X 40
36 X 40 AO
6-24 X 40 AO
1.5-6 X 40
4-16 X 50
ELITE 3000
1.5-4.5 X 32
1.5-6 X 42
2-7 X 32
3-9 X 40
3-9 X 50
4-12 X 40 AO
5-15 X 50
LEUPOLD
31
25
29
33
33
25
46
09A
09A
09A
09A
09A
09A
09A
15
15
15
28
44
33
46
FLIP-OPEN
EYE OBJ
11
---11
11
---11
11
11
11
11
11
11
11
11
11
11
11
11
01
---15
19
---31
43
26
26
47
43
43
31
47
43
31
43
31
11
11
11
11
11
11
11
01
15
26
30
43
26
30
11
11
30
30
17
17
17
11
30
30
30
26
20
20
17
46
1.5-6 X 42
2.5-10 X 42
2.5-10 X 56
1” RIFLESCOPES
3-10 X 42
3-9 X 36
6 X 32
17
17
13
28
19
10
WEAVER
NIGHTFORCE
FLIP-OPEN
EYE OBJ
3.5-15 X 56 AO
5.5-22 X 56 AO
8-32 X 56 AO
12-42 X 56 AO
NSX
3.5-13 X 50
3.5-15 X 56
5.5-22 X 56
13
13
13
13
53A
53A
53A
53A
FIXED POWER
K2.5
K4
K6
KT15
VARIABLES
V3, 1-3 X 25
V9, 3-9, 2-10 X 38
V16
V10, 2-10, 3-9 X 50
TARGET
T-36, T-24, T-16, T-10
NIKON
17
17
27
27
09A
09A
09A
09
09A
09A
27
13
27
40
33
34
REDFIELD
ULTIMATE ILLUMINATOR
3-9
3-12
VARMINT
6-24 X 50 AO
ILLUMINATOR
4 (WIDEFIELD)
2-7 (WIDEFIELD)
3-9
3-10 X 50
FLIP-OPEN
EYE OBJ
11
11
51
53A
11
48
15
15
15
15
17
17
28
43
SCHMIDT & BENDER
RIFLESCOPES
4 X 36
6 X 42
8 X 56
1.25-4 X 20
POLICE/MARKSMAN
1.5-6 X 42
2.5-10 X 56
3-12 X 42
3-12 X 50
10 X 42
6 X 42
FLIP-OPEN
EYE OBJ
09A
10
09A
10
15
28
46
02A
10
10
10
10
15
11
28
46
30
40
30
30
09A
09A
09A
09A
01
25
25
33
09A
09A
09A
09A
01
25
33
40
09A 34
ZEISS
FLIP-OPEN
EYE OBJ
BUCKMASTER
4 X 40
3-9 X 40
MONARCH
4 X 40
2-7 X 32
3-9 X 40
3.5-10 X 50
4-12 X 40 AO
6.5-20 X 44 AO
FLIP-OPEN
EYE OBJ
DIATAL-ZM/Z
6 X 42
8 X 56
DIATAL-Z/ZA
4 X 36
6 X 42
8 X 56
DIATAL-C
1.5 X 12
3-9 X 36
4 X 32
6 X 32
10 X 36
DIAVARI-ZM/Z
1.25-4 X 24
1.5-6 X 42
3-12 X 56
2.5-10 X 48
DIAVARI-Z/ZA
1.5-6 X 42
2.5-10 X 52
DIAVARI-C
1.5-4.5 X 18
3-9 X 36
BCK20010
BCK20020
BCK20030
BCK20035
BCK20050
BCK20070
BCK20090
BCK20095
BCK20100
BCK20110
BCK20130
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
FLIP-OPEN
EYE OBJ
14
14
28
46
10
10
10
7
28
46
17
17
17
17
17
1
21
19
19
28
14
14
14
14
02A
28
46
34
10
10
28
40
17
17
1
21
01 EYE
02 EYE
03A EYE
03 EYE
05 EYE
07 EYE
09 EYE
09A EYE
10 EYE
11 EYE
13 EYE
BCK20140
BCK20150
BCK20160
BCK20170
BCK20180
BCK20190
BCK20200
BCK20210
BCK30010
BCK30020
BCK30025
BCK30030
BCK30035
BCK30040
BCK30050
BCK30070
BCK30090
BCK30100
BCK30110
BCK30120
BCK30130
BCK30150
BCK30170
BCK30190
BCK30200
BCK30210
BCK30230
BCK30250
BCK30260
BCK30270
BCK30280
BCK30290
BCK30300
BCK30310
BCK30330
BCK30340
BCK30390
BCK30400
BCK30430
BCK30440
BCK30450
BCK30460
BCK30470
BCK30480
BCK30490
BCK30510
BCK30530
BCK30535
BCK30540
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
14 EYE
15 EYE
16 EYE
17 EYE
18 EYE
19 EYE
20 EYE
21 EYE
01 OBJ
02 OBJ
02A OBJ
03A OBJ
03 OBJ
04 OBJ
05 OBJ
07 OBJ
09 OBJ
10 OBJ
11 OBJ
12 OBJ
13 OBJ
15 OBJ
17 OBJ
19 OBJ
20 OBJ
21 OBJ
23 OBJ
25 OBJ
26 OBJ
27 OBJ
28 OBJ
29 OBJ
30 OBJ
31 OBJ
33 OBJ
34 OBJ
39 OBJ
40 OBJ
43 OBJ
44 OBJ
45 OBJ
46 OBJ
47 OBJ
48 OBJ
49 OBJ
51 OBJ
53A OBJ
53 OBJ
54 OBJ
POWDER POUR SPOUT
SWAROVSKI
FLIP-OPEN
EYE OBJ
HABICHT NOVA
4 X 32
14
6 X 42
17
8 X 56
17
10 X 42
13
HABICHT NOVA A-LINE
4 X 32A
14
6 X 36A
14
1.5-4.5 X 20A
17
3-9 X 36A
16
HABICHT PV (PROHUNTER)
1.25-4 X 24
16
10
28
46
28
10
19
01
19
02A
Makes loading safer and
quicker with no spills.
Functions as part funnel and
part sealing cap for powder
containers.
BCK51021
. . . IMR Pour Spout
SO
A
LO DI
59
LU
NG
RE
VARI-X III
1.5-5 X 20
1.75 X 5
1.75-6 X 32
2.5-8 X 36
2.8 X 10
3.5 X 10 AO
3.5-10 X 50
3.5-10 X 40 LR(M1)
3.5-10 X 40 LR(M3)
4.5-14 X 50 AO
4.5-14 X 50 LR TACTICAL
4.5-14 X 50 LR TARGET
4.5-14 X 40 AO
6.5-20 X 50 AO
6.5-20 X 50 LR TARGET
6.5-20 X 40 AO
6.5-20 X 50 AO
8.5-25 X 40 AO
VARI-X II
1-4 X 20
2-7 X 33
3-9 X 40
3-9 X 40 AO
3-9 X 50
4-12 X 40
6-18 X 40 AO
VARMINT
12 X 40 (M8)
6.5-20 X 40 AO
19
10
10
14
10
10
10
MARK IV
M1 10 SWAT ULTRA
M1 16
M3 6, M3 10
M3LR
LPS
1.5-6 X 42
3.5-14 X 52 AO
FLIP-OPEN
EYE OBJ
17
28
17
28
17
46
S
16
16
16
SWAROVSKI Contd.
FLIP-OPEN
EYE OBJ
BUTLER CREEK
ELECTRO DOT
3-9 X 40
3-9 X 38
6-24 X 44
BLACK DIAMOND
3-9 X 50
SIGNATURE
4&6
1.5-6
2-8
3-9
3-9 X 50
2.5-10
3-12
3-12 X 50
4-16
6-24
8-32
FULLFIELD
4
6
12
1-4 (XER)
1.75-5
1.75-5 (Posi-Lock)
2-7
3-9 & 3-9 (Posi-Lock)
3-9 X 40
3.5-10 X 50
3.5-10 X 50 (Posi-Lock)
4-12
6-18
LEUPOLD contd.
FLIP-OPEN
EYE OBJ
N
BURRIS
TIO
SLINGS &
SWIVELS
BUTLER CREEK
SLINGER™ SWIVEL & HIGHLANDER™ SLING
Slinger™ Swivel
Great looking Slinger
Swivels with double strength
U-Bar Locking System
SLEEK, STRONG AND QUIET
The Slinger Swivel is moulded of a tough and durable polymer
that will provide years of satisfied use in all weather climates
for hunting or target rifles. This innovative swivel system is
quite popular amongst hunters that have experienced it’s performance and appreciate the smooth transition between the
stock and sling. Slinger’s design and texture compliment everything from black synthetic stocks to custom wood stocks.
The patent pending “Double U-Bar” design offers excellent
strength and provides an easy to use locking system. It’s design
only requires two parts, therefore we are able to offer the
hunter or shooter a very affordable swivel. Just press down to
disengage the lock and you can push the “U-Bar” out to allow
the attachment to your “Uncle Mike’s swivel studs. Slinger
swivels are designed for all 1” rifle or shotgun slings.
BCK80080 . . . . . . . . 1” Slinger Swivel Set
Highlander™
Sling
CUSTOM GRADE PRESENTATION
The HIGHLANDER sling offers your deluxe
stocked rifle the special qualities of the Butler
Creek “Comfort Stretch System”. The attractive panels and finished edging compliment all
quality firearms. It offers a quick adjustable
system for shoulder carry and offhand shooting. The NON-SLIP GRIPPERS™ secure your
firearm snugly to your shoulder, regardless of
the synthetic material of your coat.
BCK80043 . . . . .Highlander Sling, Black
BCK80047 . . . . .Highlander Sling Mossy Oak
Closed cell neoprene
construction is soft, durable
and waterproof.
Non-Slip-Grippers™ hold
your firearms securely in place on
shoulder in any condition, no matter
what you wear.
COMFORT STRETCH™
SLINGS
RIFLE AND SHOTGUN SLINGS
Comfort Stretch™ Firearm Sling
SHOCK ABSORPTION AS YOU WALK AND STALK
The patented control
stretch design works like a shock
absorber to reduce felt weight.
The Rifle and Alaskan Magnum slings are offered in Black, Brown, Bark
Camo and the new Mossy Oak Break Up® pattern. Each are designed to be
used with either the Slinger™ or “Uncle Mike’s” QD® Quick Detachable 1”
sling swivels.
Model
Black
Camo
Brown
Mossy Oak
Rifle Sling
Shotgun Sling
Alaska Magnum
BCK80013
BCK80023
BCK80033
BCK80014
BCK80024
BCK80034
BCK80015
-------------BCK80035
BCK80017
BCK80027
BCK80037
A
LO DI
S
N
SO
60
LU
NG
RE
The Comfort Stretch Shotgun Sling is designed to be used with Shotguns or
Muzzle loaders that don’t have swivel studs installed. The top loop has quality suede sewn to protect the finish of blued or stainless barrels. The loops
just slip over the barrel and pistol grip area of the stock and cinch down. It is
an excellent way of carrying your shotgun to the blind.
TIO
Quick
Detachable
Super Swivels
UNCLE MIKE’S
QD
®
SWIVEL STUDS
WOOD SCREW BASES
Nearly all butt stocks and many fore
end swivels are mounted with wood
screw bases.
MACHINE SCREW BASES
Many bolt actions with relatively
thick fore ends can accept ⁄-inch
machine screws for an extremely
strong installation.
WOOD SCREW TYPE
QD 115 RGS
Installs without dismantling gun. ⁄” deep threaded
wood screw fore end base. See below. Set No. 1092 for
nickel-plated version.
UM1311-2 (1”)
UM1311-3 (1⁄”)
Super Swivels® are Now Quiet Swivels!
Uncle Mike’s world-renowned QD® Super Swivels® became the leading
choice among firearms manufacturers, sportsmen, and gunsmiths because
they continually refined, improved, and upgraded their already superb product.
All Super Swivels are now built using extremely close machining tolerances
to deliver a very tight fit, virtually eliminating squeaks and rattles. Quiet
Swivels retain the innovative SwiveLock®, a feature that allows the swivel
to be detached, but still provides a positive locking mechanism to enhance
safety in the field.
WOOD SCREW TYPE —
NICKEL-PLATED
QD 115 RGS — Nickel-Plated
Match the finish of bright metal rifles. ⁄-inch rear
base plus ⁄-inch fore end base.
UM1092-2 (1”)
MACHINE SCREW TYPE
QD 115
Machine screw fore end base, wood screw rear base.
Replaces many factory non-detachable swivels. 1” and
1⁄” sizes.
UM1001-2 (1”)
UM1001-3 (1⁄”)
Locked Position
Sleeve Opened
Gate Opened
MACHINE SCREW TYPE
A plunger with a knurled sleeve that functions as both a lock and swivel
release is the key to SwiveLock. When open, the plunger operates against
an internal spring to open the gate and release the swivel. Twist the sleeve to
the closed position and it locks the plunger to provide added security against
accidental opening. Pull the sleeve outward to engage the plunger threads,
press plunger and rotate gate to open.
QD 115 — Nickel-Plated
Nickel-Plated machine screw fore end base and wood
screw rear base.
UM1002-2 (1”)
UM1002-3 (1⁄”)
SUPER SWIVELS
QD SS BL
Set of two with SwiveLock feature. For rifles with
factory-installed studs, or to interchange with other
QD swivels. No studs provided. 1” and 1⁄” sizes.
UM1403-2 (1”)
UM1403-3 (1⁄”)
SWIVEL LOOP SIZES
a
SUPER SWIVELS — NICKEL-PLATED
QD SS BL — Nickel-Plated
Set of two nickel-plated QD swivels to match brushed
stainless rifles.
UM1093-2 (1”)
UM1093-3 (1⁄”)
S
61
LU
N
SO
A
LO DI
NG
RE
All QD Super Swivel set are available with 1-inch loops, and some with
1⁄ -inch loops to accommodate popular slings. If the swivels
you need are not available in
1⁄-inch set, you can select PROD#
UM14033 QD SS BL (swivels only) in
1⁄-inch size.
TIO
BUG-ME-NOT
Insect Repellent Clothing
Your best Defence against insect bites.
Ideal for camping, hunting, fishing, gardening, birdwatching, surveying and many other outdoor uses.
We know these top-quality hand-made bug protective garments will exceed your expectations. Unlike
most other insect protective clothing, they contain
“no-see-um” mesh. This cool, lightweight mesh is
tear and flame resistant and very tough. The garments are designed to fit over all types of clothing
or can be worn alone. Available in black or camo.
Tough and durable
Remains cool even on the hottest of
days
Protects you from sunlight’s ultraviolet
rays (up to 64.3% UVB, 62% UVA)
Made of featherweight see-through
polyester
No chemical insect repellent required
Mesh is certified flame resistant
Protects against most insects
including:
• “no see-um” flies
• mosquitoes
• black flies
• deer flies
• ticks
• midges
Comfortable nylon-rib cuffs* and elastic
waist
Overhead zipper in jacket hood prevents
sagging and obstruction of view.
A
LO DI
S
N
SO
62
LU
NG
RE
* Not available on Bug Beater range
TIO
SIERRA RELOADING
MANUAL - 4th Edition
When the 4th Edition Sierra
Reloading Manual was re-written,
Sierra completely retested the data
and has included all new powders and
bullets to provide the most up to date
information possible.
SRAMAN
Sierra Rifle Reloading Manual
NOSLER RELOADING
MANUAL #4
The latest reloading manual by
Nosler is filled with articles from
top writers on different reloading
and shooting techniques. This book
includes never before published information on Nosler Ballistic Tip Bullets
along with new data on Partition
bullets. New ballistic table format.
Hardbound edition - 528 pages.
NSLMAN
Nosler Reloading Manual #4
HORNADY
RELOADING
HANDBOOK - 5th Edition
This latest Hornady Reloading
Handbook has new loads, new
powders and new bullets including VMAX and AMAX. Vol 1
has thousands of tested loads
keyed to ballistic tables in Vol
2. Hardbound.
BOOKS / SOFTWARE
Reloading Manuals, Shooting
Books and Computer Software
HRNMAN
Hornady Reloading Handbook
THE BENCHREST SHO
OTING PRIMER
A singular book for shooters - 420 pages (8⁄”x11”)
of inner circle benchrest
shooting and reloading
information, from many of
the very best shooters of the
last twenty years. Includes
information on building
a winning benchrest rifle.
Softcover. All material is reprinted from Precision Shooting.
RS776339 . . . . . . . . . . . . . . . . . . Benchrest Shooting Primer
LEE RELOADING MANUAL
SPEER
RELOADING MANUAL #13
Everyone from the beginner to the
more experienced handloader will
find the new 13th Edition filled with
valuable information. Includes new
powders such as Vihtavouri and step
by step instructions for reloading.
SPMAN
Speer Reloading Manual #13
HODGDON 27TH EDITION
DATA MANUAL
RCBS99915 . . . . . . . . . . . . . . . . . RCBS.Load™ Reloading Software
BARNES BALLISTICS SOFTWARE
Barnes Ballistics for Windows® (Minimum
Requirements: 486-66 MHz, 8 MB RAM,
Windows 3.1 or higher) computes specifics
for your firearms and loads such as trajectory, energy, wind deflection and velocity
information in table and graph form. The
information, as well as your personalised
note section, can be displayed and printed
on one sheet for easy access and interpretation.
BABB2. . . . Barnes Ballistics Software
SO
A
LO DI
63
LU
NG
RE
The Hodgdon 27th Edition Data
Manual provides a wealth of reloading and ballistics information and
contains loading data for a number
of wildcat favourites. Includes data
for IMR Co., Alliant and Winchester
powders. Hardcover 3-ring binder.
HDMAN
Hodgdon 27th Edition Data Manual
The RCBS reloading data manager
software for Windows® gives you thorough data and information for all your
reloading needs. Features include a
precision Exterior Ballistic Calculator,
a cartridge drawing database of more
than 280 different cartridges, Kinetic
Energy Calculator, 1100+ standard
bullet database, all data from the Speer
Reloading Manual and much more.
A graphing Tool enables you to graph
comparison data from two cartridges
on the same screen. Requires a 486-66
MHz min (Pentium preferred), CD Rom Drive, Windows 95®, Windows 98®,
16 MB min memory and colour screen resolution of 800x600 min pixels.
S
LEEMAN
LEE Reloading Manual
RCBS.LOAD™ SOFTWARE
N
Includes virtually all current load data
published by the powder suppliers.
Exclusive source of volume measured
loads. 350 pages of charts and data and
85 illustrations. Hardbound - 512 pages.
TIO
K&M
Custom Tools
SERVICES
K&M
MICRO-ADJUSTABLE CASE NECK
TURNING TOOL
Undoubtedly the tool with the
best resolution of adjustment
of all tools on the Market.
Outside Neck Turning (Hand
Lathe) is far superior to any
form of inside reaming as
a reamer would tend to follow the off centre hole of the
case mouth. The K&M tool
is simple to use. It can easily
be adjusted to remove the desired amount of brass from the thick side to
clean up or equal the thin side or the tool can be adjusted to cut down to the
desired dimension. Tolerance can be held to .0001” very easily - the adjustment is a compound thread that is equal to 440 turns to the inch instead of
the usual 40. (Note: even a micrometer only has 40 turns to the inch). Index
marks are provided to assist its adjustment. The cutter is special ground with
angles unique to cutting brass and the case holder uses LEE Autoprime shell
holders to hold different cartridges. The shell holder clamps the case in the
hex drive power adapter so it can be powered by a low speed drill or cordless screwdriver, or the power adapter can be used with the handle provided
for hand operation. Mandrels are available in the following calibres: .17, .22,
.24(6mm), .25, .26(6.5mm), .27, .28(7mm), .30
KM50000
Complete Case Neck Tool w/Mandrel & Case Holder
(Specify Mandrel size and LEE Shellholder no.)
KM50003
KM50005
Case Neck Tool Body w/Pilot (Specify Mandrel size)
Case Holder/Power Adapter (Specify LEE shellholder no.)
(Refer to LEE Shellholder Reference chart on page 38.)
NECK TURNING
& EXPANDER
MANDRELS
Top: Neck Turner Mandrels
Bottom: Expander Mandrels
Neck Turner Mandrels
KM59017 . . . . . . . . .17
KM59022 . . . . . . . . .22
KM59024 . . . . . . . . .24/6mm
KM59025 . . . . . . . . .25
KM59033 . . . . . . . . .338
Expandiron w/Press Adapter
KM60017 . . . . . . . . .17
KM60022 . . . . . . . . .22
KM60024 . . . . . . . . .24/6mm
KM60025 . . . . . . . . .25
KM60033 . . . . . . . . .338
Expander Mandrels
KM69017 . . . . . . . . .17
KM69022 . . . . . . . . .22
KM69024 . . . . . . . . .24/6mm
KM69025 . . . . . . . . .25
KM69033 . . . . . . . . .338
KM59026
KM59027
KM59028
KM59030
........
........
........
........
.26/6.5mm
.270
.284/7mm
.308
KM60026
KM60027
KM60028
KM60030
........
........
........
........
.26/6.5mm
.270
.28/7mm
.308
KM69026
KM69027
KM69028
KM69030
........
........
........
........
.26/6.5mm
.270
.28/7mm
.308
TAPERED CASE MOUTH REAMER
The K&M Tapered Case Mouth Reamer
has a 4 degree taper per side and an
adjustable stop. It will accommodate all
cases .22 to .30 calibre. It has six flutes
with an adjustable depth stop and will smoothly remove any burrs and provides a consistent chamfer case to case. It is a well known fact that the base
of the bullet is more important towards greater accuracy than the tip which
can then be seated without harm.
S
SO
64
LU
N
L
NG
RE
KM72230 . . . . . . . . . . . Tapered Case Mouth Reamer
O A DI
TIO
EXPANDIRON
New or competition brass is not quite ready to neck turn when you buy
it. And the commercial die manufacturers have no set standards for the
expander button in their dies.
Large variations from Mfg. to Mfg. and even within a given Mfg. makes it
necessary to properly size the inside diameter of the
case before neck turning. The neck turning mandrel
cannot be used to correctly expand the case neck
because of the elasticity of the brass. It will “spring”
back and be too tight for proper neck turning.
The 7/8-14 threaded Press Adapter allows the expandiron to fit most standard reloading presses and the
interchangeable expander mandrels are sized to be the
perfect companion to the K&M Micro-Adjustable
Neck Turner. The expander mandrels will iron out
(smooth) and slightly expand the case neck so that the
brass will spring back to the correct size needed for
neck turning.
Each expander mandrel has an adjustment screw to
‘bottom out’ in the case before the case mouth can hit
the mandrel’s shoulder.
Expandiron with
Press Adapter
FLASH HOLE UNIFORMER
Benchrest shooters have been
uniforming flash holes since
1969. In cartridge manufacturing, the flash hole is
‘punched’ into the brass
and thus , are of different
sizes and shapes. The most
detriment to accuracy are
the irregular ‘breakouts’ and
‘burrs’ on the inside - causing ‘shot to shot’ differences
in primer ‘flame fronts’,
inconsistent pressure/velocity
and thereby loss of accuracy.
With the K&M Flash Hole From L to R: Pro, Master and Pee Wee
Uniformer, you simultaneously ‘ream’, ‘deburr’ and ‘chamfer’ the inside of the flash hole. The unique
feature of this K&M tool is that is provides uniformity with a ‘pre-set’ depth
stop surrounding the steel cutter, it does not require the cases to be trimmed
to a uniform length. Operation is controlled in reference to inside bottom of
case, not case mouth. A ‘reversible’ sliding centering cone is supplied to keep
the case aligned and centred during the uniforming operation. The sliding
cone will accept calibres from .22 to .458. Not designed for use under power.
KM40080
KM30062
KM40180
KM30162
KM41080
KM40099
KM30099
...........
...........
...........
...........
...........
...........
...........
Pro Flash Hole Uniformer .080” Std
Pro Flash Hole Uniformer .062” PPC/BR
Master Flash Hole Uniformer .080” Std
Master Flash Hole Uniformer .062” PPC/BR
Pee Wee .17 Cal - no cone
Replacement Cutter .080” Standard
Replacement Cutter .062” PPC/BR
PRIMER POCKET UNIFORMER
Variations in the depth of the primer pocket,
not to mention the primer seating operation
can and will alter the effect of the firing pin
blow. The K&M Primer Pocket Uniformer
will allow the reloader to cut all of his primer
pockets to a uniform and consistent depth,
while remaining with SAAMI specs for primer
pocket depth. The proper use of these tools
will then allow you to set yours to the same
depth consistently.
KM20000 . . . . . . . . . . . Primer Pocket Uniformer (Large Rifle)
KM20100 . . . . . . . . . . . Primer Pocket Uniformer (Small Rifle)
KM20200 . . . . . . . . . . . Plastic Handle
HP06000 . . . . . . . . . Harrell's Premium “Culver” Measure
HP06090 . . . . . . . . . Harrell's Custom 90 Measure
HP04010 . . . . . . . . . 250 ml Powder Bottle with lid
HP04015 . . . . . . . . . 500 ml Powder Bottle with lid
HP04020 . . . . . . . . . Harrell's 4” Drop Tube 3/16” ID
WILSON
CASE TRIMMER KIT
This trimmer is unique,
compared with other case
trimmers, because of the way
the case is held during the
trimming operation. Correct
alignment is assured, as the
cartridge case is supported by
the case body in holders which
simulate the rifle chamber.
Cases will be trimmed squarely
regardless of offset heads or
varying neck diameters. The
positive stop assures uniform length. Cases are held in holders by their body
taper; just drop the case in the holder and tap the head end on a hardwood
block. Remove by tapping on the same block. Clamping attachment holds
down case holders while trimming. The trimmer kit includes a trimmer
mount that can be C-clamped or bolted to your bench and one case holder
for fired cases only.
HP01000 . . . . Harrell's Arbor Press
COMPACT RELOADING PRESS
To provide reloaders with a strong but
portable reloading press that takes
standard 7/18”-14 dies Harrell’s have
produced this precision engineered “C”
style reloading press. Manufactured from
solid 6061 high strength aluminium and
steel this press allows effortless full length
resizing. Boasts compound leverage and
mounting clamp, and accepts standard
press shell holders. Available in three
models to for a variety of cartridge cases.
HP02000 . . . . Compact Reloading Press
HP03000 . . . . Medium Reloading Press
HP04000 . . . . Magnum Reloading Press
Compact - PPC, BR and smaller sized
cartridge cases
Medium - 243, 308 and smaller sized cartridge cases
Magnum - cartridge cases up to 2.9” in length
WILSON CASE HOLDERS
WIL02010 . . . . . . . . Case Holder for .17, 222, 223
WIL02020 . . . . . . . . Case Holder for 22-250
WIL02030 . . . . . . . . Case Holder for .243, .308, 7mm-08
WIL02040 . . . . . . . . Case Holder for 25-06, 270, 30-06
WIL02050 . . . . . . . . Case Holder for .300 Mag, 7mm Mag, .338 Mag
WIL02060 . . . . . . . . Case Holder for 22 BR, 6mm BR
WIL02070 . . . . . . . . Case Holder for 22 PPC, 6mm PPC
DEBURRING TOOL
AND HOLDER
Deburr your cases efficiently with this
holder and your power screwdriver. Holder
is designed with a hex end for use in cordless screwdrivers. Can also be used in a drill.
Works with Wilson and RCBS Case Mouth Deburring Tools. Made of
stainless steel. Buy the Wilson tool and Deburring Tool Holder at a package
price.
WIL09000 . . . . .Wilson Deburring Tool
A
RS00005 . . . . . .Case Mouth Deburring Tool Holder
LO DI
SO
65
LU
NG
RE
WIL02000 . . . . . . . . Wilson Case Trimmer
WIL02900 . . . . . . . . Wilson Case Trimmer Mount
WIL03000 . . . . . . . . Wilson Case Trimmer Kit w/Clamping Mount & Case
Holder
The new Arbor press from Harrell’s is
a high quality portable reloading press
and perfect to use with hand dies, both
in the field and on the bench. It does
not need to be clamped down for use.
This arbor press boasts quality construction throughout and fits easily into your
reloading box for trips to the range. The
press is constructed with a solid stainless
steel post and operating handle. Ratchet
style height adjustment knobs allows
easy raising and lowering of the press
head position. This press is not made for
use with full length resizing dies.
S
Lynwood Harrell's is constantly
striving to make his custom
powder measures the best value
for money powder measures
on the market. The Premium
Culver measure may well be
the finest measure available to
reloaders. The measure has a
needle bearing on each side of
the metering insert reducing
vertical clearance to a few thousandths of an inch. The “feel”
of this measure is incredibly
smooth. Capacity is from 6-90
grains and it uses standard 500
ml powder bottles, comes with
two drop tubes, one plugged
powder bottle, and a clamp style mounting bracket. A brand new powder
measure from Harrell’s is the Custom 90. This measure retains the precision
insert, mounting clamp and 6-90 grain capacity of previous Harrell's models,
but extra frills have been eliminated to keep the cost down. The Custom
90 uses the smaller 250 ml powder bottles (comes with one plugged powder
bottle and two drop tubes) and does not use needle bearings. The measure
body is finished in a deep hard coat anodise which has been impregnated
with ‘teflon’
The Custom 90 is a Custom “Culver” style measure for a little more than an
out of the box factory measure.
ARBOR PRESS
N
BENCHREST POWDER MEASURES
Custom Equipment
CUSTOM EQUIPT.
HARRELL’S
PRECISION
TIO
LIGHTFORCE
Spotlights & Accessories
REMOTE CONTROLS
RC150 / RC225 Remote Controls
are designed for mounting SL or
RM model lights through the roof
of vehicles and boat cabins.
They provide user comfort and
superb control during operation
from inside the cabin. The remote
control is fitted with an on/off
switch in the handle, variable tension adjustment can be selected
from within the cabin to fix the
light in one position or enable it to
be freely rotated 360 degrees. (150
and 225 refer to length in mm).
Hand Held Spotlights
The Lightforce Spotlight has traditionally
been a hunting light, specifically designed
for spotlighting at night. Now Lightforce
produces a wide range of lights, designed
to enhance any situation that requires
superior portable lighting. Not only is
it the preferred hunting light, but is also
being sold for fishing, boating, camping,
security, military and police force, survelliance, as well as being used for nocturnal
fauna.
SL140
Features:
• 3 reflector dimensions: 140, 170 and
240mm
• ⁄” British Standard Whitworth
(BSW) brass adaptor moulded into the
removable handle insert, allows the light
to be mounted to the Scope Mounting
Kits SMKIT / SMKIT26 / SMKIT30 or
Remote Controls RC150 / RC225
• The insert in the bottom of the handle,
houses a spare bulb which can be easily
replaced in the field without tools.
SL170
LFRC150
LFRC225
RIFLE /SHOTGUN MOUNTING SYSTEMS
The shotgun mounting kit SGKIT is designed to allow under barrel mounting on over & under, side by side, single barrel shotguns, centrefire and rimfire rifles. This mount can be permanently fixed to the firearm and the light
is attached or detached as required using the snap catch system.
LFSGKIT . . . . . . . . . . . . . . . . . . Shotgun Mounting Kit
LFSL140 . . . . . .Lance 140 Handheld
LFSL170 . . . . . .Striker 170 Handheld
LFSL240 . . . . . .Blitz 240 Handheld
Remote Mounted Spotlights
The remote mounted RM spotlights are
designed for mounting onto the remote
control handles RC150 / RC225. The
RM spotlights are extremely robust and
weather resistant allowing permanent
roof mounting without fear of sun or
rain damage. They are ideal for the professional night hunter, security/surveillance officer, or mounting through the
cabin of a boat for night time navigation.
SL240
LFRM170 Striker 170 Remote Mounted
LFRM240 Blitz 240 Remote Mounted
Remote Scope Mounted Spotlights
(Not Illustrated)
RM170
S
SO
66
LU
N
L
NG
RE
RM240
O A DI
TIO
LFRMSM140 . . . . . . . Scope Mounted 140
LFRMSM170 . . . . . . . Scope Mounted 170
The use of this mounting system enables the
hunter independence, no longer relying on
someone else to ‘hold’ the light. Freedom
from the frustration of the light source
being moved off the target, just when you
are about to take the shot.
Features:
• Unique recoil absorption system
• Quick attach and detach snap catch sys
tem
• Inline switch, coil cord with cigarette
lighter plug
• Interchangeable between rifles
• Velcro fastener for securing switch to
stock
Remote Control 150
Remote Control 225
SRKIT
The rifle scope SRKIT mounting system can be
purchased separately for use with the RMSM model
lights. If you have more than one rifle that you want
to mount a light onto, these this kit can be used. The
SRKIT attaches to 1”, 26mm and 30mm tube rifle
scopes. These can be semi-permanently attached to the
scope and the light can then be detached or attached as
required using the snap catch system.
LFSRKIT . . . . .Rifle Scope Kit
REPLACEMENT BULBS
Xenophot bulbs are used in Lightforce lights.
These are precision bulbs which have been selected for their efficiency in converting WATTS into
CANDLEPOWER.
The Xenophot bulb gives 20% better performance than other standard Halogen bulbs. The
filament size and shape of the bulb determine
the concentration of a focused beam, generally
the lower wattage bulb has a smaller filament,
which in turn, offers the most precise spot. In
addition to the above information, the shape of the filament will determine
the type of beam, e.g. a vertical filament (VF) bulb will give a spot type
beam, whilst the horizontal filament (HF) bulb will give an oval beam.
Lightforce has bulbs available including 12v 20w, 30w, 50w, 75w and 100w
plus 24v 100w for specialist applications. If using the light combined with a
portable battery pack unit a lower wattage bulb will increase the useable time
in the field. H - Horizontal filament, V - Vertical filament
LFGL03 . . . . 12v 50w H filament
LFGL06 . . . . 12v 100w V filament
FILTERS
Filters are available in several colours, for most
reflector sizes. These are quickly attached and
detached by simply clipping onto the front of the
reflector housing.
Available in Amber, Clear, Red, Blue, Green
LFFB(--) Blitz
LFFS(--) Striker
LFFL(--) Lance
(--) denotes colour of filter required.
STALKING ACCS.
SEAT CUSHIONS
Inflatable model 300x400mm
Thermal Cordura model 280x400mm
Self-inflating model 440x350x35mm
Cushions are considered as a convenience that should not be forgotten, especially if you intend to sit in a high seat for any length of time. Not only are they
more comfortable than a bare seat but they will also act as an insulator in the winter months against freezing temperatures. Three models to choose from
depending on size and personal preference.
RS13235 . . . . . . . . . . . . . . . . . . . Thermal Cordura Seat Cushion w/belt loop
RS13222 . . . . . . . . . . . . . . . . . . . Self-inflating Seat Cushion
RS13220 . . . . . . . . . . . . . . . . . . . . . . . . . . Inflatable Seat Cushion
TRAVEL ACCESSORY
Washbox. An essential
hygiene item for deer
stalkers and travellers.
Water container and wash
bowl in one combination
package. Water containwill hold 8 litres of water
and incorporates a locking tap. Lid acts as a wash
bowl and recesses store
travel items. Includes
soap, hand towel and nail
brush. Green. A DMQ
essential item.
INSECT REPELLENT
er
Electronic insect repellent. Field tested on wetlands and in woodland with high success. Has
shown to repel insects to 4m. Ideal for mosquitoes, flies, midges etc... Operates on 1 AA battery, supplied.
RS13244 . . . . . . . . . Insect Repellent
RS13330 . . . . . . . . . Wash Box
FOLDING CARTRIDGE CARRIERS
Charlybox. Now even your
favourite shooting dog can
enjoy a refreshing drink
of water or even a bite to
eat if you’re delayed while
out hunting. A water container and feeding bowl in
one combination package.
Water container has a
secure screw top and two
separate recesses are provided for food and drinking water. Green.
Folding Cartridge Carriers - Keeps ammo
dry, protected and out of sight. Lift velcrosecured flap and the carrier folds down.
Made from cordura.
Rifle holds 10, Magnum Rifle holds 8.
UM88451
UM88456
UM88331
UM88336
. . Cartridge Carrier-Black
. . Cartridge Carrier-Camo
. . Cartridge Carrier-Mag Blk
. . Cartridge Carrier-Mag Camo
RS11638 . . . . . . . . . Charlybox
DEER CARCASS SACKS
Deer Carcass Bags, ideal as Roe Sack
liner or for transporting venison.
Green polythene. 10 per pack.
RS11190 Carcass Sacks
Butt Stock Ammo Holders - for those
hunters that prefer having extra cartridges
right to hand. Two styles to choose from
either with or without a flap over ammo.
Elastic sleeve slips over rifle butt. Sewn on
elastic loops adapt to different cartridges
and keep ammo in place. Flap style is
secured by velcro. Open style - 9 loops,
flap style - 6 loops.
S
67
LU
N
SO
A
LO DI
NG
RE
UM88481 . . . . .Ammo Holder Open Style
UM88482 . . . . .Ammo Holder Flap Style
TIO
Trophy Accessories
TROPHY ACCS.
TROPHY SHIELDS AND CLAMPS
Trophy Shield with recess. Shown
with trophy clamp. Suitable for Roe,
Muntjac and Chinese Water Deer.
Size 205x120mm.
Trophy Shield with recess. Suitable
for Roe, Muntjac and Chinese
Water Deer. Includes trophy clamp.
Size 205x130mm.
RS14283 . . . . . . . . . Dark
RS14282 . . . . . . . . . Light
RS14203 . . . . . . . . . Dark
RS14202 . . . . . . . . . Light
Trophy Shield. Suitable for Fallow
Deer.
Size 280x175mm.
RS14233 . . . . . . . . . Dark
RS14237 . . . . . . . . . Light
TROPHY
PREPARATION
Universal trophy cutting jig
allows accurate cutting of your
trophy and has fully adjustable cutting guides to allow
preferred angle of cut. Special
saw has hardened teeth to
facilitate cutting bone.
RS14266
Trophy Cutting Jig
DEER CARCASS BOX
Trophy clamp for Fallow, Red and
Sika Deer skulls. Galvanised metal
construction.
RS14269 . . . . . .Trophy Clamp
Trophy clamp for Roe, muntjac etc....
Light metal construction with screw.
RS14270 . . . . . .Trophy Clamp
Trophy Shield. Suitable for Red and
Sika Deer.
Size 420x230mm.
RS14226 . . . . . . . . . Dark
RS14225 . . . . . . . . . Light
LATEX EXAMINATION GLOVES
Deer carcass box of Polyester and glass fibre construction. Extremely robust with
two carrying loops. Green. Dimensions 90x60x20cm. (library photo)
S
N
SO
68
LU
RS00051 . . . . . . . . . Latex Gloves, 100 count
NG
RE
RS11178 . . . . . . . . . . . . . Deer Carcass Box
A
LO DI
A box of 100 disposable, non-sterile, ambidextrous gloves.
The gloves are corn starched and powdered for comfort.
Ideal for a wide range of uses where retention of the feeling in gloves is needed for delicate tasks. Highly recommended for when gralloching deer.
TIO
STALKING ACCS.
FAC/SHOTGUN CERTIFICATE WALLETS
STALKING/HUNTING STICKS - TELESCOPIC
The finest leather Firearm /
Shotgun certificate wallet with
snap closure and business card
holder on inside flap. Made of
full grain leather, hand stitched
and finished to a custom standard. Available in black or
havanna brown. Closed size
240mm x 120mm.
RS10575
FAC/Shotgun Wallet-Black
RS10577
FAC/ShotgunWallet-Havanna
Close up of firm cushioning on
shooting bipod and tripod models.
RIFLE BOLT SHEATHS
A safeguard when leaving your
rifle in a vehicle or on the range.
Made of full grain leather, hand
stitched and finished to a custom
standard. Available in black or
havanna brown. Bolt size may be
required.
RS10405 . . Rifle Bolt Sheath
- Black
RS10401 . . Rifle Bolt Sheath . . . . . . . . . . Havanna
RS10406 . . Rifle Bolt Sheath w/flap, Black (not illustrated)
RS10409 . . Rifle Bolt Sheath w/flap, Havanna (not illustrated)
Stalking bipod shown extended for standing
shot position.
THE ULTIMATE SHOOTING STICKS
AMMUNITION WALLETS AND CARRIERS
Leather Rifle Cartridge Wallet w/flap and internal elastic loops. Eight cartridge design has separate full loops and a snap closure. Both have belt loop
on reverse. Suitable for .243 Win size cartridges
RS11782 . . . . . . . . . Ammo Wallet - 6 round
RS11147 . . . . . . . . . Ammo Wallet - 8 round
LEATHER RIFLE SLINGS
These superb quality shooting sticks offer greater versatility over conventional fixed bipods where extra height is preferred for standing, kneeling
or squatting shots. Lightweight design permits quick and easy setup for
improved accuracy on any terrain. Tripod model offers the ultimate rest for
longer range shots. Both models may be adjusted quickly from 23 inches to
67 inches. Dark green and black anodised finish with firm foam cushioning
on rifle rest/support. Tape across “V” support may be removed if preferred.
An asset for all types of deer stalking/hunting and DMQ Assessment.
RS85520 . . . . . . . . . Hunting Bipod — 23 ins. - 68 ins.
RS85536 . . . . . . . . . Hunting Tripod — 23 ins. - 68 ins.
RS85500 . . . . . . . . . Hunting Monopod — 23 ins. - 70 ins. (not illustrated)
AMMUNITION CARRIERS
Leather rifle ammunition carriers w/flap and
internal elastic loops. Nine cartridge design has
separate full loops and a snap closure. Belt loop
on reverse. Suitable for most cartridge sizes.
RS11659 . . . . . . . . . Ammo Carrier - 9 round
S
69
LU
N
SO
A
LO DI
NG
RS31200 . . . . . .Leather Rifle Sling - Dark Brown
RS31210 . . . . . .Leather Rifle Sling - Tan
RE
Compliment your finest hunting rifle with one of these top quality full grain
leather rifle slings. Leather thong fastening will not mark your rifle’s finish
or rattle in use. Adjustable for height. Available in Dark brown or Tan.
TIO
Game Calls
GAME CALLS
1
2
5
Dual Reed
Assembly
6
12
13
14
17
18
1. Original Buttolo call. Designed for Roe Fawn and Alarm calls. Rubber
squeeze ball. Black.
RS13010 . . . . . . . . . Buttolo Deer Call
2. Faulhaber Roe Call Set. Individual calls for kid, fawn, alarm and young
buck. Hard plastic storage case.
RS13024 . . . . . . . . . Faulhaber Roe Call Set
3. Hubertus 3 call combination set. Individual calls for Roe fawn, duck and
fox. Leather storage case.
RS13035 . . . . . . . . . Hubertus Combination Call Set
4. Hubertus Roe call. Cherry wood construction and suitable as a fawn call.
RS13012 . . . . . . . . . Hubertus Wooden Roe Call
5. Primos Hardwood Trophy Grunter, adjustable reeds allows extra loud
grunts to bleat calls. Very effective on Fallow deer.
PRI701 . . . . . . . . . . Hardwood™ Trophy Grunter
6. Primos Trophy Grunter, adjustable reed assembly, plastic construction.
Ideal Fallow Buck call.
PRI707 . . . . . . . . . . Trophy™ Grunter
7. Primos Hands Free Buck & Doe call, compact size and allows hands free
operation, includes lanyard.
PRI717 . . . . . . . . . . Hands Free Buck & Doe Call
8. Primos Power Buck & Doe™ call, inhale/exhale operation with dual reed
assembly, throaty grunts to doe bleats and cries. Realistic Fallow call.
PRI729 . . . . . . . . . . Power Buck & Doe Call™
9. Primos Pro-Squealer, reproduce a variety of whines, whimpers and
screams, freezeproof.
PRI455 . . . . . . . . . . Pro-Squealer
10. Primos Pro-Screamer, four super thin reeds allow more volume.
PRI171
. . . . . Pro-Screamer
A
O D
I
S
N
SO
70
LU
16
15
19
TIO
20
11. Primos Mouse Squeaker, reproduces the sound of field mice and other
rodents attracting predators in close.
PRI324 . . . . . . . . . . Mouse Squeaker
12. Primos Mouse Squeeze, just pick it up and squeeze, it’s that simple.
PRI304 . . . . . . . . . . Mouse Squeeze
13. Primos Jackrabbit Predator call reproduces whines and whimpers of rabbit in distress, long and close range, includes lanyard.
PRI306 . . . . . . . . . . Jackrabbit Predator Call
14. Primos Cottontail Rabbit Predator call, reproduces high pitched screams
of the cottontail rabbit, includes lanyard.
PRI316 . . . . . . . . . . Cottontail Rabbit Predator Call
15. OLT CP-21 Close Range Predator call, used for close-in calling.
OLTCP21 . . . . . . . . Model CP-21 Predator Call
16. OLT 22 Dual Range Predator call, allows long range calling and soft
squeaks. American Walnut construction.
OLT22 . . . . . . . . . . . Model 22 Predator Call
17. OLT 33 Predator call, loud screaming and squalling rabbit distress
sounds, great for long distance calling. American walnut construction.
OLT33 . . . . . . . . . . . Model 33 Predator Call
18. OLT T-20 Predator call, an all round varmint call for foxes and produces
long range quavering screams of distress, cycolac construction.
OLTT20 . . . . . . . . . T-20 Predator Call
19. OLT Big Bay 800 Goose call, best quality American walnut barrel. A
favourite with professional goose guides.
OLT800 . . . . . . . . . . Big Bay 800 Goose Call
20. OLT L-22 Regular Goose call, easy to blow and unaffected by moisture,
realistic tone for Canada and other species, can be blown with good volume.
OLTL22 . . . . . . . . . L-22 Regular Goose Call
NG
RE
L
11
10
9
Targets
VIT17QB2
OUT45760
OUT45725
RS97001
RS97003
RS97004
OUT40746
Outers Rifle Sighting-In targets have multiple bullseye aiming points on the
same sheet. Targets also feature a 1” grid system and space to record data
such as cartridge, primer, powder, bullet, velocity etc.... Library photo.
OUT45726 . . . . . . . Precision Rifle Sighting-In, 12/pack Until stocks last
OUT45760 . . . . . . . Precision Rifle Sighting-In, 12/pack
TARGETS
VIT14SB
Visible Impact Targets
are made from polystyrene which when hit will
show perfect bullet holes
and make it easier to see
at longer ranges.
VIT14SB Big Game
Sight-in
VIT17QB2 17”
Quadrant
RS97002
Outers 100 yard Smallbore targets are comprised of a single orange bullseye
centre with black rings surrounding. Space to record data as above.
OUT45725 . . . . . . . 100 yard Smallbore Target, 12/pack
RS97005
Leupold 100 Yard Targets are printed on tag board and are excellent for
sighting in scoped rifles and feature a 1” grid system.
OUT40746 . . . . . . . 100 Yard Sight In Target, 12/pack
BIRCHWOOD CASEY TARGET SPOTS
RS97006
The greatest benefit of these
targets is “repeatability of
hold”
The target helps the shooter
reduce “human error” in aiming, when aligning the scope
reticle which results in better
shot-to-shot consistency ......
tighter groups !!!
MOUNTAIN PLAINS DATA TARGETS
BC33901 . . . . . . . . . 1” Target Spots, 216 count
BC33904 . . . . . . . . . 1 1/2” Target Spots, 96 count
BC33902 . . . . . . . . . 1” & 2” Target Spots, 2”-36, 1”-72
BC33908 . . . . . . . . . Target Spots Assortment, 1”-120, 2”-60, 3”-40
MOUNTAIN PLAINS DATA TARGETS
Range Master - Printed on 11” x 17” paper stock and has same features as
other models. The Range Master has a 10” circle surrounding a 6 1/2” diamond within which is a 4” circle surrounding a 2” diamond. Two additional
2” aiming points with 1” centres are also provided. This target was designed
for open sights and low magnification scoped firearms at 100 yards/metres.
It may also be used for higher magnification scoped firearms to distances of
perhaps 400 or 500 yards/metres. The two smaller diamonds maybe used for
short range scope sight in as close as 25 yards or at 100 yards for checking
zero before moving the target further back for long-range shooting.
Green Series - 4” diamond with 2” centre. Recommended for a scope magnification of 7x thru 9x at 100 yards/metres, 14x thru 18x at 200 yards/metres
and 24x thru 36x at 300 yards/metres.
RS97002 . . . . . . . . . Green Series 4” Single Target, 2” centre
Orange Series - 3” diamond with 1 ⁄” centre. Recommended for a scope
magnification of 9x thru 12x at 100 yards/metres, 18x thru 24x at 200 yards/
metres and 36x at 300 yards/metres.
RS97003 . . . . . . . . . Orange Series 3” Single Target, 1 ⁄” centre
Blue Series - Two 2” diamonds with 1” centres. Recommended for a scope
magnification of 14x thru 20x at 100 yards/metres and 36x at 200 yards/
metres.
RS97004 . . . . . . . . . Blue Series 2” Twin Target, 1” centres
Black Series - Three 1 ⁄” diamonds with ⁄ centres. Recommended for
a scope magnification of 20x thru 24x at 100 yards/metres and 36x+ at 200
yards/metres. Also great for 22 rimfire rifles at 50 feet to 50+ yards/metres.
A
RS97005 . . . . . . . . . Black Series 1” Triple Target, ⁄” centres
LO DI
SO
71
LU
NG
RE
RS97006 . . . . . . . . . Range Master Series 10” Multi-Purpose Target
Red Series - 5” diamond with 2 ⁄” centre. Recommended for a scope magnification of 4x thru 6x at 100 yards/metres, 8x thru 14x at 200 yards/metres
and 18x thru 24x at 300 yards/metres.
RS97001 . . . . . . . . . Red Series 5” Single Target, 2 ⁄” Centre
S
Self-adhesive fluorescent orange red target spots with black diamond centre
and crosshair lines. High visibility, great for sighting in rifles.
N
BC33901, BC33904, BC33902, BC33906
These high visibility targets in bright blue on white are amazing to see
through your rifle scope. Targets crosshairs and dots show up extremely well
on the blue background. These targets also feature a 1” grid system with 1/4”
segments for easy measuring. Each target includes space to record data such
as cartridge, primer, powder, bullet, velocity etc.. All targets are drilled for a
3-hole binder and have 25 targets per pad.
TIO
MAG INSTRUMENT
6D-Cell Mag-Lite®
BLACK S6D015 RED S6D035
5D-Cell Mag-Lite®
4D-Cell Mag-Lite®
3D-Cell Mag-Lite®
2D-Cell Mag-Lite®
2C-Cell Mag-Lite®
BLACK S2C016
3C-Cell Mag-Lite®
BLACK S3C016
4C-Cell Mag-Lite®
BLACK S4C016
5C-Cell Mag-Lite®
BLACK S5C016
6C-Cell Mag-Lite®
BLACK S6C016
Without question the ultimate lighting tool. This masterpiece of engineering features a
battery pack rechargeable up to 1,000 times, a state-of-the-art, electro formed reflector, an incredibly bright, high intensity halogen bulb, solid-state electronics throughout,
adapters for both home and car, and a 360 degree Charging Ring so the Mag-Lite®
Recharger can be mounted and recharged easily in any position.
RX2019 . . . . . . . . . . . . . . . . . . . . . . . . . . . .Mag Charger 12v/220v AC
BLUE S3D115
DARK GREEN S3D395
GREY S3D945
BLUE S2D115
DARK GREEN S2D395
GREY S2D945
MAG-LITE®
C-CELL AND D-CELL
From the earliest beginnings of our company, we have designed
our products for those who demand more from a flashlight than
just a simple source of light. Because at Mag®, we understand a
flashlight is more than simply the sum of its parts. It is a complex
working relationship between lamp, reflector, and power source.
Only Mag-Lite® offers a truly balanced and efficient lighting system. What’s more, a Mag-Lite® is designed tough enough to last a
lifetime. Which is precisely why more police, security, emergency,
medical and fire professionals around the world have come to rely
on Mag-Lite® C and D-Cell flashlights.
A
LO DI
S
N
SO
72
LU
NG
RE
A COMMITMENT TO PERFECTION
At Mag, we believe the spirit and character of a company is most clearly defined and
expressed in its founder, owner and president
Tony Maglica.
Each flashlight is a result of his obsession
with fine
engineering and craftsmanship. Each
one, a
commitment to perfection.
An experimental machinist
by
training and a manufacturing
innovator by practice, Mr.
Maglica’s vision has resulted
in growth from one worker in
1955 to more than 600 dedicated employees today. But
his work does not stop there.
Today Mr. Maglica continues
his commitment to not just settle
for
greatness, but to improve upon it.
And
that can only be accomplished by personally
overseeing every aspect of the product
that bears
his name.
MAGLITE®
RECHARGEABLE SYSTEM
TIO
White Star replacement bulbs for C&D Cell torches
LWSA201
2 - Cell
White Star Bulb
(Pk 2)
LWSA301
3 - Cell
White Star Bulb
(Pk 2)
LWSA401
4 - Cell
White Star Bulb
(Pk 2)
LWSA501
5 - Cell
White Star Bulb
(Pk 2)
MAG INSTRUMENT
C AND D-CELL ACCESSORIES
Magnum Star replacement bulbs for C&D Cell torches
LWSA601
6 - Cell
White Star Bulb
(Pk 2)
LMSA201
2 - Cell
Magnum Star
Bulb
LMSA301
3 - Cell
Magnum Star
Bulb
LMSA401
4 - Cell
Magnum Star
Bulb
LMSA501
5 - Cell
Magnum Star
Bulb
LMSA601
6 - Cell Magnum Star Bulb
Please ensure you order the relevant replacement bulb for C&D Cell torches ie bulbs prefixed with the numbers 201 are for 2 C&D Cell only, and 301 are for 3 C&D Cell only etc.
ASXX376
D Accessory Kit
ASXD021
HOL001
ASXX08B
HOL001
D Cell Leather
Holster
ASXX07B
ASXD021
D Auto Clamp (2)
ASXX09B
ASXC041
ASXD031
ASXD051
ASXX08B
Yellow Wand D
ASXC041
C Belt Holder Plain Leather
ASXD031
D Belt Holder Plain Leather
ASXD051
D Belt Holder B/W Leather
ASXX07B
Red Wand D
ASXX09B
WHITE WAND D
Plated contacts with the finest
metals to enhance conductivity,
reduce oxidation, and increase
durability
•
Manufactured in the USA and
protected by a 10 year guarantee
•
High grade rubber ‘O’ rings
ensure that a Maglite is water
and shock resistance
S
73
LU
N
SO
A
LO DI
NG
RE
Precision machined high
strength aircraft aluminium
alloy cases
•
High intensity light beam
•
Linear focusing spot to flood
beam with a twist of the wrist
•
Spare Krypton bulb safely
secured in the tail cap
•
Anodised inside and out for
maximum corrosion resistance
for durability
TIO
MAG INSTRUMENT
SOLITAIRE
/
SOLITAIRE®
AAA
AA
AA
Presentation
Boxed
Presentation
Boxed
Presentation
Boxed
Combo
Pack
Holster
Combo
Pack
BLACK
K3A012
M3A012
M2A01L
M2A01C
M2A01H
RED
K3A032
M3A032
M2A03L
-
M2A03H
SILVER
K3A102
M3A102
M2A10L
-
M2A10H
BLUE
K3A112
M3A112
M2A11L
-
M2A11H
GREEN
K3A392
M3A392
M2A39L
-
M2A39H
GREY
K3A942
M3A942
M2A94L
-
-
PURPLE
K3A982
M3A982
M2A98L
-
-
CAMO
-
-
-
M2A02C
-
®
COLOUR
MINI AAA
/
MINI AA
AA
SOLITAIRE®
Less than an ounce and three inches in length, the Solitaire®
offers the same precision engineering found in every Mag-Lite®.
Using only a single AAA battery, its focusing beam is surprisingly
bright for such a small flashlight. A spare Solitaire® bulb is
included in the tail cap along with an Energizer® Alkaline battery and a sturdy key lead which facilitates the use of the key
and lightbeam in the same direction. It’s also ideal for a key
chain or purse.
A WORK OF ART THAT WORKS
Mag-Lite® rightfully have the reputation of being simply the best and brightest. The smaller Solitaire® and AAA Torches
are ideal for the handbag or suitcase, whilst the
AA is slightly larger but still sufficiently compact for regular everyday use. All three models are available in a comprehensive selection of colours, in either presentation box or blister packed.
MINI MAGLITE AAA
®
Don’t let its size deceive you. All the features that make the Mini Maglite AA® flashlight a marvel of engineering can be found in our Mini Maglite AAA® version
as well. Equally impressive is the fact that the Mini Maglite AAA® has a beam equal to that of many larger flashlights. (This is due in part to its superior optics
and custom reflector.) The Mini Maglite AAA® comes with its own Energizer® Alkaline batteries and a removable clip. It fits easily into a pocket or small purse.
Enhanced by a sleek black presentation box, it is a most impressive gift.
ACTUAL SIZE
AAA
MINI MAGLITE AA®
If we may be so bold, this is the flashlight that changed the industry forever. Until we introduced the Mini Maglite® no one had ever dreamed a flashlight could
be powerful.
Which most certainly explains why Fortune and Money magazines have named the Mini Maglite® one of the products America makes best.
A
LO DI
S
N
SO
74
LU
NG
RE
ACTUAL SIZE
AA
TIO
MAG INSTRUMENT
AA COMBO PACKS AND HOLSTER COMBO PACKS
(BLISTER PACKED ONLY)
M2A02C
LK3A001
SOLITAIRE®
Bulb
M2A01C
LM3A001
MINI MAGLITE®
AAA Bulb
GIFT SETS
SOLITAIRE, AAA & AA
ACCESSORIES
AM2A051
Holster
Nylon AA
LM2A001
MINI MAGLITE®
AA Bulb
MAG-LITE® AND
VICTORINOX
GIFT SETS
AM2A131
CAMO Nylon
Holster AA
We offer the famous and unique Mag-Lite® torch combined with the high quality Victorinox Classic Swiss Army
Knife in an attractive presentation box and in a
choice of three sizes.
M2A65L
®
MAG-LITE AA Black with Classic Knife
AM2A021
Holster Plain Leather AA
M3A65L
®
MAG-LITE AAA Black with Classic Knife
AM2A426
DELUXE Holster AA
K3A652
®
SOLITAIRE Black with Classic Knife
FISHER SPACE PEN
75
LU
NG
SO
A
LO DI
S
S3A400B
BLACK SPACE PEN
®
WITH BLACK SOLITAIRE
RE
S3A400
CHROME SPACE PEN
®
WITH SILVER SOLITAIRE
N
AM2A011
MINI MAGLITE®
AA ACCESSORY KIT
We offer the Mag-Lite® Solitaire® in
a choice of silver or black with
the Fisher Space Pen, the pen
that writes anyway, anywhere
in similar colours. Packed in an
attractive presentation box this
product provides the perfect gift for
the discerning customer seeking something
a little different.
TIO
MISCELLANEOUS
ALBERTA
NATIVE
GUIDE
SERVICE
Stainless Steel Dial Caliper
This is probably the most widely used measuring tool that
reloaders will not want to be without. We do not recommend that you cut corners and purchase plastic ones. We
prefer the dial type as opposed to vernier scales through
ease of use. These are of quality construction and have
easy to read dials. Calipers are supplied with a hard protective case.
RS00001 . . . . . . . . . Dial Caliper
Micrometer
HODGDON
EZ POUR FUNNEL & CAP
Funnel and Cap All-in-One
replaces the cap on all Hodgdon
one pound canisters, reducing
spilled powder. Caution: After
use the original canister lid must
be replaced securely for proper
storage.
This is a traditional vernier micrometer which offers precision at a very
affordable price. It reads to .0001” on
a Vernier scale and has a spindle lock
and friction thimble for precise measurements. A wooden storage box is
included.
RS00002 . . . . . . . . . Micrometer
HDFUN1 . . Funnel Pouring Cap
SNAP CAPS
After cleaning your guns, to prolong the life of firing pins and firing
pin springs in shotguns and firing springs in rifles, always insert snap
caps and pull the trigger(s). Snap Caps have high tech plastic exteriors, solid brass bases and spring loaded primers. Ideal for training,
working firearm action and dry firing. Made to factory specifications to allow smooth feeding through the magazine.
In sets of 2.
ARM811
ARM816
ARM809
ARM812
ARM808
.....
.....
.....
.....
.....
.223 Rem.
.243 Win.
.270 Win.
308 Win.
30-06 Sprgfd
For further information or bookings, please feel free to
contact us by mail, phone, fax or email at our regular
address.
A
LO DI
S
N
SO
76
LU
NG
RE
ARM800 . . . . . .10 Gauge
ARM801 . . . . . .12 Gauge
ARM815 . . . . . .16 Gauge
ARM802 . . . . . .20 Gauge
ARM803 . . . . . .410 Gauge
Ken Steinhauer of Alberta,
Canada is one of the most
ambitious and hard working
hunting outfitters there is.
He has definitely put in the
time and effort to make his
hunting operation one of
the very best anywhere.
Ken has an abundance of
game available in his area.
He has excellent numbers
of black bear, whitetail,
mule deer and moose. Ken's
spring "baited" black bear
hunts are done in May.
Sometimes the snow has
all gone by the middle of
April and in other years it
stays until the first week in
May. Although knowing the
Ken Steinhauer with trophy
weather conditions very far
Whitetail deer
in advance is impossible, most of his hunts are booked several
months in advance before the hunts are due to begin.
By hunting in May, Ken knows with a great deal of certainty, that
all his hunters will get to hunt in prime time. After June 1st, the
bears begin rubbing the fur off their hides.
All the black bear hunts are for six days and he only takes six
hunters at any one time. Since the black bear population is
so high Ken's area allows two bear to be taken on a hunter's
licence. The black bear are partially responsible for the decline
in the moose calf crop each Spring. Each hunter pays for a
licence which allows him to shoot two bears and that is what
Ken expects him to take. A wounded bear is not considered a
dead bear and no extra charge is made for the second bear. One
of the advantages of hunting with Alberta Native Guide Services
Ltd. is that hunters can shoot two bears on their licence.
The bait hunt is done out of tree stands strategically placed
over bait. Ken's operation has been very successful to date. He
considers this to be a trophy hunt because he encourages the
hunter to take the first good-sized bear he sees and then wait
for an even better sized bear or one of a different colour phase.
Each hunt is for two bears per hunter so there is a good chance
of getting two different coloured hides.
All hunters stay in motels or tented accommodation within
a comfortable camp while on the hunt with wholesome and
nutritious food carefully prepared and served. Hunters taken
each year are assured of a very memorable hunt. Since Ken's
operation is built on repeat clientele, a large number of his
Spring black bear hunters return to join him on his moose and
whitetail hunts.
Besides his baited hunts, Ken also offers a "spot and stalk" black
bear hunt in the fall. One guide is provided for each hunter with
accommodations being either in a motel or camp. All terrain
vehicles and half ton trucks are used to get hunters into the
prime locations to maximise opportunity at their desired game
animals. The bears are about 25% larger in the fall but more difficult to hunt.
TIO
100 Bullets
per box
50 Bullets
per box
VULKAN
Thick rear jacket section
CONE POINT BULLET
The perfect bullet where versatility is
concerned. The co-ordination between
tombac jacket and core material ensures
flexible adjustment to the resistance of the
target. The bullet mushrooms in a controlled manner, releasing uniform energy.
Pure lead core
Thin forward jacket section
RWS2496KS . . .
RWS26127KS . .
RWS28162KS . .
RWS30150KS . .
RWS30165KS . .
Crimping increases dependability
Since Norma introduced Vulkan in 1980, it has been their most popular
hunting bullet. The unique aspect of the Vulkan bullet is its inverted
jacket tip that protects it and prevent tip deformation.
The very rapid expansion of the Vulkan bullet leads in the majority of
cases to a rapid kill when shot in the heart/lung area.
NP66535 . . . .6.5mm 156 grns
NP67653 . . . ..30 cal 180 grns
NP69305 . . . .9.3mm 231 grns
RWS30200KS
RWS32181KS
RWS32224KS
RWS36247KS
.243 cal 96 grns
6.5mm 127 grns
7mm 162 grns
.308 cal 150 grns
.308 cal 165 grns
HUNTING BULLETS
HUNTING BULLETS
. . .308 cal 200 grns
. . 8mm 180 grns
. . 8mm 224 grns
. . 9.3mm 247 grns
TWIN CORE BULLET
Recent product development from
Dynamit Nobel. The clearly defined
separation of the cores ensures optimum
target ballistics. The jacket will break off
at the point of rupture, while the residual
body remains intact with an enlarged
cross-section. This allows hunters to rely
on cut hair at the point of entry.
NP67006 . . . 7mm 170 grns
NP67654 . . . .30 cal 200 grns
ORYX
Thick rear jacket section
RWS32181DK . . 8mm 181 grns
RWS36225DK . . 9.3mm 225 grns
RWS28154DK. . 7mm 154 grns
RWS30165DK. . .308 cal 165 grns
Pure lead core
Thin forward jacket section
Crimping increases dependability
Core soldered into jacket
To perform in varied hunting situations Oryx is designed with a core
bonded to the jacket. The bullet still expands rapidly, but the bonding
prevents a separation of the jacket from the core, This allows the bullet to penetrate deep into game to reach the vital organs, The Oryx is
unsurpassed in its design and is suitable for game such as deer, stag,
moose, wild boar and black bear.
NP66524 . . . .6.5mm 156 grns
NP67004 . . . .7mm 156 grns
NP67638 . . . ..30 cal 180 grns
NP67639 . . . .30 cal 200 grns
NP68001 . . . 8mm 196 grns
TIG BULLET
This bullet, developed by designer
Wilhelm Brenneke, is able to combine the
width and depth effect in the game. The
Brenneke bullets can be recognised from
their characteristic torpedo-type rail.
RWS30150T . . . . . .308 cal 150 grns
RWS32198T . . . . . 8mm 198 grns
RWS28162T . . . . 7mm 162 grns
RWS28177T . . . . 7mm 177 grns
TUG BULLET
Wilhelm Brenneke developed this bullet
that is more suited to to medium-to-heavy
hoofed game and gig game. The heavy,
rear lead-core ensures a high degree of
penetration. The sharp edge punches a
circular hole in the target.
RWS36293T . . . . . 9.3mm 293 grns
S
77
LU
NG
SO
A
LO DI
N
Some bullet types only available to order
RE
RWS30180T . . . . .308 cal 180 grns
TIO
CLOSEOUTS
C
Accessories will only fit Outers Rods
Phosphor Bronze Brushes
OU41974 . . . 22 calibre
OU41976 . . . .243,.257,6.5mm
OU41978 . . . .270,.280,7mm
OU41980 . . . .308 calibre
OU41982 . . . .338,.35,.375 calibres
OU41984 . . . .41,.44,.45 calibres
OU41986 . . . 10,12 gauges
OU41989 . . . 16 gauge
OU41991 . . . 20,28 gauges
OU41993 . . . 410 gauge
Rifle Wool Mops
OU42207 . . . 22,.243,.257,6.5mm
OU42211 . . . .270,280,7mm
OU42213 . . . .308.8mm
OU42215 . . . .338,.35,.375 calibres
OU42217 . . . .41,.44,.45 calibres
Shotgun Wool Swabs
OU42218 . . . 10, 12, 16 gauges
OU42222 . . . 20, 28 gauges
OU42224 . . . .410 gauge
Nylon Slotted Tips
OU42429 . . . 22 thru 280 calibres
OU42435 . . . 30 thru 32 calibres
OU42437 . . .338,.35,.375 calibres
OU42439 . . .41,.44,.45 calibres
Nylon Jag Tips
OU42415 . . . .22,.243,.257,6.5mm
OU42419 . . . .270,.280,7mm
OU42421 . . . .308 thru 8mm
OU42423 . . . .338,.35,.375 calibres
OU42425 . . . .41,.44,.45 calibres
Shotgun Slotted Tips
OU42409 . . . 10,12,16,20,28 gauges
OU42411 . . . .410 gauge
Nitro Solvent
OU42032 . . . 2 fl oz.
OU42030 . . . 4 fl oz.
OU42059 . . . 5 oz. aerosol
Gunslick Lubricant
OU42014 . . . Lubricant, 0.2 oz.
Standard Cleaning Kits
OU46225 . . . .338 - .375 calibre
OU46227 . . . .44 - .458 calibre
A
LO DI
S
N
SO
78
LU
O
S
E
O
U
T
S
Tornado Brushes
HOP1250 . . . . .22 calibre
HOP1253 . . . . ..243,.257
HOP1254 . . . . ..270,7mm
HOP1251 . . . . ..308 calibre
HOP1255 . . . . ..32cal /8mm
HOP1252 . . . . ..35 cal /9mm
HOP1256 . . . . ..38 calibre
HOP1257 . . . . ..44/ .45 calibres
HOP1260 . . . . .12 gauge
HOP1261 . . . . .16 gauge
HOP1262 . . . . .20 gauge
HOP1263 . . . . ..410 gauge
A1 Black
Phosphor Bronze Brushes
HOP1302P . . . .17 calibre
HOP1303P . . . .22 calibre
HOP1301P . . . ..243/ 6mm
HOP1304P . . . ..270,.280,7mm
HOP1305P . . . ..308 calibre
HOP1309P . . . ..35 calibre
HOP1316P . . . ..38 calibre
HOP1315P . . . ..44/ .45 calibres
HOP1311P . . . ..410 gauge
HOP1311AP . . .28 gauge
HOP1312P . . . .20 gauge
HOP1313P . . . .16 gauge
HOP1314P . . . .12 gauge
HOP1314AP . . .10 gauge
Gun Cleaning Swabs
HOP1317 . . . . ..410 gauge
HOP1317A . . . .28 gauge
HOP1318 . . . . .20 gauge
HOP1319 . . . . .16 gauge
HOP1320 . . . . .12 gauge
HOP1321 . . . . ..22/ .270 calibres
HOP1322 . . . . ..280/ .32 calibres
HOP1323 . . . . ..35/ .38 calibres
HOP1324 . . . . ..40/ .45 calibres
Adaptor, and Slotted Ends
HOP1401 . . Rifle to Shotgun Adap
HOP1422 . . .22 cal Slotted End
HOP1430 . . .30,.38,.45 Slotted End
HOP1441 . . .410-20 gauge Slotted
HOP1416 . . 16-12 gauge Slotted
Gun Care Products
HOP902 . . . No.9 Nitro Solvent 2oz
HOP905 . . . No.9 Nitro S Aerosol 2oz
HOPMDL Moisture Displacing
Lubricant, 4 oz.
Cleaning Rods & Kits
HOP1PS17 . Cleaning Rod 17 cal 3 pc
Steel w/knob ended tip
HOP3PA16 . 12-16 ga Shotgun, alum
HOP3PA41 . .410-20 ga Shotgun, Alum
HOPSGOU All Gauge Kit, no brush
F1
F1 Black
WM1
Model A1 Black — a semi-large knife for heavy duty use. The powerful
blade will withstand considerable stress and is superb to chop thanks to
its ergonomic grip. Since the full tang goes entirely through the handle,
it can be struck on the handle end without breaking the grip. Teflon
coated blade. Length: 280 mm, Blade length: 160 mm, Weight: 310 gms,
Handle: Kraton, Steel: VG-10, Sheath: Kydex.
FLKA1BLK . . . . . . A1 Army Knife Black w/kydex sheath
Model F1 & F1 Black — an extremely versatile knife suitable for the
most demanding tasks and yet comfortably fits all hand sizes. Drop
point blade design makes it a hunter’s favourite. Black model is teflon
coated. Length: 212mm, Blade length: 96 mm, Weight: 144 gms, Handle:
Kraton, Steel: VG-10, Sheath: Kydex
FLKF1K . . . . . . . . . F1 Field Knife w/kydex sheath
FLKF1B . . . . . . . . . F1 Field Knife Black w/kydex sheath
Model WM1 — a small and convenient knife that will appeal to people
who prefer a short blade for precision and safety and those with small
sized hands. Full tang design with Thermorun handle offers high levels
of comfort and safety. Length: 172 mm, Blade length: 70 mm, Weight:
90 gms, Handle: Thermorun, Steel: VG-10, Sheath: leather
FLKWM1 . . . . . . . . WM1 Knife w/kydex sheath
PL10
Blade
2-⁄”
PL20
Blade
2-⁄”
PL10S
Blade
2-⁄”
PL20S
Blade
2-⁄”
FL10
Blade
3-⁄”
FL20
Blade
3-⁄”
FL10S
Blade
3-⁄”
FL20S
Blade
3-⁄”
LIGHT WEIGHT FOLDING KNIVES
OEPL10 . .
OEPL10S .
OEFL10 . .
OEFL10S .
OEPL20 . .
OEPL20S .
OEFL20 . .
OEFL20S .
Pocket Lite
Pocket Lite 50% Serrated
Field Lite
Field Lite 50% Serrated
Pocket Lite
Pocket Lite 50% Serrated
Field Lite
Field Lite 50 % Serrated
NG
RE
Cleaning Cloths
OU42028 . . . Silicone Gun Cloth
L
TIO
OF-01a
MAILING ADDRESS:
(Full credit card statement address)
DELIVERY ADDRESS:
NAME
NAME
ADDRESS
ADDRESS
TOWN/CITY
TOWN/CITY
POSTAL CODE
POSTAL CODE
TELEPHONE
(
)
TELEPHONE
(
)
FAX
(
)
FAX
(
)
PAYMENT METHOD:
(Please do NOT send cash)
I wish to pay by Mastercard/Visa/Delta/Switch/Amex/Cheque/Postal Order (delete as appropriate)
I authorise you to charge/debit my account with the amount of £ . . . . . . . . . . . . . . *
* Any shortages on delivery charges or incorrectly totalled orders will be charged without prior notification.
My card number is:
Valid From or
Switch Issue no.
PRINT NAME OF
CARDHOLDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AUTHORISED
CARDHOLDER’S SIGNATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PRODUCT CODE
QTY
PRODUCT DESCRIPTION
Expiry Date
of card
CARD SECURITY CODE - Last 3 DIGITS (This is Essential)
see signature strip on reverse of card
CARD
ISSUER
CAL.
....................
...............................................
ACTION & MODEL
PRICE EACH
TOTAL PRICE
BACKORDER INSTRUCTIONS
YES
NO
If YES or BLANK we will ship available items now and back order remaining. Back Orders will be shipped without notification. If NO, out of stock items will be deleted from order and will not be charged for. In stock items will be shipped as normal.
SUBSTITUTE INSTRUCTIONS
YES
NO
If YES or BLANK we will substitute as follows: i.e. brass same calibre in available brand, shellholder same calibre in any
brand. If NO we will follow BACKORDER instructions above.
ORDER AMOUNT . . . . . . . . . . . .
✃
PACKAGING & DELIVERY . . . . . . .
....
TOTAL AMOUNT £
© 2007 Reloading Solutions Ltd
ORDER FORM
6, Cherwell Business Centre • Rowles Way • Kidlington • OX5 1LA • England
Phone: +44 (0)1865 378200 • Fax: +44 (0)1865 370123
email: [email protected] • website: www.reloadingsolutions.com
ORDERING TERMS
ORDERING TERMS & CONDITIONS
ORDERING INFORMATION
When placing a telephone order, please have all the required information ready for us to process your order correctly. You may
prefer to fill out the order form beforehand. Some items require that we know the cartridge, action manufacture, and action
model. Please ensure that you use product codes so we can make sure you get the correct items as quickly as possible. Please
do not hesitate to ask us to verify a product code. On mail-in orders a correctly completed order form is essential since orders
lacking information may cause delays. Please be sure to include a daytime telephone number so we can contact you regarding
your order if necessary. (We do not sell or disclose any customer information).
METHOD OF PAYMENT
We accept Mastercard, Visa, Delta, Switch, American Express, Certified Cheques, Money Orders, Personal Cheques and
Postal Orders. Personal cheques will be held for clearing prior to the shipment of your order, except for established customers. There is a £20.00 charge for all returned cheques. Any shortages on delivery charges or incorrectly totalled order will be
charged to your credit/debit card without prior notification. We cannot accept C.O.D.s. Please do not send cash as we cannot
be responsible for this method of payment.
INLAND DELIVERY
We use Royal Mail, Parcel Force, and select Carriers to deliver your order but the actual contents of the order will determine
which methods may be used. Please provide us with street addresses, since we cannot ship orders to Post Office Boxes. All
shipping methods will require a signature on delivery. All damages or shortages must be recorded on the delivery note before
accepting the package(s), failure to do so will prevent any claims at a later date. Any claims for damage or shortages must be
made in writing within 3 working days of receipt. All original packaging must be retained for inspection.
INTERNATIONAL SHIPPING
Any order shipped out of England must be prepaid in Sterling funds or charged to a credit card. To avoid delays on mail
orders please contact us for exact shipping charges. Orders will be shipped by the most economical but secure method. Certain
restrictions may apply so please contact us if in doubt.
BACK ORDERS
We try to avoid back orders from occurring by having plenty of inventory on hand, but occasionally they do happen. If we do
not expect to have an item available within 21 days, we will not back order the item(s) unless specifically requested to do so.
We will not automatically despatch backorders if prices for goods have changed dramatically.
RETURNS
No goods may be returned without obtaining a Returns Authorisation Number from Reloading Solutions Ltd. Without such
number we will not accept the return of any goods incorrectly ordered or no longer required. We will not accept any responsibility for goods which, in our opinion, have been the subject of undue wear and tear, accident, misuse, improper application or neglect. Reloading Solution’s opinion on this matter is final. The customer will be responsible for ensuring that all
approved returns are delivered to us and for providing proof of delivery of such return. If proof of delivery is not provided
then no credit or refund will be given. When returning any item please provide the following: i) a copy of the original invoice,
ii) Returns Authorisation Number, iii) the reason for return. The return of any item that was incorrectly ordered but correctly
supplied will be subject to a 30% restocking fee and must be in the manufacturer’s original packaging and in a resaleable condition. We reserve the right to refuse any returns arranged by the customer through COD.
PRICING
SEE SEPARATE PRICE LIST. Prices charged are those prevailing at the time of order. Prices quoted in any Reloading
Solutions publication are in £ Sterling, unless otherwise stated and are current at the time of printing. Reloading Solutions
reserves the right to amend prices at any time without prior notice to the customer.
All Retail prices quoted are inclusive of VAT, in accordance with prevailing legislation.
LIABILITY
Reloading Solutions will use reasonable endeavours to ensure that all information contained in any Reloading Solutions publication is correct. Reloading Solutions reserves the right to amend any information contained in any publication without prior
notice and does not accept any liability for any loss arising from any error or omission in any such publication. The customer
will be responsible for ensuring that the correct product codes are supplied and that the goods are fit for purpose for which
they are ordered.
Since individual handloading procedures, operations and safety practices are beyond our control, we disclaim all liability
for any damages which may result from reloading, or use of ammunition or any other product contained in any Reloading
Solution’s publication howsoever caused.
DESCRIPTION
..............................
3. . . . . . . . . . . . . . . .
..............................
4. . . . . . . . . . . . . . . .
..............................
5. . . . . . . . . . . . . . . .
..............................
6. . . . . . . . . . . . . . . .
..............................
7. . . . . . . . . . . . . . . .
..............................
8. . . . . . . . . . . . . . . .
..............................
9. . . . . . . . . . . . . . . .
..............................
10. . . . . . . . . . . . . . . .
..............................
11. . . . . . . . . . . . . . . .
..............................
12. . . . . . . . . . . . . . . .
..............................
13. . . . . . . . . . . . . . . .
..............................
14. . . . . . . . . . . . . . . .
..............................
15. . . . . . . . . . . . . . . .
..............................
16. . . . . . . . . . . . . . . .
..............................
17. . . . . . . . . . . . . . . .
..............................
18. . . . . . . . . . . . . . . .
..............................
19. . . . . . . . . . . . . . . .
..............................
20. . . . . . . . . . . . . . . .
..............................
21. . . . . . . . . . . . . . . .
..............................
22. . . . . . . . . . . . . . . .
..............................
23. . . . . . . . . . . . . . . .
..............................
24. . . . . . . . . . . . . . . .
..............................
25. . . . . . . . . . . . . . . .
..............................
26. . . . . . . . . . . . . . . .
..............................
27. . . . . . . . . . . . . . . .
..............................
28. . . . . . . . . . . . . . . .
..............................
29. . . . . . . . . . . . . . . .
..............................
30. . . . . . . . . . . . . . . .
..............................
31. . . . . . . . . . . . . . . .
..............................
32. . . . . . . . . . . . . . . .
..............................
33. . . . . . . . . . . . . . . .
..............................
34. . . . . . . . . . . . . . . .
..............................
35. . . . . . . . . . . . . . . .
..............................
36. . . . . . . . . . . . . . . .
..............................
37. . . . . . . . . . . . . . . .
..............................
38. . . . . . . . . . . . . . . .
..............................
39. . . . . . . . . . . . . . . .
..............................
40. . . . . . . . . . . . . . . .
..............................
41. . . . . . . . . . . . . . . .
..............................
42. . . . . . . . . . . . . . . .
..............................
43. . . . . . . . . . . . . . . .
..............................
44. . . . . . . . . . . . . . . .
..............................
45. . . . . . . . . . . . . . . .
..............................
46. . . . . . . . . . . . . . . .
..............................
47. . . . . . . . . . . . . . . .
..............................
48. . . . . . . . . . . . . . . .
..............................
49. . . . . . . . . . . . . . . .
..............................
50. . . . . . . . . . . . . . . .
..............................
81
LU
NG
SO
A
LO DI
S
..............................
2. . . . . . . . . . . . . . . .
RE
1. . . . . . . . . . . . . . . .
N
PROD#
R E LOA D I N G N O T E S
RELOADING NOTES
REMEMBER TO ORDER
TIO
N
e
w
P
r
o
d
NEW PRODUCTS
Hornady’s new Cam-Lock Trimmer with its unique micrometer-adjustable cutter may be the biggest thing in
case trimming since brass cases.
No other case trimmer within this price range features
a micro-adjustable cutting
head ! Based on the design
of Hornady’s earlier case
trimmer, this new model
is packed with many other
valuable features Hornady
customers have been asking
for. Unique Micro-Adjustable
Cutter, micrometer lets you
change settings from longer
to shorter in increments
of 1/1000” without ever
moving the case. Consistent
Case Lengths, thanks to the unique way the case is locked in place in the shellholder, all trim lengths are
accurately measured from the head of the cartridge, with no variation due to rim thickness, etc... Unique
One Finger Case Cam-Lock, just a light touch of the knob locks the case in place. Just a touch releases
it. No need to crank the locking knob. Large Diameter, Replaceable Cutting Head, new larger cutter
trims cases up to .50 calibre in diameter. Uses Standard Hornady Shell Holders & Pilots, uses Hornady’s
standard shell holder and the same pilots as their previous case trimmer (includes the seven most popular calibres - .22 cal, 6mm, .270 cal, 7mm, .30 cal, .38 cal, .45 cal). Taller Frame and Redesigned Handle,
the redesigned handle fits your palm and the taller frame means you won’t bang your knuckles on your
bench when trimming.
u
c
t
s
Hornady Case Trimmer Pilots
HRN390943
HRN390945
HRN390946
HRN390947
HRN390948
HRN390949
HRN390951
HRN390952
HRN390953
HRN390955
HRN390958
......
......
......
......
......
......
......
......
......
......
......
.22 Cal
6mm
.25 Cal
.6.5mm
.270 Cal
7mm
.30 Cal
.303 Cal
8mm
.338 Cal
.375 Cal
Bullet Dia.
.224
.243
.257
.264
.277
.284
.308
.312
.323
.338
.375
HRN390971 . . . . . . .17 Cal Pilot/Cutter
HRN390972 . . . . . . Extra Cutter
HRN050140 . . . . . . . . . . . . . . . . . . . .Hornady Cam-Lock Trimmer Kit
POCKET HANDWARMER
Ideal for those frosty and cold mornings or for
late afternoon sitting in a high seat. These handwarmers use solid fuel sticks within an insulated
hinged compartment to provide up to 10 hours of
continuous heat. Felt coated outer allows handwarmer to be put straight into the pocket or can
be carried in provided cotton pouch. Size: 115mm
x 65mm
RS13170 . . . . . .Handwarmer
RS13180 . . . . . .Solid Fuel Sticks, 12/pack
K_PAC CORROSION INHIBITOR
This is a high product for preservation of the
metal surface of all firearms and shotguns. The
substance of K-PAC evaporates slowly after
opening the packing and protects the outer surface of your gun by a non-visible protective film
against rust corrosion. Unlike other preservation
agents the odour from this substance is extremely low and does not contain nitrite, benzene,
morpheline or formaldehyde. One K-PAC protects closed space with a volume of 0.5m3 and a
humidity level of 60%. Two pieces would protect
the same volume but with a humidity level of 60
% and more.
DEER CARCASS INSECT NETS
A fine mesh carcass net made of strong nylon
and designed to protect deer carcasses from
insects. Available in two sizes. Colour: Green
RS13242 . . . . . .Carcass Net, 170cm x 110cm
RS13229 . . . . . .Carcass Net, 220cm x 160cm
RS13531 . . . . . K-PAC Corrosion Inhibitor
RCBS ROTARY CASE/
MEDIA SEPARATOR
RCBS87076 . . . . . . . Rotary Case/Media Separator
A
LO DI
S
N
SO
82
LU
NG
RE
In short order, separate the cleaned cases from cleaning media. Merely empty the cases and media from the
cases tumbler into the separator basket. With several
turns of the basket handle the media falls to the bottom of the separator, leaving the cases clean and ready
to use. The fine dust from the media is trapped inside
the separator. Heavy-duty plastic construction for years
of trouble-free service. Capacity about 180 .30-06 cases
with media.
TIO
N
e
w
P
r
o
d
u
c
VOYMAN . . . . . . . . Vihtavouri Reloading Manual 3rd Edition
Now you can quickly compare
headspace and bullet seating
depths within .001 of an inch.
The “Instant Indicator” quickly checks the headspace from
the case shoulder to the base.
This information is critical for
setting up your sizing die to
precisely achieve the correct
amount of shoulder bump.
(Note: for easiest die adjustment, consider the use of the
new Redding Competition
Shellholders.)
To compare bullet seating depths simply insert a standard Redding sizing
bushing of the proper bore diameter for the calibre you are using.
Supplied with instructions to check and quickly compare overall case lengths
and bullet base to ogive. Supplied with one bore diameter bushing.
RED27xxx . . . . . . . Redding “Instant Indicator” Complete
RED17xxx . . . . . . . Redding “Instant Indicator” w/o Dial Indicator
RED17999 . . . . . . . . Redding Dial Indicator
Cartridge
222 Rem . . . . . . . . . . . .
223 Rem . . . . . . . . . . . .
22-250 Rem . . . . . . . . . .
220 Swift . . . . . . . . . . . .
243 Win . . . . . . . . . . . . .
6mm P.P.C. . . . . . . . . . .
6mm B.R Rem . . . . . . .
6mm Rem . . . . . . . . . . .
25-06 Rem . . . . . . . . . . .
260 Rem . . . . . . . . . . . .
RED17109
RED17111
RED17106
RED17107
RED17114
RED17319
RED17317
RED17115
RED17120
RED17131
Cartridge
6.5mm x 55 . . . . . . . RED17132
280 Rem . . . . . . . . . RED17142
7mm-08 Rem . . . . . RED17139
7mm x 57 . . . . . . . . RED17138
7mm Rem Mag . . . . RED17136
308 Win . . . . . . . . . . RED17155
30-06 Sprg . . . . . . . . RED17148
300 Win Mag . . . . . RED17153
338 Win Mag . . . . . RED17163
Note: The “Instant Indicator” may be used for a family of cartridges with the
same shoulder angle. Just order the appropriate bullet diameter bushing.
Bore Diameter Chart
Cartridge
Bullet Dia.
Bore Dia.
Bushing No.
22 Cal
.224
.219
RED76219
6mm
.243
.237
RED76237
25 Cal
.257
.250
RED76250
6.5mm
.264
.256
RED76256
270 Cal
.277
.270
RED76270
7mm
.284
.277
RED76277
30 Cal
.308
.300
RED76300
338 Cal
.338
.330
RED76300
KM80000 . . . . Primer/Gauge Tool
Specify Cartridge. Refer to reference chart on page 38
K&M CARBIDE PILOT W/
FLUTES
K&M are now offering a new
tool for extracting the brass
that flows up the case wall and
into the shoulder to neck junction, primarily a result of the
case sizing process. Something
commonly referred to in the
benchrest community as the “dreaded doughnut”. The K&M Pilot is precision machined from solid carbide, it has 4 cutting flutes and is the ideal
complement to the K&M Micro-Adjustable Case Neck Turning Tool, see
page 64.
KM59517 . . . . . . . . .17
KM59522 . . . . . . . . .22
KM59524 . . . . . . . . .24/6mm
KM59526 . . . . . . . . .26/6.5mm
KM59527 . . . . . . . . .270
KM59528 . . . . . . . . .284/7mm
SIERRA BULK PACK BULLETS
Sierra has recently started packaging some of their most popular competition bullets in a 500 count bulk pack. These 500 count boxes are all bullets
of the same lot at a better high volume price. Many shooters have been buying 500 count boxes of the long range and specialty bullets for some time
since these have not been available in 100 count boxes. Availability of these
new 500 count bullets may be a little slow at first but we hope to increase our
inventory as they become available.
22 Cal. (.224)
SRA1400C . . 53 gr. HP Match
SRA1410C . . 52 gr. HPBT Match
6mm/.243 Cal. (.243)
6.5mm/.264 Cal. (.264)
7mm/.284 Cal. (.284)
SRA1903C . . .130 gr. HPBT Match
30 Cal. (.308)
SRA2155C . . .155 gr. HPBT Palma
NEW PRODUCTS
If you want the ultimate in hand
priming tools — the K&M Primer/
Gauge will fit the bill. Benchrest
shooters seat the primer until they
“feel” it just touch the bottom of
the primer pocket. Consistency
is the secret to seating - with the
K&M tool you have perfect consistency every time. This precision
instrument employs a dial indicator
and the gauge assembly takes into
consideration the errors within the
primer and the case head. Since
not all case rims are exactly the
same thickness or the anvils within
the primer are the same height the
Primer/Gauge perfectly matches
the case with the primer. Uses
LEE Autoprime shellholders to hold
cartridge case. Specify cartridge.
This 3rd Edition (revised)
is the result of several years
of testing and development
by Vihtavouri and Lapua in
Finland. Most popular U.S.
rifle cartridges are covered
in addition to many popular
European cartridges. Bullets
from Hornady, Lapua, Nosler, Sierra and Speer are listed in English and
Metric loadings. Most cartridges have loads listed for the 500 series powders where considered appropriate. This is an interesting and useful manual
especially since Vihtavouri powders are showing increasing popularity.
Hardcover, 360 pages
Designed for precision
shooters who are seeking
the ultimate performance
from their handloads.
s
K&M PRIMER/GAUGE
SEATING TOOL
VIHTAVOURI
RELOADING
MANUAL 3rd Edition
REDDING
“INSTANT INDICATOR”
Headspace & Bullet
Comparator
t
Are your details correct ? If not, please let us have any corrections so that we can ensure that you
receive information about new products and special promotions or offers.
Harrell’s
Custom Powder
Measures
see page 65
6, Cherwell Business Centre • Rowles Way
Kidlington • OX5 1LA • England
Butler Creek
Rifle Slings
see page 60
PAST
Recoil
Shields
see page 50
Mountain
Plains
Targets
see page 71
Redding
Competition
Reloading
Dies
see pages 23-29
Knives by Outdoor Edge
Shooter’s
Choice
Gun Care
see page 52
see pages 44-45
Stalking
Accessories
see pages 67-70

• RELOADING • SHOOTING • STALKING •

Transcription

Similar documents

SCI-Central Washington Chapter Rifle Raffle

Clinic Highlights Prerequisites Field Shooting Clinic Activities

Page 1 of 1 - Weaponeer.net

millenary - Audemars Piguet

Remington rebates

Iowa Sportsman June 2014

uhlan 21 - Small Arms Defense Journal

Frontiersman for Dummies 2

Enfield scoped P14 - Thames Valley Guns

Powdura Powder Coatings : Color Reference Guide