Muestrario de Refacciones para Multilith

Muestrario de Refacciones para Multilith

Muestrario de refacciones
Multilith®
IMPORTANTE:
Este es el Muestrario de Refacciones Comunes para Multilith®
Si usted desea ver un listado completo con todas las refacciones, consulte el
Catálogo de Refacciones para Multilith®.
Intrucciones
1. Identifique la figura (Drawing #) de la sección de su interés.
2. Identifique el número en la figura (Key #) de la parte que busca .
3. Utilice el número en la figura para identificar el número de parte (Part #) en la/s
página/s siguientes.
4. Ingrese a www.equiposgraficos.com y complete el formulario de cotización
incluyendo el número de parte y descripción.
5. Solicite asistencia a [email protected] o al +52(55) 5396 6580
Gracias por su compra
EFFECTUS GRAPHICUS ORTUS S.A. DE C.V.
www.equiposgraficos.com
Salónica 259 Col. Sector Naval. México D.F. 02080
Tel: +52 (55) 5396 6580
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD,
PART #
VARIABLE SPEED PULLEY
1250 O.S. - 1/2” Shaft
P-1629
1250 N.S. - 5/8” Shaft
P-1649
PART #
COMPENSATING SUCKER TUBE ASSEMBLY
EXTENDS 1/4” FURTHER.
••• Excellent for running envelopes and heavy stock.
1250 (Set of 2 w / block)
P-12259
1250 (Tube only)
P-12966
1850 (Set of 3 tubes only)
P-18990
1870 (Set of 4 tubes only)
P-18170
179.90
120.00
V-BELTS
35” Motor to printing head
P-4904
9.00
33” Pump to motor
compound pulley
P-1689
7.50
32” Compound pulley
to machine
P-1688
7.50
30” Compound pulley
to machine
P-1686
6.50
26” To machine
P-4903
6.90
49” Conveyor drive
P-1690
8.00
34” New style pump
to motor
P-1695
7.50
RATCHET PAWL ARM ASSEMBLY
P-12979
FLAT DISC SUCKER FOOT
C
Complete
(A) Nut
(B) Ball retainer
(C) Bracket
(D) Screw
(E) Washer
(F) Sheet separator
D&E
B
A
P-12112
P-497
P-1105
P-12113
P-149
P-557
P-12114
.80
2.50
PAWL LEVER For single sheet feed
1330, 1360, 1650, 1860, 1960
P-13563
24.90
DRIVE LEVER ARM ASSEMBLY
••• Made of 1/4” solid cast stock for longer life and durability.
1250
P-12927
68.00
1330, 1360
P-13927
64.00
1650
P-16927
59.80
1850
P-18927
58.90
68.00
FEEDER LINKAGE DRIVE LEVER (near delivery)
29.90
.60
9.00
28.90
.60
.60
.90
SHEET SEPARATOR - 1360
P-13114
P-1552
SUCKER FOOT
For Multilith 1218 & for Toko 4700, 4750
P-5203
SHEET SEPARATOR BRACKET ASSEMBLY
F
107.90
32.00
103.80
136.00
P-12732
24.50
FEEDER PULLOUT ROLLER
Roller with bearing
P-12125
Bearing only
P-1371
Spacer (on sides)
P-12536
Spring
P-12181
34.00
5.50
6.00
1.90
SPRING For feeder pullout roller
P-12386
2.90
1.30
UPPER FEED ROLL HOLDER
SHEET SEPARATOR For TOKO 1218
B
H
C
A
D
H
I
G
D
3.00
P-5065
P-12128
P-537
P-624
P-566
P-12164
P-668
P-586
P-653
P-12069
P-5285
82.90
59.90
2.90
.60
.60
9.90
.60
.60
1.00
2.60
3.90
F
Complete
(A) Center blower
(B) Thumb nut
(C) Lockwasher
(D) Washer
(E) Bracket
(F) Retaining ring
(G) Washer
(H) Spring washer
(I) Valve stem
(J) Hose - 27”
IMPROVED
HUB FOR P-13085 OSC ROLL
SUCKER TUBE - 1650
O-RING For sucker tube
7
1250 N.S.
1250 O.S.
CENTER BLOWER KIT
E
J
P-128114
A
D
B
E
P-12115
P-12274
16.50
29.90
HAND CRANK ASSEMBLY
••• Made of solid white brass which helps prevent stripping.
Complete
(A) Stud
(B) Handle
(C) Spring lock (inside)
(D) Screw
(E) Nut
(F) Spring
(G) Steel ball
P-12955
P-36962
P-36961
P-36959
P-874
P-492
P-12909
P-755
140.00
19.90
24.90
2.40
.60
.60
2.50
1.90
TABLE PAWL RELEASE LEVER
P-13440
P-16174
P-5329
86.90
1250
1330, 1360, 1650
P-12969
P-13969
69.00
69.00
12.60
A
.60
(A) CONVEYOR DRIVE SPROCKETS - O.S.
Front feed roller
Rear feed rolller
SUCTION FEET
Double stem
Single stem
P-12170
P-12990
99.90
160.00
PILOT SCREW
P-12104
1.70
B
P-12555
P-12559
11.60
11.60
(B) TENSION SPROCKET P-12522
4.90
TENSION ROLLER
P-12425
Solo una muestra de nuestro catalogo www.equiposgraficos.com
14.00
2650, 2850, 4150, 4250, 1330, 1360, 1315CD, 1650, 1820, 1860, 1870, 1960
PART #
CONVEYOR TIMING PULLEY - N.S.
-Conveyor roller
P-4242
CONVEYOR TIMING PULLEY - N.S.
-Front feed roller
P-4257
CONVEYOR DRIVE PULLEY - N.S.
-Rear feed roller
P-4258
PART #
80.00
30.00
20.00
SKID ROLLER ASSEMBLY
Works with P-12359 shown below.
A
C
B
Narrow wheel 1250
P-12434
(A) Arm
P-12436
(B) Roller
P-12454
(C) C-ring
P-680
Wide wheel 1850
P-18434
(A) Arm
P-12436
(B) Roller
P-12532
(C) C-ring
P-680
(D) Bushing (comes with Roller P-12532)
P-799
THUMB SCREW
P-311
SKID WHEEL HOLDER
P-12359
SKID ROLLER ASSEMBLY
For old design skid wheels that
Complete 1250
Arm only
Wheel only
Bushing (included w/ P-12532)
C-ring
CONVEYOR PAPER RETAINER
GUIDE ASSEMBLY - 1360
59.90
44.90
14.90
.60
69.90
44.90
14.90
.60
1.80
.80
uses posts.
P-12501
P-14492
P-12532
P-799
P-680
P-12433
P-13403
6.90
19.90
PAPER FEED FRAME LEVERS
1250 Old design (straight, no tab)
1250 O.S. & L.W. (straight, with tab)
1250 N & DOM. (bent, with tab)
1650 (straight)
1650 (bent)
P-12165
P-12156
P-12151
P-16156
P-16151
36.90
24.90
36.90
24.90
36.90
CAM LEVER
1250
1650
P-12155
P-16155
42.90
46.90
18.40
7.40
Special cloth for easier feeding
P-4955
32.00
P-12924
P-191
FEELER FINGER
PILOT SCREW
P-18527
14.80
P-12708
36.40
P-12141
P-3073
FEED FRAME ROLLER
1250
1330, 1360, 1650
P-12157
P-13157
65.70
76.00
5.50
.60
PAPER GUIDE SPRING - 1850 & 1860
TAPE BAR
402.60
15.00
35.90
.60
.60
.60
3.30
7.50
2.00
89.90
.60
89.90
1.90
1.60
.60
.90
SPECIAL MICRO ADJUSTING NUT & STOP
For upper feed roll adjustment
P-12135
11.50
••• NO TOOL NEEDED FOR FAST & EASY ADJUSTMENT!
P-4957
PAPER GUIDE SPRING
1250
SCREW
P-13703
P-13483
P-13359
P-225
P-635
P-1811
P-1415
P-13497
P-7220
P-13492
P-18
P-13434
P-1807
P-11795
P-698
P-4788
69.90
59.90
14.90
1.80
.60
CONVEYOR FEED TAPES
Regular plastic
REGISTER BAR ASSEMBLY (Complete)
(A) Support rod
(B) Register bar with scale
(C) Screw
(D) Lockwasher
(E) Washer (comp. assm. takes 2)
(F) Spacer
(G) Adjusting block (comp. assm. takes 2)
(H) Thumb screw (comp. assm. takes 3)
( I ) Skid roller and block assm. - short
(J) Set screw (not shown)
(K) Skid roller and block assm. - long
(L) Thumb screw
(M) Brass plug (short) (not shown)
(N) Retaining ring (not shown)
(O) Brass plug (long) for thumb screw “H”
12.90
4.90
FOUR FINGER SHAFT ASSEMBLY
-Complete 1250 New style (pyramid cam - no notch)
P-12393
-Complete 1250 Domestic (tear drop cam)
P-12387
-Complete 1250 M / MG (notched pyramid cam & tear drop cam)
P-12381
THREE FINGER SHAFT ASSEMBLY
-Complete 1250 Old style
P-12388
PAPER HOLD ATTACHMENT
-Complete 1250
P-12840
156.00
110.90
120.00
83.90
239.90
IMPRESSION GRIPPER SHAFT & ARM ASS’Y.
Complete
P-12203
130.00
Arm assembly
P-12207
89.90
Shaft only
P-12205
28.90
Arm only
P-12197
88.00
IMPRESSION CYLINDER ADJUSTING SEGMENT
EJECTOR PIN BAR - Universal for old & new style.
1250 (7 Pin)
P-12249
69.90
P-12733
31.80
Solo una muestra de nuestro catalogo www.equiposgraficos.com
8
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD,
PART #
D
A
B
PART #
IMPRESSION GRIPPER HOLDER ASSEMBLY
Complete
P-12182
(A) Finger O.S.
P-12245
(A) Finger N.S.
P-12237
(B) Holder
P-12189
(C) Screw (not shown)
P-12187
(D) Screw
P-96
(E) Washer (not shown)
P-586
39.90
5.50
15.00
29.90
1.00
.60
.60
BUSHING For impression cylinder adjustment
1850 Non-op. side
P-18400
32.00
CYLINDER GEARS
Master (plate)
P-12313
Blanket
P-12214
Impression
P-12191
187.90
213.90
229.90
••• All gears are hardened for longer life.
BLANKET CYLINDER SHAFTS
1250 (.750 Dia.)
1250 (.010 Oversized dia.)
1330, 1360, 1650 (.1.125 Dia.)
1330, 1360, 1650 (.030 Oversized dia.)
1850 (1.125 Dia.)
1850 (.030 Oversized dia.)
P-12290
P-12302
P-13290
P-13302
P-18290
P-18302
64.90
89.90
177.90
177.90
219.90
325.00
CLAMP COMPLETE - Trail End
(A) R.H. Bracket
(B) Clamp
(C) Special Nut
(D) Retaining Ring
(E) Spring
(F) L.H. Bracket
(G) Round Head Screw
(H) Lockwasher
(I) Pin Bar with Lever
(J) Spring-Extension
(K) Thumb Screw
(L) Support
(M) Flat Head Screw
P-13790
P-13377
P-13389
P-11991
P-666
P-13724
P-13379
P-194
P-623
P-13323
P-13309
P-11783
P-16357
P-652
191.00
12.50
84.50
3.10
.60
2.00
12.50
.60
.60
69.90
2.10
9.00
25.00
.60
CAM BAND - 1250 O.S. & N.S.
For blanket cylinder
P-12178
80.00
MASTER CYLINDER ADJUSTING WRENCH
1250
1250
1360
1360
1960
O.S.
N.S.
(13” clamps)
(16-1/2” clamps)
P-12266
P-12236
P-13266
P-13236
P-19236
MASTER CYLINDER CLAMP LOCK LINK
1330, 1360, 1650
P-13299
77.90
77.90
39.90
32.00
66.00
32.00
1250 (10 X 15) MASTER CYLINDER ASSEMBLIES
BLANKET CYLINDER CLAMP KIT
Complete (Trailing 11x17) P-14258
(A) Screw
P-12204
(B) Spring
P-12390
(C) Pin bar
P-12922
(D) Bracket
P-14003
(E) Nut bar
P-14004
(F) Screw
P-12921
80.00
4.50
.90
31.00
9.80
8.00
1.00
MASTER CYLINDER UPGRADE KIT
1650
P-13385
220.00
Lead Edge - complete
(A) Screw
(B) Thumb screw
(C) Nut (used on P-12788 only)
(D) Nut (used on P-12790 only)
(E) Handle (used on P-12790 only)
(F) Screw
(G) Pin bar (18 point*)
(H) Clamp only - not sold alone
(I) Adjusting screw
(J) Taper pin
(K) Nut
(L) Stem
(M) Retainer (used on P-12790 only)
(N) Spring (used on P-12790 only)
P-12788
P-159
P-1095
P-1898
P-12796
P-12761
P-12770
P-12760
-----P-12812
P-421
P-497
P-12793
P-12797
P-12762
100.00
.60
6.00
3.30
16.00
14.00
1.90
24.90
----41.00
.70
.60
12.50
17.90
2.90
ACTUATING TOOL For plate cylinder latch
1330, 1360, 1650
P-5888
49.90
IMPROVED
••• MADE OF ALLOY STEEL DIECAST FOR LONGER LIFE
& GREATER DURABILITY.
MASTER CYLINDER HOLD DOWN BRACKET - 1360, 1650
P-13357
9
72.50
PIN BAR CLAMP Master cylinder (10 X 15)
18 Point - 10” long
P-12760
24.90
CLAMP Blanket cylinder
17 Point - 9-3/4” long
P-12922
31.00
Solo una muestra de nuestro catalogo www.equiposgraficos.com
2650, 2850, 4150, 4250, 1330, 1360, 1315CD, 1650, 1820, 1860, 1870, 1960
PART #
PART #
(A) WATER DUCTOR PIVOT - 1250 N.S., LW (11X17)
A
3/8” Bore
P-12322
19.90
(A) WATER DUCTOR PIVOT - 1250 O.S. (10 X 15)
B
C
7/16” Bore
P-12535
SCREW - O.S. & N.S.
P-84
PLASTIC BOTTLE RECEPTACLE VALVE
P-12347
WATER FOUNTAIN HOSE
1250, 1850 O.S. (10-1/2”) P-1189
1850 N.S. (19”)
P-1181
419.80
520.00
410.00
399.90
.60
52.90
36.00
50.00
3.00
14.90
.60
5.90
.60
23.00
16.00
18.00
.60
7.50
.60
1.20
6.00
3.50
6.00
.60
.60
.60
5.90
5.90
3.90
47.70
33.90
42.00
36.00
51.00
17.00
.60
.60
64.80
74.50
2.50
14.30
1.80
5.00
BOTTLE, CAP & ADAPTER 1250 N.S., 1360,1850,1962
(Bottle sits in black plastic receptacle on
side of water frame)
1 Quart assembly
2 Quart assembly
P-1912
P-1921
18.00
59.80
BOTTLE, CAP & ADAPTER 1250 O.S.
(Bottle sits directly in water fountain)
1 Quart assembly
2 Quart assembly
P-1911
P-1920
19.80
59.80
.60
(B) EQUALIZER PIVOT - 1330, 1360
P-13322
29.90
(C) PIVOT HOUSING ASSEMBLY - 1330, 1360
P-13535
37.50
DRIVE DISC For water form roller
P-12419
16-1/2” ANGULAR ADJUSTING CLAMP ASSEMBLY
Complete (1250)
P-12702
Complete (1360, 1650)
P-13702
Sub assy. - items (A) - (CC) (1250)
P-12717
Sub assy. - items (A) - (CC) (1360, 1650)
P-13717
(A) Screw
P-161
(B) Pin bar (tail) - 22 point (1250)
P-12746
(B1) Pin bar (tail) - 11 point (1360, 1650)
P-13746
(B2) Pin bar (tail) - 13 point (1360, 1650)
P-13659
(C) Thumb screw
P-1067
(D) Bracket
P-12729
(E) Lockwasher
P-624
(F) Collar
P-927
(G) Set screw
P-3
(H) Shaft
P-12726
( I) Lateral adjusting block
P-12736
(J) Adjusting block
P-12734
(K) Retaining ring
P-664
(L) Adjusting wheel
P-12744
(M) Washer
P-1887
(N) Spring washer
P-650
(O) Shoulder screw
P-8090
(P) Pointer
P-12745
(Q) Spacer cam
P-1402
(R) Screw
P-172
(S) Screw
P-191
(T) Lockwasher
P-623
(U) Retainer
P-12738
(V) Shoulder screw
P-8089
(W) Spring
P-12724
(X) Bracket (1250)
P-12716
(Y) Lead retainer
P-12751
(Z) Pin bar - (lead) - 22 point (1250)
P-12739
(Z1) Pin bar - (lead) - 13 point (1360, 1650)
P-13739
(Z2) Pin bar - (lead) - 11 point (1360, 1650)
P-13652
(AA) Clip nut
P-12749
(BB) Screw
P-10323
(CC) Set screw
P-1089
(DD) Shelf
P-12705
(DD) Shelf (1360, 1650)
P-13705
(EE) Screw
P-12375
29.90
14.90
PIN ASSEMBLY For water fountain roller
Short 1-7/8” shaft
Medium 2-1/8” shaft
Long 3-3/16” shaft
P-12688
P-12687
P-12691
COLLAR (For pin assembly listed above)
1/2” for short pin
P-12371
7/8” for long/medium pin
P-12370
20.50
12.00
SHAFT For water fountain roller
P-12402
14.00
DRIVE COLLAR For Water fountain roller
••• Made of steel for longer life.
For non-operators side
P-12417
12.50
SCREW
P-840
A
PAWL - Water / Ink ratchet P-12268
(A) 1250
B
PAWL - Water / Ink ratchet
(B) 1330, 1360, 1650, 1850, 1960
P-13268
D
A
B
C
E
9.90
9.90
9.90
5.90
16.00
34.90
RETAINER For water oscillating roller
(A) Hex cap nut
(B) Thumb nut
(C) Spring
(D) Retainer
(E) Stud (stem)
P-470
P-538
P-12413
P-12560
P-7053
.60
2.20
1.50
13.00
9.90
BEARINGS For “Multi Flow” Water oscillator.
Operators side
Non-operators side
P-5770
P-5775
25.50
32.50
BEARING SHIELD (need 2)
For lower ink form roller on 1820 second color head
P-1820000
6.00
FORM ROLLER KNOBS
Upper ink form
Lower ink form
Water form
P-12489
P-12491
P-12405
SET SCREW (all knobs)
P-8
SEPARATING CAM For ink form roller
1250 O.S. (10 X 15)
P-12864
1250 N.S. (11 X 17)
P-12451
TAPER PIN O.S.
P-441
TAPER PIN N.S.
P-439
29.90
29.90
36.90
.60
39.90
6.40
.60
.60
Solo una muestra de nuestro catalogo www.equiposgraficos.com 10
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD,
PART #
INK IDLER GEAR - Bushing included
1250 O.S. (10 X 15)
P-12455
1250 N.S. (11 X 17)
P-12446
BUSHING
P-1236
PART #
34.00
32.50
COMPOUND PULLEY
P-4259
65.00
P-13593
5.80
P-14001
P-18001
P-12587
P-18587
P-12593
P-12591
P-5061
P-12617
P-18617
P-7069
259.90
259.90
119.90
119.90
59.90
3.10
2.00
72.90
72.90
6.90
1250 O.S., W, LW (10 X 15 & 11 X 17)
P-12773
256.00
WASH UP BLADE
*Fits our wash up attachment only.
P-5030
1.60
CLUTCH WEIGHT - 1360
INK IDLER GEAR - Does not use bushing.
1360, 1650
A
B
P-13457
72.00
DOG For oscillating rollers
(A) Water
P-12428
(B) Ink
P-12463
27.40
32.00
WORM For ink & water oscillating rollers
P-12464
HOLD DOWN SCREW
P-12494
45.90
1.60
IDLER ROLLER BUSHING - 1650
P-11411
ROLLER SUPPORT
1330, 1360
P-13915
INK & WATER DUCTOR ARM
1250 N.S. (steel)
P-12321
INK & WATER DUCTOR LATCH
1250 N.S.
P-12338
3.80
10.50
5.50
1) INK & WATER DUCTOR ARM
1250 O.S. (Brass)
P-12607
30.00
2
2) INK DUCTOR LATCH No bend
1250 O.S. (LH. & R.H.)
P-12546
1850
P-18546
8.00
14.90
3) INK DUCTOR LATCH - With bend
1250 W (R.H.)
P-14546
1250 W (L.H.)
P-14338
9.90
9.90
4
5
4) RIGHT HAND SPRING - Ink & water ductor latch
1250 O.S. (10 X 15)
P-12575
3.90
1250 N.S. (11 X 17)
P-12336
1.70
5) LEFT HAND SPRING - Ink & water ductor latch
1250 O.S. (10 X 15)
P-12551
1250 N.S. (11 X 17)
P-12331
INK & WATER RATCHET WHEEL
1250, 1850
P-12239
1960
P-19239
SNUBBER - Ink & water ratchet lever
P-7058
Complete 1250
Complete 1850
(A) Pulley only 1250
(A) Pulley only 1850
(B) Clutch shoe (set of 4)
(C) Spring
(D) Liner
(E) Clutch drum 1250
(E) Clutch drum 1850
(F) Pilot screw
24.90
1
3
CLUTCH PULLEY ASSEMBLY
INK WASH UP ATTACHMENT
••• Universal for old & new style.
4.00
1.50
29.90
57.50
7.50
A
INK FOUNTAIN BLADE
1650
1960
Blade 1850 only
11
P-16233
P-19079
P-18079
108.00
99.90
69.90
C
OLD STYLE DRIVE SHAFT ASSEMBLY
Complete
(A) Pinion gear - (black-stamped “O”)
(B) Taper pin
(C) Drive shaft
P-12835
P-12854
P-435
P-12869
128.00
34.00
.80
94.90
Complete
(A) Pinion gear - (silver)
(B) Taper pin
(C) Drive shaft (only)
P-12837
P-12865
P-435
P-12869
128.00
34.00
.80
94.90
PILOT SCREW For pulley - both styles
P-8068
A
INK FOUNTAIN ASSEMBLY - 1250 O.S. & N.S.
••• Designed with replaceable end caps & deeper well for 50% more ink capacity.
Complete
P-12778
319.80
Fountain only
P-12789
180.00
Thumb screw (14 total)
P-1570
6.00
Wire
P-35084
2.50
Clamp
P-12082
30.00
Screw for clamp
P-12907
3.40
Blade 1250 (10-1/4” X 1-3/4”)
P-12079
44.00
Blade 1250 (10-1/4” X 3”)
P-12233
70.00
B
9.90
B
5.90
C
NEW STYLE DRIVE SHAFT ASSEMBLY
With long shank gear. For use with hardened cylinder gears.
Complete
(A) New style gear
(B) Taper pin
(C) Drive shaft
P-12577
P-12581
P-435
P-12583
PILOT SCREW For pulley
P-8067
DRIVE SHAFT ASSEMBLY - 1360, 1650
Complete
(A) Pinion gear
(B) Taper pin
(C) Drive shaft
P-13837
P-13581
P-435
P-13869
Solo una muestra de nuestro catalogo www.equiposgraficos.com
102.00
32.00
.80
69.00
5.90
189.90
24.90
.80
172.00
2650, 2850, 4150, 4250, 1330, 1360, 1315CD, 1650, 1820, 1860, 1870, 1960
PART #
SWITCH ASSEMBLY
Complete
Start (green) 1250 N.S.
Stop (red) 1250 N.S.
PART #
P-12566
P-12829
P-4062
189.90
55.00
58.90
SWITCH REPLACEMENT KIT 1330, 1360
Consists of:
1 ea. stop switch (red) & start switch (green),
1 mounting plate, 2 switch holders, 10 wire terminals.
Also includes installation instructions.
P-9828
109.80
ALTERNATE ACTION SWITCH
1960
P-4060
72.50
PUMP SWITCH
1330, 1360
P-4470
GRIPPER BAR CHAINS
1250 (53-3/4” long X 1/2” wide)
1850 (54-1/4” long X 1/2” wide)
Carrier link - 1250, 1850
P-121100
P-181100
P-9406
26.90
34.90
4.50
For Press Specialties chain delivery - N.S.
(51-1/4” long X 1/2” wide)
P-8944
66.00
For Press Specialties chain delivery - O.S.
(50-3/4” long X 7/16” wide)
P-8933
78.00
Gripper chain - TOKO 1218
Carrier link - TOKO 1218
P-8971
P-8736
38.00
18.90
B
A
D
G
C
H
F
24.90
I
1
(1) TOGGLE SWITCH
For drive motor & pump (includes screws)
1250 O.S.
P-12305
77.90
.60
(2) MOMENTARY TOGGLE SWITCH
1250 L.W.
P-4056
30.00
COUNTER
With bracket & arm
With bracket & no arm
Counter only 1250N, 1360
P-12996
P-12954
P-12952
124.90
99.90
169.90
COUNTER ARM ONLY
P-12942
29.90
K
J
A
E
B
I
D
C
G
“QUICK CHANGE” UPPER EJECTOR ROLLER ASSEMBLY
••• Adjustable, gear driven with a knurled shaft for quick removal and easy access.
P-12616
P-12558
P-12604
P-12584
P-12612
P-12600
P-1444
P-12611
P-12621
P-12782
P-12590
P-12618
314.90
128.00
1.60
29.90
38.00
29.90
4.20
38.00
16.00
75.00
9.90
4.90
STRIPPER FINGER - 1650 CD (1615)
P-162281
P-181590
GRIPPER BAR ASSEMBLY
(WITH BRASS COLORED ANVIL
Complete 1250
Complete 1330, 1360
Complete 1850
Complete 1960
(A) Finger
(B) Screw
(C) Holder
(D) Spring
(E) Anvil only 1250
(E) Anvil only 1330, 1360
(E) Anvil only 1850
(E) Anvil only 1960
(F) Screw
(G) Locking collar
(H) Shaft assembly 1250, 1330, 1360
(H) Shaft assembly 1850
( I ) Stud
(J ) Nut
(K) Cam roller
P-120990
P-130990
P-180990
P-190990
P-121020
P-12187
P-121061
P-121080
P-121090
P-131090
P-181090
P-191090
P-44
P-734
P-121010
P-181010
P-4600
P-522
P-1447
340.00
350.00
490.00
600.00
1.10
1.00
14.00
1.00
134.00
199.90
269.90
376.00
.60
10.70
69.90
79.90
5.00
.60
6.90
1250, 1360
P-30733
105.90
GRIPPER BAR REPAIR KITS For Press Specialties
Consists of the most commonly replaceable parts on your gripper bar assembly.
(Less anvil & shaft where noted)
1217 (4 finger)*
1217, 1250 (5 finger)*
1250 (4 finger)**
1252 *
P-30745
P-30746
P-30747
P-30748
248.00
248.00
248.00
248.00
* does not come with shaft or anvil.
** comes with shaft but no anvil.
••• ELIMINATE COSTLY DOWNTIME WITH YOUR OWN
EMERGENCY KIT FOR YOUR MODEL PRESS.
REPAIR KITS FOR ALL MULTILITHS
5.90
BACK JOGGER LEVER ASSEMBLY
1850 CD (1815)
K
GRIPPER BAR REPAIR KIT
Consists of the most commonly replaceable parts on your gripper bar assembly.
(Less anvil & shaft) For Multilith style gripper bars only
H F
Complete 1250 N.S.
(A) Rod assembly
(B) Spring
(C) Arm assembly L.H. & R.H.
(D) Arm assembly R.H.
(E) Roll assembly
(F) Roller
(G) Arm assembly L.H.
(H) Roller
(I) Shaft & gear assembly
(J ) Wheel
(K)Spring
J
••• MADE OF YELLOW BRASS FOR HIGHER TENSIL STRENGTH.
WIRE MOUNTING SCREWS For P-12305
1250 O.S.
P-252
2
E
59.90
Master kit
Junior kit
Nut kit
Screw kit
Pin kit
Spring kit
Washer & ring kit
P-1776 - 435 pcs.
P-30328 - 217 pcs.
P-1772 - 60 pcs.
P-1773 - 62 pcs.
P-1774 - 86 pcs.
P-1775 - 85 pcs.
P-1777 - 136 pcs.
359.80
199.90
44.80
159.80
52.90
139.80
63.90
Solo una muestra de nuestro catalogo www.equiposgraficos.com 12