E-grip Catalog

Transcription

E-grip Catalog

E-GRIPS
Pulling
Grips
TM
Strain
Relief
Grips
Support
Grips
E-GRIPS
Wire Mesh Products From Ericson
TM
1-800-ERICSON (374-2766)
www.ericson.com
Index
Introduction................................................................................................................................................................................1
SUPPORT GRIPS
How To Select A Support Grip..........................................................................................................................................2-4
Standard Duty Support ......................................................................................................................................................5-8
Heavy Duty Support ................................................................................................................................................................9
Light Duty Service Drop Support ....................................................................................................................................10
Conduit Riser Support....................................................................................................................................................11-14
Bus Drop Grips / Safety Springs.........................................................................................................................................15
Notes............................................................................................................................................................................................16
PULLING GRIPS:
How to Select A Pulling Grip ............................................................................................................................................17
Light Duty Junior Grips..................................................................................................................................................18-19
Utility Grips ..............................................................................................................................................................................20
Notes............................................................................................................................................................................................21
STRAIN RELIEF GRIPS:
How To Select A Strain Relief Grip .............................................................................................................................22-23
Wide Range Strain Relief Grip............................................................................................................................................24
Cord and Deluxe Cord Features.........................................................................................................................................25
Cord Grips ..........................................................................................................................................................................26-28
Deluxe Cord Grips............................................................................................................................................................29-30
“I”-Grips......................................................................................................................................................................................31
Notes............................................................................................................................................................................................32
TECHNICAL REFERENCE:
Working Load and Safety Factor Consideration ........................................................................................................ 33
Lace & Rod Closing Instructions ...................................................................................................................................... 34
Selecting Proper Sized Pulling and Support Grips ..............................................................................................35-36
Notes............................................................................................................................................................................................37
Cross Reference ................................................................................................................................................................38-49
Notes............................................................................................................................................................................................50
1-800-ERICSON (374-2766) • www.ericson.com
Introduction
ERICSON E-GRIPS - WIRE MESH PRODUCTS
FOR OVER 90 YEARS...
Ericson Manufacturing Company has been an industry leader that provides products for the safe use
and management of temporary power and temporary lighting products and systems.
Ericson wire mesh grips are used in a wide variety of cable pulling, strain relieving and weight support
applications. Wire mesh grips have traditionally been used in the utility, industrial, mining, construction
and OEM markets but find new and interesting applications in the communications, information, military,
medical, and aerospace industries.
QUALITY
We are certified to the latest ISO9001 certified Quality Standards and are known throughout the
industry for manufacturing the highest quality products available. We constantly test and measure
the quality of our products to meet or exceed your expectations.
Ericson quality wire mesh and related products are
100% manufactured in the USA
MADE IN THE USA
1
Support Grips - Standard Support, Heavy Duty Support, Service Drop, Conduit Riser Grips,
and Bus Drops
Solid eye assemblies provide superior
reinforcement designed to hold the weight
for electrical cables as it hangs in vertical,
sloping, or horizontal positions.
EYE STYLE:
Four different eye styles are available per your
method of utilizing the support grip.
Single, Double (shown), Offset, and Universal Bale.
Flag label shows catalog
number, full description
containing diameter range,
barcode, mfg date, and
MADE IN USA!
Ericson E-Grip Support Grips are designed to hold the weight of cable in a
vertical, horizontal, or sloping position. Support grips serve an important
function as electrical cables must be supported or their dead weight can
cause excessive strain or pullout at the connections resulting in a power
failure. Ericson E-Grips are used within any application that requires the
mechanical support of cable, metal rods, hose, and tubing. Specific
applications include buildings, utility poles, excavations, mine shafts,
towers, elevators, terminators, or other structures.
MESH STYLE:
Three different mesh styles of nonmagnetic tinned bronze are available for
anything from light to heavy duty supporting requirements. Closed Mesh are
for fitting over a cable end when exposed and a Split Mesh (Lace or Rod) is
utilized when the cable end is not exposed.
An endless mesh weave provides installation ease onto the cable, allows for
adjustments, and provides a reusable support grip without the need for
special skills or tools. Conforms to shape of cable or object being supported
and permits cable to expand and contract without loss of holding action.
2
Support Grips - Standard Support, Heavy Duty Support,
Service Drop, Conduit Riser Grips, and Bus Drops
Double
How to select the correct Support Grip.
Step 1 Refer to the chart below to determine the Support Grip style
that is best suited for your application.
Step 2 Where available, select an Eye style that is best suited for
your supporting application.
Step 3 Determine your cable outside diameter. Refer to Technical
Reference section.
Step 4 Find the mesh grip size that encompasses your cable diameter.
Step 5 Select a Mesh style from chart below. Whenever possible, use
a closed mesh that assembles over the cable end. If the cable
end is not available, use a split mesh such as Lace or Rod Closing.
Universal
Bale
Single
Step 6 IMPORTANT! Estimate the tension to be put on the grip, establish
the working load you require and compare this to the listed
approximate breaking strength of the grip to insure that the grip
will be strong enough. For Support Grips, use a Safety Factor of
10. Refer to Technical Reference section for safety and working
load considerations.
Offset
Eye Styles
Support Grip Styles
Standard Support Grips
Heavy Duty Grips
Service Drop
Bus Drop
Conduit Riser
3
Support Vertical Runs to 99 ft. Loads to 600lbs. Electrical cables must be supported or their dead weight
can cause excessive strain or pullout at the connections resulting in a power failure.
(Diameter Range = .5 to 3.99" and Breaking Strength Range = 500 to 4900 lbs.)
Support Vertical Runs over 100 ft. Loads Over 600lbs. Electrical cables must be supported or their dead
weight can cause excessive strain or pullout at the connections resulting in a power failure.
Light Duty to Support Service Entrance Cable in sloping, vertical, or horizontal positions.
Light Duty Support, Indoors Only, On Bus Drop Cable that relieves tension and absorbs vibration which
protects the cable. Safety Springs can be used in conjunction to relieve sudden strain on cord or cable
overhead systems.
Support Cable Runs in Rigid (Sched. 40) Conduit.
Eye Styles
Single
For use when cable is vertical and for applications where cable bends or for where a single attachment is more
advantageous for positioning.
Double
For use when cable is vertical and extends through the grip without bending. Eyes may be fastened to open hooks, but
should not be more than 15 degrees from the axis of the vertical cable. When the eyes are supported equally, this
attachment provides a fully balanced load.
Offset
Similar to single eye applications, but for use when offset positioning is required.
Universal Bale
Adjustable and self-locking, this attachment fits around a beam, pipe, or other continuous structural object. The bale
wraps around the object and is securely anchored in the bar.
Mesh Styles
Closed
Permanent support when cable end is available for support grip installation.
Split Lace Closing
Permanent support when cable end is not available for support grip installation.
Split Rod Closing
Temporary support when cable end is not available for support grip installation
Closed
Mesh Styles
Split Rod
Split Lace
4
Support Grips - Standard Duty - Double Eye
• Stranded tinned bronze wire.
DOUBLE EYE, CLOSED MESH
M
E
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
SG-CM-050-DE
SG-CM-062-DE
SG-CM-075-DE
SG-CM-100-DE
SG-CM-125-DE
SG-CM-150-DE
SG-CM-175-DE
SG-CM-200-DE
SG-CM-250-DE
SG-CM-300-DE
SG-CM-350-DE
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
530 LBS.
790 LBS.
1020 LBS.
1610 LBS.
1610 LBS.
1610 LBS.
2150 LBS.
3260 LBS.
3260 LBS.
4900 LBS.
4900 LBS.
4
4
4
5
5
5
6
6
6
8
8
10
10
13
14
15
17
19
21
23
25
27
DOUBLE EYE, LACE CLOSING
M
E
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
SG-LC-050-DE
SG-LC-062-DE
SG-LC-075-DE
SG-LC-100-DE
SG-LC-125-DE
SG-LC-150-DE
SG-LC-175-DE
SG-LC-200-DE
SG-LC-250-DE
SG-LC-300-DE
SG-LC-350-DE
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
530 LBS.
790 LBS.
1020 LBS.
1610 LBS.
1610 LBS.
1610 LBS.
2150 LBS.
3260 LBS.
3260 LBS.
4900 LBS.
4900 LBS.
PART
NUMBER
DIA. RA.
SG-RC-050-DE
SG-RC-062-DE
SG-RC-075-DE
SG-RC-100-DE
SG-RC-125-DE
SG-RC-150-DE
SG-RC-175-DE
SG-RC-200-DE
SG-RC-250-DE
SG-RC-300-DE
SG-RC-350-DE
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
DOUBLE EYE, ROD CLOSING
M
E
LENGTH
PART
NUMBER
APPROX.
BREAKING
STRENGTH
530LBS.
790LBS.
1020LBS.
1610LBS.
1610LBS.
1610LBS.
2150LBS.
3260LBS.
3260LBS.
4900LBS.
4900LBS.
LENGTH
E
M
4
4
4
5
5
5
6
6
6
8
8
10
10
13
14
15
17
19
21
23
25
27
LENGTH
E
M
4
4
4
5
5
5
6
6
6
8
8
10
10
13
14
15
17
19
21
23
25
27
E = Eye Length M = Mesh Length at Nominal Diameter (Inches)
Support Grip Number Structure
Product Type
SG =
-
Support Grips
SGHD = Support Grips
Heavy Duty
(Double Weave)
Mesh
CM = Closed Mesh
LC = Lace Closing
RC = Rod Closing
-
Mesh Diameter
Lower Diameter
Range of Mesh
-
Eye Style
DE = Double Eye
SE = Single Eye
OFS = Offset Eye
UB = Universal Bale
Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors.
5
Support Grips - Standard Duty - Single Eye
SINGLE EYE, CLOSED MESH
E
M
SINGLE EYE, LACE CLOSING
M
E
SINGLE EYE, ROD CLOSING
M
E
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
SG-CM-050-SE
SG-CM-062-SE
SG-CM-075-SE
SG-CM-100-SE
SG-CM-125-SE
SG-CM-150-SE
SG-CM-175-SE
SG-CM-200-SE
SG-CM-250-SE
SG-CM-300-SE
SG-CM-350-SE
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
530LBS.
790LBS.
1020LBS.
1610LBS.
1610LBS.
1610LBS.
2150LBS.
3260LBS.
3260LBS.
4900LBS.
4900LBS.
7
8
8
9
10
12
14
16
18
21
24
10
10
13
14
15
17
19
21
23
25
27
PART
NUMBER
DIA. RA.
SG-LC-050-SE
SG-LC-062-SE
SG-LC-075-SE
SG-LC-100-SE
SG-LC-125-SE
SG-LC-150-SE
SG-LC-175-SE
SG-LC-200-SE
SG-LC-250-SE
SG-LC-300-SE
SG-LC-350-SE
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
SG-RC-050-SE
SG-RC-062-SE
SG-RC-075-SE
SG-RC-100-SE
SG-RC-125-SE
SG-RC-150-SE
SG-RC-175-SE
SG-RC-200-SE
SG-RC-250-SE
SG-RC-300-SE
SG-RC-350-SE
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
530LBS.
790LBS.
1020LBS.
1610LBS.
1610LBS.
1610LBS.
2150LBS.
3260LBS.
3260LBS.
4900LBS.
4900LBS.
7
8
8
9
10
12
14
16
18
21
24
10
10
13
14
15
17
19
21
23
25
27
SG =
-
Support Grips
Heavy Duty
(Double Weave)
APPROX.
BREAKING
STRENGTH
530LBS.
790LBS.
1020LBS.
1610LBS.
1610LBS.
1610LBS.
2150LBS.
3260LBS.
3260LBS.
4900LBS.
4900 LBS.
LENGTH
E
M
7
8
8
9
10
12
14
16
18
21
24
10
10
13
14
15
17
19
21
23
25
27
LENGTH
Product Type
LENGTH
PART
NUMBER
Mesh
CM = Closed Mesh
LC = Lace Closing
RC = Rod Closing
-
Mesh Diameter
Lower Diameter
Range of Mesh
-
Eye Style
DE = Double Eye
SE = Single Eye
OFS = Offset Eye
UB = Universal Bale
6
Support Grips - Standard Duty - Offset Eye
OFFSET EYE, CLOSED MESH
M
E
OFFSET EYE, LACE CLOSING
M
E
OFFSET EYE, ROD CLOSING
M
E
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
SG-CM-050-OFS
SG-CM-062-OFS
SG-CM-075-OFS
SG-CM-100-OFS
SG-CM-125-OFS
SG-CM-150-OFS
SG-CM-175-OFS
SG-CM-200-OFS
SG-CM-250-OFS
SG-CM-300-OFS
SG-CM-350-OFS
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
500LBS.
750LBS.
950LBS.
1500LBS.
1500LBS.
1500LBS.
2000LBS.
3100LBS.
3100LBS.
3800LBS.
3800LBS.
APPROX.
BREAKING
STRENGTH
500LBS.
750LBS.
950LBS.
1500LBS.
1500LBS.
1500LBS.
2000LBS.
3100LBS.
3100LBS.
3800LBS.
3800LBS.
LENGTH
E
M
4
4
4
5
5
5
6
6
6
9
9
10
10
13
14
15
17
19
21
23
25
27
LENGTH
PART
NUMBER
DIA. RA.
SG-LC-050-OFS
SG-LC-062-OFS
SG-LC-075-OFS
SG-LC-100-OFS
SG-LC-125-OFS
SG-LC-150-OFS
SG-LC-175-OFS
SG-LC-200-OFS
SG-LC-250-OFS
SG-LC-300-OFS
SG-LC-350-OFS
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
SG-RC-050-OFS
SG-RC-062-OFS
SG-RC-075-OFS
SG-RC-100-OFS
SG-RC-125-OFS
SG-RC-150-OFS
SG-RC-175-OFS
SG-RC-200-OFS
SG-RC-250-OFS
SG-RC-300-OFS
SG-RC-350-OFS
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
500LBS.
750LBS.
950LBS.
1500LBS.
1500LBS.
1500LBS.
2000LBS.
3100LBS.
3100LBS.
3800LBS.
3800LBS.
4
4
4
5
5
5
6
6
6
9
9
10
10
13
14
15
17
19
21
23
25
27
E
M
4
4
4
5
5
5
6
6
6
9
9
10
10
13
14
15
17
19
21
23
25
27
LENGTH
Product Type
SG =
-
Support Grips
Heavy Duty
(Double Weave)
Mesh
CM = Closed Mesh
LC = Lace Closing
RC = Rod Closing
-
Mesh Diameter
Lower Diameter
Range of Mesh
-
Eye Style
DE = Double Eye
SE = Single Eye
OFS = Offset Eye
UB = Universal Bale
7
Support Grips - Standard Duty - Universal
UNIVERSAL BALE,
CLOSED MESH
M
E
UNIVERSAL BALE,
LACE CLOSING
M
E
UNIVERSAL BALE,
ROD CLOSING
M
E
E
M
.50-.62
APPROX.
BREAKING
STRENGTH
530LBS.
18
10
.63-.74
790LBS.
18
10
SG-CM-075-UB
.75-.99
1020LBS.
18
13
SG-CM-100-UB
1.00-1.24
1610LBS.
18
14
SG-CM-125-UB
1.25-1.49
1610LBS.
18
15
SG-CM-150-UB
1.50-1.74
1610LBS.
18
17
SG-CM-175-UB
1.75-1.99
2150LBS.
18
19
SG-CM-200-UB
2.00-2.49
3260LBS.
18
21
SG-CM-250-UB
2.50-2.99
3260LBS.
18
23
SG-CM-300-UB
3.00-3.49
4900LBS.
18
25
SG-CM-350-UB
3.50-3.99
4900LBS.
18
27
PART
NUMBER
DIA. RA.
SG-LC-050-UB
SG-LC-062-UB
PART
NUMBER
DIA. RA.
SG-CM-050-UB
SG-CM-062-UB
E
M
.50-.62
APPROX.
BREAKING
STRENGTH
530LBS.
18
10
.63-.74
790LBS.
18
10
SG-LC-075-UB
.75-.99
1020LBS.
18
13
SG-LC-100-UB
1.00-1.24
1610LBS.
18
14
SG-LC-125-UB
1.25-1.49
1610LBS.
18
15
SG-LC-150-UB
1.50-1.74
1610LBS.
18
17
SG-LC-175-UB
1.75-1.99
2150LBS.
18
19
SG-LC-200-UB
2.00-2.49
3260LBS.
18
21
SG-LC-250-UB
2.50-2.99
3260LBS.
18
23
SG-LC-300-UB
3.00-3.49
4900LBS.
18
25
SG-LC-350-UB
3.50-3.99
4900LBS.
18
27
PART
NUMBER
DIA. RA.
SG-RC-050-UB
SG-RC-062-UB
SG-RC-075-UB
SG-RC-100-UB
SG-RC-125-UB
SG-RC-150-UB
SG-RC-175-UB
SG-RC-200-UB
SG-RC-250-UB
SG-RC-300-UB
SG-RC-350-UB
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
Product Type
SG =
-
Support Grips
Heavy Duty
(Double Weave)
LENGTH
APPROX.
BREAKING
STRENGTH
530LBS.
790LBS.
1020LBS.
1610LBS.
1610LBS.
1610LBS.
2150LBS.
3260LBS.
3260LBS.
4900LBS.
4900LBS.
LENGTH
LENGTH
E
M
18
18
18
18
18
18
18
18
18
18
18
10
10
13
14
15
17
19
21
23
25
27
Mesh
CM = Closed Mesh
LC = Lace Closing
RC = Rod Closing
-
Mesh Diameter
Lower Diameter
Range of Mesh
-
Eye Style
DE = Double Eye
SE = Single Eye
OFS = Offset Eye
UB = Universal Bale
8
Support Grips - Heavy Duty
• Ericson Heavy Duty Support Grips are designed to withstand greater
loads and increased stress
SINGLE EYE, CLOSED MESH,
DOUBLE WEAVE
M
E
DOUBLE EYE, CLOSED MESH,
DOUBLE WEAVE
M
E
LENGTH
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
SGHD-CM-075-SE
.75-.99
2820LBS.
10
25
SGHD-CM-100-SE
1.00-1.24
4280LBS.
10
28
SGHD-CM-125-SE
1.25-1.49
4280LBS.
10
30
SGHD-CM-150-SE
1.50-1.99
4280LBS.
10
34
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
SGHD-CM-075-DE
.75-.99
2820LBS.
10
25
SGHD-CM-100-DE
1.00-1.24
4280LBS.
10
28
SGHD-CM-125-DE
1.25-1.49
4280LBS.
10
30
SGHD-CM-150-DE
1.50-1.99
4280LBS.
10
34
SGHD-CM-200-DE
2.00-2.49
8050LBS.
10
36
SGHD-CM-250-DE
2.50-2.99
8050LBS.
10
38
SGHD-CM-300-DE
3.00-3.49
10060LBS.
10
40
SGHD-CM-350-DE
3.50-3.99
12070LBS.
10
44
SGHD-CM-400-DE
4.00-4.49
12070LBS.
10
46
PART
NUMBER
LENGTH
Product Type
SG =
-
Support Grips
Heavy Duty
(Double Weave)
Mesh
CM = Closed Mesh
LC = Lace Closing
RC = Rod Closing
-
Mesh Diameter
Lower Diameter
Range of Mesh
-
Eye Style
DE = Double Eye
SE = Single Eye
OFS = Offset Eye
UB = Universal Bale
9
Support Grips - Light Duty Service Drops
• Ericson Service Drop Grips are used in a wide variety of light duty electrical applications such as service entrance,
cable tv, telephone, fiber optics, etc., in sloping, vertical, or horizontal positions.
• High grade non-magnetic tin coated bronze wire.
STANDARD, SINGLE EYE
M
E
E
SD-23-SE
SD-32-SE
SD-43-SE
SD-56-SE
SD-73-SE
SD-85-SE
SD-100-SE
.23-.31
.32-.43
.43-.56
.56-.73
.73-.85
.85-1.00
1.00-1.25
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
SD-23-UB
SD-32-UB
SD-43-UB
SD-56-UB
SD-73-UB
SD-85-UB
SD-100-UB
.23-.31
.32-.43
.43-.56
.56-.73
.73-.85
.85-1.00
1.00-1.25
290LBS.
290LBS.
380LBS.
600LBS.
790LBS.
1020LBS.
1020LBS.
8
10
12
13
14
14
15
3
4
5
6
6
8
9
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
SDHD-23-SE
SDHD-32-SE
SDHD-43-SE
SDHD-56-SE
SDHD-73-SE
SDHD-85-SE
SDHD-100-SE
.23-.31
.32-.43
.43-.56
.56-.73
.73-.85
.85-1.00
1.00-1.25
500LBS.
500LBS.
870LBS.
1050LBS.
1390LBS.
1790LBS.
1790LBS.
5
6
6
7
8
8
9
5
6
8
9
10
12
14
HEAVY DUTY, SINGLE EYE
M
E
HEAVY DUTY, UNIVERSAL BALE
M
E
Bus Drops & Service Drops Number Structure
Product Type
SD =
Service Drops
SDHD = Service Drops
Heavy Duty
(Double Weave)
-
Mesh Diameter
Lower Diameter
Range of Mesh
LENGTH
DIA. RA.
STANDARD, UNIVERSAL BALE
M
APPROX.
BREAKING
STRENGTH
290LBS.
290LBS.
380LBS.
600LBS.
790LBS.
1020LBS.
1020LBS.
PART
NUMBER
PART
NUMBER
DIA. RA.
SDHD-23-UB
SDHD-32-UB
SDHD-43-UB
SDHD-56-UB
SDHD-73-UB
SDHD-85-UB
SDHD-100-UB
.23-.31
.32-.43
.43-.56
.56-.73
.73-.85
.85-1.00
1.00-1.25
-
APPROX.
BREAKING
STRENGTH
500LBS.
500LBS.
870LBS.
1050LBS.
1390LBS.
1790LBS.
1790LBS.
E
M
4
4
6
7
7
8
9
3
4
5
6
6
8
9
LENGTH
LENGTH
LENGTH
E
M
9
10
12
13
14
14
15
5
6
8
9
10
12
14
Eye Style
SE = Single Eye
UB = Universal Bale
10
Support Grips - Conduit Riser Grips
• Ericson Conduit Riser Support Grips are used to support cable runs in vertical or sloping
standard rigid conduit.
• They are designed to prevent cable creep in conduit and help prevent cable pullouts.
• Ericson Conduit Riser Support Grips install quickly and easily with no damage to electrical cable.
• The mesh is attached to a support ring, which sits on the conduit requiring no extra hardware
to attach.
• Fittings, bushings, or couplings may be threaded on the conduit with the grip in place.
SINGLE WEAVE, CLOSED MESH
For permanent support when cable end is available to be installed through the grip.
CABLE SIZE
INCHES
.50-.62
.63-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
LENGTH
8”
9”
10”
11”
12”
13”
14”
17”
18”
20”
21”
CONDUIT
SIZE
APX. BRK.
STR. LBS.
530
290
790
435
1030
560
1610
890
1610
890
1610
890
2150
1180
3260
1795
3260
1795
4080
2245
4080
2245
3/4”
CAT. NO.
CRG-C.75-CM-050
1”
CAT. NO.
CRG-C1-CM-050
CRG-C1-CM-062
1-1/4”
CAT. NO.
CRG-C1.25-CM-050
CRG-C1.25-CM-062
CRG-C1.25-CM-075
1-1/2”
CAT. NO.
CRG-C1.50-CM-050
CRG-C1.50-CM-062
CRG-C1.50-CM-075
2”
CAT. NO.
CRG-C2-CM-050
CRG-C2-CM-062
CRG-C2-CM-075
CRG-C2-CM-100
2-1/2”
CAT. NO.
CRG-C2.50-CM-050
CRG-C2.50-CM-062
CRG-C2.50-CM-075
CRG-C2.50-CM-100 CRG-C2.50-CM-125
CRG-C2.50-CM-150
CRG-C2.50-CM-175
3”
CAT. NO.
CRG-C3-CM-050
CRG-C3-CM-062
CRG-C3-CM-075
CRG-C3-CM-100
CRG-C3-CM-150
CRG-C3-CM-175
CRG-C3-CM-200
3-1/2”
CAT. NO.
CRG-C3.50-CM-062
CRG-C3.50-CM-075
CRG-C3.50-CM-100 CRG-C3.50-CM-125
CRG-C3.50-CM-150
CRG-C3.50-CM-175
CRG-C3.50-CM-200 CRG-C3.50-CM-250
CRG-C2-CM-125
CRG-C4-CM-062
CRG-C3-CM-125
4”
CAT. NO.
CRG-C4-CM-075
CRG-C4-CM-100
CRG-C4-CM-150
CRG-C4-CM-175
CRG-C4-CM-200
4-1/2””
CAT. NO.
CRG-C4.50-CM-075
CRG-C4.50-CM-100 CRG-C4.50-CM-125
CRG-C4.50-CM-150
CRG-C4.50-CM-175
CRG-C4.50-CM-200 CRG-C4.50-CM-250
CRG-C4.50-CM-300 CRG-C4.50-CM-350
5”
CAT. NO.
CRG-C5-CM-075
CRG-C5-CM-100
CRG-C5-CM-125
CRG-C5-CM-150
CRG-C5-CM-175
CRG-C5-CM-200
CRG-C5-CM-250
CRG-C5-CM-300
CRG-C5-CM-350
6”
CAT. NO.
CRG-C6-CM-075
CRG-C6-CM-100
CRG-C6-CM-125
CRG-C6-CM-150
CRG-C6-CM-175
CRG-C6-CM-200
CRG-C6-CM-250
CRG-C6-CM-300
CRG-C6-CM-350
Conduit Riser Grips Number Structure
Product Type
CRG = Conduit Riser Grips
11
CRG-C1.50-CM-100
-
Conduit Size
0.75" thru 6"
-
CRG-C4-CM-125
Mesh Style
CM = Closed Mesh
LC = Lace Closing
RC = Rod Closing
-
Mesh Diameter
Lower Diameter
Range of Mesh
CRG-C4-CM-250
CRG-C4-CM-300
DOUBLE WEAVE, SPLIT MESH, LACE CLOSING
For permanent support when cable end is not available.
CABLE SIZE
INCHES
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
LENGTH
10”
11”
12”
13”
14”
17”
18”
20”
21”
CONDUIT
SIZE
APX. BRK.
STR. LBS.
1580
870
2040
1125
2040
1125
2040
1125
2730
1500
4300
2365
4300
2365
5380
2955
5380
2955
1-1/4”
CAT. NO.
CRG-C1.25-LC-075
1-1/2”
CAT. NO.
CRG-C1.5-LC-075 CRG-C1.5-LC-100
2”
CAT. NO.
CRG-C2-LC-075
2-1/2”
CAT. NO.
CRG-C2.5-LC-075 CRG-C2.5-LC-100CRG-C2.5-LC-125CRG-C2.5-LC-150CRG-C2.5-LC-175
3”
CAT. NO.
CRG-C3-LC-075
3-1/2”
CAT. NO.
CRG-C3.5-LC-075 CRG-C3.5-LC-100CRG-C3.5-LC-125 CRG-C3.5-LC-150CRG-C3.5-LC-175CRG-C3.5-LC-200CRG-C3.5-LC-250
4”
CAT. NO.
CRG-C4-LC-075
4-1/2”
CAT. NO.
CRG-C4.5-LC-075 CRG-C4.5-LC-100CRG-C4.5-LC-125CRG-C4.5-LC-150CRG-C4.5-LC-175CRG-C4.5-LC-200CRG-C4.5-LC-250CRG-C4.5-LC-300CRG-C4.5-LC-350
5”
CAT. NO.
CRG-C5-LC-075
CRG-C5-LC-100 CRG-C5-LC-125 CRG-C5-LC-150 CRG-C5-LC-175 CRG-C5-LC-200 CRG-C5-LC-250 CRG-C5-LC-300 CRG-C5-LC-350
6”
CAT. NO.
CRG-C6-LC-075
CRG-C6-LC-100 CRG-C6-LC-125 CRG-C6-LC-150 CRG-C6-LC-175 CRG-C6-LC-200 CRG-C6-LC-250 CRG-C6-LC-300 CRG-C6-LC-350
CRG-C2-LC-100 CRG-C2-LC-125
CRG-C3-LC-100 CRG-C3-LC-125 CRG-C3-LC-150 CRG-C3-LC-175 CRG-C3-LC-200
CRG-C4-LC-100 CRG-C4-LC-125 CRG-C4-LC-150 CRG-C4-LC-175 CRG-C4-LC-200 CRG-C4-LC-250 CRG-C4-LC-300
Product Type
-
Conduit Size
0.75" thru 6"
-
Mesh Style
CM = Closed Mesh
LC = Lace Closing
RC = Rod Closing
-
Mesh Diameter
Lower Diameter
Range of Mesh
12
SINGLE WEAVE, SPLIT MESH, ROD CLOSING
For temporary support when cable end is not available.
CABLE SIZE
INCHES
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
3.50-3.99
LENGTH
11”
12”
13”
14”
15”
16”
17”
19”
20
CONDUIT
SIZE
APX. BRK.
STR. LBS.
1020
560
1610
890
1610
890
1610
890
2150
1180
3260
1795
3260
1795
4080
2245
4080
2245
1-1/4”
CAT. NO.
CRG-C1.25-RC-075
1-1/2”
CAT. NO.
CRG-C1.5-RC-075 CRG-C1.5-RC-100
2”
CAT. NO.
CRG-C2-RC-075
2-1/2”
CAT. NO.
CRG-C2.5-RC-075 CRG-C2.5-RC-100 CRG-C2.5-RC-125 CRG-C2.5-RC-150 CRG-C2.5-RC-175
3”
CAT. NO.
CRG-C3-RC-075
3-1/2”
CAT. NO.
CRG-C3.5-RC-075 CRG-C3.5-RC-100 CRG-C3.5-RC-125 CRG-C3.5-RC-150 CRG-C3.5-RC-175 CRG-C3.5-RC-200 CRG-C3.5-RC-250
4”
CAT. NO.
CRG-C4-RC-075
4-1/2”
CAT. NO.
CRG-C4.5-RC-075 CRG-C4.5-RC-100 CRG-C4.5-RC-125 CRG-C4.5-RC-150 CRG-C4.5-RC-175 CRG-C4.5-RC-200 CRG-C4.5-RC-250 CRG-C4.5-RC-300 CRG-C4.5-RC-350
5”
CAT. NO.
CRG-C5-RC-075
CRG-C5-RC-100 CRG-C5-RC-125 CRG-C5-RC-150 CRG-C5-RC-175 CRG-C5-RC-200 CRG-C5-RC-250 CRG-C5-RC-300 CRG-C5-RC-350
6”
CAT. NO.
CRG-C6-RC-075
CRG-C6-RC-100 CRG-C6-RC-125 CRG-C6-RC-150 CRG-C6-RC-175 CRG-C6-RC-200 CRG-C6-RC-250 CRG-C6-RC-300 CRG-C6-RC-350
CRG-C2-RC-100 CRG-C2-RC-125
CRG-C3-RC-100 CRG-C3-RC-125 CRG-C3-RC-150 CRG-C3-RC-175 CRG-C3-RC-200
CRG-C4-RC-100 CRG-C4-RC-125 CRG-C4-RC-150 CRG-C4-RC-175 CRG-C4-RC-200 CRG-C4-RC-250 CRG-C4-RC-300
Product Type
13
-
Conduit Size
0.75" thru 6"
-
Mesh Style
CM = Closed Mesh
LC = Lace Closing
RC = Rod Closing
-
Mesh Diameter
Lower Diameter
Range of Mesh
Conduit Riser
Conduit Rings
Select Conduit Ring Dimension from chart to the right.
Conduit Rings are cast bronze, zinc plated to resist corrosion.
Conduit Ring Dimensions
CONDUIT
SIZE
RING NO.
O.D.
I.D.
S
T
3/4”
1”
1-1/4”
C-3/4”
C-1
C-1-1/4
.94
1.31
1.50
.62
.93
1.03
1.31
.19
.19
.16
1-1/2”
2”
2-1/2”
C-1-1/2
C-2
C-2-1/2
1.76
2.23
2.67
1.23
1.55
2.05
1.52
1.97
2.40
.16
.16
.16
3”
3-1/2”
4”
C-3
C-3-1/2
C-4
3.20
3.80
4.30
2.55
3.05
3.55
2.97
3.47
3.94
.22
.22
.22
4-1/2”
5”
6”
C-4-1/2
C-5
C-6
4.80
5.30
6.30
4.03
4.46
5.36
4.45
4.96
5.96
.22
.22
.25
For Ericson Conduit Riser Grips only
use to determine grip size when multiple cables are held
in a Single Conduit Riser Grip
For
Cables
Of
Equal
Diameters
• Under "Number of cables in one grip," find diameter of your cable in vertical column.
• Read grip size and grip diameter range to the right.
• If your diameter is the maximum of the range shown, go to
the next larger size for split grips, stay with the same size for closed grips.
• Example: 3 cables, each with .85 diameter, for a closed grip
select the 1.50 - 1.74 range, for a split grip use 1.75 - 1.99.
NUMBER OF EQUAL DIAMETER CABLES IN ONE GRIP
2
3
4
5
6 and7
8
9
GRIP
DIAM.
RANGE
.29-.36
.24-.30
.21-.25
.18-.22
.16-.20
.15-.18
.14-.17
.50-.62
.37-.43
.31-.36
.26-.30
.23-.27
.21-.24
.19-.22
.18-.20
.63-.74
.44-.58
.37-.48
.31-.41
.28-.36
.25-.32
.23-.29
.21-.27
.75-.99
.59-.72
.49-.60
.42-.51
.37-.45
.33-.40
.30-.36
.28-.34
1.00-1.24
.73-.87
.61-.72
.52-.61
.46-.54
.41-.48
.37-.43
.35-.40
1.25-1.49
.88-1.01
.73-.85
.62-.71
.55-.63
.49-.56
.44-.51
.41-.47
1.50-1.74
1.02-1.16
.86-.96
.72-.81
.64-.72
.57-.64
.52-.58
.48-.54
1.75-1.99
1.17-1.44
.97-1.20
.82-1.02
.73-.90
.65-.80
.59-.72
.55-.67
2.00-2.49
1.45-1.73
1.21-1.45
1.03-1.22
.91-1.08
.81-.96
.73-.87
.68-.81
2.50-2.99
1.74-2.02
1.46-1.69
1.23-1.43
1.09-1.26
.97-1.11
.83-1.01
.82-.94
3.00-3.49
2.03-2.31
1.70-1.93
1.44-1.63
1.27-1.44
1.12-1.27
1.02-1.15
.95-1.08
3.50-3.9
14
Support Grips - Bus Drop Grips
• High strength galvanized steel strand.
• Ericson Bus Drop Grips are easily installed and absorb tension, vibration, and pull with no damage.
• They support flexible cord or Bus Drop Cable at bus duct or industrial areas.
• Single eye can be used with springs by disassembling draw bar from coil, placing through eye and replacing
draw bar.
• Hook eyes available, please consult factory.
SINGLE EYE, WIDE RANGE
LENGTH
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
E*
M
*BD-022-SE
*BD-030-SE
*BD-041-SE
*BD-053-SE
*BD-070-SE
*BD-082-SE
*BD-096-SE
BD-125-SE
.22-.32
.30-.43
.41-.56
.53-.73
.70-.85
.82-1.00
.96-1.25
1.25-1.50
350LBS.
450LBS.
550LBS.
1000LBS.
1400LBS.
1400LBS.
1500LBS.
1800LBS.
3
4
6
7
7
8
9
10
3-1/2**
4
4-3/4
6
6-3/4
8
9-1/2
12-1/2**
DRY LOCATION ONLY
*Except Where Noted
UNIVERSAL BALE, WIDE RANGE
LENGTH
PART
NUMBER
DIA. RA.
APPROX.
BREAKING
STRENGTH
E*
M
BD-022-UB
*BD-030-UB
*BD-041-UB
*BD-053-UB
*BD-070-UB
*BD-082-UB
*BD-096-UB
.22-.32
.30-.43
.41-.56
.53-.73
.70-.85
.82-1.00
.96-1.25
350LBS.
450LBS.
550LBS.
1000LBS.
1400LBS.
1400LBS.
1500LBS.
9
10
12
13
13
14
15
3-1/2**
4
4-3/4
6
6-3/4
8
9-1/2
DRY LOCATION ONLY
BUS DROP SAFETY SPRINGS
PART
NUMBER
MAXIMUM
DEFLECTION
APPROX.
BREAKING
STRENGTH
40LB SPRING
80LB SPRING
2-1/8 @40 LBS.
3-1/8 @80 LBS.
SPRING
SPRING
LENGTH
(NO LOAD)
L
600 LBS.
850 LBS.
D
8-1/4
8-1/4
Bus Drops & Service Drops Number Structure
Product Type
BD =
Bus Drops
SD =
Service Drops
SDHD = Service Drops
Heavy Duty
(Double Weave)
-
Mesh Diameter
Lower Diameter
Range of Mesh
-
Eye Style
* Dim with Bale Fully Extended
** Not UL Listed
SE = Single Eye
UB = Universal Bale
15
Notes
16
Pullling Grips - Light Duty and Utility Grips
Flag label shows catalog number, full description
containing diameter range, barcode, mfg date, and
MADE IN USA!
Flexible eyes will mate easily with line stringing swivels and links for attachment
to pulling lines. They have great strength for trouble free pulling jobs.
When using a Pulling Grip, these shoulder protectors contain the cable inside of
the grip and allow for a smooth passage of the grip through conduit bends.
All Ericson Pulling Grips utilize galvanized steel mesh strand that provides
superior pulling grip strength and flexibility to follow the cable path of the installation.
Double weave construction is available for added strength with greater mesh
contact on the cable to handler longer or heavier pulling requirements.
Closed Mesh weave allows for easy installation onto cable and is designed to be a
reusable tool.
17
Pulling Grips - Light Duty / Low Tension and Utility Grips
How To Select The Correct Pulling Grip
Choose a pulling grip style that is best suited for your application.
Step 1
Junior Pulling Grips cable diameter range =
.25 to 1.25" and Breaking Strength = 450 to 3900 lbs.
Light Duty Grips cable diameter range =
.50 to 3.99" and Breaking Strength = 2800 to 14700 lbs.
Utility Pulling Grips cable diameter range =
.50 to 6.99" and Breaking Strength range = 4500 to 48000 lbs.
Step 2
Determine your cable outside diameter. Refer to Technical Reference section.
Step 3
Find the mesh grip size that encompasses your cable diameter.
Step 4
IMPORTANT! Estimate the tension to be put on the grip, establish the working load you
require and compare this to the listed approximate breaking strength of the grip to insure
that the grip will be strong enough. For Pulling Grips, use a Safety Factor of 5.
Refer to Refer to Technical Reference section for safety
and working load considerations.
18
Pulling Grips - Light Duty/Low Tension
• High grade galvanized steel strand.
• They are single weave with a flexible eye for easy attachment to a pulling line.
• Ericson Light Duty Pulling Grips are used in general underground electrical construction where pulling
tensions are low.
SHORT
M
E
STANDARD
M
E
JUNIOR PULLING
For attaching to a pulling line,
fish tape or snake.
M
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
LDPG-050-S
LDPG-062-S
LDPG-075-S
LDPG-100-S
LDPG-125-S
LDPG-150-S
LDPG-175-S
LDPG-200-S
LDPG-250-S
LDPG-300-S
.50-.61
.62-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.74
1.75-1.99
2.00-2.49
2.50-2.99
3.00-3.49
2800LBS.
2800LBS.
4000LBS.
5300LBS.
5300LBS.
6800LBS.
8500LBS.
8500LBS.
10600LBS.
14700LBS.
5
5
6
7
7
8
8
9
9
10
11
11
12
13
14
15
17
18
18
20
PART
NUMBER
DIA. RA.
LDPG-050
LDPG-062
LDPG-075
LDPG-100
LDPG-125
LDPG-150
LDPG-200
LDPG-250
LDPG-300
LDPG-350
.50-.61
.62-.74
.75-.99
1.00-1.24
1.25-1.49
1.50-1.99
2.00-2.49
2.50-2.99
3.00-3.50
3.50-3.99
PART
NUMBER
DIA. RA.
JPG-25
JPG-37
JPG-50
JPG-62
JPG-75
JPG-100
JPG-KIT
INCLUDES:
E
LENGTH
PART
NUMBER
.25-.36
.37-.49
.50-.61
.62-.74
.75-.99
1.00-1.25
.25-1.25
JPG-25, JPG-37
JPG-50, JPG-62
JPG-75, JPG-100
APPROX.
BREAKING
STRENGTH
2800LBS.
2800LBS.
4000LBS.
6800LBS.
6800LBS.
6800LBS.
8500LBS.
10600LBS.
14700LBS.
14700LBS.
LENGTH
E
M
5
5
6
7
7
8
9
9
10
10
16
16
20
20
21
23
25
27
30
32
LENGTH
APPROX.
BREAKING
STRENGTH
E
M
450 LBS.
900 LBS.
1300 LBS.
1950 LBS.
2800 LBS.
3900 LBS.
3-1/4
3-1/4
4-1/4
5
5-3/4
6-1/2
4-1/4
7
8-1/2
10
10
11-1/2
Pulling Grips Number Structure
Product Type
LDPG = Light Duty Pulling Grips
JPG = Junior Pulling Grips
UPG = Utility Pulling Grips
-
Mesh Diameter
Lower Diameter
Range of Mesh
-
Eye Style
FE = Flexible Eye
S = Short
19
Pulling Grips - Utility Pulling Grips
• High strength galvanized steel strand.
• Pulling Grips are double weave for added strength with greater mesh contact on the cable to handle longer
or heavier pulling jobs.
Standard, Flexible Eye
LENGTH
DIA. RA.
APPROX.
BREAKING
STRENGTH
E
M
UPG-50-FE
.50-.61
4500LBS.
5
16
UPG-62-FE
.62-.74
5600LBS.
5
16
UPG-75-FE
.75-.99
6800LBS.
6
32
UPG-100-FE
1.00-1.49
9600LBS.
7
33
UPG-150-FE
1.50-1.99
16400LBS.
7
34
UPG-200-FE
2.00-2.49
18500LBS.
9
36
UPG-250-FE
2.50-2.99
24500LBS.
10
38
UPG-300-FE
3.00-3.49
24500LBS.
10
39
UPG-350-FE
3.50-3.99
31000LBS.
10
41
PART
NUMBER
For shorter or longer mesh please consult factory.
Pulling Grips Number Structure
Product Type
LDPG = Light Duty Pulling Grips
JPG = Junior Pulling Grips
UPG = Utility Pulling Grips
-
Mesh Diameter
Lower Diameter
Range of Mesh
-
Eye Style
FE = Flexible Eye
S = Short
20
Notes
21
Strain Relief Grips - Wide Range Grips, Cord Grips, Deluxe Cord Grips, I-Grips
Wide Range
Grips
Cord
Grips
Deluxe Cord
Grips
I - Grips
Ericson's Strain Relief Grip and Mesh eliminates cable pullout to reduce a loss of service resulting in costly
downtime. The endless mesh weave provides easy cable installation that is woven with stainless steel providing
corrosion resistance for all applications. A NPT and PG threaded body allows for easy attachment to either a
threaded hub or knock-out in box.
22
How to select a Strain Relief Grip
Step 1 Refer to chart below to determine which Strain Relief Grip style is
best suited for your application.
Step 2 Determine outside diameter of cable.
Step 3 Is the application environment indoors or outdoors?
Step 4 Select N.P.T. size and fitting style.
Strain Relief Grip Style
Wide Range Grip
Deluxe Cord Grip
Cord Grips
I - Grips
23
Application
Features
Indoor use only for wiring of electrical enclosures,
portable power tools, bus drop cable systems, etc
Aluminum Body
Stainless Steel Mesh
Grip Range = .25 to 2.45"
Outdoors or indoors rated where item are
subjected to moisture or splash.
Examples are hand tools, pendant
drops for cranes and hoists, or
pumps and processing equipment.
Aluminum Nut
Aluminum Body
Neoprene Bushing
Stainless Steel Mesh with
Aluminum Collars
Outdoors or indoors rated where items are
subjected to moisture or splash
Aluminum Nut
Aluminum Body
Neoprene Bushing
Provides additional strain relief for Plugs and
Connectors while
controlling the cable arc of bend.
For indoor use only.
High Strength
Galvanized Strand
Strain Relief Grips - Wide Range
• Ericson Strain Relief Grips are wide range mesh construction with single weave, galvanized steel mesh.
• The one piece design is easy to install.
• Ericson Strain Relief Grips are used to connect flexible cord or bus drop cable to electrical enclosures, also
prevents cord or cable pullout.
• Insulating bushing available for non-insulated aluminum fittings.
• Available with locknut and pvc gasket for a dirt and dust free seal.
• Dry locations only.
SR SERIES Non-Insulated Wide Range Strain Relief
PART
NUMBER
DIA. RA.
THREAD SIZE NPT (INCHES)
LENGTH
@ NOM
DIA. (IN.)
SR-022
.24-.32
1/2
3-1/4
SR-030
.32-.43
1/2
3-3/4
SR-040
.43-.54
1/2
4-3/4
SR-052
.54-.73
3/4
6-1/2
SR-070
.73-.97
1
7
SR-094
.97-1.25
1-1/4
9
DRY LOCATION ONLY
SRP SERIES Insulated Wide Range Strain Relief with Insulating Bushing
Strain Relief Number Structure
Product Type
SR = Strain Relief
SRI = Strain Relief Insulated
-
PART
NUMBER
DIA. RA.
THREAD SIZE NPT
(INCHES)
LENGTH
@ NOM
DIA. (IN.)
DIM. A
(INCHES)
SRI-022
.24-.32
1/2 N.P.S.
3-1/4
1
SRI-030
.32-.43
1/2 N.P.S.
3-3/4
1
SRI-040
.43-.54
1/2 N.P.S.
4-3/4
1
SRI-052
.54-.73
3/4 N.P.S.
6-1/2
1
SRI-070
.73-.97
1 N.P.S.
7
1-3/16
SRI-094
.97-1.25
1-1/4 N.P.S.
9
1-3/16
SRI-120
1.25-1.50
1-1/2 N.P.T.
11-3/4
1-3/16
SRI-140
1.50-1.70
2 N.P.T.
13-1/4
1-3/8
SRI-162
1.70-2.00
2-1/2 N.P.T.
13-1/2
1-1/2
SRI-200
2.00-2.45
2-1/2 N.P.T.
13-3/4
1-1/2
DRY LOCATION ONLY
Mesh Diameter
Lower Diameter
Range of Mesh
24
Strain Relief Grips - Cord and Deluxe Cord Grips Features
Cord Grip
DeluxeCord Grip
Features
• Indoor and outdoor use
• Prevents cord pull-out
• For use where cable is exposed to
moisture or submersion
• Eliminates fatigue points
• Control cable arc-of-bend
Cord Grip Materials
• Aluminum Nut
• Aluminum Body
• Neoprene Bushing
Deluxe Cord Grip Materials
• Aluminum Nut
• Aluminum Body
• Neoprene Bushing
• SST Mesh with aluminum collars
25
Applications
• Wiring Enclosures
• Pumps
• Compressors
• Construction
• Hand Tools
• Processing Equipment
• Material Handling Equipment
• Motors & Machine Tools
COMPLIANCES:
National Electrical Code
Articles 400-10 and 400-14
NEMA standars FB1-1983
Fed. Spec. W-C-586c
Mil Spec 100 and 130
Available upon request
• Metal Clad Sealing “O” Ring
• Locknut
Suitable for use in hazardous
locations under NEC Sec
501-4(b), 502-4(a)(2), and
503-2(a). For Class 1, Div 2;
Class II, Div 1 and 2;
and Class III, Div 1 and 2.
Strain Relief Grips - Cord Grips
MACHINED ALUMINUM
NPT
HUB SIZE
STRAIGHT CORD CONNECTORS
Machined Aluminum
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
DIAMETER RANGE
INCHES
.062-.125
.125-.187
.187-.250
.250-.312
FORM SIZE
CATALOG NUMBER
CG-12-F1-3/8
CG-18-F1-3/8
F1
CG-25-F1-3/8
CG-3I-F1-3/8
.312 · .375
CG-37-F1-3/8
.375-.437
CG-43-F1-3 8
062-.125
CG-12-F2
.125-.187
CG-18-F2
.187-.250
.250-.375
F2
CG-25-F2
CG-37-F2
.312-.437
CG-43-F2
.375-.500
CG-5C-F2
.375-.500
CG-50-F3
.500-.625
.625-150
F3
CG-62-F3
CG-75-F3
150-.875
CG-87-F3
.375-.500
CG-50-F4
.500-.625
CG-62-F4
.625-.750
.750-.875
F4
CG-75-F4
CG-87-F4
.875-1.00
CG-100-F4
1.00- 1.12
CG-112-F4
.750-.875
CG-87-F5
.875-1.00
CG-100-F5
1.00-1.125 F5
1.125-1.250
F5
CG-112-F5
CG-125-F5
1.250-1.375
CG-137-F5
1.375-1.437
CG-143-F5
.750-.875
CG-87-F6
.875-1.00
CG-100-F6
1.00-1.125
1.125-1.25
F6
CG-112-F6
CG-125-F6
1.25-1.375
CG-137-F6
1.375-1.437
CG -143-F6
26
STRAIGHT CORD CONNECTORS
CASTINGS
Cast Aluminum
ALUMINUM 2” -3” NPT
NPT
HUB SIZE
2”
2 1/2”
3”
27
DIAMETER RANGE
INCHES
.250-1.375
1.375-1.500
1.500-1.625
1.625-1750
1.750-1.875
1.875-1.937
1.937-2.000
1.688-1.812
1.812-1.937
1.937-2.062
2062-2188
2.188-2.312
2.312-2.437
2.437-2.625
2.625-2.812
2.812-3.000
3.000-3.250
FORM SIZE
F7
F8
F9
CATALOG NUMBER
CG-137-F7
CG-150-F7
CG-162-F7
CG-175-F7
CG-187-F7
CG-197-F7
CG-200-F7
CG-181-F8
CG-193-F8
CG-206-F8
CG-218-F8
CG-231-F8
CG-243-F8
CG-262-F9
CG-281-F9
CG-300-F9
CG3-325-F9
90˚ MALE CORD CONNECTORS
MACHINED ALUMINUM
NPT
HUB SIZE
DIAMETER RANGE
INCHES
NCG-12-F1
.125-.187
NCG-18-F1
.250-.312
F1
NCG-37-F1
NCG-43-F1
.062-.125
NCG-12-F2
.125-.187
NCG-18-F2
NCG-25-F2
F2
NCG-43F-2
.375-.500
NCG-50-F2*
.500-.625
NCG-62-F2*
.375-.500
NCG-50-F3
.625-.750
F3
.750-.875
.375-.500
.500-.625
.625-.750
.750-.875
1 1/4”
1 1/2”
NCG-62-F3
NCG-75-F3*
NCG-87-F3*
NCG-50-F4
NCG-62-F4
F4
NCG-75-F4
NCG-87-F4
.875-1.000
NCG-100-F4*
1.00-1.125
NCG-112-F4*
.750-.875
NCG-87-F5
.875-1.000
NCG-100-F5
1000-1.125
1.125-1.250
F5
NCG-112-F5
NCG-125-F5*
1.250-1.375
NCG-137-F5*
1.375-1.437
NCG-143-F5*
.750-.875
NCG-87-F6
.875-1.000
NCG-100-F6
1.000-1.125
1.125-1.250
F6
NCG-112-F6
NCG-125-F6
1.250-1.375
NCG-137-F6
1.375-1.437
NCG-143-F6
1.250-1.375
NCG-137-F7
1.375-1.500
NCG-150-F7
1.500-1.625
2”
NCG-37-F2
.312-.437
.500-.625
1”
NCG-31-F1
.375-.437
.250-.375
3/4”
NCG-25-F1
.312-.375
.187-.250
1/2”
CATALOG NUMBER
.062-.125
.187-.250
3/8”
FORM SIZE
1.625-1150
NCG-162-F7
F7
1.750-1.875
NCG-175-F7
NCG-187-F7
1.875-1937
NCG-193-F7
1.937-2.000
NCG-200-F7*
*Cable jacket may have to be stripped to pass through connector.
28
Strain Relief Grips - Deluxe Cord Grips
• Ericson Deluxe Cord Grips are used whenever cable or cord must withstand extreme applications and
environmental conditions.
• Widely used with switch boxes, power duct cut-outs, drop stations, power hand tools, moving parts of
machinery, pumps, compressors, and bus drop installations.
• Endless weave provides smooth cable-hugging ends for construction free installation.
THREAD
SIZE
N.P.T.
3/8”
1/2”
3/4”
1”
1-1/4”
29
GRIP DIAM.
RANGE INCHES
MALE
THREAD
DESCRIPTION
90˚ MALE THREAD
DESCRIPTION
45˚ MALE THREAD
DESCRIPTION
FEMALE
THREAD
DESCRIPTION
.18-.25
DCG-25-F1
DCG-25-F1-90
DCG-25-F1-45
DCG-25-F1-F
.25-.37
DCG-37-F1
DCG-37-F1-90
DCG-37-F1-45
DCG-37-F1-F
.37-.43
DCG-43-F1
DCG-43-F1-90
DCG-43-F1-45
DCG-43-F1-F
.18-.25
DCG-25-F2
DCG-25-F2-90
DCG-25-F2-45
DCG-25-F2-F
.25-.37
DCG-37-F2
DCG-37-F2-90
DCG-37-F2-45
DCG-37-F2-F
.31-.43
DCG-43-F2
DCG-43-F2-90
DCG-43-F2-45
DCG-43-F2-F
.37-.50
DCG-50-F2
DCG-50-F2-90
DCG-50-F2-45
DCG-50-F2-F
.50-.62
DCG-62-F2
DCG-62-F2-90
DCG-62-F2-45
DCG-62-F2-F
.18-.25
DCG-25-F3
DCG-25-F3-90
DCG-25-F2-45
DCG-25-F3-F
.25-.37
DCG-37-F3
DCG-37-F3-90
DCG-37-F2-45
DCG-37-F3-F
.37-.50
DCG-50-F3
DCG-50-F3-90
DCG-50-F2-45
DCG-50-F3-F
.50-.62
DCG-62-F3
DCG-62-F3-90
DCG-62-F2-45
DCG-62-F3-F
.62-.75
DCG-75-F3
DCG-75-F3-90
DCG-75-F2-45
DCG-75-F3-F
.37-.50
DCG-50-F4
DCG-50-F4-90
DCG-50-F2-45
DCG-50-F4-F
.50-.62
DCG-62-F4
DCG-62-F4-90
DCG-62-F2-45
DCG-62-F4-F
.62-.75
DCG-75-F4
DCG-75-F4-90
DCG-75-F2-45
DCG-75-F4-F
.75-.87
DCG-87-F4
DCG-87-F4-90
DCG-87-F4-45
DCG-87-F4-F
.87-1.00
DCG-100-F4
DCG-100-F4-90
DCG-100-F4-45
DCG-100-F4-F
.75-.87
DCG-87-F5
DCG-87-F5-90
DCG-87-F5-45
DCG-87-F5-F
.87-1.00
DCG-100-F5
DCG-100-F5-90
DCG-100-F5-45
DCG-100-F5-F
1.00-1.125
DCG-112-F5
DCG-112-F5-90
DCG-112-F5-45
DCG-112-F5-F
1.12-1.25
DCG-125-F5
DCG-125-F5-90
DCG-125-F5-45
DCG-125-F5-F
1.25-1.37
DCG-137-F5
DCG-137-F5-90
DCG-137-F5-90
DCG-137-F5-F
Strain Relief Grips - Deluxe Cord Grips
THREAD
SIZE
N.P.T.
1 1/2”
2”
2 1/2”
3”
GRIP DIAM. RANGE
INCHES
MALE
THREAD
DESCRIPTION
90˚ MALE THREAD
DESCRIPTION
45˚ MALE THREAD
DESCRIPTION
FEMALE
THREAD
DESCRIPTION
.75-.87
DCG-87-F6
DCG-87-F6-90
DCG-87-F6-45
DCG-87-F6-F
.87-1.00
DCG-100-F6
DCG-100-F6-90
DCG-100-F6-45
DCG-100-F6-F
1.00-1.125
DCG-112-F6
DCG-112-F6-90
DCG-112-F6-45
DCG-112-F6-F
1.125-1.25
DCG-125-F6
DCG-125-F6-90
DCG-125-F6-45
DCG-125-F6-F
1.20-1.375
DCG-137-F7
DCG-137-F7-90
1.375-1.500
DCG-150-F7
DCG-150-F7-90
1.500-1.625
DCG-162-F7
DCG-162-F7-90
1.625-1.750
DCG-175-F7
DCG-175-F7-90
1.750-1.875
DCG-187-F7
DCG-187-F7-90
1.875-1.937
DCG-193-F7
DCG-193-F7-90
1.937-2.000
DCG-200-F7
DCG-200-F7-90
1.687-1.812
DCG-181-F8
1.812-1.937
DCG-193-F8
1.937-2.062
DCG-206-F8
2.062-2.187
DCG-218-F8
2.187-2.312
DCG-231-F8
2.312-2.437
DCG-243-F8
2.437-2.625
DCG-262-F9
2.625-2.812
DCG-281-F9
2.812-3.000
DCG-300-F9
3.000-3.250
DCG-325-F9
30
Strain Relief Grips - I-Grips
• Ericson - Grips are easy to attach, will control cable-arc-of bend, and provide heavy duty strain relief for plugs
and connectors used on portable equipment where abnormal high strain abuse occurs.
• Ericson- Grips are made of high strength galvanized steel strand and are recommended for indoor use only.
I - GRIPS GALVANIZED
M
E
PART
NUMBER
CABLE DIAMETER
RANGE INCHES
E
M
I-030
I-040
I-052
I-070
I-082
I-094
.30-.43
.40-.56
.52-.73
.70-.85
.82-1.00
.94-1.25
1.25
1.25
1.50
1.50
1.50
1.50
4
4-3/4
6
6-1/2
8
10
PART
NUMBER
CABLE DIAMETER
RANGE INCHES
E
M
I-030-NC
I-040-NC
I-052-NC
I-070-NC
I-082-NC
I-094-NC
.30-.43
.40-.56
.52-.73
.70-.85
.82-1.00
.94-1.25
1.25
1.25
1.50
1.50
1.50
1.50
4
4-3/4
6
6-1/2
8
10
I - GRIPS NYLON COATED
M
E
31
Notes
32
Technical Reference - Working Load and Safety Factor Considerations
The Grips in the catalog have listed approximate Breaking Strength. The approximate breaking
strength of an Ericson grip represents an average calculation based on test factors, which have been
determined from data established from actual testing performed in our engineering laboratories.
The actual testing is performed with new Grips on metal rods, subject to straight longitudinal tensile
loads applied at a uniform rate. Normal manufacturing and test factors can produce a variation + or
- 20% in the approximate breaking strength values listed.
The broad application of Ericson Grips on a wide variety of objects require that adequate safety factors
be used to establish a safe working load. The ratio of the listed approximate breaking strength to the
normal working load is the safety factor. As an example, a safety factor of ten (10) would then mean
the working load is established by dividing the catalog listed approximate breaking strength by ten
(10), or it can be stated that the working load is 1/10 of the catalog listed approximate breaking
strength.
To determine the recommended working load safety factor for cable grips, divide the approximate
breaking strength by 5 for Pulling Grips and 10 for Support Grips.
Example: For Pulling Grips, 30,000 / 5 Safety Factor = 6000 lbs which is the workload factor.
Example: For Support Grips, 11,000 / 10 Safety Factor = 1100 lbs which is the workload factor.
It is impossible to set a safety factor suitable for all cases as operating conditions are never the same.
The load, the speed, the acceleration, the diameter, number of objects gripped, surface of object
being gripped, and the attachments used - all of these should be considered, together with the effects
of abrasion, corrosion, prior use, or abuse, etc. The user-engineer must consider all the variables of
his/her specific application, as well as possible accident consequences, before selecting the safety
factor to be applied. Where the conditions of the application are not well defined or where risk of
personnel or property damage is high, a greater safety factor should be utilized.
Any warranty as to quality, performance or fitness for use of Grips is always premised on the
condition that the published approximate breaking strengths apply only to new, unused grips and
that such products are properly stored, handled, used, maintained, and properly inspected from time
to time during the period of use.
The factory should be consulted for specific application recommendations where approximate
breaking strength and holding power are critical.
33
Technical Reference - Lace & Rod Closing Instructions
• Single weave Grips should be laced with single strand lacing; double weave with double strand.
• Lacing strands should be the same material as the Grip.
1
2
Start the lacing at the lead or
anchoring end of all the Grip.
Thread the lacings through
the first loops of the split and
pull through until the lacings
are centered at this point.
Lace as you would your shoe,
crossing the lacings before
lacing the next two loops.
Don’t pull lacing too tight.
leave a space between
adjoining loops
approximately equal to the
width of one diamond of the
mesh.
3
4
Twist the lacing strands
Wrap the ends of the lacings
tightly together at the tail end once or twice tightly around
of the Grip.
the tail of the Grip, twisting
the ends together securely.
Excess lace can be cut off.
Split Grips, closed with a rod, eliminate the time and guesswork of on-the-job lacing.
The stainless steel rod is a precise built-in feature which makes threading easy and
fast. The strands of the mesh pass around the rod and match up with the strands
from the opposite direction. The rod does not touch the cable at any point and
therefore cannot cut the cable. Rod Closing Grips are salvageable; may be removed and reused as many times as desired.
FAST TO INSTALL
Wrap the Grip around
the cable and thread
the rod through the
preformed loops with
a corkscrew motion,
us-ing the curved end
of the rod to engage
the loops. The action
required is a steady push
and twist simultaneously.
The fingers of the left hand
are used to bring the loops
together just ahead of the
hook on the end of the rod.
To remove, simply pull the
rod out.
1
2
3
34
Technical Reference - Selecting a Grip Size
Selecting Proper Sized Pulling and Support Grips
How To Select Proper Grip Size For One Or More Cables Of EQUAL Diameter
D
o
Example: For four cables bundled together, each with a diameter of 0.30”:
Step 1 Locate “4 Cables” column
Step 2 Read down column to range (0.28" - .031")
Step 3 Read across line to Grip Diameter Range (.062” - .075”)
Grip size is based on the outside diameter or circumference of the cable(s). Use Selection
Table 1 to determine the Grip Diameter Range for one or more cables of equal diameter.
Grip Selection Table for One or More Cables of Equal Diameter
1) Read across top line for number of cables in one grip
2) Read down for diameter of each cable
3) Read across line to Grip Diameter Range column
1 Cable
0.25–0.37
1/4–3/8
0.37–0.50
3/8–1/2
0.50–0.62
1/2–5/8
0.62–0.75
5/8–3/4
0.75–1.00
3/4–1
1.00–1.25
1–1 1/4
1.25–1.50 1 1/4–1 1/2
1.50–1.75 1 1/2–1 3/4
1.75–2.00
1 3/4–2
2.00–2.50
2–2 1/2
2.50–3.00
2 1/2–3
3.00–3.50
3–3 1/2
3.50–4.00
3 1/2–4
35
Table 1: Decimal and Fractional Inch Cable Diameters —
for One or More Cables of Equal Diameter
2 Cables
0.16–0.25
1/64–1/4
0.25–0.36
1/4–23/64
0.27–0.36
17/64–23/64
0.36–0.45
23/64–29/64
0.45–0.60
29/64–39/64
0.60–0.76
39/64–49/64
0.76–0.91
49/64–29/32
0.91–1.08
29/32–1 5/64
1.08–1.23 1 5/64–1 5/64
1.23–1.54 1 5/64–1 35/64
1.54–1.84 1 35/64–1 27/32
1.84–2.15 1 27/32–2 5/32
2.15–2.45 2 5/32–2 29/64
3 Cables
0.15–0.22
0.22–0.33
0.26–0.33
0.33–0.36
0.36–0.49
0.49–0.63
0.63–0.76
0.76–0.89
0.89–1.02
1.02–1.28
1.28–1.53
1.53–1.79
1.79–2.05
5/32–7/32
7/32–21/64
17/64–21/64
21/64–23/64
23/64–31/64
31/64–5/8
5/8–49/64
49/64–57/64
57/64–1 1/64
1 1/64–1 9/32
1 9/32–1 17/32
1 17/32–1 51/64
1 51/64–2 3/64
4 Cables
3
0.12–0.20
1/8–13/64
0.20–0.28
13/64–9/32
0.24–0.28
15/64–9/32
0.28–0.31
9/32–5/16
0.31–0.42
5/16–27/64
0.42–0.54
27/64–35/64
0.54–0.65
35/64–21/32
0.65–0.77
21/32–49/64
0.77–0.88
49/64–7/8
0.88–1.00
7/8–1
1.10–1.32 1 3/32–1 21/64
1.32–1.54 1 21/64–1 35/64
1.54–1.76 1 35/64–1 49/64
Grip Diameter
Range
.250–.375
.375–0.50
0.50–0.75
3
0.62–0.75
4
0.75–1.00
1.00–1.25
1.25–1.50
1.50–1.75
1.75–2.00
2.00–2.50
2.50–3.00
–
3.00–3.50
3.50–4.00
2
Multiple Cable Selection Charts for Cables of Unequal Diameters
Technical Reference - Selecting a Grip Size
How to choose the correct grip size:
3
1
Selecting Proper Sized Pulling and Support Grips
4
1 ) Find the Grip Circumference Range by measuring the circumference of
the bundle of different diameter cables to be gripped (see illustration).
2 ) Divide the bundle circumference by 3.14 to determine the diameter.
3 ) Choose a grip offering a range of cable diameters the same as the cable
diameter.
How To Select Proper Grip Size For Cables Of UNEQUAL Diameters
Step 1 Find the Grip Circumference Range by measuring the circumference of the bundle of different diameter cables to
be gripped (see Illustration).
Step 2 Divide the bundle of circumference by 3.14 to determine the diameter.
Step 3 Choose a grip offering a range of cable diameters the same as the cable diameter.
Table 1: Decimal and Fractional Inch Cable Diameters —
for One or More Cables of Equal Diameter
5 Cables
0.11–0.14
0.14–0.25
0.21–0.25
7/64–9/64
0.10–0.11
7/32–1/4
0.19–0.22
19/64–3/8
0.26–0.34
17/64–11/32
0.43–0.52
7/16–33/64
9/64–1/4
0.25–0.29
1/4–19/64
0.38–0.48
3/8–31/64
0.29–0.38
0.48–0.58
31/64–37/64
0.67–0.77
43/64–49/64
0.58–0.67
0.77–0.96
0.96–1.16
1.16–1.35
6 & 7 Cables
37/64–43/64
49/64–31/32
31/32–1 5/32
0.11–0.25
0.22–0.26
0.34–0.43
3/32–7/64
0.09–0.10
3/16–7/32
0.17–0.20
7/64–1/4
7/32–17/64
11/32–7/16
0.52–0.60
33/64–39/64
0.69–0.86
11/16–55/64
0.60–0.69
0.86–1.03
1 5/32–1 23/64 1.03–1.20
1.35–1.54 1 23/64–1 35/64 1.20–1.37
8 Cables
39/64–11/16
55/64–1 1/32
1 1/32–1 13/64
1 13/64–1 3/8
0.10–0.20
3/32–7/64
0.06–0.09
1/16–3/32
11/64–13/64
0.15–0.19
5/32–3/16
7/64–13/64
0.20–0.23
13/64–15/64
0.31–0.39
5/16–25/64
0.23–0.31
15/64–5/16
0.39–0.46
25/64–15/32
0.54–0.62
35/64–5/8
0.46–0.54
0.62–0.77
0.77–0.93
0.93–1.08
1.08–1.24
9 Cables
15/32–35/64
5/8–49/64
49/64–15/16
15/16–1 5/64
1 5/64–1 15/64
0.09–0.19
3/32–3/16
0.19–0.22
0.22–0.31
0.29–0.36
0.36–0.43
0.43–0.49
3/16–7/32
7/32–5/16
19/64–23/64
23/64–7/16
7/16–31/64
0.49–0.57
31/64–37/64
0.72–0.86
23/32–55/64
0.57–0.72
0.86–1.00
37/64–23/32
1.00–1.14
55/64–1
1–1 9/64
Grip Diameter
Range
.250–.375
.375–0.50
0.50–0.75
0.62–0.75
0.75–1.00
1.00–1.25
1.25–1.50
1.50–1.75
1.75–2.00
2.00–2.50
2.50–3.00
3.00–3.50
3.50–4.00
36
Notes
37
Cross Reference
Cable Range
Ericson Part #
SUPPORT GRIP - DOUBLE EYE, CLOSED MESH
.50 - .62
SG-CM-050-DE
.63 - .74
SG-CM-062-DE
.75 - .99
SG-CM-075-DE
1.00 - 1.24
SG-CM-100-DE
1.25 - 1.49
SG-CM-125-DE
1.50 - 1.74
SG-CM-150-DE
1.75 - 1.99
SG-CM-175-DE
2.00 - 2.49
SG-CM-200-DE
2.50 - 2.99
SG-CM-250-DE
3.00 - 3.49
SG-CM-300-DE
3.50 - 3.99
SG-CM-350-DE
Woodhead
Cooper Wiring
Hubbell/Kellems
P&S
35001
35002
35003
35004
35005
35006
35007
35008
35009
35010
35011
SGD50
SGD63
SGD75
SGD100
SGD125
SGD150
SGD175
SGD-200
SGD-250
SGD300
SGD350
022-01-001
022-01-002
022-01-003
022-01-005
022-01-006
022-01-007
022-01-008
022-01-009
022-01-010
022-01-011
022-01-012
FC050-UU
FC062-UU
FC075-UU
FC100-UU
FC125-UU
FC150-UU
FC175-UU
FC200-UU
FC250-UU
FC300-UU
FC350-UU
.50 - .62
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
SG-CM-050-SE
SG-CM-062-SE
SG-CM-075-SE
SG-CM-100-SE
SG-CM-125-SE
SG-CM-150-SE
SG-CM-175-SE
SG-CM-200-SE
SG-CM-250-SE
SG-CM-300-SE
SG-CM-350-SE
35030
35031
35032
35033
35034
35035
35036
35037
35038
35039
35040
SGS50
SGS63
SGS75
SGS100
SGS125
SGS150
SGS175
SGS200
SGS250
SGS300
SGS350
022-01-013
022-01-014
022-01-015
022-01-017
022-01-018
022-01-019
022-01-020
022-01-021
022-01-022
022-01-023
022-01-024
FC050-U
FC062-U
FC075-U
FC100-U
FC125-U
FC150-U
FC175-U
FC200-U
FC250-U
FC300-U
FC350-U
.50 - .62
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
SG-CM-050-OFS
SG-CM-062-OFS
SG-CM-075-OFS
SG-CM-100-OFS
SG-CM-125-OFS
SG-CM-150-OFS
SG-CM-175-OFS
SG-CM-200-OFS
SG-CM-250-OFS
SG-CM-300-OFS
SG-CM-350-OFS
35060
35061
35062
35063
35064
35065
35066
35067
35068
35069
35070
SG050
SGO63
SGO75
SGO100
SGO125
SGO150
SGO175
SGO200
SGO250
SGO300
SGO350
022-01-037
022-01-038
022-01-039
022-01-041
022-01-042
022-01-043
022-01-044
022-01-045
022-01-046
022-01-047
022-01-048
FC050-OF
FC062-OF
FC075-OF
FC100-OF
FC125-OF
FC150-OF
FC175-OF
FC200-OF
FC250-OF
FC300-OF
FC350-OF
35090
35091
35092
35093
35094
35095
35096
35097
35098
35099
35100
SGU50
SGU63
SGU75
SGU100
SGU125
SGU150
SGU175
SGU200
SGU250
SGU300
SGU350
022-01-051
022-01-052
022-01-053
022-01-050
022-01-054
022-01-055
022-01-056
022-01-057
022-01-058
022-01-059
022-01-060
FC050-LB
FC062-LB
FC075-LB
FC100-LB
FC125-LB
FC150-LB
FC175-LB
FC200-LB
FC250-LB
FC300-LB
FC350-LB
35135
35136
35137
35138
35139
35140
35141
35142
35143
35144
35145
SGDL50
SGDL63
SGDL75
SGDL100
SGDL125
SGDL150
SGDL175
SGDL200
SGDL250
SGDL300
SGDL350
022-02-001
022-02-002
022-02-003
022-02-005
022-02-006
022-02-007
022-02-008
022-02-009
022-02-010
022-02-011
022-02-012
FS050-UU
FS062-UU
FS075-UU
FS100-UU
FS125-UU
FS150-UU
FS175-UU
FS200-UU
FS250-UU
FS300-UU
FS350-UU
35165
35166
35167
35168
35169
35170
35171
35172
35173
35174
35175
SGSL50
SGSL63
SGSL75
SGSL100
SGSL125
SGSL150
SGSL175
SGSL200
SGSL250
SGSL300
SGSL350
022-02-013
022-02-014
022-02-015
022-02-017
022-02-018
022-02-019
022-02-020
022-02-021
022-02-022
022-02-023
022-02-024
FS050-U
FS062-U
FS075-U
FS100-U
FS125-U
FS150-U
FS175-U
FS200-U
FS250-U
FS300-U
FS350-U
.50 - .62
SG-CM-050-UB
.63 - .74
SG-CM-062-UB
.75 - .99
SG-CM-075-UB
1.00 - 1.24
SG-CM-100-UB
1.25 - 1.49
SG-CM-125-UB
1.50 - 1.74
SG-CM-150-UB
1.75 - 1.99
SG-CM-175-UB
2.00 - 2.49
SG-CM-200-UB
2.50 - 2.99
SG-CM-250-UB
3.00 - 3.49
SG-CM-300-UB
3.50 - 3.99
SG-CM-350-UB
SUPPORT GRIP - DOUBLE EYE, LACE CLOSING
.50 - .62
SG-LC-050-DE
.63 - .74
SG-LC-062-DE
.75 - .99
SG-LC-075-DE
1.00 - 1.24
SG-LC-100-DE
1.25 - 1.49
SG-LC-125-DE
1.50 - 1.74
SG-LC-150-DE
1.75 - 1.99
SG-LC-175-DE
2.00 - 2.49
SG-LC-200-DE
2.50 - 2.99
SG-LC-250-DE
3.00 - 3.49
SG-LC-300-DE
3.50 - 3.99
SG-LC-350-DE
.50 - .62
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
SG-LC-050-SE
SG-LC-062-SE
SG-LC-075-SE
SG-LC-100-SE
SG-LC-125-SE
SG-LC-150-SE
SG-LC-175-SE
SG-LC-200-SE
SG-LC-250-SE
SG-LC-300-SE
SG-LC-350-SE
Leviton
38
Cross Reference
Cable Range
Ericson Part #
SUPPORT GRIP - DOUBLE EYE, LACE CLOSING
.50 - .62
SG-LC-050-OFS
.63 - .74
SG-LC-062-OFS
.75 - .99
SG-LC-075-OFS
1.00 - 1.24
SG-LC-100-OFS
1.25 - 1.49
SG-LC-125-OFS
1.50 - 1.74
SG-LC-150-OFS
1.75 - 1.99
SG-LC-175-OFS
2.00 - 2.49
SG-LC-200-OFS
2.50 - 2.99
SG-LC-250-OFS
3.00 - 3.49
SG-LC-300-OFS
3.50 - 3.99
SG-LC-350-OFS
.50 - .62
SG-LC-050-UB
.63 - .74
SG-LC-062-UB
.75 - .99
SG-LC-075-UB
1.00 - 1.24
SG-LC-100-UB
1.25 - 1.49
SG-LC-125-UB
1.50 - 1.74
SG-LC-150-UB
1.75 - 1.99
SG-LC-175-UB
2.00 - 2.49
SG-LC-200-UB
2.50 - 2.99
SG-LC-250-UB
3.00 - 3.49
SG-LC-300-UB
3.50 - 3.99
SG-LC-350-UB
SUPPORT GRIP - DOUBLE EYE, ROD CLOSING
.50 - .62
SG-RC-050-DE
.63 - .74
SG-RC-062-DE
.75 - .99
SG-RC-075-DE
1.00 - 1.24
SG-RC-100-DE
1.25 - 1.49
SG-RC-125-DE
1.50 - 1.74
SG-RC-150-DE
1.75 - 1.99
SG-RC-175-DE
2.00 - 2.49
SG-RC-200-DE
2.50 - 2.99
SG-RC-250-DE
3.00 - 3.49
SG-RC-300-DE
3.50 - 3.99
SG-RC-350-DE
39
Woodhead
Cooper Wiring
Hubbell/Kellems
P&S
35195
35196
35197
35198
35199
35200
35201
35202
35203
35204
35205
SGOL50
SGOL63
SGOL75
SGOL100
SGOL125
SGOL150
SGOL175
SGOL200
SGOL250
SGOL300
SGOL350
022-02-037
022-02-038
022-02-039
022-02-041
022-02-042
022-02-043
022-02-044
022-02-045
022-02-046
022-02-047
022-02-048
FS050-OF
FS062-OF
FS075-OF
FS100-OF
FS125-OF
FS150-OF
FS175-OF
FS200-OF
FS250-OF
FS300-OF
FS350-OF
35225
35226
35227
35228
35229
35230
35231
35232
35233
35234
35235
SGUL50
SGUL63
SGUL75
SGUL100
SGUL125
SGUL150
SGUL175
SGUL200
SGUL250
SGUL300
SGUL350
022-02-050
022-02-051
022-02-052
022-02-054
022-02-055
022-02-056
022-02-057
022-02-058
022-02-059
022-02-060
022-02-061
FS050-LB
FS062-LB
FS075-LB
FS100-LB
FS125-LB
FS150-LB
FS175-LB
FS200-LB
FS250-LB
FS300-LB
FS350-LB
35270
35271
35272
35273
35274
35275
35276
35277
35278
35279
35280
SGDR50
SGDR63
SGDR75
SGDR100
SGDR125
SGDR150
SGDR175
SGDR200
SGDR250
SGDR300
SGDR350
022-03-001
022-03-002
022-03-003
022-03-005
022-03-006
022-03-007
022-03-008
022-03-009
022-03-010
022-03-011
022-03-012
FR050-UU
FR062-UU
FR075-UU
FR100-UU
FR125-UU
FR150-UU
FR175-UU
FR200-UU
FR250-UU
FR300-UU
FR350-UU
.50 - .62
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
SG-RC-050-SE
SG-RC-062-SE
SG-RC-075-SE
SG-RC-100-SE
SG-RC-125-SE
SG-RC-150-SE
SG-RC-175-SE
SG-RC-200-SE
SG-RC-250-SE
SG-RC-300-SE
SG-RC-350-SE
35285
35286
35287
35288
35289
35290
35291
35292
35293
35294
35295
SGSR50
SGSR63
SGSR75
SGSR100
SGSR125
SGSR150
SGSR175
SGSR200
SGSR250
SGSR300
SGSR350
022-03-013
022-03-014
022-03-015
022-03-017
022-03-018
022-03-019
022-03-020
022-03-021
022-03-022
022-03-023
022-03-024
FR050-U
FR062-U
FR075-U
FR100-U
FR125-U
FR150-U
FR175-U
FR200-U
FR250-U
FR300-U
FR350-U
.50 - .62
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
SG-RC-050-OFS
SG-RC-062-OFS
SG-RC-075-OFS
SG-RC-100-OFS
SG-RC-125-OFS
SG-RC-150-OFS
SG-RC-175-OFS
SG-RC-200-OFS
SG-RC-250-OFS
SG-RC-300-OFS
SG-RC-350-OFS
35300
35301
35302
35303
35304
35305
35306
35307
35308
35309
35310
SGOR50
SGOR63
SGOR75
SGOR100
SGOR125
SGOR150
SGOR175
SGOR200
SGOR250
SGOR300
SGOR350
022-03-037
022-03-038
022-03-039
022-03-041
022-03-042
022-03-043
022-03-044
022-03-045
022-03-046
022-03-047
022-03-048
FR050-OF
FR062-OF
FR075-OF
FR100-OF
FR125-OF
FR150-OF
FR175-OF
FR200-OF
FR250-OF
FR300-OF
FR350-OF
.50 - .62
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
SG-RC-050-UB
SG-RC-062-UB
SG-RC-075-UB
SG-RC-100-UB
SG-RC-125-UB
SG-RC-150-UB
SG-RC-175-UB
SG-RC-200-UB
SG-RC-250-UB
SG-RC-300-UB
SG-RC-350-UB
35330
35331
35332
35333
35334
35335
35336
35337
35338
35339
35340
SGUR50
SGUR63
SGUR75
SGUR100
SGUR125
SGUR150
SGUR175
SGUR200
SGUR250
SGUR300
SGUR350
022-03-064
022-03-065
022-03-066
022-03-068
022-03-069
022-03-070
022-03-071
022-03-072
022-03-073
022-03-074
022-03-075
FR050-LB
FR062-LB
FR075-LB
FR100-LB
FR125-LB
FR150-LB
FR175-LB
FR200-LB
FR250-LB
FR300-LB
FR350-LB
Leviton
Cross Reference
Cable Range
Ericson Part #
Woodhead
Cooper Wiring
HEAVY DUTY SUPPORT GRIP - SINGLE EYE, CLOSED MESH, DOUBLE WEAVE
.75 - .99
SGHD-CM-075-SE
35435
SGTS75X
1.00 - 1.24
SGHD-CM-100-SE
35436
SGTS100X
1.25 - 1.49
SGHD-CM-125-SE
35437
SGTS125X
1.50 - 1.99
SGHD-CM-150-SE
35438
SGTS150X
HEAVY DUTY SUPPORT GRIP - DOUBLE EYE, CLOSED MESH, DOUBLE WEAVE
.75 - .99
SGHD-CM-075-DE
35425
SGTD75X
1.00 - 1.24
SGHD-CM-100-DE
35426
SGTD100X
1.25 - 1.49
SGHD-CM-125-DE
35427
SGTD125X
1.50 - 1.99
SGHD-CM-150-DE
35428
SGTD150X
2.00 - 2.49
SGHD-CM-200-DE
35429
SGTD200X
2.50 - 2.99
SGHD-CM-250-DE
35430
SGTD250X
3.00 - 3.49
SGHD-CM-300-DE
35431
SGTD300X
3.50 - 3.99
SGHD-CM-350-DE
35432
SGTD350X
4.00 - 4.49
SGHD-CM-400-DE
35433
SGTD400X
CONDUIT RISER GRIP - SINGLE WEAVE CLOSED MESH
.50 - .62
CRG-C.75-CM-050
R250X
.50 - .62
CRG-C1-CM-050
R350X
.63 - .74
CRG-C1-CM-062
R363X
.50 - .62
CRG-C1.25-CM-050
R450X
.63 - .74
CRG-C1.25-CM-062
R463X
.75 - .99
CRG-C1.25-CM-075
R475X
.50 - .62
CRG-C1.50-CM-050
R550X
.63 - .74
CRG-C1.50-CM-062
R563X
.75 - .99
CRG-C1.50-CM-075
R575X
1.00 - 1.24
CRG-C1.50-CM-100
R5100X
.50 - .62
CRG-C2-CM-050
R650X
.63 - .74
CRG-C2-CM-062
R663X
.75 - .99
CRG-C2-CM-075
R675X
1.00 - 1.24
CRG-C2-CM-100
R6100X
1.25 - 1.49
CRG-C2-CM-125
R6125X
.50 - .62
CRG-C2.50-CM-050
R750X
.63 - .74
CRG-C2.50-CM-062
R763X
.75 - .99
CRG-C2.50-CM-075
R775X
1.00 - 1.24
CRG-C2.50-CM-100
R7100X
1.25 - 1.49
CRG-C2.50-CM-125
R7125X
1.50 - 1.74
CRG-C2.50-CM-150
R7150X
1.75 - 1.99
CRG-C2.50-CM-175
R7175X
Hubbell/Kellems
P&S
022-06-010
022- 06-011
022-06-012
022-06-013
FCHL075-U
FCHL100-U
FCHL125-U
FCHL150-U
022-06-001
022-06-002
022-06-003
022-06-004
022-06-005
022-06-006
022-06-007
022-06-008
022-06-009
FCHL075-UU
FCHL100-UU
FCHL125-UU
FCHL150-UU
FCHL200-UU
FCHL250-UU
FCHL300-UU
FCHL350-UU
FCHL400-UU
Leviton
022-11-106
022-11-100
022-11-101
022-11-001
022-11-002
022-11-003
022-11-005
022-11-006
022-11-007
022-11-009
022-11-102
022-11-107
022-11-010
022-11-012
022-11-013
022-11-108
022-11-109
022-11-014
022-11-016
022-11-017
022-11-018
022-11-019
.50 - .62
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
CRG-C3-CM-050
CRG-C3-CM-062
CRG-C3-CM-075
CRG-C3-CM-100
CRG-C3-CM-125
CRG-C3-CM-150
CRG-C3-CM-175
CRG-C3-CM-200
R850X
R863X
R875X
R8100X
R8125X
R8150X
R8175X
R8200X
022-11-110
N/A
022-11-020
022-11-022
022-11-023
022-11-024
022-11-025
022-11-026
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
CRG-C3.50-CM-062
CRG-C3.50-CM-075
CRG-C3.50-CM-100
CRG-C3.50-CM-125
CRG-C3.50-CM-150
CRG-C3.50-CM-175
CRG-C3.50-CM-200
CRG-C3.50-CM-250
R963X
R975X
R9100X
R9125X
R9150X
R9175X
R9200X
R9250X
N/A
N/A
N/A
022-11-030
022-11-031
022-11-032
022-11-033
022-11-034
.63 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 -1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
CRG-C4-CM-062
CRG-C4-CM-075
CRG-C4-CM-100
CRG-C4-CM-125
CRG-C4-CM-150
CRG-C4-CM-175
CRG-C4-CM-200
CRG-C4-CM-250
CRG-C4-CM-300
R1063X
R1075X
R10100X
R10125X
R10150X
R10175X
R10200X
R10250X
R10300X
022-11-113
022-11-035
022-11-037
022-11-038
022-11-039
022-11-040
022-11-041
022-11-042
022-11-043
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
CRG-C4.50-CM-075
CRG-C4.50-CM-100
CRG-C4.50-CM-125
CRG-C4.50-CM-150
CRG-C4.50-CM-175
R1175X
R11100X
R11125X
R11150X
R11175X
N/A
N/A
N/A
N/A
N/A
40
Cross Reference
Cable Range
Ericson Part #
Woodhead
Cooper Wiring
Hubbell/Kellems
R11200X
R11250X
R11300X
R11350X
N/A
022-11-051
022-11-052
022-11-053
R1275X
R12100X
R12125X
R12150X
R12175X
R12200X
R12250X
R12300X
R12350X
N/A
N/A
N/A
N/A
022-11-059
022-11-060
022-11-061
022-11-062
022-11-063
R1475X
R14100X
R14125X
R14150X
R14175X
R14200X
R14250X
R14300X
R14350X
N/A
N/A
N/A
N/A
N/A
N/A
022-11-071
022-11-072
022-11-073
RTL475X
022-12-003
CONDUIT RISER GRIP - SINGLE WEAVE CLOSED MESH
2.00 - 2.49
CRG-C4.50-CM-200
2.50 - 2.99
CRG-C4.50-CM-250
3.00 - 3.49
CRG-C4.50-CM-300
3.50 - 3.99
CRG-C4.50-CM-350
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
CRG-C5-CM-075
CRG-C5-CM-100
CRG-C5-CM-125
CRG-C5-CM-150
CRG-C5-CM-175
CRG-C5-CM-200
CRG-C5-CM-250
CRG-C5-CM-300
CRG-C5-CM-350
.75 - .99
CRG-C6-CM-075
1.00 - 1.24
CRG-C6-CM-100
1.25 - 1.49
CRG-C6-CM-125
1.50 - 1.74
CRG-C6-CM-150
1.75 - 1.99
CRG-C6-CM-175
2.00 - 2.49
CRG-C6-CM-200
2.50 - 2.99
CRG-C6-CM-250
3.00 - 3.49
CRG-C6-CM-300
3.50 - 3.99
CRG-C6-CM-350
CONDUIT RISER GRIP - DOUBLE WEAVE, SPLIT MESH, LACE CLOSING
.75 - .99
CRG-C1.25-LC-075
41
.75 - .99
1.00 - 1.24
CRG-C1.5-LC-075
CRG-C1.5-LC-100
RTL575X
RTL5100X
022-12-007
022-12-009
.75 - .99
1.00 - 1.24
1.25 - 1.49
CRG-C2-LC-075
CRG-C2-LC-100
CRG-C2-LC-125
RTL675X
RTL6100X
RTL6125X
022-12-010
022-12-012
022-12-013
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
CRG-C2.5-LC-075
CRG-C2.5-LC-100
CRG-C2.5-LC-125
CRG-C2.5-LC-150
CRG-C2.5-LC-175
RTL775X
RTL7100X
RTL7125X
RTL7150X
RTL7175X
022-12-014
022-12-016
022-12-017
022-12-018
022-12-019
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
CRG-C3-LC-075
CRG-C3-LC-100
CRG-C3-LC-125
CRG-C3-LC-150
CRG-C3-LC-175
CRG-C3-LC-200
RTL875X
RTL8100X
RTL8125X
RTL8150X
RTL8175X
RTL8200X
022-12-020
022-12-022
022-12-023
022-12-024
022-12-025
022-12-026
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
CRG-C3.5-LC-075
CRG-C3.5-LC-100
CRG-C3.5-LC-125
CRG-C3.5-LC-150
CRG-C3.5-LC-175
CRG-C3.5-LC-200
CRG-C3.5-LC-250
RTL975X
RTL9100X
RTL9125X
RTL9150X
RTL9175X
RTL9200X
RTL9250X
N/A
N/A
N/A
N/A
N/A
022-12-033
022-12-034
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
CRG-C4-LC-075
CRG-C4-LC-100
CRG-C4-LC-125
CRG-C4-LC-150
CRG-C4-LC-175
CRG-C4-LC-200
CRG-C4-LC-250
CRG-C4-LC-300
RTL1075X
RTL10100X
RTL10125X
RTL10150X
RTL10175X
RTL10200X
RTL10250X
RTL10300X
022-12-035
022-12-037
022-12-038
022-12-039
022-12-040
022-12-041
022-12-042
022-12-043
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
CRG-C4.5-LC-075
CRG-C4.5-LC-100
CRG-C4.5-LC-125
CRG-C4.5-LC-150
CRG-C4.5-LC-175
CRG-C4.5-LC-200
CRG-C4.5-LC-250
RTL1175X
RTL11100X
RTL11125X
RTL11150X
RTL11175X
RTL11200X
RTL11250X
N/A
N/A
N/A
N/A
N/A
N/A
N/A
P&S
Leviton
Cross Reference
Cable Range
Ericson Part #
Woodhead
Cooper Wiring
CONDUIT RISER GRIP - DOUBLE WEAVE, SPLIT MESH, LACE CLOSING
3.00 - 3.49
CRG-C4.5-LC-300
RTL11300X
3.50 -3.99
CRG-C4.5-LC-350
RTL11350X
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
CRG-C5-LC-075
CRG-C5-LC-100
CRG-C5-LC-125
CRG-C5-LC-150
CRG-C5-LC-175
CRG-C5-LC-200
CRG-C5-LC-250
CRG-C5-LC-300
CRG-C5-LC-350
.75 - .99
CRG-C6-LC-075
1.00 - 1.24
CRG-C6-LC-100
1.25 - 1.49
CRG-C6-LC-125
1.50 - 1.74
CRG-C6-LC-150
1.75 - 1.99
CRG-C6-LC-175
2.00 - 2.49
CRG-C6-LC-200
2.50 - 2.99
CRG-C6-LC-250
3.00 - 3.49
CRG-C6-LC-300
3.50 - 3.99
CRG-C6-LC-350
CONDUIT RISER GRIP - SINGLE WEAVE, SPLIT MESH, ROD CLOSING
.75 - .99
CRG-C1.5-RC-075
1.00 - 1.24
CRG-C1.5-RC-100
Hubbell/Kellems
P&S
Leviton
N/A
N/A
RTL1275X
RTL12100X
RTL12125X
RTL12150X
RTL12175X
RTL12200X
RTL12250X
RTL12300X
RTL12350X
N/A
N/A
N/A
N/A
N/A
N/A
022-12-061
022-12-062
022-12-063
RTL1475X
RTL14100X
RTL14125X
RTL14150X
RTL14175X
RTL14200X
RTL14250X
RTL14300X
RTL14350X
N/A
N/A
N/A
N/A
N/A
N/A
022-12-071
022-12-072
022-12-073
022-13-007
022-13-009
.75 - .99
1.00 - 1.24
1.25 - 1.49
CRG-C2-RC-075
CRG-C2-RC-100
CRG-C2-RC-125
RR675X
RR6100X
RR6125X
022-13-010
022-13-012
022-13-013
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
CRG-C2.5-RC-075
CRG-C2.5-RC-100
CRG-C2.5-RC-125
CRG-C2.5-RC-150
CRG-C2.5-RC-175
RR775X
RR7100X
RR7125X
RR7150X
RR7175X
022-13-014
022-13-016
022-13-017
022-13-018
022-13-019
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
CRG-C3-RC-075
CRG-C3-RC-100
CRG-C3-RC-125
CRG-C3-RC-150
CRG-C3-RC-175
CRG-C3-RC-200
RR875X
RR8100X
RR8125X
RR8150X
RR8175X
RR8200X
022-13-020
022-13-022
022-13-023
022-13-024
022-13-025
022-13-026
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
CRG-C3.5-RC-075
CRG-C3.5-RC-100
CRG-C3.5-RC-125
CRG-C3.5-RC-150
CRG-C3.5-RC-175
CRG-C3.5-RC-200
CRG-C3.5-RC-250
RR975X
RR9100X
RR9125X
RR9150X
RR9175X
RR9200X
RR9250X
N/A
N/A
N/A
N/A
N/A
022-13-033
022-13-034
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
CRG-C4-RC-075
CRG-C4-RC-100
CRG-C4-RC-125
CRG-C4-RC-150
CRG-C4-RC-175
CRG-C4-RC-200
CRG-C4-RC-250
CRG-C4-RC-300
RR1075X
RR10100X
RR10125X
RR10150X
RR10175X
RR10200X
RR10250X
RR10300X
022-13-035
022-13-037
022-13-038
022-13-039
022-13-040
022-13-041
022-13-042
022-13-043
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.74
1.75 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
CRG-C4.5-RC-075
CRG-C4.5-RC-100
CRG-C4.5-RC-125
CRG-C4.5-RC-150
CRG-C4.5-RC-175
CRG-C4.5-RC-200
CRG-C4.5-RC-250
CRG-C4.5-RC-300
CRG-C4.5-RC-350
RR1175X
RR11100X
RR11125X
RR11150X
RR11175X
RR11200X
RR11250X
RR11300X
RR11350X
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
42
Cross Reference
Cable Range
Ericson Part #
Woodhead Cooper Wiring
CONDUIT RISER GRIP - SINGLE WEAVE, SPLIT MESH, ROD CLOSING
.75 - .99
CRG-C5-RC-075
RR1275X
1.00 - 1.24
CRG-C5-RC-100
RR12100X
1.25 - 1.49
CRG-C5-RC-125
RR12125X
1.50 - 1.74
CRG-C5-RC-150
1.75 - 1.99
CRG-C5-RC-175
2.00 - 2.49
CRG-C5-RC-200
2.50 - 2.99
CRG-C5-RC-250
RR12250X
3.00 - 3.49
CRG-C5-RC-300
RR12300X
3.50 - 3.99
CRG-C5-RC-350
RR12350X
.75 - .99
CRG-C6-RC-075
1.00 - 1.24
CRG-C6-RC-100
1.25 -1.49
CRG-C6-RC-125
1.50 -1.74
CRG-C6-RC-150
1.75 - 1.99
CRG-C6-RC-175
2.00 - 2.49
CRG-C6-RC-200
2.50 - 2.99
CRG-C6-RC-250
3.00 - 3.49
CRG-C6-RC-300
3.50 - 3.99
CRG-C6-RC-350
SERVICE DROPS - SINGLE EYE
.23 - .31
SD-23-SE
.32 - .43
SD-32-SE
.43 - .56
SD-43-SE
.56 - .73
SD-56-SE
.73 - .85
SD-73-SE
.85 - 1.00
SD-85-SE
1.00 - 1.25
SD-100-SE
SERVICE DROPS - UNIVERSAL BALE (STANDARD)
.23 - .31
SD-23-UB
.32 - .43
SD-32-UB
.43 - .56
SD-43-UB
.56 - .73
SD-56-UB
.73 - .85
SD-73-UB
.85 - 1.00
SD-85-UB
1.00 - 1.25
SD-100-UB
SERVICE DROPS - SINGLE EYE (HEAVY DUTY)
.23 - .31
SDHD-23-SE
.32 - .43
SDHD-32-SE
.43 - .56
SDHD-43-SE
.56 - .73
SDHD-56-SE
.73 - .85
SDHD-73-SE
.85 - 1.00
SDHD-85-SE
1.00 - 1.25
SDHD-100-SE
SERVICE DROPS - UNIVERSAL BALE (HEAVY DUTY)
.23 - .31
SDHD-23-UB
.32 - .43
SDHD-32-UB
.43 - .56
SDHD-43-UB
.56 - .73
SDHD-56-UB
.73 - .85
SDHD-73-UB
.85 - 1.00
SDHD-85-UB
1.00 - 1.25
SDHD-100-UB
LIGHT DUTY PULLING GRIPS - SHORT
.50 - .61
LDPG-050-S
35901
.62 - .74
LDPG-062-S
35902
.75 - .99
LDPG-075-S
35903
1.00 - 1.24
LDPG-100-S
35904
1.25 - 1.49
LDPG-125-S
35905
1.50 - 1.74
LDPG-150-S
35906
1.75 - 1.99
LDPG-175-S
35907
2.00 - 2.49
LDPG-200-S
35908
2.50 - 2.99
LDPG-250-S
35909
3.00 - 3.49
LDPG-300-S
N/A
LIGHT DUTY PULLING GRIPS - STANDARD
.50 - .61
LDPG-050
35910
.62 - .74
LDPG-062
35911
.75 - .99
LDPG-075
35912
1.00 - 1.24
LDPG-100
35913
1.25 - 1.49
LDPG-125
35914
1.50 - 1.99
LDPG-150
35915
2.00 - 2.49
LDPG-200
35916
2.50 - 2.99
LDPG-250
35917
Hubbell/Kellems
P&S
N/A
N/A
N/A
N/A
N/A
N/A
022-13-061
022-13-062
022-13-063
RR1475X
RR14100X
RR14125X
RR14150X
RR14175X
RR14200X
RR14250X
RR14300X
RR14350X
N/A
N/A
N/A
N/A
N/A
N/A
022-13-071
022-13-072
022-13-073
SDS23X
SDS32X
SDS43X
SDS56X
SDS73X
SDS85X
SDS100X
022-16-001
*022-16-002 / 022-16-003
*022-16-004 / 022-16-005
*022-16-006 / 022-16-007 / *022-16-008
*022-16-009 / 022-16-010
*022-16-011 / 022-16-012 / *022-16-013
022-16-014 / 022-16-015
FCSD4
FCSD5 / FCSD6
FCSD7 / FCSD8
FCSD9 / FCSD10 / FCSD11
FCSD12 / FCSD13
FCSD14 / FCSD15
FCSD16 / FCSD17 / FCSD18
SDU23X
SDU32X
SDU43X
SDU56X
SDU73X
SDU85X
SDU100X
022-16-016
FCSD4-LB
*022-16-017 / 022-16-018
FCSD5-LB /FCSD6-LB
*022-16-019 / 022-16-020
FCSD7-LB / FCSD8-LB
*022-016-021 / 022-16-022 / *022-16-023 FCSD9-LB / FCSD10-LB / FCSD11-LB / FCSD10-LB
*022-16-024 / 022-16-025
FCSD12-LB / FCSD13-LB
*022-16-026 / 022-16-027 / *022-16-028
FCSD14-LB / FCSD15-LB
022-16-029 / 022-16-030
FCSD16-LB / FCSD17-LB / FCSD18-LB
SDTS23X
SDTS32X
SDTS43X
SDTS56X
SDTS73X
SDTS85X
SDTS100X
022-17-001
*022-17-002 / 022-17-003
*022-17-004 / 022-17-005
*022-17-006 / 022-17-007 / *022-17-008
*022-17-009 / 022-17-010
*022-17-011 / 022-17-012 / *022-17-013
022-17-014 / 022-17-015
SDTU23X
SDTU32X
SDTU43X
SDTU56X
SDTU73X
SDTU85X
SDTU100X
022-17-016
*022-17-017 / 022-17-018
*022-17-019 / 022-17-020
*022-17-021 / 022-17-022 / *022-17-023
*022-17-024 / 022-17-025
*022-17-026 / 022-17-027 / *022-17-028
022-17-029 / 022-17-030
LP5011X
LP6211X
LP7512X
LP10013X
LP12514X
LP15015X
LP17517X
LP20018X
LP25018X
LP30020X
033-03-001
033-03-002
033-03-003
033-03-004
033-03-005
033-03-006
033-03-007
033-03-008
033-03-009
N/A
LP5016X
LP6216X
LP7520X
LP10020X
LP12521X
LP15023X
LP20025X
LP25027X
033-03-010
033-03-011
033-03-012
033-03-013
033-03-015
033-03-016
033-03-017
033-03-018
*CORD DIAMETER RANGE IS SLIGHTLY DIFFERENT
43
Leviton
Cross Reference
Cable Range
Ericson Part #
Woodhead
LIGHT DUTY PULLING GRIPS - STANDARD
3.00 - 3.49
LDPG-300
35918
3.50 - 3.99
LDPG-350
N/A
UTILITY PULLING GRIPS - STANDARD FLEXIBLE EYE - T TYPE
.50 - .61
UPG-50-FE
.62 - .74
UPG-62-FE
.75 - .99
UPG-75-FE
1.00 - 1.49
UPG-100-FE
1.50 - 1.99
UPG-150-FE
2.00 - 2.49
UPG-200-FE
2.50 - 2.99
UPG-250-FE
3.00 - 3.49
UPG-300-FE
3.50 - 3.99
UPG-350-FE
LIGHT DUTY PULLING GRIPS - JUNIOR
.25 - .36
JPG-25
35970
.37 - .49
JPG-37
35971
.50 - .61
JPG-50
35972
.62 - .74
JPG-62
35973
.75 - .99
JPG-75
35974
1.00 - 1.25
JPG-100
33975
.25 - 1.25(6PC KIT)
JPG-KIT
35976
STRAIN RELIEF - NON INSULATED WIDE RANGE
.24 - .32
SR-022
.32 - .43
SR-030
36503
.43 - .54
SR-040
36505
.54 - .73
SR-052
36508
.73 - .97
SR-070
36512
.97 - 1.25
SR-094
36515
Cooper Wiring
Hubbell/Kellems
LP30030X
LP35032X
033-03-019
033-03-029
UPF5020X
UPF6224X
UPF7536X
UPF10036X
UPF15036X
UPF20036X
UPF25038X
UPF30040X
UPF35040X
N/A
N/A
033-04-1091
033-04-1092
033-04-1093
033-04-1094
033-04-1095
033-04-1096
033-04-1097
LPJ25X
LPJ37X
LPJ50X
LPJ62X
LPJ75X
LPJ100X
LPJ KITX
033-05-001
033-05-002
033-05-003
033-05-004
033-05-005
033-05-006
033-05-1114
TC124X
TC132X
TC143X
TC254X
TC373X
TC497X
073-03-1200
073-03-1201
073-03-1202
073-03-1203
073-03-1204
073-03-1205
P&S
Leviton
BOX22
BOX30
BOX40
BOX52
BOX70
BOX94
L7502
L7503
L7504
L7505
44
Cross Reference
Cable Range
Ericson Part #
Woodhead
STRAIN RELIEF - INSULATED WIDE RANGE
.24 - .32
SRI-022
.32 - .43
SRI-030
.43 - .54
SRI-040
.54 - .73
SRI-052
.73 - .97
SRI-070
.97 - 1.25
SRI-094
1.25 - 1.50
SRI-120
1.50 - 1.70
SRI-140
1.70 - 2.00
SRI-162
2.00 - 2.45
SRI-200
BUS DROP GRIPS - SINGLE EYE, WIDE RANGE
.22 - .32
BD-022-SE
.30 - .43
BD-030-SE
.41 - .56
BD-041-SE
.53 - .73
BD-053-SE
.70 - .85
BD-070-SE
.82 -1.00
BD-082-SE
.96 - 1.25
BD-096-SE
1.25 - 1.50
BD-125-SE
BUS DROP GRIPS - UNVERSAL EYE, WIDE RANGE
.22 - .32
BD-022-UB
.30 - .43
BD-030-UB
.41 - .56
BD-041-UB
.53 - .73
BD-053-UB
.70 - .85
BD-070-UB
.82 - 1.00
BD-082-UB
.96 - 1.25
BD-096-UB
BUS DROP GRIPS - SAFETY SPRINGS
40LB SPRING
80LB SPRING
DELUXE CORD GRIP
.18 - .25
DCG-25-F1
.25 - .37
DCG-37-F1
.37 - .43
DCG-43-F1
.18 - .25
.25 - .37
.37 - .43
.43 - .50
.50 - .62
DCG-25-F2
DCG-37-F2
DCG-43-F2
DCG-50-F2
DCG-62-F2
.18 - .25
.25 - .37
.37 - .50
.50 - .62
.62 - .75
DCG-25-F3
DCG-37-F3
DCG-50-F3
DCG-62-F3
DCG-75-F3
.37 - .50
.50 - .62
.62 - .75
.75 - .87
.87 - 1.00
DCG-50-F4
DCG-62-F4
DCG-75-F4
DCG-87-F4
DCG-100-F4
.75 - .87
.87 - 1.00
1.00 - 1.125
1.12 - 1.25
1.25 - 1.37
DCG-87-F5
DCG-100-F5
DCG-112-F5
DCG-125-F5
DCG-137-F5
.75 - .87
.87 - 1.00
1.00 - 1.125
1.125 - 1.25
1.25 - 1.37
1.37 - 1.43
DCG-87-F6
DCG-100-F6
DCG-112-F6
DCG-125-F6
DCG-137-F6
DCG-143-F6
1.200 - 1.375
1.375 - 1.500
1.500 - 1.625
1.625 - 1.750
1.750 - 1.875
DCG-137-F7
DCG-150-F7
DCG-162-F7
DCG-175-F7
DCG-187-F7
Cooper Wiring
Hubbell/Kellems
P&S
36501
36503
36505
36508
36512
36515
36516
36517
36518
36519
TCI124X
TCI132X
TCI143X
TCI254X
TCI373X
TCI497X
TCI5125X
TCI6150X
TCI7170X
TCI7200X
073-03-1206
073-03-1207
073-03-1208
073-03-1209
073-03-1210
073-03-1211
073-03-1212
073-03-1213
073-03-1214
073-03-1215
BOX22
BOX30
BOX40
BOX52
BOX70
BOX94
BOX120
BOX140
N/A
N/A
36560
36562
36564
36567
36569
36571
36574
BDS22X
BDS30X
BDS41X
BDS53X
BDS70X
BDS82X
BDS96X
073-04-1276
073-04-1277
073-04-1278
073-04-1279
073-04-1280
073-04-1281
073-04-1282
FC22
FC30
FC40
FC52
FC70
FC70
FC94
36580
36582
36584
36587
36589
36591
36594
BDU22X
BDU30X
BDU41X
BDU53X
BDU70X
BDU82X
BDU96X
073-04-1283
073-04-1284
073-04-1285
073-04-1286
073-04-1287
073-04-1288
073-04-1289
FC22-LB
FC30-LB
FC40-LB
FC52-LB
FC70-LB
N/A
FC95-LB
36237
36238
B2001X
B2002X
203-02-001
203-02-002
203-02-001
203-02-002
DC000375X
N/A
074-01-001/ 074-01-002
074-01-003
DC100375X
DC100500X
074-01-004
074-01-006
074-01-008
074-01-008
074-01-010
DC200375X
DC200500X
DC200625X
074-01-011
074-01-013
074-01-015
074-01-017
074-01-018
DC300375X
DC300500X
DC300625X
DC300750X
DC300875X
074-01-1195
074-01-019
074-01-021
074-01-023
074-01-025
DC400875X
DC4001000X
DC4001188X
074-01-1251
074-01-026
074-01-027
074-01-028
074-01-1178
DC500875X
DC5001000X
DC5001188X
074-01-1252
074-01-029
074-01-030
074-01-031
074-01-032
*074-01-1253
1300970163
1300970167
1300970168
1300970170
1300970171
1300970175
DC5001375X
DC6001375X
DC6001625X
N/A
N/A
N/A
N/A
074-01-1260
45
Leviton
L7982
L7983
L7984
L7985
Cross Reference
Cable Range
DELUXE CORD GRIP
1.875 - 1.937
1.937 - 2.000
Ericson Part #
1.687 - 1.812
1.812 - 1.937
1.937 - 2.062
2.062 - 2.187
2.187 - 2.312
2.312 - 2.437
DCG-181-F8
DCG-193-F8
DCG-206-F8
DCG-218-F8
DCG-231-F8
DCG-243-F8
DC7002188X
074-01-1030
074-01-1031
074-01-1032
074-01-1033
074-01-1034
074-01-1266
2.437 - 2.625
2.625 - 2.812
2.812 - 3.00
DCG-262-F9
DCG-281-F9
DCG-300-F9
DC8002188X
-
074-01-1186
074-01-1187
074-01-1188
.18 - .25
.25 - .37
.37 - .43
DCG-25-F1-90
DCG-37-F1-90
DCG-43-F1-90
-
N/A
074-01-071 / 074-01-072
074-01-073
.18 - .25
.25 - .37
.37 - .43
.43 - .50
.50 - .62
DCG-25-F2-90
DCG-37-F2-90
DCG-43-F2-90
DCG-50-F2-90
DCG-62-F2-90
DC190375X
DC190500X
074-01-074
074-01-076
074-01-078
074-01-078
074-01-080
.18 - .25
.25 - .37
.37 - .50
.50 - .62
.62 - .75
DCG-25-F3-90
DCG-37-F3-90
DCG-50-F3-90
DCG-62-F3-90
DCG-75-F3-90
DC290375X
DC290500X
DC290625X
N/A
N/A
074-01-081
074-01-083
074-01-084
.37 -.50
.50 -.62
.62 - .75
.75 -.87
.87 - 1.00
DCG-50-F4-90
DCG-62-F4-90
DCG-75-F4-90
DCG-87-F4-90
DCG-100-F4-90
DC390500X
DC390625X
DC390750X
DC390875X
074-01-1197
074-01-085
074-01-087
074-01-089
074-01-091
.75 - .87
.87 - 1.00
1.00 - 1.125
1.12 - 1.25
1.25 - 1.37
DCG-87-F5-90
DCG-100-F5-90
DCG-112-F5-90
DCG-125-F5-90
DCG-137-F5-90
DC490875X
DC4901000X
DC4901188X
074-01-1230
074-01-137
074-01-108
074-01-1042
N/A
.75 - .87
.87 - 1.00
1.00 - 1.125
1.125 - 1.25
1.25 - 1.37
1.37 - 1.43
DCG-87-F6-90
DCG-100-F6-90
DCG-112-F6-90
DCG-125-F6-90
DCG-137-F6-90
DCG-143-F6-90
DC5901375X
N/A
074-01-1044
074-01-1045
074-01-1046
074-01-1047
N/A
1.200 - 1.375
1.375 - 1.500
1.500 - 1.625
1.625 - 1.750
1.750 - 1.875
1.875 - 1.937
1.937 - 2.000
DCG-137-F7-90
DCG-150-F7-90
DCG-162-F7-90
DCG-175-F7-90
DCG-187-F7-90
DCG-197-F7-90
DCG-200-F7-90
DC6901875X
N/A
N/A
N/A
N/A
074-01-1234
N/A
N/A
.18 - .25
.25 - .37
.37 - .43
DCG-25-F1-45
DCG-37-F1-45
DCG-43-F1-45
-
N/A
N/A
N/A
.18 - .25
.25 - .37
.37 - .43
.43 - .50
.50 - .62
DCG-25-F2-45
DCG-37-F2-45
DCG-43-F2-45
DCG-50-F2-45
DCG-62-F2-45
DC145375X
DC145500X
N/A
074-01-1236
074-01-1021
074-01-1021
074-01-1237
.18 - .25
.25 - .37
.37 - .50
.50 - .62
DCG-25-F3-45
DCG-37-F3-45
DCG-50-F3-45
DCG-62-F3-45
DC245375X
DC245500X
N/A
N/A
074-01-1238
074-01-1049
DCG-193-F7
DCG-200-F7
Woodhead
Cooper Wiring
Hubbell/Kellems
DC6001875X
N/A
N/A
DC7001625X
DC7001625X
DC7001875X
DC7001875X
P&S
Leviton
46
Cross Reference
Cable Range
Ericson Part #
DELUXE CORD GRIP
.62 - .75
Woodhead
Cooper Wiring
Hubbell/Kellems
DCG-75-F3-45
DC245625X
074-01-1051
.37 - .50
.50 - .62
.62 - .75
.75 - .87
.87 - 1.00
DCG-50-F4-45
DCG-62-F4-45
DCG-75-F4-45
DCG-87-F4-45
DCG-100-F4-45
DC345500X
DC345625X
DC345750X
DC345875X
N/A
074-01-1053
074-01-1055
074-01-1057
074-01-1199
.75 - .87
.87 - 1.00
1.00 - 1.125
1.12 - 1.25
1.25 - 1.37
DCG-87-F5-45
DCG-100-F5-45
DCG-112-F5-45
DCG-125-F5-45
DCG-137-F5-45
DC445875X
DC4451000X
074-01-1241
074-01-1022
074-01-1059
074-01-1060
074-01-1061
.75 - .87
.87 - 1.00
1.00 - 1.125
1.125 - 1.25
1.25 - 1.37
1.37 - 1.43
DCG-87-F6-45
DCG-100-F6-45
DCG-112-F6-45
DCG-125-F6-45
DCG-137-F6-45
DCG-143-F6-45
DC5451375X
DC5451625X
N/A
N/A
074-01-1063
074-01-1064
074-01-1065
N/A
.18 - .25
.25 - .37
.37 - .43
DCG-25-F1-F
DCG-37-F1-F
DCG-43-F1-F
-
N/A
074-01-036 / 074-01-037
074-01-038
.18 - .25
.25 - .37
.37 - .43
.43 - .50
.50 - .62
DCG-25-F2-F
DCG-37-F2-F
DCG-43-F2-F
DCG-50-F2-F
DCG-62-F2-F
-
-
074-01-039
074-01-041
074-01-043
074-01-043
074-01-045
.18 - .25
.25 - .37
.37 - .50
.50 - .62
.62 - .75
DCG-25-F3-F
DCG-37-F3-F
DCG-50-F3-F
DCG-62-F3-F
DCG-75-F3-F
DCF200500X
DCF200625X
N/A
074-01-048
074-01-050
074-01-052
074-01-053
.37 - .50
.50 - .62
.62 - .75
.75 - .87
.87 - 1.00
DCG-50-F4-F
DCG-62-F4-F
DCG-75-F4-F
DCG-87-F4-F
DCG-100-F4-F
DCF300500X
DCF300625X
DCF300750X
DCF300875X
N/A
074-01-054
074-01-056
074-01-058
074-01-060
.75 - .87
.87 - 1.00
1.00 - 1.125
1.12 - 1.25
1.25 - 1.37
DCG-87-F5-F
DCG-100-F5-F
DCG-112-F5-F
DCG-125-F5-F
DCG-137-F5-F
DCF400875X
DCF4001000X
DCF4001188X
N/A
N/A
N/A
N/A
N/A
.75 - .87
.87 - 1.00
1.00 - 1.125
1.125 - 1.25
1.25 - 1.37
1.37 - 1.43
CORD GRIP
.18 - .25
.25 - .37
.37 - .43
DCG-87-F6-F
DCG-100-F6-F
DCG-112-F6-F
DCG-125-F6-F
DCG-137-F6-F
DCG-143-F6-F
DCF5001375X
N/A
N/A
N/A
N/A
N/A
N/A
DC4451188X
DCF100375X
CG-25-F1
CG-37-F1
CG-43-F1
SHC-1009
SHC-1010 / SHC-1011
SHC-1012
.18 - .25
.25 - .37
.37 - .43
.43 - .50
.50 - .62
CG-25-F2
CG-37-F2
CG-43-F2
CG-50-F2
CG-62-F2
SHC-1015 / SHC-1021
SHC-1016 / 1017 / 1022
SHC-1018
*SHC-1023 / *SHC-1025
SHC-1024 / SHC-1026
.18 - .25
.25 - .37
.37 - .50
.50 - .62
.62 - .75
CG-25-F3
CG-37-F3
CG-50-F3
CG-62-F3
CG-75-F3
SHC-1031
SHC-1032
SHC-1033
SHC-1034 / SHC-1036
SHC-1037
P&S
47
Leviton
Cross Reference
Cable Range
CORD GRIP
.37 - .50
.50 - .62
.62 - .75
.75 - .87
.87 - 1.00
Ericson Part #
Woodhead
Cooper Wiring
Hubbell/Kellems
CG-50-F4
CG-62-F4
CG-75-F4
CG-87-F4
CG-100-F4
SHC-1039
SHC-1040
SHC-1041
SHC-1042
SHC-1043
.75 - .87
.87 - 1.00
1.00 - 1.125
1.12 - 1.25
1.25 - 1.37
CG-87-F5
CG-100-F5
CG-112-F5
CG-125-F5
CG-137-F5
SHC-1050
SHC-1051
SHC-1052
SHC-1053
SHC-1054
.75 - .87
.87 - 1.00
1.00 - 1.125
1.125 - 1.25
1.25 - 1.37
1.37 - 1.43
CG-87-F6
CG-100-F6
CG-112-F6
CG-125-F6
CG-137-F6
CG-143-F6
SHC-1055
SHC-1056
SHC-1057
SHC-1058
SHC-1059
*SHC-1061
1.200 - 1.375
1.375 - 1.500
1.500 - 1.625
1.625 - 1.750
1.750 - 1.875
1.875 - 1.937
1.937 - 2.000
CG-137-F7
CG-150-F7
CG-162-F7
CG-175-F7
CG-187-F7
CG-193-F7
CG-200-F7
SHC-1065
SHC-1066
SHC-1067
SHC-1068
SHC-1069
SHC-1071
SHC-1072
1.687 - 1.812
1.812 - 1.937
1.937 - 2.062
2.062 - 2.187
2.187 - 2.312
2.312 - 2.437
CG-181-F8
CG-193-F8
CG-206-F8
CG-218-F8
CG-231-F8
CG-243-F8
SHC-1076
SHC-1077
SHC-1078
SHC-1079
SHC-1080
SHC-1081
2.437 - 2.625
2.625 - 2.812
2.812 - 3.00
3.000 - 3.250
CG-262-F9
CG-281-F9
CG-300-F9
CG-325-F9
SHC-1092
SHC-1093
SHC-1094
N/A
.18 - .25
.25 - .37
.37 - .43
CG-25-F1-90
CG-37-F1-90
CG-43-F1-90
NHC-1009
NHC-1010 / NHC-1011
NHC-1012
.18 - .25
.25 - .37
.37 - .43
.43 - .50
.50 - .62
CG-25-F2-90
CG-37-F2-90
CG-43-F2-90
CG-50-F2-90
CG-62-F2-90
NHC-1021
NHC-1022
NHC-1023
NHC-1023
NHC-1024
.18 - .25
.25 - .37
.37 - .50
.50 - .62
.62 - .75
CG-25-F3-90
CG-37-F3-90
CG-50-F3-90
CG-62-F3-90
CG-75-F3-90
N/A
N/A
NHC-1035
NHC-1036
NHC-1037
.37 - .50
.50 - .62
.62 - .75
.75 - .87
.87 - 1.00
CG-50-F4-90
CG-62-F4-90
CG-75-F4-90
CG-87-F4-90
CG-100-F4-90
N/A
NHC-1040
NHC-1041
NHC-1042
NHC-1043
.75 - .87
.87 - 1.00
1.00 - 1.125
1.12 - 1.25
1.25 - 1.37
CG-87-F5-90
CG-100-F5-90
CG-112-F5-90
CG-125-F5-90
CG-137-F5-90
NHC-1050
NHC-1051
NHC-1052
NHC-1053
NHC-1054
.75 - .87
.87 - 1.00
1.00 - 1.125
1.125 - 1.25
CG-87-F6-90
CG-100-F6-90
CG-112-F6-90
CG-125-F6-90
N/A
N/A
NHC-1057
NHC-1058
P&S
Leviton
48
Cross Reference
Cable Range
CORD GRIP
1.25 - 1.37
1.37 - 1.43
49
Ericson Part #
Woodhead
Cooper Wiring
Hubbell/Kellems
CG-137-F6-90
CG-143-F6-90
NHC-1059
N/A
1.200 - 1.375
1.375 - 1.500
1.500 - 1.625
1.625 - 1.750
1.750 - 1.875
1.875 - 1.937
1.937 - 2.000
CG-137-F7-90
CG-150-F7-90
CG-162-F7-90
CG-175-F7-90
CG-187-F7-90
CG-193-F7-90
CG-200-F7-90
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.18 - .25
.25 - .37
.37 - .43
CG-25-F1-45
CG-37-F1-45
CG-43-F1-45
N/A
N/A
N/A
.18 - .25
.25 - .37
.37 - .43
.43 - .50
.50 -.62
CG-25-F2-45
CG-37-F2-45
CG-43-F2-45
CG-50F-2-45
CG-62-F2-45
VHC-1021
VHC-1022
VHC-1023
VHC-1023
VHC-1024
.18 - .25
.25 - .37
.37 - .50
.50 - .62
.62 - .75
CG-25-F3-45
CG-37-F3-45
CG-50-F3-45
CG-62-F3-45
CG-75-F3-45
N/A
N/A
VHC-1035
VHC-1036
VHC-1037
.37 - .50
.50 - .62
.62 - .75
.75 - .87
.87 - 1.00
CG-50-F4-45
CG-62-F4-45
CG-75-F4-45
CG-87-F4-45
CG-100-F4-45
N/A
N/A
VHC-1041
VHC-1042
VHC-1043
.75 - .87
.87 - 1.00
1.00 - 1.125
1.12 - 1.25
1.25 - 1.37
CG-87-F5-45
CG-100-F5-45
CG-112-F5-45
CG-125-F5-45
CG-137-F5-45
N/A
N/A
VHC-1052
VHC-1053
N/A
.75 - .87
.87 - 1.00
1.00 - 1.125
1.125 - 1.25
1.25 - 1.37
1.37 - 1.43
CG-87-F6-45
CG-100-F6-45
CG-112-F6-45
CG-125-F6-45
CG-137-F6-45
CG-143-F6-45
N/A
N/A
N/A
N/A
N/A
N/A
.18 - .25
.25 - .37
.37 - .43
CG-25-F1-F
CG-37-F1-F
CG-43-F1-F
FHC-1009
FHC-1010
N/A
.18 - .25
.25 - .37
.37 - .43
.43 - .50
.50 - .62
CG-25-F2-F
CG-37-F2-F
CG-43-F2-F
CG-50-F2-F
CG-62-F2-F
FHC-1021
FHC-1022
FHC-1023
FHC-1023
FHC-1024
.18 - .25
.25 - .37
.37 - .50
.50 - .62
.62 - .75
CG-25-F3-F
CG-37-F3-F
CG-50-F3-F
CG-62-F3-F
CG-75-F3-F
N/A
N/A
FHC-1033
FHC-1034
N/A
.37 - .50
.50 - .62
.62 - .75
.75 - .87
.87 - 1.00
CG-50-F4-F
CG-62-F4-F
CG-75-F4-F
CG-87-F4-F
CG-100-F4-F
N/A
N/A
N/A
FHC-1042
FHC-1043
.75 - .87
.87 - 1.00
1.00 - 1.125
CG-87-F5-F
CG-100-F5-F
CG-112-F5-F
N/A
N/A
N/A
P&S
Leviton
Notes
50

E-grip Catalog

Transcription

Similar documents

MANITOWOC - Precon Marine, Inc.