ultIMAtE lubEr - Smeertechniek

ULTIMATE LUBER™
Automatic Lubricator
The ULTIMATE LUBER™ is a powerful, motor-driven automatic
lubricator which is refillable using standard grease guns. Its
microprocessor controlled, energy efficient motor delivers
grease to a fixed displacement pump which produces pressures
up to 60 bar. This strength allows the ULTIMATE LUBER™ to
drive lubricant through long feed lines and to cycle progressive
distributors to feed several bearings consecutively. When a
dispensing cycle is selected, the units will activate at programmed
intervals. At each interval, the ULTIMATE LUBER™ dispenses
approximately 1.25cc of grease. Neither temperature nor altitude
will affect the lubricant output.
500cc
250cc
125cc
Features
• Most powerful lubricator on the market.
Produces up to 60 bar which enables
it to service single-point applications
up to 9m away and multi-point
applications up to 6m. away.
• Available with long-life replaceable
battery packs or optional external
power sources. (AC and DC)
• Available in 3 sizes:
(125, 250 or 500cc)
• Single or Multi-point configuration.
• Refillable using a standard grease gun.
• Able to service up to 12 lube points
with optional progressive distribution
block.
• Optional remote control available to
connect to customer equipment or
machinery. (eg. PLC, contactors,
relays)
• Suitable for indoor/outdoor use.
• Multiple settings from 15 days to 2
years to empty.
Temperature Range:
(-15ºC to +55ºC)
(NOTE: Low Temp lubricants must be
used at low temperatures)
Size: Model 500: 23 cm X 13 cm
•Optional easy to install mounting
plates for both single or multi-point
applications available.
Model 250: 20 cm X 10 cm
• Designed for the industrial workplace
.
Model 125: 20 cm X 8 cm
- dust proof
- weather-resistant
IN
W MADE
CANADA
Cairostraat 72-74
3047 BC Rotterdam
The Netherlands
T: +31 10 466 62 55
F: +31 10 466 66 55
[email protected]
www.smeertechniek.nl
TITAN CL LUBER™
Automatic Lubricator
The TITAN CL LUBER™ is a powerful, motor-driven automatic
lubricator which is built on the proven ULTIMATE LUBER™
technology. The TITAN CL LUBER™ is refillable by simply
replacing a standard grease cartridge. Its microprocessor
controlled, energy efficient motor delivers grease to a fixed
displacement pump which produces pressures up to 60 bar.
This strength allows the TITAN CL LUBER™ to drive lubricant
through long feed lines and to cycle progressive distributors to
feed several bearings consecutively. When a valid dispensing
cycle is selected, the units will activate at programmed intervals.
At each interval, the TITAN CL LUBER™ dispenses approximately
1.25cc of grease. Neither temperature nor altitude will affect the
lubricant output.
Features
• Most powerful lubricator on the market.
Produces up to 60 bar which enables it to
service single-point applications up to 9m
away and multi-point applications up
to 6m away
• Able to service up to 12 lube points with
optional progressive distribution block
• Available with long-life replaceable battery
packs or optional external power sources.
(AC and DC)
• Suitable for indoor/outdoor use
• Unit is mounted on an easy to install
mounting plate
• LED operation and warning indicators:
(1-red, 1-green, 1-blue)
• Optional Remote Control available
to connect to customer equipment or
machinery (eg: PLC, Contactors, Relays)
1 GREEN flash every 20 seconds
– normal operation
• Multiple settings to empty from 15 days to
2 years.
1 GREEN flash every second (approx.)
– unit is dispensing grease
• Single or Multi-Point configuration
1 RED flash every 20 seconds
– limit switch error (unit operating in failsafe (timed dispense) mode)
• Refillable using a standard grease cartridge
(no other tools needed)
2 RED flashes every 20 seconds
– Low Battery warning
1 BLUE flash every 20 seconds
– low grease level
(grease cartridge needs to be replaced)
2 BLUE flashes every 20 seconds
– unit is paused (remote control option)
4 BLUE flashes every 20 seconds
– Low Temperature, dispensing is paused
Temperature Range:
(-15ºC to 55ºC)
(NOTE: Low Temp lubricants must be
used at low temperatures)
Size: (62cm. h X 15cm. w X 20cm. d).
(62cm. h X 45cm. w X 20cm. d).
IN
W MADE
CANADA
Cairostraat 72-74
3047 BC Rotterdam
The Netherlands
T: +31 10 466 62 55
F: +31 10 466 66 55
[email protected]
www.smeertechniek.nl
TITAN OILER 2000
Automatic Lubricator
The TITAN OILER 2000 is a po werful, motor-driven
automatic lubricator which is built on the proven
U LT I M AT E L U B E R ™ t e c h n o l o g y. T h e T I TA N
OILER 2000 and its easily refillable, large capacity,
1400cc (47 fl.oz.) tank is perfect for most industrial oiler
applications where quality and reliability are needed. Its
microprocessor controlled, energy efficient motor
delivers oil to a fixed displacement pump which produces
pressures up to 135 bar . This strength allows the TITAN
OILER 2000 to drive oil through long feed lines and/or
through an oil distribution system to feed several
applications at the same time. When a valid dispensing
cycle is selected, the units will activate at programmed
i n t e r v a l s d e l i v e r i n g 2 c c ’s o f o i l p e r cy cl e . N e i t h e r
t em p e r a t u r e n o r a l t i t u d e w i l l a f f e c t the o utput.
Features
• Most powerful oiler on the market.
Produces up to 135 bar which
enables it to service single-point
applications and multi-point
applications at great distances.
• Available with long-life replaceable
battery packs or optional external
power sources. (AC and DC)
• Easily refillable, large capacity tank
(1400cc)
• Suitable for indoor/outdoor use.
• Easily mounted either stand-alone or
on an easy to install mounting plate.
• Optional remote control
available to connect to customer
supplied equipment or machinery.
(eg: PLC, contactors, relays)
• Built-in low level sensor;
optional low level contact output
for customer monitoring.
• Multiple settings to empty from
15 days to 2 years.
T: +31 10 466 62 55
F: +31 10 466 66 55
(-15ºC to + 55ºC)
(NOTE: Low Temp oils must be
used in low temperature applications)
Size: (30-1/2cm H x 13cm W x 19cm D)
• Built on proven technology by the
Market Leader,
ATS ELECTRO-LUBE.
Electro-Lubers have been used
worldwide since 1982.
• Designed for the toughest
operating environments.
Cairostraat 72-74
3047 BC Rotterdam
The Netherlands
Temperature Range:
[email protected]
www.smeertechniek.nl
IN
W MADE
CANADA
JACK LUBER
Automatic Lubricator with
Replaceable Cartridge
The JACK LUBER is the most versatile product in the ATS
product line. I t ’s b u i l t o n t h e p r o v e n ULTIMATE LUBER™
technology incorporating the JACKSCREW mechanism. Together,
you know it’s powerful! The JACK LUBER has a replaceable,
one-time use cartridge that changes out in seconds! The drive
unit for the JACK LUBER is pure ULTIMATE power and runs off
the ATS battery pack or with a direct AC/DC adaptor (optional).
Producing over 200 psi, the JACK LUBER is capable of heavy
duty applications running long lines; even through a 2 port
distribution block. The JACK LUBER is tough, reliable and easy to
work with. The JACK LUBER saves time, money and gives you the
performance you need and trust from ATS!
Features
• Self-Contained, stand-alone
automatic, single point lubricator.
• Industry standard 125 and 250cc size.
• Pressures over 14 bar.
• 1/2” NPT male grease output.
• UL/cUL Div. 2 Hazardous Area
approval pending.
• Optional remote control available to
connect to customer equipment or
machinery.
Temperature Range:
(-40ºC to + 60ºC)
• Replaceable, one-time use cartridge
filled with customer specified
lubricant.
• Designed for the industrial workplace
-dust proof
-weatherproof
(NOTE: Low Temp lubricants
must be used at low temperatures)
* Patent Pending
• Suitable for indoor/outdoor use.
Size: • Multiple settings to empty from
15 days to 2 years.
Jack Luber Model 125
7-1/2” high X 3-1/8” dia.
• May be remote mounted to 40’
(12m.) using 3/8” ID hose.
IN
W MADE
CANADA
Cairostraat 72-74
3047 BC Rotterdam
The Netherlands
T: +31 10 466 62 55
F: +31 10 466 66 55
[email protected]
www.smeertechniek.nl
Electro-Luber™
ORIGINAL Automatic Lubricator
The classic ELECTRO-LUBER™ was developed in 1982. The ELECTROLUBER™ uses an electro-chemical reactor cell which converts electrical
energy into safe, inert nitrogen gas. The gas is trapped in a hermetically
sealed bellows type gas chamber. ATS Electro-Lube was the first
company to use this self-contained automatic lubrication technology; as
the gas is produced an internal pressure builds up in the bellows and is
applied against the orange piston. The piston then forces the lubricant
out of the cylinder and into the point of lubrication. The unit can empty
between 15 days to 1 year depending on the setting of the simple userprogrammable DIP switch. The selection can be changed or turned off
at any time.
Jumbo-Luber
475cc
Budget-Luber
250cc
Mini-Luber
125cc
Micro-Luber
60cc
Features
• Self-Contained, stand-alone automatic,
single-point lubricator
• Continuous lubrication using safe,
inert, nitrogen gas. Continuous
lubrication of bearings removes and
protects foreign matter from entering,
slows oxidation, aids in dissipating
heat, and ensures a constant supply of
fresh lubricant.
• Available in 4 sizes:
(60, 125, 250 or 475cc)
• Pressures up to 3,4bar
• A p p r o v e d f o r a l l e x p l o s i v e
environments. Certified Intrinsically
Safe for Class 1, Groups A,B,C,D,E,F,G.
Also certified by MSHA and Energy,
Mines Canada for use in mining. ATEX
certified units also available.
• Suitable for indoor/outdoor use.
Temperature Range:
• Multiple settings to empty from 15
days to 1 year.
-40ºF to +132ºF (-40ºC to +55ºC)
• Millions of units used worldwide since
1982.
• May be remote mounted to 1m
• Optional remote control available to
connect to customer equipment or
machinery.
• Fi l l e d w i t h c u s t o m e r s p e c i f i e d
lubricant.
• Designed for the industrial workplace
(NOTE: Low Temp lubricants must be used
at low temperatures)
Size: Jumbo-Luber: 17,.1 cm X 12.1 cm
Budget-Luber: 15.5 cm X 10.0 cm
Mini-Luber: 14.3 cm X 8.0 cm
Micro-Luber: 12.4 cm X 8.0 cm
- dust proof
- waterproof to 7m
- weatherproof
IN
W MADE
CANADA
Cairostraat 72-74
3047 BC Rotterdam
The Netherlands
T: +31 10 466 62 55
F: +31 10 466 66 55
[email protected]
www.smeertechniek.nl
ATS ACCESSORIES
Legend
For Automatic Lubricator
A Mounting Plates (single & multi-port)
B Replacement battery packs (Ultimate /
Titan series)
Various high quality Accessories and Replacement parts
are available from the factory. These products are always
in stock and can be delivered quickly to your site.
C AC power supplies (Ultimate / Titan series)
D Mounting adapters/reducers
Be sure to use GENUINE ATS Electro-Lube Accessories
and Replacement Parts to ensure the quality performance
you have come to trust !
E Oil Brush
Contact ATS or our partners for further information or to
place your order.
H Oil Check Valves
J
F Mounting Brackets
G Weather Caps
I Hose & Fittings
C
J Distribution Block (2-12 Ports)
H
A
B
I
G
F
Cairostraat 72-74
3047 BC Rotterdam
The Netherlands
D
E
T: +31 10 466 62 55
F: +31 10 466 66 55
[email protected]
www.smeertechniek.nl
IN
W MADE
CANADA