new spare parts supplement

Transcription

new spare parts supplement
NEW PARTS 2009
NEW PARTS 2009
NEW
SPARE PARTS
SUPPLEMENT
2009
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N1
NEW PARTS 2009
NEW PARTS 2009
N2
AIR - AIR FILTERS
Part No
Description
AIR6930
Briggs & Stratton Air Filter
Fits: Late model 9 series (9 CID) horizontal shaft engines including
93302, 93312, 93332, 93352, 94002, 94032, 94052, 94302,
95302, 95312 models.
Length: 3” (76mm)
Width: 2” (50mm)
Height: 2” (50mm)
Replaces OEM: 790166
Standard Pack 1
AIR6913
Honda Pre-filter
Fits: GX610K1 18hp, GX620K2 20hp, GX670 24hp, GXV610K1 18hp,
GXV620K1 20hp, GXV670 24hp engine models.
Replaces OEM: 17218-ZJ1-840
Standard Pack 1
Use with our AIR6157 air filter.
AIR6915
Honda Pre-Filter
Fits: GX240, GX270, GX340, GX390 Models
Replacement pre-filter for our AIR3704
Replaces OEM: 17218-ZE3-000 / 17218-ZE3-505
Standard Pack 1
AIR6941
Honda Air Filter for Commercial Model Lawnmowers
Fits: GXV160K1, 5.5hp engines as air filter option 2 - (shorter type cartridge
filter) as fitted to HRC216K1 & HRC216K2 Commercial model
lawnmowers. Comes with pre-filter fitted.
Length: 6 3/4” (172 mm)
Width: 2 1/4” (57 mm)
Height: 2” (50 mm)
Replaces OEM: 17211-ZE7-W03
Standard Pack 1
****Please note: For non commercial machines fitted with GXV160 engines
use our AIR6575 air filter.****
AIR6970
Honda Foam Air Filter Element
Fits: GX160T1 engine models fitted with semi dry air filter systems as used on
some fire fighting pumps.
Also fitted to selected GX120, GX160 & GX200 copy engines.
Length: 5 3/8” (136 mm)
Width: 3 1/8” (79 mm)
Height: 1 1/4” (32 mm)
Replaces OEM: 17211-ZE1-000
Standard Pack 1
Use with our AIR6281 air filter oil spray.
AIR6917
Husqvarna Air Filter
Fits: 365, 371 model chainsaws.
Length: 3 5/8” (92mm)
Width: 2 7/8” (73mm)
Height: 1 5/8” (41mm)
Replaces OEM: 503 81 45-03
Standard Pack 1
AIR6978
Husqvarna / Partner Main Air Filter
Fits: K750 concrete saws.
Replaces OEM: 506 36 72-01 / 544 18 16-02
Standard Pack 1
AIR6980
Stihl Chainsaw Air Filter, flocked type.
Fits: 021, 023, 025, MS210, MS230, MS250 models.
Replaces OEM: 1123 120 1613
Standard Pack 1
Image
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
AIR6972
Stihl Chainsaw Air Filter, fleece type.
Fits: 029, 039, MS290, MS310, MS390 models.
Replaces OEM: 1127 120 1621
Standard Pack 1
AIR6974
Stihl Chainsaw Air Filter, flock type.
Fits: 034, 036 models.
Length: 3 1/4” (82mm)
Width: 11/16” (18mm)
Height: 2 7/8” (73mm)
Repaces OEM: 1125 120 1615 (back half) / 1125 120 1620 (front half)
Standard Pack 1
AIR6976
Stihl Chainsaw Air Filter, flock covered.
Fits: 050, 051, 075, 076 models.
Length: 5 1/8” (130mm)
Width: 4 3/8” (111mm)
Height: 5/16” (8mm)
Replaces OEM: 1111 120 1601
Standard Pack 1
AIR6924
Stihl Main Air Filter
Fits: TS700 & TS800 model concrete saws.
Length: 5 1/2” (140mm)
Width: 4 1/16” (104mm)
Height: 1 5/8” (41mm)
Replaces OEM: 4224 141 0300A
Standard Pack 1
Use with our AIR6927 Pre-filter.
AIR6927
Stihl Pre-filter
Fits: TS700 & TS800 model concrete saws.
Replaces OEM: 4224 140 1801
Standard Pack 1
Use with our AIR6924 main air filter.
AIR6894
Victa Primary Air Filter
Fits: V40 Lawnkeeper models as per Bunnings / chain store
type entry level Victa mowers.
Length: 5 1/8” (130mm)
O.D: 1 1/2” (38mm)
I.D: 3/4” (19mm)
Replaces OEM: AF07883A
Standard Pack 5
Image
NEW
NEW
NEW PARTS 2009
AIR - AIR FILTERS
NEW
NEW
NEW
NEW
AMC - AMC PARTS
Part No
Description
AMCF0069
AMC Small Type Clutch Cork
Fits: 240mm friction drive (small drive type outside pulley size) as used on
early model Explorer XL 13/33.
Actual cork size: O.D 178mm / I.D 80mm”
Genuine AMC Part Number: F0069
Standard Pack 1
Image
NEW
(For large type 305mm friction drives use our 237mm O.D clutch cork
AMCF0020)
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N3
NEW PARTS 2009
NEW PARTS 2009
BEA - BEARINGS
Part No
Description
BEA6937
Hustler Cutter Spindle Bearing 6305 / 2RS Double Seal
Fits: Upper & Lower positions on 36”, 42”, 44”, 48”, 52” & 54” cut models
including Mini FasTrak & FasTrak, FasTrak Super Duty, Mini Z.
Replaces Hustler OEM: 783555
Also Replaces OEM:
Encore 363146 / 363350
Ferris 1520828 / 1520828S
Gravely 012984
Great Dane D18045 / 200046
Jacobsen 552184
John Deere M77534
Scag 48101-01 / 48101-02
Snapper 1-9125 / 7-6510 / 7019125
I.D: 63/64” (25mm)
O.D: 2 7/16” (61.91mm)
Height: 21/32” (16.67mm)
Standard Pack 1 Bearing
Image
NEW
BEL- BELTS
Part No
Description
BEL20006
John Deere Transmission Drive Belt
Fits: L110, L118, L120, L130 42” & 48” cut models.
(1/2” Wide x 88 5/8” O.D)
Replaces OEM: GX20006
Standard Pack 1
BEL954-04033
MTD Yardman & Cub Cadet Cutter Deck Belt
Fits: MTD Yardman 46” cut 22hp selected models cutter deck belt.
Also fits Cub Cadet selected 46” Cut models including 22hp LT1022, LT1045,
LT1046 13AB11CH710, 13AP11CH630, cutter deck belt.
(1/2” Wide x 116 1/4” O.D)
Replaces OEM: 754-04033 / 954-04033
Standard Pack 1
BEL954-04060
MTD Yardman & Cub Cadet Cutter Deck Belt
Fits: MTD 42” cut 771G (Red) 2005 mdls cutter deck belt.
MTD 42” cut 771G (Black) 2006 mdls cutter deck belt.
MTD 42” cut 791G Hydro models cutter deck belt.
Yardman 13AX604G 20hp 42” cut manual PTO 2005 mdls cutter deck belt.
Cub Cadet 42” cut LT1042 2005 mdls cutter deck belt.
(1/2” Wide x 96 1/2” O.D)
Replaces OEM: 754-04060 / 954-04060 / 754-04060B / 954-04060B
Standard Pack 1
BEL954-04062
MTD & Cub Cadet Cutter Deck Belt. (1/2” Wide x 77 3/4” O.D)
Fits: Cub Cadet selected 38” cut 2005-2006 models.
Fits: MTD 38” cut 2005-2006 “F” deck models including 13.5hp model
13A1762F670, MTD LT13/A1762F,
MTD 762F & 771F up to 2006 models.
Replaces OEM: 754-04062 / 954-04062
Standard Pack 1
BEL954-04118
MTD Yardman & Cub Cadet Cutter Deck Belt
Fits: MTD Yardman 23hp 46” Cut Autodrive models cutter deck belt.
Cub Cadet selected 46” Cut models including I1046 20hp 17AF9BKKH630,
I1050, LT1045, LT1046, cutter deck belt.
(1/2” Wide x 122” O.D)
Replaces OEM: 754-04118 / 954-04118
Standard Pack 1
Image
NEW
NEW
NEW
NEW
NEW
EDGER BLADES
N4
Part No
Description
WMS14038
12” Commercial Edger Blade
Fits: MEY & Dwyer & Felton edgers.
Length: 12” (304mm)
Width: 2” (50mm)
Hole: 5/8” (15.875mm)
Standard Pack 1
Use with our BLH6942 blade washers & BLH6968
drive shaft.
Image
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
WMS14051
9 7/8” Edger Blade
Fits: Pionex domestic edgers etc.
Length: 9 7/8” (250mm)
Width: 1.574” (40mm)
Hole: 1/2” (12.7mm)
Standard Pack 1
WMS14052
9” Universal Edger Blade
Length: 9” (228mm)
Width: 1.574” (40mm)
Hole: 1/2” (12.7mm)
Standard Pack 1
Image
NEW
NEW
BLH - BLADE HOLDER PARTS
Part No
Description
BLH6899
John Deere 38”, 42” & 48” Cut Blade Bar Adaptor
2 required for 38” & 42” Cut / 3 required for 48” Cut.
Fits: 38” (965mm) cut decks using a 7 point star
mounting hole including X300 model ZTR’s
Fits 42” (1067mm) cut decks using a 7 point star
mounting hole including 102, 105, 115, 125, 135,
Z225 EZ Trak Residential ZTR, LA100, LA110,
LA120, X110, X120,
Length
Centre
Hole
Diam.
9 7/16”
239mm
7 Point
Star
Outside
Hole
Diam.
N/A
Centre to
Centre
N/A
Width
Steel
Thickness
2 1/2”
63mm
1/4”
6mm
NEW PARTS 2009
EDGER BLADES
From blade
mounting
hole to
mounting
hole.
NEW
Fits 48” (1220mm) Cut decks using a 7 point star
mounting hole including 145, 155C, LA130, LA140,
X140, Z245 EZ Trak Residential ZTR models.
For 38” Cut use with (2) BLS3653 Blade sets & (2)
BBN3722 bolt sets / or use (2) BRC5543 Blade &
Bolt Combo kits.
For 42” Cut use with (2) BLS3653 Blade sets & (2)
BBN3722 bolt sets / or use (2) BRC5543 Blade &
Bolt Combo kits.
For 48” Cut use with (3) BLS3653 Blade sets & (3)
BBN3722 bolt sets / or use (3) BRC5543 Blade &
Bolt Combo kits
Part No
Description
Image
BLH6942
MEY Blade Support Washer
Fits: MEY commercial edger models.
Washer dimensions: 102mm O.D x 16mm I.D
Standard Pack 1
BLH6968
MEY Edger Drive Shaft
Fits: MEY & Dwyer & Felton 12” commercial edger models.
Standard Pack 1
NEW
NEW
BLR - BLADE BAR CUTTING - RIDE ON & SLASHER
Part No
Description
BLR6906
3 blades required for 50” cut.
Cub Cadet Bar Blade
Fits: 50” cut Z Force ZTR models (with round
mounting hole), Steering wheel models GT-2550
13-2C7P630 22hp 2006 mdls & LT1024 1000 series
with Hydro transmission.
Replaces OEM: 759-04047 / 942-04068 / 74204068A / 1010168
17 7/8”
454mm
3 blades required for 60” cut.
Cub Cadet Standard Bar Blade
Fits: Cub Cadet Tank 60” (1523mm) cut ZTR’s
including 27hp, 2004 model 53AB5BDX150,
53AB5BDX750. Standard bar blade, stepped & high
fluted, right hand cut.
Replaces OEM: 1005338 / 01005338
21”
533mm
BLR6908
Length
Centre
Hole
Diam.
3/4”
19mm
Outside
Hole
Diam.
N/A
Centre to
Centre
N/A
Width
2 3/4”
70mm
NEW
3/4”
19mm
N/A
N/A
3”
76mm
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N5
NEW PARTS 2009
NEW PARTS 2009
BLR - BLADE BAR CUTTING - RIDE ON & SLASHER
Description
BLR6910
3 blades required for 60” cut.
21”
Cub Cadet Gator Mulcher Blade
533mm
Fits: Cub Cadet Tank 60” (1523mm) cut ZTR’s
including 27hp, 2004 models 53AB5BDX150,
53AB5BDX750. Gator mulcher blade, stepped & high
fluted, right hand cut.
Replaces OEM: 1005381 / 01005381
3/4”
19mm
18 1/8”
3 blades required for 50” cut.
Cub Cadet / MTD & Massey Ferguson
463mm
Gator Mulcher Blade
Fits: Cub Cadet RZT50 series tractors,
Fits: MTD 50” cut deep deck models 2004 onwards,
Fits: Massey Ferguson 50” cut ZTR models. Stepped
& Fluted, right hand cut. Replaces Cub Cadet / MTD
OEM: 742-04053A / 942-04053B
5/8”
3 blades required for 44” cut.
Dixon Standard Bar Blade
Fits: Dixon Ram 44, Ram 44 Mag &
Speed 44 ZTR models with 44” (1118mm) cut decks.
Flat & high fluted Fusion blade, right hand cut.
Replaces OEM: 13918
14 15/16”
45/64”
18mm
3 Blades required for 50” cut.
Dixon Gator Mulcher Blade
Fits: Ram 50, Ram 50 Mag & Kodiak 50, 2004 to
2006 ZTR models.
Flat & Fluted Gator Mulcher Blade, right hand cut.
Replaces OEM: 9444 / 6897
17”
432mm
BLR6925
BLR6912
BLR6836
BLR6939
BLR6918
BLR6920
BLR6922
BLR6890
BLR6893
N6
Centre
Hole
Diam.
Part No
Length
380mm
Outside
Hole
Diam.
N/A
Centre to
Centre
N/A
Width
3”
76mm
NEW
Star
Centre
Hole
N/A
N/A
2 1/2”
(64mm)
NEW
N/A
N/A
2 1/2”
64mm
NEW
45/64”
18mm
N/A
N/A
2 1/2”
64mm
NEW
3 blades required for 60” cut.
20 1/2” 5/8”
N/A
N/A
2 1/2”
Dixon, Exmark & Toro Standard Bar Blade
521mm 16mm
64mm
Flat & Fluted, Right Hand Cut
Fits: Toro Z500, Z528 Z Master models with 7-Gauge
side discharge deck & Z500, Z553, Z550, Z555,
Z557, Z558, Z560, Z580, Z580-D, Z587L, Z588E,
Z589, Z590-D, Z593-D, Z595-D, Z597-D, Z Master
models with Turbo Force side discharge deck.
Also fits selected Dixon 60” (1524mm) cut models
including 8025, ZTR560 (1993), ZTR5601 (1994 - 1996), ZTR6601 (1995 - 1996)
Also fits selected Exmark 60” (1524mm) cut models. For Gator Mulcher Blade option order our BLR6339
Replaces OEM: Dixon 18931 / 9383 / 12441 Toro 105-7718-03 / 105-7718 / 103-0301
Use (1) BLR6918 & (1) BLR6920 for 36” cut.
20 1/2” 5/8”
N/A
N/A
2 1/2”
Use (2) BLR6918 for 42” cut.
520mm 16mm
64mm
Hustler Standard Bar Blade
Flat & Fluted standard bar blade, right hand cut.
Fits: Hustler 36” (914mm) cut side discharge Mini
FasTrak 15/36, 927343 & 927376, Mini Z, FasTrak
Super Duty models. Fits: Hustler 42” (1067mm) cut
side discharge Mini FasTrak 17/42, 927350, Mini Z, FasTrak Super Duty models. Replaces OEM: 793794
Hustler Standard Bar Blade
13 3/4”
Use (1) BLR6920 & (1) BLR6918 for 36” cut.
349mm
Fits: Hustler 36” (914mm) cut side discharge Mini
FasTrack 15/36, 927343 & 927376, Mini Z, FasTrak
Super Duty models. Flat & Fluted standard bar blade,
right hand cut. Replaces OEM: 793802
5/8”
16mm
3 Blades required for 60” cut.
Hustler Standard Bar Blade
Fits: 60” cut Hustler Z, Hustler ATZ 927178 & 927186,
Super Z & Short Cut models.
Replaces OEM: 782516
20 61/64”
5/8”
16mm
3 Blades required for 72” cut models.
John Deere Gator Mulcher Blade
Fits: John Deere 72” (1828mm) cut 1400 & 1500
series 7 Iron Decks, Mid Mount Z Trak, Z830A
Professional Z Trak, Z850A Professional Z Trak
models.Stepped & Fluted Gator Mulcher Blade, right
hand cut. Replaces OEM: TCU15882
25”
635mm
3 Blades required for 72” cut.
Kubota Bar Blade
Fits: RCK72P-28Z 72” Pro Decks as fitted to ZD28,
ZD326, ZD331 ZTR models.
Stepped & Fluted Right hand cut blade.
Replaces OEM: K5677-34340
24 1/2”
622mm
532mm
N/A
N/A
NEW
NEW
2 1/2”
64mm
NEW
N/A
N/A
2 1/2”
64mm
NEW
29/32”
23mm
N/A
N/A
2 ½”
64mm
NEW
1 1/8”
29mm
N/A
N/A
2 1/2”
64mm
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
BLR6902
2 blades required for 38” cut.
John Deere Standard Bar blade
Fits: X300 models ZTR’s
Replaces OEM: M153118
Length
Centre
Hole
Diam.
19 1/2”
495mm
7 Point
Star
Outside
Hole
Diam.
N/A
Centre to
Centre
N/A
Width
3”
76mm
NEW
BRF - AIR FILTERS
Part No
Description
Image
BRF6897
Echo Flock Covered Air Filter
Fits: PAS2400, PB24LN, PAS2601, PE260, SRM2400, SRM2601, SRM2605,
SRM3100, ES231, HCA2400, HCA261, LST2400 models.
Length: 3 1/16” (78mm) / Width: 3 7/64” (79mm) / Height: 5/16” (8mm)
Replaces OEM: 130-310-51830
Standard Pack 1
NEW PARTS 2009
BLR - BLADE BAR CUTTING - RIDE ON & SLASHER
NEW
BRG - BRUSHCUTTER SAFETY GEAR
Part No
Description
BRG6888
One piece banded ear plugs 19db reduction, lightweight & washable.
Comfortable easy fit behind neck or under chin & can be worn with safety
glasses. Suitable for light industrial use, handyman, garden equipment
& mid level noise. Australian Standard certified product, hearing protector
class 3 tested to AS/NZS1270.
Standard Pack 1
BRG6901
Shin / Knee Guards
Comfortable & lightweight ideal for use with brushcutters etc.
Features quick release straps, padded lining & high impact plastic outer.
Standard Pack 1
Image
NEW
NEW
BRN - UNIVERSAL BUMP FEED / TAP & GO HEADS
Part No
Description
BRN6839
Speed - Feed 375 Premium Quality Nylon Head
Fits most straight shaft brushcutters & comes clampacked for retail display sales
Features include • Loads in 30 seconds
• Rugged semi-matic head for medium to heavy-duty applications
• Inner wall reduces amount of dirt inside head
• Large, durable eyelets enhance line life
• Line tensioning system with split spool reduces head vibration
• Holds 10 feet of .095” line
• We recommend using Trail Blazer & Diamond Edge Premium Quality Trimmer Line
Head includes the following arbors & studs
M10 x 1.25 LH / M10 x 1.00 LH / M8 x 1.25 LH
Stud 8mm LH x 10mm / Stud 7mm LH x 10mm
Made in USA. Standard Pack 1
BRN6923
Speed - Feed 450 Premium Quality Nylon Head
Fits most straight shaft brushcutters & comes clampacked for retail display sales
Features include • Loads in 30 seconds
• Rugged semi-matic head for medium to heavy-duty applications
• Inner wall reduces amount of dirt inside head
• Large, durable eyelets enhance line life
• Line tensioning system with split spool reduces head vibration
• Holds 10 feet of .095” line
• We recommend using Trail Blazer & Diamond Edge Premium Quality Trimmer Line
Head includes the following arbors & studs
M10 x 1.25 LH / M10 x 1.00 LH / M8 x 1.25 LH
Stud 8mm LH x 10mm / Stud 7mm LH x 10mm
Made in USA. Standard Pack 1
Image
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N7
NEW PARTS 2009
NEW PARTS 2009
BRT - TRAIL BLAZER TRIMMER LINE
Part No
Description
BRT6889
Trail Blazer Super Strength Trimmer Line (Green)
.120 / 3.00mm thick / 17” Cut Length / 1kg bundle.
Standard Pack 1 Bundle
(Box Quantity 16 Bundles)
BRT6892
Trail Blazer, Super Strength Trimmer Line (Green)
.120” / 3.00 mm thick / 22” Cut Length (1kg) bundle.
Standard Pack 1 Bundle
(Box Quantity 16 Bundles)
BRT6943
Trail Blazer Super Strength Trimmer Line (Green)
.120” / 3.00mm thick / 26 metres - 225g (1/2lb) Donut
Standard Pack 1 Donut
(Box Quantity 12)
BRT6945
Trail Blazer Super Strength Trimmer Line (Green)
.120” / 3.00mm thick / 53m - 450g (1lb) Donut
Standard Pack 1 Donut
(Box Quantity 12)
BRT6947
Trail Blazer Super Strength Trimmer Line (Green)
.120” / 3.00mm thick / 160m - 1.35kg (3lb) Spool
Standard Pack 1 Spool
(Box Quantity 9)
BRT6949
Trail Blazer Super Strength Trimmer Line (Green)
.120” / 3.00mm thick / 268m - 2.25kg (5lb) Spool
Standard Pack 1 Spool
(Box Quantity 9)
Image
NEW
NEW
NEW
NEW
NEW
NEW
Refer to pages 603 - 605 of our
2009 - 2010 Master Catalogue for another
38 Trail Blazer part number options.
N8
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
BRT6951
Vortex Super Quiet Trimmerline (Black twisted trimmerline)
70 metres (230 ft) x 2.4mm (0.95”)
500 Gram Donut.
Standard Pack 1 Donut.
(Box Qty 12)
BRT6953
Vortex Super Quiet Trimmerline (Black twisted trimmerline)
56 metres (185 ft) x 2.7mm (.105”)
500 Gram Donut.
Standard Pack 1 Donut.
(Box Qty 12)
BRT6955
Vortex Super Quiet Trimmerline (Black twisted trimmerline)
36 metres (120 ft) x 3.3mm (.130”)
500 Gram Donut.
Standard Pack 1 Donut.
(Box Qty 12)
BRT6957
Vortex Super Quiet Trimmerline (Black twisted trimmerline)
167 metres (550 ft) x 2.7mm (.105”)
1.5kg (3 lbs) Spool.
Standard Pack 1 Spool.
(Box Qty 9)
Image
NEW
NEW PARTS 2009
BRT - VORTEX TRIMMER LINE
NEW
NEW
NEW
Refer to page 606 of our 2009 - 2010 Master Catalogue for
another 9 Vortex part number options.
CAC - CABLES
Part No
Description
CAC6883
30 Metre bulk roll of plastic coated outer throttle cable.
Multi fit including Rover, early Victa four stroke, Masport etc.
Standard Pack 1
Use with our CAC491 inner wire.
Image
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N9
NEW PARTS 2009
NEW PARTS 2009
CAS - CARBURETTOR KITS & FUEL PARTS
Part No
Description
CAS6896
Two Stroke Primer Bulb Assortment Kit
Contains 27 pieces of the most popular two
stroke primer bulbs, comes packaged in a see
through impact resistant reusable plastic box.
Kit consists of:
Walbro: 188-13 x 5 Qty (Our OMK188-13)
Walbro: 188-11 x 5 Qty (Our OMK188-11-1)
Walbro: 188-12 x 5 Qty (Our CAS5484)
Walbro: 188-512 x 3 Qty (Our CAS5652)
Walbro: 188-506 x 1 Qty (Our OMK188-506)
Walbro: 188-508 x 1 Qty
Walbro: 188-509 x 1 Qty (Our OMK188-509)
Walbro: 188-511 x 1 Qty
Zama: 0057004 / 0057003 x 5 Qty (Our CAS5485)
Standard Pack 1 Kit
OMKGND-65
Genuine Zama GND-65 Diaphragm & Gasket Set
Fits: C3/C3A/M, C3-EL17,A-B, C3-EL18,A-B, C3-EL32 model carburettors
as fitted to Husqvarna 346XP, 346XPT, 351, 353, 340, 345, 350, P901
chainsaws.
Replaces OEM: Zama GND-65
Husqvarna 537 38 03-01
Standard Pack 1
OMKGND-71
Genuine Zama GND-71 Diaphragm & Gasket Set
Fits: C1M-EL28,A model carburettors fitted to Husqvarna 575XP chainsaws.
Zama OEM: GND-71
Replaces Husqvarna OEM: 537 38 56-01
Standard Pack 1
OMKK10-RWJ
Genuine Walbro K10-RWJ Repair Kit
Fits: RWJ-2 carburettor models as fitted to Husqvarna K960 model concrete saws.
Walbro OEM: K10-RWJ
Replaces Husqvarna OEM: 502 44 59-01
Standard Pack 1
OMKK10-WTE
Genuine Walbro K10-WTE Repair Kit
Fits: WTE-1A, WTE-2A, WTE-4A carburettor models as fitted to Stihl MS240 & MS260 model chainsaws.
Walbro OEM: K10-WTE
Replaces Stihl OEM: 1121 007 1063
Standard Pack 1
Image
NEW
NEW
NEW
NEW
NEW
CAM - CARBURETTOR PARTS
N10
Part No
Description
CAM6971
Honda Carburettor Assembly
Fits: GX200, 6.5hp engine models.
Replaces OEM: 16100-ZL0-W51
Standard Pack 1
CAM6973
Honda Carburettor Assembly
Fits: GX390K1 & GX390U1 13hp engine models.
Replaces OEM: 16100-ZF6-V01
Standard Pack 1
Image
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
CAM6900
Four Stroke Primer Bulb Assortment Kit
Contains 50 pieces of the most popular four stroke primer bulbs, comes
packaged in a see through impact resistant reusable plastic box.
Kit Consists of:
Briggs & Stratton:
494408 / 694394 x 10 Qty
(Our CAM5765)
Briggs & Stratton:
496115 / 694395 x 10 Qty
(Our CAM6082)
Tecumseh: 632047 x 10 Qty
Tecumseh: 36045 x 10 Qty
(Our CAM5915)
Tecumseh: 632694A x 10 Qty
(Our CAM6142)
Standard Pack 1 Kit
Image
NEW
NEW PARTS 2009
CAM - CARBURETTOR PARTS
CBB - COMPOSITE BLADE CARRIERS
Part No
Description
CBB6962
Multi Fit Composite Carrier Bar
Fits: Selected Ferris 61” cut decks.
Selected Great Dane 61” cut decks.
Selected Ransomes 61” cut decks.
Selected Scag 61” cut decks.
Overall carrier bar length: 13 1/16” (332mm)
Note: without blades fitted.
Centre of blade mounting hole to blade mounting hole: 11 3/4” (298mm)
Centre Hole: 5/8” (16mm)
Width: 2 9/16” (65mm)
Thickness: 7/32” (5mm)
Use with our CBB3715 Blade sets & BBN3722 Bolt sets.
Or Blade & Bolt Combo Options 1 Pair = BNC6090 or 30 Pair order BRC6475.
Image
NEW
CHD - CHASSIS & HANDLE PARTS
Part No
Description
CHD6954
Cox Clutch Cone kit including pin & washers.
Fits: Compact Tractors: 1983-1990 O9F3, O9B6, O9J6, O9M7, O9BO,
O9D1, O9J1.
Economy : 1998 4398H, CR431, CR434, CR434R. Economy A10807M
C1332U-13hp 32” cut, A10808M C1532U-15.5hp 32” cut,
A10907M C1532HU-13hp 32” cut models.
New Generation: 1998 5398A CR531, CR532, CR533, CR534, CR535,
CR536 13hp, 16hp, 18hp models.
Orion XL & Professional: 1991 to 1993 models.
Scout 1987 - 1993 20L7 models.
Stockman:
1993 - 1994 2513, 25E94, 25K94, 12.5hp, 14hp,15hp models.
1993 - 1994 23K94, 23H3, 23E94 16hp models.
1994 - 1995 0913, 09E94, 09K94, 25H94 12hp models.
1995 - 1996 25C95, 25K95 12.5hp, 15hp, 16hp models.
1995 - 1997 O7A95 5hp.
1995 - 1998 2013, 20C95, 20195, 42F95 8.5hp & 10.5hp .
1995 - 1998 09C95, 43H95 10.5hp & 12hp.
1995 - 1998 23C95 16hp.
Supanova: 1990 - 1993 2300 models.
Replaces Cox OEM: SKIT187 / KIT187 / CC2095GX
Standard Pack 1
Image
NEW
Please note: When installing a new Cox drive cone please insure the drive
plate surfaces are in good condition with no grooves. It is necessary to
deglaze the drive plate surface so the new cone will not slip generating
excessive heat & damaging the drive cone. As the new cones can no longer
contain asbestos over heating will cause premature failure. A quick way to
deglaze the drive plates is to use a 4” disc sander with medium grit paper.
This can also be done quickly at each service to reduce drive failure.
It is only necessary to take the shine off the surface to give the cone a surface
to grip to. Any grooves will need to be machined in a lathe.
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N11
NEW PARTS 2009
NEW PARTS 2009
CHD - CHASSIS & HANDLE PARTS
Part No
Description
CHD6960
Genuine Cox, Plastic Deck Roller
Fits: Compact Tractors: 1983 - 1990 09B6, 09F3, 09J6, 09M7 models.
1990 - 1993 09B0, 09D1, 09G0, 09J1 models.
Economy Models: 1998 CR431, CR434, CR434R, 4398 models.
New Generation: 1998 5398A, CR531, CR532, CR533, CR534, CR535,
CR536, 13hp, 16hp, 18hp models.
Orion XL & Orion Professional: 1991 - 1993 models.
Rear Engine Ride Ons: 1981 - 1989 7000C, 07A4, 07E6, 07H4 models.
Scout XL: 1987 - 1993 20L7 models.
Stockman: 1993 - 1994 2513, 25E94, 25K94, 12.5hp, 14hp, 15hp models.
1993 - 1994 23H3, 23E94, 23K94, 16hp models.
1993 - 1994 25E94, 25K94, 2513, 12.5hp, 14hp, 15hp models.
1994 - 1995 0913, 09E94, 09K94, 25H94 models.
1995 - 1996 25C95, 25K95, 12.5hp, 15hp, 16hp models.
1995 - 1997 07A95 5hp models.
1995 - 1998 23C95 16hp models.
1995 - 1998 2013, 8.5hp, 10.5hp models.
1995 - 1998 09C95, 43H95, 10.5hp, 12hp models.
1996 - 1998 25K96 13hp, 16hp models.
Supanova 1990 - 1993 2300 models.
Replaces OEM: AM036D9
Standard Pack 1
Image
NEW
Please note: For a solid nylon co-polymer deck roller use our CHD6103
non genuine Cox deck roller.
CHD6998
Cox Chain Tension Spring (also used as bonnet spring on selected models).
Fits: Compact Tractors: 1990-1993 09B0, 09G0, 09D1, 09J1 models.
Orion XL & Orion XL Professional: November 1991-1993 25J1 models.
Stockman: 1993-1994 12.5hp, 14hp & 15hp 2513, 25E94, 25K94 models.
1993-1994 16HP 23K94, 23H3, 23E94 models.
1994-1995 0913, 09E94, 09K94 models.
1994-1995 12HP 25H94 models.
1995-1998 10.5HP & 12HP 09C95 models.
Supanova: July 1990 - May 1993 2300 models.
Replaces OEM: AM180
Standard Pack 1
NEW
CLL - ELECTRIC CLUTCHES
Part No
Description
CLL5691
Electric PTO Clutch assembly (Manufactured by an OEM supplier.)
Fits: 2006 19hp Cub Cadet LT1042 13AX11CG630, 2006 16HP MTD
Yardman 13AV604G671 models.
Pulley Diameter: 6”
I.D: 1” (25mm)
Uses 5/8” belt (“B” or 69 Series Belt)
Replaces MTD & Cub Cadet OEM: 717-04163 & 917-04163
Warner OEM: 5217-32 & 5217-43
Operates in a counterclockwise direction.
Standard Pack 1
Image
NEW
ECP - ELECTRICAL COILS & PARTS
N12
Part No
Description
ECP6904
Briggs & Stratton Ignition Coil / Armature
Fits: Intek V-Twin 18hp through to 22hp engines including 4025A7, 4035A7,
4045A7, 404577, 405577, 405777, 40577A, 406577, 406677, 406777,
407577, 4075A7, 407677, 407777, 40F777, 40G777, 40H777, 445677,
445777, 446777, 543477 series.
Replaces OEM: 691060
Standard Pack 1
ECP6919
Kohler & John Deere Voltage Regulator
Fits: Kohler 8hp - 24hp engines with 15 amp alternators including
M8-M20, MV16-MV20, CH5, CH6, CH11-CH15 & CV11-CV15
In line terminals 3 in a row.
Replaces OEM: Kohler 25-755-03 / 41-403-06 / 41-403-09
John Deere AM34738 / AM106357
Standard Pack 1
Image
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
FPL6898
Tygon Fuel & Primer Line (Yellow) 1/4” (6.35mm)
I.D x 3/8” (9.52mm) O.D x 50ft (15.24 Metre) Roll.
Standard Pack 1 Roll
Image
NEW
Tygon fuel lines are manufactured using a special formulation which maintains
an air tight seal even in extreme temperatures.
Tygon resists swelling or hardening & it’s translucent material allows for easy
inspection of flow. Tygon will not harden, crack or swell.
FPL6950
Tygon Fuel & Primer Line (Yellow)
1/4” (6.35mm) I.D x 3/8” (9.52mm) O.D x 10ft (3 Metre) Roll.
1/16” (1.58mm) Wall Thickness.
Standard Pack 1 Roll
NEW
NEW PARTS 2009
FPL - FUEL & PRIMMER LINE PARTS
Tygon fuel lines are manufactured using a special formulation which maintains
an air tight seal even in extreme temperatures.
Tygon resists swelling or hardening & it’s translusent material allows for easy
inspection of flow. Tygon will not harden, crack or swell.
FUE - FUEL CONTAINERS & PARTS HEADING
Part No
Description
FUE6770
Scepter large Flow n’ Go fuel syphon pump.
Ideal for Lawntractors, Boats, Jet Ski’s, Motorbikes, farm equipment etc.
No lifting, No spills, No overfills.
2 Gallons / 7.5 Litres per minute.
Fits all branded plastic petrol cans.
Features: Safety shut off valve - Design completely
seals internal gas pressure & vapours when closed &
self vents when opened.
Patented gas pump - At the handle pump control allows
for auto shut off & restart as well as clean hassle free
siphon control, child safety lock included.
Pumps gas upwards for easy, clean fill ups in hard to
reach places.
Standard Pack 1
Image
NEW
GSL - GASKETS LOOSE
Part No
Description
Image
GSL6905
Briggs & Stratton Rocker Cover Gasket
Fits selected 21 & 28 CID overhead valve engines including 21B706, 21B707,
21B977, 287707, 287776, 287777, 28N707,
28N777, 28P777, 28Q777, 28S707, 28S777 model engines.
Replaces OEM: 272475S / 272475
GSL6984
Honda Carburettor Insulator Gasket
Fits: GX160 5.5hp & GX200 6.5hp engine models.
Replaces OEM: 16212-ZH8-800
Standard Pack 10
GSL6982
Honda Carburettor Insulator Gasket
Fits: GX240 8hp & GX270 9hp, GX360K1 13hp engine models also fits
EB3000X, EG3000X, HT3813K1, HT4213 models.
Replaces OEM: 16223-ZA0-800 / 16223-ZA0-700
Standard Pack 10
GSL6986
Honda Carburettor Insulator Gasket
Fits: GX340 11hp engine models.
Replaces OEM: 16223-ZE3-800 / 16223-ZE3-000 / 16223-ZE3-306
Standard Pack 10
NEW
NEW
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N13
NEW PARTS 2009
NEW PARTS 2009
GSL - GASKETS LOOSE
Part No
Description
KAW11061-2121
Genuine Kawasaki Carburettor Gasket
Fits: TK 420-23 C6J4 carburettors with the priming pump fitted to the side of
the carburettor as fitted to Kawasaki TJ027D engines on KBL27A & KBH27A
brushcutter models.
Genuine Kawasaki OEM: 11061-2121
Standard Pack 1
KAW110612122
Genuine Kawasaki Carburettor Gasket
Fits: TK 420-23 C6J4 carburettors with the priming pump fitted to the side of
the carburettor as fitted to Kawasaki TJ027D engines on KBL27A & KBH27A
brushcutter models.
Genuine Kawasaki OEM: 11061-2122
Standard Pack 1
KAW430282092
Genuine Kawasaki Diaphragm (primer bulb side)
Fits: TK 420-23 C6J4 carburettors with the priming pump fitted to the side of
the carburettor as fitted to Kawasaki TJ027D engines on KBL27A & KBH27A
brushcutter models.
Genuine Kawasaki OEM: 43028-2092
Standard Pack 1
KAW430282093
Genuine Kawasaki Diaphragm (metering lever bottom diaphragm)
Fits: TK 420-23 C6J4 carburettors with the priming pump fitted to the side of
the carburettor as fitted to Kawasaki TJ027D engines on KBL27A & KBH27A
brushcutter models.
Genuine Kawasaki OEM: 43028-2093
Standard Pack 1
Image
NEW
NEW
NEW
NEW
MUF - MUFFLERS
N14
Part No
Description
MUF6911
Honda Muffler with Heat Shield
Fits: GX240, GX270, GX340, GX390 engine models.
Replaces OEM: 18310-ZE2-W61 (Muffler) & 18320-ZE2-W61 (Heat Shield)
Standard Pack 1
MUF6992
ZTR Muffler
Fits: Kawasaki FH601V-DS01S (Our engine part # ENG6863) &
FH601V-AS26 (our engine part # ENG6834) 19hp vertical shaft engines.
Kawasaki FH641V-S05-S (our engine part # ENG6958) 21hp vertical shaft engine,
Kawasaki FH680V-AS28 (our engine part # ENG6533) 23hp vertical shaft engine,
Kawasaki FH721V-AS25 (our engine part # ENG6451), FH721V-BS01
(our engine part # ENG6354) & FH721V-AS24 (our engine part # ENG6355)
25hp vertical shaft engines.
Standard Pack 1
MUF6994
ZTR Muffler
Fits: Kawasaki FX850V-AS00 31hp Vertical Shaft Engines
(Our engine part # ENG6830).
Standard Pack 1
Image
NEW
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
MUF6996
ZTR Muffler
Fits: Kawasaki FX1000-AS00 37hp Vertical Shaft Engines
(Our engine part # ENG6824)
Standard Pack 1
Image
NEW
OIP - OIL PLUGS & FILTERS
Part No
Description
OIP6916
Honda Oil Filter
Fits: GX610 (1) 18hp, GX610 (2), GX620 (1), GX620 (2), GX620 (3) 20hp,
GXV610 18hp engine models.
Replaces OEM:
Honda 15400-PR3-004 & 15400-ZJ1-004
John Deere AM101378
Kubota 7000-15241
Standard Pack 1
NEW PARTS 2009
MUF - MUFFLERS
Image
NEW
PTC - PETROL TAPS, TANK CAPS & ACCESSORIES
Part No
Description
PTC6952
Honda Fuel Cap
Fits: GXV120, GXV160, GXV270K1, GXV340K1, GXV340K2, GXV390,
HP400, HP450, HR194, HR214, HRA216, HRC216, HRU194, HRU214.
Replaces OEM: 17620-ZE7-000
Standard Pack 1
Image
NEW
PUL - PULLEYS
Part No
Description
PUL6993
Cox Cutter Shaft Pulley
Fits:
Compact Tractors: 1983-1990 09F3, 09B6, 09J6, 09M7 models.
Compact Tractors: 1990-1993, 09B0, 09G0, 09D1, 09J1 models.
Economy model: 1998 4398H, CR431, CR434, CR434R models.
Orion XL & Orion XL Professional: November 1991-1993 models.
Scout XL: February 1987-1993 20L7 models.
Stockman: 1993-1994 12.5HP, 14HP & 15HP, 16HP 23K94, 23H3, 23E94,
2513, 25E94, 25K94 models.
Stockman: 1994-1995 12HP 0913, 09E94, 09K94, 25H94 models.
Stockman: 1995-1996 12.5HP 15HP & 16HP, 25C95, 25K95 models.
Stockman: 1995-1997 5HP 07A95 models.
Stockman: 1995-1998 8.5HP & 10.5HP, 12HP & 16HP 09C95, 2013, 20C95,
20195, 23C95, 42F95, 43H95 models.
Stockman: 1996-1998 13HP & 16HP 25K96 models.
Supanova: July 1990 - May 1993 2300 models.
Replaces OEM: AM030 Standard Pack 1
PUL6995
Cox Upper Clutch Pulley
Fits: Compact Tractors: 1983-1990 09F3, 09B6, 09J6, 09M7 models.
1990-1993 09B0, 09G0, 09D1, 09J1 models.
Orion XL & Orion XL Professional: November 1991-1993 models.
Stockman: 1993-1994 12.5HP 14HP & 15HP, 2513
Replaces OEM: AM158
Standard Pack 1
PUL6997
Cox Lower Clutch Pulley
Fits: Compact Tractors: 1978-1983 928 Series 2
Compact Tractors: 1983-1990 09F3, 09B6, 09J6, 09M7.
Compact Tractors: 1990-1993 09B0, 09G0, 09D1, 09J1.
Stockman: 1994-1995 12HP 25H94.
Stockman: 1995-1998 10.5HP & 12HP 09C95
Replaces OEM: AM205
Standard Pack 1
Image
NEW
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N15
NEW PARTS 2009
NEW PARTS 2009
SGN - SAFETY SIGNS
Part No
Description
SGN6932
“Caution Mower Operating Keep Clear” Warning Sign
This sign is made from strong plastic injection moulding with a coreflute
sign insert & features two metal spikes which push into the ground.
Height: 27 9/16” (700mm)
Width: 18 7/8” (480mm)
Standard Pack 1
SGN6934
“Tree Felling In Progress” Warning Sign
This sign is made from strong plastic injection moulding with a coreflute sign
insert & features two metal spikes which push into the ground.
Height: 27 9/16” (700mm)
Width: 18 7/8” (480mm)
Standard Pack 1
SGN6936
“Caution Keep Clear Herbicide Application In Progress” Warning Sign
This sign is made from strong plastic injection moulding with a coreflute sign
insert & features two metal spikes which push into the ground.
Height: 27 9/16” (700mm)
Width: 18 7/8” (480mm)
Standard Pack 1
Image
NEW
NEW
NEW
STR - STARTER PARTS
N16
Part No
Description
STR6956
Briggs & Stratton Starter Motor
For steel ring gear models only, metal coating over plastic 14 tooth gear.
Fits: 286702, 286707, 28B702, 28B705, 28B706, 28B707, 28D702, 28D707,
28M706, 28M707, 28N707, 28N777,
28P777, 28Q777 models.
3 5/8” Housing Length, for steel ring gear models only.
Replaces OEM: 693551
Standard Pack 1
STR6987
Briggs & Stratton starter drive kit comes complete with a 19.6mm tall plastic
starter gear & a roll pin type retainer.
Fits selected starter motors as used on 260772, 260777, 261772, 261776,
261777 engine models.
Replaces OEM: 491836
Standard Pack 1
STR6983
Briggs & Stratton starter pawls to suit our STR6527 rewind pulley & spring.
Fits: late model Sprint 375 model 98902 after code 97092800 & Sprint LX40
model 10C902 after code 97060500,
Classic 35 model 9D902 & 98982.
Replaces OEM: 281505S / 281505
Standard Pack 2
Image
NEW
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
Image
STR6977
Honda Starter Rewind Spring
Fits: GCV520, GCV530, GX240K1, GX270, T, U, UT, GX340K1, U1,
GX390K1, T1, U1, UT1, GX610, K1, U1, GX620, K1, U1, GX670, GXV270K1,
GXV340K1, K2, T2, UT2, GXV390, K1, T1, UT1, GXV520,U, GXV530, U,
GXV610, K1, U1, GXV620, K1, U1 engine models.
Replaces OEM: 28442-ZE2-W01
Standard Pack 1
Replacement starter spring for our recoil starter assemblies STR6907,
STR6204H, STR6204.
STR6907
Honda Starter Rewind Assembly
Fits: GX240 8hp, GX270 9hp engine models.
Replaces OEM: 28400-ZE2-W01ZA
Standard Pack 1
STR6909
Honda Starter Motor
Fits: GX340 11hp, GX390 13hp engine models & EM4500SX, EP5500CXS
generators.
Replaces OEM: 31210-ZE3-013 / 31210-ZE3-003
Standard Pack 1
STR6914
Honda Starter Motor
Fits: GX610K1 18hp, GX620K1 20hp, GX670 24hp engine models.
Replaces OEM: 31200-ZJ1-841 / 31200-ZJ1-842
Standard Pack 1
STR6921
Kohler Starter Motor
Fits: CH11, 12.5, 13, 14, 15 & CV15 models.
Rear terminal, 13 tooth gear.
Replaces OEM: 12-098-19 / 12-098-12 / 12-098-12S /
12-098-21S / 12-098-14S
Standard Pack 1
STR6981
Stihl Starter Handle with elastic / rubber insert & 3.5mm starter rope.
Fits: 029, 034, 036, 039, 044, 046, MS290, MS310, MS340, MS341, MS360,
MS361, MS440, MS441, MS460 model chainsaws.
TS400 model concrete saws.
FS160, FS220, FS280 model brushcutters.
Replaces OEM: 1128 190 3400
Standard Pack 1
STR6979
Stihl Starter Handle with elastic / rubber insert & 4.5mm starter rope.
Fits 038, 050, 051, 064, 066, 076, 084, 088, MS380, MS381, MS640, MS650,
MS660, MS880 chainsaw models.
Replaces OEM: 1122 190 3400
Standard Pack 1
STR6985
Stihl Starter Pawl Spring (double pawl type) fits:
Chainsaws: selected 039, 034, 036, 044, 046, MS170, MS180,
MS181,MS192, MS210, MS211, MS230, MS250,
MS270, MS290, MS310, MS340, MS341, MS360, MS361, MS440, MS441,
MS460 chainsaw models fitted with two starter pawls.
Also fits: Blowers: BG56, BG66, BG86 models.
Blower Vacs: SH56 models
Backpack Blowers: BR500, BR550 models.
Hedge Trimmer: HS81R models.
Replaces OEM: 1128 195 3500
Standard Pack 1
NEW
NEW PARTS 2009
STR - STARTER PARTS
NEW
NEW
NEW
NEW
NEW
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N17
NEW PARTS 2009
NEW PARTS 2009
SWT - SWITCHES
Part No
Description
SWT6926
Safety Switch / Plunger Interlock Switch single post, right angle terminals,
snap mounted. Normally open.
Fits: Selected Ariens, MTD, Great Dane, John Deere, Murray, Scag, Snapper,
& Toro ride on lawnmower models.
Replaces OEM:
MTD 725-3167
Ariens 27541
Great Dane D38001
John Deere AM103119
Murray 57211
Scag 481638
Snapper 15707
Toro 82-2190
Standard Pack 1
SWT6928
Image
NEW
Safety Switch / plunger interlock switch, single post, right angle terminals,
snap mounted. Normally closed.
Fits: Selected Husqvarna models including LTH1542, MTD, AYP, Exmark,
John Deere, Murray, Scag ride on models.
Replaces OEM:
MTD 925-3166 / 725-3166
AYP 121305X
Exmark 1-740275
Husqvarna 532 12 13-05
John Deere AM104403
Murray 94159
Scag 48717
Standard Pack 1
NEW
SUN - SAFETY SUN GLASSES
Part No
Description
SUN6988
Viva Smoke Lens Safety Glasses
• Rimless & sporty wrap around design
• Dual-material temples with co-injected soft temple tips provide
comfortable fit.
• Close-fit - 10 base curve lens offers wide & unobstructed vision.
• Universal nose bridge for comfort fit.
• 99.9% UV radiation block out.
• Anti-scratch hard coating
• Weight 25 grams
• Australian Standard AS/NZS1337
Standard Pack 1
SUN6990
N18
Viva Bronze Mirror Lens Safety Glasses
• Rimless & sporty wrap around design
• Dual-material temples with co-injected soft temple tips provide
comfortable fit.
• Close-fit - 10 base curve lens offers wide & unobstructed vision.
• Universal nose bridge for comfort fit.
• 99.9% UV radiation block out.
• Anti-scratch hard coating
• Weight 25 grams
• Australian Standard AS/NZS1337
Standard Pack 1
Image
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
NEW PARTS 2009
TOL - TOOLS
Part No
Description
TOL5796
Mityvac MV8500 Vacuum and pressure gauge kit.
Ideal for servicing modern small engine carburettors where both vacuum &
pressure testing is required.
Also suitable for pressure testing chainsaw crankcases when used with
correct blocking off plates (not supplied with this kit, refer to relevent chainsaw
manufacturer)
Other features & benefits
• Provides either vacuum or pressure with equal precision and convenience.
• Features modern, ergonomic design for comfortable, long term use.
• Performs engine performance diagnostics, brake bleeding, fluid transfer,
evacuation, sampling etc.
• Includes components needed to perform numerous
diagnostic and mechanical tests.
Image
NEW
Kit Includes:
• Silverline elite hand vacuum / pressure pump with 2” (50mm)
diameter compound gauge and rubber boot
• 4.5 oz (135ml) fluid reservoir bottle with fluid transfer &
storage lids
• 4 tapered adapters for connecting to tubing from .09”
(2.3mm) to .50” (13mm) I.D
• 2 tapered manifold plugs
• 2 Tapered bleed screw adapters
• 2 Universal bleed screw adapters
• 12 Vacuum cap plugs
• Vacuum line T- adapter
• 5/32” (4mm) I.D x 1/4” (6.4mm) I.D Tubing adapter
• Rubber cupped adapter
• (2) 1/4” (6.4mm) I.D x 24” (610mm) long connection tubes
• 1/4” (6.4mm) I.D x 1 1/2” (40mm) long connection tube
• 1/4” (6.4mm) I.D x 3 5/8” (90mm) long fluid pick up tubes
• 5/32” (4mm) I.D x 3” (75mm) long vacuum test tube
• Master Cylinder Refill Kit
• Custom Moulded Case
• Users Manual
Specifications:
Packed weight: 5.5 lbs (2.5kg)
Packaged Size: 12.9” x 9.8” x 4.5” (330mm x 250mm x 115mm)
Standard Pack 1
TOL6851
10” Aluminium Felling Wedge
Standard Pack 1
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N19
NEW PARTS 2009
NEW PARTS 2009
N20
SCOTT BONNAR PARTS
Part No
Description
CHD1276
Scott Bonnar Grass Box Rubber (1 Pair)
Fits: Model 45 & 3.5hp 17” Reel Model No. 45058 & Select Model 45 (45158)
Replaces OEM: A453085K
Standard Pack 1 Pair
(As per page 223 of 2009 - 2010 Master Catalogue)
CHD1529
Scott Bonnar Primary Clutch Thrust Pad
Fits: Model 45 & 3.5hp 17” Reel Model No. 45058 & Select Model 45 (45158)
Replaces OEM: A333112
Standard Pack 1
(As per page 223 of 2009 - 2010 Master Catalogue)
CHD1833
Scott Bonnar Roller Ends
Fits: Model 45
Replaces OEM: A455865
Standard Pack 1
(As per page 223 of 2009 - 2010 Master Catalogue)
CHD2215
Scott Bonnar Adjustment Clamp
Bolt & Screw
Fits: Model 45 & 3.5hp
17” Reel Model No.45058 & select Model 45 (45158)
Replaces OEM: A456593K
Standard Pack 1
(As per page 223 of 2009 - 2010 Master Catalogue)
CHD2738
Scott Bonnar Chain Adjustment Pad
Fits: Model 45 reel mowers.
Replaces OEM: A455769
Standard Pack 1
(As per page 223 of 2009 - 2010 Master Catalogue)
CHM6959
415 Standard Roller Chain
1/2” x 3/16” x 10ft bulk roll.
Fits: Many applications including
Scott Bonnar 45 Reel Mowers.
Standard Pack 1 Roll
CHM6961
415 Standard Roller Chain Connecting Link / Joiner Link
Fits: Many applications including
Scott Bonnar 45 model reel mowers.
Standard Pack 1
CHM6965
415 Standard Offset / Half Link 1/2” x 3/16”
Fits: Many applications including
Scott Bonnar model 45 Reel Mower.
Standard Pack 1
SB345-0013
Clutch Drive Shaft 17”
Fits: Scott Bonnar Model 45 reel mowers.
Replaces OEM: Rover A454512
Scott Bonnar 345-0013
Standard Pack 1
Image
NEW
NEW
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
Part No
Description
SB345-0014
Clutch Drive Shaft 14” & 20” (cut to length required).
Fits: Scott Bonnar Model 45
reel mowers.
Replaces OEM: Rover A453907
Scott Bonnar 345-0014
Standard Pack 1
SB345-0057
Front Roller Shaft 14”, 17” & 20”
(cut to length required).
Fits: Scott Bonnar Model 45 reel mowers.
Replaces OEM: Rover A451047
Scott Bonnar 345-0057
Standard Pack 1
SB345-0064
Height Adjustment Rod
Fits: Scott Bonnar Model 45 reel mowers.
Replaces OEM: Rover A454678
Scott Bonnar 345-0064
Standard Pack 1
SB345-0072
Deflector Clamp & Screw
Fits: Scott Bonnar Model 45 reel mowers.
Replaces OEM: Rover A451143
Scott Bonnar 345-0072
Standard Pack 1
SB345-0056
Front Roller Shaft 17”
Fits: Scott Bonnar Model 45 reel mowers.
Replaces OEM: Rover A454301
Scott Bonnar: 345-0056
Standard Pack 1
SB46-20
Handle Grip Kit
Fits: Scott Bonnar Model 45 reel mowers.
Replaces OEM: Rover A1851069K
Scott Bonnar 46-20
Standard Pack 1 Pair
Image
NEW
NEW
NEW PARTS 2009
SCOTT BONNAR
NEW
NEW
NEW
NEW
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N21
NEW PARTS 2009
NEW PARTS 2009
N22
SHINDAIWA AFTER-MARKET TRIMMER SPARES
22F
Refer to our website for more Information
Part No
Description
Model
SHI20016-12120
SHI20010-72221
SHI20016-81180
SHI20035-85522
SHI20036-81670
SHI20142-12110
SHI67001-66012
SHI70043-85201
SHI70064-75130
SHI99909-159
SHI99909-229
22T
SHI20016-12120
SHI20010-72221
SHI20016-81180
SHI20035-85522
SHI20036-81670
SHI20142-12110
SHI70043-85201
SHI70064-75130
SHI99909-KIT
SHI99909-159
SHI99909-229
T230
SHI99909-KIT
SHI20010-72221
SHI20011-85401
SHI20016-12213
SHI20016-12120
SHI20016-12222
SHI20016-15123
SHI20016-71601
SHI20016-81180
SHI20016-81530
SHI20016-85310
SHI20018-81750
SHI20035-85522
SHI20036-81670
SHI20087-31210
SHI22035-13271
SHI22410-14500
SHI60023-98031
SHI62901-66112
Cylinder Gasket
22F
Plug Cap
22F
Valve Assembly
22F
Breather Valve
22F
Priming Pump
22F
Cylinder
22F
Guard Assembly Including Cutter
22F
Fuel Cap Assembly
22F
Recoil Spring
22F
Gasket/Diaphragm Kit
22F
Piston Kit
22F
Cylinder Gasket
22T
Plug Cap
22T
Valve Assembly
22T
Breather Valve
22T
Priming Pump
22T
Cylinder
22T
Fuel Cap Assembly
22T
Recoil Spring
22T
Blade Kit
22T
Gasket/Diaphragm Kit
22T
Piston Kit
22T
Blade Kit
T230
Plug Cap
T230
Fuel Filter S.A.
T230
Insulator New Style Threaded
T230
Cylinder Gasket
T230
Gasket (Insulator)
T230
Muffler Gasket
T230
Coil Assembly
T230
Valve Assembly
T230
Carburettor Gasket
T230
Fuel Pipe (Grommet)
T230
Air Filter
T230
Breather Valve
T230
Priming Pump
T230
C/Drum To Fit Alloy Housing 2 Bearing
T230
Bolt 7X1.00 L/H
T230
Cable Assembly (Old Style)
T230
Flock Air Filter
T230
Guard Shell
T230
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
T230
Refer to our website for more Information
Part No
Description
Model
SHI62901-66323
SHI62902-85320
SHI63023-62170
SHI70043-85201
SHI70064-75130
SHI70064-82210
SHI70140-51220
SHI70140-81710
SHI70140-81760
SHI70157-51101
SHI70234-98011
SHI70234-98020
SHI72933-75101
SHI72933-75140
SHI99909-12212
SHI99909-159
T2510
SHI20087-31210
SHI22035-13271
SHI22421-17202
SHI62901-66112
SHI62901-66323
SHI62902-82120
SHI62908-82120
T260
SHI20000-81740
SHI20010-72221
SHI20019-81111
SHI20019-85600
SHI20024-75130
SHI20024-75220
SHI20024-81800
SHI20024-83111
SHI20035-85522
SHI20036-81670
SHI20134-82100
SHI20134-85000
SHI22000-13290
SHI22000-13512
SHI22420-13510
SHI22421-14300
SHI22421-14320
SHI22421-17202
Bikini Guard Assembly
T230
Tank Guard Plastic
T230
Throttle Cable -New Style-
T230
Fuel Cap Assembly
T230
Recoil Spring
T230
Filter
T230
Spring
T230
A/F Back Plate
T230
Improved Cleaner Cover
T230
Clutch Assembly
T230
Piston Kit T230
T230
Improved Air Fiter Kit
T230
Recoil Str Assembly
T230
Dog -Starter Ratchet
T230
Insulator Block W/Bolt
T230
Gasket/Diaphragm Kit
T230
C/Drum To Fit Alloy Housin 2 Bearing
T2510
Bolt 7X1.00 L/H
T2510
Strap Assembly
T2510
Guard Shell
T2510
Bikini Guard Assembly
T2510
Air Filter *Old Type*
T2510
Air Filter *New Type*
T2510
Air Filter Foam
T260
Plug Cap
T260
Body Top Comp
T260
Pump Comp
T260
Recoil Spring
T260
Ratchet
T260
Cover Assembly
T260
Throttle Cable
T260
Breather
T260
Priming Pump
T260
Cleaner Body Comp
T260
Fuel Tank
T260
Bolt Guard
T260
Bolt 8 X 1.25 L/H
T260
Holder A
T260
Throttle Lever
T260
Body
T260
Strap Assembly
T260
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
SHINDAIWA AFTER-MARKET TRIMMER SPARES
N23
NEW PARTS 2009
NEW PARTS 2009
N24
SHINDAIWA AFTER-MARKET TRIMMER SPARES
T260
Refer to our website for more Information
Part No
Description
Model
SHI22495-13220
SHI37019-63170
SHI60028-98040
SHI60088-98310
SHI62901-66112
SHI62901-66323
SHI62902-85320
SHI63030-63023
SHI70043-85201
SHI70102-75101
SHI70107-81830
SHI70140-51220
SHI70144-81320
SHI70144-81330
SHI70144-81340
SHI70157-51101
SHI72474-17201
SHI72572-98010
SHI72572-98020
SHI72572-98040
T270
SHI20024-41210
SHI20024-75130
SHI20024-75220
SHI20024-81023
SHI20024-81800
SHI20056-81740
SHI22000-13512
SHI62901-66112
SHI62901-66323
SHI63000-63170
SHI64113-66312
SHI70036-83110
SHI70036-98020
SHI70043-85201
SHI70102-51100
SHI70102-51220
SHI70102-81710
SHI70162-75101
SHI70244-98040
SHI70244-98050
SHI72007-17202
SHI72575-98021
Bevel Gear
T260
Holder B
T260
Improved Flock Air Filter
T260
Bevel & Pinion Set
T260
Guard Shell
T260
Bikini Guard Assembly
T260
Tank Guard Plastic
T260
Gearcase Assembly
T260
Fuel Cap Assembly
T260
Recoil Starter
T260
Adjust Pipe
T260
Spring
T260
Adj Pipe Assembly
T260
Tk Carb Adjuster Pipe
T260
Body Top Comp (Tk Threaded)
T260
Clutch Assembly
T260
Strap Assembly
T260
Piston Set
T260
Gasket/Diaphragm Kit
T260
Throttle Cable Set
T260
Piston Ring Set
T270
Recoil Spring
T270
Ratchet
T270
Carb Assembly
T270
Cover Assembly
T270
Filter
T270
Bolt 8 X 1.25 L/H
T270
Guard Shell
T270
Bikini Guard Assembly
T270
Holder B
T270
Bikini Guard Assembly
T270
Throttle Cable
T270
Diaphragm Kit
T270
Fuel Cap Assembly
T270
Clutch Assembly
T270
Clutch Spring
T270
Cleaner Body
T270
Recoil Starter Assembly
T270
Piston Assembly
T270
Tk Carb Gasket, Diaphragm. Kit
T270
Strap Assembly
T270
Heavy Duty Clutch Drum
T270
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
T270
Refer to our website for more Information
Part No
Description
Model
SHI72575-98031
SHI72575-98060
T3410
SHI72575-98040
T350
SHI20011-31200
Clutch Shoe Kit Steel
T270
Heavy Duty Clutch Spring
T270
Clutch Assembly
T3410
Clutch Drum Assembly
T350
NEW PARTS 2009
SHINDAIWA AFTER-MARKET TRIMMER SPARES
SHINDAIWA AFTER-MARKET BRUSHCUTTER SPARES
C230
Part No
Description
Model
SHI20011-85401
SHI20016-12120
SHI20016-12213
SHI20016-12222
SHI20016-15123
SHI20016-71601
SHI20016-81180
SHI20016-81530
SHI20016-85310
SHI20018-81750
SHI20087-31210
SHI20134-85000
SHI22035-13271
SHI22411-14500
SHI60023-98031
SHI60088-98310
SHI70064-75130
SHI70064-82210
SHI70140-81710
SHI70140-81760
SHI70234-98011
SHI70234-98020
SHI72572-98020
SHI72933-75101
SHI72933-75140
SHI99909-12212
SHI99909-159
SHI99909-KIT
C260
SHI20000-81740
SHI20010-72221
SHI20019-81111
SHI20019-85600
Fuel Filter S.A.
C230
Cylinder Gasket
C230
Insulator New Style Threaded
C230
Gasket (Insulator)
C230
Muffler Gasket
C230
Coil Assembly
C230
Valve Assembly
C230
Gasket
C230
Fuel Pipe (Grommet)
C230
Air Filter
C230
C/Drum To Fit Alloy Housing 2 Bearing
C230
Fuel Tank
C230
Bolt 7X1.00 Left Hand
C230
Cable Assembly
C230
Flock Air Filter
C230
Bevel & Pinion Set
C230
Recoil Spring
C230
Filter
C230
A/F Back Plate
C230
Improved Cleaner Cover
C230
Piston Kit T230
C230
Improved Air Fiter Kit
C230
Gasket/Diaphragm Kit
C230
Recoil Str Assembly
C230
Dog -Starter Ratchet
C230
Insulator Block With Bolt
C230
Gasket/Diaphragm Kit
C230
Blade Kit
C230
Air Filter Foam
C260
Plug Cap
C260
Body Top Comp
C260
Pump Comp
C260
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N25
NEW PARTS 2009
NEW PARTS 2009
N26
SHINDAIWA AFTER-MARKET BRUSHCUTTER SPARES
C230
Refer to our website for more Information
Part No
Description
Model
SHI20024-75130
SHI20024-75220
SHI20024-81800
SHI20035-85522
SHI20036-81670
SHI20134-82100
SHI22000-13290
SHI22420-13510
SHI22495-13220
SHI37019-63170
SHI60028-98040
SHI62902-85320
SHI63030-63023
SHI70043-85201
SHI70107-81830
SHI70140-51220
SHI70144-81320
SHI70144-81330
SHI70144-81340
SHI70157-51101
SHI72572-98010
C270
SHI20024-41210
SHI20024-75130
SHI20024-75220
SHI20024-81023
SHI20024-81800
SHI20056-81740
SHI22000-13512
SHI63000-63170
SHI64000-66311
SHI70036-98020
SHI70043-85201
SHI70102-51100
SHI70102-51220
SHI70102-81710
SHI70162-75101
SHI70244-98040
SHI70244-98050
SHI72007-17202
SHI72575-98021
SHI72575-98031
SHI72575-98060
Recoil Spring
C260
Ratchet
C260
Cover Assembly
C260
Breather
C260
Priming Pump
C260
Cleaner Body Comp
C260
Bolt Guard
C260
Holder A
C260
Bevel Gear
C260
Holder B
C260
Improved Flock Air Filter
C260
Tank Guard Plastic
C260
Gearcase Assembly
C260
Fuel Cap Assembly
C260
Carburettor Adjust Pipe
C260
Clutch Spring
C260
Adj Pipe Assembly
C260
Tk Carb Adjuster Pipe
C260
Body Top Comp (Tk Threaded)
C260
Clutch Assembly
C260
Piston Set
C260
Piston Ring Set
C270
Recoil Spring
C270
Ratchet
C270
Carburettor Assembly
C270
Cover Assembly
C270
Filter
C270
Bolt 8 X 1.25 L/H
C270
Holder B
C270
Guard Assembly
C270
Diaphragm Kit
C270
Fuel Cap Assembly
C270
Clutch Assembly
C270
Clutch Spring
C270
Cleaner Body
C270
Recoil Starter Assembly
C270
Piston Assembly
C270
Tk Carb Gasket, Diaphragm. Kit
C270
Strap Assembly
C270
Heavy Duty Clutch Drum
C270
Clutch Shoe Kit Steel
C270
Heavy Duty Clutch Spring
C270
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
C350
Refer to our website for more Information
Part No
Description
Model
SHI20011-31200
SHI20011-85401
SHI20020-86140
SHI20056-81740
SHI20060-12210
SHI20060-81760
SHI22015-13261
SHI22015-13270
SHI64000-66311
SHI64007-64253
SHI64007-67011
SHI64008-66311
SHI70131-75100
SHI70131-75120
SHI70200-33112
SHI70200-81020
SHI70200-81170
SHI70210-15212
SHI72451-14502
SHI72451-14570
B450
SHI20011-85401
SHI20020-86140
SHI20021-31200
SHI20056-81740
SHI20060-12210
SHI20060-81760
SHI22015-13261
SHI22015-13270
SHI64007-64253
SHI64007-67011
SHI64008-66311
SHI70131-75120
SHI70131-75100
SHI70200-33112
SHI70210-12111
SHI70210-15212
SHI70210-15311
SHI72451-14502
SHI72451-14570
SHI99909-450
SHI99909-451
Clutch Drum Assembly
C350
Fuel Filter S.A.
C350
Band
C350
Filter
C350
Insulator
C350
Cleaner Cover Comp
C350
Bolt 10 X 1.25
C350
Bolt Guard
C350
Guard Assembly
C350
Throttle Control Assembly
C350
Pro Harness Assembly
C350
Debris Shield Assembly
C350
Recoil Starter S.A.
C350
Starter Reel
C350
Stand
C350
Carburetor S.A.
C350
Jet Needle
C350
Muffler Gasket
C350
Throttle Lever A
C350
Throttle Cable Comp
C350
Fuel Filter S.A.
B450
Band
B450
Clutch Drum Set
B450
Filter
B450
Insulator
B450
Cleaner Cover Comp
B450
Bolt 10 X 1.25 L/H
B450
Bolt Guard
B450
Throttle Control Assembly
B450
Pro Harness Assembly
B450
Debris Shield Assembly
B450
Starter Reel
B450
Recoil Starter S.A.
B450
Stand
B450
Cylinder
B450
Muffler Gasket
B450
Muffler Guard
B450
Throttle Lever A
B450
Throttle Cable Comp
B450
Piston Kit
B450
Diaphragm Kit
B450
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
SHINDAIWA AFTER-MARKET BRUSHCUTTER SPARES
N27
NEW PARTS 2009
NEW PARTS 2009
SHINDAIWA AFTER-MARKET BRUSHCUTTER SPARES
B530
Refer to our website for more Information
Part No
Description
Model
SHI22015-13261
SHI62035-82121
SHI64007-67011
SHI64008-66311
BP35
SHI22051-11911
SHI22051-11922
Bolt 10 X 1.25 LH
B530
Air Filter
B530
Pro Harness Assembly
B530
Debris Shield Assembly
B530
Flexible Pipe
BP35
Flex Shaft
BP35
SHINDAIWA AFTER-MARKET BRUSHCUTTER GUARDS
ALL MODELS
Part No
Description
Model
SHI62903-66111
SHI62903-66331
SHI81090
Guard (All Models)
ALL MODELS
Sub Guard Assembly ‘Skirts’ (All Models)
ALL MODELS
Debris Shield Euro Shell (All Models)
ALL MODELS
SHINDAIWA AFTER-MARKET CHAINSAW SPARES
285S
N28
Part No
Description
Model
SHI22154-82310
SHI22163-51110
SHI69018-98312
352S
SHI22154-82310
SHI22159-97310
SHI22163-51110
SHI69018-98312
SHI72363-98010
377
SHI22154-82310
SHI22159-97310
SHI72363-98010
488PI
SHI22160-71511
SHI22961-82410
SHI22961-82420
SHI72365-98011
577
SHI22152-12111
SHI22169-71510
SHI22169-82310
757
SHI22169-55110
SHI22169-71510
SHI22169-82310
Air Cleaner
285S
Clutch Drum
285S
Flocked Air Filter
285S
Air Cleaner
352S
Flocked Air Filter
352S
Clutch Drum
352S
Flocked Air Filter
352S
Piston Assembly
352S
Air Cleaner
377
Flocked Air Filter
377
Piston Assembly
377
Excitor Coil
488PI
Pre-Filter
488PI
Air Filter
488PI
Piston Assembly
488PI
Cylinder
577
Exciter Coil
577
Filter
577
Gear
757
Exciter Coil
757
Filter
757
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
757
Refer to our website for more Information
Part No
Description
Model
SHI72330-15103
SHI72330-33710
SHI72330-54651
SHI72330-82320
Muffler S.A.
757
Cushion 26
757
Guard
757
Pre-Filter
757
SHINDAIWA AFTER-MARKET HEDGE TRIMMER SPARES
22DH
Part No
Description
Model
SHI20142-12110
SHI99909-159
SHI20036-81670
SHI99909-229
AH230
SHI18500-50102
SHI19601-01506
SHI20016-12213
SHI20016-12222
SHI20016-81180
SHI38121-62010
SHI63023-62170
DH230
SHI18500-60104
SHI18500-70103
SHI19601-01603
SHI20870-62110
SHI20870-62120
SHI20870-62131
SHI20870-62150
SHI20870-82210
SHI20870-85104
SHI20870-85151
SHI22011-97840
SHI60804-98010
SHI60805-98010
SHI63600-61170
SHI63600-61330
DH2510
SHI19601-01603
SHI20870-85151
SHI62902-41120
HT230
SHI20870-82210
Cylinder
22DH
Gasket/Diaphragm Kit
22F
Priming Pump
22F
Piston Kit
22F
Chrome Blade
AH230
Bar Cover
AH230
Insulator New Style Threaded
T230
Gasket (Insulator)
T230
Valve Assembly
T230
Cutter Sub Assembly(Chrome)
AH230
Throttle Cable -New Style-
AH230
Chrome Blade (24”) Per Blade
DH230
30” Chrome Blade
DH230
Blade Cover 30”
DH230
Bolt, Cutter S.A.
DH230
Bolt, Cutter S.A.
DH230
Washer
DH230
Bolt, Cutter S.A.
DH230
Filter
DH230
Fuel Tank Assembly
DH230
Fuel Cap Assembly
DH230
Lock Nut
DH230
Cutter Sub Assembly (24”)
DH230
Cutter Sub Assembly (30”)
DH230
Rod
DH230
Needle Bearing
DH230
Blade Cover 30”
DH2510
Fuel Cap Assembly
DH2510
Piston Ring Set
DH2510
Filter
HT230
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
SHINDAIWA AFTER-MARKET CHAINSAW SPARES
N29
NEW PARTS 2009
NEW PARTS 2009
SHINDAIWA AFTER-MARKET BLOWER SPARES
HT230
Refer to our website for more Information
Part No
Description
Model
SHI20870-62102
EB240S
SHI72933-81230
SHI72933-82210
SHI72933-98020
EB3410
SHI62902-82120
SHI62908-82120
EB630
SHI60035-98070
SHI68206-75010
SHI68206-82400
SHI68206-85011
SHI68206-87010
EB802
SHI20036-81670
SHI68242-82120
SHI68242-82310
EB8510
SHI20036-81670
SHI68206-87010
SHI68900-82120
SHI68900-82320
30” Blade Assembly
HT230
Main Jet
EB240S
Filter
EB240S
Piston Set - Suit
EB240S
Air Filter *Old Type*
EB3410
Air Filter *New Type*
EB3410
Pre Filter{Air Filter}
EB630
Starter Assembly
EB630
Air Filter Improved Version
EB630
Fuel Tank Assembly
EB630
Strap Assembly
EB630
Priming Pump
EB802
Air Filter
EB802
Foam Pre-Filter
EB802
Priming Pump
EB8510
Strap Assembly
EB8510
Air Filter
EB8510
Pre-Filter
EB8510
SHINDAIWA AFTER-MARKET MULTI-TOOL SPARES
65001
N30
Part No
Description
Model
SHI22035-13271
SHI62901-66112
SHI62901-66323
SHI99909-KIT
65003
SHI18500-50102
SHI19601-01506
SHI38121-62010
M230
SHI20016-12120
SHI20016-12213
SHI20016-12222
SHI20016-15123
SHI20016-71601
SHI20016-81180
SHI20016-81530
Bolt 7X1.00 L/H
T230
Guard Shell
T230
Bikini Guard Assembly
T230
Blade Kit
65001
Chrome Blade
65003
Bar Cover
65003
Cutter Sub Assembly(Chrome)
65003
Cylinder Gasket
M230
Insulator New Style Threaded
M230
Gasket (Insulator)
M230
Muffler Gasket
M230
Coil Assembly
M230
Valve Assembly
M230
Carburettor Gasket
M230
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
NEW PARTS 2009
M230
Refer to our website for more Information
Part No
Description
Model
SHI20016-85310
SHI20018-81750
SHI20035-85522
SHI22410-14500
SHI60023-98031
SHI63880-64350
SHI65017-64330
SHI65017-98310
SHI70157-51101
SHI70234-98011
SHI70234-98020
SHI72933-75101
SHI72933-75140
SHI99909-12212
SHI99909-159
M2510
SHI62902-82120
SHI62908-82120
SHI65017-64330
SHI65017-98310
Fuel Pipe (Grommet)
M230
Air Filter
M230
Breather Valve
M230
Cable Assembly (Old Style)
M230
Flock Air Filter
M230
Joint Assembly
M230
Main Shaft Assembly. (Short) Multitool
M230
Outer Pipe Comp. (Short) Multitool
M230
Clutch Assembly
M230
Piston Kit T230
T230
Improved Air Fiter Kit
M230
Recoil Starter Assembly
M230
Dog -Starter Ratchet
M230
Insulator Block W/Bolt
T230
Gasket/Diaphragm Kit
T230
Air Filter *Old Type*
T2510
Air Filter *New Type*
T2510
Main Shaft Assembly. (Short) Multitool
M2510
Outer Pipe Comp. (Short) Multitool
M2510
NEW PARTS 2009
SHINDAIWA AFTER-MARKET MULTI-TOOL SPARES
SHINDAIWA AFTER-MARKET CUT OFF SAW SPARES
EC7600
Part No
Description
Model
SHI38010-12112
SHI38010-64131
SHI38010-82311
SHI38010-82581
SHI68004-98311
ALL MODELS
SHI65017-64330
SHI65017-98310
SHI70210-15311
SHI72174-99200
SHI22495-13220
Cylinder
EC7600
Drive Belt
EC7600
Pre-Filter
EC7600
Filter
EC7600
Piston Assembly
EC7600
Main Shaft Assembly. (Short) Multitool
M230 / M2510
Outer Pipe Comp. (Short) Multitool
M230 / M2510
Muffler Guard
B450
Pressure Gauge/Block Off Kit
Bevel Gear
T260 / C260
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.
N31
NEW PARTS 2009
NEW PARTS 2009
NEW
FUEL
STABILIZER
New and Improved Formula
• Highly concentrated
additive for the treatment of
diesel and fuel
• Dissolves, disperses and
controls biological contamination
FUE6326 in diesel
• Stabilises and removes Fuel Varnish
from Unleaded Fuel
• Does not affect seals, hoses and fittings
• Regular use eliminates further problems
and regrowth of bacteria and:
• Improved Fuel Economy
• More Power
CALL YOUR NEAREST
SALES REPRESENTATIVE:
N32
Rick Winter: QLD
0413 622 660
Andrew Marsh: QLD
0413 622 685
Tim Rudd: N QLD
0413 622 690
Richard Grant: QLD
0413 622 694
Con Mackie: QLD
0413 622 684
Steve Projceski: NSW
0413 622 695
John Baglee: NSW
0413 622 696
Ralph Goillon: VIC
0408 622 692
Ben Crain: WA
0407 003 865
Peter Jenkins: NSW
0413 622 697
Errol Hicks: VIC
0413 622 679
Andrew Donald: TAS
0418 133 321
Michael Boulton: NSW
0413 622 681
Trevor Windridge: VIC
0428 507 018w
www.gaspares.com.au VIC: 1300 760 480 NSW: 1300 363 005 QLD: 1300 363 004 WA: 1300 307 574
Copyright © Roy Gripske & Sons 2009.

Similar documents

8LT Series

8LT Series . black zinc nickel (Z) . olive green cadmium (B) . nickel (F)

More information

updated cross reference list mower belts 2014

updated cross reference list mower belts 2014 5398A, 5302G, also 32" cut Kingcat 6999I, 7300J, 7301I Kingcat models 7300J and 7301I Kingcat 40" cut side discharge, 7300J, 7301I

More information