Anexa 3 - Universitatea Politehnica din Bucuresti

Transcription

UNIVERSITATEA POLITEHNICA BUCURESTI
FIŞA DE VERIFICARE A ÎNDEPLINIRII STANDARDELOR DE
PREZENTARE LA CONCURS
CANDIDAT: Sl. Dr. Ing. Leonard Marius MELCESCU
Post Nr. 14, Conferenţiar, Departamentul de maşini, Materiale şi Acţionări Electrice, Facultatea
de Inginerie Electrică
Condiţii
Îndeplinire condiţii
A. Doctor
B. Îndeplinirea standardelor minime naţionale conform
OMECTS Nr. 6560/20.12.2012; MO, I, 890 şi 890bis
/27.12.2012 modificat prin OMECTS Nr. 4204/15.07.2013 MO,
I, 440/18.07.2013.
(Conferenţiar, Comisia CNATDCU nr. 9, Inginerie Electrică)
Condiţii minimale (Punctaj)
Diploma de Doctor în domeniul Inginerie Electrică, din
13.04.2007 emisă de Universitatea Politehnica
Bucureşti
Standarde îndeplinite, conform Comisiei CNATDCU
Nr.9. Inginerie Electrică
Anexată: Fişa de calcul şi de susţinere a îndeplinirii
standardelor minimale specifice domeniului, în acord
cu realizările menţionate:
Minim prevăzut
Realizat
A1. Activitate didactică şi profesională
A2. Activitate de cercetare
A3. Recunoaştere şi impactul activităţii
40
150
30
100,16
338,69
200,18
TOTAL (A)
220
639,03
Minim prevăzut
Realizat
2
2
1
1
3
1
5
10
8
16
1
6
Condiţii minimale obligatorii pe subcategorii
(Număr)
A.1.1.1 Cărţi şi capitole în cărţi de specialitate – Cărţi cu
ISBN/capitole ca autor didactice sau monografii.
A.1.2.1 Suport didactic – suport de curs inclusiv electronic
A.1.2.2 Suport didactic – Îndrumar de laborator/aplicaţii
A 2.1. Articole în extenso în reviste cotate şi în volume
proceedings indexate ISI Thomson Reuters*), şi brevete de
invenţie
A 2.2 Articole în reviste şi în volume ale unor manifestări
ştiinţifice indexate în alte baze de date internaţionale**)
A 2.3.1 Granturi/proiecte câştigate prin competiţie Director/responsabil
C. Atestarea studiilor (diplomă_foi matricole) şi a altor
realizări profesionale
Diplomă de Licenţă, în domeniul Ingineriei Electrice,
Specializarea Acţionări electrice Nr. 7185 din
17.07.1995 emisă de Universitatea Politehnica din
Bucureşti, Facultatea de Electrotehnică.
Diplomă de Studii Aprofundate / Master în profilul
Electric, Specializarea Optimizarea echipamentelor
pentru conversia energiei electrice, Nr. 32 din
14.10.1996 emisă de Universitatea Politehnica din
Bucureşti, Facultatea de Electrotehnică.
Alte diplome
Alte certificate
*) Conform situaţiei curente de pe site-ul ISI THOMSON REUTERS
**) Bazele de date internaţionale (BDI) luate în considerare pentru articolele publicate în reviste şi publicate în volumele unor manifestări
ştiinţifice, cu excepţia articolelor publicate în reviste cotate ISI, sunt cele recunoscute pe plan ştiinţific internaţional precum (nelimitativ):
Scopus, IEEE Xplore, Science Direct, Elsevier, Wiley, ACM, BDLP, Springerlink, Engineering Village, Cabi, Emerald, CSA, Compendex,
INSPEC, Google Scholar.
Subsemnatul Leonard Marius MELCESCU, candidat la concursul pentru ocuparea postului de Conferenţiar, poziţia 14, Departamentul de
Maşini, Materiale şi Acţionări electrice, Facultatea de Inginerie Electrică, din Domeniul de Studii Universitare de Inginerie Electrică arondat
Comisiei de Specialitate CNATDCU [OMECTS 6560/2012 modificat prin OMECTS Nr. 4204/15.07.2013] Nr 9, declar pe proprie
răspundere, cunoscând prevederile art. 292 privind falsul în declaraţii, din legea 286/2009-Codul Penal, că sunt îndeplinite toate standardele
minime prevăzute de Metodologia UPB 2013 pentru înscrierea la concurs [Secţiunea II.3] şi OMECTS 6560/2012 modificat prin OMECTS
Nr. 4204/15.07.2013 [C+P], în momentul înscrierii la concurs, şi susţin veridicitatea informaţiilor prezentate în dosar şi în materialul de mai
sus. Lucrările considerate a fi incluse în Baza ISI Thomson Reuters sau în alte Baze de Date Internaţionale [BDI] sunt vizibile în aceste baze,
în dreptul numelui candidatului, la această dată.
Candidat,
Data,
Sl. Dr. Ing. Leonard Marius MELCESCU
25.01.2014
A1. Activitatea didactică şi pedagogică
COD
Publicatie
Indicator
Kpi
A.1.1.1.2
Covrig M., Melcescu L., Vasile N., MAŞINI ELECTRICE Probleme
specifice Maşini de tip sincron, Editura Printech, Bucureşti 2004, ISBN
973-718-264-2, 216 pagini;
14,40
A.1.1.1.2
Covrig M., Melcescu L., Vasile N., Pârlog-Cristian R., MAŞINI
ELECTRICE Probleme specifice Maşina Asincronă Trifazată, Editura
Printech, Bucureşti 2002, ISBN 973-652-562-7, 193 pagini.
9,65
A.1.2.1
Covrig M., Cepişcă C., Pârlog-Cristian R., Melcescu L.,
CONVERTOARE ELECTRICE, Editura Printech, Bucureşti 2002, ISBN
973-652-660-7, 204 pagini;
5,1
A.1.2.1
Melcescu L., CONVERTOARE ELECTROMECANICE, Suport de curs
in format electronic, UPB Facultatea de Inginerie Electrică, 2013,
Bucureşti,425 pagini.
42,5
A.1.2.1
Melcescu L., MAŞINI ŞI ACŢIONĂRI ELECTRICE, Suport de curs in
format electronic, UPB Facultatea de Inginerie Aerospaţială, 2012,
Bucureşti, 270 pagini.
27
A.1.2.2
Covrig. M, Ghiţă C, Savin M.C., Melcescu L., MAŞINA SINCRONA ŞI
MAŞINA DE CURENT CONTINUU, Încercări de laborator, Editura
Bren, Bucureşti 1998, ISBN -973-9427-11-1, 121 pagini.
1,51
A3. Recunoasterea
impactului activităţii
A2. Activitatea de cercetare
TOTAL A1
Indicator
Kpi
COD
A.2.1
A.2.2
A.2.3
A.2.4
100,16
Articole în reviste cotate şi proceedings indexate ISI Thomson Reuters
şi brevete de invenţii
Articole în reviste şi în volume ale unor manifestări ştiinţifice indexate
în alte baze de date internaţionale
Granturi câştigate prin competiţie (director/responsabil)
Contracte de cercetare/consultanţă (valoare echivalentă de minimum
2000 Euro)
TOTAL A2
74,69
94,00
168,00
2,00
338,69
Indicator
Kpi
COD
A.3.1
Citari in reviste si volumele conferintelor ISI si BDI
44,18
A.3.3.
Membru in colectivele de redactie sau comitete ştiinţifice, organizator
de manifetări ştiinţifice, recenzor pentru reviste şi manifestări ştiinţifice
naţionale si internaţionale
140,00
A.3.4
Experienta de management
16,00
TOTAL A3
TOTAL A1+A2+A3
200,18
639,03
COD
A.2.1
Nr.
Crt.
1
A.2.1
2
A.2.1
3
A.2.1
4
A.2.1
5
A.2.1
6
A.2.1
7
A.2.1
8
A.2.1
9
A.2.1
10
Publicaţie
Ris.1. Melcescu L., Cistelecan M. V., Craiu O., Popescu M., Numerical
Analysis of Claw Pole Synchronous Machine with Hybrid Contactless
Excitation, PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), Nr.
7b, pp. 106 109, Polonia, 2012, ISSN: 0033-2097, INDEX ISI Thomson
Reuters, WOS:000306011400027.
Ris.2. Tudorache T., Melcescu L., FEM Optimal Design of Energy Efficient
Induction Machines. Advances in Electrical and Computer Engineering,
nr.9, pp. 58-64, 2009, Romania, ISSN: 1582-7445, INDEX ISI Thomson
Reuters, WOS:000268723600009, Factor Impact 0,552.
Vis.1. Uncuţa S., Melcescu L., Covrig M., Craiu O., Ursu T., Numerical
Analysis of a PM Synchronous Motor Used in Electrical Vehicles, The 7th
International Symposium on ADVANCED TOPICS IN ELECTRICAL
ENGINEERING, May 12-14, 2011, pp. 75-80, Bucharest, Romania, ISBN:
978-1-4577-0507-6, ISSN: 1843-8571, INDEX ISI Proceedings Paper
Thomson Reuters, WOS:000310701200014.
Vis.2. Stoica C.; Melcescu L.; Lefter E.; Constantinescu L.M.; Computation
of the characteristics eddy current electromagnetic brake for a bicycle, by
the finite element method 3D, Optimization of Electrical and Electronic
Equipment (OPTIM), 2010 12th International Conference on , vol., no.,
pp.436-440, 20-22 May 2010, ISSN: 1842-0133, INDEX ISI Proceedings
Paper Thomson Reuters, WOS:000291967300061.
Vis.3. Tudorache T.; Melcescu L.; Popescu M.; Methods for cogging torque
reduction of directly driven PM wind generators, Optimization of Electrical
and Electronic Equipment (OPTIM), 2010 12th International Conference on ,
vol., no., pp.1161-1166, 20-22 May 2010, ISSN: 1842-0133, INDEX ISI
Proceedings Paper Thomson Reuters, WOS:000291967300173.
Vis.4. Melcescu L., Cistelecan M.V., Popescu M., Craiu O., Gheorghe S.,
Claw-pole line-start permanent-magnet synchronous motor design and
development, Advanced Electromechanical Motion Systems & Electric
Drives Joint Symposium, 2009. ELECTROMOTION 2009. 8th International
Symposium on , vol., no., pp. 13-17, 1-3 July 2009, ISBN 978-2-9159-13255, INDEX ISI Proceedings Paper Thomson Reuters,
WOS:000278587400003.
Vis.5. Melcescu L., Popescu M., Covrig M., Cistelecan M.V., Craiu O.,
Numerical and Experimental Analysis of Two Permanent Magnet Claw
Poles Wind Generators, ICEM'08- XVIII International Conference on
Electrical Machines vols 1-4 , Vilamoura, Portugal, 6-9 September 2008, pp.
1521-1525, ISBN 978-1-4244-1735-3, INDEX ISI Proceedings Paper
Vis.6. Cistelecan M.V., Popescu M., Melcescu L., Tudorache T., Three
phase line start claw poles permanent magnet motor with pole changing
winding, Power Electronics, Electrical Drives, Automation and Motion, 2008.
SPEEDAM 2008, International Symposium on, vol., no., pp.239-243, 11-13
June 2008, ISBN 978-1-4244-1663-9, INDEX ISI Proceedings Paper
Vis.7. Paţurcă S. V., Covrig M., Melcescu L., Cepisca C., A Study of the
Improvement ot the Mechanic Eccentric Power Presser Dynamics by Using
Variable Frequency Induction Motor, 7th WSEAS International Conference
on Power System, Beijing, Peoples R China, Sept. 15-17 2007, Proc. of the
7th WSEAS/ Int. Conf. on Electric Power Systems, pp. 251-255; ISBN: 978960-8457-90-4, ISSN: 1790-5117, INDEX ISI Proceedings Paper Thomson
Reuters, WOS:000254224000045.
B1. Cistelecan V., Popescu M., Melcescu L. Maşină electrică cu excitaţie
hibridă fără contacte alunecătoare. Brevet de invenţie RO 00125062 /
30.12.2010.
TOTAL A.2.1
Indicator
Kpi
6,25
18,02
5,00
6,25
8,33
5,00
5,00
6,25
6,25
8,33
74,69
COD
A.2.2
A.2.2
A.2.2
A.2.2
A.2.2
A.2.2
A.2.2
A.2.2
A.2.2
A.2.2
Nr.
Crt.
Publicatie
Indicator
Kpi
1
Ris.3. Cistelecan M.V, Melcescu L., Cosan H.B, New Improvements in the
Three Phase Windings Performance by Using Multiple Layer Arrangement,
ELECTROMOTION Vol.20, Nr.1-4, Cluj-Napoca, 2013, Romania, pp. 160165, ISSN 1223-057X, INDEX Inspec.
6,67
2
Ris.4. Paturca S.V., Bostan V., Melcescu L., Improvements of the direct
torque controlled induction motor drives, Constanta Maritime University
Annals, Year XIII, Vol.18, pp. 199 -204, Constanta, 2012, Romania, ISSN:
1582-3601, INDEX Google Scholar.
6,67
3
Ris.5. Melcescu L., Demeter E., Costea-Marcu I., Craiu O., Covrig M., 3D
Numerical Model of Permanent Magnet Synchronous Motor for Metropolitan
Electric Transportation Systems, EEA - Electrotehnica, Electronica,
Automatica, Vol.58 Nr.3., pp. 50-57 , Bucureşti, 2010, Romania, ISSN:
1582-5175, INDEX Copernicus Journal Master List.
4,00
4
Ris.6. Melcescu L., Covrig M., Moraru A., Analyses of Core Skewing
Influence in Permanent Magnet Synchronous Machine by 2D FEM Field
Computation, UPB Scientific Bulletin, Series C, Vol.68, No.2, pp. 41-52,
Bucureşti, 2006, Romania, ISSN: 2286-3540, INDEX Inspec.
6,67
5
Vis.8. Melcescu L., Tudorache T., Popescu M., Finite Element Analysis of a
Three Speed Induction Machine, International Conference on Renewable
Energies and Power Quality (ICREPQ'13), 20 22 March 2013 Bilbao, Spain,
ISSN 2172-038 X, INDEX Google Scholar.
6,67
6
Vis.9. Tudorache T., Melcescu L., Popescu M. PMSGs Solutions for
Gearless Wind Conversion Systems with Battery Storage, International
Conference on Renewable Energies and Power Quality (ICREPQ'13), 20 22
March 2013 Bilbao, Spain, ISSN 2172-038 X, INDEX Google Scholar.
6,67
7
Vis.10. Puscasu S.V., Melcescu L.; Covrig M., Cogging torque investigation
in permanent magnet synchronous motor used for electrical vehicles,
Advanced Topics in Electrical Engineering (ATEE), 2013 8th International
Symposium on, vol., no., pp.1,4, 23-25 May 2013., Bucharest, Romania,
ISBN: 978-1-4673-5979-5, INDEX IEEE Xplore, SCOPUS.
6,67
8
Vis.11. Covrig, M., Melcescu L., Craiu O., The equivalent winding — A
solution to a unified approach for the magnetic force inside round airgaps of
electrical machines, Advanced Topics in Electrical Engineering (ATEE),
2013 8th International Symposium on , vol., no., pp.1 6, 23-25 May 2013,
ISBN: 978-1-4673-5979-5, INDEX IEEE Xplore, SCOPUS.
6,67
9
Vis.12. Melcescu, L.M., Cistelecan M.V., Popescu M., Craiu, O., Design
and development of a hybrid excited claw pole synchronous machine,
Electrical Machines and Power Electronics and 2011 Electromotion Joint
Conference (ACEMP), 2011 International Aegean Conference on, vol., no.,
pp.799 804, 8-10 Sept. 2011, ISBN: 978-1-4673-5004-4, INDEX IEEE
Xplore, SCOPUS.
5,00
10
Vis.13. Cistelecan M.V., Melcescu L.M., Cosan H.B., Popescu M.,
Induction motors with changeable pole windings in the ratio 1:4, Electrical
Machines and Power Electronics and 2011 Electromotion Joint Conference
(ACEMP), 2011 International Aegean Conference on , vol., no., pp.781-786,
8-10 Sept. 2011, ISBN: 978-1-4673-5004-4, INDEX IEEE Xplore, SCOPUS.
5,00
A.2.2
11
A.2.2
12
A.2.2
13
A.2.2
14
A.2.2
15
A.2.2
16
Vis.14. Melcescu L.M.; Cistelecan M.V., Craiu O., Cosan H.B., A new 4/6
pole-changing double layer winding for three phase electrical machines,
Electrical Machines (ICEM), 2010 XIX International Conference on , vol.,
no., pp.1-6, 6-8 Sept. 2010, ISBN: 978-1-4244-4174-7, INDEX IEEE Xplore,
SCOPUS.
Vis.15. Tudorache T., Melcescu L., Popescu M., Cistelecan M.V., Finite
element analysis of cogging torque in low speed permanent magnets wind
generators, International Conference on Renewable Energies and Power
Quality (ICREPQ'08), 12 14 March 2008 Santander, Spain, INDEX Google
Scholar.
Vis.16. Popescu M., Cistelecan M.V., Melcescu L., Covrig, M., Low Speed
Directly Driven Permanent Magnet Synchronous Generators for Wind
Energy Applications, Clean Electrical Power, 2007. ICCEP '07. International
Conference on , vol., no., pp.784-788, 21-23 May 2007, ISBN: 1-42440632-3, INDEX IEEE Xplore.
Vis.17. Tudorache T., Melcescu L., Paturca, S.V., Finite Element Analysis
of Self-Excited Induction Generator for Isolated Small Power Wind Turbines,
Clean Electrical Power, 2007. ICCEP '07. International Conference on , vol.,
no., pp.656-661, 21-23 May 2007, ISBN: 1-4244-0632-3, INDEX IEEE
Xplore.
Vis.18. Melcescu L., Covrig M., Bostan V., Fociuc A., Dynamic model of
PMSM based on 2D FEM Flux and Torque Computation, Electromagnetic
Fields in Mechatronics, Electrical And Electronic Engineering: Proceedings
of ISEF'05, vol. 27, pp. 406-411, IOS Press, 2006., Baiona, Spain,
September 15-17, 2005, ISSN: 1383-7281, ISBN: 1-58603-627-0, INDEX
Google Scholar.
Vis.19. Paţurcă S. V., Covrig M., Melcescu L., Direct Torque Control of
Permanent Magnet Synchronous Motors (PMSM) – An Approach by Using
Space Vector Modulation (SVM), Proc. of the 6th WSEAS/IASME Int. Conf.
on Electric Power Systems, High Voltages, Electric Machines, Tenerife,
Spain, December 16-18, 2006, Pag. 111-116, ISSN: 1790-5117, ISBN: 9608457-57 2, INDEX Google Scholar.
TOTAL A.2.2
5,00
5,00
5,00
6,67
5,00
6,67
94,00
COD
Nr.
Crt.
A.2.3.1.2
1
A.2.3.1.2
2
A.2.3.1.2
A.2.3.1.2
4
Pn.4. 2005-2008 Contract Excelenţă CEEX Nr. 47/2005: Creşterea
eficienţei energetice în procesele de conversie electromecanică a
energiei prin motoare de curent alternativ (HIGH_EFF), Beneficiar
MEdC AMCIST, Poziţie: Responsabil din partea UPB.
30,00
6
A.2.3.2.2
1
Pn.5. 2006-2008 Contract Excelenţă CEEX 291/2006: Creşterea
eficienţei conversiei electro-mecanice a energiei prin maşini electrice cu
excitaţie hibridă (HYBRID), Beneficiar MEdC AMCIST, Poziţie:
Responsabil din partea UPB.
Pn.6. 2006-2008 Contract Excelenţă CEEX 285/2006: Modele
matematice şi soluţii de proiectare integrată a maşinilor electrice în
scopul utilizării raţionale a resurselor naturale şi artificiale
(PROMEDIU), Beneficiar MEdC AMCIST, Poziţie: Responsabil din
partea UPB.
Pn.7. 2006-2008 Contract CEEX 178/2006 Creşterea cercetării
teoretice si experimentale privind creşterea eficientei conversiei
electromecanice a energiei prin reducerea pierderilor din fierul maşinilor
electrice (PFER), Beneficiar MEdC AMCIST, Poziţie: Membru în
echipa de cercetare.
20,00
20,00
4,00
2
Pn.8. 2007-2010 Contract PNCDI II PARTENERIATE ÎN DOMENII
PRIORITARE 21-075/2007 Sistem hibrid de producere a energiei
electrice utilizând surse regenerabile (SHIELDS), Beneficiar MEdC
CNMP, Poziţie: Membru în echipa de cercetare.
6,00
3
Pn.9. 2006-2008 Contract de excelenţă CEEX 39/2006: Cercetări
complexe privind dezvoltarea de sisteme de conversie a energiei
eoliene cu posibilităţi de conectare la reţea (CCDSE), Beneficiar MEdC
AGRAL, Poziţie: Membru în echipa de cercetare.
4,00
4
Pn.10. 2006-2008 Contract de excelenţă CEEX X2C24/2006, Cercetări
privind sistemul electric de propulsie al unui vehicul cu roţi motoare
independente (SEPRI), Beneficiar MEdC AMTRANS, Poziţie: Membru
în echipa de cercetare.
4,00
TOTAL A.2.3
A2. Activitatea de
cercetare
30,00
20,00
A.2.3.1.2
A.2.3.2.2
30,00
3
5
A.2.3.2.2
PRIORITARE 22-119/2008, Sistem complet de conversie a energiei
eoliene de 200kW la 33 rot/min cu conectare la sistemul energetic
(WEGSYS), Beneficiar MEdC CNMP, Poziţie: Responsabil din partea
UPB.
PRIORITARE 71-137/2007 Sistem de acţionare cu motoare sincrone cu
magneţi permanenţi de mare energie, pentru tracţiune electrică urbană
(AMSTMP), Beneficiar MEdC CNMP, Poziţie: Responsabil din partea
UPB.
Indicator
Kpi
Pn.3 2007-2009 Contract PNCDI II INOVARE 4/2007: Serie de motoare
asincrone cu rotor in scurtcircuit in construcţie capsulare antideflagrantă
cu turaţie reglabilă in limite largi (MAEXTR), Beneficiar MEdC AMCIST,
Poziţie: Responsabil din partea UPB.
A.2.3.1.2
A.2.3.2.2
Contract
COD
Nr.
Crt.
A.2.4.2
1
Publicatie
F.1. 1998 Contract de cercetare Electricité de France, E26/C56531/0:
Simulation magnétodynamiques 3D du transformateur haute -fréquence
3MVA, Poziţie: Membru în echipa de cercetare.
TOTAL A.2.4
168,00
Indicator
Kpi
2,00
2,00
A3. Recunoasterea impactului activităţii
A3. Recunoaşterea impactului activităţii
Cod
3.1
3.1
Articol citat
Ris.2. Tudorache T., Melcescu L., FEM
Optimal Design of Energy Efficient
Induction Machines. Advances in
Electrical and Computer Engineering,
nr.9, pp. 58-64, 2009, Romania, ISSN:
1582-7445, INDEX ISI Thomson Reuters,
WOS:000268723600009, Factor Impact
0,552.
Vis.3. Tudorache T.; Melcescu L.;
Popescu M.; Methods for cogging torque
reduction of directly driven PM wind
generators, Optimization of Electrical and
Electronic Equipment (OPTIM), 2010
12th International Conference on , vol.,
no., pp.1161-1166, 20-22 May 2010,
ISSN: 1842-0133, INDEX ISI
Proceedings Paper Thomson Reuters,
WOS:000291967300173.
Categorie
ISI
ISI
Articol care citeaza
Deaconu Sorin Ioan; Topor Marcel; Popa Gabriel Nicolae; et al., Experimental
study and comparative analysis of transients of induction motor with soft starter
startup, Advances in Electrical and Computer Engineering Volume: 10 Issue:
3 Pages: 27-33, Published: 2010, INDEX ISI Thomson Reuters,
WOS:000281805600005
Ion Catalin Petrea; Marinescu Corneliu, Autonomous Three-Phase Induction
Generator Supplying Unbalanced Loads, Advances in Electrical and Computer
Engineering Volume:13 Issue: 2 Pages: 85-90 Published: 2013,Published:
2010, INDEX ISI Thomson Reuters, WOS:000322179400014
Livadaru L., Simion A., Munteanu A., Cojan M., Dabija O., Dual Cage High
Power Induction Motor with Direct Start-up. Design and FEM Analysis,
Advances in Electrical and Computer Engineering Volume:13, Issue: 2, Pages:
55-58,INDEX ISI Thomson Reuters, WOS:000322179400009
Categorie
Cod
Kpi
ISI
3.1.1
2,50
ISI
3.1.1
2,50
ISI
3.1.1
2,50
Cezar POPA, Radu PENTIUC, High Efficiency Electro-Thermal Converters,
Scientific Bulletin of the Electrical En gineering Faculty – Year 10 No. 3 (14)
ISSN 1843-6188, pp.110-116, INDEX Google Scholar.
BDI
3.1.2
1,50
LAKHOUA M.N., Systemic Analysis of a Wind Power Station in Tunisia, Journal
of Electrical and Electronics Engineering 01/2011; 4. INDEX Google Scholar.
BDI
3.1.2
1,50
P. M. García, V. Moreno, O. Azurza, I. Arrambide, Study of an Outer-Rotor
PMSG for use in Small Wind Applications, International Conference on
Renewable Energies and Power Quality (ICREPQ’12) Santiago de Compostela
(Spain), 28th to 30th March,2012, INDEX Google Scholar.
BDI
3.1.2
1,00
Wang, F., Application and development tendency of PM machines in wind
power generation system,
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society Volume
27, Issue 3, March 2012, Pages 12-24, INDEX SCOPUS
BDI
3.1.2
1,00
BDI
3.1.2
1,00
ISI
3.1.1
1,67
Ahsanullah, K.; Dutta, R.; Rahman, M.F. "Review of PM generator designs for
direct-drive wind turbines", Universities Power Engineering Conference
(AUPEC), 2012 22nd Australasian, On page(s): 1 - 6, Volume: Issue: , 26-29
Sept. 2012, INDEX IEEE Xplore, Scopus
Fleischer, Erik; Hofmann, Wilfried; , "Application of soft magnetic composites in
active magnetic bearings," IECON 2011 - 37th Annual Conference on IEEE
Industrial Electronics Society, vol., no., pp.1770-1775, 7-10 Nov.2011, INDEX
ISI Proceedings Paper Thomson Reuters, WOS:000299032401145
3.1
3.1
Vis.4. Melcescu L., Cistelecan M.V., Popescu M.,
Craiu O., Gheorghe S., Claw-pole line-start
permanent-magnet synchronous motor design
and development, Advanced Electromechanical
Motion Systems & Electric Drives Joint
Symposium, 2009. ELECTROMOTION 2009. 8th
International Symposium on , vol., no., pp. 13-17,
1-3 July 2009, ISBN 978-2-9159-1325-5, INDEX
ISI Proceedings Paper Thomson Reuters,
WOS:000278587400003.
Vis.6. Cistelecan M.V., Popescu M., Melcescu L.,
Tudorache T., Three phase line start claw poles
permanent magnet motor with pole changing
winding, Power Electronics, Electrical Drives,
Automation and Motion, 2008. SPEEDAM 2008,
International Symposium on, vol., no., pp.239243, 11-13 June 2008, ISBN 978-1-4244-1663-9,
INDEX ISI Proceedings Paper Thomson Reuters,
WOS:000259920400042.
ISI
ISI
Ferreira, F.J.T.E.; Baoming, G.; de Almeida, A.T. "Stator winding
connection mode management in line-start permanent magnet motors to
improve their efficiency and power factor", Electrical Machines (ICEM),
2012 XXth International Conference on, On page(s): 775 - 783 , INDEX
IEEE Xplore
BDI
3.1.2
0,60
Ugale, R.T.; Bhanuji, A.; Chaudhari, B.N.; A novel line start permanent
magnet synchronous motor using two-part rotor, TENCON 2009 - 2009
IEEE Region 10 Conference , vol., no., pp.1-5, 23-26 Jan. 2009, INDEX ISI
Proceedings Paper Thomson Reuters, WOS:000279355500139
ISI
3.1.1
1,25
ISI
3.1.1
1,25
ISI
3.1.1
1,25
BDI
3.1.2
0,75
BDI
3.1.2
0,75
BDI
3.1.2
0,75
A.D. Aliabad, M. Mirsalim, Analytic modelling and dynamic analysis of polechanging line-start permanent-magnet motors ,IET Electric Power
Applications, Volume 6, Issue 3, March 2012, p. 149 – 155, DOI:
10.1049/iet-epa.2011.0146, Print ISSN 1751-8660, Online ISSN 1751-8679,
INDEX ISI Thomson Reuters, WOS:000301377800002
Nima Farrokhzad Ershad, Mojtaba Mirsalim, Aliakbar Damaki Aliabad, Linestart permanent magnet motors: proper design for pole-changing starting
method, IET Electric Power Applications, Volume 7, Issue 6, July 2013, p.
470 – 476, DOI: 10.1049/iet-epa.2012.0059, Print ISSN 1751-8660, Online
ISSN 1751-8679, INDEX ISI Thomson Reuters, WOS:000326403400005
Ludwik Antal, Maciej Gwoździewicz, EXPERIMENTAL TESTS OF
PERMANENT MAGNET SYNCHRONOUS MOTOR START–UP ,IZeszyty
Problemowe – Maszyny
Elektryczne Nr 93/2011, pp 131-136, INDEX Google Scholar.
Paweł Zalas, Ludwik Antal, LOW POWER PERMANENT MAGNET
SYNCHRONOUS MOTOR DESIGNED TO SYNCHRONOUS STARTING,
Zeszyty Problemowe – Maszyny Elektryczne Nr 3/2012 (96), pp 125-130,
INDEX Google Scholar.
Zawilak, J. , Energooszczędne silniki elektryczne prądu przemiennego,
Mechanizacja i Automatyzacja Górnictwa 2012 | R. 50, nr 9 | 39--43,
INDEX Google Scholar.
3.1
Vis.16. Popescu M., Cistelecan M.V.,
Melcescu L., Covrig, M., Low Speed Directly
Driven Permanent Magnet Synchronous
Generators for Wind Energy Applications,
Clean Electrical Power, 2007. ICCEP '07.
International Conference on , vol., no.,
pp.784-788, 21-23 May 2007, ISBN: 1-42440632-3, INDEX IEEE Xplore.
BDI
Xu, Y.a , Li, C.b, A new hybrid power configuration in HEV and its driving
BLDC development, Telkomnika Volume 11, Issue 2, February 2013,
Pages 257-264, INDEX SCOPUS.
BDI
3.1.2
0,75
Simion S.V.A., Livadaru L., Irimia N., Lazar F., FEM analysis of a low
speed permanent magnet synchronous machine with external rotor for a
wind generator, Optimization of Electrical and Electronic Equipment
(OPTIM), 2012 13th International Conference on, On page(s): 624 - 629,
INDEX SCOPUS, IEEE Xplore.
BDI
3.1.2
0,75
An Y.-J, Zhao W.-Q., Yuan H, Xue L.-P., Pole width modulation method
of reducing EMF harmonic wave for PM wind generator, Shenyang
Gongye Daxue Xuebao/Journal of Shenyang University of Technology,
Volume 34, Issue 2, March 2012, Pages 131-137, INDEX SCOPUS.
BDI
3.1.2
0,75
Luo L., Yin S., Yang N., Verification of permanent magnet synchronous
generator for stand-alone wind power (Conference Paper), International
Conference on Electrical Machines and Systems, ICEMS 2011; Beijing;
China; 20-23 August 2011; Code 87613, Article number 6073418, INDEX
SCOPUS, IEEE Xplore.
BDI
3.1.2
0,75
Rong F. , Manfeng D., A comparative analysis of two types of rotor
structures for low-speed permanent magnet synchronous generator,
International Conference on Electrical Machines and Systems, ICEMS
2011; Beijing; China; 20 -23 August 2011; Code 87613 Article number
6073748, INDEX SCOPUS, IEEE Xplore.
BDI
3.1.2
0,75
Mapari R.G., Patil S.A., Talage D.B., Wakade D.G., Gear shifting using
Retrofit Automatic Manual Transmission technique in Wind Energy
Conversion System, Sustainable Energy & Environment (ISESEE), 2011
3rd International Symposium & Exhibition in, On page(s): 33 - 35 , INDEX
SCOPUS, IEEE Xplore.
BDI
3.1.2
0,75
Szeidert I., Prostean O., Filip I., Vasar C. Determination of synchronous
generator's efficiency and of wind turbine's mathematical models based
on the usage of regression functions, Intelligent Systems and Informatics
(SISY), 2010 8th International Symposium on, On page(s): 325 - 328 ,
INDEX SCOPUS, IEEE Xplore.
BDI
3.1.2
0,75
3.1
BDI
Deng A.Q.-L., Hong B.S., Xiao C.F., Influence of design parameters on
cogging torque in directly driven permanent magnet synchronous wind
generators, Proceedings - The 12th International Conference on
Electrical Machines and Systems, ICEMS 2009, art. no. 5382866, pp.
643-647, INDEX ISI Proceedings Paper Thomson Reuters,
WOS:000277826700132.
Rossi C., Corbelli P., Grandi G., W-CVT Continuously Variable
Transmission for Wind Energy Conversion System , IEEE Power
Electronics and Machines in Wind Applications (PEMWA 2009), Lincoln,
NE, JUN 24-26, 2009, pp: 62-71, INDEX ISI Proceedings Paper Thomson
Reuters, WOS:000274817100011.
Yanto HA, Lin CT, Hwang JC, Lin SC, Modeling and control of
household-size vertical axis wind turbine and electric power generation
system, International Conference on Power Electronics and Drive
Systems PEDS 2009, Vols 1 and 2, pp. 876-882, INDEX ISI Proceedings
Guo YG, Dou YP, Zhu JG, Lu HY, Jin JX, Numerical Magnetic Field
Analysis and Parameter Computation of a PM Synchronous Generator,
11th International Conference on Electrical Machines and Systems
ICEMS 2008:, pp 2866-2869, INDEX ISI Proceedings Paper Thomson
Reuters, WOS:000265395401235.
He QL, Bao XH, Wang QJ, Analyzing on Structure Parameters for Lowspeed Permanent Magnet Synchronous Generator, PROCEEDINGS of
the 11th International Conference on Electrical Machines and Systems
(ICEMS 2008), VOLS 1- 8, pp. 3060-3063, INDEX ISI Proceedings Paper
Sheeja V., Singh B., Uma R., BESS Based Voltage and Frequency
Controller for Stand Alone Wind Energy Conversion System Employing
PMSG, Industry Applications Society Annual Meeting, 2009. IAS 2009.
IEEE , vol., no., pp.1,6, 4-8 Oct. 2009, INDEX ISI Proceedings Paper
Hsiao CY, Yeh SN, Hwang, JC, A Novel Cogging Torque Simulation
Method for Permanent-Magnet Synchronous Machines, ENERGIES,
Volume: 4, Issue: 12, pp: 2166-2179, Published: DEC 2011 , MDPI AG,
POSTFACH, CH-4005 BASEL, SWITZERLAND, ISSN 1996-1073,
INDEX ISI Thomson Reuters, WOS:000298407400004.
ISI
3.1.1
1,25
ISI
3.1.1
1,25
ISI
3.1.1
1,25
ISI
3.1.1
1,25
ISI
3.1.1
1,25
ISI
3.1.1
1,25
ISI
3.1.1
1,25
Qiu-ling Deng,Shou-dao Huang,Lei Peng, FEM analysis and design on
low speed direct driven permanent magnet generator for wind turbine,
Micromotors, 2009,42(7): 9-12. (in Chinese), INDEX Google Scholar,
CineseInfo, cnki, Wanfang Data
XIN Mao,HAN Li,ZHAO Bin,LUO Ci-yong, Finite Element Analysis of Main
Coefficients in Magnetic Circuit Calculation of Permanent Magnet
Motor(in Chinese), Micromotors Servo Technique, ISSN 1001-6848,
Vol.42, no. 7, pp. 1-5, 2009. INDEX Google Scholar, CineseInfo, cnki,
Wanfang Data.
3.1
BDI
3.1.2
0,75
BDI
3.1.2
0,75
Deng Qiu-ling, LI Chun-ju, XU Zhi-wei, Design of Direct-drive Axial Flux
Permanent Magnet Synchronous Wind Power Generator, Journal of
Hunan Institute of Engineering (Natural Science Edition); 2010, No.20-1,
INDEX Google Scholar, CineseInfo, cnki, Wanfang Data.
BDI
3.1.2
0,75
DENG Qiu-ling, HUANG Shou-dao, LIU Ting, Influence of Design
Parameters on Cogging Torque in Permanent Magnet Synchronous Wind
Power Generator, , Micromotors, 2010,43(7): 9-12. (in Chinese), INDEX
Google Scholar, CineseInfo, cnki, Wanfang Data
BDI
3.1.2
0,75
Ghiţă C., Nedelcu S.,Trifu I., Tudorache T., FINITE ELEMENT ANALYSIS
OF THE USEFUL MAGNETIC FLUX OF A LOW SPEED PMSG, U.P.B.
Sci. Bull., Series C, Vol. 75, Iss. 1, 2013, 239-250, INDEX Google
Scholar, INSPEC.
BDI
3.1.2
0,75
Yuan H., An YJ, An H., Sun D., Xue LP, Analysis of Reducing the
Harmonic Voltage of PM Wind Generator with Pole Width Modulation,
Communications in Computer and Information Science Processing, 1st
International Conference on Communications and Information Processing
(ICCIP 2012), Aveiro, PORTUGAL, MAR 07-11, 2012,Volume: 289, pp.
647-655, INDEX ISI Proceedings Paper Thomson Reuters,
WOS:000312915600077.
ISI
3.1.1
1,25
An Y., Zhao W., Wen H., Liu G., Yuan H., The pole width modulation
method and experiment on reducing the voltage harmonic of PM wind
generator, (2012) Advanced Materials Research, 383-390, pp. 75267532., Document Type: Conference Paper, INDEX Scopus.
BDI
3.1.2
0,75
BDI
3.1
Vis.17. Tudorache T., Melcescu L., Paturca,
S.V., Finite Element Analysis of Self-Excited
Induction Generator for Isolated Small Power
Wind Turbines, Clean Electrical Power, 2007.
ICCEP '07. International Conference on , vol.,
no., pp.656-661, 21-23 May 2007, ISBN: 14244-0632-3, INDEX IEEE Xplore.
S.Vamshi Kumar,P.Raghuvedran,K.Sri Vidya Savithri, Modeling and
Analysis of a Dynamic VAR Compensator for Wind Energy Conversion
System, International Journal of Innovative Science and Modern
Engineering (IJISME) ISSN: 2319 - 6386, Volume 1, Issue 4, March 2013
35, INDEX Google Scholar.
BDI
3.1.2
1,00
3.1
Vis.19. Paţurcă S. V., Covrig M., Melcescu
L., Direct Torque Control of Permanent
Magnet Synchronous Motors (PMSM) – An
Approach by Using Space Vector Modulation
(SVM), Proc. of the 6th WSEAS/IASME Int.
Conf. on Electric Power Systems, High
Voltages, Electric Machines, Tenerife, Spain,
December 16-18, 2006, Pag. 111-116, ISSN:
1790-5117, ISBN: 960-8457-57 2, INDEX
Google Scholar.
Gupta NP, Gupta P, Performance Analysis of Direct Torque Control of
PMSM Drive using SVPWM - Inverter, Conference: IEEE 5th India
International Conference on Power Electronics (IICPE 2012), Delhi
Technol Univ, Delhi, INDIA, DEC 06-08, 2012, INDEX ISI Proceedings
ISI
3.1.1
1,67
TOTAL 3.1
44,18
COD
Nr.
Crt.
1
2
10,00
10,00
4
REVUE ROUMAINE DES SCIENCES TECHNIQUES 2013
Série ÉLECTROTECHNIQUE et ÉNERGÉTIQUE
ROTOR VOLTAGE INFLUENCE ON THE CHARACTERISTICS OF
DOUBLE FED INDUCTION MOTOR
10,00
5
ARTIFICIAL NEURAL NETWORK-BASED ROBUST TRACKING
CONTROL FOR DOUBLY FED INDUCTION GENERATOR USED IN
WIND ENERGY CONVERSION SYSTEMS
10,00
6
A NOVEL MULTI-DRIVE ELECTRIC VEHICLE SYSTEM CONTROL
BASED ON MULTI-INPUT MULTI-OUTPUT PID CONTROLLER
10,00
7
9
10
11
12
13
14
A.3.3.2
10,00
3
8
A.3.3.1
IEEE Transactions on Industrial 2010
Manuscript ID: 10-1384-TIE
Electronics Model Reference Adaptive Control of Five-phase IPM Motors
Based on Neural Network
Investigation of the Parameters Affecting the Optimal Performance of
Permanent Magnet Linear Generators for Wave Energy Converters
Indicator
Kpi
A Novel Criterion to Identify the Overvoltage Source for Machines
Working in Parallel
A.3.3.1
A.3.3.2
Recenzie
15
16
Low Speed Axial Flux PMSM a Possible Magnetisation Function of a
Tooth Coil Winding
ATEE 2011 Topic ID 23
Virtual Instrumentation for Study of Asynchronous
Motor Functional Characteristics
Permanent Magnet Brushless Machine for a Hybrid Electric Scooter
Standard for Frequency Characteristics Measurement at Power
Transformers
Comparative analysis of co-generation structures comprising
suplimentary systems with renewable energy sources
Particularities of Park Transform in Special Cases
The Impact of the Electrical Machines on the Environment
Experimental characterization of electromagnets for particle accelerators
Claw-pole synchronous generator for compressed air energy storage
Method for Determining the Effective Capacity Variation Depending on
the Discharge Current for Lead-Acid Calcium Batteries
TOTAL A.3.3
6,00
10,00
10,00
10,00
10,00
10,00
6,00
6,00
6,00
6,00
140,00
A3. Recunoasterea
impactului activităţii
COD
Nr.
Crt.
Publicatie
Indicator
Kpi
1
Membru în Biroul Departamentului Masini, Materiale si Actionari electrice
2004-2008, 2012-2014
12,00
2
Membru în consiliu Facultaţii de Inginerie Electrică, 2012-2014
4,00
A.3.4.2
TOTAL A.3.4
16,00

Anexa 3 - Universitatea Politehnica din Bucuresti

Transcription

Similar documents

consideraţii privind evoluţia metrologiei ştiinţifice în contextul

Anexa 3 - Universitatea Politehnica din Bucuresti

nr. 10/2011