DIN EN 10217-7

Transcription

DIN EN 10217-7

May 2005
D EUTSCHE NORM
{
DIN EN 10217-7
Supersedes DIN 17457,
July 1985 edition.
ICS 23.040.10; 77.140.75
Welded steel tubes for pressure purposes
Technical delivery conditions
Part 7: Stainless steel tubes
English version of DIN EN 10217-7:2005
Geschweißte Stahlrohre für Druckbeanspruchungen – Technische Lieferbedingungen – Teil 7: Rohre aus
nichtrostenden Stählen
A comma is used as the decimal marker.
National foreword
This standard has been prepared by ECISS/TC 29 ‘Steel tubes and fittings for steel tubes’ (Secretariat: Italy).
The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel
and Iron Standards Committee), Technical Committee Nichtrostende Stahlrohe.
Amendments
DIN 17457, July 1985 edition, has been superseded by the specifications of EN 10217-7.
Normen-Download-Beuth-Viega GmbH & Co. KG-KdNr.6961957-LfNr.2959979001-2005-10-10 16:50
Previous editions
DIN 17440: 1967-01, 1972-12; DIN 17457: 1985-07.
Continued overleaf.
Document comprises 36 pages.
© No part of this standard may be reproduced without the prior permission of
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,
has the exclusive right of sale for German Standards (DIN-Normen).
English price group 16
www.din.de
www.beuth.de
FE
08.05
9646321
EN 10217-7
May 2005
ICS 23.040.10; 77.140.75
English version
Welded steel tubes for pressure purposes
Technical delivery conditions
Part 7: Stainless steel tubes
Tubes soudés en acier pour service
sous pression – Conditions techniques de livraison – Partie 7: Tubes
en aciers inoxydables
Geschweißte Stahlrohre für Druckbeanspruchungen – Technische Lieferbedingungen – Teil 7: Rohre aus
nichtrostenden Stählen
This European Standard was approved by CEN on 2004-10-14.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any
CEN member.
The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,
Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and
the United Kingdom.
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Management Centre: 36, rue de Stassart, B-1050 Brussels
© 2005. CEN – All rights of exploitation in any form and by any means
reserved worldwide for CEN national members.
Ref. No. EN 10217-7:2005 E
Page 2
EN 10217-7:2005
Page
3
4
4
5
5
6
6
6
6
6
6
7
7
7
8
8
8
10
10
11
11
11
15
15
15
15
20
20
20
21
21
21
22
22
22
22
22
25
25
25
25
25
26
26
26
28
28
28
29
29
29
29
30
30
30
Page 3
EN 10217-7:2005
30
30
31
31
31
31
31
32
32
32
33
33
33
33
33
34
34
34
34
34
35
Page 4
EN 10217-7:2005
Page 5
EN 10217-7:2005
Page 6
EN 10217-7:2005
Page 7
EN 10217-7:2005
Page 8
EN 10217-7:2005
Page 9
EN 10217-7:2005
Page 10
EN 10217-7:2005
Page 11
EN 10217-7:2005
Page 12
EN 10217-7:2005
Page 13
EN 10217-7:2005
Page 14
EN 10217-7:2005
Page 15
EN 10217-7:2005
Page 16
EN 10217-7:2005
Page 17
EN 10217-7:2005
Page 18
EN 10217-7:2005
Page 19
EN 10217-7:2005
Page 20
EN 10217-7:2005
Page 21
EN 10217-7:2005
Page 22
EN 10217-7:2005
Page 23
EN 10217-7:2005
Page 24
EN 10217-7:2005
Page 25
EN 10217-7:2005
Page 26
EN 10217-7:2005
Page 27
EN 10217-7:2005
Page 28
EN 10217-7:2005
Page 29
EN 10217-7:2005
Page 30
EN 10217-7:2005
Page 31
EN 10217-7:2005
Page 32
EN 10217-7:2005
Page 33
EN 10217-7:2005
Page 34
EN 10217-7:2005
Page 35
EN 10217-7:2005

DIN EN 10217-7

Transcription

Similar documents

Technische Verfügbarkeit Anmerkung: Die Technische