Page 1-Product Selection Guides-Project Out

Transcription

All Series Windows
Project-Out (Awnings)
2”, 2 1/2”, 3 3/4”, 4 1/2” Frame Depth
http://www.peerlessproducts.com/
Project-Out Series Product Selection Guide
Description
Frame
Depth
Typical
Wall
Thickness
AAMA
Rating
Structural
(PSF)
AIR
(CFM/SF)
0.3 @ 6.24
0.1 @1.57
Water
(PSF)
U-Value
STC
Dual
Glazed
w/ Blinds
Blast
Impact
Sash
Weight
Test
Size
1801
Project-Out Bottom - Awning
2”
.125
AP-AW 100
150
< 0.1
12.0
0.430
36-41
Yes
Yes
No
120
60” x 36”
1805
Fixed over Projected
2”
.125
AP-AW 75
112.5
< 0.1
12.0
0.364
36-41
Yes
Yes
No
120
60” x 99”
1901
4 1/2”
.125
AP-AW 100
150
< 0.1
12.0
0.482
36-41
Yes
Yes
No
120
60” x 36”
1905
4 1/2”
.125
AP-AW 75
112.5
< 0.1
12.0
0.394
36-41
Yes
Yes
No
120
60” x 99”
1201
3 3/4”
.125
AP-AW 90
135
< 0.1
12.0
0.491
38-47
Yes
Yes
No
120
60” x 36”
1205
3 3/4”
.125
AP-AW 95
142.5
< 0.1
12.0
0.422
38-47
Yes
Yes
No
120
60” x 99”
2501
2 1/2”
.125
AP-AW 100
150
< 0.1
12.0
0.443
36-41
Yes
Yes
No
120
60” x 36”
2505
2 1/2”
.125
AP-AW 75
112.5
< 0.1
12.0
0.372
36-41
Yes
Yes
No
120
60” x 99”
Model
Number
*All thermal values were performed with 1” insulated glass consisting of 1/4” TIAC40 (Low-E #2) annealed/ Argon
with TGI Spacer/ 1/4” Clear annealed. All thermal tests performed using in house software recognized by NFRC.
Copyright © 2005 Peerless Products Inc.
2403 S. Main Street · PO Box 431 · Fort Scott, Kansas 66701 · 1-866-420-4000
http://www.peerlessproducts.com
Note: PDF Files & Letter Size Paper = Half Scale
AutoCAD Drawing File = Full Scale
Updated: 05/27/2009
Section: PO
Page #:
1800 and 1900 Series
Project-Out Windows
2” & 4 1/2” Frame Depth
Features:
AAMA standard tested and certified
4 ½” frame depth 1900 & 2” Frame Depth 1800
Master frame wall thickness 0.125”
2” Frame Depth
Vent frame wall thickness 0.125”
Structural thermal breaks
Butt construction and triple overlap screwed master frame corner design
Vents are miter-cut, joined with an extruded aluminum
corner key and mechanically crimped
3 3/16” sightline
Equal length master frame legs
AW 100 Rated
Unique 4-raceway thermal break cavity
design with 1/4” debridging
Thermal break debridging is not exposed
2” vent depth
Santoprene bulb weather-stripping
1” sealed insulating glass per ASTM E 2190-02
Aluminum glazing beads with Santoprene bulbs
Heavy-duty stainless steel 4-bar Anderberg type hinges
12 lb Sill
with friction adjustment
Cast white bronze cam type locking handles
Friction adjuster/limit device
Manufactured on 1/8” increments
Kynar 2605 finish in 25 standard colors.
Options:
Integral mulling of awning (POB), hopper (PIT), casements and fixed in same master frame
All commercially available glazing materials
1 3/8” insulating glass
1 3/8” glass pocket for glazing exterior applied grids and maintains 1” insulating glass
Single glazing
Between-the-glass muntins
Exterior-applied muntins in 4 different widths
¼”, 1”, 1 3/8” 1 ½” insulated panels
Split sash designs with dual glazing to accommodate polycarbonate glazing
Split sash designs to accommodate 5/8” depth between the glass blinds
Roto-operators – butt hinges are used with this option
Custodial locks (key operated)
Multi-point locks
Life safety opening limiter
Egress hinges with or without washability
Extruded aluminum butt hinges with stainless steel pin
and nylon bushings in lieu of the standard 4-bar hinges
Strap anchors to facilitate installation in new construction
4 1/2” Frame Depth
Various structural mullions for joining
multiple windows in an opening
Receptor Systems
Standard and custom panning systems
Interior trim systems
AW 100 Rated
Sub-sills
Applied interior or interior wicket-type screens
Charcoal colored fiberglass (standard) aluminum,
stainless steel or solar screen mesh
Custom colors, 2603 Flurocryl, 2604 Kynar and anodized finishes.
2” vent depth
12 lb Sill
Updated: 09/10/2009
Section: PO
Page #:
2500 Series
Project-Out Windows
Features:
AAMA standard tested and certified
2 ½” frame depth 2500 series
Master frame wall thickness 0.125”
Vent frame wall thickness 0.125”
Structural thermal breaks
Butt construction and triple overlap screwed master frame corner design
Vents are miter-cut, joined with an extruded aluminum
corner key and mechanically crimped
3 3/16” sightline
Equal length master frame legs
design with 1/4” debridging
Thermal break debridging is not exposed
Aluminum glazing beads with Santoprene bulbs
Heavy-duty stainless steel 4-bar Anderberg type hinges
with friction adjustment
Cast white bronze cam type locking handles
Friction adjuster/limit device
Options:
Integral mulling of awning (POB), hopper (PIT), casements and fixed in same master frame
1 3/8” insulating glass
1 3/8” glass pocket for glazing exterior applied grids and maintains 1” insulating glass
Single glazing
Between-the-glass muntins
Exterior-applied muntins in 4 different widths
¼”, 1”, 1 3/8” 1 ½” insulated panels
Split sash designs with dual glazing to accommodate polycarbonate glazing
Split sash designs to accommodate 5/8” depth between the glass blinds
Roto-operators – butt hinges are used with this option
Custodial locks (key operated)
Multi-point locks
Life safety opening limiter
Egress hinges with or without washability
Extruded aluminum butt hinges with stainless steel pin
and nylon bushings in lieu of the standard 4-bar hinges
Preparation for Clearline type operators (awnings and hoppers)
Strap anchors to facilitate installation in new construction
Various structural mullions for joining
multiple windows in an opening
Receptor Systems
Standard and custom panning systems
Interior trim systems
Sub-sills
Applied interior or interior wicket-type screens
Charcoal colored fiberglass (standard) aluminum,
stainless steel or solar screen mesh
Updated: 03/02/2009
Section: PO
Page #:
1200 Series
Project Out Window
3 3/4 ” Frame Depth
Features:
Continuous Frame Design
Frames Mechanically Fastened
STD Equal Length frame legs
AAMA tested and certified
design with 1/4” de-bridging
Thermal break de-bridging is not exposed
Adjustable stainless steel 4-bar Anderberg hinges
Cast white bronze cam-type locking handles
Push-pull operation
Aluminum glazing beads with Santoprene bulb seals
AW 90
3 1/4” glazing pocket
allows for many
glazing options
Options:
12 lb sill
Dual Glazing Insulated & Monolithic for glazing and polycarbonate (or acrylic)
Hinged Interior Access Panels
Between-the-Glass Blinds (1”, 5/8”)
Unequal or extended leg frames available
3 ¼” Glazing pocket to accommodate various glaze combinations.
Between-the-glass, exterior-applied and true muntins
Roto-Operators
Custodial Locks (key-operated)
Life Safety opening limiter
Egress hinges, keyed limited, in hinge flatbar limit stop.
3 piece structural mullions
Subsills, Sill starter, Alcoa Sills
Receptor, panning and interior trim systems
Fiberglass (standard), aluminum, stainless steel or solar screen mesh
Updated: 03/02/2009
Section: PO
Page #:
All Series Windows
Project-Out (Awnings)
2”, 2 1/2”, 3 3/4”, 4 1/2” Frame
Hardware & Glazing Tables
Locking Hardware
1800’s
1900’s
1200’s
2500’s
White Bronze Cam Lock
O
O
O
O
White Bronze Pole Ring Sweep Lock
O
O
O
O
SS. 4-Bar Hinges
X
X
X
X
SS. Egress 4-Bar Hinges
O
O
O
O
SS. Loose Rivet Hinges (for Roto’s Only)
O
O
O
O
Keyed Released Limit Arms (5”, 6”, 8”, 10”, 12”)
O
O
O
O
Bronze Roto Operator (Sash Size Limitation)
O
O
O
O
White Roto Operator (Sash Size Limitation)
O
O
O
O
Silver Roto Operator (Sash Size Limitation)
O
O
O
O
Hinges
Operating Hardware
X = Standard
O = Optional
N/A = Not Available
* Number of Locks per Sash is Dependent upon size of sash
Single Glazed / IGU’s / Panels
1800’s
1900’s
1200’s
2500’s
1/8” - 1/4”
X
X
X
X
5/8”
X
X
5/8” w/ Ext Grid
X
X
X
X
5/8” w/ Int/Ext Grid
X
X
X
X
1”
X
X
X
X
1” w/ Ext Grid
X
X
X
X
1 3/8”
X
X
X
X
1 5/8”
X
X
X
X
X
X
Dual Glazed
1/8” - 1/4” Int/Ext
X
(5/8” w/ Ext Grid) - 1/4”
X
(1”) - 1/4”
X
(1” w/ Ext Grid) - 1/4”
X
Updated: 02/04/2009
X
Section: PO
Page #:

Page 1-Product Selection Guides-Project Out

Transcription

Similar documents

Page 1 -Product Selection Guides-Casements

We are air... - Peerless Products

Casement Series Product Selection Guide

Casement - Peerless Products, Inc.

UFC / ATFP Windows