Neo Series

neoseries
Innovative Solutions for Electronic Manufacturing
2.2
neoplatform
The Neo platform has been designed to supply the
electronics market with a wide range of systems
capable of automating manual processes that, in many
cases, tended to make unprofitable those production
areas considered as high-cost.
Osai presents the Neo platform, comprising flexible,
fast and reliable systems, capable of supplying a highly
competitive service on the market.
The Neo system body guarantees high stability and
rigidity, offering a strong base with which it is possible
to achieve high performances in terms of speed and
accuracy.
The metallic frame houses the instrument required by
each system in modular racks, installed on standard
rails, that enable easy shifting and rapid inspection.
page
1
2.2
neoseries
p. 010-11
p. 04-5
YAG or CO2 marking systems for high productions
System for high-speed, precision assembly of
odd-form components.
p. 06-7
p. 012-13
System suitable for all subcontractors, capable of
Modular system for assembling odd-form
performing marking operations with YAG and CO2
components for high productivities.
sources simultaneously.
p. 08
Entry-level marking system, able to carry out CO2
marking on automatic lines.
p. 09
page
2
2.2
p. 014-15
Neorouter modula is the best solution for
the ones who wants to carry out mechanical
separation of the boards’ panels.
p. 016-17
Measures the main spectrometric characteristics
Automatic system for LASER depanelling of multi
of LEDs, quickly and precisely, marking them on the
plate boards. Depanellizes without mechanical
PCB.
stresses on components adjacent to the cut, with
high precision and considerably reduced costs.
p. 018-19
feeders & grippers
p. 023-37
System for LASER cutting of Kapton and flexible
The range of feeders developed by Osai enables
circuits.
fast, reliable handling of components.
Carries out extremely precise, rapid separations.
p. 020-21
on-line systems
p. 038-39
The progressive miniaturizing of electronic boards,
The Neo systems platform enables production
together with the use of ever-smaller components
lines to be developed for assembling boards or
has necessitated the development of more and
finished products.
more innovative selective soldering processes.
accessories
p. 040-41
The Neo series is accompanied by a range of
accessories implementable on new or
already-installed systems.
This means that the system potentials can be
enhanced to respond to the client’s specific needs.
page
3
2.2
A marking system particularly suitable for high
productions and for high density multiplates.
The complete absence of mechanical handling
devices for the LASER shifting enables high definition
markings to be carried out with a saving of up to
60% of the writing time compared with traditional
marking systems.
YAG
DIMENSIONS
CO2
L 1,200 - D 1,310 - H 1,800 mm
WEIGHT
WORKING AREA
400 x 400 mm
SAFETY CLASS
ACCESS TO THE WORKING AREA
LASER POWER
page
2.2
Frontal door with optical filter
30 W
40 W
SPOT LASER
0.180 mm
(7 mils)
0.250 mm
(10 mils)
MAN/MACHINE INTERFACE
Through PC with LCD monitor and keyboard.
Console with set-up buttons.
SYSTEM MANAGEMENT SOFTWARE
4
320 x 320 mm
CLASS 1 (EN60825-1)
Intuitive and graphic interfaced with the company information
system to communicate coding and production data
CONFIGURATIONS
• Optical station to check double marking quality in fix position
OPTIONS
• Smoke with activated carbon exhauster
• Manual or in line load and unload system
• Connection with DB
V i d e o
NMK-00
YAG on gold
YAG on copper
scribing
trimming
CO2 virage
barcode
deflashing
plastic marking
page
5
2.2
An excellent marking system for EMS (subcontractors)
who have to carry out YAG and/or CO2 markings of
middle lot production with only one machine.
Configuration of the YAG and/or CO2 sources is not
fixed and can be chosen on installation or successively
on-field.
Furthermore the TWIN architecture also allows CO2
and YAG marking to be carried out simultaneously on
the same product.
YAG
DIMENSIONS
CO2
L 1,000 - D 1,600 - H 1,400 mm
WEIGHT
WORKING AREA
480 x 480 mm
SAFETY CLASS
ACCESS TO THE WORKING AREA
LASER POWER
20 W
30 W
SPOT LASER
0.100 mm
(4 mils)
0.150 mm
(6 mils)
MAN/MACHINE INTERFACE
Through PC with LCD monitor and keyboard.
Console with set-up buttons.
SYSTEM MANAGEMENT SOFTWARE
page
6
2.2
CLASS 1 (EN60825-1)
Frontal door with optical filter
Intuitive and graphic, interfaced with the company information
system to communicate coding and production data
CONFIGURATIONS
• Optical station to check marking quality and fiducial position
OPTIONS
• Smoke with activated carbon exhauster
• In line load and unload system
• Code reading for identification of the board and loading, marking
configuration
• Connection to DB
V i d e o
NMT-00
C02 virage
7
page
YAG removal of
solder-resist
2.2
V i d e o
This is the entry-level solution for production lines, able
to guarantee high quality marking at reduced prices.
Its programming, simple and easy of use in production,
make it an easy and quick system to implement in any
production cycle.
NME-00
DIMENSIONS
L 650 - D 1,000 - H 1,500 mm
LASER SOURCE
CO2
WEIGHT
SAFETY CLASS
CLASS1 (EN60825-1)
ACCESS TO THE WORKING AREA
Frontal hatch
WORKING AREA
Head Galvo 250 x 250 mm
LASER POWER
30 W
0.25 mm
(10 mils)
SPOT LASER
MAN/MACHINE INTERFACE
Through PC with LCD monitor and keyboard
Intuitive and graphic, interfaced with the company information
system to communicate coding and production data
SOFTWARE AND CONTROL FEATURES
page
8
2.2
OPTIONS
•
•
•
•
Smoke with activated carbon exhauster
Optical station to check marking quality
Second stop for marking area expansion
Connection to DB
V i d e o
analyses quickly and accurately the main
spectrometric characteristics of LEDs and marks
them on the PCB by means of CO2 or YAG LASER
source, in order to supply an essential visual support
during the task of final assembly.
All the measurements carried out – light intensity
NMO-00
[cd], light flow [lm], main and peak wavelength [nm],
colour coordinates and colour temperature – are then
memorized in the internal system DB or sent via email.
The simple programming, together with the optoelectronic adaptors developed by Osai allow it to be
used in production, with fast times and reduced costs,
for any type of LED.
YAG
DIMENSIONS
CO2
L 1,000 - D 1,600 - H 1,400 mm
WEIGHT
WORKING AREA
480 x 480 mm
SAFETY CLASS
LASER POWER
Frontal door with optical filter
20 W
30 W
SPOT LASER
0.100 mm
(4 mils)
0.150 mm
(6 mils)
MAN/MACHINE INTERFACE
Through PC with LCD monitor and keyboard.
Console with set-up buttons.
SYSTEM MANAGEMENT SOFTWARE
INSTRUMENT SPECIFICATIONS
Intuitive and graphic, interfaced with the company information
system to communicate coding and production data
Colour coordinates accuracy ± 0.002
Wavelength accuracy ± 2 hm
CONFIGURATIONS
• Optical station to check marking quality and fiducial position
OPTIONS
• Code reading for identification of the board and loading, marking
configuration
• Smoke with activated carbon exhauster
• In line load and unload system
• Connection with DB
9
page
ACCESS TO THE WORKING AREA
CLASS 1 (EN60825-1)
2.2
The rotating head can be equipped with grippers for traditional and special components, paste or
resin dispensers or specific processing systems.
Fast the 4/8 tools multi-head can load the components in sequence, reducing the shifting and gripper
change times.
Qualitative precision and repeatability, combined with the insertion control, make the Neoplace a high
quality and reliable system.
Reduced costs the placing of non-standard components combined with optional operations, such as
the fluids dispensing unit and the high dynamics, make the Neoplace an excellent investment.
DIMENSIONS
L 1,200 - D 1,310 - H 1,800 mm
WEIGHT
TOTAL WORKING AREA
400 x 400 mm
Z AXIS STROKE
150 mm
Through PC with LCD monitor and keyboard.
Console with set-up buttons.
MAN/MACHINE INTERFACE
Intuitive and graphic, interfaced with the company information
system to communicate coding and production data
SOFTWARE AND CONTROL FEATURES
Axial strip, Radial strip, Stick, Vibrators, Tapedreel,
Bulk, Foil, Blister or Special devices
COMPONENT FEEDERS
AVAILABLE AXES
4 with brushless motors
MAX. ACCELERATION
1.5 m/sec2
MAX. SPEED
60 m/min
POSITIONING ACCURACY
± 50 μm (single axis)
POSITION REPEAT PRECISION
15 μm (single axis)
HEAD ROTATION SPEED
OPTIONS
page
10
2.2
180° / sec
•
•
•
•
•
Sensorized clamps to check component’s presence
Active clinching system
Passive clinching system
In line load and unload system
Connection with DB
V i d e o
NPC-00
page
11
2.2
Neoplace modula 304 is the optimum solution wherever
is required the assembling of a limited number of different
components and a high production performance.
The compact mechanical structure makes possible to use the
requested configuration and production performance. Each
neoplace modula 304 is a system fully integrated in order to
create a modular, flexible assembly line.
The fast and easy set-up, together with the wide range of OSAI
feeders and grippers, guarantees the necessary flexibility asked
for production that need sudden configuration changes.
DIMENSIONS
NPM-00
L 900 - D 1.560+(1.050) - H 1.650+(230) mm
WEIGHT
TOTAL WORKING AREA
300 x 300 mm
Z AXIS STROKE
120 mm
MAN/MACHINE INTERFACE
Touchscreen-Monitor and Joypad
SOFTWARE AND CONTROL FEATURES
Intuitive and graphic interfaced to the company information system to
communicate coding and production data
COMPONENT FEEDERS
axial feeder, radial feeder, stick feeder, bulk feeder,
tapereel feeder, tray feeder, feeding of foil or pre-punched stripes,
customized special feeder
AVAILABLE AXES
2 linear motors plus 1 brushless motor for each head
MAX. ACCELERATION
up to 25 m/sec2
MAX. SPEED
up to 150 m/min
POSITIONING ACCURACY
± 10 μm (single axis)
POSITION REPEAT PRECISION
5 μm (single axis)
HEAD ROTATION SPEED
OPTIONS
page
12
2.2
4 x 360° / sec
•
•
•
•
•
•
•
•
•
Vision system to debug mount- points and for fiducial points check
Video camera from below to verify position of components and pin presence
Sensorized clamps to verify components’ insertion force
Second head
Automatic clamp change
Active clinching system
Passive clinching system
In line load and unload system
Connection with DB
1.650
(230)
OPERATOR WORKING
AREA
V i d e o
1.560
(1.050)
OPERATOR
WORKING
AREA
13
page
900
2.2
Neorouter modula is the best solution for the ones who wants to carry out mechanical separation of the
boards’ panels. Is an extremely recommended system for the ones who need to separate high volumes
of boards but, thanks to its main characteristic of not requiring any product speciaalisation (except for
the gripper), ensures in absolute the lower cost also for high mix and low volumes productions.
The router separation tool, equipped with cyclic run-out check by LASER system, is able to verify the
deterioration of the tool, replacing it automatically in the fullness of time without machine stops or
operator’s interventions.
DIMENSIONS
L 900 - D 1.560 - H 1.650+(230) mm
WEIGHT
TOP AXIS MOVEMENT
400(X) mm x 680(Y) mm
TOP AXIS TYPE
2 linear motors
BOTTOM AXIS MOVEMENT
350(X) mm x 320(Y) mm
BOTTOM AXIS TYPE
2 brushless motors
AXIS Z (HEAD) MOVEMENT
120 mm & 360°
HEAD AXIS TYPE
2 brushless motors
MAX ACCELERATION
Up to 25 m/sec2 (top axis)
MAX SPEED
Up to 150 m/min (top axis)
POSITIONING ACCURACY
± 10 μm (single top axis)
POSITIONING REPEATABILITY
5 μm (single top axis)
TOTAL WORKING AREA
300 x 300 mm up to 490(X) mm [*]
PCB DIMENSIONS
Up to 490(X) mm x 340(Y) mm [*]
UNLOADING SYSTEM TYPES
Tape, Double Tape (Pass & Fail), Tray-Feeder, Blister or Custom
BLISTER EXTERNAL DIMENSIONS
Up to 400(X) mm x 280(Y) mm [*]
BLISTER WORKING AREA
Up to 350(X) mm x 240(Y) mm [*]
TAPE WIDTH
110 mm / 250 mm / 400 mm [*]
MAN/MACHINE INTERFACE
Touchscreen-Monitor and Joypad
Intuitive and graphic interfaced to the company information system to
communicate coding and production data
SOFTWARE AND CONTROL FEATURES
OPTIONS
page
14
2.2
•
•
•
•
•
•
•
Vision system for fiducial check and proggramation
Video camera for optical position check
Sensorized clamps to verify components’ insertion force
Second head
Automatic Tool Change
In line load and unload system
DB Connection
[*] The value can be different and have to be checked with constructor in fase of configuration and according with product characteristics.
V i d e o
NRM-00
The modula platform provides to neorouter the inborn capability to carry out automatic handlings to move the boards
separated in thermoformed or to put them in appropriate cases on pallets, in fact carrying out the final assembly without
asking for the purchase of additional stations.
The simple and quick set-up with the wide range of grippers and tools, provides to the client a remarkable advantage in
terms of flexibility and productivity.
CONFIGURABLE OUTPUT
BLISTER
TAPE
15
page
PALLET
2.2
LASER cutting, based on the Osai innovating LASER Cut
Technology, can perform clean and safe cutting without
producing dust and mechanical stress on the electronic
components.
LASER depanelling is the best way to obtain rapid cutting
(cutting times reduced by up to 70% compared with
traditional methods) and flexible cutting (cutting of PCB
junctions or complete PCBs with a thickness of up to 3 mm
for the basic version).
DIMENSIONS
L 1,200 - D 1,350 - H 1,800 mm
WEIGHT
WORKING AREA
400 x 400 mm
SAFETY CLASS
CLASS 1 (EN60825-1)
CUTTING SPEED
2.5 m/min
CUTTING WIDTH
0.100 mm
BOARD THICKNESS
up to 3 mm
Frontal drawer with inspection window
(in-line option and/or with automatic board handling)
ACCESS TO THE WORKING AREA
Through PC with LCD monitor and keyboard.
Console with set-up buttons.
MAN/MACHINE INTERFACE
Intuitive and graphic, interfaced with the company information
system to communicate coding and production data
SYSTEM MANAGEMENT SOFTWARE
LASER SOURCE
CO2
LASER POWER
70 W
OPTIONS
page
16
2.2
•
•
•
•
•
Smoke with activated carbon exhauster
In line load and unload system
Check Fiducial position
Connection with DB
2D code reader for PCB identification
V i d e o
NCT- 00
page
17
2.2
Continual reductions in component sizes make the depanelling
of flexible circuits, Kapton and films in general a more and more
complex task.
neocut UV performs very high accuracy cutting operations, without
mechanical stresses on components.
As well as supplying an exceptional solution in depanelling Kapton
and flexible PCBs, the neocut UV system carries out marking of
printed circuits and plastic surfaces.
Easy programming, that can also be carried out off-line, enables
the neocut UV system to be used both for preproduction and for
mass production.
UV
DIMENSIONS
GREEN
L 1,000 - D 1,600 - H 1,400 mm
WEIGHT
WORKING AREA
480 x 480 mm
SAFETY CLASS
ACCESS TO THE WORKING AREA
LASER POWER
4W
10 W
KERF
0.025 mm
(1 mils)
0.050 mm
(2 mils)
MAN/MACHINE INTERFACE
Through PC with LCD monitor and keyboard.
Console with set-up buttons.
SYSTEM MANAGEMENT SOFTWARE
page
18
2.2
CLASS 1 (EN60825-1)
Frontal door with LASER light filter
Intuitive and graphic, interfaced with the company information
system to communicate coding and production data
CONFIGURATIONS
• Optical station to check marking quality and fiducial position
OPTIONS
• Smoke with activated carbon exhauster
• In line load and unload system
• Code reading for identification of the board and loading, marking
configuration
• Connection to DB
V i d e o
NCU-00
page
19
2.2
The progressive miniaturizing of electronic boards, together with the use of
ever-smaller components has necessitated the development of more and more
innovative selective soldering processes.
carries out reliable and rapid selective LASER soldering or remelting.
The innovative closed loop control system in temperature ensures the absence of
thermal stress on the components which, especially in the case of power LEDs or
sensors, require particular attention in the assembly phase.
The simple programming of the software, which can also be used offline, enables
welding programs to be developed quickly for different boards. The system SW
also allows carried out soldering profiles to be memorized, supplying a valuable
tool for end-traceability.
DIMENSIONS
L 1,200 - D 1,310 - H 1,800 mm
WEIGHT
TOTAL WORKING AREA
400 x 400 mm
SAFETY CLASS
CLASS 1 (EN60825-1)
Through PC with LCD monitor and keyboard.
Console with set-up buttons.
INTERFACCIA UOMO \MACCHINA
Intuitive and graphic, interfaced with the company information
system to communicate coding and production data
SYSTEM MANAGEMENT SOFTWARE
POSITION REPEAT PRECISION
± 15 μm
HEAD ROTATION SPEED
180° / sec
LASER SOURCE
Diode
LASER POWER
50 W
TIN WIRE DIAMETER
OPTIONS
page
20
2.2
0.5 to 1.5 mm (interchangeable)
•
•
•
•
•
•
•
•
Soldering smokes exhauster
Preheating station
Optical control system to verify fiducial position
Soldering or flux paste dispenser
Soldering wire power supply system
Double drawer manual load and unload
In line load and unload system
Connection with DB
V i d e o
NST-00
Power LED soldering
Copper Pin soldering
Connector soldering
Copper Pin assembly
and soldering
Flex PCB soldering
Copper soldering
on PCB
21
page
Power LED soldering
2.2
page
22
2.2
neotrayfeederlinear
Tray type
Mini Tray, Jedec Tray
Tape width
NTL-00
55 a 100 mm
Feeder dimensions
100 mm
Quick clamping system
Feed rate
3,600 trays/hour
Weight
8.5 kg
page
23
2.2
neoradialfeeder
Taping type
pitch 12.7 mm
NRF-500
Other on demand
Rheophore diameter
0.4 to 1.1 mm
Feeder dimensions
100 mm
Quick clamping system
Component feed rate
3,600 comp./hour
Weight
8.5 kg
Cutting knife
NRF-00
00-NRF-2900
Component types
Capacitors, varistors,
transistors, LED
page
24
2.2
neoaxialfeeder
Taping type
between 5 and 15 mm
Tape width
NAF-500
55 to 100 mm
Rheophore diameter
0.4 to 1.4 mm
Feeder dimensions
100 mm
Quick clamping system
Component feed rate
3,600 comp./hour
Weight
8.5 kg
NAF-00
Customized Kit
00-NAF-2900
Component types
resistors, diodes, capacitors
page
25
2.2
neotapedreelfeeder
Taping type
Thermoformed tape and reel
Feeder dimensions
TRF-00
From 16 to 72 mm
NFI-500
Tapedreel interface needed
Quick clamping system
Component feed rate
3,600 comp./hour
Weight
NFI-00
8 kg (TRF-00)
Tapedreel Interface
It enables the interfacing of the Osai bank feeder
with the Hover Davis, Siemens, Fuji feeders, etc
Interface dimensions
Component types
Connectors, terminals,
switches, shields, clips, etc
100 - 200 mm
Quick clamping system
Feeder capacity
max. 8
page
26
2.2
neostickfeeder
Packaging type
Plastic (DIN IEC 60286) or cardboard tube or stick
Tube dimensions
Width: 8 to 30 mm
Height: 8 to 35 mm
Length: 380 to 560 and 480 to 660 mm
NSF-00
Autonomy / Capacity
10-35 tubes
Feeder dimensions
100 mm
Quick clamping system
Component feed RATE
3,600 comp./hour
Weight
NLF-00
8.5 kg (NSF-00)
25 kg (NLF-00)
Component types
connectors, relays, transformers, displays,
switches, shields, IC, T0 220, etc.
page
27
2.2
neocoil feeder
It enables the trimming and/or
pre-forming of some metallic parts
such as fast-ons, pin, clips, contact foils,
terminals, etc.
Feeder dimensions
100 mm
Quick clamping system
Component feed rate
1,800 parts/hour
NCF- 00
Weight
20 kg
Coil support
Max. diameter 1.000mm
Coil power decoiler
Paper tape coiler
End-tape control sensor
Foil types
page
28
2.2
Feed flexing control sensor
neobulk feeder
NBF-00
Packaging type
Loose components
Operational autonomy
NLF-00
NLF-300
100 to 1,500 parts
Feeder dimension
100 mm
Quick clamping system
Component feed rate
3,600 comp./hour
Component types
connectors, terminals, switches,
capacitors, clips, etc.
Weight
40 kg (NBF-00)
25 kg (NLF-00)
page
29
2.2
neotray feeder
DIMENSIONS
L 811 - D 798 - H 2,184 mm
WEIGHT
MAN/MACHINE INTERFACE
PACKAGING TYPE
BLISTER DIMENSION
MAX BLISTER WEIGHT
Touch screen panel and specific buttons
on the frontal column
Thermoformed blisters, cardboard, polystyrene
max 400x600 mm
18 Kg
OPERATIONAL AUTONOMY
11+1+11 blisters
COMPONENT FEED RATE
3,600 comp./hour
CONFIGURATIONS and/or OPTIONS
Universal metallic tray dimensions 400 x 600 mm neolink feeder
NTF-00
NTA-00
page
30
2.2
NFL-00
Component types
transformers, inductors, connectors,
power ralay, special components
page
31
2.2
neoformingtool
The Forming Tools, mounted on feeders or in the
stand-alone version, offer a precious solution when
it comes to mounting pre-formed components or
special machining.
Component pre-forming and pin cutting
Mosfet, connectors, inductors,
raised resistance, buttons, clips, etc
Polarization
LED, diodes, etc
Electric test
LED, transformers, capacity, inductors, etc
Optical test
LED, display, etc
Dimensional control
Height and connector pin presence, pin parallelism
display, etc
page
32
2.2
NLF-300
page
33
2.2
neogrippers
Parallel
Gripper
2.2
Change Tool
Pick & Place Head
page
34
Dispense Head
Vacuum
Gripper
Tilt
Gripper
NGP-00
Parallel Gripper
Suitable for the grip of components with parallel and flat surfaces
CONNECTORS - CAPACITORS BOX - FUSE HOLDER – RELAY
NGA-00
Axial Gripper
Customized Gripper
Suitable for the grip and preshaping of axial components
Suitable for the grip of custom components
or with big dimensions
DIODES - RESISTANCES - CAPACITORS
PRINTED CIRCUITS - SPECIAL COMPONENTS
NGV-00
Vacuum Gripper
RELAY - FERRITES - PLANE CONTACTS
35
page
Suitable for the grip of components with flat upper side
2.2
neoclinch plate
Features of the clinch plate
Good centering and clamping, thanks to constant PCB
stress during PTH assembly.
Planarity and absence of flexion of the board because
the clinching pins have a double function: flat section
for board support/contrast and inclined section for
NEO-28-00
rheophore bending.
No breakages during the pre-engraving of the
multiplates in the event of incorrect assembly
(crooked rheophore or wrong positioning).
No bending with heavy components, such as
transformers and inductors.
Featuring: aluminum support plate, board centering
pins and pins for rheophore clinching, implemented
Eventual SMD components are not subjected to stress.
The non-clinched components are not “disassembled”.
specifically for each version of board to be assembled.
Selective clinching of rheophores positioned in areas
covered by SMD components, because the clinching
pins can be conformed and positioned so as not to
interfere with such SMD components.
ø3
45°
35°
25°
18mm
page
36
2.2
neofeeders center
Quick and reliable solution
for stock management and control
NFC-00
The Neofeeders Center is a system designed for rapid
configurations of the feeders outside the line.
It supplies an optimal ergonomic support for feeders,
and allows the operator to perform easily ordinary
maintenance and setup operations.
MAN/MACHINE INTERFACE
LOADING CAPACITY
COMPONENT FEEDING
L 1,454 - D 880 - H 1,035 mm
Touch screen panel integrated in the front part
6 Axial feeders or
6 Radial feeders or
4 Linear feeders or
4 Bulk feeders
Automatic or step by step
37
page
DIMENSIONS
2.2
On-line systems
The Neo systems platform enables to develop
production lines for assembling boards or finished
products.
The use of equipment based on the same
mechanical (axis handling), electrical (motion
control and rack) and SW characteristics, allows a
single operator to manage the complete production
process and the maintenance tasks.
In addition, each line can be accessorized with a
supervision and traceability system that has been
developed within Osai and can be customized
according to the client’s specific needs.
page
38
2.2
page
39
2.2
accessories
optiondrawers
Neo platform systems, if in manual mode,
are available in two versions:
one drawer
double drawer
to maximize the working area to 400 x 400mm
To optimise board loading/unloading times
NEO-45-00
page
40
2.2
NEO-45-00
option neovision
Neovision is the optical system which is able to
carry out checks on marked codes and their relative
qualities, hexadecimal character codes, specific logos
and the
presence or absence of components.
Easy to use and with immediate programming, it
allows the carrying out of the right check for any
specific requirement.
Check on characters (OCV)
IDmatrix or Bar Code reader with quality control
Comparison of images
Neovision provides an optimal solution when optical
checks are required in accordance with specific
machining, and without needing inspection systems
or additional control stations.
41
page
NVS-00
2.2
service assistant
Experience in the automation of production cycles has
led to the creation of a software that is able to monitor
the in-line or stand-alone machines.
It provides periodical information, signals or alarms for
the following:
Preventive maintenance
Periodical replacements
Gauging
Updating
Breakdowns
The messages can be sent through a local network
(LAN) or by e-mail to the person in charge who can
react just in time.
The Service Assistant is a real assistant who is able to
monitor all the systems 24 hours a day.
page
42
2.2
OSA-00
protrace
Versatile and complete traceability system which is
OPT-00
able to store all the information relative to the product
industrial process in a standard or customized data
base.
Developed to be connected to the Osai systems, it
can be extended to all the stations and machines of a
production line or to the whole plant.
Protrace is the professional solution for tracing the
whole manufacturing process in order to carry out
the required corrective actions on the line, as well as
to ensure that the end customer is supplied with the
complete information.
page
43
2.2
Osai automation systems
Osai A.S. was founded in 1991 with the target of
building special machineries for assembly and final
testing of components for automotive, electrical
appliances industries and the electro-technical industry.
Osai A.S. produces also special machineries for
assembly, standard machines for electronics and
standard and special LASER machineries.
Osai A.S. headquarter is located in the ancient
“Parella Papermill”, a building that has a centuries-old
architectural history.
Within these walls, technicians and designers apply
every day extremely evolved technologies to supply
innovative solutions to the market.
OSAI A.S. Srl
Via Cartiera, 4 - 10010 Parella (TO)
ITALY
Tel: +39 0125 66.83.11
Fax: +39 0125 66.83.01
www.osai-as.it - [email protected]