Buses Jets

ASYBCO
JETS / BUSES
SPRAY NOZZLES / NOZZLES
SPRAY NOZZLES
Bex
Nozzle
NPT
Pipe Size
1/8 F
1/4 F
3/8 F
1/2 F
3/4 F
1F
1 1/4
1 1/2 F
2F
Length L
Dim. A
(Inches)
(Inches)
13/16
7/16 HEX
15/16
9/16 HEX
1 3/16
11/16 HEX
1 5/16
7/8 HEX
1 11/16 1 1/16 HEX
2 1/2
1 3/8 HEX
3 5/8
1 3/4 dia.
4 1/4
2 dia.
5
2 3/8 dia.
SPRAY CHARACTERISTICS
TYPICAL APPLICATIONS
Suitable for a variety of washing and spraying applications.
F series spray nozzles produce a flat, fan-shaped spray pattern, with
spray angles available from 15o to 110o measured at 40 psi. Spray
angles generally increase with pressure.
Parts cleaning •
Foam control •
Gravel washing •
Fertilizer spraying •
Spray density tapers off toward the outside of these sprays, to permit overlapping of spray patterns while maintaining uniform spray
density.
Metal wash •
Asphalt spraying •
Vehicle washing •
Dishwashers •
CONSTRUCTION
A Flow Stabilizer may be required where nozzles are installed close
to elbows or tees.
The models listed are machined from bar stock, and are one piece
construction. Standard materials are brass, mild steel, 303 stainless
steel, and 316 stainless steel. Some models are also stocked in
Carpenter 20, PVC, CPVC, and polypropylene. NPT male threads
are standard. Also available with BSPT male threads.
SPRAY NOZZLES
Bex
Series F • Solid Stream
TYPICAL APPLICATIONS
For situations where maximum impact is required over a very
small target area.
• Metal wash
• Mixing
• Agitation
CONSTRUCTION
The models listed are machined from bar stock, and are one piece
construction. Standard materials are brass, steel, 303 stainless steel,
and 316 stainless steel.
SPRAY CHARACTERISTIC
A high impact solid stream.
Nozzle
NPT Length L Dim. A
Pipe Size (Inches) (Inches)
1/8 F
1/4 F
3/8 F
1/2 F
3/4 F
1F
1 1/4 F
13/16
15/16
1 3/16
1 5/16
1 11/16
2 1/2
3 5/8
7/16 HEX
9/16 HEX
11/16 HEX
7/8 HEX
1 1/16 HEX
1 3/8 HEX
1 3/4 HEX
1 1/2 F
2F
4 1/4
5
2 Dia.
2 3/8 Dia.
BEX
Series F • Flat “V”
Bex
SPRAY NOZZLES
Series STF • Flat “V”
BEX
TYPICAL APPLICATIONS
The STF series are designed for applications where space is at a
minimum, or where the nozzles must not protrude from the header.
Typically, the outer surface of the nozzle is flush with the outside of
the header. (NOTE: Certain models will protrude slightly.)
CONSTRUCTION
The STF are disc-shaped, with a male 5/8 - 18 straight thread. They
are machined from bar stock, and are one piece construction.
Standard
materials are 303 stainless steel, and 316 stainless steel. Some models are also available in other materials.
SPRAY CHARACTERISTICS
STF spray nozzles produce a flat, fan-shaped spray pattern, similar
to the F series. Spray angles are available from a 0o solid stream to
90o,
measured at 40 p.s.i. Spray angles generally increase with pressure,
as shown in the capacity table below.
Spray density tapers off toward the outside of these sprays, to permit overlapping of spray patterns while maintaining uniform spray
density.
Bex
SPRAY NOZZLES
Series FL • Flooding Nozzles
TYPICAL APPLICATIONS
SPRAY CHARACTERISTIC
Wherever a low impact, wide angle flat spray is required
• Rinsing and cooling
• Fertilizer spraying
• Dishwashing
• Metal wash
CONSTRUCTION
The models listed are machined from bar stock, and are one poece
construction. Standard materials are brass, 303 stainless steel, and
316 stainless steel. Some models are also available in other materials, such
as PVC, CPVC, Teflon, and poplypropylene.
A wide, flat fan-shaped spray with low impact. The spray is deflected 75o away from the centerline of the pipe connection, as shown.
A very wide angle flat-fan shaped spray with low impact.
SPRAY NOZZLES
Bex
Series ABO • Air Blow-Off
BEX
SPRAY CHARACTERISTICS
ABO series air blow-off nozzles project a flat fan-shaped curtain of
gas in a direction parallel to the axis of the nozzle/nozzle body.
Gases most commonly used are air and steam. ABO nozzles are
designed with large maximum free passage sizes to reduce clogging
and minimize the effects of minor tip damage.
CONSTRUCTION
ABO assemblies comprise a body, a retaining cap, and a nozzle tip.
Standard materials are brass, 303 and 316 stainless steel. Other
materials are available upon request
TYPICAL APPLICATIONS
Debris removal
Cleaning and drying of parts
• Cooling of components/parts
• Small gas curtains
SPECIAL FEATURES
• Large maximum free passage
• Wider, more uniform coverage
• Easy assembly/disassembly and cleaning
SPRAY NOZZLES
Dimensions (Inches)
Model Pipe Size Overall
Number (NPT) Length (L)
1/8 ABO
1/8
1.77
1/4 ABO
1/4
1.83
3/8 ABO
3/8
1.90
Bex
Series FP • High Impact Flat
TYPICAL APPLICATIONS
• High impact applications
• Gravel washing
SPRAY CHARACTERISTICS
• Metal wash
• Vehicle washing
CONSTRUCTION
The models listed are machined from bar stock, and are one piece
construction. Standard materials are brass, 303 stainless steel,
and 316 stainless steel.
A flat and thin fan-shaped spray with sharp definition on all edges.
This spray delivers very high impact over the area covered. The
spray is deflected by angle D away from the centerline of the spray
nozzle.
Bex
SPRAY NOZZLES
BEX
Series FS, Full Cone • Larger Size
TYPICAL APPLICATIONS
• Chemical processing
• Foam breaking
• Coke quenching
• Gravel washing
• Cooling sprays
• Heat exchanger cooling
• Absorption stack spraying
Dimensions (Inches)
Nozzle
Dim
Dim
Size
A
L
1 1/4 FS 1 7/8 Diam. 3 1/2
1 1/2 FS 2 1/4 Diam. 4 1/4
2 FS
2 3/4 Diam. 4 1/4
2 1/2 FS 3 5/8 Diam.
7
3 FS
4 Diam.
7 /34
4 FS
5 Diam.
9 /78
CONSTRUCTION
All the models listed have a female NPT connection, and consist of
a one piece body plus an internal insert.Standard materials are
machined 316 stainless steel, or cast 316 stainless steel.
SPRAY CHARACTERISTICS
Full cone spray pattern, with uniform distribution throughout the
cone.
Bex
SPRAY NOZZLES
Series HNS • Vaneless Full-Cone
TYPICAL APPLICATIONS
Wherever a medium to coarse full-cone spray is required from a
nozzle with larger maximum free passage.
CONSTRUCTION
Standard materials are brass, 303 stainless steel, and 316 stainless
steel. Other materials are available upon request.
SPRAY CHARACTERISTICS
The HNS series vaneless full-cone nozzle projects a medium to
coarse full-cone spray in a direction perpendicular to the nozzle
inlet axis. The maximum free passage in this nozzle is substantially
larger than most full-cone nozzles due to the “vaneless” design. This
nozzle is suitable for applications where a relatively coarse full-cone
spray is required, and where standard full-cone nozzles are subject
to plugging.
Model
Number
1/4 FHNS
3/8 FHNS
1/2 FHNS
Dim
A
.94
1.0
1/4
Dimensions (Inches)
Dim Dim
Model
C
L
Number
.50
1.2
1/4 HNS
.56
1.4
3/8 HNS
.75
1.9
1/2 HNS
Dim Dim
A
C
.94
.50
1.1
.63
1/4
.75
Dim
L
1.2
1.5
1.9
SPRAY NOZZLES
Bex
Series S, GS, HGS • Full Cone
S SERIES
One piece body + removable insert
Spray characteristics
Full cone spray pattern, with
uniform distribution throughout
the cone.
GS SERIES
Dimensions - Inches
Nozzle
Dim
Dim
Size
A
L
1/8 GS
5/8 HEX
1 5/16
1/4 GS 11/16 HEX
1 9/16
3/8 GS 13/16 HEX
1 11/16
1/2 GS
1 HEX
2
1/8 FGS
5/8 HEX
1 9/32
1/4 FGS 11/16 HEX
1 21/32
3/8 FGS 13/16 HEX
1 15/16
1/2 FGS
1 HEX
2 3/32
Two piece body + removable insert
HGS SERIES
Dimensions - Inches
Nozzle
Dim Dim Dim Dim Dim
Size
A
B
C
D
L
1/8 HGS 23/32 11/16 5/8 SQ 1 1/32
1
1/4 HGS 29/32 1 3/4 SQ 1 9/32 1 3/8
3/8 HGS 1 1/32 1 1/167/8 SQ 1 15/321 17/32
1/2 HGS 1 3/16 1 3/8 1 SQ 1 11/16 1 7/8
1/8 FHGS 21/32 11/16 1/2 SQ 29/32 31/32
1/4 FHGS 29/32 1 3/4 SQ 1 9/32 1 3/8
3/8 FHGS1 1/32 1 3/327/8 SQ 1 15/321 17/32
1/2 FHGS1 3/16 1 3/8 1 SQ 1 11/16 1 7/8
SPRAY NOZZLES
Two piece body + removable insert
Sprays at right angle to pipe
Construction
This nozzle contains a patented
insert with larger flow passages
than older styles, and is less
susceptible to clogging. Standard
materials are brass, 303 stainless
steel and 316 stainless steel. Some
models are also stocked in PVC,
CPVC and polypropylene.
Typical Applications
• Cooling sprays
• Chemical processing
• Continuous casting
• Foam breaking
Bex
Series SW, GSW, HGSW • Wide Angle Full Cone
SW SERIES
Dimensions - inches
Male Dim. Dim. Female Dim. Dim.
SW
A
L
FSW
A
L
HEX
1/8
7/16 13/16 3/4 1 1/4 HEX 2 3/8
1/4
9/16 15/16
1 1 1/2 HEX 2 1/2
3/8 11/16 1 1/16 1 1/4
2 HEX 3 1/2
1/2
7/8 1 7/16 1 1/2 2 1/4 Diam 4 1/4
3/4 1 1/4 1 11/16
2 2 3/4 Diam 5 7/8
1
1 3/8 2 1/16 2 1/2 3 1/2 Diam 6 1/2
3
4 Diam 7 3/4
4
5 Diam 10 1/2
One piece / insert
A wide angle full cone spray pattern, with uniform distribution
throughout the cone.
Construction
GSW SERIES
Dimensions - Inches
Nozzle
Dim
Dim
Size
A
L
1/8 GSW
5/8 HEX
1 5/16
1/4 GSW 11/16 HEX
1 9/16
3/8 GSW 13/16 HEX
1 11/16
1/2 GSW
1 HEX
2
1/8 FGSW
5/8 HEX
1 9/32
1/4 FGSW 11/16 HEX
1 21/32
3/8 FGHW 13/16 HEX
1 15/16
1/2 FGHW
1 HEX
2 3/32
Two piece / insert
Dimensions - Inches
Dim Dim Dim Dim Dim
A
B
C
D
L
SQ
1/8 HGSW 23/32 11/16 5/8 1 1/32
1
1/4 HGSW 29/32 1 3/4 1 9/32 1 3/8
3/8 HGSW 1 1/32 1 1/16 7/8 1 15/32 1 17/32
1/2 HGSW 1 3/16 1 3/8 1 1 11/16 1 7/8
1/8 FHGSW 21/32 11/16 1/2 29/32 31/32
1/4 FHGSW 29/32 1 3/4 1 9/32 1 3/8
3/8 FHGSW 1 1/32 1 3/32 7/8 1 15/32 1 17/32
1/2 FHGSW 1 3/16 1 3/8 1 1 11/16 1 7/8
Two piece / insert
Nozzle
Size
Spray characteristics
This nozzle contains a patented
insert with larger flow passages
than older styles, and is less susceptible to cloging. Standard
materials are brass, 303 stainless
steel and 316 stainless steel. Some
models are also stocked in PVC,
CPVC and polypropylene.
Typical Applications
Anywhere a wide angle full cone
spray is required
HGSW SERIES
• Cooling sprays
• Chemical processing
• Continuous casting
BEX
Dimensions - Inches
Nozzle
Dim
Dim
Size
A
L
1/8 S
7/16 HEX
13/16
1/4 S
9/16 HEX
15/16
3/8 S
11/16 HEX
1 1/16
1/2 S
7/8 HEX
1 9/32
3/4 S 1 1/16 HEX
1 9/16
3/4 FS
1 3/8 HEX
2 1/16
1S
1 1/4 HEX
2 3/16
1 FS
1 5/8 Dim.
2 5/8
Bex
SPRAY NOZZLES
Series SQ, GSQ • Full Square
SPRAY CHARACTERISTICS
BEX
TYPICAL APPLICATIONS
• Chemical processing
• Continuous casting
• Cooling sprays
Full cone spray pattern, with uniform distribution throughout
the approximately square cone.
CONSTRUCTION
Standard materials are brass, 303 and 316 stainless. Larger sizes in
cast 316 or 303 stainless bar. Some models are also stocked in plastics
and other materials.
GSQ SERIES
SQ SERIES
Full square cone:
Two piece body + removable insert.
Full square cone:
One piece body + removable insert.
Dimensions (Inches)
Nozzle
Dim
Dim
Size
A
L
1/8 SQ
7/16 HEX 13/16
1/4 SQ
9/16 HEX 15/16
3/8 SQ 11/16 HEX 1 1/16
1/2 SQ
7/8 HEX 1 7/32
3/4 SQ
7/8 HEX 1 7/32
1 FSQ 1 1/2 HEX 2 5/8
1 1/4 FSQ 1 7/8 Diam 3 1/2
1 1/2 FSQ 2 1/4 Diam 4 1/4
2 FSQ 2 3/4 Diam 5 7/16
2 1/12 FSQ 3/12 Diam 6 7/8
Dimensions (Inches)
Nozzle
Dim
Dim
Size
A
L
1/8 GSQ
5/8 HEX 1 5/16
1/4 GSQ 11/16 HEX 1 9/16
3/8 GSQ 13/16 HEX 1 11/16
1/2 GSQ
1 HEX
2
1/8 FGSQ 5/8 HEX 1 9/32
1/4 FGSQ 11/16 HEX 1 21/32
3/8 FGSQ 13/16 HEX 1 15/16
1/2 FGSQ
1 HEX 2 3/32
Bex
SPRAY NOZZLES
Series SWSQ • Wide Angle Full Square
TYPICAL APPLICATIONS
For applications where a wide angle is required
• Cooling sprays
• Continuous casting
• Chemical processing
CONSTRUCTION
Standard materials are brass, 303 and 316 stainless steel. Some
models are also stocked in other materials.
SPRAY CHARACTERISTICS
Full cone wide angle spray pattern, with uniform distribution
throughout the approximately square cone.
Nozzle
Size
1/4 SWSQ
3/8 SWSQ
1/2 SWSQ
3/4 FSWSQ
3/4 SWSQ
1 FSWSQ
1 SWSQ
1 1/4 FSWSQ
1 1/2 FSWSQ
2 FSWSQ
2 1/2 FSWSQ
3 FSWSQ
Dimensions (Inches)
Dim
A
11/16 HEX
11/16 HEX
7/8 HEX
1 1/4 HEX
1 1/16 HEX
1 1/2 HEX
1 3/8 HEX
1 7/8 Diam.
2 1/4 Diam.
2 3/4 Diam.
3 5/8 Diam.
4 Diam.
Dim
L
15/16
1 3/16
1 7/16
2 3/16
1 11/16
2 5/8
2 1/16
3 3/4
4 1/4
5 7/8
6 1/2
7 3/4
SPRAY NOZZLES
Bex
BEX
Series CCS • Full Cone
TYPICAL APPLICATIONS
Suitable for temperature control applications, where the volume of
sprayed coolant can be adjusted without significantly affecting
spray coverage. This enables the user to maximixe heat transfer efficiency while avoiding loss of coverage area. CCS nozzles feature an
internal insert which will not come loose in environments which are
subjet to thermal cycling.
• Continuous casting and billet casting
• Rinsing and cooling
• Heat exchanger cooling
• Chemical processing
CONSTRUCTION
CCS nozzles are machined from bar, and consist of a one piece
body, plus a non removable insert. Standard material is brass.
SPRAY CHARACTERISTICS
Full cone spray pattern with a distribution that is heavier in the
middle. Spray angle remains nearly constant at pressures between
15 an 80 p.s.i.
Dimensions (Inches)
Nozzle
Dim
Dim
Size
A
L
1/4 CCS 9/16 HEX 15/16
3/8 CCS 11/16 HEX 1 3/16
SPRAY NOZZLES
Bex
Series H • Hollow Cone
TYPICAL APPLICATIONS
• Air and gas washing
ers
• Cooling tunnels
• Aerating
• Dust suppression
• Rinsing
• Industrial wash-
• Roof cooling
• Spray ponds
• Metal Treatment
• Degreasing
• Humidifying
• Brine spraying
CONSTRUCTION
The models listed are machined from bar stock, and are two piece
construction. Standard materials are brass, 303 stainless steel,
and 316 stainless steel. Some models available in other materials.
SPRAY CHARACTERISTICS
A hollow cone spray pattern, emerging at right angles to the centerline of the pipe connection. The standard included angle of the
spray cone is 70o at 10 psi. At low pressures hollow cone nozzles
produce medium size,uniform droplets. At Higher pressures finer
droplets are produced.
At 40 psi, a hollow cone spray pattern with smaller droplet size
Nozzle
Size
1/8 H
1/4 H
3/8 H
1/2 H
3/4 H
Dim
A
11/16
15/16
1
1 3/8
1 9/16
Dimensions (Inches)
Dim Dim
Female
C
L
Model
3/8
1
1/8 FH
1/2 1 1/4
1/4 FH
9/16 1 3/8
3/8 FH
3/4 1 7/8
1/2 FH
7/8 2 1/4
3/4 FH
Dim Dim Dim
A
C
L
11/16 3/8
1
15/16 1/2 1 1/4
1 1/8 5/8 1 1/2
1 3/8 3/4 1 7/8
1 5/8 7/8 2 1/4
Bex
SPRAY NOZZLES
BEX
Series HW • Wide Angle Hollow Cone
Nozzle
Size
1/8 HW
1/4 HW
3/8 HW
1/2 HW
3/4 HW
Dim
A
11/16
15/16
1
1 3/8
1 9/16
Dimensions (Inches)
Dim Dim
Female
Dim Dim Dim
C
L
Model
A
C
L
3/8
1
1/8 FHW 11/16 3/8
1
1/2 1 1/4
1/4 FHW 15/16 1/2 1 1/4
9/16 1 3/8
3/8 FHW 1 1/8 5/8 1 1/2
3/4 1 7/8
1/2 FHW 1 3/8 3/4 1 7/8
7/8 2 1/4
3/4 FHW 1 5/8 7/8 2 1/4
SPRAY CHARACTERISTIC
TYPICAL APPLICATIONS
A hollow cone spray pattern, similar to the BEX H Series, but with
wider spray angles. The included angle of the spray cone is 120o at
10 PSI.
Water cooling •
Air cooling •
Roof cooling •
Air washing •
CONSTRUCTION
The models listed are machined from bar stock, and are two piece
construction. Standard materials are brass, 303 stainless steel, and
316 stainless steel. Some models are also available in other materials.
Bex
SPRAY NOZZLES
Series PH • Hollow Cone Phosphating
CONSTRUCTION
Two piece construction. Available in 303 stainless steel,
and 316 stainless steel.
SPRAY CHARACTERISTICS
A hollow cone spray pattern for phosphating applications. This
large droplet, low impingement type of spray results in a tighter and
more
consistent phosphate crystalline structure.
SPRAY NOZZLES
Bex
TYPICAL APPLICATIONS
Model
1R
1 1/4 R
1 1/2 R
2R
2 1/2 R
A
2
2 1/8
2 3/8
2 3/4
3 1/2
Dimensions (Inches)
B
C
D
2 1/8
1/8
1 1/8
2 1/4
1/2
1 1/4
3
9/16
1 3/4
3 7/8
1
2 1/4
4 3/4
1 1/8
2 3/4
At 1 psi
Wide spray angle with large
droplets and minimal misting
L
2 3/4
3 1/8
3 3/4
4 3/4
4 3/4
Aeration & pollution control •
Cooling coil •
Cooling ponds •
Dust proofing •
Chemical processes •
Scrubbing and washing gasses and fumes •
At 15 psi
CONSTRUCTION
Uniform distribution with larger flow rates..
One piece cast construction. Standard material is 316 stainless steel.
All the R series nozzles have a female NPT pipe connection.
Bronze and cast iron available on a limited, special order basis.
SPRAY CHARACTERISTICS
A high capacity hollow cone spray pattern with uniform distribution. The large body and orifice diameters minimize clogging.
SPRAY NOZZLES
Bex
Series ILH • In-Line Hollow Cone
TYPICAL APPLICATIONS
• Dust supression
• Roof cooling
• Aerating
• Spray ponds
• Brine spraying
• Metal treatment
• Humidification
CONSTRUCTION
ILH series nozzles have large maximum free passage diameters to
reduce the possibility of clogging. Interchangeable nozzles caps
allow for
maximum flexibility, and are easily removed for cleaning or inspection. The recessed mounting characteristics of this nozzle result in
minimum protrusion from the liquid supply header or fitting.
Standard materials of construction for ILH series nozzles are brass,
and 303 or 316 stainless steel. Other body cap materials are available upon request.
SPRAY CHARACTERISTICS
ILH series in-line hollow-cone spray nozzles produce a very evenly
distributed hollow-cone spray which emerges through the center
axis of the nozzle body. At lower pressures, these nozzles produce
medium sized, uniform droplets. Finer droplets are produced at
higher pressures.
Dimensions - Inches
Model
Dim
Dim
Number
A
L
3/8 ILH
.94
.50
1/2 ILH
1,0
.56
3/4 ILH
1.4
.75
1 1/2 ILH
1.4
.75
Dim
H
1.2
1.4
1.9
1.9
BEX
Series R • High Capacity Hollow Cone
Bex
SPRAY NOZZLES
Series C • Hydraulic Atomizing
BEX
SPRAY CHARACTERISTIC
C STYLE
C series hydraulic atomizing nozzles are designed and precision
machined to provide a very fine hollow-cone spray using only the
liquid pressure for atomizing.
Two-piece body with removable
cap, orifice insert, core,
and core retainer.
TYPICAL APPLICATIONS
CC STYLE
• Humidification/moisture addition
• Steam de-superheating
One-piece body with removable
orifice insert, core,
and core retainer.
CONSTRUCTION
• Evaporative cooling
Several different styles of nozzle are available in brass, 303 and 316
stainless steel. The orifice insert, core, and strainer are supplied in
316 stainless steel as standard.
CL STYLE
SPECIAL FEATURES
Two-piece body with removable
cap, orifice insert, core, core
retainer, and strainer.
• Very fine hollow-cone spray
• Easy disassembly/assembly and cleaning
• Wide range of styles and sizes
CM.5L STYLE
Nozzle Type
1/4 FCL
1/4 CL
1/4 FCM .5L
1/4 CM .5L
1/4 FC
1/4 C
1/4 CC
1/2” NPT male wallmount body
with removable cap, orifice
insert, core, core retainer, and
strainer.
Dimensions - Inches
L.O.A*
Body
1 15/16
13/16 HEX
2 1/8
13/16 HEX
1 7/8
13/16 HEX
2 1/32
13/16 Dia
1 15/16
11/16 HEX
1 13/32
11/16 HEX
27/32
9/16 HEX
*Length over all
Bex
Cap
11/16 HEX
11/16 HEX
5/8 HEX
5/8 HEX
11/16 HEX
11/16 HEX
---
SPRAY NOZZLES
Series CW • Wide angle Hydraulic Atomizing
CW STYLE
Two-piece body with removable
cap, orifice insert, core, and
core retainer.
SPRAY CHARACTERISTIC
CW series wide angle hydraulic atomizing nozzles are designed and
precision machined to provide a very fine wide angle hollow-cone
spray using only liquid pressure for atomizing.
TYPICAL APPLICATIONS
CCW STYLE
One-piece body with removable
orifice insert, core,
and core retainer.
• Humidification/moisture addition
• Steam de-superheating
• Evaporative cooling
CONSTRUCTION
CWL STYLE
Two-piece body with removable
cap, orifice insert, core, core
retainer, and strainer.
Several different styles of nozzle are available in brass, 303 and 316
stainless steel. The orifice insert, core, and strainer are supplied in
316 stainless steel as standard.
SPECIAL FEATURES
CWM.5L STYLE
1/2” NPT male wallmount body
with removable cap, orifice
insert, core, core retainer, and
strainer.
• Very fine hollow-cone spray
• Easy disassembly/assembly and cleaning
• Wide range of styles and sizes
SPRAY NOZZLES
Bex
BEX
Series TWK • Rotating
APPLICATIONS
SPECIAL FEATURES
The TWK series rotating nozzles provide true 360 degree spray coverage in a very compact assembly. The bearing mechanism is selflubricating and self-cleaning. This nozzle can be installed in any orientation and is effective in vessels up to 3 meters (10 feet) in diameter. The maximum recommended operating pressure is 100 psi at
180oF.
CONSTRUCTION
Model
Number
1/4TWK36050
1/4TWK27050
1/4TWK07250
3/8TWK36075
3/8TWK27075
3/8TWK07275
1/2TWK360100
1/2TWK270100
1/2TWK072100
3/4TWK360180
3/4TWK270180
3/4TWK072180
TYPICAL APPLICATIONS
Keg washing •
Spray tank washing •
Machine Clean-In-Place (C.I.P) •
Standard nozzle body material is 316 stainless steel. Nozzle balls
are available in 316stainless steel, PVDF (Kynar), Teflon, and
poplypropelene. Other body and ball materials are
available upon request.
Pipe
Max
Sanitary
Size
Free
Tubing
N.P.T Passage
Size**
Female inches O.D. inches
1/4
.063
1/2
1/4
.063
1/2
1/4
.063
1/2
3/8
.063
5/8
3/8
.063
5/8
3/8
.063
5/8
1/2
.063
3/4
1/2
.063
3/4
1/2
.063
3/4
3/4
.088
1
3/4
.088
1
3/4
.088
1
True 360 degree coverage •
Easy disassembly/assembly and cleaning •
FDA approved materials •
Keyed ball can not be installed backwards •
Carboy / jug washing •
Small tank rinsing •
Barrel washing/rinsing •
Capacity - G.P.M* At Various Pressures - p.s.i.
5
PSI
1.8
1.8
1.8
2.7
2.7
2.7
3.5
3.5
3.5
6.4
6.4
6.4
7
PSI
2.1
2/1
2.1
3.1
3.1
3.1
4.2
4.2
4.2
7.5
7.5
7.5
10
PSI
2.5
2/5
2.5
3.8
3.8
3.8
5.0
5.0
5.0
9.0
9.0
9.0
15
PSI
3.1
3/1
3.1
4.6
4.6
4.6
6.1
6.1
6.1
11.0
11.0
11.0
20
PSI
3.5
3/5
3.5
5.3
5.3
5.3
7.1
7.1
7.1
12.7
12.7
12.7
**Add prefix “S” (ie. S1/4TWK36050) to model number for Sanitary Connection
30
PSI
4.3
4/3
4.3
6.5
6.5
6.5
8.7
8.7
8.7
15.6
15.6
15.6
40
PSI
5.0
5/0
5.0
7.5
7.5
7.5
10.0
10.0
10.0
18.0
18.0
18.0
50
PSI
5.6
5/6
5.6
8.4
8.4
8.4
11.2
11.2
11.2
20.1
20.1
20.1
60
PSI
6.1
6/1
6.1
9.2
9.2
9.2
12.2
12.2
12.2
22.0
22.0
22.0
80
PSI
7.1
7/1
7.1
10.6
10.6
10.6
14.1
14.1
14.1
25.5
25.5
25.5
100
PSI
7.9
7/9
7.9
11.9
11.9
11.9
15.8
15.8
15.8
28.5
28.5
28.5
Spray
Coverage
degrees
360
270
270
360
270
270
360
270
270
360
270
270
Dim
Dim Dim
“A”
“L” “D”
inches inches inches
1.0
2.0
3/8
1/0
2/0
3/8
1.0
2.0
3/8
1.25
2.5
3/8
1.25
2.5
3/8
1.25
2.5
3/8
1.5
2.9
3/8
1.5
2.9
3/8
1.5
2.9
3/8
2.0
3.9
1/2
2.0
3.9
1/2
2.0
3.9
1/2
*All Reference to G.P.M mean U.S.G.P.M
Bex
TANK WASHING ASSEMBLY
Series TWA
BEX
APPLICATIONS
This assembly is suitable for a variety of tank washing applications
where the maximum tank diameter is no greater than approximately
10 feet. The assembly will pass through a tank opening
of at least 4.1” in dia.
CONSTRUCTION
The assembly is available in brass, 303 and 316 stainless steel. A 1
1/2” female N.P.T. connection attaches to the supply line. Maximum
recommended operating pressure is 60 psi.
SPRAY CHARACTERISTICS
This unit provides a fixed, non-rotating spray pattern. The assembly
body has 13 individual female N.P.T. nozzle connection which are
designed to accept full cone nozzles. For best results, select
‘S’ series full cone spray nozzles. A wide variety of flow
rates are available.
Bex
CLUSTER NOZZLE ASSEMBLY
Series M7S
APPLICATIONS
The M7S series cluster nozzle uses an array of seven (7) GS style
full-cone spray nozzle caps mounted on a cluster nozzle body to
produce a full-cone spray. Multiple full-cone spray nozzle caps provide a relatively small droplet size for large flow rates. Nozzle caps
are easily removed for cleaning or nozzle change-out. Each nozzle
cap contains a patented vane insert with larger flow passages than
other styles, and is, therefore, less susceptible to clogging. Insert
vanes are easy to remove and replace if required.
TYPICAL APPLICATIONS
Chemical processing •
Cooling sprays •
Stack gas scrubbers •
CONSTRUCTION
Dimensions (Inches)
Model
Dim
Dim
Number
A
L
3/4 M7S
2.4
2.1
1M7S
2.9
2.5
1 1/2 M7S
4.1
3.4
Standard cluster nozzle body and cap materials are Brass, 303 stainless steel and 316 stainless steel. Other body and cap materials are
available upon request.
SPECIAL FEATURES
Large flowrates with relatively small droplet size •
Removeable nozzle caps and vane inserts •
Bex
BEX
FLANGED ADJUSTABLE JOINTS
Model
Number
1/8 x 1/8
1/4 x 1/8
1/4 x 1/4
3/8 x 1/4
3/8 x 3/8
1/2 x 1/2
1/2 x 3/4
3/4 x 1/2
3/4 x 3/4
Inlet
Pipe Size
N.P.T.
1/8 male
1/4 male
1/4 male
3/8 male
3/8 male
1/2 male
1/2 male
3/4 male
3/4 male
Outlet
Pipe Size
N.P.T.
1/8 female
1/8 female
1/4 female
1/4 female
3/8 female
1/2 female
3/4 female
1/2 female
3/4 female
Maximum
Dim. A Dim B. Angle of
(Inches) (Inches) Adjustment
1 3/4
1
60o
1 3/4
1
60o
1 3/4
1
60o
1 3/4
1
60o
1 3/4
1
45o
2 1/2
1 1/2
50o
2 1/2
1 1/2
50o
2 5/8
1 1/2
50o
2 5/8
1 1/2
40o
APPLICATIONS
Use adjustable jonts to rotate and tilt spray nozzles, to obtain a
desired positioning of a spray pattern, without having to disturb
surroundind
piping. Adjustable joints may also be used within piping systems as
an adjustable union type connection. Maximum recommended
operating pressure is 120 p.s.i.
CONSTRUCTION
The unit consist of a male inlet section and a female outlet section,
held together by a flange assembly. The locking screws on the flange
assembly may be loosened to change the angle of adjustment
between the inlet and outlet sections. Standard materials are brass
and 303 or 316 stainless steel with 304 stainless steel flanges.
ASYBCO
PISTOLET HAUTE PRESSION
PISTOL GRIP
STRAIGHT STYLE
Catégorie de Buses
Code
Buse Radiale
Buse Radiale Extra
Buse Radiale Carbure
Buse FMC
Buse Tortue
Buse FLR
Buse à Graisse
Buse à Dégeler
Buse J7 Penetretor
Buse Manix
Buse J4 Radial Vortex
Buse à Sable
RS
RE
RC
FM
TO
FL
GR
DE
PE
MA
RV
SA
Buse à Jets Inversés
Buse Rotative
Buse Accessoires
IN
RO
AC
ASYBCO
BUSES
Classification Selon le Nombre de Jet
Lettre Jets Arrières
A
5
B
6
C
7
D
3
E
6
F
8
G
6
H
12
I
J
6
K
8
L
5
M
N
O
8
P
12
Q
3
R
7
S
3
T
U
4
V
6
W
6
X
6
Y
6
Z
Jets Avant
1
1
1
3
1
Jets de Côté
Allen Screw Avant 1” Femelle Avant
Jets Rotatifs Arrière
Jet Rotatifs de Côté
2
2
4
4
1
3
1
1
1
7
6
1
1
8
2
4
BUSES RADIALES • RS STANDARD
Modèle
NPT GPM PSI Nombre de Jets Diamètre Angle Matériel
RSQ451/803
1/8
3
2K
3 Jets Arrières
.030
45
RSQ201/403
1/4
3
2K
3 Jets Arrières
.030
20
BR.
BR.
RSQ301/403
1/4
3
2K
3 Jets Arrières
.030
30
S.S. + BR.
RSQ451/403
1/4
3
2K
3 Jets Arrières
.030
45
S.S. + BR.
RSJ301/4058
1/4
5.8
2K
6 Jets Arrières
.030
30
S.S.
RSJ451/4058
1/4
5.8
2K
6 Jets Arrières
.030
45
S.S.
RSS301/4037
1/4
3.7
2K
3 Jets Arrières
1 Jet Avant
.030
.025
30
0
S.S.
RSS451/4037
1/4
3.7
2K
3 Jets Arrières
1 Jet Avant
.030
.025
45
0
S.S.
BR.
Modèle
NPT GPM PSI
Qt. de Jets
1/8
8
2K
6 Jets Arrières
1 Jet Avant
1/32
1/32
35
0
S.S.
RSB351/816
1/8
16
2K
6 Jets Arrières
1 Jet Avant
3/64
1/32
35
0
S.S.
RSB351/408
1/4
8
2K
6 Jets Arrières
1 Jet Avant
1/32
1/32
35
0
S.S.
RSB351/416
1/4
16
2K
6 Jets Arrières
1 Jet Avant
3/64
3/64
35
0
S.S.
RSB303/8052
3/8
5.25
5K
6 Jets Arrières
1 Jet Avant
.020
.020
30
0
S.S.
RSB303/8067
3/8
6.7
4K
6 Jets Arrières
1 Jet Avant
.025
.025
30
0
S.S.
RSB353/810
3/8
10
2K
6 Jets Arrières
1 Jet Avant
.035
.035
35
0
S.S.
RSB353/816
3/8
16
2K
6 Jets Arrières
1 Jet Avant
3/64
3/64
35
0
S.S.
RSB151/230
RSB201/230
RSB351/230
RSB451/230
1/2
30
2K
6 Jets Arrières
1/16
1/16
15
20
35
45
0
RSB151/215
RSB301/215
1/2
15
2K
6 Jets Arrières
1 Jet Avant
3/64
3/64
15, 30
0
S.S.
RSB201/210
1/2
10
2K
6 Jets Arrières
1 Jet Avant
1/32
1/32
20
S.S.
1 Jet Avant
NPT GPM
Dessous
Dessus
Diamètre Angle Matériel
RSB351/808
Modèle
Face
Diamètre Angle
S.S.
PSI
Qt. de Jets
RSB153/430
RSB353/430
3/4
30
2K
6 Jets Arrières
1 Jet Avant
1/16
1/16
15 ou 35
0
Matériel
Acier
RSA153/438
RSA353/438
3/4
38
2K
5 Jets Arrières
1 Jet Avant
5/64
1/16
15 ou 35
0
Acier
RSB153/445
RSB353/445
3/4
45
2K
6 Jets Arrières
1 Jet Avant
5/64
1/16
15 ou35
Acier
RSB153/468
3/4
68
2K
6 Jets Arrières
1 Jet Avant
3/32
1/16
15
0
Acier
RSB15130
RSB35130
1
30
2K
6 Jets Arrières
1 Jet Avant
3/32
1/16
15
0
Acier
RSB15145
RSB35145
1
45
2K
6 Jets Arrières
1 Jet Avant
5/64
1/16
15 ou 35
0
Acier
RSB15168
RSB35168
1
68
2K
6 Jets Arrières
1 Jet Avant
3/32
1/16
15 ou 35
0
Acier
RSC15152
RSC35152
1
52
2K
7 Jets Arrières
1 Jet Avant
5/64
1/16
15 ou 35
Acier
Face
Dessous
ASYBCO
RADIALE STANDARD.XLS
RE • BUSES RADIALE EXTRA
ASYBCO
RADIALE EXTRA.XLS
Modèle
Face
NPT
GPM PSI
Qt. de Jets
Diamètre
2K
6 Jets Arrière
4 Jets Côté
1 Jet Avant
3/64
3/64
3/64
35
15
90
0
S.S.
25
2K
6 Jets Arrière
4 Jets Côté
1 Jet Avant
3/64
3/64
3/64
35
15
90
0
Acier
3/4
37
2K
6 Jets Arrière
4 Jets Côté
1 Jet Avant
1/16
3/64
3/64
15
35
90
0
Acier
REE35137
REE15137
1
37
2K
6 Arrière
4 Jets Côté
1 Jet Avant
1/16
3/64
3/64
35
15
90
0
Acier
REE35146
REE15146
1
46
2K
6 Jets Arrière
4 Jets Côté
1 Jet Avant
1/16
1/16
1/16
35
15
90
0
Acier
REE15162
REE35162
1
62
2K
6 Jets Arrière
4 Jets Côté
1 Jet Avant
5/64
1/16
1/16
15
35
90
0
Acier
RET90134
1
34
2K
8 Jets Côté
1/16
90
Acier
REE351/225
REE151/225
1/2
25
REE353/425
REE153/425
3/4
REE353/437
REE353/437
Dessous
Angle Matériel
RC • BUSES RADIALE CARBURE
RADIALE CARBURE.XLS
Tungsten Carbide
Modèles
Face
Côté
Dessous
NPT
GPM
PSI
Qt. de Jets
Diamètre Angle Matériel
RCB153/430
RCB353/430
3/4
30
2K
6 Jets Arrière
1 Jet Avant
1/16
1/16
15 ou 35
0
Acier
RCB153/445
RCB353/445
3/4
45
2K
6 Jets Arrière
1 Jet Avant
5/64
1/16
15 ou35
0
Acier
RCA15157
RCA35157
1
57
2K
5 Jets Arrière
1 Jet Avant
3/32
1/16
15 ou 35
0
Acier
RCA15175
RCA35175
1
75
2K
5 Jets Arrière
1 Jet Avant
7/64
1/16
15 ou 35
0
Acier
RCB15130
RCB35130
1
30
2K
6 Jets Arrière
1 Jet Avant
1/16
1/16
15 ou 35
0
Acier
RCB15145
RCB35145
1
45
2K
6 Jets Arrière
1 Jet Avant
5/64
1/16
15 ou 35
0
Acier
RCB15168
RCB35168
1
68
2K
6 Jets Arrière
1 Jet Avant
3/32
1/16
15 ou 35
0
Acier
RCC15134
RCC35134
1
34
2K
7 Jets Arrière
1 Jet Avant
1/16
1/16
15 ou 35
0
Acier
RCC15152
RCC35152
1
52
2K
7 Jets Arrière
1 Jet Avant
5/64
1/16
15 ou 35
0
Acier
RCJ30140
1
40
2K
6 Jets Arrière
3/32
30
Acier
BUSES J4 RADIAL VORTEX • RV
Modèles
NPT GPM
RVP15X353/427 3/4
27
PSI
Qt. de Jets
2K
6 Jets Arrière
6 Jets Arrière
Diamètre Angle
3/64
3/64
15
35
Matétiel
Acier
RVJ15141
1
41
2K
6 Jets Arrière
5/64
15
Acier
RVP15X35127
1
27
2K
6 Jets Arrière
6 Jets Arrière
3/64
3/64
15
35
Acier
RVP15X35150
1
50
2K
6 Jets Arrière
6 Jets Arrière
1/16
1/16
15
35
Acier
RVP15X35180
1
80
2K
6 Jets Arrière
6 Jets Arrière
5/64
5/64
15
35
Acier
RVR15148
RVR35148
1
48
2K
7 Jets Arrière
5/64
15 ou 35
Acier
Qt. de Jets
Diamètre
Face
Dessus
Dessous
Face
Côté
Dessous
Face
Dessous
BUSES FMC • FM
FMC.XLS
Modèles
NPT GPM
PSI
Angle Matériel
FMA153/438
3/4
38
2K 5 Jets Arrière
1 Jet Avant
5/64
1/16
15 ou 35
0
Acier
FMA153/452
3/4
52
2K 5 Jets Arrière
1 Jet Avant
5/64
1/16
15 ou 35
Acier
FMA15138
FMA35138
1
38
2K 5 Jets Arrière
1 Jet Avant
5/64
1/16
15 ou 35
0
Acier
FMA15157
FMA35157
1
57
2K 5 Jets Arrière
1 Jet Avant
3/32
1/16
15 ou 35
0
Acier
FMA15169
FMA35169
1
69
2K 5 Jets Arrière
1 Jet Avant
7/64
1/16
15 ou 35
Acier
BUSES J7 PENETRETOR • PE
PENETRANTE.XLS
Modèles
PSI
Qt. de Jets
PEA153/438
PEA303/438
NPT GPM
3/4
38
2K
5 Jets Arrière
1 Jet Avant
Diamètre Angle
5/64
1/16
15 ou 30
0
Matériel
Acier
PEA153/457
PEA303/457
3/4
57
2K
5 Jets Arrière
1 Jet Avant
3/32
1/16
15 ou 30
0
Acier
PEA15157
PEA30157
1
57
2K
5 Jets Arrière
1 Jet Avant
3/32
1/16
15 ou 30
0
Acier
PEB15129
PEB30129
1
29
2K
6 Jets Arrière
1 Jet Avant
1/16
1/16
15 ou 30
0
Acier
PEB15145
PEB30145
1
45
2K
6 Jets Arrière
1 Jet Avant
5/64
1/16
15 ou 30
0
Acier
ASYBCO
RADIALE VORTEX.XLS
MA • BUSES MANIX
ASYBCO
MANIX.XLS
Modèles
Face
Dessous
NPT
GPM PSI
Qt. de Jets
Diamètre
Angle Matériel
MAV151/234
1/2
34
2K 6 Jets Arrière
2 Jets Avant
Croisés
1/16
1/16
15
10
Acier
MAV151/253
1/2
53
2K 6 Jets Arrière
2 Jets Avant
Croisés
5/64
1/16
15
10
Acier
MAV15153
1
53
2K 6 Jets Arrière
2 Jets Avant
Croisés
5/64
1/16
15
10
Acier
MAG15157
1
57
2K 6 Jets Arrière
2 Jets Av. Crois
1 Jet Avant
5/64
1/16
1/16
15
10
0
Acier
Dessus
DE • BUSES À DÉGELER
DEGELER.XLS
Thaw
Dessin Numéros 1
Face
Dessous
Face
Dessous
Dessin Numéros 2
Face
Dessous
Dessus
Dessin Numéros 3
Face
Dessous
Modèles
NPT GPM PSI
DEG351/808
1/8
8
2K 6 Jets Arrière
3 Jets Avant
Qt. de Jets Diamètre Angle Matériel
2/67
2/67
35
5
S.S.
# Dessin
1
DEG351/821
1/8
21 2K 6 Jets Arrière
3 Jets Avant
3/64
3/64
35
5
S.S.
1
DED451/405
1/4
5
2K 3 Jets Arrière
3 Jets Avant
.030
.025
45
5
S.S.
2
DEG351/408
1/4
8
2K 6 Jets Arrière
3 Jets Avant
2/67
2/67
35
5
S.S.
2
DEG351/821
1/4
21 2K 6 Jets Arrière
3 Jets Avant
3/64
3/64
35
5
S.S.
1
DEG353/89
3/8
9
2K 6 Jets Arrière
3 Jets Avant
1/150
1/50
35
5
S.S.
3
DEG353/813
3/8
13 2K 6 Jets Arrière
3 Jets Avant
1/28
1/28
35
5
S.S.
1
DEG353/821
3/8
21 2K 6 Jets Arrière
3 Jets Avant
3/64
3/64
35
5
S.S.
1
DEG353/833
3/8
33 2K 6 Jets Arrière
3 Jets Avant
1/16
3/64
35
5
S.S.
1
DEG153/438
3/4
38 2K 6 Jets Arrière
3 Jets Avant
1/6
1/16
15
5
Acier
3
DEG351/212
1/2
12 2K 6 Jets Arrière
3 Jets Avant
1/32
1/32
35
5
S.S.
3
DEG351/221
1/2
21 2K 6 Jets Arrière
3 Jets Avant
3/64
3/64
35
5
S.S.
1
DEG351/232
1/2
32 2K 6 Jets Arrière
3 Jets Avant
1/16
3/64
35
5
S.S.
1
DEG151/234
1/2
34 2K 6 Jets Arrière
3 Jets Avant
1 Jet Avant
1/16
3/64
3/64
15
5
0
Acier
3
DEG15138
1
38 2K 6 Jets Arrière
3 Jets Avant
1/16
1/16
15
5
Acier
3
DEG15142
1
42 2K 6 Jets Arrière
3 Jets Avant
1 Jet Avant
1/16
1/16
1/16
15
5
0
Acier
3
DEG15153
1
53 2K 6 Jets Arrière
3 Jets Avant
5/64
1/16
15
5
Acier
3
BUSE À JETS INVERSÉS • IN
Modèle
Face
Dessous
NPT GPM PSI
Qt. de Jets
Diamètre
Angle Matériel
INM201/810
1/8
10
2K 6 Jets Avant
1 Jet Avant
1/28
1/28
20
0
S.S.
INM201/816
1/8
16
2K 6 Jets Avant
1 Jet Avant
3/64
3/64
20
0
S.S.
INM201/830
1/8
30
2K 6 Jets Avant
1 Jet Avant
1/16
1/16
20
0
S.S.
INM201/410
1/4
10
2K 6 Jets Avant
1 Jet Avant
1/28
1/28
20
0
S.S.
INM201/416
1/4
16
2K 6 Jets Avant
1 Jet Avant
3/63
3/64
20
0
S.S.
INM203/810
3/8
10
2K 6 Jets Avant
1 Jet Avant
1/28
1/28
20
0
S.S.
INM203/816
3/8
16
2K 6 Jets Avant
1 Jet Avant
3/64
3/64
20
0
S.S.
INM203/848
3/8
48
2K 6 Jets Avant
1 Jet Avant
5/64
5/64
20
0
S.S.
INN203/813
3/8
13
2K 6 Jets Avant
3/64
20
S.S.
INM303/430
3/4
30
2K 6 Jets Avant
1 Jet Avant
1/16
1/16
20
0
Acier
INM201/230
1/2
30
2K 6 Jets Avant
1 Jet Avant
1/16
1/16
20
0
S.S.
1
45
2K 6 Jets Avant
1 Jet Avant
5/64
1/16
20
0
Acier
INM20145
BUSES À GRAISSE • GR
GRAISSE.XLS
Modèles
GRB253/430
GRB25145
Face
Dessous
NPT GPM
PSI
Qt. de Jets
3/4
30
2K
6 Jets Arrière
1 Jet Avant
Diamètre Angle Matériel
1/16
1/16
25
0
Acier
1
45
2K
6 Jets Arrière
1 Jet Avant
5/64
1/16
25
0
Acier
ASYBCO
JETS INVERSES.XLS
RO • BUSE ROTATIVE
ASYBCO
ROTATIVE.XLS
Modèles
NPT GPM PSI
Qt. de Jets
Diamètre Angle Matériel
ROW90/451/410
1/4
10
2K Barillet - 2 Jets Rotatifs
-2 Jets Rotatifs
- 6 Jets Arrière
ROW90/453/816
ROW90/451/216
ROW90/453/435
ROW90/45155
3/8
1/2
3/4
1
16
25
35
55
2K
2K
2K
2K
ROX451/410
1/4
10
2K
ROX453/816
ROX451/225
ROX453/435
ROX45155
3/8
1/2
3/4
1
16
25
35
55
6 Jets Arrière
ROY45/201/410
1/4
10
Barillet - 2 Jets Arrière
- 2 Jets Arrière
- 6 Jets Arrière
ROY45/203/816
ROY45/201/225
ROY45/203/435
ROY45/20155
3/8
1/2
3/4
1
16
25
35
55
90
45
20
Barillet - 2 Jets
- 2 Jets
90
90
1/16
20
1/16
45
45
20
Note
Le gallonnage et la pression de chacune de ces buses rotatives peuvent être ajustés
selon la demande. Aussi, des orifices arrières peuvent servir à augmenter le nettoyage
et la propulsion de la buse.
GPM and pressure of each rotojet nozzles can be ajusted on request. Also, rear thrust
jets provide the forward advance force as well as the flushing of the waste material.
TO • BUSE TORTUE
TORTUE.XLS
Modèle
NPT
GPM
PSI
Qt. de Jets
Diamètre
Angle
Matériel
TOU15155
1
55
2K
4 Jets Arrière
1/8
5
Acier
BUSE À SABLE • SA
SABLE.XLS
Qt. de Jets
Dia.
SAB183/434P
NPT GPM PSI
3/4
34
2K
6 Jets Arrière
1 Jet Avant
Mini
1/16
1/16
Angle Matériel
18
0
ALUM
PROTÉ
SAB183/434
3/4
34
2K
6 Jets Arrière
1 Jet Avant
Mini
1/16
1/16
18
0
ALUM
SAB18134
1
34
2K
6 Jets Arrière
1 Jet Avant
Mini
1/16
1/16
18
1
ALUM
SAK18139
1
39
2K
8 Jets Arrière
1 Jet Avant
1/16
1/16
18
0
ALUM
SAK18158
1
58
2K
8 Jets Arrière
1 Jet Avant
5/64
1/16
18
0
ALUM
SAK18164
1
64
2K
4 Jets Arrière
4 Jets Arrière
1 Jet Avant
3/32
1/16
1/16
18
18
0
ALUM
SAK18164P
1
64
2K
4 Jets Arrière
4 Jets Arrière
1 Jet Avant
3/32
1/16
1/16
18
18
0
ALUM
PROTÉ
SAO18134
1
34
2K
8 Jets Arrière
1” NPT Avant
1/16
18
ALUM
SAK1811/439
1 1/4
39
2K
8 Jets Arrière
1 Jet Avant
1/16
1/16
18
0
ALUM
SAH1811/459
1 1/4
59
2K
6 Jets Arrière
6 Jets Arrière
1 Jet Avant
1/16
BALAI
1/16
18
18
0
ALUM
SAK1811/464
1 1/4
64
2K
4 Jets Arrière
4 Jets Arrière
1 Jet Avant
3/32
1/16
1/16
18
18
0
ALUM
SAK1811/464P 1 1/4
64
2K
4 Jets Arrière
4 Jets Arrière
1 Jet Avant
3/32
1/16
1/16
18
18
0
Alum
PROTÉ
ASYBCO
Modèles
Modèle SAK18164
Face
Modèle SA11/413
Dessus
Dessous
Face
Dessus
Modèle SA1AP9
Face
Modèle SA3/47P
Dessus
Dessous
Dessus
Dessous
Modèle SAH1811/459
Face
Dessous
Face
Dessus
Dessous
BUSE FLR • FL
ASYBCO
FLF20153
Modèles
NPT GPM PSI
Qt. de Jets
Diamètre Angle Matériel
FLF20153
1
53
2K
5 Jets Arrière
2 Jets Arrière
1/16
3/32
20
5
Acier
FLF20166
1
66
2K
5 Jets Arrière
3 Jets Arrière
5/64
3/32
20
5
Acier
FLQ05120
1
20
2K
3 Jets Arrière
1 1/4 NPT Avant
3/32
5
Acier
FLQ05150
1
50
2K
3 Jets Arrière
Pointe Avant
1/8
5
Acier
FL11/4P
Pointe FLR100
NIL
NIL
Acier
FLL2011/421 1 1/4
21
2K
5 Jets Arrière
1 Allan Screw Avant
1/16
20
Acier
FLL2011/414 1 1/4
14
2K
5 Jets Arrière
1 Allan Screw Avant
.052
20
Acier
FLL2011/434 1 1/4
34
2K
5 Jet Arrière
1 Allan Screw Avant
5/64
20
Acier
FLL2011/421
FL11/4P
1 1/4 NIL
BUSES HAUTES PRESSION
1
Hole Ahead
3
1/4" - 28 UNF
45O
45O
Holes Ahead at 45o
6
Holes Back at 45o
Nozzle No A-8
BUS-HPA31/4R
6 Jets : .030”
Taraudage 1/4 - 28 NF
BUS-HPA21/4R
3 Jets : .030”
Taraudage 1/4 - 28 NF
BUS-HPP2SS3/8R
BUS-HP103153/8R
BUS-HPP1TS31/2
BUS-HPH2153/8
BUS-HPH21/2R
BUS-HPT1TS1/8R
ASYBCO
5/16" Dia.
1 3/4"
ASYBCO
JETS POUR BUSES À SABLE
Face
Dessus
Dessous
Modèle
NPT NF GPM
Qt. de Jets Angle Matériel
Forme
ACJH1/4NF042
-
1/4
4.2
1
0
S.S.
Hexagone
ACJH1/4NF106
-
1/4 10.6
1
0
S.S.
Hexagone
ACJH1/4NPT042 1/4
-
4.2
1
0
S.S.
Hexagone
ACJH1/4NPT068 1/4
-
6.8
1
0
S.S.
Hexagone
ACJH1/4NPT106 1/4
-
10.6
1
0
S.S.
Hexagone
ACJH1/4NPT142 1/4
-
14.2
1
0
S.S.
Hexagone
ACJH1/4NPT186 1/4
-
18.6
1
0
S.S.
Hexagone
JETS ALLEN
Face
Dessus
Dessous
Modèle
NPT
NF
ACJA5/16NPT068 5/16
24
6.8
1
0
Acier
ACJA3/8NPT068
24
6.8
1
0
Acier
3/8
GPM Qt. de Jets Angle Matériel
ASYBCO
SKIDS
1” x 5 1/4”
1 1/4” x 5 1/2”
Length: 8”
1” NPT x 3 1/4”
1 1/4” NPT x 3 1/2”
Length: 8”
1” NPT x 2 1/4”
1 1/4” NPT x 2 1/2”
Length: 8”