International

Transcription

International
REPLACEMENT
PARTS FOR:
CHEVROLET/GMC
FORD/STERLING
FREIGHTLINER
HINO
INTERNATIONAL
ISUZU
MITSUBISHI
SPRINTER
UD
New Products!!!
Charge Air Coolers
for International
pg
46
Complete
Replacement
Doors
pgs
4-5
ROLLARAMP ®
pg
Replacement Slats
for Hackney &
Mickey
pg
61
Rear Door Hinges
pgs
70-71
62
Door Hold Backs
pg
69
Chevy/GMC............................... 6-16
Body Hardware & Mirrors................... 6-7
Radiators............................................ 8
Exhaust............................................... 9
Fuel Tanks........................................... 9
Misc. Parts.......................................... 10-11
Brakes................................................ 12-16
Ford/Sterling............................. 17-20
Mirrors................................................ 17
Radiators............................................ 18
Exhaust............................................... 19
Fuel Tanks........................................... 19
Misc. Parts.......................................... 20
Freightliner............................... 21-26
Front End Parts................................... 21
Door Handles...................................... 22
Mirrors................................................ 23
Fuel Tanks........................................... 23
Brakes................................................ 24
Radiators............................................ 25
Exhaust............................................... 26
Hino/Isuzu/Mitsubishi/UD........ 30-37
Hino.................................................... 30-31
Isuzu................................................... 32-35
UD...................................................... 36
Mitsubishi............................................ 36
Sprinter............................................... 37
International............................. 38-51
We Want to Help you Fix Your
International
Navistar!
pg
48
pg
Front End Parts................................... 38
Door Hardware................................... 39
Engine................................................ 40
Heater................................................. 41
Mirrors................................................ 42-43
Radiators............................................ 45
Air Coolers.......................................... 46
Fuel Tanks........................................... 47
Brakes................................................ 48
Exhaust............................................... 49-51
Roll Up Door............................. 52-61
Todco.................................................. 54-57
Whiting................................................ 58-59
Diamond............................................. 60
Hackney & Mickey.............................. 61
Miscellaneous.......................... 62-75
Lights........................................ 76-92
38
LED..................................................... 76-89
Incandescent...................................... 86-92
Lift Gate.................................... 93-95
pg
pg
pgs
49-51
47
pg
45
38
pgs
pg
39
pg
38
42-43
REPLACEMENT
2 CARGO CONTROL
800-888-5072 • MillSupply.com
WHEEL CHOCKS
CARGO STRAPS
Sale Price
Reg. Price
Good Thru
8/31/2016
84-512 ..... 12 foot.......$12.42....... $9.95
2” Wide x 12’, 16’ or 20’ E-Strap with Cam style buckle.
Uses weather resistant, 4500 lb. rated, 2” yellow strapping. 84-516 ...... 16 foot.......$13.64..... $11.70
84-520 ..... 20 foot.......$15.52..... $12.20
48” fixed end length. Working load limit of 833. lbs.
Sale Price
Reg. Price
Made of Tough Reinforced Rubber
Resistant to Sun, Salt, Oil and Acid
76-590
Heavy-Duty Rubber Wheel
Chock with Anchor for
Chain & Hand Hold
Height: 8-1/4"
Road Contact: 7" x 10-1/4"
Weight: 11.15 lbs.
Sale Price
Good Thru
8/31/2016
$29.95
Good Thru
8/31/2016
84-312 - 12 foot with 3-piece end fitting.................... $27.30.....$23.40
84-212 - 12 foot with spring loaded end fitting........... $26.11.....$23.40
Reg. Price
2” Wide x 12’ Ratchet Buckle E-Strap. 48” fixed end length. Assembled
using heavy-duty 12,000 lb. weather resistant 2” yellow polyester webbing.
Working load limit: 1000 lbs.
SERIES E ALUMINUM SHORING BEAM
Series E Aluminum Decking/Shoring Beam Assembly with spring loaded end latch
assembly. 2200 lb. Working Load Limit
Sale Price
Reg. Price
Good Thru
8/31/2016
84-584 - 84.5”-95.4” Beam Assy......... $62.70......... $53.30
84-593 - 93”-102” Beam Assy............. $67.83......... $56.75
1+ $38.89
6+ $35.81
50+ $33.91
76-595
Heavy-Duty Rubber Wheel
Chock with Handle
Height: 5"
Road Contact: 10" x 8"
Weight: 8.00 lbs.
Reg. Price $30.38
Sale Price
Good Thru
8/31/2016
Replacement Parts
$17.34
43627-10 - End Assembly with spring loaded end fitting. Can be used
with old or new aluminum beams. Order the rivet pin 41338-10 separately.
1+ $19.98 6+ $17.98 12+ $15.98
41338-10 - Rivet Pin for End Assembly 1+ $1.20
6+ $0.98
5 foot can ship UPS
10 foot ships Freight
HORIZONTAL SERIES E-TRACK
• Powder coated
84-250 E-Track, 5 ft. length ......$14.76
• 5 or 10 foot long
84-500 E-Track, 10 ft. length 1+ $
26.54
• 12-gauge steel
10+$23.88
• 50,000 lbs. minimum yield
• Can be attached by screws, rivets or welded
ROPE RINGS
84-601 – Recessed Rope Ring
• 285 lb. Safe working load
• Zinc plated
• Requires 3” diameter mounting hole in 3/8” or thicker material (not for lifting).
1+ $1.82 6+ $1.62
12+ $1.54
B-32F – Surface Mount Rope Ring
• 2000 lb. Working load limit
• Zinc plated
• 3/8” forged rope ring
• Do not use for lifting
1+ $5.98
B-20 – Surface Mount Rope Ring
• 800 lb. Working load Limit
• Zinc plated
• ¼” dia. Ring & formed steel clamp
• Do not use for lifting
1+ $2.06 12+ $1.80
Sale Price
Good Thru
8/31/2016
$26.64
76-770
Aluminum Wheel Chock
28,000 lb. capacity
Height: 5-1/4"
Road Contact: 6" x 7"
Weight: 1.50 lbs.
Reg. Price $20.81
76-530
Rubber Wheel Chock
Height 5", Serrated Base
Road Contact: 5" x 6"
Weight: 2.35 lbs.
Sale Price
Good Thru
8/31/2016
$8.95
Reg. Price
1+ $12.36
6+ $10.97
24+ $
10.38
400lb Work
Load Limit
76-550
Rubber Wheel Chock
Sale Price Height 5", Serrated Base
Good Thru
8/31/2016
Road Contact: 8" x 6"
$15.50 Weight: 5.9 lbs.
Reg. Price
1+ $19.40
6+ $18.43
84-105 - 20’ Pull
Strap, 1” Wide
with ‘S’ Hooks,
with 4 ft. fixed end
1+ $15.73 12+ $14.15
8L4242 - 15’
Ratchet Strap,
1” Wide with ‘S’
Hooks with 1 ft.
fixed end $$22.88
Sale Price
Good Thru
8/31/2016
$45.00
76-585
Yellow Composite Wheel Chock with 32” Rope
Safety yellow recycled composite,
Height: 4"
Road Contact: 9-1/2" x6"
Weight: 10.50 lbs.
Reg. Price $53.95
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT
MIRRORS
800-888-5072 • MillSupply.com
3
WEST COAST MIRROR HEADS
W-180
7” x 16” Steel
Head (White)
with 5/16” stud
$13.14
600807 7” x 16”
Stain.Steel. $29.31
600682 - 7” x 16”
White
$29.69
1159
ML-10132
7 “ x 16” Aluminum
(White) with 5/16”
stud $29.14
HEATED
7"X16" Polished S.S.
mirror head with nonglare glass. Universal
5/16" stud mounts with
lock nuts. $22.50
HEATED
S-158KDV
S-158-K
6” x 16” Aluminum
Flange Mount with
Yellow Chevrons $30.69
S-158-K1 Glass Only
$5.85
HEATED
6” x 16” Aluminum
Double Vision with
Convex Spot Mirror on
Bottom. With Yellow
Chevrons $42.13
HEATED
7” x 16” Polished
Stainless Steel
with 5/16” studs
7” x 16” Mirror Heads. Heated mirrors have
wire harness w/Bullet Plug for International
GMC Kodiak $43.52
1162-H - Heated, with wire harness, 60-310 - Non-Heated Mirror Head $31.23
w/o plug (universal fit) $62.19
60-330 - Heated Driver Side $53.02
1162-IHO - Heated w/wire harness, 60-331 - Heated Pass. Side $53.02
with flat plug for Navistar. $68.50
1162 - Non-Heated, popular with
M-616 - 7”x16” Heated
Polished Stainless
Steel, w/wire harness,
w/o plug. $45.02
1157-H - 7”x16” Heated
Polished Stainless Steel,
w/wire harness, w/o plug.
$46.26
60-345 - Same as 1157H
but with harness & plug,
for Navistar $61.15
STICK-ON SPOT MIRRORS
STUD MOUNT SPOT MIRRORS
61-482 - 2” dia. $1.34
61-483 - 3” dia. $1.62
61-484 - 3-3/4” dia. $1.96
708560 - 8-1/2” Dia.
Heated Spot Mirror,
stainless steel, with “L”
bracket, offset stud
$18.61
723080
Stainless steel “L”
Bracket for Spot
Mirrors $5.18
718394-5 - Corner Mount Spot
Mirror set. Dim: 2.5” x 3.25”.
One pair of left & right $28.81/pr
61-455 - 5” Dia. with
Stud & Clamp on Mtg.,
center mount stud,
fits all tubular brackets,
Black. $14.02
61-457 - Same but
Stainless Steel $14.01
61-485 - “The Wedge”
Corner Mount Spot Mirror,
3-3/8” Overall size $2.84
61-475 - 7-1/2” Dia.
Spot Mirror. stainless
steel with “L” bracket,
with 1/4” offset stud
$20.70
708556 - 8-1/2”
Dia. Spot Mirror
with “L” bracket,
center mount
stud. $11.09
61-486 - 4” x 5-1/2”
Spot Mirror $2.90
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT
4
COMPLETE ROLL-UP DOORS
r
Have a Replacement Doo
in about a Week!
800-888-5072 • MillSupply.com
UNIVERSAL 3/4” DRYFREIGHT
DOORS FIT SIZES 84” - 96” WIDE BY 76” - 90” HIGH
Track not included, Counterbalance can be ordered separately
Mill Supply’s 3/4" dryfreight painted-white wood doors include all the hardware for a quick and
easy replacement of all the panels. The top panel includes the hardware and weatherstrip but is not
assembled so it can be trimmed to fit different door heights. One complete side of the door can
be trimmed to fit smaller door widths. Hinges are purposely not installed on one side and top so
when trimmed to a smaller size your hinges and rollers will install with minimal effort. Door is 80%
pre-assembled. Order Counterbalance separately. Track not included.
Includes:
NEW
82” - 90” height
96" WIDE DOORS
AND COUNTERBALANCE
ASSEMBLIES
ite
h
ed W
t
n
i
a
P
84” -
MADE IN USA
Door panels are Painted White, 7 ply,
3/4" top quality, medium density
overlaid hardwood-faced plywood
manufactured with a 2 step layup
and waterproof glue bond. Top panel
and one complete side can be cut to
match original door.
•Pre-Painted white
•1" or 2” rollers
•Tongue-and-groove joints
•Head and bottom seals included
•4 rows of hinges
•Stainless Steel cables and rivet
fasteners. If you need a rivet tool or
would prefer finishing your door with
bolts and nuts, see below.
•Todco or Whiting style lock, lift handle
and 18" looped pull strap
•All door hardware is Zinc Plated
(1" rollers) or E-COATED (2" rollers)
•Counterbalance can be ordered
Separately
•Track not included
idth
96” w
20-7090................ $34.40
43 Sets of Splined Step Bolts and Nuts. Order
these if you prefer not to use the rivets provided.
20-7091................ $26.95
Air Hammer Rivet Set for mounting rivets
that are included with the door
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT
COMPLETE ROLL-UP DOORS
800-888-5072 • MillSupply.com
REPLACEMENT ROLL-UP DOOR
Order Your
Counterbalance
Assy Separately
3/4” Dryfreight Roll-Up Doors
Door Part #
Door Size
Can be Trimmed to Roller Size
Door Price
CounterBalance
20-7085
$98.58
20-7087
$149.30
20-7044
90” W x 82"H 84" W x 76” H
1”
$547.55
20-7036
90” W x 82”H 84” W x 76” H
2”
$598.00
CB Price
Includes: shaft, spring(s), winding plugs,
cable drums, bearing assemblies
90"W x 82"H Doors includes six painted white 11" panels and
one 16" top panel plus all hardware as noted above, less track.
20-7061
90” W x 90”H 84” W x 84” H
1”
$569.50
20-7085
$98.58
20-7052
90” W x 90”H 84” W x 84” H
2”
$630.70
20-7087
$149.30
NEW
20-7070
96” W x 90”H 90” W x 84” H
1”
$569.50
20-7085
$98.58
NEW
20-7073
96” W x 90”H 90” W x 84” H
2”
$630.70
20-7087
$149.30
90"W and 96"W x 90"H Doors includes six painted white 15”
panels plus all hardware as noted above, less track.
Doors with 1" rollers use a single
spring counterbalance. Doors
with 2" rollers use a double
spring counterbalance.
UNIVERSAL ROLL-UP DOOR PANELS
TP-15........ $55.80
15” x 92” Top Panel
15”
TOP PANEL
92”
IP-11........ $46.80
Mill Supply carries universal wood door
panels for a replacement on Todco and
Diamond doors. These panels have a
92” width and can be cut at each end to
provide the correct length. All panels are
made of 3/4”, 7-ply premium plywood and
are white in color.
11” x 92”
11”
E PANEL
T
A
I
D
E
M
TER
IN
IP-15........ $55.80
15” x 92”
or
15”
92”
BP-11....... $76.70
11” x 92”
11”
or
15”
PANEL
BOTTOM
92”
BP-15...... $85.25
Our panels are Tongue and Groove
style and cannot be mixed with the
Lap Joint Style
We have included additional
inside edge routing to mount
hinges when narrowing doors.
15” x 92”
MADE IN USA
Make sure to check out or full selection
of roll up door parts on pages 52-61
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
5
REPLACEMENT PARTS for
38
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
FRONT END PARTS
New Style
D
Old Style
M
E
A
O
F
G
L
B
O
H
I
N
90"
37.250"
P
14.500"
K
J
C
32"
New Style
A....... 536-652............Grille, Durastar 4100-4400, 1300FBC, RXT, Workstar 73/7400 & 8500. OE No: 3564289C91, 3564289C92,
..................................3564289C93, 3564289C94, 3564289C95, 3564289C96, 3564289C97, 3564289C98, 3564289C99...........$328.50
B....... 536-657............Grille, modified style. Durastar 4100-4400, 1300FBC, RXT, Workstar 73/7400 & 8500.................................$328.50
C....... 585-888............Front Bumper, black, must be shipped freight...............................................................................................$459.38
C....... 585-759............Front Bumper, chrome, must be shipped freight............................................................................................$502.50
D....... 527-5109..........Right headlight assembly. 3300 & 4400 Series. OE: 3565430C91, 3565430C92, 3565430C93...................$196.93
E....... 527-5110...........Left headlight assembly. 3300 & 4400 Series. OE: 3565429C91, 3565429C92, 3565429C93.....................$196.93
F....... 527-5105..........Right headlight assembly. 4000 Series. OE: 3574387C91/C92/C93/C94, 4020384C91...............................$213.89
G....... 527-5106..........Left headlight assembly. 4000 Series. OE: 3574388C91/C92/C93/C94, 4020383C91..................................$213.89
H....... 527-5101..........Right headlight assembly. Workstar. OE: 3605817C92..................................................................................$228.84
I........ 527-5102..........Left headlight assembly. Workstar. OE: 3605816C92....................................................................................$228.84
J........ 527-5123..........Left LED marker light. 4100, 4200/LP, 4300/LP, 4400/LP. OE: 3561965C1.......................................................$17.15
J........ 527-5122..........Right LED marker light. 4100, 4200/LP, 4300/LP, 4400/LP. OE: 3561966C1.....................................................$17.15
Old Style
K....... 85-575..............92" Unpainted front bumper. Durastar 4700-4900.........................................................................................$164.83
L....... 548-7102..........Right headlight bezel. 4000 & 8000 Series. OE: 1654294C1, 1661764C1, 3000078C1, 34004274, EE02004023..........$25.52
M....... 548-7101..........Left headlight bezel. 4000 & 8000 Series. OE: 1654293C1, 1661763C1, 3000077C1, 34004277, EE02004024.............$25.52
N....... HL-6054-H.......7x5 Rectangular halogen high/low beam.........................................................................................................$12.68
N....... HL-6052...........7x5 Rectangular high/low beam.......................................................................................................................$11.38
O....... 4097A..............Front turn signal light, fits Left or Right. OE: 1677715C91...............................................................................$39.63
P....... 9467.................Bulb socket harness with plug.........................................................................................................................$16.00
International 4000 Series
532-535................. $14.72
Hood cable, 18.5"L
OE# 500827C1, EE02004001
International 4000, 4600/LP,
4700LP, 4800 1990-2001
International and Ford
532-100....................$3.24
532-520................... $9.91
Replacement hook for coil
Hood Control Spring, 1-3/8" x 7"L spring hood cables. 5.25"L
OE# 1675762C3
OE#: 4C4Z16492AA, 590279C2
International
2000-4000, 7000, 8000,
Prostar
532-632...............$56.82
Hood Latch
Replaces OE No: 3544924C1
International 4000 Series
1979-2011
527-498...................... $11.48
Hood Latch Kit
International 4000 Series
532-530.................... $16.92
Hood cable, 29"L
OE#: 483687C1, 483687C2,
EE02004066
International 4000 Series
532-533......................$23.04
Hood cable, 24.25"L with 12.25"
end cables. OE# 1669283C1,
1677457C1
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS for
39
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
DOOR HARDWARE
Front View
Front View
Rear View
Rear View
Front View
Rear View
International 3000 & 4000 Series
527-2055.........................$30.33
Door Handle 1997-2007, Replaces OE:
1680789C91, 3550925C91, 3550931C91
International 4300, 4300LP
2002-2009
527-491....................$26.95
Window Crank Handle.
Replaces OE: 3508990C4
International 4000 Series
527-533..................$43.04
Left Door latch
527-535..................$40.36
Right Door latch
International 4000 Series
527-5103............... $37.22
Door Hinge 2002
Replaces OE: 3549259C1
International 3200 Comm Bus 41/42/43/4400
73/74/75/76/7700 85/8600 CXT/MXT
525-500............................ $67.44
Left Exterior door handle, black body with chrome
handle, Replaces OE: No. 2594003C1
525-505............................ $67.44
Right Exterior door handle, black body with chrome
handle, Replaces OE: No. 2594006C1
International 4000 & 7000
Series 2005-2011
548-6105................ $21.69
Left or Right Interior pull handle.
Replaces OE: 2505201C1
International 4000 Series, 1990-05
527-579............................ $45.30
Right Window Regulator, Replaces OE:
1686705C91, 449767C93, 2018056
527-577............................ $45.30
Left Window Regulator, Replaces OE:
1686704C91, 449766C93, 2018054
Front View
Rear View
International 4000 Series 2003-11
527-494............................ $179.56
Right Power Window Regulator, Replaces OE: 3515113C92
527-495............................ $179.56
Left Power Window Regulator, Replaces OE: 3515112C92
International 5000 & 9000 Series
1986-2015
548-9101..............$62.07
Left Interior door handle, chrome
Replaces OE: 1649758C1,
02023003
548-9102.............$62.07
Right Interior door handle, chrome
Replaces OE: 1649759C1,
02023008
International 5000 & 9000
Series 1986-2015
548-5110...............$111.61
Exterior door handle.
Replaces OE: 3550930C91
International Durastar
527-524................$33.59
Left Interior door handle, Replaces OE 2505424C1
527-526................$33.59
Right Interior door handle, Replaces OE 2505425C1
International 5000 & 9000
Series 2000-2015
548-3101..............$194.40
Exterior door handle, textured
black.
Replaces OE: 3518423C1
548-8102 - Door Weatherstrip,
167" long.
Replaces Navistar OE: 3508972C6
Fits 1990-2014 International 3200,
4100, 4300/LP, 4400/LP, 7300,
7400, 7500, 7600, 7700 CXT, RXT,
MXT, ProStar, LoneStar. $166.38
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS for
40
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
ENGINE COMPONENTS
Silicone Hump Hoses
Inside Dia.
A
Inside Dia.
Hump hoses are used to compensate the variances
when connecting pipes to the intake. Because of their
design, they can provide a flex of up to 20 degrees for
slight bends.
Mill No/OEM No.
520-512
1629046C1
520-510
675723C1/C2
520-514
1811969C1
520-518
1675717C1
2024703C1/C2
520-516
2004578C2
2007370C1
2030772C1
C
B
Hump Hose, Silicone
Application
A Dim.
International
International
International
International
International
1.95"5.00" 3"
2.00"2.50" 2.25"
2.20"3.60" 3.00"
2.40"5.40" 3.50"
2.45" 5.40"
3"
B Dim.
C Dim.
International 4000 Series
1999-2004
527-489.................. $40.01
Motor Mount Black steel.
Replaces OE: 479237C1
Part No.
Price
520-512
520-510
520-514
520-518
520-516
$14.13
$8.63
$16.40
$38.93
$28.79
International 4000 Series 1997-2007
532-5105.......................... $39.85
Speed Sensor,
Replaces OE: 3528003C1
International 4000 Series
1990-2004
527-490...................... $31.64
Shift Boot
Replaces OE: 291068C2
International 4500/4600/4700
Series
527-493...................... $29.90
Shift Boot, Replaces
OE: 286655C1/C2/C3/C4
WIPER PARTS
3 Quart Reservoirs
have 3 mounting holes
per side, 4 Quart has
4 mount holes per side
and 6 Quart has 6
mount holes per side.
T-Bolt Clamp, 3/4" Wide Band and Trunion,
Stainless Steel, Spring Loaded
520-600 - T-Bolt Clamp, 3-1/16" to 3-3/8"
520-601 - T-Bolt Clamp, 3-3/8" to 3-11/16"
520-602 - T-Bolt Clamp, 3-9/16" to 3-7/8"
520-603 - T-Bolt Clamp, 4-1/16" to 4-3/8"
520-604 - T-Bolt Clamp, 4-9/16" to 4-7/8"
Cargo Box Corner Cap for
Morgan Olson Box Trucks
$7.94
$9.58
$8.03
$8.98
$8.30
49-908
49-910
49-915
• 70 oz. capacity
• Mounts flush to a flat surface
• Grounding grommet built in
• 4 mounting bolts
• Mounting hole centers at
3-5/8” Wide x 6-1/2” High
• 3, 4 or 6 quart capacity
• Mounts flush to flat surface
• Includes Pump Motor & Cap
• Dim: 8-5/8” W x 11-1/4”H
49-907.............................$43.80
Reservoir and washer pump,
70 oz., mounts flush
AV-19660 - 2-Wire Pigtail $0.00
49-917
531-222........................................................ $69.51
Passenger side corner cap. Includes hardware & sealant
531-225........................................................ $67.49
Driver side corner cap. Includes hardware & sealant
531-201.......................................................... $0.86
Corner light lens
531-203.......................................................... $3.78
Corner light base and pigtail
International 4000 Series
2001-2012
527-492...................... $14.60
Wiper Nozzle
Replaces OE: 3508990C4
49-908 - 3 Quart Reservoir.......... $33.15
49-910 - 4 Quart Reservoir.......... $39.77
49-915 - 6 Quart Reservoir.......... $42.20
49-917 - Pump Motor w/Packard
connector & grommet............ $17.87
49-918 - 2-Wire Pigtail ............$7.11
14-002103 - Snap on Cap ..... $2.64
063360 - Thread on Cap ...... $10.01
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS for
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
41
HEATER PARTS
51-121
51-122
51-123
51-125
51-124
Description
Rotation
Motor
Length
Diameter
Motor
Vehicle type
Replaces OEM Numbers
Price
51-121
Heater Motor w/blower
wheel
CW
4-1/8"
3"
International 4000, 7000, 8000 Series.
3542611C2, 1013008, HA1705,
890099, 2540-01-537-6399
$151.84
51-122
Heater Motor w/blower
wheel
CW
4-1/2"
3"
International 4100-4400 Medium Duty,
7000, 9000 Series, Prostar Linehaul Conv.
3674285C1, 1013013,
76989, 919529
$150.56
51-123
Heater Motor w/flange
CCW
4-3/8"
3-1/4"
International, Sterling 1999-2001, Ford
L8000/9000 1993-97
1699949C1, 3541558C1,
35392
$40.90
51-124
Heater Motor w/flange
CW
4-3/8"
3-1/4"
International 4500-4900 1995 and before,
9600 & 9700 Series Premium Cabovers,
9200-9700 Series Premium Conventionals
169929C1, 3108009, 937752,
HA1245, 1013004, 203123,
2809-541-109, 890063, 35280
$49.98
51-125
Heater Motor w/flange
CW
4-3/4"
3-1/4"
Fits 2000 Series Medium and Heavy-Duty trucks,
S3400, 3600, 3700 and 3800 school bus models,
4500, 4600, 4700, 4800 and 4900 medium duty
trucks S5000 series, severe service trucks 9600,
9700, 9800 premium cabovers
1669786C1, 937714,
35550
$64.43
Part No
52-018 - Plastic Blower Wheel, CW,
offset hub, 5" dia. x 3" deep.
Replaces # 465502C1. $13.25
B-448 - Dual wheel blower assembly.
12 Volt; uses one motor with dual
shafts. Overall mounting surface
dimensions: 13-7/8" x 4". Universal in
design. $82.53
55-110 - Dual wheel blower assembly,
12 Volt. Uses dual shaft motor. Overall
Dimensions: 6-1/2"H x 13-3/4"W x 5-1/2"D.
Base dimensions: 5-1/4" x 13-3/4".
Universal in design $143.38
51-518 - Resistor, 3
terminal. Fits International
2000, 4000 & 8000 Series.
Replaces: 1696836C1,
2099004, 650179 $17.98
51-519 - Resistor, 4 terminal.
Fits International 4500-4900 1996
& before, 9100-9400 Premium
Conventionals, 9600-9800 Premium
Cabovers Series.
Replaces: 506552C1, 2013003,
650177 $15.39
53-639 - 3-Speed Rotary Heater
Switch: 1" threaded shaft length.
Off-Low-Medium-High. 5 spade
terminals. $10.88
53-537 - Heater Knob, round
with marked top. $1.71
532-5101 - HVAC Vent,
IHC 4000 Series.
Replaces OE: 3529263C1
$31.00
54-576 - Heater shut off valve. 5/8" Hose.
Fits: International 4200-4300.
Replaces: 369512-C92, 2411007.
$18.54
54-577 - Heater shut off valve. 3/4" Hose.
Fits: International 4200-4300, 5000-6000.
Replaces: 367972-C92, 2413006
$30.24
50-604 - Evaporator Core. 12" x 8" x 2-3/8".
Fits: International 4000, 7000 & 8000 Series
Replaces: 3542576C2 $115.06
55-104 - Block Type Flange Expansion
Valve. Fits: International 2000, 4000 and
8000 Series.
Replaces: 2503783C91 $24.82
M-3200-12V - 12 Volt Defroster/Circulating fan
with two speed switch on base. Black heavyduty die cast base. Chrome guard. 280 CFM.
7-1/2" Cage Diameter; 9-1/2" Overall Height.
$72.33
M-1000-12-V - 12 Volt Fan. All
chrome, two speed motor with
three position toggle switch.
Three hole mounting. 230 CFM.
7-1/2" Cage Diameter; 8-1/2"
Overall Height. $29.95
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
42
REPLACEMENT PARTS for
INTERNATIONAL/NAVISTAR
MIRROR ASSEMBLIES & PARTS
BLACK
LOOP
MIRROR &
BRACKET
Y
ASSEMBL
1” Chrome Tubing
If your OE Mirror is Damaged
You can Replace it
with our Replacement
Chrome Assembly
Fits Vehicle:
DuraStar 4100, 4200, 4200LP, 4300, 4300LP,
4400, 4400LP, 4700, 4700LP, 4700LPX,
4800, 4900, Hybrid, Mid-Cab. WorkStar
7300, 7400, 7500, 7600, 7700, Hybrid.
TranStar 8100, 8100CH, 8200, 8500, 8600
(2002-Present); ProStar (2006-Present);
TerraStar Class 4/5 (2010-Present)
611741
800-888-5072 • MillSupply.com
(Bracket Mounts to Original Holes)
610872
405
Mirror
Bracket
System
Rear View
CHROME
ENT
EPLACEM
R
611744
Spot Mirror
not included
611788
610881
611761
Mirror Loop & Bracket Assemblies
611751 - Left Mirror Bracket Assembly, black ....... $168.50
Manual heads, Replaces OE: 2505274C3
611752 - Right Mirror Bracket Assembly, black ..... $168.50
Manual Heads, Replaces OE: 2505275C3
611753 - Left Mirror Bracket Assembly, black ....... $218.82
with Harness for heated heads, OE: 2589149C2
611754 - Right Mirror Bracket Assembly, black ..... $218.82
with Harness for heated heads, OE: 2589150C2
Glass Only
611740 - Flat Glass only, non heated....................... $43.25
7-5/8"W x 16-3/4"H, OE: 2505813C2
611741 - Flat Glass only, heated............................... $69.26
7-5/8"W x 16-3/4"H, OE: 2505814C2
611743 - Convex Glass only, non heated................. $52.22
7-5/8"W x 7-5/8"H, OE: 2505815C2
611744 - Convex Glass only, heated......................... $63.75
7-5/8"W x 7-5/8"H, OE: 2505816C2
Note: The heated mirror heads do not have the OEM connectors
and will have to be spliced into the existing wire system.
Replacement Chrome Assembly & Parts
611763
611761
611788
611786
61-475
612994
Passenger side assy. Includes: chrome mirror loop, ........$178.86
upper & lower mounts, and west coast mirror head
Driver side assembly. Includes: chrome mirror loop, ........$178.86
upper & lower mounts, and west coast mirror head
Passenger side mirror loop w/cab feet. Mirror not incl......... $150.42
Driver side mirror loop w/cab feet. Mirror head not incl..... $141.00
7-1/2" Round SS convex spot mirror w/L bracket................$20.70
Dovetail clamp (2 pc) for 1" loop to mount 61-475................ $7.30
8" x 17" West Coast Mirror Heads
610872
610878
610873
610879
Black non-heated plastic mirror w/clamp mounts...............$54.90
8" x 17". Fits 3/4" - 1-1/8" mirror loops.
Chrome non-heated plastic mirror w/clamp mounts...........$65.55
8" x 17". Fits 3/4" - 1-1/8" mirror loops.
Black heated plastic mirror w/clamp mounts.......................$62.00
8" x 17". Fits 3/4" - 1-1/8" mirror loops.
Chrome heated plastic mirror w/clamp mounts...................$72.64
8" x 17". Fits 3/4" - 1-1/8" mirror loops.
8" x 8-1/2" West Coast Mirror Heads
611737
Glass Size
6.75 x 6.75"
404
Mirror
System
Rear View
611736
611735 - Left Fender Bracket Assembly, black............$76.48
611736 - Right Fender Bracket Assembly, black..........$76.48
611737 - Convex Mirror Head, black, 6.75" x 6.75"......$55.82
610875
610881
610876
610882
Black non-heated convex mirror w/clamp mounts..............$42.50
8" x 8-1/2". Fits 3/4" to 1-1/8" mirror loops.
Chrome non-heated convex mirror w/clamp mounts..........$54.95
8" x 8-1/2". Fits 3/4" to 1-1/8" mirror loops.
Black heated convex mirror w/clamp mounts......................$48.16
8" x 8-1/2". Fits 3/4" to 1-1/8" mirror loops.
Chrome heated convex mirror w/clamp mounts..................$64.57
8" x 8-1/2". Fits 3/4" to 1-1/8" mirror loops.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS that fit
REPLACEMENT PARTS for
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
43
MIRROR ASSEMBLIES
LOWER MIRROR MOUNT
WEST COAST MIRROR ASSEMBLIES & PARTS
33-79-351
Mirror Arm Loop
Assembly.
Fits Left or Right
(Less Mirror
60-330 or
60-331)
60455
We carry a
replacement
Lower Mirror
Mount
Replaces Lower OEM
Mirror Assembly Mount
Our Lower Door Mirror Mount is suitable for a variety of
Medium to Heavy Duty applications. This replacement restores
the side view mirror to proper operation, helping to reestablish
clear visibility behind and to the sides of the vehicle.
•
•
•
•
High-quality construction for long-lasting durability
Direct replacement for a proper fit
Bolts easily onto the door
Vehicle try-on testing has been conducted on this part to
ensure trouble-free performance
Fits:
• 2002 – 2006 International 3000
• 2002 – 2008 International 4000
• 2002 – 2011 8000
• 2008 – 2011 LoneStar
• 2007 – 2009 ProStar
• 2006 – 2008 RXT
• 2010 – 2011 TerraStar
60-455..........................$25.49
Driver’s side lower mirror mount
60-456..........................$25.78
Passenger side lower mirror mount
33-79-351................................................. $46.30
Aluminum Mirror Arm Loop Assembly w/o Mirror Heads. Can be used
on Left or Right. Fits S Series International/Navistar 1979–Mid 2002
7” x 16” Mirror Heads.
Heated mirrors have a
Bullet Plug that fits
Navistar International
60-310.......$31.23
Non-Heated Mirror Head
60-330...... $53.02
Heated Driver Side
60-331...... $53.02
Heated Pass. Side
7”x16” Heated
Polished Stainless
Steel, w/wire harness
1157-H............$46.26
Heated with harness
without plug.
60-345........... $61.15
Heated with Harness
with plug for Navistar
7”x16” Polished
Stainless Steel
Mirror Heads
1162........... $43.52
Non-Heated
1162-IHO..... $68.50
Heated w/flat plug for
Navistar on harness.
STUD MOUNT SPOT MIRRORS
61-455............$14.02
5” Dia. with Stud &
Clamp on Mtg., center
mount stud, fits all
tubular brackets, Black.
61-457............$14.01
Same but
Stainless Steel
612994........$7.30
Dovetail clamp for 1"
tube, 2 pc clamp
708560.......... $18.61
8-1/2” Dia. Heated
Spot Mirror, stainless
steel, with “L” bracket,
offset stud
61-475............ $20.70
7-1/2” Dia. Spot Mirror.
stainless steel with
“L” bracket, with 1/4”
offset stud
708556... $11.09
8-1/2” Dia. Spot
Mirror with “L”
bracket, center
mount stud
723080...... $5.18
Stainless steel “L”
Bracket for Spot
Mirrors
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
44
REPLACEMENT PARTS for
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
TURN SIGNALS
536-500........... $80.54
Turn Signal Switch, OEM
Navistar Replacement, 7 wire,
Operates up to 10 bulbs
536-545........... $86.86
Turn Signal Switch, OE
Navistar Replacement,
Operates up to 18 lights
• Replaces Navistar
#166355C91
• Replaces Navistar
#2042616C91 & 3566945C91
• Capable of 18 lamps, 9 lamps
per side
• Feature Lift-to-Dim & Flash-to-Pass options
• Brake overrides hazard function lights when brake pedal is
depressed
• 7 wire harness
• Pilot light for turn signal & hazard
warning
• 10 bulb capacity, 5 bulbs per side
536-505........... $86.86
Turn Signal Switch, OEM Navistar
Replacement, Operates up to 16
lights
• Replaces Navistar #2002874C91 &
3566935C91
• Capable of flashing 16 lamps, 8 lamps per side
• Brake overrides hazard function lights when brake pedal is
depressed
536-510............$67.47
Turn Signal Switch, OEM Navistar
Replacement, Operates up to 16 bulbs
•
•
•
•
Replaces Navistar #1663595C91,775863C93
7 wire harness
Pilot light for turn signal & hazard warning
10 bulb capacity, 5 bulbs per side
536-523........... $86.86
Turn Signal Switch, OEM Navistar
Replacement, Operates up to 18
lights
• Replaces Navistar #2042615C91 &
3566944C91
• Capable of 18 lamps, 9 lamps per
side
• Brake overrides hazard function lights when brake pedal is
depressed
• Includes OEM specific connectors for retrofitting
536-530........... $85.59
Turn Signal Switch, International
Navistar Replacement, Operates up to
18 lights
• Replaces Navistar #2042613C91 &
3566942C91
• Capable 18 lamps, 9 lamps per side
• Feature Lift-to-Dim & Flash-to-Pass
options
• Brake overrides hazard function lights when brake pedal is
depressed
536-573........... $90.97
Turn Signal Switch, OEM Navistar
Replacement, Operates up to 16 lights
• Replaces Navistar #200792C91 &
3566939C91
• Capable of 16 lamps, 8 lamps per
side
• Includes self-canceling feature
• Brake overrides hazard function lights when brake pedal is
depressed
• Includes OEM specific connectors for retrofitting
536-596........... $86.50
Turn Signal Switch, OEM Navistar Replacement,
Operates up to 16 lights
•
•
•
•
Replaces Navistar #2034527C91
Capable of 16 lamps, 8 lamps per side
Includes self-canceling feature
Brake overrides hazard function
lights when brake pedal is
depressed
536-525........... $86.86
Turn Signal Switch, OEM Navistar Replacement,
Operates up to 18 lights
• Replaces Navistar #2042613C91 & 3566942C91
• Capable of 16 lamps, 8 lamps
per side
• Features a sealed boot to
eliminate dust intrusion
• Includes self-canceling feature
• Brake overrides hazard
function lights when brake
pedal is depressed
536-526........... $86.86
Turn Signal Switch, OEM Navistar Replacement,
Operates up to 18 lights
• Replaces Navistar #2002875C91 & 3566936C91
• Capable of 16 lamps, 8
lamps per side
• Features a sealed boot to
eliminate dust intrusion
• Includes self-canceling
feature
• Brake overrides hazard
function lights when brake
pedal is depressed
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS that fit
REPLACEMENT PARTS for
45
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
RADIATORS
International
527-487.................. $15.86
Radiator Mount, rubber,
Dim: 1.938" base x 1.5"tall
Replaces OE: 503401C1,
503401C2, 42002055
548-9110.....$210.24
Pressurized Coolant Reservoir with cap
Fits 1990-2016 International 4000 Series
85-099........$97.66
Coolant Reservoir with cap
Fits 2002-2007 International
4000 Series
Replaces OE#: 2602935C91, 2591625C92,
2599039C91, 2602872C91, 2602935C91,
BC4Z8A080A, 4C4Z8B379A (Ford).
Non-direct crossover #: 2039390C3, 2587324C1,
3578833C3
Replaces OE#: 2002105C3
Even more radiators
at MillSupply.com!
239328
•Radiators are built to meet or exceed OEM specifications
•Many radiators offered in Copper/Brass as well as Plastic/Aluminum construction options
•Heavy Duty 4 and 5 row options available for some models
•Depth of Inventory goes beyond the normal top 25 sellers
•Largest in-stock inventory of Truck & Bus Condensers &
Charge Air Coolers. Call us with your needs
Part
Description
Number
239328
239329
239179
239019
239081
238580
230271
238522
Radiator (without cooler) Replaces the
thicker OE aluminium units-exceeds but
transfer requirements for proper cooling. For
radiator with cooler see 239329
Radiator (without cooler) replaces the thicker
OE aluminum units-exceeds but transfer
requirements for proper cooling. Heater
Fitting: 5/8" Hose" x 3/8" NPT
Radiator w/o PTO Crankbox, Full Core.
Crossflow radiator.
Radiator w/o PTO Crankbox, Full Core.
Radiator w/o PTO Crankbox., Full Core.
Oil cooler on grill side. Has extra 1-1/4"
connection on outlet
3 row International / Navistar Radiator w/ 6"
x 6" PTO crank box. 90 degree outlet.
Radiator w/o PTO Crankbox., Full Core.
Supersedes 230328, for 4 row see 238562.
Radiator w/o PTO Crankbox., Full Core.
Straight 2-1/4" lower connection with cooler
on grill side. Without cooler see 238519.
Application
Dimensions
Inlet
Outlet
2-1/4" Lower
Right, 11-1/4" In
Oil
Price
Cooler
04-07 F650-F750, 02-07
International 3000, 3600, 20-5/8"
3800, 4100-4600
25"
1-3/4"
2-1/4" Lower
Left, 11-1/4" In
04-07 F650-F750, 02-07
International 3000, 3600, 20-5/8"
3800, 4100-4600
25"
1-3/4"
2-1/4" Lower
Left, 11-1/4" In
22"
24-7/8"
2-1/4"
2-1/4" Right
Center 14-3/8"
Down
Grill Side - 18"
Centers With
2-1/4" Lower
#12 SAE
Right, 11-1/4" In
Fittings
2-1/4" Left
Center 14-3/8"
None
Down
22"
28-3/8"
2-1/4"
2-1/4" - 17-1/2"
Down
2-1/4" - 17-1/2"
Down
28-3/4"
26-1/4"
2-1/4"
2-1/4" Upper
Right
29-3/4"
26"
2-1/16"
2300, 3000, 3600, 3800,
4900 Series
31"
26"
1-9/16"
2-1/2" Upper
Center
2-1/2" Upper
Center
2-1/2" Lower Left
With Extra 1-1/4"
Connection
2-1/2" Lower
Right
2-1/2" Lower
Right
4400, 7300 Series
30-1/2"
12-1/4" 2-1/16"
2-1/2" Upper
Center
2-1/4" Lower
Left
2005-2007 International
/ Navistar 3000, 3600,
3800, 4100 - 4400
2005-2007 Models 3800,
4100, 4200, 4300, 4400
and 2002-2007 Model
8500
2008-2010 International
4000 Series
None
$464.73
$620.03
$642.61
None
$723.40
Grill Side
$959.71
18" Centers
$992.50
18" Centers
$757.88
Grill Side
$616.15
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
46
REPLACEMENT PARTS for
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
CHARGE AIR COOLER
580-506 - Charge Air Cooler with straight connections
$675.22
CORE HEIGHT... 41-1/4"
Replaces OE: 2508432C1
CORE WIDTH....24-5/8"
Fits: 7600 International/Navistar THICKNESS......... 1-5/8"
580-505 - Charge Air Cooler with connections that
curve up slightly $802.30
Replaces OE: 2004399C1
CORE HEIGHT... 41-1/4"
Fits: 1994-1999 8200,
CORE WIDTH....25-1/8"
1998-2003 9100, 9100I Eagle, THICKNESS......... 1-5/8"
1997-2003 9200, 9200I Eagle,
INLET......................... 4"
OUTLET..................... 4"
1997-2006 9400, 9400I,
1999-2007 9900, 9900I, 9900IX
580-504 - Charge Air Cooler
with connections that curve
up and in slightly. $781.37
Replaces OE: 1696958C1
Fits: 1991-2002 8100 Series
CORE HEIGHT...35-5/8"
CORE WIDTH....25-1/8"
THICKNESS......... 1-5/8"
INLET......................... 4"
OUTLET..................... 4"
580-503 - Charge Air Cooler $561.97
Replaces OE: 1696920C1
Fits: 3000, 4000 Series, Class 6
and S-line, 1994-1999 4900 Series
CORE HEIGHT...23-1/4"
CORE WIDTH.... 12-1/2"
THICKNESS.........2-1/2"
INLET......................... 3"
OUTLET..................... 3"
INLET......................... 4"
OUTLET..................... 4"
580-502 - Charge Air Cooler $663.56
Replaces OE: 1651980C1
CORE HEIGHT........27"
CORE WIDTH......... 19"
Fits: Bluebird Bus,
THICKNESS..............3"
1991-93 9670, 9700 with
INLET........................4"
Cummins N14 Cat 3406 Engines. OUTLET....................4"
580-501 - Charge Air Cooler $666.97
Replaces OE:1646077C1
Fits: Bluebird, Carpenter, Spartan,
3000/4000 Medium Duty Trucks,
S-Line, Class 6 & 7 Fire Trucks
CORE HEIGHT........23"
CORE WIDTH...29 7/8"
THICKNESS........ 1-1/2"
INLET..................3-1/2"
OUTLET..............3-1/2"
Charge Air Cooler Hoses, Hot Air Side
520-605 - 6"L x 3" Dia
520-606 - 6-1/2"L x 3-1/2" Dia
520-607 - 7-1/2"L x 4" Dia.
Charge Air Cooler Hoses, Cold Air Side
520-608 - 6"L x 3" Dia
520-609 - 6-1/2"L x 3-1/2" Dia
520-610 - 6-1/2"L x 4" Dia.
$19.73
$20.31
$27.27
$17.28
$17.57
$23.05
580-500 - Charge Air Cooler $703.50
Replaces OE:
Fits: International 97 4800, 00-01
4700, 95 4700, 90 4700, 99-02
4900,90-97 4900
CORE HEIGHT........24"
CORE WIDTH...33-3/8"
THICKNESS........ 1-5/8"
INLET........................4"
OUTLET....................4"
T-Bolt Clamp, 3/4" Wide Band and Trunion,
Stainless Steel, Spring Loaded
520-600 - T-Bolt Clamp, 3-1/16" to 3-3/8"
$7.94
520-601 - T-Bolt Clamp, 3-3/8" to 3-11/16" $9.58
520-602 - T-Bolt Clamp, 3-9/16" to 3-7/8" $8.03
520-603 - T-Bolt Clamp, 4-1/16" to 4-3/8" $8.98
520-604 - T-Bolt Clamp, 4-9/16" to 4-7/8" $8.30
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS for
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
47
DIESEL FUEL TANKS AND STEPS
50 Gallon Tank
• Height: 16.5"
• Width: 25.25"
• Length: 34.5"
70 Gallon Tank
• Height: 19.5"
• Width: 25.25"
• Length: 40"
581-730
581-743
Drivers
Side
Shown
581-550 - 50 Gallon Right Side Rectangular Steel with Step
Inset. Filler on left, 14"H X 25"W x 38"L $988.80
581-553 - 50 Gallon Left Side Rectangular Steel with Step Inset.
Filler on right, 15"H X 25"W x 37"L $988.80
581-725 - Mount Kit, (2) L Brackets, (2) Straps $375.20
581-730 - 2 Mounting Kit Straps $177.80
581-950.... 50 Gallon Driver Side Aluminum D Tank..................$907.20
581-951.... 50 Gallon Passenger Side Aluminum D Tank..........$907.20
581-970.... 70 Gallon Driver Side Aluminum D Tank...............$1,198.00
581-971.... 70 Gallon Passenger Side Aluminum D Tank.......$1,275.00
548-6106.. Upper fuel tank step, 27-3/4" x 5", Black steel........$156.83
548-6104.. Lower fuel tank step, 32" x 5", Black steel.................$65.06
581-743.... Fuel tank strap with step support. 43.60" long,.......$92.80
2" wide. For use w/50 gallon tanks, 581-950 or 581-951
Replaces OE 3533106C2/C3
581-745.... Fuel tank strap w/o step support. 43.60" long,........$67.20
2"wide. For use w/50 gallon tanks, 581-950 or 581-951
548-6101 - Fuel tank step, 32.8" x 6.5". Painted
black steel. Bolts on strap.
Fits 2001-2011 International $57.31
548-6102 - Fuel tank step, 35.3" x 5". Painted black
steel. Bolts on strap.
Fits 2001-2013 International $47.53
581-465.... $1,365.00
65 Gallon Passenger Side Bus Fuel
Tank. Fits International, Thomas and
Bluebird buses. 66"L x 13"H x 20"D.
581-101.......... $120.62
Fuel Sender
Fits 2002-2011 International
4000 Series
Replaces OE#: 2585993C91
581-104............ $81.86
Fuel Sender
Fits 1997-2011 International
4000 Series
Replaces OE#: 476846C1,
476846C2
548-5102 - 44" x 3" Fuel tank strap for 50 and 60
gallon square tanks. Fits 1997-2011 International.
Replaces OE: 471453C2 $61.81
548-6103 - Fuel tank step, 36" x 6.8". Aluminum.
Bolts on strap.
Fits 2009-2012 International $82.98
FOR UNIVERSAL FILLER
NECKS SEE PAGE 73
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
48
REPLACEMENT PARTS for
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
BRAKE PARTS
D184
D225
510-730
10-699
510-744
510-750
510-785
510-791
510-224
D786, D786A
10-851
10-807
10-827, 10-828
SD647
10-833, 10-834
510-780
4200LP 4300, 4300LP, 4400, 4400LP, 4700, 4700LP
Disc Pads, Brake Shoes and Hardware
Disc Pad Set
Disc Pad Set
Disc Pad Set
Disc Pad Set
Disc Pad Set
Brake Shoe
Drum Brake Kit
1998-2007
1990-1997
F&R
F&R
F&R
F&R
Front
L&R
L&R
L&R
L&R
L&R
1992-2007
1992-2007
510-790
w/66mm dual piston, pin slide caliper. Use with 10-833 caliper
w/73mm dual piston, pin slide caliper. Use with 10-834 caliper
w/2.60 dual piston, rail slide Bendix caliper. Use with 10-827 caliper
w/2.88 dual piston, Bendix Caliper. Use with 10-828 caliper
w/3.38 single piston, rail slide Bendix Caliper
Drive line Parking brake w/9 x 3
Drum brake transmission parking brake kit
D-786
D-786A
D-184
D-225
D-184
SD-647
10-807
$91.71
$90.49
$76.72
$62.84
$76.72
$40.95
$7.40
10-833
10-834
10-827
10-828
510-224
10-928
10-927
10-925
10-924
10-922
10-923
10-851
$117.81
$105.00
$105.60
$91.05
$28.68
$0.85
$1.19
$0.83
$0.38
$4.94
$4.32
$15.99
510-744
510-791
510-785
510-780
510-790
10-699
$135.98
$132.81
$157.23
$272.91
$159.56
$124.44
Calipers and Hardware - NEW NO CORE RETURN
Caliper
Caliper
Caliper
Caliper
Disc Hardware Kit
Anti Rattle Clip
Rubber Bushing
Guide Pin Bolt
Bushing
Guide Pin w/groove
Guide Pin
Brake Hardware Kit
Rotors
Rotor 10 hole
Rotor 10 hole
Rotor 5 hole
Rotor 5 hole
Rotor 6 hole
Rotor 10 hole
1998-2007
1998-2007
1992-1997
1991-1997
1998-2007
1998-2007
1998-2007
1998-2007
1998-2007
1998-2007
1998-2007
1992-1997
F&R
F&R
Front
Rear
F&R
F&R
F&R
F&R
F&R
F&R
F&R
F&R
L&R
L&R
L&R
L&R
L&R
L&R
L&R
L&R
L&R
L&R
L&R
L&R
w/ 66mm dual piston, slide pin style, Casting #4153269. Uses pad D-786
w/ 73mm dual piston, slide pin style, Casting #4153222. Uses pad D-786A
w/2.60" piston dia. Casting #4121733. Uses pad D-184
w/2.88 piston dia. Casting #4150844. Uses pad D-255
10-923
10-922
66mm or 73mm dual piston, pin slide caliper
Brake pad clip, sold each, 4 needed per axle set
Rubber bushing for guide pin, sold each
10-925
10-924
1.5" long, sold each
Used with 10-922, sold each
Used with 10-924, sold each
10-928
10-927
without groove. Sold each
(2) Support Springs, Keys, .025 & .045 shims, caliper bolts
1998-2007
1992-2007
1992-2007
1992-2001
1992-2001
1992-1997
F&R
F&R
F&R
F&R
Front
F&R
L&R
L&R
L&R
L&R
L&R
L&R
w/ hat shape 10 hole rotor, 3.20" tall, cast in ABS exciter
w/ hat shape 10 hole rotor, 4.45" tall, cast in ABS exciter
w/ hat shape 5 hole rotor, cast in ABS exciter ring
w/ U shape 5 hole rotor, 5.9" tall, .771 stud hole
w/ hat shape 6 hole rotor, except ABS
w/ hat shape 10 hole rotor, 4.43" tall
CF500, CF600, CITYSTAR
Rotors
Rotors, standard
Rotors, standard
2006-2007
2006-2007
Front
Rear
L&R
L&R
Hat shape 10 hole rotor, 14.53" dia, 3.88"H, 5.09 hole dia
Hat shape 10 hole rotor, 15.35" dia, 4.89"H, 5.49" hole dia
510-750
510-730
$143.07
$148.00
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS for
07-08
4000 SERIES, S SERIES, & DURASTAR
4300 International DT466 Engine, Max Force DT
3
A
B
6 Cyl.
4300 w/ T444 Turbo Diesel
7
3
MADE IN USA
D
C
2001
MADE IN USA
E
6
5
1
04-05
8 Cyl.
1
1
F
6 Cyl.
00-01 6 Cyl.
96-00 6 Cyl.
MADE IN USA
2
D
G
6
05-06
4
E
E
4300 w/ T466 Turbo Diesel
4300 w/ DT408, DT466 NGD Diesel; w/ Code 07ABC
7
3
5
6
2
L
O
2
4300 w/ VT365 Diesel
3
Dump Stacks availa
ble
at millsupply.com
ALUMINIZED EXHAUST PARTS
rts for
More Exhaust Pa
line
International On-
49
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
6
4
2
L
MADE IN USA
E
P
4300 International w/ DT466 & VT365 Engines
94-99 8 Cyl.
4500, 4700, T444E Diesel Engine; Left Frame Mounted Short Tail Pipe; Code 07AAZ
3
MADE IN USA
MADE IN USA
D
H
E
C
9
5
6
6
1
1
6
V
2
2
L
E
7
4
00-02 6 Cyl. 4300 International DT466 Engine, Left Side Exhaust
7
7
Go to MillSupply.com for our full
selection of exhaust parts!
MADE IN USA
6
3
6
2
L
K
2
M
J
8
N
8
Exhaust Pipes & Mufflers
A....Turbo Pipe...................................557-550....$131.88
M....Extension Pipe............................557-530.. $61.20
B....Extension Pipe............................557-532......$74.88
N....Tail Pipe.......................................557-573.. $61.95
C....Extension Pipe............................557-534......$62.34
O....Turbo Pipe................................. *557-556.$145.47
D....Muffler & Catalytic Converter......557-526.$1,396.28
P....Turbo Pipe................................. *557-558.$124.14
E....Tail Pipe.......................................557-104......$27.09
Q....3” x 18” Flex Pipe..........................57-226.. $23.78
F....Turbo Pipe...................................557-551......$41.82
S....Extension Pipe (140” WB)...........557-539.. $31.24
G....Extension Pipe............................557-536......$28.00
S....Extension Pipe (236-254” WB)....557-535.$118.58
H....Turbo Pipe................................. *557-552......$88.51
T....Extension Pipe (170-206” WB)....557-533.$140.70
H....Turbo Pipe................................. *557-554......$96.83
U....Tail Pipe.......................................557-579.$119.98
J.....Turbo Pipe................................. *557-553....$136.98
V....3.5” x 18” Flex Pipe.....................557-193.. $25.10
K....Extension Pipe............................557-537......$52.73
L....Muffler.........................................557-520....$107.09
Hardware
1... 3” Clamp.........................557-130..... $9.43
2... 4” Clamp.........................557-140... $10.23
3... V Band Clamp................557-154... $21.65
4... Muffler Hanger................557-137... $41.56
5... Rubber Mount.................557-133..... $8.52
6... 3.5” S.S. Band Clamp.....57-228..... $10.55
7... Muffler Hanger................557-176... $53.03
8... Bracket............................557-131... $11.88
9... V Band Clamp................557-153... $18.84
* FREIGHT ITEM
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS for
50
INTERNATIONAL/NAVISTAR
ALUMINIZED EXHAUST PARTS
ailable
Dump Stacks av
at millsupply.com
94-99 6 Cyl.
1
4000 SERIES, S SERIES, & DURASTAR
4000, DT408, DT466 NGD, 530 Diesel Engine; Right Frame Mounted w/o Beverage & Utility Body; Code 07AAY
4
B
2
C
2
D
2
A
MADE IN USA
4000, DT408, DT466E, 530 Diesel Engine;
Left Frame Mounted Muffler; w/ Short Tail Pipe
4
B
2
C
2
D
2
E
F
A
MADE IN USA
C - Std. Cab
D - Exc. Std. Cab
3
94-99 6 Cyl. 4000, DT408, DT466E, 530 Diesel Engine; Right Mounted Muffler; Short Tail Pipe; Codes 07BAG, 07AAY w/ Beverage Body
1
94-99 6 Cyl.
4000, DT408, DT466E, 530 Diesel Engine; Right Cab Mounted Vertical Tail Pipe; (Exc. Allison MT653DR & MT643 Auto Trans.);
4
Codes 07ACX, 07ACY
1
C - Std. Cab
D - Exc. Std. Cab
3
94-99 6 Cyl.
1
800-888-5072 • MillSupply.com
2
4
2
2
G
94-99
6 Cyl. 4000, DT408, DT466E, 530 Diesel Engine; Travelcrew Cab w/ Left Frame Mounted Muffler; Vertical Tail Pipe
4
MADE IN USA
1
E
A
2
2
2
H
F
G
3
2
94-99 8 Cyl.
4
C
4000, T444E Diesel Engine; Right Muffler & Vertical Tail Pipe; Code 07BAC
4
3
1
rts for
More Exhaust Pa
line
nO
l
Internationa
C
3
4000, DT408, DT466E, 530 Diesel Engine; Right Muffler Mounted 8” Back of Cab; Codes 07AMA, 07AAE w/ Short Tail Pipe
2
4
B
2
D MADE IN USA
3
6 Cyl. 4000, DT408, DT466E, 530 Diesel Engine; Right Muffler Mounted 30” Back of Cab; Codes 07AMB, 07AAK w/ Short Tail Pipe
2
2
2
2
2
A
A
1
4
4
A
94-99
4
MADE IN USA
2
B
94-99 6 Cyl.
1
2
MADE IN USA
4000, DT408, DT466E, 530 Diesel Engine;
Right Mounted Muffler; Short Tail Pipe; Code 07AAL w/ Beverage Body
2
2
4
4
4
B
MADE IN USA
94-99 6 Cyl.
H
3
A
B
4
B
A
2
2
4
MADE IN USA
B
4
MADE IN USA
D
H
4
2
J
3
Exhaust Pipes & Mufflers
A.... 3.5” x 20” Flex Pipe.......................57-226.....$23.78
B.... Muffler.........................................557-520...$107.09
C.... Tail Pipe......................................557-104.....$27.09
D.... Tail Pipe......................................557-570.....$36.78
E.... Turbo Pipe...................................557-586...$149.58
F.... Extension Pipe............................557-531.....$49.72
G.... Elbow..........................................557-540.....$23.09
H.... 4” x 18” Flex Pipe........................557-194.....$26.49
J..... Muffler.........................................557-527...$128.69
Hardware
1.... V Band Clamp............................557-154.....$21.65
2.... 3.5” S.S. Band Clamp...................57-228.....$10.55
3.... Muffler Hanger............................557-176.....$53.03
4.... 4” Clamp.....................................557-140.....$10.23
A
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
REPLACEMENT PARTS for
ALUMINIZED EXHAUST PARTS
rts for
More Exhaust Pa
line
nO
l
Internationa
94-99 8 Cyl.
Dump Stacks availa
ble
at millsupply.com
4000 SERIES, S SERIES, & DURASTAR
4000, T444E Diesel Engine; Left Frame Mounted Muffler; Vertical Tail Pipe; Codes 07ACU, 07ACW
1
1993
6 Cyl.
2
4
4000, DT/DTA360; Left Frame Mounted; Long Tail Pipe; Side Exit; Code 07AAV
2
4
B
G
MADE IN USA
1
2
2
2
4
B
4
1993
6 Cyl.
90-92 6 Cyl.
1
E
D
A
94-99
3
8 Cyl. 4000 Travelcrew Cab, T444E Diesel Engine; Right Frame Mounted Muffler; Cab Mounted Vertical Tail Pipe; Code 07ACY
2
2
2
B
MADE IN USA
*1
91-99
1
G
3
C
4
3
6 Cyl. 4000, 4900; DT360, DT408, DT/DTA466 Diesel Engine; Right Mounted Muffler; Long Tail Pipe; Code 07AAX
2
2
K
B
MADE IN USA
4
4
A
4
M
L
3
93-99
1
8
6 Cyl. 4000, DT408, 530, DT466 Diesel Engine; Left Mounted Muffler; Canada & Export Only; Code 07AAP
*1 - 91-95
2
2
2
*5 - 88-90
F
MADE IN USA
H
2
J
91-93
8 Cyl. 4000, T444E Diesel Engine; Left Mounted w/ Long Tail Pipe; Codes 07AAS, 07AAV, 07AAX
4
2
2
2
B
MADE IN USA
A
2
2
F
MADE IN USA
A
C
N
6
6 Cyl. 4000, DT408/DT/DTA466 Diesel Engine; Temporarily Mounted Right Side Muffler; Code 07AAH
2
4
3
4
MADE IN USA
8 Cyl. 4000, 7.3L Diesel Engine; Long Tail Pipe; Right Mounting (Exc. Low Profile) Code 07AAX
8
9
9
8
*R
3
O
3
A
88-99
*5
B
E
A
94-99
7
2
*C - Exc. Crew Cab
*R - Travel Crew Cab
4
4
4700 w/ DT 360 Diesel Engine; Right Side Mounting (Exc. Beverage Body)
4700 w/ DT/DTA 360 Diesel Engine; Right Side Mounting (Exc. Beverage Body)
*C
4
1
3
MADE IN USA
4
4
51
INTERNATIONAL/NAVISTAR
800-888-5072 • MillSupply.com
8
4
P
4
MADE IN USA
Q
10
Exhaust Pipes & Mufflers
A.... 3.5” x 20” Flex Pipe....................... 57-226.... $23.78
B.... Muffler......................................... 557-520.. $107.09
C.... Tail Pipe...................................... 557-104.... $27.09
D.... Elbow.......................................... 557-540.... $23.09
E.... 4” x 18” Flex Pipe........................ 557-194.... $26.49
F.... Muffler......................................... 557-527.. $128.69
G.... Tail Pipe...................................... 557-572.... $64.32
H.... Turbo Pipe (96-97)...................... 557-586.. $149.58
J..... Turbo Pipe (Exc. DT408, DT360).... *557-555.. $124.21
J..... Turbo Pipe (DT360)...................*557-559.... $92.19
K.... Extension Pipe...........................*557-542.... $44.81
L.... Ext. Pipe (140” WB).................... 557-539.... $31.24
L.... Ext. Pipe (170”,176”,206” WB)..... 557-535.. $118.58
L.... Ext. Pipe (206” WB).................... 557-544.... $40.53
M.... Extension Pipe...........................*557-546.. $122.90
N.... Tail Pipe (68” OAL)...................... 557-579.. $119.98
O.... Muffler......................................... 557-525.. $120.24
P.... Extension Pipe............................ 557-530.... $61.20
Q.... Tail Pipe.....................................*557-572.... $64.32
R.... Tail Pipe...................................... 557-570.... $36.78
Hardware
1.... V Band Clamp............................557-154.... $21.65
2.... 3.5” S.S. Band Clamp................... 57-228.... $10.55
3.... Muffler Hanger............................ 557-176.... $53.03
4.... 4” Clamp..................................... 557-140.... $10.23
5.... V Band Clamp............................557-155.... $18.72
6.... Bracket........................................ 557-131.... $11.88
7.... V Band Clamp............................557-153.... $17.18
8.... 2.5” Saddle Clamp........................ 57-250...... $3.83
9.... 2.75” Clamp................................ 557-172...... $7.40
10.. Muffler Hanger............................ 557-188.... $25.90
* FREIGHT ITEM
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. Prices subject to change.
Manufacturer Index
(Manufacturer index is detailed on page 1)
Chevy/GMC............................... 6-16
Ford/Sterling.............................17-20
Freightliner............................... 21-26
Hino.........................................30-31
International.............................38-51
Isuzu........................................32-35
Mitsubishi...................................... 36
Sprinter......................................... 37
UD .............................................. 36
Category Index
Adhesive Sealants........................74
Anti-Slip Paint & Tape...................74
ABS Sensors............................... 29
Back Alarms................................ 96
Brake Line Kit.............................. 29
Rear Bumpers............................. 63
Camera Systems......................... 75
Cargo Control................................ 2
Circuit Breakers........................... 92
Clean Up Products........................74
Dock Bumpers............................. 62
Document Holders....................... 75
Door Hardware....................... 68-72
Door Hold Backs.......................... 69
Draw Bars.................................... 64
E-Track.......................................... 2
Fenders, Poly............................... 65
Fuel Filler Necks, Univ................. 73
Grab Handles.............................. 72
Hinges.................................... 70-72
Hood Latches.............................. 73
Hydromax Brake Booster.................... 27
Lashing Rings.............................. 64
Liftgate.................................... 93-95
Lighting, All............................. 76-92
Lucas Girling Brakes................... 28
Markers........................................ 96
Master Cylinder........................... 27
Mirrors...................... 3, 6, 7, 17, 42, 43
Mud Flaps.................................... 65
Pintle Hooks & Mounts................ 64
Ramps......................................... 62
Reflective Safety Tape................. 96
Receiver Tubes............................ 64
Repair Tape & Panels...................74
Roll-Up Door........................... 52-61
Complete doors...........4-5, 52-53
Todco................................. 54-57
Whiting............................... 58-59
Diamond................................. 60
Hackney & Mickey.................. 61
Rope Rings.................................... 2
Spot MIrrors................................... 3
Steps........................................... 63
Triangle Reflector Set.................. 96
Turn Signal Switches................... 44
Ventilators.................................... 73
Wheel Chocks............................... 2
Wheel Rims................................. 67
Wheel Simulators.................... 66-67
Parts You Can't Forget!
Aluminum
hingeless two
way vent. Door
size: 9-1/2" x 4".
Overall: 12" x 6-1/2"
T-23170-AL.....Vent...... $27.30
M-1653...........Rod........ $5.50
M-1650...........Roller......$1.26
Need a
little more
sound?
This selfadjusting
back up alarm
automatically adjusts to the noise level
outside. Adjusts itself from 87 to 112
decibels.
5”W x 3-3/4”D x 3”H
BA-1040........................$85.98
Sale Price
Good Thru
8/31/2016
$17.25
Set of 3 orange fluorescent
polypropylene triangle reflectors
in a plastic carry case.
M-1361...................Reg. $19.55
Our most
popular
back up
alarm
rated at 97
decibels
gives a clear
Price
warning to all who are behind Sale
Good Thru
8/31/2016
the vehicle. Can be mounted
on any flat surface. Installs with $18.95
back up light or with separate switch.
4”W x 1-9/16”D x 2-1/2”H
87-005........................ Reg. $25.99
Replace one of your 4” round back up
lights with this 97 decibel alarm. When
you switch to reverse the alarm sounds.
(DOT law only requires 1 back up light)
87-026..... Alarm............ $38.49
94993..... Pigtail............. $1.95
40700..... Grommet........ $1.44
Chemical, corrosion, and impact resistant
conspicuity tape. Self adhesive and FMVSS 108
and ASTM D4956 DOT certified.
14-081......12", 6" Red/6" White, 5 pcs................ $4.20
14-083......18", Yellow, 5 pcs.............................. $6.49
14-084......18", 11" Red/7" White, 5 pcs.............. $6.49
14-082......150ft x 2" roll, 11" Red/7" White......$119.40
14-087......150ft x 2" roll, 6" Red/6" White........$119.40
Fluorescent orange
marker kit. Can
be used on front
bumpers, trailers
and other towed
equipment. 3/4” Dia.
Includes 1 pair
153-0031.....36" kit.....$28.85
153-0048.....48" kit.....$32.40
Kaiser Stemco King Pins
• Installs in half the time with half the error!
• 'No-Ream' spiral steel bushing installs by hand
• High chrome, high carbon kin pin withstands
constant turning and pounding
• 'V' grooved king pins and spiral bushings allow
grease to keep bearing lubricated
• Holds up to 300% more grease allowing it to
last 3-4 times longer
• Grease penetrates wear areas
without jacking up the front end
Call or Email us with
your VIN# and we can
get your Kit Quick!
We can Help with all
of your Parts Needs!
Stepvans
Contact Us
Phone: 800-888-5072
Email: [email protected]
MillSupply.com
Online: Fax:888-781-2700
Mill Supply, Inc.
19801 Miles Rd.
Cleveland, OH 44128
Snow Plows
Truck Sheetmetal
BUMPERS
BRAKE HARDWARE
CARGO CONTROL
DOOR HARDWARE
EXHAUST
FUEL TANKS
LIGHTS
LIFTGATE PARTS
MIRRORS
POLY FENDERS
PULL-OUT RAMPS
RADIATORS
ROLL-UP DOOR
WHEEL SIMULATORS

Similar documents

Chevy-GMC - Mill Supply

Chevy-GMC - Mill Supply International............................. 38-51

More information

aftermarket replacement parts catalog 2015

aftermarket replacement parts catalog 2015 COST EFFECTIVE SOLUTION PRODUCT OFFERING Replacements for proprietary parts that fit

More information

Building Permit List

Building Permit List Pole shed Pole shed (storage) Pole barn (personal storage) Pole building - camper/boat storage House w/garage

More information