Hose-Crimp - Australian Distributor for Uniflex

Transcription

Hose-Crimp
PHONE:
- Australian Distributor for Uniflex
03-9794 0602
Email: [email protected]
Warehouse: Factory 20, 191-195 Greens Road, Dandenong South, VIC 3175
www.hosecrimp.net.au
Index
Crimp Machines - Pages 3-13
S1 M
3
S2M / S2P
4
HM200 Ecoline AC & DC
5
S3 Ecoline AC and DC
6
S6 Ecoline AC and DC
7
S7
8
S10 Ecoline
9
S10i
10
HM325iB
11
HM375iB
12
HM480
13
Hose Cutting Saws -Pages 14—19
EM3 Ecoline
14
EM3 DC ( 12v and 24v )
15
EM3
16
EM6.2
17
EM8 P
18
EM115
19
Assembly Equip and Skiving- Pages 20—25
UNE10—Fitting Inserter ( Pneumatic)
20
PR 10—Perforator ( Pin Pricker)
21
RG10—Hose Assembly Flushing / Cleaning
22
UVC - Hose Suction Unit for Cutting Debris
23
USM 2.2 - Manual Skiving Tool
24
USM 10 - Workshop 1 PH Skiving Machine
25
Pressure Testing Units - Pages 26-27
P160 Ecoline
26
P160 or P160B
27
Technical Information and Company Information - Pages 28-30
28—30
S1M – Portable Crimper with Hand Pump Operation
Crimp Force kn/tonne
750 / 75
No Grease Feature
Yes
SAE R12 /4SP (straight
fitting)
90 Deg Elbow Fittings
1”
½”
Industrial Hose
1 ¼”
Max Crimp Range
52mm
Crimp Path (die Size +
10mm)
Max Opening (without
Dies)
Drive Method
10mm
Die Series
261
Oil Capacity
0.32litre
Length x Width x Height
Weight
230 x 180 x 160
15 kg
Dies in Standard Package
( Die Length is 65mm)
Optional Die Sizes Available for Purchase
17,20,24 + Storage Box
6.8, 9, 12, 14, 28,
32,36, 40, 44, 47
52mm
Manual
Description and Features
- The S1M crimper is for the low volume user who has a requirement to crimp hoses in a repair type of
environment rather than production. It is very portable and with a weight of only 15kg it can be easily
taken on site.
- This model is really aimed at the ½” hose market and below but for straight fittings can handle up to
1” 4 wire and 1 ¼” Industrial hoses.
- The machine comes with 3 die sets ( see above) but there is a good range of extra dies which go down
to 6.8mm which is often purchased for crimping of mini-test hoses and small thermoplastic hoses.
- Also available with air foot pump operation as S1P model
- Crimping diameter is set with a micrometer and when crimp diameter is reached a light comes on
( no mechanical dead stop)
Hose-Crimp
PHONE: 03-9794 0602
Warehouse: Factory 20, 191-195 Greens Road , Dandenong South, VIC 3175
Page 3
S2M – Portable Crimper with Hand Pump Operation
S2P - Portable Crimper with Air Pump Operation
No Grease Feature
fitting)
Industrial Hose
Crimp Range
22mm)
Dies)
Drive Method
Die Series
Oil Capacity
Weight
Optional extra Die Sizes
Available for Purchase
900 / 90
Yes
1 ¼ or -20
1” or -16
1 ¼”
63mm
22mm
77 mm
Manual or Air
263
0.75 litre
500 x 420 x 440
32 kg
17,20,24, 28,
32,40 + Storage
Box
6.8, 9, 12, 14, 36,
44, 47





The S2M crimper is for the low volume user who has a requirement to crimp hoses in a repair type
of environment rather than production but wants to crimp bigger hoses than S1M model. It is
reasonably portable with a weight of 32kg it can be easily taken on site or put in a van or UTE
This model is really aimed at the 1” hose market and below in both straight and elbow fittings and
1 ¼” Industrial hoses.
The machine comes with 6 die sets ( see above) but there is a good range of extra dies available
which go down to 6.8mm which is often purchased for crimping of mini-test hoses and small
thermoplastic hoses. The largest die available is 47mm
Also available with air foot pump operation as S2P model and S2A model and S2 DC for single phase
and DC van operation
Crimping diameter is set with a micrometer and when crimp diameter is reached a light comes on
( no mechanical dead stop).
Hose-Crimp
PHONE: 03-9794 0602
Address: Unit 20, 191-195 Greens Road , Dandenong South, VIC 3175
Page 4
HM 200 Ecoline – Available in 1P, 3P and DC models
1300 / 130
No Grease Feature
Yes
fitting)
1 ¼ or -20 ( can
crimp -24 in 2SN
and 4SP with 1
piece fitting)
1,1/2” or -24
Industrial Hose
2”
Maximum Crimp Diameter
70mm
30mm)
Dies)
Drive Method
30mm
Die Series
Oil Capacity (litres)
Weight
( Die Length is 60mm
to75mm)
100 mm
Hydraulic Power
Pack
239
40 AC, 4L DC
model
420 x 535 x 520
88 kg
17,20,24,28,32,
40,44,50
6.8, 9, 12, 14, 16,
19,22,26, 36,
47,54,57,62

The HM200 ecoline crimper is for the workshop volume user who has a requirement to crimp hoses in a
repair or medium production environment in a workshop or mobile van.

This model is really aimed at the 1 ¼” hose market and below in both straight and elbow fittings but is capable of 1 ½” in 2SN or 4SP providing the crimping force required does not exceed 130 tonne.

The machine comes with 8 die sets ( see above) but there is a good range of extra dies available which go
down to 6.8mm and up to 62mm

Crimping diameter is set with a micrometer and limit switch assuring accurate repeatable crimping
PHONE:
03-9794 0602
Address: Unit 20, 191-195 Greens Road, Dandenong South, Vic 3175
Page 5
S3 Ecoline – 1 ¼” Crimper. 1PH, 3PH, DC Options
1200 / 120
No Grease Feature
Yes
fitting)
1 ¼ or -20
Industrial Hose
2”
70mm
35mm)
Dies)
Drive Method
35 mm
Die Series
239, 239L
Oil Capacity
35 litres
Weight
592 x 545 x 672
150 kg
17,20,24, 28,
32,40,44,50
6.8, 9, 12,
14,16,19,22, 26,
36, 47,57,62
1 ¼” or -20
105 mm
AC Version
Hyd Power Unit
DC Version 12v and 24v





The S3 ecoline crimper is for the workshop volume user who has a requirement to crimp
hoses in a repair or medium production environment in a workshop or mobile van.
This model is really aimed at the 1 ¼” hose market and below in both straight and elbow
fittings.
The machine comes with 8 die sets ( see above) but there is a good range of extra dies available which go down to 6.8mm which is often purchased for crimping of mini-test hoses and
small thermoplastic hoses. The largest die available is 62mm
The 1ph and 3ph models come with integral power unit and DC model comes on feet with a
separately mounted 12vDC or 24vDC Power Unit
Crimping diameter is set with a micrometer and limit switch assuring accurate repeatable
crimping
PHONE:
03-9794 0602
Address: Unit 20, 191-195 Greens Road, Dandenong South, VIC 3175
Page 6
S6.2 Ecoline – 2” Crimper. 1PH, 3PH, DC Options
2000 / 200
No Grease Dies Feature
Yes
fitting)
2”or –32
Industrial Hose
3”
Max Starting Crimp Dia
100 mm
Crimp Path die Size+45mm
45 mm
Max Opening (w/o Dies)
147 mm
Drive Method
Hyd Power Unit
Die Series
239, 266L
Oil Capacity
50 litres
Weight
700 x 600 x 735
248 kg AC model
( Die Length 40mm to
110mm ( depend on size)
17,20,24, 28,
32,40,44,50,57,
71+266.239L
6.8, 9, 12,
14,16,19,22, 26,
36,47,54,62,67,
74,78,84,86,92
2” or –32
AC Version
DC Version 12v and 24v





The S6 ecoline crimper is for the workshop ( or mobile) volume user who has a requirement
to crimp hoses in a repair or medium production environment in a workshop or mobile van.
This model is really aimed at the 2” hose market and below in both straight and elbow
fittings.
The machine comes with 10 die sets ( see above) but there is a good range of extra dies
available which go down to 6.8mm which is often purchased for crimping of mini-test hoses
and small thermoplastic hoses. The largest die available is 92mm
The 3ph model comes with integral power unit and DC model comes on feet with a separately mounted 12vDC or 24vDC Power Unit
crimping
PHONE:
03-9794 0602
Page 7
S7 – 2” Crimper. 1PH, 3PH, DC Options
2400 / 240
Yes
SAE R12 /4SP/ R15
(straight fitting)
2”or –32
Industrial Hose
2”
82 mm
Crimp Path die Size+24 mm
24 mm
110 mm
Drive Method
Hyd Power Unit
Die Series
239L, 265
Oil Capacity
2.3 litres
430 x 367 x 682
Weight
77 kg
17,20,24, 28,
32,40,44,50,57,
71+265.239L
6.8, 9, 12,
14,16,19,22, 26,
36,47,54,62,67,
74,78
2” or –32





The S7 crimper is for the workshop ( or mobile) user who has a requirement to crimp
hoses in a repair or medium production environment in a workshop or mobile van.
This model is really aimed at the 2” hose market and below in both straight and elbow
fittings.
available which go down to 6.8mm which is often purchased for crimping of mini-test
hoses and small thermoplastic hoses. The largest die available is 78mm
The 24vDC model is really good for mobile van because a 240 tonne crimp force in a package weighing only 77kg is a nice combination. Best fitted at back or side of van on slide
out rails allowing large heavy and long hoses good access from underneath, giving good
visibility.
Crimp dia is easily set by turning handles until socket touches and then crimp path by
micrometer.
Hose-Crimp
PHONE: 03-9794 0602
Page 8
S10 Ecoline – 2” Crimper. - 3Phase 4 kw
2800 / 280
Yes
SAE R12 /4SP / 4SP / R15
2”or –32
2” or –32
Industrial Hose
4”
139 mm
45 mm
190 mm
Drive Method
Hyd Power Unit
Die Series
239L, 237L
Oil Capacity
50 litres
Weight
690 x 600 x 850
390 kg
17,20,24, 28,
32,40,44,50,57,
71
from6.8mm to
131mm





The S10 ecoline crimper is for the workshop low volume End User who has a requirement to
crimp 2” hoses in a repair environment in a workshop or container on site
This model is really aimed at the 2”hose market and below in both straight and elbow
fittings, but with the added capability of an extra 80 tonnes force than S6.2 Ecoline.
crimping
Can crimp wide range of Industrial hoses up to 4” (depending on crimp force)
PHONE:
03-9794 0602 Email: [email protected]
Address: Unit 20 / 191-195 Greens Road, Dandenong South, VIC 3175
Page 9
S10i – 2” Crimper. - 3Phase 4 kw
2800 / 280
Yes
SAE R12 /4SP / 4SH / R15
2”or –32
2” or –32
Industrial Hose
4”
139 mm
45 mm
190 mm
Drive Method
Hyd Power Unit
Die Series
239L, 237L
Oil Capacity
55 litres
Weight
690 x 600 x 1400
390 kg
17,20,24, 28,
32,40,44,50,57,
71
from6.8mm to
131mm






The S10i crimper is for the workshop volume user who has a requirement to crimp 2” hoses
in a repair or medium production environment in a workshop or container on site
fittings, but with larger opening than S6.2 Ecoline.
crimping
Can crimp wide range of Industrial hoses up to 4” (depending on crimp force)
For further in www.hosecrimp.net.au or contact us below
PHONE:
Address: Unit 20 / 191-195, Greens Road, Dandenong South, VIC 3175
Page 10
HM325iB – 2” Crimper. - 3Phase 4kw
SAE R12 /4SP / 4SH /R15
2800 / 280
Yes
2”or –32
Industrial Hose
Crimp Path die Size+70 mm
Drive Method
Die Series
Oil Capacity
2” or –32
4 ” and 6 “ using
master die using
Industrial die
package
165 mm
70 mm
215 mm
Hyd Power Unit
239, 239L, 237L
100 litres
1200 x 600 x 1700
Weight
750 kg
17,20,24, 28,
32,40,44,50,57,
71
from6.8mm to
131mm





The HM325iB crimper is for the production volume user who has a requirement to crimp 2”
hoses in a repair or high production environment.
fittings, but with the added capability of a touch screen programmable controller
Crimping diameter is set by program and 1000 part numbers can be stored and programmed
Can crimp wide range of Industrial hoses up to 4” but can crimp 6” using master dies. The
Industrial dies package must be purchased to crimp the range of Industrial hoses.
Hose-Crimp
PHONE:
Page 11
HM375iB – 2” Crimper. - 3Phase 4kw
SAE R12 /4SP / 4SH / R15
(straight fitting)
Industrial Hose
3150 / 315
Yes
3”or –48
Drive Method
Die Series
Oil Capacity
165 mm
70 mm
215 mm
Hyd Power Unit
239, 239L, 237L
100 litres
1200 x 600 x 1700
Weight
750 kg
17,20,24, 28,
32,40,44,50,57,
71
from6.8mm to
131mm
3” or –48
4 ” using 237dies and 6 “ using
master dies.






The HM375iB crimper is for the production volume user who has a requirement to crimp up
to 3” hoses in a repair or high production environment.
This model is really aimed at the 3 ”hose market and below in both straight and elbow
fittings, but with the added capability of a touch screen programmable controller
Can crimp wide range of Industrial hoses up to 4” but can crimp 6” using master dies. The
Many optional extras available, mirror, auto back stop, SPC, and rear camera
Hose-Crimp
PHONE:
03-9794 0602
Page 12
HM480 – 3” Crimper. - 3Phase 5.5 kw
SAE R12 /4SP /R15
4500 / 450
Yes
3”or –48
Industrial Hose
3” or –48
6” and up to 8”
using master die
or using Industrial die package
310 mm
150 mm
380 mm
Hyd Power Unit
239L, 237L, 245
300 litres
1590 x 730x 2015
Drive Method
Die Series
Oil Capacity
Weight
2600 kg
17,20,24, 28,
32,40,44,50,57,
71, + 237.239.2L2
+ 245.237L
from6.8mm to
200 mm





The HM480iB crimper is for the production volume user who has a requirement to crimp 3”
hydraulic hoses in a repair or high production environment, large Industrial Hoses up to 10”
in diameter
Can crimp wide range of Industrial hoses up to 8” but will crimp 10” using master dies. The
Many optional extras available, mirror, auto back stop, SPC, and rear camera
Hose-Crimp
PHONE:
03-9794 0602
EM3 Ecoline – 240v AC 1P Cutting Saw
1.8 KW
Hose Capacity
(Workshop) R13 & R15
Hose Capacity ( R12)
( Workshop)
Hose Capacity Industrial
1” or -16
Max OD
52 mm
Noise Level
90 dBA
Brake Motor
No
Suction Connection
40mm
Drive Method
Manual
Cutting Blade
TMG 200x1.6x 25.4
400 x 510 x540
Weight
20 kg
Suction Adaptor Pt No
777.054
1 ¼ or -20
1 ¼” or -20



The EM3ecoline is for the low and medium volume workshop or container use.
Single Phase operation with 1.8 KW Drive
High RPM motor designed for 1P operation
PHONE:
03-9794 0602
Warehouse: Factory 20, 191-195 Greens Road, Dandenong South, VIC 3175
Page 14
EM3 – DC 12V or 24v for Mobile Vans
(2.4 KW for 12V and 2.5 KW for 24V)
Hose Capacity ( (Workshop)
R13 & R15
Hose Capacity
( High Production) R13 &
R15
( Workshop)
1 1/4 or –20
Max OD
80 mm
Noise Level
93 dBA
Brake Motor
No
Suction Connection
40 mm
Drive Method
Manual
Cutting Blade
TM 250x2x40Z
470 x 567 x 365
Weight
29 kg
777.054
3/4 -or –12
1 1/4” or -20
2”



The EM3 DC is designed for mobile van or truck operator
Available in 12v or 24v options
Small, lightweight but powerful unit
PHONE:
03-9794 0602
Address: Unit 20 / 191-195 Greens Road, Dandenong South, Vic 3175
Page 15
EM3 – AC 3P Cutting Saw for Workshop - 1.8 KW
R13 & R15
Hose Capacity
(High Production) R13 & R15
( Workshop)
1 1/4” or –20
Max OD
80 mm
Noise Level
80 dBA
Brake Motor
Yes
Suction Connection
80 mm
Drive Method
Manual
Cutting Blade
TM275x3x30
540 x 440 x 300
Weight
50 kg
777.056
3/4” or –12
1 1/4” or -20
2”



The EM3 is designed for the medium volume workshop or container use.
Three Phase operation with 3 KW Drive
Optional Spiral blade available for customers with large batches of spiral assemblies
PHONE:
03-9794-0602 Email: [email protected]
Page 16
EM6.2 – 3PH Cutting Saw ( 2” Capacity) - 4.6 KW
R13 & R15
Hose Capacity
( Workshop)
2” or –32
Max OD
85 mm
Noise Level
90 dBA
Brake Motor
Yes
Suction Connection
60 mm
Drive Method
Manual
Cutting Blade
TMG 350x3x30
745 x 690 x 430
Weight
75 kg
777.055
1 1/4” or –20
2” or –32
2”




The EM6.2 is designed for medium production workshop cutting up to 2” six wire
hoses
3 Phase Motor with 4.6 KW power
Bench top model with improved handle design for good mechanical advantage
Graduated table allowing pins to be accurately placed by hose size
PHONE:
03-9794 0602
Page 17
EM8P – 3PH Cutting Saw ( 2” Capacity) - Foot Pedal
4.6 KW
R13 & R15
Hose Capacity
( Workshop)
2” or –32
Max OD
120 mm
Noise Level
90 dBA
Brake Motor
Yes
Suction Connection
60 mm
Drive Method
Cutting Blade
Pneumatic Cylinder
and Foot Pedal
TMG 400x4x30
983 x 760 x 540
Weight
140 kg
777.055
1 1/4”” or –20
2” or –32
4”




The EM8 P is designed for medium production workshop cutting up to 2”
six wire hoses
3 Phase Motor with 4.6 KW power
Bench top model with pneumatic foot pedal and cylinder for operator
ease of use
Sliding cover with interlock to provide extra operator safety
PHONE:
03-9794 0602
Address: Unit 20 / 191-195 Greens Road , Dandenong South, VIC 3175
Page 18
EM115 – 3PH Cutting Saw ( 3” Capacity) - Foot Pedal
7.5 KW
Hose Capacity ( (Production)
R13 & R15
Hose Capacity
(Workshop) R13 & R15
( Workshop)
2” or –32
Max OD
125 mm
Noise Level
80 dBA
Brake Motor
Yes
Suction Connection
108 mm
Drive Method
Cutting Blade
Pneumatic Cylinder
and Foot Pedal
TMG 520x4x40
1210 x 650 x 1650
Weight
245 kg
N /A
3” or – 48 ( with
special blade)
3” or –48
3”




The EM115 is designed for high production workshop cutting up to 3” six wire hoses (note special
blade required over 2” size)
Includes cutting counter, feed control, adjustable return speed
Upright model with pneumatic footpedal and cylinder for operator ease of use
Pneumatic cover with interlock to provide extra operator safety.
PHONE:
03-9794 0602
Page 19
UNE10 Hose Fitting Inserter
Working Range
Fittings up to 2”
Force
4.7 kn at 6 bar
Piston Stroke ( pneumatic cyl )
100 mm
Weight
35 KG
L X W X H ( mm)
600 x 810 x 310






This unit is designed for workshops that make hose assemblies in batches
Takes away the need for operator banging hose fittings in with mallet
Interlocked safety cover.
Has multiple adaptors to suit different shaped hose ends
Labour and time savings will pay for machine
Please contact below for quotation or further information. Our website is www.hosecrimp.net.au
Hose-Crimp
PHONE:
03-9794 0602
Page 20
PR 10 Perforating Machine– for Pin Pricking Hoses
Working Range
Hoses up to 45mm OD
Weight
8 KG
L X W X H ( mm)
290 x 150 x 330




This unit is to perforate hose covers for gaseous applications
Maximum Hose OD for this unit is 45mm
Twin Pin Prick wheels for straight line perforation
Fully adjustable perforation depth
Hose-Crimp
PHONE:
Page 21
RG 10 Hose Assembly Cleaning Machine
Flow Rate
180 l /min
Capacity ( litres)
215
Working Range
Up to 2” hoses
Drive Method
Diaphram Air Pump
L x Width x Height
2000 x 840 x 1050
Weight
160 kg
Cleaning Agent
Water Emulsion
Filter
10 micron



This unit is designed for cleaning dirt from hose assemblies without the need to buy projectiles
Unit recirculates cleaning fluid and filters out particles
Fluid is 95% water with a non toxic and anti-corrosion solution added
Hose-Crimp
PHONE:
03-9794 0602
Page 22
UVC Suction Device—Hose Cutting Debris with
Built in Spark Arrester





Designed to attach to most Uniflex cutting saws in order to contain rubber particles
and dust.
Includes a spark arrester which is important to reduce any fire risk from sparks igniting the built of rubber dust collected.
Good investment to protect workers from ingesting minute rubber particles from the
air whilst cutting hoses, especially during multiple cuts
Shows good Health and Safety adherence by management
Different adapters available for different saws.
PHONE:
Address: Unit 20, 191-195 Greens Road , Dandenong South, VIC 3175
Page 23
USM2.2 Manual Skiving - Internal / External
Internal Skiving
5/8” up tp 2”
External Skiving
3/16” up to 2”
Noise Level
N/A
Drive Method
Manual
L x Width x Height
338 x 465 x 445
Weight
32 kg
Tool RPM
N/A




This unit is designed for the predominantly non-skive assember who has an occasional need to Skive
hoses but does not want to invest in a higher cost volume powered skiving machine
Unit is clamped in a vice and the hose is advanced whilst operator is turning the handle
Able to take on site easily or become permanent equipment in mobile van
For quotation or further information contact us below or check our website www.hosecrimp.net.au
Hose-Crimp
PHONE:
Page 24
USM10 Ecoline 1Ph Skiving - Internal / External
Internal Skiving
5/8” up tp 2”
External Skiving
3/16” up to 2”
Noise Level
60 dBA
Drive Method
0.37 KW—1 Phase
L x Width x Height
440 x 440 x 545
Weight
35 kg
Tool RPM
110




This unit is designed for the predominantly for medium batch skiving of hoses
Powered Unit for clean repeatable skiving both Internally and Externally
Unit comes with full tools package
For quotation or further information please contact below or check our website
Hose-Crimp
PHONE:
03-9794 0602
Page 25
P160 Ecoline Hose Test Chamber
Test Pressure
150 bar to 1300 bar
Capacity ( litres)
33
Working Range
Up to 2” hoses
Drive Method
L x Width x Height
Air over water Intensifier
1400x 600 x 1200
Weight
210 kg ( empty)
Testing Liquid
Water Emulsion
Filter
10 micron
Stek O Adaptors (included)
DN 4/6/8/10/12 /
G1/2” (405.901)
R 1/4”, 3/8”, 1/2”
and G 1/2” 405.902
Steck O Adaptors (included)




Uses Staplok adaptors for quick install of next hose assembly
Lifting the lid dumps pressure.
Self purge bleed valve eliminates air from assembly before pressurization
This model is designed for the user that needs test capability on a low volume basis and who wants a
low initial investment but still requires accurate testing capability.
Hose-Crimp
Phone: 03-9794 0602 Email: [email protected]
Page 26
P160 or P160B Hose Test Chamber
Test Pressure
150 bar to 1300 bar
Capacity ( litres)
100
Working Range
Up to 2” hoses
Drive Method
L x Width x Height
Air over water Intensifier
2000 x 840 x 1050
Weight
210 kg ( empty)
Testing Liquid
Water Emulsion
Filter
10 micron
Stek O Adaptors (included)
DN 4/6/8/10/12 /
G1/2” (405.901)
R 1/4”, 3/8”, 1/2”
and G 1/2” 405.902
Steck O Adaptors (included)





Uses Staplok adaptors for quick install of next hose assembly
The ‘B’ version includes touch screen control with laptop connection capability and programming
Lifting the lid dumps pressure.
Self purge bleed valve eliminates air from assembly before pressurization
Larger models and production models available. ( please contact email below)
Hose-Crimp
Phone: 03-9794 0602
Page 27
lle Pressen auf einen Blick
Presskraft
(kN/ton)
Steuerung
all crimpers at a glance Global Range
Geschwindigkeit
SAE R12 /
90°
max.Press- max.Press- Öffnungs- Öffnung o.
GeräuschIndustrie
Backentyp Schliessen / Antrieb
Ecoline
4SP
Bogen
bereich
weg
weg
Backen
pegel
Pressen /
Öffnen
Speed
Crimp force Control
56
SAE R12 /
Industry Elbows
4SP
Crimp
range
Crimp path Opening
Opening
Type of dies
w/o dies
Close /
Crimp /
Open
Drive
Noise level Ecoline
S1M
750 / 75
Micrometer
1”
1 1/4”
1/2”
52 mm
5 mm
+10 mm
52 mm
261
Manuell
Manual
S1P
750 / 75
Micrometer
1”
1 1/4”
1/2”
52 mm
5 mm
+10 mm
52 mm
261
Druckluft
Pressure
S2M
900 / 90
Micrometer
1”
1 1/4”
1”
63 mm
8 mm
+22 mm
77 mm
263
Manuell
Manual
S2P
900 / 90
Micrometer
1”
1 1/4”
1”
63 mm
8 mm
+22 mm
77 mm
263
Druckluft
Pressure
S2A
900 / 90
Micrometer
1”
1 1/4”
1”
63 mm
8 mm
+22 mm
77 mm
263
1 Phase
elektrisch
Electric
S3
1200 / 120
Control A
1 1/4”
2”
1 1/2”
70 mm
8 mm
+35 mm
105 mm
239
4 / 4 / 6,5
3 kW
69 dBA
✓
S4
1800 / 180
B+ Touch
1 1/2”
2”
1 1/2”
70 mm
8 mm
+35 mm
105 mm
239
2,7 / 2,7
4,7
4 kW
69 dBA
✓
S6
2000 / 200
B+ Touch
2”
3”
2”
100 mm
8 mm
+45 mm
147 mm
239L / 266L 9,7 / 2,2 / 16 5,5 kW
69 dBA
✓
S7
2400 / 240
open /
close
2”
2”
1 1/2”
82 mm
8 mm
+24 mm
110 mm
239L / 265
- / 1,42 / -
0,55 kW
70 dBA
S8
2200 / 220
Control A
2”
4”
2”
139 mm
8 mm
+45 mm
190 mm
239L / 237L
6,1 / 1,7 /
10,3
4 kW
69 dBA
S 10
2800 / 280
Control A
2”
4”
2”
139 mm
8 mm
+45 mm
190 mm
239L / 237L
6,1 / 1,7 /
10,3
5,5 kW
69 dBA
HM 200
1300 / 130
Control A
1 1/4”
2”
1 1/2”
70 mm
8 mm
+30 mm
100 mm
239
3,5 / 3,5 /
5,9
3 kW
69 dBA
HM 220
1400 / 140
B+ Touch
1 1/4”
2”
1 1/2”
70 mm
8 mm
+35 mm
105 mm
239
9,5 / 6 / 9,5
5,5 kW
53 dBA
HM 225
1600 / 160
B+ Touch
1 1/4”
2”
1 1/2”
70 mm
8 mm
+40 mm
110 mm
239L
19 / 1,5 / 19
5,5 kW
53 dBA
HM 3 H
700 / 70
B+ Touch
3/4”
2”
1 1/2”
70 mm
8 mm
+35 mm
105 mm
239
8,6 / 8,6 /
10,5
5,5 kW
53 dBA
HM 325
2800 / 280
B+ Touch
2”
4” (6”)
3”
165 mm
20 mm
+70 mm
215 mm
239L / 237L 23 / 1,6 / 33
4 kW
62 dBA
HM 375
3150 / 315
B+ Touch
3”
4” (6”)
3”
165 mm
20 mm
+70 mm
215 mm
239L / 237L 23 / 1,6 / 33
4 kW
62 dBA
HM 380
3400 / 340
B+ Touch
3”
4” (6”)
3”
165 mm
20 mm
+70 mm
215 mm
239L / 237L 23 / 1,5 / 33
4 kW
62 dBA
HM 420
3150 / 315
B+ Touch
2”
6”
3”
165 mm
20 mm
+280 mm
280 mm
239L / 237L 29 / 2,1 / 29
5,5 kW
62 dBA
HM 480
4500 / 450
B+ Touch
3”
10”
3”
310 mm
80 mm
+150 mm
380 mm
239L / 237L /
20 / 1,5 / 23
245
5,5 kW
62 dBA
HM 485
4500 / 450
B+ Touch
3”
10”
3”
250 mm
20 mm
+310 mm
360 mm
239L / 237L /
20 / 1,5 / 23
245
5,5 kW
62 dBA
HM 502
5000 / 500
B+ Touch
3”
5”
2”
180 mm
30 mm
+68,5 mm
240 mm
239L / 237L /
11 / 1,3 / 9,4 7,5 kW
554
62 dBA
HM 660
8000 / 800
B+ Touch
3”
10”
3”
325 mm
50 mm
+ 120 mm
395 mm
239L / 232L /
15 / 2 / 15
246
18,5 kW
69 dBA
HM 665
4500 / 450
B+ Touch
3”
10”
3”
380 mm
50 mm
+ 120 mm
450 mm
239L / 237L /
15 / 2 / 15
247
18,5 kW
69 dBA
HM 1200 12000 / 1200 B+ Touch
3”
10”
3”
325 mm
50 mm
+ 120 mm
395 mm
239L / 237L /
11 / 1,5 / 11 18,5 kW
246
69 dBA
Technische Änderungen vorbehalten. / We reserve the right to make technical changes without notice.
Page 28
✓
Page 29
x
x
Profil 247
245.114.4
Profil 246
x
220.502.4
x
Ø96 / Ø103
232.505.4
Profil 245
Profil 554
x
Profil 237
x
232.504.4
x
x
239.041.4 (sw)
Profil 232
x
239.041.4
x
x
262.129.3
Profil 266
Profil 239
Profil 263
Profil 262
262.104.4
Haltebolzen für Standard Pressbacken / Pins for standard dies / Tourillon de mors standard / Gorrón de
mordza estándar
UNIFLEX
Kunden weltweit
Customer world wide
UNIFLEX INSIDE:
Not everybody who works with UNIFLEX is aware of
using an Uniflex hose crimper, for many leading companies from industries such as fluid power technology,
mechanical engineering or automotive engineering use
Uniflex as an Original Equipment Manufacturer (OEM)
- which means they back on the legendary quality of
Uniflex hose crimpers, often with special modification in
accordance to the particular customer's product portfolio.
So it is little wonder that companies such as
Alfagomma, Anchor, Caterpillar, Eaton, Gates, Hansaflex,
Parker, Pirtek, and many others frequently purchase
"their" hose crimpers from UNIFLEX. Whether as a
provider or as a user of special machinery for hose
production: Make sure you also back on the know-how
and expertise of the innovation leader - we will be glad
to advise you!
Technische Änderungen vorbehalten. / We reserve the right to make technical changes without notice.
Page 30 55
Hose-Crimp
PHONE: 03-9794 0602

Hose-Crimp - Australian Distributor for Uniflex

Transcription

Similar documents

cryogenic Hose

HM200/ HM200 ECOLINE

s2 - workshop crimpers

HM325 - PRODUCTION CRIMPER

QuietLine Installation Guide

ua4 - vertical service crimper

Autocirc® Instant Hot Water Pump

AMT4001 Crimp Tool for Terminals (M22520/40-01)

Novaflex®

RubiCoil

SCP 5000 - Karcher Cleaning Equipment