FOR SALE - Southern Loggin` Times
Transcription
FOR SALE - Southern Loggin` Times
Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] HOSE, FITTINGS & CRIMPERS SERVING THE LOGGING INDUSTRY FOR 20 YEARS. WE CAN SAVE YOU MONEY. email: [email protected] 8309 Tim Alligood Days or Nights: 1-252-341-9891 Feller Buncher Sawblade repairs including straightening mild, severe, complex bends. balancing, crack repairs, cracked center hub, weld worn areas. Carver Sawdisk Service now Carver Sawblade Repair Washington North Carolina 252-945-2358 ZAMBESI EQUIPMENT INC. Wilmington N.C. 5915 TOLL FREE: 1-800-669-5613 566 “Your Reliable Dealer” For The Right Parts Everytime Used Bells For Sale Call Henry RECONDITIONED DELIMBINATORS!! In addition to new machines, CHAMBERS DELIMBINATOR, INC. now has factory reconditioned DeLimbinators. These units have been inspected, repaired, and updated as needed. Call us and we will help you select a DeLimbinator for your need. WE ALSO BUY USED DELIMBINATORS Call: 662-285-2777 day, 662-285-6832 eves Email: [email protected] 1123 1-800-542-3309 Ultra T . . . . . . . . . . . . . . . $20,000 Ultra T . . . . . . . . . . . . . . . $28,000 Slew Boom Truck . . . . . . $70,000 Turn TRASH into CA$H Chip With 7195 Chippers FOR SALE • SHINN Stump Grinder System with Cummins power unit on KOMATSU PC220LC3 Excavator, Ready to work! .........$42,000 • 95 CAT 312 Excavator, 5840 hrs., tight, dry, 80% uc, thumb, 50 hrs. on major service .....................................$28,500 CALL (803) 376-6040 Richard Lindley • Used Equipment Manager • 205-849-4222 Ashley Tucker • Northern Region • 205-849-4393 Bill Baker • Used Equipment Manager – South • 334-215-5207 USED EQUIPMENT FOR SALE: 843J T09106230 ................................$115,000 4985 Hours, Equipped with ROPS and A/C, FD22B Deere head, 28L-26 tires, Front tires approx 80%, Rear tires approx. 20% TK560 T06602471 ...............................$35,000 8430 Hours, Equipped with ROPS cab and A/C, front screen, 5055 tW R50 360 grapple, CTR 426 delimber, mounted on D48HD Evans trailer, tires approx. 30% 720B T09024600 .................................$60,500 12371 Hours, Equipped with ROPS cab and A/C, side screens, D566 Koehring saw head, 28L-26 tires approx. 40% H250B TIIT05440 ...............................$162,500 6603 Hours, Equipped with ROPS high-rise cab and A/C, Waratah processing head model HTH 622B, S/N 622380, 30" Track Pads 337 CHIPPER T12410550...................$252,500 811 Hours, Equipped with a Cat C15 HP engine, 24"x38" throat, opening, 37.5x48" wide drum, (8) 12" long x 6" wide x 5/8" tick single edge Babbitt knives, (4) 11R24.5 tires 648H T08173101 ....................................$CALL 6423 Hours, Equipped with ROPS cab and A/C, side screens, grapple, winch, decking blade, 30.5L-32 tires, front tires approx. 50% VISIT OUR WEBSITE OR CALL US FOR MORE INFORMATION ON MORE OF OUR QUALITY USED EQUIPMENT website: www.thompsontractor.com • email: [email protected] 46 ● SEPTEMBER 2011 ● Southern Loggin’ Times 8611 IRONWORKS IRONWORKS RATES; Space available by column inch only, one inch minimum. Rate is $50 per inch, special typesetting, borders, photo inclusion, blind ads, $10 extra each. Deadlines: By mail, 15th of month prior to publication. Place your ad toll-free 24 hours a day from anywhere in the USA (except Alaska and Hawaii) 1-800-669-5613 ask for Classifieds 8:30-5 pm CST. After business hours our automatic ad taker will take your ads. Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] FINAN C AVAILA ING BLE IF YOU ARE A LOGGER, THEN THIS IS YOUR PARTS RESOURCE CENTER • Preferred Good Credit Plans • Rough Credit Plans CHECK US OUT ON THE WEB. WE HAVE QUALITY USED TIGERCAT, JOHN DEERE, CAT, HYDRO-AX & PRENTICE PARTS AT AFFORDABLE PRICES. (turned down, tax liens, bankruptcies) • Purchases • Refinance • Start-up Business ** CAT 525 Series: 270-5261 Hyd Motor (winch) .............................................$2,800/exc. ** John Deere 648GIII: YZ102149 Pilot Sleeve ..$50 ** Tigercat 7 Series: AT117 Steer Control Valve Assembly...........................................$750 ** Tigercat 620: 7529B Boom/Arch Cylinder (Resealed/Ready) .................................$950/exc ** Tigercat 630B: AW020 Drive Speed Control Valve Assembly ..........................................$350 • Loans Against Your Existing Equipment for QUICK CASH! 2-Hour Approvals! Low Monthly Payments Little or No Down Payments 15 Years In Business CALL NOW 985-875-7373 www.equipmentandparts.com Office : 903-238-8700 • Shane Fuller : 903-235-1147 Bill Bruner : 903 -235-2805 5569 EQUIPMENT FINANCING SKIDDERS CONTACT: 478.550.2330 - Keith 478.256.4063 - Gary 478.550.2375 - RJ Ask For L.T. DEALERS WELCOME 1447 249 Fax: 985-867-1188 Email: [email protected] Personal Service 2007 John Deere 648G-III – 5,200 hours, 30.5 x 32 tires, cab with air. ............................................$89,500 2007 Prentice 2470 Mulcher - FAE 200 Mulching Head, High Pressure pump, 28L tires, Cab with air ...........................................$CALL$ FORESTRYPARTSRESOURCE.COM EUREKA! EUREKA! EUREKA! OWNERS HAVE OVER 30 YEARS COMBINED EXPERIENCE! N EUREKA SAW TOOTH CO., INC. 2005 Prentice 490 Skidder – 6,200 hours, Dual Arch, Very good 43 floatation tires, cab with air, winch, Clean! ................................$59,500 2004 Hydro-Ax 470 Mulcher Fecon BH120 Mulching Head, New Cummins engine, 28L tires, Cab with air ..............................$119,500 7180 We can save you money on Saw Teeth. Hundreds of satisfied ACC OW EP customers. Rebuilt Exchange or New. We specialize in rebuild- CRE TING DIT ing Koehring 2000, Hurricana, Hydro Ax split teeth and all CARDS other brands. Call Jimmy or Niel Mitchell. Quantity Discounts! 4275 Moores Ferry Rd. • Skippers, Virginia 23879 PH./FAX (day) 1-434-634-9836 or Night/Weekends • 1-434-634-9185 DODSON EQUIPMENT CO. 6545 P.O. Box 248 • Dodson, LA 71422 / New & Used Equipment Sales OFFICE PHONE: (318)628-3924 FAX: (318)628-7854 NIGHT PHONE (318)628-2909 (RICHARD) EQUIPMENT FOR SALE LOADERS: 2003 Husky 245 Joystick ................................................................$25,000 2006 Prentice 384 on trailer with delimber ....................................$70,000 2005 Timberjack 430BII on trailer with delimber ...........................$48,000 1994 Husky 335 Trailer mounted with delimber .............................$22,000 2003 Timberjack 460D Grapple Skidder - Dual arch, Winch, Cab with air, 30.5 x 32 tires........$59,500 FELLER BUNCHERS 2002 Hydro-Ax 570 Mulcher Rotary Ax Mulching Head, Cummins engine, 34:00 tires, Cab with air ...........................................$CALL$ LOADERS SKIDDERS: 2004 648GIII 30.5 Tires ..................................................................$42,000 2004 648GIII 43" Tires ....................................................................$37,500 2006 Prentice 490, 30.5 Tires ........................................................$47,500 2005 CAT 525B Single Arch, 30.5 Tires ..........................................$45,000 2005 CAT 525B Dual Arch, 30.5 Tires.............................................$50,000 2002 Franklin Q80C, 34" Tires........................................................$32,500 SHEARS: 2004 Timberking TK540 / Prentice 280 Log Loader – 5,035 hours, Prentice continuous rotating grapple, Cab with air, Trailer mounted ............................................$59,500 2007 Cat 573 Feller Buncher - 225 HP, Waratah FD22 Saw Head, very good 30. x 32 tires, cab with air ...........................................$CALL$ (2) 2004 Timberking 340’s, 28L tires, bunching heads.........$42,000 each 2000 Hydro-Ax 570 FD22 head, 34" tires........................................$35,000 2004 Hydro-Ax 570 28L tires, Quadco bunching head ...................$37,500 2004 Timberking 350 bunching head, 34" 28L tires.......................$37,500 Hydro-Ax 511E, 20" Koehring head, 34" tires........................AS IS $13,000 Please visit our updated web site: www.dodsonequipmentco.com 2006 Hydro-Ax 570 – CP 22 Saw Head, Very good 28L tires, Cab with air, Cummins engine ............$75,000 2005 Cat 525B Grapple Skidder Single arch, Continuous Rotation Grapple, Winch, good 30.5 x 32 tires, Cab with air.................$59,500 *New Salvage Equipment Arriving Daily* Parting out all brands of forestry equipment NOT PICTURED 2007 Cat 573 Mulcher – FAE 300 Mulching Head, High pressure pump, 28L tires, Cab with air. ...........................................$CALL$ 2006 Timberjack 460D Grapple Skidder - Dual arch, Winch, Cab with air, 43" Flotation tires ...$79,500 Southern Loggin’ Times Visa and Mastercard accepted ● SEPTEMBER 2011 ● 47 Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] New & Used Parts Hwy. 59 N. Lufkin, Texas YOUR SOURCE FOR GEAR & HYDRAULIC, DIESEL ENGINES & DRIVE TRAIN COMPONENTS Direct: 936-634-7210 ★ 1-800-IC-PARTS ★ Fax: 936-634-7240 www.aroundtheworldsalvage.com ROCKWELL, EATON, FUNK, COMMERCIAL, BULLDOG, SPICER, DURST, GEAR PRODUCT Alternate Parts & Components We Have Engines, Transmissions & Axles in Stock PARTS & SERVICE New and Rebuilt TRUCKS ● FORESTRY ● CONSTRUCTION Email: [email protected] YOUR SOURCE FOR GEAR & HYDRAULIC, DIESEL ENGINES & DRIVE TRAIN COMPONENTS TOLL FREE 48 ● 1-800-251-2789 SEPTEMBER 2011 ● Southern Loggin’ Times DIRECT 936-829-7278 FAX 936-829-7283 Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] FOR SALE 2003 Timberjack Loader 330B. 7100 hrs. Hudson 250 Delimber. Hudson Slasher. Joystick machine ..................$37,000 Husky Brute 235 Log Loader. 1050 hrs on motor new Cummins 6 cyl. Joystick machine. Cold A/C ........................................................$13,500 Barko 160A on Mack Truck. Cummins 4 cyl. .................. $6,500 Case 580B Forklift. Needs trans work – reverse is out .............$3,500 3191 Kenith (903) 738-9411 894 1995 Timberjack 450C Grapple Skidder. Good condition ...............................................$23,000 More pics available Tigercat shear blades 20" and 18". Way below dealer cost. Other types available. 3723 Office: 1-912-367-0053 • Link 46*5793 334 Cell 1-912-240-7199 3664 Southern Loggin’ Times ● SEPTEMBER 2011 ● 49 Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] 870-723-8212 3578 ARMY 6X6 TRUCKS 2 ⁄ 2 To n 1 ★ 5 To n ★ 1 0 To n Pull Out Trucks Loader Chassis Complete Military Truck Parts Inventory ALL WHEEL DRIVE MEMPHIS EQUIPMENT 766 S. Third • Memphis, TN 38106 901-774-0600 • Fax: 901-946-1919 www.memphisequipment.com • email: [email protected] D61PX-15 Wide Pad Komatsu Dozer, 3124 hours.......$68,000 FOR SALE • 1996 515 Cat, 110" grapple, 28L26 tires, 8700 hrs .........................$32,000 • 1994 Franklin shear 4BT Cummins $8,500 • 2004 Hydragate HG6600 delimber $4,600 • 2-63" Pendo Tracks on 44" tires with Cat 16 hole rims ........................$2,500 • 2-NEW 24.5x32 Firestones, 16 ply $1,150 each • 6-24.5x32 tires mounted on dual rims @98%...............................$1,000 each • 2-30.5x32 tires on dual rims @15% $400 each Please Call: 410-726-6076 3373 – 2001 Tigercat 845B feller buncher, 36" pads, tri-rail, new rails, all new bottom rollers, new main hydraulic pump. Improvements in last years: recon engine, $9500 worth of hydraulic hoses alone, all pumps replaced. 5702 head with 30 degree tilt added, very good condition ................$75,000 – Waratah FL85 felling head, 1 month old. Works GREAT, practically brand new, just don't need it anymore. ............Paid $70K, will take $50,000 251-513-7001 945 FOR SALE 753G 2004 Deere track fellerbuncher about 6000hrs runs and works good has NEW TRACKS --- asking $68,000 318-992-2227 or 2738 318-316-1636 4433 T HE N ATIoN ' s L ARgEsT A Rmy T Ruck D EALER EQUIPMENT FOR SALE FOR SALE 2409 • 2011 John Deere 437D Loader, Pitts trailer, 264 CSI Delimber, 4400 CSI Slasher, 990 hrs. • 2006 Timberking TK360 Feller Buncher w/ 44 floatation tires, 6280 hours. 1046 Hwy 1182 • Plaucheville, LA 71327 Office (318) 922-3706 Fax: (318) 922-3304 Joey’s Cell: (318) 481-1761 Wayne’s Cell: (318) 359-1661 3936 410-430-7468 2974 94 Barko 275E, 1 owner, excellent cond.....$42,000 CHOUPIQUE LOGGING LLC FOR SALE 6209 FOR SALE 50 ● SEPTEMBER 2011 ● Southern Loggin’ Times Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] EASTERN Equipment Top Quality Used Parts Our Specialty Fair Prices Customer Satisfaction Brokerage, Inc. 252-946-9264 Caterpillar Franklin Clark Timberjack John Deere Tree Farmer Hydro-Ax 2006 Hydro-Ax 670 w/22CP sawhead, Deere axles, 44x32 tires .................................$95,000 • 2006 Deere 759G Track Shift-Tilt leveling system, 09 Gilbert 20" 360° rotation saw, single grouser pads .....................$175,000 • 2006 Hultdins 851 Super-Fell continuous rotation for shovels for feller bunchers, for cutting oversize trees ....................$35,000 • 2003 Tigercat 250 Log Loader w/Hultdins grapple, 13837 hours, needs swivel tube replaced, mounted on Evans L-30 trailer .....................................................$20,000 • 2003 Tigercat 860 Track FB w/Tigercat 5702 saw, 11987 hours, 1000 hours on undercarriage ..............................$135,000 • 2002 John Deere 2054 Shovel Loader w/live heel and grapple, 11300 hours, 32" pads .....................................................$57,500 • 1996 Tigercat 726 Rubber Tire Feller Buncher w/Koehring 20" sawhead, Cummins, 30.5x32 tires........................$38,500 • 1985 Ferree 40' Bolt Trailer, moveable center bolsters, 4-sets of bolsters, good tires .......................................................$9,250 • 1994 CTR 550 SDS Self Contained w/Cummins diesel, 5-knife w/saw..............$6,500 • 2007 Tigercat 635 Bogie Grapple Skidder, New Recon Cummins, updated bogie system, dual tires .........................................$175,000 In Business 40 Years P.O. Box 98 • Moncks Corner SC 29461 • 843-761-8220 Fax: 843-899-2492 Night Equip. Sales: Allen Ward — 843-509-0005 Johnny Ward — 843-860-1630 Night Used Parts: Robert Mullinax — 843-569-3513 Toll Free: 800-845-6648 www.wwtractor.com 1926 WATERS INTERNATIONAL New 495ML and 595ML’s in stock with CSI delimbers and slashers available 562 FOR SALE 2815 • 01 & 02 670 Hydro-Ax cutters • High capacity 22" Hydro ax saw head • 03 folding pole trailer w/scales, Texas style 318-548-0927 FOR SALE 6 6X Sales: David Sanders 601-917-7131(cell) 1*57*997 (Southern linc) [email protected] Sales: Ronnie Sims 601-479-4679 (cell) 1*57*789 (Southern linc) [email protected] Parts: Ryan Shelton 1*57*480 (Southern linc) USED EQUIPMENT: • 07 Barko 495 ML/CSI/Trl..$78,500 • 2003 525B 11,000 hrs, 25% rubber ................................................... $28,500 2007 548GIII 4100 hrs, 15% rubber on front, 90% on rears..................... $82,500 334-740-1051 MS Dynamic Dealer for the Dynamic Conehead Chipper throughout MS 7393 65 Hwy 19 North • Meridian, MS 39304 1-800-844-1600 CALL CHARLES or visit website for full specs and details www.eebinc.com Tigercat Prentice Barko Husky Kobelco Timberking 216 • 06 Barko 495 ML/CSI/Trl..$70,000 • 05 Barko 595 ML/CSI/Trl..$60,000 Pictures available for viewing at www.waterstruck.com 6 HEAVY SPEC. X6 LOADER TRUCKS PULL-OUT TRUCKS International • Mack • OshKosh gAAR EquIpmENT sALEs 318/628-2090 Days • 318/628-6416 Nights 318/471-6449 cell 2995 Southern Loggin’ Times ● SEPTEMBER 2011 ● 51 Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] TIDEWATER EQUIPMENT CO. MAC McLAURIN • 910-610-7029 Call or visit our website: www.tidewaterequip.com SKIDDERS (5) CTR 950 D/A and S/A .....$40,000 to $95,000 2009 CAT 525C..................................$131,000 2003 Deere 648GIII D/A ......................$60,000 2004 Deere 648GIII D/A SWEDA ........$73,000 2008 Deere 648H D/A .......................$112,000 2005 Deere 748GIII D/A SWEDA ........$94,000 2009 Deere 843J ...............................$106,250 2003 Deere 848G ................................$33,900 2005 Franklin 80M-36 .........................$33,750 2005 Franklin 80M 36..........................$42,000 2004 Tigercat 620 D/A ........................$72,500 2005 Tigercat 620C S/A SWEDA ......$108,000 2007 Tigercat 620C S/A....................$125,500 2001 Tigercat 630B D/A......................$75,000 2004 Tigercat 630C S/A......................$80,000 2005 Tigercat 630C D/A SWEDA........$95,000 2006 Tigercat 630C D/A....................$120,000 2003 Timberjack 460D ........................$45,000 2004 Timberjack 460D ........................$68,500 2005 Timberjack 460D ........................$68,500 FELLERBUNCHERS 1995 Deere 643 Saw ...........................$26,500 2005 Deere 643H.................................$75,000 2002 Hydro-Ax 411 Ex/20 Saw...........$38,000 2005 Hydro-Ax 670 .............................$79,500 2007 Tigercat 718/5500..........................$120,000 2005 Tigercat 720D/5000 Saw ...........$85,000 2005 Tigercat 822/5702 saw.............$165,000 2006 Tigercat 860C/5702 saw ..........$192,000 LOG LOADERS 1996 Barko 160D.................................$27,000 1998 Barko 160D/CTR 400 .................$26,500 2006 Deere 437C/Rotobec .................$82,500 1997 Peerless 2770/CTR 314 .............$19,000 1998 Prentice 210 ...............................$25,000 2007 Prentice 2280 .............................$81,000 1999 Tigercat 230B/CTR 400 .............$22,500 2005 Tigercat 230B/143 CSI...............$68,500 2005 Tigercat 230B/143 CSI...............$81,000 2003 Tigercat 230B/CTR ....................$62,500 2005 Tigercat 240B .............................$52,500 2005 Tigercat 244 ...............................$56,900 2005 Timberjack 437C ........................$52,500 2004 Timberking 340 ..........................$40,000 2005 Timberking/CTR 450 ..................$49,500 CHIPPERS 2009 Conehead 570 ............................$65,000 2002 Morbark 30NCL Chipper..........$187,500 2009 Morbark 3036 ...........................$162,500 MISCELLANEOUS Assortment of tires and rims for Deere/ Tigercat CTR 314 and 400 Delimbers .........................................$1,000 to $18,000 New/Used Magnum and FECON Mulcher heads (3) K Saws ...........................$5,000 to $10,000 Tigercat Shears and Saws ...$2,500 to $20,000 LIQUIDATION SALE 8 NEW Conehead 585 Chippers 4 NEW Lamtrac 6125 Mulchers 2004 CTR 950..............$25,000 Call to make an offer! View our web site for over 200 listings with newly reduced prices and pictures 2687 2891 52 ● SEPTEMBER 2011 ● Southern Loggin’ Times Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] 770 Day 334-312-4136 Night 334-271-1475 or Email: [email protected] FORESTER Will be expected to be able to supervise Logging crews in Tennessee and Kentucky areas. Send resume to Dept. 1501 • PO Box 2268 Montgomery, AL 36102-2268 1501 WANTED TO BUY 1118 Cat 518 & Cat 518C skidders in TX, LA area Call Kent 936-699-4700 [email protected] 280 FOR SALE • Prentice 410 B loader, 453T, saw package, runs good .......................$9,000 • CTR 500 delimber, excellent shape ......................................................$9,500 Prentice grapple 5055-TWR50 .........$4,500 • 89 Franklin 170, winch, 6BTA Cummins, M33 grapple, good condition....... $15,000 804-224-2026 after 7 or 804-370-5996 cell WANTED EXPERIENCED PROCUREMENT 7951 IF you NEED To buy or sell forestry, construction, utility or truck equipment, or if you just need an appraisal, contact me, Johnny Pynes with JM Wood Auction. Over 25 years experience. VISIT US ONLINE: southernloggintimes.com 3723 Southern Loggin’ Times ● SEPTEMBER 2011 ● 53 Want To Place Your Classified Ad In IronWorks? Call 334-669-7837, 1-800-669-5613 or Email: [email protected] 54 ● SEPTEMBER 2011 ● Southern Loggin’ Times
Similar documents
wanted to buy - Southern Loggin` Times
We Have Engines, Transmissions & Axles in Stock PARTS & SERVICE New and Rebuilt TRUCKS ● FORESTRY ● CONSTRUCTION Email: [email protected]
More informationTOLL FREE: 1-800-669-5613
In addition to new machines, CHAMBERS DELIMBINATOR, INC. now has factory reconditioned DeLimbinators. These units have been inspected, repaired, and updated as needed. Call us and we will help you ...
More information