Toolholder Program

Mori Seiki DuraTurn 2050, 2550 MC
Toolholder Program
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Static Toolholders - Standard Program
OD cutting holder, short
20
48-T00224
T00224
25
48-T00267
T00267
3/4"
48-T00234
T00234
1"
48-T00272
T00272
Face and ID cutting holder
20
48-T03017
T03017
25
48-T03024
T03024
3/4"
48-T03018
T03018
1"
48-T03025
T03025
Cut-off holder, right hand
20
48-T00251
T00251
25
48-T00268
T00268, T00356
3/4"
48-T00252
T00252
1"
48-T00359
T00359, T00357
Boring bar holder
Ø 32
48-T10115
T10115
Ø 1 1/4"
48-T10119
T10119
Combination toolholder
Ø 32
48-T13132
IC 80 bar
T13132
Ø 1 1/4"
48-T13135
IC 80 bar
T13135
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Static Toolholders - Enhanced Program
Cut-off holder, adjustable
SH 32
48-77483
Combination toolholder
Ø 40
Ø 1 1/2"
48-77999
48-80016
IC 80 bar
IC 80 bar
Boring bar holder, with slot
Ø 32
Ø 40
Ø 1 1/4"
Ø 1 1/2"
48-82057
48-82058
48-82059
48-82060
Boring bar holder, double, universal
Ø 20
Ø 3/4"
48-75406
48-75416
Collet face drill holder
ER 32
48-81031
107532000
VDI adapter, left
VDI 30
48-77732
VDI adapter, right
VDI 30
48-78687
Boring bar holder, blank
48-80506
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Driven Toolholders - Performance Series
Face drill/milling unit for ER collets
ER 25
410516103-40
1:1
EC
00675000861
1:1
IC 80 bar
00675000861
T32275, T32297
ER 25
410516104-40
T32288, T32435
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Driven Toolholders - QuickFlex®
OD drill/milling unit
ER-25 QF 420125010-40
1:1
EC
0067725000
1:1
IC 80 bar
0067725000
1:1
EC
0067732000
1:1
IC 80 bar
0067732000
1:1
EC
0067725000
1:1
IC 80 bar
0067725000
1:1
EC
0067732000
1:1
IC 80 bar
0067732000
T32274, T32450
ER-25 QF 420125011-40
T32287
ER-32 QF 420132010-40
T32475, T32484
ER-32 QF 420132011-40
Face drill/milling unit
ER-25 QF 420525010-40
T32275, T32297
ER-25 QF 420525011-40
T32288, T32435
Face drill/milling unit
ER-32 QF 420532010-40
T32476, T32485
ER-32 QF 420532011-40
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Driven Toolholders - Enhanced Program
OD milling unit with combination mill arbor DIN 6358
Ø 16
410216010-40
1:1
EC
00675000854
Ø 22
410222016-40
1:1
EC
00675000483
1:1
EC
00675000483
1:1
EC
00675000932
T32280, T32486
Ø 3/4"
410219003-40
OD drill/milling unit, offset
ER 25
410116050-40
T32279, T32488
ER 25
410116057-40
1:1
IC 80 bar
00675000932
ER 20
410113060-40
1:2
EC
00675000939
ER 20
410113068-40
1:2
IC 80 bar
00675000939
ER 16
410410003-40
1:3
EC
00675000937
ER 16
410410004-40
1:3
IC 80 bar
00675000937
ER 25
410116051-40
2:1
EC
00675000932
ER 25
410116058-40
2:1
IC 80 bar
00675000932
Face drill/milling unit for ER collets
ER-20 QF 420520010-40
1:2
EC
0067720001
ER 20
410513045-40
1:2
IC 80 bar
00675000885
ER-20 QF 420820010-40
1:3
EC
0067720001
ER-20 QF 420820011-40
1:3
IC 80 bar
0067720001
ER-32 QF 420532013-40
2:1
EC
0067732000
ER-32 QF 420532014-40
2:1
IC 80 bar
0067732000
Face milling unit with combination mill arbor DIN 6358
Ø 16
410616013-40
1:1
EC
00675000854
Ø 22
410622022-40
1:1
EC
00675000483
Ø 22
410622029-40
2:1
EC
00675000160
T32292, T32487
Ø 3/4"
410619002-40
1:1
EC
00675000483
Ø 1"
410625002-40
2:1
EC
00675000160
Adjustable angle drill/milling unit
ER 16
411010008-40
1:1
EC
00675000913
ER 16
411010009-40
1:1
IC 80 bar
00675000913
ER 11
411007001-40
1:2
EC
00675000914
ER 11
411007002-40
1:2
IC 80 bar
00675000914
Broaching unit for ID and OD
TN765050 414016000-40
© WTO GmbH * Subject to change without notice * www.wto.de
1:1
EC
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Static Toolholders - Standard Program
Note:
With the assembly of the turrets the breakdown outlines of the respective machine
specification are to be considered!
The application represented here is only an example.
The swing diameters of the turrets depend on machine specificationand turret
version.
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Static Toolholders - Enhanced Program
Note:
With the assembly of the turrets the breakdown outlines of the respective machine
specification are to be considered!
The application represented here is only an example.
The swing diameters of the turrets depend on machine specificationand turret
version.
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Driven Toolholders - Performance Series
Note:
With the assembly of the turrets the breakdown outlines of the respective machine
specification are to be considered!
The application represented here is only an example.
The swing diameters of the turrets depend on machine specificationand turret
version.
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Driven Toolholders - QuickFlex®
Note:
With the assembly of the turrets the breakdown outlines of the respective machine
specification are to be considered!
The application represented here is only an example.
The swing diameters of the turrets depend on machine specificationand turret
version.
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Driven Toolholders - Enhanced Program
Note:
With the assembly of the turrets the breakdown outlines of the respective machine
specification are to be considered!
The application represented here is only an example.
The swing diameters of the turrets depend on machine specificationand turret
version.
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD cutting holder, short
T00224
Item No.
48-T00224
Shaft-Ø
Tool Clamping
40
20
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD cutting holder
T00267
Item No.
48-T00267
Shaft-Ø
Tool Clamping
40
25
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD cutting holder, short
T00234
Item No.
48-T00234
Shaft-Ø
Tool Clamping
40
3/4"
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD cutting holder
T00272
Item No.
48-T00272
Shaft-Ø
Tool Clamping
40
1"
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face cutting holder
T03017
Item No.
48-T03017
Shaft-Ø
Tool Clamping
40
20
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face cutting holder
T03024
Item No.
48-T03024
Shaft-Ø
Tool Clamping
40
25
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face cutting holder
T03018
Item No.
48-T03018
Shaft-Ø
Tool Clamping
40
3/4"
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face cutting holder
T03025
Item No.
48-T03025
Shaft-Ø
Tool Clamping
40
1"
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Cut-off holder, right hand
T00251
Item No.
Tool Clamping
48-T00251
20
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Cut-off holder, right hand
T00268, T00356
Item No.
Tool Clamping
48-T00268
25
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Cut-off holder, right hand
T00252
Item No.
Tool Clamping
48-T00252
3/4"
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Cut-off holder, right hand
T00359, T00357
Item No.
Tool Clamping
48-T00359
1"
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder
External coolant supply
T10115
Item No.
48-T10115
Accessories
Shaft-Ø
Tool Clamping
40
Ø 32
24-T20112...
24-T20124...
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder
External coolant supply
T10119
Item No.
48-T10119
Accessories
Shaft-Ø
Tool Clamping
40
Ø 1 1/4"
24-T20115...
24-T20127...
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Combination holder
Internal and external coolant supply
Max. coolant pressure = 1160 PSI (80 bar)
T13132
Item No.
48-T13132
Shaft-Ø
Tool Clamping
40
Ø 32
Accessories
240032
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Combination holder
Internal and external coolant supply
Max. coolant pressure = 1160 PSI (80 bar)
T13135
Item No.
48-T13135
Shaft-Ø
Tool Clamping
40
Ø 1 1/4"
Accessories
2400125
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Cut-off holder, adjustable
Item No.
48-77483
Shaft-Ø
Tool Clamping
40
SH 32
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Combination holder
Internal and external coolant supply
Max. coolant pressure = 1160 PSI (80 bar)
Item No.
48-77999
Shaft-Ø
Tool Clamping
40
Ø 40
Accessories
240040
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Combination holder
Internal and external coolant supply
Max. coolant pressure = 1160 PSI (80 bar)
Item No.
48-80016
Shaft-Ø
Tool Clamping
40
Ø 1 1/2"
Accessories
240015
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder, with slot
180° reversable
Item No.
48-82057
Shaft-Ø
Tool Clamping
40
Ø 32
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder, with slot
180° reversable
Item No.
48-82058
Shaft-Ø
Tool Clamping
40
Ø 40
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder, with slot
180° reversable
Item No.
48-82059
Shaft-Ø
Tool Clamping
40
Ø 1 1/4"
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder, with slot
180° reversable
Item No.
48-82060
Shaft-Ø
Tool Clamping
40
Ø 1 1/2"
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder, double, universal
180° reversable
Item No.
48-75406
Shaft-Ø
Tool Clamping
40
Ø 20
Accessories
240020
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder, double, universal
180° reversable
Item No.
48-75416
Shaft-Ø
Tool Clamping
40
Ø 3/4"
Accessories
2400075
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Collet face drill holder - for ER style collet
Item No.
48-81031
Shaft-Ø
Tool Clamping
40
ER 32
Accessories
107532000
190032xxx
(not included)
Wrench for ER 32 Collet Chuck
Collets ER 32
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
VDI adapter, left - DIN69880-30
Item No.
48-77732
Shaft-Ø
Tool Clamping
Tool-Ø
40
VDI 30
30
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
VDI adapter, right - DIN69880-30
Item No.
48-78687
Shaft-Ø
Tool Clamping
Tool-Ø
40
VDI 30
30
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Boring bar holder, blank
Item No.
48-80506
Shaft-Ø
40
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
External coolant supply
T32275, T32297
Item No.
410516103-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 25
1-16
Torque(Nm) n2 max(rpm)
40
6,000
Accessories
00675000861
190025xxx
(not included)
Wrenches
Collets ER 25
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
T32288, T32435
Item No.
410516104-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 25
1-16
Torque(Nm) n2 max(rpm)
40
6,000
Accessories
00675000861
191025xxx
(not included)
Wrenches
Collets ER 25 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Straight drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
External coolant supply
T32274, T32450
Item No.
420125010-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-25 QF
1-16
Torque(Nm) n2 max(rpm)
40
6,000
i (n1:n2)
1:1
Accessories
0067725000
190025xxx
320025xxx
(not included)
One-hand Wrenches
Collets ER 25
ER-25QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Straight drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
T32287
Item No.
420125011-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-25 QF
1-16
Torque(Nm) n2 max(rpm)
40
6,000
Accessories
0067725000
191025xxx
(not included)
One-hand Wrenches
Collets ER 25 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Straight drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
External coolant supply
T32475, T32484
Item No.
420132010-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-32 QF
2-20
Torque(Nm) n2 max(rpm)
40
6,000
i (n1:n2)
1:1
Accessories
0067732000
190032xxx
320032xxx
(not included)
One-hand Wrenches
Collets ER 32
ER-32QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Straight drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
Item No.
420132011-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-32 QF
2-20
Torque(Nm) n2 max(rpm)
40
6,000
i (n1:n2)
1:1
Accessories
0067732000
191032xxx
320032xxx
(not included)
One-hand Wrenches
Collets ER 32 sealed, for IC
ER-32QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
External coolant supply
180° reversable
T32275, T32297
Item No.
420525010-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-25 QF
1-16
Torque(Nm) n2 max(rpm)
40
6,000
Accessories
0067725000
190025xxx
(not included)
One-hand Wrenches
Collets ER 25
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
180° reversable
T32288, T32435
Item No.
420525011-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-25 QF
1-16
Torque(Nm) n2 max(rpm)
40
6,000
Accessories
0067725000
191025xxx
(not included)
One-hand Wrenches
Collets ER 25 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
External coolant supply
180° reversable
T32476, T32485
Item No.
420532010-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-32 QF
2-20
Torque(Nm) n2 max(rpm)
40
6,000
i (n1:n2)
1:1
Accessories
0067732000
190032xxx
320032xxx
(not included)
One-hand Wrenches
Collets ER 32
ER-32QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
180° reversable
Item No.
420532011-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-32 QF
2-20
Torque(Nm) n2 max(rpm)
40
6,000
i (n1:n2)
1:1
Accessories
0067732000
191032xxx
320032xxx
(not included)
One-hand Wrenches
Collets ER 32 sealed, for IC
ER-32QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD milling unit with combination mill arbor similar to DIN6358
For cutters with longitudinal and transversal slots
Ratio i=1:1
External coolant supply
Item No.
410216010-40
Shaft-Ø
Tool Clamping
40
Ø 16
Torque(Nm) n2 max(rpm)
40
Accessories
00675000854
(not included)
Wrenches
© WTO GmbH * Subject to change without notice * www.wto.de
6,000
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD milling unit with combination mill arbor similar to DIN6358
For cutters with longitudinal and transversal slots
Ratio i=1:1
External coolant supply
T32280, T32486
Item No.
410222016-40
Shaft-Ø
Tool Clamping
40
Ø 22
Torque(Nm) n2 max(rpm)
40
Accessories
00675000483
(not included)
Wrenches
© WTO GmbH * Subject to change without notice * www.wto.de
6,000
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD milling unit with combination mill arbor similar to DIN6358
For cutters with longitudinal and transversal slots
Ratio i=1:1
External coolant supply
Item No.
410219003-40
Shaft-Ø
Tool Clamping
40
Ø 3/4"
Torque(Nm) n2 max(rpm)
40
Accessories
00675000483
(not included)
Wrenches
© WTO GmbH * Subject to change without notice * www.wto.de
6,000
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
External coolant supply
T32279, T32488
Item No.
410116050-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 25
1-16
Torque(Nm) n2 max(rpm)
40
6,000
Accessories
00675000932
190025xxx
(not included)
Wrenches
Collets ER 25
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
Item No.
410116057-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 25
1-16
Torque(Nm) n2 max(rpm)
40
6,000
Accessories
00675000932
191025xxx
(not included)
Wrenches
Collets ER 25 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:2
External coolant supply
Item No.
410113060-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 20
1-13
Torque(Nm) n2 max(rpm)
16
12,000
Accessories
00675000939
190020xxx
(not included)
Wrenches
Collets ER 20
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:2
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:2
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
Consider coolant pressure diagram D01013!
Item No.
410113068-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 20
1-13
Torque(Nm) n2 max(rpm)
16
12,000
Accessories
00675000939
191020xxx
(not included)
Wrenches
Collets ER 20 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:2
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:3
External coolant supply
Item No.
410410003-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 16
0.5-10
Torque(Nm) n2 max(rpm)
5
18,000
Accessories
00675000937
190016xxx
(not included)
Wrenches
Collets ER 16
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:3
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:3
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
Consider coolant pressure diagram D01013!
Item No.
410410004-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 16
0.5-10
Torque(Nm) n2 max(rpm)
5
18,000
Accessories
00675000937
191016xxx
(not included)
Wrenches
Collets ER 16 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:3
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD drill/milling unit - for ER style collet DIN 6499B
Ratio i=2:1
External coolant supply
Item No.
410116051-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 25
1-16
Torque(Nm) n2 max(rpm)
50
4,000
Accessories
00675000932
190025xxx
(not included)
Wrenches
Collets ER 25
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
2:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
OD drill/milling unit - for ER style collet DIN 6499B
Ratio i=2:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
Item No.
410116058-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 25
1-16
Torque(Nm) n2 max(rpm)
50
4,000
Accessories
00675000932
191025xxx
(not included)
Wrenches
Collets ER 25 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
2:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:2
External coolant supply
180° reversable
Item No.
420520010-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-20 QF
1-13
Torque(Nm) n2 max(rpm)
20
12,000
i (n1:n2)
1:2
Accessories
0067720001
190020xxx
320020xxx
(not included)
One-hand Wrenches
Collets ER 20
ER-20QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:2
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
Consider coolant pressure diagram D01013!
Item No.
410513045-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 20
1-13
Torque(Nm) n2 max(rpm)
20
12,000
Accessories
00675000885
191020xxx
(not included)
Wrenches
Collets ER 20 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:2
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:3
External coolant supply
180° reversable
Item No.
420820010-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-20 QF
1-13
Torque(Nm) n2 max(rpm)
10
15,000
i (n1:n2)
1:3
Accessories
0067720001
190020xxx
320020xxx
(not included)
One-hand Wrenches
Collets ER 20
ER-20QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=1:3
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
180° reversable
Item No.
420820011-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-20 QF
1-13
Torque(Nm) n2 max(rpm)
10
15,000
i (n1:n2)
1:3
Accessories
0067720001
191020xxx
320020xxx
(not included)
One-hand Wrenches
Collets ER 20 sealed, for IC
ER-20QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=2:1
External coolant supply
180° reversable
Item No.
420532013-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-32 QF
2-20
Torque(Nm) n2 max(rpm)
80
4,000
i (n1:n2)
2:1
Accessories
0067732000
190032xxx
320032xxx
(not included)
One-hand Wrenches
Collets ER 32
ER-32QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle drill/milling unit - for ER style collet DIN 6499B
Ratio i=2:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
180° reversable
Item No.
420532014-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER-32 QF
2-20
Torque(Nm) n2 max(rpm)
80
4,000
i (n1:n2)
2:1
Accessories
0067732000
191032xxx
320032xxx
(not included)
One-hand Wrenches
Collets ER 32 sealed, for IC
ER-32QF collet chuck adapter
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face milling unit with combination mill arbor similar to DIN6358
For cutters with longitudinal and transversal slots
Ratio i=1:1
External coolant supply
180° reversable
Item No.
410616013-40
Shaft-Ø
Tool Clamping
40
Ø 16
Torque(Nm) n2 max(rpm)
40
Accessories
00675000854
(not included)
Wrenches
© WTO GmbH * Subject to change without notice * www.wto.de
6,000
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face milling unit with combination mill arbor similar to DIN6358
For cutters with longitudinal and transversal slots
Ratio i=1:1
External coolant supply
Item No.
410622022-40
Shaft-Ø
Tool Clamping
40
Ø 22
Torque(Nm) n2 max(rpm)
40
Accessories
00675000483
(not included)
Wrenches
© WTO GmbH * Subject to change without notice * www.wto.de
6,000
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Right angle milling unit with combination mill arbor similar to DIN6358
For cutters with longitudinal and transversal slots
Ratio i=2:1
External coolant supply
180° reversable
T32292, T32487
Item No.
410622029-40
Shaft-Ø
Tool Clamping
40
Ø 22
Torque(Nm) n2 max(rpm)
80
Accessories
00675000160
(not included)
Wrenches
© WTO GmbH * Subject to change without notice * www.wto.de
4,000
i (n1:n2)
2:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face milling unit with combination mill arbor similar to DIN6358
For cutters with longitudinal and transversal slots
Ratio i=1:1
External coolant supply
Item No.
410619002-40
Shaft-Ø
Tool Clamping
40
Ø 3/4"
Torque(Nm) n2 max(rpm)
40
Accessories
00675000483
(not included)
Wrenches
© WTO GmbH * Subject to change without notice * www.wto.de
6,000
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Face milling unit with combination mill arbor similar to DIN6358 For cutters with
longitudinal and transversal slots
Ratio i=1:1
External coolant supply
Item No.
410625002-40
Shaft-Ø
Tool Clamping
40
Ø 1"
Torque(Nm) n2 max(rpm)
80
Accessories
00675000160
(not included)
Wrenches
© WTO GmbH * Subject to change without notice * www.wto.de
4,000
i (n1:n2)
2:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Adjustable angle drill/milling unit - for ER style collet
Ratio i=1:1
External coolant supply
Item No.
411010008-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 16
0.5-10
Torque(Nm) n2 max(rpm)
16
6,000
Accessories
00675000913
190016xxx
(not included)
Wrenches
Collets ER 16
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Adjustable angle drill/milling unit - for ER style collet
Ratio i=1:1
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
Item No.
411010009-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 16
0.5-10
Torque(Nm) n2 max(rpm)
16
6,000
Accessories
00675000913
191016xxx
(not included)
Wrenches
Collets ER 16 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:1
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Adjustable angle drill/milling unit - for ER style collet
Ratio i=1:2
External coolant supply
Item No.
411007001-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 11
0.5-7
Torque(Nm) n2 max(rpm)
5
12,000
Accessories
00675000914
190011xxx
(not included)
Wrenches
Collets ER 11
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:2
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Adjustable angle drill/milling unit - for ER style collet
Ratio i=1:2
Internal and external coolant supply - Do not run without coolant! Only use filtered
coolant fluid (max. particle size = 100 µm)
Max. coolant pressure = 1160 PSI (80 bar)
Consider coolant pressure diagram D01013!
Item No.
411007002-40
Shaft-Ø
Tool Clamping
Tool-Ø
40
ER 11
0.5-7
Torque(Nm) n2 max(rpm)
5
12,000
Accessories
00675000914
191011xxx
(not included)
Wrenches
Collets ER 11 sealed, for IC
© WTO GmbH * Subject to change without notice * www.wto.de
i (n1:n2)
1:2
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Broaching unit for ID and OD
Ratio i=1:1
External coolant supply
Only clockwise rotation (M3) allowed!
Item No.
414016000-40
Shaft-Ø
Tool Clamping
40
TN765050
Torque(Nm) n2 max(rpm)
25
1,000
i (n1:n2)
1:1
Accessories
(not included)
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Standard reduction sleeves - cylindrical
Reduction sleeve Ø 20
Reduction sleeve Ø 1 1/2"
240020006
240020008
240020010
240020012
240020014
240020016
ø6
ø8
ø 10
ø 12
ø 14
ø 16
2400150038
2400150050
2400150063
2400150075
2400150088
2400150100
2400150125
ø 3/8"
ø 1/2"
ø 5/8"
ø 3/4"
ø 7/8"
ø 1"
ø 1 1/4"
Reduction sleeve Ø 32
240032006
240032008
240032010
240032012
240032016
240032020
240032025
ø6
ø8
ø 10
ø 12
ø 16
ø 20
ø 25
Reduction sleeve Ø 40
240040006
240040008
240040010
240040012
240040016
240040020
240040025
240040032
ø6
ø8
ø 10
ø 12
ø 16
ø 20
ø 25
ø 32
Reduction sleeve Ø 3/4"
2400075025
2400075032
2400075038
2400075050
2400075063
ø 1/4"
ø 5/16"
ø 3/8"
ø 1/2"
ø 5/8"
Reduction sleeve Ø 1 1/4"
2400125038
2400125050
2400125063
2400125075
2400125088
2400125100
ø 3/8"
ø 1/2"
ø 5/8"
ø 3/4"
ø 7/8"
ø 1"
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Reduction sleeves for boring bar holders - cylindrical
Reduction sleeve Ø 32
24-T20112
24-T20114
24-T20116
24-T20118
24-T20120
24-T20122
ø8
ø 10
ø 12
ø 16
ø 20
ø 25
Reduction sleeve Ø 1 1/4"
24-T20115
24-T20117
24-T20119
24-T20121
24-T20123
ø 3/8"
ø 1/2"
ø 5/8"
ø 3/4"
ø 1"
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Reduction sleeves for boring bar holders - cylindrical, extended
Reduction sleeve Ø 32
24-T20124
24-T20126
24-T20128
24-T20130
ø8
ø 10
ø 12
ø 16
Reduction sleeve Ø 1 1/4"
24-T20127
24-T20129
24-T20131
ø 3/8"
ø 1/2"
ø 5/8"
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Reduction sleeves for boring bar holders - morse taper
Reduction sleeve Ø 32
24-T22050
24-T22048
MK 1
MK 2
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Collets DIN 6499B (ER/ESX)
ER 11
190011000
190011010
190011015
190011020
190011025
190011030
190011035
190011040
190011045
190011050
190011055
190011060
190011065
190011070
ER 25
ø 7-0.5
ø 1-0.5
ø 1.5-1
ø 2-1.5
ø 2.5-2
ø 3-2.5
ø 3.5-3
ø 4-3.5
ø 4.5-4
ø 5-4.5
ø 5.5-5
ø 6-5.5
ø 6.5-6
ø 7-6.5
ø 0.276-0.020
ø 0.039-0.020
ø 0.059-0.039
ø 0.079-0.059
ø 0.098-0.079
ø 0.118-0.098
ø 0.138-0.118
ø 0.158-0.138
ø 0.177-0.158
ø 0.197-0.177
ø 0.217-0.197
ø 0.236-0.217
ø 0.256-0.236
ø 0.276-0.256
ER 16
190025000
190025020
190025030
190025040
190025050
190025060
190025070
190025080
190025090
190025100
190025110
190025120
190025130
190025140
190025150
190025160
ø 16-1
ø 2-1
ø 3-2
ø 4-3
ø 5-4
ø 6-5
ø 7-6
ø 8-7
ø 9-8
ø 10-9
ø 11-10
ø 12-11
ø 13-12
ø 14-13
ø 15-14
ø 16-15
ø 0.630-0.039
ø 0.079-0.039
ø 0.118-0.079
ø 0.157-0.118
ø 0.197-0.157
ø 0.236-0.197
ø 0.276-0.236
ø 0.315-0.276
ø 0.354-0.315
ø 0.394-0.354
ø 0.433-0.394
ø 0.472-0.433
ø 0.512-0.472
ø 0.551-0.512
ø 0.591-0.551
ø 0.630-0.591
ø 20-2
ø 3-2
ø 4-3
ø 5-4
ø 6-5
ø 7-6
ø 8-7
ø 9-8
ø 10-9
ø 11-10
ø 12-11
ø 13-12
ø 14-13
ø 15-14
ø 16-15
ø 17-16
ø 18-17
ø 19-18
ø 20-19
ø 0.787-0.079
ø 0.118-0.079
ø 0.157-0.118
ø 0.197-0.157
ø 0.236-0.197
ø 0.276-0.236
ø 0.315-0.276
ø 0.354-0.315
ø 0.394-0.354
ø 0.433-0.394
ø 0.472-0.433
ø 0.512-0.472
ø 0.551-0.512
ø 0.591-0.551
ø 0.630-0.591
ø 0.669-0.630
ø 0.709-0.669
ø 0.748-0.709
ø 0.787-0.748
ER 32
190016000
190016010
190016020
190016030
190016040
190016050
190016060
190016070
190016080
190016090
190016100
ø 10-0.5
ø 1-0.5
ø 2-1
ø 3-2
ø 4-3
ø 5-4
ø 6-5
ø 7-6
ø 8-7
ø 9-8
ø 10-9
ø 0.394-0.020
ø 0.039-0.020
ø 0.079-0.039
ø 0.118-0.079
ø 0.158-0.118
ø 0.197-0.158
ø 0.236-0.197
ø 0.276-0.236
ø 0.315-0.276
ø 0.354-0.315
ø 0.394-0.354
ø 13-1
ø 1-0.5
ø 2-1
ø 3-2
ø 4-3
ø 5-4
ø 6-5
ø 7-6
ø 8-7
ø 9-8
ø 10-9
ø 11-10
ø 12-11
ø 13-12
ø 0.512-0.039
ø 0.039-0.020
ø 0.079-0.039
ø 0.118-0.079
ø 0.157-0.118
ø 0.197-0.157
ø 0.236-0.197
ø 0.276-0.236
ø 0.315-0.276
ø 0.354-0.315
ø 0.394-0.354
ø 0.433-0.394
ø 0.472-0.433
ø 0.512-0.472
ER 20
190020000
190020010
190020020
190020030
190020040
190020050
190020060
190020070
190020080
190020090
190020100
190020110
190020120
190020130
190032000
190032030
190032040
190032050
190032060
190032070
190032080
190032090
190032100
190032110
190032120
190032130
190032140
190032150
190032160
190032170
190032180
190032190
190032200
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
Collets DIN 6499D (ER/ESX) - sealed, for IC
ER 11
191011030
191011040
191011050
191011060
191011070
ER 25
ø3
ø4
ø5
ø6
ø7
191011013-in
191011019-in
191011025-in
ER 16
191016000
191016030
191016040
191016050
191016060
191016070
191016080
191016090
191016100
ø 4-10
ø3
ø4
ø5
ø6
ø7
ø8
ø9
ø 10
191016013-in
191016019-in
191016025-in
191016031-in
191016038-in
191020013-in
191020019-in
191020025-in
191020031-in
191020038-in
191020044-in
191020050-in
ø 4-16
ø3
ø4
ø5
ø6
ø7
ø8
ø9
ø 10
ø 11
ø 12
ø 13
ø 14
ø 15
ø 16
191025013-in
191025019-in
191025025-in
191025031-in
191025038-in
191025044-in
191025050-in
191025056-in
191025063-in
ER 32
ER 20
191020000
191020030
191020040
191020050
191020060
191020070
191020080
191020090
191020100
191020110
191020120
191020130
191025000
191025030
191025040
191025050
191025060
191025070
191025080
191025090
191025100
191025110
191025120
191025130
191025140
191025150
191025160
ø 4-12
ø3
ø4
ø5
ø6
ø7
ø8
ø9
ø 10
ø 11
ø 12
ø 13
191032000
191032030
191032040
191032050
191032060
191032070
191032080
191032090
191032100
191032110
191032120
191032130
191032140
191032150
191032160
191032170
191032180
191032190
191032200
ø 6-20
ø3
ø4
ø5
ø6
ø7
ø8
ø9
ø 10
ø 11
ø 12
ø 13
ø 14
ø 15
ø 16
ø 17
ø 18
ø 19
ø 20
191032013-in
191032019-in
191032025-in
191032031-in
191032038-in
191032044-in
191032050-in
191032056-in
191032063-in
191032075-in
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
ER-20QF
ER-20QF collet chuck adapter
320020010
320020013
ER 16
ER 20
ER-20QF collet chuck adapter
short
320020007-09
ER 11
ER-20QF collet chuck adapter
long
320020007-40
ER 11
ER-20QF Weldon/Whistle
Notch shank adapter
320120006
320120008
320120010
320120012
320120014
3201200250
3201200312
3201200375
3201200500
3201200625
Ø6
Ø8
Ø 10
Ø 12
Ø 14
Ø 1/4"
Ø 5/16"
Ø 3/8"
Ø 1/2"
Ø 5/8"
ER-20QF combination mill
adapter
320220016
3202200750
Ø 16
Ø 3/4"
ER-20QF blank
329020000
ER-20QF protection cover
337020000
ER-20QF master gauge
339120000
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
ER-25QF
ER-25QF collet chuck adapter
320025010
320025013
320025016
ER 16
ER 20
ER 25
ER-25QF master gauge
339125000
ER-25QF collet chuck adapter
short
320025010-07
320025013-09
ER 16
ER 20
ER-25QF collet chuck adapter
long
320025007-40
320025010-50
ER 11
ER 16
ER-25QF Weldon/Whistle
Notch shank adapter
320125006
320125008
320125010
320125012
320125014
320125016
320125018
320125020
3201250250
3201250312
3201250375
3201250500
3201250625
3201250750
Ø6
Ø8
Ø 10
Ø 12
Ø 14
Ø 16
Ø 18
Ø 20
Ø 1/4"
Ø 5/16"
Ø 3/8"
Ø 1/2"
Ø 5/8"
Ø 3/4"
ER-25QF combination mill
adapter
320225016
320225022
320225027
3202250750
3202251000
Ø 16
Ø 22
Ø 27
Ø 3/4"
Ø 1"
ER-25QF blank
329025000
ER-25QF protection cover
337025000
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14
Mori Seiki DuraTurn 2050, 2550 MC
ER-32QF
ER-32QF collet chuck adapter
320032013
320032016
320032020
ER 20
ER 25
ER 32
ER-32QF collet chuck adapter
short
320032013-07
320032016-07
ER-32QF protection cover
337032000
ER-32QF master gauge
339132000
ER 20
ER 25
ER-32QF collet chuck adapter
long
320032007-50
320032010-60
ER 11
ER 16
ER-32QF Weldon/Whistle
Notch shank adapter
320132006
320132008
320132010
320132012
320132014
320132016
320132018
320132020
320132025
3201320250
3201320312
3201320375
3201320500
3201320625
3201320750
Ø6
Ø8
Ø 10
Ø 12
Ø 14
Ø 16
Ø 18
Ø 20
Ø 25
Ø 1/4"
Ø 5/16"
Ø 3/8"
Ø 1/2"
Ø 5/8"
Ø 3/4"
ER-32QF combination mill
adapter
320232016
320232022
320232027
3202320750
3202321000
3202321250
Ø 16
Ø 22
Ø 27
Ø 3/4"
Ø 1"
Ø 1 1/4"
ER-32QF blank
329032000
© WTO GmbH * Subject to change without notice * www.wto.de
08.09.14