CERONIX LCD MONITOR SPECIFICATION and OPERATION

Transcription

CERONIX LCD MONITOR SPECIFICATION and OPERATION
CERONIX LCD MONITOR
SPECIFICATION and OPERATION
MANUAL
13350 N EW A IRPORT R OAD ● A UBURN , CA 95602 ● T EL 530.886.6400 ● F AX 530.888.1065
WWW . CERONIX . COM
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
1
4 YEAR LIMITED WARRANTY
This product is warrantied by CERONIX to be free of defects in
material and workmanship for a period of four years from the date of
purchase. All parts and labor are free of charge during the warranty
period. This warranty does not cover mechanical breakage due to
physical abuse or LCD panel image retention (Stuck Pixels and/or
Burned in Image). On 32” and larger LCDs, the panels have a warranty
of 18 months, and the electronics have the full Ceronix 4 year
warranty. It is the customers responsibility for shipping the defective
unit to and from CERONIX for repair.
Please call Ceronix to obtain RMA number to include with the unit and
ship to:
CERONIX Inc.
13350 New Airport Road
Auburn, CA 95602-7419
Phone: 530-886-6400
FAX: 530-888-1065
WEB: www.ceronix.com
CERONIX will repair the XX0X-LCD monitors after the 4 year warranty for
a minimal charge, plus shipping to and from CERONIX.
13350 N EW A IRPORT R OAD ● A UBURN , CA 95602 ● T EL 530.886.6400 ● F AX 530.888.1065
WWW . CERONIX . COM
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
2
IMPORTANT SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent
the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the
following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
Operation and Installation
• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to the display.
• Unplug the power cord before cleaning the display. A damp cloth is sufficient for cleaning the display. Do not use a liquid or a spray cleaner
for cleaning the product. Do not use abrasive cleaners.
• The display should be operated only from the type of power source indicated on the label.
• The display can be equipped with various connectors that allow for AC or DC power input. Make sure to use the appropriate mating
connector and voltage when connecting to display.
• When connected to a power source, power is always into your display. To totally disconnect the power, unplug the power cord.
• When installing display, always use mounting points provided on the display itself. Do not drill into or modify display housing.
Servicing
• For continued safety, do not attempt to modify circuit boards within the display.
• Disconnect AC or DC power before servicing.
• When the chassis is operating, power supply heat sinks can be potential shock hazards.
• After servicing, always check to see that components, wiring, screws have been properly installed.
Product Safety Note
• Some components used in these display units have special characteristics important to safety. These components can be identified by the
following symbol in the parts list.
If it is necessary to replace these parts be sure to use the parts specified in the parts list.
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
Ce produit est conçu et fabriqué pour opérer dans les limites de design définies et le mauvais usage peut s'ensuivre dans le décharge
électrique ou le feu. Pour empêcher le produit d'être nui, les règles suivantes devraient être observées pour l'installation, utiliser et la
maintenance du produit. Lisez les instructions de sécurité suivantes avant le fait de faire marcher l'étalage. Gardez ces instructions dans un
endroit sûr pour la référence future.
Opération et Installation
• Pour réduire le risque de décharge électrique ou de dommage composant, éteignez le pouvoir avant le fait de raccorder d'autres
composantes à l'étalage.
• Débranchent la corde de pouvoir avant le fait de nettoyer l'étalage. Un tissu humide est suffisant pour nettoyer l'étalage. N'utilisez pas de
liquide ou un appareil de nettoyage de spray pour nettoyer le produit. N'utilisez pas d'appareils de nettoyage abrasifs.
• l'étalage devrait être fait marcher seulement du type de source de pouvoir indiquée sur l'étiquette.
• l'étalage peut être équipé avec les connecteurs différents qui tiennent compte la puissance consommée de courant continu ou du courant
alternatif. Assurez-vous pour utiliser le connecteur s'accouplant approprié et le voltage en raccordant pour afficher.
• Quand raccordé à une source de pouvoir, le pouvoir est toujours dans votre étalage. Pour complètement débrancher le pouvoir, débranchez
la corde de pouvoir.
• en installant l'étalage, utilisez toujours des points montants fournis sur l'étalage lui-même. Ne forez pas dans ou modifiez l'habitation
d'étalage.
Entretien
• Pour la sécurité continuée, n'essayez pas de modifier des cartes de circuit dans l'étalage.
• Débranchent le courant alternatif ou le pouvoir de courant continu avant l'entretien.
• Quand les châssis opère, les éviers de chaleur d'alimentation électrique peuvent être des hasards de choc potentiels.
• Après l'entretien, vérifiez toujours pour voir que les composantes, l'installation électrique, les vis ont été correctement installées.
Note de Sécurité de Produit
• Quelques composantes utilisées dans ces visualisateurs ont des caractéristiques spéciales importantes pour la sécurité. Ces composantes
peuvent être identifiées par le symbole suivant dans la liste de parties.
S'il est nécessaire de remplacer ces parties sont sûr d'utiliser les
parties spécifiées dans la liste de parties.
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
3
TABLE OF CONTENTS
1. Warranty Information
2. Safety Instructions
3. Table of Contents
4. General Description
5. General Features
6. Electrical and Panel Specifications
7. Application Timing
8. Basic Controls and Connections
9. Mechanical and Environmental Specifications
10. Mechanical Rendering
11. A/D Controller Board, CPM2940
12. OSD Navigation, CPM2940
13. Burn-In Mode, CPM2940
14. A/D Controller Board Pin Description, CPM2940
15. A/D Controller Schematic Power, CPM2940
16. A/D Controller Schematic Scaler, CPM2940
17. A/D Controller Schematic Panel Interface, CPM2940
18. A/D Controller Schematic D-SUB DVI Input, CPM2940
19. A/D Controller Schematic Key Button, IR Receiver, CPM2940
20. A/D Controller Schematic HDMI, CPM2940
21. A/D Controller Board, CPM3044
22. OSD Navigation, CPM3044
23. Burn-In Mode, CPM3044
24. A/D Controller Board Pin Description, CPM3044
25. A/D Controller Schematic Power, CPM3044
26. A/D Controller Schematic Scaler, CPM3044
27. A/D Controller Schematic Panel Interface, CPM3044
28. A/D Controller Schematic D-SUB DVI Input, CPM3044
29. A/D Controller Schematic Key Button, IR Receiver, CPM3044
30. A/D Controller Schematic HDMI, CPM3044
31. A/C to DC Power Supply, CPM2201A
32. A/C to DC Power Supply, CPM2405
33. 24V 2-Lamp Inverter, CPM2236A
34. 24V 4-Lamp Inverter, CPM2253A
35. 24V 6-Lamp Inverter, CPM2469A
36. 12V 4-Lamp Inverter, CPM2237A
37. 12V 2-Lamp Inverter, CPM2772
38. 24V 23” LED Driver, CPM3007
39. 24V 21.5”and 22” LED Driver, CPM3057
40. LCD Label with Identification Code
41. LCD Identification Code
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
P2
P3
P4
P5
P5
P6
P7-9
P10-12
P13-32
P33
P34
P35-39
P39
P40-46
P47
P48
P49
P50
P51
P52
P53
P54-59
P59
P60-65
P66
P67
P68
P69
P70
P71
P72-73
P74-75
P76-77
P78-79
P80-81
P82-83
P84-85
P86-87
P88-89
P90
P91-93
4
4. General Description
This specification and operation manual defines the characteristics and
performance of the Ceronix LCD Monitors. This product is capable of displaying
resolutions from VGA to HD. The built in A/D controller is capable of displaying
up to 16,777,216 colors based on its red, green, and blue analog video input.
Video synchronization signals of applicable resolution modes can be
automatically detected in the range of 15.5kHz to 80kHz horizontal and 56Hz to
75Hz vertical. Unless otherwise specified, the product shall meet the
specifications described in this document.
5. General Features
Native Resolution:15”(1024x768 Pixels),17” (1280x1024), 19” (1280x1024),
20” (1600x900), 20.1” (1680x1050), 21.5” (1920x1080), 22” (1680x1050),
23” (1920x1080), 26” (1366x768), 32” (1920x1080), 40” (1920x1080),
46” (1920x1080), 55” (1920x1080)
Color: 16,777,216 (8 Bit Color)
Input:
1. 15-Pin H-Dsub Analog RGB (0.7Vp-p, 75ohm, H/V Sync, TTL)
Horizontal Frequency Range: 31.5kHz~80kHz
Vertical Frequency Range: 56~75Hz
2. 24-Pin DVI-D
Controls:
1. OSD navigated keypad with Menu, Up, Down, Select, and Power.
2. Optional Infra-red remote control.
OSD Menu:
Contrast Brightness, Color Adjust, H-Position, H-Size, V-Position, Language,
Reset, Signal Source.
Mechanical Flexibility:
Monitor Chassis designed to fit into numerous applications with existing
mounting studs or with adapter brackets.
Optional Touch Sensor allows for interactive display.
Infra-Red remote allows for easy adjustment.
All electrical components designed for long life and running in industrial and
gaming applications
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
5
6. Electrical and Panel Specifications
Panel
TFT Active Matrix VA (Vertical Alignment)
TFT Active Matrix TN (Twisted Nematic)
Viewable Size
15”, 17”, 19”, 20”, 20.1”, 21.5”, 22”, 23”, 26”, 32”, 40”, 46”, 55”
Native Resolution
15” 1024x768; 17” 1280x1024, 19” 1280x1024; 20” 1600x900; 20.1”
1680x1050; 21.5” 1920x1080; 22” 1680x1050; 23” 1920x1080; 26”
1366x768; 32” 1920x1080; 40” 1920x1080; 46” 1920x1080; 55”
1920x1080
Aspect Ratio
15” 4:3, 17” 5:4, 19” 5:4; 20” 16:9, 20.1” 16:10, 21.5” 16:9, 22” 16:10,
23” 16:9, 26” 16:9, 32” 16:9, 40” 16:9, 46” 16:9, 55” 16:9
Pixel Size (mm)
0.297(15”), 0.264(17”), 0.294(19”), 0.2768(20”), 0.285(20.1”), 0.24825
(21.5”), 0.282(22”), 0.2655(23”), 04215(26”), 0.5107(32”), 0.4612(40”),
0.5302(46”), 0.630(55”)
Brightness (Typical)
250 cd/m2 — 1500 cd/m2
Contrast Ratio
500:1 – 5000:1
Response Time (Sum of Tr, Tf in mS)
5 — 20
Colors Supported
16.7 Million
Viewing Angle
178° in Horizontal and Vertical Directions (VA) 170°H, 165°V (TN)
Interface
Analog & Digital
Input Connectors
RGB 15-Pin D-Sub, DVI-D
Signal Frequency
15.5-80KHz Horizontal, 56-75Hz Vertical
Power/Voltage (XX05-LCD)
25-35W, 90 - 264VAC, 50/60Hz, 75W(26”), 125W(32”), 200W(40”), 200400W(46”),
Voltage (XX07-LCD)
12Vdc, 24Vdc
Voltage (XX08-LCD)
24Vdc
Voltage (XX09-LCD)
5Vdc, 12Vdc, 24Vdc
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
6
7. Application Timing
RESOLUTION
VERTICAL FREQUEENCY
HORIZONTAL FREQUENCY
PIXEL FREQUENCY
640 x 400
70 Hz
31.46 kHz
720 x 400
70 Hz
31.46 kHz
640 x 480
60 Hz
31.50 kHz
25.175 MHz
640 x 480
72 Hz
37.90 kHz
31.500 MHz
640 x 480
75 Hz
37.50 kHz
31.500 MHz
800 x 600
60 Hz
37.90 kHz
40.000 MHz
800 x 600
72 Hz
48.10 kHz
50.000 MHz
800 x 600
75 Hz
46.90 kHz
49.500 MHz
1024 x 768
60 Hz
48.40 kHz
65.000 MHz
1024 x 768
70 Hz
56.50 kHz
75.000 MHz
1024 x 768
75 Hz
60.00 kHz
78.750 MHz
1280 x 1024
60 Hz
64.00 kHz
108.000 MHz
1280 x 1024
75 Hz
80.00 kHz
135.000 MHz
1366 x 768
60 Hz
47.75 kHz
85.860 MHz
1680 x 1050
60 Hz
65.30 kHz
146.500 MHz
1920 x 1080
60 Hz
67.50 kHz
148.500 MHz
The XX0X-LCD series monitors support the video timings listed above. There
are many different video cards and video signal formats in gaming and
industrial applications. In general, the video signal of various VGA cards are
compatible with VESA recommendations, but many legacy gaming machines
are not. The Ceronix XX0X-LCD is designed under the assumption that every
video signal is standardized, therefore some signals may not lock in perfectly
during auto-signal detect. To avoid this compatibility issue, the Ceronix XX0XLCD has been tested with popular VGA cards and various gaming machines.
The compatibility can be up-dated as soon as a new signal can be evaluated.
The following procedure should be followed if the controller board is not
displaying an image correctly.
It is best to display an image that has a full window of active video. This allows
the monitor to detect and center the image on the display.
If the image does not fill the screen and center itself after power up, press the
“SELECT” button. The display will attempt to adjust the image so that it fills the
screen. If the image is centered and fills the screen, try recycling the power to
the display. If the image appears centered and fills the screen, then the autodetect functioned properly.
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
7
7. Application Timing, CPM2940
If the image is shifted or does not fill the screen after cycling the power, please
try the following. Using the OSD buttons, navigate to the image adjustment
window (see below)
Using the “LEFT RIGHT”, “DOWN UP”, and “HORIZONTAL SIZE” functions,
adjust the display so that the image is centered and fills the screen. Press the
“MENU” button the suppress the OSD. Cycle power to the display. If the
image appears centered and fills the screen then the monitor has stored the
new settings properly.
If the image is shifted or does not fill the screen after cycling the power, please
contact Ceronix and provide the following information.
VIDEO SOURCE (CHECK ONE)
VIDEO CARD
GAMING MACHINE
MANUFACTURER
MODEL NUMBER
DATE OF MANUFACTURE
NAME OF GAME
RESOLUTION
HORIZONTAL FREQUENCY
H-SYNC PULSE WIDTH
H-SYNC PULSE DELAY
VERTICAL FREQUENCY
V-SYNC PULSE WIDTH
V-SYNC PULSE DELAY
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
8
7. Application Timing, CPM3044
If the image is shifted or does not fill the screen after cycling the power, please
try the following. Using the OSD buttons, navigate to the image adjustment
window (see below)
Using the “LEFT RIGHT”, “DOWN UP”, and “HORIZONTAL SIZE” functions,
adjust the display so that the image is centered and fills the screen. Press the
“MENU” button the suppress the OSD. Cycle power to the display. If the
image appears centered and fills the screen then the monitor has stored the
new settings properly.
If the image is shifted or does not fill the screen after cycling the power, please
contact Ceronix and provide the following information.
VIDEO SOURCE (CHECK ONE)
VIDEO CARD
GAMING MACHINE
MANUFACTURER
MODEL NUMBER
DATE OF MANUFACTURE
NAME OF GAME
RESOLUTION
HORIZONTAL FREQUENCY
H-SYNC PULSE WIDTH
H-SYNC PULSE DELAY
VERTICAL FREQUENCY
V-SYNC PULSE WIDTH
V-SYNC PULSE DELAY
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
9
8. Basic Controls and Connections
The Ceronix LCD Monitors have two methods for controlling or adjusting display
parameters during operation. A 5-Button keypad is available on the electronic
cover as shown below
POWER ­ Use this button to turn display on or off .
SELECT/AUTO ­ When OSD image not shown use this button to AUTOADJUST image on display. Display should automatically adjust image to fit
within display area. When OSD image is showing use this button to select
adjustment item.
DOWN ­ Use this button to decrease value of adjustment item.
UP ­ Use this button to increase value of adjustment item.
MENU ­ Use this button to make OSD image appear or disappear.
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
10
8. Basic Controls and Connections
As an option a Infra-Red (IR) Remote control adjustment feature is available. The infrared receiver module is generally located on the underside of the electronic cover near
video input connectors as shown below. By pointing IR Remote Transmitter at
Receiver and pressing buttons adjustment of display can be accomplished.
POWER ­ Use this button to turn display on or off .
SELECT/AUTO ­ When OSD image not shown use this
button to AUTO-ADJUST image on display. Display
should automatically adjust image to fit within display
area. When OSD image is showing use this button to
select adjustment item.
DOWN ­ Use this button to decrease value of
adjustment item.
UP ­ Use this button to increase value of adjustment
item.
MENU ­ Use this button to make OSD image appear or
disappear.
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
11
8. Basic Controls and Connections
1. DIGITAL VIDEO IN ­ DVI-D video input
2. A/C IN ­ A/C power input. Plug in IEC A/C power cord here.
3. ANALOG VIDEO ­ DB9-HD15P VGA connector analog video input.
4. INFRA-RED REMOTE RX ­ Infra-Red Remote receiver module.
1
3
4
2
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
12
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
10.394” x 13.228” x 2.696” (150X-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
13
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
14.344” x 11.841” x 2.639” (170X-LCD) TN
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
14
8. Mechanical & Environmental Specifications
9.
Dimensions (W x H x D)
15.968” x 13.173” x 2.805” (190X-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
15
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
18.597” x 11.123” x 2.787” (200X-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
16
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
18.464” x 12.084” x 2.787” (201X-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
17
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
19.902” x 11.902” x 2.824” (215X-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
18
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
19.815” x 13.020” x 2.806” (220X-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
19
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
21.412” x 12.680” x 2.557” (230X-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
20
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
25.974” x 15.109” x 3.535” (2605-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
21
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
24.786” x 14.834” x 3.535” (2605-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
22
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
29.921” x 19.838” x 3.555” (3205-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
23
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
29.921” x 19.425” x 4.49” (3205-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
24
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
29.92” x 19.103” x 3.43” (3205-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
25
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
29.92” x 17.72” x 3.50” (3205-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
26
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
35.9” x 20.6” x 3.9” (4005-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
27
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
35.9” x 20.6” x 3.95” (4005-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
28
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
41.2” x 23.6” x 3.9” (4605-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
29
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
41.2” x 23.6” x 3.96” (4605-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
30
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
41.2” x 23.6” x 4.2” (4605-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
31
9. Mechanical & Environmental Specifications
Dimensions (W x H x D)
48.9” x 28.1” x 4.3” (5505-LCD)
Environment
Operational 0° to 70°C, Humidity 5% to 90% Non-Condensing
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
32
10. Mechanical Rendering
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
33
11. A/D Controller Board
Ceronix Part Number CPM2940
CONNECTOR DESCRIPTION
PIN COUNT
CN2
DC INPUT
6
CN3
TOUCH POWER
3
CN6
AUTO DIM
5
CN7
LCD LVDS
32
CN8
INVERTER CONTROL
7
CN10
DVI INPUT
25
CN11
VGA ANALOG INPUT
15
CN13
OSD KEY PAD
9
CN15
IR BOARD
4
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
34
12. OSD Navigation, CPM2940
CONTRAST
ADJUSTS RGB GAIN
BRIGHTNESS
ADJUSTS BACKLIGHT
H / V SYNC
SELECT HORIZONTAL OR VERTICAL SYNC
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
35
12. OSD Navigation, CPM2940
AUTO ADJUST
AUTOMATICALLY ADJUSTS IMAGE TO FILL SCREEN
LEFT RIGHT
ADJUSTS IMAGE POSITION TO THE LEFT OR RIGHT
DOWN UP
ADJUSTS IMAGE POSITION UP OR DOWN
HORIZONTAL SIZE ADJUSTS HORIZONTAL SIZE
FINE
ADJUSTS CLOCK FOR FINE HORIZONTAL SIZE
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
36
12. OSD Navigation, CPM2940
OSD LEFT RIGHT
ADJUSTS OSD POSITION TO THE LEFT OR RIGHT
OSD DOWN UP
ADJUSTS OSD POSITION UP OR DOWN
OSD TIMEOUT
ADJUSTS OSD DISPLAY TIME
OSD COLOR
ADJUSTS COLOR OF OSD IMAGE
FACTORY RESET
RECALLS FACTORY ADJUSTMENT DATA
DVI / VGA
INPUT SELECT DVI OR VGA
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
37
12. OSD Navigation, CPM2940
ENGLISH
SELECT OSD FOR ENGLISH LANGUAGE
FRENCH
SELECT OSD FOR FRENCH LANGUAGE
GERMAN
SELECT OSD FOR GERMAN LANGUAGE
ITALIAN
SELECT OSD FOR ITALIAN LANGUAGE
SPANISH
SELECT OSD FOR SPANISH LANGUAGE
JAPANESE
SELECT OSD FOR JAPANESE LANGUAGE
CHINESE TRADITIONAL SELECT OSD FOR CHINESE TRADITIONAL LANGUAGE
CHINESE SIMPLE
SELECT OSD FOR CHINESE SIMPLE LANGUAGE
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
38
12. OSD Navigation, CPM2940
9300
SELECT FOR 9300°K COLOR TEMPERATURE
6500
SELECT FOR 6500°K COLOR TEMPERATURE
5500
SELECT FOR 5500°K COLOR TEMPERATURE
7500
SELECT FOR 7500°K COLOR TEMPERATURE
USER
SELECT FOR USER ADJUST COLOR TEMPERATURE
USER RED
SELECT FOR USER ADJUST RED
USER GREEN
SELECT FOR USER ADJUST GREEN
USER BLUE
SELECT FOR USER ADJUST BLUE
13. Burn-In Mode
When no signal is input to the display unit, it is possible to use on-board image
generator to display alternating full color windows. This is accomplished by
pressing the “MENU” button and “POWER” button at the same time. It is
possible to escape from this mode by reapplying a valid input signal.
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
39
14. A/D Controller Board Pin Description, CPM2940
CONNECTOR DESCRIPTION
PIN COUNT
CN2
24VDC INPUT
6
CN3
TOUCH POWER
3
CN5
GPIO, UART (NOT USED)
6
CN6
VIDEO ITU656, LIGHT SENSOR
5
CN7
LCD LVDS
32
CN8
INVERTER
7
CN9
AUDIO (NOT USED)
8
CN10
DVI-D
24
CN11
VGA
15
CN13
OSD KEY
9
CN14
HDMI
19
CN15
IR RECEIVER
15
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
40
14. A/D Controller Board Pin Description, CPM2940
CN2 24VDC INPUT
PIN
FUNCTION
1
+24 VDC
2
+24 VDC
3
+24 VDC
4
GROUND
5
GROUND
6
GROUND
CN3 TOUCH POWER
PIN
FUNCTION
1
+12VDC
2
+5VDC
3
GROUND
CN5 GPIO, UART (NOT USED)
PIN
FUNCTION
1
+5VDC
2
GROUND
3
DI
4
DO
5
GPIO
6
GPIO
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
41
14. A/D Controller Board Pin Description, CPM2940
CN6 VIDEO ITU656, LIGHT SENSOR
PIN
FUNCTION
1
NC
2
GROUND
3
+3V3
4
DATA0
5
DATA1
CN8 INVERTER
PIN
FUNCTION
1
+5/+12/+24
2
+5/+12/+24
3
+5/+12/+24
4
ADJUST
5
ON/OFF
6
GROUND
7
GROUND
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
42
14. A/D Controller Board Pin Description, CPM2940
CN7 LCD LVDS
PIN
FUNCTION
PIN
FUNCTION
1
PANEL VCC
17
GROUND
2
PANEL VCC
18
GROUND
3
PANEL VCC
19
RXOCKIN-
4
OPTION
20
GROUND
5
OPTION
21
RXO1N3+
6
OPTION
22
RXO1N3-
7
RXE1N3+
23
RXOCKIN+
8
RXE1N3-
24
RXOCKIN-
9
RXECKIN+
25
RXO1N2+
10
RXECKIN-
26
RXO1N2-
11
RXE1N2+
27
RXO1N1+
12
RXE1N2-
28
RXO1N1-
13
RXE1N1+
29
RXO1N0+
14
RXE1N1-
30
RXO1N0-
15
RXE1N0+
31
GROUND
16
RXE1N0-
32
GROUND
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
43
14. A/D Controller Board Pin Description, CPM2940
CN9 AUDIO (NOT USED)
PIN
FUNCTION
1
AMPLIFIER POWER
2
AMPLIFIER POWER
3
AMPLIFIER POWER
4
VOLUME CONTROL
5
MUTE
6
STBY
7
GROUND
8
GROUND
CN10 LCD DVI-D
PIN
FUNCTION
PIN
FUNCTION
1
RX2-_IN
16
HOT PLUG DETECT
2
RX2+_IN
17
RX0-_IN
3
GROUND
18
RX0+_IN
4
NC
19
GROUND
5
NC
20
NC
6
DDC-SCL
21
NC
7
DDC-SDA
22
GROUND
8
NC
23
RXC+_IN
9
RX1-_IN
24
RXC-_IN
10
RX1+_IN
C1
NC
11
GROUND
C2
NC
12
NC
C3
NC
13
NC
C4
NC
14
DVI +5V
C5
GROUND
15
GROUND
C6
GROUND
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
44
14. A/D Controller Board Pin Description, CPM2940
CN12 VGA 15P D-SUB
PIN
FUNCTION
PIN
FUNCTION
1
RED VIDEO
9
+5VDC (DDC)
2
GREEN VIDEO
10
GROUND
3
BLUE VIDEO
11
NC
4
NC
12
DDC-SDA
5
GROUND
13
HORIZONTAL SYNC
6
RED VIDEO GROUND
14
VERTICAL SYNC
7
GREEN VIDEO GROUND
15
DDC-SCL
8
BLUE VIDEO GROUND
CN13 OSD KEY
PIN
FUNCTION
1
POWER
2
GREEN LED
3
RED LED
4
AUTO/SEL
5
DOWN
6
UP
7
MENU
8
RESERVED
9
GROUND
CN15 IR RECEIVER
PIN
FUNCTION
1
+5VDC
2
GROUND
3
+3.3VDC
4
IR DATA
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
45
14. A/D Controller Board Pin Description, CPM2940
CN14 HDMI 19P
PIN
FUNCTION
PIN
FUNCTION
1
TMDS DATA 2+
11
TMDS CLOCK SHIELD
2
TMDS DATA 2 SHIELD
12
TMDS CLOCK—
3
TMDS DATA 2—
13
CEC
4
TMDS DATA 1+
14
NOT CONNECTED
5
TMDS DATA 1 SHIELD
15
DDC CLOCK
6
TMDS DATA 1—
16
DDC DATA
7
TMDS DATA 0+
17
GROUND
8
TMDS DATA 0 SHIELD
18
+5V POWER
9
TMDS DATA 0—
19
HOT PLUG DETECT
10
TMDS CLOCK+
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
46
15. A/D Controller Schematics Power, CPM2940
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
47
16. A/D Controller Schematics Scaler, CPM2940
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
48
17. A/D Controller Schematics Interface, CPM2940
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
49
18. A/D Controller Schematics DSUB DVI INPUT, CPM2940
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
50
19. A/D Controller Schematics KEY BUTTON, IR RECEIVER,
CPM2940
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
51
20. A/D Controller Schematics HDMI, CPM2940
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
52
21. A/D Controller Board
Ceronix Part Number CPM3044
CONNECTOR DESCRIPTION
PIN COUNT
CN2
DC INPUT
6
CN3
TOUCH POWER
3
CN6
AUTO DIM
5
CN7
LCD LVDS
32
CN8
INVERTER CONTROL
7
CN10
DVI INPUT
25
CN11
VGA ANALOG INPUT
15
CN13
OSD KEY PAD
9
CN15
IR BOARD
4
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
53
22. OSD Navigation, CPM3044
CONTRAST
ADJUSTS RGB GAIN
BRIGHTNESS
ADJUSTS BACKLIGHT
H / V SYNC
SELECT HORIZONTAL OR VERTICAL SYNC
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
54
22. OSD Navigation, CPM3044
AUTO ADJUST
AUTOMATICALLY ADJUSTS IMAGE TO FILL SCREEN
LEFT / RIGHT
ADJUSTS IMAGE POSITION TO THE LEFT OR RIGHT
DOWN / UP
ADJUSTS IMAGE POSITION UP OR DOWN
HORIZONTAL SIZE ADJUSTS HORIZONTAL SIZE
FINE
ADJUSTS CLOCK FOR FINE HORIZONTAL SIZE
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
55
22. OSD Navigation, CPM3044
OSD LEFT / RIGHT ADJUSTS OSD POSITION TO THE LEFT OR RIGHT
OSD DOWN / UP
ADJUSTS OSD POSITION UP OR DOWN
OSD TIMEOUT
ADJUSTS OSD DISPLAY TIME
OSD COLOR
ADJUSTS COLOR OF OSD IMAGE
FACTORY RESET
RECALLS FACTORY ADJUSTMENT DATA
VGA / DVI
SELECT VGA OR DVI INPUT
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
56
22. OSD Navigation, CPM3044
ENGLISH
SELECT OSD FOR ENGLISH LANGUAGE
FRENCH
SELECT OSD FOR FRENCH LANGUAGE
GERMAN
SELECT OSD FOR GERMAN LANGUAGE
ITALIAN
SELECT OSD FOR ITALIAN LANGUAGE
SPANISH
SELECT OSD FOR SPANISH LANGUAGE
JAPANESE
SELECT OSD FOR JAPANESE LANGUAGE
CHINESE TRADITIONAL SELECT OSD FOR CHINESE TRADITIONAL LANGUAGE
CHINESE SIMPLE
SELECT OSD FOR CHINESE SIMPLE LANGUAGE
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
57
22. OSD Navigation, CPM3044
9300
SELECT FOR 9300°K COLOR TEMPERATURE
6500
SELECT FOR 6500°K COLOR TEMPERATURE
5500
SELECT FOR 5500°K COLOR TEMPERATURE
7500
SELECT FOR 7500°K COLOR TEMPERATURE
USER
SELECT FOR USER ADJUST COLOR TEMPERATURE
USER RED
SELECT FOR USER ADJUST RED
USER GREEN
SELECT FOR USER ADJUST GREEN
USER BLUE
SELECT FOR USER ADJUST BLUE
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
58
22. OSD Navigation, CPM3044
AUTO DIM
SELECT AUTO DIM ON OR OFF
MINIMUM BACK­
LIGHT LIMIT
SET A MINIMUM BACKLIGHT LIMIT FROM 0 TO 100
23. Burn-In Mode
When no signal is input to the display unit, it is possible to use on-board image
generator to display alternating full color windows. This is accomplished by
pressing the “MENU” button and “POWER” button at the same time. It is
possible to escape from this mode by reapplying a valid input signal.
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
59
24. A/D Controller Board Pin Description, CPM3044
CONNECTOR DESCRIPTION
PIN COUNT
CN2
24VDC INPUT
6
CN3
TOUCH POWER
3
CN6
VIDEO ITU656, LIGHT SENSOR
5
CN7
LCD LVDS
32
CN8
INVERTER
7
CN10
DVI-D
24
CN11
VGA
15
CN13
OSD KEY
9
CN14
HDMI
19
CN15
IR RECEIVER
15
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
60
24. A/D Controller Board Pin Description, CPM3044
CN2 24VDC INPUT
PIN
FUNCTION
1
+24 VDC
2
+24 VDC
3
+24 VDC
4
GROUND
5
GROUND
6
GROUND
CN3 TOUCH POWER
PIN
FUNCTION
1
+12VDC
2
+5VDC
3
GROUND
CN6 VIDEO ITU656, LIGHT SENSOR
PIN
FUNCTION
1
NC
2
GROUND
3
+3V3
4
DATA0
5
DATA1
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
61
24. A/D Controller Board Pin Description, CPM3044
CN8 INVERTER
PIN
FUNCTION
1
+5/+12/+24
2
+5/+12/+24
3
+5/+12/+24
4
ADJUST
5
ON/OFF
6
GROUND
7
GROUND
CN7 LCD LVDS
PIN
FUNCTION
PIN
FUNCTION
1
PANEL VCC
17
GROUND
2
PANEL VCC
18
GROUND
3
PANEL VCC
19
RXOCKIN-
4
OPTION
20
GROUND
5
OPTION
21
RXO1N3+
6
OPTION
22
RXO1N3-
7
RXE1N3+
23
RXOCKIN+
8
RXE1N3-
24
RXOCKIN-
9
RXECKIN+
25
RXO1N2+
10
RXECKIN-
26
RXO1N2-
11
RXE1N2+
27
RXO1N1+
12
RXE1N2-
28
RXO1N1-
13
RXE1N1+
29
RXO1N0+
14
RXE1N1-
30
RXO1N0-
15
RXE1N0+
31
GROUND
16
RXE1N0-
32
GROUND
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
62
24. A/D Controller Board Pin Description, CPM3044
CN10 LCD DVI-D
PIN
FUNCTION
PIN
FUNCTION
1
RX2-_IN
16
HOT PLUG DETECT
2
RX2+_IN
17
RX0-_IN
3
GROUND
18
RX0+_IN
4
NC
19
GROUND
5
NC
20
NC
6
DDC-SCL
21
NC
7
DDC-SDA
22
GROUND
8
NC
23
RXC+_IN
9
RX1-_IN
24
RXC-_IN
10
RX1+_IN
C1
NC
11
GROUND
C2
NC
12
NC
C3
NC
13
NC
C4
NC
14
DVI +5V
C5
GROUND
15
GROUND
C6
GROUND
FUNCTION
CN12 VGA 15P D-SUB
PIN
FUNCTION
PIN
1
RED VIDEO
9
+5VDC (DDC)
2
GREEN VIDEO
10
GROUND
3
BLUE VIDEO
11
NC
4
NC
12
DDC-SDA
5
GROUND
13
HORIZONTAL SYNC
6
RED VIDEO GROUND
14
VERTICAL SYNC
7
GREEN VIDEO GROUND
15
DDC-SCL
8
BLUE VIDEO GROUND
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
63
24. A/D Controller Board Pin Description, CPM3044
CN13 OSD KEY
PIN
FUNCTION
1
POWER
2
GREEN LED
3
RED LED
4
AUTO/SEL
5
DOWN
6
UP
7
MENU
8
RESERVED
9
GROUND
CN15 IR RECEIVER
PIN
FUNCTION
1
+5VDC
2
GROUND
3
+3.3VDC
4
IR DATA
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
64
24. A/D Controller Board Pin Description, CPM3044
CN14 HDMI 19P
PIN
FUNCTION
PIN
FUNCTION
1
TMDS DATA 2+
11
TMDS CLOCK SHIELD
2
TMDS DATA 2 SHIELD
12
TMDS CLOCK-
3
TMDS DATA 2-
13
CEC
4
TMDS DATA 1+
14
NOT CONNECTED
5
TMDS DATA 1 SHIELD
15
DDC CLOCK
6
TMDS DATA 1-
16
DDC DATA
7
TMDS DATA 0+
17
GROUND
8
TMDS DATA 0 SHIELD
18
+5V POWER
9
TMDS DATA 0-
19
HOT PLUG DETECT
10
TMDS CLOCK+
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
65
25. A/D Controller Schematics Power, CPM3044
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
66
26. A/D Controller Schematics Scaler, CPM3044
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
67
27. A/D Controller Schematics Interface, CPM3044
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
68
28. A/D Controller Schematics DSUB DVI INPUT, CPM3044
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
69
29. A/D Controller Schematics KEY BUTTON, IR RECEIVER,
CPM3044
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
70
30. A/D Controller Schematics HDMI, CPM3044
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
71
31. A/C TO DC POWER SUPPLY
CERONIX PART NUMBER CPM2201A
INPUT: 100-240VAC, 50-60Hz, 1.3A
OUTPUT: 24VDC, 2.5A
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
72
31. A/C TO DC POWER SUPPLY
CERONIX PART NUMBER CPM2201A SCHEMATIC
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
73
32. A/C TO DC POWER SUPPLY
CERONIX PART NUMBER CPM2405
INPUT: 100-240VAC, 50-60Hz, 1.3A
OUTPUT: 24VDC, 350W
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
74
32. A/C TO DC POWER SUPPLY
CERONIX PART NUMBER CPM2201A SCHEMATIC
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
75
33. 24V 2-LAMP INVERTER
CERONIX PART NUMBER CPM2236A
INPUT: 24VDC, .45A
OUTPUT: CCFL LAMP CURRENT RANGE 3.5-8.0mA @ 50kHz
CN1 DC SUPPLY AND CONTROL
PIN
FUNCTION
1
+24VDC
2
+24VDC
3
GROUND
4
GROUND
5
BRIGHT ADJUST
6
GROUND
7
ON/OFF CONTROL
CN2, CN3 CCFL LAMP CONNECTION
PIN
FUNCTION
1
CCFL HIGH VOLTAGE
2
CCFL RETURN
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
76
33. 24V 2-LAMP INVERTER SCHEMATIC
CERONIX PART NUMBER CPM2236A
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
77
34. 24V 4-LAMP INVERTER
CERONIX PART NUMBER CPM2253A
INPUT: 24VDC, 1.2A
OUTPUT: CCFL LAMP CURRENT RANGE 3.0-7.0mA @ 50kHz
CN1 DC SUPPLY AND CONTROL
PIN
FUNCTION
1
+24VDC
2
+24VDC
3
GROUND
4
GROUND
5
BRIGHT ADJUST
6
GROUND
7
ON/OFF CONTROL
J2, J3, J4, J5 CCFL LAMP CONNECTION
PIN
FUNCTION
1
CCFL HIGH VOLTAGE
2
CCFL RETURN
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
78
34. 24V 4-LAMP INVERTER SCHEMATIC
CERONIX PART NUMBER CPM2253A
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
79
35. 24V 6-LAMP INVERTER
CERONIX PART NUMBER CPM2469A
INPUT: 24VDC, 1.66A
OUTPUT: CCFL LAMP CURRENT RANGE 3.8-6.6mA @ 47kHz
CN1 DC SUPPLY AND CONTROL
PIN
FUNCTION
1
+24VDC
2
+24VDC
3
ON/OFF CONTROL
4
BRIGHT ADJUST
5
GROUND
6
GROUND
CN2, CN3, CN4, CN6, CN7, CN8 CCFL LAMP CONNECTION
PIN
FUNCTION
1
CCFL HIGH VOLTAGE
2
CCFL RETURN
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
80
35. 24V 6-LAMP INVERTER SCHEMATIC
CERONIX PART NUMBER CPM2469
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
81
36. 12V 4-LAMP INVERTER
CERONIX PART NUMBER CPM2237A
INPUT: 12VDC, 2.4A
OUTPUT: CCFL LAMP CURRENT RANGE 3.0-6.5mA @ 50kHz
J6
DC SUPPLY AND CONTROL
J7
PIN
FUNCTION
PIN
1
+12VDC
10, 11, 12
2, 4
GROUND
1, 3, 5, 6, 8, 9
3
BRIGHT ADJUST
2
5
ON/OFF CONTROL
4
NC
7
J2, J3, J4, J5 CCFL LAMP CONNECTION
PIN
FUNCTION
1
CCFL HIGH VOLTAGE
2
CCFL RETURN
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
82
36. 12V 4-LAMP INVERTER SCHEMATIC
CERONIX PART NUMBER CPM2237A
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
83
37. 12V 2-LAMP INVERTER
CERONIX PART NUMBER CPM2772
INPUT: 12VDC, 2.4A
OUTPUT: CCFL LAMP CURRENT RANGE 2.0-8.5mA @ 40k-80kHz
CN1
DC SUPPLY AND CONTROL
CN6
PIN
FUNCTION
PIN
1
+12VDC
10, 11, 12
2, 4
GROUND
1, 3, 5, 6, 8, 9
3
BRIGHT ADJUST
2
5
ON/OFF CONTROL
4
NC
7
CN2, CN3, CN4, CN5 CCFL LAMP CONNECTION
PIN
FUNCTION
1
CCFL HIGH VOLTAGE
2
CCFL RETURN
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
84
37. 12V 2-LAMP INVERTER SCHEMATIC
CERONIX PART NUMBER CPM2772
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
85
38. 24V 23” LED DRIVER
CERONIX PART NUMBER CPM3007
INPUT: 24VDC, 2.4A
OUTPUT: LED CHANNEL CURRENT RANGE 20-180mA @ 52.7kHz
J1
J1
DC SUPPLY AND CONTROL
PIN
FUNCTION
1,2
+24VDC
3, 4
GROUND
5
BRIGHT ADJUST
6
GROUND
7
ON/OFF CONTROL
LED CONNECTION
PIN
FUNCTION
1
CHANNEL 4
2
CHANNEL 3
3
VOLTAGE OUT
4
VOLTAGE OUT
5
CHANNEL 2
6
CHANNEL 1
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
86
38. 24V 23” LED DRIVER SCHEMATIC
CERONIX PART NUMBER CPM3007
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
87
39. 24V 21.5”-22” LED DRIVER
CERONIX PART NUMBER CPM3057
INPUT: 24VDC, 2.4A
OUTPUT: LED CHANNEL CURRENT RANGE 20-180mA @ 52.7kHz
J1
J1
DC SUPPLY AND CONTROL
PIN
FUNCTION
1,2
+24VDC
3, 4
GROUND
5
BRIGHT ADJUST
6
GROUND
7
ON/OFF CONTROL
LED CONNECTION
PIN
FUNCTION
1
CHANNEL 4
2
CHANNEL 3
3
VOLTAGE OUT
4
VOLTAGE OUT
5
CHANNEL 2
6
CHANNEL 1
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
88
39. 24V 21.5”-22” LED DRIVER SCHEMATIC
CERONIX PART NUMBER CPM3057
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
89
40. LCD Label with Identification Code
ITEM
DESCRIPTION
MODEL
INDICATES MONITOR SIZE AND MODEL
DATE
INDICATES THE DATE THE MONITOR WAS MANUFACTURED
S/N
INDICATES THE SERIAL NUMBER
CODE
TECHNICAL CODE FOR EASE OF IDENTIFICATION
~100-240V
INPUT VOLTAGE
50-60 Hz
INPUT FREQUENCY
1.5A
MAXIMUM CURRENT DRAW
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
90
41. LCD Identification Code
AD Board Code
CPM2281A
1
CPM2376V1
2
CPM2376V2
3
CPM2940
4
CPM3044
5
LCD Size
8.4"
12.1"
15"
15"
15"
15"
15"
17"
17"
19"
19"
19"
19"
19"
19"
19"
20"
20"
20"
20"
20"
20.1"
20.1"
21.5"
21.5"
21.5"
22"
22"
22"
22"
22"
22"
Checksum Code
1AC - C7AC
1AD - 8A74
1D - 6E13
1E - 6E13
1T - 16DC
1U - 16DC
1Y - 4D69
1A - 46DF
1AH - DE3F
1A - 46DF
1AA - 5F9C
1AB - 068F
1AF - C629
1AL - 72D9
1AO - FD64
1C - 46DF
1F - E7E0
1F - E7E0
1F - E7E0
1AG - 462A
1AJ - 8771
1S - CC54
1AE - 8C05
1V - B8BA
1W - B8BA
1X - 8EE3
1B - DBDF
1J - 111F
1J - 111F
1J - 111F
1J - 111F
1J - 111F
EDID
84_90; N/A
12_79; N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
19_75; 19_00
19W_B4; 19W_2A
N/A
N/A
20_A4; 20_74
20_9B; 20_23
20_AC; 20_7C
20_45; 20_17
20_AC; 20_7C
201_1F; 201_A7
201_1F; 201_A7
215_BC; 215_18
215_BC; 215_18
215_BC; 215_18
22_26; 22_9B
22_C0; 22_4B
22_C9; 22_90
22_60; 22_28
22_D1; 22_98
22_7B; 22_42
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
Code
0A
0B
0C
0D
0E
0F
0G
0H
0I
0J
0K
0L
0M
0N
0O
0P
0Q
0R
0S
0T
0U
0V
0W
0X
0Y
0Z
1A
1B
1C
1D
1E
1F
Size
22"
22"
22"
22"
22"
22"
22"
22"
22"
22"
22"
22"
22"
23"
23"
26"
32"
32"
32"
40"
40"
46"
46"
46"
46"
23"
32"
20"
22"
21.5”
22”
22”
22”
Cksm Code
1J - 111F
1J - 111F
1AI - 7500
1AK - 06D1
1AM - B275
1AM - B275
1AM - B275
1AM - B275
1AM - B275
1AM - B275
1AM - B275
1AM - B275
1AN - FB78
1H - 0C4F
1I - 0C4F
1G - 85CE
1K - 7DF7
1L - 8EE7
1L - 8EE7
1M - A540
1N - 1C3C
1O - 2C94
1P - 07E6
1Q - F007
1R - 5890
1AP - AD42
1AQ - DF9A
1AR - 1456
2J - 43DF
1AS-7DEE
1J-111F
1AM-B275
1AT-6FA1
EDID
22_45; 22_15
22_31; 22_A1
22_84; 22_F4
22_45; 22_15
22_C0; 22_4B
22_D1; 22_98
22_90; 22_57
22_7B; 22_42
22_45; 22_15
22_26; 22_9B
22_31; 22_A1
22_84; 22_F4
22_45; 22_15
23_2B; 23:FA
23_64; 23_3A
26_B0; 26_85
32_85; 32_58
32_85; 32_58
32_A9; 32_7F
40_48; 40_BE
40_48; 40_BE
46_F5; 46_CA
46_2F; 46_2F
46_91; 46_67
46_91; 46_67
23_6D; 23_DD
32_C8; 32_BA
20_84; 20_54
22_45; 22_15
215_BC; 215_18
22_F5; 22_5D
22_F5; 22_5D
22_F5; 22_5D
Code
1G
1H
1I
1J
1K
1L
1M
1N
1O
1P
1Q
1R
1S
1T
1U
1V
1W
1X
1Y
1Z
2A
2B
2C
2D
2E
2F
2G
2H
2I
2J
2K
2L
2M
91
41. LCD Identification Code
Panel Size
8.4"
12"
15"
15"
15"
15"
15"
15"
17"
17"
17"
17"
19"
19"
19"
19"
19"
19"
19"
19"
19"
20"
20"
20.1"
20.1"
20.1"
20.1"
21.5"
21.5"
21.5"
21.5"
22"
22"
22"
22"
Panel Number
CPP1749
CPP1750
CPP1703
CPP1705
CPP1735
CPP1741
CPP1743
CPP1764
CPP1700
CPP1751
CPP1761
CPP1777
CPP1701
CPP1714
CPP1717
CPP1748
CPP1762
CPP1762-WMS
CPP1763
CPP1768
CPP1775
CPP1726
CPP1769
CPP1728
CPP1729
CPP1776
CPP1778
CPP1737
CPP1746
CPP1760
CPP1782
CPP1710
CPP1730
CPP1740
CPP1740-3 REEL
Code
0A
0B
0C
0D
0E
0F
0G
0H
0I
0J
0K
0L
0M
0N
0O
0P
0Q
0R
0S
0T
0U
0V
0W
0X
0Y
0Z
1A
1B
1C
1D
1E
1F
1G
1H
1I
Size
22"
22"
23"
23"
26"
32"
32"
32"
32"
40"
40"
46"
46"
46"
46"
Panel Number
CPP1740-5 REEL
CPP1772
CPP1747
CPP1771
CPP1727
CPP1724
CPP1759
CPP1765
CPP1780
CPP1707
CPP1736
CPP1713
CPP1731
CPP1739
CPP1758
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
Code
1J
1K
1L
1M
1N
1O
1P
1Q
1R
1S
1T
1U
1V
1W
1X
Inverter or LED Driver
CPM2236
CPM2236A
CPM2237
CPM2237A
CPM2253
CPM2253A
CPM2469
CPM2469A
CPM2772
CPM2815
CPM3003
CPM3007
CPM3057
BUILT-IN INVERTER
BUILT-IN LED DRIVER
CPM2761
Code
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
92
41. LCD Identification Code
CRT Replacement Frame Revision
No CRT Frame or Brackets
Brackets
Revision A
Revision B
Revision C
Revision D
Revision E
Revision F
Revision G
Revision H
Revision I
Code
A
B
C
D
E
F
G
H
I
J
K
Touch Controller
Glass
No Controller Provided
CPM2115
CPM2115B
CPM2359
CPM2359A
CPM2417
CPM2484
CPM2484A
CPM2484B
DST SERIAL
DST USB
CERONIX LCD MONITOR SPECIFICATION AND SERVICE MANUAL
Code
A
B
C
D
E
F
G
H
I
J
K
L
Touch Screen Manufacturer Code
No Touch or Glass
0
Glass
1
3M
2
TPK/Optera
3
Digitech
4
93

Similar documents

rarities, classics, odds and ends from our cellars

rarities, classics, odds and ends from our cellars 6 Bollinger La Grande Année Rosé, vintage 2004 (Gift Box) 14 Laurent Perrier Rosé

More information

PDF File - My Slot Notes

PDF File - My Slot Notes Replaced 145 ( PRA H Vert Control / part # CPR0503) Tested Ok Replaced 228 ( 1N5954B 160v Z-Diode / part # CPD 1256) Tested OK Replaced 145 (PRA H Vert Control / part # CPR 0503) & 98 ( 10 uF @ 25 ...

More information