Каталог продукции Aermec 2012

Transcription

Hystory
The company
Giordano Riello, founder and chairman of Aermec, assisted by his son
Alessandro and daughter Raffaella, has solidly associated the Company
name with precise values:
Respect for the environment by using new eco-friendly refrigerants as
well as innovative installations using water as the carrier fluid.
Noise pollution control with low-noise emission products, which
undergo scrupulous testing before being put on the market.
Energy saving, the great challenge of the Third Millennium, with the
development of combined heating and air conditioning systems where
appliances are used only as and when necessary.
Health care special filters trap the smallest particles in suspension and
the Plasmacluster system cleans the air of dust mites and moulds, making
for a cleaner, healthier environment and with the new germicidal lamps
eliminating all virus and batteries.
1961 Giordano Riello sets up Riello Condizionatori, initially producing for
contractors only. The story begins.
1963 The Aermec brand is born and marks all future company products designed
and manufactured on site.
The brand name gains a stronghold as a major product name in Italy and
throughout Europe.
1970 Aermec can already supply fresh and warm air. Aermec presents the
first dual section conditioner: the first “split-system”. Fancoil production
starts.
1980 The Eighties sees the development of water chillers and air handling units.
1990 The Nineties mark the definitive consolidation of the company on the market.
The Aermec brand is associated with advanced technology and high quality
design.
1998 The name makes the company. From 1 January Aermec becomes the
company name as well as product brand.
2000 The company consolidated its leadership in the production of fancoils, and
laid the technological and production basis for strong growth in the field of
high powered air-conditioning systems.
2002 Design and technology: Aermec launched Omnia a new generation of
fancoils, designed for domestic applications. OMNIA is the result of co
operation with a worldwide prestigious designer.
2004 The international market ask for number and Aermec answer. Giordano Riello
make the producing system more technogical. High producing, quality and
assistance: the success of Aermec is going to continue.
2006 Aermec consolidated its presence in world markets with system appliances. A
series of models to meet all design engineering requirements.
2008 Aermec responds with more and more efficient units to the world challenge
of energy saving with a special attention for our environment.
2010 Aermec extends the use of inverter technology on its fancoils and chillers.
The perfect integration of the new inverter technology with the most
sophisticated control systems is best expressed in the VMF (Variable Multi
Flow) Hydronic System - anew way to interpret comfort in the home and
elsewhere.
2011 Aermec turns 50. The company has developed and enlarged, always willing
to understand and anticipate the needs of the market with innovative and
quality products.
Quality in innovation, in products, in pre-sales and after-sales services.
Promotion of the philosophy of “integrated design” between designer and
architect.
Past success represents the commitment to the future.
1 Air handling units for systems
fan coils
FCX.................................................................................................................................... 12
Universal and vertical installations
FCXI................................................................................................................................... 16
Fan coils with Inverter brushless motor Continuous 0-100% air flow rate regulation
Universal, floor and ducted installation
FCX P................................................................................................................................. 20
Ductable installations
VEC.................................................................................................................................... 24
Installation in suspended ceilings
Omnia HL.......................................................................................................................... 26
Universal installations for residential applications
Omnia UL.......................................................................................................................... 28
Ventilcassaforma................................................................................................................ 30
Template for recessed installation of fancoils in the wall
FCW................................................................................................................................... 32
Wall installation
FCW................................................................................................................................... 34
Wall installation
FCL..................................................................................................................................... 36
False ceiling installation and cooling power from 1900 to 11000W
FCLI................................................................................................................................... 40
False ceiling installation and cooling power from 1900 to 4980W
FHX.................................................................................................................................... 44
With germicidal lamp
Control panels.................................................................................................................... 48
Variable Multi Flow Sistems............................................................................................... 50
Thermoconvectors
Climafon............................................................................................................................ 54
Vertical installation residential use
CLIMABOX........................................................................................................................ 56
Recessed wall-mounted convection heater
air conditioning units
VED.................................................................................................................................... 58
Air handling terminal with cooling capacities from 8 to 18 kW
TS....................................................................................................................................... 62
Air treatment unit with power from 4.85 to 24.8 kW
TDA................................................................................................................................... 64
Air flow rate from 800 to 3,500 cu.m/h
TA...................................................................................................................................... 66
Conditioning unit cooling efficiency with 4 row battery from 4.5 to 32 kW
5.5 a 40 kW 6 row coil
heating efficiency with 4 row battery from 14.0 to 78.0 kW
15.5 a 87.5 kW 6 row coil
TUN................................................................................................................................... 70
Ductable air-conditioning unit
T (standard)................................................................................................ 74
Air handling unit with capacities from 15.6 to 137.8 kW
T........................................................................................................................................ 76
Air handling unit with capacities from 8.8 to 137.8 kW
heating recovery unit
UR...................................................................................................................................... 80
Heating recovery unit
HRS.................................................................................................................................... 84
Heat recovery unit
UR CF................................................................................................................................ 88
Heat recovery unit with cooling circuit
Lüftungszentralen
NCS.................................................................................................................................... 90
NCT H................................................................................................................................ 92
NCD................................................................................................................................... 94
units for systems
air-cooled chilleRS, heat pumps and motocondensing units
ANL.................................................................................................................................... 98
Air-cooled water chillers, heat pumps and condensing units with axial fans
ANLI................................................................................................................................ 102
Heat pump, air cooled units with axial fans
ANF.................................................................................................................................. 106
Heat pump, air cooled units with axial fans
ANR................................................................................................................................. 110
Air cooled heat pump units with axial flow fans from 11,90 up to 21,49 kW
ANK................................................................................................................................. 114
Air cooled heat pump units with axial flow fans from 6,82 up to 17,85 kW
HE.................................................................................................................................... 118
Air cooled heat pump chillers from 6,7 up to 47,5 kW
HBI.................................................................................................................................. 122
Air-Water split heat pump for heating, Cooling and production of DHW Inverter DC
CL.................................................................................................................................... 126
Air cooled chiller and heat pump with plug fan
Capacities from 5.5 to 39.3 kW
SRA.................................................................................................................................. 130
Heat pumps with axial flow fans from 11,90 up to 21,49 kW
SWP................................................................................................................................. 134
High temperature AIR/WATER heat pumps for production of domestic hot water.
SRP................................................................................................................................... 136
High Temperature AIR/WATER Heat Pump only with “PLUG FAN”
NRL 280-700.................................................................................................................... 140
Air cooled chillers - Cooling only - Cooling capacity from 53 up to 150 kW
NRL-H 280-700................................................................................................................ 144
Air cooled heat pumps units - Heating capacity from 58 kW up to 171 kW
NRL 750-1800.................................................................................................................. 148
Air cooled chillers - Cooling only - Cooling capacity from 174 kW up to 469 kW
NRL-H 750-1800.............................................................................................................. 152
Air cooled heat pumps - Heating capacity from 165 up to 523 kW
NRL 2000-3600................................................................................................................ 156
Air cooled chiller - Cooling only - Cooling capacity from 500 kW up to 938 kW
NRL-H 2000-3600............................................................................................................ 160
Air cooled heat pumps - Heating capacity from 462 up to 944 kW
NRP 200-750................................................................................................................... 164
Luftgekühlte Mehrzweckeinheiten mit Axiallüftern
NRP 800-1800................................................................................................................. 168
Luftgekühlte Mehrzweckeinheiten mit Axiallüftern
NRL Free Cooling 280-700............................................................................... 172
NRL Free-Cooling 750-1800............................................................................. 176
NRL Free-Cooling 2000-3600........................................................................... 180
NRC................................................................................................................................. 184
With radial fans and capacities from 46 up to 264 kW
NS.................................................................................................................................... 188
With axial fans and power ratings from 238 up to 1600 kW with two-screw compressor
NSH................................................................................................................................. 196
Cooling capacity from 236 up to 732 kW, heating capacity from 275 up to 812
NS Free-Cooling........................................................................................................... 204
Air cooled chillers with axial fans and cooling ratings from 272 up to 1555 kW
Cooling output in Free-cooling mode from 280 up to 1510 kW with screw compressors
NS Glycol Free............................................................................................................. 208
Air cooled chillers with axial fans and screw compressors
Cooling capacity from 272 to 1554 kW
Free-cooling capacity from 213 to 1149 kW
TBX.................................................................................................................................. 212
Air cooled chillers with two-stage centrifugal compressor and axial fans
Independent system
IDROBLOC...................................................................................................................... 216
With capacity from 3.5 up to 6.7 kW
IDROBLOC C................................................................................................................... 218
2 units for systems
Water-cooled chillers, heat pumps and motoevaporating units
Venice.............................................................................................................................. 220
Water cooled reversible with capacities from 5.3 up to 9.7 kW
WRL 025-160................................................................................................................... 222
Water-cooled chillers Cooling capacity from 6.6 to 43.7 kW
WRL 180-650................................................................................................................... 226
Reversible water-cooled chillers for the production of hot water up to 55 °C
Cooling capacity from 50 to 168 kW - Heating capacity from 53 to 187 kW
WRL-H 025-160............................................................................................................... 230
Water cooled reversible heat pumps for the production of hot water up to 60 °C
Cooling capacity from 6 up to 40 kW - Heating capacity from 8 up to 48 kW
WRL-H 180-650............................................................................................................... 234
Water cooled reversible heat pumps for the production of hot water up to 55 °C
Cooling capacity from 45 to 157 kW - Heating capacity from 53 to 183 kW
VXT.................................................................................................................................. 238
GEOTHERMAL water/water reversible heat pump Heating, cooling
and domestic hot water
NXW................................................................................................................................ 242
Water cooled heat pump units with scroll compressors
from 106 up to 419 kW
WSA................................................................................................................................. 250
With cooling capacity from 179 up to 715 kW
WSB................................................................................................................................. 254
With cooling capacity from 172 up to 704 kW
With heating capacity from 184 up to 741 kW
WSH................................................................................................................................ 258
WATER cooled heat pump reverse cycle with two-screw compressor
TW110............................................................................................................................. 262
Water cooled modular chiller with centrifugal compressor with R134a
WF................................................................................................................................... 264
WATER/WATER chillers - Cooling capacity from 616 up to 1492 kW
Heating capacity from 634 up to 1535 kW
HWF................................................................................................................................ 268
WATER/WATER chillers with twin screw compressor from 630 up to 1609 kW
.
.
.
.
.
.
.
.
.
.
.
.
.
ROOFTOP
RTE 025-200.................................................................................................................... 272
Cooling capacity from 10 up to 52 kW
RTE 240-400.................................................................................................................... 276
RTE 480-800.................................................................................................................... 280
.
.
.
water-cooled packaged air conditioners
MEC-W............................................................................................................................ 284
components for air conditioning systems
SAP.................................................................................................................................. 286
Storage tank with capacity from 75 up to 3500 l
TRA.................................................................................................................................. 290
Cooling towers with capacities from 49.53 up to 1084.88 kW
Remote condensers.................................................................................................. 292
Remote condensers
DRY COOLERS................................................................................................................ 300
Dry coolers
DMP................................................................................................................................. 308
Recessed dehumidifier for floor systems
.
.
.
.
.
.
.
Accessories
FCX
Fan coils
Universal and floor installation
White:
housing: RAL 9002
head and feet: RAL 7044
• AMP: kit for the wall mounting installation of
versions FCX U and UE.
• BC: Auxiliary condensate drip tray. Use the
BC 5-6 tray accessory if horizontal, or BC 4 if
vertical.
• BV: Single row hot water coil. Not available
for 4-row versions or those with
Plasmacluster.
• DSC4: Condensate drainage device for use when
natural run-off is not possible.
• PC: Sheet metal panel to close rear of unit.
• RX: Armoured electric coil with safety thermostat. (Requires a thermostat with heater management). Not available for 4-row versions or
those with Plasmacluster.
• SE: Manually operated fresh air intake louver.
• SIT 3 - 5: Thermostat Interface Cards. They
allow the creation of a network of fan coils
(max. 10) commanded by a central control
Accessories
FCX APC
AMP*
AMP20
BC
ZX
Aermec
participate in the EUROVENT
program: FC / 2 / H, FC / 4 / H
the products are present on the site
www .eurovent-certification. com
Plasmacluster
BV**
FCX-U
PLASMACLUSTER ioniser filter
Plasmacluster reduces pollutants by decomposing their molecules.
By means of electrical discharges, "Plasmacluster" provokes the fission of the water molecules in the air, into positive and negative ions. These ions
neutralise the molecules of the gas pollutants, thereby creating products that are normally found in the air anyway.
The result is in the air: at last you'll be able to breathe clean, ionised air free of any bad smells.
Features
• Available in 14 sizes and 8 versions:
- Vertical installation:
FCX-A: vertical free-standing with switch
FCX-AS: vertical free-standing without switch.
Compatible with the VMF system
FCX-ACT: vertical free standing with electronic thermostat
FCX-APC: (FCX 22, 24, 32, 34, 42, 44, 50, 54,
62, 64, 82, 84) vertical free-standing with electronic thermostat and Plasmacluster purifier
FCX-B: front suction, without selector.
- Vertical and horizontal installation:
FCX-U: universal floor or wall/ceiling
mounting. Adjustable air distribution grille,
except for models 62, 64, 82, 84 and 102.
FCX-UA: universal floor or wall/ceiling
mounting. Grille with fixed fins. Compatible
with the VMF system
FCX-UE: universal floor or wall/ceiling mounting
with direct expansion coil. Adjustable air distribution grille, except for models 62, 82 and 102.
• Automatic fan coil switch-off with closure of
the air distribution grille
• Broad range of controls
• Metallic protective cabinet with rustproofing
polyester paint
• Quiet operation
• Low loss of charge in the heat exchange batteries
• Versions with 3-row coil (FCX 17, 22, 32, 42, • Electric motors with permanently inserted
condensers
50, 62, 82 and 102)
• Versions with 4-row coil (FCX 24, 34, 44, 54, • Ease of installation and maintenance
• Air filter easy to remove and clean
64, and 84)
• Extractable shrouds for easy, effective cleaning
• EUROVENT Certification
• Water connections can be reversed during
• 3-speed ventilating unit
installation phase
• Full compliance with the accident prevention
standards
• Rounded line
Electronic thermostat (FCX-ACT)
Automatic switch on / switch off
Possibility of automatic fan speed change, to
ensure the gradual modulation of the power
output.
Quiet operation
Thanks to a supply water temperature check, the
panel automatically positions itself in winter or
summer operation, automatically changing the
temperature scale in the thermostat as well.
Other functions:
AUTOTEST function, winter anti-freeze
check
PC
PTI
PX
PX2•PX2C6****
PXBI
PXAE
PXAI
PXAR
RX**
SE
Automatic fan speed change
Thanks to the supply water temperature
check, the microprocessor automatically
switches the fan and any valve on or off (in
standby) in both summer and winter.
The absence of any electromechanical drives
eliminates that typical ticking noise
produced in certain conditions when the
relays are triggered. This, together with
extremely silent ventilation, means that
Aermec fan coils guarantee excellent sound
comfort as there are no sudden peaks of
noise, even at low levels.
DSC4*
FMT10
FMT20AW
KTLM
Automatic season changeover
SIT
SW3
SWA
TF1
VCF ******
VCFD
WMT05
WMT10
ZX
4******
5
6
117
122
132
142
162
17
18
22
23
32
33
42
43
62
17
22
32
42
52
62
15X
20X
30X
40X
80X
3
5
17
22
24
32
34
FCX Fan Coil
Size
42
44
50
54
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
62
64
82
84
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔****
✔****
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔****
✔****
✔****
✔
✔
✔
✔
✔
✔****
✔
✔
✔
✔
✔
✔
✔
✔
✔****
✔
✔
✔
✔
✔
✔
✔
✔
✔****
✔
✔
✔
* = The DSC4 accessory is not compatible with the installation brackets AMP. The DSC4
accessory is compatible with the installation brackets AMP20.
** = The accessory is not available for models fitted with a Plasmacluster filter.
*** = 24 Volt.
12
✔
✔
✔
✔
lation consent, if connected to the connector
(W) of the FMT20AW panel. Two SWA probes
can be connected to the panel FMT20AW
simultaneously.
• VCF: the kit contains a motorised 3-way valve
with insulating shell, plus coupling and pipes in
insulated copper. For 3/4-row and 1-row coils
(BV). Combine the SW3 probe with FCX ACT,
too. Versions with 230V and 24V~50Hz power
supply.
• VCFD: Kit consisting of powered 2-way valve,
copper couplings and pipes. For 3/4-row and
1-row coils (BV). Combine the SW3 probe
with FCX ACT, too. Versions with 230V and
24V~50Hz power supply.
• ZX: Feet for floor-standing installations for
A-AS-ACT-APC models.
• Control panels and VMF System: the characteristics are described on the appropriate card.
✔
41-4124***
42-4224***
43-4324***
44-4424*** ✔**** ✔****
45-4524***
✔
✔
1-124***
2-224***
3-324***
✔**** ✔****
4-424***
5
6
panel (selector or thermostat).
SIT3: commands the 3 fan speeds and must
be installed on each fan coil of the network;
receives the commands from the selector or
the SIT5 card.
SIT5: commands the 3 fan speeds and up to 2
valves (four pipes systems); sends the commands of the thermostat to the fan coils network.
• SW3: water temperature probe that gives the
automatic season change feature to electronic
thermostats supplied with water-side change
over.
• SWA: SWA external probe accessory (length L
= 6m). The probe detects the temperature of
the ambient air if connected to the connector
(A) of the panel FMT20AW; the ambient air
temperature probe incorporated in the panel
is automatically deactivated. Detects the temperature of the water in the system, for venti-
✔
✔
✔
✔
✔
✔****
✔
✔
✔
✔
✔
✔
✔
✔****
✔
✔
✔
✔
✔
✔
✔
✔
102
Versions
U-UA-UE
U-UA-UE
A-AS-ACT-APC-B-U-UA-UE
U-UA-UE
✔ U-UA-UE
A-AS-B-U-UA
A-AS-B-U-UA
A-AS-B-U-UA
A-AS-B-U-UA
✔ A-AS-B-U-UA
✔ A-AS-ACT-APC-B-U-UA-UE
✔ AS-B-U-UA
✔ AS-B-U-UA
✔ AS-B-U-UA
A-AS-ACT-APC-B-UA
U-UE
A-AS-ACT-APC-B-UA
U-UE
A-AS-ACT-APC-B-UA
U-UE
A-AS-ACT-APC-B-UA
U-UE
✔ A-AS-ACT-B-U-UA-UE
✔ AS-B-UA-U(62 - 102)
✔ AS-B-U-UA
✔ AS-B-U-UA
✔ AS-B-U-UA
✔ AS-B-U-UA
✔ AS-B-U-UA
✔ AS-B-U-UA
A-AS-B-U-UA
A-AS-B-U-UA-UE
A-AS-B-U-UA-UE
A-AS-B-U-UA-UE
A-AS-B-U-UA-UE
✔ A-AS-B-U-UA-UE
A-AS-ACT-APC
A-AS-ACT-APC
A-AS-ACT-APC
A-AS-ACT-APC
✔ A-AS-ACT-APC
✔ AS-B-U-UA-UE
✔ AS-B-U-UA-UE
✔ AS-B-U-UA
✔ AS-B-U-UA
✔ AS-B-U-UA
A-AS-ACT-APC-B-U-UA
A-AS-ACT-APC-B-U-UA
✔ A-AS-ACT-APC-B-U-UA
A-AS-B-U-UA
✔**** A-AS-B-U-UA
A-AS-ACT-APC-B-U-UA
A-AS-ACT-APC-B-U-UA
✔ A-AS-ACT-APC-B-U-UA
✔**** A-AS-B-U-UA
✔ AS-B-U-UA
✔ AS-B-U-UA
A-AS-ACT-APC
✔ A-AS-ACT-APC
✔
✔
✔
**** = Only for the BV 1-row coil accessory.
***** = PX2C6, PX2 panel in multiple 6-piece pack.
****** = The VCF valve and the BC4 tray cannot be installed together
on a single fan coil.
13
Dimensions (mm)
Mod.
Heating capacity
Heating capacity *
(water inlet 50°C)
Heating capacity (electric resistor)
Water flow rate
Water pressure drops
Total cooling capacity
Sensible cooling capacity
Water flow rate
Air flow rate
Number of fans
 Sound pressure
Sound power
Water content
Max. motor power
Max input current
Max. motor power
with electric heater
Input current
Coil connections
FCX
W (max.)
W (med.)
W (min.)
W (E)
17
2490
2070
1610
1360
22
3400
2700
1915
2100
24
3950
3200
2200
2320
32
4975
4085
3380
3160
34
5850
4850
3850
3550
42
7400
6415
5115
4240
44
8600
6930
5200
5250
50
8620
7530
5420
4900
54
62
64
82
84
102
10100 12920 14300 15140 17100 17020
8760 10940 11500 13350 14420 15240
6240 8330 8500 10770 11200 12560
6100 6460 7810 7990 10400 9670
W
l/h
kPa
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.)(E)
dB (A) (med.)(E)
dB (A) (min.)(E)
l
(W) (E)
(A)
(W)
700
214
2,8
1000
890
720
830
710
540
172
2,6
200
160
110
1
36,5
29,5
22,5
45
38
31
0,58
35
0,16
735
950
292
6,3
1500
1330
1055
1240
1055
755
258
5,8
290
220
140
1
41,5
34,5
22,5
50
43
31
0,79
25
0,12
975
340
4
1730
1500
1150
1380
1140
828
297
3
290
220
140
1
42,5
37,5
26,5
51
46
35
1
33
0,25
-
1300
427
14,2
2210
2055
1570
1750
1540
1100
380
16,6
450
350
260
2
39,5
32,5
25,5
48
41
34
1,11
44
0,21
1344
503
8
2800
2450
2050
2130
1789
1441
482
9
450
350
260
2
39,5
32,5
27,5
48
41
36
1,5
44
0,45
-
1650
636
14,1
3400
2800
2310
2760
2115
1635
585
14,3
600
460
330
2
42,5
35,5
28,5
51
44
37
1,48
57
0,28
1707
740
21
4450
3780
2970
3300
2722
2079
765
19,2
600
460
330
2
46,5
41,5
32,5
55
50
41
1,9
57
0,51
-
1950
741
14,2
4190
3640
2840
3000
2750
2040
721
19,3
720
600
400
2
47,5
42,5
33,5
56
51
42
1,48
67
0,35
2017
869
22
4970
4770
3620
3540
3101
2281
855
25,9
720
600
400
2
47,5
44,5
35,5
56
53
44
1,9
67
0,36
-
2200
1110
14,8
4860
4660
3950
3980
3510
2825
836
11,6
920
720
520
3
48,5
42,5
33,5
57
51
42
2,52
82
0,4
2282
1230
22
6350
5520
4500
5030
4195
3330
1092
13
920
720
520
3
48,5
42,5
35,5
57
51
44
3,4
91
0,48
-
2200
1300
19,8
7420
5500
4710
5680
4250
3450
1276
13,5
1140
930
700
3
53,5
48,5
41,5
62
57
50
2,52
106
0,49
2306
1471
30
8600
7600
6270
5780
5016
4013
1479
22
1140
930
700
3
52,5
48,5
42,5
61
57
51
3,4
106
0,62
-
2200
1464
16,6
7620
7140
6270
5980
4984
4263
1311
19,2
1300
1120
900
3
57,5
52,5
47,5
66
61
56
2,52
131
0,58
2331
(A)
3,2
4,25
-
5,86
-
7,45
-
8,83
-
9,97
-
10,06
-
10,15
ø (4R)
ø (3R)
ø (1R)
1/2”
1/2”
1/2”
1/2”
3/4”
-
1/2”
1/2”
3/4”
-
3/4”
1/2”
3/4”
-
3/4”
1/2”
3/4”
-
3/4”
1/2”
3/4”
-
3/4”
1/2”
3/4”
-
3/4”
1/2”
Power supply = 230V ~ 50Hz
(E) = EUROVENT certificate performances
Performance values refer to the following conditions:
 Level of sound pressure (A-weighted) measured in the room with
volume V = 85 m 3; reverberation time t = 0.5 s; direction factor Q =
2; distance r = 2.5 m.
Cooling:
- Room air temperature 27°C D.B. ; 19°C W.B.
• maximum speed:
- water inlet temperature 7°C; Dt water 5°C.
• medium and minimum speed:
- water inlet temperature 7°C;
- water flow rate as at maximum speed.
Heating:
room air temperature 20°C D.B.
• maximum speed
Heating*:
• maximum speed
- water flow rate as for cooling operation.
VERSION
FCX A
FCX AS
FCX ACT
FCX APC
17
17
17
-
22
22
22
22
24
24
24
24
32
32
32
32
34
34
34
34
42
42
42
42
FCX B
17
22
24
32
34
42
44
FCX U
FCX UA
FCX UE
17
17
-
22
22
22
24
24
-
32
32
32
34
34
-
42
42
42
44
44
-
14
AVAILABLE SIZES
44
50
44
50
44
50
44
50
54
54
54
54
62
62
62
62
64
64
64
64
82
82
82
82
84
84
84
84
102
102
102
-
50
54
62
64
82
84
102
50
50
50
54
54
-
62
62
64
-
82
82
84
-
102
102
FCX A
FCX U 17 - 22 - 32 - 42 - 50
FCX AS
FCX U 24 - 34 - 44 - 54
FCX ACT
FCX UE 22 - 32 - 42 - 50
FCX APC
FCX B
FCX UA 17 - 22 - 32 - 42 - 50
FCX UA 24 - 34 - 44 - 54
FCX U 62 - 82 - 102
FCX U 64 - 84
FCX UE 62 - 82 - 102
Mod FCX (A - AS - ACT - APC)
Height with feet
Width
Feet height
Rear height with feet
Weight (without feet)
A
B
C
F
kg
17
563
640
105
88
13
22 / 24
563
750
105
88
15
32 / 34
563
980
105
88
20
42 / 44
563
1200
105
88
24
50 / 54
563
1200
105
88
24
62 / 64
688
1320
125
108
34
82 / 84
688
1320
125
108
34
102
688
1320
125
108
34
Mod FCX (U - UE)
Height
Width
Weight
D
B
kg
17
520
640
13
22 / 24
520
750
15
32 / 34
520
980
20
42 / 44
520
1200
24
50 / 54
520
1200
24
62 / 64
590
1320
34
82 / 84
590
1320
34
102
590
1320
34
Mod FCX (UA)
Height
Width
Weight
D
B
kg
17
490
640
13
22 / 24
490
750
15
32 / 34
490
980
20
42 / 44
490
1200
24
50 / 54
490
1200
24
Mod FCX (B)
Height
Width
Weight
D
B
kg
17
490
640
13
22 / 24
490
750
15
32 / 34
490
980
20
42 / 44
490
1200
24
50 / 54
490
1200
24
62 / 64
590
1320
34
82 / 84
590
1320
34
102
590
1320
34
Cod.: SFCXUY.15 / 110
Technical data
15
FCXI
Brushless electric motor
Fan coils with Inverter brushless motor
Continuous 0-100% air flow rate regulation
Universal, floor and ducted installation
FCXI P
The "brushless" electric motor is the result of
combining the most sophisticated technologies from
the fields of mechanics and electronics.
"Brushless" literally means "without brushes".
The brushless electric motor has no sliding contacts
between the rotor and the stator.
FCXI AS
White:
housing: RAL 9002
head and feet: RAL 7044
FCXI U
The future is Inverter
FCXI is the Aermec range of fan coils with continuous 0-100% air flow rate variation and therefore continuous heating/
cooling capacity variation.
Thanks to the Inverter technology, the FCXI continuously modifies the air flow rate, adapting it - moment by moment to the real needs in the room.
This produces considerable advantages in terms of electric savings, comfort and noise reduction compared with a
traditional on-off 3-speed fan coil.
•ELECTRIC SAVINGS OF 50% COMPARED WITH A FAN COIL WITH TRADITIONAL
3-SPEED MOTOR
•VERY QUIET OPERATION
•TOTAL COMFORT: REDUCED TEMPERATURE AND HUMIDITY VARIATIONS IN THE
AIR-CONDITIONED ROOMS
Air temperature in the
air-conditioned room
Traditional fan coil with 3-speed motor
FCXI Inverter with Brushless motor
Set point
Characteristics
• Full compliance with the accident preven FCXI AS: with tall cabinet
tion standards
FCXI U: with universal cabinet for floor/ cei- • Rounded line
ling installation
• Metallic protective cabinet with rustproofing
FCXI P: without cabinet for ceiling installation
polyester paint
• Adjustable air distribution grille, for U ver• Compatible with VMF System
sions
• Fan coil automatic power-off function with
• Fan unit with Brushless motor (continuous
closure of the air delivery grille, for U ver0-100% speed variation)
sions
• Quiet operation
16
Time (s)
• Low loss of charge in the heat exchange batteries
• Configurable during the installation phase using dip switches - to obtain greater head at
nominal delivery, for P versions
• Ease of installation and maintenance
• Water connections can be reversed during
installation phase
In brushless motors, the rotor consists of permanent
magnets whose magnetic field interacts - without any
mechanical contact - with the stator windings. With
the special inverter device, it is possible to control the
speed and torque of the rotor continuously, just by
means of the stator currents.
Compared with the traditional alternate current motors,
the brushless motor offers huge advantages:
- reduced wear and tear
- the possibility to adjust the rotation speed
accurately and continuously (0-100%)
- higher energy yields
- longer life and greater reliability
These characteristics have made the brushless motor
irreplaceable in a wide variety of applications:
- robotics
- automotive
- precision drives
- CD/DVD players
- medical equipment
- etc.
Thanks to Aermec's FCXI range of inverter fan coils,
brushless technology can now make inroads in the
field of chilled water air conditioning, bringing notable
energy savings along with the precise contro of both air
temperature and humidity in the air-conditioned
rooms.
Accessories
Compulsory accessory,
essential for unit operation:
•WMT20: Control panel with electronic
thermostat and LCD monitor.
Essential for operation.
Wall mounting.
•VMF System: the characteristics are
described on the appropriate card.
Accessories:
•AMP: Kit for ceiling installation, for versions FCXI P and FCXI U.
•BC: Auxiliary condensate drip tray.
•BV: 1-row hot water coil.
The accessory is not available for the 4R
models.
•CHF: VentilCassaforma is a galvanised
metal template that allows you to create
a space directly in the wall for housing
the fan coil. The template facilitates
masonry work during the construction of
the niche where the fan coil will be
installed. When the work is finished, the
fan coil will be completely hidden from
sight. (For FCXI P only).
•DSC4: Condensate drainage device for
use when natural run-off is not possible.
•GA: Intake grille with fixed fins.
•GAF: Intake grille with fixed fins and filter.
•GM: Delivery grille with adjustable fins.
•MA: A-type covering cabinet (use tray
accessory BC 4 for FCXI AS).
•MU: U-type covering cabinet (use tray
accessory BC 5-6 for FCXI U).
•PA: Plenum suction assembly in galvanised sheet metal, complete with suction
couplings for circular-section ducts.
•PA-F: Plenum suction assembly that
allows intake and delivery on the same
side; suitable for all installations where
the machine needs to be positioned outside the air-conditioned rooms in order
to minimise noise levels and facilitate
maintenance operations.
•PC: Sheet metal panel to close rear of
unit.
•PM: Delivery plenum in galvanised
sheet metal, externally insulated, complete with plastic delivery couplings for
circular section ducts.
•RD: Straight delivery coupling for canalisation.
•RDA: Straight suction coupling for canalisation.
•RP: 90° delivery coupling for canalisation.
•RPA: 90° suction coupling for canalisation.
•SE: External air damper with command
FCXI P and FCXI AS.
•SWI: Water temperature probe for WMT20
control panels. Cable length L = 2m.
•VCF: Kit comprising motorized 3 way
valve with isolating shell, unions and
insulated copper pipes. For 3/4-row and
1-row coils (BV). Versions with 230V
and 24V~50Hz power supply.
•VCFD: Kit consisting of powered 2-way
valve, copper couplings and pipes. For
3/4-row and 1-row coils (BV).
•ZX: Feet for floor installations for FCXI
AS models.
17
20
WMT20
AMP*
AMP20
BC
BV**
CHF
DSC4*
GA
GAF
GM
MA
MU
PA
PA
PC
PCR
PM
RD
RDA
RP
RPA
SE
SWI
VCF
*****
VCFD
ZX
18
✔
4*****
5
6
8
9
122
132
142
162
22
32
42
62
22
32
42
62
22
32
42
62
22
32
42
62
22
32
42
62
22
32
42
62
22
32
42
62
22F
32F
42F
62F
22
23
32
33
42
43
62
1
2
22
32
42
62
22
32
42
62
22
32
42
62
22
32
42
62
22
32
42
62
20X
30X
40X
80X
41 - 4124***
42 - 4224***
43 - 4324***
44 - 4424***
45 - 4524***
1 - 124****
2 - 224****
3 - 324****
4 - 424****
5
6
7
8
30
✔
FCXI fan coil
Size
40
✔
50
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
80
✔
AS - U - P
✔
✔
✔
U-P
U-P
AS - (P+MA)
U - (P+MU)
U - (P+MU)
P
P
AS - U - P
AS - U - P
AS - U - P
AS - U - P
P
P
P
P
AS - U - P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
AS
U
AS
U
AS
U
AS - U
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
AS - P
AS - P
AS - P
AS - P
AS - U - P
AS - U - P
AS - U - P
AS - U - P
AS - U - P
AS - U - P
AS - U - P
AS - U - P
AS - U - P
AS - U - P
AS
AS
P
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔****
✔****
✔
✔
✔****
✔
✔****
✔
✔
✔
✔
✔
✔
✔****
✔****
✔
✔
✔****
✔
✔****
✔
✔
✔
✔
✔****
✔
✔****
✔
✔
✔
✔
* = The DSC4 accessory is not compatible with AMP accessory. The DSC4 accessory
is compatible with AMP20 accessory.
*** = 24 Volt.
Versions
✔
✔
**** = Only for accessory coil BV 1R.
***** = The BC4 accessory is not available for models fitted with VCF valve.
Technical data
Mod.
FCXI
W (max.)
W (min.)
W (max.)
W (min.)
l/h
kPa
W (max.)
W (min.)
W (max.)
W (min.)
l/h
kPa
m3/h (max.)
m3/h (min.)
n.
dB(A) Vel. max
dB(A) Vel. med
dB(A) Vel. min
dB(A) Vel. S.min
dB(A) (max.)
dB(A) (min.)
l
W (max.)
A (max.)
W (max.)
A (max.)
ø Gas
Heating capacity (inlet water 70°C)
Heating capacity (inlet water 50°C) (E)
Water flow rate
Water flow rate
Air flow rate
Number of fans
 Sound pressure
Sound power
Water content
Input power
Input current
Input power** (Maximum head)
Input current** (Maximum head)
Heat exchanger water connections
20
3400
1080
2100
670
292
6,3
1500
520
1240
370
258
5,8
290
70
1
41,5
34,5
22,5
21,5
50
30
0,79
12
0,11
36
0,33
1/2”
30
4975
1410
3160
900
427
14,2
2210
690
1750
500
380
16,6
450
115
2
39,5
32,5
25,5
18.5
48
28
1,11
12
0,11
45
0,41
1/2”
40
7400
1700
4240
980
636
14,1
3400
760
2760
550
585
14,3
600
140
2
42,5
35,5
28,5
21,5
51
30
1,48
16
0,14
57
0,5
3/4”
50
8620
1830
4900
1040
741
14,2
4190
800
3000
536
721
19,3
720
140
2
47,5
42,5
33,5
21,5
56
30
1,48
37
0,3
62
0,51
3/4”
80
15140
2740
7990
1450
1300
19,8
7420
1170
5680
830
1276
13,5
1140
190
3
53,5
48,5
41,5
23,5
62
32
2,52
75
0,57
102
0,78
3/4”
(E) = Eurovent certified performance
 Level of sound pressure (A-weighted) measured in the room with volume
V = 85 m 3; reverberation time t = 0.5 s; direction factor Q = 2; distance
r = 2.5 m.
** FCXI P version with internal dip-switch setting to obtain the
maximum head at nominal delivery.
Cooling:
- room air temperature 27°C D.B., 19°C W.B;
- inlet water temperature 7°C; maximum speed;
- Dt water 5°C.
- for medium and low speed water flow rate, remains the same as at
maximum speed.
Heating:
room air temperature 20°C D.B.;
• maximum speed:
- water inlet temperature 70°C; Dt water 10°C;
Heating*:
room air temperature 20°C D.B.;
• maximum speed
Dimensions (mm)
FCXI AS
FCXI 20P - 30P - 40P - 50P
FCXI 20U - 30U - 40U - 50U
FCXI 80U
Mod FCXI
Height with feet
Width
Height of feet
Rear height with feet
Weight (without feet)
20 AS 30 AS 40 AS 50 AS 80 AS
A
563
563
563
563
688
B
750
980 1200 1200 1320
C
105
105
105
105
125
F
88
88
88
88
108
kg
15
20
24
24
34
Mod FCXI
Height
Width
Weight
D
E
kg
20 U
520
750
15
30 U
520
980
20
40 U
520
1200
24
50 U
520
1200
24
80 U
590
1320
34
FCXI 80P
FCXI
A
B
C
D
E
F
G
H
L
M
N
Weight (kg)
20P
453
562
216
440
41
101
74
260
144
49
522
13
30P
453
793
216
671
41
101
74
260
144
49
753
18
40P
453
1013
216
891
41
101
74
260
144
49
973
22
50P
453
1013
216
891
41
101
74
260
144
49
973
22
80P
558
1147
216
1102
41
107
68
273
253
32
1122
33
19
Cod.: SFCXIUY.01 / 1007
Accessories
FCX P
Accessories
Fan coils
Duct installation
CHF
DSC4*
GA
GAF
Aermec
Plasmacluster
GM
Features
- Vertical installation:
FCX PV: wall-mounted model without cabinet
• Versions with 3-row coil (FCX 17, 22, 32, 42,
50, 62, 82, 102)
• Versions with 4-row coil (FCX 24, 34, 44, 54,
64, and 84)
• 3-speed ventilating unit
standards
• Compatible with the VMF system
• Wide range of controls and accessories
• Quiet operation
- Vertical and horizontal installation:
FCX P: wall-mounted model without cabinet
FCX PPC: (FCX 22, 24, 32, 34, 42, 44, 50, 54,
62, 64, 82, 84) wall/ceiling mounting without
cabinet, with Plasmacluster purifier. Compatible
with the VMF system, or you can request a combination with the PXAE control panel
FCX PE: wall-mounted model without cabinet
and with direct expansion coil
FCX PO: cabinet with 6-speed (3 of which
can be selected) boosted motor (FCX 22, 32,
42, 50, 62, 64 , 82, 84)
• Low loss of charge in batteries
• Electric motors with permanently inserted condensers
• Possibility of a residual head for ducting (if required)
• Internal insulation and air filter in fire resistance
class 1
• Water connections can be reversed during installation phase
• AMP: Kit for overhang installation.
• BC: Auxiliary condensate drip tray.
• BV: 1-row hot water coil. Not available for
4-row versions or those with Plasmacluster.
• CHF: VentilCassaforma is a galvanised metal
template that allows you to create a space
directly in the wall for housing the fan coil. The
template facilitates masonry work during the
construction of the niche where the fan coil will
be installed. When the work is finished, the fan
coil will be completely hidden from sight. (For
FCX P - PV only).
• DSC4: Condensate drainage device for use
when natural run-off is not possible.
• GA: Intake grille with fixed fins.
• GAF: Intake grille with fixed fins and filter.
• GM: Delivery grille with adjustable fins.
• MA: A-type covering cabinet (use tray accessory BC 4 for FCX AS).
• MU: U-type covering cabinet (use the BC 5-6
tray accessory if horizontal, or BC 4 if vertical).
• PCR: Galvanised plate protection for the controls and the electrical element.
• PA: Plenum suction assembly in galvanised
sheet metal, complete with suction couplings
for circular-section ducts.
• PA-F: Plenum suction assembly that allows
intake and delivery on the same side; suitable
BC
BV **
20
MU
PA
PA
Accessories
Accessories
FMT10
FMT20AW
KTLP
PX
PX2 •PX2C6*****
PXAE
PXAR
TF1
WMT05
WMT10
AMP*
AMP20
MA
4******
5
6
8
9
117
122
132
142
162
for all installations where the machine needs
to be positioned outside the air-conditioned
rooms in order to minimise noise levels and
facilitate maintenance operations.
• PM: Delivery plenum in galvanised sheet metal,
externally insulated, complete with plastic delivery couplings for circular section ducts.
• RD: Straight delivery coupling for canalisation.
• RDA: Straight suction coupling for canalisation.
• RP: 90° delivery coupling for canalisation.
• RPA: 90° suction coupling for canalisation.
• RX: Armoured electric coil with safety thermostat. (Requires a thermostat with heater
management). Not available for 4-row versions or those with Plasmacluster.
• SIT 3 - 5: Thermostat Interface Cards. They
SIT3: commands the 3 fan speeds and must
the SIT5 card.
valves (four pipes systems); sends the commands of the thermostat to the fan coils network.
17
22
24
32
34
FCX Fan Coil
42
44
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
• SW: water temperature probe that gives the automatic season change feature to electronic thermostats supplied with water-side change over.
• SWA: ASWA external probe accessory (length L =
6m). The probe detects the temperature of the
ambient air if connected to the connector (A) of
the panel FMT20AW; the ambient air temperature
probe incorporated in the panel is automatically
deactivated. Detects the water temperature in the
system for ventilation consent, if connected to the
connector (W) of the FMT20AW panel. Two SWA
probes can be connected to the panel FMT20AW
simultaneously.
• VCF: the kit contains a motorised 3-way valve
with insulating shell, plus coupling and pipes
in insulated copper. For 4-row, 3-row and
1-row coils (BV). Versions with 230V and
24V~50Hz power supply.
• VCFD: Kit consisting of powered 2-way
valve, copper couplings and pipes. For 4-row,
3-row and 1-row coils (BV). Versions with
230V and 24V~50Hz power supply.
• ZX: Feet for recessed installation.
• Control panels and VMF System: the characteristics are described on the appropriate
card.
54
62
64
82
84
102
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PM
RD
RDA
RP
RPA
RX**
50
✔
PCR
✔
✔
Versions
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV-PPC
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PPC
P-PE-PO-PPC
FCX P-PV+ MA
FCX P + MU
FCX P + MU
P-PE-PO-PPC
P-PE-PO-PPC
P-PE-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
SE
SIT
SW3
SWA
VCF
******
VCFD
ZX
17
22
32
42
62
17
22
32
42
62
17
22
32
42
62
17
22
32
42
62
17
22
32
42
62
17
22
32
42
62
17
22
32
42
62
17 F
22 F
32 F
42 F
62 F
1
2
17
22
32
42
62
17
22
32
42
62
17
22
32
42
62
17
22
32
42
62
17
22
32
42
62
17
22
32
42
52
62
15X
20X
30X
40X
80X
3
5
41 - 4124***
42 - 4224***
43 - 4324***
44 - 4424***
45 - 4524***
1 - 124***
2 - 224***
3 - 324***
4 - 424***
7
8
17
22
24
✔
✔
32
34
✔
✔
FCX Fan Coil
42
44
50
54
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
62
64
82
84
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔****
✔****
✔
✔
✔****
✔
✔****
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔****
✔
✔
✔
✔****
✔****
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔****
✔****
✔
✔****
✔
✔
✔
✔
✔****
✔
* = The DSC4 accessory is not compatible with the installation brackets AMP. The DSC4
accessory is compatible with the installation brackets AMP20.
*** = 24 Volt.
✔
✔
✔
✔****
✔
✔
✔
✔****
✔
✔
✔****
✔
✔
✔
✔
✔
✔
102
Versions
P-PV
P-PV
P-PV
P-PV
✔
P-PV
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
P-PE-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PPC
P-PE-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
P-PE-PO-PV
✔
P-PE-PO-PV
P-PE-PV
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
✔
P-PE-PO-PV
✔
P-PE-PO-PV-PPC
✔
P-PO-PV
✔
P-PO-PV
P-PO-PV-PPC
P-PO-PV-PPC
✔
P-PO-PV-PPC
P-PO-PV
✔**** P-PO-PV
P-PO-PV-PPC
P-PO-PV-PPC
✔
P-PO-PV-PPC
✔**** P-PO-PV
P-PE-PO-PV-PPC
✔
P-PE-PO-PV-PPC
**** = Only for the BV 1-row coil accessory.
***** = PX2C6, PX2 panel in multiple 6-piece pack.
****** = The VCF valve and the BC4 tray cannot be installed together on
a single fan coil.
21
Technical data
Dimensions (mm)
Mod.
Heating capacity
Heating capacity* (water inlet 50°C)
Heating capacity (electric resistor)
Water flow rate
Water flow rate
Air flow rate
Number of fans
 Sound pressure
Sound pressure FCX PO
Sound power FCX PO
Sound power
Water content
Max. motor power (W)
Max input current (A)
Max. motor power
Max input current
(W)
(A)
Coil connections
FCX
W (max.)
W (med.)
W (min.)
W (E)
W
l/h
kPa
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.)
dB (A) (max.)
dB (A) (max.)(E)
dB (A) (med.)(E)
dB (A) (min.)(E)
l
FCX P (E)
FCX PO
FCX P
FCX PO
FCX P
FCX PO
FCX P
FCX PO
ø (4R)
ø (3R)
ø (1R)
17
2490
2070
1610
1360
700
214
2,8
1000
890
720
830
710
540
172
2,6
200
160
110
1
36,5
29,5
22,5
45
38
31
0,58
35
0,16
735
3,2
1/2”
1/2”
22
3400
2700
1915
2100
950
292
6,3
1500
1330
1055
1240
1055
755
258
5,8
290
220
140
1
41,5
34,5
22,5
49,5
58
50
43
31
0,79
25
54
0,12
0,25
975
1004
4,25
4,38
1/2”
1/2”
24
3950
3200
2200
2320
340
4
1730
1500
1150
1380
1140
828
297
3
290
220
140
1
42,5
37,5
26,5
49,5
58
51
46
35
1
33
54
0,25
0,25
3/4”
-
32
4975
4085
3380
3160
1300
427
14,2
2210
2055
1570
1750
1540
1100
380
16,6
450
350
260
2
39,5
32,5
25,5
44
52,5
48
41
34
1,11
44
97
0,21
0,45
1344
1397
5,86
6
1/2”
1/2”
34
5850
4850
3850
3550
503
8
2800
2450
2050
2130
1789
1441
482
9
450
350
260
2
39,5
32,5
27,5
44
52,5
48
41
36
1,5
44
97
0,45
0,45
3/4”
-
42
7400
6415
5115
4240
1650
636
14,1
3400
2800
2310
2760
2115
1635
585
14,3
600
460
330
2
42,5
35,5
28,5
50
58,5
51
44
37
1,48
57
111
0,28
0,51
1707
1761
7,45
7,68
3/4”
1/2”
44
8600
6930
5200
5250
740
21
4450
3780
2970
3300
2722
2079
765
19,2
600
460
330
2
46,5
41,5
32,5
50
58,5
55
50
41
1,9
57
111
0,51
0,51
3/4”
-
50
54
62
64
82
8620 10100 12920 14300 15140
7530 8760 10940 11500 13350
5420 6240 8330 8500 10770
4900 6100 6460 7810 7990
1950
2200
2200
741
869 1110 1230 1300
14,2
22
14,8
22
19,8
4190 4970 4860 6350 7420
3640 4770 4660 5520 5500
2840 3620 3950 4500 4710
3000 3540 3980 5030 5680
2750 3101 3510 4195 4250
2040 2281 2825 3330 3450
721
855
836 1092 1276
19,3 25,9 11,6
13
13,5
720
720
920
920 1140
600
600
720
720
930
400
400
520
520
700
2
2
3
3
3
47,5 47,5 48,5 48,5 53,5
42,5 44,5 42,5 42,5 48,5
33,5 35,5 33,5 35,5 41,5
50,5 50,5 53,5 53,5 55,5
59
59
62
62
60
56
56
57
57
62
51
53
51
51
57
42
44
42
44
50
1,48
1,9
2,52
3,4
2,52
67
67
82
91
106
82
82
97
97
135
0,35 0,36
0,4
0,48 0,49
0,36 0,36 0,48 0,48 0,62
2017
2282
2306
2032
2297
2335
8,83
9,97
10,06
8,84
10,05
10,19
3/4”
3/4”
3/4”
3/4”
3/4”
1/2”
1/2”
1/2”
84
17100
14420
11200
10400
1471
30
8600
7600
6270
5780
5016
4013
1479
22
1140
930
700
3
52,5
48,5
42,5
55,5
64
61
57
51
3,4
106
135
0,62
0,62
3/4”
-
102
17020
15240
12560
9670
2200
1464
16,6
7620
7140
6270
5980
4984
4263
1311
19,2
1300
1120
900
3
57,5
52,5
47,5
66
61
56
2,52
131
0,58
2331
10,15
3/4”
1/2”
FCX 17 - 22 / 24 - 32 / 34 - 42 / 44 - 50 / 54
FCX
A
B
C
D
E
F
G
H
L
M
N
Weight [Kg]
17
453
452
216
330
41
101
74
260
144
49
412
11
FCX 62 / 64 - 82 / 84 - 102
22 / 24
453
562
216
440
41
101
74
260
144
49
522
13
32 / 34
453
793
216
671
41
101
74
260
144
49
753
18
PA - INTAKE PLENUM
42 / 44
453
1013
216
891
41
101
74
260
144
49
973
22
50 / 54
453
1013
216
891
41
101
74
260
144
49
973
22
62 / 64
558
1147
216
1102
41
107
68
273
253
32
1122
33
82 / 84
558
1147
216
1102
41
107
68
273
253
32
1122
33
102
558
1147
216
1102
41
107
68
273
253
32
1122
33
PM - DELIVERY PLENUM
Cooling:
- Room air temperature 27°C D.B. ; 19°C W.B.
- water inlet temperature 7°C; Maximum speed
- Dt water 5°C.
- for medium and low speed, the water flow rate remains the same as
at maximum speed.
Heating 70°:
• maximum speed
Heating 50°:
• maximum speed
PA
A
Vents
17
390
1
22
500
2
32
731
2
42
951
3
62
1072
4
PM
A
Vents
17
412
1
22
522
2
32
753
2
42
973
3
62
1094
4
PA-F - FRONT INTAKE PLENUM
PM
PA-F
17
17
-
22
22
22
22
22
24
24
24
24
32
32
32
32
32
34
34
34
34
42
42
42
42
42
AVAILABLE SIZES
44
50
44
50
44
50
50
44
50
54
54
54
54
62
62
62
62
62
64
64
64
64
82
82
82
82
82
84
84
84
84
102
102
102
-
L
Vents
PA 17 F
658
1 [A]
PA 22 F PA 32 F PA 42 F PA 62 F
768
1039
1259
1381
1 [A] 2 [A+B*] 2 [A+B*] 2 [A+B]
Cod.: SFCXPUY.12 / 1101
VERSION
FCX P
FCX PV
FCX PO
FCX PE
FCX PPC
B* = Closed inlet vent, to use it remove the push-out closing
component.
22
23
Technical data
VEC
Mod. VEC
Cassette type fancoil Coanda-effect
Installation in false ceilingsInstallation in false
ceilings
Water flow rate
Air flow rate
Number of fans
 Sound pressure
Sound power
Features
VEC: Fan coil for ambient air treatment
during the summer. The air is delivered into
the room via vents which, thanks to the
COANDA effect, make the air jet adhere to
the ceiling.
• Available in 4 sizes
• Installation in false ceilings
• Compatible with VMF System
• Grille with suction and adjustable delivery
vents with Coanda effect (compulsory accessory).
• 3-row coil
• Reduced pressure drops across heat exchangers
• For systems with fixed and variable delivery
• EUROVENT certified
• 3-speed fan unit
• Quiet operation
• Motors with permanently connected condensers
• Air filter easily removed and cleaned
• Internal insulation and air filter of Class 1 fire
resistance
• Removable shrouds for easy, effective cleaning
• Reversibility of the water connections during
installation
• Broad range of controls and accessories
• Easy installation and maintenance
• Full compliance with safety regulations
• For possible heat mode functioning, refer to
the technical manual notes.
20
1320
1085
805
1085
885
640
227
4,6
247
194
130
1
39,5
33,5
26,5
48,0
42,0
35,0
0,79
25
0,12
975
4,25
1/2"G
1/2"G
W (max)
W (med)
W (min)
W (max)
W (med)
W (min)
l/h
kPa
m3/h (max)
m3/h (med)
m3/h (min)
n.
dB (A) (max)
dB (A) (med)
dB (A) (min)
dB (A) (max)
dB (A) (med)
dB (A) (min)
l
W
A
W
A
ø
ø
Water content
Max. motor power
Max. input current
Max. power with electric resistor (RX)
Input current with electric resistor
3-row coil connections
1-row coil connections (BV)
30
1950
1645
1370
1535
1285
1055
335
13,3
383
309
241
2
36,5
31,5
26,5
45,0
40,0
35,0
1,11
44
0,21
1344
5,86
1/2"G
1/2"G
40
2985
2470
1985
2410
1980
1580
514
11,3
511
406
306
2
40,0
34,5
29,5
48,5
43,0
38,0
1,48
57
0,28
1707
7,45
3/4"G
1/2"G
50
3610
3170
2350
2595
2275
1680
621
14,8
613
529
371
2
44,5
41,5
34,5
53,0
50,0
43,0
1,48
67
0,35
2017
8,83
3/4"G
1/2"G
Heating mode: see notes and warnings in the technical booklet.
Electricity supply = 230V ~ 50Hz
(E) = EUROVENT certificate performance
Cooling:
- room air temperature 27°C D.B. ; 19°C W.B.
- inlet water temperature 7°C
- Dt water 5°C
Dimensions (mm)
VEC30GL
VEC20GL
VEC40GL
62
Ø2
595
595
15
Compulsory accessories:
SIT 3-5: thermostat interface cards. These
FMT20AW; in this case the ambient air tem the following are essential for the functioallow you to create a network of fan coils
perature probe built into the panel will be
ning of the units:
(max. 10), commanded from a centralised
automatically disabled. Detects the tempera• VEC_GL: air suction and delivery grille with
ture of the water in the system to allow ventiadjustable Coanda-effect vents.
SIT3: commands the 3 fan speeds, and must
lation consent if connected to the connector
White RAL 9010.
be installed on each fan coil in the network;
(W) of the panel FMT20AW. Two SWA probes
• Control panel and VMF system: the features
may be simultaneously connected to the
of the control panels are described in the
SIT5 card.
panel FMT20AW.
relevant card.
SIT5: commands the 3 fan speeds and up to 2 • VCF: kit consisting of a 3-way motorised
valves (4-pipe systems); conveys the thermovalve, and copper couplings and pipes. For
Accessories:
stat commands to the fan coil network.
• AMP: kit for wall-mounting installation.
• SW3: water temperature probe, allowing the
• BC5: auxiliary condensate drain tray.
implementation of automatic season chan- • VCFD: Kit consisting of a 2-way motorised
• BV: Single row hot water coil.
geover for those electronic thermostats equipvalve, and copper couplings and pipes. For
• DSC4: condensate drainage device for use
ped with water side changeover.
• SWA: SWA external probe accessory (length L
• PCR1: galvanised sheet metal protection for
= 6m). Detects the ambient air temperature if
the commands and the electric resistor.
connected to the connector (A) of the panel
595
Accessoires
volume V = 85 m3 ; reverberation time t = 0.5 s; direction factor Q = 2;
distance r = 2.5 m.
FMT10
FMT20AW
KTLP
PX2
PXAE
PXAR
WMT05
WMT10
✔
✔
✔
✔
✔
✔
✔
✔
30
40
50
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Accessory
AMP
AMP
20
BC
5
122
BV
132
142
DSC
4
SIT
3
SIT
5
PCR1
20
✔
✔
✔
✔
30
✔
✔
✔
40
✔
✔
✔
50
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Accessory
SW
3
SWA
41
42
44*
VCF
4124
4224
4424*
1
2
4*
VCFD
124
224
424*
20
✔
✔
✔
30
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
VEC
15
595
40
✔
✔
50
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
A
895
4
57
1195
Mod.
A
Weight (VEC)
Weight (VEC GL)
VEC
VEC
mm
kg
kg
020
20GL
574
15,5
3,7
030
30GL
874
20,6
5,7
040
40GL
1174
24,7
7
050
40GL
1174
24,7
7
✔
✔
✔
✔
✔
✔
* = only for accessory coil BV 1R
24
25
Cod.: SVECUY.02 / 1007
20
✔
VEC
277
Accessory
VEC20GL
VEC30GL
VEC40GL
VEC
Omnia HL
Technical data
Mod. Omnia
Fan coils
W (max.)
W (med.)
W (min.)
W (E)
l/h
kPa
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.) (E)
dB (A) (med.) (E)
dB (A) (min.) (E)
l
W (E)
A
ø
Heating capacity
Heating capacity (water inlet 50°C)*
Water flow rate
Water pressure drop
White colour:
cover: RAL 9002
top and supports: RAL 7044
Plasmacluster
(only for Omnia HL PC and PCM)
Grey colour:
cover: FIAT 656
Features
• HL (High Line) fan coils for both horizontal
and vertical installation
• 4 sizes and 10 versions:
HL: white body with switch
HL M: metallic grey body with switch
HL C: white body with electronic thermostat
HL CM: metallic grey body with electronic thermostat
HL N: white body with electronic thermostat VMF
HL NM: metallic grey body with electronic thermostat VMF
HL L: white cabinet with Self-Closing Louver
and electronic thermostat
HL LM: grey cabinet with Self-Closing Louver
and electronic thermostat
HL PC: white body with electronic thermostat
and Plasmacluster filter (factory-mounted only)
HL PCM: metallic grey body with electronic thermostat and Plasmacluster filter (factory-mounted only)
HL S: white body with no on-board controls
VMF System compatible
HL SM: metallic grey body with no on-board
controls. VMF System compatible
• 3-speed centrifugal fan
• Very quiet operation
• Aesthetically styled with soft flowing lines
• New adjustable air delivery louver
• Automatic power-off function with closure of
the air delivery louver
• Slim dimensions
• Electronic temperature control, automatic fan
speed change, automatic season changeover
and automatic on - off (with electronic thermostat)
• Water connections reversibility during installation
• Low pressure drop across heat exchanger
• SWA: External probe accessory SWA (length L =
6m). It detects the temperature of the room air if
connected to the connector (A) of the
FMT20AW panel. The room air temperature
probe, incorporated in the panel, is automatically disabled. It detects the temperature of the
water in the system for ventilation consent if
connected to the connector (W) of the
FMT20AW panel. Two SWA probes can be connected simultaneously to the FMT20AW panel.
• VCH: Kit comprising motorized 3-way valve,
unions and copper pipes.
• ZH1: White feet for floor-standing installations
• ZH1B: White feet for floor-standing installations with skirting board.
• ZH1M: Gray feet for floor-standing installations
• ZH1MB: Gray feet for floor-standing installations with skirting board.
• Control panels and VMF system: the characteristics of the control panels are described on the
appropriate card.
Compatibility of accessories
Omnia HL 11162636Versioni
AMP 10
✔ ✔ ✔ ✔ All except S, SM
BC 10
✔ ✔ ✔ ✔All
BC 20
✔ ✔ ✔ ✔All
DSC5
✔ ✔ ✔ ✔All
FMT10
✔ ✔ ✔ ✔ S, SM
FMT20AW
✔ ✔ ✔ ✔ S, SM
✔ ✔ ✔ ✔All
PCH/PCHM
PX2 • PX2C6 ✔ ✔ ✔ ✔ S, SM
PXAE
✔ ✔ ✔ ✔ S, SM
SIT 3
✔ ✔ ✔ ✔ S, SM
SIT 5
✔ ✔ ✔ ✔ S, SM
✔ ✔ ✔ ✔ S, SM
SW3
SWA
✔ ✔ ✔ ✔ S, SM
VCH
✔ ✔ ✔ ✔ All except L, LM
WMT05
✔ ✔ ✔ ✔ S, SM
WMT10
✔ ✔ ✔ ✔ S, SM
ZH1/ZH1B
✔ ✔ ✔ ✔All
ZH1M/ZH1MB ✔ ✔ ✔ ✔All
Accessories
• AMP: Kit for wall/ceiling mounting. Standard
on S and SM versions.
BC 10 for vertical installation
BC 20 for horizontal installation
• PCH - PCHM: Back closing panel, white
(PCHM) or gray (PCHM).
• SIT 3-5: Thermostat interface cards. They
allow to set up a fancoils network (max. 10)
commanded by a centralised panel (switch or
thermostat)
SIT3: commands the three speeds of the fan
and must be installed on each fancoil of the
network; it receives the commands from the
switch or from the SIT5 card.
SIT5: commands the 3 fan speeds and up to
two valves (four-pipe systems); it sends the
thermostat commands to the fancoils network.
• SW: Water probe wich enables automatic
season change-over thanks to the specific
electronic thermostats.
Water flow rate
Water pressure drop
Air flow rate
Fans
 Sound pressure
Sound power
Water contents
Max. motor power
Max. input current
Coil connections
HL 11
2010
1460
1060
1150
173
1,6
840
650
490
700
530
390
144
1,9
180
120
80
1
37,5
28,5
22,5
46,0
37,0
31,0
0,4
18
0,09
1/2”
HL 16
2910
2120
1540
1700
250
3,7
1200
950
690
990
750
520
206
4,8
240
160
110
1
39,5
34,5
25,5
48,0
43,0
34,0
0,5
32
0,15
1/2”
HL 26
4620
3830
2890
2750
397
10,5
2030
1780
1420
1640
1370
1050
349
11,0
350
270
190
2
39,5
34,5
26,5
48,0
43,0
35,0
0,8
35
0,18
1/2”
HL 36
5940
4870
3530
3540
511
7,4
2830
2310
1730
2040
1790
1280
487
9,5
460
350
240
2
39,5
32,5
25,5
48,0
41,0
34,0
1,1
42
0,22
1/2”
Cooling:
- room air temperature 27 °C D.B. , 19 °C W.B.
- water inlet temperature 7 °C ; max. speed
- Dt water 5 °C
- for medium and low speed, water flow rate remains same as at
maximum speed
Heating:
- room air temperature 20 °C
- water inlet temperature 70 °C ; maximum speed;
- Dt water 10 °C;
maximum speed
Heating*:
- water inlet temperature 50 °C
- maximum speed
- water flow same as in cooling operation
Dimensions (mm)
PX2C6, PX2 panel in multiple 6-piece pack.
• Versions compatible with VMF System.
• Precharged electrostatic filter: Omnia fan
molecules present in the air to separate into
• Fan cleaning: Omnia fan coils allow fan blacoils have, as standard, precharged electropositive and negative ions. These ions neutrades to be easily cleaned. It is now possible to
static filters. These filters, thanks to their spelise the gas pollutant molecules, forming proremove the fan volute (it contains the fan blacial execution, attracts and retains all suspenducts that are normally present in clean air.
des) and clean it periodically.
ded dust particles, thus garanteeing pure
The result is in the air: you can finally breath
• Condensate drip tray cleaning: Thanks to a
breathable air to the whole family.
clean, odour-free ionised air.
new drip tray fitting, it is now easier to clean • P L A S M A C L U S T E R i o n i s i n g f i l t e r : • Silent operation: Thanks to the use of special
it with Omnia fan coils. This important soluPlasmacluster is capable of reducing the level
centrifugal fans, Omnia fan coils operation is
tion avoids, in the long run, bacteria, germs
of pollutants, by decomposing the molecules
extremely silent and offers the maximum
and mould to grow up, in the drip tray becauthat form them. Using a series of electric
acoustic comfort.
se of the air humidity.
shocks, "Plasmacluster" causes the water
26
Mod Omnia
Height
Width
Depth
Height
Weight
A
B
C
D
[kg]
HL 11
600
640
187
93
13,6
HL 16
605
750
189
93
14,6
HL 26
615
980
191
93
17,6
HL 36
623
1200
198
93
20,6
Cod.: SOHLUY.14 / 1007
Main features
Omnia UL
Technical data
Mod. Omnia
Fan coils
Heating capacity
Heating capacity (water inlet 50°C)*
Water flow rate
Water pressure drop
Omnia UL-P
Water flow rate
Water pressure drop
Plasmacluster
(only for Omnia UL PC)
White colour:
cover: RAL 9002
Omnia UL
Features
• UL (Universal Line) fan coils for both horizontal and vertical installation
• 4 sizes and 5 versions:
UL-S: version without switch, with cabinet.
Compatible with VMF System
UL: version with switch and cabinet
UL-C: version with electronic thermostat and
with cabinet
UL-PC: version with electronic thermostat
and Plasmacluster filter (factory-mounted
only) and cabinet
UL-P: ceiling mounting version without cabinet. Compatible with VMF System
• 3-speed centrifugal fan
• Adjustable air delivery louver
• Automatic power-off function with closure of
the air delivery louver
• Slim dimensions
• Electronic temperature control, automatic fan
speed change, automatic season changeover
and automatic on - off (with electronic thermostat)
• Water connections reversibility during installation
• Low pressure drop across heat exchanger
• Air filter easy to remove and to clean
• SW: Water probe wich enables automatic
season change-over thanks to the specific
electronic thermostats.
• SWA: External probe accessory SWA (length L
= 6m). It detects the temperature of the room
air if connected to the connector (A) of the
probe, incorporated in the panel, is automatically disabled. It detects the temperature of
the water in the system for ventilation consent
if connected to the connector (W) of the
FMT20AW panel. Two SWA probes can be
connected simultaneously to the FMT20AW
panel.
• VCH: Kit comprising motorized 3-way valve,
unions and copper pipes.
• ZU: Feet for floor-standing solutions.
• Control panels and VMF System: The control
panels are described in a separate document.
Omnia UL
11162636
Versions
AMP 10
✔
✔
✔
✔ All except P, S
BC 10
✔
✔
✔
✔All
BC 20
✔
✔
✔
✔All
DSC5
✔
✔
✔
✔All
FMT10
✔
✔
✔
✔ S, P
FMT20AW ✔
✔
✔
✔ S, P
GU
10152535
All except P
PCU
10152535
All except P
PX2•PX2C6✔
✔
✔
✔ S, P
PXAE
✔
✔
✔
✔ S, P
PXLM
✔
✔
✔
✔S
SIT 3
✔
✔
✔
✔ S, P
✔
✔
✔
✔ S, P
SIT 5
✔
✔
✔
✔All
SW3
SWA
✔
✔
✔
✔All
VCH
✔
✔
✔
✔All
WMT05
✔
✔
✔
✔ S, P
WMT10
✔
✔
✔
✔ S, P
ZU
✔
✔
✔
✔ All except P
Accessories
• AMP: Kit for wall/ceiling mounting. Standard
on P and S versions.
BC 10 for vertical installation
BC 20 for horizontal installation
• GU: Aspiration grille, covers the front space
between the stands, does not interfere with
the air filter. Use with ZU stands compulsory.
• PCU: Rear cover panel.
• SIT 3-5: Thermostat interface cards. They
thermostat).
Air flow rate
Fans
 Sound pressure
Sound power
Water contents
Max. motor power
Max. input current
Coil connections
W (max.)
W (med.)
W (min.)
W (E)
l/h
kPa
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.) (E)
dB (A) (med.) (E)
dB (A) (min.) (E)
l
W (E)
A
ø
UL 11
2010
1460
1060
1150
173
1,6
840
650
490
700
530
390
144
1,9
180
120
80
1
37,5
28,5
22,5
46
37
31
0,4
18
0,09
1/2”
UL 16
2910
2120
1540
1700
250
3,7
1200
950
690
990
750
520
206
4,8
240
160
110
1
39,5
34,5
25,5
48
43
34
0,5
32
0,15
1/2”
UL 26
4620
3830
2890
2750
397
10,5
2030
1780
1420
1640
1370
1050
349
11
350
270
190
2
39,5
34,5
26,5
48
43
35
0,8
35
0,18
1/2”
UL 36
5940
4870
3530
3540
511
7,4
2830
2310
1730
2040
1790
1280
487
9,5
460
350
240
2
39,5
32,5
25,5
48
41
34
1,1
42
0,22
1/2”
Power supply = 230V ~ 50Hz.
volume V = 85m3 ; reverberation time t = 0.5s ; direction factor Q = 2;
distance r = 2.5m
Cooling:
- water inlet temperature 7°C ; max. speed
- Dt water 5°C
maximum speed
Heating:
- water inlet temperature 70 °C ; maximum speed
- Dt water 10 °C
maximum speed
Heating*:
- maximum speed
- water flow same as in cooling operation
Dimensions (mm)
PX2C6, PX2 panel in multiple 6-piece pack.
Main features
28
Mod Omnia
Height
Width
Depth
Weight
A
D
B
C
[kg]
UL 11
606
93
640
173
12,5
UL 16
606
93
750
173
13,5
UL 26
606
93
980
173
16,5
UL 36
606
93
1200
173
19,5
Cod.: SOULUY.14 / 1007
• Versions compatible with VMF System.
• Precharged electrostatic filter: Omnia fan
molecules present in the air to separate into
• Fan cleaning: Omnia fan coils allow fan blacoils have, as standard, precharged electropositive and negative ions. These ions neutrades to be easily cleaned. It is now possible to
static filters. These filters, thanks to their spelise the gas pollutant molecules, forming proremove the fan volute (it contains the fan blacial execution, attracts and retains all suspenducts that are normally present in clean air.
des) and clean it periodically.
ded dust particles, thus garanteeing pure
The result is in the air: you can finally breath
• Condensate drip tray cleaning: Thanks to a
breathable air to the whole family.
clean, odour-free ionised air.
new drip tray fitting, it is now easier to clean • P L A S M A C L U S T E R i o n i s i n g f i l t e r : • Silent operation: Thanks to the use of special
it with Omnia fan coils. This important soluPlasmacluster is capable of reducing the level
centrifugal fans, Omnia fan coils operation is
tion avoids, in the long run, bacteria, germs
of pollutants, by decomposing the molecules
extremely silent and offers the maximum
and mould to grow up, in the drip tray becauthat form them. Using a series of electric
acoustic comfort.
se of the air humidity.
shocks, "Plasmacluster" causes the water
29
Ventilcassaforma
Template for recessed installation of
fancoils in the wall
CHF
CHU L
VentilCassaforma has been designed to respond to the needs to rationalise spaces to suit modern interior
architecture.
VentilCassaforma is a galvanised template that makes it possible to make a space to house fan coils in the
wall. The template will make masonry work easier during the construction of a niche where the fan coil will
be installed. When the work is finished, the fan coil will be completely hidden from view.
VentilCassaforma is available in two versions with the same characteristics but designed to house fan coils
from two different series:
- CHU-L for fan coils in the Omnia UL-P series
- CHF for fan coils in the FCX-P , FCX-PV and FCXI-P series in 2 pipe systems, 2 pipe systems with resistance and with
4 pipe systems
Features
grey with rough glazed finish in order to
•Available in two versions for combined
hold the paint. The final colour can be
fan coils:
chosen by the client.
CHU-L: VentilCassaforma for the
OMNIA UL-P series. Available in four •Closure Panel: Made of galvanised steel,
this is the box housing the fan coil. The
sizes
box is recessed in the wall during builCHF: VentilCassaforma for FCX-P , FCX-PV
ding work making the construction of a
and FCXI-P fan coils. Available in 5 sizes
niche where the fan coils will be instal•Compatible with VMF System
led much easier. Holes for fitting the fan
•VentilCassaforma is made up of the folcoil and preparing an electric plant with
lowing parts to be assembled:
a socket and GEWISS fuse holder are
- Recess box;
already present on the back panel. The
- Closure panel;
box can accommodate the hydraulic
- Outer frame with deflector;
system pipes and condensation drain
- Cover bases, cross-members, covers.
pipes thanks to the presence of several
All parts are made of galvanised steel
easily-removable elements on the sides
and treated with epoxy-polyester resinand base.
based thermo-hardening base paint in
30
•Closure Panel: made of steel pre-treated
with base paint and no slots present.
Easily removable for servicing and cleaning the air filter.
•Outer Frame: the perimeter of the box
has an outer frame made of pre-treated
steel making it possible to cover the
perimeter part of the wall and hide any
imperfections that overtime show possible crumbling on the edge of the plaster
work.
•Deflector: manual, with which the flow
of air can be directed into the room. The
deflector is incorporated in the frame.
VentilCassaforma - Omnia UL combination
VentilCassaforma CHU L + Omnia UL combination
CHU 12 L
CHU 17 L
Omnia UL 11 P
Omnia UL 16 P
VentilCassaforma
Fan coil
VentilCassaforma
CHF 17
FCX 17 P
FCX 17 PV
Fan coil
CHU 27 L
Omnia UL 26 P
VentilCassaforma CHF + FCX P - FCX PV - FCXI P combination
CHF 22
CHF 32
CHF 42
FCX 22 P
FCX 32 P
FCX 42 P - 50 P
FCX 22 PV
FCX 32 PV
FCX 42 PV - 50 PV
FCX 24 P
FCX 34 P
FCX 44 P - 54 P
FCX 24 PV
FCX 34 PV
FCX 44 PV - 54 PV
FCXI 20 P
FCXI 30 P
FCXI 40 P - 50 P
CHU 37 L
Omnia UL 36 P
CHF 62
FCX 62 P - 82 P - 102 P
FCX 62 PV - 82 PV - 102 PV
FCX 64 P - 84 P
FCX 64 PV - 84 PV
FCXI 80 P
The fan coils FCX-P , FCX-PV and FCXI-P can be inserted into 2 pipe systems, 2 pipe systems with resistance and 4 pipe systems
Dimensions (mm)
CHU
Height
Width
Depth
A
A1
B
B1
C
12 L
691
648
692
644
186
17 L
691
648
802
754
186
27 L
691
648
1032
984
186
37 L
691
648
1252
1204
186
A
A1
B
B1
C
17
728
684
732
684
240
22
728
684
842
794
240
32
728
684
1073
1025
240
42
728
684
1293
1245
240
A
A1
A2
A3
B
B1
12 L
724
634
70
494
713
633
17 L
724
634
70
494
823
743
27 L
724
634
70
494
1053
973
37 L
724
634
70
494
1273
1193
A
A1
A2
A3
A4
B
B1
17
760
680
93
493
94
753
673
22
760
680
93
493
94
863
783
32
760
680
93
493
94
1094
1014
42
760
680
93
493
94
1314
1234
CHF
Height
Width
Depth
62
833
789
1414
1366
240
Outer frame and closure panel
Height
Width
CHF
Height
Width
62
865
785
93
598
94
1435
1355
A4
Cod.: SVC2UY.05 / 1201
CHU
31
Technical data
FCW
Mod.
W (max.)
Heating capacity
W (med.)
W (min.)
Heating capacity (water inlet 50°C)
W (E)
Water flow rate
l/h
Water pressure drop
kPa W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
Water flow rate
l/h
Water pressure drop
kPa (E)
m3/h (max.)
Air flow rate
m3/h (med.)
m3/h (min.)
Fans
n.
dB (A) (max.)
 Sound pressure
dB (A) (med.)
dB (A) (min.)
dB (A) (max.) (E)
Sound power
dB (A) (med.) (E)
dB (A) (min.) (E)
Water contents
l
Max. motor power
W (E)
Max. input current
A
Coil connections
ø
Fan coil with ioniser
Wall installation
TLW accessory
FCW 20
FCW 30
FCW 40
4800
6600
10200
4150
5900
8600
340050507000
3000
3800
6100
413
570
877
17,8
25
22
2100
2900
4600
1900
2700
4150
160025003700
1920
2240
3600
1470
2090
3100
120017002650
361
500
791
20,1
31,3
24
440540890
350440690
270370530
111
44,5
45,5
47,5
39,5
41,5
42,5
34,5
37,5
37,5
53
54
56
48
50
51
43
46
46
0,45
0,68
1,7
27
30
50
0,12
0,13
0,22
1/2”1/2”1/2”
(E) = EUROVENT certified performance
Features
• 3-speed cross flow fan
• Air outlet deflectors with horizontal
adjustment facility
• Motorized louver controllable from remote
handset for vertical adjustment of outlet air
flow direction
• Local control facility
• Microprocessor control
• Timer for hourly operation programming and
timer On LED
• Program for operation in automatic mode,
cooling, heating, ventilation and air ionising
• Automatic start after black-out
• Ioniser (air purification system by negative
ions). Only for FCW 20 and 30.
• Air filter can be easily removed and cleaned
Cooling:
- room air temperature 27 °C D.B., 19 °C W.B.;
- water inlet temperature 7 °C; maximum speed;
- Dt water 5 °C.
maximum speed.
Heating:
- room air temperature 20 °C;
- water inlet temperature 70 °C; maximum speed;
- Dt water 10 °C;
maximum speed.
Dimensions (mm)
Accessories
FCW 203040
TLW
✔
✔
✔
VCW 1
✔
✔
VCW 2
✔
VCW 1C
✔
✔
VCW 2C
✔
VCW 1V
✔
✔
VCW 2V
✔
Warning:
Note that condensation may form on the exterior of the unit if cold water circulates through the coil while the fan is off for prolonged periods of time,
so it is advisable to fit VCW.
32
FCW 20FCW 30FCW 40
Height
A270270320
Width
B
795
795
1200
Depth
C178178210
Weight
[kg]10,811,4 20
Cod.: SFCWUY.07 / 0603
• TLW: Infrared remote handset with LCD • VCW: Using this accessory it is possible to • VCWC: Kit consisting of Support Frame and
display for full control of all appliance funuse a three-way valve to intercept water flow.
Assembly Screws.
ctions. A series of machines can be controlled
The kit includes a three-way valve, connec- • VCWV: Kit consisting of one Three-Way Valve
by a single remote control unit.
tion pipes, and a support template.
and its Unions.
Technical data
FCW
Mod.
Fan coil
Wall installation
Accessory TLW1
W (max.)
W (med.)
W (min.)
W (max.) (E)
l/h
kPa
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
m3/h (max.)
m3/h (med.)
m3/h (min.)
n°.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.) (E)
dB (A) (med.) (E)
dB (A) (min.) (E)
l
W (E)
A
ø
Heating capacity
Th
r
ins ee-w
i
as de t ay v
sta he alv
nd uni e
ar t
d
Accessory PFW
Heating capacity (water inlet 50°C)
Water flow rate
Water pressure drop (max. speed)
Water flow rate
Water pressure drop (max. speed)
Air flow rate
Fans
 Sound pressure
Sound power
Water contents
Max. motor power
Max. input current
Coil connections
Aermec
program: FC / 2 / H
FCW 21
4000
3600
3000
2500
344
18,5
1900
1700
1450
1550
1350
1100
327
20
380
280
220
1
42,5
38,5
31
51
47
39,5
0,7
23
0,1
1/2” F
FCW 31
5200
4600
3950
3300
447
23
2700
2200
1850
2150
1700
1400
464
27
470
360
295
1
43
35,5
28,5
51,5
44
37
0,8
25
0,11
1/2” F
FCW 41
7600
6800
5700
4500
654
23
3800
3450
3000
2850
2500
2150
654
31,4
540
440
370
1
43,5
38,5
35,5
52
47
44
1,6
43,7
0,19
1/2” F
(E) = EUROVENT certified performance
Features
•Three-way valve incorporated inside
• Color PANTONE Cool Gray 1C
•IR remote control with support for wall
installation, the remote control can be used to
control all the unit's functions (TLW1
accessory)
•Remote wired command panel with liquid
crystal display makes it possible to control the
unit's main functions, wall installation, fourmetre cable (PFW accessory)
•Three-speed tangential ventilating assembly
• Maximum noiselessness
•Top-design appearance with rounded lines
• Air outlet deflectors with horizontal
adjustment facility
• Motor driven deflector fin that can be
worked from a remote control and a remote
panel for the vertical directioning of the output
air with five fixed positions and continuous
oscillation.
• Microprocessor control
• Timer for on/off programming
• Automatic cooling, heating, ventilation and
dehumidification function programming
• Sleep function only with TLW1 remote
control
• Automatic season change
• Automatic start after black-out
• Air filter can be easily removed and cleaned
• Full compliance with safety regulations.
Cooling:
• maximum speed:
- water inlet temperature 7 °C; Dt water 5 °C.
• medium and low speed:
- water inlet temperature 7 °C;
- water flow rate remains same as at maximum speed.
Heating:
room air temperature 20 °C B.S.;
• maximum speed:
- water inlet temperature 70 °C; Dt water 10 °C;
• medium and low speed:
• maximum speed (water inlet temperature 50 °C):
Dimensions (mm)
• TLW1 remote control (obligatory accessory):
- Accessory essential for the functioning of the
fan coil, an alternative to the PFW wired
remote command panel, it is not possible to
use the two remote control models at the same
time.
- Infrared ray type with liquid crystal display for
the control of all the functions of the unit, the
remote control is powered by two 1.5V mini
stick batteries of the R03 AAA type and works
optimally up to seven meters from the unit.
- It is supplied separately from the fan coil
because a single remote control can command
more than one fan coil.
- Using the remote control, you can set all the
functioning parameters of the device and they
34
are shown on a crystal liquid display, thereby
making programming easier.
- The remote control is fitted with a support so
it can be hung on the wall and it is therefore
possible to carry out the required operations
without removing it, it must be installed at a
point on the wall that is easy to reach and not
exposed to sources of heat, steam or direct
sunlight and that is at least a meter from
televisions or other electronic apparatus.
• PFW wired remote command panel
(obligatory accessory):
- Accessory essential for the functioning of the
fan coil, an alternative to the TLW1 remote
control, it is not possible to use the two remote
control models at the same time:
- The PFW can only control one fan coil.
- The panel must be installed on the wall and
connected to the fan coil with the four-meterlong cable supplied.
- Using the PFW, it is possible to set the main
unctioning parameters of the device, these
parameters are shown on a liquid crystal
display thereby making programming easier.
Height
Width
Depth
Weight
A
B
C
kg
FCW 21
298
880
180
9
FCW 31
305
990
180
10
Cod.: SFCW2UY.02/1104
Accessories
FCW 41
360
1170
210
19
35
Accessories
FCL
Compulsary GLL accessories,
Cassette type fancoil
Ceiling and false ceiling installation, cooling power from 1900 up to 11000W
Models:
FCL 32 , FCL36 , FCL42 , FCL62 - FCL72
FCL 34 , FCL38 , FCL44 , FCL64
Models:
FCL 82 , FCL102 , FCL122
FCL 84 , FCL104 , FCL124
FCL with accessory FCLMC
Aermec
the products are present on
the site
www .eurovent-certification.
com
• GLL10R (600x600)
GLL20R (840x840)
Delivery grille with louvers manually adjustable and air intake. With remote control, supplied with an infrared receiver with emergency operation switch. White RAL 9010.
• GLL10 (600x600)
GLL20 (840x840)
Delivery grille with louvers manually adjustable and air intake. Combined with wallmounted control panel. White RAL 9010.
GLL10 - GLL10M - GLL10R - GLL10N
White: RAL 9010
GLL20 - GLL20R - GLL20N
White: RAL 9010
FCLMC
White: RAL 9010
Remote Control included for GLL10M
GLL10R - GLL20R
• 4 configurations on one cassette-type fan coil:
- with MOTORISED louvers that can be oriented via the remote control (GLL10M only)
- with louvers that can be oriented manually, remote control
- with louvers that can be orientated manually, wall-mounted control panel
- With Manually adjustable fins, VMF System electronic thermostat,
wall-mounted control panel (VMF-E4), complete integration with the VMF System (only with GLL10N and GLL20N)
• Standard internal 3-way valve, with fast connection actuator and visual position signalling
• Version with 2-way valve for variable water flow rate systems
• Version without valves
• Heat exchange coil with shaped profile and enhanced surface
• Fan purposely designed for low sound emissions
• Versions for 2-pipe and 4-pipe systems
• also available with electric heater for heating
• 8 sizes for 2-pipe versions:
FCL 32-36-42-62-72-82-102-122
FCL 34-38-44-64-84-104-124
• Standard preparation with standard internal
three-way valve, with fast connection actuator and position visual signalling.
• FCL_V2 preparation (available upon request),
with internal two-way valve, suitable for
variable water flow rate systems.
• FCL_VL preparation (available upon request),
without internal valve.
• 3 configurations on one cassette-type fan coil:
- louvers that can be oriented by means of a
remote control and electronic control if coupled with the accessory GLL10M;
- with remote control, louvers that can be
oriented manually and by means of electronic control if coupled with the accessory
GLL10R or GLL20R;
- with louvers that can be oriented manually
if coupled with the accessory GLL10 or
GLL20, also requires a wired control panel
(accessory).
• GLL10N (600x600)
GLL20N (840x840)
Delivery grille with Manually adjustable fins
and air intake, with "VMF System" advanced
electronic thermostat. Individual units, or network master also requires a wired control
panel (VMF-E4 compulsory accessory). White
RAL 9010.
44
62
64
Mod. FCL
32
34
36
38
42
GLL10
✔
✔
✔
✔
✔
✔
✔
✔
✔
GLL10M**
✔
✔
✔
✔
✔
✔
✔
✔
✔
GLL10R**
✔
✔
✔
✔
✔
✔
✔
✔
✔
GLL10N**
✔
✔
✔
✔
✔
✔
✔
✔
✔
• High design aesthetics.
• Grille dimensions perfectly integrable in standard suspended ceiling panels of
600x600mm and 840x840mm for the most
powerful units.
• Fan designed for low sound emissions.
• 3-speed and 4-speed mixed flow (axial +
centrifugal) fan unit for larger sizes (FCL
42-44-62-64-72-82-84-102-104-122-124), in
order to select the 3 speeds that best meet
delivered power and quiet operation requirements.
• The load-bearing structure, reinforced with a
galvanised steel side band, contains insulation elements in expanded polystyrene obtained from injection moulding for purposes of
noise reduction and air routing (FCL 42-4462-72-64).
• Structure made entirely of galvanised steel,
containing insulation elements in closed cell
expanded polystyrene and externally covered
with anti-condensate felt (FCL 82-84-102104-122-124).
• Condensation drip tray in one piece, with V0
self-extinguishing level and overmoulding to
insulation in expanded polystyrene with
flame retardant additive.
• Heat exchanger with shaped profile to increase the exchange surface, and easily accessible drain valves.
• Continuous fan operation to prevent stratification of room air.
• Possibility of direct release of external air
regardless of indoor unit ventilation.
• Possibility to control the climate of adjacent
rooms as well. The versions FCL 82-84-102104-122-124 allow 3-direction delivery.
• Air filter easily removed and cleaned, selfsupporting structure, characterised by a high
efficiency and low pressure drops, with classV0 fire resistance (UL 94).
• Electrostatically pre-charged air filter regenerated with fire resistance class 2 (UL 900),
(FEL 10 accessory for GLL10, GLL10R,
GLL10M).
• Full compliance with safety regulations.
• Easy installation and maintenance.
SIT3 : commands the 3 fan speeds and must
the SIT5 card.
valves (four pipes systems); transmits the thermostat commands to the network of fan coils
fitted with SIT3.
• SW3 : Minimum water temperature probe, to
be used with electronic PXAE thermostats.
• SW4 : Minimum water temperature probe, to
be used with the units fitted with a grille with
remote control. Conpulsury with GLL_M,
GLL_R, GLL_N
• SWA : External SWA probe accessory for
FMT20AW panels. Detects the ambient air
temperature if connected to the connector (A);
the probe in the panel will be automatically
disabled. Detects the temperature of the water
in the system, for ventilation consent, if connected to the connector (W) (Length L = 6m)
• VHL1 - VHL20 : motor-driven three-way valve
for the heating battery in 4-pipe systems.
Obligatory accessory in 4-pipe systems.
• VHL2 - VHL22 : motor-driven two-way valve
for the heating battery in 4-pipe systems.
Obligatory accessory in 4-pipe systems with
variable flow rates.
82
84
102
104
122
124
GLL20
✔
✔
✔
✔
✔
✔
GLL20R**
✔
✔
✔
✔
✔
✔
GLL20N**
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
FCLMC10
72
✔
✔
✔
✔
✔
✔
✔
✔
✔
FEL10
✔
✔
✔
✔
✔
✔
✔
✔
✔
KFL
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
FCLMC20
KFL20***
KFLD
KFLD20***
Features
36
• GLL10M (600x600)
Delivery grille with adjustable louvers by
means of a remote control and air intake,
supplied with an infrared receiver with emergency operation switch.
White RAL 9010.
Accessories:
• FCLMC10
FCLMC20
is a perimeter case in galvanised and painted
sheet steel, which is used when the fan coil is
installed outside the suspended ceiling. It is
used for aesthetics and protection, therefore
the technical features of the FCL and FCLI
remain unvaried.
• FEL10 : electrostatically pre-charged air filter,
regenerated with fire resistance class 2 (UL
900).
• KFL : Delivery flange, allowing the air to be
directed to an adjacent room.
• KFL20 (***) : delivery flange, allowing the air
to be directed to an adjacent room. Up to
three KFL20 can be assembled on a single
unit.
• KFLD : suction flange, allows to introduce
external air directly into the room without
mixing.
• KFLD20 (***) : suction flange, allows to introduce external air directly into the room
without mixing. Up to two KFL20D can be
assembled on a single unit.
• RXLE - RXLE20 : electric heater for heating,
can be installed on the single-fan FCL units.
Requires GLL-M or GLL-R.
• SIT 3-5 : Thermostat Interface Cards. They
RXLE**
✔
✔
✔
✔
✔
RXLE20**
✔
✔
✔
SW3*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SW4**
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SWA*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
VHL1
✔
✔
✔
✔
✔
✔
✔
✔
VHL20
✔
VHL2
VHL22
✔
✔
✔
✔
✔
SIT 3*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SIT 5*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
FMT10*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
FMT20AW*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PX*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PX2*- PX2C6****
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PXAE*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
WMT10*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
VMF-E4*****
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
* Accessories that can only be used in combination with GLL10 and
GLL20 grilles.
** SW4 mandatory with GLL_M, GLL_R, GLL_N
*** A maximum of three KFL20 / KFL20D can be assembled on a single unit
**** PX2C6 = Multiple package of n°6 “PX2” control panels
***** Accessories that can only be used in combination with the GLL10N and GLL20N grilles for individual units or network master
37
Technical data
Mod. FCL
Heating capacity* 50°C (E)
Water flow rate* 50°C
Pressure drops* (VL) 50°C (E)
Total cooling capacity (E)
Sensible cooling capacity (E)
Water flow rate
Pressure drops (VL) (E)
Dimensions (mm)
Heat exchanger water content
W
l/h
kPa
W
W
l/h
kPa
m³/h
m³/h
m³/h
m³/h
n.
dB(A)
dB(A)
dB(A)
dB(A)
dB(A)
l
32
2380
327
9
1900
1520
327
10
600
410
300
1
46
37
29
26
1,2
36
3750
516
14
3000
2400
516
15
600
410
300
1
46
37
29
26
1,5
42
4950
679
23
3950
3160
679
25
700
530
360
260
1
53
44
37
29
26
1,5
62
6250
857
32
4980
3810
857
36
880
660
500
380
1
61
52
45
38
32
2,1
72
6750
939
38
5460
4100
939
43
900
680
520
400
1
63
54
47
40
34
2,1
82
7100
1032
23
6000
4200
1032
25
1100
830
680
460
1
50
41
36
34
30
3
102
10600
1548
25
9000
6660
1548
28
1350
1010
830
560
1
54
45
39
36
31
4,5
122
13000
1892
34
11000
8470
1892
38
1750
1350
1100
750
1
60
51
45
41
35
4,5
Water connections
ø Gas
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
W
A
A
2,5
45
0,22
0,66
2,5
45
0,22
0,66
2,5
75
0,33
0,99
2,5
83
0,37
1,11
2,5
93
0,4
1,2
4
150
0,70
2,10
4
155
0,69
2,07
4
175
0,75
2,25
Air flow rate (E)
Fans
Sound power (E)
Sound pressure
Kvs (standard version 3R valve)
Input power (E)
Input current
Starting current
2-pipe versions
vel. (max)
vel. (max)
vel. (max)
vel. (max.)
vel. (max.)
vel. (max.)
vel. (max.)
vel. 4
vel. 3
vel. 2
vel. 1 (min)
vel. (max.)
vel. 4
vel. 3
vel. 2
vel. 1 (min.)
(max.)
(max.)
FCL 32 - 34 - 36 - 38 - 42 - 44 - 62 - 64 - 72
FCL 32 V2 - 34 V2 - 36 V2 - 38 V2 - 42 V2 - 44 V2 - 62 V2 - 64 V2 - 72 V2
FCL 32 VL - 34 VL - 36 VL - 38 VL - 42 VL - 44 VL - 62 VL - 64 VL - 72 VL
GLL10N
GLL10N
Mod. FCL
Mod. FCL
Heating capacity 70°C (E)
Water flow rate 70°C
Pressure drops 70°C (VL) (E)
Sensible cooling capacity (E)
Water flow rate
Air flow rate (E)
Fans
Sound power (E)
Sound pressure
Heat exchanger water content (hot circuit)
Water connections
Water connections (hot circuit)
Kvs (hot circuit valve)
Input power (E)
Input current
Starting current
4-pipe versions
vel. (max)
vel. (max)
vel. (max)
vel. (max.)
vel. (max.)
vel. (max.)
vel. (max.)
vel. 4
vel. 3
vel. 2
vel. 1 (min)
n.
vel. (max.)
vel. 4
vel. 3
vel. 2
vel. 1 (min.)
l
l
ø Gas
ø Gas
(max.)
(max.)
W
l/h
kPa
W
W
l/h
kPa
m³/h
m³/h
m³/h
m³/h
dB(A)
dB(A)
dB(A)
dB(A)
dB(A)
W
A
A
34
2600
224
11
1900
1520
327
10
600
410
300
1
46
37
29
26
1,2
0,3
3/4”
1/2”
2,5
1,6
45
0,22
0,66
38
2600
224
11
2770
2240
476
13
600
410
300
1
46
37
29
26
1,5
0,5
3/4”
1/2”
2,5
1,6
45
0,22
0,66
44
3070
264
14
3650
2920
628
22
700
530
360
260
1
53
44
37
29
26
1,5
0,5
3/4”
1/2”
2,5
1,6
75
0,33
0,99
64
3800
327
21
4610
3530
793
31
880
660
500
380
1
61
52
45
38
32
2,1
0,6
3/4”
1/2”
2,5
1,6
83
0,37
1,11
84
8500
731
14
6000
4200
1032
25
1100
830
680
460
1
50
41
36
34
30
3
1,5
3/4”
1/2”
4
2,5
150
0,70
2,10
104
10000
860
19
7200
5300
1238
26
1350
1010
830
560
1
54
45
39
36
31
4,5
1,5
3/4”
1/2”
4
2,5
155
0,69
2,07
124
12500
1075
29
8800
6770
1514
38
1750
1350
1100
750
1
60
51
45
41
35
4,5
1,5
3/4”
1/2”
4
2,5
175
0,75
2,25
Weight
kg
32
20,5
34
21
36
20,5
38
21
42
20,5
44
21
62
22
64
22,5
72
22,5
kg
32 V2
20,5
34 V2
21
36 V2
20,5
38 V2
21
42 V2
20,5
44 V2
21
62 V2
21
64 V2
22,5
72 V2
22,5
kg
32 VL
20
34 VL
20,5
36 VL
20
38 VL
20,5
42 VL
20
44 VL
20,5
62 VL
21,5
64 VL
22
72 VL
22
Mod. FCL
Wheigt
Mod. FCL
Weight
FCL 82 - 84 - 102 - 104 - 122 - 124
FCL 82 V2 - 84 V2 - 102 V2 - 104 V2 - 122 V2 - 124 V2
FCL 82 VL - 84 VL - 102 VL - 104 VL - 122 VL - 124 VL
GLL20N
Cooling:
- room air temperature 27°C B.S. ; 19°C B.U.
- inlet water temperature 7°C ; maximum speed
Dt water 5°C
Heating
- room air temperature 20°C
- inlet water temperature 70°C ; Dt water 10°C
- maximum speed
- water flow rate as in cool mode
Heating *:
- oom air temperature 20°C
- inlet water temperature 50°C
- maximum speed
GLL20N
kg
82
35
84
36
102
36
104
36
122
36
124
36
kg
82 V2
35
84 V2
36
102 V2
36
104 V2
36
122 V2
36
124 V2
36
kg
32 VL
34
34 VL
35
102 VL
35
104 VL
35
122 VL
35
124 VL
35
Mod. FCL
Weight
Mod. FCL
Weight
Mod. FCL
Weight
Cod.: SFCLUY.08 / 1107
The performances are the same for all the configurations:
FCL (standard), FCL V2 and FCL VL.
FCLI
Brushless electric motor
Air temperature in the
air-conditioned room
Cassette-type fancoils with Brushless Inverter motor
Continuous 0-100% air flow rate regulation
Ceiling and false ceiling installation, cooling power from 1900 up to 11000W
Models:
FCLI32 , FCLI42 , FCLI62
Models:
Traditional fan coil with 3-speed motor
FCLI Inverter with Brushless motor
Set point
FCLI with accessory FCLMC
Aermec
Time (s)
GLLI10 - GLLI10N
White: RAL 9010
GLLI20 - GLLI20N
White: RAL 9010
The "brushless" electric motor is the result of combining
the most sophisticated technologies from the fields of
mechanics and electronics.
"Brushless" literally means "without brushes".
The brushless electric motor has no sliding contacts
between the rotor and the stator.
FCLMC
White: RAL 9010
In brushless motors, the rotor consists of permanent
magnets whose magnetic field interacts - without any
mechanical contact - with the stator windings. With the
special inverter device, it is possible to control the speed
and torque of the rotor continuously, just by means of
the stator currents.
Compared with the traditional alternate current motors,
the brushless motor offers huge advantages:
- Reduced wear and tear
- The possibility to adjust the rotation speed
accurately and continuously (0-100%)
The future is Inverter
FCLI is the Aermec range of cassette-type fan coils with continuous 0-100% air flow rate variation and therefore
continuous heating/cooling capacity variation.
Thanks to the Inverter technology, the FCLI continuously modifies the air flow rate, adapting it - moment by moment to the real needs in the room.
This produces considerable advantages in terms of electric savings, comfort and noise reduction compared with a
traditional on-off 3-speed fan coil.
• Vmf system with GLLI10N and GLLI20N grilles • ELECTRIC SAVINGS OF 50% COMPARED WITH A FAN COIL WITH TRADITIONAL
3-SPEED MOTOR
• VERY QUIET OPERATION
• TOTAL COMFORT: REDUCED TEMPERATURE AND HUMIDITY VARIATIONS IN
THE AIR-CONDITIONED ROOMS
• standard internal three-way valve, with fast connection actuator and position visual signalling
• Version with 2-way valve for variable water flow rate systems
• Version without valves
• Thermal exchange battery with shaped profile and enhanced surface
• Fan for low sound emissions
• Versions for systems with 2 and 4 pipes
Features
• Fan unit with Brushless motor (Continuous
0-100% speed variation);
FCLI 32-42-62-82-122
FCLI 34-44-64-124
• Standard preparation with standard internal
three-way valve, with fast connection actuator and visual signalling of the position
• FCLI_V2 preparation (available upon request),
with internal two-way valve, suitable for
variable water flow rate systems
• FCLI_VL preparation (available upon request),
without internal valve
• Requires matching with the obligatory accessories, grill and control panel, necessary for
the operation
40
• High design aesthetics
• Grille dimensions that can be perfectly incorporated into standard suspended ceiling
panel sizes (600x600 mm) and (840X840) for
more powerful units.
• Fan for low sound emissions
• EUROVENT certification
• The load-bearing structure, reinforced with a
galvanised steel side band, contains insulation elements in expanded polystyrene obtained from injection moulding for purposes of
noise reduction and air routing
• The condensation drip tray is in one piece,
with V0 self-extinguishing level and joined by
means of over-moulding technology to the
insulation in expanded polystyrene with
flame retardant additive
• Heat exchanger with shaped profile to increase the exchange surface, and easily accessible drain valves
• Possibility of direct release of external air
regardless of indoor unit ventilation
• Possibilità di condizionare anche locali attigui
• Air filter easily removed and cleaned, selfsupporting structure, characterised by a high
efficiency and low pressure drops, with a fire
resistance class V0 (UL 94)
• Electrostatically pre-charged air filter regenerated with fire resistance class 2 (UL 900),
(FEL 10 accessory)
standards
- Higher energy yields
- Longer life and greater reliability
These characteristics have made the brushless motor
irreplaceable in a wide variety of applications:
- robotics
- automotive
- precision drives
- CD/DVD players
- medical equipment
- etc.
Thanks to Aermec's FCLI range of inverter fan coils,
brushless technology can now make inroads in the field
of chilled water air conditioning, bringing notable
notevoli vantaggi di energy savings along with the
precise control of both air temperature and humidity in
the air-conditioned rooms
Accessories
Obligatory accessories,
• GLLI10 (600x600)
GLLI20 (840x840)
Delivery grille with louvers manually adjustable and air intake. Combined with wallmounted control panel. White RAL 9010.
• WMT20 : Control panel with electronic thermostat and LCD monitor.
Wall mounting.
• GLLI10N (600x600)
GLLI20N (840x840)
Delivery grille with Manually adjustable fins
and air intake, with "VMF System" advanced
electronic thermostat. Individual units, or network master also requires a wired control
panel (VMF-E4 compulsory accessory). White
RAL 9010.
Mod. FCLI
GLLI10
GLLI20
GLLI10N
GLLI20N
WMT20
FCLMC10
FCLMC20
FEL10
KFL
KFL20
KFLD
KFLD20
VHL1
VHL2
SWI
• VMF-E4 : Control panel “VMF System” with • KFL10
KFL20 : Delivery flange, allowing the air to
electronic thermostat and LCD monitor.
be directed to an adjacent room.
Wall-mounting
• KFLD
• Control panels and VMF System: the characteri- KFLD20 : suction flange, allows to introduce
external air directly into the room without
stics are described on the appropriate card.
mixing.
Accessories:
• VHL1 : motor-driven three-way valve for the
• FCLMC10
heating battery in 4-pipe systems. Obligatory
FCLMC20 is a perimeter case in galvanised
accessory in the 4-pipe systems.
and painted sheet steel, which is used when • VHL2 : motor-driven two-way valve for the
the fan coil is installed outside the suspended
heating battery in 4-pipe systems. Obligatory
ceiling. It is used for aesthetics and protecaccessory for 4-pipe systems with variable
tion, therefore the technical features of the
flow rates.
FCL and FCLI remain unvaried.
• SWI : Water temperature probe for WMT20
• FEL10 : electrostatically pre-charged air filter,
control panels. Cable length L = 2m.
regenerated with fire resistance class 2 (UL
900).
44
62
✔
✔
32
✔
34
✔
42
✔
64
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
82
122
124
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
41
Technical data
Mod. FCLI
Heating capacity 50°C (E)
Pressure drops (VL) 50°C (E)
Sensible cooling capacity (E)vel. (max)
Water flow rate
Air flow rate (E)
Fans
Sound power (E)
 Sound pressure
Water connections
Input power (E)
Input current
Mod. FCLI
Heating capacity 70°C
Water flow rate 70°C (E)
Pressure drops (VL) 70°C (E)
Sensible cooling capacity (E)vel. (max)
Water flow rate
Air flow rate (E)
Fans
Sound power (E)
 Sound pressure
Heat exchanger water content (hot circuit)
Water connections
Water connections (hot circuit)
Kvs (hot circuit valve)
Input power (E)
Input current
Dimensions (mm)
2-pipe versions
vel. (max)
vel. (max)
vel. (max)
W
vel. (max)
vel. (max)
vel. (max)
vel. (min)
vel. (max)
vel. (max)
vel. (min)
(max)
(max)
W
kPa
W
l/h
kPa
m³/h
m³/h
n.
dB(A)
dB(A)
dB(A)
l
ø Gas
W
A
4-pipe versions
vel. (max)
vel. (max)
W
vel. (max)
vel. (max)
vel. (max)
vel. (min)
vel. (max)
vel. (max)
vel. (min)
(max)
(max)
l/h
W
kPa
W
l/h
kPa
m³/h
m³/h
n.
dB(A)
dB(A)
dB(A)
l
l
ø Gas
ø Gas
W
A
32
2380
9
1900
1520
327
10
600
150
1
46
37
22
1,2
3/4”
2,5
33
0,28
42
4950
23
3950
3160
679
25
700
150
1
53
42
23
1,5
3/4”
2,5
55
0,43
34
2600
224
11
1900
1520
327
10
600
150
1
46
37
22
1,2
0,3
3/4”
1/2”
2,5
2,5
33
0,28
62
6250
16
4980
3815
857
36
880
150
1
61
52
24
2,1
3/4”
2,5
61
0,47
44
3070
264
14
3650
2920
628
22
700
150
1
53
42
23
1,5
0,5
3/4”
1/2”
2,5
2,5
55
0,43
82
7100
21
6000
4200
1032
25
1100
350
1
50
41
31
3
3/4”
4
80
0,71
64
3800
327
21
4610
3530
793
31
880
150
1
61
52
24
2,1
1,5
3/4”
1/2”
2,5
2,5
61
0,47
122
13000
34
11000
8470
1892
38
1750
350
1
60
51
31
4,5
3/4”
4
90
0,8
124
12500
1075
29
8800
6770
1514
38
1750
350
1
60
51
31
4,5
4,5
3/4”
1/2”
4
2,5
90
0,8
FCLI 32 - 34 - 42 - 44 - 62 - 64
FCLI 32 V2 - 34 V2 - 42 V2 - 44 V2 - 62 V2 - 64 V2
FCLI 32 VL - 34 VL - 42 VL - 44 VL - 62 VL - 64 VL
GLLI 10
GLLI 10N
GLLI 10
GLLI 10N
Mod. FCLI
Weight
kg
32
20,5
34
21
42
20,5
44
21
62
22
64
22,5
Mod. FCLI
Weight
kg
32 V2
20,5
34 V2
21
42 V2
20,5
44 V2
21
62 V2
21
64 V2
22,5
Mod. FCLI
Weight
kg
32 VL
20
34 VL
20,5
42 VL
20
44 VL
20,5
62 VL
21,5
64 VL
22
FCLI 82 - 122 - 124
FCLI 82 V2 - 122 V2 - 124 V2
FCLI 82 VL - 122 VL - 124 VL
FCLI
The performances are the same for all the configurations:
FCLI (standard), FCLI V2 and FCLI VL.
42
GLLI
20
GLLI20
GLLI 20N
Heating
- room air temperature 20°C
- inlet water temperature 70°C ; Dt water 10°C
- maximum speed
GLLI
20
GLLI20
GLLI 20N
Mod. FCLI
Weight
kg
82
35
122
36
124
36
Mod. FCLI
Weight
kg
82 V2
35
122 V2
36
124 V2
36
Mod. FCLI
Weight
kg
32 VL
34
122 VL
35
124 VL
35
Cod.: SFCLIUY.04/ 1104
Cooling:
- room air temperature 27°C B.S. ; 19°C B.U.
- inlet water temperature 7°C ; maximum speed
Dt water 5°C
43
Accessories
FHX
Ge
rm
inc icida
orp l l
ora am
ted p
Fan coils
With germicidal lamp
Aermec
program: FC / 2 / H
• BV: Single row hot water coil.
• GA: Intake louver with fixed slats.
• GAF: Intake louver with fixed slats and filter.
• GM: Delivery louver with adjustable slats.
• PA: Intake Plenum made of galvanized steel
sheet, provided with Intake Connections for
Circular Section Ducts.
• PA-F: Intake plenum that allows to have the
intake and the delivery on the same side, suitable for all the installations where it is requested to put the appliance outside the air-conditioned rooms in order to reduce to the
minimum the noise and facilitate the maintenance operations.
• PC: Rear cover panel. Conveniently covers
exposed rear fancoil sections. The panel is
required by current safety standards for units
installed away from the room wall.
• PM: Delivery plenum in galvanized steel with
external insulation, with plastic outlet connections for circular section ducting.
• RD: Delivery straight duct connection.
• RDA: Intake straight duct connection.
• RP: Delivery 90° duct connection.
• RPA: Intake 90° duct connection.
SIT 3-5: Thermostat interface cards. They
thermostat).
• SW: Probe for the electronic thermostats
which permits operation of the unit only with
water above 35 °C.
• VCF: The SW3 probe must be combined to
this accessory.
Kit complete with copper connections and 3
way valves all or nothing type, to be powered by
a 230 V ~ 50Hz, 24 V ~ 50Hz voltage supply.
* Attention: The VCF valve and the drip tray
BC4 can be installed at the same time as the
fan coil.
• VCFD: The SW3 probe must be combined to
this accessory.
Kit complete with copper connections and 2
way valves all or nothing type, to be powered by
a 230 V ~ 50Hz, 24 V ~ 50Hz voltage supply.
* Attention: The VCFD valve and the drip tray
BC4 can be installed at the same time as the
fan coil.
• ZX: Feet for built-in installation.
FHX-UVP
FHX-UVPO
Accessories
FHX-UV
BC
BV
The FHX fan coil is fitted with an exclusive
device for air sterilization, making it
essential in environments that require the
highest levels of hygiene, such as:
• hospitals
• dentists' surgeries
• doctors' and vets' surgeries
• analysis laboratories
• pharmaceutical companies
• waiting rooms
• beauty institutes
• homes
• offices
• public premises
GA
GAF
GM
Features
FHX-UV: universal free-standing or wall/ceiling mounting.
FHX-UVP: wall-mounted model without
cabinet.
FHX-UVPO: wall-mounted model without
cabinet, with boosted motor at 7 speeds (3
selectable).
• EUROVENT certification.
• Compatible with VMF System.
• Exclusive air sterilization system with germicidal lamps. Efficiency of 99.999% in the deactivation of all microorganism Gram - and
Gram +
• 3 row coil.
• 3-speed ventilating unit.
standards.
• Rounded line.
• Quiet operation.
• Low loss of charge in the heat exchange batteries.
• Electric motors with permanently inserted
condensers.
• Ease of installation and maintenance.
• Air filter easy to remove and clean.
• Control made by a microprocessor thermostat
supplied as an accessory:
- FHX-UVP and UVPO: requires external control panel (PXAE accessory).
- FHX-UV: The control panel may be fitted on
board the unit (PXAI accessory) or externally
(PXAE accessory).
• FHX-UV: Metal protection cabinet with varnishing in anticorrosion polyester, colour
RAL9002.
• FHX-UV: The air delivery and suction louvers
are made of plastic material, colour RAL7044
• Adjustable air delivery louver on version UV
except models 62 and 82.
PA
PA
PC
PM
PXAE
4
5
6
8*
9*
122
132
142
162
22
32
42
62
22
32
42
62
22
32
42
62
22
32
42
62
22F
32F
42F
62F
23
33
43
62
22
32
42
62
22
32
42
Size (FHX)
50
62
82
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Accessories
Versions
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UVP-UVPO
UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UV
UV
UV
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UV-UVP-UVPO
PXAI
RD
RDA
RP
RPA
SE**
22
32
42
62
22
32
42
62
22
32
42
62
22
32
42
62
20X
30X
40X
80X
SIT3
SIT5
SW3
41
42
43
VCF
4124
4224
4324
1
2
3
VCFD
124
224
324
ZX
7
8
22
32
42
Size (FHX)
50
62
82
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Versions
UV
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UV-UVP-UVPO
UVP-UVPO
UVP-UVPO
(*) BC8 and BC9 are not applicable to fan coils with cover cabinets
(**) SE accessories are matched with ZX feet
44
45
Dimensions (mm)
Technical data
Mod.
Water content
W (max.)
W (med.)
W (min.)
W (E)
l/h
kPa
W (max.) (E)
W (med.)
W (min.)
W (max.) (E)
W (med.)
W (min.)
l/h
kPa (E)
m3/h (max.)
m3/h (med.)
m3/h (min.)
n.
dB (A) (max.)
dB (A) (med.)
dB (A) (min.)
dB (A) (max.) (E)
dB (A) (med.) (E)
dB (A) (min.) (E)
l
Total input power
W
Total input current
A
Battery connections 3R
Battery connections 1R (BV)
ø
ø
Heating capacity
Heating capacity (inlet water 50°C)
Water capacity
Sensitive cooling capacity
Water capacity
Air capacity
Number of fans
 Sound pressure
Sound power
(FHX-UV / UVP)
(FHX-UVPO)
(FHX-UV / UVP)
(FHX-UVPO)
FHX 22
3400
2700
1915
2100
292
6,3
1500
1330
1055
1240
1055
755
258
5,8
290
220
140
1
41,5
34,5
22,5
50
43
31
0,79
50
79
0,24
0,37
1/2”
1/2”
Electrical power supply = 230V ~ 50Hz
FHX 32
4975
4085
3380
3160
427
14,2
2210
2055
1570
1750
1540
1100
380
16,6
450
350
260
2
39,5
32,5
25,5
48
41
34
1,11
69
122
0,33
0,57
1/2”
1/2”
FHX 42
7400
6415
5115
4240
636
14,1
3400
2800
2310
2760
2115
1635
585
14,3
600
460
330
2
42,5
35,5
28,5
51
44
37
1,48
82
136
0,4
0,63
3/4”
1/2”
FHX 50
8620
7530
5420
4900
741
14,2
4190
3640
2840
3000
2750
2040
721
19,3
720
600
400
2
47,5
42,5
33,5
56
51
42
1,48
92
107
0,47
0,48
3/4”
1/2”
FHX 62
12920
10940
8330
6460
1110
14,8
4860
4660
3950
3980
3510
2825
836
11,6
920
720
520
3
48,5
42,5
33,5
57
51
42
2,52
182
197
0,84
0,92
3/4”
1/2”
FHX 82
15140
13350
10770
7990
1300
19,8
7420
5500
4710
5680
4250
3450
1276
13,5
1140
930
700
3
53,5
48,5
41,5
62
57
50
2,52
206
235
0,93
1,06
3/4”
1/2”
FHX 22 UV - 32 UV - 42 UV - 50 UV
Mod. FHX
Height
Width
Weight
D
E
[kg]
32 UV
520
980
26
42 UV
520
1200
25
50 UV
520
1200
25
62 UV
590
1320
35
82 UV
590
1320
35
(E) = Performance EUROVENT certification
The performance refers to the following conditions:
Cooling:
• maximum speed:
- water inlet temperature 7°C ; Dt water 5°C
- water inlet temperature 7°C
- water flow rate same as at maximum speed
FHX 22 - 32 - 42 - 50 UVP
FHX 22 - 32 - 42 - 50 UVPO
Mod. FHX
Weight
A
B
C
[kg]
22 UVP/UVPO
572
522
440
16
FHX 62 - 82 UVP
FHX 62 - 82 UVPO
32 UVP/UVPO
823
753
671
26
42 UVP/UVPO
1043
973
891
25
50 UVP/UVPO
1043
973
891
25
62 UVP/UVPO
1205
1122
1102
35
82 UVP/UVPO
1205
1122
1102
35
Cod.: SFHXUY.03 / 0912
Heating:
• maximum speed:
- water inlet temperature 70°C; Dt water 10°C
- water flow rate same as at maximum speed
• maximum speed (water inlet 50°C):
- water flow rate same as in cooling operation
22 UV
520
750
16
FHX 62 UV - 82 UV
46
47
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
49
✔
✔
✔
✔
✔
✔
4-pipe system
VC+VF
SW3**
SIT
SIT3
SIT5
2-pipe system with
electric heater
RX
RX + VF
SW3**
SIT
SIT3
SIT5
Cod.: SPCUY.04 / 1102
✔
✔
✔
✔
✔
✔
✔
✔
✔
Symbols
* = Air temperature sensor selected by remote control
** = Water temperature sensor
*** = Air temperature sensor
VC = Hot water valve
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Configurations 2-pipe system
2-pipe system Without valve
VCF
SW**
SA***
SIT
SIT3
SIT5
✔
✔
Installation
Wall installation
On board installation
Recessed installation (503)
IR remote control
VF = Cold water valve
VCF = Hot and cold water valve
RX = Electric heater
(503) = Recessed 503 module
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔6m
✔6m
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔6m
✔2,3m
✔2,5m
✔
✔2,3m
✔
✔2,3m
✔2,5m
✔
✔2,3m
✔2,5m
✔
Standard equipment
Internal air sensor
External air sensor
Water sensor
✔
✔
✔
✔
✔
✔*
✔*
✔
✔*
✔*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Important: Before choosing a control panel make sure it is
compatible with the fan coil model and its accessories.
Some control panels offer more functions than the standard
configuration; consult the manual for information on all the
functions available
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
WMT05
FMT20
FMT10
PTI
PXBI
PXAR
PXAI
• PTI: Control panel with electronic room temperature thermostat to be mounted directly on
the fan coil (for FCX AS, B, U and UA).
Mounting on the fan coil.
• PX: Control panel with switch.
Wall installation.
• PX2: Control panel with switch. Wall installation or mounted directly on the fan coil (for
FCX AS, B, U and UA).
• PX2C6: The control panel PX2C6 is provided
only in multiple packages of 6 parts, sealed
individually. Wall installation.
• TF1: Room temperature thermostat with
switch. Wall installation.
• WMT05: Electronic thermostat for fan coils
installed in 2-pipe systems. The panel is electrically protected by an internal fuse.
Thermostatically controlled ventilation, no
control valve, wall installation.
• WMT06: Electronic thermostat for fan coils
installed in 2-pipe or 4-pipe systems. The
panel is electrically protected by an internal
fuse.control of the thermostat valve, continuous ventilation, wall installation.
• WMT10: Electromechanical thermostat for
fan coils installed in 4-pipe and 2-pipe
systems and in 2-pipe systems with electric
heater; can be connected to two On/Off valves for closing coil water supply. The panel is
electrically protected by an internal fuse.
Continuous or thermostated ventilation.
Wall installation.
✔
KTLM
WMT06
WMT10
48
• PCT2: Control panel with electromechanical
thermostat for 2-pipe systems with thermostated ventilation. Not for use with FCA-R.
Wall installation.
• PXBI: Simplified control panel with electronic
room temperature thermostat.
Mounted directly on the fan coil (for FCX AS,
B, U and UA).
• PXAE: Electronic thermostat for fan coils
installed in 2-pipe or 4-pipe systems.
Simplified controls with only 2 selectors for
adjusting temperature and fan speed (3
speeds, manual or automatic control). Can
control 2 On/Off valves. Continuous or thermostated ventilation. Wall installation.
• PXAI: Electronic thermostat for fan coils
installed in 2-pipe or 4-pipe systems.
Simplified controls with only 2 selectors for
adjusting temperature and fan speed (3
speeds, manual or automatic control). Can
control 2 On/Off valves. Water temperature
sensor included. Continuous or thermostated
ventilation. Mounted directly on the fan coil
(for FCX AS, B, U and UA).
• PXAR: Electronic thermostat for fan coils
installed in 2-pipe systems, 2-pipe systems
with electric heater or 4-pipe systems
(without electric heater). Simplified controls
with only 2 selectors for adjusting temperature and fan speed (3 speeds, manual or automatic control). The electric heater is controlled by the fan speed control. Can control the
heater and one On/Off valve or, alternatively,
2 On/Off valves. Continuous or thermostated
ventilation. Water temperature sensor included. Wall installation or mounted directly on
the fan coil (for FCX AS, B, U and UA).
PXAE
Control panels
• FMT10: Electronic thermostat for fan coils
installed in 4-pipe and 2-pipe systems and in
2-pipe systems with electric heater, can be
connected to two On/Off valves for closing
coil water supply. Simplified controls with
only 2 selectors for adjusting temperature and
fan speed (3 speeds). External air sensor (supplied with sensor holder) to be placed inside
the fan coil.
Recessed installation.
• FMT20AW: Electronic thermostat with LCD
for fan coils installed in 4-pipe systems,
2-pipe systems and systems with 2-pipes with
resistance, with the possibility of connecting
two On - Off type valves for the cut-off of the
coil supply water. Probe for air temperature
inside the panel. A room air temperature
probe can be connected (SWA accessory). A
probe for the temperature of the water in the
system can be connected (SWA accessory).
Recess installation.
• KTLM: Thermostat kit, including an IR remote
control, an IR receiver, an electronic control
board with air temperature sensor, a connecting cable, brackets and all the necessary
mounting fittings. KTLM can be applied to fan
coils installed in 2-pipe systems with or
without water valves or in 4-pipe systems with
water valves. For use with FCX fan coils with
cabinet.
• KTLP: Thermostat kit, including an IR remote
control, an IR receiver, an electronic control
board with air temperature sensor, a connecting cable, brackets and all the necessary
mounting fittings. KTLP can be applied to fan
coils installed in 2-pipe systems with or
without water valves or in 4-pipe systems with
water valves. For use with FCX fan coils
without cabinet.
✔
FMT20AW
PX2C6
PX2
✔
WMT10
✔
✔
✔
✔
PX
TF1
FMT10
KTLP
WMT05
WMT06
✔
✔
PXBI
Features
Electronic thermostat
Electromechanical thermostat
Switch
KTLM
✔
✔
PCT2
PTI
✔
PXAR
Change over
Automatic
Manual
PXAI
PX2
PXAE
Control panels
for fan coils
PX2C6
Control panels
nEW!
System components
VMF
Variable Multi Flow system
Range of components for the management of air conditioning,
heating and domestic hot water systems
Accessory module
VMF systems central interface
Zone interface
VMF-E4D
VMF-E4
VMF-VOC
VMF-E5N / VMF-E5B
VMF-CRP
*As awared by Chicago Athenaeum:
Museum of the Architecture and Design
Zone interface
Thermostat with serial communication
VMF-E0
VMF-E2
VMF-E2H
Domestic water panel
VMF-E1 / VMF-E18
VMF-SW / VMF-SW1
• VMF-E0: thermostat accessory to fix on the
side of the fancoil, equipped with air and
water sensors as standard, controls 2 pipes, 4
pipes,
2 pipes + Plasmacluster, 2 pipes + UV lamps,
2 pipes + Electric heater systems. Equipped
with external contact to be used as low voltage remote ON-OFF. This thermostat can create a single fancoil zone through 2-wire serial
communication (1 master + 5 slaves maximum). The thermostat is fuse protected.
• VMF-E1: like VMF-E0 with extra:
- Economy contact/presence sensor.
- Auxiliary water sensor for general control in
4-tube systems (with VMF-SW1 accessory).
- Serial RS485, protocol ModBus RTU, for centralised control.
- Possibility to insert expansion cards for future
development. The VMF-E1 accessory must
therefore be used in the Masters in the presence of multiple zones, or for communication with the chiller/heat pump.
• VMF-E18: the same as the VMF-E1, but for
fancoils with inverter motors.
• VMF-E2: this is the user interface on the
machine to match to the VMF-E0, VMF-E1
and E18 accessories for the series UL-S-FCXAS, FCX-U (sizes 62-64-82-84-102) FCX180U
FHX-U (sizes 62-82). Equipped with 2 selector switches, one for temperature and one for
speed control.
• VMF-E2H: this is the User Interface (as above)
on the machine, to match to the VMF-E0, E1,
accessories dedicated to the HL series
• VMF-E4: this is the wall mounted user interface, to match to the VMF-E0, VMF-E1 and
VMF-E18 accessories for the UL, HL, and
FCX series without on-board control.
Innovative design, extremely slim and inexpensive, allows control of functions via a
capacitive touch keypad with LCD display.
The environment can be adjusted with the
sensor on the panel (standard), or the sensor
of the fancoil which it is connected to, or by
their arithmetic mean. It also allows the activatio n o f th e air p u r ifier acces s o r y
(Plasmacluster / UV Lamp) and the electrical
heating element.
• VMF-E4D:is the variant of the previous code,
but with frontal gray Pantone 425C (METAL)
• VMF-E5B: white recessed panel, with backlit
graphic LCD and capacitive keyboard allows
the centralised command/control of a complete hydronic system consisting of Fancoils:
up to 64 fancoil zones consisting of a master
+ 5 slaves. Chiller/heat pump equipped with
Modu_Control, GR3 and pCO2/PCO³ controls (accessory required for RS 485 interface
with MODU-485A, AER485, AER485P2 /
AER485P1); circulators: up to 12 configurable
zone circulators; boiler: boiler consensus
management for hot water production; heat
recovery units: consents up to 3 per programmable recovery units based on the timing
and/or by measuring the air quality obtained
with the VMF-VOC accessory; domestic water
module: complete management of the domestic hot water production through the control
of: diverting/circulator valve, integrated resistor, accumulation temperature sensor, antilegionella circuit.
• VMF-E5N: this is the variant of the previous
code, but with black plastic.
• VMF-VOC : accessories for measuring air
quality (see related point in the description of
the VMF-E5B).
• VMF-CRP: accessory module for the control
of the boilers, pumps and heat recovery units.
• VMF-SW: water sensor may be used in place
of the standard supplied with VMF-E0, VMFE1 and VMF-E18 thermostats for the installation upstream of the valve.
• VMF-SW1: additional water sensor may be
used for 4-pipe systems with VMF-E1 and E18
thermostats for the maximum control in the
cold range.
• VMF-ACS3KM: electrical panel for the complete command/control for hot water storage
(3-way control valve, integrated single phase
3kW resistor command, Anti-legionella and
temperature sensor).
• VMF-ACS3KTN: electrical panel for the complete command/control for hot water storage
(3-way control valve, integrated three-phase
(3-way control valve, integrated three phase
(3-way control valve, integrated three phase
• GLL_N: FCL_N grid units, equipped with thermostat card for serial communication with
the accessory functions equivalent and VMFE1 (this grid is a mandatory accessory for the
units FCL N);
• GLLI_N: FCLI_N grid units, equipped with
thermostat card for serial communication
with the accessory functions equivalent and
VMF-E18, (this grid is a mandatory accessory
for the units FCLI N);
VMF-ACS
Dimensions (mm)
* Winner for the International design Award "Good Design 2010" for the "Electronics"
Features
• VMF: Variable Multi Flow system.
Management and control system of hydronic
systems for the conditioning, heating and production of domestic hot water.
The VMF system allows complete control of
every component of a hydronic system both
locally and centrally and, communicating
between the various components of the
system, manages the performance without
ever neglecting the end user's request of
comfort, but reaching it as efficiently as possible with energy saving.
If you add the advantages deriving from such
an innovative control to the flexibility of a
hidronic system, you get a more efficient and
effective alternative to the variable refrigerant
flow systems (VRF).
The VMF system is extremely flexible, enough
to allow various control and manage steps,
expandable at different moments:
50
1)Control of a single fancoil.
2)Control of a microzone (one MASTER fancoil
and a maximum of 5 SLAVE fancoils).
3)Control of multi independent zones system
(one MASTER fancoil and a maximum of 5
SLAVE fancoils for each zone).
4)Control of a fancoil system, plus management
of the heat pump (if compatible with the VMF
system).
5)Control of a fancoil system, heat pump and
management of the domestic hot water
system (VMF-ACS).
6)Control of a fancoil system, heat pump,
domestic hot water production and additional
circulators (up to a maximum of 12 using
three additional VMF-CRP modules).
7) Control of a fancoil system, heat pump,
domestic hot water production, additional
circulators and management of heat recovery
units, maximum 3, (with the ability to handle
up to 3 VMF-VOC sensors) or a boiler.
• The VMF system can operate and manage,
through a VMF-E5N / VMF-E5B panel, a
maximum of 64 zones consisting of a
MASTER fancoil and a maximum of 5 SLAVE
fancoils connected to each MASTER, for a
total of 384 fancoils.
• Besides the central control supplied by
theVMF-E5N / VMF-E5B panel, the MASTER
fancoils must be provided with a local control interface; this interface can be mounted
on the fancoil (VMF-E2 / VMF-E2H) or be
mounted into a wall panel (VMF-E4).
• Different functions can be controlled through
the VMF-E5N / VMF-E5B panel, including:
- Identify the different zones setting a name for
each one.
- Check and set the ON-OFF function and the
set temperature of each zone.
- Set and manage the set temperature of the
heat pump.
- Scheduling time slots.
• Simple installation of the fancoil system
through the SELF-MONITORING function of
the MASTER fancoils.
VMF-E5B / VMF-E5N
VMF-E4 / VMF-E4D
VMF-ACS
VMF-VOC
A BC
[mm] [mm][mm]
138
110
45
125
80
11
354 544135
79 8126
VMF-E5B / VMF-E5N
VMF-E4 / VMF-E4D
VMF-ACS
VMF-VOC
51
Selection 1 • Compatibility of thermostats for serial communication and control interface for MASTER units
Example of system components
Models
Versions
Notes VMF-E0
VMF-E1
VMF-E18
VMF-E2
VMF-E2H VMF-E4/E4D GLL N
GLLI N
AS - UA - B
✔
✔
-
✔
-
✔
-FCX
U(7)
✔
✔
-
✔
-
✔
-
P - PPC - PO - PV ✔
✔---✔
-
AS -
-
✔
✔
-
✔
-
FCXIU
(7) -
-
✔
✔
-
✔
-
P
(2)-
-
✔
-
-
✔
-
S - SM
✔
✔- -✔
✔
-
HL
N
(1)
--- ----S
✔
✔- -
-
✔
-
UL
P ✔
✔- -
-
✔
-
UV
(7) ✔
✔-✔
-
✔
-
FHX
UVP - UVPO
✔
✔
-
-
-
✔
-
VEC ✔
✔- -
-
✔
-
FCL
(8)
-----✔
✔(8)
-----✔-✔
FCLI
✔---✔
-
VED
✔
VMF-CRP
• A maximum number of 4 VMF-CRP modules
VOC
n°1
can be installed and each n°1
one can
perform seven°2
ral tasks based on the type of setting:
- Control 4 pumps
VOC
-n°3
Control 3
heat recovery n°3
units and
n°4
n°4 3 VOC senVMF-CRP
sors (in this case the correct number of VMFVOC accessories must be purchased)
VOC
- Control a boiler
n°1
n°2
• The only requirement to install VMF-CRP
modules is the presence of a VMF-E5 centralised
control
VMF-CRP
n°1
n°2
Notes
VMF-E5N / VMF-E5B
(2)
✔
(2)
✔
(2)
✔
(2)
✔
(1)
-
(2) ✔VMF-E5
(2)
✔
(2)
✔
(2)
✔
(2)
✔
(2)
✔
(2)
✔
n°3
n°4
n°2
n°3
n°4
VOC
VOC
VOC
x3
n°3
n°4
n°1
n°2
n°3
n°4
VOC
Selection 4:
x3
VOC
VOC
VMF-ACS
x3
VMF-ACS
Selection 3:
• The VMF-ACS accessory allows to control the
different components needed to produce domestic hot water; for detailed information on the
types of systems manageable by VMF-ACS, refer
to technical documentation of the accessory
Selection 2 • Compatibility of VMF-E5 7 VMF-E5B centralised control
Models
Versions
AS - U - UA - B
FCX
P - PPC - PO - PV
FCXI
AS - U - P
S - SM
HL
N
S
UL
P
FHX
UV - UVP - UVPO
VEC
FCL
FCLI
VED
n°2
n°1
VMF-ACS
VMF-E5
Chiller
Chiller
Selection 2:
VMF-E5
Chiller
MODbus RS485
(MAX 1000m)
MODbus RS485
Selection 3 • Compatibility of heat pumps with electrical panel for domestic hot water management
52
B
A
Fancoil 1 (Slave)
A
Fancoil 2 (Slave)
A
Fancoil 3 (Slave)
A
Fancoil 4 (Slave)
A
Fancoil 5 (max) (Slave)
B
Fancoil 64 (max)
A (MASTER)
B
VMF-E4
Fancoil 64 (max)
A (MASTER)
Selection 1:
Fancoil 1 (Slave)
A
A
Fancoil 1 (Slave)
A
Fancoil 1
A (MASTER)
B
Fancoil 1 (Slave) A
A
Fancoil 1Fancoil
(Slave)3 (Slave)
A
A
Fancoil 2 (Slave)
A
Fancoil
1 Fancoil
(Slave) 3 (Slave)
A
A
A
A
Fancoil 2Fancoil
(Slave)4 (Slave)
Fancoil 3 (Slave)
A
A
Fancoil
2 Fancoil
(Slave) 4 (Slave)
A
A
A
Fancoil 3Fancoil
(Slave)5 (max) (Slave)
Fancoil 4 (Slave)
A
A
Fancoil
3Fancoil
(Slave) 5 (max) (Slave)
A
A
Fancoil 4 (Slave)
A
Fancoil 4 (Slave)
A
Fancoil 2 (Slave)
A
B
Fancoil 64 (max)
A (MASTER)
A
Fancoil 2 (Slave)
A
A
B
Thermostat for serial connection VMF-E0 / VMF-E1 / VMF-E18
A
B
Cod.: SVMFUY.05 / 1111
Notes:
The versions with the accessories hanging MA or MP, can be treated equally to their respective versions FCX AS U FCX, FCX AU;
(1) This version includes the thermostat E0-VMF and VMF-E2H command interface already installed, these features make these models suitable for operation as a single
unit or function of the MASTER microzone plants (plants consist of a single zone, without centralized contol VMF-E5N / VMF-E5B);
(2) To be compatible with the centralized control of VMF-E5N / VMF-E5B, a fan must be set as MASTER of the area, therefore this must be equipped with the thermostat for
serial communications, or VMF VMF-E1-E18 and combined with a user interface ( VMF-E2, or VMF VMF-E2H-E4), or units FCL / FCLI equipped with a thermostat on the
grid GLL_N / GLLI_N, combined with a command interface VMF-E4 / VMF-E4D ;
(3) The heat pumps with integrated storage are not suitable for production of hot water;
(4) To know the maximum temperature of hot water production (plant and / or health) refer to the limits on the operating unit technical manual;
(5) All types of systems that provide centralized control of VMF-E5N / VMF-E5B, are compatible with the accessory modules (maximum 4) VMF-CRP, and each module can
function as a pump controller (4 for each accessory module) or boiler control and recovery (with ON / OFF control and management of 3 recovery boiler in addition to
3 accessories VMF-VOC);
(6) The compatibility of the probe VMF-VOC is only related to the presence of the accessory module in the system with VMF-CRP control function recovery;
(7) VMF-E2: Only for size FCX62U-64U-82U -84U-102U, FCXI80U, FHX62UV-82UV.
(8) units must be included in boxes FCLI GLLI_N mandatory accessory grid, this grid is equipped with a card thermostat same rights as VMF-E18 models.
FCL cassette units must provide the mandatory accessory GLL_N grid, this grid is equipped with a card equivalent and thermostat models VMF-E1. To use one of these
drives as MASTER is necessary to provide the command interface VMF-E4;
(9) Accessory units required for the combination of VED with thermostats or VMF VMF-E0-E1. Using a VMF-SIT3 for each unit;
VMF-E4
Fancoil 1
A (MASTER)
ModBus TTL
VMF-CRPVMF-VOCVMF-SIT3
✔
✔ (6)
✔
Fancoil 1
A (MASTER)
B
ModBus TTL
Notes
(5) (6)
(9)
VMF-E4
VMF-E4
MAX 30m (ModBus TTL)
Models Versions
VMF-E5N/ E5D
All
VEDAll
VMF-E4
Selection 4 • Compatibility of modules and additional sensors
VMF-E4
MODbus RS485
(MAX 1000m)
ModBus TTL
(MAX 1000m)
Notes
VMF-ACS3KMVMF-ACS3KTVMF-ACS6KTVMF-ACS8KT
(3) (4)
✔
✔
✔
✔
(4)
✔
✔
✔
✔
(4)
✔
✔
✔
✔
(3) (4)
✔
✔
✔
✔
(3) (4)
✔
✔
✔
✔
(4)
✔
✔
✔
✔
(4)
✔
✔
✔
✔
(3) (4)
✔
✔
✔
✔
(3) (4)
✔
✔
✔
✔
(4)
✔
✔
✔
✔
Models
Versions
ANL
H
ANLITutte
ANKTutte
ANR
H
H
ANF
SRATutte
SRP-V1Tutte
NRL
H
NRC
H
WSHTutte
Commands interface for MASTER unit VMF-E2 / VMF-E2H / VMF-E4
B
53
Versions
Climafon
• Available in four sizes.
• Available versions with fixed grille, manual
fin or motorised fin. For the last version, in
order to avoid the creation of an electrical
system, the unit is controlled by a normal 9V
battery (life of up to three years of operation
before replacement is necessary).
• The versions available are single coil (2 rows
of pipes), double (4 rows of pipes) or treble (6
rows of pipes).
Thermoconvectors
Vertical installation residential use
Treble
coil
Double
coil
Single
coil
Selection
By combining the various options, each model can be configured.
With fixed grille
(Version G)
With Manual Blade
(Version M)
With Automatic Blade
(Version A)
Code:
CLIMAFON
Size :
1, 2, 3, 4
Coil :
1 - Single
2 - Double
3 - Treble
Grille:
G - With fixed grille
M - With manual blade
A - With motorised blade
Commercial code example: CLIMAFON 23M
This is the Climafon unit, size 2 with treble coil and manual blade.
Features
• Enhanced Comfort: CLIMAFON heats rooms
content. This enables it to be very fast in heapleted. Costly masonry work typical of radiaquickly and naturally because it basis its opeting times and permits it to be used only
tor installation is avoided: just four blocks are
ration on air moved by simple convection.
where it is useful. The speed it takes
required for fixing CLIMAFON to the wall.
The use of CLIMAFON with low temperature
CLIMAFON to reach full capacity operation • Electronic regulation: CLIMAFON, in its
heating systems (heat pump, condensation
has been checked by TÜV (world leader in
complete version, has a built in thermostat
boiler, geothermal and solar...) ensures that
product assessment and verification).
with temperature that can be regulated by the
the rooms are heated without drying the air. • Greater security: CLIMAFON's outer surface
user. The thermostat controls an interior
It causes a pleasant sensation of well-being
reaches a top temperature of 43°C, a value
motor that opens and closes the deflector
that helps to survive even the longest and
that is totally harmless for our body (the risk
interrupting the supply of heat. This system is
harshest winters in total relaxation.
of burning is nil). Its rounded form without
powered by a normal 9 volt battery (a life of
• Best quality of the air we breath: the air temsharp edges makes the room a safer enviup to three years operation before replaceperature of the air leaving CLIMAFON is such
ronment especially for children.
ment is necessary) that makes CLIMAFON
as not to allow the toasting of the powder in • Greater care to appearance: the soft flowing,
completely autonomous without the need for
the environment. The result is healthy, clean
modern and elegant lines give CLIMAFON
connection to the mains.
air. In addition to our health, winners also
greater appeal that enables it to be integrated
include the walls of our house (CLIMAFON
with all types of furnishing whether it is tradispells the end to the blackening of walls typitional or modern.
cal of radiator systems).
• Easier and faster installation: CLIMAFON is
• Energy saving: the innovative finned exchanmuch lighter than a radiator with the same
ger ensures high energy efficiency thanks the
capacity; just one person is needed to handle
possibility of effective use at low temperatuand install it quickly and easily on all types of
res of the warm supply water.
wall. CLIMAFON is fitted with an installation
• Operation at full capacity achieved more
template that means the unit can be assemquickly: CLIMAFON has much smaller water
bled after the building work has been com-
54
Technical data
Mod. Climafon
Heating capacity
Water flow rate
Water pressure drop
Water contents
Coil connections
Rows of pipes
W
l/h
kPa
l
ø
ø
11
700
60
0,18
0,4
1/2”
1
12
910
78
0,22
0,5
1/2”
2
13
1005
87
0,26
0,6
1/2”
3
21
1010
87
0,24
0,5
1/2”
1
22
1350
116
0,50
0,8
1/2”
2
23
1540
135
0,72
1,1
1/2”
3
31
1400
120
0,35
0,6
1/2”
1
32
1750
150
0,95
1,0
1/2”
2
33
2001
176
1,36
1,4
1/2”
3
41
1810
156
0,52
0,7
1/2”
1
42
2205
190
1,31
1,1
1/2”
2
43
2515
221
1,91
1,6
1/2”
3
13
675
600
140
12,5
21
675
800
140
14,2
22
675
800
140
14,9
23
675
800
140
15,6
31
675
1000
140
17,1
32
675
1000
140
18
33
675
1000
140
18,7
41
675
1200
140
19,9
42
675
1200
140
21
43
675
1200
140
21,9
Heating (in accordance with UNI EN 442):
- water inlet temperature 75-65 °C; Dt water 50 °C.
Dimensions (mm)
Mod Climafon
Height
Width
Depth
Weight
A
B
C
[kg]
11
675
600
140
11,6
12
675
600
140
12,1
55
Cod.: SCFONUY.00 / 0503
Aermec presents the brand new natural convection heating system in the CLIMAFON system.
CLIMAFON is born from long experience in the heat exchange field gained within the Giordano Riello International Group, a group in which
Aermec is the leading company.
CLIMAFON is a system terminal that works on the basis of natural convection: the air is heated through an exclusive finned exchange and is sent into
the room through a flue effect.
NEW
Climabox
Recessed wall-mounted convection heater
Technical data
Mod.
Thermal power
Water flow rate
Water pressure drop
Water content
Battery connectors
CBX 22
1220
105
0,5
0,8
W
l/h
kPa
l
ø gas
CBX 23
1330
114
0,72
1,1
CBX 32
1610
138
0,95
1
CBX 33
1755
151
1,36
1,4
CBX 42
2005
172
1,31
1,1
CBX 43
2180
187
1,91
1,6
1/2" Female
Data in compliance with standard uni EN 442
Climabox is the innovative built-in wall convection radiator for heating systems. It was created to meet the
needs for space rationalization according to modern architecture criteria for interiors and the current need
for energy saving.
Characteristics
The Climabox convection heater
is the ideal terminal for heating
any room. Heat is supplied
instantly and uniformly distributed throughout the area.
It can be added to a heating
system powered by a boiler,
district heating system or heat
pump. The possibility of easily
removing the cover allows for
thorough cleaning of the interior.
Ease of installation with reversable water attachments in the
installation phase. Full compliance with safety and injury
prevention regulations
Head
closing
panel
Frame in
galvanized plate
Heat exchange
battery
CHF
Height
Width
Any model can be configured by changing the available options.
56
Dimensions (mm)
The closing panel and all of the visible
parts of the frame are treated so they
can be painted with the same paint as
the wall.
Unit choice
Logo:
CLIMABOX
Size:
2, 3, 4
75 °C
65 °C
20 °C (ΔT0=50 °C)
Battery:
2 - Double
3 - Triple
Grille:
Fixed grille
Exchanger width
A
A
mm
mm
22
155
884
23
155
884
32
155
1084
33
155
1084
42
155
1284
43
155
1284
mm
625
625
825
825
1025
1025
Cod.: SCBXUY.01 / 1203
•Available in 3 sizes with double or triple battery.
•Climabox consists of several parts to
be assembled:
1. Frame in galvanized and painted
plate that allows the heat exchanger to be installed in the wall.
2. H e a t
e x c h a n g e r
, designed for maximum intensification of the natural convection
effect, constructed of copper
piping and finning.
3. C l o s i n g
p a n e l
supplied, which allows the materials, desired look and colour of
the panel to be customized. Once
the work is complete, the heating
unit will be completely hidden
from view.
4. Head
Located on the upper horizontal
part of the panel, it is available
with a fixed metallic grille.
HEATING
Water input temperature
Water output temperature
room temperature 57
NEW
VED
•
•
•
•
•
•
•
•
•
•
•
•
Air handling terminal with cooling capacities from 8 to 18 kW
For ducted systems
WIDE RANGE OF ACCESSORIES
HORIZONTAL AND VERTICAL INSTALLATION
COMPATIBLE WITH THE VMF SYSTEM
VERSIONS FOR 2/4 PIPE SYSTEMS
HEAT EXCHANGER ONLY WITH 1 OR 2 ROWS
WIDE RANGE OF USEFUL STATIC PRESSURE
5 SPEED VENTILATION UNIT
CENTRIFUGAL FANS IN ANTISTATIC PLASTIC
INSPECTIONABLE FAN UNIT
INTERNAL ISOLATION WITH CLASS 1 FIREPROOF PROTECTION
CLASS G3 AIR FILTER
COIL REVERSIBILITY
Choosing the unit
By appropriately combining the options available, it is possible to select the model that satisfies the specific system requirements.
Fields configurator:
123
❘
4
❘
Size
5
❘
Main coil
n°. rows
6
❘
Heating only coil
n°. rows
Code
123
❘
VED
4
❘
5
5
❘
3
6
❘
2
(VED532 = unit size 5, with Main Coil 3 Rows and Heating Coil 2 Rows)
Features
• Air handling terminal for ducted systems
• EUROVENT FCP Certification Program
• Horizontal and vertical installation
• Indoor installation
• Available in 4 sizes and 4 configurations
• Versions for 2 pipe systems with 3 or 4 row
coil
• Versions for systems with 4 pipes with main
coil with 3 or 4 rows and heating only coil
with 1 or 2 rows
• Reversibility of the hydraulic connection in
the installation phase
• Low pressure drop in the heat exchange coils
• 3-way valves accessories
• 2-way valves accessories for systems with
58
variable water flow rate
• 5 speed fan unit (3 selectable)
• Wide range of useful static pressure
• Centrifugal fans in antistatic plastic. Due to
their features, they allow to reduce the energy
consumption with respect to normal fans
• Fans with wing-shaped profile studied to
obtain high flow rate and static pressure performance and low noise emission at the same
time
• Compatible with the VMF system
• Wide range of controls
• Wide range of accessories to satisfy all system
requirements
• Rectangular flow flange already integrated
into the framework
• Class G3 air filter with easy extraction and
cleaning
• Internal insulation in Class 1 fire resistance
• IP20 protection rating
• Plastic augers, extractable for easy and
efficient cleaning
• Full respect of the accident-prevention
standards
Accessories
• RDA_V: Straight fitting with rectangular
flange for ducting.
In galvanised sheet steel
• RPA_V: Intake plenum with rectangular
flange for ducting.
In galvanised sheet steel
•PA_V: Intake plenum with circular flanges for
ducting.
In galvanised sheet steel, the flanges are in
plastic
• RPM_V: Flow plenum with rectangular flange
for ducting.
In galvanised sheet steel, internally isolated.
• PM_V: Flow plenum with circular flanges for
ducting
In galvanised sheet steel, internally isolated,
the flanges are in plastic
• KFV: Circular flange kit for intake/flow
plenum.
In plastic
•VCF4_C: Kit made up from motorised 3-way
valves with isolating shell, fittings and
isolated copper pipes. For main coils.
230V~50 Hz power supply
• VCF4_H: Kit made up from motorised 3-way
valves, fittings and isolated copper pipes. For
heating only coils. 230V~50 Hz power
supply
• VCF2_C: Kit made up from motorised 2-way
valves, with fittings and isolated copper
pipes. For main coils. 230V~50 Hz power
supply
•VCF2_H: Kit made up from motorised 2-way
valves, with fittings and copper pipes.
For heating only coils. 230V~50 Hz power
supply
coupled to thermostats different to the VMF
System
• SIT5: Thermostat interface board.
Allows to realise a network of VED units
(max 3) controlled by a centralised PXAE
panel
• SW3: Water minimum temperature probe to
use with PXAE control panel.
VARIABLE MULTI FLOW SYSTEM
VMF System: The complete fittings of the VMF
System management system are described in
the dedicated sheet.
CONTROL PANELS
Some VMF components require coupling with
The complete features of the control panels are
other accessories, consult the relative
described in the dedicated sheet.
documentation.
Some control panels require coupling with • VMF-SIT 3 : Thermostat Interface Board
other accessories, consult the relative VMF. Mandatory accessory on the VED unit
documentation.
supplied with VMF-E0 / E1 thermostat.
ACCESSORIES TO COUPLE WITH THE
CONTROL PANELS
• SIT3 : Thermostat interface board
Mandatory accessory on the VED units
Accessories compatibility
Mod. VED 430432440441530532540541630632640641730 732740 741
RDA 450 V
✔
✔
✔
✔
✔
✔
✔
✔
RDA 670 V✔
✔
✔
✔
✔
✔
✔
✔
RPA 450 V
✔
✔
✔
✔
✔
✔
✔
✔
RPA 670 V✔
✔
✔
✔
✔
✔
✔
✔
PA 450 V
✔
✔
✔
✔
✔
✔
✔
✔
PA 670 V✔
✔
✔
✔
✔
✔
✔
✔
RPM 450 V
✔
✔
✔
✔
✔
✔
✔
✔
RPM 670 V✔
✔
✔
✔
✔
✔
✔
✔
PM 450 V
✔
✔
✔
✔
✔
✔
✔
✔
PM 670 V✔
✔
✔
✔
✔
✔
✔
✔
KFV
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SW3
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SIT 3*
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SIT 5**
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PXAE
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
WMT05
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
WMT06
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
WMT10
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
VCF45C
✔
✔
✔
✔
✔
✔
✔
✔
VCF45H
✔✔
✔
✔
VCF47C
✔
✔
✔
✔
✔
VCF47H
✔✔
VCF25C
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
VCF25H
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
VMF-SIT3***
VMF-E0
VMF-E1
VMF-SW
VMF-SW1
VMF-E4
VMF-E5B
VMF-E5N
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
* SIT3 ** SIT5 *** VMF-SIT3 ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
=Mandatory accessory on the VED units coupled to thermostats different to the VMF System
= Allows to realise a network of VED units (max 3) controlled by a centralised PXAE panel
= Mandatory accessory for coupling with VMF-E0 or VMF-E1
59
440
737
Ø16
Dimensional data (mm)
Cooling (Eurovent):
- Inlet air temperature D.B. = 27°C
- Inlet air temperature W.B. = 19°C
- Water inlet temperature = 7°C
- Outlet water temperature = 12°C
- Water flow rate depending on the Dtw constant
60
141
10
=
1053
20
300
256
15
=
130
25
1104
1109
1158
1133
440
737
248
287
45
109
241
198
Ø16
141
403
362
313
275
1104
1109
VED: 630 - 632 - 640 - 641 - 730 - 732 - 740 - 741
40
20
1558
1533
1453
40
351
307
15
150
25
10
280
316
46
109
789
440
Ø16
423
379
247
287
326
1504
1509
- The nominal speed represents the upper limit of the air flow rate for
which the heat exchanger has been dimensioned
Heating 50°C (Eurovent):
- Water flow rate as in the cooling test
Code : SVEDUY.00 / 1101
(E) : Certificate Data in compliance with the Eurovent FCP Program
- Electric power supply: 230V~50Hz
- Class G3 air filter installed
VED: 430 - 432 - 440 - 441 - 530 - 532 - 540 - 541
329
Mod. VED
430432440441530532540541630632640641730732740 741
W (nominal)
-13875- 8990 -15020- 9510 -22800-14800-25080-15800
Heating Capacity
70°C
W (max.) (E)
-12090- 8160 -13540- 8850 -20500-13750-22180-14500
(heating only coil
circuit)
W (med.) (E)
-10725- 7480 -12850- 8520 -17750-12370-19720-13330
W (min.) (E)
- 8280 - 6190 -10720- 7475 -14690-10770-16730-11830
l/h (nominal)
-1193- 773 -1292- 818 -1961-1273-2157- 1359
Water flow rate 70°C
l/h (max.)
-1040- 702 -1164- 761 -1763-1183-1907- 1247
(heating only coil
circuit)
l/h (med.)
- 922 - 643 -1105- 733 -1527-1064-1696- 1146
l/h (min.)
-712-532-922-643-1263-926-1439-1017
kPa (nominal)
-22-32-25-35-33-31-39- 34
70°C water
kPa (max.) (E)
-17-27-21-31-27-27-31- 30
pressure drop
kPa (med.) (E)
-14-23-19-29-21-23-25- 26
(heating only coil circuit)
kPa (min.) (E)
- 9 -17-14-23-15-18-19- 21
W (nominal) 10420-11950-11340-13110-18220-19600-20060-21820 W (max.) (E)
9475 -10740-10420-11820-16070-17930-17280-19150 Heating
capacity
50°C
W (med.) (E)
8250 - 9130 - 9775 -11050-13500-14940-15120-16680 W (min.) (E)
6195-6810-8190-9170-11100-11980-12640-13840 kPa (nominal)
17-24-19-29-57-37-69-43 50°C water
kPa (max.) (E)
13-19-16-23-48-32-57-35 pressure drop
kPa (med.) (E)
11-15-15-21-36-24-44-28 (main coil circuit)
kPa (min.) (E)
7 - 9 -11-16-26-17-33-21 W (nominal)
8010 8010 9290 9290 8660 8660 10280102801390013900164501645015360153601810018100
W (max.) (E)
6950695080108010776077608970897012530
12530
15180
15180
13850
13850
1608016080
W (med.) (E)
6150615070607060739573958545854510700
10700
12760
12760
12200
12200
1423014230
W (min.) (E)
468546855340534061606160743574358890 889010430
10430
10400
10400
1196011960
W (nominal)
6225622566756675675567557255725511500
11500
11590
11590
12770
12770
1280012800
W (max.) (E)
5360536057355735602060206450645010300 10300
10660
10660
11440
11440
1132011320
W (med.) (E)
471547155040504057155715613061308750875089108910999099909970 9970
W (min.) (E)
354535453785378547204720504050407220722072407240848084808340 8340
l/h (nominal)
137813781598159814901490176817682391239128292829264226423113 3113
Water flow rate
l/h (max.)
119511951378137813351335154315432155215526112611238223832766 2766
(cooling)
l/h (med.)
105810581214121412721272147014701840184021952195209820982448 2448
l/h (min.)
806 806 918 918 10601060127912791529152917941794178917892057 2057
kPa (nominal)
222230302626373758584747707056 56
Water head loss
kPa (max.) (E)
171722222121282848484141585845 45
(cooling)
kPa (med.) (E)
131317171919252536363030464637 37
kPa (min.) (E)
8 8 10101313191926262121353527 27
3/h (nominal) 152015201520152017001700170017002450245024502450280028002800 2800
m
3/h (max.) (E) 135012501340125015201460150014602210211022002110241023502380 2350
m
Air flow rate
3/h (med.) (E) 113010601100106014001360138013601800173017701730204020002020 2000
m
3/h (min.) (E)
m
790 750 780 750 11201060110010601380134013701340164016001620 1600
Pa (nominal)
554050404030353068536353473742 37
Useful static pressure
Pa (max.) (E)
727070705856565675757575696969 69
(with filter installed)
Pa (med.) (E)
505050505050505050505050505050 50
Pa (min.) (E)
242524253232323230303030323232 32
(nominale)
V5V5V5V5V5V5V5V5V5V5V5V5V5V5V5 V5
Motor speed(max.)
(E)
connections(med.)
(E)
(min.)
(E)
W (nominal)
238242240242283281282281376376376376411411411 411
W (max.) (E)
228215222215270265267265339339339339371371371 371
Input power
W (med.) (E)
182175178175232229230229268268268268285285285 285
W (min.) (E)
137130135130175269172169224224224224234234234 234
Maximum input power
W
290290290290300300300300436436436436440440440 440
Maximum input current
A
1,4 1,4 1,4 1,4 1,351,351,351,352,072,072,072,072,002,002,00 2,00
Protection rating
IP20IP20IP20IP20IP20IP20IP20IP20IP20IP20IP20IP20IP20IP20IP20 IP20
Number of fans n°
222222223333333 3
Coil connections
(main)
ø Gas (Female) 3/4”3/4”3/4”3/4”3/4”3/4”3/4”3/4”3/4”3/4”3/4”3/4”3/4”3/4”3/4” 3/4”
Coil connections
(heating only)ø Gas (Female)
-1/2”-1/2”-1/2”-1/2”-1/2”-1/2”-1/2”- 1/2”
Net Weight kg
4145,54345,54145,54345,557 63 60 63 57 63 60 63
Gross Weight kg
4448,54648,54448,54648,572 78 75 78 72 78 75 78
174
Technical data
403
362
313
275
Heating 70°C (Eurovent):
- Outlet water temperature = 60°C
- Water flow rate depending on the Dtw constant
61
Technical data
TS
Air handling units with cooling capacity from 4.85 up to 24.8 kW
TSMX
TS
TSBA
TSPM
Characteristics
• Compact unit for horizontal installation
• Structure made of Aluzink sheet steel and
internally covered with sheets of polyethylene
and polyester to obtain improved thermal and
acoustic insulation
• Condensate drip tray in stainless steel AISI
304 with insulation
• Coils with aluminium fins and copper pipes
• Statically and dynamically balanced centrifu-
gal fans
• Wide range of accessories to meet varying
• Three-speed electrical motor with running
needs (class G3 air filter, post-heating coils,
capacitor permanently activated and internal
plenum suction assembly, mixer section, sucthermal protection
tion grille, delivery flanges with circular
• Transmission system relay card for each speed
outlets or rectangular outlet)
(excluding the models TS13 and TS16)
• Useful static pressure available for any canalisation
• Large choice of distance commands
TS 13 TS 16 TS 23 TS 34 TS 36 TS 43 TS 46 TS 53 TS 56 TS 63 TS 74 TS 76
Model
kW 4.855.80 7.9 9.6 10.511.113.313.916.516.621.924.8
Cooling
capacity
kW 3.754.45 6.4 7.6 8.3 8.9510.7 9.8 11.713.117.820.1
Sensible
cooling capacity side pressure drop
kPa 21 9 24241623173227262826
Water
flow rate
l/h
830 10001360165018101910229023902840286037704270
Water
kW 9.80 12.5815.5019.7021.5221.6027.4925.9032.8935.5046.3052.06
Heating
capacity side pressure drop kPa 12 8 17201317132121202321
Water
flow rate
l/h
840 10801330169018501860236022302830305039804480
Water
3/h 930 930 1500160016002050205024002400360042004200
m
Nominal
air flow rate
static pressure (1)
Pa 90 5510085 45115801057012011575
Useful
filter pressure drop (2) Pa 131311121213131111162525
TSFA
n°. 363463636346
Coil
rows
Ø”
G 3/4" G 1" G 3/4" G 3/4" G 1" G 3/4" G 1" G 3/4" G 1"
G 1"
G 1" G 1¼"
Coil
water connections
Maximum
water temperature °C 120120120120120120120120120120120120
Maximum
operating pressure bar 151515151515151515151515
n°. 112222222222
Fans
n°. 333333333333
Ventilation
speed number
n°. 111111111111
Motors
maximum power
W
90 90 147147147184184184184420600600
Motor
A
1 1 1,91,91,92,62,62,62,63,95,55,5
Maximum
input current
dB(A)
50
50
51
52
52
55
55
55
55
58
58
58
Sound
pressure level
(1) rated capacity (maximum speed) without air filter;
(2) air filter (TSFA accessory) at rated capacity;
Cooling:
- Internal air temperature 27 °C B.S. ; 19 °C B.U.
- Water inlet temperature 7 °C ;
- ∆t = 5 °C
Heating:
- Internal air temperature 20 °C
- Water inlet temperature 70 °C
- ∆t = 10 °C
Choice of Unit
By suitably combining the numerous options available, it is possible to configure each model in such a way as to meet the most particular of system
requirements.
Code:
Models
Field configurer:
TS
1 2
3
4
available:
|||
Size:
Code| |
TS 13
1, 2, 3, 4, 5, 6, 7
|Size|
TS 16
Coil:
|
|
Row coil
TS 23
3 - 3-row coil
|||
TS 34
TS
1 2 3 4 5 6 7 3 4 6
4 - 4-row coil
TS 36
TS 43
6 - 6-row coil
TS 46
TS 53
TS 56
TS 63
TS 74
TS 76
Example of the commercial code: TS34
This is a TS unit, size 3, with 4-row coil.
Accessories
• TSBA: 2-row coil for post-heating, contained in
which the TSGA grille can be applied
connected to the connector (W) of the
a delivery installation plenum
• TSPM: Delivery plenum to be connected to the
FMT20AW panel. Two SWA probes can be
• TSFA: Class G3 air filter
circular channels (with 2, 3 or 4 circular, 200
connected simultaneously to the FMT20AW
• TSFM: Delivery flange with rectangular section
mm flanges).
panel.
• TSGA: Horizontal suction grille with fixed fins • SWA: External probe accessory SWA (length L = • Control panels:the characteristics of the control
to produce suction from below together with
6m). It detects the temperature of the room air if
panels are described on the appropriate card.
the TSPA accessory
connected to the connector (A) of the
• TSMX: Section that mixes the recirculating air
and the external air. Calibration of the mix via
probe, incorporated in the panel, is automatithe damper, motorisation is possible
cally disabled. It detects the temperature of the
• TSPA: Plenum with suction from below, to
water in the system for ventilation consent if
TSPA
TSMX
TSFA
TS
TSRD
TSRS
TSBA
TSFM
TS TSBAx TSFAx TSFMx TSGAxTSMXx TSPAx TSPMxFMT10 PXAE WMTSWA**
10 10101010101010 05
20/30 20/3020/3020/4020/3020/3020/3020AW
10
40 4040 404040
50 5050
50/60/70
505050
60/70 60/7060/70 60/7060/7060/70
✔*
✔*
✔*
✔*
✔*
✔*
✔*
✔
✔
✔
✔(x 1-2)
13 - 16
✔*
✔*
✔*
✔*
✔*
✔*
✔
✔
✔
✔(x 1-2)
23 ✔*
✔*
✔*
✔*
✔*
✔*
✔*
✔*
✔
✔
✔
✔(x 1-2)
34 - 36
✔*
✔*
✔*
✔*
✔*
✔*
✔*
✔
✔
✔
✔(x 1-2)
43 - 46
✔*
✔*
✔*
✔*
✔*
✔*
✔*
✔
✔
✔
✔(x 1-2)
53 - 56
✔*
✔*
✔*
✔*
✔*
✔*
✔
✔
✔
✔(x 1-2)
63 ✔*
✔*
✔*
✔*
✔*
✔*
✔*
✔*
✔
✔
✔
✔(x 1-2)
74 - 76
* = The code of these accessories is obtained by substituting the letter “x” with the number indicating the corresponding size of the unit
** = SWA accessories are matched with FMT20AW control panels.
Dimensions (mm)
TSPM
AIR
AIR
Cod.: STS1UY.02 / 0909
TSGA
TS13TS16TS23TS34TS36TS43TS46TS53TS56TS63TS74TS76
Height (A) [mm]296296296296296325325325325375375375
Width (B) [mm]
645
645
1000
1000
1000
1100
1100
1345
1345
1345
1345
1345
Depth (C) [mm]520520520520520600600600600600600600
Weight [kg]252735384242464852566167,5
AIR
62
63
Choice of Unit
TDA
requirements.
Code:
Field configurer:
TDA
Size:
1 2 3
4 6
6
|||
09, 15, 21, 28, 37
Code |Version
Version:
|
3 - 3-row water coil
Size
4 - 4-row water coil
E - 2-row direct expansion coil
X -Extractor (without coil)
Air handling units
Air flow rate from 800 to 3,500 cu.m/h
Technical data
Mod. TDA
Nominal air flow rate
Useful static pressure (1)
•Horizontal or vertical INSTALLATION
•Version with 3-4 row water-type coil •Version with 2-row direct expansion coil
•Version with extractor
Cooling capacity with 4-row coil (2)
Characteristics
•Structure with hot galvanised steel sandwich
panels, 15mm thick, with interposed
polyurethane foam (density 40kg/m3). The
delivery and suction panels are equipped with
flanges for the collets to any air channels and
can be moved to create different air flow
configurations. The horizontal or vertical fixing
to the walls of the unit is made possible by the
appropriate brackets.
• New centrifugal fans with high head levels,
double suction, forward blades and directly
coupled motor. The single-phase 230V-50Hz
motor is multi-speed (of which three speeds can
be selected).
• Condensated collection basin in galvanised
steel, suitable for both vertical and horizontal
installation.
• Coils with 3 rows, that can be fed with hot or
refrigerated water. Made of copper pipes with
aluminium finning held in place by the
mechanical expansion of the pipes. They are
equipped with threaded sleeves for the
plumbing connections and the air breather
valve. The coils can be rotated on site.
• A 2-row, direct expansion coil is also
available. It is made of copper pipes with
aluminium finning held in place by the
mechanical expansion of the pipes.
• GA Suction grille
With tilted fins fixed at 45°; can be installed
directly on the device (by removing the flange)
or on the wall.
• CMA Outer casing for grille
• BP One-row water-type post-heating coil
applied outside the unit
Contained in a special, thermally-insulated housing, it is installed on the air delivery flange
only and consists of a 1-row turbo-type coil.
• BR Electric post-heating coil applied outside
the unit
The machines can be fitted with the electric coil
accessory of suitable capacity. It is installed
downstream of the finned coil only.
• PM Delivery plenum with circular start-up
Sandwich panel in hot galvanised steel, with
interposed polyurethane foam (40kg/m3). The
panel is 15mm thick. It is installed in place of
the delivery panel with rectangular flange, using
the same 4 self-threading screws.
• Control panels:
PX with selector only
WMT05 Electromechanical thermostat.
WMT10 control panel
Accessories
• FAF filter G4 on intake
Contained in the special housing, it is made of
synthetic fibre and pleated geometry; the
U-shaped frame is in galvanised sheet metal
with two galvanised wire support nets
• SM Mixing chamber with G4 filter and dampers
Galvanised steel housing complete with two air
adjustment dampers with opposed fins in galvanised steel. The housing comes complete with a
synthetic fibre filter (efficiency class G4, in
accordance with standard EN779).
• SR Intake damper
Consisting of a frame with galvanised steel ribbed fins. The fins are moved by nylon toothed
wheels.
• GM Delivery grille
Grille with double row of adjustable fins to
introduce air into the room.
FAF
SM
SR
GM
GA
CMA
BP
64
TDA09
FAF1
SM1
SR1
GM5
GA5
CMA5
BP1
TDA15
TDA21
TDA 28
FAF2
FAF3
FAF4
SM2
SM3
SM4
SR2
SR3
SR4
GM6
GM7
GM8
GA6
GA7
GA8
CMA6
CMA7
CMA8
BP2
BP3
BP4
TDA37
FAF4
SM5
SR4
GM8
GA8
CMA8
BP5
BR
PM
PX
WMT05
WMT10
TDA09
BR1
PM1
•
•
•
Cooling capacity with
R-407C coil (3)
Heating capacity with 3-row coil (4)
Heating coil capacity for 4-pipe systems (4)
Heating capacity with coil for 4-pipe systems (5)
Electric coil capacity
Electric coil power supply
Fans
Motors
Total fan input power
Fan input current
Fan power supply
Filter efficiency (6)
Sound power level (7)
Connections
Water battery collectors
Direct expansion liquid coil pipes
Direct expansion gas coil pipes
Condensate discharge
15
1400
389
330
7,40
5,60
9,70
6,90
7,50
5,20
16,60
19,90
8,80
8,10
9,80
4,30
6
1
1
0,357
1,6
2
2
0,713
3,1
dB(A)
G4
62
Ø mm
Øi mm
Øu
Ø mm
1”
10
18
3/8”
n°
kW
A
(1) at nominal flow rate with 3-row coil
(2) Incoming air temperature 27°C d.b. 19°C w.b.; water temperature (In-Out)
7°C-12°C
(3) Incoming air temperature 27°C d.b. 19°C w.b.; average evap. temp. 7°C
(4)
(5)
(6)
(7)
28
2700
750
150
14,70
10,90
18,40
12,50
14,10
9,90
32,10
36,80
16,40
15,70
18,20
7,80
10
37
3500
972
240
17,90
13,70
22,30
15,20
16,70
12,40
41,20
45,40
20,90
20,10
22,30
10,00
12
1
1
0,874
3,8
2
2
1,771
7,7
G4
63
21
2000
556
227
11,10
8,20
13,10
9,40
10,70
7,40
24,20
27,30
12,60
11,90
13,40
6,00
8
230V~/50Hz
2
2
0,736
3,2
230V~/50Hz
G4
70
G4
72
G4
73
1”
10
22
3/8”
1”
12
22
1/2”
1”
16
28
1/2”
1”
16
28
1/2”
Incoming air temperature 20°C; water temperature (In-Out) 70°C-60°C
Incoming air temperature 20°C; water temperature (In-Out) 45°C-40°C
In accordance with standard EN 779
In accordance with standard UNI EN ISO 9614
Dimensions (mm)
TDA15
TDA21
TDA 28
BR2
BR3
BR4
PM2
PM3
PM4
•
•
•
•(1)
•(1)
•(1)
•(1)
•(1)
•(1)
B
TDA 37
BR5
PM4
•(2)
•(2)
•(2)
(1) Envision the use of SIT and the replacement of the AA fuse with one AA fuse
(2) Envisions return relay, one per speed
TDA
Height (B)
Width (C)
Lenght (A)
Net weight *
mm
mm
mm
kg
9
300
920
630
42
15
320
1000
670
53,00
21
320
1400
670
71,00
28
380
1400
790
88,00
37
380
1400
790
91,00
(*) with 4-row coil
A
C
65
Cod.: STDAUY.01 / 0911
The conditioning units in the TDA range have
been designed for small and medium sized
rooms in civil, commercial and hotel type
systems.
The units are designed to guarantee high head
levels and are suitable for both vertical and
horizontal installation, to ensure greater
versatility of use. The outstanding aesthetic
finish of the product makes it perfect for
installation in box rooms, bathrooms,
suspended ceilings or in the room itself.
The wide range of sizes and accessories
available means it's easy to choose the best
model for the specific requirements.
total
sensible
total
sensibile
totale
sensibile
Cooling capacity with 3-row coil (2)
9
800
222
277
4,90
3,50
6,10
4,30
5,10
3,50
10,40
12,10
5,20
5,10
6,00
2,50
4
m3/h
l/s
Pa
kW
kW
kW
kW
kW
kW
kW
kW
kW
KW
KW
KW
KW
Accessories
TA
Air handling unit with 4 row cooling coil from 4.5 up to 32 kW
5.5 a 40 kW 6 row coil
heating efficiency with 4 row coil from 14.0 up to 78.0 kW
15.5 a 87.5 kW 6 row coil
•HORIZONTAL OR VERTICAL CONFIGURATION •VERSION WITH 4-6 ROWS WATER COIL •VERSION WITH 4 ROW EXPANSION COIL USING R410A
•VERSION WITH EXTRACTOR
Features
The air conditioning units in the TA range are
destined to civil, commercial and hotel
systems, for applications in small to medium
sized environments.
The units in the TA range are characterised for
their compactness (indispensable requisite for
typical suspended-ceiling applications), the
low noise and high useful static pressure.
The great availability of accessories (e.g. bag filters and the mixing chambers with 3 dampers) allows to satisfy the most varied plant
requirements
• Structure realised with sandwich panels with
thickness of 15 mm with polyurethane (density 40 kg/m3). The intake panel is equipped
with a flange for fitting to any air channels.
Horizontal or vertical fixing to a wall is made
sleeves are supplied for the hydraulic attacheasy by the brackets.
ments and the air vent valve.
• Filtration of the air entrusted to class G4 fil- The possibility to rotate the coils on site is
ters in compliance with EN779 (thickness
envisioned.
50mm) as per standard positioned at intake.
• Also available are coils with 4 rows with
• Fans double intake centrifugal with forward
direct expansion operating with R410A fluid
blades and directly coupled motor.
and post-heating coils with 1 and 2 rows rea The 230V-50Hz single-phase motor has many
lised in copper piping with aluminium louspeeds, of which three can be selected via the
vers blocked via mechanical expansion of the
control panel.
pipes.
• Condensate drip tray interior isolated in aluminium alloy.
• Coils with 4, 6 rows that can be fed with hot
or cooled water realised in coil in copper
piping with aluminium louvers blocked via
mechanical expansion of the pipes. Threaded
Choosing the unit
By appropriately combining the variety of options available, it is possible to configure every model in a manner that satisfies all specific implant
requirements.
1 2
3 4
5
6
||||
Code
|Configuration|
||
Size
Version
Code:
TA
Size:
09, 11, 15, 19, 24, 33, 40, 50
Configuration:
H - Horizontal
V -Vertical
X - Extractor
Version:
4 - Coil with 4 rows
6 - Coil with 6 rows
E - R410A coil with direct expansion 4 left rows
• M2S 2 damper mixing chamber
Louver pitch 50 mm; regulation pin in galva Galvanised sheet steel section complete with
nised steel with diameter 8 mm mechanisatwo air calibration dampers with galvanised
tion.
sheet steel louvers.
Louver pitch 50 mm; regulation pin in galva- • VRF Recovery fan section with G4 filter
nised steel with diameter 8 mm mechanisa- Fan unit, equipped with electronic varistor of
tion.
the number of revs. contained in a section in
galvanised sheet steel equipped with flat fil• M3S 3 damper mixing chamber
ters with G4 efficiency (EN779).
Galvanised sheet steel section complete with
three air calibration dampers and galvanised • PMM Plenum with multiple circular flows
sheet steel louvers.
Plenum equipped with sandwich panelling
Louver pitch 50 mm; regulation pins in galvawith thickness of 15 mm in galvanised steel
nised steel with diameter 8 mm mechanisawith polyurethane insulation. The plenum is
tion.
supplied with multi-diameter circular attach Va must be coupled with the VRF accessory
ments (200 mm, 180 mm and 150 mm) in
plastic to allow the connection of circular
• FTF Soft bag filters section
conduits.
Galvanised sheet steel section complete with
soft bag filters with F6 filtration level.
• PMC Closed flow plenum
For different filtrations, contact the AERMEC Plenum closed equipped with sandwich
technical-sales dept.
panelling with thickness of 15 mm in galvanised steel with polyurethane insulation.
• B1R 1 row water coil
The plenum allows to turn the flow by 90°.
For 4 pipe systems, positioned internally, The opening of the flow hole is the installer's
downstream from the main coil.
responsibility.
Threaded sleeves are supplied for the hydraulic attachments and the air vent valve.
• SAS Intake damper
Air calibration damper with galvanised sheet
steel louvers.
For 4 pipe systems, positioned internally, Louver pitch 50 mm; regulation pin in galvadownstream from the main coil.
nised steel with diameter 8 mm mechanisa Threaded sleeves are supplied for the hydraution.
lic attachments and the air vent valve.
• GMD Flow grid with moveable louvers
• PBE Section with post-heating coil
Grid with double order of moveable louvers
The electric coil is made up from armoured
for the introduction of air into the room to be
resistances equipped with double safety therconditioned.
mostat.
It can be installed directly onto the appliance
by removing the flanges or on the wall.
• SSL Module with seven silencers
Galvanised sheet steel section complete with • GAP Intake grid
seven silencers in mineral wool covered with With fixed louvers inclined by 45°; can be
a polyethylene film to prevent exfoliation.
installed directly onto the appliance by removing the flanges or on the wall.
• S2Z Damper with 2 areas (70-30%)
Galvanised sheet steel damper with opposite • FPI G4 flange filters
louvers for the mixture of the external air flow • PX Switch-over only control panel
and the flow of recirculation air.
M2S
M3S
FTF
B1R
B2R
PBE
SSL
S2Z
VRF
PMM
PMC
SAS
GMD
GAP
FPI
PX
WMT 05
WMT 10
TA 09
M2S1
M3S1
FTF1
B1R1
B2R1
PBE1
SSL1
S2Z1
VRF1
PMM1
PMC1
SAS1
GMD1
GAP1
FPI1
•
•
•
TA 11
M2S1
M3S1
FTF1
B1R1
B2R1
PBE2
SSL1
S2Z1
VRF2
PMM1
PMC1
SAS1
GMD1
GAP1
FPI1
•
•(1)
•(1)
TA 15
TA 19
M2S2
M2S3
M3S2
M3S3
FTF2
FTF3
B1R2
B1R3
B2R2
B2R3
PBE3
PBE4
SSL2
SSL3
S2Z2
S2Z3
VRF3
VRF4
PMM2
PMM3
PMC2
PMC3
SAS2
SAS3
GMD2
GMD3
GAP2
GAP3
FPI2
FPI3
•
•
•(1)
•(1)
•(1)
•(1)
TA 24
M2S4
M3S4
FTF4
B1R4
B2R4
PBE5
SSL4
S2Z4
VRF5
PMM4
PMC4
SAS4
GMD4
GAP4
FPI4
•
•(1)
•(1)
• WMT 05 Electro-mechanical thermostat
For fan coils installed in 2 pipe systems The
panel must be installed on the wall and protected electrically by an internal fuse.
Has the following functions: on/off switch;
cursor for the selection of heating/cooling
modes (manual season change); cursor for the
selection of fan speed (high, medium and
low); temperature selector switch
(+5°C÷30°C)
• WMT10 Control panel
For can coils with wall installation.
Control functioning of the fan coil depending
on the mode set.
The panel must be mounted on the wall, it is
used on 4 pipe and 2 pipe and 2 pipe with
resistance systems, with the possibility of
connecting two On - Off type valves for the
cut-off of the coil supply water. The panel is
protected electrically by an internal fuse.
The control has the following functions: cursor for the selection of the cooling or heating
functioning mode;
manual season change;
manual selection of the fan speed
selection of the desired environment temperature (+10°CA÷30°CA);
2 pipe systems management;
4 pipe systems management;
2 pipe systems management (cooling) +
electrical resistance (heating);
thermostat ventilation;
continuous ventilation;
continuous ventilation in cooling mode and
thermostat ventilation in heating mode.
TA 33
M2S4
M3S4
FTF4
B1R4
B2R4
PBE6
SSL4
S2Z4
VRF6
PMM4
PMC4
SAS4
GMD4
GAP4
FPI4
•(2)
•(2)
•(2)
TA 40
M2S5
M3S5
FTF5
B1R5
B2R5
PBE7
SSL5
S2Z5
VRF7
PMM5
PMC5
SAS5
GMD5
GAP5
FPI5
•(2)
•(2)
•(2)
TA 50
M2S5
M3S5
FTF5
B1R5
B2R5
PBE8
SSL5
S2Z5
VRF8
PMM5
PMC5
SAS5
GMD5
GAP5
FPI5
•(2)
•(2)
•(2)
(1) Envision the use of SIT and the replacement of the 2A fuse with one 4A fuse
(2) Envisions return relay, one per speed
Example of a sale code: TA09H4
This is a TA unit, size 09 horizontal with 4 row coil.
66
67
Technical data
Mod. TA
Cooling capacity with 4 row coil (2)
Cooling capacity with 6 row coil (2)
Cooling capacity with 4 row coil with direct exp.R-410A (3)
total
sensible
total
sensible
total
sensible
Heating capacity with 4 row coil (4)
1 row water coil heating capacity for 4 row pipes (8)
Heating capacity with 6 row coili (5)
Number of electric coil stages
Electric coil power supply
Fans
Motors
Fans total input power
Fans input current
Fans power supply
Poles
Flat filters capacity (6)
Soft bag filters efficiency (6)
Sound power level (7)
Connections
Coils collectors
Direct expansion coil pipes
Condensate Drain
IN
OUT
m3/h
l/s
Pa
kW
kW
kW
kW
kW
kW
kW
kW
kW
KW
KW
KW
KW
KW
KW
n°
9
900
250
110
4.7
3.5
5.4
3.9
6.6
4.2
14.2
15.7
5.2
8.4
5.5
6.1
2.2
3.6
4
2
11
1100
306
277
5.7
4.2
6.7
4.7
7.3
4.7
16.6
18.5
5.7
9.5
6.4
7.2
2.4
4.1
6
2
15
1500
417
249
8.7
6.2
11.7
7.5
11.0
7.0
23.9
26.6
9.2
14.2
9.3
10.5
4.0
6.2
8
2
n°
n°
W
A
1
1
357
1,6
2
2
713
3,1
2
2
713
3,1
n°
dB(A)
2
G4
F6
63
2
G4
F6
66
2
G4
F6
67
Ø inc.
Ø mm.
Ø mm.
Ø inc.
1"
16
22
¾
1"
16
22
¾
1"
16
22
¾
19
24
1900 2400
528
667
223
165
12.4
17.3
8.3
11.2
15.5
20.6
9.8
12.8
14.2
19.2
9.1
12.1
30.8
40.6
34.2
44.3
11.4
15.9
17.9
24.3
12.1
16.0
13.6
17.6
4.9
6.9
7.8
10.6
10
12
2
2
400V-3-50Hz
1
1
1
1
886
874
3,9
3,8
230V-1-50Hz
4
4
G4
G4
F6
F6
72
74
1"
16
22
¾
1"
16
22
¾
33
3300
917
215
21.7
14.3
26.3
16.6
23.0
14.8
52.2
58.0
18.3
29.9
20.6
23.0
7.9
13.0
16
2
40
4000
1111
220
27.2
18.0
33.5
20.9
30.5
19.4
65.8
72.6
25.2
38.9
25.9
28.9
10.9
16.9
20
2
50
5000
1389
163
31.8
21.3
39.6
25.0
34.5
22.3
78.3
87.5
27.7
44.9
30.8
34.8
12.0
19.5
24
2
2
2
1771
7,7
2
2
1771
7,7
2
2
2852
12,4
4
G4
F6
75
4
G4
F6
76
4
G4
F6
79
1"
16
22
¾
1"
22
28
¾
1"
22
28
¾
B
C
A
D
TA HORIZONTAL INSTALLATION AND WITH EXTRACTOR
Mod. TA
9
11
HORIZONTAL CONFIGURATION DIMENSIONS AND "EXTRACTOR" CONFIGURATION
Height (B)
mm
300
300
Width (C)
mm
700
700
Lenght (A)
mm
700
700
Connections projection (D)
mm
82
82
Number of fans
n°
1
2
15
19
24
33
40
50
300
1050
700
82
2
390
1050
850
82
1
390
1475
850
82
1
390
1475
850
82
2
390
2100
1000
82
2
390
2100
1000
82
2
11
15
19
24
33
40
50
840
300
700
840
300
700
840
300
1050
1090
390
1050
1090
390
1475
1090
390
1475
1090
390
2099
1090
390
2099
732
655
70
1
732
655
70
2
1082
655
70
2
1082
905
70
1
1507
905
70
1
1507
905
70
2
2131
905
70
2
2131
905
70
2
9
28
30
11
33
35
15
45
47
19
60
62
24
78
81
33
86
89
40
135
139
50
140
144
D
C
F
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
At nominal capacity with 4 row coil
Entry air temperature 27°C d.b. 19°C w.b.; water temperature (Ent-Ex) 7°C - 12°C
Entry air temperature 27°C d.b. 19°C w.b.; medium evap. temperature 2°C
Entry air temperature 10°C; Water temperature (Ent-Ex) 70°C - 60°C
Entry air temperature 20°C; Water temperature (Ent-Ex) 45°C - 40°C
Inc with the EN 779 Standard
Sound power in compliance with UNIX EN ISO 9614-2 Standards
Entry air temperature 15°C; Water temperature (Sent-Ex) 70°C - 60°C
36,5°
E
B
F
A
68
Mod. TA
VERTICAL CONFIGURATION DIMENSIONS
Height (B)
Width (C)
Lenght (A)
Fixing points
(D)
(E)
(F)
Number of fans
9
mm
mm
mm
mm
mm
mm
mm
n°
UNIT NET WEIGHTS
4 row coil
6 row coil
Extractor
mm
kg
kg
69
Cod.: STAUY.00 / 0910
TA VERTICAL INSTALLATION
Accessories
TUN
• M2S Mixing chamber 2 dampers
Section made of galvanised steel sheet with two
air calibration dampers and louvers made of
galvanised sheet steel. 50 mm louver pitch; 8
mm motorised regulation pin made of
galvanised steel.
Ductable air-conditioning unit
• M3S Mixing chamber 3 dampers
Section made of galvanised steel sheet with
three air calibration dampers and louvers made
of galvanised sheet steel. 50 mm louver pitch; 8
mm motorised regulation pins made of
galvanised steel. It must be coupled with the
VRF accessory.
• FTF Soft bag filter section
Section made of galvanised steel sheet with F6
filtering degree soft bag filters. For
different filtering degrees please contact the
Aermec Sales Technical Dept. It must be
coupled with a powered unit.
For 4-pipe systems, positioned internally,
downstream the main coil. The threaded
sleeves for the hydraulic connections and the air
bleeding valve are supplied.
•UNIVERSAL CONFIGURATION
•VERSION WITH 4-6 ROW COIL
•VERSION WITH EXTRACTOR
• PBE Section with post-heating coil
The electric coil consists of armoured
resistances fitted with a twin safety
thermostat.
Features
The air-conditioning units of the TUN series are
intended for civil, commercial and hotel
systems in small to medium sized environments.
They are distinguished by their compactness (a
necessary requisite for false ceiling applications)
and low noise. The wide range of accessories
meets various system requirements
• The structure is made of 1.5 mm thick hot
galvanised sheet metal, insulated internally with
a V0 insulation class. The unit is
designed for any flow and/or intake channels to
be connected. The unit can be installed
horizontally or vertically and both are
facilitated by the relative brackets.
• Air-filtering relies on standard G2 class filters
in accordance with EN779 (6 mm thick),
positioned on intake.
threaded sleeves for the hydraulic
connections and the air bleeding valve are
supplied. The coils can be rotated on site.
• SSL Module with silencer baffles
Section made of galvanised steel sheet with
mineral wool silencer baffles covered in a
polyethylene film in order to prevent flaking.
• Forward blade double intake centrifugal fans
with a directly coupled motor. The single-phase
230V-50Hz multi-speed motor has three speeds
that are selected via a control.
• Post-heating 2-row coils are also available,
made of copper piping with aluminium
louvered fins blocked by mechanical
expansion of the pipes.
• S2Z 2-area damper (70-30%)
Damper made of galvanised steel sheet with
• PMM Plenum with circular flow attachments
1.5 mm Plenum made of hot galvanised sheet
metal. The plenum has multi-diameter
circular plastic fittings (200 mm, 180 mm and
150 mm) for circular pipes to be connected.
• PMC Closed flow plenum
1.5 mm Plenum made of hot galvanised sheet
metal. The plenum allows the flow to turn 90°.
The installer must make the flow
aperture.
• SAS Intake damper
Air calibration damper with louvers made of
galvanised sheet steel. 50 mm louver pitch; 8
mm motorised regulation pin made of
galvanised steel.
• GMD Flow grid with adjustable louvers
Grid with double row adjustable louvers for air
to be introduced in the relative room. It can be
installed directly on to the appliance by
removing the flanges or on to the wall.
• GAP Intake grid
With louvers tilted at 45°; it can be installed
directly on to the appliance by removing the
flanges or on to the wall.
• FPI G4 filters for lower intake
• PX Control panel with only the switch-over
• WMT 05 Electro-mechanical thermostat
For fan coils installed in 2-pipe systems. The
panel must be installed on the wall and
protected electrically with an internal fuse. It
has the following functions: on / off switch;
cursor to select the heating / cooling modes
(manual season change); cursor to select the fan
speed (high, medium and low);
temperature selector (+5°C to 30°C)
• WMT 10 Control panel
For fan coils installed on the wall. Controls the
fan coil operation according to the set mode.
The panel must be wall mounted; it is to be
used in 4-pipe and 2-pipe systems and systems
with 2-pipes with resistance, with the possibility
of connecting two ON - OFF type valves for the
cut-off of the coil supply water. The panel is
protected electrically by an internal fuse. The
control has the following functions:
1) cursor to select the cooling or heating mode;
2) manual season change;
3) manual selection of the fan speed;
4) selection of the desired room temperature (+
10°C to 30°C);
5) 2-pipe system management;
6) 4-pipe system management;
7) 2-pipe system management (cooling) +
electrical resistance (heating);
8) thermostatic ventilation;
9) continuous ventilation;
10) continuous ventilation in cooling mode and
thermostatic in heating mode.
• Internal condensate drip tray made of 1 mm
thick hot galvanised sheet metal.
• 4-6 row coils, powered with hot or cold water
and made of copper piping with
aluminium louvered fins blocked by
mechanical expansion of the pipes. The
Choosing the unit
By appropriately combining the variety of options available, it is possible to configure every model in a manner that satisfies all specific implant
requirements.
1 2 3
4 5
6
7
||||
Code
|
Version |
||
Size
Configuration
Example of a sale code: TUN104P
This is a TUN unit, size 10 with a powered 4-row coil.
70
opposite louvers for the external air flow to
blend with the air circulation flow. 50 mm
louver pitch; 8 mm motorised regulation pin
made of galvanised steel.
• VRF Return ventilating section with a G4
filter
Ventilating unit equipped with an electronic rev
shifter, contained in a galvanised steel sheet
section with flat filters having a G4
efficiency (EN779).
Identication:
TUN
Size:
10, 15, 20, 25, 40
Version:
4 - 4 row coil
6 - 6 row coil
Configuration:
P - Powered
X - Extractor
M2S
M3S
FTF
B2R
PBE
SSL
S2Z
VRF
PMM
PMC
SAS
GMD
GAP
FPI
PX
WMT 05
WMT 10
TUN 10
M2S1
M3S1
FTF1
B2R11
PBE1
SSL1
S2Z1
VRF1
PMM1
PMC1
SAS1
GMD1
GAP1
FPI1
•
•
•
TUN 15
M2S2
M3S2
FTF2
B2R21
PBE3
SSL2
S2Z2
VRF3
PMM2
PMC2
SAS2
GMD2
GAP2
FPI2
•
•(1)
•(1)
TUN 20
M2S3
M3S3
FTF3
B2R31
PBE4
SSL3
S2Z3
VRF4
PMM3
PMC3
SAS3
GMD3
GAP3
FPI3
•
•(1)
•(1)
TUN 25
M2S4
M3S4
FTF4
B2R41
PBE5
SSL4
S2Z4
VRF5
PMM4
PMC4
SAS4
GMD4
GAP4
FPI4
•
•(1)
•(1)
TUN 40
M2S4
M3S4
FTF4
B2R41
PBE6
SSL4
S2Z4
VRF6
PMM4
PMC4
SAS4
GMD4
GAP4
FPI4
•(2)
•(2)
•(2)
TUN 40P
M2S5
M3S5
FTF5
B2R51
PBE7
SSL5
S2Z5
VRF7
PMM5
PMC5
SAS5
GMD5
GAP5
FPI5
•(2)
•(2)
•(2)
(1) SIT3 is to be used and the 2A fuse is to be replaced with a 4A fuse
(2) Install a replay, one per speed
71
Technical data
10
15
20
25
40
10P
40P
kW
kW
kW
kW
4,7
3,6
6,2
4,4
9,3
6,6
11,1
7,6
12,5
8,7
14,1
9,8
16,5
11,4
18,5
12,7
23,3
16,3
26,6
18,5
4,7
3,6
6,2
4,4
26,4
18,2
29,4
20,1
l/h
l/h
804
1072
1599
1910
2141
2420
2832
3184
4002
4572
804
1072
4536
5051
kPa
kPa
kW
kW
kW
kW
kW
3
9
16
34
33
20
33
20
60
37
3
9
56
28
11,2
12,5
5,5
6,1
19
21,1
9,3
10,5
24,9
27,5
12,1
13,6
32,3
35,4
16
17,6
46,7
52,2
25,9
28,9
16,6
18,5
6,4
7,2
51,1
56,1
30,8
34,8
l/h
l/h
978
1097
1663
1849
2183
2410
2831
3101
4089
4573
978
1097
4475
4909
kPa
kPa
kW
l/h
kPa
4
7
7
609
4
13
24
11,7
1026
7
24
15
15,3
1339
7
24
14
20,5
1792
10
46
28
27,9
2444
17
4
7
7
609
4
41
20
31,8
2786
10
kW
n°
4
2
8
2
10
2
12
2
400V/3/50Hz
20
2
6
2
20
2
Cooling capacity with:
6-row coil
(1)
Water flow rate
4-row coil
6-row coil
Pressure drop
4-row coil (2)
6-row coil (2)
Heating capacity with
4-row coil (2)
6-row coil (2)
4-row coil (3)
6-row coil (3)
Water flow rate
4-row coil
6-row coil
Pressure drop
4-row coil
6-row coil
Heating capacity 2-row water coil
Water flow rate
Pressure drop
Electrial coil:
No. of stages of the electric coil
Power supply
fan:
Air flow rate (4)
Static pressure
Fan input current
Fan power supply
Poles
Power supply
Filters:
Efficiency of flat filters (5) std/opt
Efficiency of bag filters (6)
Sound data:
Sound power
Hydraulic connections:
Main coil collectors
Additional coil
total
sensible
total
sensible
total
total
total
total
m3/h
Pa
W
A
n°
900
110
357
1,6
2
1500
150
713
3,1
2
2000
170
886
3,9
4
2500
150
874
3,8
4
230V/1/50Hz
4000
120
1771
7,7
4
900
330
713
3,1
2
4000
220
1771
7,7
4
G2/G4
F6
G2/G4
F6
G2/G4
F6
G2/G4
F6
G2/G4
F6
G2/G4
F6
G2/G4
F6
dB(A)
68
72
77
78
79
71
80
Ø
Ø
1”
¾"
1”
¾"
1”
¾"
1”
¾"
1”
¾"
1”
¾"
1”
¾"
STD/OPT
(1) Temperature of incoming air Water temperature inlet
Water temperature outlet
27°C b.s.|19°C b.u.
7°C
12°C
10°C
70°C
60°C
(4) At nominal flow rate with 4-row coil
20°C
45°C
50°C
72
(5) In compliance with EN 779
(6) In compliance with UNI EN ISO 9614-2
A
C
B
TUN HORIZONTAL INSTALLATION WITH EXTRACTOR
Mod. TUN
10
10P
15
DIMENSIONS OF A HORIZONTAL INSTALLATION AND "EXTRACTOR" CONFIGURATION
Height (A)
mm
300
300
300
Width (B)
mm
700
700
1050
Length (C)
mm
700
700
700
Connection projection
mm
82
82
82
Number of fans
n°
1
2
2
UNIT NET WEIGHTS
4-row coil
6-row coil
kg
kg
10
33
35
10P
37
38
15
47
49
20
25
40
40P
390
1050
850
82
1
390
1475
850
82
1
390
1475
850
82
2
390
2100
1000
82
2
20
59
61
25
88
92
40
88
92
40P
108
108
Cod.: STUNUY.02 / 1106
4-row coil (1)
73
Technical data
T (standard)
Air handling unit with cooling capacity from 15.6 up to 137.8 kW
4-row coil
Cooling capacity
Heating capacity
Max. effective static pressure
Coil surface area
Motor power
kW
kW
Pa
m3/h
m2
kW
T14
15,6
32
138
3000
0,332
0,55
T24
20,6
42,3
174
4000
0,432
0,75
T34
30,2
60,1
253
5600
0,615
1,1
T44
39,8
80,6
235
7600
0,815
1,5
T54
56,6
114
246
10800
1,141
2,2
T64
68,1
154,2
290
14000
1,485
3
T74
98
224
271
20400
2,16
4
6-row coil
Cooling capacity
Heating capacity
Max. effective static pressure
Coil surface area
Motor power
kW
kW
Pa
m3/h
m2
kW
T16
20,1
39
117
3000
0,332
0,55
T26
25,8
51,4
151
4000
0,432
0,75
T36
38,1
73
228
5600
0,615
1,1
T46
53
99,3
210
7600
0,815
1,5
T56
76,1
141
220
10800
1,141
2,2
T66
95,3
188,9
268
14000
1,485
3
T76
137,8
274,7
249
20400
2,16
4
Power supply = 3~ 230V 50Hz; 3~ 400V 50Hz
Cooling:
- water temperature 7 - 12 °C.
Heating:
-pressure measured with dry coil.
- nominal air flow rate.
Selection
The T series constitutes an alternative to the air handling units in the range with flow rates from 3000 to 20000 m3/h in cases where requirements are
limited to the filtration, cooling and/or heating for civil and industrial buildings.
The units from “T” series are manufactured for vertical installation with delivery outlet at the top, front suction and left hand connections.
Both “standard” models and those to be “configured” can be rotated on site to get different configurations (refer to manuals for models to be configured).
Modularity
The T (standard) series is composed of the following sections for each
size:
-Ventilating section.
-Housing section for cooling coil, condensate drip tray and filter.
For different configurations refer to manuals for models to be
configured.
Features
• Frame in aluminium profiles with black nylon
corner pieces and pre-plastified steel panelling
• Sandwich panels with injected polyurethane
core (density 40 kg/m3), total thickness is 25
mm
• Delivery plenum with internal sound insulating lining
• Adjustable speed double suction radial fans
• Vee belt and pulley transmission; adjustable • Heat exchangers with 4 or 6 rows for heating
diameter driving pulley
and/or cooling
• UNELMEC normalized motors (protection fac- • Synthetic G3 class pleated filters
tor IP 55 and insulation class F)
• Elastomer dampers under the motor cradle and
• Modular structure offering the maximum veron upper side of fan unit
satility of installation
• Effective static pressure sufficient for connection to extensive duct networks
Dimensions (mm)
Accessories
• GC: Cooling section intake grille. In anodized
aluminium with single row of fixed slats.
• M: Delivery plenum. Made using same panelling as basic unit but equipped with an internal layer of sound insulating material. To be
adopted in non-ducted installations for the • P: Feet kit. Feet in galvanized steel; height of
delivery of processed air into the building
unit increases by 50 mm.
through a louver with two rows of angle-adjustable slats. Outlet louver in anodized aluminium.
Position
1°
2°
3°
74
Code
T
1
2
3
4
5
6
7
4
6
Description
T series
nominal flow rate 3000 m3/h
air conditioning section with 4-row coil
Height
Width
Depth
A
B
C
T14/T16
1300
1100
650
T24/T26
1300
1350
650
T34/T36
1480
1500
740
T44/T46
1480
1900
740
T54/T56
1740
1900
870
T64/T66
1740
2560
870
T74/T76
2260
2560
1130
75
Cod.: STSUY.00 / 0106
Designation codes for T series units
T
Technical data
Air handling unit with cooling capacity from 8.8 up to 137.8 kW
Cooling capacity
Heating capacity
Max. effective static
pressure
Coil surface area
Motor power
2R
3R
4R
6R
2R
3R
4R
6R
2R
3R
4R
6R
kW
kW
kW
kW
kW
kW
kW
kW
Pa
Pa
Pa
Pa
m3/h
m2
kW
T1
8,8
12,6
15,6
20,1
20
26,8
32
39
164
151
138
117
3000
0,332
0,55
T2
12,7
17
20,6
25,8
26,9
35,6
42,3
51,4
199
185
174
151
4000
0,432
0,75
T3
17,6
24,4
30,2
38,1
37,8
50,4
60,1
73
277
265
253
228
5600
0,615
1,1
T4
23,6
32,6
39,8
53
50,8
67,7
80,6
99,3
259
247
235
210
7600
0,815
1,5
T5
33,5
45,6
56,6
76,1
71,9
95,5
114
141
271
258
246
220
10800
1,141
2,2
T6
38
53
68,1
95,3
98
129,3
154,2
188,9
310
299
290
268
14000
1,485
3
T7
69,9
81,4
98
137,8
150
190,4
224
274,7
297
284
271
249
20400
2,16
4
Power supply = 3~ 230V 50Hz; 3~ 400V 50Hz.
Cooling:
Heating:
- pressure measured with dry coil.
-nominal air flow rate.
Selection
the photo is just an example.
The T series constitutes an alternative to the air handling units in the range with flow rates from 3000 to 20000 m3/h in cases where requirements are
limited to the filtration, cooling and/or heating for civil and industrial buildings.
T series units are suitable for ducted or non-ducted installations. The appliances can be equipped with numerous accessories on the intake and delivery sides. T series appliances can be installed vertically or horizontally, with intake and delivery sides oriented with the maximum freedom.
Features
• Frame in aluminium profiles with black nylon
corner pieces and pre-plastified steel panelling
• Sandwich panels with injected polyurethane
core (density 40 kg/m3), total thickness is 25
mm
• Delivery plenum with internal sound insulating lining
• Adjustable speed double suction radial fans
• Vee belt and pulley transmission; adjustable • Heat exchangers with 2, 3, 4 or 6 rows for
diameter driving pulley
heating and/or cooling
• UNELMEC normalized motors (protection fac- • Synthetic G3 class pleated filters
tor IP 55 and insulation class F)
• Elastomer dampers under the motor cradle and
• Modular structure offering the maximum veron upper side of fan unit
satility of installation
• Effective static pressure sufficient for connection to extensive duct networks
Accessories
• GC: Cooling section intake grille. In anodized
• GR: Heating section intake grille. In anodized
•M: Delivery plenum. Made using same panelling as basic unit but equipped with an internal
layer of sound insulating material. To be adopted in non-ducted installations for the delivery
of processed air into the building through a
louver with two rows of angle-adjustable slats.
Outlet louver in anodized aluminium.
• MO: Intake plenum with two dampers (recirculation and fresh air intake) for horizontal installations. The plenum is effectively an air mixing
chamber equipped one damper on the front
and the other on the top. Opposing slat type
dampers made of aluminium.
• MV: Intake plenum with two dampers (recirculation and fresh air intake) for vertical horizontal installations. The plenum is effectively an air
mixing chamber equipped one damper on the
front and the other on the rear. Opposing slat
76
type dampers made of aluminium.
adjust the intake air flow from another room or
• P: Feet kit. Feet in galvanized steel; height of
from an external louver.
unit increases by 50 mm.
• RT: Intake plenum with front opening for con• RC: Intake plenum with front grille. Similar to
nection to the suction duct. Made using the
plenum RT but with anodized aluminium grille
same panel type as the basic T series conditiowith single row of fixed slats: used when air is
ning unit.
drawn in directly from the room in which the • RV: Intake plenum with front grille and full size
air conditioning unit is installed.
lateral opening. Similar to plenum RC but
• RF: Intake plenum with front grille and partial
without one of the lateral panels to provide the
lateral opening. Similar to plenum RC but with
facility for flanging an intake duct to supply
partial opening on one of the side panels to
part of the air flow from another room or from
accept a flanged intake duct supplying part of
an external louver.
the intake air from a different room or from an
external louver.
• RP: Intake plenum with front grille and partial
flow lateral damper. Similar to plenum RC but
equipped with a smaller damper on one of the
side panels to adjust intake air flow from another room or from an external louver.
• RS: Intake plenum with front grille and full size
lateral damper. Similar to plenum RC but one
of the side panels is replaced with a damper to
Modularity
The T series is composed of the following sections for each size:
- Ventilating section.
- Housing section for heating coil and filter.
- Housing section for cooling coil, condensate drip tray and filter.
- Delivery plenum section.
- Intake plenum section.
Individual units can be configured as follows (components given in
sequence following air flow path).
Heating only:
- Heating coil section + ventilating section
- Heating coil section + ventilating section + delivery plenum
- Intake section + heating coil section + ventilating section
- Intake plenum + heating coil section + ventilating section +
delivery plenum
Cooling only or heating/cooling with dual function coil:
- Cooling coil section + ventilating section
- Cooling coil section + ventilating section + delivery plenum
- Intake plenum + cooling coil section + ventilating section
- Intake plenum + cooling coil section + ventilating section +
delivery plenum
Pre-heating and cooling:
- Heating coil section + cooling coil section + ventilating section
- Heating coil section + cooling coil section + ventilating section +
delivery plenum
- Intake plenum + heating coil section + cooling coil section +
ventilating section
- Intake plenum + heating coil section + cooling coil section +
ventilating section + delivery plenum.
Special designs
The following special designs are available to order:
-
-
-
-
-
-
-
-
4/6 pole motor
4/8 pole motor
2R superheated water coil (heavy gauge CuAl)
3R direction expansion coil
4R direction expansion coil
Ventilating section supplied without motor so that customer can
install preferred type.
Cooling and post-heating:
- Cooling coil section + heating coil section + ventilating section
- Cooling coil section + heating coil section + ventilating section +
delivery plenum
- Intake plenum + cooling coil section + heating coil section +
ventilating section
- Intake plenum + cooling coil section + heating coil section +
ventilating section + delivery plenum.
77
Designation codes for T series units
Position
1°
Code
T
1
2
3
4
5
6
7
0
2
3
4
6
0
2
3
4
GC
GR
MO
MV
RC
RF
RP
RS
RT
RV
00
M
0
P
0
1
2
3
4
A
I
P
S
D
A
B
2°
3°
4°
5° 6°
7°
8°
9°
10°
11°
Description
T series
no air conditioning sections
no heating section
heating section with 2 row coil
conditioning section intake grille
heating section intake grille
two-damper inlet plenum for horizontal installation
two-damper inlet plenum for vertical installation
intake plenum with recirculation grille and side panel
intake plenum with recirculation grille and panel with opening for fresh air intake
intake plenum with recirculation grille and partial size fresh air damper
intake plenum with recirculation grille and full size fresh air damper
frontal openining inlet plenum
intake plenum with recirculation grille and no side panel
no air intake accessories
delivery plenum with double row of slats on louver
no delivery plenum
feet
no feet accessory
vertical position of upper delivery outlet
vertical position of front delivery outlet
horizontal position of upper delivery outlet
horizontal position of front delivery outlet
intake from front
intake from base
intake from rear
left hand connections, with cooling coil or only coil first
right hand connections, with cooling coil or only coil first
left hand connections, with heating coil first (for use only with two coils)
right hand connections, with heating coil first (for use only with two coils)
Dimensions (mm)
standard version
Height
Width
Depth
A
B
C
T1
1300
1100
650
T2
1300
1350
650
T3
1480
1500
740
T4
1480
1900
740
T5
1740
1900
870
T6
1740
2560
870
T7
2260
2560
1130
Orientation
The ventilating sections and cooling coil sections are designed so that they can be oriented by altering the position of the intake side panel and the
air transfer partition wall between the two sections. The coils can be turned upside down so that the water connections can be presented on the left
or right hand sides. The connection side is defined when observing the unit with the fan motor on the left: the unit connections are left-handed when
they are on the same side as the fan motor.
The following figures show all possible configurations for each of the two water connection sides.
In the designation code, orientation is referred to the unit without the delivery and intake plenums; note also that the intake side of the first coil
should be considered in the direction of the air flow. For example, in the case of a unit composed of a heating coil, cooling coil and ventilating
section, orientation must be selected from among the possibilities shown below.
Note: units in which the first component is the heating section must not be installed on the floor in the vertical version (1xx and 2xx).
Example: a T series unit size 3, composed of a cooling section with 6 row coils, an intake plenum with external partial air intake damper and feet,
vertical positioning with delivery outlet at the top, intake of the coil section at the base and right hand water connections (the connection side is
considered when facing the machine with the motor on the left hand side and the connections on the opposite side), is designated with code T3 60
RP 0 P 1ID where:
T
---->
T series unit
3
---->
Air flow rate of 5600 m3/h
6
---->
Cooling section with 6 row coil
0
---->
No heating section
RP
---->
Intake grille with partial fresh air intake damper
0
---->
No delivery plenum
P
---->
Feet
1
---->
Vertical type with air expulsion at top
I
---->
Coil section air intake at base
D
---->
Right hand water connections
78
Cod.: STUY.02 / 0912
The 11 character commercial code is made up by selecting the required option from the above table for each position.
Configuration of the unit is defined by the last three letters.
79
Accessories
UR
• BF: Water cooling coil.
coil and 1-row water post-heating coil.
• SE: Free-Cooling control dampers.
• FGC: Circular flanges.
• MPX: Module with 4-row water cooling • SU: Silencers.
• G4: High-efficiency filters on the fresh air
coil and electric post-heating coil with reinintake in class G4.
forced finned coils. Safety thermostat inclu• MPW: Module with 4-row water cooling
ded.
Heat recovery unit
Horizontal installation:
These units allow to extract a certain amount of exhaust air from the room and supply an equivalent quantity of fresh air.
A crossflow aluminium plate exchanger assures an efficient heat exchange between exhaust and fresh air: therefore the fresh air is pre-heated or precooled according to the seasons.
The supply air is filtered before entering the heat recovery exchanger that is protected with a synthetic filter also at the exhaust air side.
The supply air can optionally be re-heated with a hot water coil or with an electric coil.
Features
• 7 sizes are available:
UR: standard version
UR W: same as standard version and equipped with water heating coil with copper
tubes and 3 rows aluminium fins. Not to be
used with chilled water
UR E: same as standard versions and equipped with electric heating coil with aluminium
fins and double safety thermostat
• Double suction centrifugal fans coupled
directly to the electric motors, equipped with
adjustable speeds via an electronic control to
80
vary the flow rate
cleaning or replacement
• G3 class synthetic filter on the air outlet
• Two versions available for horizontal and ver• Aluminium plate reheater housed in the contical installation (it is not possible to install
densate tray that is easily removed from the
the cooling coil accessories and silencers for
bottom
the vertical installation)
• G3 class synthetic filter on the fresh air intake • Electronic Regulator with Slave Application
• Self-bearing panels made of galvanized plate
allowing continuous variation of rotation
with injected polyurethane insulation and
speed and air flow rate
thickness 20 mm.
• Galvanized condensate tray
• Fans can be inspected from the bottom
• Filters can be removed from the bottom for
BF 35
BF 55
BF 75
BF 100
BF 150
BF 210
BF 330
FGC 1
FGC 2
G4 35
G4 55
G4 75
G4 100
G4 150
G4 210
G4 330
MPW 35
MPW 55
MPW 75
MPW 100
MPW 150
MPW 210
MPW 330
MPX 35
MPX 55
MPX 75
MPX 100
MPX 150
MPX 210
MPX 330
SE 1
SE 2
SE 3
SE 4
SE 5
SU 1
SU 2
SU 3
SU 4
SU 5
UR 35
✔
UR 55
UR 75
UR 100
UR 150
UR 210
UR 330
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Vertical installation:
FGC 1
FGC 2
G4 35
G4 55
G4 75
G4 100
G4 150
G4 210
G4 330
SE 1
SE 2
SE 3
SE 4
SE 5
UR 35
✔
UR 55
✔
UR 75
✔
UR 100
UR 150
✔
✔
UR 210
UR 330
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
81
Technical data
Lay-out (horizontal configuration)
Mod.
Air flow
m3/h
Recoverer:
Efficiency
Heat capacity recovered
Cooling capacity recovered
Output temperature
%
kW
kW
°C
Fan motor assembly:
Fans
Total input power
Max. input current
Fan speed variation
UR 35
350
UR 55
550
UR 75
750
UR 100
1000
UR 150
1500
UR 210
2100
UR 330
3300
52,1
1,5
0,4
8
55
2,5
0,7
8,7
54,3
3,4
1
8,6
54,4
4,6
1,3
8,6
53,1
6,7
1,9
8,3
52,7
9,3
2,6
8,2
52
14,3
4,3
8
2
0,44
1,7
continous
140
130
50
54
F
2
0,65
2,8
continous
170
160
50
44
F
2
1,12
5
continous
150
140
70
55
F
2
1,12
5
continous
150
140
50
55
F
2
2
8,6
continous
120
110
50
55
F
4
4
17,2
continous
150
140
50
55
F
G3
80
G3
80
G3
80
G3
80
G3
80
G3
80
G3
80
Electrical protection
Insulation class
2
0,27
1,1
continous
UR Standard
125
UR E
115
UR W
50
IP
44
B
Filtres:
EN779 Classification
Efficiency
%
Water heating coil (UR W):
Geometry
Rows
Fin pitch
Frontal surface area
Heating capacity (1)
Air output temperature (1)
n.
mm
m2
kW
°C
kW
°C
kW
°C
P2519
3
1,8
0,027
4,9
48
4,1
41,2
2,4
27,7
P2519
3
1,8
0,047
8,1
50
6,7
43
4
28,7
P2519
3
1,8
0,052
10,6
48
8,8
41,3
5,2
27,8
P2519
3
1,8
0,092
15,5
52
13
45
7,7
30
P2519
3
1,8
0,119
22,4
51
18,7
43,6
11,2
29,2
P2519
3
1,8
0,165
31
50
25,9
43
15,4
29
P2519
3
2,1
0,237
43
46
36,6
39,5
22
27
Electric heating coil (UR E):
Heating capacity
Air side pressure drop
Stages
Input current
Air output temperature (air 8 °C)
kW
Pa
n.
A
°C
3
10
2
4,6
34
3
10
2
4,6
25
6
10
2
9,1
32
6
10
2
9,1
26
10
10
3
15,2
28
15
10
3
22,7
29
25
10
3
37,9
31
0,1125
4
4
48
0,2125
4
6,9
25
0,2125
4
8,8
54
0,25
4
12
74
0,25
4
17,5
105
Available static pressure (Pa)
n.
kW
A
Water cooling coil accessory with box to be positioned after the discharge fan:
Frontal surface area
m2
0,075
0,075
Rows
n.
4
4
Cooling capacity (4)
kW
2
3
Pa
25
57
Power supply = 1~ 230V 50Hz (3N~ 400V 50 Hz per le resistenze elettriche).
(1)air temp. 8 °C - water temp. 80/70 °C
(2)tair temp. 8 °C - water temp. 70/60 °C
(3)air temp. 8 °C - water temp. 45/40 °C
(4)air temp. 27 °C - HR 50% - water temp. 12/7 °C
Supply air
Fresh
air inlet
Return air
Supply
air
Return
air
Return air
Supply
air
Exaust air
Exaust air
Fresh air inlet
Fresh air inlet
Exaust
air
Fresh
air inlet
Supply
air
Return
air
Warning : the above diagrams refer to the unit in horizontal configuration only.
For the vertical configuration, please consult the manual.
Dimensions (mm)
Mod. UR
Height
Width
Depth
Weight (kg)
A
B
C
UR Std
UR E
UR W
35
1090
900
300
61
62
62
55
1090
900
300
65
66
66
75
1190
1000
330
74
75
75
100
1500
1250
390
115
117
117
150
1500
1250
390
130
133
133
210
1750
1400
390
170
174
174
330
2500
1750
390
280
286
286
Cod.: SURUY.02 / 0405
- ambient air temperature -5 °C.
Exaust air
82
83
Accessories
HRS
Heat recovery unit
• HRS_CS: Section of water cooling/heating - HRS230S (ø 400 mm)
(with stainless steel condensate drip tray).
• HRS_SC: Electronic speed regulator.
• HRS_ED: Regulation shutter.
• HRS_AT: Anti-freeze thermostat, allows to
• HRS_S: N° 4 circular connection kits for
control that the temperature does not fall
direct connection of the unit to the circular
below a pre-established value. Accessory
conduits.
installed in the factory, to be requested when
- HRS090S (ø 315 mm)
placing the order for the HRS W version.
- HRS160S (ø 355 mm)
HRS 030
HRS090CS
HRS160CS
HRS190CS
HRS230CS
HRS300CS
HRS390CS
HRS 300
HRS 300W
HRS 390
HRS 390W
✔
✔
✔
✔
✔
HRS090S
HRS160S
HRS230S
✔
HRS01AT *
PX
PX2
HRS 230
HRS 230W
✔
HRS090ED
HRS160ED
HRS190ED
HRS230ED
HRS030SC
HRS060SC
HORIZONTAL INSTALLATION
These units allow to extract a determined amount of air from the environment and replace it with fresh air.
An aluminium plate recovery unit allows effective heat exchange between the expulsion air flow and that of fresh air: the fresh air is pre-heated or
pre-cooled in this way, depending on the season, at the cost of the expelled air.
The air introduced is filtered before passing through the recovery unit, which is protected from dirtying with a filter of the same type also on the
expulsion side. The air introduced can also be post-heated int he versions with hot water heating coil.
HRS 060
✔
HRS 090
HRS 160
HRS 190
HRS 090W
HRS 160W
HRS 190W
• PX: Control panel with switch-over.
Wall installation. (from size 090 to 300)
• PX2: Control panel with switch-over.
Wall installation. (from size 090 to 300)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
* Accessory installed in the factory, compatible only with HRS W version, to be requested when placing the order.
Features
polyethylene/polyester with average thickness of • Terminal board on machine to ease the electric
HRS: standard version
20 mm.
connections and fan control.
HRS W: version with additional hot water coil. • Condensate drip tray in ABS with low conden- • Aluminium plate heat recovery unit housed in
It is used when post-heating is necessary.
sate drain connection.
condensate drip tray.
Available in models from 090 to 390.
• Air filters with G3 efficiency, easily extractable
• Horizontal installation.
laterally, to allow periodical cleaning.
• Panels realised in Aluzink sheet steel, remova- • Double intake centrifugal fans, coupled directly
ble for inspection and maintenance.
onto electric motors (with single intake for HRS
• Acoustic and heat insulation of the panels using
030).
84
85
Technical data
m3/h
Pa
A
dB(A)
HRS 030
300
45
0,75
43
HRS 060
620
55
1,8
51
HRS 090
920
65
2,2
50
HRS 160
1580
70
4,4
53
HRS 190
1850
77
4,8
52
HRS 230
2250
80
5,2
51
HRS 300
2950
100
8,3
54
HRS 390
3920
100
5
56
Recuperator
Efficiency (2)
Recovered heating capacity (2)
Conditioned air temperature (2)
%
kW
°C
53
1,5
8,3
54
3,1
8,5
55
4,7
8,8
54
7,9
8,5
54
9,2
8,5
54
11,2
8,5
51
13,9
7,8
57
20,6
9,3
Efficiency (3)
Recovered cooling capacity (3)
Conditioned air temperature (3)
%
kW
°C
46
0,27
29,2
48
0,58
29,1
48,5
0,88
29,1
47,5
1,48
29,2
47
1,73
29,2
47,5
2,11
29,2
45
2,63
29,3
50
3,86
29
Fans
Power
Poles
Number of fans
Number of speeds
Protection rating
Isolation class
W
n°
n°
n°
IP
92 x 2
4
2
1(5)
44
F
90 x 2
4
2
1(5)
44
F
147 x 2
4
2
3
44
F
350 x 2
4
2
3
44
F
350 x 2
4
2
3
44
F
350 x 2
4
2
3
55
F
550 x 2
4
2
3
44
F
750 x 2
4
2
1
55
F
G3
0,9
G3
1,7
G3
2
G3
2,3
G3
2,7
G3
1,8
G3
2,5
G3
2,8
-
25x22
2
14
2,5
8,2
33,4
25
8
3/4
2,5
25x22
2
18
2,5
12,2
30,8
32
14
3/4
2,5
25x22
2
18
2,5
14,4
30,2
35
15
3/4
2,5
25x22
2
22
2,5
20,3
33,2
24
17
3/4
5
25x22
2
22
2,5
24,2
31,3
36
22
3/4
5
25x22
2
22
2,5
29,9
29,7
38
30
3/4
6,5
Electric power supply
Filters (1)
Efficiency
Air front speed
230V ~ 50Hz 230V ~ 50Hz 230V ~ 50Hz 230V ~ 50Hz 230V ~ 50Hz 230V ~ 50Hz 230V ~ 50Hz
m/s
Features of the water post-heating coil (HRS W) (4)
Geometry
mm
Rows
n°
Pipes for row
n°
Louver pitch
mm
Heating capacity
kW
Air outlet temperature
°C
Pa
Water side pressure drop
kPa
Collectors diameter
Ø gas
Weight
kg
(1) Values
filters
referring to the nominal air flow rate including recovery unit and
(2) Winter
nominal conditions:
- external air temperature: -5°C BS, UR 80%
- environmental air temperature: 20 °C BS, UR 50%
- nominal air flow rate
(3) Summer nominal conditions:
- external air temperature: 32 °C BS UR 50%
- environmental air temperature: 26 °C BS, UR 50%
Mod.
HRS 030
HRS 060
Features of the water post-heating/cooling coil (HRS_CS)
Geometry
mm
Rows
n°
Pipes for row
n°
Louver pitch
mm
Heating (6)
Heating capacity
kW
°C
Water flow rate
m3/h
kPa
Pa
Cooling (7)
Cooling capacity
kW
kW
°C
Water flow rate
m3/h
kPa
Pa
-
(4) Heating:
- water input temperature: 70 °C
- ∆t = 10 °C
- air input temperature: 8 °C
(5) Can
86
* post-heating coil
* post-heating coil
ORIENTATION TYPE 04
ORIENTATION TYPE 03 STANDARD
* post-heating coil
* post-heating coil
ORIENTATION TYPE 03 (standard)
ORIENTATION TYPE 01 / 02 / 04: to be requested when placing the order
be adjusted electronically with HRS_SC regulator accessory
Key:
Air expelled
* post-heating coil:
ONLY AVAILABLE ON HRS W VERSION
Fresh air
 Noise pressure level: values referring to 1.5 m from machine intake in
free field.
HRS 090
HRS 160
HRS 190
HRS 230
HRS 300
HRS 390
25x22
3
16
2,1
25x22
3
22
2,1
25x22
3
25
2,1
25x22
3
26
2,1
25x22
3
26
2,1
25x22
3
26
2,1
13,2
45,1
1,2
4
29
19,4
43,1
1,7
11
38
25,7
44,4
2,3
20
36
33,9
46,9
3
18
25
38
43,4
3,3
21
38
44,7
40,9
3,9
22
53
5,4
3,8
19,2
0,92
4
38
9,1
6,1
19
1,57
14
48
12,3
8
18,7
2,04
27
50
16,3
10,6
17,9
2,87
26
40
18,3
11,9
18,7
3,15
31
52
21,6
14,3
19,5
3,7
26
56
(6) Heating
- air input temperature 12 °C,
- water input temperature 70 °C
- ∆t = 10 °C
ORIENTATION TYPE 02
ORIENTATION TYPE 01
(7) Cooling
- air input temperature 30 °C, UR 50%
- water input temperature 7 °C
- ∆t = 5 °C
Mod. HRS
Height
Length
Width
Weight (kg)
A
B
C
Mod. HRS
Height
Length
Width
Weight (kg)
A
B
C
HRS 030
HRS 060
HRS 090
290
290
410
990
990
1140
750
750
860
41
45
80
HRS 160
500
1300
860
125
HRS 190
500
1380
960
138
HRS 390
600
1750
1230
190
HRS 230
600
1650
1230
160
HRS 300
600
1650
1230
174
Cod.: SHRSUY.01 / 1003
Mod.
Total max input
 Sound Pressure
Internal layout (configurations available)
Technical data
UR CF
Heat recovery unit with refrigerant circuit included
R407C
In addition to the ventilation, filtering and recovery sections, the UR-CF series also enclosed a heat pump cooling circuit with R407C coolant in a monobloc unit. All
this creates a complete machine that independently operates in every season, able to combine necessary air
exchange in rooms with efficient heat recovery.
The precise machine design has also combined very compact dimensions for cassette installation without sacrificing accessibility for internal component maintenance.
Mod. UR
Nominal air capacity (*)
Minimum air capacity
Static pressure available in supply (**)
Static pressure available in recovery (**)
Pressure drops with water battery (**)
Pressure drops with electric battery (**)
Regenerator efficiency (***)
Recovered heat capacity (***)
Heat pump nominal heat capacity (***)
Total heat capacity (***)
Recovered cooling capacity (****)
Heat pump nominal cooling capacity (****)
Total cooling capacity (****)
Water heating battery heat capacity (70/60°C) (*****)
Water heating battery heat capacity (45/40°C) (*****)
Electric heating battery heat capacity (400V)
Capacity absorbed by fans
Number of fans
Total capacity absorbed in cooling (****) / in heating (***)
Power voltage (compressor)
m3/h
m3/h
Pa
Pa
Pa
Pa
%
kW
kW
kW
kW
kW
kW
kW
kW
kW
kW
n.
kW
V
075 CF
750
640
256
244
11
10
51
3,2
5,3
8,5
0,9
4,6
5,5
4,5
1,4
3
0,75
2
3/1,8
230V
100 CF
1000
850
211
203
19
10
56
4,7
6,7
11,4
1,3
6,4
7,7
5,5
1,7
4,5
0,75
2
3,6/2,3
230V
150 CF
1500
1275
223
206
17
10
53
6,6
9,5
16,1
2
8,3
10,3
8,4
2,7
6
1,5
2
5/3,7
400V
210 CF
2100
1785
146
134
25
10
56
9,8
14,1
23,9
2,9
14
16,9
11
3,5
9
1,5
2
6,7/4,5
400V
320 CF
3300
2800
267
246
41
10
54
14,9
16,6
31,5
4,4
15,3
19,7
15,6
5
12
2,5
2
8,0/5
400V
Power supply = 1~ 230V 50Hz; 3N~ 400V 50 Hz.
(*) At maximum fan speed.
(**) At nominal air capacity.
(***) Performance referred to: recovery air capacity equal to ejected air
capacity; external air input temperature -5 °C, 80% RH, room
temperature 20°C, 50% RH.
(****) Performance referred to: recovery air capacity equal to ejected air
capacity; external air input temperature 34 °C, 50% RH, room
temperature 26 °C, 50% RH.
(*****) Performance referred to: air temperature supplied to water
heating battery equal to air temperature outputted by condenser
battery in nominal conditions.
Lay-out
Free-Cooling
By-pass per
By-pass
Free-Cooling
Features
TRUCTURE AND PANELLING:
• 20 mm thick galvanised sheet self-supporting
sandwich panels insulated with injected
polyurethane (40 kg/m3 density)
• construction method able to simplify all
maintenance
FAN GROUP:
• dual suction centrifugal fans directly coupled
with electric motors
HEAT REGENERATOR:
• static cross flow type with aluminium plates
• peralluman condensation collection tank
REGULATION:
• unit equipped with switchboard complete
with power and regulation sections even of
3-way valves and servo drives if installed
• remote control terminal capacity (temperatuCOOLING CIRCUIT:
re)
• heat pump with scroll compressor, optimised • adjustable fans speede
• standard filter cleanliness meter control
to guarantee high yield and low noise levels
Fresh
air inlet
Aspirazione
aria di rinnovo
Ripresa
Return
air
dall'ambiente
Supply
air
Mandata
in ambiente
Exhaust
air
Espulsione
aria viziata
FILTERING:
• corrugated laid cell type filters (48 mm thick),
class G3 (80% weight efficiency), located at
both supply and recovery
Accessories
FCE
FGC
G4F
MBC
MBX
SUF
UR 75 CF
7
7
7
7
7
7
UR 100 CF
UR 150 CF
10
15
10
15
10
15
10
15
10
15
10
15
UR 210 CF
21
21
21
21
21
21
UR 320 CF
33
Dimensions (mm)
Mod. UR
Height
Width
Depth
Weight
A
B
C
kg
075 CF
1500
1300
450
215
100 CF
1500
1300
450
220
150 CF
1800
1500
550
305
210 CF
1800
1500
550
320
320 CF
1800
1600
600
400
Cod.: SURCFUY.04 / 0912
• FCE: free-cooling complete with control to be • G4F: efficiency filters to be used instead of
reset, to be applied on the air supply
added to the existent one. Free-cooling opeclass G3 standard filters..
• SUF: module with silencers, in specific box.
rations only occur if the unit is in summer • MBC: box complete with 2-level hot water
The accessory is made up of two modules,
mode, if the outside air temperature is least
battery to be applied on the air supply. 3-way
one for the supply and another for the reco10°C less than indoor air temperature and if
valves and relevant on-off type servo drives are
very.
the compressor protection control permits it.
included..
• FGC: circular flanges. Each accessory is made • MBX: box complete with single-stage electric
up of a flange to be coupled with one of the
battery with reinforced fin elements, with
unit's rectangular outlets
dual safety thermostat, automatic and manual
33
33
33
33
89
Technical information
NCS
NCS
air flow rate (m3/h)
2
907
1566
1912
2506
3059
3445
4206
4966
6415
7582
9238
11370
13582
17055
20609
24618
29711
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Air handling units with 25 mm thick panels.
Air flow rate from 1,000 to 45,000 m3/h
2,5
1134
1958
2390
3132
3823
4307
5257
6207
8019
9477
11548
14213
16978
21319
25761
30772
37139
3
1361
2349
2867
3758
4588
5168
6308
7449
9623
11372
13857
17055
20373
25583
30913
36926
44566
3,5
1588
2741
3345
4385
5352
6029
7360
8690
11227
13268
16167
19898
23769
29847
36065
43081
51994
Vel.: Face velocity on the battery pack heat exchange
NCS
Characteristics
The NCS series of air handling units is a direct
descendant of the NCD series. They both offer
high quality components, versatile configurations, and a complete array of available sections
and accessories.
The NCS series of air handling units is notable
due to its use of 25 mm thick sandwich panels,
which are attached to the
frame using frame panels which do not require
screws. This system allows for uniform pressure
on the case, minimizing leakage.
Thanks to a modular construction and the wide
range of accessories, the designer is always able
to select the most appropriate unit for their precise installation type.
Main Characteristics
• Structure:
Aluminium sections with rounded edges and
reinforced nylon corners.
The case is made of sealing sandwich panels,
25 mm thick, attached to the frame using an
exclusive frame panel which does not require
any screws.
• Humidification systems
Chosen based on the specific intended use for
the unit, in conformance with the system chosen.
• Aluminium dampers
with aerofoil blades. Precise construction guarantees low leakage.
• Forward or backward curved fan blades.
The choice is made based on the requested
aeraulic performance, and with attention to
output and noise level.
• Filter systems
All types of filter systems generally used in air
handling units are available, all of which guarantee conformance with the current regulations
regarding environmental air quality.
• Silencers
Available in various lengths. Constructed of
rock wool, surfaces in contact with the air are
protected using polyester film and held inside a
micro-perforated galvanized steel sheet.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Width
684
1009
1171.5
1009
1171.5
1009
1171.5
1334
1659
1659
1984
1984
2309
1984
1984
2309
2309
External dimensions
Height*
521.5
521.5
521.5
684
684
846.5
846.5
846.5
846.5
1009
1009
1171.5
1171.5
1659
1984
1984
2309
Width
613
938
1100.5
938
1100.5
938
1100.5
1263
1588
1588
1913
1913
2238
1913
1913
2238
2238
Internal dimensions
Height
409.5
409.5
409.5
572
572
734.5
734.5
734.5
734.5
897
897
1059.5
1059.5
1547
1872
1872
2197
*declared external height does not include the base (120 mm)
• Heat exchange coils
can be removed on slides and are provided in •Various types of heat recovery systems
various materials based on usage and heating Make it possible to respect current energy
saving regulations.
system.
A vast array of accessories, which can be chosen using our selection programme. The programme also makes it possible to quickly design
a unit in real-time.
90
Cod.: SNCSUY.00 / 0912
Accessories
Technical data
NCT H
NCT H 2
NCT H 3
NCT H 4
NCT H 5
NCT H 6
NCT H 7
NCT H 8
NCT H 9
NCT H 10
NCT H 11
NCT H 12
NCT H 13
NCT H 14
NCT H 15
NCT H 16
Air handling units
With modular sections
Air flow rate m3/h
1800
2520
3130
3820
4500
5080
6230
7340
9470
10730
13860
17500
21300
25780
30780
Coil section m2
0,202
0,278
0,348
0,425
0,502
0,566
0,69
0,815
1,053
1,191
1,539
1,944
2,369
2,862
3,419
The performance levels refer to an air speed through the coils equal to 2.5 m/s.
Dimensions (mm)
Features
- suitable distances are maintained between the
humidification and the subsequent component;
- drop eliminators subjected to antibacterial treatment or made of stainless steel.
• Performance and safety characteristics:
- the unit performance levels are certified according to the Eurovent programme;
- the unit is supplied complete with all the electrical and electronic components for correct
operation, and therefore carries the EC mark
showing that it satisfies the safety requisites of
the relevant directives.
• Inspection and cleaning:
- access openings, drainage panels and adequate
lighting in every section;
- curved inner corners to avoid the accumulation
of dirt;
- edges and slits have been avoided and all per-
manent joints are sealed;
- the drainage outlets are fitted with easy-toinspect drain-taps.
• Panelling and inner surface:
- the precise frame-panelling coupling allows
you to reach casing air seepage values that fall
within class B of Standard UNI EN 1886, with
the certification of the TÜV laboratories;
- the materials used offer a good resistance to
cracking, splintering, flaking and abrasion, they
can be washed and disinfected, and they do not
favour the proliferation of biological agents or
agents that encourage bioburden reduction
(antibacterial treatment with certified bioburden
reduction).
NCT H 2
NCT H 3
NCT H 4
NCT H 5
NCT H 6
NCT H 7
NCT H 8
NCT H 9
NCT H 10
NCT H 11
NCT H 12
NCT H 13
NCT H 14
NCT H 15
NCT H 16
Section A
805
805
805
805
805
1125
1125
1125
1125
1445
1445
1765
1765
2085
2085
Section B
735
895
1055
1215
1375
1055
1215
1375
1695
1375
1695
1695
2015
2015
2335
Cod.: SNCTHUI.01 / 1009
• Fan sections, exchange coils, filters and external air intakes:
- plug fans for all sizes, in stainless steel or treated material, equipped with guides and supports reduced to a minimum;
- coils and heat recovery units in Cu/Cu, waterproof Cu/Cu, stainless steel/Cu or stainless steel/
stainless steel;
- class F7 filters positioned upstream and on the
pick-up points of the unit, class F8/F9 downstream (possibility to equip the unit with filters with
a germicidal capacity);
- external air intakes scaled for speeds of less
than 2m/s, and equipped with suitable protective means.
• Humidification, silencers, drop eliminators:
- steam humidification, either direct or with a
producer operating with immersed electrodes;
92
93
Technical data
NCD
NCD 1
NCD 2
NCD 3
NCD 4
NCD 5
NCD 6
NCD 7
NCD 8
NCD 9
NCD 10
NCD 11
NCD 12
NCD 13
NCD 14
NCD 15
NCD 16
NCD 17
NCD 18
NCD 19
NCD 20
NCD 21
NCD 22
NCD 23
NCD 24
Air handling units
Air flow rate m³/h
1.134
1.958
2.390
3.132
3.823
4.307
5.257
6.207
8.019
9.477
11.548
14.213
16.978
19.742
25.761
30.772
37.139
47.187
49.235
55.283
61.331
67.379
73.427
79.475
Coil section m2
0,13
0,22
0,27
0,35
0,42
0,48
0,58
0,69
0,89
1,05
1,28
1,58
1,89
2,19
2,86
3,42
4,13
4,8
5,47
6,14
6,81
7,49
8,16
8,83
The performance refers to an air speed through the coils equal to 2.5 m/s.
Features
Main Features
Structure:
• In aluminium sections with rounded edges
both internally and externally allowing greater cleanliness
• New panelling and gaskets, able to guarantee
reduced seepage in compliance with the
EN1886 Standard
• Reduction of noise emission thanks to the use
of material with high sound-absorption
power.
• Small dimensions and contained height.
Large availability of filters:
Filters with large surfaces to reduce the pressure drops and increase the duration
- Cell pre-filters
- Roll filters
- Bag filters
Internal components:
- Absolute filters
• New high-efficiency heat exchangers with - Activated carbon filters
small pressure drops
- Germicidal lamp
• Mixing chamber with three dampers
The configurations for the mixing chambers • New efficient drop eliminator in PVC
with three dampers are the following:
• New heat recoverers with high heat exchange
- two upper dampers and an internal one for recirculation;
- two front dampers and a horizontal one Electric components
for recirculation (for overlapping control • Electronic regulation available able to optimiunits);
se the performance and simplify installation
- two lateral internal dampers and an internal
of the control unit itself
for recirculation (configuration for expulsion • New high performance selection software.
and non-ducted fresh air intake)
Accessories
Wide range of accessories among which:
- Technical rooms
Accessories for air intake/exhaust sections:
-flange;
- blank panel (to be perforated with care by the
customer);
- anti-vibration sheet on the intake/flow vents
(with or without damper) with earth cable;
- aluminium grille (for internal dampers only);
- manual command on the dampers;
- proportional servo-control;
94
- proportional servo-control with spring return;
- pedestrian grill on the floor dampers.
Accessories for the fan-motor sections:
- Damper on the flow vent;
- overpressure damper;
- micro switch on the inspection hatch;
Accessories common to several sections:
- Spot light with window with 24V bulb (the
installer must envision the 24V power supply);
- manometer with dial;
- pressure switch;
- instruments-probes holder GJ 1/4" double
sleeve;
- floor reinforced with non-slip sheet steel.
A
B
NCD 1
NCD 2
NCD 3
NCD 4
NCD 5
NCD 6
NCD 7
NCD 8
NCD 9
NCD 10
NCD 11
NCD 12
NCD 13
NCD 14
NCD 15
NCD 16
NCD 17
NCD 18
NCD 19
NCD 20
NCD 21
NCD 22
NCD 23
NCD 24
Section A
645
645
645
805
805
965
965
965
965
1.130
1.130
1.285
1.285
1.285
2.085
2.085
2.405
2.405
2.405
2.405
2.405
2.405
2.405
2405
Section B
735
1055
1215
1055
1215
1055
1215
1375
1695
1695
2015
2015
2335
2655
2015
2335
2335
2655
2975
3295
3615
3935
4255
4575
Cod.: SNCDUY.01 / 0912
• 24 sizes of central air handling units with
double panelling with panel thickness of 50
mm
• Support structure realised in aluminium alloy
sections and a large choice of panels.
• Wide range of sections and components to
satisfy all plant engineering requirements
• Double intake centrifugal fans with forward
or reverse blades.
• PLUG FAN type fan with Inverter regulation,
able to adapt to the most varied system requirements.
95
ANL
R410A
Accessory compatibility
Air cooled water chillers, heat pumps and condensing units with axial fans
Cooling capacity from 5.7 to 43.0 kW
Heating capacity from 6.2 to 46.0 kW
ANL
vers
20
25
30
40
50
70
80
90
100
150
200
PR3
(°) - H - C
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
MODU-485A
All
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
AERWEB300
DRE 1
All
(°) - H - C
(°) - C
H
(°) - H - HP - C
A
A
(°) / P
A
(°) / P
A
✔
50
51
9
9
✔
50
51
9
9
✔
50
51
9
9
✔
50
51
9
9
✔
5
50
51
9
15
✔
5
50
51
9
15
✔
5
50
51
9
15
✔
5
50
51
9
15
✔
5 x2
52
53
15
15
✔
5 x2
52
53
15
15
✔
5 x2
52
53
15
15
✔
5
5
2
-
✔
5
5
2
-
✔
5
5
2
-
✔
5
5
2
-
✔
5
6
2
2
✔
5
6
2
2
✔
5
6
2
2
✔
5
6
2
2
✔
2
2
✔
2
2
✔
2
2
DCPX
VT
RA 3
BDX
KR2 3
1 Only available for 400V/3N power
supply. Factory fitted only.
2 Not available for sizes
ANL 020…040°A | HA.
3 Factory fitted only.
x2 Quantity to be ordered
Unit Configurator
By suitably combining the numerous options available it is possible to configure each model in such a way as to meet the most particular of system
Configuration fields:
pump
•standard version
•option for water •ability to produce pump
domEstic hot water (D.H.W.)
•option for water pump and buffer tank
•option for high head Features
ANL Q: Version with high head pump and
buffer tank
ANL C: Condensing unit (without evaporator)
• All versions, except the condensing unit (C)
and the desuperheater option (D), can be
requested to produce low leaving liquid temperature from 4 °C down to -6 °C.
• High efficiency scroll compressors with low
power input
• Differential pressure switch / flow switch as
standard supply
• Electronic controller (Modu_control)
• High efficiency heat exchangers
• Axial flow fan units for extremely quiet operation
• Metallic protective cabinet with anti-corrosion polyester paint
• BDX: Condensate drip tray for outdoor unit
with screened cable.
• DCPX: Low temperature device for correct • MODU-485A: RS-485 interface for supervicooling mode operation with ambient temsion systems with MODBUS protocol.
peratures from less than 20 °C down to - 10 • AERWEB300: The AERWEB option allows
°C.
remote control of a chiller through a stand• DRE: Electronic soft starter device reducing
ard PC and an ethernet connection with a
starting current by about 30%. Only available
standard browser; 4 versions available:
for three-phase models. Factory fitted only.
AERWEB300-6: Web server to monitor and
• KR: Anti-freeze electric heater for the plate
remote control maximum 6 units on RS485
heat exchanger, not available for sizes 020Anetwork;
HA to 040A-HA. Factory fitted only.
• PR3: Simplified remote panel. Permits control
network;
of the basic unit functions (on/off and change
AERWEB300-6G: Web server to monitor and
of operating mode, diagnostics and alarm
reset). Maximum distance permitted is 150 m
network with integrated GPRS modem;
network with integrated GPRS modem.
• RA: Anti-freeze electric heater for the buffer
tank. Factory fitted only.
• VT: Anti-vibration mounts.
• Compatibility with the VMF system
VMF-CRP
VMF-VOC
VMF-ACS
VMF-E5B|N
For further system information please refer
to the specific documentation.
• Cooling only, heat pump, and condensing
unit models
• Available in 5 versions:
ANL: Standard Version
ANL P: Version fitted with water pump,
expansion vessel, water filter
ANL N: Version with high head pump
ANL A: Version fitted with water pump,
expansion vessel, water filter, and buffer tank
1 2 3
4 5 6
7
8
9
10
11
12
13
|||||||||
Code
|
Model
|
Heat recovery
|
Field of use
|
Power supply
||||
Size VersionCoil fins
Evaporator
Code:
ANL
Size :
020, 025, 030, 041, 050, 070, 080, 090, 100, 150, 200
Model:
° - Cooling only
H - Heat pump
Version:
° - Standard
P -With pump
N -With high pump (from sizes 100 to 200)
A - With pump and buffer tank
Q - With buffer tank and high head pump (from sizes 050 to 200)
Heat recovery:
° - Without heat recovery
D - With desuperheater (partial heat recovery)*
Coil fins:
° - Aluminium
R - Copper
S - Tinned copper
V - Epoxy coated aluminium
Field of use:
° - Standard leaving water temperature down to 4°C
Z - Low leaving liquid, from 4°C down to up to 0°C
Y - Low leaving liquid from 0°C down to -6°C
Evaporator :
° - Standard
C -Condensing unit (without evaporator)
Power supply:
M - 230V ~ 50Hz (only for sizes 020 to 040)
° - 400V 3N~ 50Hz
Accessories
98
Attention:
– Z-Y = these options apply exclusively to cooling only models
– standard options are shown by symbol °
– heat pump model not available as condensing unit version (field 7: option H; field 12: option C)
– single phase power supply (field 13: option M) is available only for sizes 020 - 025 - 030 - 040
– * The desuperheater is available for sizes from 050 to 090 only with buffer tank, whilst sizes from 100 to 200 are available in all versions.
Desuperheater is incompatible with the low temperature options, with the condensing unit version, and for dimensional reasons even with the
option Q.
Configuration code example: ANL090HAR
This is a an ANL unit, size 090, heat pump model, with buffer tank and pump, with copper condenser coil, with evaporator, and with electrical
panel for compressors with motors 3N~ 400V 50Hz. Note that as each option is precisely identified, it is not necessary to specify standard options
(indicated by ° ) in the configuration code.
99
Technical Data
Technical Data
Total input power
Total input current
230V/1
400V/3N
230V/1
400V/3N
400V/3N
Water flow rate
Pressure drop
Available head
EER
All
°
P|A
N|Q
°
°
P|A
P|A
N|Q
All
°
P|A
N|Q
°
P|A
N|Q
kW
kW
kW
kW
A
A
A
A
A
l/h
kPa
kPa
kPa
W/W
W/W
W/W
ESEER
Heating capacity
Total input power
Total input current
230V/1
400V/3N
230V/1
400V/3N
400V/3N
COP
Water flow rate
Pressure drop
Available head
Cooling capacity
Total input power
Total input current
230V/1
400V/3N
230V/1
400V/3N
400V/3N
EER
Water flow rate
Pressure drop
Available head
Cooling capacity
Total input power
Total input current
EER
Connections
Line gas
Line liquid
230V/1
400V/3N
020°
5,7
1,84
1,99
9,4
3,7
10,40
4,70
980
20
60
3,10
2,86
3,72
025°
6,2
2,00
2,15
10
4,2
11,00
5,20
1070
20
60
3,10
2,88
3,72
030°
7,5
2,46
2,61
13
4,7
14,00
5,70
1290
20
59
3,05
2,87
3,66
040°
9,6
3,25
3,4
16,3
6,2
17,30
7,20
1650
21
55
2,95
2,82
3,54
050°
13,4
4,03
4,30
4,48
8,7
10.7
11,40
2310
21
82
160
3,33
3,12
2,99
3,99
070°
16,5
4,88
5,15
5,33
9,7
11.7
12,40
2840
21
80
158
3,38
3,20
3,10
4,06
080°
20,5
6,33
6,60
6,78
12,2
14.2
14,90
3530
26
69
144
3,24
3,11
3,02
3,88
090°
22,3
6,63
6,90
7,08
12,8
14.8
15,50
3840
25
66
140
3,36
3,23
3,15
4,03
100°
26,6
8.40
9.20
9.40
16,7
17.9
18.7
4580
43
84
140
3,17
2,89
2,83
4,14
150°
33,0
10.00
11.50
11.30
18,8
20.8
21.4
5680
39
115
185
3,30
2,87
2,92
4,25
200°
43,0
13.70
15.20
15.00
25,7
27.7
28.3
7400
32
90
158
3,14
2,83
2,87
4,12
All
H
P|A
N|Q
H
H
P|A
P|A
N|Q
H
P|A
N|Q
All
H
P|A
N|Q
All
H
P|A
N|Q
H
H
P|A
P|A
N|Q
H
P|A
N|Q
All
H
P|A
N|Q
kW
kW
kW
kW
A
A
A
A
A
W/W
W/W
W/W
l/h
kPa
kPa
kPa
kW
kW
kW
kW
A
A
A
A
A
W/W
W/W
W/W
l/h
kPa
kPa
kPa
020H
6,2
1,91
2,06
10,4
3,8
10,4
4,8
3,25
3,01
1070
32
60
5,7
1,84
1,99
9,4
3,7
9,4
4,7
3,10
2,86
980
29
60
-
025H
7,0
2,12
2,27
11
4,4
12,3
5,4
3,30
3,08
1200
35
60
6,2
2
2,15
10
4,2
10
5,2
3,10
2,88
1070
30
60
-
030H
8,4
2,62
2,77
14
5,4
14
6,4
3,21
3,03
1450
35
59
7,5
2,46
2,61
13
4,7
13
5,7
3,05
2,87
1290
30
59
-
040H
10,6
3,18
3,33
17,3
6,8
19,3
7,8
3,33
3,18
1820
30
55
9,6
3,25
3,4
16,3
6,2
16,3
7,2
2,95
2,82
1650
27
55
-
050H
14
4,3
4,57
4,75
9,5
11,5
12,2
3,26
3,06
2,95
2410
30
82
160
13,4
4,03
4,3
4,48
8,7
10,7
11,4
3,33
3,12
2,99
2310
30
82
160
070H
17,3
4,9
5,17
5,35
10,3
12,3
13
3,53
3,35
3,23
2980
30
80
158
16,5
4,88
5,15
5,33
9,7
11,7
12,4
3,38
3,20
3,10
2840
30
80
158
080H
22,2
6,3
6,57
6,75
12,9
14,9
15,6
3,52
3,38
3,29
3820
38
69
144
20,5
6,33
6,6
6,78
12,2
14,2
14,9
3,24
3,11
3,02
3530
36
69
144
090H
24,2
6,85
7,12
7,3
13,8
15,8
16,5
3,53
3,40
3,32
4160
53
66
140
22,3
6,63
6,9
7,08
12,8
14,8
15,5
3,36
3,23
3,15
3840
50
66
140
100H
29,0
8,6
9.2
9.6
17
18,2
19,0
3,37
3,15
3,02
4990
52
84
142
26,0
8,6
9.2
9.6
17
18,2
19
3,02
2,83
2,71
4470
41
84
140
150H
35,0
10,1
11.1
11.4
19
21,0
21,6
3,47
3,15
3,07
6020
44
115
187
32,0
10,2
11.2
11.5
19,2
21,2
21,8
3,14
2,86
2,78
5500
37
115
185
200H
46,0
13,3
14.3
14.6
25
27,0
27,6
3,46
3,22
3,15
7910
37
90
162
42,0
13,9
14.9
15.2
26,2
28,2
28,8
3,02
2,82
2,76
7220
31
90
158
All
°
°
°
°
kW
kW
A
A
W/W
020C
5,7
1,85
9,50
3,70
3,08
025C
6,0
2,05
10,00
4,20
2,93
030C
7,5
2,5
13,00
4,70
3,00
040C
9,6
3,3
16,30
6,30
2,91
050C
13,7
4,1
8,90
3,34
070C
16,8
5
9,90
3,36
080C
20,8
6,5
12,40
3,20
090C
22,5
6,8
13,10
3,31
100C
26,9
8,6
17,10
3,13
150C
33,4
10,2
19,30
3,27
200C
43,7
14,1
26,40
3,10
Ø
Ø
15,88
9,52
15,88
9,52
15,88
12,7
15,88
12,7
22
15,88
22
15,88
22
15,88
28
15,88
28
15,88
28
15,88
35
15,88
DATA FOR ALL VERSIONS
Electrical data
Maximum current (FLA)
Starting current (LRA)
Protection rating
Compressors
Number / circuits
Capacity control
Refrigerant
Heat exchanger system side
Number
hydraulic connections
Buffer tank
Capacity
Fans
Number
Air flow rate cooling mode
Sound data
Sound pressure
Sound power
230V/1
400V/3N
230V/1
400V/3N
400V/3N
230V/1
400V/3N
230V/1
400V/3N
400V/3N
°
°
P|A
P|A
N|Q
°
°
P|A
P|A
N|Q
A
A
A
A
A
A
A
A
A
A
n°/n°
%
type
IN|OUT
Sound power
Aermec determines sound power values on the basis of
measurements made in accordance with ISO 9614-2, as
required for Eurovent certification.
020
025
030
040
050
070
080
090
100
150
200
16,50
6
17,5
7,00
59,5
26,5
60,5
27,5
-
16,50
6
17,5
7,00
62,5
32,5
63,5
33,5
-
19,70
6,7
20,7
7,70
83,7
35,7
84,7
36,7
-
23,70
8,7
24,7
9,70
98,7
48,7
99,7
49,7
-
11,3
13,30
14,0
65,3
67,3
68
16,3
18,30
19,0
102,3
104,3
105
17,3
19,30
20,0
96,3
98,3
99
22
23,4
24.8
76
77.4
78.8
26
28,8
29.5
87
89.8
90.5
34
36,8
37.5
117
119.8
120.5
1/1
1/1
1/1
13,5
15,50
16,2
75,3
77,3
78
IP24
scroll
1/1
1/1
1/1
2/1
2/1
0-50-100
2/1
1/1
1/1
0-100
R410A
n°
Ø
1
1"¼
1
1"¼
1
1"¼
1
1"¼
1
1"¼
1
1"¼
1
1"¼
1
1"¼
1
1"¼
1
1"¼
1
1"¼
l
25
25
35
35
75
75
75
75
100
100
100
n°
m3/h
1
2500
1
2500
1
3500
1
3500
2
7200
2
7200
2
7300
2
7200
2
13200
2
12000
2
12000
dB(A)
dB(A)
30
61
30
61
37
68
37
68
38
69
38
69
38
69
37
68
44
76
45
77
46
78
Sound pressure
Sound pressure in free field conditions over a reflective
plane (directivity factor Q=2) at 10 m distance from the
external surface of unit, in accordance with ISO 3744.
Dimensions (mm)
C
C
B
B
A
A
020 - 025 - 030 - 040
050 - 070 - 080 - 090
DIMENSIONS - WEIGHT
Height
Width
Depth
(without feet / with feet)
100 - 150 - 200
020
025
030
040
050
070
080
090
868
868
1000
1000
1252
1252
1252
1252
868
868
1015
1015
1281
1281
1281
1281
1281
1281
1281
1281
900
900
900
900
1124
1124
1124
1124
1124
1124
1124
1124
1165
1165
1165
1165
1165
1165
1165
1165
310/354 310/354 310/354 310/354 384/428 384/428 384/428 384/428
384/428 384/428 384/428 384/428 550
550
550
550
550
550
550
550
°|P|C
A
Q
°|P|C
A
Q
°|P|C
A
Q
mm
mm
mm
mm
mm
mm
mm
mm
mm
°
P
A
Q
C
kg
kg
kg
kg
kg
75
77
99
70
75
77
99
70
86
91
103
78
86
91
103
78
120
127
147
151
110
120
127
147
151
110
120
163
147
187
141
°
P
A
Q
kg
kg
kg
kg
75
77
99
-
75
77
99
-
86
91
103
-
86
91
103
-
120
127
147
151
120
127
147
151
120
163
147
187
100
150
200
1345
1345
1345
750
750
750
1750
1750
1750
156
163
183
187
141
270
288
293
314
329
350
338
364
400
156
163
183
187
295
313
363
423
322
343
393
447
358
379
429
457
Cooling only model
Weight
Heat pump model
COOLING
Evaporator water inlet
Evaporator water outlet
External air temperature 100
12°C
7°C
35 °C
HEATING
Condenser water inlet
40°C
Condenser water outlet
45°C
External air temperature 7 °C db / 6 °C wb
COOLING version C
Evaporating temperature
External air temperature 5°C
35 °C
Weight
101
Cod.: SANLUY.10 / 1201
Model
Cooling capacity
Accessories
ANLI
Air cooled chiller and heat pump with axial fans
Heating capacity (UNDER FLOOR HEATING) Heating capacity
(FAN COILS)
Cooling capacity
6.40 - 33.75 kW
6.10 - 31.70 kW
5.70 - 28.80 kW
Aermec
participates at EUROVENT
program: LCP/A/P/R.
The involved products can be found
in the website
• BDX5: Condensate drip tray for outdoor unit.
• BDX8/9: Condensate drip tray with integrated electric
resistance, managed by external air probe control.
• DCPX: Allows correct operation, in cooling mode,
with outside temperatures lower than 20 °C and as
low as – 10 °C, in heating mode up to 42 °C.
Accessory mandatory for the production of
domestic hot water (DHW) in summer mode (only
for some sizes, refer to the technical manual).
• KR: Electric anti-freeze resistance for plate heat exchanger.
Standard for sizes from 021 to 080 Can only be
applied in the factory.
• KRB: Electric anti-freeze resistance kit for base;
prevents the formation of ice on the base. Can
only be applied in the factory.
• PR3: Simplified remote panel. Allows to perform
the basic controls of the unit with alarm signals. It
can be controlled with a shielded cable at a
distance up to 150 m.
• MODU-485A: RS-485 interface for supervising
systems with MODBUS protocol.
• AERWEB300: Accessory AERWEB allows remote
control of a chiller through a common PC and an
ethernet connection over a common browser; 4
versions available:
AERWEB300-6: Web server to monitor and remote
control max. 6 units in RS485 network;
AERWEB300-18: Web server to monitor and remote control max. 18 units in RS485 network;
Available accessories
ANLI
vers.
remote control max. 6 units in RS485 network
with integrated GPRS modem;
• VT: Anti-vibration mounts.
COMPATIBILITY with VMF SYSTEM
• VMF-CRP
• VMF-VOC
• VMF-DHW
• VMF-E5B|N
For further information on system, refer to specific
documentation.
Available accessories
20
25
70
100
ANLI
21
26
40
45
71
75
80
PR3
✔
✔
✔
✔
PR3
vers.
✔
✔
✔
✔
✔
✔
✔
MODU-485A
✔
✔
✔
✔
MODU-485A
✔
✔
✔
✔
✔
✔
✔
AERWEB300
DCPX
VT
BDX
KR 1
BSK4KW230M
(°) / P / X
(°) / P / X
230V/1
✔
51
9
5
2
✔
51
9
5
2
✔
51
9
5
2
✔
51
9
9
2
✔
51
9
9
2
✔
(°) / P / X
(°) / P / X
230V/1
✔
51
9
8
1
✔
AERWEB300
DCPX
VT
BDX 1
KRB 1
BSK4KW230M
✔
51
9
8
1
✔
✔
53
15
2
-
✔
✔
✔
✔
✔
51
9
9
2
-
✔
51
9
9
2
-
✔
51
9
9
2
-
BSK6KW230M
230V/1
✔
-
BSK6KW230M
230V/1
400V/3N
✔
-
✔
-
-
BSK6KW400VT
✔
-
-
✔
✔
-
-
400V/3N
✔
-
-
BSK6KW400VT
✔
-
✔
✔
✔
BSK9KW400VT
400V/3N
-
-
-
✔
BSK9KW400VT
400V/3N
-
-
-
-
✔
✔
✔
1Factory fitted only.
Unit Configurator
By suitably combining the numerous options available it is possible to configure each model in such a way as to meet the most demanding of system
requirements.
•INVERTER COMPRESSOR
•Standard version
•Version with ON/OFF PUMP OR INVERTER
Characteristics
• Refrigerant R410A
• High efficiency at partial load
• Capable of variable water flow rates on primary
circuit (terminals with 2-way valves)
• Perfect water temperature control even in
systems with low water content
• Suitable for heat pump mode summer operation
to provide domestic hot water (DHW) with the
DCPX fan speed controller accessory
• Extended operating limits in heat pump mode
ANLI 020 - 025 - 070 - 100:
1. Maximum leaving water temperature 55 °C
2. Maximum external air temperature 42 °C
(with DCPX fan speed controller accessory)
3. Minimum external air temperature -15 °C
ANLI 021 - 026 - 040 - 045 - 071 - 075 - 080:
1. Maximum leaving water temperature 60 °C
2. Maximum external air temperature 42 °C
(with DCPX fan speed controller accessory)
3. Minimum external air temperature -20 °C
• Reduced starting currents
• Dual-flow electronic expansion valve with autoadaptive algorithm controlling superheat,
suitable for leaving liquid temperatures:
1. down to -6 °C for ANLI 020 - 025 - 070 - 100
down to -8 °C for ANLI 021 - 026 - 040 045 - 071 - 075 - 080
• High efficiency scroll and Twin rotary
compressors with permanent magnet DC motors
of "high side" type (with high pressure casing),
designed for variable speed operation
• Integral pump:
- ANLI: standard without pump
- ANLI P: on/off pump
- ANLI X: variable speed pump with water side
pressure transducer installed and unit mounted
microprocessor, capable of controlling various
operating modes:
Constant ∆P: maintains constant pressure
differential between pump inlet and outlet;
pump speed reduces as terminal valves close
Variable ∆P: reduces pressure differential with
flow reduction, in consideration of the pressure
reduction in the pipe-work system to the
terminals (recommended for larger pipe-work
systems)
• Water filter, differential pressure switch or flow
switch, depending on the model, fitted on all
units.
• Expansion tank and pressure safety valve (only
2.
units with pump)
• Available in heat pump version only
• Fitted with EMC filters
• Controller:
- Aermec Modu_Control circuit board
- User interface with 6 soft-touch keys, 4 digit
display, 6 LEDs
- Control of the leaving water temperature with
PID algorithm
- Set-point compensation based on the external
air temperature
- Display of operating frequency
- Control of compressor ramp speed
- Auto-adaptive intelligent defrosting
- Condensing control in summer with a 0-10 V
modulating signal based on pressure and
compensated for external air temperature (with
DCPX accessory
- Load limiting safety control by reducing
compressor speed
- High and low pressure transducers
- Automatic reset of alarms before tripping
- Alarms history
1 2 3 4
5 6 7
8
9
10
11
12
13
14
|||||||||
Code
|
Model
|
Heat recovery
|
Field of use
|
Power supply
||||
Size
VersionCoil
Evaporator
Code:
ANLI
Size:
020 - 025 - 070 - 100
021 - 026 - 040 - 045 - 071 - 075 - 080
Model:
H - Heat Pump
Version:
° - Standard (without pump)
P - With ON/OFF pump
X - With inverter pump
Heat recovery:
Coil:
° - Aluminium
R - Copper
S - Tinned copper
V - Coated aluminium
Field of use:
° - Standard for leaving liquid temperature down to -6 °C for sizes
020 - 025 - 070 - 100
- Standard for leaving liquid temperature down to -8 °C for sizes
021 - 026 - 040 - 045 - 071 - 075 - 080
Evaporator:
° - Standard PED regulations
Power supply:
M - 230V/1/50Hz sizes 020 - 025 - 070 | 021- 026 - 040 - 045
T - 400V/3N/50Hz sizes 100 | 071 - 075 - 080
Attention:
– Single-phase power supply (field 14: option M) is available only for sizes 020 - 025 - 070 | 021- 026 - 040 - 045.
Example of a configuration code: ANLI100H°°°°°T
This is an ANLI unit, size 100, heat pump model, standard (without pump), without heat recovery, aluminium condenser coil, standard field of use,
standard evaporator, and electrical panel for compressors with 400V/3N/50Hz motors.
102
103
Technical data
ANLI
020H
Heating mode: water 40/45 °C - air 7 °C db / 6 °C wb (fan coils)
H
kW
6.18
Heating capacity
HP|HX
kW
6.1
H
kW
2.08
Input power
HP|HX
kW
2.1
H
A
10.1
Total input current
HP|HX
A
10.6|10.6
H
W/W
2.97
COP
HP|HX
W/W
2.90
H
l/h
1063
Water flow rate
HP|HX
l/h
1049
Pressure drops
H
kPa
25
Heating mode: water 30/35°C - air 7°C d.b./6°C w.b. (floor heating)
H
kW
6.48
Heating capacity
HP|HX
6.40
H
kW
1.72
Input power
HP|HX
kW
1.74
H
A
8.4
Total input current
HP|HX
A
8.9|8.9
H
W/W
3.77
COP
HP|HX
W/W
3.68
H
l/h
1114
Water flow rate
HP|HX
l/h
1100
Pressure drops
H
kPa
28
Cooling mode water 12/7°C - external air 35°C
H
kW
5.88
Cooling capacity
HP|HX
5.95
H
kW
2.12
Input power
HP|HX
kW
2.14
H
A
10.3
Total input current
HP|HX
A
10.8|10.8
H
W/W
2.77
EER
HP|HX
W/W
2.78
H
3.58
ESEER
HP
3.36
HX
3.65
H
l/h
1011
Water flow rate
HP|HX
l/h
1023
Pressure drops
H
kPa
23
Available head
HP|HX
kPa
57-57
COMMON DATA FOR ALL VERSIONS
Electrical data
H
A
14.0
HP|HX
A
14.5-14.5
H
A
20.0
HP|HX
A
20.5-20.5
Protection rating
Compressor
Quantity/circuit
n°
1|1
Partializations
%
System side heat exchanger
Quantity
n°
1
Hydraulic connections
ø
1"1/4
Fans
quantity
n°
1
Air flow rate in cooling mode
m3/h
2500
Sound data
Sound pressure
dB(A)
29.0
Sound power
dB(A)
61.0
F1
100H
F2
F3
7.31
7.21
2.33
2.35
11.3
11.8
3.14
3.07
1257
1241
29
14.04
13.81
4.44
4.48
19.1
20.5|19.8
3.16
3.08
2415
2376
17
31.7
31.0
11.4
11.45
15.7
17.1
2.78
2.71
5452
5332
59
24.95
24.3
8.34
8.35
11.5
12.9
2.99
2.91
4291
4179
36
20.08
19.54
6.36
6.38
8.8
10.2
3.16
3.06
3454
3362
23
7.66
7.59
1.93
1.94
9.4
9.9
3.97
3.91
1318
1306
32
14.54
14.31
3.74
3.78
16
17.4|16.7
3.89
3.79
2502
2462
19
33.75
33.01
9.85
9.86
13.4
14.8
3.43
3.35
5805
5678
66
25.34
24.65
7.05
7.06
9.6
11
3.59
3.49
4359
4239
37
20.87
20.32
5.44
5.46
7.4
8.8
3.84
3.72
3590
3494
28
6.42
6.5
2.42
2.44
10.9
11.4
2.65
2.66
3.54
3.60
3.91
1104
1117
29
52-52
14.56
14.79
4.44
4.48
18.9
20.3|19.6
3.28
3.30
4.39
4.45
4.73
2504
2544
19
82-72
28.77
29.43
11.73
11.82
16.3
17.7
2.45
2.49
4.11
4.40
4.40
4948
5061
50
23.95
24.53
8.14
8.31
11.3
12.7
2.94
2.95
4.11
4.40
4.40
4120
4219
30
92
20.03
20.23
6
5.8
8.3
9.7
3.34
3.49
4.11
4.40
4.40
3445
3480
24
14.0
14.5
20.0
20.5
24.5
25.9-25.2
25.0
26.4-25.7
21.0
22.4
30.0
31.4-30.7
21.0
22.4
30.0
31.4-30.7
21.0
22.4
30.0
31.4-30.7
1|1
1|1
1|1
1
1"1/4
1
1"1/4
1
1"1/4
IP24
SCROLL
1|1
1|1
35-100
PLATES
1
1"1/4
1
1"1/4
AXIAL
1
3500
2
7200
2
13200
37.0
68.0
37.0
69.0
44.0
76.0
310
900
384
750
1800
1750
1124
ANLI
021H
Heating mode: water 40/45°C - air 7°C d.b./6°C w.b. (fan coils)
H
kW
6.23
Heating capacity
HP
kW
6.17
HX
kW
6.17
H
kW
1.93
Input power
HP
kW
1.95
HX
kW
1.89
H
W/W
3.23
COP
HP
W/W
3.16
HX
W/W
3.27
Water flow rate
ALL
l/h
1066
Pressure drop
H
kPa
11
Heating mode: water 30/35°C - air 7°C d.b./6°C w.b. (floor heating)
H
kW
6.58
Heating capacity
HP
kW
6.52
HX
kW
6.49
H
kW
1.63
Input power
HP
kW
1.64
HX
kW
1.58
H
A
6.7
Total input current
HP
A
7.5
HX
A
7.2
H
W/W
4.04
COP
HP
W/W
3.97
HX
W/W
4.11
Water flow rate
ALL
l/h
1126
Pressure drop
H
kPa
13
HP
kPa
69
Available head
HX
kPa
61
Cooling mode water 12/7°C - external air 35°C
H
kW
5.71
Cooling capacity
HP
kW
5.76
HX
kW
5.79
H
kW
1.93
Input power
HP
kW
1.96
HX
kW
1.90
H
A
8.4
Total input current
HP
A
9.2
HX
A
8.9
H
W/W
2.95
EER
HP
W/W
2.94
HX
W/W
3.05
H
4.15
ESEER
HP
4.11
HX
4.38
Water flow rate
ALL
l/h
986
Pressure drop
H
kPa
11
COMMON DATA FOR ALL VERSIONS
Electrical data
H
A
12.1
H
A
8.0
Protection rating
Compressor
Quantity/circuit
n°
1/1
Partializations
%
33-100
Quantity
n°
1
ø
1"1/4
Fans
quantity
1
Air flow rate in cooling mode
m3/h
3500
Sound data
Sound pressure
dB(A)
31
Sound power
dB(A)
62
026H
040H
045H
071H
075H
080H
7.79
7.70
7.71
2.45
2.45
2.39
3.17
3.15
3.23
1331
18
9.91
9.81
9.82
3.17
3.15
3.09
3.13
3.12
3.18
1697
12
12.75
12.60
12.61
4.22
4.16
4.10
3.02
3.03
3.08
2180
20
15.16
15.02
15.03
4.85
4.87
4.69
3.12
3.08
3.20
2594
18
17.60
17.42
17.45
6.07
6.05
5.90
2.90
2.88
2.96
3009
24
20.12
19.92
19.97
7.27
7.24
7.10
2.77
2.75
2.81
3436
32
8.17
8.08
8.05
2.07
2.06
2.00
8.6
9.4
9.1
3.94
3.91
4.03
1395
20
61
54
10.49
10.39
10.35
2.68
2.65
2.58
11.4
12.2
11.9
3.92
3.92
4.01
1796
14
65
59
12.91
12.78
12.73
3.54
3.50
3.42
15.1
15.9
15.6
3.64
3.65
3.72
2207
20
56
51
16.18
16.04
15.95
4.09
4.10
3.91
6.1
7.7
6.8
3.96
3.91
4.08
2768
21
78
70
18.56
18.40
18.32
5.09
5.08
4.91
7.6
9.2
8.3
3.65
3.62
3.73
3172
28
69
55
20.98
20.81
20.73
6.11
6.10
5.93
9.0
10.7
9.7
3.44
3.41
3.50
3582
35
59
37
7.26
7.34
7.37
2.58
2.57
2.51
11.2
12.0
11.7
2.82
2.85
2.93
4.10
4.29
4.54
1256
16
9.39
9.49
9.51
3.17
3.15
3.09
13.7
14.5
14.2
2.97
3.01
3.08
4.06
4.22
4.36
1622
12
12.25
12.39
12.41
4.37
4.32
4.26
19.1
19.9
19.6
2.80
2.87
2.92
4.10
4.40
4.47
2119
19
13.66
13.79
13.88
4.80
4.84
4.66
7.3
8.9
8.0
2.84
2.85
2.98
4.20
4.19
4.65
2363
18
16.35
16.52
16.59
6.16
6.15
5.99
9.4
11.0
10.1
2.66
2.69
2.77
4.17
4.33
4.65
2831
25
18.51
18.70
18.75
7.63
7.60
7.45
11.4
13.1
12.2
2.43
2.46
2.52
4.12
4.34
4.59
3207
32
14.1
8.0
20.0
10.0
23.6
10.0
IP24
12.5
15.0
13.5
15.0
15.0
15.0
1/1
27-100
1/1
37-100
1/1
34-100
1/1
28-100
1/1
25-100
1
1"1/4
1
1"1/4
1
1"1/4
1
1"1/4
1
1"1/4
1
3500
2
8000
1/1
30-100
PLATES
1
1"1/4
AXIAL
2
8000
2
7500
2
7500
2
7500
32.5
63.5
35.7
66.7
36.7
67.7
36.7
67.7
38
69
38
69
354
020H - 025H
1390
1252
104
070H
868
DATA DECLARED IN ACCORDANCE WITH THE STANDARD
UNI EN 14511-2 2011
SINCE FOR THE ANLI 100 MODEL THE COMPRESSOR
CONTROL RANGE IS WIDER THAN PREVIOUS MODELS,
THE FOLLOWING DATA IS PROVIDED IN THE
DECLARATION OF PERFORMANCE:
FREQUENCY F1 – MAXIMUM PERFORMANCE
FREQUENCY F2 – PERFORMANCE COMPLIANT WITH
FRENCH STANDARD NF 414
FREQUENCY F3 – INTERMEDIATE PERFORMANCE
Sound power: Aermec determines the value based on the
measurements made in accordance with ISO 9614 - 2, as
required by Eurovent.
Sound Pressure: measured in free field conditions at a
distance of 10 m and directivity factor = 2. In accordance
with the ISO 3744.
025H
A
A
428
070H
ANLI
Empty weight
A
100H
H
HP|HX
kg
kg
020H 025H 070H 100H
70
70
134 293
72
72
141 308
B
021H - 026H
C
B
040H - 045H
C
B
C
ANLI
Height
Width
Depth
Empty weight
H
HP|HX
mm
mm
mm
kg
kg
all
all
all
021H 026H 040H 045H 071H
1028 1028 1281 1281 1281
1000 1000 1000 1000 1150
400 400 450 450 450
118 118 138 138 174
123 123 143 143 184
075H
1281
1150
450
174
184
080H
1281
1150
450
174
184
071H - 075H - 080H
105
Code: SANLIUY.05 / 1203
Technical Data
Choice of Unit
ANF
AIR/WATER heat pumps with axial flow fans
Avec ventilateurs axiaux et puissance (thermique)
Heating capacity (UNDERFLOOR HEATING) from 6,69 to 41,75 kW
Heating capacity (FAN COILS) from 6,65 to 41,26 kW
Cooling capacity from 5,4 to 36,7 kW
R407C
requirements.
Field configurer:
1 2 3
4 5 6
7
8
9
10
11
|||||||
Code
|
Model
|
Batteries
|
Power Supply
|||
Size VersionEvaporator
Code:
ANF
Size:
015, 020, 025, 030, 045, 050, 085, 095, 100, 165
Batteries:
° - In aluminium
R - Copper
S - Tinned copper
V - In varnished aluminium
Model:
H - Heat pump
Evaporator:
° - According to PED standards
Version:
° - Standard
Power supply:
° - 400V 3N ~50Hz
M - 230V ~ 50Hz (only for size 015, 020, 025, 030)
Warning:
– the standard options are shown by the symbol °;
•
•
•
•
Optimised for operation in heat pump mode
Single and three-phase tandem compressors
PRODUCTION OF HOT WATER UP TO 50°C WITH AN OUTSIDE TEMPERATURE
OF -5°C
FIELD OF APPLICATION FROM -15°C TO 20 °C OUTSIDE AIR TEMPERATURE
(46°C with dcpx accessories)
Example of commercial code: ANF100H°R°°
This is an ANF unit, size 100 with R407C refrigerant gas, heat pump type, standard, with condensing coils made of copper, with evaporator and with
electric panel for compressors with motors 3N~ 400V 50Hz.
As you can see, each option is represented in a unique way from all the others, so it is not necessary to indicate (within the commercial code) the
standard options (identified by °).
15
Characteristics
• Maximum safety under all working conditions. These heat pumps can produce hot
water up to 50°C. They can also operate with
outdoor temperatures between -15°C and
42°C,(20 °C - 42 °C with DCPX accessoire)
always ensuring continuous operation.
• Available in 10 sizes.
• Scroll compressors with high capacity and
low electrical power consumption.
• Differential pressure switch supplied as stan- • Softstart, electronic starting current reduction
device (standard for single phase versions).
dard.
•Electronic control card (modu control) with • Axial flow fans for quiet operation.
start-up timing and management of defrosting • The units are characterised by reduced
cycles.
dimensions and are varnished with polyester
• Electric heater for the compressor casing.
powder to protect them against atmospheric
• Résistance électrique pour l’échangeur à plaagents.
ques.
• High efficiency heat exchangers.
DRE 5
DRE 10
DRE 15
AERWEB300
BDX 5
BDX 6
DCPX 51
DCPX53
PR3
VT 9
VT 15
20
25
Accessoires disponibles
30
45
✔
50
✔
85
✔
95
100
165
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Accessories
remote with shielded cable up to 150 m.
remote control max. 6 units in RS485 net• BDX: Condensate drip tray for outdoor unit.
work with integrated GPRS modem;
• DRE: Electronic starting current reduction • AERWEB300: Accessory AERWEB allows
device for three-phase versions. Can only be
remote control of a chiller through a comremote control max. 18 units in RS485 netapplied in the factory.
mon PC and an ethernet connection over a
• DCPX: Compulsory accessory on heat pumps
common browser; 4 versions available:
for the production of hot sanitary water AERWEB300-6: Web server to monitor and • VT: Shock absorbers.
(A.C.S.). Necessary to produce sanitary water
remote control max. 6 units in RS485 netin Summer with external temperature up to
work;
42°C.
• PR3: Simplified remote panel. This makes it
remote control max. 18 units in RS485 netpossible to carry out the unit's basic controls
work;
with the signalling of alarms. Can be made
106
107
Technical data
Mod. ANF
Heating capacity (kW) (1)
Total input power (kW) (1)
COP (1)
Total input current (A) (1)
Water flow rate (l/h) (1)
Pressure drop (kPa) (1)
Heating capacity (kW) (2)
Total input power (kW) (2)
COP (2)
Total input current (A) (2)
Water flow rate (l/h) (2)
Pressure drop (kPa) (2)
Cooling capacity (kW) (3)
Total input power (kW)
EER (kW/kW) (3)
Total input current (A)
Water flow rate (l/h)
Pressure drops (kPa)
FLA (A)
LRA (A)
 Sound pressure - db(A)
 Sound power - db(A)
Air flow rate (m3/h)
Hydraulic couplings
Dimensions (mm)
Version
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
230V - 1
400V - 3
Toutes
Toutes
Toutes
(IN)
(OUT)
015H
6,86
6,69
2,03
1,94
3,38
3,45
11,5
3,9
1.180
1.150
7
6,5
6,8
6,65
2,4
2,27
2,83
2,93
12,7
4,3
1.170
1.145
7
6,5
5,5
5,4
2,4
2,3
2,26
2,3
12,7
4,6
945
930
5
5
18,7
7,1
45
33
29
61
2.500
M1”
M1”
020H
7,5
7,28
2,15
2,07
3,49
3,52
11,5
4
1.290
1.250
8
7,5
7,39
7,24
2,49
2,46
2,97
2,94
13
4,4
1.270
1.245
8
7,5
5,9
6
2,5
2,3
2,37
2,6
12,1
5,1
1.015
1.030
6
6
18,2
8,4
45
41
36
68
3.300
M1”
M1”
025H
9,45
9,16
2,8
2,5
3,38
3,66
15,5
5,2
1.630
1.580
60
56
9,31
9,11
3,2
2,98
2,91
3,06
17
5,8
1.600
1.570
58
55
7,5
7,4
3,2
3,1
2,38
2,4
16,7
6,2
1.290
1.270
43
43
24,5
9,9
45
48
36
68
3.450
M1”
M1”
030H
11,06
10,77
3,18
3,03
3,48
3,55
16,8
5,8
1.900
1.850
49
46,5
10,96
10,71
3,72
3,61
2,95
2,97
19,3
6,6
1.885
1.840
48,5
46
8,8
8,8
3,7
3,6
2,37
2,5
17,8
6,3
1.510
1.515
36
36
27,5
12
45
54
33
65
5.300
M1”
M1”
045H
n.d.
13,25
n.d.
3,68
n.d.
3,6
n.d.
7,8
n.d.
2.260
n.d.
47
n.d.
13,3
n.d.
4,5
n.d.
2,96
n.d.
8,7
n.d.
2.280
n.d.
48
n.d.
11
n.d.
4,6
n.d.
2,4
n.d.
9,1
n.d.
1.890
n.d.
36
n.d.
10,6
n.d.
66
37
69
7.000
M1”
M1”
050H
n.d.
15,64
n.d.
4,41
n.d.
3,55
n.d.
8,4
n.d.
2.690
n.d.
32
n.d.
15,42
n.d.
5,11
n.d.
3,02
n.d.
9,4
n.d.
2.655
n.d.
31
n.d.
12,4
n.d.
5,2
n.d.
2,4
n.d.
10
n.d.
2.130
n.d.
23
n.d.
13,2
n.d.
78
37
69
6.700
M1”
M1”
085H
n.d.
20
n.d.
5,81
n.d.
3,44
n.d.
11,7
n.d.
3.440
n.d.
37
n.d.
19,55
n.d.
6,52
n.d.
3
n.d.
12,5
n.d.
3.365
n.d.
35,5
n.d.
15,7
n.d.
6,7
n.d.
2,4
n.d.
13,3
n.d.
2.700
n.d.
27
n.d.
17
n.d.
101
36
68
6.450
M1”
M1”
095H
n.d.
28,09
n.d.
8,13
n.d.
3,46
n.d.
16,7
n.d.
4.830
n.d.
40
n.d.
27,66
n.d.
9,12
n.d.
3,03
n.d.
18
n.d.
4.760
n.d.
39
n.d.
26
n.d.
9,3
n.d.
2,8
n.d.
19,1
n.d.
4.470
n.d.
29
n.d.
22
n.d.
132
44
76
13.450
M1”
M1”
100H
n.d.
34,39
n.d.
10,14
n.d.
3,39
n.d.
18,3
n.d.
5.910
n.d.
38
n.d.
33,87
n.d.
11,18
n.d.
3,03
n.d.
20,1
n.d.
5.825
n.d.
37
n.d.
30,3
n.d.
11,7
n.d.
2,6
n.d.
21,5
n.d.
5.210
n.d.
28
n.d.
29,5
n.d.
172
45
77
12.400
M1”
M1”
165H
n.d.
41,75
n.d.
11,92
n.d.
3,5
n.d.
24,1
n.d.
7.180
n.d.
56
n.d.
41,26
n.d.
13,57
n.d.
3,04
n.d.
26,3
n.d.
7.095
n.d.
54,9
n.d.
36,7
n.d.
14,3
n.d.
2,6
n.d.
27,1
n.d.
6.310
n.d.
41
n.d.
37
n.d.
203
46
78
12.000
M1”
M1”
C
C
B
B
A
A
015 - 020 - 025
045 - 050 - 085
030 - 045 - 050
ANF H
Height
Width
Depth
Weights
B
C
kg
15
A
900
352
78
20
850
900
352
81
095- 100 - 165
25
850
900
352
85
30
1.000
1.120
435
128
45
1.250
1.120
435
129
50
1.250
1.120
435
137
85
1.250
1.167
555
252
95
1.580
1.750
750
314
100
1.345
1.750
750
353
165
1.345
1.750
750
394
Data stated according to EN14511:2004
Cod.: SANFUY.01 / 1202
Heat mode (1)
(UNDERFLOOR HEATING)
- température de l'eau en sortie 35 °C;
- température de l'air extérieur 7° B.S. / 6 °C B.U.;
- ∆t = 5 °C.
Heat mode (2)
(FAN COILS)
- température de l'eau en sortie 45 °C;
- température de l'air extérieur 7° B.S. / 6 °C B.U.;
- ∆t = 5 °C.
Refroidissement (3):
- Température de l’eau a la sortie
7 °C
- Température extérieure
35 °C
- ∆t = 5 °C.
Pression sonore mesurée en champ libre à une distance frontale de
10 m et avec un facteur de direction 2.
108
109
ANR
Air cooled heat pump with axial fans
Heating capacity (UNDERFLOOR HEATING) from 13.54 kW to 21.49 kW
Heating capacity (FAN COILS) from 12.83 kW to 20.34 kW
Cooling capacity from 11.90 kW to 18.10 kW
R407C
Standard
ANR 0502H
ANR 0802H
ANR 0902H
With pump
ANR 0502HP
ANR 0802HP
ANR 0902HP
With buffer tank
ANR 0502HA
ANR 0802HA
ANR 0902HA
DCPX
4
4
4
PR3
4
4
4
standard
standard
standard
4
4
4
4
4
4
With buffer tank + electric heater
ANR 0502HK
4
ANR 0802HK
4
ANR 0902HK
4
Aermec participates in the
EUROVENT
programme: LCP/A/P/R.
The products involved can be found
at the website
VT
VT9
VT9
VT9
BDX
4
4
4
AERWEB300
4
4
4
DRE (*)
(x 2)
(x 2)
(x 2)
VT9
VT9
VT9
4
4
4
4
4
4
(x 2)
(x 2)
(x 2)
4
4
4
VT9
VT9
VT9
4
4
4
4
4
4
(x 2)
(x 2)
(x 2)
4
4
4
VT9
VT9
VT9
4
4
4
4
4
4
(x 2)
(x 2)
(x 2)
(*) = Only for versions at 400V/3N/50Hz
Unit Configurator
requirements.
•
•
•
•
•
Optimised for operation in heat pump mode
Single and three-phase tandem compressors PRODUCTION OF HOT WATER UP TO 55 °C
WITH AN external TEMPERATURE OF -5 °C operating range FROM -15°C to 46°C external air tEMPERATURE
Option for pump and buffer tank WITH supplementary ELECTRIC HEATER
Features
• Maximum safety under all operating conditions. These heat pumps can produce hot
water up to 55°C, operating at external temperatures between -15 °C and 42 °C, always
ensuring continuous operation
• 4 versions available:
ANR H: Standard version
ANR HP: Version with pump
ANR HA: Version fitted with pump, expansion
tank, water filter (for all versions) and buffer
tank
ANR HK: Version fitted with pump, expan-
sion tank, water filter, buffer tank, electric
heater.
• Scroll compressors with high capacity and
low electrical power input
• Differential pressure switch supplied as
standard
• Electronic controller (Modu_control) with
start-up timers and control of defrosting
cycles
• Electric heater for the compressor crank case.
• Anti-freeze electric heater for plate heat
exchanger
• Anti-freeze electric heater for the buffer tank
• Axial fans for quiet operation
• The units are noted for their reduced dimensions and are varnished with polyester powder coating to protect them against atmospheric agents
• Soft start, electronic starting current reduction
device (standard for single phase versions).
110
1 2 3
4 5 6 7
8
9
10
11
12
13
||||||||
Code
|||||||
|||
Heat recovery
||
Power supply
Size Model
Version
Coil
Evaporator
Code:
ANR
Coil:
° - Aluminium
Size:
R - Copper
0502, 0802, 0902
S - Tinned copper
Model:
H - Heat pump
Evaporator:
Version:
° - Standard
P - With pump
A - With buffer tank and pump
K - With buffer tank and pump + electric heater
° - PED regulations
Power supply:
° - 400V 3N ~50Hz
M - 230V ~ 50Hz
Heat recovery:
° - Standard
Accessories
• VT ANTI-VIBRATION MOUNTS: Set of antivibration mounts.
• AERWEB300: The AERWEB option allows remote
control of a chiller through a standard PC and an
ethernet connection with a standard browser; 4
versions available:
control maximum 6 units on RS485 network;
remote control maximum 18 units on RS485 network;
remote control maximum 6 units on RS485 network with integrated GPRS modem;
remote control maximum 18 units on RS485 network with integrated GPRS modem.
• DCPX: Fan speed controller allowing operation
in cooling mode within an external temperature
range from +20 °C to -10 °C; in heating mode in
summer to produce DHW with external temperatures up to +42 °C.
• BDX: Condensate drip tray for outdoor unit.
• DRE: Electronic soft starter. Reduces starting current by about 30%.
with a 7 core screened cable, minimum size
0.5 mm.
Compatibility with the VMF system
• VMF-CRP
• VMF-VOC
• VMF-ACS
• VMF-E5B|N
For further system information please refer to
the specific documentation.
Attention:
– the standard options are shown by the symbol °
Example of configuration code: ANR0502HAR°°
This is an ANR unit, size 0502 with refrigerant R407c, heat pump model, with buffer tank and pump, with copper condenser coil, with evaporator
and with electrical panel for compressors with motors 3N~ 400V 50Hz.
As each option is represented in a unique way from all the others it is not necessary to indicate (within the configuration code) the standard options
(identified by °).
111
Technical Data
Model ANR
502
Heat mode 30/35°C air 7°C db/6°C wb (UNDERFLOOR HEATING) - 230V/1/ 50 Hz
13,96
H
kW
Heating capacity
HP-HA-HK
kW
13,73
H
kW
3,88
Total input power
HP-HA-HK
kW
3,96
H
kW/kW
3,6
COP
HP-HA-HK
kW/kW
3,47
H
A
18,7
Total input current
HP-HA-HK
A
20,6
H
l/h
2400
Water flow rate
HP-HA-HK
l/h
2360
Pressure drop
H
kPa
20
Useful head available
HP-HA-HK
kPa
84
HEAT MODE 40/45°C air 7°C db/6°C wb (FAN COILS) - 230V/1/ 50 Hz
H
kW
13,24
Heating capacity
HP-HA-HK
kW
13,02
H
kW
4,5
Total input power
HP-HA-HK
kW
4,59
H
kW/kW
2,94
COP
HP-HA-HK
kW/kW
2,84
H
A
21,2
Total input current
HP-HA-HK
A
23,2
H
l/h
2280
Water flow rate
HP-HA-HK
l/h
2240
Pressure drop
H
kPa
18
HP-HA-HK
kPa
82
HEAT MODE **/55°C air 7°C db/6°C wb (LOW TEMPERATURE RADIATORS) - 230V/1/ 50 Hz
H
kW
12,45
Heating capacity
HP-HA-HK
kW
12,25
H
kW
5,25
Total input power
HP-HA-HK
kW
5,34
H
kW/kW
2,37
COP
HP-HA-HK
kW/kW
2,29
H
A
24,81
Total input current
HP-HA-HK
A
27
H
l/h
2400
Water flow rate
HP-HA-HK
l/h
2360
Pressure drop
H
kPa
20
HP-HA-HK
kPa
84
COOL MODE 12/7°C air 35°C - 230V/1/ 50 Hz
H
kW
11,9
Cooling capacity
HP-HA-HK
kW
12,1
H
kW
4,6
Total input power
HP-HA-HK
kW
4,7
H
kW/kW
2,59
EER
HP-HA-HK
kW/kW
2,57
H
A
23,5
Total input current
HP-HA-HK
A
23,4
H
l/h
2050
Water flow rate
HP-HA-HK
l/h
2080
Pressure drop
H
kPa
15
HP-HA-HK
kPa
90
H-HP-HA-HK
dB(A) (heat)
39,5
e Sound pressure
H-HP-HA-HK
dB(A) (cool)
41
H-HP-HA-HK
dB(A) (heat)
71,5
e Sound power
H-HP-HA-HK
dB(A) (cool)
73
Air flow rate
H-HP-HA-HK
m3/h
6550
H-HP-HA-HK
IN
F - 1”1/4
Hydraulic couplings
OUT
F - 1”1/4
Pump speed
HP-HA-HK
n°
3
Expansion tank capacity
HP-HA-HK
l
5
Buffer tank volume
HP-HA-HK
l
75
Sound power:
Aermec determines sound power values on the basis
of measurements made in accordance with ISO
9614-2, as required for Eurovent certification.
112
Sound pressure:
Sound pressure in free field conditions over a reflective plane (directivity factor Q=2) at 10 m distance
from the external surface of the unit, in accordance
with ISO 3744.
802
902
17,61
17,33
4,98
5,02
3,54
3,45
25,4
27,4
3030
2980
32
70
21,49
21,17
5,9
5,91
3,64
3,58
29,1
31
3700
3640
37
60
16,74
16,47
5,68
5,74
2,95
2,87
28
29,9
2880
2830
29
73
20,34
20,02
6,82
6,87
2,98
2,91
32,9
34,8
3500
3440
34
65
15,8
15,55
6,7
6,8
2,36
2,29
33
35,4
3030
2980
32
70
19,18
18,89
7,97
8,02
2,4
2,36
38,45
40,62
3700
3640
37
60
14,3
14,6
5,6
5,7
2,55
2,56
30,1
29
2460
2510
21
82
40
39
72
71
6450
F - 1”1/4
F - 1”1/4
3
5
75
17,6
17,9
7,9
8
2,55
2,56
36,7
34,8
3030
3080
26
75
40
35,5
72
67,5
6450
F - 1”1/4
F - 1”1/4
3
5
75
Model ANR
502
Heat mode 30/35°C air 7°C db/6°C wb (UNDERFLOOR HEATING) - 400V/3N/50 Hz
H
kW
13,77
Heating capacity
HP-HA-HK
kW
13,54
H
kW
3,72
Total input power
HP-HA-HK
kW
3,8
H
kW/kW
3,7
COP
HP-HA-HK
kW/kW
3,56
H
A
8,1
Total input current
HP-HA-HK
A
10
H
l/h
2360
Water flow rate
HP-HA-HK
l/h
2330
Pressure drop
H
kPa
20
HP-HA-HK
kPa
85
HEAT MODE 40/45°C air 7°C db/6°C wb (FAN COILS) - 400V/3N/50 Hz
H
kW
13,05
Heating capacity
HP-HA-HK
kW
12,83
H
kW
4,33
Total input power
HP-HA-HK
kW
4,43
H
kW/kW
3,01
COP
HP-HA-HK
kW/kW
2,9
H
A
8,8
Total input current
HP-HA-HK
A
10,7
H
l/h
2240
Water flow rate
HP-HA-HK
l/h
2210
Pressure drop
H
kPa
18
HP-HA-HK
kPa
86
HEAT MODE **/55°C air 7°C db/6°C wb (LOW TEMPERATURE RADIATORS) - 400V/3N/50 Hz
H
kW
12,36
Heating capacity
HP-HA-HK
kW
12,16
H
kW
5,06
Total input power
HP-HA-HK
kW
5,16
H
kW/kW
2,44
COP
HP-HA-HK
kW/kW
2,36
H
A
10,3
Total input current
HP-HA-HK
A
12,42
H
l/h
2360
Water flow rate
HP-HA-HK
l/h
2330
Pressure drop
H
kPa
20
HP-HA-HK
kPa
85
COOL MODE 12/7°C air 35°C - 400V/3N/50 Hz
H
kW
11,9
Cooling capacity
HP-HA-HK
kW
12,1
H
kW
4,4
Total input power
HP-HA-HK
kW
4,5
H
kW/kW
2,7
EER
HP-HA-HK
kW/kW
2,69
H
A
9,4
Total input current
HP-HA-HK
A
10,6
H
l/h
2050
Water flow rate
HP-HA-HK
l/h
2080
Pressure drop
H
kPa
15
HP-HA-HK
kPa
90
H-HP-HA-HK
dB(A) (heat)
39,5
e Sound pressure
H-HP-HA-HK
dB(A) (cool)
41
H-HP-HA-HK
dB(A) (heat)
71,5
e Sound power
H-HP-HA-HK
dB(A) (cool)
73
Air flow rate
H-HP-HA-HK
m3/h
6550
H-HP-HA-HK
IN
F - 1”1/4
Hydraulic couplings
OUT
F - 1”1/4
Pump speed
HP-HA-HK
n°
3
HP-HA-HK
l
5
Buffer tank volume
HP-HA-HK
l
75
802
902
17,22
16,95
4,55
4,6
3,78
3,68
10
12
2960
2920
30
71
20,96
20,64
5,48
5,51
3,82
3,75
11,7
13,7
3610
3550
36
65
16,41
16,14
5,28
5,34
3,1
3,02
10,8
12,8
2820
2780
28
75
20
19,69
6,48
6,51
3,09
3,02
12,9
14,8
3440
3390
33
68
15,42
15,18
6,28
6,35
2,46
2,39
12,95
15,2
2960
2920
30
71
18,85
18,57
7,57
7,61
2,49
2,44
15,06
17,3
3610
3550
36
65
14,4
14,7
5,3
5,4
2,72
2,72
11,5
12,6
2480
2530
22
81
40
39
72
71
6450
F - 1”1/4
F - 1”1/4
3
5
75
17,8
18,1
6,6
6,7
2,7
2,7
14
14,6
3060
3110
26
75
40
35,5
72
67,5
6450
F - 1”1/4
F - 1”1/4
3
5
75
Dimensions (mm)
C
ANR
Height (A)
Width (B)
Depth (C)
Weight empty
Vers.
H
HP
HA
HAK
mm
mm
mm
kg
kg
kg
kg
502
1580
1277
555
223
229
248
253
802
15800
1277
555
232
238
257
262
902
1580
1277
555
247
253
272
277
A
B
Cod.: SANRUY.01 / 1007
Technical Data
113
new
ANK
ANK
VT
Air cooled heat pump with axial fans
Heating capacity from 7.98 to 33.51 kW
BDX
ELECTRICAL ACCESSORIES
DRE5 1
DCPX51 2
DCPX53 2
MODU-485A 2
AERWEB300
VMF-CRP
VMF-VOC
VMF-E5B o N 2
VMF-ACS3KM 2 230V-1
VMF-ACS3KTN 2 400V-3N
KRB1
KRB2
KRB3
PR3
BS4KW230M
BS6KW230M
BS6KW400T
BS9KW400T
R410A
EUROVENT
programme: LCP/A/P/R.
The products involved can be found
at the website
•
•
•
•
•
PRODUCTION OF HOT WATER UP TO 60 °C
OPTIMISED FOR HEAT PUMP OPERATION
HIGH EFFICIENCY COMPRESSORS
HEATING OPERATION WITH EXTERNAL TEMPERATURES DOWN TO -20 °C
PRODUCTION OF HOT DOMESTIC WATER with eXTERNAL TEMPERATURES FROM
-20 °C up to 42 °C
• AVAILABLE options:
- WITH PUMP
- with PUMP and BUFFER tank
Characteristics
ANK H: Standard
ANK HP: With pump
ANK HA: With pump and buffer tank
• High-efficiency scroll compressor with crank
case heater
• High efficiency heat exchangers with trace
heating as standard
• Flow switch fitted as standard
• Electronic controller with start timers and
control of defrost cycles
• Axial flow fans for quiet operation
• Metal enclosure with anti-corrosion polyester
paint
• Electronic soft start to reduce starting current
(standard for single phase versions)
in cooling mode within an external temperature
range from +20 °C to -10 °C; in heating mode in
summer to produce DHW with external temperatures up to +42 °C.
• DRE: Electronic soft starter. Reduces starting current by about 30%.
• KRB: Electric anti-freeze heater for the base.
Prevents the formation of ice on the base.
• BSKW: Electric heater kit with IP44 panel for
remote mounting in a sheltered area. Available in
single and three phase power supply:
- BS4KW230M (4 kW, 230V/1/50Hz)
- BS6KW230M (6 kW, 230V/1/50Hz)
- BS6KW400T (6 kW, 400V/3/50Hz)
- BS9KW400T (9 kW, 400V/3/50Hz)
• BDX: Condensate drip tray with integrated
electric heater controlled by the external air
temperature sensor.
with a 7 core screened cable, minimum size
0.5 mm.
Compatibility with the VMF system
• VMF-CRP
• VMF-VOC
• VMF-ACS
• VMF-E5B|N
For further system information please refer to
the specific documentation.
Accessories
• VT ANTI-VIBRATION MOUNTS: Set of antivibration mounts.
versions available:
control maximum 6 units on RS485 network;
remote control maximum 18 units on RS485 network;
remote control maximum 6 units on RS485 network with integrated GPRS modem;
• DCPX: Fan speed controller allowing operation
114
Vers.
H-HP
HA
020
030
040
045
050
085
VT9
VT9
VT9
VT9
VT9
VT9
VT15A VT15A VT15A VT15A VT15A VT15A
BDX8 BDX9 BDX9 BDX9 BDX9 BDX9
100
VT15
VT15
-
150
VT15
VT15
-
✔(x2)
✔(x2)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
NOTE:
1. Only available for 400V/3N/50Hz units.
Factory fitted only.
2. MODU-485A |DCPX |VMF-ACS |VMF E5
accessories are mandatory for the control and
production of DHW.
Accessories DRE/KRB1/KRB2/KRB3 and
BDX8/9 factory fitted only. ✔
✔
✔
✔
✔
✔
✔
✔
Unit Configurator
requirements.
1 2 3
4 5 6
7
8
9
10
11
12
13
|||||||||
Code
|
Model
|
Execution
|
Field of use
|
Power supply
||||
Size VersionCoil
Evaporator
Code:
Coil:
ANK
° - Aluminium
R - Copper
Size:
S - Tinned copper
020, 030, 040, 045, 050, 085, 100, 150
V - Epoxy coated aluminium
Model:
H - Heat pump
Version:
° - Standard
P - With pump
Execution:
° - Standard
Field of use:
° - Leaving water temperature down to +4 °C
Z - Leaving liquid temperature from +4 °C down to 0 °C
Y - Leaving liquid temperature from 0 °C down to -8 °C
Evaporator:
° - Standard
Power supply:
° - 400V/3N/50Hz
M - 230V/1/50Hz for sizes 020 - 030 - 040 - 045
Attention:
- the standard options are shown by the symbol °
Example of the configuration code: ANK085HP°R°°
This is an ANK unit, size 085, heat pump model, with pump, standard execution, copper condenser coil, standard evaporator, and electrical panel
400V/3N/50Hz.
115
Technical Data EHPA 400V/3N/50Hz
Technical Data
Heating capacity
Total input power
Total input current
COP
Water flow rate
H
HP-HA
H
HP-HA
H
H
HP-HA
H
HP-HA
Pressure drop
H
Available head
HP-HA
Cooling capacity
Total input power
Total input current
EER
Water flow rate
H
HP-HA
H
HP-HA
H
H
HP-HA
H
HP-HA
Pressure drop
H
Available head
HP-HA
H
Starting current (LRA) 3
H
COMPRESSOR SCROLL
Quantity/circuit
all
Part load
Refrigerant
Quantity
all
all
Fans axial
Quantity
all
Air flow rate
all
Sound pressure
all
Sound power
all
Vers.
230V/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
kW
kW
kW
kW
kW
kW
kW
kW
A
A
W/W
W/W
W/W
W/W
l/h
l/h
l/h
l/h
kPa
kPa
kPa
kPa
kW
kW
kW
kW
kW
kW
kW
kW
A
A
W/W
W/W
W/W
W/W
l/h
l/h
l/h
l/h
kPa
kPa
kPa
kPa
A
A
A
A
020
7.98
7.98
7.87
7.87
2.54
2.50
2.59
2.55
12
4.6
3.14
3.19
3.04
3.09
1370
1370
1350
1350
23.0
23.0
61.5
61.5
6.82
6.76
6.91
6.84
2.36
2.33
2.43
2.41
11.1
4.3
2.89
2.90
2.84
2.84
1170
1160
1190
1180
16.5
16.5
68.0
68.0
13.9
6.1
45.0
39.7
030
10.05
10.05
9.91
9.91
3.11
3.11
3.15
3.15
14.3
6.1
3.23
3.23
3.15
3.15
1730
1730
1700
1700
15.0
15.0
67.0
67.0
8.15
8.15
8.25
8.25
2.82
2.82
2.89
2.89
13.0
5.6
2.89
2.89
2.85
2.85
1400
1400
1420
1420
9.5
9.5
74.0
74.0
19.4
7.7
45.0
40.3
040
10.88
12.26
10.74
12.10
3.47
3.79
3.51
3.81
16.8
7.5
3.14
3.23
3.06
3.18
1870
2110
1850
2080
19.0
22.0
63.0
57.0
9.55
10.48
9.67
10.61
3.24
3.55
3.30
3.61
15.6
7.0
2.95
2.95
2.93
2.94
1640
1800
1660
1820
14.0
16.5
68.0
63.0
22.2
9.1
45.0
54.3
045
13.50
14.07
13.29
13.85
3.88
4.18
3.98
4.27
18.8
7.9
3.48
3.37
3.34
3.24
2320
2420
2290
2380
19.0
21.0
80.0
78.5
11.69
11.57
11.85
11.74
3.73
3.98
3.88
4.12
18.3
7.6
3.13
2.91
3.06
2.85
2010
1990
2040
2020
14.0
14.0
86.0
86.0
25.0
10.6
45.0
61.3
050
15.38
15.15
4.44
4.54
8.8
3.46
3.34
2650
2610
25.0
71.0
13.04
13.22
4.34
4.49
8.6
3.00
2.94
2240
2270
19.0
79.0
11.8
71.3
085
17.49
17.25
5.07
5.16
10.2
3.45
3.34
3010
2970
30.0
64.0
15.48
15.68
5.22
5.35
10.5
2.97
2.93
2660
2700
25.0
71.0
12.3
91.3
100
27.19
26.59
8.43
8.37
17.2
3.22
3.18
4680
4570
36.0
112
25.20
25.78
8.18
8.13
16.7
3.08
3.17
4330
4430
32.0
115
21.7
72.6
150
33.51
32.72
10.56
10.61
20.8
3.17
3.08
5760
5630
46.0
135
29.20
29.92
10.13
10.20
20.0
2.88
2.93
5020
5150
36.0
143
25.8
104.7
n°/n°
%
1/1
0-100
1/1
0-100
1/1
0-100
1/1
0-100
1/1
0-100
1/1
0-100
2/1
0-50-100
2/1
0-50-100
N°
Ø
1
1" 1/4
1
1" 1/4
1
1" 1/4
1
1" 1/4
1
1" 1/4
1
1" 1/4
1
1" 1/4
1
1" 1/4
n°
m3/h
1
3500
37.0
68.0
2
8000
39.5
70.5
2
8000
39.5
70.5
2
7500
39.5
70.5
2
7500
39.5
70.5
2
7500
39.5
70.5
2
14500
45.5
77
2
13500
46.5
78
dB(A)
R410A
A 2/W 35
Vers.
Heating capacity
Total input power
COP
Water flow rate 4
Pressure drop
Available head
Air flow rate
Sound pressure
Sound power
ANK040
9.764
9.610
3.074
3.097
3.176
3.103
ANK045
11.239
11.021
3.378
3.467
3.327
3.179
ANK050
11.556
11.330
3.550
3.649
3.255
3.105
ANK085
13.300
12.568
4.110
4.045
3.236
3.107
ANK020
1470
28
55.0
3500
37.0
68.0
ANK030
1840
16
63.0
8000
39.5
70.5
ANK040
2260
24
51.0
8000
39.5
70.5
ANK045
2550
18
74
7500
39.5
70.5
ANK050
2800
22
66
7500
39.5
70.5
ANK085
3222
27
56
7500
39.5
70.5
2008
NOTE:
A External air temperature
W Leaving condenser water temperature
4
Water flow rates refer to conditions:
Entering condenser water temperature.
30 °C
Leaving condenser water temperature.
35 °C
Sound power:
measurements made in accordance with ISO 9614-2, as
Sound pressure:
Sound pressure in free field conditions over a reflective
plane (directivity factor Q=2) at 10 m distance from the
external surface of the unit, in accordance with ISO 3744.
Technical Data
ANK
Vers.
230V/1
H
400V/3N
230V/1
HP-HA
400V/3N
230V/1
H
400V/3N
230V/1
HP-HA
400V/3N
230V/1
H
400V/3N
230V/1
HP-HA
400V/3N
230V/1
H
400V/3N
230V/1
HP-HA
400V/3N
230V/1
H
400V/3N
230V/1
HP-HA
400V/3N
230V/1
H
400V/3N
230V/1
HP-HA
400V/3N
H
230/1
H
400V/3N
HP-HA 230/1
HP-HA 400V/3N
Heating capacity
Total input power
COP
Cooling capacity
Total input power
EER
ESEER
kW
kW
kW
kW
kW
kW
kW
kW
W/W
W/W
W/W
W/W
kW
kW
kW
kW
kW
kW
kW
kW
W/W
W/W
W/W
W/W
020
8.67
8.67
8.58
8.58
2.12
2.12
2.21
2.18
4.10
4.10
3.89
3.94
9.44
9.36
9.57
9.48
2.48
2.45
2.51
2.48
3.81
3.82
3.81
3.82
3.16
3.18
3.28
3.30
030
10.92
10.92
10.84
10.84
2.64
2.64
2.64
2.64
4.14
4.14
4.10
4.10
11.30
11.30
11.43
11.43
2.95
2.95
3.00
3.00
3.83
3.82
3.81
3.81
3.24
3.24
3.37
3.35
040
11.93
13.40
11.90
13.24
2.88
3.22
2.90
3.23
4.14
4.17
4.10
4.10
13.23
14.52
13.38
14.67
3.40
3.73
3.43
3.76
3.89
3.89
3.90
3.90
3.28
3.27
3.45
3.44
045
14.04
14.80
13.84
14.88
3.27
3.55
3.37
3.60
4.29
4.17
4.11
4.13
16.30
16.04
16.54
16.25
3.93
4.18
4.08
4.27
4.15
3.84
4.05
3.81
3.46
3.25
3.47
3.26
050
16.27
16.12
3.81
3.91
4.27
4.12
18.07
18.30
4.56
4.66
3.96
3.93
3.40
3.45
085
18.46
18.31
4.36
4.45
4.23
4.11
21.43
21.69
5.50
5.59
3.89
3.88
3.33
3.41
100
29.12
28.49
7.03
6.95
4.14
4.10
33.69
34.41
8.88
8.74
3.80
3.94
3.89
4.08
150
35.90
35.06
8.92
8.94
4.03
3.92
39.06
39.96
11.02
11.03
3.55
3.62
3.85
3.93
Data declared in accordance
with Uni EN 14511-2: 2011
HEATING:
Entering condenser water
temperature
30 °C
Leaving condenser water
temperature
35 °C
External air
temperature 7 °C db / 6 °C wb
COOLING:
Entering evaporator water
temperature
23 °C
Leaving evaporator water
temperature
18 °C
External air
temperature 35 °C
Dimensions (mm)
ANK
Height (A)
Vers.
H-HP
HA
Width (B)
Depth (C)
H
HP
HA
020
1028
1000
1358
400
118
123
160
mm
mm
mm
mm
kg
kg
kg
030
1281
1000
1450
450
149
154
211
040
1281
1000
1450
450
152
157
214
045
1281
1000
1450
450
165
175
232
050
1281
1000
1450
450
172
182
238
085
1281
1000
1450
450
174
184
241
100
1450
150
1450
1750
1750
750
296
314
364
750
341
362
412
B
Data declared in accordance with
uni en 14511-2: 2011
HEATING:
Entering condenser water temperature
40 °C
Leaving condenser water temperature
45 °C
116
ANK030
8.179
8.045
2.545
2.583
3.214
3.115
All
l/h
H
kPa
HP-HA
All
m3/h
All
dB(A)
All
Weight empty
COOLING:
Entering evaporator water temperature
Leaving evaporator water temperature
External air temperature ANK020
6.260
H
HP-HA
6.048
kW
H
1.870
HP-HA
1.940
H
3.348
W/W
HP-HA
3.118
12 °C
7 °C
35 °C
Sound power:
Aermec determines sound power values on the basis
of measurements made in accordance with ISO
NOTE:
3 Single phase units have soft start fitted as standard.
B
Sound pressure:
Sound pressure in free field conditions over a reflective plane (directivity factor Q=2) at 10 m distance
from the external surface of the unit, in accordance
with ISO 3744.
A
A
A
C
A
B
vers. H-HP
C
vers. HA
B
C
ANK 100 - 150
H-HP-HA
C
Cod.: SANKUY.04 / 1201
ANK
Data declared in accordance with uni EN 14511-2:
117
Scelta dell'unità
HE
Air cooled heat pump chillers for under floor systems application.
Cooling capacity 6,7 up to 47,5 kW
Heating capacity 6,3 uo to 38,7 kW
requirements.
Sheet configurer:
12
345
6
7
8
9
10
11
||||||||
Code | Refrigerant |Storage tank| Evaporator |
||||
SizeVersion Coils
Power supply
Initials:
HE
Size:
020*, 025, 030, 040, 050, 080, 090, 100, 150, 200
Refrigerant :
° - R407C
Version:
° - Standard
H - Heat pump
Buffer tank:
U - Single ring with accumulation and pump
B
- Double ring with accumulation and primary pump
Batteries:
°
- aluminium
R
- copper
S
- tinned copper
V - made of aluminium with epoxy paint
Evaporator:
°
- Standard
•LIVING WATER TEMPERATURE UP TO 20 °c
•FUNCTIONING WITH AMBIENT TEMPERATURE DOWN TO -15 °c IN
HEATING AND TO 46 °c IN COOLING
•COMPLETE WITH PUMP AND STAINLESS STEEL STORAGE TANK
•AVAILABLE IN SINGLE OR DOUBLE HYDRAULIC RING
Features
• Available in 10 different sizes
• Heat pump models with high-efficiency special compressor and functioning with
ambient temperature down to -15 °C
• Two versions are available:
HE U: Version with single ring equipped with
circulation pump, expansion tank, mechanical water filter, stainless steel storage tank
HE B: Double ring version (with circuit breaker version) fitted with primary circulation
pump, expansion tank, mechanical water fil- • Axial flow fans for quiet operation
ter , stainless steel storage tank; in this case • Metallic protective cabinet with rustproofing
the user circuit (radiating panel) must have a
polyester paint
dedicated pump (not supplied)
• Electrical power supply single phase to 14
• Scroll compressor
kW in cooling and 10.6 kW in heating
•Differential pressure switch or flow switch,
standard
• Electronic control card and with start timing
and management of defrost cycles
Power supply:
°
- 400V/3N/50Hz
M - 230V/1/50Hz (**)
Caution:
* The size HE 020 it’s not available:
1.In the cooling version
2. With 400/3N/50 Hz power supply
– the single phase power supply (field 11: option M) is only available for sizes 025 - 030 - 040 - 050 cooling only, and for sizes 020 H - 025 H - 030 H - 040 H, for the heat pumps **.
Example of the commercial code: HE100HUR
This is an HE unit, with size 100 with R407C refrigerant gas, heat pump type single ring with storage tank and pump, with condensing coils made of
copper, with evaporator and with electrical panel for compressors with motors 3~ 400V 50Hz.
As you might have noted, as every operation is represented unequivocally by all the others, it is not necessary to indicate the standard options
(represented by °) inside the commercial code.
Note: using the HE unit for under floor cooling we suggest to provide an air dehumidification system (dehumidifier, split system, ...)
Accessories
• BDX: Condensate drip tray for outdoor unit.
heat exchangers.
cable up to 150 m.
• DCPX: Low temperature device for operation Can only be applied in the factory.
• RA: Antifreeze electric heater for the accumuof outdoor units at ambient temperatures less • PR3: Simplified remote panel. This makes it
lation tank. Can only be applied in the factothan 19 °C down to - 10 °C.
possible to carry out the unit's basic controls
ry.
• DRE: Current soft starter device (about 30%
with the signalling of alarms. Can be made • SDP: Card for making the PR1 accessory
reduction for single-circuit-units).
remote with shielded cable up to 30 m.
remote up to 150 m.
Only available for 400V/3N/50Hz power sup- • PRD1: Smart remote panel. Repeats at a • VT: anti-vibration mounting.
ply. It must be factory set.
distance the functions of the panel on the
• KR: Electric antifreeze heater for plate-type
machine. Can be made remote with shielded
118
119
Technical data cooling only
Mod. HE
Cooling capacity
Total input power
Total input current 230V-1
Total input current 400V-3N
E.E.R.
Water flow rate
Static pressure available kPa
Starting current 230V-1
Starting current 400V-3N
 Sound pressure
Plumbing connections IN
Plumbing connections OUT
Water flow rate to the condenser
Accumulation tank capacity
Versions
kW
kW
A
A
W/W
l/h
kPa
A
A
dB(A)
Gas
Gas
m3/h
l
25
8,4
2,5
11,8
5,6
3,36
1440
57
63
34
36
1”
1”
3450
35
30
10,1
3
15,2
8
3,37
1740
54
80
44
33
1”
1”
5300
35
40
11,9
3,5
17,6
8,9
3,4
2050
56
104
50
33
1”
1”
5300
35
50
14,5
4,2
21,8
10,7
3,45
2490
50
118
54
37
1”
1”
6500
35
80
18
5,1
--12,6
3,53
3100
58
--70
37
1”1/4
1”1/4
6700
75
90
23,8
6,7
--15,4
3,55
4090
57
--105
36
1”1/4
1”1/4
6450
75
100
27,2
8
--16,7
3,4
4680
54
--102
44
1”1/2
1”1/4
13450
145
150
35,8
10,5
--21,8
3,41
6160
58
--135
45
1”1/2
1”1/4
12400
145
200
47,5
13,7
--27
3,47
8170
52
--141
46
1”1/2
1”1/4
12000
145
Accessori disponibili
Accessories
available
Tutte le versioni
020
025
030
040
050
080
090
100
150
200
All
the
versions
20
25
30
40
50
100
150
200
DCPX 39
✔
✔
✔
✔
✔ 80
✔ 90
✔
DCPX40
39
DCPX
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
DRE
5
✔
✔
✔
DCPX
40
✔
✔
✔
DRE 10✔
DRE15
5
✔
✔
✔
DRE
✔
BDX
✔
✔
✔
✔
✔
DRE510
✔
BDX 6
✔
✔
DRE 15
✔ ✔
KR 3
✔
✔
✔
✔
✔
BDX
5
PR3
✔✔
✔✔
✔ ✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
PRD1
✔
✔
✔
✔
✔ ✔
✔ ✔
✔
✔
✔
✔
BDX 6
RA
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
KR 3
✔
✔
✔ ✔
SDP
✔
✔
✔
✔ ✔
✔ ✔
✔ ✔
✔
✔
✔
VT
7
✔✔
✔✔
✔
PR3
✔
✔
✔
✔
✔
✔
✔
✔
VT 8
✔
✔
✔
✔
PRD1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
VT 9
✔
✔
RA
SDP
VT 7
VT 8
VT 9
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Dimensions (mm)
 Sound pressure in free field conditions at a distance of 10 mt.s a
directional factor of 2.
In accordance with ISO 3744 regulations
The electrical data and the heads refer to models with a single ring
COOLING:
Water inlet temperature 23°C
Water outlet temperature 18°C
-outside air temp. 35 °C
- Dt = 5 °C.
Heat pump technical data
Versione
kW
kW
A
A
W/W
l/h
kPa
kW
kW
A
A
W/W
l/h
A
A
db(A)
Gas
Gas
m3/h
l
20
6,9
2,3
11,7
5,5
3
1190
59
6,3
1,8
9,3
4,7
3,5
1080
60
28
36
1”
1”
3300
25
25
8,6
2,9
14,4
6,2
2,97
1480
56
7,8
2,2
11,7
5,3
3,55
1340
76
34
36
1”
1”
3450
35
30
9,7
3
16
8,1
3,23
1670
56
8,5
2,4
13
7,4
3,54
1460
78
42
33
1”
1”
5300
35
40
12
3,7
20,6
9,4
3,24
2060
56
10,6
3
17
8,3
3,53
1820
101
50
33
1”
1”
5300
35
50
14,1
4,2
--10,4
3,36
2430
51
12,1
3,3
--9,3
3,67
2080
--57
37
1”
1”
6500
35
80
17
5,2
--11,8
3,27
2920
68
15
4,5
--11
3,33
2580
--68
37
1”1/4
1”1/4
6700
75
90
20,1
6,2
--13,6
3,24
3460
73
17,6
5
--11,9
3,52
3030
--78
36
1”1/4
1”1/4
6450
75
150
37
11,2
--22,2
3,3
6360
56
31,6
9,3
--19,9
3,4
5440
--132
45
1”1/2
1”1/4
12400
145
200
44,2
13,6
--26,3
3,25
7600
56
38,7
11,3
--23,3
3,42
6660
--173
46
1”1/2
1”1/4
12000
145
020 - 025
030 - 040 - 050
080 - 090
100 - 150 - 200
Height
Width
Depth
Weight
Weight (versions H)
 Sound pressure in free field conditions at a distance of 10 mt.s a
directional factor of 2.
In accordance with ISO 3744 regulations
The electrical data and the heads refer to models with a single ring
Cooling:
-outside air temp. 35 °C
- Dt = 5 °C.
100
25,5
8,3
--17,9
3,07
4390
57
22,4
6,8
--16,4
3,29
3850
--103
44
1”1/2
1”1/4
13450
145
Heating:
outside air temp 7 °C b.s., 6 °C b.u.;
- Dt = 5 °C.C.
HE/
HEH
A
B
C
kg
kg
20
25
30
40
50
80
90
100
150
200
864
1120
435
108
112
1014
1120
435
113
117
1250
1120
435
135
141
1250
1120
435
139
146
1250
1120
435
152
158
1280
1167
555
186
192
1280/1580*
1167
555
196
223
1345
1750
750
355
373
1345
1750
750
377
417
1345
1750
750
427
460
*The height is referred to HE series as heat pump (HEH)
Cod.: SHEUY.05 / 1112
Mod. HE
Cooling capacity
Total input power
E.E.R.
Water flow rate
Static pressure available
Heating capacity
Total input power
C.O.P.
Water flow rate
Starting current 230V-1
Starting current 400V-3N
 Sound pressure
Plumbing connections IN
Plumbing connections OUT
Water flow rate to the condenser
Buffer tank capacity
The technical data given in this documentation are not binding.
Aermec S.p.A. reserves the right to apply at any time all the
modifications deemed necessary for improving the product.
Aermec S.p.A.
Via Roma, 996 - 37040 Bevilacqua (VR) -
NEW
HBI
R410A
HBI_WT/WTS Accessory Compatibility (DHW Storage Tank)
MODEL 230V~50Hz
HBI200WT/WTS
HBI300WT/WTS
Air cooled split system heat pump for heating, cooling
and production of DHW
DC Inverter Technology
Heat capacity from 8.5 kW to 16 kW
HBI_C
HBI_WT / WTS
HBI_E
HBI080
3
3
HBI100
3
3
HBI120
3
3
HBI140
3
3
HBI160
3
3
-
-
-
HBI120
3
3
HBI140
3
3
HBI160
3
3
MODEL 400V 3N~50Hz
HBI200WTT/WTST
HBI300WTT/WTST
Technical Data
Cooling capacity 1 (nominal)
Input power 1 (nominal)
EER 1
Cooling capacity 2 (nominal)
EER 2
Heating capacity 1 (nominal)
COP 1
Heating capacity 2 (nominal)
COP 2
Max input power
(without electric heater) Cooling
Max input power
(without electric heater) Heating
OUTdoor UNIT
kW
kW
kW
kW
kW
kW
kW
kW
Air flow rate
HBI060C HBI080C HBI100C HBI120C HBI140C HBI160C HBI120CT HBI140CT HBI160CT
5.5
9.05
10.5
14
15
15.5
14
15
15.5
1.62
2.50
3.14
3.68
4.29
4.63
3.68
4.29
4.43
3.4
3.62
3.34
3.8
3.5
3.35
3.8
3.5
3.5
4
6.5
8.0
10
11
11.5
10
10.5
11
1.54
2.50
3.08
3.45
3.93
4.6
3.45
3.75
4.07
2.6
2.6
2.6
2.9
2.80
2.5
2.9
2.8
2.7
6.2
8.5
10
12
13.5
16
12
14
15
1.51
2.10
2.50
2.79
3.21
3.95
2.67
3.33
3.7
4.1
4.00
4.00
4.3
4.2
4.00
4.5
4.2
4.05
5.5
8.0
9.0
11.5
12.5
14
11
12
14
1.83
2.54
2.90
3.38
3.73
4.59
3.23
3.58
4.38
3
3.15
3.1
3.4
3.35
3.05
3.4
3.35
3.2
kW
2.46
5
5
6.6
6.6
7
7.0
7.0
7.5
kW
2.75
4.6
4.6
5.5
5.5
6
6.0
6.0
6.5
230V~50Hz
230V~50Hz
230V~50Hz
230V~50Hz
230V~50Hz
230V~50Hz 400V 3N~50Hz 400V 3N~50Hz 400V 3N~50Hz
230V~50Hz
230V~50Hz
230V~50Hz
230V~50Hz
230V~50Hz
230V~50Hz 400V 3N~50Hz 400V 3N~50Hz 400V 3N~50Hz
m³/h
/
/
/
6398
6398
6398
3766
3766
3766
N° of fans
n°
/
1
1
2
2
2
2
2
2
R410A refrigerant charge
kg
1.7
2
2
3.3
3.3
3.3
3.5
3.5
3.5
dB(A)
57
57
57
57
57
60
57
57
60
e Sound pressure
dB(A)
59
59
59
59
59
62
59
59
62
e Sound pressure
Liquid Ø 6.35(1/4”) 9.52(3/8”) 9.52(3/8”) 9.52(3/8”) 9.52(3/8”) 9.52(3/8”) 9.52(3/8”) 9.52(3/8”) 9.52(3/8”)
Cooling connections
Gas Ø 12.7(1/2”) 15.9(5/8”) 15.9(5/8”) 15.9(5/8”) 15.9(5/8”) 15.9(5/8”) 15.9(5/8”) 15.9(5/8”) 15.9(5/8”)
flare
Type Ø
indoor unit
HBI060E HBI080E HBI100E HBI120E HBI140E HBI160E HBI120ET HBI140ET HBI160ET
Input power indoor unit*
W
200
245
245
245
245
245
200
200
200
Pump max input power
W
200
205
205
205
205
205
200
200
200
Speeds
n°
3
3
3
3
3
3
3
3
3
Electric heater capacity power **
kW 1.5+1.5
3+3
3+3
3+3
3+3
3+3
6
6
6
Hydraulic connections (In/Out) - (Male)
Ø
G1"
G1"
G1"
G1"
G1"
G1"
G1"
G1"
G1"
Expansion vessel capacity
l
10
AERMEC partecipates in the EUROVENT programme
for: LCP/A/S/R
The products of interest can be found on the website
Unit mounted control panel (HBI_E)
Characteristics
• 6 sizes single phase HBI_C outdoor unit and
3 sizes three phase HBI_CT outdoor unit
available
• 6 sizes single phase HBI_E outdoor unit
(Hydronic module) and 3 sizes three phase
HBI_ET outdoor unit available for wall installation, with compact dimensions
• 4 sizes of DHW Storage Tank available of 200 300 litres capacity with main coil, electric
heater and supplementary heating coil
• Outdoor unit with one or two fans with DC
Inverter motor for continuous speed modulation
• The DC Inverter compressors have been
selected to maximise efficiency, reduce consumption and minimise starting current
• Microprocessor controller
• Operating modes:
-Cooling
-Heating
-Domestic Hot Water production
• Possibility of prioritising operating mode
• Anti-legionella Cycle: function can be set via
HBI060
3
3
the Control Panel on the HBI_E indoor unit
• Anti-freeze function for the Hydronic Module
and DHW Storage Tank
• Indoor unit fitted (hydraulic side) with:
-water filter
-plate heat exchanger
-expansion vessel (10 litres)
-electric heaters:
1step (6 kW) for three phase unit
2 steps (1.5 kW+1.5 kW) only HBI060E unit
2 steps (3 kW+3 kW) single phase activated/
deactivated
-air vent
-safety valve (3 bar)
-flow switch
-circulation pump
-gauge
• Maximum length of the refrigerant pipes up
to 30 m, maximum level difference between
outdoor unit and indoor unit 15 m
• Outdoor unit supplied with Base Electric
Heating Kit to prevent the formation of ice
during heat pump operating mode
• Indoor unit capable of controlling:
- 2-way valve
- 3-way valve
- Remote contact
- Ambient Thermostat
- Ambient Temperature Sensor (supplied
loose), can be installed in the wall in a rectangular 3-module recess box (type 503)
• Weekly Timer
• Auto-Restart Function
• Operational limits:
-Cooling
Outdoor air temperature +10 °C to +48 °C
-Heating
Outdoor air temperature -20 °C to +35 °C
-Domestic Hot Water production
Outdoor air temperature -20 °C to +45 °C
• Emergency Operation:
in the event of malfunction of the outdoor
unit operating Heating or DHW mode, the
electric heaters are activated
• Condensing control device as standard; permits cooling mode operation with outdoor
temperatures down to +10 °C
Outlet water temperature
e eSound pressure
1 (range)
2 (range)
1 (range)
2 (range)
Cooling connections
°C
18 ÷ 25
°C
7 ÷ 25
°C
25 ÷ 45
°C
25 ÷ 55
dB(A)
31
Liquid Ø 6.35(1/4”) 9,52(3/8”) 9,52(3/8”) 9,52(3/8”) 9,52(3/8”) 9,52(3/8”) 9,52(3/8”) 9,52(3/8”) 9,52(3/8”)
Gas Ø 12.7(1/2”) 15,9(5/8”) 15,9(5/8”) 15,9(5/8”) 15,9(5/8”) 15,9(5/8”) 15,9(5/8”) 15,9(5/8”) 15,9(5/8”)
flare
Type Ø
HBI_WT/WTS Accessory Technical Data Domestic Hot Water storage tank
Capacity
DHW outlet temperature
l
°C
kW
A
Electric heater capacity
Electric heater input current
Utility hydraulic connections (In/Out) - (Female)
Main coil hydraulic connections (In/Out) - (Female)
Supplementary coil hydraulic connections (In/Out) - (Female)
Supplementary coil
L
Øxs
• HBI_WT (230V ~ 50Hz)
• HBI_WTT (400V 3N ~ 50Hz)
200, 300 litre DHW Storage Tank with main coil and 3 kW electric supplementary heater
-Magnesium sacrificial anode
-Stainless steel tank and coil
-External covering in painted sheet steel and heat insulating material,
thickness 50 mm
-Indoor installation
122
G1/2”
G3/4”
-
230V~50Hz
400V 3N~50Hz
230V~50Hz
400V 3N~50Hz
G1/2”
G3/4”
G3/4”
10
22 x 0,8
G1/2”
G3/4”
-
3
13
230V~50Hz
400V 3N~50Hz
G1/2”
G3/4”
G3/4”
10
22 x 0,8
DHW outlet temperature
* Pump max power input + Auxiliaries
** Electric heater 2 step ON/OFF control from Control Pane
*** With electric heater/without electric heaters 40 ÷ 50°C
Fan coil units
Cooling
• HBI_WTS (230V 3N ~ 50Hz)
• HBI_WTST (400V 3N ~ 50Hz)
200, 300 litre DHW Storage Tank with main coil, supplementary heating coil and 3 kW electric supplementary heater
-Magnesium sacrificial anode
-Stainless steel tank and coil
-External covering in painted sheet steel and heat insulating material,
thickness 50 mm
-Indoor installation
230V~50Hz
400V 3N~50Hz
HBI300WTS/WTST
300
Data declared according to EN 14511-2
Under floor system
Accessories
Ø
Ø
Ø
m
mm
HBI200WT/WTT HBI200WTS/WTST HBI300WT/WTT
200
200
300
40 ÷ 80 ***
3
3
3
13
13
13
- Inlet/outlet water temperature
- External air temperature
Cooling
23°C / 18°C
35°C B.S. / 24°CB.U.
- Inlet/outlet water temperature - External air temperature
Under floor system
Fan coil units
Heating (without electric heaters):
Heating (without electric heaters):
- Inlet/outlet water temperature 30°C / 35°C
- External air temperature 7°C B.S. / 6°C B.U.
- Inlet/outlet water temperature - External air temperature  measured at 1m in a semi anechoic chamber
 measured at 1.4m in a semi-anechoic chamber
12°C / 7°C
35°C B.S. / 24°C B.U.
40°C / 45°C
7°C B.S. / 6°C B.U.
123
HBI System Configuration
Dimensional Data
B
OUTDOOR UNIT
C
INDOOR UNIT
A
A
B
C
Under floor system
Indoor unit
MODEL
2-way valve
HBI060E
HBI080E
HBI100E
HBI120E
HBI140E
HBI160E
HBI120ET
HBI140ET
HBI160ET
3-way valve
Outdoor Unit
Height(A)
(mm)
900
900
900
900
900
900
900
900
900
Width(B)
(mm)
500
500
500
500
500
500
500
500
500
Depth(C)
(mm)
324
324
324
324
324
324
324
324
324
Net weight Gross weight
(kg)
(kg)
52
62
52
62
52
62
53
63
53
63
53
63
53
63
53
63
53
63
MODEL
HBI060C
HBI080C
HBI100C
Height (A)
(mm)
791
791
791
Width (B)
(mm)
921
921
921
Depth (C)
(mm)
427
427
427
(kg)
(kg)
66
71
69
74
69
74
B
Supplementary heat sources
A
Fan coils
Storage tank
HBI_WT / WTS
A
The supplementary coil is
present only in HBI_WTS
models
B
Supply
The main coil is
present in all HBI_WT
/ WTS modelS
Water inlet
System example - operating in heating mode
124
Fill point
Tank drain
C
Storage Tank
Outdoor unit
Height (A)
MODEL
(mm)
HBI120C
1253
HBI140C
1253
HBI160C
1253
HBI120CT
1253
HBI140CT
1253
HBI160CT
1253
Width (B)
(mm)
950
950
950
950
950
950
Depth (C)
(mm)
412
412
412
412
412
412
(kg)
(kg)
99
108
99
108
99
108
99
108
99
108
99
108
MODEL
HBI200WT / WTS
HBI300WT / WTS
Height (A)
(mm)
1595
1620
Width (B)
(mm)
540
620
Net weight* Gross weight
(kg)
(kg)
68 / 71
77 / 80
82 / 87
92 / 97
Cod.: SHBIUY.01 / 1201
Fan coils
* Weight when empty
125
PreliminarY
Unit Configurator
CL
Air cooled chiller and heat pump with plug fan
Capacities from 5.5 to 39.3 kW
R410A
requirements.
Configuration fields
12
345
6
7
8
9
10
11
12
13
|
|
|
|
|
|
|
|
|
|
Code
|
Model
|
Version
|
Coil
|
Evaporator
|
|
|
|
|
|
Size
Execution
Heat recovery
Field of use
Power supply
Code:
CL
Size:
025, 030, 040, 050, 070, 080, 090, 100, 150, 200
Model:
° - Cooling only
H - Heat pump
Execution:
° - Standard
Version:
° - Standard
P - With pump
Heat recovery:
D - With desuperheater (partial heat recovery)
(for cooling only sizes 050 to 200)
Coil:
° - Aluminium
R - Copper
S - Tinned copper
V -Epoxy coated aluminium
Field of use:
° - Standard
Z - Low temperature leaving liquid from 0 °C to +4 °C
Y - Low temperature leaving liquid from -6 °C to 0 °C
Evaporator:
° - Standard
C - Condensing unit
Power supply:
° - 400V 3N~ 50Hz
M - 230V 1~ 50Hz (only for sizes 025 to 040)
Configurator Limitations
• OPTIMISED FOR HEAT PUMP OPERATION
• PRODUCTION OF HOT WATER UP TO 60 °c
• HEATING OPERATION WITH EXTERNAL
TEMPERATURES FROM -20 °c TO 42 °c
• InterfacES WITH Variable Multiflow VMF
SYSTEM
• AVAILABLE VERSIONS:
STANDARD
WITH PUMP
WITH PUMP AND BUFFER TANK
• ProduCTION OF DOMESTIC HOT
WATER (DHW) WITH EXTERNAL
Temperatures FROM -20°C TO 42 °C
Characteristics
• Cooling only and heat pump "H" models
• Manufactured with refrigerant R410A
• Versions available:
"°" Standard
"P" With pump
"A" With pump, expansion tank, water filter,
and buffer tank
• All versions are available for the production
of low chilled liquid temperatures from 4 °C
down to -6 °C. This option must be specified
at time of order
• Compressor isolator and mains disconnect
switch standard on all models
• Plate heat exchanger anti-freeze electric heat• Horizontal or vertical air discharge (site moder "KR" standard on heat pump "H" models
ified)
• Sizes 020 to 090 are fitted as standard with a
• High efficiency scroll compressor
plastic moulded air discharge hood
• Compressor crank case heater standard on • Condensate tray standard on heat pump "H"
heat pump "H" models
models
• Water filter and flow switch standard on all versions
• Plug fans with EC Inverter motors conforming
to regulation EU 327/2011
• Electronic controller with start timers and
optimisation of defrost cycles
• High efficiency plate heat exchangers
Heat pump "H" model
Heat recovery "D" option
not possible with:
not possible with:
- thermostatic expansion valve "Z" - "Y"
- thermostatic expansion valve "Z" - "Y"
- condensing unit "C"
- condensing unit "C"
- desuperheater option "D"
All versions:
DRE
FRC
GPCL
(1)KR
PR3
VT
Version "A" only:
RA
025
standard
✔
✔
✔
025
✔
030
standard
✔
✔
✔
030
✔
040
standard
✔
✔
✔
040
✔
050
standard
✔
✔
✔
050
✔
070
standard
✔
✔
✔
070
✔
080
standard
✔
✔
✔
080
✔
090
standard
✔
✔
✔
090
✔
100
✔
✔
✔
✔
100
✔
150
✔
✔
✔
✔
150
✔
200
✔
✔
✔
✔
200
✔
(1)Accessory
available only for cooling only "°" model, standard for heat
pump "H" model
Accessories
• DRE: Electronic soft starter. Reduces starting • KR: Plate heat exchanger anti-freeze electric heat- • VT: Anti-vibration mounts.
current by about 30%. Only available on three
er. Factory fitted only.
• MODU-485A: RS-485 interface for supervisphase units and factory fitted only.
ing systems with MODBUS protocol.
• FRC: Duct flange made from painted galvanised
of basic unit functions and alarm notification. • INTAKE Plenum: Galvanised steel plenum to
steel for ducted air intake and ducted air discharge
Remote mounted with shielded cable up to be installed on the condenser coil. Facilitates duct
(available only for sizes 100, 150, 200)
30 m distance.
installations.
• GPCL: Protective grille. Protects the external • RA: Buffer tank anti-freeze electric heater.
condenser coil from damage.
126
127
Technical Data
Total power input
Total current input A)
Water flow rate
EER
ELECTRICAL DATA
Starting current
Part load
Compressor
Refrigerant
Total air flow rate
Type of fan
Number of fans
Evaporator
Water content heat exchanger
Buffer tank volume
Expansion tank volume
VERSION
Standard
Standard
kW
A-P
Standard
230V 1~
A-P
Standard
400V 3N~
A-P
l/h
All
Standard
025
5.5
2.4
2.6
10.6
11.6
4.5
5.5
953
2.36
030
6.9
2.9
3.1
14.0
15.0
5.8
6.8
1182
2.35
040
9.0
4.2
4.4
19.0
20.0
9.4
10.4
1541
2.15
050
11.7
4.8
5.2
8.6
9.8
2010
2.43
070
15.0
6.1
6.5
10.3
11.5
2587
2.47
080
16.9
7.4
7.8
12.2
13.4
2908
2.29
090
18.6
7.6
8.0
13.2
14.4
3200
2.46
100
24.2
9.8
10.9
17.5
19.5
4163
2.47
150
30.4
12.6
14.4
21.1
24.2
5231
2.41
200
39.3
16.0
17.8
27.4
30.5
6766
2.46
Standard
A-P
Standard
A-P
Standard
A-P
Standard
A-P
21.6
22.6
11.1
12.1
66.6
67.6
37.6
38.6
24.6
25.6
11.6
12.6
87.6
88.6
40.6
41.6
24.7
25.7
12.6
13.6
117.6
118.6
71.6
72.6
13.7
14.9
77.2
78.4
15.4
16.6
77.2
78.4
17.0
18.2
77.2
78.4
20.4
21.6
105.2
106.4
27.4
29.3
90.9
92.8
30.8
33.8
92.6
95.6
40.8
43.8
125.6
128.6
2/1
2/1
2/1
10000
12000
16000
2
2
2
1
1"1/4
100
8
1
1"1/4
100
8
1
1"1/4
100
kW
230V 1~
400V 3N~
230V 1~
400V 3N~
%
Type
n° / circuits
m³/h
n°
Ø IN/OUT
dm³
l
l
MODEL CL “H”
Cooling capacity
kW
Total input power
kW
230V 1~
Total input current cooling
A)
mode
400V 3N~
Water flow rate
EER
Heating capacity
kW
Total input power
kW
Total input current heating
mode (A)
l/h
230V 1~
400V 3N~
Water flow rate
COP
ELECTRICAL DATA
Parr load
Compressor
Refrigerant
Total air flow rate
Type of fan
Number of fans
Evaporator
Water content heat exchanger
Buffer tank volume
Expansion tank volume
l/h
230V 1~
400V 3N~
230V 1~
400V 3N~
%
Type
n° / circuits
n°
Ø IN/OUT
dm³
l
l
0-100
0-100
1/1
1/1
1/1
3400
4000
4000
1
1
1
1
1"1/4
50
2
1
1"1/4
100
5
1
1"1/4
100
5
0-100
0-100
0-100
0-100
Scroll
1/1
1/1
1/1
1/1
R410A
6500
7500
8000
8500
Plug Fan - EC Inverter Motor
1
1
1
1
Plates
1
1
1
1
1"1/4
1"1/4
1"1/4
1"1/4
100
100
100
100
5
5
5
5
8
025
6.4
2.7
2.9
12.8
13.8
5.8
6.8
1105
2.35
8.2
2.6
2.8
11.9
12.9
5.6
6.6
1406
3.17
030
8.0
3.5
3.7
16.3
17.3
7.4
8.4
1383
2.30
10.1
3.3
3.5
15.2
16.2
7.0
8.0
1740
3.11
040
9.6
4.5
4.7
19.4
20.4
9.2
10.2
1657
2.16
12.3
4.3
4.5
17.2
18.2
8.2
9.2
2113
2.87
050
12.0
4.4
4.8
7.4
8.6
2056
2.74
15.0
4.3
4.7
7.3
8.5
2572
3.48
070
14.0
5.0
5.4
8.7
9.9
2413
2.80
16.5
4.9
5.3
8.7
9.8
2833
3.36
080
15.6
5.8
6.2
10.3
11.4
2679
2.70
19.2
5.6
6.0
10.1
11.2
3304
3.43
090
18.5
7.7
8.1
13.4
14.6
3180
2.39
21.7
7.2
7.6
12.8
14.0
3736
3.01
100
24.0
8.9
10.0
15.0
16.9
4126
2.71
28.8
8.3
9.4
14.2
16.2
4958
3.48
150
31.4
11.6
13.4
20.3
23.4
5394
2.70
36.7
10.5
12.3
18.9
22.0
6307
3.49
200
38.3
16.0
17.8
27.4
30.5
6590
2.39
42.7
14.7
16.4
25.9
29.0
7346
2.91
Standard
A-P
Standard
A-P
Standard
A-P
Standard
A-P
18.8
19.8
11.0
12.0
86.1
87.1
44.6
45.6
23.7
24.7
12.0
13.0
95.5
96.5
44.6
45.6
26.5
27.5
13.3
14.3
98.6
99.6
58.6
59.6
13.5
14.7
64.2
65.4
14.7
15.9
74.2
75.4
15.2
16.3
94.2
95.4
20.4
21.6
105.2
106.4
27.0
29.0
77.7
79.6
30.3
33.4
109.3
112.4
40.8
43.8
125.6
128.6
2/1
2/1
2/1
10000
12000
16000
2
2
2
1
1”1/4
100
8
1
1”1/4
100
8
1
1”1/4
100
8
All
All
A
A-P
0-100
0-100
0-100
1/1
1/1
1/1
3400
4000
4000
1
1
1
1
1”1/4
50
2
1
1”1/4
100
5
1
1”1/4
100
5
0-100
0-100
0-100
0-100
Scroll
1/1
1/1
1/1
1/1
R410A
6500
7500
8000
8500
Plug Fan - EC Inverter Motor
1
1
1
1
Plates
1
1
1
1
1”1/4
1”1/4
1”1/4
1”1/4
100
100
100
100
5
5
5
5
Heating
entering water temperature 40 °C
leaving water temperature 45 °C
external air temperature 7 °C db / 6 °C wb
Size 025 to 090
Size 100 to 200
A
A
0-50-100 0-50-100 0-50-100
VERSION
Standard
Standard
A-P
Standard
A-P
Standard
A-P
All
Standard
Standard
Standard
A-P
Standard
A-P
Standard
A-P
All
Standard
m³/h
Cooling
external air temperature 35 °C
∆t = 5 K
128
All
All
A
A-P
0-100
Dimensional Data (mm)
B
C
B
Model « ° - H »
Height (A)
mm
Width (B)
mm
Depth (C)
mm
VERSION
°-P-A
°-P
A
°-P-A
025
1028
1000
1358
650
030
1281
1000
1450
700
040
1281
1000
1450
700
050
1281
1150
1600
750
070
1281
1150
1600
750
080
1281
1150
1600
750
090
1281
1150
1600
750
C
100
1685
150
1685
200
1685
2010
2010
2010
845
845
845
Discharge hood possible configurations (site modified)
0-50-100 0-50-100 0-50-100
Cod.:SCLUY.00 /1202
MODEL CL “°”
Cooling capacity
129
SRA
Accessories
Heat pumps only for hot water production systems, up to 65°C,
and domestic hot water up to 50 °C
Heating capacity from 10 up to 18 kW
• VT: Anti-vibration supports, a group of four antivibrating supports to be placed under the sheet
steel foundation of the unit.
• DHW: Management kit with the components
necessary for production of domestic hot water
(anti-legionella cycle included).
• S...S: Domestic hot water storage, available in
300, 400, and 500 litres (S300S, S400S, and
S500S).
• S...I: System storage; available in 200, 300, 400,
and 500 litres (S200I, S300I, S400I, and S500I)
• RXS: Domestic hot water storage resistance; available in 3kW single phase (RXS3M), or in 3 - 6 - 8
kW three phase (RXS3T, RXS6T, RXS8T).
• MODU-485A: RS-485 interface for supervision
versions available:
remote control max. 18 units in RS485 network;
• PR3: Simplified remote panel. This makes it possible to carry out the unit's basic controls with the
signalling of alarms. Can be made remote with
shielded cable up to 150 m.
• Compatibility with the VMF system
VMF-CRP
VMF-VOC
VMF-ACS
VMF-E5B|N
For more information refer to the documentation
dedicated.
Mod. SRA
VT
modu-485a
AERWEB300
PR3
S300S
S400S - S500S
S200I - S300I - S400I -S500I
10M
15
✔
✔
✔
✔
✔
✔
10T
15
✔
✔
✔
✔
✔
✔
14M
15
✔
✔
✔
✔
✔
✔
14T
15
✔
✔
✔
✔
✔
✔
19T
15
✔
✔
✔
✔
✔
Compatibility between domestic hot
water storage and domestic storage
resistance (RXS)
RXS3M
RXS3T
RXS6T
RXS8T
S300S
✔
✔
✔
S400S
✔
✔
✔
S500S
✔
✔
✔
Unit selection
•STANDARD VERSION
•VERSION EQUIPPED WITH CIRCULATION PUMP
•VERSION EQUIPPED WITH oversized PUMP
hot water production for system, up to 65 °c
Priority directed to domestic hot water (A.C.S.) up to 50 °C
Features
SRA is a line of heat pumps with air-cooled condensing units that use the refrigerant R470C.
They heat water up to 65°C and can operate
down to -15°C, with prioritized production of
domestic hot water. These are external units
with hermetic Scroll compressors that perfectly
meet the needs of the residential and services
markets: reduced dimensions, easy installation,
and quiet.
High energy efficiency
SRA heat pumps were designed to offer high
efficiency in all use conditions. Particular care
was taken with the heat pump performance. The
components chosen provide high energy efficiency, with a notable decrease in consumption.
Performance down to -15 °C
SRA heat pumps were designed with a focus on
winter performance. Next generation regulation
guarantees that the heat pump will function
well beyond the normal limits of traditional
units.
maintain water temperature at the perfect level.
Dynamic set point
SRA heat pumps come with an external air temperature sensor. Based on the external conditions, the regulator automatically modifies the
system's water temperature set point, improving
energy efficiency for the system.
Priority directed to domestic hot water (A.C.S.)
The unit guarantees production of domestic hot
water up to 50 °C, as long as the appropriate
domestic hot water storage (ACCESSORY) is
included, and the guarantee is valid for both
summer and winter.
Advantages
The technological choices made, always focused on maximum quality and the use of the
most innovative technology, mean that SRA
offers high efficiency, easy installation, and a
wide range of usage options.
• Available in three sizes
As a option is possible installation integrated • SRA°: Heat pump with production of domeresistance
stic hot water. Available with three-phase or
SRA heat pumps can be integrated with resistansingle-phase power supply. The single-phase
ce directly managed by the unit's electronics.
version comes with soft-start installed.
Resistance activation depends on external air • SRA P: Heat pump with production of dometemperature and the temperature of the water in
stic hot water. Available with three-phase or
the system, making it possible to constantly
single-phase power supply and integrated
130
ON-OFF pump. (A heavy duty pump is also
available “N”.)
Technical Features
• High output scroll compressor and low electricity consumption
• Differential pressure switch
• Conforms to CE safety directives and to electromagnetic compatibility norms. Device
safety is guaranteed by the disconnecting
switch door lock found on the power supply
electrical panel, which is integrated in the
unit, as well as by active protection on the
main components
• Controls are accessible externally, with a user
interface display that shows all performance
parameters in four languages
• Next generation regulation
• Easy to use remote control panel with alarms
included
By judiciously combining the numerous options available, each model can be configured in a way that satisfies the most specific system needs.
Configuration rules:
1 2 3
45
6
7
8
9
||||||
Code
||||
Power supply
|Soft-start kit| version
Size
electric resistances
Code:
SRA
Size:
10 - 14 - 19
Version:
° - Standard
P - with pump
N - with oversized pump
Soft-start:
(factory installed for single phase versions)
° - Standard
S - With Soft-start kit (to be factory installed)
Integrated resistances:
° - Without integreted resistance
R - With electric resistances
Power supply:
M - 1~ 230V 50Hz (only for sizes 10 and 14)
T - 3N~ 400V 50Hz
SRA
131
Technical data
Technical data (400V/3N/50Hz)
Mod. SRA
°
Heating capacity
P
°
3,69
-
-
2,61
13,1
14,1
14,5
3,98
3,79
1730
1700
18
62
91
22,4
23,3
45
100
-
2,29
2,41
4,6
3,6
4,0
4,41
4,18
1740
1720
19
61
90
7,4
8,3
30
42
3,57
3,62
6,1
7,1
7,7
3,95
3,84
2430
2390
36
51
82
11,4
12,3
46
66
4,70
4,52
8,8
9,8
10,4
3,87
3,80
3150
3120
39
35
70
15,4
16,4
73
104
1/1
0 - 100
1/1
0 - 100
1
F / 1"¼
1
F / 1"¼
1
F / 1"¼
2
6.800
2
6.800
70
38
71
39
P
°
P
N
°
P
H
H
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
n°
kW
All
All
n°
m3/h
2
7.200
2
7.200
1
11,5
Axial
2
6.800
All
All
dB(A)
dB(A)
69
37
69
37
70
38
Heating capacity
Total power input
C.O.P.
Water cond. flow rate (1)
Pressure drops
Available pressure
Air flow rate
Sound pressure
Sound power
°
P
°
P
°
P
P
All
All
All
kW
kW
kW
kW
kW
kW
l/h
kPa
kPa
m3/h
dB(A)
dB(A)
SRA10T
8,03
7,95
2,25
2,37
SRA14T
11,33
11,17
3,45
3,49
SRA19T
15,06
14,58
4,76
4,56
3,569
3,284
3,164
3,354
1720
19
61
7200
37
69
3,201
2430
37
51
6800
38
70
3,197
3180
40
44
6800
39
71
TECHNICAL DATA UNI EN 14511-2: 2008
NOTE:
A Ambient air temperature
W Condenser outlet water temperature
(1) The water flow rate declared:
Condenser inlet water temperature
30°C
Condenser outlet water temperature.
35°C
Ambient air temperature 7°C b.s. / 6° C b.u.
Sound power
measurements made in compliance with the ISO 9614-2
Standard, in agreement with that requested by Eurovent
certification
Sound pressure
Sound pressure in free field conditions on reflective surface
(directivity factor Q=2) at 10 mt from the external surface of
unit, in compliance with ISO 3744 regulations.
Dimensions (mm)
384
1124
Sound pressure
Measured in a free field frontal distance, 10
m and directionality = 2, in conformance
with ISO 3744 norms
428
SRA (°/P/N)
Height
Width
Depth
mm
mm
mm
10
1252
1124
384/428
14
1252
1124
384/428
19
1252
1124
384/428
Cod.: SSRAUY.03 / 1201
Sound power
Aermec determines the value, based on the
measurements made, in accordance with ISO
9614-2 norms
A2/W35
1252
Input temperature 30°C;
Output temperature 35°C;
∆t 5°C
External air temperature 7bs / 6bu
-
1
F / 1"¼
°
Water cond. flow rate
-
2,52
N°
Ø
P
Heating
Condenser
19T
18,34
18,15
All
All
C.O.P.
Performance is in line with norms
UNI EN 14511-2: 2008
14T
14,10
13,9
1/1
0 - 100
°
Peak current
with soft start (LRA)
Compressors
N° compressors/N° circuits
Part load
Refrigerant
Condenser
Number
Integrated resistance OPTIONS
Number
Capacity
Fans
Number
Air flow rate
Sound data
Sound power
Sound pressure
14M
14,00
13,8
-
1/1
0 - 100
P
N
Peak current
with soft start (LRA)
10T
10,10
10,08
n°/n°
%
type
°
Available pressure
10M
10,03
9,9
-
All
P
Pressure drops
kW
kW
kW
kW
kW
kW
kW
kW
A
A
A
A
A
A
W/W
W/W
W/W
W/W
l/h
l/h
l/h
l/h
kPa
kPa
kPa
A
A
A
A
A
A
A
A
3,74
21,0
22,0
22,6
3,79
3,69
2410
2370
36
52
83
31,4
32,3
45
162
Scroll
1/1
0 - 100
R407C
Plate
1
F / 1"¼
Total power input
Total current input
230V/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
230/1
400V/3N
132
133
SWP
Dimensional Data (mm)
SWP 200 - SWP 300
SWP 200 S1 - SWP 300 S1
SWP 200 S2 - SWP 300 S2
High temperature air cooled heat pumps for the production of domestic
hot water
Technical Data
Unit dimensions
Features
The SWP heat pumps use the thermal energy of
air for production of domestic hot water. The
process occurs in the most efficient and profitable way with average COPs > 3. The energy
advantage of the SWP heat pumps also safeguards the environment, using most of its energy from solar radiation. Easy installation, silent
and reliable functioning and very low maintenance requirements complete the benefits of
this highly ecological and economic system.
Main features
• Steel tank with a double vitrification layer
with storage capacity of 200 litres, (models
SWP 200, SWP 200 S1 and SWP 200 S2) and
300 litres, (SWP 300, SWP 300 S1 and SWP
300 S2)
• Condenser wrapped externally to the boiler
with no scales and refrigerant-water fluid
contamination
• Auxiliary coil to be used together with a boiler or solar panels
• Integrated NTC sensor to control the water
temperature
• External air sensor for automatic connection
of the electric heater with unfavourable tem-
134
peratures in heat pump mode
• Anti-corrosion magnesium anode
• Hydraulic connections located at rear of unit
• Thermal insulation made of very thick
expanded polyurethane foam with a silver
grey RAL 2006 external covering (ABS)
• Adjustable support feet
• Environmentally friendly refrigerant R134a
• Electric heater 1.5 kW 230V
• IEC power supply connector with insulating
sheath
• High pressure safety devices
• Reciprocating hermetic compressor
• Radial fan with an adjustment of 40 % of the
nominal flow rate
• Electronic controller:
- water set point adjustment
- external air temperature sensing
- auto-diagnostic with display of the high/low
pressure alarm, water overheating alarm and
disconnected sensors alarm
- record of run hours
- control of minimum time between successive
compressor starts
- setting of parameters from the keyboard
- control of electric heater in manual mode or
in supplementary automatic mode for low
external temperatures
- periodic antibacterial treatment cycle to eliminate and prevent Legionella from developing
- user display to set the operating mode and
various parameters with different levels of
accessibility by means of passwords
Possible configurations
• Standard where the heat pump and the electric heater are the source of heat (SWP 200
and SWP 300)
• With auxiliary coil to be used together with a
boiler or solar panels (SWP 200 S1 and SWP
300 S1)
• With double auxiliary coils for simultaneous
use of three heat sources (SWP 200 S2 and
SWP 300 S2)
Packaging dimensions
V-Ph-Hz
W
W
°C
°C
W
W/W
A
A
Type / number
Type / number
m3/h
dB(A)
dB(A)
m
mm
bar
dB(A)
Kg
Kg
L
Height
Width
Depth
Height
Width
Depth
swp 200 swp 200 s1 swp 200 s2 swp 300 swp 300 s1 swp 300 s2
230 - 1 - 50 230 - 1 - 50 230 - 1 - 50 230 - 1 - 50 230 - 1 - 50 230 - 1 - 50
2.150
2.150
2.150
2.150
2.150
2.150
1500
1500
1500
1500
1500
1500
60
60
60
60
60
60
+8*/+35
+8*/+35
+8*/+35
+8*/+35
+8*/+35
+8*/+35
640
640
640
640
640
640
3,3
3,3
3,3
3,3
3,3
3,3
3,9
3,9
3,9
3,9
3,9
3,9
6,8
6,8
6,8
6,8
6,8
6,8
reciprocating/1
centrifugal/1
450
450
450
450
450
450
59
59
59
59
59
59
71
71
71
71
71
71
10
10
10
10
10
10
160
160
160
160
160
160
6
6
6
6
6
6
52
52
52
52
52
52
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1”
1”
1”
1”
1”
1”
79
101
86
116
94
134
100
122
107
137
115
155
200
300
1.670
1.865
660
660
660
660
2.050
2.050
770
770
770
770
* default settings
e Sound pressure measured in free field at a distance of 10m from the front and directivity factor = 2. In accordance with ISO 3744.
Performances in accordance with EN 255-3
Heating:
Condenser
Inlet temperature
15 °C
Outlet temperature
50 °C
External air temperature 15 °C
Installation Examples
Cod.: SSWPUY.00 / 1010
• AIR COOLED HEAT PUMPS FOR HOT WATER PRODUCTION UP TO 60°C (UP TO 70°C WITH
AUXILIARY ELECTRIC HEATER)
• APPLICATION RANGE: IN HEAT PUMP WITH AIR INTAKE FROM 8°C to 35°C (EXTENDED
FROM -15°C to 45°C WITH THE AID OF THE AUXILIARY ELECTRIC HEATER)
• VERSIONs WITH 200 or 300 litREs STORAGE TANK, OR WITH 1 OR 2 COILS TO BE USED
TOGETHER WITH OTHER HEAT SOURCES (SOLAR PANELS, BOILER, HEAT PUMP)
• AUTOSTART FUNCTION FOR THE UNIT TO RESTART AUTOMATICALLY Mod.
Voltage - phases - frequency
Heating capacity in heat pump mode
Electric heater power
Maximum water temperature
Intake air operating range
Total input power
COP
Max total input current in heat pump mode
Max total input current in electric heater mode
Compressor
Fan
Air flow rate
Min sound power
Max sound power
Max ducted length
Air ducts minimum diameter
Working pressure
eSound pressure level
DHW hot water flow connection
DHW cold water return connection
Heating system return connection
Heating system flow connection
Recirculation connection
Alternative heat source 1 and 2 return connection
Net weight
Gross weight
Storage tank capacity
135
SRP
SRP
High Temperature AIR/WATER Heat Pump only
With “PLUG FAN” fans and heating capacity from 10 up to 19 kW
QLT M (single-phase units without domestic water resistors)
14M
14T
19T
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
QLT RM (single-phase units with domestic water resistors)
QLT T (three-phase units without domestic water resistors)
R407C
10T
Compulsory accessories:
QLT RT (three-phase units with domestic water resistances)
FV
COVE
✔
✔
✔
✔
✔
✔
Optional accessories:
TASRP
TADSRP
VT 9
AERWEB300 (SRP-V1)
S300S
S400S - S500S
S200I - S300I - S400I -S500I
✔
✔
✔
✔
✔
✔
✔
RXS3M
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
RXS3T - RXS6T - RXS8T
✔
✔
✔
Compatibility between domestic hot water (DHW) tanks and electric resistors for domestic water storage (RXS)
S300S
S400S
S500S
✔
✔
✔
✔
✔
✔
✔
✔
✔
Is there a version marked by the initials V1, equipped with simplified electronics can handle the drive and the production of hot
water;
installazione interna
Outdoor installation
Electrical panel
technical room
• HEAT PUMP unit TO PRODUCE HOT WATER UP TO 65°C WITH EXTERNAL TEMPERATURE OF -20 °C • operating limits FROM -20°C up to 42°C (ambient TEMPERATURE)
Choice of Unit
Features
• Maximum safety under all working conditions.
These heat pumps can produce hot water up to
65°C. They can also operate with outside temperatures ranging between -20°C and 42°C, always
ensuring continuous operation.
• Available in 3 sizes and two versions
• Outdoor or indoor installation
• Possible plants layout : no. 70 - 71 - 72 - 74 (ref. to
technical / installation mnaual)
Main characteristics:
• Water filter
• Safety valve
for enhanced efficiency
• Scroll type compressors
• Electric resistor for platetype exchanger.
- High level of reliability
• PLUG-FAN fan with highhead and particularly
- High efficiency
silent operation
• Electronic regulator capable of managing a double • The units are characterised by being very compact
function- controlling the heat pump
and are varnished with polyester powders to proand managing the hydraulic system components
tect them against atmospheric agents.
(Storage system, domestic hot water (DHW) storage, a three-way valve (1 max), mixing valve (1
max), pumps (3 max), probes, etc.).
• Platetype exchanger externally insulated with a closed cell cover that minimises heat loss. Optimised
136
Field configurer:
1 2 3
4 5 6
7
8
9
|| ||||
Code
| Ventilation
|Supplementary
|
|
|
elect. resistance
|
Size Soft start kit
|
Power supply
By suitably combining the numerous options available, it is possible to configure each model in such a way as to meet the most
particular of system requirements.
Code:
SRP
Accessories
• VT: Anti-vibration mountings, set of four vibrationdamping components to fit under the steel base of the unit.
• S...S: Domestic hot water (DHW) storage; available in
three different capacities: 300, 400 and 500 litres
(S300S, S400S and S500S).
• RXS: Electric resistors for domestic hot water (DHW) storage; available in two models: single-phase, 3 kW
(RXS3M), or three-phase, 3 - 6 - 8 kW (RXS3T, RXS6T,
RXS8T).
• S...I: Storage system; available in four different capacities: 200, 300, 400 and 500 litres (S200I, S300I, S400I
and S500I).
versions available:
AERWEB300-18: Web server to monitor and remote control max. 18 units in RS485 network;
With the SRP - V1 is no longer necessary accessories QLT, and TDASRP TASRP; for remote control of this version is available PR3 AERWEB300 and accessory kits are 2 pumps (for KPSRP14 SRP10-14 / KPSRP19 for SRP19) Optional accessories only at the factory.
Compatibility with the VMF system: VMF-CRP - VMF-VOC - VMF-ACS - VMF-E5B|N - For more information refer to the
documentation dedicated.
Example of commercial code:
SRP 14 ° ° ° T - V1 (with simplified electronic version)
• TASRP: Room temperature probe, it allows users to set
the room air value, with a correction of ±3°C.
• TADSRP: Room temperature probe with display, it offers
all the same functions available with Elesta control electronics.
• QLT: (Obligatory accessory) Electrical panel of the technical room containing the Elesta control electronics, and
the power and safety components necessary for the unit
to function; this accessory is available in different presentations (wired according to the type of unit chosen):
- QLT10RT, electrical panel for SRP10 with domestic hot
water (DHW) storage managed by a three-phase resistor;
- QLT10T, electrical panel for SRP10 , three-phase standard;
- QLT14RM, electrical panel for SRP14 with domestic hot
water (DHW) storage managed by a single-phase resistor;
- QLT14M, electrical panel for SRP14 , single-phase standard;
• FV: (Compulsory Accessory) Flange for airside channelling, needed for indoor installation;
• COVE: (Compulsory accessory) Upper metal cover, needed for Outdoor installation , painted with polyester
powders to protect units against atmospheric agents;
Size:
10 - 14 - 19
Ventilation:
° - Standard
Supplementary elect. resistors:
° -Standard (without supplementary electric resistors)
R - With supplementary electric resistors
Power supply: *
M- 230V~50Hz
T - 400V 3N~ 50Hz
Soft-start:
(standard for the single-phase version)
° - Standard
S - With Soft-Start kit (to be assembled in the factory)
* Single-phase supply available only for SRP 14M.
137
Installation example
Dimensions (mm)
indoor installation
B
A
B
SRP
buffer
tank system
Domestic
hot water
SRP
C
buffer
tank
system
Domestic
hot water
(DHW) storage
(DHW) storage
Technical data
Mod.
Heating capacity
Total power input
Total current input
Starting current with soft start
Starting current
COP
Water flow rate
Pressure drops
Sound pressure
Sound power
Air flow rate
Supporting electric resistors
kW
400V 3N~ 50Hz
230V ~ 50Hz
400V 3N~ 50Hz
230V ~ 50Hz
400V 3N~ 50Hz
230V ~ 50Hz
400V 3N ~ 50Hz
kW
A
A
A
W/W
l/h
kPa
dB(A)
m3/h
(IN)
(OUT)
ø
kW
Data stated according to EN14511: 2008
Heating:
- water outlet temperature 35 °C;
- outside air temperature 7 °C B.S., 6 °C B.U.;
- ∆t = 5 °C.
srp10T
10
2,6
/
5,9
/
30
/
43
3,85
1.720
12,5
34,7
66,7
3.500
1”¼
1”¼
8,2
SRP14M
14,0
/
3,66
/
22,0
/
45
/
3,82
2.410
24,0
35,5
67,5
3.500
1”¼
1”¼
11,5
SRP14T
14,1
3,4
/
7,3
/
46
/
67
4,15
2.425
24,0
35,5
67,5
3.500
1”¼
1”¼
11,5
SRP19T
19,1
4,72
/
11,7
/
73
/
105
4,05
3.285
30,0
41,0
73,0
5.000
1”¼
1”¼
15,5
Height
A
Width
B
Depth
C
Weight
kg
Outdoor Installation
Indoor installation
Indoor installation
Indoor installation
SRP10 T
1427
1115
1322
812
1392
284
242
SRP14 M/T
1427
1115
1322
812
1392
297
255
SRP19 T
1427
1115
1322
812
1392
315
273
Sound pressure Measured in a free field frontal distance, 10 m and
directionality = 2, in conformance with ISO 3744 norms
Sound power Aermec determines the value, based on the measurements
made, in accordance with ISO 9614-2 norms
Technical data (400V/3N/50Hz)
TECHNICAL DATA UNI EN 14511-2: 2008
NOTE:
A Ambient air temperature
W Condenser outlet water temperature
1 The water flow rate declared:
Condenser inlet water temperature.
Condenser outlet water temperature.
Ambient air temperature 138
kW
kW
kW
l/h
kPa
m3/h
dB(A)
dB(A)
30°C
35°C
7°C b.s. / 6° C b.u.
SRP10T
7,62
2,17
3,52
1680
12
3500
35
66,7
SRP14T
11,33
3,29
3,44
2430
24
3500
36
67,5
SRP19T
15,34
4,56
3,36
3290
30
5000
41
73
Sound power
Aermec determines sound power values on the basis of measurements
made in compliance with the ISO 9614-2 Standard, in agreement with
that requested by Eurovent certification
Sound pressure
Sound pressure in free field conditions on reflective surface (directivity
factor Q=2) at 10 mt from the external surface of unit, in compliance
with ISO 3744 regulations.
Cod.: SSRPUY.08 / 1202
A2/W35
Heating capacity
Total power input
COP
Water flow rate 1
Pressure drops
Air flow rate
Sound pressure
Sound power
139
NRL
Mod. NRL
AER485
dualchiller
multichiller
PGS
AERWEB300
TRX1
Air cooled chillers with axial fans
Cooling capacity from 53 kW to 150 kW
VT (00-P1-P2-P3-P4)
VT (01-02-03-04-05-06-07-08-09-10)
R410A
(1)DCPX
(1) DCPX
(version with high static pressure fan)
DRE
GP
RIF
PRM1
TP3
Aermec
program:LCP/A/P/C
- 2 cooling circuits
- pump ASSEMBLY OPTION
- pump ASSEMBLY and BUFFER
tank OPTION
Characteristics
EHigh efficiency low noise cooling
only (sizes 280-700)
C
Condensing unit
• Expansion valve (selected in unit configurator):
(°) standard thermostatic expansion valve
(Y)thermostatic expansion valve for low liquid
temperature down to -6 °C
(X)electronic expansion valve
• Fan unit (selected in unit configurator):
-“°”Standard
- “M” High static pressure
-“J” Inverter
• Pump assembly and buffer tank options complete
with water filter, flow switch, expansion tank,
charging point, and anti-freeze electric heater
• Microprocessor control system:
- Control from the entering water temperature, with the possibility of selecting control
of the leaving water temperature
-Summer condensation control with 0-10V
modulating signal depending on pressure,
compensated according to the outside air
temperature (with DCPX accessory)
- A utomatic rotation of compressors and
pumps based on operating hours
- Load limiting safety control
- Low and high pressure transducers (for sizes
280-350 the TP3 accessory is available)
- Display in 4 languages
- Alarm history
off cycles) and different programmes for each
day of the week.
• RIF: Power factor correction. Connected in
parallel to the motor allowing about 10%
reduction of input current. Must be requested
at time of order and is available factory fitted only.
versions available:
AERWEB300-6G: Web server to monitor and remote control max. 6 units in RS485 network with
integrated GPRS modem;
• DUALCHILLER: Simplified control system to
switch on/off and control two chillers in a
single system (using Aermec GR3 command),
as if they were a single unit.
• MULTICHILLER: Control system for multiple
parallel installed constant flow chillers providing individual chiller on/off and control
capability.
• TRX1: Metal cap that replaces the plastic cap,
mounted as shipping protection, for immersion heater holes in the buffer tank.
• PRM1: FACTORY FITTED ACCESSORY. A
manual reset pressure switch wired in series
with the existing high pressure switch
installed on the compressor discharge line.
• TP3: High pressure transducer linked to the
controller generates a pre-alarm in the case
of high operating pressure (only for sizes
280-350).
Accessories
• AER485: RS-485 interface for supervision systems with MODBUS protocol.
• VT: set of four anti-vibration mounts, to be fitted below the unit base.
• DCPX: Low ambient device for cooling operation below 10 °C down to -10 °C. Pressure
transducers read the condensing pressure and
the electronic controller varies fan speed to
maintain adequate pressure for correct unit
operation. It also allows a correct operation
by heating with external temperatures above
30 ° C and up to 42 ° C.
• DRE: Soft starter (current reduction of about
30% for single circuit units, 26% for two circuit units, 22% for three circuit units). Only
available for 400V-3-phase power supply.
• GP: Protection grille protects the external coil
from accidental damage.
• PGS: Daily/Weekly Programmer. Allows two
daily time-clock programmes (two switch on/
140
280
✔
✔
✔
✔
✔
✔
17
17
13
13
56
56
60
61
281
3
3
50
✔
✔
300
330
350
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
17
17
17
17
17
17
13
13
13
13
13
13
56
56
56
56
57
57
60
60
61
61
61
61
301
331
351
3
3
3
4
4
4
50
50
51
✔
✔
✔
✔
✔
✔
Note:
Sizes 280,300,330,350 are only available in versions L - E.
• COMPACT version • LOW NOISE COMPACT version
• HIGH EFFICIENCY VERSION
• LOW NOISE HIGH EFFICIENCY
VERSION
• 2 refrigerant circuits
• High efficiency even at part load
• Heat exchangers optimised to benefit from the
excellent heat transfer characteristics of R410A
• High efficiency scroll compressors
• Axial fans with low sound level
• Solid construction with polyester anti-corrosion painted finish
• Operating limits in cooling up to 46 °C ambient
°
Compact cooling only (sizes 500-700)
L
Compact low noise cooling only (sizes 280-700)
A
High efficiency cooling only (sizes 500-700)
Vers.
All
All
All
All
All
All
°-L
A-E
°-L
A-E
°
L
A
E
°
L
A
E
All
°-L
A-E
All
All
All
500
✔
✔
✔
✔
✔
✔
13
13
10
10
64
standard
64
standard
64
standard
64
standard
501
2 (x2)
2 (x2)
52
✔
standard
550
✔
✔
✔
✔
✔
✔
13
13
10
10
64
standard
64
standard
64
standard
64
standard
551
2 (x2)
2 (x2)
52
✔
standard
600
✔
✔
✔
✔
✔
✔
13
13
10
10
64
standard
64
standard
64
standard
64
standard
601
2 (x2)
2 (x2)
53
✔
standard
650
✔
✔
✔
✔
✔
✔
13
13
10
10
64
standard
64
standard
64
standard
64
standard
651
2 (x2)
2 (x2)
53
✔
standard
700
✔
✔
✔
✔
✔
✔
13
22
10
22
64
standard
64
standard
64
standard
65
standard
701
2 (x2)
2 (x3)
53
✔
standard
(1) Accessory DCPX includes: DCPX + TP3
Unit Configurator
By suitably combining the numerous options available it is possible to configure each model in such a way as to meet even the most demanding of system
requirements.
Field configurator:
1 2 3
456
7
8
9
10
11
12
13
14
15 16
|||||||||| |
Code |Compressor| Model | Version |
Fan
|
Integrated
|||||
hydronic
Size
Expansion valve
Heat recovery Coil
Power supply
module
Code:
NRL
Size:
028, 030, 033, 035, 050, 055, 060, 065, 070
Compressor:
0 - R410A standard compressors
Expansion valve:
° - Standard thermostatic expansion valve for water temperature
down to +4 °C
Y - Thermostatic expansion valve for low liquid temperature down to -6 °C
X - Electronic thermostatic valve, max. temp. of water produced: +4°C
(for lower temperatures please contact us)
Model:
° - Cooling only
C - Condensing unit
Heat recovery
D - With partial heat recovery (desuperheater)
T - With total heat recovery
Version:
° - Compact
L - Compact low noise
A - High efficiency
E - High efficiency low noise
Coil:
° - Aluminium
R - Copper
S - Tinned copper
Fan:
° - Standard
M - High static pressure (sizes 280-700)
J - Inverter (sizes 500-700)
Power supply:
° - 400V 3N~ 50Hz with circuit breakers
1 - 230V 3~ 50Hz with circuit breakers
2 - 500V 3~ 50Hz with circuit breakers (contact head office for
versions with DCPX)
Integrated hydronic module:
00 - without pump or buffer tank
01 - single low head pump and buffer tank
02 - single and standby low head pump and buffer tank
03 - single high head pump and buffer tank
04 - single and standby high head pump and buffer tank
05-single low head pump and buffer tank (with holes for immersion
heaters)
06- single and standby low head pump and buffer tank (with holes
for immersion heaters)
07- single high head pump and buffer tank (with holes for immersion heaters)
08- single and standby high head pump and buffer tank (with holes
09 -double hydraulic circuit
10 -double hydraulic circuit with immersion heater
P1 - single low head pump without buffer tank
P2 - single and standby low head pump without buffer tank
P3- single high head pump without buffer tank
P4- single and standby high head pump without buffer tank
Attention:
– options D - T - C are not compatible with option Y
– size 350 is not available with 500V 3~ 50Hz power supply
Example of configuration code: NRL0350°°°°°°°00
This is an NRL unit of size 350, with standard thermostatic expansion valve, cooling only model, without heat recovery, compact version, with
aluminium condenser coils, standard fans, and electrical panel for compressor motors 400V 3N~ 50Hz, without pump or buffer tank.
141
Technical Data Version “C”
Mod. NRL
280
53
57
20,3
16,8
9120
9800
51
43
2,61
3,39
3,16
3,94
300
63
65
22,6
19,4
10840
11180
46
39
2,79
3,35
3,37
3,89
°
L
A
E
All
All
All
°
L
A
E
36
30
46
155
40
34
53
184
2/2
2/2
2/2
2/2
Evaporator
Type of hydraulic connections
°
L
A
E
°
L
A
E
All
All
14200
22000
4
6
14200
22000
4
6
(Ø)
All
2”½
2”½
2”½
2”½
2”½
2”½
(kW)
All
1,5
1,5
1,5
1,5
1,8
(kW)
All
1,1
1,1
1,1
1,1
(A)
All
2,7
2,7
2,7
(A)
All
3,6
3,6
°
L
A
E
°
L
A
E
All
°
L
A
E
°
L
A
E
104
113
143
152
300
73
74
41
42
106
114
144
153
300
73
74
41
42
Cooling capacity
Total power input
Water flow rate
Pressure drop
EER
ESEER
Power supply
Vers.
°
L
(kW)
A
E
°
L
(kW)
A
E
°
L
(l/h)
A
E
°
L
(kPa)
A
E
°
L
(W/W)
A
E
°
L
(W/W)
A
E
Total current input
(A)
Type of compressors
(A)
(A)
Compressors/circuits
Type of fans
Fan air flow rate
(m³/h)
Number of fans
(n°)
low-head pump
Input power
high-head pump
Input power
low-head pump
Input current
high-head pump
Input current
Useful pump head
low-head
cooling mode
(kPa)
Useful pump head
high-head
cooling mode
(kPa)
Sound power
 Pressure power
db(A)
db(A)
Cooling:
-
evaporating temperature 7 °C;
-
external air temperature 35 °C;
-
∆t = 5 °C.
142
330
350
500
550
600
97
103
126
68
81
87
93
113
98
104
129
74
83
90
95
117
34,8
38,2
45,9
26,1
28,4
38,5
42,5
50,9
30,2
34,2
40,1
21,8
25,1
33,1
36,7
44,3
16680
17720
21670
11700
13930
14960
16000
19440
16860
17890
22190
12730
14280
15480
16340
20120
53
59
64
54
55
43
48
51
44
49
54
35
42
37
41
44
2,79
2,70
2,75
2,61
2,85
2,26
2,19
2,22
3,25
3,04
3,22
3,39
3,31
2,72
2,59
2,64
3,43
3,32
3,87
3,15
3,45
3,40
3,30
3,83
3,83
3,59
4,28
3,94
3,84
3,78
3,55
4,15
400V 3N~ 50Hz with thermomagnetic switches
63
67
81
44
51
70
75
90
55
60
71
37
45
60
64
78
58
63
76
81
100
190
200
214
220
232
Scroll
3/2
3/2
4/2
2/2
2/2
3/2
3/2
4/2
3/2
3/2
4/2
2/2
2/2
3/2
3/2
4/2
Axial
34600
34600
34600
14200
20200
28400
28700
27700
34100
34100
32600
27000
27000
21100
22200
21800
2
2
2
4
6
2
2
2
2
2
2
8
8
2
2
2
Plates
Victaulic
650
137
127
143
129
53,9
57,6
44,6
51,6
23560
21840
24600
22190
61
52
60
49
2,54
2,20
3,21
2,50
3,58
3,56
4,26
4,13
700
156
144
163
150
60,0
64,8
52,3
56,6
26830
24770
28040
25800
74
63
68
58
2,60
2,22
3,12
2,65
3,67
3,65
4,15
4,02
88
99
77
89
112
243
100
111
90
97
122
261
4/2
4/2
4/2
4/2
4/2
4/2
4/2
4/2
34600
29400
32600
22800
2
2
2
2
33600
28600
50000
32500
2
2
3
3
2”½
2”½
2”½
1,8
3,0
3,0
3,0
1,5
1,5
1,5
1,5
1,8
2,7
3,6
3,6
3,6
3,6
5,0
3,6
3,6
5,0
5,0
5,7
5,7
5,7
96
114
135
153
300
74
75
42
43
89
104
129
140
300
75
76
43
44
123
141
127
140
161
179
166
179
500
82
77
82
74
50
45
50
42
111
130
117
132
150
168
156
171
500
82
77
82
74
50
45
50
42
91
117
94
117
184
210
188
215
500
82
77
82
74
50
45
50
42
83
103
76
104
178
198
172
201
500
83
78
83
75
51
46
51
43
91
117
78
106
134
162
140
170
500
83
78
85
77
51
46
53
45
Sound power
Aermec determines sound power values
in accordance with ISO 9614-2 as
 Sound pressure measured in free field
conditions at distance of 10m and
directivity factor = 2. In accordance
with ISO 3744.
- Power supply voltage: 400 V
Mod. NRL C
U.M.
Cooling capacity
(kW)
Total power input
(kW)
EER
(W/W)
(A)
(A)
Input current
(A)
Sound power
db(A)
 Sound pressure
db(A)
Vers.
°
L
A
E
°
L
A
E
°
L
A
E
All
All
°
L
A
E
°
L
A
E
°
L
A
E
280
55
59
20,5
17,0
2,67
3,46
46
155
36,3
35,3
73
74
300
65
67
22,8
19,6
2,85
3,42
53
184
40,4
39,4
73
74
330
70
76
26,3
22,0
2,66
3,47
58
190
44,4
43,4
74
75
350
83
85
28,7
25,3
2,91
3,38
63
200
51,5
49,4
75
76
41
41
42
43
42
42
43
44
Cooling:
- evaporating temperature 5 °C;
- external air temperature 35 °C;
- ∆t = 5 °C.
500
100
90
101
93
35,1
38,8
30,5
33,4
2,85
2,31
3,31
2,78
76
214
63,6
60,8
59,5
70,5
82
77
82
74
50
45
50
42
550
106
96
107
98
38,5
42,9
34,5
37,0
2,75
2,23
3,10
2,64
81
220
67,6
75,2
62,6
64,9
82
77
82
74
50
45
50
42
600
130
116
133
121
46,3
51,4
40,5
44,7
2,80
2,27
3,28
2,70
100
232
81,7
90,7
75,7
78,9
82
77
82
74
50
45
50
42
650
141
131
147
133
54,4
58,1
45,0
52,1
2,59
2,25
3,27
2,55
112
243
88,8
99,9
82,7
89,9
83
78
83
75
51
46
51
43
700
161
148
168
155
60,5
65,4
52,8
57,1
2,65
2,27
3,18
2,71
122
261
100,9
112,0
95,9
97,9
83
78
85
77
51
46
53
45
Sound power:
Aermec determines sound power values in accordance with ISO 9614-2
as required for Eurovent certification.
 Sound pressure measured in free field conditions at distance of 10m and
directivity factor = 2. In accordance with ISO 3744.
Dimensions (mm)
NRL 500-700
NRL 280-350
A
A
C
C
B
B
Mod. NRL
Height
Width
(mm)
(mm)
A
B
Length
(mm)
C
Weight
empty
(kg)
Vers.
All
All
°-L
A-E
°-L
A-E
280
1606
1100
2450
2450
675
686
300
1606
1100
2450
2950
684
751
330
1606
1100
2450
2950
688
761
350
1606
1100
2450
2950
704
767
500
1875
1100
2950
2950
868
955
550
1875
1100
2950
2950
872
959
600
1875
1100
2950
2950
968
1142
650
1875
1100
2950
2950
983
1155
700
1875
1100
2950
3950
1091
1323
Note:
Sizes 280,300,330,350 are only available in versions L - E.
143
Cod.: SNRLUY.05 / 1212
Technical Data
NRL
Mod. NRL
AER485
dualchiller
multichiller
PGS
AERWEB300
TRX1
Air-cooled heat pumps with axial fans
Capacity from 58 kW to 171 kW
VT (00-P1-P2-P3-P4)
R410A
VT (01-02-03-04-0506-07-08-09-10)
DCPX
DCPX vers. with high static pressure fans (*)
Aermec
program:LCP/A/P/C
DRE
GP
• COMPACT version • LOW NOISE COMPACT version
• HIGH EFFICIENCY VERSION
• LOW NOISE HIGH EFFICIENCY
VERSION
- 2 REFRIGERANT circuits
- pump ASSEMBLY and BUFFER
Tank OPTION
- H Standard compact heat pump
- HL Low noise compact heat pump
- HA High efficiency heat pump
- HE High efficiency low noise heat pump
- “°” standard thermostatic expansion valve
- “X” electronic expansion valve
• Fan type (selected in unit configurator):
- “°” Standard
- “J” Inverter
• Pump assembly and buffer tank options
complete with water filter, flow switch,
expansion tank, charging point, and antifreeze electric heater
- Control from the entering water temperature, with the possibility of selecting control of the leaving water temperature.
- Condensing control in summer with a 0-10
V modulating signal based on pressure and
compensated for external air temperature
(with DCPX accessory)
- E vaporating control in summer for heat
pump operation (with DCPX accessory)
- Intelligent defrost control on drop of pressure
- Automatic rotation of compressors and
pumps based on operating hours
- Low and high pressure transducers (standard for all units)
- Alarm history
day of the week.
• RIF: Power factor correction. Connected in parallel
to the motor allowing about 10% reduction of
input current. Must be requested at time of order
and is available factory fitted only.
versions available:
AERWEB300-6G: Web server to monitor and remote control max. 6 units in RS485 network with
integrated GPRS modem;
switch on/off and control two chillers in a single system (using Aermec GR3 command), as
if they were a single unit.
capability.
• PRM1: FACTORY FITTED ACCESSORY. A
manual reset pressure switch wired in series
with the existing high pressure switch
• TP3: High pressure transducer linked to the
controller generates a pre-alarm in the case of
high operating pressure (only for sizes 280350).
Accessories
• VT: set of four anti-vibration mounts, to be fitted below the unit base.
• DCPX: Low ambient device for cooling operation below 10 °C down to -10 °C. Pressure
30 ° C and up to 42 ° C.
144
280
✔
✔
✔
✔
✔
✔
17
17
13
13
58
58
63
63
281
3
3
50
✔
300
330
350
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
17
17
17
17
17
17
13
13
13
13
13
13
58
58
58
58
59
59
63
63
63
63
63
63
301
331
351
3
3
3
4
4
4
50
50
51
✔
✔
✔
500
✔
✔
✔
✔
✔
✔
13
13
13
13
10
10
10
10
64
standard
64
standard
501
2 (x2)
2 (x2)
2 (x2)
2 (x2)
52
✔
550
✔
✔
✔
✔
✔
✔
13
13
13
13
10
10
10
10
64
standard
64
standard
551
2 (x2)
2 (x2)
2 (x2)
2 (x2)
52
✔
600
✔
✔
✔
✔
✔
✔
13
13
13
13
10
10
10
10
64
standard
64
standard
601
2 (x2)
2 (x2)
2 (x2)
2 (x2)
53
✔
650
✔
✔
✔
✔
✔
✔
13
13
13
13
10
10
10
10
64
standard
64
standard
651
2 (x2)
2 (x2)
2 (x2)
2 (x2)
53
✔
700
✔
✔
✔
✔
✔
✔
13
13
22
22
10
10
22
22
64
standard
65
standard
701
2 (x2)
2 (x2)
2 (x3)
2 (x3)
53
✔
(*) DCPX not necessary for units with high static pressure fans (sizes 500 to 700). Fans are already fitted with speed controller.
Unit Configurator
requirements.
Characteristics
• Extended operating limits in heat pump operation:
- Maximum leaving water temperature 55° C
-M
aximum external air temperature 30° C
(42° C with fan speed controller accessory
DCPX)
• Cooling operation up to 46° C external air
temperature
RIF
PRM1
Vers.
All
All
All
All
All
All
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
All
H
HL
HA
HE
All
All
1 2 3
456
7
8
9
10
11
12
13
14
15-16
|||||||||| |
Fan
|
Integrated
|||||
hydronic
Size
Expansion valve
Heat recovery
Coil
Power supply
module
Code:
NRL
Size:
028, 030, 033, 035, 050, 055, 060, 065, 070
Compressor:
Expansion valve:
down to +4 °C
( for lower temperatures please contact us)
Model:
H - Heat pump
Heat recovery
T - With total heat recovery)
Version:
° - Standard compact
A - High efficiency
Coil:
° - Aluminium
R - Copper
S - Tinned copper
Fan:
° - Standard
M - High static pressure (sizes 280-350)
J - Inverter (sizes 500-700)
Power supply:
° - 400V 3N~ 50Hz with circuit breakers
versions with DCPX)
00- without pump or buffer tank
01 -single low head pump and buffer tank
02 -single and standby low head pump and buffer tank
03 -single high head pump and buffer tank
04 -single and standby high head pump and buffer tank
05 - single low head pump and buffer tank (with holes for immersion heaters)
06 - single and standby low head pump and buffer tank (with holes for immersion heaters)
Attention:
– the configurations XD and XT are not available (only for liquid temperatures below +4°C )
Example of configuration code: NRL0350°H°L°°°04
This is an NRL unit of size 350, with standard thermostatic expansion valve, heat pump model, without heat recovery, compact low noise, with
aluminium condenser coils, standard fans, and electrical panel for compressor motors 400V 3N~ 50Hz, and without pump or buffer tank.
145
Mod. NRL
Cooling capacity
Total power input
Water flow rate
Pressure drop
EER
ESEER
Heating capacity
Total power input
Water flow rate
Pressure drop
COP
Power supply
Total current input
Type of compressors
Type of fans
Fan air flow rate
Number of fans
Evaporator
Type of hydraulic connection
U.M.
Vers.
H
HL
(kW)
HA
HE
H
HL
(kW)
HA
HE
H
HL
(l/h)
HA
HE
H
HL
(kPa)
HA
HE
H
HL
(W/W)
HA
HE
H
HL
(W/W)
HA
HE
H
HL
(kW)
HA
HE
H
HL
(kW)
HA
HE
H
HL
(l/h)
HA
HE
H
HL
(kPa)
HA
HE
H
HL
(W/W)
HA
HE
All
H
HL
(A)
HA
HE
(A)
All
(A)
All
All
H
HL
HA
HE
All
H
HL
(m³/h)
HA
HE
H
HL
(n°)
HA
HE
All
All
(Ø)
All
280
51
53
20,1
17,9
8770
9120
47
20
2,54
2,96
3,16
3,94
58
59
18,6
17,3
9980
10150
61,1
24,8
3,12
3,41
300
61
62
22,5
20,0
10490
10660
43
27
2,71
3,10
3,37
3,89
68
69
21,3
20,3
11700
11870
53,6
33,5
3,19
3,40
33
31
46
155
38
36
53
184
2/2
2/2
2/2
2/2
14000
20000
4
6
20000
26000
6
8
2”1/2
2”1/2
330
350
500
550
600
90
95
115
66
73
83
90
110
94
100
122
69
77
90
95
114
36,4
40,5
49,1
26,2
31,0
39,7
42,9
51,8
30,4
33,6
41,0
23,0
26,6
33,1
36,4
45,0
15480
16340
19780
11350
12560
14280
15480
18920
16170
17200
20980
11870
13240
15480
16340
19610
46
50
53
51
45
39
45
49
33
36
36
23
27
30
32
31
2,47
2,35
2,34
2,52
2,35
2,09
2,10
2,12
3,09
2,98
2,98
3,00
2,89
2,72
2,61
2,53
3,43
3,32
3,87
3,15
3,45
3,40
3,30
3,83
3,83
3,59
4,28
3,94
3,84
3,78
3,55
4,15
99
106
129
75
82
99
106
129
103
110
135
76
86
103
110
135
33,2
36
43,1
24,3
27,8
33,2
36
43,1
31,2
33,8
40,1
22,5
25,8
31,2
33,8
40,1
17030
18230
22190
12900
14100
17030
18230
22190
17720
18920
23220
13070
14790
17720
18920
23220
55
62
67
65,6
56,4
55
62
67
40
44
44
27,9
33,7
40
44
44
2,98
2,94
2,99
3,09
2,95
2,98
2,94
2,99
3,30
3,25
3,37
3,38
3,33
3,30
3,25
3,37
400V 3N~ 50Hz with circuit breakers
66
71
87
41
50
72
75
91
55
59
72
38
46
60
64
79
58
63
76
81
100
190
200
214
220
232
Scroll
3/2
3/2
4/2
2/2
2/2
3/2
3/2
4/2
3/2
3/2
4/2
2/2
2/2
3/2
3/2
4/2
Axial
39400
39400
39400
20000
20000
28400
28700
28700
37000
37000
36500
26000
26000
20200
21100
21400
2
2
2
6
6
2
2
2
2
2
2
8
8
2
2
2
Plates
Victaulic
2”1/2
2”1/2
2”1/2
2”1/2
2”1/2
650
134
124
138
128
53,3
58,3
47,8
52,7
23050
21330
23740
22020
58
50
43
37
2,51
2,13
2,89
2,43
3,58
3,56
4,26
4,13
150
150
152
152
48
48
44,9
44,9
25800
25800
26140
26140
73
73
52
52
3,13
3,13
3,39
3,39
700
145
140
150
143
62,9
65,6
51,3
57,8
24940
24080
25800
24610
64
60
49
45
2,31
2,13
2,92
2,47
3,67
3,65
4,15
4,02
165
165
171
171
55,1
55,1
52,1
52,1
28380
28380
29410
29410
83
83
64
64
2,99
2,99
3,28
3,28
92
100
82
91
112
243
108
113
88
99
122
261
4/2
4/2
4/2
4/2
4/2
4/2
4/2
4/2
37500
27400
36500
22400
2
2
2
2
37500
28100
58000
31900
2
2
3
3
2”1/2
2”1/2
Mod. NRL
Input power
low-head pump
Input power
high-head pump
U.M.
Vers.
280
300
330
350
500
550
600
650
700
(kW)
All
1,1
1,1
1,1
1,1
1,5
1,5
1,5
1,5
1,9
(kW)
All
1,5
1,5
1,5
1,5
1,9
1,9
3,0
3,0
3,0
H
HL
HA
HE
H
HL
HA
HE
All
H
HL
HA
HE
H
HL
HA
HE
108
135
147
175
300
73
74
41
42
110
126
148
165
300
74
75
42
43
100
128
139
166
300
74
75
42
43
95
120
135
159
300
75
76
43
44
136
148
141
147
174
185
181
186
500
82
77
82
74
50
45
50
42
127
136
133
140
165
174
173
180
500
82
77
82
74
50
45
50
42
113
123
124
135
206
216
211
223
500
82
77
82
74
50
45
50
42
89
109
95
114
184
204
181
200
500
83
78
83
75
51
46
51
43
115
125
113
125
160
171
177
192
500
83
78
85
77
51
46
53
45
Useful pump head
low-head
cooling mode
(kPa)
Useful pump head
high-head
cooling mode
(kPa)
(l)
Sound power
db(A)
 Sound pressure
db(A)
Cooling
leaving water temperature 7 °C;
external air temperature 35 °C;
∆t = 5 °C.
-
Sound power
Aermec determines sound power values in accordance with ISO
9614-2 as required for Eurovent certification.
Heating
leaving water temperature 45 °C;
external air temperature 7 °C B.S. 6 °C B.U.;
∆t = 5 °C.
 Sound pressure
Sound pressure measured in free field conditions, in cooling mode, at
distance of 10m and directivity factor = 2. In accordance with ISO 3744
Dimensions (mm)
NRL 500-700
NRL 280-350
A
A
C
C
B
B
Mod. NRL
Height A
Width B
U.M.
(mm)
(mm)
Length C
(mm)
Weight empty
kg
Vers.
All
All
H - HL
HA - HE
H - HL
HA - HE
280
1606
1100
2450
2450
713
730
300
1606
1100
2450
2950
724
795
330
1606
1100
2450
2950
731
805
350
1606
1100
2450
2950
740
811
500
1875
1100
2950
2950
913
1099
550
1875
1100
2950
2950
917
1103
600
1875
1100
2950
2950
1016
1204
650
1875
1100
2950
2950
1130
1212
700
1875
1100
2950
3950
1142
1390
Note:
Sizes 280,300,330,350 are only available in versions HL - HE.
146
147
Cod.: SNRLHUY.05 / 1212
Technical Data
NRL
Mod. NRL
AER485
DUALCHILLER
MULTICHILLER
PGS
AERWEB300
TRX1
AVX
VT
R410A
DCPX
DCPX “M” vers.
con ventilatori maggiorati
Aermec
participate in the EUROVENT program:
LCP/A/P/C.
DRE
GP
RIF
PRM1/PRM2
Vers.
Tutte
Tutte
Tutte
Tutte
Tutte
Tutte
Tutte
Tutte
°
L
A
E
°
L
A
E
standard
°-L
A-E
°-L
A-E
standard
750
✔
✔
✔
✔
✔
✔
23
64
standard
64
standard
65
standard
65
standard
751
10 (x3)
10 (x3)
53
53
✔
800
✔
✔
✔
✔
✔
✔
✔
64
standard
66
standard
65
standard
66
standard
801
10 (x3)
260
87
88
✔
900
✔
✔
✔
✔
✔
✔
✔
64
di standard
66
di standard
65
di standard
66
di standard
901
10 (x3)
260
89
90
✔
1000
✔
✔
✔
✔
✔
✔
✔
65
standard
66
standard
65
standard
66
standard
1001
10 (x4)
260
91
92
✔
1250
✔
✔
✔
✔
✔
✔
✔
65
standard
67
standard
65
standard
68
standard
1251
10 (x4)
350
91
92
✔
1400
✔
✔
✔
✔
✔
✔
✔
66
standard
67
standard
66
standard
68
standard
1401
350
350
93
93
✔
1500
✔
✔
✔
✔
✔
✔
✔
66
standard
67
standard
66
standard
68
standard
1501
350
350
94
94
✔
1650
✔
✔
✔
✔
✔
✔
✔
67
standard
68
standard
68
standard
68
standard
1651
350
500
94
94
✔
1800
✔
✔
✔
✔
✔
✔
✔
67
standard
68
standard
68
standard
68
standard
1801
350
500
94
94
✔
NOTE: For the selection of AVX refer to the technical manual
Unit Configurator
• High efficiency version
• LOW noise high efficiency version
• COMPACT version
• LOW NOISE COMPACT version
- pump ASSEMBLY and tank
OPTION
Characteristics
• Heat exchangers optimised to benefit from
the excellent heat transfer characteristics of
R410A
-Maximum leaving water temperature 18 °C
°
Compact cooling only
L
Compact low noise cooling only
A
High efficiency cooling only
only
C
Condensing unit
(X)electronic expansion valve, also for low liquid temperature (down to -6 °C)
-“°”Standard
-“J” Inverter
• Pump assembly and buffer tank options complete with water filter, flow switch, expansion
tank, charging point, and anti-freeze electric
heater
pumps based on operating hours (manual
rotation sizes 1400 to 1800)
- Low and high pressure transducers (standard
for all units)
- Alarm history
Accessori
• AER485: RS-485 interface for supervision sys- • RIF: Power factor correction. Connected in
tems with MODBUS protocol.
• AVX: spring anti-vibration mounts Select the
AVX model from the compatibility table.
at time of order and is available factory fitted
• DCPX: Low ambient device for cooling operonly.
ation below 10 °C down to -10 °C. Pressure •AERWEB300: Accessory AERWEB allows
remote control of a chiller through a comthe electronic controller varies fan speed to
operation.
remote control max. 6 units in RS485 net30% for single circuit units, 26% for two cirwork;
cuit units, 22% for three circuit units). Only
remote control max. 18 units in RS485 netFactory fitted only.
work;
remote control max. 6 units in RS485 net• PGS: Daily/Weekly Programmer. Allows two
remote control max. 18 units in RS485 netday of the week.
148
capability.
• VT: anti-vibration mounts, to be fitted below
the unit base.
• PRM1 and PRM2: FACTORY FITTED
ACCESSORY. A manual reset pressure switch
wired in series with the existing high pressure
switch installed on the compressor discharge
line.
requirements.
1 2 3
456
7
8
9
10
11
12
13
14
15 16
|||||||||| |
Fan
|
Integrated
|||||
hydronic
Size
Expansion valve
Heat recovery
Coil
Power supply
module
Code:
NRL
Size:
075, 080, 090, 100, 125, 140, 150, 165, 180
Compressors:
Expansion valve:
down to +4 °C
Y - Thermostatic expansion valve for low liquid temperature down to -6 °C
Model:
° - Cooling only
C - Condensing unit
Heat recovery
T - With total heat recovery (not available with buffer tank)
Version:
° - Compact
A - High efficiency
Coil:
° - Aluminium
R - Copper
S - Tinned copper
Fan:
° - Standard
M - High static pressure
J - Inverter
Power supply:
° - 400V 3~ 50Hz with circuit breakers
versions with DCPX)
05-single low head pump and buffer tank (with holes for immersion
heaters)
Attention:
aluminium condenser coils, standard fans, and electrical panel for compressor motors 400V 3~ 50Hz, without pump or buffer tank.
149
Technical Data
U.M.
Cooling capacity
(kW)
Total power input
(kW)
Water flow rate
(l/h)
Pressure drop
(kPa)
EER
(W/W)
ESEER
(W/W)
Vers.
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
750
190
174
195
180
69
75
62
68
32680
29930
33540
30960
86
72
88
75
2,75
2,32
3,15
2,65
3,87
3,85
4,19
4,05
800
211
190
218
203
78
88
69
76
36290
32680
37500
34920
66
55
66
58
2,71
2,16
3,16
2,67
4,19
4,10
4,39
4,27
900
231
210
242
224
92
101
81
88
39730
36120
41620
38530
68
57
70
61
2,51
2,08
2,99
2,55
3,97
3,95
4,27
4,20
°
L
A
E
°-L
A-E
°-L
A-E
All
°-L
A-E
All
°
L
A
E
°-L
A-E
All
All
All
122
113
113
109
144
144
320
320
142
153
136
145
170
173
345
348
166
177
158
169
192
195
401
404
4/2
4/2
4/2
4/2
4/2
4/2
51400
42700
49000
35300
3
3
54900
38430
72800
50960
3
4
54150
40575
71500
51805
3
4
Power supply
Total input current
(A)
(A)
(A)
Type of compressors
Type of fans
Fan air flow rate
(m3/h)
Number of fans
(n°)
Evaporator
Hydraulic connections (Ø)
Input power
low-head pump
Input power
high-head pump
Input current
low-head pump
Input current
high-head pump
4”
4”
1400
338
302
357
329
142
157
124
134
58140
51940
61400
56590
73
59
78
67
2,38
1,92
2,88
2,46
3,76
3,65
4,12
4,05
1500
375
336
399
367
161
177
142
154
64500
57790
68630
63120
79
64
61
52
2,33
1,90
2,81
2,38
3,68
3,61
4,02
3,93
1650
412
366
437
409
175
192
154
165
70860
62950
75160
70350
59
48
61
54
2,35
1,91
2,84
2,48
3,72
3,62
4,06
4,02
1800
449
393
469
436
187
208
167
179
77230
67600
80670
74990
59
46
62
54
2,40
1,89
2,81
2,44
3,79
3,59
4,02
4,02
249
269
235
251
290
296
499
505
286
308
273
292
319
325
528
534
305
328
289
306
358
365
626
633
319
348
304
324
391
398
659
666
Maximum current
(FLA)
(A)
(A)
5/2
5/2
6/2
6/2
6/2
6/2
6/2
6/2
Input current
(A)
77000
57700
104100
75420
4
6
76000
60800
102000
76500
4
6
108300
75810
125800
91110
6
8
106200
74340
122000
91500
6
8
Sound power
db(A)
 Sound pressure
db(A)
4”
4”
4”
4”
(kW)
All
3,0
3,4
3,4
3,4
4,6
4,6
5,9
5,9
5,9
(kW)
All
5,5
5,7
5,7
5,7
8,3
8,3
8,3
10,5
10,5
(A)
All
6,2
5,8
5,8
5,8
7,8
7,8
10,0
10,0
10,0
(A)
All
11,0
9,7
9,7
9,7
14,1
14,1
14,1
17,8
17,8
°
L
A
E
°
L
A
E
All
81
92
71
82
201
212
191
202
700
100
120
109
122
219
241
227
237
700
92
112
95
111
211
232
213
226
700
91
111
85
104
208
229
200
216
700
111
139
103
125
256
286
247
264
700
102
133
82
108
246
279
222
246
700
88
116
106
125
220
258
226
250
700
109
134
94
111
246
271
233
245
700
99
130
82
102
237
267
221
236
700
Useful pump head
low-head
(kPa)
Useful pump head
high-head
(kPa)
(l)
(*) The power supply for size 750 is: 400V-3N-50Hz.
-
2"1/2
1000
1250
257
303
235
271
271
322
250
298
104
121
113
134
93
106
101
115
44200
52120
40420
46610
46610
55380
43000
51260
73
80
61
65
70
73
61
63
2,47
2,50
2,08
2,02
2,91
3,04
2,48
2,59
3,98
3,96
3,95
3,84
4,17
4,34
4,08
4,28
400V-3-50Hz (*)
189
208
200
226
180
196
192
211
217
261
217
267
426
529
426
535
Scroll
4/2
4/2
4/2
4/2
Axial
75800
73200
53060
51240
70200
106200
52650
74340
4
4
4
6
Plate
Victaulic
4”
4”
Cooling:
∆t = 5 K.
Mod. NRL
Sound power
 Sound pressure
dB(A)
dB(A)
Vers.
°
L
A
E
°
L
A
E
750
85,0
80,0
85,0
77,0
53,0
48,0
53,0
45,0
800
86,0
83,0
88,0
83,0
54,0
51,0
56,0
51,0
900
86,0
83,0
88,0
83,0
54,0
51,0
56,0
51,0
Sound power:
1000
90,0
87,0
88,0
83,0
58,0
55,0
56,0
51,0
1250
91,0
88,0
91,0
86,0
59,0
56,0
59,0
54,0
1400
90,5
87,5
90,5
85,5
58,5
55,5
58,5
53,5
1500
90,5
87,5
90,5
85,0
58,5
55,5
58,5
53,0
1650
92,0
89,0
91,5
86,5
60,0
57,0
59,5
54,5
1800
92,0
89,0
93,5
88,5
60,0
57,0
61,5
56,5
e Sound pressure measured in free field conditions at distance of 10m
and directivity factor = 2. In accordance with ISO 3744.
Technical Data " C Version "
Mod. NRL C
Cooling capacity
(kW)
Total power input
(kW)
EER
(W/W)
Vers.
°
L
A
E
°
L
A
E
°
L
A
E
°-L
A-E
°-L
A-E
°
L
A
E
°
L
A
E
°
L
A
E
750
196
179
201
185
70
76
62
69
2,8
2,37
3,22
2,7
144
144
320
320
123
134
110
121
85
80
85
77
53
48
53
45
800
220
198
227
211
81
91
71
78
2,71
2,19
3,19
2,71
170
173
345
348
147
158
140
149
86
83
88
83
54
51
56
51
900
241
219
252
233
95
105
83
91
2,53
2,09
3,03
2,57
192
195
401
404
172
183
163
173
86
83
88
83
54
51
56
51
1000
269
245
282
260
108
117
95
103
2,48
2,09
2,97
2,52
217
217
426
426
196
207
185
197
90
87
88
83
58
55
56
51
1250
316
283
335
311
125
139
109
118
2,52
2,03
3,08
2,64
261
267
529
535
215
234
202
216
91
88
91
86
59
56
59
54
1400
352
315
372
343
147
163
127
138
2,39
1,94
2,92
2,48
290
296
499
505
258
279
241
258
90,5
87,5
90,5
85,5
58,5
55,5
58,5
53,5
1500
391
351
415
382
166
183
145
158
2,35
1,91
2,86
2,42
319
325
528
534
297
319
281
299
90,5
87,5
90,5
85
58,5
55,5
58,5
53
1650
430
383
463
426
182
199
152
169
2,37
1,92
3,05
2,52
358
365
626
633
316
340
289
315
92
89
91,5
86,5
60
57
59,5
54,5
1800
469
410
497
454
194
216
165
184
2,42
1,9
3,02
2,47
391
398
659
666
331
361
302
333
92
89
93,5
88,5
60
57
61,5
56,5
1650
2450
2450
2200
2200
4250
5750
3055
3065
3620
3635
1800
2450
2450
2200
2200
4250
5750
3160
3170
3735
3750
Dimensions (mm)
C
C
B
B
A
A
Mod. NRL
Height
(mm) C
Width
(mm) A
Length
(mm) B
Weight empty
150
U.M.
(kg)
Vers.
°-L
A-E
°-L
A-E
°-L
A-E
°
L
A
E
750
1975
1975
1500
1500
4350
4350
1382
1382
1663
1663
800
1975
2450
1500
2200
4355
3400
1730
1740
2120
2135
900
1975
2450
1500
2200
4355
3400
1860
1870
2265
2280
1000
1975
2450
1500
2200
5355
3400
2015
2025
2410
2425
1250
1975
2450
1500
2200
5355
4250
2135
2145
2710
2725
1400
2450
2450
2200
2200
4250
4250
2765
2775
2910
2925
1500
2450
2450
2200
2200
4250
4250
2960
2970
3125
3140
151
Code: SNRLLSUY.05 /0212
Mod. NRL
Accessory Compatibility
NRL
Mod. NRL
AER485
DUALCHILLER
MULTICHILLER
PGS
AERWEB300
TRX1
AVX
Air cooled heat pumps with axial fans
Capacity from 165 to 523 kW
R410A
VT
DCPX
DCPX vers. with fans "J"
DRE
GP
Aermec adheres to the EUROVENT
Certification programme up to 600kW
cooling. The products concerned appear
in the EUROVENT Certified products
guide.
RIF
PRM1/PRM2
Vers.
750
All
✔
All
✔
All
✔
All
✔
All
✔
All
✔
All
All
23
H
64
HL
standard
HA
65
HE
standard
All
All
751
H - HL
10 (x3)
HA - HE
10 (x3)
H -HL
53
HA -HE
53
All
✔
800
✔
✔
✔
✔
✔
✔
✔
65
standard
66
standard
801
10 (x3)
260
87
88
✔
900
1000
1250
1400
1500
1650
1800
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
65
65
65
66
66
68
68
standard
standard
standard
standard
standard
standard
standard
66
66
68
68
68
68
68
standard
standard
standard
standard
standard
standard
standard
NOTE: DCPX not necessary. The fans are already fitted with speed controller.
901
1001
1251
1401
1501
1651
1801
10 (x3)
10 (x4)
10 (x4)
350
350
350
350
260
260
350
350
350
500
500
89
91
91
93
94
94
94
90
92
92
93
94
94
94
✔
✔
✔
✔
✔
✔
✔
NOTE: For the selection of AVX refer to the technical manual
Unit Configurator
• High efficiency version • LOW NOISE high efficiency version • COMPACT version
- PUMP ASSEMBLY OPTION
- PUMP ASSEMBLY AND BUFFER
tank OPTION
Characteristics
R410A
- Maximum external air temperature 30° C
DCPX)
- “X” electronic expansion valve, also for low
fluid temperature (down to -6 °C)
- “°” Standard
- “J” Inverter
heater
- Control from the entering water tempera-
ture, with the possibility of selecting control
of the leaving water temperature.
pumps based on operating hours (manual
rotation sizes 1400 to 1800)
for all units)
- Alarm history
Accessories
• AER485: RS-485 interface for supervision sysoff cycles) and different programmes for each
tems with MODBUS protocol.
day of the week.
• AVX: spring anti-vibration mounts Select the • RIF: Power factor correction. Connected in
• DCPX: Low ambient device for cooling operreduction of input current. Must be requested
ation below 10 °C down to -10 °C. Pressure
only.
the electronic controller varies fan speed to •AERWEB300: Accessory AERWEB allows
remote control of a chiller through a comoperation. Also permits correct unit operation
in heating mode with external air temperacommon browser; 4 versions available:
tures above 30 °C and up to 42 °C.
remote control max. 6 units in RS485 net30% for single circuit units, 26% for two cirwork;
remote control max. 18 units in RS485 netFactory fitted only.
work;
remote control max. 6 units in RS485 net• PGS: Daily/Weekly Programmer. Allows two
152
remote control max. 18 units in RS485 network with integrated GPRS modem;
capability.
• VT: anti-vibration mounts, to be fitted below
the unit base.
line.
requirements.
1 2 3
456
7
8
9
10
11
12
13
14
15 16
|||||||||| |
Fan
|
Integrated
|||||
hydronic
Size
Expansion valve
Heat recovery
Coil
Power supply
module
Code:
NRL
Power supply:
Size:
075, 080, 090, 100, 125, 140, 150, 165, 180
Compressors:
versions with DCPX)
Expansion valve:
down to +4 °C
Model:
05- single low head pump and buffer tank (with holes for immersion H - Heat pump
heaters)
Heat recovery
07- single high head pump and buffer tank (with holes for immersion
heaters)
Version:
A - High efficiency
Coil:
° - Aluminium
R - Copper
S - Tinned copper
Fan:
° - Standard
J - Inverter
Attention:
Example of configuration code: NRL1000°H°E°°°04
This is an NRL unit of size 1000, with standard thermostatic expansion valve, heat pump model, without heat recovery, high efficiency, with
aluminium condenser coils, standard fans, and electrical panel for compressor motors 400V 3~ 50Hz, and single and standby high head pump and
buffer tank.
153
Technical data
Cooling capacity
Total power input
(kW)
(kW)
(l/h)
Water flow rate
Pressure drop
(kPa)
EER
(W/W)
ESEER
(W/W)
Heating capacity
(kW)
Total power input
(kW)
Water flow rate
(l/h)
Pressure drop
(kPa)
COP
(W/W)
Power supply
Total input current
(A)
(A)
(A)
Type of compressors
Type of fans
(n°)
Fan air flow rate
(m3/h)
Number of fans
(n°)
Evaporator
Type of hydraulic connection
Input power
low-head pump
Input power
high-head pump
Input current
low-head pump
Input current
high-head pump
(Ø)
Vers.
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H - HL
HA - HE
H - HL
HA - HE
H - HL
HA - HE
H - HL
HA - HE
H - HL
HA - HE
All
H - HL
HA - HE
H - HL
HA - HE
H - HL
HA - HE
All
All
All
H
HL
HA
HE
H
HL
HA
HE
All
All
H - HL
HA - HE
750
176
165
180
175
70
77
63
69
30270
28380
30960
30100
74
65
64
60
2,51
2,13
2,85
2,54
3,87
3,85
4,19
4,05
201
204
65
61
34570
35090
96
82
3,08
3,33
800
201
184
211
194
81
90
73
81
34570
31650
36290
33370
46
39
55
47
2,48
2,04
2,89
2,4
3,98
3,9
4,17
4,06
227
233
75
74
39040
40080
61
68
3,03
3,15
900
222
200
239
213
94
105
82
94
38180
34400
41110
36640
45
37
56
45
2,36
1,9
2,91
2,27
3,77
3,75
4,06
3,99
256
263
85
83
44030
45240
62
69
3,01
3,17
113
109
144
144
320
320
136
138
173
177
348
352
156
157
195
199
404
408
4/2
4/2
4/2
50200
41700
48000
34600
3
3
3
3
64500
45200
85600
59920
3
3
4
4
63750
44600
84600
59220
3
3
4
4
3”
3”
3"
3"
3"
3"
1000
1250
1400
262
300
333
237
265
302
261
315
351
231
284
319
101
120
140
112
136
154
94
109
126
107
122
140
45060
51600
57280
40760
45580
51940
44890
54180
60370
39730
48850
54870
50
57
40
41
45
33
54
61
48
43
51
40
2,59
2,5
2,38
2,12
1,95
1,96
2,78
2,89
2,79
2,16
2,33
2,28
3,78
3,76
3,57
3,75
3,65
3,47
3,96
4,13
3,91
3,88
4,06
3,85
293
340
384
293
344
388
96
111
126
93
110
124
50400
58480
66050
50400
59170
66740
65
78
54
69
76
58
3,05
3,06
3,05
3,15
3,13
3,13
400V-3-50Hz (*)
179
193
227
177
197
231
221
265
294
221
274
303
430
533
503
430
542
512
Scroll
4/2
4/2
5/2
Axial
85600
80800
87400
59900
56600
65500
83600
126000 124200
60610
88200
90000
4
4
4
4
4
4
4
6
6
4
6
6
Plates
Victaulic
3"
3"
4"
3"
4"
4"
1500
367
332
388
355
159
174
143
158
63120
57100
66740
61060
40
34
49
41
2,31
1,91
2,71
2,25
3,5
3,43
3,82
3,74
427
433
141
139
73440
74480
55
60
3,03
3,12
1650
423
373
437
398
166
187
151
168
72760
64160
75160
68460
47
37
54
45
2,55
1,99
2,89
2,37
3,53
3,44
3,85
3,81
468
484
155
153
80500
83250
59
66
3,02
3,16
1800
454
397
472
426
179
204
162
182
78090
68280
81180
73270
46
36
54
44
2,54
1,95
2,91
2,34
3,6
3,41
3,82
3,82
503
523
166
163
86520
89960
58
66
3,03
3,21
261
265
323
332
532
541
279
282
365
373
633
641
290
293
398
406
666
674
6/2
6/2
86800
69400
122400
91800
4
4
6
6
-
All
5,5
5,7
5,7
5,7
8,3
8,3
8,3
10,5
10,5
(A)
All
6,2
5,8
5,8
5,8
7,8
7,8
10
10
10
(A)
All
11
9,7
9,7
9,7
14,1
14,1
14,1
17,8
17,8
H
HL
HA
HE
H
HL
HA
HE
All
97
109
104
110
211
235
224
231
700
125
138
123
135
243
257
240
252
700
120
135
114
132
237
253
230
249
700
118
134
111
131
233
250
225
247
700
142
165
128
150
285
309
269
293
700
149
167
128
149
290
310
266
289
700
142
157
125
141
274
297
246
272
700
122
145
106
126
257
280
241
261
700
115
141
95
119
251
276
232
255
700
1400
1500
1650
1800
93,5
90,5
91,5
86,0
61,5
58,5
59,5
54,0
91,0
88,0
91,0
85,5
59,0
56,0
59,0
53,5
90,5
87,5
91,5
85,0
58,5
55,5
58,5
53,0
92,0
89,0
92,0
86,5
60,0
57,0
60,0
54,5
94,0
91,0
94,0
88,5
62,0
59,0
62,0
56,5
-
Heating
∆t = 5 °C.
e Sound pressure measured in free field conditions, in cooling mode, at
distance of 10m and directivity factor = 2. In accordance with the
ISO 3744.
B
Mod. NRL
Weight empty
B
A
A
U.M.
4"
4"
(kW)
1250
90,5
87,5
88,5
83,5
58,5
55,5
56,5
51,0
C
4"
4"
5,9
1000
88,5
85,5
88,5
83,0
56,5
53,5
56,5
51,0
C
4"
4"
5,9
900
88,5
85,5
88,5
83,0
56,5
53,5
56,5
51,0
Dimensions (mm)
(mm) B
5,9
800
85,0
80,0
85,0
77,0
53,0
48,0
53,0
45,0
Power supply voltage: 400 V
Depth
4,6
750
H
HL
HA
HE
H
HL
HA
HE
e Sound power:
122400
85700
165600
115920
6
6
8
8
4,6
Vers.
Cooling
∆t = 5 °C.
124200
86900
168000
117600
6
6
8
8
3,4
(l)
db(A)
(mm) A
3,4
 Sound pressure
Width
3,4
(kPa)
db(A)
6/2
3,0
Useful pump head
high-head
cooling mode
 Sound power
(mm) C
All
(kPa)
U.M.
Height
(kW)
Useful pump head
low-head
cooling mode
Mod. NRL
(kg)
Vers.
750
800
900
1000
1250
1400
1500
1650
1800
H - HL
HA - HE
H - HL
HA -HE
H - HL
HA - HE
H
HL
HA
HE
1975
1975
1500
1500
4350
4350
1487
1487
1748
1748
1975
2450
1500
2200
4355
3400
1800
1800
2150
2160
1975
2450
1500
2200
4355
3400
1940
1950
2300
2310
1975
2450
1500
2200
5355
3400
2170
2180
2460
2470
1975
2450
1500
2200
5355
4250
2320
2320
2750
2760
2450
2450
2200
2200
4250
4250
2930
2940
2990
3000
2450
2450
2200
2200
4250
4250
3140
3150
3190
3200
2450
2450
2200
2200
4250
5750
3220
3230
3680
3690
2450
2450
2200
2200
4250
5750
3330
3340
3800
3810
Warning: the weights refer to versions without pump or buffer tank.
Cod.: SNRLLSHUY.08 / 1201
Mod. NRL
(*) For size 075 has the power: 400V-3N-50Hz.
154
155
NRL
Mod. NRL
AER485P1
PGS
TRX1
Air cooled chiller with axial fans
DCPX
R410A
DCPX “M” with high
static pressure fans
GP
RIF
PRM1/PRM2
AVX (00)
Aermec
program:LCP/A/P/C, up to 600 kW
* Not certified model
AVX (01-02-03-04)
AVX (P1-P2-P3-P4)
Vers.
All
All
All
°
L
A
E
°
L
A
E
°-L
A-E
°-L
A-E
All
°-L
A-E
°-L
A-E
°-L
A-E
2000
✔
✔
✔
standard
78
standard
standard
78
standard
260 x 2
RIFNRL2000
✔
767
768
769
2250
✔
✔
✔
standard
79
standard
standard
80
standard
260 350
RIFNRL2250
✔
773
774
775
2500
✔
✔
✔
standard
81
standard
standard
82
standard
350 x 2
RIFNRL2500
✔
779
780
781
2800
✔
✔
✔
78
standard
81
standard
78
standard
82
standard
350 x 2
350 x 2
RIFNRL2800
RIFNRL2800
✔
785
785
786
786
787
787
3000
✔
✔
✔
78
standard
81
standard
78
standard
82
standard
350 x 2
350 x 2
RIFNRL3000
RIFNRL3000
✔
791
791
792
792
793
793
3300
3600
✔
✔
✔
✔
✔
✔
81
81
standard
standard
82
82
standard
standard
82
82
standard
standard
82
82
standard
standard
350 x 2
350 x 2
500 x 2
500 x 2
RIFNRL3300 RIFNRL3600
RIFNRL3300 RIFNRL3600
✔
✔
791
791
798
798
792
792
799
799
793
793
800
800
Unit Configurator
requirements.
• LOW NOISE high efficiency version
• COMPACT version
- PUMP ASSEMBLY OPTION
- pump ASSEMBLY AND BUFFER
tank OPTION
1 2 3
456
7
8
9
10
11
12
13
14
15-16
|||||||||| |
Fan
|
Integrated
|||||
hydronic
Size
Expansion valve
Heat recovery
Coil
Power supply
module
Characteristics
R410A
-Maximum leaving water temperature 18 °C
°
Compact cooling only
L
Compact low noise cooling only
A
High efficiency cooling only
only
C
Condensing unit
(X)electronic expansion valve
-“°”Standard
-“J” Inverter
heater
pumps based on operating hours (for all
sizes)
for all units)
- Alarm history
Accessories
• AER485P1: RS-485 interface for supervision • GP: Protection grille protects the external coil • TRX1: Metal cap that replaces the plastic cap,
mounted as shipping protection, for immer• AVX: spring anti-vibration mounts Select the • PGS: Daily/Weekly Programmer. Allows two
sion heater holes in the buffer tank.
daily time-clock programmes (two switch on/ • PRM1-PRM2: FACTORY FITTED ACCESSORY.
• DCPX: Low ambient device for cooling operoff cycles) and different programmes for each
A manual reset pressure switch wired in
ation below 10 °C down to -10 °C. Pressure
day of the week.
series with the existing high pressure switch
transducers read the condensing pressure and • RIF: Power factor correction. Connected in
only.
30 ° C and up to 42 ° C.
156
Code:
NRL
Size:
200, 225, 250, 280, 300, 330, 360
Compressors:
0 - Compressori standard ad R410A
Expansion valve:
down to +4 °C
Y-Thermostatic expansion valve for low liquid temperature down to -6 °C
Model:
° - Cooling only
C - Condensing unit
Heat recovery
Version:
° - Compact
A - High efficiency
Coil:
° - Aluminium
R - Copper
S - Tinned copper
Fan:
° - Standard
J - Inverter
Power supply:
versions with DCPX)
05 - single low head pump and buffer tank (with holes for immersion heaters)
07 - single high head pump and buffer tank (with holes for immersion heaters)
Attention:
aluminium condenser coils, standard fans, and electrical panel for compressor motors 400V 3~ 50Hz, without pump or buffer tank.
157
Technical Data
Technical Data
U.M.
Cooling capacity
(kW)
Total power input
(kW)
Water flow rate
(l/h)
Pressure drops
(kPa)
EER
(W/W)
ESEER
(W/W)
Supply
Type of fan
(A)
Total air flow rate
(m3/h)
Operating current
(A)
(A)
(A)
Type of compressors
(n.)
Evaporator
Type of plumbing connections
Number of hydraulic connections
(Ø)
(l)
Input power
low-head pump
Input power
high-head pump
Input current
low-head pump
Input current
high-head pump
(kW)
(kW)
(A)
(A)
Useful pump head
low-head
(kPa)
Useful pump head
high-head
(kPa)
Sound power
(dBA)
e Sound pressure
(dBA)
Vers.
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
All
2000
542
500
186
202
93220
86000
70,4
60,7
2,91
2,48
4,17
4,08
2250
593
548
199
216
102000
94260
72,6
63,0
2,98
2,54
4,25
4,18
*2500
*644
596
212
230
110770
102510
72,6
63,0
3,04
2,59
4,34
4,28
°
L
A
E
°
L
A
E
°-L
A-E
°-L
A-E
140400
105300
361
384
434
643
8/4
176400
126990
377
403
484
752
8/4
212400
148680
393
421
534
802
8/4
2
4”
2
3”/4”
2
4”
7,4
15,4
13,0
12,4
22,0
85
104
200
216
91
86,0
59
54
3,7+4,8
7,7+4,8
6,5+8,6
6,2+8,1
11+14,6
103
118
227
245
93
88
61
56
9,6
9,6
17,2
16,2
29,2
103
125
247
264
94
89,0
62
57
°-L
A-E
All
2
°-L
A-E
All
°
L
A
E
°/L
A/E
°/L
A/E
°/L
A/E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
Cooling:
- leaving water temperature 7 °C;
- ∆t = 5 °C.
158
*2800
676
604
714
658
284
314
248
268
116270
103890
122810
113180
73,0
59,1
77,8
66,9
2,38
1,92
2,88
2,46
3,76
3,65
4,12
4,05
400V-3-50Hz
Axial
154000
115400
208200
150840
498
538
470
502
580
592
789
801
Scroll
10/4
10/4
Plate
Victaulic
2
4”
4”
2 x 700
9,6
9,6
9,6
9,6
17,2
17,2
16,3
16,3
29,2
29,2
102
133
82
108
246
279
222
246
93,5
90,5
93,5
88,5
61,5
58,5
61,5
56,5
*3000
750
672
798
734
322
354
284
308
129000
115580
137260
126250
78,6
63,8
60,8
52,1
2,33
1,90
2,81
2,38
3,68
3,61
4,02
3,93
*3300
824
733
874
818
350
384
308
330
141730
125900
150330
140700
59,5
47,9
60,8
53,7
2,35
1,90
2,84
2,48
3,72
3,62
4,06
4,02
*3600
898
786
938
872
374
416
334
358
154460
135190
161340
149980
58,8
45,9
61,7
53,9
2,40
1,89
2,81
2,44
3,79
3,59
4,02
4,02
152000
121600
204000
153000
572
616
547
583
638
650
847
859
216600
151620
266000
192300
610
656
563
613
716
729
984
997
212400
148680
244000
183000
638
696
589
649
782
795
1050
1063
12/4
12/4
12/4
12/4
12/4
12/4
2
4”
4”
2
4”
4”
4”
4”
9,6
9,6
9,6
9,6
17,2
17,2
16,3
16,3
29,2
29,2
88
116
106
125
220
258
226
250
93,5
90,5
93,5
88,0
61,5
58,5
61,5
56
13,0
9,6
9,6
9,6
24,7
17,2
22,0
22,0
42,4
42,4
109
134
94
111
246
271
233
245
95,0
92,0
94,5
89,5
63,0
60,0
62,5
57,5
13,0
9,6
9,6
9,6
24,7
17,2
22,0
22,0
42,4
42,4
99
130
82
102
237
267
221
236
95,0
92,0
96,5
91,5
63,0
60,0
64,5
59,5
Mod. NRL
U.M.
Cooling capacity
(kW)
Total power input
(kW)
EER
Vers.
°
L
A
E
°
L
A
E
°
L
A
E
°-L
A-E
°-L
A-E
°
L
A
E
°
L
A
E
°
L
A
E
(W/W)
(A)
(A)
Input current
(A)
Sound power
(dBA)
e Sound pressure
(dBA)
*2000
564
520
190
206
2,97
2,52
434
643
370
394
91
86,0
59
54
*2250
617
571
204
221
3,02
2,58
484
752
387
413
93
88
61
56
*2500
670
622
218
236
3,07
2,64
534
802
404
432
94
89,0
62
57
*2800
704
630
744
686
284
314
254
276
2,39
1,93
2,93
2,49
580
592
789
801
516
558
482
516
93,5
90,5
93,5
88,5
61,5
58,5
61,5
56,5
*3000
782
702
830
764
322
354
290
316
2,36
1,92
2,86
2,42
638
650
847
859
594
638
562
598
93,5
90,5
93,5
88,0
61,5
58,5
61,5
56
*3300
860
766
926
852
350
384
304
338
2,36
1,92
3,05
2,52
716
729
984
997
632
680
578
630
95,0
92,0
94,5
89,5
63
60
62,5
57,5
*3600
938
820
994
908
374
416
330
368
2,42
1,90
3,01
2,47
782
795
1050
1063
662
722
604
666
95,0
92,0
96,5
91,5
63
60
64,5
59,5
Cooling:
- ∆t = 5 °C.
Dimensions (mm)
C
B
A
Mod. NRL
U.M.
Height
C
(mm)
Width
A
(mm)
Length
B
(mm)
Weight empty
(Kg)
Vers.
°-L
A-E
°-L
A-E
°-L
A-E
°-L
A-E
2000
2450
2250
2450
2500
2450
2200
6400
4820
2200
7250
5240
2200
8100
5660
2800
2450
2450
2200
2200
8100
8100
5630
6060
3000
2450
2450
2200
2200
8100
8100
6020
6510
3300
2450
2450
2200
2200
8100
11100
6220
7590
3600
2450
2450
2200
2200
8100
11100
6420
7850
Cod.: SNRLMSUY.03 / 1102
Mod. NRL
159
NRL
Mod. NRL
AER485P1
PGS
TRX1
Air cooled heat pumps with axial fans
Capacity from 462 to 944 kW
DCPX
R410A
GP
RIF
PRM1/PRM2
AVX (00)
AVX (01-02-03-04)
AVX (P1-P2-P3-P4)
Aermec
program:LCP/A/P/C, up to 600 kW
Vers.
All
All
All
H
HL
HA
HE
H - HL
HA - HE
H - HL
HA - HE
All
H - HL
HA -HE
H-HL
HA - HE
H - HL
HA - HE
2000
4
4
4
standard
78
standard
260 x 2
RIFNRL2000
4
767
768
769
2250
4
4
4
standard
80
standard
260 350
RIFNRL2250
4
773
774
775
2500
4
4
4
standard
82
standard
350 x 2
RIFNRL2500
4
779
780
781
2800
4
4
4
78
standard
82
standard
350 x 2
350 x 2
RIFNRL2800
RIFNRL2800
4
785
785
786
786
787
787
3000
4
4
4
78
standard
82
standard
350 x 2
350 x 2
RIFNRL3000
RIFNRL3000
4
791
791
792
792
793
793
3300
4
4
4
82
standard
82
standard
350 x 2
500 x 2
RIFNRL3300
RIFNRL3300
4
791
798
792
799
793
800
3600
4
4
4
82
standard
82
standard
350 x 2
500 x 2
RIFNRL3600
RIFNRL3600
4
791
798
792
799
793
800
Unit Configurator
requirements.
• High efficiency version • LOW NOISE high efficiency version
• COMPACT version
• LOW NOISE COMPACT version - 4 REFRIGERANT circuits
- pump ASSEMBLY AND BUFFER
tank OPTION
Caratteristiche
R410A
-M
aximum external air temperature 30° C
DCPX)
- “X” electronic expansion valve
- “°” Standard
- “J” Inverter
• Pump assembly and buffer tank options complete
with water filter, flow switch, expansion tank,
charging point, and anti-freeze electric heater
of the leaving water temperature.
pumps based on operating hours (for all
sizes)
for all units)
- Alarm history
Accessories
• AER485P1: RS-485 interface for supervision
• DCPX: Low ambient device for cooling operation
below 10 °C down to -10 °C. Pressure transducers
read the condensing pressure and the electronic
controller varies fan speed to maintain adequate
pressure for correct unit operation. It also allows a
correct operation by heating with external temperatures above 30 ° C and up to 42 ° C.
160
mounted as shipping protection, for immerfrom accidental damage.
sion heater holes in the buffer tank.
• PGS: Daily/Weekly Programmer. Allows two • PRM1-PRM2: FACTORY FITTED ACCESSORY.
A manual reset pressure switch wired in
series with the existing high pressure switch
day of the week.
• RIF: Power factor correction. Connected in parallel to the motor allowing about 10% reduction
of input current. Must be requested at time of
order and is available factory fitted only.
1 2 3
456
7
8
9
10
11
12
13
14
15-16
|||||||||| |
Fan
|
Integrated
|||||
hydronic
Size
Expansion valve
Heat recovery
Coil
Power supply
module
Code:
NRL
Size:
200, 225, 250, 280, 300, 330, 360
Compressors:
Expansion valve:
down to +4 °C
Model:
H - Heat pump
Heat recovery
Version:
A - High efficiency
Coil:
° - Aluminium
R - Copper
S - Tinned copper
Fan:
° - Standard
M -High static pressure
J -Inverter
Power supply:
versions with DCPX)
05- single low head pump and buffer tank (with holes for immersion heaters)
07 - single high head pump and buffer tank (with holes for immersion heaters)
Attention:
Example of configuration code: NRL2000°H°E°°°04
This is an NRL unit of size 2000, with standard thermostatic expansion valve, heat pump model, without heat recovery, high efficiency, with
aluminium condenser coils, standard fans, and electrical panel for compressor motors 400V 3~ 50Hz, and single and standby high head pump and
buffer tank.
161
Technical Data
Mod. NRL
Cooling capacity
(kW)
Total power input
(kW)
Water flow rate
(l/h)
Pressure drops
(kPa)
EER
(W/W)
ESEER
(W/W)
Heating capacity
(kW)
Total power input
(kW)
Water flow rate
(l/h)
Pressure drops
(kPa)
COP
Power supply
Type of fan
(W/W)
(A)
Total air flow rate
(m3/h)
Total input current
fan group
(A)
(A)
(A)
Type
Evaporator
Number of hydraulic connections
2000
522
462
188
214
89780
79460
53,5
42,7
2,78
2,16
3,96
3,88
586
186
100790
68,8
3,15
2250
576
515
203
229
99070
88580
61,4
50,6
2,84
2,25
4,04
3,97
637
203
109560
75,5
3,14
2500
*630
568
218
244
108360
97700
61,4
50,6
2,89
2,33
4,13
4,06
688
220
118340
75,5
3,13
H
HL
HA
HE
H - HL
HA - HE
H - HL
HA - HE
H - HL
HA - HE
167200
121200
28,8
442
651
209600
148800
36,0
495
763
252000
176400
43,2
548
816
8/4
8/4
8/4
2
4”
2x700
7,4
2
3”/4”
2x700
3,7+4,8
2
4”
2x700
9,6
All
13,0
6,5+8,6
17,2
H/HL
HA/HE
H/HL
HA/HE
H
HL
HA
HE
H
HL
HA
HE
12,4
22,0
111
131
225
247
6,2+8,1
11+14,6
128
150
269
293
16,2
29,2
128
150
269
293
(Ø)
Input power
low-head pump
Input power
high-head pump
Input current
low-head pump
Input current
high-head pump
(l)
All
All
All
2
H - HL
HA - HE
All
(kW)
All
Useful pump head
low-head (**)
Useful pump head
high-head (**)
(n°)
Vers.
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H
HL
HA
HE
H - HL
HA - HE
H - HL
HA - HE
H - HL
HA - HE
H - HL
HA - HE
H - HL
HA - HE
All
(kW)
(A)
(A)
(kPa)
(kPa)
*2800
666
604
702
638
280
308
252
280
114550
103890
120740
109740
40,2
33,4
48,0
40,3
2,38
1,96
2,79
2,28
3,57
3,47
3,91
3,85
768
776
252
248
132100
133470
53,7
58,2
3,05
3,13
400V - 3 - 50Hz
Axial
174800
131000
248400
180000
28,8
43,2
588
606
797
815
Scroll
10/4
Plate
Victaulic
2
4”
4”
2x700
9,6
*3000
734
664
776
710
318
348
286
316
126250
114210
133470
122120
40,4
33,6
48,6
41,2
2,31
1,90
2,71
2,25
3,50
3,43
3,82
3,74
854
866
282
278
146890
148950
55,4
60,1
3,03
3,12
*3300
846
746
874
796
332
374
302
336
145510
128310
150330
136910
46,9
37
54,0
45,4
2,54
1,99
2,89
2,37
3,53
3,44
3,85
3,81
936
968
310
306
160990
166500
58,8
66,3
3,02
3,16
*3600
908
794
944
852
358
408
324
364
156180
136570
162370
146540
45,7
35,5
53,5
44,1
2,54
1,95
2,91
2,34
3,60
3,41
3,82
3,82
1006
1046
332
326
173030
179910
57,8
65,9
3,03
3,21
173600
138800
244800
183600
28,8
43,2
646
664
855
873
248400
173800
336000
235200
43,2
57,6
730
747
998
1015
244800
171400
331200
231800
43,2
57,6
796
813
1064
1081
12/4
12/4
12/4
2
4”
4”
2x700
13,0
2
4”
4”
2x700
13,0
4”
4”
2x700
13,0
17,2
17,2
24,7
24,7
16,3
16,3
29,2
29,2
149
167
128
149
290
310
266
289
22
16,3
29,2
29,2
142
157
125
141
274
297
246
272
22
22,0
42,4
42,4
122
145
106
126
257
280
241
261
22
22,0
42,4
42,4
115
141
95
119
251
276
232
255
Mod. NRL
Sound power
Vers.
H
HL
HA
HE
H
HL
HA
HE
(dBA)
e Sound pressure
(dBA)
2000
91,5
86,0
59,5
54,0
2250
93,3
87,8
61,3
55,8
2500
94,5
89,0
62,5
57,0
2800
93,5
90,5
94,0
88,5
62
59
62
56,5
3000
93,5
90,5
93,5
88,0
61,5
58,5
61,5
56,0
3300
95,0
92,0
95,0
89,5
63,0
60,0
63,0
57,5
3600
95,0
92,0
97,0
91,5
65,0
62,0
65,0
59,5
* data declared ISO 14511
** The useful head is calculated in cooling mode
 Sound pressure measured in free field conditions, in cooling mode, at distance of
10m and directivity factor = 2. In accordance with the ISO 3744 - Power supply voltage: 400 V
Cooling
- ∆t = 5 °C.
Heating:
- external air temperature 7 °C B.S. 6 °C B.U.;
- ∆t = 5 °C.
Dimensions (mm)
C
B
A
Mod. NRL
U.M.
Height
C
(mm)
Width
A
(mm)
Length
B
(mm)
(kg)
200
2450
2200
6400
4930
225
2450
2200
7250
5360
250
2450
2200
8100
5780
280
2450
2450
2200
2200
8100
8100
6080
6190
300
2450
2450
2200
2200
8100
8100
6490
6630
330
2450
2450
2200
2200
8100
11100
6660
7710
360
2450
2450
2200
2200
8100
11100
6880
7980
Cod.: SNRLMSHUY.03 / 1102
Weight empty
Vers.
H - HL
HA - HE
H - HL
HA -HE
H - HL
HA - HE
H - HL
HA-HE
162
163
new
NRP
00 |P1- P2-P3-P4
01...08
VT
P1|R1...P4|R4
GP
HA
HE
TRX1
all
DRE
all
RIF
all
AER485P1
all
AERWEB300
all
PGD1
all
Multipurpose air cooled units with axial fans
R410A
0200
17
13
17
GP3
✔
281
54
✔
✔
✔
0240
17
13
17
GP3
✔
281
54
✔
✔
✔
0280
17
13
17
GP3
✔
281
50
✔
✔
✔
0300
17
13
17
GP4
✔
301
50
✔
✔
✔
0330
17
13
17
GP4
✔
331
50
✔
✔
✔
0350
17
13
17
GP4
✔
351
51
✔
✔
✔
0500
13
10
13
GP2x2
GP2x2
✔
501
52
✔
✔
✔
0550
13
10
13
GP2x2
GP2x2
✔
551
52
✔
✔
✔
0600
13
10
13
GP2x2
GP2x2
✔
601
53
✔
✔
✔
0650
13
10
13
GP2x2
GP2x2
✔
651
53
✔
✔
✔
0700
22
22
22
GP2x3
GP2x3
✔
701
53
✔
✔
✔
0750
23
23
23
GP10x3
GP10x3
✔
751
53
✔
✔
✔
Choosing the unit
By appropriately combining the variety of options available, it is possible to configure every model in a manner that satisfies all specific system
requirements.
1 2 3
456
7
8
9
10
11
12 13 14
15 16
| || | | | | |
|
|
Code
| Compressor
| System type
|
Fan
|
System integrated
|
|| ||
hydronic module
|
Size
Version
Coil
Power supply Heat recovery integrated hydronic module
• Axial fans with low sound level.
• Extremely solid structure with anti-corrosion
polyester paint.
- Maximum leaving water temperature 55 °C.
- External air temperature from -15 °C to 42 °C.
Range:
• Units fitted as standard with fan speed con• Refrigerant R410A.
troller (DCPX), which permits operation in the
• 2 refrigerant circuits.
winter with external temperatures down to
• High efficiency even at part load.
–10 °C, and in heating mode with external
temperatures up to 42 °C.
the excellent heat transfer characteristics of • Available versions:
R410A.
- “A” High efficiency heat pump.
• High efficiency scroll compressors.
- “E” High efficiency low noise heat pump.
Size:
020, 024, 028, 030, 033, 035, 050, 055, 060, 065, 070, 075
Compressor:
0 - Standard compressors with R410A
Features
NRP is the range of multipurpose external units
operating on refrigerant R410A, designed for 2
or 4-pipe systems. With just one unit simultaneous and independent requests for hot and
chilled water can be accommodated all year
round.
Code:
NRP
• Fans:
- “°” Standard.
- “M” High static pressure.
- “J” Inverter.
• Options for integrated hydronic modules with
pumps, buffer tank, water filter, flow switch,
expansion tank.
• Microprocessor controls.
Accessories
• VT: Anti-vibration mounts to be installed • AER485P1: RS-485 interface for supervising
under the base of the unit.
• GP: Protection grille protects the external • AERWEB300: The AERWEB option allows
coil from accidental damage.
remote control of a chiller through a stand- • PGD1: Simplified remote panel. Allows con• TRX1: Metal cap that replaces the plastic
trol of basic unit functions and alarm notificacap, mounted as shipping protection, for
tion. Remote mounted up to 500 m away
immersion heater holes in the buffer tank.
with TWISTED PAIR SCREENED cable and
• DRE: Electronic soft starter which reduces
TCONN6J000.
starting current by about 26%. Available only
network;
with 400V power supply. Factory fitted only.
network;
only.
Version:
A - High efficiency
System type:
2 - 2-pipe system (cooling + DHW heating)
4 - 4-pipe system (cooling + heating)
Coil:
° - Aluminium
R - Copper
S - Tinned copper
V - Coated aluminium (epoxy paint)
System integrated hydronic module (1):
00- without pumps or buffer tank
01 -low head pump and buffer tank
02 -low head and standby pump and buffer tank
03 -high head pump and buffer tank
04 -high head and standby pump and buffer tank
05- low head pump and buffer tank (with holes for immersion heaters)
06- low head and standby pump and buffer tank (with holes for
immersion heaters)
07- high head pump and buffer tank (with holes for immersion heaters)
08- high head and standby pump and buffer tank (with holes for
immersion heaters)
P1 - only low head pump
P2 - only low head and standby pump
P3- only high head pump
P4- only high head and standby pump
Heat recovery integrated hydronic module (2):
00-without pumps
R1 - only low head pump
R2 - only low head and standby pump
R3- only high head pump
R4- only high head and standby pump
Fan:
° - Standard
M - High static pressure (only sizes 0200-0350)
J - High static pressure inverter (only sizes 0500-0750)
Power supply:
° - 400V/3N/50Hz with circuit breakers
1 - 230V/3/50Hz with circuit breakers
(not available for sizes 0200, 0240, 0750)
2 - 500V/3/50Hz with circuit beakers
(not available for sizes 0200, 0240, 0350, 0500, 0550, 0700, 0750
contact the head office)
Attention:
- Sizes 0200 to 0350 only available in low noise version "E".
(1) 4-pipe cooling and heating
2-pipe cooling or heating
(2) 2-pipe system - can works as priority regardless of main system
operation
CONFIGURATION POSSIBILITY BETWEEN
HYDRONIC MODULES
FOR NRP 0200 … 0750
heat recovery hydronic module
system hydronic module
•designed for 2 and 4-pipe systems for external installation
•High efficiency version
00
01
02
03
04
05
06
07
08
P1
P2
P3
P4
00
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
R1
ok
nd
nd
nd
nd
nd
nd
nd
nd
ok
ok
ok
ok
R2
ok
nd
nd
nd
nd
nd
nd
nd
nd
ok
ok
ok
ok
R3
ok
nd
nd
nd
nd
nd
nd
nd
nd
ok
ok
ok
ok
R4
ok
nd
nd
nd
nd
nd
nd
nd
nd
ok
ok
ok
ok
nd = not available
164
165
1
NRP
Cooling capacity
Total input power
Water flow rate
Pressure drop
SISTEM SIDE
EER
2
3
Heating capacity
Total input power
Water flow rate
Pressure drop
SISTEM SIDE vers. 2 pipe system
Pressure drop
DHW SIDE/SYSTEM SIDE*
COP
Cooling capacity
Heating capacity
Total input power
Evaporator water flow rate
Evaporator Pressure drop
system side
Recovery water flow rate
Recovery water flow rate
Total Efficiency Ratio (TER)
Dimensions (mm)
u.m
Version
A
E
A
(kW)
E
A
(l/h)
E
A
(kPa)
E
(W/W) A
(W/W) E
(kW) A/E
(kW) A/E
(l/h) A/E
(kW)
0200
43
13,8
7400
26
3,12
46
13,1
7912
0240
50
16,3
8600
37
3,06
53
15,3
9116
0280
56
18,7
9549
22
2,96
60
17,5
10236
0300
64
20,6
10956
29
3,10
75
22,0
12833
0330
68
23,0
11711
22
2,97
80
23,6
13732
31
34
42
45
45
56
66
83
(kPa)
A/E
13
17
21
33
38
19
31
34
51
49
35
50
(W/W)
(kW)
(kW)
(kW)
(l/h)
A/E
A/E
A/E
A/E
A/E
3,50
45
58
13,0
7740
3,46
52
67
15,2
8944
3,41
58
75
17,5
9890
3,40
68
88
20,0
11696
3,38
73
95
22,0
12556
3,33
86
111
25,0
14792
3,30
102
132
30,0
17544
3,25
110
142
32,0
18920
3,37
132
174
42,0
22704
3,39
147
193
46,5
25198
3,28
167
218
51,0
28724
3,34
200
261
61,0
34400
(kPa)
A/E
30
40
24
33
26
36
39
43
42
52
61
78
(l/h)
A/E
9976
11520
12900
15136
16340
19092
22704
24424
29928
33196
37496
44892
(kPa)
A/E
(W/W) A/E
20
27
33
46
54
33
47
55
82
78
56
80
8,10
7,82
7,57
7,80
7,64
7,88
7,80
7,88
7,29
7,30
7,55
7,56
400V/3N/50Hz
55
-
-
-
-
-
59
72
82
88
113
E
A/E
A/E
28
33
38
41
45
52
60
64
79
91
99
36
119
41
150
46
155
53
184
58
190
63
200
76
214
81
220
100
232
112
243
122
261
120
144
320
A/E
2/2
2/2
2/2
2/2
2/2
2/2
3/2
3/2
4/2
4/2
4/2
4/2
37000
21100
2
36500
21400
2
36500
22400
2
58000
31900
3
48000
34600
3
-
-
-
-
-
50
50
50
50
50
A
A
A
C
(m³/h) A
E
(n°)
A/E
(Pa)
dB(A)
Axial
37000
26000 20200
8
2
20000
6
20000
6
20000
6
26000
8
26000
8
70
70
70
70
70
70
-
-
-
-
-
-
2”1/2
2”1/2
2”1/2
2”1/2
2”1/2
-
50
Plate
Victaulic
2”1/2
2”1/2
B
NRP 0200 ÷ 0280
2”1/2
2”1/2
2”1/2
3”
120
160
135
175
126
165
128
166
300
300
300
300
300
42
74
42
74
42
74
43
75
43
75
42
42
42
43
43
44
74
74
74
75
75
76
3 Cooling mode with heat recovery:
120
159
133
140
173
180
124
135
211
223
95
114
181
200
113
125
177
192
104
110
224
231
500
500
500
500
700
50
42
82
74
50
42
82
74
51
43
83
75
53
45
85
77
53
45
85
77
50
50
50
51
53
53
82
82
82
83
85
85
141
147
181
186
300
500
COOLING MODE
50
44
42
82
76
74
HEATING MODE
heat recovery leaving water temperature 45 °C
evaporator leaving water temperature 7 °C
∆T
5K
Sound power:
Aermec determines sound power values in
accordance with ISO 9614-2, as required for Eurovent
certification.
A
C
C
B
B
NRP 0500 ÷ 0650
NRP
Width (mm)
Length (mm)
132
172
NRP 0300 ÷ 0350
A
Height (mm)
2”1/2
B
C
scroll
Cooling mode:
external air temperature
35 °C
∆T 5K
Heating mode:
condenser leaving water temperature 45°C
evaporator air temperature 7 °C db / 6 °C wb
∆T
5K
166
0750
185
179
63,5
69,6
31749
30867
67
63
2,91
2,58
205
61,4
35340
39
(Pa)
Evaporator
Hydraulic connection type
Hydraulic connections size
(Ø)
hydronic module
Pumps - Useful head (calculated in cooling mode)
A
Low head pump
(kPa)
E
A
High head pump
(kPa)
E
Buffer tank
Capacity
(l)
Sound data
A
Sound pressure
dB(A)
E
A
Sound power
dB(A)
E
2
0700
160
153
54,3
61,1
27556
26270
56
51
2,95
2,50
173
52,8
29796
25
(A)
(A)
1
0650
141
131
49,8
54,9
24211
22457
48
41
2,83
2,38
152
44,9
26146
42
Compressors
Compressors (n°/circuit)
Fans
Sound power
0600
124
116
43,6
47,9
21269
19874
37
32
2,83
2,41
137
40,6
23507
31
(A)
Sound pressure
0550
104
99
35,5
38,5
17949
17051
39
35
2,94
2,58
112
34,5
19290
A/E
Total input current
Quantity of fans
High static pressure fans (M)
Inverter fans (J)
13776
31
3,00
84
25,3
14526
0500
100
95
32,0
34,8
17118
16390
37
34
3,11
2,74
106
32,1
18242
(kPa)
Electrical data
Power supply
Air flow rate
0350
80
26,7
Weight empty
u.m
A
B
C
(kg)
A/E
A/E
A/E
A/E
NRP 0700 ÷ 0750
0200
0240
0280
0300
0330
0350
0500
0550
0600
0650
0700
0750
1606
1606
1606
1606
1606
1606
1875
1875
1875
1875
1875
1975
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1500
2700
2700
2700
3200
3200
3200
3280
3280
3280
3280
4280
4350
788
790
792
862
872
894
1233
1237
1359
1378
1591
1939
Attention: weights refer to units without pumps or buffer tank.
Cod.: SNRP0200-0750UY.00 /1112
Technical data
Sound Pressure:
Sound pressure measured in free field conditions over
a reflective plane (directivity factor Q=2) at 10 m
distance from external surface of unit, in accordance
with ISO 3744.
*DHW SIDE/SYSTEM SIDE
DHW side, production of domestic hot water, in
2-pipe systems.
System side, production of hot water, in 4-pipe
systems.
167
new
NRP
NRP
AVX
Multipurpose air cooled units with axial fans
GP
AER485P1
AERWEB300
DRE
PGD1
RIF
R410A
00
P1-P2-P3-P4
P1|R1...P4|R4
all
all
all
all
all
all
0800
704
706
706
GP260
✔
✔
801
✔
88
0900
710
712
712
GP260
✔
✔
901
✔
90
1000
1250
716
719
712
721
712
721
GP260
GP350
✔
✔
✔
✔
1001
1251
✔
✔
92
92
1400
725
727
727
GP350
✔
✔
1401
✔
93
1500
730
732
732
GP350
✔
✔
1501
✔
94
1650
734
736
736
GP500
✔
✔
1651
✔
94
1800
737
736
736
GP500
✔
✔
1801
✔
94
Unit Configurator
By suitably combining the numerous options available it is possible to configure each model in such a way as to meet even the most demanding of
system requirements.
• designed for 2 and 4-pipe systems for external installation
1 2 3
456
7
8
9
10
11
12 13 14
15 16
||||||||||
Code |Compressor|System type|
Fan
|
System integrated
|
||||
hydronic module
|
Size
VersionCoil
Power supply
Heat recovery integrated
hydronic module
Features
Code:
NRP
• Ventilation Unit:
- “°” Standard.
- “J” Inverter.
• Options for integrated hydronic modules with
pumps, water filter, flow switch, expansion
tank.
• Microprocessor controls.
Accessories
• AVX: Anti-vibration mounts to be installed
AERWEB300-18: Web server to monitor and • RIF: Power factor correction. Connected in
under the base of the unit.
• GP: Protection grille protects the external
network;
coil from accidental damage.
• AER485P1: RS-485 interface for supervising
only.
• PGD1: Simplified remote panel. Allows control
of basic unit functions and alarm notification.
• AERWEB300: The AERWEB option allows
Remote mounted up to 500 m away with
remote control of a chiller through a standremote control maximum 18 units on RS485
T W I S T E D PA I R S C R E E N E D c a b l e a n d
TCONN6J000.
• DRE: Electronic soft starter which reduces
starting current by about 26%. Available only
with 400V power supply. Factory fitted only.
network;
168
Size:
080, 090, 100, 125, 140, 150, 165, 180
Compressor:
0 - Standard compressors with R410A
Version:
A - High efficiency
System type:
2 - 2-pipe system (cooling + DHW heating)
4 - 4-pipe system (cooling + heating)
Coils:
° - Aluminium
R - Copper
S - Tinned copper
V - Coated aluminium (epoxy paint)
Fans:
° - Standard
J - High static pressure inverter
Power supply:
° - 400V/3N/50Hz with circuit breakers
2 - 500V/3/50Hz with circuit beakers
(contact the head office)
(1) 4-pipe cooling and heating
2-pipe cooling or heating
(2) 2-pipe system - can works as priority regardless of main system operation
NRP
system hydronic
module
• Axial fans with low sound level.
• Extremely solid structure with anti-corrosion
polyester paint.
- Maximum leaving water temperature 55 °C.
- External air temperature from -15 °C to 42 °C.
Range:
• Units fitted as standard with fan speed con• Refrigerant R410A.
troller (DCPX), which permits operation in the
• 2 refrigerant circuits.
winter with external temperatures down to
• High efficiency even at part load.
–10 °C, and in heating mode with external
temperatures up to 42 °C.
the excellent heat transfer characteristics of • Available versions:
R410A.
- “A” High efficiency heat pump.
• High efficiency scroll compressors.
- “E” High efficiency silenced heat pump.
configuration POSSIBILITY Between
hydronic MODULES
FOR NRP 0800 … 1000
°
ok
ok
ok
ok
ok
°
P1
P2
P3
P4
R1
ok
ok
ok
ok
ok
R2
na
na
na
na
na
R3
ok
ok
ok
ok
ok
R4
na
na
na
na
na
n.a. = not available
NRP
system hydronic
module
NRP is the range of multipurpose external units
operating on refrigerant R410A, designed for 2
or 4-pipe systems. With just one unit simultaneous and independent requests for hot and
chilled water can be accommodated all year
round.
System integrated hydronic module (1):
00- without pumps or buffer tank
P1 - only low head pump
P2 - only low head and standby pump
P3- only high head pump
P4- only high head and standby pump
Heat recovery integrated hydronic module (2):
00-without pumps
R1 - only low head pump
R2 - only low head and standby pump
R3- only high head pump
R4- only high head and standby pump
configuration POSSIBILITY between
hydronic MODULES
FOR NRP 1250 … 1800
°
P1
P2
P3
P4
°
ok
ok
ok
ok
ok
R1
ok
ok
ok
ok
ok
R2
ok
ok
ok
ok
ok
R3
ok
ok
ok
ok
ok
R4
ok
ok
ok
ok
ok
169
Technical data
Cooling capacity
Total input power
Water flow rate
Pressure drop
SISTEM SIDE
EER
2
3
Dimensions (mm)
Version
A
(kW)
E
A
(kW)
E
A
(l/h)
E
A
(kPa)
E
(W/W) A
(W/W) E
(kW) A / E
(kW) A / E
(l/h) A / E
u.m
Heating capacity
Total input power
Water flow rate
Pressure drop
SISTEM SIDE vers. 2 pipe system
Pressure drop
COP
Cooling capacity
Heating capacity
Total input power
Evaporator Pressure drop
system side
Heat recovery water flow rate
Heat recovery water flow rate
Total Efficiency Ratio (TER)
(kPa)
A/E
0800
218
200
72,4
80,3
37498
34477
59
50
3,01
2,50
241
73,2
41498
0900
243
217
82,2
94,3
41841
37289
58
47
2,96
2,30
258
79,7
44312
1000
260
230
88,2
100,4
44753
39609
54
43
2,95
2,29
290
87,8
49946
1250
323
291
107,7
120,5
55506
50044
64
54
3,00
2,41
384
114,5
66115
1400
365
332
121,0
134,4
62852
57122
52
43
3,02
2,47
400
119,5
68833
1500
402
368
135,0
149,2
69171
63288
53
44
2,98
2,47
459
137,6
78870
1650
441
402
145,3
161,6
75888
69115
55
46
3,04
2,49
503
153,0
86579
1800
477
430
155,9
175,1
81966
73977
55
45
3,06
2,46
544
164,6
93555
73
66
68
93
63
68
72
72
(kPa)
A/E
50
44
49
49
44
51
51
53
(W/W)
(kW)
(kW)
(kW)
(l/h)
A/E
A/E
A/E
A/E
A/E
3,29
223
289
66,0
38356
3,23
251
328
77,0
43172
3,31
278
364
86,0
47817
3,36
334
432
98,0
57449
3,35
379
491
112,0
65189
3,33
422
550
128,0
72585
3,29
463
598
135,0
79637
3,30
496
642
146,0
85313
(kPa)
A/E
62
62
62
71
56
58
61
60
(l/h)
A/E
49709
56417
62609
74305
84453
94601
102857
110425
(kPa)
A/E
72
72
77
63
66
73
72
74
7,76
7,52
7,47
7,82
7,77
7,59
7,86
7,79
A
136
158
180
400V/3/50Hz
196
235
273
289
304
E
A/E
A/E
145
173
348
169
195
404
192
217
426
211
267
535
292
325
534
306
365
633
324
398
666
(W/W) A / E
Electrical data
Power supply
Total input current
(A)
Compressors
Compressors (n°/circuits)
Fans
(A)
(A)
Air flow rate
Quantity of fans
Inverter fans (J)
A/E
(m³/h) A
E
(n°)
A/E
Sound pressure
dB(A)
Sound power
dB(A)
Sound power
1
2
3
170
4/2
4/2
4/2
5/2
A
E
A
E
dB(A)
Cooling mode:
external air temperature
35 °C
∆T 5K
Heating mode:
condenser leaving water temperature 45°C
7 °C db / 6 °C wb
evaporator air temperature ∆T
5K
Cooling mode with heat recovery:
heat recovery leaving water temperature
45 °C
evaporator leaving water temperature
7 °C
∆T
5K
C
B
6/2
6/2
6/2
Axial
(Pa)
Evaporator
Hydraulic connections type
Hydraulic connections size
(Ø)
Hydronic module
Pumps - Useful head (calculated in cooling mode)
A
Low head pump
(kPa)
E
A
High head pump
(kPa)
E
Sound pressure
4/2
251
296
505
A
85600
59920
4
84600
59220
4
83600
60610
4
126000
88200
6
124200
90000
6
122400
91800
6
168000
117600
8
165600
115920
8
50
50
50
50
50
50
50
50
4"
4"
4"
4"
125
141
246
272
106
126
241
261
95
119
232
255
58,5
53
91,5
85
60
54,5
92
86,5
62
56,5
94
88,5
NRP
Height (mm)
Width (mm)
Length (mm)
Weight empty
u.m
A
B
C
(kg)
A/E
A/E
A/E
A/E
0800
0900
1000
1250
1400
1500
1650
1800
2450
2450
2450
2450
2450
2450
2450
2450
2200
2200
2200
2200
2200
2200
2200
2200
3400
3400
3400
4250
4250
4250
5750
5750
2270
2460
2640
2970
3220
3430
3950
4090
Attention: weights refer to units without pumps or buffer tank.
plate
Victaulic
3"
3"
3"
4"
123
135
240
252
114
132
230
249
111
131
225
247
56,5
51
88,5
83
56,5
51
88,5
83
56,5
51
88,5
83,5
56,5
56,5
56,5
59,5
59
58,5
60
62
88,5
88,5
88,5
91,5
91
91,5
92
94
128
128
150
149
269
266
293
289
Cooling mode
59,5
59
54
53,5
91,5
91
86
85,5
Heating mode
Sound power:
Aermec determines sound power values in
accordance with ISO 9614-2, as required for
Eurovent certification.
Sound Pressure:
Sound pressure measured in free field conditions
over a reflective plane (directivity factor Q=2) at 10
m distance from external surface of unit, in
accordance with ISO 3744.
Cod.: SNRP0800-1800UY.00 /1112
1
NRP
* DHW SIDE/SYSTEM SIDE
DHW side, production of domestic hot water, in
2-pipe systems.
System side, production of hot water, in 4-pipe
systems.
171
NRL
Free Cooling
Air cooled chiller with axial flow fans
Cooling capacity from 58 kW up to 174 kW
Mod. NRL
AER485
dualchiller
multichiller
PGS
AERWEB300
VT
DRE
GP
RIF
PRM1-PRM2
R410A
Vers.
All
All
All
All
All
00 - P3 - P4
03 - 04
All
All
All
All
280
✔
✔
✔
✔
✔
17
13
281
4
50
✔
300
✔
✔
✔
✔
✔
17
13
301
4
50
✔
330
350
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
17
17
13
13
331
351
4
4
50
51
✔
✔
500
✔
✔
✔
✔
✔
13
10
501
2(x2)
52
✔
550
✔
✔
✔
✔
✔
13
10
551
2(x2)
52
✔
600
✔
✔
✔
✔
✔
22
22
601
2(x3)
53
✔
650
✔
✔
✔
✔
✔
22
22
651
2(x3)
53
✔
700
✔
✔
✔
✔
✔
22
22
701
2(x3)
53
✔
Choice of Unit
requirements.
Field configurator:
1 2 3
456
7
8
9
10
11
12
13
14
15-16
|||||||||| |
Code |
Compressor
| Model |Version| Fan | Storage tank
|||||
Size
Valve
Recovery units
Coils
Power supply
Heat thermostat
•High efficiency version
•SILENCED high efficiency version
•Version with circulation pump
•2 cooling circuits
•Version with circulation pump and storage tank
Features
• Refrigerant R410A.
• 2 cooling circuits
• High efficiency even with partial loads
• Heat exchangers optimised to exploit the excellent heat transfer characteristics of the R410A
• High-efficiency scroll compressors
• Axial flow fans with reduced noise level
• Solid construction with polyester anticorrosion
painted finish
• Cooling mode up to 44° C
• Operation modes:
- Free-Cooling only: is the most economical way
to use the unit. Only the fans operate in modulation of speed, the cooling power is fully recovered
from the external air
- mixed Free-Cooling and compressors: the cooling power recovered from the external air is integrated with the total or partial operation of the
compressors
- compressors only: the cooling capacity is provided entirely by the compressors (standard operation of a chiller)
- High efficiency
- Silenced high efficiency
-Glycole-free
- With pumping assembly (high-head, with/
without reserve pump)
- Versions with pumping assembly and 300 litre
tank, complete with water filter, flow switch,
expansion tank and antifreeze electric heater
- Electronic thermostatic valve
- Enlarged fans
• Microprocessor control system of the compressors
and fans for the management of the three operating modes (Free-Cooling only, mixed FreeCooling and compressors and compressors only)
• Display of all operating parameters in 4 languages.
• Simplified remote control panel with shielded
cable up to 50 m. Performs the basic checks of the
unit with alarm warnings.
• High efficiency air-water exchanger (Free-Cooling)
with smooth tubes and corrugated fins
• Three-way valve located on the water side for
water switch-over on the Free-Cooling coils
• High and low pressure transducers(standard for all
versions)
• Fan speed adjustment device for low air temperature operation. Manages the cooling capacity in
the Free-Cooling mode
Accessories
• AER485: RS-485 interface for supervision
• VT: anti-vibration support, to be fitted below
the sheet metal base of the unit.
for two-circuit-units, 22% for three-circuitunits)
Only available for 400V-3-phase power supply. It must be factory set
• GP: Protection grille, protects the external
coil from accidental knocks.
• PGS: Daily/Weekly Programmer.
Allows you to programme two time bands per
day (two switch on/off cycles) and to have differentiated programming for each day of the
week.
• RIF: Capacitor device . Connected in parallel
to the motor winding. It allows to maintain a
172
costant COSd at 0.95 and also allows an
input current reduction (about 10%).
It must be factory set when the unit is manufactured
• AERWEB300: Accessory AERWEB allows
remote control of a chiller through a common PC and an ethernet connection over a
- AERWEB300-6: Web server to monitor and
- AERWEB300-6G: Web server to monitor and
remote control max. 18 units in RS485 network with integrated GPRS modem
switch on and off, and command, two chillers
(using Aermec GR3 command) in a single
system, as if they were a single unit.
• MULTICHILLER: Control system to switch the
individual chillers on and off, and command
them, in a system in which several units are
installed in parallel, always ensuring a constant delivery to the evaporators.
• PRM1-PRM2: FACTORY FITTED ACCESSORY.
It is a manual pressure switch electrically
wired in series with the existing automatic
high pressure switch on the compressor
discharge pipe.
Code:
NRL
Size:
028, 030, 033, 035, 050, 055, 060, 065, 070
Compressors:
0 - standard compressor with R410A
Thermostatic valve:
° - Standard mechanical thermostatic valve
Y -Mechanical thermostatic valve with processed water
from +4°C down to -6 °C
X - Electronic thermostatic valve also with processed water down to +4°C
(for different temperature contact the head office)
Model:
F -Free-cooling
B -Free-cooling glycol free
Heat recovery units:
° - Without recovery units
Version:
A -High efficiency
E - High efficiency, silenced version
Batteries:
° - Aluminium
R - Copper
S - Tinned copper
V -In painted aluminium (epoxy paint)
Fans:
° - Standard
M -Oversized
Alimentazione:
° - 400V 3N~ 50Hz with thermomagnetic switches
1 - 230V 3~ 50Hz with thermomagnetic switches
2 - 500V 3~ 50Hz with thermomagnetic switches
(contact the company head office for versions with DCPX)
Storage tank: (options listed are available only for models "F" free
cooling)
00-without storage tank
03- high-head storage tank and single pump
04- high-head storage tank and reserve pump
P3- without storage tank, with high-head pump
P4- without storage tank, with high-head pump
and reserve pump
ATTENTION:
The “B” model (free-cooling glycol free) can not be
configured with hydronic kit.
Warning:
Example of the commercial code: NRL0350°F°A°°°00
This is a size 035 NRL unit with standard mechanical thermostatic valve, Free-cooling model, high efficiency, with aluminium condensing coils,
standard fans, electrical panel for compressors with 400V 3N~ 50Hz motors and without storage tank.
173
Technical data
Technical data
Mod. NRL Free Cooling
Cooling capacity
(kW)
Total power input
(kW)
Water flow rate
(l/h)
Total pressure drop
(kPa)
EER
(W/W)
Input current
(A)
Cooling capacity
Total power input
(kW)
(kW)
Water flow rate
(l/h)
Total pressure drop
(kPa)
EER
Input current
(W/W)
(A)
(A)
(A)
(n°/n°)
Sound power
dB(A)
Sound pressure
Plumbing connections
Motor input power
Motor input current
Air flow rate
dB(A)
(Ø)
(kW)
(A)
(m3/h)
Vers.
A
E
A
E
A
E
A
E
A
E
A
E
A/E
A/E
A
E
A
E
A/E
A/E
A/E
A/E
A/E
A
E
A
E
0
A/E
A/E
A
E
Hydronic kit for models only "F" Free Cooling
Tank capacity
(l)
A/E
Input power
(kW)
A/E
pump motor
Input current
(A)
A/E
pump motor
A
Useful head (chiller)
kPa
E
A
Useful head (freecooling)
kPa
E
-
280
59,0
18,1
10150
63
3,26
32
58,0
1,05
10150
95,6
55,24
4,6
46
155
2/2
74
42
2"1/2
0,9
3,9
20000
300
65,0
21,8
11180
53
2,98
38
68,0
1,05
11180
69,1
64,76
4,6
53
184
2/2
74
42
2"1/2
0,9
3,9
19000
330
74,0
24,0
12730
66
3,08
41
83,0
1,35
12730
85,8
61,48
5,9
58
190
2/2
75
43
2"1/2
1,2
5,2
25000
350
82,0
28,3
14100
58
2,90
51
85,0
1,35
14100
82,2
62,96
5,9
63
200
2/2
76
44
2"1/2
1,2
5,2
25000
500
99,0
91,0
33,7
37,0
17030
15650
60
51
2,93
2,46
61
67
103,0
2,65
17030
15650
79,2
67
38,87
5,9
76
214
3/2
82
74
50
42
2"1/2
2,5
5,6
32500
23400
550
104,0
95,0
37,3
40,0
17890
16340
69
58
2,79
2,37
65
70
104,0
2,65
17890
16340
90,1
75
39,25
5,9
81
220
3/2
82
74
50
42
2"1/2
2,5
5,6
32500
24100
600
132,0
119,0
44,5
49,2
22700
20470
78
63
2,96
2,42
79
87
137,0
3,9
22700
20470
107,9
88
35,13
8,7
100
232
4/2
82
74
50
42
2"1/2
3,75
8,4
50000
33500
650
144,0
130,0
51,7
59,8
24770
22360
73
60
2,79
2,17
84
97
159,0
3,9
24770
22360
107,2
87
40,77
8,7
112
243
4/2
83
75
51
43
2"1/2
3,75
8,4
49000
35300
700
159,0
147,0
60,8
65,8
27350
25280
87
74
2,62
2,23
101
109
174,0
5,4
27350
25280
124,1
106
32,22
11,6
122
261
4/2
85
77
53
45
2"1/2
5,25
11,3
56000
47600
300
300
300
300
300
300
300
300
300
1,5
1,5
1,5
1,5
1,85
1,85
3
3
3
3,6
3,6
3,6
3,6
5
5
5,7
5,7
5,7
124
88
132
115
110
88
118
91
144
160
123
142
132
151
109
131
147
174
114
147
137
169
122
156
99
131
77
115
Cooling:
water outlet temperature 7 °C;
outside air temp. 35 °C;
∆t = 5°C.
Water flow rate
Total pressure drop
Input current
Sound power
Sound pressure
Air flow rate
-
Vers.
BA|BE
BA|BE
BA
(l/h)
BE
BA
(kPa)
BE
A
BA|BE
dB(A) BA|BE
dB(A) BA|BE
(m3/h) BA|BE
kW
kW
280
45
1,85
10150
94
8,1
74
42
20000
300
52
1,85
11180
88
8,1
74
42
19000
330
64
2,35
12730
90
10,3
75
43
25000
350
66
2,35
14100
82
10,3
76
44
25000
500
79
3,65
17030
15650
92
78
8,1
82
50
32500
550
80
3,65
17890
16340
101
84
8,1
82
50
32500
600
104
5,2
22700
20470
101
82
11,6
83
51
50000
650
122
5,7
24770
22360
104
85
12,7
84
52
49000
700
133
7,7
27350
25280
120
103
16,5
87
55
56000
Cooling in Free-Cooling Glycol free
water inlet temperature 15°C;
outside air temperature 2°C;
nominal water flow rate;
compressors off.
Dimensions (mm)
Cooling in Free-Cooling mode
water inlet temperature 15°C;
outside air temperature 2°C;
compressors off.
Sound pressure
measured in free field conditions, in cooling mode, at distance of
10m and direction factor = 2.
In accordance with the ISO 3744 standard
Mod. NRL
Height
Width
A
B
U.M.
(mm)
(mm)
Depth
C
(mm)
Weight when empty
A
(kg)
Vers.
A/E
A/E
A/E 00
FA/FE
BA/BE
-
280
1606
1100
300
1606
1100
330
1606
1100
350
1606
1100
500
1875
1100
550
1875
1100
600
1875
1100
650
1875
1100
700
1875
1100
2950
2950
2950
2950
3200
3200
3950
3950
3950
838
908
913
922
1079
1083
1386
1460
1540
Cod.: SNRLFCUY.08 /1201
Sound power
Aermec determines the sound power value on
the basis of measurements taken in accordance
with standard 9614-2
-
Mod. NRL Free Cooling Glycol free
Cooling capacity
Total power input
174
175
NRL
Free-Cooling
Mod. NRL
AER485
dualchiller
multichiller
PGS
AERWEB300
VT
R410A
AVX
DRE
GP
RIF
PRM1-PRM2
Vers.
All
All
All
All
All
00 - P3 - P4
03 - 04
00
P3 - P4
03 - 04
All
All
All
All
750
4
4
4
4
4
23
23
751
10 (x3)
53
4
800
4
4
4
4
4
739
741
740
801
260
88
4
900
1000
4
4
4
4
4
4
4
4
4
4
739
745
744
747
743
746
901
1001
260
260
90
92
4
4
1250
4
4
4
4
4
748
750
749
1251
350
92
4
1400
4
4
4
4
4
752
754
753
1401
350
93
4
1500
4
4
4
4
4
757
758
753
1501
350
94
4
1650
4
4
4
4
4
761
763
762
1651
500
94
4
1800
4
4
4
4
4
766
763
762
1801
500
94
4
Unit Configurator
requirements.
• PUMP ASSEMBLY OPTION
• 2 REFRIGERANT circuits
• PUMP ASSEMBLY and BUFFER
Tank OPTION
1 2 3
456
7
8
9
10
11
12
13
14
15-16
|||||||||| |
Code |
Compressor
| Model |Version| Fan | Integrated
|||||
hydronic
Size
Expansion valve
Heat recovery
Coil
Power supply
module
Characteristics
R410A
• Operation up to 44° C ambient in cooling
mode
-Free-Cooling only: is the most economical
way to use the unit. Only the fans operate
by speed control. Cooling is achieved completely from the external air temperature
-combined Free-Cooling and compressors:
the cooling capacity is achieved from the
external air temperature combined with
compressor operation at full or partial load
-compressors only: the cooling capacity is
provided entirely by the compressors (standard operation of a chiller)
-High efficiency
-High efficiency low noise
-Glycol free
-With pump assembly (high head, with/without standby pump)
-With pump assembly and 700 litre buffer
tank (500 litres for size 750), complete with
water filter, flow switch, expansion tank,
charging point and antifreeze electric heater
-Electronic expansion valve
-Inverter fans
• Microprocessor control system of the com-
pressors and fans for the control of the three
operating modes (Free-Cooling only, combined Free-Cooling and compressors, and
compressors only)
• Simplified remote control panel located up to
50 m distance away with shielded cable.
Permits basic control and alarm notifications
of the unit
• High efficiency air-water coil (Free-Cooling)
with smooth tubes and wavy fins
• Three-way valve installed on the hydraulic
circuit to modulate flow to the Free-Cooling
coils
• High and low pressure transducers (standard
for all versions)
• Fan speed controller for low ambient operation. In Free-Cooling mode controls capacity
Accessories
day of the week.
only.
176
remote control of a chiller through a comparallel installed constant flow chillers promon PC and an ethernet connection over a
viding individual chiller on/off and control
capability.
remote control max. 6 units in RS485 netACCESSORY. A manual reset pressure switch
work;
wired in series with the existing high presAERWEB300-18: Web server to monitor and
sure switch installed on the compressor disremote control max. 18 units in RS485 netcharge line.
work;
Code:
NRL
Coil:
Size:
° -Aluminium
075, 080, 090, 100, 125, 140, 150, 165, 180
R -Copper
Compressor:
S -Tinned copper
0 -R410A standard compressors
V -Anti-corrosion coated aluminium (epoxy paint)
Expansion valve:
Fan:
° - Standard thermostatic expansion valve
° -Standard
Y -Thermostatic expansion valve with leaving liquid temperature
J -Inverter
Power supply:
° -400V 3N~ 50Hz with circuit breakers
2 -500V 3~ 50Hz with circuit breakers
Model:
(contact the head office for versions with DCPX)
F -Free-cooling
Heat recovery
° -Without heat recovery
D -With desuperheater (partial heat recovery), not available for size
800-900-1000 with storage tank (03-04)
Version:
A - High efficiency
WARNING:
E - High efficiency low noise version
The model "B" (Free-cooling, Free-cooling glycol free
glycol can not be provided with hydronic kit.
Attention:
Example of configuration code: NRL0750°F°A°°°00
This is an NRL unit of size 750, with standard thermostatic expansion valve, Free-cooling model, without heat recovery, high efficiency, with
aluminium condenser coils, standard fans, and electrical panel for compressor motors 400V 3N~ 50Hz, and without pump or buffer tank.
177
Technical Data
Mod. NRL Free Cooling
Technical Data
U.M.
Cooling capacity
(kW)
Total power input
(kW)
Water flow rate
(l/h)
Total pressure drop
(kPa)
EER
(W/W)
Input current
(A)
Cooling capacity
(kW)
Total power input
(kW)
Water flow rate
(l/h)
Total pressure drop
(kPa)
EER
(W/W)
Input current
(A)
(A)
(A)
(n°/n°)
Sound power
dB(A)
 Sound pressure
dB(A)
Air flow rate
(m3/h)
Pump assembly option
Tank capacity
Input power pump motor
Input current pump motor
(Ø)
(l)
(kW)
(A)
Useful head (Chiller)
kPa
Useful head (Free-cooling)
kPa
Vers.
FA
FE
FA
FE
FA
FE
FA
FE
FA
FE
FA
FE
FA
FE
All
FA
FE
FA
FE
FA
FE
FA/FE
FA/FE
FA/FE
FA/FE
FA
FE
FA
FE
(00)
FA
FE
750
191
177
69,6
76,4,
32850
30440
103
89
2,75
2,32
123
135
187
187
5,4
32850
30440
156,3
134
34,63
34,63
11,6
144
320
4/2
87
82
55
50
2”1/2
56000
46500
800
210
196
75
80
36120
33730
77
68
2,81
2,46
144
149
182
178
7,5
36120
33730
105
93
24,30
23,76
15
177
352
4/2
88,5
82,5
56,5
50,5
3”
79600
55700
900
229
216
89
93
39390
37110
82
73
2,58
2,33
169
174
206
201
7,5
39390
37110
110
99
27,48
26,76
15
199
408
4/2
88,5
82,5
56,5
50,5
3”
78800
55200
1000
247
228
103
109
42480
39210
81
69
2,41
2,09
195
203
229
223
7,5
42840
39210
110
94
30,53
29,76
15
221
430
4/2
88,5
82,5
56,5
50,5
3”
78000
55800
1250
310
289
114
120
53320
49670
92
80
2,72
2,40
208
217
257
263
11,0
53320
49670
123
106
23,34
23,89
22
274
542
4/2
91,5
85,5
59,5
53,5
4”
115200
80600
1400
337
310
136
145
57960
53260
98
84
2,48
2,14
252
265
291
288
11,0
57960
53260
131
110
26,47
26,19
22
303
512
5/2
91
85
59,0
53,0
4”
114000
79800
1500
364
331
157
169
62610
56850
83
70
2,31
1,95
296
312
326
314
11,0
62610
56850
117
94
29,61
28,50
22
332
541
6/2
90,5
84,5
58,5
52,5
4”
112800
80700
1650
430
400
159
169
73960
68770
104
90
2,70
2,37
298
310
399
396
14,5
73960
68770
140
117
27,48
27,33
30
373
641
6/2
92
86
60,0
54,00
4”
155200
108600
1800
452
421
175
186
77740
72330
107
93
2,58
2,26
317
332
440
443
14,5
77740
72330
145
120
30,32
30,58
30
406
674
6/2
94
88
62,0
56,0
4”
153600
109800
FA/FE
FA/FE
FA/FE
FA
FE
FA
FE
500
5,5
11
177
200
119
150
700
6,5
11,0
220
233
194
211
700
6,5
11,0
210
222
184
202
700
6,5
11,0
204
223
177
203
700
8,6
14,6
242
262
214
245
700
8,6
14,6
223
250
195
234
700
8,6
14,6
224
255
195
242
700
12,3
21,2
192
214
165
197
700
12,3
21,2
182
206
155
189
Mod. NRL Free Cooling Glycol free
Cooling capacity
Total power input
Water flow rate
Total pressure drop
Input current glycol free
Sound power
 Sound pressure
Air flow rate
-
Vers.
All
All
BA
(l/h)
BE
BA
(kPa)
BE
A
BA|BE
dB(A) BA|BE
dB(A) BA|BE
(m3/h) BA|BE
kW
kW
750
143
7.7
32850
30440
130
112
16.5
87
55
56000
800
153
11.1
36111
33734
94
87
21
88.5
56.5
79600
900
170
11.1
39334
37106
102
94
21
88.5
56.5
78800
Cooling in Free-Cooling Glycol free
entering water temperature 15°C;
external air temerature 2°C;
compressors off.
1000
186
11.1
42557
39206
103
94
21
88.5
56.5
78000
1250
217
17.3
53345
49665
108
99
33
91.5
59.5
115200
1400
242
17.3
57936
53259
117
105
34
91
59.0
114000
1500
266
17.3
62526
56853
104
94
34
90.5
58.5
112800
1650
328
23.2
73935
68770
108
99
45
92
60.0
155200
1800
361
23.2
77730
72329
112
102
45
94
62.0
153600
1650
2450
2200
5750
4220
1800
2450
2200
5750
4420
Sound power:
Aermec determines the value based on the
measurements made in compliance with
the standard ISO 9614 - 2, respecting
Eurovent requirements.
e
Sound pressure:
measured in free field
conditions, in cooling mode, at distance of
10m and directivity factor = 2.
In accordance with the ISO 3744
Dimensions (mm)
A
A
290
1500
C
B
-
Cooling
leaving water temperature 7°C;
external air temperature 35°C;
∆t = 5 °C;
Sound power:
e
Cooling in Free-Cooling mode:
compressors off.
Sound pressure:
B
Mod. NRL-F / NRL-B
U.M.
Vers.
750
800
900
1000
Height
A (mm)
A/E
1955
2450
2450
2450
Width
B (mm)
A/E
1500
2200
2200
2200
Length
C (mm)
A/E
4350
3400
3400
3400
Weight empty
A
(kg)
A/E
1889
2470
2650
2840
178
1250
2450
2200
4250
3120
1400
2450
2200
4250
3380
1500
2450
2200
4250
3660
179
Code: SNRLFCUY.01 / 1007
C
NRL
Free-Cooling
Air cooled chiller with axial fans
R410A
Mod. NRL
AER485P1
PGS
TRX1
GP
RIF
PRM1/PRM2
AVX (00)
AVX (03-04)
AVX (P3-P4)
Vers.
All
All
All
A-E
A-E
All
A-E
A-E
A-E
2000
✔
✔
✔
260 x 2
RIFNRL2000
✔
770
771
772
2250
✔
✔
✔
260 - 350
RIFNRL2250
✔
776
777
778
2500
✔
✔
✔
350 x 2
RIFNRL2500
✔
782
783
784
2800
✔
✔
✔
350 x 2
RIFNRL2800
✔
788
789
790
3000
✔
✔
✔
350 x 2
RIFNRL3000
✔
794
795
796
3300
✔
✔
✔
500 x 2
RIFNRL3300
✔
801
802
803
3600
✔
✔
✔
500 x 2
RIFNRL3600
✔
801
802
803
Unit Configurator
requirements.
1 2 3
456
7
8
9
10
11
12
13
14
15-16
|||||||||| |
Code |
Compressor
| Model |Version| Fan | Integrated
|||||
hydronic
Size
Expansion valve
Heat recovery
Coil
Power supply
module
• PUMP ASSEMBLY OPTION
• 4 REFRIGERANT circuits
• PUMP ASSEMBLY AND BUFFER
TANK OPTION
Characteristics
• Operation up to 44° C ambient in cooling
mode
-Free-Cooling only: is the most economical
way to use the unit. Only the fans operate
by speed control. Cooling is achieved completely from the external air temperature
-combined Free-Cooling and compressors:
the cooling capacity is achieved from the
external air temperature combined with
compressor operation at full or partial load
-compressors only: the cooling capacity is
provided entirely by the compressors (standard operation of a chiller)
-High efficiency
-High efficiency low noise
-Glycol free
-With pump assembly (high head, with/without standby pump)
-With pump assembly and 700 litre buffer
tanks complete with water filter, flow
switch, expansion tank, charging point and
antifreeze electric heater
-Electronic expansion valve
-Inverter fans
• Microprocessor control system of the compressors and fans for the control of the three
operating modes (Free-Cooling only, combined Free-Cooling and compressors, and
compressors only)
• Simplified remote control panel located up to
50 m distance away with shielded cable.
Permits basic control and alarm notifications
of the unit
• High efficiency air-water coil (Free-Cooling)
with smooth tubes and wavy fins
• Three-way valve installed on the hydraulic
circuit to modulate flow to the Free-Cooling
coils
• High and low pressure transducers (standard
for all versions)
• Fan speed controller for low ambient operation. In Free-Cooling mode controls capacity.
Accessories
180
day of the week.
only.
line.
Code:
NRL
Size:
200, 225, 250, 280, 300, 330, 360
Compressor:
0 -R410A standard compressors
Expansion valve:
° -Standard thermostatic expansion valve
Y -Thermostatic expansion valve with leaving liquid temperature
Model:
F -Free-cooling
Heat recovery
D -With desuperheater (partial heat recovery)
Version:
A - High efficiency
Coil:
° -Aluminium
R -Copper
S -Tinned copper
V -Anti-corrosion coated aluminium (epoxy paint)
Fans:
° -Standard
J -Inverter
Power supply:
WARNING:
The model "B" (Free-cooling, Free-cooling glycol free
glycol can not be provided with hydronic kit.
Attention:
Example of configuration code: NRL2000°F°A°°°00
This is an NRL unit of size 2000, with standard thermostatic expansion valve, Free-cooling model, without heat recovery, high efficiency, with
aluminium condenser coils, standard fans, and electrical panel for compressor motors 400V 3~ 50Hz, and without pump or buffer tank.
181
Technical Data
Mod. NRL
Dimensions (mm)
U.M.
Cooling capacity
kW
Total power input
kW
Water flow rate
l/h
Total pressure drop
kPa
EER
W/W
Input current
A
Cooling capacity
kW
Total power input
kW
Water flow rate
l/h
Total pressure drop
kPa
EER
W/W
Input current
A
A
A
n°/n°
Sound power
dB(A)
e Sound pressure
dB(A)
Air flow rate
m 3/h
Pump assembly option
Input power motor pump
Input current motor pump
n°x l
kW
A
Useful head (Chiller)
kPa
Useful head (Freecooling)
kPa
-
ø
Vers.
A
E
A
E
A
E
A
E
A
E
A
E
A
E
All
A
E
A
E
A
E
A/E
A/E
A/E
A/E
A
E
A
E
All
A
E
2000
494
456
206
218
84970
78430
81
69
2,40
2,09
389
407
458
446
15
85115
78413
110
94
30,53
29,73
30
442
651
8/4
91,5
85,5
59,5
53,5
3"
156000
111600
2250
557
517
217
229
95800
88920
92
80
2,57
2,26
403
421
486
486
19
95903
88871
123
107
25,58
25,58
37
495
763
8/4
93,3
87,3
61,5
55,3
3"/4”
193200
136400
*2500
620
578
228
240
106640
99420
92
80
2,72
2,41
417
435
514
526
22
106691
99330
123
107
23,36
23,91
44
548
816
8/4
94,5
88,5
62,5
56,5
4"
230400
161200
*2800
674
620
272
290
115930
106640
98
84
2,48
2,14
504
529
582
576
22
115871
106518
131
111
26,45
26,18
44
606
815
10/4
94,0
88,0
62,0
56,0
4"
228000
159600
*3000
728
662
314
338
125220
113860
83
70
2,32
1,96
592
624
652
627
22
125052
113706
117
97
29,64
28,50
44
664
873
12/4
93,5
87,5
61,5
55,5
4"
225600
161400
*3300
860
800
318
338
147920
137600
104
90
2,70
2,37
597
621
798
792
29
147870
137540
140
122
27,52
27,31
59
747
1015
12/4
95,0
89,0
63,0
57,0
4"
310400
217200
*3600
904
842
350
372
155490
144820
107
93
2,58
2,26
634
665
880
887
29
155459
144658
145
126
30,34
30,59
59
813
1081
12/4
97,0
91,0
65,0
59,0
4"
307200
219600
All
All
All
A
E
A
E
2x700
13,0
22,0
204
223
177
199
2x700
6.5+8.6
11+14.6
242
262
214
239
2x700
17,2
29,2
242
262
214
239
2x700
17,2
29,2
223
250
195
226
2x700
17,2
29,2
224
255
195
231
2x700V
24,7
42,4
192
214
165
191
2x700
24,7
42,4
182
206
155
182
Cooling
∆t = 5 °C;
e
C
B
U.M.
Vers.
2000
2250
2500
2800
3000
3300
3600
Height
Mod. NRL-F / NRL-B
A
(mm)
A/E
2450
2450
2450
2450
2450
2450
2450
Width
B
(mm)
A/E
2200
2200
2200
2200
2200
2200
2200
Length
C
(mm)
A/E
6400
7250
8100
8100
8100
11100
11100
(Kg)
A/E
5670
6190
6700
7120
7580
9060
9330
Weight empty
Sound pressure:
Code: SNRLMSFCUY.02 / 1011
Sound power:
-
Cooling in Free-Cooling mode:
compressors off.
A
182
183
NRC
Air cooled chillers, heat pumps and condensing units with centrifugal fans
Capacities from 46 to 264 kW
R407C
Mod.
AER485
DUALCHILLER
MULTICHILLER
AVX
DR 200
DR 400
DR 202
DR 402
275
✔
✔
✔
300
✔
✔
✔
325
✔
✔
✔
✔**
✔**
✔**
✔
✔
✔
350
✔
✔
✔
500
✔
✔
✔
550
✔
✔
✔
✔**
✔**
✔**
✔
✔
✔
600
650
700
750
800
900
1000
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
401/402* 401/402* 402/403* 402/403* 404/406* 404/406* 405/407*
DR 600
✔
✔
✔
✔
DR 800
DRE 275
DRE 300
✔
✔ (x2)
✔
✔ (x2)
DRE 15
✔
✔ (x2)
✔ (x2)
•option for pump and buffer tank
Features
• Cooling only version can be requested for
low leaving liquid temperatures 4 °C down to
-6 °C. This option must be specified at the
time of order
• All the versions can be requested with high
static pressure fans which allows nominal air
flow rates with higher static pressure installations. This option must be specified at time of
order. Please refer to the technical manuals
for technical data
• The versions with pump and/or buffer tank
are also fitted with automatic air vent valve,
filling point, expansion tank and water pressure relief valve
• High efficiency scroll compressors with low
power input
• Modulating microprocessor control system
• Functional parameters can be displayed in 4
languages
• Simplified remote control panel. Provides
access to all the unit basic control functions
and alarm notification
• Evaporator trace heating
• Compressor crank case heater
• Low pressure transducer (standard on heat
pump models)
• High pressure transducer (standard on heat
pump models and cooling only sizes 500 to
1000)
• Air discharge: top discharge for sizes 275 to
550 and front discharge for sizes 600 to 1000
(with top discharge on request)
• Centrifugal fans
• Compact size
• Metallic protective cabinet with anti-corrosion polyester paint
Accessories
• AVX: Spring anti-vibration mounts. Select the
AVX model by using the compatibility table.
• DR: Low temperature device, consisting of a
damper for installation on the fan outlet, modulates air flow to the condenser based on the
pressure transducer value. The DR 202 - 402
accessories also include the TP2 high pressure
transducers. Accessory obligatory in D versions.
reduction for single-circuit-units, 26% for
two-circuit-units, 22% for three-circuit-units).
Only available for 400V-3-phase power supply. Factory fitted only
day of the week.
184
✔ (x4)
play on the microprocessor controller of
working pressure (one per circuit). Standard
only.
on heat pump models and cooling only sizes
500 to 1000.
• VT: Anti-vibration mounts, set of four mounts
to be installed under the unit base.
versions available:
AERWEB300-6: Web server to monitor and remote • DUALCHILLER: Simplified control system to
switch on/off and control two chillers in a sincontrol maximum 6 units on RS485 network;
gle system (using Aermec GR3 command), as
remote control maximum 18 units on RS485 net• MULTICHILLER: Control system for multiple
work;
parallel installed constant flow chillers proAERWEB300-6G: Web server to monitor and
remote control maximum 6 units on RS485 netcapability.
• TP 1: Low pressure transducer, providing display of operating pressure (one per circuit).
Standard on heat pump models.
• TP 2: High pressure transducer, providing dis-
✔ (x2)
✔ (x2)
✔ (x2)
✔ (x2)
✔ (x4)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
62
62
62
82
63
63
64
64
64
64
64
74
84
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)***
✔ (x2)*** ✔ (x2)*** ✔ (x2)*** ✔ (x2)***
VT 14*
• Cooling only, heat pump and condensing unit
versions
• All versions manufactured with refrigerant
R407c
• Options for partial or total heat recovery
- With loose supplied water filter and differential pressure switch
- With pump only
- With low head pump assembly, 500 litre
buffer tank (700 litres for sizes 800 to 1000)
with 300 W anti-freeze heater (2 x 300 W for
sizes 750 to 1000), water filter fitted, and
flow switch
- With high head pump assembly, 500 litre
buffer tank (700 litres for sizes 800 to 1000)
with 300 W anti-freeze heater (2 x 300 W for
sizes 750 to 1000), water filter fitted, and
flow switch
✔ (x4)
DRE 25
•standard version
•option for pump
✔ (x4)
✔
✔
DRE 10
DRE 30
PGS
RIF
AERWEB300
TP 1
TP 2
✔
✔
DRE 325
EUROVENT programme:
LCP / A / P / C The products involved
can be found at the website www .
eurovent-certification. com
✔
✔
VT 16*
✔
✔
✔
✔
✔
✔
✔
VT 17
VT 2
✔
✔
✔
✔
✔
DR = Accessory obligatory for D versions.
* = To be used in versions with buffer tank.
** = To be used in heat pump models.
*** = Standard on heat pump models.
N.B. = number in brackets indicates required quantity.
Unit Configurator
requirements.
1 2 3
4 5 6 7
8
9
10
11
12
13
14
15 16
||||||||||
Code
|
Field of use
|
Heat recovery
|
Coil
|
Power supply
|
|||||
Size
Model
Version
EvaporatorIntegrated hydronic module
Code:
NRC
Size:
0275, 0300, 0325, 0350, 0500, 0550
0600, 0650, 0700, 0750, 0800, 0900, 1000
Field of use:
° -Standard with leaving water above +4 °C
Y -Low temperature with leaving liquid down to -6 °C
Model:
° -Cooling only
H -Heat pump
Heat recovery:
D -With desuperheaters (partial heat recovery)
T -With total heat recovery
Version:
° -Standard
L -Low noise
Coil:
° -Aluminium
R -Copper
S -Tinned copper
V -Coated aluminium
Evaporator:
° -To PED regulations
G -To TÜV-D regulations (Germany)
C -Condensing unit (without evaporator)
Power supply:
° -400V 3~ 50Hz* with circuit breakers
05- single low head pump and buffer tank (with holes for immersion
heaters)
07- single high head pump and buffer tank (with holes for immersion
heaters)
Attention:
– standard options are shown by the symbol °
– the following options are not available for heat pump models: Y, T, L and C
* (400V 3N~ 50Hz sizes 275,300, 325, 350, 500, 550, 600, 650, 700, 750 / 400V 3~ 50Hz 800, 900, 1000)
185
Technical Data
Cooling capacity (kW)
Total input power (kW)
Input current (A)
Water flow rate (l/h)
Pressure drop (kPa)
Total air flow rate (m3/h)
 Sound pressure dB(A)
Compressors / circuits (n.)
Capacity steps (n.)
Fans (n.)
Fan speed (rpm)
Maximum current (A)
Starting current (A)
Vers.
°
L
°
L
°
L
°
L
°
L
°
L
°
L
Tutte
Tutte
Tutte
°
L
Tutte
°
L
275
300
325
350
500
51
59
67
76
89
46
54
62
70
81
22,0
26,1
29,4
32,3
37,6
22,7
26,3
29,7
33,1
40,0
40,3
46,5
51,3
57,5
68,1
40,5
45,8
50,7
57,7
68,7
8770 10150 11520 13070 15310
7910 9290 10660 12040 13930
37,0
32,2
31,6
43,0
27,6
30,3
27,0
27,1
36,5
22,6
16000 22000 22000 26000 27000
11000 15500 15500 18000 19000
53.0
53.0
54.0
56.0
56.0
49.0
49.0
50.0
52.0
52.0
2/2
2/2
2/2
2/2
3/2
2
2
2
2
3
2
2
2
2
2
630
570
570
590
600
540
500
520
500
510
54
63
71
80
93
153
161
165
208
219
152
158
163
206
217
550
97
89
40,4
43,0
72,1
73,3
16680
15310
22,4
19,0
27000
19000
56.0
52.0
3/2
3
2
600
510
99
223
221
600
120
110
52,0
47,5
93,4
82,8
20640
18920
32,0
27,2
45000
31500
58.0
54.0
4/2
4
3
600
520
131
207
205
650
136
126
58.0
54,0
101,5
91,9
23390
21670
28,3
24,2
45000
31500
58.0
54.0
4/2
4
3
600
520
143
215
212
700
156
142
65,5
62,0
117,0
107,4
26830
24420
36,5
30,5
50000
35000
59.0
55.0
4/2
4
3
580
500
164
267
266
Crank case electric heater (W)
Tutte
2x75
2x75
2x75
2x75
3x75
3x75
4x75
4x75
4x75
Anti-freeze heater (W)
Tutte
00-P1/P4
01/08
Tutte
°
L
°
L
300
M/2"
F/2"½
500
127
142
178
186
300
M/2"
F/2"½
500
127
138
173
180
300
M/2"
F/2"½
500
122
131
168
176
300
M/2"
F/2"½
500
104
119
154
164
300
M/2"
F/2"½
500
131
149
195
203
300
M/2"
F/2"½
500
126
143
193
203
300
M/2"
F/2"½
500
75
95
177
183
300
M/2"
F/2"½
500
90
110
163
168
300
M/2"
F/2"½
500
103
132
146
154
Heat pumps model
Cooling capacity
Total input power
Input current
Water flow rate
Pressure drop
Heating capacity
Total input power
Input current
Water flow rate
Pressure drop
Total air flow rate
 Sound pressure
Compressors / circuits
Capacity steps
Fans
Fan speed
Maximum current
Starting current
kW
kW
A
l/h
kPa
kW
kW
A
l/h
kPa
m3/h
dB (A)
n.
n.
n.
rpm
A
A
275 H 300 H
49
57
21,6
25,6
39,7
45,8
8430 9800
34,2
30,3
58
67
25,0
29,5
44,0
50,7
9980 11520
42,0
36,8
16000 22000
53.0
53.0
2/2
2/2
2
2
2
2
630
570
54
63
155
162
325 H
65
28,8
50,5
11180
32,5
77
33,0
56,1
13248
40,9
22000
54.0
2/2
2
2
570
71
168
350 H
74
31,7
56,7
12730
42,2
87
36,2
62,7
14960
51,7
26000
56.0
2/2
2
2
590
80
210
500 H
86
36,9
67,1
14790
25,4
101
42,5
74,4
17370
32,2
27000
56.0
3/2
3
2
600
93
222
550 H
94
39,6
71,0
16170
20,7
111
45,7
78,9
19090
26,5
27000
56.0
3/2
3
2
600
99
227
600 H
118
51,0
92,0
20300
30,5
136
57,5
101,9
23390
39,9
45000
58.0
4/2
4
3
600
131
213
650 H
134
56.5
99,8
23050
27,0
155
63,5
110,9
26660
40,0
45000
58.0
4/2
4
3
600
143
223
700 H
152
64,0
115,3
26140
34,8
175
71,5
127,4
30100
41,0
50000
59.0
4/2
4
3
580
164
275
Crank case electric heater
W
2x75
2x75
2x75
2x75
3x75
3x75
4x75
4x75
4x75
Anti-freeze heater
W
00-P1/P4
01/08
l
kPa
kPa
300
M/2"
F/2"½
500
137
180
300
M/2"
F/2"½
500
134
176
300
M/2"
F/2"½
500
126
170
300
M/2"
F/2"½
500
108
157
300
M/2"
F/2"½
500
146
196
300
M/2"
F/2"½
500
132
196
300
M/2"
F/2"½
500
80
180
300
M/2"
F/2"½
500
95
168
300
M/2"
F/2"½
500
115
152
Water connections (Ø) *
Buffer tank capacity (l)
Available head (kPa) - gr1**
Available head (kPa) - gr2**
Water connections (Ø) *
Available head - gr1**
Available head - gr2**
750
184
168
77,0
72,5
134,5
122,8
31650
28900
27,8
23,2
50000
35000
59.0
55.0
4/2
4
3
580
500
190
318
315
2x75
2x130
2x300
M/2"
F/2"½
500
37
75
105
130
800
214
194
90,0
83,0
153,7
138,1
36810
33370
35,6
29,6
60000
42000
60.0
56.0
4/2
4
4
650
580
225
337
334
750 H
178
76,0
133,5
30620
26,0
207
83,5
145,8
35600
31,0
50000
59.0
4/2
4
3
580
190
326
2x75
2x130
2x300
M/2"
F/2"½
500
55
115
800 H
204
89,5
153,7
35090
32,8
239
96,5
166,2
41110
45,2
60000
60.0
4/2
4
4
650
225
346
900
238
216
100,0
94,0
171,7
155,8
40940
37150
30,3
25,0
68000
47600
60.0
56.5
4/2
4
4
600
530
245
404
401
1000
264
238
112,5
104,5
193,2
173,4
45410
40940
30,6
25,0
68000
47600
60.0
56.5
4/2
4
4
700
600
277
424
419
186
-
Cooling
∆t = 5°C
-
NRC 275 - 550 with buffer tank
NRC 600 - 1000 without buffer tank
NRC 600 - 1000 with buffer tank
4x130 4x130 4x130
2x300 3x300 2x300
V3"
V3"
V3"
V3"
V3"
V3"
700
700
700
97
95
82
113
116
102
215
212
195
235
232
215
900 H
230
100,0
172,7
39560
28,0
267
108,0
186,5
45920
42,2
68000
60.0
4/2
4
4
600
245
414
1000 H
254
112,0
192,9
43690
28,3
295
119,5
206,9
50740
44,9
68000
60.0
4/2
4
4
700
277
435
4x130 4x130 4x130
2x300 2x300 2x300
V3"
V3"
V3"
V3"
V3"
V3"
700
700
700
105
102
88
225
222
204
* = M: male; F: female; V: Victaulic.
** = gr1 (Low head pump assembly); gr2 (High head pump assembly)
Performance values refer to the following
conditions:
e Sound pressure measured in free field
conditions at a distance of 10 m and
directivity factor = 2. In accordance with
ISO 3744.
- Power supply: 400 V
NRC 275 - 550 without buffer tank
Heating
∆t = 5°C
Model. NRC 00 (without buffer tank)
275
1763
2100
950
629
689
300
1793
2100
950
665
737
325
1793
2100
950
699
748
350
1763
2450
950
777
841
500
1963
2450
950
904
983
550
1963
2450
950
919
999
600
2288
3750
1100
1481
1593
650
2288
3750
1100
1498
1610
700
2288
4550
1100
1737
1831
750
2288
4550
1100
1918
2001
800
2295
4950
1300
2670
2797
900
2295
4950
1300
2700
2827
1000
2295
4950
1300
2960
3095
Model NRC P1/P4 (with pumping assembly)
275
A
mm
1763
B
mm
2100
C
mm
950
NRC
663
Weight (kg)
NRC H
723
300
1793
2100
950
699
771
325
1793
2100
950
733
782
350
1763
2450
950
811
875
500
1963
2450
950
938
1017
550
1963
2450
950
953
1033
600
2288
3750
1100
1659
1771
650
2288
3750
1100
1676
1788
700
2288
4550
1100
1914
2009
750
2288
4550
1100
2096
2179
800
2295
4950
1300
2870
2997
900
2295
4950
1300
2900
3027
1000
2295
4950
1300
3160
3295
Mod. NRC 01/08 (with buffer tank unit and pump)
275
300
A
mm
1763 1793
B
mm
2950 2950
C
mm
950
950
NRC
827
891
Weight (kg)
NRC H
865
920
325
1793
2950
950
901
930
350
1763
3300
950
996
1030
500
1963
3300
950
1121
1194
550
1963
3300
950
1138
1210
600
2288
4550
1100
1743
1855
650
2288
4550
1100
1760
1872
700
2288
5350
1100
1998
2093
750
2288
5350
1100
2180
2263
800
2295
5750
1300
3070
3190
900
2295
5750
1300
3100
3220
1000
2295
5750
1300
3350
3482
A
B
C
Weight (kg)
mm
mm
mm
NRC
NRC H
Note: the weights given for the versions with buffer tank refer to the empty weight.
Aermec S.p.A.
Via Roma, 996 - 37040 Bevilacqua (VR) -
187
Cod.: SNRCUY.13 / 1007
Cooling only models
Dimensions (mm)
NS
Air cooled chillers with axial fans and twin-rotor screw compressor
R134a
Mod. NS
AER485P1
MULTICHILLER
AK-ACUSTIC KIT (*)
PRV3
AERWEB300
Mod. NS
AER485P1
MULTICHILLER
AK-ACUSTIC KIT (*)
PRV3
AERWEB300
Mod. NS °/L (*)
GP 300M (2)
GP 400M (2)
GP 300B (2)
GP 400B (2)
GP 500B (2)
GP 300M+300M (2)
KRS
KRSDES(***)
KRSREC(***)
1251
4(x1)
1401
4(x1)
1601
4(x1)
1801
4(x1)
2101
4(x1)
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3202
3402
3602
3902
4202
2401
1402
1602
4(x1)
4(x2)
4(x2)
4
4
4
4
4502
4
4
4
4
4802
4
4
4
4
5002
1802
4(x2)
4
4
4
4
5202
2002
4(x2)
4
4
4
4
5402
2202
4(x2)
4
4
4
4
5702
2352
4(x2)
4
4
4
4
6003
2502
4(x2)
4
4
4
4
6303
2652
4(x2)
4
4
4
4
6603
2802
4(x2)
4
4
4
4
6903
3002
4(x2)
4
4
4
4
7203
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x2)
4
4
4
4
4(x3)
4
4
4
4
4(x3)
4
4
4
4
4(x3)
4
4
4
4
4(x3)
4
4
4
4
4(x3)
4
4
4
4
1251
1401
1601
1801
2101
2401
1402
1602
1802
2002
2202
2352
2502
2652
2802
3002
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
KRS10
KRS10
KRS10
KRS10
KRS11
KRS11
KRS10
KRS10
KRS10
KRS10
KRS10
KRS10
KRS10
KRS11
KRS11
KRS12
KRS10DES KRS10DES KRS10DES KRS10DES KRS11DES KRS11DES KRS18DES KRS18DES KRS18DES KRS18DES KRS18DES KRS18DES KRS18DES KRS19DES KRS19DES KRS12DES
KRS10REC KRS10REC KRS10REC KRS10REC KRS11REC KRS11REC KRS10REC KRS10REC KRS10REC KRS10REC KRS10REC KRS10REC KRS10REC KRS11REC KRS11REC KRS12REC
Mod. NS °/L (*)
3202
3402
3602
3902
4202
4502
4802
5002
5202
5402
5702
6003
6303
6603
6903
7203
4
4
GP 300M+300M
4
4
4
GP 300M+400M
4
4
GP 400M+400M
GP 400M+500M
4
4
4
4
GP 500M+500M
4
GP 300M+300M+400M
4
4
GP 300M+400M+400M
4
4
GP 400M+400M+400M
KRS12
KRS12
KRS12
KRS13
KRS13
KRS14
KRS14
KRS14
KRS14
KRS14
KRS14
KRS15
KRS16
KRS16
KRS17
KRS17
KRS
KRSDES(***)
KRSREC(***)
Characteristics
• Cooling only version
• Manufactured with refrigerant R134a
• Options for partial or total heat recovery
• High efficiency, low noise screw compressors
with modulating capacity control from 40 to
100%. (25 to 100% with electronic expansion valve option)
• Pump assembly option (see Unit
Configurator) that includes:
- single pump, or one run plus one standby
pump
- two 25 litre expansion tanks.
• Standard Version (°):
- Operating limit up to 42 °C external air
temperature - Compressor acoustical enclosure for
low noise operation.
• Version L:
-
Operating limit up to 42 °C external air
temperature
- Compressor acoustical enclosure for
low noise operation
- Fan speed control
- Hot gas discharge muffler.
• High efficiency Version A:
- Operating limit up to 48 °C external air
temperature
low noise operation.
• High efficiency Version E:
- Operating limit up to 48 °C (46 °C for
sizes 5402 to 5702) external air temper-
ature
low noise operation
- Fan speed control
- Hot gas discharge muffler.
• Modulating capacity control microprocessor system
• Multilingual display panel
• Shell and tube evaporator optimised for
refrigerant R134a
• Axial fans for extremely quiet operation
• Compact sizes
• Metal control panel with anti-corrosion polyester paint
Accessories
• AVX: Spring anti-vibration mounts. For compatibility of the AVX mounts refer to the technical manual.
• DCPX: Low ambient device for cooling operation below 19 °C down to -10 °C. Standard
for Versions D, L, and E.
• KRS: Evaporator trace heating. Factory fitted
only.
• KRSDES/KRSREC: Evaporator and heat recovery exchangers trace heating. Factory fitted
only.
• GP: Protective grille. Condenser coil external
protection against accidental or hail damage.
Factory fitted.
• PRV3: Remote control of the chiller operat-
188
ing functions.
• RIFNS: Power factor correction. Connected in
only. For compatibility of the RIF device refer
to the technical manual.
• AK: AcOustic kit (only for Versions L and
E).
This accessory allows further sound reduction. Must be requested at time of order and
is available factory fitted only.
capability.
Mod. NS A/E (*)
GP 300M
GP 400M
GP 500M
GP 300B
GP 400B
GP 500B
GP 300M+300M
KRS
KRSDES(***)
KRSREC(***)
1251
1401
1601
4
4
4
1801
2101
2401
4
4
1402
1602
4
4
1802
2002
2202
2352
2502
2652
2802
4
4
4
4
4
4
3002
4
4
4
KRS10
KRS10
KRS11
KRS10
KRS11
KRS11
KRS11
KRS11
KRS10
KRS10
KRS11
KRS11
KRS11
KRS11
KRS11
KRS13
Mod. NS A/E (*)
3202
3402
3602
3902
4202
4502
4802
5002
5202
5402
5702
6003
6303
6603
6903
7203
GP 300M+300M
4
GP 300M+400M
4
GP 400M+400M
4
GP 400M+500M
4
4
GP 500M+500M
4
4
4
4
4
4
GP 400M+400M+500M
4
GP 400M+500M+500M
4
4
GP 500M+500M+500M
4
4
KRS14
KRS13
KRS12
KRS13
KRS13
KRS14
KRS14
KRS14
KRS14
KRS14
KRS14
KRS15
KRS16
KRS16
KRS17
KRS17
KRS
KRSDES(***)
KRSREC(***)
Mod. NS °/L
AVX
RIFNS
Mod. NS °/L
AVX
RIFNS
1251
502
1251
3202
509
3202
1401
502
1401
3402
509
3402
1601
502
1601
3602
507
3602
1801
501
1801
3902
508
3902
2101
506
2101
4202
508
4202
2401
506
2401
4502
516
4502
1402
502
1402
4802
516
4802
1602
502
1602
5002
532
5002
1802
503
1802
5202
533
5202
2002
504
2002
5402
533
5402
2202
505
2202
5702
534
5702
2352
505
2352
6003
517
6003
2502
505
2502
6303
515
6303
2652
511
2602
6603
515
6603
2802
511
2802
6903
523
6903
3002
509
3002
7203
523
7203
Mod. NS A/E
AVX
RIFNS
Mod. NS A/E
AVX
RIFNS
1251
502
1251
3202
509
3202
1401
502
1401
3402
513
3402
1601
502
1601
3602
516
3602
1801
506
1801
3902
519
3902
2101
510
2101
4202
519
4202
2401
510
2401
4502
521
4502
1402
503
1402
4802
521
4802
1602
503
1602
5002
535
5002
1802
504
1802
5202
535
5202
2002
511
2002
5402
535
5402
2202
511
2202
5702
535
5702
2352
511
2352
6003
526
6003
2502
511
2502
6303
528
6303
2652
511
2602
6603
528
6603
2802
511
2802
6903
531
6903
3002
509
3002
7203
531
7203
Note:
(*) Accessory only factory fitted
(**) Accessory supplied as standard on Versions L, E, and D
The number in brackets e.g. (x3) indicates the quantity.
(***) Accessory KRSDES/KRSREC includes evaporator and heat recovery
exchangers trace heating
189
Mod. NS °
DCPX (**)
Mod. NS °
DCPX (**)
1251
65(x1)
3202
68(x1)
1401
65(x1)
3402
68(x1)
1601
65(x1)
3602
68(x1)
1801
65(x1)
3902
72(x1)
2101
69(x1)
4202
72(x1)
compatibility DCPX
2401
1402
1602
69(x1) 69(x1) 68(x1)
4502
4802
5002
73(x1) 73(x1) 73(x1)
1802
68(x1)
5202
73(x1)
2002
68(x1)
5402
73(x1)
2202
68(x1)
5702
73(x1)
2352
68(x1)
6003
68+76
2502
68(x1)
6303
72+76
2652
68(x1)
6603
72+76
2802
68(x1)
6903
73+76
3002
68(x1)
7203
73+76
Mod. NS A
DCPX (**)
Mod. NS A
DCPX (**)
1251
65(x1)
3202
68(x1)
1401
65(x1)
3402
72(x1)
1601
65(x1)
3602
73(x1)
1801
69(x1)
3902
73(x1)
2101
69(x1)
4202
73(x1)
2401
69(x1)
4502
73(x1)
1802
68(x1)
5202
73(x1)
2002
68(x1)
5402
73(x1)
2202
68(x1)
5702
73(x1)
2352
68(x1)
6003
73+76
2502
68(x1)
6303
73+76
2652
68(x1)
6603
73+76
2802
68(x1)
6903
73+76
3002
68(x1)
7203
73+76
1402
68(x1)
4802
73(x1)
1602
68(x1)
5002
73(x1)
Technical Data
Mod. NS
U.M.
Cooling capacity
kW
Total input power
kW
DCPX VERSION WITH HIGH STATIC PRESSURE FANS
Mod. NS °
Mod. NS °
Mod. NS A
Mod. NS A
1251
69(x1)
3202
73(x1)
1401
69(x1)
3402
73(x1)
1601
69(x1)
3602
73(x1)
1801
69(x1)
3902
73(x1)
2101
69(x1)
4202
73(x1)
2401
69(x1)
4502
73(x1)
1402
68(x1)
4802
73(x1)
1602
68(x1)
5002
73(x1)
1802
68(x1)
5202
73(x1)
2002
68(x1)
5402
74(x1)
2202
68(x1)
5702
75(x1)
2352
68(x1)
6003
73+76
2502
68(x1)
6303
73+76
2652
68(x1)
6603
73+76
2802
68(x1)
6903
73+76
3002
73(x1)
7203
73+76
Water flow rate
l/h
1251
69(x1)
3202
73(x1)
1401
69(x1)
3402
73(x1)
1601
69(x1)
3602
73(x1)
1801
69(x1)
3902
74(x1)
2101
70(x1)
4202
74(x1)
2401
70(x1)
4502
75(x1)
1402
68(x1)
4802
75(x1)
1602
68(x1)
5002
75(x1)
1802
68(x1)
5202
75(x1)
2002
73(x1)
5402
75(x1)
2202
73(x1)
5702
75(x1)
2352
73(x1)
6003
73+77
2502
73(x1)
6303
74+77
2652
73(x1)
6603
74+77
2802
73(x1)
6903
75+77
3002
73(x1)
7203
75+77
Pressure drop
kPa
Note:
(*) Accessory only factory fitted
(**) Accessory supplied as standard on Versions L, E, and D
The number in brackets e.g. (x3) indicates the quantity.
EER
W/W
ESEER
Unit Configurator
requirements.
12
3 4 5 6
7
8
9
10
11
12
13
14 15
||||||||||
Code
| Expansion device |
Heat recovery
|
Condenser coil
|
Power supply
|
|||||
Size ModelVersion Fan Pump
Code:
NS
Size:
1251, 1401, 1601, 1801, 2101, 2401, 1402, 1602, 1802, 2002, 2202
2352, 2502, 2652, 2802,3002, 3202,3402, 3602, 3902,4202,4502,
4802, 5002, 5202, 5402, 5702, 6003, 6303, 6603, 6903, 7203
Expansion device:
°- R134a thermostatic expansion valve, minimum leaving water
temperature down to +4°C
Y- R134a thermostatic expansion valve, minimum leaving liquid temperature
down to -6 °C
X- R134a electronic expansion valve, minimum leaving liquid temperature
down to -6 °C
Model:
° - Cooling only, heat exchanger to PED regulations
C - Condensing unit
Heat recovery:
D - With desuperheaters (partial heat recovery)
Version:
° - Standard
L - Standard low noise version
A - High efficiency
Condenser coil:
° - Aluminium
R - Copper
S - Tinned copper
V - Anti-corrosion coated aluminium
Fan:
° - Standard
J - Inverter
Power supply:
° - 400V 3~ 50Hz with fuses
2 - 230V 3~ 50Hz with fuses *
4 - 230V 3~ 50Hz with circuit breakers *
* (not available for sizes: 1251~2401, 2352~7203)
5 - 500V 3~ 50Hz with fuses **
9 - 500V 3~ 50Hz with circuit breakers **
** (not available for sizes: 1801~2401, 3402~7203)
Pump:
00- Without pump assembly
PA- Pump assembly (Pump A)
PB- Pump assembly (Pump A and standby pump)
PC- Pump assembly (Pump C)
PD- Pump assembly (Pump C and standby pump)
PE- Pump assembly (Pump E)
PF- Pump assembly (Pump E and standby pump)
PG- Pump assembly (Pump G)
PH- Pump assembly (Pump G and standby pump)
PJ - Pump assembly (Pump J)
PK- Pump assembly (Pump J and standby pump)
Attention:
– 500V 3~50Hz power supply is compatible only with high static
pressure fans option (M)
– sizes 5002-5202-5402-5702 are available only with electronic expansion
valve (X)
breakers, and pump assembly with only pump A.
Since each option is uniquely identified it is not neccessary to indicate
the standard options (represented by °) in the unit configurator.
Total input current
A
Maximum current (LRA)
A
Starting current (FLA)
A
Compressors
n°
Fan air flow rate
(m3/h)
Number of fans
 Sound power
dB(A)
 Sound pressure
dB(A)
Vers.
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°-L
A-E
°-L
A-E
All
°
L
A
E
°-L
A-E
°
L
A
E
°
L
A
E
1251
259
238
276
252
91
97
88
90
44550
40940
47470
43340
42
35
45
38
2,85
2,45
3,14
2,80
3,81
3,70
4,22
4,09
159
162
154
152
236
236
381
381
1
116000
82000
110000
70000
6
6
94
86
94
86
62
54
62
54
1401
294
265
314
291
108
113
97
101
50570
45580
54010
50050
44
36
39
33
2,72
2,34
3,24
2,88
3,75
3,64
4,24
4,11
187
192
172
170
236
236
425
425
1
116000
82000
106000
74000
6
6
95
87
95
87
63
55
63
55
Power supply = 400V 3~ 50Hz.
e Aermec determines the value of sound power on the basis of
measurements made in accordance with ISO 9614-2, as required for
eeSound pressure measured in free field over a reflective plane
(directivity factor Q=2) at a distance of 10 metres from the outer
surface of the unit, in accordance with ISO 3744.
1601
336
308
347
330
117
124
104
109
57790
52980
59680
56760
45
38
25
23
2,87
2,48
3,34
3,03
3,70
3,59
4,30
4,17
197
206
181
182
236
236
425
425
1
110000
82000
106000
81500
6
6
97
89
97
89
65
57
65
57
-
-
-
-
1801
385
361
420
391
145
150
134
140
66220
62090
72240
67250
58
51
45
39
2,66
2,41
3,13
2,79
3,73
3,62
4,24
4,11
238
244
222
225
331
338
486
493
1
110000
82000
136000
94000
6
8
97
89
97
89
65
57
65
57
2101
443
412
466
432
166
170
150
155
76200
70860
80150
74300
37
32
38
33
2,67
2,42
3,11
2,79
3,78
3,67
4,20
4,07
280
284
256
255
348
355
614
621
1
150000
110000
180000
113000
8
10
98
90
98
90
66
58
66
58
2401
493
454
533
497
180
185
165
172
84800
78090
91680
85480
43
36
47
41
2,75
2,45
3,23
2,89
3,76
3,65
4,28
4,15
301
307
279
283
388
395
678
685
1
145000
104000
174000
118000
8
10
98
90
98
90
66
58
66
58
1402
282
259
304
273
102
106
97
101
48500
44550
52290
46960
39
33
30
24
2,77
2,44
3,13
2,70
3,88
3,76
4,20
4,07
177
180
171
170
269
269
245
245
2
116000
82000
106000
74000
6
6
96
88
96
88
64
56
64
56
1602
317
287
345
314
121
125
109
115
54520
49360
59340
54010
47
39
39
32
2,62
2,29
3,17
2,73
3,72
3,61
4,22
4,09
207
212
190
194
309
309
283
283
2
116000
82000
106000
77000
6
6
97
89
97
89
65
57
65
57
Cooling:
∆t = 5 K.
Example of the configuration fields: NS1401LR8PA
This is an NS unit with of size 1401, standard low noise version, with
copper condenser coil, power supply 400V 3~ 50Hz with circuit
190
191
Technical Data
Technical Data
Mod. NS
U.M.
Cooling capacity
kW
Total input power
kW
Water flow rate
l/h
Pressure drop
kPa
EER
W/W
ESEER
Total input current
A
A
A
Compressors
Fan air flow rate
n°
(m3/h)
Number of fans
 Sound power
dB(A)
dB(A)
Vers.
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)-L
A-E
(°)-L
A-E
All
(°)
L
A
E
(°)-L
A-E
(°)
L
A
E
(°)
L
A
E
1802
358
325
397
364
138
142
127
130
61580
55900
68280
62610
53
44
35
29
2,59
2,28
3,13
2,80
3,69
3,58
4,20
4,07
218
221
215
214
345
352
325
332
2
110000
82000
144000
96000
6
8
97
89
97
89
65
57
65
57
2002
404
372
450
410
154
160
144
150
69490
63980
77400
70520
36
31
44
37
2,62
2,32
3,13
2,73
3,59
3,48
4,23
4,10
261
266
248
247
372
379
403
410
2
145000
104000
187500
124500
8
10
98
90
98
90
66
58
66
58
192
2202
450
420
495
453
171
181
157
161
77400
72240
85140
77920
40
35
39
33
2,63
2,33
3,15
2,81
3,56
3,45
4,24
4,11
295
301
274
277
392
399
420
427
2
145000
104000
180000
120000
8
10
98
90
98
90
66
58
66
58
-
-
-
-
2352
486
443
519
478
177
185
166
171
83590
76200
89270
82220
48
40
42
36
2,74
2,39
3,13
2,80
3,82
3,71
4,23
4,10
306
310
288
290
425
432
480
487
2
145000
104000
176500
123000
8
10
97
90
97
90
65
58
65
58
2502
503
459
543
503
187
198
173
181
86520
78950
93400
86520
50
42
46
39
2,70
2,32
3,14
2,78
3,81
3,70
4,25
4,12
322
333
301
303
458
465
507
514
2
145000
104000
173000
126000
8
10
98
90
98
90
66
58
66
58
2652
541
495
577
539
202
211
182
192
93050
85140
99240
92710
47
39
48
42
2,68
2,34
3,17
2,81
3,73
3,62
4,25
4,12
347
354
320
320
458
465
551
558
2
152000
108000
173000
130000
8
10
98
90
98
90
66
59
66
58
Cooling:
∆t = 5 K.
2802
578
530
*612
574
216
230
197
207
99420
91160
105260
98730
53
45
55
48
2,67
2,30
3,11
2,77
3,78
3,67
4,21
4,08
371
381
339
344
458
465
553
560
2
152000
108000
173000
136000
8
10
98
91
98
91
66
59
66
59
3002
*629
573
*661
*622
225
237
201
210
108190
98560
113690
106980
44
37
32
28
2,79
2,41
3,29
2,96
3,68
3,57
4,28
4,15
384
398
353
352
472
472
567
567
2
226000
164000
212000
155500
12
12
99
90
99
90
66
57
66
57
Mod. NS
U.M.
Cooling capacity
kW
Total input power
kW
Water flow rate
l/h
Pressure drop
kPa
EER
W/W
ESEER
Total input current
A
A
A
Compressors
n°
Fan air flow rate
(m3/h)
Number of fans
 Sound power
dB(A)
dB(A)
Vers.
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)-L
A-E
(°)-L
A-E
All
(°)
L
A
E
(°)-L
A-E
(°)
L
A
E
(°)
L
A
E
*3202
671
616
695
660
235
248
208
218
115410
105950
119540
113520
38
32
25
23
2,86
2,48
3,34
3,03
3,68
3,57
4,30
4,17
394
411
362
364
472
472
567
567
2
220000
164000
212000
163000
12
12
99
91
99
91
66
58
66
58
*3402
721
669
767
721
262
274
238
249
124010
115070
131920
124010
50
43
35
31
2,75
2,44
3,22
2,90
3,68
3,57
4,26
4,13
435
450
403
407
567
574
628
635
2
220000
164000
242000
175500
12
14
99
91
99
91
66
58
66
58
*3602
771
722
839
782
290
300
268
280
132610
124180
144310
134500
58
51
45
39
2,66
2,41
3,13
2,79
3,68
3,57
4,19
4,06
477
488
444
450
662
676
654
661
2
220000
164000
272000
188000
12
16
99
92
99
92
66
59
66
59
-
-
-
-
*3902
828
773
885
822
311
320
284
295
142420
132960
152220
141380
46
40
41
35
2,66
2,42
3,12
2,79
3,73
3,62
4,18
4,05
519
527
478
480
679
693
778
792
2
260000
192000
316000
207000
14
18
100
92
100
92
67
59
67
59
*4202
879
815
953
888
324
335
298
312
151190
140180
163920
152740
50
43
46
40
2,71
2,43
3,20
2,85
3,73
3,62
4,24
4,11
540
551
501
508
719
733
825
839
2
255000
186000
310000
212000
14
18
100
92
100
92
67
59
67
59
*4502
936
866
999
928
345
355
314
327
160990
148950
171830
159620
40
34
43
37
2,71
2,44
3,18
2,84
3,73
3,62
4,17
4,04
582
591
535
538
736
750
900
914
2
295000
214000
354000
231000
16
20
100
92
100
92
67
59
67
59
*4802
987
907
1066
994
359
370
329
344
169760
156000
183350
170970
43
36
47
41
2,75
2,45
3,24
2,89
3,67
3,56
4,17
4,04
603
613
558
566
776
790
900
914
2
290000
208000
348000
236000
16
20
100
92
100
92
67
59
67
59
*5002
1063
984
1155
1088
390
405
360
376
182838
169250
198662
187138
40
34
42
37
2,73
2,43
3,21
2,89
3,71
3,60
4,25
4,12
648
670
614
626
866
880
1051
1065
2
297000
212000
346000
254000
16
20
101
93
101
93
68
60
68
60
Cooling:
∆t = 5 K.
191
Dimensions (mm)
Mod. NS
U.M.
Cooling capacity
kW
Total input power
kW
Water flow rate
l/h
Pressure drop
kPa
EER
W/W
ESEER
Total input current
A
A
A
Compressors
Fan air flow rate
n°
(m3/h)
Number of fans
 Sound power
dB
dB
Vers.
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)
L
A
E
(°)-L
A-E
(°)-L
A-E
All
(°)
L
A
E
(°)-L
A-E
(°)
L
A
E
(°)
L
A
E
5202
1140
1060
1244
1160
420
440
390
407
196082
182322
213970
199522
36
31
37
32
2,71
2,41
3,19
2,85
3,71
3,60
4,26
4,13
693
726
655
670
924
938
1109
1123
2
304000
216000
346000
272000
16
20
101
93
101
93
68
60
68
60
5402
1185
1105
1287
1198
432
454
408
426
203822
190062
221366
206058
39
34
39
34
2,74
2,44
3,15
2,82
3,69
3,58
4,20
4,07
715
750
685
700
968
975
1228
1235
2
324000
240000
346000
283500
18
20
101
93
101
93
68
60
68
60
5702
1230
1150
1330
1236
444
467
426
444
211562
197802
228763
212594
42
37
42
36
2,77
2,46
3,12
2,78
3,69
3,58
4,15
4,03
736
774
715
735
1012
1012
1227
1227
2
360000
267000
346000
295000
20
20
101
93
101
93
68
60
68
60
-
-
-
-
6003
1264
1176
1372
1278
469
485
432
452
217410
202270
235980
219820
53
46
45
39
2,69
2,43
3,18
2,83
3,76
3,65
4,28
4,15
778
795
723
733
1050
1071
1013
1034
3
365000
268000
446000
306000
20
26
101
93
101
93
68
60
68
60
6303
1321
1227
1419
1319
490
505
448
467
227210
211040
244070
226870
46
40
43
37
2,69
2,43
3,17
2,82
3,78
3,67
4,25
4,12
820
834
757
763
1067
1088
1072
1093
3
405000
296000
490000
325000
22
28
101
93
101
93
68
60
68
60
Cooling:
∆t = 5 K.
6603
1372
1268
1486
1384
504
520
463
484
235980
218100
255589
238050
48
41
46
40
2,72
2,44
3,21
2,86
3,76
3,65
4,28
4,15
841
858
780
791
1107
1128
1064
1085
3
400000
290000
484000
330000
22
28
101
93
101
93
68
60
68
60
6903
1430
1319
1532
1425
525
540
479
499
245960
226870
263500
245100
41
35
44
38
2,72
2,44
3,20
2,86
3,81
3,70
4,29
4,16
883
898
814
821
1124
1145
1122
1143
3
440000
318000
528000
349000
24
30
102
93
102
93
69
60
68
59
7203
1480
1361
1600
1490
539
555
494
516
254560
234090
275200
256280
43
36
47
41
2,75
2,45
3,24
2,89
3,76
3,65
4,28
4,15
904
921
837
849
1164
1185
1122
1143
3
435000
312000
522000
354000
24
30
102
94
102
94
68
61
68
60
Mod. NS
Height
Width
(A)
(B)
Length
(C)
Weight empty
kg
Mod. NS
Height
Width
(A)
(B)
Length
(C)
Weight empty
kg
Mod. NS
Height
Width
(A)
(B)
Length
(C)
Weight empty
kg
Mod. NS
Height
Width
(A)
(B)
Length
(C)
Weight empty
kg
Version
All
All
°/L
A/E
°/L
A/E
Version
All
All
°/L
A/E
°/L
A/E
Version
All
All
°/L
A/E
°/L
A/E
Version
All
All
°/L
A/E
°/L
A/E
1251
2450
2200
3780
3780
2910
3050
1802
2450
2200
3780
4770
3460
3900
3202
2450
2200
7160
7160
6270
6520
5202
2450
2200
11100
11100
10100
10750
1401
2450
2200
3780
3780
3060
3230
2002
2450
2200
4770
5750
4270
4700
3402
2450
2200
7160
8150
6770
7540
5402
2450
2200
11100
11100
10200
10800
For transport reasons Versions A and E, sizes 6003 to 7203, are
shipped separated; one module consisting of two compressors and
standard electrical panel (placed in front of the unit) and one module
with one compressor and the electrical panel placed on the
1601
2450
2200
3780
3780
3150
3250
2202
2450
2200
4770
5750
4740
5270
3602
2450
2200
7160
9140
7280
8610
5702
2450
2200
11100
11100
10350
10850
1801
2450
2200
3780
4770
3650
4330
2352
2450
2200
4770
5750
4800
5390
3902
2450
2200
8150
10120
7830
9180
6003
2450
2200
11530
14490
11390
13760
2101
2450
2.200
4770
5750
4230
4920
2502
2450
2200
4770
5750
4900
5500
4202
2450
2200
8150
10120
8180
9410
6303
2450
2200
12520
15470
12210
14330
2401
2450
2200
4770
5750
4570
5150
2652
2450
2200
5750
5750
5320
5510
4502
2450
2200
9140
11100
8750
9820
6603
2450
2200
12520
15470
12250
14560
1402
2450
2200
3780
3780
3250
3420
2802
2450
2200
5750
5750
5330
5520
4802
2450
2200
9140
11100
9090
10200
6903
2450
2200
13510
16450
13230
14970
1602
2450
2200
3780
3780
3270
3560
3002
2450
2200
7160
7160
6180
6450
5002
2450
2200
10120
11100
9360
10450
7203
2450
2200
13510
16450
13570
15350
compressor side beneath the condenser coil. On the site it is only
necessary to connect the two sections electrically. For more
information refer to the technical and/or installation manual.
Cod.: SNSUY.03 / 1112
Technical Data
NSH
Air cooled heat pumps with axial fans and twin-rotor screw compressor
Cooling capacity from 236 to 732 kW, heating capacity from 275 to 812 kW
Mod. NSH
AER485P1
MULTICHILLER
AK-ACUSTIC KIT (1)
PRV3
AERWEB300
Mod. NSH
KRS (1)
KRSDES (1)(2)
Mod. NSH
RIFNSH
Mod. NSH
GP300M (1)
GP400M (1)
GP300B (1)
GP400B (1)
GP500B (1)
Mod.NSH
DCPX(3)(4)
Mod.NSH(version ° - L)
AVX (00)
AVX (PA)
AVX (PC)
AVX (PE)
AVX (PG)
AVX (PJ)
Mod.NSH(version A - E)
AVX (00)
AVX (PA)
AVX (PC)
AVX (PE)
AVX (PG)
AVX (PJ)
AERMEC
partecipates in the EUROVENT
programme for:LCP/A/P/R
up to 600 kW
Check ongoing validity of
certificate online:
1251
✔(x1)
✔
✔
✔
✔
1251
KRS11
KRS11DES
1251
1251
1251
✔
1401
✔(x1)
✔
✔
✔
✔
1401
KRS11
KRS11DES
1401
1401
1401
✔
1601
✔(x1)
✔
✔
✔
✔
1601
KRS11
KRS11DES
1601
1601
1601
✔
1801
✔(x1)
✔
✔
✔
✔
1801
KRS11
KRS11DES
1801
1801
1801
1402
✔(x2)
✔
✔
✔
✔
1402
KRS19
KRS19DES
1402
1402
1402
1602
✔(x2)
✔
✔
✔
✔
1602
KRS19
KRS19DES
1602
1602
1602
✔
✔
1802
✔(x2)
✔
✔
✔
✔
1802
KRS19
KRS19DES
1802
1802
1802
2002
✔(x2)
✔
✔
✔
✔
2002
KRS19
KRS19DES
2002
2002
2002
✔
✔
1251
DCPX69
1251
536
536
536
536
536
536
1251
536
536
536
536
536
536
1401
DCPX69
1401
536
536
536
536
536
536
1401
536
536
536
536
536
536
1601
DCPX69
1601
536
536
536
536
536
536
1601
536
536
536
536
536
536
1801
DCPX69
1801
539
539
540
540
540
540
1801
540
540
540
540
540
540
1402
DCPX68
1402
537
537
537
537
538
538
1402
537
537
538
538
538
538
1602
DCPX68
1602
538
538
538
538
538
538
1602
538
538
538
538
538
538
1802
DCPX68
1802
541
541
541
541
541
541
1802
541
541
541
541
541
541
✔
2002
DCPX73
2002
542
543
543
543
543
543
2002
543
543
543
543
543
543
Accessories available for all versions
(1)Accessory only factory fitted
(2)Accessory KRSDES includes evaporator and desuperheater heat exchangers trace heating
(3) Standard for low noise Versions(L/E) and with desuperheater(D)
(4)Fans Inverter (J): DCPX not necessary. Fans are already equipped with speed controller
Characteristics
• R134a refrigerant
• High efficiency both in cooling and heating
mode, and also at part load
• Compact sizes
• Screw compressors with 40-100% modulating capacity control, with acoustical enclosure as a standard
• Shell and tube heat exchanger optimised as
either evaporator or condenser
• Electronic expansion valve as a standard
• Economiser circuit with plate heat exchanger
for improved performance, particularly at
high compression ratios, as experienced in
heating mode at low ambients
• Generously sized refrigerant circuit for minimum pressure drop
• Modulating capacity control microprocessor system with multilingual display panel
• Extremely robust construction with anti-corrosion polyester paint
• Extensive choice of models and versions
- 17 sizes (4 single, 13 double circuit)
- 4 versions: standard [°], low noise[L], high
efficiency [A], low noise high efficiency [E]
- Partial heat recovery option (desuperheater)
- Pump assembly option (single pump and
expansion vessel)
- Inverter fans with high static pressure option
- Condenser coil with aluminium, coated aluminium, copper or tinned copper fins
• Wide operating limits
- Maximum leaving water temperature in heating mode 55°C
- Maximum external air temperature in cooling
mode 48° C for high efficiency versions, 44°
C for standard versions
- Minimum external temperature in heating
mode -7° C for high efficiency versions, -3° C
for standard versions
- Ability to exceed operating limits with a
reduction of capacity using an intelligent
algorithm that avoids a fault trip-out
- Low sound level
- Low noise axial fans with aerodynamic profile blades
- Acoustical compressor enclosure as standard
- For low noise versions:
- Hot gas discharge muffler
- Reduced fan speed by means of phase-cut
controller (DCPX)
- Optional acoustic kit AK, including enhanced
soundproofing enclosures and additional
insulation
Accessories
ing functions.
remote control max. 6 units in RS485 netsystems with MODBUS protocol.
• RIFNSH: Power factor correction. Connected in
• AVX: Spring anti-vibration mounts. For comparallel to the motor allowing about 10%
patibility of the AVX mounts refer to the techreduction of input current. Must be requested
remote control max. 18 units in RS485 netnical manual.
• DCPX: Electronic controller that varies fan
only. For compatibility of the RIF device refer •AK: AcOustic kit (only for Versions
speed based on condensing pressure. Low
HL-HE).
ambient device for cooling operation below • AERWEB300: Accessory AERWEB allows This accessory allows further sound reduc19 °C down to -10 °C. Standard for Versions
remote control of a chiller through a comtion. Must be requested at time of order and
HD, HL, and HE.
only.
parallel installed constant flow chillers pro• KRSDES: Evaporator and desuperheater
remote control max. 6 units in RS485 netviding individual chiller on/off and control
exchangers trace heating. Factory fitted only.
work;
capability.
remote control max. 18 units in RS485 netFactory fitted.
work;
• PRV3: Remote control of the chiller operatAERWEB300-6G: Web server to monitor and
196
Mod. NSH
AER485P1
MULTICHILLER
AK-ACUSTIC KIT (1)
PRV3
AERWEB30
Mod. NSH
KRS (1)
KRSDES (1)(2)
Mod. NS
RIFNSH
Mod. NSH
GP500B (1)
GP300M+300M (1)
GP300M+400M (1)
GP400M+400M (1)
Mod.NSH
DCPX(3)(4)
Mod.NSH (version °- L)
AVX(00)
AVX(PA)
AVX(PC)
AVX(PE)
AVX(PG)
AVX(PJ)
Mod.NSH(version A - E)
AVX(00)
AVX(PA)
AVX(PC)
AVX(PE)
AVX(PG)
AVX(PJ)
2202
✔(x2)
✔
✔
✔
✔
2202
KRS19
KRS19DES
2202
2202
2202
✔
2352
✔(x2)
✔
✔
✔
✔
2352
KRS19
KRS19DES
2352
2352
2352
✔
2502
✔(x2)
✔
✔
✔
✔
2502
KRS19
KRS19DES
2502
2502
2502
✔
2652
✔(x2)
✔
✔
✔
✔
2652
KRS19
KRS19DES
2652
2652
2652
✔
2802
✔(x2)
✔
✔
✔
✔
2802
KRS19
KRS19DES
2802
2802
2802
✔
3002
✔(x2)
✔
✔
✔
✔
3002
KRS14
KRS14DES
3002
3002
3002
3202
✔(x1)
✔
✔
✔
✔
3202
KRS14
KRS14DES
3202
3202
3202
✔
✔
3402
✔(x1)
✔
✔
✔
✔
3402
KRS14
KRS14DES
3402
3402
3402
3602
✔(x1)
✔
✔
✔
✔
3602
KRS14
KRS14DES
3602
3602
3602
✔
2202
DCPX73
2202
544
544
544
544
544
544
2202
543
543
543
543
543
543
2352
DCPX73
2352
545
546
546
546
546
546
2352
545
545
545
545
545
545
2502
DCPX73
2502
547
547
547
547
548
548
2502
549
550
550
550
550
550
2652
DCPX73
2652
549
549
549
549
550
550
2652
551
551
551
551
551
551
2802
DCPX73
2802
549
550
550
550
550
550
2802
551
551
551
551
551
551
3002
DCPX73
3002
552
553
553
553
553
553
3002
554
553
553
553
553
553
3202
DCPX73
3202
552
553
555
555
555
555
3202
556
553
555
555
555
555
3402
DCPX73
3402
557
557
557
557
557
557
3402
557
557
557
557
557
557
✔
3602
DCPX73
3602
558
558
558
558
558
558
3602
559
559
559
559
559
559
Accessories available for all versions
(1)Accessory only factory fitted
(2)Accessory KRSDES includes evaporator and desuperheater heat exchangers trace heating
(3) Standard for low noise Versions(L/E) and with desuperheater(D)
(4)Fans Inverter (J): DCPX not necessary. Fans are already equipped with speed controller
197
Technical Data
Unit Configurator
By suitably combining the numerous options available it is possible to configure each model in such a way as to meet the most demanding of system requirements.
12
3 4 5 6
7
8
9
10
11
12
13
14 15
||||||||||
Code
Heat
|
Condenser coil
|
Power supply
|
||
Recovery
|||
Size ModelVersion Fan Pump
Code:
NS
Size:
1251, 1401, 1601, 1801, 1402, 1602, 1802, 2002, 2202
2352, 2502, 2652, 2802,3002, 3202,3402, 3602
Expansion device:
X- Electronic thermostatic valve, max. temp. of water produced: +4°C
Model:
H
- Heat pump
Heat recovery:
°
- Without heat recovery
D
- With desuperheaters
Version:
°
L
A
E
-
Standard
Standard low noise version
High efficiency
High efficiency low noise version
Attention:
The standard options are marked with the symbol °
Condenser coil:
° - Aluminium
R - Copper
S - Tinned copper
Fan:
° - Standard
J - Inverter
Power supply:
* (available for sizes 1402,1602,1802,2002,2202)
** (not available for sizes 1801, 3402, 3602)
Pump:
00 - Without pump assembly
PA - Pump assembly (Pump A)
PC - Pump assembly (Pump C)
PE - Pump assembly (pump E)
PG - Pump assembly (Pump G)
Example of the configuration fields: NS1401XH°°°°00
This is an NS unit, size 1401, electronic expansion valve, heat pump model,
without heat recovery, standard version with aluminium condenser coils, standard
fans, 400V 3~50Hz power supply with fuse, without pump assembly
NSH
Cooling capacity
Total input power
Water flow rate
evaporator
Pressure drop
evaporator
U.M.
kW
kW
l/h
kPa
Heating capacity
kW
Total input power
kW
Water flow rate
condenser
Pressure drop
condenser
l/h
kPa
VERS.
1251
1401
1601
1801
1402
1602
1802
2002
H°
245
261
297
354
242
299
343
367
HL
236
251
281
336
228
286
328
355
HA
263
282
310
366
258
316
366
385
HE
251
267
293
344
243
302
350
367
H°
91
100
110
134
97
111
130
134
HL
94
105
116
140
100
118
137
137
HA
86
94
107
127
94
107
124
131
HE
91
101
115
135
100
115
131
139
H°
42140
44890
51080
60890
41620
51430
59000
63120
HL
40590
43170
48330
57790
39220
49190
56420
61060
HA
45240
48500
53320
62950
44380
54350
62950
66220
HE
43170
45920
50400
59170
41800
51940
60200
63120
H°
34
25
39
32
33
32
40
45
HL
32
23
35
30
30
30
37
43
HA
38
41
27
43
36
50
43
47
HE
35
37
24
38
33
46
39
43
H°/HL
275
291
336
381
272
340
380
410
HA/HE
281
297
332
393
281
342
395
412
141
H°/HL
92
98
110
129
97
112
128
HA/HE
87
93
103
125
92
105
122
132
H°/HL
47300
50050
57790
65530
46780
58480
65360
70690
HA/HE
48330
51080
57100
67600
48330
58820
67940
70690
H°/HL
45
33
53
40
44
45
52
60
HA/HE
47
49
33
54
47
64
54
58
EFFICIENCIES
EER
W/W
COP
ESEER
W/W
W/W
H°
2.69
2.61
2.70
2.64
2.49
2.69
2.64
2.74
HL
2.51
2.39
2.42
2.40
2.28
2.42
2.39
2.59
HA
3,06
3,00
2,90
2,88
2,74
2,95
2,95
2,94
HE
2,76
2,64
2,55
2,55
2,43
2,63
2,67
2,64
H°/HL
2,99
2,97
3,05
2,95
2,80
3,04
2,97
2,91
HA/HE
3,23
3,19
3,22
3,14
3,05
3,26
3,24
3,11
H°
3,15
3,04
3,14
3,07
3,02
3,25
3,18
3,29
HL
3,09
2,94
2,97
2,96
2,90
3,07
3,05
3,27
HA
3,51
3,44
3,31
3,30
3,23
3,48
3,49
3,48
HE
3,36
3,21
3,09
3,10
3,05
3,29
3,33
3,30
ELECTRICAL DATA
Power supply
Input current
(COOLING MODE)
Input current
(HEATING MODE)
400V 3~ 50Hz
A
A
Maximum current
(FLA)
A
Starting current
(LRA)
A
H°
157
174
189
226
173
192
225
232
HL
166
185
204
242
182
207
241
245
HA
149
164
185
215
168
186
216
227
HE
161
178
202
234
181
202
233
246
H°/HL
159
171
189
218
173
193
223
242
HA/HE
150
163
180
212
165
182
213
229
H°/HL
209
242
258
316
276
276
325
352
HA/HE
209
242
258
316
276
276
325
352
H°/HL
327
387
431
472
251
251
305
313
HA/HE
327
387
431
472
251
251
305
313
* data in accordance with ISO 14511
NOMINAL CONDITIONS:
Cooling mode
∆t = 5 K.
198
Heating mode
∆t = 5 K.
199
Technical data
NSH
Technical data
U.M.
VERS.
1251
1401
1601
COMPRESSOR
N° compressors/circuits
1801
Total input power
n°/n°
1/1
2002
1/1
1/1
1/1
2/2
2/2
2/2
2/2
Quantity
Water connections
Quantity
m³/h
kW
A
n°
436
488
507
518
560
586
637
688
254
145
168
191
201
209
216
230
250
270
H°
67940
74480
80320
84450
89270
95970
102160
111970
121780
82320
78540
107240
137200
H°
10,5
10,5
10,5
14
10,5
10,5
14
17,5
HL
7,2
7,2
7,2
9,6
7,2
7,2
9,6
12
HA
10,5
10,5
10,5
14,0
10,5
10,5
14,0
Total input power
kW
HL
65530
71380
76710
80670
84620
91500
96660
106120
115580
HA
71380
78260
86000
90300
94260
101820
106640
116270
125900
HE
67940
74990
83940
87200
89100
96320
100800
109570
118340
17,5
H°
40
36
41
23
25
32
39
35
32
12
HL
37
34
38
21
22
29
35
32
30
HA
53
37
38
40
43
34
27
35
43
H°
22,2
22,2
22,2
29,6
22,2
22,2
29,6
37,0
HL
22,2
22,2
22,2
29,6
22,2
22,2
29,6
37,0
HA
22,2
22,2
22,2
29,6
22,2
22,2
29,6
37,0
37,0
H°
6
6
6
8
6
6
8
10
HL
6
6
6
8
6
6
8
10
HA
6
6
6
8
6
6
8
10
10
Water flow rate
evaporator
Pressure drop
evaporator
Heating capacity
l/h
kPa
kW
Total input power
kW
Water flow
condenser
l/h
Pressure drop
condenser
kPa
HE
48
34
35
37
39
30
24
31
38
H°/HL
435
479
523
556
588
627
672
717
762
HA/HE
450
502
541
563
585
629
664
725
786
H°/HL
145
164
175
185
194
208
220
239
258
HA/HE
139
156
169
175
183
196
206
228
250
H°/HL
74820
82390
89960
95630
101140
107840
115580
123320
131060
HA/HE
77400
86340
93050
96840
100620
108180
114200
124700
135200
H°/HL
51
47
50
31
35
43
53
47
40
HA/HE
67
49
47
49
53
41
33
43
54
H°
2,74
2,61
2,57
2,54
2,63
2,66
2,70
2,67
2,64
EFFICIENCIES
103,8
101,2
98,0
138,2
103,8
101,2
143,4
143,4
EER
6”
H°/HL
W/W
1
COP
dm3
HAH/E
Ø
HA/HE
96,0
101,2
98,1
132,9
96,0
101,2
132,9
HA/HE
W/W
132,9
6”
ESEER
W/W
1
HL
2,57
2,39
2,32
2,30
2,34
2,41
2,42
2,41
2,40
HA
3,03
2,90
2,91
2,84
2,82
2,95
2,90
2,89
2,88
HE
2,72
2,60
2,55
2,52
2,48
2,59
2,55
2,55
2,55
H°/HL
3,00
2,92
2,99
3,01
3,03
3,01
3,05
3,00
2,95
HA/HE
3,24
3,22
3,20
3,22
3,20
3,21
3,22
3,18
3,14
H°
3,30
3,12
3,07
3,05
3,17
3,09
3,14
3,10
3,07
HL
3,26
3,04
2,95
2,92
2,98
2,97
2,98
2,96
2,96
HA
3,56
3,41
3,44
3,36
3,33
3,37
3,31
3,31
3,30
HE
3,40
3,25
3,18
3,15
3,11
3,15
3,09
3,08
3,09
H°
245
283
310
330
340
363
378
415
453
HL
259
302
333
354
368
389
407
445
484
HA
233
268
295
318
335
349
370
400
430
HE
254
293
333
349
365
380
403
436
468
H°/HL
246
279
301
319
335
360
378
407
436
HA/HE
236
267
292
303
318
342
359
391
423
H°/HL
370
390
410
443
476
500
516
574
631
HA/HE
370
390
410
443
476
500
516
574
631
H°/HL
350
365
436
461
521
534
578
612
653
HA/HE
350
365
436
461
521
534
578
612
653
ELECTRICAL DATA
dm3
25
Quantity
n°
2
Power supply
Sound data
H°
93,5
93,5
94,5
96
94
95
96
96,5
HL
88,5
88,5
89,5
91
89
90
91
91,5
HA
93,5
93,5
94,5
96
94
95
96
96,5
HE
88,5
88,5
89,5
91
89
90
91
91,5
H°/HA
61,5
61,5
62,5
63,5
62
63
63,5
64
HL/HE
56,5
56,5
57,5
58,5
57
58
58,5
59
(1)Aermec determines the value of sound power on the basis of
measurements made in accordance with ISO 9614-2, as required
for Eurovent certification. .
(2)Sound pressure measured in free field over a reflective plane
(directivity factor Q=2) , in cooling mode, at a distance of 10
metres from the outer surface of the unit, in accordance with ISO
3744..
200
395
HE
109200
H°/HL
dB(A)
732
HE
196000
78540
Capacity
Sound power (2)
676
280
117600
Ø
dB(A)
*620
234
82320
H°/HL
n°
592
214
HE
dm3
n°
548
201
153200
8
525
194
112200
6
500
185
117600
6
455
172
156000
8
415
157
112200
6
672
HA
137
117600
6
617
HA
117600
6
562
268
HA
29,6
532
256
149800
22,2
492
244
119840
22,2
469
232
84000
29,6
446
220
89880
22,2
415
221
119840
22,2
381
210
84000
22,2
708
HL
210
89880
9,6
*3602
651
197
89880
7,2
*3402
594
204
HL
7,2
3202
558
193
214000
9,6
3002
519
192
171200
7,2
2802
491
182
120000
7,2
2652
467
174
128400
7,2
2502
433
166
171200
expansion vessel
Sound power(1)
(COOLING MODE)
kW
2352
395
148
120000
shell & TUBE heat exchanger
Water contents
Cooling capacity
2202
H°
144
128400
Water connections
U.M VERS.
H°
128400
HE
Water contents
NSH
HL
H°
HE
Quantity
1802
(standard)
HE
Total input current
1602
TWIN-ROTOR screw
FAN
Air flow rate
1402
Total input current
(COOLING MODE)
Total input current
(HEATING MODE)
Maximum current
(FLA)
Starting current
(LRA)
400V 3PH~ 50Hz
A
A
A
A
NOMINAL CONDITIONS:
Cooling mode
∆t = 5 K.
Heating mode
∆t = 5 K.
199
Dimensions (mm)
Technical Data
U.M
VERS
2202
2352
2502
2652
COMPRESSOR
Total input current
Quantity
3202
3402
3602
2/2
FANS
Total input power
3002
BI-SCREW
Air flow rate
2802
standard
m³/h
kW
A
n°
H°
214000
214000
214000
207000
200000
248400
240000
291200
342400
HL
149800
149800
149800
144900
140000
173880
168000
203840
239680
HA
196000
196000
196000
191500
187000
229800
224400
268200
312000
HE
137200
137200
137200
134050
130900
196140
157080
187740
218400
H°
17,5
17,5
17,5
17,5
17,5
21
21
24,5
28
HL
12
12
12
12
12
14,4
14,4
16,8
19,2
HA
17,5
17,5
17,5
17,5
17,5
21,0
21,0
24,5
28,0
HE
12
12
12
12
12
14,4
14,4
16,8
19,2
H°
37,0
37,0
37,0
37,0
37,0
44,4
44,4
51,8
59,2
HL
37,0
37,0
37,0
37,0
37,0
44,4
44,4
51,8
59,2
HA
37,0
37,0
37,0
37,0
37,0
44,4
44,4
51,8
59,2
HE
37,0
37,0
37,0
37,0
37,0
44,4
44,4
51,8
59,2
H°
10
10
10
10
10
12
12
14
16
HL
10
10
10
10
10
12
12
14
16
HA
10
10
10
10
10
12
12
14
16
HE
10
10
10
10
10
12
12
14
16
138,2
132,9
159,8
159,8
159,8
199,2
196,0
236,2
276,4
1
1
1
1
1
2
2
2
2
159,8
159,8
149,9
220,7
220,7
199,3
196,2
231,0
265,8
Water contents
dm3
H°/HL
Water connections
Ø
H°/HL
Quantity
n°
H°/HL
Water contents
dm3
HA/HE
Water connections
Ø
HA/HE
Quantity
n°
HA/HE
Capacity
dm3
All
Quantity
n°
All
A
C
B
6”
6”
1
1
1
1
1
2
2
2
2
expansion vessel
25
2
2
2
2
2
4
4
4
4
sound data
DIMENSIONS
U.M.
Vers.
1251
1401
1601
1801
1402
1602
1802
2002
Height (A)
mm
All
2450
2450
2450
2450
2450
2450
2450
2450
Width (B)
mm
All
2200
2200
2200
2200
2200
2200
2200
2200
Lenght (C)
mm
All
3780
3780
3780
4770
3780
3780
4770
5750
Weight empty
Kg
H°H/L
3150
3165
3340
4005
3475
3800
3930
4290
Weight operating
Kg
H°H/L
3255
3265
3440
4145
3580
3900
4075
4435
Weight empty
Kg
HA/HE
3245
3280
3435
4115
3570
3835
4005
4385
Weight operating
Kg
HA/HE
3340
3380
3535
4250
3665
3935
4140
4520
Sound power (1)
dB(A)
H°
96,5
96,5
97
97
97
97
97,5
98,5
99
Sound power (1)
(coolign mode)
HL
91,5
91,5
92
92
92
92
92,5
93,5
94
dB(A)
HA
96,5
96,5
97
97
97
97
97,5
98,5
99
HE
91,5
91,5
92
92
92
92
92,5
93,5
94
DIMENSIONS
U.M.
Vers.
2202
2352
2502
2652
2802
3002
3202
3402
3602
dB(A)
H°/HA
64
64
64,5
64,5
64,5
64
65
65,5
66
Height (A)
mm
All
2450
2450
2450
2450
2450
2450
2450
2450
2450
dB(A)
HL/HE
59
59
59,5
59,5
59,5
59
60
60,5
61
Width (B)
mm
All
2200
2200
2200
2200
2200
2200
2200
2200
2200
Lenght (C)
mm
All
5750
5750
5750
5750
5750
7160
7160
8150
9140
Weight empty
Kg
H°/HL
4355
4735
5090
5210
5330
6330
6555
7220
7885
Sound pressure (2)
(1)Aermec determines the value of sound power on the basis of
measurements made in accordance with ISO 9614-2, as required
for Eurovent certification.
(2)Sound pressure measured in free field over a reflective plane
(directivity factor Q=2) , in cooling mode, at a distance of 10
metres from the outer surface of the unit, in accordance with ISO
3744.
202
Weight operating
Kg
H°/HL
4495
4870
5250
5370
5490
6530
6750
7455
8160
Weight empty
Kg
HA/HE
4570
4940
5265
5470
5610
6540
6745
7425
8105
Weight operating
Kg
HA/HE
4730
5100
5415
5690
5830
6740
6940
7655
8370
Cod.: SNSHUY.01 /1201
NSH
203
nEW
NS
Freecooling
Air cooled chillers with axial fans and screw compressors
R134a
Compatibility accessories
Mod. NS
AER485P1
MULTICHILLER
(1)(3)AK-ACUSTIC KIT
PRV3
AERWEB300
Mod. NS
AER485P1
MULTICHILLER
1251
✔(x1)
✔
✔
✔
✔
3202
✔(x2)
✔
1401
✔(x1)
✔
✔
✔
✔
3402
✔(x2)
✔
1601
✔(x1)
✔
✔
✔
✔
3602
✔(x2)
✔
1801
✔(x1)
✔
✔
✔
✔
3902
✔(x2)
✔
2101
✔(x1)
✔
✔
✔
✔
4202
✔(x2)
✔
2401
✔(x1)
✔
✔
✔
✔
4502
✔(x2)
✔
1402
✔(x2)
✔
✔
✔
✔
4802
✔(x2)
✔
1602
✔(x2)
✔
✔
✔
✔
5002
✔(x2)
✔
1802
✔(x2)
✔
✔
✔
✔
5202
✔(x2)
✔
2002
✔(x2)
✔
✔
✔
✔
5402
✔(x2)
✔
2202
✔(x2)
✔
✔
✔
✔
5702
✔(x2)
✔
2352
✔(x2)
✔
✔
✔
✔
6003
✔(x3)
✔
2502
✔(x2)
✔
✔
✔
✔
6303
✔(x3)
✔
2652
✔(x2)
✔
✔
✔
✔
6603
✔(x3)
✔
2802
✔(x2)
✔
✔
✔
✔
6903
✔(x3)
✔
3002
✔(x2)
✔
✔
✔
✔
7203
✔(x3)
✔
PRV3
AERWEB300
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Mod. NS A/E
1251
1401
1601
1801
2101
2401
1402
1602
1802
2002
2202
2352
2502
2652
2802
3002
(1)GP 300M
✔(x1)
✔(x1)
✔(x1)
(1)GP 400M
✔(x1)
(1)GP 500M
✔(x1)
✔(x1)
(1)GP 300B
✔(x1)
✔(x1)
(1)GP 400B
✔(x1)
(1)GP 500B
✔(x1)
✔(x1)
✔(x1)
✔(x1)
✔(x1)
✔(x1)
(1)GP 300M+300M
✔(x2)
(1)(4)KRSDES
Mod. NS A/E
3202
3402
3602
3902
4202
4502
4802
5002
5202
5402
5702
6003
6303
6603
6903
7203
(1)GP 300M+300M
✔(x2)
(1)GP 300M+400M
✔(x2)
(1)GP 400M+400M
✔(x2)
(1)GP 400M+500M
✔(x2)
✔(x2)
(1)GP 500M+500M
✔(x2)
✔(x2)
✔(x2)
✔(x2)
✔(x2)
✔(x2)
(1)GP 400M+400M+500M
✔(x3)
(1)GP 400M+500M+500M
✔(x3)
✔(x3)
(1)GP 500M+500M+500M
✔(x3)
✔(x3)
(1)(4)KRSDES
Mod. NS A/E
1251
1401
1601
1801
2101
2401
1402
1602
1802
2002
2202
2352
2502
2652
2802
3002
AVX
501
501
501
506
512
512
501
501
505
511
511
511
511
511
511
509
1251F
1401F
1601F
1801
2101
2401
1402
1602
1802
2002
2202
2352
2502
2602
2802
3002F
(1)(2)RIFNS*
Mod. NS A/E
3202
3402
3602
3902
4202
4502
4802
5002
5202
5402
5702
6003
6303
6603
6903
7203
AVX
507
513
516
518
518
521
521
560
560
560
560
525
527
527
530
530
3202F
3402F
3602
3902
4202
4502
4802
5002
5202
5402
5702
6003
6303
6603
6903
7203
(1)(2)RIFNS*
*example: RIFNS1251F
Notes:
(1) Accessory only factory fitted. Number in brackets, i.e. (x1) indicates quantity.
(2) Accessory only available with 400V-3-50Hz power supply
Unit Configurator
Operates to 46°C ambient
Available with pump assembly
By suitably combining the numerous options available it is possible to configure each model in such a way as to meet even the most demanding of system requirements.
Characteristics
• Screw compressors with modulating capacity
control from 40 to 100%. (25 to 100% with
electronic expansion valve option) and
acoustical enclosure as standard
• Shell and tube heat exchanger optimised for
refrigerant R134a
• Electronic expansion valve as standard in
sizes 5002 to 5702
• Three-way valve installed on the hydraulic circuit to modulate flow to the Free-cooling coil
• Available versions: High Efficiency [A], Low
noise High Efficiency [E]
• Partial heat recovery (option) desuperheater)
• Pump assembly option (single pump or run
and standby pumps with two 25 litre expansion vessels)
• Inverter fans with high static pressure option
• Condenser coil with aluminium, coated aluminium, copper or tinned copper fins
- Maximum external air temperature:
42°C for size 1601 and from 3002 to 3402
44°C for sizes 5002 to 5702
46°C for all other sizes
- Ability to exceed operating limits with a reduction of capacity using an intelligent algorithm
that avoids a fault trip-out
• Low sound level
• Low noise axial fans with aerodynamic profile
blades
• Acoustical compressor enclosure as standard
• For the low-noise versions:
insulation
• DCPX as standard: fan speed control by
means of phase-cut controller
Field key:
12
|
Code
3 4 5 6
7
|
|
|
Expansion device
|
Size
8
9
|
|
|
Heat recovery |
Model
Accessories
• AER 485P1: RS-485 interface for supervision
remote control max. 18 units in RS485 net• AVX: Spring anti-vibration mounts. For comto the technical manual.
patibility of the AVX mounts refer to the tech- • AERWEB300: Accessory AERWEB allows • AK: AcOustic kit (only for Versions E).
nical manual.
remote control of a chiller through a com- This accessory allows further sound reduc• KRSDES: (available for desuperheater "D"
tion. Must be requested at time of order and
option). Evaporator and desuperheater
exchangers trace heating. Factory fitted only
AERWEB300-6: Web server to monitor and • MULTICHILLER: Control system for multiple
remote control max. 6 units in RS485 netparallel installed constant flow chillers proprotection against accidental or hail damage.
work;
Factory fitted.
capability.
• PRV3: Remote control of the chiller operatremote control max. 18 units in RS485 neting functions.
work;
• RIFNS :Power factor correction. Connected in
remote control max. 6 units in RS485 netreduction of input current. Must be requested
10
11
|
|
|
Condenser coil
|
Version
Code:
Fan:
NS
°
1251, 1401, 1601, 1801, 2101, 2401, 1402, 1602, 1802, 2002, 2202
2352, 2502, 2652, 2802,3002, 3202,3402, 3602, 3902,4202,4502,
4802, 5002, 5202, 5402, 5703, 6003, 6303, 6603, 6903, 7203
Expansion device:
°
12
13
14 15
|
|
|
|
Power supply
|
|
|
Fan
Pump assembly
- Standard
M - High static pressure (not compatible with Power supply fields “2”, “4”, “5” and “9”)
Size:
- Thermostatic expansion valve, minimum leaving water temperature +4°C
J
- Inverters (not compatible with Power supply fields “5” and “9”)
Power supply:
°
- 400V 3~ 50Hz with fuses
Y - Thermostatic expansion valve , leaving liquid temperature +4°C to -6°C
X - Electronic expansion valve, minimum leaving water temperature +4°C
(for lower temperatures please contact the factory)
F - Free-cooling
Heat recovery:
°
Pump assembly:
Model:
D -With desuperheater
204
(3) Accessory only available for low noise versions
(4) Accessory KRSDES includes evaporator and desuperheater heat exchangers trace heating
Version:
PB - Pump assembly (Pump A and standby pump)
PD - Pump assembly (Pump C and standby pump)
A - High efficiency
PE - Pump assembly (Pump E)
PF - Pump assembly (Pump E and standby pump)
Coil:
°
- Aluminium
PH - Pump assembly (Pump G and standby pump)
R - Copper
S
PK - Pump assembly (Pump J and standby pump)
- Tinned copper
PN - Pump assembly (Pump N) ***
PO - Pump assembly (Pump N and standby pump)***
PP - Pump assembly (Pump P) ***
PQ - Pump assembly (Pump P and standby pump)***
Limitations of option “D” with Desuperheater
not available in sizes 2002-2802
available in sizes 1251 to 1601, 1402, 1602, 1801, 1802,
from 3002 to 4202, and from 6003 to 6603 without evaporator pump assembly
* not available in sizes 1251 to 2401, and 2352 to 7203
** not available in sizes 1801 to 2401, and 3402 to 7203
***not available in sizes 1251 to 1801, 1402 to 2002,
3002 to 4202, and 6003 to 6603
205
Mod. NS
Cooling capacity
Total input power
Technical Data
U.M.
kW
kW
E.E.R.
Total input current
Cooling capacity
Total input power
A
kW
kW
EER
Total input current
A
Water flow rate
l/h
Compressors
*Capacity control
n°
 Sound pressure (Chiller)
 Sound pressure (Freecooling)
dBA
dBA
Air flow rate (Chiller)
m 3/h
Air flow rate (Freecooling)
Fans
(1) Evaporators
m3/h
n°
n°
Vers.
FA
FE
FA
FE
FA
FE
FA
FE
FA
FE
All
FA
FE
All
FA
FE
All
%
FA
FE
FA
FA
FE
FA
FA/FE
FA/FE
1251
272
243
91
93
2.99
2.61
160
164
280
268
12
23.3
22.3
24
46780
41800
1
40-100
62
54
62
102000
70000
102000
6
1
1401
304
282
104
105
2.92
2.69
180
182
291
283
12
24.3
23.6
24
52290
48500
1
40-100
63
55
63
102000
78000
102000
6
1
1601
338
322
115
117
2.94
2.75
196
199
301
297
12
25.1
24.8
24
58140
55380
1
40-100
65
57
65
102000
87000
102000
6
1
1801
408
372
144
148
2.83
2.51
238
245
403
391
16
25.2
24.4
32
70180
63980
1
40-100
65
57
65
136000
100000
136000
8
1
2101
465
415
157
161
2.96
2.58
267
274
486
466
20
24.3
23.3
40
79980
71380
1
40-100
66
58
66
170000
112000
170000
10
1
2401
518
471
177
183
2.93
2.57
299
309
503
490
20
25.2
24.5
40
89100
81010
1
40-100
66
58
66
170000
127000
170000
10
1
1402
285
257
103
105
2.77
2.45
179
182
285
249
12
23.8
20.8
24
49020
44200
2
40-100
64
56
64
102000
74000
102000
6
1
1602
324
295
119
121
2.72
2.44
205
208
297
288
12
24.8
24.0
24
55730
50740
2
40-100
65
57
65
102000
80000
102000
6
1
1802
377
340
133
136
2.83
2.50
225
230
393
379
16
24.6
23.7
32
64840
58480
2
40-100
65
57
65
136000
96000
136000
8
1
Mod. NS
U.M.
Water flow rate
l/h
Compressors
*Capacity control
n°
m 3/h
Fans
(1) Evaporators
m3/h
n°
n°
Mod. NS
U.M.
U.M.
Cooling capacity
kW
Total input power
kW
E.E.R.
Total input current
W/W
A
Cooling capacity
kW
Total input power
kW
EER
W/W
Total input current
A
Water flow rate
l/h
Compressors
*Capacity control
n°
dBA
dBA
m3/h
Fans
(1) Evaporators
m3/h
n°
n°
Mod. NS
U.M.
Cooling capacity
kW
Total input power
kW
E.E.R.
Total input current
A
Cooling capacity
kW
Total input power
kW
EER
Total input current
A
Vers.
FA
FE
FA
FE
FA
FE
FA
FE
FA
FE
All
FA
FE
All
FA
FE
All
%
FA
FE
FA
FA
FE
FA
All
All
2002
429
389
153
156
2.80
2.49
261
266
452
420
20
22.6
21.0
40
73790
66910
2
40-100
66
58
66
170000
124500
170000
10
1
2202
480
439
168
167
2.86
2.63
288
286
491
476
20
24.6
23.8
40
82560
75510
2
40-100
66
58
66
170000
120000
170000
10
1
2352
501
457
177
179
2.83
2.55
305
308
498
483
20
24.9
24.2
40
86170
78600
2
40-100
66
58
66
170000
123000
170000
10
1
2502
522
475
186
191
2.81
2.49
322
331
505
489
20
25.3
24.5
40
89780
81700
2
40-100
66
58
66
170000
130000
170000
10
1
2652
553
514
200
203
2.77
2.53
344
349
514
502
20
25.7
25.1
40
95120
88410
2
40-100
67
59
67
170000
130000
170000
10
1
2802
584
554
215
214
2.72
2.59
366
364
522
514
20
26.1
25.7
40
100450
95290
2
40-100
67
59
67
170000
140000
170000
10
1
3002
642
604
219
222
2.93
2.72
376
381
592
580
24
24.7
24.2
48
110430
103890
2
40-100
67
59
67
204000
165000
204000
12
2
3202
675
645
230
233
2.93
2.77
391
396
602
594
24
25.1
24.8
48
116100
110940
2
40-100
68
60
68
204000
174000
204000
12
2
3402
746
694
259
265
2.88
2.62
434
444
705
688
28
25.2
24.6
56
128310
119370
2
40-100
68
60
68
238000
187000
238000
14
2
Vers.
FA
FE
FA
FE
FA
FE
FA
FE
FA
FE
All
FA
FE
All
3602
817
744
288
298
2.84
2.50
476
493
807
782
32
25.2
24.4
64
3902
873
787
300
311
2.91
2.53
505
524
889
585
36
24.7
16.3
72
4202
926
843
321
333
2.88
2.53
537
557
907
881
36
25.2
24.5
72
4502
983
887
334
346
2.94
2.56
566
586
989
956
40
24.7
23.9
80
4802
1036
943
354
369
2.93
2.56
598
623
1007
979
40
25.2
24.5
80
5002
1084
1017
374
381
2.90
2.67
629
641
993
976
40
24.8
24.4
80
5202
1154
1066
403
413
2.86
2.58
672
689
1009
988
40
25.2
24.7
80
5402
1225
1116
432
445
2.84
2.51
714
735
1025
1001
40
25.6
25.0
80
5702
1282
1159
444
457
2.89
2.54
743
765
1035
1010
40
25.9
25.3
80
1601
2450
2200
3780
3840
1801
2450
2200
4770
5000
2101
2450
2200
5750
5950
2401
2450
2200
5750
5980
1402
2450
2200
3780
4010
1602
2450
2200
3780
4030
1802
2450
2200
4770
4730
2002
2450
2200
5750
5470
2202
2450
2200
5750
5790
2352
2450
2200
5750
6340
2502
2450
2200
5750
6330
2652
2450
2200
5750
6340
2802
2450
2200
5750
6350
3002
2450
2200
7160
7210
3202
2450
2200
7160
7310
3402
2450
2200
8150
8410
3602
2450
2200
9140
9180
3902
2450
2200
10120
10580
4202
2450
2200
10120
11580
4502
2450
2200
11100
11104
4802
2450
2200
11100
11320
5002
2450
2200
11100
12300
5202
2450
2200
11100
12600
5402
2450
2200
11100
12700
5702
2450
2200
11100
12800
6003
2450
2200
14490
15160
W/W
A
Cooling capacity
kW
kW
W/W
EER
Total input current
A
Water flow rate
l/h
Compressors
*Capacity control
n°
dBA
dBA
m3/h
Fans
(1) Evaporators
m3/h
n°
n°
6603
1444
1315
498
514
2.90
2.56
836
863
1410
1371
56
25.2
24.5
112
248370
226180
3
40-100
71
63
71
476000
354000
476000
28
3
4502
169080
152570
2
40-100
69
61
69
340000
239000
340000
20
2
1401
2450
2200
3780
3770
kW
6303
1391
1259
478
492
2.91
2.56
804
828
1393
1347
56
24.9
24.1
112
239250
216550
3
40-100
70
62
70
476000
339000
476000
28
3
4202
159270
145000
2
40-100
69
61
69
306000
227000
306000
18
2
1251
2450
2200
3780
3760
Total input power
Total input current
3902
150160
135370
2
40-100
69
61
69
306000
212000
306000
18
2
6003
1335
1216
465
479
2.87
2.54
775
798
1310
1272
52
25.2
24.5
104
229620
209150
3
40-100
70
62
70
442000
327000
442000
26
3
kW
E.E.R.
3602
140530
127970
2
40-100
68
60
68
272000
200000
272000
16
2
Vers.
FA
FE
FA
FE
FA
FE
FA
FE
FA
FE
All
FA
FE
All
FA
FE
All
%
FA
FE
FA
FA
FE
FA
FA/FE
FA/FE
Cooling capacity
Total input power
Mod. NS
dBA
dBA
Vers.
FA
FE
All
%
FA
FE
All
FA
FE
FA
FA/FE
FA/FE
6903
1501
1358
511
527
2.94
2.58
865
892
1493
1446
60
24.9
24.1
120
258170
233580
3
40-100
71
63
71
510000
366000
510000
30
3
4802
178190
162200
2
40-100
69
61
69
340000
254000
340000
20
2
5002
186450
174930
2
25-100
70
62
70
340000
254000
340000
20
2
7203
1554
1414
532
549
2.92
2.58
897
926
1510
1469
60
25.2
24.5
120
267290
243210
3
40-100
71
63
71
510000
381000
510000
30
3
5202
198490
183350
2
25-100
71
63
71
340000
254000
340000
20
2
5402
210700
191950
2
25-100
71
63
71
340000
254000
340000
20
2
5702
220510
199350
2
25-100
71
63
71
340000
254000
340000
20
2
(1) = Tubular
band
Power supply voltage= 400V 3~ 50 Hz.
conditions:
Cooling:
- water inlet temperature
- water outlet temperature
- outside air temp.
- Dt = 5 °C.
Free-cooling
- water inlet temperature
- outside air temp.
- Glycol
12 °C;
7 °C;
35 °C;
15°C
2°C
0%
 Sound pressure measured in free field 10
metres away and direction factor = 2.
In accordance with ISO 3744
*40-100 - Partload continuous
25-100 - Electronic expansion valve
Dimensions (mm)
Mod. NS(F)
Height
Width
Length
Weight
(A)
(B)
(C)
kg
Version
Mod. NS(F)
Height
Width
Length
Weight
(A)
(B)
(C)
kg
Mod. NS(F)
Height
Width
Length
Weight
(A)
(B)
(C)
kg
Mod. NS(F)
Height
Width
Length
Weight
(A)
(B)
(C)
kg
A/E
A/E
Version
A/E
A/E
Version
A/E
A/E
Version
A/E
A/E
For transport reasons NS FREECOOLING sizes 6003 to 7203 are
shipped separated; one module consisting of two compressors and
standard electrical panel (placed in front of the unit) and one module
with one compressor and the electrical panel placed on the
A
C
B
6303
2450
2200
15470
16560
6603
2450
2200
15470
16840
6903
2450
2200
16450
17084
7203
2450
2200
16450
17300
compressor side beneath the condenser coil. On the site it is only
necessary to connect the two sections electrically. For more
*40-100 - Modulating capacity
206
207
Cod.: SNSFCUY.00 / 1211
Technical Data
new
NS
Glycol free
Air cooled chillers with axial fans and screw
compressors
R134a
Mod. NS
AER485P1
MULTICHILLER
PRV3
AERWEB300
Mod. NS
AER485P1
MULTICHILLER
PRV3
AERWEB300
1251
✔(x1)
✔
✔
✔
✔
3202
✔(x2)
✔
✔
✔
✔
1401
✔(x1)
✔
✔
✔
✔
3402
✔(x2)
✔
✔
✔
✔
1601
✔(x1)
✔
✔
✔
✔
3602
✔(x2)
✔
✔
✔
✔
Mod. NS A/E
(1)GP 300M
(1)GP 400M
(1)GP 500M
(1)GP 300B
(1)GP 400B
(1)GP 500B
(1)GP 300M+300M
(1)KRS
(1)(4)KRSDES
1251
✔ ✔(x1)
1401
✔ ✔(x1)
1601
✔ ✔(x1)
Mod NS A/E
(5)
KDI (x n°)
Mod NS A/E
(5)
KDI (x n°)
Mod NS A/E
(5)
(5)
- Ability to exceed operating limits with a reduction of capacity using an intelligent algorithm
that avoids a fault trip-out
• Low sound level
• Low noise axial fans with aerodynamic profile
blades
• Acoustical compressor enclosure as standard
• For the low-noise versions:
insulation
• DCPX as standard: fan speed control by
means of phase-cut controller
208
KDI (x n°)
1402
✔(x2)
✔
✔
✔
✔
4802
✔(x2)
✔
✔
✔
✔
1602
✔(x2)
✔
✔
✔
✔
5002
✔(x2)
✔
✔
✔
✔
1802
✔(x2)
✔
✔
✔
✔
5202
✔(x2)
✔
✔
✔
✔
2002
✔(x2)
✔
✔
✔
✔
5402
✔(x2)
✔
✔
✔
✔
2202
✔(x2)
✔
✔
✔
✔
5702
✔(x2)
✔
✔
✔
✔
2352
✔(x2)
✔
✔
✔
✔
6003
✔(x3)
✔
✔
✔
✔
2502
✔(x2)
✔
✔
✔
✔
6303
✔(x3)
✔
✔
✔
✔
2652
✔(x2)
✔
✔
✔
✔
6603
✔(x3)
✔
✔
✔
✔
2802
✔(x2)
✔
✔
✔
✔
6903
✔(x3)
✔
✔
✔
✔
3002
✔(x2)
✔
✔
✔
✔
7203
✔(x3)
✔
✔
✔
✔
1801
2101
2401
1402
1602
1802
2002
2202
2352
2502
2652
2802
3002
✔ ✔(x1)
✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x1)
✔ ✔(x2)
KRS10
KRS10
KRS11
KRS10
KRS11
KRS11
KRS11
KRS11
KRS10
KRS10
KRS11
KRS11
KRS11
KRS11
KRS11
KRS13
1251
KDI01
2002
KDI06
3602
KDI03 x2
6003
KDI03 x2+KDI04
1401
KDI01
2202
KDI08
3902
KDI03+KDI04
6303
KDI03+KDI04 x2
1601
KDI02
2352
KDI08
4202
KDI03+KDI04
6603
KDI03+KDI04 x2
1801
KDI03
2502
KDI08
4502
KDI04 x2
6903
KDI04 x3
Notes:
(1) Accessory only factory fitted. Number in brackets, i.e. (x1) indicates quantity.
(2) Accessory only available with 400V-3-50Hz power supply
(3) Accessory only available for low noise versions
(4)
(5)
2401
KDI04
2802
KDI08
5002
KDI04+KDI05
1402
KDI06
3002
KDI01+KDI02
5202
KDI05 x2
1602
KDI06
3202
KDI02 x2
5402
KDI05 x2
1802
KDI06
3402
KDI02+KDI03
5702
KDI05 x2
Accessory KRSDES includes evaporator and desuperheater heat exchangers trace heating
Accessory KDI must always be combined with the KRS and KRSDES heating elements.
KRS(obligatory accessory version “°” )/KRSDES(obligatory accessory version with desuperheater “D”)
By suitably combining the numerous options available it is possible to configure each model in such a way as to meet even the most demanding of system requirements.
Field key:
12
|
Code
3 4 5 6
7
|
|
|
Expansion device
|
Size
8
9
|
|
|
Heat recovery |
Model
10
11
|
|
|
Condenser coil
|
Version
Code:
Fan:
NS
°
2352, 2502, 2652, 2802,3002, 3202,3402, 3602, 3902,4202,4502,
4802, 5002, 5202, 5402, 5703, 6003, 6303, 6603, 6903, 7203
Expansion device:
°
12
13
14 15
|
|
|
|
Power supply
|
|
|
Fan
Pump assembly
- Standard
M - High static pressure (not compatible with Power supply fields “2”, “4”, “5” and “9”)
1251, 1401, 1601, 1801, 2101, 2401, 1402, 1602, 1802, 2002, 2202
grated GPRS modem;
AERWEB300-18G: Web server to monitor and remote
control max. 18 units in RS485 network with integrated GPRS modem;
• AK: AcOustic kit (only for Versions E).
This accessory allows further sound reduction. Must be requested at time of order and
capability.
2101
KDI04
2652
KDI08
4802
KDI04 x2
7203
KDI04 x3
Unit Configurator
- Thermostatic expansion valve, minimum leaving water temperature +4°C
J
- Inverters (not compatible with Power supply fields “5” and “9”)
Power supply:
°
- 400V 3~ 50Hz with fuses
Y - Thermostatic expansion valve , leaving liquid temperature +4°C to -6°C
X - Electronic expansion valve, minimum leaving water temperature +4°C
• PRV3: Remote control of the chiller operating functions.
• RIFNS: Power factor correction. Connected in
versions available:
AERWEB300-6G: Web server to monitor and remote
control max. 6 units in RS485 network with inte-
2401
✔(x1)
✔
✔
✔
✔
4502
✔(x2)
✔
✔
✔
✔
Size:
Accessories
• AER 485P1: RS-485 interface for supervision
• AVX: Spring anti-vibration mounts. For compatibility of the AVX mounts refer to the technical manual.
• KRS: (obligatory accessory with version “°”).
Evaporator trace heating. Factory fitted only.
• KRSDES: (obligatory accessory version with
desuperheater “D”). Evaporator and desuperheater exchangers trace heating. Factory fitted
only.
• KDI: 20 mm doubled thickness evaporator
insulation. Provides stand-still protection
down to -20°C. Must be ordered in conjunction with options KRS and KRSDES heaters.
Factory fitted.
KDI (x n°)
Mod NS A/E
Characteristics
- Gauge
- Safety pressure valve
• Available versions: High Efficiency [A], Low
noise High Efficiency [E]
• Partial heat recovery (option) desuperheater)
• Pump assembly option (single pump or run
and standby pumps with two 25 litre expansion vessels)
• Inverter fans with high static pressure option
• Condenser coil with aluminium, coated aluminium, copper or tinned copper fins
- Maximum external air temperature:
42°C for size 1601 and from 3002 to 3402
44°C for sizes 5002 to 5702
46°C for all other sizes
2101
✔(x1)
✔
✔
✔
✔
4202
✔(x2)
✔
✔
✔
✔
Mod. NS A/E
3202
3402
3602
3902
4202
4502
4802
5002
5202
5402
5702
6003
6303
6603
6903
7203
(1)GP 300M+300M
✔ ✔(x2)
(1)GP 300M+400M
✔✔(x2)
(1)GP 400M+400M
✔✔(x2)
(1)GP 400M+500M
✔✔(x2)
✔✔(x2)
(1)GP 500M+500M
✔✔(x2)
✔✔(x2)
✔✔(x2)
✔(x2)
✔✔(x2)
✔✔(x2)
(1)GP 400M+400M+500M
✔✔(x3)
(1)GP 400M+500M+500M
✔✔(x3)
✔✔(x3)
(1)GP500M+500M+500M
✔✔(x3)
✔✔(x3)
(1)KRS
KRS14
KRS13
KRS12
KRS13
KRS13
KRS14
KRS14
KRS14
KRS14
KRS14
KRS14
KRS15
KRS16
KRS16
KRS17
KRS17
(1)(4)KRSDES
Mod. NS A/E
1251
1401
1601
1801
2101
2401
1402
1602
1802
2002
2202
2352
2502
2652
2802
3002
AVX
501
501
501
506
512
512
501
501
505
511
511
511
511
511
511
509
(1)(2)RIFNS*
1251F
1401F
1601F
1801
2101
2401
1402
1602
1802
2002
2202
2352
2502
2602
2802
3002F
Mod. NS A/E
3202
3402
3602
3902
4202
4502
4802
5002
5202
5402
5702
6003
6303
6603
6903
7203
AVX
507
513
516
518
518
521
521
560
560
560
560
525
527
527
530
530
(1)(2)RIFNS*
3202F
3402F
3602
3902
4202
4502
4802
5002
5202
5402
5702
6003
6303
6603
6903
7203
*example RIFNS1251F
• Operates to 46 °C ambient
• Available with pump assembly
• High efficiency even at part loads
• Screw compressors with modulating capacity
control from 40 to 100% (25 to 100% with
electronic expansion valve option) and
acoustical enclosure as standard
• Shell and tube heat exchanger optimised for
refrigerant R134a
• Electronic expansion valve as standard in
sizes 5002 to 5702
• An intermediate plate heat exchanger provides two circuits: a glycol circuit, where
glycol is added to protect the chiller's coils
from freezing, and the chilled water circuit
without glycol.
The glycol circuit includes as standard:
- Intermediate plate heat exchanger
- Circulation pump
- Expansion vessel
- Flow switch
- Low pressure switch
1801
✔(x1)
✔
✔
✔
✔
3902
✔(x2)
✔
✔
✔
✔
(for lower temperatures please contact the factory)
B - Free-cooling Glycol-free
Heat recovery:
°
Pump assembly:
Model:
D -With desuperheater
Version:
PB - Pump assembly (Pump A and standby pump) ***
PD - Pump assembly (Pump C and standby pump) ***
A - High efficiency
PE - Pump assembly (Pump E)
PF - Pump assembly (Pump E and standby pump) ***
Coil:
°
- Aluminium
PH - Pump assembly (Pump G and standby pump) ***
R - Copper
S
PK - Pump assembly (Pump J and standby pump) ***
- Tinned copper
Limitations of option “D” with Desuperheater
not available in sizes:
available in sizes:
without evaporator pump assembly
* not available in sizes 1251 to 2401 and 2352 to 7203
** not available in sizes 1801 to 2401 and 3402 to 7203
***not available in sizes 1251 to 1601 and 3002 to 4202
- 1801,1802 / dalla 3602 alla 4202 / dala 6003 alla 6603
Pump assembly option not available in sizes 1402, 1602, 2002
- dalla 1251 alla 1601 / 1402,1602 / dalla 2002 alla 3402
209
Tecnichal data
Cooling capacity
Total input power
E.E.R.
Total input current
Cooling capacity
Total input power
EER
Total input current
Water flow rate
Compressors
*Capacity control
Air flow rate(Chiller)
Fans
(1)Evaporators
Mod. NS
Cooling capacity
Total input power
E.E.R.
Total input current
Cooling capacity
Total input power
EER
Total
Water flow rate
Compressors
*Capacity control
Air flow rate
Fans
(1)Evaporators
Mod. NS
U.M.
Vers.
BA
kW
BE
BA
kW
BE
BA
BE
BA
A
BE
kW BA /BE
kW BA /BE
BA /BE
A
BA /BE
BA
l/h
BE
n°
All
%
BA
dBA
BE
dBA
BA
BA
m3/h
BE
3
m /h
BA
n°
All
n°
All
U.M.
Vers.
BA
BE
BA
kW
BE
BA
BE
BA
A
BE
kW BA /BE
kW BA /BE
BA /BE
A
BA /BE
BA
l/h
BE
n°
All
%
BA
dBA
BE
dBA
BA
BA
m3/h
BE
m3/h
BA
n°
All
n°
All
kW
U.M.
Cooling capacity
kW
Total input power
kW
E.E.R.
Total input current
A
Cooling capacity
Total input power
EER
Total input current
kW
kW
A
Vers.
BA
BE
BA
BE
BA
BE
BA
BE
BA /BE
BA /BE
BA /BE
BA /BE
1251
272
243
91
93
2.99
2.61
160
164
213
14.0
15.2
28
46780
41800
1
40-100
62
54
62
102000
70000
102000
6
1
2002
429
389
153
156
2.80
2.49
261
266
344
25.3
13.6
51
73790
66910
2
40-100
66
58
66
170000
124500
170000
10
1
3602
817
744
288
298
2.84
2.50
476
493
614
39.6
15.5
79
1401
304
282
104
105
2.92
2.69
180
182
222
14.0
15.9
28
52290
48500
1
40-100
63
55
63
102000
78000
102000
6
1
2202
480
439
168
167
2.86
2.63
288
286
374
25.3
14.8
51
82560
75510
2
40-100
66
58
66
170000
120000
170000
10
1
3902
873
787
300
311
2.91
2.53
505
524
677
45.1
15.0
90
1601
338
322
115
117
2.94
2.75
196
199
229
14.0
16.4
28
58140
55380
1
40-100
65
57
65
102000
87000
102000
6
1
2352
501
457
177
179
2.83
2.55
305
308
379
25.4
14.9
51
86170
78600
2
40-100
66
58
66
170000
123000
170000
10
1
4202
926
843
321
333
2.88
2.53
537
557
690
45.3
15.2
91
1801
408
372
144
148
2.83
2.51
238
245
307
19.8
15.5
40
70180
63980
1
40-100
65
57
65
136000
100000
136000
8
1
2502
522
475
186
191
2.81
2.49
322
331
385
25.5
15.1
51
89780
81700
2
40-100
66
58
66
170000
130000
170000
10
1
4502
983
887
334
346
2.94
2.56
566
586
753
50.8
14.8
102
2101
465
415
157
161
2.96
2.58
267
274
370
25.3
14.6
51
79980
71380
1
40-100
66
58
66
170000
112000
170000
10
1
2652
553
514
200
203
2.77
2.53
344
349
391
27.1
14.4
54
95120
88410
2
40-100
67
59
67
170000
130000
170000
10
1
4802
1036
943
354
369
2.93
2.56
598
623
766
51.0
15.0
102
2401
518
471
177
183
2.93
2.57
299
309
383
25.5
15.0
51
89100
81010
1
40-100
66
58
66
170000
127000
170000
10
1
2802
584
554
215
214
2.72
2.59
366
364
397
27.2
14.6
54
100450
95290
2
40-100
67
59
67
170000
140000
170000
10
1
5002
1084
1017
374
381
2.90
2.67
629
641
756
51.0
14.8
102
1402
285
257
103
105
2.77
2.45
179
182
217
14.0
15.5
28
49020
44200
2
40-100
64
56
64
102000
74000
102000
6
1
3002
642
604
219
222
2.93
2.72
376
381
451
28.0
16.1
56
110430
103890
2
40-100
67
59
67
204000
165000
204000
12
2
5202
1154
1066
403
413
2.86
2.58
672
689
768
51.0
15.1
102
1602
324
295
119
121
2.72
2.44
205
208
226
14.0
16.1
28
55730
50740
2
40-100
65
57
65
102000
80000
102000
6
1
3202
675
645
230
233
2.93
2.77
391
396
458
28.0
16.4
56
116100
110940
2
40-100
68
60
68
204000
174000
204000
12
2
5402
1225
1116
432
445
2.84
2.51
714
735
780
51.0
15.3
102
1802
377
340
133
136
2.83
2.50
225
230
299
19.8
15.1
40
64840
58480
2
40-100
65
57
65
136000
96000
136000
8
1
3402
746
694
259
265
2.88
2.62
434
444
536
33.8
15.9
68
128310
119370
2
40-100
68
60
68
238000
187000
238000
14
2
5702
1282
1159
444
457
2.89
2.54
743
765
788
51.0
15.5
102
Mod. NS
U.M.
Water flow rate
l/h
Compressors
*Capacity control
n°
 Sound pressure (Freecooling) dBA
Fans
(1)Evaporators
dBA
dBA
m3/h
m3/h
n°
n°
Mod. NS
U.M.
Cooling capacity
kW
Total input power
kW
E.E.R.
W/W
Total input current
A
Cooling capacity
Total input power
EER
Total input current
kW
kW
Water flow rate
l/h
Compressors
*Capacity control
n°
A
 Sound pressure(Chiller)
dBA
Fans
(1)Evaporators
dBA
m3/h
m3/h
n°
n°
Vers.
BA
BE
All
%
BA
BE
BA
BA
BE
BA
All
All
3602
140530
127970
2
40-100
68
60
68
272000
200000
272000
16
2
Vers.
BA
BE
BA
BE
BA
BE
BA
BE
BA /BE
BA /BE
BA /BE
BA /BE
BA
BE
All
%
BA
BE
BA
BA
BE
BA
All
All
6003
1335
1216
465
479
2.87
2.54
775
798
984
65.1
15.1
130
229620
209150
3
40-100
70
62
70
442000
327000
442000
26
3
3902
150160
135370
2
40-100
69
61
69
306000
212000
306000
18
2
6303
1391
1259
478
492
2.91
2.56
804
828
1060
70.6
15.0
141
239250
216550
3
40-100
70
62
70
476000
339000
476000
28
3
4202
159270
145000
2
40 - 100
69
61
69
306000
227000
306000
18
2
4502
169080
152570
2
40-100
69
61
69
340000
239000
340000
20
2
6603
1444
1315
498
514
2.90
2.56
836
863
1073
70.8
15.2
142
248370
226180
3
40-100
71
63
71
476000
354000
476000
28
3
4802
178190
162200
2
40-100
69
61
69
340000
254000
340000
20
2
6903
1501
1358
511
527
2.94
2.58
865
892
1136
76.3
14.9
153
258170
233580
3
40-100
71
63
71
510000
366000
510000
30
3
7203
1554
1414
532
549
2.92
2.58
897
926
1149
76.5
15.0
153
267290
243210
3
40-100
71
63
71
510000
381000
510000
30
3
5002
186450
174930
2
25-100
70
62
70
340000
254000
340000
20
2
5202
198490
183350
2
25-100
71
63
71
340000
254000
340000
20
2
5402
210700
191950
2
25-100
71
63
71
340000
254000
340000
20
2
5702
220510
199350
2
25-100
71
63
71
340000
254000
340000
20
2
(1) = Shell & tube
Power supply = 400V 3~ 50 Hz.
Performance values refer to the
following conditions:
Cooling:
- entering water temperature 12 °C
- leaving water temperature 7 °C
- external air temperature 35 °C
- ∆t = 5 K.
Free-cooling glycol free
- entering water temperature 15°C
- external air temperature 2°C
- primary circuit glycol 30%
- secondary system circuit glycol 0%
e Sound pressure measured in free field
10 metres distance and directivity factor
= 2. In accordance with ISO 3744
Dimensions (mm)
Mod. NS "B"
Height
Width
Lenght
Weight
Mod. NS "B"
Height
Width
Lenght
Weight
Mod. NS "B"
Height
Width
Lenght
Weight
(A)
(B)
(C)
kg
A/E
A/E
(A)
(B)
(C)
kg
Mod. NS "B"
Height
Width
Lenght
Weight
(A)
(B)
(C)
kg
(A)
(B)
(C)
kg
A/E
A/E
1251
2450
2200
3780
3888
1602
2450
2200
3780
4158
2802
2450
2200
5750
6565
1401
2450
2200
3780
3898
1802
2450
2200
4770
4887
3002
2450
2200
7160
7466
1601
2450
2200
3780
3968
2002
2450
2200
5750
5648
3202
2450
2200
7160
7566
1801
2450
2200
4770
5157
2202
2450
2200
5750
5989
3402
2450
2200
8150
8695
2101
2450
2200
5750
6149
2352
2450
2200
5750
6539
3602
2450
2200
9140
9494
2401
2450
2200
5750
6179
2502
2450
2200
5750
6529
3902
2450
2200
10120
10936
1402
2450
2200
3780
4138
2652
2450
2200
5750
6555
4202
2450
2200
10120
11216
A/E
A/E
4502
2450
2200
11100
11502
4802
2450
2200
11100
11718
5002
2450
2200
11100
12698
5202
2450
2200
11100
12998
5402
2450
2200
11100
13098
5702
2450
2200
11100
13198
6003
2450
2200
14490
15673
A/E
A/E
For transport reasons NS GLYCOL FREE sizes 6003 to 7203 are shipped
separated; one module consisting of two compressors and standard electrical
panel (placed in front of the unit) and one module with one compressor and the
A
C
6303
2450
2200
15470
17115
6603
2450
2200
15470
17395
6903
2450
2200
16450
17639
B
7203
2450
2200
16450
17855
electrical panel placed on the compressor side beneath the condenser coil. On
the site it is only necessary to connect the two sections electrically. For more
Cod.: SNSGFUY.00 / 1201
Mod. NS
Tecnichal data
NEW
TBX
Air cooled chillers with two-stage centrifugal compressor and axial fans
R134a
T
IGHES
THE H ENCY
I
EFFIC LOGY
O
TECHN
Mod. TBX
AER485P1
PTW
1401
✔(x1)
✔
1801
✔(x1)
✔
2001
✔(x1)
✔
2302
✔(x2)
✔
2502
✔(x2)
✔
2652
✔(x2)
✔
2802
✔(x2)
✔
3202
✔(x2)
✔
3502
✔(x2)
✔
3702
✔(x2)
✔
3802
✔(x2)
✔
4102
✔(x2)
✔
Mod. TBX L/E
GP300M 1
GP400M 1
GP500M 1
GP 300M+300M 1
GP 300M+400M 1
GP 400M+400M 1
GP 400M+500M 1
GP 500M+500M 1
KRS 1
Mod. TBX °/A
GP 300M 1
GP 400M 1
GP 500M 1
GP 300M+300M 1
GP 300M+400M 1
GP 400M+400M 1
GP 400M+500M 1
GP 500M+500M 1
KRS 1
Mod. TBX °/L
AVX
RIFTBX 1
1401
✔
1801
2001
2302
2502
2652
2802
3202
3502
3702
3802
4102
✔
✔
✔
✔
✔
✔
Mod. TBX A/E
AVX
Characteristics
• New generation two-stage oil-free centrifugal
compressor with magnetic levitation bearings
• Refrigerant R134a
• Exceptional high efficiency at part load (up to
30% higher ESEER compared to standard
chillers)
• Electronic expansion valve for precise control
• Flooded shell and tube evaporator optimised
for refrigerant R134a
• Axial fans for extremely quiet operation
• Compressor features:
1. Operates without oil as bearings are magnetic levitation type. Vibration free and very
quiet
2.Provided with inverter technology that per-
mits capacity modulation down to 25%
3. Integrated controller that reduces starting current to 6 A only
• Standard “°” and Low noise “L” Versions:
1.Operating limit up to 42 °C external air temperature
2. Compressor acoustical enclosure for low
noise operation
3.Fan speed control
• High efficiency “A” and High efficiency low
noise “E” Versions:
1.Operating limit up to 42 °C external air temperature
2. Compressor acoustical enclosure for low
noise operation
3.EC (Electronically Commutated) fan
• Modulating capacity control microprocessor
Accessories
• AER485P1: RS-485 interface for supervision • GP: Protective grille. Condenser coil external
• AVX: Spring anti-vibration mounts. For comFactory fitted.
patibility of the AVX mounts refer to the tech- • PTW: Remote control of the chiller operating
nical manual.
functions.
only.
212
system
• LCD user interface: colour touch-screen with
simple and intuitive graphical menu
• Compact sizes
✔
✔
✔
✔
✔
1401
✔
✔
1801
✔
2001
✔
2302
✔
2502
✔
✔
✔
✔
2652
✔
2802
✔
3202
✔
✔
✔
3502
✔
3702
✔
3802
✔
✔
4102
✔
✔
✔
✔
✔
1401
✔
✔
✔
1801
✔
✔
✔
2001
✔
✔
✔
2302
✔
✔
✔
2502
✔
✔
✔
2652
✔
✔
✔
2802
✔
✔
✔
3202
✔
✔
✔
3502
✔
✔
✔
3702
✔
✔
✔
✔
3802
✔
✔
✔
✔
4102
✔
✔
1401
✔
1801
✔
2001
✔
2302
✔
2502
✔
2652
✔
2802
✔
3202
✔
3502
✔
3702
✔
3802
✔
4102
✔
Note:
The number in brackets (x2) indicates the quantity to order.
(1) Accessory only factory fitted.
Unit Configurator
Combinando opportunamente le numerose opzioni disponibili, è possibile configurare ciascun modello in modo tale da soddisfare le più specifiche
esigenze impiantistiche.
123
4 5 6 7
8
9
10
11
12
|||||||
Code
|
Model
|Condenser coil|
|
|||
Power supply
SizeVersion Fan
Code:
TBX
Size:
1401, 1801, 2001, 2302, 2502, 2652, 2802, 3202, 3502, 3702,
3802, 4102
Model:
° - Cooling only, with evaporator to PED regulations
Version:
° - Standard
L - Standard low noise
A - High efficiency
Condenser coil:
° - Aluminium
R - Copper
S - Tinned copper
Fan:
° - Standard
I - EC (Electronically Commutated)
standard on ”A” and “E” Versions
Power supply:
Note:
– Electronic expansion valve standard
213
Technical Data
Dimensions (mm)
1401 1801 2001
kW
287 368,3 407,3
kW
258,8 342,8 392,1
Cooling capacity
kW
286,8 370,7 415,5
kW
265,2 354,8 406,4
kW
91,8 117,2 129,3
kW
88,9 117,9 134,7
Total input power
kW
86
110,9 124,8
kW
84,8 113,6 130,2
49536 63468 70176
l/h
l/h
44646 59065 67577
l/h
49536 63984 71724
l/h
45790 61229 70176
kPa
36
17
15
kPa
30
15
19
Evaporator pressure drop
kPa
50
41
43
kPa
44
38
49
W/W
3,13
3,14
3,15
W/W
2,91
2,91
2,91
EER
W/W
3,33
3,34
3,33
W/W
3,13
3,12
3,12
W/W
4,82
4,92
4,95
W/W
4,69
4,77
4,76
ESEER
W/W
5,01
5,06
5,04
W/W
4,85
4,89
4,82
Power supply
V/ph/Hz
°
A
147
195
216
L
A
144
198
225
Total input current
A
A
134
179
200
E
A
132
176
209
°
A
153
234
240
L
A
153
234
240
Maximum input current (FLA)
A
A
159
242
250
E
A
159
242
250
°
A
24
30
36
L
A
24
30
36
Maximum starting current (LRA)
A
A
30
38
46
E
A
30
38
46
A
Capacity modulation
A
30-100 30-100 30-100
type
Compressor
n°
1
1
1
Refrigerant
type
Refrigerant circuit
n°
1
1
1
94200 132800 166000
°|A
m3/h
Air flow rate
L|E
m3/h
69720 92960 116200
°|L
type
A|E
type
Fan
L|E
type
6
8
10
°|A
type
6
8
10
type
Evaporator
n°
1
1
1
Maximum external air
°C
42
42
42
temperature
°|A
dB(A)
88
89
90
Sound power
L
dB(A)
83
84
85
E
dB(A)
81
82
83
°|A
dB(A)
56
57
58
Sound pressure
L
dB(A)
51
52
53
E
dB(A)
49
50
51
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
°
L
A
E
2302
469,3
435,7
460,4
441,2
149
149,6
138,1
141,2
80840
75047
79464
76141
15
13
44
40
3,15
2,91
3,33
3,13
5,12
4,97
5,33
5,15
2502
509,2
463,9
502,2
473,6
161,4
159,3
150,4
152,2
87720
79911
86688
81755
15
15
44
46
3,16
2,91
3,34
3,11
5,14
4,97
5,35
5,13
2652 2802 3202*
545,2 587,2 669,1
518,3 543,2 595
538,1 594,1 667,8
532,5 556
614
173 184,9 212,2
177,5 186,2 203,8
161,1 177,3 199,7
170,3 177 196,9
93912 101136 115240
89292 93568 102495
92880 102512 115240
91931 95976 105966
15
14
15
16
15
15
44
41
43
48
46
44
3,15
3,18
3,15
2,92
2,92
2,92
3,34
3,35
3,34
3,13
3,14
3,12
5,13
5,18
5,14
4,96
5,00
4,97
5,35
5,38
5,37
5,13
5,15
5,16
400V/3/50Hz
242
260
280
299
355
244
258
287
308
345
217
235
251
276
322
221
238
265
275
320
300
300
306
312
462
300
300
306
312
462
310
310
318
326
476
310
310
318
326
476
171
171
177
183
258
171
171
177
183
258
181
181
189
197
272
181
181
189
197
272
stepless
15-100 15-100 15-100 15-100 15-100
centrifugal inverter oil-free
2
2
2
2
2
R134a
1
1
1
1
1
166000 157000 199200 232400 232400
116200 109900 139440 162680 162680
axial
Axial EC (Electronically Commutated)
10
10
12
14
14
10
10
12
14
14
flooded shell & tube
1
1
1
1
1
3502*
736
635,3
739,5
650,4
233,3
217,7
220,8
207,8
126764
109444
127624
112282
16
17
45
49
3,15
2,92
3,35
3,13
5,14
4,97
5,37
5,14
3702*
780,9
687,8
793,3
707,4
247,4
236,3
237,3
226,5
134504
118477
136912
122106
17
16
46
47
3,16
2,91
3,34
3,12
5,14
4,98
5,36
5,15
3802*
815,9
742,3
831,2
768,4
258,8
255
248,4
246,1
140524
127858
143448
132633
15
16
45
48
3,15
2,91
3,35
3,12
5,15
4,97
5,37
5,15
4102*
844,8
784,6
861
813,1
268,2
269
258,1
260,1
145512
135154
148608
140352
16
17
48
48
3,15
2,92
3,34
3,13
5,14
4,96
5,34
5,14
389
366
355
337
468
462
484
476
264
258
280
272
412
396
382
366
474
468
492
484
270
264
288
280
431
426
399
396
480
474
500
492
276
270
296
288
447
449
413
417
480
480
500
500
276
276
296
296
2
2
2
214
12°C
7°C
35°C
mm
mm
mm
mm
1401
2.450
2.200
3.780
3.780
1801
2.450
2.200
4.770
4.770
2001
2.450
2.200
5.750
5.750
2302
2.450
2.200
5.750
5.750
2502
2.450
2.200
5.750
5.750
2652
2.450
2.200
7.160
7.160
2802
2.450
2.200
8.150
8.150
3202
2.450
2.200
8.150
8.150
3502 3702 3802
2.450 2.450 2.450
2.200 2.200 2.200
9.140 10.120 11.100
8.150 9.140 10.120
4102
2.450
2.200
11.100
11.100
2
1
1
1
1
265600 298800 332000 314000
153860 185920 209160 232400
16
14
18
16
20
18
20
20
1
1
1
1
42
42
42
42
42
42
42
42
42
90
85
83
58
53
51
90
85
83
58
53
51
91
86
84
58
53
51
92
87
85
59
54
52
92
87
85
59
54
52
93
87
85
60
54
52
93
88
86
60
55
53
93
88
86
60
55
53
93
88
86
60
55
53
Sound power:
Aermec determines the value of sound power on the
basis of measurements made in accordance with ISO
Length
All
All
°|A
L|E
15-100 15-100 15-100 15-100
* Unit not EUROVENT certified
Data in accordance with EN14511-2:2011
Cooling
Entering water temperature
Leaving water temperature
External air temperature Model. TBX
Height A
Width B
Sound pressure:
Measured in free field over a reflective plane
(directivity factor Q = 2), at a distance of 10 metres
from the outer surface of the unit, in accordance with
ISO 3744.
Cod.: STBXUY.01 / 1202
Mod. TBX
Technical data
IDROBLOC
IDROBLOC
Cooling capacity
Total input power*
Input current*
Air cooled chiller with axial fan
R407C
Effective head
Heating capacity
Total input power*
Input current*
IDROBLOC® is a low-consumption water chiller
assembly designed for outdoor installation, sized to
provide a water flow sufficient to run a relatively
high number of terminal units. The thermal head of
water to the evaporator can be contained to 2.5°C;
in practical terms, this means that the system can
run fancoils in all rooms, though only operating the
ones located in rooms that are occupied. The user
can select which of the fancoils installed are to be
activated, simply by turning individual units on or
off, without ever having to adjust the water distribution circuit.
IDROBLOC® may be installed on the ground or
wall-mounted. With a size similar to that of regular
outdoor water boilers, the IDROBLOC® is perfectly suited for new or restructured domestic
applications.
e Sound pressure
Total air flow rate
Peak current (compressor)
Pump speed
Water connections (female Gas)
3
3,5
1,5
7,3
600
2000
69
32
33,5
1200
1
3H
3,2
1,5
7,3
550
2000
69
59
3,85
1,45
7,2
660
2000
67
55
33,5
1200
1
5
6,7
2,8
13,2
1150
2000
58
26
39
2300
1
5H
6,7
2,9
13,8
1150
2000
58
26
7,8
3,1
14,7
1340
2000
56
26
39
2300
1
33,5
25
1
3
3/4”
1/2”
33,5
25
1
3
3/4”
1/2”
75
25
2
3
3/4”
1/2”
75
25
2
3
3/4”
1/2”
IDROBLOC®
IDROBLOC H®
Features
• Unit for roof-hanging or floor-standing installation with brackets supplied (only for
IDROBLOC and IDROBLOC H)
• All versions are supplied for use with R407C
• Cooling only and heat pump version
• Compact dimensions
• Helical fan unit with axial delivery
• Evaporator dimensioned for working with ∆t
= 2.5 °C
Effective head
kW
kW
A
l/h (nominal)
l/h (max.)
kPa (nominal)
kPa (max.)
kW
kW
A
l/h (nominal)
l/h (max.)
kPa (nominal)
kPa (max.)
dB (A)
m3/h
Compressors
type
A
l
l
n.
ø (installation)
ø (heating)
• Antifreeze electric heater for the storage tank
environments, keeping in operation only
• Hydraulic circuit complete with pump,
those relative to rooms that are occupied
expansion tank, storage tank, water filter, flow • Electric power used within the standard
switch and safety valve
domestic availability limits
• Adjustment and control fully electronic with • Extreme simplicity of installation
microprocessor card
• Pre-arrangement for coupling with boiler,
with immediate seasonal switching
• Possibility of powering the fan coils of all the
 Sound pressure measured in free field conditions at distance of 10 m
and direction factor = 2.
Cooling:
- ambient air temperature 35 °C
- ∆t = 5 °C.
Riscaldamento:
- ambient air temperature 7 °C D.B., 6 °C W.B.;.;
- ∆t = 5 °C.
* = included the absorption of the circulation pump
Dimensions (mm)
Accessories
• DCPX: (only for IDROBLOC) Low temperatuand off, signalling of alarms and season chancable up to 150 m.
re device for correct cooling mode operation
geover). Can be made remote with shielded • SDP: Electronic card for using PR3 accessory
with ambient temperatures from less than
cable up to 30 m.
up to a distance of 150 m.
20°C down to - 10°C.
• PRD1: Smart remote panel. Repeats at a • VT7: Anti-vibration mounts.
• PR3: Simplified remote panel. Allows basic
machine checks to be carried out (turning on
machine. Can be made remote with shielded
IDROBLOC
3-5
3H-5H
DCPX 42
PR 3
PRD 1
SDP
✔
✔
✔
✔
VT 7
✔
✔
✔
✔
✔
Installation
IDROBLOC® is quick and simple to install: simply position the unit, then make all water and electrical connections.
The unit can be connected to any type of heating assembly: autonomous or centralised boiler, or district (remote) heating systems.
IDROBLOC
Height
Width
Depth
Weight
IDROBLOC® Free-standing
INDIPENDENT
HEATING SYSTEM
3
990
450
450
79
3H
990
450
450
80
5
1063
606
563
116
5H
1063
606
563
119
CENTRALIZED
HEATING SYSTEM
Cod.: SIDBUY.04 / 0709
DISTRICT HEATING
SYSTEM
A
B
C
Kg
IDROBLOC® Wall-mounted
216
217
Technical data
IDROBLOC C
Air cooled chiller with radial fan
R407C
IDROBLOC
Cooling capacity
Total input power*
Input current*
Effective pressure
e Sound pressure
Total air flow rate (duct 900 mm)**
Effective static pressure
Compressors
IDROBLOC C is a low-consumption water chiller assembly designed for outdoor installation,
sized to provide a water flow sufficient to run a relatively high number of terminal units. The thermal head of water to the evaporator can be contained to 2.5°C; in practical terms, this means that
the system can run fancoils in all rooms, though only operating the ones located in rooms that are
occupied. The user can select which of the fancoils installed are to be activated, simply by turning
individual units on or off, without ever having to adjust the water distribution circuit.
It is possible to canalise the air delivery outwards by removing the grille for installation with free
delivery.
IDROBLOC C must be floor-mounted and has similar dimensions to those of a normal boiler for
outside installation.
IDROBLOC C is especially suitable for domestic use in new or renovated buildings.
Peak current (compressor)
Pump speed
Water connections (female Gas)
3C
3.5
1.74
8.2
602
66
41
1150
20
1
Rotary
33.5
17
2
3
3/4” F Gas
1/2” F Gas
kW
kW
A
l/h (nominal)
kPa (max.)
dB (A)
n.
type
A
l
l
n.
ø (installation)
ø (heating)
5C
6.8
3.25
14.8
1170
58
42
2500
50
1
Scroll
75
17
2
3
3/4” F Gas
1/2” F Gas
8C
8.2
3.85
19
1410
52
45
3000
50
1
Scroll
103
17
2
3
3/4” F Gas
1/2” F Gas
 Sound pressure measured in free field conditions at distance of 10 m
and direction factor = 2.
Cooling:
- ambient air temperature 35 °C;
- ∆t = 5 °C.
* = including circulator pump power consumption
** = with 900 mm channel without protection grille
Features
• Unit for roof-hanging installation
• Centrifugal fan with vertical air delivery for
possible ducted installation
• Evaporator dimensioned for working with ∆t
= 2.5 °C
• Antifreeze electric heater for the plate heat
exchanger (as standard)
• Antifreeze electric heater for the storage tank
(RA accessory)
• Adjustment and control fully electronic with
microprocessor card
• Pre-arrangement for coupling with boiler,
with immediate seasonal switching
• Hydraulic circuit complete with pump,
expansion tank, storage tank, water filter, flow
switch and safety valve
• Possibility of powering the fan coils of all the
environments, keeping in operation only
those relative to rooms that are occupied
• Electric power used within the standard
domestic availability limits
• Extreme simplicity of installation
• Metallic protective cabinet with rustproof
polyester paint
• Color RAL 9002
Accessories
• PR3: Simplified remote panel. Allows basic • PRD1: Smart remote panel. Repeats at a • RA: Antifreeze electric heater for the storage
machine checks to be carried out (turning on
tank. It must be factory-mounted.
and off, signalling of alarms and season chanmachine. Can be made remote with shielded • SDP: Electronic card for using PR3 accessory
geover). Can be made remote with shielded
cable up to 150 m.
up to a distance of 150 m.
cable up to 30 m.
• VT7: Anti-vibration mounts.
IDROBLOC
3C - 5C - 8C
PR3
✔
PRD1
RA
✔
✔
SDP
✔
VT 7
✔
Dimensions (mm)
Installation
IDROBLOC C is quick and simple to install: simply position the unit, then make all water and electrical connections.
The unit can be connected to any type of heating assembly: autonomous or centralised boiler, or district (remote) heating systems.
Ducted air
delivery
IDROBLOC
Height
Width
Depth
Weight
218
A
B
C
Kg
3C
1118
606
572
110
5C
1118
606
572
128
Cod.: SIDBCUY.00 / 0709
No duct air
delivery
8C
1145
710
590
144
219
Technical data
Venice
Mod. Venice
Cooling capacity
Total input power*
Input current
Effective pressure to the installation circuit
Condenser water consumption
Condenser pressure drop
Condenser water consumption (16 °C)
Condenser water pressure drops (16 °C)
Heating capacity
Total input power*
Input current
Condenser water flow rate
Effective pressure to the installation circuit
Evaporator water consumption (10 °C)
e Sound pressure
Water connections**
Capacity of storage tank
Compressor
Max. current
Peak current
Water-cooled reversible heat pumps units
With capacities from 6.9 up to 9.7 kW
R407C
Aermec
participates in the EUROVENT
Program LCP / W / P / C
The products of interest can be
found on the website
kW
kW
A
l/h
kPa
l/h
kPa
l/h
kPa
kW
kW
A
l/h
kPa
l/h
kPa
dB(A)
Ø
l
Type
A
A
20
6,9
2,0
9,4
1190
63
1500
17,5
400
1,5
48
1”
23
Scroll
15
61
20 H
6,9
2,0
9,4
1190
63
1500
6,2
400
1,5
7,8
2,7
12,6
1340
61
900
2,2
48
1”
23
Scroll
15
61
25
8,2
2,3
11,1
1410
61
1780
13,4
470
1,2
48,5
1”
23
Scroll
18
76
25 H
8,2
2,3
11,1
1410
61
1780
6,1
470
1,2
9,3
3,2
14,9
1600
59
1080
2,2
48,5
1”
23
Scroll
18
76
30
9,7
2,7
13,0
1670
59
2100
11,7
560
1,6
49
1”
23
Scroll
24
100
30 H
9,7
2,7
13,0
1670
59
2100
6,3
560
1,6
10,9
3,7
17,5
1880
57
1270
2,3
49
1”
23
Scroll
24
100
Power supply = 1~ 230V 50Hz.
conditions:
e Sound pressure measured in an 85 m3
semi-reverberant test chamber with
reverberation time Tr = 0.5s.
-
Features
• Versions:
Venice: cooling only
Venice H: heat pump
• Cycle reversal on refrigerant circuit
• All versions are equipped with circulation
pump, water tank, water filter and safety
valve
• Complies with EEC Safety Directive (CE)
• Differential pressure switch on the external
circuit standard on heat pumps
• Fluxostat standard on installation circuit
• Modular microprocessor control system
• Straightforward intuitive control panel
• High efficiency plate type heat exchangers
• Compact size
polyester paint
• Degree of protection IP 24
Cooling
processed water temperature 7 °C;
water inlet temperature to condenser 30 °C;
Dt = 5 °C.
*
**
Heating
processed water temperature 50 °C;
water inlet temperature to evaporator 10 °C;
Dt = 5 °C.
including circulator pump power consumption.
male Gas connection.
Dimensions (mm)
Accessories
Mod. Venice
20
20 H
25
25 H
30
30 H
PR 3
✔
✔
✔
✔
✔
✔
VP 14
✔
VP 15
VPH 10
VPH 11
✔
✔
✔
✔
✔
VT 7
✔
✔
✔
✔
✔
✔
VT M
✔
✔
✔
✔
✔
✔
Mod. Venice
20
25 - 30
mm
mm
A
504
504
B
404
404
C
625
625
D
190
190
E
83
83
F
20
20
G
48
48
H
465,5
465,5
I
20
20
L
25
25
Mod. Venice
20
25 - 30
mm
mm
M
130
130
N
40
40
O
20
20
P
118
118
Q
77
77
R
304
304
S
249
249
T
120
120
U
220
220
V
111
111
Mod. Venice
Peso [Kg]
220
Venice
Venice H
20
100
103
25
103
106
30
105
109
Cod.: SVNCUY.03 / 1202
• PR3: Remote control panel with ON/OFF,
ser, thereby maintaining the condensation
the water flows through both branches of the
operating mode selection (cooling / heating)
temperature unchanged.
circuit.
and general alarm indication.
• VPH: Pressure switch valve with bypass sole- • VT: Rubber anti-vibration mounts.
• VP: Pressure switch valve complete with connoid valve: during cooling mode operation • VT M: Spring anti-vibration mounts.
nections, piloted directly in relation to conthe bypass valve is closed so the water flows
densation pressure; the valve modulates the
exclusively through the circuit with the presvolume of water needed to cool the condensure switch. During heating mode operation
NEW
Accessories
WRL
Water-cooled chillers
DISPLAY
MODU_CONTROL
• VT: Anti-vibration mounts: four anti-vibration
mounts to be installed under the unit's steel
base.
• KSAE: External air sensor. Temperature sensor
with plastic enclosure.
• PR3: Simplified remote panel. Allows control
of the basic unit functions and alarm notification. Remote mounted up to 150 m distance with a shielded cable.
• MODU-485A: RS-485 interface for supervising systems with MODBUS protocol.
050
070
025
030
040
080
100
140
160
VT
9
9
9
9
9
9
15
15
15
KSAE
✔
✔
✔
✔
✔
✔
✔
✔
✔
PR3
✔
✔
✔
✔
✔
✔
✔
✔
✔
WRL
KSAE
External air sensor
ACCESSORY
MODU-485A
✔
✔
✔
✔
✔
✔
✔
✔
✔
AERWEB300
✔
✔
✔
✔
✔
✔
✔
✔
✔
Unit Configurator
•HIGH EFFICIENCIES
•OPTION FOR:
DESUPERHEATER
•SUITABLE FOR GEOTHERMAL APPLICATIONS
PR3
Simplified remote panel
ACCESSORY
High efficiency
Aermec has designed these units to optimise
heat pump operation, providing high performances and low energy consumption.
Connections
The electric and hydraulic connections are all
located on the upper part of the unit
facilitating installation and maintenance. This
allows reduced plant room space and installation in the smallest space possible.
"KSAE" (accessory). the heat pump unit can vary • Compressors with high performance and low
the leaving water temperature based on climatic
electrical input
conditions, thus increasing the energy efficiency • Differential pressure switch standard (on
of the system.
evaporator side)
• Conforms with Safety Directives (CE) and the
Advantages
standards regarding electromagnetic
Using the latest innovative technology and focus
compatibility
on maximum quality gives the WRL series the The safety of the unit is provided by the door
maximum energy efficiency, ease of installation,
interlocked isolator and active protection of
and most versatile application using renewable
the main components
energy sources.
• Latest generation of electronic controller
• Control circuit board (Modu control)
Range
• "PR3" simplified remote panel (ACCESSORY)
Available in 9 sizes.
• Compatible with the (VMF) system except for
domestic hot water production.
Models
• WRL ° (cooling only)
• WRL E (evaporating unit), ships with holding
charge only.
Silent
The WRL units are distinguished for their silence Versions
in operation. Careful soundproofing of the unit
• WRL-° (standard without buffer tank)
with suitable sound-absorbent material results in • WRL-A (with buffer tank)
low sound levels for all units.
Technical features
Dynamic set point
• Structure and base in hot dip galvanised sheet
Using the latest generation of electronic controlsteel with epoxy paint finish (RAL 9002)
ler and with an external air temperature sensor • Generously sized plate heat exchangers
222
CODE:
WRL
SIZE:
025 - 030 - 040 - 050 - 070 - 080 - 100 - 140 - 160
FIELD OF USE:
° - Standard with leaving water down to +4 °C
Y - Low temperature with leaving liquid down to -8 °C
Characteristics
WRL is the range of water cooled chillers
operating with refrigerant R410A. They are internal units with hermetic scroll compressors that
respond perfectly to the market
requirements: small dimensions, ease of installation, low noise.
1 2 3
456
7
8
9
10
11
12
13
14
15
||||||||||
|
Code|
Field of use
|
Version
| Geothermal side |
Field |
Power supply
|||
pump kit
|
not used
|
Size
Model
Heat recovery
System side
Soft start
pump kit
Model:
° - Cooling only
E - Evaporating unit (shipped with holding charge only)
VERSION:
° - Standard
A - With buffer tank
HEAT RECOVERY:
D - Desuperheater
SYSTEM SIDE PUMP KIT:
Standard version “°”
° - Without pump
P - 3 speed ON-OFF PUMP (UP TO MODEL WRL 080)
Single speed three-phase STANDARD PUMP (WRL 100-140-160
MODELS)
N - Single speed three-phase HIGH HEAD PUMP
(WRL 100-140-160 MODELS)
FIELD NOT USED
°
Soft-start:
° - Without Soft-start
S - With Soft-start
POWER SUPPLY:
° - 400V 3N~ 50Hz
M - 230V ~ 50Hz (only for models WRL 025 - 030 - 040)
GEOTHERMAL SIDE PUMP KIT VERSION “°”:
° - Without pump
Geothermal applications
B - 3 speed PUMP ON-OFF (UP TO MODEL WRL 080)
Single speed three-phase STANDARD PUMP (WRL 100-140-160 MODELS)
U - Single speed three-phase HIGH HEAD PUMP (WRL 100-140-160 MODELS)
F - Pump with phase cut control (MODELS UP TO WRL 080)
I - Inverter Pump (MODELS UP TO WRL 080)
Applications with bore hole water
V - 2-way modulating valve
Configuration example:
wrl050Y°°°°°°S°
223
Technical Data
Dimensions (mm)
WRL Model
Cooling capacity
Input power
Input current
E.E.R.
ESEER
Evaporator water
flow rate
Pressure drop
(system side) “°”
Water consumption
(geothermal side)
Pressure drop
(geothermal side)
Compressor
N° circuits/N° compressors
Capacity control
Evaporator
Quantity
Condenser
Quantity
Buffer tank
Tank capacity
Expansion vessel
WRL with pump only
WRL pump and buffer tank
Sound data
Sound power
Sound pressure**
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
kW
A
W/W
l/h
kPa
l/h
kPa
030
8,3
8,4
1,78
1,70
9,2
2,6
4,66
4,94
5,19
5,53
040
11,3
11,3
2,50
2,42
11,7
4,9
4,52
4,69
5,17
5,33
050
14,7
3,05
6,4
4,82
5,34
070
19,2
3,93
7,4
4,90
5,39
080
21,8
4,59
9,1
4,75
5,28
100
29,4
6,09
12,8
4,83
5,74
140
38,4
7,84
14,8
4,90
5,81
160
43,7
9,17
18,2
4,77
5,66
1140
1150
1430
1450
1940
1940
-
-
-
-
-
15
15
1390
17
17
23
23
2530
21
3300
26
3750
5060
25
6600
34
7510
38
1390
1740
1750
2370
-
29
30
3050
32
3970
28
28
2360
36
35
12 °C
7 °C
30
-
-
-
-
4540
46
6100
42
7950
57
9090
66
40
SCROLL
1/1
1/1
1/1
1/1
1/2
1/2
1/2
0 - 100
0 - 100
0 - 100
0 - 100
0 - 50 - 100 0 - 50 - 100 0 - 50 - 100
PLATES
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
1
1
1
1
1
1
1
PLATES
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
1
1
1
1
1
1
1
Only for units with buffer tank / buffer tank and pumps
100
100
100
100
150
150
150
%
1/1
0 - 100
1/1
0 - 100
ø
n°
F / 1"/14
1
F / 1"/14
1
ø
n°
F / 1"/14
1
F / 1"/14
1
l
100
100
n°/l
n°/l
1/2
1/8
1/2
1/8
1/2
1/8
1/2
1/8
1/2
1/8
1/2
1/8
1/8
1/8
1/8
1/8
1/8
1/8
dB(A)
dB(A)
55,5
24,3
57,0
25,8
57,5
26,3
59,0
27,7
60,0
28,7
60,5
29,2
62,0
30,6
63,0
31,6
63,5
32,1
Sound power
Aermec determines the sound power value
on the basis of measurements taken in
accordance with standard 9614-2, in compliance with the Eurovent certification.
Cooling:
Evaporator
Inlet temperature Outlet temperature Condenser
Inlet temperature Outlet temperature kW
025
6,6
6,7
1,47
1,43
7,2
3,1
4,49
4,69
4,96
5,22
A
A
A
C
B
C
WRL 025-040
WRL
Height (A)
Width (B)
Depth (C)
Weight WRL°
Weight WRLE
mm
mm
mm
kg
kg
B
B
C
WRL 050-080
025
976
607
628
120
110
030
976
607
628
125
115
040
976
607
628
130
125
WRL 100-160
050
1126
607
798
150
150
070
1126
607
798
170
150
080
1126
607
798
180
150
100
1126
1157
798
260
245
140
1126
1157
798
270
250
160
1126
1157
798
280
250
100
1.126
1.757
798
340
140
1.126
1.757
798
350
160
1.126
1.757
798
360
** Sound pressure
in an unrestricted range on a refl ective
plane (directional fact. Q=2), 10m away
from the unit external surface, complying
with ISO 3744.
A
A
30 °C
35 °C
B
Technical Data “E”
B
C
C
WRL-E Model
Cooling capacity
Input power
Input current
E.E.R.
Evaporator flow rate
Pressure drop
evaporator side “°”
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
230V-1
400V-3
kW
kW
A
l/h
kPa
025E
6,2
6,3
1,7
1,7
8,3
3,4
3,56
3,70
1070
1080
13
13
030E
7,8
7,8
2,1
2,0
10,5
3,2
3,65
3,87
1340
1340
15
15
040E
10,4
10,4
2,9
2,8
12,8
5,4
3,63
3,75
1790
1790
20
20
050E
13,4
3,6
7,2
3,73
2300
18
070E
17,4
4,5
8,3
3,83
2980
21
080E
19,7
5,3
10,2
3,71
3390
24
100E
26,8
7,2
14,3
3,73
4600
21
140E
34,7
9,1
16,6
3,83
5970
28
160E
39,4
10,6
20,5
3,71
6770
31
WRL-A 025-080
WRL-A
Height (A)
Width (B)
Depth (C)
Weight *
mm
mm
mm
Kg
025
1.126
1.157
798
190
030
1.126
1.157
798
200
WRL-A 100-160
040
1.126
1.157
798
210
050
1.126
1.157
798
230
070
1.126
1.157
798
250
080
1.126
1.157
798
260
* Weight with two heat exchangers and buffer tank without pumps.
Condensing temperature
224
Code : SWRLUY.02 / 1201
Cooling:
45°C
7°C; ∆t 5°C
225
Accessories
WRL
R410A
Water-cooled reversible chillers
for the production of hot water up to 55 °C
Heating capacity from 53 to 187 kW
base.
•STA: Room temperature sensor, 230 Vac
recess mounted kit containing the ambient
sensor with display and control knob, able to
control an ON-OFF valve or a zone pump.
•STH: Room temperature and humidity sensor,
230 Vac recess mounted kit containing the
control an ON-OFF valve or a zone pump
and dehumidifier enable.
• SSM: Sensor to be used together with the
• VMFCRP: WRL Zones Control can control up
mixing valve in applications with radiant panto a maximum of 3 zones with the following
els. Accessory to be requested together with
modes:
the VMFCRP zone accessory.
- Zone 1: Controlled as standard with the lat• S...I: System buffer tanks: available in sizes
est generation electronic controller. The
200, 300, 400 and 500 litres (S200I, S300I,
"SSM" clamp on sensor (accessory) is recomS400I and S500I).
mended to control the flow temperature.
• PGD1: Simplified remote panel. Allows control - The control of the remaining Zone 2 and
Zone 3 is possible using the VMFCRP + SSM
accessories for each zone.
TWISTED PAIR SCREENED cable and
TCONN6J000.
WRL
PGD1
Simplified remote panel.
ACCESSORY
•POSSIBILITY OF HAVING:
PARTIAL HEAT RECOVERY
Characteristics
operating with refrigerant R410A. They are internal units with hermetic scroll compressors that
respond perfectly to the market
Dynamic set point
Using the latest generation of electronic controller and with an external air temperature sensor
(accessory), the heat pump unit can vary the
leaving water temperature based on climatic
conditions, thus increasing the energy efficiency
of the system.
High efficiency
Aermec has designed these units to optimise Advantages
heat pump operation, providing high perfor- Using the latest innovative technology and focus
mances and low energy consumption.
on maximum quality gives the WRL series the
maximum energy efficiency, ease of installation,
Connections
and most versatile application using renewable
The electric and hydraulic connections are all energy sources.
facilitating installation and maintenance. This Range
allows reduced plant room space and installa- Available in 8 sizes:
tion in the smallest space possible.
• Water-side reversible system
Silent
The WRL units are distinguished for their silence
in operation. Careful soundproofing of the unit
with suitable sound-absorbent material results
in low sound levels for all units.
226
Version
• WRL°= Cooling only: reversible water-side
Technical features
steel with epoxy paint finish (RAL 9002)
• Generously sized plate heat exchangers
• Compressors with high performance and low
electrical input
• Flow switch as standard
compatibility
The safety of the unit is provided by the door
the main components
• Externally mounted user interface with display of all operating parameters in 4 languages
• User-friendly remote mounted control panel
with alarm notification.
180
200
300
400
500
550
600
AER485P1
✔
✔
✔
✔
✔
✔
✔
650
✔
VT
9
9
9
9
15
15
15
15
STA
✔
✔
✔
✔
✔
✔
✔
✔
STH
✔
✔
✔
✔
✔
✔
✔
✔
SSM
✔
✔
✔
✔
✔
✔
✔
✔
S...I (200-300-400-500)
✔
✔
✔
✔
✔
✔
✔
✔
PGD1
✔
✔
✔
✔
✔
✔
✔
✔
KSAE
✔
✔
✔
✔
✔
✔
✔
✔
VMFCRP
✔
✔
✔
✔
✔
✔
✔
✔
Unit Configurator
1 2 3
456
7
8
9
10
11
12
13
14
15
||||||||||
|
Code|
Field of use
|
Version
|
Pumps |
Field |
Power supply
|||
(condenser side)
|
not used
|
Size
Model
Heat Pumps Soft start
recovery
(evaporator side)
CODE:
WRL
SIZE:
180 - 200 - 300 - 400 - 500 - 550 - 600 - 650
FIELD OF USE:
° - Standard with leaving water above +4°C Y - Low temperature with leaving liquid down to -8°C X - Electronic expansion valve with leaving liquid down to +4°C
(for different temperature contact us)
MODEL:
° - Reversible water-side
E - Evaporating unit (not available for heat pump versions)
(shipped with holding charge only)
VERSION:
° - Standard
HEAT RECOVERY
D - Desuperheater
PUMPS (CONDENSER SIDE)
° - Without pump
B - Low static pressure pump
U - High static pressure pump
F - Low static pressure inverter pump
I - High static pressure inverter pump
PUMPS (EVAPORATOR SIDE)
° - Without pump
P - Low static pressure pump
N - High static pressure pump
FIELD NOT USED
°
SOFT START
° - Without Soft Start
S - Soft Start
POWER SUPPLY
° - 400V-3N -50 Hz
5 - 500V-3-50Hz (only models WRL400-550-600-650)
227
Technical data
Dimensions (mm)
WRL Model
180
200
300
400
500
550
600
650
Cooling capacity
kW
49.6
64.0
74.1
85.4
99.5
128.8
149.1
167.6
Input power
kW
10.6
14.1
16.3
17.7
20.1
26.4
30.4
35.0
Input current
A
20.4
26.3
28.5
33.4
37.0
53.0
61.8
71.2
EER
-
4.66
4.55
4.55
4.82
4.96
4.88
4.91
4.78
l/h
8520
11010
12750
14680
17120
22150
25650
2883
kPa
27
45
45
65
31
48
54
65
l/h
10170
13190
15270
17430
20230
26230
30360
34250
kPa
29
49
60
85
31
50
56
69
Heating capacity
kW
52.9
71.6
78.8
92.6
105.2
145.2
166.5
187.2
Input power
kW
12.6
17.2
18.9
21.2
23.3
32.3
37.0
42.2
Input current
A
24.3
31.4
34.0
38.2
42.8
60.2
69.5
79.3
COP
-
4.18
4.16
4.16
4.38
4.51
4.49
4.51
4.44
l/h
9090
12310
13550
15930
18090
24980
28640
32200
kPa
22
37
45
64
27
47
54
67
l/h
11890
16080
17690
21100
24140
33300
38190
42780
kPa
50
82
81
118
60
104
117
144
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
Compressor
Capacity control
%
Evaporator
ø
2”
2”
2”
2”
2”½
2”½
2”½
2”½
Quantity
n°
1
1
1
1
1
1
1
1
Condenser
ø
2”
2”
2”
2”
2”½
2”½
2”½
2”½
Quantity
n°
1
1
1
1
1
1
1
1
ø
1”½
1”½
1”½
1”½
1”½
1”½
1”½
1”½
Quantity
n°
1
1
1
1
1
1
1
1
Desuperheater (optional)
PLATE
Expansion vessel (versions with pumps)
n°/l
1/8
1/8
1/8
1/8
1/12
1/12
1/12
1/12
61.1
61.8
62.9
71.1
67.6
79.1
79.1
79.1
29.1
29.8
30.9
39.1
35.6
47.1
47.1
47.1
Sound data
Sound power
C
WRL 180-400
WRL 500-650
PLATE
Sound pressure [**]
B
PLATE
Expansion vessel (per circuit)
B
C
SCROLL
A
A
dB(A)
dB(A)
WRL Model
Height (A)
Width (B)
Depth (C)
Weight empty WRL-°
Weight empty WRL-D
Weight empty WRL-E
mm
mm
mm
kg
kg
kg
180
1380
1320
845
375
383
346
200
1380
1320
845
375
383
346
300
1380
1320
845
381
389
351
400
1380
1320
845
388
396
358
500
1380
2009
845
518
528
460
550
1380
2009
845
594
604
536
600
1380
2009
845
670
681
615
650
1380
2009
845
715
726
660
Performance in accordance with EN 14511.
Sound power
Aermec determines the sound power value on the
basis of measurements taken in accordance with
standard 9614-2, in compliance with the Eurovent
certification.
[**] Sound pressure
in an unrestricted range on a refl ective plane (directional fact. Q=2), 10m away from the unit external
surface, complying with ISO 3744.
Heating:
Cooling:
Evaporator
Evaporator
Inlet temperature
Inlet temperature
12 °C
Outlet temperature
Outlet temperature
7 °C
10 °C
7 °C
Condenser
Condenser
Inlet temperature
30 °C
Inlet temperature
40 °C
Outlet temperature
35 °C
Outlet temperature
45 °C
Model WRL-E
Cooling capacity
kW
180
200
300
400
500
550
600
650
46.0
60.1
69.6
80.1
90.6
121.3
140.2
158.7
Input power
kW
12.4
16.0
18.5
19.8
23.1
29.6
34.1
38.5
Input current
A
22.9
28.5
32.4
35.6
41.8
55.8
64.8
73.9
EER
-
3.7
3.8
3.8
4.1
3.9
4.1
4.1
4.1
l/h
7900
10340
11980
13770
15580
20860
24110
27300
kPa
23
39
39
56
25
42
47
57
Discharge line
mm
28
28
28
28
35
35
35
35
Liquid line
mm
22
22
22
22
28
28
28
28
Code : SWRL2UY.03 / 1201
Technical data “WRL-E”
Cooling:
Condensing temperature
228
45°C
7°C; ∆t 5°C
229
Accessories
WRL-H
Water cooled reversible heat pumps for the
production of hot water up to 60 °C
base.
•STA: Room temperature sensor. 230 Vac
•STH: Room temperature and humidity sensor.
230 Vac recess mounted kit containing the
control an ON-OFF valve or a zone pump
and
WRL
AER485P1
VT (version H)
VT (version HA)
STA
STH
SSM
S...I (200-300-400-500)
PGD1
KSAE
VMFCRP
WRL
Aermec participates in the EUROVENT
Programme: LCP / W / P / C
The products of interest can be found
on the website
•HIGH EFFICIENCy
STA - STH
ACCESSORIes
TOTAL HEAT RECOVERY.
PRODUCTION OF HOT WATER USE UP TO 60 °c
PRIORITY PRODUCTION OF DHW
•suitable FOR GEOTHERMal APPLICATIONS
•REVERSIBLE REFRIGERANT side
High efficiency
Connections
Silent
The WRL units are distinguished for their
silence in operation. Careful soundproofing of
the unit with suitable sound-absorbent material
results in low sound levels for all units.
Priority production of domestic hot water
The unit guarantees the prioritised production
of DHW both in summer and winter. The
230
temperature of DHW produced depends on the
type of combination between the WRL heat
pump and associated DHW devices.
The heat pump unit is shipped with a
temperature sensor kit for the DHW tank.
Dynamic set point
Using the latest generation of electronic controller and with an external air temperature
sensor (accessory). the heat pump unit can vary
the leaving water temperature based on climatic
conditions, thus increasing the energy efficiency
of the system.
Advantages
Using the latest innovative technology and
focus on maximum quality gives the WRL series
the maximum energy efficiency, ease of installation, and most versatile application using
renewable energy sources.
Range
Available in 9 sizes with refrigerant side reversing.
Versions
• WRL H
• WRL HA
030
✔
9
9
✔
✔
✔
✔
✔
✔
✔
040
✔
9
9
✔
✔
✔
✔
✔
✔
✔
050
070
✔
✔
9
9
9
9
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
• VMFCRP: WRL Zones Control can control up
to a maximum of 3 zones with the following
modes:
- Zone 1: Controlled as standard with the latest generation electronic controller. The
"SSM" clamp on sensor (accessory) is recommended to control the flow temperature.
- The unit is shipped with a temperature sensor kit for the DHW tank.
- The control of the remaining Zone 2 and
080
✔
9
9
✔
✔
✔
✔
✔
✔
✔
100
✔
15
15A
✔
✔
✔
✔
✔
✔
✔
140
✔
15
15A
✔
✔
✔
✔
✔
✔
✔
160
✔
15
15A
✔
✔
✔
✔
✔
✔
✔
Unit Configurator
PGD1
ACCESSORIES
Characteristics
operating with refrigerant R410A. They are
internal units with hermetic scroll compressors
that respond perfectly to the market
025
✔
9
9
✔
✔
✔
✔
✔
✔
✔
dehumidifier enable.
mixing valve in applications with radiant panels. Accessory to be requested together with
the VMFCRP zone accessory.
• S...I: System buffer tanks: available in sizes
200, 300, 400 and 500 litres (S200I, S300I,
S400I and S500I).
TCONN6J000.
Technical features
• Structure and base in hot dip galvanised
sheet steel with epoxy paint finish (RAL
9002)
electrical input
• Pressostat as standard
• One temperature sensor kit for the DHW tank
compatibility.
the main components
1 2 3
456
7
8
9
10
11
12
13
14
15
|||||||||| |
Code|
Field of use
|
Version
| Geothermal side |
Heat recovery
|
Power supply
|||
pumps kit
|
pumps kit
|
Size
Model
Heat recovery
System side
Soft start
pump kit
CODE:
WRL
Size:
025 - 030 - 040 - 050 - 070 - 080 - 100 - 140 - 160
Field of use:
X - Electronic expansion valve with leaving liquid down to +4°C
Model:
H - Heat pump
Version:
° - Standard
A - With buffer tank
Heat recovery:
T - With total heat recovery FOR HEAT PUMP VERSIONS ONLY
Version "°/A" geothermal side pump kit:
° - Without pump
Geothermal applications
B - 3-SPEED PUMP ON-OFF (UP TO MODEL WRL 080)
Single speed three-phase STANDARD PUMP
(WRL 100-140-160 MODELS)
U - Single speed three-phase HIGH HEAD PUMP (WRL 100-140-160)
F - Pump with phase cut control (MODELS UP TO WRL 080)
I - Pump Inverter recommended for TOTAL HEAT RECOVERY
VERSIONS (MODELS UP TO WRL 080)
Applications with bore hole water
SYSTEM side pump kit:
Standard version “°”
° - Without pump
P - 3-speed PUMP ON-OFF (UP TO MODEL WRL 080)
(WRL 100-140-160 MODELS)
(WRL 100-140-160 MODELS)
Version “A”
° - Without pump
P - 3-speed PUMP ON-OFF (UP TO MODEL WRL 080)
(WRL 100-140-160 MODELS)
J - 3-speed HIGH HEAD PUMP ON-OFF
(MODELS WRL 025-030-040)
(MODELS WRL 050-070-080-100-140-160)
HEAT Recovery pump kit:
° - Without pump
Q -Pump
Soft-start:
° - Without Soft-start
S - With Soft-start
Power supply:
° - 400V 3N~ 50Hz
M - 230V ~ 50Hz (only for size WRL 025 - 030 - 040)
4- 230V~3~50Hz (only for size WRL 050-070-080-100-140-160)
231
WRL model
230V-1
kW
400V-3
230V-1
Input power
kW
400V-3
230V-1
Input current
A
400V-3
230V-1
E.E.R.
W/W
400V-3
230V-1
E.S.E.E.R.
400V-3
230V-1
Evap water flow rate
l/h
400V-3
Evap pressure drop
230V-1
kPa
400V-3
(system side)
230V-1
Cond water flow rate
l/h
400V-3
Cond pressure drop 230V-1
kPa
400V-3
(geothermal side)
230V-1
Heating capacity
kW
400V-3
230V-1
Input power
kW
400V-3
230V-1
Input current
A
400V-3
230V-1
C.O.P.
400V-3
230V-1
l/h
400V-3
kPa
400V-3
(system side)
230V-1
l/h
400V-3
Evap pressure drop 230V-1
kPa
400V-3
(geothermal side)
Cooling capacity
WRL model
230V-1
Cooling capacity
kW
400V-3
230V-1
Input power
kW
400V-3
230V-1
Input current
A
400V-3
230V-1
E.E.R.
W/W
400V-3
230V-1
l/h
400V-3
Evap pressure drop
230V-1
kPa
400V-3
(system side)
230V-1
l/h
400V-3
kPa
400V-3
(geothermal side)
230V-1
Heating capacity
kW
400V-3
230V-1
Input power
kW
400V-3
230V-1
Input current
A
400V-3
230V-1
C.O.P.
400V-3
230V-1
l/h
400V-3
kPa
400V-3
(system side)
230V-1
l/h
400V-3
Evap pressure drop 230V-1
kPa
400V-3
(geothermal side)
Performance in accordance
EN 14511.
232
025H
6,3
6,3
1,67
1,57
8,5
4,2
3,77
4,01
4,36
4,66
1090
1090
13
13
1370
1360
22
22
7,9
7,9
1,97
1,97
10,5
4,9
4,01
4,01
1355
1355
20
20
1370
1360
21
21
030H
7,9
8,1
1,90
1,81
10,8
3,8
4,16
4,49
4,85
5,24
1360
1400
15
16
1690
1700
22
23
10,0
9,5
2,48
2,31
13,1
4,9
4,02
4,12
1710
1630
22
20
1690
1700
23
23
040H
10,3
10,4
2,42
2,29
13,5
5,8
4,25
4,54
4,95
5,22
1780
1800
20
20
2190
2180
30
29
12,6
12,4
3,15
2,94
16,6
6,7
4,01
4,22
2165
2125
29
28
2190
2180
30
30
050H
13,7
3,03
7,2
4,54
5,2
2370
19
2890
29
16,4
3,91
8,5
4,20
2810
28
2890
28
070H
17,7
4,22
9,0
4,19
4,69
3055
22
3770
36
20,9
5,05
10,7
4,14
3580
32
3770
34
080H
20,2
4,95
10,2
4,08
4,56
3490
26
4325
41
24,1
5,90
12,2
4,09
4120
37
4325
40
100H
27,4
6,08
13,3
4,52
6,07
4740
22
5770
37
32,9
7,86
16,1
4,19
5630
35
5770
33
140H
35,3
8,45
16,7
4,18
5,56
6100
29
7525
48
41,9
10,12
20,7
4,14
7160
43
7525
43
160H
40,3
9,91
19,1
4,07
5,27
6970
33
8635
56
48,2
11,91
23,9
4,05
8220
51
8635
51
025HA
6,3
6,3
1,86
1,76
9,1
4,9
3,38
3,57
1.090
1.090
14
14
1.370
1.360
22
22
7,90
7,90
2,14
2,15
12,0
6,4
3,69
3,67
1.355
1.355
21
21
1.370
1.360
21
21
030HA
7,9
8,1
2,06
1,97
11,4
4,4
3,84
4,12
1.360
1.400
16
17
1.690
1.700
22
23
9,96
9,50
2,63
2,46
14,6
6,5
3,79
3,86
1.710
1.630
24
22
1.690
1.700
23
23
040HA
10,3
10,4
2,57
2,44
14,2
6,5
4,01
4,27
1.780
1.800
22
22
2.190
2.180
30
29
12,60
12,38
3,28
3,07
18,1
8,2
3,84
4,03
2.165
2.125
32
31
2.190
2.180
30
30
050HA
13,8
3,22
9,2
4,29
2.370
23
2.890
29
16,35
4,07
11,2
4,02
2.810
33
2.890
28
070HA
17,8
4,39
11,2
4,05
3.055
28
3.770
36
20,79
5,19
13,5
4,01
3.580
40
3.770
34
080HA
20,3
5,12
12,4
3,97
3.490
34
4.325
41
23,98
6,04
15,0
3,97
4.120
48
4.325
40
100HA
27,8
5,93
14,8
4,70
4.740
36
5.770
37
32,71
7,65
17,7
4,28
5.630
55
5.770
33
140HA
35,9
8,10
19,2
4,43
6.100
52
7.525
48
41,52
9,62
22,8
4,32
7.160
75
7.525
43
160HA
41,03
9,46
21,7
4,34
6.970
63
8.635
56
47,71
11,30
25,8
4,22
8.220
93
8.635
51
ATTENTION:
Please refer to the data of the HA
version for units with buffer tank and
pumps.
The technical data includes the input
power of the standard geothermal
and system side pumps.
Cooling:
Evaporator
Inlet temperature
12 °C
Outlet temperature
7 °C
Condenser
Inlet temperature
30 °C
Outlet temperature
35 °C
Heating:
Evaporator
Inlet temperature
10 °C
Outlet temperature
* °C
Condenser
Inlet temperature
40 °C
Outlet temperature
45 °C
WRLH- °/A Model
Compressor
N° circuits / N° compressors
Capacity control
Evaporator
Quantity
Condenser
Quantity
Buffer tank
Expansion vessel
WRLH with pump
WRLH pump and buffer tank
Sound data
Sound power
Sound pressure
025
030
040
070
080
100
SCROLL
1/1
1/1
1/1
1/1
1/2
0 - 100
0 - 100
0 - 100
0 - 100
0 - 50 - 100
Plate
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
1
1
1
1
1
Plate
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
F / 1"/14
1
1
1
1
1
Only for units with buffer tank / buffer tank-pump
100
100
100
100
150
n°/n°
%
1/1
0 - 100
1/1
0 - 100
ø
n°
F / 1"/14
1
F / 1"/14
1
ø
n°
F / 1"/14
1
F / 1"/14
1
l
100
100
n°/l
n°/l
1/2
1/8
1/2
1/8
1/2
1/8
1/2
1/8
1/2
1/8
1/2
1/8
dB(A)
dB(A)
55,5
24,3
57,0
25,8
57,5
26,3
59,0
27,7
60,0
28,7
60,5
29,2
Sound power
Aermec determines the sound power value on the basis of measurements taken in
accordance with standard 9614-2, in compliance with the Eurovent certification.
050
140
160
1/2
0 - 50 - 100
1/2
0 - 50 - 100
F / 1"/14
1
F / 1"/14
1
F / 1"/14
1
F / 1"/14
1
150
150
1/8
1/8
1/8
1/8
1/8
1/8
62,0
30,6
63,0
31,6
63,5
32,1
Sound pressure
in an unrestricted range on a refl ective plane (directional fact. Q=2), 10m away
from the unit external surface, complying with ISO 3744.
Dimensions (mm)
A
A
A
C
B
C
WRL 025-040
WRL
Height (A)
Width (B)
Depth (C)
Weight
mm
mm
mm
kg
025H
976
607
628
120
B
B
C
WRL 050-080
030H
976
607
628
125
040H
976
607
628
130
WRL 100-160
050H
1.126
607
798
150
070H
1.126
607
798
170
080H
1.126
607
798
180
100H
1.126
1.157
798
260
140H
1.126
1.157
798
270
160H
1.126
1.157
798
280
100HA
1.126
1.757
798
340
140HA
1.126
1.757
798
350
160HA
1.126
1.757
798
360
A
A
B
B
C
C
WRL 025-080
WRL
Height (A)
Width (B)
Depth (C)
Weight *
mm
mm
mm
Kg
025HA
1.126
1.157
798
190
030HA
1.126
1.157
798
200
WRL 100-160
040HA
1.126
1.157
798
210
050HA
1.126
1.157
798
230
070HA
1.126
1.157
798
250
080HA
1.126
1.157
798
260
* Weight with two heat exchangers and buffer tank without pumps.
233
Cod.: SWRLHUY.06 / 1201
Technical Data
Accessories
WRL-H
Water cooled reversible heat pumps
for the production of hot water up to 55 °C
base.
•STA: Room temperature sensor, 230 Vac
•STH: Room temperature and humidity sensor, 230 Vac recess mounted kit containing
the sensor with display and control knob,
able to control an ON-OFF valve or a zone
pump and
dehumidifier enable.
mixing valve in applications with radiant
panels. Accessory to be requested together
with the VMFCRP zone accessory.
• S...I: System buffer tanks: available in sizes
200, 300, 400 and 500 litres (S200I, S300I,
S400I and S500I).
TCONN6J000.
• VMFCRP: WRL Zones Control can control
up to a maximum of 3 zones with the following modes:
- Zone 1: Controlled as standard with the
latest generation electronic controller. The
"SSM" clamp on sensor (accessory) is recommended to control the flow temperature.
- The control of the remaining Zone 2 and
WRLH
AER485P1
VT
STA
STH
SSM
S...I (200-300-400-500)
PGD1
KSAE
VMFCRP
PGD1
ACCESSORY
VMFCRP
PARTIAL HEAT RECOVERY
Characteristics
operating with refrigerant R410A. They are
High efficiency
Connections
Silent
The WRL units are distinguished for their
silence in operation. Careful soundproofing of
the unit with suitable sound-absorbent material results in low sound levels for all units.
234
Dynamic set point
Using the latest generation of electronic controller and with an external air temperature
sensor (accessory), the heat pump unit can
vary the leaving water temperature based on
climatic conditions, thus increasing the energy
efficiency of the system.
Advantages
Using the latest innovative technology and
focus on maximum quality gives the WRL
series the maximum energy efficiency, ease of
installation, and most versatile application
using renewable energy sources.
Range
Available in 8 sizes:
• Reversible refrigerant side
Version
• WRLH= Heat pump
Technical features
• Structure and base in hot dip galvanised
sheet steel with epoxy paint finish (RAL
9002)
• Compressors with high performance and
low electrical input
• Flow switch as standard
• Conforms with Safety Directives (CE) and
the standards regarding electromagnetic
compatibility
The safety of the unit is provided by the
door interlocked isolator and active protection of the main components
180
✔
9
✔
✔
✔
✔
✔
✔
✔
200
✔
9
✔
✔
✔
✔
✔
✔
✔
300
✔
9
✔
✔
✔
✔
✔
✔
✔
400
✔
9
✔
✔
✔
✔
✔
✔
✔
500
✔
15
✔
✔
✔
✔
✔
✔
✔
550
✔
15
✔
✔
✔
✔
✔
✔
✔
600
✔
15
✔
✔
✔
✔
✔
✔
✔
650
✔
15
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Unit configurator
1 2 3
456
7
8
9
10
11
12
13
14
15
|||||||||| |
Code|
Field of use
|
Version
|
Pumps |
Field |
Power supply
|||
(geothermal side)
|
not used
|
Size
Model
Heat Pumps
Soft start
recovery
(system side)
CODE:
WRL
SIZE:
180 - 200 - 300 - 400 - 500 - 550 - 600 - 650
FIELD OF USE:
° - Standard with leaving water above +4 °C
Y - Low temperature with leaving liquid down to -8 °C
X - Electronic expansion valve with leaving liquid down to +4°C
MODEL:
H - Reversible refrigerant circuit
VERSION:
° - Standard
HEAT RECOVERY
D - Desuperheater
PUMPS (GEOTHERMAL SIDE)
° - Without pump
B - Low static pressure pump
U - High static pressure pump
F - Low static pressure inverter pump
I - High static pressure inverter pump
PUMPS (SYSTEM SIDE)
° - Without pump
P - Low static pressure pump
N - High static pressure pump
FIELD NOT USED
°
SOFT START
° - Without Soft Start
S - Soft Start
POWER SUPPLY
° - 400V-3N -50 Hz
5 - 500V-3-50Hz (only models WRL400-550-600-650)
235
Technical Data
Dimensions (mm)
WRL-H Model
Cooling capacity
Input power
Input current
EER
Heating capacity
Input power
Input current
COP
Compressor
Capacity control
Geothermal side heat exchanger
Quantity
Quantity
Desuperheater (optional)
Quantity
Expansion vessel (versions with pumps)
Expansion vessel (per circuit)
Sound data
Kw
Kw
A
-
l/h
kPa
l/h
kPa
Kw
Kw
A
l/h
kPa
l/h
kPa
180
44,8
10,7
20
4,21
7710
22
9360
31
52,6
12,6
200
59,5
14,3
25
4,15
10230
37
12450
52
70,4
17,2
23
4,16
29
4,09
9050
28
9360
31
300
64,7
15,9
28
4,07
11120
36
13580
51
76,0
18,5
400
79,2
17,9
32
4,41
13620
52
16400
74
93,0
21,4
500
92,8
19,8
36
4,69
15960
25
19030
34
105,4
23,5
41
4,48
31
36
12100
48
4,10
13070
48
4,35
16000
70
12450
13580
52
51
16400
74
550
119,6
27,0
52
4,43
20570
40
24750
56
143,2
32,0
600
139,6
30,7
60
4,55
24010
40
28760
57
163,7
36,3
650
156,6
35,1
69
4,46
26930
49
32370
71
183,1
41,5
57
65
75
18130
29
4,47
24620
52
4,51
28160
54
4,42
31490
67
19030
24750
28760
32370
34
56
57
71
1/2
50/100
1/2
50/100
1/2
50/100
1/2
50/100
2”½
1
2”½
1
2”½
1
2”½
1
2”½
1
2”½
1
2”½
1
2”½
1
A
A
SCROLL
%
1/2
50/100
1/2
50/100
1/2
50/100
1/2
50/100
B
C
B
PLATES
ø
n°
2”
1
2”
1
2”
1
2”
1
ø
n°
2”
1
2”
1
2”
1
2”
1
ø
n°
1”½
1”½
1
1”½
1
1”½
1”½
1”½
1”½
1”½
1
1
1
1
1
1/12
1/12
1/12
1/12
C
PLATES
WRLH 180-400
WRLH 500-650
PLATES
1
n°/l
1/8
1/8
1/8
1/8
Sound power
dB(A)
61.1
61.8
62.9
71.1
67.6
79.1
79.1
79.1
Sound pressure [**]
dB(A)
29.1
29.8
30.9
39.1
35.6
47.1
47.1
47.1
Performance in accordance with EN 14511.
Sound power
Aermec determines the sound power value on the
basis of measurements taken in accordance with
standard 9614-2, in compliance with the Eurovent
certification.
Cooling:
Evaporator
Inlet temperature Outlet temperature 12 °C
7 °C
30 °C
35 °C
Heating:
Evaporator
Inlet temperature Outlet temperature WRLH Model
Height (A)
Width (B)
Depth (C)
Weight empty
mm
mm
mm
kg
180
1380
1320
845
370
200
1380
1320
845
370
300
1380
1320
845
381
400
1380
1320
845
388
500
1380
2009
845
522
550
1380
2009
845
598
600
1380
2009
845
708
650
1380
2009
845
753
10 °C
* °C
40 °C
45 °C
Code : SWRLH2UY.02 / 1201
[**] Sound pressure
in an unrestricted range on a refl ective plane (directional fact. Q=2), 10m away from the unit external
surface, complying with ISO 3744.
236
The technical data given on this documentation is not binding.
237
Accessories
VXT
Water cooled GEOTHERMAL reversible heat pump
Heating, cooling and domestic hot water
• KST
• KFC
• PGD0
• VT
Solar heat kit.
Free-cooling kit
Remote control panel
Group of 4 anti-vibration mounts
R410A
KST
KFC
PGD0
VT 15
VXT 08
VXT 10
✔
✔
08
10
✔
✔
✔
✔
VXT 06
✔
06
✔
✔
VXT 14
✔
14
✔
✔
VXT 16
✔
16
✔
✔
Unit Configurator
requirements.
123
|
|
Code
45
|
|
|
Size
6
|
|
Applications
7
|
|
|
Electric heaters
8
|
|
Soft start
9
|
|
|
Power supply
Code:
VXT
Size:
06 - 08 - 10 - 14 - 16
Applications:
P - ON-OFF pump
F - Pump with phase cut control
X - Inverter Pump
V - With 2-way modulating valve
• DOMESTIC HOT WATER: DHW
TEMPERATURE UP TO 55 °C
• 180 LITRE DHW STORAGE TANK
• SUITABLE FOR geothermal application
• designed for supplementary SOLAR
PANEL INTEGRATION
Electric heaters:
° - Standard (without DHW supplementary heaters)
R - With DHW supplementary heaters
Soft-start: (standard for the 230V ~ 50Hz versions)
° - Standard (without soft-start)
S - With Soft-start kit 400V 3N~ 50Hz
Features
The VXT heat pump provides winter heating and
summer air conditioning of the home.
VXT also produces domestic hot water: DHW
temperature up to 55 °C
Small indoor units making them very easy to
install in a kitchen for example or even inside a
cabinet like the type used for a fridge. The careful
choice of the sound-absorbent materials makes
the unit particularly quiet.
Hydraulic circuit
The unit is equipped as standard with all components needed for correct and safe operation
• ON-OFF pump
• Pump with phase cut control
• Inverter Pump
System side: following included
• 3-speed circulating pump
• expansion vessel
• safety valve
• brazed plate heat exchanger
Bore hole water sheet application: possible to
have
• 2-way modulating valve
Main features:
Refrigerant circuit
• Refrigerant side reversing
• Scroll compressors
- High level of reliability
- High efficiency to guarantee the production of
water up to 55 °C, also suitable for traditional
radiators.
• Externally isolated plate heat exchangers to
decrease heat loss and optimised to obtain high
efficiency
• Dual-flow electronic expansion valve
• High and low pressure transducers and pressure
switches
DHW side: following included
• 180 litre storage tank with coil for the production of hot water using the heat of condensation
• plate heat exchanger for the instantaneous production of hot water
• 2 supplementary electrical heaters
• tank with connections for solar panels
• water filter mounted at the inlet of the plate
heat exchanger
• mixing valve with manual adjustment
238
FOR GEOTHERMAL APPLICATIONS
FOR APPLICATIONS WITH BORE HOLE WATER
Electronic controller
• The microprocessor supplied provides control of:
- hydraulic pumps on the system and geothermal
circuit sides
- radiant plant temperature and humidity sensor
- DHW boiler temperature probe
- external air temperature sensor for the compensation of the system water set point
- system mixing valve
- optional supplementary solar control kit
- control of up to two ambient zones with digital
inputs.
Power supply:
M - 230V ~ 50Hz
T - 400V 3N~ 50Hz
VXT
KFC
KST
Options
• Supplementary electric heaters
Geothermal application: it is possible to have
239
Technical Data
Dimensions (mm)
VXT
HEATING MODE OPERATION 30/35 °C - 10/5 °C (Under floor system)
230V
Heating capacity
kW
400V
230V
Total power input
kW
400V
230V
COP
400V
230V
Current input
A
400V
230V
l/h
400V
230V
l/h
400V
HEATING MODE OPERATION 40/45 °C - 10/5 °C (Fan coils)
230V
Heating capacity
kW
400V
230V
Total power input
kW
400V
230V
COP
400V
230V
Current input
A
400V
230V
l/h
400V
230V
l/h
400V
COOLING MODE OPERATION 23/18 °C - 30/35 °C (Under floor system)
230V
400V
230V
Total power input
kW
400V
230V
EER
400V
230V
Current input
kW
400V
230V
l/h
400V
230V
l/h
400V
COOLING MODE OPERATION 12/7 °C - 30/35 °C (Fan coils)
230V
Cooling capacity
kW
400V
230V
Total power input
kW
400V
230V
EER
400V
230V
Current input
kW
400V
230V
l/h
400V
230V
l/h
400V
230V
Maximum current input
A
400V
Starting current with Soft-start
A
230V
Starting current
A
400V
e Sound pressure
dB(A)
Cooling capacity
kW
06
08
10
14
16
7.6
7.6
1.6
1.6
4,75
4,75
8
3.6
1310
1310
1050
1050
9.7
9.9
2.0
1.9
4,85
5,21
10.6
3.4
1670
1700
1350
1390
12.3
12.3
2.6
2.4
4,73
5,13
13.3
5.3
2120
2110
1700
1720
16.4
3.2
5,13
7.3
2820
2300
18.6
3.6
5,17
7.5
3200
2610
7.52
7.52
2.21
2.07
3,40
3,63
10.7
4.2
1290
1290
930
960
9.28
9.47
2.59
2.46
3,58
3,85
13.4
4.6
1600
1630
1170
1230
12.18
11.76
3.25
3.00
3,75
3,92
16.4
6.3
2090
2020
1560
1530
16.24
4.00
4,06
8.9
2790
2140
17.79
4.50
3,95
8.8
3060
2320
8.7
8.5
1.7
1.6
5,12
5,31
8.2
3.7
1500
1450
1770
1720
10.5
10.1
2.0
1.9
5,25
5,32
10.7
3.6
1810
1740
2140
2060
13.6
13.7
2.5
2.4
5,44
5,71
13.5
5.4
2340
2360
2750
2760
17.8
3.3
5,39
7.5
3070
3600
20.3
3.5
5,80
7.5
3500
4080
6.21
6.39
1.71
1.61
3,63
3,97
8
3.6
1070
1100
1350
1360
16.0
5.5
29.5
32.0
35.0
7.89
8.21
2.01
1.92
3,93
4,28
10.6
3.4
1360
1410
1690
1730
19.0
6.0
37.5
35.0
37.0
10.23
10.3
2.51
2.41
4,08
4,27
13.3
5.3
1760
1770
2170
2170
23.0
8.0
45.0
48.0
37.0
13.38
3.32
4,03
7.3
2300
2840
10.0
64.0
39.0
15.26
3.52
4,34
7.5
2620
3200
11.8
64.0
41.5
VXT.
Height
Width
Depth
Weight
mm
mm
mm
kg
06
08
10
14
16
2000
560
560
254
2000
560
560
256
2000
560
560
268
2000
560
560
283
2000
560
560
291
Code.: SVXTUY.02 / 1003
Performance in accordance with EN 14551:2004.
Sound pressure
Environment volume of 80 m3, reverberation time 0.5 s, distance 3 metres and directivity factor 4.
NXW
Water cooled internal chiller and heat pump units with scroll compressors
Heating capacity from 119 kW to 419 kW
Aermec
participates in the EUROVENTProgram:
LCP/W/P/C - LCP/W/P/R
I prodotti interessati figurano sul sito
•
•
•
•
high efficiency version CLASS "a" EUROVENT
HEAT PUMP WITH REFRIGERANT SIDE REVERSING FOR GEOTHERMAL APPLICATIONS
OPTION OF 1 OR 2 PUMPS ON BOTH EVAPORATOR AND CONDENSER side
production of hot water UP TO 55 °C c
Maximum energy efficiency
For years Aermec has been attentive to the
energy efficiency issue, and has now designed
the NXW units with the aim of ensuring high
efficiency levels with both full and partial
loads. The results are an EER ≥ level of 5.05
and COP ≥ at 4.45 (Class A Eurovent)
Models available
NXW°: water side reversible heat pump
NXWH: refrigerant side reversible heat pump
All models are available in low noise version
Evaporator and/or condenser side pump unit
The machine can be supplied with a hydronic
module for both the evaporator and the
condenser side; each module includes a water
filter fitted, low or high head pump, flow
switch, and a 25 litre system side expansion
tank, thereby optimising space, time and
installation costs.
It is possible to request a standby low or high
head pump.
Advanced controls
The NXW controller provides several functions:
- Two chiller units in parallel (run/standby)
- Programmed pump rotation
- Inverter condenser pump control to manage
the condensing pressure
- Programmable time-clock
- Automatic water set point compensation
- Data logging
electrical input
• High and low pressure transducers as standard
compatibility
the main components
Construction details:
steel with epoxy pain finish (RAL 9002)
Accessories
• AER485P1: RS-485 interface for supervision - AERWEB300-6G: Web server to monitor and
remote control max. 6 units in RS485 netreduction of input current. Must be requested
remote control of a chiller through a com- - AERWEB300-18G: Web server to monitor and
only.
remote control max. 18 units in RS485 net- •AVX: spring anti-vibration mounts.
work with integrated GPRS modem;•
• DRE: oft starter (current reduction of about
PGD1: In addition to the unit mounted con30% for single circuit units, 26% for two cirremote control max. 6 units in RS485 nettroller on the NXW unit a remote mounted
work;
PGD1 panel can be supplied providing the
same functions (keyboard controls and disFactory fitted only.
remote control max. 18 units in RS485 netplay).
work;
•RIF: Power factor correction. Connected in
242
0550
0600
0650
0700
0750
0800
0900
1000
1250
1400
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
319
320
320
320
309
319
320
320
309
309
309
321
311
311
312
309
311
311
312
312
319
320
320
320
309
309
321
311
311
312
303
312
301
320
309
309
310
301
320
303
303
312
310
311
31
312
312
310
311
312
312
312
301
320
309
309
310
310
311
31
312
312
310
651
301
320
309
309
310
301
309
309
311
312
303
311
311
312
310
303
311
313
313
313
301
320
309
309
310
303
311
311
312
310
310
651
301
320
309
309
310
302
309
311
312
312
303
651
651
651
651
304
651
651
651
651
301
320
309
309
310
303
651
651
651
651
310
652
303
312
312
312
312
310
651
651
651
651
310
651
651
651
651
314
652
652
652
652
303
312
312
312
312
310
651
651
651
651
314
652
310
651
651
651
651
310
651
651
651
651
314
652
652
652
652
314
665
665
665
665
310
651
651
651
651
314
652
652
652
652
652
652
314
665
665
665
665
314
665
665
665
665
314
653
653
653
653
315
653
653
653
653
314
665
665
665
665
314
653
653
653
653
315
323
316
653
653
653
653
316
654
654
654
654
315
654
654
654
654
317
659
659
659
659
316
653
653
653
653
315
654
654
654
654
322
324
316
654
654
654
654
315
654
654
654
654
315
659
659
659
659
317
659
659
659
659
316
654
654
654
654
315
659
659
659
659
322
324
315
654
654
654
654
317
654
654
654
654
317
659
659
659
659
318
659
659
659
659
315
654
654
654
654
317
659
659
659
659
322
324
RIF98
RIF95
RIF95
RIF95
RIF95
RIF95
RIF96
RIF97
RIF97
RIF97
dre551
DRE601
DRE651
DRE701
DRE751
DRE801
DRE901
DRE1001
DRE1251
DRE1401
Unit Configurator
By suitably combining the numerous options available it is possible to configure each model in such a way as to meet even the most demanding
of system requirements.
Characteristics
NXW is the range of water cooled heat pumps
that operate with refrigerant R410A. They are
NXW
0500
aer485P1
All
•
AERWEB300
•
All
REMOTE CONTROL PANEL PGD1
•
All
AVX
°
319
° + 1 pUMP
320
° + 2 pUMPS
320
° + 3 pUMPS
320
° + 4 pUMPS
309
h
319
h + 1 pUMP
320
h + 2 pUMPs
320
h+ 3 pUMPs
309
h + 4 pUMPs
309
l
309
l+ 1 pUMP
321
l+ 2 pUMPs
311
l + 3 pUMPs
311
l + 4 pUMPs
312
hl
309
hl+ 1 pUMP
311
hl+ 2 pUMPs
311
hl + 3 pUMPs
312
hl + 4 pUMPs
312
e
319
e + 1 pUMP
320
e + 2 pUMPs
320
e + 3 pUMPs
320
e + 4 pUMPs
309
le
309
l e + 1 pUMP
321
l e + 2 pUMPs
311
l e + 3 pUMPs
311
l e + 4 pUMPs
312
t
303
lt
312
RIF
TUTTE
rif98
DRE
dre501
TUTTE
1 2 3
4 5 6 7
8
9
10
11
12
13
14***
15***
||||||||||
Code |Field of|Version| Heati | Pumps |
|
use
||
recovery
|
Evaporator
|
Size
Model
Evaporator
Power supply
Pumps Condenser
Code:
NXW
Size:
0500, 0550, 0600, 0650, 0700, 0750, 0800, 0900, 1000, 1250, 1400
Field of use:
° -Thermostatic expansion valve with leaving water above +4 °C
Y -Thermostatic expansion valve for low leaving liquid down to -8 °C
X - Electronic expansion valve also for low leaving liquid down to -8 °C
Model:
° - Heat pump with water side reversing
H - Heat pump with refrigerant side cycle reversing
Version:
° -Standard
L -Low Noise
Evaporator:
° -Standard
E -Evaporating unit (shipped with holding charge only)
Heat recovery
D -With desuperheaters (partial heat recovery)
T -With total heat recovery
Power supply:
° -400V 3~ 50Hz with circuit breakers
4 -230V 3~ 50Hz with circuit breakers*
5 -500V 3 50Hz with circuit breakers**
Evaporator side pumps
° - without pumps
M - low head pump
N - low head pump and standby pump
O - high head pump
P - high head pump and standby pump
Condenser side pumps
° - without pumps
U - low head pump
V - low head pump and standby pump
W - high head pump
Z - high head pump and standby pump
J - low head inverter pump
K - high head inverter pump
Attention: the standard options are shown by the symbol °.
Combinations not possible: YD, YT, HE, HT, ET, T with
evaporator or condenser side pumps.
* only available for sizes 0500-0700
** only available for sizes 0600-0650 and sizes 0800-1400
*** "evaporator" is the heat exchanger that works as such in cooling; "condenser" is the heat exchanger that works as such in heating
243
Technical Data
Technical Data
MODEL NXW "°" - "L"
MODEL NXW "°" - "L"
U.M.
0500
0550
0600
0650
0700
Mod. NXW
U.M.
750
800
900
1000
1250
Cooling capacity
kW
112
121
149
167
189
Cooling capacity
kW
223
258
292
326
355
385
Total input power
kW
22,2
23,9
29,5
32,9
37,3
Total input power
kW
43,6
50,4
57,8
64,5
70,3
76,1
l/h
19264
20812
25628
28758
32458
l/h
38392
44325
50188
56050
61097
66142
Mod. NXW
1400
kPa
30
35
32
40
43
kPa
47
49
55
35
36
36
l/h
22892
24718
30449
34141
38548
l/h
45511
52565
59629
66594
72590
78585
kPa
25
29
29
37
37
kPa
45
60
38
29
34
36
Heating capacity
kW
119
129
161
181
205
Heating capacity
kW
242
279
318
356
388
419
Total input power
kW
26,5
28,6
35,7
40,0
45,5
Total input power
kW
53,5
61,8
70,4
79,2
86,2
93,2
l/h
20468
22188
27692
31215
35195
l/h
41595
47995
54638
61281
66656
72030
kPa
20
23
24
31
31
kPa
38
50
32
25
29
30
l/h
16138
17515
21859
24681
27763
l/h
32850
37904
43140
48340
52574
56807
Evaorator pressure drop
kPa
21
25
23
29
31
kPa
34
36
41
26
27
27
ENERGY EFFICIENCY
ENERGY EFFICIENCY
EER
W/W
5,05
5,06
5,05
5,08
5,06
EER
W/W
5,12
5,11
5,05
5,05
5,05
5,05
ESEER
W/W
6,01
6,02
6,01
6,04
6,02
ESEER
W/W
6,05
6,03
6,02
6,06
6,05
6,06
COP
W/W
4,49
4,51
4,51
4,54
4,50
COP
W/W
4,52
4,52
4,51
4,5
4,5
4,5
ELECTRICAL DATA
ELECTRICAL DATA
400V 3 50Hz
Input current (cooling)
A
48,3
50,6
58,4
63
86
A
94
102
120
138
140
143
Input current (heating)
A
54
57
66
72
94
A
105
115
135
154
160
165
Maximum current
A
75
80
96
107
122
Maximum current
A
146
169
193
217
231
248
Starting current
A
240
245
227
238
289
Starting current
A
319
341
398
422
490
504
kg
10-10
12-12
16-16
24-24
25 -25
27-27
n°/n°
4/2
4/2
4/2
4/2
4/2
4/2
2"1/2
2"1/2
2"1/2
3"
3"
3"
CHARGE
CHARGE
Refrigerant R410A(C1- C2) [1]
kg
COMPRESSOR
6-6
6-6
7,8 - 7,8
7,8 - 7,8
9-9
3/2
4/2
4/2
4/2
COMPRESSOR
SCROLL
n°/n°
3/2
Quantity
n°
1
Hydraulic connection Victaulic
Ø
2" 1/2
2" 1/2
2" 1/2
2" 1/2
2" 1/2
Quantity
n°
1
Ø
2" 1/2
2" 1/2
2" 1/2
2" 1/2
2" 1/2
kPa
91
82
70
89
69
kPa
181
173
167
213
191
kPa
86
76
92
67
111
kPa
188
171
155
188
161
78
79
79
80
82
46
47
47
48
50
e Sound power "°"
[1] This data is subject to variations
Performance values refer to the following conditions
Cooling:
–– Leaving water temperature 7 °C
–– Condenser entering water temperature 30 °C
–– ∆t = 5 °C
e
244
1
Quantity
n°
Ø
2"1/2
2"1/2
2"1/2
1
3"
3"
3"
kPa
102
86
68
74
102
88
kPa
152
180
166
177
167
158
kPa
88
99
104
93
69
128
kPa
182
158
168
215
190
166
86
88
88
88
90
90
54
56
56
56
58
58
80
82
82
82
84
84
48
50
50
50
52
52
Evaporator available head
(low head pump M - N)
(high head pump O - P)
Condenser available head
(low head pump U - V - J)
(high head pump W - Z - K)
SOUND DATA
SOUND DATA
Sound pressure "L"
Ø
CONDENSER SIDE PUMPS
e Sound power "L"
n°
EVAPORATOR SIDE PUMPS
Sound pressure "°"
Quantity
CONDENSER (plate)
CONDENSER (plate)
EVAPORATOR (plate)
EVAPORATOR (plate)
dB(A)
72
73
73
74
76
40
41
41
42
44
Heating:
–– Leaving water temperature 45°C
–– Evaporator entering water temperature 10 °C
–– ∆t = 5 °C
–– Power supply: 400V 3~ 50 Hz
Aermec determines the sound power value on the basis of measurements taken in accordance with ISO 9614-2, as
Performance values refer to cooling mode; "evaporator" and "condenser" mean the heat exchangers functioning as
such in cooling mode.
e Sound power "°"
Sound pressure "°"
e Sound power "L"
Sound pressure "L"
Cooling:
–– ∆t = 5 °C
e
dB(A)
Heating:
–– ∆t = 5 °C
245
Technical Data
Technical Data
MODEL NXW "H" - "HL"
MODEL NXW "H" - "HL"
Mod. NXW
U.M.
0500
0550
0600
0650
0700
Mod. NXW
U.M.
750
800
900
1000
1250
1400
Cooling capacity
kW
106
114
141
160
181
Cooling capacity
kW
212
243
278
314
342
370
Total input power
kW
23,2
25
30,3
34,2
38,9
Total input power
kW
45,5
52
60,4
68,8
74,7
80,6
63676
l/h
18232
19608
24252
27496
31095
l/h
36431
41768
47876
53985
58831
kPa
17
20
19
24
24
kPa
29
38
24
19
22
24
l/h
22023
23693
29203
33089
37444
l/h
43858
50272
57750
65229
71038
76847
kPa
25
29
28
35
35
kPa
42
55
36
28
32
34
Heating capacity
kW
121
131
160
181
203
Heating capacity
kW
240
276
314
353
386
419
Total input power
kW
27,2
29,4
35,9
40,4
45,5
Total input power
kW
53,8
62,1
70,6
79,2
86,7
94,1
l/h
20812
22532
27520
31088
34982
l/h
41249
47515
54090
60665
66348
72030
kPa
20
23
24
31
31
kPa
38
50
32
25
29
30
l/h
16138
17515
21859
24681
27763
l/h
32850
37904
43140
48340
52574
56807
kPa
22
26
24
31
30
kPa
37
49
31
24
28
30
4,59
ENERGY EFFICIENCY
ENERGY EFFICIENCY
EER
W/W
4,57
4,56
4,65
4,67
4,65
EER
W/W
4,66
4,67
4,61
4,56
4,58
ESEER
W/W
5,73
5,71
5,76
5,85
5,76
ESEER
W/W
5,79
5,64
5,72
5,85
5,77
5,8
COP
W/W
4,45
4,46
4,46
4,47
4,47
COP
W/W
4,46
4,45
4,45
4,45
4,45
4,45
A
49
52
60
65
87
A
95
104
122
140
144
147
A
54
57
66
72
94
A
105
115
135
154
160
165
Maximum current
A
75
80
96
107
122
Maximum current
A
146
169
193
217
231
248
Starting current
A
240
245
227
238
289
Starting current
A
319
341
398
422
490
504
11,0-11,0
13,0-13,0
18,0-18,0
27,0-27,0
27,0-27,0
29,0-29,0
4/2
4/2
4/2
4/2
4/2
4/2
2"1/2
2"1/2
3”
3"
3"
3"
ELECTRICAL DATA
400V 3 50Hz
CHARGE
COMPRESSOR
ELECTRICAL DATA
CHARGE
6,5-6,5
6,5-6,5
8,5-8,5
8,5-8,5
10,0-10,0
n°/n°
3/2
3/2
4/2
4/2
4/2
n°
Ø
1
2"1/2
2"1/2
2"1/2
2"1/2
2"1/2
CONDENSER (plate)
n°
Ø
Cooling:
–– ∆t = 5 °C
e
246
1
2"1/2
2"1/2
2"1/2
2"1/2
2"1/2
kPa
107
102
88
110
95
kPa
202
192
183
235
217
kPa
90
81
100
75
120
kPa
191
176
161
196
170
e Sound power "H"
Sound pressure "HL"
n°/n°
Quantity
n°
Ø
1
CONDENSER (plate)
Quantity
e Sound power "HL"
EVAPORATOR (plate)
Quantity
Sound pressure "H"
COMPRESSOR
EVAPORATOR (plate)
SOUND DATA
400V 3 50Hz
dB(A)
78
79
79
80
82
46
47
47
48
50
72
73
73
74
76
40
41
41
42
44
Heating:
–– ∆t = 5 °C
Quantity
n°
Ø
2"1/2
2"1/2
3”
3"
3"
3"
kPa
131
102
104
95
121
108
kPa
182
194
200
197
185
175
kPa
94
109
111
99
76
135
kPa
187
166
174
221
198
176
SOUND DATA
e Sound power "H"
Sound pressure "H"
e Sound power "HL"
Sound pressure "HL"
Cooling:
–– ∆t = 5 °C
e
dB(A)
1
86
88
88
88
90
90
54
56
56
56
58
58
80
82
82
82
84
84
48
50
50
50
52
52
Heating:
–– ∆t = 5 °C
247
Dimensions (mm)
Technical Data
MODEL NXW "E" - "EL"
Mod. NXW
U.M.
0500
0550
0600
0650
0700
750
800
900
1000
1250
1400
Cooling capacity
kW
105
113
139
156
177
209
241
273
305
332
360
Total input power
kW
24,9
26,8
33
36,9
41,7
48,8
56,5
64,7
72,3
78,8
85,3
l/h
18031
19480
23988
26918
30381
35935
41488
46976
52463
57187
61909
kPa
26
31
28
35
38
41
43
48
31
32
32
W/W
4,22
4,23
4,22
4,24
4,23
4,28
4,27
4,22
4,22
4,22
4,22
ENERGY EFFICIENCY
EER
ELECTRICAL DATA
400V 3 50Hz
A
54,1
Maximum current
A
75
Starting current
A
240
56,7
A
65,4
70,6
96,3
105,3
114,2
134,4
154,6
156,8
160,2
80
96
107
122
146
169
193
217
231
248
245
227
238
289
319
341
398
422
490
504
A
CHARGE
kg
COMPRESSOR
C
ONLY WITH HOLDING CHARGE
SCROLL
n°/n°
3/2
3/2
4/2
4/2
4/2
4/2
Ø
2"1/2
2"1/2
2"1/2
2"1/2
2"1/2
2"1/2
C
B
4/2
4/2
4/2
4/2
4/2
2"1/2
2"1/2
3"
3"
3"
B
Quantity
Hydraulic connection
1
CONDENSER (plate)
Quantity
n°
Ø
1
2"1/2
2"1/2
2"1/2
2"1/2
2"1/2
2"1/2
2"1/2
2"1/2
3"
3"
3"
Sound data
e Sound power
Sound pressure
e Sound power
Sound pressure
dB(A)
78
79
79
80
82
86
88
88
88
90
90
46
47
47
48
50
54
56
56
56
58
58
72
73
73
74
76
80
82
82
82
84
84
40
41
41
42
44
48
50
50
50
52
52
[[1] This data is subject to variations.
Cooling:
- Leaving water temperature 7 °C
- Condensing temperature 45 °C
∆t = 5 K
248
* Performance values refer to cooling mode.
e Aermec determines the sound power value on the basis of
measurements taken in accordance with ISO 9614-2, as required for
Mod. NXW
Height(A)
Width(B)
Lentgh(C)
Weight
vers
"°"
U.M.
mm
mm
mm
kg
0500
1835
800
1790
578
0550
1835
800
1790
582
0600
1835
800
1790
682
0650
1835
800
1790
690
0700
1835
800
1790
727
0750
1775
800
2090
882
0800
1775
800
2354
989
0900
1820
800
2354
1180
1000
1820
800
2354
1417
1250
1820
800
2354
1461
1400
1820
800
2354
1539
Height(A)
Width(B)
Lentgh(C)
Weight
"L"
mm
mm
mm
kg
1885
800
2090
750
1885
800
2090
755
1885
800
2090
854
1885
800
2090
863
1885
800
2090
900
1885
800
2090
1054
1885
800
2354
1187
1885
800
2354
1378
1885
800
2354
1615
1885
800
2354
1659
1885
800
2354
1737
Height(A)
Width(B)
Lentgh(C)
PUMPS "°"
mm
mm
mm
1775
800
3020
1775
800
3020
1775
800
3020
1775
800
3020
1775
800
3020
1775
800
3020
1775
800
3420
1850
800
3420
1850
800
3420
1850
800
3420
1850
800
3420
Height(A)
Width(B)
Lentgh(C)
PUMPS "L"
mm
mm
mm
1885
800
3020
1885
800
3020
1885
800
3020
1885
800
3020
1885
800
3020
1885
800
3020
1885
800
3420
1885
800
3420
1885
800
3420
1885
800
3420
1885
800
3420
Height(A)
Width(B)
Lentgh(C)
Weight
"H"
mm
mm
mm
kg
1835
800
1790
628
1835
800
1790
633
1835
800
1790
734
1835
800
1790
743
1835
800
1790
791
1775
800
2090
948
1775
800
2354
1042
1820
800
2354
1275
1820
800
2354
1545
1820
800
2354
1577
1820
800
2354
1657
Height(A)
Width(B)
Lentgh(C)
Weight
"HL"
mm
mm
mm
kg
1885
800
2090
801
1885
800
2090
805
1885
800
2090
907
1885
800
2090
915
1885
800
2090
963
1885
800
2090
1121
1885
800
2354
1240
1885
800
2354
1473
1885
800
2354
1743
1885
800
2354
1775
1885
800
2354
1855
Height(A)
Width(B)
Lentgh(C)
PUMPS "H"
mm
mm
mm
1775
800
3020
1775
800
3020
1775
800
3020
1775
800
3020
1775
800
3020
1775
800
3020
1775
800
3420
1850
800
3420
1850
800
3420
1850
800
3420
1850
800
3420
Height(A)
Width(B)
Lentgh(C)
PUMPS "HL"
mm
mm
mm
1885
800
3020
1885
800
3020
1885
800
3020
1885
800
3020
1885
800
3020
1885
800
3020
1885
800
3420
1885
800
3420
1885
800
3420
1885
800
3420
1885
800
3420
Height(A)
Width(B)
Lentgh(C)
E
mm
mm
mm
1835
800
1790
1835
800
1790
1835
800
1790
1835
800
1790
1835
800
1790
1775
800
2090
1775
800
2354
1775
800
2354
1820
800
2354
1820
800
2354
1820
800
2354
Height(A)
Width(B)
Lentgh(C)
EL
mm
mm
mm
1885
800
2090
1885
800
2090
1885
800
2090
1885
800
2090
1885
800
2090
1885
800
2090
1885
800
2354
1885
800
2354
1885
800
2354
1885
800
2354
1885
800
2354
249
Cod.: SNXWUY.05 / 1201
EVAPORATOR (plate)
WSA
R134a
Water cooled chillers and heat pumps with twin-rotor screw compressor
High-efficiency versions
Mod
Vers.
AERWEB300
MULTICHILLER
AER485P1
RIF
PRV3
°/L
E
AVX
D
DE
T
AKW
0701
✔
✔
✔
161
✔
651
668
651
668
652
✔
0801
✔
✔
✔
161
✔
652
668
652
668
655
✔
0901
✔
✔
✔
201
✔
652
668
652
668
655
✔
1101
✔
✔
✔
241
✔
656
669
654
669
657
✔
1402
✔
✔
✔(x2)
161(x2)
✔
658
670
658
670
662
✔
1602
✔
✔
✔(x2)
161(x2)
✔
658
670
659
670
662
✔
1802
✔
✔
✔(x2)
201(x2)
✔
659
670
659
670
662
✔
2002
✔
✔
✔(x2)
201-241
✔
667
671
667
671
663
✔
2202
✔
✔
✔(x2)
241(x2)
✔
661
672
661
672
664
✔
2502
✔
✔
✔(x2)
301(x2)
✔
661
672
661
672
664
✔
2802
✔
✔
✔(x2)
301(x2)
✔
661
672
661
672
664
✔
Unit Configurator
Aermec
participates in the EUROVENT
Program: LCP / W / P / C
The products of interest can be
found on the website
requirements.
Characteristics
• Available in 11 sizes (4 sizes single compressor and 7 sizes dual compressor)
• Versions for cooling only, heat pump or evaporating unit (delivered with holding charge
only)
• Partial or total heat recovery options
- leaving water temperature up to 55 °C in heat
pump mode
• Version L:
- Low noise with sound absorbent galvanised
sheet panels
100% with standard thermostatic expansion
valve. (25 to 100% with electronic expansion
valve option)
• Compressor discharge and liquid line isolat-
ing valves
• Current transformer as standard for each compressor
• Dual refrigerant circuit plate heat exchanger
optimised for R134a on dual compressor
units
• Independent control for individual circuits
• Electrical panel with all cables numbered
• Modulating capacity control with dynamic
display of refrigeration capacity
• “Always Working” function. In the case of
critical conditions the unit will not stop but
automatically adjusts operation
• Automatic set point compensation using analogue inputs 4-20 mA or 0–10 V or an external air sensor
• Auto-adaptive differential to ensure correct
compressor operating timers
• PDC (Pull Down Control) system which prevents capacity loading when the water temperature quickly approaches the set point
• DL (Demand Limit) system permits current
limiting of the unit during times of insufficient
electrical power (load peaks or generator
operation)
123
4567
8
9
10
11
12
13
Code
Size
Expansion device
Model
Heat recovery
Version
Condenser
Power supply
Code:
WSA
Size:
0701, 0801, 0901, 1101, 1402, 1602, 1802, 2002, 2202, 2502, 2802
Expansion device:
° - Standard, minimum leaving water temperature down to +4 °C
X - With electronic expansion valve max. temp. of water produced:
+4°C (for lower temperatures please contact us)
Model:
° - Standard
Heat recovery:
Version:
° - Standard
L - Low noise
Condenser:
° - PED regulation
E - Evaporating unit (delivered with holding charge only)
Power supply:
* (not available for sizes 2502 and 2802)
5 - 500V 3~ 50Hz with fuses
Attention: The standard options are shown by the symbol °
Example of configuration code: WSA1602L8
This is a WSA unit, size 1602 in low noise version, with heat exchangers to PED regulations, and with electrical panel and compressor motors at
400V 3~ 50Hz with circuit breakers. Since each option is uniquely identified it is not necessary to indicate the standard options (represented by °) in
the unit configurator.
Accessories
• PRV3: Remote control of the chiller operating
functions.
only.
• AVX: Spring anti-vibration mounts.
250
- AERWEB300-6: Web server to monitor and • MULTICHILLER: Control system for multiple
remote control max. 6 units in RS485 netparallel installed constant flow chillers prowork;
capability.
remote control max. 18 units in RS485 net- • AKW: ACOUSTIC KIT: Allows further unit
work;
sound reduction using an optimised enclosure
made from a high density ecological material.
• SAP: A series of remote buffer tanks and pumps
are available. Refer to the technical manual.
251
Technical Data
Mod WSA
Cooling capacity
Total input power
Water flow rate evaporator
Pressure drop evaporator
Water flow rate condenser
Pressure drop condenser
Heating capacity
Total input power
E.E.R.
E.E.R. *
EEEC(1)
C.O.P.
C.O.P. *
EEEC(1)
Power supply
Input current cooling
Input current heating
Compressor
Quantity
Part load (standard expansion valve)
Part load (electronic expansion valve)
Evaporator
Quantity
Evaporator hydraulic connection
Condenser
Quantity
Condenser hydraulic connection
Sound pressure(2)
Dimensions (mm)
kW
kW
l/h
kPa
l/h
kPa
kW
kW
l/h
kPa
l/h
kPa
W/W
W/W
W/W
W/W
A
A
A
A
Type
n°
%
%
Type
n°
Ø
Type
Type
n°
Ø
Type
db(A)
0701
179
37
30790
20
37150
27
191
43
32850
41
25460
12
4,84
6,02
B
4,44
5,36
B
0801
213
42
36640
20
43860
27
218
48
37500
20
29240
12
5,07
6,31
A
4,54
5,48
A
0901
234
48
40250
19
48500
26
245
56
42140
19
32510
12
4,88
6,07
B
4,38
5,28
B
1101
294
58
50570
23
60540
31
308
70
52980
24
40940
14
5,07
6,31
A
4,40
5,31
B
1402
1602
1802
2002
2202
2502
357
423
470
529
588
663
74
83
97
106
115
131
61400 72760 80840 90980 101140 114040
36
40
41
45
48
53
74130 87030 97520 109280 120920 136570
50
55
58
62
67
75
375
434
491
557
625
687
86
97
111
126
140
151
64500 74650 84450 95810 107500 118160
36
39
42
46
50
55
49710 57960 65360 74160 83420 92190
22
24
25
27
29
32
4,82
5,10
4,85
4.97
5,11
5,06
5,99
6,34
6,03
B
A
B
B
A
A
4,36
4,47
4,42
4.43
4,46
4,55
5,26
5,39
5,33
B
A
B
B
A
A
400V 3~ 50 Hz
66
74
82
101
132
148
164
184
203
233
73
82
91
117
146
164
183
209
235
257
124
144
162
182
248
288
324
344
364
430
163
192
229
300
287
336
391
462
482
575
Twin-rotor screw
1
1
1
1
2
2
2
2
2
2
40-100 40-100 40-100 40-100 20-100 20-100 20-100 20-100 20-100 20-100
25-100 25-100 25-100 25-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100
Plate
1
1
1
1
1
1
1
1
1
1
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
Victaulic
Plate
1
1
1
1
1
1
1
1
1
1
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
Victaulic
54
54
54
60
57
57
57
61
63
63
2802
715
140
122980
62
147060
88
767
172
131920
74
102340
44
5,11
A
4,46
A
233
258
430
575
2
20-100
12,5-100
1
3”
1
3”
Mod WSA (°E - L)
Height (A) °- E
Height (A) L - LE
Width (B)
Length (C)
63
Weight
Mod WSA - E
Cooling capacity
Total input power
Water flow rate evaporator (7 °C)
E.E.R.
EEEC(1)
Power supply
Compressor
Quantity
Evaporator
Quantity
Sound pressure(2)
kW
kW
l/h
kPa
W/W
A
A
A
Type
n°
%
%
Type
n°
Ø
Type
db(A)
0701
163
41
28040
18
3.98
A
0801
192
47
33020
18
4.09
A
0901
212
54
36460
17
3.93
A
1101
263
66
45240
21
3.98
A
1402
1602
1802
2002
2202
2502
2802
326
385
428
481
539
601
676
82
93
108
120
132
146
159
56070 66220 73620 82790 92710 103370 116270
33
37
38
40
45
49
59
3.98
4.14
3.96
4.00
4.08
4.12
4.25
A
A
A
A
A
A
A
400V 3~ 50 Hz
72
81
90
113
144
162
180
204
226
254
272
124
144
162
182
248
288
324
344
364
430
430
163
192
229
300
287
336
391
462
482
575
575
Twin-rotor screw
1
1
1
1
2
2
2
2
2
2
2
40-100 40-100 40-100 40-100 20-100 20-100 20-100 20-100 20-100 20-100 20-100
25-100 25-100 25-100 25-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100
Plate
1
1
1
1
1
1
1
1
1
1
1
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
Victaulic
54
54
54
60
57
57
57
63
63
63
63
Mod WSA (° - L)
Height (A) °
Height (A) L
Width (B)
Length (C)
Weight
mm
mm
mm
mm
kg (°)
kg (L)
kg (D/DE)
mm
mm
mm
mm
kg
0701
1775
1775
810
2960
1251
1379
1479
0801
1775
1775
810
2960
1301
1429
1529
0901
1775
1775
810
2960
1357
1485
1585
1101
1775
1775
810
3360
1788
1934
2045
1402
1975
2120
810
2960
2028
2256
2256
1602
1975
2120
810
2960
2097
2325
2325
1802
2005
2120
810
2960
2169
2397
2397
2002
1985
2120
810
3360
2598
2855
2855
2202
2065
2120
810
3360
3000
3257
3257
2502
2065
2120
810
3360
3095
3352
3352
2802
2065
2120
810
3360
3095
3352
3352
0701 T
2000
2120
810
2960
1479
0801 T
2000
2120
810
2960
1529
0901 T
2000
2120
810
2960
1585
1101 T
2000
2120
810
3360
2045
1402 T
2050
2120
1250
3060
2294
1602 T
2050
2120
1250
3060
2363
1802 T
2050
2120
1250
3060
2435
2002 T
2050
2120
1250
3460
2894
2202 T
2065
2120
1250
3460
3296
2502 T
2065
2120
1250
3460
3391
2802 T
2065
2120
1250
3460
3391
(1) EEEC EUROVENT energy efficiency class
(2) Sound pressure measured in free field with directivity factor 2 at 10 m distance, in accordance with ISO 3744.
Cooling:
entering condenser water temperature 30 °C
∆t = 5K
-
Evaporating unit:
leaving evaporator water temperature 7 °C
refrigerant condensing temperature 45 °C
∆t = 5K
252
-
Heating:
entering evaporator water temperature 10 °C
∆t = 5 K
Cod.: SWSAUY.14 / 1201
-
253
WSB
Water cooled chillers and heat pumps with twin-rotor screw compressor
R134a
Mod
Vers.
AERWEB300
MULTICHILLER
AER485P1
RIF
PRV3
°/L
E
AVX
D
T
DE
AKW
0701
✔
✔
✔
161
✔
651
668
651
651
668
✔
0801
✔
✔
✔
161
✔
651
668
651
652
668
✔
0901
✔
✔
✔
201
✔
651
668
652
652
668
✔
1101
✔
✔
✔
241
✔
653
669
653
654
669
✔
1402
✔
✔
✔(x2)
161(x2)
✔
656
670
658
662
670
✔
1602
✔
✔
✔(x2)
161(x2)
✔
658
670
658
662
670
✔
1802
✔
✔
✔(x2)
201(x2)
✔
658
670
659
662
670
✔
2002
✔
✔
✔(x2)
201-241
✔
667
671
667
663
671
✔
2202
✔
✔
✔(x2)
241(x2)
✔
660
672
660
664
672
✔
2502
✔
✔
✔(x2)
301(x2)
✔
661
672
661
664
672
✔
2802
✔
✔
✔(x2)
301(x2)
✔
661
672
661
664
672
✔
Unit Configurator
requirements.
Configuration Fields:
1 2 3
4 5 6 7
8
9
10
11
12
13
||||||||
Code
Heat recovery
|
Condenser
|
||||
Size ModelVersion
Power supply
Feaures
• Versions for cooling only, heat pump or evaporating unit (delivered with holding charge
only)
• Partial or total heat recovery options
- leaving water temperature up to 55 °C in heat
pump mode
• Version L:
- Low noise with sound absorbent galvanised
sheet panels
100% with standard thermostatic expansion
valve. (25 to 100% with electronic expansion
valve option)
• Compressor discharge and liquid line isolating valves
• Current transformer as standard for each compressor
units
• Automatic set point compensation using analogue inputs 4-20 mA or 0–10 V or an exter-
nal air sensor
operation)
Accessories
functions.
• RIF: Power factor correction. Connected in parallel to the motor allowing about 10% reduction of input current. Must be requested at time
of order and is available factory fitted only.
254
- AERWEB300-6: Web server to monitor and • SAP: A series of remote buffer tanks and pumps
remote control max. 6 units in RS485 netare available. Refer to the technical manual.
work;
parallel installed constant flow chillers providremote control max. 18 units in RS485 neting individual chiller on/off and control capawork;
bility.
- AERWEB300-6G: Web server to monitor and • AKW: ACOUSTIC KIT: Allows further unit
remote control max. 6 units in RS485 netsound reduction using an optimised enclosure.
remote control max. 18 units in RS485 net-
Code:
WSB
Size:
0701, 0801, 0901, 1101, 1402, 1602, 1802, 2002, 2202, 2502, 2802
Expansion device:
X - With electronic expansion valve
Model:
° - Standard
Heat recovery:
Version:
° - Standard
L - Low noise
Condenser:
° - PED regulation
E - Evaporating unit (delivered with holding charge only)
Power supply:
* (not available for sizes 2502 and 2802)
Example of configuration code: WSB1602L8
This is a WSB unit, size 1602 in low noise version, with heat exchangers to PED regulations, and with electrical panel and compressor motors at
400V 3~ 50Hz with circuit breakers. Since each option is uniquely identified it is not necessary to indicate the standard options (represented by °)
in the unit configurator.
255
Technical Data
Mod WSB
Cooling capacity
Total input power
Heating capacity
Total input power
E.E.R.
E.E.R. *
EEEC(1)
C.O.P.
C.O.P. *
EEEC(1)
Power supply
Compressor
Quantity
Evaporator
Quantity
Condenser
Quantity
Sound pressure
Dimensions (mm)
1402
1602
1802
2002
2202
2502
344
397
453
507
566
648
74
84
97
107
117
132
59170 68280 77920 87150 97350 111460
52
57
54
56
58
57
71900 82730 94600 105520 117480 134160
73,0
79,0
77,0
79
82,0
81,0
361
417
474
540
606
677
87
98
112
127
141
153
62090 71720 81530 92820 104230 116440
54
57
56
63
62
59
47130 54870 62260 71030 79980 90130
31
34
33
34
36
35
4,65
4,73
4,67
4.74
4,84
4,91
5,88
5,81
B
B
B
B
B
B
W/W
4,15
4,26
4,23
4.26
4,30
4,42
W/W
5,14
5,10
B
B
B
B
B
B
400V 3~ 50Hz
A
66
74
82
102
132
149
165
184
205
233
A
73
82
91
118
147
166
184
210
237
259
A
124
144
162
182
248
288
324
344
364
430
A
163
192
229
300
287
336
391
462
482
575
Type
Twin-rotor screw
n°
1
1
1
1
2
2
2
2
2
2
%
40-100 40-100 40-100 40-100 20-100 20-100 20-100 20-100 20-100 20-100
%
25-100 25-100 25-100 25-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100
Type
Piastre
n°
1
1
1
1
1
1
1
1
1
1
Ø
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
Type
Victaulic
Type
Plate
n°
1
1
1
1
1
1
1
1
1
1
Ø
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
Type
Victaulic
dB(A)
58
58
59
60
61
61
62
63
63
63
kW
kW
l/h
kPa
l/h
kPa
kW
kW
l/h
kPa
l/h
kPa
W/W
W/W
0701
172
37
29580
40
35950
56,0
184
44
31650
41
24080
24
4,65
B
4,18
B
0801
201
42
34570
35
41800
47,8
211
49
36290
35
27860
21
4,79
5,96
B
4,31
5,20
B
0901
226
49
38870
30
47300
42,2
241
56
41450
31
31820
19
4,61
5,73
B
4,30
5,19
B
1101
281
58
48330
34
58310
47,3
303
71
52120
36
39900
21
4,84
6,02
B
4,27
5,15
B
2802
704
140
121090
67
145170
95,0
741
173
127450
80
97700
47
5,03
B
4,28
B
233
259
430
575
2
20-100
12,5-100
1
3”
1
3”
63
* = Energy indices in the conditions provided by the Finance Act
Mod WSB - E
Cooling capacity
Total input power
Water flow rate evaporator (7 °C)
E.E.R.
EEEC(1)
Power supply
Compressor
Quantity
Evaporator
Quantity
Sound pressure(2)
1402
1602
1802
2002
2202
2502
2802
311
365
410
465
521
594
665
82
92
107
120
131
146
159
53490 62780 70520 79924 89610 102170 114380
48
53
50
51
54
53
64
3.79
3.97
3.83
3.88
3.98
4.07
4.18
A
A
A
A
A
A
A
400V 3~ 50Hz
A
71
81
89
113
143
161
178
203
226
254
272
A
124
144
162
182
248
288
324
344
364
430
430
A
225
264
310
391
287
336
391
462
482
575
575
Type
Twin-rotor screw
n°
11
1
1
1
2
2
2
2
2
2
2
%
40-100 40-100 40-100 40-100 20-100 20-100 20-100 20-100 20-100 20-100 20-100
%
25-100 25-100 25-100 25-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100 12,5-100
Type
Plate
n°
1
1
1
1
1
1
1
1
1
1
1
Ø
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
3”
Type
Victaulic
dB(A)
58
58
59
60
61
61
62
61
63
63
63
kW
kW
l/h
kPa
W/W
0701
155
41
26660
40
3.78
A
0801
185
46
31820
35
4.02
A
0901
207
53
35600
30
3.91
A
1101
258
66
44380
34
3.91
A
Mod WSB (° - L)
Height (A) °
Height (A) L
Width (B)
Length (C)
Weight
Mod WSB (° - L)
Height (A) °
Height (A) L
Width (B)
Length (C)
Weight
mm
mm
mm
mm
kg (°)
kg (L)
kg (D/DE)
mm
mm
mm
mm
kg
0701
1775
1775
810
2960
1251
1379
1479
0801
1775
1775
810
2960
1301
1429
1529
0901
1775
1775
810
2960
1357
1485
1585
1101
1775
1775
810
3360
1788
1934
2045
1402
1975
2120
810
2960
2028
2256
2256
1602
1975
2120
810
2960
2097
2325
2325
1802
2005
2120
810
2960
2169
2397
2397
2002
1985
2120
810
3360
2598
2855
2855
2202
2065
2120
810
3360
3000
3257
3257
2502
2065
2120
810
3360
3095
3352
3352
2802
2065
2120
810
3360
3095
3352
3352
0701 T
2000
2120
810
2960
1479
0801 T
2000
2120
810
2960
1529
0901 T
2000
2120
810
2960
1585
1101 T
2000
2120
810
3360
2045
1402 T
2050
2120
1250
3060
2294
1602 T
2050
2120
1250
3060
2363
1802 T
2050
2120
1250
3060
2435
2002 T
2050
2120
1250
3460
2894
2202 T
2065
2120
1250
3460
3296
2502 T
2065
2120
1250
3460
3391
2802 T
2065
2120
1250
3460
3391
(1)EEEC EUROVENT energy efficiency class
Cooling:
∆t = 5K
-
Evaporating unit:
leaving evaporator water temperature 7 °C
refrigerant condensing temperature 45°C
∆t = 5K
256
-
Heating:
leaving water temperature 45°C
entering evaporator water temperature 10°C
∆t = 5 K
Cod.: SWSBUY.10 / 1007
-
The technical data in this document are not binding. Aermec
S.p.A. shall have the right to introduce at any time whatever
modifications deemed necessary for the improvement of the
product.
257
WSH
Water cooled reverse cycle heat pumps with twin-rotor screw compressor
R134a
Mod
AERWEB300
MULTICHILLER
AER485P1
RIF
PRV3
Vers.
AVX
AKW
-
°/L
D
-
0701
✔
✔
✔
161
✔
665
665
✔
0801
✔
✔
✔
161
✔
665
665
✔
0901
✔
✔
✔
201
✔
665
665
✔
1101
✔
✔
✔
241
✔
666
666
✔
1402
✔
✔
✔(x2)
161(x2)
✔
662
662
✔
1602
✔
✔
✔(x2)
161(x2)
✔
662
662
✔
1802
✔
✔
✔(x2)
201(x2)
✔
662
662
✔
2002
✔
✔
✔(x2)
201-241
✔
663
663
✔
2202
✔
✔
✔(x2)
241(x2)
✔
664
664
✔
2502
✔
✔
✔(x2)
301(x2)
✔
664
664
✔
Unit Configurator
requirements.
1 2 3
4 5 6 7
8
9
10
11
12
13
||||||||
Code
Heat recovery
|
Condenser
|
||||
Size ModelVersion
Power supply
•
•
REFRIGERANT REVERSING VALVE
oPTIONAL eleCtronic EXPANSION VALVE WHICH ALLOWS:
- COOLING DOWN TO -6 °C
- MODULATING CAPACITY CONTROL 25-100% Characteristics
• Versions for cooling only - heat pump with
refrigerant reversing valve
• Partial heat recovery option
- leaving water temperature up to 55 °C in
heat pump mode
• Version X:
- leaving liquid temperature down to -6 °C
• Version L:
- low noise
• High efficiency, low noise screw compressors with modulating capacity control from
40 to 100% with standard thermostatic
expansion valve. (25 to 100% with electron-
ic expansion valve option)
• Compressor discharge and liquid line isolating valves
• Current transformer as standard for each
compressor
units
• Automatic set point compensation using
analogue inputs 4-20 mA or 0–10 V or an
external air sensor
limiting of the unit during times of insufficient electrical power (load peaks or generator operation)
Code:
WSH
Size:
0701, 0801, 0901, 1101, 1402, 1602, 1802, 2002, 2202, 2502
Expansion device:
X - With electronic expansion valve that allows:
- Leaving liquid temperature down to -6 °C
- Modulating capacity control (25 - 100%)
Model:
° - Standard
Heat recovery:
Version:
° - Standard
L -Low noise
Condenser:
° - PED regulation
Power supply:
* (not available for size 2502)
Example of configuration code: WSH1602L8
This is a WSH unit, size 1602 in low noise version, with heat exchangers to PED regulations, and with electrical panel and compressor motors at
400V 3~ 50Hz with circuit breakers. Since each option is uniquely identified it is not necessary to indicate the standard options (represented by °)
in the unit configurator.
Accessories
are available. Refer to the technical manual.
remote control max. 6 units in RS485 net- • MULTICHILLER: Control system for multiple
work;
parallel installed constant flow chillers providfunctions.
ing individual chiller on/off and control capa• RIF: Power factor correction. Connected in parremote control max. 18 units in RS485 netbility.
allel to the motor allowing about 10% reducwork;
• AKW: ACOUSTIC KIT: Allows further unit
tion of input current. Must be requested at time
sound reduction using an optimised enclosure
of order and is available factory fitted only.
remote control max. 6 units in RS485 netmade from a high density ecological material.
remote control of a chiller through a comremote control max. 18 units in RS485 netmon PC and an ethernet connection over a
• SAP: A series of remote buffer tanks and pumps
258
259
Technical Data
Mod WSH
Cooling capacity
Total input power
Heating capacity
Total input power
E.E.R.
E.E.R. *
EEEC(1)
C.O.P.
C.O.P. *
EEEC(1)
Power supply
Compressor
Evaporator
Quantity
Condenser
Quantity
Sound pressure(2)
Dimensions (mm)
kW
kW
l/h
kPa
l/h
kPa
kW
kW
l/h
kPa
l/h
kPa
W/W
W/W
W/W
W/W
A
A
A
A
Type
%
%
Type
n°
Ø
Type
Type
n°
Ø
Type
db(A)
0701
166
36
28550
23
34740
30
183
44
31480
24
23910
15
4,61
5,53
C
4.16
5,22
B
0801
196
41
33710
24
40760
31
210
50
36120
23
27520
15
4,78
5,74
B
4.20
5,27
B
0901
217
47
37320
22
45410
30
237
57
40760
23
30960
14
4,62
5,54
C
4.16
5,22
B
1101
270
57
46440
27
56240
36
300
72
51600
29
39220
18
4,74
5,69
B
4.17
5,23
B
65
81
124
163
73
91
144
192
80.6
101
162
229
100
130.5
182
300
40-100
25-100
40-100
25-100
40-100
25-100
40-100
25-100
1402
1602
360
428
76
88
61920
73620
43
47
74990
88750
57
62
420
490
98
116
72240
84280
57
62
55380
64330
27
29
4,74
4,86
5,69
5,83
B
B
4.29
4.22
5,38
5,30
B
B
400V 3~ 50Hz
135
146.5
178.5
210
248
288
287
336
bi-vite
20-100 20-100
20-100
20-100
20-100
20-100
12,5-100
12,5-100
12,5-100
12,5-100
12,5-100
1
3”
1
3”
1
3”
1
3”
1
3”
1
3”
1
3”
1
3”
57
61
63
63
12,5-100
1802
466
99
80150
48
97180
65
540
125
92880
63
71380
29
4,71
5,65
B
4.32
5,42
B
2002
526
109
90470
59
109220
79
620
144
106640
72
81870
32
4,83
5,80
B
4.31
5,40
B
2202
594
120
102170
65
122810
88
700
162
120400
79
92540
36
4,95
5,94
B
4.32
5,42
B
2502
672
138
115580
74
139320
101
784
176
134850
90
104580
40
4,87
5,84
B
4.45
5,59
A
162
221
324
391
187.5
256.5
344
462
210
291
364
482
242
320
430
575
A
C
B
Piastre
1
3”
1
3”
1
3”
1
3”
1
3”
1
3”
1
3”
1
3”
54
54
54
60
1
1
3”
3”
Victaulic
Piaste
1
1
3”
3”
Victaulic
57
57
* = Energy indices in the conditions provided by the Finance Act
(1)EEEC EUROVENT energy efficiency class
Mod WSH
Height (A)
Width (B)
Length (C)
Weight (empty)
Cooling
leaving water temperature 7°C
∆t = 5 K
-
mm
mm
mm
mm
kg (°)
kg (D)
0701
1980
2120
810
2960
1391
1622
0801
1980
2120
810
2960
1443
1674
0901
1980
2120
810
2960
1506
1737
1101
2060
2120
810
3360
1946
2200
1402
2000
2120
1260
3060
2276
2542
1602
2000
2120
1260
3060
2350
2616
1802
2000
2120
1260
3060
2423
2689
2002
2000
2120
1260
3460
2872
3168
2202
2060
2120
1260
3460
3309
3605
2502
2060
2120
1260
3460
3407
3703
Heating
entering evaporator water temperature 10 °C
∆t = 5 K
Cod.: SWSHUY.06 / 1007
-
(°)
L
260
261
Technical data
TW110
Water cooled modular chiller with centrifugal compressor
R134a
Mod.
Cooling capacity
Total input power
Input current
Evaporator water flow rate (7 °C)
Condenser water flow rate (30 °C)
 Sound pressure
Evaporator water connections*
Condenser water connections*
Maximum current.
Starting current
kW
kW
A
l/h
kPa
l/h
kPa
dB(A)
Ø
Ø
A
A
TW 110
285
56,4
88
49020
30
58720
43
45.5
3”
3”
134
6
-
*
Cooling
condenser entering water temperature 30 °C;
∆t = 5 °C;
 Sound pressure measured in free field
conditions at a distance of 10 m with
directivity factor = 2. In accordance with
ISO 3744.
V = Victaulic connection
Dimensions (mm)
OUT
Condenser
IN
Condenser
IN
evaporator
OUT
evaporator
Characteristics
• New generation two-stage oil free centrifugal
compressor with magnetic levitation friction
free bearings
• Plate heat exchangers optimised for use with
refrigerant R134a
• Extremely compact: only 805 mm wide to
allow access through a standard doorway
• Component layout designed to enable several
units to be positioned side by side in restricted plant rooms. Ideal when standby is
required or when cooling duty is to be
increased at a later date
• High efficiency with generously sizes heat
exchanger
• Extraordinary efficiency at part load (up to
active controls
30% higher IPLV when compared with • Microprocessor control system
standard chillers)
• LCD user interface: colour touch-screen with
• Electronic expansion valve
simple and intuitive graphical menu
• Acoustic enclosure: heavy gauge galvanized
Compressor features:
sheet steel with internal acoustic insulation.
• Operates without oil as bearings are magnetic
levitation type. Vibration free and very quiet
• Provided with inverter technology that permits capacity modulation down to 25%
• Integrated controller that reduces starting current to 6 A only
• 5 times lighter than an equivalent screw compressor
• Electronic controller for monitoring and pro-
TW110
Accessories
capability. (When this accessory is present,
the AER485P1TW is factory fitted as standard).
Model
Height
Width
Depth
Weight
[mm] (A)
[mm] (B)
[mm] (C)
kg
TW 110
1727
805
1653
960
Cod.: STWUY.03 / 1212
• AER485P1TW: RS-485 interface for supervision systems with MODBUS protocol.
• PTW: Remote control of chiller operating
functions.
262
263
WF
Water cooled chillers with twin-rotor screw compressor
R134a
ENERG
Y
IJA IE
ENERG
IA EFFICIENCY CLASS
MANUFACTURER
IJA IE
IA EFFICIENCY CLASS
Range
Model
www.eurovent-certification.com
HEAT PUMP
LOCAL DESIGNATION
LOCAL DESIGNATION
LIQUID CHILLING PACKAGE
LOCAL DESIGNATION
LOCAL DESIGNATION
B
A
A
B
C
C
D
D
F
G
AVX compatibility
A
E
Réf. : 08-201103
E
RS 6/C/003-2011 and RS 6/C/003A-2011
2512
2812
3212
3612
4212
4812
5612
6412
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔(x2)
✔(x2)
✔(x2)
✔(x2)
✔(x2)
✔(x2)
✔(x2)
✔(x2)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
RIFWF2512 RIFWF2812 RIFWF3212 RIFWF3612 RIFWF4212 RIFWF4812 RIFWF5612 RIFWF6412
✔
✔
✔
✔
✔
✔
✔
✔
°/A
°/A
°
°
°
°
A
A
A
A
°
°
A
A
Cooling mode at full load
Heating mode at full load
A
Réf. : 08-201103
Y
MANUFACTURER
Range
Model
Mod
AERWEB300
MULTICHILLER
AER485P1
PRV3
AVX
RIF
AKW(WF-L)
IS1
IS2
IS3
F
G
RS 6/C/003-2011 and RS 6/C/003A-2011
• OPTIMISED FOR low condenser temperatures
for example: units working in cooling mode with ground or tower water, or units
working in heat pump mode with low leaving water temperature
• STANDARD AND HIGH EFFICIENCY VERSIONS
• MAXIMUM condenser LEAVING water temperature: 50°C
• SHELL AND TUBE HEAT EXCHANGERS
• standard electronic EXPANSION valve which allows:
- COOLING DOWN TO -6 °C - adjustment of the cooling capacity via continuous modulation 12.5-100% Standard/Low noise
Mod WF
AVX
2512°
673
2812°
673
3212°
673
3612°
674
4212°
674
4812°
674
5612°
675
6412°
675
Mod WF
AVX
High efficiency/High efficiency low noise
Mod WF
AVX
2512°L
673
2812°L
673
3212°L
674
3612°L
674
4212°L
674
4812°L
674
5612°L
675
6412°L
675
2512A
673
2812A
673
3212A
674
3612A
675
4212A
675
4812A
675
5612A
676
6412A
676
Mod WF
AVX
2512AL
674
2812AL
674
3212AL
675
3612AL
675
4212AL
675
4812AL
675
5612AL
676
6412AL
676
RIF - AKW - IS are accessories factory installed only° = versione standard
A = High efficiency version
°L/AL = Low noise version / High efficiency low noise version
Attention: For D - T - E version - please contact us
Unit Configurator
requirements.
Characteristics
- Available in 8 sizes
- Two independent refrigerant circuits
- High efficiency screw compressors optimised
for R134a
- Heat exchangers with oversized surface areas
- Electronic expansion valve as standard
- Compact dimensions
- Suitable for use in heat pump mode with
leaving water temperature up to 50 °C (with
hydraulic system reversing) and with ground
water or geothermal loops. For heating mode
operation the IS accessory, condenser
isolating valves, is required
- condenser leaving water temperature up to
50 °C
- evaporator leaving liquid temperature down
to -6 °C
• Options available:
- partial heat recovery
- total heat recovery
- evaporating unit
- low noise unit with compressor acoustical
enclosures made from galvanised steel and
high density sound absorbent material
• Modulating capacity control microprocessor
system
- Redundancy of the unit (one microprocessor
per circuit)
- Leaving water temperature control with
modulating capacity control (12.5-100% for
each compressor) and dynamic display of the
refrigeration capacity
- Condensing control based on pressure with
0-10 Vdc signal for controlling a modulating
valve / variable speed pump
- Electrical panel with all cables numbered
- Current transformer as standard for each
compressor
- “Always Working” function. In the case of
- Automatic set point compensation using
external air sensor
- Auto-adaptive differential to ensure correct
- PDC (Pull Down Control) system which
prevents capacity loading when the water
temperature quickly approaches the set point
- DL (Demand Limit) system permits current
operation)
- Multilingual display panel
Accessories
•AER485P1: RS-485 interface for supervision
functions.
only.
264
parallel installed constant flow chillers proAERWEB300-6: Web server to monitor and
remote control max. 6 units in RS485 netcapability.
work;
AERWEB300-18: Web server to monitor and • AKW: ACOUSTIC KIT: Allows further unit
sound reduction using an optimised encloremote control max. 18 units in RS485 netsure made from a high density ecological
work;
material. Only available for L Versions.
remote control max. 6 units in RS485 net• IS: Condenser isolating valves. Mandatory
accessory for units operating in heat pump
mode. Factory fitted only.
12
3 4 5 6
7
8
9
10
11
12
||||||||
Code
|
|
Version
|
Heat recovery
|
Power supply
|
Model||
Size VersionEvaporator
Code:
WF
Size:
2512, 2812, 3212, 3612, 4212, 4812, 5612, 6412
Model:
° - Optimised for low condensing temperature
Version:
° - Standard
A - High efficiency
Version:
° - Standard
L - Low noise
Heat recovery:
D - With partial heat recovery
T - With total heat recovery (not available for unit E)
Evaporator:
° - Standard
E - Evaporating unit
Power supply:
° - 400V 3~50Hz with fuses
8 - 400V 3~50Hz with circuit breakers
5 - 500V 3~50Hz with fuses (only for sizes 2512 and 2812)
9 - 500V 3~50Hz with circuit breakers (only for sizes 2512 and
2812)
Example of configuration code: WF2512A8
This is a WF unit, size 2512 in high efficiency version, and with electrical panel and compressor motors at 400V 3~ 50Hz with circuit breakers. Since
each option is uniquely identified it is not necessary to indicate the standard options (represented by °) in the unit configurator.
265
Technical Data
Mod WF
Cooling capacity
Total input power
Input current
EER
EER class (Eurovent)
ESEER
Heating capacity
Total input power
Input current
COP
COP class (Eurovent)
Power supply
Startiing current (LRA)
Twin-rotor screw compressor
Shell and tube evaporator
Evaporator hydraulic connection (victaulic)
Shell and tube condenser
Condenser hydraulic connection (victaulic)
Sound power
Sound pressure (1)
Mod WF
Cooling capacity
Total input power
Input current
EER
ESEER
Heating capacity
Total input power
Input current
COP
COP class (Eurovent)
Power supply
Startiing current (LRA)
Sound power
Sound pressure (1)
kW
kW
l/h
kPa
l/h
kPa
A
W/W
kW
kW
l/h
kPa
l/h
kPa
A
A
A
n°
%
n°
Ø
n°
Ø
dB(A)
dB(A)
kW
kW
l/h
kPa
l/h
kPa
A
W/W
kW
kW
l/h
kPa
l/h
kPa
A
A
A
n°
%
n°
Ø
n°
Ø
dB(A)
dB(A)
2512°
632
122
108704
41
129688
16
212
5,18
A
6,16
678
156
116616
13
89784
28
271
4,35
B
3612°
4212°
4812°
5612°
*6412°
987
1114
1281
1412
1553
190
214
246
272
300
169764
191608
220332
242864
267116
47
43
62
65
75
202444
228416
262644
289648
318716
16
18
24
17
19
317
349
416
457
506
5,19
5,21
5,21
5,19
5,18
A
A
A
A
A
6,18
6,19
6,2
6,18
6,16
1059
1194
1372
1514
1667
243
274
314
348
384
182146
205368
235984
260408
286724
13
14
19
14
15
140350
158240
181976
200552
220676
32
29
43
44
51
406
447
533
585
648
4,36
4,36
4,37
4,35
4,34
B
B
B
B
B
400V-3-50Hz
294
336
396
446
494
572
636
702
447
528
596
659
712
872
968
1156
2
2
2
2
2
2
2
2
12.5-100 12.5-100 12.5-100 12.5-100 12.5-100 12.5-100 12.5-100 12.5-100
1
1
1
1
1
1
1
1
6"
6"
6"
8"
8"
8"
8"
8"
2
2
2
2
2
2
2
2
5"
5"
5"
5"
5"
5"
6"
6"
93,6
94
93,5
93,7
94,6
95,5
97,3
97,9
61,6
62
61,5
61,7
62,6
63,5
65,3
65,9
2512A
641
115
110252
44
130032
63
202
5,57
A
6,63
676
147
116272
51
90986
30
258
4,6
A
2812°
723
139
124356
58
148264
16
243
5,2
A
6,19
775
178
133307
13
102691
39
312
4,35
B
2812A
728
131
125216
59
147748
64
232
5,56
A
6,61
769
167
132268
51
103544
40
297
4,6
A
3212°
875
169
150500
56
179568
18
282
5,18
A
6,16
939
216
161508
14
124356
38
361
4,35
B
3212A
891
160
153252
62
180772
72
268
5,57
A
6,63
940
204
161680
58
126592
42
343
4,61
A
3612A
4212A
4812A
5612A
*6412A
1007
1137
1282
1417
1554
180
203
229
258
285
173204
195564
220504
243724
267288
44
62
42
41
51
204164
230480
259892
288100
316308
69
69
74
74
77
303
332
392
437
483
5,59
5,6
5,6
5,49
5,45
A
A
A
A
A
6,66
6,67
6,66
6,54
6,49
1062
1199
1353
1501
1648
231
260
293
330
364
182664
206228
232716
258172
283456
56
55
59
59
62
142932
161508
182320
201412
220848
30
42
29
28
35
388
425
501
559
619
4,6
4,61
4,62
4,55
4,53
A
A
A
A
A
400V-3-50Hz
294
336
396
446
494
572
636
702
447
528
596
659
712
872
968
1156
2
2
2
2
2
2
2
2
12.5-100 12.5-100 12.5-100 12.5-100 12.5-100 12.5-100 12.5-100 12.5-100
1
1
1
1
1
1
1
1
8"
8"
8"
10"
10"
10"
10"
10"
2
2
2
2
2
2
2
2
4"
4"
5"
5"
5"
5"
6"
6"
93,6
94
93,5
93,7
94,6
95,5
97,3
97,9
61,6
62
61,5
61,7
62,6
63,5
65,3
65,9
Mod WF
Cooling capacity
Total input power
Input current
EER
Power supply
Evaporator hydraulic connections (victaulic)
Sound power
Sound pressure (1)
Mod WF
Cooling capacity
Total input power
Input current
EER
Power supply
Evaporator hydraulic connections (victaulic)
Sound power
Sound pressure (1)
kW
kW
l/h
kPa
A
A
A
n°
%
n°
Ø
dB(A)
dB(A)
kW
kW
l/h
kPa
A
A
A
n°
%
n°
Ø
dB(A)
dB(A)
2512°E
547
143
94084
31
242
3,83
A
2812°E
624
162
107328
43
277
3,85
A
3212° E
748
195
128656
41
321
3,84
A
294
447
2
35-100
1
6"
93,6
61,6
336
528
2
35-100
1
6"
94
62
396
596
2
35-100
1
6"
93,5
61,5
2512AE
585
143
100620
36
242
4,09
A
2812AE
665
162
114380
49
277
4,1
A
3212AE
800
195
137600
50
321
4,1
A
294
447
2
35-100
1
8"
93,6
61,6
336
528
2
35-100
1
8"
94
62
396
596
2
35-100
1
8"
93,5
61,5
3612°E
4212° E
842
954
221
247
144824
164088
34
31
363
398
3,81
3,86
A
A
400V-3-50Hz
446
494
659
712
2
2
35-100
35-100
1
1
8"
8"
93,7
94,6
61,7
62,6
4812°E
1077
279
185244
44
465
3,86
A
5612°E
1208
313
207776
47
516
3,86
A
6412°E
1328
345
228416
55
571
3,85
A
572
872
2
35-100
1
8"
95,5
63,5
636
968
2
35-100
1
8"
97,3
65,3
702
1156
2
35-100
1
8"
97,9
65,9
3612AE
4212AE
899
1016
221
248
154628
174752
35
49
363
400
4,07
4,1
A
A
400V-3-50Hz
446
494
659
712
2
2
35-100
35-100
1
1
10"
10"
93,7
94,6
61,7
62,6
4812AE
1148
280
197456
34
465
4,1
A
5612AE
1246
313
214312
31
518
3,98
A
6412AE
1382
346
237704
40
573
3,99
A
572
872
2
35-100
1
10"
95,5
63,5
636
968
2
35-100
1
10"
97,3
65,3
702
1156
2
35-100
1
10"
97,9
65,9
Performance values refers to the following conditions:
Cooling:
- Evaporator water (in/out) 12°C/7°C
- Condensing temperature 45°C
Dimensions (mm)
Mod WF
Height (A)
Width (B)
Length (C)
Weight
mm
mm
mm
Kg
2512°
2100
1470
3690
3570
2812°
2100
1470
3690
3650
3212°
2050
1470
4030
4470
3612°
2120
1520
4030
4750
4212°
2140
1550
4370
5050
4812°
2140
1550
4370
5180
5612°
2210
1600
4610
6030
6412°
2210
1600
4760
6260
Mod WF
Height(A)
Width (B)
Length (C)
Weight
mm
mm
mm
Kg
2512A 2812A 3212A 3612A 4212A 4812A 5612A 6412A
2180
2180
2190
2340
2340
2340
2380
2380
1470
1470
1537
1695
1695
1695
1700
1700
4330
4330
4330
4370
4550
4550
4800
4800
4080
4140
5470
5950
6240
6440
7230
7360
Attention: For the dimensions of versions D - T - L - E contact the head office
Code: SWFUY.04 / 1008
Technical data
* Models are not certified to Eurovent
Performance values refers to the following
conditions:
266
Cooling:
- Condenser water (in/out) 30°C/35°C
Heating:
- With condenser isolating valves (mandatory accessory)
267
HWF
Mod
AERWEB300
MULTICHILLER
AER485P1
PRV3
AVX
RIF
AKW(WF-L)
IS1
IS2
IS3
Water cooled chillers with twin-rotor screw compressor
ENERG
Y
IJA IE
ENERG
IA EFFICIENCY CLASS
MANUFACTURER
IA EFFICIENCY CLASS
LIQUID CHILLING PACKAGE
LOCAL DESIGNATION
LOCAL DESIGNATION
Heating mode at full load
B
Cooling mode at full load
A
A
B
C
C
D
D
F
G
A
F
G
RS 6/C/003-2011 and RS 6/C/003A-2011
• OPTIMISED FOR high condenser temperatures
for example: units operating in heating mode
• STANDARD AND HIGH EFFICIENCY VERSIONS
• MAXIMUM condenser LEAVING water temperature: 60°C
• SHELL AND TUBE HEAT EXCHANGERS
• standard electronic EXPANSION valve which allows:
- COOLING DOWN TO -6 °C
- CAPACITY modulation 12.5-100% -
-
-
-
partial heat recovery
total heat recovery
evaporating unit
low noise unit with compressor acoustical
enclosures made from galvanised steel and
high density sound absorbent material
- Redundancy of the unit (one microprocessor
per circuit)
- Leaving water temperature control with
modulating capacity control (12.5-100% for
each compressor) and dynamic display of the
refrigeration capacity
- Condensing control based on pressure with
0-10 Vdc signal for controlling a modulating
valve / variable speed pump
- Electrical panel with all cables numbered
- Current transformer as standard for each
compressor
- “Always Working” function. In the case of
- Automatic set point compensation using
external air sensor
- Auto-adaptive differential to ensure correct
- PDC (Pull Down Control) system which
prevents capacity loading when the water
temperature quickly approaches the set point
- DL (Demand Limit) system permits current
operation)
- Multilingual display panel
Accessories
remote control max. 6 units in RS485 net- • AKW: ACOUSTIC KIT: Allows further unit
work;
sound reduction using an optimised enclo• PRV3: Remote control of the chiller operating
sure made from a high density ecological
functions.
remote control max. 18 units in RS485 netmaterial. Only available for L Versions.
work;
AERWEB300-6G: Web server to monitor and • IS: Condenser isolating valves. Mandatory
remote control max. 6 units in RS485 netaccessory for units operating in heat pump
mode.
only.
AERWEB300-18G: Web server to monitor and Factory fitted only.
remote control max. 18 units in RS485 net• AERWEB300: Accessory AERWEB allows
remote control of a chiller through a com- • MULTICHILLER: Control system for multiple
parallel installed constant flow chillers procommon browser; 4 versions available:
capability.
268
2512°
673
2812°
673
3212°
673
3612°
674
4212°
674
4812°
674
5612°
675
6412°
675
Mod HWF
2512°L
2812°L
AVX
673
673
High efficiency/High efficiency low noise
Mod HWF
2512A
2812A
AVX
673
673
3212°L
674
3612°L
674
4212°L
674
4812°L
674
5612°L
675
6412°L
675
3212A
674
3612A
675
4212A
675
4812A
675
5612A
676
6412A
676
Mod HWF
AVX
3212AL
675
3612AL
675
4212AL
675
4812AL
675
5612AL
676
6412AL
676
2512AL
674
2812AL
674
(x2) Indicate the quantity to be ordered
RIF - AKW - IS are accessories factory installed only
° = Standard version
A = High efficiency version
°L/AL = Low noise version / High efficiency low noise version
Attention: For D - T - E versions contact the facory
Unit Configurator
requirements.
Characteristics
- Available in 8 sizes
- Two independent refrigerant circuits
- High efficiency screw compressors optimised
for R134a
- Heat exchangers with oversized surface areas
- Electronic expansion valve as standard
- Compact dimensions
- Suitable for use in heat pump mode with
leaving water temperature up to 60 °C (with
hydraulic system reversing) and with ground
water or geothermal loops. For heating mode
operation the IS accessory, condenser
isolating valves, is required
- condenser leaving water temperature up to
60 °C
- evaporator leaving liquid temperature down
to -6 °C
• Options available:
Standard/Low noise
Mod HWF
AVX
E
Réf. : 08-201103
E
RS 6/C/003-2011 and RS 6/C/003A-2011
AVX compatibility
Range
Model
HEAT PUMP
LOCAL DESIGNATION
LOCAL DESIGNATION
A
Réf. : 08-201103
IJA IE
MANUFACTURER
Range
Model
Aermec
program: LCP / W / P / R up to 1500 kW
Y
2512
2812
3212
3612
4212
4812
5612
6412
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ (x2)
✔ (x2)
✔ (x2)
✔ (x2)
✔ (x2)
✔ (x2)
✔ (x2)
✔ (x2)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
RIFHWF 2512 RIFHWF 2812 RIFHWF 3212 RIFHWF 3612 RIFHWF 4212 RIFHWF 4812 RIFHWF 5602 RIFHWF 6412
✔
✔
✔
✔
✔
✔
✔
✔
°/A
°/A
°
°
°
°
A
A
A
A
°
°
A
A
123
4 5 6 7
8
9
10
11
12
13
||||||||
Code
|
|
Version
|
Heat recovery
|
Power supply
|
Model||
SizeVersion
Evaporator
Code:
HWF
Size:
2512, 2812, 3212, 3612, 4212, 4812, 5612, 6412
Model:
° - Optimised for high condensing temperature
Version:
° - Standard
A - High efficiency
Version:
° - Standard
L - Low noise
Heat recovery units:
D - With partial heat recovery
T - With total heat recovery (not available for unit E)
Evaporator:
° - Standard
E - Evaporating unit
Power supply:
° - 400V 3~50Hz with fuses
8 - 400V 3~50Hz with circuit breakers
5 - 500V 3~50Hz with fuses (only for sizes 2512 and 2812)
9 - 500V 3~50Hz with circuit switches (only for sizes 2512 and
2812)
Example of configuration code: HWF2512A8
This is a HWF unit, size 2512 in high efficiency version, and with electrical panel and compressor motors at 400V 3~ 50Hz with circuit breakers.
Since each option is uniquely identified it is not necessary to indicate the standard options (represented by °) in the unit configurator.
269
Technical Data
Mod HWF
Cooling capacity
Total input power
Input current
E.E.R.
E.E.R. class (Eurovent)
E.S.E.E.R.
Heating capacity
Total input power
Input current
C.O.P.
C.O.P. class (Eurovent)
Power supply
Sound power
Sound pressure (1)
Mod HWF
Cooling capacity
Total input power
Input current
E.E.R.
E.E.R. class (Eurovent)
E.S.E.E.R.
Heating capacity
Total input power
Input current
C.O.P.
C.O.P. class (Eurovent)
Power supply
Sound power
Sound pressure (1)
kW
kW
l/h
kPa
l/h
kPa
A
kW
kW
l/h
kPa
l/h
kPa
A
A
A
n°
%
n°
Ø
n°
Ø
db(A)
db(A)
kW
kW
l/h
kPa
l/h
kPa
A
kW
kW
l/h
kPa
l/h
kPa
A
A
A
n°
%
n°
Ø
n°
Ø
db(A)
db(A)
2512°
630
127
108360
41
130204
16
226
4,96
B
5,85
670
149
115240
13
89612
28
267
4,50
A
2812°
716
144
123152
56
147924
16
255
4,97
B
5,87
762
170
131064
12
101824
39
300
4,48
A
3212°
846
169
145512
53
174580
17
286
5,01
B
5,91
898
199
154456
13
120228
36
337
4,51
A
370
545
2
12.5-100
1
6"
2
5"
93,6
61,6
418
613
2
12.5-100
1
6"
2
5"
94,0
62,0
468
670
2
12.5-100
1
6"
2
5"
93,5
61,5
2512A
645
123
110940
44
132096
65
221
5,24
A
6,19
678
145
116616
51
91676
30
261
4,68
A
2812A
733
140
126076
60
150156
66
249
5,24
A
6,18
771
165
132612
52
104232
41
293
4,67
A
3212A
858
164
147584
57
175792
68
278
5,23
A
6,17
902
193
155144
53
121948
39
328
4,67
A
370
545
2
12.5-100
1
8"
2
4"
93,6
61,6
418
613
2
12.5-100
1
8"
2
4"
94,0
62,0
468
670
2
12.5-100
1
8"
2
5"
93,5
61,5
3612°
4212°
949
1095
191
220
163228
188340
44
41
196080
226180
15
17
314
378
4,97
4,98
B
B
5,86
5,87
1009
1163
225
259
173548
200036
12
14
134848
155482
30
28
371
446
4,48
4,49
A
A
400V-3-50Hz
516
612
723
892
2
2
12.5-100 12.5-100
1
1
8"
8"
2
2
5"
5"
93,7
94,6
61,7
62,6
3612A
4212A
969
1112
185
212
166668
191264
41
59
198488
227728
66
67
306
367
5,24
5,25
A
A
6,18
6,19
1019
1168
218
250
175268
200892
51
52
137772
157892
28
40
361
433
4,67
4,67
A
A
400V-3-50Hz
516
612
723
892
2
2
12.5-100 12.5-100
1
1
10"
10"
2
2
5"
5"
93,7
94,6
61,7
62,6
4812°
1261
252
216892
60
260236
23
426
5,00
B
5,90
1338
297
230128
18
179044
41
503
4,50
A
5612°
1421
286
244412
65
293604
18
488
4,97
B
5,86
1512
338
260064
14
201928
45
575
4,47
A
*6412°
1519
305
261268
72
313725
18
530
4,98
B
5,88
1615
360
277780
14
215860
49
625
4,49
A
690
995
2
12.5-100
1
8"
2
5"
95,5
63,5
776
1193
2
12.5-100
1
8"
2
6"
97,3
65,3
846
1340
2
12.5-100
1
8"
2
6"
97,9
65,9
4812A
1253
239
215516
40
256624
72
408
5,24
A
6,19
1317
282
226528
56
178024
28
481
4,67
A
5612A
1439
275
247500
42
294800
77
471
5,23
A
6,17
1513
325
260236
60
204336
29
556
4,66
A
*6412A
1529
293
262992
50
313388
76
514
5,22
A
6,16
1609
346
276748
59
217236
34
606
4,65
A
690
995
2
12.5-100
1
10"
2
5"
95,5
63,5
776
1193
2
12.5-100
1
10"
2
6"
97,3
65,3
846
1340
2
12.5-100
1
10"
2
6"
97,9
65,9
Mod HWF
Cooling capacity
Total input power
Input current
EER
Sound power
Sound pressure (1)
Mod HWF
Cooling capacity
Total input power
Input current
EER
Sound power
Sound pressure (1)
kW
kW
l/h
kPa
A
W/W
2512°E
540
141
92883
30
247
3,83
A
2812°E
615
161
105773
42
278
3,82
A
3212° E
726
189
124872
39
315
3,84
A
A
A
n°
%
n°
Ø
db(A)
db(A)
370
545
2
35-100
1
6"
93,6
61,6
418
613
2
35-100
1
6"
94
62,0
468
670
2
35-100
1
6"
93,5
61,5
kW
kW
l/h
kPa
A
W/W
2512AE
577
143
99244
35
249
4,03
A
2812AE
657
162
113004
48
281
4,06
A
3212AE
779
191
133988
47
318
4,08
A
A
A
n°
%
n°
Ø
db(A)
db(A)
370
545
2
35-100
1
8"
93,6
61,6
418
613
2
35-100
1
8"
94
62,0
468
670
2
35-100
1
8"
93,5
61,5
3612°E
4212° E
816
947
212
246
140352
162884
32
31
345
416
3,85
3,85
A
A
400V-3-50Hz
516
612
723
892
2
2
35-100
35-100
1
1
8"
8"
93,7
94,6
61,7
62,6
4812°E
1070
278
184040
44
465
3,85
A
5612°E
1225
318
210700
49
532
3,85
A
6412°E
1311
340
225492
54
579
3,86
A
690
995
2
35-100
1
8"
95,5
63,5
776
1193
2
35-100
1
8"
97,3
65,3
846
1340
2
35-100
1
8"
97,9
65,9
3612AE
4212AE
873
1012
214
248
150156
174064
33
49
348
418
4,08
4,08
A
A
400V-3-50Hz
516
612
723
892
2
2
35-100
35-100
1
1
10"
10"
93,7
94,6
61,7
62,6
4812AE
1143
280
196596
34
467
4,08
A
5612AE
1263
320
217236
32
534
3,95
A
6412AE
1362
342
234264
39
581
3,98
A
690
995
2
35-100
1
10"
95,5
63,5
776
1193
2
35-100
1
10"
97,3
65,3
846
1340
2
35-100
1
10"
97,9
65,9
Performance values refers to the following conditions:
Cooling:
- Condensing temperature 45°C
Dimensions (mm)
Mod. HWF
Height (A)
Width (B)
Length (C)
Weight
mm
mm
mm
Kg
Mod. HWF
Height (A)
Width (B)
Length (C)
Weight
mm
mm
mm
Kg
2512
2100
1470
3690
3570
2812
2100
1470
3690
3650
3212
2050
1470
4030
4470
3612
2120
1520
4030
4750
4212
2140
1550
4370
5100
4812
2140
1550
4370
5200
5612
2210
1600
4610
6110
6412
2210
1600
4760
6310
2512A 2812A 3212A 3612A 4212A 4812A 5612A 6412A
2180
2180
2190
2340
2340
2340
2380
2380
1470
1470
1537
1695
1695
1695
1700
1700
4330
4330
4330
4370
4550
4550
4800
4800
4080
4140
5470
5950
6290
6460
7310
7410
Attention: For the dimensions of versions D - T - L - E contact the head office
Code: SHWFUY.00 / 1008
Technical Data
Performance values refers to the following
conditions:
270
Cooling:
Heating:
- With condenser isolating valves (mandatory accessory)
The technical data in this document are not binding. Aermec
S.p.A. shall have the right to introduce at any time whatever
modifications deemed necessary for the improvement of the
product.
Aermec S.p.A.
Via Roma, 996 - 37040 Bevilacqua (VR) - 271
Technical data
COOLING CAPACITY
Cooling capacity
Sensitive nominal cooling capacity
Cooling input power
E.E.R.
MOTOR CONDENSING SECTION
Compressors
Type
Number/circuits
Partialisation steps
External fans
Number x input power
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Useful static pressure guaranteed
Air filters
Thickness
Efficiency
Sound pressure
ELECTRIC POWER SUPPLY
Type
RTE H
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
HEATING CAPACITY
HEATING capacity
Heating input power
C.O.P.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
240
standard
260
300
240
ver. (A)
260
350
400
300
kW
kW
kW
77
50,1
20,7
3,72
89
61,2
25,3
3,5
103
67
31,8
3,23
129
77,7
39,7
3,26
143
92,6
44,5
3,2
78
50,7
20,3
3,84
90
62,1
24,8
3,62
n°/n°
%
2/2
2/2
2/2
2/2
2/2
Scroll
2/2
0-50-100
4x0,53
29000
4x0,53
28000
4x0,56
40000
Axial
4x0,56
36000
4x0,53
14500
4
4
4
4
m3/h
n°
Pa
12000
1
200
17000
1
200
20000
1
200
mm
50
G4
50
G4
50
G4
n° x kW 4x0,53
m3/h
32000
n°
dB(A)
72
73
74
240
300
106
68,7
30,7
3,44
69
44,7
24,8
2,77
84,5
58,3
27,3
3,09
102,6
66,7
32,1
3,2
2/2
2/2
2/2
2/2
2/2
4x0,53
14000
4x0,53
16500
4x0,53
9500
4x0,53
9000
4x0,53
11000
4
4
4
12000
1
200
17000
1
200
20000
1
200
50
G4
50
G4
50
G4
A
4
4
4
4
Forward blade centrifugal type
22000 23000 12000 17000 20000
1
1
1
1
1
200
200
200
200
200
50
G4
77
50
G4
50
G4
78
V/ph/Hz
ver. (L)
260
50
G4
72
50
G4
73
74
69
70
71
400V/3N/50Hz
240
76
50
20,4
3,74
standard
260
300
88
105
61
66
25
30,8
3,51
3,4
350
128
77
38,5
3,33
400
141
92
43,1
3,27
240
77
50
20
3,86
ver. (A)
260
89
61
24,4
3,64
300
105
68
30,4
3,44
240
68
44,2
24,4
2,78
ver. (L)
260
83,6
55,6
26,8
3,12
300
101,6
65,9
31,6
3,21
73,4
18,9
3,88
86,3
21,8
3,96
103
26,1
3,94
127,6
34,4
3,71
142,2
38,6
3,68
77,1
19,2
4,01
87,4
22,1
3,95
101,5
26,9
3,77
74,5
19
3,92
83,6
21,8
3,83
98,5
26,5
3,71
2/2
2/2
2/2
2/2
2/2
2/2
2/2
2/2
4x0,53
36000
4x0,53
33000
4x0,53
32000
4x0,56
40000
4x0,53
16500
4x0,53
9500
4x0,53
9000
4x0,53
11000
4
4
4
4
4
4
4
m3/h
n°
Pa
12000
1
200
17000
1
200
20000
1
200
12000
1
200
17000
1
200
20000
1
200
mm
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
Sound pressure
dB(A)
72
73
74
77
78
72
73
74
69
70
71
Type
V/ph/Hz
kW
kW
kW
kW
kW
n°/n°
%
n° x kW
m3/h
n°
Scroll
2/2
2/2
0-50-100
Axial
4x0,56 4x0,53 4x0,53
34200 14500 14000
2/2
4
4
4
4
22000 23000 12000 17000 20000
1
1
1
1
1
200
200
200
200
200
C
B
RTE
Height
Width
Depth
Weight RTE
Weight RTE H
A
B
C
mm
mm
mm
kg
kg
240
1.830
2.166
3.290
1300
1320
260
1.830
2.166
3.290
1390
1410
300
1.830
2.166
3.290
1480
1500
350
1.830
2.166
3.286
1.565
1.645
400
1.830
2.166
3.286
1.645
1.725
Dimensions and weights of the basic set-up unit.
Code : SRTE240_400UY.00 /1007
RTE F
400V/3N/50Hz
* Environment air 20°C d.b., water 80/70°C
Cooling:
- Cooling capacity Tin 27°C RH 50% (Twb 19°C), Text 35°C RH 50%;
278
Heating:
- Heating capacity Tin 20°C RH 50%, Text 7°C RH 70%.
279
Technical data
RTE F
RTE F
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
RTE H
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
HEATING CAPACITY
HEATING capacity
Heating input power
C.O.P.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
480
150
121,1
56,1
2,68
530
179
146
63
2,82
standard
600
198
158
67
2,94
4/2
4/2
4/2
4/2,5
74600
4/2,5
72400
4/2,5
69200
3
4
4
m3/h
n°
Pa
26500
1
200
29500
1
200
31500
1
200
mm
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
79
80
81
84
85
79
80
81
kW
kW
kW
n°/n°
n° x kW
m3/h
n°
dB(A)
kW
kW
kW
kW
kW
n°/n°
n° x kW
m3/h
n°
800
254,8
199,9
92
2,77
Scroll tandem
4/2
Axial
4/2
4/2
84400
80600
4/2
4
4
forward blade centrifugal type
35000
38500
1
1
200
200
V/ph/Hz
480
156
123,6
53,7
2,91
600
208,5
160,8
63,3
3,29
4/2
4/2
4/2
4/2,5
72400
4/2,5
69200
4/2,5
67400
3
4
4
26500
1
200
29500
1
200
31500
1
200
480
147
120
58
3
530
176
145
62
3
standard
600
194,6
156,9
69,1
2,82
151,3
48,1
3,15
178,5
52,5
3,4
202,9
60,4
3,36
4/2
4/2
4/2
4/2,5
74600
4/2,5
72400
4/2,5
69200
3
4
4
700
230,4
182,7
81
2,84
800
254
200
93,1
2,73
231,5
75,6
3,06
266,1
87,1
3,06
Scroll tandem
4/2
4/2
Axial
4/2
4/2
84400
80600
4
4
35000
38500
1
1
200
200
m3/h
n°
Pa
26500
1
200
29500
1
200
31500
1
200
mm
50
G4
50
G4
50
G4
50
G4
dB(A)
79
80
81
84
V/ph/Hz
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
400V/3/50Hz
Cooling:
282
700
232,1
183,4
79,8
2,91
ver. (A)
530
182,7
148,9
59,2
3,08
480
152,9
122,3
54,3
2,82
ver. (A)
530
181,2
146,5
60,6
2,99
600
205,2
156,8
63,3
3,24
159,1
48,7
3,27
183,8
52,8
3,48
208,3
61,5
3,39
4/2
4/2
4/2
4/2,5
72400
4/2,5
69200
4/2,5
67400
3
4
4
26500
1
200
29500
1
200
31500
1
200
50
G4
50
G4
50
G4
50
G4
85
79
80
81
400V/3/50Hz
Heating:
480
530
ver. (L)
600
700
800
kW
kW
kW
148
124
57
2,59
178,6
146,2
61,1
2,92
201,1
159,7
65,5
3,07
231
182,5
80,6
2,86
251
199,9
95,2
2,63
n°/n°
n°
4/2
4
n° x kW
m3/h
4/2,5
57800
n°
3
Scroll tandem
4/2
4/2
4
4
Axial
4/2,5
4/2,5
4/2
55400
51800
63200
4/2
4
4/2
59800
4
4
4
4
29500
31500
35000
38500
1
1
1
1
200
200
200
200
m3/h
n°
Pa
26500
1
200
mm
50
G4
50
G4
50
G4
50
G4
50
G4
dB(A)
76
77
78
81
82
700
229
182
82,2
2,78
800
250,4
198
96,2
2,6
227,7
75
3,03
250,1
85,1
2,94
V/ph/Hz
RTE H
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
HEATING CAPACITY
Heating capacity
Heating input power
C.O.P.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
4/2
4
400V/3/50Hz
kW
kW
kW
kW
kW
n°/n°
n°
480
145,2
118,9
59,1
2,45
530
176,3
145,1
62
2,84
150,1
47,9
3,13
179,6
52,6
3,41
4/2
4
n° x kW
m3/h
4/2,5
57800
n°
4
m3/h
n°
Pa
26500
1
200
mm
50
G4
76
dB(A)
ver. (L)
600
198
159
66,7
2,97
195
59,9
3,25
Scroll tandem
4/2
4/2
4
4
Axial
4/2,5
4/2,5
4/2
55400
51800
63200
4/2
4
4/2
4
4/2
59800
4
4
4
4
29500
31500
35000
38500
1
1
1
1
200
200
200
200
50
G4
77
V/ph/Hz
50
G4
78
50
G4
81
A
50
G4
82
C
B
400V/3/50Hz
RTE
Height
Width
Depth
Depth RTE
Depth RTE H
A
B
C
mm
mm
mm
kg
kg
480
2450
2350
4200
2100
2200
530
2450
2350
4200
2200
2300
600
2.450
2.350
4.200
2300
2400
700
2.450
2.350
5.500
2700
2800
800
2450
2350
5500
2800
2900
Dimensions and weights of the basic
set-up unit.
Code : SRTE480_800UY.00 /1007
Technical data
RTE
ROOF-TOP cooling only and heat pump unit
Cooling capacities from 77 up to 142 kW standard version
Heating capacities from 73 up to 142 kW standard version
R410A
• AI - Lower intake (only on SM3).
• PA4 - Rear air intake Return fan static pressure up to 300 Pa at nominal flow rate.
• MA - Upper air delivery Upper air delivery,
delivery fan static pressure up to 200 Pa at
nominal air flow rate.
• MA - Left air delivery Left air delivery,
• MD - Right air delivery Right air delivery,
• PM4 - Delivery fan static pressure up to 400
Pa Delivery fan static pressure up to 400 Pa at
nominal flow rate.
• BTR - Water heating coil 2 row hot water
coil with 3-way modulating valve. They can
be managed in post-heating mode only with
DP accessories. They can be coupled with the
G72 or G92 generator.
• BRE - Electric heating coil Electric heating
coil with two stages fitted with twin safety
thermostat, one with automatic rearm and the
other with manual rearm. The powers proposed are 12, 18, 24 and 36 kW (or indicate the
power requested in the order phase).
They can be managed in post-heating mode
only with DP accessories. The BRE cannot be
coupled with the G72 or G92 generator.
• PUC - Humidification control set-up. ON/
OFF contact (normally open) for humidification consent. In this case, the unit is complete
with humidity probe positioned in the envi-
ronment air return. A humidity probe is also
supplied to be positioned downstream from
the humidification section.
• DP - Kit for management of dehumidification and post-heating The control will force
compressor functioning in order to dehumidify
the air to the set humidity set. If the water or
electric coil is present, post-heating can also
be managed. It can be coupled with the PUC
accessory (humidification contact).
• SCS - Damper servocontrols for 2-damper
set-up Modulating servocontrols mounted
directly on the return and external dampers for
the management of fresh air.
• SCSM - Damper servocontrols with spring
return for 2-damper set-up Servocontrols with
spring return mounted directly on the return
and external dampers for the management of
fresh air. In the event of blackout they close
the external air damper completely and completely open the fresh air damper.
• SCM3 - Damper servocontrols with spring
return for 3-damper set-up. Servocontrols with
spring return mounted directly on the dampers
for management of freecooling as a replacement for the standard ones. In the event of
blackout they close the external air dampers
completely and completely open the fresh air
damper.
• FCH - Enthalpy Free-cooling Only with
3-damper mixing chamber. Manages the flow
of external and return air, making reference to
their enthalpy values.
• PR2 - Remote panel Allows to perform
rooftop control operations from a distance.
•SSV - RS485 serial interface for supervision
Serial board necessary for the interface with
supervision systems.
• SQA - Air quality probe. It analyses the
quality of the air on the basis of a SnO2 sensor
with VOC mixed gas, evaluating contamination by polluting gases. The presence of the
probe coupled to the rooftop allows:
- to set a sensitivity threshold depending on
the envisioned maximum contamination of
the air.
- the ventilation of the rooms only when necessary, thus guaranteeing energy saving.
• TV2 - Power supply voltage 3/230V/50Hz.
• TV3 - Power supply voltage 3/460V/60Hz.
• VTR (3 - 5 - 7) - Anti-vibration mounts Rubber anti-vibration mounts.
• PF - Filters dirtying pressure switch
• BSP - Special coils Condensing coils with
copper pipes and pre-painted aluminium
louvers.
• BSR - Special coils Condensing coils with
copper pipes and copper louvers.
• BSS - Special coils Condensing coils with
copper pipes and tinned copper louvers.
NOTE: for further information refer to the
technical manual.
Accessories coupling
Version
Features
The rooftop units in the RTE range represent the
ideal solution for air conditioning environments
with average cubage for tertiary, commercial
and industrial destination.
The units offer noteworthy advantages in terms
of air quality and environmental comfort, easy
installation and low noise level.
The use of ecological R410A fluid refrigerant
allows to increase the unit efficiency.
The availability of many accessories, e.g. the
cross flow recovery systems or the hot air generator with condensation, also confer a
noteworthy versatility, making the RTE range
perfectly suitable for the various system requirements.
Structure:
Self-supporting with external aluminium alloy
and internal galvanised steel sandwich-type
panelling with thickness of 50 mm and injected
polyurethane insulation (density 42 kg/m3) for
the air handling section.
Air handling section fan:
Double intake centrifugal type with blades
facing forwards for greater silence, coupled
using belts and pulleys with variable pitch.
The direction of delivery air flow can be:
UPWARDS, SIDEWAYS AND DOWNWARDS.
complete with electric control board, probes
and actuators for all components.
Versions:
RTPA F cooling only version.
RTPA H heat pump.
High temperature functioning (A)
Condensation section fans:
Silenced functioning (L)
Statically and dynamically balanced helical SET-UPS:
type, protected electrically by magnet circuit
breakers and mechanically by grids.
SMP mixing chamber 2 dampers with rear intake.
Cooling circuit:
SM2 mixing chamber 2 dampers with lateral/
Fitted with scroll compressors that guarantee lower intake.
low noise and high efficiency, complete with SM3 mixing chamber 3 dampers with free-cooresistances on the guard, internal and external ling.
coil with copper pipes and high efficiency alu- FT7 F7 (EN 779) efficiency rigid pocket filters.
minium louvers.
REC cross flow heat recovery units with intake
fan.
Air filtering:
Gxxx condensation hot air generator (72 kW, 92
Pleated synthetic filters with G4 efficiency or F7 kW or 150 kW).
rigid pocket filters (optional).
Microprocessor adjustment
Accessories
•DCPR - Pressure control device Extends the
functioning range of the rooftop in the summer
cycle (minimum temperature of the external
air up to 10 °C) and in the winter cycle in heat
pump mode (maximum temperature of the
external air up to 25 °C). Moreover, it makes
functioning silent with partial loads. A regulation circuit board varies the number of the
motor condensing fan revs on the basis of the
condensation pressure, read by the relevant
276
transducers, thus guaranteeing correct power
supply of the thermostatic valve.
• TP - Pressure transducers (as per standard
on heat pumps) They show the high and low
pressures on the display, they manage activity
of the compressors and the valves during
defrosting and inhibit their functioning when
the pressures exceed the limits set.
• RUB - Cocks on the liquid and pressing line
(cooling only version) Hermetic cocks with
manual closure positioned on the compressor
delivery and on the circuit liquid side
• GP - Protection grids Protect the external
coils from blows and hail.
• T1 - Right lateral air intake (only on SM2).
• T2 - Left lateral air intake (only on SM2).
• T3 - Rear air intake (only on SM2).
• T4 - Lower air intake (only on SM2).
Size 240 - 260 - 300 -350 - 400
cooling only (F)
Heat pump (H)
L (no 350 and A (no 350 and
L (no 350 and A (no 350 and
Functioning
std
std
400)
400)
400)
400)
DCPR
as per standard
as per standard
✔
✔
✔
✔
TP
as per standard as per standard as per standard
✔
✔
✔
RUB
✔
✔
✔
GP
✔
✔
✔
✔
✔
✔
T1 (1)
✔
✔
✔
✔
✔
✔
T2 (1)
✔
✔
✔
✔
✔
✔
T3
✔
✔
✔
✔
✔
✔
T4
✔
✔
✔
✔
✔
✔
T5 (1)
✔
✔
✔
✔
✔
✔
T6 (1)
✔
✔
✔
✔
✔
✔
AI
✔
✔
✔
✔
✔
✔
PA4
✔
✔
✔
✔
✔
✔
MA
✔
✔
✔
✔
✔
✔
MS (1)
✔
✔
✔
✔
✔
✔
MD (1)
✔
✔
✔
✔
✔
✔
PM4
✔
✔
✔
✔
✔
✔
BTR
✔
✔
✔
✔
✔
✔
BRE
✔
✔
✔
✔
✔
✔
PUC
✔
✔
✔
✔
✔
✔
DP
✔
✔
✔
✔
✔
✔
SCS
✔
✔
✔
✔
✔
✔
SCSM
✔
✔
✔
✔
✔
✔
SCM3
✔
✔
✔
✔
✔
✔
FCH
✔
✔
✔
✔
✔
✔
PR2
✔
✔
✔
✔
✔
✔
SSV
✔
✔
✔
✔
✔
✔
SQA
✔
✔
✔
✔
✔
✔
TV2
✔
✔
✔
✔
✔
✔
TV3
✔
✔
✔
✔
✔
✔
VTR3 (basic set-up)
✔
✔
✔
✔
✔
✔
VTR5 (for units from 5 to 7.1 m)
✔
✔
✔
✔
✔
✔
VTR7 (for units over 7.1 m)
✔
✔
✔
✔
✔
✔
PF
✔
✔
✔
✔
✔
✔
BSP
✔
✔
✔
✔
✔
✔
BSR
✔
✔
✔
✔
✔
✔
BSS
✔
✔
✔
✔
✔
✔
(1) Right or left direction refers to the direction of air flow inside the handling sections.
277
Technical data
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
RTE H
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
HEATING CAPACITY
HEATING capacity
Heating input power
C.O.P.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
240
standard
260
300
240
ver. (A)
260
350
400
300
kW
kW
kW
77
50,1
20,7
3,72
89
61,2
25,3
3,5
103
67
31,8
3,23
129
77,7
39,7
3,26
143
92,6
44,5
3,2
78
50,7
20,3
3,84
90
62,1
24,8
3,62
n°/n°
%
2/2
2/2
2/2
2/2
2/2
Scroll
2/2
0-50-100
4x0,53
29000
4x0,53
28000
4x0,56
40000
Axial
4x0,56
36000
4x0,53
14500
4
4
4
4
m3/h
n°
Pa
12000
1
200
17000
1
200
20000
1
200
mm
50
G4
50
G4
50
G4
n° x kW 4x0,53
m3/h
32000
n°
dB(A)
72
73
74
240
300
106
68,7
30,7
3,44
69
44,7
24,8
2,77
84,5
58,3
27,3
3,09
102,6
66,7
32,1
3,2
2/2
2/2
2/2
2/2
2/2
4x0,53
14000
4x0,53
16500
4x0,53
9500
4x0,53
9000
4x0,53
11000
4
4
4
12000
1
200
17000
1
200
20000
1
200
50
G4
50
G4
50
G4
A
4
4
4
4
22000 23000 12000 17000 20000
1
1
1
1
1
200
200
200
200
200
50
G4
77
50
G4
50
G4
78
V/ph/Hz
ver. (L)
260
50
G4
72
50
G4
73
74
69
70
71
400V/3N/50Hz
240
76
50
20,4
3,74
standard
260
300
88
105
61
66
25
30,8
3,51
3,4
350
128
77
38,5
3,33
400
141
92
43,1
3,27
240
77
50
20
3,86
ver. (A)
260
89
61
24,4
3,64
300
105
68
30,4
3,44
240
68
44,2
24,4
2,78
ver. (L)
260
83,6
55,6
26,8
3,12
300
101,6
65,9
31,6
3,21
73,4
18,9
3,88
86,3
21,8
3,96
103
26,1
3,94
127,6
34,4
3,71
142,2
38,6
3,68
77,1
19,2
4,01
87,4
22,1
3,95
101,5
26,9
3,77
74,5
19
3,92
83,6
21,8
3,83
98,5
26,5
3,71
2/2
2/2
2/2
2/2
2/2
2/2
2/2
2/2
4x0,53
36000
4x0,53
33000
4x0,53
32000
4x0,56
40000
4x0,53
16500
4x0,53
9500
4x0,53
9000
4x0,53
11000
4
4
4
4
4
4
4
m3/h
n°
Pa
12000
1
200
17000
1
200
20000
1
200
12000
1
200
17000
1
200
20000
1
200
mm
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
Sound pressure
dB(A)
72
73
74
77
78
72
73
74
69
70
71
Type
V/ph/Hz
kW
kW
kW
kW
kW
n°/n°
%
n° x kW
m3/h
n°
Scroll
2/2
2/2
0-50-100
Axial
4x0,56 4x0,53 4x0,53
34200 14500 14000
2/2
4
4
4
4
22000 23000 12000 17000 20000
1
1
1
1
1
200
200
200
200
200
C
B
RTE
Height
Width
Depth
Weight RTE
Weight RTE H
A
B
C
mm
mm
mm
kg
kg
240
1.830
2.166
3.290
1300
1320
260
1.830
2.166
3.290
1390
1410
300
1.830
2.166
3.290
1480
1500
350
1.830
2.166
3.286
1.565
1.645
400
1.830
2.166
3.286
1.645
1.725
Dimensions and weights of the basic set-up unit.
Code : SRTE240_400UY.00 /1007
RTE F
400V/3N/50Hz
* Environment air 20°C d.b., water 80/70°C
Cooling:
278
Heating:
279
RTE
ROOF-TOP cooling only and heat pump unit
Cooling capacities from 150 up to 254 kW standard version
Heating capacities from 151 up to 266 kW standard version
•
•
•
•
•
Features
The rooftop units in the RTE range represent the
ideal solution for air conditioning environments
with average and large cubage for tertiary, commercial and industrial destination.
The units offer noteworthy advantages in terms
of air quality and environmental comfort, easy
installation and low noise level.
The use of ecological R410A fluid refrigerant
allows to increase the unit efficiency.
The availability of many accessories, e.g. the
cross flow recovery systems or the hot air generator with condensation, also confer a
noteworthy versatility, making the RTE range
perfectly suitable for the various system requirements.
and pulleys with variable pitch.
The direction of delivery air flow can be: Versions:
UPWARDS, SIDEWAYS AND DOWNWARDS.
RTPA F cooling only version.
RTPA H heat pump.
Condensation section fans:
High temperature functioning (A)
Statically and dynamically balanced helical Silenced functioning (L)
type, protected electrically by magnet circuit SET-UPS:
breakers and mechanically by grids.
SMP mixing chamber 2 dampers with rear intaDouble cooling circuit:
ke.
which at the same time guarantees the respect SM2 mixing chamber 2 dampers with lateral/
for the environment and the increase of energy lower intake.
efficiency. The cooling circuit lines and the elec- SM3 mixing chamber 3 dampers with free-cootric plant wiring are inserted into the base of the ling.
machine with the purpose of making mainte- FT7 F7 (EN 779) efficiency rigid pocket filters.
nance and internal cleaning easier.
REC cross flow heat recovery units with intake
Structure:
Scroll tandem compressors that guarantee low fan.
Self-supporting with external aluminium alloy noise and high efficiency.
Gxxx condensation hot air generator.
and internal galvanised steel sandwich-type Internal and external coil with copper pipes and
panelling with thickness of 50 mm and injected high efficiency aluminium louvers.
polyurethane insulation (density 42 kg/m3) for
the air handling section.
Air filtering:
Pleated synthetic filters with G4 efficiency or F7
Air handling section fan:
rigid pocket filters (optional).
Double intake centrifugal type with blades Microprocessor adjustment
facing.
complete with electric control board, probes
forwards for greater silence, coupled using belts and actuators for all components.
Accessories
• DCPR - Pressure control device (as per standard for
silenced functioning mode) Extends the functioning
range of the rooftop in the summer cycle (minimum
temperature of the external air up to 10 °C) and in
the winter cycle in heat pump mode (maximum
temperature of the external air up to 25 °C).
Moreover, it makes functioning silent with partial
loads. A regulation circuit board varies the number
of the motor condensing fan revs on the basis of the
condensation pressure, read by the relevant transducers, thus guaranteeing correct power supply of the
280
thermostatic valve.
• GP - Protection grids Protect the external coils from
blows and hail.
• T4 - Lower recirculation air intake. rear fresh air
intake (only on SM2).
• T5 - Right lateral recirculation air intake. left fresh
air intake (only on SM2).
• T6 - Left lateral recirculation air intake. right fresh
air intake (only on SM2).
• AI - Lower intake (only on SM3).
• PA4 - Rear air intake Return fan static pressure up to
300 Pa at nominal flow rate.
• MA - Upper air delivery.
• MS - Left air delivery nominal air flow rate.
• MD - Right air delivery.
• PM4 - Delivery fan static pressure up to 400.
Pa Static pressure of the delivery fan up to 400 Pa at
nominal flow rate.
• BTR - Water heating coil 2 row hot water coil with
anti-freeze probe as per standard. They can be
managed in post-heating mode only with DP accessories. They can be coupled with the Gxxx generator.
V3V - 3-way valve with servocontrol modulating for
the management of the water coil mounted inside
the rooftop
BRE - Electric heating coil Electric heating coil with
two stages fitted with twin safety thermostat, one
with automatic rearm and the other with manual
rearm.
They can be managed in post-heating mode only
with DP accessories. The BRE cannot be coupled
with the Gxxx generator.
PUC - Humidification control set-up. ON/OFF contact (normally open) for humidification consent. In
this case, the unit is complete with humidity probe
positioned in the environment air return. A humidity
probe is also supplied to be positioned downstream
from the humidification section.
DP - Kit for management of dehumidification and
post-heating The control will force compressor functioning in order to dehumidify the air to the set
humidity set. If the water or electric coil is present,
post-heating can also be managed. It can be coupled with the PUC accessory (humidification contact).
SCSR - Recirculation damper for SMP mixing chamber.
Accessories coupling
Version
Functioning
DCPR
TP
GP
T1
T2
T4
T5
T6
AI
PA4
MA
PM4
BTR
V3V
BRE (1)
PUC
DP
SCSR
SRP
SCMP
SCS2
SR2
SCM2
SCM3
FCH
PR2
SSV
SQA
CAF
CF (only with Gxxx)
PF
RUB
VT
std
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
• SRP - Recirculation damper for the SMP mixing
chamber and modulating servocontrol (joined dampers).
• SCMP - Recirculation damper for the SMP mixing
chamber and modulating servocontrol with spring
return.
• SCS2 - Recirculation damper for SM2 mixing chamber.
• SR2 - Recirculation damper for the SM2 mixing
chamber and modulating servocontrol.
• SCM2 - Recirculation damper for the SM2 mixing
chamber and modulating servocontrol on return and
modulating servocontrol with spring return on fresh
air.
•SCM3 - Modulating servocontrols with spring control for SM3 or REC set-ups.
• FCH - Enthalpy Free-cooling Only with 3-damper
mixing chamber. Manages the flow of external and
return air, making reference to their enthalpy values.
• PR2 - Remote panel Allows to perform rooftop control operations from a distance.
• SSV - RS485 serial interface for supervision Serial
board necessary for the interface with supervision
systems.
• SQA - Air quality probe. It analyses the quality of
the air on the basis of a SnO2 sensor with VOC
mixed gas, evaluating contamination by polluting
gases. The presence of the probe coupled to the
rooftop allows:
- to set a sensitivity threshold depending on the envisioned maximum contamination of the air.
- the ventilation of the rooms only when necessary,
thus guaranteeing energy saving.
• CAF - For protection of the external air inlets in the
mixing chambers with 2 dampers or recovery unit.
As per standard with SM3.
• CF - Stainless steel flue, double isolated wall with
inspection cap and measuring sump with flue gas
temperature thermometer.
• PF - Filters dirtying pressure switch.
• RUB - Cocks on the liquid and pressing line (cooling only version).
NOTE: for further information refer to the technical
manual.
Size 480-530-600-700-800
cooling only (F)
Heat pumps (H)
L
A (no 700 - 800)
std
L
standard
standard
✔
✔
standard
standard
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
A (no 700 - 800)
✔
standard
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
(1) Not available with Gxxx set-ups.
281
Technical data
RTE F
RTE F
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
RTE H
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
HEATING CAPACITY
HEATING capacity
Heating input power
C.O.P.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
480
150
121,1
56,1
2,68
530
179
146
63
2,82
standard
600
198
158
67
2,94
4/2
4/2
4/2
4/2,5
74600
4/2,5
72400
4/2,5
69200
3
4
4
m3/h
n°
Pa
26500
1
200
29500
1
200
31500
1
200
mm
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
50
G4
79
80
81
84
85
79
80
81
kW
kW
kW
n°/n°
n° x kW
m3/h
n°
dB(A)
kW
kW
kW
kW
kW
n°/n°
n° x kW
m3/h
n°
800
254,8
199,9
92
2,77
Scroll tandem
4/2
Axial
4/2
4/2
84400
80600
4/2
4
4
35000
38500
1
1
200
200
V/ph/Hz
480
156
123,6
53,7
2,91
600
208,5
160,8
63,3
3,29
4/2
4/2
4/2
4/2,5
72400
4/2,5
69200
4/2,5
67400
3
4
4
26500
1
200
29500
1
200
31500
1
200
480
147
120
58
3
530
176
145
62
3
standard
600
194,6
156,9
69,1
2,82
151,3
48,1
3,15
178,5
52,5
3,4
202,9
60,4
3,36
4/2
4/2
4/2
4/2,5
74600
4/2,5
72400
4/2,5
69200
3
4
4
700
230,4
182,7
81
2,84
800
254
200
93,1
2,73
231,5
75,6
3,06
266,1
87,1
3,06
Scroll tandem
4/2
4/2
Axial
4/2
4/2
84400
80600
4
4
35000
38500
1
1
200
200
m3/h
n°
Pa
26500
1
200
29500
1
200
31500
1
200
mm
50
G4
50
G4
50
G4
50
G4
dB(A)
79
80
81
84
V/ph/Hz
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
400V/3/50Hz
Cooling:
282
700
232,1
183,4
79,8
2,91
ver. (A)
530
182,7
148,9
59,2
3,08
480
152,9
122,3
54,3
2,82
ver. (A)
530
181,2
146,5
60,6
2,99
600
205,2
156,8
63,3
3,24
159,1
48,7
3,27
183,8
52,8
3,48
208,3
61,5
3,39
4/2
4/2
4/2
4/2,5
72400
4/2,5
69200
4/2,5
67400
3
4
4
26500
1
200
29500
1
200
31500
1
200
50
G4
50
G4
50
G4
50
G4
85
79
80
81
400V/3/50Hz
Heating:
480
530
ver. (L)
600
700
800
kW
kW
kW
148
124
57
2,59
178,6
146,2
61,1
2,92
201,1
159,7
65,5
3,07
231
182,5
80,6
2,86
251
199,9
95,2
2,63
n°/n°
n°
4/2
4
n° x kW
m3/h
4/2,5
57800
n°
3
Scroll tandem
4/2
4/2
4
4
Axial
4/2,5
4/2,5
4/2
55400
51800
63200
4/2
4
4/2
59800
4
4
4
4
29500
31500
35000
38500
1
1
1
1
200
200
200
200
m3/h
n°
Pa
26500
1
200
mm
50
G4
50
G4
50
G4
50
G4
50
G4
dB(A)
76
77
78
81
82
700
229
182
82,2
2,78
800
250,4
198
96,2
2,6
227,7
75
3,03
250,1
85,1
2,94
V/ph/Hz
RTE H
COOLING CAPACITY
Cooling capacity
Cooling input power
E.E.R.
HEATING CAPACITY
Heating capacity
Heating input power
C.O.P.
Compressors
Type
Number/circuits
External fans
Air flow rate
HANDLING SECTION
Evaporator
Number of rows
internal fan
Number
Air filters
Thickness
Efficiency
Sound pressure
Type
4/2
4
400V/3/50Hz
kW
kW
kW
kW
kW
n°/n°
n°
480
145,2
118,9
59,1
2,45
530
176,3
145,1
62
2,84
150,1
47,9
3,13
179,6
52,6
3,41
4/2
4
n° x kW
m3/h
4/2,5
57800
n°
4
m3/h
n°
Pa
26500
1
200
mm
50
G4
76
dB(A)
ver. (L)
600
198
159
66,7
2,97
195
59,9
3,25
Scroll tandem
4/2
4/2
4
4
Axial
4/2,5
4/2,5
4/2
55400
51800
63200
4/2
4
4/2
4
4/2
59800
4
4
4
4
29500
31500
35000
38500
1
1
1
1
200
200
200
200
50
G4
77
V/ph/Hz
50
G4
78
50
G4
81
A
50
G4
82
C
B
400V/3/50Hz
RTE
Height
Width
Depth
Depth RTE
Depth RTE H
A
B
C
mm
mm
mm
kg
kg
480
2450
2350
4200
2100
2200
530
2450
2350
4200
2200
2300
600
2.450
2.350
4.200
2300
2400
700
2.450
2.350
5.500
2700
2800
800
2450
2350
5500
2800
2900
Dimensions and weights of the basic
set-up unit.
Code : SRTE480_800UY.00 /1007
Technical data
Technical data
MEC-W
Mod. MEC
Cooling capacity
Input power
Water flow rate at 30 °C
Pressure drops
Water consumption at 16 °C*
Pressure drops*
Heating capacity (accessory BAS)
Pressure drops (accessory BAS)
Coil rows
e Sound pressure
Motor power
Water-cooled packaged air conditioners
R407C
307 W
11
3,05
2350
38
620
3,5
25,28
3,47
4
2040
63
0,375
840
1120
79
104
130
1600
2400
12,2
6
98
48
kW
kW
l/h
kPa
l/h
kPa
kW
kPa
n.
m3/h
dB (A)
kW
g/m (min.)
g/m (max.)
mm (min.)
mm (max.)
mm
m3/h (min.)
m3/h (max.)
A (230 V)
A (400 V)
A (230 V)
Speed
Motor pulley diameter
Fan pulley diameter
Air flow rate
Input current
Peak current
507 W
18
4,45
3740
65
990
6,7
46,61
4,01
4
3400
65,5
0,75
840
1120
79
104
130
2750
4100
15,4
8,9
142
68
757 W
29
7,3
5900
56
1550
5
58,01
3,97
4
5100
72,5
1,125
840
1120
79
104
130
4100
6000
24,2
13,9
168
101
1007 W
35
8,5
7270
65
1910
5,3
78,59
4,59
4
6800
69,5
1,5
620
810
79
104
180
5500
8200
30,8
17,8
157
77
1507 W
55
13,7
11270
53
2970
5
113,68
5,77
4
10200
73,5
1,125
840
1120
79
104
130
8200
12000
46,6
26,9
190
115
Power supply: 3~ 230V 50Hz; 3N~ 400V 50Hz.
*
Cooling
room air temperature 27 °C D.B., 19 °C W.B.;
condensing temperature 40 °C;
condensing temperature 35 °C.
-
Heating
water inlet temperature 85 °C;
air intake temperature 15 °C;
 Sound pressure measured in an 85
m3 semi-reverberant test chamber
with reverberation time Tr = 0.5s..
Dimensions (mm)
Features
polyester paint
• Double suction radial fans
• Electric motors with belt transmission
• Four row evaporator coil with copper tubes • Plate-type condenser
and aluminium fins
• Water flow control valve driven directly in
• Washable air filter
relation to condensing pressure
• Room thermostat with one or two contacts
depending on the model
• Hermetic compressors
Accessories
• BAS: Hot water coil with three rows of alumi- • PL: Air distribution plenum comprising delinium finned copper tubes.
very grille with two rows of adjustable slats
and internal lining of sound insulating material.
284
307 W
✔
507 W
757 W
1007 W
1507 W
✔
✔
✔
✔
Mod.
Height
Width
Depth
Weight
A
B
C
kg
307 W
1290
900
494
147
507 W
1410
1040
558
184
757 W
1680
1220
648
273
1007 W
1700
1450
723
335
1507 W
1745
1880
753
484
Cod.: SMECUY.03 / 0301
Mod.
BAS 30
BAS 50
BAS 75
BAS 100
BAS 150
BAS 200
BAS 300
PL 22
PL 23
PL 26
PL 37
PL 38
PL 39
PL 300
✔
✔
✔
✔
✔
✔
285
Connection Schematic Example
SAP
primary-secondary circuituble ring
primary circuit
Buffer tank with capacity from 75 to 3500 litres
chiller
system
system
chiller
Technical Data
Features
al.
• Buffer tank with pump fully assembled to be • Pump motors protected by circuit breakers
used together with water chillers. Hydraulic • SAP 0075 and 0150 can be supplied with 5 • SAP 1500, 2500 and 3500 can be supplied
with 10 models of pumps with water flow
connections to be site installed
different pump models with water flow rates
rates up to 200,000 l/h and pressures up to
• Units dimensionally compatible with Aermec
up to 18,000 l/h and pressures up to 140 kPa
300 kPa (pump set configurations with standNBW, NRA, R, RV water chillers, but also
(maximum 2 pumps can be installed internalby pump are possible). For correct sizing of
compatible with any chiller
ly)
the unit consult the technical manual.
• Steel enclosure with epoxy powder coating • SAP 0300, 0500, 0501, 0750 and 1000 can
for the maximum resistance to weathering
be supplied with 8 models of pumps with
• Electric centrifugal pumps with stainless steel
water flow rates up to 60,000 l/h and presimpeller
sures up to 200 kPa (pump set configurations
• Overpressure relief valve
with standby pump are possible). For correct
• Fully insulated water circuit
sizing of the unit consult the technical manu-
Mod. SAP
Capacity
Relief valve setting
Water connections
Connection diameter
l
l
bar
(1)
Mod. SAP
Capacity
Relief valve setting
Water connections
Connection diameter
l
l
bar
(1)
Model Pump
1500 flange (*) Ø
2500 flange (*) Ø
3500 flange (*) Ø
Ø
Ø
R
125
125
125
T
125
125
125
0075
75
8
6
F
1” 1/4
0150
150
12
6
F
1” 1/2
0300
300
18
6
F
2”
0500
500
24
6
F
2” 1/2
0501
500
24
6
F
2” 1/2
0750
750
18 x 2
6
F
3”
1000
1000
18 x 2
6
F
3”
1500
1500
24 x 2
6
2500
2500
24 x 3
6
3500
3500
24 x 3
6
U
150
150
150
V
150
150
150
X
150
150
150
Y
150
150
150
W
200
200
200
K
200
200
200
J
200
200
200
I
200
200
200
Power supply = 3N~ 400V 50Hz.
(1) F = Female connection (Gas)
(*) PN16UNI2278
Accessories
• AVX: Spring anti-vibration mounts. Select the
thermostats to prevent freezing during winter.
AVX model from the compatibility table
included in the technical manual.
• VT: Anti-vibration mounts, set of four anti• RX - RXV: Electric immersion heater (RX: 500
vibration mounts to be installed under the
W - RXV: 3 kW), installed and controlled by
unit’s base.
SAP
0075
0150
0300
0500 - 0501
0750
1000
1500
2500
3500
286
RX
RXV
VT 2
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
VT 8
✔
✔
287
Technical Data
Dimensions (mm)
Pump motor power input
Pump
Max. input power
Max. input current
W
A
Pump
Max. input power
Max. input current
W
A
Pump combinations
SAP 0075
SAP 0150
AC
AC
EC
A
275
0,5
B
330
0,69
AE
AE
EE
AF
AF
EF
SAP 0300
SAP 0500
SAP 0501
SAP 0750
SAP 1000
SAP 1500
SAP 2500
SAP 3500
IS
IS
IS
IZ
UZ
IZ
UZ
IZ
UZ
C
614
1,1
E
895
1,6
F
1070
1,9
G
1550
2,8
H
2050
3,6
I
22000
43
J
17500
36,4
K
14500
30
L
3100
5,6
M
4100
7,2
N
1470
2,6
P
2600
4,4
Q
5200
8,8
R
4000
8,5
T
5200
11,5
U
5800
15,5
V
8000
15,5
W
11500
22,5
X
9000
22,5
Y
11000
22,5
ZE
CE
ZE
FS
PS
PS
LS
QS
QS
TS
YS
TS
YS
TS
YS
ZF
CF
ZF
FZ
PZ
PZ
LZ
QZ
QZ
TZ
YZ
TZ
YZ
TZ
YZ
AZ
AZ
EZ
BC
BC
FC
FS
FS
FS
FZ
FZ
FZ
MZ
LZ
JZ
VZ
JZ
VZ
JZ
VZ
LS
JS
VS
JS
VS
JS
VS
BE
BE
FE
CS
GS
GS
GS
NS
MS
KS
WS
KS
WS
KS
WS
BF
BF
FF
CZ
GZ
GZ
GZ
NZ
MZ
KZ
WZ
KZ
WZ
KZ
WZ
BZ
BZ
FZ
ES
HS
HS
HS
PS
NS
RS
XS
RS
XS
RS
XS
ZC
CC
ZC
EZ
HZ
HZ
HZ
PZ
NZ
RZ
XZ
RZ
XZ
RZ
XZ
ZZ
CZ
ZZ
ZZ
ZZ
ZZ
MS
ZZ
ZZ
US
ZZ
US
ZZ
US
ZZ
SAP 0075 - 0150
SAP 0300 - 0500
SAP 0501 - 0750
SAP 1000 - 1500 - 2500 - 3500
1st letter: primary circuit.
2nd letter: secondary circuit.
A, B = multi-speed water pumps.
L, M, Q = twin pump set.
S = pump and standby pump set.
Z = without pump.
The combinations shown in the table are the only possible ones.
A large number of different flow rate/pressure combinations are available. Refer to the technical manual.
A
B
C
kg
0075
1000
1000
700
120
0150
1000
1000
700
120
0300
1650
1100
1100
190
0500
1650
1100
1100
230
0501
1968
1550
1000
310
0750
1968
1550
1000
400
1000
2049
2200
1000
445
1500
2049
2200
1750
560
2500
2049
2200
2000
710
3500
2049
2200
2300
790
Cod.: SSAPUY.05 / 0702
SAP
Height
Width
Depth
Net weight (ZZ version)
288
289
Technical data
TRA
Cooling towers with capacities from 49.53 up to 1084.88 kW
Mod. TRA
Capacity
Air flow rate
Water flow rate
Pressure drops
Motor power
Motor poles
Motor poles (double polarity)
Fans
Nozzles
e Sound pressure
kW
m3/h
l/h
kPa
kW
n.
n.
n.
n.
dB (A)
Mod. TRA
Capacity
Air flow rate
Water flow rate
Pressure drops
Motor power
Motor poles
Motor poles (double polarity)
Fans
Nozzles
e Sound pressure
e Sound pressure (silenced version)
kW
m3/h
l/h
kPa
kW
n.
n.
n.
n.
dB (A)
dB (A)
50
49,53
4500
7100
42
0,55
4
4/8
1
1
52
70
69,06
4500
9900
32
0,75
4
4/8
1
1
52
400
405,35
28350
58100
28
2,2
6
6/8
1
4
57
500
488,37
28350
70000
40
4
6
6/12
1
4
57
90
88,60
8100
12700
52
0,75
4
4/8
1
1
54
110
107,44
8100
15400
32
0,75
4
4/8
1
1
54
550
574,19
36000
82300
55
5,5
6
6/12
1
4
58
130
125,58
8100
18000
42
1,1
6
6/12
1
1
54
600
604,88
45350
86700
30
4
6
6/12
1
9
61
170
168,14
12600
24100
28
1,1
6
6/12
1
1
54
750
767,44
45350
110000
48
5,5
6
8/16
1
9
61
200
197,67
12600
28330
35
1,5
6
6/8
1
1
54
850
856,74
58000
122800
49
5,5
8
8/16
1
16
62
56
240
242,09
18100
34700
23
1,5
6
6/8
1
4
55
950
941,86
58000
135000
25
5,5
8
8/16
1
16
62
56
300
302,33
18100
43300
40
2,2
6
6/8
1
4
55
1100
1084,88
67000
155500
32
7,5
8
8/16
1
16
64
57
* = Sizes from 50 to 750 are only muted.
Power supply = 3~ 230V 50Hz; 3N~ 400V 50Hz.
e Sound pressure measured in free field conditions at distance of 10 m
with direction factor = 2.
- air inlet temperature 23.5 °C W.B.;
- water outlet temperature 29 °C
Features
Dimensions (mm)
- TRA from 50 up to 750 with only silenced and
Inspection window standard
- TRA from 850 up to 1100 standard and silenced with inspection door to a crawl Series
• Entirely built of fibre-glass reinforced resin to
avoid corrosion problems with surface treatment to withstand ultraviolet rays, heat
changes and scuffing caused by bad weather
• Limited to the three largest sizes (TRA 850,
950 and 1100) the bearing structure is made
of hot galvanised steel with 22mm thick fibreglass reinforced resin sandwich panels, with
support foam material inside. In this way, as
well achieving good mechanical strength the
sound of the water flowing is muffled. Surface • Water drip pan, waterproof and water resitreatment to withstand ultraviolet rays, heat
stant made of fibreglass reinforced polyester
changes and scuffing caused by bad weather.
resin with multi layer glass material
• Self-bearing structure
• Personal protection grill made of AISI 304 on
• Exchange pack and drip separator made of
the fan outlet
self-extinguishing PVC
• P V C wa t e r d i s t r i b u t i o n p i p e s w i t h
polypropylene nozzles
• Hydrometer (when there is not water flow
rate measuring device, this instrument makes
possible to have an approximate indication of
the flow rate of the water in circulation based
on the nozzle load drop)
• Plastic bleed cock
• Axial high efficiency fan with several blades
Accessories*
• RT: Heater element with regulating thermostat.
50
✔
70
✔
90
✔
110
✔
130
✔
170
✔
200
240
300
400
✔
✔
500
550
✔
✔
750
850
950
✔
✔
✔
✔
1100
✔
✔
N.B. = In the case of RT accessories, the number between brackets indicates the capacity of the heater element.
* = All the accessories and/or variants must in all cases be specified when the order is placed.
290
600
✔
Mod. TRA
Height
Width
Depth
Weight
A
B
C
kg
50
2110
800
800
75
70
2110
800
800
75
90
2595
1000
1000
85
110
2595
1000
1000
95
130
2595
1000
1000
95
170
2800
1200
1200
170
200
2800
1200
1200
170
240
2860
1400
1400
210
300
2860
1400
1400
210
400
3140
1740
1740
410
500
3140
1740
1740
410
550
3380
1900
2100
500
600
3450
2100
2300
555
750
3450
2100
2300
580
850
3685
2025
2360
850
950
3685
2025
2360
815
1100
3685
2360
2380
915
291
Cod.: STRAUY.02 / 1008
TRA
RT 11 (1 kW)
RT 12 (2 kW)
RT 13 (3 kW)
RT 15 (5 kW)
RT 17 (7.5 kW)
new
By suitably combining the numeurus options available, it’s possible to configure each model in such a way as to meet the most particular of system
requirements.
CSE - CDR - CVA - CVR
Fielf configurator:
1 2 3
4
5
6 7
8
9
10
11
||||||||
Code
|
ø
|
n° rows
|
Power supply
|
| Fans n° coilMotor Electrical
Refrigerant Fanstype
connection
Air remote condensers
CDR-CVR
CVA
Characteristics
1
WRL100E
1
WRL140E
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CSEX3014SM
CSEX3013BM
CSEX3012BM
CSEX3022SM
CSEX3022SM
CSEX5014EM
CSEX5013STY
CSEX5014STD
CSEX6013ETD
CSEX5025ETY
CSEX5013STD
CSEX6014STY
CSEX5015STD
CSEX6014STD
CSEX5023STY
CSEX6014BTY
CSEX6015BTD
CSEX6023ETD
CSEX6014BTD
CSEX6023STD
CSEX6024STY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
star
triangle
triangle
star
triangle
star
triangle
triangle
star
star
triangle
triangle
triangle
triangle
star
50
45
50
45
50
45
50
45
45
45
50
45
50
45
45
50
45
45
50
45
45
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
8
9
10
11
15
15
19
19
19
19
23
23
27
27
28
38
37
37
45
48
45
26
36
36
29
29
32
31
38
32
29
38
34
38
42
34
43
49
35
49
45
37
no
no
no
no
no
no
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1/QA1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
(request for) double coolig
circuit *
WRL080E
refrigerant pipeworks kit *
1
transducer n°
WRL070E
speed regulator n°
1
control box type n°/Type
WRL050E
Sound pressure dB(A)
1
condenser capacity kW
WRL040E
ambient temperature °C
1
condensing temperature °C
WRL030E
wiring connection
1
refrigerant
WRL025E
number of circuits of remote
condenser
CVR SERIES General characteristics
• Two exchangers arranged in a V
• Diameter of fans 800 mm
• From 2 to 5 fans
• Separate ventilation compartment for each fan
Construction characteristics
• They are designed for outdoor installation and therefore made with technologies and materials
which ensure resistance to atmospheric agents
• High-efficiency finned exchangers
• Latest generation of axial fans to ensure silent operation and high output, protection grade IP54. The
standard units are supplied with the fans wired up
to a junction box. Separate airflow for each fan.
The extremely small dimensions allow installation
in restricted spaces, high power output for area
occupied
• Available versions:
(BT) basic 6 pole
(ST) silenced 8 pole
(ET) extra silenced 12 pole
To facilitate the choice of condenser, we have provided tables below with the combinations of condeseless Aermec unit. The combinations specified
require the compulsory use of an RPM regulator and an electrical panel, to ensure correct operation under varying external conditions.
Condenser
CVA SERIES General characteristics
• Exchangers in W configuration
• Low noise
• Two rows of fans, diameter 800mm
• With 6 to 8 fans
• 4 high-efficiency finned exchangers
(BT) basic 6 pole
number of remote condensers
SERIES CDR
General characteristics
• Two exchangers arranged in a V
• Two independent cooling circuits
• Two rows of fans, diameter 800mm
• Separate ventilation compartment for each fan
• High-efficiency finned exchangers
(BT) basic 6 pole
(ET) extra silenced 12 pole
* Accessory to be provided in the order
292
motor type:
B - Standard
S - Silenced
E - Extra silenced
C - Brushless motor with electronic commutation (EC)
Power supply:
T - 400V/3/50Hz
M - 230V/1/ 50Hz
Electrical connection:
D - Triangle
Y - Star
° -Monophase
Combinations
number of circuits of
condenserless unit
CSE SERIES General characteristics
• Modularity has been prioritized in the design: each
unit is made up of standard sections, whose elements are easily dismantlable
• Starting from the CSE 563 in the ø 500 series, and
from the CSE 663 in the ø 630 series, there are
models made up of two units side by side, making
vertical installation impossible. All the other
models are designed for either horizontal or vertical installation.
• To facilitate the connection of the condensers to
the electrical system, the fan motors are wired in
the factory (excluding the 350 diameter series) and
connected to a junction box located on the manifold side and protected, together with the manifolds, by an easily removable cover.
• Coils with staggered copper pipes and corrugated
aluminium fins, mechanically expanded. The coils
are fixed at the shoulders so as to avoid breakage
of the tubes as a result of any vibration.
• Manifolds in copper with connectors for soldering,
sealed to prevent the ingress of impurities and moisture into the circuits.
• Latest generation of axial fans to ensure silent operation and high output, protection grade IP54.
They are intended for ∆/Y connection and various
polarities, and allow continuous regulation of the
speed by reducing the voltage.
(B) basic
(S) silenced
(E) extra silenced.
Size:
CSE-CVR-CVA-CDR
Gas:
X -R410A
° -Fluidi refrigeranti con PS max 28 bar
ø fans (mm):
3 - 350
5 - 500
6 - 630
8 - 800
9 - 910
n° fans:
* - da 1 a 16
N° rows:
* - da 2 a 6
Condenserless unit
CSE
Choice of unit
Sound pressure
measued in free field conditions, in cooling
mode, at distance of 10m and direction factors =
2 in accordance with the ISO 3744 standard
293
NXW800E
2
2
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
triangle
triangle
triangle
star
star
triangle
star
star
triangle
triangle
triangle
triangle
triangle
star
triangle
star
triangle
triangle
triangle
triangle
triangle
star
star
triangle
triangle
triangle
triangle
50
45
45
45
50
45
45
45
50
50
45
45
50
50
45
45
50
45
45
50
45
45
45
50
45
45
45
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
137
133
136
130
141
143
145
145
178
182
180
188
202
194
201
196
240
227
221
268
270
262
259
325
325
313
300
54
59
55
44
49
55
44
32
59
55
51
45
59
44
61
46
51
61
46
61
53
47
41
53
54
47
39
1/QA2
1/QA1
1/QA2
1/QA1
1/QA1
1/QA1
1/QA1
1/QA2
1/QA1
1/QA2
1/QA1
1/QA2
1/QA1
1/QA1
1/QA2
1/QA2
1/QA1
1/QA2
2/QA1
1/QA2
1/QA2
1/QA2
1/QA3
1/QA2
1/QA2
1/QA3
2/QA2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
294
Sound pressure
measued in free field conditions, in cooling mode, at distance of 10m and direction factors = 2 in
accordance with the ISO 3744 standard
yes
yes
yes
no
yes
yes
no
no
yes
yes
no
no
yes
no
yes
no
no
yes
no
yes
no
no
no
no
no
no
no
condenserless unit
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Condenserless unit
CSEX6034BTD
CSEX9024BTD
CSEX6044BTD
CVRX8023BTY
CSEX8023BTY
CSEX8024BTD
CVRX8024BTY
CVRX8043ETY
CSEX9024BTD
CSEX6044BTD
CVRX8024BTD
CVRX8033STD
CSEX9026BTD
CVRX8024BTY
CSEX9034BTD
CVRX8033BTY
CVRX8024BTD
CSEX9036BTD
CDRX8043STD
CSEX9034BTD
CVRX8034BTD
CVRX8043BTY
CVRX8054STY
CVRX8033BTD
CVRX8043BTD
CVRX8053STD
CDRX8083ETD
circuit *
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NXW900E
2
NXW1000E
2
NXW1250E
2
NXW1400E
2
WSA/WSB701E
1
WSA/WSB801E
1
WSA/WSB901E
1
WSA/WSB1101E
1
WSA/WSB1402E
2
WSA/WSB1602E
2
WSA/WSB1802E
2
WSA/WSB2002E
circuit *
NXW750E
2
no
no
no
no
no
no
no
no
no
no
no
no
no
no
yes
no
no
yes
no
no
yes
yes
no
yes
yes
yes
yes
no
yes
yes
NXW700E
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
transducer n°
NXW650E
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
speed regulator n°
NXW600E
1/QA1
1/QA1
1/QA2
1/QA1
1/QA1
1/QA2
1/QA1
1/QA2
1/QA2
1/QA1
1/QA2
1/QA1
1/QA1
1/QA2
1/QA1
1/QA2
1/QA1
1/QA1
1/QA2
1/QA1
1/QA1
1/QA2
1/QA1
1/QA1
1/QA2
1/QA2
1/QA1
1/QA2
1/QA2
1/QA2
2
45
46
37
45
52
39
52
48
40
52
54
41
52
54
37
54
49
43
40
49
51
39
55
51
45
36
51
57
45
40
NXW550E
54
53
56
64
61
61
81
79
82
91
91
90
99
102
100
122
115
125
118
154
162
151
191
180
188
178
216
215
200
202
2
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
45
30
30
30
30
30
30
30
30
30
30
NXW500E
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
46
50
45
45
50
45
45
45
50
45
45
45
1
star
star
triangle
triangle
triangle
star
triangle
star
star
triangle
triangle
star
triangle
triangle
star
triangle
star
triangle
triangle
star
triangle
star
triangle
triangle
triangle
triangle
triangle
triangle
triangle
star
wiring connection
WRL650E
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
refrigerant
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
2
2
1
2
2
2
2
1
2
2
condenser
WRL600E
CSEX5024BTY
CSEX6023BTY
CSEX6033ETD
CSEX6023STD
CSEX6023BTD
CSEX6033STY
CSEX6023BTD
CSEX6033BTY
CSEX6043STY
CSEX6024BTD
CSEX6033BTD
CSEX8024STY
CSEX6025BTD
CSEX6034BTD
CVRX8023STY
CSEX6033BTD
CSEX8024BTY
CVRX8023STD
CSEX8033ETD
CSEX8024BTY
CVRX8023BTD
CVRX8033STY
CSEX8024BTD
CVRX8024BTD
CVRX8033STD
CVRX8043ETD
CVRX8023BTD
CSEX8034BTD
CVRX8034STD
CVRX8043STY
Condenser
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
WRL550E
1
transducer n°
WRL500E
speed regulator n°
1
WRL400E
1
WRL300E
1
WRL200E
wiring connection
1
refrigerant
WRL180E
condenser
1
Condenser
WRL160E
condenserless unit
Combinations
Condenserless unit
Combinations
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CSEX8043BTD
CVRX8034BTD
CVRX8044BTD
CVRX8054BTY
CDRX8083STY
CSEX8044BTD
CSEX8063BTD
CVRX8053BTD
CDRX8103ETD
CVRX8043BTD
CSEX8064BTD
CVRX8054BTD
CDRX8103STY
CVRX8044BTD
CVRX8054BTD
CDRX8084STD
CDRX8104STY
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
R410A
triangle
triangle
triangle
star
star
triangle
triangle
triangle
triangle
Triangle
Triangle
Triangle
Star
triangle
triangle
triangle
star
50
50
45
45
45
50
45
45
45
50
45
45
45
50
45
45
45
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
339
361
361
348
348
382
382
406
378
434
430
451
435
481
451
469
440
58
53
54
48
43
58
60
55
40
54
60
55
44
54
55
49
44
2/QA1
1/QA2
1/QA2
1/QA3
2/QA2
2/QA1
2/QA2
1/QA3
2/QA3
1/QA2
2/QA2
1/QA3
2/QA3
1/QA2
1/QA3
2/QA2
2/QA3
2
1
1
1
2
2
2
1
2
1
2
1
2
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CVR°833BTD
CVR°853ETD
CSE°843BTD
CSE°863STY
CVR°834BTD
CVR°853STY
CSE°844BTD
CSE°864STY
CVR°834BTD
CVR°843BTD
CVR°853STD
CSE°863BTY
CVR°843BTD
CVR°844BTD
CVR°854BTY
CSE°863BTD
CVR°853BTD
CDR°864BTD
CDR°883STD
CDR°8104STD
CVR°854BTD
CDR°883BTD
CDR°8103STD
CDR°883BTD
CDR°884BTD
CDR°8104STD
CVR°843BTD
CVR°844BTD
CDR°8103BTD
CDR°884STY
CDR°883ETD
CDR°8103BTD
CDR°8104BTD
CVR°854BTY
CDR°8104BTD
CVR°853BTD
CVA°883STD
CVR°854BTD
CVA°864BTD
CVA°884STD
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
2
1
1
1
1
1
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
triangle
triangle
triangle
star
triangle
star
triangle
star
triangle
triangle
triangle
star
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
star
triangle
triangle
triangle
star
triangle
triangle
Triangle
triangle
triangle
Triangle
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
45
30
45
30
45
30
45
45
45
45
45
45
45
45
45
30
30
30
30
30
30
30
30
30
222
200
232
288
247
229
261
249
247
297
286
288
297
329
317
348
370
405
402
535
412
494
502
494
540
535
297
329
621
320
274
621
675
317
675
370
431
412
415
424
53
37
58
46
53
41
58
46
53
54
47
54
54
54
48
60
55
56
49
50
55
57
50
57
57
50
54
54
58
43
39
58
57
50
58
57
50
58
57
50
1/QA2
1/QA3
2/QA1
2/QA2
1/QA2
1/QA3
2/QA1
2/QA2
1/QA2
1/QA2
1/QA3
2/QA2
1/QA2
1/QA2
1/QA3
2/QA2
1/QA3
2/QA2
2/QA2
2/QA3
1/QA3
2/QA2
2/QA3
2/QA2
2/QA2
2/QA3
1/QA2
1/QA2
2/QA3
1/QA4
1/QA4
2/QA3
2/QA3
2/QA3
2/QA3
2/QA3
2/QA4
2/QA3
2/QA3
2/QA4
1
1
2
2
1
1
2
2
1
1
1
2
1
1
1
2
1
2
2
2
1
2
2
2
2
2
1
1
2
1
1
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
1
1
2
1
1
2
2
2
2
2
2
2
2
2
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
no
no
no
no
no
no
no
no
no
yes
yes
no
yes
yes
no
no
yes
no
yes
yes
yes
yes
yes
2
1+1
2
1
2
1+1
WSA/WSB2202E
2
WSA/WSB2502E
2
WSA/WSB2802E
2
1
1
2
1
2
2
2
2
2
Sound pressure
measued in free field conditions, in cooling mode, at distance of 10m and direction factors = 2 in
accordance with the ISO 3744 standard
295
HWF6412AE
2
2
WF4812°E
2
WF5612°E
2
WF6412°E
2
WF2512AE
2
WF2812AE
2
WF3212AE
2
WF3612AE
2
WF4212AE
2
WF4812AE
2
WF5612AE
2
WF6412AE
2
1
1
1
1
1
1
1
1
2
1
1
2
1
2
2
1
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
2
1
2
2
1
2
2
1
2
2
2
2
2
2
2
2
CDR°8084BTD
CVA°8123BTD
CVA°8163STY
CDR°8103BTD
CVA°8124BTD
CVA°8163STD
CVA°8123BTD
CVA°8163BTD
CDR°8103BTY
CVA°8124BTD
CVA°8164BTD
CDR°8104BTY
CVA°8163BTD
CDR°8103BTD
CVA°8123STD
CVA°8164BTD
CVA°8104BTD
CVA°8143STD
CDR°8103BTD
CVA°8123BTD
CVA°8163STD
CDR°8104BTD
CVA°8143BTD
CVA°8164STD
CDR°8103BTD
CVA°8123BTD
CVA°8163STD
CDR°8103BTD
CVA°8124BTD
CVA°8163BTY
CVA°8123BTD
CVA°8164BTD
CDR°8103BTY
CVA°8163BTD
CDR°8103BTD
CVA°8123STD
CVA°8163BTD
CDR°8104BTD
CVA°8124STD
CVA°8164BTD
CVA°8104BTD
CVA°8143BTY
CDR°8103BTD
CVA°8124BTD
CVA°8163STD
CDR°8104BTD
CVA°8143BTD
CVA°8164BTY
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
star
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
star
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
star
50
45
46
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
43.6
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
719
776
693
828
830
798
1035
1013
1036
1106
1103
1112
1351
1242
1199
1470
1437
1397
1657
1553
1596
1799
1781
1694
828
776
724
828
830
828
1035
1103
1036
1351
1242
1199
1351
1350
1270
1470
1437
1442
1657
1660
1596
1799
1781
1730
57
59
46
58
59
52
59
60
54
59
60
54
60
61
54
60
61
54
61
62
55
61
62
55
58
59
52
58
59
53
59
60
54
60
61
54
60
61
54
60
61
55
61
62
55
61
62
56
2/QA2
2/QA3
2/QA4
2/QA3
2/QA3
2/QA4
2/QA3
2/QA4
1/Q5
2/QA3
2/QA4
1/Q5
2/QA4
1/Q5
2/QA3
2/QA4
1/Q2 -1/Q3
1/Q2 -1/Q3
1/Q5
2/QA3
2/QA4
1/Q5
1/Q3-1/Q4
2/QA4
2/QA3
2/QA3
2/QA4
2/QA3
2/QA3
2/QA4
2/QA3
2/QA4
1/Q5
2/QA4
1/Q5
2/QA3
2/QA4
1/Q5
2/QA3
2/QA4
1/Q2 -1/Q3
1/Q3-1/Q4
1/Q5
2/QA3
2/QA4
1/Q5
1/Q3-1/Q4
2/QA4
2
2
2
2
2
2
2
2
1
2
2
1
2
1
2
2
2
2
1
2
2
1
2
2
2
2
2
2
2
2
2
2
1
2
1
2
2
1
2
2
2
2
1
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
no
no
no
no
no
no
no
no
yes
yes
yes
yes
no
yes
yes
no
yes
yes
yes
yes
yes
yes
yes
yes
no
no
no
no
no
no
no
no
yes
no
yes
yes
no
yes
yes
no
yes
yes
yes
yes
yes
yes
yes
yes
296
Sound pressure
circuit *
WF4212°E
2
2
transducer n°
HWF5612AE
WF3612°E
speed regulator n°
2
2
HWF4812AE
WF3212°E
2
2
HWF4212AE
2
WF2812°E
HWF3612AE
2
2
HWF3212AE
WF2512°E
wiring connection
2
no
no
no
no
no
no
no
no
yes
yes
no
no
yes
no
yes
yes
no
yes
yes
yes
yes
yes
yes
yes
yes
no
no
no
no
no
no
no
no
yes
yes
no
no
yes
no
yes
yes
no
yes
yes
yes
yes
yes
yes
yes
yes
refrigerant
HWF2812AE
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
condenser
2
2
2
2
2
2
2
2
2
2
2
2
2
1
2
1
2
2
1
2
1
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
2
1
2
2
2
2
1
2
2
1
2
2
Condenser
HWF2512AE
57
2/QA2
58
2/QA3
46
2/QA4
58
2/QA3
59
2/QA3
52
2/QA4
59
2/QA3
60
2/QA4
53 1/QA2-1/QA3
44 1/QA3-1/QA4
59
2/QA3
60
2/QA4
54
1/Q5
60
2/QA4
60
1/QA4
54
2/QA3
60
2/QA4
61
1/QA5
54 1/Q2-1/Q3
61
1/Q5
62
2/QA3
55
2/QA4
61
1/Q5
62
2/QA3
55
2/QA4
57
2/QA2
59
2/QA3
52
2/QA4
58
2/QA3
59
2/QA3
53
2/QA4
59
2/QA3
60
2/QA4
50 1/Q2-1/Q3
41 1/Q3-1/Q4
59
2/QA3
60
2/QA4
54
1/Q5
60
2/QA4
61
1/Q5
54
2/QA3
60
2/QA4
61 1/Q2-1/Q3
55 1/Q3-1/Q4
61
1/Q5
62
2/QA3
55
2/QA4
61
1/Q5
62 1/Q3-1/Q4
55
2/QA4
2
719
684
693
828
776
798
932
945
983
998
1035
1103
1036
1351
1187
1199
1351
1350
1397
1657
1553
1596
1657
1660
1694
719
776
724
828
830
823
1035
1013
983
998
1106
1103
1112
1351
1350
1270
1470
1437
1442
1657
1660
1596
1799
1781
1705
condenserless unit
HWF6412°E
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
Condenserless unit
2
50
45.2
46
50
45
45
48
44
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
43,6
50
45
45
50
45
45
45
50
45
45
50
45
45
50
45
45
50
45
45
50
45
45
circuit *
HWF5612°E
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
star
Triangle
Triangle
Triangle
Triangle
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
star
triangle
triangle
triangle
triangle
triangle
triangle
2
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
R134a
transducer n°
HWF4812°E
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
speed regulator n°
2
CDR°8084BTD
CDR°8104BTD
CVA°8163STY
CDR°8103BTD
CVA°8123BTD
CVA°8163STD
CVA°8123BTD
CVA°8163BTD
CVA°8103STD
CVA°8143ETD
CVA°8123BTD
CVA°8164BTD
CDR°8103BTY
CVA°8163BTD
CDR°8084BTD
CVA°8123STD
CVA°8163BTD
CDR°8104BTD
CVA°8143STD
CDR°8103BTD
CVA°8123BTD
CVA°8163STD
CDR°8103BTD
CVA°8124BTD
CVA°8164STD
CDR°8084BTD
CVA°8123BTD
CVA°8163STD
CDR°8103BTD
CVA°8124BTD
CVA°8163BTY
CVA°8123BTD
CVA°8163BTD
CVA°8103STD
CVA°8143ETD
CVA°8124BTD
CVA°8164BTD
CDR°8104BTY
CVA°8163BTD
CDR°8104BTD
CVA°8124STD
CVA°8164BTD
CVA°8104BTD
CVA°8143BTY
CDR°8103BTD
CVA°8124BTD
CVA°8163STD
CDR°8104BTD
CVA°8143BTD
CVA°8164STD
HWF4212°E
1
1
1
1
1
1
1
1
2
2
1
1
2
1
2
2
1
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
2
2
1
1
2
1
2
2
1
2
2
2
2
2
2
2
2
2
HWF3612°E
2
HWF3212°E
wiring connection
2
refrigerant
HWF2812°E
condenser
2
Condenser
HWF2512°E
condenserless unit
Combinations
Condenserless unit
Combinations
Sound pressure
297
298
[n°x ø mm]
2x48
2x48
2x48
2x48
2x60
2x60
2x60
2x48
2x48
2x48
2x60
2x60
2x60
[n°x ø mm]
2x35
2x35
2x35
2x35
2x42
2x42
2x42
2x35
2x35
2x35
2x42
2x42
2x42
A
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
B
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
C
4180
4180
4180
4180
5150
5150
5150
4180
4180
4180
5150
5150
5150
CSE
1X42
1X42
1X42
1X54
A
820
820
820
820
1060
1060
1060
1060
1060
1060
1060
1060
1060
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1340
1340
1340
1340
1340
1340
1340
1340
1340
1340
1340
1340
1340
1340
1340
1530
1530
1530
1530
B
560
560
560
560
773
773
773
773
773
773
773
773
773
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
973
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1374
1374
1374
1374
C
760
760
760
1310
1105
1105
1105
1105
1105
1105
2045
2045
2045
1340
1340
1340
1340
1340
1340
2500
2500
2500
2500
2500
2500
2500
3660
3660
3660
3660
3660
4820
4820
3543
3543
3543
3543
3543
3543
5208
5208
5208
3543
5208
5208
3543
5208
5208
3063
3063
4493
4493
CDRX8043STD
CDRX8064BTD
CDRX8083BTD
CDRX8083STD
CDRX8083ETD
CDRX8083STY
CDRX8084BTD
CDRX8084STD
CDRX8084STY
CDRX8103BTD
CDRX8103BTY
CDRX8103STD
CDRX8103ETD
CDRX8103STY
CDRX8104BTD
CDRX8104STD
CDRX8104STY
CDRX8104BTY
4
6
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
59000
115700
163600
117000
71700
86000
150000
107000
83000
204500
152000
145000
89700
108000
192700
140000
108000
108000
2x48
2x54
2x60
2x60
2x60
2x60
2x60
2x60
2x60
2x70
2x70
2x70
2x70
2x70
2x70
2x70
2x70
2x70
2x35
2x42
2x48
2x48
2x48
2x48
2x48
2x48
2x48
2x54
2x54
2x54
2x54
2x54
2x54
2x54
2x54
2x54
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2150
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2160
2270
3240
4210
4210
4210
4210
4210
4210
4210
5180
5180
5180
5180
5180
5180
5180
5180
5180
CVA°8103BTD
CVA°8104BTD
CVA°8123BTD
CVA°8123STD
CVA°8124BTD
CVA°8124STD
CVA°8143BTD
CVA°8143BTY
CVA°8143STD
CVA°8143ETD
CVA°8163STY
CVA°8163STD
CVA°8163BTD
CVA°8163BTY
CVA°8164BTD
CVA°8164BTY
CVA°8164STD
10
10
12
12
12
12
14
14
14
14
16
16
16
16
16
16
16
205000
19000
242000
170000
222000
162000
282000
218000
202000
122800
179300
230000
324000
145000
296000
234000
215000
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x89
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2x64
2105
2105
2105
2105
2105
2105
2105
2105
2105
2105
2105
2105
2105
2105
2105
2105
2105
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
8100
8100
8700
8700
8700
8700
8700
8700
8700
8700
11200
11200
9950
9950
11200
11200
11200
2x28
2x28
2x28
2x28
2x28
2x28
2x28
2x28
2x35
2x35
1590
1590
1590
1590
1590
1590
1590
1590
1590
1590
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
2270
2270
2270
2270
3210
3210
3210
3210
3210
3210
CVR
1090
A
CDR
B
B
A
C
CVA
A
B
C
1000
B
Cod.: SCONREUY.02 / 1111
2x42
2x42
2x42
2x42
2x42
2x42
2x42
2x42
2x48
2x48
[m3/h]
96000
53500
91000
68200
115000
86000
55100
74000
44250
68000
115000
92000
66000
Dimensions
[mm]
47500
37500
46000
36500
72000
52500
41000
57000
68500
50500
Connection
OUT
2
2
2
2
3
3
3
3
3
3
Connection
IN
CVRX8023BTD
CVRX8023BTY
CVRX8024BTD
CVRX8024BTY
CVRX8033BTD
CVRX8033STD
CVRX8033STY
CVRX8033BTY
CVRX8034BTD
CVRX8034STD
Air flow rate
Connection
OUT
1X54
1X54
1X54
1X70
CVRX8043BTD
CVRX8043STY
CVRX8044BTD
CVRX8043ETD
CVRX8053BTD
CVRX8053STD
CVRX8053ETD
CVRX8043BTY
CVRX8043ETY
CVRX8053STY
CVRX8054BTD
CVRX8054BTY
CVRX8054STY
[n°]
4
4
4
4
5
5
5
4
4
4
5
5
5
Model
Connection
IN
[n°x ø mm]
1x16
1x16
1x18
1x18
1X18
1X18
1x22
1x22
1X22
1X22
1x28
1x28
1x28
1X22
1X22
1X22
1X22
1X22
1X28
1X28
1X28
1X28
1X28
1X28
1X28
1X28
1X35
1X35
1X35
1X35
1X35
1X35
1X42
Dimensions
[mm]
Air flow rate
[n°x ø mm]
1x16
1x16
1x18
1x18
1X28
1X28
1x28
1x28
1X28
1X28
1X35
1X35
1X35
1X28
1X28
1X28
1X28
1X28
1X35
1X35
1X35
1X35
1X35
1X42
1X42
1X42
1X48
1X48
1X48
1X48
1X48
1X48
1X54
Fans
[m3/h]
2500
2200
1400
3000
3900
5100
4750
3550
4850
4600
7800
11000
3500
4450
5000
6500
7350
9150
8700
8900
13500
19100
15500
18300
10000
17400
28650
13350
16050
28650
27450
21400
36600
28150
30200
28150
21550
28400
36850
25500
32650
55650
77500
117000
91200
73700
111300
60400
38700
35400
58050
53100
Model
CSEX3012BM
CSEX3013BM
CSEX3014SM
CSEX3022SM
CSEX5013STY
CSEX5013STD
CSEX5014SM
CSEX5014EM
CSEX5014STD
CSEX5015STD
CSEX5023STY
CSEX5024BTY
CSEX5025ETY
CSEX6013ETD
CSEX6014STY
CSEX6014STD
CSEX6014BTY
CSEX6014BTD
CSEX6015BTD
CSEX6023ETD
CSEX6023STD
CSEX6023BTD
CSEX6023BTY
CSEX6024BTD
CSEX6024STY
CSEX6025BTD
CSEX6033BTD
CSEX6033ETD
CSEX6033STY
CSEX6033BTY
CSEX6034BTD
CSEX6043STY
CSEX6044BTD
CSEX8023STD
CSEX8023BTY
CSEX8023STD
CSEX8023STY
CSEX8024BTY
CSEX8024BTD
CSEX8033ETD
CSEX8033STY
CSEX8034BTD
CSEX8043BTD
CSEX8063BTD
CSEX8063BTY
CSEX8044BTD
CSEX8064BTD
CSEX8064STY
CSEX9024BTD
CSEX9026BTD
CSEX9034BTD
CSEX9036BTD
[n°]
1
1
1
2
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
2
2
2
2
2
2
2
3
3
3
3
3
4
4
2
2
2
2
2
2
3
3
3
4
6
6
4
6
6
2
2
3
3
Fans
Technical and dimensional data
C
299
Choosing the unit
WTE - WTR - WDR - WTS - WTA
Field configuration:
1 2 3
4
5
6 7
8
9
10
11
||||||||
Code
|
ø[dm] fans
|
n° rows
|
Power supply
|
|n° fans motorElectrical
Fluido Type
connection
Code:
WTS-WTE-WTR-WTA-WDR
Fluido:
° -Acqua o acqua glicolata con PS max 6 bar
ø[dm] fans:
3 - 350
5 - 500
6 - 630
8 - 800
9 - 910
N° fans:
* - up 1 to 16
N° rows:
* - up 1to 6
Dry coolers
Motor type:
B - Standard
S - Silenced
E - Extra silenced
Power suppluy:
T - 400V/3/50Hz
M - 230V/1/ 50Hz
Electrical connection:
D - Triangle
° -mono-phase
WTE
WTR-WDR
WTS
WTA
WTE
Features
WTE RANGE
General features
• Design has privileged modularity, each unit is
made up from standard sections, whose elements
can be easily removed
• Parting from the WTE 563 for the ø 500 range,
from the WTE 663 for the ø 630 range, models are
found that are made up from two flanked units,
thus making vertical installation impossible.
All of the other models are designed for both horizontal and vertical installation. The support feet
supplied can be used in both cases.
• To ease the connection of the electric system chillers, the fan motors are wired in the factory (excluding 350 diameter range) and connected to a junction box positioned on the collectors side and
protected along with the latter by a lid that can be
easily removed.
Construction features
• They are designed for outdoor installation and therefore manufactured with technologies and materials that guarantee resistance to atmospheric
agents
• Coils with staggered copper pipes and corrugated
or mechanically expanded aluminium louvers. The
coils are fixed to the shoulders in a way to prevent
pipe breakage due to any vibrations.
• Iron collectors with GAS threading.
• Latest generation axial fans to guarantee silent functioning and high performance with IP54 protection rating: They are envisioned for D/Y connections and different polarities and allow continuous
regulation of the speed via voltage reduction.
(B) basic
(S) silent
(E) Super silent.
WTA RANGE
General features
• Two exchangers positioned as W
• Two rows of fans with diameter of 800mm
• Separate ventilation compartments for each fan
300
agents
• High efficiency louvred heat exchangers
• Latest generation axial fans to guarantee silent functioning and high performance with IP54 protection rating: The standard units are supplied with
the fans wired onto the junction box. Air flow
separator for each individual fan.
(BT) basic 6-pole
(ST) silent 8-pole
(ET) Super silent 12-pole
WTR RANGE
General features
• V exchangers configuration
• Low noise
• Two rows of fans with diameter of 800mm
agents
separator for each individual fan.
(BT) basic 6-pole
(ST) silent 8-pole
WTS RANGE
General features
• Two exchangers positioned as V
• Fans diameter 500 mm
agents
• Latest generation axial fans to guarantee silent functioning and high performance with IP54 protection rating. The standard units are supplied with
fans wired on junction box. Air flow separator for
each individual fan. The extremely small dimensions allow installation in contained spaces, high
output power per surface occupied
(BT) basic 4-pole
(ST) silent 6-pole
WTR RANGE
General features
• Two exchangers positioned as V
• Fans diameter 800 mm
agents
separator for each individual fan. The extremely
small dimensions allow installation in contained
spaces, high output power per surface occupied
(BT) basic 6-pole
(ST) silent 8-pole
Model WTE
wiring connec.
WTE°0312BM
WTE °0313BM
WTE°0314BM
WTE°0322BM
WTE°0323BM
WTE°0324BM
WTE°0332BM
WTE°0333BM
WTE°0334BM
WTE°0342BM
WTE°0343BM
WTE°0344BM
WTE°0362BM
WTE°0363BM
WTE°0364BM
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
ø Fans
[dm]
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
WTE°0312SM
WTE°0313SM
WTE°0314SM
WTE°0322SM
WTE°0323SM
WTE°0324SM
WTE°0332SM
WTE°0333SM
WTE°0334SM
WTE°0342SM
WTE°0343SM
WTE°0344SM
WTE°0362SM
WTE°0363SM
WTE°0364SM
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Fan
[n°]
1
1
1
2
2
2
3
3
3
4
4
4
6
6
6
Rows
[n°]
2
3
4
3
3
4
2
3
4
2
3
4
2
3
4
1
1
1
2
2
2
3
3
3
4
4
4
6
6
6
2
3
4
3
3
4
2
3
4
2
3
4
2
3
4
air flow rate Power
[m3/h]
[kW]
2.500
4,6
2.200
6
2400
7,4
5000
9,2
4400
12
4800
15
7500
14
6600
18
7200
22
10000
18
8800
24
9600
30
15000
28
13200
38
14400
47
WTE°0513 BT
triangle
5
1
3
WTE°0514 BT
triangle
5
1
4
WTE°0515 BT
triangle
5
1
5
WTE°0522 BT
triangle
5
2
2
WTE°0523 BT
triangle
5
2
3
WTE°0524 BT
triangle
5
2
4
e Sound pressure measured in free field at a distance of 10m and
directionality factor = 2;
1500
1300
1400
3000
2600
2800
4500
3900
4200
6000
5200
5600
9000
7800
8400
Sound pressure
dB(A)
36
36
36
39
39
39
41
41
41
42
42
42
44
44
44
A
820
820
820
820
820
820
820
820
820
820
820
820
820
820
820
Dimensions [mm]
B
620
620
620
620
620
620
620
620
620
1200
1200
1200
1200
1200
1200
C
760
760
760
1310
1310
1310
1860
1860
1860
1310
1310
1310
1860
1860
1860
26
26
26
29
29
29
31
31
31
32
32
32
34
34
34
820
820
820
820
820
820
820
820
820
820
820
820
820
820
820
620
620
620
620
620
620
620
620
620
1200
1200
1200
1200
1200
1200
760
760
760
1310
1310
1310
1860
1860
1860
1310
1310
1310
1860
1860
1860
48
48
48
51
51
51
1060
1060
1060
1060
1060
1060
833
833
833
833
833
833
1105
1105
1105
2045
2045
2045
3,6
4,4
5
7,4
9
10
11
14
16
15
18
20
24
28
32
7750
17
7400
20
7100
23
16000
26
15500
35
14800
42
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
301
Model WTE
WTE
Model WTE
wiring connec.
WTE°0525BT
WTE°0533BT
WTE°0534BT
WTE°0535BT
WTE°0543BT
WTE°0544BT
WTE°0545BT
WTE°0563BT
WTE°0564BT
WTE°0565BT
WTE°0583BT
WTE°0584BT
WTE°0585BT
WTE°0513ST
WTE°0514ST
WTE°0515ST
WTE°0522ST
WTE°0523ST
WTE°0524ST
WTE°0525ST
WTE°0533ST
WTE°0534ST
WTE°0535ST
WTE°0543ST
WTE°0544ST
WTE°0545ST
WTE°0563ST
WTE°0564ST
WTE°0565ST
WTE°0583ST
WTE°0584ST
WTE°0585ST
WTE°0513ET
WTE°0514ET
WTE°0515ET
WTE°0522ET
WTE°0523ET
WTE°0524ET
WTE°0525ET
WTE°0533ET
WTE°0534ET
WTE°0535ET
WTE°0543ET
WTE°0544ET
WTE°0545ET
WTE°0563ET
WTE°0564ET
WTE°0565ET
WTE°0583ET
WTE°0584ET
WTE°0585ET
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
ø Fans
[dm]
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
WTE°0513BM
WTE°0514BM
WTE°0515BM
WTE°0522BM
WTE°0523BM
WTE°0524BM
WTE°0525BM
WTE°0533BM
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
5
5
5
5
5
5
5
5
Fan
[n°]
2
3
3
3
4
4
4
6
6
6
8
8
8
1
1
1
2
2
2
2
3
3
3
4
4
4
6
6
6
8
8
8
1
1
1
2
2
2
2
3
3
3
4
4
4
6
6
6
8
8
8
Rows
[n°]
5
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
2
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
2
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
1
1
1
5
2
2
2
3
3
4
5
5
3
4
5
3
air flow rate Power
[m3/h]
[kW]
14200
47
23250
54
22200
63
21300
70
31000
71
29600
83
28400
96
46500
108
44400
126
42600
140
62000
142
59200
166
56800
192
5100
13
4850
11
4600
17
10650
21
10200
27
9700
32
9200
34
15300
41
14550
48
13800
52
20400
56
19400
64
18400
69
30600
82
29100
96
27600
104
40800
112
38800
129
36800
139
3350
10
3200
11
3000
12
7300
17
6700
21
6400
24
6000
25
10050
31
9600
36
9000
38
13400
42
12800
48
12000
50
20100
63
19200
72
18000
75
26800
84
25600
97
24000
100
302
7360
7030
6745
15200
14720
14060
13490
22080
Sound pressure
dB(A)
51
53
53
53
54
54
54
56
56
56
57
57
57
38
38
38
41
41
41
41
43
43
43
44
44
44
46
46
46
47
47
47
32
32
32
35
35
35
35
37
37
37
38
38
38
40
40
40
41
41
41
45
45
45
48
48
48
48
50
16
20
22
26
34
41
45
52
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
A
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
Dimensions [mm]
B
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
C
2045
2985
2985
2985
3925
3925
3925
2985
2985
2985
3925
3925
3925
1105
1105
1105
2045
2045
2045
2045
2985
2985
2985
3925
3925
3925
2985
2985
2985
3925
3925
3925
1105
1105
1105
2045
2045
2045
2045
2985
2985
2985
3925
3925
3925
2985
2985
2985
3925
3925
3925
1060
1060
1060
1060
1060
1060
1060
1060
833
833
833
833
833
833
833
833
1105
1105
1105
2045
2045
2045
2045
2985
wiring connec.
WTE°0534BM
WTE°0535BM
WTE°0543BM
WTE°0544BM
WTE°0545BM
WTE°0563BM
WTE°0564BM
WTE°0565BM
WTE°0583BM
WTE°0584BM
WTE°0585BM
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
ø Fans
[dm]
5
5
5
5
5
5
5
5
5
5
5
Fan
[n°]
3
3
4
4
4
6
6
6
8
8
8
Rows
[n°]
4
5
3
4
5
3
4
5
3
4
5
air flow rate Power
[m3/h]
[kW]
21090
61
20235
67
29440
69
28120
80
26980
92
44160
104
42180
122
40470
135
58880
137
56240
160
53960
185
WTE°0513SM
WTE°0514SM
WTE°0515SM
WTE°0522SM
WTE°0523SM
WTE°0524SM
WTE°0525SM
WTE°0533SM
WTE°0534SM
WTE°0535SM
WTE°0543SM
WTE°0544SM
WTE°0545SM
WTE°0563SM
WTE°0564SM
WTE°0565SM
WTE°0583SM
WTE°0584SM
WTE°0585SM
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
1
1
1
2
2
2
2
3
3
3
4
4
4
6
6
6
8
8
8
3
4
5
2
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
5000
4750
4510
10440
10000
9500
9020
15000
14250
15350
20000
19000
18040
30000
28500
27060
40000
38000
36080
13
15
17
21
27
31
34
40
47
51
55
65
68
80
95
102
111
127
136
35
35
35
38
38
38
38
40
40
40
41
41
41
43
43
43
44
44
44
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
1105
1105
1105
2045
2045
2045
2045
2985
2985
2985
3925
3925
3925
2985
2985
2985
3925
3925
3925
WTE°0513 EM
WTE°0514 EM
WTE°0515 EM
WTE°0522 EM
WTE°0523 EM
WTE°0524 EM
WTE°0525 EM
WTE°0533 EM
WTE°0534 EM
WTE°0535 EM
WTE°0543 EM
WTE°0544 EM
WTE°0545 EM
WTE°0563 EM
WTE°0564 EM
WTE°0565 EM
WTE°0583 EM
WTE°0584 EM
WTE°0585 EM
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
1
1
1
2
2
2
2
3
3
3
4
4
4
6
6
6
8
8
8
3
4
5
2
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
3720
3550
3330
8100
7440
7100
6660
11160
10650
9990
14880
14200
13320
22320
21300
19980
29760
28400
26640
11
12
13
18
22
25
27
34
38
41
45
51
55
68
76
82
90
102
109
32
32
32
35
35
35
35
37
37
37
38
38
38
40
40
10
41
41
41
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
833
1105
1105
1105
2045
2045
2045
2045
2985
2985
2985
3925
3925
3925
2985
2985
2985
3925
3925
3925
WTE°0613BT
WTE°0614BT
WTE°0615BT
WTE°0623BT
WTE°0624BT
WTE°0625BT
WTE°0633BT
WTE°0634BT
WTE°0635BT
WTE°0643BT
WTE°0644BT
WTE°0645BT
WTE°0663BT
WTE°0664BT
WTE°0665BT
WTE°0683BT
WTE°0684BT
WTE°0685BT
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1
1
1
2
5
2
3
3
3
4
4
4
6
6
6
8
8
8
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
9550
9150
8700
19100
18300
17400
28650
27450
26100
38200
36600
34800
57300
54900
52200
76400
73200
69600
23
28
31
48
56
62
74
85
93
98
113
123
147
171
186
195
226
246
49
49
49
52
52
52
54
54
54
55
55
55
57
57
57
58
58
58
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1340
1340
1340
2500
2500
2500
3660
3660
3660
4820
4820
4820
3660
3660
3660
4820
4820
4820
WTE°0613ST
WTE°0614ST
WTE°0615ST
triangle
triangle
triangle
6
6
6
1
1
1
3
4
5
6750
6500
6200
19
22
24
42
42
42
1200
1200
1200
1033
1033
1033
1340
1340
1340
Sound pressure
dB(A)
50
50
51
51
51
53
53
53
54
54
54
A
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
1060
Dimensions [mm]
B
833
833
833
833
833
833
833
833
833
833
833
C
2985
2985
3925
3925
3925
2985
2985
2985
3925
3925
3925
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
303
Model WTE
WTE
Model WTE
wiring connec.
WTE°0623ST
WTE°0624ST
WTE°0625ST
WTE°0633ST
WTE°0634ST
WTE°0635ST
WTE°0643ST
WTE°0644ST
WTE°0645ST
WTE°0663ST
WTE°0664ST
WTE°0665ST
WTE°0683ST
WTE°0684ST
WTE°0685ST
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
ø Fans
[dm]
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Fan
[n°]
2
2
2
3
3
3
4
4
4
6
6
6
8
8
8
Rows
[n°]
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
air flow rate Power
[m3/h]
[kW]
13500
38
13000
45
12400
48
20250
58
19500
67
18600
73
27000
77
26000
88
24800
98
40500
116
39000
134
37200
147
54000
154
52000
177
49600
196
WTE°0613ET
WTE°0614ET
WTE°0615ET
WTE°0623ET
WTE°0624ET
WTE°0625ET
WTE°0633ET
WTE°0634ET
WTE°0635ET
WTE°0643ET
WTE°0644ET
WTE°0645ET
WTE°0663ET
WTE°0664ET
WTE°0665ET
WTE°0683ET
WTE°0684ET
WTE°0685ET
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1
1
1
2
2
2
3
3
3
4
4
4
6
6
6
8
8
8
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
3
4
5
4450
4300
4050
8900
8600
8100
13350
12900
12150
17800
17200
16200
26700
25800
24300
35600
34400
32400
14
16
17
29
33
35
44
50
53
59
67
69
89
100
105
118
133
139
32
32
32
35
35
35
37
37
37
38
38
38
40
40
40
41
41
41
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1340
1340
1340
2500
2500
2500
3660
3660
3660
4820
4820
4820
3660
3660
3660
4820
4820
4820
WTE°0913BT
WTE°0914BT
WTE°0916BT
WTE°0923BT
WTE°0924BT
WTE°0926BT
WTE°0933BT
WTE°0934BT
WTE°0936BT
WTE°0943BT
WTE°0944BT
WTE°0946BT
WTE°0963BT
WTE°0964BT
WTE°0966BT
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
1
1
1
2
2
2
3
3
3
4
4
4
6
6
6
3
4
6
3
4
6
3
4
6
3
4
6
3
4
6
20400
19350
17700
40800
38700
35400
61200
58050
53100
81600
77400
70800
122400
116100
106200
47
55
65
96
111
133
144
168
195
191
223
267
289
335
390
56
56
56
59
59
59
61
61
61
62
62
62
64
64
64
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1633
1633
1633
3063
3063
3063
4493
4493
4493
3063
3063
3063
4493
4493
4493
WTE°0913ST
WTE°0914ST
WTE°0916ST
WTE°0923ST
WTE°0924ST
WTE°0926ST
WTE°0933ST
WTE°0934ST
WTE°0936ST
WTE°0943ST
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
9
9
9
9
9
9
9
9
9
9
1
1
1
2
2
2
3
3
3
4
3
4
6
3
4
6
3
4
6
3
15000
14050
12900
30000
28100
25800
45000
42150
38700
60000
39
45
51
78
91
104
118
133
158
156
50
50
50
53
53
53
55
55
55
56
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1633
1633
1633
3063
3063
3063
4493
4493
4493
3063
304
Sound pressure
dB(A)
45
45
45
47
47
47
48
48
48
50
50
50
51
51
51
A
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
Dimensions [mm]
B
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
1033
C
2500
2500
2500
3660
3660
3660
4820
4820
4820
3660
3660
3660
4820
4820
4820
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
wiring connec.
WTE°0944ST
WTE°0946ST
WTE°0963ST
WTE°0964ST
WTE°0966ST
triangle
triangle
triangle
triangle
triangle
ø Fans
[dm]
9
9
9
9
9
WTE°0913ET
WTE°0914ET
WTE°0916ET
WTE°0923ET
WTE°0924ET
WTE°0926ET
WTE°0933ET
WTE°0934ET
WTE°0936ET
WTE°0943ET
WTE°0944ET
WTE°0946ET
WTE°0963ET
WTE°0964ET
WTE°0966ET
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
Fan
[n°]
4
4
6
6
6
Rows
[n°]
4
6
3
4
6
1
1
1
2
2
2
3
3
3
4
4
4
6
6
6
3
4
6
3
4
6
3
4
6
3
4
6
3
4
6
air flow rate Power
[m3/h]
[kW]
56200
183
51600
208
90000
235
84300
267
77400
316
9200
8600
7800
18400
17200
15600
27600
25800
23400
36800
34400
31200
55200
51600
46800
Sound pressure
dB(A)
56
56
58
58
58
A
1530
1530
1530
1530
1530
Dimensions [mm]
B
1434
1434
1434
1434
1434
C
3063
3063
4493
4493
4493
38
38
38
41
41
41
43
43
43
44
44
44
46
46
46
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1530
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1434
1633
1633
1633
3063
3063
3063
4493
4493
4493
3063
3063
3063
4493
4493
4493
28
32
35
57
65
70
87
96
106
115
129
141
174
193
212
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
WTS
Model WTS
wiring connec.
WTS°0523BT
WTS°0524BT
WTS°0533BT
WTS°0534BT
WTS°0543BT
WTS°0544BT
WTS°0553BT
WTS°0554BT
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
ø Fans
[dm]
5
5
5
5
5
5
5
5
Fan
[n°]
2
2
3
3
4
4
5
5
Rows
[n°]
3
4
3
4
3
4
3
4
air flow rate Power
[m3/h]
[kW]
15.800
46
15.200
51
23700
69
22800
77
31600
92
30400
103
39500
115
38000
128
WTS°0523ST
WTS°0524ST
WTS°0533ST
WTS°0534ST
WTS°0543ST
WTS°0544ST
WTS°0553ST
WTS°0554ST
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
5
5
5
5
5
5
5
5
2
2
3
3
4
4
5
5
3
4
3
4
3
4
3
4
10400
10000
15600
15000
20800
20000
26000
25000
38
41
57
62
76
82
95
103
41
41
43
43
44
44
45
45
1065
1065
1065
1065
1065
1065
1065
1065
780
780
780
780
780
780
780
780
1610
1610
2265
2265
2920
2920
3575
3575
WTS°0523ET
WTS°0524ET
WTS°0533ET
WTS°0534ET
WTS°0543ET
WTS°0544ET
WTS°0553ET
WTS°0554ET
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
5
5
5
5
5
5
5
5
2
2
3
3
4
4
5
5
3
4
3
4
3
4
3
4
6800
6500
10200
9750
13600
13000
17000
16250
27
29
41
44
54
58
66
71
34
34
36
36
37
37
38
38
1065
1065
1065
1065
1065
1065
1065
1065
780
780
780
780
780
780
780
780
1610
1610
2265
2265
2920
2920
3575
3575
Sound pressure
dB(A)
51
51
53
53
54
54
55
55
A
1065
1065
1065
1065
1065
1065
1065
1065
Dimensions [mm]
B
780
780
780
780
780
780
780
780
C
1610
1610
2265
2265
2920
2920
3575
3575
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
305
Model WTA
WTR
Model WTR
wiring connec.
WTR°0823BT
WTR°0824BT
WTR°0833BT
WTR°0834BT
WTR°0843BT
WTR°0844BT
WTR°0853BT
WTR°0854BT
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
ø Fans
[dm]
8
8
8
8
8
8
8
8
Fan
[n°]
2
2
3
3
4
4
5
5
Rows
[n°]
3
4
3
4
3
4
3
4
air flow rate Power
[m3/h]
[kW]
46.000
131
45.000
150
70000
204
66000
229
92000
275
88500
307
114000
338
112000
390
WTR°0823ST
WTR°0824ST
WTR°0833ST
WTR°0834ST
WTR°0843ST
WTR°0844ST
WTR°0853ST
WTR°0854ST
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
8
8
8
8
8
8
8
8
2
2
3
3
4
4
5
5
3
4
3
4
3
4
3
4
34000
32000
50500
48000
67000
63000
83500
80000
112
122
167
183
223
240
279
298
43
43
45
45
46
46
47
47
1590
1590
1590
1590
1590
1590
1590
1590
1100
1100
1100
1100
1100
1100
1100
1100
2270
2270
3210
3210
4180
4180
5150
5150
WTR°0823ET
WTR°0833ET
WTR°0843ET
WTR°0853ET
triangle
triangle
triangle
triangle
8
8
8
8
2
3
4
5
3
3
3
3
21100
31750
42300
52900
79
121
162
203
33
35
36
37
1590
1590
1590
1590
1100
1100
1100
1100
2270
3210
4180
5150
Sound pressure
dB(A)
51
51
53
53
54
54
55
55
A
1590
1590
1590
1590
1590
1590
1590
1590
Dimensions [mm]
B
1100
1100
1100
1100
1100
1100
1100
1100
C
2270
2270
3210
3210
4180
4180
5150
5150
wiring connec.
WTA°0843ST
WTA°0844ST
WTA°0863ST
WTA°0864ST
WTA°0883ST
WTA°0884ST
WTA°08103ST
WTA°08104ST
WTA°08123ST
WTA°08124ST
WTA°08143ST
WTA°08144ST
WTA°08163ST
WTA°08164ST
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
ø Fans
[dm]
8
8
8
8
8
8
8
8
8
8
8
8
8
8
WTA°0843 ET
WTA°0863 ET
WTA°0883 ET
WTA°08103 ET
WTA°08123 ET
WTA°08143 ET
WTA°08163 ET
triangle
triangle
triangle
triangle
triangle
triangle
triangle
8
8
8
8
8
8
8
Fan
[n°]
4
4
6
6
8
8
10
10
12
12
14
14
16
16
Rows
[n°]
3
4
3
4
3
4
3
4
3
4
3
4
3
4
4
6
8
10
12
14
16
6
3
3
3
3
3
3
air flow rate Power
[m3/h]
[kW]
62000
220
60000
236
87000
297
82000
316
116000
398
110000
424
147000
517
142000
551
170000
593
162000
632
202000
694
187000
739
230000
796
215000
847
37400
52500
70300
89900
105100
122800
140600
Sound pressure
dB(A)
46
46
48
48
49
49
50
50
51
51
51
51
52
52
A
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
Dimensions [mm]
B
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
C
3250
3250
3850
3850
5100
5100
8100
8100
8700
8700
9950
9950
11200
11200
36
38
39
40
41
41
42
2090
2090
2090
2090
2090
2090
2090
2200
2200
2200
2200
2200
2200
2200
3250
3850
5100
8100
8700
9950
11200
Sound pressure
dB(A)
54
54
56
56
57
57
58
58
A
2150
2150
2150
2150
2150
2150
2150
2150
Dimensions [mm]
B
1850
1850
1850
1850
1850
1850
1850
1850
C
2270
2270
3240
3240
4210
4210
5180
5180
159
218
292
377
436
510
584
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
WDR
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
Model WDR
Model WTA
WTA°0843BT
WTA°0844BT
WTA°0863BT
WTA°0864BT
WTA°0883BT
WTA°0884BT
WTA°08103BT
WTA°08104BT
WTA°08123BT
WTA°08124BT
WTA°08143BT
WTA°08144BT
WTA°08163BT
WTA°08164BT
wiring connec.
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
ø Fans
[dm]
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Fan
[n°]
4
4
6
6
8
8
10
10
12
12
14
14
16
16
Rows
[n°]
3
4
3
4
3
4
3
4
3
4
3
4
3
4
air flow rate Power
[m3/h]
[kW]
84.000
283
82.000
314
122000
391
112000
422
165000
525
153000
569
205000
674
190000
736
242000
782
222000
844
282000
916
258000
991
324000
1050
296000
1138
306
Sound pressure
dB(A)
54
54
56
56
57
57
58
58
59
59
59
59
60
60
A
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
2090
Dimensions [mm]
B
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
C
3250
3250
3850
3850
5100
5100
8100
8100
8700
8700
9950
9950
11200
11200
wiring connec.
WDR°0843BT
WDR°0844BT
WDR°0863BT
WDR°0864BT
WDR°0883BT
WDR°0884BT
WDR°08103BT
WDR°08104BT
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
ø Fans
[dm]
8
8
8
8
8
8
8
8
Fan
[n°]
4
4
6
6
8
8
10
10
Rows
[n°]
3
4
3
4
3
4
3
4
air flow rate Power
[m3/h]
[kW]
77.100
232
70.400
254
115700
349
105500
381
154200
467
140700
508
192800
583
176000
635
WDR°0843ST
WDR°0844ST
WDR°0863ST
WDR°0864ST
WDR°0883ST
WDR°0884ST
WDR°08103ST
WDR°08104ST
triangle
triangle
triangle
triangle
triangle
triangle
triangle
triangle
8
8
8
8
8
8
8
8
4
4
6
6
8
8
10
10
3
4
3
4
3
4
3
4
55000
50000
82000
74500
110000
99000
136000
125000
188
203
286
301
384
405
476
507
46
46
48
48
49
49
50
50
2150
2150
2150
2150
2150
2150
2150
2150
1850
1850
1850
1850
1850
1850
1850
1850
2270
2270
3240
3240
4210
4210
5180
5180
WDR°0843ET
WDR°0863ET
WDR°0883ET
WDR°08103ET
triangle
triangle
triangle
triangle
8
8
8
8
4
6
8
10
3
3
3
3
33350
49900
66600
83250
137
206
274
343
36
38
39
40
2150
2150
2150
2150
1850
1850
1850
1850
2270
3240
4210
5180
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
- Ta = 25°C
- Twi = 40 °C
- Two = 35 °C
- Glyvol = 34%
307
Cod.: SDRYCOOLERUI.02 / 1201
WTA
Technical data
DMP
Mod.
Nominal dehumidification capacity (1)
Nominal input power (1)
Nominal input current (1)
Dehumidification capacity (2)
Input power (2)
Heating capacity produced - normal working conditions in heating mode (3)
Input power (3)
Maximum current absorbed
Peak current
Nominal water flow rate
Pressure drop
R134a
Recessed dehumidifier
for floor systems
e Sound Pressure
Weight
B
B
DMP 20
20
340
2,3
49
390
1010
25
2,5
4
170
7
200
300
380
33
36
l/24h
W
A
l/24h
W
W
W
A
A
l/h
kPa
m3/h (min.)
Air flow rate
m3/h (max.)
dB [A]
kg
The performance refers to the following
conditions:
-
-
-
Dehumidification
(1) = Nominal conditions (min. fan speed)
Room air temperature: 26°C
Relative humidity: 65%
Water input temperature: 15°C
(2)
-
-
-
= Maximum conditions (min. fan speed)
Relative humidity: 80%
-
-
Heating
(3) = Rapid heating at normal conditions
(min. fan speed)
Power supply voltage = 230V/1/50Hz.
 Sound pressure measured in free field with directionality factor Q=2 at a distance of 1 m
(minimum fan speed).
In compliance with the ISO 3746
A
A
C
White:
front panel: RAL 9010
DMP 20
C
B
B
B
A
A
C
Height
Width
Depth
Monobloc
dehumidifier unit
DMP 20 GLB
DMP 20
[mm] (A)
[mm] (B)
[mm] (C)
Monobloc
dehumidifier
unit
External frame
Front panel
Formwork
590
750
210
678
843
8
596
761
18
606
771
227
C
A
A
DMP 20GL
C
C
B
B
• Components:
DMP 20: Monobloc dehumidifier unit, recessed inside the formwork.
- electrostatically pre-charged air filter;
- condensate drip tray;
- hermetic compressor assembled on rubber
The DMP dehumidifiers can be integrated peranti-vibration mounts;
fectly in residential and tertiary environments - condensing and evaporating coils realised in
with:
copper pipes and aluminium louvers;
- floor systems;
- pre-cooling coil: to improve the dehumidifica• Main features:
- vertical installation recessed in the wall;
- silenced functioning;
- small electric consumption;
- high dehumidification efficiency.
-
-
-
-
B
tion efficiency of the unit;
post-cooling coil: to control the temperature
of the outlet air and send thermally neutral air
to the room;
centrifugal flow fan with uneven pitch rotors
for silent functioning;
adjustment circuit board with remote control
panel.
Refrigerant gas: R134a.
B
B
A
A
A
B
A
A
A
Accessories
DMP 20GL: OBLIGATORY ACCESSORY
-Front closure panel with external frame: realised
in polyurethane powder painted galvanised steel
(colour RAL 9010). Made up from a frame and
panel with air recovery and flow grid in anodised aluminium.
-Formwork: In galvanised steel, it allows unit
308
installation in niche. The formwork has appro- rooms heated by the radiant system reaching
priate fins for correct fixing to the wall and is normal working conditions.
prepared with openings for electric and hydraulic connections;
In the winter season the DMP dehumidifier can
be used to accelerate the temperature of the
External frame
C
B
Front panel
B
C
B
C
Formwork
C
C
C
B
309
Cod.: SDMPUY.01 / 0903
Features
Technical data
FW-R
Mod.
Water-cooled air conditioners with capacities from 3 up to 4.5 kW
Cooling capacity
Input power
Input current
Water coil heating capacity
Water flow rate at coil
Water coil pressure drops
Electric heating capacity
Fans
R407C
Air flow rate
Fan speed
 Sound pressure
Water consumption at 16°C
Condenser pressure drops
Refrigerant charge
Peak current
Water connections
FW
W (max.)
W (med.)
W (min.)
W
A
W
l/h
kPa
W
n.
m3/h (max.)
m3/h (med.)
m3/h (min.)
g/m (max.)
g/m (med.)
g/m (min.)
dB (A)
l/h
kPa
kg
A
ø
137 R
3000
2640
2120
870
4,1
4350
600
12,6
1200
2
470
390
270
800
660
500
44
150
3,9
0,95
23
1/2”
167 R
4500
3750
3010
1250
6
5200
600
12,6
1200
2
690
525
375
1140
885
665
47,5
210
6,6
1,05
33,5
1/2”
e Sound pressure measured in an 85 m3 semi-reverberant test chamber
with reverberation time Tr = 0.5s.
Cooling:
- room air temperature 27 °C D.B. ; 19 °C W.B.
- maximum speed
FW-R series integrated system air conditioners are independent
appliances designed and built to create and maintain optimum room
comfort conditions.
Discreetly and elegantly styled, these remarkably quiet units are ideal
for installation in the home or commercial premises.
Equipped with a water-cooled condenser, FW-R appliances perform all
typical cooling, dehumidification, ventilation and air filtration functions
while offering particular benefits in terms of ease of application and
installation.
Suitable also for winter operation when equipped with an electric
heater or hot water coil; console air conditioners are able to provide
different microclimates within the same room because each appliance
can be adjusted independently; low running costs are assured by fast
arrival at the required room temperature because of the low thermal
inertia of the system; quiet operation and thermal efficiency are also
promoted by the heat and sound insulation of the compressor bay.
All appliances are factory assembled and individually tested.
Heating:
- maximum speed
Dimensions (mm)
Features
• High efficiency rotary compressor
• Compact size
• Quiet operation
• Automatic temperature adjustment
• Reduced water consumption
• Low electrical power consumption
Accessories
• BR: Armoured heating element with safety • BVR: Single row hot water coil.
thermostat.
374
137 R
167 R
✔
✔
✔
✔
Height
Width
Depth
Weight
A
B
C
FW 137 R
723
1121
242
63
FW 167 R
723
1121
242
67
Cod.: SFWUY.04 / 0009
FW
BR 26
BVR 1
375

Каталог продукции Aermec 2012

Transcription

Similar documents