lista general workbench and workspace furniture catalog

Transcription

lista general workbench and workspace furniture catalog
L I S TA G E N E R A L W O R K B E N C H A N D
W O R K S PA C E F U R N I T U R E C ATA L O G
Contents
Lista offers a comprehensive
array of innovative workspace
Lista – Making Workspace Work®
Workstations and Ergonomics
4
6
and accessory systems, all of
which are described in this catalog. Within the following pages,
you’ll find:
Workspace Furniture
8
• Easy-Order offerings of a
broad range of Lista products
• A wide selection of accessories that allow you to
create your own custom
solutions
Arlink® 8000 Workstations
• Solutions for almost any
workspace need, and much
more!
Arlink 8000 Components
You can use this catalog to
Arlink 8000 Easy-Order Combinations
12
18
Build-Your-Own Arlink 8000 Workstations
20
22
Arlink 8000 Flow Racks and Utility and Parts Carts
VSI (Vertical Space Integrator) Accessory System
29
31
For a complete list of contents for Arlink 8000 workstations, see page 13.
order the workspace systems
that exactly suit your individual
needs.
To help you navigate the
catalog, our sections are color
coded:
Align® Adjustable Height Workstations
Align Adjustable Height Workstation Easy-Order Combinations
Align Adjustable Height Workstation Components
®
Arlink 8000 Workstations
34
35
For a complete list of contents for Align workstations, see page 9.
Align® Adjustable Height
Workstations
Technical Electronic
Workstations
Industrial Workbenches
Technical Electronic Workstations
Cabinet Pedestals
Technical Electronic Workstation Easy-Order Combinations 40
Nexus System, including
Packing Benches, Stands
and Trolleys
Technical Electronic Workstation Components
For in-depth index, see page 99.
42
For a complete list of contents for technical electronic workstations, see page 9.
38
32
THE MOST COMPLETE, INTEGRATED SYSTEM OF
WORKSPACE SOLUTIONS YOU’LL FIND ANYWHERE
Industrial Workbenches
46
Industrial Workbench Easy-Order Combinations
Industrial Workbench Components
52
56
For a complete list of contents for industrial workbenches, see page 47.
Cabinet Pedestals
Narrow Width Cabinet Pedestals
60
60
Narrow Width Easy-Order Cabinet Combinations
MP Width Cabinet Pedestals
62
66
MP Width Easy-Order Cabinet Combinations
68
Lista Nexus System
Nexus Components
72
76
Nexus System Easy-Order Combinations
84
Nexus System Packing Benches
Nexus System Packing Bench Components
86
88
Nexus System Packing Bench Easy-Order Combinations
90
Nexus System Stationary Stands, Mobile Trolleys, Flow Racks
Nexus System Stationary Stand and Mobile Trolley Components
93
Nexus System Stationary Stand and Mobile Trolley Easy-Order Combinations
Nexus System Flow Rack Components
94
97
Nexus System Flow Rack Easy-Order Combinations
97
For a complete list of contents for Nexus system products, see page 73.
Seating
Index
99
98
92
Lista – Making Workspace Work®
At Lista, we provide the
most complete selection of
The workbench you want,
the way you want it.
workbenches, workspace furni-
No other workbench or work-
ture, accessories and more. We
space furniture supplier offers you
help you create work environ-
such a comprehensive collection of
ments that:
solutions. And we’re always explor-
• Are high quality
ing and developing new ways to
• Improve productivity
make your workspace work even
• Benefit the user through
smart ergonomic design
better. That’s why you can count on
• Offer unmatched flexibility
• The flexibility to interchange
accessories across our product
line, for a custom solution
without a custom price
• Are attractive and
comfortable
us to provide:
• The freedom to reconfigure
components and accessories to
exactly suit the needs of different
applications and users, no matter
how often they change
We can provide workspace
solutions that will fit the needs of
every department in a wide range
of facilities, including:
• R&D
• Manufacturing
• Assembly
• Quality control
• Maintenance & repair
• Shipping/receiving
• Laboratories
• Warehouse/distribution
• Service & repair
• Test & calibration
• Education
• And more
4
Built to last.
The result of high-quality,
all-steel construction and innovative
Our products feature a durable,
high-quality powder coat finish.
An investment in a Lista modular
engineering and design, Lista prod-
workspace system will still be pay-
ucts are built to provide decades of
ing dividends years from now.
functionality and ease of use in the
most demanding working environments. Each solution we offer
features superior stability and durability, the hallmarks of all Lista
products.
The industry’s best products
• Floorspace utilization analysis:
we can prepare CAD drawings of
site plans and elevations for a
grouping of products, or entire
room-sized solutions.
deserve the best support.
Lista has knowledgeable, helpful resellers throughout North
America. So no matter where you
are, the guidance, products and
support you need are always
nearby.
Our free design services are
actually priceless.
Lista’s engineering and design
team is ready to provide you with a
detailed plan for your individual
workspace and storage needs, free
of charge. We offer solutions that
are designed for maximum efficiency and future flexibility, optimizing space and profitability.
• Customized surveys and layouts: Lista experts will survey
your current and future storage
and workspace needs, and propose solutions that provide the
highest density and greatest productivity.
• Integration with architectural
and construction planning:
rely on our experience with coordinating with architectural and
construction professionals at any
stage of a project’s development.
• Price quotes: we are happy to
provide free estimates and price
quotes for any project, regardless
of size.
Custom applications that think
outside the box.
Custom applications are never
a problem at Lista. Our engineering and manufacturing teams will
work closely with you to analyze
your needs and modify our standard products to meet your
special requirements.
5
Lista – Putting Ergonomics in Their Place
No matter what kind of job
is performed at a Lista worksta-
Why are ergonomics important?
Twisting, lifting, bending, reach-
Get in the zone.
Work is most efficient when it’s
tion, your workers benefit from
ing – these movements can waste
kept within areas defined as “pri-
the most advanced application
time and put unnecessary stress on
mary reach zones” – the horizontal
of ergonomic science. They’ll be
your workers. Repetitive motion
and vertical areas a worker can
safer, more comfortable, more
injuries and other work-related
reach with minimal arm, head or
organized, and ultimately, more
musculoskeletal conditions increase
trunk movement (see illustrations
productive.
both downtime and workers’ com-
below). Work outside the primary
pensation costs. The application of
reach zones adds movement,
ergonomic principles can:
wastes time and erodes produc-
• Improve productivity by eliminating wasted motion
tivity.
• Minimize the risk of work
injuries
among tasks and workers, we can
• Reduce workers’ compensation
cases
By addressing the differences
develop ergonomic workspaces that
• Articulating arms that position
components and tools within
easy reach
• Other above-the-worksurface
accessories that minimize worker
strain
Our solutions keep workflow
fit just about any situation. In this
compact, organized and as close as
catalog, you’ll find:
possible to the primary reach zones,
• Height-adjustable worksurfaces
that can be raised or lowered
for less stress on your workers and
more efficiency and productivity for
your business.
Vertical Reach Zones
The primary reach zone is an
arc extending down from the
level of the operator’s heart.
6
Horizontal Reach Zones
1st. 5" to 7".
Reach objects moving
only the elbows.
2nd. 15" to 18".
Arm extension, using the rotary
joint and shoulder movement.
3rd. 24" to 30".
Full arm and trunk
movement needed.
4th.
Full body movement needed
to reach tools and equipment.
How do we make workspace
work so well?
To create your optimal Lista
• Will workstations be integrated
with material flow (racks or conveyors, for example)?
questions:
• Does the work process involve
handling heavy, bulky or awkward items?
• Is there a high product mix, with
many product changeovers every
day?
workspace designers and engineers
The economics of ergonomics.
Immediate increases in produc-
develop comprehensive technical
tivity mean greater profitability and
and design plans that illustrate the
a quick return on your investment.
workspace solutions and acces-
Long-term cost efficiency is deliv-
• Will employees work alone, backto-back or in teams?
sories that will help your operation
ered through reconfigurable compo-
become as safe and productive as
nents that keep pace with changes
• Does the workstation require
power tools, computer equipment, supplemental lighting or
storage space?
possible.
in your work processes. The safer
• Is there frequent job rotation? Do
workers from different shifts or
departments share a station?
workspace, we ask a lot of
Based on your answers, our
work environment provided through
ergonomic design helps minimize
the risk of work-related injuries, so
you also minimize workers’ compensation claims and lost days. Add it
all together, and the value of an
ergonomically designed Lista workspace solution is clear.
29.5"
Sitting
Standing
29.5" worksurface height will
accommodate 99.5% of all male
and 99.9% of all female workers.
Determine optimal worksurface height
depending on the type of work being
performed.
Align® and Arlink® 8000 workstation
worksurface heights can be easily
adjusted to accommodate the comfort and safety of your employees.
7
Lista Workspace Furniture
Technicians at ACD (Automated
Circuit Design) in Richardson, TX
design, fabricate and assemble
circuit boards on versatile Arlink®
8000 workstations. Testers at
double-sided workstations take
advantage of the Arlink 8000’s
ample electrical power and
extensive worksurface space.
Test instruments are stored out
of the way on wire shelves.
FUNCTIONAL, ATTRACTIVE TECHNICAL FURNITURE FOR
A WIDE RANGE OF ELECTRONIC AND ASSEMBLY TASKS
Lista Workspace Furniture
Arlink® 8000 Workstation Features
15
Arlink 8000 Workstation Trim Colors
16
Arlink 8000 Workstation Configuration Options
17
Arlink 8000 Workstation Easy-Order Combinations
Arlink 8000 Workstation Worksurfaces
19
Build Your Own Arlink 8000 Workstations
Arlink 8000 Workstation Accessories
Arlink 8000 Flow Racks
18
20
22
29
Arlink 8000 Progressive Assembly Systems
Arlink 8000 Utility and Parts Carts
30
30
VSI (Vertical Space Integrator) Accessory System
Align® Adjustable Height Workstation
31
32
Align Adjustable Height Workstation Easy-Order Combinations
Align Adjustable Height Workstation Bases
35
Align Adjustable Height Workstation Accessories
Technical Electronic Workstations
34
36
38
Technical Electronic Workstation Easy-Order Combinations
Align and Technical Electronic Workstation Worksurfaces
Technical Electronic Workstation Components
43
Workstation and Workbench ESD Accessories
43
How to Order Technical Electronic Workstations
40
42
45
For laboratory cabinets and casework,
see Lista’s General Storage Catalog.
9
Lista Workspace Furniture Makes Any Workspace Work
Workcells for assembling pulse oximeters take advantage of the flexible configurability of the Arlink® 8000 system. Whether the task is pro-
No matter what you’re working
gressive assembly or piece work, mobile Arlink 8000 workstations can
on, Lista’s wide range of techni-
be quickly and easily configured to accommodate workflow.
cal workspace furniture systems
have the variety, durability and
flexibility to meet your needs.
Maximum ergonomic comfort and
Technical electronic workstations have the versa-
increased productivity are hall-
tility to adapt to a wide range of tasks. At this
marks of the Align® Adjustable
manufacturing facility for electric power systems,
Height Workstation. Whatever
tech legs are combined with the VSI accessory
the ideal worksurface height for
system and integrated with a conveyor system for
the task at hand, the worksta-
maximum productivity on the assembly line.
tion’s 16" vertical height adjustability is up (or down) to the job.
10
Technical electronic workstations are ideally suited
for a variety of assembly and testing tasks, includTechnical electronic workstations
ing static-sensitive operations and environments.
can be outfitted with cabinet
pedestals for easy access to
stored tools and parts.
Align® Adjustable Height Workstations can be equipped for a
Arlink 8000 uprights can be used
for a wide range of tasks, including as convenient, versatile
shelving and storage.
variety of electronic, assembly
and light manufacturing tasks,
including static-sensitive operations. The addition of the Nexus
Accessory System, with its wide
range of accessories, allows each
workstation to be equipped to
exactly suit the work being done.
11
Lista Arlink 8000 Workstations
®
Nonin, a manufacturer of physiological monitoring solutions, relies on
Arlink 8000 workstations throughout its Plymouth, MN facility. Singleand double-sided mobile workstations with optional footrests enable
the quick, effortless reconfiguration that medical device manufacturing demands.
FULLY INTEGRATED, DURABLE AND CUSTOMIZABLE
MODULAR SYSTEMS FOR PRODUCTIVE WORKSPACE
Arlink ® 8000 Workstations
Arlink 8000 Workstation Features
15
Arlink 8000 Workstation Definite Positioning System®
Arlink 8000 Workstation Trim Colors
16
16
Arlink 8000 Workstation Configuration Options
Arlink 8000 Conveyor Workstations
17
17
Arlink 8000 Workstation Easy-Order Combinations
Arlink 8000 Workstation Worksurfaces
18
19
Build Your Own Arlink 8000 Workstations
20
Build Your Own Arlink 8000 Mobile Workstations
Arlink 8000 Workstation Accessories
21
22
Arlink 8000 Workstation Shelves
22
Arlink 8000 Workstation Lighting
23
Arlink 8000 Workstation Utility Accessories
24
Arlink 8000 Workstation Hanging Cabinets and Drawers
Arlink 8000 Workstation Overhead Cabinets
25
25
Arlink 8000 Workstation Panels and Markerboard/Tackboards
Arlink 8000 Workstation Parts Bin Rails
26
Arlink 8000 Workstation Tool and Parts Holders
Arlink 8000 Workstation ESD Accessories
Arlink 8000 Workstation CPU Holder
Arlink 8000 Workstation Footrests
26
27
27
27
Arlink 8000 Workstation Keyboard Holder
Arlink 8000 Workstation Pivoting Accessories
Arlink 8000 Flow Racks
25
27
28
29
Arlink 8000 Progressive Assembly Systems
Arlink 8000 Utility and Parts Carts
30
30
VSI (Vertical Space Integrator) Accessory System
31
13
Arlink® 8000 Workstations
Completely integrated and
Maximum return on investment
modular, Arlink 8000 worksta-
Arlink 8000 workstations
tions ensure that you’ll always
Ease of assembly
Ergonomics
The Arlink 8000 workstation
With an emphasis on ergo-
feature a unique column design
offers the industry’s fastest and
nomics, the Arlink 8000 work-
have the exact workstation
that provides a sturdy, flexible
simplest set-up and reconfigu-
station improves comfort,
your work demands. With their
backbone for your evolving
ration. Virtually no hardware or
eliminates wasted motion, and
easy reconfigurability, Arlink
needs. Thanks to the system’s
tools are required, making
minimizes fatigue and strain.
8000 workstations can be
versatility and durability, this
changes efficient and frustra-
altered for multiple functions
exceptional series of worksta-
tion-free.
and changes in your workflow.
tions pays for itself quickly,
This enduring adaptability
while providing continuous
means that you’ll have a cost-
value for years to come.
effective solution for all of your
assembly, repair and light
manufacturing workstation
The Arlink 8000 workstation
installation tool kit
needs, both today and in the
future.
PAINT COLORS – PLEASE NOTE!
• Arlink 8000 workstations
and accessories are available in Light Gray and Sand
only.
• Other colors, including
other standard Lista colors,
are available on request at
an additional charge.
• Accent trim for support
columns, lights, steel
shelves and footrests
(included with each workstation) is available in
a choice of colors – see
page 16.
Ease and flexibility when positioning system compoARLINK 8000 AND VSI ACCESSORIES
ARE NOT COMPATIBLE WITH NEXUS
SYSTEM UPRIGHTS.
14
nents are a hallmark of Arlink 8000 workstations.
Arlink® 8000 Workstation Features
Simplicity
Adaptability
®
Secure storage
Clean room certification
• Fast, easy assembly.
Unique Definite Positioning System
Hanging drawers and overhead
Arlink 8000 workstations have been
• With our starter and adder system, workstations can easily link
to create infinite layout options.
(see page 16) allows easy, secure
cabinets can be added anywhere
certified for use in a CLASS 10,000
placement and reconfiguration of
you need secure storage for valu-
clean room per the USA Federal
accessories.
able tools, equipment, parts or per-
Standard 209E and CLASS 7 per ISO
Mobility
sonal effects. Lista drawer storage
14644 International Clean Room
Mobile workstations are easily relo-
cabinets also make excellent com-
Standard. For information on speci-
cated, allowing fast layout changes.
panion cabinets – see Lista’s
fying a clean room workstation,
General Storage Catalog.
contact your Lista representative.
Optional task lighting provides
Electrostatic control
Aesthetics
illumination for the most exacting
Electrostatic control
Components are powder coated in
work.
products and accessories are avail-
attractive Light Gray or Sand (with
Strength
able to meet most ESD-related
other colors available on request),
Made of high-strength, cold rolled
requirements.
and a choice of ten trim colors for
• Workstations can be converted
from single- to double-sided at
any time – quickly, easily and
inexpensively.
Modularity
• Five standard section widths and
five standard column heights.
• Section widths can be mixed and
matched to suit your needs.
steel, the system’s columns provide
Visibility
a contemporary appearance.
maximum structural integrity.
Double-sided column
– worksurfaces and
accessories can attach
to either side
of column
Overhead lighting
Choice of column
heights
Easily-repositioned
accessories
Variety of utility
beams
Decorative accent trim
Outriggers for
stability
Adjustable
worksurfaces in
a variety of sizes
and materials
Variety of footrests
Leveling glides or
optional mobile
base
15
Arlink® 8000 Workstation System
Arlink 8000 workstations
Macro slots provide support for
Micro
slots
give the user the greatest flexibility possible. Our unique
heavy-duty components, such as
Accent trim colors
Plastic accent trim for support
worksurfaces and shelving. In the
columns, lights, steel shelves and
Definite Positioning System ,
case of adjacent workstation sec-
footrests (included with each work-
numerous footprint configura-
tions, the macro slot is utilized by
station) is available in a choice of
both to save space and reduce sys-
colors.
®
tions, and easy-to-assemble
Macro
slot
starter and adder sections,
tem cost. Components that attach
mean you can easily adapt and
to the macro slots are vertically
reconfigure your workstations
adjustable in 3" increments.
Micro slots provide support for
as your needs evolve.
Brackets fit into either micro
slots or macro slots.
Definite Positioning System®
An innovative assembly concept
lighter-duty components, such as
COLOR
Black
COLOR
Blue
COLOR
Bright Blue
COLOR
Burgundy
COLOR
Classic Blue
COLOR
Dark Blue
COLOR
Light Gray
COLOR
Royal Blue
COLOR
Sand
COLOR
Teal
power beams and parts bin rails.
Micro slots are located to the left
and right of the macro slot, and pro-
which features one macro and two
vide maximum component place-
micro slots on each side of a high
ment options. Components that
strength column, this approach
attach to the micro slots are verti-
greatly reduces the time and effort
cally adjustable in 1" increments.
needed to attach components to the
system, while making highly efficient use of space. Since columns
are double-sided, a single column
may be used by two back-to-back
workstations, as well as adjacent
sections.
16
Arlink® 8000 Workstation Configuration Options
Floor space utilization
Arlink 8000 workstations enable
Many workstation configurations may also be ordered with
Conveyor workstations
The Arlink 8000 family of con-
you to achieve maximum productiv-
mobile capabilities, enabling you to
veyor workstation systems provides
ity per square foot. Our worksta-
quickly and easily relocate entire
cost-effective, high-efficiency work-
tions can be designed in numerous
workstation groupings.
flow management throughout your
configurations to meet any applica-
Please contact your Lista repre-
entire production stream, between
tion. You can configure your work-
sentative for additional configura-
automatic machines and in opera-
stations to suit your needs today,
tion options.
tions including:
and as future needs evolve.
• Manual assembly areas
• Inspection
IN-LINE CONFIGURATION
U CONFIGURATION
• Testing
• Rework
• Packaging
IN-LINE BACK-TO-BACK CONFIGURATION
Select from Arlink 8000 workstation options to best optimize
workflow management, including
worksurfaces and accessories (task
lighting, power, air and data beams,
shelving, parts bin racks, etc.).
Systems are available with
X CONFIGURATION
single- or multi-level conveyor or
easily integrated with the conveyor
of your choice.
L CONFIGURATION
Single sided – operator faces
conveyor with standard worksurface
Double sided – operator faces conveyor with standard worksurface
Double sided – operator faces
conveyor with scalloped worksurface
Double sided – operator at 90˚
to conveyor with standard
worksurface
T CONFIGURATION
17
Easy-Order Arlink® 8000 Workstations
The workstation components
shown on this page are pre-configured to include our most popular and versatile Arlink 8000
workstation styles. To design a
custom workstation to suit your
exact needs, see pages 20-21.
Arlink 8000 workstations
consist of a starter section, and
as many adder sections as you
need for your application.
Select from single- or doublesided starters, adders, or corners
in all standard section widths
and heights. You may also
choose either 28"- or 30"-deep
worksurfaces in either plastic
laminate or static dissipative
laminate. Easy-Order sections
include all accessories shown in
the charts to the right. To order
additional accessories, please
see pages 22-28.
How to order an Easy-Order
Arlink 8000 workstation
section
Follow the 6 steps below for starter
section and repeat for each adder
section.
1. Select Easy-Order section
configuration.
A-SS
A-SA
A-SC
A-DS
A-DA
A-DC
=
=
=
=
=
=
single-sided starter
single-sided adder
single-sided corner adder
double-sided starter
double-sided adder
double-sided corner adder
2. I Select section length.*
30 = 30" long
36 = 36" long
48 = 48" long
60 = 60" long
72 = 72" long
*corner adders 36" long only
3. I Select section height.
54 = 54" high*
72 = 72" high
84 = 84" high
*54" high sections do not include
light assemblies
Single-sided starter
Includes: 1 starter assembly (see page 20)
1 footrest
2 outriggers
1 worksurface assembly
1 single-sided power beam (15 amp)
1 open wire shelf, 12" depth
1 light fixture assembly
1 parabolic light diffuser
A-SA
Single-sided adder
Includes: 1 adder assembly (see page 20)
1 footrest
1 outrigger
1 worksurface assembly
1 single-sided power beam (15 amp)
1 open wire shelf, 12" depth
1 light fixture assembly
1 parabolic light diffuser
A-SC
Single-sided corner adder
Includes: 1 adder assembly, 36"
1 outrigger
1 corner worksurface assembly
1 single-sided power beam (15 amp)
1 open wire shelf, 12" depth
1 light fixture assembly
1 parabolic light diffuser
4. I Select section depth.
28 = 28" deep
30 = 30" deep
5. I Select worksurface material.
SL = plastic laminate
SD = static dissipative plastic
laminate
6. I Select powder coat paint
color.
LG = Light Gray
SN = Sand
EXAMPLE: to order a starter singlesided workstation section that is 60"
long, 84" high and 30" deep with a
plastic laminate worksurface and Sand
paint, the part number would be
A-SS608430SLSN.
To order an adder single-sided workstation section that is 48" long, 84"
high and 30" deep with a plastic
laminate worksurface and Sand paint,
the part number would be
A-SA488430SLSN.
To order an adder single-sided corner
section that is 84" high and 30" deep
with a plastic laminate worksurface
and Sand paint, the part number would
be A-SC368430SLSN. (When ordering
an “L” shaped configuration, 2 starters
must be used with a corner adder.)
18
A-SS
A-DS
Double-sided starter
Includes: 1 starter assembly (see page 20)
2 footrests
4 outriggers
2 worksurface assemblies
1 double-sided power beam (15 amp)
2 open wire shelves, 12" depth
2 light fixture assemblies
2 parabolic light diffusers
A-DA
Double-sided adder
Includes: 1 adder assembly (see page 20)
2 footrests
2 outriggers
2 worksurface assemblies
1 double-sided power beam (15 amp)
2 open wire shelves, 12" depth
2 light fixture assemblies
2 parabolic light diffusers
A-DC
Double-sided corner adder
Includes: 1 adder assembly, 36"
2 outriggers
2 corner worksurface assemblies
1 double-sided power beam (15 amp)
2 open wire shelves, 12" depth
2 light fixture assemblies
2 parabolic light diffusers
Arlink® 8000 Workstation Worksurfaces
Static Dissipative Laminate
Worksurface Assemblies
Plastic Laminate
Worksurface Assemblies
Worksurface is constructed of 1" thick
medium density particle board covered
on top and all sides with non-glare
matte finish plastic laminate. The front
edge is contoured for comfort and chip
resistance. The under side of the worksurface is sealed with a plastic tension
sheet to prevent moisture absorption,
warping and shedding. Threaded steel
inserts facilitate easy assembly and
reconfiguration. Assembly includes
2 worksurface support brackets and
2 worksurface support beams.
Color:
• Dove gray when used with Light
Gray workstations
• Antique white when used with
Sand workstations
PART NO.
24" deep
4551
4351
4451
4651
4751
28" deep
8729
8924
8923
8620
8715
30" deep
8730
SA101
SA105
SA109
SA113
32" deep
8731
SA102
SA106
SA110
SA114
34" deep
8732
SA103
SA107
SA111
SA115
36" deep
8733
SA104
SA108
SA112
SA116
LENGTH
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
Worksurface is the same as the plastic
laminate worksurface, but with plastic
laminate that provides a controlled
path to ground for the dissipation of
static electricity. The worksurface is
provided with a grounding kit that
must be used to provide proper protection for components and personnel.
Static dissipative value for the material
is 10 6 - 10 9. Assembly includes 2 worksurface support brackets and 2 worksurface support beams.
Color:
• Dove gray when used with Light
Gray workstations
• Almond when used with Sand
workstations
PART NO.
24" deep
4551SD
4351SD
4451SD
4651SD
4751SD
28" deep
8754
8994
8992
8622
8716
30" deep
8755
SA155
SA159
SA163
SA167
32" deep
8756
SA156
SA160
SA164
SA168
34" deep
8757
SA157
SA161
SA165
SA169
36" deep
8758
SA158
SA162
SA166
SA170
LENGTH
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
Also available:
•
•
•
•
Butcher block (1 1⁄4" thick)
Phenolic resin (1" thick)
Stainless steel (1 1⁄ 8" thick)
Galvanized steel (1 1⁄ 8" thick)
Corner Worksurface
Assemblies
Construction is the same as other
worksurfaces. Length is 36" or 48".
Assembly includes required brackets.
PART NO.
WORKSURFACE L X D
Plastic laminate
4951
36" x 24"
8812
36" x 28"
SA200
36" x 30"
SA201
36" x 32"
SA202
36" x 34"
SA203
36" x 36"
8864
48" x 28"
8800
straight back 28"
8806
round back 28"
Static dissipative laminate
4951SD
36" x 24"
8814
36" x 28"
SA204
36" x 30"
SA205
36" x 32"
SA206
36" x 34"
SA207
36" x 36"
8865
48" x 28"
8802
straight back 28"
8808
round back 28"
Worksurface
Support Legs
Support legs for worksurface, adjustable from 28"
to 34" high. 8094 is for
use with corner worksurface assemblies. 8265
attaches to front support
beam of worksurface to
increase load capacity or dampen
vibration (shown to right).
PART NO.
8094
8265
Material Transfer
Worksurfaces
Material transfer worksurfaces offer a
cost-effective, efficient means of workflow management for products or pallets in assembly, repair and rework
environments.
Through the use of pop-up balls, popup pads, insert wheels, or insert rollers,
worksurfaces are customized to accommodate the transfer needs of your
product and process. Material transfer
worksurfaces are often a lower cost
alternative to conveyors and can
greatly improve the efficiency, safety
and ergonomics associated with working on and moving a product. The
unique ability to integrate Lista’s Arlink
8000 components and accessories such
as task lighting, wire and steel shelving, drawers and cabinets provides
unsurpassed flexibility.
Material transfer worksurfaces may be
integrated with all Arlink 8000 section
sizes, worksurface depths and materials. Please contact your Lista representative for help in configuring a system
and providing the solution best suited
to your requirements.
DESCRIPTION
corner worksurface leg
worksurface front support leg
Split Bay
Support
Brackets
Split bay workstation
spans 2 sections with
1 worksurface. Select worksurface
assembly equal to the length of the
combined sections. Select a split bay
bracket to join worksurface assembly
to center column.
PART NO.
8102
8115
DEPTH
28"-32"
34"-36"
19
Build-Your-Own Arlink® 8000 Workstations
Designing a custom Arlink
8000 workstation is a simple
and straightforward process.
8044
Start by selecting the structural
Choose from 5 outrigger designs:
assemblies), add outriggers,
8044
choose worksurface(s), and add
8040
needs.
In addition to the column
heights shown, columns can be
custom cut to any size you
request.
8041
3. Select outriggers
elements (starter and adder
the accessories that fulfill your
8040
1. Select starter assembly (length and
height)
The starter assembly is the first component for each workstation and includes 2 columns with outer and inner trim, and a
closed stabilizer panel. Optional open stabilizer panel may be
ordered for full access from the rear of the workstation. To
specify open stabilizer in place of closed stabilizer, add the
prefix "O" to the part number.
30"
COLUMN
HEIGHT
30"
36"
54"
72"
84"
SECTION LENGTH
36"
48"
60"
STARTER ASSEMBLY PART NUMBER
8692C30 8897C30 8896C30 8601C30
8692C36 8897C36 8896C36 8601C36
8692
8897
8896
8601
8694
8901
8900
8600
8696
8903
8902
8603
72"
8702C30
8702C36
8702
8700
8704
8041
8043
8042
for worksurfaces 28"-32" deep and shelving
20"-22" deep
heavy-duty, for worksurfaces 28"-32" deep and
shelving 20"-22" deep
for worksurfaces 34"-36" deep
for rear of single-sided applications, to increase
stability
for shelving 12"-18" deep
Order 1 outrigger for each column used (2 per column for
double-sided applications). For optional swivel footrests, see
page 27.
For Applications Using Worksurface
PART NO.
8044*
8040
8041*
8043
OUTRIGGER DEPTH
22"
23"
30"
4"
USE WITH WORKSURFACE DEPTH
28", 30", 32", swivel footrest
28", 30", 32"
34", 36", swivel footrest
28", 30", 32", 34", 36"
*slotted to accept optional swivel footrest (see page 27)
For Applications Using Shelving Only
PART NO.
8040
8042
8043
OUTRIGGER DEPTH
23"
15"
4"
USE WITH SHELF DEPTH
20", 22", 24"
12", 14", 16", 18"
12", 14", 16", 18", 20", 22", 24"
4. Select worksurface assembly
See page 19.
5. Select accessories
See pages 22-28. For optional column caps see page 31.
6. Select paint color
2. Select adder assemblies (length and
height)
The adder assembly for each adjoining section includes a single column with outer and inner trim, and a closed stabilizer
panel. Optional open stabilizer panel may be ordered for full
access from the rear of the workstation. To specify open stabilizer in place of closed stabilizer, add the prefix "O" to the
part number.
30"
COLUMN
HEIGHT
30"
36"
54"
72"
84"
20
SECTION LENGTH
36"
48"
60"
ADDER ASSEMBLY PART NUMBER
8693C30 8899C30 8898C30 8606C30
8693C36 8899C36 8898C36 8606C36
8693
8899
8898
8606
8695
8906
8905
8605
8697
8908
8904
8608
72"
8703C30
8703C36
8703
8701
8705
Choose from Light Gray (LG) or Sand (SN).
7. Select trim color
See page 16.
Build-Your-Own Mobile Arlink® 8000 Workstations
All Arlink 8000 workstation
sections can be ordered in a
mobile configuration, providing
SINGLE-SIDED STARTER
DOUBLE-SIDED STARTER
SINGLE-SIDED ADDER
for easy relocation and smooth
DOUBLE-SIDED ADDER
movement of workstations.
1. Select mobile starter base
3. Select mobile adder base
Base consists of mobile base frame, 2 swivel 4" locking casters and 2 swivel 4" non-locking casters, mobile outriggers
and all required hardware. Single-sided base is 34" deep;
double-sided base is 54" deep. Adds 7" to overall column
height. For optional swivel footrests, see page 27.
Base consists of mobile base frame, 1 swivel 4" locking casters and 1 swivel 4" non-locking caster, mobile outrigger(s)
and all required hardware. Adder bases must always be
mounted on the right-hand side of a single-sided starter base.
Adds 7" to overall column height. For optional swivel
footrests, see page 27.
SECTION LENGTH
30"
36"
48"
60"
Single-sided
8313SS
8969SS
8968SS
8668SS
Double-sided
8313DS
8967DS
8974DS
8669DS
72"
SECTION LENGTH
48"
60"
8768SS
8769DS
30"
36"
Single-sided
8313SA
8969SA
Double-sided
8313DA
8967DA
Stationary Arlink 8000 workstations can easily be retrofitted
to mobile configurations when
desired.
Designing a custom Arlink
72"
8000 mobile workstation is a
8968SA
8668SA
8768SA
8974DA
8669DA
8769DA
similar process to designing a
stationary workstation. Start by
choosing a base (either singlesided or double-sided), select
structural elements (starter and
adder assemblies), choose
worksurface(s)*, and add the
accessories that fulfill your
needs.
In addition to the column
2. Select matching starter assembly
4. Select matching adder assembly
The starter assembly includes 2 columns with outer and inner
trim and a closed stabilizer panel. Optional open stabilizer
panel may be ordered for full access from the rear of the
workstation. To specify open stabilizer in place of closed
stabilizer, add the prefix "O" to the part number.
The adder assembly for each adjoining section includes a single column with outer and inner trim and a closed stabilizer
panel. Optional open stabilizer panel may be ordered for full
access from the rear of the workstation. To specify open stabilizer in place of closed stabilizer, add the prefix "O" to the
part number.
30"
COLUMN
HEIGHT
30"
36"
54"
72"
84"
SECTION LENGTH
36"
48"
60"
72"
30"
STARTER ASSEMBLY PART NUMBER
8692C30 8897C30 8896C30 8601C30
8692C36 8897C36 8896C36 8601C36
8692
8897
8896
8601
8694
8901
8900
8600
8696
8903
8902
8603
8702C30
8702C36
8702
8700
8704
COLUMN
HEIGHT
30"
36"
54"
72"
84"
SECTION LENGTH
36"
48"
60"
ADDER ASSEMBLY PART NUMBER
8693C30 8899C30 8898C30 8606C30
8693C36 8899C36 8898C36 8606C36
8693
8899
8898
8606
8695
8906
8905
8605
8697
8908
8904
8608
heights shown, columns can be
custom cut to any size you
request.
*Maximum worksurface depth 30".
72"
8703C30
8703C36
8703
8701
8705
5. Select worksurface assembly
See page 19 (maximum depth is 30").
6. Select accessories
See pages 22-28. For optional column caps see page 31.
7. Select paint color
Choose from Light Gray (LG) or Sand (SN).
8. Select trim color
See page 16.
21
Arlink® 8000 Workstation Shelves
Open Wire Shelves
Steel Shelves
Welded steel wire shelf has chrome
plated finish. Adjusts from horizontal
to 15° and 30° inclination. Includes
front lip (can be oriented up or down).
Weight capacity 150 lbs. 12" deep.
Mounts in macro slots, adjusts vertically in 3" increments.
Sturdy steel shelf adjusts from horizontal to 15° and 30° inclination. Weight
capacity 300 lbs. Includes color trim
(color matches column trim). Mounts
in macro slots, adjusts vertically in 3"
increments.
PART NO.
8884
8927
8925
8625
8725
LENGTH
30"
36"
48"
60"
72"
Lab Style Wire Shelves
Lab style wire shelves are 9" deep
to accommodate normal-sized work
boxes and sample trays. They have
cross wire welded on underside of
shelf, so work boxes slide easily along
length of shelf when front lip is facing
up. Adjusts from horizontal to 15° and
30° inclination. Weight capacity 150
lbs. Mounts in macro slots, adjusts
vertically in 3" increments.
PART NO.
4581
4381
4481
4681
4781
LENGTH
30"
36"
48"
60"
72"
Wire Shelf
Divider
PART NO.
12" deep
8285
8321
8320
8482
8592
16" deep
8287
8341
8340
8484
8593
20" deep
8289
8361
8360
8486
8594
Variable Angle Shelves
LENGTH
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
Steel Shelf
Dividers
Mounts on shelf
with 2 screws.
8" tall.
PART NO.
8319
8339
8349
DEPTH
12"
18"
20"
Shelf divider snaps into
place. For 12" deep
open wire shelf only.
PART NO.
8145
HEIGHT
12"
Steel Shelf Lips
Shelf lip mounts to front of shelf and
can be positioned at height of either
5⁄ 8 " or 1 1⁄ 2".
PART NO.
8311
8386
8387
8448
8595
22
FOR SHELF LENGTH
30"
36"
48"
60"
72"
Sloping Document Shelves
15° vertical steel shelf is 12" high and
has a 2" lip to hold books, manuals,
drawings, etc. Mounts in micro slots,
adjusts vertically in 1" increments.
PART NO.
8298
8316
8315
8455
8590
LENGTH
30"
36"
48"
60"
72"
Worksurface Back Stops
Shelf mounts in forward or set back
position. Adjusts variably from totally
flat to 25° angle and has a full perimeter lip. 150 lb. capacity. Shelf without
lip is similar to variable angle shelf but
includes pre-punched holes to accept
vertical wire dividers (see below).
Mounts in micro slots, adjusts vertically
in 1" increments.
WITH LIP
18" deep
8312
8328
8327
8497
24" deep
8314
8355
8354
WITHOUT LIP
LENGTH
4583
4383
4483
4683
30"
36"
48"
60"
4584
4384
4484
30"
36"
48"
Steel back stop prevents items from
rolling off worksurface. 3" high.
Mounts in micro slots, adjusts vertically
in 1" increments.
PART NO.
8449
8461
8463
8466
8468
LENGTH
30"
36"
48"
60"
72"
Shelf Dividers for Variable
Angle Shelves without Lips
Divider is 1⁄4" diameter galvanized wire
that fits into pre-punched holes in the
shelf. No hardware required. Depth
must match shelf depth.
PART NO.
4168
4172
4169
4173
4170
4174
HEIGHT X DEPTH
6" x 18"
6" x 24"
10" x 18"
10" x 24"
18" x 18"
18" x 24"
Arlink® 8000 Workstation Lighting Accessories
Dual Lamp Fluorescent
Light Fixture Assemblies
Switchable 2/4 Lamp
Fluorescent Lights
Economical twin tube fluorescent light
fixture. Uses energy-saving T8 lamps
and electronic ballasts. Comes complete with (2) 32 watt lamps and parabolic diffuser. Color trim attaches to
front lip of fixture. Includes 9' power
cord. Mounts in macro slots, adjusts
vertically in 3" increments.
Switchable 2 or 4 tube fluorescent light
fixture allows user to select light intensity according to the task. Uses energy
saving T8 lamps and electronic ballasts.
Comes complete with (4) 32 watt
lamps and acrylic diffuser. Fixture tilts
up or down 10°. Includes 9' power cord.
Mounts in macro slots over worksurface, adjusts vertically in 3" increments.
• 14" depth is suited for placement
under overhead cabinets
• 19" depth is standard
• 26" depth is suited for use with
extra-deep worksurfaces
PART NO.
LENGTH
Fixture with 14" deep bracket
8511S
30"
8533S
36"
8534S
48"
8655S
60"
8784S
72"
Fixture with 19" deep bracket
8511L
30"
8533L
36"
8534L
48"
8655L
60"
8784L
72"
Fixture with 26" deep bracket
8511XL
30"
8533XL
36"
8534XL
48"
8655XL
60"
8784XL
72"
• 14" depth is suited for placement
under overhead cabinets
• 19" depth is standard
• 26" depth is suited for use with
extra-deep worksurfaces
PART NO.
LENGTH
Fixture with 14" deep bracket
4375S
36"
4475S
48"
4675S
60"
4775S
72"
Fixture with 19" deep bracket
4375L
36"
4475L
48"
4675L
60"
4775L
72"
Fixture with 26" deep bracket
4375XL
36"
4475XL
48"
4675XL
60"
4775XL
72"
Parabolic Diffusers
For 2/4 lamp lights. Optional chrome
plated plastic parabolic grid directs light
onto worksurface while eliminating
glare on adjacent workstations.
Replaces acrylic diffuser that is included
with light fixture assembly.
PART NO.
4376
4476
4676
LENGTH
36"
48"
60" and 72"
23
Arlink® 8000 Workstation Utility Accessories
Horizontal Power Beams
Available in single- or double- sided
configuration. Each side has 8 receptacles, lighted power switch and 15 amp
or 20 amp breaker (20 amp available
in single-sided only). Includes 7 1⁄ 2'
power cord. Mounts in micro slots,
adjusts vertically in 1" increments.
PART NO.
LENGTH
Single-sided 15 amp
8876
30"
8941
36"
8940
48"
8640
60"
8740
72"
Double-sided 15 amp
8877
30"
8946
36"
8945
48"
8645
60"
8741
72"
Single-sided 20 amp
8875
30"
8959
36"
8991
48"
8657
60"
8743
72"
Power Beams with Light
Switch
Available in single- or double-sided
configuration. Provided with separate
on/off switch for light, which allows
remainder of beam to be left powered.
7 outlets per side. 15 amp standard.
Includes 7 1⁄ 2' power cord. Mounts in
micro slots, adjusts vertically in 1"
increments.
PART NO.
Single-sided
8860
8937
8930
8647
8745
Double-sided
8862
8944
8931
8648
8746
LENGTH
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
Vertical Power
Strips
Available in 15 amp or
20 amp, and GFCI.
Lighted on/off switch,
6' cord with grounded
plug and circuit breaker
included. Painted black.
Mounts vertically to
front and back of micro
slots, adjusts vertically in
1" increments. Bracket and hardware
supplied.
PART NO.
8942
8943
8947
8948
DESCRIPTION
15 amp with 6 outlets
20 amp with 6 outlets
15 amp GFCI with 6 outlets
20 amp GFCI with 6 outlets
Data Beams
Air Beams
Modular data beams feature 4 duplexstyle outlets with 8 ports that accept
modular snap-in/snap-out jacks or connectors for data, video, or audio connectivity. Beams come with outlets, but
jacks/connectors must be purchased
separately. On-site wiring for ports is
responsibility of customer. Mounts in
micro slots, adjusts vertically in 1"
increments. Contact Lista for additional
specifying assistance.
Air beam is supplied with:
PART NO.
Single-sided
8858
8870
8871
8653
8752
Double-sided
8859
8872
8873
8652
8753
LENGTH
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
Mounts in micro slots, adjusts vertically
in 1" increments.
PART NO.
Single-sided
8879
8949
8950
8951
8750
Double-sided
8853
8977
8978
8660
8751
LENGTH
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
Air Supply Bracket
Cable Trays
Tray neatly gathers bundles of loose
horizontal wires and provides random
access for cable routing along its
length. Painted black. Mounts in micro
slots, adjusts vertically in 1" increments.
PART NO.
8302
8389
8390
8498
8597
LXDXH
30" x 4" x 3"
36" x 4" x 3"
48" x 4" x 3"
60" x 4" x 3"
72" x 4" x 3"
Vertical Cable Clip
Neatly gathers bundles
of loose vertical wires.
Painted black. Mounts
in micro slots, adjusts
vertically in 1" increments.
PART NO.
8391
24
• (1) 1⁄4" NPT female inlet on top
• (2) 1⁄4" NPT female outlets on front
(single-sided) and (2) 1⁄4" NPT
female outlets per side (doublesided) for 30" beams
• (3) 1⁄4" NPT female outlets on front
(single-sided) and (3) 1⁄4" NPT
female outlets per side (doublesided) for 36", 48", 60" and 72"
beams
• (2) end mounted jumpers
SIZE
3" x 3"
Supplied with (1) 1⁄4"
NPT female outlet.
Mounts under worksurface to worksurface support beam.
Single outlet.
PART NO.
4866
Arlink® 8000 Hanging Drawers, Overhead Cabinets and Panels
Pelican® Drawer
Hanging Cabinets
16 3⁄ 4" (426mm) wide x 19 1⁄ 4"(491mm) deep
These cabinets provide convenient
below-worksurface storage where only
a few drawers are needed. Cabinet is
mounted under worksurface to worksurface support beams and can be
repositioned to any horizontal position.
50 lb. (22.5kg) weight capacity per
drawer. Usable inside dimensions:
13 1⁄4" (338.5mm) wide x 16 15⁄16"
(430mm) deep. Drawers do not accept
Lista partitions and dividers.
PART NO.
8614
8619
8626
8634
8639
8658
HEIGHT
5"
8"
8"
13 15⁄16"
13 15⁄16"
19 7⁄8"
8664
19 7⁄8"
Secure storage for legal hanging files or
personal effects, plus segmented tray
for pencils, pens, paper clips etc.
Designed to allow easy clearance for
worker’s knees. Thermo-formed polystyrene body with polyurethane drawer
face. Mounts under worksurface to
worksurface support beams. Drawer
can slide to any horizontal position.
Includes concealed ball bearing slides
and fully integrated locking system.
PART NO.
8845
Overhead Cabinets
Steel cabinet with retractable locking
door. Includes mounting brackets, lock
and 2 keys. Keyed-alike or master lock
systems are available. Mounts in micro
slots, adjusts vertically in 1" increments.
PART NO.
8297
8956
8955
8650
8760
LXDXH
30" x 15" x 16"
36" x 15" x 16"
48" x 15" x 16"
60" x 15" x 16"
72" x 15" x 16"
WXDXH
19 1⁄ 2" x 24" x 10"
DRAWERS
(1) 2 3⁄4"
(1) 5 3⁄4"
(2) 2 3⁄4"
(1) file*
(2) 5 3⁄4"
(1) 5 3⁄4" +
(1) file*
(3) 5 3⁄4"
Pegboard Panels
*file drawer includes file hangers
Tote Box
Slides into tote box holder which
mounts under worksurface, and can
slide to any horizontal position. Comes
with tote box holder and hangers.
PART NO.
8998
WXDXH
11" x 17" x 6"
Sturdy painted steel pegboard panel,
ideal for hanging tools, etc. 18" high.
Mounts in micro slots, adjusts vertically
in 1" increments.
PART NO.
8333
8334
8335
8336
8337
LENGTH
30"
36"
48"
60"
72"
Modesty Panels
Steel or fabric-covered modesty panel
acts as a privacy screen between double-sided assemblies (or single-sided
where required). Steel panels can be
used as fill-in panel or magnet panel to
hold instructions or drawings. Fabriccovered modesty panel acts as tackboard and sound dampener. Standard
fabric color is gray. Other colors available upon request. Mounts in micro
slots, adjusts vertically in 1" increments.
PART NO.
LENGTH
10" steel panel
8137
30"
8032
36"
8030
48"
8452
60"
8581
72"
20" steel panel
8138
30"
8033
36"
8031
48"
8453
60"
8582
72"
20" fabric-covered panel
8139
30"
8036
36"
8048
48"
8462
60"
8586
72"
For companion stationary and
mobile drawer storage cabinets,
see pages 61-64 and 67-70, or
Reversible
Markerboard/Tackboards
Lista’s General Storage Catalog.
Louvered Panels
Sturdy painted steel louvered panel,
holds hanging plastic bin boxes, tool or
supply holders. 18" high. Mounts in
micro slots, adjusts vertically in 1"
increments.
PART NO.
8442
8443
8444
8445
8447
LENGTH
30"
36"
48"
60"
72"
Two-sided reversible board. Features
white magnetic markerboard on 1 side
and gray fabric tackboard on the other.
Also functions as privacy panel and
sound dampener. 30" high. Mounts
in micro slots, adjusts vertically in
1" increments.
PART NO.
8771
8772
8773
LENGTH
30"
36"
48"
25
Arlink® 8000 Workstation Storage and Tool Accessories
Utility Bins
Light-Duty Parts Bin Rails
Light duty parts bin rail is ideal for
smaller / lighter components and where
space efficiency is a priority. Three
depths provide for compact tiered
placement and allow access to all bins
without interference. Chrome finish.
Mounts in micro slots, adjusts vertically
in 1" increments. (Bins not included –
see page 28.)
PART NO.
2" deep
8293
8243
8240
8478
8575
4" deep
8294
8244
8241
8479
8576
6" deep
8295
8245
8242
8480
8577
Full length steel bin holds tools, bottles,
wipes, reeled solder dispenser, etc.
Front edge can be used as a parts bin
rail. Mounts in micro slots, adjusts vertically in 1" increments.
PART NO.
8299
8247
8246
8446
8578
LXDXH
30" x 4" x 2"
36" x 4" x 2"
48" x 4" x 2"
60" x 4" x 2"
72" x 4" x 2"
LENGTH
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
30"
36"
48"
60"
72"
Lockable Tool Boxes
Full length steel tool box securely
stores tools and other valuables. Comes
with lock and key. Mounts in micro
slots, adjusts vertically in 1" increments.
PART NO.
8300
8205
8204
8464
8587
LXDXH
30" x 4" x 2"
36" x 4" x 2"
48" x 4" x 2"
60" x 4" x 2"
72" x 4" x 2"
Tool Glide Track and
Trolley Assemblies
Tool and
Accessory Holders
Tool and accessory holders add convenience to the workplace. They hang on
parts bin rail or utility bin and can be
positioned for easy reach.
PART NO.
8277
8276
8281
DESCRIPTION
tool holder
solder spool holder
bottle holder
8275
Kim Wipe holder
SIZE
3" x 5"
5" x 5"
3" inside
diameter
5" x 5"
Airgun Holder
Mounts to worksurface support beam.
1 1⁄ 2" x 1 1⁄ 2" with
1" diameter hole.
PART NO.
4863
Wire holder
Wire guide
Wire Holder Assemblies
Heavy-Duty Parts Bin Rails
Heavy duty parts bin rail holds heavier
items such as hardware, fittings, etc.
and is easily adjustable for ergonomic
access. It can be mounted parallel to
the worksurface or at a 15° angle.
Mounts in micro slots, adjusts vertically
in 1" increments. (Bins not included –
see page 28.)
PART NO.
8223
8225
8226
8475
8546
LENGTH
30"
36"
48"
60"
72"
Assembly includes support brackets
(pair) and wire holder – 3⁄4" tube with
threaded inserts. Mounts in micro slots,
adjusts vertically in 1" increments.
PART NO.
8886
8928
8929
8685
8785
Wire Guides
Chrome plated bar with several holes,
guides wire on the job without tangling
or de-railing. Mounts in micro slots,
adjusts vertically in 1" increments.
PART NO.
8301
8274
8273
8471
8583
26
LENGTH
30"
36"
48"
60"
72"
LENGTH
30"
36"
48"
60"
72"
Smooth-moving glide keeps electric
and pneumatic tools properly positioned. If used in conjunction with fluorescent light assembly, glide track
mounts on brackets for fluorescent
lights. If used alone, mounting brackets
must be ordered separately (see below).
PART NO.
LENGTH
8958
30"
8975
36"
8976
48"
8633
60"
8728
72"
Additional tool trolley
8184
Track Mounting Brackets
Used to mount tool track when a light
fixture assembly is not used or needed.
Come in pairs.
PART NO.
8199
8196
8182
DEPTH
14"
19"
26"
Arlink® 8000 Workstation ESD Products and Miscellaneous Accessories
Wrist Strap and Ground
Block
Mounts
under worksurface to
worksurface
or support
beams. Dual
receptacles
for 2 wrist
straps.
PART NO.
SC12
SC15
CPU Holder
Allows CPU to be
mounted under
worksurface (off of
floor). Mounts
under worksurface
to worksurface
support beams.
PART NO.
8440
DESCRIPTION
ground block
wrist strap with 6' coil cord*
* with 1 megohm resistor
Swivel Footrests
WXDXH
9 1⁄ 2" x 18" x 20"
Drops into slots on 8044 and 8041
slotted outriggers. Adjustable to suit
worker at individual workstation.
Includes color trim.
PART NO.
8885
8911
8910
8610
8710
LENGTH
30"
36"
48"
60"
72"
Ground Kits
Kit is supplied with all static dissipative
worksurfaces or shelves. Includes attaching hardware.
PART NO.
8909
8909SD
PART NO.
SC10
SC30
DESCRIPTION
worksurface kit with 8' cord*
shelf kit with 6' cord**
LXW
21" x 10"
Freestanding Footrests
Ergonomic footrest provides support
for user’s feet. Height adjustable from
3" - 12". Footrest platform is 15" deep
x 21 3⁄4" wide, and adjusts from totally
flat to a 25° angle. Includes ribbed mat.
PART NO.
SC14
Tiltable keyboard holder allows computer keyboard to be stored under
worksurface when not in use. Includes
swivel pull-out mouse pad which can
be attached to either right or left side.
PART NO.
8451
Common Point Ground
Block
Two connection
sides – one side
connects to a
1 megohm resistor, the other
side bypasses the resistor and connects
directly to ground. Includes 8' cord.
Keyboard Holder with
Mouse Tray
DESCRIPTION
not static dissipative
includes ground snap for static
dissipative environments
* with 1 megohm resistor
** without 1 megohm resistor
27
Arlink® 8000 Workstation Pivoting Accessories
Micro Slot
Universal
Mounting
Bracket
Bracket is welded steel.
Mounts in micro slots,
adjusts vertically in 1"
increments. For attaching articulating arm to column. Must
be ordered separately.
PART NO.
8406
FOR ARTICULATING ARMS
8410, 8409
Heavy-Duty
Universal
Mounting
Bracket
Equipment Shelves
Monitor Shelves with
Keyboard Holder
Holds computer monitor. Includes
retractable wire keyboard holder. 75 lb.
capacity. Requires universal mounting
bracket (not included).
PART NO.
8878
8838
FOR ARTICULATING ARMS
8410, 8409
For easy access to small tools, instruments, parts, etc. 21 1⁄4" wide x 7 3⁄8"
deep. 75 lb. capacity. Requires universal mounting bracket (not included).
Ribbed mat optional.
Optional Mouse Tray
PART NO.
8895
Flat Panel Monitor Arms
For attaching flat panel monitor to
upright. 17 1⁄ 2 lb. capacity. Mounts in
macro slots, adjusts vertically in 3"
increments. Includes mounting bracket.
Two 8" tubular steel arms, linked
together to provide an additional
articulation point. 50 lb. capacity.
Can mount left or right, adjusts vertically in 3" increments. Included with
accessories as shown. Does not include
mounting bracket.
PART NO.
8409
28
FOR MOUNTING BRACKETS
8406, 8423
PART NO.
8887
8765
8759
DESCRIPTION
accessory shelf
with double articulating arm
ribbed rubber mat
Bin Container
FOR MOUNTING BRACKETS
8406, 8423
Double Articulating Arm
For displaying papers, plans, etc.
Includes lip for pencils, pens, etc.
Requires universal mounting bracket
(not included).
PART NO.
8666
8776
DESCRIPTION
11 7⁄8" wide x 13 3⁄4" high
with double articulating arm
• 8415 swings left and right, and has
2 articulating points.
• 8628 also includes a 9" extender
which allows positioning of monitor
screen away from adjacent accessories.
PART NO.
8415
8628
Large Document Holders
For displaying large documents, and
open binders and books. Includes lip for
pencils, pens, etc. Requires universal
mounting bracket (not included).
PART NO.
8670
8786
DESCRIPTION
23 5⁄8" wide x 13 3⁄4" high
with double articulating arm
DESCRIPTION
9 1⁄ 2" wide x 7 5⁄8" deep
Tubular steel arm is 18" overall length.
Weight capacity is 75 lbs. Can mount
left or right, adjusts vertically in 3"
increments. Included with accessories.
Does not include mounting bracket.
PART NO.
8410
DESCRIPTION
12 3⁄8" wide x 12 3⁄8" deep
with double articulating arm
Document Holders
Accessory Shelves
Mouse tray attaches to monitor shelf
with keyboard holder (above) to hold
computer mouse and/or mouse pad.
Ordered separately.
Articulating Arm
PART NO.
8857
8839
DESCRIPTION
12 3⁄8" wide x 12 3⁄8" deep
with double articulating arm
Bracket is welded
steel. Bolts on
through column and
adjusts vertically in
3" increments. For attaching articulating arm to column. Must be ordered
separately.
PART NO.
8423
Holds a variety of customer-supplied
equipment or tools. 75 lb. capacity.
Requires universal mounting bracket
(not included).
DESCRIPTION
attaches to column
includes 9" bracket extender
Holds 3 rows of plastic bins for easy
access to parts and components (bins
not included – see chart to right).
Interior space per shelf is 20" wide x
6" deep. Top shelf is 3 1⁄4" high, second and third shelves are 3 3⁄4" high.
50 lb. capacity. Requires accessory shelf
(above) for support (not included), or
can be used freestanding. Requires universal mounting bracket (not included).
PART NO.
8888
Task Light Bracket
Sturdy welded
steel bracket
mounts in micro
slot with 1⁄ 2"
diameter hole for task light.
PART NO.
8130
8132
LENGTH
9"
15"
Parts Bin Rack
Holds industry-standard plastic parts
bins (not included – see below).
Requires universal mounting bracket
and 8410 or 8409 swing arm (not
included).
PART NO.
8432
DESCRIPTION
18" wide x 10" high
Parts Bin Boxes
Blue plastic bin fits in
rack or on rail and
slides to position.
Conductive bin is black.
PART NO.
Non-conductive
8253
8254
8255
Conductive
8252
8250
8251
DIMENSIONS
4 1⁄ 2" W x 4" D x 3" H
5 1⁄ 2" W x 4" D x 3" H
7 1⁄ 2" W x 4" D x 3" H
4 1⁄ 2" W x 4" D x 3" H
5 1⁄ 2" W x 4" D x 3" H
7 1⁄ 2" W x 4" D x 3" H
Arlink® 8000 Flow Racks
Arlink 8000 Flow Rack
Shelf Accessories
Shelves are slotted on 1 1⁄ 2" increments to accept roller tracks and
guides. Guides separate sections.
Rollers are 11⁄16" wide; tracks are
1" wide. Two rollers are recommended
for rows up to 15" wide, and 3 or more
for wider rows.
Arlink 8000 Flow Rack
Shelf Assemblies
Shelf assembly includes roller tracks and
guides as shown. 3" high, 48" deep.
600 lb. weight capacity. For additional
roller tracks and guides, see chart to
right.
Arlink 8000 Flow Racks
Arlink 8000 flow racks sections are
available in 4 standard widths from
30" to 60". Flow racks are height
adjustable in 1" increments. The flow
rack angle is adjustable. 1400 lb.
weight capacity.
Arlink 8000 Flow Rack
Starter Assemblies
Consists of 2 starter assemblies, 2 outriggers, 1 flow rack shelf assembly and
4 connectors.
PART NO.
72" high
FRS3072
FRS3672
FRS4872
FRS6072
84" high
FRS3084
FRS3684
FRS4884
FRS6084
PART NO.
FR30
FR36
FR48
FR60
WIDTH
30"
36"
48"
60"
INCLUDES
4 roller tracks, 1 guide
4 roller tracks, 1 guide
6 roller tracks, 2 guides
6 roller tracks, 2 guides
PART NO.
FRTR
FRGU
FRCP
DESCRIPTION
roller track
roller guide
replacement clip
Flow racks can be used to
stage and deliver parts utilizing
gravity, reducing material handling time and costs. Bins or
totes are loaded on flow rack
frames from the rear, and as
operators remove one from the
front, a new bin glides forward
on rollers. Similarly, flow rack
frames can be inclined away
from an operator to allow
removal of completed work.
Flow racks are constructed utilizing the same Starter and Adder
system common to all Arlink 8000
workstations. Worksurface
assemblies and accessories as
shown in this catalog can be
added to create a complete parts
presentation and integrated
workstation system. Ball transfer
SIZE
tables, other material handling
30" wide x 48" deep
36" wide x 48" deep
48" wide x 48" deep
60" wide x 48" deep
worksurfaces (see page 19) or
30" wide x 48" deep
36" wide x 48" deep
48" wide x 48" deep
60" wide x 48" deep
conveyors (see page 17) may also
be integrated into the worksurface as needed. Flow racks can be
made mobile by the addition of
caster sets.
Arlink 8000 Flow Rack
Adder Assemblies
Flow rack sections may be
Consists of 1 adder assembly, 1 outrigger, 1 flow rack shelf assembly and
2 connectors.
joined side by side, using Starter
PART NO.
72" high
FRA3072
FRA3672
FRA4872
FRA6072
84" high
FRA3084
FRA3684
FRA4884
FRA6084
any overall length and combina-
SIZE
30" wide x 48" deep
36" wide x 48" deep
48" wide x 48" deep
60" wide x 48" deep
and Adder assemblies to achieve
tion of section sizes.
30" wide x 48" deep
36" wide x 48" deep
48" wide x 48" deep
60" wide x 48" deep
29
Arlink® 8000 Progressive Assembly Systems, Utility and Parts Carts
Progressive Assembly System
Utility and Parts Carts
Designed for transportation
Single- or double-sided
of circuit boards or other panel-
modular carts can be configured
ized items, not to exceed 15"
wide and 3⁄8" thick. Two versions are available.
with any combination of shelves,
Shelf Mount Progressive
Assembly Systems
Consists of 2 aluminum slide rails,
2 channel rails, 2 joiner pins and
1 chrome plated part trough. Shelves
must be ordered separately (see
page 22).
PART NO.
36" wide shelf
8936-20
8936-22
48" wide shelf
8935-20
8935-22
60" wide shelf
8637-20
SHELF DEPTH
20"
22"
20"
22"
20"
Bench Tops for Progressive
Assembly System
Consists of 2 steel end supports (left
and right), 2 channel rails, 1 stiffener
panel, 2 aluminum slide rails and
2 joiner pins. Base footprint size
36" wide x 20" deep.
PART NO.
8979
8980
8690
LENGTH
36"
48"
60"
Progressive Assembly
System Accessories
Further customize your system.
Additional Side Rails
PART NO.
8379
8380
8476
SECTION LENGTH
36"
48"
60"
Parts Bin Rail Supports (pair)
For bench top progressive assembly
system.
PART NO.
8505
30
SECTION LENGTH
24"
parts bins, utility bins, etc. to
meet your exact needs. All are
constructed using Lista’s standard Arlink 8000 column to
allow complete interchangeability of components with workstations.
For accessories for utility and
parts carts, see pages 22-28.
Utility and Parts Carts
54" high carts feature 2 wheel-locking
and 2 non-locking casters, 3 1⁄ 2" diameter. Wheels are rubber, non-marking.
Accepts:
• Shelves (page 22) – maximum shelf
depth for parts cart is 14"
• Pegboard, louvered, reversible and
modesty panels (page 25)
• Bin rails (page 26)
• Power, air and data beams
(page 24)
• Pivoting accessories (page 28)
PART NO.
Single-sided
8326SS
8915SS
8964SS
Double-sided
8326DS
8915DS
8964DS
SECTION LENGTH
30"
36"
48"
30"
36"
48"
VSI (Vertical Space Integrator) Accessory System
Surface Mount
PART NO.
Starter assembly
8352
8826
8855
8672
8793
Adder assembly
8353
8828
8856
8673
The VSI (Vertical Space
SECTION WIDTH*
30"
36"
48"
60"
72"
30"
36"
48"
60"
* must be a minimum of 6" shorter than
worksurface width
VSI uprights and accessories
mount onto any workbench
worksurface to provide a complete accessory system. VSI
uprights’ double-sided columns
allow uprights and accessories to
be shared between two benches
(see below).
VSI (Vertical Space
Integrator) Accessory
System
Features sturdy 45" high, 1 1⁄4" wide,
4" deep, roll-formed steel columns that
fasten to the bench top and are stabilized by a modesty panel. Starter
assembly includes 2 columns, 4 trim
strips, 1 modesty panel, and mounting
hardware. Adder assembly includes
1 mounting column, 2 trim strips,
1 modesty panel and mounting hardware.
Trim strip color can be chosen from the
chart on page 16. Foot plate for surface
mount uprights is 5" x 3". Surface
mount VSI System width must be a
minimum of 6" shorter than worksurface width. Rear mount VSI System can
be full width of Align workstation
worksurface.
For VSI system accessories, see pages
22-28.
Rear Mount
Integrator) System is designed
to expand the efficiency of:
• Align® adjustable height
workstations
• Lista technical electronic
workstations
• Lista industrial workbenches
• Retrofit to existing workbenches
You can create highly produc-
For Align® workstations only (see
pages 35-36).
tive and efficient work centers
by adding above-worksurface
work aids such as task lighting,
PART NO.
Starter assembly
ADJ-VSI-830S
ADJ-VSI-836S
ADJ-VSI-848S
ADJ-VSI-860S
ADJ-VSI-872S
Adder assembly
ADJ-VSI-830A
ADJ-VSI-836A
ADJ-VSI-848A
SECTION WIDTH*
30"
36"
48"
60"
72"
30"
36"
48"
* section width must be equal to or less than
Align worksurface width
Column Cap
Optional gray plastic cap to finish off
top of column. Order 1 per column used.
PART NO.
8004
WXD
1 1⁄ 2" x 4"
storage shelves, power beams,
parts bin rails, etc.
With the VSI System, you’re
able to utilize the Arlink 8000
system’s wide range of shelving
and accessory options that easily
attach to the vertical column
without the need for tools, using
the micro and macro slots on
both sides of the upright columns
(see page 16 for detailed
descriptions).
The VSI System is easily
installed by in-house personnel
and can be utilized as a single
unit on a stand-alone bench, or
linked together using our
starter/adder system. VSI
columns are double-sided, and
one VSI may service two
benches when benches are
positioned back-to-back.
31
Lista Align® Adjustable Height Workstations
Cirtronics, a contract electronic
manufacturer, uses Align
Adjustable Height Workstations
throughout its 80,000 sq. ft.
facility. Align workstations are
used for assembly, inspection,
machining and a variety of other
functions. Their ergonomic
advantages have kept Cirtronics
coming back for more Align
workstations over the years.
Lista’s Align® Adjustable
with the operator in mind. It
Height Workstations bring the
reduces fatigue, stress and
user an unsurpassed level of
potential injury. The work-
ergonomic comfort, flexible
station is ideally suited for
functionality and enhanced
repairing, testing, and assem-
productivity.
bling mechanical and electronic
products and components.
Innovative features include:
With an adjustable height
ranging from 27" to 42" (not
including worksurface), this
workspace solution is designed
• Proven, tested technology
with thousands of units in
use in the field
• Universal platform, which
can be adjusted via motor,
hand crank or manually
adjusted without a lift mechanism (slide leg base)
• Center- and rear-justified
options available
• Precision drive system for
maintenance-free reliability
• Built-in cable/hose management duct and modesty
panel
• Available for 30", 48", 60",
72" and 90" length worksurfaces, and 24", 30", 36" and
48" depth worksurfaces
• Load capacity 1000 lbs.
dynamic for motorized base
and 500 lbs. dynamic for
hand crank base
All uprights and components
move in relation to
worksurface height
Available with the full range of
Nexus System accessories
(see pages 76-83)
Wide choice of
worksurface materials
Three-position memory switch in
motorized base makes height
adjustment nearly automatic
Available with either
leveling glides or optional casters
(see page 36)
33
Easy-Order Align® Adjustable Height Workstations
Model ALE workstations include an
Align rear-justified motorized base.
Model ALC workstations include an
Align rear-justified crank base.
See page 36 for hanging cabinet
descriptions.
Workstations with
Worksurface
Workstations with
Adjustable Riser Shelf
To add Easy-Order Nexus System configuration to workstations with worksurface shown below, see pages 84-85.
Includes:
Includes:
• worksurface back stop
• adjustable riser shelf with back stop
• (2) 16" instrument riser supports
(1 with power)
• 12" deep instrument riser shelf
• worksurface and shelf back stops
How to order an Easy-Order
Align Adjustable Height
Workstation
Workstations with
Instrument Riser Shelf
I
I
I
I
I
I
1. Select Easy-Order workstation
configuration.
2. I Select worksurface style.
See page 42 for worksurface
descriptions.
PLB = Plastic laminate
BTB = Butcher block
SDB = Static dissipative (includes
ground cord and hardware)
All worksurfaces have a bullnose
front edge and are 30" deep.
PART NO.
ALE/R5000- III
I
ALC/R5000- III
I
DESCRIPTION
motorized
hand crank
PART NO.
ALE/R5001- III
I
ALC/R5001- III
I
DESCRIPTION
motorized
hand crank
PART NO.
ALE/R5002- III
I
ALC/R5002- III
I
DESCRIPTION
motorized
hand crank
3. I Select worksurface size.
6030 = 60" long x 30" deep
7230 = 72" long x 30" deep
I
I
I
I
I
I
4. I Select paint color. Add 2-letter
paint code shown in color chart on
back cover.
5. I Select lock type for models
with hanging cabinet.
RG = individual
KA = keyed-alike
MA = master
EXAMPLE: to order an ALE/R5201
workstation with a 72" long plastic
laminate worksurface and shelf and
Classic Blue paint, with an individual
lock for the hanging cabinet, the part
number would be ALE/R5201PLB7230CB, with a WBHC450-2-RG
hanging cabinet.
PART NO.
ALE/R5100- III
I
ALC/R5100- III
I
PART NO.
ALE/R5101- III
I
ALC/R5101- III
I
INCLUDES
WBHC150-1-I
hanging cabinet
WBHC150-1-I
hanging cabinet
PART NO.
ALE/R5102- III
I
ALC/R5102- III
I
INCLUDES
WBHC150-1-I
hanging cabinet
WBHC150-1-I
hanging cabinet
I
I
I
I
I
I
PART NO.
ALE/R5200- III
I
ALC/R5200- III
I
34
INCLUDES
WBHC150-1-I
hanging cabinet
WBHC150-1-I
hanging cabinet
INCLUDES
WBHC450-2-I
hanging cabinet
WBHC450-2-I
hanging cabinet
PART NO.
ALE/R5201- III
I
ALC/R5201- III
I
INCLUDES
WBHC450-2-I
hanging cabinet
WBHC450-2-I
hanging cabinet
PART NO.
ALE/R5202- III
I
ALC/R5202- III
I
INCLUDES
WBHC450-2-I
hanging cabinet
WBHC450-2-I
hanging cabinet
Align® Adjustable Height Workstation Operator-Adjustable Bases
MOTORIZED BASE REAR-JUSTIFIED
WITH OPTIONAL CASTERS
HAND CRANK BASE CENTER-JUSTIFIED
Motorized Bases
Hand Crank Bases
Features a low-EMS, low-voltage dual
actuator controller for synchronized leg
movement and stressless operation.
Three height positions can be preset
with the programmable switch. Static
and dynamic load capacity is 1,000 lbs.
Height range (floor to top of base, not
including worksurface) is 27"- 42".
Worksurface not included – see
page 42 for worksurface choices.
Some assembly required.
Hand crank static load capacity is 1,000
lbs., dynamic load capacity is 500 lbs.
Height range (floor to top of base, not
including worksurface) is 27"- 42".
Worksurface not included – see
page 42 for worksurface choices.
Some assembly required.
Motorized Bases, Rear-Justified
PART NO.
24" deep
ALE/R3024
ALE/R4824
ALE/R6024
ALE/R7224
ALE/R9024
30" deep
ALE/R3030
ALE/R4830
ALE/R6030
ALE/R7230
ALE/R9030
36" deep
ALE/R3036
ALE/R4836
ALE/R6036
ALE/R7236
ALE/R9036
BASE
WIDTH
WORKSURFACE
LENGTH (MIN.)
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
Hand Crank Bases,
Center-Justified
Hand Crank Bases,
Rear-Justified
PART NO.
Motorized Bases,
Center-Justified
PART NO.
30" deep
ALE/C3030
ALE/C4830
ALE/C6030
ALE/C7230
ALE/C9030
36" deep
ALE/C3036
ALE/C4836
ALE/C6036
ALE/C7236
ALE/C9036
48" deep
ALE/C6048
ALE/C7248
ALE/C9048
BASE
WIDTH
WORKSURFACE
LENGTH (MIN.)
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
59"
71"
89"
60"
72"
90"
24" deep
ALC/R3024
ALC/R4824
ALC/R6024
ALC/R7224
ALC/R9024
30" deep
ALC/R3030
ALC/R4830
ALC/R6030
ALC/R7230
ALC/R9030
36" deep
ALC/R3036
ALC/R4836
ALC/R6036
ALC/R7236
ALC/R9036
BASE
WIDTH
WORKSURFACE
LENGTH (MIN.)
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
PART NO.
30" deep
ALC/C3030
ALC/C4830
ALC/C6030
ALC/C7230
ALC/C9030
36" deep
ALC/C3036
ALC/C4836
ALC/C6036
ALC/C7236
ALC/C9036
48" deep
ALC/C6048
ALC/C7248
ALC/C9048
BASE
WIDTH
WORKSURFACE
LENGTH (MIN.)
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
29"
47"
59"
71"
89"
30"
48"
60"
72"
90"
59"
71"
89"
60"
72"
90"
35
Align® Adjustable Height Workstation Slide Leg Bases, Accessories
Casters
Casters can be added to any adjustable
height base to allow mobility. Caster is
5" diameter, increases overall height 6".
325 lb. capacity per caster.
SLIDE LEG BASE CENTER-JUSTIFIED
PART NO.
AL/CAST5X1
DESCRIPTION
5" caster set, (2) swivel,
(2) swivel-with-wheel-lock
CAST5X1S-NB (1) swivel 5" caster
CAST5X1S-WB (1) swivel-with-wheel-lock
5" caster
Slide Leg Bases
Worksurface height is repositioned by
sliding leg up or down to desired height
and setting a pin. Static load capacity is
1,000 lbs. Height range (floor to top of
base, not including worksurface) is
27"- 42". Worksurface not included
– see page 42 for worksurface
choices. Assembly required.
Slide Leg Bases, Rear-Justified
PART NO.
24" deep
ALS/R3024
ALS/R4824
ALS/R6024
ALS/R7224
ALS/R9024
30" deep
ALS/R3030
ALS/R4830
ALS/R6030
ALS/R7230
ALS/R9030
36" deep
ALS/R3036
ALS/R4836
ALS/R6036
ALS/R7236
ALS/R9036
BASE
WIDTH
WORKSURFACE
LENGTH (MIN.)
28"
46"
58"
70"
87 1⁄ 2"
30"
48"
60"
72"
90"
28"
46"
58"
70"
87 1⁄ 2"
30"
48"
60"
72"
90"
28"
46"
58"
70"
87 1⁄ 2"
30"
48"
60"
72"
90"
Workstation Hanging
Cabinets
16 3⁄ 4" (426mm) wide x 19 1⁄ 4"(491mm) deep
Cabinet is suspended from the worksurface. 50 lb. (22.5kg) weight capacity
per drawer. Usable inside dimensions:
13 1⁄4" (338.5mm) wide x 16 15⁄16"
(430mm) deep. Drawers do not accept
Lista partitions and dividers.
For Align workstations only: Not
available for center-justified or 24"
deep rear-justified Align workstations.
Cabinet can not be positioned at same
end of bench as keypad or hand crank.
Slide Leg Bases,
Center-Justified
PART NO.
30" deep
ALS/C3030
ALS/C4830
ALS/C6030
ALS/C7230
ALS/C9030
36" deep
ALS/C3036
ALS/C4836
ALS/C6036
ALS/C7236
ALS/C9036
48" deep
ALS/C6048
ALS/C7248
ALS/C9048
BASE
WIDTH
WORKSURFACE
LENGTH (MIN.)
28"
46"
58"
70"
87 1⁄ 2"
30"
48"
60"
72"
90"
28"
46"
58"
70"
87 1⁄ 2"
30"
48"
60"
72"
90"
58"
70"
87 1⁄ 2"
60"
72"
90"
Offset Caster Assembly
Offset caster assemblies do not increase
the overall height range of the base.
Welded frame replaces standard feet.
Includes pair of offset frames with
(2) 5" swivel casters and (2) 5" swivelwith-wheel-lock casters. Rear casters
extend 4" beyond back of worksurface.
Painted to match base. For motorized
and hand crank bases only.
PART NO.
AL/CAST5X1-OF
DESCRIPTION
pair of frames
PART NO.
WBHC075-1-II
I
WBHC150-1-II
I
WBHC150-2-II
I
WBHC300-1-II
I
WBHC300-2-II
I
WBHC450-2-II
I
WBHC450-3-II
I
HEIGHT DRAWERS
5"
(1) 2 3⁄4"
8"
(1) 5 3⁄4"
8"
(2) 2 3⁄4"
13 15⁄16" (1) file*
13 15⁄16" (2) 5 3⁄4"
19 7⁄8" (1) 5 3⁄4" +
(1) file*
19 7⁄8" (3) 5 3⁄4"
*file drawer includes file hangers
How to order a hanging
cabinet
1. Select cabinet.
2. I Select lock type.*
NL
KA
RG
MA
=
=
=
=
none
keyed-alike
individual
master
3. I Select paint color. For color
chart, see back cover.
*units ordered without lock can not have
lock installed at a later date
36
Align® Adjustable Height Workstation Accessories
Align Bottom Shelves
Provides open storage beneath worksurface. 16" deep. Accepts vertical
wire dividers (see below). 150 lb.
(68kg) capacity. For motorized and
hand crank bases only.
PART NO.
ALBS/F-4816
ALBS/F-6016
ALBS/F-7216
ALBS/F-9016
LENGTH
48"
60"
72"
90"
Vertical Wire Dividers for
Bottom Shelves
Align Attached Footrest
Ergonomic footrest attaches over Align
base stringer. Height adjustable from
3"-12 1⁄4" (plus height of stringer).
Footrest platform is 15" deep x 21 3⁄4"
wide, and adjusts from totally flat to a
25° angle. Ribbed mat included. Not
usable for 30" wide Align workstations.
PART NO.
AL/AFR
15" deep dividers are 1⁄4" diameter
galvanized wire that fit into prepunched holes in the 16" deep shelf.
No hardware required.
PART NO.
NXS/WD150-15
NXS/WD250-15
NXS/WD450-15
CPU Holder
Freestanding Footrest
Mounts to underside of worksurface. 9 1⁄ 2" wide
x 18" deep x 20"
high. Painted to
match workstation.
Ergonomic footrest provides support for
user’s feet. Height adjustable from
3"-12 1⁄4". Footrest platform is 15"
deep x 21 3⁄4" wide, and adjusts from
totally flat to a 25° angle. Ribbed mat
included.
PART NO.
WB/FFR
For use with Align® rear-justified
adjustable height bases only.
Starter frames consist of 2 upright
posts, a horizontal rail, brackets and
hardware. Adder sets consist of an
additional upright, a horizontal rail and
a bracket. Frames are sturdy, heavy
gauge steel, and are notched front and
back at 1" increments for mounting
accessories. Uprights are available in
heights of 30" and 48" (height =
height above top of base), and widths
of 24", 30", 36", 42", 48" and 60".
Specify color from chart on back cover.
Allows use of the full width of an Align
rear-justified adjustable height workstation for support of a Nexus system.
The total width of the extended
rear-mount frame must equal the
width of the Align workstation.
Extended rear-mount frame is the
starter set; use the standard rearmount adder (on facing page) for
adder unit. Not for use with Align
workstations that are placed flush
side-to-side. Specify color from chart
on back cover.
PART NO.
SEC. WIDTH CENT.-TO-CENT.
Starter set
NXF/RM2430
24"
NXF/RM3030
30"
NXF/RM3630
36"
NXF/RM4230
42"
NXF/RM4830
48"
NXF/RM6030
60"
Adder set
NXF/RM2430A
24"
NXF/RM3030A
30"
NXF/RM3630A
36"
NXF/RM4230A
42"
NXF/RM4830A
48"
NXF/RM6030A
60"
* upright overall height is 48"
48" High* Rear-Mount Frames
For companion stationary and
mobile drawer storage cabinets,
see pages 62-64 and 68-70, or
Lista’s General Storage Catalog.
Keyboard Holder
Tiltable keyboard holder allows computer keyboard to be stored under
worksurface when not in use. Includes
swivel pull-out mouse pad which can
be attached to either right or left side.
PART NO.
WB/KBH
For use with Align® rear-justified
adjustable height bases only.
30" High* Rear-Mount Frames
HEIGHT
6"
10"
18"
PART NO.
CPU/H
Nexus Rear-Mount Frames
Nexus Extended RearMount Frames
PART NO.
SEC. WIDTH CENT.-TO-CENT.
Starter set
NXF/RM2448
24"
NXF/RM3048
30"
NXF/RM3648
36"
NXF/RM4248
42"
NXF/RM4848
48"
NXF/RM6048
60"
Adder set
NXF/RM2448A
24"
NXF/RM3048A
30"
NXF/RM3648A
36"
NXF/RM4248A
42"
NXF/RM4848A
48"
NXF/RM6048A
60"
30" High* Extended RearMount Frames
PART NO.
NXF/RM2430-EXT
NXF/RM3030-EXT
NXF/RM3630-EXT
NXF/RM4230-EXT
NXF/RM4830-EXT
NXF/RM6030-EXT
WIDTH
24"
30"
36"
42"
48"
60"
* upright overall height is 48"
48" High* Extended RearMount Frames
PART NO.
NXF/RM2448-EXT
NXF/RM3048-EXT
NXF/RM3648-EXT
NXF/RM4248-EXT
NXF/RM4848-EXT
NXF/RM6048-EXT
WIDTH
24"
30"
36"
42"
48"
60"
* upright overall height is 60"
Nexus System Accessories
For the full range of Nexus system
accessories, see pages 77-83. For
Easy-Order Nexus combinations, see
page 85.
* upright overall height is 60"
LXW
21" x 10"
37
Lista Technical Electronic Workstations
Arizona State University’s
Architecture Department has
equipped a number of its student
work areas with versatile Lista
technical electronic workstations.
The workstations’ attractive
design, wealth of available
accessories and configurability
have made them a popular solution with both students and staff.
Featuring a sleek, aestheti-
Many configurations feature
Technical electronic work-
cally pleasing design, the real
a built-in electrical power sup-
stations have a 1,000 lb.
beauty of Lista’s technical elec-
ply, conveniently located on
(454kg) weight capacity, and
tronic workstations is their abil-
either an instrument riser or as
can be configured with a vari-
ity to perfectly suit the widest
a part of the Nexus accessory
ety of leg and cabinet pedestal
variety of applications.
system (for more on the Nexus
choices, including mobile bases
system, see pages 76-85).
for increased flexibility and
Our modular approach is the
ease of reconfiguration. Mobile
key to our technical electronic
Choose from a wide array of
workstation’s versatility, with
static-safe components, includ-
workstations can be quickly
flexible standard components
ing ESD paint, worksurfaces
moved to and from a work site.
and accessory options both
and shelves, conductive plastic
above and below the worksur-
boxes and grounding acces-
face, leading to greater produc-
sories.
tivity and efficiency.
Wide choice of above-worksurface accessories
Access to electrical power available on instrument risers and
Nexus Accessory System
Durable worksurfaces come in
multiple lengths and depths, in a
choice of materials, including ESD
Front and rear top support rails
protect integrity of worksurface
Choice of pedestal and leg supports, including Tech Leg, Tech
Panel Leg and a large selection of
cabinet pedestals
Choice of leveling glides or
mobile casters (for 4-leg
configurations)
39
Easy-Order Technical Electronic Workstations
Easy-Order technical electronic workstations include Narrow Width (16 7⁄ 8"
wide) cabinet pedestals (see page 61
for descriptions). Customer-specified
cabinet pedestals (shown in gray) must
be ordered separately – for Easy-Order
cabinet pedestals, see pages 62-63 for
Narrow Width cabinets and pages 6869 for MP Width cabinets. For more
information on overhead cabinets, see
Lista’s General Storage Catalog.
How to order an Easy-Order
Technical Electronic
Workstation
1. Select Easy-Order workstation
configuration.
Workstations with 2 Tech
Legs
Workstations with 2 Tech
Legs and 1 Drawer
Workstations with 1 Tech
Leg and 1 Cabinet
Overall bench height including work
surface is 35 1⁄4". Includes:
• 2 tech panel legs (legs 33 1⁄ 2" high)
• 1 pair of top support rails
• 1 stringer
Overall bench height including work
surface is 35 1⁄4". Includes:
• 2 tech panel legs (legs 33 1⁄ 2" high)
• 1 pair of top support rails
• 1 stringer
• 1 WBHC150-1 hanging cabinet
Overall bench height including work
surface is 35 1⁄4". Includes:
• 1 tech panel leg (leg 33 1⁄ 2" high)
• 1 pair of top support rails
• 1 stringer
• 1 NW0600-0402NA-F6RG cabinet
PART NO.
TB3000-III
I
PART NO.
TB3100-III
I
PART NO.
TB3200-III
I
PART NO.
INCLUDES
TB3001III
I 12" adj. riser shelf w/back stop
workstation back stop
PART NO.
INCLUDES
TB3101-III
I 12" adj. riser shelf w/back stop
workstation back stop
PART NO.
INCLUDES
TB3201-III
I 12" adj. riser shelf w/back stop
workstation back stop
2. I Select worksurface style. See
page 42 for descriptions.
PLB = Plastic laminate
BTB = Butcher block
SDB = Static dissipative (includes
ground cord and hardware)
All worksurfaces have a bullnose front edge and are 30"
deep.
3. I Select worksurface size.
4830 = 48" long x 30" deep
6030 = 60" long x 30" deep
7230 = 72" long x 30" deep
4. I Select paint color. For color
chart, see back cover or below.
EXAMPLE: to order a TB3201 workstation with a 72" long plastic laminate worksurface and shelf and Bright
Blue paint, the part number would be
TB3201-PLB7230BB.
5. Select cabinet pedestals (for
TB03xx and TB06xx configurations).
For Easy-Order cabinet pedestals,
see pages 62-63 for Narrow Width
cabinets and pages 68-69 for MP
Width cabinets.
EXAMPLE (CUSTOMER-SPECIFIED
CABINETS): to order a TB0300 workstation with a 72" long plastic laminate worksurface, and an
NW0750-0601NA cabinet pedestal
with Bright Blue paint, the
workstation part number would be
TB0300-PLB7230BB, and the
cabinet part number would be
NW0750-0601NA-NBRGBB.
40
I
I
I
I
I
I
PART NO.
INCLUDES
TB3002-III
I (2) 16" instrument riser
supports (1 with power)
12" deep instru. riser shelf
worksta. + shelf back stops
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I
I
I
I
I
I
PART NO.
INCLUDES
TB3102-III
I (2) 16" instrument riser
supports (1 with power)
12" deep instru. riser shelf
worksta. + shelf back stops
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I
I
I
I
I
I
PART NO.
INCLUDES
TB3202-III
I (2) 16" instrument riser
supports (1 with power)
12" deep instru. riser shelf
worksta. + shelf back stops
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PART NO.
INCLUDES
TB3003-III
I 15" deep station. riser shelf
with louvered back panel
(2) 16" high overhead cabs
with retractable doors*
PART NO.
INCLUDES
TB3103-III
I 15" deep station. riser shelf
with louvered back panel
(2) 16" high overhead cabs
with retractable doors*
PART NO.
INCLUDES
TB3203-III
I 15" deep station. riser shelf
with louvered back panel
(2) 16" high overhead cabs
with retractable doors*
*48" long benches include (1) overhead cabinet
*48" long benches include (1) overhead cabinet
*48" long benches include (1) overhead cabinet
I BE (Beige paint) I BB (Bright Blue paint) I BK (Black paint) I CB (Classic Blue paint) I GR (Dark Gray paint)
Workstations with 1 Leg,
1 Customer-Specified Cab.
Workstations with 2 Cabinets
Overall bench height including work
surface is 35 1⁄4". Includes:
• 1 tech panel leg (leg 33 1⁄ 2" high)
• 1 pair of top support rails
• 1 stringer
• cabinet pedestal chosen by customer
Overall bench height including work
surface is 35 1⁄4". Includes:
• 1 NW0600-0402NA-F6KA cabinet*
• 1 NW0600-0202NA-F6KA cabinet*
*includes keyed-alike locks
Overall bench height including work
surface is 35 1⁄4". Includes:
• 1 NW0600-0501NA-F6KA cabinet*
• 1 NW0600-0201N-F6KA cabinet*
*includes keyed-alike locks
Overall bench height including work
surface is 35 1⁄4". Includes:
• 2 cabinet pedestals chosen by
customer
PART NO.
TB0300-III
I
PART NO.
TB3400-III
I
PART NO.
TB3500-III
I
PART NO.
TB0600III
I
PART NO.
INCLUDES
TB0301-III
I 12" adj. riser shelf w/back stop
workstation back stop
PART NO.
INCLUDES
TB3401-III
I 12" adj. riser shelf w/back stop
workstation back stop
PART NO.
INCLUDES
TB3501-III
I 12" adj. riser shelf w/back stop
workstation back stop
PART NO.
INCLUDES
TB0601-III
I 12" adj. riser shelf w/back stop
workstation back stop
I
I
I
I
I
I
PART NO.
INCLUDES
TB0302-III
I (2) 16" instrument riser
supports (1 with power)
12" deep instru. riser shelf
worksta. + shelf back stops
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Workstations with
2 Customer-Specified
Cabinets
I
I
I
I
I
I
PART NO.
INCLUDES
TB3402-III
I (2) 16" instrument riser
supports (1 with power)
12" deep instru. riser shelf
worksta. + shelf back stops
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I
I
I
I
I
I
PART NO.
INCLUDES
TB3502-III
I (2) 16" instrument riser
supports (1 with power)
12" deep instru. riser shelf
worksta. + shelf back stops
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I
I
I
I
I
I
PART NO.
INCLUDES
TB0602-III
I (2) 16" instrument riser
supports (1 with power)
12" deep instru. riser shelf
worksta. + shelf back stops
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PART NO.
INCLUDES
TB0303-III
I 15" deep station. riser shelf
with louvered back panel
(2) 16" high overhead cabs
with retractable doors*
PART NO.
INCLUDES
TB3403-III
I 15" deep station. riser shelf
with louvered back panel
(2) 16" high overhead cabs
with retractable doors*
PART NO.
INCLUDES
TB3503-III
I 15" deep station. riser shelf
with louvered back panel
(2) 16" high overhead cabs
with retractable doors*
PART NO.
INCLUDES
TB0603III
I 15" deep station. riser shelf
with louvered back panel
(2) 16" high overhead cabs
with retractable doors*
*48" long benches include (1) overhead cabinet
*48" long benches include (1) overhead cabinet
*48" long benches include (1) overhead cabinet
*48" long benches include (1) overhead cabinet
I GG (Green paint) I LG (Light Gray paint) I NR (Red paint) I SN (Sand paint) I FW (White paint)
41
Technical Electronic and Align® Workstation Worksurfaces
Lista worksurfaces are all
easy to maintain, rugged, and
durable.
Worksurfaces come in 48",
60", 72", 84", 90" and 96"
lengths, and are 24", 30" or 36"
deep, depending on worksurface. Other sizes are available,
and certain worksurfaces are
available with a bullnose front
edge.
Plastic Laminate
Particle board core with plastic laminated top and sides. 1 9⁄16" thick. Dove
gray is standard but other colors are
available on request. Available in
standard square edge or bullnose front
edge (shown above). To order a bullnose edge, add “BN” to the end of the
part number.
PART NO.
24" deep
PTOP-4824
PTOP-6024
PTOP-7224
PTOP-8424*
PTOP-9024*
PTOP-9624*
30" deep
PTOP-48
PTOP-60
PTOP-72
PTOP-84*
PTOP-90*
PTOP-96*
36" deep
PTOP-4836
PTOP-6036
PTOP-7236
PTOP-8436*
PTOP-9036*
PTOP-9636*
LENGTH
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
*requires additional support (third leg or hat
section stiffener)
Phenolic Resin
Ball Transfer Worksurfaces
Ball transfer worksurfaces offer a cost
effective, efficient means of workflow
management for products or pallets in
an assembly, repair or rework environment. Please contact your Lista representative for help in configuring a
system and providing the solution best
suited to your requirements.
A high-pressure laminate designed for
laboratory worksurfaces. Resistant to
chemicals, stains or discoloration.
Worksurface is 1" thick phenolic resin,
available in black.
PART NO.
RTOP-48
RTOP-60
RTOP-72*
RTOP-84*
RTOP-90*
RTOP-96*
SIZE
48" long x 30" deep
60" long x 30" deep
72" long x 30" deep
84" long x 30" deep
90" long x 30" deep
96" long x 30" deep
*requires additional support (third leg or hat
section stiffener)
Static Dissipative Plastic
Laminate
Particle board core with plastic laminated top and sides, 1 9⁄16" thick.
Grounding bolt and 10' grounding cord
with a 1 megohm resistor included.
Standard color is dove gray but other
colors available on request. Available in
standard square edge or bullnose front
edge (shown above). To order a bullnose edge, add “BN” to end of part
number.
Worksurfaces display electrical properties within static dissipative boundaries
of 10 6 -10 9 ohms over a wide range of
relative humidities (ranging from 60%
RH to as low as 10% RH) to meet ESD
specifications. Meets EOS/ESD S4.1
specifications. For detailed specifications, please contact Lista.
PART NO.
24" deep
SDTOP-4824
SDTOP-6024
SDTOP-7224
SDTOP-8424*
SDTOP-9024*
SDTOP-9624*
30" deep
SDTOP-48
SDTOP-60
SDTOP-72
SDTOP-84*
SDTOP-90*
SDTOP-96*
36" deep
SDTOP-4836
SDTOP-6036
SDTOP-7236
SDTOP-8436*
SDTOP-9036*
SDTOP-9636*
LENGTH
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
*requires additional support (third leg or hat
section stiffener)
Butcher Block
Satin finish 1 3⁄4" thick hardwood.
Available in standard square edge or
bullnose front edge (shown above). To
order a bullnose edge, add “BN” to the
end of the part number.
PART NO.
24" deep
BTOP-4824
BTOP-6024
BTOP-7224
BTOP-8424
BTOP-9024
BTOP-9624
30" deep
BTOP-48
BTOP-60
BTOP-72
BTOP-84
BTOP-90
BTOP-96
36" deep
BTOP-4836
BTOP-6036
BTOP-7236
BTOP-8436
BTOP-9036
BTOP-9636
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
Static Dissipative
Worksurface Accessories
ESD Isolation Kits
Required to prevent a redundant
ground (ground loop) with cabinet/
worksurface grounding system.
Necessary when powered items are
used with either non-ESD painted
Nexus accessories, ESD painted
Nexus accessories with static dissipative worksurfaces, or powered instrument riser shelves on static
dissipative worksurfaces.
PART NO.
ESDISO-KIT/IRSS
DESCRIPTION
instrument riser
shelf isolation kit
Worksurface Grounding Kit
Kit is supplied with all static dissipative worksurfaces.
PART NO.
GCT
42
LENGTH
DESCRIPTION
8' cord w/1 megohm resistor
Technical Electronic Workstation Below-Worksurface Components
Tech Legs
2" x 2" tube leg pair
with cross piece. Legs
include glides for leveling on uneven surfaces. Top support
rails are required
for all workstation
configurations
which include Tech
Leg(s) (not included).
PART NO.
WORKSURFACE DEPTH
27 1⁄2" (700mm) high
WBTL27.5X22.5
24" (610mm)
WBTL27.5X28.5
30" (762mm)
WBTL27.5X34.5
36" (915mm)
33 1⁄2" (850mm) high
WBTL33.5X22.5
24" (610mm)
WBTL33.5X28.5
30" (762mm)
WBTL33.5X34.5
36" (915mm)
Tech Panel Legs
Same basic construction as the Tech Leg
with a formed panel
welded in place.
Includes leveling
glides. Top support
rails are required for
all workstation configurations which
include Tech Panel Leg(s) (not
included).
PART NO.
WORKSURFACE DEPTH
27 1⁄2" (700mm) high
WBTL /P27.5X22.5 24" (610mm)
WBTL /P27.5X28.5 30" (762mm)
WBTL /P27.5X34.5 36" (915mm)
33 1⁄2" (850mm) high
WBTL /P33.5X22.5 24" (610mm)
WBTL /P33.5X28.5 30" (762mm)
WBTL /P33.5X34.5 36" (915mm)
Pair of extenders is
used to add additional height adjustment for stationary
Tech Legs and Tech
Panel Legs. Adds up
to 6" in height in 1" increments.
Extender accepts glides for leveling
and/or additional height adjustment.
PART NO.
WBTL / EXT6
DESCRIPTION
pair
Pair of casters used
to add mobility to
Tech Legs and Tech Panel Legs. Swivel
stem casters are 5" x 1 1⁄4" and replace
glides which come with stationary legs.
Tech Legs with mobile casters can not
be paired with a cabinet pedestal.
DESCRIPTION
pair, with wheel brake
pair, w/o wheel brake
Stringers/Foot Rests
Telescoping heavy gauge U channel with
2 mounting holes on each end plate.
PART NO.
WBLST48/ II
WBLST60/ II
WBLST72/ II
WBLST84/ II
WBLST90/ II
WBLST96/ II
WORKSURF. LENGTH
48"
60"
72"
84"
90"
96"
Privacy Panels
Steel panel attaches to leg or cabinet
and runs full length of worksurface.
22 3⁄4" high.
PART NO.
WBLPP22.8X48
WBLPP22.8X60
WBLPP22.8X72
WBLPP22.8X84
WBLPP22.8X90
WBLPP22.8X96
WORKSURF. LENGTH
48"
60"
72"
84"
90"
96"
Top Support Rails
Pair of rails support front and back of
worksurface to protect integrity of top.
Required for all technical electronic
workstations with at least one leg.
Not for use with workstations with
2 cabinet pedestals. Comes as pair.
PART NO.
WBTSC48/ II
WBTSC60/ II
WBTSC72/ II
WBTSC84/ II
WORKSURF. LENGTH
48"
60"
72"
84"
How to order top support
rails
1. Select part number based on
worksurface length.
2. I Specify left-hand (facing the
workstation) bench support.
TL = Tech Leg or Panel Leg
NW* = NW cabinet
MP* = MP cabinet
3. I Specify right-hand (facing
the workstation) bench support.
Tech Leg
Mobile
Casters
PART NO.
WBTL/CAST5WB
WBTL/CAST5NB
Tech Leg
Extenders
TL = Tech Leg or Panel Leg
NW* = NW cabinet
MP* = MP cabinet
EXAMPLE: to order a pair of top
support rails for a workstation with
a 72" worksurface, an MP Width
cabinet as the left-hand pedestal
and a Tech Leg as the right-hand
support, the part number would be
WBTSC72/MPTL.
*top support rail not used to support
worksurface of workstations with
2 cabinet pedestals
Bottom Shelves
Telescoping heavy gauge steel shelf,
12" deep, for use as storage or foot rest.
150 lb. weight capacity for evenly distributed loads, except as noted.
PART NO.
WBLBS48/ II
WBLBS60/ II
WBLBS72/ II
WBLBS84/ II
WBLBS90/ II *
WBLBS96/ II *
WORKSURF. LENGTH
48"
60"
72"
84"
90"
96"
*100 lb. weight capacity
How to order stringers and
bottom shelves
1. Select part number based on
worksurface length.
2. I Specify left-hand (facing the
workstation) bench support.
Wrist Strap
and Ground
Block
Mounts to underside of worksurface.
Dual receptacles for
2 wrist straps.
PART NO.
GB
WS
DESCRIPTION
ground block
wrist strap with 6' coil cord*
* with 1 megohm resistor
Ground Kits
Kit is supplied with all static dissipative
worksurfaces or shelves. Includes attaching hardware.
PART NO.
GCT
GCS
DESCRIPTION
worksurface kit with 8' cord*
shelf kit with 6' cord**
* with 1 megohm resistor
** without 1 megohm resistor
TL = Tech Leg or Panel Leg
NW = NW cabinet
MP = MP cabinet
3. I Specify right-hand (facing
the workstation) bench support.
TL = Tech Leg or Panel Leg
NW = NW cabinet
MP = MP cabinet
EXAMPLE: to order a bottom shelf
for a workstation with a 72" worksurface, an MP Width cabinet as the
left-hand pedestal and a Tech Leg as
the right-hand support, the part
number would be WBLBS72/MPTL.
Cabinet Pedestals
For a selection of drawer cabinets
to serve as pedestals for technical
electronic workstations, see pages
60-69.
43
Technical Electronic Workstation Above-Worksurface Accessories
Back Stops and End Stops
Steel back stops and end stops have
rounded corners. Stops extend approximately 3" above the worksurface. For
use with worksurfaces or shelves.
Back Stops
PART NO.
WBTBS-48
WBTBS-60
WBTBS-72
WBTBS-84
WBTBS-90
WBTBS-96
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
End Stops (pair)
PART NO.
WBTES-22
WBTES-28
WBTES-34
WORKSURFACE DEPTH
24"
30"
36"
Riser Shelves
Instrument Riser Shelf
Supports
Either 16", 20" or 24" high, with
removable side panels. 20" and 24"
models provide extra space to run air
lines or meet additional power requirements. Ordered individually. Shelves
ordered separately (see right). See
page 42 for isolation kits when used
with static dissipative worksurfaces.
16" High Supports
PART NO.
IRSS16
IRSS16/15
IRSS16/20
IRSS16/GF-15
IRSS16/GF-20
DESCRIPTION
no power
with 15 amp
with 20 amp
with 15 amp GFCI
with 20 amp GFCI
Lista recommends using a third center
support with 84", 90" and 96" shelves
Adjustable Riser Shelf
Assemblies
Shelves measure 1 1⁄4" thick x 12" deep.
Shelf height can be adjusted in 1 1⁄ 2"
increments from 12"-18". A steel back
stop is available for the shelf assembly
(ordered separately – see above).
Includes the number of adjustable support brackets shown in the charts.
Assemblies with Plastic
Laminate Shelf
PART NO.
ARS48P
ARS60P
ARS72P
ARS84P
ARS90P
ARS96P
WKSURF. LGTH.
48"
60"
72"
84"
90"
96"
# SUPPORTS
2
2
2
3
3
3
20" High Supports
PART NO.
IRSS20
IRSS20/15
IRSS20/20
IRSS20/GF-15
IRSS20/GF-20
DESCRIPTION
no power
with 15 amp
with 20 amp
with 15 amp GFCI
with 20 amp GFCI
Lista recommends using a third center
support with 84", 90" and 96" shelves
24" High Supports
PART NO.
IRSS24
IRSS24/15
IRSS24/20
IRSS24/GF-15
IRSS24/GF-20
DESCRIPTION
no power
with 15 amp
with 20 amp
with 15 amp GFCI
with 20 amp GFCI
Lista recommends using a third center
support with 84", 90" and 96" shelves
Assemblies w/Butcher Block Shelf
PART NO.
ARS48B
ARS60B
ARS72B
ARS84B
ARS90B
ARS96B
WKSURF. LGTH.
48"
60"
72"
84"
90"
96"
# SUPPORTS
2
2
2
2
3
3
Adjustable Support Bracket
Bracket supports riser shelf. May be
required to supplement the supports
included with shelf assemblies (see
charts above) for support of long
shelves or shelves carrying heavy loads.
44
PART NO.
ARS-BR
Overhead Cabinets
For a selection of overhead cabinets
for additional storage above instrument riser shelves, see our General
Storage Catalog.
All shelves measure 1 1⁄4" thick x 12"
or 15" deep and mount to shelf supports. Add “12” or “15” in place of the
green box ( I ) in the part number to
specify a shelf depth of 12" or 15".
Back stops for shelves can be ordered
from the chart to left.
Plastic Laminate Shelves
PART NO.
PS48 I
PS60 I
PS72 I *
PS84 I **
PS90 I **
PS96 I **
LENGTH
48"
60"
72"
84"
90"
96"
*Lista recommends using a back stop or
third center support with 72" shelves
**Lista recommends using a third center
support with 84", 90" and 96" shelves
Static Dissipative Plastic
Laminate Shelves
Comes with grounding bolt and
grounding cord. See page 42 for static
dissipative specifications.
PART NO.
SD48 I
SD60 I
SD72 I *
SD84 I **
SD90 I **
SD96 I **
LENGTH
48"
60"
72"
84"
90"
96"
*Lista recommends using a back stop or
third center support with 72" shelves
**Lista recommends using a third center
support with 84", 90" and 96" shelves
Butcher Block Shelves
PART NO.
BS48 I
BS60 I
BS72 I
BS84 I *
BS90 I *
BS96 I *
LENGTH
48"
60"
72"
84"
90"
96"
*Lista recommends using a third center
support with 84", 90" and 96" shelves
Above-worksurface accessories
using the Nexus System are
shown on pages 76-85.
Instrument Riser Shelf
Rear Panels
Full rear panel extends from worksurface to form back panel between the
worksurface and riser shelf. Available
flush with the shelf or with a 2" back
stop for the riser shelf.
PART NO.
Flush with shelf
IRS-FRP II
IRS-FRP II -P
IRS-FRP II -L
With 2" back stop
IRS-FRP II -2
IRS-FRP II -2P
IRS-FRP II -2L
DESCRIPTION
solid rear panel
pegboard rear panel
louvered rear panel
solid rear panel
pegboard rear panel
louvered rear panel
How to order a rear panel
1. Select part number.
2. I Specify shelf length.
48
60
72
84
90
96
=
=
=
=
=
=
48" long
60" long
72" long
84" long
90" long
96" long
3. I Specify shelf support
height.
16 = 16" high
20 = 20" high
24 = 24" high
EXAMPLE: to order a pegboard
rear panel for a 60" long shelf with
16" shelf supports, the part number
is IRS-FRP6016-P.
How to Order Technical Electronic Workstation Custom Configurations
These are the basic steps
3
required for ordering custom
3
I
I
I
I
I
3
3
technical electronic workstations.
TO ORDER AN EASY-ORDER
COMBINATION (WORKSTATION WITH PRECONFIGURED ACCESSORIES), SEE
PAGES 40-41.
1
2
2
2
2
1 Select worksurface
Select the worksurface that best suits
your needs from the choices on page
42. Choose the worksurface length,
depth and style that you prefer.
2 Select below-worksurface accessories or bases
Select either 2-leg,1-leg-with-cabinet or
2-cabinet configuration. Legs, stringers,
bottom shelves and privacy panels are
shown on page 43. Hanging cabinets
are shown on page 36. To select a cabinet pedestal(s), please see pages 60-69.
3 Select aboveworksurface
accessories
Select the back stop and end
stops (page 44), shelves (instrument riser or adjustable – see
page 44) and/or Nexus System
components (pages 76-85) that
suit your needs.
4 Select colors
Select a color from the chart on the
back cover. Cabinet housing and
drawer fronts can be different colors,
but drawer interiors are always gray.
tation Order
Sample Works
QTY.
1
PART NO.
PTOP-60BN
DESCRIPTION
e worksurface
plastic laminat
ge 60" x 30"
with bullnose ed
Tech Leg
1
2
2
8.5
WBTL33.5X2
ringer
st
2
W
(pair)
WBLST60TLN
1
p support rails
to
2
W
pedestal
WBTSC60TLN
1
Order cabinet
yas
E
BB
3
2N-F6RG
ck stop
NW0600-040
1
workstation ba
3
r support
WBTBS-60
1
instrument rise
3
r support
IRSS20
1
instrument rise
3
IRSS20/15
e riser shelf
1
plastic laminat
3
PS6012
op
st
1
ck
ba
f
el
sh
4
t
WBTBS-60
in
pa
1
ue
bl
ht
ig
br
BB
1
45
Lista Industrial Workbenches
Rugged Lista industrial workbenches stand up to the demands
of the harshest environments. At
General Hydrogen, a Lista bench
with galvanized steel worksurface
is used as a welding station. The
double width cabinet pedestal
allows the storage of welding
rods in adjacent drawers.
RUGGED, DURABLE WORKSPACE SOLUTIONS
TO SUIT ANY ENVIRONMENT
Lista Industrial Workbenches
Industrial Workbench Features
Industrial Workbench Examples
48
50
Industrial Workbench Easy-Order Combinations
52
Industrial Workbench Easy-Order Mobile Combinations
Industrial Workbench Worksurfaces
54
56
Industrial Workbench Under-Worksurface Legs and Accessories
Industrial Workbench Above-Worksurface Accessories
57
58
How to Order Industrial Workbench Custom Configurations
59
47
Lista Industrial Workbench Features
Rugged. Durable. Built to han-
standard components and
dle the harshest work environ-
can be cost-effectively custom
ments. Lista’s industrial
configured to meet the specific
workbenches feature flexible
needs of your application.
Feature: Wide choice of above-worksurface accessories
Create task-specific configurations
Benefit: Greater productivity and efficiency
Feature: Variety of worksurfaces
Durable tops come in a variety of sizes
Benefit: Worksurface always appropriate to application
Feature: Removable lock core
Locks can be replaced in the field
Benefit: Greater security, easy replacement
Feature: Ergonomic handles
When drawers are closed, handles are flush with housing so nothing
protrudes. Drawer handles are located at top of drawer.
Benefit: Improves safety, appearance and ergonomics
Feature: Customizable drawer compartments
A wide variety of drawer accessories for maximum
partitioning flexibility
Benefit: Better organization, faster retrieval
Feature: Choice of pedestal sizes and styles
Wide variety of workbench support options
Benefit: Customized to your needs
Feature: Heavy-duty welded leg
One-piece leg with bottom hole for leveling glides
Benefit: Provides support for heavy-duty applications
Feature: Mobility
Cabinets and legs are available
with casters
Benefit: Work areas can
easily be reconfigured,
components can be moved to
and from the work site
48
49
Lista Industrial Workbenches Make Any Workspace Work
Lista’s rugged industrial workbench systems and their large
variety of accessories can be
configured to suit almost any
application or working environment.
Sets of workbenches make maximum use of the available space in
this machine tool room at the
Mercedes-Benz Training Center.
At Landmark Aviation, corporate jets are
Mobile industrial workbenches
repaired and maintained at durable Lista work-
can be moved right to the point
benches with the Nexus Accessory System.
of use, even in a crowded, busy
Cabinet pedestals with plenty of drawers
machine shop.
provide storage for parts and tools, and the
companion mobile cabinet allows additional
storage with the convenience of mobility.
50
Heavy-duty Lista industrial workbenches combine with Lista
stacked cabinets to create an
organized, efficient workspace
that stands up to the challenges
of this marine emergency
response company.
Sturdy industrial workbenches at
the Con Edison Corporate
Learning Center have rugged galvanized steel worksurfaces for
extra durability. Specialized testing equipment and heavy-duty
components on the worksurfaces
enhance this durable, ergonomic
workspace.
A wide range of Lista workbenches brings Toyota Racing
Development up to speed in a
host of different departments.
An industrial workbench provides a rock-solid platform for
this inspection station.
51
Easy-Order Industrial Workbenches
Easy-Order workbenches include MP
Width (22 3⁄16" wide) cabinet pedestals
(see page 67 for description). Customerspecified cabinet pedestals (shown in
gray) must be ordered separately – for
Easy-Order cabinet pedestals, see
pages 62-63 for Narrow Width cabinets and pages 68-69 for MP Width
cabinets.
Workbenches with 2 Lista
Legs
Workbenches with 2 Lista
Legs and 1 Drawer
Workbenches with 1 Lista
Leg and 1 Cabinet
Overall bench height including worksurface is 35 1⁄4". Includes:
Overall bench height including worksurface is 35 1⁄4". Includes:
Overall bench height including worksurface is 35 1⁄4". Includes:
• 2 Lista Legs (legs are 33 1⁄2" high)
• 1 stringer
• 2 Lista Legs (legs are 33 1⁄2" high)
• 1 stringer
• 1 WBHC150-1 hanging cabinet
• 1 Lista Leg (leg is 33 1⁄2" high)
• 1 stringer
• 1 MP0600-0402NA-F6RG cabinet
PART NO.
WB1000-III
I
PART NO.
WB1100-III
I
PART NO.
WB1200-III
I
PART NO.
INCLUDES
WB1001-III
I back stop and end stops
PART NO.
INCLUDES
WB1101-III
I back stop and end stops
PART NO.
INCLUDES
WB1201-III
I back stop and end stops
PART NO.
INCLUDES
WB1002-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB1102-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB1202-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB1003-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
PART NO.
INCLUDES
WB1103-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
PART NO.
INCLUDES
WB1203-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
How to order an Easy-Order
Industrial Workbench
1. Select Easy-Order workbench
configuration.
2. I Select worksurface style. See
page 56 for descriptions.
LTS =
GLS =
PLS =
BTS =
Lista Top
Galvanized steel
Plastic laminate
Butcher block
All worksurfaces have a standard square edge and are 30"
deep.
3. I Select worksurface size.
4830 = 48" long x 30" deep
6030 = 60" long x 30" deep
7230 = 72" long x 30" deep
4. I Select paint color. For color
chart, see back cover or below.
EXAMPLE: to order a WB1201 workbench with a 72" long plastic laminate
worksurface and Bright Blue paint, the
part number would be
WB1201-PLS7230BB.
5. Select cabinet pedestals (for
WB03xx and WB06xx configurations). For Easy-Order cabinet
pedestals, see pages 62-63 for
Narrow Width cabinets and pages
68-69 for MP Width cabinets.
EXAMPLE (CUSTOMER-SPECIFIED
CABINETS): to order a WB0300 workbench with a 72" long plastic laminate
worksurface, and an MP0750-0601NA
cabinet pedestal with Bright Blue
paint, the workbench part number
would be WB0300-PLS7230BB, and
the cabinet part number would be
MP0750-0601NA-NBRGBB.
52
I BE (Beige paint) I BB (Bright Blue paint) I BK (Black paint) I CB (Classic Blue paint) I GR (Dark Gray paint)
Workbenches with 1 Leg
and 1 Customer-Specified
Cabinet
Workbenches with 2 Cabinets
Workbenches with
2 Customer-Specified
Cabinets
Overall bench height including worksurface is 35 1⁄4". Includes:
Overall bench height including worksurface is 35 1⁄4". Includes:
• 1 MP0600-0402NA-F6KA cabinet*
• 1 MP0600-0202NA-F6KA cabinet*
*includes keyed-alike locks
• 1 MP0600-0501NA-F6KA cabinet*
• 1 MP0600-0204D-F6KA cabinet*
*includes keyed-alike locks
• 2 cabinet pedestals chosen by
customer
PART NO.
WB0300-III
I
PART NO.
WB1400-III
I
PART NO.
WB1500-III
I
PART NO.
WB0600-III
I
PART NO.
INCLUDES
WB0301-III
I back stop and end stops
PART NO.
INCLUDES
WB1401-III
I back stop and end stops
PART NO.
INCLUDES
WB1501-III
I back stop and end stops
PART NO.
INCLUDES
WB0601-III
I back stop and end stops
PART NO.
INCLUDES
WB0302-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB1402-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB1502-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB0602-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB0303-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
PART NO.
INCLUDES
WB1403-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
PART NO.
INCLUDES
WB1503-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
PART NO.
INCLUDES
WB0603-III
I 12" adjustable riser shelf
w/ back stop
workbench back stop and
end stops
Overall bench height including worksurface is 35 1⁄4". Includes:
• 1 Lista Leg (leg is 33 1⁄2" high)
• 1 stringer
• cabinet pedestal chosen by customer
I GG (Green paint) I LG (Light Gray paint) I NR (Red paint) I SN (Sand paint) I FW (White paint)
Overall bench height including worksurface is 35 1⁄4". Includes:
53
Easy-Order Industrial Mobile Workbenches
Easy-Order mobile workbenches
include MP Width (22 3⁄16" wide) cabinet pedestal (see page 68 for description). They include 2 fixed and 2 swivel
6" x 2" casters with wheel locks.
How to order an Easy-Order
Industrial Mobile Workbench
Mobile Workbenches with
2 Lista Mobile Legs
Mobile Workbenches with
2 Mobile Legs and 1 Drawer
Mobile Workbenches with
1 Mobile Leg and 1 Cabinet
Overall bench height including worksurface is 35 1⁄4". Includes:
Overall bench height including worksurface is 35 1⁄4". Includes:
Overall bench height including worksurface is 37 1⁄4". Includes:
• 2 Lista Mobile Legs (legs are 33 1⁄2"
high)
• 1 stringer
• 2 Lista Mobile Legs (legs are 33 1⁄2"
high)
• 1 stringer
• 1 WBHC150-1 hanging cabinet
• 1 Lista Mobile Leg (leg is 35 1⁄2"
high)
• 1 stringer
• 1 MP0600-0402NA cabinet
PART NO.
WB2000-III
I
PART NO.
WB2100-III
I
PART NO.
WB2200-III
I
PART NO.
INCLUDES
WB2001-III
I back stop and end stops
PART NO.
INCLUDES
WB2101-III
I back stop and end stops
PART NO.
INCLUDES
WB2201-III
I back stop and end stops
PART NO.
INCLUDES
WB2002-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB2102-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB2202-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB2003-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
PART NO.
INCLUDES
WB2103-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
PART NO.
INCLUDES
WB2203-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
1. Select Easy-Order workbench
configuration.
2. I Select worksurface style.
See page 56 for descriptions.
LTS =
GLS =
PLS =
BTS =
Lista Top
Galvanized steel
Plastic laminate
Butcher block
All worksurfaces have a standard square edge and are 30"
deep.
3. I Select worksurface size.
4830 = 48" long x 30" deep
6030 = 60" long x 30" deep
7230 = 72" long x 30" deep
4. I Select paint color. For color
chart, see back cover or below.
EXAMPLE: to order a WB2201 workbench with a 72" long plastic laminate
worksurface and Bright Blue paint, the
part number would be
WB2201-PLS7230BB.
54
I BE (Beige paint) I BB (Bright Blue paint) I BK (Black paint) I CB (Classic Blue paint) I GR (Dark Gray paint)
Mobile Workbenches with 1 Mobile Leg and 1 Cabinet
Overall bench height including worksurface is 37 1⁄4". Includes:
Overall bench height including worksurface is 37 1⁄4". Includes:
• 1 Lista Mobile Leg (leg is 35 1⁄2"
high)
• 1 stringer
• 1 MP0600-0202NA cabinet
• 1 Lista Mobile Leg (leg is 35 1⁄2"
high)
• 1 stringer
• 1 MP0600-0501NA cabinet
PART NO.
WB2300-III
I
PART NO.
WB2400-III
I
This corporate aircraft operator wanted to upgrade
its maintenance facility to match the quality of its aircraft. Several mobile benches, including this mobile
inspection station, are used in the company’s hangar
and support shop.
PART NO.
INCLUDES
WB2301-III
I back stop and end stops
PART NO.
INCLUDES
WB2401-III
I back stop and end stops
PART NO.
INCLUDES
WB2302-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
PART NO.
INCLUDES
WB2402-III
I stationary riser shelf with
back stop + full rear panel
workbench end stops
The mobile workbench used at this electronic repair
facility brings repair tools and parts right to the
point of use, without sacrificing durability and
drawer storage space. The companion mobile storage cabinet (designed to be stored between the
workbench cabinet pedestals) adds to the flexibility
of this arrangement. For information on ordering
PART NO.
INCLUDES
WB2303-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
PART NO.
INCLUDES
WB2403-III
I 12" adjustable riser shelf
with back stop
workbench back stop and
end stops
mobile workbenches with two cabinet pedestals,
contact your Lista distributor.
I GG (Green paint) I LG (Light Gray paint) I NR (Red paint) I SN (Sand paint) I FW (White paint)
55
Industrial Workbench Worksurfaces
Lista worksurfaces are all
easy to maintain, rugged, and
durable.
Worksurfaces come in 48",
60", 72", 84", 90" and 96"
lengths, and are 24", 30" or 36"
deep, depending on worksurface. Other sizes are available,
and certain worksurfaces are
available with a bullnose front
edge.
Butcher Block
Satin finish 1 3⁄4" thick hardwood.
Available in standard square edge
(shown above) or bullnose front edge.
To order a bullnose edge, add “BN” to
the end of the part number.
PART NO.
24" deep
BTOP-4824
BTOP-6024
BTOP-7224
BTOP-8424
BTOP-9024
BTOP-9624
30" deep
BTOP-48
BTOP-60
BTOP-72
BTOP-84
BTOP-90
BTOP-96
36" deep
BTOP-4836
BTOP-6036
BTOP-7236
BTOP-8436
BTOP-9036
BTOP-9636
LENGTH
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
Galvanized Steel Over
Wood
Lista Top with additional heavy-gauge
galvanized steel cover that is fitted over
top and sides of wood core, 1 13⁄16"
thick.
PART NO.
30" deep
LSTOP-48
LSTOP-60
LSTOP-72
LSTOP-84
LSTOP-90
LSTOP-96
36" deep
LSTOP-4836
LSTOP-6036
LSTOP-7236
LSTOP-8436
LSTOP-9036
LSTOP-9636
LENGTH
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
Stainless Steel Over Wood
Worksurface is constructed of durable,
heavy gauge stainless steel, fitted over
top and sides of wood core, 1 13⁄ 16"
thick.
Lista Top
1 3⁄4" thick worksurface with wood
core and 3⁄ 8" thick sanded oil-resistant
pressed wood, top and bottom.
PART NO.
30" deep
LTOP-48
LTOP-60
LTOP-72
LTOP-84*
LTOP-90*
LTOP-96*
36" deep
LTOP-4836
LTOP-6036
LTOP-7236
LTOP-8436*
LTOP-9036*
LTOP-9636*
LENGTH
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
*requires additional support (third leg or hat
section stiffener)
56
PART NO.
30" deep
LSSTOP-48
LSSTOP-60
LSSTOP-72
LSSTOP-84
LSSTOP-90
LSSTOP-96
36" deep
LSSTOP-48X36
LSSTOP-60X36
LSSTOP-72X36
LSSTOP-84X36
LSSTOP-90X36
LSSTOP-96X36
LENGTH
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
Plastic Laminate
Particle board core with plastic laminated top and sides. 1 9⁄16" thick. Dove
gray is standard but other colors are
available on request. Available in
standard square edge or bullnose front
edge (shown above). To order a bullnose edge, add “BN” to the end of the
part number.
PART NO.
24" deep
PTOP-4824
PTOP-6024
PTOP-7224
PTOP-8424*
PTOP-9024*
PTOP-9624*
30" deep
PTOP-48
PTOP-60
PTOP-72
PTOP-84*
PTOP-90*
PTOP-96*
36" deep
PTOP-4836
PTOP-6036
PTOP-7236
PTOP-8436*
PTOP-9036*
PTOP-9636*
LENGTH
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
48"
60"
72"
84"
90"
96"
*requires additional support (third leg or hat
section stiffener)
Industrial Workbench Under-Worksurface Accessories
Lista Legs
Panel Legs
Each welded onepiece leg assembly is
2 1⁄ 2" wide heavy
gauge steel. Each foot
has a bottom hole for
leveling glide (included)
or anchoring. Height shown includes
leveling glide.
Same basic construction as the
Lista Leg with a
formed panel
welded in place.
Includes leveling
glides.
PART NO.
WORKSURFACE DEPTH
27 1⁄2" (700mm) high
WBLL27.5X22.5
24" (610mm)
WBLL27.5X28.5
30" (762mm)
WBLL27.5X34.5
36" (915mm)
29 1⁄2" (750mm) high
WBLL29.5X22.5
24" (610mm)
WBLL29.5X28.5
30" (762mm)
WBLL29.5X34.5
36" (915mm)
31 1⁄2" (800mm) high
WBLL31.5X22.5
24" (610mm)
WBLL31.5X28.5
30" (762mm)
WBLL31.5X34.5
36" (915mm)
33 1⁄2" (850mm) high
WBLL33.5X22.5
24" (610mm)
WBLL33.5X28.5
30" (762mm)
WBLL33.5X34.5
36" (915mm)
35 1⁄2" (900mm) high
WBLL35.5X22.5
24" (610mm)
WBLL35.5X28.5
30" (762mm)
WBLL35.5X34.5
36" (915mm)
39 1⁄2" (1000mm) high
WBLL39.5X22.5
24" (610mm)
WBLL39.5X28.5
30" (762mm)
WBLL39.5X34.5
36" (915mm)
PART NO.
WORKSURFACE DPTH.
27 1⁄2" (700mm) high
WBLL /P27.5X22.5
24" (610mm)
WBLL /P27.5X28.5
30" (762mm)
WBLL /P27.5X34.5
36" (915mm)
29 1⁄2" (750mm) high
WBLL /P29.5X22.5
24" (610mm)
WBLL /P29.5X28.5
30" (762mm)
WBLL /P29.5X34.5
36" (915mm)
31 1⁄2" (800mm) high
WBLL /P31.5X22.5
24" (610mm)
WBLL /P31.5X28.5
30" (762mm)
WBLL /P31.5X34.5
36" (915mm)
33 1⁄2" (850mm) high
WBLL /P33.5X22.5
24" (610mm)
WBLL /P33.5X28.5
30" (762mm)
WBLL /P33.5X34.5
36" (915mm)
39 1⁄2" (1000mm) high
WBLL /P39.5X22.5
24" (610mm)
WBLL /P39.5X28.5
30" (762mm)
WBLL /P39.5X34.5
36" (915mm)
Lista Mobile Legs
Same basic construction
as the Lista Leg but with
2 factory mounted 6"
heavy duty casters. Leg
is available with either
fixed casters or swivel
casters with wheel locks.
Requires stringer.
Fixed Casters
PART NO.
WORKSUR. DPTH.
33 1⁄2" (850mm) overall height
WBLL/M33.5X22.5R6B
24" (610mm)
WBLL/M33.5X28.5R6B
30" (762mm)
WBLL/M33.5X34.5R6B
36" (915mm)
35 1⁄2" (900mm) overall height
WBLL/M35.5X22.5R6B
24" (610mm)
WBLL/M35.5X28.5R6B
30" (762mm)
WBLL/M35.5X34.5R6B
36" (915mm)
Swivel Casters
PART NO.
WORKSUR. DPTH.
33 1⁄2" (850mm) overall height
WBLL/M33.5X22.5S6B
24" (610mm)
WBLL/M33.5X28.5S6B
30" (762mm)
WBLL/M33.5X34.5S6B
36" (915mm)
35 1⁄2" (900mm) overall height
WBLL/M35.5X22.5S6B
24" (610mm)
WBLL/M35.5X28.5S6B
30" (762mm)
WBLL/M35.5X34.5S6B
36" (915mm)
Mobile
Panel Legs
Same basic construction as the
Panel Leg but
with 2 factory
mounted 6"
heavy duty casters. Available
with either fixed casters or swivel casters with wheel locks.
Fixed Casters
PART NO.
WORKSUR. DPTH.
33 1⁄2" (850mm) overall height
WBLL/MP33.5X22.5R6B 24" (610mm)
WBLL/MP33.5X28.5R6B 30" (762mm)
WBLL/MP33.5X34.5R6B 36" (915mm)
35 1⁄2" (900mm) overall height
WBLL/MP35.5X22.5R6B 24" (610mm)
WBLL/MP35.5X28.5R6B 30" (762mm)
WBLL/MP35.5X34.5R6B 36" (915mm)
Swivel Casters
PART NO.
WORKSUR. DPTH.
33 1⁄2" (850mm) overall height
WBLL/MP33.5X22.5S6B 24" (610mm)
WBLL/MP33.5X28.5S6B 30" (762mm)
WBLL/MP33.5X34.5S6B 36" (915mm)
35 1⁄2" (900mm) overall height
WBLL/MP35.5X22.5S6B 24" (610mm)
WBLL/MP35.5X28.5S6B 30" (762mm)
WBLL/MP35.5X34.5S6B 36" (915mm)
Stringers/Foot Rests
Telescoping heavy gauge U channel with
2 mounting holes on each end plate.
PART NO.
WBLST48/ II
WBLST60/ II
WBLST72/ II
WBLST84/ II
WBLST90/ II
WBLST96/ II
WORKSURF. LENGTH
48"
60"
72"
84"
90"
96"
Privacy Panels
Steel panel attaches to leg or cabinet
and runs full length of worksurface.
22 3⁄4" high.
PART NO.
WBLPP22.8X48
WBLPP22.8X60
WBLPP22.8X72
WBLPP22.8X84
WBLPP22.8X90
WBLPP22.8X96
WORKSURF. LENGTH
48"
60"
72"
84"
90"
96"
Leg Heights
Bottom Shelves
Telescoping heavy gauge steel shelf,
12" deep, for use as storage or foot rest.
150 lb. weight capacity for evenly distributed loads, except as noted.
PART NO.
WBLBS48/ II
WBLBS60/ II
WBLBS72/ II
WBLBS84/ II
WBLBS90/ II *
WBLBS96/ II *
WORKSURF. LENGTH
48"
60"
72"
84"
90"
96"
*100 lb. weight capacity
Use the leg heights shown below to
match a cabinet pedestal in a legplus-cabinet below-worksurface
configuration. For a selection of
drawer cabinets to serve as pedestals
for workbenches, see pages 60-69.
LEG HEIGHT
27 1⁄2"
29 1⁄2"
31 1⁄2"
33 1⁄2"
MATCHES CAB. PEDESTAL
600 height without base
600 height with 2" base
600 height with 4" base
600 height with 6" base
750 height without base
351⁄2"(mobile) 600 height w/ mobile base
39 1⁄2"
900 height without base
750 height with 6" base
How to order stringers and
bottom shelves
1. Select part number based on
workbench length.
2. I Specify left-hand (facing the
workbench) bench support.
LL = Lista Leg or Panel Leg
NW = NW cabinet
MP = MP cabinet
3. I Specify right-hand (facing
the workbench) bench support.
LL = Lista Leg or Panel Leg
NW = NW cabinet
MP = MP cabinet
EXAMPLE: to order a bottom shelf
for a workbench with a 72" worksurface, an MP Width cabinet as the
left-hand pedestal and a Lista Leg as
the right-hand support, the part
number would be WBLBS72/MPLL.
57
Industrial Workbench Above-Worksurface Accessories
The bench components on
this page allow you to customize above the worksurface
for your particular needs.
All parts must be ordered
separately to match the length
of the worksurface you have
chosen.
How to order workbench
above-worksurface accessories
1. Select worksurface length and
depth (see page 56).
2. Select back stop, end stop, shelf
or panel part numbers to correspond to both length and depth
of worksurface.
Back Stops and End Stops
Steel back stops and end stops have
rounded corners. Stops extend approximately 3" above the worksurface. For
use with worksurfaces or shelves.
Back Stops
PART NO.
WBTBS-48
WBTBS-60
WBTBS-72
WBTBS-84
WBTBS-90
WBTBS-96
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
End Stops (pair)
PART NO.
WBTES-22
WBTES-28
WBTES-34
WORKSURFACE DEPTH
24"
30"
36"
Shelves measure 1 1⁄4" thick x 12" deep.
Shelf height can be adjusted in 1 1⁄2"
increments from 12"-18". A steel back
stop is available for the shelf assembly
(ordered separately – see above).
Includes the number of adjustable support brackets shown in the charts.
Assemblies with Plastic
Laminate Shelf
PART NO.
ARS48P
ARS60P
ARS72P
ARS84P
ARS90P
ARS96P
WKSURF. LGTH.
48"
60"
72"
84"
90"
96"
# SUPPORTS
2
2
2
3
3
3
Assemblies w/Butcher Block Shelf
58
Open Riser Shelves
Open shelf (open back, no shelf back stop)
PART NO.
SRS48
SRS60
SRS72
SRS84
SRS90
SRS96
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Shelf with back stop (open back)
Adjustable Riser Shelf
Assemblies
For a selection of overhead cabinets
for additional storage above 15"deep
stationary riser shelves, see our
General Storage Catalog.
Made of steel to support heavy loads.
Shelf is 13 1⁄2" overall height (12"
clearance). Optional louvered closed
back rear panel is shown above.
Open Riser Shelves with Shelf
Back Stop
3. Specify paint color from the
chart on the back cover.
Overhead Cabinets
Stationary Riser Shelves –
10 1⁄2" deep
Above-worksurface accessories
PART NO.
ARS48B
ARS60B
ARS72B
ARS84B
ARS90B
ARS96B
using the Nexus System are
Adjustable Support Bracket
shown on pages 76-85.
Bracket supports riser shelf. May be
required to supplement the supports
included with shelf assemblies (see
charts above) for support of long
shelves or shelves carrying heavy loads.
PART NO.
ARS-BR
WKSURF. LGTH.
48"
60"
72"
84"
90"
96"
# SUPPORTS
2
2
2
2
3
3
PART NO.
SRS48-1
SRS60-1
SRS72-1
SRS84-1
SRS90-1
SRS96-1
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Riser Shelves with Full Panel
Solid closed back, with shelf back stop
PART NO.
SRS48-2
SRS60-2
SRS72-2
SRS84-2
SRS90-2
SRS96-2
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Pegboard closed back, with shelf back stop
PART NO.
SRS48-2P
SRS60-2P
SRS72-2P
SRS84-2P
SRS90-2P
SRS96-2P
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Louvered closed back, with shelf back stop
(shown above)
PART NO.
SRS48-2L
SRS60-2L
SRS72-2L
SRS84-2L
SRS90-2L
SRS96-2L
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Stationary Riser Shelves –
15" deep
Provides additional storage depth.
Particularly suited for supporting overhead cabinets. Shelf is 13 1⁄2" overall
height (12" clearance). Optional pegboard closed back rear panel is shown
above.
Open Riser Shelves
Open shelf (open back, no shelf back stop)
PART NO.
SRS48-15D
SRS60-15D
SRS72-15D
SRS84-15D
SRS90-15D
SRS96-15D
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Open Riser Shelves with Shelf
Back Stop
Shelf with back stop (open back)
PART NO.
SRS48-1-15D
SRS60-1-15D
SRS72-1-15D
SRS84-1-15D
SRS90-1-15D
SRS96-1-15D
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Riser Shelves with Full Panel
Solid closed back, with shelf back stop
PART NO.
SRS48-2-15D
SRS60-2-15D
SRS72-2-15D
SRS84-2-15D
SRS90-2-15D
SRS96-2-15D
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Pegboard closed back, with shelf back stop
(shown above)
PART NO.
SRS48-2P-15D
SRS60-2P-15D
SRS72-2P-15D
SRS84-2P-15D
SRS90-2P-15D
SRS96-2P-15D
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
Louvered closed back, with shelf back stop
PART NO.
SRS48-2L-15D
SRS60-2L-15D
SRS72-2L-15D
SRS84-2L-15D
SRS90-2L-15D
SRS96-2L-15D
WORKSURFACE LENGTH
48"
60"
72"
84"
90"
96"
How to Order Industrial Workbench Custom Configurations
These are the basic steps
3
required for ordering custom
workbenches from Lista.
3
TO ORDER AN EASY-ORDER
COMBINATION (WORKBENCH WITH PRECONFIGURED ACCESSORIES):
3
• PAGES 52-53 FOR INDUS-
1
TRIAL WORKBENCHES
• PAGES 54-55 FOR INDUSTRIAL MOBILE WORKBENCHES
2
2
2
1 Select worksurface
Select the worksurface that best
suits your needs from the choices on
page 56. Choose the worksurface
length, depth and style that you prefer.
2 Select below-worksur-
3 Select above-worksurface accessories
Select the back stop and end
stops (page 58), shelves (stationary or adjustable – see
page 58) and/or Nexus System
components (pages 76-85) that
suit your needs.
face accessories or bases
Select either 2-leg,1-leg-with-cabinet or
2-cabinet configuration. Legs, stringers,
bottom shelves and privacy panels are
shown on page 57. Hanging cabinets
are shown on page 36. To select a
cabinet pedestal(s), please see
pages 60-69.
4 Select colors
Select a color from the chart on
the back cover. Cabinet housing
and drawer fronts can be different
colors, but drawer interiors are
always gray.
ench Order
Sample Workb
QTY.
1
PART NO.
BTOP-60
DESCRIPTION
worksurface
butcher block
Lista Leg
1
2
2
8.5
WBLL33.5X2
ringer
st
2
P
pedestal
WBLST60LLM
1
Order cabinet
yas
E
B
B
G
R
3
02-F6
MP0600-04
1
back stop
3
WBTBS-60
adjustable
1
butcher block
ARS60B
riser shelf
1
3
op
st
ck
ba
f
el
sh
4
t
WBTBS-60
in
pa
1
ue
bl
ht
ig
br
BB
1
59
NW Narrow Width Cabinets – 16 7⁄ 8" wide x 28 1⁄ 2" deep
Space-saving solutions for
every workspace
WE OFFER A NUMBER
OF PRE-CONFIGURED
EASY-ORDER COMBI-
• Ideal workbench
pedestals
• The right storage solution
when space is at
a premium
NATIONS
• NARROW WIDTH
CABINETS:
PAGES 62-63
• NARROW WIDTH
MOBILE CABINETS:
PAGE 64
Narrow Width cabinets serve as
workbench pedestals at this
biotech manufacturer’s central
utility plant’s maintenance hub.
The department’s electricians,
mechanics and technicians each
have a workstation which, in
addition to housing their computer, tools and test equipment,
also has storage space for personal items.
60
NW Narrow Width Custom Cabinet Ordering
NW
12 1⁄ 2"
For detailed directions on
® (318MM)* ®
19 UNITS
®
ordering custom cabinets and
complete descriptions of the
options on this page, please
24"
(610MM)*
36 UNITS
see our General Storage
®
Catalog.
*INSIDE DIMENSIONS
1 Select cabinet housing
Lista’s steel cabinet housings offer
strength and flexibility. Drawers and
shelves can be assembled in any
sequence.
16 7⁄8" wide x 28 1⁄ 2" deep
(428mm x 725mm)
PART NO.
OVERALL HEIGHT
(without base)
15 3⁄4" (400mm)
21 5⁄ 8" (550mm)
27 1⁄ 2" (700mm)
33 1⁄ 2" (850mm)
39 3⁄ 8" (1000mm)
52 3⁄16" (1325mm)
NW300
NW450
NW600
NW750
NW900
NW1225
2 Select lock
Cabinets come equipped with an individual lock (RG) and 2 keys. To select
other locking options, choose from the
chart below or see our General Storage
Catalog.
PART NO.
RG
KA
MA
NL
LOCK TYPE
individual lock
keyed alike lock
master lock
no lock wanted
3 Select base
Lista offers a wide array of cabinet
bases to suit any need. For descriptions, see our General Storage Catalog.
Frame Bases
PART NO.
NW-2
NW-4
NW-6
HEIGHT
2" (50mm)
4" (100mm)
6" (150mm)
RAISE 600 CABS. TO
desk height
low bench height
standard bench
height
Mobile Bases
Mobile bases include a set of 2 fixed
and 2 swivel casters with wheel locks.
Mobile bases not recommended for use
with 1225 height cabinets.
PART NO.
CASTERS OAH CAP.
Use with 1 NW housing
TMMB-19/3.5
3 1⁄ 2"x 1 1⁄4" 4 3⁄4" 900 lb.
CB-NW4X1
4"x 1 1⁄4" 5 5⁄ 8" 1000 lb.
CB-NW4B
4"x 2"
6 1⁄4" 1400 lb.
Use with 2 NW housings on 1 pan base
MBP-NW/NW4B 4"x 2"
6 1⁄4" 1400 lb.
MBP-NW/NW6B 6"x 2"
8 1⁄8" 2400 lb.
4 Select top
Lista tops are attractive, durable complements to any cabinet. Top depth is
28 1⁄ 2". For top descriptions, see
page 42.
PART NO.
NW-RT
NW1BCT
NW1PCT
NW1RCT
DESCRIPTION
retainer top with
ribbed mat
butcher block
plastic laminate
phenolic resin
HT.
3⁄ 4"
1 3⁄ 4"
1 9⁄16"
1"
5 Select drawers
Lista drawers, with their unique construction, are the most stable and
space-maximizing in the industry.
150 lb. (70kg) maximum load capacity.
PART NO.
NW75N
NW100N
NW125N
NW150N
NW175N
NW200N
NW225N
NW250N
USABLE HT.
2 3⁄ 8" (61mm)
3 3⁄ 8" (86mm)
4 3⁄ 8" (111mm)
5 1⁄4" (133mm)
6 1⁄4" (159mm)
7 1⁄4" (185mm)
8 1⁄4" (203mm)
9 1⁄4" (229mm)
NW300N-FFH* 11" (279mm)
NW325N-FFH* 12" (305mm)
SIDEWALL HT.
2" (52mm)
3" (77mm)
3" (77mm)
5" (127mm)
5" (127mm)
7" (177mm)
7" (177mm)
8 15⁄16"
(227mm)
10" (254mm)
10" (254mm)
*file drawer (for letter files only)
5 Select shelves and
doors
Shelves
Shelves allow storage of bulky items in
close proximity to high density drawer
storage.
Adjustable Shelf
PART NO. USABLE WIDTH USABLE DEPTH
NW-AS
14 3⁄ 8" (366mm) 24 1⁄4" (616mm)
Bottom Shelf
PART NO. USABLE WIDTH USABLE DEPTH
NW-BS
14 7⁄16" (367mm) 23 3⁄4" (604mm)
Lista’s modular building
block system means that your
Narrow Width cabinets can be
configured to exactly suit your
requirements.
To configure your custom
cabinet, simply follow the steps
shown in the charts to the left.
Total drawer and/or door
Flush Hinged Doors
model numbers must add up to
Doors protect cabinet contents stored
on shelves. Door with integrated handle is reversible in field to allow door to
open in opposite direction. To order,
door opening orientation (“R” for right
or “L” for left) must be written in place
of the red box ( I ) in the part number.
Only bottom and adjustable shelves
may be installed behind flush doors.
the model number of the housing.
PART NO.
FD300-19 I *
FD450-19 I *
FD600-19 I *
FD750-19 I
FD900-19 I
HEIGHT
11 13⁄16" (300mm)
17 11⁄16" (450mm)
23 5⁄ 8" (600mm)
29 9⁄16" (750mm)
35 7⁄16" (900mm)
*limit: 1 adjustable shelf and 1 bottom shelf
6 Select drawer partitions and dividers
• Narrow Width drawer interior sets,
page 65
• Individual drawer partitioning
accessories, see our General
Storage Catalog
EXAMPLE: 900 housing
•
100 drawer
100 drawer
150 drawer
150 drawer
Total drawer height = 900
200 drawer
200 drawer
EXAMPLE: 900 housing with flush
hinged door
•
150 drawer
150 drawer
600 flush
door
Total drawer and door
height = 900
7 Select colors
To order cabinet housing and drawer
front paint colors, see back cover.
61
NW Narrow Width Easy-Order Cabinet Combinations
NW600 Cabinets for Workbench Pedestals
NW750 Cabinets for
Workbench Pedestals
27 1⁄ 2" high
33 1⁄ 2" high
DRAWER HT. DRAWER INTERIOR
How to read the charts on this
page
The 2 columns to the right of each
cabinet illustration indicate:
• Drawer heights
• Drawer interior sets (shown on
page 65)
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
212
104
5" (150N)
104
7" (200N)
104
212
212
107
107
107
107
107
PART NO.
DRWS. COMPTS.
NW0600-0701N-III
I 7
NW0600-0701NA-III
I 7
59
PART NO.
DRWS. COMPTS.
NW0600-0402N-III
I 4
NW0600-0402NA-III
I 4
24
2" (75N)
2" (75N)
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
212
212
107
107
104
107
107
104
PART NO.
DRWS. COMPTS.
NW0750-0801N-III
I 8
NW0750-0801NA-III
I 8
60
The chart below the illustration
indicates:
• Part numbers
• Number of drawers
• Number of drawer compartments
created by the interior sets (shown
on page 65)
How to order a Narrow Width
Easy-Order Cabinet
1. Select Easy-Order Cabinet Combination either without or with drawer
interior sets (designated by an “A”
at the end of the part number – i.e.,
NW0600-0601NA).
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
DRAWER HT.
DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
5" (150N)
104
5" (150N)
104
105
212
107
107
107
104
PART NO.
DRWS. COMPTS.
NW0600-0601N-III
I 6
NW0600-0601NA-III
I 6
42
11" (300N-FFH) FILE DRAWER
PART NO.
DRWS. COMPTS.
NW0600-0301N-III
I 3
NW0600-0301NA-III
I 3
8
2" (75N)
2" (75N)
2" (75N)
2" (75N)
3" (100N)
5" (150N)
212
212
107
107
107
104
7" (200N)
104
PART NO.
DRWS. COMPTS.
NW0750-0701N-III
I 7
NW0750-0701NA-III
I 7
53
2. I Select base type.
NB
F2
F4
F6
=
=
=
=
none
2" frame base
4" frame base
6" frame base
For additional bases, see page 61;
for Easy-Order mobile combinations,
see page 64.
3. I Select lock type.
NL
RG
KA
MA
=
=
=
=
none
individual
keyed-alike
master
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
DRAWER HT.
2" (75N)
2" (75N)
3" (100N)
5" (150N)
018
212
212
104
11" (300N-FFH) FILE DRAWER
7" (200N)
104
PART NO.
DRWS. COMPTS.
NW0600-0501N-III
I 5
NW0600-0501NA-III
I 5
50
DRAWER INTERIOR
11" (300N-FFH) FILE DRAWER
PART NO.
NW0600-0201N-III
I
DRWS. COMPTS.
2
-
2" (75N)
2" (75N)
3" (100N)
5" (150N)
018
018
212
104
5" (150N)
104
7" (200N)
104
PART NO.
DRWS. COMPTS.
NW0750-0601N-III
I 6
NW0750-0601NA-III
I 6
60
For additional lock options, see our
General Storage Catalog.
4. I Select paint color. For color
chart, see the back cover or below.
EXAMPLE: to order an NW06000402N cabinet with a 6" frame base,
an individual lock and Bright Blue
paint, the part number would be
NW0600-0402N-F6RGBB (shown
in photo at top of page).
62
DRAWER HT.
DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
3" (100N)
4" (125N)
018
212
104
5" (150N)
11" (300N-FFH) FILE DRAWER
104
450 DOOR
DRAWER HT.
DRAWER INTERIOR
2" (75N)
3" (100N)
4" (125N)
018
212
104
5" (150N)
104
11" (300N-FFH) FILE DRAWER
BOTTOM SHELF
PART NO.
DRWS. COMPTS.
NW0600-0401N-III
I 4
NW0600-0401NA-III
I 4
34
PART NO.
DRWS. COMPTS.
NW0600-0202N-III
I 1
NW0600-0202NA-III
I 1
4
PART NO.
DRWS. COMPTS.
NW0750-0501N-III
I 5
NW0750-0501NA-III
I 5
38
I BE (Beige paint) I BB (Bright Blue paint) I BK (Black paint) I CB (Classic Blue paint) I GR (Dark Gray paint)
16 7⁄8" wide x 28 1⁄2" deep
NW
NW900 Cabinets
39
DRAWER HT. DRAWER INTERIOR
3" (100N)
3" (100N)
5" (150N)
212
212
104
5" (150N)
104
9" (250N)
-
PART NO.
DRWS. COMPTS.
NW0750-0502N-III
I 5
NW0750-0502NA-III
I 5
32
3⁄ 8"
NW1225 Cabinets
high
52 3⁄ 16" high
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
018
018
212
212
107
107
107
104
5" (150N)
107
5" (150N)
107
5" (150N)
104
7" (200N)
104
5" (150N)
104
9" (250N)
104
PART NO.
DRWS. COMPTS.
NW0900-0901N-III
I 9
NW0900-0901NA-III
I 9
89
DRAWER HT.
DRAWER INTERIOR
5" (150N)
107
6" (175N)
104
11" (300N-FFH) FILE DRAWER
11" (300N-FFH) FILE DRAWER
11" (300N-FFH) FILE DRAWER
PART NO.
DRWS. COMPTS.
NW0900-0501N-III
I 5
NW0900-0501NA-III
I 5
26
PART NO.
DRWS. COMPTS.
NW1225-0501N-III
I 5
NW1225-0501NA-III
I 5
11
DRAWER HT.
DRAWER INTERIOR
11" (300N-FFH) FILE DRAWER
DRAWER HT. DRAWER INTERIOR
5" (150N)
107
5" (150N)
104
7" (200N)
107
9" (250N)
104
PART NO.
DRWS. COMPTS.
NW0750-0401N-III
I 4
NW0750-0401NA-III
I 4
22
DRAWER HT.
DRAWER INTERIOR
5" (150N)
104
11" (300N-FFH) FILE DRAWER
11" (300N-FFH) FILE DRAWER
PART NO.
DRWS. COMPTS.
NW0750-0301N-III
I 3
NW0750-0301NA-III
I 3
4
DRAWER HT. DRAWER INTERIOR
5" (150N)
104
600 DOOR
ADJUSTABLE SHELF
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
212
212
107
107
107
107
104
7" (200N)
104
7" (200N)
107
9" (250N)
104
7" (200N)
104
9" (250N)
108
PART NO.
NW0900-0801N-III
I
NW0900-0801NA-III
I
DRWS. COMPTS.
8
8
60
11" (300N-FFH) FILE DRAWER
12" (325N-FFH) FILE DRAWER
PART NO.
DRWS. COMPTS.
NW0900-0401N-III
I 4
NW0900-0401NA-III
I 4
23
DRAWER HT. DRAWER INTERIOR
DRAWER HT.
2" (75N)
2" (75N)
3" (100N)
5" (150N)
018
212
212
104
11" (300N-FFH) FILE DRAWER
5" (150N)
104
5" (150N)
104
7" (200N)
104
PART NO.
DRWS. COMPTS.
NW0900-0701N-III
I 7
NW0900-0701NA-III
I 7
58
PART NO.
NW1225-0401N-III
I
DRWS. COMPTS.
4
-
DRAWER INTERIOR
11" (300N-FFH) FILE DRAWER
11" (300N-FFH) FILE DRAWER
PART NO.
NW0900-0301N-III
I
DRWS. COMPTS.
3
-
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
3" (100N)
3" (100N)
5" (150N)
212
212
104
5" (150N)
5" (150N)
104
5" (150N)
104
9" (250N)
-
104
750 DOOR
ADJUSTABLE SHELF
BOTTOM SHELF
BOTTOM SHELF
PART NO.
DRWS. COMPTS.
NW0750-0302N-III
I 1
NW0750-0302NA-III
I 1
4
11" (300N-FFH) FILE DRAWER
PART NO.
DRWS. COMPTS.
NW0900-0601N-III
I 6
NW0900-0601NA-III
I 6
36
PART NO.
DRWS. COMPTS.
NW0900-0302N-III
I 1
NW0900-0302NA-III
I 1
4
I GG (Green paint) I LG (Light Gray paint) I NR (Red paint) I SN (Sand paint) I FW (White paint)
63
NW Narrow Width Easy-Order Mobile Cabinet Combinations
NW600 Mobile Cabinets
33
1⁄ 8"
NW750 Mobile Cabinets
39
high
1⁄ 8"
high
NW600 Mobile Work
Centers
33 3⁄4" high x 33 3⁄4" wide
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
Each mobile cabinet comes with:
• 2 fixed and 2 swivel casters with
wheel locks
• Handles
• Individual drawer latches
• 150 lb. load capacity
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
105
212
107
107
107
5" (150N)
104
• Drawer heights
• Drawer interior sets (shown on
page 65)
The chart below the illustration
indicates:
• Part numbers
• Number of drawers
• Number of drawer compartments
created by the interior sets (shown
on page 65)
How to order a Narrow Width
Easy-Order Mobile Cabinet
1. Select Easy-Order Cabinet
Combination either without or with
drawer interior sets (designated by
an “A” near the end of the part
number – i.e., NW0600-0601NA-M).
2. I Select lock type.
NL
RG
KA
MA
=
=
=
=
none
individual
keyed-alike
master
7" (200N)
INCL.
5" (150N) 104
104
2" (75N)
2" (75N)
3" (100N)
5" (150N)
104
7" (200N) 104
212
107
107
104
PART NO.
DRWS. COMPTS.
NW0750-0601N-M-II
I 6
NW0750-0601NA-M-II
I 6
60
PART NO.
MNW0600-0701-II
I
MNW0600-0701A-II
I
includes 4" x 1 1⁄4" casters
includes 4" x 1 1⁄4" casters
includes 4" x 2" casters
INT.
450 DOOR
DRWS. COMPTS.
6
6
38
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
3" (100N)
5" (150N)
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
5" (150N)
018
212
212
104
7" (200N)
104
9" (250N)
212
212
212
107
107
DRAW.HT. INT.
INCLUDES
3" (100N) 212
3" (100N) 212
5" (150N) 107
600 DOOR
104
9" (250N) 104
ADJ. SHELF
BOTTOM SHELF
PART NO.
DRWS. COMPTS.
NW0600-0501N-M-II
I 5
NW0600-0501NA-M-II
I 5
50
PART NO.
DRWS. COMPTS.
NW0750-0602N-M-II
I 6
NW0750-0602NA-M-II
I 6
54
PART NO.
MNW0600-0601-II
I
MNW0600-0601A-II
I
includes 4" x 1 1⁄4" casters
includes 4" x 1 1⁄4" casters
includes 4" x 2" casters
DRWS. COMPTS.
4
4
35
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
3" (100N)
5" (150N)
212
104
5" (150N)
104
7" (200N)
104
3" (100N)
5" (150N)
212
107
5" (150N)
107
5" (150N)
104
7" (200N)
104
INCL.
INCL.
INT.
INT.
5" (150N) 104
5" (150N) 104
450 DOOR
450 DOOR
BOTTOM SHELF
BOTTOM SHELF
PART NO.
DRWS. COMPTS.
NW0600-0402N-M-II
I 4
NW0600-0402NA-M-II
I 4
24
PART NO.
DRWS. COMPTS.
NW0750-0503N-M-II
I 5
NW0750-0503NA-M-II
I 5
34
PART NO.
MNW0600-0401-II
I
MNW0600-0401A-II
I
includes 4" x 1 1⁄4" casters
includes 4" x 1 1⁄4" casters
includes 4" x 2" casters
NW Mobile Cabinet Tops
Mesh Drawer Liner
For top descriptions, see page 42.
Non-slip polyester mesh liner protects
items in drawers without drawer interior sets from shifting or sliding.
Protects drawer bottom from scratches
and dents. Liner is non-toxic, washable
and treated to inhibit mold and mildew.
DRWS. COMPTS.
2
2
8
Mobile Cabinet Options
PART NO.
NW-RT
3. I Select paint color. For color
chart, see back cover.
2NW-RT*
Folding
Shelves
Shelf can be mounted on either the left
or right side of any mobile or stationary
cabinet. 50 lb. maximum capacity. Shelf
is 15" wide x 28 1⁄2" deep.
PART NO.
FS-36DX15-L
FS-36DX15-R
64
5" (150N)
DRAW.HT. INT.
PART NO.
DRWS. COMPTS.
NW0600-0601N-M-II
I 6
NW0600-0601NA-M-II
I 6
42
For additional lock options, see our
General Storage Catalog.
EXAMPLE: to order an NW06000501NA-M cabinet with an individual
lock and Red paint, the part number
would be NW0600-0501NA-MRGNR (shown in photo at top of page).
018
018
212
104
BOTTOM SHELF
How to read the charts on this
page
The 2 columns to the right of each cabinet illustration indicate:
2" (75N)
2" (75N)
3" (100N)
5" (150N)
MOUNTS TO
left side
right side
NW1BCT
NW2BCT*
NW1PCT
NW2PCT*
DESCRIPTION
retainer top with
ribbed mat
retainer top with
ribbed mat
butcher block
butcher block
plastic laminate
plastic laminate
*use with mobile work centers
HT.
3⁄ 4"
3⁄ 4"
1 3⁄ 4"
1 3⁄ 4"
1 9 ⁄16"
1 9 ⁄16"
PART NO.
NWMDL
NW Narrow Width Easy-Order Drawer Interior Sets
NW
How to order a Narrow Width
Easy-Order Drawer Interior Set
To order the drawer interior sets shown
on this page, use the part number in
the chart and add the drawer height in
place of the green box.
For all drawer heights
PART NO.
COMPTS. CMPT. WIDTH
NWDR104-I
2
5 1⁄ 2"
2
6 1⁄ 4"
For drawer heights 75 through 200
PART NO.
COMPTS. CMPT. WIDTH
NWDR105-I
3
4 1⁄ 8"
2
7 1⁄ 2"
For drawer heights 75 through 300
PART NO.
COMPTS. CMPT. WIDTH
NWDR106-I
3
6 1⁄ 4"
3
5 1⁄ 2"
EXAMPLE: to order an NWDR106
drawer interior set for a 100 height (3")
drawer, the part ordering number
would be NWDR106-100.
For drawer heights 75 through 200
PART NO.
COMPTS. CMPT. WIDTH
NWDR107-I
4
4 1⁄ 8"
3
7 1⁄ 2"
For all drawer heights
PART NO.
COMPTS. CMPT. WIDTH
NWDR108-I
4
5 1⁄ 2"
4
6 1⁄ 4"
For drawer heights 75 through 200
PART NO.
COMPTS. CMPT. WIDTH
NWDR209-I
6
3 1⁄ 2"
3
4 1⁄ 8"
For drawer heights 75 through 200
PART NO.
COMPTS. CMPT. WIDTH
NWDR212-I
4
4 1⁄ 8"
8
3 1⁄ 2"
For drawer heights 75 through 100
PART NO.
COMPTS. CMPT. SIZE
NWDR008-I
8
6" x 6"
For drawer heights 75 through 100
PART NO.
COMPTS. CMPT. SIZE
NWDR012-I
8
3" x 6"
4
6" x 6"
For drawer heights 75 through 100
PART NO.
COMPTS. CMPT. SIZE
NWDR016-I
16
3" x 6"
For drawer height 75
PART NO.
COMPTS.
NWDR018-I
2
8
8
For drawer height 75
PART NO.
COMPTS. CMPT. SIZE
NWDR024-I
16
3" x 3"
8
3" x 6"
For drawer height 75
PART NO.
COMPTS. CMPT. SIZE
NWDR082-I
16
3" x 3"
24
3" x 2"
For drawer height 75
PART NO.
COMPTS. CMPT. SIZE
NWDR083I
32
2" x 3"
24
2" x 2"
Sliding accessory tray
For drawer heights 100 through 250
PART NO.
COMPTS. CMPT. WID.
NWDR-AT06-I 5
3"
CMPT. SIZE
6" x 6"
3" x 6"
3" x 3"
65
MP Width Cabinets – 22 3⁄16" wide x 28 1⁄2" deep
Multi-purpose versatility and
functionality
• Perfect workbench
pedestals
• Can be adapted to serve
as mobile cabinets
WE OFFER A NUMBER
OF PRE-CONFIGURED
EASY-ORDER COMBINATIONS
• MP WIDTH CABINETS: PAGES 68-69
• MP WIDTH MOBILE
CABINETS: PAGE 70
Repair workbenches at Tinker
Air Force Base feature MP Width
cabinet pedestals to provide
technicians with ample storage
for tools and parts needed to
service aircraft hydraulics and
electronics.
66
MP Width Custom Cabinet Ordering
5 Select shelves, trays
complete descriptions of the
Lista offers a wide array of cabinet
bases to suit any need. For descriptions, see our General Storage Catalog.
options on this page, please
Fork Truck Base
ordering custom cabinets and
see our General Storage
Catalog.
Select cabinet housing
MP Width Cabinet Housings
22 3⁄16" wide x 28 1⁄2" deep
(564mm x 725mm)
MP300
MP450
MP600
MP750
MP900
MP1225
MP1350
OVERALL HEIGHT
(without base)
15 3⁄4" (400mm)
21 5⁄ 8" (550mm)
27 1⁄ 2" (700mm)
33 1⁄ 2" (850mm)
39 3⁄ 8" (1000mm)
52 3⁄16" (1325mm)
57 1⁄ 8" (1450mm)
MP Width Double Hinged Door
Cabinet Housings
Double hinged door housings are the
only door cabinets into which drawers
and roll-out trays can be installed
(shelves can also be installed in these
housings). Includes individual lock (RG)
and 2 keys.
3⁄16"
1⁄2"
22
wide x 29
(564mm x 750mm)
PART NO.
MPDHD600
MPDHD750
MPDHD900
MPDHD1225
MPDHD1350
deep
OVERALL HEIGHT
(without base)
27 1⁄ 2" (700mm)
33 1⁄ 2" (850mm)
39 3⁄ 8" (1000mm)
52 3⁄16" (1325mm)
57 1⁄ 8" (1450mm)
2 Select lock
Cabinets come equipped with an individual lock (RG) and 2 keys. To select
other locking options, choose from the
chart below or see our General Storage
Catalog.
PART NO.
RG
KA
MA
NL*
LOCK TYPE
individual lock
keyed alike lock
master lock
no lock wanted
PART NO.
MP-2
MP-4
MP-6
HEIGHT
2 3⁄ 8" (60mm)
HEIGHT
2" (50mm)
4" (100mm)
6" (150mm)
RAISE 600 CABS. TO
desk height
low bench height
standard bench ht.
Mobile bases include a set of 2 fixed
and 2 swivel casters with wheel locks.
Mobile bases not recommended for use
with 1225 height or higher cabinets.
PART NO.
CASTERS OAH CAP.
Use with 1 MP housing
CB-MP4B
4" x 2" 6 1⁄4" 1400 lb.
CB-MP6B
6" x 2" 8 1⁄8" 2400 lb.
Use with 2 MP housings on 1 pan base
MBP-MP/MP4ML 4"x 2"
6 1⁄4" 1400 lb.
MBP-MP/MP6ML 6"x 2"
8 1⁄8" 2400 lb.
4 Select top
Top depth is 28 1⁄2". (For tops for
29 1⁄2" deep housings with doors, contact your Lista representative.) For top
descriptions, see pages 42 and 56.
DESCRIPTION
retainer top w/ribbed mat
butcher block
plastic laminate
phenolic resin
galvanized steel over wood
stainless steel cabinet cover
HT.
3⁄ 4"
1 3⁄ 4"
1 9⁄16"
1"
113⁄16"
1⁄16"
5 Select drawers
Drawers have 150 lb. (70kg) weight
capacity for evenly distributed loads.
For MP Width cabinets with 440 lb.
(200kg) weight capacity, see our
General Storage Catalog.
PART NO.
MP75N
MP100N
MP125N
MP150N
MP175N
MP200N
MP250N
MP300N
®
Shelves
24"
(610MM)*
36 UNITS
Adjustable Shelf
Mobile Bases
PART NO.
MP-RT
MP1BCT
MP1PCT
MP1RCT
MP1LSCT
MP1SSC
18"
(459MM)*
27 UNITS
Shelves allow storage of bulky items in
close proximity to high density drawer
storage.
Frame Bases
Lista’s steel cabinet housings offer
strength and flexibility. Drawers,
shelves and roll-out trays can be
assembled in any sequence.
PART NO.
PART NO.
MP-FTB
and doors
®
®
3 Select base
USABLE HT.
2 3⁄ 8" (61mm)
3 3⁄ 8" (86mm)
4 3⁄ 8" (111mm)
5 1⁄4" (133mm)
6 1⁄4" (159mm)
7 1⁄4" (185mm)
9 1⁄4" (229mm)
11" (279mm)
SIDEWALL HT.
2" (52mm)
3" (77mm)
3" (77mm)
5" (127mm)
5" (127mm)
7" (177mm)
8 15⁄16" (227mm)
10 15⁄16"(277mm)
PART NO. USABLE WIDTH USABLE DEPTH
MP-AS
19 3⁄4" (502mm) 24 1⁄4" (616mm)
®
For detailed directions on
MP
*INSIDE DIMENSIONS
Bottom Shelf
PART NO. USABLE WIDTH USABLE DEPTH
MP-BS
19 13⁄16"(503mm) 23 3⁄4" (604mm)
Roll-Out Trays
Roll-out trays allow easy access to
stored items, even in the farthest corner. Trays have 150 lb. (70kg) weight
capacity for evenly distributed loads.
PART NO. USABLE WIDTH USABLE DEPTH
MP-TCN* 17 1⁄ 8" (435mm) 24" (609mm)
*mounts behind MP flush door (see below)
Flush Hinged Doors
Doors protect cabinet contents stored
on shelves. Door with integrated handle is reversible in field to allow door to
open in opposite direction. To order,
door opening orientation (“R” for right
or “L” for left) must be written in place
of the red box ( I ) in the part number.
Only bottom and adjustable shelves
may be installed behind flush doors.
PART NO.
FD300-27I *
FD450-27I *
FD600-27I *
FD750-27I
FD900-27I
HEIGHT
11 13⁄16" (300mm)
17 11⁄16" (450mm)
23 5⁄ 8" (600mm)
29 9⁄16" (750mm)
35 7⁄16" (900mm)
*limit: 1 adjustable shelf and 1 bottom shelf
Lista’s modular building
block system means that your
MP Width cabinets can be configured to exactly suit your
requirements.
To configure your custom
cabinet, simply follow the steps
shown in the charts to the left.
Total drawer and/or door
model numbers must add up to
the model number of the housing.
EXAMPLE: 900 housing
•
100 drawer
100 drawer
150 drawer
150 drawer
Total drawer height
= 900
200 drawer
200 drawer
6 Select drawer partitions and dividers
• MP Width drawer interior sets, p. 71
• Individual drawer partitioning
accessories, see our General
Storage Catalog
EXAMPLE: 900 housing with flush
hinged door
•
7 Select colors
To order cabinet housing and drawer
front paint colors, see the back cover.
150 drawer
150 drawer
600 flush door
Total drawer and door
height = 900
*not available for double hinged door
cabinets
67
MP Width Easy-Order Cabinet Combinations
MP300 Cabinets
15
3⁄4"
MP600 Cabinets for Workbench Pedestals
27 1⁄2" high
high
How to read the charts on this
page
The 2 columns to the right of each cabinet illustration indicate:
• Drawer heights
• Drawer interior sets (shown on
page 71)
The chart below the illustration indicates:
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
2" (75N)
2" (75N)
PART NO.
MP0300-0401N-III
I
MP0300-0401NA-III
I
316
316
209
209
DRWS. COMPTS.
4
4
50
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
2" (75N)
3" (100N)
4" (125N)
316
209
104
11" (300N)
-
PART NO.
MP0600-0701N-III
I
MP0600-0701NA-III
I
316
316
209
209
209
209
209
DRWS. COMPTS.
7
7
77
PART NO.
MP0600-0401N-III
I
MP0600-0401NA-III
I
DRWS. COMPTS.
4
4
29
• Part numbers
• Number of drawers
• Number of drawer compartments
created by the interior sets (shown
on page 71)
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
3" (100N)
5" (150N)
316
209
How to order an MP Width
Easy-Order Cabinet
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
5" (150N)
104
7" (200N)
104
1. Select Easy-Order Cabinet Combination either without or with drawer
interior sets (designated by an “A”
at the end of the part number – i.e.,
MP0750-0302NA).
DRAWER HT. DRAWER INTERIOR
2" (75N)
3" (100N)
4" (125N)
PART NO.
MP0300-0301N-III
I
MP0300-0301NA-III
I
316
209
209
DRWS. COMPTS.
3
3
34
PART NO.
MP0600-0601N-III
I
MP0600-0601NA-III
I
028
316
316
209
209
104
DRWS. COMPTS.
6
6
82
PART NO.
MP0600-0402N-III
I
MP0600-0402NA-III
I
DRWS. COMPTS.
4
4
33
2. I Select base type.
NB
FT
F2
F4
F6
=
=
=
=
=
none
fork truck
2" frame base
4" frame base
6" frame base
For additional bases, see page 67;
for Easy-Order mobile combinations,
see page 70.
3. I Select lock type.
NL
RG
KA
MA
=
=
=
=
none
individual
keyed-alike
master
DRAWER HT. DRAWER INTERIOR
3" (100N)
7" (200N)
PART NO.
MP0300-0201N-III
I
MP0300-0201NA-III
I
209
104
DRWS. COMPTS.
2
2
13
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
5" (150N)
5" (150N)
209
7" (200N)
104
9" (250N)
104
7" (200N)
PART NO.
MP0600-0501N-III
I
MP0600-0501NA-III
I
316
316
209
104
104
DRWS. COMPTS.
5
5
49
PART NO.
MP0600-0302N-III
I
MP0600-0302NA-III
I
DRWS. COMPTS.
3
3
17
For additional lock options, see our
General Storage Catalog.
4. I Select paint color. For color
chart, see the back cover or below.
EXAMPLE: to order an MP07500302NA cabinet with a fork truck base,
an individual lock and Light Gray paint,
the part number would be
MP0750-0302NA-FTRGLG
(shown in photo at top of page).
68
DRAWER HT. DRAWER INTERIOR
5" (150N)
209
5" (150N)
104
PART NO.
MP0300-0202N-III
I
MP0300-0202NA-III
I
DRWS. COMPTS.
2
2
13
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
3" (100N)
3" (100N)
3" (100N)
5" (150N)
316
209
209
104
5" (150N)
5" (150N)
104
104
450 DOOR
BOTTOM SHELF
PART NO.
MP0600-0502N-III
I
MP0600-0502NA-III
I
DRWS. COMPTS.
5
5
42
PART NO.
MP0600-0202N-III
I
MP0600-0202NA-III
I
DRWS. COMPTS.
1
1
4
I BE (Beige paint) I BB (Bright Blue paint) I BK (Black paint) I CB (Classic Blue paint) I GR (Dark Gray paint)
22 3⁄16" wide x 28 1⁄2" deep
MP
MP750 Cabinets for Workbench Pedestals
33
1⁄2"
MP900 Cabinets
39 3⁄8" high
high
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
2" (75N)
2" (75N)
3" (100N)
3" (100N)
9" (250N)
3" (100N)
3" (100N)
5" (150N)
316
209
209
5" (150N)
104
9" (250N)
104
PART NO.
MP0750-0702N-III
I
MP0750-0702NA-III
I
510
510
316
316
209
209
104
DRWS. COMPTS.
7
7
74
PART NO.
MP0750-0502N-III
I
MP0750-0502NA-III
I
DRWS. COMPTS.
5
5
42
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
028
316
316
209
209
209
5" (150N)
209
5" (150N)
104
5" (150N)
104
PART NO.
MP0750-0703N-III
I
MP0750-0703NA-III
I
DRWS. COMPTS.
7
7
91
7" (200N)
9" (250N)
104
104
PART NO.
MP0750-0401N-III
I
MP0750-0401NA-III
I
DRWS. COMPTS.
4
4
21
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
510
510
316
316
209
209
209
104
5" (150N)
209
5" (150N)
104
5" (150N)
104
7" (200N)
104
5" (150N)
104
9" (250N)
104
PART NO.
MP0900-0901N-III
I
MP0900-0901NA-III
I
DRWS. COMPTS.
9
9
87
PART NO.
MP0900-0501N-III
I
MP0900-0501NA-III
I
DRWS. COMPTS.
5
5
25
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
3" (100N)
5" (150N)
316
209
5" (150N)
209
7" (200N)
104
11" (300N)
-
7" (200N)
PART NO.
MP0900-0801N-III
I
MP0900-0801NA-III
I
316
316
316
316
209
209
104
104
DRWS. COMPTS.
8
8
90
PART NO.
MP0900-0502N-III
I
MP0900-0502NA-III
I
DRWS. COMPTS.
5
5
38
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
316
209
2" (75N)
2" (75N)
3" (100N)
5" (150N)
028
316
316
209
3" (100N)
7" (200N)
104
5" (150N)
209
600 DOOR
5" (150N)
104
ADJUSTABLE SHELF
7" (200N)
104
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
5" (150N)
028
316
209
209
3" (100N)
5" (150N)
7" (200N)
5" (150N)
104
7" (200N)
104
11" (300N)
DRAWER HT. DRAWER INTERIOR
-
209
104
BOTTOM SHELF
PART NO.
MP0750-0601N-III
I
MP0750-0601NA-III
I
DRWS. COMPTS.
6
6
70
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
3" (100N)
5" (150N)
316
316
209
209
104
9" (250N)
104
PART NO.
MP0750-0402N-III
I
MP0750-0402NA-III
I
DRWS. COMPTS.
4
4
29
PART NO.
MP0900-0701N-III
I
MP0900-0701NA-III
I
DRWS. COMPTS.
7
7
86
DRWS. COMPTS.
6
6
58
DRWS. COMPTS.
2
2
13
DRAWER HT. DRAWER INTERIOR
DRAWER HT. DRAWER INTERIOR
3" (100N)
3" (100N)
5" (150N)
316
209
209
5" (150N)
600 DOOR
5" (150N)
104
ADJUSTABLE SHELF
5" (150N)
104
9" (250N)
104
DRAWER HT. DRAWER INTERIOR
5" (150N)
104
BOTTOM SHELF
PART NO.
MP0750-0602N-III
I
MP0750-0602NA-III
I
PART NO.
MP0900-0402N-III
I
MP0900-0402NA-III
I
PART NO.
MP0750-0302N-III
I
MP0750-0302NA-III
I
104
750 DOOR
ADJUSTABLE SHELF
BOTTOM SHELF
DRWS. COMPTS.
1
1
4
PART NO.
MP0900-0601N-III
I
MP0900-0601NA-III
I
DRWS. COMPTS.
6
6
46
I GG (Green paint) I LG (Light Gray paint) I NR (Red paint) I SN (Sand paint) I FW (White paint)
PART NO.
MP0900-0302N-III
I
MP0900-0302NA-III
I
DRWS. COMPTS.
1
1
4
69
MP Width Easy-Order Mobile Cabinet Combinations
MP300 Mobile Carts
32
1⁄2"
MP600 Mobile Cabinets
35
high
1⁄2"
high
MP600 Mobile Work
Centers
35 1⁄2" high
DRAWER HT. DRAWER INTERIOR
2" (75N)
2" (75N)
3" (100N)
3" (100N)
3" (100N)
5" (150N)
Each mobile cabinet comes with:
• 2 fixed and 2 swivel casters with
wheel locks
• Tubular steel handles
• Individual drawer latches
• 150 lb. load capacity
028
316
316
209
209
104
DRAW.HT. IN.
INCLUDES
2" (75N)
2" (75N)
3" (100N)
5" (150N)
600 DOOR
316
316
209
104
ADJ. SHELF
7" (200N) 104
BOTTOM
SHELF
PART NO.
MSC- I
DRWS. COMPTS.
-
includes 4" x 1 1⁄4" casters
includes 4-sided retainer top with ribbed mat
PART NO.
MP0600-0601N-M-II
I
MP0600-0601NA-M-II
I
DRWS. COMPTS.
6
6
82
PART NO.
MMP0600-0702-II
I
MMP0600-0702A-II
I
DRWS. COMPTS.
5
5
49
includes 6" x 2" casters
44 3⁄8" wide
includes 6" x 2" casters
How to read the charts on this
page
DRAWER HT. DRAWER INTERIOR
The 2 columns to the right of each
cabinet illustration indicate:
2" (75N)
3" (100N)
4" (125N)
316
209
209
• Drawer heights
• Drawer interior sets (shown on
page 71)
The chart below the illustration
indicates:
• Part numbers
• Number of drawers
• Number of drawer compartments
created by the interior sets (shown
on page 71)
2. I Select lock type.
NL
RG
KA
MA
=
=
=
=
none
individual
keyed-alike
master
5" (150N) 104
5" (150N) 104
450 DOOR
450 DOOR
7" (200N)
104
BOTTOM
SHELF
BOTTOM
SHELF
includes 4" x 1 1⁄4" casters
includes 4-sided retainer top with ribbed mat
includes 6" x 2" casters
DRAWER HT. DRAWER INTERIOR
3" (100N)
7" (200N)
209
104
DRWS. COMPTS.
5
5
49
PART NO.
MMP0600-0402-II
I
MMP0600-0402A-II
I
DRWS. COMPTS.
2
2
8
includes 6" x 2" casters
44 3⁄8" wide
DRAWER HT. DRAWER INTERIOR
DRAW.HT. IN.
INCLUDES
3" (100N)
5" (150N)
316
209
600 DOOR
5" (150N)
104
2" (75N)
2" (75N)
3" (100N)
5" (150N)
7" (200N)
104
7" (200N) 104
510
018
316
209
ADJ. SHELF
BOTTOM
SHELF
DRWS. COMPTS.
4
4
33
PART NO.
DRWS. COMPTS.
MMPNW0600-0703-II
I 5
MMPNW0600-0703A-II
I 5
57
PART NO.
DRWS. COMPTS.
MCMP0300-0201N-II
I 2
MCMP0300-0201NA-II
I 2
13
PART NO.
MP0600-0402N-M-II
I
MP0600-0402NA-M-II
I
includes 4" x 1 1⁄4" casters
includes 4-sided retainer top with ribbed mat
includes 6" x 2" casters
includes 6" x 2" casters
39" wide (MP width drawers, NW width door)
MP Mobile Cabinet Tops
Mesh Drawer Liner
For top descriptions, see page 42.
Non-slip polyester mesh liner protects
items in drawers without drawer interior sets from shifting or sliding.
Protects drawer bottom from scratches
and dents. Liner is non-toxic, washable
and treated to inhibit mold and mildew.
Mobile Cabinet Options
PART NO.
MP-RT
3. I Select paint color. For color
chart, see back cover.
2MP-RT*
Folding Shelves
Shelf can be mounted on either the left
or right side of any mobile or stationary
cabinet. 50 lb. maximum capacity. Shelf
is 15" wide x 28 1⁄2" deep. Not for use
with mobile carts.
PART NO.
FS-36DX15-L
FS-36DX15-R
70
DRAW.HT. IN.
316
316
209
104
PART NO.
MP0600-0501N-M-II
I
MP0600-0501NA-M-II
I
For additional lock options, see our
General Storage Catalog.
EXAMPLE: to order an MP06000501NA-M cabinet with an individual
lock, Bright Blue paint and a retainer
top, the part number would be
MP0600-0501NA-M-RGBB, with an
MP-RT top (shown in photo at top of
page).
DRAW.HT. IN.
2" (75N)
2" (75N)
3" (100N)
5" (150N)
PART NO.
DRWS. COMPTS.
MCMP0300-0301N-II
I 3
MCMP0300-0301NA-II
I 3
34
How to order an MP Width
Easy-Order Mobile Cabinet
1. Select Easy-Order Cabinet
Combination either without or with
drawer interior sets (designated by
an “A” near the end of the part
number – i.e., MP0600-0402NA-M).
DRAWER HT. DRAWER INTERIOR
MOUNTS TO
left side
right side
MP1BCT
MP2BCT*
MP1PCT
MP2PCT*
DESCRIPTION
retainer top with
ribbed mat
retainer top with
ribbed mat
butcher block
butcher block
plastic laminate
plastic laminate
*use with 2 MP housings
HT.
3⁄ 4"
3⁄ 4"
1 3⁄ 4"
1 3⁄ 4"
1 9 ⁄16"
1 9 ⁄16"
PART NO.
MPMDL
MP Width Easy-Order Drawer Interior Sets
MP
How to order an MP Width
Easy-Order Drawer Interior Set
To order the drawer interior sets shown
on this page, use the part number in
the chart and add the drawer height in
place of the green box.
For all drawer heights
PART NO.
COMPTS. CMPT. WIDTH
MPDR104-I
2
7 1⁄ 2"
2
9 1⁄ 4"
For all drawer heights
PART NO.
COMPTS. CMPT. WIDTH
MPDR206-I
6
5 1⁄ 2"
For all drawer heights
PART NO.
COMPTS. CMPT. WIDTH
MPDR209-I
9
5 1⁄ 2"
EXAMPLE: to order an MPDR206
drawer interior set for a 100 height (3")
drawer, the part ordering number
would be MPDR206-100.
For drawer heights 75 through 150
PART NO.
COMPTS. CMPT. WIDTH
MPDR312-I
3
3 1⁄ 2"
9
4 1⁄ 8"
For drawer heights 75 through 150
PART NO.
COMPTS. CMPT. WIDTH
MPDR316-I
4
3 1⁄ 2"
12
4 1⁄ 8"
For drawer heights 75 through 125
PART NO.
COMPTS. CMPT. WIDTH
MPDR430-I
18
2 5⁄ 8"
12
3 1⁄ 2"
For drawer heights 75 through 150
PART NO.
COMPTS. CMPT. DEPTH
MPDR510-I
3
3 1⁄ 2"
4
15 5⁄ 8"
For drawer heights 75 through 125
PART NO.
COMPTS. CMPT. WIDTH
MPDR524-I
12
2 1⁄ 8"
12
2 5⁄ 8"
For drawer heights 75 through 125
PART NO.
COMPTS. CMPT. SIZE
MPDR012-I
12
6" x 6"
For drawer heights 75 through 125
PART NO.
COMPTS. CMPT. SIZE
MPDR018-I
12
3" x 6"
6
6" x 6"
For drawer heights 75 and 100
PART NO.
COMPTS. CMPT. SIZE
MPDR024-I
24
3" x 6"
For drawer height 75
PART NO.
COMPTS.
MPDR028-I
16
8
4
For drawer height 75
PART NO.
COMPTS. CMPT. WIDTH
MPDR480-I
24
1 1⁄ 4"
16
1 3⁄ 4"
For drawer height 75
PART NO.
COMPTS. CMPT. WIDTH
MPDR482-I
23
1 3⁄ 4"
14
2 3⁄ 4"
Sliding accessory tray
For drawer heights 100 through 300
PART NO.
COMPTS. CMPT. WIDTH
MPDR-AT10-I 1
6"
8
3"
CMPT. SIZE
3" x 3"
3" x 6"
6" x 6"
71
Lista Nexus System
By equipping its workbenches
with the Nexus Accessory
System, Landmark Aviation took
its productivity to stratospheric
levels. The ability to have such
accessories as pegboard panels,
markerboards, overhead cabinets
and electrical outlets within easy
reach has improved both ergonomic comfort and efficiency.
HIGHLY FLEXIBLE, FULLY MODULAR SYSTEM FOR
PRODUCTIVE WORKSPACE
Lista Nexus System
Nexus System Features
Nexus System Frames
74
76
Nexus System Accessories
77
Nexus System Shelves
77
Nexus System Lighting Accessories
78
Nexus System Tool Rails, Power Options
79
Nexus System Plastic Box Rails, Back Stops
Nexus System Overhead Cabinets
80
81
Nexus System Pivoting Accessories
82
Nexus System Back Panels, Markerboard/Tackboards
Nexus System Easy-Order Combinations
Nexus System Packing Benches
83
84
86
Nexus System Packing Bench Features
87
Nexus System Packing Bench Legs and Accessories
88
Nexus System Packing Bench Easy-Order Combinations
Nexus System Stands and Trolleys
92
Nexus System Stand and Trolley Accessories
93
Nexus System Stand and Trolley Easy-Order Combinations
Nexus System Flow Racks
90
94
96
Nexus System Flow Rack Accessories
97
Nexus System Flow Rack Easy-Order Combinations
97
73
Nexus System Features
Lista’s Nexus System is a
highly functional and flexible
Nexus System benefits include:
Workstations equipped to
exactly suit your needs
system of above-worksurface
Greater productivity and
efficiency
accessories and modular com-
Extensive selection of heights and
ponents. It has been designed
widths, allowing you to configure
to cost-effectively meet the
your workspace to fit your needs.
Properly illuminated work area
Reduced strain, increased
ergonomic ease
Light fixtures can be easily posi-
• Accessories can be chosen and
positioned to best suit each user
for ultimate ergonomic adaptability.
and angle.
needs of a broad variety of jobs.
The system has been ergonomically designed, delivering
easy accessibility with no stretch
or strain, reducing the risk of
injury and increasing productivity.
Like all Lista systems, the
Nexus System is modular and
allows for easy reconfiguration.
• Many accessories can tilt and
pivot in a number of positions,
easily adjusting to the most
comfortable and useful position.
The wide choice of accessories
means that whatever the task, an
appropriate accessory is available.
tioned at the desired height, depth
Maximum available worksurface
Articulating arms mount to Nexus
uprights, leaving full surface available for task.
Overhead light fixture
Tool rail
Reversible markerboard/
tackboard
It can easily be adapted or
expanded to meet changing
Louvered panel
needs. It can also be retrofitted
to any existing workbench,
whether it’s from Lista or
another manufacturer. Many
Nexus components can be easily
adjusted for specific tasks
within a workshift. System
width is limited only by your
Nexus System accessories are
Adjustable shelf
not compatible with Arlink®
8000 or VSI uprights. For
Monitor shelf
Horizontal power rail
accessories for those systems,
see pages 22-28.
Back stop
worksurface length.
Accessory shelf
All components are available
in ESD paint for static-sensitive
applications.
Nexus System accessories
can also be used with our other
Nexus System products:
• Packing benches (page 86)
• Stationary stands (page 92)
• Mobile trolleys (page 92)
• Flow racks (page 96)
TO ORDER AN EASY-ORDER
COMBINATION (PRECONFIGURED NEXUS SYSTEM
ACCESSORIES), SEE PAGES
84-85.
74
Lista’s advanced Nexus System
enables the user to customize
the workspace for the greatest
productivity and ergonomic
comfort. Accessories can be easily added and moved to provide
complete flexibility and ease
of use.
75
Nexus System Frames
Building your ideal Nexus
STARTER SECTION WIDTH
ADDER SECTION WIDTH
accessory system is an easy
process. Simply select the
frames (starters and adders)
that fit your worksurface width,
Nexus Surface-Mount
Frames
then pick accessories of corresponding widths to mount on
the frames. Accessories are
easily moved and repositioned
as your needs change.
ADDER SECTION FRAME
STARTER SECTION FRAME
Frames are sturdy, heavy gauge steel,
and are notched front and back at 1"
increments for mounting accessories.
Starter frames consist of 2 upright
posts and a horizontal rail. Adder sets
consist of an additional upright and
horizontal rail. Uprights are available in
heights of 30" and 48", and 6 widths.
Foot plate is 2 3⁄4" x 4". Specify color
from chart on back cover.
30" High Surface-Mount Frames
Available Widths of Nexus Systems
The widths below represent measurements from frame center to frame center.
Uprights are 1 3⁄16" wide.
Using 1 Section
SECTION WIDTH
(CENTER-TO-CENTER)
24"
30"
36"
42"
48"
60"
OVERALL WIDTH
(FOOT-TO-FOOT)
26 3⁄4"
32 3⁄4"
38 3⁄4"
44 3⁄4"
50 3⁄4"
62 3⁄4"
MINIMUM WORKSURFACE LENGTH
30"
36"
42"
48"
54"
66"
INSIDE USEABLE
WIDTH
22 3⁄4"
28 3⁄4"
34 3⁄4"
40 3⁄4"
46 3⁄4"
58 3⁄4"
Using 1 Starter and 1 Adder Section
SECTION WIDTH
(CENTER-TO-CENTER)
24" + 24"
24" + 30"
24" + 36"
24" + 42"
24" + 48"
24" + 60"
30" + 30"
30" + 36"
30" + 42"
30" + 48"
30" + 60"
36" + 36"
36" + 42"
36" + 48"
36" + 60"
42" + 42"
42" + 48"
42" + 60"
48" + 48"
48" + 60"
60" + 60"
76
OVERALL WIDTH
(FOOT-TO-FOOT)
50 3⁄4"
56 3⁄4"
62 3⁄4"
68 3⁄4"
74 3⁄4"
86 3⁄4"
62 3⁄4"
68 3⁄4"
74 3⁄4"
80 3⁄4"
92 3⁄4"
74 3⁄4"
80 3⁄4"
86 3⁄4"
98 3⁄4"
86 3⁄4"
92 3⁄4"
104 3⁄4"
98 3⁄4"
110 3⁄4"
122 3⁄4"
MINIMUM WORKSURFACE LENGTH
54"
60"
66"
72"
78"
90"
66"
72"
78"
84"
96"
78"
84"
90"
102"
90"
96"
108"
102"
114"
126"
PART NO.
SEC. WIDTH CENT.-TO-CENT.
Starter set
NXF/SM2430
24"
NXF/SM3030
30"
NXF/SM3630
36"
NXF/SM4230
42"
NXF/SM4830
48"
NXF/SM6030
60"
Adder set
NXF/SM2430A
24"
NXF/SM3030A
30"
NXF/SM3630A
36"
NXF/SM4230A
42"
NXF/SM4830A
48"
NXF/SM6030A
60"
48" High Surface-Mount Frames
PART NO.
SEC. WIDTH CENT.-TO-CENT.
Starter set
NXF/SM2448
24"
NXF/SM3048
30"
NXF/SM3648
36"
NXF/SM4248
42"
NXF/SM4848
48"
NXF/SM6048
60"
Adder set
NXF/SM2448A
24"
NXF/SM3048A
30"
NXF/SM3648A
36"
NXF/SM4248A
42"
NXF/SM4848A
48"
NXF/SM6048A
60"
For rear-mount Nexus systems
for Align® Adjustable Height
Workstations, see page 37.
Nexus System Shelves
Shelves must match the
width of your chosen section
frame (see page 76).
Specify color from chart on
Adjustable Shelves
Shelf Dividers
Variable Angle Shelves
Adjustable, heavy gauge steel shelves
can be mounted parallel to the worksurface or at a 15° angle for easy,
ergonomic access. They have a 100 lb.
weight capacity for evenly distributed
loads. Shelves are reversible, with the
lip either at the front, or at the rear to
act as a back stop. Supports are
attached through a simple doublenotch system into slots on the uprights.
Steel dividers fit over the edge of
adjustable shelf when shelf is mounted
at 0°. Base of divider can be either to
left or right of divider upright. Painted
to match shelf.
Shelf adjusts from totally flat to a 25°
angle and has a capacity of 150 lbs. for
evenly distributed loads. Can be
mounted in a forward or set-back position between uprights for maximum
flexibility.
PART NO.
12" deep
NXS/A2412L
NXS/A3012L
NXS/A3612L
NXS/A4212L
NXS/A4812L
NXS/A6012L
15" deep
NXS/A2415L
NXS/A3015L
NXS/A3615L
NXS/A4215L
NXS/A4815L
NXS/A6015L
SHELF WIDTH SEC. WIDTH
23 1⁄2"
29 1⁄2"
35 1⁄2"
41 1⁄2"
47 1⁄2"
59 1⁄2"
24"
30"
36"
42"
48"
60"
23 1⁄2"
29 1⁄2"
35 1⁄2"
41 1⁄2"
47 1⁄2"
59 1⁄2"
24"
30"
36"
42"
48"
60"
PART NO.
HEIGHT
For 12" deep adjustable shelves
NXS/MD100-12/L
4"
NXS/MD100-12/R
4"
NXS/MD150-12/L
6"
NXS/MD150-12/R
6"
NXS/MD200-12/L
8"
NXS/MD200-12/R
8"
For 15" deep adjustable shelves
NXS/MD100-15/L
4"
NXS/MD100-15/R
4"
NXS/MD150-15/L
6"
NXS/MD150-15/R
6"
NXS/MD200-15/L
8"
NXS/MD200-15/R
8"
PART NO.
18" deep
NXS/V2418L
NXS/V3018L
NXS/V3618L
NXS/V4218L
NXS/V4818L
NXS/V6018L
24" deep
NXS/V2424L
NXS/V3024L
NXS/V3624L
NXS/V4224L
NXS/V4824L
back cover.
SHELF WIDTH SEC. WIDTH
22 1⁄2"
28 1⁄2"
34 1⁄2"
40 1⁄2"
46 1⁄2"
58 1⁄2"
24"
30"
36"
42"
48"
60"
22 1⁄2"
28 1⁄2"
34 1⁄2"
40 1⁄2"
46 1⁄2"
24"
30"
36"
42"
48"
77
Nexus System Lighting Accessories
Overhead Light Fixtures
• Fluorescent fixture is available in
2-bulb or 4-bulb model in 44" or
56" length.
• Tilts up or down 10°.
• Brackets allow light fixture to be
mounted to frame sections 30" to
90" wide.
• Kit includes switch and 8' grounded
electrical cord, support track, standard acrylic diffuser and T8 bulbs.
Requires NX/OHL-TR/BRK support brackets (see right).
• Fixture available in Light Gray only,
but brackets can be ordered in any
Lista color (see back cover for color
chart).
• Bracket with fixture can also simultaneously support tool rail (see
page 79).
Overhead Light Fixture Kits
PART NO.
2-bulb
NX/OHL-R48/2
NX/OHL-R60/2
NX/OHL-R72/2
NX/OHL-R78/2
NX/OHL-R84/2
NX/OHL-R90/2
4-bulb
NX/OHL-R48/4
NX/OHL-R60/4
NX/OHL-R72/4
NX/OHL-R78/4
NX/OHL-R84/4
NX/OHL-R90/4
FIXTURE
WIDTH
SECTION
WIDTH
44"
56"
56"
56"
56"
56"
30"-48"
49"-60"
61"-72"
73"-78"
79"-84"
85"-90"
44"
56"
56"
56"
56"
56"
30"-48"
49"-60"
61"-72"
73"-78"
79"-84"
85"-90"
Overhead Light Fixtures Only
PART NO.
NX/OHL44/2
NX/OHL44/4
NX/OHL56/2
NX/OHL56/4
78
BULBS
2
4
2
4
WIDTH
44"
44"
56"
56"
Overhead Light and Tool
Rail Support Brackets
Required for mounting overhead light
fixture. Brackets come in pairs. Specify
color (see back cover for color chart).
• 24" deep brackets can be used with
a 24" deep worksurface (either surface- or rear-mount* Nexus frames),
or a 30" deep worksurface with
surface-mount frames.
• 30" deep brackets can be used with
a 30" deep worksurface with rearmount frames, or a 36" deep worksurface (either surface- or rearmount frames).
*rear-mount frames only available with
Align® adjustable height bases
PART NO.
NX/OHL-TR/BRK24
NX/OHL-TR/BRK30
BRACKET DEPTH
24"
30"
Parabolic Diffusers for
Light Fixture
Optional chrome-plated plastic parabolic grid directs light onto worksurface
while eliminating glare on adjacent
workstations.
PART NO.
NX/OHL-PD44
NX/OHL-PD56
USE WITH
44" light fixture
56" light fixture
Undershelf Task Lights
Attach by magnet under shelves or
overhead cabinets. Includes white
acrylic wrap-around diffuser, switch,
6' cord and bulb.
PART NO.
FLF-18
FLF-36/UCF
FLF-48/UCF
SIZE
18" W x 5" D x 1 3⁄4" H
36" W x 5" D x 1 3⁄4" H
48" W x 5" D x 1 3⁄4" H
BULB
F15T8
F25T8
F32T8
Nexus System Tool Rails and Power Options
For items with choice of color,
Vertical Power
Strips
Tool Rails
The tool rail spans the length of the
worksurface. It is available in 48", 60"
or 72" lengths. Each tool rail has a 30
lb. capacity, and comes complete with
a trolley, 2 hangers, 2 endstops and 2
end caps in black finish. Balancer not
included. Requires support brackets
(see right). Fixture and bracket can
also simultaneously support overhead
light (see page 78). Color is black.
PART NO.
TR48
TR60
TR72
LENGTH
48"
60"
72"
Tool Rail and Overhead
Light Support Brackets
Required for mounting tool rail. Comes
in pairs.
PART NO.
NX/OHL-TR/BRK24
NX/OHL-TR/BRK30
The swing arm tool rail is 36" in length
and swings 180°. It has a 30 lb. capacity and includes a trolley, 1 endstop
and 1 end cap. Includes mounting
bracket. Balancer not included. Color
is black.
PART NO.
SWT36
LENGTH
36"
PART NO.
NXVPS/15
NXVPS/20
NXVPS/15GF
NXVPS/20GF
specify color from chart on back
cover.
DESCRIPTION
15 amp with 6 outlets
20 amp with 6 outlets
15 amp GFCI with 6 outlets
20 amp GFCI with 6 outlets
Single Uprights
Economical solution to
mounting power or articulating component above
the worksurface. Capacity
60 lbs.
PART NO.
NXF-P30/SM
NXF-P48/SM
Swing Arm Tool Rail
DEPTH
24"
30"
Mounts vertically to front
and back of upright.
Bracket and hardware supplied. Lighted on/off switch,
6' cord with grounded plug
and circuit breaker are
included. Fixture and brackets are black.
HEIGHT
30"
48"
Airhose
Attachment
Small bracket attaches
to frame upright.
Quick-connect fitting
not supplied.
PART NO.
NX/AHB
DESCRIPTION
bracket for air supply
Horizontal Power Rails
Self-contained, 6-plug electrical outlet
strip. Power rail pivots on axis, providing full horizontal adjustability. 110V,
15 amp or 20 amp circuit breaker.
PART NO.
15 amp
NXHPS/24-15
NXHPS/30-15
NXHPS/36-15
NXHPS/42-15
NXHPS/48-15
NXHPS/60-15
15 amp GFCI
NXHPS/24-15GF
NXHPS/30-15GF
NXHPS/36-15GF
NXHPS/42-15GF
NXHPS/48-15GF
NXHPS/60-15GF
20 amp
NXHPS/24-20
NXHPS/30-20
NXHPS/36-20
NXHPS/42-20
NXHPS/48-20
NXHPS/60-20
20 amp GFCI
NXHPS/24-20GF
NXHPS/30-20GF
NXHPS/36-20GF
NXHPS/42-20GF
NXHPS/48-20GF
NXHPS/60-20GF
79
Nexus System Plastic Box Rails and Back Stops
Plastic box rails and back
stops must match the width of
your chosen section frame (see
page 76).
Specify color from chart on
back cover.
Back Stops
Plastic Box Rails
The plastic box rail is easily adjustable
for ergonomic access. It can be mounted
parallel to the worksurface or at a 15°
angle. The rail is attached via a simple
double-notch system. It can hold
selected Lista or other boxes that have
hanger lips at the rear for attaching to
a louvered panel. Plastic boxes not
included.
PART NO.
WIDTH
NXBR/24
NXBR/30
NXBR/36
NXBR/42
NXBR/48
NXBR/60
24"
30"
36"
42"
48"
60"
MAXIMUM # OF
3" BOXES/RAIL
7
9
11
13
15
19
Plastic Boxes
Made of high impact polystyrene (HIPS)
red plastic, these boxes are for storing
small parts. Boxes slip in and out of
plastic box rails for easy loading and
dispensing and have label holder
attachments.
PART NO.
PB-5
PB-6
PB-7
PB-8
PB-9
PB-8D
80
WXDXH
3" x 3" x 2"
3" x 6" x 2"
6" x 6" x 2"
3" x 6" x 3"
6" x 6" x 3"
divider for PB-8
Prevents items from rolling off worksurface. 3" in height. Painted to match
frame.
PART NO.
NXBS/24
NXBS/30
NXBS/36
NXBS/42
NXBS/48
NXBS/60
USE WITH SECTION WIDTH
24"
30"
36"
42"
48"
60"
Nexus System Overhead Cabinets
For descriptions of overhead cabinets,
see our General Storage Catalog.
Overhead cabinet width must match
Nexus frame section width. Mounting
brackets must be ordered separately.
Overhead Cabinets
Brackets must be ordered for each
overhead cabinet used. Comes in
pairs.
PART NO.
NX/OHC-BRK16
NX/OHC-BRK29
How to order a Nexus
overhead cabinet
1. Select overhead cabinet based
on your choice of dimensions.
ND = no door
RD = retractable door
Doors for 29" high overhead
cabinets
HD
= hinged doors
HDP* = hinged doors with
steel-framed plexiglas
SD
= sliding doors
SDP** = sliding doors with
steel-framed plexiglas
FOR USE WITH
16" high cabinet
29" high cabinet
Lista overhead cabinets can
attach to a Nexus frame for
protected, secure above-worksurface storage of large, bulky
items.
Overhead Cabinet
Additional Shelves
(for 29" High Cabinets)
2. Select door type.
Door for 16" high overhead
cabinets
Overhead Cabinet Nexus
Mounting Brackets
16" high x 15" deep
Available either with retractable door
or no door.
PART NO.
OHC2416-
OHC3016-
OHC3616-
OHC4216-
OHC4816-
OHC6016-
WIDTH
24"
30"
36"
42"
48"
60"
13 1⁄2" deep
PART NO.
OHC-S24
OHC-S30
OHC-S36
OHC-S42
OHC-S48
FOR USE WITH
24" wide cabinet
30" wide cabinet
36" wide cabinet
42" wide cabinet
48" wide cabinet
*plexiglas doors available for
cabinets 30" and wider only
**plexiglas doors available for
cabinets 42" and wider only
3. Select lock type.
RG = individual
KA = keyed-alike
MA = master
4. Select paint color (see back
cover for color chart).
5. Order mounting brackets.
EXAMPLE: to order an OHC2416
overhead cabinet with a retractable
door, an individual lock, and Bright
Blue paint, the cabinet part number
would be OHC2416-RDRGBB,
and the mounting brackets would
be NX/OHC-BRK16.
29" high x 15" deep
Available either with hinged doors
(with or without plexiglas window),
sliding doors (with or without plexiglas
window) or no door.
PART NO.
OHC2429-
OHC3029-
OHC3629-
OHC4229-
OHC4829-
WIDTH
24"
30"
36"
42"
48"
81
Nexus System Pivoting Accessories
Articulating arms allow free
and simple repositioning of a
wide range of Nexus System
accessories. Arm swings 180°
Equipment Shelf
for easy ergonomic access, and
Holds a variety of customer-supplied
equipment or tools. 75 lb. capacity.
12 3⁄8" wide x 12 3⁄8" deep.
has a 75 lb. capacity. All accessories include arm and mounting bracket.
Specify color from chart on
back cover.
Monitor Shelf with
Keyboard Holder
PART NO.
NXA/ES
Document Holder
For displaying papers, plans, etc.
11 7⁄8" wide x 13 3⁄4" high. Includes lip
for pencils, pens, etc.
PART NO.
NXA/DH
Holds computer monitor. Includes
retractable wire keyboard holder. 75 lb.
capacity. 12 3⁄8" wide x 12 3⁄8" deep.
PART NO.
NXA/MS-KB
Accessory Shelf
For easy access to small tools, instruments, parts, etc. Ribbed mat optional.
21 1⁄4" wide x 7 3⁄8" deep. 75 lb.
capacity.
PART NO.
NXA/AS
NX/AS-MAT
DESCRIPTION
shelf
ribbed rubber mat
Large Document Holder
For displaying large documents, and
open binders and books. 23 5⁄8" wide x
13 3⁄4" high. Includes lip for pencils,
pens, etc.
PART NO.
NXA/DHW
Optional Mouse Tray
Mouse tray attaches to monitor shelf
with keyboard holder (above) to hold
computer mouse and/or mouse pad.
75 lb. capacity. 9 1⁄ 2" wide x 7 5⁄8"
deep. Ordered separately.
PART NO.
NX/MP
Flat Panel Monitor Arm
Bin Container
For attaching flat panel monitor to
Nexus upright. Accepts both 75mm and
100mm square monitor hole patterns.
17 1⁄ 2 lb. capacity. Includes bracket.
Holds 3 rows of plastic bins for easy
access to parts and components.
Interior space per shelf is 20" wide x
6" deep. Top shelf is 3 1⁄4" high, second and third shelves are 3 3⁄4" high.
Requires accessory shelf (left) for support (not included), or can be used freestanding. 50 lb. capacity. Does not
include bin boxes.
PART NO.
NXA/FPMA
Flat Panel
Monitor
Bracket
Galvanized steel flat
bracket for mounting
third party flat panel
monitor arms to
Nexus upright.
PART NO.
NX/BKT-FPM
82
PART NO.
NX/AS-BC
Nexus System Back Panels and Markerboard/Tackboards
Sturdy panels easily attach
between frame uprights. All
panels are available in heights
of 18" and 30".
Reversible markerboard/
Louvered Back Panels
tackboard attaches using same
Steel louvered panel is designed to
accommodate industry-standard plastic
boxes that feature louvered edge or lip.
brackets (available in 30" height
PART NO.
18" high
NXLP/2418
NXLP/3018
NXLP/3618
NXLP/4218
NXLP/4818
NXLP/6018
30" high
NXLP/2430
NXLP/3030
NXLP/3630
NXLP/4230
NXLP/4830
NXLP/6030
USE WITH SECTION WIDTH
24"
30"
36"
42"
48"
60"
24"
30"
36"
42"
48"
60"
only).
Pegboard Panels
Specify color from chart on
Steel pegboard panel accepts all standard pegging devices (i.e. hooks, etc.).
Pegboard holes are 1⁄4" in diameter.
Ideal for placement of commonly used
tools.
PART NO.
18" high
NXPP/2418
NXPP/3018
NXPP/3618
NXPP/4218
NXPP/4818
NXPP/6018
30" high
NXPP/2430
NXPP/3030
NXPP/3630
NXPP/4230
NXPP/4830
NXPP/6030
back cover.
USE WITH SECTION WIDTH
24"
30"
36"
42"
48"
60"
24"
30"
36"
42"
48"
60"
Reversible
Markerboard/Tackboards
Two-sided reversible board. Features
white magnetic markerboard on 1 side
and gray fabric tackboard on the other.
Also functions as privacy panel and
sound dampener. 30" high.
PART NO.
NXRMT/2430
NXRMT/3030
NXRMT/3630
NXRMT/4230
NXRMT/4830
USE WITH SECTION WIDTH
24"
30"
36"
42"
48"
Solid Privacy Panels
Steel privacy panel encloses a section
and can also be used to hold/display
items with magnets.
PART NO.
18" high
NXSP/2418
NXSP/3018
NXSP/3618
NXSP/4218
NXSP/4818
NXSP/6018
30" high
NXSP/2430
NXSP/3030
NXSP/3630
NXSP/4230
NXSP/4830
NXSP/6030
USE WITH SECTION WIDTH
24"
30"
36"
42"
48"
60"
24"
30"
36"
42"
48"
60"
83
Easy-Order Nexus System Combinations
Each combination includes 1 Nexus
starter frame and 1 adder frame at the
height shown. Combinations designated with “SM” surface mount to a
Lista or other workbench with a worksurface at least 6" longer than the
Nexus frames. Combinations designated with “RM” rear mount to a Lista
Align® adjustable height base only.
Certain combinations are available with
optional overhead lights (see charts
below illustrations for availability).
How to order an Easy-Order
Nexus Accessory Combination
1. Select Easy-Order Nexus
Accessory configuration.
2. Select worksurface length.
60 = 60" long (combination
consists of 24" wide starter
frame and 30" wide adder
frame)
72 = 72" long (combination
consists of 30" wide starter
frame and 36" wide adder
frame)
30" High Nexus Frames
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Includes:
Includes:
Includes:
• (2) 12" deep shelves
• (1) back stop
• (1) 30" high louvered panel
•
•
•
•
•
•
•
•
PART NO.
NXC/SM3001-
DESCRIPTION
surface-mount
(2) 12" deep shelves
(1) plastic box rail
(1) 30" high markerboard/tackboard
(1) vertical power strip
PART NO.
NXC/SM3002-
DESCRIPTION
surface-mount
(2) 12" deep shelves
(1) back stop
(1) 18" high solid privacy panel
(1) 16" high overhead cabinet with
retractable door
PART NO.
NXC/SM3023-
DESCRIPTION
surface-mount
3. Select paint color. For color
chart, see back cover or below.
4. Select lock type for models
with overhead cabinets included.
EXAMPLE: to order an NXC/SM4827
Nexus combination to install on a 72"
long worksurface, with Bright Blue
paint and keyed-alike locks for the
overhead cabinets, the part number
would be NXC/SM4827-72BBKA.
Includes:
Includes:
Includes:
• (2) 12" deep shelves
• (2) 15" deep shelves
• (2) back stops
• (2) 18" deep variable angle shelves
• (1) 12" deep shelf
• (1) 18" high louvered panel
PART NO.
NXC/SM3005-
PART NO.
NXC/SM3006-
• (1) 12" deep shelf
• (1) 18" high louvered panel
• (1) 16" high overhead cabinet with
retractable door
• (1) horizontal power rail
• (1) back stop
DESCRIPTION
surface-mount
DESCRIPTION
surface-mount
PART NO.
NXC/SM3024-
84
RG = individual
KA = keyed-alike
MA = master
-------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------
DESCRIPTION
surface-mount
BE (Beige paint) BB (Bright Blue paint) BK (Black paint) CB (Classic Blue paint) GR (Dark Gray paint)
48" High Nexus Frames
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
•••••••••••••••••••••••
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------
Includes:
Includes:
Includes:
Includes:
•
•
•
•
•
•
•
•
•
• (2) 12" deep shelves
• (1) 18" high louvered panel
• (1) 16" high overhead cabinet with
retractable door
• (1) 30" high markerboard/
tackboard
• (2) 16" high overhead cabinets with
retractable doors
• (1) 12" deep shelf
• (1) back stop
• (1) 30" high markerboard/
tackboard
PART NO.
NXC/SM4823-
NXC/RM4823-
PART NO.
NXC/SM4827-
NXC/RM4827-
(2) 12" deep shelves
(1) 15" deep shelf
(1) back stop
(1) 18" high pegboard panel
(1) 30" high louvered panel
PART NO.
DESCRIPTION
NXC/SM4801-
surface-mount
NXC/SM4811-
surface-mount with 56"
4-bulb overhead light
NXC/RM4801-
rear-mount for Align base
NXC/RM4811-
rear-mount for Align
base with 56" 4-bulb
overhead light
(2) 12" deep shelves
(1) 15" deep shelf
(1) back stop
(1) 30" high markerboard/
tackboard
• (1) 18" high louvered panel
• (1) vertical power strip
PART NO.
DESCRIPTION
NXC/SM4802-
surface-mount
NXC/SM4812-
surface-mount with 56"
4-bulb overhead light
NXC/RM4802-
rear-mount for Align base
NXC/RM4812-
rear-mount for Align
base with 56" 4-bulb
overhead light
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DESCRIPTION
surface-mount
rear-mount for
Align base
DESCRIPTION
surface-mount
rear-mount for
Align base
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Includes:
Includes:
Includes:
Includes:
• (4) 12" deep shelves
• (2) 15" deep shelves
• (2) back stops
•
•
•
•
• (2) 12" deep shelves
• (2) 30" high louvered panels
• (2) 16" high overhead cabinets with
retractable doors
• (1) 30" high markerboard/
tackboard
• (1) 30" high louvered panel
PART NO.
DESCRIPTION
NXC/SM4804-
surface-mount
NXC/SM4814-
surface-mount with 56"
4-bulb overhead light
NXC/RM4804-
rear-mount for Align base
NXC/RM4814-
rear-mount for Align
base with 56" 4-bulb
overhead light
(2) 12" deep shelves
(1) 15" deep shelf
(1) back stop
(1) 16" high overhead cabinet with
retractable door
• (1) 30" high louvered panel
PART NO.
NXC/SM4825-
NXC/RM4825-
DESCRIPTION
surface-mount
rear-mount for
Align base
PART NO.
DESCRIPTION
NXC/SM4806-
surface-mount
NXC/SM4816-
surface-mount with 56"
4-bulb overhead light
NXC/RM4806-
rear-mount for Align base
NXC/RM4816-
rear-mount for Align
base with 56" 4-bulb
overhead light
GG (Green paint) LG (Light Gray paint) NR (Red paint) SN (Sand paint) FW (White paint)
PART NO.
NXC/SM4828-
NXC/RM4828-
DESCRIPTION
surface-mount
rear-mount for
Align base
85
Nexus System Packing Bench Accessories
If you need to pack and ship
products, and you want to get
the job done quickly and efficiently, Lista delivers the complete package you’ve been
looking for. Our advanced,
modular benches are specifically
designed for packing and
shipping applications. Fully
customizable, they will accommodate your needs today and
in the future.
Lista’s packing and shipping
benches bundle together an
array of superior features and
benefits. Extremely flexible, the
benches come in a variety of
lengths (48" to 96") and depths
and are available with a wide
selection of worksurfaces,
including butcher block, Lista
Top, and galvanized or stainless
steel over wood.
The addition of the Nexus
System and its wide array of
accessories means that your
packing benches can be customized to exactly suit your
needs, without a custom price.
TO ORDER AN EASY-ORDER
COMBINATION (PRECONFIGURED NEXUS SYSTEM
PACKING BENCH), SEE
PAGES 90-91.
86
Nexus System Packing Bench Accessory Features
Our packing benches can be
Above the worksurface, Lista’s
configured with cabinet bases or
modular Nexus System provides a
legs to create a cost-effective,
full range of accessories that offer
custom solution. With our modular
easy access to packing materials at
drawer storage cabinets doubling as
arm height. There are holders for
pedestals, users have systematic,
rolls of paper, bubble rolls and
efficient storage for their supplies,
labels. Vertical wire dividers are
tools, paperwork and accessories.
available to keep shelf storage orga-
Beneath the worksurface,
nized. Other Nexus accessories
vertical wire shelf dividers provide
include louvered panels to hold bins,
custom storage for corrugated or
plastic box rails, electrical attach-
other bulk materials.
ments, overhead cabinets, computer
monitor trays, document holders
and many more (see pages 77-83).
Adjustable shelves with
or without vertical wire
dividers
Roll holder for tape
and labels
Louvered panel for
plastic bins
Roll holder for large rolls
Vertical power strip
Back stop
Choice of worksurfaces
Legs to
accommodate shelves
Cabinet pedestals in a
variety of widths and
configurations
Variety of shelf lengths
87
Nexus System Packing Bench Below-Worksurface Accessories
Packing benches can be
designed using a full range of
Lista workbench products:
• Technical workstation components, pages 42-43
Bottom Shelves
Heavy gauge steel shelf, 16" deep.
Pre-punched holes accept vertical wire
dividers. Applications using more
than one bottom shelf and at least
one leg support require packing
bench leg insert(s) (see left).
• Industrial workbench components, pages 56-57
• Cabinet pedestals,
pages 60-71
• Nexus System accessories,
pages 76-85
The additional components
shown on the following two
pages enable you to equip a
packing bench that exactly suits
your needs.
Packing Bench Leg Inserts
For use with either tech or industrial
legs. Allows multiple shelves and/or a
roll holder to be mounted between
legs. Not needed for applications using
only one bottom shelf.
PART NO.
WBPBB-27.5
WBPBB-29.5
WBPBB-31.5
WBPBB-33.5
FOR LEG
HEIGHT
27.5"
29.5"
31.5"
33.5"
WBPBB-35.5
WBPBB-39.5
35.5"
39.5"
USE WITH
CAB. HEIGHT
600 w / o base
600 with 2" base
600 with 4" base
600 with 6" base
or 750 w / o base
750 with 2" base
900 w / o base
PART NO.
BS-4816 II
BS-6016 II
BS-7216 II
BS-8416 II
BS-9616 II
WORKSURFACE LENGTH
48"
60"
72"
84"
96"
How to order a packing
bench bottom shelf
1. Select part number based on
worksurface length.
2. I Specify left-hand (facing the
workbench) bench support.
TL
LL
NW
MP
=
=
=
=
Tech Leg
Lista Leg
NW cabinet
MP cabinet
3. I Specify right-hand (facing
the workbench) bench support.
TL
LL
NW
MP
=
=
=
=
Tech Leg
Lista Leg
NW cabinet
MP cabinet
EXAMPLE: to order a bottom shelf
for a packing bench with a 72"
worksurface, an MP Width cabinet
as the left-hand pedestal and a Tech
Leg as the right-hand support, the
part number would be
BS-7216MPTL.
Vertical Wire
Dividers for
Bottom
Shelves
15" deep dividers
are 1⁄4" diameter
galvanized wire that fit into prepunched holes in the 16" deep shelf.
No hardware required.
PART NO.
NXS/WD150-15
NXS/WD250-15
NXS/WD450-15
88
HEIGHT
6"
10"
18"
Roll Holders (Leg/Cabinet
Mount)
For dispensing paper, bubble rolls, etc.
Holder mounts between tech panel
legs, industrial panel legs and/or cabinet pedestals. Includes 1" diameter rod
and brackets (unpainted galvanized
steel). 100 lb. weight capacity.
Applications using at least one leg
support require packing bench leg
insert(s) (see left). Usable width
varies by configuration. Contact Lista
for exact dimensions.
PART NO.
RH-48 I I
RH-60 I I
RH-72 I I
RH-84 I I
RH-96 I I
WORKSURFACE LENGTH
48"
60"
72"
84"
96"
How to order a packing bench
below-worksurface roll holder
1. Select part number based on
worksurface length.
2. I Specify left-hand (facing the
workbench) bench support.
TL
LL
NW
MP
=
=
=
=
Tech Leg
Lista Leg
NW cabinet
MP cabinet
3. I Specify right-hand (facing
the workbench) bench support.
TL
LL
NW
MP
=
=
=
=
Tech Leg
Lista Leg
NW cabinet
MP cabinet
EXAMPLE: to order a roll holder for
a packing bench with a 72" worksurface, an MP Width cabinet as the
left-hand pedestal and a Tech Leg as
the right-hand support, the part
number would be RH-72MPTL.
Nexus System Packing Bench Above-Worksurface Accessories
For Nexus system frames, see
page 76. Specify color from
chart on back cover.
Adjustable Shelves
Without Lip
Adjustable steel shelf has a 100 lb.
weight capacity. Supports are attached
through a simple double-notch system
that insert into slots on the Nexus
uprights. Available in depths of 12"
and 15". Pre-punched holes accept
vertical wire dividers (see below).
PART NO.
12" deep
NXS/A2412D
NXS/A3012D
NXS/A3612D
NXS/A4212D
NXS/A4812D
NXS/A6012D
15" deep
NXS/A2415D
NXS/A3015D
NXS/A3615D
NXS/A4215D
NXS/A4815D
NXS/A6015D
SHELF WIDTH
24"
30"
36"
42"
48"
60"
24"
30"
36"
42"
48"
60"
Deep Shelves Without Lip
Shelves are 18" or 24" deep with a
150 lb. weight capacity. Can be
mounted in a forward or set-back position between uprights for maximum
flexibility. Pre-punched holes accept
vertical wire dividers (see below).
PART NO.
18" deep
NXS/V2418D
NXS/V3018D
NXS/V3618D
NXS/V4218D
NXS/V4818D
NXS/V6018D
24" deep
NXS/V2424D
NXS/V3024D
NXS/V3624D
NXS/V4224D
NXS/V4824D
SHELF WIDTH
24"
30"
36"
42"
48
60"
Roll Holders (Extended
Mount)
For dispensing paper, bubble rolls, etc.
Includes 1" diameter rod and brackets.
Brackets mount to Nexus uprights and
extend 3" forward from the face of the
uprights to allow for larger diameter
rolls. Rod is unpainted galvanized steel;
brackets are painted to match frame.
100 lb. weight capacity.
PART NO.
NXRH/E24
NXRH/E30
NXRH/E36
NXRH/E42
NXRH/E48
NXRH/E60
24"
30"
36"
42"
48
USE WITH
SECTION WDTH.
24"
30"
36"
42"
48"
60"
USB. INSIDE
WIDTH
22"
28"
34"
40"
46"
58"
Label/Roll Holders (Interior
Mount)
Vertical Wire Dividers for
Adjustable Shelves
Dividers are 1⁄4" diameter galvanized
wire that fit into pre-punched holes in
the shelf. No hardware required. Depth
must match shelf depth.
PART NO.
For 12" deep shelves
NXS/WD150-12
NXS/WD250-12
NXS/WD450-12
For 15" deep shelves
NXS/WD150-15
NXS/WD250-15
NXS/WD450-15
HEIGHT
6"
10"
18"
6"
10"
18"
Vertical Wire Dividers for
Deep Shelves
Dividers are 1⁄4" diameter galvanized
wire that fit into pre-punched holes in
the shelf. No hardware required. Depth
must match shelf depth.
PART NO.
For 18" deep shelves
NXS/WD150-18
NXS/WD250-18
NXS/WD450-18
For 24" deep shelves
NXS/WD150-24
NXS/WD250-24
NXS/WD450-24
HEIGHT
6"
10"
18"
For dispensing labels and other smaller
rolls. Brackets mount flush between
Nexus uprights. Includes 1" diameter
rod and brackets. Rod is unpainted galvanized steel; brackets are painted to
match frame. 100 lb. weight capacity.
PART NO.
NXRH/C24
NXRH/C30
NXRH/C36
NXRH/C42
NXRH/C48
NXRH/C60
USE WITH
SECTION WDTH.
24"
30"
36"
42"
48"
60"
USB. INSIDE
WIDTH
22"
28"
34"
40"
46"
58"
6"
10"
18"
Nexus stands and trolleys can be
configured with Nexus packing
bench accessories to make an
ideal addition to any packing or
shipping area. See pages 92-95.
89
Easy-Order Nexus System Packing Bench Combinations
The packing benches shown on the following two pages are pre-configured to
include the most popular and versatile
styles of packing benches we offer. To
design a custom bench to suit your
exact needs, see pages 88-89.
Easy-Order packing benches include
technical panel legs, and are 33 1⁄2"
high. Optional Nexus System packing
bench combinations are 48" high.
How to order an Easy-Order
Packing Bench
1. Select Easy-Order packing
bench configuration.
Single Bay Packing Benches
FRONT VIEW
SIDE VIEW
2. I Select worksurface style.
5" HIGH HANGING CABINET
LTS = Lista Top
GLS = Galvanized steel
BTS = Butcher block
All worksurfaces have a standard square edge and are 30"
deep.
BOTTOM SHELF
BOTTOM SHELF
PART NO.
PS6000-III
I
INCLUDES
WBHC150-1 hanging cabinet
3. I Select worksurface size.
4830 = 48" long x 30" deep
6030 = 60" long x 30" deep
7230 = 72" long x 30" deep
5" HIGH HANGING CABINET
4. I Select paint color. For color
chart, see back cover.
How to order an optional
Easy-Order Nexus System
Packing Bench Combination
WIRE DIVIDERS
BOTTOM SHELF
PART NO.
PS6100-III
I
INCLUDES
WBHC150-1 hanging cabinet
1. Select Easy-Order Nexus
System configuration.
ROLL HOLDER
2. I Select system length
(length must correspond to worksurface length as shown below).
42 = for 48" long worksurface
48 = for 60" long worksurface
60 = for 72" long worksurface
PART NO.
PS6200-III
I
4. I Select paint color. For color
chart, see back cover.
EXAMPLE: to order a PS6200
packing bench with a 72" long
butcher block worksurface and a
matching Nexus System combination with Bright Blue paint, the
bench part number would be
PS6200-BTS7230BB, and the
Nexus System part number would
be NXC/SM48-PB01-60BB.
3" HIGH DRAWER
7" HIGH DRAWER
FILE DRAWER
WIRE DIVIDERS
BOTTOM SHELF
6" BASE
PART NO.
PS6300-III
I
INCLUDES
NW0600-0303N-F6RG cabinet
Optional Nexus System Packing Bench Combination
STARTER UPRIGHTS
WIRE DIVIDERS
ADJUSTABLE SHELF
HORIZONTAL RAIL
ADJUSTABLE SHELF
ROLL HOLDER
-----------------------------------------------------------------------------------------------------------------------------------------------------------------PART NO.
NXC/SM48-PB01-II
I
90
LOUVERED PANEL
HEIGHT
48"
I BE (Beige paint) I BB (Bright Blue paint) I BK (Black paint) I CB (Classic Blue paint) I GR (Dark Gray paint)
Long Packing Benches
How to order a long
Easy-Order Packing Bench
FRONT VIEW
SIDE VIEW
1. Select Easy-Order packing
bench configuration.
2. I Select worksurface style.
ROLL
HOLDER
WIRE DIVIDERS
BOTTOM SHELF
PART NO.
PS6400-III
I
ROLL HOLDER LENGTH
72" top: 36" long; 84" & 96" top: 48" long
BOTTOM SHELF LENGTH
72" & 84" top: 24 1⁄4" long; 96" top: 36 1⁄4" long
LTS = Lista Top
GLS = Galvanized steel
BTS = Butcher block
All worksurfaces have a standard square edge and are 30"
deep.
3. I Select worksurface size.
5" HIGH HANGING CABINET
BOTTOM SHELF
WIRE DIVIDERS
BOTTOM SHELF
BOTTOM SHELF
PART NO.
PS6500-III
I
INCLUDES
WBHC150-1 hanging cabinet
BOTTOM SHELF LENGTH
all shelves are equal length
3" HIGH DRAWER
7" HIGH DRAWER
BOTTOM SHELF
7230 = 72" long x 30" deep
8430 = 84" long x 30" deep
9630 = 96" long x 30" deep
4. I Select paint color. For color
chart, see back cover.
How to order an optional
Easy-Order Nexus System
Packing Bench Combination
1. Select Easy-Order Nexus
System configuration.
FILE DRAWER
BOTTOM SHELF
6" BASE
PART NO.
PS6600-III
I
66 = for 72" long worksurface
78 = for 84" long worksurface
90 = for 96" long worksurface
INCLUDES
NW0600-0303N-F6RG cabinet
2" HIGH DRAWER
2" HIGH DRAWER
3" HIGH DRAWER
FILE DRAWER
5" HIGH DRAWER
FILE DRAWER
7" HIGH DRAWER
WIRE DIVIDERS
BOTTOM SHELF
6" BASE
6" BASE
PART NO.
PS6700-III
I
2. I Select system length
(length must correspond to worksurface length as shown below).
INCLUDES
NW0600-0501N-F6RG and NW0600-0201N-F6RG cabinets
Optional Nexus System Packing Bench Combination
4. I Select paint color. For color
chart, see back cover.
EXAMPLE: to order a PS6600
packing bench with an 84" long
butcher block worksurface and a
matching Nexus System combination with Bright Blue paint, the
bench part number would be
PS6600-BTS8430BB, and the
Nexus System part number would
be NXC/SM48-PB02-78BB.
STARTER AND ADDER UPRIGHTS
HORIZONTAL RAIL
WIRE DIVIDERS
ADJUSTABLE SHELF
HORIZONTAL RAIL
WIRE DIVIDERS
ADJUSTABLE SHELF
ADJUSTABLE SHELF
ROLL HOLDER
LOUVERED PANEL
PART NO.
NXC/SM48-PB02-II
I
HEIGHT
48"
------------------------------------------------------------------------------STARTER SECTION WIDTH
42"
ADJUSTABLE SHELF
ROLL HOLDER
BACK STOP
ADDER SECTION WIDTHS
24" for 72" worksurface, 36" for 84" worksurface, 48" for 96" worksurface
I GG (Green paint) I LG (Light Gray paint) I NR (Red paint) I SN (Sand paint) I FW (White paint)
91
Nexus System Stationary Stands and Mobile Trolleys
heights (48", 60", 72" and 84")
complement to any production,
and six widths (24", 30", 36", 42",
repair or assembly workspace.
48" and 60"). Trolleys are available
Hold and/or transport parts,
in the same widths, and in heights
tools, test equipment and
of 48" and 60" (casters add an
almost anything else you can
additional 6" to overall height).
of a small footprint.
Designed to accept all Nexus
Stands and trolleys can be
ordered in either rear-justified or
center-justified configurations.
System accessories, these mini-
Add a worksurface, and your
workstations can be configured
Nexus stand becomes an economi-
to exactly suit your needs. For
cal workbench.
the complete range of Nexus
For weight capacities for station-
accessories, see pages 77-83:
ary stands and mobile trolleys,
• Shelves, page 77
contact Lista Customer Service.
• Lights, page 78
• Power, page 79
• Pivoting accessories, page 82
Full range of Nexus System
accessories available
Create work areas using
either Nexus shelves or
worksurfaces
Center- or rear-justified
Mobile trolleys or
stationary stands
®
mobile trolleys are the perfect
think of, with the convenience
92
Stands are available in four
6"
®
Nexus stationary stands and
®
28"
®
®
28"
®
® 6"®
®
34"
®
®
34"
®
® 6"®
REAR-JUSTIFIED
STAND OR TROLLEY
CENTER-JUSTIFIED
STAND OR TROLLEY
FOR 24" DEEP
WORKSURFACE
FOR 12" DEEP
SHELVES
NEXUS CNC TOOL STANDS AND
TROLLEYS
For Nexus system CNC tool
stands and trolleys, see our
General Storage Catalog.
REAR-JUSTIFIED
CENTER-JUSTIFIED
STAND OR TROLLEY STAND OR TROLLEY
FOR 30" DEEP
WORKSURFACE
FOR 15" DEEP
SHELVES
60" High Rear-Justified Frames
Nexus Mobile
Trolley Frames
64 3⁄4" OAH, 54" available for panels
PART NO.
Starter set
NXF/FSR2460-I
NXF/FSR3060-I
NXF/FSR3660-I
NXF/FSR4260-I
NXF/FSR4860-I
NXF/FSR6060-I
Adder set
NXF/FSR2460A-I
NXF/FSR3060A-I
NXF/FSR3660A-I
NXF/FSR4260A-I
NXF/FSR4860A-I
NXF/FSR6060A-I
60" High Center-Justified
Frames
64 3⁄4" OAH, 54" available for panels
Nexus Stationary Stand
Frames
Nexus stand frames consist of 2 upright
posts and 2 horizontal rails, with 2 feet.
Adder sets consist of an additional
upright and 2 horizontal rails with 1
foot. Frames are sturdy, heavy gauge
steel, and are notched front and back
at 1" increments for mounting accessories. Includes 4 adjustable glides.
Specify stand depth in place of blue box
(I) in part number.
28 = 28" overall depth
34 = 34" overall depth
48" High Rear-Justified Frames
52 3⁄4" OAH, 42" available for panels
PART NO.
Starter set
NXF/FSR2448-I
NXF/FSR3048-I
NXF/FSR3648-I
NXF/FSR4248-I
NXF/FSR4848-I
NXF/FSR6048-I
Adder set
NXF/FSR2448A-I
NXF/FSR3048A-I
NXF/FSR3648A-I
NXF/FSR4248A-I
NXF/FSR4848A-I
NXF/FSR6048A-I
48" High Center-Justified
Frames
52
3⁄4"
OAH, 42" available for panels
PART NO.
Starter set
NXF/FSC2448-I
NXF/FSC3048-I
NXF/FSC3648-I
NXF/FSC4248-I
NXF/FSC4848-I
NXF/FSC6048-I
Adder set
NXF/FSC2448A-I
NXF/FSC3048A-I
NXF/FSC3648A-I
NXF/FSC4248A-I
NXF/FSC4848A-I
NXF/FSC6048A-I
PART NO.
Starter set
NXF/FSC2460-I
NXF/FSC3060-I
NXF/FSC3660-I
NXF/FSC4260-I
NXF/FSC4860-I
NXF/FSC6060-I
Adder set
NXF/FSC2460A-I
NXF/FSC3060A-I
NXF/FSC3660A-I
NXF/FSC4260A-I
NXF/FSC4860A-I
NXF/FSC6060A-I
72" High Rear-Justified Frames
76 3⁄4" OAH, 66" available for panels
PART NO.
Starter set
NXF/FSR2472-I
NXF/FSR3072-I
NXF/FSR3672-I
NXF/FSR4272-I
NXF/FSR4872-I
NXF/FSR6072-I
Adder set
NXF/FSR2472A-I
NXF/FSR3072A-I
NXF/FSR3672A-I
NXF/FSR4272A-I
NXF/FSR4872A-I
NXF/FSR6072A-v
72" High Center-Justified
Frames
76 3⁄4" OAH, 66" available for panels
PART NO.
Starter set
NXF/FSC2472-I
NXF/FSC3072-I
NXF/FSC3672-I
NXF/FSC4272-I
NXF/FSC4872-I
NXF/FSC6072-I
Adder set
NXF/FSC2472A-I
NXF/FSC3072A-I
NXF/FSC3672A-I
NXF/FSC4272A-I
NXF/FSC4872A-I
NXF/FSC6072A-I
84" High Rear-Justified Frames
88 3⁄4" OAH, 78" available for panels
PART NO.
Starter set
NXF/FSR2484-I
NXF/FSR3084-I
NXF/FSR3684-I
NXF/FSR4284-I
NXF/FSR4884-I
NXF/FSR6084-I
Adder set
NXF/FSR2484A-I
NXF/FSR3084A-I
NXF/FSR3684A-I
NXF/FSR4284A-I
NXF/FSR4884A-I
NXF/FSR6084A-I
84" High Center-Justified
Frames
88 3⁄4" OAH, 78" available for panels
PART NO.
Starter set
NXF/FSC2484-I
NXF/FSC3084-I
NXF/FSC3684-I
NXF/FSC4284-I
NXF/FSC4884-I
NXF/FSC6084-I
Adder set
NXF/FSC2484A-I
NXF/FSC3084A-I
NXF/FSC3684A-I
NXF/FSC4284A-I
NXF/FSC4884A-I
NXF/FSC6084A-I
Worksurfaces
For descriptions, see page 42. To order
a bullnose edge, add “BN” to the end
of the part number. Requires worksurface brackets (see below). For
use with rear-justified frames only.
PART NO.
Butcher block
BTOP-2424
BTOP-3024
BTOP-3624
BTOP-4224
BTOP-4824
BTOP-6024
BTOP-30
BTOP-36
BTOP-42
BTOP-48
BTOP-60
Plastic laminate
PTOP-2424
PTOP-3024
PTOP-3624
PTOP-4224
PTOP-4824
PTOP-6024
PTOP-30
PTOP-36
PTOP-42
PTOP-48
PTOP-60
SIZE
24" long x 24" deep
30" long x 24" deep
36" long x 24" deep
42" long x 24" deep
48" long x 24" deep
60" long x 24" deep
30" long x 30" deep
36" long x 30" deep
42" long x 30" deep
48" long x 30" deep
60" long x 30" deep
24" long x 24" deep
30" long x 24" deep
36" long x 24" deep
42" long x 24" deep
48" long x 24" deep
60" long x 24" deep
30" long x 30" deep
36" long x 30" deep
42" long x 30" deep
48" long x 30" deep
60" long x 30" deep
Worksurface Brackets
Required to attach worksurface (above)
to stationary stand. Includes 2 brackets.
For use with rear-justified frames
only.
PART NO.
NX/WST-KIT/24
NX/WST-KIT/30
FOR USE WITH
24" deep worksurface
30" deep worksurface
Nexus trolley frames
consist of 2 upright
posts and 2 horizontal rails, with 2 feet.
Frames are sturdy,
heavy gauge steel,
and are notched front
and back at 1" increments for mounting accessories. Supported by (4) 5"
diameter casters, 2 swivel and 2 swivel
with wheel locks. Includes a handle.
48" High Rear-Justified Frames
57 3⁄4" OAH, 42" available for panels
PART NO.
NXF/MTR2448-I
NXF/MTR3048-I
NXF/MTR3648-I
NXF/MTR4248-I
NXF/MTR4848-I
NXF/MTR6048-I
WIDTH
24"
30"
36"
42"
48"
60"
48" High Center-Justified Frames
PART NO.
NXF/MTC2448-I
NXF/MTC3048-I
NXF/MTC3648-I
NXF/MTC4248-I
NXF/MTC4848-I
NXF/MTC6048-I
WIDTH
24"
30"
36"
42"
48"
60"
60" High Rear-Justified Frames
69 3⁄4" OAH, 54" available for panels
PART NO.
NXF/MTR2460-I
NXF/MTR3060-I
NXF/MTR3660-I
NXF/MTR4260-I
NXF/MTR4860-I
NXF/MTR6060-I
WIDTH
24"
30"
36"
42"
48"
60"
60" High Center-Justified Frames
PART NO.
NXF/MTC2460-I
NXF/MTC3060-I
NXF/MTC3660-I
NXF/MTC4260-I
NXF/MTC4860-I
NXF/MTC6060-I
WIDTH
24"
30"
36"
42"
48"
60"
Mobile Trolley
Accessories
Individual casters
replace the ones that
come with trolley.
Handle is single handle.
PART NO.
CAST5X1S-NB
CAST5X1S-WB
NX/MT-HANDL
DESCRIPTION
(1) swivel 5" caster
(1) swivel 5" caster with
wheel lock
side handle
93
Easy-Order Nexus System Stands and Trolleys
Easy-Order stands (page 94) include
leveling glides, and are 60", 72" or
84" high. Trolleys (page 95) include
2 swivel and 2 swivel with wheel locks
3 1⁄2" diameter casters (250 lb. capacity per caster), and a handle, and are
either 48" or 60" high (plus height of
casters). Stands and trolleys are 28"
deep.
Front View
Side View
Rear-justified
Rear-justified
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
12" DEEP ADJUSTABLE SHELF
30" HIGH LOUVERED PANEL
12" DEEP ADJUSTABLE SHELF
BIN RAIL
How to order an Easy-Order
Nexus Stand or Trolley
BACK STOP
WORKSURFACE
BACK STOP
WORKSURFACE
1. Select Easy-Order stand or
trolley configuration.
2. I Select worksurface style
for models NXF/FSR01, NXF/FSR02,
NXF/FSR03 and NXF/FSR04.
P2 = Plastic laminate
B2 = Butcher block
Workstand
®
Workstand
PART NO.
NXF/FSR01I - III
I
NXF/FSR01I - III
IA
DESCRIPTION
starter
adder
PART NO.
NXF/FSR02I - III
I
NXF/FSR02I - III
IA
28"
DESCRIPTION
starter
adder
®
® 6" ®
All worksurfaces have a bullnose
front edge and are 24" deep.
3. I Select width.
24 =
30 =
36 =
42 =
48 =
60* =
18" DEEP VARIABLE ANGLE SHELF
24" wide
30" wide
36" wide
42" wide
48" wide
60" wide
30" HIGH MARKER/TACKBOARD
18" DEEP VARIABLE ANGLE SHELF
BACK STOP
WORKSURFACE
BACK STOP
WORKSURFACE
*not available for models that
include markerboard/tackboard
4. I Select height.
For stands:
60 = 60" high
72 = 72" high
84 = 84" high
Workstand
®
Workstand
PART NO.
NXF/FSR03I - III
I
NXF/FSR03I - III
IA
DESCRIPTION
starter
adder
PART NO.
NXF/FSR04I - III
I
NXF/FSR04I - III
IA
28"
®
® 6" ®
DESCRIPTION
starter
adder
For trolleys:
48 = 48" high
60 = 60" high
5. I Select paint color. For color
chart, see back cover or below.
EXAMPLE: to order an NXF/FSR04
stand that is 36" wide and 60" high,
with a butcher block worksurface and
Bright Blue paint, the part number
would be NXF/FSR04B2-3660BB.
30" HIGH MARKER/TACKBOARD
30" HIGH LOUVERED PANEL
BIN RAIL
15 AMP HORIZONTAL POWER RAIL
Companion Stand
PART NO.
NXF/FSR05-III
I
NXF/FSR05-III
IA
94
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
®
Companion Stand
DESCRIPTION
starter
adder
PART NO.
NXF/FSR06-III
I
NXF/FSR06-III
I
DESCRIPTION
starter
adder
28"
®
® 6" ®
I BE (Beige paint) I BB (Bright Blue paint) I BK (Black paint) I CB (Classic Blue paint) I GR (Dark Gray paint)
Front View
Side View
Front View
Side View
Rear-justified
Rear-justified
Center-justified
Center-justified
18" DEEP VARIABLE ANGLE SHELF
12" DEEP ADJUSTABLE SHELF
®
30" HIGH MARKER/TACKBOARD
®
30" HIGH MARKER/TACKBOARD
6"
®
®
6"
®
Trolley
28"
PART NO.
NXF/MTR07-III
I
®
®
Trolley
28"
®
• Includes (2) 12" deep adjustable
shelves
® 6" ®
PART NO.
NXF/MTC08-III
I
LOUVERED PANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOUVERED PANEL
LOUVERED PANEL
®
LOUVERED PANEL
®
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
6"
Bin Trolley
®
28"
• 48" high trolley includes (1) 24" high
and (1) 18" high louvered panels
• 60" high trolley includes (1) 30" high
and (1) 24" high louvered panels
®
®
6"
Bin Trolley
®
®
28"
®
• 48" high trolley includes (2) 24" high
and (2) 18" high louvered panels
• 60" high trolley includes (2) 30" high
and (2) 24" high louvered panels
® 6" ®
PART NO.
NXF/MTC10-III
I
PART NO.
NXF/MTR09-III
I
12" DEEP ADJUSTABLE SHELF
18" DEEP VARIABLE ANGLE SHELF
12" DEEP ADJUSTABLE SHELF
18" DEEP VARIABLE ANGLE SHELF
12" DEEP ADJUSTABLE SHELF
®
®
18" DEEP VARIABLE ANGLE SHELF
6"
Shelf Trolley
PART NO.
NXF/MTR11-III
I
®
28"
®
® 6" ®
®
®
6"
Shelf Trolley
®
28"
®
• Includes (6) 12" deep adjustable
shelves
PART NO.
NXF/MTC12-III
I
I GG (Green paint) I LG (Light Gray paint) I NR (Red paint) I SN (Sand paint) I FW (White paint)
95
Nexus System Flow Racks
®
Nexus flow racks are an
effective material handling
solution for presenting parts for
86 3⁄ 4" *
picking, kitting or assembly.
Parts delivery by gravity
The Nexus Flow Rack is com®
feeding cartons or parts bins
®
reduces the need for parts delivery personnel, allowing one person to service more production
®
42 3⁄ 4"
48"
®
accessories as overhead lights,
®
*casters add 6" to overall height;
leg kit adds 3" to overall height
or packaging stations. By
assembling flow racks in rows,
you can achieve even greater
productivity and convenience.
Designed to accept any
Nexus System accessories, flow
racks can be configured to
exactly suit your needs. For
the complete range of Nexus
System accessories, see
PAINT COLORS – PLEASE NOTE!
• Nexus flow racks are available in Light Gray only.
• Other colors, including
other standard Lista colors,
are available on request at
an additional charge.
pages 77-83:
• Shelves, page 77
• Lights, page 78
• Power, page 79
• Pivoting accessories, page 82
Add a worksurface, and your
stationary Nexus flow rack
Fully configurable tracks
and guides
becomes a highly efficient
assembly or work station.
Flow rack frames are 86 3⁄4"
high and 48" deep, and are
available in five widths (30",
36", 42", 48" and 60").
Shelves can be mounted in a
variety of positions and angles
Equipped with adjustable glides
(some configurations available
with casters for mobility)
96
pletely configurable, and can be
equipped with such task-specific
shelves and worksurfaces.
Caster Sets
Plastic Laminate Worksurfaces
Particle board core with plastic laminate top and sides. 1 9⁄16" thick. Dove
gray is standard but other colors are
available on request. To order a bullnose edge, add “BN” to the end of the
part number. Requires worksurface
bracket/foot kit (see below).
Nexus Flow Rack Frames
Nexus flow rack starter frames consist
of 4 upright posts and 8 horizontal
rails. Adder sets consist of 2 additional
uprights and 6 horizontal rails. Frames
are sturdy, heavy gauge steel, and are
notched front and back at 1" increments for mounting accessories.
Includes 4 adjustable glides. 1,800 lb.
weight capacity. Optional casters available (see right).
PART NO.
Starter set
NXFR/3084
NXFR/3684
NXFR/4284
NXFR/4884
NXFR/6084
WIDTH
Adder set
NXFR/3084A
NXFR/3684A
NXFR/4284A
NXFR/4884A
NXFR/6084A
30"
36"
42"
48"
60"
Nexus Flow Rack Roller
Shelves
All tracks and guides are ordered individually (see below). 600 lb. weight
capacity.
PART NO.
NXFR/S30
NXFR/S36
NXFR/S42
NXFR/S48
NXFR/S60
# GUIDE/ROLLER HOLES
17
21
25
29
37
WIDTH
30"
36"
42"
48"
60"
Nexus Flow Rack Shelf
Accessories
Shelves are slotted on 1 1⁄ 2" increments to accept roller tracks and
guides. Guides separate sections.
Rollers are 11⁄16" wide; tracks are
1" wide. Two rollers are recommended
for rows up to 15" wide, and 3 or more
for wider rows.
PART NO.
NXFR/S-TRACK48
NXFR/S-GUIDE48
NXFR/S-CLIP
DESCRIPTION
roller track
roller guide
replacement clip
PART NO.
24" deep
PTOP-3024
PTOP-3624
PTOP-4224
PTOP-4824
PTOP-6024
WIDTH
30" deep
PTOP-30
PTOP-36
PTOP-42
PTOP-48
PTOP-60
30"
36"
42"
48"
60"
Allows individual flow rack frames to
be movable. Adds 6" to overall height.
For use with stand-alone starter
frames without worksurfaces only.
1,000 lb. capacity overall.
PART NO.
NXFR/CAST5
DESCRIPTION
set of (2) swivel & (2) swivel
casters with wheel lock
CAST5X1S-NB (1) swivel 5" caster
CAST5X1S-WB (1) swivel with wheel lock
5" caster
Easy-Order Nexus Flow Rack Combinations
The combinations below are configured
to be most useful in a wide variety of
applications.
Worksurface Bracket/Foot Kits
Required to mount worksurface (above)
to flow rack. Starter set includes
2 worksurface brackets, 2 feet, and
1 horizontal rail, and should be ordered
for the first flow rack section that will
have an attached worksurface. Adder
sets include 2 worksurface brackets,
1 foot, and 1 horizontal rail, and should
be ordered for all subsequent flow rack
sections that will have an attached
worksurface. Adds 3" to overall height.
PART NO.
Starter set
NXFR/WST-KIT/3024
NXFR/WST-KIT/3624
NXFR/WST-KIT/4224
NXFR/WST-KIT/4824
NXFR/WST-KIT/6024
NXFR/WST-KIT/3030
NXFR/WST-KIT/3630
NXFR/WST-KIT/4230
NXFR/WST-KIT/4830
NXFR/WST-KIT/6030
Adder set
NXFR/WST-KIT/3024A
NXFR/WST-KIT/3624A
NXFR/WST-KIT/4224A
NXFR/WST-KIT/4824A
NXFR/WST-KIT/6024A
NXFR/WST-KIT/3030A
NXFR/WST-KIT/3630A
NXFR/WST-KIT/4230A
NXFR/WST-KIT/4830A
NXFR/WST-KIT/6030A
Combinations With 2 Shelves
STARTER SET
PART NO.
NXFR/C3084-2
NXFR/C3684-2
NXFR/C4284-2
NXFR/C4884-2
NXFR/C6084-2
ADDER SET
PART NO.
NXFR/C3084-2A
NXFR/C3684-2A
NXFR/C4284-2A
NXFR/C4884-2A
NXFR/C6084-2A
WIDTH
30"
36"
42"
48"
60"
EACH SHELF
INCLUDES
(4) roller tracks and (1) guide
(4) roller tracks and (1) guide
(6) roller tracks and (2) guides
(6) roller tracks and (2) guides
(8) roller tracks and (3) guides
WORKSURF. SIZE
30" x 24"
36" x 24"
42" x 24"
48" x 24"
60" x 24"
30" x 30"
36" x 30"
42" x 30"
48" x 30"
60" x 30"
30" x 24"
36" x 24"
42" x 24"
48" x 24"
60" x 24"
30" x 30"
36" x 30"
42" x 30"
48" x 30"
60" x 30"
Combinations With 3 Shelves
STARTER SET
PART NO.
NXFR/C3084-3
NXFR/C3684-3
NXFR/C4284-3
NXFR/C4884-3
NXFR/C6084-3
ADDER SET
PART NO.
NXFR/C3084-3A
NXFR/C3684-3A
NXFR/C4284-3A
NXFR/C4884-3A
NXFR/C6084-3A
WIDTH
30"
36"
42"
48"
60"
EACH SHELF
INCLUDES
(4) roller tracks and (1) guide
(6) roller tracks and (1) guide
(6) roller tracks and (2) guides
(9) roller tracks and (2) guides
(12) roller tracks and (3) guides
97
Seating
Lista offers three models of
seating ideal for workstations.
Each features pneumatic seat
height adjustments, single lever
control, anatomically shaped
Seating Standard Features
•
•
•
•
•
•
seats with lumbar support for
ergonomic comfort and safety,
and a chrome footrest. All seats
•
•
•
Black vinyl material
Glides
Base – 5 star nylon reinforced
Chrome foot ring
Pneumatic height adjustment with
300 lb. rated capacity
Lifetime structural warranty, 5-year
mechanical warranty, 3-year upholstery warranty
Flammability – meets Cal 117 code
Lumbar support back
Ergonomic waterfall front seat edge
are available in mid or high
back, in fabric or vinyl, and with
casters or glides which conform
to the contour of the floor for
safety and comfort.
Seat height with glides is
18"-26". Adjustable T-arms are
• Seat height adjusts from 18"-26"
• Manual back depth adjustment
• Fixed seat angle
PART NO.
V79-2S-I-I-I
V79-2S-VA1-I-I-I
optional. ESD feature is also
V79-3S-I-I-I
V79-3S-VA1-I-I-I
optional for fabric or vinyl. Our
V79-5S-I*
seating meets the Cal 117 flam-
V79-5S-VA1-I*
mability code, with an optional
Cal 133 rating. Seating requires
MID BACK WITH
OPTIONAL
BURGUNDY FABRIC
Seating with SD
Mechanism
DESCRIPTION
mid back armless
mid back with
adjustable T-arm
high back armless
high back with
adjustable T-arm
poly. back & seat
armless
poly. back & seat
w / adjustable T-arm
HIGH BACK WITH OPTIONAL GREEN FABRIC
Fabric Colors
Other fabric and vinyl colors available
on request.
048
Burgundy
*poly. back and seat are made from a self
skinning polyurethane, available in black
vinyl only
Our seating features a lifetime structural warranty, 5-year
mechanical warranty and 3-year
upholstery warranty.
• Seat height adjusts from 18"-26"
• Back angle adjustment – either
free-floating or variable lock
• Fixed seat angle
• Back height adjusts from a seated
position
PART NO.
V79-2A-I-I-I
V79-2A-VA1-I-I-I
V79-3A-I-I-I
V79-3A-VA1-I-I-I
DESCRIPTION
mid back armless
mid back with
adjustable T-arm
high back armless
high back with
adjustable T-arm
055
1. Select either SD mechanism
or AX mechanism. Part number
shown in the charts to the left
includes black vinyl seat and
back, and glides. To specify fabric or casters, add options to part
number (below).
Navy
048
055
022
024
026
=
=
=
=
=
Burgundy
Navy
Gray
Green
Black
3. I Change to casters from
glides (optional).
C1 = hard floor casters
C2 = carpet casters
022
Gray
4. I Add additional options.
ESD*
= ESD features in seat
and casters
CAL133* = meets Cal 133
flammability code
024
026
98
How to order seating
2. I Change to fabric from
black vinyl (optional).
assembly.
Seating with AX
Mechanism
POLY BACK AND SEAT
Green
*ESD and CAL133 can not be ordered for
same seat
Black
EXAMPLE: to order a V79-3S high
back armless seat with Navy fabric,
carpet casters and ESD features, the
part number would be
V79-3S-055-C2-ESD.
Catalog Index
Air beams, Arlink 8000 . . . . . . . . . . . .24
Align® adjustable height workstations
Bases
Hand crank . . . . . . . . . . . . . . . . .35
Motorized . . . . . . . . . . . . . . . . . .35
Slide leg . . . . . . . . . . . . . . . . . . . .36
Casters . . . . . . . . . . . . . . . . . . . . . .36
Easy-Order combinations . . . . . . . .34
Rear-mount Nexus frames . . . . . . .37
Arlink® 8000 workstations
Below-worksurface accessories . . .27
Build-your-own mobile workstations . .21
Build-your-own workstations . . . . .20
Easy-Order workstations . . . . . . . . .18
ESD accessories . . . . . . . . . . . . . . . .27
Flow racks . . . . . . . . . . . . . . . . . . . .29
Lighting accessories . . . . . . . . . . . .23
Pivoting accessories . . . . . . . . . . . .28
Progressive assembly systems . . . .30
Shelves . . . . . . . . . . . . . . . . . . . . . .22
Tool storage accessories . . . . . . . . .26
Trim . . . . . . . . . . . . . . . . . . . . . . . . .16
Utility accessories . . . . . . . . . . . . . .24
Utility and parts carts . . . . . . . . . . .30
Worksurfaces . . . . . . . . . . . . . . . . .19
Back stops
Arlink 8000 . . . . . . . . . . . . . . . . . . .22
Industrial . . . . . . . . . . . . . . . . . . . . .58
Nexus . . . . . . . . . . . . . . . . . . . . . . .80
Technical electronic . . . . . . . . . . . .44
Bases, Align
Hand crank . . . . . . . . . . . . . . . . . . .35
Motorized . . . . . . . . . . . . . . . . . . . .35
Slide leg . . . . . . . . . . . . . . . . . . . . .36
Bin racks and containers
Arlink 8000 . . . . . . . . . . . . . . . . . . .28
Nexus . . . . . . . . . . . . . . . . . . . . . . .82
Cabinet pedestals
MP width . . . . . . . . . . . . . . . . . .66-71
NW (narrow width) . . . . . . . . . .60-65
Casters
Align . . . . . . . . . . . . . . . . . . . . . . . .36
Nexus flow rack . . . . . . . . . . . . . . .97
Nexus mobile trolley . . . . . . . . . . . .93
Technical electronic workstations . .43
Chairs . . . . . . . . . . . . . . . . . . . . . . . . .98
CPU holder
Align, technical elec., industrial . . .37
Arlink 8000 . . . . . . . . . . . . . . . . . . .27
Data beams, Arlink 8000 . . . . . . . . . .24
Definite Positioning System® . . . . . . .16
Document holders
Arlink 8000 . . . . . . . . . . . . . . . . . . .28
Nexus . . . . . . . . . . . . . . . . . . . . . . .82
Easy-Order combinations
Align adjustable height workstations . .34
Arlink 8000 workstations . . . . . . . .18
Industrial mobile workbenches .54-55
Industrial workbenches . . . . . . .52-53
MP cabinets . . . . . . . . . . . . . . . .68-69
MP drawer interior sets . . . . . . . . .71
MP mobile cabinets . . . . . . . . . . . .70
Nexus accessory systems . . . . . .84-85
Easy-Order combinations (continued)
Nexus flow racks . . . . . . . . . . . . . .97
Nexus packing benches . . . . . . .90-91
Nexus stands . . . . . . . . . . . . . . . . .94
Nexus trolleys . . . . . . . . . . . . . . . . .95
NW cabinets . . . . . . . . . . . . . . .62-63
NW drawer interior sets . . . . . . . . .65
NW mobile cabinets . . . . . . . . . . . .64
Technical electronic workstations . .40-41
End stops
Industrial . . . . . . . . . . . . . . . . . . . . .58
Technical electronic . . . . . . . . . . . .44
ESD accessories
Align, technical elec., industrial . . .43
Arlink 8000 . . . . . . . . . . . . . . . . . . .27
Flow racks
Arlink 8000 . . . . . . . . . . . . . . . . . . .29
Nexus . . . . . . . . . . . . . . . . . . . . . . .97
Footrests
Align, technical elec., industrial . . .37
Arlink 8000 . . . . . . . . . . . . . . . . . . .27
Hanging cabinets
Align, technical elec., industrial . . .36
Arlink 8000 . . . . . . . . . . . . . . . . . . .25
Hanging drawers, Arlink 8000 . . . . . .25
Industrial workbenches
Above-worksurface accessories . . .58
Below-worksurface accessories . . .57
Bottom shelves . . . . . . . . . . . . . . . .57
Easy-Order combinations . . . . .52-53
Easy-Order mobile combinations . .54-55
Legs . . . . . . . . . . . . . . . . . . . . . . . . .57
Privacy panels . . . . . . . . . . . . . . . . .57
Stringers, foot rests . . . . . . . . . . . . .57
Worksurfaces . . . . . . . . . . . . . . . . .56
Keyboard holder
Align, technical elec., industrial . . .37
Arlink 8000 . . . . . . . . . . . . . . . . . . .27
Legs
Lista Legs, industrial . . . . . . . . . . . .57
Lista mobile legs, industrial . . . . . .57
Mobile panel legs, industrial . . . . .57
Panel legs, industrial . . . . . . . . . . . .57
Technical electronic . . . . . . . . . . . .43
Technical electronic leg extenders .43
Technical electronic mobile legs . . .43
Technical electronic panel legs . . . .43
Lights
Overhead, Arlink 8000 . . . . . . . . . .23
Overhead, Nexus . . . . . . . . . . . . . .78
Undershelf . . . . . . . . . . . . . . . . . . .78
Material transfer worksurfaces . .19, 42
Monitor arms and shelves
Arlink 8000 . . . . . . . . . . . . . . . . . . .28
Nexus . . . . . . . . . . . . . . . . . . . . . . .82
MP width cabinets . . . . . . . . . . . .66-71
Bases . . . . . . . . . . . . . . . . . . . . . . . .67
Drawers . . . . . . . . . . . . . . . . . . . . .67
Easy-Order combinations . . . . .68-69
Easy-Order drawer interior sets . . .71
Easy-Order mobile combinations . .70
Housings . . . . . . . . . . . . . . . . . . . . .67
Nexus flow racks
See flow racks, Nexus
Nexus packing benches
See packing benches, Nexus
Nexus system
Back stops . . . . . . . . . . . . . . . . . . . .80
Easy-Order combinations . . . . .84-85
Lighting accessories . . . . . . . . . . . .78
Overhead cabinets . . . . . . . . . . . . .81
Panels . . . . . . . . . . . . . . . . . . . . . . .83
Pivoting accessories . . . . . . . . . . . .82
Plastic box rails . . . . . . . . . . . . . . . .80
Power accessories . . . . . . . . . . . . . .79
Rear-mount frames (for Align) . . . .37
Shelves . . . . . . . . . . . . . . . . . . . . . .77
Surface-mount frames . . . . . . . . . .76
Tool rails . . . . . . . . . . . . . . . . . . . . .79
NW (narrow width) cabinets . . . . .60-65
Bases . . . . . . . . . . . . . . . . . . . . . . . .61
Drawers . . . . . . . . . . . . . . . . . . . . .61
Easy-Order combinations . . . . .62-63
Easy-Order drawer interior sets . . .65
Easy-Order mobile combinations . .64
Housings . . . . . . . . . . . . . . . . . . . . .61
Overhead cabinets
Arlink 8000 . . . . . . . . . . . . . . . . . . .25
Nexus . . . . . . . . . . . . . . . . . . . . . . .81
Packing benches, Nexus
Easy-Order combinations . . . . .90-91
Leg inserts . . . . . . . . . . . . . . . . . . . .88
Roll holders . . . . . . . . . . . . . . . .88-89
Shelves . . . . . . . . . . . . . . . . . . .88-89
Wire dividers . . . . . . . . . . . . . . .88-89
Panels
Louvered, Arlink 8000 . . . . . . . . . .25
Louvered, Nexus . . . . . . . . . . . . . . .83
Markerboard/tackboard, Arlink 8000 . . .25
Markerboard/tackboard, Nexus . . .83
Modesty, Arlink 8000 . . . . . . . . . . .25
Pegboard, Arlink 8000 . . . . . . . . . .25
Pegboard, Nexus . . . . . . . . . . . . . . .83
Solid steel, Nexus . . . . . . . . . . . . . .83
Parts bin rails
Arlink 8000 . . . . . . . . . . . . . . . . . . .26
Nexus . . . . . . . . . . . . . . . . . . . . . . .80
Pivoting accessories
Arlink 8000 . . . . . . . . . . . . . . . . . . .28
Nexus . . . . . . . . . . . . . . . . . . . . . . .82
Power beams and strips
Arlink 8000 . . . . . . . . . . . . . . . . . . .24
Nexus . . . . . . . . . . . . . . . . . . . . . . .79
Privacy panels . . . . . . . . . . . . . . . .43, 57
Progressive assembly systems . . . . . .30
Seating . . . . . . . . . . . . . . . . . . . . . . . .98
Shelves
Adjustable, Nexus . . . . . . . . . . . . . .77
Adjustable riser, industrial . . . . . . .58
Adjustable riser, technical electronic . .44
Bottom, Align . . . . . . . . . . . . . . . . .37
Bottom, industrial . . . . . . . . . . . . . .57
Bottom, Nexus packing bench . . . .88
Bottom, technical electronic . . . . . .43
Flow rack, Arlink 8000 . . . . . . . . . .29
Shelves (continued)
Flow rack, Nexus . . . . . . . . . . . . . .97
Instrument riser, technical electronic . .44
Open wire, Arlink 8000 . . . . . . . . . .22
Stationary riser . . . . . . . . . . . . . . . .58
Steel, Arlink 8000 . . . . . . . . . . . . . .22
Variable angle, (Arlink 8000 . . . . . .22
Variable angle, Nexus . . . . . . . . . . .77
Stands
Arlink 8000 . . . . . . . . . . . . . . . . . . .30
Nexus . . . . . . . . . . . . . . . . . . . . . . .93
Nexus Easy-Order combinations . . .94
Nexus frames . . . . . . . . . . . . . . . . .93
Nexus worksurfaces . . . . . . . . . . . .93
Static dissipative accessories
Align, technical elec., industrial . . .43
Arlink 8000 . . . . . . . . . . . . . . . . . . .27
Stringers, foot rests . . . . . . . . . . .43, 57
Technical electronic workstations
Above-worksurface accessories . . .44
Below-worksurface accessories . . .43
Bottom shelves . . . . . . . . . . . . . . . .43
Easy-Order combinations . . . . .40-41
Legs . . . . . . . . . . . . . . . . . . . . . . . . .43
Privacy panels . . . . . . . . . . . . . . . . .43
Stringers, foot rests . . . . . . . . . . . . .43
Top support rails . . . . . . . . . . . . . . .43
Worksurfaces . . . . . . . . . . . . . . . . .42
Tool rails, Nexus . . . . . . . . . . . . . . . . .79
Tool trolleys, Arlink 8000 . . . . . . . . . .26
Top support rails . . . . . . . . . . . . . . . . .43
Trolleys
Arlink 8000 . . . . . . . . . . . . . . . . . . .30
Nexus . . . . . . . . . . . . . . . . . . . . . . .93
Nexus Easy-Order combinations . . .95
Nexus frames . . . . . . . . . . . . . . . . .93
Nexus frames, mobile . . . . . . . . . . .93
Nexus worksurfaces . . . . . . . . . . . .93
Utility and parts carts, Arlink 8000 . . .30
Vertical Space Integrator System . . . .31
VSI accessory system . . . . . . . . . . . . .31
Wire holders and guides, Arlink 8000 . . .26
Worksurfaces
Align, technical electronic . . . . . . . .42
Arlink 8000 . . . . . . . . . . . . . . . . . . .19
Butcher block
Align, technical electronic . . . . . .42
Industrial . . . . . . . . . . . . . . . . . . .56
Nexus stands and trolleys . . . . . .93
Galvanized steel over wood . . . . . .56
Lista Top . . . . . . . . . . . . . . . . . . . . .56
Phenolic resin (Align, technical electronic) 42
Plastic laminate
Align, technical electronic . . . . . .42
Arlink 8000 . . . . . . . . . . . . . . . . .19
Industrial . . . . . . . . . . . . . . . . . . .56
Nexus flow rack . . . . . . . . . . . . . .97
Nexus stands and trolleys . . . . . .93
Stainless steel over wood . . . . . . . .56
Static dissipative
Align, technical electronic . . . . . .42
Arlink 8000 . . . . . . . . . . . . . . . . .19
99
Lista Colors
CODE COLOR
BE
Beige
CODE COLOR
BB* Bright Blue
Lista International headquarters and manufacturing facility in Holliston, MA, USA. Lista International also manufactures in
Burlington, ON, Canada.
CODE COLOR
BK* Black
CODE COLOR
CB
Classic Blue
For information about Lista’s comprehensive line of
storage cabinets, Storage Wall ® systems and other
storage and workspace solutions, ask for our General Storage Catalog.
CODE COLOR
GR
Dark Gray
CODE COLOR
GG
Green
Represented by
CODE COLOR
NR
Red
CODE COLOR
FW
White
Lista and Arlink® 8000 Colors
CODE COLOR
LG* Light Gray
CODE COLOR
SN
Sand
* Available with ESD properties. To specify
ESD paint, add prefix “ESD” to paint part
number. For ESD paint specifications, contact
Lista Customer Service. ESD paint not available for Arlink® 8000 products.
Color differences exist between color samples and actual finishes. Please contact your
Lista representative for accurate color matching. Custom colors are available and will be
quoted on request.
Lista International Corporation
106 Lowland Street
Holliston, MA 01746-2094
USA
Telephone: (508) 429-1350
Toll-Free: (800) 722-3020
Fax: (508) 626-0353
Internet: www.listaintl.com
E-mail: [email protected]
ISO 9001 Certified
Product specifications are subject to change
without notice and are those in effect at time
of shipment.
©2008 Lista International Corporation
04-08 125M
Printed in U.S.A.
Lista®, Making Workspace Work®, Align®, Arlink®, Definite Positioning System®, PrevenTip® and Storage Wall ® are registered
trademarks of Lista International Corporation.