to view our online brochure - RACO Industrial Corporation

Transcription

Visit Our
Website for
Full Specs
and Photos:
RACO-GRAM
2009
www.raco.com
Email Us:
[email protected]
SAW, HORIZONTAL:
41" x 41" HYD-MECH #H40, Semi
Auto., Twin Column, 3" Dia. Blade,
Hydr. Vise, Coolant, 20 HP, 1992,
$69,500
SHEAR, HYDRAULIC: 12' x 1/2" CINCINNATI
#500HS X 12, Micro Computer Gauge Ctrl.,
48" FOBG, 12' Sq. Arm, 1995, $59,500
www.raco.com
CNC BED TYPE MILL:
BUTLER ELGAMILL
#HE/8M, Bed Type, Univ.
Mill Head, 244"X, 65"Y,
38"Z, 40" x 315" Tbl., #50
Tpr., 40 ATC, #TNC355
Heidenhain CNC, 2000
RPM, 30 HP, 1990,
$219,500
CNC GANTRY MILL:
FOREST LINE "Seramill 240" Gantry Type, Univ. Hd.,
393"X, 98"Y, 37.4"Z, 83" x 393" Tbl., Cat. 50 Tpr.,
Siemens 840 CNC, 30 ATC, Programmable Angular
Positioning of Head Every 2.5 Deg., Chip
Conv., 34 HP, 1997, P.O.R.
RACO INDUSTRIAL CORPORATION
We’re only 10 Minutes from Chicago’s O’Hare Airport • Call Us Toll Free 800-411-4879
2100 S. Wolf Rd. • Des Plaines, IL 60018-1932, USA • 847/298-8600 • Fax: 847/635-8976 • e-mail: [email protected]
CONTACT ATHERTON MACHINERY FOR A VARIETY OF
YOUR NEW MACHINE TOOL REQUIREMENTS
SHARP INDUSTRIES full line of Standard and CNC machines include Knee Mills from 3 HP 9” x
50” table thru 5 HP 12” x 51” table - Lathes from 13” x 40” thru 70” x 240” - Cylindrical Grinders
from 6” x 18” thru 14” x 40” Contact us for our current Des Plaines, IL stock
VANGUARD MACHINERY has a selection of Large Capacity Heavy-Duty Standard & CNC (Fanuc
Controls) machines. Horizontal Boring Mills 4” - 6” spindles, VTL’s up to 80” swing, Straight & Slant
Bed Lathes 50” up to 240” center distance, Double Column Bridge Mills with X 236” x Y 76” x Z 31.5”
available with “W” axis, Engine Lathes up to 78” x 472”, plus Welding Manipulators, Welding
Positioners & Tank Rolls A Comprehensive Stock In Houston, TX
KENT INTERNATIONAL with a complete line of Hydraulic Surface Grinders with standard automatic and PLC programmable automatic down feed in saddle & column-type machines from 8”
x 18” capacity to 36” x 120” grinding capacity, Double Column Surface Grinder of 60” x 120”
capacity Contact us for our current Des Plaines, IL stock
HYD-MECH sawing machines to fit your requirements manual, semi-automatic and automaticHorizontal Swivel Head Miter Cutting band saws S series medium duty & M series for heavy duty
production sawing, Horizontal Dual Post H series dual post from 10” round/square to 40” x 80”,
Vertical Tilt Frame in 18” and 25”, Vertical Contour Saw 20” capacity Contact us for our current
Des Plaines, IL stock
U. S. INDUSTRIAL affordable Hydraulic CNC Press Brake from 44 ton x 4 feet thru 200 ton x 13 feet
including light curtain, color graphics with automatic bend sequence calculation, Hydraulic
Conventional & CNC Shears 1/4” x 4 feet to 3/4” x 13 feet, Initial Pinch Plate Roll 1/4” x 5 feet
includes LED readout with memory, hardened rolls and cone rolling attachment Contact us for our
current Des Plaines, IL stock
CHEVALIER MACHINERY manufactures Hi-Precision CNC, Automatic & Manual Surface
Grinders saddle & column style from 6” x 18” thru 24” x 80” grinding capacities, Automatic
Cylindrical Grinders from 8” x 16” to 16” x 60”, CNC Straight Bed & Slant Bed Turning
Machines 18” x 20” thru 40” x 160”, Vertical Machining Centers of 14” x 18” thru 25” x 52”
STANDARD INDUSTRIAL Made 100% in the USA Hydra-Mechanical Press Brakes allows full tonnage anywhere along bed, available in capacities of 100 ton x 8 feet thru 1000 ton x 20 feet, Hydra-Mechanical
Shears in sizes 1/4” x 8 feet thru 1-1/4” x 20 feet All Standard Industrial Shears & Press Brakes offer a
full compliment of options and an unmatched 5-Year Warranty covering the frame, ram, drive components such as shafts, bearings & slides, hydraulics & electrics. A 2-Year warranty covers any CNC & PLC
components. The hydraulic and electrical components are available from local sources
DMTG affordable Standard Engine Lathes with the following Models currently in our inventory 16”
x 40” w/taper turning attachment, chucks & steady rest, 20” x 60” w/taper attachment, chucks &
4-way tool post, 22” x 120” w/taper attachment, chucks, 4-way tool post & steady rest, 26” x 120”
w/taper attachment, chucks, 4-way tool post & steady Contact Us for Special Pricing For These
Stock Machines
2
PHONE: 847 298-0500
FAX: 847 635-8976
ATHERTON MACHINERY DIV.
RACO INDUSTRIAL CORPORATION
2100 S. WOLF ROAD
DES PLAINES, IL 60018
Website: www.raco.com
E-Mail: [email protected]
______________________________________________________________________________________________________________________________________
RACO Industrial Corporation • Phone: 800-411-4879 • 847-298-8600 • Fax 847-635-8976
TOP QUALITY USED MACHINERY YOU CAN COUNT ON
SHEAR, HYDRAULIC: 20' x 1/2" ACCURSHEAR #850020, Hydr.,
Flush Floor, 36" Pwr. B.G., Sq. Arm, Extra Blades, 50 HP, 1983,
$84,500
CNC HORIZ. BORING MILL: 4" UNION BFT-105, Table Type, 54" x
48" Rot. Tbl., 69"X, 49"Y, 26" Saddle, #50 Taper, Heidenhain
TNC355 CNC, 1989, $129,500
CNC BORING MILL, VERT.: 46" BULLARD Dyn-Au-Tape, Allen
Bradley 7360 CNC, 46" 4 Jaw Tbl., Turret Head, 200 RPM, 50 HP,
1980, $69,500
CNC GUN DRILL: DEHOFF #1036T, Twin Spindle, CNC, 1" Dia.
Cap., 36" Stk., Allen Bradley Panelview PLC 500 Control, HiPressure Coolant, Chiller, Chip Conveyor, 5 HP Heads, 30 HP
Pump, 1998, $99,500
GRINDER,
SURFACE,
ROTARY:
60" BLANCHARD
#32-60,
60" Mag. Chuck,
w/ 3/4" Chuck Life,
24" Vert., Dresser,
Coolant, 100 HP,
1966, $79,500
LATHE, ENGINE: 50" x 240" POREBA #TCG125, Hvy. Duty, 49"
4 Jaw Chuck, 315 RPM, P.R.T., Pwr. Tailstock, D.R.O., 100 HP, 1975,
$129,500
______________________________________________________________________________________________________________________________________
RACO Industrial Corporation • Website: www.raco.com • Email: [email protected]
3
FOR FULL SPECS & PHOTOS: VISIT OUR WEBSITE: www.raco.com • EMAIL US: [email protected]
4
AUTOMATIC CHUCKER: GOSS & DELEEUW 123,
7 Spindle Tool Rotating, Heavy Duty Gear Driven
Spindles, 1966, $19,500
AUTOMATICS
#1-2-3 GOSS & DELEEUW 7 Spindle Chucker, Gear
Driven, 2 Jaw Pwr. Chucks, Leadscrew Threading,
1968 & 1966 (2) . . . . . . . . . . . . . . .
Ea. $19,500
2-5/8" ACME GRIDLEY RB6, 6 Spindle, Rebuilt 1990,
Camless With Compumotor Control, Threading,
Complete Bar Feed & Tooling, In Shop, EXC $25,000
1-1/4" ACME GRIDLEY #RA-6, 5 Slides Namco Acro
Bar Feed, Tooling, 25 HP, 1975 . . . . . . . . . . . .$9,500
1-1/4” BROWN & SHARPE #2, Sq. Base, Vert. Slide,
Tooling, 7-1/2 HP, 1959 . . . . . . . . . . . . . . . . . . .$2,950
3/4" BROWN & SHARPE #2 CNC Ultramatic, A-B
8200 CNC, 2 Vert. Slides, 8 Pos. Turret, Tooling, 7-1/2
HP, 1983 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,500
9/16” DAVENPORT, Model B, 5-Spindle, 4 Cross
Slides, Threading, Pickoff & Countersink Attach.,
Chip Conveyor, Reel and Stand, 1980 . . . . . .$6,950
BORING MILLS, HORIZONTAL
5" GIDDINGS & LEWIS FRASER #70A-G5-T,
Tbl. Type, 48" x 96" Tbl., 84" Cr., 74" Vert., #50 Tpr.,
P.D.B., Ball Screws, D.R.O., Full Pendant, 50 HP,
1970 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$69,500
4" WOTAN #B100-S, 43" x 55" Rot. Tbl., 64" Cr., 48"
Vert., #50 Tpr., Pwr. Draw Bar, D.R.O., 1600 RPM, 15
HP, 1966 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44,500
3-1/2" CINCINNATI GILBERT #T, Tbl. Type, 38" x 60"
Tbl., 48" Cr., 48" Vert., #5 M.T., Outboard Support,
700 RPM, 7-1/2 HP, 1946 . . . . . . . . . . . . . . . . .$12,500
BORING MILLS, VERTICAL
56" BULLARD Dynatrol, Turret & Side Hds., 48" Vert.,
3 Jaw Comb. (Independent) Chuck, Pwr. Turret,
Chrome Ways, 300 RPM, 75 HP1968 .
$77,500
BORING MILL,
HORIZONTAL:
5" GIDDINGS &
LEWIS FRASER
#70A-G5-T,
Tbl. Type, 48" x
96" Tbl., 84" Cr.,
74" Vert., #50
Tpr., P.D.B., Ball
Screws, D.R.O.,
Full Pendant, 50
HP, 1970,
$69,500
BORING
MILL,
VERTICAL:
42" BULLARD
Cutmaster,
Turret & Side
Hds., 48"
Vert., 150
RPM, 4 Jaws,
Coolant, 1952,
$49,500
BORING MILL,
VERTICAL:
56" BULLARD
Dynatrol, Turret &
Side Hds., 48" Vert.,
3 Jaw Comb.
(Independent)
Chuck, Pwr. Turret,
Chrome Ways, 300
RPM, 75 HP, 1968,
$77,500
52" BULLARD DYNATROL, Turret & Ram Hds.,
40" Vert., 52" 4 Jaw Chuck, 250 RPM, 50 HP,
1964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79,500
42" BULLARD Cutmaster, Turret & Side Hds., 48"
Vert., 150 RPM, 4 Jaws, Coolant, 1952
$49,500
36" BULLARD DYNATROL, Turret & Side Hds., 4 Jaw
Univ. Chuck, 468 RPM, 30" Vert., 50 HP, 1968 .$34,500
CNC MACHINERY
CNC Boring Mills, Horizontal
WOTAN "RAPID O", 4 Axis, #50 Tpr., P.D.B., 31.5" x
31.5" Rot. Tbl., 49" Cr., 40" Vert., 3200 RPM, 40 ATC,
G.E. 2000 CNC, 40 HP, 1987 . . . . . . . . . . . . . .$49,500
4-1/8" WOTAN #B75/105MNC, Allen Bradley 8200
CNC, 35" x 39" Rot. Tbl., 55" Cr., 40" Vert., #50 Tpr.,
P.D.B., 1250 RPM, 12.5 HP, 1984 . . . .
$49,500
4" UNION #BFT-105, #TNC 355 Heidenhain 3 Axis
CNC, #50 Tpr., 48" x 54" Rot. Tbl., 2,500 RPM, 34 HP,
1989 . . . . . . . . . . . . . . .(see page 3)
$129,500
CNC Boring Mills, Vertical
46" BULLARD Dyn-Au-Tape, Allen Bradley 7360
CNC, 46" 4 Jaw Tbl., Turret Head, 200 RPM, 50 HP,
1980 . . . . . . . . . . . . . . . .(see page 3)
$69,500
40" OM #TM2-10N, Fanuc 6T CNC, 4 Jaw Chuck, 291/2" Vert., 500 RPM, Tooling, 40 HP, 1980 . .$69,500
CNC Lathes/Turning Centers
TOOLMEX #TUR560-MN80, Flat Bed Manual Plus
CNC, 22" x 80" CC, Siemens 810D Control, 1800 RPM,
4.1" Sp. Bore, 8 St. Programmable Turret, Chip Conv.,
Chucks, 20 HP, 2001, (2) . . . . . . . . . . . . . .Ea. $34,500
CINCINNATI MILACRON #CINTURN 18S, 12" 3 Jaw
Hydr. Chuck, 60"CC, Accramatic 900 CNC, Hydr. St.
Rest, Chip. Conv., 50 HP, 1981 . . . . . . . . . . . . .$9,950
CINCINNATI Talon 210, Accramatic 850 SX CNC,
Tailstock, Chip Conv., 3500 RPM, 22 HP, 1992$19,500
DAEWOO PUMA 6, 6" Hydr. Chuck, Fanuc 11T CNC,
4500 RPM, 15 HP, 1987 . . . . . . . . . . . . . . . . . . .$8,950
HARDINGE Conquest 42, Fanuc OT CNC, Parts
Catcher, 16C Collet Chuck, Tailstock, 5000 RPM, 10
HP, 1992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24,500
HARDINGE Conquest T42, C Axis, Sub Spindle, Milling,
Fanuc 18T CNC, 6" Chuck (Main), 16C Collet (Sub),
Parts Catcher, Tooling, 10 HP, 1996 . . . .
$46,500
HITACHI SEIKI "HiCell 20", Turn/Mill, C Axis, Y Axis,
10 St. Turret, 12 ATC, 8" Chuck, 15.75" Sw., 19.7"
Machining Length, Seicos L Multi CNC, Chip Conv.,
1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,500
HITACHI SEIKI "HiTech Turn 23 SII", 10" Hydr.
Chuck, 23.6"CC, 2-1/2" Bar Cap., Seiki Multi CNC,
Tool Setter, Prog. Tailstock, Chip Conv., 20 HP, 1994
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500
HITACHI SEIKI #TF25 CNC Turning Center,
10" Hydr. Chuck, 43” Turn Length, Seikos
10L CNC, 10 St. Turret, Chip Conv., 25 HP,
1997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22,500
HYUNDAI #HIT20M, Turn/Mill, C Axis, Siemens Hitrol
King CNC, 10" Chuck, Prog. Tailstock, 12 St. VDI
Turret, (3) Live Tool Holders, 25 HP, 1999 . . .$42,500
MAZAK Quickturn 18N, 10" Hydr. Chuck, 19.6" CC,
2-3/4" Bar Cap., Mazatrol T32B CNC, Parts Catch.,
Prog. Tailstock, Chip Conv., 8 St. Turret, 20 HP, 1994
...............................
$26,500
MAZAK QT25, 12" Chuck, Mazatrol T-2 CNC, Chip
Conv., 30 HP, 1988 . . . . . . . . . . . . . . . . . . . . .$17,500
MAZAK QT35, 12" Chuck, Mazatrol T-2 CNC, Chip
Conv., 40 HP, 1988 . . . . . . . . . . . . . . . . . . . . .$19,500
MAZAK Quick Slant 20U, 4 Axis, Mazatrol T-4 CNC,
LNS Bar Feed, Chip Conv., 1986 . . . . . . . . . . .$9,500
MILLTRONICS #ML14 Series A, CNC/Manual,
Centurian V CNC, 14" Sw., 40" CC, 8" Chuck, 2000
RPM, 5 HP, 1997 . . . . . . . . . . . . . . . . . . . . . . .$17,500
MIYANO #LZ-02, 8" 3 Jaw Hydr. Chuck,
Loader/Unloader, Fanuc 21T CNC, Chip Conveyor,
15 HP, 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . $59,500
MORI SEIKI #ZL25B/500, 4 Axis, 10" Chuck, Fanuc
15TT CNC, Chip Conv., 10 St. Top Turret, 8 St.
Bottom Turret, 30 HP, 1990 . . . . . . . . . . . . . .$19,500
MORI SEIKI #VL55 CNC Vert. Turning Center, 20"
Hydr. 3 Jaw Chuck, 26" Turn Height, Fanuc 18TB
CNC, 10 St. Turret, 2000 RPM, Chip Conv., 40 HP,
(see page 5) $74,500
1998 . . . . . . . . . . . . . . . .
MORI SEIKI #AL-20 BTM, Fanuc OT Mate CNC, 8"
Chuck, 16C Collet Ck., Tooling, 10 HP, 1990, (2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ea. $22,500
NARDINI "Logic 250 G", Flat Bed, 20" Sw., 80" CC,
Fanuc 20T CNC, 8 St. Progr. Turret, 3000 RPM,
Tooling, Chip Conv., 1997 . . . . . . . . .
$34,500
OKUMA HOWA #2SP-15HG, Twin Spindle, Fanuc 18T
CNC, 6000 RPM, Chip Conv., Robotic Load Arm,
1996 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500
OMNITURN #GT75 Series II Gang Style, 12"X, 9"Z,
14" x 6" Tooling Plate, Omniturn CNC, 4000 RPM, 5C
Air Collet, 5 HP, 1998 . . . . . . . . . . . . . . . . . . .$19,500
TOOLMEX #TUR560-MN80, Flat Bed, 22" Sw. x 80"
CC, #810D Siemens CNC, 8 Sta. Programmable
Turret, 10" Hydr. Chuck, 4.1" Sp. Bore, St. Rests,
Chip Conv., 20 HP, 2001, (2) . . . . . . . . . .Ea. $36,500
WASINO #LJ-3B, 5C Collet Chuck, 1-5/16" Bar Cap.,
Fanuc OT CNC, 14" CC, Hydr. Tailstock, 8 St. Turret,
10 HP, 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500
CNC TURNING CENTER: MAZAK Quickturn 18N,
10" Chuck, Tailstock, Mazatrol T32B CNC Control,
1994, $26,500
CNC LATHE: NARDINI "Logic 250 G", Flat Bed, 20"
CNC BORING MILL, HORIZ.: 4-1/8" WOTAN #B75/105MNC,
Sw., 80" CC, Fanuc 20T CNC, 8 St. Progr. Turret,
Allen Bradley 8200 CNC, 35" x 39" Rot. Tbl., 55" Cr., 40"
3000 RPM, Tooling, Chip Conv., 1997, $34,500
Vert., #50 Tpr., P.D.B., 1250 RPM, 12.5 HP, 1984, $49,500
__________________________________________________________________________________________________________________________
CNC Machining Centers, Horizontal
MAZAK #H25N Powercenter, 4 Axis, M-2 Mazatrol CNC,
(2) 31.5" x 31.5" Pallets, 43"X, 42"Y, 41"Z, 50 Tpr, 4000
$59,500
RPM, 80 ATC, Chip Conv., 25 HP, 1986 . .
MAZAK #H15J Powercenter, M-2 Mazatrol CNC, (2) 19.6" x 19.6"
Pallets, 50 Tpr., 5000 RPM, 40 ATC, 15 HP, 1985 . . . . . .$29,500
MAZAK #H400 Mazatech, 22"X, 18.1"Y, 20"Z, (2) 15.75"
Sq. Pallets, Mazatrol M-2 CNC, 4th Axis, 30 ATC, #40
Tpr., Chip Conv., 7K RPM, 10 HP, 1987 . . . . . .$16,500
MITSUBISHI #M-H5A, 7 Pallet Pool, 28"X, 24.8"Y,
23.6"Z, 19.7" x 19.7" Pallets, 10,000 RPM, #50 Tpr.,
80 ATC, Cool/Thru Spindle, #M3 Meldas CNC, Rigid
$69,500
Tap., Chip Conv., 1994 . . . . . . . . . . . .
MORI SEIKI #MH63, 39"X, 31.5"Y, 29.5"Z, (2) 24.8" X
24.8" Pallets, Fanuc 15M CNC, 60 ATC, Cat. 50 Tpr.,
3600 RPM, Chip Conv., 20 HP, 1989 .
$44,500
BROTHER #TC-731S CNC Horiz. Drill/Tap Center,
19.7"X, 15.7"Y, 15.7"Z, #40 Tpr., Brother #840 CNC,
12 ATC, 8000 RPM, 1995 . . . . . . . . . . .
$17,500
CNC Machining Centers, Vertical
BRIDGEPORT INTERACT 412, 17.7"X, 12.2"Y,
11.8"Z, 12 ATC, 3K RPM, . .Fanuc OM CNC, #40 Tpr.,
7-1/2 HP, 1989 . . . . . . . . . . . . . . . . . . . . . . . . .$14,500
BRIDGEPORT INTERACT 308, 17.7"X, 12.2"Y,
16.1"Z, #30 Tpr., #TNC2500 Heidenhain CNC, 8 ATC,
4000 RPM, Full Guarding, 4.5 HP, 1990 . . . . .$9,950
BUTLER ELGAMILL #HE/8M, Bed Type, Univ. Mill
Head, 244"X, 65"Y, 38"Z, 40" x 315" Tbl., #50 Tpr., 40
ATC, #TNC355 Heidenhain CNC, 2000 RPM, 30 HP,
1990 . . . . . . . . . . . .(see front cover)
$219,500
CNC MACHINING CENTER, HORIZ.: MAZAK #H25N Powercenter,
4 Axis, M-2 Mazatrol CNC, (2) 31.5" x 31.5" Pallets, 43"X, 42"Y,
41"Z, 50 Tpr, 4000 RPM, 80 ATC, Chip Conv. 25 HP, 1986, $59,500
CINCINNATI Sabre 1250, 50"X, 26"Y, 26"Z, Acramatic
850SX CNC, Cat. 40 Trp., 8,000 RPM, 21 ATC, 15 HP,
1992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29,500
CINCINNATI Arrow 1000, 40"X, 20"Y, 22"Z, 8000
RPM, #40 Tpr., Accramatic 2100 CNC, 21 ATC, 15 HP,
1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500
CINCINNATI Sabre 1000, 40"X, 20"Y, 22"Z, 8000
RPM, #40 Tpr., 21 ATC, Accramatic 2100 CNC, 15 HP,
1998, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500
FADAL #VMC6030, 60"X, 30"Y, 30"Z, #88 HS CNC, 21
$46,500
ATC., #40 Tpr., 10K RPM, 22.5 HP, 1995
FADAL #VMC15XT, 30"X, 16"Y, 28"Z, #40 Tpr., CNC
88HS Control, 21 ATC, 7500 RPM, Rigid Tap, 10 HP,
1996 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22,500
FADAL #VMC15, 20"X, 16"Y, 20"Z, #40 Tpr., Fadal 88
CNC, 16 ATC, 10,000 RPM, 10 HP, 1994 . . . . .$13,500
FADAL #VMC20, 20"X, 16"Y, 20"Z, #40 Tpr., Fadal 88
CNC Control, 16 ATC, 10,00 RPM, 15 HP, 1991$12,500
FADAL #VMC20, 20"X, 16"Y, 20"Z, #40 Tpr., 6000 RPM,
16 ATC, 10 HP, 1990 . . . . . . . . . . . . . . . . . . . . . .$13,500
FEELER (FAIR FRIEND) #FV600-APC, 24"X, 15.7"Y,
15.7"Z, (2) 30" x 15" Pallets, Fanuc OMC, 6" Tsudakoma
4th Axis Tbl., 6K RPM, 18 ATC, 1992 . . . . . . . . . .$9,950
FOREST LINE "Seramill 240" Gantry Type, Univ. Hd.,
393"X, 98"Y, 37.4"Z, 83" x 393" Tbl., Cat. 50 Tpr.,
Siemens 840 CNC, 30 ATC, Programmable Angular
Positioning of Head Every 2.5 Deg., Chip Conv., 34 HP,
1997 . . . . . . . . . . . . . . . .(see front cover)
P.O.R.
FRYER #MC60, 60"X, 30"Y, 28"Z, Anilam 5300 CNC,
24 ATC, #40 Tpr., 8500 RPM, Box Ways, 20 HP,
2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$29,500
CNC MACHINING CENTER, VERT.: JOHNFORD VMC2020,
80"X, 35"Y, 28"Z, #50 Tpr., 34" x 82" Tbl., 20 ATC, Fanuc OM
CNC Control, 1994, $79,500
H.H.ROBERTS/TOPWELL #TW50-MCO, 50"X, 22"Y,
22"Z, Cat. 40 Tpr., Anilam 5300MK, 3 Axis CNC, 20 ATC,
6000 RPM, 15 HP, 2001 . . . . . . . . . . . . . . . . . . . . .$22,500
HAAS #VF4, 50"X, 20"Y, 25"Z, 7500 RPM, #40 Tpr., Rigid
Tap, 4th Prewire, Chip Conv., 15 HP, 1998 .
$39,500
HAAS #VF3-APC, 2 Pallets, 40"X, 20"Y, 25"Z, Cat. 40
Tpr., 7,500 RPM, 20 ATC, Rigid Tap, Prewired 4th, 15 HP
Hi Torque, 1997 . . . . . . . . . . . . . . . . . . . . . . . . . . $39,500
HAAS #VF3, 40"X, 20"Y, 25"Z, #40 Tpr., 7500 RPM, 20
ATC, Rigid Tap, 15 HP, 1994 . . . . . . . . . . . . . . . . $24,500
HARDINGE Conquest VMC 700, 28"X, 18"Y, 22"Z,
Cat. 40 Tpr., 10,000 RPM, Fanuc 18-M CNC, Rigid
Tap., 20 Pos. Side Mount ATC, 20 HP, 1996 .$27,500
HURCO #BMC-30M, 30"X, 18"Y, 24"Z, Cat. 40 Tpr.,
8000 RPM, Ultimax 3 Twin Screen CNC, 24 ATC,
Rigid Tap, Ulti Pockets, 3-D, 10 HP, 1995 . . .$26,500
HITACHI SEIKI #VK55, Twin Spindle, 40"X, 22"Y,
22"Z, 22" x 55" Tbl., #50 Tpr., 4500 RPM, (2) 20 ATC's,
Seikos MII CNC, 15 HP, 1988 . . . . . . . . . . . .$19,500
HITACHI SEIKI #VA65II, 50"X, 25"Y, 25"Z, Fanuc 11M,
#50 Tpr., 30 ATC, 4,000 RPM, 20 HP, 1984 . .$36,500.
JOHNFORD #VMC2020, 80"X, 35"Y, 28"Z, BT50 Tpr.,
Fanuc OM CNC, 2 Speed Gear Box, 34" x 82" Tbl., 20
ATC, 3,600 RPM, 20 HP, 1994 . . . . . .
$79,500.
LEADWELL #MCV 1300S, 51.9"X, 29.9"Y, 22"Z. Cat. 40
Tpr., Fanuc OMF Conversational CNC, 30 ATC, Rigid Tap,
6,000 RPM, 27" x 67" Tbl., 20 HP, 1993 . .
$34,500
LEADWELL #MCV-OP, 20”X, 14”Y, 16”Z, Mits.
Meldas 310 CNC, #40 Tpr, 6000 RPM, 16 ATC, 7-1/2
HP, 1991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12,500
MATSUURA
#MC760V,
30"X,
16"Y,
19"Z,
40 Tpr., Yasnac M5 CNC, 25 ATC, Tooling, 7.5 HP,
1981 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,500
MOST MACHINES SOLD WITH 30-DAY RETURN PRIVILEGE.
CNC LATHE: HARDINGE Conquest T42, C Axis, Sub
Spindle, Milling, Fanuc 18T CNC, 6" Chuck (Main), 16C
Collet (Sub), Parts Catcher, Tooling, 10 HP, 1996 $46,500
CNC VERT.
TURNING CENTER:
MORI SEIKI #VL55,
20" Hydr. 3 Jaw
Chuck, 26" Turn
Height, Fanuc
18TB CNC,
10 St. Turret,
2000 RPM,
Chip Conv., 40 HP,
1998, $74,500
CNC MACHINING CENTER, VERT.: HAAS #VF4,
50"X, 20"Y, 25"Z, 7500 RPM, #40 Tpr., Rigid Tap, 4th
Prewire, Chip Conv., 15 HP, 1998, $44,500
CNC MACHINING CENTERS, HORIZ.: MITSUBISHI #M-H5A,
7 Pallet Pool, 28"X, 24.8"Y, 23.6"Z, 19.7" x 19.7" Pallets,
10,000 RPM, #50 Tpr., 80 ATC, Cool/Thru Spindle, #M3
Meldas CNC, Rigid Tap., Chip Conv., 1994 $69,500
CNC MACHINING CENTER, HORIZ.: MORI SEIKI #MH63,
CNC MACHINING CENTER, VERT.: FADAL
CNC MACHINING CENTER, VERT.: FRYER #MC60,
39"X, 31.5"Y, 29.5"Z, (2) 24.8" X 24.8" Pallets, Fanuc
#VMC6030, 60"X, 30"Y, 30"Z, #40 Taper, 10,000 RPM,
60"X, 30"Y, 28"Z, Anilam 5300 CNC, 24 ATC, #40
15M CNC, 60 ATC, Cat. 50 Tpr., 3600 RPM, Chip
21 ATC, Fadal 88HS CNC, 1995, $46,500
Conv., 20 HP, 1989, $44,500
Tpr., 8500 RPM, Box Ways, 20 HP, 2000, $29,500
__________________________________________________________________________________________________________________________
5
CALL US WITH ALL YOUR MACHINERY NEEDS OR AVAILABLE SURPLUS.
CNC MILL, VERT.:
SOUTHWESTERN
"Trak DPM", Bed
Type, 3 Axis,
A.G.E. CNC, 10" x
50" Tbl., 30"X,
17"Y, 23.5"Z, #40
Tpr., 3 HP, 1997,
$19,500
MACHINING CENTER, VERTICAL: MAZAK #VTC20B, 40"X, 20"Y, 20"Z, #40 Tpr., 7000 RPM, Mazatrol
M32B CNC, 24 ATC, 15 HP, 1995, $34,500
CNC Machining Centers, Vert., cont.
MATSUURA #MC500V2, 20"X, 14"Y, 17.7"Z, #35 Tpr.,
6,000 RPM, Yasnac M5X CNC, 20 ATC, Tooling, 5 HP,
1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6,900
MAZAK #VTC-41M, 44"X, 16"Y, 20"Z, 7000 RPM,
Mazatrol EIA CNC, 24 ATC, 15 HP, 1994 . . . .$22,500
MAZAK #VTC-20B, 40"X, 20"Y, 20"Z, #40 Tpr.,
7000 RPM, Mazatrol M32B CNC, 24 ATC, 15 HP,
1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$34,500
MAZAK #VQC 20/50A, 23.6"X, 25"Y, 20"Z, Mazatrol
M2 CNC, 24 ATC, #50 Tpr, 10 HP, 1986 . . . . .$14,500
MILLTRONICS PARTNER 10, 100"X, 30"Y, 24"Z,
10,000 RPM, #40 Tpr., Centurian V CNC, 24" x 110"
Tbl., 12 ATC, 7-1/2 HP, Tooling, 1996 . . . . . . $42,500
MILLTRONICS #VM16, 30"X, 16"Y, 20"Z, #40 Tpr.,
6000 RPM, Centurian 6 CNC, 12 ATC, 7-1/2 HP,
1997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18,500
MIYANO #TSV-25, Drill & Tap, #30 Tpr., Fanuc OM
CNC, 19"X, 15"Y, 9-7/8"Z, 6K RPM, 12 St. Turret, 7-1/2
HP, 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12,750
MONARCH #VMC45B, Twin Pallet 18" x 42", 30"X,
18"Y, 24"Z, Fanuc 16M CNC, 6000 RPM, #50 Tpr., 26
ATC, Cool/Thru Spindle, 35 HP, Hi Torque Sp., Chip
Conv., 1995, (2), . . . . . . . . . . . . . . . . . . . . Ea. $14,500
MORI SEIKI #MV45/40, 31.5"X, 18"Y, 20"Z,
Yasnac MX2 CNC, #40 Tpr., 6,000 RPM, 20 ATC,
5.5 HP, 1985 . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,500
SHARNOA #SVC80, 80"X, 36"Y, 28"Z, #50 Tpr., Tiger
5 CNC, 20 ATC, 3600 RPM, 20 HP, 1992 . . . .$39,500
SHARNOA #HPM65, 65"X, 34"Y, 28"Z, #50 Tpr., Tiger
6 CNC, 30 ATC, 6000 RPM, 28 HP, 1995 . . . .$49,500
SHARNOA #HPM40, 40"X, 24"Y, 22"Z, #40 Tpr., Tiger
5 CNC, 30 ATC, 8000 RPM, 28 HP, 1995 . . . .$32,500
SHARNOA #SVC36, 35"X, 20"Y, 22"Z, #40 Tpr., Tiger
5 CNC, 24 ATC, 6000 RPM, 15 HP, 1995 . . . . .$9,950
TONGIL #TNV80, 29.5"X, 17.75"Y, 19.7"Z, Fanuc 11M
CNC, 40 Tpr., 30 ATC, 4,500 RPM, 25 HP, 1988 . .$9,500
TOYODA #FV45, 31.8"X, 18.1"Y, 20"Z, Fanuc 11M CNC,
32 ATC, #40 Tpr., 10 HP, 1988 . . . . . . . . . . . . . . .$17,500
CNC Milling Machines, Vertical
DAHLIH #CNC3, 13” x 51” Tbl., 31”X, 17”Y, 17”Z,
#40 NST, 3800 RPM, Anilam Series G CNC, 5 HP,
1987 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,500
6
CNC DRILL & TAP: BROTHER #TC-7315S,
Horiz. Spindle, Indexing Table, 8000 RPM,
Brother CNC840, 1995, $17,500
MACHINING CENTER, VERTICAL: LEADWELL
#MCV1300S, 51.9"X, 29.9"Y, 22"Z, Cat. 40 Tpr., Fanuc
OMF Conversational CNC, 30 ATC, 6000 RPM, 27" x
67" Tbl., 20 HP, 1993, $34,500
DYNA MYTE 2400 CNC Bench Top Mill, Dyna 2200
CNC, 6" x 13" Tbl., 10K RPM . . . . . . . . . . . . . .$2,950
HURCO "HAWK 5M" 3 Axis, 13" x 42" Tbl., 31"X,
14"Y, 6"Z, Ultimax 3/486 Twin Screen CNC, Pwr.
Draw Bar, 40 Tpr., 5 HP, 1995 . . . . . . . . . . . . $16,500
HURCO #KM-3P, 3 Axis, Ultimax II Twin Screen CNC,
24"X, 14"Y, 5"Z, 4K RPM, 3 HP, 1992 . . . . . .$10,950
LAGUN #FTV-2S, 3 Axis, Anilam 1100 CNC, 10" x 50"
Tbl., 27"X, 14"Y, 6"Z, #40 Tpr., Pwr. Draw Bar, 3 HP,
1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16,500
MAHO #MH800E, 23.6"X, 15.8"Y, 15.8"Z, #40 Tpr.,
Maho CNC, 1985, . . . . . . . . . . . . . . . . . . . . . . . .$9,500
MILLPORT #3KVH, 3 Axis, 10" x 50" Tbl., 30"X, 15"Y,
17"Z, 4250 RPM, Dynapath 20 CNC, #30 Tpr., 3 HP,
1986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,950
SOUTHWESTERN INDUSTRIES Trak TRM CNC
Bed Type Mill, Prototrak MX2 2 Axis CNC,
10" x 45" Tbl., 8400 RPM, Pwr. Draw Bar, 3 HP, 1993,
(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ea. $11,500
SOUTHWESTERN "Trak DPM", Bed Type, 3 Axis,
A.G.E. CNC, 10" x 50" Tbl., 30"X, 17"Y, 23.5"Z, #40
Tpr., 3 HP, 1997 . . . . . . . . . . . . . . . . . .
$19,500
SUPERMAX #YCM40, 3 Axis, Centroid M50 CNC, 9" x
49" Tbl., 4200 RPM, Graphics, 5 HP, 1996 . . .$9,950
SUPERMAX #YCM16VS, Anilam "M" 3 Axis CNC, 9"
x 49" Tbl., 27.5"X, 14.5"Y, 4.6"Z, 3 HP, 1988 . .$8,950
TREE #325 Journeyman, 3 Axis, 10" x 44" Tbl., 27"X,
14"Y, 6"Z, Dynapath Delta 20 CNC, Pwr. Draw Bar,
#40 Tpr., 3500 RPM, 5 HP, 1985, (2) . . . . .Ea. $6,200
DRILLS, GUN
DADSON #DS1012-CM, 1" Dia., 12" Length Cap., Ball
Screw Drive, 4400 RPM, 20 HP Hi Pressure Coolant,
5 HP, 1982 . . . . . . . . . . . . . . . . . . . . . . .
$19,500
DEHOFF #1036T, Twin Spindle, CNC, 1" Dia. Cap., 36"
Stk., Allen Bradley Panelview PLC 500 Control, HiPressure Coolant, Chiller, Chip Conveyor, 5 HP Heads,
30 HP Pump, 1998 . . . . . .(see page 3)
$99,500
DRILLS, MULTIPLE SPINDLE
BURGMASTER #1DCP, 6 Spindle Turret Drill, Auto.
Cycle, 1/2" Drill Cap., 24" x 40" Tbl., 1-1/2 HP, 1980 &
1978 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4,450
BURGMASTER #2CP, 6 Spindle Turret Drill, Auto. Cycle,
3/4" Drill Cap., 36" x 46" Tbl., 3 HP, 1979 . . . . . . .$5,450
CLAUSING 15" 4 Spindle, #16VC, #2 M.T., 20" x 60"
Tbl., 3/4 HP Vari Sp. Heads . . . . . . . . . . . . . . .$1,950
DRILL, GUN: DADSON #DS1012-CM, 1" Dia., 12"
Length Cap., Ball Screw Drive, 4400 RPM, 20 HP Hi
Pressure Coolant, 5 HP, 1982, $19,500
#HRG-1222-18 DEKA, 18 Sp., 3/4" Uppers, 10HP,
1982-1964 (5) . . . . . . . . . . . . . . . . . . . . . . . .Ea. $6,950
#H712 DEKA, 14 Spindle, 3/8” Uppers, Tapping, 2256
RPM, Spindles & Brackets, 3 HP, 1959 . . . . . . .$3,950
#F1B NATCO 24 Spindle, 3/4" Uppers, 17" x 28" Tbl.,
3077 RPM, 10 HP . . . . . . . . . . . . . . . . . . . . . . . .$6,950
#G19 NATCO, 24 Spindle, 1" Uppers, 19" X 28" Tbl.,
3077 RPM, Tooling, 10 HP, 1977 . . . . . . . . . . .$7,500
WALKER TURNER, 20", 3 Sp., 24" x 70" Tbl., #3 M.T., 1
HP Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$950
WALKER TURNER 2 Spindle, 24" x 36" Tbl., #3 M.T.,
2600 RPM, P.D.F., 2 HP Heads . . . . . . . . . . . .$1,250
WALKER TURNER, 20", 4 Sp., 24" X 70" Tbl., #2 M.T.,
1-1/2 HP Drives . . . . . . . . . . . . . . . . . . . . . . . . . . .$950
DRILLS, SINGLE SPINDLE
36" JOHANSSON, #5 M.T., 36-900 RPM, 10 HP, P.D.F.,
1960’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,750
30" CLEEREMAN #ADT, Auto. Cycle Drill & Tap, #5
M.T., Box Column, P.D.F., 24" x 22" Tbl., 1740 RPM,
15 HP, 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,500
25” SOLBERGA #SE2035 MBF, Geared, #2016 Ettco
Mult. Sp. Head, P.D.F., 2 HP, 1994 . . . . . . . . . .$3,450
25" SOLBERGA #SE1630, Geared Hd., #3 M.T.,
Manual Down Feed, 2200 RPM, 13" x 20" Tbl.,
1.5 HP, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,450
24” ARBOGA #3512, Geared Hd., #4 M.T., 60-1645
RPM, 18” x 20” Tbl., (3) . . . . . . . . . . . . . . .Ea. $2,450
24" PROGRESS #4E, #4 M.T., 21" Dia. Tbl., P.D.F., 852
RPM, 3 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,750
20" CLAUSING, #2286, #3 M.T., 24" x 40" Tbl., 2000
RPM, 1-1/2 HP Vari. Sp. Head, (2) . . . . . . .Ea. $1,950
20" CLAUSING #2234, 24" x 40" Prod. Tbl., P.D.F.,
(Air Cyl.), Commander #8-12 15 Sp. Mult. Sp. Hd.,
Coolant, 2 Hand Control . . . . . . . . . . . . . . . . . .$6,950
15" CLAUSING #1150, Vari. Sp. to 4000 RPM, #2 M.T.,
10" x 14" Tbl., 3/4 HP . . . . . . . . . . . . . . . . . . . . . .$950
15" CLAUSING #1672, 10" x 17" Tbl., Vari-Speed To
4000 RPM, 3/4 HP . . . . . . . . . . . . . . . . . . . . . .Ea. $675
6” HAMMER #R53 Hi Speed Bench Drill, 5” x 5”
Table, 6000 RPM, 1/4 HP . . . . . . . . . . . . . . . . . . .$225
SNOW Horiz. Drill, #HD1, #1 M.T., Air Operated, 1-1/2
HP, 1985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,950
LELAND GIFFORD #3SC Horiz. Drill Unit, #4 M.T.,
3200 RPM, 3 HP, (2) . . . . . . . . . . . . . . . . . .Ea. $1,250
DRILL,
RADIAL:
5' x 11"
G&L
BICKFORD
#952, 1600
RPM, Pwr.
Elev. &
Clamp,
Box Tbl.,
10 HP,
1976,
$12,500
__________________________________________________________________________________________________________________________
DRILL, RADIAL: 8' x 19" OOYA #RE3-2500, #6
M.T., 2180 RPM, Pwr. Elev. & Clamp, 15 HP, 1992,
$39,500
RADIAL DRILLS
8' x 19" CINCINNATI BICKFORD "Super Service", #6
M.T., Pwr. Elev. & Clamp, 800 RPM, 15 HP, 1947$17,500
8' x 19" OOYA #RE3-2500, #6 M.T., 2180 RPM, Pwr. Elev.
& Clamp, 15 HP, 1992 . . . . . . . . . . . . . . .
$39,500
6'7" x 19" OOYA #RE3-2000, #5 M.T., 2180 RPM, Pwr.
Elev. & Clamp, 15 HP, 1979 . . . . . . . . . . . . . . . . .$18,500
6' x 15" FOSDICK, #6 MT, Hydr., 14-1010 RPM, 15 HP,
Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,950
5' x 13" AMERICAN, #5 M.T., 1600 RPM, Pwr. Elev. &
Clamp, Box Tbl., Coolant, 15 HP, 1953 . . . . . .$7,950
5' x 11" G & L BICKFORD #952, 1600 RPM, Pwr. Elev.
& Clamp, Box Tbl., 10 HP, 1976 . . . . .
$12,500
4' x 13" IKEDA #RM1300, #5 M.T., 1440 RPM, Pwr.
Elev. & Clamp, Coolant, 5 HP, 1965 . . . . . . . . .$6,950
4' x 13" CARLTON #3A, #5 M.T., 1200 RPM, P.R.T., Pwr.
Elev. & Clamp, Tilt Box Tbl., 15 HP, 1966 . . . .$14,500
4' x 12" COMMANDER JOHANSSON, #5 M.T., 28" x
48" Tbl., Pwr. Elev., 1060 RPM, 10 HP, 1973 . .$8,950
4' X 11" IKEDA, #4 M.T., 5 HP, 38-1985 RPM .$P.O.R.
30" WALKER TURNER, 1/2" Dia. Cap., 18" x 26" Tbl.,
8300 RPM, 1/2 HP . . . . . . . . . . . . . . . . . . . . . . .$1,450
40" x 10" MASTER, #4 M.T., 1200 RPM, 20" x 38" Tbl.,
3 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,750
28" x 8" MODIGS #RBM28B, #3 M.T., 1535 RPM, 17"
x 17" Tbl., 1-1/2 HP . . . . . . . . . . . . . . . . . . . . . .$2,750
28" x 7-1/2" STANDARD MODERN, 17" x 17" Tbl.,
1384 RPM, 1-1/2 HP . . . . . . . . . . . . . . . . . . . . . .$3,450
4’ x 11” GIDDINGS & LEWIS BICKFORD
“Chipmaster”, #5 M.T., 1600 RPM, Pwr. Elev. &
Clamp., Coolant, Box Tbl., 1978 . . . . . . . . . . .$8,950
33” x 9” YODAGAWA #YMR, #4 M.M., 60-1590 RPM,
3 HP, Table, Power Elev., Coolant . . . . . . . . . .$1,250
30" x 6" COMMANDER JOHANSSON, #4 M.T., 20" x
40" Tbl., 1140 RPM, Pwr. Elev. & Cl., 3 HP . . .$3,850
EDM MACHINES
AGIE Pulse 30L, 3 Axis Sinker, 6" x 12" Mag. Ck. $6,950
AGIE #EMTI-10 Ram Type Sinker, #30L Agiepuls Pwr.
Supply, 9.8"X, 6.3"Y, 8"Z, 22" x 14" Tank, Orbiter,
Agiemat 3 CNC, 1986 . . . . . . . . . . . . . . . . . . . .$6,950
CHARMILLES ROBOFORM 20 CNC Conventional
Ram Type, 11.8"X, 9.8"Y, 9.8"Z, 15.6" x 11.8" Tbl.,
32 Amp Pwr. Supply, Charmilles CNC, 4 Pos. ATC,
1996 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500
EDM, CNC WIRE: MITSUBISHI 4 Axis, DWC-90C,
Table 16.5" x 20", Mitsu. W4 CNC, G10 Power
Supply, 1988, $16,500
BRAKE, PRESS, HYDR: 88 Ton AMADA #RG80, Hydr.,
98" O.A., 80" B.H., #NC9EX 3 Axis CNC B.G., 7-1/2 HP,
1986, $24,500
CHARMILLES ROBOFORM 20 CNC Conventional
Ram Type, 11.8"X, 9.8"Y, 9.8"Z, 15.6" x 11.8" Tbl.,
32 Amp Pwr. Supply, Charmilles CNC, 4 Pos. ATC,
1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500
ELOX, Ram Type, #HRP63, 75 Amp, T50S Pwr.
Supply, 12" x 20" Tbl., 8" Stk., D.R.O., 1970 .$2,500
ELOX, Ram Type, #8-62, 50 Amp Astra 50S Pwr.
Supply, 20” x 12” Tbl., 8” Stk., D.R.O., 1980 .$2,450
HANSVEDT Ram Type #SM150B 30 Amp Pwr.
Supply, 9” x 15” Tbl., 20 Amp Booster . . . . . .$2,950
MITSUBISHI #FX1 CNC Wire EDM, 14"X, 10"Y, 8.7"Z,
Mitsubishi W11FX CNC, Threader, Chiller, AE Pwr.
Supply, 25" x 21" Tbl., 1996 . . . . . . . . . . . . .$35,000
MITSUBISHI CNC Wire EDM, #DWC-90C, 4 Axis,
Mits. W4 CNC, 9.8"X, 11.8"Y, 16" x 20" Tbl., G10 Pwr.
Supply, 1988 . . . . . . . . . . . . . . . . . . . .
$16,500
FABRICATING
BRAKES
350 Ton LVD #PPEB350/14 CNC, Hydraulic, 177"
O.A., 136" B.H., #MNC95/C 6 Axis Gauging., Hydr.
Die Clamp, Flush Floor, 48 HP, 1996 .
$79,500
300 Ton CINCINNATI Series 120, Mech., 168" O.A.,
124" B.H., 11' x 3/8", 15 HP, 1953 . . . . . . . . . .$19,500
225 Ton DREIS & KRUMP #225D4, Mech., 78" O.A.,
54" B.H., 6' x 3/8", Hurco 5C CNC B.G., 10 HP,
1978 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500
135 Ton CINCINNATI Series 5-90-8, 10' O.A., 8'6"
B.H., 10' x 10 Ga. Cap., 8' x 3/16" Cap., CNC B.G., 71/2 HP, 1954 . . . . . . . . . . . . . . . . . . . . . . . . . . .$18,900
100 Ton NIAGARA #1B65-10-12, Mech., 12’ O.A.,
10’6” B.H., 20-50 SPM, 10’ x 10 Ga. Cap., 7-1/2 HP,
1974 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,500
90 Ton DIACRO Promecam #80-25, Hydr., Upacting,
8'3" O.A. Bed & Ram, 85" B.H., Dynabend CNC B.G.,
7-1/2 HP, 1984 . . . . . . . . . . . . . . . . . . . . . . . . .$17,500
88 Ton AMADA #RG80, Hydr., 98" O.A.,
80" B.H., #NC9EX 3 Axis CNC B.G., 7-1/2 HP,
1986 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$24,500
88 Ton U. S. INDUSTRIAL Model HB88-8CNC 96°± OAL
Bed, 78°± Between Housing, CNC Control of Back
Gauge Position and Ram Depth, Sick Model 4000 Light
Curtain, Stk. #71264 . . .Reg. $32,675 / Special $28,890
75 Ton DREIS & KRUMP #810C, Mech., 120" O.A., 102"
B.H., 24" Manual B.G., 5 HP, 1964 . . . . . . . . . . .$9,950
75 Ton DREIS & KRUMP #810C, Mech., 120" O.A.,
102" B.H., 10' x 14 Ga., 5 HP, 1960 . . . . . . . . .$9,950
BRAKE, CNC: 350 Ton LVD #PPEB 350/14,
Flush Floor, 6 Axis CNC, 177" Bed, 1996,
$79,500
75 Ton DIACRO #75-10, Hydr. Mech., 10' O.A., 102"
B.H., 1 Axis CNC B.G., Tooling, 10 HP, 1982 $14,500
55 Ton DREIS & KRUMP #68B, Mech., 96" O.A., 78"
B.H., Manual B.G., 3 HP, 1971 . . . . . . . . . . . . .$8,950
55 Ton LVD #55-BH-08N, 100" O.A., 80" B.H., MNC
800 CNC Back Gauge, 1986 . . . . . . . . . . . . .$12,500
25 Ton DREIS & KRUMP #SBA104, Hydr.
Speedibender, Auto. 4 Way Die Positioning, 120" x
16 Ga. Cap., Misc. Tooling, 7-1/2 HP, 1978 . .$14,500
25 Ton DREIS & KRUMP #265, Mech., 72" O.A., 61"
B.H., Hurco CNC B.G., 1959 . . . . . . . . . . . . . .$6,950
15 Ton DREIS & KRUMP, Mech., 4' O.A., 31" B.H.,
Hi-Lo Speeds, Manual B.G., 1974 . . . . . . . . . .$4,250
IRONWORKERS
AMEA CERTIFIED APPRAISERS ON STAFF.
IRONWORKER:
88 Ton MUBEA
KBL88-6,
Mechanical, 6" x
6" x 1/2", $9,250
MUBEA #KBL88-6, 88 Ton, 6" x 6" x 1/2" Angles, 3
Independent Slides, Coper/Notcher, (2) . .Ea. $8,950
MUBEA #88-6, Mech, 88 Ton, 6" x 6" x 1/2" Angles
3
Independent
Slides,
Coper/Notcher,
5.5 HP . . . . . . . . . . . . . . . . . . . . . . . . . . .
$9,250
MUBEA OPTIMA #48-4, Mechanical, 48 Ton, 4” x 4” x
3/8” Angles, 2 HP, Punches, 1974 . . . . . . . . . .$3,950
MUBEA #KBL-0, Mech., 38 Ton Punch, 3-1/2" x 3-1/2"
x 3/8" Angles, Coper/Notcher . . . . . . . . . . . . .$2,950
ROLLS
5’ x 1/4” U. S. INDUSTRIAL Model USR525 Initial Pinch,
Hardened Rolls, Power Forming Roll Adjustment, LED
Readout and Memory, Cone Rolling Attachment Stk.
#71307 . . . . . . .Regular Price $17,975 / Special $17,470
3' x 18 Ga. NEW DIMENSION #MP3-098-3,
2-1/2" Roll Dia. . . . . . . . . . . . . . . . . . . . . . . . . . .$1,750
SHEARS
20' x 1/2" ACCURSHEAR #850020, Hydr., Flush
Floor, 36" Pwr. B.G., Sq. Arm, Extra Blades, 50 HP,
$84,500
1983 . . . . . . . . . . . . . . . .(see page 3)
12' x 1/2" CINCINNATI #500HS X 12, Micro Computer
Gauge Ctrl. 48" FOBG, 12' Sq. Arm, 1995
. . . . . . . . . . . . . . . .(see Front Cover)
$59,500
12' x 3/16" WYSONG & MILES #7-144, Mech., 48"
Pwr. B.G., 10' Sq. Arm, 10 HP, 1970 .
$24,500
140" x 3/16" COLUMBIA #4PSG-10, Mech., 36"
Manual B.G., (2) 10' Sq. Arms, 7-1/2 HP, 1948$14,500
10' x 3/4" CINCINNATI #6210, Mech., 48" Pwr. Back
Gauge, 25 HP, 1960, . . . . . . . . . . . . . . . . . . . .$29,500
10' x 10 GA. CINCINNATI #1010, Mech., 36" Pwr.
Back Gauge, Sq. Arm, 5 HP, 1964 . . . . . . . . .$17,500
SHEAR, MECHANICAL: 12' X 3/16" WYSONG #7-144,
48" F.O.P.B.G., 10' Sq. Arm, Scrap Conveyor, 1970,
$24,500
__________________________________________________________________________________________________________________________
7
NO BUYERS PREMIUM • LOADING INCLUDED.
CNC PUNCH, SINGLE STATION: 44 Ton STRIPPIT
Super 750 SG, Smart Gage PC Based Control, 30" x
40" Axis Travel, Tooling, 1995, $32,500
FABRICATING, CONT.
SHEARS, CONT.
10' x 1/2" DREIS & KRUMP #OHS-10500, Hydr.,
36" Pwr. Back Gauge, Sq. Arm, Extra Blades, 20 HP,
$34,500
1973 . . . . . . . . . . . . . . . . . . . . . . . . . . .
10’ x 1/4” U. S. INDUSTRIAL Hydr., 36” Pwr B.G.,
Shadowline Light, Rear Drop Chute, Stroke Adj.,
Front Support Arms, Sq. Arm Stk. #71306
. . . . . . . . . . . . . . . . . .Reg. $27,185 / Special $26,795
10' x 1/4" CINCINNATI #1810, Mech., 24" Manual
B.G., 10' Sq. Arm, 7-1/2 HP, 1954 . . . . . . . . .$17,500
8' x 3/16" AMADA #M2545, Mech., 39" Programmable
Back Gauge, 90" Sq. Arm. 7-1/2 HP, 1984
$24,500
78" x 10 Ga. DARLEY CNC, #S2000X4, #DS04 Delem
CNC, Prog. B.G., Sq. Arm, 10 HP, 1989 . . . .$14,500
6' x 10 Ga. WYSONG #P4-312, Mech., 24" Front Op.
Manual B.G., Sq. Arm, 5 HP, 1960 . . . . . . . . .$8,950
52" x 14 Ga. WYSONG #1452, Mech., 24" B.G.,
1-1/2 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5,950
48" x 16 Ga. BARTH #161 Foot Shear . . . . . .$1,750
52" x 12 Ga. WHITNEY JENSEN #5212, Mech., 24"
Manual B.G., 34" Sq. Arm, 2 HP . . . . . . . . . . .$6,950
4' x 10 Ga. WYSONG #1048, Mech., 24" Manual B.G.,
3 HP, 1955 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6,450
44" x 16 Ga. NIAGARA Ring & Circle Shear #13R&C,
1/2 HP, 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,950
Shear Blades: Set of (2) 123" x 4-1/4" x 1" HC HC, 1"
Dia. Holes on 8" CC, (4 Sets) . . . . . . . . . . . .Ea. $875
SHEAR, HYDRAULIC: 10' x 1/2" DREIS & KRUMP
#OHS-10500, Hydr., 36" Pwr. Back Gauge, Sq. Arm,
Extra Blades, 20 HP, 1973, $34,500
Punch, Turret, CNC: 22 Ton STRIPPIT #SPM500,
19.7" x 39" Sheet Cap., Auto. Repo., Max. Thickness
1/4", 10 St. Turret, 1989 . . . . . . . . . . . . . . . . .$12,500
Punch, Single End: 22.5 Ton TRUMPF Copy Press &
Nibbler, #CS-20, 53" Throat, 79"X, 39"Y, 35" x 118"
w/extensions,
Dupl.
Stylus,
Tooling,
Tbl.
1979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,750
Punch: 30 Ton WHITNEY Model 635A, Single End,
36” Throat, Working Table 104” x 60”,
144” Positioning Bar, Quantity of Punches &
Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,250
Tank Welding Roll: VANGUARD Mdl. HGK-10, 13”110” Dia., Vari-Speed, 22,000 lb. Weight Cap., 12’
Hand Pendant Control, NEW . . . . . . . . . . . . . .$8,300
Tube Bender: 2" CRITERION #50000, Compression,
Single Hd., 2" Dia. x .095", 0-180 Degree, Allen
Bradley PLC Control, 1998, (2) . . . . . . . . .EA. $9,500
Tube Bender: 2" PINES #2, Mandrel Extractor,
Degree of Bend, 7-1/2 HP, 1954 . . . . . . . . . . . .$6,500
Tube Bender: 1-3/8" PINES #3/4, Hydr. Mandrel
Extractor, 10 Pos. Degree of Bend Selector, Tooling,
1989 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15,500
Tube Bender: 1-3/8" PINES #3/4, Hydr. Mandrel
Extractor, 10 Pos. Degree of Bend Selector, Tooling,
1976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,950
Tube Bender: 1-1/4" HILMOR #DB32, Hydr., 190 Deg.
Max. Angle, Mandrel Extractor, 3 HP, 1978 . .$6,950
Tube Bender: 1-1/4" HILMOR #DB32, Hydr., 190 Deg.
Max. Angle, Mandrel Extractor, 3 HP, 1988 . .$6,950
MISC. FABRICATING
Notcher: 1/4" x 8.6" x 8.6" EUROMAC #Multi 220/6,
Hydr., Vari-Angle 30 - 140 Deg., Rear Punch St., 5 HP,
1997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,000
Plasma Cutter: C & G SYSTEMS, Burny 3 CNC, 52"
x 52" Tank Size, 140 Amp Cap., 1992 . . . . . . .$9,500
Punch, Single End CNC: 44 Ton STRIPPIT "Super
750SG", 40"X, 30"Y, Smartgage PC Control, Tooling,
7-1/2 HP, 1995 . . . . . . . . . . . . . . . . . . .
$32,500
Punch, Turret, CNC: 45 Ton WIEDEMANN "Magnum
5000", 60" x 72" Sheet Cap., Auto. Repo., (2) Auto.
Index St., Plasma, 52 Sta. Turret, Fanuc OP-B CNC,
1992 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$89,500
Punch, Turret, CNC: 22 Ton STRIPPIT #FC1000R,
51"X, 40"Y, (2) Auto. Index, 20 St. Turret, Auto.
Repos., Mac CNC Control, Large Assortment
Tooling, 1993 . . . . . . . . . . . . . . . . . . . . . . . . . .$29,500
SHEAR, MECHANICAL: 8' x 3/16" AMADA
#M2545, Mech., 39" Programmable Back Gauge,
90" Sq. Arm. 7-1/2 HP, 1984, $24,500
Tube Bender: 1-1/4" SMS #5TB (Pines 5T) Vertical,
Hydraulic, 20 HP . . . . . . . . . . . . . . . . . . . . . . . .$3,950
Tube Bender:
1-1/8" PINES #1400, Mandrel
Extractor, Degree of Bend, 3 HP, 1973 . . . . . .$5,950
Tube, End Forming: 3" DICKEY & SON Hydr.
Rotary End Forming, 5/8" to 2-3/4" Tube Dia. Cap., 15
HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$12,500
Tube End Forming: 4" IPS LEONARD (CONRAC)
#M343 Tube End Flanger,1/2" to 4" IPS, 5 HP,
Tooling, 1967 . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500
Tube End Forming: 6" IPS LEONARD (CONRAC)
#M369 Tube End Flanger, 1/2" to 6" IPS, 15 HP,
Tooling, 1965 . . . . . . . . . . . . . . . . . . . . . . . . . .$57,500
GRINDERS
CYLINDRICAL
14" x 72" NORTON #U-4, Univ., 14" Wheel, Internal
Spindle, 7-1/2 HP, 1966 . . . . . . . . . . . . . . . . . . $5,500
14" x 48" WARNER & SWASEY NORTON #U4, Hydr.,
Univ., Internal Attach., D.R.O., Tooling, 16" x 1-1/2"
Wheel, 7-1/2 HP, 1972 . . . . . . . . . . . . . . . . . . $18,500
12" x 40" TOS Hydr. Univ., #BUB 32/1000, Auto.
Cycle, Tos #K51 Programmable Teach Control, Ball
Screw Infeed, Plunge, 13 HP, 1993 . .
$19,500
12” x 20” TOYODA #GP15-50, Hydr., Plain, Plunge,
Coolant, 1971 . . . . . . . . . . . . . . . . . . . . . . . . . .$6,950
10" x 20" SMTW #MMB1420A, Univ., Plunge, D.R.O.,
12" x 1-1/2" Wheel, Int. Attach., 1996 . . . . . . .$8,900
10" x 18" JONES & SHIPMAN #1074, Hydr.,
Univ., Hydr. Dresser, 16" x 1-1/2" Wheel, Coolant,
1980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,950
8" x 20" SHIGIYA (OKAMOTO) #GUA-20-50, Univ.,
Auto Plunge Cycle, D.R.O., 12" x 1" x 5" Wheel,
Coolant, 3 HP, 1982 . . . . . . . . . . . . . . .
$14,900
6" x 18" LANDIS #2R, Plain, 24" x 2" Wheel, Plunge,
7-1/2 HP, 1966 . . . . . . . . . . . . . . . . . . . . . . . . . .$8,950
CNC TURRET PUNCH: 45 Ton WIEDEMANN Magnum
5000 With Plasma, 60" x 72" Max. Sheet Size, Auto. Repo.,
Auto. Index, Fanuc OP-B CNC Control, 1992, $89,500
GRINDER, CYLINDRICAL:
8" x 20" SHIGIYA
(OKAMOTO) #GUA-20-50, DRO, Chuck, 1982, $14,900
8
TUBE END FORMING: 3" DICKEY & SONS Rotary
TUBE END FORMING:
6" IPS LEONARD
GRINDER, CYLINDRICAL: 12" x 40" TOS HOSTIVAR
Tube End Forming, Hydr, Cap. 5/8" To
Hydr. #BUB32/1000, Prog. Teach Control, Auto Cycle,
(CONRAC)
#M369
Tube
End
Flanger,
2-3/4", Self-Contained Hydr. Unit, $12,500
Ball Screw Infeed, 1993, $19,500
1/2"
to 8" IPS, 15 HP, Tooling, 1965 $57,500
__________________________________________________________________________________________________________________________
5" x 12" MYFORD #MG12-HPT, Hydraulic, Plunge,
Dresser, Coolant, 3 HP, 1979 . . . . . . . . . . . . .$16,500
5" x 12" MYFORD, #MG-12, Motorized Workhead,
Tailstock, Dresser, 1963 . . . . . . . . . . . . . . . . . .$3,950
JIG
#3 MOORE, 11" x 24" Tbl., 2 Grinding Heads, D.R.O.,
Tooling, 1960 . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,950
#2 MOORE, 10” x 19” Tbl., 16-1/2” Long. Trav., 2
Heads, 10” Rot. Tbl., 1961 . . . . . . . . . . . . . . . .$4,950
#2 MOORE, 10” x 19” Tbl., 16-1/2” Long. Trav., 4
Heads, Tooling, Mitutoyo DRO, 1967 . . . . . . .$6,500
#2 MOORE, 10" x 19" Tbl., 1 Grinding Hd., SONY
D.R.O., 1955 . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,950
RIGHT ANGLE JIG GRINDING ATTACHMENT:
MOORE, (2) . . . . . . . . . . . . . . . . . . . . . . . . . .Ea. $850
SURFACE
24" x 24" x 48" MATTISON HYDR., "Die Block",
Magnetic Chuck, Dresser, 28" x 3" Wheel, Pwr. Elev.,
Coolant, 20 HP, 1970 . . . . . . . . . . . . . . . . . . .$19,500
24" x 40" PROTH #PSG-60100 AHR, Hydr., Incr.
Down Feed, D.R.O., Mag. Chuck, 14" x 2" Wheel,
Coolant, 7-1/2 HP, 1987 . . . . . . . . . . . . . . . . .$14,500
20" x 48" MATTISON, Hydr., Incr. Downfeed,
Magnetic Chuck & Controls, Dresser, Coolant, 20 HP
1965 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500
18" x 24" x 60" MATTISON "Die Block", Hydr., Incr.
Downfeed, Dresser, Mag. Chuck, Coolant/Filtration,
25 HP, 1967 . . . . . . . . . . . . . . . . . . . . . . . . . . . $16,500
14" x 40" ELB #SW010VA11, Hydr., Auto. Down Feed,
Dresser, Coolant, 12 HP, 1971 . . . . . . . . . . . . .$7,500
14" x 28" PROTH #PSGS 3570AH, Hydr., Auto.
Down Feed, Mag. Chuck, Dresser, Cool/Dust, 3 HP,
1984, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,950
12” x 36” BROWN & SHARPE Micromaster
#1236, Hydr.,Mag. Chuck, Pwr. Elev., Coolant, 5 HP,
1970 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,950
12" x 24" ACER #AGS 1224AHD, Hydr., Incr. Down
Feed, Dresser, D.R.O., Coolant, 5 HP, 1992 .$11,500
12" x 24" CHEVALIER #FSG-1224AD, Incr. Down
Feed, Mag. Chuck, Coolant, 5 HP, 1990 . . . .$12,500
12" x 24" KENT #KGS63 AHD, Hydr., Incr. Down
Feed, Dresser, Mag. Chuck, Coolant, 5 HP,
1992 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$12,500
12” x 24” GALLMEYER & LIVINGSTON #370, Hydr.,
5 HP, Electro Chuck, I.D.F., Coolant, 1966 . . .$9,950
GRINDER, SURF., ROTARY: 20" ABWOOD #RG1,
Horiz. Rotary, 20" Mag. Chuck, Hydr. Dresser, 14" x
2" Wheel, Cool/Filt., 15 HP, 1988, $32,500
12" x 24" OKAMOTO #12-24EX, CNC, Fanuc CNC,
Auto. Cycles, Dresser, Mag. Chuck, Coolant, 5 HP,
$37,500
1998 . . . . . . . . . . . . . . . . . . . . . . . . . . .
12” x 24” THOMPSON Model BB, Hydr., 20” x 2”
Wheel, 10 HP, D.R.O., Incremental Down Feed,
Chuck, Over Wheel Dresser, Coolant, 1966 . .$3,500
10" x 24" JAKOBSEN #SJ30, Hydr., Incr. Down Feed,
Fine Line Mag. Chuck, Hydr. Dresser, Coolant,
3-1/2 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,950
10" x 24" PROTH #PSGS 3060BH, Hydr., Incr. Down
Feed, Dresser, Coolant, 3 HP, 1984 . . . . . . . .$6,950
10" x 20" ACER #AGS-1020AHD, Incr. Down Feed,
8" x 18" Mag. Chuck, Dresser, Coolant, 2 HP,
1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,950
10" x 20" CHEVALIER #FSG1020AD, Hydr., Incr.
Downfeed, Dresser, Mag. Chuck, Coolant, 3 HP,
1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10,500
10” x 16” COVEL #17-H, Hydr., Mag. Chuck,
12” Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,950
10” x 15” LANDIS ABRASIVE #1-1/2, Hand, Perm.
Mag. Chuck, 12” Wheel, 1961 . . . . . . . . . . . . .$1,950
8” x 24” GALLMEYER & LIVINGSTON #350, Hydr.,
5 HP, Chuck, Coolant, 1963 . . . . . . . . . . . . . . .$4,950
8” x 18” BROWN & SHARPE “Dial-A-Size”, Hydr.,
Auto Cycle, Dresser, Mag. Chuck, Coolant, 2 HP,
1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,750
GRINDER, ROTARY: 60” KOYO MATTISON #60,
Mag. Chuck, 1/2” Chuck Life, 100 HP $48,500
6” x 18” HARIG #618 Slicer, Slicing, Slotting & Surf.
Grinding, 3 Axis Auto., Mag. Chuck, 1 HP, 1981 $4,750
6" x 12" HARIG #612, Hand, Fine Line Mag. Chuck,
1 HP, 1982-1986, (6) . . . . . . . . . . . . . . . . . . . . .$P.O.R.
6" X 12" HARIG #612 Ballway, Hand, Fine Line Mag.
Chuck, 1-1/2 HP, 1993 . . . . . . . . . . . . . . . . . . . .$3,250
6” x 12” HARIG SUPER 612, Hand Feed, 7” Wheel,
1970 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,750
6" x 12" MITSUI #200MH, Ball Ways, Fine Line Mag.
Chuck & Control, Sony D.R.O., 1-1/3 HP, 2000$9,950
6" x 12" MITSUI #200MH, Hand, Ball Ways, D.R.O.,
Mag. Chuck, Coolant, 1-1/3 HP, 1990 . . . . . . .$6,950
6" x 12" MITSUI #200MH, Hand, Ball Way, Fine Line
Mag. Ck. & Controls, Sony D.R.O., 1-1/3 HP, (4) 1997$P.O.R.
1979 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6" x 12" BOYAR SCHULTZ #612, Hand, Fine Line
Mag. Chuck, 3/4 HP, 1965 . . . . . . . . . . . . . . . . .$1,750
6" x 12" BROWN & SHARPE "MICROMASTER", Hand
Feed, Fine Line Mag. Chuck, 1 HP, 1960, (2) Ea. $2,250
5" x 10" BROWN & SHARPE MICROMASTER, Hand Feed,
Fine Line Mag. Chuck, Hi-Speed Spindle, 1965 . . .$1,950
ROTARY
84" MATTISON, Seg. Chuck, 90" Swing, 30" Vert.,
145 HP, 1968, In Operation, In Plant . . . . . . . .$P.O.R.
8" x 18" KENT #KGS-250AHD, Incr. Down Feed, Mag.
Chuck, Coolant, Dresser, 1-1/2 HP, 1982 . . . .$6,950
60" BLANCHARD #32-60, 60" Mag. Chuck With
3/4" Life, 24" Vert., Dresser, Coolant, 100 HP,
$79,500
1966 . . . . . . . . . . . . . . . .(see page 3)
6” x 18” BROWN & SHARPE Micromaster, Hand,
Magnetic Chuck, Coolant, 1 HP, 1971, Factory
Rebuilt 1987 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,750
42" BLANCHARD #22K42, 42" Mag. Chuck With
1/2" Life, 24" Vert., Dresser, Coolant, 50 HP,
1970's . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29,500
6" x 18" OKAMOTO #PFG450A, Incr. Down Feed,
Dresser, Mag. Chuck, Coolant, 1 HP, 1989 . .$10,500
6” x 18” BROWN & SHARPE Micromaster, Hydr.,
8” Dia. Wheel, 1.5 HP, Chuck, 1975 . . . . . . . . . .2,750
6" x 18" HARIG, Super 618, Hand., Mag. Chuck, 1 HP,
1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,450
6" x 18" REID #618HA, Hand Feed, Fine Line Mag.
Chuck, 1 HP, 1971 . . . . . . . . . . . . . . . . . . . . . . .$2,450
6” x 18” GARDNER, #M30701, Hydr., 1 HP, 8” x 3/4”
Wheel, Fine Line Chuck, Coolant, 1967 . . . . .$2,500
6" x 18" HARIG #618 Auto., Pwr. Long. & Cross,
D.R.O., Mag. Chuck, Coolant, 1 HP, 1985 . . . .$6,950
NEW IMPROVED WEBSITE: www.raco.com
CNC GRINDER, SURF., HORIZ.: 12" x 24" OKAMOTO
#12-24EX, CNC, Fanuc CNC, Auto. Cycles, Dresser,
Mag. Chuck, Coolant, 5 HP, 1998, $37,500
60” KOYO MATTISON #60, Max. Sw. 73”, 24” Under
Wheel, 100 HP, 1974 . . . . . . . . . . . . . .
$48,500
42" MATTISON #24-42, Mag. Chuck, Dresser, 24"
Vert., 60 HP, 1967 . . . . . . . . . . . . . . . . . . . . . .$22,500
42” KOYO MATTISON #24, Max. Sw. 47”, Max. Height
17.7”, 75 HP, 1971 . . . . . . . . . . . . . . . . . . . . . .$17,500
36" BLANCHARD #20K36, 75 HP Geared Head,
Dresser, Coolant, 1/2" Chuck Life, 1971 . . . .$29,500
36”
BLANCHARD
#20-36,
Mag.
Chuck,
Dresser, 12” Vert., Coolant, 35 HP, 1/2” Chuck Life,
1966 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18,000
36" HANCHETT #24, Mag. Chuck, 5/8" Chuck Life,
Coolant, 20 HP . . . . . . . . . . . . . . . . . . . . . . . . . .$7,500
GRINDER,
SURFACE:
6” x 12” MITSUI
#200 MH,
Manuals, Mag.
Chuck, Some
With DRO,
1979-2000 (4) Ea.
$4,450 to $9,950
GRINDER, SURFACE, ROTARY: 30" ARTER #B30, Horiz.
GRINDER, SURFACE: 12" x 24" KENT
Sp., 31" Mag. Chuck With 3/4" Life, Auto. Wheel
#KGS63AHD, Hydr., Incr. Downfd., O.W.D.,
Balance System, Tilt Tbl., 10 HP, 1953, $23,500
Coolant,
1992, $12,500
__________________________________________________________________________________________________________________________
9
FOR FULL SPECS & PHOTOS: VISIT OUR WEBSITE: www.raco.com • EMAIL US: [email protected]
10
GRINDER, SURFACE, ROTARY: 24" CINCINNATI
HEALD #361-24 Horiz. Sp., 24" Mag. Chuck,
Coolant, 15 HP, 1977, $32,500
ROTARY, cont.
30" ARTER #B30, Horiz. Sp., 31" Mag. Chuck With
3/4" Life, Auto. Wheel Balance System, Tilt Tbl., 10
$23,500
HP, 1953 . . . . . . . . . . . . . . . . . . . . . . . .
24" CINCINNATI HEALD #361-24 Horiz. Sp., 24" Mag.
$32,500
Chuck, Coolant, 15 HP, 1977 . . . . . . .
20" ABWOOD #RG1, Horiz. Rotary, 20" Mag. Chuck,
Hydr. Dresser, 14" x 2" Wheel, Cool/Filt., 15 HP,
1988 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$32,500
13" ARTER #D12, Horiz. Sp., 12" Mag. Chuck, 16" x
2" Wheel, 7-1/2 HP . . . . . . . . . . . . . . . . . . . . . . .$2,950
13" ARTER #D12, Horiz. Sp. Rotary Grinder, Mag.
Chuck, Tilt Tbl., 16" x 2" WHeel, 7-1/2 HP,
1950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,950
12" HEALD #22, 12" X 1" Wheel, 5 HP,
Coolant, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,850
SWISHER, Mark V, Vert., Incr. Downfeed, Coolant,
7-1/2 HP, 1985 . . . . . . . . . . . . . . . . . . . . . . . . . .$4,250
TAYCO "Speedi-Grind" #TSG5000AT, Vert. Sp., 6" x
12" Mag. Chuck, Incr. Down Feed, 8" Dia. Wheel, 71/2 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6,950
MISCELLANEOUS GRINDERS
Belt Grinder: 52" AMADA Timesaver #252-2BCMW,
Bottom Type Dbl. Head Belt/Brush, Vacuum Bed,
Coolant, 1996 . . . . . . . . . . . . . . . . . . . . . . . . . .$27,500
Belt Grinder:
37" TIMESAVER #137-1HDMW,
Hvy. Duty, 37" x 60" Belt, 15-45 FPM, Coolant, 20 HP,
1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12,500
Belt Grinder: 36" GRINDINGMASTER #2075-M, Wet
Dust Collector, 18 HP, 1992 . . . . . . . . . . . . . . .$9,950
Belt Grinder: 37” AEM #370 “American Pro”, 10-50
FPM, Coolant, 20 HP, 1991 . . . . . . . . . . . . . . . .$9,500
Belt Grinder: 24" TIMESAVER #225-1M, 25" X 75"
Abrasive Belt Size, 15 HP . . . . . . . . . . . . . . . . .$4,950
Centerless Grinder: #220-8 CINCINNATI, CNC Servo
Dressers, Micro Processor Control, Magazine
Loader, 1987 . . . . . . . . . . . . . . . . . . . .
$32,500
Centerless Grinder: #220-8 CINCINNATI, 3" Dia. Cap.,
Infeed Rest, Hydr. Dressers, 20 HP, 1963 . . . .$19,500
Centerless Grinder: Cinco 15 CINCINNATI, 3" Dia.
Cap., Infeed Rest, Hydr. Dressers, 15 HP, 1966$16,500
Die & Profile Grinder: MASTER #OP, 2 HP, Max.
Wheel 5”, Oscillating Spindle, Dust Collector $1,150
Drill Grinder: 3" BRIERLEY #ZB80, Semi-Auto, 80 to
180 Deg. Angles, 6 Jaw Chuck, Dresser, Coolant,
1976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6,950
Drill Grinder: 1-1/4" RUSH #132CS, Semi-Auto., 40
to 180 Deg. Angles, 6 Jaw Ck., 1/2 HP, 2000 .$4,950
GRINDER, CENTERLESS: #220-8 CINCINNATI,
CNC Servo Dressers, Micro Processor Control,
Magazine Loader, 1987, $32,500
Drill Grinder: 1-1/4" LISLE #DG-3, 1/3 HP Motor $125
Finishing Grinder: 36” AEM #CS360 Multi Directional
Deburring, Finishing & Surf. Conditioning Mach.,
Vacuum Belt, Coolant/Filtration, 48” Abrasive Disc,
7-1/2 HP, 1994 . . . . . . . . . . . . . . . . . . .
$19,500
Finishing Grinder: 36" AEM Multi-Directional
#CS360-MDDM, Single Head Edge Deburring,
Finishing & Surface Conditioning, 48" Dia. Disc,
4000 SFPM, 7-1/2 HP, 0-5" Bed Opening, 1989$2,950
Internal Grinder: #271 HEALD, 2 Spindle, CS Head,
1960 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,950
Profile Grinder: #2 BOYAR SCHULTZ, 2 Spindle, 20"
x 18" Tilt Tbl., Dresser . . . . . . . . . . . . . . . . . . .$2,950
Slicing, Slotting & Surface Grinder: 6” x 18” HARIG
#618 Slicer, 3 Axis Auto., Vari-Speed Spindle, Mag.
Chuck, 1 HP, 1981 . . . . . . . . . . . . . . . . . . . . . . .$7,950
Slideway Grinder: 24” x 120” CHURCHILL
#VB, 2790 RPM, 1.75 HP, Side Face
Grinding
Attach
21-1/2”
Transverse
Adjustment of Wheelhead Toward & Away
From Column . . . . . . . . . . . . . .
$13,900
Tap Ginder: #1100 HYBCO, Chamfer & Flute Hds.,
Dressers, Collets, 1967 & 1964, (2) . . . . . . . .$P.O.R.
Thru Feed Grinder: #615TFG SPEEDFAM, 6" Wide x
6" Ht Cap., 0-36 FPM, Coolant, 15 HP, 1984 . .$12,500
Cutter Grinder: 30" INGERSOLL, 4"-30" Cutters,
6" Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,750
Tool Grinder: #1900 HYBCO Univ., 8" x 50" Tbl., #2100
Pwr. Relieving Fixture, Tooling, 1970 . . . . . . . .$4,450
Tool & Cutter: #2 CINCINNATI, Tilt Head, Univ.
Workhead, Footstocks, Tooling, 1 HP, 1988-1982,
(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Each $7,950
Tool & Cutter: #2 CINCINNATI, Univ. Workhead, 5” x
36” Tbl., Tooling, 1 HP, 1965 . . . . . . . . . . . . . .$2,950
Tool & Cutter:
CINCINNATI Monoset, Power
Workhead, Chuck, 1964 . . . . . . . . . . . . . . . . .$5,950
Tool & Cutter Grinder: #13 BROWN & SHARPE, M/D
Workhead, 1 HP, 1952 . . . . . . . . . . . . . . . . . . . .$2,950
Tool & Cutter: #13 BROWN & SHARPE, 6” x 42” Tbl.,
Pwr. Long., 1 HP, Tooling, 1967 . . . . . . . . . . . .$3,950
Tool & Cutter: #SU2 KUHLMANN, Single Lip,
5/8" - 2-3/8" Length, 0-180 Deg. Angle, 1/4 HP, Bench
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,750
Tool & Cutter: #5 HARTEX Tangent Arc Profile
Grinder, 1 HP . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,750
Tool Post Grinding Attachment: DUMORE Series 5,
1/2 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$550
GRINDER, SLIDEWAY: 24” x 120” CHURCHILL #VB,
2790 RPM, 1.75 HP, Side Face Grinding Attachment,
21-1/2” Transverse Adjustment of Wheelhead Toward
and Away From Column $13,900
ENGINE LATHES
112" x 312" CRAVEN Hvy. Duty, 4 Way Bed, 96"
Faceplate W/4 Jaws, 2 Front & 2 Rear Carriages, 2 St.
Rests, 36 RPM, 60 HP . . . . . . . . . . . . . . . . . . . .P.O.R.
64" x 16' NILES Heavy Duty, 60" Face Plate, 40 HP,
1943 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500
60" LANSING Facing Lathe, #TADFS-750, 200 RPM,
24" 3 Jaw Chuck, 10 HP, 1970's . . . . . . . . . .$24,500
50" x 240" POREBA #TCG125, Hvy. Duty, 49" 4 Jaw
Chuck, 315 RPM, P.R.T., Pwr. Tailstock, D.R.O., 100
$129,500
HP, 1975 . . . . . . . . . . . .(see page 3)
50" X 20' LANSING (80086) #SP1250/6000, Hvy. Duty,
Taper, Chuck, 500 RPM, 3-1/2" Sp. Bore, 40 HP, 1984
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$P.O.R.
46" x 84" AMERICAN Pacemaker Hvy. Duty, 34" Face
Plate, 600 RPM, Scanomatic Tracer Attach., 25 HP,
1951 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34,500
34" x 120" MAZAK, Hvy. Duty, 4 Jaw Chuck, D.R.O., 41/16" Sp. Bore, 1200 RPM, 20 HP, 1982
$37,500
32" x 140" WMW #DLZ800III, Hvy. Duty, Taper,
Chuck, 710 RPM, 3-1/2" Sp. Bore, 1958 . . . .$14,500
32/40" x 80" IKEGAI #DA35, 3 & 4 Jaw Chucks, P.R.T., 1000
RPM, Tracer Attach., Tooling, 25 HP, 1967 . . .
$27,500
32"/40" x 79" SZIM, 3 & 4 Jaw Chucks, Taper, D.R.O.,
900 RPM, 24 HP, 1979 . . . . . . . . . . . . . . . . . . .$18,500
30"/56" x 96"/156" LEBLOND Sliding Gap Bed, Taper,
400 RPM, 46" Face Pl. W/4 Jaws, 15 HP . . . .$19,500
26"/35" x 120" DALIAN Gap Bed, CDS-26120C,
DRO, Chucks, Steady, Tpr Attach., NEW, Stk.
#71245 . . . . . . . . . . . . . . . . . . . . . . . . .
$25,950
26”/34” x 120” TOS #SN63, Chuck, 1000 RPM,
15 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12,750
26" x 96" LEBLOND Hvy. Duty, #2516, Taper, Chuck,
1300 RPM, D.R.O., 30 HP . . . . . . . . . . . . . . . .$19,500
25" x 144" MONARCH #2516, Hvy. Duty,
3 Jaw Chuck, Taper, 3 Steady Rests, 1750 RPM,
20 HP, 1962 . . . . . . . . . . . . . . . . . . . . . . . . . . .$24,500
25" x 80" TOOLMEX (WAFUM) #TUR63A, 5-1/2" Sp.
Bore, Fr. & Rear Mount 19" 3 Jaw Chucks, Taper,
1,120 RPM, 17.5 HP, 1979 . . . . . . . . . .
$24,500
22"/32” x 120" DALIAN, NEW, 4-1/8" Bore, Gap,
Taper, Chucks, Complete Tooling . . . . . . . . .$19,900
GRINDER,
FINISHING:
36" AEM #CS360
Multi Directional
Finishing Machine,
48" Disc,
36" Conv. Belt,
1994, $19,500
LATHE, ENGINE: 34" x 120" MAZAK, Hvy. Duty, 4
Jaw Chuck, D.R.O., 4-1/16" Sp. Bore, 1200 RPM, 20
HP, 1982, $37,500
LATHE, ENGINE: 32/40" x 80" IKEGAI #DA35, 3 &
4 Jaw Chucks, P.R.T., 1000 RPM, Tracer Attach.,
Tooling, 25 HP, 1967, $27,500
__________________________________________________________________________________________________________________________
22" x 96" CINCINNATI Hydrashift, Taper, 3 & 4 Jaw
Cks., 980 RPM, 5 HP, 1967 . . . . . . . . . . . . . . . .$8,950
21/27" x 60" MAZAK Mark II, Taper, Chuck, Tooling,
1500 RPM, 15 HP, 1978 . . . . . . . . . . . . . . . . . .$14,500
20/22" X 120" MONARCH, 16" Chuck, Tool Post,
Steady Rest, 15 HP . . . . . . . . . . . . . . . . . . . . .$10,950
20" x 120" NARDINI #SZ20120-T, Taper, D.R.O.,
Chucks, Tooling, 3-1/8" Bore, 1500 RPM, 12-1/2 HP,
1991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,950
20” x 78” MONARCH “Toolmakers” #2013T, 1750
RPM, Chucks, 20 HP, 1959 . . . . . . . . . . . . . . . .$6,950
20" x 60" DALIAN, NEW, 3-1/8" Bore, Taper, Chucks,
Complete Tooling, Stk. # 71218 . . . . . . . . . . .$11,750
20" X 60" LODGE & SHIPLEY, Hvy. Duty, 18" Bed
Extention For 78" CC, 3 & 4 Jaw Chucks, 500 RPM,
Tooling, 15 HP, 1943 . . . . . . . . . . . . . . . . . . . . .$7,950
19/27" x 80" SUMMIT #19-3-80, Taper, Chuck, 3" Sp.
Bore, 1500 RPM, 7-1/2 HP, 1974 . . . . . . . . . . . $9,950
19" x 80" LEBLOND Regal, 6 Jaw Chuck, D.R.O.,
1000 RPM, 7-1/2 HP, 1965 . . . . . . . . . . . . . . . . .$8,950
19/27" x 40" SUMMIT #19-4, Taper, Chucks, 4-1/2"
Sp. Bore, 1500 RPM, Tooling, 7-1/2 HP, 1978 $8,950
18/20-1/2" X 72" MONARCH, Taper, 3 & 4 Jaw
Chucks, 700 RPM, 7-1/2 HP, 1942 . . . . . . . . . .$5,950
18" x 78" PRATT & WHITNEY #C-M1696, Taper, 3 & 4
Jaw Chucks, D.R.O., Tooling, 1,000 RPM, 7-1/2 HP,
1953 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,950
18" x 60" LODGE & SHIPLEY Hvy. Duty, Taper,
Chuck, 1160 RPM, 10 HP, 1954 . . . . . . . . . . . .$6,950
17/24" x 60" DEAN SMITH & GRACE #1709, Taper,
Chuck, 2000 RPM, 15 HP, 1976 . . . . . . . . . . . .$9,900
17" x 42" SHELDON #R17, Chucks, 2150 RPM, 5 HP,
1967 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,950
17"/25" x 40" WEBB #WL435, 3 & 4 Jaw Chucks,
1800 RPM, Tooling, 5 HP, 1980 . . . . . . . . . . . .$8,950
16" X 60" HARRISON #M400, Chuck, D.R.O., 2,000
RPM, 10 HP, 1980 . . . . . . . . . . . . . . . . . . . . . . .$9,950
16” x 60” SHARP Model 1660LV w/Hi/Lo Headstock
Gears and Infinitely Variable Inverter Spindle
Drive, 8” 3-Jaw Chuck, Splash Guards, Steady Rest,
Follow Rest, Face Plate, 220V/60Hz/3Ph, NEW Stk.
#71236 . . . . . . . . . . . . .Reg. $19,800 / Spec. $15,000
16" x 40" DALIAN, NEW, Taper, Chucks, Complete
Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,950
14" x 30" SOUTH BEND #14-40 E.V.S., Chuck, Taper,
1800 RPM, 1976 . . . . . . . . . . . . . . . . . . . . . . . . .$3,450
LATHE, ENGINE: 12-1/2" x 20" MONARCH #10EE,
Toolroom, “/mm Threads, Chucks, Face Plate, Steady
Rest, 1980, $12,500
13” X 40” SHARP Model 1340VS w/Hi/Lo Headstock
Gears and Infinitely Variable Inverter Spindle
Drive, 4-Way Tool Post, Steady Rest, Key
Lock Storage Compartment, Splash Guards, Front
Removal Chip Tray, Apron & Headstock Feed
40-2000 RPM, NEW Stk. #71248
Reversal,
. . . . . . . . . . . . . . . . . . . . .Reg. $10,118 / Spec. $8,313
13" x 40" ACRATURN #CO632, Chucks, Tooling,
2000 RPM, 2 HP, 1995 . . . . . . . . . . . . . . . . . . . .$2,250
13" x 40" JET #GH-1340W-3, 1800 RPM, Chuck,
3 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,450
13" x 40" JET, #GH-1340 W-3, Geared, D.R.O., Chuck,
1800 RPM, 3 HP . . . . . . . . . . . . . . . . . . . . . . . . .$3,990
13" x 40" LAGUN Turnmaster, Collet Chuck, D.R.O.,
1,800 RPM, 5 HP . . . . . . . . . . . . . . . . . . . . . . . .$3,750
13" x 36" CLAUSING COLCHESTER, 3 & 4 Jaw
Chucks, 1800 RPM, 3 HP, 1967 . . . . . . . . . . . .$3,250
13” x 30” CC DEAN, SMITH & GRACE #13-1, Inch/ Metric,
1600 RPM, 1-5/8” Bore, Chk., S.R., 1969 . . . . . . .$4,950
13" x 25" CLAUSING COLCHESTER Master #VS3250,
Chuck, Taper, Tooling, 3250 RPM, 10 HP, 1990 . .$8,950
12-1/2" x 20" MONARCH #10EE, Taper, Chucks,
2500 RPM, 3 HP, 1943 . . . . . . . . . . . . . . . . . . .$2,950
12-1/2" x 20" MONARCH #10EE Toolmakers,
Inch/Metric, 4000 RPM, 3 & 4 Jaw Cks, Coll. Ck., 5
HP, 1980 . . . . . . . . . . . . . . . . . . . . . . .
$12,500
11" x 30" HARRISON #M250, Chuck, 2,000 RPM,
Tooling, 1-1/2 HP, 2002 . . . . . . . . . . . . . . . . . . $7,950
11" x 18" FEELER #FTL-618EM, Series II, Vari-Speed to
2950 RPM, Inch/Metric Threading, 1 HP, 1985 . .$9,950
11” x 18” HARDINGE, #HLV-H, 3000 RPM, 1.5 HP,
Metric, 1964 . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,950
11” x 18” HARDINGE, #HLV, 3000 RPM, 1.5 HP,
1956 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,950
9" x 18" HARDINGE #DV59, Cr. Slide & Tailstock,
3500 RPM, Collet Closer, 1990 . . . . . . . . . . .$4,250
TURRET LATHES
#5-4-1/2" WARNER & SWASEY Sq. Hd. Ram Type, 3
Jaw Chuck, Hydr. Bar Feed, 4-1/2" Sp. Bore,
Tooling, 15 HP, 1965 . . . . . . . . . . . . . . . . . . . .$7,950
#3A WARNER & SWASEY, Sq. Head, #M3500, Saddle
Type, 6-1/4" Sp. Bore, Cr. Sliding Turret, 21" 3 Jaw
Chuck, 851 RPM, Tracer Attachment, 50/25 HP,
1975 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$36,500
#2A WARNER & SWASEY Sq. Hd., Saddle Type, 18"
3 Jaw Pwr. Chuck w/pwr. Wrench, Tooling, 1117
RPM, 40/20 HP, 1966 . . . . . . . . . . . . . . . . . . .$14,750
HARDINGE #HCT Chucker, Threading Attach., 6 Pos.
Turret, 3000 RPM, Tooling, 1968 . . . . . . . . . . .$2,950
HARDINGE #DV59 Second Operation, 6 Pos. Turret,
Lever Cr. Slide, Tooling, 1969 . . . . . . . . . . . . .$4,250
KBC #CTS27 Second Operation, 6 Pos. Turret, Lever
Cr. Slide, Vert. Cutoff Slide, Vari-Sp. To 3500 RPM, 2
HP, 1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,750
HORIZONTAL MILLS
LATHE, TURRET: 3A WARNER & SWASEY Saddle
Type, 6-1/4" Hole, Cross Sliding Turret, Tracer
Attach., 21" 3 Jaw Chuck, 50 HP, 1975, $36,500
#430-18 CINCINNATI Vercipower With 7.5 HP Vert. Hd.,
18” x 80” Tbl., 42” Long., 1600 RPM, 1963 . . . .$5,950
#FA-4-AH TOS, 13" x 63" Table, 39" Feed, #50 Taper,
10 HP, Coolant, 1974 . . . . . . . . . . . . . . . . . . . .$2,950
LATHE, ENGINE: 25" x 80" TOOLMEX Wafum TUR63A,
14-1/2" OCS, 5-1/2" Bore, Taper Att., Front & Rear
Mounted Chucks, 1979, $24,500
#FU10 SOUTH BEND Combination Horiz./Vert., 19" x
61" Tbl., 49" Long., Vert. Overarm, 10 HP Drives,
1982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,950
#MH-3P OKK, 14" x 65" Tbl., 36" Long., 1600 RPM,
Tooling, 10 HP, 1976 . . . . . . . . . . . . . . .
$8,950
#3H KEARNEY & TRECKER, 13" X 64" Tbl.,
34" Long., 1000 RPM, Vert. Attachment, 7-1/2 HP,
1943 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,950
#2 QIQIHAR, 12-1/2" x 52" Tbl., 31"X, 1,500 RPM, #50
Tpr., P.R.T., 10 HP, 1990's, Never Used . . . . .$7,950
#2CHL KEARNEY & TRECKER, 10" X 46" Tbl., 28"
Long., 1500 RPM, 3 HP, 1952 . . . . . . . . . . . . .$3,250
#YCM-2H SUPERMAX, 11" X 51" Tbl., 39" Long.,
1300 RPM, Pendant, 5 HP, 1991 . . . . . . . . . . . .$8,950
#13 SCHAUBLIN Univ., 8" x 23" Tbl., Tooling, 2 HP,
1978 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,250
PRODUCTION MILLS
#C2 SUNDSTRAND Rigidmill, 15" x 78" Tbl., 48"
Long., Auto. Cycle, Quill Retract, 1142 RPM, 15 HP,
1972 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,950
#100-RF CINCINNATI, Auto. Cycle, 12" x 54" Tbl., 24"
Long., Rise & Fall, 1200 RPM, 5 HP, 1978 . . .$6,950
#12SA NICHOLS, 9” x 36” Tbl., Servo Ball Screw
Tbl. Feed, 2875 RPM, 2 HP, 1975 . . . . . . . . . .$4,950
#2 U. S. BURKE, 8" x 32" Tbl., 20"X, 2370 RPM, Pwr.
Tbl., 2 HP, 1973 . . . . . . . . . . . . . . . . . . . . . . . .$2,450
MOST MACHINES SOLD WITH 30-DAY RETURN PRIVILEGE.
LATHE, ENGINE: 26"/35" x 120" DALIAN Gap
Bed, CDS-26120C, DRO, Chucks, Steady Rest,
Taper Attach., NEW, $27,500
VERTICAL MILLS
#6 CINCINNATI, 20" x105" Table, 60" Long.,
1400 RPM, 50 HP, 1951 . . . . . . . . . . . . . . . . . .$3,950
#420-20 CINCINNATI, 20" x 86" Tbl., 42" Long., Pwr.
Draw Bar, 1600 RPM, 30 HP, 1973 . . . . . . . .$18,500
3M HITACHI, 14” x 63” Table, 33” Long., 1500 RPM,
15 HP, PDB, 2 Axis D.R.O. . . . . . . . . . . . . . . . .$3,950
#2 QIQIHAR, 12-1/2" x 52" Tbl., 31"X, 1,500 RPM, #50
Tpr., P.R.T., 10 HP, 1990's, Never Used . . . . . .$7,950
#2D KEARNEY & TRECKER Rotary Hd., 16" x 30"
Tbl., 18" Long., 4000 RPM, 1954 . . . . . . . . . . .$1,950
ACER #3VK, 10" x 50" Tbl., 36" Long., D.R.O., Pwr.
Tbl. Feed, Pwr. Draw Bar, 3 HP, 1991 . . . . . . .$5,950
BRIDGEPORT Series II Special, 11" x 58" Tbl., 30"
Long., Pwr. Long., 4200 RPM, 2 HP, 1977 . . .$5,950
BRIDGEPORT Series II, 11" x 58" Tbl., 30" Long., #40
Tpr., 3500 RPM, 4 HP, 1974 . . . . . . . . . . . . . . .$7,950
BRIDGEPORT Series 1, 2 HP, 9" x 48" Tbl., Pwr. Tbl.
Feed, D.R.O., 1995 . . . . . . . . . . . . . . . . . . . . . .$7,950
MILL, HORIZONTAL:
#MH-3P OKK, 14" x
65" Tbl., 36" Long.,
1600 RPM, Tooling,
10 HP, 1976, $8,950
__________________________________________________________________________________________________________________________
11
CALL US WITH ALL YOUR MACHINERY NEEDS OR AVAILABLE SURPLUS.
PRESS,
STRAIGHT
SIDE D.C.:
60 Ton NIAGARA
#PN60-72-36, 3"
Str., 16" S.H.,
72" x 36" Bed &
Ram, 40 SPM,
A.C., 1974,
$12,500
VERTICAL MILLS, cont.
BRIDGEPORT Series I, 9" x 48" Tbl., Pwr. Long. &
Cross, 4200 RPM, 2 HP, 1994 . . . . . . . . . . . . .$6,250
BRIDGEPORT Series I, 9" x 48" Tbl., 4200 RPM, 2 HP,
1987 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5,950
BRIDGEPORT Series I, 2 HP, 9" x 42" Tbl., Pwr. Tbl.
Feed, D.R.O., 1983 . . . . . . . . . . . . . . . . . . . . . .$6,250
BRIDGEPORT SERIES 1, 9" x 42" Tbl., 30" Long.,
D.R.O., Pwr. Tbl. Feed, 2 HP, 1983 (5) . . . . . .$P.O.R.
BRIDGEPORT SERIES II, 4 HP, 11’ x 58” Table,
30” Long., 3500 RPM, #40 Taper, 3 Axis Power Rapid
Traverse & Feed, 2 Axis D.R.O., 1971-1977 (2)P.O.R.
BRIDGEPORT 3 Dimensional Hydr. Tracer Mill,
Series I, Tru Trace, 2 HP Head . . . . . . . . . . . .$3,750
BRIDGEPORT 1-1/2 HP, 9" x 42" Tbl., D.R.O., Pwr.
Tbl. Feed, (3), 1976-1968 . . . . . . . . . . . . . . . .$P.O.R.
ENCO, 9" x 49" Tbl., 4200 RPM, D.R.O., Pwr. Tbl.
Feed, 2 HP, 1996 . . . . . . . . . . . . . . . . . . . . . . . .$2,250
KENT #KTM-4VK, 10" x 50" Tbl., 36" Long., D.R.O.,
4200 RPM, 3 HP, 1992 . . . . . . . . . . . . . . . . . . . .$3,250
LAGUN #FTV-2, 9" x 48" Tbl., 4250 RPM, 3 HP,
1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,950
LAGUN #FT-2, 9" x 48" Tbl., Pwr. Long. Feed, 2 HP,
1976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,950
SHARP LMV 3 HP, 9” x 42” Table, Chrome Ways,
One-Shot Lube, DVS Spindle Drive, R8 Taper, NEW
Stk #71308 & 71309 Reg. $8,807 / Special $7,750 Ea.
SHARP LMV50 3 HP, 9” x 50” Table, Chrome Ways,
One-Shot Lube, Vari-Speed Spindle, R8 Taper, NEW
Stk #71273 . . . . . . . . . .Reg. $7,835 / Special $6,618
SHARP LMV50 3 HP, 9” x 50” Table, Chrome Ways,
One-Shot Lube, Vari-Speed Spindle, R8 Taper, NEW
Stk #71310 . . . . . . . . . .Reg. $8,075 / Special $7,078
SHARP LMV50 3 HP, 9” x 50” Table, Acu-Rite
200S DRO, Chrome Ways, One-Shot Lube, DVS
Spindle Drive, R8 Taper, NEW Stk #71311
. . . . . . . . . . . . . . . . . .Reg. $11,447 / Special $10,296
SHARP LMV50 3 HP, 9°± x 50°± table, chrome ways,
one-shot lube, DVS spindle drive, R8 taper, NEW Stk
#71312 & 71313 . . .Reg. $9,137 / Special $8,042Ea.
SHARP #VH3 Horiz./Vert. Combination Mill, 11" x 51"
Tbl., #40 Tpr. Vert., #50 Tpr. Horiz., Pwr. Feeds, 7-1/2
HP Horiz., 5 HP Vert., D.R.O., 1997 . . . . . . . .$19,500
SUPERMAX #YCM-16VS, 9" x 49" Tbl., Pwr. Long.
Feed, Vari-Speed To 4200 RPM, 3 HP, 1995, . $4,950
TREE #2VGC, 10" x 48" Tbl., Pwr. Tbl. Feeds, 2500
RPM, D.R.O., 3 HP . . . . . . . . . . . . . . . . . . . . . .$3,250
#2VGC TREE, 10" x 48" Tbl., Pwr. Long. & Cr., 2500
RPM, D.R.O., 3 HP, 1965 . . . . . . . . . . . . . . . . . .$3,450
Cherrying Head: BRIDGEPORT, 1/2 HP, 4250 RPM .$595
Vertical Head, ELGA, Swivel Head, #50 Taper, Bolton Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,950
Vertical Heads, for KEARNEY & TRECKER and
NICHOLS Mills . . . . . . . . . . . . . . . . . . . . . . . . . .P.O.R.
PRESSES, O.B.I.
12
125 Ton SOUTH BEND JOHNSON #125BG-AC, 4”
Stk., 17.5” S.H., 40 SPM, 42” x 27” Bed, Air Clutch &
Counterbalance, 15 HP, 1975 . . . . . . .
$22,500
PRESS,
HYDRAULIC:
150 Ton PACIFIC
Pressformer II
C-Frame, 18" Str.,
28" Open Height,
18" Throat,
38" x 32" Bed,
Die Cushion, 1978,
$42,500
88 Ton NIAGARA "Bison BN8", Gap Frame, 6" Stk.,
19" S.H., 36" x 24" Bed, 40-75 SPM, Air Cl., 7-1/2 HP,
1992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24,500
88 Ton SEYI Open Back Gap Frame, #SN1, 3.9" Stk., 50100 SPM, 11.8" S.H., 41" x 23" Bed, 10 HP, Air Cl. &
Counterbalance, 2002 . . . . . . . . . . . . . . . . . . . . $34,500
88 Ton SEYI Open Back Gap Frame, #SN1, 2.36" Stk.,
65-140 SPM, 11.8" S.H., 41" x 23" Bed, 10 HP, Air Cl.
& Counterbalance, 2002 . . . . . . . . . . . . . . . .$34,500
80 Ton FEDERAL #7, B.G., 4" Stk., 13-1/2" S.H., 36" x 28"
Bed, Air Cl. & Cush., 45 SPM, 7-1/2 HP, 1968 . . .$15,900
80 Ton FEDERAL #7, 4" Stk., 13-1/2" S.H., 36" x 28" Bed,
75 SPM, Air Cl., 7-1/2 HP, 1976 . . . . . . . . . . . . . . .$13,750
80 Ton L & J #80, B.G., 6" Stk., 19" S.H., 15-70 SPM,
36" x 26" Bed, Air Cl., 7-1/2 HP, 1966 . . . . . .$16,500
75 Ton BRUDERER #BSTA60, 4 Post, Underdriven,
Hi-Speed Press, 3/4" - 3" Stk., 30" x 24" Bed, 100-800
SPM, BBV300/200 Roll Feed, 25 HP, 1970 . .$39,500
75 Ton WARCO #75, B.G., 5" Stk., 20-3/4" S.H., 23" x
32" Bed, 45 SPM, Air Cl., 1947 . . . . . . . . . . . .$7,950
65 Ton NIAGARA #BN-60-OBS, Open Back Gap
Frame, 5" Stk., 17" S.H., 45-85 SPM, 32" x 21" Bed,
Air Cl., 7-1/2 HP, 1993 . . . . . . . . . . . . .
$19,500
60 Ton BLISS #C60, Back Geared, 4" Stk., 14-1/4"
S.H., 45 SPM, 32" x 21" Bed, Air Cl. & Br., 7-1/2 HP,
1977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16,500
60 Ton BLISS, Flywheel, 4” Stk., 14” S.H., 100 SPM,
32” x 21” Bed, Air Cl. & Br., 5 HP, 1970 . . . .$14,500
60 Ton FEDERAL #60, Back Geared, 2" Stk., 14" S.H.,
60-180 SPM, Slide Feed, 7-1/2 HP, 1979 . . . .$12,500
60 Ton L & J #6, Back Geared, 4" Stk., 13-1/4" S.H.,
46 SPM, 30" x 18" Bed, Air Cl., 5 HP, 1978 .$13,500
60 Ton SOUTH BEND JOHNSON #60-FW-AC,
Flywheel, 4" Stk., 12-1/2" S.H., 100 SPM, 32" x 21"
Bed, Air Cl., 1973 . . . . . . . . . . . . . . . . . . . . . . .$8,950
60 Ton ROUSSELLE #6F Deep Throat, 3” Stk.,
21” Throat, 110 SPM, 18” x 30” Bed, Air Clutch,
1970 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,900
55 Ton WALSH #55, Flywheel Type, 4" Stk., 10" S.H.,
55-150 SPM, Air Cl., 5 HP, 1965 . . . . . . . . . . . .$7,950
45 Ton BLISS #C45, Flywheel, 3" Stk., 12-1/4" S.H.,
110 SPM, 29" x 18" Bed, Air Cl., 5 HP, 1967 .$12,750
45 Ton BLISS #C45, Flywheel, 3" Stk., 12-1/4" S.H.,
Vari. to 110 SPM, Air Cl., 5 HP, 1978 . . . . . . .$14,900
45 Ton JOHNSON #45, F.W., 2" Stk., 11-1/2" S.H., 125
SPM, 28" x 18" Bed, Air Cl., 1961 . . . . . . . . . .$6,950
45 Ton L & J #45, Flywheel, 2" Stk., 11-1/2" S.H.,
Variable to 220 SPM, 28" x 18" Bed, Air Cl., 5 HP,
1973 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,950
45 Ton MINSTER #5, Flywheel, 4" Stk., 13" S.H., 28"
x 18" Bed, Air Cl., 5 HP, 1971 . . . . . . . . . . . . . .$9,750
45 Ton NIAGARA #A45, Flywheel, 4" Stk.,
17-3/4" S.H., 100 SPM, 28" x 18" Bed, Air Cl., 5 HP,
1970 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,950
38 Ton WALSH #38X, Flywheel, 2-1/2" Stk., 12-1/2"
S.H., 90-270 SPM, Slide Feed, Air Cl., 1972 . .$7,950
38 Ton WALSH #38, Flywheel, 4” Stk., 10” S.H., 26” x
14” Bed, Vari-Speed, 1965 . . . . . . . . . . . . . . . .$3,450
38 Ton WALSH #38X, F.W., 4” Stk., 11” S.H., 70-210
SPM, 32” x 18” Bed, Air Cl., 3 HP Vari-Speed Drive,
1972 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,750
PRESS, GAP:
65 Ton NIAGARA
#BN-60-OBS,
5” Str., 17” S.H.,
45 to 85 SPM,
A.C. & Brake,
1993
$19,500
27 Ton L & J #27, F.W., 2-1/2” Stk., 9” S.H.,
21-1/2” x 13” Bed, 75-200 SPM, Air Cl., 4” Roll Feed,
3 HP V.S. Drive, 1982 . . . . . . . . . . . . . . . . . . . .$7.950
22 Ton FEDERAL #22, Flywheel, 2-1/2" Stk.,
8-1/2" S.H., 150 SPM, 20" x 12" Bed, Air Cl., 2 HP,
1980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,950
22 Ton BLISS #C22, Flywheel, 2-1/2" Stk., 9-1/4" S.H.,
150 SPM, 23" x 13" Bed, Air Cl., 2 HP, 1980 .$9,950
PRESSES - SS AND MISC.
550 Ton SEYI Str. Side Dbl. Cr., #HSD550, 12" Stk., 30"
S.H., 145" x 61" Bed, 25-50 SPM, Coe Servo Feed
Line, 75 HP, 1997 . . . . . . . . . . . . . . . . . . . . . . . .$P.O.R.
440 Ton SEYI Str. Side Dbl. Cr., #HSD440, 10" Stk., 30"
S.H., 122" x 55" Bed, 25-50 SPM, Coe Servo Feed
Line, 75 HP, 1995 . . . . . . . . . . . . . . . . . . . . . . . .$P.O.R.
220 Ton KOMATSU #OBS200-3, Gap Frame, 9.84"
Stk., 18.9" S.H., 57" x 35" Bed, 25-50 SPM, Air Cl. &
Cush., 1987, (2) . . . . . . . . . . . . . . . . . . . . . . . . .$79,500
200 Ton MECFOND #SC200-6042, Str. Side Dbl. Cr.,
14" Stk., 16" S.H., 30 SPM, 60" x 30" Bed, Air Cl., 25
HP, 1966 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,500
150 Ton PACIFIC Pressformer II Hydr. C Frame, 18"
Stk., 16" S.H., 38" x 32" Bed, Die Cushion, Hi Speed
Power Unit, 30 HP, 1978 . . . . . . . . . . . .
$42,500
150 Ton VERSON #150-B2-60 Str. Side Dbl. Cr., 10"
Stk., 21" S.H., 35 to 70 SPM, 36" x 60" Bed, Air Cl., 18"
Littell Feed, 1984, (2) . . . . . . . . . .
EA. $34,500
100 Ton FEDERAL #S2-100-72-42, Str. Side Dbl. Cr.,
8" Stk., 22" S.H., 72" x 42" Bed, 24 SPM, Air Cl., 18"
Feed & Straightener, 30 HP, 1967 . . . . . . . . .$29,500
86 Ton METAL MUNCHER #GB90, Hydr., 11" x 48"
Tbl., 9" Stk., 16" x 12" Ram, 7-1/2 HP, 1988 . .$8,950
75 Ton L & J Str. Side Dbl. Cr., #EM2-75-36-24, 4"
Stk., 36" x 24" Bed, 17" S.H., 15-90 SPM, Air Cl., 12"
Feed & Straightener, 10 HP, 1976 . . . . . . . . .$27,500
60 Ton BLISS #HP2-60-30-24 S.S., D.C., 3” Stk.,
14” S.H., 30-24” Bed, 120 SPM, 10” Roll Feed, Air Cl.,
1966 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,900
60 Ton NIAGARA #PN60-72-36, S.S., D.C., 3" Stk., 16"
S.H., 72" x 36" Bed, 40 SPM, Windows, Air Cl.,
1974 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$12,500
50 Ton WABASH #PC50-18-2-TN, Hydr., Heated
Platens, 18" x 18" Bed, 7" Stk., 7" Daylight, 3 HP,
Upstroke Ram, 200-600° F, 1973 . . . . . . . . . . .$2,950
40 Ton HAPCO, 4 Post, Hydr., 21” Stk., 39” x 19”
Between Posts, 27” D.L., 7-1/2 HP, 1982 . . . .$3,750
29 Ton BECKWOOD Hydr. Press, #4P29F3636AB, 4
Post, Down Acting, 36" x 36" Bed & Ram, 20" Stk., 049" S.H., Bed Adj. 8" to 56", 2004 . . . . . . . .$19,500
PRESS, STRAIGHT SIDE: 150 TON VERSON #150-B260 DOUBLE CRANK, 10" Stk., 21" S.H., 36" X 60" Bed,
35 to 70 SPM, Air Cl., Feeder, 1984, $34,500
__________________________________________________________________________________________________________________________
22 Ton BLISS #C22 Flywheel Gap Frame, 2-1/2" Stk.,
9-1/4" S.H., 150 SPM, 23-1/2" x 13-3/4" Bed., Air Cl.,
1998 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$17,500
20 Ton CHARLES STRECHER Screw Press, 7-1/4"
Stk., 18" x 20" Bolster . . . . . . . . . . . . . . . . . . .$1,950
6 Ton DAKE ARBOR PRESS #2, Bench Type, 20" x 8"
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$550
Ton
PEMSERTER
Air/Hydraulic
Press,
5
13" Throat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,450
Presstaker: CONRAC Air Op., Bench, 6” x 8” Base .$675
PRESS ACCESSORIES
COIL FEED LINE: 6,600 Lb. SSANGYONG (Korea)
Servo Feed Line, 11.8" x .102" Cap., Uncoiler, Leveller
Feeder, Coil Car, 1999, Like New . . . . .
$16,500
COIL CRADLE: 2000 lb. LITTELL #CC20-20,
45" Max. O.D., 20" Max. Width, 1969 . . . . . . . .$1,150
COIL CRADLE: ROWE #810, 1200# Cap., 10” Max.
Width, 1/4 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . .$550
COIL CRADLE & STRAIGHTENER: 2,500 Lb. COOPER WEYMOUTH #6ACS, 6" Width, 42" O.D, .078"
Thick, 7 Roll Str., 1988 . . . . . . . . . . . . . . . . . .$7,950
COIL REEL: 6,000 Lb. JACO #JVRE6024-1, 3 HP, 24”
Width, 54” Max. O.D., Keepers . . . . . . . . . . . .$2,250
COIL REEL: 6,000 Lb. DURANT #MD602-M, 3 HP, 24”
Width, 54” Max. O.D., Keepers . . . . . . . . . . . .$2,250
Coil Reel:
4,000 LB. LITTELL #15-20, Auto.,
Motorized, 12" Width, 15-20" I.D., 48" O.D. . .$3,950
COIL REEL: 2,500 Lb. AMERICAN #60, Motorized, 18”
Width, 54” Max. O.D., 7-20 RPM, 1 HP, 1978 . .$2,750
COIL REEL: 2500 Lb. Coe #PR182500-NAB, 18"
Wide, 54" O.D., 1 HP . . . . . . . . . . . . . . . . . . . . .$2,450
COIL REEL & STRAIGHTENER COMBINATION:
BRUDERER #18-260B, 10" Width, .120" Thickness,
19 Str. Rolls, Pwr. Feed, 1974 . . . . . . . . . . . . .$2,500
COIL REEL & STRAIGHTENER: COE 30" Wide x
.065" Thick Straightener, 10,000 Lb. Coe Reel, Hydr.
Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,500
COIL STRAIGHTENER: PERFECTO #17-12-17,
Thickness .015-.065, Max. Width 12”, Speed Up To
4800 IPM, 17 Straightening Rolls . . . . . . . . . .$1,450
FEED, SERVO: P.A. INDUSTRIES "Advantage"
#SRF24-HD, 23.6" Width, .138" Max. Thick., .090"
Max. Thick. (Full Width), 1995 . . . . . . . . . . . .$11,750
FEEDER: 30” x 12” AIR FEED-ROLL FEED Comb.
Feed & Straightener, Model AF3, 2000 . . . . . .$5,450
FEEDER: 18” COOPER WEYMOUTH #RF1812-LH,
Max. Width 18”, Max. Stk. 12”, .009 Cap . . . .$1,950
FEEDER: 12" X 12" COE #CF200 Air Feed, 90 SPM,
Stand, 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,250
PRESS FEED LINE: 6600 Lb, SSANGYONG,
11.8" Width, .1024" Cap., Coil Car, Uncoiler, NC
Leveller/Feeder, Never Used, 1999, $16,500
PRESS, GAP
FRAME:
22 TON BLISS #C22
Flywheel, 2.5" Stk.,
9-1/4" S.H.,
13-3/4" x 23-1/2"
Bed, 150 SPM,
Air Cl. & Br.,
1998, $17,500
SAW, BAND, HORIZ.: 24" x 24" AMADA #H600, Post
Type, Semi Auto.,2" Blade, Hydr. Vise, Coolant, 10 HP,
1980 $22,500
SAWS
Cold Saw: #KA800/HM1000 OHLER, Auto. Cycle, 14" Dia.
Cap., Saw Blade Dia. 25-40", 157" Auto. Infeed Tbl., Hydr.
Vises, Chip Conv., 70 HP, 1979 . . . . . . . .
$49,500
Cold Saw, CNC Automatic: WILTON MEP "Tiger 350
CNC-FE", 4-1/16" Dia. Cap., Auto. Bar Feed,
Bundling, Miter Capability, Evolution CNC, 14"
Blade, 3.5 HP, (2000) . . . . . . . . . . . . . . . . . . . .$12,500
Cold Saw: 14" BEWO (Scotchman) #CP0350NF-PK,
Non-Ferrous, 4-7/8" Dia., 1500/3000 RPM, Miter Cap.,
3 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,250
Cold Saw: JAGER FHC-300A Auto., 35/70 RPM, 31/2” Tube, 2-3/4” Solid, 10”-12” Blade, NEW $13,850
Cut Off Saw: 14" EVERETT, Hydr. Feed, Oscillation,
Air Vise, 10 HP . . . . . . . . . . . . . . . . . . . . . . . . .$1,650
HORIZONTAL BAND
41" x 41" HYD-MECH #H40, Semi Auto., Twin
Column, 3" Dia. Blade, Hydr. Vise, Coolant, 20 HP,
$69,500
1992 . . . . . . . . . . . . .(see front cover)
31.5” x 22” VANGUARD Model H-8056 Semi-Auto.,
Dual Post Hd, 2” Bi-Metal Blade, Hydr. Lift Rollers
w/Pwr. Feed (2), Hydr. Blade Tension, Blade
Breakage Switch, 10 HP, Hydr. Vise & Head Feed, 40”
Stock Table, Coolant, NEW, Stk #80094 . . . . $32,400
25" x 16" AMADA #H650HD, Hvy. Duty, Semi-Auto.,
Swivel Base, 16" Round Cap., 1-1/2" Blade, 5 HP,
1978 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,000
24" x 27" DAITO #GA600B, Twin Post, Auto. Cycle, 2"
Dia. Blade, Bundling, Entry/Exit Roller Tbls., 10 HP,
1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500
24" x 24" AMADA #H600, Post Type, Semi Auto.,
2" Blade, Hydr. Vise, Coolant, 10 HP, 1980
................................
$22,500
16" X 16" AMADA #HA-16S, Auto. Cycle, 1-1/4"
Blade, Hydr. Vise, Coolant, Multi Cycle, 7-1/2 HP,
1986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16,500
16" x 15" KYSOR JOHNSON #KJ-16A, Auto. Cycle,
Hydr., 1-1/4" Blade, (2) Bundle Vises, Chip Auger, 5
HP, 1978 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,500
16" x 14" DOALL #C410A, Auto. Cycle, 16" Dia. Cap.,
1-1/2" Blade, Bundling Attach., Coolant, 7-1/2 HP,
1992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12,500
13” x 18” HYD-MECH Model S20A Fully Automatic Band
Saw, 30° Swivel Head Miter Cutting, Multiple Index
Shuttle Table, Inverter Drive Variable Blade Speed,
Carbide Guides, 1” Blade, Variable Vise Pressure, Out
of Stock Switch, Blade Breakage/Stall Switch, NEW Stk.
#71211 . . . . . . . . . . . . . . . . .Reg. $22,835 / Spec $18,815
13" x 13" ARMSTRONG BLUM "Marvel" #13A/M11,
Auto. Cycle, 1" Blade, 2 Hydr. Vises, 5' Auto. Feed
Tbl., 3 HP, 1981 . . . . . . . . . . . . . . . . . . . . . . . .$10,500
13” x 10” VANGUARD Model S-12H Semi-Auto., 12”
Rnd., 16” x 6” Rect., 1” M-42 Bi-Metal Blade, Hydr.
Vise & Head Feed, 40” Roller Stock Table, Coolant,
NEW, Stk #80090 . . . . . . . . . . . . . . . . . . . . . . . .$7,250
12" x 12" HYD-MECH #H12A, Post Type, Auto. Cycle,
1-1/4" Blade Dia., PLC100 Control, Coolant, 5 HP,
1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500
12” x 12” DOALL #C-9AV, Fully Auto., 1” Blade, 3 HP,
6’ Infeed Table w/Air Vise, 1974 . . . . . . . . . . . .$5,950
12" x 12" DAKE Metora #MB300, Miter Capacity, 1"
Blade, Roller Tbl., 1-1/2 HP . . . . . . . . . . . . . . $4,950
10" x 15" BEHRINGER #HBP260/403G, Semi-Auto.,
Miter Cutting, Twin Post, 1-1/4" Blade Dia., 4 HP,
1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12,500
10” x 10” HYD-MECH Model H10A Fully Automatic
Band Saw, Dual Post, Full Cap. Overhead Bundling,
Variable Vise Pressure, Mitsubishi PLC, 5 HP Inverter
Blade Drive, Direct Drive Trans./Motor, Coolant NEW
Stk. #71150 . . . . . . . . . . .Reg. $32,500 / Spec. $28,570
9-1/2" x 16-1/2" FMB "Galactic". Semi-Auto., Miter
Cutting, 1" Dia. Blade, Hydr. Vise, 1-1/2 HP, 1999 .$5,950
9" x 18" W. F. WELLS #W9, Twin Post, 1-1/4 HP,
1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,450
9" x 18" W. F. WELLS #W9, Twin Post, 1 HP, 1974 $1,450
Horiz./Vert. Band: 4” x 6” JET #HUBS-463, 1/2 HP .$490
VERTICAL BAND
60" DO ALL #V60, 1500 RPM, Power Feed, GrinderWelder, 1951 . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,950
40” RUTLAND #2668-2835, 19” x 23” Tbl.,
Welder/Grinder . . . . . . . . . . . . . . . . . . . . . . . . .$2,450
36" DOALL #3613-20, 28" X 28" Tbl., Hydr. Tbl. Feed,
1979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,750
36" DOALL #3612-3, 24" X 31" Tbl., Pwr. Tbl. Feed,
Welder, 1963 . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,950
36" KALAMAZOO Startrite #316H, 26" x 26" Tbl.,
Hydr. Table Travel, 3 HP, 1977 . . . . . . . . . . . . .$3,950
36” TANNEWITZ, #3600MH, 32” x 41” Tbl., 13” Vert.
Cap., 45-9000 FPM, Welder, 7-1/2 HP, 1966 . .$3,450
30” TANNEWITZ, #300MH, 13” Vert. Cap., Hydr. Feed,
10 HP, 1965 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,250
24" DAKE JOHNSON #VH24, Hydr. Tbl. Feed, 26" x
26" Tbl., Welder/Grinder, 2.2 HP, 1985 . . . . . .$5,250
18" x 24" MARVEL High Column, Tilt Frame, Vise, 1-1/3
HP, 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6,950
18” x 20” MARVEL #81A9/M4A, Auto. Infeed, Tilt
Frame, Hydr. Vises, 1-1/4” Blade, Multi Cycle,
Coolant, 10 HP, 1982 . . . . . . . . . . . . . . . . . . . . .$9,950
18" x 20" MARVEL #8, Mark I, Tilt Frame, 1" Blade,
Coolant, 2 HP, 1980 . . . . . . . . . . . . . . . .
$8,950
18" x 18" MARVEL #8/M8/E, Tilt Frame, 20-200 FPM,
1-33 HP, 1977 . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,950
18" GROB #4V-18, 12" Vert., Hydr. Tbl. Feed, Welder,
1 HP, 1979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,450
18" GROB #NS18, 10" x 18" Tbl., Welder/Grinder,
1 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,250
18" x 18" MARVEL #8, Tilt Frame, Vise, 2 HP, $2,450
16" DAKE JOHNSON #V16, 23" x 23" Tbl., Welder, 1
HP, 1989 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,950
16" DOALL #1612-0, 24" X 24" Tbl., Welder/Grinder,
1964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,250
10" x 14" ARMSTRONG BLUM "Marvel" #V-10A2PC, Tilt Frame, Auto. Cycle, PC Control, 1" Blade,
45 Degree Tilt, (2) Bundling Clamps, Coolant, 3 HP,
1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,500
10" x 10" MARVEL #V10-A, Tilt Frame, Auto.
Cycle, 1" Blade Dia., 2 Hydr. Vises, Coolant, 3 HP,
1986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,950
8-3/4" ROLL IN, 18" x 30" Tbl., 1 HP . . . . . . . .$1,750
AMEA CERTIFIED APPRAISERS ON STAFF.
PRESS, O.B.I.:
125 Ton SOUTH
BEND JOHNSON
#125BG-AC,
Back Geared,
4” Stk.,
17-1/2” S.H.,
42” x 27” Bed,
Air Cl., 15 HP,
1975 $22,500
SAW, VERTICAL
BAND:
18" x 20"
MARVEL #8 Mark I,
1" Blade,
2 HP Motor, 1980,
$8,950
__________________________________________________________________________________________________________________________
13
NO BUYERS PREMIUM • LOADING INCLUDED.
14
OPTICAL
COMPARATOR:
14" OGP #QL-14C, 10
& 20X Lens, Di-Metric
Plus D.R.O., Surf.
Illum., 1988, $8,950
COLD SAW: #KA800HM/1000 OHLER Circular Cold
Saw, 25" to 40" Saw Blade, 14" Round Cutting Cap.,
Infeed Roller Conveyor, 1979, 70 HP, $49,500
MISCELLANEOUS
BROACH, HORIZONTAL 20 Ton x 60" Stroke TY
MILES, Mo# MH-20-60, Tooling, 1992 . . . .$14,900
COMPARATOR: 14” JONES & LAMSON, #TC14, 20X
Lens, 5” x 15” Tbl., Floor Stand . . . . . . . . . . .$1,950
COMPARATOR: 14” JONES & LAMSON #TC14, 10X
& 50X Lens, 5” x 16” Tbl., Floor Stand . . . . . .$1,950
COMPARATOR: 14” JONES & LAMSON #PC14A,
20X Lens, 6” x 30” Tbl., Surf. Illum . . . . . . . . .$2,450
COMPARATOR: 14" JONES & LAMSON #PC-14,
Lens, Footstocks, 10x & 20x Lens, 1956 . . . . .$950
COMPARATOR: 14" JONES & LAMSON, #TC14,
7" x 15" Table, 10x & 20x Lens . . . . . . . . . . . .$1,200
COMPARATOR: 14" MICRO-VU #H14, MD-1 D.R.O.,
Surf. & Profile Illum., 5" x 18" Tbl. . . . . . . . . .$2,250
COMPARATOR: 14" MITUTOYO #PH361A, Bench Type,
10 & 20X Lens, 6" x 27" Tbl., D.R.O., Surf. Illum.$2,450
COMPARATOR: 14" OGP #QL-14C, 10 & 20X Lens, DiMetric Plus D.R.O., Surf. Illum., 1988 . .
$8,950
COMPARATOR: 10" MITUTOYO #PJ250, Vert. Beam,
10X Lens, Reflective Attch., 1969 . . . . . . . . . .$1,000
COORDINATE MEASURING MACHINE: #B231-10/10
MITUTOYO, Renishaw Probe, 28"X, 29"Y, 19"Z,
Geopak Software . . . . . . . . . . . . . . . . . . . . . .$16,500
COORDINATE MEASURING MACHINE: #B706 MITUTOYO CNC, #PH1/TP2 Renishaw Probe, 28"X, 24"Y,
16"Z, Geopak Software, 1990 . . . . . . . . . . . .$17,500
DEBURRING MACHINE, EDGE: #111 FALLS, 24 Ga.
To 1/4" Cap., 60 FPM . . . . . . . . . . . . . . . . . . . .$2,950
DIE FILER: ALL AMERICAN, 10" x 10" Tbl., 1/4 HP $150
Dust Collector: 5 HP DUST HOG, Supra-Crossflow
Cartridge Type, Filter Area 2271 Sq. Ft., (2) . . .Ea. $2,750
DUST COLLECTOR: #60 TORIT, 3/4 HP . . . . . . . . . .$850
DUST COLLECTOR: #200 ARRESTALL, 1/2 HP $550
EMBOSSING & CUT-OFF MACHINE: AUTOMARK
#ST-880, Material Width 1/2”, Max. Thickness .012”,
Character Ht. 3/16”, 1991 . . . . . . . . . . . . . . . . . .$950
FORK LIFT PALLET TRUCK: 2000 Lb. ROL LIFT
Hand-Elec.-Hydr., Max. Lift Height 84” . . . . . . .$650
FURNACE: HUPPERT Tempering Furnace, #ST,
130-550 Deg., 15” x 17” x 16” Chamber . . . . . .$950
GEAR HOBBER: MIKRON #APA22/0, 25/32" Dia. &
Length, Loaded W/Tooling . . . . . . . . . . . . . . . .$3,950
GEAR SHAPER: #4AGS FELLOWS, 98-635 SPM,
Extra Gears, 3 HP, 1965 . . . . . . . . . . . . . . . . . .$7,750
GRANULATOR: CONAIR WORTEX #JC-5L, 17” x 13”
Top Opening, 7-1/2 HP . . . . . . . . . . . . . . . . . . .$1,450
GRANULATOR: WORTEX #JC5, 8” x 10” Opening,
5 HP, 1982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$850
GRANULATOR: POLYMER #1120 SPL, 2 Knife, 20
HP, (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EA. $3,500
HARDNESS TESTER: #3 J R WILSON ROCKWELL,
B & C Scales, Tooling . . . . . . . . . . . . . . . . . . . .$1,150
HARDNESS TESTER: Phase II, ROCKWELL B & C
Scales, Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . .$990
HONE, HORIZONTAL: #CGM 5000 SUNNEN KROSS
Grind Machine, Max. I.D. 1.26", Max. Length 6", Auto
Cycle, 1998, (2) . . . . . . . . . . . . . . . . . . . . .Ea. $18,500
HONE, HORIZ.: #MBB1800, SUNNEN, Pwr. Stroking,
.125" to 3.750" I.D. Cap., 1 HP, 1974 . . . . . . . .$4,950
HONE, HORIZ.: #MBB1650 SUNNEN, Pwr. Stroking,
.125" to 3.75" I.D. Cap., 1/2 HP, 1969 . . . . . . .$4,250
HONE, HORIZ.: #MBC 1802 SUNNEN, Pwr. Stroking,
.060" to 3.75" I.D. Cap., 2500 RPM, 1 HP, 1976 $4,450
HONE, HORIZ.: #MBB1680C SUNNEN, .060" to 4.95"
Cap., Pwr. Stroking, 1600 RPM, 1/2 HP, 1971 .$2,950
HYDRAULIC PUMP & TANK, 36" x 32" x 21" Tank,
25 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,450
INDEXER, ROTARY, CNC: 11" YUASA #PNC-500
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,950
INJECTION MOLDING MACHINE: 2-1/2 Oz. VAN
DORN, #H260, 9" x 10" Platen, 30 Ton, 9" Between
Bars, 7-1/2 HP . . . . . . . . . . . . . . . . . . . . . . . . . .$1,750
JIG BORER: 6A SIP Hydroptic Bridge Type, 43" x
33" Tbl., #4 M.T., 40-2000 RPM, Rotary Table, Much
Tooling, DRO, Exc., 1967 . . . . . . . . . .
$14,500
JIG BORER: #3 MOORE, 11" x 24" Tbl., 18" Long.,
2500 RPM, D.R.O., Tooling, 2 HP, 1966 . . . . . .$3,950
JIG BORER: #1-1/2 MOORE, 10" x 19" Tbl., Tooling,
1963 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,950
JIG BORER: ATLANTIC #4000, 12” x 18” Tbl., 16”X,
12”Y, 2100 RPM, D.R.O., 1 HP, 1965 . . . . . . . .$1,250
JIG BORER: MANEX, 12" x 24" Table, D.R.O.
Micro-Feed, Some Tooling . . . . . . . . . . . . . . . .$1,250
JIG MILL: #4B-60 DEVLIEG, 36" x 60" Tbl., 60"X,
48"Y, 20"Z, #50 Tpr., D.R.O. . . . . . . . . . . . . . .$12,500
LAPPING MACHINE: 55" Peter Wolters #FL-12B, 3
Ring, Cool/Filtr., 10 HP, 1987 . . . . . . . . . . . . . $16,500
AIR COMPRESSOR: 217 HP INGERSOLL RAND
Rotary Screw, 800 CFM, 125 PSIG, 1987 . . . .$2,500
AIR COMPRESSOR: 50 HP GARDNER DENVER
Electra Rotary Screw, #EDECJA, 1990 . . . . . .$5,500
AIR COMPRESSOR: 7.5 HP SPEEDAIRE #32496-2,
2-Stage, Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . .$975
AIR COMPRESSOR: 5 HP GARDNER DENVER
#ADD1011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$650
AIR FILTER SYSTEM:
(2) NEDERMAN Air
Filter/Cleaners, (1) Airomax Dust Collector . .$1,250
ANGLE PLATE: 95" x 48" x 48", Hvy. Duty . .$5,950
ANGLE PLATE: 42" x 34" x 24" . . . . . . . . . . . . .$675
ANGLE PLATES: Set of 2, 61" x 24" x 31" . .$9,000
ANGLE PLATE: 70”W x 57”H x 30” Deep, Steel .$2,450
ANGLE PLATE: 36" x 36" x 18", Drilled & Slotted $2,450
ANGLE PLATE: 33” x 51” x 22” Deep . . . . . . .$1,850
ANGLE PLATES: Set of 2, 15”W, 42”H, 23.5” Deep $2,450
ANGLE PLATES: Set of 2, 18”W, 48”H, 24” Deep .$2,450
ANGLE PLATES: Set of (2) Steel Plates, 18" x 32" x 20",
Drilled & Tapped . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$595
ANGLE PLATES: Set of (2) Steel Plates, 9" x 38" x 35",
Drilled & Tapped . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$395
BALANCER, TOOLHOLDER: HOFFMAN #MTB-5.1,
Single Plate, 10" Dia., 13" Ht. Cap., 15 Lb. Cap., For
#40 Tpr., 1998 . . . . . . . . . . . . . . . . . . . . . . . . . .$6,500
BALANCER: 2,500 Lb. GISHOLT #3S, 24" Sw. x 84"
CC, Updated Solid State Controls, 1960 . . . .$4,750
BAR FEED: LNS Super Hydrobar, 18' Long., 6 Guide
Tubes, Up To 3" Dia. Cap. . . . . . . . . . . . . . . . .$8,950
BAR FEED: LNS SUPER HYDROBAR HS Bar Feed,
#HYS-6.65 HS-5.2, Six Guide Tubes 3/4” to 2-1/2”
Dia., 1987 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,250
ATTENTION EMBROIDERERS:
BAR FEED: FMB Mini Turbo S, Magazine Type, 1/8" to
EMBROIDERY MACHINE FOR SALE: TAJIMA TME
1-3/8" Cap., 12’ Length, Hydraulic Unit, 1992 . .$6,950
612, 12 Sewing Hds., 6 Colors, New 1990’s,
Reconditioned 2000…$6,900
BAR FEED: AUTOMATED PRODUCTION #AML5-42,
Magazine Type, .196" to 1-5/8" Cap., 12' Length,
ENGRAVER, KF12 DECKEL, 3 Dimensional, #2 M.T.,
Hydraulic Unit, 1995 . . . . . . . . . . . . . . . . . . . . .$6,950
9.75” x 27” Fixed Work Table, 15.75” x 15.75” Top
BAR STOCK RACK, Dbl. Sided, 8 Racks Per Side .$475
Template Drag Table, 1 HP, 1.1 to 1.4 Ratio, 60-10,000
RPM, Power Elevation, Collets, 1972 . . . . . . .$1,750
BROACH, HORIZONTAL: 20 Ton x 60" Stroke TY
MILES, Mo# MH-20-60, Tooling, 1992
$14,900
FACING & CENTERING MACHINE: 8" x 84" G & L ENDOMATIC #MC, Mill/Drill, Auto. Cycle, Hydr. Vises .$19,500
BROACH, VERTICAL: 3 Ton TY MILES #MBLD-6-36120R, 120 FPM, 36” Stk., 14-1/2” x 11-1/2” Tbl., 10 HP,
FACING & CENTERING MACHINE:
8" x 44"
1982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,900
GIDDINGS & LEWIS FRASER #MC, (2) Cent. &
Facing Hds., 2 Pwrd. Vises, 50 Tpr., 10 HP .$18,500
CHILLER/HEATER, FOR INJECTION MOLDING
PRESS: CINCINNATI MILACRON #ATC-40250-1.5,
FINISHING SYSTEM: GRAV-I-FLOW Spin Finisher,
#V3-412-50, Rot. Tbl., Load Unload, 8 Fixtures,
48-250 Deg. F., Portable, 1996 . . . . . . . . . . . . .$1,500
1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,500
CHIP WRINGER: MC KENZIE, #1767, 17" Dia. Tub, 5
FLOOR SCRUBBER: 32" TENNANT #480, Walk
Gallon Cap., 1-1/2 HP, 1994 . . . . . . . . . . . . . . .$1,950
Behind, 32" Width, 1995 . . . . . . . . . . . . . . . . . .$2,000
CHUCK: 39-1/2” 4-Jaw Lathe Chuck, A1-15”
FORK LIFT TRUCK: 8000 Lb. CLARK #C5000-S800,
Backing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,750
Solid Tires, Propane Type, Roll Over Bars,
JIG BORER:
COLLET CHUCK: HARDINGE 3L A26, A4 Back $175
4’ Forks, 1986 . . . . . . . . . . . . . . . . . . . . . . . . . .$2,800
#6A SIP Hydroptic
COMPARATOR: 30" SCHERR TUMICO #22-2500, 8"
FORK LIFT TRUCK: 5000 Lb. MITSUBISHI #FGC25,
Bridge Type,
x 35" Tbl., 10, 20 & 50X Lens, D.R.O., Surf. & Profile
Propane, Side Shift, Triple Mast, 189" Lift Ht., Solid
40"X, Rotary Table,
Illum., Pwr. Long. & Vert., 1981, . . . . . . . . . .$14,500
Tires, 42" Forks, 1990's . . . . . . . . . . . . . . . . . . $5,950
1967, $14,500
COMPARATOR: 20" DELTRONIC #DH20-933, 9" x
FORK LIFT: 4,000 Lb. TOWMOTOR #482934024, Lift
Ht. 106”, 40” Forks, Solid Tires, Propane . . . .$2,6-0
25" Tbl., 10, 20 & 50X Lens, D.R.O. . . . . . . . . .$6,950
FORK LIFT TRUCK: 2,000 Lb. CLARK #EC20C, Electric,
COMPARATOR: 14" JONES & LAMSON #FC14, 20X
Battery Charger, Solid Tires, 106" Ht. . . . . . . . . .$2,250
Lens,
Quadracheck II D.R.O., 6" x 30" Tbl. . .$3,200
__________________________________________________________________________________________________________________________
TUBE
BENDER:
2” CRITERION
#50000
Single Head
Compression
Type, Hydr.,
Pressure Die,
1998 $15,500
VIBRATORY BOWL FINISHER: 18 Cu.Ft. ROTOFINISH
#ER-1822 Combo (Processing & Drying Channel),
100" Dia. Bowl Size, Auto. Unloading, 1996, $26,500
LIFT, PLATFORM: GENIE #z30/20HD, Self Propelled,
Articulating Boom, 500 Lb. Cap., 31' Lift Ht., 48" x
30" Platform, Battery Powered, 1992 . . . . . .$14,750
LIFT, SCISSOR: SKY JACK Electric #SJLL3220, 32"
x 90" Platform, 20' Max. Ht., 750 Lb. Cap., Pwr. Horiz.
Travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,950
LIFT TRUCK: 2500# LIFT RITE Pallet Highlifter
Truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$550
LIFT TRUCK: 1500 LB. CROWN #BF58, Electric
Platform Lift,24" x 26" Platform, 67" Ht . . . . . . .$475
LOCKFORMER: #20 BUTTON Punch Snap Lock, 9
Form Stations, 20 Ga. Cap., 65 FPM, 3 HP . . .$4,950
MAGNETIC CHUCK: 24” x 120”, Electromagnetic
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,250
MAGNETIC CHUCK: 6" x 12" HITACHI Magnalock,
Electric, New (4) . . . . . . . . . . . . . . . . . . . . . . Ea. $400
MAGNETIC CHUCK: 6” x 18” BROWN & SHARPE,
Fine Line, Permanent . . . . . . . . . . . . . . . . . . . . .$775
MAGNETIC CHUCK: SUNDSTRAND 6" x 18",
Electric, New (3) . . . . . . . . . . . . . . . . . . . . . . .Ea. $450
MEASURING SYSTEM: HEIDENHAIN, For Machine
Tool Inspection & Acceptance Testing, KGM Grid
Encoders, DB110 Linear Encoder, VM182
Comparator System, 1997 . . . . . . . . . . . . . . . .$9,750
MOTOR: 40 HP GENERAL ELECTRIC D.C.,
240 Volts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$800
MOTORS:
40
RELIANCE
D.C.
Motors,
240 Volts . . . . . . . . . . . . . . . . . . . . . . . . . . .Each $800
MULTI SLIDE: #33 U. S. Baird, Parts Machine . .$2,750
PAPER SHEAR: 42" LAWSON "PACEMAKER II"
Hydr., Pwr. Back Gauge, 42" Cutting Width, 5 HP,
1972 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,450
PLANER: 36" x 36" x 12' ROCKFORD, Openside,
Hydr., 36" x 12' Tbl., Tracer Hd. on Rail, Side Head,
15 HP, 1951 . . . . . . . . . . . . . . . . . . . . . . . . . . .$22,500
PLANER MILL: 48" x 48" x 168" INGERSOLL, Dbl.
Column, 2 Rail & 2 Side Hds. 60" Betw. Columns,
Right Angle Attach., 700 RPM, 30 HP, 1950, Updated
Electrics, 1996 . . . . . . . . . . . . . . . . . . . . . . . . $49,500
PLANER MILL: 36" x 36" x 12' GRAY Handymill,
Openside Mech., 2 Vert. & 1 Side Hd., 20 HP Hds.,
1965 . . . . . . . . . . . . . . . . . . . . . . . . . . .
$44,500
ROLL MARKING MACHINE: #175-10-MPC SCHMIDT,
Hydr., A-B PLC Control, 7 Tons, 6" x 10" Tbl., 7" Cr.
Stk., 5 HP, 1995 . . . . . . . . . . . . . . . . . . . . . . . .$10,500
SANDER, DISC: 23-1/2" LANDONIO #LG600, 12" x
31" Tbl., 2 HP, 2001, Never Used . . . . . . . . . . $2,950
SANDER, BOBBIN: LANDONIO #PRN, 31.8" x 31.8"
Tbl., Oscillation, 4.7" Stroke, 2.4 HP, 2001, Never
Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2,950
SHAPER: 36" CINCINNATI, Plain, Hvy. Duty, 8-102
SPM, Swivel Vise, 15 HP, 1965 . . . . . . . . . . . . .$8,950
SHAPER: 20" CINCINNATI, Univ., Mech., 12-157
SPM, 14" x 20" Tbl., Vise, 5 HP . . . . . . . . . . . .$5,950
SHEET LIFTER: 5 Ton Cap., 67" Width Max. .$2,450
STEADY RESTS: 30" - 60" Lathes, 10" to 30"
Openings, (8) . . . . . . . . . . . . . . . . . . . . . . . . . . .P.O.R.
TABLE, BOX: 20” x 30” x 22” High, T-Slotted,
(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ea. $495
TABLE, BOX, TILT TYPE: 22" x 21-3/4" x 22" Ht., 090 Degree Tilt, (2) . . . . . . . . . . . . . . . . . . . .Ea. $1,950
TABLE, BOX: 19-3/4" x 23-3/4" x 19-3/4" Ht., $950
TABLE, DIE: 3000 LB. Elevating Tbl., 24" x 36" Tbl.,
16" to 40" Ht., (2) . . . . . . . . . . . . . . . . . . . . . .Ea. $350
TABLE, DUPL.: 12" x 24" REGENT #300 . . . . . .$395
TABLE, ELEVATING: 2500 Lb. AUTO QUIP, Hydr., 42"
x 42" Tbl., 37" Max. Ht., 3/4 HP, 1992 . . . . . . .$1,750
TABLE FEED: #150 SERVO, For Bridgeport Type
Mill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$395
TABLE, INDEX: 32" X 32" DE VLIEG Type E, 4 Pos.
Index, (2) . . . . . . . . . . . . . . . . . . . . . . . . . . .EA. $1,950
TABLE, LIFT: 2000 Lb. MECHANICAL, 24” x 26”
Platform, Vert. Range 24” to 42” . . . . . . . . . . . .$350
TABLE: 60” x 60” GIDDINGS & LEWIS Manual
Rotary, 12” Height, 6 Tee Slots, 1969 . . . . . . .$3,950
TABLE, ROTARY: 36" x 36" G & L, Manual Rotation,
4-3/4" Thick, . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,750
TABLE, ROTARY: 25" TROYKE #R25, Manual
Rotation, (2) . . . . . . . . . . . . . . . . . . . . . . . . . .Ea. $990
TABLE, ROTARY:
12" TROYKE #U-12P, Pwr.
Rotation, 2003 . . . . . . . . . . . . . . . . . . . . . . . . . .$3,950
TABLE, ROTARY: 60" X 84" CINCINNATI GILBERT
Air Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500
TABLE, ROTARY: 29” SIP Roto-Optic PD6H, Optics,
1100 Lb. Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,850
TABLE, ROTARY: 24" x 24" x 27" High, 360 Rotate,
90 Deg. Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,250
TABLE, ROTARY: 15” TROYKE, Hand . . . . . . . .$475
Table, Rotary: 15" PALMGREN #1562, Horiz./Vert.,
15" Dia. Tbl., 360 Deg. Rot., New in Box . . . . . .$850
TABLE, ROTARY, CROSS SLIDE: 13” x 13”
ADVANCE #B-13, Cross Slide Tvl. 11”, 1969 . . .$975
TABLE, ROTARY, CROSS SLIDE: 12” x 12” TROYKE
CS12, Cross Slide Travel 10” . . . . . . . . . . . . . . .$950
TABLE, ROTARY, CROSS SLIDE: 11” x 11” TROYKE,
Mounted on 15” Troyke Rotary Table, Cross Slide
Travel 9” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$975
TABLE, TILTING SINE, 48" X 40", Tee Slots on Top &
Side, Crank Tilt . . . . . . . . . . . . . . . . . . . . . . . . .$3,250
TABLE: 18” PRATT & WHITNEY, Tilts 90 Degrees &
Rotates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,200
TABLE: 12" VETCOA Rotary Thread Mill, 1/4 HP,
0-32 RPM, #6000 . . . . . . . . . . . . . . . . . . . . . . . . . .$500
THREADER, PIPE:
4" OSTER #714, Cut Off,
Reaming & Chamfering Attach., 3 HP . . . . . . .$4,950
THREADER: 2" COLLINS #22A Thred-O-Matic, 1/8"
To 2" Cap. Pipe, 1974 . . . . . . . . . . . . . . . . . . . . . .$350
TUBE & BAR CUT OFF MACHINE: 2-1/8” MODERN
#2L, 1/4” - 2-1/8” Cap., 20’ Magazine Bar Feed, 2
Slides, Chamfering, Tooling, 7-1/2 HP, 1983 .$14,500
TUBE & BAR CUT-OFF MACHINE: 3" MODERN #3K,
Third Slide (Chamfering & Deburring), 20' Magazine
Bar Feed, Tooling, 5 HP, 1965 . . . . . . . . . . . .$14,500
TUBE & BAR CUT OFF MACHINE: 3" MODERN #3A,
3 Slides, Chamfering, Single Bar Feed, 1952 .$4,950
TUBE & BAR CUT OFF MACHINE: 4" BARDONS &
OLIVER #34, 20' Magazine Feed, Chamfer Attach.,
Tooling, 10 HPm 1986 . . . . . . . . . . . . . . . . . . .$18,500
TUBE BENDER: 2" CRITERION #50000, Compression,
Single Hd., 2" Dia. x .095", 0-180 Degree, Allen Bradley
PLC Control, 1998, (2) . . . . . . . . . .
EA $15,500
VACUUM SKIN PACKAGING MACHINE: AMPAC #Ship
Mate SP1824B, 18" x 24" Platen, PLC Control .$2,950
VIBRATORY FINISHER: 60 Cu. Ft. ROTOFINISH
Spiratron #ST-60SA, 96” Bowl, Parts Dam, 20 HP,
1974 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14,500
VIBRATORY FINISHER: 22 Cu.Ft. ROTOFINISH
#ST20A "Spiratron", Parts Separator, Timer, 10 HP,
1973 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,500
VIBRATORY FINISHER: 18 Cu. Ft. ROTOFINISH #ER
1822, Spiratron Combo, Inside Processing Channel,
Outside Drying Channel, Separator Gates, Timer, 10
HP, 1996 . . . . . . . . . . . . . . . . . . . . . . . . .
$26,500
VIBRATORY FINISHER: 12 Cu. Ft. ROSEMONT #RB1412, Parts Separator, Timer, 7-1/2 HP, 1984 . . . .$6,950
VIBRATORY FINISHER: 11.2 Cu. Ft. ULTRAMATIC,
Tub (Shaker Type), 24" x 48" x 24" Deep Tub,
7-1/2 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,750
VIBRATORY FINISHER: 10 Cu. Ft. GIANT #GB10,
Parts Separator, Timer . . . . . . . . . . . . . . . . . . .$9,900
VIBRATORY FINISHER: 7 Cu. Ft. ROTOFINISH
"Gemini 700", 48" Dia., Separator, Polyurethane
Liner, 5 HP, 1990 . . . . . . . . . . . . . . . . . . . . . . . .$7,950
VISE, HYDRAULIC: 6" KURT #3610H, .25" Stk., 6"
Opening, (4) . . . . . . . . . . . . . . . . . . . . . . . . . .Ea. $750
WASHER: #200HD BETTER ENGINEERING Parts
Washer, 27" Dia. Rot. Tbl., 32" Work Ht., Wash &
Heat Timers, 1987 . . . . . . . . . . . . . . . . . . . . . . .$1,950
WELDER, ARC: #360 A/BP MILLER . . . . . . . . .$750
WELDER, CRANKSHAFT:
PETERSON #996,
Submerged Arc, 36" Sw. Over Bed, 25" Over Carriage,
62" CC, 250 Amp Pwr., Wire Feed . . . . . . . . . . .$9,950
WELDER, SPOT: 200 KVA SCIAKY #PMC04ST,
Resistance Type, 54" Throat, Water Cooled Tips,
F.I.M. Digi-Log Controls . . . . . . . . . . . . . . . . . .$17,500
WELDER, SPOT: 65 KVA TELEDYNE PEER #AR365,
Rocker Arm, 18" Throat, Entron Control, Water
Cooled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,250
WELDER, SPOT: 50 KVA VIKING #640 ES-1, 25"
Throat, Entron EN 1000 Solid State Control .$2,450
WELDER, SPOT: 35 KVA TELEDYNE PEER #AR335,
Rocker Arm, 18" Throat, Entron Control, Water
Cooled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,750
WELDER, SPOT: 30 KVA TELEDYNE PEER #FR430,
Rocker Arm, 24" Throat, Water Cooled, 220 Volt,
1985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,450
WELDER, SPOT: 20 KVA MILLER #SSW2020ATT,
Water Cooler . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,950
WIRE STRIPPING & CUT OFF: SHIN MEIWA
#AWS130, 12 to 22 Ga., 1 HP, 1977 . . . . . . . . .$1,750
WOODWORKING: 36” GRAND RAPIDS Vertical Band
Saw, 38” x 29” Tbl., 2 HP . . . . . . . . . . . . . . . . .$1,250
WOODWORKING, PLANER: 12” POWERMATIC
#100, 12” x 24” Bed, Stock Thickness Range 1/16” to
5”, 2 HP Motor . . . . . . . . . . . . . . . . . . . . . . . . . .$1,450
WOODWORKING, ROUTER: 2 HP WADKIN Router,
24” x 36” Table . . . . . . . . . . . . . . . . . . . . . . . . .$1,950
__________________________________________________________________________________________________________________________
NEW IMPROVED WEBSITE: www.raco.com
PLANER, MILL:
36" x 36" x
12' GRAY
Handymill,
Openside
Mech., 2
Vert. & 1
Side Hd.,
20 HP Hds.,
1965
$44,500
15
—
— RACO-GRAM —
—
RACO INDUSTRIAL
CORPORATION
2100 S. Wolf Rd.
Des Plaines, IL 60018-1932 USA
CHANGE SERVICE REQUESTED
Presorted Standard
U.S. Postage
PAID
luable
a
V
s
i
h
T
Save Reference!
Machine
Tade Publishing
Attention Machinery Buyers
ROUTE TO:
J PLANT MANAGER
J PURCHASING
J SHOP SUPERINTENDENT
J MANUFACTURING ENGINEERING
TOP MACHINERY VALUES
YOUR #1 SOURCE FOR METALWORKING MACHINERY
SPECIAL OFFER
DISMANTLED & LOADED ON TRUCK
440 Ton
SEYI SUTHERLAND
550 Ton
SEYI SUTHERLAND
Straight Side Double Crank Press, 1995
Straight Side Double Crank Press, 1997
• 12” Stroke
• 30” Shut Height
• 122” x 55” Bed
• 43” Windows
• 25 to 50 SPM
Special Price: $159,500 As Is
w/Complete 36” Coe Servo Feed Line: $179,500 As Is
• 12” Stroke
• 30” Shut Height
• 145” x 61” Bed
• 46” Windows
• 25 to 50 SPM
Special Price: $175,000 As Is
w/Complete 48” Coe Servo Feed Line: $195,000 As Is

to view our online brochure - RACO Industrial Corporation

Transcription

Similar documents

maxcut machine tools - Used Cnc Machines Canada | Cnc Machine

Centra Corporation Centra Corporation

5-Achsen CNC Maschinenbedienung und