monitors - Williams Fire and Hazard Control

Transcription

MONITORS
MONITORS
MONITOR
SECTION INDEX
Daspit Tool™........................................................................................................... E2
Daspit Tool - Truck Mount™................................................................................ E3
Daspit Tool™ - Throw Down Model.................................................................... E4
Alpha MA-HV4 - 4” Aluminum Tiller Bar Monitor......................................... E5
Alpha-E Tiller Bar Montior - 3”........................................................................ E6
“SharpShooter Four” Tiller Bar -4”................................................................... E7
“SharpShooter Four” Dual Handwheel -4”....................................................... E8
Alpha-SHW Single HandWheel Monitor - 3”................................................... E9
Spectrum “Mini- Monitor” - 2”..........................................................................E10
Spectrum High Flow Model 4 Oscillating Monitor / Tiller Bar Control......E11
Spectrum Medium Flow Model 4 Oscillating Monitor....................................E12
Spectrum Marine Grade Model 4 Oscillating Monitor....................................E13
Spectrum Low Flow Model 4 Oscillating Monitor............................................E14
“Durham” Oscillating Monitor Conversion Kit . .............................................E15
Spectrum Direct-Mounted Electric Actuated Monitor..........................E16-E17
Spectrum Electro/Hydraulic Actuated Monitors....................................E18-E19
Monitor & Friction Head Loss Chart................................................................ E20
Hydrant Monitor Stand....................................................................................... E21
PRODUCTS 409-745-3232
E1
WWW.WILLIAMSFIRE.COM
120108
EMERGENCY 409-727-2347
MONITORS
MONITORS
Monitors
Product:
Daspit Tool™
Features:
Patented “Daspit Tool” tank frame clamp with 5” vertical waterway
“Daspit Tool” Specialty Flange Monitor Adapter
“Daspit Tool” Rotator Elbow with Storz inlet and 4.5” (F) NH swivel adapter
Component Weights:
Daspit Tool™ Tank Clamp = 89 lbs
Accessory Component Weights:
90˚ Aluminum Rotator Elbow - 4.5” (F) NH Swivel x 5” Storz = 22 lbs 30˚ Aluminum Rotator Elbow - 4.5” (F) NH Swivel
Elbow x 5” Storz = 9 lbs
4” Aluminum Tiller Bar Monitor w/ 4.5” (F) NH Swivel inlet = 43 lbs
4” Aluminum Dual Hand Wheel Monitor - 4.5” (F) NH Swivel inlet = 50 lbs
Ranger™ 1.5 Nozzle = 22 lbs
Applications:
Sunken roof
Rim Seal fire
Vapor Suppression/Mitigation
Options:
3” Aluminum Waterway Monitor w/Tiller Bar Control
250-1,000 gpm Automatic Nozzle
4” Aluminum Waterway Monitor w/Dual Hand Wheel Control
500-2,000 gpm Automatic Nozzle
Rim Mounted Model
Truck Mounted Model
“Throw-Down” Model
Tank Mount Standard Unit
For US and Foreign Patent and Trademark information, please refer to page IP2
PRODUCTS 409-745-3232
E2
120108
MONITORS
MONITORS
Monitors
Product:
Daspit Tool - Truck Mount™
PRODUCTS 409-745-3232
E3
120108
MONITORS
MONITORS
Monitors
Product:
Daspit Tool™ - Throw Down Model
Component Weights:
Daspit™ Tool Throw Down Mount = 113 lbs
8 Stabilizing stakes = 64 lbs
47.875”
PRODUCTS 409-745-3232
E4
120108
MONITORS
MONITORS
Monitors
Product:
Alpha MA-HV4 Monitor
Description:
Rugged lightweight aluminum construction 4” ID full flow monitor with “Quick Acting” Tiller-Bar control for vertical and horizontal movement. Red powder coat anodized aluminum. The single 4” full-flow waterway with internal turning vanes is designed to provide maximum
efficiency. The “Easy-Lock” brake system insures that the nozzle position “stays put” with the simple twist of an ergonomically designed locking
bar. Monitor features a 3.50” (M) NH outlet and a 4.0” 150# ASA flat-faced flange inlet. Horizontal articulation is 360˚ and vertical travel is 75˚
up and -25˚ down.
PRODUCTS 409-745-3232
E5
120108
MONITORS
MONITORS
Monitors
Product:
Alpha-E Tiller Bar Monitor - 3”
Description:
Rugged, corrosion resistant brass construction; unique configuration flows up to 1250 gpm; compact - just 16” high; 3” NPT female, 3” or
4” 150# ANSI flange; vertical movement 90 degrees above horizontal to 45 degrees below; full, continuous 360 degree rotation; rugged, stainless
steel lock hardware; brass balls in all swivel joints; grease fittings for easy lubricaion; durable acrylic urethane finish
Alpha-E Tiller
Bar Monitor
Waterway
Inlet
Discharge
Material
Vertical
Travel
Horizontal
Rotation
3”
3”-4” Flanged
2.5” NH(M)
Cast Brass
90º
360º
PRODUCTS 409-745-3232
E6
120108
MONITORS
MONITORS
Monitors
Product:
“SharpShooter Four” Tiller Bar -4”
Description:
Superior grade 4” I.D. waterway monitor with tiller bar control for vertical and
horizontal movement. Designed for use in corrosive atmospheres that require the
dependability and durability of an all brass monitor. Single waterway with turning vanes
providing excellent projection for water or foam streams. Flows up to 1,500 gpm.
Tiller bar control with brake band swivels, adjusts, then locks at the vertical and
horizontal position. Vertical setting is from minus (-) 10º to plus (+)70º. Full 360 degree
horizontal travel. Painted red polyurethane finish. 3.5”NH (M) discharge threads. Base
-4” 150 # ASA flange.
Sharpshooter
Four
Waterway
Inlet
Discharge
Material
Vertical
Travel
Horizontal
Rotation
4”
4” Flange
3.5” NH(M)
Cast Brass
80º
360º
PRODUCTS 409-745-3232
E7
120108
MONITORS
MONITORS
Monitors
Product:
“SharpShooter Four” Dual Handwheel -4”
Description:
Superior grade 4” I.D. waterway monitor with dual handwheel/worm gear operation
for vertical and horizontal movement. The ultimate monitor for portable applications
or for fixed installations where precise and positive control are needed. Designed for
use in corrosive atmospheres that require the dependability and durability of an all
brass monitor. Single waterway with turning vanes providing excellent projection for
water or foam streams. Flows up to 1,500 gpm.
Vertical handwheel adjusts trajectory from minus (-) 10º to plus (+)90º. Horizontal handwheel allows for full 360º rotation. Painted red
polyurethane. 3.5”NH (M) discharge threads. Base -4” 150 # ASA flange.
Sharpshooter
Four
Waterway
Inlet
Discharge
Material
Vertical
Travel
Horizontal
Rotation
4”
4” Flange
3.5” NH(M)
Flange
Cast Brass
100º
360º
PRODUCTS 409-745-3232
E8
120108
MONITORS
MONITORS
Monitors
Product:
Alpha-SHW Single HandWheel Monitor - 3”
Description:
Rugged, cast brass construction • Full 3.0” unobstructed waterway • FLows up to 1250 GPM • Handwheel driven worm gear fully enclosed
and protected from the elements • Stainless steel worm • Vertical travel from 70˚ above to 70˚ below horizontal • Gear holds vertical position
wherever it is stopped • Four ball races with bronze balls and grease zerks for easy lubrication • Full 360˚ rotation with positive twist lock •
2.5” male outlet • FM Approved • See chart for base options • Finish red urethene enamel.
Model
Waterway
Inlet
Discharge
Material
Vertical
Travel
Horizontal
Rotation
Alpha-SHW
3”
3” or 4” Flange
2.5” NH(M)
Cast Brass
90º
360º
PRODUCTS 409-745-3232
E9
120108
MONITORS
MONITORS
Monitors
Product:
Spectrum “Mini- Monitor” -2”
Description:
Designed for use in corrosive atmospheres that require the dependability
of an all brass monitor. Suitable for most industrial environments. Flows up
to 300 gpm @ 100 psi. Full 2” I.D. waterway, efficiently designed to minimize
pressure drop. 2” NPT female inlet base, 1.5” NH male discharge tip. Tiller bar
control handle with rubber grip. Vertical (110º) and horizontal (360º) adjustments with positive quarter-turn locking handles. Natural brass finish.
Model
Waterway
Inlet
Discharge
Material
Vertical
Travel
Horizontal
Rotation
Mini
Monitor
2”
2”NPT (F)
1.5” NH(M)
Cast Brass
110º
360º
PRODUCTS 409-745-3232
E10
120108
MONITORS
MONITORS
Oscillating Monitors
Product:
Spectrum High Flow Model 4 Oscillating
Monitor Tiller Bar Control
Description:
For flows between 750 - 1500 gpm. Spectrum High Flow Model 4 waterpowered oscillating monitor is constructed of predominantly corrosion-resistant materials. Cast brass monitor body with stainless steel trim. 4” I.D. water(Nozzle shown for
way with turning vanes. Controls provided for adjusting vertical trajectory as
reference only)
well as horizontal position. Reciprocating motion is generated by a two-way
high performance hydraulic actuator. Oscillation is accomplished through the
use of plated sprockets and a heavy duty drive chain. Standard arc of oscillation is from 0-90˚ and speed of oscillation is from 0-40˚ per second.
Vertical trajectory is from minus (-)10˚ to plus (+)70˚. Standard inlet flange - 4” 150# ASA RF Flange. Monitor is to be used with either a non airaspirating or air-aspirating nozzle. Standard 3.5” NH (M) discharge. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF.
Model
Flow @ 100 PSI
Inlet
Discharge
Water I.D.
High Flow Model 4
Tiller Bar Control
Between 750-1400 gpm
4” 150# ASA RF flange
3.5” NH (M)
4”
PRODUCTS 409-745-3232
E11
120108
MONITORS
MONITORS
Product:
Spectrum Medium Flow Model 4 Oscillating Monitor
Description:
For flows between 150-750 gpm. Spectrum Medium Flow Model 4 low profile
water-powered oscillating monitor features a super-compact design, as well as predominantly corrosion resistant materials of construction. Reciprocating motion is
generated by a two way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets and a heavy duty drive chain. Arc of
oscillation is from 0-185º and speed of oscillation is from 0-40º per second. Nozzle
elevation is from 10º below to 70º above horizontal. Single brass 3” I.D. waterway
with turning vanes provided with positive horizontal and vertical locks. Standard inlet
flange - 4” 150# ASA RF Flange. Monitor can be used with either a non air-aspirating
or air aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No.
J.I.1R6A3.AF.
(Nozzle shown for
reference only)
Model
Flow @ 100 PSI
Inlet
Discharge
Water I.D.
Medium Flow
Model 4
Between 150-750 gpm
2.5” NH (M)
3”
PRODUCTS 409-745-3232
E12
120108
MONITORS
MONITORS
Product:
Spectrum Marine Grade Model 4 Oscillating Monitor
Description:
For flows between 150-750 gpm. Spectrum Marine Grade Model 4 low profile water-powered oscillating monitor features a super-compact
design, as well as construction of totally corrosion resistant materials to include inlet flange, enclosure and drive mechanism, sprocket and chain
— all manufactured in 316 Stainless Steel. Reciprocating motion is generated by a two way high performance hydraulic actuator. Oscillation is
accomplished through the use of plated sprockets and a heavy duty drive chain. Arc of oscillation is from 0-185º and speed of oscillation is from
0-40º per second. Nozzle elevation is from 10º below to 70º above horizontal. Single brass 3” I.D. waterway with turning vanes provided with
positive horizontal and vertical locks. Standard inlet flange - 4” 150# ASA RF Flange. Monitor can be used with either a non air-aspirating or
air aspirating nozzle. Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF.
Model
Flow @ 100 PSI
Inlet
Discharge
Water I.D.
Marine Grade
Model 4
Between 150-750 gpm
2.5” NH (M)
3”
* Minimum operating pressure = 50 psi
PRODUCTS 409-745-3232
E13
120108
MONITORS
MONITORS
Product:
Spectrum Low Flow Model 4 Oscillating Monitor
Description:
For flows between 100-350 gpm. Spectrum Low Flow Model 4 low profile waterpowered oscillating monitor features a super-compact design, as well as corrosion resistant
materials of construction. Reciprocating motion is generated by a two-way high performance hydraulic actuator. Oscillation is accomplished through the use of plated sprockets
and a heavy duty drive chain. Arc of oscillation is from 0-185º and speed of oscillation is
from 0-40º per second. Nozzle elevation is from 30º below to 80º above horizontal. Single
brass 2” I.D. waterway. Provided with positive horizontal and vertical locks. Standard inlet
flange -4” 150#. Monitor can be used with either a non air-aspirating or air-aspirating nozzle.
Oscillating mechanism is Factory Mutual Approved - File No. J.I.1R6A3.AF.
Model
Flow @ 100 PSI
Inlet
Low Flow Model 4
Between 100 - 350 gpm
(Nozzle shown for reference only)
Discharge
1.5” NH(M)
Water I.D.
2”
PRODUCTS 409-745-3232
E14
120108
MONITORS
MONITORS
Product:
“Durham” Oscillating Monitor Conversion Kit
Description:
The Durham Conversion Kit transforms an existing manual station monitor into an oscillator. Designed for use with most 2.5” or 3” I.D. single waterway
monitors, flowing up to 750 gpm. Upgrading foam or water monitor coverage in
any area is now as easy as unbolting the existing monitor and inserting the conversion kit between the flanges. Oscillating mechanism is identical to the one used on
the Spectrum Model 4 Oscillating Monitor and is Factory Mutual Approved - File
No. J.I.1R6A3.AF. Standard inlet and discharge flange is -4” ASA RF Flange 150#.
Optional inlet and discharge flanges available upon request.
Model
Flow @ 100 PSI
Inlet
Discharge
Water I.D.
Durham
Conversion Kit
up to 750 gpm
2.5” or 3”
PRODUCTS 409-745-3232
E15
120108
MONITORS
MONITORS
Remote Control Monitors
Product:
Spectrum Direct-Mounted Electric Actuated
Monitor
Description:
Flows water or foam from 500 to 6,000 gpm. The Spectrum Direct-Mounted Electric
Actuated High Volume/Remote Control Monitor has a programmable oscillation capability, but
may also be overridden with a matched Hydro-Foam™ nozzle operated remotely through
the use of a joystick and switches on a consolidated control panel. Manual operation can also
be accomplished locally through the use of handwheels. Foam concentrate can be proportioned at the nozzle through the use of a jet ratio controller and atmospheric concentrate
storage tank. All electric actuators are reversible, NEMA 7 explosion proof, refinery grade,
F.M. Approved and C.S.A. certified. No external controls, starters, or starters in motor control center are needed. Only power and control
conductors are required. Monitor can be programmed to “return to home” position (horizontal, vertical, nozzle to wide angle fog) after use,
automatically, whether P.L.C. controlled or hard wired.
Two direct mounted electric actuators with speed reducing gear drives installed on the motor enable remote control of horizontal position, as well as vertical trajectory. Field-adjustable limit switches on each actuator allow 340º horizontal rotation and from minus (-)70º to plus
(+)70º vertical travel. Monitor traversing speed is a least 10º per second. A third direct-mounted electric actuator enables remote operation
for the nozzle’s discharge pattern, from wide fog to straight stream.
Weather protective cowlings are provided over all gears and shafts. Monitor and controls are designed for minus
(-)20º F operation. Maximum working pressure is 200 psi.
Stainless Steel monitor (waterway) with red epoxy finish. Includes lifting lug for handling and mounting. Stainless steel swivels with stainless steel ball bearings. Steel/bronze gears. Nickel plated brass shaft. Standard motor voltage is 480/3/60. Standard Control voltages is 120 Vac.
Other voltages are available when required.
NOTES:
• Monitor Mounted Junction Box is NEMA 4X, pre-wired to monitor actuators, with all required electrical interface equipment”
• 4” or 6” fabricated stainless steel waterways provide maximum flow efficiency, minimum friction loss, and provides the ultimate in
product longevity.
• Normally supplied with custom control panel — wireless options available
• Exceeds all known competitors’ specifications, options, and performance
• Suitable for Marine/Dock Protection, and any special hazards protection
• Engineered Tower/Waterway available, heights from 5’ to 40’
• Matched water supply specialty deluge valve and strainer packages available
Model
Nominal flow range
Inlet
Pressure Drop
4” Waterway Monitor
500-1500 gpm
4” flange
@ 1500 gpm-9 psi
1500-3000 gpm
6” flange
@ 3000 gpm-7 psi
2500-6000 gpm
8” flange
@ 6000 gpm-10 psi
PRODUCTS 409-745-3232
E16
120108
MONITORS
MONITORS
Spectrum Direct-Mounted
Electric Actuated Monitor
PRODUCTS 409-745-3232
E17
120108
MONITORS
MONITORS
Product:
Spectrum Electro/Hydraulic Actuated Monitors
Description:
Flows water or foam from 500 to 3,000 gpm. The Spectrum Electro/Hydraulic High
Volume/Remote Control Monitor is operated remotely through the use of a joystick and
switches on a consolidated control panel. Manual operation can also be accomplished locally
through the use of handwheels.
Two hydraulic actuators installed on the monitor enable remote control of horizontal
position, as well as vertical trajectory. Maximum travel is limited to 340 degrees horizontal
travel and from minus (-)70 degree to plus (+)70 degree vertical travel. Monitor traversing
speed is at least 8 degrees per second. A direct-mounted linear hydraulic actuator enables
remote operation for the nozzle’s discharge pattern, from wide fog to straight stream.
Weather protective cowlings are provided over all gears and shafts.
Equipped with a standard non air aspirating fog-to-straight stream nozzle. With a
matched Hydro-Foam™ nozzle, foam concentrate can be proportioned at the nozzle
through the use of a jet ratio controller and atmospheric concentrate storage tank.
Stainless steel monitor (waterway) with red epoxy finish. Includes lifting lug for handling and mounting. Stainless steel swivels with stainless steel ball bearings. Steel/bronze
gears. Nickel plated brass shaft. Anodized aluminum fog/straight stream nozzle.
Model
Nominal flow range
@ 100 psi
Inlet
Pressure Drop
500-1500 gpm
4” flange
@ 1500 gpm-9 psi
1500-3000 gpm
6” flange
@ 3000 gpm-7 psi
PRODUCTS 409-745-3232
E18
120108
MONITORS
MONITORS
Spectrum Electro/Hydraulic
Actuated Monitor
PRODUCTS 409-745-3232
E19
120108
MONITORS
MONITORS
Monitor and Friction Head Loss
Pressure Loss at Indicated Flow
24
23
22
21
20
19
18
17
16
15
14
3”
4”
P 13
S 12
I 11
G 10
9
8
7
6
5
4
3
2
1
0
6”
2”
8”
0500 100015002000250030003500400045005000
U.S. GPM
Note: Pressure losses indicated are nominal and vary slightly with each monitor.
PRODUCTS 409-745-3232
E20
120108
MONITORS
MONITORS
Monitor Accessories
Product:
Hydrant Monitor Stand
Description:
For mounting monitor station (Hydro-Foam™ or water only) onto any
fire hydrant. Standard configuration: water inlet is 2.5” NH(F) brass swivel; 3”
waterway with 90 degree elbow; bolted vertical support stanchions; flanged
discharge (specify either 3” or 4” 150# ASA). Red polyurethane finish.
Monitor Stand shown with Hydrant and Optional
Monitor and Nozzle.
Note: hydrant not included.
PRODUCTS 409-745-3232
E21
120108

monitors - Williams Fire and Hazard Control

Transcription

Similar documents

Timor Monitor - Reptiles by Mack

nEar05 eXperience

An Evening of Elegance

Urban venue spread

ScaleNet® Commercial Water Treatment Systems

Model Octave - Master Meter

SSM-20L1* SSM-14L1 - Fitch Security Integration

sensaphone - Get Connected LLC

View the review and round-up [1.3MB PDF]

SHUTTLE VALVE “SHV”