The Baxi HE System Boiler Range/Heat Only

Transcription

The Baxi HE
System Boiler Range/Heat Only
Range and
Baxi GA System/Combi Boiler
Range
Install warmth, efficiency & peace of mind
Contents
Solo HE A
Megaflo System HE A IE
Bermuda BBU HE
Flue Options
The GA range of combi and system boilers from Baxi
Baxi Neta - tec Combi GA and Baxi Neta - tec Plus Combi GA
Baxi Megaflo System Compact GA
Accessories and controls
Flue options
1
4
7
10
14
17
20
23
25
Solo HE A
Baxi Solo HE A boilers have always been popular
with both installers and homeowners alike.
The simple contemporary lines and soft curves are
bound to appeal to customers, as will the
beautifully simple controls that make it easy to use.
Its clean, compact design makes it perfect where
space is limited.
It may be small in size, but it’s big in performance,
with an extended range of models now available,
making it the perfect heating only choice for any
size property.
>90%
SEDBUK 2005
Band A (>90%)
Key features & benefits:
5-year parts and labour warranty* giving customers
Suitable for use with open vented or sealed
complete peace of mind through heateam
heating systems
SEDBUK 2005 Band A (>90%) rated
Simple controls for easy operation
An Energy Saving Trust recommended product
No pump overrun required, meaning this boiler will
Available in five outputs 12kW, 15kW, 18kW, 24kW and
directly replace any existing heat only boiler
30kW, this modulating boiler fits most size systems
Lightweight, compact design for flexible siting
*Subject to registration and an annual service
Can be installed on a fully TRV system
1
Solo HE A
Return pipe
connection (behind)
Flow switch
Flow pipe
connection
Heat exchanger
Wiring terminal
Burner
Gas valve (behind)
Airbox
Fan protection
thermostat
Fan assembly
Condensate trap
PCB housing
Megaflo Eco SystemFit
The Baxi Solo HE A is compatible with the Heatrae Sadia Megaflo Eco SystemFit cylinder
^ Available in 125-300 litre capacities
^ Supplied with primary expansion vessel and programmable thermostat with timed Domestic Hot Water
(DHW) Control
^ Up to 70% quicker to install
^ Lifetime cylinder guarantee
For further details on the Megaflo range, please call 01603 420220 or visit www.heatraesadia.com
Fully modulating
outputs
SEDBUK 2005 Band
A (>90%)
Ultra low NOx
emissions class 5 helping to protect the
environment
2
Can be located in
unventilated
cupboards or
compartments
5mm Min
Technical specifications
390mm
Baxi Solo HE Series: Wall mounted high efficiency boilers
12 HE A 15 HE A
5mm Min
Sales codes
5120295
CONTROLS
200mm Min
Yes
Yes
Yes
Yes
Yes
Yes
LED Status/Fault Diagnosis Display
Yes
Yes
Yes
Yes
Yes
mm
LPG (Butane/Propane)
15
15
15
15
15
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Nominal Inlet Supply Pressure
mbar
20
20
20
20
20
Maximum Gas Rate
m3/hr
1.34
1.64
1.94
2.31
2.95
kW Max Gross
kW Max Net
13.3
12.0
16.9
15.2
20.2
18.2
24.5
22.1
33.8
30.4
Heat Output CH Non Condensing
kW Max
11.8
15.2
17.8
22
30.2
Heat Output CH Condensing
kW Max
12.8
16.5
19.3
23.8
32.6
%
90.5
91.3
90.4
90.9
90.9
Band
A
A
A
A
A
5
5
5
5
5
mg/kWh
13.1
29.0
11.7
37.0
48.0
Volts/Hz
230V/50Hz
230V/50Hz
230V/50Hz
230V/50Hz
230V/50Hz
No
No
No
No
No
80
Seasonal Efficiency
NOx Levels
ELECTRICAL
Electrical Supply
Permanent Live Required
Electrical Cable Required
3 core x 0.75mm2
Power Consumption
Watts
80
80
80
80
External Fuse Rating
Amps
3
3
3
3
3
Internal Fuse Rating
Amps
3.15
3.15
3.15
3.15
3.15
Ingress Protection Rating
(without electro-mechanical timer fitted)
IPX2
IPX2
IPX2
IPX2
IPX2
Integral 'Boiler Only' Frost Thermostat
No
No
No
No
No
Pump Overrun
No
No
No
No
No
None
MECHANICAL & HYDRAULIC
Compartment Ventilation Required
None
None
None
None
Flow & Return Pipe Size
mm
22
22
22
22
22
Condensate Discharge Pipe Connection
mm
21.5
21.5
21.5
21.5
21.5
No
No
No
No
No
Bypass Required
Vertical Pipe Route
Within Case
CH System Inhibitor Required
298mm
In Operation
5117785
Yes
NOx Class
5mm Min
30 HE A
Yes
SEDBUK Rating
For Servicing
Purposes
5117784
Yes
Heat Input Central Heating
500mm Min
24 HE A
Yes
Natural Gas
At least 1.5°
5120296
User Adjustable CH Temperature
Gas Supply Pipe Size
50mm Min
18 HE A
Concealed User Controls
GAS
600mm
5117783
CONCENTRIC FLUE SYSTEM
Yes
Yes
Yes
Yes
Yes
Outside Diameter
mm
110
110
110
110
110
Standard Horizontal Flue Kit Length
mm
850
850
850
850
850
Max Equivalent Length Horizontal
m
Max Equivalent Length Vertical
m
Equivalent Length per 135° Bend
m
0.5
0.5
0.5
0.5
0.5
m
1
1
1
1
1
mm
80/80
80/80
80/80
80/80
80/80
75
75
75
75
75
75
TWIN PIPE FLUE SYSTEM
Diameters
Max Equivalent Length Horizontal
(parallel pipes)
4 plus Terminal
4 plus Terminal
m
75
75
(parallel pipes)
m
75
75
m
1.3 Air & 2.6 Flue
m
4.8 Air & 9.6 Flue
WEIGHTS
Max Installer Lift Weight
kg
26
26
26
26
26
Gross Packaged Boiler Weight
kg
36.2
36.2
36.2
36.2
36.2
3
The Baxi Megaflo System HE A is designed for fully
pumped sealed systems - and because it’s fully
modulating, it’s the perfect choice for a wide range
of applications.
The Baxi Megaflo System HE A is a sealed system
boiler and can be installed with an unvented
cylinder for mains pressure hot water at each hot
tap in the house.
It’s ideal for fitting in unventilated cupboards, and
comes with a wall mounting frame and integral
isolating valves for easy pre-plumbing and flushing
of the system prior to fitting.
>90%
SEDBUK 2005
Band A (>90%)
Supplied with pre-plumbing jig for easier and labour
saving installation
Integral automatic bypass, suitable for systems
incorporating TRVs to every radiator
Available in five outputs; 15kW, 18kW, 24kW, 28kW and
Comprehensive range of flue options for quick
32kW, this modulating boiler fits most size systems.
installation
Built in frost thermostat for flexible siting
*Subject to registration and an annual service. Terms & Conditions apply.
For full details visit www.baxi.co.uk/warranty
4
Igniter
Stainless steel
heat exchanger
Combustion box cover
and burner
Expansion vessel
Spark electrode
Flame sensing electrode
Air/gas collector
Fan assembly
Venturi
Pump
Gas valve
Condensate trap (behind)
Pressure relief valve
PCB housing
Pressure gauge
Megaflo Eco Unvented Cylinder
The Baxi Megaflo System HE A is compatible with the Heatrae Sadia Megaflo Eco unvented cylinder
^ Available in 70-300 litre options in both direct and indirect models
^ Patented cold water inlet diffuser minimises mixing of cold and hot water
^ High performance 'coil in coil' heat exchanger
^ Lifetime transferable cylinder guarantee
For further details on the Megaflo range, please call 01603 420220 or visit www.heatraesadia.com
Fully modulating
outputs
SEDBUK 2005 Band
A (>90%)
Ultra low NOx
emissions class 5 helping to protect the
environment
5
Can be located in
unventilated
cupboards or
compartments
5mm Min
450mm
5mm Min
200mm Min
(300mm Min if
using 80/125mm
flueing system)
Baxi Megaflo System HE A: Wall mounted high efficiency boilers
15 HE A 18 HE A 24 HE A 28 HE A 32 HE A
Sales code
5121343
CONTROLS
5121344
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2 digits & 3 LEDs
mm
Natural Gas
20
20
20
20
2.61
3.10
3.48
kW Max Gross
kW Max Net
kW Min Gross
kW Min Net
17.1
15.4
4.4
4.0
20.5
18.5
4.8
4.3
27.4
24.7
7.8
7
32.1
28.9
10.8
9.7
36.4
32.8
10.8
9.7
Heat Output CH Non Condensing (70° Mean)
kW Max
kW Min
15
3.9
18
4.2
24
6.8
28
9.4
32
9.4
Heat Output CH Condensing (40° Mean)
kW Max
kW Min
16.2
4.2
19.4
4.5
25.9
7.4
30.3
10.2
34.4
10.2
%
91.2
91.2
91.2
91.2
91.2
Band
A
A
A
A
A
5
5
5
5
5
27.5
31.7
22.3
21.8
26.8
Yes
Yes
Yes
Yes
SEDBUK Rating
NOx Class
NOx Levels
mg/kWhr
ELECTRICAL
Volts/Hz
Yes
1m x 3 core x 0.75mm2
Power Consumption
Watts
130
140
150
160
Amps
3
3
3
3
3
Amps
F2L
F2L
F2L
F2L
F2L
IPX5D
IPX5D
IPX5D
IPX5D
IPX5D
24 hour Pump Exercise
Yes
Yes
Yes
Yes
Yes
Pump Overrun
Yes
Yes
Yes
Yes
Yes
Integral 'Boiler Only' Frost Thermostat
Yes
Yes
Yes
Yes
Yes
None
None
None
None
None
Yes
Yes
Yes
Yes
Yes
Pre-plumbing/Wall Mounting Jig
160
Flow / Return Pipe Size
mm
22
22
22
22
22
Condensate Discharge Pipe Size
mm
21.5
21.5
21.5
21.5
21.5
Yes
Integral Automatic Bypass
* This is the MINIMUM recommended dimension.
Greater clearance will aid installation and maintenance
230V/50Hz
Fitted Electrical Cable
Compartment Ventilation Requirement
In Operation
22
Yes
1.95
MECHANICAL & HYDRAULIC
5mm Min
22
Yes
20
(without electro-mechanical timer fitted)
345mm
22
Yes
1.69
450mm Min
22
Yes
mbar
Electrical Supply
For Servicing
Purposes
22
Yes
m3/hr/kg/hr
Max Gas Rate NG
Seasonal Efficiency NG
At least 1.5°
5121345
On/Off Switch with Reset
GAS
150mm Min*
5118648
LED Temp/Status/Fault Diagnosis Display
780mm
5118063
Yes
Yes
Yes
Yes
Safety Discharge Pressure
bar
3
3
3
3
3
Integral Expansion Vessel
litres
8
8
8
10
10
Maximum Capacity of CH System
litres
125
125
125
125
125
Yes
Yes
Yes
Yes
Yes
mm
315 - 500
315 - 500
315 - 500
315 - 500
315 - 500
m
10
10
10
10
10
CONCENTRIC FLUE SYSTEM
Standard Telescopic Horizontal Flue
Kit Length
Max Equivalent Length
Horizontal/Vertical (60/100mm)
Horizontal/Vertical (80/125m)
m
20
20
20
20
20
m
0.5
0.5
0.5
0.5
0.5
m
1
1
1
1
1
TWIN PIPE FLUE SYSTEM
mm
80/80
80/80
80/80
80/80
80/80
Max Equivalent Length Horizontal/Vertical
(parallel pipes)
Diameters
m
15/15
15/15
15/15
15/15
15/15
m
0.25
0.25
0.25
0.25
0.25
Equivalent Length per 91.5° Bend
m
0.5
0.5
0.5
0.5
0.5
WEIGHTS
Max Installation Lift Weight
kg
38.6
38.6
39.2
41
41
kg
43.6
43.6
44.2
46
46
6
Bermuda BBU HE
The original Baxi Bermuda Back Boiler Unit (BBU),
launched in 1966, was so practical and reliable
that Baxi installations accounted for 80% of the
back boilers installed in the UK & Ireland.
Times changed and so did boilers, but with the
introduction of our innovative Baxi Bermuda BBU
HE we continue our tradition of back boiler
expertise. As the only high efficiency BBU in the
UK, it’s the easiest way to replace an existing BBU.
>90%
SEDBUK 2005
Band A (>90%)
Factory set to enable easy boiler commissioning
Single piece flexible concentric flue; eliminates the
need to provide flue inspection access
Room sealed appliance; eliminating the need for air
15kW heat output; modulating boiler adapts to heat
vents in the room
demand ensuring optimum performance at all times
Simple to use external boiler controls located on the
dedicated DimensionsTM firefront
Built in condensate pump and no pump overrun
required, to ease installation
Quiet in operation
*Subject to registration and an annual service
7
Baxi Bermuda BBU HE
SEDBUK Rating
NOx Class
NOx Levels
ELECTRICAL
ELECTRICAL
Electrical Supply
Electrical Cable Required
Power Consumption
Pump Overrun
MECHANICAL
HYDRAULIC
MECHANICAL &
& HYDRAULIC
Compartment Ventilation Required
Flow & Return Pipe Size
Condensate Discharge Pipe Connection
Bypass Required
Vertical Pipe Route
CONCENTRIC
FLUE SYSTEM
SYSTEM
CONCENTRIC FLUE
Outside Diameter
WEIGHTS
WEIGHTS
Max Installer Lift Weight
ACCESSORIES
ACCESSORIES
Right Hand Plumb Kit
m3/hr
kW Max Gross
kW Max Net
kW Max
kW Max
%
Band
mg/kWh
Volts/Hz
Watts
Amps
Amps
mm
mm
Connections
& Fittings
Flue Sampling
Point
15mm compression
Yes
No
20
1.63
17.1
15.38
15
15.7
90.1
A
5
31
230/50Hz
Yes
4 core wire
112
3
3.15
IPXO
not required
Not
required
No
22 male copper
10
Yes (pressure operated)
no inverted pipework permitted
No
Yes
mm
m
100
100
10 or
1012.5
kg
kg
27
28
Sales Code
720111701
H
Connections
& Fittings
W
D
W (Width) = 430mm
including connections
& fittings
D (Depth) = 330mm
including flue sampling
point
H (Height) = 550mm
including air vent
Site requirements†
Builders
Opening
Fireplace
Opening
490mm
560mm min
SURROUND OR FINISHED
WALL FACE
HEARTH
LEVEL
Solid, non combustible
hearth to support the boiler,
as speci ed in BS 5871.
450mm min
400mm min (with spacer)
486mm min (Reg alia ONLY)
Site requirements†
11 To
To accommodate
accommodate the
the firefront
firefront without
without the
the need
need for
for additional
additional spacers,
spacers, there
there must
must be
be aa gap
gap of
of at
at least
least 95mm
95mm from
from the
the surround
surround or
or finished
finished face
face to
to the
the front
front
of the boiler.
2 If necessary this gap can be increased by the use of spacer kits. Each spacer increases the effective depth of the opening by up to 50mm. Alternatively a
of rebated
firecan
surrounds
are available.
2 Ifrange
necessary
this gap
be increased
by the use of spacer kits . Each spacer increases the effective depth of the opening by up to 50mm. Alternatively a
3 range
When of
surveys
highlight
that space
restricted versus minimum site requirements, the use of rebated surrounds is recommended.
rebated
fire surrounds
areisavailable.
8
595mm
(Reg alia refront
ONLY - 575mm )
Heat Output CH Non Condensing
Heat Output CH Condensing
Air Vent
Yes
Factory Preset
Yes
mm
Boiler dimensions
630mm min heig ht
inside builders opening
CONTROLS
CONTROLS
LED Status/Fault Diagnosis Display
GAS
GAS
Natural Gas
LPG (Butane/Propane)
Maximum Gas Rate
710153301
630mm min
Baxi
BBU HE
SalesBermuda
code
Fire and accessories technical specifications
FIRES
FIRES
All measurements
measurements given
All
givenininmm
mm
Model
Model
DimensionTM Regalia BBU FireFront +
Fire only
Boiler & Fire Fascia Height Fascia Width Fascia Depth Engine Depth Spacer Depth
05847A1 720331401
720
600
45
144
50
0584711 720331301
632
542
38
144
50
DimensionTM Classica Brass BBU FireFront +
0584721 720330701
615
512
51
144
50
DimensionTM Classica Pewter BBU FireFront +
0584701 720330801
615
512
51
144
50
DimensionTM Innova BBU FireFront
*
DimensionTM Dream Gold BBU FireFront +
05847C1 720331001
636
518
79
144
50
DimensionTM Dream Chrome BBU FireFront +
05847D1 720331101
636
518
79
144
50
DimensionTM Lyrica BBU FireFront +
0584511 720331601
612
510
74
144
50
FIRES
ACCESSORIES
Model
Model
Classica, Lyrica, Nano & Innova Spacer Kit
All measurements
measurements given
All
givenininmm
mm
Part Number
5135632
Height
610
Width
503
Depth
Rebate
NA
50
NA
Regalia Spacer Kit
5135633
715
586
50
Dream Spacer Kit
5135634
625
504
50
NA
720111701
NA
NA
NA
NA
05847H1
750
650
157
NA
BBU Wall Fascia
>
Right Hand Plumb Kit
10m Concentric Flexible Flue
710143901
OD Dimension 100mm (complete with terminal)
Flue Pull Cone #
720111801
OD Dimension 100mm (complete with terminal)
+ This fire is floor standing only.
This fire can be wall mounted or floor standing.
For use with the Innova fire
# The flue pull cone must be used for pulling the concentric flexible flue down the chimney. The flue pull cone can then be retained for future installations
*
The 3D diagram to the left displays the key
components of the Baxi Bermuda BBU HE.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
9
Automatic Air Vent
Flue Connection
Spark Generator (located behind PCB)
Spark & Sensing Electrodes (located
behind PCB)
Heat Exchanger (located behind PCB)
User Interface Connector
Control Wiring Connector
Condensate Sump
Gas Cock
Condensate Pump
Fan
Drain
Return Connection
Air Sampling Point
Flue Sampling Point
Flow Connection
Condensate Outlet
PCB Control Box
Boiler Control (cover open)
Flue Options
Flue Options
1.
Baxi Boilers can be fitted with flue systems as illustrated.
2.
The standard flue is suitable only for horizontal termination
applications.
3.
Maximum permissible equivalent flue lengths for Platinum
Combi HE A, Duo-tec Combi HE A, Megaflo system HE A are:
Group A
Group G
20 metres
Horizontal Concentric 10 metres
20 metres
Vertical Concentric 10 metres
Horizontal Twin pipe 15 metres
Vertical Twin Pipe
15 metres
The elbow supplied with the standard horizontal telescopic flue kit
is not included in any equivalent length calculations for
Platinum Combi HE A, Duo-tec Combi HE A, Megaflo system HE A are:
Group A
Group G
135° bend
0.25 metres
Twin Flue Pipe
0.50 metres
91.5° bend
The elbow supplied with the standard horizontal telescopic flue kit is
not included in any equivalent lenth calculations for Solo HE are:
Twin Flue Pipe
135° bend (air duct)
135° bend (flue duct)
91.5° bend (air duct)
91.5° bend (flue duct)
Maximum permissible equivalent flue lengths for Solo HE A are:
Horizontal Concentric
Vertical Concentric
Horizontal Twin pipe
Vertical Twin Pipe
4.
4 metres
4 metres
75 metres (parallel pipes)
75 metres (parallel pipes)
1.3 metres
2.6 metres
4.8 metres
9.6 metres
The elbow supplied with the boiler is not included in any equivalent
length calculations.
Any additional “in line” bends in the flue system must be taken
into consideration. Their equivalent lengths for Platinum
Combi HE A, Duo-tec Combi HE A, Megaflo system HE A and Solo HE A
are:
Group G
Group A
Concentric Pipes
135° bend
0.5 metres
93° bend
1 metre
5.
The illustrations show examples of permissible flue systems.
6.
Instructions for guidance and fitting are included in each kit,
where appropriate.
GROUP A Concentric Horizontal Flue System 60/100mm diameter for use with Platinum Combi HE A, Duo-tec Combi HE A and Megaflo HE A
Key
Not illustrated
Item Description
Specification
OD
Dimensions
Multifit
Sales Code
Standard Horizontal Telescopic Flue inc Elbow
315mm - 500mm
60/100mm
5118069
Standard Horizontal Flue inc Elbow
685mm
60/100mm
5118489
Telescopic Internal Flue Kit
100mm
5119654
Flue Extension
1000mm
100mm
5111074
Flue Bend
93 degree
100mm
5111075
Flue Bend (Pair)
135 degree
100mm
5111085
Flue Bend
135 degree
100mm
5111076
100mm
5111067
Not illustrated
Flue Internal Fixing Kit / Wall Liner
Not illustrated
Pipe Support
Not illustrated
Flue Terminal Deflector
Not illustrated
Low Profile Flue Elbow
Painted white
93 degree
100mm
5111080
60mm
5111068
100mm
720550801
NOTE: The 3 degree fall back on concentric flues can be reduced to 1.5 degree providing the flue system is adequately clamped in accordance with
the installation instructions.
GROUP A Concentric Vertical Flue System 60/100mm diameter for use with Platinum Combi HE A, Duo-tec Combi HE A and Megaflo HE A
Key
Item Description
Specification
Vertical Flue Terminal
Not illustrated
Not illustrated
OD
Dimensions
Multifit
Sales Code
100mm
5118576
Flue Extension
1000mm
100mm
5111074
Flue Bend (Pair)
135 degree
100mm
5111085
Flue Bend
93 degree
100mm
5111075
Pipe Support
Painted White
100mm
5111080
Pitched Roof Flashing
25/50 degree
125mm
5122151
Flat Roof Flashing
125mm
246144
Roof Cover Plate
125mm
246143
10
Flue Options
GROUP B Concentric Horizontal Flue System 70/110mm diameter for use with Solo HE A
Key
Item Description
Specification
OD
Dimensions
Multifit
Sales Code
Standard Horizontal Flue inc Elbow
850mm
110mm
236921
Horizontal Flue / Wall Terminal
850mm
110mm
243013BAX
110mm
5106888
Flue Extension
1000mm
110mm
241695
Flue Extension
500mm
110mm
241694
Flue Extension
250m
110mm
241692
Flue Bend
93 degree
110mm
241687
Flue Bend (Pair)
135 degree
Vertical Flue Adaptor (Boiler)
Not illustrated
Pipe Support
Not illustrated
Flue Terminal Deflector
110mm
241689
110mm
243014BAX
248167
NOTE: The 3 degree fall back on concentric flues can be reduced to 1.5 degree providing the flue system is adequately clamped in accordance with
the installation instructions.
GROUP B Concentric Vertical Flue System 70/110mm diameter for use with Solo HE A
Key
Not illustrated
Item Description
OD
Dimensions
Specification
Vertical Roof Terminal
70/110mm
242802
Vertical Flue Adaptor (Boiler)
110mm
5106888
Flue Extension
1000mm
110mm
241695
Flue Extension
500mm
110mm
241694
Flue Extension
250m
110mm
241692
Flue Bend
93 degree
110mm
241687
Flue Bend (Pair)
135 degree
Pipe Support
25/50 degree
Flat Roof Flashing
Not illustrated
Multifit
Sales Code
110mm
241689
110mm
243014BAX
125mm
243015
125mm
Roof Cover Plate
243016BAX
243131
GROUP G
Concentric Horizontal Flue System 80/125mm diameter for use with Platinum Combi HE A, Duo-tec Combi HE A and Megaflo HE A
Key
Item Description
Specification
Horizontal Flue inc Boiler & Terminal Adaptor
Not illustrated
OD
Dimensions
Multifit
Sales Code
125mm
5118580
Flue Extension
1000mm
125mm
5118584
Flue Bend
91.5 degree
125mm
5118588
Flue Bend (Pair)
135 degree
125mm
5118597
Pipe Support
Painted white
125mm
5118610
11
Flue Options
GROUP G
Concentric Vertical Flue System 80/125mm diameter for use with Platinum Combi HE A, Duo-tec Combi HE A and Megaflo HE A
Key
Not illustrated
Not illustrated
OD
Dimensions
Multifit
Sales Code
Vertical Flue Terminal
125mm
5111078
Flue Vertical Adaptor
100/125mm
5111070
Item Description
Flue Extension
1000mm
125mm
5118584
Flue Bend
91.5 degree
125mm
5118588
Flue Bend (Pair)
135 degree
125mm
5118597
125mm
5118610
Pipe Support
Not illustrated
Specification
25/50 degree
125mm
5122151
Flat Roof Flashing
125mm
246144
Roof Cover Plate
125mm
246143
GROUP K
Plume Displacement Kits 60/100mm diameter for use with Platinum Combi HE A, Duo-tec Combi HE A and Megaflo HE A
Key
Item Description
Specification
OD
Dimensions
100mm
5118638
1000mm
60mm
5121368
Plume Displacement Kit inc Elbow & Clips
Plume Displacement Kit Extension inc Clip
Plume Displacement Kit Bend
93 degree
60mm
5121369
Plume Displacement Kit Bend (Pair)
135 degree
60mm
5121370
OD
Dimensions
Multifit
Sales Code
GROUP L Plume Displacement Kits 70/110mm diameter for use with Solo HE A
Key
Multifit
Sales Code
Item Description
Specification
Plume Displacement Kit inc Elbow & Clips
110mm
5121371
Plume Displacement Kit Extension & Clip
1000mm
70mm
5121372
Plume Displacement Kit Bend
93 degree
70mm
5121373
Plume Displacement Kit Bend (Pair)
135 degree
70mm
5121374
12
Stockist:
Available from all Heatmerchants branches nationwide
Email: [email protected]
Warranty Support:
Contact your local Heatmerchants branch for assistance
Works Installer loyalty Scheme:
Find out more on Works2gether.ie
Potterton Myson Ireland Ltd.
Unit F6, Calmount Park, Calmount Road, Ballymount, Dublin 12, Ireland
T 00353 (0) 1 459 0870 F 00353 (0) 1 459 0880
E [email protected] W www.potterton-myson.ie
MYSON

The Baxi HE System Boiler Range/Heat Only

Transcription

Similar documents