kent-automotive.com • 888.YES.KENT (937.5368)

Transcription

TABLE OF CONTENTS
BODY HARDWARE
Pages 3 – 13
BODY CHEMICALS
Pages 14 – 16
SHOP SUPPLIES
Pages 16 – 19
CUTTING TOOLS
AND ABRASIVES
Pages 19 – 21
FREE
Roller Rack
Purchase Four Assortments and
Receive a Roller Rack at No Charge!
FASTENERS
Pages 21 – 23
Note: K
T and P assortments are provided in orange drawers.
LP Assortments are provided in brown drawers.
KL121_Honda Body Hardware
Assortment
SERVICED ONLY BY
*KL121*
1
2
*P13794*
P13794
Bumper Retainer
16mm Head Dia., 4mm Stem Dia.
21mm Stem Length, Black Nylon
7
®
KL121
*P15548*
P15548
8
*P23963*
P23963
Screw-Type Cowl Grille Rivet
14mm Washer Head Dia.
11mm Long, Fits into 7mm Hole
13
*P52614M01*
P52614M01
*KT11377*
KT11377
3
9
4
*P30196*
P30196
14
*P53979*
P53979
Cowl Grille Retainer
Fits into 8mm Hole
20
*KT11378*
KT11378
15
*P80583*
P80583
10
*KT11609*
KT11609
Hood Insulation Retainer
30mm Head Dia.
Fits into 6mm Hole
Front Fender Pin, Drive-Type Rivet Hood Seal Retainer, 12mm Head Dia.
Fits into 8mm Hole, 4mm Grip Range 9mm Stem Length, Fits into 7mm Hole
pieces
*P30211*
P30211
1-888-937-5368
16
*KT11316*
KT11316
5
*KT11698*
KT11698
Fender Splash Shield Pin Drive Rivet
20mm Flange Dia.
Fits into 8mm Hole
*P15599*
P15599
6
*KL103*
11
*P42900*
P42900
12
*KT11334*
KT11334
*KT11701*
KT11701
7
*P52553*
P52553
*P20746*
P20746
*P45576*
P45576
19
24
*P68173*
P68173
*KL120*
1
®
KL120
*P15547*
P15547
2
Door Trim Retainer
18mm Head Dia., 13mm Stem Length
21mm Overall Length
Fits into 8mm Hole, Nylon
Retaining Clip
6mm Panel Thickness
7
8
*P20467M01*
P20467M01
Trim Board Retainer
13mm Small Head Dia.
18mm Large Head Dia.
14mm Stem Length
Fits into 9mm Hole, White Nylon
Push-Type Retainer
Fits into 7mm Hole
13
*P30166*
P30166
Front Fender Screw Grommet
M6.3 Screw Size
19
*KT13148*
KT13148
Fender Moulding Clip
Blue Nylon
125
pieces
KA24
*P23177*
P23177
14
*KT13832*
KT13832
Gas Filler Door – Blind Rivet
Fits into 6mm Hole
M4.8 Rivet Dia., 14mm Flange Dia.
1.6mm – 6.35mm Grip Range
Aluminum Rivet with Steel Mandrel
and Plastic Seal
20
*KT13149*
KT13149
Red Nylon
Confidential Material, Reproduction, In Whole Or In Part, Prohibited.
3
*P18342*
P18342
Scuff Plate Retainer
11mm Stem Length
Fits into 9mm Hole, White Nylon
9
*P23566*
P23566
4
KA24
Printed in U.S.A. (2/11)
*KT12807*
KT12807
10
*KT13150*
KT13150
*P24213*
P24213
Door Moulding Clip with Sealer
15mm Square Head Size
9mm Stem Length
Fits into 8mm Hole
Butterscotch Nylon
16
Mouldings – Blind Rivet
Fits into 4mm Hole
M3.2 Rivet Dia., 8mm Flange Dia.
1mm – 4.75mm Grip Range
Black Aluminum Rivet with
Steel Mandrel and Plastic Seal
21
1-888-937-5368
*KT12972*
KT12972
Nylon “U” Nut
18mm Wide, 27mm Length
Up to 3mm Panel Range
14mm Center of Hole to Edge
Black Nylon
22
14
*P49747*
P49747
Anchor Clip
20
*P69122*
P69122
4
Retainer, Windshield Washer
3mm Hose, 7mm Square Hole
9
*P23453*
P23453
*P52556*
P52556
10
Screw-Type Rivet
M8 Hole Dia.
6mm – 8mm Grip Range
*P80652*
P80652
PHOTOS ACTUAL SIZE
5
*P15569*
P15569
Front and Rear Bumper
Push-Type Retainer
20mm Head Dia.
25mm Stem Length,
Fits into 10mm Hole
*P24082*
P24082
11
Front Push-Type Retainer
16
*P52614M01*
P52614M01
Retainer, Cowl Top
M14 Head Dia.
Plastic
Cowl Retainer
21
*P15568*
P15568
Hood Seal Retainer
M5 Hole, M16 Head Dia.
Push-Type Retainer, Front Fender
M8 Hole Dia., M20 Head Dia.
10mm Stem Length
15
Moulding Retainer Clip
22
*P24242*
P24242
6
*P53834*
P53834
12
*P43085*
P43085
Rivet, M5 Hole Dia.
M15 Washer Head
18
Screw-Type Rivet
Fender Splash Shield
M8 Hole Dia., M20 Washer Face
23
*P20488*
P20488
Drive-Type Rivet
M8 Hole Dia.
M20 Washer Head, 14mm Length
Weatherstrip Retainer
17
*P68167*
P68167
Screw-Type Rivet
M10 Hole Dia.
24
99
Nut Anchor
Plastic
SERVICED ONLY BY
*KL105*
PHOTOS ACTUAL SIZE
5
*P18412*
P18412
10mm Stem Length
25mm Head Dia.
Fits into 7mm Hole
Black Nylon
Fender Lining Screw Grommet
No. 12 Screw Size, 20mm Head Dia.
22mm Stem Length
Fits into 8mm x 8mm Hole
Quarter Board
Inside Trim Panel Retainer
11mm Stem Dia., 11mm Stem Length
Natural Nylon
15
*P18348*
P18348
*P21640*
P21640
*P15550*
P15550
1-888-937-5368
NOTE: Bottom of backplate represents front of LP drawer.
pieces
KL105_Toyota Body Hardware
Assortment
KENT AUTOMOTIVE
Toyota Body Hardware
*P15548*
P15548
8
Screw-Type Rivet
M10 Hole Dia.
3
Weatherstrip Clip
Screw Rivet
KL120_Toyota Body Hardware
Assortment
SERVICED ONLY BY
*P15537*
P15537
Retaining Nut, M3 Screw Dia.
7mm x 7mm Hole Size
13
18
Bumper/Front Grille Pin Drive Rivet
10mm Flange Dia.
Fits into 10mm Hole
2
Belt Moulding Clip
Plastic
Hood Seal Retainer
Natural Nylon
23
KENT AUTOMOTIVE
Honda Body Hardware
®
KL103
*P13778*
P13778
Cowl Retainer
Fits into 6mm Hole
17.5mm Washer Head Dia.
Cowl Panel Retainer
Fits into 6mm Hole
17
1
*P20458*
P20458
Trim Panel Retainer
20mm Head Dia.
15mm Stem Length
Fits into 5mm Hole
Front Bumper Push-Type Retainer
Fits into 10mm Hole, Black Nylon
Front and Rear Trim Retainer
Gray Nylon
22
SERVICED ONLY BY
PHOTOS ACTUAL SIZE
Screw Grommet
Grommet Nut
13mm Square Head, 5mm Screw Size
Fits into 8mm Hole, Plastic
21
*P15587*
P15587
Bumper Grommet
Natural Nylon
Headlamp Bezel and
Interior Screw Nut
150
KA24
*P15566*
P15566
Drip Moulding Clip
Blue Nylon
Cowl Retainer
14mm Head Dia.
19
KENT AUTOMOTIVE
Honda Body Hardware
Retaining Clip
Push-Type Retainer
6mm Panel Thickness
*P20873*
P20873
KL103_Honda Body Hardware
Assortment
11
*P24234*
P24234
6
*KT12974*
KT12974
Front Door Trim Panel Retainer
10mm Stem Dia., 14mm Stem Length
Natural Nylon
23
1
*P15545*
P15545
7
*P24177*
P24177
Bumper Cover Push-Type Retainer
Fits into 9mm Hole
12
Rocker Panel Clip
Fits into 9mm Hole, Black Nylon
17
*P20398*
P20398
2
Retaining Clip
*P30151*
P30151
13
*KT12987*
KT12987
Hood and Fender Screw Grommet
#12/M5.5 Screw Size
Black Nylon
*P30871*
P30871
19
KENT AUTOMOTIVE
Toyota Body Hardware
*P20467M01*
P20467M01
3
*P20746*
P20746
*P24252*
P24252
9
*P27616*
P27616
14
*P33046*
P33046
*P39501*
P39501
PHOTOS ACTUAL SIZE
5
*P21640*
P21640
*P27685*
P27685
11
*P30221*
P30221
*P47067*
P47067
17
*P49191*
P49191
Rear Bumper Cover Retainer
*P30226*
P30226
18
*P80652*
P80652
Cushion Clip
Front Bumper
Nut Anchor
Plastic
Screw Grommet Nut
23
*P23263*
P23263
12
Screw Rivet
Retainer
Bumper Strip
22
6
Anchor Clip
Fender Liner Screw Grommet
16
Panel Clip
Weatherstrip and Trim
21
*P20962*
P20962
1-888-937-5368
Bumper Cover Retainer
10
Clip, Inner Fender
M5 Hole Dia.
15
Clip
Trim Panel
20
4
Anchor Clip
Drive-Type Rivet
Front Fender Splash Shield
M7 Hole Dia., 3mm Grip
24
®
Push-Type Retainer
8
Black Nylon, M30 Head Dia.
17mm Stem Length
Interior Door Trim
Panel Retainer
18
KL105
24
Fender and Wheel Flare Moulding Clip
Yellow Nylon
95
KA24
3
pieces
4
KL209_Miscellaneous Asian and European Clips Assortment
SERVICED ONLY BY
1
®
KL209
*KL209*
*P33252*
P33252
2
*P33262*
P33262
Screw Anchor Nut
Toyota
Nissan
Toyota OEM No. 90189-04014
7
*P21640*
P21640
8
*P49191*
P49191
Screw Grommet Nut
Nissan 1986+
OEM Nos.: Toyota 90189-06001,
Nissan 01281-00023, Mitsubishi MB098145
14
*KT11715*
KT11715
Front Fender Clip
Toyota Solara, Highlander, Sienna and
4Runner 2000+; Lexus GX470 2003+
Use with KT13602
Plastic
19
*P43085*
P43085
20
*KT12847*
KT12847
9
185
4
*KT12333*
KT12333
15
*P69122*
P69122
10
*KT13586*
KT13586
Fender Liner Drive-Type Rivet
Toyota Land Cruiser 1998+, RAV4 2001+
and Lexus LX470 1998+
18mm Flange Dia.
6.5mm Stem Length
3.5mm Panel Range
Fits into M7 Hole
Plastic, Textured Head
*KT12326*
KT12326
Front and Rear Bumper Cover,
Front Bumper Grille Drive-Type Rivet
BMW 3, 5 and 7 Series, 1995+
BMW OEM No. 51118-174-185
M6 Hole, 20mm Flange
17mm Stem Length
Plastic
16
PHOTOS ACTUAL SIZE
5
*P30221*
P30221
22
*KT13998*
KT13998
Engine Under Cover Drive-Type Rivet
Toyota Avalon, Camry, Solara 2002+;
Lexus ES300/330 2002+
M7 Hole Dia., 20mm Flange
10mm Stem Length, 2.2mm – 6.5mm Panel Range
Plastic
*P30211*
P30211
6
*P20746*
P20746
11
*KT12325*
KT12325
12
Front Bumper, Rear Wheel Opening Liner, Scuff Plate,
Interior Trim Drive-Type Rivet
BMW 3, 5, 7 and X5 Series, 1989+
BMW OEM No. 51111-944-537
15mm Stem Length
Plastic
17
*P13802*
P13802
*P20467M01*
P20467M01
*P85031*
P85031
Bumper and Rocker Panel Drive-Type Rivet
Toyota Camry 2007; Lexus
RX335, 350 and 400h 2004+
OEM No. 90467-08180
12mm Stem Length, 7mm Panel Range
Plastic, Textured
18
Cowl Panel and Luggage Compartment Retainer
Toyota Avalon, Camry, Celica and Solara 1993+
Black Nylon
16mm Head Dia.
9mm Stem Length
Fits into 7mm Hole
23
SERVICED ONLY BY
*KL210*
1
*P20873*
P20873
*P15566*
P15566
13
19
*P20962*
P20962
Bumper Cover Push-Type Retainer
Toyota Camry 1992+
Fits in 9mm Hole
KA24
*KL211*
1
KL211
*KT13502*
KT13502
2
Honda Civic and CRV and Acura 3.5L and RSX 2000+
Honda OEM No. 91501-S1K-003
30mm Head Dia.
15mm x 20mm Stem Dia.
14mm Stem Length
Black Nylon
7
*P18412*
P18412
*P15545*
P15545
8
*P15546*
P15546
Retainer with Seal
Toyota Pickup Truck
Pontiac Vibe
OEM Nos.: Toyota 62955-20020, GM 94848834
15mm Head Dia.
9mm Stem Length
Fits into 8mm Hole
Nylon
135
180
pieces
pieces
KA24
3
*P24177*
P24177
14
*P42900*
P42900
Cowl Panel Retainer
Honda Prelude 1983+
Honda OEM No. 90688-SB0-003
M6 Hole
20
*P33046*
P33046
Trim Panel Clip
Toyota Products
OEM Nos.: Toyota 90467-08004 and
90467-08011-83, GM 94849113 and 94842841
*P15568*
P15568
4
Hood Insulation Retaining Clip
Honda and Acura 1990+
Honda OEM No. 91520-SM4-C010
Nylon
10mm Head Dia.
10mm Stem Length
Fits into 6mm Hole
9
Toyota Camry 1988+
30mm Head Dia.
17mm Stem Length
Fits into 7mm Hole
Black Nylon
Retaining Clip
Toyota
Toyota OEM No. 90467-06161-01
14mm Head Dia.
10mm Stem Length
3mm Panel Thickness
Fits into 5mm Hole
Nylon
19
*P49747*
P49747
*P52553*
P52553
*P28296*
P28296
10
*P39501*
P39501
Trim Panel Clip
Toyota Products
Nissan Products
OEM Nos.: Toyota 90467-07050 and 90467-08008,
Nissan 01553-00172
*P30191*
P30191
Cowl Retainer
Honda Products
Honda OEM No. 90687-SA5-0030
16
Cowl Panel Retainer
Nissan Products
OEM Nos.: Nissan 66860-01W01, GM 94051993
21
5
Hood Seal Retainer
Civic, Integra 1994+
9mm Stem Length
Cowl Retainer
Honda Accord, CRX 1986+
Honda OEM No. 91524-SE0-003
15
*KT11378*
KT11378
*P69252*
P69252
*KT12984*
KT12984
1-888-937-5368
PHOTOS ACTUAL SIZE
*KT11609*
KT11609
6
*KT11704*
KT11704
Push-Type Retainer
Honda 1990+
Honda OEM No. 91502-SPO-003
20mm Head Dia.
25mm Stem Length
Fits into 10mm Hole
Black Nylon
9
20
*P23263*
P23263
*KT12848*
KT12848
Bumper Clip Push-Type Retainer
Nissan Maxima 1994+
Nissan OEM No. 01553-09611
18mm Head Dia.
12mm Stem Length
Fits into 8mm Hole
Black Nylon
15
Front and Rear Bumper Pin Drive Rivet
Honda Accord 1998+
M10 Hole Dia., M20 Flange Dia.
*KT11695*
KT11695
Cowl Grille
Toyota Camry 1998+
21
Toyota Tercel 1988+
Toyota OEM No. 52161-02020 and 52161-16010
18mm Head Dia.
28mm Stem Length
Fits into 9mm Hole
Black
11
*P20488*
P20488
12
Drive-Type Cowl Grille Rivet
Honda Accord 1990+
Nissan Trucks 1987+
OEM Nos.: Honda 91545-SE0-0030-WI,
Nissan 63848-01G00
8mm Hole, 20mm Washer Head, 14mm Length
17
*P15544*
P15544
*KL214*
1
*P53979*
P53979
18
*P24234*
P24234
Push-Type Retainer
Honda Civic and DelSol 93–97
Honda OEM No. 91501-SO4-003
Fits into 8mm Hole
7
*P85032*
P85032
Fender U-Nut
Nissan 1995+ and Infinity 1996+
OEM No. 76882-0M000
M4.8 (#10) Screw, 20mm Width
20.5mm Length, 8mm Throat
Plastic
13
*P85057*
P85057
19
Trim Panel Retainer
Toyota RAV4 and Tundra 2000+
13mm Top Head Dia.
16mm Middle Head Dia.
18mm Bottom Head Dia.
9mm Stem Dia.
15mm Stem Length
White Nylon
*KT13148*
KT13148
Toyota Highlander, Land Cruiser, Tacoma
and Tundra 2001+
17mm Head Dia.
17mm Stem Length
Blue Nylon
2
*KT11699*
KT11699
4
*KT13321*
KT13321
Push-Type Retainer
Acura 3.5L, Honda Accord and
Odyssey 1996+
Honda OEM No. 91503-SZ5-003
20mm Head Dia.
18mm Stem Length
Fits into 10mm Hole
Black Nylon
10
*P15600*
P15600
Bumper Push-Type Retainer
Nissan 240SX and Maxima 1994+
18mm Head Dia.
15mm Stem Length
Fits into 10mm Hole
Black Nylon
16
*KT13773*
KT13773
PHOTOS ACTUAL SIZE
5
22
*KT11713*
KT11713
*P85253*
P85253
6
Bumper and Splash Shield
Push-Type Retainer
with Metal Insert
Acura MDX, RDX and TSX
and Honda Accord, Civic CR-V,
and Fit 2004+
Honda OEM No. 91506-S9A-003
20mm Head Dia.
16mm Stem Length
Fits into 10mm Hole
Black Nylon
11
*KT13499*
KT13499
Grille Mounting Push-Type Retainer
Honda Element 2003+
Honda OEM No. 91503-S0K-A01
20mm Head Dia.
14mm Stem Length
Fits into 10mm Hole
Black Nylon
*P85042*
P85042
12
*KT13537*
KT13537
Front Bumper and Radiator Support
Push-Type Retainer
Nissan Altima, Maxima, Quest and
Infiniti FX 35/45 2002+
Nissan OEM No. 11296-AG000
20mm Head Dia.
13mm Stem Length
Fits Into 8mm Hole
Black Nylon
Front Bumper and Radiator Support
Drive-Type Re-Usable Rivet
Nissan Altima, Maxima and Quest
2002+, Infiniti FX35/45 2003+
Nissan OEM No. 11296-AG000
20mm Flange Dia.
13mm Stem Length
2mm – 6mm Panel Range
Fits into M8 Hole
Plastic, Textured
17
18
*KT14303*
KT14303
Toyota, Lexus, and Scion 1995+
Toyota OEM No. 90467-A0008
19mm Head Dia.
7.5mm Stem Dia.
16mm Stem Length
Black Nylon
Toyota, Lexus and Scion 1995+
M6.35 Hole Dia., 19mm Head Dia.
16mm Stem Length, 2.7mm – 7.3mm Panel Range
Plastic
Front Bumper Pin Drive Rivet
Nissan and Toyota 1995+
M9 Hole Dia., M12 Stem
23
*KT12981*
KT12981
*KT13999*
KT13999
Bumper Covers and Grille Drive-Type Rivet
Toyota and Scion 2000+
31mm Stem Length, 3.5mm – 10mm Panel Range
Plastic
24
Luggage Compartment Trim Retainer
Toyota Camry 1999+
16mm Head Dia.
8mm Stem Dia.
16mm Stem Length
Black Nylon
Bumper Cover Screw Drive Rivet
Toyota 1998+
135
pieces
KA24
®
KENT AUTOMOTIVE
Asian Fender Body Hardware
*KT14283*
KT14283
3
Fender Apron Retainer
Honda Civic and Odyssey 2005+, Acura TSX 2004+
Honda OEM No. 90682-SEA-003
9mm Square Hole, 20mm Flange
14mm Overall Length, 3.5mm Panel Range
Plastic
8
*KT13536*
KT13536
*P53834*
P53834
Fender Splash Shield Screw-Type Rivet
Honda Accord 1990+
Honda OEM No. 91512-SM4-003
9
*P58940*
P58940
4
*P24082*
P24082
10 *KT13535*
KT13535
Inner Fender Panel Clip
Nissan, Infiniti Models 1989+
Nissan OEM Nos. 63848-D4000 and 63848-D4001
M5 Hole
Black
Bumper, Rocker Panel and Lamp Mounting Grommet
Nissan 240SX, Altima, Maxima, Pathfinder and Quest
1996+, Infiniti G35, Q45 and QX4 1997+
M6.3 (#14) Screw Size
20mm Flange Dia.
17mm Overall Length
3mm Panel Range
Fits into M10 Square Hole
Plastic with Seal
14
15
16
*P27616*
P27616
Fender Clip
Toyota
M5 Hole Dia.
Black Nylon “U” Nut
Inner Fender Well Attaching Clip
Nissan Various Models
Chevrolet Nova
M5
20
*KT13149*
KT13149
and Tundra 2001+
17mm Head Dia.
13mm Stem Length
Red Nylon
*KT11529*
KT11529
21
*KT13150*
KT13150
Fender and Wheel Flare Moulding Clip
and Tundra 2000+
17mm Head Dia.
17mm Stem Length
Yellow Nylon
1-888-937-5368
PHOTOS ACTUAL SIZE
5
Front Fender Push-Type Retainer
Acura 3.5 RL
Honda Accord, Prelude and Odyssey 94–97
Honda OEM No. 91512-SX0-003
Fits into 8mm Hole
Bumper, Fender and Lamp Mounting Grommet
Nissan 240SX, Altima, Frontier, Maxima, Pathfinder,
Quest and Xterra 1989+; Infiniti G20, I30/35 and QX4
1991+
M4.2 (#8) Screw Size
16mm Flange Dia.
11mm Overall Length
1.5mm Panel Range
Fits into M8.5 Square Hole
Plastic
Push-Type Retainer
Toyota Camry 2006+
20mm Head Dia.
9mm Stem Length
Fits Into 9mm Square Hole
Black Nylon
Rocker Panel Clip
Toyota Corolla 97–00
OEM No. 75867-30110
M18 Head Dia.
22mm Stem Length
Fits into 9mm Hole
Black Nylon
24
KL214
*P23453*
P23453
Cowl Grille Retainer
Honda Accord 1990+
For M8 Dia. Hole
Retaining Clip
Nissan
11mm Head Dia.
13mm Stem Length
4mm Panel Thickness
Fits into 5mm Hole
Nylon
23
*P31061*
P31061
SERVICED ONLY BY
Hood Insulation Clip
Nissan Products
OEM Nos. 65832-F5000 and 65846-30F00
Honda Prelude
Cowl Panel Retainer
Nissan Trucks
Nissan OEM No. 66814-01G00
22
Bumper Retainer
Honda Accord, Odyssey and Prelude 95–99
Honda OEM No. 90108-SW3-003
14
*P15569*
P15569
KL214_Asian Fender Body Hardware Assortment
KENT AUTOMOTIVE
Asian Hood, Cowl and Trim Panel Retainers
Hood and Trunk Moulding Retaining Clip
Acura Integra and Honda Civic 94–97
12mm Head Dia.
9mm Stem Length
Fits into 6mm Hole
Black Nylon
Lexus, Toyota Camry and Solara 98–00
25mm Head Dia.
10mm Stem Length
Fits into 7mm Hole
Black Nylon
13
®
*P13794*
P13794
3
1-888-937-5368
KL211_Asian Hood, Cowl and Trim
Panel Retainers Assortment
SERVICED ONLY BY
8
Front Fender Push-Type Retainer
Nissan Maxima and 300ZX 1994+
M20 Head Dia.
Black Nylon
Push-Type Retainer
Nissan Products
Toyota Products
OEM Nos.: Nissan 80999-05N07, Toyota 90467-07043,
90467-07043-CO and 90467-07043-11
Fits in 7mm Hole
*KT11397*
KT11397
*P15599*
P15599
3.5L Sedan 1996+
Acura OEM No. 91503-SZ3-003
20mm Head Dia.
13mm Stem Length
Fits into 10mm Hole
Black Nylon
Front and Rear Bumper Push-Type Retainer
Acura Legend 1991+
Acura OEM No. 91503-SPO-0030
20mm Head Dia.
15mm Stem Length
Fits into 10mm Hole – Nylon
Screw Type Cowl Grille Rivet
Honda Accord 90–91
Mazda Vehicles
OEM Nos.: Honda 90657-SA6-0030,
GM 94198687, Mazda N304-13-356-A
7mm Hole, 14mm Washer Head
and 11mm Length
24
2
Front Bumper Drive-Type Rivet
Honda Civic 2006 and Fit 2007
Honda OEM No. 91505-S9A-003
13mm Stem Length, 6mm Panel Range
Plastic with Metal Insert
7
KENT AUTOMOTIVE
Asian Bumper Retainers
®
KL210
*KT14285*
KT14285
Anchor Clip
Honda Products
Toyota Products
OEM Nos.: Honda 90672-8110M1,
Toyota 90189-04013
Screw Grommet
Honda
OEM Nos.: Honda 90662-671-0030,
Mazda 9991-00-503, Nissan 68425-H5000
Screw Rivet
Toyota Products
Mazda Products
OEM Nos.: Toyota 90467-06017-20 and
90467-06017, Mazda 9926-50-625
Sill Plate Retainer
Honda Accord
M8 Dia.
21
*P80583*
P80583
1-888-937-5368
Grommet Nut
For Honda and General Purpose
Honda OEM Nos.: 90676-SA7-003
and 90682SB0-003
Plastic
8mm Hole, 13mm Square Head
5mm Screw Size
Hood and Trunk Insulator and Rocker Panel Trim
Drive-Type Rivet
Mercedes-Benz C, CL, CLK, E, ML and S Class, 1992+
Mercedes-Benz OEM No. 201-990-02-92
M8 Hole, 20mm Flange, 11mm Panel Range
Plastic
Bumper Fascia Push-Type Retainer
Nissan Altima 1997+
Nissan OEM No. 63848-9E001
18mm Head Dia.
22mm Stem Length
Fits into 9mm Hole
Black Nylon
pieces
*P30196*
P30196
Headlamp Bezel and Interior Screw Nut
Honda
OEM Nos.: Honda 75522-611-0000,
Mitsubishi MS-480001
Front Bumper Cover Screw Drive Rivet
Toyota Camry and Corolla 1998+
Screw Rivet
Honda Products
Nissan
OEM Nos.: Honda 90684-SA5-0030,
GM 30012018, Isuzu 8942981190,
Nissan 10998-30880
KA24
3
Screw Anchor Nut
Toyota
Nissan
Anchor Clip
Toyota Products
OEM Nos.: Toyota 90189-06042,
Honda 90661-SC7-0030, Mazda H001-50-841,
Nissan 01651-00481
13 *KT13603*
KT13603
KENT AUTOMOTIVE
Miscellaneous Asian and European Clips
KL210_Asian Bumper Retainers Assortment
*P27685*
P27685
*KT13688*
KT13688
Wheel Flare Moulding Clip with Sealer
Toyota 4Runner 2003+
17mm Head Dia.
17mm Stem Length
Orange Nylon
6
11
*P24252*
P24252
12 *KT13984*
KT13984
Front Fender Liner Push-Type Retainer
GM and Toyota 1999+
Pontiac Vibe and Lexus
Toyota Celica, Corolla, Solara and Matrix
GM OEM No. 88970767
18mm Head Dia.
7.5mm Stem Length
Fits into 7mm Hole
Black Nylon
Front Fender Liner Push-Type Retainer
Toyota Tercel 1994+
20mm Head Dia.
8mm Stem Length
Fits into 7mm Hole
Black Nylon
17
*P18348*
P18348
18
Fender Lining Screw Grommet
Toyota Solara 98–00
No. 12 Screw Size
20mm Head Dia.
22mm Stem Length
Fits into 8mm x 8mm Hole
23
*KT13602*
KT13602
*P45576*
P45576
Retainer Screw Rivet
Nissan Products 1984+
Honda Products
Mazda Products
OEM Nos.: Nissan 63878-95596, Honda
90675-SB3-003, Mazda FB01-56-964
Front Fender Pin Drive-Type Rivet
Honda Civic and Del Sol 1993+
M8 Hole Dia., 4mm Grip
Inner Fender Shield Attaching Clip
Toyota Products
Chevrolet Nova
M6
22
*KT11377*
KT11377
*KT13687*
KT13687
Rocker Moulding Clip with Sealer
Toyota 4Runner 2003+
17mm Head Dia.
10mm Stem Length
Blue Nylon
24
Front Fender Pin
Toyota Solara, Highlander, Sienna and 4Runner
2000+; Lexus GX470 2003+
15.5mm Head Dia.
25mm Stem Length
Use with KT13603
Plastic
140
pieces
5
KL100_Chrysler Body Hardware
Assortment
SERVICED ONLY BY
®
KL100
*KL100*
1
*P13790*
P13790
2
7
*P21462*
P21462
3
Door Trim Panel Retainer
8
*P38749*
P38749
Retainer
Bumper
13
KENT AUTOMOTIVE
Chrysler Body Hardware
*P18298*
P18298
Retainer Door Panel
M6.7 Hole
14
*P63794*
P63794
9
20
19
4
*P53958*
P53958
15
*P63795*
P63795
10
1-888-937-5368
*P58524M01*
P58524M01
16
*P80555*
P80555
*P21197*
P21197
6
Plastic Rivet
M6.3 Hole Dia.
11
*KL101*
*P58530*
P58530
17
*P80612*
P80612
1
*P21213*
P21213
Plastic Rivet
M6.3 Hole Dia.
12
7
18
*P63620*
P63620
8
*P38083*
P38083
14
*P63794*
P63794
9
4
*P58193*
P58193
15
*P63795*
P63795
10
PHOTOS ACTUAL SIZE
5
16
*P61999* 11
P61999
*P66152*
P66152
6
*P62445*
P62445
17
*P80653*
P80653
*P62733*
P62733
Retainer
Headlamp Adjusting Bar
to Header Panel
18
*P80658*
P80658
Drive Rivet
1" Head Dia., 1/4" Hole Dia.
23
*P33001M01*
P33001M01
12
Retainer
Plastic Shield
Hood Bumper Adjuster
22
*P21213*
P21213
Plastic Rivet
M6.3 Hole Dia.
Rivet, Block Drive
Fascia Attaching
M25 Washer Face
6mm – 8mm Shoulder
Aluminum Blind Rivet/
Steel Mandrel
Peel (Split) Type, Glass Stop
1/4" Dia., 1/2" Flange Dia.
0.520" – 0.590" Grip Range
21
1-888-937-5368
*P21197*
P21197
Plastic Rivet
M6.3 Hole Dia.
Clip, Push-In Type
1/4" x 1.22"
Window Regulator Blind Rivet
Split-Type, 1/4" Dia.
0.030" – 0.140" Grip Range
20
19
*P20681*
P20681
Rocker Moulding Retainer
20mm Overall Length
Splash Shield Clip
Aluminum/Steel Blind Rivet
Windshield Side Rail
1/8" Dia.
0.063" – 0.125" Grip Range
24
3
Aluminum Rivet
Bumper/License Plate Bracket
0.187" – 0.375" Grip Range
*P38023M01*
P38023M01
13
KENT AUTOMOTIVE
Ford Body Hardware
*P20153*
P20153
Retainer
Interior
Panel up to 30mm
Trim Panel Retainer
23
2
Fascia to Bumper Retainer
*P61978*
P61978
®
KL101
*P18332*
P18332
Weatherstrip Clip
Front and Rear Doors
Trim Panel Retainer
M7.9 Hole, M19 Head Dia.
23mm Stem Length
22
SERVICED ONLY BY
PHOTOS ACTUAL SIZE
5
Trim Panel Clip
Door and Various Interior
Applications
Steel Mandrel
0.520" – 0.590" Grip Range
21
*P20681*
P20681
20mm Overall Length
Drive-Type Rivet
M8 Hole Dia.
0.030" – 0.140" Grip Range
Retainer
Plastic Shield
*P18340*
P18340
Hood Insulation Clip
*P62445*
P62445
KL101_Ford Body Hardware
Assortment
24
145
142
pieces
KA24
KA24
KL102_General Motors Body
Hardware Assortment
SERVICED ONLY BY
*KL102*
KL102
1
*P20566*
P20566
7
*P36460M01*
P36460M01
2
8
Door Hinge Bushing
0.345" I.D. x 0.419" O.D. x 0.295"
*P62505*
P62505
*P81046M01*
P81046M01
165
180
Door Hinge Bushing
0.345" x 0.495" x 0.365"
pieces
pieces
KA24
3
*P21462*
P21462
*P38083*
P38083
9
*P50576*
P50576
14
*P62549*
P62549
15
*P81047M01*
P81047M01
*P63794*
P63794
*P52124*
P52124
16
*P63795*
P63795
5
*P28140*
P28140
11
*P55159*
P55159
6
Retaining Clip
Bumper Strip
*KL104*
17
*P80473*
P80473
Retainer, Door Trim Panel
M7 Hole Dia.
23
*P31846*
P31846
*P15544*
P15544
7
*P28296*
P28296
2
Retaining Clip
*P62445*
P62445
Retainer
Plastic Shield
18
KL104
1
Door Panel Retainer
12
4-Prong Push-In Nut
Square Head
No. 14, Nylon
Steel Mandrel
0.520" – 0.590" Grip Range
22
SERVICED ONLY BY
PHOTOS ACTUAL SIZE
0.030" – 0.140" Grip Range
21
*P26118*
P26118
1-888-937-5368
Plastic Rivet
M6.63 Hole Dia.
2.5mm – 5mm Panel Range
10
Retainer
Front Bumper Panel
M4.2 Screw Dia.
Energy Absorbing Strip
With 1/8" Shoulder
20
4
Retainer
Bumper
Splash Shield Clip
Hood Insulation
Retainer
19
*P21213*
P21213
13
Drive-Type Rivet, Fascia Retainer
M8 Hole Dia.,
M25 Washer Face
*P58940*
P58940
19
*P15600*
P15600
*P39501*
P39501
Panel Clip
Weatherstrip and Trim
14
Clip
Inner Fender Panel
M5 Hole Dia.
24
KENT AUTOMOTIVE
Nissan Body Hardware
3
*P69252*
P69252
9
*P43085*
P43085
Rivet
M5 Hole Dia., M15 Washer Head
15
Drive Rivet
Cowl Grille
M5 Square Hole
20
*P20467M01*
P20467M01
Drive-Type Rivet
Push-Type Retainer
8
Screw-Type Rivet
*P80657*
P80657
®
*P80652*
P80652
4
*P20488*
P20488
1-888-937-5368
PHOTOS ACTUAL SIZE
5
*P21640*
P21640
11
*P52221*
P52221
Drive-Type Rivet
M8 Hole Dia., M20 Washer Head
14mm Length
10
*P45576*
P45576
Screw Rivet
6
Shield Rivet, Inner Fender
M8 Hole Dia.
Anchor Clip
Drive-Type Rivet
Front and Rear Bumper Cover
*P28286*
P28286
12
*P58220*
P58220
Screw-Type Rivet
Front Bumper Face
16
17
18
22
23
24
Nut Anchor
Plastic
21
77
Door Hinge Bushing
0.380" x 0.530" x 0.365"
pieces
KL104_Nissan Body Hardware
Assortment
KENT AUTOMOTIVE
General Motors Body Hardware
Plastic Rivet
M6.3 Hole Dia.
Retainer
Splash Shield
13
®
KA24
5
pieces
6
KL213_Domestic Retainers
Assortment
SERVICED ONLY BY
®
KL213
*KL213*
1
*P15633*
P15633
2
Radiator, Wheelhouse and Fender Retainer
GM C and K Trucks 1999+
GM OEM No. 15149708
17mm Head Dia.
16mm Stem Length
Fits into 6mm Hole
Black Nylon
7
*P30881*
P30881
*P38008*
P38008
8
*P80667*
P80667
14
*P80688*
P80688
Screw-Type Rivet
Ford, GM and Chrysler
OEM Nos.: GM 20664092, Ford N804570S
Black Plastic
20
*P85037*
P85037
Fascia and General Purpose
Push-Type Retainer
GM 2007+
GM OEM No. 15296830
Chrysler OEM No. 5116530-AA
19mm Head Dia.
16mm Stem Length
Fits into 8mm Hole
Black Nylon
220
*KT13309*
KT13309
Front Air Deflector Retainer
GM OEM No. 15733971
26mm Medium Head Dia.
30mm Flange Dia.
24mm Stem Length
Use with KT13310
Black Nylon
*P15629*
P15629
4
Rear Bumper Cover Push-Type Retainer
GM OEM No. 15153415
20mm Head Dia.
21mm Stem Length
17mm Flange Dia.
Fits into 9mm Hole
Black Nylon
9
Black Plastic Drive Rivet
Ford Escort and Mercury Lynx Luggage
Compartment 1984+
Trunk Liner Retainer
Ford Taurus and Other Ford Products 1986
Mercury Sable and Other Ford Products 1986
OEM Nos.: Chrysler 6502871, Ford N803946S
and N8039465
19
3
Radiator, Fender and Wheel House
Push-Type Retainer
Fender Liner Rivet Retainer
GM Products 1984+
13
KENT AUTOMOTIVE
Domestic Retainers
*KT11706*
KT11706
*KT13123*
KT13123
Bumper Cover Pin Drive Rivet
Chrysler LH 1998+
M8.5 Hole Dia., M18 Flange Dia.
10
16
*P53958*
P53958
Fender Splash Shield Retainer
Chrysler Products
Saturn 1991+
Ford Products
OEM Nos.: Chrysler 6503598,
Saturn 21030249, Ford N807389-S
For 8mm Dia. Hole
21
*P23189*
P23189
Bumper Fascia Push-Type Retainer
Saturn 1996
Saturn OEM No. 21095797
13/16" Head Dia.
1-3/32" Stem Length
Fits into a 5/16" Hole
Black Nylon
Push-Type Retainer
1/4" Hole
15
*KT11708*
KT11708
*KT13310*
KT13310
*P53961*
P53961
PHOTOS ACTUAL SIZE
*KT13459*
KT13459
Bumper Cover and Fender Shield
Push-Type Retainer
GM and Ford 1997+
GM OEM No. 11518017
Ford OEM No. W708530-S300
20mm Head Dia.
26mm Stem Length
Fits into 8mm Hole
Black Nylon
11
17
22
*KT12792*
KT12792
*P80152*
P80152
*P80674*
P80674
Push-Type Rivet
Various Fascia Attachments Ford 1986+
Black Plastic
23 *KT12791*
KT12791
*P61999*
P61999
SERVICED ONLY BY
12
*P48897*
P48897
1
*KL221*
1
KL221
*KT12672*
KT12672
2
Rocker Panel Moulding Clip
Chevrolet Avalanche 2002+
GM OEM No. 11518357
9/16" x 13/16" Top Head Size
13/16" x 13/16" Bottom Head Size
9/16" Stem Length
Fits into 7/16" Hole
White Nylon
7
*P85244*
P85244
*KT13990*
KT13990
8
*P15546*
P15546
Retainer with Seal
Toyota Pickup Truck
Pontiac Vibe
OEM Nos.: Toyota 62955-20020, GM 94848834
15mm Head Dia.
9mm Stem Length
Fits into 8mm Hole
Nylon
150
pieces
KA24
*P85045*
P85045
Chevrolet Malibu 2004+
GM OEM No. 11589176
3/4" x 1-1/32" Top Head Size
9/16" Stem Length
Fits into 3/8" Hole
White Nylon
14
Ford Mustang 2005+
Ford OEM No. W710532-S300
M6.3 Hole, 18mm Head
43mm Stem Length
10.5mm – 37.50mm Panel Range
Plastic
19
*KT13751*
KT13751
*P20681*
P20681
3 *KT13312*
*P85297*
P85297
4
Rocker Panel Clip
Buick LeSabre, Cadillac DeVille and Seville, Oldsmobile
Aurora and Pontiac Bonneville 2000+
GM OEM No. 25722671
7/8" Width
2" Length
Gray Nylon
9
*P24225*
P24225
Buick LeSabre; Cadillac Concours, DeVille, Eldorado
and Seville; Chevrolet Impala, Lumina and Monte Carlo;
Oldsmobile Aurora; Pontiac Bonneville 1995–2000
GM OEM No. 25693852
9/16" Stem Length, Fits Into 7/16" Hole
Gray Nylon
15
*P85315*
P85315
21
*KT12669*
KT12669
Buick Rendezvous 2002+
GM OEM No. 10442914
9/16" Stem Length
White Nylon
10 *KT13754*
KT13754
3/4" Bottom Head Dia.
Ford
5
18
16
*KT13333*
KT13333
PHOTOS ACTUAL SIZE
4
*P62505*
P62505
Chrysler
6
*P52218*
P52218
*P31846*
P31846
Ford
7
Door Panel Retaining Clip
GM
8
*P59078*
P59078
GM
Door Trim Panel Clip
GM
9
*P33001M01*
P33001M01
10
*P52124*
P52124
*P80653*
P80653
24
Ford
KA13
PHOTOS ACTUAL SIZE
GM
GM
5
*P24223*
P24223
6
Chevrolet Cobalt and HHR 2005+
GM OEM No. 15221959
9/16" Width
1-1/8" Length
9/16" Stem Length
Fits into 1/2" Hole
Gray Nylon
Oldsmobile Alero and Pontiac Grand Am 1999–2000
GM OEM No. 22603384
3/4" x 1-3/16" Head Size
19/32" Stem Length
White Nylon
11
*KT13451*
KT13451
*KT13973*
KT13973
12
SERVICED ONLY BY
*P23535*
1
190
Ford
®
P23535
KENT AUTOMOTIVE
Plastic Push-In Retainers
*P33046*
P33046
2
Trim Panel Clip
Toyota
5
*P42678*
P42678
*P20118*
P20118
3
*P20566*
P20566
pieces
Rocker Moulding Clip
Pontiac Grand Prix 2004+
GM OEM No. 10323057
12mm x 20mm Top Head Size
14mm Stem Length
Fits into 9mm Hole
White Nylon
17
*P85318*
P85318
23
*P85334*
P85334
Weatherstrip Retainer Clip
GM and Chrysler
8
24
*P53964*
P53964
*P21462*
P21462
Splash Shield Retainer
Ford
Ford
11
9
*P80627*
P80627
*P28140*
P28140
Radiator Panel Retainer
GM
For 3/8" Dia. Hole
Shroud Insulating Button
GM, Ford and Chrysler
10
*P62445*
P62445
13
*P15568*
P15568
Hood Insulation Retaining Clip
Honda
6mm Hole
*P58193*
P58193
Radiator Support Retainer
GM
Rocker Panel Moulding Clip with Sealer
Nissan Altima and Maxima 2010+
Nissan OEM No. 76882-EG01A
18mm Bottom Head Size
12mm Stem Length
Fits into 8mm Hole
Black Nylon
Rocker Moulding Clip with Sealer
Hyundai Genesis and Sonata 2009+
Hyundai OEM No.: 87702-H1000
11mm x 15.5mm Top Head Size
12mm Stem Length
White Nylon
PHOTOS ACTUAL SIZE
4
7
Chevrolet Impala, Lumina and
Monte Carlo 2000
GM OEM No. 10431761
11/16" x 1-1/2" Top Head Size
7/8" x 1-9/16" Bottom Head Size
1-1/4" Stem Length
Gray Nylon
18
1-888-937-5368
Front and Rear Bumper Fascia
Ford and Chrysler
6
*P24224*
P24224
Toyota Corolla 2009+
13mm Top Head Dia.
9mm Stem Dia.
10mm Stem Length
Black Nylon
*P58190*
P58190
*P85035*
P85035
Air Distributor and Windshield
Defroster Push-Type Retainer
Buick Enclave, Chevrolet Equinox,
Chevrolet GMC S and T Trucks, GMC
Arcadia and Pontiac Torrent 2002+
GM OEM No. 11589289
18mm Head Dia.
17.5mm Stem Length
Fits into 6.5mm Hole
Black Nylon
1-888-937-5368
Rocker Panel Clip with Sealer
Hyundai Elantra and Sonata 2002+
Hyundai OEM No. 87758-3D000
14mm x 18mm Bottom Head Size
10mm Stem Length
Yellow Nylon
22
3
1-888-937-5368
P23535_Plastic Push-In Retainers
Assortment
Rocker Moulding and Grille Moulding Clip
Buick LeSabre and Rainier; Cadillac
Concourse, CTS, DeVille, Eldorado,
Escalade, Seville, SRX and STS; Chevrolet
Avalanche, Impala, Lumina, Monte Carlo,
SSR, Vans and Trucks; Oldsmobile Aurora
and Bravada and Pontiac Bonneville 1992+
GM OEM No. 25724529
9/16" x 13/16" Top Head Dia.
5/8" x 13/16" Bottom Head Dia.
9/16" Stem Length
Fits into 3/8" Hole
White Nylon
Rocker, Pillar and Fender Liner Retainer
Ford Fusion and Taurus 2009+
Ford OEM No. W706635-SSW
26mm Head Dia.
7.5mm Stem Dia.
28mm Stem Length
Black Nylon
Ford Explorer 1993+
OEM Nos.: Ford N807721-S, Chrysler 6504043
20mm Overall Length
Plastic
20
KT13312
*P38749*
P38749
Headlamp Access Panel Retainer
Pontiac Grand Prix 1988+
Oldsmobile Cutlass Supreme 1988+
Buick Regal 1988+
OEM Nos.: GM 10053182, Chrysler 6503163
8mm Hole Dia.
KENT AUTOMOTIVE
Rocker Panel Moulding Clips
Chevrolet Equinox 2005+
GM OEM No. 5480852
9/16" x 25/32" Top Head Dia.
5/8" x 13/16" Bottom Head Dia.
9/16" Stem Length
Yellow Nylon
Fender Moulding Clip with Sealer
Buick Enclave, Cadillac CTS, Chevrolet Traverse
and GMC Acadia 2003+
GM OEM No. 11569920
7.5mm x 11mm Top Head Size
15mm x 15mm Bottom Head Size
13mm Stem Length
Fits into 7mm Hole
Green Nylon
13
®
2
*P18334*
P18334
KL221_Rocker Panel Moulding
Clips Assortment
SERVICED ONLY BY
KENT AUTOMOTIVE
Hood Insulation and Door Trim Panel Clips
®
P23677
*P23677*
Door Panel Retainer (2 Parts)
General Motors B, G and H Bodies
2000+
GM OEM No. 25704141
M9 Hole Dia.
19.5mm Head Dia.
27.8mm Overall Length
Plastic
pieces
KA24
6
Fascia to Panel Retainer
Concorde, Vision, Intrepid, LHS
and New Yorker 1993+
OEM Nos.: Chrysler 6501590,
Ford N803421-S
Two Per Car
Black
Headlamp Splash Shield Screw Rivet Retainer
Ford Probe 89–92
Front Bumper Fascia Retainer
Saturn 1991+
Saturn OEM No. 21075686
For 8mm Dia. Hole
Door Panel Retainer (2 Parts)
General Motors B, G and H Bodies
2000+
GM OEM No. 25707329
M9 Hole Dia.
19.5mm Head Dia.
41mm Overall Length
Plastic
Front Air Deflector Grommet
GM OEM No. 15733970
28mm Head Dia.
13mm Stem Length
Use with KT13309
Black Nylon
1-888-937-5368
5
P23677_Hood Insulation and Door
Trim Panel Clips Assortment
KA13
Cowl Retainer
GM and Ford
12
*P20681*
P20681
*P39501*
P39501
Trim Panel Clip
Toyota and Nissan
Shroud Insulating Button
Ford and Chrysler
8mm Hole
180
pieces
KL220_Weatherstrip and Door Panel
Clips Assortment
SERVICED ONLY BY
*KL220*
1
Door Weatherstrip Retaining Clip
Lincoln Town Car 1989+
Ford
7
KENT AUTOMOTIVE
Weatherstrip and Door Panel Clips
®
KL220
*P53964*
P53964
*KT11313*
KT11313
P23679_Grip-Tite™ Rivets – Aluminum
and Plastic Assortment
2
3
*P61978*
P61978
Concorde, Vision, Intrepid, LHS and New Yorker
1993+
Chrysler OEM No. 4696129
62 Per Car
White
8
*P49831*
P49831
*P42678*
P42678
4
Weatherstrip Clip
Chevrolet Cavalier, Pontiac Sunfire 1995+
Buick Reatta 1988+
Buick Rivera 1986+
Cadillac Eldorado, Seville 1986+
OEM Nos.: GM 20699808, Chrysler 6502328
For Attaching Weatherstrip to Bottom of Door
9
*P24237*
P24237
*P24242*
P24242
1-888-937-5368
5
*KT13828*
KT13828
*P15537*
P15537
6
Honda
Honda OEM No. 90664-671-0030
7mm Wide – 16mm Long
10mm Stem Length
Fits into 5mm Hole
Nylon
Honda Accord, Civic and Odyssey 1992+
5mm x 15mm Head Size
10mm Stem Length
Fits into 6mm Hole
Orange Nylon
10
SERVICED ONLY BY
PHOTOS ACTUAL SIZE
11
*P23679*
*KT11310*
KT11310
1
KENT AUTOMOTIVE
Grip-Tite™ Rivets – Aluminum and Plastic
®
P23679
2
*P49030M01*
P49030M01
1/8" Rivet
Aluminum Mandrel
1/16" – 1/8" Grip Range
Dome Head
Nissan Altima and Sentra 1994+
M12 Stem
M6 Hole Dia.
Blue Nylon
5
12
*P61558M01*
P61558M01
1-888-937-5368
PHOTOS ACTUAL SIZE
3
4
*P21197*
P21197
3/16" Rivet
Aluminum Mandrel
1/2" – 5/8" Grip Range
Large Dome Head
6
*P61799M01*
P61799M01
*P49055M01*
P49055M01
7
1/4" Nylon Rivet
5/32" – 3/8" (4mm – 10mm) Grip Range
1/2" (12mm) Head Dia.
8
Honda Odyssey 1995+
Honda OEM No. 91568-SR2-003
10mm Stem Length
Fits into a 5mm Hole
Green Nylon
Honda Odyssey
10mm Stem Length
13
*P13788*
P13788
14
*P31846*
P31846
Buick Century and Regal 1983+
Oldsmobile Cutlass 1983+
GM OEM Nos. 10073833, 15600382
and 20421800
Ford Windstar 1995+
Ford OEM No. F58Z-16237A02-A
19
*P30151*
P30151
Interior Door Trim Panel Retainer
Toyota Products
Mazda Products
OEM Nos.: Toyota 67771-12010, Isuzu 8942264920,
Mazda 9927-40-825
345
20
*KT13291*
KT13291
Jeep Liberty 2002+
16mm Top Head Dia.
15mm Stem Length
9mm Stem Dia.
White Nylon
Ford Explorer 2005+
Not Available from OEM
6.5mm Stem Dia.
10mm Stem Length
Blue Nylon
Ford F-150 1999–2000
Ford OEM No. N806340-S
M5 Stem Dia., 8mm Stem Length
Natural Nylon
15 *P52124*
P52124
16
Buick Century, LeSabre, Skylark 82–85
Chevrolet Celebrity, Impala, Camaro, Malibu,
Chevette, Citation 82–85
Oldsmobile Ciera 88, Cutlass 82–85
Pontiac 6000, Parisienne, Firebird, Bonneville,
T1000 82–85
GM OEM No. 3065575
21
*P13790*
P13790
*P15547*
P15547
Door Trim Retainer
Toyota Corolla 1990+
18mm Head Dia.
13mm Stem Length
21mm Overall Length
Fits into 8mm Hole
Nylon
22
Caravan, Cirrus, Neon, Stratus and Voyager 1995+
Jeep and Dodge Trucks 1993+
Chrysler OEM Nos. 6502907, 6504014
Fits 7mm Hole
15mm Stem Length
*P80473*
P80473
GM C and K Trucks 1995
GM OEM No. 15960325
Plastic, 6.5mm Hole
1/8" Rivet
Aluminum Mandrel
Dome Head
17
*P85148*
P85148
23
*P18340*
P18340
*P80653*
P80653
9
1
®
2
Clip, Door Trim Panel
Ford 1981+
Ford OEM No. N801925-S
24
11
*P51825*
P51825
6
12
*P49050M01*
P49050M01
KA13
*P62934M01*
P62934M01
14
13
3/16" Rivet
Aluminum Mandrel
Dome Head
*P26118*
P26118
*P21239*
P21239
3/16" Nylon Rivet
1/8" – 1/4" (3mm – 6mm) Grip Range
1/4" Nylon Rivet
3/32" – 3/16" (2.5mm – 5mm) Grip Range
300
pieces
KL212_Specialty Rivets No. 2
Assortment
3
*P69906*
P69906
3/16" Rivet
Aluminum Mandrel
Dome Head
3/16" Rivet
Aluminum Mandrel
Dome Head
1-888-937-5368
SERVICED ONLY BY
PHOTOS ACTUAL SIZE
*KL212*
4
1
KENT AUTOMOTIVE
Specialty Rivets No. 2
®
KL212
*P21197*
P21197
2
*P21213*
P21213
Grip-Tite™ Rivet
OEM Nos. Ford N803862-S, GM 10184895 and
20452072, Chrysler 6501559
1/4" (6.3mm) Dia.
5/32" – 3/8" (4mm – 10mm) Grip Range
M5 x 0.8
Hex Nut with 19mm Free Spinning Washer
10mm Across the Flats Hex
5
*P61627M01*
P61627M01
1/4" Nylon Rivet
5/32" – 3/8" (4mm – 10mm) Grip Range
11/16" (17mm) Head Dia.
KENT AUTOMOTIVE
Metric Flange/Cage Nuts
*P60490*
P60490
10
1/8" Rivet
Aluminum Mandrel
Dome Head
P23680_Metric Flange/Cage
Nuts Assortment
SERVICED ONLY BY
*P23680*
P23680
3/16" Rivet
Aluminum Mandrel
Large Dome Head
*P49040M01*
P49040M01
Chrysler Vans 1998+
Chrysler OEM No. 6505292AA
15mm Top Head Dia.
9mm Stem Dia.
15mm Stem Length
Natural Nylon
pieces
KA24
18
Door Trim Panel Retainer with Sealer
Lexus ES 350, GX 470, IS 250, IS 350, IS F,
LS 460 and LS 600HL 2001+
Toyota Camry, FJ Cruiser, Highlander, RAV4
and 4Runner 2001+
13mm Top Head Dia.
8.5mm Stem Dia.
14mm Stem Length
White Nylon
*P21213*
P21213
7
6
*P26088*
P26088
Plastic Rivet
1/4" (6.3mm) Dia.
11/16" Head Dia.
5/32" – 3/8" (4mm – 10mm) Grip Range
7
*P26118*
P26118
3
*P21239*
P21239
Grip-Tite™ Rivet
OEM Nos.: GM 20432975, Chrysler 6503800,
Volkswagen 175-853-57701C
3/16" (5mm) Dia.
1/8" – 1/4" (3mm – 6mm) Grip Range
8
*P86101*
P86101
1-888-937-5368
PHOTOS ACTUAL SIZE
4
*KT12808*
KT12808
5
Windshield, Side and Deck Moulding – Blind Rivet
Lexus GS300, 400, 430 and SC430 1998+
M4 Hole Dia.
M3.2 Rivet Dia.
8mm Flange Dia.
Aluminum Rivet with Steel Mandrel and Plastic Seal
9
*P85106*
P85106
*P21267*
P21267
Grip-Tite™ Rivet
3/16" (5mm) Dia.
1/4" – 3/8" (6mm – 10mm) Grip Range
10
*P27721*
P27721
8
M6 x 1.0
10mm Across the Flats Hex
9
*P57197*
P57197
M8 x 1.25
10
*P57192*
P57192
11
*P37485*
P37485
11
12
*P57195*
P57195
160
pieces
KA13
6mm
Metric Cage Nut
8mm
Metric Cage Nut
13
*P57189M01*
P57189M01
8mm
Metric Cage Nut
M10 x 1.5
14
*KT12807*
KT12807
Mouldings – Blind Rivet
Toyota Landcruiser 1998+
M4 Hole Dia.
M3.2 Rivet Dia.
8mm Flange Dia.
Black Aluminum Rivet with Steel Mandrel and
Plastic Seal
15
6mm
Metric Cage Nut
Plastic Rivet
GM and Volkswagen
OEM Nos.: Volkswagen
175-853-577A, GM 20433026
1/4" (6.3mm) Dia.
M6.63 Hole Dia.
3/32" – 3/16" (2.5mm – 5mm) Grip Range
Grip-Tite™ Rivet
GM OEM No. 15955172
1/4" (6.3mm) Dia.
3/32" – 3/16" (2.5mm – 5mm) Grip Range
16
*P57200*
P57200
*P91110*
P91110
Windshield Rivet with Plastic Cap
Lexus IS 250, IS 350 and IS F 2006+
Toyota 2002+
3.2mm (1/8") Dia.
6.3mm (1/4") Nylon Shoulder Dia.
.8mm – 1.5mm (1/32" – 1/16") Grip
10.3mm (13/32") Nylon Flange Dia.
Aluminum Rivet
Steel Mandrel
10mm
Metric Cage Nut
7
KA20
12
*KT13832*
KT13832
Windshield Side Moulding and Gas Filler Cap
Specialty Rivet
Toyota Camry and Sienna 1997+
3/16" (5mm) Dia., 9/16" (14mm) Flange Dia.
1/8" – 5/16" (3mm – 8mm) Grip Range
Aluminum Rivet with Plastic Cap and Steel Mandrel
13
Gas Filler Door Rivet
Toyota Camry and Lexus IS300 2001+
3/16" (4.8mm) Dia.
1/16" – 1/4" (1.6mm – 6.35mm) Grip Range
9/16" (14mm) Flange Dia.
Aluminum Rivet with Plastic Cap
Steel Mandrel
17
*P68087*
P68087
Wheel House Moulding Rivet
Ford
OEM Nos.: GM 25618730, Ford N805592-S100
3/16" Dia.
Special Black Finish
*KT11351*
KT11351
Specialty Rivet with Plastic Cap
Lexus 2004+
Lexus OEM No. 90269-05065
5mm (3/16") Dia.
4mm – 7mm (5/32" – 9/32") Grip
13mm (1/2") Flange Dia.
Bumpers and General Purpose
Aluminum Rivet with Plastic Cap, Steel Mandrel
14
*P13787*
P13787
Wheel Opening Rivet
Lincoln 1994+
Ford OEM No. N807620-S100
15
19
*KT13527*
KT13527
Front Bumper, Trim Panel, Instrument Panel and
Running Boards Split-Type Rivet
Chrysler 1999+
5/32" Dia.
3/64" – 1/4" Grip Range
7/16" Flange Dia.
Aluminum Rivet (Black) with Aluminum Mandrel
*KT13762*
KT13762
Specialty Rivet
Lexus 1998+
General Purpose
3.2mm (1/8") Dia.
1.2mm – 4mm (3/64" – 5/32") Grip Range
Steel Mandrel
Door Window Moulding Rivet
Toyota Camry 1997+
4mm Dia.
1.6mm – 6.3mm Grip Range
8mm Flange
Aluminum/Aluminum
Closed End Sealing-Type Aluminum Rivet
and Mandrel
Toyota Camry 1997+
M5 Dia., M9.5 Flange Dia.
18
*KT12673*
KT12673
Grip-Tite™ Rivet
3/16" (5mm) Dia.
1/8" – 3/16" (3mm – 4.5mm) Grip Range
20
*KT13763*
KT13763
Specialty Rivet
Lexus 1998+
General Purpose
3.2mm (1/8") Dia.
1.2mm – 3.4mm (3/64" – 1/8") Grip Range
Steel Mandrel
200
pieces
8
P23619_Plastic Screw and Push
Rivets Assortment
SERVICED ONLY BY
*P23619*
1
KENT AUTOMOTIVE
Plastic Screw and Push Rivets
®
P23619
2
*P15599*
P15599
Fits into 10mm Hole
5
*P53958*
P53958
1-888-937-5368
SERVICED ONLY BY
*P23678*
PHOTOS ACTUAL SIZE
3
4
1
7
8
5
KENT AUTOMOTIVE
Special Rivets
®
P23678
2
*P61855*
P61855
3
1-888-937-5368
PHOTOS ACTUAL SIZE
4
*P63795*
P63795
*P65619*
P65619
Fender Splash Shield Retainer
For 8mm Hole
6
*P23263*
P23263
Toyota
Fits into 9mm Hole
9
P23678_Special Rivets Assortment
*P62549*
P62549
1/4" Dia.
Door Handle Rivet
3/16" Dia.
Luggage Rack Closed-End
Aluminum Rivet with Mandrel
Front and Rear Bumper Strip Rivet
GM
10
*P68167*
P68167
*P38083*
P38083
6
*P58508*
P58508
11
*P28286*
P28286
12
7
*P80658*
P80658
*P20153*
P20153
1/4" Dia.
Window Regulator Rivet
8
*P42795*
P42795
*P68087*
P68087
1/4" Dia.
Aluminum Specialty Rivet
Ford and Chrysler
1/4" Dia.
Door Lock Actuator Assembly
11
Bumper Fascia Screw Retainer
Honda
13
14
*P26070*
P26070
135
pieces
KA13
Splash Shield Liner Retainer
GM and Ford
Rivet Retainer
GM
*P80657*
P80657
Fender Shield Retainer Rivet
Nissan
15
Front Fascia Retainer
GM
*P45576*
P45576
5/32" Dia.
Wheel House Opening and Grille Rivet
Drive Rivet Retainer
GM and Ford
9
16
1/8" Dia.
Windshield Side Rail Rivet
Retainer Screw Rivet
Honda, Nissan and Mazda
KA13
®
2
3
*P35112*
P35112
3/16" Dia.
Grille Rivet, Grille Attaching
1/4" Dia.
Door Handle Rivet
1/4" Dia.
Window Regulator Rivet
1-888-937-5368
SERVICED ONLY BY
*P23621*
PHOTOS ACTUAL SIZE
4
*P35313*
P35313
P23621
1
*P1054*
P1054
7
*P51266M01*
P51266M01
13
*P21245M01*
P21245M01
®
KENT AUTOMOTIVE
Speed Nuts
2
3
8
9
14
15
4
1-888-937-5368
PHOTOS ACTUAL SIZE
5
6
M10 x 1.5 x 40mm
Hex Head Body Bolt
with 28mm Captive Washer
M8 x 1.25 x 25mm
Hex Washer Head Body Bolt
*P59729*
P59729
6
*P65537*
P65537
7
*P60645*
P60645
8
9
*P59732*
P59732
M8 x 1.25 x 30mm
Hex Head Body Bolt
with 22mm Captive Washer, 10mm Hex
M6 x 1.0 x 25mm
Hex Head Body Bolt
10
*P57099*
P57099
11
*P35201*
P35201
pieces
KA13
M6 x 1.0 x 25mm
Hex Head Body Bolt
M6 x 1.0 x 23mm
Hex Head Body Bolt
10
*P59798*
P59798
11
*P56390*
P56390
12
*P32351*
P32351
M6 Push-Tite Retainer
*P69846*
P69846
16
*P69856*
P69856
17
*P21752*
P21752
1/2" Push-Tite Bolt Retainer
18
*P21626*
P21626
M8 x 1.25 x 30mm
Hex Head Body Bolt
Self Threading Nut
3/16" Stud Size
5/8" Washer O.D.
12
19
160
*P42999*
P42999
*P34832*
P34832
M6 x 1.0 x 25mm
Hex Head Body Bolt
*P2452*
P2452
GM, Ford and Toyota
Window Handle and
Inside Door Retainer
Push-On Type
1/8" Flat Nut
5
180
pieces
P23621_Speed Nuts Assortment
KENT AUTOMOTIVE
Metric Hex Head Body Bolts
1
*P63794*
P63794
*P57515*
P57515
P23682_Metric Hex Head Body Bolts Assortment
SERVICED ONLY BY
*P23682*
P23682
10
*P63620*
P63620
12
*P66034*
P66034
3/16" Dia.
Wheel House Moulding Rivet
M8 x 1.25 x 25mm
Hex Head Body Bolt
Thread Cutting Nut
5mm Stud Size
15mm Washer O.D.
20
*P54671*
P54671
#8 Spring Type “U” Nut
KA24
21
*P23271*
P23271
Self Threading Nut
6.3mm Stud Size
18mm Washer O.D.
22
*P31675M01*
P31675M01
Self Threading Nut
1/4" Stud Size
11/16" Washer O.D.
Self Threading Nut
5/16" Stud Size
23
*P2594*
P2594
1/4"–20 “U” Nut
24
*P54677*
P54677
415
pieces
P23625_Plastic Nuts Assortment
SERVICED ONLY BY
*P23625*
KENT AUTOMOTIVE
Plastic Nuts
®
P23625
1
P23623_Trim Screws Assortment
2
3
4
8
9
10
1-888-937-5368
SERVICED ONLY BY
PHOTOS ACTUAL SIZE
5
*P23623*
6
1
®
P23623
*P65945M01*
P65945M01
KENT AUTOMOTIVE
Trim Screws
2
3
4
No. 8 x 1"
Phillips Oval Head Tapping Screw
7
*P59546M01*
P59546M01
Header Panel and Head Lamp
Mounting Nut
GM
13
*P26455*
P26455
Anchor Clip
Honda and Toyota
14
*P28855*
P28855
Headlamp Bezel and Radiator
Grille Nut
GM
19
*P30216M01*
P30216M01
15
Headlamp and Grille Nut
For No. 8 Screw
GM
20
*P42500*
P42500
Nylon Nut
No. 6 Screw Size
Fits 6mm x 6mm Hole
Honda
295
16
*P39511*
P39511
Headlamp Bezel Nut
Toyota and Mitsubishi
21
Side Marker Lamp Nut
Ford
pieces
KA24
11
*P20746*
P20746
Anchor Clip
Honda, Toyota, Nissan and Mazda
17
*P80652*
P80652
Nylon Nut
Honda, Toyota, Nissan and Mazda
22
*P31825*
P31825
Headlamp Rim and Grille
Mounting Nut
Ford
12
*P21640*
P21640
Headlamp Rim Mounting Nut
GM, Chrysler and VW
24
*P65320*
P65320
License Plate Nut
For 3/8" Hole, 1/4" Screw
GM
*P65940M01*
P65940M01
13
*P32301*
P32301
*KL185*
1
*P27606*
P27606
2
Phillips Round Washer Head
No. 8 (M4.2) x 1/2
6
*P50771*
P50771
*P30411*
P30411
No. 8 (M4.2) x 3/4
7
*P50774*
P50774
Phillips Oval Head
No. 8 (M4.2) x 3/4
11
*P53303*
P53303
*P53306*
P53306
*KT11659*
KT11659
1,100
Phillips Flat Washer Head
Drill Point Screw
M4.2 x 0.79 x 15mm
pieces
KA20
*KT11419*
KT11419
Round Head Drill Point
Pozidriv® Screw
11mm Washer Head
M4.2 x 1.41 x 16mm
With Biwax
4
*P27586*
P27586
KA24
*P53309*
P53309
Phillips Washer Faced
No. 8 (M4.2) x 3/4
18
*KT11324*
KT11324
*P30386*
P30386
*KL186*
1
KL186
*P80611*
P80611
2
Phillips Pan Head
No. 6 x 3/8
10
7
*P30406*
P30406
Phillips Oval Head with
Countersunk Washer
No. 8 (M4.2) x 1-1/4
15
No. 8 (M4.2) x 1
19
*P60132*
P60132
*P32260*
P32260
10
No. 8 x 1-1/4"
15
*P64003M01*
P64003M01
No. 8 x 1"
21
*P49121*
P49121
No. 8 x 3/4"
*P31515*
P31515
PHOTOS ACTUAL SIZE
11
M4.2 x 20mm
Phillips Washer Faced Screw
16
*P30411*
P30411
*P27606*
P27606
6
*P42535*
P42535
*P58130*
P58130
12
*P59114*
P59114
*P42520*
P42520
No. 8 x 3/4"
24
*P42525*
P42525
415
M4.2 x 20mm
Hex Head Sheet Metal Screw
with 12mm Washer
No. 8 x 1/2"
Phillips Round Washer Head Screw
*P42515*
P42515
No. 8 x 1/2"
18
M4.2 x 20mm
with 16mm Washer
23
*P38617*
P38617
M6.3 x 25mm
with 17mm Washer
No. 10 x 3/4"
17
No. 8 x 3/4"
Phillips Round Washer Head Screw
22
*P51801*
P51801
M6.3 x 20mm
Hex Washer Head
with 17mm Free Spinning Washer
SERVICED ONLY BY
5
Countersunk Washer
No. 8 (M4.2) x 1
14
No. 8 x 3/4"
Phillips Pan Head Tapping Screw
9
1-888-937-5368
5
No. 8 x 1"
pieces
KL186_Phillips Pan Head and Hex Washer
Head Drill Point Screws Assortment
PHOTOS ACTUAL SIZE
*P30401*
P30401
*P42187*
P42187
No. 8 x 1/2"
1-888-937-5368
*P30421*
P30421
No. 8 x 1"
20
19
No. 8 (M4.2) x 1-1/4
9
Countersunk Washer
No. 8 (M4.2) x 3/4
13
No. 8 (M4.2) x 5/8
17
*P30416*
P30416
No. 8 (M4.2) x 1
8
Phillips Oval Head
No. 8 (M4.2) x 1
12
No. 8 (M4.2) x 1/2
16
3
*P42197*
P42197
14
License Plate Nut, 1/4" Screw
GM and Chrysler
KENT AUTOMOTIVE
Drill Point Trim Screws with Special Black Finish
®
KL185
8
No. 8 x 7/16"
Phillips Washer Head Screw
Drill Point
*P55159*
P55159
KL185_Drill Point Trim Screws with
Special Black Finish Assortment
SERVICED ONLY BY
M5 x 18mm
Phillips Truss Head
No. 8 x 3/4"
*P27685*
P27685
Inner Fender Shield
Attaching Clip
Toyota
Grille Screw Grommet
GM
23
*P21687M01*
P21687M01
7
Screw Grommet
Toyota, Nissan and Mitsubishi
18
*P26065M01*
P26065M01
*P49191*
P49191
*P46197*
P46197
*P31145*
P31145
No. 8 (M4.2) x 1-1/4
*P31165*
P31165
19
TEK® Point
Pozidriv® Screw
11mm Round Washer Head
M4.2 x 1.41 x 25mm
Universal
*P80726*
P80726
Hex Washer Head
No. 10 x 1/2
(5/16" Across Flats)
KA24
9
*P80616*
P80616
3
*P31150*
P31150
*P80716*
P80716
*P80731*
P80731
Hex Washer Head
No. 10 x 3/4
4
*P80636*
P80636
*P80721*
P80721
*P31185*
P31185
Hex Washer Head
No. 10 x 1
5
*P80641*
P80641
*P31170*
P31170
*P31190*
P31190
Hex Washer Head
No. 10 x 1-1/4
*P80631*
P80631
PHOTOS ACTUAL SIZE
6
*P31155*
P31155
*P31175*
P31175
*P31195*
P31195
*P31160*
P31160
Phillips Pan Head
No. 10 x 1-1/4
18
Hex Washer Head
No. 8 x 1-1/4
(1/4" Across Flats)
23
*P31140*
P31140
Phillips Pan Head
No. 8 x 1
12
Phillips Pan Head
No. 10 x 1
17
Hex Washer Head
No. 8 x 1
(1/4" Across Flats)
22
1-888-937-5368
Phillips Pan Head
No. 8 x 3/4
11
Phillips Pan Head
No. 10 x 3/4
16
Hex Washer Head
No. 8 x 3/4
(1/4" Across Flats)
21
*P80626*
P80626
Phillips Pan Head
No. 8 x 1/2
10
Phillips Pan Head
No. 10 x 1/2
15
Hex Washer Head
No. 8 x 1/2
(1/4" Across Flats)
20
*P80621*
P80621
Phillips Pan Head
No. 8 x 7/16
9
Phillips Pan Head
No. 8 x 1-1/2
14
Phillips Pan Head
No. 10 x 1-1/2
20
KENT AUTOMOTIVE
Phillips Pan Head and Hex Washer Head Drill Point Screws
Phillips Pan Head
No. 6 x 1/2
8
Phillips Pan Head
No. 8 x 1-1/4
13
*P30391*
P30391
®
*P31180*
P31180
Hex Washer Head
No. 8 x 1-1/2
(1/4" Across Flats)
24
Hex Washer Head
No. 10 x 1-1/2
1,150
pieces
10
KL123_Self-Tapping Screws Assortment
SERVICED ONLY BY
*KL123*
1
®
KL123
KENT AUTOMOTIVE
Self-Tapping Screws
2
*P46222*
P46222
Phillips Indented Hex Head with Washer
M5 x 16
16mm Washer
5
PHOTOS ACTUAL SIZE
3
4
6
M6 x 20
16mm Washer
*P65552*
P65552
7
with 24mm Washer
M6.3 x 20
10
*P46232*
P46232
M6 x 20
20mm Washer
*P46217*
P46217
*P62003*
P62003
11
*P80731*
P80731
• 3/4" x 66'
• 7 mil thick
• 600V
• Meets ASTM and CSA standards; UL listed
• Includes 15 rolls (Part No. 9092) electrical tape
and the gravity-fed dispenser.
*P46192*
P46192
Phillips Truss Head
M5 x 14
12
Drill Point Hex Washer Head
Dia. No. 10
5/16" Across Flats
3/4" Length
pieces
KA13
8
Self-Drilling Hex Head Screw
with 12mm Washer
M4.2 x 16
Indented Hex Head with Washer
M6.3 x 18
22mm Washer
Special Gold Finish
600
*P13770*
P13770
Phillips Truss Head
Nissan Bumpers
M4.8 x 1.6 x 15mm
14mm Head O.D.
Phosphate Finish
Indented Hex Head with Washer
M6 x 20
20mm Washer
Special Gold Finish
*P46227*
P46227
9
*P46212*
P46212
*P13791*
P13791
Phillips Truss Head
Japanese Imports
M6.3 x 1.81 x 16mm
15mm Head O.D.
P24686_Miniature Bulbs Assortment
SERVICED ONLY BY
*P24686*
1
P24686
®
2
*P22266*
P22266
*P28651*
P28651
*P22162*
P22162
7
*P28626*
P28626
11
*P22171*
P22171
1156
Clear
10
4
14
55
pieces
KA13
*P24296*
*P61546*
P61546
12
*P61536*
P61536
2057
Clear
15
*P22166*
P22166
1157
Clear
P24296
1
*P28731M01*
P28731M01
7
*P28751M01*
P28751M01
13
*P28746M01*
P28746M01
19
*P28741M01*
P28741M01
8
*P28736M01*
P28736M01
14
*P28726M01*
P28726M01
20
*P54608M01*
P54608M01
16
*P61551*
P61551
ATO 3A
Violet
3156
Clear
KA24
3
*P65995M01*
P65995M01
9
*P52364M01*
P52364M01
15
*P65972M01*
P65972M01
ATO 30A
Light Green
ATO 15A
Light Blue
PHOTOS ACTUAL SIZE
5
6
*P65692M01*
P65692M01
11
12
*P65678M01*
P65678M01
17
18
*P65677M01*
P65677M01
24
*P65673M01*
P65673M01
Maxi-Fuse® 60A
Blue
10
*P52370M01*
P52370M01
16
*P52367M01*
P52367M01
22
*P66002M01*
P66002M01
Mini-Fuse® 7.5A
Brown
ATO 20A
Yellow
4
1-888-937-5368
Mini-Fuse® 10A
Red
ATO 25A
Natural
ATO 5A
Tan
3157
Clear
KENT AUTOMOTIVE
Automotive Fuses
*P54611M01*
P54611M01
ATO 7.5A
Brown
3157-NA
Amber
®
2
ATO 10A
Red
8
1157-NA
Amber
13
SERVICED ONLY BY
PHOTOS ACTUAL SIZE
2057-NA
Amber
6
194
Clear
9
1-888-937-5368
3
194-NA
Amber
5
P24296_Automotive Fuses Assortment
KENT AUTOMOTIVE
Miniature Bulbs
*P66013*
P66013
kit
LP861
Electrical Tape Assortment
1-888-937-5368
Mini-Fuse® 25A
Natural
Mini-Fuse® 5A
Tan
21
Maxi-Fuse® 50A
Red
Mini-Fuse® 20A
Yellow
Mini-Fuse® 15A
Blue
Maxi-Fuse® 40A
Orange
23
*P65668M01*
P65668M01
Maxi-Fuse® 20A
Yellow
80
Maxi-Fuse® 30A
Green
pieces
KL216_Asian and European
Miniature Bulbs Assortment
SERVICED ONLY BY
KENT AUTOMOTIVE
Asian and European Miniature Bulbs
®
KL216
*KL216*
1
*KT11902*
KT11902
6
*P22261*
P22261
11
*KT13247*
KT13247
2
*P22266*
P22266
7
*P50656*
P50656
Industry No. 7440
Wedge
95
KA20
Industry No. 1156
Single Contact Bayonet/Brass
*P22171*
P22171
8
*P61524*
P61524
13
*P64930*
P64930
*KT11900*
KT11900
18
*P66028*
P66028
Industry No. 6418
Cartridge/Nickel
SERVICED ONLY BY
*KL215*
5
Industry No. 3496
Double Contact Index Bayonet/Nickel
9
*KT11903*
KT11903
14
*P45216*
P45216
1
*KT13246*
KT13246
Industry No. 7225
Double Contact Bayonet/Nickel
19
6
*P66013*
P66013
11
*P28626*
P28626
1
P24300
®
16
2
18–14 Ga.
Male Fully Encapsulated
Polyvinyl Quick Slide, 1/4"
Blue
5
*P32611*
P32611
*P41932M01*
P41932M01
3
KA20
Industry No. 194
Wedge
*P23182*
P23182
*P50662*
P50662
13
*KT11923*
KT11923
*P66017*
P66017
9
*P61524*
P61524
14
*P68282*
P68282
Industry No. 4157LL
Double Contact Wedge
*P61518*
P61518
15
*P28651*
P28651
Industry No. 912
Wedge
Industry No. 3357NA/3457NA
19
*KT13244*
KT13244
10
Industry No. 921
Wedge
Industry No. 922
Wedge
18
5
Industry No. 916
Wedge
Industry No. 916NA
Wedge
Industry No. 89
17
*P22197*
P22197
4
Industry No. 3157
8
Industry No. 3157NA
12
*P61536*
P61536
Industry No. 2057NA
Double Contact Index Bayonet/Brass
20
85
SERVICED ONLY BY
1-888-937-5368
*KL128*
PHOTOS ACTUAL SIZE
*P52151*
P52151
pieces
KL128_Self-Locking Wire
Ties – Black Assortment
4
*P60451*
P60451
KL128
®
KENT AUTOMOTIVE
Self-Locking Wire Ties – Black
1
*P60419*
P60419
2
*P60435*
P60435
3
*P60451*
P60451
4
*KT13409*
KT13409
1-888-937-5368
PHOTOS ACTUAL SIZE
4" Length
18–14 Ga.
Female Fully Encapsulated
Polyvinyl Quick Slide, 1/4"
Blue
6
*P61546*
P61546
3
1-888-937-5368
Industrial No. 67
KENT AUTOMOTIVE
Electrical
*P41916M01*
P41916M01
7
Industry No. 2057
Industry No. 7506
Single Contact Bayonet/Nickel
20
P24300_Electrical Assortment
*P24300*
*P22266*
P22266
Industry No. 194A
Wedge
*P45111*
P45111
Industry No. 24NA
Wedge
SERVICED ONLY BY
2
Industry No. 4157NA/LL
*P22166*
P22166
Industry No. 1157
15
KENT AUTOMOTIVE
Domestic Miniature Bulbs
®
KL215
*KT13245*
KT13245
Industry No. 7440NA
Wedge
10
Industry No. 7443
Wedge
Industry No. 24
Wedge
Industry No. 6411
Cartridge/Nickel
1-888-937-5368
*KT11894*
KT11894
Industry No. 921
Wedge
Industry No. 1157NA
17
*KT11901*
KT11901
4
*P22162*
P22162
Industry No. 1156NA
12
Industry No. 7443NA
Wedge
pieces
3
Industry No. 194
Wedge
Industry No. 168
Wedge
16
KL215_Domestic Miniature Bulbs
Assortment
*P65386*
P65386
5-1/2" Length
12–10 Ga.
Polyvinyl Butt Splice
Yellow
7
*P32606*
P32606
12–10 Ga.
Visa Crimp™ Heat Shrink Butt Splice
Yellow
8
*P65378*
P65378
7/16" – 1/2"
Harness Wrap Rosebud Clip
9
7-1/2" Length
*P52154M01*
P52154M01
11-3/4" Length
5
16–14 Ga.
Blue
10
*P32601*
P32601
16–14 Ga.
Blue
11
*P65347*
P65347
6
750
pieces
KA13
22–18 Ga.
Red
22–18 Ga.
Red
3/4"
Harness Wrap Kit Rosebud Clip
*P60477*
P60477
7-1/2"
Self-Locking Wire Tie
Black
750
14-1/2" Length
KA6H
11
pieces
12
LP281_Heavy-Duty Vinyl-Coated
Cable Camps, Small Dia.
LP408_Wire Connectors
LP408
Wire Connectors
Heavy-Duty Vinyl-Coated Cable Clamps, Small Dia.
1.866.529.7664 www.lawsonproducts.com
*95049*
95049
*87669*
87669
*87668*
87668
*87667*
87667
*88957*
88957
*17009*
17009
*17011*
17011
Winged 600V
12–6 Ga., Blue
Winged 600V
14–8 Ga., Gray
Winged 600V
18–10 Ga., Red
Winged 600V
18–10 Ga.
Yellow
Winged 600V
Grounding
14–10 Ga.
Green
5/8 I.D.
Industry No. 10
3/4 I.D.
Industry No. 12
*25006*
25006
*25004*
25004
*25001*
25001
*17006*
17006
*17007*
17007
*17008*
17008
Standard Temperature 600V
14–8 Ga., Red
18–12 Ga., Yellow
22–14 Ga., Orange
7/16 I.D.
Industry No. 7
1/2 I.D.
Industry No. 8
9/16 I.D.
Industry No. 9
*17003*
17003
*17004*
17004
*17005*
17005
5/16 I.D.
Industry No. 5
3/8 I.D.
Industry No. 6
*53656*
53656
*53655*
53655
*53654*
53654
*87747*
87747
*89563*
89563
3M™ Performance Plus
Wire Spring Grip 600V
14–6 Ga., Blue/Gray
18–8 Ga., Red/Yellow
22–12 Ga., Orange/Blue
22–14 Ga., Blue
22–16 Ga., Gray
410
A17
LP281
$9899
Serviced only by
PHOTOS ACTUAL SIZE
®
© 2010 Lawson Products, Inc. Printed in USA (1/10)
1/4 I.D.
Industry No. 4
A17
160
Serviced only by
PHOTOS NOT ACTUAL SIZE
®
pieces
pieces
P7372_Clear-Seal™ Heat Shrink
Tubing Assortment
SERVICED ONLY BY
*P7372*
P7372
®
KENT AUTOMOTIVE
Clear-Seal™ Heat Shrink Tubing
1
*P29925*
P29925
2
*P29930*
P29930
KL118_Visa Crimp™ Heat Shrink
Terminals Assortment
1-888-937-5368
SERVICED ONLY BY
*KL118*
PHOTOS ACTUAL SIZE
1
KL118
*P65347*
P65347
2
®
KENT AUTOMOTIVE
Visa Crimp™ Heat Shrink Terminals
*P50441*
P50441
3
*P50904*
P50904
4
1-888-937-5368
PHOTOS ACTUAL SIZE
5
6
1/8" I.D.
3/16" I.D.
3
22–18 Wire
2–4–6 Stud
Ring Terminal – Red
22–18 Wire
Butt Connector – Red
7
*P65378*
P65378
8
*P50498*
P50498
22–18 Wire
8 Stud
Spade Flange – Red
9
*P50913*
P50913
10
*P50916*
P50916
11
*P50989*
P50989
12
*P51273*
P51273
*P25290*
P25290
4
16–14 Wire
6–8–10 Stud
Ring Terminal – Blue
16–14 Wire
Butt Connector – Blue
1/4" I.D.
*P25295*
P25295
13
*P65386*
P65386
14
*P50510*
P50510
16–14 Wire
8 Stud
Spade Flange – Blue
15
*P50931*
P50931
16–14 Wire
1/4" Blade
Male Fully Encapsulated
Quick Slide – Blue
16–14 Wire
10 Stud
Spade Flange – Blue
16
17
*P50991*
P50991
16–14 Wire
1/4" Blade
Male Quick Disconnect
Blue
18
*P51279*
P51279
3/8" I.D.
5
12–10 Wire
6–8–10 Stud
Ring Terminal – Yellow
12–10 Wire
Butt Connector – Yellow
19
*P51369*
P51369
20
16–14 Wire
1/4" Blade
Female Fully Encapsulated
Quick Slide – Blue
12–10 Wire
1/4" Stud
Spade Flange – Yellow
21
22
23
16–14 Wire
1/4" Blade
Female Quick Disconnect
Blue
24
6
30
pieces
KA6H
171
8 Wire
Butt Connector – Red
KA24
pieces
LP579_Heat Shrink Tubing,
Heavy Wall
LP379_Heat Shrink Tubing, Dual Wall
and Thin Wall, 6" Lengths
LP379
Heat Shrink Tubing, Dual Wall and Thin Wall, 6" Lengths
*91661*
91661
Red Thin Wall
20–18 Wire Ga. Coverage
.125 Expanded I.D.
.062 Recovered I.D.
.02 Recovered
Wall Thickness
45
A1D02
*86505*
86505
Blue Thin Wall
.25 Expanded I.D.
.125 Recovered I.D.
.025 Recovered
Wall Thickness
*86506*
86506
*89465*
89465
Yellow Thin Wall
.312 Expanded I.D.
.156 Recovered I.D.
.025 Recovered
Wall Thickness
Clear Dual Wall
.29 Expanded I.D.
.08 Recovered I.D.
.047 Recovered
Wall Thickness
*89466*
89466
Clear Dual Wall
.375 Expanded I.D.
.135 Recovered I.D.
.05 Recovered
Wall Thickness
®
Clear Dual Wall
.5 Expanded I.D.
.195 Recovered I.D.
.055 Recovered
Wall Thickness
A17
LP517
Battery Cable Lugs, Heavy-Duty Copper
*84845*
84845
*84846*
84846
*45826*
45826
*84847*
84847
*84848*
84848
2/0 Ga., 3/8 Stud
2/0 Ga., 1/2 Stud
3/0 Ga., 3/8 Stud
3/0 Ga., 1/2 Stud
4/0 Ga., 3/8 Stud
4/0 Ga., 1/2 Stud
*96128*
96128
*84839*
84839
*84840*
84840
*84841*
84841
*84842*
84842
*84843*
84843
1 Ga., 1/2 Stud
1/0 Ga., 5/16 Stud
1/0 Ga., 3/8 Stud
1/0 Ga., 1/2 Stud
2/0 Ga., 1/4 Stud
2/0 Ga., 5/16 Stud
*84834*
84834
*84835*
84835
*84836*
84836
*96129*
96129
*84837*
84837
*84838*
84838
2 Ga., 1/4 Stud
2 Ga., 5/16 Stud
2 Ga., 3/8 Stud
2 Ga., 1/2 Stud
1 Ga., 1/4 Stud
1 Ga., 3/8 Stud
*96131*
96131
*84830*
84830
*96130*
96130
*84831*
84831
*84832*
84832
*45822*
45822
8 Ga., No. 10 Stud
6 Ga., 1/4 Stud
6 Ga., 3/8 Stud
4 Ga., No. 10 Stud
4 Ga., 1/4 Stud
PHOTOS ACTUAL SIZE
pieces
*86503*
86503
9" Black
2–4/0 Wire Ga. Coverage
1.1 Expanded I.D., .375 Recovered I.D.
.12 Recovered Wall Thickness
6" Black
.75 Expanded I.D., .22 Recovered I.D.
*87752*
87752
*87751*
87751
9" Red
2–4/0 Wire Ga. Coverage
1.1 Expanded I.D., .375 Recovered I.D.
6" Red
*86502*
86502
*91662*
91662
6" Black
6" Red
Serviced only by
®
Serviced only by
®
KL227
Conductaloy™ Cross-Linked
Polyethylene Insulation
Primary Wire Assortment
*84844*
84844
96
*86504*
86504
18
pieces
LP517_Battery Cable Lugs,
Heavy-Duty Copper
A20
Heat Shrink Tubing, Heavy Wall
*89467*
89467
Serviced only by
pieces
LP579
• Tough, durable and self-extinguishing
• Meets SAE J1128 Specifications, Type SXL,
GXL and TXL
• Highly flexible, resists gasoline, oil, antifreeze and other automotive chemicals
• Temperature range: –40°F to +221°F
(–40°C to +105°C)
• Highly conductive, multi-strand copper wire
• All gauges and colors spooled on
100 foot rolls
Description
Conductaloy Cross-Linked Primary Wire Assortment
Contains: One roll each of Black, Red and White Wire
in 16, 18, 20 and 22 gauges. Twelve rolls total.
Includes one KA5800 Wire/Hose Rack.
™
4 Ga., 3/8 Stud
13
kit
14
Inner Panel and Outer Panel Rustproofer
Kit with Wand
Inner Panel Rustproofer
A superior wax-based penetrating rust and
corrosion preventive for all inner metal
surfaces.
• Penetrates to protect inner panels,
seams and creases
• May be spot and MIG welded through
• Will not produce corrosive by products
during welding
• Restores factory-applied rust/corrosion
protection
• Low VOC content
Description
3 each – Inner and Outer
Panel Rustproofer
24 Oz. Aerosol Cans
Includes 1 Aerosol Extension
Wand (KT14725)
kit
Outer Panel Rustproofer
A heavy-bodied rustproofer provides
superior rust/corrosion protection for
underhood and underbody panels.
• Protects outer panels, provides
maximum protection
• Heavy body stays where it is sprayed
• Excellent adhesion, build and flexibility
Extension Wand - 3' long wand with
360° spray nozzle
Part
A specially formulated
two-part repair compound
designed to be used to
repair a broad range of
plastic.
• Fast cure – working time
2 to 3 minutes
• Ideal for replacing and
reinforcing
rips or tears in plastic
• Sandable in 10 minutes,
paintable
in 30 minutes
No.
KL192
• Bead size – 3/8"
maximum, 1/8" minimum
kit
For non-structural outer panels such as quarter panels,
box sides, roofs, van sides and hem flange applications.
Description
Six - 1.7 Oz. Job Size
with One Turbo Mixer Each
Includes Applicator Gun
Part
No.
KL193
kit
Panel Sealer-Adhesive Kit
For non-structural outer panels such as quarter panels,
van sides, truck box sides, roofs, hem flanges and truck
side panels.
• Non-sagging, fills gaps
to 1/2"
• High-strength sealer adhesive
for larger steel body panels
• Contains glass beads for
borderline control
• 45 minute cure
time/paintable
or bakeable in
one hour
• Bonds and seals in one
step
• Black color
• Reduces the need for
welding, fastener or rivets
• Neutral color
covers easily
with any color
paint
• Long working time
– 90 minutes
• Provides added corrosion
protection
kit
• Can be used on PP,
EPDM, Xenoy®,
ABS, PPO, RIM, etc.
Panel Adhesive – 2:1 Kit
• Cure time can be
accelerated with heat
Plastic Quick Fix
Job Size Kit
Description
Four - 7 Oz. Dual Cartridges
with Two Square Turbo Mixers Each (KT12579)
Includes Applicator Gun
Part
No.
KL189
• Contains glass
beads for
borderline control
Description
Four - 10 Oz. Dual Cartridges
with Two Turbo Mixers Each (P30050)
Includes Applicator Gun (PA33705)
Part
No.
P6858
kit
Door Skin Sealer-Adhesive
Flex-E-6020 – High Build Kit
kit
Specially formulated to bond and seal door skins,
deck lid skins and other hem flanges.
Fast curing, high viscosity non-sag two-component
seam sealer that provides maximum build.
kit
• High-strength door skin adhesive – up to 1,000 PSI
• 20% greater viscosity
than Flex-E-6000™
• 45 minute work life allows crimping and
alignment of door skin
• Maximum non-sag –
ideal for maximum build
• Bonds and seals in one step
• 8 to 10 minute work life
• Paintable 30 minutes
after cure
• Paintable in 30 minutes –
sandable in 20 minutes
• Cure time may be
accelerated by heat
• 100% solids – no VOC
• 100% solids
• Light gray color
Description
Four Cartridges with Applicator Gun
DTM High Build Seam Sealer
Part
Description
Part
Four - 10 Fl. Oz. Dual Cartridges
with Two Turbo Mixers Each (P30050)
Includes Applicator Gun (PA33705)
No.
P6185
kit
No.
KL194
100% solids polyurethane seam sealer for painted or primed parts, steel,
aluminum, galvanized metal and plastic. Eliminates cracking, peeling and
shrinking. Available in neutral and black for matching adjoining parts or
easy painting.
A heavy-body two-part seam sealer designed for exterior
and interior applications.
• Non-sag formula with extended working time (10 to 15
minutes)
• Excellent adhesion to many surfaces including bare metal*
• Paintable immediately or any time
after curing
• Black color matches many OEM sealers
• 100% solids – will not shrink or crack
• Holds tool marks for desired finish
• No sagging on vertical surfaces
• Paintable in 60 minutes
• Bakeable in bodyshop paint bake
ovens up to 200°F (93°C)
• Remains flexible, will
not shrink or crack
• Resealable screw-top cartridge
accepts various applicators and
nozzles
*For best results always follow
OEM recommendations for
priming procedures
Description
Four Cartridges with Applicator Gun
kit
Quick Seal™ Sausage Pack Starter Kit
• Withstands intermittent temperature
to 325°F (163°C) for ten minutes
• GM No. 9984532; Ford Tox Nos.:
Neutral – 157850; Black – 156632
Part
No.
KL200
15
Description
18 – 300ml (10 Oz.) Sausage Packs,
Neutral
Includes Applicator Gun No. KT13483
Part
No.
KL195
16
kit
Underbody Cavity Wax
• Premium quality underbody cavity wax
• Protects against rust, salt and corrosion
• Creeps and penetrates
• Never becomes brittle or loses adhesion
• Resists abrasion
• Available in two viscosities:
Heavy-Duty (HD) – 2,000 cPs and
Extreme Duty (ExD) – 3,000 cPs
• Amber color
• 850ml Shutz can for easy application
A synthetic rubber-based coating
formulated to withstand abrasion,
temperature extremes and exposure
to sun, water, ice and snow.
Recommended for wheel wells,
door skins, trunk area and seams.
• Matches OEM color, finish
and texture
• Easy-to-use aerosol can
available in two formulations
• Easily paintable
Part
Description
No.
HD Underbody Cavity Wax Kit:
4 – KT14995 Underbody Cavity Wax
and 1 Siphon Gun P30025
KL218
ExD Underbody Cavity Wax Kit:
4 – KT14996 Underbody Cavity Wax
and 1 Siphon Gun P30025
KL219
kit
Low VOC Compliant
Rubber Guard Kit with
Siphon Gun
Description
4 – 1 Quart Shutz Cans, Low VOC
Includes Siphon Gun P30025
Part
No.
KL208
kit
kit
Euro-Paste Mounting Compound Kit
Rear View Mirror Adhesive Kit
• The best adhesive for the hardest bonding job
• A two-part adhesive that bonds glass and rubber together
• Permanently bonds rear view mirror bracket to windshield
• Achieves 60% of full strength in two minutes or less
Adhesive – 0.01 fl. oz. (0.3ml) net wt.
Primer – 0.02 fl. oz. (0.6ml) net wt.
Description
Rear View Mirror Adhesive
Job Size Kit
Part
No.
93233
• Excellent for low profile tires
• Prevents bonding of tire to rim
• Silicone free
• Ideal for BMW
• 11 lb. (5 kg) tub
Description
Two – 11 Lb. tubs Euro-Paste
Mounting Compound
Includes Euro-Paste Application Brush
Part
No.
KL196
kit
Citrus Peeler Kit
Powerful citrus formula with pumice to scrub off grease, oil, tar, undercoat
and rustproofing materials. Solvent-free and pH balanced. Conditions with
Vitamin E, glycerin, jojoba, aloe vera and wheat germ extract. Pleasant
citrus scent.
Description
Includes 6 cans each of:
Pene-Grease SL (KT13129)
Super Slick Dry Lube™ (P50077)
Total Rubber Clean (KT14605)
White Grease (KT13130)
Rusty™ Penetrant (KT13127)
Storage Cabinet (PA5725)
Part
No.
Four - 4,000ml Tanks of Citrus Peeler
Includes Wall Mount Dispenser
KL152
LP516_Brass Pipe Fittings – Plugs, Bushings,
LP421_Brass Air Brake Fittings for
Nylon Tubing, 1/4" – 1/2"
Reducers, Couplings, Street Elbows
LP516
*82257*
82257
*5291*
5291
1/2
Hex Head Plug
3/4
Hex Head Plug
1/2
Coupling
1/2
90° Street Elbow
*86662*
86662
*5281*
5281
*5290*
5290
*5317*
5317
3/8
Hex Head Plug
1/2 x 1/4
Bushing
3/4 x 1/2
Bushing
3/8 Male x 1/2 Female
Reducing Adapter
3/8
Coupling
3/8
90° Street Elbow
*5363*
5363
*5284*
5284
*5287*
5287
*5280*
5280
*5289*
5289
*5316*
5316
1/4
Hex Head Plug
3/8 x 1/4
Bushing
1/2 x 3/8
Bushing
Reducing Adapter
1/4
Coupling
1/4
90° Street Elbow
*5362*
5362
*5282*
5282
*5279*
5279
*5288*
5288
*5315*
5315
1/8
Hex Head Plug
1/4 x 1/8
Bushing
Reducing Adapter
1/8
Coupling
1/8
90° Street Elbow
PHOTOS ACTUAL SIZE
Serviced only by
®
*81180*
81180
Stainless Steel Insert
1/4 Tube
3/8 Tube
1/2 Tube
Union
1/4 Tube
Union
3/8 Tube
Union
1/2 Tube
*84328*
84328
*84323*
84323
*86584*
86584
*86583*
86583
*84271*
84271
*84287*
84287
Nut
1/2 Tube
Sleeve
1/2 Tube
Male Connector
1/2 Tube x 1/4 Pipe
*84327*
84327
*84322*
84322
*84268*
84268
17
Nut
3/8 Tube
Sleeve
3/8 Tube
Male Connector
3/8 Tube x 1/4 Pipe
*84326*
84326
*84321*
84321
*84266*
84266
Nut
1/4 Tube
Sleeve
1/4 Tube
Male Connector
1/4 Tube x 1/8 Pipe
PHOTOS ACTUAL SIZE
*84253*
84253
90° Male Elbow
1/2 Tube x 1/4 Pipe
*84254*
84254
*81179*
81179
A20
Brass Air Brake Fittings for Nylon Tubing, 1/4" – 1/2"
*84320*
84320
*5318*
5318
*5286*
5286
pieces
LP421
*5364*
5364
90
A20
Brass Pipe Fittings – Plugs, Bushings, Reducers, Couplings, Street Elbows
*5365*
5365
kit
KL231
Lube and Cleaner Kit
VOC Compliant
Male Connector
1/2 Tube x 3/8 Pipe
*84284*
84284
*84310*
84310
90° Male Elbow
3/8 Tube x 1/4 Pipe
45° Male Elbow
3/8 Tube x 1/4 Pipe
*84282*
84282
*84267*
84267
90° Male Elbow
1/4 Tube x 1/8 Pipe
Serviced only by
®
Male Connector
1/4 Tube x 1/4 Pipe
*84255*
84255
90° Male Elbow
1/2 Tube x 3/8 Pipe
*84283*
84283
90° Male Elbow
1/4 Tube x 1/4 Pipe
135
pieces
18
LP86_Grease Fittings, Ball Check Type
LP86
Grease Fittings, Ball Check Type
*6201*
6201
1/4–28 Tapered Thread
11/16 Overall Length
*6202*
6202
*6202*
6202
1/2 Overall Length
1/2 Overall Length
LP300_Metric Grease Fittings
*6200*
6200
*6200*
6200
Drive Type
5/16 Thread
1/8 Pipe Thread
1/8 Pipe Thread
*6203*
6203
*6203*
6203
*6214*
6214
*6207*
6207
1/8 Pipe Thread
90° Angle
1/8 Pipe Thread
90° Angle
90° Angle
1/8 Pipe Thread
45° Angle
7/8 Overall Length
*6204*
6204
*6209*
6209
*6206*
6206
45° Angle
45° Angle
150
A20
Serviced only by
PHOTOS ACTUAL SIZE
®
A7
Super 77 Hose Clamps, 300 Stainless Steel
*85494*
85494
*85496*
85496
*85498*
85498
*81020*
81020
SAE Size 10
1/2 – 1-1/8 Clamping Range
SAE Size 16
*86327*
86327
*85495*
85495
*85497*
85497
M6
45° Angle
M6
90° Angle
Green
Grease Cap
*81021*
81021
*81024*
81024
*90831*
90831
M8
Straight
M8
45° Angle
M8
90° Angle
White
Grease Cap
*81019*
81019
*81022*
81022
*81025*
81025
*90827*
90827
Blue
Grease Cap
M10
Straight
M10
45° Angle
M10
90° Angle
*90826*
90826
*90828*
90828
*90830*
90830
Red
Grease Cap
Yellow
Grease Cap
SAE Size 4
7/32 – 5/8 Clamping Range
pieces
PHOTOS ACTUAL SIZE
SAE Size 8
7/16 – 1 Clamping Range
SAE Size 12
Serviced only by
®
450
pieces
®
*85499*
85499
SERVICED ONLY BY
*P7723*
P7723
1
*P36747*
P36747
7
*P38713*
P38713
*P53576*
P53576
SAE Size 20
*P58511*
P58511
3/16" x 1/4" x 3/16"
3-Way Reducer
KA24
KENT AUTOMOTIVE
Hose Connector Caps
*P32135*
P32135
8
*P47256*
P47256
3
*P32097*
P32097
9
*KT12461*
KT12461
1/8"
Vacuum Cap
1/4"
Straight Connector
13
®
2
*P58514*
P58514
*P21729*
P21729
*P32077*
P32077
10
*P20676*
P20676
*P21903*
P21903
PHOTOS ACTUAL SIZE
5
*P47202*
P47202
6
*P20882*
P20882
*P47216*
P47216
*P53573*
P53573
1/4"
3-Way T Connector
18
1/8" x 1/4"
Straight Reducer
23
*P38718*
P38718
3/16"
Straight Connector
12
3/16"
3-Way T Connector
17
1/8" x 3/16"
Straight Reducer
22
*P38729*
P38729
1/8"
Straight Connector
11
1/8"
3-Way T Connector
16
3/16" x 3/16" x 3/16"
Y Connector
21
1-888-937-5368
1/4"
Vacuum Cap
3/8"
Straight Connector
15
1/8" x 3/16" x 1/8"
Y Connector
20
4
3/16"
Vacuum Cap
5/16"
Straight Connector
14
1/8" x 1/8" x 1/8"
Y Connector
80
Black
Grease Cap
Serviced only by
P7723_Hose Connector Caps
Assortment
19
A12
*90829*
90829
M6
Straight
1/8"
Vacuum Cap
Heavy-Duty
SAE Size 6
7/16 – 7/8 Clamping Range
*81023*
81023
*81018*
81018
PHOTOS ACTUAL SIZE
LP432_Super 77 Hose Clamps,
300 Stainles Steel
LP432
Metric Grease Fittings
*81017*
81017
1/8 Pipe Thread
65° Angle
*6210*
6210
pieces
LP300
*6205*
6205
*P47241*
P47241
3/16" x 1/4"
Straight Reducer
24
440
3/16"
Elbow Connector
pieces
KL119_Drain Plugs Assortment
LP96_Buna-N O-Rings, Small Dia.
LP96
Buna-N O-Rings, Small Dia.
*11186_01*
11186 01
*11186_02*
11186 02
*11186_03*
11186 03
*11186_04*
11186 04
*11186_05*
11186 05
SERVICED ONLY BY
*11186_21*
11186 21
*KL119*
1
1/8 I.D., 1/4 O.D.
1/16 Thick
Industry No. 006
5/32 I.D., 9/32 O.D.
1/16 Thick
Industry No. 007
3/16 I.D., 5/16 O.D.
1/16 Thick
Industry No. 008
7/32 I.D., 11/32 O.D.
1/16 Thick
Industry No. 009
1/4 I.D., 3/8 O.D.
1/16 Thick
Industry No. 010
1-1/8 I.D.
1-3/8 O.D.
1/8 Thick
Industry No. 216
*11186_06*
11186 06
*11186_07*
11186 07
*11186_08*
11186 08
*11186_09*
11186 09
*11186_10*
11186 10
*11186_22*
11186 22
1/2 I.D., 11/16 O.D.
3/32 Thick
Industry No. 112
1-3/16 I.D.
1-7/16 O.D.
1/8 Thick
Industry No. 217
*P43370M01*
P43370M01
*11186_11*
11186 11
9/16 I.D., 3/4 O.D.
3/32 Thick
Industry No. 113
*11186_16*
11186 16
3/8 I.D., 1/2 O.D.
1/16 Thick
Industry No. 012
*11186_12*
11186 12
5/8 I.D., 13/16 O.D.
3/32 Thick
Industry No. 114
*11186_17*
11186 17
3/8 I.D., 9/16 O.D.
3/32 Thick
Industry No. 110
7/16 I.D., 5/8 O.D.
3/32 Thick
Industry No. 111
*11186_13*
11186 13
*11186_14*
11186 14
11/16 I.D., 7/8 O.D.
3/32 Thick
Industry No. 115
*11186_18*
11186 18
3/4 I.D., 15/16 O.D.
3/32 Thick
Industry No. 116
*11186_19*
11186 19
*11186_15*
11186 15
3/4 I.D., 1 O.D.
1/8 Thick
Industry No. 210
*11186_20*
11186 20
*P66777M01*
P66777M01
M12 x 1.25 with Regular Point
14mm Hex Head
Toyota and Nissan
Replacement Gasket P30351M01
*11186_23*
11186 23
13
1-1/4 I.D.
1-1/2 O.D.
1/8 Thick
Industry No. 218
*KT13219*
KT13219
M14 x 1.25
13mm Hex Head
Jeep and Eagle
Jeep No. 83501425
*11186_24*
11186 24
19
13/16 I.D., 1-1/16 O.D.
1/8 Thick
Industry No. 211
400
A20
7/8 I.D., 1-1/8 O.D.
1/8 Thick
Industry No. 212
15/16 I.D., 1-3/16 O.D.
1/8 Thick
Industry No. 213
1 I.D., 1-1/4 O.D.
1/8 Thick
Industry No. 214
Serviced only by
PHOTOS ACTUAL SIZE
®
1-1/16 I.D., 1-5/16 O.D.
1/8 Thick
Industry No. 215
*KT13214*
KT13214
1-5/16 I.D.
1-9/16 O.D.
1/8 Thick
Industry No. 219
M14 x 1.50
13mm Hex Head
Chrysler and Mitsubishi
Chrysler No. 6506214AA
80
pieces
LP479
A1D01
pieces
KENT AUTOMOTIVE
Drain Plugs
*P54704M01*
P54704M01
1/2"–20 with Regular Point
3/4" Hex Head
Chrysler, Ford and AMC
Replacement Gasket KT11775
8
*P30291M01*
P30291M01
3
1/2"–20 with Regular Point
7/8" Hex Head
Chrysler, Ford and AMC
9
*P66765M01*
P66765M01
15
20
*KT13215*
KT13215
10
*KT13211*
KT13211
PHOTOS ACTUAL SIZE
Hardflex Reciprocating Saw Blades
®
5
16
*KT13210*
KT13210
*P28591M01* 11
P28591M01
21
22
6
*KT13212*
KT13212
*P66772M01*
P66772M01
M14 x 1.50
16mm Hex Head
Ford, Honda, Mazda and Opel
23
*P49565M01*
P49565M01
5/8"–18 Oversized
7/8" Hex Head
Oversize Tapping Thread
12
*KT13221*
KT13221
M12 x 1.75
with Insert Rubber Gasket
13mm Hex Head
Ford
Ford No. YS4Z-6730-AA
M12 x 1.75
14mm Hex Head
Saturn
Saturn No. 21006725
*P28601M01* 17
P28601M01
M14 x 1.50 with Dog Point
16mm Hex Head
Chrysler, Ford, Mazda and Opel
*P3092M01*
P3092M01
1/2"–20 Oversized
3/4" Hex Head
Oversize Tapping Thread
15mm Hex Head; GMC and AMC
M14 x 1.50
17mm Hex Head
Honda, Chrysler, Mitsubishi,
Suzuki and Toyota
Honda No. 90009 – PH1-000
13mm Hex Head
Chrysler, Ford, Mazda, Opel and AMC
PHOTOS ACTUAL SIZE
*KT13209*
KT13209
1/2"–20 with Dog Point
7/8" Hex Head
Cadillac and Chrysler
M12 x 1.25
14mm Hex Head
Toyota, Nissan
and Mercury Villager 3.0
Nissan No. 11128 – 01M05
14mm Hex Head
Toyota and Nissan
14
4
*KT13206*
KT13206
1-888-937-5368
18
*KT13207*
KT13207
13mm Hex Head
Chrysler, Ford, Mazda,
AMC and Opel
24
M14 x 1.50
17mm Hex Head
Honda Long Version
Honda No. 90009 – PY3-000
440
pieces
KA24
pieces
LP753_Hardflex® Regency 0.042"
Reciprocating Saw Blades
LP479_Hardflex® Reciprocating
Saw Blades
16
2
1/2"–20 with Dog Point
9/16" Hex Head
Chrysler, GMC and AMC
7
5/16 I.D., 7/16 O.D.
1/16 Thick
Industry No. 011
®
KL119
LP753
Hardflex® Regency 0.042" Reciprocating Saw Blades
*95650*
95650
*29513*
29513
12" Length
10 – 14
Teeth per Inch
12" Length
14 Teeth per Inch
*95649*
95649
*29510*
29510
12" Length
5–8
Teeth per Inch
9" Length
18 Teeth per Inch
*95648*
95648
*29509*
29509
6" Length
10 – 14
Teeth per Inch
9" Length
14 Teeth per Inch
*95646*
95646
*29506*
29506
6" Length
8 – 12
Teeth per Inch
6" Length
18 Teeth per Inch
*95647*
95647
*95645*
95645
*29505*
29505
6" Length
5–8
Teeth per Inch
4" Length
10 – 14
Teeth per Inch
6" Length
14 Teeth per Inch
*95661*
95661
*95644*
95644
*29504*
29504
6" Length
6 Teeth per Inch
For Plaster
4" Length
8 – 12
Teeth per Inch
Serviced only by
®
6" Length
10 Teeth per Inch
A1D01
19
PHOTOS ACTUAL SIZE
Serviced only by
®
21
pieces
20
50292_Regency Mechanic's Length
Drill Bit Set
91894_Regency Drill and Reamer Set
• Regency Jobber Length Drills:
3/16" to 3/8" by 8ths;
• Reamers: 3/8" to 3/4"
by 8ths
•8-piece set
• 1/16" to 1/2" by 64ths
• 29 pieces
KL226_E-Z Scuff ™ Abrasive Discs
Assortment
KL225_Mechanical Lock Grinding Discs,
Aluminum Oxide Grain Assortment
SERVICED ONLY BY
*KL226*
KL226
1
®
KENT AUTOMOTIVE
E-Z Scuff™ Abrasive Discs
*P69230*
P69230
2
*P68272*
P68272
1-888-937-5368
PHOTOS ACTUAL SIZE
3
4
*KT14921*
KT14921
*P68302*
P68302
SERVICED ONLY BY
*KL225*
KL225
1
®
KENT AUTOMOTIVE
Mechanical Locking Grinding Discs, Aluminum Oxide Grain
*P35233*
P35233
2
*P35374*
P35374
3
*P35424*
P35424
1-888-937-5368
PHOTOS ACTUAL SIZE
4
1/4" Shank Holder
for 2" Discs
1/4" Shank Holder
for 2" Discs
2"
24 Grit
5
2" Fine
Blue
5
*KT14922*
KT14922
2" Medium
Maroon
6
*P35604*
P35604
2" Heavy-Duty Medium
Maroon
7
2"
36 Grit
6
*P36052*
P36052
*P36062*
P36062
2" Extra Coarse
Brown
101
pieces
KA13
2" Coarse
Brown
10
*P68267*
P68267
2" Coarse
Brown
11
8
8
2"
80 Grit
*P68267*
P68267
2"
50 Grit
7
*P68267*
P68267
*P68303*
P68303
1/4" Shank Holder
for 3" Discs
9
9
*P68302*
P68302
2"
120 Grit
10
*P36178*
P36178
11
*P36423*
P36423
12
*P36919*
P36919
12
2" Coarse
Brown
3"
24 Grit
KA13
3"
36 Grit
3"
50 Grit
3"
80 Grit
92
pieces
LP106_Nylon Insert Locknuts (For Use
with Grade 5 and Grade 2)
kit
LP106
Pressure Sensitive Adhesive
Abrasive Disc Linked Roll
Starter Pack
• 6" diameter
• "P" graded aluminum oxide grain
• Heavy-duty paper backing
• Open coat, non-fill design
Part
No.
Description
PSA Linked Roll Starter Pack – 4 Rolls (100 sheets/roll)
Contains: One roll each of 80 grit (KT15131),
180 grit (KT15134), 220 grit (KT15135) and
320 grit (KT15136)
1
*FA501*
FA501
7
*FA528*
FA528
13
*FA65003*
FA65003
*FA502*
FA502
8
*FA529*
FA529
14
*FA65004*
FA65004
5/16–18 x 1-1/2"
Grade 5 Hex Head Capscrew
KA24
*FA503*
FA503
9
*FA530*
FA530
15
*FA65016*
FA65016
*FA65031*
FA65031
3/8–16 x 3/4"
*FA95677*
FA95677
10
*FA65000*
FA65000
5/16–18 x 3/4"
21
*FA65032*
FA65032
3/8–16 x 1"
11
*FA65001*
FA65001
*FA65017*
FA65017
*FA65033*
FA65033
3/8–16 x 1-1/4"
6
*FA95679*
FA95679
12
*FA65002*
FA65002
5/16–18
Grade 5 Hex Nut
*FA65018*
FA65018
10–24
6–32
8–32
10–32
*303*
303
*304*
304
7/16–14
5/16–18
3/8–16
*306*
306
*307*
307
5/8–11
3/4–10
*315*
315
7/16–20
1/2–20
*301*
301
1/4–20
*305*
305
*311*
311
*314*
314
*305A*
305A
1/2–13
9/16–12
*312*
312
*313*
313
1/4–28
5/16–24
3/8–24
*315A*
315A
*316*
316
*317*
317
9/16–18
5/8–18
3/4–16
455
Serviced only by
PHOTOS ACTUAL SIZE
*FA65034*
FA65034
3/8–16 x 1-1/2"
*FA88445*
FA88445
pieces
®
*FA528A*
FA528A
13
*FA68003*
FA68003
19
3/8–16 x 2"
*FA68019*
FA68019
5/16–18 x 1-1/2"
21
KA24
KENT AUTOMOTIVE
FalconGrip Grade 8 Capscrews, 1/4" to 3/8" UNC
*FA88446*
FA88446
3
5/16" USS
Thru-Hardened Flat Washer
*FA529A*
FA529A
14
*FA68004*
FA68004
*FA68031*
FA68031
3/8–16 x 3/4"
4
*FA68400*
FA68400
10
*FA68000*
FA68000
3/8" USS
*FA530A*
FA530A
15
*FA68016*
FA68016
5/16–18 x 3/4"
21
*FA68032*
FA68032
3/8–16 x 1"
*FA68017*
FA68017
11
*FA68001*
FA68001
*FA68033*
FA68033
3/8–16 x 1-1/4"
6
*FA68402*
FA68402
12
*FA68002*
FA68002
5/16–18
Grade 8 Hex Nut
3/8–16
Grade 8 Hex Nut
1/4–20 x 3/4"
17
5/16–18 x 1"
22
PHOTOS ACTUAL SIZE
*FA68401*
FA68401
1/4–20 x 1/2"
16
1-888-937-5368
5
1/4–20
Grade 8 Hex Nut
3/8"
Alloy Lockwasher
1/4–20 x 1-1/2"
20
*FA88447*
FA88447
9
5/16"
Alloy Lockwasher
1/4–20 x 1-1/4"
*FA65036*
FA65036
®
8
1/4"
Alloy Lockwasher
*FA65021*
FA65021
5/16–18 x 2"
24
2
1/4" USS
7
1/4–20 x 1"
18
5/16–18 x 1-1/4"
23
1
3/8–16
Grade 5 Hex Nut
1/4–20 x 3/4"
17
5/16–18 x 1"
22
*322*
322
*302*
302
SERVICED ONLY BY
*KL222*
KL222
PHOTOS ACTUAL SIZE
*FA95678*
FA95678
1/4–20 x 1/2"
16
1-888-937-5368
5
1/4–20
Grade 5 Hex Nut
3/8"
Lockwasher
1/4–20 x 1-1/2"
20
4
3/8" USS
Flat Washer
5/16"
Lockwasher
1/4–20 x 1-1/4"
pieces
3
5/16" USS
Flat Washer
1/4" Lockwasher
1,205
KENT AUTOMOTIVE
FalconGrip Grade 5 Capscrews, 1/4" to 3/8" UNC
2
1/4" USS
Flat Washer
*FA65019*
FA65019
®
*321A*
321A
KL222_FalconGrip Grade 8 Capscrews,
1/4" to 3/8" UNC Assortment
KL223_FalconGrip Grade 5 Capscrews,
1/4" to 3/8" UNC Assortment
SERVICED ONLY BY
*KL223*
KL223
*321*
321
KL230
A20
19
Nylon Insert Locknuts (For Use with Grade 5 and Grade 2)
*320*
320
*FA68018*
FA68018
1/4–20 x 1"
18
5/16–18 x 1-1/4"
23
*FA68034*
FA68034
3/8–16 x 1-1/2"
*FA68021*
FA68021
5/16–18 x 2"
24
*FA68036*
FA68036
1,205
3/8–16 x 2"
pieces
22
KL176_FalconGrip Grade 8 Cap Screw
Fastening System Starter Assortment
KL177_FalconGrip Grade 5 Cap Screw
Fastening System Starter Assortment
UNC Thread
1/4" to 1/2" dia.,
1/2" to 3" cap screw lengths
UNC Thread
1/4" to 1/2" dia.,
1/2" to 3" cap screw lengths
• Yellow Zinc-Plated
•150,000 PSI
• Zinc-Plated
•120,000 PSI
KA40 Bin
KA40 Bin
FA68400
1/4–20
Hex Nut
(200)
FA88445
1/4 USS
Flat Washer
(500)
FA528A
1/4
Lockwasher
(250)
FA68000
1/4–20 x 1/2
Capscrew
(50)
FA68001
1/4–20 x 3/4
Capscrew
(50)
FA68002
1/4–20 x 1
Capscrew
(50)
FA68003
1/4–20 x 1-1/4
Capscrew
(50)
FA68006
1/4–20 x 2
Capscrew
(50)
FA95677
1/4–20
Hex Nut
(200)
FA501
1/4 USS
Flat Washer
(500)
FA528
1/4
Lockwasher
(250)
FA65000
1/4–20 x 1/2
Capscrew
(50)
FA65001
1/4–20 x 3/4
Capscrew
(50)
FA65002
1/4–20 x 1
Capscrew
(50)
FA65004
1/4–20 x 1-1/2
Capscrew
(50)
Open
FA68401
5/16–18
Hex Nut
(200)
FA88446
5/16 USS
Flat Washer
(500)
FA529A
5/16
Lockwasher
(250)
FA68016
5/16–18 x 3/4
Capscrew
(50)
FA68017
5/16–18 x 1
Capscrew
(50)
FA68018
5/16–18 x 1-1/4
Capscrew
(50)
FA68021
5/16–18 x 2
Capscrew
(50)
FA68023
5/16–18 x 2-1/2
Capscrew
(50)
FA95678
5/16–18
Hex Nut
(200)
FA502
5/16 USS
Flat Washer
(500)
FA529
5/16
Lockwasher
(250)
FA65016
5/16–18 x 3/4
Capscrew
(50)
FA65017
5/16–18 x 1
Capscrew
(50)
FA65018
5/16–18 x 1-1/4
Capscrew
(50)
FA65019
5/16–18 x 1-1/2
Capscrew
(50)
FA65021
5/16–18 x 2
Capscrew
(50)
FA68402
3/8–16
Hex Nut
(200)
FA88447
3/8 USS
Flat Washer
(500)
FA530A
3/8
Lockwasher
(100)
FA68032
3/8–16 x 1
Capscrew
(50)
FA68033
3/8–16 x 1-1/4
Capscrew
(50)
FA68034
3/8–16 x 1-1/2
Capscrew
(50)
FA68036
3/8–16 x 2
Capscrew
(50)
FA68038
3/8–16 x 2-1/2
Capscrew
(50)
FA95679
3/8–16
Hex Nut
(200)
FA503
3/8 USS
Flat Washer
(500)
FA530
3/8
Lockwasher
(250)
FA65031
3/8–16 x 3/4
Capscrew
(50)
FA65032
3/8–16 x 1
Capscrew
(50)
FA65033
3/8–16 x 1-1/4
Capscrew
(50)
FA65034
3/8–16 x 1-1/2
Capscrew
(50)
FA65035
3/8–16 x 1-3/4
Capscrew
(50)
FA68404
1/2–13
Hex Nut
(100)
FA88449
1/2 USS
Flat Washer
(200)
FA532A
1/2
Lockwasher
(200)
FA68060
1/2–13 x 1
Capscrew
(25)
FA68062
1/2–13 x 1-1/2
Capscrew
(25)
FA68064
1/2–13 x 2
Capscrew
(25)
Open
FA68040
3/8–16 x 3
Capscrew
(50)
FA65036
3/8–16 x 2
Capscrew
(50)
FA65038
3/8–16 x 2-1/2
Capscrew
(50)
FA65040
3/8–16 x 3
Capscrew
(50)
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
FA68066
1/2–13 x 2-1/2
Capscrew
(25)
FA68068
1/2–13 x 3
Capscrew
(25)
FA95681
1/2–13
Hex Nut
(100)
FA505
1/2 USS
Flat Washer
(200)
FA532
1/2
Lockwasher
(100)
FA65060
1/2–13 x 1
Capscrew
(25)
FA65062
1/2–13 x 1-1/2
Capscrew
(25)
FA65063
1/2–13 x 1-3/4
Capscrew
(25)
FA65064
1/2–13 x 2
Capscrew
(25)
4,125
Open
pieces
Open
4,200
pieces
KL179_Tuff-Torq® Fastening System
Starter Assortment
KL178_Tru-Torq® Fastening System
Starter Assortment
UNC Thread
1/4" to 3/8" dia.,
1/2" to 2-1/2" cap screw lengths
UNC Thread
1/4" to 1/2" dia.,
1/2" to 2-1/2" cap screw lengths
•180,000 minimum PSI
•150,000 PSI
KA40 Bin
KA40 Bin
82881
1/4–20
Hex Nut
(200)
88445
1/4 USS
Flat Washer
(100)
A528
1/4
Lockwasher
(250)
A600
1/4–20 x 1/2
Capscrew
(100)
A601
1/4–20 x 3/4
Capscrew
(100)
A602
1/4–20 x 1
Capscrew
(100)
A603
1/4–20 x 1-1/4
Capscrew
(100)
A604
1/4–20 x 1-1/2
Capscrew
(100)
A100
1/4–20
Hex Nut
(100)
88445
1/4 USS
Washer
(100)
600
1/4–20 x 1/2
Capscrew
(100)
601
1/4–20 x 3/4
Capscrew
(100)
602
1/4–20 x 1
Capscrew
(100)
603
1/4–20 x 1-1/4
Capscrew
(100)
604
1/4–20 x 1-1/2
Capscrew
(100)
606
1/4–20 x 2
Capscrew
(100)
82882
5/16–18
Hex Nut
(200)
88446
5/16 USS
Flat Washer
(100)
A529
5/16
Lockwasher
(250)
A617
5/16–18 x 1
Capscrew
(100)
A618
5/16–18 x 1-1/4
Capscrew
(100)
A619
5/16–18 x 1-1/2
Capscrew
(100)
A621
5/16–18 x 2
Capscrew
(100)
Open
A101
5/16–18
Hex Nut
(100)
88446
5/16 USS
Washer
(100)
616
5/16–18 x 3/4
Capscrew
(100)
617
5/16–18 x 1
Capscrew
(100)
618
5/16–18 x 1-1/4
Capscrew
(100)
619
5/16–18 x 1-1/2
Capscrew
(100)
621
5/16–18 x 2
Capscrew
(100)
623
5/16–18 x 2-1/2
Capscrew
(50)
82883
3/8–16
Hex Nut
(200)
88447
3/8 USS
Flat Washer
(100)
A530
3/8
Lockwasher
(100)
A632
3/8–16 x 1
Capscrew
(100)
A633
3/8–16 x 1-1/4
Capscrew
(100)
A634
3/8–16 x 1-1/2
Capscrew
(50)
A636
3/8–16 x 2
Capscrew
(50)
A638
3/8–16 x 2-1/2
Capscrew
(50)
A102
3/8–16
Hex Nut
(100)
88447
3/8 USS
Washer
(100)
632
3/8–16 x 1
Capscrew
(100)
633
3/8–16 x 1-1/4
Capscrew
(100)
634
3/8–16 x 1-1/2
Capscrew
(50)
635
3/8–16 x 1-3/4
Capscrew
(50)
636
3/8–16 x 2
Capscrew
(50)
638
3/8–16 x 2-1/2
Capscrew
(50)
Open
Open
Open
Open
Open
Open
Open
Open
A104
1/2–13
Hex Nut
(50)
88449
1/2 USS
Washer
(100)
660
1/2–13 x 1
Capscrew
(50)
661
1/2–13 x 1-1/4
Capscrew
(50)
Open
664
1/2–13 x 2
Capscrew
(50)
666
1/2–13 x 2-1/2
Capscrew
(50)
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
2,750
pieces
Open
Open
2,500
pieces
KL224_Metric 8.8 Coarse Thread
Capscrews Assortment
P7982_Metric 8.8 Fastening System
SERVICED ONLY BY
*KL224*
KL224
1
*4302*
4302
7
*80264*
80264
13
*27335*
27335
DIN Thread
M6 to M10 dia.,
10mm to 40mm cap screw lengths
KA40 Bin
M6
Flat Washer
80261
(100)
M6
Lockwasher
80275
(100)
M6 x 1.0 x 10
Capscrew
4264
(50)
M6 x 1.0 x 12
Capscrew
27329
(50)
M6 x 1.0 x 16
Capscrew
27330
(50)
M6 x 1.0 x 20
Capscrew
27331
(50)
M6 x 1.0 x 25
Capscrew
27332
(50)
M8 x 1.25
Hex Nut
4304
(50)
M8
Flat Washer
80263
(100)
M8
Lockwasher
80277
(100)
M8 x 1.25 x 12
Capscrew
27339
(50)
M8 x 1.25 x 16
Capscrew
27340
(50)
M8 x 1.25 x 20
Capscrew
27342
(50)
M8 x 1.25 x 25
Capscrew
27343
(50)
M8 x 1.25 x 30
Capscrew
27344
(50)
M10 x 1.5
Hex Nut
4305
(50)
M10
Flat Washer
80264
(100)
M10
Lockwasher
80278
(100)
M10 x 1.5 x 20
Capscrew
61268
(25)
M10 x 1.5 x 25
Capscrew
61269
(25)
M10 x 1.5 x 30
Capscrew
61270
(25)
M10 x 1.5 x 35
Capscrew
61271
(25)
M10 x 1.5 x 40
Capscrew
61272
(25)
Open
1,425
Open
*4304*
4304
8
*80265*
80265
14
*27340*
27340
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
M10 x 1.5 x 25mm
pieces
KA24
Save 30% or More
Over the Cost of Cans
Charge reusable aerosol containers with products
and compressed air with Kent’s Kwik and EZ Fill Plus
System. Ask your representative for details.
23
*4305*
4305
9
*27329*
27329
*61270*
61270
M10 x 1.5 x 30mm
*80250*
80250
10
*27330*
27330
*27342*
27342
*61272*
61272
M10 x 1.5 x 40mm
PHOTOS ACTUAL SIZE
5
*80261*
80261
11
*27331*
27331
*27343*
27343
*61282*
61282
M12 x 1.75 x 25mm
*80263*
80263
12
*27332*
27332
M8
Flat Washer
M6 x 1.0 x 20mm
17
M8 x 1.25 x 25mm
22
6
M6
Flat Washer
M6 x 1.0 x 16mm
16
M8 x 1.25 x 20mm
21
1-888-937-5368
M12 x 1.75
Hex Nut
M6 x 1.0 x 12mm
15
M8 x 1.25 x 16mm
20
4
M10 x 1.5
Hex Nut
M12
Flat Washer
M6 x 1.0 x 40mm
*61269*
61269
3
M8 x 1.25
Hex Nut
M10
Flat Washer
19
KENT AUTOMOTIVE
Metric 8.8 Coarse Thread Capscrews
2
M6 x 1.0
Hex Nut
M6 x 1.0
Hex Nut
4302
(100)
®
*27346*
27346
M6 x 1.0 x 25mm
18
M8 x 1.25 x 40mm
23
*61285*
61285
M12 x 1.75 x 40mm
*61268*
61268
M10 x 1.5 x 20mm
24
*61287*
61287
830
M12 x 1.75 x 50mm
pieces
kit
SF11609_ Universal Grab & Go Spill Kit
SHOP SOLUTIONS
SAFETY PRODUCTS
Quick response is essential to any spill clean-up.
Grab & Go kits are designed for single-use and
have everything you need in one handy kit. Place
in vehicles, labs, factories, fleet
garages, construction sites or
wherever liquids are stored.
Kit Contents:
20 16" x 18" pads
3 3" x 4' socks
1 Pair nitrile gloves
1 disposable bag and twist tie
1 clear zipper bag.
To order, call us at
888.YES.KENT (937.5368)
Or visit us on the web at
kent-automotive.com
SF10334_Battery Acid Spill Kit
Designed for quick response to leaking or spilled
battery acid (electrolyte). Also required for dry cell
and gel batteries.
Kit Contents:
2 Qt. Kolar-Safe® Liquid Acid Neutralizer
10 12" x 12" Hazmat Pads
1 1 oz. AQUALOCKIT® Polymer
1 Pair Nitrile Gloves
1 Pair Splash Goggles
1 Poly Apron
1 Trigger Spray
1 Scoop with Detachable Scraper
1 Disposable Bag & Twist Tie
1 Red Plastic Case
135
20
pieces
pieces
27
pieces
kit
kit
SF10004_Truck First Aid Kit
6-5/16" x 9-1/16" x 2-3/8"
Kit Contents:
1 Roll Non-Sterile Gauze Bandage,
2" x 4.1 Yd. (SF10027)
10 Non-Adherent Pads, 2" x 3" (SF10033)
2 Ammonia Inhalant Pads (SF10050)
4 Antiseptic Wipes (SF10055)
1 Pair Disposable Gloves (SF10114)
1 Pair Scissors (SF10109)
1 Pair Tweezers (SF10105)
6 Aspirin (SF10064)
8 Woven Fingertip Bandages (SF10015)
16 Woven Strip Bandages, 1" x 3" (SF10013)
8 Woven Knuckle Bandages (SF10014)
1 Triangular Bandage, 36" x 36" x 51" (SF10039)
3" Bandage Compress
1 Cold Pack (SF10104)
2 Sterile Gauze Pads, 3" x 3" (SF10031)
1 Eye Wash, 4 Oz. (SF10098)
1 First Aid Spray (SF10048)
1 Roll Elastic Tape, 1/2" x 5 Yd.*
1 First Aid Book (SF10113)
18
pieces
5
kit
SF10000_Small First Aid Kit
SF10003_Auto First Aid Kit
15-1/2" x 10-1/2" x 4-3/4"
7-11/16" x 4-5/8" x 2-3/8"
Kit Contents:
50 Plastic Strip Bandages, 3/4" x 3" (SF10010)
1 Roll Elastic Tape, 1/2" x 2-1/2 Yd.*
1 Roll Non-Sterile Gauze Bandage, 2" x 4.1 Yd.
(SF10027)
2 Gauze Pads, 2" x 2" (SF10030)
1 Eye Wash, 1/2 Oz.**
4 Triple Antibiotic Ointment Foil Packs (SF10058)
1 Burn Spray (SF10090)
100 Aspirin (SF10064)
1 Package Cotton, 1/2 Oz. (SF10045)
Kit Contents:
1 Bloodstopper Dressing (SF10029)
100 Plastic Strip Bandages, 1" x 3" (SF10011)
4 Rolls Non-Sterile Gauze Bandages, 2" x 4.1 Yd.
(SF10027)
1 Roll Tri-Cut Tape (SF10025)
15
items
kit
SF10001_Medium First Aid Kit
31
kit
SF10002_Large First Aid Kit
15" x 17" x 5-1/2"
15" x 22" x 5-1/2"
Kit Contents:
2 Bloodstopper Dressings (SF10029)
4 Rolls Non-Sterile Gauze Bandages, 2" x 4.1 Yd.
(SF10027)
50 Alcohol Wipes (SF10053)
Kit Contents:
2 Bloodstopper Dressings (SF10029)
25 Woven Strip Bandages, 2" x 3"*
100 Aypanal (non-aspirin) (SF10066)
250 Sinus Pain Formula**
250 Miralac Antacid (SF10075)
50 Alcohol Wipes (SF10053)
items
1 Roll Elastic Tape, 1" x 5 Yd. (SF10024)
1 Cohesive Bandage, 2" x 5 Yd. (SF10043)
2 Triangular Bandages, 36" x 36" x 51" (SF10039)
90 Cotton Tips, 3" (SF10047)
6 Tongue Blades (SF10110)
2 Biohazard Waste Bags (SF10115)
90 Cotton Tips, 3" (SF10047)
28
items
kit
6 Rolls Non-Sterile Gauze Bandages, 2" x 4.1 Yd. (SF10027)
90 Cotton Tip Applicators, 3/16" x 11/16" (SF10047)
35
items
Copyright © 2012 Kent Automotive. All rights reserved. Printed in USA (9/12) E1166USNP
Prices and offers are effective October 1 through December 31, 2012. Cannot be combined with any other offer and does not apply to prior purchases. Offers are not transferable and do not have
any cash value. Government entities, corporate accounts or public tax-supported institutions may not be eligible. Only available in USA. Subject to applicable laws and regulations.
Why Kent Automotive?
Simply put, it’s because we know the business. Anyone can deliver
products, Kent Automotive delivers performance. We work with you to
maximize your bottom line, provide superior technical support, and offer
shop-proven products, systems and training to accelerate your performance.
It’s what we do every day.
8770 W. Bryn Mawr Ave., Suite 900, Chicago, IL 60631-3515
Copyright © 2012 Kent Automotive. All rights reserved. Printed in USA (9/12) E1166USNP
Prices and offers are effective October 1 through December 31, 2012. Cannot be combined with any other offer and does not apply
to prior purchases. Offers are not transferable and do not have any cash value. Government entities, corporate accounts or public taxsupported institutions may not be eligible. Only available in USA and Canada. Subject to applicable laws and regulations.

kent-automotive.com • 888.YES.KENT (937.5368)

Transcription

Similar documents

Circus Circus Club Cal-Neva To

2009 Ukrops Monument Avenue 10k

Lasix List