Architectural Lighting

Transcription

Architectural Lighting
ARCHITEC
TUR
AL LIGHTING
ARCHITECTUR
TURAL
Architectural Lighting
Hydrel® was launched with
a mission: to make the most
reliable underwater lighting
the world has ever seen.
This was no small task, since
water is a hostile
environment for lighting.
But we accomplished it, and
in the ensuing decades as
we’ve moved up onto land,
the Company has continued
to build its expanding lines
of outdoor lighting products
the same way. Rugged.
Impenetrable. Uncommonly
reliable. One thing is certain:
Hydrel products are
engineered to outperform
our DNA, and customers
couldn’t be happier.
H YDREL
Wrigley Building
anything on the market. It is
592
www.hydrel.com
PSG9
“tough environment” lighting
company. It’s no wonder. We
earned our reputation the hard
way – under water. And we
excelled next with in-grade
solutions, where the surroundings
are only a fraction more hospitable.
The focus has been on night lights.
ARCHITEC
TUR
AL LIGHTING
ARCHITECTUR
TURAL
Hydrel has always been the
These high-performance systems
continue to define Hydrel,
Frost Bank
remaining at the heart of our
offering.
However, in recent years
architectural floodlights, accent
lights and specialized lighting
designs have brought Hydrel out
into full view. This leads us to the
next significant advance in
broadening our reputation – the
launch of a completely innovative
approach to site lighting design.
Our objective is to develop a
comprehensive range of outdoor
luminaires integrated by singular
LaReue Wynn Las Vegas
design signatures. As this concept
comes to life, architects and
lighting designers will be
equipped, for the first time, to
realize a high level of aesthetic
continuity across all segments of
site lighting.
H Y DREL
PSG9
www.hydrel.com
593
ARCHITEC
TUR
AL LIGHTING
ARCHITECTUR
TURAL
Introducing G2™ designs, multi-faceted
perimeter lighting that combines visual
appeal with the superior performance
and unequalled quality you expect from
Hydrel.
For more information about G2™
H YDREL
products, see pages 596-600.
594
www.hydrel.com
PSG9
www.hydrel.com
596
597
599
600
Floodlighting
601
Site Lighting
611
In-grade Lighting
614
Accent Lighting
623
Step Lighting
632
Border Lighting
635
Mounting
639
Underwater Lighting
644
H Y DREL
PSG9
G2™ Series
Building Mounted
Pole Mounted
Bollards
ARCHITEC
TUR
AL LIGHTING
ARCHITECTUR
TURAL
CONTENTS
595
G2™ Merging geometric shapes, elegantly formed.
HYDREL
ARCHITECTURAL SITE LIGHTING
G2™ Family
596
www.hydrel.com
PSG9
G2™ Family
The G2™ Block Series may be applied over entries, within entries, up or down, on all building sides or
in concert with G2™ Edge or G2™ Plate products. Lighting distributions are symmetric or asymmetric
and project in short, medium and long configurations.
Material
Distribution
Die-cast aluminum housing and
door. Fixture fully sealed with
silicone gasketing. All hardware for
door and mounting accessories are
stainless steel. Suitable for wet
locations.
Area: IES Type II, IES Type III, IES
Type IV, IES Type V.
Lamp
175W max. metal halide MAX. Other
lamp types available (see ordering guide).
Reflector
High purity anodized specular, semispecular or patterned lighting sheet
in various configurations providing
optimum optical performance.
Reflectors are interchangeable.
Reflectors include both segmented
and precision-formed types to
G2BD Block dome
G2BW Block wedge
Orientation
DN Down
UP Up
Integrally mounted. Rated for -20°C
starting temperatures.
Finish
Lens
Molded crowned tempered
borosilicate.
Polyester powder coated in
a range of textured or semi-matte
gray tone or earth tone colors.
Mounting
Listings
Surface mounted over recessed
junction box or conduit stub-out.
U.L., C.U.L., IP65, IES full cut-off,
suitable for wet locations.
Example: G2BD DN 150M 277 SR2 FLC OLS SF LPI DNAT
Lamp type
Metal halide
70M
100M
150M
175M
Ceramic metal halide
70CM
70CMT6
100CM
150CM
150CMT6
High pressure sodium
70S
150S
Fluorescent
26TRT
32TRT
42TRT
Voltage
120
208
240
277
347
120/277
MVOLT1
TB
Distribution
SR2
SR3
SR4SC
SR5S
Lens
IES Type II
IES Type III
IES Type IV
IES Type V
FLC
FLC5
Accessories
2
Internal
IBS Internal backlight
shield
OLS Obscuring lens
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
G2BD
7-1/2
(191)
7-3/4
(197)
7-1/4
(184)
5-7/8
(149)
R 6-1/8
(156)
12 Diameter
(305)
G2BW
8
(203)
8
(203)
8
(203)
5-3/4
(146)
Down (DN) orientation only.
12-1/4
(311)
PSG9
12-1/4
(311)
www.hydrel.com
Option
Photo control
PE Photo cell
Fusing
DF Double fuse3
SF Single fuse3
Ballast
GEB Generic
electronic
ballast4
MLEBAD Analog
dimming
ballast4,5
BLS Bi-level
switching6
Lamp
LPI Lamp
included
Finish
DBLB Designer black,
textured
DSPD Dark gray,
textured
DNAT Natural
aluminum,
textured
DWHG Designer white,
textured
DDBT Dark bronze,
textured
DSPF Rust, textured
DSST Sandstone,
textured
CF Custom finish
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
NOTES:
1 MVOLT is standard on all fluorescent and metal
halide lamps with electronic ballast option.
2 Accessories are mutually exclusive. Choose one.
3 SF only valid with 120V, 277V or 347V. DF only valid
with 208V or 240V.
4 Electronic ballasts only are available with metal
halide (150W max), fluorescent and MVOLT ballasts.
5 0-10V dimmer required (by others).
6 BLS only available for 175M and 150S.
Ballast
provide maximum performance and
uniformity. All HID sockets are
porcelain medium-base or G12
based, pulse rated for 4KV.
Ordering Information
Product
Building Mounted
ARCHITECTURAL SITE LIGHTING
G2™ Block
Intended Use
597
ARCHITECTURAL SITE LIGHTING
G2™ Family
™
Intended Use
G2 Edge
G2EDGE is uniquely suited for mounting to columns and mullions. Choice of small-scale dome or
wedge shaped enclosures house a wide range of high-performance optical systems for safe and
secure perimeter lighting, or accent or wallwash lighting effects.
Building Mounted
Material
Die-cast aluminum housing and
door. Fixture fully sealed with
silicone gasketing. All hardware for
door and mounting accessories are
stainless steel. Suitable for wet
locations.
IV, IES Type V. flood: narrow spot,
spot, flood, wide flood, wall wash.
based, pulse rated for 4KV.
Reflector
Molded crowned tempered
borosilicate.
Lens
High purity anodized specular, semispecular, or patterned lighting sheet
in various configurations providing
optimum optical performance.
Reflectors are interchangeable.
Reflectors include both segmented
and precision-formed types to
provide maximum performance and
uniformity. All HID sockets are
porcelain medium-base or G12
Lamp
175W max. metal halide MAX.
Other lamp types available.
Distribution
Surface mounting over recessed,
compact junction box or conduit
stub-out.
Listings
U.L., C.U.L., IP65, IES full cut-off,
suitable for wet locations.
Ballast
Integrally mounted. Ballasts are
100% factory tested,
Example: G2EW DN 150M 277 SR2 STD FLC OLS SF LPI DNAT
Product
Lamp type
Voltage
Mounting
Lens
Option
Metal halide
70M
100M
150M
175M
Ceramic metal halide
70CM
70CMT6
100CM
150CM
150CMT6
High pressure sodium
70S
150S
Fluorescent
26TRT
32TRT
42TRT
120
208
240
277
347
120/277
MVOLT1
TB
STD Standard for mounting
on stub out or 3” wide
or less junction box
E4S 4O or 4S junction box
cover
STDDE Standard direct entry
3/4” NPT
FLC
FLC5
Photo control
PE Photo cell
Fusing5
DF Double fuse
SF Single fuse
Ballast
GEB Generic electronic
ballast6
MLEBAD Analog dimming
ballast6,7
BLS Bi-level switching8
Orientation
Distribution
NSP
SP
FL
WFL
SR2
SR3
SR4SC
SR5S
WWD
Accessories
4
IBS Internal
backlight shield
OLS Obscuring lens
CFAMB Color filter
amber
CFBLU Color filter blue
CFGRN Color filter
green
CFRED Color filter red
Narrow spot2
Spot
Flood
Wide flood
IES Type II
IES Type III
IES Type IV
IES Type V
Wall wash3
G2EW
3-3/4
(95)
9/16
(14)
13-3/4
(349)
12-1/4
(311)
5-11/16
(144)
14
(356)
12-1/4
(311)
13-3/4
(349)
G2ED
9/16
(14)
HYDREL
Polyester powder coated in a range
of textured or semi-matte gray
tone or earth tone colors.
G2ED Edge dome
G2EW Edge wedge
DN Down
UP Up
598
Finish
Mounting
Area: IES Type II, IES Type III, IES Type
Ordering Information
and rated for -20°C starting
temperatures.
13-3/4
(349)
3-3/4
(95)
12-1/4
(311)
Lamp
LPI
Lamp
included
Finish
DBLB
Designer black,
textured
DSPD Dark gray, textured
DNAT Natural aluminum,
textured
DWHG Designer white,
textured
DDBT Dark bronze,
textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom finish
Optional two-tone finish
__/ GLS Gloss finish on
dome/wedge
__/ POL Polished finish
on dome/wedge9
NOTES:
1 MVOLT is standard on all fluorescent and metal halide lamps with electronic ballast option.
2 NSP only available with 70CMT6 and 150CMT6.
3 WWD includes 14” extended wall mount, consult factory.
4 Accessories are mutually exclusive. Choose one.
5 SF only valid with 120V, 277V, or 347V. DF only valid with 208V or 240V.
6 Electronic ballasts only are available with metal halide lamps, 150W max.
7 0-10V dimmer required (by others).
8 BLS only available for 175M and 150S.
9 Not available with G2EW.
5-9/16
(141)
13-3/4
(349)
www.hydrel.com
12-1/4 Diameter
(311)
Down (DN) orientation only.
PSG9
G2™ Family
Pole mounted dome or wedge shaped enclosures house a range of high-performance optical systems
for path, plaza and parking areas.
Pole Mounted
Material
Distribution
Lens
Finish
Die-cast aluminum housing and
door. Fixture fully sealed with
silicone gasketing. All hardware for
door and mounting accessories are
stainless steel. Suitable for wet
location.
Area: IES Type II, IES Type III, IES
Type IV, IES Type V.
Molded crowned tempered
borosilicate.
Reflector
Mounting
Polyester powder coated in a range
of textured or semi-matte gray
tone or earth tone colors.
High purity anodized specular, semispecular, or patterned lighting sheet
in various configurations providing
optimum optical performance.
Reflectors are interchangeable.
Segmented reflectors provide
maximum performance and
uniformity. All HID sockets are
porcelain medium-base or G12
based, pulse rated for 4KV.
Luminaire mounts to 4" square or 4"
round pole standard aluminum. A
custom 3-3/4" square design pole
with center line reveals also
available.
Weight
Ballast
Listings
High power factor magnetic ballast
standard. Electronic ballast also
available. Ballast rated for low
starting temperatures.
U.L., C.U.L., IP65, IES full cut-off,
suitable for wet locations.
Lamp
T-6, G12 to 150W; E-17 med. base to 175W.
Socket
G-12, medium-base or E27 base.
Ordering Information
Lamp type
Voltage
G2XD Xtend dome
G2XW Xtend wedge
Metal halide
70M
100M
150M
175M
Ceramic metal halide
70CM
70CMT6
150CM
150CMT6
High pressure sodium
70S
150S
Fluorescent
26DTT
32TRT
42TRT
120
208
220
240
277
347
120/277
MVOLT1
TB
Distribution
SR2
SR3
SR4SC
SR5S
IES Type II
IES Type III
IES Type IV
IES Type V
Mounting
SPA Square
pole
mount
RPA Round
pole
mount
1.45
Accessories2
Option
Lamp
IBS Internal
backlight
shield
OLS Obscuring
lens
Photo control
PE Photo cell
Fusing
DF Double fuse3
SF Single fuse3
Ballast
GEB Generic
electronic ballast4
MLEBAD Analog dimming
ballast4,5
BLS Bi-level
switching6
LPI Lamp
included
Front
3-3/4
(95)
Back
Back
7-3/4
(197)
7-3/4
(197)
14
(356)
12-3/4
(311)
Side
24
(609)
24
(609)
Note: see specification sheet for more detailed dimensions.
www.hydrel.com
Finish
DBLB Designer black,
textured
DSPD Dark gray, textured
DNAT Natural aluminum,
textured
DWHG Designer white,
textured
DDBT Dark bronze, textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom finish
Optional two-tone finishes
__/GLS Gloss finish on dome/
wedge
__/POL Polished finish on dome
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
G2XD
G2XW
Front
3-3/4
(95)
Side
PSG9
EPA
Example: G2XW 150M 277 SR2 SPA OLS SF LPI DNAT
Product
NOTES:
1 MVOLT is standard on all fluorescent or
metal halide lamps with electronic ballast option.
2 Accessories are mutually exclusive.
Choose one.
3 SF only valid with 120V, 277V, or 347V. DF
only valid with 208V or 240V.
4 Electronic ballasts only are available with
metal halide lamp types, 150W max.
5 0-10V dimmer required (by others).
6 BLS only available for 175M and 150S.
29.5 lbs.
ARCHITECTURAL SITE LIGHTING
G2™ Xtend
Intended Use
599
ARCHITECTURAL SITE LIGHTING
G2™ Family
™
G2 Louver Bollard
Intended Use
The G2™ Bollard Series is designed to work in building perimeter areas and public spaces completing
a wide variety of architectural styles. The G2™ Bollard fixture offers an unmatched impact-resistant
mounting and leveling design ensuring life-long performance.
Material
temperature.
Copper-free aluminum A360.
Light Options
Lamp
Choose between patent-pending LED
color wash or light wash. The LED
color wash option adds vibrant color
to the bollard and creates the
opportunity for customized
applications. The optional light wash
Fluorescent: 42W max., triple tube.
HID: 70W max. G12, 100W max. E17.
Ballast
Integrally mounted core and coil,
electronic ballast with low starting
Ordering Information
Fasteners
IES cutoff.
U.L., C.U.L., IP65, suitable for wet
locations.
Stainless steel.
Finish
Polyester powder coated in a range
of textured semi-matte.
Example: G2LBD 36 100M MVOLT SYM LEDBF LEDCWB DCT GEB LPIC DNAT
Lamp type
Voltage
Distribution
Light options – front4
Light options – back4
G2LBD
G2LBW
Metal halide2
70M
100M
Ceramic metal halide2
70CM
100CM
35CMT6
70CMT6
High pressure sodium2
50S
70S
100S
Fluorescent
26DTT
32TRT
42TRT
120
208
240
277
347
120/277
MVOLT3
TB
SYM Symmetric
FT Forward
throw
LWF Light wash front
LEDAF LED color wash,
amber front
LEDBF LED color wash,
blue front
LEDRF LED color wash,
red front
LEDCWF LED color wash,
cool white front
LEDWWF LED color wash,
warm white
front
LEDRYF LED color wash,
royal blue front
LWB Light wash back
LEDAB LED color wash,
amber back
LEDBB LED color wash,
blue back
LEDRB LED color wash,
green back
LEDCWB LED color wash,
cool white back
LEDWWB LED color wash,
warm white
back
LEDRYB LED color wash,
royal blue back
36
42
G2LBW
G2LBD
Light
center
height
36
(914)
or
30
(762)
41
(1041)
or
35
(889)
8
(203)
9
(229)
8
(203)
8
(203)
HYDREL
Listings
Product
Overall height1
600
reflector illuminates the bollard
base by redirecting light from main
lamp source.
4
(102)
9
(229)
41
(1041)
or
35.5
(902)
8
(203)
www.hydrel.com
4
(102)
Lamp11
Option
Control
DCT
Fusing
DF
SF
Ballast
GEB
Dual circuit5
LPI Lamp
included
Double fuse6
Single fuse7
LPIC Lamp
included
(coated)
Generic
electronic
ballast8
MLEBAD Electronic
dimming
ballast8,9
EL N SD Emergency
battery
backup self
diagnostic10
NOTES:
1 Bollard heights are nominal (shown in
inches).
2 All lamps (excluding 35CMT6 and 70CMT6)
are coated as recommended unless LPI is
specified.
3 MVOLT standard with fluorescent lamps
and metal halide lamps with electronic
ballast option.
4 Light options are mutually exclusive.
Choose one per side. For single circuit wiring, LED light option not available with
MVOLT or electronic ballast option operating at 277V, or with 347V. For DCT dual circuit
option, secondary LED voltage required to
be 120V (for primary voltages: 120V, 208V,
347V, MVOLT) or 240V (for primary voltages
240V or 277V).
5 DCT available with LED color wash option
only.
Finish
DBLB
Designer black,
textured
DSPD Dark gray, textured
DNAT Natural aluminum,
textured
DWHG Designer white,
textured
DDBT Dark bronze, textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom finish
_/PL Louvers to match12
6 SF available with 120V, 277V or 347V on HID
fixture only.
7 DF available with 208V or 240V on HID fixture only.
8 Electronic ballast options available with
metal halide lamps only.
9 0-10V remote analog dimmer system required (by others).
10 Available with fluorescent only.
11 LPIC recommended for E17 and ED17
lamps. Not available with fluorescent,
35CMT6 or 70CMT6HID lamps.
12 Standard louver finish: matte black top,
high gloss white bottom unless __/PL is
chosen. __/PL is not recommended for
DWHG white or other light color finishes
due to increased visible glare and reduced
fixture cutoff.
PSG9
Architectural Floodlight
7000
The 7000 Series floodlight is a compact, high-performance outdoor fixture used for façade and
landscape lighting.
Material
NOTE: All lamps must be rated for "Universal
Burning Position" because fixture tilt
changes lamp orientation.
provide maximum performance and
uniformity.
Weight
Die-cast aluminum housing
and door.
Lens
Socket
Electrical Components
EPA
Flat tempered glass.
Incandescent: mini-can screw base.
Fluorescent: 4-pin, GX24Q base. HID:
G-12, medium, or E27 base pulserated 4KV.
Integrally mounted ballasts rated for
low temperatures.
Lamp
Incandescent: T-4, mini-can to 100W.
Fluorescent: TRT triple-tube lamps to
42W. HID: T-6, G12 to 70W, E-17
medium-base to 70W; elliptical, E-27
to 80W.
Polyester powder coated in a range
of textured or semi-matte finishes.
U.L., C.U.L., IP65, suitable for wet
locations.
Stainless steel.
Example: 7000 70M 120 FL YM SMSA18 BD LPI BL
Product
Lamp type
Voltage
Distribution
Mounting
7000
Incandescent1
100Q
Fluorescent
26TRT
32TRT
42TRT
Metal halide
70M
100M
Ceramic metal halide
70CM
35CMT6
70CMT6
High pressure sodium
35S1
50S
70S
120
208
240
277
347
120/277
MVOLT2
TB
TSP Tight spot3
NHSP Narrow
horizontal
spot3
MFL Medium flood3
FL Flood4
KM Knuckle mount
YM Yoke mount
Mounting accessories
See page 610.
7000 KM
11-3/4
(298)
6
(153)
7000 YM
11-3/4
(298)
8-1/4
(210)
13-7/8
(353)
www.hydrel.com
Accessories
Internal
ISS Internal source shield5
IHL Internal honeycomb
louver6,7
CFAMB Color filter amber7
CFRED Color filter red7
CFBLU Color filter blue7
CFGRN Color filter green7
External8
BD Barn doors
GS Glare shield
Lamp
LPI Lamp
included
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
5-3/4
(146)
* Mounting not included.
PSG9
0.64
Fasteners
High purity anodized specular, semispecular or patterned lighting sheet
in various configurations designed to
Ordering Information
NOTES:
1 Available in 120V only.
2 MVOLT is the standard voltage for fluorescent lamps.
3 Available with T6 and T4 lamps only.
4 Available with E17 and TRT lamps only.
5 Available with TSP and MFL distributions
only.
6 Available with FL distribution only.
7 Not available with NHSP.
8 Accessories are mutually exclusive.
Choose one.
20 lbs.
Listings
Finish
Reflector
FL
OODLIGHTING
FLOODLIGHTING
Intended Use
601
FL
OODLIGHTING
FLOODLIGHTING
Architectural Floodlight
Intended Use
7100
The 7100 Series floodlight is a compact, high-performance outdoor fixture used for façade and
landscape lighting.
Material
Socket
Mounting
Finish
Die-cast aluminum housing and door.
Incandescent: recessed single contact
(RSC), minican screw base. HID: G-12,
medium or E27 base pulse-rated 4KV.
Knuckle or yoke mounted (180°
vertical, 360° rotation); fixed
mounted for ceiling or wall. Knuckle
mount: die-cast aluminum with 3/4"
NPT galvanized nipple standard.
Yoke mount: aluminum with 10 ft of
18-3 STW flexible cord polymer
yoke mount caps are black finish.
Polyester powder coated in a range
of textured or semi-matte finishes.
Lamp
Incandescent: T-3, RSC Quartz to
500W, T-4, minican to 250W. HID: T6, G12 to 150W, E-17 medium-base
to175W; elliptical, E-27 to 150 W.
Reflector
High purity anodized specular, semispecular, patterned lighting sheet in
various configurations designed to
provide maximum performance and
uniformity.
NOTE: All lamps must be rated for “Universal
Burning Position” because fixture tilt
changes lamp orientation.
Integrally mounted ballasts rated
for low starting temp.
Flat tempered glass standard.
37 lbs.
1.27
Listings
Example: 7100 150M 120 VFL KM WMSA BD SF LPI BL
Product
Lamp type
Voltage
7100
Incandescent
250Q
300Q
400Q
500Q
Metal halide
70M
100M
150M
175M
Ceramic metal halide
70CM
100CM
70CMT6
150CMT6
70CMTD
150CMTD
High pressure sodium
70S
100S
150S
120
208
240
277
347
120/277
TB
Mounting
KM
YM
CM
WMS
Knuckle mount
Yoke mount
Ceiling mount3
Wall mount
side3
WUS Wall mount
side up3
Distribution
NSP
NHSP
SP
HSP
HFL
VFL
WFL
Option
Lamp
Fusing
SF Single fuse7
DF Double fuse8
Photo control
PE Photo cell
Re-strike
QRS Quartz emergency
re-strike9
LPI Lamp
included
Mounting accessories
See page 610.
Accessories
Narrow spot1
Narrow horizontal spot2
Spot
Horizontal spot
Horizontal flood2
Vertical flood
Wide flood
Internal
ISS
CFAMB
CFRED
CFBLU
CFGRN
External5
BD
GS
LC
7100 KM
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Internal source shield4
Color filter amber
Color filter red
Color filter blue
Color filter green
Barn doors
Glare shield6
Polycarbonate cover6
7100 YM
15-3/4
(400)
15-3/4
(400)
6-3/4
(171)
6-3/4
(171)
HYDREL
Weight
U.L., C.U.L., IP65, suitable for wet
locations.
Ordering Information
602
Stainless steel.
EPA
Electrical Components
Lens
Fasteners
16-1/2
(419)
13-1/4
(337)
9-1/4
(235)
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
NOTES:
1 Available with 70CMT6, 150CMT6 and 250Q
lamps only.
2 Not available with RSC base lamps.
3 Not available with mounting accessories.
4 Not available with VFL or WFL distributions.
5 Accessories are mutually exclusive.
Choose one.
6 Not available with CM mounting.
7 Available with 120V, 277V or 347 HID only.
8 Available with 208V or 240V HID only.
9 Not available with NSP, WFL and HSP distribution.
* Mounting not included.
18-1/2
(470)
www.hydrel.com
PSG9
Architectural Floodlight
7200
The 7200 Series floodlight is a high-performance fixture used for façade and area lighting.
400W max.
Material
Reflector
Lens
of textured semi-matte finishes.
Die-cast aluminum housing
and door.
High purity anodized specular, semispecular, or patterned lighting sheet
in various configurations designed to
provide optimum optical
performance. Reflectors are
interchangeable using four screws
and quick-release electrical
connectors (with the exception of
spot reflectors). Reflectors include
both segmented and hydroformed
types to provide maximum
performance and uniformity.
Flat tempered glass.
Fasteners
Mounting
Stainless steel.
Knuckle or yoke mounted (180°
vertical, 360° rotation) on pole,
stanchion, wall or tenons.
Weight
Electrical Components
EPA
Integrally mounted ballasts rated for
low temperatures.
3.00
Listings
Finish
U.L., C.U.L., IP65, suitable for wet
locations.
Lamp
HID to 400W.
NOTE: All lamps must be rated for “Universal
Burning Position” because fixture tilt
changes lamp orientation.
Socket
Porcelain mogul base rated 5KV.
50 lbs.
Polyester powder coated in a range
Ordering Information
Product
7200
Example: 7200 400M 277 WFL KM EWM24 GS LPI BZ
Voltage
Mounting
120
208
240
277
347
120/277
TB
KM Knuckle
mount
YM Yoke
mount
Lamp type
Distribution
Metal halide
200M1,2
250M
320M1
350M1,2
400M
High pressure sodium
250S
400S
SP Spot
HSP Horizontal spot
NHSP Narrow
horizontal spot
HFL Horizontal flood
VFL Vertical flood
WFL Wide flood
Mounting accessories
See page 610.
7200 KM
Accessories
Options
Internal
ISS Internal source
shield3
CFAMB Color filter amber
CFRED Color filter red
CFBLU Color filter blue
CFGRN Color filter green
External4
BD Barn doors
GS Glare shield
LC Polycarbonate cover
EGL Ext. grid louver5
FGS Full glare shield
23-3/8
(594)
10-3/8
(264)
PSG9
23
(584)
7200 YM
23-3/8
(594)
10-3/8
(264)
14-7/16
(367)
10-1/2
(267)
www.hydrel.com
SF
DF
PER
QRS
6
Single fuse
Double fuse7
Photo cell receptacle8
Quartz emergency restrike ballast9
CWA Constant wattage
ballast10
SCWA Super CWA pulse start11
Lamp
LPI Lamp
included
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
14-7/16
(367)
NOTES:
1 Available only with SCWA ballast.
2 200M and 350M are not available with SP
distribution.
3 Not available with WFL distribution.
4 Accessories are mutually exclusive.
Choose one.
5 EGL accessory available in matte black finish only.
6 Available with 120V , 277V or 347V HID only.
7 Available with 208V, 240V or 480V HID only.
8 NEMA twist lock receptacle only, photo
control by others and requires mounting
accessory.
9 Not available with TBV, NHSP, SP, WFL or
HSP.
10 Available only with 250M or 400M.
11 Available only with 200M, 250M, 320M,
350Mor400M.
FL
OODLIGHTING
FLOODLIGHTING
Intended Use
603
FL
OODLIGHTING
FLOODLIGHTING
Architectural Floodlight
Intended Use
7200
The 7200 Series flood is designed for use in façade and area lighting.
1000W
Material
Reflector
Lens
Fasteners
Die-cast aluminum housing and door.
High purity anodized specular, semispecular or patterned lighting sheet
in various configurations to provide
optimum optical performance.
Reflectors are interchangeable using
four screws and quick-release
electrical connectors (with the
exception of spot reflectors.)
Reflectors include both segmented
and hydroformed types to provide
maximum performance and
uniformity.
Flat tempered glass.
Stainless steel.
Electrical Components
Weight
Externally mounted ballasts rated
for low starting temp. Ballast box
must be specified.
40 lbs. – Head only, does not include
ballast.
Finish
3.00
Polyester powder coated in a range
of textured or semi-matte finishes.
Listings
Lamp
HID to 1000W.
NOTE: All lamps must be rated for “Universal
Burning Position” because fixture tilt
changes lamp orientation.
Socket
Porcelain mogul base rated 5KV.
Ordering Information
EPA
U.L., C.U.L., IP65, suitable for wet
locations.
Example: 7200 1000M 120 VFL KM SMB GS LPI BZ
Product
Lamp type
Voltage
Mounting
7200
1000M
1000S
120
208
240
277
347
120/277
TB
TBV
KM Knuckle mount
YM Yoke mount
Ballast mounting accessories1
SMB
SMBEWM
Distribution
SMBPMT
SMBSMSA
SP Spot
HSP Horizontal spot
NHSP Narrow
horizontal spot
HFL Horizontal flood
VFL Vertical flood
WFL Wide flood
SMBSMT
SMBTNM
Surface mounted
ballast
SMB extended wall
mount
Pole mount tee2
SMB stanchion
mount
SMB stanchion
mount tee2
SMB tenon mount3
Accessories
Options
Lamp
Internal
ISS Internal source
shield4
External5
BD Barn doors
GS Glare shield
EGL Ext. grid louver6
FGS Full glare shield
Fusing
SF Single fuse7
DF Double fuse8
Photo control
PER Photo cell
receptacle9
Re-strike
QRS Quartz emergency
re-strike ballast10
Ballast
CWA Constant wattage
ballast11
LPI Lamp
included
For futher information, see page 641.
7200 KM
7200 YM
23-3/8
(594)
23-3/8
(594)
10-3/8
(264)
HYDREL
10-3/8
(264)
604
14-7/16
(367)
23
(584)
14-7/16
(367)
10-1/2
(267)
www.hydrel.com
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
NOTES:
1 If not selected, fixture will ship less ballast.
2 Two fixtures per mount.
3 For use with KM only.
4 Not available with WFL distribution.
5 Accessories are mutually exclusive.
Choose one.
6 EGL available in matte black finish only.
7 Available with 120V, 277V or 347V only.
8 Available with 208V, 240V or 347V only.
9 NEMA twist lock receptacle only, photo
control by others.
10 Not available with TBV, NHSP, SP, WFL or
HSP distribution.
11 Available with 1000M only.
PSG9
Architectural Flood Accessories
2-3/8
(60)
2-3/8
(60)
11-3/4
(298)
11-3/4
(298)
6
(153)
6
(153)
BD Barn doors
4
(102)
22-13/16
(580)
GS Glare shield
15-3/4
(400)
15-3/4
(400)
15-3/4
(400)
9-3/4
(235)
9-3/4
(235)
9-3/4
(235)
GS Glare shield
LC Polycarbonate cover
7200
5-38
(137)
2-5/8
(67)
16-3/4
(425)
252
10
14
(354)
11-3/8
(289)
22-13/16
(580)
4
(102)
22-13/16
(580)
5-38
(137)
10
(252)
14
(354)
LC Lexan covers
GS Glare shield
www.hydrel.com
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
EGL Eternal grid louver
BD Barn door
PSG9
7100
1-3/4
(45)
4
(102)
BD Barn door
FL
OODLIGHTING
FLOODLIGHTING
7000
605
FL
OODLIGHTING
FLOODLIGHTING
Performance Floodlight
Intended Use
8100
The 8100 Series is a high-performance compact precision lighting system that provides consistent
styling with a variety of light distributions. Multiple optical systems provide a wide range of
precise light control. For use in façade, area and pathway lighting.
Material
Lens
Die-cast, copper-free aluminum
(A360) housing and doors.
Flat tempered glass for maximum
resistance to impact and thermal
shock.
Lamp
Mounting
ED-17 medium-base to 175W, T6 G12
base to 150W, Quartz T4 mini-can
base to 250W.
AWM: cast aluminum wall mount
plate for mounting over 4-0/4-S
recessed J-Box. AWMDE: surface
conduit direct entry available for
through-branch wiring, 3/4" NPT
drilling standard. PM: steel mounting
plates for attachment to pole using a
unique block/receiver assembly. The
block bolts to a pole and engages the
receiver within the 8100 integral arm.
Reflector
High purity anodized specular, semispecular or patterned lighting sheet
in various configurations to provide
optimum optical performance and
uniformity.
Ordering Information
A single threaded locking fastener
secures the fixture to pole. YM: 1-1/
2" wide aluminum yoke, 15° up/down
adjustment and stainless steel locking
hardware allows fixture head to
easily be aimed and fixed in place.
Fixtures are provided with a
minimum of 10 ft of 18/3 ST-W cord
for power supply.
Finish
Ballast
Listings
High power factor magnetic core
and coil standard. Electronic ballast
optional.
U.L., C.U.L., IP67.
Product
Lamp type
Voltage
Mounting
8100
Incandescent
100Q
150Q
250Q
Fluorescent1
42TRT
2/42TRT
Metal halide
50M
70M
100M
150M
175M
Ceramic metal halide
70CM
100CM
70CMT6
150CMT6
High pressure sodium
50S
100S
150S
120
208
240
277
347
120/277
TB
MVOLT2
AWM Adj. wall mount
AWMDE Adj. wall mount,
direct entry
YM Yoke mount
PMEF Pole mount flat,
square pole
PME3 Pole mount 3"
diameter, round pole
PME4 Pole mount 4"
diameter, round pole
Distribution
Floodlights3
NSP Narrow spot4
SP Spot
NFL Narrow flood
MFL Medium
flood
FL Flood
WFL Wide flood
VWFL Vertical wide
flood5
Area lights
SR2 IES Type II
SR3 IES Type III
SR4SC IES Type IV
SR5S IES Type V
Accessories
Internal
ISS Internal source
shield6
LSF Linear spread filter
VSF Vertical spread
filter
CFAMB Color filter amber
CFRED Color filter red
CFBLU Color filter blue
CFGRN Color filter green
External7
Mounting accessories
BD Barn doors
See page 610.
FGS Full glare shield
HGS Half glare shield
HS House side shield8
WRG Wire rock guard
8100 AWM/AWMDE
10
(254)
14-3/4
(375)
5-1/8
(130)
D.E. (direct entry)
8-1/8
(206)
D.E. (direct entry)
8100 YM
HYDREL
EPA
1.41
Weight
26.5 max.
Example: 8100 150M 120 VWFL YM SMSA18 BD LPI BL
5-1/8
(130)
606
Textured TGIC powder coat
polyester finish.
10-1/8
(130)
10
(254)
14-1/16
(357)
8100 PM
8-1/8
(206)
10
(254)
8
)
www.hydrel.com
17-1/4
(438)
12-1/4
(311)
Options
Lamp
Photo control
PE Photo cell9
Fusing
SF Single fuse10
DF Double fuse11
Ballast
GEB Generic electronic
ballast12
MLEBAD Electronic analog
dimming12, 13
EL N Battery backup (for
(2) 42TRT only)5
EL N ICE Battery backup for
operation in low
temperature
conditions (for (2)
42TRT only)5
LPI Lamp
included
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
NOTES:
1 Fluorescent lamps only available with flood (FL) distribution.
2 MVOLT is standard on all fluorescent lamps (unless ELN selected) and metal halide lamps with GEB or MLEBAD option.
3 Flood distributions are not available with PMEF, PME3 or PME4.
4 Available for G12 and mini-can bases only. NSP = spot distribution with ISS.
5 Only available with 2/42TRT.
6 Not available with SR2, SR3, SR5, standard on NSP and SR4SC.
7 Accessories are mutually exclusive. Choose one.
8 HS only available with SR2 and SR3 distributions and not available with yoke mount.
9 PE not available with yoke mount.
10 SF is available with 120V, 277V or 347V on HID only.
11 DF is available with 208V, 220V or 240V on HID only.
12 Electronic ballast only are available with metal halide lamps
150W max. and MVOLT voltage.
13 0-10V dimmer not included.
PSG9
Performance Floodlight
8100
The 8100 EO Series is a high-performance emergency compact fluorescent lighting system.
Recommended applications: Areas along the path of egress, educational, athletic fields, health care
and commercial facilities needing standby of emergency illumination. For use in façade, area and
pathway lighting.
Operation
(A360) housing and doors.
When the normal supply of AC
power fails, the 8100 EO instantly
switches to the emergency mode,
keeping two compact fluorescent
lamps illuminated for a minimum of
90 minutes at full output. When AC
power is restored the emergency
system returns to the normal mode.
Ambient temperature -20°C to + 55°C
with ICE option.
Lamp
Material
Die-cast, copper-free aluminum
Two 42W Gx24q-4 base compact
fluorescent lamps.
Mounting
YM: 1-1/2" wide aluminum yoke and
stainless steel locking hardware
allows fixture head to easily be aimed
and fixed in place. Fixtures are
provided with a minimum of 10 ft of
18/3 ST-W cord for power supply.
AWM: cast aluminum wall mount
plate for mounting over 4-0/4-S
Emergency Only
recessed J-Box. 15° up/down
adjustment. AWMDE: surface conduit
direct entry available for throughbranch wiring, 3/4" NPT drilling
standard. PM: steel mounting plates
for attachment to pole using a
unique block/receiver assembly. The
block bolts to a pole and engages the
receiver within the 8100 integral arm.
A single threaded locking fastener
secures the fixture to pole.
Total Lumen Output
EPA
6400 lumens.
1.5
Test Switch
Finish
Single pole.
Textured TGIC powder coat
polyester finish.
Illumination Time
Input Voltage
Charging Indicator Light
Listings
LED.
U.L., C.U.L., IP67.
Recharge Time
24 Hours.
120V or 277V, 60Hz.
90 minutes.
Ordering Information
Example: 8100 EO 2/42TRT 120 FL YM LPI BL
Product
Emergency
Lamp type
Voltage
8100
EO
Fluorescent
2/42TRT
120
277
Distribution
FL Flood
Mounting
accessories
Mounting
AWM
Adj. wall
mount
AWMDE Adj. wall
mount, direct
entry
YM Yoke mount
PME3 Pole mount 3"
diameter,
round pole
PME4 Pole mount 4"
diameter,
round pole
See page 610.
Options
Lamp
ICE For low
ambient
conditions
RTSW Remote test
switch
LPI Lamp
included
AWM
10
(254)
14-3/4
(375)
5-1/8
(130)
D.E. (direct entry)
YM
PM
10-1/8
(130)
10
(254)
14-1/16
(357)
10
(254)
5-1/8
(130)
www.hydrel.com
17-1/4
(438)
12-1/4
(311)
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
NOTES:
OPERATION: When the normal supply of AC
power fails, the 8100 EO instantly switches to
the emergency mode, keeping two compact
fluorescent lamps illuminated for a minimum
of 90 minutes. When AC power is restored,
the emergency system returns to the normal
mode. Ambient temperature -20°C to + 55°C
with optional ICE technology. See
www.hydrel.com for EO/AC options.
PSG9
FL
OODLIGHTING
FLOODLIGHTING
Intended Use
607
FL
OODLIGHTING
FLOODLIGHTING
Performance Floodlight
Intended Use
8200
The 8200 Series is a high-performance precision lighting system that provides consistent styling with
a variety of light distributions. Multiple optical systems provide a wide range of precise light control.
For use in façade, area and pathway lighting.
Material
Lens
Die-cast, copper-free aluminum
(A360) housing and doors.
Flat tempered glass for maximum
resistance to impact and thermal shock.
Lamp
Mounting
ED18, ED28 or T15 HID to 400-watt
maximum. Mogul or E40 sockets.
AWM: Cast aluminum wall mount
plate for mounting over 4-0/4-S
recessed J-Box. 15° up/down
adjustment. AWMDE: Surface conduit
direct entry available for throughbranch wiring, 3/4" NPT drilling
standard. PM: Steel mounting plates
for attachment to pole using a unique
block/receiver assembly. The block
bolts to a pole and engages the
Reflector
High purity anodized specular, semispecular or patterned lighting sheet
in various configurations to provide
optimum optical performance and
uniformity.
receiver within the 8200 integral arm.
A single threaded locking fastener
secures the fixture to the pole. YM: 1-1/
2" wide aluminum yoke and stainless
steel locking hardware allows fixture
head to be easily aimed and fixed in
place. Fixtures are provided with a
minimum of 10 ft of 18/3 ST-W cord
for power supply.
High power factor magnetic core and
coil standard. Electronic ballast
optional.
Product
Lamp type
Voltage
Distribution
8200
Metal halide
200M1
250M
250MT1,2
320M1
320MT1,2
350M1
350MT1,2
400ME
400MT1,2
High pressure sodium
250S
400S
120
208
240
277
347
120/277
TB
MVOLT3
Floodlights4
SP Spot
NFL Narrow flood
MFL Medium flood
FL Flood
WFL Wide flood
HSP Horizontal spot
VFL Vertical flood
HFL Horzontal flood
Area lights
SR2 IES Type II
SR3 IES Type III
SR4SC IES Type IV
SR5S IES Type V
Mounting
Accessories
1.45
Weight
Listings
U.L., C.U.L., IP67.
Adj. wall
mount
AWMDE Adj. wall
mount, direct
entry
YM Yoke mount
PMEF Pole mount
flat, square
pole
PME3 Pole mount
3" diameter,
round pole
PME4 Pole mount
4" diameter,
round pole
20-3/4
(527)
D.E. (direct entry)
13-1/2
(343)
5-1/8
(130)
D.E. (direct entry)
YM
7-3/8
(187)
PM
13-1/2
(206)
15-1/2
(394)
20-1/16
(527)
7-3/8
(187)
www.hydrel.com
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
Options
5-1/8
(130)
15
(394)
LPI Lamp included
Photo control
PE Photo cell
Fusing
SF Single fuse8
DF Double fuse9
Ballast
GEB Generic electronic ballast10
SCWA Super CWA pulse start11
AWM
15-1/2
(349)
Lamp
Internal
ISS Internal source
shield5
CFAMB Color filter amber
CFRED Color filter red
CFBLU Color filter blue
CFGRN Color filter green
External6
BD Barn doors
FGS Full glare shield
HGS Half glare shield
HS House side shield7
WRG Wire rock guard
AWM
Mounting accessories
HYDREL
EPA
Example: 8200 250M 120 SR2 AWM HS LPI SND
See page 610.
608
Textured TGIC powder coat
polyester finish (see ordering guide
for available colors).
29.5 max.
Ballast
Ordering Information
Finish
22-3/4
(578)
17-3/4
(311)
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
WH White
CF Custom
NOTES:
1 SCWA required with 200M, 320M, 350M, 250MT, 320MT,
350MT and 400MT lamps.
2 T15 lamps not available with HSP, HFL, and VFL.
3 MVOLT for 250M-400M is 208-277V only.
4 Flood distributions not available with PMEF, PME3 and
PME4 mountings.
5 ISS comes standard on the VFL and SR4SC distributions. ISS is not available with FL, HFL, WFL, SR2, SR3
and SR5S distributions.
6 Accessories are mutually exclusive. Choose one.
7 HS available with SR2 and SR3 distributions only.
8 SF is available with 120V, 277V or 347V on HID only.
9 DF is available with 208V, 220V or 240V on HID only.
10 Electronic ballasts are only available with metal halide
lamps 250 – 400W, 208-277V only.
11 SCWA ballasts are only available with metal halide lamps.
PSG9
Performance Floodlight Accessories
BD
Barn doors
Four door set, each door mounts
independently.
HS
House side shield
Cuts nuisance glare.
FGS
Accessories
Full glare shield
360° full cutoff.
ISS
Internal source shield
Eliminates lamp source glare.
HGS
Half glare shield
Cuts upward glare.
WRG
FL
OODLIGHTING
FLOODLIGHTING
All Hydrel accessories are manufactured using the highest quality materials.
Wire guard
Additional safety protection.
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
PSG9
www.hydrel.com
609
PATS Pole arm twin square1,2
■
■
■
■
■1
■1
■1
■1
■
■
■
■
■
■
■1
■1
■
■
■
■
■
■
■
■
■
■
■
■1
■1
■1
■1
■
■
■1
■1
■
■
■
■
■
■
■
■
■1
■1
■1
■1
SMBR SMB remote mount
PATR Pole arm twin round2
■
■
SMBTNM SMB tenon mount
PAS Pole arm square2
■
■
SMBPMT SMB pole mount tee
PAR Pole arm round2
■
■
SMBSMT SMB stanchion tee mount
EWM Extended wall mount2
■1
■1
SMBSMSA SMB stanchion mount
TRJB Tree mount junction box
■
■
SMBEWM SMB extended wall mount
SMSA Stanchion mount2
■
■
SMB SMB ballast1
PMT Pole mount tee
■
■
TNM Tenon mount
PMSA Pole mount
HYDSMDB Stanchion mount direct burial
FJB Flush mount junction box
7000 Series
Adjustable
KM
Knuckle Mount
YM
Yoke Mount
7100 Series
Adjustable
KM
Knuckle Mount
YM
Yoke Mount
Fixed
WMS/WUS
Wall Mount Side Down/Up
CM
Ceiling Mount
7200 Series
400-watt
Adjustable
KM
Knuckle Mount
YM
Yoke Mount
7200 Series
1000-watt
Adjustable
KM
Knuckle Mount
YM
Yoke Mount
8100 Series
Adjustable
YM
Yoke Mount
AWM/AWMDE
Adjustable Wall Mount
Fixed
PMEF, PME3, PME4
Pole Mount
8200 Series
Adjustable
Yoke Mount
YM
AWM/AWMDE
Adjustable Wall Mount
Fixed
PMEF, PME3, PME4
Pole Mount
ARJB Architectural junction box
Flood M
oun
ting
Moun
ounting
O ptions
No mounting accessories available
FL
OODLIGHTING
FLOODLIGHTING
Architectural & Performance Flood Mounting
■
■
■
■
■
■
■1
■1
■1
■1
■
■
■
■
■
■
■
■
■
■
■
■1
■
■
■1
■
■
■
■
■
■
■
■
■1
■1
■
■
■
■1
■1
■
■
■
■
■
HYDREL
NOTES:
1 Two fixtures per mounting.
2 Multiple lengths available, consult specification sheets.
610
www.hydrel.com
PSG9
Building Mounted
HP3
Ideal for schools, parking garages, walkways, airports and stadiums.
Housing
Lens, Door
Lamp
Mounting
One-piece aluminum die-casting
having knockouts for 4-0 box entry or
independent surface mounting
integrated. Accessories include a cast
aluminum splice box for direct
conduit entry. This unit also is
suitable for pole-, pendant- or basemounted applications.
Molded from clear, UV stabilized
polycarbonate for maximum impact
resistance. The lens door seals with
silicone gaskets providing bug and
water tightness. The door is affixed to
the housing with four stainless steel
tamper-proof fasteners.
Metal halide or high pressure
sodium to 150W max.
To surface mount over recessed 4-0
box, or with recessed post, base or
direct conduit. Also available as
pendant mounted.
Socket
Medium screw base.
Listings
Ballast
Magnetic, high power factor
minimum starting temperature is
-20°F (-29°C).
U.L., CSA, suitable for wet locations.
Ordering Information
Product
HP3
Lamp type
Metal halide
50M
70M
100M
150M 1
High pressure sodium
50S
70S
100S
150S1
Example: HP3 150M 120 HFW SDE SF LPI BL
Distribution
Voltage
120
208
240
277
347
120/277
TB
TBV
HFW
LHW
LFW
LLW
LRW
HSC
HNC
HAC
Mounting
High forward
wall
Low horizontal
wall
Low forward wall
Low left wall
Low right wall
High
symmetrical
ceiling
High narrow
ceiling
High
asymmetrical
ceiling
Options
BMS Base mount, single
PFD Plaster frame, direct
entry
PFS Plaster frame, splice
box
PMS Pole, single
RDE Recessed, direct
entry
RSB Recessed, splice box
SDE Surface, direct entry
SNB Surface, no box
SPM Pendant, single
SSB Surface, splice box
Single fuse2
SF
DF Double fuse3
PER Photo control
receptacle1,4
QRS Quartz
emergency
restrike
2 1/4 (57)
PSG9
11-3/8
(288)
7
(177)
6-1/4
(159)
Recessed
4-0 box
(by others)
For dimensions on other mounting options, see www.hydrel.com
www.hydrel.com
LPI Lamp
included
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Two (2) 1/4” mounting holes for wall
anchor bolts (bolts by others)
9
(228)
Lamp
Cast knockouts for
4-0 box mounting
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
12-3/8
(313)
NOTES:
1 Not available with RSB and RDE mounting.
2 SF only available with 120V, 277V or 347 V,
HID only.
3 DF is available with 208V or 240V, HID only.
4 NEMA twist-lock receptacle only. Photo
control by others.
SITE LIGHTING
Intended Use
611
SITE LIGHTING
Building Mounted
Intended Use
HP4
Ideal for schools, parking garages, walkways, airports and stadiums.
Housing
Lamp
Lens
One piece, aluminum die-cast
housing with integral knockouts for 40 box entry or independent surface
mounting. Accessories include cast
aluminum splice box for direct
conduit entry. This unit also is
suitable for pole-, post-, pendant- or
base-mounted applications.
Metal halide or high pressure
sodium to 250W max.
Unit is provided with a vandalresistant prismatic lens door. This
clear polycarbonate lens creates a
180° lateral spread. Flat polycarbonate or tempered glass lens also
available. The door seals with silicone
gaskets preventing water or bug
entry. Two tamper-proof fasteners
Socket
Mogul screw base.
Ballast
Magnetic high power factor. Starting
temperature is -20°F (-29°C).
Ordering Information
Product
HP4
hinge on stainless steel hardware.
The door is easily removed for easy
installation, maintenance and
relamping.
Listings
U.L., CSA, suitable for wet locations.
Example: HP4 250M 120 SNB SF LPI BL
Lamp type
Voltage
Metal halide
175M
200M1,2
250M 1
High pressure sodium
100S
150S
250S1
120
208
240
277
347
120/277
TB
TBV
Mounting
Optional lenses3
FLG Flat lens
tempered glass4
FLP Flat lens
polycarbonate5
BMS
PMS
RSB
SNB
SPM
SSB
Base mount, single
Pole mount, single
Recessed, splice box
Surface, no box
Pendant, single
Surface, splice box
Options
Lamp
SF Single fuse6
DF Double fuse7
PER Photo cell
receptacle1,8
QRS Quartz re-strike
SCWA Super constant
wattage ballast9
LPI Lamp
included
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
16-3/8
(415)
Four (4) 1/4” mounting
holes for wall anchor bolts
(bolts by others)
12
(304)
11-3/8
(288)
3-5/8 (92)
HYDREL
15-5/8
(397)
612
Recessed
4-0 box
(by others)
6-7/8
(112)
For dimensions on other mounting options, see www.hydrel.com
www.hydrel.com
Cast knockouts for
4-0 box mountings
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
NOTES:
1 Not available with RSB mounting.
2 Requires SCWA ballast.
3 Will be used in place of standard lens.
4 175W maximum, reflector is not adjustable with this lens.
5 150W maximum, reflector is not adjustable with this lens.
6 SF only is available with 120V, 277V or 347V
on HID only.
7 DF only is available with 208V or 240V on
HID only.
8 NEMA twist-lock receptacle only. Photo
control by others.
9 Only available on metal halide lamps.
PSG9
Bollard
3110
3120
3130
3140
The 3100 Series bollard is a low-level area lighting luminaire, for use in walkways, plazas or
pedestrian areas.
Material
Copper-free aluminum A360.
E17/elliptical
Low pressure sodium: T16, BY22d base.
Lamp
Voltage
Fluorescent: 42W max. Triple tube.
HID: 70W max. G12, 100W max.
See ordering guide.
Ballast
Fasteners
Integrally mounted core and coil
electronic ballast with low starting
temperature.
Stainless steel.
Listings
U.L., C.U.L., IP65, suitable for wet
locations.
Ordering Information
Example: 3130 36 100M MVOLT SYM GEB LPIC DNA
Product
Overall height
Lamp type
Voltage
Distribution
3110
3120
3130
3140
36
42
Incandescent
100I
Fluorescent
26DTT
32TRT
42TRT
Metal halide
50M
70M
100M
Ceramic metal halide
35CMT4
70CMT4
35CMT6
70CMT6
High pressure sodium
50S
70S
100S
Low pressure sodium
18L
35L
120
208
240
277
347
120/277
MVOLT1
TB
SYM Symmetric
FT Forward
throw
3110
Options
Fusing
SF
DF
Ballast
GEB
MLEBAD
GFCI
EL N
Lamp
LPI Lamp
included
LPIC Lamp
included
(coated)5
Single fuse2
Double fuse2
Generic electronic ballast3
Electronic dimming ballast4
Receptacle
Emergency battery backup
(fluorescent lamp only), half
output
EL H Emergency battery backup
(fluorescent lamp only), full
output
3120
3130
Top
Top
8
8
9" Dia.
9" Dia.
8
8
41-1/2
(1054)
41-1/2
(1054)
6
(152)
2-5/8 (66.7)
6
(152)
2-5/8 (66.7)
2-5/8 (66.7)
2-5/8 (66.7)
8
(203)
41
(1041)
41
(1041)
6
(152)
6
(152)
8
(203)
8
(203)
www.hydrel.com
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
3140
Top
NOTES:
1 MVOLT is standard on all fluorescent
lamps or metal halide lamps with GEB or
electronic ballasts.
2 SF only valid with 120V, 277V or 347V. DF
only valid with 208V or 240V.
3 Only available with metal halide lamps
and MVOLT voltage.
4 0-10V dimmer not included by others.
5 LPIC only valid with 50M, 70M, 100M, 50S,
70S, 100S, 100I.
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
8
(203)
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
Top
PSG9
SITE LIGHTING
Intended Use
613
INGR
ADE LIGHTING
IN-GR
GRADE
Performance In-grade
Intended Use
9000
The 9000 Series fixtures represent the state-of-the-art in flush uplight construction. These multipurpose modular units are designed for flush mounting in planting areas or in concrete, and are
used for illuminating building façades, walls, trees and similar applications.
Door Material
resistant for use in all types of
environments.
Cast aluminum or cast bronze that
locks the lamp housing into the
rough-in section with two tamperproof fasteners.
Lamp Module Housing
Stainless steel, sealed and purged of
all moisture to 100°F (38°C).
Electrical access to lamp module is
done through submersible rated
connector. Thermally protected.
Rough-In Section
Injection molded ABS, U.V.
stabilized, impact and corrosion
Power Module
Conduit Entries
Sealed unit encapsulated in an
engineered composite resin to
eliminate all water entry.
1/2" NPT openings are available in
the cast aluminum integral junction
box. Suitable for through-branch
wiring. This box has 17in3 of volume.
Lamp Types
MR-16, PAR and R lamps with
medium bases to 75W max. Lamp
included.
Ordering Information
Product
9000
9050
Material
A Aluminum
B Bronze
Lamp type
Distribution 3
Voltage
1
Low voltage
M20
M35
M50
M75
P3636ILV
P3650ILV
P3675ILV
Incandescent2
P1660I
P1675I
P2050I
P3075I
12
120
VNSP Very
narrow
spot
NSP Narrow
spot
SP Spot
NFL Narrow
flood
FL Flood
WFL Wide
flood
Lens
Conduit entry
Accessories
Lamp
CLC Convex lens
clear
CLF Convex lens
frosted
FLC Flat lens
clear
FLC5 Flat lens
clear, 5° axial
spread
FLC10 Flat lens
clear, 10° tilt
FLF Flat lens
frosted
12B 1/2” NPT
bottom
34B 3/4” NPT
bottom
Internal
IHL Internal honeycomb
louver
MSR Modular support
ring
External4
GS Glare shield
RG Rock guard5
Trims and rings4
BTR Bronze trim round6
BTS Bronze trim square7
STR Stainless trim round6
PRR Protective ring
round6
PRS Protective ring
square7
LP Lamp
installed
VWFL Very
wide
flood
9050
8
(203)
9000
Incandescent low voltage (no
transformer)
HYDREL
U.L., CSA., IP67.
Example: 9000 B M50 120 FL FLC 12B RG
Low voltage (with transformer)
614
Listings
9-1/2
(241)
8
(203)
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
NOTES:
1 If 12V is selected, transformer will not be
provided.
2 Only available in 120V.
3 All distributions are not available with all
lamp types.
4 Accessories are mutually exclusive.
Choose one.
5 RG not valid with CLC or CLF lens.
6 Only available with 9000.
7 Only available with 9050.
13-1/2
(343)
www.hydrel.com
PSG9
Performance In-grade
M9400
The M9400 Series modular in-grade lights are multi-purpose units designed for flush mounting in a
variety of substrates or materials. The M9400 fixtues are used to uplight architectural and landscape
features.
Door Finish
Cast aluminum, cast bronze, cast
bronze with stainless perforated trim
insert or stainless steel. Round or
square with two stainless steel
captive fasteners that lock the lamp
module into the rough-in section.
Rough-In Section
Injection molded polymer with
integral junction box for branch
wiring (410 ccm - 25 in3), U.V.
stabilized, impact and corrosion
resistant for use in all types of
environments. Houses power module,
lamp modules and finishing
components. Adjustment ring
provides 360° aim rotation with keyed
section to receive lamp module. Ring
locks into position with stainless steel
fasteners. RIS has a cylinder/vault
configuration.
Lamp Module
Stainless steel, sealed and purged of
all moisture with silicone gaskets,
stainless steel clamp band and single
fastener. Electrical connection to
lamp module is done through
submersible connector with goldplated contacts. Lamp included.
Double Lens
Includes 360° Aim-Lock™ module
support ring, door assembly, tilt ring,
and module indexing segment
providing maintenance and relamping
without re-aiming. The lamp module
is suspended below the door lens in a
surface adjustable, 15° tilt
mechanism. The insulating air layer
reduces surface temperatures. The
lenses are clear tempered flat glass.
Power Module
Product
M9410 Round
single
lens
M9420 Round
double
lens
M9430 Square
single
lens
M9440 Square
double
lens
Material
A Aluminum
B Bronze
ASP Aluminum
with
stainless
perforation1
BSP Bronze with
stainless
perforation1
BBP Bronze with
brass
perforation1
SS Stainless
steel
PSG9
Two 1/2”, 3/4", 1" NPT bottom
openings. Box suitable for throughbranch wiring. Splicing volume is 25 in3
(410 ccm).
U.L., C.U.L., IP68.
Example: M9420 BSP 70CMT6 MVOLT SP FLC 34B ISS RG GEB LP
Lamp type
Low
voltage2
Distribution 5
Lens
VNSP Very narrow
spot
NSP Narrow spot6
SP Spot
MFL Medium flood6
NFL Narrow flood
FL Flood
WFL Wide flood
VWFL Very wide flood
WWD Wall wash
distribution7
ASY Asymmetrical8
CLC Convex lens clear
CLF Convex lens
frosted
FLC Flat lens clear
FLC5 Flat lens clear, 5°
axial spread
FLC10 Flat lens clear,
10° tilt
FLC20 Flat lens clear,
20° tilt
FLCAS Flat lens clear,
anti-slip
FLF Flat lens frosted
Voltage
12
120
M35
M50
208
240
M75
P3650ILV
277
P3675ILV
347
Incandescent3
MVOLT4
P1675I
P2050I
P3075I
75Q
100Q
Fluorescent
18TRT
26TRT
32TRT
Ceramic metal halide
35CMT4
35CMT6
70CMT4
70CMT6
P2035CM
P3035CM
P3070CM
11 Accessories are mutually exclusive, not
available with SS door. Only RG and GS can
be ordered together.
12 RG is not valid with CLC or CLF lenses.
13 SF available with 120V, 277V or 347V and
HID only.
14 DF available with 208V, 220V or 240V and
HID only.
15 Only available with HID lamps and MVOLT
voltage.
16 Standard on CMT4 lamps.
17 For use with 0-10V analog dimmer (by others). Additional electrical conductors are
required. Consult Hydrel for details.
18 Standard finish is unpainted unless
specified; only available on aluminum
doors.
Accessories
Conduit entry
M9410
12B
12S
34B
34S
1B
1/2” NPT bottom
1/2” NPT side
3/4” NPT bottom
3/4” NPT side
1” NPT bottom
9
(229)
M9430
15-9/10
(405)
15-9/10
(405)
Incandescent, low voltage (no transformer)
12-1/5
(310)
14-2/5
(365)
19-2/5
(494)
19-2/5
(494)
HID, fluorescent, low voltage (with transformer)
www.hydrel.com
Finish18
Internal
LP Lamp
BL
inIHL Internal honeycomb
BZ
stalled
louver
DDB
9
ISS Internal source shield
DNA
LSF Linear spread filter
CFAMB Color filter amber
GN
CFBLU Color filter blue
GR
CFGRN Color filter green
SND
CFRED Color filter red
STG
WWL Wall wash louver10
TVG
11
External
GS Glare shield
WH
LC Polycarbonate
CF
protective cover
LS Light shield
Options
RG Rock guard12
Trims11
Fusing
BTR Bronze trim round
SF Single fuse13
BTS Bronze trim square
DF Double fuse14
STR Stainless trim round Ballast15
STS Stainless trim square
GEB Electronic ballast16
MLEBAD Electronic dimming
9
(229)
ballast17
M9440
M9420
Lamp
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
NOTES:
1 Not available with M9430 and M9440.
2 If 12V is selected, transformer will not be
provided.
3 Only available in 120V.
4 MVOLT is only available with fluorescent
and metal halide lamps with electronic
ballasts.
5 All distribution not available with all lamp
types.
6 Only available with T4, T6 and fluorescent lamps.
7 Only available with T4 and fluorescent
lamps.
8 Only available with fluorescent lamps.
9 Not available with PAR, MR or fluorescent
lamps.
10 Only valid with WWD distribution.
Electrical Entries/Junction Box
Listings
Ballast is encapsulated in a customheat dissipating epoxy resin to
Ordering Information
eliminate all moisture intrusion to
the ballast. Provided with
submersible rated cord/connector
for connection to integral junction
box and lamp module. HID ballasts
are magnetic.
INGR
ADE LIGHTING
IN-GR
GRADE
Intended Use
615
INGR
ADE LIGHTING
IN-GR
GRADE
Performance In-grade
Intended Use
M9700
Hydrel’s M9700 Series modular in-grade lights are multi-purpose units designed for uplighting of
architectural and landscape features. These units can be flush mounted into a variety of substrates
or landscape materials.
Door Material
finishing section.
Cast aluminum, cast bronze, cast
aluminum or bronze with stainless
perforated trim insert or stainless
steel. Available in round or square
door trim.
Lamp Module
Stainless steel housing, factorysealed and purged of all moisture for
longer component life. Lens is sealed
with silicone gasket and stainless
steel clamp band assembly with
single fastener. Electrical connection
to lamp module is done through a
submersible quick-pull plug
connector with gold-plated contacts.
Standard unit is thermally protected.
Lamp included.
Rough-In Section
Injection molded polymer with
integral junction box for throughbranch wiring. The housing is U.V.
stabilized, impact and corrosion
resistant for use in all types of
environments. The rough-in section
has a cylinder/vault configuration
and houses the lamp and power
module components and top door
Finishing Section
Single lens design includes door
Ordering Information
Product
M9710 Round
single
lens
M9720 Round
double
lens
M9730 Square
single
lens
M9740 Square
double
lens
Material
A
B
SS
ASP
BBP
BSP
AAS
ASS
BBS
HYDREL
BSS
616
Aluminum
Bronze
Stainless steel
Aluminum w/
stainless
perforation1
Bronze w/brass
perforation1
Bronze w/
stainless1
perforation
Aluminum door
w/aluminum
trim, solid1,2
Aluminum door
w/stainless steel
trim, solid1,2
Bronze door w/
bronze trim,
solid1,2
Bronze door w/
stainless steel
trim, solid1,2
assembly with 360° Aim-LockTM
lamp module support ring. Module
indexing provides easy maintenance
and relamping without re-aiming.
Active optical lenses are also
available. Door trim locks into position
with two stainless steel captive,
tamper-resistant fasteners.
Power Module
Ballast is encapsulated in a custom
designed heat-dissipating epoxy resin
that also eliminates all moisture
intrusion to the ballast. Module is
provided with submersible rated cord
leads for connection to integral
junction box and lamp module.
Standard ballast is high power
factor; fluorescent electronic or HID
magnetic.
Conduit Entries
Two (2) bottom or side entries
available. Box suitable for throughbranch wiring. Splicing volume is 25
in3 (410 ccm).
Finish
Finish is natural aluminum or bronze.
Stainless steel door is brushed finish.
Aluminum doors may be painted. See
ordering guide.
Listings
U.L., C.U.L., IP68.
Example: M9710 B 150CMT6 120 NSP FLC 34B ISS GS LP
Lamp type
Voltage
Distribution
Incandescent
P38100I
P38150I
P38250I
100Q
150Q
250Q
Fluorescent
18TRT
26TRT
32TRT
42TRT
Metal halide
100M
150M
175M
P3870M
P38100M
P38150M
Ceramic metal
halide
70CMT6
150CMT6
70CM
100CM
150CM
P3870CM
P38100CM
High pressure
sodium
70S
70S
100S
150S
120
208
240
277
347
MVOLT 3
NSP Narrow
spot
SP Spot
NFL Narrow
flood
MFL Medium
flood
FL Flood
WFL Wide flood
WWD Wall wash
distribution4
Conduit entry
12B
12S
34B
34S
Accessories
1/2” NPT bottom
1/2” NPT side
3/4” NPT bottom
3/4” NPT side
Lens
CLC Convex lens clear
CLF Convex lens
frosted
FLC Flat lens clear
FLC5 Flat lens clear, 5°
axial spread5
FLC10 Flat lens clear, 10°
tilt
FLC20 Flat lens clear, 20°
tilt
FLCAS Flat lens clear,
anti-slip
FLF Flat lens frosted
FLF5 Flat lens frosted, 5°
axial spread4
12
(305)
12
(305)
20
(508)
HID, Fluorescent
16
(407)
Options
Lamp
LP Lamp
Internal
Fusing
installed
IHL Internal
SF Single
honeycomb louver
fuse13
ISS Internal source
DF Double
shield6
fuse14
LSF Linear spread
Finish17
Ballast15
CFAMB Color filter amber
GEB ElecBL Black
CFBLU Color filter blue
tronic
BZ Bronze
CFGRN Color filter green
ballast
DDB Dark
CFRED Color filter red
MLEBAD Elec7
bronze
WWL Wall wash louver
tronic
External8
DNA Natural
dimGS Glare shield
aluminum
ming
LC Polycarbonate
GN
Green
16
ballast
protective cover9
GR Gray
LS Light shield
SND Sand
RG Rock guard10
STG Steel gray
Trims8
TVG
Terra verde
BTR Bronze trim
green
round11
WH White
BTS Bronze trim
CF Custom
square12
STR Stainless trim
round11
6 ISS not available with PAR or fluorescent
STS Stainless trim
lamps, or WWD distribution.
square12
7 Not available with PAR lamps.
Rings and masks
8 Not available with SS material. Accessories
PRR Protective ring
are mutally exclusive. Choose one.
round11
9 LC not available for M9710, M9730.
PRS Protective ring
10 RG not available with CLC or CLF convex lens.
square12
11 Available with M9710, M9720 only.
GM Grout mask
NOTES:
1 Not available with M9730, M9740 models.
Available with unpainted finish only.
2 Available to 100W max only.
3 Standard on fluorescent and metal halide
lamps with electronic ballast option.
4 FLF5 lens recommended for 70W HID and
lower. FLC5 lens recommended for 100W HID
and higher.
5 Default lens for WWD distribution quartz,
fluorescent, and 100W HID and higher.
12
13
14
15
Available with M9730, M9740 only.
SF available with 120V, 277V or 347V HID only.
DF vailable with 208V, 220V or 240V HID only.
Available with MVOLT (120V-277V) voltage
only for metal halide lamps to 150W maximum.
16 For use with O-10V analog dimmer (by others). Additional electrical conductors are
required. Consult Hydrel for details.
17 Standard finish is unpainted unless specified, only available on aluminum doors.
Incandescent
www.hydrel.com
PSG9
Performance In-grade Accessories
BTR Bronze trim ring
INGR
ADE LIGHTING
IN-GR
GRADE
Installation Accessories
Safety Accessories
STR Stainless trim ring
RG Rock guard, bronze or aluminum
LC Polycarbonate protective cover
Light Control Accessories
IHL Internal honycomb louver
WWL Wall wash louver
ISS Internal source shield
FLC5 5° Axial spread lens
FLC10 10° tilt lens
FLC20 20° tilt lens
BSP Perforated door – stainless
perforations on bronze
ASP Perforated door –stainless
perforations on aluminum
A Aluminum door
B Bronze door
GS Glare shield, bronze or aluminum
Door Material Options
PSG9
www.hydrel.com
SS Stainless steel door
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
BBP Perforated door – brass
perforations on bronze
617
INGR
ADE LIGHTING
IN-GR
GRADE
Performance In-grade
Intended Use
6410
This multi-purpose fixture is designed for surface or flush mounting in planting areas and is ideal for
lighting walls, building façades, trees and similar applications where a controlled light source is
desirable.
Fixture
Voltage
Cast aluminum or cast bronze.
12V standard.
#14-2 cable. Side entry. Cord length
must be specified.
Lamp
Electrical
Lens
MR-16 with bi-pin socket, 50W max.
Supplied with a minimum of 10 ft of
Flat, clear tempered glass.
Ordering Information
Product
6410
Material
A Aluminum
B Bronze
Listings
U.L., CSA, suitable for wet locations.
Example: 6410 B M50 12 VNSP FLC CSL50 IHL LPI
Lamp type
M20
M35
M50
Voltage
1
12
Distribution2
VNSP
NSP
SP
NFL
FL
WFL
Very narrow
spot
Narrow spot
Spot
Narrow flood
Flood
Wide flood
Lens
Cord set length
Accessories
Lamp
FLC Flat lens
clear
CSL__ 10’-50’ in 5’
increments
Internal
IHL Internal honeycomb
louver
External
BTR Bronze trim ring
ATR Aluminum trim ring
LPI Lamp
included
FLCS Flat lens
clear, 5°
axial spread
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
NOTES:
1 Transformer sold separately.
2 Only valid if LPI is chosen. Not all distributions available with all lamp types.
HYDREL
5-1/4"
618
4-3/4"
5-1/2"
www.hydrel.com
PSG9
Performance In-grade
6700
The 6700 Series sealed outdoor lighting fixture offers high performance and durability in an ingrade fixture. Many lamping options and distributions are available including HID lamps to 175W.
Integral ballast and junction box add further to the Series’ reliability.
Material
Ballast
Listings
Integrally mounted ballast, rated for
low starting temperatures.
U.L., C.U.L., IP67.
Heavy wall cast bronze body and door.
performance and uniformity. Lamps
or reflectors are adjustable.
Reflector
Lens
(Non-reflectorized lamps): High
purity anodized specular or semispecular materials in various
distributions provide maximum
Tempered clear flat borosilicate glass.
Finish
Conduit Entries
Raw bronze.
Two 1/2" or 3/4" NPT entries available
bottom or side.
Ordering Information
Example: 6700 B 70CMT6 MVOLT NSP FLC 34B IHL GEB LP
Material
Lamp type
Voltage
Lens
6700
B Bronze
Incandescent1
P38100I
P38150I
100Q
250Q
Fluorescent2
18TRT
26TRT
32TRT
42TRT
Metal halide
100M
150M
175M
P3870M
P38100M
Ceramic metal halide
70CMT6
150CMT6
70CM
100CM
150CM
P3870CM
P38100CM
High pressure sodium
70S
70S
100S
150S
12
120
208
240
277
347
MVOLT3
CLC Convex lens
clear
CLF Convex lens
frosted
FLC Flat lens clear
FLC5 Flat lens clear,
5° axial spread
FLC10 Flat lens clear,
10° tilt
FLC20 Flat lens clear,
20° tilt
FLCAS Flat lens clear,
anti-slip
FLF Flat lens
frosted
Distribution
NSP
SP
NFL
MFL
FL
WFL
WWD
Narrow spot4
Spot5
Narrow flood
Medium flood
Flood5
Wide flood5
Wall wash
distribution
NOTES:
1 Incandescent models available with 120V only.
2 Fluorescent models available with 347V or MVOLT (120-277V) only.
3 Standard on fluorescent lamps and metal halide lamps with GEB ballasts.
4 NSP only available with T4 or T6 lamps.
5 Not available with T6 lamps.
6 ISS not available with WWD distribution or P38 lamp type.
7 Only available with wall wash distribution (WWD).
8 Accessories are mutually exclusive. Choose one.
9 RG not available with CLC or CLF lenses.
10 SF only is available with 120V, 277V or 347V on HID only.
11 DF only is available with 208V or 240V on HID only.
12 Electronic ballasts only are available with metal halide lamps and MVOLT voltage.
Conduit entry
12B
12S
34B
34S
1/2” NPT
bottom
1/2” NPT
side
3/4” NPT
bottom
3/4” NPT
side
13-3/4
(348)
10-1/2
(267)
18-1/8
(460)
1/4
(6.4)
9-1/4
(235)
www.hydrel.com
Accessories
Options
Lamp
Internal
IHL Internal
honeycomb
louver
ISS Internal source
shield6
LSF Linear spread
filter
CFAMB Color filter
amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
WWL Wall wash
louver7
External8
GS Glare shield
LS Light shield
RG Rock guard9
Trims
BTR Bronze trim
round
STR Stainless trim
round
Masks
GM Grout mask
Fusing
SF Single fuse10
DF Double fuse11
Ballast12
GEB Electronic
ballast
LP Lamp
installed
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
Product
PSG9
INGR
ADE LIGHTING
IN-GR
GRADE
Intended Use
619
INGR
ADE LIGHTING
IN-GR
GRADE
Well Lighting
Intended Use
9310
The 9310 Series is designed for flush mounting in planters and open lawn areas.
Material
Lamp Housing
Lamp Type
Listings
Grill: cast aluminum painted or cast
bronze natural finish. Well: thick wall
A.B.S. pipe.
Cast aluminum or bronze body with
fins for heat dissipation.
Incandescent: 50W max. PAR20.
U.L., CSA.
Conduit Entries
Inter-connecting conduit shall be 1/2”
galvanized pipe, with brass cord seal.
Ordering Information
Product
9310
Material
A Aluminum
B Bronze
Example: 9310 B M50 120 NSP 34B LC LP
Lamp type
Low voltage
M20
M35
M50
Incandescent
P2035I
P2050I
Ceramic metal halide1
20CMT4
35CMT4
P2035CM
Distribution4
Voltage
2
12
120
208
220
240
277
347
MVOLT3
NSP Narrow
spot
SP Spot
NFL Narrow
flood
FL Flood
MFL Medium
flood
WFL Wide
flood
Conduit entry
Accessories
12B 1/2” NPT
bottom
34B 3/4” NPT
bottom
7 GRILL
(178)
GEB Electronic
ballast5
LP Lamp
installed
Finish6
BL Black
BZ Bronze
DDB Dark
bronze
DNA Natural
aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra
verde
green
WH White
CF Custom
7 GRILL
(178)
7 (178)
4-1/2
(114)
7 (178)
4-1/2
(114)
10
(254)
HYDREL
Lamp
9310 HID, low voltage
(with transformer)
9310 Incandescent, low
voltage (no transformer)
620
LC Lexan cover
Options
20
(508)
www.hydrel.com
NOTES:
1 Requires GEB ballast option.
2 Transformer sold separately.
3 MVOLT is standard on all metal halide
lamps.
4 Not all distributions available on all lamp
types. T4 lamps only available with SP
and MFL distribution.
5 Electronic ballasts are only available with
metal halide lamps and MVOLT voltage.
6 Finish available on aluminum.
PSG9
Well Lighting
9330
9335
The 9330 Series is designed for flush mounting in planter, tree grates or open lawn areas. The
9335 Series is designed for mounting in standard Neenah tree grates.
Grill
Well
Lens
Conduit Entries/J-Box
Cast aluminum or bronze – locks to
well with two set screws. Full
eggcrate louver or directional
eggcrate louver square grills and
directional louver or clear
polycarbonate cover round grills are
available. Eggcrate directional louvers
provide 30° cut-off.
Thick wall polypropylene pipe.
Tempered glass lens. Convex lens clear
(CLC) is standard. Convex lens frosted
(CLF) also available.
Two 3/4" NPT openings in the bottom
of the J - box. 25 in3 of volume
suitable for through-branch wiring.
Fixture/J-box connecting conduit is
1/2" galvanized pipe with brass cord
seal.
Lamp Module Housing
Stainless steel, sealed and purged of
all moisture to 100°F (38°C) and
mounted integral with grill. Angular
adjustment up to 15°. Electrical access
to lamp module is done through
submersible rated connector.
Thermally protected. Lamp included.
Power Module
Sealed unit encapsulated in an
engineered composite resin to
eliminate all water entry.
9330
9335
Example: 9330 B P3070CM MVOLT SP CLC 34B DL ASR GEB LP
Depth
ED
Lamp type
1
Material
A Aluminum
B Bronze
2
Voltage
Low voltage
M20
M75
P3636ILV
P3650ILV
AR11175ILV
Incandescent
P2050I
P3050I
P3075I
Ceramic metal halide
100CM
P2035CM
P3035CM
P3070CM
Metal halide
50M
70M
100M
High pressure sodium
50S
70S
100S
3
12
120
2084
240
277
347
MVOLT5
Clear Polycarbonate
Cover (CPC)
Distribution6
34B
3/4”
NPT
bottom
Lens
Grill
CLC Convex
lens clear
CLF Convex
lens
frosted
DEL Directional
eggcrate
louver
(square)2
FEL Full eggcrate
louver
(square)2
DL Directional
louver (round)
CPC Clear
polycarbonate2
Lamp
LP Lamp
installed
Finish10
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
9-1/2
(241)
Directional Eggcrate
Louver (DEL)
10-3/8
(270)
9-1/2
(241)
9335 HID
18-1/2
(470)
Options
Fusing
SF Single fuse7
DF Double fuse8
Ballast
GEB Electronic
ballast9
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
Full Eggcrate
Louver (FEL)
9-1/2
(241)
9330 HID
Accessories
ASR Aim set
ring2
IHL Internal
honeycomb
louver
9330 Incandescent
18-1/2
(457)
10-3/8
(270)
20
(508)
8-1/4
(210)
8-3/4
(222)
www.hydrel.com
9335 Incandescent
1/2
(13)
10-3/8
(270)
20
(508)
10-1/2
(267)
10-1/2
(267)
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
PSG9
Directional Louver (DL)
Conduit entry
FL Flood
SP Spot
NFL Narrow
flood
WFL Wide flood
NSP Narrow spot
VWFL Very wide
flood
9-1/2
(241)
NOTES:
1 ED option add 10” to well height. Not available with 9335.
2 Not available with 9335.
3 Transformer sold separately.
4 208V not available with low-voltage fixtures.
5 Standard on fluorescent and metal halide
lamps with GEB ballast.
6 Not all distributions available with all
lamp types.
7 SF available with 120V or 277V only.
8 DF available with 208V, 240V or 347V only.
9 Electronic ballasts are only available with
metal halide lamps and MVOLT voltage.
10 Finish available on aluminum fixtures
only.
Listings
U.L., CSA, IP67.
Ordering Information
Product
INGR
ADE LIGHTING
IN-GR
GRADE
Intended Use
621
INGR
ADE LIGHTING
IN-GR
GRADE
Well Lighting
Intended Use
9350
Uplighting of trees, shrubs, terraces or walls from a flat lawn area. The units are completely
weatherproof, designed for installation in damp areas.
Grill
Well
Lens
Conduit Entries/J-Box
Cast aluminum or bronze. Locks to well
with two set screws. Full eggcrate
louver or directional eggcrate louver
square grills and directional louver or
clear polycarbonate cover round grills
are available. Eggcrate directional
louvers provide 30° cut-off. Clear
polycarbonate cover grill is 100W max.
Thick wall polypropylene pipe for
higher wattages.
Tempered glass lens. Convex lens
clear (CLC) is standard. Convex lens
frosted (CLF) also available.
Two 3/4" NPT. 25 in3 of volume
suitable for through-branch wiring.
Fixture/J-box connecting conduit is
1/2" galvanized pipe with brass cord
seal. IJB – internal junction boxes
also are available.
Lamp Module Housing
Stainless steel, sealed and purged of
all moisture to 100°F (38°C) and
mounted integral with grill. Angular
adjustment up to 15°. Electrical access
to lamp module is done through
submersible rated connector.
Thermally protected. Lamp included.
Ordering Information
Depth
Lamp type
9350
ED1
Quartz2
100Q
150Q
250Q
Incandescent2
P38100I
P38150I
Ceramic metal halide
70CM
100CM
150CM
P3870CM
Metal halide
70M
100M
P38100M
150M
P38150M
175M
High pressure sodium
70S
100S
150S
A Aluminum
B Bronze
Sealed unit encapsulated in an
engineered composite resin to
eliminate all water entry. High power
factor ballast.
Conduit entry
Distribution
ASR Aim set
ring
IHL Internal
honeycomb
louver
Voltage
Lens
Grill
120
208
240
277
347
MVOLT3
CLC Convex lens
clear4
CLF Convex lens
frosted
DEL Directional
eggcrate louver
(square)
FEL Full eggcrate
louver (square)
DL Directional louver
(round)
CPC Clear
polycarbonate
cover (round)5
9350 Incandescent
20-1/2
(521)
HYDREL
U.L., C.E., CSA, IP67.
9350 HID
11-1/2
(292)
11-1/2
(292)
10
(254)
10-1/2
(267)
www.hydrel.com
IJB
Lamp
LP Lamp
installed
Finish10
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
11-1/2
(292)
Directional Eggcrate
Louver (DEL)
11-1/2
(292)
Internal
junction box6
Fusing
SF Single fuse7
DF Double fuse8
Ballast
GEB Electronic
ballast3,9
Full Eggcrate
Louver (FEL)
Directional Louver (DL)
20
(508)
Options
Accessories
34B 3/4” NPT
bottom
FL Flood
SP Spot
Clear Polycarbonate
Cover (CPC)
622
Listings
Example: 9350 A 100M 120 FL CLC 34B DEL ASR TVG
Product
Material
Power Module
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
NOTES:
1 ED option add 10” to standard well height.
2 Only available in 120V.
3 MVOLT is standard if GEB is selected on
metal halide lamps.
4 CLC default if lens option not chosen.
5 100W max.
6 IJB is not available with ED option.
7 SF available with 120V, 277V or 347V only.
8 DF available with 208V or 240V only.
9 Electronic ballasts only are available with
metal halide lamps.
10 Finish available on aluminum fixture
only.
PSG9
Accent Lighting
2100
The 2100 Series is a compact, high-performance lighting fixture available with incandescent or HID
lamp types. Several ideal distributions are offered for a wide variety of applications. The 2100
Series yoke-mounted unit also includes multiple mounting accessories.
Head
Material
Socket
Mounting
Listings
Rugged heavy wall cast aluminum
body and hinged door. All fasteners
are stainless steel.
Mini-can, screw shell or G12 base, bi-pin.
Yoke mount with a minimum of 10
ft 18/3 STW cord. Cord length must
be specified.
U.L., C.U.L., suitable for wet
locations.
Lens
High strength curved, tempered glass.
Lamp
Incandescent: T-4 mini-can to 250W
max. Metal halide: T-6, G12 to
150W max.
Finish
Textured TGIC powder coat polyester
finish (see ordering guide for
available colors.
Ordering Information
Example: 2100 70CMT6 120 RN YM RACB GS SF CSL10 LPI BL
Product
Lamp type
Voltage
Distribution
Mounting
2100
Incandescent1
100Q
150Q
250Q
Ceramic metal
halide2
35CMT6
70CMT6
150CMT6
120
208
240
277
347
120/277
MVOLT 3
TB
RN Rectangular
narrow
RM Rectangular
medium
RW Rectangular
wide
YM Yoke
mount
Mounting
accessories
See page 631.
Accessories
External4
GS Half glare
shield
FGS Full glare
shield
VSR Visor
Options
Fusing
SF Single fuse5
DF Double
fuse6
7
Ballast
GEB Electronic
ballast
MLEBAD Electronic
dimming
ballast8
Cord set length
Finish
Lamp
CSL__ 10’-50’ of LPI Lamp
cord
included
(available
in 5’
increments)
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
3-15/16
(100)
7-3/4
(197)
5-3/4
(146)
8-3/4
(222)
www.hydrel.com
5-1/2
(140)
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
NOTES:
1 Available in 120V only.
2 Requires HID ballast enclosure.
3 MVOLT is standard on all metal halide
lamps with GEB ballast option.
4 Accessories are mutually exclusive.
Choose one.
5 SF is available with 120V, 277V or 347V on
HID only.
6 DF is available with 208V or 240V on HID
only.
7 Only available with 35CMT6 and 70CMT6
with MVOLT voltage.
8 For use with 0-10V analog dimmer (by others). Additional electrical conductors are
required.
PSG9
LANDSC
APE LIGHTING
LANDSCAPE
Intended Use
623
LANDSC
APE LIGHTING
LANDSCAPE
Accent Lighting
4511
Intended Use
Low-profile accent light for shrubs, planters or wall mountings.
Head
Material
Lamp
Lens
Listings
Housing is machined aluminum alloy.
Knuckle is cast bronze.
Low voltage: MR-11, 35W max.
Tempered flat glass.
U.L., CSA, IP66, suitable for wet
locations.
Mounting
Requires low voltage supply.
1/2" NPT adjustable knuckle.
Ordering Information
Product
4511
Lamp type
Example: 4511 M35 12 SP WMC LPI DNA
Voltage
1
Low voltage
M35
12
1202
2772
5-3/8
(137)
No reflector
Spot
Narrow spot
Flood
Narrow flood
Wide flood
1-15/16
(49)
Lamp
See page 631.
NOTES:
1 Transformer sold separately.
2 Only valid when tranfomer box is ordered.
3 Distribution only required with LPI option. All others choose NR.
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
Material
Lamp
Lens
Listings
Housing is die-cast, copper-free
aluminum alloy A360. Knuckle is cast
bronze.
Low voltage: MR-16 quartz halogen,
50W max.
Tempered flat glass.
U.L., CSA, IP66, suitable for wet
locations.
Product
4516
Mounting
Requires low voltage supply.
1/2" NPT adjustable knuckle.
Lamp type
Example: 4516 M50 12 SP WMSA LPI DNA
Voltage
1
Low voltage
M50
12
1202
2772
Distribution3
NR
SP
NSP
FL
NFL
WFL
No reflector
Spot
Narrow spot
Flood
Narrow flood
Wide flood
Mounting
accessories
Lamp
LPI Lamp included
See page 631.
3-3/16
(81)
2-3/4
(70)
HYDREL
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Low-profile accent light for shrubs, planters or wall mountings.
Ordering Information
624
Finish
LPI Lamp included
Intended Use
4516
Head
NR
SP
NSP
FL
NFL
WFL
3-7/16
(87)
2-9/16
(65)
Mounting
accessories
Distribution3
5-1/8
(130)
www.hydrel.com
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
NOTES:
1 Transformer sold separately.
2 Only valid if tranfomer box is ordered.
3 Distribution only required with LPI option. All others choose NR.
PSG9
Accent Lighting
4519
Spotlights architectural or landscape features from the ground, wall mountings or trees.
Head
Material
Metal halide: PAR 38 to 150W max.
blue, green or red lenses available.
Listings
Cast aluminum with cast bronze
knuckle.
Lens
Mounting
U.L., CSA, suitable for wet locations.
Incandescent: No lens. Lamp face
forms lens on incandescent. HID:
convex, clear tempered glass. Amber,
1/2" NPT adjustable knuckle.
Lamp
Incandescent: PAR38 to 250W max.
4519
Lamp type
6-3/8
(166)
Fasteners
Stainless steel.
Ordering Information
Product
9-1/4
(235)
LANDSC
APE LIGHTING
LANDSCAPE
Intended Use
2-1/2
(76)
Example: 4519 P38250I 120 SP JBA LPI DDB
Distribution4
Voltage
Mounting
accessories
Lens5
1
Options
Finish
Incandescent
120
NR No reflector CLC Convex lens clear
Fusing
208
P38100I
SP Spot
CLA Convex lens amber See page 631.
SF Single fuse6
240
P38120I
FL Flood
CLB Convex lens blue
DF Double fuse7
P38250I
277
WFL Wide flood CLG Convex lens green
Ballast
Ceramic metal halide2 347
CLR Convex lens red
GEB Electronic
ballast
120/277
P2035CM
P3870CM
MVOLT3 NOTES:
1 Available with 120V only.
P38100CM
TB
Lamp
Accessories
2 Separate ballast enclosure required for HID models.
Metal halide2
LPI
Lamp
GS
Glare
3 MVOLT is standard on metal halide lamps with GEB ballast
P3870M
included
shield
option.
P38100M
4 Not all distrutions available with all lamp types, use NR
P38150M
when not using LPI option.
5 CLC will be used if no lens is chosen on HID.
6 SF is available with 120V or 277V on HID only.
7 DF is available with 208V, 220V or 240V on HID only.
BL Black
BZ Bronze
DDB Dark
bronze
DNA Natural
aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra
verde
green
WH White
CF Custom
Intended Use
4524
Accents trees, shrubs, signs and walls from the ground, wall mountings or trees.
Material
max. HID: metal halide PAR-20, 35W max.
Mounting
Listings
Heavy wall cast aluminum or bronze.
Lens
1/2" NPT adjustable knuckle.
U.L., CSA, suitable for wet locations.
Lamp
Clear convex tempered glass. Amber,
blue, green and red lenses also are
available.
Fasteners
Low voltage: MR16, 75W max.
Incandescent: PAR-16 or PAR-20, 60W
Ordering Information
Product
Low
voltage1
3-7/8
(98)
Example: 4524 A P2035CM 277 SP CLC SPCA LP BL
Distribution4
Voltage
122
NR
NSP
SP
NFL
No reflector
Narrow spot
Spot
Narrow
flood
FL Flood
WFL Wide flood
Lens5
CLC Convex lens
clear
CLA Convex lens
amber
CLB Convex lens
blue
CLG Convex lens
green
CLR Convex lens
red
Mounting
accessories
See page 631.
M35
120
M50
2083
Accessories
M75
2403
Materials
Internal
Incandescent
277
A Aluminum
IHL Internal
P1640I
347
B Bronze
honeycomb
P1655I
120/2773
louver
P1660I
MVOLT3
External
3
P2050I
TB
GS Glare shield
P2060I
NOTES:
1
Ceramic metal halide
1 Separate ballast enclosure required for HID models, transformers for low voltage.
P2035CM
2
3
4
5
6
7
8
PSG9
6
(152)
Stainless steel.
Options
Finish
Fusing
SF Single
fuse6
DF Double
fuse7
Ballast
GEB8 Electronic
ballast
BL Black
BZ Bronze
DDB Dark
bronze
DNA Natural
aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde
green
WH White
CF Custom
Transformer sold separately.
Only available with HID lamps.
Not all distributions available with all lamp types, use NR when not using LPI option.
CLC will be used if no lens is chosen on HID.
SF is available with 120V, 277V or 347V on HID only.
DF is available with 208V or 240V on HID only.
Only valid with metal halide lamps.
www.hydrel.com
Lamp
LP Lamp
installed
5-5/8
(140)
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
4524
Lamp type
Head
625
LANDSC
APE LIGHTING
LANDSCAPE
Accent Lighting
Intended Use
4529
Uplighting of trees, signs, walls and building façades.
Head
Material
Lamp
Mounting
Listings
Cast aluminum or cast bronze body
and glare shield. Knuckle is cast
bronze.
Incandescent: PAR38 medium-base.
1/2" NPT adjustable knuckle.
U.L., suitable for wet locations.
Lens
Fasteners
None.
Stainless steel.
Ordering Information
Example: 4529 B P38150I 120 SP JBB LP
Product
Material
Lamp type
Voltage
4529
A Aluminum
B Bronze
Incandescent
P38100I
P38150I
120
Distribution1
NR
SP
FL
WFL
Mounting accessories
No reflector
Spot
Flood
Wide flood
See page 631.
LP Lamp
installed
9
(229)
NOTES:
1 Not all distributions available with all
lamp types, use NR when not choosing
LPI option.
2 Finish required on aluminum products.
6
(153)
2-9/16 (65)
4610, 4620
3-3/4
(96)
Finish2
Lamp
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
Intended Use
Tree mounted or ground mounted uplighting, or building-mounted facade lighting.
Heads
HYDREL
NOTES:
1 Transformer, ballast sold sperately.
2 Transfomer included on 4620 unless 12V is specified.
3 Separate ballast enclosure required, available on
4620 only.
4 Requires GEB ballast.
5 Not all distributions available with all lamp types,
use NR when not choosing LPI option.
6 SF is available with 120V, 277V or 347V on HID only.
7 DF is available with 208V or 240V on HID only.
8 Only available with metal halide lamps and MVOLT
voltage.
9 Only valid with yoke mount.
626
Material
Lamp
Mounting
Fasteners
Fixture, knuckle, yoke – copper-free
aluminum A360. All aluminum
materials are chem filmed or
anodized prior to painting.
MR-16, 50W max.
Knuckle1/2" NPT adjustable. Yoke
mount with a minimum of 10 Ft. 18/3
STW Cord. Cord length must be
specified.
Stainless steel.
Lens
Crowned tempered glass.
Ordering Information
46101
46202
Voltage
Distribution5
Mounting
Accessories
NR No
reflector
NSP Narrow
spot
SP Spot
NFL Narrow
flood
FL Flood
WFL Wide
flood
KM Knuckle
mount
YM Yoke
mount
Internal
IHL Internal
honeycomb
louver
CFAMB Color filter
amber
CFBLU Color filter
blue
CFGRN Color filter
green
CFRED Color filter
red
External
GS Glare shield
FGS Full glare
shield
Lamp type
4610 KM
5-1/8
(131)
4-1/4
(108)
4610 YM
3
(76)
5-1/8
(131)
4-1/4
(108)
U.L., C.U.L., IP66, suitable for
wet locations.
Example: 4610 M50 277 FL KM SSB IHL FGS LPI SND
Low voltage
121
M202
120
M352
208
M502
240
M751
277
Ceramic metal halide3 347
35CMT4 4
120/277
P2035CM
MVOLT
TB
Product
Listings
Mounting
accessories
See page 631.
4620 KM
7-1/16
(180)
4620 YM
3
(76)
3
(76)
4-1/4
(108)
7-1/16
(180)
Options
Lamp
Fusing
LPI Lamp
inclulded
SF Single
fuse6
DF Double
fuse7
Ballast
Cord set length9
GEB Electronic
CSL __ 10’-50’
ballast8
in 5’
increments
Finish
BL Black
BZ Bronze
DDB Dark
bronze
DNA Natural
aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde
green
WH White
CF Custom
3
(76)
5-1/4
(133)
www.hydrel.com
PSG9
Accent Lighting
4630
4640
Landscape and architectural applications.
Material
Lamp
Fixture, knuckle, yoke – die-cast,
copper-free aluminum alloy A360. All
materials are chem.-filmed or
anodized prior to painting.
Incandescent: 150W max. HID: metal
halide 150W max.
Mounting
minimum of 10 ft 18-3 STW cord.
Cord length must be specified.
Fasteners
Lens
Listings
Crowned tempered glass.
U.L., C.U.L., C.E., IP66, suitable for
wet locations.
Stainless steel.
Knuckle: 1/2:” NPT adjustable. Yoke:
Ordering Information
Product
4630
Lamp type
Voltage
1
Incandescent
P3075I
Ceramic
metal halide2
P3035CM
P3070CM
20CMT4
35CMT4
70CMT4
120
208
240
277
347
480
120/277
TB
MVOLT3
Example: 4630 P3070CM 120 SP KM SSB IHL LPI BL
Distribution4
NR No
reflector
SP Spot
FL Flood
Mounting
accessories
Mounting
KM Knuckle
mount
YM Yoke
mount
See page 631.
4630 KM
Accessories
Internal
IHL
CFAMB
CFBLU
CFGRN
CFRED
External
GS
FGS
Internal honeycomb louver
Color filter amber
Color filter blue
Color filter green
Color filter red
Glare shield
Full glare shield
5-1/4
(133)
Lamp
Finish
LPI Lamp
included
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
5-1/4
(133)
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
Example: 4640 P38150I 120 SP KM 4TRAS IHL GS LPI TVG
Distribution4
Mounting
NR No
reflector
SP Spot
MFL Medium
flood
FL Flood
KM Knuckle
mount
YM Yoke
mount
Mounting
accessories
See page 631.
Accessories
Internal
IHL Internal
honeycomb louver
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
External
GS Glare shield
FGS Full glare shield
Options
Cord set length8
Fusing
SF Single
fuse5
DF Double
fuse6
Ballast
GEB Electronic
ballast7
CSL __ 10’-50”
in 5’
increments
NOTES:
1 Available in 120V only.
2 Separate ballast enclosure required.
3 MVOLT is standard on all metal
halide lamps with GEB ballast option.
4 Not all distribution available with
all lamp types.
5 SF is available with 120V, 277V or
347V on HID only.
6 DF is available with 208V or 240V on
HID only.
7 GEB default if MVOLT selected; only
valid with metal halide lamps.
4640 YM 8 Only valid with yoke mount.
4640 KM
9-3/8
(237)
6-1/2
(165)
9-3/8
(237)
6-1/4
(159)
www.hydrel.com
6-1/2
(165)
Finish
Lamp
LPI Lamp
included
BL
BZ
DDB
DNA
GN
GR
Black
Bronze
Dark
bronze
Natural
aluminum
Green
Gray
SND
STG
TVG
WH
CF
Sand
Steel gray
Terra verde
green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
Voltage
Quartz1
120
150Q
208
Incandescent1
240
P38100I
277
P38150I
347
Ceramic
480
metal halide2
120/277
70CMT6
TB
150CMT6
MVOLT3
Metal halide2
70M
100M
150M
175M
P3870M
P38100M
P38150M
High pressure sodium2
70S
100S
4-3/4
(121)
PSG9
CSL __ 10’-50”
in 5’
increments
5-1/4
(133)
Ordering Information
Lamp type
Fusing
SF Single
fuse5
DF Double
fuse6
Ballast
GEB Electronic
ballast7
8-1/16
(205)
4-1/4
(108)
4640
Cord set length8
Options
4630 YM
8-1/16
(205)
Product
Heads
LANDSC
APE LIGHTING
LANDSCAPE
Intended Use
627
LANDSC
APE LIGHTING
LANDSCAPE
Accent Lighting
Intended Use
4650
These large, versatile accent lights provide illumination for a variety of architectural and landscape
applications to sixty feet.
Head
Material
Socket
Mounting
Listings
Die-cast, copper-free aluminum alloy
A360. All aluminum materials are
chem-filmed or anodized prior to
painting.
Incandescent: mini-can (T-4) or
mogul end prong (PAR 56). HID:
medium-base or G12 base.
Knuckle:1/2" NPT, Yoke: with a
minimum of 10 ft 18/3STW cord.
Cord length must be specified.
U.L., C.U.L., C.E., IP66, suitable for wet
locations.
Voltage
Finish
Lamp
See ordering guide.
See ordering guide for color options.
Incandescent: T-4, 250W max., PAR56, 300W max. HID: E17, T-6 or PAR38, to 175W max.
Lens
Fasteners
Crowned tempered glass.
Stainless steel.
Ordering Information
Product
4650
Lamp type
1
Incandescent
250Q
P38100I
P56300I
Ceramic metal halide2
70CMT6
150CMT6
P38100CM
Metal halide2
70M
100M
150M
175M
P38100M
P38150M
Example: 4650 150M TB SP KM BSB FGS IHL LP DDB
Voltage
Mounting
Accessories
Cord set length8
Lamp
120
208
240
277
347
120/277
TB
MVOLT3
KM Knuckle
mount
YM Yoke
mount
Internal
IHL Internal
honeycomb
louver
CFAMB Color filter
amber
CFBLU Color filter blue
CFGRN Color filter
green
CFRED Color filter red
External
GS Glare shield
FGS Full glare shield
CSL __ 10’-50” of
cord
LPI Lamp
included
Mounting
accessories
Distribution4
TSP
NSP
SP
NFL
MFL
FL
WFL
NR
Tight spot
Narrow spot
Spot
Narrow flood
Medium flood
Flood
Wide flood
No reflector
See page 631.
HYDREL
628
4-3/4
(121)
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
6-1/4
(159)
NOTES:
1 120V only.
2 Separate ballast enclosure required.
3 Standard on metal halide lamps with GEB
ballasts.
4 Not all distribution available with all lamp
types, use NR when not choosing LPI on
PAR lamps.
5 SF is available with 120V, 277V or 347V on
HID only.
6 DF is available with 208V or 240V on HID
only.
7 GEB default if MVOLT selected; only valid
with metal halide lamps.
8 Only valid with yoke mount.
www.hydrel.com
PSG9
4650 KM
11-9/16
(295)
Options
Fusing
SF Single fuse5
DF Double fuse6
Ballast
GEB Electronic ballast7
Finish
BL
BZ
DDB
DNA
4650 YM
8-1/2
(216)
11-9/16
(295)
8-1/2
(216)
Accent Lighting
4709
Designed for installation where cost and reliability are paramount.
Head
Material
Socket
Mounting
Listings
Die-cast aluminum.
Pulse-rated medium-base.
1/2" NPT adjustable knuckle.
U.L., C.U.L., suitable for wet locations.
Lamp
Lens
Fasteners
Incandesent: PAR-38, 250W max. HID:
PAR-38,150W max.
Convex tempered glass (HID), lens
optional on Incandescent models.
Stainless steel.
Ordering Information
Example: 4709 P3870M 120 SP CLC SPCA LP BL
Product
Lamp type
Voltage
Distribution
Lens
4709
Incandescent1
120
208
240
277
347
120/277
TB
MVOLT3
NR No
reflector
SP Spot
FL Flood
CLA Convex lens
amber
CLB Convex lens
blue
CLG Convex lens
green
CLR Convex lens
red
CLC Convex lens
clear 4
P38100I
P38150I
Metal halide2
P3870M
P38100M
P38150M
P3870CM
P38100CM
Mounting
accessories
See page 631.
Accessories
Options
Lamp
Internal
IHL Internal
honeycomb louver
External
GS Glare shield
Fusing
SF Single fuse5
DF Double
fuse6
Ballast
GEB Electronic
ballast7
LP Lamp
installed
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
PSG9
9
(229)
5-3/8
(140)
5
(127)
www.hydrel.com
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
NOTES:
1 Incandescent models valid with 120V
only.
2 Separate ballast enclosure required for
HID models.
3 Standard on metal halide lamps with
GEB ballast.
4 CLC lens provided on all HID models, optional on incandescent.
5 SF available with 120V, 277V or 347V on HID
only.
6 DF available with 208V, 220V or 240V on HID
only.
7 Only available with metal halide lamps
and MVOLT voltage.
LANDSC
APE LIGHTING
LANDSCAPE
Intended Use
629
LANDSCAPE LIGHTING
Linear Floodlight
Intended Use
4750
T5 and T5HO lamp performance, high output symmetrical and asymmetrical distributions and simple
design, make the Hydrel 4750 Series ideal for spreading soft, even illumination along walls, signs
and planters.
Material
Socket
Lens
Extruded A360 aluminum with diecast aluminum end caps. All
fasteners are stainlesss steel.
G5 miniature bi-pin.
Curved high-strength, optical-grade
clear acrylic.
10 ft 18-3 STW (US) or 3M
3GX1.0mm HO7RN-F (IEC) flexible
cord. Cord length must be specified.
Brite™ cold weather options
available.
Mounting
Accessories
KM: knuckle mounted with two 1/2”
NPT side mounting arms. AWM:
adjustable wall mount with two side
mounting brackets and minimum of
External glare control available.
Electronic multi-volt, 0° F (-18° C)
minimum starting temperature.
Options
Listings
Tamper-proof hardware and Polar
U.L., C.U.L.
Voltage
Multi-volt (120V-277V 50/60 Hz).
Lamp
Distribution
Fluorescent, single or multiple T5
and T5HO to 54W per lamp.
Wall wash, narrow flood, medium
flood, vertical flood and wide flood.
Ordering Information
Product
4752
4753
4754
4756
4758
Example: 4754 54T5HO MVOLT MFL KM WMP FSS LP30K DNAT
Lamp type
Voltage
2
4752
14T5
2/14T5
24T5HO
2/24T5HO
4753
21T5
2/21T5
39T5HO
2/39T5HO
4754
28T5
2/28T5
54T5HO
2/54T5HO
4756
2/39T5HO
4/39T5HO
4758
2/28T5
4/28T5
2/54T5HO
4/54T5HO
Ballast
MVOLT
T5 miniature bi-pin
Two T5 miniature bi-pin1
T5 high output miniature bi-pin
Two T5 high output miniature bi-pin1
T5 miniature bi-pin
Two T5 miniature bi-pin1
T5 high output miniature bi-pin
Two T5 high output miniature bi-pin1
T5 miniature bi-pin
Two T5 miniature bi-pin1
T5 high output miniature bi-pin
Two T5 high output miniature bi-pin1
Two T5 high output miniature bi-pin
Four T5 high output miniature bi-pin
Distribution
WWD Wall wash
VFL Vertical
flood
NFL Narrow
flood
MFL Medium
flood
WFL Wide
flood3
Mounting
options
See page 631.
For runs or endto-end
mounting, see
www.hydrel.com.
Accessories4
Cord set length6
External
Finish
CSL__ 10’ - 50’
of cord,
available
in 5’
increments
FSS Flush
source
shield
FVSR Full
visor
DBLB
DSPD
DNAT
DWHG
HVSR Half
visor
Mounting
Options
KM Knuckle
mount
AWM Adjustable
wall mount
TPH Tamperproof
hardware
PLPK Polar pack
cold
weather
option5
Two T5 miniature bi-pin
Four T5 miniature bi-pin1
Two T5 high output miniature bi-pin
Four T5 high output miniature bi-pin1
4 -7/16
(113)
DDBT
DSPF
DSST
GN
SND
TVG
CF
Lamp
LPI Lamp
included7
LP30K 3000°K
lamp
included
LP35K 3500°K
lamp
included
LP41K 4100°K
lamp
included
2-5/16
(59)
4
(102)
1/2” NPT Stem
AWM
Designer black,
textured
Dark gray, textured
Natural aluminum,
textured
Designer white,
textured
Dark bronze, textured
Rust, textured
Sandstone, textured
Green
Sand
Terra verde green
Custom
NOTES:
1 Available with WFL distribution only.
2 MVOLT multi-volt ballast range: 120V277V, 50/60Hz.
3 WFL distribution only available with multiple lamp options as specified with note 1.
4 Accessories are mutually exclusive.
Choose one.
5 Polar pack cold weather is a patent-pending design that maintains T5HO lamp
temperature at 50° F (10° C) for optimum
light output. Consult www.hydrel.com
for more information.
6 Required for AWM mounting only. Specify
cord length in feet.
7 If LPI is chosen, default lamp is LP30K.
3
(76)
X
4750 SERIES LINEAR FLUORESCENT
4752
28
(711)
HYDREL
4753
630
KM
40
(1016)
4754
Consult www.hydrel.com for details.
51
(1295)
4758
102
(2591)
www.hydrel.com
PSG9
Accent, Linear Floodlighting
Accent, Linear Flood Mounting Options
4529
4610
4620
4630
4640
4650
4709
47501
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
2100
4511
4516
4519 4524
ARJB Architectural junction box
■
■
■
■
FJB Flush mounted junction box
■
■
■
JBA/JBB Junction box aluminum/bronze
■
■
■
MS/MSB Mounting spike steel/bronze (12" or 18" – 12 volt only)
■
■
PS/PSS Polymer ground spike open/sealed (18",24"36")2
■
■
■
■
■
■
■
No Ballast
■
PSSA Pedestal stanchion mount
SBA/SBB Stake box aluminum/bronze (12" or 18")3
SMSA Stanchion mount
__TRAS/__TRBS Tree strap4
WBC35R/WBC4O Wall box cover
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
5
■
■
■
■
■
■
■
■
■
■
3,5
5
WMC Wall mount cover3
■
■
■
■
■
WMSA Wall mount with integral splice box
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
WMP EA___ Wall mount plate for extended arm
■
■
■
■
■
■
■
■
■
■
■
■
WMP EAS___ Wall mount plate with extended arm strut
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
WMSA EA___ Wall mount with extended arms
■
WMP Wall mount plate
LANDSCAPE LIGHTING
■ = option available
Ballast
AGB Above ground ballast (175-watt max. – remote)
BPCA/BPCB Big polymer combo box (175-watt max.)
■
■
■
BPTA Big polymer transfomer box (300-watt max. low voltage)
BSB EA__ Big surface box with extended arms (175-watt max.)
BSBTS Big surface box with tree strap (175-watt max.)5
■
CBA/CBB Combo box (175-watt max.)
■
EBA/EBB Encapsulated ballast box (100-watt max.)
■
RACB Round aluminum combo box (100-watt max.)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■5
■
■
■5
■5
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■5
■5
■
■
■5
■5
■
■
■
■
■
■
■
■
SCA/SCB Small transformer box, aluminum or bronze (75-watt max.)
■
■
■
SPCA Small polymer combo box (70-watt max.)
■
■
■
SSB Small surface box (70-watt max.)
■
■5
5 Will accept two fixtures per mounting. To order with
the fixture put 2/ in the lamp type category for example: 4511 2/M35 12 SP WBC 4O DNA.
Visit www.hydrel.com for detailed information on any of
the mounting options.
www.hydrel.com
5
■
Reminder: Transformer or HID ballast not included (excluding 4620 M50, 4750). Please
remember to order a ballast or transformer box.
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
■
■
NOTES:
1 Two of the selected mounting boxes will be provided.
2 PS available in 12V only.
3 Knuckle mount fixtures only.
4 Specify up to 4 junction boxes per strap.
■
■
■
■
TRMT Tree mount transformer
■
■
■
■
■
■
■
5
SSBTS Small surface box with tree strap (70-watt max.)
■
5
5
SSB EA__ Small surface box with extended arms (70-watt max.)
PSG9
■
■
■
■
BSB Big surface box (175-watt max.)5
■
631
LANDSCAPE LIGHTING
Step Lighting
Intended Use
4451
4452
4453
For use in outdoor wet locations, such as patios and pathways at hospitals, hotels, schools, airports
and parking garages.
Material
Socket
Lens
Accessories
Cast aluminum or cast bronze.
Aluminum body black permabarred.
Incandescent: Medium screw base
Fluorescent: 2G7 or GX24Q-1 base.
Louver door, 45° cut-off.
Lamp
Ballast
Diffused, tempered glass for nonlouvered door. Clear, tempered glass
for louvered door.
Incandescent: 40W max, A19 lamp.
Fluorescent: single or double 13W max
CFL twin tube or double twin tube.
Fluorescent: electronic ballast high
frequency with 0° F (-18° C)
minimum starting temperature.
4451
4452
4453
Material
A
B
Aluminum
Bronze
3/4" NPT side entries standard.
U.L., CSA, suitable for wet locations.
Lamp type
Voltage
Incandescent
40I 1
Fluorescent
7TT
9TT
13DTT
2/7TT2
2/9TT2
2/13TT2
120
277
347
Accessories
10-1/2
(267)
4452
LPI Lamp included
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray
Sand
Steel gray
Terra verde green
White
Custom
4-9/16
(113)
3
(116)
10-1/4
(260)
4-7/16
(113)
5-1/4
(133)
NOTES:
1 Incandescent models available with 120V
only.
2 Only available with 4452.
3 Only available with 4451.
4
(102)
10-1/4
(260)
4453
Lamp
External
LLV Louver door
Internal3
IPL Parallel louver
5-3/8
(136)
HYDREL
Listings
Example: 4451 A 13DTT 120 LPI SND
4451
632
Stainless steel.
Conduit Entries
Ordering Information
Product
Fasteners
3-7/8
(98)
3-3/4
(95)
www.hydrel.com
PSG9
Step Lighting
4454
4456
For use in outdoor wet locations, such as patios and pathways at hospitals, hotels, schools, airports
and parking garages.
Material
Ballast
Lens
Fastener
Cast aluminum or cast bronze.
Aluminum body black permabarred.
HID: Magnetic ballast high power
factor with -20° F (-29° C) minimum
starting temperature. Fluorescent:
electronic ballast high frequency
with 0° F (-18° C) minimum starting
temperature.
Diffused, tempered glass for nonlouvered door. Clear, tempered glass
for louvered door.
Stainless steel.
Lamp
HID: 50W max, E17 lamp.
Socket
Listings
U.L., CSA, suitable for wet locations.
Conduit Entries
LANDSCAPE LIGHTING
Intended Use
3/4" NPT side entries standard.
Medium screw base, pulse-rated.
Ordering Information
Product
4454
4456
Material
A
B
Aluminum
Bronze1
Example: 4456 A 42TRT 120 EL N LPI DDB
Lamp type
Voltage
Incandescent
75I2,3
Fluorescent3
18TRT
26TRT
32TRT
42TRT
Metal halide
50M
High pressure sodium
35S2
50S
120
277
347
External
LLV Louver
door
Lamp
LPI Lamp
included
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
8-5/8
(219)
4
(102)
5-1/4
(133)
13
(330)
6-1/2
(165)
6
(152)
www.hydrel.com
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
10-1/4
(260)
4456
PSG9
EL N NICAD
battery
backup
EL N SD NICAD
battery
backup self
diagnostic
WH
CF
4454
NOTES:
1 Not available with the 4456.
2 Available in 120V only.
3 Not available with 4454.
4 Only available with fluorescent lamps.
Options3,4
Accessories
633
LANDSCAPE LIGHTING
Step Lighting
Intended Use
4462
Meets installation requirements for wood and all (insulation) type IC applications. Fixtures are
completely weatherproof with neoprene gasket and tempered lens.
Quartz halogen: T-4 75W max.,
120V. Low voltage: (2) MR-16, 35W
max. each.
Gasket
while totally submerged in water.
Heavy wall cast bronze construction.
Natural bronze finish.
Single piece, molded U-shaped
silicone.
Fasteners
Niche
Socket
Cord
Stainless steel with cast bronze
mounting frame which has
provisions for locking fixture into
position. Single conduit entrance is
3/4" NPT with 3/4" x 1/2" NPT
reducer bushing.
Incandescent: medium base. Quartz
Halogen: Mini-can screw base. Low
Voltage: Gx5.3 bi-pin.
Minimum of 35 ft of #16-3ST
submersible rated cord. Cord
entrance is brass water-tight seal
and epoxy encapsulated. Cord length
must be specified.
Fixture Housing and Door
Lamp
Lens
Tempered borosilicate diffuse glass
standard. Clear tempered
borosilicate glass.
Listings
U.L., C.U.L., IP67.
Factory Leak Tested
Fixtures are tested at 10 PSI
(0.70kg/cm2) internal pressure
Incandescent: A-19 90W max., 120V.
Ordering Information
Example: 4462 2/M35 12 FL RG CSL50 LPI
Product
Lamp type
Voltage
4462
Incandescent
90I
Quartz
75Q
Low voltage
2/M35
121
120
Distribution
NR
SP
NSP
FL
NFL
WFL
No reflector2
Spot2
Narrow spot2
Flood
Narrow flood2
Wide flood2
11
(279)
HYDREL
5-3/8
(137)
634
Stainless steel.
www.hydrel.com
Accessories
External3
RG Rock guard
LLV Louver
6-7/8
(175)
Cord set length
Lamp
CSL ___ 35’-120’ of cord4
LPI Lamp
included
NOTES:
1 Transformer sold separately.
2 Only available with 2/M35.
3 Accessories are mutually exclusive.
Choose one.
4 CSL50 is maximum length for 12V fixtures.
PSG9
Border Lighting
M4534
This unique style, and distinctive fixture is ideal for installation in sidewalks or promenades –
designed to be recessed in concrete, flush to lower rim.
Material
Cast aluminum housing with integral
24 in3 junction box (incandescent) or
ballast box (HID, fluorescent).
Lamp
Incandescent: 60W max., A-15 or T10/tubular. 100Q (Quartz) 100W
max., T-4/tubular. HID:100W max.,
E-17/elliptical or T6/G12.
Fluorescent: 32TRT, 32W max.
Socket
Quartz: mini-can base. Fluorescent:
Gx24q-3 base. HID, Incandescent:
pulse-rated medium base.
Lens
bottom openings available.
Molded, tempered, borosilicate.
Glare Control
Gasket
Black finish Glarefoil™ included.
Molded silicone.
Listings
Conduit Entries
U.L., C.U.L.
Two 3/4" NPT, 1/2" NPT side or
Ordering Information
Example: M4534 70CMT6 MVOLT 34S MILS180 GEB LPI STG
Product
Lamp type
Voltage
Conduit entry
Accessories
M4534
Incandescent1
60I
100Q
Fluorescent
18TRT
26TRT
32TRT
Metal halide
50M
70M
100M
Ceramic metal halide
35CMT6
70CM
70CMT6
100CM
High pressure sodium
35S
50S
70S
100S
120
208
240
277
347
MVOLT2
12B 1/2” NPT
bottom
12S 1/2” NPT side
34B 3/4” NPT
bottom
34S 3/4” NPT side
MILS90 Internal 90° light
shield
MILS180 Internal 180°
light shield
PSG9
Options
Fusing
SF
DF
Ballast5
GEB
MLEBAD
Single fuse3
Double fuse4
Electronic
ballast
Electronic
dimming ballst6
Lamp
LPI Lamp
included
Finish
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
9-1/2
(242)
5-1/4
(133)
10-1/2
(261)
www.hydrel.com
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
NOTES:
1 Only available in 120V.
2 MVOLT is only available with fluorescent
and metal halide lamps with GEB or
MLEBAD options.
3 SF available with 120V, 277V or 347V and
HID only.
4 DF available with 208V or 240V and HID
only.
5 Only available with metal halide lamps
and MVOLT voltage.
6 O-10V dimmer not included.
LANDSCAPE LIGHTING
Intended use
635
LANDSCAPE LIGHTING
Border Lighting
Intended Use
4540
This unique and distinctive fixture has been custom designed for installation along park walkways
and sidewalks.
Material
Socket
Lens
The bollard section is fabricated
from heavy cast aluminum.
Pulse-rated medium base.
Molded tempered glass. 90° cutoff
with internal louver.
Lamp
Injection-molded ABS, U.V.
stabilized, impact and corrosionresistant for use in all types of
environments.
Rough-In Section
HID:100W max., E-17/elliptical or
T6/G12.
through-branch wiring, this box has
24 in3 of volume.
Power Module
Conduit Connection
Sealed unit encapsulated in an
engineered composite resin to
eliminate all water entry.
Two 3/4" NPT bottom openings are
standard in the cast aluminum
integral junction box. Suitable for
Ordering Information
Example: 4540 70M 277 34B LP BL
Product
Lamp type
Voltage
4540
Metal halide
50M
70M
Ceramic metal halide
35CMT4
35CMT6
70CM
70CMT4
70CMT6
120
208
240
277
347
MVOLT1
Conduit entry
34B
12B
Accessories
3/4” NPT
bottom
1/2” NPT
bottom
Options
MILS90 Internal 90°
light shield
MILS180 Internal 180°
light shield
Fusing
SF
DF
Ballast4
GEB
MLEBAD
Single fuse2
Double fuse3
Electronic ballast
Electronic
dimming ballast5
Lamp
Finish
LP Lamp
installed
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural
aluminum
Green
Gray
Sand
Steel gray
Terra verde
green
White
Custom
8.86
(225)
3-1/2
(88.9)
12
(304.8)
Single Tamper-Proof
Retaining Screw
HYDREL
10
(254)
12-1/2
(317.5)
636
NOTES:
1 MVOLT is only available with GEB and
MLEBAD options.
2 SF available with 120V, 277V or 347V and
HID only.
3 DF available with 208 or 240 volts and HID
only.
4 Only available with MVOLT voltage.
5 O-10V dimmer not included.
18
(457.2)
www.hydrel.com
PSG9
Border Lighting
M9450
Pathway and marker lights are multi-purpose units designed for high-traffic areas to be mounted in a
variety of substrates. The M9460 Series also is suitable for drive-over applications.
Pathway Light
See www.hydrel.com for more details.
M9460
LANDSCAPE LIGHTING
Intended Use
Marker Light
Ordering Information
Example: M9450 18TRT MVOLT 12B LP SND
Product
Lamp type
Voltage
Conduit entry
M9450
Incandescent1
75Q
Fluorescent
18TRT
26TRT
32TRT
Metal halide
70M
Ceramic metal halide
35CMT6
70CM
70CMT6
120
208
240
277
347
MVOLT2
12B 1/2” NPT
bottom
12S 1/2” NPT
side
34B 3/4” NPT
bottom
34S 3/4” NPT
side
1B 1” NPT
bottom
Accessories
M9460
Lamp type
NOTES:
1 Only available in 120V.
2 MVOLT is only available with fluorescent and
metal halide lamps.
3 SF available with 120V, 277V or 347V and HID
only.
4 DF available with 208V or 240V and HID only.
5 Only available with HID lamps and MVOLT
voltage.
6 O-10V dimmer not included.
7 Low voltage only, transformer sold separately.
PSG9
BL
BZ
DDB
DNA
GN
GR
SND
STG
TVG
WH
CF
Black
Bronze
Dark bronze
Natural aluminum
Green
Gray7
Sand
Steel gray
Terra verde green
White
Custom
Example: M9460 100CM 120 34B LP TVG
Voltage
7
12
120
208
240
277
347
MVOLT2
Conduit entry
Accessories
12B 1/2” NPT
bottom
12S 1/2” NPT side
34B 3/4” NPT
bottom
34S 3/4” NPT side
1B 1” NPT
bottom
XLS Extermal glare shield
2XLS (2) exteral glare
shields
Options
Fusing
SF
DF
Ballast5
GEB
MLEBAD
Single fuse3
Double fuse4
Lamp
LP Lamp
installed
Electronic
ballast
Electronic
dimming
ballast6
M9450
M9460
9
(229)
4
(102)
13-1/8
(334)
2-1/4 (57)
3 (76)
15-7/8
(403)
15-7/8
(403)
www.hydrel.com
Finish
BL
BZ
DDB
DNA
Black
Bronze
Dark bronze
Natural
aluminum
GN Green
GR Gray7
SND Sand
STG Steel gray
TVG Terra verde
green
WH White
CF Custom
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
Low voltage
50QT3
Incandescent1
75Q
Ceramic metal halide
35CMT4
35CMT6
70CMT4
70CMT6
70CM
100CM
Finish
LP Lamp
installed
Fusing
SF Single fuse3
DF Double fuse4
Ballast5
GEB Electronic
ballast
MLEBAD Electronic
dimming
ballast6
Ordering Information
Product
Lamp
Options
MILS90 Internal 90° light
shield
MILS180 Internal 180° light
shield
637
LANDSCAPE LIGHTING
Border Lighting
4595
4596
4597
4598
Intended Use
The graceful mushroom garden light is ideal for lighting flower beds, low planter areas, walkways
and driveways, or any area where an unobstructed circular field of light is desired.
Material
Lamp
Socket
Lens
Heavy-gauge cast bronze body
with spun copper canopy.
Quartz T3 20W max.
G4 bi-pin
Glass
Ordering Information
Product
4595
4596
4597
4598
Example: 4595 20QT3 12 JBA LPI VBL
Lamp type
Accessories
Voltage
20QT3
12
NOTES:
1 Low-voltage transformer sold separately.
2 Vendor-supplied finish. Consult factory
for details.
1
JBA J-box, aluminum
JBB J-box, bronze
4595
Finish2
Lamp
LPI Lamp
included
VBL
VBZ
VGN
VTVG
VWH
Black
Bronze
Green
Terra verde green
White
4596
8
(203)
10-3/4
(273)
17-5/8
(448)
18-7/8
(479)
13-7/8
(352)
13-7/8
(352)
4597
4598
8
(203)
14
(356)
17-5/8
(448)
17-3/4
(451)
HYDREL
13-7/8
(352)
638
www.hydrel.com
14
(356)
PSG9
Ground or Wall Mounting
4-5/8
(117)
2-7/8
(73)
WBC40
6
(152)
6
(152)
7/8
(23)
7/8
(23)
2-1/2
(63)
4-1/8
(105)
3-1/4
(83)
6
(152)
ARJB
4-3/4
(121)
4-1/8
(105)
4-1/5
(107)
FJB
18
(457)
2-3/4
(70)
SMSA
JBA
JBB
18
(458)
8-1/4
(209)
7
(179) 3-78
(99)
8-1/8
(207)
SPCA
PS
6
(153)
PSS
SBA18
SBB18
SBA12
SBB12
10
(254)
7-1/8
(181)
5-1/8
(130)
4-1/4
(102)
4
(102)
4-1/4
(108)
5
(127)
9-1/2
(241)
TRMT
12-1/2
(216)
4-1/8
(104)
EA (HID 100 -175 Watt)
on
BSB
SCA
SCB
4-1/8
(105)
8-7/8
(224)
12-1/4
(311)
2-3/8
(61)
2-3/8
(61)
BSB
EBB
EBA
SSB
12
(305)
9
(229)
2-1/4
(57)
EA45 (HID 100 -175 Watt)
on
BSB
12-1/4
(311)
6
(152)
12
(305)
12-1/4
(311)
EA90 (HID 100 -175 Watt)
on
BSB
6
(152)
12
(305)
9
(229)
2-1/4
(57)
12-1/4
(311)
12-1/4
(311)
12-1/4
(311)
6
(152)
6
(152)
24
(610)
24
(610)
12-1/4
(311)
24
(610)
9
(229)
2-1/4
(57)
12-1/4
(311)
12-1/4
(311)
6
(152)
6
(152)
36
(914)
36
(914)
36
(914)
9
(229)
2-1/4
(57)
8-7/8
(224)
EA (LV, HID 35 -70 Watt)
on
SSB
12
(305)
EA45 (LV, HID 35 -70 Watt)
on
SSB
8-7/8
(224)
6
(152)
12
(305)
8-7/8
(224)
12
(305)
6
(152)
24
(610)
6
(152)
8-7/8
(224)
6
(152)
36
(914)
9
(229)
2-1/4
(57)
EA45 (Incan)
on
WMSA
24
(610)
9
(229)
6
(152)
36
(914)
EA (Incan)
on
WMSA
8-7/8
(224)
6
(152)
8-7/8
(224)
36
(914)
6
(152)
12
(305)
9
(229)
24
(610)
2-1/4
(57)
8-7/8
(224)
6
(152)
6
(152)
12
(305)
2-1/4
(57)
EA90 (Incan)
on
WMSA
6
(152)
12
(305)
9
(229)
6
(152)
24
(610)
2-1/4
(57)
6
(152)
24
(610)
9
(229)
6
(152)
36
(914)
www.hydrel.com
6
(152)
36
(914)
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
24
(610)
EA90 (LV, HID 35 -70 Watt)
on
SSB
8-7/8
(224)
8-7/8
(224)
PSG9
5-7/8
(148)
BPCA
BPCB
12-1/4
(311)
36
(914)
T1903
6-1/2
(165)
CBA
CBB
4-1/2
(114)
4
(102)
6
(153)
AGB
9
(229)
TRAS
TRBS
WMSA
10-1/2
(267)
9-1/2
(241.3)
9-1/4
(235)
5
(235)
MS12
MSB12
12
(305)
7-3/8
(187)
5-3/4
(146)
BPTA
MS18
MSB18
8-7/8
(226)
7-3/8
(187)
TRA
TRB
8-1/8
(206)
PSSA
8
(205)
7-3/4
(197)
20-1/4
(514)
7
(178)
4-1/5
(107)
12
(305)
6-1/2
(165) 3-1/4
(83)
18
(457)
18-1/4
(464)
12
(305)
3
(75)
1
(25)
6
(152)
WMC
12
(305)
6
(152)
3
(75)
WBC35R
1/2
(12.7)
4-1/4
(108)
3
(75)
3
(75)
2-1/2
(63)
6
(152)
3-3/4
(95)
MOUNTING
4-1/8
(105)
NOTES:
For WMP, SSBTS, BSBTS and RACB, see www.hydrel.com.
639
MOUNTING
Ground, Wall or Pole Mounting
2-3/4
(70)
3-3/4
(95)
1
(25)
4-1/5
(107)
3-1/4
(83)
4-1/8
(105)
6
(152)
6
(152)
4-1/8
(105)
ARJB
Architechtural
Junction Box
WMSA
Wall Mount
FJB
Flush Mount
Junction Box
3-1/4
(83)
2-1/4
(57)
6
(152)
5
(127)
18
(457)
3-3/4
(95)
EWM
Extended Wall Mount
PMSA
Pole Mount
3-1/2
(89)
24
(610)
6
(152)
7
(178)
TRJB
Tree Mount
6
(152)
6
(152)
6-1/2
(165)
18
(457)
18
(457)
5-1/2
(140)
6
(152)
6
(152)
6
(152)
SMSA
Stanchion Mount
SMT
Stanchion Mount Tee
3-1/2
(89)
3
18 24
(304) (457) (608)
PAR4 / PAS4
Pole Arm Round
Pole Arm Square
3-5/8
(92)
6
(152)
6
(152)
24
(610)
3-1/2
(89)
7
(178)
6-1/2
165
3-1/2
(89)
6
(152)
3
18 24
(304) (457) (608)
PSSA
Pedestal
Stanchion Mount
PATR4 / PATS4
Pole Arm Twin Round
Pole Arm Twin Square
3-5/8
(92)
HYDREL
PMT
Pole Mount Tee
6
(152)
5-1/2
(140)
640
www.hydrel.com
PSG9
Surface Mount Ballast
SMBTNM
Tenon Mount
Knuckle /Yoke
SMBEWM
Extended
Wall Mount
Knuckle / Yoke
6-1/2
(165)
6-1/2
(165)
27-1/2
(698)
10-1/2
(267)
6-1/2
(165)
8-3/16
(208)
19
(483)
6-1/2
(165)
SMB
SMB
Yoke
19
(483)
6-1/2
(165)
8-3/16
(208)
6-1/2
(165)
19
(483)
8-3/16
(208)
19
(483)
18-1/4
(464)
9-1/2
(241)
SMBR
Remote mount
(Can be used for a
wide variety of
mounting
placements.)
Knuckle
8-3/16
(208)
18-1/4
(464)
9-1/2
(241)
8-3/16
(208)
MOUNTING
(Ballast or Transformer Included)
6-1/2
(165)
SMBSMT
Stanchion Tee Mount
Knuckle / Yoke
6-1/2
(165)
6-1/2
(165)
22
(559)
22
(559)
6
(152)
38
(965)
6
(152)
38
(965)
8-3/16
(208)
SMBSMSA
Stanchion Mount
Knuckle / Yoke
SMBPMT
Pole Tee Mount
Knuckle / Yoke
9-1/2
(241)
9-1/2
(241)
9-1/2
(241)
8-3/16
(208)
6-1/2
(165)
6-1/2
(165)
31-1/4
(794)
38
(965)
31-1/4
(794)
6-1/2
(165)
8-3/16
(208)
PSG9
www.hydrel.com
38
(965)
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
9-1/2
(241)
641
MOUNTING
Brackets (for Pole/Tenon Mounts)
Brackets – Must be ordered with pole to insure proper fit. For use with Hydrel poles or stanchions only.
15"
41-1/2"
RSA Pole – mount to T25 2-7/8" OD tenon
Part Number
EPA
Weight
HYDRBA 28
1.2
7.0
HYDRBA 32
1.7
14.3
HYDRBA 38
1.9
10.5
HYDRBA48
2.7
14.5
HYDRBA 49
2.2
17.5
24"
30"
15"
30"
HYDRBA38
HYDRBA28
HYDRBA32
30"
15"
34"
15"
24"
30"
HYDRBA48
HYDRBA49
6"
SSA Pole – brackets flush mount on 4" or 5" poles.
For use with internal sleeve, plain open top poles.
Part Number
EPA
6"
30"
18"
2-3/8"O.D.
Weight
HYDSBA28
.90
12
HYDSBA38
1.5
17
HYDSBA48
2.25
22
HYDSBA49
1.7
22
30"
30"
HYDSBA38
18"
15"
15"
3"Sq.
2-3/8"O.D.
HYDSBA28
6" 30"
HYDSBA48
2-3/8"O.D.
3"Sq.
3"Sq.
34"
24"
6"
HYDSBA49
2-3/8"O.D.
3"Sq.
120˚
RSS Pole – requires T20 or TC stanchion mount
Part Number
EPA
Weight
HYDBS28
1.0
21.00
HYDBS32
1.3
34.00
HYDBS38
1.6
32.00
HYDBS48
2.3
44.00
HYDBS49
1.6
44.00
HYDBS28
HYDBS32
Removable
Cap
36"
12"
41"
1/2"
2-3/8" O.D.Tubing
24"R
(3) 3/8" x 1/2"
set screws @120˚
HYDBS38
HYDBS49
HYDBS48
30"
90˚
30"
15"
30"
15"
30"
12"
24"R
34"
1/2"
2-3/8" O.D.Tubing
(3) 3/8" x 1/2"
set screws @120˚
HYDREL
642
Part Number
EPA
Weight
HYDSBS28
1.1
30.00
HYDSBS38
1.7
42.00
HYDSBS49
2.1
45.00
SBS38
SBS28
SSS Pole – requires T20 or TC stanchion mount
SBS49
30"
30"
42"
Tenon
4" x 2.375" Dia.
Removable
Front Cap
Tenon
4" x 2.375" Dia.
(4) 0.375"-16
Set Screws
www.hydrel.com
Removable
Front Cap
30"
Tenon
4" x 2.375" Dia.
(4) 0.375"-16
Set Screws
(4) 0.375"-16
Set Screws
Removable
Front Cap
PSG9
Poles: For detailed technical information, EPAs and wind map, please visit www.hydrel.com.
Ordering Information
Type
HYDSSAG2 Square
straight
aluminum
G2
HYDSSA
Square
straight
aluminum
HYDSSS
Square
straight
steel
HYDRSA
Round
straight
aluminum
HYDRSS
HYDSSA
Round
straight
steel
Height
10-16
8-35
10-39
8-30
8-35
Example: HYDSSAG2 16 3.75 J T20 DDB
Nominal shaft base size (in.)
wall thickness (in.)
3.75
4
5
6
4
5
6
4
4.5
5
6
4
4.5
5
J
.250
C.
G
J
C
G
.125
.188
.250
.125
.188
C
E
G
.125
.156
.188
B
1.20
Fixture mounting method1
Mounting
PT Open top
Tenon mounting
T20 2-3/8" O.D.
T25 2-7/8” O.D.
Drill mounting
G2XTEND
DM19G2 Single luminaire drilling
DM28G2 Two luminaires at 180°
DM29G2 Two luminaires at 90°
DM39G2 Three luminaires at 90°
DM49G2 Four luminaires at 90°
8100/8200 PM
DM19AS Single luminaire drilling
DM28AS Two luminaires at 180°
DM29AS Two luminaires at 90°
DM39AS Three luminaires at 90°
DM49AS Four luminaires at 90°
HYDSSS
Options
PER
L/AB
VD
TP
H__
FDL__
FGL__
HH__
NEMA twist-lock
receptacle only located
at pole top2
Less anchor bolts
Vibration damper
Tamper-proof screws
provided with base
cover
Horizontal arm3,4
Festoon duplex outlet
less electrical3
Festoon GFI outlet less
electrical3
Extra handhole3,5
MOUNTING
MOUNTING
Poles
Finish
Standard colors
BL Black
BZ Bronze
DDB Dark bronze
DNA Natural aluminum
GN Green
GR Gray
SND Sand
STG Steel gray
TVG Terra verde green
WH White
Designer colors
DBLB Designer black,
textured
DSPD Dark gray, textured
DNAT Natural aluminum,
textured
DWHG Designer white,
textured
DDBT Dark bronze, textured
DSPF Rust, textured
DSST Sandstone, textured
CF Custom
HYDRSA
18"
HYDRSS
CAUTION: This pole selection process is a guideline only. Hydrel and Acuity Brands
Lighting assumes no responsibility for selection and recommends consultation with
qualified individuals for verification of luminaire/pole assembly selection.
PSG9
www.hydrel.com
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
NOTES:
1 When ordering tenon mounting and drill mounting for the same pole,
follow this example: DM28G2/T20. The combination requires an extra handhole.
2 NEMA twist-lock photo control by others. Not available with tenon mounting.
3 Must specify location and orientation when ordering an option.
For 1st space _ : Specify the height in feet above base of pole.
Example: 5ft = 5 and 20ft = 20
For 2nd space _ : Specify orientation from handhole (A,B,C,D)
Refer to the handhole orientation diagram on this page.
4 Horizontal arm is 18" x 2-3/8" O.D. tenon standard.
5 Combination of tenon-top and drill mount requires extra handhole.
643
UNDER
WATER
UNDERW
Fountain and Swimming Pool
Intended Use
4428
Swimming pool, reflection pool and fountain pool lights. This175W metal halide fountain light, the
first HID underwater light in the industry, delivers the equivalent light output of a 1000W Quartz
halogen lamp while consuming only one-fifth the power and attaining 2-1/2 times longer lamp life.
Features
The industry’s first 175W metal
halide swimming pool and fountain
light provides light output
equivalent to a 1000W incandescent
lamp but uses only one-fifth the
power, with more than two times
the lamp life.
Lens
Listings
Ballast
Tempered borosilicate clear lens and
silicone gaskets.
U.L., submersible or wet/dry listed
fountain (submersion not required
for safe operation).
Metal halide ballast encapsulated
and contained in fixture. Heavy wall
cast bronze construction.
Ordering Information
Reflector
Fountain light provides three
reflectors – a 7° spot, a medium
flood and a wall wash.
Example: 4428 SS 175M 120 NM 34B CSL120 SWM LP
Swimming pool or niche mount fountain application.
Product
Door
Lamp type
Voltage
4428
B Bronze
SS Stainless
steel trim
175M
120
Mounting
Conduit
NM Niche mount
34B 3/4” NPT bottom
Ordering Information
Cord set length
Application
Lamp
CSL ___ 35’-120’ of cord
available in 5’
increments
SWM Swimming pool
LP Lamp installed
Example: 4428 175M 120 FL FLC BM CSL100 LP
Base mount fountain application.
Product
Lamp type
Voltage
4428
WD4428
175M
120
Distribution
SP Spot
FL Flood
WWD Wall wash
Lens
Mounting
FLC Flat lens clear
FLC5 Flat lens 5° axial
spread
BM Base
mount
4428
Accessories
IHL Internal honeycomb
louver
ISS Internal source shield
WWL Wall wash louver
CFAMB Color filter amber
CFBLU Color filter blue
CFGRN Color filter green
CFRED Color filter red
Cord set length
Lamp
CSL ___ 10’-120’ of cord
available in 5’
increments
LP Lamp
installed
11-3/8 Dia.
(287)
8-7/8 Dia.
(225)
1-3/8
(35)
Finish Plaster
5-7/8
(149)
13
(287)
HYDREL
Finish
Plaster
644
11-3/4
(298)
10-1/2
(265)
Niche
9
(229)
Base
www.hydrel.com
PSG9
Swimming Pool
Swimming Pool
4425 NM SWM
4427 NM SWM
4800 NM SWM
Swimming pool fixtures. Maximum wattages of each lamp type listed. Lower wattages available;
consult www.hydrel.com for more information.
Ordering Information
Product
4425
Door
Example: 4425 B P56300ILV 12 WFL CLS NM 1B CSL50 SWM LPI
Lamp type
B Bronze
SS Stainless
steel bezel
Voltage
1
Low voltage
P56300ILV
Incandescent
P56500I
2
12
120
Distribution3
MFL Medium
flood
NSP Narrow
spot
WFL Wide
flood
Lens
CLS
CLSA
CLSB
CLSG
CLSR
Mounting
Convex lens swim
NM Niche
mount
Convex lens swim amber
Convex lens swim blue
Convex lens swim green
Convex lens swim red
Ordering Information
Door
Lamp type
Voltage
Distribution3
4427
B Bronze
SS Stainless
steel
Incandescent
P641000I
P56500I
120
MFL Medium
flood
NSP Narrow
spot
WFL Wide
flood
Door type
RD Round
SQ Square
Door
Cord set length
CSL ___ 35’-120’
of cord
available
in 5’
increments
Mounting
Lens
Conduit
Application
Lamp
Application
CSL ___ 35’-120’
of cord
available
in 5’
increments
Lamp
Options
SWM Swim- LPI Lamp
CSA CSA
included
ming
Certified
pool
Example: 4800 RD B M75 12 FL CL NM 3445B CSL50 SWM LP
Lamp type
B Bronze Low voltage1
SS Stainless
M75
steel
Incandescent
100Q
150Q
Voltage
Distribution
122
120
FL Flood4
Lens
Mounting
Conduit
Application
Lamp
Options
3445B 3/4”
NPT
at 45°
SWM Swimming
pool
LP Lamp
installed
CSA CSA
Certified
Cord set length2
CSL ___ 35’-120’ of cord
available in 5’
increments
SQ
4800
RD
4427 NM
4425
5-1/2
(140)
5-1/2"
(140)
13
(330)
13
(330)
10-7/8
(276)
10-7/8
(276)
5/8
(16)
7-11/16
(195)
4-3/4 6-1/4
(121) (159)
5/8
(16)
www.hydrel.com
7-11/16
(195)
6-7/8
(175)
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
NM Niche
CL Convex lens
mount
CLA Convex lens
amber
CLB Convex lens blue
CLG Convex lens
green
CLR Convex lens red
CLC Convex lens clear
NOTES:
1 12V only; transformer sold separately.
2 50 foot maximum cord length on 12V fixtures.
3 Distributionsbased on available lamps.
4 Only available with M75 lamp, otherwise
leave blank.
PSG9
Options
SWM Swim- LPI Lamp
CSA CSA
ming
included
Certified
pool
Cord set length
NM Niche 34B 3/4”
CLS Convex lens swim
mount
NPT
CLSA Convex lens swim
bottom
amber
CLSB Convex lens swim blue
CLSG Convex lens swim green
CLSR Convex lens swim red
Ordering Information
4800
Conduit
120 volt only
34B 3/4” NPT
bottom
12 volt only
1B 1” NPT
bottom
Example: 4427 B P641000I 120 MFL CLS NM 34B CSL50 SWM LPI
Product
Product
UNDERW
UNDER
WATER
Intended Use
645
UNDER
WATER
UNDERW
Fountain
Intended Use
4409 BM
4413 BM
4415 BM/YM
Lighting for fountains and reflecting pools – base/yoke mount.
Ordering Information
Example: 4409 100QT3 120 FLC BM CSL120 LP
Model
Lamp type
Voltage
Lens
4409
75QT3
100QT3
121
120
FLC Flat lens clear
Mounting
Cord set length
Accessories
BM Base mount
DCFAMB
DCFBLU
DCFGRN
DCFRED
Color filter amber
Color filter blue
Color filter green
Color filter red
Ordering Information
Lamp type
Voltage
4413
100Q
150Q
150QT3
200QT3
250Q
300QT4
400QT4
500Q
120
Mounting
Lens
Distribution
FLC
FLAM
FLG
FLR
SP Spot
FL Flood
BM Base
mount
Flat lens clear
Flat lens amber
Flat lens green
Flat lens red
Ordering Information
4415
Lamp type
Incandescent
116I
Quartz
200QT3
300QT3
Low voltage
3/M50 2,6
3/M75 2,6
LP Lamp included
Example: 4413 500Q 120 FL FLC BM CSL80
Model
Model
Options
CSL ___ 10’-120’ of cord
available in 5’
increments5
Cord set length
Lamp
Options
CSL ___ 10’-120’ of cord
available in 5’
increments
LPI Lamp
included
CSA CSA
Certified
Example: 4415 3/M50 12 FL BM ALB RSR12 CSL40 LPI
Voltage
1
12
120
Distribution2
FL Flood
Cord set length2
Mounting accessories3
Mounting
BM Base mount
YM Yoke mount*
ALB Adjustable locking
base
RSR 4”-24” riser stem
available in 2”
increments4
* Consult
www.hydrel.com
for yoke mount
dimensions.
4409
CSL ___ 10’-120’ of cord
available in 5’
increments5
8-13/16
(224)
Options
LPI Lamp included
CSA CSA
Certified
NOTES:
1 Transformer sold separately.
2 Other distributions available for the 3/M50
and the 3/M75 only.
3 Available with base mount only.
4 RSR6 default with ALB.
5 50’ max cord length for 12V fixtures.
6 Available in 12V only.
4413
4-1/2" Dia
(114)
Lamp
7-1/2
(191)
4415
10-1/2
(267)
HYDREL
4-3/4"
(121)
646
6-1/4"
(159)
Fixture is height
adjustable
4-1/4 Min.
(108)
6" Dia
(152)
www.hydrel.com
3/4 Typ.
(19)
6-5/8 Max.
(168)
4-9/16
(116)
9-1/4
(235)
5-3/8
(137)
3-1/4
(83)
5-1/2
(140)
1
(25)
10
(254)
10
(254)
PSG9
Fountain
4424 BM/YM
4427 BM/YM
4800 BM/YM
Lighting for fountains and reflecting pools – base/yoke mount.
Ordering Information
Example: 4424 P56500I 120 MFL CLC YM CSL120 LPI
Model
Lamp type
Voltage
Distribution3
4424
Incandescent
P56300I
P56500I 1
Low voltage2
P56240ILV
P56300ILV 1
12
120 2
MFL Medium
flood
NSP Narrow
spot
WFL Wide
flood
CLC
CLA
CLB
CLG
CLR
Mounting accessories5
Cord set length
Lamp
Options
ALB Adjustable locking base
RSR 4”-24” riser stem
available in 2”
increments6
CSL ___ 10’-120’ of
cord available
in 5’
increments7
LPI Lamp
included
CSA CSA certified
Mounting
Lens
BM Base
Convex lens clear4
mount
Convex lens amber
YM Yoke
Convex lens blue
mount*
Convex lens green
* Consult
Convex lens red
NOTES:
1 P56500I - default for 120V. P56300ILV - default for 12V.
2 Transformer not included, sold separately.
3 Lamp distribution based on lamp manufacture availability.
www.hydrel.com
for yoke mount
dimensions.
Ordering Information
4
5
6
7
CLC – default.
Mounting accessories with BM only.
RSR6 – default with ALB.
CSL50 – max for 12V.
Example: 4427 P641000I 120 NSP CLC BM ALB RSR10 CSL100
Model
Lamp type
Voltage
Distribution2
Lens
Mounting
Mounting accessories4
Cord set length
Lamp
Options
4427
P64500I
P641000I 1
120
MFL Medium
flood
NSP Narrow spot
WFL Wide flood
CLC Convex lens
clear3
CLA Convex lens
amber
CLB Convex lens blue
CLG Convex lens
green
CLR Convex lens red
BM Base
mount
YM Yoke
mount*
ALB Adjustable locking
base
RSR 4”-24” riser stem
available in 2”
increments5
CSL ___ 10’-120’ of
cord
available in
5’
increments
LPI Lamp
included
CSA CSA
Certified
NOTES:
1 P641000I – default.
2 Lamp distribution based on lamp manufacture availability.
3 CLC – default.
4 Mounting accessories with BM only.
5 RSR6 – default with ALB.
* Consult
www.hydrel.com
for yoke mount
dimensions.
Ordering Information
Example: 4800 100Q 120 FL CLC BM CSL90 LP
Lamp type1
Voltage
Distribution3
4800
Incandescent
100Q
150Q
Low voltage
M75
122
120
FL Flood
Lens
CLF
CLC
CLA
CLB
CLG
CLR
Mounting
Convex lens frosted
Convex lens clear4
Convex lens amber
Convex lens blue5
Convex lens green5
Convex lens red
Cord set length
Lamp
CSL ___ 35’-120’ of
cord available
in 5’
increments6
LP Lamp
installed
* Consult
www.hydrel.com for
yoke mount dimensions.
4424 BM
NOTES:
1 Other wattages available by request.
2 Transformer sold separately.
3 Distribution included on 12V only.
4 CLC – default.
5 CLB and CLG not available with 150Q.
6 CSL50 max. cord length for 12V.
4427 BM
4800 BM
11
(279)
8
(203) 10
(254)
11-3/4
(298)
7-1/4
(184)
12
(305)
4-1/2
(114)
10
(254)
1-1/8 (29)
PSG9
BM Base
mount
YM Yoke
mount*
6-3/4
(171)
10-3/4
(273)
12
(305)
www.hydrel.com
3/4
(19)
8
(203)
1/2
(13)
4-1/4
(108)
8
(203)
Options
CSA CSA Certified
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
Model
* Consult www.hydrel.com
for yoke mount dimensions.
UNDER
WATER
UNDERW
Intended Use
647
Fountain Lighting
UNDER
WATER
UNDERW
Fountain
4415 NM
4424 NM
4800 NM
Intended Use
Lighting for fountains and reflecting pools – niche mount.
Ordering Information
Model
Example: 4415 3/M50 12 FL NM 34B RG CSL50 LPI
Lamp type
4415
Voltage
Incandescent
116I
200QT3
300QT3
Low voltage1
3/M50
3/M75
Distribution
2
12
120
FL Flood
3
Conduit entries
NM Niche mount
34S 3/4” NPT side
Louver
Rock guard
CSL ___
Lamp
35’-120’ of
cord
available in
5’
increments5
LPI Lamp
included
Example: 4424 P56500I 120 MFL CLC NM 34B CSL120 LPI
Model
Lamp type
Voltage
Distribution
Lens
Mounting
Conduit entries
Accessories
Cord set length
Lamp
Options
4424
Incandescent
P56300I
P56500I
Low voltage1
P56240ILV
P56300ILV2
123
120
MFL Medium
flood
NSP Narrow
spot
WFL Wide
flood
CLC Convex lens
clear4
CLA Convex lens
amber
CLB Convex lens
blue
CLG Convex lens
green
CLR Convex lens
red
NM Niche
mount
34B 3/4” NPT
bottom
RG Rock
guard5
CSL ___ 35’-120’ of
cord
available in
5’
increments6
LPI Lamp
included
CSA CSA
Certified
NOTES:
1 Available in 12V only.
2 P56300ILV (12V) and P56500I (120V) default.
3 Transformer not included.
4 CLC– default.
5 RG required for floor-mounted fixtures.
6 CSL50 max. cord length for 12V.
Ordering Information
Example: 4800 RD SS 100Q 120 FL CLC NM 3445B CSL75 LP
Model
Door1
Material
Lamp type
4800
RD Round
SQ Square
B Bronze
SS Stainless
steel2
Incandescent
100Q
150Q
Low voltage
M75 3
Distribution5
Mounting
Voltage
Lens
4
12
120
CLF
CLC
CLA
CLB
CLG
CLR
11"
(279)
Convex lens frosted
Convex lens clear6
Convex lens amber
Convex lens blue7
Convex lens green7
Convex lens red
8
CSL ___ 35’-120’
RG Rock guard
of cord
available
Conduit entries
in 5’
incre3445B 3/4” at 45°
ments9
4800 NM
SQ
2-7/8"
(73)
1-1/4"
(32)
6-7/8"
(175)
13
(330)
6-7/8
(175)
10-7/8
(276)
RG Rock Guard
www.hydrel.com
RD
5/8
(16)
7-11/16
(195)
Lamp
LP Lamp
included
Options
CSA CSA
Certified
NOTES:
1 RD door adjustable, SQ door fixed.
2 SS material not available with rock
guard.
3 Other voltages available by request.
4-3/4 6-1/4
(121) (159) 4 Transformer sold separately.
5 Distribution included on 12V
only.
6 CLC – default.
7 CLB and CLG not available with
150Q.
5-1/2"
8 RG required for floor-mounted
(140)
fixtures.
9 CSL50 max. cord length for 12V.
5-1/2
(140)
4424 NM
5-3/8"
(137)
LLV Louver
Cord set length
Accessories
NM Niche
mount
FL Flood
4415 NM
HYDREL
LLV
RG
Cord set length
NOTES:
1 Available in 12V only.
2 Transformer sold separately.
3 Other distributions available on 3/M50 and 3/M75 only.
4 Either LLV or RG required for floor-mounted fixtures.
5 CSL50 max. cord length for 12V fixtures.
Ordering Information
648
Accessories4
Mounting
PSG9
Fountain and Swimming Pool
ELWC
Electronic Water Level and
Cut-Off Controls
Model #
ELWC
ELWC1
Control box
Underwater
Accessories
UNDER
WATER
UNDERW
Complementing their underwater lights, is Hydrel's full line of accessories is manufactured to the high
standards required for underwater fountain and pool products.
6-7/8
(172)
6
(152)
6-3/4
(171)
Deck and remote
mount
Conduit mount
3"
(76) min.
4
(102)
13 "
(330) max.
ELWC1
9-1/2
(241)
6-7/8
(172)
Colored Lenses
Potting Compound
Green, red, amber and blue
available for most fixtures.
PC21 is a re-enterable
potting compound which
pours yellow and cures
transparent so connections
are easily located. It meets
NEC requirements for
potting underwater
junction boxes.
Model #
PC21
PC2112
35 CU. IN.
20 CU. IN.
Low Voltage Transformers
NOTE: Special consideration must be given
to the length of cords used with low voltage
underwater fixtures.
T1904
6-1/4
(159)
6-1/4
(159)
Model #
T1903
T1904
11
(292)
PSG9
T1905
300-watt
transformer
1000-watt
transformer
500-watt
transformer
www.hydrel.com
T1903 and T1905
5-1/8
(130)
9-1/2
(241)
4-1/2
(114)
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
Low voltage lighting fixtures
require that the line voltages
be stepped down. This is
normally accomplished with
a transformer or a series of
transformers located in the
pool equipment area. Hydrel
offers such parts in sizes
from 300 to 1000 watts.
649
Fountain Lights
UNDER
WATER
UNDERW
Fountain and Swimming Pool
Underwater Accessories
Underwater Junction Boxes
Hydrel underwater junction boxes are
designed for the connection of supply
cords from underwater fountain
fixtures and service conduits. They
feature heavy cast bronze
construction, neoprene gaskets,
internal ground lugs and stainless
steel hardware.
All hubs may be tapped either 1/2"
JB1701
A
NPT or 3/4" NPT with other drillings
available upon request. When
ordering, specify the catalog number,
hub location and hub size.
JB1703
Letters around perimeter indicate
side drill locations. Letters within box
indicate bottom drill locations.
JB1705
C
D
JB1706
A
C
cover G
bottom center H
R
A
B
P
G
B
A
S
K
H
D
E
J
L
F
B
D
C
B
Outside dimensions:
43/4” (121) dia. x 3” (76) deep
Outside dimensions:
33/8” (86) x 43/8” (111) x 21/2” (64) deep
Outside dimensions:
43/4” (121) sq. x 21/2” (64) deep
Outside dimensions:
53/8” (137) sq. x 21/2” (64) deep
Inside dimensions:
31/2” (89) dia. x 2” (51) deep
(25 cubic inches)
Inside dimensions:
3” (76) x 2” (51) x 2” (51) deep
(12 cubic inches)
Inside dimensions:
3” (76) sq. x 2” (51) deep
(18 cubic inches)
Inside dimensions:
4” (102) sq. x 2” (51) deep
(32 cubic inches)
Cover may have single 1/2” or 3/4” hub.
Bottom may also have single 1” hub.
JB 1708
JB1710
C
E
L
C
A
K
J
HYDREL
G
650
F
JB1711
JB1713
pool floor
F
A
B
E
Ground screws
D
D
H
J
J
H
B
L
K G L
E
M
K
R
S
T
P
N
F
M
G
A
internal
cord seal
included
B
to fixture
H
Outside dimensions:
73/8” (188) x 53/8” (137) x 21/2” (64) deep
Outside dimensions:
75/8” (194) x 61/2” (165) x 47/16” (113) deep
Outside dimensions:
75/8” (194) sq. x 43/4” (121) deep
Outside dimensions:
41/2” (115) dia. x 35/8” (93) deep
Inside dimensions:
6” (153) x 4” (102) x 2” (51) deep
(48 cubic inches)
Inside dimensions:
53/16” (132) x 41/8” (105) x 311/16” (94) deep
(62 cubic inches)
Inside dimensions:
6” (153) sq. x 4” (102) deep
(144 cubic inches)
Inside dimensions:
23/4” (71) dia. x 21/4” (58) deep
(10 cubic inches)
Bottom may have single 1" or 11/4" hub.
Bottom may have maximum three 1" hubs or
two 11/4" hubs or one 2" hub.
www.hydrel.com
PSG9
Fountain and Swimming Pool
Deck Mounted Junction Box
Cord Seals
Specifically designed for deck or remote wall mountings, this deck junction box
meets all the requirements of the NEC. It features cast bronze construction,
neoprene gaskets, one hub at each end and two hubs on one side. The entire
bottom and one side of the box are suitable for drilling. Fasteners are stainless
steel.
Constructed of brass with neoprene grommets, these seals are for use in
underwater junction boxes for fixture cord entrance seals.
NOTE: Specify USR strain reliefs for the total number of fixtures. USR sold separately.
D
C
A
H
J
B
K G L
E M
JB1719
g ro und
sc rews
This fountain lighting economy base allows for variable fixture height and
includes Hydrel's pro-focus aim-set feature. Multiple riser heights available.
B
125/8 (321)
11 (279)
12 (305)
12 (305)
12 (305)
B
1 1 /2
1 1 /2
1 3 /4
1 3 /4
1 3 /4
1 3 /4
A
B
C
8 5/8 (219)
7 (178)
8 (203)
8 (203)
8 (203)
C(NPT)
1
/2
3
/4
3
/4
CORD
16-3*
18-3
10-3
A
/8
1
1 /4
1 1 /4
7
B
1 3 /8
1 1 /2
1 1 /2
A
NOTES:
* 18-2/16-1 cord fits SR50 and CS143022parts.
B
C
USR Strain Relief
Universal strain relief (USR). Strain reliefs, used where J-boxes are mounted
flush to floor or deck. Specify for the total number of fixtures to be mounted.
LITHONIA FL
UORESCENT
HYDREL
FLUORESCENT
C
Standard
Stem Length
6"(152)
12
(305)
PSG9
A
/8
7
/8
1 1 /4
1 1 /4
1 1 /4
1 1 /4
7
A threaded cord grip that prevents cord movement from pulling on connections.
Used where J-box is mounted above the floor or deck.
A
B
Cord
18-3
16-3* (3 x 1.5)
18-3
14-3 (2 x 4)
12-3
10-3 (2 x 6)
SR Strain Relief
Model
SR50
SR754
SR75
ALB - Adjustable Locking Base
A
101/2 (267)
7 7/8 (200)
7 11/16 (195)
7 11/16 (195)
7 11/16 (195)
NPT
1
/2
1
/2
3
/4
3
/4
3
/4
3
/4
F
Outside dimensions:
75/8” (194) x 61/2” (165) x 47/16” (113) deep
Inside dimensions:
53/16” (132) x 41/8” (105) x 311/16” (94) deep
(62 cubic inches)
Model
ALB15
ALB21
ALB22
ALB24
ALB27
Model
CS14302
CS143022
CS14304
CS14303
CS143032
CS143033
UNDER
WATER
UNDERW
Underwater Accessories
www.hydrel.com
651

Similar documents

m9710/m9730 - Acuity Brands

m9710/m9730 - Acuity Brands two stainless steel captive, tamper-resistant fasteners. POWER MODULE: Ballast is encapsulated in a custom designed heatdissipating epoxy resin that also eliminates all moisture intrusion to the ba...

More information