Exhaust - V-Twin Manufacturing

Transcription

BIG TWIN
30-0318 Installed
with footboards.
Exhaust
Maxx-shot ST Exhaust Set features 1 3/4” headers with full coverage 21/4” form fit chrome heatshields. Fits 1986-06 FXST and
FLST with or without footboards.
Includes mounting bracket and
removable baffles..
VT No. 30-0318
Radii Exhaust Sets feature the “Quad Finishing” which
includes triple dura nickel and chrome as the final finish. After
chrome plating, pipes are nor malized and dried @572° F for
the final finish process.
Chrome Radii Pipe Set features full curve with 2” OD for ST
models in Rigid or Softail fr ame. Bracket included.
VT No. Year
30-0295 1984-06
30-0381 2007-up
Full Coverage Formed Heat Shields
Included!
30-0318 shown with full
coverage heatshields.
ST Short Stuff Pipe Set features 1 3/4” headers with full coverage 2 1/4” heat shield set. 1986-06.
VT No. 30-0517
30-0517
includes full
coverage
heatshields
and chrome
end caps
Includes full coverage heatshields and chrome
end caps
2” Drags
Six-Gun Pipe
End Set. Wyatt’s
End Tips fit pipes
with 21/4” full coverage heat shields
over 13/4” pipes.
VT No. 30-0576
Caution: These exhaust products are not legal for
sale or use in California on pollution controlled vehicles. These products are intended for the experienced rider only.
213
Note: Radii Exhaust
Set feature “Quad
Finishing” which
includes triple dura
nickel and chrome as
the final finish. After
chrome plating, pipes
are normalized and
dried @572°F for the
final finish process.
30-0295 Installed
2” Exhaust
Pirate 2” Curve Pipe Set. Fits 1986-06 ST/EV + TC-88.
VT No. 30-0320
30-3252
2” Drag Pipes are 40” long.
VT No. Mt. Bkt
Fits
30-3252 Stock
1984-99 FXST-FLST
30-3370 Included 2000-06 FXST-FLST
30-3142 Stock
1984-94 FXR
30-3269 31-9961* 1991-05 Dyna
*Note: Mount bracket required for 1991-94 models only 1995up bolts to stock mount.
30-3370
30-3269
Caution: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only.
214
Radii Pipe Set. Fits LSD and RSD. Feature 21/4” diameter construction for 1984-06.
VT No.
Type
Bracket
30-0543
Stack
31-0899
30-0544
Down
31-0894
Before Starting Engine wipe all finger prints off exhaust pipes after installation.
Oil from hands will leave permanent
marks on chrome finish.
30-0544 Installed
Pipe Bracket mounts to cam cover on EV
and TC-88 models for 30-0544. Hardware
not included.
VT No. 31-0894
Model
Hardware
Evo
(2) None
TC-88
(2) 1/4 2 20 x 2 1/2
(2) 37-0404 3/4
31-0894
30-0367
30-0543
Chrome Exhaust Cone End fits 21/4”
straight pipes with straight cut ends
ends. Cones can be rotated to
desired position, then drill holes for
installation.
VT No. 30-0367
Double D Exhaust Pipes features true “Double Wall” construction which is accomplished by covering the 1 3/4” diameter pipe with a full length, 2 3/4” diameter outer pipe which acts a “heat
shield” which is effectively insulated from the inner pipe . Double D’s are fully welded and will function with virtually no discoloration or bluing. Pipes are fitted with baffles.
Double D Kickers.
VT No.
Fits
30-2000
2000-06 FLST
30-2023
30-2002
1986-99 FLST/FXST
30-2003
1999-05 FXD
1986-99 FLST
Double D Slip-on Mufflers bolt to stock head pipes and feature doublewall performance, 1 1/2” baffles and have the same diameter as
stock. Sold in head pipe for smooth look.
VT No.
Fits
30-2023
1986-99 FXST
30-2024
1986-99 FLST
30-2025
1999-05 FXD
Double D Straights feature parallel slash cut ends.
VT No.
Fits
30-2008
2000-06 FXST
30-2008 2000
30-2010
1999-05 FXD
FXST
Double D S-Bends feature S-bend rear pipe and par allel slash cut
ends.
VT No.
Fits
30-2017
1999-05 FXD
30-2015
2000-06 FXST
DRAG SLIP-ONS
KICKERS
30-2000
2000 FLST Softail
STRAIGHTS
sale or use in California on pollution controlled
vehicles. These products are intended for the
experienced rider only for non-highway only.
215
BIG TWIN
Exhaust
Exhaust
2” Side Sweeper Exhaust Pipes fit 1986-up
FXST models without footboards. Pipes have
oxygen sensor ports with plugs which can be
removed for 2007-up models to install sensors.
VT No. Item
Year
Speed
30-0792 Pipes 1986-up 5/6
30-0792
Upsweep Exhaust
Radii Exhaust Sets feature the “Quad Finishing” which
includes triple dura nickel and chrome as the final finish. After
chrome plating, pipes are nor malized and dried @572° F for
the final finish process.
29-0500
Installed
29-0086 with Megaphone
29-0089 Installed
Bracket
Set
29-1131
Chrome Up Sweep 13/4” Header
Sets will accept straight fishtail
extensions or mufflers which must
be purchased and mounted separately for Softail or Rigid Frames.
VT No.
29-0086
29-0089
30-0589
Model
Evo
Evo
TC-88
Year
1984-94
1995-99
2000-06
FXST Fish Tails are chromed with upsweep in 1 3/4” diameter
for 1984-up 1340 EV and TC-88 models. Baffles not included.
VT No. Year
29-1131 1986-99
29-0500 2000-06
Shot Gun Exhaust
Shot Gun Exhaust Systems fit Rigid or FXST-FLST frames
only. Available as a drag pipe with slash cut ends or with
tapered muffler. All pipes have 13/4” O.D. and are 40” long.
Tapered
Drag
Fits
29-0167** 30-3267
1984-99 FXST-FLST
––
30-3348
2000-06 FXST-FLST
––
29-1130** 1984-94 FXST, 2”
––
30-3268** 1995-06 FXST, 2”
**Note: Evo set mount to existing brackets on FXST frame.
Caution: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are
intended for non-highway only.
216
30-0550
31-0016
30-0551 Installed
Radii Monster Drag Pipes feature 21/4” O.D. and
mount to stock brackets. Fits 1986-06 ST models.
Order baffles separately. Black end cap fits
straight cut end pipes, by drilling 1/4” mount hole.
VT No.
Fits
30-0550 Down Slash Stretchers
30-0551* Straight Cut
30-0552 Down Slash
30-0553 Straight Cut
30-0556 Side Cut
30-0559 Turn Out
30-3359 Heat shield
30-0452
30-0452 Black End Cap
31-0016 Bracket
*Note: Does not include mounting hardware.
30-0551
30-0552
30-0552 Installed
30-0553
30-0556 Installed
30-3359
30-0553
Installed
Caution: These exhaust products are not legal for sale or use in California on
pollution controlled vehicles. These products are intended for the experienced
rider.
217
BIG TWIN
Monster Drag Pipes
2:1 Turnout for FXST
2:1 Turnout Exhaust features 13/4” head pipes with a 3” turnout collector and a steel baffle. Includes mounting bracket.
VT No.
Years
Model
29-0162* 1985-06 FXST
*Note: With heat shields.
Caution: These exhaust products are not legal for sale or use in
California on pollution controlled vehicles. These products are
VT No. 29-0162
1985-94 FXR Exhaust
Chrome 2 into 1.
Single type fits 198494 FXR-FXRS and
uses heatshield set
30-0333.
VT No. 29-1145
30-3395
1982-94 FXR, 1991up FXD Pipe
Clamp Set. 3 pc
Chrome.
VT No. 31-0556
30-3396
31-0189
31-0188
Chrome Exhaust Pipes fit Evolution engine FXR-FXRSFXLR, except Dyna. Feature a true one piece construction, 1
3/4” head pipes, 2 1/2 diameter m ufflers. Designed to be used
with stock flange rings, gasket, clamps, hardware and mounts
to stock bracket with concealed mounts.
VT No. Style
29-0109 Tapered Muffler
29-0110 Turn Out Muffler
29-0111 “SS” Muffler
30-3116 1 3/4” Drags
30-3395 2 1/4” Drags
30-3396 2 1/4” Drags
30-3144* 1 3/4” Goose Drags
30-3142 2” Drags
*Note: Use 31-2101 Mount Clamp
31-0199
VT No.
31-2116
31-0223
31-0199
FXR Exhaust Pipe Brackets,
zinc plated.
VT No.
OEM
Type
31-0189 65670-82 Front
31-0188 65671-82 Rear
T-Bolt Set replacement for all of
our muffler pipes which have
channel type mounting. Supplied
with nut.
U/M
Pair
10 pack
FXR T-Bolt Set, 4 pc
FXR Exhaust Bracket Mounting Block fits
1982-86 All FXR models replaces 65780-82,
each.
VT No. 28-0229
Frame Covers for FXR
Chrome Left Side 42-0100
Frame Cover for
all 5-Speed FXR
1984-94. Fits
directly under the
standard left side frame cover. Supplied
complete with chromed button head allen
42-0663
hardware, and an allen key wrench.
VT No. 42-0008
218
Chrome Steel
FXR& FXRS Side
Cover Set fits 198494 FXR-FXRS.198284.
VT No.
Type
42-0100 Smooth Chrome Neck Cover Set for 1981-91
42-0663 Louvered FXR is easy to install. Covers weld on
neck area.
VT No. 42-0042
30-3015 Installed on 1984-99 FXST
BIG TWIN
Big Twin
Drag Pipe
30-3004
30-3003
30-3032
30-3015
30-3015
30-3015
13/4” Drag Pipes BT
Radii Drag Pipe Sets with formed heatshields (as noted) are 1
3/4” slash cut style 38” length. Pipes mount by stock brackets.
VT No.
Year
Model
Shields
30-3032
1986-06
FXST
No
30-3003
1984-99
FXST
Yes
30-3015
1984-06
FXST
No
30-3004
1984-99
FXST Shotgun No
Note: All 2007 models have oxygen sensors installed in both
front and rear exhaust.
31-1068 Offset Brackets.
VT No. Fits
31-1067 1984-99
31-1068 2000-up
13/4” Drag Pipes by Cycle Shack are 40” long.
Pipes
Bracket
Type
FXST-FXST
30-3253
30-3341
30-3369
30-3373
Stock
Included
Included
Included
1984-99
2000-03
2004-06
2007-up
Stock
Stock
1990-06, 1990-94 use OE bracket
2007-up
FLSTF
30-3368*
30-3374
FXCW
VT No 30-3253
Caution: These exhaust products are not legal for sale
or use in California on pollution controlled vehicles.
These products are intended for non-highway only.
30-3379
Stock
2008-up
*Note: Order 31-9960 mounting bracket for 1995-up replacement applications.
Drag Pipes Competition or Drag Pipes are not approved for highway use in any state.
They are meant for show or race competition. Stock: Indicates no additional brackets
required. Brackets must be ordered separately when required.
219
1984-06 ST
30-0053
C
30-0054
D
30-0055
E
F
30-0056
30-0063
30-0060
M
30-0057
G
30-0058
H
30-0059
I
Samson Extreme Series Exhaust Pipes Sets for 1984-06 Softail
models. Feature 2 1/4” diameter and includes mounting hardware
when required.
VT No. #
Style
30-0053 C
Dagger
30-0054 D
Slash
30-0055 E
Slasher
30-0056 F
Back Slash
30-0050
Baffle and Ring for Above
Performance Rings fit into 2.25” drag
pipes to create back pressure.
VT No. 30-0050
30-0061
J
K
Samson Series Exhaust Pipe Sets for 1984-06 Softail
model. Feature 220° heat shields, 1 3/4” head pipes, 2 1/4”
diameter body and includes mount hardw are when required.
VT No. #
Style
30-0057 G
Sinners Piranha
30-0058 H
Sinners Slash
30-0059 I
Hell Bound Piranha
30-0060 J
Hell Bound Slash
30-0061 K
Hell Raiser Piranha
30-0062 L
Hell Raiser Dagger
30-0063 M
Hell Raiser Shark Bite
Big Guns II FXST-FLST 1986-06
Samson Big Guns II feature 13/4” head pipes with 23/4” FULL COVERAGE HEATSHIELDS. All Big Guns II
come complete with mounting bracket & hardware. Order 30-0113 Performance Baffle ring separate.
VT No. 30-0026 S-502 Short Shots
Note: 2 3/4” Full Cover Shields Over 1
3/4” Head Pipes.
Samson “Caliber” Performance Header Sets. Each set features a 4-stepped
header pipe and correct pipe diameter to produce the v ery best power curves and
all out performance. Every system has been extensively tested to increase torque
and horsepower. Chrome and engraved end caps included. Fits 1986-06 FXST.
VT No. 30-0401
Caution: These exhaust products are not legal for sale or use in California on
pollution controlled vehicles. These products are intended for non-highway
only.
220
BIG TWIN
Exhaust for
85-86 FXE-FXWG,
84-up FXST-FLST
29-0165
30-0549
30-3253
30-0592
30-3369
30-0558
29-0164
29-0166 shown on 1985 FXE
31-3980
FXST-FLST Pipes. Muffler pipe
sets for all 1984-up FLST-FXST
and all 1985-86 FXE 4-Speed.
30-0097
Features include 1 3/4” head
pipes, 2 1/2 diameter m ufflers
with true one piece construction. Uses stock flange rings, gaskets, hardware and mounts to the
factory bracket.
2007-up 2000-06 1995-99 1984-94 Muffler
—
29-1195 29-0164 29-0164 Tapered
—
29-1196 29-0165 29-0138 Turn-Out
—
29-1197 29-0166 29-0166 Super Slash
30-3373 30-3369 30-3253 30-3253 1 3/4” Drag Pipes
—
—
30-3266 30-3266 1 3/4” Goose Drags
—
30-0097 30-0097 30-0097 Heat shield Set
Muffler Pipe Set fits 1986-99 FXST-FLST.
VT No. Type
30-0549 Tapered
30-0592 SS
30-0558 Dumper
31-3980 Bracket
30-0078
30-0079
Chrome FLSTN/I Drag Pipe Sets for 2005-06 FLSTN/I Softail
Deluxe models available in 40” length. Front pipe mounting
bracket is included and rear pipe mounts to f actory bracket. 1
3/4” type uses stock heatshields the 2” type includes rear heatshield and uses stock front heatshield.
VT No. Type
30-0078 1 3/4”
30-0079 2”
221
Goose Exhaust
Drag Pipe
30-3144
30-3266
Pipes for FLSTF
30-3146
30-3266
29-0189
Goose Style Drags. Retro chopper styling in 1 3/4” diameter
and slash cut ends. Use with existing brackets.
VT No.
Year
Model
Length
30-3144 1984-92 FXR
34”
30-3146 1991-05 FXD
40”
30-3266 1984-06 FXST -FLST
40”
29-0191
30-0078
29-1146
Pipes For FLSTF-FXSTD in 1 3/4” header pipe size for 1990up. Note: 31-9960 bracket is required to mount VT No.29-1146,
29-1147 and 30-3246 on 1995-up FLSTF & FLSTN models .
2007-up 2000-06 1990-99 Style
—
29-1193 29-1146 SS
—
29-1194
—
Tapered
30-3374 30-3368 30-3368 1 3/4” Drag Pipe
—
—
31-9960 Bracket for 1995-up
Fitment Replacement
—
—
30-0115 Front Heat shield
—
—
30-0116 Rear Heat shield
222
30-0079
Chrome FLSTN/I Deluxe Pipe Set to fit 2005-06 models.
Features 1 3/4” head pipes 2 1/2” diameter mufflers and one
piece construction. Uses stock flange rings, gaskets heat
shields and mounts to stock bracket.
VT No.
Muffler
29-0189
Taper
29-0191
Turnout
30-0078
1 3/4” Drag Pipe
30-0079
2” Drag Pipe
Note: Modification to original equipment exhaust systems may not be permitted under
local or Federal noise limitation and/or emission laws. Check your local regulation
before ordering. The high performance exhaust components offered in our catalog are
legal for off road use only on 1979 and later models.
Chrome Front Exhaust Bracket for FLSTF
use this bracket with OEM or after market
exhaust system that retain the use of front
exhaust bracket.
VT No. 31-0724
Chrome Guard
Blue Shield Exhaust
is heat resistant
Coating by Kreem, 1
coating for
pint.
exhaust pipes.
VT No. 41-0163
Sold each.
VT No. 41-0161
BIG TWIN
2 1/4” Exhaust Pipe Set
30-0541
30-0542
X Series Pipe Sets in 2 1/4” diameter fit right or left side dr ive
applications.
VT No.
Style
Brackets
30-0541 X
—
30-0542 Venom
31-0987
1986-03 2 1/4” Upswept Pipes Set fits Ev & TC-88 models.
VT No. 30-0325
Bronx Bomber Pipe Set features down and out style with
2 1/4” OD at end por tion fit Ev & TC-88 left side drive only for
1984-06
VT No. 30-0374
Before Starting Engine wipe all finger prints off
exhaust pipes after installation. Oil from hands
will leave permanent marks on chrome finish.
Vance & Hines Big Radius Chrome Exhaust for right side
drive. Features 2 1/2” full header and muffler heatshield system.
Scalloped ends and removable baffles.
VT No. 30-0397
223
Tru Dual
Exhaust Header
for ST models
29-0501
29-1190
29-1169 Installed
Shift Rod
Installed
-
29-1169 Crossover Set (left) with shift rod shown 21-0786
True Dual Chrome Exhaust Systems feature a single pipe for
each side. Each pipe is independent, rear pipe f or the left and
front pipe for the right without intersection. 13/4” O.D. Order heat
shield set separately. Uses 13/4” Slip On Mufflers.
VT No.
Fits
Shield Set
29-1168 1986-94 FXST-FLST
30-0298
29-1169 1995-99 FXST-FLST
30-0298
21-0786 1986-99
Shift Rod
29-1190 2000-06 FXST-FLST
30-0370*
31-0815 Bracket
Ea
21-0786 Shift Rod
1986-99
*Note: Rear pipe heatshield set only use f actory heat shield on
front pipe.
FLST-FXST Fishtail Dual Exhaust Kit by Paughco fits all
1995-up models. Available with Fishtail ends only with or without mufflers. Complete with clamps and mounting hardw are.
Includes shift rod where required. 13/4” O.D. use with 30-0293
heat shield set.
VT No. Type
Year
29-1143 With Straight thru Fishtails,shown
1995-99
29-1144 With Fishtails Mufflers
1995-99
29-1154 Pipe Set Only
1987-99
29-0501 Pipe Set Only
2000-06
30-0293 Heatshield Set
1987-99
Samson Dual
Chrome
Exhaust
Crossover
Systems
include mounting brackets,
heat shields
and clamps.
Mufflers sold
separately.
Each pipe is
independent rear for left, and front pipe for right with out intersection for ”True Dual” style.
VT No.
Fits
29-1179 2000-06 FXST-FLST
2 into 1 Exhaust
30-0132
29-0159
Chrome 2 into 1. Single
type for 1984-99 FLST
when an early FL look is
desired.
VT No.
Shield Set
29-0159* 30-0334
30-0131
Heatshields by Paughco
Front
Rear
Fits
30-0131
—
30-3158
30-0131
—
30-3210
30-0131
—
29-0088
—
30-0132
30-3163
—
30-0132
30-3164
—
30-0132
30-3155
224
2:2 Crossback Exhaust
30-1549
BIG TWIN
30-1546
Rinehart Racing Chrome Crossback 2 into 2 Exhaust
System. The Crossover three step header design with 2 1/2”
chrome integrated mufflers significantly boosts torque and
horsepower across the RPM r ange. Crossback systems are
available in flush cut or staggered v ersions and include 2 1/2”
220° full coverage heatshields that merge flush to the m uffler
bodies, custom billet end caps and tw o sets of baffles (2” OD
for engines up to 96 CI and 2 1/4” OD for large high performance engines). All systems include two oxygen sensor ports.
Staggered Style
Flash Cut Style
30-1549
1986-up FXST
VT No.
Fits
30-1550
2006-up Dyna
30-1546
1986-up FXST
30-1551
1999-05 Dyna
30-1547
2006-up Dyna
30-1548
1999-05 Dyna
30-1546
Installed
Billet Exhaust End
30-0791
Baffle and End
Caps available
separately.
30-0791 Installed
30-0452
Installed
Chrome Billet Aluminum
Custom End Caps fit all 2.25”
pipes.
VT No. 30-0354
30-0789
Chrome
Ends.
VT No.
30-0791
30-0790
Billet Exhaust
Fits
1 3/4”
2 1/4”
Chrome or Black
Anodized Billet
Ends fit 2.25
straight pipes.
VT No. Finish
30-0452 Black
30-0453 Chrome
30-0788
Six Gun Pipe Ends.
VT No.
Fits
30-0789
2 1/4”
30-0788
1 3/4”
30-0453
Chrome Billet Scalloped Pipe
Ends fit 2 1/4” straight pipes. Pair.
VT No. 30-0313
30-0453 Installed
Caution: These exhaust products are not legal for sale or use in California
on pollution controlled vehicles. These products are intended for nonhighway only.
225
Exhaust for
Dyna Models
29-0169
VT No. 29-0170 Shown on
1999 TC88
VT No. 29-1152
30-3146
29-0170
VT No. 29-0171
30-3254
Installed
Dyna Glide Pipe Sets fit 1990-05 models 1 3/4” O.D. Head
Pipes and true one-piece construction. Designed to be used
with stock flange rings and mounts to stock bracket.
1995-05 1990-94
VT No. VT No. Type
29-0169* 29-1153 Tapered
29-0170* 29-1150 Turnout
29-0171* 29-1151 “SS”
—
29-1152 Mini-Tail
30-3254* 30-3254 Drag Pipe
30-3146 30-3146 Goose Pair
*Note: Use 31-9960 to fit 1990-94 models
30-3254
31-0567
Installed
1995-05 Chrome Stock Exhaust Brackets include hardware.
VT No. 31-0567
30-0273
2” Drag Pipes are 40” long by Cycle Shack.
VT No. Mt. Bkt
Fits
30-3269 31-9961* 1991-05 Dyna
*Note: Mount bracket required for 1991-94 models only 1995up bolts to stock mount.
Over and Under Drag Pipes Order baffles separately. Fits
1991-05 FXD, classic style.
VT No.
Style
Size
30-0273 Sweeper
2 1/4
226
Sweeper Exhaust fits FXD models including
2006-up models with oxygen sensors. Pipes are
1 3/4” to 2 1/4” at end portion. Bracket included.
Order baffle separately.
VT No.
Item
30-0786 1991-up Pipe Set
30-0423 Ox Sensor Plug
30-0424 Ox Sensor
30-0786 Installed on 2006 FXD
30-0050
30-0423
2 1/4” Drag Pipes fit FXD-FXDWG.Brackets
included. Order baffle rings separately.
VT No. Item
Year
Model
30-0371 Pipes
1995-05 FXD
30-0475 Pipes
1991-05 FXD
30-0050 Baffle Rings
—
30-0371,
30-0475
Radii Exhaust Sets feature the “Quad Finishing” which includes triple dura nickel and chrome as the final finish. After chrome
plating, pipes are nor malized and dried @572° F for the final finish process.
Exhaust Wrap
48-0123
48-0124
48-0127
48-0125
48-0126
High Temperature Exhaust Wrap Kit helps reduce radiated
exhaust heat. Each kit includes 25 feet of 2” wide wrap that will
withstand up to 2000 degrees. Kits are available in black or tan
and include 4 stainless steel tie wr aps. Wrap is available separately.
VT No. Item
48-0123 Black Wrap Kit
48-0124 Tan Wrap Kit
48-0125 14” Stainless Tie Wraps, 4 pk
48-0126 25’ x 2” Black Wrap
48-0127 25’ x 2” Tan Wrap
227
BIG TWIN
Exhaust
for Dyna
Vance & Hines Exhaust
Vance & Hines Big Shot Shorts feature
21/2” full length header and m uffler heat
shields, Billet end caps, removable baffles
and mounting hardware.
VT No. Fits
30-1522 1986-06 ST
30-1523 1991-05 FXD
Vance & Hines Short Shots feature 1
3/4” header pipes with full coverage 220°
heat shields that run all the way back to
the end caps. Includes removable baffles
and mounting hardware. Note: Will not fit
models with kickstart.
VT No.
Fits/End Type
30-1506 1986-06 ST
Straight
30-1529 1986-06 ST
Slash Cut
30-1507 1991-05 Dyna
Straight
30-1541 2007-up ST
Slash Cut
Straight
30-1530 1991-05 Dyna
Slash Cut
30-1508 1987-99 FXR
Straight
30-1542 2006-up Dyna
Slash Cut
30-1518
Vance & Hines Big Shots feature 2 1/2” header pipes, power
chamber design that uses a unique crosso ver design that
increases horsepower and torque, full coverage heat shields,
Billet end caps, removable baffles and mounting hardware.
1986-up ST
30-1538
Staggered
30-1539
Long
1991-05 FXD
30-1505
Staggered
2006-up FXD
30-1535
Staggered
1995-06 FLT
30-1524
Long
228
30-1519
30-1517
30-1518
30-1519
Vance & Hines Long Shots with removable baffles.
VT No.
Style Item/Fits
30-1517 HS
Large 2 1/2” Full Coverage Header and
Muffler, Heatshield Scalloped Slash Ends,
Hot Rod Sound, Virtually Blue Proof
Fits1986-06 ST
30-1518 LS
1 3/4” Head pipe with 2 1/4” Muffler,
220° Full Length Heatshield, Str aight Cut Ends
Fits 1986-06 ST
30-1519 LS
As Above, Fits 1991-05 FXD
Vance & Hines Straight
Shots HS features 2 1/2” full
coverage header and muffler
heat shields. Removable baffles and mounting hardware.
VT No. Fits
30-1509 1986-06 FXST
30-1527 1991-05 Dyna
30-1556
30-1526
30-1527
Big Radius
Exhaust
1991-05 Dyna
Vance & Hines Side Shots features power chamber technology, 21/2” header pipe and muffler heat shield, slash cut Billet
caps that have scalloped cut, and removable baffles and
mounting hardware.
VT No.
Fits
30-1502 1986-06 FXST Models
30-1532 1991-05 Dyna Models
Vance & Hines Straight Shots feature full length/full coverage heat shields, 13/4” header pipes with 2 1/4” bodies, removable baffles and mounting hardware. Available in dual stagger
or high/low styles. Note: Will not fit with kickstart and when
mounting high/low system on FXST, FLST models use 310555 mounting bracket.
Dual Stagger Style
VT No.
Fits
30-1510 1986-06 FXST, FLST
30-1511 1991-05 FXD
High/Low Style
30-1513 2000-06 FXST, FLST
30-1514 1986-99 FXST, FLST
Straight Shot
Vance & Hines Big Radius Exhaust features 21/2” full header
and muffler heat shield system, slash cut end caps , removable baffles and mounting hardware. 2006-up FXD sets
include fittings for oxygen sensors.
VT No.
Fits
30-1526 1991-05 Dyna Models
30-1534 2006-up Dyna Models
30-1540* 1986-09 FXST, FLST Models
30-1556 2007-up FLT
*Note: Use O2 Sensor Bung Plug 30-0423 when O2 sensor is
not desired, for pre 2007 need O2 Sensor Bung Plug
Rinehart Exhaust Systems feature a
three step header pipe that star ts at 1
3/4” at the head increase to 1 7/8” and finish at 2”, permanently mounted 2 1/2” full
length heatshields, removable performance baffle and polished black anodized billet aluminum end
caps.
1986-06
1991-05
Style
FXST models
Dyna models
30-0390
30-0392
Flush Cut
30-0391
30-0393
Staggered
30-0390
229
BIG TWIN
Vance & Hines Exhaust
Drag Exhaust
Pipes for FLT
VT No. 29-1140
30-1520
Vance and Hines Long Shot Pipe Sets for FLT models.
Removable baffles included.
VT No.
Year
30-1520 1999-06
30-1521 1986-98
VT No. 29-1141
VT No. 29-1142
2” Over and Under Drag Pipes by Samson. Order baffles separately.
VT No.
Years Style
Heat Shields
FLT-FLHT-FLHR
30-0278 1999-06
30-0533
Baffles
30-3274 Fits all
VT No. 30-3203
FLT Chrome Drag Pipe Slash Cut includes mount hardware.
VT No.
Year
Brand
30-3157 1985-06
Paughco
30-3203 1985-06
Cycle Shack
30-3375 2007-08
Cycle Shack
230
1987-06 FLT-FLHS-FLHR Chrome Muffler Pipes feature an
all-steel muffler core.
VT No.
Style
29-1140 Tapered
29-1141 “SS”
29-1142 Turndown
Samson Big Guns II feature 1 3/4” head pipes with 2 3/4” full
coverage heat shields and include mounting br acket and hardware for 1995-06 FLT.
VT No.
Fits
30-0027 Pipes
30-0050 Performance Baffle Ring for Above
BIG TWIN
Exhaust for Touring
29-1114
29-1163
29-1166
29-1167
Chrome Dual Pipe Cross Over Systems less Mufflers feature
intersection of left side cross o ver at rear pipe for touring models, 13/4” O.D.
VT No. Heat shield Years
29-1163 30-0307
1985-94
29-1166 30-0307
1995-06
30-0306
29-1156
29-1198
30-0328
30-0426
True Dual Chrome Exhaust Systems by Paughco feature a
single pipe for each side. Each pipe is independent, rear pipe
for the left and front pipe f or the right without intersection. 13/4”
O.D. Order heat shield set separately. Does not include hardware. Uses 13/4” Slip On Mufflers.
VT No.
Years
Shield Set
29-1114 1985-94
30-0328
29-1167 1995-98
30-0328
29-1198 1999-06
30-0328
Chrome 2 into 1. Single type for Touring.
VT No.
Year
Heat Shield
29-1156* 1985-94
30-0306
29-1158
1991-06
30-0426
*Note: Fits Evo Motors
Adapter Set allows 14mm sensors to
be used in earlier pipes with 18mm
threads.
VT No. 32-0057
30-0424
30-0423
Oxygen Sensors sold each for Touring models.
VT No. Year
Fits
Thread
30-0424 2007-09
Front & Rear
18mm
30-0431 2010-up
Rear
14mm
30-0432 2010-up
Front
14mm
30-0423 2007-09
Front & Rear
Plug
231
Cross Over Exhaust for FLT
30-0608
30-0588
Installed
30-0588
Duallie Cross Oval System for Touring, includes headers
heatshields, brackets and slash down muffler set with removable baffles.
VT No. Year
30-0608 1995-06
30-0609 2007-08
30-0621 2009
29-0083
30-0763
29-0082
Chrome Tru-Dual Kit with wide oval muffler. Includes tru-dual
cross over kit with clamps and wide o val muffler set.
VT No.
Year
30-0588 1995-06
30-0763 2007-08
30-0764 2009
30-6727
Vance & Hines FLT Independent Dual Header Chrome
Pipe Set to fit all models. Features include independent
exhaust pipes for both cylinders, full length heat shields and
allows the use of OEM style m ufflers. Order muffler separately
or can be used with an y 1995-up FLT stock muffler set.
VT No.
Years
Item
29-0083 1995-06 Header Set
29-0082 2007-08 Header Set
29-0081 2009
Header Pipe Set
30-6727
Dual Muffler Set
232
Rinehart Chrome True Dual Exhaust System for 1995-06
FLT. Features two oxygen sensor ports in the head pipes, multibend radius three stop head pipes that are 1 3/4” at the head to
1 7/8” mid and then a 2” finish, torque chamber baffles, 2 1/4”
heatshields that flow into 3 1/2” mufflers and black anodized
end caps.
VT No. Years
30-0396 1995-06
30-1543 2007-up
Tru-Dual
Exhaust
Header
BIG TWIN
30-0581
left side
30-0581
Installed
30-0581
right side
Motorcycles modified with some after market
parts, accessories and performance engine parts
may be restricted from use on public roads
and/or limited to closed courses. Please see U.S.
EPA and your respective state regulations.
30-0581 As Kit Supplied
sale or use in California on pollution controlled
vehicles. These products are intended for nonhighway only.
30-0612
Left
30-0581
30-0612
31-1069
Tru Dual Cross Over Header fits FLT, FLHT, FLHR, FLTR.
Includes heat shields and br ackets except 30-0612. Clamps
and hardware are not included except 30-0612 which include
brackets. Order type muffler separately.
VT No. Item
Year
30-0581 Header Pipes
1995-06
2007-08
2009
2010
30-0588 Header & Muffler Kit 1995-06
31-1069 Clamp Set
30-0612
Right
Accepts Stock Heat Shields
233
Exhaust for Touring
29-0195
29-0195 with
30-3377
Bub 7 Chrome True Dual Exhaust System utilizes performance proven stepped header technology. Running from 1 7/8” to
2”. Available with cross-over/balance tube for impressive bottom
end and mid-range performance or without cross-over for mid
range and top end performance. Features 2 1/4” 220 degree full
coverage heat shields and 3 1/2” diameter mufflers with
adjustable slash cut ends. Slash can be fixed in the upward or
downward position.
VT No. Item
Type
30-1554 2007-08 FLT, FLH
With Crossover Tube
30-1555 2007-08 FLT, FLH
Without Crossover Tube
30-1544
Bassani Power Curve Chrome True-Dual Crossover Header
Pipes feature proper port angle and matched length rear headpipe design that produces even performance from each cylinder
system. Accepts any 1995-07 FLT muffler and includes three
custom fit heatshields (re-use two existing heat shields). Order
mufflers separately.
VT No. Fits
30-1544 2007-08 FLT, FLH
30-1545 1986-06 FLT, FLH
Cycle Shack FLT 2” OD Dresser Dual that feature a stepped
header pipe that exit on each side of the bik e and offer
increased flow and performance for large displacement motors.
Eliminates OE rear cylinder Y-Pipe. Fits 2007-08 models. Order
muffler separately.
VT No. Item
29-0195 Header Set
30-3377 “SS” Style Muffler
30-3378 Straight Cut Muffler
Vance and Hines FLT Big Shot Duals features 1 3/4” headpipes with 220° wrap 2 1/2” Heat shields that flow into 2 1/8”
muffler bodies. A true 2 into 2 system that eliminates f actory
crossover. Includes Baffles and mount hardware. Fits 1995-06
FLT Models.
VT No. 30-1531
Chrome Muffler Support Bracket
fits 1986-up Touring.
VT No. 31-1250
Oxygen Sensor Tool will remove and install oxygen
sensors on fuel injected models. Can be used with
7/8” wrench or 3/8” drive.
VT No. Fits
16-1131 18mm
16-1132 14mm
234
BIG TWIN
Fishtail Style Exhaust
Muffler
Straight
30-0243
30-0214 Installed
30-0214
30-3251
30-0213
30-0386
Installed
30-3380
30-0243
30-0250
30-0386
FLT-FLHT Muffler Sets are available in turnout or fishtail
design. 31” Long Mufflers fit the existing clamps and hangers
and are 3” in diameter.
1985-94
VT No. Type
Brand
30-0214 Fishtail
MCM
30-0213 Turnout
Paughco
1995-up
30-3380 Fishtail
Radii
30-0250 Fishtail
Cycle Shack
30-3384 Turnout Radii
1985-up FLT Muffler Gasket replaces 6572192.
VT No. 15-0968
30-3251
30-0386
V-Twin Mfg.TM 30” Fishtail Kits for FLT. Include two fishtails.
Fishtails do not include baffles.
VT No.
Year
Clamp
30-0243 1985-94
—
30-3251 1995-up
31-0280
30-0386 1995-up
—
30-0389 1995-up
—
Muffler Hanger Bracket Set fits L1985-up FLT for
stock application. Replaces 65723-85.
VT No. 31-0598
235
Muffler for Touring
30-0596
Installed
30-0599
Radii Muffler Sets feature
• Removable Baffles
• Welded Top Mounts
• Accurate I.D. Inlets and
formed inlet tubes
Radii Muffler Set features
3.50" outer diameter with
black anodized end caps and
removable baffle insert for
1995-up Touring models.
VT No.
End Caps
30-0596 Black
30-0599 Chrome
Slash Down Muffler by Radii, features removable baffles,
which can be modified for alternate tuning characteristics.
Mufflers bolt to original bracket on 1995-up FLT touring models
and measure 32” long by 3.5” outside diameter.
VT No. Year
30-0597 1995-08
30-0626 2009-up
30-3371 Installed
FLT Extended Front Exhaust Heat Shield covers the
exposed exhaust pipe adjacent to r ider footboard. Mounts with
existing hardware. Fits 1983-up FLT models.
VT No. 30-3371
30-0422
Installed
30-0741 Installed
Muffler Bracket Cover Set fits 4” OD muffler on Touring models.
VT No. 30-0741
Wide Oval Extensions fit FLT models 1995-up to replace
stock mufflers. Oval shape measures 2.5” x 5”.
VT No. 30-0422
236
FLT Muffler Set 1995-up
BIG TWIN
30-0600 Installed
UP
30-0600
30-0598
30-0613 Installed
DOWN
30-0628
30-0628
Installed
OUT
4” Slash Muffler Set includes end cap which can be installed
for side, up or down direction. Baffles are removable type, which
can be modified for tuning preferences.
VT No. 30-0598
Muffler Set for 1995-up Touring. End cap set included. 28.5” long.
VT No. Item
O.D.
30-0600 Muffler Set, Slash End Cap
3.5”
30-0613 Muffler Set, Revolver End Cap
4”
30-0629 Muffler Set, Billet Slash End cap
4”
30-0628 Muffler Set, Shark End Cap
4”
30-0601
30-0845
Peacemaker Sound Adjustable Chrome Mufflers features a
electrically operated diverter valve that lets you control the
sound level while you ride with a convenient electric switch at
the left handlebar grip. 4” diameter muffler with slash cut ends
that can be easily rotated. Includes all hardware.
VT No. 30-1402
30-0605
30-0627
Billet End Caps fit OE style mufflers.
VT No. Type
Fits
O.D.
30-0601 Slash
30-0600 3.5”
30-0605 Slash
30-0598 4”
30-0845 Revolver 30-0598 4”
30-0627 Shark 30-0600 3.5”
30-0798
237
FLT-FLHT Pipe Set
30-0349
30-0349 Installed
23/8” Dumper Straight Pipe
Set fits 1985-up FLT models.
Baffles included. Order end
clamps 31-2132 and bolts 370977 separately.
Fits 1995-up Touring.
30-0352
1985-94
VT No.
30-0352
30-0435
31-2136
1995-up
30-0349
37-0977
30-0351
31-2132
Item
Pipe Set
Pipe Set
End Clamp
Year
1985-94
1985-94
1985-94
Pipe Set
Bolt Set
Baffle Set
End Clamp
1995-up
1995-up
1985-up
1995-up
30-0352
Dumper Pipes include RMB baffle set which are remo vable
with one bolt.
31-2132
37-0977
31-2136
30-0351
“Rolled Thunder” Mufflers
30-3291
VT No. 30-4137 Oval
VT No. 30-4142 Miter
Replacement Mufflers for FLT-FLHTFLHTC-Ultra-FLHR, bracket included,
order end clamps separately. All sets by
Samson feature 3” diameter with welded
channel brackets.
VT No.
Type
1985-94
30-3281 Slash Flair
1995-up
30-3291 Mitre
VT No. 30-4144 Straight
“Rolled ThunderTM” Mufflers by Samson fit 1985-up FLT
31-2103
31-3979
31-2136
models. All styles are 3” diameter, 28” long with a non-removable baffle. Sold in pairs.
VT No.
Years
Description
30-4137 L1985-94
Oval
30-4142 1995-up
Miter Cut
28-0424
15-0696
30-4144 1995-up
Straight Cut
30-4147 2000-up
Oval Slant Cut
FLT Inlet Clamp Set is an updated
FLT Muffler Clamps choose body or inlet clamps for 1980-up
design to replace 65722-85B for 1985when installing custom mufflers, sold in pairs.
94 models.
VT No. OEM
Item
Year
VT No. 31-0450
31-2136 65722-85 Stainless Inlet Clamp
1985-94
31-2103
Chrome Inlet Clamp
1995-up
31-3979
3”
I.D.
Chrome
Body
Clamp
1985-up
31-1560 3 1/4”
Chrome Body Clamp
1985-up
28-0424 65724-85 Black Rubber Set
1985-up
15-0696 65721-92 Copper Gasket, 5 pk
1985-up
238
30-0138
30-0139
V-Twin Mfg.TM
Fishtail Kits
include two (2)
fishtails, two
(2) inlet and
two (2) body
30-3165
clamps. Pipes
are 1¾” inside
diameter the
full length of fit over drag or dual exhaust systems. Fishtails do
not include baffles.
VT No.
Length
30-3165
30”
30-0137
36”
30-0136
31-2105
Mufflers
31-2103
30-0151
Chrome Fishtail Straight Pipes fit over 1¾” pipes and have an
O.D. of 1 7/8”. Sold each except where noted. Order clamps separately.
VT No.
Item
30-0138
18” Fishtail Ext.
30-0945
18” Set
30-0139
30” Fishtail Ext.
30-0948
30” Set
30-0136
36” Fishtail Ext.
30-0518
36” Set
30-0950
36” Set
31-2105
1 7/8” Hanger Clamps
31-2103
1 7/8” End Clamps
Chrome Classic Fishtail Tips slip over
the outlet of the muffler or straight pipe.
Available 13/4” inlet diameter. Tip measures
71/8” long and 5 5/8”high.
VT No.
U/M
30-0197
Each
30-0974
Pair
Batique Pipe End fits over 1 3/4”
exhaust tube. Sold each.
VT No. 30-0793
31-2103
VT No.
30-0151
30-3185
30-0152
31-2103
31-2144
31-2099
Chrome Fishtail Style Mufflers are 2 7/8”
diameter, with steel baffle core. Inlet end fits 1¾” OD
pipes. Order clamps separately.
Type
30”, each
30” Set includes 31-2099 clamp set
36”, each
1 7/8” end clamp
1 7/8” end clamp, heavy
2 7/8” body clamp
30-0264
30-0254
30-0369
Chrome Tapered Fishtail Muffler features 1¾” inlet.
Use 2½” body clamps for mounting which are sold
separately.
VT No.
Item
U/M
30-0255
Muffler 25” Long
Each
30-0263
Muffler 25” Long
Pair
30-0253
Muffler 27” Long
Each
30-0264
Muffler 27” Long
Pair
30-0254
Muffler 31” Long
Each
30-0369
Muffler Set, 31”
Set
31-2106
Body Clamps, 2½” Pair
31-2103
Inlet Clamps, pair
239
BIG TWIN
Fishtail Exhaust Extensions
Fishtail Style for FXSTS
30-0846
30-0049
Installed
See them on the web! www.vtwinmfg.com
30-0049
29” Fishtails for FLSTS Heritage models available in straight or
muffler fishtail.
VT No.
Type
30-0049
Straight
31-0815
30-0846
Straight
30-0604
Muffler Set
30-0798
Muffler Set
31-0815
Bracket (ea)
Cycle Shack Slip On Muffler
TAPERED
SS (SUPER SLASH)
30-3343
TURN-OUT
Replacement Slip On Muffler. Choice of tapered, “SS”, or
Turnout styles, which offer low restriction, and ease of installation to factory support and head pipes. Sold as pair.
Tapered
SS
Turnout
Rocket Fishtail
2000-06 FXST-FLST
30-3342
30-3343
30-3344
2000-06 FLSTF-FXSTD
30-3345
—
30-3347
1995-99 FXST-FLST
30-3265
—
—
1991-up FXDB*
30-3259*
30-3260* 30-3261*
1980-85 FX-FXE-FXS-FXWG
1984-94 FXST-FLST-FLSTF
30-0235
30-0236
30-0237
1995-99 FLSTF, N
30-3262
30-3263
30-3264
240
1982-86 FXR-FXRS-FXLR
30-0241
—
—
1987-up FXR-FXRS-FXLR-FXRT
—
30-0233
30-0234
1997-up FLSTS
30-3320
—
—
30-3319
*Note: 1991-94 models requires 31-9961 mounting br acket
Turnout Slip On Muffler Set for 2000-03 Softail.
VT No. 29-1181
BIG TWIN
Slip On Muffler
for Dyna
30-0861
30-0861
30-2040
RMB Baffles 30 Second Removal!
RMB Slip-on Muffler Sets. RMB Styles include removable baffle set. One bolt for a quick removal. Install with stock header
pipes. Mufflers fit 1995-up FXD-FXDWG models. 30 Second
Baffle removal.
31-0990
VT No.
Years
Slash
30-0861 1995-up
Side
30-2036 2007-up
Side
30-2040 1995-up
Down
31-0990 Clamp Set
30-0861
Venturi Style Baffle is
removable or can be modified for alternate tuning characteristics on 30-0861 AND
30-2040 muffler sets.
30-0623
30-0624
SS Slip On Muffler Set fits 2000-up FXST.
VT No. 30-0897
Optional Torque Tube Set features improved
baffling and back pressure for FX, XL and
FXD Screamin’ Eagle Muffler sets 30-0861
and 30-2040.
VT No. Type
30-0623 Smooth
30-0624 V-Slots
241
Exhaust Taper Valve
30-0329
30-0113
30-0355
Stainless Exhaust Taper Valves fit into exhaust between pipe and head to put bac k the low end torque which is lost when large
diameter or straight pipes are used. Fit Evo models with factory or aftermarket pipes, pair.
VT No.
Type
Material
30-0119
30-0113
Machined
Stainless
30-0355
Extruded
Stainless
30-0329
Extruded
Steel
Stainless Steel Taper Valve Kit includes 2 pure stainless extruded sleeves to fit
between pipe and exhaust port, to aid in back pressure when range OD or drag pipes
are used. Kit includes solid copper machined exhaust seals which will not restr ict gas
flow.
VT No. 30-0119
Heat Shield
30-3170
30-0134
30-0097
Chrome Heat Shield Sets fit 1986-99 FXST, 1 3/4” Drag style
or one piece muffler pipes, no cut out for cross tube, clamps
included.
VT No.
30-0097
30-0337
30-0338
30-3170
Type
Front & Rear
Front
Rear
Front & Rear
Style
Smooth
Smooth
Smooth
Perforated
Stock Chrome Heat Shields.
VT No.
Fits
Model
30-0134 Front
FXST-FXR
30-0785 Front
FXST
30-0133 Rear
FXST-FXR
30-0115
Year
1986-95
1995-99
1986-99
30-0116
30-0096
30-0135
Chrome Equalizer Heat Shields are stock replacement for
models listed. Worm clamps included.
VT No. Year
Model
30-0096 1980-84
FXWG
30-0135 1986-99
FXR-FXST
242
Heat Shields fit Big Twin Evo Shot Gun Pipes, 1 3/4” or 2” sold
each.
VT No.
Type
30-0115 Front
30-0116 Rear
Heat Shields by Paughco
Rear
Fits
Front
—
30-0128
29-1165
—
30-0128
29-1108
—
30-0128
29-1107
30-0129
—
30-0129
29-1106
—
30-0130
29-1100
—
30-0130
29-1101
—
30-0130
29-1102
—
30-0130
29-1164
30-0131
—
30-3158
30-0131
—
30-3210
30-0131
—
29-0088
—
30-0132
30-3163
—
30-0132
30-3164
—
30-0132
30-3155
Heat Shield
B
30-1269
E
D
C
F
30-3244
30-3241
30-0256
Chrome FLT Flame
Embossed Heatshield
Kit includes 3 pieces
for 1999-up models.
VT No. 30-0978
30-1271
30-1272
30-1270
Chrome FLT Heat Shields fit 1983-up models, fit stock heat pipe.
VT No.
# Year
Type
30-3240
A 1983-up Front
30-3241
1983-up Rear
30-0244
B 1981-91 Lower
30-3242
C 1992-up Low, Right
30-3245
D 1992-up Low, Right, Rear
30-3243
E 1985-94 Left, Rear
30-3244
1983-up Left, Top
30-0215
F 1981-88 Front
30-0256
Clamps for Above, 10 pack
30-1269
2009-up Lower Right
30-1270
2009-up Rear Right
30-1271
2009-up Front Right
30-1272
2009-up Rear Left
30-3371
Installed
FLT Extended Front Exhaust Heat shield Covers the
exposed exhaust pipe adjacent to r ider footboard. Mounts with
existing hardware. Fits 1983-up FLT models.
VT No. 30-3371
30-0978
Universal Heat Shield
30-0362
Groove
30-0365
Flame
Chrome Universal Heat Shields with groove or flame.
VT No.
Style
VT No.
Style
30-0364
4” Flame
30-0321
4” Groove
30-0365
6” Flame
30-0362
6” Groove
30-0366
8” Flame
30-0363
8” Groove
30-0118
Installed
30-0121
30-0120
30-3385
30-0124
30-0122
Chrome Universal Heat Shields are available for 13/4” or 21/4”
straight pipes. Includes mounting clamps. Sold individually.
For 13/4” Pipes
For 21/4” Pipes
30-0122
10”
30-0120
4”
30-0123
12”
30-0474
6”
30-0124
18”
30-0121
10”
30-0221
30-0245
Universal Heat Shields include
clamps for installation.
VT No. #
Type
Length
30-0109 A Perforated 9”
30-0106 B Smooth
7”
30-0118 C Flame
8”
30-0117 D Flame
11”
30-3386
30-3385 F
Skull
9”
30-3386
Skull
12”
Chrome Replica ‘Spoon’ Style Heat Shield.
VT No.
Type
30-0221
5 1/2”
30-0245
9”
243
BIG TWIN
A
Baffle
A
2 1/4 Torque Tube Set will fit into ID of str aight pipes, unique
shape will compress exhaust gases for more sound and less
noise with added power 4.5” long. One 1/4” hole is required
for mounting.
VT No. Type
30-0618 Plain
30-0372 V-Slots
30-3180
Blunder Buss Pipe Baffle is full 12” long steel, pair. Note:
Baffle size denotes size of pipe into which it fits .
VT No.
Size
30-3180
1 3/4”
30-3181
2”
Pipe Baffles sold
each. Note: Fits
Cycle Shack SS
pipes, size 2 3/8”.
VT No. 30-0104
30-0623
30-0624
Torque Tube Set. 4 Piece
Set allows variation of air
flow for
2 1/4” pipes.
VT No. 30-0617
30-0619
30-0620
Torque Tube Set features improved baffling and back pressure
for FX, XL and FXD Screamin’ Eagle Muffler sets, 30-0861,
30-2040
HD Type Wyatt Pipes Fits
30-0623 30-0619
Radii (Smooth)
30-0624 30-0620
Screamin’ Eagle (V-Slots)
244
30-0217
30-0372
30-0618
30-0617
B
30-0102
A
30-0103
B
30-0216
Pipe Baffles fit inside straight pipes, sold in pairs. Note: Baffle
size denotes size of pipe into which it fits .
VT No. #
Size
Length
30-0101 A
1 1/2”
4”
30-0102 A
1 3/4”
4”
30-0103 A
2”
4”
30-0216 B
1 3/4”
8”
30-0217 B
2”
8”
Performance Rings fit into 2.25”
drag pipes to create back pressure.
VT No. 30-0050
30-0992
Features
• Easy Installation
• Forward Mount
Ring
• Burn Out Proof
• No Rattles
Power Spiral Baffles feature the latest designs in e xhaust
baffle concepts. The minimum restrictive properties of the
inverted cone allow for more power and yet reduce decibel
number to acceptable levels. Forward mount ring at tip allow
mounting of various size discs to produce required bac k pressure on specific applications. Flexible design allows installation into turn out ends.
Fits:
8”
12”
1 3/4” 30-0993
30-0990
2”
30-0992
30-0991
2 1/4” 30-0988
30-0989
Snuff or Not for 2 1/4” tube
style baffles for added back
pressure. Mount with 1/4” x
20.
VT No. 30-0454
1985-up BT
Exhaust Gasket
Set includes 2 snap
rings.
VT No. 15-0451
12-2125
VT No.
12-2125
12-1187
30-0257
Exhaust Stud Kit
includes 4 studs and
4 stainless flanged
nuts. Fits 1984-96 BT.
Item
Kit
Studs Only
Solid Copper Exhaust
Gaskets fit Evo models.
VT No. 15-0777
Exhaust Port Gasket
Kit includes two stainless steel knitted gaskets, two snap rings
and four heavy duty flange nuts. Fits all
1985-up Twins.
VT No Brand
15-1285 Radii
15-1274 James
Jims Exhaust Gasket Installer
Tool will correctly install exhaust
port gaskets into cylinder heads,
minimizes gasket distortion.
Helps heads flow better.
VT No. 16-2112
15-1274
BIG TWIN
Exhaust
Gasket for
EV & TC-88
Chrome
Exhaust
Finned Flange
Set.
VT No. 30-0857
Exhaust Flange Kit fit Evo 1985-up 1340
Big Twin replacing 65328-83. Kit includes
snap rings & mesh gaskets.
VT No. Item
U/M
30-0205 Kit
Ea
12-0942 Snap Ring
10
15-0227 Gasket
2
15-0451 Gasket & Snap Ring Kit Kit
15-0732 Gasket
10
12-1187 Exhaust Stud, 16715-83 5
30-0257 Chrome Flange Only
2
James Crossover Tube
Gasket fits 1982-up FXR and
1991-up FXD models. Each
VT No.
Type
15-1069
FXR
15-1076
FXD
Evo Exhaust Kit
includes 4 chrome cap
nuts, 4 washers and 2
mesh gaskets. For
1984-99 1340 model
Evolution.
VT No.
Type
37-8900
V-Twin
15-0726
James
15-0732
Exhaust Port Gasket of knitted stainless
steel.
VT No. Type
Qty
15-0227 Tapered
2
15-0267 Mesh Gasket
5
15-0712 Tapered, James
5
15-0732 Tapered
10
15-0344 Mesh, 1999-up
5
15-1236 James, 1999-up
2
Exhaust Port Lock Kits.
Special fasteners & lock tabs
secure pipes for good. Fits
1984-99 Evo
VT No. 37-0251
Exhaust Bracket
Black Mounting
Brackets available to
31-3980
fit Cycle Shack mufflers and drag pipes
FXST-FLST Exhaust Support mounts
31-4047
as well as a universal
stock or custom drag pipes to frame.
31-9961
bracket for other
Stock on FXST models, but used on Fat
pipes.
Boy to mount lower drag pipes. The VT No. 31-4030 can be
used on 1995-up models to mount ear ly style Porkster or Cycle
31-9960
Shack Drag Pipes.
VT No.
Type
Fits
31-3980 Chrome 1984-94 FX-FLST
Black Mounting Brackets available to fit Cycle Shack mufflers
31-4030 Black
1984-94 FX-FLST
31-0815
and drag pipes as well as a universal bracket for other pipes.
31-4046 Chrome 1995-99 FX-FLST
VT No.
Mfg.# Fits
31-4047 Chrome 1995-up FXSTF-N
31-9993 BK-8 For use with front pipes from these
31-0815 Chrome 1997-up FLSTS
FXST shotgun pipes and headers
31-0597 Black
2000-up ST TC88
37-9029 Chrome Bolt Kit
PHD-114-GT, PHD-114GF, PHD-214GT
Chrome P Clamps include bolts. 6” long
PHD-201G, PHD-101G, and PHD-222
strap allows universal type mounting, sold in
31-9961 BK-9 Fits 1991-up Dyna, PHD-129, PHD-149
pairs. I.D.
31-9960 BK-11 Fits 1995-up FLST, PHD-128, PHD-147
31-9993
FXR Exhaust Pipe Brackets zinc plated.
VT No.
OEM
Type
31-0188
31-0189 65670-82
Front
31-0188
65671-82
Rear
31-0189
VT No.
31-3947
31-2100
31-2101
31-2121
Size
1”
1 1/2”
1 3/4”
1 3/4”, Black
VT No.
31-2102
31-2119
31-4007
37-8683
Size
2”
2 1/4”
1 3/4” 10 piece per card
Bolts
245

Exhaust - V-Twin Manufacturing

Transcription

Similar documents

Exhaust - TRB

New Announcements Part 2 PDF

Centra Corporation Centra Corporation

UNIVERSAL TELESCOPIC SEATING SYSTEMS