Products Catalog - Taylor Made Products

Transcription

2011
Marine Accessory
Products Catalog
A
M e m b e r
o f
Visit us at
www.taylormadeproducts.com
Index
Welcome to our new 2011 Taylor Made Products Catalog! For over
a century, Taylor Made has been very proud to offer a wide range of high
quality and innovative products and services to the boating community.
This year, we are continuing that tradition by exclusively introducing
the use of Gore® Tenara® Sewing Thread in all our Hot Shot™ and Ultima ™
fabric Trailerite® Boat Covers and Bimini BoatTops ®.
An industry-first, the Taylor Made and Gore® Tenara ® partnership
will combine to offer the highest quality boat covers and bimini tops on
the market and sets a New Standard in Quality and Performance. Taylor
Made Trailerite ® boat covers, now sewn exclusively with Gore ® Tenara ®
Sewing Thread, are the only true choice for any boater looking to protect
their boat for years to come. We are so confident in the performance of
Taylor Made covers and bimini’s featuring Gore® Tenara® Sewing Thread
that we are offering another industry-first - Seams Guaranteed for a
Lifetime…to Outlast the Fabric, or we’ll Repair it Free!
And now, all Taylor Made covers ship within 24 hours of the
receipt of the order! Our Boat Cover 24 program ensures that you and your
Fenders & Accessories ..................................2-13
Survivor • Super Gard • Hull Gard • Big B
Tuff End Fenders & Buoys • Specialty Fenders
Fender Boots • Fender Hangers
Safety Products ............................................14-16
Life Rings • Life Ring Accessories • Air Horns
Decorative Ring Buoys & Accessories
Mooring Products ........................................17-23
Sur-Moor Buoys • Accessories • Regulatory Buoys
Mooring Snubbers • Mooring Whips
Dock Edging ............................................... 24-26
Dock Pro Edging • Dock Wheels • Rubber Edging
Perimeter® Products ....................................27-30
Dock & Post Bumpers • Gunnel Guards • Sailing
Products (Lifelines, Covers, Spreader Boots)
Dock Products ............................................ 31-36
Bazooka Bailer • Dock Floats • Steps • Dock Carts
Piling Caps • D-Icer • Dock Boxes
Taylorbrite® Lighting .................................. 37-39
CCF Linear Lights • LED • Fluorescent
Boat Covers & Accessories ........................ 40-53
BoatGuard Covers • Trailerite Semi-Custom
Covers •Support Poles
Specialty Covers ..........................................54-56
Camouflage Covers • PWC Covers • Seat,
Console, Motor and Propeller Covers
Pontoon Accessories ....................................56-60
Pontoon Biminis • Pontoon Fenders • Pontoon
Shade Products
Inflatable Accessories ........................................61
Shade Top • Storage Bags
customers get the best service in the industry along with the best quality
Bimini Tops & Accessories .........................62-69
Tops • Support Poles • Boots • Hardware
cover available on the market.
Thank you for your continued support and trust in Taylor Made.
We work everyday to continue to earn that trust and look forward to doing
so again in 2011!
Happy Boating,
Bimi-Tee Tops & Accessories.......................70-71
Tops • Shades • T-Top & Console Covers
Specialty Products.........................................72-75
AnchorShade • Comfort Zone Misting System
Aerators & Fountains • Custom Replacement
Carpet
Flags, Pennants & Accessories ....................76-83
Military/Officer Flags • Novelty Flags and
Pennants • Pirate Flags & Hats • State and
International Flags • Flag Poles & Sockets
Hatches & Windshield Accessories ............84-85
Ultra III Hatches • Portlights • Replacement
Parts • Rainbreaker Glass Treatment
Jason Pajonk-Taylor
President
Taylor Made Products
A division of the Taylor Made Group, LLC
Merchandisers ..............................................86-87
Table Top Displays • Floor Displays • Bulk
Fender Bins
Web Services ....................................................88
Boat Covers, Bimini Tops & Fender Fit Guide
Program CDs
Warranty Information ......................................89
1
Survivor® Inflatable Vinyl Fenders
With
Pump
®
Survivor fenders provide a new level of protection for your boat. Lab-tested for durability and performance, these fenders feature an innovative
reinforced design and heavy-duty construction so they absorb collision better and last longer than standard fenders. In addition, with our
exclusive built-in Micro Pump™, these fenders have the advantage of being able to be inflated anytime, anywhere, without removing the fender
or having to use additional pumps, needles or adapters. The Micro Pump™ is not only convenient, but helps keep your boat free from damage by
keeping fenders properly inflated. Concealed pump pops out any time you need to add air, and locks in place when not in use. Choose from
Survivor® Twin-Eye fenders with tough, reinforced eyelets on either end or Survivor® CRT fenders, which are designed with a 3/4” diameter
Center-Rope-Tube for either horizontal or vertical deployment.
Raised diamond
ribs help
eliminate roll.
With the
Exclusive Built-in
Micro Pump™!
The Micro Pump™ is a fine
t u n i n g device that adds a i r
pressure in small amounts, so
your fender is never under
inflated and always ready!
Survivor® Twin-Eye Fenders
Double reinforced
ears for added durability.
White
Stock No.
Blue
Stock No.
D x L Size
Boat Size*
Case Qty.
#850622
#851622
6-1/2" x 22"
20' to 25'
6
#850824
#851824
8-1/2" x 26"
25' to 35'
4
#850128
#851128
10-1/2" x 30"
35' to 50'
2
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for
your boat is to survey your docking area to find out
what fender is in use for the same size and weight
as your boat, in terms of fender dimensions and
quantities, and use that as a guideline.
Add Air Anytime, Anywhere!
A 3/4" diameter center
hole accepts a heavy
line for securing
the fender.
Survivor® CRT™ Fenders
(Center-Rope-Tube)
White
Stock No.
Blue
Stock No.
Black
Stock No.
D x L Size
Boat Size*
Case Qty.
#850026
#851026
#860026
8" x 20"
25' to 35'
2
#850032
#851032
#860032
10" x 26"
35' to 50'
2
#850034
#851034
#860034
12" x 34"
50' to 60'
2
The INFUSION and Micro Pump trademarks are owned
by Spalding Sports Worldwide, Inc. and Lisco Sports, Inc.,
a Spalding affiliate and are license from Spalding
2
Integrated wrap-around
ribs strengthen the fender.
Super Gard™ Inflatable Vinyl Fenders
Double molded black ends
for added strength.
Rubber football needle valve
for easy inflation and long life.
Eye hole accepts
rope size up to 5/8"
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top
performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super
Gards™ feature a High gloss finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction
with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Navy
Blue
Stock No.
Red
Stock No.
Sand
Stock No.
Yellow
Stock No.
Fender Size
Case Qty.
5-1/2" x 20"
6
6-1/2" x 22"
6
8-1/2" x 26"
4
10-1/2" x 30"
2
White
Stock No.
Blue
Stock No.
Black
Stock No.
Teal
Stock No.
Cranberry
Stock No.
Hunter
Green
Stock No.
#950520
#951520
#952520
#959520
#953520
#954520
#957520
#955520
#960520
#950622
#951622
#952622
#959622
#953622
#954622
#957622
#955622
#960622
#950824
#951824
#952824
#959824
#953824
#954824
#957824
#955824
#960824
#958824
8-1/2" x 26"
25' to 35'
#950128
#951128
#952128
#959128
#953128
#954128
#957128
#955128
#960128
#958128
10-1/2" x 30"
35' to 50'
D x L Size
Boat Size
#958520
5-1/2" x 20"
15' to 20'
#958622
6-1/2" x 22"
20' to 25'
* The most accurate way to select the right fender for your boat is
to survey you r docking area to find ou t wh at fender
is in use for the same size and weight as your boat, in terms of
fender dimensions and quantities, and use that as a guideline.
3
Hull Gard® Inflatable Vinyl Fenders
Rubber football needle valve for
easy inflation and long life.
Reinforced molded-in eyelets
Valve seats are integrally molded
into the fender, not glued in like
the competition.
The finest utility fender on the market, Hull Gards® feature a unique oval design that prevents the
fender from rolling out of position. The Hull Gard® combines unsurpassed softness and superior
strength to provide boaters with the maximum protection available from a utility fender. All six
sizes feature inflation valves to adjust the level of firmness to satisfy all applications.
White
Stock No.
Blue
Stock No.
Black
Stock No.
Teal
Stock No.
Cranberry
Stock No.
Navy
Blue
Stock No.
Red
Stock No.
Sand
Stock No.
Yellow
Stock No.
Case Qty.
3-1/2" x 13"
12
4-1/2" x 16"
12
5-1/2" x 20"
6
6-1/2" x 23"
6
8-1/2" x 27"
4
10-1/2" x 30"
2
D x L Size
Boat Size*
#1020
#41020
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3-1/2" x 13"
to 10'
#1021
#41021
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4-1/2" x 16"
10' to 15'
#1022
#41022
#31722
#91022
#531022
#541022
#571022
#551022
#601022
#581022
5-1/2" x 20"
15' to 20'
#1023
#41023
#31723
#91023
#531023
#541023
#571023
#551023
#601023
#581023
6-1/2" x 23"
20' to 25'
#1028
#41028
#71028
#91028
#531028
#541028
#571028
#551028
#601028
#581028
8-1/2" x 27"
25' to 35'
#1024
#41024
#71024
#91024
#531024
#541024
#571024
#551024
#601024
#581024
10-1/2" x 30"
35' to 50'
to survey your dock in g area to fin d ou t wh at fender
4
Hunter
Green
Stock No.
Fender Size
Big B™ Inflatable Vinyl Fenders
Rubber football needle valve for
easy inflation and long life.
3/4" diameter center hole accepts
up to 5/8" diameter rope for securing
the fender.
Marine grade vinyl
lasts years in the sun.
The versatile Big B ™ fender incorporates a Center Rope Tube that allows end-to-end line passage. It can be hung vertically or horizontally with a
single line. Horizontal hanging is useful protection against pilings, awkward docking situations, and tidal change areas. Big B™ inflatable vinyl
fenders feature seamless construction, with molded ribs to minimize roll. Big B’s are made from the highest quality marine grade vinyl with a
high gloss finish. Available in four sizes to fit a full range of boat sizes.
Fender Size
Case Qty.
6" x 15"
6
8" x 20"
4
10" x 26"
2
12" x 34"
2
White
Stock No.
Blue
Stock No.
Black
Stock No.
Teal
Stock No.
Cranberry
Stock No.
Hunter
Green
Stock No.
Navy
Blue
Stock No.
Red
Stock No.
Sand
Stock No.
Yellow
Stock No.
#1025
#41025
#71025
#91025
#531025
#541025
#571025
#551025
D x L Size
Boat Size*
#601025
#581025
6" x 15"
20' to 25'
#1026
#41026
#71026
#91026
#531026
#541026
#571026
#551026
#601026
#581026
8" x 20"
25' to 35'
#1032
#41032
#71032
#91032
#531032
#541032
#571032
#551032
#601032
#581032
10" x 26"
35' to 50'
#1034
#41034
#71034
#91034
#531034
#541034
#571034
#551034
#601034
#581034
12" x 34"
50' to 60'
to su rvey you r docking area to find ou t wh at fender
5
Tuff End™ Inflatable Vinyl Fenders & Buoys
Fenders
Tuff End ™ fenders are for heavy duty marine applications.
Constructed from the same flexible, resilient vinyl as our Super Gard,
Big B, and Hull Gard fenders, the end in each Tuff End is injection
molded for extra strength and reliability. Tuff Ends are designed to
perform under the most demanding conditions.
Injection molded
ends tested to
2000 psi tensile
strength.
Tuff End™ fenders feature seamless construction, the strongest in the
industry!
* The most accurate way to select the right fender for your boat is to su rvey
your docking area to find out what fender is in use for the same size and
weight of boat, in terms of fender dimensions and quantities, and use that
as a guideline.
Great for larger boats
and rafting!
White
Stock No.
Blue
Stock No.
Diameter
Length
Line-Hole Diameter
Boat Size*
Case Qty.
#1182
#41182
6"
25"
1-1/16"
Up to 30'
12
#1185
#41185
8"
27"
1-1/16"
25' to 40'
8
#1188
#41188
10"
30"
1-1/2"
40' to 50'
5
#1191
#41191
12"
35"
1-1/2"
50' to 60'
4
#1192
#41192
15"
41"
1-1/2"
60' to 70'
2
#1193
#41193
19"
50"
1-1/2"
70' to 80'
2
#1194
#41194
24"
57"
1-1/2"
80' to 100'
1
#1195
#41195
32"
77"
1-1/2"
Over 100'
1
Buoys
Tuff End™ buoys feature heavy duty seamless construction to meet
the punishing demands of the commercial marine industry.
Trivalve™ for easy inflation
with football needle or
compressor. Located on
side for easy access.
*U.S. Patent #4,924,796
Valve located on
the side of the
buoy for easy
inflation.
Injection molded end
for high strength.
Tuff End™ fender ends are made from injection molded vinyl tested
to 2000 psi tensile strength, the strongest in the industry! Tuff Ends™
feature large line holes that will accept standard shackles. The
curved design hole prevents chafing.
Round Tuff Ends
White
Stock No.
Orange
Stock No. Diameter
Circumference
Line Hole
#61140
9"
28"
1-1/16"
14
18
#1143
#61143
12"
38"
1-1/16"
33
14
#1146
#61146
15"
47"
1-1/2"
65
6
#1149
#61149
18"
57"
1-1/2"
112
5
#1152
#61152
21"
66"
1-1/2"
180
3
#1155
#61155
27"
85"
1-1/2"
375
2
#1157*
#601157*
34"
107"
1-1/2"
790
1
* Rotationally molded end for high strength
6
Approx.
Buoyancy (lbs.) Case Qty.
#1140
T his product feat ures our
Patented* Trivalve,™ which
allows custom inflation with
almost every type of air
pump.
Designed to
perform under
the most
demanding
conditions!
™
Fenders
Big BSpecialty
Inflatable Vinyl
Fenders
Fender Cushions™
Width
Lateral reinforcement to
resist compression.
Rubber football needle
valve for easy inflation
and long life.
CAUTION: The Fender Cushions must never be used as life
saving devices.
Diameter
3 Sizes to Fit All Boats
The only fender specifically designed for maximum protection when rafting or tying up against
solid walls. This unique rectangular cushion will provide greater protection from boats jarring into
each other than conventional fenders. Six molded tubes provide crush resistance, and the
exclusive channel design lends itself to “hugging” the boat. Fender Cushions ™ are made from
tough marine grade vinyl and feature an inflation valve for air pressure adjustment. Fender
Cushions™ may be hung vertically or horizontally. They make great piling cushions and are
extremely comfortable as seat cushions.
Low Freeboard
Fenders
Stock No.
Length
Width
Diameter
#46090
15"
15"
6-1/2"
#46095
20"
20"
7-5/8"
#46100
26"
26"
9-5/8"
U.S. Patent #5,013,272. Design Patent #318,312.
The first boat fender to address the needs of low freeboard boats. Shaped to protect the gunwales and
rubrail, the Low Freeboard fender offers superior protection compared to regular fenders against
high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting
protection where it is needed. Made from specially formulated tough marine grade vinyl and features
an inflation valve for air pressure adjustment. Standard size measures 14" long and larger size measures
23" long for increased hull protection.
Stock No.
Color
Diameter
Length
#31005
White
5"
14"
#31006
Metallic Black
5"
14"
#31045
Metallic Green
5"
14"
#31055
Metallic Red
5"
14"
#31007
White
7"
23"
#31008
Metallic Black
7"
23"
U.S. Patent #5,671,692
Classic Mermaid Fenders
No boat is complete without the
lady on board.
Made from soft
white vinyl with
inflation valve.
Stock No. #34444
Approx. size 5" x 22"
7
Specialty Fenders & Buoys
Transom Fender
Uniquely shaped to fit the stern of a sailboat or the edge of
most swim platforms up to 4” thick. An integral 3/4” diameter
tube allows a securing line to pass from end to end while a
contoured shape helps ‘grip’ the fendering location. Made
from soft, flexible vinyl. Rubber football inflation valve to
adjust the level of firmness to satisfy all applications.
Stock No.
Size
#56090
10" x 22"
U.S. Patent #6,477,973
Modular Flat Fenders
Made from closed cell EVA, these fenders will not puncture
or absorb water. Their flat design keeps them from rolling or
riding up. They can be fastened together with our hook and
loop strap to create a modular system. Easy to store, these
fenders can also double as a knee pad or seat cushion.
Stock No.
Color
Size (LxWxD)
#311
Blue
20" x 8" x 2"
#313
Gray
20" x 8" x 2"
#314
Blue
24" x 12" x 3"
#316
Gray
24" x 12" x 3"
#317
Blue
36" x 12" x 3"
#318
Gray
36" x 12" x 3"
PWC Fender
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to “hook”
under the bond flange for quick attachment. Flex areas on the fender provide a “hinge”
action that allows the fender to conform to the shape of the watercraft. The PWC fender
features an inflation valve for air pressure adjustment and includes a suction cup and
securing line.
Cranberry
Stock No.
#1063
Hunter Green
Stock No.
#1064
Red
Stock No.
#1066
Yellow
Stock No.
Purple
Stock No.
White
Stock No.
Blue
Stock No.
#1067
#1068
#1069
#1075
U.S. Patent #6,021,729
Custom Logo Promotional Fenders
Put your logo where it will be noticed, on the #1 selling Fenders in America! Logo’s
can be pad printed, or be designed on a specially made molded-in decal label. Only
Taylor Made Products can offer you the opportunity to have your logo on the fenders
you sell. Camera ready artwork is required, and minimums apply to each logo process.
Typical fender choices for logo process include Hull Gards and Big B’s. Ask your Taylor
Made Products sales representative for more details and ordering information.
Your Logo Here!
8
Specialty
& Buoys
Big B™Fenders
Inflatable Vinyl
Fenders
Freedom Fenders - The Worlds Only Self-Centering Fender
These Mega fenders are made from 40 oz. PVC that is specially coated for oil
resistance. Reinforced with heavy duty 60 oz. PVC to insure the ultimate protection.
All seams are heat and pressure welded. Lightweight enough for any crew member to
handle easily. These fenders can be relocated instantly by any one person! No more
dragging huge fenders across the deck!
U.S. Patent #6,435,122
Stock No.
Color
Length x Dia.
#FF4818B
Black
48" x 18"
Boat Size
70'-100'
#FF4818G
Gray
48" x 18"
70'-100'
#FF5825B
Black
58" x 25"
100'-200'
#FF5825G
Gray
58" x 25"
100'-200'
U.S. Patent #D452466
Deflates by simply
opening the valve
and rolling up the
fender. Once rolled
up they can be stowed
almost anywhere!
Stays on pilings no matter which
way the boat moves!
Rotationally molded from heavy gauge PVC, freedom fenders feature a needle valve for easy inflation.
The patented V shape stays on pilings no matter which way the boat moves. The recessed line holders
allow them to fit standard fender racks. Hang them vertically or horizontally for the ultimate in versatility whether docking on pilings, floating docks or mooring!
Stock No.
Color
Length x Dia.
Boat Size
#FF2685W
White
26" x 8.5"
25'-35'
#FF2685B
Black
26" x 8.5"
25'-35'
#FF3212W
White
32" x 12"
35'-65'
#FF3212B
Black
32" x 12"
35'-65'
Water Ski Marker Buoys
Made from PVC these lightweight but durable inflatable
buoys will mark your slalom course in accordance with the
AWSA specifications (American Water Ski Association.)
Each buoy has a molded-in loop to fasten anchor line and
contains an inflation valve for air pressure adjustment.
Buoys are 9" in diameter.
Green
Stock No.
#161
Personal Watercraft Buoys
Hang them vertically
or horizontally!
Red
Stock No.
#164
Yellow
Stock No.
Approx.
Buoyancy
(lbs.)
#165
13
This multi-use rugged float can be used as a pick-up buoy, marker buoy, or fender.
Makes a great marker for water ski events and can be used as a fender for personal
watercraft. Available in white or high visibility fluorescent colors. Taylor’s unique
double color system incorporates a “back-up” color that resists fading. Taylor
fluorescents will retain their color long after the competition’s has faded away.
Buoys measure 8" diameter with an approximate buoyancy of 8 lbs.
Stock No.
Color
Stock No.
Color
#140
White
#144
Rocket Red
#141
Neon Green
#145
Neon Yellow
#142
Neon Red
#148
Purple
#143
Orange
9
Fender Boots
Fleece Fender Boots
Finally a fender cover specially designed to fit CRT™ (Center Rope Tube) style
fenders. These will provide your boat with the ultimate in hull protection. No
marring or color transfer to your boat. Constructed from 12 ounce Blizzard Fleece,
these 100% polyester fender boots are available in blue or black and come with
reinforced grommetted top with an adjustable tie on opposite end for a snug fit.
Navy
Stock No.
Black
Stock No.
#9035
#9031
8" x 20"
#9036
#9032
10" x 26"
Fits Fender Size
Specially designed for
CRT™ Fenders
(Center Rope Tube)
Premium Fender Covers
Covers are knit from heavy weight, high tenacity solution dyed nylon yarn that stands up to sunlight,
abrasion and harsh environments. The fabric is a circular knit construction to eliminate lateral seams
(that can fail due to the added friction) and has a high degree of elasticity to maintain its shape and ensure
a nice tight fit to your fender. The covers are secured, both top and bottom, with an adjustable, high
strength polypropylene rope that keeps the cover in place yet allows for easy removal for cleaning. By
combining superior fabric with these excellent construction features, Taylor delivers a fender cover that
won’t fail after only a season or two, but will look great and provide lasting protection for many years.
Navy
Stock No.
Black
Stock No.
Hull Gard
Fits Fender Sizes
Super Gard™
Big B™
#9075
#9079
6-1/2" x 23"
5-1/2" x 20"
6" x 15"
• Available in (2)
popular colors.
#9076
#9080
8-1/2" x 27"
8-1/2" x 26"
8" x 20"
• Sold individually
#9077
#9081
10-1/2" x 30" 10-1/2" x 30"
#9078
#9082
Taylor Tux® Fender Boots
• Circular knit fabric eliminates lateral seams.
®
—
New Longer
Lasting Fabric!
—
10" x 26"
12" x 34"
Traditional Fender Boots
• Knit fabric hugs the fender for a close fit.
• Solution-dyed nylon fabric will not
fade or bleed.
• Smooth polyester fabric resists
picking up dirt and grit.
• Synthetic fabric for maximum
sunlight resistance.
• Neoprene sewn into
the hem keeps
the boot on
your fender.
• Adjustable rope sewn into
hem (top and bottom)
provides custom fit.
2 Popular Colors
• Tear and abrasion resistant
• Sold in pairs
• Machine washable
• Sold individually
10
Black
Stock No.
Fits Fender Sizes
Big B™
#5001
#5041
5-1/2" x 20"
Blue
Stock No.
Black
Stock No.
Cranberry
Stock No.
Hull Gard
#9050
#9051
#9052
6-1/2" x 23"
5-1/2" x 20"
6" x 15"
#5002
#5042
#9054
#9055
#9056
8-1/2" x 27"
8-1/2" x 26"
8" x 20"
#5003
#5043
8" x 20" & 8-1/2" x 27"
#5044
10" x 26" & 10-1/2" x 30"
#5045
®
Fits Fender Sizes
Super Gard ™
Blue
Stock No.
#9058
#9059
#9060
10-1/2" x 30"
10-1/2" x 30"
10" x 26"
#5004
#9065
#9066
#9067
—
—
12" x 34"
#5005
6" x 15" & 6-1/2" x 23"
12" x 34"
Fender Accessories
Tidy-Ups™ Fender Adjuster Kits - To Match Taylor Made True Color
®
™
Fenders
The finest looking, top performing fender adjusters available. New Tidy-Ups™ Kits include
(1) Tidy-Ups™ Fender Adjuster and (6) feet of 3/8” solid braid polypropylene rope. Made
from high quality marine grade components, they are quick and easy to use. Simply snap
adjuster over your lifeline, railing, or stanchion and set fender height in an instant.
Polypropylene rope is color matched to your Taylor fender (available in 8 colors). It will
not fade or kink, and is mildew and rot resistant. A pre-spliced and professionally finished
end allows your fender to be tightly secured without hard to untie knots.
Tidy-Up Kit
Stock No.
Rope Color
Tidy-Up Kit
Stock No.
Rope Color
#1131
White
#1135
Cranberry
#1132
Blue
#1136
Hunter Green
#1133
Black
#1137
Navy Blue
#1134
Teal
#1138
Sand
NEW
Stronger
Vinyl Straps!
2 Pk. Fender Line
Stock No.
Rope Color
Fender Loc Fender Lines
#11311
• Provides an adjustable and secure tie-off for
your boat fenders.
White
#11312
Blue
• Built-in loop eliminates knot tying and works on
all types of fenders.
#11313
Black
#11314
Teal
• Includes (2) - 6’ fender loc lines; 3/8” diameter.
#11315
Cranberry
• Polypropylene rope is color matched to your
#11316
Hunter Green
#11317
Navy Blue
#11318
Sand
Taylor fender.
• Comes in 8 True Colors™ to best match your boat!
Tidy-Ups Fender Adjuster
™
• Quick and simple. These fender
adjusters simply snap over your lifelines or railing and are ready to use.
NEW
Stronger
Vinyl
Straps!
Tidy-Ups Line Holders
™
• UV resistant vinyl strap
securely holds rope, cords,
etc.
• Holds lines up to 5/8" in diameter.
Stock No.
Description
Rail Size
#1015
White Vinyl
Standard
#1016
Black Vinyl
Standard
#1017
Blue Vinyl
#1018
White Vinyl
Stainless Steel Fender Racks
Stock No.
Rail Size
Standard
#1019
Fits 1 1/2"- 2" Rails
Large
#1101
Fits 1"- 1 1/4" Rails
• Cross reinforced for extra strength.
• High gloss #316 stainless steel.
• Completely pre-assembled!
• Tightens to accommodate any angle.
• Moveable “J” hooks mount on 7/8" rails
and stanchion system.
Fender
Diameter
• Holds any style fender.
• Folds flat for easy storage.
2-Fender Units
Stock No.
Oversized “J” Hooks
• Fits all standard 1" or 1 1/2"
railings for Taylor Made stainless
steel fender racks.
• Sold in single packs.
3-Fender Units
Stock No.
Up to 7"
#2007
#3007
7" to 9"
#2009
#3009
Stock No. Description
9" to 11"
#2011
#3011
#32191
Oversized “J” hook, fits 1" - 1 1/2"
11
Fender Accessories
Vertical Rail Fender Hanger
Quick Knot™ Fender Hanger
Finally a fender hanger for vertical rails!
Made of tough nylon, this fender hanger
attaches to rails 7/8" to 1" diameter with
2 screws and then grips the fender rope
with its heavy duty teeth making rafting
and docking easier than ever. Accepts
rope size up to 5/8".
Tired of tying knots? This easy to use fender
hanger allows the quick placement of fenders
anywhere there is something to tie off to,
without having to tie a knot. The rope is
threaded through the quick knot’s heavy duty
molded nylon system, hanging the fender
quickly and securely. No need to waste time
with cumbersome and unsecured knots!
Perfect for 1/4" rope.
Stock No.
#1099
Stock No. #1098 - sold 4 per pack
Rail Mount Fender Hanger
Line Hanger
Universal mounting and easily adjustable
fender hanger. Durable PVC mounting band
snaps over any rail, lifeline or stanchion.
Slide hanging rope through adjusting buckle,
loop rope back and pull down to secure. To
adjust, pull up on buckle and pull rope to
desired length.
Keep loose lines and power cords neatly in
place. Durable PVC mounting band snaps over
any rail, lifeline or stanchion. Snap the bottom
section around your coil of rope or cord to
secure. Measures 9 1/2" in length.
Stock No.
#1007
Stock No.
Ratcheting Fender Hanger
Constructed from 3/4” polyester webbing
with UV protection. This unique hanger
allows you to adjust your fender height from
6” to 24”. Simply loop the strap over any
size rail or lifeline, feed end of strap through
fender eye or tube and pull
strap through buckle to
desired length. Slide tab into
release buckle until you reach
the tightness around your rail
or lifeline that you desire.
Stock No.
#1089
Clothes Claws™ Boaters’ Clothespin
#1006
Rail Fender Hanger
Made from injection molded, high impact and
UV- resistant nylon. This unique design makes
it easy to adjust fender heights and locks in
place with a jam cleat - no knots. Uses 1/4" to
1/2" line.
• Finger tip adjusting
• Durable
• Flexible
• No moving parts
• Secure
Stock No.
Description
#1108
Fits up to 1" rails
#1109
Fits up to 1 1/4" rails
Hand Pump with Hose Adapter
• Fits all 7/8" to 1" tubular railings.
• Has incredible holding power.
• High quality plastic molded with
UV inhibitors.
• Compact hand pump for
filling fenders, rafts, etc.
• One-piece construction is unbreakable
under normal use.
#1650
#1651
12
Clothespins (4 per pack)
Display box with 48 pieces
Stock No.
Unaffected by saltwater.
Plus...it floats!
Description
#1005
Hand pump with hose adapter
#31010
Pack of 3 inflation needles
Fender Accessories
Big B™ Fender Hanger
Hook & Loop Fender Strap
• Injection molded reinforced nylon for strength.
• A quick easy way to adjust the height of your
fenders!.
• Vented to prevent water accumulating
in fender tube.
• Fits 3/8”
• Professional “finished” look.
diameter rope.
Designed for use on Taylor Made fenders with 3/4”
I.D. tubing. Maybe used on other brands; but due to
variation among brands the consumer must verify a
tight enough fit between the tube and product for
proper function (Center tube must be small enough
to keep the product halves firmly together).
Stock No. #1085 - Sold three (3) per pack
Stock No. #11085 - Table top merchandiser (36 pk.)
Rail/Lifeline Fender Bracket
• Simply loop through fender, pull strap
through, buckle to desired length and secure.
• Made from 3/4” Polyester webbing with UV
protection and marine grade Hook & Loop
fasteners.
Stock No. #1094
Length: 36" (sold in pairs)
Stock No. #1095
Length: 60" (sold individually)
Lifeline Fender Clip
• Injection molded nylon clamp brackets mount
securely to 7/8"-1" railings or up to 1/4"
lifelines.
• Injection molded polyethylene
clamp brackets mount securely to
your 3/16" to 1/4" lifelines.
• Double locking clamp design provides for a
quick and easy fender height
adjustment.
• Use for hanging fenders, holding
power cords etc...
• Use on 1/4"- 5/16" Rope
• Use on 3/16"- 1/4" Rope
• Sold in pairs
• Sold in pairs
Stock No.
#1097
Rail Mount Fender Line Clip
• Injection molded polyethylene clips that
mount securely to your 7/8" railings.
• Use for hanging fenders,
holding power cords etc...
• Sold in pairs
Stock No.
#1093
Stock No.
#1096
No Knot™ Fender Hanger
No more need for knots in your lines! The No
Knot Heavy duty marine nylon fender hanger
keeps your fender in place with a simple system.
Just attach the rope over the rail, and weave it
through the gripper teeth. Your boat is safe and
fender protected without using knots.
Stock No.
#1105
1/2” Stainless Steel Fender Lock
Traditional Stainless Steel Fender Lock
Taylor Made Products has designed a larger
version of it’s best selling 1010 Fender
Adjuster. Stainless Steel construction, adjustment peg, and fastening screws
ensure many years of dependable
service in the harsh marine
environment. The “one-way”
locking peg provides secure and
reliable mounting and allows the
use of up to 1/2" diameter rope. Mounting
hardware included. Sold individually.
• These low profile fender lock bases
make hanging fenders fast and easy.
Stock No. #1001
Stainless Steel 1/2" Fender Lock & Peg
• Available with fixed or adjustable
fender pegs. Mounting screws included.
• Accepts rope sizes up to 1/4"
St ock N o.
Description
#1010
O n e lock an d peg
#1009
Extra p eg
#32115
A djustab le fend er lock set
#32116
A djus tab le peg only
13
Life Rings
All Rings Meet USCG Approval - For Both Recreational And Commercial Use
Life Rings
Inspected and tested in accordance with U.S. Coast Guard regulations.
All rings contain unicellular polyurethane foam for buoyancy. Floating
polypropylene grab lines contain UV stabilizers to enhance sunlight
resistance. PE and vinyl skin versions feature molded-in becket design,
vinyl coated foam versions use sewn beckets to secure grab line.
Choose between energy absorbent vinyl skin, vinyl coated foam, or
tough, hard shell polyethylene skin. SOLAS approved models
equipped with reflective tape.
Vinyl Coated
Foam
Vinyl Coated Foam
White w/White Rope
Stock No.
Orange w/White Rope
Stock No.
Buoy
Diameter
Minimum
Buoyancy (lbs.)
#360
#363
20"
16.5
#361
#364
24"
16.5
#380
#383
30"
32
White w/White Rope
Stock No.
Orange w/Black Rope
Stock No.
Buoy
Diameter
#567
#569
24"
16.5
#568
#570
30"
32
#571 ††
30"
32
Polyethylene Shell
—
Minimum
Buoyancy (lbs.)
Polyethylene
Shell
Aer-O-Buoy™ Life Rings
Horseshoe Buoy
Meets Canadian Coast
Guard approval. Tough
outer polyethylene shell
is resistant to gasoline,
oil, saltwater, and pool
chemicals. Closed-cell
foam core for buoyancy.
Unique grabline threading
threading system allows
for replacement.
Along with Ring Buoys, Taylor Made Products offers a line up
of USCG specified Horseshoe Buoys. All models incorporate
a
closed cell foam core, tough vinyl fabric covering (flame retardant) with heavy duty zipper, that will not rot or mildew and
stainless steel hardware. Deluxe Model includes sewn-in sea
anchor to slow buoy in water.
Stock No.
Description
Color
Size
#557
Horseshoe Buoy
Yellow
22" x 3"
#558
Horseshoe Buoy
Yellow
24" x 4"
White
24" x 3"
#559
White
w/White Rope
Stock No.
Buoy
Diameter
Minimum
Buoyancy (lbs.)
#570001
24"
16.5
—
#570003 ††
30"
32
—
#570004 †
30"
32
#570002
Orange w/White Rope
Stock No.
Reflective tape on 30” diameter ring buoys only.
† SOLAS approved ring suitable for quick release from the bridge.
†† SOLAS approved.
SOLAS - “Saving of Lives at Sea”
14
Deluxe Horseshoe Buoy
Life Ring Accessories
Stainless Steel Life Ring Holder
Life Ring “J” Hooks
These stainless steel holders will
mount on any 7/8" or 1" railing or
stanchion. Elastic cord holds your
buoy secure.
Stainless steel “J” hooks
designed to hold ring buoys up
on any wall, fence, wheelhouse,
etc. Mounting screws not
included.
Stock No. #2013
Stock No. #2016
Ring Buoy Rack
Life Ring Holder
This stamped aluminum holder is
powder coated to withstand the
harsh marine environment. It
mounts to any 7/8" or 1" railing.
Complete with a nylon strap to hold
your buoy secure.
Designed to securely hold 3" and 4"
thick buoys and adjusts for 20" and
24" diameters. Buoy holder made
from heavy wall steel and powder
coated silver for years of trouble free
service. Stainless steel fasteners
included.
Stock No. #2015
Stock No. #2020
Life Ring Station
Rugged polyethylene case houses one
24" ring. Ring station permanently
locates life ring and protects ring from
constant weather exposure. Bright
yellow color for high visibility. Clear
vinyl cover quickly detaches to access
life ring.
Stock No.
Description
#570006
Life ring station
#570007
Life ring station replacement vinyl cover
#570008
Life ring station w/#570001 ring & 50' rope
#570009
Life ring station w/#570002 ring & 50' rope
#570005
3/8" yellow poly rope x 50'
Eco Blast™ Rechargeable Air Horn and Kit
Just pump in new air! The refill valve of the Eco Blast air horn lets you recharge using a Taylor
Made ® Mini Air Pump or any bicycle pump, service station air pump or air compressor. In seconds, Eco Blast is again ready to emit a powerful 120 db signal that meets all U.S.C.G. requirements. Eco Blast beats out chemical horns, too, because it operates in all weather and temperature extremes...can be safely stored or used near a heat source...works in any position...and
leaves no rust rings on surfaces. Plus, with Eco Blast there’s no worry about a potentially harmful chemical escaping into the environment.
#616
Eco Blast - horn only
#618
Eco Blast kit (w/Air Horn & Hand Pump)
NEVER buy an
expensive refill
canister again!
Eco Blast™ Mini Air Pump
Our versatile Mini Air Pump is always handy to have around. Use it to quickly refill your Eco Blast
Rechargeable Safety Signal Air Horn. Or to inflate boat fenders, bicycle tires, rafts, water toys and
more. The Mini Air Pump comes with two interchangeable valves for adaptability and generates up to
100 psi of pressure. Easy to use, stores anywhere!
Stock No.
#617
15
Decorative Ring Buoys & Accessories
Decorative Ring Buoy*
Spruce up your pool or spa area with our new line of decorative life rings.
• Rings are constructed from water-proof non absorbent closed-cell
foam.
• Comes equipped with sewn-in polypropylene grab lines and decorative
blue bands.
• Available in 3 popular sizes.
• Don’t forget to customize your ring buoy with our Life Ring letter kit.
Stock No.
Description
Color
#371
17” Diameter decorative ring
white/blue
#372
white/blue
#373
white/blue
*DECORATIVE USE ONLY NOT
A LIFE SAVING DEVICE
Ring Buoy Holder with Heaving Line
• Ring holder is constructed from anodized aluminum.
• Fits all sizes of ring buoys.
• Comes complete with 30’ or 60’ mildew resistant,white
U.V. polypropylene floating heaving line with attached
rope float.
• Float also sold separately for use with swim area floating
ropes or nets. Accommodates rope up to 3/8" diameter.
Stock No.
#374 Ring Buoy Holder w/60’ heaving line
Stock No.
#375 Ring Buoy Holder w/30’ heaving line
Stock No.
#376 3"x5" Red/White solid foam float (1 per/pk.)
Life Ring/Ring Buoy Letter Kit
Now you can customize your life ring with our
Taylor Made Lettering kit. Package includes 2"
black letters and numbers (4 ea.) plus symbols.
Constructed from waterproof marine grade 4 mil
vinyl, resistant to fuel, chemicals, fading and
scratching. Application template included.
Stock No.
16
#600015
Sur-Moor™ Buoys
The sole purpose of the mooring buoy is to support the mooring chain. The two
preferred designs for mooring buoys are a traditional buoy with hardware or a buoy with
a tube through the center. Both offer reliable flotation and will last for several seasons,
depending upon the salinity of the water. Obviously, freshwater applications will extend
the useful life of any mooring system.
Once the type of buoy has been selected, the next question is selecting the proper size.
Buoy floatation is measured according to the pounds of buoyancy that they provide. A
buoy floatation rating is based on the amount of weight that it can suspend while
remaining afloat just below the surface of the water. As a general rule, you should select
a buoy that offers slightly more than twice the amount of floatation that is required for
the weight of the anchor chain you will be using. (e.g., 50 lbs. of anchor chain will
require a buoy with a floatation rating of slightly over 100 lbs.) This ensures that the
stripe appears above the water line.
WARNING: The sole purpose of the
mooring buoy is to support the mooring
chain. The boat should be tied to the
anchor chain, never tied to the buoy or
hardware.
Sur-Moor™ T3C™ Mooring Buoy
A permanent mooring system, when properly designed, should securely position a boat
so that it can be left unattended, with little attention, for long periods of time. Each
system usually consists of a mooring buoy (to float the chain), a mooring anchor and a
length of chain (running between the anchor and the mooring buoy). Also the proper
ground tackle includes correct sized galvanized shackles and swivels. Always keep in
mind, that the mooring system is only as reliable as the “current” conditions of the
environment.
All Taylor Made® Sur-Moor™ Buoys are built to withstand the constant abuse of most
mooring environments.
Sur-Moor ™ hard skin mooring buoys have a seamless and tough, one-piece
polyethylene shell. Hard skin shells feature ultraviolet light absorbers for
long-term life under the sun, and have a sandblasted finish which allows the buoy
to be easily painted for identifying. Filled with closed cell foam to positively
displace water. Tube-through-the-center design with blue reflective striping.
Hardware not included.
Stock No.
Tube Diameter
Buoy Diameter
Circumference
Approx.
Buoyancy† (lbs.)
#46370
2"
12"
38"
30
#46371
2"
15"
47"
60
#46372
2-1/2"
18"
57"
100
#46374
2-1/2"
24"
75"
240
#46375
3"
30"
95"
460
Three-year flotation warranty on all hard skin buoys
Flanged collar made from rigid PVC tubing. Blue stripe is reflective for nighttime visibility.
Sur-Moor™ Shackle Buoy
The rope nest design has a built in cup shape at the top of the buoy that allows the
anchor shackle to nest below the buoy surface. This recessed area helps shield the
shackle from contacting the boat hull while making a convenient nesting place
for the pennant line when the boat departs from the mooring. The hard-skin
polyethylene shell is UV protected to resist the weathering effects of sunlight and is
foam filled to positively displace water. Hard skin shell now has a sandblasted finish
which allows the buoy to be easily painted for identifying. Tube-through-the-center
design with blue reflective striping. Hardware not included.
Stock No.
#46818
Tube Diameter
2-1/2"
Buoy Diameter
Approx.
Buoyancy†(lbs)
18"
100 lbs.
† Buoyancy rating: The number indicated is the maximum flotation the buoy provides while fully submerged.
50% of this value will be the weight the buoy can support at the level of the blue stripe.
17
Sur-Moor™ Buoys
Sur-Moor™ Taper Buoy
The Sur-Moor™ taper shape design places more floatation area at the waterline
creating a higher visibility mooring. The hard-skin polyethylene shell is UV
protected to resist the weathering effects of sunlight and is close cell foam filled to
positively displace water. Shell has a sandblasted finish which allows the buoy to be
easily painted for identifying. Available in the Tube-Through-The-Center design
with blue reflective striping. Hardware not included.
Stock No.
Buoy Height
Approx.
Buoyancy†(lbs)
Tube Diameter
Buoy Diameter
#46718
2-1/2"
18"
16-3/4"
70 lbs.
#46724
2-1/2"
24"
22-11/16"
165 lbs.
#46730
3"
30"
30"
410 lbs.
Traditional Sur-Moor™ Mooring Buoy
• Hot-dipped galvanized steel hardware included.
• Blue stripe is reflective for nighttime visibility.
• Sandblasted finish allows the buoy to be easily painted for identifying
Stock No.
Diameter
Circumference
Approx.
Buoyancy†(lbs.)
#22170
12"
38"
30
#22171
15"
47"
60
#22172
18"
57"
100
#22174
24"
75"
240
WARNING – Mooring lines must never be tied to the top loop. Mooring
lines should always be attached to the anchor chain.
Sully Stick™ Winter Stick
A long tapered buoy used in place of a standard round mooring buoy during the winter months.
The Sully Stick has a molded in eyelet at the top for easy retrieval and is close cell foam filled
to positively displace water. The base eyelet is reinforced with a galvanized metal bushing to
attach a rope and connect to the anchor chain. The shape of the Sully stick helps it escape ice
entrapment better than a round buoy and can extend the useful life of a mooring buoy by
protecting it from the damaging effects of freezing temperatures.
Approx.
Stock No.
Diameter
Length
Buoyancy†(lbs)
#22140
6"(widest point)
80"
40 lbs.
#22120
6"(widest point)
31"
15 lbs.
T3C™ Mooring Collar
Galvanized
protective
collar.
Buoy Hardware
Hot-dip galvanized steel collar protects your T3C buoy
from anchor chain wear, prolonging the life of the buoy.
Designed to work in combination with standard shackles.
Mooring collars are sized to slip into the top of 2" or 2-1/2"
tube diameters.
1/2" diameter hot-dipped
galvanized rod with 4" long
swivel, 2 galvanized washers
and nylon core lock nut.
Stock No.
Tube Diameter
Fits T3C Stock No.
#33020
2"
46370 and 46371
Stock No.
Size
46372 and 46374
#33012
12"
46375
#33015
15"
#33018
18"
#33024
24"
#33025
#33028
2-1/2"
3"
Swivel only
† Buoyancy rating: The number indicated is the maximum flotation the buoy provides while fully submerged.
50% of this value will be the weight the buoy can support at the level of the blue stripe.
18
Stock No.
#35647
Buoy Accessories
Bridle Plate Mooring System
Storm Surge Anchor System
Mooring attachment system that allows up to three lines from the
mooring to your boat. The system maintains mooring line separation
to minimize chafe and increase line life. No more tangled mooring
lines! Two systems are available for multi-hulls (3 lines to boat) or
mono-hulls (2 lines to boat). Also available with safety shackles and
swivel that utilize nuts and cotter pins that eliminate the need for
wire seizing. For boats 25’-60’ in length and 8,000 lbs-fSWL (safe
working load). Breaking strength 32,000 lbs-f. The system can use up
to 1 inch lines with normal thimbles or 3/4” lines with HD thimbles.
Recommended attachment point is below the mooring buoy.
System allows for the placement of three anchors on a swivel and up
to three lines back to the boat. The boat can swivel on the anchors
without getting anchor chains and lines twisted around each other. For
boats 25’-60’ in length and 8,000 lbs-fSWL (safe working load).
Breaking strength 32,000 lbs-f. It comes complete with galvanized
bridle plates, shackles and a swivel. Also available with safety shackles
and swivel that utilize nuts and cotter pins that eliminate the need for
wire seizing. The system can use up to 1” lines with normal thimbles
or 3/4” lines with HD thimbles. 3/8” HDG shackles are needed for
attaching chain to the system.
Monohull
Monohull
Multihull
Stock No.
Description
#33040
Monohull (2 shackle attachment points)
#33040S
#33050
#33050S
Monohull (2 shackle attachment points) with safety shackle
Multihull (3 shackle attachment points)
Multihull (3 shackle attachment points) with safety shackle
Stock No.
Description
#33060
Monohull
#33060S
#33070
#33070S
Monohull with safety shackle
Multihull
Multihull with safety shackle
Solar Warning Light
• Solar powered light charges during the daylight hours and
automatically turns on at dusk to alert boaters of hazards.
• Easily attaches to buoys, docks, moorings, or anything else that
needs night time identification.
• The light comes equipped with steady on mode, slow flash (15
times/minute), and fast flash (60 times/minute) all within the
same unit.
• Available in white, red, or green LEDs. All come with clear lens.
• Unit is constructed with a tough, waterproof (not submersible)
plastic housing to keep the light working in all conditions.
NOTE: Check with the local agency governing your waterway
before installing.
Stock No.
Description
#46106
White warning light
#46107
Red warning light
#46108
Green warning light
19
Sur-Moor™ Buoys
Sur-Mark™ Marker Buoys
Sur-Mark ™ and Sur-Mark™ II regulatory buoys
are molded from tough UV protected polyethylene,
and are close cell foam filled to positively displace
water. One-piece seamless construction, internal
concrete ballast, recessed galvanized eye; both
styles stand upright for storage. Color labels and
Solar Lights (sold separately) fit both styles. Chain
and hardware not included.
#950410
#950400
#46104
Buoys include orange
#46103
marking tape.
Stock No.
Style
Ht.
#46103
Sur-Mark II
61"
9"
—
15
37"
#46104
Sur-Mark
49"
10"
18"
40
39"
#950400
Green Sur-Mark
49"
10"
18"
40
39"
49"
10"
18"
40
39"
#950410 Red Sur-Mark Nun
Label sold separately.
Approx.
Col. Large Buoyancy Visible Ht.
Dia. Ring Dia. (lbs.) Above Waterline
Sur-Mark™ Buoy Labels
• Fade resistant, self-adhesive vinyl
marker labels.
• Brightly colored for high visibility.
• Two labels required per buoy (sold in
pairs).
• Each label is 13" wide x 24" long to
fit either Sur-Mark™ or SurMark™II.
• All labels are warranted for 5 years
against weathering or fading.
20
#46176
#46177
#46183
#46184
#46171
#46172
#46173
#46178
#46179
#46180
#46186
#46187
#46185
#46174
#46181
#46188
#46175
#46182
#46191
Regulatory Buoys
Regulatory Buoys
Taylor Made Products manufactures the most rugged and complete line of
navigational buoys in the United States. We have been meeting the stringent
requirements of states, municipalities, and private harbors for many years. Our
buoys are used in the toughest applications.
Regulatory buoys feature rotationally molded high density polyethylene shells
that are UV stabilized. The rotational molding process allows for uniform wall
thickness without the internal stresses that cause cracking over time and under
extreme temperature changes. This process imparts tremendous impact strength
to the shell.
Three-year
flotation warranty
on all hard skin buoys
Overall
Max.
Approx.
Buoyancy
Stock No.
Description
Height
Diameter
(lbs.)
#950280
Red Nun
48"
24"
235
#950290
Green Can
48"
24"
235
#950300
Danger Can
48"
24"
235
Shaped Buoys
Special shapes for specific customer needs with the same great features
and benefits as Sur-Moor™ hard skin buoys. Standard product is colored
and marked as shown.
#22127
Available in standard red or green navigational colors.
Custom colors and molded-in markings available upon request.
#22138
Stock No.
Shape
Overall Height
Max. Diameter
Approx.
Buoyancy (lbs.)
#22127
Spar
31"
6"
15
#22137
Cone
26"
16"
70
#22138
Can
24"
13"
40
#22139
Nun
24"
13"
40
#22137
#22139
Mast Buoys
NEW Improved Design!
No more
fiberglass slivers!
Approx.
Buoyancy (lbs.)
Stock No.
Mast Length
#22105
48"
6
#22106
74"
6
#22126
96"
6
• Perfect as a pick-up buoy and ideal for all diving
applications.
• Newly designed 5/16" diameter pultruded fiberglass
mast with PVC outer layer adds strength, flexibility
and no more fiberglass shards to become exposed.
• Float is Urethane foam filled - Blow-molded high
density polyethylene outer shell provides great
floatation and years of service.
• Corrosion resistant Vinyl coated cast metal weight
for superior scratch protection for your boat
21
Mooring Products
Rubber Mooring Snubber
Mooring Line Shock Compensator
Made from super elastic isoprene natural rubber. Our
NEW design eliminates the self-locking internal system,
which caused unnecessary stress on the dock lines. These
LineSaver Mooring Snubbers prevent mooring line
breakage along with compensating for sudden jolting
and excess stretching of lines beyond parting strength.
The LineSaver also provides maximum protection
against the stress caused by wind, waves, and wakes.
• Absorbs dock line loads and increases dock line life
• NO tools needed to install.
• 3 sizes to match line diameter.
NEW Improved
Design!
Stock No.
Fit Line Size
#307
3/8"
#308
5/8"
#309
3/4"
Ready Cleat®
A portable instant cleat that is used as an insert to the rod holder,
when a fender is required for docking and no permanent cleat is available along the beam in the cockpit of a boat. ReadyCleat® is inserted
into any standard size rod holder, up to 9.5 " in depth, providing an
instant fender cleat ready for action. Made from high-impact glass fiber
reinforced Lexan to withstand the harsh marine environment.
Stock No.
#1084
Measurement
3 1/2" x 14 1/2"
An instant portable cleat
whenever one is needed!
BoatGuard® Mooring Whips
DESIGNED FOR:
• Fresh water use
• Low wake areas
• Non tidal regions
Taylor Made Products now provides a more economical way to protect
your boat in higher wake areas. Designed with the same tough standards
as our fixed base and our premium Mooring whips, these new whips
provide the “safety zone” between dock and boat for many types of
docking applications. Unlike the competition, Taylor uses a large (3/4")
diameter solid fiberglass pole that withstand rugged environments and
provide that Spring Action to keep your boat safely away from the dock.
CAD designed Whip Base is injection molded from high impact
reinforced plastic for incredible strength and durability. Sold as pairs and
include all lines and hardware to complete the installation.
Note: Some docking conditions may be too rugged for this product.
Specifically designed for boats
up to 25 ft and under 10,000 lbs
Base is injection molded from
high impact reinforced plastic
for incredible strength and
durability.
22
Stock No.
Description
For Boat Sizes by Weight
#99079
BoatGuard Mooring Whip 8’
UP to 2500 lbs.
#99080
Up to 5000 lbs.
#99081
Up to 10000 lbs.
Mooring Whips
23
Standard & Premium Mooring Whips
Mooring whips are a safe way to protect your boat against costly
dockside and seawall damage. The Mooring Whip system pulls
your boat a safe, convenient distance away from the dock
thereby protecting it from the damaging forces of waves, wind,
tides and wakes. Mooring Whips are made of high quality solid
fiberglass poles, aluminum-magnesium base units, tips, and
mooring whip lines. Each set comes
Tips allow your boat to return
to the dock effortlessly when
complete with all of the hardware
you want to board.
necessary for installation. Standard
Mooring Whips and Premium
Mooring Whips are sold in pairs.
The PWC Mooring Whip is a onepole system with a flush mount base &
is commonly used on swim platforms.
Standard Mooring Whips
DESIGNED FOR:
• Fresh or Salt water use
• Moderate wake areas
• Minimal tide areas
Premium Mooring Whips
Standard Mooring Whips are equipped with
o
fixed angle bases with a 60 angle and are most
commonly used for ski boats, runabouts, center
consoles, and bass boats.
For Boat Sizes Length/Weight
DESIGNED FOR:
• Salt water use
• Large tidal areas
• Ideal for Large Boats
Premium Mooring Whips are equipped with unique
rocker arm bases that return the whip poles to the
vertical position when not in use. These are ideal for
sailboats and larger, heavier or high profile boats.
Stock No.
Mooring Whip Description
MW.080
Fixed Angle Base 8’
Up to 20’ / to 2500 lbs.
PMW.1400
Rocker Arm Base 14’
Up to 33’ /to 20000 lbs.
MW.120
18’ to 23’ / 2500-5000 lbs.
PMW.1600
34’ to 46’ /20000-36000 lbs.
MW.140
24’ to 28’ /5000-10000 lbs.
PMW.1800
47’ to 56’ /36000- 48000 lbs.
MW.160
29’ to 33’ /10000- 20000 lbs.
Stock No.
Stock No.
Premium Whip Description
For Boat Sizes Length/Weight
Description (Personal Watercraft)
PWCMW.18 PWC Mooring Whip 18’
PWC up to 750 lbs.
Boat Mounted & Towing System Mooring Whips
Towing Whips are the very best answer when it comes to towing smaller craft behind a
larger vessel like a yacht, sailboat or houseboat. The Towing Whips take the guesswork out
of securing tenders, inflatables and PWCs.
The system consists of a stainless steel flush-mount base which is attached to the transom or
swim platform and holds the solid, flexible fiberglass whip with tip. A line at the whip’s end
connects to the towed vessel’s transom keeping it away from the larger vessel. Another line,
at the whip’s base, affixes to the front of the towed craft applying tension to the whip and
securing it at a safe distance from the tow boat.
Other Models
Each kit comes with everything you need for a complete installation:
• Two Stainless Steel flush mount bases.
• Two 1" diameter solid fiberglass whips with tips.
• Two whip cleats for line adjustment.
• All necessary hardware and lines.
• Complete installation instructions.
Boat mounted models are the same as the Tow models except
include 13/16" dia. solid fiberglass poles; for lighter duty
applications. Marina models are the same as the Tow models
except they include a single pole and base, and are primarily
used for temporary mooring under specific situations.
Stock No.
Description
#99082
Mooring Whip Marina (Model M-18) - used as third whip
#99083
Mooring Whip Marina (Model M-14) - used as third whip
#99084
Mooring Whip Tow System (Model T-36) - 2 poles
#99085
Mooring Whip Tow System (Model T-18) - 1 pole
#99086
Mooring Whip Boat Mount 16’ (Model B-160) - 2 poles
#99087
Mooring Whip Boat Mount 14’ (Model B-140) - 2 poles
#99088
Mooring Whip Boat Mount 8’ (Model JS-80) - 2 poles
23
Dock Pro™ Vinyl Dock Edging
Heavy Duty Double Molded Profiles
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability
and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion
against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or
nails. Available in our four most popular profiles and a full range of lengths.
Medium Edge Gard
Small Edge Gard
HD Double molded and Commercial Grade
Edgings are made from 85% recycled material
C-Shape Gard
White
Stock No.
Black
Stock No.
Description
White
Stock No.
Black
Stock No.
Description
White
Stock No.
Description
#46068
--
8' Straight
#46099
--
8' Straight
#46070
8' Straight
#46067
#46065
10' Straight
#46062
#46061
10' Straight
#46072
10' Coil Retail
#46057
--
10' Coil Retail
#46058
--
10' Coil Retail
#46056
10' Coil
#46086
#46066
10' Coil
#46096
#46091
10' Coil
#46053
16' Retail Pack
#46097
--
25' Coil
#46098
--
25' Coil
#46054
25' Coil
Commercial Grade Double Molded Profiles
Nails
Added to its line of heavy duty double molded PVC dock edging are (3) Commercial grade profiles. Dock builders,
marina’s and even a few larger boat owners asked for profiles with heavier wall sections to provide greater protection for their applications. Made from the same quality marine grade resins and with the same double molding
process as our existing products.
Stainless nails are 1 1/4"
#12 nails with ring shank.
Galvanized nails come with a
washer. (1/8 lb pks-12 per
strip)
Commercial Grade
Side Gard
Commercial Grade
P-Shape
#46031
Small 10' Straight- white
#46032
Large 10' Straight - white
10' Straight
#46020
Small 10' Straight - Black
#46018
10' Straight (Black)
#46019
Large 10' Straight - Black
#46013
10' Coil Retail
#46012
Small 10' Coil Retail
Stock No.
Description
#46030
90 Degree Vinyl Corner Bumper
The “Wave”
Made from the same tough PVC as our
dock extrusions, this 90 degree corner
(outside) will protect your boat from
this critical point. Inside structural ribs
provide the impact resistance you need
while it’s flush fit side sections give your
installation the “finished” appearance.
The 90 degree cut fits flush with the
Large Commercial P-Shape (above).
Inside dimensions cover 6” each side.
The “Wave” shape is 1/4" x 5" wide. This
profile is a heavy-duty PVC strip that is
designed to completely cover the sides of
your dock. Form this flexible extrusion
into a “wave” or loop shape and nail it
down. By doing so, you create a bumper
grid with superior shock absorbing and
protective ability. The “Wave” is available
in a 25 ft. coil and comes complete with
mounting nails. 25 ft. Coil will protect
approximately 18 ft. of dock space.
24
#46015
900 Corner 6"x6" White
Stock No.
Description
#46016
900 Corner 6"x6" Black
#46069
25' Coil
#96027
1/8 lb. stainless
#96028
1/8 lb #6 galvanized
#95999
1/2 lb. stainless
Dock Pro™ Vinyl Dock Edging
Traditional Vinyl P-Shape Gard
Traditional vinyl profiles are solidly molded from
vinyl especially formulated for softness and durability. Each piece installs easily to the edges of docks,
piers or floats with screws or nails. Available in a full
range of lengths.
Dock Pro
™
White
Stock No.
Description
#46092
8' Straight
#46071
10' Coil Retail
#46064
10' Coil
#46093
25' Coil
Heavy Duty Vinyl Dock Bumpers
Taylor Made now offers the ultimate in versatile, durable
docking protection! Dock Pro heavy-duty vinyl bumpers
are ideal for rough conditions, and can take a beating.
Made from U.V. resistant, marine-grade vinyl, they
provide excellent protection for your boat and dock.
Straight piece can be mounted horizontally, or the curved
back panel allows for vertical mounting on pilings. Corner
piece provides superior impact protection on dock corners.
Both bumpers have inflation valves for easy adjustment
to desired firmness. Pre-drilled for easy, permanent
mounting with plated fasteners.
Stock No.
Size
Description
#45500
37"L x 4.5"W x 6"H
Straight Mount
#45510
13.5"L x 6"W x 10.5"H
Corner Mount
™
Dock Pro Vinyl Dock Bumpers
Protects the side and top of the
dock with 1-1/4" cushion above
dock level. Made from the same
tough marine grade vinyl as our
fenders. Solid flaps attach easily to
any dock. Superior cushioning
protects boats and docks from each
other. Color is permanently molded into the vinyl and will not
transfer to the hull.
Stock No.
Color
Description
#46075
Black
Straight mount 18"
#46076
Black
Corner mount 10" x 10"
#46081
White
Corner mount 10" x 10"
#46082
White
Straight mount 18"
™
Dock Pro Inflatable Dock Wheels
Fleece Dock Wheel Covers
Smooth rolling wheels offer substantial dock cushioning and feature molded-in
valves to adjust the level of firmness. Heavy duty hot-dipped galvanized hardware
mounts securely to the dock. 12" and 18" wheels use a large 2" diameter axle housing for maximum strength.
Specifically designed to fit over our Dock Pro Inflatable
dock wheels. Constructed from 12 ounce Blizzard Fleece,
these 100% polyester dock wheel covers are available in
white only and come with reinforced hem with an
adjustable tie on opening for a snug fit.
NOTE: Brackets and wheels are not interchangeable. Replacement wheels
include cap and washer.
3 Year Warranty!
Wheel
Size
Corner
Mount
Stock No.
Straight Replacement
Mount
Wheel
Stock No. Stock No.
9"
#1078
#1079
12"
#1072
18"
#1081
Boat
Size
Stock No.
Wheel Size
#91078
Up to 20'
#9136
9"
#1073
#91072
20' to 30'
#9137
12"
#1082
#91082
30' to 40'
#9138
18"
25
Rubber Dock Products
Taylor Made Products offers a
line of EPDM rubber edging
for docks and piers. EPDM
rubber is designed to withstand
the harshest of environments,
and is soft enough to cushion
your boat from the dock or
pier. At 70 Durometer this new
premium line of dock edging
starts softer than vinyl, and
stays flexible when exposed to
UV, offering uncompromising
longevity.
“D” Profile
Double “D” Profile
A convenient way to protect
the edge of the dock. Not only
easy to install, but it also fits
snugly around the radius of the
dock corners.
Same great design as the
“D” profile, times two.
With a custom designed
notch in the back of this
edging, it can easily bend
around everything from
pilings to 90 degree dock
edges.
#96041
12' Length - Small
#96042
12' Length -Large
#96000
6' Length - Small
#96001
6' Length - Large
#96017
6' L Small Retail Pkg.
Stock No.
Description
#96018
6' L Large Retail Pkg.
#96036
12' Length
“P” Profile
Top-Side Profile
The “P” profile is
designed to attach to
the top of the dock and
wrap around to also
protect the side of the
dock. Two different
sizes to best suit all
applications.
This edging offers
protection for your
boat right where you
need it most. The
Top-Side profile not
only covers the side
of dock, but it also
protects the top as
well.
Heavy Duty
Side Profile
Specially designed
edging can be used
as side protection
for docks, or for
vertical protection
on pilings.
#96039
6' Length small
Stock No.
Description
#96040
6' Length large
#96038
#96037
6' Length
6' Length
Corner Guards
Chafe Guards
Made from the same great
rubber material as our dock
extrusion. Use with our dock
strips for complete protection.
Made from our strong, abrasion
resistant rubber. Slides through
chocks to protect your lines. Sold in
pairs.
Stock No.
Description
Stock No.
Description
#96013
for 1/2" – 5/8" lines
#96008
2-1/4" x 6" corner
#96014
for 3/4" line
#96009
3-1/2" x 6" corner
#96015
for 1" line
Fender Board Guards
Rubber Chair Tips
Attach these rubber cushions to
both ends of a 2" x 4" to give you
a padded fender board. Measures
6" long.
Non-marking rubber tips are great
for use on deck chairs, boarding
ladders, boat hooks, etc. Sold in
packages of 4 tips.
Stock No.
26
#96011
#96024
Fits 7/8" tubing
#96025
Fits 1" tubing
#96026
Fits 1-1/8" tubing
Perimeter® Dock & Post Bumpers
Dock & Post Bumpers
Available in multiple bumper profiles up to 50' in length
to fit your exact needs. Male/Female connection ends
available with volume orders.
• Will not deteriorate in the sun or mar your boat.
• Polyester textile cover and closed-cell foam inner cushion, NOT vinyl,
PVC or rubber.
• Cleans easily with liquid soap and a brush.
• Flexible tab (1" wide) system allows standard “Top-of-Dock” or unique
“Fold-Over” mounting which conceals the top row fasteners.
• Flexible enough to mount on curves or around corners.
Small Double Dock & Post Bumper
5 1/2" W x 1 1/4" D
Medium Double Dock & Post Bumper
8 " W x 1 3/4" D
Stock No.
Length
DDB2.30
3'
DDB3.30
3'
DDB2.40
4'
DDB3.40
4'
DDB2.60
6'
DDB3.60
6'
Stock No.
Length
DDB2.90
9'
DDB2.CU25
25'
DDB3.CU25
DDB2.CU50
50'
DDB3.CU50
50'
DDB2.CU
10-49'
DDB3.CU
10-49 '
Small Dock & Post Bumper
3 5/8" W x 1 1/4" D
“Top-of-Dock” installation method
DDB3.90
9'
25'
Medium Dock & Post Bumper
4 1/2" W x 1 3/4" D
“Fold-Over” installation method
Large Dock & Post Bumper
5 1/2" W x 2 1/4" D
Extra-Large Dock & Post Bumper
8" W x 3 1/4" D
Stock No.
Length
Stock No.
Length
Stock No.
Length
Stock No.
Length
DB2.30
3'
DB3.30
3'
DB4.30
3'
DB6.30
3'
DB2.40
4'
DB3.40
4'
DB4.40
4'
DB6.40
4'
DB2.60
6'
DB3.60
6'
DB4.60
6'
DB6.60
6'
DB2.90
9'
DB3.90
9'
DB4.90
9'
DB6.90
9'
25'
DB2.CU25
25'
DB3.CU25
25'
DB4.CU25
25'
DB6.CU25
DB2.CU50
50'
DB3.CU50
50'
DB4.CU50
50 '
DB6.CU50
50'
DB2.CU
10-49'
DB3.CU
10-49'
10-49'
DB6.CU
10-49'
DB4.CU
SMALL
3 5/8” W x 1 1/4” D
MEDIUM
4 1/2” W x 1 3/4” D
SMALL DOUBLE
5 1/2” W x 1 1/4” D
LARGE
5 1/2” W x 2 1/4” D
MEDIUM DOUBLE
8” W x 1 3/4” D
RECOMMENDED ATTACHMENTS –
To best install your Dock & Post Bumper, drive 1" stainless steel
pneumatic staples, 1.25 " stainless steel #8 or #10 oval or flat head
Phillips screws with stainless finishing washers, or 1.5" large-headed
stainless steel or aluminum nails through each tab every 3 to 4 inches.
EXTRA LARGE
8” W x 3 1/4” D
27
Perimeter® Dock & Post Bumpers
Super Edge Dock Bumpers
For larger Gunnel Guard applications such as work boats and launches or for superior protection for
your dock’s top edges. These bumpers are designed for heavy duty applications and include the same
great features as our Perimeter Dock Bumpers. Available in two sizes: Medium at 3" and large at 4"
diameter; in 3' , 4' , 6' and 9' lengths. Custom lengths available as special orders (per ft. pricing)
Stock No.
Corner Bumpers
Description
Length
Stock No.
Description
Length
SEDB4.30
Large Super Edge Bumper
3'
SEDB3.30
Medium Super Edge Bumper
3'
SEDB4.40
4'
SEDB3.40
4'
SEDB4.60
6'
SEDB3.60
6'
SEDB4.90
9'
SEDB3.90
9'
SEDB4.CU
Custom Length Bumper
10-94'
SEDB3.CU
Custom Length Bumper
Packaged Stainless Steel
Although most Perimeter Dock & Post bumpers are
flexible enough to mount around curves, our
customers have requested standard corner bumpers
to create a “finished”, “quality” look to the 90
degree outside corner of the dock. Our corner sections are designed to match up perfectly with our
medium, large and X-large Dock Bumpers and
extend 12" along each side of the dock from the
corner point. Mounting flanges are incorporated
both top and bottom for secure installation.
Cup Washers & Screws
Looking for the Best Method to install your
Perimeter Dock & Post Bumpers? Whether
your using the fold-over or Top of the Dock
installation methods, we recommend stainless
steel fasteners and finishing washers through
each tab, spaced every 3-4".
Stock No.
Stock No.
Description
Length
CB3.20
Medium Corner Bumper
3" x 12"L
CB4.20
Large Corner Bumper
4" x 12"L
CB6.20
X-Large Corner Bumper
6" x 12"L
10-49'
Description
SS8125
#8 SS 1.25" Long Phillips screw 100pk.
SSW8
#8 SS Finishing washers 100pk.
#96031
SS screw & washer 60pk.
(Blister packed, 12 per clip strip)
Removable Post Bumpers
Are you tired of cruising into a new port only to find that there is no protection on the pilings? Perimeter’s
Removable Post Bumpers are the solution that you’ve been looking for. Made out of the same high quality
materials as our Dock and Post Bumper, Perimeter Removable Post Bumper comes equipped with polyester
webbing (53" long) and a heavy-duty Derlin buckle system which allows for a quick, easy and secure installation.
Simply wrap the webbing around the piling, snap the buckle and pull tight. When you’re ready to depart, simply
unbuckle and stow away.
• Protect your boat at unfamiliar
Medium (4 1/2"wide)
or unprotected docks.
Removable Post Bumper
• Stays in place better than
Stock No.
Length
fenders.
RPB3.30
3'
• Great for temporary docking
RPB3.45
4 1/2'
or portable docks.
Large (5 3/4"wide)
Extra-Large (8 1/2"wide)
Stock No.
Length
Stock No.
Length
RPB4.30
3'
RPB6.30
3'
RPB4.45
4 1/2'
Boat Guide Bumper
• Guides your boat onto its lift without
damaging the boat.
Available to fit on 7/8"
and 1 3/4" diameter pipes.
• Polyester cover protects your boat and
the foam from the sun.
Stock No.
Pipe Size
Length
BGB4.1
7/8" Dia.
4" x 27"
BGB4.2
1 3/4" Dia.
4" x 27"
• Holds up in the toughest of marine
environments.
28
Perimeter® Gunnel & Chafe Guards
Gunnel Guard
Flexible cushion and tabs allow for easy attachment with
screws and washers. Larger sizes commonly used for work
boats, launches and other heavy-duty applications. Sold
by the foot or in 50' self dispensing display boxes.
RECOMMENDED ATTACHMENTS – To best install
your Gunnel Guard, drive self-tapping (or self-drilling
for fiberglass) 1/2" stainless steel #6 Phillips screws with
stainless finishing washers through each tab every 3 to 4 inches.
Stock No.
Half-Round
Gunnel Guard
3/4-Round
Gunnel
Guard
•
•
•
•
Polyester covered, not cotton canvas.
Wears over 10 times longer than similar products.
Will not rot in the sun or mar your boat.
Perfect for Whalers, dinghies, swim steps . . .
H alf-Round
Gunnel Guard
Diameter
GG1.253Q.50
Gunnel Guard 3/4-Round
1 1/4"
5/8"
50'
GG1.253Q.CU
1 1/4"
5/8"
<50'
GG1.5HR.10
1 1/2"
5/8"
10'
GG1.5HR.20
1 1/2"
5/8"
20'
GG1.5HR.50
Gunnel Guard Half-Round
1 1/2"
5/8"
50'
GG1.5HR.CU
Gunnel Guard Half-Round
1 1/2"
5/8"
<50'
GG1.53Q.10
1 1/2"
3/4"
10'
GG1.53Q.20
1 1/2"
3/4"
20'
GG1.53Q.50
GG1.53Q.CU
GG2.03Q.50
GG2.03Q.CU
GG3.03Q.50
GG3.03Q.CU
GG4.03Q.50
GG4.03Q.CU
Tab Size
1 1/2"
3/4"
1 1/2"
2"
2"
3"
3"
4"
4"
Length
50'
3/4"
<50'
3/4"
50'
3/4"
<50'
3/4"
50'
3/4"
<50'
1 1/2"
50'
1 1/2"
<50'
3/4 -Round Gunnel Guard
Drawings not to scale.
1 1/4” dia.
Description
1 1/2” dia.
2” dia.
4” dia.
3” dia.
1 1/2” dia.
Chafe Guard
Superior abrasion resistance. Standard sizes sold in pairs
with UV-resistant ties to secure installation.
•
•
•
•
Prevent wear and tear on your mooring and dock lines.
Don’t lose your boat in a storm due to lack of a chafe guard!
Easily fits through chocks, will not split or rot in the sun.
Polyester textile, NOT pvc, vinyl or rubber.
Removable Chafe Guard
Stock No.
Fits Line Size
Length
CG58.18 (Pr.)
3/8" x 5/8"
CG58.48 (Pr.)
3/8" x 5/8"
18"
4'
CG58.100
3/8" x 5/8"
100'
CG1.18 (Pr.)
3/4" x 1"
18"
CG1.48 (Pr.)
3/4" x 1"
4'
CG1.100
3/4" x 1"
100'
CG125.18 (Pr.)
1 1/4"
CG125.48 (Pr.)
1 1/4"
18"
4'
CG125.BU
1 1/4"
Bulk
Allows for easy adjustment regardless of the application.
Removable Chafe Guards are sold individually.
Stock No.
• Ideal for anchor lines, power cords and pre-spliced eyes.
• Polyester hook & loop fasteners provides easy and secure
installation.
• When you can’t use a permanent installation.
Fits Line Size
Length
RCG58.14
3/8" x 5/8"
16"
RCG1.14
3/4" x 1"
16"
1 1/4"
16"
RCG125.14
29
Sailing Products
Perimeter® Lifeline Cushions
Inner cushion provides a comfortable, yet sturdy backrest.
Simply thread your lifeline through the center of these
polyester-covered
foam cushions. Blue lifeline cushions
®
use a Sunbrella cover which will match your sail covers.
•
•
•
•
Make your lifelines a better backrest.
Polyester covered, not bare foam!
Won’t discolor, fade or rot in the sun
Cleans easily with liquid soap.
Stock No.
Description
LC150.30
Lifeline Cushion (Pr.)
Length
3'
LC150.45
4.5'
LC150.60
6'
LC150.30BU
Blue Lifeline Cushion (Pr.)
3'
LC150.45BU
4.5'
LC150.60BU
6'
Sailboat Covers
Stock No.
Description
#68026
VanGuard Flying Jr./ COVERS MAST
#68027
VanGuard Flying Jr./ NO MAST
#68028
VanGuard Laser 12/ NO MAST
#68029
VanGuard Pico/ NO MAST
#68030
Sunfish/ NO MAST
#68031
Sunfish/ COVERS MAST
#68060
505 Mooring-Storage Cover/ OVER MAST
#68061
505 Mooring-Storage/ BTM COVER
#68062
VanGuard 15 Mooring-Storage/ W/MAST
#68063
VanGuard 15 Mooring-Storage/BTM COVER
#68065
VanGuard Laser Mooring-Storage/BTM COVER
#68068
Optimus Pram Mooring-Storage Cover
#68069
Optimus Pram Mooring-Storage/BTM COVER
#68093
505 Mooring-Storage Cover/ NO MAST
#68099
VanGuard 15 Mooring-Storage/ NO MAST
To order your Taylor Made sailboat cover, use the stock number
with the letters “OB” for blue
and “OG” for gray as the suffix.
Our selection of sail boat covers offer many styles
to accommodate multiple uses; covering hulls
and mast up/mast down options. Constructed
from our Hot Shot™ fabric for a cover that is both
lightweight yet strong enough for trailering.
Pacific Blue and
Gray Hot Shot™
Colors only!
• “No Mast” - The cover does not accommodate the mast at all (example:
mast off the boat)
• “Over Mast” or “Covers Mast” - The cover accommodates the mast
laying down on the boat - not in the use position.
• “W/Mast” - The cover accommodates the mast up in the use position,
with fabric boot which velcros around the base of the mast.
• “BTM COVER” - The cover covers the bottom of the hull while
trailering. The cover comes up over the gunnel, over the top edge.
Rubber Spreader Boots
Perimeter® Spreader Boots
Foam inner cushion provides extra protection for your sails. Available in
sizes to fit all spreaders. Sold in pairs.
• Protect sails from chafing or tearing on
spreaders!
• Fit better than other products on the market.
• Delrin buckle system makes installation
quick, simple and secure.
30
Stock No.
Desc.
SB58.58
Small
SB1.1
Medium
SB15.1
Large
SB25.1
X-Large
Boat Size
< 25'
Spreader Size
1" Dia.
• Fits quickly and easily over the stay and spreader end.
• Constructed from soft yet tough white synthetic rubber.
• Protects the rigging connections
• Eliminates clumsy, temporary taping.
• Reduces drag
• Reduces sail chafing and tearing
• Molded in split form
• Sold in pairs
Stock No. Desc.
25 - 35'
>1 1/2" Dia.
#960025
> 35'
> 2 1/2" x 1" Oval
#960026
#960027
> 50'
> 3" x 1" Oval
Small
Measurements Spreader Insert Size
4 5/8" x 2"
1/2" - 1 1/2"
Medium
5 3/4" x 2 3/8"
1" - 2"
Large
7 1/2" x 2 7/8"
2" - 3"
Dock Products
Bazooka Bailer™
The only combination boathook/bailer/power washer on the market today, this
is truly a unique product.
As a boat hook, this product is one of the most durable boat hooks you will
ever own. From it's hook to it's anodized aluminum shaft only quality parts and
materials are used in this product's construction. The telescopic pole collapses
nearly in half for storage and automatically locks firmly in place when fully
extended. Two non-slip grips ensure a solid hold when fending off from other boats
or hauling in a mooring.
As a bailer the 8’ model drains nearly a quart per stroke, and reaches into
spaces few bailers can. Simply place the hook under water and extend the Bazooka
Bailer. The piston draws the water up a small hole located at the end of the hook.
Don't worry about the oil and scum found in the bottom of most bilges, unlike
some rubber washers the nitrile piston is not broken down by such substances,
instead they serve as a healthy dose of lubrication.
Automatic locking system
is safer than the typical
twist lock. It is made
to last in salt water.
Finally, as a power washer, water is expelled from the Bazooka Bailer approximately thirty six times faster than it's operating speed, giving it a firing range of
over 50 feet and the power to clean. The Bazooka Bailer is a handy product when
cleaning hulls, cleaning decks or when you find yourself in a water fight!
• Boat Hook • Bailer
• Power Washer
all in one!
3/4” Acme thread
attaches easily to
many accessories.
• Bazooka Bailer can get into hard to reach areas.
• Bail out your boat from the dock or your boat without
getting on your knees.
• Shoots over 50 feet, allows you to clean anchor lines,
decks or other hard to reach areas in just seconds.
• Made to withstand saltwater
and bilge oil.
U.S. patent #6,055,762 licensed
from Bridgenorth Bailer
Stock No.
Description
#18548
5 ft. Bailer (extended)
#18549
8 ft. Bailer (extended)
#200025
Bailer Floor Merchandiser (4 of ea.)
Seamless, UV-resistant black polyethylene shell filled with EPS foam. The tough outer shell
resists impacts and protects the foam core from saltwater, gasoline and most chemicals. Thick
mounting flange can be drilled to accommodate attachment fasteners for easy mounting to
any dock design. Constructed with ventilation holes that let air in and keep water out.
NOTE: Not designed to attach to each other.
Dock Floats
8 Year
Flotation
Warranty
Cross section
shows EPS foam
core, and 1/8"
wall thickness.
Stock No.
Description
Approx. Flotation (lbs.)
#46116
24" x 48" x 12" H
450
#46117
24" x 48" x 16" H
600
#46118
24" x 36" x 12" H
335
Minimum Recommended
Mounting Hardware:
• 3/8” x 3” lg. lag screw
• 3/8” washer & 5/8” washer
American National Standard
Type A plain washers (series W)
Made from 50% recycled polyethylene
31
Dock Products
StepSafe™ Dock Hand Rail
• The Dock Hand Rail can be mounted to any dock to aid in boarding and
unboarding your boat.
• Made from rust proof extruded aluminum, with a bright dip anodized finish.
• Features an etched top surface to ensure a solid grip.
• Large solid mounting plates are drilled for half inch bolts.
• Sized to perfectly fit 6 inch wide dock boards
Stock No. #47302
Board your Boat
with Confidence!
StepSafe™ Dock Steps
Molded in durable U.V. resistant Polyethylene, our dock steps are offered in three different tread step models. On the top of each step, Taylor Made
Products own StepSafe™ non-slip pad is adhered for additional slip protection while boarding. 1 1/2" wide flange provides adequate mounting
surface for docks. Cleans easily with soap and water. Additional hand rails are available for two and three step models, sold separately. Maximum
weight up to 300 lbs.
Stock No.
Description
Size (Length x Wide x Height)
#47100
Single Tread Step
#47200
Double Tread Step
26.75"L x 23.75"W x 17"H
#47201
Aluminum Hand Railing (double step model)
19.5"W x 49"H
#47300
Triple Tread Step
35"L x 25"W x 25.5"H
#47301
Aluminum Hand Railing (triple step model)
26"W x 58"H
22"L x 18"W x 11.5"H
StepSafe™
Step with Comfort & Safety . . .Wet or Dry!
StepSafe™ will retain its grip wet or dry, and is resistant to gas, oil, and UV
rays, We’ve combined Toughtek™ with a soft padded feature for a safe, secure
climb aboard. Also great for the pool area, aluminum ladders, or any surface
where slipping is a concern. Comes with a pressure sensitive backing for easy
installation, and trims easily with scissors to almost any size and shape. Use
on gunnels, swim platforms, stair rungs, transoms or anywhere you step and
could slip!
32
Stock No.
Cut Size
#11990
3 1/2" x 14 1/2"
12 Pack master comes pre-packed
clipped on a clip strip.
Dock Products
Post Bumpers
Post bumpers are great protection for pipe supported type docks. Protects the boat from contact with the metal
dock pipe and hardware at dock level. Easily slides over 1 1/2" dock pipe and rests securely against the dock.
Molded from marine grade vinyl with an inflation valve to adjust firmness. Bumper measures 7" dia. x 17" long.
White
Stock No.
Blue
Stock No.
#45600
#45604
Navy
Stock No.
Black
Stock No.
#45607
#45652
Cranberry Hunter Green Sand
Stock No. Stock No. Stock No.
#45653
#45657
Dock Pro™ Dock Cart
#45660
1060
Curved handle design reduces bending-over, making the Dock Pro dock
cart easier to handle than conventional carts, while the unique angled
tub feature provides better leg clearance for maneuvering. The Dock Pro
dock cart is simply the easiest way to carry all your gear from the car to
the boat. Features a spacious 7 cu. ft. (47"L x 23"W x 13"D) heavy wall
roto-molded poly-tub that will not rust or rot. Zinc coated corrosion
resistant hardware used throughout. Plastic rim wheels with roller bearings will stand up to the harshest marine environment.
Stock No.
Weight Capacity
Wheel Size
Wheel Type
#1060
300 lbs.
20"
Solid
#1070
300 lbs.
20"
Pneumatic (inflatable)
1070
Made from 50% recycled polyethylene
Piling Caps
Made from heavy duty polypropylene, these piling caps
will discourage birds from sitting on top of your pilings.
Available in 5 diameters to best fit your needs.
Stock No.
#6200
Stock No. Color
Dia.
Color
Dia.
White
7"
#6205
Black
7"
8"
#6206
Black
8"
#6201
White
#6202
White
9"
#6207
Black
9"
#6203
White
10"
#6208
Black
10"
#6204
White
11"
#6209
Black
11"
#6210
White
12"
#6211
Black
12"
Dock Cushions
White polyethylene foam provides superior cushioning from impact. UV protected foam material is
maintenance free and non-marring. Designed for both horizontal and vertical applications, dock cushions are
pre-drilled and permanently mount with plated fasteners (included).
Bends Without
Breaking!
Stock No.
Size
#46077
4" x 6" x 48"
#46055
Retail Package
33
Stow ‘n Go™ Fiberglass Dock Boxes
With a UV gelcoat finish and the stainless steel lockable latch and hardware these fiberglass dock boxes are built tough. Our dock boxes incorporate gas shock lifts, which come standard on all models. These shocks help
to keep your lid open on rocking docks and in higher wind areas and allow
for a slower, more controlled closing. These fiberglass molded dock boxes
are also constructed with a smooth interior finish which helps prevent
splinters in your hands when storing or retrieving your boating accessories.
Standard Dock Boxes
Provides a large rectangular space in which to store all
your boating needs. (2 shocks installed)
Stock No.
Description
Height
Width
Depth
#83562
Small
24"
54"
22"
#83552
Medium
24"
72"
23"
Top-Seat Dock Boxes
#83551
Large
24"
85"
22"
Seat built in to lid for added function.
#83559
Extra Large
24"
95"
22"
Stock No.
Description
#83553
Deep Small
27"
46"
26"
#83556
#83554
Deep Medium
27"
72"
27"
#83555
Low-Profile Dock Boxes
Description
Height
Width
Width
Depth
Small
27"
46"
26"
Large
29"
72"
29"
Gas shocks come standard
on all models.
Triangle Dock Boxes
Built for large boats or docks. (1 shock installed)
Stock No.
Height
Depth
Fits snugly in that little gusset found on most docks.
#83550
Small
20"
40"
19"
Stock No.
Description
#83557
Medium
18"
48"
20"
#83561
Triangle
Height
Width
Depth
27"
54"
33"
Heavy duty stainless steel
lockable latch and hinges
Fishermen’s Dock Box
New to our line of dock boxes comes the ideal fishermen’s
storage dock box. This box has all the features and benefits of
our standard fiberglass dock boxes with the addition of rod
holders installed on the underside of the lid. This added
feature is a great way to keep your fishing poles stored and
easily out of the way of all your other boating gear. Easily
accommodates poles up to 7’ long.
Stock No.
Description
Height
Width
Depth
#83560
Extra Large
24"
95"
22"
Stow ‘n Go
Dock Boxes
Other Dock
Box Brands
Smooth interior surface is easy to clean.
No scrubbing in hard
to reach spots where
dirt and algae like to
hide.
Dirt and grime can
collect in the pores of
th e rough interior
surface making cleaning a difficult task.
Smooth interior surface has no stray glass
fibers that may splinter and become a source
for cuts or slivers.
Standard
Dock
Boxes
Rough surface has many stray glass fibers that
can splinter and become a source of cuts and
slivers.
Low
Profile
Box
Cross Section of Top-Seat Dock Box
34
Solid wood core is stronger than cardboard
and contains no trapped air making it more
resistant to absorbing water and odors.
Flimsy cardboard core is filled with air
pockets that can absorb water and nasty
odors.
Stow ‘n Go Dock Boxes
Other Dock Box Brands
Double glass layer resists
cracking and adds strength in
critical areas where hardware
is attached.
Single glass layer provides
minimal strength and may
develop stress cracks over
time.
Triangle
Dock Box
Top-Seat
Dock Box
Stow ‘n Go™ Dock Box Accessories
Replacement Gas Shocks
Standard Gas Shocks
Stainless Steel Gas Shocks
These reliable gas shocks
incorporate a strong annealed
steel rod with a special coating
for added corrosion resistance.
These shocks are an ideal
choice when used near or
around high salt water areas
where corrosion is a large
factor.
These shocks are constructed from highly corrosion
resistant 316 stainless steel which make them the best
selection for use in the harshest marine environments.
Stock No.
Length x P1*
Forces Available
Stock No.
Length x P1*
Forces Available
#1844
7.5" x 20 lbs.
#1851
15" x 60 lbs.
#1845
7.5" x 40 lbs.
#1852
20" x 20 lbs.
#1846
10" x 20 lbs.
#1853
20" x 40 lbs.
#1848
10" x 40 lbs.
#1854
20" x 60 lbs.
#1849
15" x 20 lbs.
#1855
20" x 90 lbs.
#1850
15" x 40 lbs.
#1856
20" x 120 lbs.
Stock No.
Length x P1*
Forces Available
Stock No.
Length x P1*
Forces Available
#1863
7.5" x 20 lbs.
#1831
17" x 30 lbs.
#1864
7.5" x 40 lbs.
#1832
17" x 40 lbs.
Mounting Hardware
#1822
10" x 20 lbs.
#1833
17" x 60 lbs.
Stock No.
#1823
10" x 40 lbs.
#1834
17" x 90 lbs.
#1857
2.25" Flat Mounting Bracket
#1824
12" x 20 lbs.
#1835
20" x 20 lbs.
#1858
2.25" Stainless Steel Flat Mounting Bracket
#1825
12" x 30 lbs.
#1836
20" x 30 lbs.
#1859
2" Stainless Steel Angled Mounting Bracket (5 holes)
#1826
15" x 20 lbs.
#1837
20" x 40 lbs.
#1860
2" x 1.25" Angled Mounting Bracket
#1827
15" x 30 lbs.
#1838
20" x 60 lbs.
#1861
2" x 1.25" Stainless Steel Angled Mounting Bracket
#1828
15" x 40 lbs.
#1839
20" x 80 lbs.
#1865
10mm Ball Stud
#1829
15" x 60 lbs.
#1840
20" x 90 lbs.
#1830
17" x 20 lbs.
#1843
20" x 120 lbs.
Description (sold in pairs)
* The P1 force is the lbs of force exerted when the gas spring is in the fully open
or extended position.
Stow ‘n Go™ Dock Box Accessories
Dock Box Storage Nets
Dock Box Trays
Available in two sizes to fit most dock boxes, these
strong polyester nets mount easily on the underside
of the dock box lids. Keeps lines, electrical cords,
fenders, almost anything neatly organized and up off
the bottom of the box. Complete with screw in type
snap fasteners. Measure the reinforced area on your
box lid to determine proper size.
All trays are 12"
wide x 6" deep
and fit depth of
the box recommended.
Stock No.
Keep your Boating
Gear Neatly Stowed Away!
Size/Description
#553
13" x 52" longer, narrow boxes
#554
18" x 38" shorter, wider styles
Stock No.
Description
Fits Models
#83600
Tray (small)
83552
#83605
Tray (large)
83553, 83556
Dock Box Seat Cushion
Available in two sizes to fit Taylor Made Seat-Top
dock boxes (Stock# 83556 & 83555). These
cushions feature 2" thick urethane foam that won’t
absorb water and covered in our Ultima™ fabric for
the best performance in strength, UV stability and
longevity. The underside of the cushion has a
non-slip fabric sewn-in to help keep it in place.
Available in Pacific Blue.
Non-Slip
Bottom!
Stock No.
Size/Description
#555
53"L x 18"W - fits Box #83555
#556
27"L x 16"W - fits Box #83556
Pneumatic Lid Lifts
#83610
1 Pair
Fits Models
All Models - except
#83560, uses (2) #1829 above
35
Oil-Free D-Icer™ & Accessories
Why Choose Our Oil-Free D-Icer?
The innovative motor design, high-efficiency, and extra features leave the competition behind. A superior product that costs no more than the
competition. It is a powerful submersible motor-driven water circulation unit that prevents ice formation during winter months by continuously
propelling warmer subsurface water up to the surface. The D-Icer keeps the area ice-free. It's ideal for use around a boat or dock.
Unique Design
The unique one-piece design of the shroud prevents large debris from being sucked through and damaging
the propeller, a major cause of failure in other ice prevention devices. Optional thermostat control is
available, as well as an optional flotation collar to hold the D-Icer near the surface for aerating.
2 Year
Warranty!
Product Features:
•
•
•
•
•
•
•
•
NEW Oil-Free Design - no chance of oil leaks polluting our environment.
More Energy Efficient than Oil-Filled Units - costs less to operate. Pays for itself.
Molded Glass Filled Nylon Shroud - guides water flow, and blocks debris.
Stainless Steel Motor Shaft and Motor Housing - eliminates corrosion.
Dual Internal Seals and Double Lip Shaft Seal - keep water and dirt out for long life.
High Efficiency Motor and High Performance Propeller - give the most flow for your energy dollars.
Continuous Duty 120v or 230v Single Phase Motors - can run non-stop for years without maintenance.
Standard 50' or 100' Field Replaceable Power Cords - get you to the middle of the slip without
modification.
• Designed for Harsh Saltwater Environment with Renewable
Zinc Anode for Corrosion Protection - thrives in salt or mineral
filled water.
• Easy to Install by One Person - fast setup allows use as a
portable unit.
115w/60Hz D-Icer Models
Stock No.
Description
#6205D
1/2 HP w/50' Oil-Resistant Power Cord
#6205D-100
#6208D
#6208D-100
#6210D
1 HP w/50' Oil-Resistant Power Cord
#6210D-100
1 HP w/100' Oil-Resistant Power Cord
230v/50Hz D-Icer European Models
Stock No.
Description
Stock No.
Description
#6228D
1/2 HP, without plug
#6230D
1 HP, without plug
#6228D-EU
1/2 HP, w/European plug
#6230D-EU
1 HP, w/European plug
#6228D-UK
1/2 HP, w/UK plug
#6230D-UK
1 HP, w/UK plug
#6229D
3/4 HP, without plug
#6231D
2 HP, without plug
#6229D-EU
3/4 HP, w/European plug
#6231D-EU
2 HPr, w/European plug
#6229D-UK
3/4 HP, w/UK plug
#6231D-UK
2 HPr, w/UK plug
Oil-Free design is more
environmentally friendly and
energy efficient than the
competitors Oil-Filled units!
D-Icer™ Accessories
36
Stock No.
Description
#6215
Thermostat Control, 25 Degree On/35 Degree Off
#6216
Thermostat Control, 30 Degree On/40 Degree Off
#41896P
Replacement Zinc Anode
#A-24417-P
Replacement Propeller 1/2 HP
#A-24417-12
Replacement Propeller 3/4 HP
#A-24417-13
Replacement Propeller 1 HP
#6225D
Dock Mounting Kit
#6226
1/2 - 1 HP Heavy-Duty Black Poly-Pro Float-Converts to Aerator
#6230
2 HP Black Poly-Pro Float - Converts to Aerator
Poly-Pro Float
Zinc Anode
Replacement
Propeller
Thermostat Control
Dock Mounting Kit
Taylorbrite® Lighting
The Single and Double Linear Surface Mount
CCFs are terrific lights that not only look
good, but have a wide variety of features and
benefits conducive for users in the marine, RV,
and truck markets. Furthermore, they are
durable enough to hold up under shock and
vibration, as well as other environmental
elements causing corrosion.
CCF Linear Lights
Direct benefits of using Taylorbrite CCF Marine and RV Lights:
• CCF lights draw very little power for the light they deliver.
• CCF lights operate at a much lower fixture temperature.
• CCF lights provide up to 25,000 hours of service life and unlimited starts.
• Very durable due to their heavy duty electrode construction. They hold up under
shock and vibration typically experienced in commercial and recreational
marine environments.
• Energy saving dimming capability is incorporated into the CCF lights.
Surface Mount Single Linear Specifications
Dimensions:
Weight:
Power Consumption:
Input Voltage/Current Draw:
Color Temperature:
Illumination:
Lifetime:
Switch Options:
Single linear, Diffused Lens, Chrome Bezel
Available in Gold,
White, Chrome and
Brass bezel options
Single linear, Chrome, Cross-Sectional View
19.39” x .884” x 4.027”
2 lbs. 1 oz.
7.5 Watts
625A@12 VDC .313A@24 VDC
3000k
169 Lux @ 3 ft.
25,000 hours
Switched/Non-Switched (check availability)
Double linear, TIR Lens, Gold Bezel
Surface Mount Double Linear Specifications
Dimensions:
Weight:
Power Consumption:
Color Temperature:
Illumination:
Lifetime:
Switch Options:
19.39” x .884” x 6.206”
2 lbs. 15 oz.
15.5 Watts
1.25A@12 VDC 0.625A@24 VDC
3000k
324 lux @ 3 ft.
25,000 hours
Switched/Non-Switched (check availability)
Double linear, Red Lens, White Bezel
Lens Options:
TIR - Total Internal Reflection
TIR Clear
TIR Red
Diffused
NOTE: Taylorbrite dimming
system compatible.
CCF Reading Lights
Taylorbrite reading lights offer elegant styling and very low
heat output, making them perfect for cabins or living areas
where style and functionality are essential.
Specifications
Dimensions:
Weight:
Power Consumption:
Color Temperature:
Lifetime:
Euro: 2.5” outer diameter/5” high
Futura: 2.5” outer diameter/6” high
Euro: 13.0 oz.
Futura: 15.2 oz.
6.6 Watts
.550A@12 VDC .275A@24 VDC
3000k
25,000 hours
CCF Euro
Reading Light
CCF Futura
Reading Light
NOTE:
All reading lights have diffused
lenses and come with a switch.
37
LED Linear Lights
These rectangular surface mount cabin lights add efficient bright white illumination
aboard your boat with long service life and very low power draw. They operate through a
range of inputs from 9-32 volts DC, covering both 12V and 24V systems with one version
and maintaining constant light output over the entire operating range.
LED Lights are more energy efficient than traditional lighting
NOTE: Taylorbrite
dimming system
compatible.
Specifications:
Dimensions:
Weight:
Power Consumption:
Color Temperature:
Lifetime:
Switch Options:
Bezel Options:
Lens Options:
Single - 20”Lx4”Wx1”D
Dual - 20”Lx6”Wx1”D
13.0 oz.
Single - 7.5 Watts
Dual - 15 Watts
Single: 8-32V, 0.63A @ 12V DC Dual: 8-32V, 1.25A @ 12V DC
3800k
50,000 hours
Stock No.
Description
Switch included on bezel
I7TM001W
Single, white, 7.5 watts, 9-32 volts
Injection molded plastic
I8TMM01W Dual, white, 15 watts, 9-32 volts
Frosted
LED Reading Lights
LED Futura
Reading Light
Taylorbrite LED Reading Lights feature cool operating
temperatures, long life, and very low power draw. Their warm
white color temperature is easy on the eyes and are fully
dimmable with Taylorbrite Dimmers. They are five times
brighter and draw 77% less power than CCF reading lamps.
LED Euro
Reading Light
Specifications:
Dimensions:
Weight:
Power Consumption:
Color Temperature:
Lifetime:
Switch Options:
Bezel Options:
Lens Options:
2.5” outer diameter / 5” high
13.0 oz.
1.5 Watts
9-32 volts, 0.125 amps@12 VDC
3800k
50,000 hours
Built in
• Brass • Brushed Nickel
Frosted
NOTE: All reading lights
have frosted lenses and
come with a switch built in.
Stock No.
R3DM001B
Euro LED Reading Light, Brass, 9-32V
R3DM001N
Euro LED Reading Light, Brushed Nickel, 9-32V
R4DM001B
Futura LED Reading Light, Brass, 9-32V
R4DM001N
Futura LED Reading Light, Brushed Nickel, 9-32V
LED Stick-On Pushlight
This small LED light is powered by three AAA batteries (included) and
has an adhesive backing so it can be placed anywhere. Just push the lens
to turn the light on and off. Three super bright LEDs run for days on three
batteries.
Stock No.
Description
LSPW
LED Stick-On Pushlight, white
LSPWD
LED Stick-On Pushlight, 10 pack table top display
Description
Add a little bit of light
where ever you need it!
Specifications
Dimensions:
Weight:
Switch:
Color:
Lens:
Power:
2.5” dia., 0.875” deep
2 ounces
Built into lens
White
Clear
Three (3) AAA Batteries (included)
Solar LED Dock Lights
Solar powered dock light can be easily attached to any flat
surface with two 1/4" screws. The light charges during the
daytime and automatically turns on at dusk. Features 4
super bright white LEDs, with a clear plastic housing that
offers 360 degree illumination.
Stock No. #46109
38
Waterproof & Shock
Resistant!
1 1/2"
Height
5" diameter
Classic Fluorescent Lights
Classic Light:
Taylor Made Classic fluorescent lights offer low power draw, high light output, and low cost.
Additionally, fluorescent light run much cooler and are 3 times more efficient than halogen
bulbs. Standard fluorescent bulbs included.
Classic White Fluorescent 16W
Classic Wood Grain Light:
The wood grain accent helps preserve the look of your boat when directly replacing older
lights. Standard fluorescent bulbs included.
Classic Red/White Fluorescent 30W
Fluorescent Lights feature:
• Corrosion resistant aluminum housing and opaque acrylic lenses.
• Lights run on 12 volt DC and only consume 16 (1.3 amps) to 30 (2.5 amps) watts of power.
• Lights are UL approved and meet IEC 60945 (marine conducted and radiated emissions
standard), meaning they will not interfere with your boat’s on-board electronics.
Classic White Fluorescent 30W
CLASSIC
Stock No.
Description
Volts
Watts
Lens
Dimensions LxWxH
EF16WW
Fluorescent,16W,White
12
16
White
16”Lx5.5”Wx1”H
EF16RW
Fluorescent,16W,Red/White
12
8
Red/White
16”Lx5.5”Wx1”H
EF30WW
12
30
White
22”Lx6”Wx1.5”H
EF30RW
12
15
Red/White
22”Lx6”Wx1.5”H
Wood Grain White Fluorescent 16W
CLASSIC WOOD GRAIN
Stock No.
WEF16WW
WEF16RW
WEF30WW
WEF30RW
Volts
Watts
Lens
Dimensions LxWxH
Description
12
16
White
16”Lx5.5”Wx1”H
12
8
Red/White
16”Lx5.5”Wx1”H
12
30
White
22”Lx6”Wx1.5”H
12
15
Red/White
22”Lx6”Wx1.5”H
Wood Grain White Fluorescent 30W
REPLACEMENT BULB
Stock No.
Description
Volts
Watts
Lens
Dimensions LxWxH
RB8W
Red Bulb, 8 watt
12
8
Red
18”Lx1”Wx1”H
RB15W
Red Bulb, 15 watt
12
15
White
12”Lx1”Wx1”H
WB8W
White Bulb, 8 watt
12
8
Red
18”Lx1”Wx1”H
WB15W
White Bulb, 15 watt
12
15
White
12”Lx1”Wx1”H
Wood Grain Red/White Fluorescent 30W
Cross-Sectional View
Dimming System
Taylorbrite’s dimming system uses a technology known as Pulse Group
Modulation. The true benefit of this system is the ability to dim
efficiently, without generating heat. Furthermore, dimming does not
impede the life of the electrode, nor does it create RFI. Because a
“signal” is sent from the dimmer that alters the frequency of the light’s
sine wave, power draw of the CCF lights is reduced in proportion to the
light output. This is ideal for maintaining battery capacity at night,
when full brightness is not necessary, but a slight amount of light may
be desired.
LED Replacement Bulbs
• Direct replacement of your high power draw, dangerously
hot halogen bulbs.
Slim CCF
Dimmers
Dimensions (inches)
Stock No.
Style (Slim Bezel)
Depth
Width
Height
ADD10SMB
Gold, 12-24V
1.5
1.563
3.125
ADD10SMC
Chrome, 12-24V
1.5
1.563
3.125
ADD10SMW
White, 12-24V
1.563
3.125
1.5
Stock No. LED Replacement Bulb
Fits Models
LHR11
Warm white, 15LED
MR11/G4
LHR16
Warm white, 21LED
MR16
• LED replacement bulbs offer warm white color temperature,
very little heat output, and very low power draw.
• Replacement bulbs will last the life of your boat, guaranteed!
• By just replacing the bulbs, you gain the benefits of LEDs
without the added cost of a new light fixture.
39
BoatGuard® Boat Covers
This cover is the perfect blend of economy
and simplicity. Designed to fit most common
hull styles and sizes, the BoatGuard
Rainbreaker is ideal for most mooring and
storage applications. The Rainbreaker is
made from Legacy™ fabric that is both mildew
resistant and water repellent. Includes a handy
storage bag for the cover when not in use.
Max.
Beam Width
All BoatGuard Rainbreaker covers feature:
Length/Description
Pattern No.
to 75"
12' to 14' Aluminum Fishing
#70281
to 75"
#70282
to 90"
14' to 16' V-Hull Runabout Bow Rider
#70283
to 96"
16' to 19' Fish ‘n Ski
#70284
to 102"
#70285
to 102"
#70286
• 3.2 oz. pigment coated polyester fabric
• Gray Color
• Mooring and storing only
• Includes storage bag and tie-down rope
• One year warranty
*As with any boat cover, a support pole should be used to allow
water to run off.
BoatGuard®
BoatGuard® boat covers are America’s best selling
universal-fit trailerable boat covers. Strong
enough to be trailered, and are fully capable of
surviving the rigors of the road. BoatGuard®
Covers are manufactured from acrylic coated
polyester gray Hot Shot ™ fabric that is both
lightweight and water repellent. Storage bag and
tie-downs included.
All BoatGuard covers feature:
• Four-ply folded seams and double-folded hems.
• Strong 1" wide tie-down loops to secure
the cover without scratching the boat.
• Shock cord in the hem for a close fit.
• Sizes to fit most models.
• 2 Year limited warranty
Max.
Beam Width
40
Length/Description
BoatGuard®
Pattern No.
Max.
Beam Width
Length/Description
BoatGuard ®
Pattern No.
to 75"
#70201
to 102"
#70206
to 75"
#70202
to 102"
19' to 21' Center Console
#70191
to 90"
#70203
to 102"
#70192
to 96"
#70204
to 102"
21' to 23' Cuddy Cabin
#70207
to 96"
17' to 19' Tournament Style Bass
#70190
to 102"
18' to 20' Pontoon (playpen)
#70210
to 96"
#70211
to 102"
22' to 24' Pontoon (playpen)
#70193
to 102"
#70205
BoatGuard® Boat Covers
• Heavy duty 6.25 oz. polyester
fabric in two-tone colors.
• Fully trailerable
• Includes storage bag, tie-down
straps and support pole.
• Sewn-in air vents provide
Tie-downs
proper air circulation under
cover.
• Five Year Warranty
Taylor’s newest offering of universal covers is the BoatGuard Eclipse. This cover is designed to be eye catching and fully
trailerable. Made from strong, durable 6.25 oz. polyester in two (2) colors. BoatGuard Eclipse offers excellent mildew and water
resistance and can withstand harsh environments with ease. Unique design spreads strap tension evenly across cover surface.
Each cover includes a storage bag, tie-down straps, and a support pole for a complete boat cover care system.
Max.
Beam Width
Length/Description
Pattern No.
Max.
Beam Width
Length/Description
Sewn-in vent
Pattern No.
to 75"
#70901
to 102"
#70906
to 75"
#70902
to 102"
#70909
to 90"
#70903
to 102"
#70910
to 96"
#70904
to 102"
21' to 23' Cuddy Cabin
#70907
to 96"
17' to 19' Tournament Style Bass
#70908
to 102"
22' to 24' Pontoon
#70912
to 96"
#70911
to 102"
18' to 20' Pontoon
#70913
to 102"
#70905
U.S. Patent
#6,789,495
Max.
Beam Width
Patented Self Supporting Technology represents the
latest Taylor innovation in manufacturing Boat
Covers. In order to prevent rain water and other debris
from collecting on the cover surface, support poles are
integrated into the fabric covers forming a convex
surface, allowing water to run right off. Unlike the
other support devices, these poles are easy to install
and more importantly STAY in place! In addition,
there is no need for both bow and stern support, as the
SST covers are fully supported over the entire length of
the boat. NOTE: SST covers are not intended nor warranted to support snow loads.
Poles are easy to install, stay in
place and fold down for compact
storage when not in use.
Length/Description
• Hot Shot™ fabric is 6.25 oz/sqyd 100% marine grade
pigment coated polyester.
Polyester Pattern No.
to 102"
17' to 19' V-Hull Runabout/Bow Rider
#70305
to 102"
19' to 21' V-Hull Runabout /Bow Rider
#70306
to 102"
21' to 23' Cuddy Cabins
#70307
to 102"
18' to 20' Pontoon Boat
#70309
to 102"
22' to 24' Pontoon Boat
#70308
• Lightweight and highly water repellent, this fabric is
durable, has U.V. protection additive and comes in
our popular sand color.
• Patented mold, mildew and algae fungi inhibitor.
• Includes integrated shock-corded fiberglass poles that
provide exceptional support for water run-off.
Now available for Pontoon Boats!
41
Boat Covers
BoatGuard®
BoatGuard
Rainbreaker
®
Fit
BoatGuard
®
Trailerite
Semi-Custom
®
Trailerite
Custom
®
GOOD
GOOD
BETTER
BEST
Universal 6 Styles
Universal 11 Styles
Semi Custom
Over 35 Hull Styles
Custom - Fit for that
make, Model, and Year
$50 - $80
$80 - $225
$100 - $300
$200 - $600
Shock Chord
Shock Chord
Shock Chord
Nylon Rope
Patented Rope Lock
NO
NO
NO*
YES
Sewn In Tie-Down Loops
YES
YES
YES
YES
4-Ply Seams
YES
YES
YES
YES
Double Folded Hems
YES
YES
YES
YES
Reinforcements
NO
NO
NO*
YES
Fabric Choices
1 Fabric
2 Fabrics
2 Fabrics
3 Fabrics
1
2
7
15
Trailerable
NO
YES
YES
YES
Strap Kit
NO
YES
YES
YES
Price Range
Hem
Colors
To see complete listing of all custom covers available:
Visit us at www.taylormadeproducts.com
Phone: (800) 628-5188 or email: [email protected]
• Rainbreaker Boat Cover includes tie down rope.
* Upgrade to Hot Shot Fabric and get Windshield Reinforcements sewn-in.
Boat Covers Featuring GORE® TENARA® Sewing Thread
UV Sunlight Exposure
The Seams:
100
90
80
70
60
50
40
30
TENARA ® Thread
20
Polyester
10
Cotton/Polyester
•
•
•
•
•
WILL OUTLAST the material it is sewn into
WILL NOT stain
WILL NOT mold
WILL NOT mildew
WILL NOT discolor from sun exposure
0
Initial
1st Year
2nd Year
3rd Year
Exposure: Arizona desert, USA
Double
Stitching
42
Sewn in
Tie-Down Loops
Sewn in
Reinforcement
Patented
Rope Lock
Boat Covers
Legacy™
Available
Boat Guard®
Trailerite®
Hot Shot ™
Ultima™
Trailerite®
Custom Only!
Rainbreaker
Custom & Semi-Custom
BoatGuard® Eclipse & SST
Trailerite® Custom & Semi-Custom
Pigment Coated
Polyester
60/40
Poly/Cotton
Acrylic Coated
Polyester
Coated Polyester
™
Type
Poly-Cotton
Original
Urethane
Water
Resistant
BETTER
GOOD
BEST
BEST
Mildew
Resistant
BETTER
GOOD
BEST
BEST
U.V.
Resistant
BETTER
GOOD
BETTER
BEST
GOOD
BEST
GOOD
GOOD
GORE® TENARA ®
GORE® TENARA®
SEWING THREAD
SEWING THREAD
Breathability
Stitching
POLYESTER
POLYESTER
Strength
BETTER
GOOD
BEST
BEST
Hot, Humid
Climates
BETTER
UNADVISED
BETTER
BEST
3.2 oz.
10 oz.
6.25 oz.
7 oz.
Weight
Colors:
Gray
Fabric Comparison
Ultima™ vs. Acrylic Fabric
Gray
Gray
Blue
Gray
Blue
Navy
Teal
Navy
Sand
Cranberry
Black
Cranberry
Black
Hunter Green
Hunter Green
• Fabric Strength is a measurement of the
breaking strength of the fabric.
• Tear Resistance is a measurement of the
force required to continue a tear
previously started.
• Hydrostatic Pressure is a measure of a
fabric's resistance to the penetration of
water under static pressure.
• Taber Abrasion is the wearing away of
any part of a material by rubbing against
another surface.
ALL COVERS DROP SHIP WITHIN 5 BUSINESS DAYS!
43
Semi-Custom Boat Covers
Now all Semi-Custom covers include tie-downs and shock cord in hem for a custom fit against your hull
IMPORTANT: To choose the correct semi-custom fit cover for your boat, you must know the beam width and center line length
of your boat! Taylor Made Products semi-custom boat covers are designed to fit several makes and models of boats with same hull
styles. This means that the windshield pocket is in the average position for this range of boats. Your boat may differ.
ASK US IF WE HAVE A CUSTOM COVER FOR YOUR BOAT!
To order your Trailerite® boat cover in Hot Shot™, use the Taylor Pattern No. with the letter O as
a suffix, then the proper color code after the O. For example: 70215OT = Hot Shot in Teal. The
different color codes are as follows: Cranberry = Y, Hunter Green = F, Gray = G, Navy = N, Pacific
Blue = B, Teal = T and Black = R.
Extra care should be taken to protect your cover from coming into contact with sharp edges such
as windshields, accessory brackets, or bow mounted electric trolling motors. Please pad these
areas before installing your cover.
CAUTION: Over the years, some boat manufacturers occasionally reuse boat model numbers or
names. Boats having the same name or model number can actually vary in style or size.
ALWAYS MEASURE YOUR BOAT TO BE ABSOLUTELY SURE THAT YOU ARE GETTING THE CORRECT COVER FOR YOUR BOAT!
V-Hull Runabouts
• Open or Closed Bow
• Fits integrated swim platforms and square transoms
• Does not accommodate extended/aftermarket swim platforms
• Bow rails under 6"
• Accommodates low profile accessories and windshields up to 27"
• Sewn in motor hoods
Center-Line Max. Beam Outboard
I/O
Length
Width
Pattern No. Pattern No.
I/O
Length
Width
I/O
Length
Width
13'5" - 14'4"
68"
#70214
#70212
16'5" - 17'4"
90"
#71224
#71724
21'5" - 22'4"
102"
#70222
13'5" - 14'4"
73"
#71214
#70213
17'5" - 18'4"
86"
#70218
#70718
22'5" - 23'4"
102"
#70223
#70723
14'5" - 15'4"
76"
#70215
#70224
17'5" - 18'4"
96"
#71225
#71725
23'5" - 24'4"
102"
#70234
#70724
14'5" - 15'4"
81"
#71215
#70237
18'5" - 19'4"
88"
#70219
#70719
24'5" - 25'4"
102"
#70235
#71727
15'5" - 16'4"
76"
#70216
#70716
18'5" - 19'4"
96"
#71226
#71726
25'5" - 26'4"
102"
#70236
#71728
15'5" - 16'4"
86"
#71223
#71723
19'5" - 20'4"
102"
#70220
#70720
16'5" - 17'4"
80"
#70217
#70717
20'5" - 21'4"
102"
#70221
#70721
Euro V-Hull Runabouts
I/O
Length
Width
• Fits open or closed bow style runabouts and low
profile cuddy cabins.
• Curved glass windshields
• Inboard or outboards.
• Includes extended/aftermarket swim platforms in
overall length.
• Motor hoods sold separately
17'5" - 18'4"
18'5" - 19'4"
19'5" - 20'4"
20'5" - 21'4"
21'5" - 22'4"
22'5" - 23'4"
23'5" - 24'4"
24'5" - 25'4"
25'5" - 26'4"
26'5" - 27'4"
27'5" - 28'4"
102"
102"
102"
102"
102"
102"
102"
102"
102"
102"
102"
#70252
#70253
#70254
#70255
#70256
#70257
#70258
#70259
#70260
#70261
#70262
#70241
#70242
#70243
#70244
#70745
#70246
#70247
#70248
#70249
#70250
#70251
Euro V-Hull Runabouts with Wakeboard Tower
• Fits open or closed bow style runabouts.
• Curved glass windshields
• Does not accommodate tower feet mounted to
top of boat’s gunnel.
• Designed for inboard or outboards.
• Includes extended/aftermarket swim platforms in
overall length.
44
I/O
Length
Width
17'5" - 18'4"
102"
#76700
#76704
18'5" - 19'4"
102"
#76701
#76705
19'5" - 20'4"
102"
#76702
#76706
20'5" - 21'4"
102"
#76703
#76707
21'5" - 22'4"
102"
#77960
#76708
22'5" - 23'4"
102"
#77961
#76709
23'5" - 24'4"
102"
#77962
#76710
#70722
Jet Boats
• Patterned to fit modern jet
propelled boats.
• Low profile decks
• Short side console wind
screens.
Center-Line Max. Beam
Length
Width
Pattern No.
Length
Width
Pattern No.
13'5" - 14'4"
84"
#70111
18'5" - 19'4"
96"
#77990
14'5" - 15'4"
84"
#70112
19'5" - 20'4"
96"
#77991
15'5" - 16'4"
86"
#77989
20'5" - 21'4"
96"
#77992
16'5" - 17'4"
86"
#70113
21'5" - 22'4"
102"
#77993
17'5" - 18'4"
94"
#70114
22'5" - 23'4"
102"
#77994
V-Hull Cuddy Cabin Boats
I/O
Length
Width
• 6-18” bow rails
• Forward decks
• Reduced cockpit
• High windshields
• Fits single outboards
• Does not accommodate extended/
aftermarket swim platforms.
17'5" - 18'4"
93"
#72918
18'5" - 19'4"
93"
#72919
#72719
19'5" - 20'4"
20'5" - 21'4"
102"
102"
#72920
#72921
#72720
#72721
21'5" - 22'4"
102"
#72922
#72722
22'5" - 23'4"
102"
#72923
#72723
23'5" - 24'4"
102"
#72924
#72724
24'5" - 25'4"
102"
#72925
#72725
Conventional Style Walk-Around
Cuddy Cabin Boats
• Wide V-Hulls
• Large cockpit
• Walk around windshield
#72718
I/O
Length
Width
I/O
Length
Width
19'5" - 20'4"
102"
#88061
#88071
26'5" - 27'4"
102"
#77945
#77938
20'5" - 21'4"
102"
#88062
#88072
27'5" - 28'4"
102"
#77946
#77939
21'5" - 22'4"
102"
#88063
#88073
28'5" - 29'4"
102"
#77947
#77940
22'5" - 23'4"
102"
#88064
#88074
29'5" - 30'4"
102"
#77948
#77941
23'5" - 24'4"
102"
#88065
#88075
30'5" - 31'4"
102"
#77949
#77942
24'5" - 25'4"
102"
#88066
#88076
31'5" - 32'4"
102"
#77950
#77943
25'5" - 26'4"
102"
#77944
#77937
Euro Style Walk-Around
Cuddy Cabin Boats
• Wide V-Hulls
• Large cockpit
• Walk around windshield
I/O
Length
Width
I/O
Length
Width
19'5" - 20'4"
102"
#78008
#77995
26'5" - 27'4"
102"
#78015
#78002
20'5" - 21'4"
102"
#78009
#77996
27'5" - 28'4"
102"
#78016
#78003
21'5" - 22'4"
102"
#78010
#77997
28'5" - 29'4"
102"
#78017
#78004
22'5" - 23'4"
23'5" - 24'4"
102"
102"
#78011
#78012
#77998
#77999
29'5" - 30'4"
30'5" - 31'4"
102"
102"
#78018
#78019
#78005
#78006
24'5" - 25'4"
102"
#78013
#78000
31'5" - 32'4"
102"
#78020
#78007
25'5" - 26'4"
102"
#78014
#78001
Day Cruiser Boats
• Long deck V-hulls
• Low bows
• Padded engine compartment
decks
• Includes extended/aftermarket
swim platforms in length
measurements if applicable.
• Minimal cockpit space
• Low profile windshields
• Low rails up front
I/O
Length
Width
Pattern No.
I/O
Length
Width
Pattern No.
15'5" - 16'4"
80"
#76716
23'5" - 24'4"
102"
#88024
16'5" - 17'4"
82"
#76717
17'5" - 18'4"
84"
#76718
24'5" - 25'4"
25'5" - 26'4"
102"
102"
#88025
#88026
18'5" - 19'4"
89"
#76719
26'5" - 27'4"
102"
#77931
18'5" - 19'4"
92"
#76722
27'5" - 28'4"
102"
#77932
19'5" - 20'4"
92"
#76720
28'5" - 29'4"
102"
#77933
20'5" - 21'4"
95"
#77930
29'5" - 30'4"
102"
#77934
20'5" - 21'4"
98"
#88021
30'5" - 31'4"
102"
#77935
21'5" - 22'4"
98"
#88022
31'5" - 32'4"
102"
#77936
22'5" - 23'4"
102"
#88023
45
Euro Tournament Ski Boats w/Wakeboard Tower
• Same as Conventional Ski boats but with side mounted
wake board tower.
• Accommodates standard windshields
• Standard seating
• Designed for inboards
• Mastercrafts & Correctcrafts/Nautiques
• Includes extended/aftermarket swim platforms in overall length.
• Accommodates most tower mounting configurations.
• Hook and loop closure secures cover around tower frames.
Center-Line Max. Beam Inboard
Length
Width
Pattern No.
17'5" - 18'4"
96"
#76737
18'5" - 19'4"
96"
#76738
19'5" - 20'4"
96"
#76739
20'5" - 21'4"
96"
#76740
21'5" - 22'4"
96"
#76741
22'5" - 23'4"
102"
#76742
23'5" - 24'4"
102"
#76743
Conventional Tournament Ski Boats w/Tower
• Mid ship side mounted wakeboard tower
• Does not accommodate tower feet mounted to top of boat’s gunnel
• High powered, flat wake competition ski boats with elongated cockpits
• Accommodates standard windshields
• Designed for inboard only
• Mastercraft & Correctcraft/Nautique style boats
• Accommodates most tower mounting configurations
• Hook and loop closure secures cover around tower frames
Length
Width
Pattern No.
17'5" - 18'4"
18'5" - 19'4"
90"
90"
#76730
#76731
19'5" - 20'4"
102"
#76732
20'5" - 21'4"
102"
#76733
21'5" - 22'4"
102"
#76734
22'5" - 23'4"
102"
#76735
23'5" - 24'4"
102"
#76736
Competition Ski Boats
Length
Width
Pattern No.
• High powered, flat wake competition ski boats with elongated cockpits
• Windshields
• Designed for inboard props
• Mastercrafts & Correctcrafts/Nautiques
• Includes extended/aftermarket swim platforms in length if applicable
17'5" - 18'4"
80"
#76824
18'5" - 19'4"
84"
#76825
18'5" - 19'4"
92"
#76826
19'5" - 20'4"
92"
#76827
20'5" - 21'4"
96"
#76828
21'5" - 22'4"
102"
#76829
V-Hull Fish ’n Ski Boats
I/O
Length
Width
• Walk thru windshield or dual consoles
• Removable or folded pedestal seats
• Fits wide transom boats
• Sewn in motor hood
• Accommodates port side mounted trolling motors
17'5" - 18'4"
96"
#74400
18'5" - 19'4"
96"
#74401
#74500
#74501
19'5" - 20'4"
102"
#74402
#74502
20'5" - 21'4"
102"
#74403
#74503
21'5" - 22'4"
22'5" - 23'4"
102"
102"
#74404
#74405
#74504
#74505
Fish ’n Ski Boats
• Walk thru windshield or dual
consoles
• Removable or folded pedestal seats
• Fits wide transom boats
• Accommodates low profile
trolling motors
Length
Width
Pattern No.
Length
Width
Pattern No.
14'5" - 15'4"
79"
#83215
18'5" - 19'4"
96"
#83219
15'5" - 16'4"
79"
#83216
19'5" - 20'4"
96"
#83220
16'5" - 17'4"
84"
#83217
20'5" - 21'4"
96"
#83214
17'5" - 18'4"
92"
#83218
Tournament Style Bass Boats
• Wide transom bass boats
• Pedestal seats
• With or without wind screens
• Room for folded up troller
46
Len gth
Width
Pattern No.
Length
Width
Pattern No.
13'5" - 14'6"
75"
#88031
16'5" - 17'4"
88"
#88037
14'5" - 15'6"
80"
#88033
17'5" - 18'4"
94"
#88038
15'5" - 16'6"
70"
#88034
18'5" - 19'4"
94"
#88039
15'5" - 16'4"
84"
#88035
19'5" - 20'4"
94"
#88040
Length
Width
Pattern No.
Angled Transom Bass Boats
14'5" - 15'4"
91"
#88100
15'5" - 16'4"
91"
#88101
16'5" - 17'4"
91"
#88102
• Fits bow mounted trolling motors
17'5" - 18'4"
18'5" - 19'4"
96"
96"
#88103
#88104
19'5" - 20'4"
96"
#88105
20'5" - 21'4"
96"
#88106
• Wide transom bass boats with angled stern corners
• Small consoles with or without windscreens
• Accommodates folded pedestal seats
Offshore Fishing Boats
• Center consoles with heights up to 54”
• Large open cockpits
• Sewn in motor hood - Fits up to 250 hp.
• For offshore fishing boats with T-tops SEE Center
Console w/T-Top covers
I/O
Length
Width
I/O
Length
Width
16'5" - 17'4"
17'5" - 18'4"
18'5" - 19'4"
19'5" - 20'4"
20'5" - 21'4"
21'5" - 22'4"
22'5" - 23'4"
23'5" - 24'4"
24'5" - 25'4"
25'5" - 26'4"
88"
92"
96"
102"
102"
#85217
#85218
#85219
#85220
#85221
#85317
#85318
#85319
#85320
#85321
102"
102"
102"
102"
102"
#85222
#85223
#85224
#85225
#85226
#85322
#85323
#85324
#85325
#85326
Whaler Style Inshore Fishing Boats
• Center consoles with heights
up to 48”
• Side rails up to 10”
Length
Width
Pattern No.
Length
Width
Pattern No.
12'5" - 13'4"
66"
#87201
15'5" - 16'4"
80"
#87204
13'5" - 14'4"
72"
#87202
16'5" - 17'4"
88"
#87205
14'5" - 15'4"
74"
#87203
17'5" - 18'4"
90"
#87206
Rounded Bow Bay Boats
up to 48”
• Bow rails up to 6”
• Fits over low profile trolling
motors
• Does not accommodate T-Tops
Length
Width
Pattern No.
Length
Width
Pattern No.
15'6" - 16'5"
16'6" - 17'5"
82"
90"
#70730
#70731
19'6" - 20'5"
20'6" - 21'5"
102"
102"
#70734
#70735
17'6" - 18'5"
94"
#70732
21'6" - 22'5"
102"
#70745
18'6" - 19'5"
98"
#70733
22'6" - 23'5"
102"
#70746
Square Bow Center Console Bay Boat
up to 54” (including windscreen)
• Blunt Bow
• Fits over low profile trolling
motors
Length
Width
Pattern No.
Length
Width
Pattern No.
15'6" - 16'5"
90"
#70755
19'6" - 20'5"
96"
#70759
16'6" - 17'5"
90"
#70756
20'6" - 21'5"
96"
#70760
17'6" - 18'5"
94"
#70757
21'6" - 22'5"
96"
#70761
18'6" - 19'5"
96"
#70758
22'6" - 23'5"
96"
#70762
Bay Style V-Hull Center Console Boats
• Center Consoles with heights (including windscreen) up
to 54” from deck
• V-Hull shallow draft hulls with wider beams
• Accommodates low profile trolling motors
Length
Width
Pattern No.
17'5" - 18'4"
102"
#70747
18'5" - 19'4"
102"
#70748
19'5" - 20'4"
102"
#70749
20'5" - 21'4"
102"
#70750
21'5" - 22'4"
102"
#70751
22'5" - 23'4"
102"
#70752
47
Aluminum V-Hull Fishing Boats
• Fits without windscreen
• Pedestal seats
• With or without motor
• Low profile trolling motors
hoo d
• Reinforced bow and transom corners
Center-Line Max. Beam Pattern with Pattern without
Length
Width
Motor Hood
Motor Hood.
Length
Width
Motor Hood
Motor Hood.
11'5" - 12'4"
66"
#87012
#87112
15'10" - 16'10"
82"
#87019
#87119
12'5" - 13'4"
72"
#87013
#87113
15'10" - 16'10"
87"
#87020
#87120
13'5" - 14'4"
72"
#87014
#87114
16'5" - 17'4"
85"
#87017
#87117
14'5" - 15'4"
75"
#87015
#87115
17'5" - 18'4"
85"
#87018
#87118
15'5" - 16'4"
75"
#87016
#87116
17'5" - 18'4"
91"
#87021
#87121
Basic Fishing Boats
Length
Width
Motor Hood
Motor Hood.
Length
Width
Motor Hood
Motor Hood.
11'5" - 12'4"
58"
#86012
#86112
15'5" - 16'4"
76"
#77972
#77982
11'5" - 12'4"
69"
#77968
#77979
15'5" - 16'4"
82"
#77973
#77983
12'5" - 13'4"
62"
#86013
#86113
15'5" - 16'4"
90"
#77974
#77984
12'5" - 13'4"
72"
#77969
#77980
16'5" - 17'4"
75"
#86017
#86117
13'5" - 14'4"
62"
#86014
#86114
16'5" - 17'4"
85"
#77975
#77985
13'5" - 14'4"
74"
#77970
#77995
16'5" - 17'4"
90"
#77976
#77986
14'5" - 15'4"
65"
#86015
#86115
17'5" - 18'4"
75"
#86018
#86118
14'5" - 15'4"
76"
#77971
#77981
17'5" - 18'4"
80"
#77977
#77987
15'5" - 16'4"
65"
#86016
#86116
17'5" - 18'4"
88"
#77978
#77988
Tournament Style Tri-Hull Fishing Boats
Length
Width
Pattern No.
• Fishing boats with squared or flared bows
(like tri-hull bass boats or modified bass boats)
• Designed to accommodate folded or low profile
fishing seats, port mounted trolling motors,
windscreens and a side console only.
16'5" - 17'4"
85"
#74315
17'5" - 18'4"
85"
#74316
18'5" - 19'4"
90"
#74317
19'5" - 20'4"
96"
#70238
20'5" - 21'4"
96"
#70239
21'5" - 22'4"
96"
#70240
Jon Boats
Length
Width
Pattern No.
• Bench seats
• Square or tapered bow
Length
Width
Pattern No.
11' - 12'
11' - 12'
48"
56"
#88006
#88007
15' - 16'
67"
#88010
15' - 16'
75"
#88014
13' - 14'
61"
#88008
16' - 17'
82"
#88011
13' - 14'
71"
#88009
17' - 18'
82"
#88012
14' - 15'
60"
#88005
18' - 19'
84"
#77966
14' - 15'
75"
#88013
19' - 20'
86"
#77967
Square Bow Aluminum Bass Boats
Length
Width
Pattern No.
• Wide bow
• Folding pedestal seats
• Steering console without windscreen
• Sewn in motor hoods (fits up to 90 hp)
• Fits over low profile trolling motors
• Crestliner, Lund, Alumacraft, and Starcraft styles
13'5" - 14'4"
65"
#78218
14'5" - 15'4"
68"
#78219
15'5" - 16'4"
74"
#78220
16'5" - 17'4"
76"
#78221
16'5" - 17'4"
82"
#78223
17'5" - 18'4"
82"
#78222
Flats Boats
• Flat decks
• Cut out to accommodate
poling platform (does not
cover platform)
48
Length
Width
Pattern No.
Length
Width
Pattern No.
15'6" - 16'5"
80"
#88000
18'6" - 19'5"
96"
#88003
16'6" - 17'5"
80"
#88001
19'6" - 20'5"
96"
#88004
17'6" - 18'5"
96"
#88002
• Bench seats and removable
pedestal seats
• Does not accommodate trolling
motor
• Bow and transom reinforcement
• With or without sewn in
motor hoods
Pontoon Boats
• Patterned for pontoons with rails approximately 30” high
• Available in 2 styles
- Full Deck Covers fit over entire deck area with top down (includes deck area in front of gate)
- Playpen Covers fit over fenced area only
Center-Line Max. Beam Full Cover
Length
Width
Pattern No.
Length
Width
Pattern No.
Length
Width
Pattern No.
15'1" - 16'0"
96"
#88051
19'1" - 20'0"
96"
#88052
23'1" - 24'0"
102"
#26009
15'1" - 16'0"
102"
#26001
19'1" - 20'0"
102"
#26005
24'1" - 26'0"
96"
#88059
16'1" - 17'0"
96"
#88054
20'1" - 21'0"
96"
#88057
24'1" - 25'0"
102"
#26010
16'1" - 17'0"
102"
#26002
20'1" - 21'0"
102"
#26006
25'1" - 26'0"
102"
#26011
17'1" - 18'0"
96"
#88055
21'1" - 22'0"
96"
#88058
26'1" - 28'0"
102"
#88090
17'1" - 18'0"
102"
#26003
21'1" - 22'0"
102"
#26007
26'1" - 27'0"
102"
#26012
18'1" - 19'0"
96"
#88056
22'1" - 24'0"
96"
#88053
27'1" - 28'0"
102"
#26013
18'1" - 19'0"
102"
#26004
22'1" - 23'0"
102"
#26008
Center-Line Max. Beam Playpen
Length
Width
Pattern No.
Length
Width
Pattern No.
Length
Width
Pattern No.
15'1" - 16'0"
96"
#88060
19'1" - 20'0"
96"
#88078
23'1" - 24'0"
102"
#26022
15'1" - 16'0"
102"
#26014
19'1" - 20'0"
102"
#26018
24'1" - 26'0"
96"
#88068
16'1" - 17'0"
96"
#88069
20'1" - 21'0"
96"
#88079
24'1" - 25'0"
102"
#26023
16'1" - 17'0"
102"
#26015
20'1" - 21'0"
102"
#26019
25'1" - 26'0"
102"
#26024
17'1" - 18'0"
96"
#88070
21'1" - 22'0"
96"
#88080
26'1" - 28'0"
102"
N/A
17'1" - 18'0"
102"
#26016
21'1" - 22'0"
102"
#26020
26'1" - 27'0"
102"
#26025
27'1" - 28'0"
102"
#26026
18'1" - 19'0"
96"
#88077
22'1" - 24'0"
96"
#88067
18'1" - 19'0"
102"
#26017
22'1" - 23'0"
102"
#26021
Deck Boats
Length
Width
Pattern No.
Length
Width
Pattern No.
• Steering consoles with low or
no windscreens, and low profile
full windshields
• Fits both inboards and outboards
16'5" - 17'4"
90"
#77916
22'5" - 23'4"
102"
#77923
17'5" - 18'4"
102"
#77917
23'5" - 24'4"
102"
#77924
18'5" - 19'4"
102"
#77919
24'5" - 25'4"
102"
#77925
19'5" - 20'4"
102"
#77920
25'5" - 26'4"
102"
#77926
20'5" - 21'4"
102"
#77921
26'5" - 27'4"
102"
#77927
21'5" - 22'4"
102"
#77922
27'5" - 28'4"
102"
#77928
Tri-Hull Boats
• Fits most Big “V” wide bow Tri-Hulls
• Walk-thru windshields
Full Cover
Playpen Cover
• Bow rails under 6”
• Sewn in motor hoods on outboard models
I/O
Length
Width
I/O
Length
Width
13'5" - 14'4"
68"
#73214
N/A
17'5" - 18'4"
86"
#73218
#73718
14'5" - 15'4"
75"
#73215
#73715
17'5" - 18'4"
96"
#74218
#74718
14'5" - 15'4"
84"
#74215
N/A
18'5" - 19'4"
90"
#73219
#73719
15'5" - 16'4"
80"
#73216
#73716
18'5" - 19'4"
102"
#74219
#74719
15'5" - 16'4"
90"
#74216
#74716
19'5" - 20'4"
96"
#73220
#73720
16'5" - 17'4"
82"
#73217
#73717
19'5" - 20'4"
102"
#74220
#74720
16'5" - 17'4"
92"
#74217
#74717
Modified Tri-Hull Boats
I/O
Length
Width
• Tri-Hulls with 1-piece windshields
• Accommodates bow rails
• Sewn in motor hood on outboard models
14'5" - 15'4"
72"
#75201
N/A
15'5" - 16'4"
82"
#75202
#75702
16'5" - 17'4"
84"
N/A
#75703
16'5" - 17'4"
86"
#75204
#75704
17'5" - 18'4"
88"
#75205
#75705
17'0"
82"
#75206
#75706
DON’T FORGET THAT PROPER SUPPORT LENGTHENS THE LIFE OF YOUR COVER!
49
Accommodates Outboards
Inflatable Sport Boats
• Designed for blunt bow,
tapered or blunt Pontoons
Inflatable Sport boats.
• Covers fit from end of
pontoons to bow.
• Accommodates low con
soles without windscreens
• Does not fit over
outboard motor.
• Designed for blunt bow, tapered
Pontoon Inflatable Sport Boats
• Covers fit from bow to end of
pontoons up and over tilted
outboard motor.
• Accommodates low consoles
without windscreens
Length
Width
Pattern No.
7'5" - 8'4"
60"
Length
Width
Pattern No.
8'5" - 9'4"
60"
#73000
#73001
9'5" - 10'4"
66"
#73002
7'5" - 8'4"
55"
#70125
10'5" - 11'4"
68"
#73003
8'5" - 9'4"
55"
#70126
11'5" - 12'4"
70"
#73004
#73005
9'5" - 10'4"
60"
#70127
12'5" - 13'4"
74"
10'5" - 11'4"
11'5" - 12'4"
66"
66"
#70128
#70129
13'5" - 14'4"
74"
#73006
14'5" - 15'4"
76"
#73007
12'5" - 13'4"
70"
#70130
15'5" - 16'4"
76"
#73008
13'5" - 14'4"
72"
#70131
16'5" - 17'4"
80"
#73008
14'5" - 15'4"
76"
#70132
17'5" - 18'4"
80"
#73010
Inflatable Dinghies
Jet Ski/PWC
• Designed for pointed bow, rounded
stern Inflatable Dinghies
• Covers fit from bow to end of stern
• Accommodates low consoles without windscreens
• Does not fit over outboard motors
• Designed to fit most make and
model PWC’s
• Covers offer a more liberal fit,
yet still trailerable
• Includes adjustable webbing
strap to secure under hull
Description
Up to Year 2000
Pattern No.
#70136
2 Seater
#70078
2 Seater
#77963
#70137
3 Seater
#70079
3 Seater
#77964
4 Seater
#70080
4 Seater
#77965
Length
Width
Pattern No.
Length
Width
Pattern No.
7'5" - 8'4"
55"
#70133
10'5" - 11'4"
66"
8'5" - 9'4"
55"
#70134
11'5" - 12'4"
66"
9'5" - 10'4"
60"
#70135
Molded Bass Boats
Paddle Boats
• Fits most basic Molded Bass
Boats without windshields
• Fits over folded pedestal seats
• For basic molded paddle
boats without windshields,
canopies or hard tops
Length
Width
Pattern No.
Length
Width
Description
2000 to 2010
Pattern No.
Pattern No.
up to 8'
48"
#78216
up to 7'2"
61"(3 Seater)
#78214
up to 9'6"
48"
#78217
up to 7'8"
65"(5 Seater)
#78215
DON’T FORGET THAT PROPER SUPPORT LENGTHENS THE LIFE OF YOUR COVER!
For help finding the correct cover for your boat
use one of our easy services:
Visit our Online Fit Guide:
Call our Boat Cover Hot Line: (800) 628-5188
e-mail: [email protected]
Ask for our EASY Fax Fit Form: (518) 725-4910
FEATURING THE
LARGEST SELECTION OF
NEW MODELS
50
Boat Cover Accessories
Bows mounted in bow sockets are the sure and
easy way to keep a boat cover taut and free from
water-collecting pockets. Sockets can be mounted
on any rail system (A) or anywhere on deck wall
(B). Rubber gasket provides snug fit for fiberglass
bows.
Bow Socket
Bow
Boat Gunnel
Rub Rail
Rubber Gasket
Rail Bow Sockets (A)
Die Cast Bow Sockets (B)
Rail Bow Socket
Die Cast Bow Socket
• Accepts any bow, and fits 7.8" rails
• No mounting holes to drill.
• Includes hardware for fastening bow to socket.
• Made of tough nylon.
• Accepts any bow.
• Chrome-plated.
Stock No.
#936 Rail bow socket (pair)
Stock No.
Description
#935
Die cast bow socket (pair)
#144935
Bulk pack (144 pair)
Types of Bows - Wood Bows are 1 1/2" wide x 5/16" thick
WOODEN BOWS - (Fixed Length)
WOODEN BOWS - (Adjustable)
FIBERGLASS BOWS
Strong. Resilient. Sap-free Poplar wood
Two pieces held by “D” ring.
Super strong and flexible. Will not take a “set.” Cut
to desired length. Shipped with rubber end covers
to grab socket. Orange color
Stock No.
#928
#929
#144928
#144929
Length/Packaging
96"
72"
96" Bulk pack (one gross)
72" Bulk pack (one gross)
Stock No.
#934
Length/Packaging
Adjustable 48" to 92"
Super Support Pole
Stock No.
#924
#925
#926
Length x Width x Thickness
72" x 1-1/4" x 3/16"
84" x 1-1/4" x 3/16"
96" x 1-1/4" x 3/16"
Adjustable Boat Cover Support Pole
Extend the life of your boat cover by
preventing water from pooling on top.
Our standard boat cover support pole
has a non-marring tip on each end
of a telescoping aluminum tube.
A durable plastic knob allows for easy
adjustment of the height.
This fully adjustable support pole is 3 support poles in one! We supply
a male canvas snap, a grommet tip, and a plain end cap with these
Super Support Poles. So, if you have a female canvas snap or a
grommet on your boat cover, you can get a support that will work with
your cover. The pole is aluminum, with a durable plastic adjuster to
set the correct height for your cover. Also comes in a 3 piece pole that
collapses down to 22" for easier storage.
Stock No.
#11992
Super Support Pole, 36" to 64"
Stock No.
#11981
3 Piece Super Support Pole, 22" to 59"
DON’T FORGET THAT PROPER SUPPORT
LENGTHENS THE LIFE OF YOUR COVER!
Stock No.
#11991
Adjustable boat cover support pole, 36" to 64"
51
Boat Vent II - Newest in Boat Cover Venting & Support
Don’t let your interior suffer from mold and mildew damage. Proper ventilation can keep
these boat destroying fungi from attacking your boat! The patented Boat Vent II installs
quickly and easily, with no screws or fasteners. The venting area provides for greater volume
of exhaust air while closing the top to bottom gap - keeping water out! The Boat Vent II is
manufactured from a superior grade poly carbonate blend material for strength and UV
resistance and will accommodate either 3/4" or 7/8" support poles. Sold Individually.
PROPERLY VENTS
YOUR BOAT COVER
WHILE KEEPING
WATER OUT!
Stock No. #11982
Boat Vent II
Quick-On Tie-Down Kit
Boat Cover TieDown Strap "QuickClip" - Holds even pressure on tie down loops
- Makes for a simple and secure way to attach tiedown straps to boat cover. Works
on all 1" webbing loops and buckles. Attaches to almost any boat cover.
Stock No.
Description
#55740
12 pack
8’
#55742
2 pack
8’
#55748
8 pack
8’
•Durable quick release buckle.
•Sun resistant polypropylene
webbing.
• Includes NEW locking Quick Clip
Boat Cover Support System
Boat Cover Repair Kit
Extend the life of your boat cover by preventing water from pocketing.
The system includes 50 feet of webbing, quick release buckles, a boat
cover support pole that snaps to the webbing, and two hooks to attach
to the transom.
If you have a torn cover as a result of sharp corners, you can
repair it with our deluxe poly/cotton repair kit. One square yard of
fabric is supplied with a four ounce bottle of specially designed
fabric glue for easy attachment to your cover.
Stock No.
52
Length
#55741
Stock No.
Description
#67680
Boat cover repair material, poly/cotton (Silver Gray)
Snaps Fastener Installation Tool
• Easy to use.
• Complete instructions
included.
• Die and setting tool, packaged as a set.
Stock No.
#1360
“One-Way” Snaps
Snap Fasteners
Standard Snap-on and Snap-off design.
Snaps on and off in any direction.
Push down on the spot to lock. Lift up on the
spot to release. Specially designed for extra
holding power. Releases only in the direction
of the spot.
#16401
Female fastener. Attaches to cloth (4 sets)
#116401
Bulk pack (100 sets)
#16402
Male fastener on wood screw (4 sets)
#116402
#16403
Male fastener. Attaches to cloth (4 sets)
#116403
E-Z™ Grommet Set
#401
Female fastener. Attaches to cloth (6 sets)
#100401
#402
Male fastener on wood screw (6 sets)
#100402
#403
Male fastener. Attaches to cloth (10 sets)
#100403
#404
Male fastener on machine screw
with nut (4 sets)
Clinching Ring Pliers
Specially made to grip clinching
rings for 3/16" to 1/2" diameter.
Spring loaded handles to hold
ring until clamped on. Overall
length 6-7/8."
Installs #2 size grommets with 3/8" hole.
Set contains hole punch, setting tool,
and 18 #2 brass grommets and washers.
#1365
E-Z Grommet Set
#1231
Extra #2 brass
grommets and washers— 12 sets
Taylor Super Snap
Stock No.
Description
#1046
Clinching ring pliers
#1044
50 stainless steel rings fit 3/16"- 5/16" cord
#1045
50 stainless steel rings fit 3/8"- 1/2" cord
Tarphooks™
Portable and Easy to Use
Simply place the disk underneath the tarp and
slide the loop onto the grooved disk. The Super
Snap can be attached either semi-permanently,
enabling you to slip the disk on and off as needed, or permanently, using nails, screws, etc. Use
the end hook for hanging light objects, or run a
line through the hole for heavier objects.
Stock No. #823 (4 per pack)
Simply fill an ordinary soda bottle with
sand, screw on a detachable Tarphook, and
you have a versatile and inexpensive
weight.
Use For:
• Tarp weights
• Hanging storage containers for clothes
pegs, nails, nuts and bolts, garden seeds,
liquids.
• Bird feeders
• Targets
• Hanging baskets
• Plus many more household items.
53
Specialty Covers
Camouflage Boat Covers
Protect your boat while in storage or while
trailering and keep it concealed from wary
waterfowl the next time you hunt. Covers
are manufactured from Hot Shot™ acrylic
coated polyester in a jungle camo print.
Aluminum bass and jon boat models
include bound-in motor hoods. UV
resistant and water repellent finish.
2 Year
Warranty!
Motor Hood Covers
Not only can you hide your
boat from wary waterfowl,
but you can also hide that
protruding outboard motor.
Manufactured from the same
great Hot Shot™ fabric as the
Camouflage covers. Hoods
come in 3 size to best accommodate your outboard motor.
Max.
Beam Width
15'5"- 16'4"
74"
Aluminum Bass O/B
#78220CAM
16'5"- 17'4"
76"
Aluminum Bass O/B
#78221CAM
17'5"- 18'4"
82"
Aluminum Bass O/B
#78222CAM
13' - 14'
61"
Jon Boat O/B
#88008CAM
13' - 14'
71"
Jon Boat O/B
#88009CAM
15' - 16'
67"
Jon Boat O/B
#88010CAM
16' - 17'
82"
Jon Boat O/B
#88011CAM
17' - 18'
82"
Jon Boat O/B
#88012CAM
11'5"- 12'4"
66"
V-Hull Fishing W/O Hood
#87112CAM
13'5"- 14'4"
72"
#87114CAM
Motor Hood
Pattern No.
Dimensions (L x W x H)
54
Description
#926111CAM
19" x 9" x 12"
#926222CAM
20" x 10" x 14"
15'5"- 16'4"
75"
#87116CAM
#926333CAM
22" x 10" x 17"
17'5"- 18'4"
85"
#87118CAM
Boat Seats & Console Covers
Terry
Cloth
White
Vinyl
Navy
Rip/Stop
Polyester
•
•
•
•
•
• Mildew & water resistant
• UV Protection
• Water proof
• Air vents
• Heavy duty
• Draw string hem
•
•
•
•
•
•
Breathable
Mildew resistant
UV Protection
Completely washable
Elastic hem
Hot Shot™
Pattern No.
Center
Line-Length
Breathable
Mildew and water resistant
UV Protection
Heavy duty
Polyurethane coating
Air vents
Keep your seats and consoles from cracking
and fading! Our boat seat and console covers
are designed to protect your seats and
electronics from damaging ultra-violet rays, wind,
mildew and water. Our covers are available in
Terry Cloth, Heavy duty white vinyl, and 600
denier Rip/Stop Polyester with a polyurethane
coating. All our covers fold easily for storage
and keep your seats cool and clean!
Terry
Cloth
White
Terry Cloth
Blue
Terry Cloth
White
Vinyl
Rip/Stop
Polyester
18"High x 20"Wide x 40"Deep
#11994
#11997
--
--
Back to Back Lounge Seat
--
--
#40210
#80210
Jump Seat
18"High x 20"Wide
#11996
#11999
--
--
Folding Pedestal
#80220
#40230
#80230
Small Swingback Seats
#40240
#80240
Large Swingback Seats
#40245
#80245
Small Center Console
#40400
#80400
Medium Center Console
#40410
#80410
Large Center Console
--------
#40220
Helm/Bucket/Fixed Back
--------
#40420
#80420
Description
Dimensions
Back to Back Lounge Seat
White
Vinyl
Navy
Rip/Stop
Polyester
Specialty Covers
Personal Water Craft Custom Covers
Made from our Hot Shot ™ marine polyester fabric, these form-fitting covers offer year round
protection for your jetski. The fit is custom to your make, model, and year, so they will not wind
whip while trailering. Durable Hot Shot ™ fabric is acrylic coated 100% polyester and is treated
for mold and mildew resistance.
Stock No.
Year
Manufacturer
Model
Stock No.
Year
Manufacturer
#70420
1998
Kawasaki
750 STX/900 STX
#70463
2004-2006
SeaDoo
Model
RXP
#70421
1997-1999
Kawasaki
1100 STX
#70464
2005-2006
SeaDoo
RXT GTX LTD
#70421
1999-2000
Kawasaki
900 STX
#70432
2000-2001
Yamaha
XL 700
#70422
1995-1997
Kawasaki
ST/STS
#70432
1998-1999
Yamaha
XL 760
#70423
1996-1999
Kawasaki
SPORT
#70432
1998
Yamaha
XL 1200
#70423
1992-1995
Kawasaki
SS/SXi
#70433
2000-2001
Yamaha
XL 800
#70424
1995-1998
Kawasaki
750 ZXI
#70433
1999-2001
Yamaha
XL 1200
#70424
1996-2003
Kawasaki
900 ZXI/1100 ZXI
#70434
1997-1999
Yamaha
GP 1200/GP 700
#70443
1994-1996
Kawasaki
650 SX
#70434
1998-2000
Yamaha
GP 800R/GP 760
#70444
1994-1996
Kawasaki
650 TS
#70435
2001-2003
Yamaha
GP 800R
#70445
1996
Kawasaki
750 SX/SXi
#70435
2000-2002
Yamaha
GP 1200 R
#70445
1998-2002
Kawasaki
750/SXi Pro
#70436
THRU 1997
Yamaha
Venture 1100/760
#70446
1999-2001
Kawasaki
Ultra 130
#70437
THRU 1997
Yamaha
Raider 700/760/1100
Yamaha Runner LX/VXR/Pro VXR
#70446
1999-2003
Kawasaki
Ultra 150
#70438
THRU 1996
#70459
2000-2003
Kawasaki
1100 STX DI
#70455
THRU 2004
Yamaha
Super Jet
#70461
1994-1996
Kawasaki
440/550/3308
#70456
THRU 1997
Yamaha
WavRunner III/III GP
#70425
2000-2003
SeaDoo
RX
#70457
THRU 1997
Yamaha
Wave Blaster II
#70426
1991
SeaDoo
GT
#70458
1999-2004
Yamaha
SUV 1200
#70426
1993-2000
SeaDoo
GTS
#70466
2004-2006
Yamaha
GP 1300
#70426
1993-1995
SeaDoo
GTX
#70467
2006
Yamaha
FX Cruiser
#70426
1996
SeaDoo
GTI
#70468
2004-2006
Yamaha
FX HO
#70427
1997-2000
SeaDoo
GTI
#70469
2004-2006
Yamaha
#70427
1997-2002
SeaDoo
GTX
#70439
1995-1998
Polaris
SLT
#70428
1997-2003
SeaDoo
XP/XP LTD
#70440
2000-2001
Polaris
Virage
#70429
1993-1996
SeaDoo
XP/XP 800
#70441
THRU 1997
Polaris
SL
1997-1999
SeaDoo
SPX
#70447
1999-2004
Polaris
Genesis
#70430
THRU 1996
SeaDoo
SPX
#70448
1998-2002
Polaris
SL
#70430
1993-1999
SeaDoo
SP/SPI
#70442
THRU 1995
Tiger Shark
900
#70431
1996-2001
SeaDoo
GS/GSI/GSX
#70442
THRU 1997
Tiger Shark
Monte Carlo 900
#70449
2001-2004
SeaDoo
GTi/GTS
#70451
1996-1997
Tiger Shark
Montego Deluxe
#70450
2002-2006
SeaDoo
GTX 4-Tec/GTX Di
#70451
THRU 1996
Tiger Shark
Montego/Daytona
#70460
2003-2005
SeaDoo
GTi LE RFI
#70452
1998-1999
Tiger Shark
TS
SeaDoo
GTX
#70453
1998-1999
Tiger Shark
TSL
Tiger Shark
TSR
2006
#70454
1999
• All model colors are gray and white
VX/VX 110 Sport/DLX
#70429
#70462
• Available for most makes and models
(Kawasaki, Yamaha, SeaDoo, Polaris and
Tigershark)
• 6.25 oz/sqyd. material is strong yet
lightweight, so its easy to handle
and stow.
• Shock cord in hem for a close fit.
• Heavy duty sewing construction.
5 Year
Limited
Warranty!
Deck Chair Covers
Rubber Chair Tips
Help protect your deck chairs from sun and wind damage. Our Vinyl and
Rip/Stop deck chair covers cover with elastic fitted bottoms and reinforced air
vents allow moisture to escape.
No-marking rubber tips are great for use on deck chairs,
boarding ladders, boat hooks, etc. Sold in packages of 4 tips.
Dimensions (H x W x D)
Stock No.
Description
#40235
Heavy duty white vinyl
29" x 26" x 29.5"
#96025
Fits 1" tubing
#80235
Blue Rip/Stop Polyester
29" x 26" x 29.5"
#96026
Fits 1-1/8" tubing
#96024
Fits 7/8" tubing
55
Specialty Covers
Custom Outboard Motor hoods
Protect your outboard motor from harsh marine environments and keep it looking like new. Our custom outboard
motor covers have been designed to fit the most popular outboard motors available. Cut to fit close for trailering,
the motor hoods feature a draw rope sewn in the hem to insure a tight secure fit. Made from Hot Shot™ fabric, these
covers are water, mildew, and UV resistant, yet breathable, to allow moisture to escape. Choose from 8 great Hot
Shot™ colors (below).
#926223
Mercury EFI Four Stroke 40hp
#926230
Evinrude E-Tech 4 Stroke 40hp
#926224
Mercury Optimax 4 Stroke 75hp
#926334
Yamaha V-8 4 Stroke 350hp
#926225
Mercury Verado 4 Stroke (6 cylinder) 300hp
#926335
Yamaha 4 Stroke 250hp/225hp/200hp
#926226
Mercury Verado 4 Stroke (6 cylinder) 350hp
#926336
Yamaha Vmax Series 4 Stroke 150hp/200hp/250hp
#926227
Honda V-Tech 4 Stroke 225hp/150hp/135hp
#926337
Yamaha 4 Stroke 50hp/60hp
#926228
Evinrude E-Tech 4 Stroke 25hp/50hp/60hp
#926338
Yamaha 4 Stroke 115hp
#926229
Evinrude E-Tech/H.O. 4 Stroke 115hp/130hp
Outboard Motor Covers
Keep your new outboard motor looking good and protect it against harmful environmental conditions. Our
outboard motor covers have been redesigned to better fit the newer cowl sizes and later model engines. Simply
measure your outboard and determine those dimensions that most closely match your particular model.
Pattern No.
Pattern No.
#926112
16" x 11" x 11"
#926444
27" x 14" x 23"
#926113
24" x 12" x 15"
#926116
30" x 18" x 25"
#926111
19" x 9" x 12"
#926555
31" x 23" x 24"
#926114
19" x 14" x 27"
#926666
33" x 25" x 28"
#926222
20" x 10" x 14"
#926117
35" x 17" x 28"
#926333
22" x 10" x 17"
#926777
32" x 27" x 34"
#926115
25" x 17" x 25"
#926888
41" x 22" x 35"
• Cut to fit close for trailering
• Poly/cotton boat cover fabric
• Draw rope in the hem
• Available in silver gray poly/
cotton fabric or Hot Shot™
colors (below).
Propeller Covers
You want your boating accessories to match the color of your boat to create the perfect color scheme.
So why not finish off your entire package with a matching cover for your propeller? These covers not
only help protect your prop from rocks and road debris while trailering, but are also padded for extra
protection against propeller edges. 1/8" shock cord with wheel cord lock sewn in hem allows you to
easily secure the cover. Choose from 8 great Hot Shot™ colors (shown below).
We also offer custom screen printing!
Your logo printed on the prop cover can
serve as a great advertising tool!
YOUR
LOGO
HERE!
Measurements
(Dia. x Depth)
Stock No.
Description
#93000
Up to 10" Propeller Cover
12" Dia. x 10" D
#93010
14" Dia. x 10" D
#93020
16" Dia. x 10" D
To order your motor or propeller cover in Hot Shot™ colors, use the Taylor Pattern No. with the letter O as a suffix, then the proper color code after the O. For
example: 926111OT = Hot Shot in Teal. The different color codes are as follows: Cranberry = Y, Hunter Green = F, Gray = G, Navy = N, Pacific Blue = B, Teal = T,
Black = R and White = W
Pacific Blue
56
Teal
Cranberry
Gray
White
Navy
Black
Hunter Green
Pontoon Boat Accessories
Pontoon Playpen Shade
A quick and easy way to gain additional shaded area on
your pontoon boat while protecting your seats from the
harmful UV rays from the sun or other harsh weather
conditions. Shade is available in sizes to accommodate
boats up to 102” width and extends out to 12 ft. of
coverage. Constructed from Hot Shot™ marine grade
polyester fabric, the top is strong yet light weight. It is
secured to the front bow of your existing bimini or hard
top and down to the playpen railing with adjustable
straps with quick release buckles for simple and fast
installation. Shade folds down to compact size for ease
of storage and is available in (9) colors to best match
your boat. Not for use while underway.
18’-20’ BOATS
Stock No.
22’-24’ BOATS
Color
Stock No.
Color
#12008OB
Pacific Blue
#12009OB
Pacific Blue
#12008OF
Hunter Green
#12009OF
Hunter Green
#12008OG
Gray
#12009OG
Gray
#12008ON
Navy
#12009ON
Navy
#12008OR
Black
#12009OR
Black
#12008OS
Sand
#12009OS
Sand
#12008OT
Teal
#12009OT
Teal
#12008OW
White
#12009OW
White
Cranberry
#12009OY
Cranberry
#12008OY
Available
Colors
Pacific Blue
Black
Gray
Navy
Pontoon Gazebo
Hunter Green
Sand
Teal
White
Cranberry
A quick and easy way to gain additional shaded area on your pontoon boat.
Top accommodates both 96" and 102" wide boats and extends out to 8ft. of
coverage. Constructed from Hot Shot ™ marine grade polyester fabric, the top is
strong yet light weight. It is supported by shock-corded fiberglass pole framework that breaks down for convenient storage. The large interior radius allows
you to sit comfortably without bending over and provides excellent head room.
After initial installation of permanently mounted hardware to your playpen rail,
the Pontoon Gazebo attaches easily and comes down in minutes. Comes
complete with shade top, frame, marine grade hardware and storage bag, and
is available in (9) colors to best match your boat. The Gazebo measures 8' Long
x 102" Wide x approximately 50" High from mounting point.
NOTE: The Gazebo obstructs the drivers vision and
as such should NEVER be put up while the boat is in
motion; at any speed. This product is designed to
provide shade while moored or anchored only!
Pacific Blue
Navy
Black
Teal
Cranberry
Hunter Green
Sand
White
Gray
Stock No.
Color
#12003OB
Pacific Blue
#12003OF
Hunter Green
#12003OG
Gray
#12003ON
Navy
#12003OR
Black
#12003OT
Teal
#12003OY
Cranberry
#12003OS
Sand
#12003OW
White
57
Pontoon Boat Cover Support System
Extend the life of your pontoon
boat cover by preventing water
from pocketing. This easily
installed system includes two (2)
adjustable support poles (bright dip
anodized - snap ends). 60 ft. of 1"
polypropylene webbing, quick
release adjuster buckles and four
injection molded hooks to secure
to decking.
Stock No. #55745
Pontoon Boat Cover Support System
Pontoon Enclosure
SHADE • SHELTER • PRIVACY
Add all of these great features to your Pontoon Boat
Providing comfort and convenience, this spacious enclosure fits easily over the
bow area of your pontoon boat. Constructed from durable polyester fabric shell
(fire retardant) with zippered entryway, mesh windows and supported by a
shock-corded fiberglass pole framework. The Enclosure measures approximately
56” deep x 74” tall (varies slightly by beam and railing height) by the width of
the playpen area (fits both 96” and 102”).The large interior radius allows you to
sit comfortably on existing seating without bending over or crouching down.
After initial installation of permanently mounted hardware, the Pontoon
Enclosure sets up easily and comes down in minutes for convenient storage.
Comes complete with enclosure, frame, marine grade hardware, storage bag
and instructions. Enclosure is available in multiple colors to best match your
existing bimini or canvas.
NOTE: Not to be used while under
way. Enclosure should not be left up for
storage or extended periods of time.
Stock No.
Color
Stock No.
Color
#12006OB
Pacific Blue
#12006OS
Sand
#12006OF
Hunter Green
#12006OT
Teal
#12006OG
Gray
#12006OW
White
#12006ON
Navy
#12006OY
Cranberry
#12006OR
Black
Pontoon Flag Pole Socket with Flag
Developed with the Pontoon Boater in mind, this new injection molded, black nylon mount attaches easily to
the top of your pontoon railing and features a 10 degree presentation angle. The 3/4” diameter bright dipped
anodized aluminum pole simply snaps into the base and features color matched Charlevoix flag clips. The 24”
model includes a 12”x18” sewn US Flag. The 30” comes complete with a
16”x24” sewn US Flag.
Stock No.
58
Description
#921
Pontoon Flag and Mount 24” 12 x 18 US
#922
Pontoon Flag and Mount 30” 16 x 24 US
1" Square Tube Bimini Top
Get a Bimini for your pontoon boat from one of the leading suppliers. Tops are made from 1" square aluminum tubing, with all metal hardware
(included). All tops are 8' long, and 56" tall, and are available in 96" or 102" widths, and come with a matching storage boot. Choose from white
marine vinyl or our Ultima™ fabric in 8 great colors. Frame is a “knock-down” style, which is shippable by UPS.
96" WIDTH
Stock No.
Color
102" WIDTH
Stock No.
Color
#84089
White Vinyl
#84100
White Vinyl
#84090
Pacific Blue
#84101
Pacific Blue
#84091
Navy
#84102
Navy
#84092
Teal
#84103
Teal
#84093
Black
#84104
Black
#84097
Hunter Green
#84105
Hunter Green
#84098
Cranberry
#84106
Cranberry
#84099
Gray
#84107
Gray
Available Colors
White Vinyl
Pacific Blue
Navy
Teal
Black
Hunter Green
Cranberry
Grey
1 1/4" Square Tube Bimini Top
Top frames are made from 1 1/4" satin finish anodized, heavy wall square
tubing, patterned from OEM suppliers. All tops are 56" maximum height,
eight feet long and are available in 96" or 102" widths. Available in
the same white marine vinyl and (7) great colors of Ultima™ solution
dyed polyester as our 1" Square Bimini. Tops zip onto frame for easy
installation. Come complete with stainless steel fasteners, nylon fittings
and aluminum deck mounts.
Square Tube Bimini Support Poles
Stock No.
#11984
96" WIDTH
Stock No.
Color
102" WIDTH
Stock No.
#84110
White Vinyl
#84118
White Vinyl
#84111
Pacific Blue
#84119
Pacific Blue
#84112
Navy
#84120
Navy
#84113
Teal
#84121
Teal
#84114
Black
#84122
Black
#84115
Hunter Green
#84123
Hunter Green
Description
#84116
Cranberry
#84124
Cranberry
Fixed Bimini support poles (1" sq. tube) Pair
#84117
Gray
#84125
Gray
Square Tube Bimini BoaTop® Hardware
Easy Up Privacy Partition
• Replacement hardware for
square tube Bimini tops as
used on most of today’s
pontoon boats.
This partition provides privacy
from on-lookers while out on
the water. It can be installed
anywhere under your bimini top
or hard top with included straps
and hardware. Constructed
from "fire retardant" marine
grade polyester, it easily secures
with UV resistant tie downs and
fasteners. Features a full length,
heavy duty zipper for easy access
and when installed measure
30" wide x 30" deep x 70" tall.
Gray color only.
• Sold in single pieces
Stock No.
Color
Description
Color
#11829
1" square jaw slide
Black
#11830
1" square jaw slide
White
#11831
1" square internal eye end
Black
#11832
1" square internal eye end
White
#11833
1" square external eye end
Black
#11834
1" square external eye end
#11835
Deck mount bracket w/3 screws
White
Aluminum
Polyester Gray
Stock No.
#67867
59
Pontoon Fender
Fence Saver
These unique fenders offer a level of
protection to areas on the Pontoon boat
other fenders can’t provide. The Pontoon
Fender is specifically designed to fit snugly
between the pontoon and the deck of
the boat, protecting both from rafting
boats, docks, or other objects. All pontoon
fenders are made from our own marinegrade, U.V. resistant vinyl and have an
integrated rubber football style valve for
easy inflation. Measures
9" wide x 16" Long.
The Fence Saver secures to the
fence or railing and is designed to
prevent contact to the delicate
aluminum fencing. The fence
saver is especially effective
preventing those nasty dings that
occur when rafting a pontoon
boat to a conventional hull boat.
Measures 9" wide x 36" Long.
Stock No. #31030
Great protection
while rafting against
other boats!
U.S. Patent #6,758,156
Stock No. #31032 Fence Saver
Corner Bumpers
Fence Saver II
The pontoon corner bumpers come in two shapes for both radius style or
o
90 pontoon corners. Bumpers mount over the original factory installed
aluminum corner section to provide air-cushioning impact protection when
docking. Special gray pvc formulated to match the aluminum color of the
boat and secures with stainless fasteners. Each measure 3" wide x 12" Long.
The Fence Saver II offers the
same great features as the original
Fence Saver but with greater
cushioning. Constructed from
soft PVC it’s flexible make up
allows the Fence Saver II to
absorb impacts similar to an
air-filled product but without the
need for an inflation valve.
Measures 9" wide x 36" Long.
o
#31033
90 Corner
#31034
Radius Corner
Stock No. #32000 Fence Saver II
Pontoon Protector
Protect the leading edge of your pontoons with our
double molded PVC Pontoon Protector. Manufactured
from the same vinyl as our rugged Dock Pro™ dock
edging, these will save both dock and boat from impact
damage. Easy to install with water proof, self-adhesive
strips. Measures 3" wide x 12" Long. Sold in pairs.
Stock No. #46010 Pontoon Protector
Pontoon Rail Fender Adjuster
Finally, a fender adjuster designed specifically for the 1" square tube rails of
Pontoon Boats. The mounting structure clamps securely to square tubing yet
can be repositioned quickly and easily. Constructed from durable ABS plastic
this fender adjuster allows for simple height adjustment for lines up to 3/8".
60
Stock No.
Description
#1139
Fender adjuster for square tube rails, 4/pack
#11391
Counter top merchandiser, 36 pieces
New cam lock and strap fastening system no longer requires
access behind fence rail. Simply hang fender over top rail, attach
strap hook to boat deck and draw tight.
Inflatable Boat Accessories
Inflatable Boat Shade Top
A quick and easy way to gain shaded area on your PVC inflatable boat. Top
accommodates boat widths up to 5' 7" and lengths to 10' 8" and is supported
by shock-corded fiberglass pole framework that breaks down for convenient
storage. Fabric shade constructed from Hot Shot™ fabric which is lightweight,
water, and UV resistant. After initial installation of permanently mounted
hardware to your boat, the top sets up and attaches easily and comes down
in minutes. The large radius allows you to sit and operate the boat comfortably
without crouching over and provides excellent head room. Shade comes
complete with shade top, frame, marine grade hardware, storage bag and
instructions.
Stock No. #12007OG
Shade Top for SB4/5 HP4/5 Gray
Under Seat Storage Bag
Bow Bag
Much-needed storage
space on an inflatable
boat is provided with
our Under Seat Storage
Bag. It attaches with
a hook-and-loop enclosure and will fit most
bench seats. We’ve also
included a shoulder
strap that allows you to
carry the bag with you when you leave the boat. The top of the
bag is padded to “soften the ride” on the wood bench seat. Vinyl
material will not mildew and is waterproof.
Keep all of your “stuff”
together on your inflatable
boat with our handy Bow
Bag. Dual zippers provide
easy access, while water
resistant vinyl material
provides for an effective dry
storage area. The bag is 24"
wide at the zippers, 10" tall,
19" front to back, and will fit
most inflatable boats.
Stock No. #888
Stock No. #889
Measures 10"W x 23"L x 7" Deep
Keeps your belongings
clean and dry all day!
Gray Bow Bag
61
Bimini Boatops®
Don’t let too much sun cut your boating day short! Taylor Made® Bimini BoaTops® provide lots of refreshing shade while affording you
visibility over your windshield instead of just through it. These tops are freestanding, providing more air circulation, and can be mounted in
several locations on the boat. Note: Bimini Top should never be open when boat speed is over 25 mph.
* Ultima Bimini BoaTops®
Ultima™ Bimini BoaTops
Taylor Made Products’ free-standing Bimini BoaTops feature Ultima™ fabric, which has been the
top line fabric for custom boat covers. Ultima (solution dyed polyester) insures the absolute best performance in strength, color fastness & UV stability, and longevity. Its urethane coating provides
superior water repellency, while maintaining breathability.
Selecting Your Bimini BoaTop®
* Excluding white vinyl
*Remember; The combination of height and length determine how much shade your Bimini
BoaTop® will provide. Think about how you use your boat and what you want to shade; for example,
if you want to shade yourself and your children in the back, you probably want the longest Bimini
available in a medium height. If you are out fishing by yourself most of the time, you probably want
the smaller, shorter Bimini BoaTop®.
Don’t Forget; The width depends entirely on your boat - You must use a measuring
tape to ensure the correct fit!
Length
*Determine length of
top, 4', 6', or 8'.
Width
*Determine the
width of the top: Measure
from mounting point (where
top attaches) on one side of
boat to same location on
opposite side of boat (not
the same as the beam of the
boat or boat width)
Height
*From mounting
location, measure straight up
with a tape measure for the
correct top height. Choose
from 36", 42", or 54".
All sizes shipped
unassembled.
Can be shipped UPS.
ALL BIMINI BOATOPS® SHIP WITHIN 5 BUSINESS DAYS!
62
Bimini Boatops®
8 Colors Available
Pacific
Blue
Teal
Navy
Black
Taylor Made® Bimini BoaTops® included:
•
•
•
•
•
•
•
•
Non-corrosive, high density black nylon fittings.
Heavy-duty thick wall 7/8” bright anodized aluminum tubing.
Double-wall tubing in main bow (on larger models).
Bow Straps for extra support.
Sewn in Bow Sleeve helps eliminate “parachuting” effect.
Both horizontal and vertical hardware included.
Adjustable polypropylene tie down straps and strap eyes included.
Ultima™ Fabric Top (Highest Quality Available), Traditional Marine Vinyl
is also available.
• Bimini Boots included except where noted.
• All sizes shipped unassembled and ship UPS.
Cranberry White Vinyl
Hunter
Green
Gray
36" HEI GHT
WIDTH
4' LENGTH
60"-66"
67"-72"
COLORS
WHITE VINYL/NO BOOT
WHITE HOT SHOT™/NOBT
ULTIMA™
PACIFIC BLUE
CRANBERRY
GRAY
TEAL
HUNTER GREEN
NAVY
BLACK
73"-78"
WIDTH
79"-84"
85"-90"
91"-96"
STOCK NUMBER
6' LENGTH
60"-66"
67"-72"
COLORS
62110
62001
62111
62002
62112
62003
62113
62004
62114
62005
62115
62006
62131
62203
62224
62245
62300
62321
62342
62132
62204
62225
62246
62301
62322
62343
62133
62205
62226
62247
62302
62323
62344
62134
62206
62227
62248
62303
62324
62345
62135
62207
62228
62249
62304
62325
62346
62136
62208
62229
62250
62305
62326
62347
WHITE VINYL/NO BOOT
ULTIMA™
PACIFIC BLUE
CRANBERRY
GRAY
TEAL
HUNTER GREEN
NAVY
BLACK
73"-78"
79"-84"
85"-90"
91"-96"
STOCK NUMBER
62117
62007
62118
62008
62119
62009
62120
62010
62121
62011
62122
62012
62138
62210
62231
62252
62307
62328
62349
62139
62211
62232
62253
62308
62329
62350
62140
62212
62233
62254
62309
62330
62351
62141
62213
62234
62255
62310
62331
62352
62142
62214
62235
62256
62311
62332
62353
62143
62215
62236
62257
62312
62333
62354
42" HEIGHT
WIDTH
WIDTH
6' LENGTH
60"-66" 67"-72"
COLORS
WHITE VINYL/NO BOOT
WHITE VINYL
WHITE HOT SHOT™
ULTIMA™
PACIFIC BLUE
CRANBERRY
GRAY
TEAL
HUNTER GREEN
NAVY
BLACK
73"-78"
79"-84" 85"-90" 91"-96" 97"-103"
8' LENGTH
60"-66" 67"-72"
COLORS
STOCK NUMBER
62164
62264
62017
62095
62170
62270
62088
62096
62176
62276
62090
62097
62182
62282
62091
62098
62188
62288
62092
62099
62194
62294
62093
62216
62199
62299
62094
62217
62019
62025
62031
62037
62043
62049
62055
62020
62026
62032
62038
62044
62050
62056
62021
62027
62033
62039
62045
62051
62057
62022
62028
62034
62040
62046
62052
62058
62023
62029
62035
62041
62047
62053
62059
62024
62030
62036
62042
62048
62054
62060
62079
62080
62081
62082
62083
62084
62085
WHITE VINYL/NO BOOT
WHITE VINYL
WHITE HOT SHOT™
ULTIMA™
PACIFIC BLUE
CRANBERRY
GRAY
TEAL
HUNTER GREEN
NAVY
BLACK
73"-78" 79"-84"
85"-90"
91"-96" 97"-103"
STOCK NUMBER
82164
82264
82001
82008
82170
82270
82002
82009
82176
82276
82003
82010
82182
82282
82004
82011
82188
82288
82005
82012
82194
82294
82006
82013
82199
82299
82007
82014
82019
82025
82031
82037
82043
82049
82055
82020
82026
82032
82038
82044
82050
82056
82021
82027
82033
82039
82045
82051
82057
82022
82028
82034
82040
82046
82052
82058
82023
82029
82035
82041
82047
82053
82059
82024
82030
82036
82042
82048
82054
82060
82079
82080
82081
82082
82083
82084
82085
54" HEI GHT
WIDTH
WIDTH
6' LENGTH
60"-66" 67"-72"
COLORS
WHITE VINYL/NO BOOT
WHITE VINYL
WHITE HOT SHOT™
ULTIMA™
PACIFIC BLUE
CRANBERRY
GRAY
TEAL
FOREST GREEN
NAVY
BLACK
73"-78"
79"-84" 85"-90" 91"-96" 97"-103"
8' LENGTH
60"-66" 67"-72"
COLORS
STOCK NUMBER
64164
64264
64001
64011
64170
64270
64003
64013
64176
64276
64004
64014
64182
64282
64007
64015
64188
64288
64008
64016
64194
64294
64009
64018
64199
64299
64010
64063
64019
64025
64031
64037
64043
64049
64055
64020
64026
64032
64038
64044
64050
64056
64021
64027
64033
64039
64045
64051
64057
64022
64028
64034
64040
64046
64052
64058
64023
64029
64035
64041
64047
64053
64059
64024
64030
64036
64042
64048
64054
64060
64079
64080
64081
64082
64083
64084
64085
WHITE VINYL/NO BOOT
WHITE VINYL
WHITE HOT SHOT™
ULTIMA™
PACIFIC BLUE
CRANBERRY
GRAY
TEAL
FOREST GREEN
NAVY
BLACK
73"-78"
79"-84" 85"-90" 91"-96" 97"-103"
STOCK NUMBER
84164
84264
84008
84016
84170
84270
84010
84017
84176
84276
84011
84018
84182
84282
84012
84061
84188
84288
84013
84062
84194
84294
84014
84063
84199
84299
84015
84064
84019
84025
84031
84037
84043
84049
84055
84020
84026
84032
84038
84044
84050
84056
84021
84027
84033
84039
84045
84051
84057
84022
84028
84034
84040
84046
84052
84058
84023
84029
84035
84041
84047
84053
84059
84024
84030
84036
84042
84048
84054
84060
84079
84080
84081
84082
84083
84084
84085
63
Bimini Boatops®
Hot Shot™
Bimini BoaTops®
36" HEI GHT
Fabric
Pattern No.
Manufactured with the same great
features as the current tops, these units
are sold with the Frame & Fabric Tops
packaged separately. Frames are Bright
Dip Anodized Aluminum with Marine
Nylon Hardware; Tops are manufactured from Hot Shot Acrylic Coated
Polyester that are available in (7)
great colors, or in White Marine
Vinyl. Note: Hot Shot BoaTop Storage
Boots w/ zipper are not included, but
are available through Taylor Made.
Pacific Blue
White Vinyl
Teal
Navy
Hunter Green
*
Cranberry
Top and Frame
Dimensions
Frame
Part No.
#36700
4'X 36"X 60-66"
#36467
#36701
4'X 36"X 67-72"
#36473
#36702
4'X 36"X 73-78"
#36703
4'X 36"X 79-84"
Hot Shot Bimini BoaTops®
Top and Frame
Dimensions
Frame
Part No.
#36712
6'X 36"X 60-66"
#36667
#36713
6'X 36"X 67-72"
#36673
#36479
#36714
6'X 36"X 73-78"
#36679
#36485
#36715
6'X 36"X 79-84"
#36685
#36704
4'X 36"X 85-90"
#36491
#36716
6'X 36"X 85-90"
#36691
#36705
4'X 36"X 91-96"
#36497
#36717
6'X 36"X 91-96"
#36697
42" HEI GHT
#42700
6'X 42"X 60-66"
#42667
#42714
8'X 42"X 60-66"
#42867
#42701
6'X 42"X 67-72"
#42673
#42715
8'X 42"X 67-72"
#42873
#42702
6'X 42"X 73-78"
#42679
#42716
8'X 42"X 73-78"
#42879
#42703
6'X 42"X 79-84"
#42685
#42717
8'X 42"X 79-84"
#42885
#42704
6'X 42"X 85-90"
#42691
#42718
8'X 42"X 85-90"
#42891
#42705
6'X 42"X 91-96"
#42697
#42719
8'X 42"X 91-96"
#42897
#42706
6'X 42"X 97-103"
#42698
#42720
8'X 42"X 97-103"
#42900
Black
Gray
Fabric
Pattern No.
54" HEIGHT
#54700
6'X 54"X 60-66"
#54667
#54714
8'X 54"X 60-66"
#54867
#54701
6'X 54"X 67-72"
#54673
#54715
8'X 54"X 67-72"
#54873
#54702
6'X 54"X 73-78"
#54679
#54716
8'X 54"X 73-78"
#54879
#54703
6'X 54"X 79-84"
#54685
#54717
8'X 54"X 79-84"
#54885
#54704
6'X 54"X 85-90"
#54691
#54718
8'X 54"X 85-90"
#54891
#54705
6'X 54"X 91-96"
#54697
#54719
8'X 54"X 91-96"
#54897
#54706
6'X 54"X 97-103"
#54698
#54720
8'X 54"X 97-103"
#54900
PONTOON BOATS - 56" HEIGHT
#84000
8'X 56"X 96"
#601325
#84005
8'X 56"X 102"
#601326
To order Bimini Tops in Hot shot, use fabric pattern number with the letter “O” as a suffix and then the
proper color code after the O Ex. 36705OB = Hot shot Blue. Color Codes as follows: Pacific Blue = B,
Hunter Green = F, Gray = G, Navy = N, Teal = T, Cranberry = Y, Black = R, White = W. Simply Use
Pattern # for White Marine Vinyl
ALL BIMINI BOATOPS ® SHIP WITHIN 5 BUSINESS DAYS!
64
Bimini Boatops®
Full Frame Bimini BoaTop
®
*
We now offer all of our Taylor Made® Bimini BoaTops in a full frame
construction, as opposed to the three-piece knock down construction. The
aluminum frames are available in two lengths (6', 8'), two heights (42", 54")
and widths ranging from 60" to 103." Frames are 7/8" bright dip anodized
aluminum tubing with non-corrosive high-density black nylon fittings.
Also available in 36" high (x 4 ft and 6 ft) and 8 ft long (x 42" and 54") Full
frame bimini's. Ask your Taylor Made Products representative for a part
number listing and pricing. Full frame tops are shipped fully assembled.
Truck shipments only.
Ultima™, Hot Shot™
and Sunbrella®
Bimini BoaTops®
42" HEI GHT
54" HEIGHT
WIDTH
WIDTH
6' LENGTH
60"-66" 67"-72"
73"-78"
COLORS
79"-84" 85"-90" 91"-96" 97"-103"
STOCK NUMBER
WHITE VINYL
6' LENGTH
60"-66" 67"-72"
COLORS
42300
42309
42318
42327
42336
42345
42354
PACIFIC BLUE
42302
42311
42320
42329
42338
42347
42356
CRANBERRY
42303
42312
42321
42330
42339
42348
42357
GRAY
42307
42316
42325
42334
42343
42352
TEAL
42304
42313
42322
42331
42340
HUNTER GREEN
42308
42317
42326
42335
NAVY
42306
42315
42324
BLACK
42305
42314
RED
42301
42363
73"-78" 79"-84"
91"-96" 97"-103"
54300
54309
54318
54327
54336
54345
54354
PACIFIC BLUE
54302
54311
54320
54329
54338
54347
54356
CRANBERRY
54303
54312
54321
54330
54339
54348
54357
42361
GRAY
54307
54316
54325
54334
54343
54352
54361
42349
42358
TEAL
54304
54313
54322
54331
54340
54349
54358
42344
42353
42362
HUNTER GREEN
54308
54317
54326
54335
54344
54353
54362
42333
42342
42351
42360
NAVY
54306
54315
54324
54333
54342
54351
54360
42323
42332
42341
42350
42359
BLACK
54305
54314
54323
54332
54341
54350
54359
42310
42319
42328
42337
42346
42355
RED
54301
54310
54319
54328
54337
54346
54355
42364
42365
42366
42367
42368
42369
54366
54367
54368
54369
54370
54371
54372
ULTIMA™
WHITE VINYL
ULTIMA™
HOT SHOT™
HOT SHOT™
WHITE
WHITE
Available Colors
Pacific
Blue
85"-90"
STOCK NUMBER
Teal
Also available in:
Cranberry
White
Vinyl
Navy
Black
Hunter
Green
Gray
Red
brand fabric
Sunbrella® is a registered trademark of Glen Raven, Inc.
65
Bimini Boatops®
Custom Ski Boat Biminis
Bimini tops designed specifically for tournament/competitive style ski
boats. These biminis covers the driver, observer and front of the
engine box. Taylor Made Bimini BoaTops® create refreshing shade on
your boat and let you enjoy the view over your windshield.
Freestanding Bimini BoaTops® provide great air circulation and can
mount in several locations on your boat. Includes all mounting hardware and fittings.
Available in 8 great
Hot Shot™ colors.
Stock No.
LxHxW
Dimensions
#63200
4'x 30"x 75"
#63224
4'x 30"x 78"
#63248
4'x 30"x 82"
#63212
6'x 30"x 75"
#63236
6'x 30"x 78"
#63260
6'x 30"x 82"
Pacific Blue
Teal
Cranberry
White
Navy
Black
Gray
Hunter Green
To order your bimini in the Hot Shot color desired use the Taylor Stock No. with the letter O as a suffix, then th e proper
color code after the O. For example: 63200OB = Hot Shot in Pacific Blue. The different color codes are as follows: Pacific
Blue = B, Hunter Green = F, Gray = G, Navy = N, Black = R, Teal = T, White = W, and Cranberry = Y.
Square Tube Mini Pontoon Bimini Top
A high quality Bimini BoaTops® for the popular, narrow beam Pontoon boats. Frames
are made from 1" square, satin anodized aluminum tube, nylon 66 fittings and all
stainless steel mounting hardware. Fabric options are, white marine grade vinyl or
our Ultima™ solution dyed polyester for superior strength and color retention. Tops
measure 72" wide by 72" long and are 56" high (above playpen railing). Rear frame
supports and storage boot included.
Dimensions
Note: Frame has a
Stock No.
LxWxH
Color
knock-down design
#84130
6'x 72"x 56"
White Vinyl
and can be drop
shipped
#84131
6'x 72"x 56"
Blue
#84132
6'x 72"x 56"
Navy
#84133
6'x 72"x 56"
Black
#84134
6'x 72"x 56"
Hunter Green
#84135
6'x 72"x 56"
Teal
#84136
6'x 72"x 56"
Cranberry
#84137
6'x 72"x 56"
Grey
Ultima™ Colors
Pacific
Blue
Teal
Cranberry
2 Bow Bimini Tops
Choose a more economical version of the Bimini BoaTop® with our 2-Bow
Bimini Top. An ideal top for small fishing boats and inflatables to protect
against the sun’s dangerous UV rays. For use only when your boat is anchored
or drifting, not while the boat is under power. All tops are 42” high.
66
Stock No.
Width
#62144
40"- 48"
#62153
49"- 57"
#62161
58"- 66"
#62171
67"- 75"
#61993
Inflatable Boat Mounting Kit
Available in
8 great
Hot Shot™ colors!
White
Vinyl
Navy
Black
Hunter
Green
Gray
Bimini Boatops®
Tower Bimini Top
These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for driver and spotter. All tops are
48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed
from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features Ultima fabric ™ for the best performance
in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top:
The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade
to the driver’s seat. The tops are low profile at approximately 16” high at the maximum, so be sure that the position will keep the top high
enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the
dimensions from the chart, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure
that the angle of your tower will accommodate that dimension.
Width at Mount
68"-71"
75"-78"
81"-84"
Width at top
60"
67"
73"
Width at top
Measure up 16"
Mounting point width
68"-71" WIDTH
75"-78" W IDTH
81"-84" WI DTH
Stock No.
Stock No.
Stock No.
Color
Color
Color
#62123
Pacific Blue
#62174
Pacific Blue
#62184
Pacific Blue
#62124
Teal
#62175
Teal
#62185
Teal
#62125
Cranberry
#62177
Cranberry
#62186
Cranberry
#62126
White Vinyl
#62178
White Vinyl
#62187
White Vinyl
#62127
Navy
#62179
Navy
#62189
Navy
#62128
Black
#62180
Black
#62190
Black
#62129
Hunter Green
#62181
Hunter Green
#62191
Hunter Green
#62130
Gray
#62183
Gray
#62192
Gray
Bimini Sox™
Protect your clear windows from sun burn, cracking, fading and browning out from contact with hot bimini framework. Packaged in sets of 2 - 72" long by 5" wide and designed to fit 7/8" & 1" frames, these strips can be cut to fit
many different applications, and close securely with hook and loop fasteners. Available in two fabric options,
Sunbrella® acrylic fabric or Polyester Indoor/Outdoor carpet.
- Acrylic
Carpet
Polyester Indoor/Outdoor Carpet
Stock No.
Description
#13001
Black Acrylic
Stock No.
#13007
Black Polyester
Description
#13002
Burgundy Acrylic
#13008
Burgundy Polyester
#13003
Sand Acrylic
#13009
Sand Polyester
#13004
Gray Acrylic
#13010
Gray Polyester
#13005
Navy Acrylic
#13011
Navy Polyester
#13006
Pacific Acrylic
#13012
Pacific Blue Polyester
Saves you
hundreds of
dollars in
replacement
windows!
Sunbrella®
Fabric
67
Bimini Boatop® Accessories
Bimini Support Poles
Keep your Bimini BoaTop® off the
gunwales with a pair of bimini
support poles. Available in
adjustable or fixed lengths, use
these poles to replace your rear
straps and keep your top “up and
out of the way.” Two jaw slides
(7/8") and deck hinge are included.
Stock No.
Description
#11995
Adjustable Bimini support poles (2) 28" to 48"
#11989
Fixed Bimini support poles (2) 40" length
Adjustable
Fixed length
CAUTION: These poles should never be used to replace the front support straps. Only the rear straps should be replaced with
adjustable support poles. Do not exceed 35 miles per hour while using adjustable Bimini top support poles.
®
Zippered Storage Boots for Bimini BoaTops
Keep your Bimini BoaTop® neatly stored when you are not on the boat.
Boots feature one separating plastic zipper for easy on/easy off, and are made
of marine vinyl to last for years. Available in our marine grade vinyl or Hot
Shot™ acrylic coated polyester fabric, that makes the boot strong yet light
weight and easy to store.
Pattern No.
Width
Pattern No.
Width
#63164
60" to 66"
#63188
85" to 90"
#63170
67" to 72"
#63194
91" to 96"
#63176
73" to 78"
#63199
97" to 103"
#63182
79" to 84"
Pacific Blue
Navy
Teal
Black
Cranberry
Hunter Green
Sand
White Vinyl
Gray
To order your Bimini Top Boot in Hot Shot ™ colors use the Taylor Pattern No. with the letter O
as a suffix, then the proper color code after the O. For example: 742000OT = Hot Shot in Teal.
The different color codes are as follows: Cranberry = Y, Hunter Green = F, Gray = G, Navy = N,
Pacific Blue = B, Teal = T and Black = R, Sand = S.
68
Bimini Boatop® Accessories
Nylon Slides
Stainless Steel Pull Pins
Deck Hinge
Eye Straps
Replaces the screws in our
stainless steel and chromed
zamak deck hinges. Allows
fast and easy mounting or
removal of a Bimini top.
Comes complete with safety
lanyard to prevent lost pins.
1 1/4" long, and Sold in pairs.
One pair, designed to mount
horizontally.
Stock No. #5854
Aluminum Slide Assemblies
Replacement nylon slides for
slide assemblies. Fits .850 track
slot openings. Sold in pairs.
Stock No.
Description
#11717
Black
#1204
Chromed Zamak
Stock No. Color
Size
#1225
Chromed 1-1/2" long, 5/16" eye
Zamak
(one pair)
#1227
Stainless 1/4" Stainless Steel
(4 pack)
#11718
White
Plastic Eye Straps (4 per pack)
#11733
Stainless Steel 90˚ deck hinge
#11713
Black
1-7/8" long, 1/2" eye
Stock No. #11227
#11734
Stainless Steel Angle deck hinge
#11714
White
1-7/8" long, 1/2" eye
Slide Assemblies End Cap
Snaps
Internal Eye End (one pair)
Fold your top behind the rear seat.
Easy installation. Fits most deck
hinges. Non-locking. Sold in pairs.
Stock No.
Size
#993018
18"
#993030
30"
#993045
45"
#993060
60”
Stock No.
#993072
72”
#5962
For slide track assemblies.
Sold in pairs.
Dog Snap Shown #1340.
Stock No.
Size
Color
#11207
7/8"
Chromed Zamak
#1202
3/4"
Chromed Zamak
#11703
7/8"
Black
Stock No.
Description
#11704
7/8"
White
Color
#1340
SS Dog snap (2 per pack)
#11702
3/4"
White
Chromed Zamak
#1341
SS Baby snap (2 per pack)
Bimini Hinge Thumb Screw
Jaw Slide (one pair)
Chromed Zamak Eye Straps
Side Mount Deck Hinge
External Eye End
Stock No. Size
Stock No.
Size
Color
#11210
7/8"
Chromed Zamak
#1209
3/4"
Chromed Zamak
#11711
7/8"
Black
#11709
3/4"
Black
#11712
7/8"
White
Designed as a replacement for
holding screws on our stainless
steel and chromed zamak Bimini
deck hinges. Available in White
and Black. Sold in pairs.
#11206
Color
7/8"
Chromed Zamak(1 pair)
Mounts vertically on side walls. Sold
in pairs. Hardware not included.
#1203
3/4"
Chromed Zamak(1 pair)
#11707
7/8"
Black (1 pair)
Stock No.
Color
#11705
3/4"
Black (1 pair)
#11721
Black
#11708
7/8"
White (1 pair)
#11710
3/4"
White
Stock No.
Color
#1205
Chromed Zamak
#11706
3/4"
White (1 pair)
#11731
7/8"
Stainless (1 per pk.)
#11736
Black
#11722
White
#11729
7/8"
#11732
1"
#11737
White
#11735
#11730
1"
Adjustable Tie-Down Strap
Rail Mount Hinge
6' long, fitted with stainless steel
ring at one end and stainless steel
snap on the other. Sold in pairs.
• Installs easily without needing to disassemble your railing.
• Made from T316 polished stainless steel.
Stock No.
Color
Stock No.
Description
#11993
Black
#11749
Fits 7/8" railings
#2000
White
#11750
Fits 1" railings
69
Bimi-Tee Tops® & Accessories
Bimi-Tee Tops™
Convenient bimini tops can be installed in seconds. Choose
from seven colors of our Ultima™ fabric or economical white
vinyl and large (4 1/2' x 6') or extended (5' x 7 ') sizes. Fabric
tops are mounted directly to the console without straps or
hardware to install, so you have comfortable walk-around
clearance. Each top features a heavy-duty built in zipper for
easy removal. Support framing sold separately.
NOTE: Boat speed should not exceed 25 mph.
Pacific Blue
Teal
Cranberry
White Vinyl
Navy
Black
Hunter Green
Gray
Large Stock No.
#281670
#281672
#281673
#281693
#281676
#281677
#281679
#281671
Extended Stock No.
#281681
#281683
#281684
#281694
#281687
#281688
#281690
#281682
Standard Stock No.
#281590
#281592
#281593
#281692
#281596
#281597
#281599
#281591
Stainless-Steel Bimi-Tee Frame
Stock No.
Description
#62157
Large Floor Mount
Size
Heavy-duty 7/8" stainless-steel frames are designed to fit a wide variety of console sizes.
Tops detach in seconds for storage and include all Stainless Steel fittings and hardware.
Tower stands 76" high. Includes Stainless Steel hardware.
#62156
Extended Floor Mount
5' x 7'
#62160
Standard Console Mount
4' x 5'
#62167
Large Console Mount
Teal
Cranberry
4.5' x 6'
4.5' x 6'
T-Top Bow Shade
A quick and easy way to gain additional shaded area on your
center console boat with a T-top installed. Shade is available
in sizes to accommodate boats up to 102" width and extends
out to 7 ft. of coverage. Constructed from Hot Shot ™ marine
grade polyester fabric, the top is strong yet light weight. It is
secured to the T-top and bow rails with adjustable straps with
quick release buckles for simple and fast installation. Shade
folds down to compact size for ease of storage and is available
in (9) colors to best match your boat.
No Poles or Supports necessary!
6 ' LONG X 90" WIDE
Stock No.
Color
#12004OB
Pacific Blue
#12004OF
Stock No.
#12005OB
Color
Pacific Blue
Hunter Green
#12005OF
#12004OG
Gray
#12005OG
Gray
#12004ON
Navy
#12005ON
Navy
#12004OR
Black
#12005O R
Black
#12004OT
Teal
#12005OT
Teal
#12004OY
Cranberry
#12005OY
Cranberry
#12004OS
Sand
#12005OS
Sand
#12004OW
White
#12005OW
White
Recommended for boats 17'-21'
70
7' LONG X 102" WIDE
Hunter Green
Recommended for boats 23'-26'
Quick release
buckle
Pacific Blue
Navy
Black
Hunter Green
White
Sand
Gray
T-Top Accessories
T-Top Boat Covers
For Boats with Fixed T-Tops
• Bow and stern sections zip together; for single
person installation.
• “Console tube” secures up underneath the T-Top,
protects the center console and will accommodate
most sizes and locations of tops and consoles on
boats up to 25'4".
• Tie-Downs System included, this system relieves
stress on the zippered ends during over the road
trailering.
• Now available for boats without bow rails.
w/Bow Rails
Pattern No.
Without Rails
Pattern No.
#74200
#74300
Center-Line Length Max Beam
(from - to)
Width
17' 5" to 18' 4"
Without rails
102"
#74201
#74301
18' 5" to 19' 4"
102"
#74202
#74302
19' 5" to 20' 4"
102"
#74203
#74303
20' 5" to 21' 4"
102"
#74204
#74304
21' 5" to 22' 4"
102"
#74205
#74305
22' 5" to 23' 4"
102"
#74206
#74306
23' 5" to 24' 4"
102"
#74207
#74307
24' 5" to 25' 4"
102"
#74208
#74318
25' 5" to 26' 4"
102"
To order your T-Top boat
cover in Hot Shot™ colors
use the Taylor Pattern No.
with the letter O as a suffix,
then the proper color code
after the O. For example:
742000OT = Hot Shot in
Teal. T he differen t color
codes are as follows:
Cranberry = Y, Hunt er
Green = F, Gray = G, Navy =
N, Pacific Blue = B, Teal = T
and Black = R.
Universal T-Top Center Console Covers
This trailerable T-Top Console cover is secured to the underside of the fixed T-Top structure and
will enclose any size console, helm seat and T-Top support combination with a maximum base
perimeter (at the deck) of 18' or less. All console covers measure 48"W x 60"L x 66"H
• Adjustable straps allow the cover to conform to most
console configurations.
• Boats with smaller consoles and T-Tops can also cover
and protect the helm seats.
• Heavy duty marine grade zipper allows easy installation
and removal.
Stock No.
Fabric/Color
#67852
Poly-Cotton/Grey
#67852OB
Hot Shot/Blue
#67852OG
Hot Shot/Grey
Clamp-On Sun Shade
Keep the sun out of your eyes while on board using our new Clamp-On Sun Shade. The
Universal Mounting clamp secures tightly to round or square tubing up to 1-1/2" diameter. This
unique clamp allows the shade portion to swivel, so you can get that extra shade right where
you need it. Shade portion is approximately 60" long and 28" wide and is available in two
popular colors. Unit comes complete with heavy duty, marine grade injection molded clamp
and shade that detaches for more compact storage.
NOTE: Not for use while underway
Stock No.
Description
#25001OB
Blue Clamp-On Sun Shade
#25001OW
White Clamp-On Sun Shade
Quick-Disconnect feature
for removal while underway.
71
AnchorShade®II
Great
NEW
Design!
Now 33% larger
than the original
AnchorShade!
Hinge Connectors
Powder Coating
Twist Cam-Lock
Sur-Lock Mechanism “Market Style” Top
Long known for manufacturing quality marine products, Taylor Made Products has
re-invented the highly successful Anchorshade. Several important design changes are
being introduced, including larger diameter and solid fiberglass structural ribs, and hinge
connectors which are twice as strong as on our last model. Also added to these improvements, is a powder-coated aluminum frame (so even if scratched, it will not rust), a 4-point
locking height adjuster and a Sur-Lock push-up mechanism. These newest innovations are
sure to keep your Anchorshade II looking and working well, for years to come!
This uniquely designed 7ft. x 7ft. square umbrella can be used on almost any vessel from a
small fishing boat to the larger high performance boats. AnchorShade®II is designed to be
used when anchored or at idle speed on a calm day. AnchorShade®II is perfect for relaxing
on the water, at dockside, or just lounging on the beach.
•
•
•
•
Adjustable pole locks in place up to 8’.
Lightweight, mildew/fade resistant UV-treated nylon top.
Excellent sun protection. Blocks out 85-90% of harmful rays.
Adjustable straps with non-corrosive hardware provide mounting
flexibility for nearly all applications.
• “Market Style” top allows venting to occur without loss of sun protection
• Comes complete with its own heavy duty carrying case
with shoulder strap.
• Available in ten (10) dynamic colors to
best match your boat.
Available Colors
White
72
Blue
Teal
Stock No.
Color
Stock No.
#22030
White
#22035
#22031
Blue
#22036
Sand
#22032
Teal
#22037
Black
#22033
Red
#22038
Burgundy
#22034
Navy
#22039
Gray
Red
Navy
Color
Forest Green
Forest Green
U.S. patent #5,441,066
Sand
Black
Burgundy
Gray
Comfort Zone™ Boat Misting System
The ultimate accessory for:
How the System Works
Misting is based on the theory of Evaporative Cooling. The system forces water through
specially designed misting nozzles creating a fog of ultra fine water droplets with an average
size of 50 microns or less. The water droplets are so small they can instantly flash evaporate,
which can reduce the surrounding temperature as much as 30 degrees in just seconds. The
system uses a one of a kind booster pump that draws only one amp, delivers 130 psi and keeps
a flow rate as low as one gallon per hour depending on the number of nozzles installed. This
cool refreshing air makes your boating experience more enjoyable and can lengthen your
stay on the water during the hottest summer days!
Cools
Temperatures
o
Up to 30
Instantly!
Basic Kit
Stock No. #1420
Water Source Options
Use our direct connect system to tap into the onboard water source. We have quick “Push
to Connect” tee connectors that splice right into the boats on-board water lines (for
systems using 1/4” tubing lines). Find water supply line from galley pump to sink/shower, cut
line and use our Quick Connector fittings to tee into the red inlet line. A water container
(not included) can also be used. We offer a 7 gallon hard plastic container or a 5 gallon
folding collapsible container (see all available accessories below). Both containers have
attachments that hook up directly to the red inlet lines. NOTE: Systems can also draw
water from most fresh water lakes.
Comfort Zone™ Accessories
#1425
5 gallon. folding water tank
#1434
#1427
7 gallon water tank
#1435
Quick connect ON/Off reducing T - 1/2" & 1/2" to 1/4"
Replacement water inlet tube & mesh filter (8 feet)
#1428
On/Off switch with fused wiring harness
#1436
Replacement sediment filter
#1429
Replacement misting nozzles - 4 pk. (Standard with T- connector)
#1437
Line clips - 4 pk.
#1430
Misting nozzle - 1.0 gal/hr. (for dry climates)
#1438
1/4" misting line tube - 20 ft.
#1432
Quick connect elbow fitting
#1439
5 gallon container connector set
#1433
Quick connect “Y” fitting
#1440
7 gallon connector set
73
Specialty Products
Aerators & Fountains
Environmentally Friendly Oil-Free Design is the Perfect Choice!
Taylor Made aerators and decorative aerators, commonly called fountains, are simple, mechanical devices. They offer an easy, cost effective solution to water quality problems in ponds and
small lakes up to two acres. All models offer high oxygen transfer with low initial and
operating costs. They are perfect for back yard ponds, golf course ponds, retention ponds, and
ornamental ponds. Fountains offer the same benefits of aeration while providing an attractive
display, are ideal for ponds in the public eye. Easy to install by one person
Product Features
• NEW oil free design - no chance of oil
leaks polluting our environment.
• High efficiency motor and high performance
propeller - give the most flow for your energy dollar.
• Up to 50% more energy efficient than
oil filled brands - costs less to operate.
• Continuous duty 120v or 240v single phase motors can run non-stop for years without maintenance &
are rugged enough for fish farming.
• Molded glass filled nylon shroud - guides
water flow, protects fish.
• Stainless Steel motor shaft and motor
housing - eliminates corrosion.
• Dual internal seals and double lip shaft
seal - keep water and dirt out for long life.
• Standard 50’ or 100’ field replaceable power cords get you to the middle of pond without modification.
• Designed for harsh saltwater environment with
renewable zinc anode for corrosion protection thrives in salt or mineral filled water.
Complete line of accessories
also available!
Fountains
Aerators
Stock No.
Description
Stock No.
Description
#6305D-50
1/2 HP w/float 50' ac cord, 115v/60Hz
#6315D-50
1/2 HP w/float, fountain kit 50' ac cord, 115v/60Hz
#6305D-100
#6315D-100
#6308D-50
#6318D-50
#6308D-100
#6318D-100
#6310D-50
1 HP w/float 50' ac cord, 115v/60Hz
#6319D-50
1 HP w/float, fountain kit 50' ac cord, 115v/60Hz
#6310D-100
1 HP w/float 100' ac cord, 115v/60Hz
#6319D-100
1 HP w/float, fountain kit 100' ac cord, 115v/60Hz
#6311D-50
1 HP w/float 50' ac cord, 230v/50/60Hz
#6320D-50
1 HP w/float, fountain kit 50' ac cord, 230v/50/60Hz
#6311D-100
#6320D-100
#6312D-50
#6321D-50
#6321D-100
#6312D-100
Sto-Away™ Seat
• Unique crook hook
to hang
seat up!
• Polyester Covering is
strong and easy to clean!
• Foam filling (polyurethane)
allows the seat to float!
• Fold in half, or lays flat
to fit your storage needs!
• Galvanized
steel frame
• Adjustable locking hinge allows you to
choose from several comfortable positions!
• Soft padded seat for lounging, reclining and relaxing.
2 Available
Colors
• Protection from sand, debris and hard decks/docks.
Navy Blue
#99104
74
The comfortable seat that
Sto’s Away when not in use!
Pacif ic Blue
#99105
• Great for sailboats, cuddy cabins, concerts, picnics,
tanning, beaches, and so much more.
Custom Replacement Carpet
Snap-In Replacement Carpet
The Cockpit Kit by Taylor Made makes custom fit carpet a snap! Our
custom cut carpets are constructed with a tough rubber backing which
can be cut to virtually any shape or size. Our carpet is designed to brave
the sea, sun, and salt so you can be sure it’s tough!
With our custom carpet replacement you can:
• Replace old shabby snap-down carpet
• Carpet an area that was never carpeted previously
• Design a custom mat or runner to protect high traffic areas.
Carpet Colors:
Stock No.
Description
#44160
Carpet Cockpit Template Kit
#44170-000
Cockpit Carpet - Cut Pile
#44180-000
Cockpit Carpet - Berber
Our Carpet is
Computer Cut,
Precision Bound and
Digitally Archived
Replace your carpet in 5 easy steps!
1. Order the Custom Template Cockpit kit.
2. Measure your existing carpet:
• Trace your carpet on template supplied in kit.
• Choose the color and style of carpet.
3. Send Template and carpet choice into factory.
4. Receive a quote back and place order.
5. Receive your custom made carpet, add snaps with included snap
fastener kit, and install in your boat.
75
Flags & Ensigns
50 Star Flag
Stock No.
#8418
#8424
#8430
#8436
Size
12" x 18"
16" x 24"
20" x 30"
24" x 36"
Stock No.
#8448
#8460
#8472
#8496
U.S. Power Squadron Ensign
U.S. Yacht Ensign
Stock No.
#8118
#8124
#8130
#8136
Size
30" x 48"
36" x 60"
48" x 72"
60" x 96"
Size
12" x 18"
16" x 24"
20" x 30"
24" x 36"
Stock No.
#8148
#8160
#8172
Size
30" x 48"
36" x 60"
48" x 72"
Stock No.
#8218
#8224
#8230
Size
12" x 18"
16" x 24"
20" x 30"
Stock No.
#8236
Size
24" x 36
(For use by members only)
Nylon Ensigns Perma-print dyed nylon with reinforced nylon heading.
U.S. Yacht Ensign
50 Star Flag
Stock No.
#2418
#2424
Size
12" x 18"
16" x 24"
Stock No.
#1118
Size
12" x 18"
U.S. Coast Guard Auxiliary
Stock No.
#5018
#93068
Size
12" x 18"
16" x 24"
Confederate Ensign
Stock No.
#1418
#1424
Size
12" x 18"
16" x 24"
Military Flags - Measure 12” x 18” with brass grommets. Screen printed on our vibrant bright nylon colors. Flag colors may very.
#5620 Army Flag
#5621 Navy Flag
#5622 Air Force Flag
#5626 US Coast Guard
#5624 POW/MIA Flag
#5623 Marines Flag
#5627 Army National Guard
Decorative String of International Code Signals
Stars & Stripes Windsock
Decorate your sailboat with a variety of code flags. Each set is different from
the next. Contains 12 different international code flags and is 30’ long.
Flags measure 12" x 18".
Made from 100% woven
polyester with beautifully
printed white stars.
76
Stock No.
#93244
Size
48" Long
Stock No. #93302
Nautical Flags
12” x 18”
Nylon Officers Flags
All Officer Flags are polyester with embroidered symbols
and measure 12" x 18"
#93076 Commo dore
#93077 Vice-Commodore
#93078 Rear Commodore
#93080 Treasurer
#93081 Secretary
#93079 Fleet Captain
Stock No. #93245 Set - (36) 12" x 18" Signal Flags
Stock No. #93301 Set - (36) 18" x 24" Signal Flags
#93256 - (A)
#93257 - (B)
#93258 - (C)
#93259 - (D)
#93260 - (E)
#93261 - (F)
#93262 - (G)
#93263 - (H)
#93264 - (I)
#93265 - (J)
#93266 - (K)
#93267 - (L)
#93268 - (M)
#93269 - (N)
#93270 - (O)
#93271 - (P)
#93272 - (Q)
#93273 - (R)
#93274 - (S)
#93275 - (T)
#93276 - (U)
#93277 - (V)
#93278 - (W)
#93279 - (X)
#93280 - (Y)
#93281 - (Z)
#93246 - (0)
#93247 - (1)
#93249 - (3)
#93250 - (4)
#93251 - (5)
#93252 - (6)
#93254 - (8)
#93255 - (9)
#93155 Port Captain
#93082 Past Commodore
International Code of Signals
All individual Code of Signal Flags are dyed polyester
and measure 12" x 18"
#93248 - (2)
Alpha Dive Flag
Traditional Diver Down Flag
Skier Down Flag
For any small craft that is
restricted in its ability to
maneuver while engaged
in diving. 15" x 15" with
sewn-in batten.
Some states require that this flag be
displayed in diving areas. Vinyl
glo-flame red flag with white diagonal
stripe. Plastic stiffener for holding
flag up on calm days.
Stock No.
Stock No.
Stock No.
12"x 18"
Solid Color
Nylon Flags
Stock No.
#32181
#32183
#32184
#32185
#93253 - (7)
Color
Blue (Absent Flag)
Red (Protest Flag)
White (Dinner Flag)
Yellow (Quarantine Flag)
#4400
#4200 - 13" x 15"
#93173 - 20" x 30"
12" x 18" in size, these
fluorescent orange flags,
pre-mounted on a wooden
pole, come ready to go.
These flags comply with
most western state water
skiing safety regulations.
Storm Warning Flags
Stock No.
#1938
#93174
Description
18"x18" Hurricane Flag
Storm Flag Set - (2) 18" x18" Hurricane Flag
(2) 18"x36" Gale Pennant
#93978
18" Pole Size
#93986
Jet Ski/Skier Down Flag
77
Specialty Flags & Hats
Fisherman’s Catch Flags
All flags measure
12" x 18" with brass
grommets. Flag colors
may vary from what is
shown here.
#4318 Albacore
#2918 Blue Marlin
#3518 King Mackerel
#3218 Shark
#2718 Tarpon
#2518 Bluefish
#4418 Swordfish
#3118 Tuna
#3318 Salmon
#3018 White Marlin
#4118 Wahoo
#4218 Dolphin
#2618 Striper
#2818 Sailfish
#4518 Pickerel
#5218 Crappie
#4618 Walleye
#420 Tag Pennant
9-1/4" x 13-1/2"
#1937 Release Pennant
5-1/2" x 8-1/2"
Flags & Hats
Pirate flags measure 12" x 18" with brass grommets. 200 denier, 2 sided screen printed nylon with your favorite graphic. Colors may vary.
#1798 Happy Hour Pirate
#1803 Prepare to be Boarded
#1799 Pirate Crew
#1800 Pirate for Life
#1804 Time Flies When
Your Having Rum
#1805 Surrender the Booty
#1801 Pirate Girl
#1806 Fish or Cut Bait
#1802 What Happens on
Board Stays on Board
#1807 One Eyed Jack
All hats are embroidered
on six-panel unstructured
quality brushed cotton
caps with buckle closure.
Colors may vary.
Pirate Heads is a registered
trademark of Flappin’ Flags
78
#1808 Pirate for Life
#1809 Pirate Girl
#1810 Surrender
the Booty
#1811 Prepare to
be Boarded
#1812 Time Flies When
Your Having Rum
Novelty Flags & Pennants
All novelty flags measure 12" x 18" (unless otherwise noted) with brass grommets.
#1718 Skunk
#3718 I Love Fishing
#1817 Cat On Board
#3418 Whale
#1813 Blackbeard
#2218 I Love Boating
#9818 Margarita Time
#9118 Cocktail
#9218 Beer
#1814 Calico Jack
#1818 Jolly Roger
#1816 Old Sailors
#5618 Crab
#5118 Wine Glasses
#2019 The Most Toys
Novelty Pennants
200 denier nylon silk screened with your favorite
graphic. Colors shown here are not necessarily
indicative of actual pennant colors. All pennants are
10" x 16", unless otherwise noted.
Solid Colors
#4201 Solid Red
#4202 Solid White
#4203 Solid Blue
#270 Anchor
#240 Jolly Roger
#230 Skunk
#490 Beer
#480 Cocktail
#440 Ball & Chain
Custom
Flags
We make custom flags, pennants,
and burgees to your specifications. Minimum quantity is 50.
Just send us a sketch, layout, or
sample, and we will quote a
price. (We do require camera
ready artwork.)
#5418 Happy Hour
#290 Wheel
#320 I Love Boating
#330 I Love Fishing
#280 Mermaid
#260 Coffee
#1815 Calico Jack
Measures 12" x 36"
Decorative Pennant String
Initial
Pennants
Black letters
on white
nylon.
Stock No.
NOTE:
#1819
#333
Specify letter by its numerical
order in the alphabet.
Example:
Available in 2 different lengths. 30’ pennant
string comes with a variety of graphics on
each, while the 50’ string comes in (6) different solid colors. Pennants are plastic coated and measure 12" x 18".
#333 0 9 is letter I
Stock No. #4283 - 30 ft.
#93172 - 50 ft.
Thanks for the Wake,
You Jerk!
Show those inconsiderate boaters
what you think! Flag is 21" x 25".
Wooden Poles are 36" long.
79
U.S. State & Territory Flags
80
#93089 Alabama
#93137 Alaska
#93090 Arizona
#93091 Arkansas
#93092 California
#93093 Colorado
#93094 Connecticut
#93095 Delaware
#93096 Florida
93097 Georgia
#93138 Hawaii
#93098 Idaho
#93099 Illinois
#93100 Indiana
#93101 Iowa
#93102 Kansas
#93103 Kentucky
#93104 Louisiana
#93105 Maine
#93106 Maryland
#93107 Massachusetts
#93108 Michigan
#93109 Minnesota
#93110 Mississippi
#93111 Missouri
#93112 Montana
#93113 Nebraska
#93114 Nevada
#93117 New Mexico
#93118 New York
#93119 North Carolina
#93120 North Dakota
#93121 Ohio
#93122 Oklahoma
#93123 Oregon
#93124 Pennsylvania
#93125 Rhode Island
#93126 South Carolina
#93127 South Dakota
#93128 Tennessee
#93143 Texas
#93130 Utah
#93131 Vermont
#93132 Virginia
#93133 Washington
#93134 West Virginia
#93135 Wisconsin
#93136 Wyoming
#93219 Guam
#93085 Puerto Rico
#93084 U.S. Virgin Island
#93086 District of Columbia
#93115 New Hampshire
#93116 New Jersey
International Flags
All flags available in our vibrant bright nylon colors. These beauties add an international flair to any boat.
#93220 Anguilla
#93175 Antigua
Courtesy*
#93176 Argentina*
#93152 Aruba
Courtesy*
#93177 Australia*
#2018 Bahamas
Courtesy
#93179 Belize
Courtesy
#93153 Bermuda
Courtesy*
#93147 Brazil
Courtesy*
#93071 British Virgin
Island Courtesy
#1319 Canada*
#93181 Cayman
Island Courtesy*
#93182 Chile Crtsy.*
#93183 Columbia
Courtesy*
#93072 Costa Rica
Courtesy.*
#93141 Cuba
Courtesy*
#93184 Curacao
Courtesy*
#93221 Denmark
#93186 Dominica
#93070 Dominican
Republic Courtesy*
#93187 Ecuador*
#93188 El Salvador
Courtesy.
#93222 Finland
#93088 France
#93242 Germany
#93224 Gibraltar
#93297 Greece
#93189 Grenada
#93148 Guatemala
#93190 Haiti Civil
#93191 Honduras
#93083 Ireland
#93075 Italy
#93069 Jamaica
Courtesy*
#93240 Japan*
#93194 Martinique
Courtesy*
#93140 Mexico
#93225 Netherlands
#93195 Netherlands
Courtesy*
#93196 New Zealand
#93149 Nicaragua
Courtesy*
#93226 Norway
#93150 Panama
Courtesy*
#93198 Peru
#93239 Poland
#93233 Poland
w/Eagle
#93227 Portugal
#93085 Puerto Rico
#93241 St. Andrews
Cross - Scotland
#93228 Solomon
Island
#93238 Spain/Civil
#93199 St. Kitts
Courtesy
#93200 St. Lucia
Courtesy
#93201 St. Maarten
Courtesy
#93209 St. Vincent
Courtesy*
#93243 Sweden
#93236 Scotland
Rampant Lion
#93237 Switzerland
#93232 Tahiti
#93229 Thailand
#93202 Trinidad
Courtesy
#93230 Turkey
#93073 Barbados*
All World flags measure 12" x 18"
with brass grommets. Flag colors may
vary from what is shown here.
#93203 Turks/Caicos
Courtesy*
#93154 UK Merchant
Courtesy*
#93231 Vanuatu
#93151 Venezuela
Courtesy*
#93234 Wales
* Available in other sizes by special
order.
81
Flag Poles & Accessories
Yacht Bag
Flag Pole with
Charlevoix Flag Clips
®
• Clips are designed to clamp
tight or spin around the pole.
• Bottom clip and O-ring can be
moved to accommodate any size
flag.
• Marine grade 3/4" diameter
ano dized aluminum with nylon
flag clips.
Screws not included.
Show your pride in being an American boater with a
yacht
bag. We use the same red and white nylon that we use in our flags for these
Stock No.
bags. The stars and U.S. Yacht Ensign design are embroidered on the Duffel.
Size
The bag is lined for added durability and has a non-corrosive plastic zipper for
#915
18" flag staff
trouble free use in the marine environment. The bag has two hand straps and
#916
24" flag staff
a shoulder strap.
#917
30" flag staff
Stock No.
Description
#918
36" flag staff
#92603
Yacht bag, 11" diameter by 23" long
#919
48" flag staff
Skipper
Flag Clips
Charlevoix® Flag
Clips
Charlevoix® Burgee and
Antenna Clips
Stainless Steel Skipper Clips provide an easy way of
attaching flags, canopies, curtains etc. The extended
length of these versatile clips reaches grommets 3/4”
from fabric edges. Package includes (4) Skipper Clips
and self-tapping screw eyes for attachment to wood,
metal or fiberglass.
The original Charlevoix Flag Clip ends the trouble
of attaching your flag to a standard flag or stern light
pole. T his simple one-piece clip attaches semipermanently to your pole and will keep your flag
securely in place at speeds up to 50 miles per hour.
Flags can be attached or removed in seconds. The
clips can also be removed, if desired. Sold in pairs
Like Charlevoix Flag Clips, these Burgee &
Antenna Clips are designed to allow you to
fly your burgee or courtesy flag from your
antenna without fear of losing it. These clips
fit standard 1/2" burgee poles or 1/2" whip
antennae. Neoprene is provided for use with
poles on antennae smaller than 1/2".
Stock No.
Description
Stock No.
Description
#57926
One-piece flag clip fits 3/4" pole
Stock No.
Description
#57933
Skipper Clips w/screw eyes (4 pk.)
#57928
Fits 7/8" to 1" flag pole
#57925
Pole/antenna flag clip
Chromed Flag Pole
Sockets
Triple chrome plated with
3/4" and 1" inside diameter.
® Charlevoix is a registered trademark of Martone Marine Products, Inc.
82
Stock No.
I.D. Size
Style
#953
3/4"
Slanted
#954
3/4"
Straight
#962
1"
Slanted
#963
1"
Straight
Flag Poles & Accessories
Stainless Steel Flag Poles
This deluxe flag pole set features highly
polished stainless steel from top to bottom.
The staff is made from 1” 304 stainless steel.
The finial and base are cast 304 stainless
steel. The unique flag clips are cast from 304
stainless steel which holds your flag taut so
your flag is never tangled.
Be Proud! Fly the Best!
Top Mount Flag
Pole Socket
Pole
Recommended
Length
Flag Size
#902
18"
12" x 18"
#903
24"
16" x 24"
#960
7/8" - 1" rails
1-1/8" - 1-1/4" rails
#904
30"
24" x 36"
#905
36"
30" x 48"
#973
7/8" - 1" rails, 1" Flag Staff
#907
48"
36" x 60"
#974
7/8" - 1" rails, 1/2" Flag Staff
Flush Mount Flag
Pole Socket
• 10 degree angle
• Insets nearly flush to the deck.
Fits
1" poles
#966
1-1/4" poles
Rail Mount Flag
Socket
Rail Mount
Pulpit Staff
• Mounts to 7/8"
to 1 1/4" rails.
• T304 stainless
steel.
• Adjusts to any
angle.
• Mounts to 7/8"
to 1 1/4" rails.
• T304 stainless
steel.
• Complete with
split rings.
• Round rails only
• Round rails only
Stock No.
Stock No.
#967
Fits 1-1/4" poles
Developed with the Pontoon Boater in
mind, this new injection molded, black
nylon mount attaches easily to the top of
your pontoon railing and features a 10
degree presentation angle. The 3/4”
diameter bright dipped anodized aluminum
pole simply snaps into the base and features
color matched Charlevoix flag clips. The
24” model includes a 12”x18” sewn US
Flag. The 30” comes complete with a
16”x24” sewn US Flag.
Description
#971
15" long with
nylon rail clamp
• 60 degree angle
Pontoon Flag Pole Socket with Flag
Stock No.
Stock No. Fits
#961
• Made from beautiful long lasting
T316 polished stainless steel.
#965
Designed to securely fasten to either
7/8" - 1" or 1-1/8" - 1-1/4" rails, these
stainless steel mounts will look great
and provide years of service. Both
models are perpendicular to the rail
and are made for 1" diameter flag
poles.
Stock No.
• Made from beautiful long lasting
T316 polished stainless steel.
Stock No.
Stainless Steel Rail Mount
Flag Pole Sockets
Stock No. #968 Fits 3/4" to 7/8" poles
Classic Wooden
Flag Poles
Solid mahogany poles with
marine finish. Available in
most popular sizes with
universal bases. Complete
with brass hooks.
Stock No.
Size
#901
18"
#921
Flag & Mount 24” 12 x 18 US
#951
24"
#922
Flag & Mount 30” 16 x 24 US
#952
30"
83
Hatches
Ultra III
gray tempered safety glass for scratch resistance and clarity. New security locking handles
with lock-in vent position. Positive lock riser arms for easy open/easy close. Pre-drilled mounting holes.
Designed as a replacement for all
and similar style hatches. Trim ring included.
Low Profile Access and
Ventilation Hatch
Stock No.
Description
Frame Size
Maximum
Hole Cut-Out
Shipping
Weight
Screen
#50101
10" x 10"
12-3/8" x 12-3/8"
9-5/8" x 9-5/8"
8 lbs.
#50102
#50103
12" x 12"
14-3/4" x 14-3/4"
12" x 12"
9 lbs.
#50104
#50105
13" x 18"
15-5/8" x 20-7/16"
12-7/8" x 17-11/16"
11 lbs.
#50106
#50107
17" x 17"
19-7/16" x 19-7/16" 16-11/16" x 16-11/16"
17 lbs.
#50108
#50109
18" x 18"
20-3/4" x 20-3/4"
18"
18 lbs.
#50110
#50111
20" x 20"
22-1/2" x 22-1/2"
19-3/4" x 19-3/4"
19 lbs.
#50112
Screens sold separately.
Portlights
Vantage Low Profile
Opening Portlight
Shock resistant 1/4" thick acrylic
window. Lightweight aluminum
construction with no externally
exposed seams or fasteners.
Designed as a replacement for
all
and similar
style portlights.
VANTAGE
Stock No.
Description
Frame Size
Maximum
Hole Cut-Out
Shipping
Weight
#50039
5" x 10"
7-1/2" x 12-1/2"
6-3/4" x 11-3/4"
2 lbs.
#50040
5" x 12"
7-1/2" x 14-1/2"
6-3/4" x 13-3/4"
2 lbs.
#50041
5" x 15"
7-1/2" x 17-1/2"
6-3/4" x 16-3/4"
3 lbs.
#50042
5" x 23"
7-1/2" x 25-1/2"
6-3/4" x 24-3/4"
3 lbs.
Hatch Replacement Parts – Model Years 1990 to Present
A
H
D
F
E
B
G
I
C
A
B
C
C
D
D
Stock No.
Description
Quantity
#1731 1994-Present handle w/post, “O” rings, lock, screw
One
#1724
Hatch riser arm for 10" x 10" hatch
One
#1723
One
#1728
One
#1729
One
#1730
One
D
E
F
G
H
I
Stock No.
#1722
#1727
#1721
#1720
#1725
#1726
Description
Quantity
One
1994- Present exterior latching handles
Pair
Hatch riser arm locking knob
One
1990- 1993 Handle w/post, “O” rings, screw
One
“D” sponge gasket
7'
Installation foam 1/4" x 1/2"
8'
Items A & E are for model years 1994-Present only. Item G is for model years 1990-1993 only.
All hatch riser arms and handles are universal and can be used on the left or right side.
84
Windshield Accessories
Windshield Support Bars
RainBreaker® Glass Treatment
• Improves Vision
• Durable Performance
• Promotes Safety
Stock No.
Size
#1632
11"
#1634
12"
from either anodized aluminum
#1636
13"
tubing with nylon fittings or pow-
#1637*
13"
der coat aluminum tubing with
#1638
14"
chrome plated zamak feet*. The
#1639*
14"
#1641*
15"
#1642*
16"
Used as original equipment on
many fine walk-thru windshields.
Windshield support bars are made
fittings allow for pivot in almost
every direction for easy installation. Sold in single units.
Top-Lok Stainless Steel
• Repels Rain, Sleet
• Advanced, Patented Formula
Treated
Untreated
This product is designed for professional use on windshields, side windows, rear windows,
hatches, portholes, glass mirrors, or any other glass surface where water or bugs make it
difficult to see. Rainbreaker Glass Treatment provides better vision for the boater during
bad weather.
Stock No.
Adjustable Side Vent Handle
For heavy 1" round
trim.
Stud portion affixed.
#13000
Hidden Hold-Down
Fasteners
Window Savers
For 3/4" and 7/8" trim.
Stud portion affixed.
Design ed to replace most original
Stock No.
Description
h an dles on side vent win dows. Easy
#1348
3/4" – 4 per pack
installation. Designed to fit side windows
Complete with nuts and rubber
#101348
3/4" – Bulk pack of 100
having exactly 1/4" mounting hole.
grommets.
#1344
7/8" – 4 per pack
Stock No.
#101344
7/8" – Bulk pack of 100
#11616 (Sold in pairs – left & right)
Turn Latch
Door Catches
Utility Latch
• Designed to clip
onto 7/8" or 1"
tubing and hold
your enclosures
away.
• Stops plastic
windows from
getting burned
by hot tubing.
#11747
Fits 7/8" tubing
#11748
Fits 1" tubing
Door Pads
For walk-thru windshields and other
Adhesive-backed rubber, 3/4" x
Easy to install latch for hatches,
A simple twist latch for securing
doors. Holds door firmly in place
3/4", gives protection when on
windows, doors and other applications.
walk-thru windshields or other hatch
against vibration and motion. Black
windshield doors.
Rugged nylon complete with mounting
openings. Black thermoplastic complete
thermoplastic, consisting of ball stud,
screws. (sold in pairs)
with self-tapping screws.
catch, and screws.
Stock No.
#551
Stock No.
#1163 (1 set)
Stock No.
#1167 (2 per pack)
White Twin-Flap Vinyl Deck Channel
Windshield Screw Cover Foam
Foam Tape
Punched to accommodate hidden fasteners or
Our PVC self adhering based foam has been used
Adhesive-backed vinyl, 1/4" x 3/4", provides seal
external angles. 1/4" wide and 5/8" high.
on many fine original equipment windshields.
between windshield bottom and boat deck, or
Stock No. Size
other boat sealing jobs.
Stock No.
Length
#826500
110"
#1630
6' roll (1/2" x 3/4")
#1631
8' roll (5/8" x 1-1/4")
Stock No.
#1166 (35' roll)
85
Dealer Merchandisers
Bimini Top
Accessory Set
#200010
Stock No.
Quantity/Description
#11707
2 - 7/8"Black External Eye End
#11708
2 - 7/8" White External Eye End
#11729
2 - 7/8" S.S. External Eye End
#11730
2 - 1" S.S. External Eye End
#11711
2 - 7/8" Black Jaw Slide
#11712
2 - 7/8" White Jaw Slide
#11731
2 - 7/8" Stainless Steel Jaw Slide
#11750
2 - 1" S.S. Rail Clamp Jaw Slide
#11717
2 - Black Deck Hinge
#11718
2 - White Deck Hinge
#11733
2 - Stainless Steel Deck Hinge
#11227
2 - Stainless Steel Pull Pin
#11703
2 - 7/8"Blk Internal Eye End
#11736
4 - Blk Deck Hinge Thumb Screw
#11713
4 - Black Eye Strap
#1227
4 - Stainless Steel Eye Strap
#1340
4 - Stainless Steel Dog Snap
Pontoon Rail
Fender Adjuster #11391
Big B™ CRT
Fender Hanger #11085
Countertop Merchandiser
Contains: 36 #1139 Fender adjusters.
Countertop Display
Contains: 36 #1085 Hangers
LED Stick-On
Boat Cover Accessory Set #200016 Pushlight Display #LSPWD
Clothes Claws ™ Boaters’
Clothespin Display #1651
Stock No.
#935
4 - Bow Sockets
#936
2 - Rail Bow Sockets
Contains: 48 #1650 Clothes Claw™
Boaters’ Clothespin
#55741
2 - Boat Cover Support System
#55742
2 - Quick-on Tie Down Kit
#1365
1 - E-Z Grommet Set
#1231
2 - Brass Grommets
#1360
2 - Snap Fastener Installation Tool
#401
2 - Snap Fastener-Female for fabric Install.
#402
2 - Snap Fastener-Male w/self tap screw
#406
6 - Stretch-A-Snap
Contains: 10 #LSPW
LED Stick-On Pushlights.
Fender Accessory Set #200014
Stock No.
#1005
3 - Hand Pump
#1010
6 - Stainless Steel Fender Lock
#1009
6 - Extra Fender Lock Peg
#1015
6 - Tidy-Up Adjuster - White
#1017
2 - Tidy-Up Adjuster - Blue
#1108
3 - Rail Fender Hanger
Flag Accessory Set #200015
86
Stock No.
#57926
2 - Charlevoix Flag Clip - 3/4" poles
#57997
2 - Vinyl Covered Flag Clips
#916
2 - 24" Aluminum Flag Pole w/Clips
#953
2 - 3/4" Flag Pole Socket-Chromed Zamak
#2418
2 - 12" x 18" US Flag
#2424
2 - 16" x 24" US Flag
#9118
2 - 12" x 18" Cocktail Flag
#9218
2 - 12" x 18" Beer Flag
#1818
2 - 12" x 18" Jolly Roger Flag
Fender-Lock Set #91010
Skipper Clips #2949
Stand-up countertop card.
Contains: 12 #1010 Sets.
Stand-up countertop card.
Contains: 24 #57933 Sets.
Dealer Merchandisers
Let Taylor Made Products help you increase your sales and utilize valuable floor space by merchandising and displaying our most popular products
in these attractive floor displays!
#200020 U.S. Flag
Merchandiser
#200019 Yacht Bag
Merchandiser
#200025 Bazooka
Bailer Merchandiser
#200028 Pirate Heads®
Pirate Flag Merchandiser
This convenient display holds 48 of
our most popular U.S. Flags, both
sewn and printed versions. Display
foot print is 12"x12", with an over-all
dimension of
21"W x 55.5"H
x 15"D. Display
includes a fourcolor header, 48
flags, and directions for easy
set-up. Ships in
a
one-piece
carton.
This attractive display contains
18 of our ever-popular, tremendously handy Yacht Bags.
Display foot print is 15" wide by
18.75" deep, with an over-all
dimension of 19.5" W x 57"H x
22.5"D. Includes a four-color
header, 18 yacht bags, and
instructions
for easy setup. Ships in
a one-piece
carton.
This free standing corrugated
display contains four units of
both available sizes. Display
comes
pre-merchandised
with large 4C POP signage.
B a s e
measures
24"x12"x
60" high.
This convenient display holds 4 each
of our most popular
12” x 18” Pirate
Flags. Display foot
print is 12"x12",
with an over-all
dimension of 21"W
x 55.5"H x 15"D.
Display includes a
four-color header,
48 flags, and directions for easy
set-up. Ships in a
pre-merchandised
one-piece carton.
Stock No. Quantity/Description
#1800
4-Pirate for Life Flag
#1801
4-Pirate Girl Flag
#1803
4-Prepare to be Boarded Flag
#2418
16 - 12" x 18" U.S. Flag/Printed
#1804
4-Time Flies When Having Rum
#8418
16- 12" x 18" U.S. Flag/Sewn
#1805
4-Surrender the Booty Flag
#2424
8 - 16" x 24" U.S. Flag/Printed
Stock No.
#18548
4 -5 ft. Bailer
#1806
4-Fish or Cut Bait Flag
#8424
8 - 16" x 24" U.S. Flag/Sewn
#92603
18 - Yacht Bags
#18549
4 - 8 ft. Bailer
#200027
(6) of each flag
Looking for the best way to display the #1 selling fenders in America without taking up limited shelf space? Taylor Made has the way! Taylor Made
Products realizes that space is always limited and extremely valuable, so we have specially designed several ways to help eliminate the problem
and increase your fender sales.
Bulk Packed
Fender Bins
Mini Fender Center
Both front and back panels
are perforated for removal.
This allows for easy access
to the fenders as the level
drops.
Fender Bin Measures:
48" Long x 23" deep x 43" tall
Stock No.
Contents
#102245
#1022/#1023 Hull Gard Fenders
#102272
#1022 Hull Gard Fenders
72
#102356
#1023 Hull Gard Fenders
56
#102574
#1025 Big B Fenders
74
#102630
#1026 Big B Fenders
#102525
#1025/#1026 Big B Fenders
Made from black powder-coated
wire, with a 1" square tube
frame and includes a smaller
four-color sizing chart for the
side of the rack. Each one of the
three shelves is adjustable to fit
taller fenders. Rack dimensions
are approximately 2’ wide x 6’
tall x 2’ deep and holds about 6
- 10 cases of fenders, depending
on the size of the fenders and
includes directions for easy
installation.
Stock No.
Quantity
#1475
45/30
30
Fitted cover insures
secure shipping of
the bin.
25/21
87
Web Services
Taylor Made Products offers an innovative selection of internet tools for our customers. These can be installed on your website to increase your
online sales while decreasing returns. We offer product selection guides for most of our major product lines (boat covers, bimini tops, and boat
fenders). In many cases, our selection guides can be installed in minutes.
Boat Cover Fit Guide
Taylor Made Products’ Online Boat Cover Fit Guide makes finding your customer’s specific boat cover fast, easy and convenient! Just answer a few quick
questions and we will find the right boat cover from our database of over 20,000
covers. All boat covers from Taylor Made Products ship within 5 days or less.
Give your customers quality made boat covers fast, with Taylor Made Products’
Online Fit Guide on your site.
Stock No.
Description
#WEB101
Boat Cover Fit Guide CD (Ver. 1.3)
Bimini Top Fit Guide
Taylor Made Products’ Online Bimini Top Fit Guide is a great solution for
helping your customers find the bimini top that’s just right for their boat.
Taylor Made Bimini BoaTops® provide lots of refreshing shade while affording
your customers visibility over their windshield instead of just through it. These
tops are freestanding, providing more air circulation, and can be mounted in
several locations on the boat. Taylor made bimini tops ship in 5 days or less.
Stock No.
Description
#WEB102
Bimini Tops Fit Guide CD (Ver. 1.2)
Boat Fender Fit Guide
Offer your customers peace of mind by knowing the fender they’ve selected is
sufficient to protect their boat. Taylor Made Products’ Online Fender Selection
Guide helps your customers pick the right fender for their boat type and
docking needs. Combined with the Taylor Made Products Lifetime Guarantee
against splitting or bursting (on select fenders), this selection guide will
convince your customers that they made the right choice in style and brand.
Stock No.
Description
#WEB103
Boat Fender Fit Guide CD (Ver. 1.2)
Taylor Made Products Online
WWW.BOATCOVERS.CC
88
WWW.BIMINITOPS.COM
WWW.BOATFENDERS.COM
WWW.TAYLORMADEPRODUCTS.COM
Warranty Information
Limited Warranty Information - Applicable to All Products
TAYLOR MADE PRODUCTS SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, NOR FOR ANY DAMAGES
O R REMEDIES NOT SPECIFICALLY SET FORTH IN THIS WARRANTY. TAYLOR MADE PRODUCTS SHALL NOT BE LIABLE, IN THE EVENT, FOR
ANY DAMAGES IN EXCESS OF THE COST OF THE PRODUCT. Some states do not allow the exclusion or limitation or consequential damages, so the above
limitation or exclusion may not apply to you.
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL NOT BE EXTENDED BEYOND THE
DURATION OF THE EXPRESS WARRANTIES HEREIN. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you.
All potentially defective products must receive a Return Goods Authorization (RGA) # before they are returned to Taylor Made Products. Products returned
without an RGA# will be refused, and the product will be returned to sender. To receive an RGA#, call us at 1-800-628-5188. All products returned to us
MUST be accompanied by a proof of purchase,
without exception. Freight on defective products is the responsibility of the consumer (UPS is the preferred method of returning a product to us). Repaired or
replacement products will be shipped back to the consumer freight prepaid.
This written warranty is the only warranty expressed or implied, made by Taylor Made Products. No person is authorized to change, add to, or create any warranty or obligation other than set forth herein. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. To
obtain service under this warranty, contact Taylor Made Products at the following address:
Taylor Made Products • 65 Harrison St. • Gloversville, NY 12078 • 518-773-9400 • www.taylormadeproducts.com • [email protected]
Freight on returned products is the responsibility of the consumer. Repaired or replacement products will be shipped back to the consumer freight prepaid.
Boat Covers and Bimini BoaTops Limited Warranty
Taylor Made Products warrants its Trailerite® boat covers and Bimini
BoaTops® to be free of defects in material and workmanship. The different
types of products, and their warranty periods, are specified below:
• Fabric discoloration or failure due to chemical exposure (includes tree sap,
bird droppings, oil, and gas).
Boat Guard Rainbreaker covers:
1-year limited warranty
• Mildew caused by dirt resting on the product, or the product being stored
while damp.
Boat Guard covers:
• Damage caused by acts of God.
Boat Guard Eclipse covers:
Boat Guard SST covers:
Trailerite® boat covers:
Trailerite® Hot Shot™ boat covers:
Bimini BoaTops®
This limited warranty pertains to defects in material and workmanship only.
Damage caused by improper use or care is not covered by this warranty.
Examples of damage that is not covered are:
• Allowing water, snow, or ice to pool or puddle on the product.
• Tears or rips caused by failure to protect the product from sharp objects.
• Wind damage due to improperly tying down of the product.
Under the terms of this warranty, any Trailerite® boat cover or Bimini
BoaTop® found to be defective will be repaired or replaced, at Taylor Made
Products’ option. If minor repairs can return the product to useful service, it
will be repaired at no charge. If the product is beyond minor repair, the cost
of replacement (a new product) will be calculated by subtracting the residual
value of the defective product from the current actual retail price for the same
item. When you call us for a Return Goods Authorization (RGA) #, we can
estimate the replacement cost of the product.
This warranty is in lieu of all warranties, express or implied, and under no circumstances shall Taylor Made Products be liable for any damages in excess of
the boat cover’s original purchase price.
Taylor Made Vinyl Fender & Vinyl Buoy Limited Warranty
“Lifetime” Limited Warranty applies to: Super Gard™, Hull Gard®, Big B™ and Survivor® fenders only.
One Year Limited Warranty applies to: Tuff End™ Fenders and Buoys, Fender Cushions™, Low Freeboard Fenders, PWC Fenders, and Transom Fenders.
All warranted replacements must meet this simple criteria: The fender has split or burst from normal use and damage is not the result of a knife cut or puncture
from a sharp object.
Taylor Made Products warrants its vinyl fenders to be free of defects in workmanship and materials under normal use and service for which the product is intended. This warranty is limited to product failure as a result of air loss from SPLITTING or BURSTING. Excluded from this warranty are fenders that have
become useless from cuts or punctures, or disfigured from continued wear or use, or products that have been exposed to solvents that degrade vinyl. Overinflation of any fender voids any warranty claim. Obligation under this warranty is limited to repair, replacement or credit of the defective fender at our discretion.
Taylor Made Products reserves the right to request return of the product for inspection. No return merchandise will be accepted without prior authorization. Taylor
Made Products shall not be liable for indirect, special, incidental, or consequential damage or penalties and does not assume liability of purchaser or others for injury
to persons or property. This warranty is in lieu of all other warranties, express or implied.
Foam Filled Mooring Buoy Limited Warranty: Flotation for 3 Years.
This product is warranted to be free of defects in materials and workmanship. The float of the buoy is warranted for three years from the date of sale: that it will
maintain its flotation when used for its intended purpose under exposure to normal sun, wind, weather, and water conditions. It is NOT warranted against acts of
vandalism. It is NOT warranted against attack by animals, birds, fish, or people. The hardware of the buoy is warranted for one year from the date of sale: that it
will maintain its structural integrity when used for its intended purpose, under normal exposure to weather and water conditions. IT IS NOT IMPLIED THAT
THIS PRODUCT WILL WITHSTAND UNUSUAL CONDITIONS SUCH AS SEVERE STORMS, SEVERE TIDES, OR HURRICANES. THE USER
SHOULD CHECK THE MOORING EVERY THREE MONTHS TO BE SURE THAT IT IS SECURE AND HAS NOT DETERIORATED TO A LEVEL
WHERE IT MAY FAIL UNDER STRESS.
A copy of the original sales receipt, documenting the date of purchase, must accompany all warranty claims. Obligation under this warranty is limited to repair,
replacement, or credit for the defective buoy at our discretion. Taylor Made Products reserves the right to request return of the product for inspection. No return
merchandise will be accepted without prior authorization. Taylor Made Products shall not be liable for indirect, special, incidental, or consequential damage or
penalties and does not assume liability of purchaser or others for injury to persons or property. This warranty is in lieu of all other warranties, express or implied.
89
TAYLOR MADE GROUP, LLC
Gloversville, New York
www.taylormadegroup.com
Tel: 518-725-0681
TAYLOR MADE PRODUCTS
Marine aftermarket products & services
Tel: 518-773-9400
TAYLOR MADE SYSTEMS
& WATER BONNET
Marine glazing systems
Kendallville, Indiana • Bradenton, Florida
www.taylormadesystems.com
Tel: 518-773-0636
AMERITEX FABRIC SYSTEMS
Engineered fabric enclosures
Bradenton, Florida
www.ameritexfabrics.com
Tel: 941-747-1900
T AY L O R M A D E G L A S S S Y S T E M S
TAY L O R M A D E G L A S S O H I O , LL C
Custom engineered glass and window systems
Payne, OH • Kendallville, Indiana
www.taylormadeglass.com
Tel: 419-263-2313
T AY L O R M A D E G L A S S & S Y S T E M S LT D
Curved & tempered glass
Templemore, County Tipperary, Ireland
www.taylormadeglass.com/templemore
Tel: 353-504-31411
T R E N D M A R I N E P R O D U C T S , LT D .
Windshield, door & roof systems
Catfield, Great Yarmouth, United Kingdom
www.trendmarine.com
Tel: 44 (0)1692-581307
T AY L O R M A D E S Y S T E M S PA C I F I C
Marine glazing systems
Auckland facility:
Papatoetoe, Auckland, New Zealand
www.taylormarine.co.nz
Tel: 0064-9-278-9816
Brisbane facility:
Brisbane, Queensland, Australia
www.taylormadesystems.com.au
Tel: 0061-7-3808-1513
T AY L O R M A D E C U S T O M P R O D U C T S
Custom & retractable awnings
www.taylormadecustomproducts.com
Tel: 518-725-2624
Over 100 years of service & innovation
www.taylormadegroup.com
Taylor Made Products
Taylor Made Group, LLC
65 Harrison Street, Gloversville, NY 12078
Tel: 518-773-9400
Fax: 518-725-4910
Taylor Made®, Taylor Made Product s®, Th e Taylor Made
Group™ and product names, as indicated, are trademarks or registered trademarks of Taylor Made Group, LLC in the United States
and in other countries. Other trademarks are property of their
respective owner.
07.10 Taylor Made Products Catalog
© 2010 Taylor Made Group, LLC

Products Catalog - Taylor Made Products

Transcription

Similar documents

We`ve recently acquired a beautiful 2005 Action Craft Newport 20

For sale is barely used 2014 Porta-Bote w/ a 2014 Suzuki 6 HP four

For Sale Classic 12 ft. Merrimack Skiff

Janmor Pegaz 737 - {ModelName} Charter Brochure

details - Jolt Trust

Sea Ray Overnighter 220

PDF

Novi Boat Broker System

Volume 2, Issue 3 - Mar 2001 - Na Hoa Holomoku of Hawaii Yacht