2014 World Congress of CIGR - 18th World Congress of CIGR
Transcription
2014 World Congress of CIGR - 18th World Congress of CIGR
FINAL PROGRAM THE 18TH WORLD CONGRESS OF CIGR AGRICULTURAL AND BIOSYSTEMS ENGINEERING UPGRADING THE QUALITY OF OUR LIFE SEPTEMBER 16TH-19TH, 2014 BEIJING, CHINA GENERAL INFORMATION VENUE China National Convention Center (CNCC) Address: No.7 Tianchen East Road, Olympic Green, Chaoyang District, Beijing 100105, China WEATHER The weather in mid-September in Beijing is comparatively moderate and the average day temperature is about 15-27ºC (55-80 ºF). ARRIVAL IN BEIJING The Congress will not arrange the pick-up services at the Beijing Capital International Airport. Participants could take the taxi, Beijing Airport Express (shuttle bus) and Beijing Subway Airport Line to CNCC and the hotels you booked. The taxi service is available at the Capital Airport during the whole day. In addition, you could take Beijing Airport Express Line 6 and get off at the station of Best Western OL Stadium Hotel. Participants can take Beijing Airport Express Line 5 and get off at the station of YA YUN CUN to arrive at Yayuncun hotel. The operation time for Beijing Airport Express Line 5 and 6 is 7:00-24:00, 8:00-21:00, and each bus will depart from the airport in every 30-40 minutes. The bus tickets are available at the Beijing Airport Express Station of the Beijing Capital International Airport Terminal 1, 2 and 3, and it will cost about RMB 20.00 Yuan (US$ 3.1) per person. For Beijing Airport Express Services, please call: +86 10 64573891 / 64594376 / 64594375. To take the Beijing Subway, please first take Beijing Subway Airport Line and transfer to Beijing Subway Line 10 at the San Yuan Qiao Station, and transfer to Line 8 at the Bei Tu Cheng Station and get off at Olympic Green Station and get out at Exit E, which is around 0.5km (0.3 mile) away from CNCC and CNCC Grand hotel. For the people who need get to other hotel or locations, please transfer to other local public transportations. The operation time for Beijing Airport Subway Line is 6:21-22:51(T3), 6:35-23:10(T2), it will cost RMB 25.00 Yuan (US$ 4.1) per person. The operation time for Beijing Subway Line 10 and Line 8 is 4:50-00:20 and 5:30-23:00, which costs RMB 2.00 Yuan (US$ 0.33) per person. For more information about Beijing Subway, please call: + 86 10 96165 9 ACCOMMODATION CNCC Grand Hotel (four-star hotel, 8 min on foot to CNCC) Building 1, No. 8 Precincts, Beichen West Road, Chaoyang District, Beijing 100105 Tel: 400 698 2008 / +86 10 84372008 Fax: +86 10 84370387 Best Western OL Stadium Hotel (four-star hotel, 15 minutes on foot and 6 min by taxi to CNCC) No. 1 Datun Road, Beishatan, Beijing 100101 Tel: +86 10 64874433 Fax: +86 10 64873545 Yayuncun Hotel (three-star hotel, 10 min by taxi to CNCC) No. 8 Beichen East Road, Chaoyang District, Beijing Tel: +86 10 64991199 7 Days Inn (express inn, 12 min by taxi to CNCC) No. 1 Beishatan, Deshengmen Wai, Chaoyang District, Beijing 100083 Tel: +86 10 64870977 INSURANCE The registration fees do not include insurance for the participants regarding accidents, sickness or loss of personal property. You are advised to make necessary arrangement for a short-term health and accident insurance before leaving your home country. CURRENCY EXCHANGE In China, only RMB is used. Exchange centers can be found at airports, hotels, banks and tourist shopping centers. The exchange rate is now about US$1.00=6.16Yuan. When changing money, you should keep your receipt in case you want to change any RMB back to foreign currency when leaving China. Credit cards (Visa, Master, American Express, Diners Club) are accepted in many department stores and hotels. It is possible to draw cash from ATM machine with credit cards. The Bank of China and the most of the hotels can cash traveler’s check issued by most foreign banks or financial institutions. You need to show your passport and bare 4% commission charge. REGISTRATION DESK The registration desk will be set up in the open place on the 1st floor near the Delegates Access Gate C2 of CNCC at the following hours: 10 15th, Sept. (Mon) 8:00-20:00 16th, Sept. (Tue) 8:00-18:00 17th, Sept. (Wed) 8:00-18:00 18th, Sept. (Thu) 8:00-18:00 Participants are requested to go to the registration desk for registration and picking up the Congress kit. SPEAKER READY ROOM A speaker ready room will be set up in the open place on the 3rd floor near the Business Center of CNCC, where participants could access the information for oral presentation schedule and relative moderator arrangement of the Congress. By using the computer in speaker ready room, participants who will give the oral lecture in each section could transfer their lecture slides to the terminal computer in their lecture room and rehearsal their slides in the Congress computer system. PRESENTATION FACILITIES Computers and projectors will be available in all Congress halls and meeting rooms. The Congress Committee recommends that oral presentations are made using Microsoft PowerPoint. SPECIAL REQUEST All the participants should set their mobile phones at vibration mode during oral presentation sessions. NAME BADGES All delegates are required to wear their issued name badges at all time as the name badge is the identification to participate scientific sessions, the opening ceremony and reception. TICKET FOR LUNCH Lunch tickets, Chinese Cultural Night tickets are available at registration. TEA AND COFFEE BREAKS Tea and coffee breaks will be served outside the Congress halls and meeting room on the 3rd and 4th floor of CNCC. MEDICAL SERVICE Sino-Japanese Friendship Hospital is located 5.8 km (3.6 miles) south of CNCC. Call the attendant of the hotel or call the staff of the Secretariat of 2014 World Congress of CIGR for assistance in case of medical needs. The telephone number of the City Emergency Center is 120. 11 POST OFFICE A nearby post office is located at No.4 East Road Kexueyuannanli. You may also leave your airmails at the Front Desks of the hotels where you put up and the hotel attendants will mail them out for you. CHINESE CULTURAL NIGHT -CHINA ICEPOWER Chinese Cultural Night will be held in the evening of 17th Sept., starting from 19:30, at Beijing Performance & Arts Centre (One block south away from CNCC), which is the big event to present the Chinese traditional culture and shows including Beijing Opera, Chinese traditional dancing, Performing Monkey Show, Chinese folk music, etc. Chinese Cultural Night is free for all the Congress participants and everyone is welcome to attend the event. 12 OPENING CEREMONY (With simultaneous translation) Time: Venue: Chair: 08:30-09:30 Sept. 16th (Tuesday), 2014 Plenary Hall B, the 4th Floor of CNCC Prof. LI Shujun, Chair of the Organizing Committee of the 18th World Congress of CIGR, President of Chinese Academy of Agricultural Mechanization Sciences (CAAMS) 08:30–08:40 Chair announces the opening of the congress and introduces the distinguished leaders and guests seated on the stage Address by Prof. Da-Wen SUN, President of CIGR Speech by Prof. LUO Xiwen, President of Chinese Society for Agricultural Machinery (CSAM) on behalf of CSAM and CSAE Address by Mr. Terry Howell, Jr., the President of American Society of Agricultural and Biological Engineers (ASABE) Address by Prof. Peter Schulze Lammers, the past president of The European Society of Agricultural Engineers (EurAgEng) Address by the leader from China Association for Science and Technology Address by a high-ranking official from the Chinese Government 08:40–08:50 08:50–08:55 08:55–09:00 09:00–09:05 09:05–09:10 09:10–09:30 09:30–09:40 Tea Break 13 PLENARY KEYNOTE SESSION (With simultaneous translation) Time: Venue: Chairs: 09:40-12:10 Sept. 16th (Tuesday), 2014 Plenary Hall B, the 4th Floor of CNCC Prof. Da-Wen SUN, President of CIGR Prof. ZHU Ming President of Chinese Association of Agricultural Engineering (CSAE), Chinese Academy of Agricultural Engineering (CAAE) 09:40–10:10 Agricultural Soil Mechanics and Management Prof. Richard John Godwin Honorary Professor of the Czech University of Life Sciences, Visiting Professor of Harper Adams University, member of Royal Academy of Engineering 10:10–10:40 Sustainable Animal Production Prof. Norman R. Scott Prof. of Cornell University, member of National Academy of Engineering, USA 10:40–11:10 Agricultural Safety and Engineering Bionics Prof. Ren Luquan Prof. of Jilin University, Academician of the Chinese Academy of Sciences 11:10–11:40 The Global Role of Agricultural Machinery Industry Dr. Hermann Garbers Chairman of VDMA (German Engineering Federation - Agricultural Machinery Division) 11:40–12:10 Progress of Agricultural Machinery Industry and Agricultural Mechanization in China Prof. LI Shujun President of Chinese Academy of Agricultural Mechanization Sciences (CAAMS), President (2010-2013) of Asian Association for Agricultural Engineering (AAAE) 14 WELCOME RECEPTION (With interpretation) Time: Venue: Chair: 19:00-21:00 Sept. 16th (Tuesday), 2014 Plenary Hall A, the 4th Floor of CNCC Prof. LI Shujun, Chair of the Organizing Committee of the 18th World Congress of CIGR, President of Chinese Academy of Agricultural Mechanization Sciences (CAAMS) 19:00–19:05 19:05–19:15 Welcome by the Chair Congratulation address by Prof. ZHU Ming, Chair of the Organizing Committee of the 18 th World Congress of CIGR, President of Chinese Academy of Agricultural Engineering (CAAE) Congratulation address by Prof. Vilas M. Salokhe, the President of Asican Association for Agricultural Engineering (AAAE) Congratulations address by the representative of the organizers of the 18th World Congress of CIGR 19:15–19:25 19:25-19:35 CHINESE CULTURAL NIGHT - CHINA ICEPOWER Time: Venue: 19:30-21:30 Sept. 17th (Wednesday), 2014 Beijing Performance & Arts Centre For the purpose of presenting the authentic Chinese culture and enriching delegates’ limited days in Beijing, a glamorous cultural night is going to be held at 19:30, Sept.17th for all the delegates of the 18th World Congress of CIGR. Please join us for this special night for free! The cultural night will be held in the Beijing Performance & Arts Centre, which is located to the south of the China National Convention Centre (CNCC), the Congress venue. After listening to the oral reports, delegates could have a nice 5-minute walk there to enjoy a memorable night. There will be amazing shows and traditional Chinese art at this night. The 2-hour performance will give you a clear picture of the typical Chinese culture. Chinese Cultural Night is sponsored by China Icepower Energy Technology Co., Ltd. 15 CLOSING CEREMONY (With interpretation) Time: Venue: Chair: 16:00-17:00 Sept. 18th (Thursday), 2014 Room 309A+B, the 3rd Floor of CNCC Prof. Tadeusz Juliszewski, Incoming President of CIGR (2015-2016) 16:00–16:05 16:05–16:20 Chair announces the start of Closing Ceremony Report on the 18th World Congress of CIGR by Prof. LI Shujun, Chair of the Organizing Committee of the 18th World Congress of CIGR, President of CAAMS Speech by Prof. Can Ertekin, Co-Chair of the Organizing Committee of the 19th World Congress of CIGR, Turkey Speech by Prof. Soren Pedersen, PPT by Dr. Morten Dam Rasmussen, Co-Chairs of the Organizing Committee of the International Conference 2016 in Aarhus, Denmark Address by Prof. Fedro Zazueta, Past President of CIGR Closing Ceremony ends 16:20–16:30 16:30–16:40 16:40–16:50 16:50–17:00 GALA DINNER (With interpretation) Time: Venue: Chair: 19:00-21:00 Sept. 18th (Thursday), 2014 Plenary Hall A, the 4th Floor of CNCC Prof. Zhu Ming, Chair of the Organizing Committee of the 18th World Congress of CIGR, President of Chinese Academy of Agricultural Engineering (CAAE) 19:00–19:10 19:10–19:25 Welcome by the Chair Addresses by the representatives of the financial supporters 16 SPECIAL PROGRAM Working Meetings of CIGR (September 15-17, 2014) Meeting of CIGR Presidium Monday, September 15, 09:00-13:30H Location: Room B210-211, No.31 Building, Chinese Academy of Agricultural Mechanization Sciences (CAAMS) (Second Floor) This is a closed meeting attended by CIGR presidium members only. Meeting of CIGR Executive Board Monday, September 15, 14:00-17:00H Location: Room A606, No.31 Building, Chinese Academy of Agricultural Mechanization Sciences (CAAMS) (Sixth Floor) This is a closed meeting attended by the members of CIGR Executive Board only. Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30H Location: Room 303A, China National Convention Center (CNCC) (Third Floor) Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30H Location: Room 402A, China National Convention Center (CNCC) (Fourth Floor) Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30H Location: Room 402B, China National Convention Center (CNCC) (Fourth Floor) Meeting of CIGR Working Group Tuesday, September 16, 10:00-11:30H Location: Room VIP3-2, China National Convention Center (CNCC) (Third Floor) Meeting of CIGR Section I Board Wednesday, September 17, 13:00-15:00H Location: Room 409, China National Convention Center (CNCC) (Third Floor) This is a closed meeting attended by the members of CIGR Section I Board only. Meeting of CIGR Section II Board Tuesday, September 16, 13:00-15:00H Location: Room 401, China National Convention Center (CNCC) (Third Floor) This is a closed meeting attended by the members of CIGR Section II Board only. 17 Meeting of CIGR Section III Board Tuesday, September 16, 13:00-15:00H Location: Room 402B, China National Convention Center (CNCC) (Fourth Floor) This is a closed meeting attended by the members of CIGR Section III Board only. Meeting of CIGR Section IV Board Tuesday, September 16, 13:00-15:00H Location: Room 402A, China National Convention Center (CNCC) (Fourth Floor) This is a closed meeting attended by the members of CIGR Section IV Board only. Meeting of CIGR Section V Board Tuesday, September 16, 13:00-15:00H Location: Room 303A, China National Convention Center (CNCC) (Third Floor) This is a closed meeting attended by the members of CIGR Section V Board only. Meeting of CIGR Section VI Board Tuesday, September 16, 13:00-15:00H Location: Room 303B, China National Convention Center (CNCC) (Third Floor) This is a closed meeting attended by the members of CIGR Section VI Board only. Meeting of CIGR Section VII Board Tuesday, September 16, 13:00-15:00H Location: Room VIP3-2, China National Convention Center (CNCC) (Third Floor) This is a closed meeting attended by the members of CIGR Section VII Board only. Meeting of CIGR Journal Tuesday, September 16, 15:00-17:00H Location: Room 303A, China National Convention Center (CNCC) (Third Floor) This is an open meeting for all participants. Meeting of CIGR Technical Board Tuesday, September 16, 17:00-20:00H Location: Room 303A, China National Convention Center (CNCC) (Third Floor) This is a closed meeting attended by the members of CIGR Technical Board only. CIGR Awards Ceremony Wednesday, September 17, 16:30-17:20H Location: Room 305, China National Convention Center (CNCC) (Third Floor) Meeting of CIGR General Assembly Wednesday, September 17, 17:30-19:00H Location: Room 305, China National Convention Center (CNCC) (Third Floor) This is a closed meeting attended by CIGR members only. 18 OVERVIEW OF CIGR WORKING MEETINGS AT THE 18th WORLD CONGRESS OF CIGR Date Time Meeting 09:00-13:30 CIGR Presidium meeting Location: Room B210-211, No. 31 Building, CAAMS 14:00-17:00 Executive Board meeting Location: Room A606, No. 31 Building, CAAMS 15-Sept. Working Group meeting Location: Room 303A, CNCC 10:00-11:30 Working Group meeting Location: Room 303B, CNCC Working Group meeting Location:Room 305, CNCC Working Group meeting Location: Room VIP3-2, CNCC Section Board II meeting Location: Room 406, CNCC Section Board III meeting Location: Room 407, CNCC 16-Sept. 13:00-15:00 Section Board IV meeting Location: Room 305, CNCC Section Board V meeting Location: Room 303A, CNCC Section Board VI meeting Location: Room 303B, CNCC Section Board VII meeting Location: Room VIP3-2, CNCC 17-Sept. 15:00-17:00 Journal Meeting Location: Room 303B, CNCC 17:00-20:00 Technical Board meeting Location: Room 303B, CNCC 13:00-15:00 Section Board I meeting Location: Room 409, CNCC 16:30-17:20 CIGR Awards Ceremony Location: Room 309A, CNCC 17:30-19:00 CIGR General Assembly Location: Room 305, CNCC 19 THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION I LAND AND WATER ENGINEERING SPECIAL SESSION: CHINA-US WATER-SAVING TECHNOLOGY FLAGSHIP PROJECT WORKSHOP SESSION II FARM BUILDINGS, EQUIPMENT, STRUCTURES AND ENVIRONMENT SESSION III EQUIPMENT ENGINEERING FOR PLANTS SESSION IV ENERGY IN AGRICULTURE SESSION V MANAGEMENT, ERGONOMICS AND SYSTEMS ENGINEERING SESSION VI POSTHARVEST TECHNOLOGY AND PROCESS ENGINEERING SPECIAL SESSION: RESEARCH AND DEVELOPMENT OF PLANT RESOURCES SESSION VII INFORMATION SYSTEMS SESSION VIII AGRICULTURAL MACHINERY STANDARDIZATION SESSION IX ASIA FORUM 20 THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION I LAND AND WATER ENGINEERING 21 22 Wednesday, Sept. 17 Tuesday, Sept. 16 Monday, Sept. 15 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC Lunch Location:Plenary Hall A, CNCC Keynote Speeches & Technical Oral Presentation Location: 306A+B,CNCC Tea Break Keynote Speeches & Technical Oral Presentation Location: 306A+B,CNCC Welcome Reception Location:Plenary Hall A, CNCC 09:40-12:10 12:10-13:30 13:30-15:00 15:00-15:15 15:15-17:00 19:00-21:00 12:00-13:30 10:15-12:00 10:00-10:15 Keynote Speeches & Technical Oral Presentation Location: 303A+B,CNCC Lunch Location:Plenary Hall A, CNCC The Sino-US Water Saving Technology Flagship Project orkshop Location: 305,CNCC Tea Break The Sino-US Water Saving Technology Flagship Project orkshop Location: 305,CNCC Tea Break 09:30-09:40 Keynote Speeches & Technical Oral Presentation Location: 303A+B,CNCC Opening Ceremony Location:Plenary Hall B, CNCC 08:30-09:30 08:30-10:00 Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:00-20:00 Overview of Session I: Land and Water Engineering 23 Friday, Sept. 19 Thursday, Sept. 18 Wednesday, Sept. 17 The Sino-US Water Saving Technology Flagship Project Workshop Location: 305,CNCC The Sino-US Water Saving Technology Flagship Project Workshop Location: 305,CNCC 08:00-15:00 Technical Tours Gala Dinner Location:Plenary Hall A, CNCC 19:00-21:00 Tea Break Technical Oral Presentation Location:303B,CNCC Lunch Location:Plenary Hall A, CNCC Technical Oral Presentation Location: 303B,CNCC Tea Break Technical Oral Presentation Location: 303B,CNCC Chinese Cultural Night Location:Beijing Performance & Arts Centre The Sino-US Water Saving Technology Flagship Project orkshop Location: 305,CNCC Tea Break The Sino-US Water Saving Technology Flagship Project Workshop Location: 305,CNCC Closing Ceremony Location:309A, CNCC Technical Oral Presentation Location: 303A,CNCC Technical Oral Presentation Location: 303A,CNCC Technical Oral Presentation Location: 303A,CNCC Technical Oral Presentation Location: 303A,CNCC Technical Oral Presentation Location: 303A+B,CNCC Keynote Speeches & Technical Oral Presentation Location: 303A+B,CNCC 16:00-17:00 15:15-16:00 15:00-15:15 13:30-15:00 12:00-13:30 10:15-12:00 10:00-10:15 08:30-10:00 19:30-21:30 15:15-17:00 15:00-15:15 13:30-15:00 SESSION I LAND AND WATER ENGINEERING 18TH WORLD CONGRESS OF CIGR ORAL PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-17:00 Location: Room 306 A-B, the 3rd Floor of CNCC Chairs: Prof. Luis Santos Pereira, University of Lisbon, Portugal Prof. Shaozhong Kang, China Agricultural University, China Time Paper # Technical Presentations 0826-118 Improving agricultural water use efficiency by understanding physiological mechanism Shaozhong Kang China Agricultural University, China 14:00-14:30 0826-119 Evapotranspiration, irrigation requirements and modelling: issues for agricultural water management Luis S. Pereira University of Lisbon, Portugal 14:30-14:45 2014-0524 Impact of soil variability on irrigated cotton yield Earl Vories, Ken Sudduth, W. E. “Gene” Stevens USDA- Agricultural Research Service, US 2014-1331 Parameterization and calibration of the Aquacrop model for assessing soybean biomass and yield application in the north China plain Yu Liu, Xin Yan Institute of Water Resources and Hydropower Research, China 13:30-14:00 14:45-15:00 15:00-15:15 Tea Break Location: Room 306 A-B, the 3rd Floor of CNCC Chairs: Dr. Gerrit J. Carsjens, Wageningen University, The Netherland Prof. Guanhua Huang, China Agricultural University, China 24 Time Paper # Technical Presentations 2014-1027 Assessing irrigation water management using trend analysis and autocorrelation Amadou Keita International Institute for Water and Environmental Engineering (2iE), Burkina Faso 2014-1356 Hydro-tech: an automated smart-tech decision support tool for ecoefficient irrigation management Mladen Todorovic, Vito Cantore, Erminio E. Riezzo, Vito Buono, Mario Zippitelli, Angelo Galiano, CIHEAM - Mediterranean Agronomic Institute of Bari, Italy 0826-120 Deficit irrigation for improving fruit quality and food security in arid Northwest China Taisheng Du China Agricultural University, China 0826-121 Assessment of irrigation efficiency based on remotely sensed evapotranspiration in an arid irrigation district Songhao Shang, Yuting Yang, Lei Jiang Tsinghua University, China 0826-122 Physiological parameters variations in olive tree (olea europaea l., cv. arbequina) under different irrigation regimes in Uruguay Claudio García Instituto Nacional de Investigación Agropecuaria (INIA),Uruguay 16:30-16:45 0826-123 Assessing “developing a water-saving society” policy for the Heihe river basin in China: a structural decomposition analysis approach Junguo Liu, Xu Zhao, Qingying Liu, Guodong Cheng, Honglang Xiao Beijing Forestry University, China 16:45-17:00 2014-0437 Food in space: the spatial organization of food systems Gerrit J. Carsjens Wageningen University, The Netherland 15:15-15:30 15:30-15:45 15:45-16:00 16:00-16:15 16:15-16:30 SEPTEMBER 17, 2014 WEDNESDAY MORNING 08:30-12:00 Location: Room 303 A-B, the 3rd Floor of CNCC Chairs: Prof. Tammo Steenhuis, Cornell University, USA Prof. Guanhua Huang, China Agricultural University, China 25 Time 08:30-09:00 09:00-09:15 09:15-09:30 09:30-09:45 09:45-10:00 Paper # Technical Presentations 0826-124 Is increasing irrigation efficiency a panacea for sustainable water resources management Tammo Steenhuis Cornell University, USA 0618-110 Soil water-salt management methods, agricultural utilization and vegetation construction theories under drip irrigation in saline-sodic soils Yaohu Kang, Shuqin Wan,Yanping Jiao, Junli Tan, Shuhui Liu, Ruoshui Wang, Jiaxia Sun, Tibin Zhang, Xiulong Chen, Xiaobin Li, Shufang Jiang, Wu Hu, Zheqiang Sun, Zhu Xue, Shiping Liu Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, China 0618-117 Three models for applications of drip irrigation in Hetao irrigation areas of Inner Mongolia Jian Yu, Jinzhong Yang, Kezheng Guo, Zhongyi Qu, Jigang Shi Water Resources Research Institute of Inner Mongolia, China 2014-0219 Field assessment of basin irrigation performance in Hetao, Inner Mongolia José Manuel Gonçalves, Qingfeng Miao, Haibin Shi, Luis S. Pereira University of Lisbon, Portugal 0826-125 Minimizing non-productive water use through partitioning soil evaporation from evapotranspiration in north china plain Daozhi Gong Chinese Academy of Agricultural Sciences, China 10:00-10:15 Tea Break Location: Room 303 A-B, the 3rd Floor of CNCC Chairs: Prof. Jirka Šimunek, University of California – Riverside, USA Prof. Xiaomin Mao, China Agricultural University, China Time Paper # Technical Presentations 10:15:10:45 0826-126 Modeling of vadose zone processes and applications to agricultural productivity and environmental sustainability Jirka Šimunek University of California – Riverside, USA 10:45-11:00 2014-1599 Potential water conservation using site-specific irrigation Kenneth Stone, Phil Bauer USDA- Agricultural Research Service, USA 2014-0388 Stemflow of maize and its influencing factors Haijun Liu, Liwei Zhang Beijing Normal University, China 11:00-11:15 26 2014-0971 Evaluation of water use efficiency in irrigated agriculture supported by satellite images Enrique Palacios Colegio de Postgraduados, Mexico 11:30-11:45 2014-0626 Spatial variability of seasonal ETo computed with full and reduced datasets in Inner Mongolia, China: an assessment of temperature methods Zhongyi Qu, Dongxiao Ren, D. S. Martins, Luis S. Pereira Inner Mongolia Agricultural University, China 11:45-12:00 0826-127 Field evaluation of water distribution for variable rate irrigation system Jiusheng Li, Weixia Zhao Institute of Water Resources and Hydropower Research, China 11:15-11:30 SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 13:30-17:00 Location: Room 303 A-B, the 3rd Floor of CNCC Chairs: Prof. Andrew D. Barry, Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland Prof. Yaohu Kang, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, China Time Paper # 13:30-14:00 0826-128 Source zone remediation of chlorinated solvents in groundwater Andrew D. Barry Ecole polytechnique fédérale de Lausanne (EPFL), Switzerland 2014-0257 Wastewater reuse in irrigation - treatment for antibiotic removal Isabel Maria Nunes da Rosa Dias Duarte, Maria Paula Pinto Amador, Ruben Miguel Pereira Fernandes, Maria Luísa Lopes de Castro e Brito, Mário António Vale e Pina Barreto, Maria Cristina Prudêncio Pereira Soares Escola Superior Agrária de Coimbra, Portugal 0826-129 Research progress on safe and high quality food production using reclaimed water irrigation technologies Xuebin Qi, Zongdong Huang, Ping Li, Dongmei Qiao, Wei Guo Farmland Irrigation Research Institute, Chinese Academy of Agricultural Science and the Ministry of Water Resources, China 2014-0258 Wastewater reuse in irrigation - antibiotic resistance risk Maria Paula Pinto Amador, Isabel Maria Nunes da Rosa Dias Duarte, Ruben Miguel Pereira Fernandes, Maria Luísa Lopes de Castro e Brito, Mário António Vale e Pina Barreto, Maria Cristina Prudêncio Pereira Soares Escola Superior Agrária de Coimbra, Portugal 14:00-14:15 14:15-14:30 14:30-14:45 Technical Presentations 27 14:45-15:00 2014-1219 Transportation and transformation of nitrate during surface- spreading aquifer recharge system: a laboratory soil columns experiment Weiyan Pan, Quanzhong Huang, Guanhua Huang, Xu Xu, Ziyuan Zhang, Bingqian Liu China Agricultural University, China 15:00-15:15 Tea Break Location: Room 303 A-B, the 3rd Floor of CNCC Chairs: Prof. Qiang Fu, Northeast Agricultural University, China Prof. Thomas J. Trout,USDA- Agricultural Research Service, USA Time 15:15-15:45 15:45-16:00 16:00-16:15 16:15-16:30 16:30-16:45 16:45-17:00 28 Paper # Technical Presentations 2014-1298 Technologies to manage limited irrigation water supplies and sustain irrigated agriculture Thomas J. Trout USDA- Agricultural Research Service, USA 0618-116 Evaluating the usefulness of ligand addition on phytoextraction of Cdpolluted soil using a mechanistic model Zhongbing Lin, André Schneider, Christophe Nguyen, Thibault Sterckeman Wuhan University, China 0618-105 Reclaimed municipal wastewater irrigation reduced the amount of nitrogen fertilizer and primed rhizosphere soil nitrogen supplying capacity Ping Li, Xuebin Qi, Chao Hu, Zhijuan Zhao, Xiangyang Fan, Jianjun Chen, Farmland Irrigation Research Institute, Chinese Academy of Agricultural Science and the Ministry of Water Resources, China 2014-1034 Effects of irrigation with domestic treated wastewater on the some soil chemical properties Mehmet Gündüz, Nil Korkmaz, Serafettin ASIK International Agricultural Research and Training Center, Mexcio 0618-106 Distribution behavior and leachability of polycyclic aromatic hydrocarbons (Pahs) in Hunpu wastewater irrigation area, China Song Cui, Qiang Fu Northeast Agricultural University, China 0826-130 Effect of drip irrigation schemes and water quality of sewage effluent on soil chemical properties and tomato yield Yanfeng Li Institute of Water Resources and Hydropower Research, China SEPTEMBER 18, 2014 THURSDAY MORNING 08:30-12:00 Location: Room 303 A, the 3rd Floor of CNCC Chairs: Dr. Mladen Todorovic, CIHEAM - Mediterranean Agronomic Institute of Bari, Italy Prof. Wan Luo, Xi’An University of Technology, China Time 08:30-08:45 08:45-09:00 09:00-09:15 09:15-09:30 09:30-09:45 09:45-10:00 Paper # Technical Presentations 2014-0764 A simple model for determining salt leaching cycle in subhumid regions under controlled drainage Wan Luo, Shan Li Xi’An University of Technology, China 0509-020 A ten-year field experimental study on the effectiveness of dry drainage in soil salinity control Jingwei Wu, MousongWu Wuhan University, China 0514-015 Drainage and salinity problems in the Mexican irrigation districts: an overview 1962-2013 Óscar Luis Palacios-Vélez Campus Montecillo del Colegio de Postgraduados en Ciencias Agrícolas, Mexico 0826-131 Nitrogen and phosphorus loss and optimal drainage time of paddy field under controlled drainage condition Menghua Xiao Jiangsu University, China 0826-132 Influences of additional N fertilizer after heavy rains on growing and yield of maize in North China plain Yanqun Zhang, Jiandong Wang, Shihong Gong, Juan Sui, Jingping Yang Institute of Water Resources and Hydropower Research, China 2014-1460 Numerical simulation of nitrate nitrogen migration in an agricultural activity area with water table fluctuation Shifeng Li China Agricultural University, China 29 10:00-10:15 Tea Break Location: Room 303 A, the 3rd Floor of CNCC Chairs: Prof. Yoshiyuki Shinogi, Kyushu University, Japan Prof. Jingwei Wu, Wuhan University, China Time Paper # Technical Presentations 2014-1560 Hyperspectral analysis on traces of chlorpyrifos in paddy fields discharged water Yali Zhang, Xiwen Luo, Long Ma, Ruijun Ma, Haijian Zhan South China Agricultural University, China 10:30-10:45 0826-133 Modelling soil water flow and solute transport through layered soil Xiaomin Mao China Agricultural University, China 10:45-11:00 2014-0660 Rice-husk biochar potential to affect rice growth and soil moisture Endita Prima Ari Pratiwi, Yoshiyuki Shinogi Kyushu University, Japan 2014-0794 Contribution of groundwater to crop water use in deficit irrigation field Zailin Huo, Xiaoyu Gao China Agricultural University, China 2014-1234 The effect of n fertilization on yields and nitrogen efficiencies in a fouryear wheat/maize cropping practice Yan Li, Guanhua Huang China Agricultural University, China 2014-1386 Field calibration of a cosmic-ray neutron probe for hectar-scale soil moisture detection Shamaila Zia, Francisco Miguel Aguila Marin, Yang Pengnian, Wolfram Spreer, Joachim Müller Universität Hohenheim,Germany 2014-1552 Water and salt dynamics during autumn irrigation and freeze/thaw periods calculated by flux balance method and SHAW model Xiao Tan, Mousong Wu, Jiesheng Huang, Jingwei Wu, Jingjing Liu Wuhan University, China 10:15-10:30 11:00-11:15 11:15-11:30 11:30-11:45 11:45-12:00 Location: Room 303B, the 3rd Floor of CNCC Chairs: Prof. Steven R. Evett, Conservation & Production Research Laboratory, US Department of Agriculture, USA Prof. Taisheng Du, China Agricultural University, China 30 Time Paper # Technical Presentations 2014-1535 Cost-benefit analysis of using sprinkler and drip irrigation systems for tomato production under soilless farming and greenhouse condition Alagha Samuel Adelanke, Jinadu Olugbenga Rufus Giwa Polytechnic, Nigeria 0826-134 Water requirement with irrigation expansion in Jingtai irrigation district, Northwest China: the need to consider irrigation-induced local changes in evapotranspiration demand Songjun Han, Di Xu, Shaoli Wang, Zhiyong Yang Institute of Water Resources and Hydropower Research, China 2014-0295 Response of potato to drip and gun irrigation systems Zhenjiang Zhou, Mathias Neumann Andersen, Finn Plauborg, Ove Edlefsen Aarhus University, Denmark 09:15-09:30 0507-003 Determination of young olive-tree water consumption with drainage lysimeters García Petillo Mario Universidad de la República, Uruguay 09:30-09:45 2014-1126 Study on adaptive capacity of agricultural technology to climate change Zhifen Zhai, Janhua Zhang Chinese Academy of Agricultural Engineering, China 2014-0374 Evaluating WEPP predictions of runoff and soil losses on a hillslope in the loess plateau region of China Shuangcheng Tang, Wan Luo Xi’An University of Technology, China 08:30-08:45 08:45-09:00 09:00-09:15 09:45-10:00 10:00-10:15 Tea Break Location: Room 303 B, the 3rd Floor of CNCC Chairs: Prof. José Manuel Gonçalves, University of Lisbon, Portugal Prof. Junguo Liu, Beijing Forestry University, China Time 10:15-10:30 10:30-10:45 Paper # Technical Presentations 2014-0217 Modernizing surface irrigation and land levelling in Hetao with application of the DSS SADREG José Manuel Gonçalves University of Lisbon, Portugal 0826-135 Field evaluation of water distribution for variable rate irrigation system Jiusheng Li, Weixia Zhao Institute of Water Resources and Hydropower Research, China 31 10:45-11:00 11:00-11:15 11:15-11:30 11:30-11:45 11:45-12:00 2014-1233 Variation of leaf water potential in orychophragmus violaceus based on regulation of carbonic anhydrase under osmotic stress Deke Xing, Yanyou Wu Institute of Geochemistry Academy of Sciences, China 2014-0744 Research on the key way to achieve best match of irrigation and arable land in China Bangbang Zhang China Agricultural University, China 0507-002 Management width border-check irrigation to enhance water application on a field pasture Claudio García Instituto Nacional de Investigación Agropecuaria (INIA),Uruguay 2014-0628 Assessment of daily ETo estimation with the hargreaves-samani and the penman-monteith temperature methods in Inner Mongolia, China Xiaodong Ren, D. S. Martins, Zhongyi Qu, Luis S. Pereira Inner Mongolia Agricultural University, China 0826-136 Improving soil moisture and evapotranspiration estimation by data assimilation and remote sensing data over irrigated cropland in the Northern China plain He Chen Institute of Water Resources and Hydropower Research, China SEPTEMBER 18, 2014 THURSDAY AFTERNOON 13:30-16:00 Location: Room 303 A, the 3rd Floor of CNCC Chairs: Prof. Luis Pimentel-Bribiesca, Universidad Autónoma Chapingo, Mexico Dr. Songhao Shang, Tsinghua University, China Time Paper # 13:30-13:45 2014-1528 Watershed correction for a better water harvesting Luis Pimentel-Bribiesca Universidad Autónoma Chapingo, Mexico 0618-107 The research on health evaluation index system of water-based system in watershed Zhenxiang Xing, Jing Li, Qiang Fu, Hao Guo, Yi Ji Northeast Agricultural University, China 13:45-14:00 32 Technical Presentations 14:00-14:15 14:15-14:30 14:30-14:45 14:45-15:00 2014-0917 Effect of climate change on hydrological conditions in rapid urbanization regions: a case study in the Taihu basin, China Liu Liu, Zongxue Xu China Agricultural University, China 0618-055 Simulation of streamflow components using soil water assessment tool (SWAT) model Tingmin Yu, Marenya Moses ARC, South Africa 2014-1300 Water management impacts on measured turbulent fluxes of heat, water carbon and methane of Mid-South US rice Michele L. Reba, Earl Vories, Merle Anders, Chris Henry, Paul Counce USDA-Agricultural Research Service, US 2014-1306 Study on the application of lightweight aggregate concrete in lining channels of Hetao irrigation district Xiangdong Shen, Chu Gao Inner Mongolia Agricultural University, China 15:00-15:15 Tea Break Location: Room 303 A, the 3rd Floor of CNCC Chairs: Prof. García Petillo Mario, Universidad de la República, Uruguay Prof. Ping Guo, China Agricultural University, China Time 15:15-15:30 15:30-15:45 15:45-16:00 Paper # Technical Presentations 2014-1235 Effects of regulated deficit irrigation on the yield, quality and water productivity of tomato in an arid region of Northwest China Jianhua Zheng, Guanhua Huang China Agricultural University, China 2014-1211 Enhancing water use efficiency with plant feedback irrigation control: the case for sorghum Steven R. Evett, Susan A. OShaughnessy, Judy A. Tolk, Paul D. Colaizzi, R. Louis Baumhardt, Robert C. Schwartz USDA-Agricultural Research Service, US 2014-1104 Crop planting structure uncertainty and multi-objective programming models Mo Li, Ping Guo, Liudong Zhang China Agricultural University, China 33 Location: Room 303B, the 3rd Floor of CNCC Chairs: Prof. Claudio García, Instituto Nacional de Investigación Agropecuaria (INIA), Uruguay Prof. Zhongyi Qu, Water Resources Research Institute of Inner Mongolia, China Time 13:30-13:45 13:45-14:00 14:00-14:15 14:15-14:30 14:30-14:45 14:45-15:00 15:00-15:15 34 Paper # Technical Presentations 0826-137 Modeling canopy resistance from climatic variables for predicting Haofang Yan, Haibin Shi, Oue Hiroki, Chuan Zhang Jiangsu University, China 2014-0737 Sprinkler package modification for a center pivot irrigation system in an alfalfa field Yongchong Li, Haijun Yan, Maona Li, Chengbo Xu, Zhiqiang Wang China Agricultural University, China 2014-0161 The role of dew as a moisture source for sand in a typical semiarid sandmeadow area of Horqin sandy land Tianshuai Wang, Tingxi Liu, Limin Duan, YaoWu Inner Mongolia Agricultural University, China 2014-1463 Emitter clogging sensibility with increasing biofilm components under reclaimed water drip irrigation Bo Zhou, Yunkai Li, Peng Song, Ji Feng, Yinguang Jiang China Agricultural University, China 2014-0924 Grassland steppe evapotranspiration and groundwater contribution in Horqin, Inner Mongolia Yao Wu, Tingxi Liu Inner Mongolia Agricultural University, China 0618-060 Research on transformation laws and calibration method of soil water in tomato roots soil layer Jun Zhang Institute of Soil and Water Conservation, Chinese Academy of Sciences & Ministry of Water Resources, China 0618-014 Behaviors of elemental sulfur and pyrite as electron donors for denitrification in nitrate-contaminated groundwater remediation Jiaoyang Pu China University of Geosciences, China SPECIAL SESSION CHINA-US WATER-SAVING TECHNOLOGY FLAGSHIP PROJECT WORKSHOP 18TH WORLD CONGRESS of CIGR ORAL PRESENTATIONS SEPTEMBER 17, 2014 WEDNSDAY MORNING 08:30-12:00 Location: Room 305, the 3rd Floor of CNCC Chair: Dr. Jiming Jin, Northwest A&F University Time Paper # Technical Presentations 08:30-08:50 0826-101 Enhancing water use efficiency with plant feedback irrigation control: the case for sorghum Dr. Steven R. Evett USDA-ARS, USA 08:50-09:10 0826-114 Indexes of irrigation schedule decision-making and precision control Dr. CaiJiabin China Institute of Water Resources and Hydropower Research 09:10-09:30 0826-103 Potential water conservation using site-specific irrigation Dr. Kenneth C. Stone USDA-ARS 0826-116 Real time control technology for precision surface irrigation Dr. Bai Meijian China Institute of Water Resources and Hydropower Research 0826-104 Soil moisture monitoring using wireless sensor network Dr. Ruixiu Sui USDA-ARS, USA 09:30-09:50 09:50-10:10 10:10-10:20 Tea Break 35 Time 10:20-10:40 10:40-11:00 11:00-11:20 11:20-11:40 11:40-12:00 Paper # Technical Presentations 0826-113 Prediction of crop water requirement based on remote sensing Dr. Zhang Zhitao Northwest A&F University 0826-115 Cloud Intelligent Cotton Drip Irrigation Management and Benefit Analysis – A Case Study on Aksu Dr. Yu Yinduo China Institute of Water Resources and Hydropower Research 2014-1240 Advancing irrigation efficiencyin the arid southwest USA Dr. Kevin F. Bronson USDA-ARS 0826-107 Micro irrigation Development in China Dr. Li Guangyong China Agricultural University 0826-110 Numerical simulations of the impact of irrigation on arid climate over northwestern China Dr. JimingJin Northwest A&F University SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 14:00-17:00 Location: Room 305, the 3rd Floor of CNCC Chair: Dr. Ruixiu Sui, USDA-ARS Time 36 Paper # Technical Presentations 14:00-14:20 0826-117 R&D of irrigation equipment in Jiangsu University Dr. Li Hong Jiangsu University 14:20-14:40 0826-109 Development and application of center pivot irrigation system in China Dr. Yan Haijun China Agricultural University 14:40-15:00 0826-111 Assessing whole-field sprinkler irrigation application uniformity Dr. Zhang Lin Northwest A&F University 15:00-15:20 Tea Break Time 15:20-15:40 15:40-16:00 16:00-16:20 16:20-16:40 16:40-17:00 Paper # Technical Presentations 0826-106 Impact of Soil Variability on Irrigated Cotton Yield Dr. Earl D. Vories USDA-ARS 0826-102 Water Management Impacts on Measured Turbulent Fluxes of Heat, Water Carbon and Methane of Mid-South US Rice Dr. Michele L. Reba USDA-ARS 0826-112 Monitoring and modeling of crop habitat process under different mulching modes: challenge and opportunity Dr. Zhao Ying Northwest A&F University 0826-105 Technologies to Manage Limited Irrigation Water Supplies and Sustain Irrigated Agriculture Dr. Thomas J. Trout USDA-ARS 0826-108 Drip Irrigation Scheduling for Potato in North China Plain and Northwest China. Dr. Wang Fengxin China Agricultural University SEPTEMBER 18, 2014 THURSDAY MORNING 08:30-12:00 Location: Room 305, the 3rd Floor of CNCC Chairs: Dr. Ruixiu Sui, USDA-ARS, USA Dr. Wenting Han, Northwest A&F University, China 08:30-12:00 Discussion on Flagship Project 37 SESSION I POSTER SESSIONS SEPTEMBER 16, TUESDAY 13:30 - 17:00 Topic (1) No. Poster # Paper # Paper Titles Institution Country 1 11-001 0526-026 Research of Reference Crop Evapotranspiration Kang Yinhong Sichuan Agricultural University China 2014-0624 Impacts of Climate and Landuse/ cover Change on Streamflow Using SWAT combined Separating Method for Xiying River Basin in Northwestern China Guo Jing Northwest Agriculture & Forestry University China 2 11-002 Topic (2) No. Water-saving Vs. Farmer Revenues Poster # Paper # Paper Titles Institution Country Li Lianhao China Agricultural University China 3 12-001 0618-039 Structure of Mechanized Cultivation Technology of Seedling-growing Bowl Tray Made of Paddy-straw and Its Effects on Rice Yield 4 12-002 2014-0159 Analyzing Climate Change Impacts on Rainfed Maize Water Productivity in The Murray Darling Basin, Australia Kang Yinhong Sichuan Agricultural University China Yang Ning Liaoning provincial academy of agricultural sciences China 5 12-003 2014-0280 Performance Evaluation of AquaCrop Model for Plastic Film Mulching on Rain-fed Maize in The Semi-arid Region of China Northeast 6 12-004 2014-0346 Effects of Different Subsoiling Tillage on Water use Efficiency and Grain Yield of Maize Liu Zhandong, Chinese Academy of Agricultural Sciences China 2014-0556 Effects of Different Nitrogen Rates, Irrigation Volumes, and Application of Humic Acid on The Yield and Nitrate Leaching in Eggplant Fields: A Lysimeter Study Dong Yiwei Chinese Academy of Agricultural Sciences China 2014-0674 Study on Water Consumption and Forecast Model of Fraxinus Chinensis Li Pingfeng Beijing agricultural information technology research center China 7 8 38 Drought Management 12-005 12-006 10 12-008 11 12-009 12 12-010 Topic (3) No. 13 14 15 16 17 18 '2014-0938 Estimation of pipe losses in drip irrigation system and its control measurements through redesigning in Pakistan Qaiser Javed Institute of Agricultural Engineering, Jiangsu University China 2014-1317 Assessing and optimizing field irrigation performance for seed corn field in the middle Heihe River basin Jiang Yao Center for Agricultural Water Research, China Agricultural University China 2014-1410 Assessing the impacts of groundwater table changes on soil salinity and maize yield under groundwater irrigation in the upper Yellow river basin, China Hao Yuanyuan Chinese-Israeli International Center for Research and Training in Agriculture, China Agricultural University China Modernization of Irrigation Systems Poster # 13-001 13-002 13-003 13-004 13-005 13-006 Paper # Paper Titles Institution Country 0618-027 Sensitivity Analysis of Reservoir Irrigation Benefit in the Context of Climate Change Ma Fangkai Department of Planning, Changjiang Institute of Survey, Planning, Design and Research, China 0618-100 Design and Experiment of Automatic Decision System for Nutrient Solution Irrigation in Substrate Culture Based on Negative Pressure Zhang Fang Xi an University of Technology China 2014-0091 Irrigation Scheduling of Cotton with Drip Irrigation under Film Mulching Based on Pan Evaporation Shen Xiaojun Key Laboratory of Crop Water Use and Regulation, Ministry of Agriculture, Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences China 2014-0500 Layout Pattern and Planning on Integrated Irrigation and Drainage System in HuangHuai-Hai Plain Region Shi Xueshuang China Agricultural University China 2014-0908 Integrated Technologies for Improvement of Irrigation Systems in Mountainous and Hilly Areas Chen Jian College of Engineering and Technology, Southwest University China 2014-0922 Abrasion wear resistance of co2 gas shielded spraying powder composite surfacing subsoiling plow shovel Jiao Renbao School of Mechanical Engineering, JiaMusi University China 39 China 19 13-007 2014-1163 Cistern Siting Based on GIS and Estimation of Crop Irrigation Requirement in a Hilly Watershed in China 20 13-008 2014-1245 Irrigation System Based on the Principle of Penetration Zhan linhai College of Engineer,China Agricultural University China 2014-1335 Research on Fine Roots Distribution of Apple Trees in Water Storage Pit Irrigation Guo Xianghong College of water resource science and engineering, Taiyuan University of Technology China 2014-1343 Applicability of different infiltration models to infiltration characteristics of soil water under negative hydraulic head Shang Guanyuyi Graduate School of Chinese Academy of Agricultural Science China 2014-1364 Experiment Investigation and Numerical Simulation of Head-discharge Relationship for Arch Sharp-crested Weir Ma Qinbiao College of Water Conservancy and Civil Engineer, China Agricultural University China 2014-1373 Distributed simulation of soil water dynamics and crop water productivity in Hetao Irrigation District Yin Ruixue Center for Agricultural Water Research, China Agricultural University China 2014-1439 The Effects of Ice Cover on Water and Salts Movement in Unsaturated Frozen Soil : Experiments and Simulation Tan Xiao State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University China 21 13-009 22 13-010 23 13-011 24 13-012 25 13-013 Topic (4) No. 26 27 40 Liu Weiping Key Laboratory of Ecoenvironments in Three Gorges Cistern Region, Ministry of Education, College of Resources and Environment, Southwest University Salinity Assessment and Control Poster # 14-001 14-002 Paper # Paper Titles Institution Country 0618-022 Adsorption of ammonia nitrogen onto ceramic composite materials based on lake sediment from aqueous solution Yu Yang School of Water Resources and Environment, China University of Geosciences China 2014-0511 Effects of Saline Water Drip Irrigation on The Soil Water Distribution and Processing Tomato Growth in Hetao Irrigation District Liu Yu College of Water Resources and Civil Engineering, China Agricultural University China 28 14-003 29 14-004 30 14-005 31 14-006 32 14-007 33 14-008 34 14-009 35 14-010 Topic (5) 2014-0512 Biomass Production and Nutrients Removal by Spirulina Platensis FACHB 439 in Beer Wastewater Wu Xiaodan Engineering Research Center of Biomass Conversion, Ministry of Education, Nanchang University China 2014-0554 Comparing Performance of ADE and MIM Based Models for Simulating Solute Transport in Heterogeneous Soils Mao Xiaomin College of Water Resources and Civil Engineering, Center for Agricultural Water Research in China, China Agricultural University China 2014-0627 Evaluation of Regulated Deficit Irrigation Performance of Saline Water Based on Principal Component Analyses He Xin China Agricultural University China 2014-0629 The Impact of Reclaimed Water Drip Irrigation in Summer Maize with Different Nitrogen Fertilizer Application on CO2 and N2O Emissions Gao Dawei China Agricultural University China 2014-0812 Research on the hydrochemistry characteristics and evolution of groundwater in the upper, middle and lower reaches of Inner Mongolia Hetao irrigation district Li Bin The College of Water Conservancy and Civil Engineering,Inner Mongolia Agriculture University China 2014-0887 Comparative study of canal water and filtered chlorinated canal water to evaluate the efficiency of water treatment system in Millat town Faisalabad, Pakistan Ahmad Azeem Institute of Agricultural Engineering, Jiangsu University China 2014-1299 Comparison of Heavy Metal Pollution Loads from Different Land Uses in Binzhou Liu Gang College of Information and Electrical Engineering, China Agricultural University China 2014-1581 The Effect Of Salinity On Soil Evaporation: Experiments and Simulation Zhang Shaowen State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University China Irrigation and Soil Monitoring: Practices and Equipment No. Poster # Paper # Paper Titles Institution Country 36 15-001 2014-0139 Effects of Sub-soiling on Corn Yield and Soil Physical Quality Li Xia Shihezi University China 37 15-002 2014-0364 Fractal Behavior of Tillage Soil Surface Roughness Hou Zhanfeng Inner Mongolia Agricultural University China 41 38 15-003 39 15-004 40 15-005 Topic (6) No. 16-001 42 16-002 43 16-003 Topic (7) No. 44 42 Tang Xiumei Beijing Academy of Agriculture and Forestry Sciences China 2014-0596 Anisotropy of Soil Gas Transport Properties of Disturbed and Compacted Japanese Andisol as Affected by Water Content and Level of Compaction Purwoko Hari KuncoroDepartment of Agricultural and Environmental Engineering, The United Graduate School of Agricultural Sciences, Iwate University, Morioka, Japan Indonesia 2014-0743 Experimental Study on Infiltrability of Layered Soil with Point Source Infiltrometer Hu Yaqi College of Water Resources & Civil Engineering, China Agricultural University China 2014-0411 Soil Conservation and Improvement Poster # 41 Study on the Ecological Planning of Basic Farmland Protect in Tropical Platform Area: A Case Study in Tunchang County, Hainan Province Paper # Paper Titles Institution Country 2014-0745 Effects of the Bionic Ring Structure on Drill Pipe Surface Anti-corrosion Wang hubiao Key Laboratory of Bionic Engineering (Ministry of Education),Jilin University China 2014-0981 Comparing Mathematic Models for Chemical Transfer from Soil to Surface Runoff with Rainfall Impact Yang Ting Institute of Water Resources and Hydro-electric Engineering, Xi’an University of Technology China 2014-0999 Research of Calculation Methods of Fractal Dimension on Soft Terrain Surface Jiang Chunxia College of Engineering, Nanjing Agricultural University China Landscape Protection and Preservation Poster # 17-001 Paper # Paper Title Institution Country 2014-1637 Variation of Vegetation NDVI and its Responses to Climate Change in the Contiguous Region of Shanxi, Shaanxi and Inner Mongolia During Recent 15 Years Ning Tingting State Key Laboratory of Soil Erosion and Dryland Farming on the Loess Plateau, Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of Water Resources China THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION II FARM BUILDINGS, EQUIPMENT, STRUCTURES AND ENVIRONMENT 43 Overview of Session II: Farm Buildings, Equipment, Structures and Environment Monday, Sept. 15 08:00-20:00 Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:30-09:30 Opening Ceremony Location:Plenary Hall B, CNCC 09:30-09:40 Tea Break 09:40-12:10 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC 12:10-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 1. Keynote Speeches Location: 307A+B,CNCC 15:00-15:15 Tea Break 15:15-16:45 1. Keynote Speeches Location: 307A+B,CNCC 19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC Tuesday, Sept. 16 08:30-10:00 Technical Oral Presentation 2. Livestock Environment Control Location: 307A,CNCC 10:00-10:15 10:15-12:15 Technical Oral Presentation Wednesday, Sept. 17 12:15-13:30 13:30-15:00 Technical Oral Presentation Tea Break 2. Livestock Environment Control Location: 307A,CNCC 19:30-21:30 44 3. Livestock Waste Treatment Location: 307B,CNCC Lunch Location:Plenary Hall A, CNCC 4. Livestock Environment Control Location: 307A,CNCC 15:00-15:15 15:15-17:35 Technical Oral Presentation 3. Livestock Waste Treatment Location: 307B,CNCC 6. Livestock Waste Treatment Location: 307B,CNCC Tea Break 5. Precision Livestock Farming Location: 307A,CNCC 6. Livestock Waste Treatment Location: 307B,CNCC Chinese Cultural Night Location: Beijing Performance & Arts Centre 08:30-10:00 Technical Oral Presentation 7. Greenhouse Environment and Equipment Location: 307A,CNCC 10:00-10:15 10:15-12:15 Technical Oral Presentation 12:15-13:30 Thursday, Sept. 18 13:30-15:00 Technical Oral Presentation Tea Break 7. Greenhouse Environment and Equipment Location: 307A,CNCC Friday, Sept. 19 8. Livestock Structures & Equipment & Animal Welfare Location: 307B,CNCC Lunch Location:Plenary Hall A, CNCC 9. Greenhouse Environment and Equipment Location: 307A,CNCC 15:00-15:15 15:15-15:30 Technical Oral Presentation 8. Livestock Structures & Equipment & Animal Welfare Location: 307B,CNCC 10. Aquaculture Farming Location: 307B,CNCC Tea Break 9. Greenhouse Environment and Equipment Location: 307A,CNCC 10. Aquaculture Farming Location: 307B,CNCC 16:00-17:00 Closing Ceremony Location:309A+B, CNCC 19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC 08:00-15:00 Technical Tours 45 OPENING CEREMONY OF SESSION Ⅱ FARM BUILDINGS, EQUIPMENT, STRUCTURES AND ENVIRONMENT 18TH WORLD CONGRESS OF CIGR ORAL PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-16:45 1. Keynote Speeches Location: Room 307A-307B, the 3rd floor of CNCC Chair: Prof. Guoqing Zhang, Aarhus University, Denmark Time Paper # Technical Presentations 13:30-14:00 0826-201 The development and results of the Patio housing system for broilers animal health, welfare and environmental impact Prof. Peter Groot Koerkamp Professor of Biosystems Engineering at the Farm Technology group, Interim Chair Holder at the Animal Production Systems group, Wageningen University, the Netherlands 14:00-14:30 0826-202 The introduction of animal welfare in China Prof. Jun Bao President of Northeast Agricultural University, China 2014-1597 Precision Livestock Farming technologies: basic principles and examples Prof. Daniel Berckmans Professor of Department of Biosystems, Faculty of Bioscience Engineering at KU Leuven, Belgium 14:30-15:00 15:00-15:15 Tea Break Location: Chair: Room 307A-307B, the 3rd floor of CNCC Prof. Baoming Li, Deputy-dean of College of Water Resources and Civil Engineering, China Agricultural University, China 46 Time 15:15-15:45 15:45-16:15 16:15-16:45 Paper # Technical Presentations 0826-203 Trends in CFD application in agriculture Prof. In-Bok Lee Professor of Laboratory of Aero-Environmental & Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea 0826-204 Energy-saving techniques in Chinese solar greenhouse Prof. Qichang Yang Chief Scientist and Director of the Research Center for Protected Agriculture & Environmental Engineering, Chinese Academy of Agricultural Sciences (CAAS), Director of Key Lab of Energy Saving & Waste Management of Agricultural Structures, Ministry of Agriculture, China 0826-205 New biofiltration technologies applied in recirculating aquaculturalsystems Prof. Songming Zhu Professor and Executive Dean of College of Biosystems Engineering and Food Science, Zhejiang University, China SEPTEMBER 17, 2014 WEDNESDAY MORNING 08:30-12:15 2. Livestock Environment Control Location: Room 307A, the 3rd floor of CNCC Chair: Prof. Daniel Berckmans, Professor of Department of Biosystems, Faculty of Bioscience Engineering at KU LeuvenKU Leuven, Belgium Time 08:30-09:00 09:00-09:20 Paper # Technical Presentations 2014-0486 The influence of diurnal variation in animal activity and digestion on animal heat production Prof. Søren Pedersen Aarhus University, Denmark 2014-0196 Development of a reference test installation for the validation of naturally ventilated airflow rate measurement techniques Philippe Van Overbeke Institute for Agricultural and Fisheries Research, Belgium 47 09:20-09:40 2014-1247 Effect of pigment intensity and region of eggshell on the spectral transmission of visible light that passed the eggshell and the element change during the incubation Yue Yu Zhejiang University, China 09:40-10:00 0508-005 Water use at Texas High Plains dairies Ken Casey Texas A&M University, USA 10:00-10:15 Tea Break Location: Room 307A, the 3rd floor of CNCC Chair: Prof. Jun Bao, Deputy Party Secretary and President of Heilongjiang Bayi Agricultural University, China Time 10:15-10:35 10:35-10:55 10:55-11:15 11:15-11:35 11:35-11:55 11:55-12:15 48 Paper # Technical Presentations 2014-1586 Automating CFD to calculate ventilation rate of a naturally ventilated building Se-Woon Hong KU Leuven, Belgium 0523-010 Development of web-based forecasting system of airborne livestock virus spread using Open FOAM CFD technology Tae-hwan Ha Seoul National University, Korea 0523-012 Statistical analysis of aerial dust in a mechanically ventilated pig house considering worker’s respiratory Yeseul Jo Seoul National University, Korea 2014-0948 Environmental decontamination with slightly acidic electrolyzed water for reducing pathogens in layer houses Li Ni China Agricultural University, China 2014-1589 A study of computational fluid dynamics simulation airflow, temperature and humidity in weaner house in Southern China Qiaona Pan Zhejiang University, China 2014-0753 Influence of spraying time on cooling effect of sprinkler system in dairy barns Zhihui Yan China Agricultural University, China 3. Livestock Waste Treatment Location: Room 307B, the 3rd floor of CNCC Chair: Dr. Joseph Zulovich, University of Missouri, USA Time Paper # Technical Presentations 2014-1037 Case studies: dry composting pig and poultry mortalities Prof. Thomas Banhazi University of Southern Queensland, Australia 09:00-09:20 0508-011 Production of nitrogen fertilizer using acid wet scrubbers at animal facilities Lingying Zhao Ohio State University, USA 09:20-09:40 2014-0134 Biofiltration for treatment of exhaust air at animal houses Roland W. Melse Wageningen University, the Netherlands 2014-0177 Computational fluid dynamics investigation of particle collection by vegetative barriers Li Guo Jilin University, China 08:30-09:00 09:40-10:00 10:00-10:15 Tea Break Location: Room 307B, the 3rd floor of CNCC Chair: Dr. Jiqin Ni, Purdue University, USA Time 10:15-10:35 10:35-10:55 10:55-11:15 11:15-11:35 Paper # Technical Presentations 2014-1533 How to reduce various environmental impacts from animal manure by more than 50% - Results of a design and evaluation study on strategies for integrated manure management Peter Groot Koerkamp Wageningen University, the Netherlands 0512-002 VOC and H2S emissions from full-scale land spreading of manure slurry investigated by dynamic chambers Tavs Nyord Aarhus University, Denmark 2014-1389 Optimization of coagulation-flocculation process for biogas slurry pretreatment using response surface methodology Lei Wang Zhejiang University, China 2014-1380 Modelling of a chemical air scrubber for the removal of gaseous emissions from pig housing facilities Caroline Van der Heyden Ghent University, Belgium 49 11:35-11:55 2014-0740 Carbon balance of valorization of livestock waste through biohythane coupled with algae technology Jiaming Li China Agricultural University, China SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 13:30-17:35 4. Livestock Environment Control Location: Room 307A,the 3rd floor of CNCC Chair: Prof. Søren Pedersen, Aarhus University, Denmark Time Paper # Technical Presentations 2014-1615 Effect of roofing material type on microclimate in the buildings of sheep Hatem Cairo University, Egypt 13:50-14:10 2014-0367 Influencing factors of dust removal efficiency by electrostatic spray and the correlation analysis Yu Ru Nanjing Forestry University, China 14:10-14:30 2014-0195 Point extraction system for partial air cleaning in finishing pig houses Anders Leegaard Riis Pig Research Centre, Danish Agriculture &Food Council, Denmark 2014-1173 Slightly acidic electrolyzed water treatment for disinfection on the surface of tire inoculated with Escherichia coli O157:H7 and Salmonella enteritidis Yitian Zang China Agricultural University, China 13:30-13:50 14:30-14:50 15:00-15:15 Tea Break 5. Precision Livestock Farming Location: Chair: Room 307A, the 3rd floor of CNCC Prof. Matteo Barbari, Professor of Agricultural, Food and ForestrySystems, University of Florence, Italy 50 Time Paper # Technical Presentations 0506-010 Image-based precision livestock farming tool supporting the analysis of broiler chicken activity and welfare Daniel Berckmans KU Leuven, Belgium 2014-1595 Practical implementation of an automatic 3D vision system for dairy cow locomotion monitoring Daniel Berckmans KU Leuven, Belgium 2014-1593 Automatic weight estimation of individual pigs using image analysisDaniel Berckmans KU Leuven, Belgium 2014-1629 Dairy cow body condition scoring in automatic milking systems by 3D vision Xiangyu Song Lely Industries N.V., the Netherlands 16:35-16:55 0618-069 Development of an automatic animal dimension detection system based on stereo vision Zhuo Li China Agricultural University, China 17:15-17:35 2014-0132 Accurate discrimination of individual dairy cattle using video analysis Kaixuan Zhao Northwest A&F University, China 15:15-15:35 15:35-15:55 15:55-16:15 16:15-16:35 6. Livestock Waste Treatment Location: Room 307B, the 3rd floor of CNCC Chair: Dr. Lingying Zhao, Professor of Department of Food, Agricultural and Biological Engineering, Ohio State University, USA Time 13:30-14:00 14:00-14:20 Paper # Technical Presentations 2014-0137 Ammonia emissions from naturally ventilated dairy cattle buildings – a review of field measurements in European countries Prof. Guoqiang Zhang Aarhus University, Denmark 0618-066 Potential NH 3 and CH 4 emissions from pig slurries produced in commercial and experimental sites Salvador Calvet Universitat Politecnica de Valencia, Spain 51 14:20-14:40 14:40-15:00 0519-011 Impact of alternative air exhaustion in housing for poultry on concentration of harmful gases in the air Stefan Mihina Slovak University of Agriculture in Nitra, Slovakia 2014-0121 Assessment of different technical solutions to reduce the fossil fuel consumption of agricultural buildings and machinery on the farm to limit direct CO2 emissions Mélynda Hassouna INRA, France 15:00-15:15 Tea Break Location: Room 307B, the 3rd floor of CNCC Chair: Dr. Teng Teeh Lim, University of Missouri, USA Time 15:15-15:35 15:35-15:55 15:55-16:15 16:15-16:35 16:35-16:55 16:55-17:15 52 Paper # Technical Presentations 2014-0289 Aerial pollutant emissions from two manure-belt layer hen houses with two-year continuous monitoring Jiqin Ni Purdue University, USA 2014-0742 Assessment of breath methane measurement with an artificial reference cow in the lab Liansun Wu Wageningen University, the Netherlands 2014-0724 Odor emissions from a dairy cow building in Denmark facilitated with a hybrid ventilation system Dezhao Liu Aarhus University, Denmark 2014-1000 Using the chamber technique to quantify greenhouse gas emission from the open yard and manure storage of a dairy farm in China Luyu Ding China Agricultural University, China 2014-0920 Measurement method for urine puddle depth in dairy cow houses as input variable for ammonia emission modelling Johannes Wilhelmus Snoek Wageningen University, the Netherlands 0618-067 Greenhouse gas emissions from dairy houses - measurements in naturally ventilated buildings Alexander Schmithausen Bonn University, Germany SEPTEMBER 18, 2014 THURSDAY MORNING 08:30-12:15 7. Greenhouse Environment and Equipment Location: Room 307A, the 3rd floor of CNCC Chair: Prof. Qichang Yang, Chief Scientist and Director of the Research Center for Protected Agriculture & Environmental Engineering, Chinese Academy of Agricultural Sciences (CAAS), Director of Key Lab of Energy Saving & Waste Management of Agricultural Structures, Ministry of Agriculture, China Time 08:30-09:00 09:00-09:20 09:20-09:40 09:40-10:00 Paper # Technical Presentations 0826-206 Status of the speaking plant approach in greenhouse environmental conditioning Prof. Gerard P. A. Bot Wageningen University, the Netherlands 2014-0896 Measured energy use in a greenhouse with tomatoes compared to predicted use by a mechanistic model including transpiration Sven Nimmermark Swedish University of Agricultural Sciences, Sweden 0618-090 PAR transmittances of condensate covered solar greenhouse covering materials Nan Wang China Agricultural University, China 2014-1089 Thermal performance of solar-greenhouse with a new type composite wall Ming Li Chinese Academy of Agricultural Engineering, China 10:00-10:15 Tea Break Location: Room 307A, the 3rd floor of CNCC Chair: Prof. Gerard P.A. Bot, Professor of Wageningen University, The Netherlands 53 Time Paper # 10:15-10:35 10:35-10:55 10:55-11:15 11:15-11:35 11:35-11:55 8. Technical Presentations 2014-1500 The light environment in the greenhouse: a review Dake Wu Xinan University, China 2014-1636 Study on the law of flooding and releasing heat of solar heat pipe filled with phase change materials (PCMs) in greenhouse Yong Wu China Agricultural University, China 2014-0703 Effect of acoustic frequency technology on the growth of strawberry in solar greenhouse Reda Emam China Agricultural University, China 2014-0702 Response of cucumber seedlings to audible sound waves Reda Emam China Agricultural University, China 0618-062 Effects of daily fertigation on soil properties and cucumber yield in Chinese solar greenhouse Min Wei Shandong Agricultural University, China Livestock Structures; Equipment; Animal Welfare Location: Room 307B, the 3rd floor of CNCC Chair: Prof. Thomas Banhazi, University of Southern Queensland, Australia Time 08:30-08:50 08:50-09:10 09:10-09:30 09:30-09:50 Paper # Technical Presentations 2014-0967 Devices to provide post-weaning pigs with wood as manipulable material Matteo Barbari University of Florence, Italy 2014-0644 Start-up of a pilot scale anaerobic digestion system for swine finishing barn Teng Teeh Lim University of Missouri, USA 2014-0148 CFD model of regenerative heat exchanger Pavel Kic Czech University of Life Sciences Prague, Czech 2014-0150 Mathematical model for optimal arrangement of milking parlor Pavel Kic Czech University of Life Sciences Prague, Czech 10:00-10:15 Tea Break 54 Location: Chair: Room 307B, the 3rd floor of CNCC Prof. Peter Groot Koerkamp, Professor of Biosystems Engineering at the Farm Technology group, Interim Chair Holder at the Animal Production Systems group, Wageningen University, the Netherlands Time Paper # Technical Presentations 0523-014 Strategic path of development for live pig healthy aquaculture in China Qing Liu China Agricultural University, China 2014-0169 Compost barns for dairy cows - design criteria and animal welfare Ofner - Schroeck Elfriede LFZ Raumberg - Gumpenstein, Austria 2014-1607 Classification of potential sheep heat-stress levels according to the prevailing meteorological conditions Dimitris K. Papanastasiou Center for Research and Technology – Hellas, Greece 2014-0371 Nonlinear finite element static analysis and experiment of laying breeder hens cage floor Tengfei Li China Agricultural University, China 11:35-11:55 0512-001 Improvement of the Multipath Routing Algorithm and its application in the nursing pigsty Changhua Ma Jiangsu University, China 11:55-12:15 0506-004 Mean lameness over herds by meta analysis Ahmet Erhan Karahan Ege University, Turkey 10:15-10:35 10:35-10:55 10:55-11:15 11:15-11:35 SEPTEMBER 18, 2014 THURSDAY AFTERNOON 13:30-15:30 9. Greenhouse Environment and Equipment Location: Room 307A, the 3rd floor of CNCC Chair: Prof. In-bok Lee, Professor of Laboratory of Aero-Environmental &Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea 55 Time 13:30-13:50 13:50-14:10 14:10-14:30 14:30-14:50 14:50-15:10 15:10-15:30 10. Paper # Technical Presentations 0523-011 Evaluation of wind pressure coefficient on the greenhouse built in reclaimed land using computational fluid Uk-hyeon Yeo Seoul National University, Korea 2014-1516 The comprehensive performance of north wall in Chinese greenhouse evaluation model and application based on weighted entropy method Xin Zhang Northwest A&F University, China 0509-019 CFD study on overall and local ventilation rates of greenhouses built in reclaimed land considering thermal condition Tae-hwan Ha Seoul National University, Korea 0514-003 A novel solar sea water desalination film used in ocean agriculture Hongfei Zheng Beijing Institute of Technology, China 0618-025 Strengthening electrochemical reduction of nitrate using methanol and salicylic acid Lijun Yao China University of Geosciences, China 0618-091 Tomato fruit firmness and colour change in response to greenhouse microclimate, cultivar and storage conditions Ellen Letsogile Thipe Botswana College of Agriculture, Botswana Aquaculture Farming Location: Chairs: Room 307B, the 3rd floor of CNCC Prof. Songming Zhu, Professor and Executive Dean of College of Biosystems Engineering and Food Science, Zhejiang University, China Prof. Ying Liu, Institute of Oceanology, Chinese Academy of Sciences, China. Time 13:30-13:50 56 Paper # Technical Presentations 2014-0344 Effects of light environment factors on the gonadal maturation of Atlantic salmon (Salmo salar) in recirculating aquaculture systems (RAS) Denggao Qiu Chinese Academy of Sciences, China 13:50-14:10 14:10-14:30 14:30-14:50 14:50-15:10 2014-1149 Study on the appropriate ratio of oyster and gracilaria in the progress of managing waste water from Atlantic salmon aquaculture in RAS Ying Li Chinese Academy of Sciences, China 0509-044 N removal bacteria analysis in bio-filter different sections of full-scale marine recirculating aquaculture system Yunjie Ruan Zhejiang University, China 2014-1417 The bioturbation study of perinereis aibuhitensis on the organic matter nitrogen and phosphorus release in the sediment Dazuo Yang Dalian Ocean University, China 2014-1420 Primary analysis of the organic-matter and energy budget in the closedrecirculating aquaculture system of perinereis aibuhitensis Dazuo Yang Dalian Ocean University, China 57 SESSION II POSTER SESSIONS SEPTEMBER 16, TUESDAY 13:30 - 17:00 Topic (1) No. 45 21-001 Paper # Paper Titles Institution Country 0618-077 Turbulent flow around a rib: numerical vs. wind tunnel experiments GerasimosMartzopoulos Department of Hydraulics, Soil Sciences and Agricultural Engineering, Aristotle University of Thessaloniki Greece Pogran Stefan Slovak University of Agriculture in Nitra Slovakia 46 21-002 2014-0166 Effect of Roof Cladding on Quality of Indoor Environment of Stalls 47 21-003 2014-0168 Performance of Geotextilegravel Bed All-weather Surface for Cattle and Horses Hans von Wachenfelt Swedish University of Agricultural Sciences Sweden 48 21-004 2014-0248 Passive Systems to Control Microclimate Inside Buildings Evelia Schettini University of Bari Italy Stéphane Godbout IRDA 49 21-005 2014-0284 Temporal and Seasonal Change of NH3 Concentration: Case Study in An Agricultural, Forest and Urban Site 50 21-006 2014-0553 Composting Villages’ Layer Manure with C50 Bioreactor Zhao Mingjie MAE Wellful Industries Co., Ltd., Beijing, China China Pang Qiaona The College of biosystems engineering and Food Science of Zhejiang University China 51 21-007 2014-0583 A Study on Airflow, Temperature and Humidity Simulation Base on CFD of Weaner house in Southern China 52 21-008 2014-0801 Removal Efficiencies in Fullscale Biofilters Cleaning Pig House Exhaust Air Rune Andreasen Pig Research Centre, Danish Agriculture & Food Council Denmark 2014-0857 Effects of a Water-cooled Cover on Farrowing Sows under Hot and Humid Climates Pang Zhenzhen Department of Protected Agriculture Science and engineering, Hainan University China 53 58 Poster # Livestock Environment Control & Livestock Waste Treatment 21-009 54 21-010 2014-0875 Research on the Action Mechanism of Sheep Taking Medicine Shower in Strong Circulation Spray Fireld 55 21-011 2014-1052 Odor Reduction from Pig Housing using Alkaline Aircleaning Malene Joergensen Pig Research Centre, Danish Agriculture & Food Council Denmark 2014-0289 Aerial Pollutant Emissions from Two Manure-Belt Layer Hen Houses with Two-Year Continuous Monitoring Jiqin Ni Purdue University United States 56 21-012 Topic (2) No. 57 58 59 60 61 62 Poster # 22-001 22-002 22-003 22-004 22-005 22-006 Zhang Lichun Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China China Greenhouse Structure & Environment & Equipment Paper # Paper Titles Institution Country 0508-019 Application of Case for Closed Cultivation System of Solar Greenhouse in China Yuan Hongbo Key Laboratory on Modern Precision Agriculture System Integration Research of Ministry of Education, China Agricultural University China 0509-008 The Optimum Design of the Air-conditioning System of a Plant Factory with Highefficient Water Use and the Effect of its Higher Humidity Condition on Growth in Plants Seiji MATSUO Department of System Innovation, school of Engineering, The University of Tokyo Japan 0519-017 Effect of CO2 Enrichment and Nutrient on Growth of Tomato in Solar Greenhouse Wang Hongyu College of Water Conservancy and Civil Engineering, China Agricultural University China 0519-018 Effect of CO2 Enrichments under Different Water Conditions on Growth and Photosynthetic Characteristics of Tomato Plants in Heliogreenhouse Zhou Shili College of Water Resources & Civil Engineering, China Agricultural University China 0526-021 Estimating Optimum Design of Photo-bioreactor for Cultivating Microalgae using Computational Fluid Dynamics Uk-hyeon Yeo Department of Rural Systems Engineering, Research Institute for Agriculture and Life Science, College of Agriculture and Life Sciences, Seoul National University Korea 2014-0063 Research and Development of Greenhouse Automatic Transfer Device for Spray Plant Protection Equipment Zhuo Jieqiang Beijing Agricultural Machinery Institute, Beijing, China China 59 63 64 22-008 2014-0064 Zhuo Jieqiang Beijing Agricultural Machinery Institute, Beijing, China China 2014-0065 Study on Experimental Comparison of Energy Consumption and Dehumidification of Dehumidifier in Greenhouse Zhuo Jieqiang Beijing Kingpeng International Hi-Tech Corporation, Beijing, China China Xin Mingjin College of Engineering, Shenyang Agricultural University, Shenyang, China China 65 22-009 2014-0736 Design and Simulation Analysis of Greenhouse Heatexchanging Dehumidifier 66 22-010 2014-1090 Application of BP Neural Network in Predicting Solar Greenhouse Soil Temperature He Fen Chinese Academy of Agricultural Engineering China 2014-1091 Feasibility Study for Using Solar Thin-film Cell Module as Glazing Covering Material of Greenhouse South-facing Roof Wei Xiaoming Institute of facility Agriculture, Chinese Academy of Agricultural Engineering China 2014-1239 Research Advances in The Natural Ventilation of Greenhouse Based on CFD Song Wei Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University China 2014-1281 Research on Calculation Method of Geometric Parameters about the Solar Greenhouse’s Lighting Surfaces Bai Yikui College of Water Conservancy, Shenyang Agricultural University China 2014-1464 Simulation of Heat Storage Capacity of Solar Greenhouse Walls in Different Regions Cui Wenhui College of Water Resource and Civil Engineering, China Agricultural University China 2014-1488 Coupling Diurnal Light Distribution and Temperature Variation to Simulate Solar Greenhouse Du Jianjun Beijing Research Center for Information Technology in Agriculture, Beijing Academy of Agriculture and Forestry Sciences China 2014-1516 The comprehensive performance of north wall in Chinese greenhouse evaluation model and application based on weighted entropy method Zhang Xin College of Horticulture, Northwest Agriculture and Forestry University China 2014-1548 Effect of Incident Angle on Radiation Transmittance of Solar Greenhouse Covering Materials Wang Nan College of Water Resource and Civil Engineering, China Agricultural University China 67 68 69 70 71 72 73 60 22-007 Study on Experimental of Spraying Liquid Medicine of Prevention Plant Disease Spraying Equipment in Greenhouse 22-011 22-012 22-013 22-014 22-015 22-016 22-017 Topic (3) No. 74 75 76 77 78 Poster # 23-001 23-002 23-003 23-004 23-005 Livestock Structure & Equipment Paper # Paper Titles Institution Country 0519-013 Design of Intelligent Monitoring and Control System in Poultry House Based on LabVIEW Benhua Zhang College of Engineering, Shenyang Agricultural University China 0526-022 Design of Small-scaled Wind Power Generation System Using Exhaust Flow of Livestock House Se-woon KU LEUVEN, Kasteelpark Arenberg 30 Korea 0618-075 Growing finishing pig weight estimation accuracy analysis based on LabVIEW Mao Taotao College of water resources & civil engineering, China Agricultural University, Beijing, China China 0618-095 The full traceability management of animals and animal products Lu Changhua Institute of Veterinary Medicine, Jiangsu Academy of Agricultural Sciences China 2014-0053 Comparison between Laying Hen Performance in The Perch System and The Cage System Cao Yanfei College of Water Resources and Civil Engineering, China Agricultural University China Morshed Wasseem Lu Changhua University of Florenc Italy 79 23-006 2014-0385 Improving Thermal Performance of Earth-to-air Heat Exchanger By Wetting The Ground: An Experience in Southern Iraq 80 23-007 2014-0391 Cultivated Pack Barns Improve Longevity of Dairy Cows Leso Lorenzo University of Florence Italy 2014-0445 Effects of different feeding patterns on reproductive hormones in group-housed gilt Wang Shuhua Shanxi Academy of Agricultural Sciences China 2014-1205 The impact of tunnel ventilation on thermal environment in solar heated swine housing Yuan Yueming College of Engineering, Jilin Agricultural University China 81 82 23-008 23-009 Topic (4) No. 83 Poster # 24-001 Aquaculture Farming Paper # Paper Titles Institution Country 2014-1256 A New Design Concept of using Slightly Acidic Electrolyzed Water for Disinfection System in RAS Pei Luowei Key Laboratory of Equipment and Informatization in Environment Controlled Agriculture, Ministry of Agriculture China 61 84 85 62 24-002 24-003 2014-1302 2014-1481 Correlation Analysis of pH and Available Chlorine Concentration of Slightly Acidic Electrolyzed Water under the Condition of Mixture Qi Fanyu Key Laboratory of Equipment and Informatization in Environment Controlled Agriculture, Ministry of Agriculture China Effect of various woods on structural strength in Korean ginseng cultivation facilities Yun Namkyu Department of Agricultural Engineering, National Academy of Agricultural Science Korea THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION III EQUIPMENT ENGINEERING FOR PLANTS 63 64 Wednesday, Sept. 17 Tuesday, Sept. 16 Monday, Sept. 15 Lunch Location:Plenary Hall A, CNCC Keynote Speeches Location: 311A+B,CNCC Tea Break Keynote Speeches Location: 311A+B,CNCC Welcome Reception Location:Plenary Hall A, CNCC 12:10-13:30 13:30-15:00 15:00-15:15 15:15-16:55 19:00-21:00 12:00-13:30 10:15-11:55 Technical Oral Presentation 10:00-10:15 Sub-session I 6. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: 306A,CNCC Lunch Location:Plenary Hall A, CNCC Sub-session II 3. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC Tea Break Sub-session III 4. Harvesting and Animal Husbandry Technology Location: Room 306B,CNCC Sub-session III 4. Harvesting and Animal Husbandry Technology Location: Room 306B,CNCC Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC 09:40-12:10 Sub-session II 3. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC Tea Break 09:30-09:40 Sub-session I 2. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: 306A,CNCC Opening Ceremony Location:Plenary Hall B, CNCC 08:30-09:30 08:30-10:00 Technical Oral Presentation Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:00-20:00 Overview of Session III: Equipment Engineering for Plants Subsession IV 5. Robotics and Vehicle Automation Location: Room 311B,CNCC Subsession IV 5. Robotics and Vehicle Automation Location: Room 311B,CNCC 65 10:00-10:15 8:30-10:00 Technical Oral Presentation 19:30-21:30 15:15-17:00 Technical Oral Presentation 15:00-15:15 15:00-15:15 13:30-15:00 Technical Oral Presentation 12:00-13:30 Thursday, Sept. 18 10:15-12:00 Technical Oral Presentation Wednesday, Sept. 17 13:30-15:00 Technical Oral Presentation Sub-session I 10. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: 306A,CNCC Sub-session I 10. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: 306A,CNCC Sub-session I 6. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: 306A,CNCC Sub-session I 6. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: 306A,CNCC Sub-session III 8. Harvesting and Animal Husbandry Technology Location: Room 306B,CNCC Sub-session III 8. Harvesting and Animal Husbandry Technology Location: Room 306B,CNCC Tea Break Sub-session II 14. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC Lunch Location:Plenary Hall A, CNCC Sub-session II 11. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC Tea Break Sub-session II 11. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC Sub-session III 12. Harvesting and Animal Husbandry Technology Location: Room 306B,CNCC Sub-session III 12. Harvesting and Animal Husbandry Technology Location: Room 306B,CNCC Chinese Cultural Night Location:Beijing Performance & Arts Centre Sub-session II 7. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC Tea Break Sub-session II 7. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC Subsession IV 15. Precision Farming and Aerial Applications Location: Room 311B,CNCC Subsession IV 13. Automation for Off-Road Equipment Location: Room 311B,CNCC Subsession IV 13. Automation for Off-Road Equipment Location: Room 311B,CNCC Subsession IV 9. Spectroscopy, Machine Vision, and Biosensing Location: Room 311B,CNCC Subsession IV 9. Spectroscopy, Machine Vision, and Biosensing Location: Room 311B,CNCC 66 Friday, Sept. 19 Technical Tours Gala Dinner Location:Plenary Hall A, CNCC 19:00-21:00 08:00-15:00 Closing Ceremony Location:309A+B, CNCC Sub-session II 14. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC Tea Break Sub-session II 14. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: 311A,CNCC 16:00-17:00 Thursday, Sept. 15:15-15:45 18 Technical Oral Presentation 15:00-15:15 13:30-15:00 Technical Oral Presentation Sub -session IV 15. Precision Farming and Aerial Applications Location: Room 311B,CNCC Sub -session IV 15. Precision Farming and Aerial Applications Location: Room 311B,CNCC OPENING CEREMONY OF SESSION III EQUIPMENT ENGINEERING FOR PLANTS 18TH WORLD CONGRESS OF CIGR ORAL PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-16:55 Location: Chair: Room 311A-311B, the 3rd Floor of CNCC Prof. Xiwen Luo Open Speeches 13:30-13:35 Prof. Xiwen Luo Academician, Chinese Academy of Engineering, Academic Degree Committee of Chinese State Council, President of Chinese Society of Agricultural Machinery (CSAM), China 13:35-13:40 Prof. John Kenneth Schueller, Chair of CIGR Technical Section III, Department of Mechanical and Aerospace Engineering, University of Florida, USA 1. Keynote Speeches Location: Chair: Time 13:40-14:00 14:00-14:20 Room 311A-311B, the 3rd Floor of CNCC Prof. Xiwen Luo, Academician, Chinese Academy of Engineering, China Paper # Technical Presentations 0826-301 Integrated solutions to increase the productivity and convenience of agricultural production systems Dr. John F. Reid Director, Product Technology and Innovation at the Moline Technology Innovation Center (MTIC), John Deere, USA 0826-302 Advanced manufacturing technologies for agricultural equipment Prof. John Kenneth Schueller Chair of CIGR Technical Section III, Department of Mechanical and Aerospace Engineering, University of Florida, USA 67 14:20-14:40 14:40-15:00 0826-303 Global problems of mechanization of Russian Federation Agriculture Prof. Oleg Marchenko Head of Department of All-Russia Research Institute for Mechanization in Agriculture (VIM), Russia 0826-304 Effect of UHMW-PE protuberances' dimensions on sliding resistance and normal adhesion of biomimetic plates in Bangkok clay soil Prof. Vilas M Salokhe Former President of the Asian Association for Agricultural Engineering, Profess of Kaziranga University, India 15:00-15:15 Tea Break Location: Room 311A-311B, the 3rd Floor of CNCC Chair: Prof. John Kenneth Schueller, Uiversity of Florida, USA Time 15:15-15:35 15:35-15:55 15:55-16:15 16:15-16:35 16:35-16:55 68 Paper # Technical Presentations 0826-305 New technology and new equipment of rice production mechanization Prof. Xiwen Luo Academician, Chinese Academy of Engineering, Academic Degree Committee of Chinese State Council, President of Chinese Society of Agricultural Machinery (CSAM) , China 0826-306 Automation in crop farming – state-of-the-art and where do we go from here? Prof. Hermann Auernhammer Department of Live Science Engineering, Munich University of Technology, Germany 0826-307 How does tractor design and infield management influence conservation agriculture and should it cause a rethink of the tractor? Prof. Allen Jack McHugh Chief sector of technological basis of agri-ecosystem development, State Research Institution “North-West Research Institute of Agricultural Engineering and Electrification”, University of Southern Queensland, Australia 2014-0642 Development of laser-guided precision sprayers for tree crop applications Prof. Heping Zhu Lead Scientist in the Application Technology Research Unit (ATRU), USA 0526-001 Concept of modern experimental field for agroecological research Prof. Vladislav Minin Former Executive Secretary of the International Association on Mechanization on Field Experiments , Chief of Euro-Asian Center for Sustainable Development of Rural Areas, Russia SEPTEMBER 17, 2014 WEDNESDAY MORNING 08:30-11:55 Sub-session I 2. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: Room 306A, the 3rd Floor of CNCC Moderator: Prof. Jianqiao Li, Chairman of Terrain-machine System Committee of CSAM, China Time Paper # 08:30-09:00 2014-0294 Applications of bionics in agriculture Prof. Julian Vincent University of Bath, UK 2014-0037 Design and development of a tractor drawn conservation Tillage bionic ripper planter Prof. Timothy Simalenga Centre for Coordination of Agricultural Research and Development in South Africa (CCARDESA) 0826-311 Tractor EU Certification Prof. Paolo PL Pinciroli European Certifying Organization, Italy 09:00-09:30 09:30-10:00 Technical Presentations 15:00-15:15 Tea Break Location: Room 306A , the 3rd Floor of CNCC Moderator: Prof. Julian Vincent, University of Bath, UK Time 10:15-10:35 10:35-10:55 10:55-11:15 Paper # Technical Presentations 2014-0244 Useful lessons from nature for improving energy efficiency and sustainable development Prof. Yuying Yan University of Nottingham,UK 2014-0458 Biology inspired fiber based materials for water management in plant production Dr. Thomas Stegmaier German Institute for Textile and Fibre Research Denkendorf, Germany 2014-0791 Bionic muscle-research on performance output and preparation of linear driving unit using ionic polymer metal composites (IPMC) Prof. Gang Zhao Harbin Engineering University, China 69 11:15-11:35 11:35-11:55 2014-1168 Experiments on the erosion resistance of bionics surface with the characteristics of material coupled with pattern Dr. Chengchun Zhang Jilin University, China 2014-0638 Anti-attachment function of slippery zones in nepenthes pitchers and its application in biomimetic developing agricultural pest trapping Dr. Lixin Wang Hebei University of Science and Technology, China Sub-session II 3. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: Room 311A, the 3rd Floor of CNCC Moderator: Mr. Xuejun Yang, Deputy Head, Modern Agricultural Equipment Co.,Ltd., China Time 08:30-08:45 08:45-09:00 09:00-09:15 09:15-09:30 09:30-09:45 09:45-10:00 Paper # Technical Presentations 0826-322 Global perspectives on conservation agriculture and the FAO “Save & Grow” concept Prof. Josef Kienzle FAO 0826-321 Conservation agriculture in China Prof. Hongwen Li China Agricultural University, China 0826-345 Intoduction to IAMFE and Mechanization of Field Experiments in China Prof. Shuqi Shang, Qingdao Agricultural University, China 2014-1398 Current situation and development proposal of vegetable production mechanization in China Dr. Yongsheng Chen Nanjing Research Institute for Agriculture Mechanization, China 0826-346 Alternate row planting with stubble retation and matching implements Prof. HongleiJia Jilin University, China 2014-0033 Development of an intelligent style of precision maize seeder Dr. DuanyangGeng Shandong University of Technology, China 10:00-10:15 Tea Break Location: Room 311A , the 3rd Floor of CNCC Moderator: Prof. Heping Zhu, Lead Scientist in the Application Technology Research Unit (ATRU) 70 Time Paper # Technical Presentations 10:15-10:30 2014-0337 Design and experimental study on rice drip irrigation under plastic film planter Prof. Lei He (Xuegeng Chen) XinJiang Academy of Agricultral and Reclamation Science, China 0509-003 Investigation of effective sonic combination for improving quality of red lettuce depending on vegetation stages Dr. Yeseong Kang Gyeongsang University, Korea 10:45-11:00 2014-0373 Optimization design of portable tree transplanting machine’s shock absorber Dr. Jianxi Zhu Zhejiang University, China 11:00-11:15 2014-0245 Biodegradable spray mulching coatings based on hydrolyzed protein Dr. EveliaSchettini University of Bari, Italy 2014-0765 Structure optimization of pollination nozzle on hybrid rice pollination machine and pollination experiment Dr. Chen Tang Zhejiang University, China 0509-056 Performance Values of a Disk Chipper During Working with Pomegranate Pruning Residues Dr. Yiğit.Mete Akdeniz University, Turkey 0523-013 Investigations and DEM-Simulation of Disc Mowers Dr. Sebastian Kemper TU Braunschweig, Germany 10:30-10:45 11:15-11:30 11:30-11:45 11:45-12:00 Sub-session III 4. Harvesting and Animal Husbandry Technology Location: Room 306B, the 3rd Floor of CNCC Moderator: Prof. Weiming Ding, Nanjing Agricultural University, China Time 08:30-08:45 08:45-09:00 09:00-09:15 Paper # Technical Presentations 2014-0450 Effects of seed delivery tube and air pressure on the uniformity of seed distribution Dongxing Zhang China Agricultural University, China 2014-0904 Development of a PTO driven generator for an electric wheel drive of A potato harvester Zhigang Zhao GKN Land Systems, China 2014-1080 Instrumentation design for combine harvester manufactured quality evaluation Shumao Wang China Agricultural University, China 71 09:15-09:30 09:30-09:45 09:45-10:00 2014-1228 The design and experiment on the short conveying channle of sugarcane billet harvester Qingting Liu South China Agricultural University, China 2014-0601 Simulation of vibration harvesting mechanism for sea buckthorn Longsheng Fu Northwest Agricultural and Forestry University, China 2014-0213 Cost efficient surface condition determination system for sugar beets for a harvester cleaning control using an industrial RGB camera Vadim Tsukor University of Applied Sciences Osnabrueck, Germany 10:00-10:15 Tea Break Location: Room 306B, the 3rd Floor of CNCC Moderator: Prof. Weiming Ding, Nanjing Agricultural University, China Time Paper # Technical Presentations 10:15-10:30 2014-0715 Organisation and profit-sharing in mechanised sugarcane harvesting: is australias experience relevant to China? Malcolm Keith Wegener The University of Queensland, Australia 10:30-10:45 2014-0723 Analysis of harvesting and logistic concepts for ensiling grass Stefan Thurner Bavarian State Research Centre, Germany 2014-0994 Introduction, demonstration and promotion of mechanical cassava harvesting in Sub-Saharan Africa Emmanuel Bobobee Agricultural Research Council; South Africa 11:00-11:15 2014-0393 Experiments on Litchi Fruit Mechanical Property and Micro-mechanical Damage Dr. Min Ye South China Agricultural University, China 11:15~11:30 2014-0224 Development of 4SY-1.8 Rape Windrower Dr.Lei Li Huazhong Agricultural University (China) 11:30~11:45 2014-0315 Control System Design for Round Baler/Wrapper Combine Based on Embedded Controller Dr.Jianping Wang Huhhot Branch of Chinese Academy of Agricultural Mechanization Scienc (China) 11:45-12:00 2014-0228 Design of 4LMZ-160 Ramie Harvester and Analysis on its Cutter Dr.Chen Shen Qingdao AgriculturalUniversity (China) 10:45-11:00 72 Subsession IV 5. Robotics and Vehicle Automation Location: Room 311B, the 3rd Floor of CNCC Moderator: Prof. Qin Zhang, Washington State University, USA Time Paper # 08:25-08:45 0825-001 KEYNOTE: Perception-based navigation of agricultural vehicles Prof. Shufeng Han Deere & Co., USA. 0825-002 Wheel-slip control on an intelligent "Bin-dog" system in natural orchard environment Dr. Yunxiang Ye Washington State University, USA 0825-004 Principle analysis and parameter optimization for under-actuated endeffector manipulator for apple picking Dr. Yaxin Yu Zhejiang Sci-Tech University, China 0825-005 Field evaluation of the robotic twining prototype for high-trellis hop production Dr. Jianfeng Zhou Washington State University, USA 09:30-09:45 0825-006 Research on orchard working vehicle active safety control method based on bodywork attitude prediction Dr. Xin Wang China Agricultural University, China 09:45-10:00 2014-0181 Innovative density measuring system for new soil compactor Dr. Jan Haebler Berlin Humboldt University, Germany 08:45-09:00 09:00-09:15 09:15-09:30 Technical Presentations 10:00-10:15 Tea Break Location: Room 311B, the 3rd Floor of CNCC Moderator: Prof. John Kenneth Schueller,University of Florida, USA Time 10:15-10:30 10:30-10:45 Paper # Technical Presentations 2014-0204 Design and experimental study on the equipment of take directional seedling to the melon category grafting robot Dr. Chuanyu Wu Zhejiang Sci-Tech University, China 0825-007 Effects of cross-track errors on sugarcane harvester performance stubble height and cane stalk loss Dr. Shaochun Ma Washington State University, USA 73 10:45-11:00 11:00-11:15 11:15-11:30 11:30-11:45 11:45-12:00 0825-008 Design and configuration of a walking robot platform for force control Dr. Bo Jin Zhejiang University, China 0825-009 The method of obtaining the relative position and orientation for the masterslave agricultural vehicles based on stereo vision Dr. Weiping Bi Nangjing Agricultural University, China 0825-010 Automatic navigation system research for rice planter Dr. Liguo Wei Chinese Academy of Agricultural Mechanization Sciences, China 0825-011 Design and implementation of identification and location system for bagging robot Dr. Hui Wang ChineseAcademy of Agricultural Mechanization Sciences, China 2014-0130 Design and Optimization of The Stroke Adjustable Chinese Hickory Harvester Xiao-Qiang Du College of Mechanical Engineering and Automation, Zhejiang Sci-Tech University SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 13:30-17:00 Sub-session I 6. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: Room 306A, the 3rd Floor of CNCC Moderator: Prof. Timothy Simalenga, Centre for Coordination of Agricultural Research and Development in South Africa Time 13:30-13:50 13:50-14:10 74 Paper # Technical Presentations 0526-023 Improving sticky soil handling capability of disc seeders by bionic modification Prof. Rashid Qaisrani Department of Agriculture, Fisheries and Forestry, Australia 2014-0721 Design and development of biomechatronic products Prof. Shujun Zhang The University of Gloucestershire, UK 14:10-14:30 14:30-14:45 14:45-15:00 2014-0055 Structure design and performance evaluation of bionic wheel travelling on sand Dr. Rui Zhang Jilin University, China 2014-0664 Performance analysis of planetary gear reducer Jing He Shandong University of Science and Technology, China 2014-0788 Simulation and analysis on a new bionic mechanism to snap corn-ear Li Zhang Jilin University, China 15:00-15:15 Tea Break Location: Moderator: Room 306A, the 3rd Floor of CNCC Prof. Thomas Stegmaier, German Institute for Textile and Fibre Research Denkendorf, Germany Time Paper # Technical Presentations 2014-0030 Bionic mechanism design inspired from biological musculoskeletal systems Dr. Lei Ren University of Manchester, UK 2014-0028 Reviewing soil-tool adhesion in context of reducing adhesive forces in cohesive soils Dr. PeeyushSoni Asian Institute of Technology, Thailand 15:55-16:15 2014-0194 Design and experimental research on wind turbine blade inspired by the airfoil of Long-eared Owl Dr. Weijun Tian Jilin University, China 16:15-16:30 2014-1416 The sand scorpion erosion resistance online detection research Mr. Daobing Chen, Jilin University, China 2014-0854 Bionically inspired serrated structure for improving efficiency of soil surface micro-topography preparation Mr. Zhihong Zhang Kunming University of Science and Technology, China 2014-0711 Experimental study on traction performance of wire mesh wheel under light load Mr. Han Huang Jilin University, China 15:15-15:35 15:35-15:55 16:30-16:45 16:45-17:00 Sub-session II 7. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality 75 Location: Room 311A, the 3rd Floor of CNCC Moderator: Prof. Hongwen Li, China Agricultural University, China Time 13:30-13:45 13:45-14:00 14:00-14:15 14:15-14:30 14:30-14:45 14:45-15:00 Paper # Technical Presentations 0826-323 Status and development of the agricultural aerial plant protection Prof. Xuejun Yang Modern Agricultural Equipment Co.,Ltd., China 0519-009 Agricultural applications of the practical utility platform for developing countries Prof. John H Lumkes Jr. Purdue University USA 2014-0509 Principle analysis and design of rice potted-seedling transplanting mechanism of planetary gear train with non-circular gears Prof. Gaohong Yu Zhejiang Sci-Tech University, China 2014-1271 Experiment on physical and mechanical properties of seedling pot for automatic vegetable transplanter Yanhai Tang, Zhejiang University, China 2014-0585 Study on the hydraulic performance of semi-permeable membrane moistube Prof. Yanxiang Zhu Jiangsu University, China 2014-0811 A research on intelligent of semipermeable membrane micro-moist irrigation technology Prof. Cheng Yan Jiangsu University, China 15:00-15:15 Tea Break Location: Room 311A , the 3rd Floor of CNCC Moderator: Prof. Allen Jack McHugh, University of Southern Queensland, Australia Time 15:15-15:30 15:30-15:45 76 Paper # Technical Presentations 0519-012 Development and performance evaluation of a liquid manure injector for sustainable crop productivity Dr. S. I. Manuwa Landmark University, Nigeria 2014-1440 The mechanical operation technology and necessary machinery in burying straw deeply into dry fields Dr. Ruili Wang Shenyang Agricultural University, China 15:45-16:00 16:00-16:15 16:15-16:30 16:30-16:45 16:45-17:00 0526-008 The Effect of Vacuum Plate Peripheral Speed of Seed Spacing Accuracy with a Vacuum Type Precision Metering Unit Dr.TülekCeren Ege University, Turkey 0509-048 A Study on the Static Stability of Scissor Lift Dr.Chen Zhang Civil Aviation University of China, China 2014-0970 Research on introducing gravity and centrifugal force to improve the filling ability of vertical seed-plate Prof. Hongxin Liu Northeast Agricultural University, China 2014-0220 Design of two-degree-of-freedom manipulator for transplanting rice potted-seedlings based on single-chip control Dr.Yuanjun Fan South China Agricultural University, China 2014-1540 Design and experiment of the 7.5cm row spacing mechanical precise seeder for wheat Dr.Jin Zhao Agricultural University of Hebei, China Subsession III 8. Harvesting and Animal Husbandry Technology Location: Room 306B, the 3rd Floor of CNCC Moderator: Prof. Weiming Ding, Nanjing Agricultural University, China Time Paper # Technical Presentations 13:30-13:45 2014-0372 Mechanics model analysis and properties test of cabbage root during cutting process Dongdong Du Zhenjiang university, China 13:45-14:00 0826-339 Analysis and experimental study on stripping process of corn header Aijun Geng, Shandong Agricultural University, China 0514-011 Analysis of the present situation and the problem of tomato harvester Zhaohui Hao ChineseAcademyofAgriculturalMechanizationSciences, China 2014-1073 The experiment study of the effect of leaf-stripping and tail-broking speed on sugarcane leaf-stripping and tail-broking quality Jinbing Hu Zhenjiang University, China 2014-1513 Performance experiment for grain separation losses monitoring sensor Zhenwei Liang Jiangsu University, China 14:00-14:15 14:15-14:30 14:30-14:45 77 14:45-15:00 2014-0713 Study on dispersion process of granular material in three dimensional parallel vibration sieve Zheng Ma Jiangsu University, China 15:00-15:15 Tea Break Location: Room 306B, the 3rd Floor of CNCC Moderator: Prof. Weiming Ding, Nanjing Agricultural University, China Time 15:15-15:40 15:40-16:05 16:05-16:30 Paper # Technical Presentations 0826-337 Intelligent monitoring and control technology on the cotton picker machine with packing Zhonghua Miao Shanghai University, China 2014-0124 Effects of growth characteristics of sugarcane clusters and cutting height on harvester performance: cutting quality Shaochun Ma Washington State University, USA 2014-0913 Research on movement and simulation platform of wine grape vibrationseparation mechanism Panpan Yuan Shihezi University, China Sub-session IV 9. Spectroscopy, Machine Vision, and Biosensing Location: Room 311B, the 3rd Floor of CNCC Moderator: Prof. Enrong Mao, China Agricultural University, China Time 13:30-13:45 13:45-14:00 14:00-14:15 78 Paper # Technical Presentations 2014-1202 Crop sensing using vehicle-based and handheld high-throughput phenotypers Prof. Naiqian Zhang Kansas State University, USA 0825-012 Apple Identification in Field Environment with Over the Row Machine Vision System Dr. Abhisesh Silwal Washington State University, USA 0825-013 Design and performance test of active light source spectrometer for measuring crop canopy reflection spectrum Dr. Yang Li Nangjing Agricultural University, China 14:15-14:30 2014-0441 Rapid diagnosis of tomato nutrition level based on spectral and image information fusion technology Dr. Hongyu Liu Jiangsu University, China 14:30-14:45 0825-014 Research on cotton row detection algorithm based on binocular vision Dr. Zhongxiang Zhu, China Agricultural University, China 0825-015 Nitrogen nutrition diagnosis of wheat canopy based on spectroscopy Dr. Yi Zhao China Agricultural University, China 14:45-15:00 15:00-15:15 Tea Break Location: Room 311B, the 3rd Floor of CNCC Moderator: Prof. Naiqian Zhang, Kansas State University, USA Time Paper # 15:15-15:30 2014-1193 In-field sensing for corn plant architecture Dr. Ning Wang Oklahoma State University, USA 2014-0874 Monitoring and managing hydroponic nutrients using ion-selective electrodes in closed lettuce cultivation Dr. Daehyun Jung Seoul National University, Korea 2014-1499 Assessment of chlorophyll contents in dendrobium officinale kimura et migo leaves using hyperspectral imaging technique Dr. Xibin Ding Zhejiang University, China 16:00-16:15 2014-1455 Raman spectroscopic study of the upper epidermis of tea in different growth period Dr. LiubinLuo Zhejiang University, China 16:15-16:30 2014-1492 Estimation of the apple flowers based on aerial multispectral image Dr. LihuaZheng China Agricultural University, China 16:30-16:45 0825-016 Development of NDVI measurement device based on active light source Meng Zhang China Agricultural University, China 16:45-17:00 2014-0810 Design of intelligent target fruit tree insecticide sprayer Dr. Wei Zou National Research Center of Intelligent Equipment for Agriculture, China 15:30-15:45 15:45-16:00 Technical Presentations 79 SEPTEMBER 18, 2014 THURSDAY MORNING 8:30-12:00 Sub-session I 10. Agricultural Bionic Mechanism Design and Manufacturing; Tractors Location: Room 306A, the 3rd Floor of CNCC Moderator: Zhenghe Song, China Agricultural University,China Time Paper # Technical Presentations 08:30-08:45 0509-022 Tractor instrumentation for draft energy requirement studies in south africa Prof. Moses OkothMarenya University of Venda, South Africa 2014-0668 A proportional controller for electro-hydraulic hitch system in heavy tractor Jianjun Zhao China Agricultural University, China 09:00-09:15 0526-005 Evaluation of Power Transmission System of the Tractor Manufactured in Turkey From the Point of Multi-Gear Speed Ratios KomekciFirat Department of Agricultural Machinery, Agricultural Faculty, Ege University, Turkey 09:15-09:30 2014-0460 A rapid design method for complex gearbox on high-power tractor Prof. Zhenghe Song China Agricultural University 2014-0305 Development and testing of a small remote control hillside tractor Prof. Fuzeng Yang Northwest A&F University 2014-1469 Design and overcoming obstacles abilities research of tracked driving chassis with planetary structure Dr. Pingyi Liu China Agricultural University, China 08:45-09:00 09:30-09:45 09:45-10:00 10:00-10:15 Tea Break Location: Room 306A, the 3rd Floor of CNCC Moderator: Zhenghe Song, China Agricultural University, China Time 10:15-10:30 80 Paper # Technical Presentations 0618-071 Physical and contact characteristics of seat foam materials for agricultural tractor seating comfort Dr. Xiaoping Jin China Agricultural University, China 10:30-10:45 10:45-11:00 11:00-11:15 0508-002 Simulation on handling stability performance of 4WS vehicle Dr. Ying Han Nanjing Agricultural University, China 2014-0515 A knowledge base system for rapid design on agricultural machinery chassis Dr. Yu Chen, China Agricultural University, China 2014-0342 Hardware design of electronic control system for tractor power shift transmission based on dual-core MCU Qingmei Cao Henan University of Science and Technology, China Subsession II 11. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: Room 311A, the 3rd Floor of CNCC Moderator: Prof. Shuqi Shang, Qingdao Agricultural University, China Time 08:30-08:45 08:45-09:00 09:15-09:30 09:30-09:45 09:45-10:00 Paper # Technical Presentations 2014-1596 Evaluation of soil compaction under conservation tillage in south africa Dr. Tingmin Yu Agricultural Research Council – Institute for Agricultural Engineering, South Africa 2014-1588 Simulation of soil dynamic behaviors of seed openers using the discrete element method (DEM) Dr. Haibo Zhou Shenyang Agricultural University, China 0618-0148 Research on automatic corn seedling transplanter Dr. Tie Shi Heilongjiang Province Academy of Agricultural Machinery Engineering Science, China 2014-0142 3 D DEM Modeling of Single Disc Furrow Opener Draft Force in Paddy Soil Under No Till Soil Dr.Fiaz Ahmad Nanjing Agricultural University, China 2014-1044 Effect of Constant Pressure Agitating on Performance of Fluid Hill-drop Seeder Dr.Lanxin Liu Shenyang Agricultural University, China 81 10:00-10:15 Tea Break Location: Room 311A, the 3rd Floor of CNCC Moderator: Prof. Vladislav Minin, Chief of Euro-Asian Center for Sustainable Development of Rural Areas, Russia Time Paper # Technical Presentations 0512-002 VOC and H2S Emissions from Full-scale Land Spreading of Manure Slurry Investigated by Dynamic Chambers Dr. Tavs Nyord Aarhus University, Denmark 2014-0275 Experimental study of modified starch glue effect on the quality of directional corn seed belt Dr. Xueguan Zhao China Agricultural University, China 2014-0154 Experimental Study on The Filling Performance of Maize Bowl-tray Precision Seeder Dr. Xin Mao Heilongjiang Bayi Agricultural University, China 11:00-11:15 2014-0525 Influence of Cold Plasma Treatment on Ear Characters and Group Quality of Wheat Dr. Chen Tang Zhejiang University 11:15-11:30 2014-0260 Vibrating Threshing Performance of wine Grape Prof.limingLiming Xu China Agricultural University. China 2014-0905 Design and Experimental Study on the Device for Measuring the Charge-to-Mass Ratio of the Charged Droplets Prof. BaijingQiu, Jiangsu University, China 10:15-10:30 10:30-10:45 10:45-11:00 11:30-11:45 Sub-session III 12. Harvesting and Animal Husbandry Technology Location: Room 306B, the 3rd Floor of CNCC Moderator: Prof. Emmanuel Bobobee, Agricultural Research Council; South Africa 82 Time Paper # 08:30-08:45 0826-340 Technical Presentations Research on transporting technologies of standing corn straw plants Lingxin Geng Henan University of Science & Technology, China 0826-341 Experimental study on modulation technology of corn straw compression mode based on different conditions of compression Xin Dong Northeast Agricultural University, China 0826-342 Application and research of no-till reseed technology in the natural grassland vegetation restoration Ku Bu Grassland Research Institute of Chinese Academy of Agricultural Sciences, China 0826-343 Straw collecting, baling and comprehensive utilization technique and equipment Xifeng Liu Heilongjiang Province Agricultural Machinery Engineering Scientific Academy, China 09:30-09:45 0826-344 Wet harvest technology research and development of solar energy forage drying Jianqiang Du Huhhot Branch of Chinese Academy of Agricultural Mechanization Scienc, China 09:45-10:00 2014-1563 Study on the technical regulation of alfalfa hay mechanized harvesting Bei Wu Chinese Academy of Agricultural Mechanization Sciences, China 08:45-09:00 09:00-09:15 09:15-09:30 10:00-10:15 Tea Break Location: Room 306B, the 3rd Floor of CNCC Moderator: Prof. Emmanuel Bobobee, Agricultural Research Council; South Africa Time 10:15-10:30 10:30-10:45 10:45~11:00 11:00~11:15 11:15~11:30 Paper # Technical Presentations 2014-0086 Finite Elements Analysis of The Cutter Component in Disc Saw Cutting CaraganaKorshinskii Harvester author: ShujinQiu units: Shanxi AgriculturalUniversity(China) 2014-0749 Design of scooping plastic film mulch planter and seeding performance test of cotton Fei Liu Inner Mongolia Agricultural University, China 2014-0880 Three-dimensional Design of A Higher Ground Clearance Combine Harvesters for Ratooning Rice author: KangyiZhai units: Huazhong Agricultural University (China) 2014-0986 Design and Study on Metering Device of Pneumatic Grass Seeder GaixiaZhai Chinese Academy of Agricultural Mechanization Sciences, China 2014-0362 Design and Experiment of 4SY-1.8 Rape Walking Windrower Yitao Liao College of Engineering ,Huazhong Agricultural University 83 Sub-session IV 13. Automation for Off-Road Equipment Location: Room 311B, the 3rd Floor of CNCC Moderator: Dr. Noboru Noguchi Time 08:30-08:45 08:45-09:00 09:00-09:15 09:15-09:30 09:30-09:45 09:45-10:00 Paper # Technical Presentations 0825-017 Multisensor data fusion isobus-solution for a sensor based fertilizer application system Prof. Hermann Auernhammer Munich University of Technology, Germany 0825-018 Crop sensors for automation of in-season nitrogen application Dr. Kenneth A. Sudduth Cropping Systems and Water Quality Research Unit,USDA-ARS , USA 0825-019 An intelligent control system for the agricultural materials discharge equipment based on electronic forklift Qing Xie China Agricultural University, China 0825-020 Research on rapid toe-in detection method for assembled combine harvester Yawei Zhang China Agricultural University, China 2014-1561 Control system of kiwifruit picking end-effector Zhen Li Northwest A&F University, China 2014-0112 A knowledge-based application to improve transmission system design automation for agricultural machines Xiaoping Jin China Agricultural University, China 10:00-10:15 Tea Break Location: Room 311B, the 3rd Floor of CNCC Moderator: Prof. Minzan Li, China Agricultural University, China Time 84 Paper # Technical Presentations 10:15-10:30 0618-057 Changes of the color distribution and vegetation index according to red leaf lettuce’s growth Dr. Seongheon Kim Gyeongsang National University, Korea 10:30-10:45 0825-021 An automated gps-based variable- rate aerial spraying system for uav Dr. Yanchao Zhang Zhejiang University, China 10:45-11:00 0825-022 Automatic steering system of tractor based on proportional directional valve Dr. Zhongxiang Zhu China Agricultural University, China 11:00-11:15 0825-023 Design of hydraulic control valves for tractor autopilot system Dr. QuanJia Chinese Academy of Agricultural Mechanization Sciences, China 2014-0778 The structural design and simulation analysis of the palletizing robot and bagged materials handling equipment Wenzhuo Wang China Agricultural University, China 11:15-11:30 SEPTEMBER 18, 2014 THURSDAY AFTERNOON 13:30-16:00 Sub-session II 14. R & D for Farm Machinery and Equipment; Tillage and Soil Preparation; Planting, Seeding, Fertilizing, Plant Protection and Crop Quality Location: Room 311A, the 3rd Floor of CNCC Moderator: Prof. Kienzle Josef, FAO Time Paper # 13:30-13:45 2014-0555 Evaluating optimization of thermal resistance of rice straw particles Zarei Elmira Zhejiang Universtity, China 13:45-14:00 2014-1544 Experimental study of mixing uniformity in jet-mixing apparatus Baijing Qiu Jiangsu University, China 14:00-14:15 2014-0459 Study on mechanization of banana production Zhou Yang South China Agricultural University, China 2014-1517 The influence of single, double subsoiler on soil disturbance under subsoiling conditions Yuxiang Huang Northwest A & F University, China 14:15-14:30 Technical Presentations 85 14:30-14:45 14:45-15:00 2014-1109 Research on the buds-injury-prevention system in sugarcane-seeds cutting Prof. Yiqi Huang Guangxi University, China 2014-0380 Effect of Replacing Nutrient Solution on Nitrogen Utilization for Aeroponic Culturing Lettuce Dr. IbraimoTelehaChabite Jilin University, China 15:00-15:15 Tea Break Time 15:00-15:15 15:15-15:30 15:30-15:45 15:45-16:00 Paper # Technical Presentations 2014-1039 Effects of the Depth of Machine Sowing on Growth Characteristics of Rapeseed Harvest Traits Dr.Wei Xiang Hunan Agricultural University, China 2014-0115 Design of the performance testing device for planter openers Dr. Jinhui Zhao Chinese Academy of Agricultural Mechanization Sciences, China 2014-1504 The Experimental Research and Analysis of the Seed- Meter Device of the Precision Spaced Planter for Corn Dr.Wei Yang Menobleco.ltd, China 2014-1378 Study on Seeding Methods of Cucurbits Seedlings for Grafting Dr.Tong Chen Northwest A & F University, China Sub-session IV 15. Precision Farming and Aerial Applications Location: Room 311B, the 3rd Floor of CNCC Moderator: Prof. John Kenneth Schueller, University of Florida, USA Time 13:30-13:45 13:45-14:00 86 Paper # Technical Presentations 0825-036 Unmanned aerial vehicle-based remote sensing system for soybean highthroughput phenotyping Dr. Lei F. Tian University of Illinois at Urbana-Champaign,USA 2014-1522 An information acquisition system of vegetable safety based on web service Dr. Lihua Zheng China Agricultural University, China 14:00-14:15 14:15-14:30 14:30-14:45 14:45-15:00 0508-030 Determination of ascorbate peroxidase and acetolactate synthase content in barley leaves using visible/near-infrared spectroscopy Chu Zhang Zhejiang University, China 0825-024 Design of wireless sensor network nodes for intelligent monitoring system of micro-irrigation in litchi orchard Jiaxing Xie South China Agricultural University, China 2014-0347 An electronic tongue for investigation of strawberry juice characteristics Shanshan Qiu Zhejang University, China 0825-025 Design and implementation of gateway for hybrid antenna clustering routing algorithm in paddy monitoring Baoxia Sun South China Agricultural University, China 15:00-15:15 Tea Break 87 SESSION III POSTER SESSIONS SEPTEMBER 17, WEDNESDAY 08:30 - 12:00 Topic (1) No. 1 2 3 4 5 6 88 Poster # 31-001 31-002 31-003 31-004 31-005 31-006 Terrain-machine bionic engineering and tractors technology Paper # Paper Titles Institution Country 0508-024 Body Height Adjustment System for Vehicles with Electrically Controlled Air Suspension based on Neural Network PID Control Chen Yuexia School of Automobile and Traffic Engineering, Jiangsu University China 0618-051 Low Altitude and Low Speed Control of Agricultural UAV Based on Binocular Recognition Technology Wang Zhigang Department of Mechatronics Engineering, Applied Technology College, Jilin University, Changchun, Jilin, China China 0618-052 Rugged Terrain Agricultural Information Acquisition Vehicle Based on Quadruped Bionic Theory Wang Zhigang Department of Mechatronics Engineering, Applied Technology College, Jilin University, Changchun, Jilin, China China 0618-056 Design of Tractor CAN Bus System based on ISO11783 Yan Xianghai Department of Vehicle Engineering, Vehicel & Transportation Engineering, Henan University of Science and Technology, Luoyang, China China 2014-0279 Experimental Study on the Abrasive Wear of Bionic Blade for Soil-rototilling and Stubble-breaking Ji Wenfeng Huazhong Agricultural University China 2014-0302 The observation of Himalayan marmot’s claw and analysis of the claw’s soil cutting mechanism Zhang Rongrong Jilin University China 7 8 9 10 11 31-007 31-008 31-009 31-010 31-011 2014-0414 Bionic Design and Structural Analysis of Stubble-cutting Blades Using Finite Element Method Li Mo Jilin University China 2014-0463 Design on The Integrated Hydraulic System for High Clearance Self-propelled Agricultural Machinery Chassis Chen Suiying China Agricultural University China 2014-0578 Skyhook-based Body-seat System Simulation for A Semi-active Suspension Tractor Song Sennan College of Engineering, China Agricultural University, Beijing 100083, China China 2014-0641 Study on a 3-finger bionic manipulator for picking up an apple Xiao Yingkui College of Biological and Agricultural Engineering,Jilin University China 2014-0713 Experimental Research of Biomechanical Properties of Rape Stalks Ma Zheng Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education & Jiangsu Province, Jiangsu University, Zhenjiang Jiangsu, China China Wu Bo Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun, China China 12 31-012 2014-0798 The Experimental Researched on Piston Skirt with Bionic Hole 13 31-013 2014-0876 The Discussion of Caterpillar Wear Mechanism Li Yaowei Hohhot Vocational College China 2014-0916 Based on Hydraulic Steering Tractor Automatic Navigation System Development Fu Weiqiang National Research Center of Intelligent Equipment for Agriculture China 2014-0939 Analysis of the Kinematics of Chinese Mitten Crab Moving on Enough Terrains Zhang Xiaodong School of Mechanical Engineering, Liaoning University of Petroleum &Chemical Technology China 2014-0940 Research on the Model Analysis and Failure Analysis of Electric Bus Quick Change Battery Box Zhao Jianzhu College of Engineering, China Agricultural University China 2014-1197 The Three Dimensional Numerical Simulation of Anti-erosion Properties of the Chiton Acanthochiton Rubrolineatus Tian Ximei Secretariat of the International Society of Bionic Engineering, Jilin University China 14 15 16 17 31-014 31-015 31-016 31-017 89 18 19 20 21 22 23 24 31-019 31-020 31-021 31-022 31-023 31-024 2014-1308 Zhang Rui College of Biological and Agricultural Engineering, Jilin University China 2014-1415 Unparalleled Sensitivity of Photonic Structures in Trogonoptera Brookiana Butterfly Wings Yang Meng Key Laboratory of Bionic Engineering (Ministry of Education, China), Jilin University China 2014-1431 Study on coupling bionic technology for crop harvest Fu Jun Key Laboratory of Bionic Engineering,Ministry of Education,Jilin University China 2014-1582 Design of Tractor AMT Electronic Control System Based on DSP Zhang Jingyun Department of Vehicle and Transportation Engineering, Henan University of Science and Technology China 2014-1583 Fault Diagnosis Research of Tractor AMT Sensors Based on SVR Yan Xianghai Department of Vehicle and Transportation Engineering, Henan University of Science and Technology China 2014-0167 Mathematical Model of Plantar Surface of Ostrich Didactyl Foot Zhang Rui Jilin University China 2014-0746 The Design of Bionic Circular Saws Based on Badger Teeth Gao Zhihui College of Biological and Agricultural Engineering, Jilin University, Changchun,China China Liu Pingyi College of Engineering, China Agricultural University China 25 31-025 2014-1466 Research and Manufacture of Stepless Regulation Wheelbase Vehicle 26 31-026 0618-028 The Applications of Grid Animation in Production Safety Liu Pingyi College of Engineering, China Agricultural University China Inspirations Learning from Far-back Natural Ecology Tong Jin The College of Biological and Agricultural Engineering, Jilin University, 5988 Renmin Street, Changchun 130025, China China Mechanical properties of corn stubble Mu Haifeng Key Laboratory of Engineering Bionics(Ministry of Education,China),Jilin University China 27 28 90 31-018 Research on a New Bionic Walking Wheel with High Trafficabilities of Travelling on Sand and Surmount Obstacles Based on Ostrich Foot 31-027 31-028 0526-033 2014-1402 Topic (3) No. Poster # Harvesting and Animal Husbandry Technology Paper # Paper Titles Name & Institution Country Cui Junwei Modern Agricultural Equipment Co.Ltd. China 29 33-001 2014-0317 Analysis of the Experiments on the Airflow Distribution of Double Centrifugal Fans over Oscillating Sieve 30 33-002 2014-0322 Research and development on the key technologies of plot combine harvester Wang Jiasheng Qingdao Agriculturla University China Duan Zhenhua Shanxi Agricultural University China 31 33-003 2014-0352 Analysis of Caragana Korshinskii Combined Harvester Dial Tooth Type Conveying Mechanism 32 33-004 2014-0361 Simulation of Cyclone Separating and Cleaning System of Soybean Thresher Zhao Xueguan China Agricultural University China 33 33-005 2014-0408 Design and Experiment of the Semi Feeding Harvester Spiral Knife Removing Membrane Xu Jikang Qingdao Agricultural University China 2014-0421 Design and Experiment on Differential Speed Snapping Rollers for Horizontal Roller Corn Harvester Wang Wang Jilin University China 2014-0531 Experiment on Mechanical Properties of Corn Plant Related to Corn Stripping Harvest Mechanism Zhang Zhilong Department of Engineering, China Agricultural University, Beijing, China China 2014-0535 Discussion of Relationship between the Rice Grain′s Link Force and Threshing Tooth′s Line Speed Chen Dejun Jinhua Polytechnic,Jinhua 321007,China China Cui Tao (Department of Engineering, China Agricultural University, Beijing, China China 34 35 36 33-006 33-007 33-008 37 33-009 2014-0558 Optimization Design and Experiment of A Husker Roller for Maize Harvester 38 33-010 2014-0617 Optimization Design of Strip till Mechanism Wu Weixiong South China Agricultural University China 2014-0712 Study on Structural and Operating Parameters of A Cobpicking and Stalk-chopping Combined Mechanism Cui Tao Department of Engineering, China Agricultural University China 39 33-011 91 40 41 42 43 44 45 46 47 48 49 92 33-012 33-013 33-014 33-015 33-016 33-017 33-018 33-019 33-020 33-021 2014-0781 Structure Optimization for Chassis Frame of Combine Harvester Based on Sensitivity Analysis Xu Lizhang Key Laboratory of Modern Agricultural Equipment and Technology,Ministry of Education and Jiangsu Province, Jiangsu University China 2014-0823 Design and experiment of a novel laser leveling system for corn harvester Xing Yazhou Mechanical and electrical engineering College,Hebei Agricultural University China 2014-0897 Simulation and Optimization of the Raking Mechanism of Horizontal Rotary Rake Zhai Gaixia Hohhot Branch of Chinese Academy of Agricultural Mechanization Sciences China 2014-0946 Fatigue Reliability Analysis of Combine Harvester Frame Based on The Load Spectrum Experiment Li Fuqiang College of Engineering, China Agricultural University China 2014-0974 Simulation and Optimization of Multi-link Individual Profiling Ditching and Repression Mechanism of Grass Seeder Li Yang Hohhot Branch of Chinese Academy of Agricultural Mechanization Sciences China 2014-1162 The Variation of Material Performance and its Influence on Fatigue for Caterpillar Harvester in its Operation Geng Guisheng Chinese Academy of Agricultural Mechanization and Sciences China 2014-1167 Numerical Simulation and Optimization of Field on Airand-screen Cleaning Mechanism Based on CFD Su Tiansheng Chinese Academy of Agricultural Mechanization Sciences China 2014-1384 Pseudo-rigid-body Modeling for Underactuated Strawberry Harvesting Manipulator with Rigid-compliant Structured Liu Chang Department of Mechanical & Electrical Engineering, Hebei Agricultural University China 2014-1476 Three Potato Harvester Comparative Experimental Study on Working Performance and Analysis Wang Dongwei Qingdao Agriculture University institute of Electrical and Mechanical engineering China 2014-0975 Experiments of Factors Affecting Corn Grain Loss Rate on Two Types of Snapping Rolls Sun Xuefeng School of Agricultural and Food Engineering, Shandong University of Technology China 50 33-022 2014-1614 Experiments of Chopped Power Consumption Performance on Variable Feeding Angle Cutting Corn Stalks Device 51 33-023 2014-0223 Effect of straw chopped based on the different angle of corn Harvesting Li Qijun Shandong University of Technology China 2014-0852 Study on dynamical simulation of Hydraulic system for Caragana harvester based on SIMULINK Zhang Xiuquan Shanxi Agricultural University, engineering institute China 2014-1054 Experiment of Influencing Factors of Stalk Scatters and Chopped Effect in Corn Vertical Cutting Device Yin Chenghai School of Agricultural and Food Engineering, Shandong University of Technology China 0519-020 Design and Experiment of Wheat Straw Cutting Reciprocating Test Bench Hou Jialin Mechanical and Electronic Engineering College, Shandong Agriculture University China 2014-0126 Design and Flow Field Simulation ofThe Key Components of Safflower Harvest Device Ge Yun Department of Mechanical and Electrical Engineering, Shihezi University, Xinjiang, China China Numerical simulation of internal flow field in centrifugal fan with double outlet and multi-duct Xu Lizhang Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University China 2014-0758 Changes in Chemical, Biochemical and Aroma Volatile Composition of Pomegranate Juice (cv. Wonderful) at Different Maturity Stages and Agro-climatic Locations Rebogile R. Mphahlele Postharvest Technology Research Laboratory, South African Research Chair in Postharvest Technology, Department of Horticultural Sciences, Faculty of AgriSciences, Stellenbosch University, Private Bag X1, Stellenbosch 7602 South Africa 2014-0467 Optimization of Parameters for Sugarcane Lifter Based on Virtual Response Surface Test Hu Jinbing, School of Biosystems Engineering and Food Science, Zhejiang University China 52 53 54 55 56 57 58 33-024 33-025 33-026 33-027 33-028 33-029 33-030 2014-0710 Lu Shanwen School of Agricultural and Food Engineering, Shandong University of Technology China 93 Topic (4) No. 59 60 61 62 63 Paper # Paper Titles Name & Institution Country 0526-019 The Detection System of The Droplet Impact Force Based on PVDF Sensor Zheng Yongjun College of Engineering, Mechatronic engineering, China Agricultural University China 0618-057 Changes of the Color Distribution and Vegetation index according to Red Leaf Lettuce’s Growth Seongheon Kim Department of Bio-Industrial Machinery Engineering, Gyeongsang National University, Jinju, Korea) Korea 0618-061 Crop and Weed Detection Method by AOTF Hyper-spectral Imaging System Mao Wenhua Institute of Mechatronics Technology and Application ,Chinese Academy of Agricultural Mechanization Sciences, Beijing, China China 34-004 0618-086 Study on New Returning Techniques of Wheat/Corn Straw and Problem of Controlling Environmental Pollution Zhang Daolin Department of Agricultural and Food Engineering Shandong University of Technology China 34-005 20140112 A Knowledge-based Application to Improve Transmission System Design Automation for Agricultural Machines Xiaoping Jin College of Engineering, China Agricultural University, Beijing, China China Zhang Yao Key Laboratory of Modern Precision Agriculture System Integration Research, China Agricultural University, Ministry of Education China 34-001 34-002 34-003 64 34-006 0618-072 Development of a portable detector for determining nitrogen status of apple using active light source 65 34-007 20140122 Development of a Spraying System on UAV for Precision Aerial Application Yubin Lan Nanjing Agricultural University, Nanjing, 21001, China United States 67 34-009 20140188 Aquiculture Remote Monitoring and Control Equipment Based on Automatic Cruise Boat Meng Xiangbao Guangdong Institute of Modern Agricultural Equipment China 34-010 20140213 Cost Efficient Surface Condition Determination System for Sugar Beets for a Harvester Cleaning Control using an Industrial RGB Camera Vadim Tsukor University of Applied Sciences Osnabrueck Germany 34-011 20140231 Fruit and leaves detection method based on hyper-spectral imaging Mao Wenhua Chinese Academy of Agricultural Mechanization Sciences China 68 69 94 Poster # Automation Technology Application for GNSSnavigation Technology in Precision Agriculture Zhang Ao Haida satellite navigation technology co., LTD in guangzhou China 70 34-012 20140239 71 34-013 20140267 Communication Between ARM and DSP through SPI Bus Yang Fuzeng Northwest A&F University China 72 34-014 20140268 Design of a Greenhouse Remote Control Speed Electric Tractor Yang Fuzeng Northwest A&F University China 34-015 20140281 The Design and Simulation of A Novel Gripper for The Fruit Picking Robot Yang Fuzeng Northwest A&F University China 34-016 20140282 The Hillside Tractor Positioning Technology Research Based on Multi-sensor Information Fusion Yang Fuzeng Northwest A&F University China Zhou Xuecheng South China Agricultural University China 73 74 75 34-017 20140304 A Three-Dimensional Nondestructive Detection System for Plant Roots in Situ Based on Flat Panel Detector 76 34-018 20140305 Development and Testing of A Small Remote Control Hillside Tractor Yang Fuzeng Northwest A&F University China 34-019 20140399 Tube Stamp for Mechanical Intra-row Individual Plant Weed Control Frederik Langsenkamp, Faculty of Agricultural Sciences and Landscape Architecture, University of Applied Sciences Osnabrueck Germany 34-020 20140412 Detection of Chlorophyll Content of Rice Leaves by Chlorophyll Fluorescence Spectrum Based on PCA-MLP Zhou Lina Jilin University China 34-021 20140417 A Tillage Depth Monitoring System for Tillage Machine Jia Honglei College of Biological and Agricultural Engineering, Jilin University, Changchun, China China 34-022 20140438 Design and Experiment of a Sowing Monitor Based on Fiberoptic Sensors for Precision Planter Luo Dalong, China Agricultural University China 34-023 20140441 Rapid Diagnosis of Tomato Nutrition Level Based on Spectral and Image Information Fusion Technology Liu Hongyu Institute of Agricultural Engineering, Jiangsu University China 20140517 Actual Grain Flow Estimating Based on Process Neural Networks Wang He Shenyang Institute of Automation Chinese Academy of Science, Shenyang 110016, China China 77 78 79 80 81 82 34-024 95 34-025 20140539 Experimental Study on Pneumatic Precision Seedmetering Device for Maize Shi Song College of Engineering, China Agricultural University, Beijing, China China 34-026 20140540 Motion Analysis and Simulation Optimization of Web Type Wang Fangyang College of Engineering, China Agricultural University, Beijing 100083, China China 34-027 20140562 Study Litchi Fruit Image Segmentation Methods and Algorithms: a Comparison Liu Tianhu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China China 34-028 20140707 Sex Determination of Hatching Chicken Embryo by Hyperspectral Transmittance Imaging Hu Pengcheng China 34-029 20140750 The Analysis of Soil Temperature Sensor’s Measure Technology and a New Design of Assemble sensor Zhang Xin Beijing Research Center for Intelligent Agricultural Equipment, Beijing, China China 34-030 20140817 Development of Automatic Aquatic Plant Cleaning Ship Control System Liu Huigui School of Electrical and Information Engineering , Jiangsu University China 89 34-031 20140900 Simulation and Experimental Verification of Air Spraying Drift on N-3 UAV Zhang Songchao Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture China 90 34-032 20140936 Development and Experimental Study on Spraying Device for Stellera Zhao Jianzhu The College of Engineering of China Agricultural University China 91 34-033 20140990 Effects of UAV flying heights on the accuracy of field plot mapping CHAN CHEE WAN, Mechanisation and Automation Research Center Malaysia 34-034 20141032 Design of a GNSS Land Levelling Equipment Bao Han Beijing Research Center for Information Technology in Agriculture China 34-035 20141200 Grain Flow Signal Reduction Noise Using EMD Wang He Shenyang Institute of Automation Chinese Academy of Science China 20141397 Design and Testing of the Control System of the Seedling Precision Seeder in Rice Paddy Field Kuang Jianxia College of Engineering, South China Agricultural University China 83 84 85 86 87 88 92 93 94 96 34-036 95 96 97 98 99 100 101 102 Performance Experiment for Grain Separation Losses Monitoring Sensor Liang Zhenwei Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education and Jiangsu Province, Jiangsu University China 20141532 Development of a Portable Water Turbidity/Transparency Detector Based on NIR Spectroscopy Zheng Lihua Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education, China Agricultural University China 34-039 20141608 Multispectral induced fluorescence versus spectral reflectance for determining the winter wheat Nitrogen deficit Jana Galambosova Department of Machines and Production Systems, Faculty of Engineering, Slovak University of Agriculture in Nitra Slovakia 34-040 20140667 Simulating and Experimental Analysis on Multi-directional Valve of Heavy Tractor Electrohydraulic Hitch Jianjun Zhao College of Engineering, China Agricultural University, Beijing, China China 0825-026 The development of gateway note used in intelligent field information Yao Wen Key Laboratory of Modern Precision Agriculture System Integration Research, China Agricultural University China 20140809 Automatic Classification of Seedling Quality Based on Adaptive Clustering Algorithm Yu Haiye Key Laboratory of Bionic Engineering, Ministry of Education, School of Biological and Agricultural Engineering, Jilin University China 0825-027 Dynamic Modeling of the Leveling System of Paddy Field Laser Leveler Zhao Zuoxi South China Agricultural University China 0825-028 A Matlab-based Hardwarein-the-loop Platform for BUG Algorithm Simulation and Testing Zhao Zuoxi, South China Agricultural University China China China 34-037 34-038 34-041 34-042 34-043 34-044 20141513 103 34-045 0825-029 Development of yield measurement model based on IPC of grain combine Li Xincheng Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education, China Agricultural University 104 34-046 0825-030 Determination of Nitrogen in Soil Using Laser-Induced Breakdown Spectroscopy Zhang Junning National Key Laboratory of Soil-Plant-Machine System 97 105 106 107 108 109 110 111 112 113 114 115 98 34-047 34-048 34-049 34-050 34-051 34-052 34-053 34-054 34-055 34-056 34-057 0825-031 Development of control system for cottonseed delinting machine based on virtual instrument Limming Zhou Chinese Academy of Agricultural Mechanization Sciences China 0825-032 Development of a soil electrical conductivity detection system based on ARM Pei Xiaoshuai Key Laboratory of Modern Precision Agriculture System Integration Research, China Agricultural University China 0825-033 Online Detection Welding Quality of Threshing Drum in Rice and Wheat Harvester Yao Rong Chinese Academy of Agricultural Mechanization Sciences China 0825-034 Study on Power Matching Control of Hydraulic Sugarcane Harvester Gao Yingjie Hebei Key Laboratory of Heavy Machinery Fluid Power Transmission and Control, Yanshan University China 0825-035 Design of Hydraulic System for Whole Stalk Sugarcane Harvester Gao Yingjie Hebei Key Laboratory of Heavy Machinery Fluid Power Transmission and Control, Yanshan University China 0825-036 Unmanned Aerial Vehiclebased remote sensing system for soybean high-throughput phenotyping Liujun Li China 0825-037 Using Interception of Photosynthetically Active Radiation to Assess Dormant Pruning Severity in A Planar Sweet Cherry Orchard Jingjin Zhang Center for Precision and Automated Agricultural Systems, Washington State University United States 0825-038 A novel method for measuring the volume and surface area of egg Zhang Weizheng College of Biosystems Engineering and Food Science, Zhejiang University China 0825-039 Design and Research of a Movable Soil Information Platform Ma Yang College of Mechanical and Electronic Engineering, Northwest A&F University China 0825-040 Navigation control algorithm research about transplanter based on the feedback linearization Bai Xiaping Key laboratory of Industrial Informatics, Shenyang Institute of Automation Chinese Academy of Sciences China 0825-041 Development of LIDAR based Autonomous Navigation System for Combine Harvester Zhao Teng Vehicle Robotics Laboratory, Graduate School of Agriculture, Hokkaido University Japa 116 34-058 0526-024 Modeling of Heat Pump Assisted Heating-Drying System Erkan DİKMEN Dept. of Energy Systems Engineering, Fac. of Technology, Süleyman Demirel Univ. 117 34-059 20140649 An instrument for determination of pesticide residues based on acetylcholinesterase biosensor Guo Zhao Shandong University of Technology China POSTER SESSIONS SEPTEMBER 17, WEDNESDAY 13:30-17:30 Topic (2) No. Cultivating Agricultural Machinery, it includes the major of tillage, sowing, transplanting and plant protection Poster # Paper # Paper Titles Name & Institution Country Liu Jiyuan Shandong Academy Of Agricultural Machinery Sciences Belgium 1 32-001 0509-014 Problem and Countermeasure Discussion of Mechanized Farming of Main Double Cropping Grain Crop 2 32-002 0509-023 Analysis of Mower Knife Wear Based on Reverse Engineering Fu Zuoli China Agricultural University China Fang Huimin Department of Engineering, Nanjing Agricultural University China Zhang Wei Airport College, Civil Aviation University of China China 3 32-003 0509-036 Study on Straw Movement in Straw-soil-rotary Blade System with Simulation Based on Distinct Element Method 4 32-004 0509-042 A Study on the Dynamic Stability of Full Type Single Section Scissor Lift 5 32-005 0509-050 Volatilization and Coverage Li Hui Study of Spray Liquid on College of Engineering, China Different Property Crop Surfaces Agricultural University Belgium 0514-004 Effects of Different Type and Structural Parameters' Subsoiling Liu Junan Shovels on Soil Physical College of Engineering, China Characteristic in China Northeast Agricultural University Area China 0514-005 Effects of Different Subsoiling Liu Junan Shovels on Soil Physical College of Engineering, China Characteristic in China Northeast Agricultural University Area China 6 7 32-006 32-007 99 8 9 10 11 12 13 14 15 32-008 32-009 32-010 32-011 32-012 32-013 32-014 32-015 0514-006 Study on the Multi-plate’s Vibration System of the Needle Plug Tray Planter Du Ren Mechanical Engineering Department, North China Institute of Airspace Engineering China 0526-009 Performance Values of a Disk Chipper During Working with Pomegranate Pruning Residues Mete Yigit Akdeniz University Faculty of Agriculture Department of Agricultural Machinery Antalya Antalya 2014-0067 Design on 2MBYZ-3/6 Selfpropelled Mulch Precision Seeder with Corn Seed Production Liu Lijing Chinese Academy of Agriculture Mechanization Sciences, Beijing, China China 2014-0068 3D Reverse Engineering Study of Seed Tube Based on Geomagic Spark Liu Lijing Chinese Academy of Agriculture Mechanization Sciences, Beijing, China China 2014-0087 Design and Experiment on Rot Quickly Deep Buried by The Returning Device of Rice Stalk Ge Yiyuan College of Mechanical Engineering, Jamusi University, Jamusi, China China Dong Xiangqian Optimizing The Performance of College of Engineering, Granular Fertilizer Spreader with China Agricultural University, Cone Disk Beijing, China China 2014-0094 Research and Development on Vibration Spacing Scarifier for Meadow Dong Xiangqian College of Engineering, China Agricultural University, Beijing, China China 2014-0106 Experimental Analysis and Research on Key Parts of Removing Solid Ice and Snow Li Yaqin Biological and Agricultural Engineering, Jilin University,Changchun,China China Li Yaqin College of Mechanical Engineering, Jamusi University, Jamusi, China China 2014-0093 16 32-016 2014-0108 Analysis on Formation Process and Failure Mechanism of Compacted Snow 17 32-017 2014-0116 Advance Research of Tray Precision Sowing Equipment Zhao Zhengbin Modern Agricultural Equipment co., Ltd China 2014-0125 The Performance Detection of Tray Precision Seeder Based on Machine Vision Technology Zhao Zhengbin Modern Agricultural Equipment co., Ltd,Beijing 100083,China China 18 100 32-018 Mao Xin Engineering College, Heilongjiang Bayi Agricultural University, Daqing 163319, China China 19 32-019 2014-0154 Experimental study on the filling performance of maize bowl-tray precision seeder 20 32-020 2014-0157 Design and Test of The Device From Apple Seedling Root Soil Li Jianping Agricultural University of Hebei China 2014-0163 Simulation and Experimental Study on Pulverizer Performance of Reversal Rotary Tiller Based on Discrete Element Method Xie Zhenfeng Jiangsu University China Wu Weixiong South China Agricultural University China 21 32-021 22 32-022 2014-0208 Research Progress of Mechanized Strip Compound Planting System of Wheatmaize-soybean 23 32-023 2014-0225 Fault Characteristics Analysis of 2BFQ-6 Precision Planter for Rapeseed Liao Yitao Huazhong Agricultural University China 24 32-024 2014-0234 Use of A Specifically Designed Information System to Manage Agricultural Plastic Waste Fluxes Evelia Schettini University of Bari Italy 2014-0237 Effects of Integrated Use of Organic Manure and Chemical Fertilizer on Yield, Quality of Tea and Soil Nutrient Content Li Pingping Jiangsu University China 2014-0238 Carrot Cultivation and Situation of Mechanization Technology in China and Abroad Li Kaifeng Chinese Academy of Agricultural Mechanization Sciences Beijing, 100083, China China 2014-0328 Advanced Design of No-tillage Hill Seeder Lin Yuexiang Qingdao Agricultural University China Zhai Jianbo Huazhong Agricultural University China 25 26 27 32-025 32-026 32-027 28 32-028 2014-0329 Design and Experiment of Combing Plate and Push Rod Combined Pneumatic Seed Metering Device for Rice 29 32-029 2014-0360 Parameters Study of Aluminum Alloy Roller Barrel by Friction Stir Welding Feng Tiantao Shandong Agriculture University China 30 32-030 2014-0416 Design and Experiment on Friction Wheel Transmission for No-till Planter Jia Honglei Jilin University China 101 31 32 32-031 32-032 2014-0419 Development of Lifting Platform for Orchards in Hill Area Fan Guiju College of Mechanical and Electrical Engineering, Shandong Agricultural University, Tai’an 271018, China 2014-0422 Agricultural Mechanical Components Research Based on Materials of Integrated Bionic on Animal Scales Qu Wenjing Jilin University China Jiang Xinming College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China China China 33 32-033 2014-0423 Design and Experiment on Gear-tooth Rootstalk Cutting Mechanism of No-tillage Seeder 34 32-034 2014-0424 Theoretical Analysis and Experimental Research on Elastic Press Wheel Jia Honglei Jilin University China 35 32-035 2014-0427 Effect of Subsoiling on Soil Water Content Jia Zhuo Jilin University China China 36 32-036 2014-0431 Orthogonal Experiment of Loss Sowing Alarm System Based on Capacitive Sensor Qi Jiangtao Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, 130022 China 37 32-037 2014-0432 Optimization and Test of the Profiling Elastic Press Roller Jia Honglei Jilin University China 38 32-038 2014-0433 Experiment Research on FSB1900 Pickup Baler Jia Honglei Jilin University China 2014-0434 Experiment on Working Performance of Variable Rate Fertilizer and Subsoiling Machine Jia Honglei Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University China 2014-0435 A Study on Soybean Mechanical Precision Seedmeter in China Based on Analysis of Soybean Precision Seeding in the United States Jia Honglei Jilin University China Qi Bing China Agricultural University, China Guan Meng Shenyang Agricultural University China 39 40 32-039 32-040 41 32-041 2014-0440 Optimization Design and Experiment of Seed Eliminator in A Centralized Pneumatic Metering Device for Maize 42 32-042 2014-0442 Effect of Curing Time in Field on Moisture Content and Mechanical Strength 102 43 44 45 46 47 48 49 50 51 52 53 32-043 32-044 32-045 32-046 32-047 32-048 32-049 32-050 32-051 32-052 32-053 Effects of Structural Parameters of Seed Tube and Working Yang Li Parameters of A Centralized College of Engineering, China Drum Planter on The Uniformity Agricultural University of Seed Distribution China 2014-0462 Design and Experiment of Combined Disc Air-assisted Orchard Sprayer Zhou Liangfu Nanjing Research Institute for Agricultural Mechanization Ministry of Agriculture China 2014-0489 Design and Experimental Research on the Film-coveredfertilizer transplater Chi Minglu College of Mechanical and Electrical Engineering, Inner Mongolia Agricultural University China 2014-0493 Study and Experiment on Structure of Metering Hole of Centralized Centrifugal Precision Metering Device for Rapeseed Cao Xiuying Huazhong Agricultural University China 2014-0496 Design and Experiment on Roots-soil Separating Mechanism of Fibrous Root Crops Wu Tao College of Engineering, South China Agricultural University China 2014-0518 Structural Analysis and Experiment of A Transplanter for Corn Seedlings Growing in Paper-tubes Yang Li College of Engineering, China Agricultural University, Beijing China China 2014-0521 Design and Experiment of An Automated System for Transplanting Potato Tissue Culture Seedlings Yang Li College of Engineering, China Agricultural University, Beijing China China 2014-0527 Design and Finite Element Analysis of A Wheel of The Wheel Wake Wang Junyue Hohhot Branch of Chinese Agricultural Mechanization Sciences, Hohhot, China China 2014-0529 The development of the small rotary electric ditching testing machine Zhou Yang Key Laboratory of Key Technology on Agricultural Machine and Equipment, Ministry of Education, South China Agricultural University China 2014-0537 Experimental Study on Characteristics of Plant Morphological Parameters about Different Rape Varieties for Transplanting Liu Mingfeng College of Engineering, Huazhong Agricultural University China 2014-0590 Non-Destructive Measurement of Rice Biomass and a Prediction Model Liu Cuihong College of Engineering, Shenyang Agricultural University China 2014-0450 103 54 32-054 2014-0630 Design and Experiment of 1KY40 Hydraulic Drive Ditcher For Farmland Conduit Wu Guangwei National Research Center of Intelligent Equipment for Agriculture China Wang Lixin Hebei University of Science and Technology China 55 32-055 2014-0638 Anti-attachment Function of Slippery Zones in Nepenthes Pitchers and Its Application in Biomimetic Developing Agricultural Pest Trapping Plate 56 32-056 2014-0658 Development of A Dry Land Automatic Transplanter for Plug Seedlings 2014-0661 Optimal Design and Simulation Analysis on a Sowing Depth Control Unit for Corn Precision Planter Zhang Rui China Agricultural University China Ji Wenfeng Huazhong Agricultural University China 57 32-057 Cui Wei China 58 32-058 2014-0665 Study on Seedling Seperation Device of Artemisia Arborescens Transplanter Based on Vibration Mechanism 59 32-059 2014-0677 Research method on the interaction between soil and tillage components Ma Xing Shenyang Agricultural University China 2014-0690 Experimental Study on The Characteristics of Solar Drying Bale Du Jianqiang Chinese Academy of Agricultural Mechanization Sciences China 2014-0727 Proposed Installation of A Agroindustries Drying of Pink Pepper (Aroeira) Ricardo Oliano de Carvalho Agricultural Engineer, Federal University of Pelotas Brazil Ricardo Oliano de Carvalho Agricultural Engineer, Federal University of Pelotas Brazil 60 61 32-060 32-061 62 32-062 2014-0728 Economic Feasibility of Strawberry Production in Semihydroponic System and Agro Industry of Jelly on A Small Propriety 63 32-063 2014-0729 Hydroponic Lettuce Minimally Processed Production Ricardo Oliano de Carvalho Agricultural Engineer, Federal University of Pelotas Brazil Liu Fei College Of Mechanical And Electrical Engineering,Inner Mongolia Agricultural University China 64 32-064 2014-0749 Design of Scooping Plastic Film Mulch Planter and Seeding Performance Test of Cotton 65 32-065 2014-0755 Experimental Study of InsideCui Tao filling Air-blowing Precision Department of Engineering, Seed Metering Device for Maize China Agricultural University 104 China Chai Lifa College of Mechanical and Electrical Engineering, Agricultural University of Hebei China 66 32-066 2014-0766 Combined Driving System Design for Ultra Low Speed Working of Orchard Ditcher 67 32-067 2014-0828 The CFD Simulation of Droplet Trajectory in Greenhouse Wang Jingxu Department of Engineering, China Agricultural University China Shu Shifu Institute of Agricultural Engineering, Jiangxi Academy of Agricultural Sciences China 68 32-068 2014-0845 Analysis of Causes on Growth Duration Prolonged with Machine Transplanting in Double Cropping Late Rice 69 32-069 2014-0884 Experimental Study on Material Characteristics of Rice Bud Seed Zhang Shun, College of Engineering, Huazhong Agricultural University China 2014-0910 Status of Agricultural Mechanization in Southwestern China : a Case Chen Jian College of Engineering and Technology, Southwest University China 2014-0913 Research on Movement and Simulation Platform of Wine Grape Vibration-separation Mechanism Yuan Panpan College of Mechanical and Electrical Engineering, SHIHEZI University, Shihezi, China China 2014-0929 Li Yonglei Institute of Agricultural Study on Technology Integration Products Processing for Corn Seed Scale Processing Engineering, Chinese Academy of Agricultural Engineering China Fang Huimin Department of Engineering, Nanjing Agricultural University China 70 71 72 32-070 32-071 32-072 73 32-073 2014-0932 Simulation of straw movement by the Distinct Element Method 74 32-074 2014-0943 Design and Test of Alfalfa Flattening Test Bench Zhao Jianzhu College of Engineering, China Agricultural University China 2014-0945 Air Flow Field Analyse and Dynamic Research on Seeds Pick-up Process for A Levelsucker Precision Seeder Liu Cailing College of Engineering, China Agrilcutral University China 2014-0986 Design and Study on Metering Device of Pneumatic Grass Seeder Zhai Gaixia Hohhot Branch of Chinese Academy of Agricultural Mechanization Sciences China 2014-0988 Effects of the Tillage Systems in Wheat Cultivation on Soil CO2 Emission Zeliha Bereket BARUT Çukurova University, Faculty of Agriculture, Department of Agricultural Machinery Turkey 75 76 77 32-075 32-076 32-077 105 78 32-078 2014-1017 Effects of Tillage Systems on Energy Use for Wheat-Soybean rotation in Southern Turkey Zeliha Bereket BARUT Cukurova University, Faculty of Agriculture, Department of Agricultural Machinery Turkey Zhang Hua College of Mechanical and Electronic Engineering, Nanjing Forestry University China 79 32-079 2014-1029 Stability and Reliability Analysis of Valve Controlled Hydraulic Motor Power System for Flexible Chassis for Pesticide Sprayer 80 32-080 2014-1036 Design and Experiment of No-till Wheat Seeder under Controlled Traffic Farming System Wang Qingjie College of Engineer; China Agricultural University China 2014-1113 Effect of Moisture Content on Molding of Vegetable Nutrient Nursery Block Song Yuqiu College of Engineering, Shenyang Agricultural University China 2014-1144 Prespects of Creating a Biopesticide Based on Bacillus Bacteria and Plant Extracts Olga Shemshura Institute of Microbiology and Virology, Committee of Science, Ministry of Science and Education Russia Hu Jianping Key Laboratory of Modern Design and Experiment of Agricultural Equipment and Precision Suction Plate Metering Technology, Ministry of Device for Super Hybrid Rice Education&Jiangsu Province, Jiangsu University China 81 82 83 84 85 86 32-081 32-082 32-083 32-084 32-085 32-086 2014-1172 2014-1199 Modal Analysis and Test of Returning Machine Knife Roll Based on Pro/E and ABAQUS Ge Yiyuan College of Mechanical Engineering,Jamusi University China 2014-1201 Construction of Dynamic Ion Flux Detecting Device in Plants Based on 3D Micro-imaging Method Hou Peichen Beijing Research Center for Information Technology in Agriculture China 2014-1213 The Design and Experimental Study of Self-driven Stubble Ploughing Machine Hu Jun Department of Engineering,Heilongjiang BA YI Agricultural University China China China 87 32-087 2014-1214 Finite Element Analysis and Improvement of Subsoiler Hu Jun Department of Engineering,Heilongjiang BA YI Agricultural University 88 32-088 2014-1243 Study on Crank Rocker Type Plastic Film Collecting Machine Hou Shulin College of Engineer,China Agricultural University 106 89 32-089 2014-1279 Mechanism Analysis and Motion Simulation of Vegetable Transplanter with Planetary Bevel Gear Train 90 32-090 2014-1340 Research on the Microstructure and Properties of Laser Cladding SiC/Ni Coating Xu Yang College of Engineer; China Agricultural University China 2014-1379 The Research of Common Mountain Orchard Transport Test System Construction on Experiment Platform Li Shanjun College of Engineering, Huazhong Agricultural University China 2014-1441 Design and Testing of 2BFD-2 type Peanut Planter Combined with Laying Drip Irrigation Pipe and Plastic Mulch Wang Ruili College of Engineering, Shenyang Agricultural University, Liaoning, China China 2014-1471 The Progress and Key Technical Analysis of Corn No-tillage Planter Lin Jing college of engineering, Shenyang agricultural university China 2014-1504 The Experimental Research and Analysis of the Seed- Meter Device of the Precision Spaced Planter for Corn Wang Dongwei Menoble co.ltd, Beijing China 2014-1536 Flow Field Simulation Analysis of Side Positive Pressure Seeding Mechanism and Study on Working Parameters Zhang Dongxing College of Engineering, China Agricultural University China 2014-1603 Straw Returning Rotary Tiller for Wet Land and Dry Land Zhang Jumin College of Engineering, Huazhong Agricultural University China 2014-0933 Application of Reaction Nitrogen Arc Cladding TiCN/Fe Metal Ceramic Composite Coating for Cutter of Agricultural Machinery Li Jianchang Department of Mechanical and Electrical Engineering, Agricultural University of Hebei China Xie Jianhua China Agricultural University China 91 92 93 94 95 96 97 32-091 32-092 32-093 32-094 32-095 32-096 32-097 Wang Yongwei, School of Biosystems Engineering and Food Science, Zhejiang University China 98 32-098 2014-1140 Study on the Interactions of Spring-Tooth and Plastic Films Based on Physical and Mechanical Properties of plastic film 99 32-099 2014-0235 Design and optimization of straw-cleaning blade of notillage seeder Wu Guangwei Northeast Agricultural University China 0526-011 Wear resistance of ion implanting tungsten carbide on 65Mn steel used as harrow disk Yang Hai College of mechanical and electrical engineering, Northeast Forestry University China 100 32-100 107 101 32-101 0526-027 Application Status and Development Prospects of Effective Plant Protection Machinery 102 32-102 2014-0376 Innovative Design and Experimental Research on Selfsuction Jet Aerator Chen Jianneng Zhejiang Sci-Tech University China 103 32-103 2014-0472 Motion Analysis and Simulation Optimization of Rod Type Conveyor Based on Adams Wang Fangyan Qingdao Agricultural University China 2014-0505 Studied on the Automatically Catching Mechanism of Potted-seedling for Vegetables Transplanter Yang Chuanhua Chinese Academy of Agricultural Mechanization Sciences China 2014-0701 Based on Pro/E and ANSYS Workbench improvement after the deep loose plough shovel force analysis Wang Ziyang Jiamusi University China 2014-0952 Experimental study on mixing performance of jet-mixing apparatus Qiu Baijing Institute of Agricultural Engineering, Jiangsu University China 2014-0693 Comparison Study of Application Effect on Three Rice Transplanters in Double Cropping Rice Area Xiao Liping Jiangxi Agricultural University China 2014-1438 Experimental study on the performance of different forms of seed corn seed Sun Shiming Heilongjiang Provincial Academy of Agricultural Machinery Engineering Science China Research on tensile mechanical properties of the greenhouse cucumber cane Xu Yunfeng Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education and Jiangsu Province,Institute of Agricultural Engineering , Jiangsu University China 104 105 106 107 108 109 108 32-104 32-105 32-106 32-107 32-108 32-109 2014-0339 Zhou Haiyan Modern Agricultural Equipment CO.LTD China THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION IV ENERGY IN AGRICULTURE 109 Overview of Session IV: Energy in Agriculture Monday, Sept. 15 08:00-20:00 Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:30-09:30 Opening Ceremony Location:Plenary Hall B, CNCC 09:30-09:40 Tea Break 09:40-12:10 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC 12:10-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 Technical Presentation Location: 308,CNCC 15:00-15:15 Tea Break 15:15-17:15 Technical Presentation Location: 308,CNCC 19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC Tuesday, Sept. 16 08:30-10:00 Technical Oral Presentation Sub-session I Location: 405,CNCC 10:00-10:15 10:15-11:15 Technical Oral Presentation Wednesday, Sept. 17 12:00-13:30 13:30-15:00 Technical Oral Presentation Tea Break Sub-session I Location: 405,CNCC 19:30-21:30 08:30-10:00 Technical Oral Presentation Sub-session I Location: 405,CNCC Friday, Sept. 19 110 Sub-session II Location: 406,CNCC Tea Break Sub-session I Location: 405,CNCC Sub-session II Location: 406,CNCC Chinese Cultural Night Location:Beijing Performance & Arts Centre Sub-session I Location: 405,CNCC 10:00-10:15 10:15-11:45 Thursday, Sept. 18 Technical Oral Presentation Sub-session II Location: 406,CNCC Lunch Location:Plenary Hall A, CNCC 15:00-15:15 15:15-16:30 Technical Oral Presentation Sub-session II Location: 406,CNCC Tea Break Sub-session I Location: 405,CNCC 16:00-17:00 Closing Ceremony Location:309A+B, CNCC 19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC 08:00-15:00 Technical Tours OPENING CEREMONY OF SESSION IV ENERGY IN AGRICULTURE 18TH WORLD CONGRESS OF CIGR ORAL PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-17:15 Location: Room 308, the 3rd Floor of CNCC Chair: Prof. Axel Munack, Professor of Thuenen Institute of Agricultural, Germany Time 13:30-14:00 14:00-14:30 14:30-15:00 Paper # Technical Presentations 0826-401 Nutrient recovery for a new generation of anaerobic digestion technologies Dr. Shulin Chen Professor of Department of Biological Systems Engineering, Department of Biological Systems Engineering Washington State University, USA 0826-403 The potential economical competitiveness of diatom based Bio-Crude Dr. Jawkai Wang President of Jawkai Bioengineering R&D Center, USA 0826-402 Carbon capture and sequestration-A technology who's time has come? Prof. Bill A. Stout Honorary President of CIGR, USA 15:00-15:15 Tea Break Location: Chair: Room 308, the 3rd Floor of CNCC Prof. Shulin Chen, Professor of Department of Biological Systems Engineering, Department of Biological Systems Engineering, Washington State University, USA Time 15:15-15:45 15:45-16:15 Paper # Technical Presentations 0826-404 Renewable energies in agriculture Prof. Axel Munack Professor of Thuenen Institute of Agricultural, Germany 0826-405 Development of RCD protection technology of rural power network in China Prof. Songhuai Du Deputy-dean of Information and Electrical Engineering College, China Agricultural University, China 111 16:15-16:45 16:45-17:15 0826-406 Green packaging materials Prof. Radhey LAL. Kushwaha, University of Saskatchewan, Canada 0826-407 The developing trend and application analysis of the stand-alone wind generator Prof. Qingzhi Zhai Deputy Director of Electrical and Information Experiment Teaching Centre, China Agricultural University, China SEPTEMBER 17, 2014 WEDNESDAY MORNING 08:30-11:30 Session No. 1 Location: Room 405, the 4th Floor of CNCC Chair: Prof. Guangnan Chen, Professor of National Centre for Engineering in Agriculture, University of Southern Queensland, Australia Time 08:30-08:45 08:45-09:00 09:00-09:15 09:15-09:30 09:30-09:45 112 Paper # Technical Presentations 2014-0846 Microwave-assisted decarboxylation and cyclization of potassium stearate with magnalium hydrotalcite catalysts and renewable hydrocarbon fuel production Yuhuan Liu, Yingyu Liu, Yunpu Wang, Yingkuan Wang, Rongsheng Ruan Nanchang University, China 2014-0568 A review on the application of near-infrared spectroscopy to crop straw analysis Zengling Yang, Junjie Xue, Lujia Han China Agricultural University, China 2014-0243 A solar absorption cooling system for greenhouse climate control: technical evaluation Giuliano Vox University of Bari, Italy 2014-0252 The structure changing of caragana microphyllain Biomass Zebing Xing Shanxi Agriculture University, China 2014-0576 Effects of preheating temperature on the compacting characteristics of the pellets made from corn stalk powder Xuewei Bai, Juan Liu, Yongkui Li Shenyang Agricultural University, China 10:00-10:15 Tea Break Location: Chair: Room 405, the 4th Floor of CNCC Prof. Giuliano Vox, Professor of Department of Agricultural and Environmental Science, Italy Time 10:15-10:30 10:30-10:45 10:45-11:00 11:00-11:15 11:15-11:30 Paper # Technical Presentations 2014-0860 Process conditions optimization of soybean wastewater treatment and biomass recovery by yeast Haifeng Lu China Agricultural University, China 2014-0560 Application of tobacco stems briquetting in flue-cured tobacco: a case of China rural place Xinfeng Wang, Guichuan Xu, Bailiang Zhang, Yaosong Guan, Haifeng Lu, Baoming Li China Agricultural University, China 2014-0071 Benchmarking energy use in agriculture Prof. Guangnan Chen University of Southern Queensland, Australia 2014-0174 Estimation of gross calorific value of rice straw from proximate and ultimate analysis using artificial neural Shaoping Qian Zhejiang University, China 2014-0552 energy efficient rural food processing utilising enewable energy to improve livelihoods Andrew Kallon Session No. 2 Location: Chair: Room 406, the 4th Floor of CNCC Prof. Songhuai Du, Deputy-dean of Information and Electrical Engineering College, China Agricultural University, China Time 08:30-08:45 08:45-09:00 Paper # Technical Presentations 2014-1227 A novel three layers micro-grid cluster control system based on IEC61850 communication system Zhiyuan Sun, Tianjun Jing, Jiangbo Wang, Haijiang Du College of Information and Electrical engineering, China Agricultural university, China 2014-1014 Load curve analysis based on fuzzy clustering and fuzzy pattern recognition Bilin Xiao College of Information and Electrical Engineering, China Agricultural University, China 113 09:00-09:15 09:15-09:30 09:30-09:45 09:45-10:00 2014-1224 Based on state feedback and parameter self-tuning battery SOC algorithm research Zhi Wang, Yunfeng Tang, Jinfang Hu College of Information and Electrical engineering, China Agricultural university, China 2014-1274 The optimal allocation of distribution generations in micro-grid based on the economic and environmental evaluation Dechang Yang, Cong Wu, Xin Ma College of Information and Electrical Engineering, China Agricultural University, China 2014-0647 Flow field simulation and structure optimization of concentrated wind energy turbine De Tian, Xiaoe Mao, Ying Deng, Bochao Sang, Junjie Lin North China Electric Power University, China 2014-1510 Transformation a biogas mixture into biomethane by the absorption tower of CO2 Shimizu Naoto Hokkaido University, Japan 10:00-10:15 Tea Break Location: Room 406, the 4th Floor of CNCC Chair: Prof. Wei Tang, Professor of College of Information and Electrical Engineering, China Agricultural University, China Time 10:15-10:30 10:45-11:00 11:00-11:15 11:15-11:30 114 Paper # Technical Presentations 2014-1631 Effects of icing on aerodynamic performance of wind turbine blade by wind tunnel test and numerical simulation Yan Li, Shaolong Wang, Jing Tang, Qindong Liu, Fang Feng Engineering College, Energy engineering, Northeast Agricultural University, China 2014-0323 The off grid application of Chinese small wind generators Prof. Dechang Sheng Chinese Wind Energy Equipment Association, China 2014-1374 Research on solar energy absorption characteristics and optical mechanism of several kinds of butterfly Liyan Wu Shenyang Agricultural University, China 2014-1636 Study on The Law of Flooding and Releasing Heat of Solar Heat Pipe Filled with Phase Change Materials (PCMs) in Greenhouse Yong Wu SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 13:30-16:30 Session No. 1 Location: Room 405, the 4th Floor of CNCC Chair: Mustafa A. M., Zhejiang University, China Time Paper # Technical Presentations 0618-078 Renewable energy effect on sustainable development of the food industry Gerasimos Martzopoulos Aristotle University of Thessaloniki, Greece 13:45-14:00 2014-1132 Experiment on influencing factors of cutting performance of cotton stalk cutting knife Zhanhua Song, Fade Li Shandong Agricultural University, China 14:00-14:15 2014-0072 Alternative energy sources for cotton production in Australia Guangnan Chen, University of Southern Queensland, Australia 0509-010 Evaluation of the vulnerability and economic feasibility of electric vehicle charging infrastructures based on gas stations in Korean rural areas Solhee Kim Seoul National University, Korea 2014-0853 Study on analysis methods for fermentable sugar in sweet sorghum stalks Guifang Fan, Yan Jiang, Weiliang Xu, Peipei Li, Shizhong Li Tsinghua University, China 13:30-13:45 14:15-14:30 14:30-14:45 15:00-15:15 Tea Break Location: Room 405, the 4th Floor of CNCC Chair: Guifang Fan, Engineer of Tsinghua University, China Time 15:15-15:30 Paper # Technical Presentations 2014-0447 Fungal pretreatment of rice straw for enhancing biogas production from solid-state anaerobic digestion Mustafa A. M., Kuichuan Sheng Zhejiang University, China 115 2014-0804 Effects of trace metal elements on dry anaerobic fermentation of corn stalk Ling Zhao Shenyang Agricultural University, China 2014-1585 Performance analysis of a solar thermal heat pump system for biogas digester heating Huixian Shi, Xingjian Sun Modern Agricultural Science and Engineering Institute, Tongji University, China 16:00-16:15 2014-0221 Biocatalysts in biogas processes for higher resource and energy efficiency Ulrike Schimpf, Ronald Schulz, Alexander Schrader Institute of Agricultural and Urban Ecological, Germany 16:15-16:30 2014-0341 Development of biodegradable biomass board using rice stalk Xiulun Wang, Jin Zhang, Koji Kito, Takaaki Suzuki Mie University, Japan 15:30-15:45 15:45-16:00 Session No. 2 Location: Chair: Room 406, the 4th Floor of CNCC Cengiz Akdeniz, Department of Agricultural Machinery, Faculty of Agriculture, EGE University, Turkey Time 13:30-13:45 13:45-14:00 14:00-14:15 14:15-14:30 14:30-14:45 116 Paper # Technical Presentations 2014-0047 The optimal allocation of distribution generations in micro-grid based on the economic and environmental evaluation Axel Munack Thünen Institute of Agricultural Technology, Braunschweig, Germany 2014-1142 Advances in comprehensive utilization of algae residues Sha Li, Guochen Zhang, Xiuchen Li Dalian Ocean University, Chian 0514-013 Biodiesel production from waste cooking oil in Mongolian condition Bolor-Erdene Master student School of Engineering, Mongolian State University of Agriculture, Mongolia 2014-0760 Conversion of enteromorpha prolifera to bio-crude oil through hydrothermal liquefaction Jianwen Lu Laboratory of Environment-Enhancing Energy (E2E), College of Water Resources and Civil Engineering China Agricultural University, China 2014-0780 Biochemical analysis of university kitchen waste and its potential for sustainable bio-crude oil conversion through hydrothermal liquefaction Zhi Qu Laboratory of Environment-Enhancing Energy(E2E), College of Water Resources and Civil Engineering China Agricultural University, China 15:00-15:15 Tea Break Location: Room 406, the 4th Floor of CNCC Chair: Prof. Axel Munack, Professor of Thuenen Institute of Agricultural, Germany Time 15:15-15:30 15:30-15:45 15:45-16:00 16:00-16:15 Paper # Technical Presentations 2014-0867 Harvesting reducing sugars and organic acids from xylan and cellulose through hydrothermal liquefaction Zhangbing Zhu Laboratory of Environment-Enhancing Energy (E2E), and Key Laboratory of Agricultural Engineering in Structure and Environment, Ministry of Agriculture, College of Water Resources and Civil Engineering, China Agricultural University 2014-1136 Detection in situ of pigments in microalgae using Vis/NIR spectroscopy and chemometrics Pan Jian College of Biosystems Engineering and Food Science, Zhejiang University, China 0512-004 The effect of die dimension and die speed on olive cake pelletizing Cengiz Akdeniz Department of Agricultural Machinery, Faculty of Agriculture, EGE University, Turkey 2014-0671 A research on briquetting of greenhouse pepper crop residues Sefai Bilgin, Hasan YILMAZ, Abdülkadir KOÇER Faculty of Agriculture, University of Akdeniz, Turkey SEPTEMBER 18, 2014 THURSDAY MORNING 08:30-11:45 Location: Room 405, the 4th Floor of CNCC Chair: Haifeng Lu, China Agricultural University, China Time Paper # 08:30-08:45 2014-1428 Design of agitating charring kiln for biomass Baofeng Zhang, Mingjin Xin, Wentao Ren, Jun Meng College of Engineering Shenyang Agricultural University, China 2014-0107 Design and experiment of integration grinder with draw out the device Mingyou Wang Nanjing Agricultural Machinery Research Institute, China 2014-0589 Design of domestic photovoltaic cell tracking device and its application in electric heating system Lidi Wang Shenyang Agricultural University, China 08:45-09:00 09:00-09:15 Technical Presentations 117 09:15-09:30 09:30-09:45 2014-0598 A study of straw pot decomposition in soil Jiapei Zha, De Gao Ningbo institute of Technology, Zhejiang University, China 2014-0982 Screening of high efficient cellulose-degrading microorganisms and construction of microbial community for digestion residue aerobic composting Qiaoyin Zhu Northeast Agricultural University, China 10:00-10:15 Tea Break Location: Room 405, the 4th Floor of CNCC Chair: Prof. Dechang Sheng, Professor of Chinese Wind Energy Equipment Association, China Time 10:15-10:30 10:30-10:45 10:45-11:00 11:00-11:15 11:15-11:30 11:30-11:45 118 Paper # Technical Presentations 2014-0862 Natural light-microaerobic condition for PSB wastewater treatment and biomass resource recovery technology Haifeng Lu College of Water Resource and Civil Engineering, China Agriculture University, China 2014-1350 Carbon-rich substrates for boosting manure-biogas: a consequential life cycle assessment Lorie Hamelin, Irina Naroznova, Henrik Department of Chemical Engineering, Biotechnology and Environmental Technology, University of Southern Denmark, Denmark 0523-015 Preliminary evaluation of Chlorella vulgaris cultivation using hydrothermal liquefaction wastewater Guoyang Yuan College of Water Resource and Civil Engineering, China Agriculture University, China 2014-0390 Quantitative characterization of gas emissions during rape straw firing using TG-DSC-MS technology Qiulin Ma, Lujia Han, Guangqun Huang, China Agricultural University, China 2014-1100 Pyrolysis characteristic of pine nut shell and its activated carbon preparation Gang Wang, Enchen Jiang, Mingfeng Wang, Dongdong Shi, Qian Ma, Min Ye, Xinhui Guo, Shijun Zhang, Shibo Li College of engineering, South China Agricultural University, China 2014-0478 Study on the products distribution and properties of product wood vinegar of pine nut shell continuous pyrolysis Enchen Jiang, Chenxi Zhao, Liyuan Qin, Aihui Chen Northeast Agricultural University, China SESSION IV POSTER SESSIONS SEPTEMBER 16, TUESDAY 13:30 - 17:00 Topic (1) No. 86 87 Poster # 41-001 41-002 Material pretreatment and energy comprehensive research Paper # Paper Titles Name & Institution Country 0506-001 Effects of Different Mixed Ratio of Maize Straw and Crop Straw on Silage Quality Ren Haiwei Western China Energy & Environment Research Center, Lanzhou University of Technology China 0506-002 Effect of Different Additives on The Silage Quality of Corn Stover and Lettuce Leaves Ren Haiwei Western China Energy & Environment Research Center, Lanzhou University of Technology China Slovakia 88 41-003 2014-0062 Effect Of Drilling Quality On Biomass Yield Maga Juraj Department of Machines and Production Systems, Faculty of Engineering, Slovak University of Agriculture in Nitra 89 41-004 2014-0179 Transport Efficiency of Straw For Energy Utilization Krocko Vladimir Slovak University of Agriculture in Nitra Slovakia 41-005 2014-0461 A Novel Dynamic Modulate and Optimal Control Scheme for a Tidal Current Energy Converter Zhang Huidi Zhejiang University China 91 41-006 Evaluation on Different Modes of Rural Energy Project for 2014-0548 Large-scale Crop Residues Utilization in China Ai Ping The College of Engineering, Huazhong Agricultural University, Wuhan 430070,China China 92 41-007 2014-0691 90 93 41-008 2014-1388 Research on Ice-melting Wang Shuwen Method of Line Carrying Load Northeast Agriculture University Preparation of Xylooligosaccharides Producing Solid Waste based Biodegradable Seedling Pots Si Weiwei Chinese Academy of Agricultural Mechanization Sciences China China 119 94 Peng Fei College of Engineering,China Agriculture University China 41-010 Synthesis and Characterization of Starch-based Cationic 2014-0928 Flocculants for Harvesting Microalgae Cheng Yanling Beijing Union University China 41-011 2014-0640 Study on the mode of straw supply in the energy utilization Huo Lili Chinese Academy of Agricultural Engineering China 41-009 2014-0709 95 96 Effect of Moisture Content and Particle Size on Friction Characteristics of Barley Meal Topic (2) No. 97 98 99 100 101 102 103 120 Poster # Biomass energy utilization Paper # Paper Titles Name & Institution Country 0506-003 Optimizing Dilute-acid Hydrolysis (DACH) of Distillers Grains and Ethanol Fermentation Ren Haiwei Western China Energy & Environment Research Center, Lanzhou University of Technology China 0509-029 Optimizing Dilute-acid Hydrolysis (DACH)of Distillers Grains and Ethanol Fermentation Pei Fangxia Western China Energy & Environment Research Center, Lanzhou University of Technology China 42-003 2014-0025 Design and Experiment on Biomass Pellet Densifying Machine for Residue Wang Mingyou, Nanjing Research Institute of Agricultural Mechanization,Ministry of Agriculture China 42-004 The concept of small biogasplants – An evaluation of 2014-0151 efficiency, economic feasibility and strategic fit to livestock farms Frauke P. C. Müller, University of Bonn Germany 42-005 2014-0354 Study of the Influence Mechanism of the Supernatant Recycling on a Two-phase Anaerobic Fermentation Producing H2 and CH4 Wang Yuanyuan, Huazhong Agriculture University China 2014-0429 Experimental Study on Dense Performance of Straw Annular Mould Forming Fuel Yi Wenyu, Sichuan Research & Design Institute of Agricultural Machinery China 2014-1153 Wet Semi-continuous Anaerobic Methane Fermentation of Food Waste Fed with High Solids Content of Feedstock for Saving Water Wang Ming, Engineering College of Northeast Agricultural University, Harbin 150030 China 42-001 42-002 42-006 42-007 104 42-008 2014-0571 Research Progress of Compressing Technology on Alfalfa Topic (3) No. 105 106 107 108 Poster # 43-001 Paper # 0514-007 109 110 111 112 Name & Institution Energetic Efficiency of the Composting Process of the Solowiej Piotr, Head Cabbage Waste Mixed Department of Technical with Wheat Straw and Spent Sciences, University of Warmia Coffee Grounds in Dependence and Mazury on the Additives Structure Effects of Mixture Ratio of Cow Manure and Greenhouse Wastes on Anaerobic Codigestion Process Osman YALDIZ, Akdeniz University 43-002 2014-0207 43-003 The Effects of The Proportion of Mushroom Residue and Swine Zhang Junfeng, Manure on The Temporal and 2014-0611 Wuhan Institute of Agricultural Spatial Characteristics of The Mechanization Science Aerobic Fermentation Temperature under Forced Ventilation 43-004 2014-1442 Poster # 44-001 44-002 44-003 44-004 China Compost Paper Titles Effects of Adding Urea and Inorganic Salts Soil on Straw Anaerobic Digestion Topic (4) No. Guo Lei, College of Engineering, China Agricultural University, Beijing, China Country Poland Turkey China Duan Na, College of Water Resources & Civil Engineering, China Agricultural University China Pyrolysis Paper # Paper Titles Name & Institution Country 0618-081 Energetic Use of Solid Products of Pyrolysis Technology Pavel Kic, Faculty of Engineering, Czech University of Life Sciences, Prague Czech Republic 2014-0577 Pyrolysis Characteristics of Cattle Manure Based on Components Xin Ya, Department of Engineering, Agricultural energy Branch, Huazhong Agriculture University, Wuhan, China China 2014-0775 2014-1223 Wang Yunpu, Fuel Gas From Rice Husk Via Nanchang University, State Key Microwave-assisted Pryolysis: Laboratory of Food Science and Catalysts to Improve Gas Technology, Nanchang 330047, Products China Research on Carbonization Experiment of Korshinsk Peashrub and Analysis on Carbonizing Heat Sun Fengkun, College of Engineering,Shanxi Agricultural University China China 121 Topic (5) No. 113 Poster # 45-001 Paper # 2014-0045 Combustion and emissions Paper Titles Name & Institution Country Analysis of the Environmental Effects of the Burning of the Straw for Energy Purposes Macak Miroslav, Department of Machines and Production Systems, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra, Slovakia Slovakia China China 114 45-002 2014-0770 Design and Application of High Efficiency Low Tar Biomass Gasifier Wang Yunpu, Nanchang University, State Key Laboratory of Food Science and Technology, Nanchang 330047, China 115 45-003 2014-1246 Straw Mixed Combustion Characteristics and Kinetic Analysis Hou Shulin, College of Engineer,China Agricultural University Topic (6) The solar wind geothermal energy and etc. No. Poster # Paper # Paper Titles Name & Institution Country Hannah Licharz, Institute of Agricultural Engineering, University of Bonn Germany 116 46-001 2014-0147 Using Ground Water Heat Pumps to Heat Rearing Barns 117 46-002 2014-0985 Distributed solar photovoltaic (pv) grid power generation system Zhang Chuanyang, Shandong Agricultural University Taian China 2014-1068 Dynamic Model Of Solar Phovotolatic Systems Enkhbayar Gonchigdorj, Irkutsk State Academy of Agriculture Department of Physics and Electrical Mongolia 2014-1264 Technical Status and Development of the Small Wind Power System in China Zhai Qingzhi, College of Information and Electrical Engineering,China Agricultural University China 2014-1272 Status Monitoring of Wind Power Generation System Based on DC Bus Chen Long, College of Information and Electrical Engineering, China Agricultural University China Thermal analysis of new designed solar air heaters for drying purposes Nuri Caglayan, Department of Farm Machinery, Faculty of Agricultural Engineering, Akdeniz University Turkey 118 119 120 121 122 46-003 46-004 46-005 46-006 2014-1307 122 123 124 46-007 46-008 46-009 2014-1321 The Design of Automatic Monitoring and Controling System Liu Xiaoli, Department of Cartography and Geography Information System,China Agricultural University China 2014-1369 Adjustable Switch Control Circuit for Piezoelectric Generation Du Songhuai, College of Information and Electrical Engineering, China Agricultural University China 2014-1448 Research of MPPT Control Based on LS-SVM Cai Jihe, School of Electrical and Electrical Engineering, Changzhou Institute of Technology China Research on Control Strategy for Direct Drive Wind Power System Tang Wei, College of Information and Electrical Engineering , China Agricultural University China 125 46-010 2014-1490 126 46-011 2014-0365 Shen Dechang, THE QUIK DEVELOPMENT Chinese wind energy equipment OF CHINESE WIND FARMS association Topic (7) No. 127 128 129 Poster # 47-001 47-002 47-003 Paper # China Others Paper Titles Name & Institution Country 2014-0101 Animal Behavior in A Fully Automatically Controlled Dairy Farm Anja Graeff, Technische Universitt München, Center of Life and Food Sciences, Agricultural Systems Engineering, Am Staudengarten2, D-85354 Freising-Weihenstephan, Germany Germany 2014-1301 Study on Total Factor Energy Efficiency Based on DEA of Agricultural Machinery Industry He Qiong, College of engineering, China Agricultural University China 2014-1570 Preparation and Characterization of Cotton Stalk-plastic Film Composites Xia Nan, College of Food Science and Engineering, Northwest A&F University China 123 THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION V MANAGEMENT, ERGONOMICS AND SYSTEMS ENGINEERING 124 Overview of Session V: Development Strategy, Ergonomics and System Management Monday, Sept. 15 Tuesday, Sept. 16 08:00-20:00 Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:30-09:30 Opening Ceremony Location:Plenary Hall B, CNCC 09:30-09:40 Tea Break 09:40-12:10 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC 12:10-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 301A+B,CNCC 15:00-15:15 Tea Break 15:15-17:40 Keynote Speeches Location: 301A+B,CNCC 19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC 08:30-10:00 Technical Oral Presentation 2. Safety and Ergonomics; Agriculture and Agricultural Mechanization Technical and Economic Analysis Location: 403,CNCC 10:00-10:15 10:15-11:45 Technical Oral Presentation 12:00-13:30 Wednesday, Sept. 17 13:30-15:00 Technical Oral Presentation 15:00-15:15 15:15-17:00 Technical Oral Presentation 19:30-21:30 1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Location: 301A+B,CNCC Tea Break 3. Full Mechanization of Field Crop Production Patterns and Approaches Location: 403,CNCC 1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Location: 301A+B,CNCC Lunch Location:Plenary Hall A, CNCC 4. Agriculture and Agricultural Mechanization Technical and Economic Analysis; Logistics Design and Management; Development Strategy and Mechanism Innovation Location: 403,CNCC 1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Location: 301A+B,CNCC Tea Break 5. Agricultural Engineering Education and Extension Training; Agricultural Systems Engineering and Management Location: 403,CNCC 1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Location: 301A+B,CNCC Chinese Cultural Night Location:Beijing Performance & Arts Centre 125 08:30-10:00 Technical Oral Presentation 10:00-10:15 10:15-12:00 Technical Oral Presentation 12:00-13:30 Thursday, Sept. 18 13:30-15:00 Technical Oral Presentation 15:00-15:15 15:15-15:30 Technical Oral Presentation Friday, Sept. 19 126 1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Location: 301A+B,CNCC Tea Break 1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Location: 301A+B,CNCC Lunch Location:Plenary Hall A, CNCC 1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Location: 301A+B,CNCC Tea Break 1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) Location: 301A+B,CNCC 16:00-17:00 Closing Ceremony Location:309A+B, CNCC 19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC 08:00-15:00 Technical Tours OPENING CEREMONY OF SESSION V DEVELOPMENT STRATEGY, ERGONOMICS AND SYSTEM MANAGEMENT 18TH WORLD CONGRESS OF CIGR ORAL PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-17:40 Location: Room 301A-301B, the 3rd Floor of CNCC Chair: Prof. Minli Yang, China Research Center of Agricultural Mechanization Development, China Agricultural University, China Opening Speeches 13:30-13:35 Dr. Claus Grøn Sørensen Chair of Section V: System Management of CIGR; Department of Engineering, Faculty of Science and Technology, University of Aarhus, Denmark 13:35-13:40 Mr. Min Liu Director of China Agricultural Machinery Testing Center, MOA, China 13:40-13:45 Dr. Ravi Ratnayake, Director, Trade and Investment Division, United Nations Economic and Social Commission for Asia and the Pacific (UNESCAP) Technical Presentation 1. Keynote presentations Location: Room 301A-301B, the 3rd Floor of CNCC Chair: Dr. Elisabeth Quendler, University of Natural Resources and Life Sciences, Austria Time 13:45-14:10 14:10-14:35 Paper # Technical Presentations 0826-501 Agricultural mechanization/engineering and food security Prof. Bill A. Stout Honorary President of CIGR, USA 0826-502 The development of agricultural operations management Dr. Claus Grøn Sørensen Department of Engineering, Faculty of Science and Technology, University of Aarhus, Denmark 127 14:35-15:00 0826-503 Agricultural mechanization strategies for sustainable production intensification – concepts and cases from Africa and Asia Dr. Josef Kienzle Agro-Industry Officer, Infrastructure and Engineering Services Unit, Rural Infrastructure and Agro-Industries Division, FAO 15:00-15:15 Tea Break Location: Chairs: Room 301A-301B, the 3rd Floor of CNCC Prof. Ladislav Nozdrovicky, Professor of Slovak University of Agriculture in Nitra, Slovakia. Prof. Jin Tong, Professor of College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China Time Paper # Technical Presentations 0826-504 Agro-value chain analysis and development Dr. Namal Samarakoon Industrial Development Officer, Agri-Business Development Branch, UNIDO Headquarters 15:35-15:55 0826-505 Locally relevant and globally preeminent agricultural and biological engineering Prof. K.C. Ting Head of Department of Agricultural and Biological Engineering, University of Illinois at Urbana-Champaign, USA 15:55-16:15 0826-506 The Role of International Standards in Enhancing Safety in Agriculture Dr. Michael Ryan, Head of the OECD Codes & Schemes 0826-507 Testing networks’ role in improving the ergonomics, safety and qualitywhole system management of farm machines Mr. Sandro Liberatori Director General, ENAMA/ENTAM, Rome, Italy 0826-508 India’s new sub-mission on agricultural mechanization Prof. Minli Yang China Research Center for Agricultural Mechanization Development, China Agricultural University, China 0826-510 Prospect for regional cooperation in sustainable agricultural mechanization Mr. Bing Zhao Head of United Nations Centre for Sustainable Agricultural Mechanization (UNCSAM) 15:15-15:35 16:15-16:35 16:35-16:55 16:55-17:15 17:15-17:30 128 Summary SEPTEMBER 17, 2014 WEDNESDAY MORNING 08:30-12:00 2. Safety and Ergonomics; Agriculture and Agricultural Mechanization Technical and Economic Analysis Location: Chair: Room 403, the 3rd Floor of CNCC Prof. Yinsheng Yang, Professor of College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China Time 08:30-08:45 08:45-09:00 09:00-09:15 09:15-09:30 09:30-09:45 09:45-10:00 Paper # Technical Presentations 2014-0216 Accident at work with fertilizer spreaders in Austrian agriculture Prof. Elisabeth Quendler University of Natural Resources and Life, Austria 2014-0836 Cognitive ergonomics of agricultural vehicles: mental workload assessment in multiple information presentation environment Xiaoping Jin China Agricultural University, China 2014-1252 Analysis of the dynamic characteristic of a transmission gear with high contact ratio Changran He Beijing Information Science and Technology University, China 2014-0051 Evaluation of greenhouse microclimate performance under arid conditions utilizing wireless sensor networks Prof. Moustafa Fadel Department of Aridland Agriculture, College of Food and Agriculture, United Arab Emirates University, UAE 2014-1408 The parametric design of agricultural machinery cab modeling based on the analysis of ergonomics data Sha Liu China Agricultural University, China 2014-1425 Causal influence of farm machinery purchase policy to food production Prof. Changfeng Jiao China Agricultural University, China 10:00-10:15 Tea Break 129 3. Full Mechanization of Field Crop Production Patterns and Approaches Location: Room 403, the 3rd Floor of CNCC Chair: Prof. Marcelo Dodson, Professor of Argosy University, Brazil Time Paper # Technical Presentations 10:15-10:30 2014-0490 Study on the comprehensive evaluation of corn planting patterns in the central area of Jilin province based on the household investigation Wei Lin China Agricultural University, China 10:30-10:45 2014-0785 A model for carbon footprint of agriculture mechanization: LCA case study of maize production in northeast China HainaWang, Jilin University, China 2014-0109 The evaluated rice mechanization in the selected area of Thailand: Nakronrachasima province Dr. Phakwipha Sutthiwaree China Agricultural University, China 2014-1628 Agricultural mechanization production systems and case analysis based on combination of machinery and agronomy Yuxiang Huang Northwest A & F University, China 2014-0833 The contribution of irrigation and other factors to grain yield growth in China between 1978 and 2011 Yong Wu China Agricultural University, China 10:45-11:00 11:00-11:15 11:15-11:30 11:30-12:00 Free speech SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 13:30-16:30 4. Agriculture and Agricultural Mechanization Technical and Economic Analysis; Logistics Design and Management; Development Strategy and Mechanism Innovation Location: Chair: Room 403, the 3rd Floor of CNCC Prof. Changfeng Jiao, Professor of College of Economics and Management, China Agricultural University, China 130 Time Paper # Technical Presentations 13:30-13:45 2014-1472 Earned value management: the soybean harvesting case study Prof. Marcelo Dodson College of Business Administration, Argosy University, Brazil 13:45-14:00 2014-1461 On cost issues of freshwater live fish circulation in China Prof. Xiaohong Lee China Agricultural University, China 14:00-14:15 2014-1616 Study on evolution mechanism of pig-breeding industry chain in China Wenhai Wang China Agricultural University, China 2014-0203 Simulation of Agricultural Logistic Processes with K-Nearest Neighbors Algorithm Prof. Heinz Bernhardt Ruhr-Universität Bochum, Germany 2014-0110 Agricultural mechanization policy of Thailand and China focus on rice production Phakwipha Sutthiwaree China Agricultural University, China 14:15-14:30 14:30-14:45 14:15-15:00 Free speech 15:00-15:15 Tea Break 5. Agricultural Engineering Education and Extension Training; Agricultural Systems Engineering and Management Location: Room 403, the 3rd Floor of CNCC Chairs: Prof. Ladislav Nozdrovicky, Professor of Slovak University of Agriculture in Nitra, Slovakia Time Paper # Technical Presentations 15:15-15:30 2014-0413 Personnel training: the comparison of modes and implications for agricultural engineering discipline in China Lijuan Shi China Agricultural University, China 15:30-15:45 2014-0868 The design of two-axis attitude control system Chao Ma China Agricultural University, China 0618-043 Field trials effectiveness analysis of rice factory seeding technology Lina Zhang China Agricultural University, China 15:45-16:00 16:00-16:30 Free speech 131 1ST ANNUAL MEETING OF THE ASIAN AND PACIFIC NETWORK FOR TESTING OF AGRICULTURAL MACHINERY (ANTAM) SEPTEMBER 17, 2014 WEDNESDAY 09:00-18:00 Room 301A+B, the 3rd Floor of CNCC Opening of the 1st Annual Meeting of ANTAM Mr. Bing Zhao, Head of United Nations Centre for Sustainable Agricultural Mechanization (UNCSAM) Welcoming remarks by Mr. Min Liu, Director of China Agricultural Machinery Testing Centre (CAMTC) Opening remarks by Dr. Ravi Ratnayake, Director of Trade and Investment Division,ESCAP Keynote speeches Representative of the Ministry of Agriculture of China Ms. Rani Kumudini, Joint Secretary, Indian Ministry of Agriculture (TBC) 10:00-10:30 Tea Break (Group Photo) 10:30-10:45 10:45-12:00 Agenda Item 1 Election of Chair and adoption of agenda Agenda Item 2 Country reviews (Countries by alphabetical order, 10 mins for each country review) 12:00-13:30 Lunch Break 13:30-15:30 Agenda Item 3 Country reviews Joint presentation by consultants of CSAM on testing of agricultural machinery and agricultural mechanization in the Asia-Pacific (20 mins) 15:30-15:45 Tea Break 15:45-16:45 Agenda Item 4 Recap on ANTAM by CSAM Operational structure of ANTAM Agenda Item 4.1: Review of the ToR Agenda Item 4.2: Functions and responsibilities of the Lead Testing Stations/Focal Points Location: 09:00-09:30 Chairs: 09:30-10:00 132 Agenda Item 4.3: Functions and composition of the Technical Working Group (TWG) Agenda Item 4.4: Financial and administrative issues 16:45-17:00 17:00-18:00 Agenda Item 5 Election of Chair, Vice Chair and Lead Focal Station/Focal Point for 2014-2015 Agenda Item 6 Work plan of ANTAM for 2014-15 1ST ANNUAL MEETING OF THE ASIAN AND PACIFIC NETWORK FOR TESTING OF AGRICULTURAL MACHINERY (ANTAM) SEPTEMBER 18, 2014 THURSDAY 09:00-17:30 Location: 09:00-10:30 Room 301A+B, the 3rd Floor of CNCC Agenda Item 7 Relationship/partnership with major stakeholders Presentations by OECD, FAO, UNIDO and ENTAM Modalities of partnership/collaboration 10:30-10:45 Tea Break 10:45-11:45 11:45-12:00 Agenda Item 8 Proposal for consideration: simplified testing methodology for knapsack sprayers Wrap-up and closing 15:30-15:45 Tea Break 13:30-15:30 15:30 17:30 Continued discussion and closing Technical tour to China Agricultural University Dinner hosted by CAMTC 1ST ANNUAL MEETING OF THE ASIAN AND PACIFIC NETWORK FOR TESTING OF AGRICULTURAL MACHINERY (ANTAM) SEPTEMBER 19, 2014 FRIDAY 09:00 TECHNICAL TOUR TO CAMTC 133 SESSION V POSTER SESSIONS SEPTEMBER 16, WEDNESDAY 13:30 - 17:00 Topic (4) No. 130 131 132 133 134 135 136 134 Agriculture and agricultural mechanization technical and economic analysis Poster # 54-001 54-002 54-003 54-004 54-005 54-006 54-007 Paper # Paper Titles Name & Institution Country 2014-0144 Digital Information System to Support Area of Agricultural Machines Ricardo de arvalho Instituto Federal Sul Rio Grandense 2014-0481 Research on the Influence of Montanic Fragmental Farmland on the Work Efficiency of Walking Transplanter Chen Cong Nanjing Research Institute for Agricultural Ministry of Agriculture China 2014-0634 An Extended TPB Model in Consumers’ Intention to Purchase Agricultural Machinery: An Empirical Study Lv Feng Jilin University China 2014-0656 Application Prospect of Beidou Navigation Satellite System to Monitor the Pollution of Agriculture Soils with Heavy Metals Guo Hongpeng Jilin University China 2014-0767 Development of Wireless Remote Control System for Greenhouse Ventilation Liu Wei College of Engineering, Electromechanical Branch, China Agricultural University, Beijing, China China 2014-0835 Research on Remote Wireless Control System of The Opening Degree of Thermal Blanket on Greenhouse Base on Wi-Fi Cheng Zhihua Department of Mechatronic Engineering, China Agricultural University China 2014-0872 A Model Construction Method of Large Combine Harvester Chassis Frame Flatness Wu Zhidan College of Engineering, Electromechanical Branch, China Agricultural University China 137 138 54-008 54-009 2014-1101 Study on Evaluation System of Agricultural Construction Project in China Liu Yang Chinese Academy of Agricultural Engineering China 2014-1216 Evaluation of the Technical and Economical Effects of the Using of Machinery System for Processing of Straw for Energy Purposes Nozdrovicky Ladislav Department of Machines and Production Systems, Faculty of Engineering, Slovak University of Agriculture in Nitra Slovakia POSTER SESSIONS SEPTEMBER 17, WEDNESDAY 08:30 —— 12:00 Topic (4) No. 118 119 120 121 Agriculture and agricultural mechanization technical and economic analysis Poster # Paper # Paper Titles Name & Institution Country 51-001 0618-068 Review on Research of Urban Low-carbon Transport Development Strategy Chen Yuexia School of Automobile and Traffic Engineering, Jiangsu University, Zhenjiang 212013 China 51-002 Research Status and Suggestions on Engineering Mode of Major 2014-0396 Food Crops Mechanized Production in China Huang Guangqun China Agricultural University China Li Zhaodong Huazhong Agriculture University China Li Jiyue Institute of Agricultural engineering standards & norms, Chinese Academy of Agricultural Engineering China 51-003 2014-0494 51-004 Construction of Agricultural 2014-0987 Standardization Development Paths Based on Systems Science Topic (3) No. 122 The Production Mode Transformation Ways and Countermeasure Research of China Rape Poster # 53-001 Paper # Detection and safe agricultural production Paper Title Name & Institution Wang Hongli Study on Behavior of PigCollege of Biological and 2014-1475 Breeding Farmers in Controlling Agricultural Engineering, Jilin Pig Quality and Safety University Country China 135 Topic (5) No. 123 124 125 126 No. 127 Poster # 55-001 55-002 55-003 55-004 Poster # 56-001 Paper # Logistics Design and Management Paper Titles Name & Institution Country 2014-0368 Status Analysis of Chinese Famous-region Herbal Medicine . Zhao Zusongying Planting Base and Building College of Engineering, of Materialized and Closed China Agricultural Management Mode——An University, Beijing, China; Empirical Analysis Based on Infinitus (China) Co., Ltd. Supplier China 2014-1117 The Applicable Engineering Modes for The Small Wholesale Market of Melons and Vegetables in Hainan Production Base Sun Jing Institute of Agro-Products Processing Engineering, Chinese academy of Agricultural Engineering China 2014-1437 Research on Total Quality Management System in Heilongjiang Agricultural Autumn Soil Preparation Project Li Guolin Heilongjiang Institute of Agricultural Mechanical Engineering Science China 2014-1509 A Cooperative Game Analysis of Member Interests in The Agricultural Supply Chain by Farmer Cooperatives Association Participated Li Chong College of Biological and Agricultural Engineering, Jilin University China Topic (3) Detection and safe agricultural production Paper # Paper Title Name & Institution Country 2014-1503 Zeng De-chao and China’s Agricultural Engineering Education Feng Min The Institute of Agricultural History, China Agricultural University China POSTER SESSIONS SEPTEMBER 17, WEDNESDAY 13:30 - 17:00 Topic (2) No. Poster # Full mechanization of field crop production patterns and approaches Paper # Paper Titles Name & Institution 110 52-001 0618-042 Comparative Study on the LandDou Bingzheng scale Management Pattern Based College of engineering, China on Game Theory in Yushu Agricultural University 111 52-002 0618-044 Study on Efficiency of WheatCao Weihua rice Double Cropping Mechanical College of Engineering, Production Pattern in Jiangsu Province China Agricultural University 136 Country China China 112 113 114 52-003 52-004 52-005 0618-045 Spatial Distribution Optimization Yang Minli Study of the Engineering Pattern College of Engineering, of Paddy Rice Mechanized China Agricultural University, Production in Southern Double Beijing, China Rice Cropping Region in China China 0618-046 Study on the Effecting Factors Yang Minli of Agricultural Machinery and College of Engineering, China Equipment of Paddy Mechanized Agricultural University Production in Liyang China 0618-047 Study on the Model of Employing Yang Minli Service Through Bidding College of engineering, China in Agricultural Machinery Agricultural University, Operation----Taking BoXin Beijing, China Company as a Case China Liu Haochun Key laboratory of Key Technology on Agricultural Machine and Equipment (South China Agricultural University), Ministry of Education China 115 52-006 2014-0826 The Investigation and Analysis of Sugarcane Mechanization Harvesting in Zhanjiang State Farm 116 52-007 2014-0848 Extensible Evaluation Model for The Selection of Ridging Machinery Zhang Weipeng College of Engineering, China Agricultural University China 2014-0980 Study on the Development of the Technology Extension System of Agricultural Mechanization in China Li Anning Center for Agriculture Mechanization Technology Development & Extension China 52-009 2014-0984 Study of Agricultural Mechanization Technology Extension in Chongqing City Based on the SWOT Theory Ao Fangyuan Chongqing agricultural mechanization technology extension station China 52-010 Situation, Problems and Countermeasures of Vegetable Tang Jin Traceability System in China: A College of Biological and 2014-1155 Survey of Vegetable Production Agricultural Engineering, Jilin Base and Processing Enterprises University in Beijing and Shandong Province 117 118 119 120 121 122 52-008 52-011 2014-1538 Wei Qiao College of Engineering, China Agricultural University China 52-012 Qin Weihua Design of the full hydraulic College of Mechanical and 2014-1429 driving high frame field operation Electrical Engineering, Henan vehicle Agricultural University China Qin Weihua College of Mechanical and Electrical Engineering, Henan Agricultural University China 52-013 2014-1361 Analysis of Sugarcane Mechanized Harvesting Environment System China Design of full hydraulic driving field elevated operating machine 137 THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION VI POSTHARVEST TECHNOLOGY AND PROCESS ENGINEERING 138 Overview of Session VI: Postharvest Technology and Process Engineering Monday, Sept. 15 Tuesday, Sept. 16 08:00-20:00 Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:30-09:30 Opening Ceremony Location:Plenary Hall B, CNCC 09:30-09:40 Tea Break 09:40-12:10 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC 12:10-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 310,CNCC 15:00-15:15 Tea Break 15:15-17:45 Session Opening Ceremony & Keynote Speeches Location: 310,CNCC 19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC 08:30-10:00 Technical Oral Presentation Special Session Research and Development of Plant Resources Location: 402A,CNCC 10:00-10:15 Tea Break 10:15-12:15 Technical Oral Presentation Special Session Research and Development of Plant Resources Location: 402A,CNCC 12:15-13:30 Wednesday, Sept. 17 1. Advanced Food Processing Technologies Location: 401,CNCC 13:30-15:00 Technical Oral Presentation 1. Advanced Food Processing Technologies Location: 401,CNCC 19:30-21:30 4. Drying & Bioprocessing Technology Location: 402B,CNCC Lunch Location: Plenary Hall A, CNCC 2. Postharvest Handling and Management Location: 401,CNCC 15:00-15:15 15:15-17:00 Technical Oral Presentation 4. Drying & Bioprocessing Technology Location: 402B,CNCC 3. Functional Foods Processing Technology and Evaluation Location: 402A,CNCC Executive Board Meeting of Packaging and Food Engineering Branch of Chinese Mechanical Engineering Society (CMES) Location: 402B,CNCC Tea Break 2. Postharvest Handling and Management Location: 401,CNCC 3. Functional Foods Processing Technology and Evaluation Location: 402A,CNCC Executive Board Meeting of Packaging and Food Engineering Branch of Chinese Mechanical Engineering Society (CMES) Location: 402B,CNCC Chinese Cultural Night Location:Beijing Performance & Arts Centre 139 08:30-10:00 Technical Oral Presentation 5. Nondestructive Measurements & Biosensors Location: 401,CNCC 10:00-10:15 10:15-12:30 Technical Oral Presentation Tea Break 5. Nondestructive Measurements & Biosensors Location: 401,CNCC 13:30-15:00 Technical Oral Presentation 6. Imaging and Image Processing Location: 401,CNCC 15:00-15:15 15:15-16:00 Technical Oral Presentation Friday, Sept. 19 140 7. Quality Measurement, 10. Packaging and Storage Modeling and Control(1) Technology Location: 402A,CNCC Location: 402B,CNCC Lunch Location:Plenary Hall A, CNCC 12:30-13:30 Thursday, Sept. 18 7. Quality Measurement, 9. Quality Measurement, Modeling and Control(1) Modeling and Control(3) Location: 402A,CNCC Location: 402B,CNCC 8. Quality Measurement, Modeling and Control(2) Location: 402A,CNCC Tea Break 6. Imaging and Image Processing Location: 401,CNCC 8. Quality Measurement, Modeling and Control(2) Location: 402A,CNCC 16:00-17:00 Closing Ceremony Location:309A+B, CNCC 19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC 08:00-15:00 Technical Tours OPENING CEREMONY OF SESSION VI POSTHARVEST TECHNOLOGY AND PROCESS ENGINEERING SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-14:00 Location: Room 310, the 3rd Floor of CNCC Chair: Prof. Jerzy Weres, Professor of Poznan University of Life Sciences, Poland 13:30-13:35 Prof. Da-Wen SUN the Honorary Chair of Technical Section VI, CIGR, the President of CIGR 13:35-13:45 Address by Prof. LI Shujun, the Vice Chair of Technical Section VI, CIGR 13:45-13:55 Address by Dr. Amauri Rosenthal, EMBRAPA Food Technology Rio de Janeiro, Secretary of Technical Section VI, CIGR 13:55-14:00 Close of the Opening Ceremony PLENARY KEYNOTE PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 14:00-17:15 Room: Room 310, the 3rd floor of CNCC Chairs: Prof. Mingyong Xie, Vice President and professor of Nanchang University, China Prof. Prof. Jose M. Aguilera, Former President of CONICYT, Chile Time Paper # Technical Presentations 14:00-14:30 0826-601 Recent developments in hyperspectral imaging for quality and safety evaluation of agricultural and food products Prof. Da-Wen SUN CIGR President, Member of Royal Irish Academy, Member of Academia Europaea, Ireland 14:30-15:00 0826-602 Science and technology for food innovation Prof. Jose M. Aguilera Former President of CONICYT, Chile 141 15:00-15:15 Tea Break Time Paper # Technical Presentations 0826-603 Applications of radio frequency heating for postharvest pest control in agricultural products Prof. Shaojin Wang Professor of Northwest A&F University, China 0512-003 The latest functional developments and applications of bio-based materials to food packaging in Japan Prof. Toshinori Kimura Former Secretary General of CIGR, Professor Emeritus of Hokkaido University, Japan 16:15-16:45 0826-605 Nondestructive detection technology and equipment for meat quality and safety Prof. Yankun Peng Professor of China Agricultural University, China 16:45-17:15 0826-607 Study on the structure and bioactivity of polysaccharides from food resources Prof. Mingyong Xie Vice President and professor of Nanchang University, China 15:15-15:45 15:45-16:15 SEPTEMBER 17, 2014 WEDNESDAY MORNING ORAL PRESENTATIONS 08:30-12:15 1. Advanced Food Processing Technologies Time: 08:30-10:00 Location: Room 401, the 4th floor of CNCC Moderators: Prof. Yankun Peng, Professor of China Agricultural University Prof. Can Ertekin, Head of Department of Agricultural Machinery, Akdeniz University, TURKEY Time 08:30-08:45 08:45-09:00 142 Paper # Technical Presentations 2014-1424 Optimization of lentinan extraction from Lentinusedodes stems with ultra high pressure by quadratic rotation-orthogonal composite experimental design Jirui Du College of Biosystems Engineering and Food Science, Zhejiang University, China 0509-035 Design and development of biomechatronic products Shujun Zhang University of Gloucestershire, UK 2014-1273 Simulation and experiment of the motion characters in twin-screw extruder based on Solidworks Lixue Zhu Zhongkai University of Agriculture and Engineering, China 2014-0355 Enhancement of biogas production from greenhouse wastes by pretreatment and co-digestion Nuriye Altinay Perendeci Department of Environmental Engineering, Engineering Faculty, Akdeniz University, Antalya, Turkey 09:30-09:45 0509-014 Problem and countermeasure discussion of mechanized farming of main double cropping grain crop Jiyuan Liu Shandong Academy of Agricultural Machinery Sciences, China 09:45-10:00 2014-1267 Development a method to manufacture fermented beef jerky Longhao Yu Heilongjiang Bayi Agricultural University, China 09:00-09:15 09:15-09:30 10:00-10:15 Tea Break Time: 10:15-12:15 Location: Room 401, the 4th floor of CNCC Moderators: Prof. Lanfang Zhang, Chinese Academy of Agricultual Mechanizartion Sciences (CAAMS), China Prof. LAL.Kushwaha, University of Saskatchewan, Canada Time 10:15-10:30 10:30-10:45 10:45-11:00 11:00-11:15 Paper # Technical Presentations 2014-0741 Design and realization of a flow balance control system for buckwheat hulling process Shaozhong Lv College of Mechanical and Electrical Engineering, China 2014-0670 The effect of a photoperiodic green light program during incubation on embryo development and hatch process Qin Tong Royal Veterinary College, UK 2014-1238 Synergistic effect of pulsed electric field and ultrasound on sterilization of yellow rice wine Chenang Lv College of Biosystems Engineering and Food Science, Zhejiang University, China 2014-1619 Control special mechanical energy output by adjusting screw configuration during soybean protein extrusion texturization Yingquan Zhang Institute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences(CAAS), China 143 11:15-11:30 0508-007 Elimination of certain foodborne pathogens in peach juice by the combination of ultra sonication and eau de rose Şeyma Aydın AbantIzzet BAYSAL University, Turkey 11:30-11:45 2014-0178 Safety evaluation of cadmium and its effects on lipid metabolism Yanle Yu Zhejiang Gongshang University, China 2014-0254 The influence of environmental electromagnetic field on electric parameter selection of fruit and vegetable preprocessed by high-voltage pulsed electric field Feiyu Ma Engineering College of Shanxi Agricultural University, China 0618-036 Design and experiment of SBJ20 automatic potato cake molding machine Jiangtao He Chinese Academy of Agricultural Mechanization Sciences, China 11:45-12:00 12:00-12:15 SPECIAL SESSION RESEARCH AND DEVELOPMENT OF PLANT RESOURCES Time: 08:30-11:45 Location: Room 402A, the 4th floor of CNCC Moderator: Prof. Mark L. Wahlqvist, Fuli Institute of Food Science, Zhejiang University, China Time 08:30-09:00 09:00-09:30 09:30-10:00 Paper # Technical Presentations 0526-032 Development of innovative nano (micro)-encapsulation process for health-promoting components in functional foods Prof. John Shi Guelph Food Research Center , Agriculture and Agri‐Food Canada, Canada 0826-608 The research and database development for Chinese features resources phytochemicals Prof. Donghong Liu Executive Director of Fuli Institute of Food Science, Zhejiang University, China 0526-031 Development of plant resources: hydrolysis of cassava into glucose sweetener Prof. Arthur A. Teixeira Fuli Institute of Food Science, Zhejiang University, China 10:00-10:15 Tea Break 144 Time Paper # Technical Presentations 0826-609 Functionalities of Chinese traditional fermented soy products Prof. Yongqiang Cheng China Agricultural University, China 2014-0694 The advances and challenges of impingement technology in agricultural products processing-a review Hongwei Xiao China Agricultural University, China 11:00-11:15 2014-0100 Development of a bush mango (IrvingiaGabonensis) nutcracker Akindele Folarin ALONGE Department of Agricultural and Food Engineering Faculty of Engineering, University of Uyo, Nigeria 11:15-11:30 2014-0618 Study on production and technology of potato hash browns Yang Yang Chinese Academy of Agricultural Mechanization Sciences, China 11:30-11:45 2014-1444 Kinetics of peanut protein extracted by AOT reverse micelle Chenxian Yang Henan University of Technology, China 10:15-10:45 10:45-11:00 2. Drying & Bio-processing Technology Time: 08:30-12:30 Location: Room 402B, the 4th floor of CNCC Moderators: Prof. Toshinori Kimura, former Secretary General of CIGR, Professor Emeritus of Hokkaido University, Japan Prof. Yongqiang Cheng, Professor of China Agricultural University, China Time 08:30-08:45 08:45-09:00 09:00-09:15 Paper # Technical Presentations 0508-027 Microwave-vacuum drying characteristics and quality of scallop adductor muscle Guochen Zhang Dalian Ocean University, China 2014-0309 Analysis on the quality of the dehydrated ginger slices dried by hot air and microwave fluidization Weiqiao Lv Chinese Academy of Agricultural Mechanization Sciences, China 2014-0476 Numerical simulation on superheated steam fluidized bed drying at different operating pressures Zhifeng Xiao Jingdezhen Ceramic Institute, China 145 09:15-09:30 09:30-09:45 09:45-10:00 2014-0325 Mathematical modeling and experimental investigation of drying behavior of green peas in an infrared-assisted hot air dryer Dariush Zare Associate Prof., Biosystems Engineering Dept., Shiraz University, Shiraz, Iran 2014-0340 The technology research of wireless real-time monitoring fruit and vegetables’ moisture during freeze-drying Heling Zhang College of Engineering , Shanxi Agricultural University, China 2014-0698 Study of correlations between the dielectric properties measured by coaxial probe technique and drying characteristics of fruits and vegetables Xinhui Wu College of Engineering, Shanxi Agricultural University, China 10:00-10:15 Tea Break Time: 10:15-12:30 Location: Room 402B, the 4th floor of CNCC Moderators: Prof. Umezuruike Linus Opara, Chair of Technical Section VI, CIGR, Distinguished Prof. &DST/NRF South African Research Prof. Yongqiang Cheng, Professor of China Agricultural University, China Time 10:15-10:30 10:30-10:45 10:45-11:00 11:00-11:15 11:15-11:30 146 Paper # Technical Presentations 2014-1323 Simulation and validation of a suitable model for thin layer drying of ginger Rhizomes in an induced draft dryer Abhijit Borah Department of Agricultural Engineering, Assam Agricultural University1, Assam, India 2014-0789 Study of carrot dry-blanching and dehydration using sequential infrared radiation heating and hot air drying Bengang Wu Jiangsu University, China 2014-0319 Optimization, evaluation and quality assessment of drying process of a spherical product in a hot air infrared assisted vibratory bed dryer case study: green pea Dariush Zare Associate Prof of Biosystems Engineering Dept., Shiraz University, Shiraz, Iran 2014-1074 Study on the dry processing parameters and its model for Chinese dried noodle Yimin Wei Institute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China 0509-012 Effect of airflow rate and air temperature of flash dryer with horizontal spinner on drying of okara Joko Nugroho Wahyu Karyadi Gadjah Mada University, Indonesia 11:30-11:45 11:45-12:00 12:00-12:30 2014-1394 The effects of protective carriers on the inactivation kinetics of lactic acid bacteria during convective droplet drying Nan Fu Soochow University, China 2014-1632 Study on electrical properties of soymilk based on AC impedance method Huanlu Song College of Mechanical and Electronic Engineering, Shandong Agricultural University, China 0509-052 Application of 2DCOS-NIR on identifying meat and bone meal Chengxu Lv China Agricultural University, China SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 13:30-17:00 3. Postharvest Handling and Management Time: 13:30-15:00 Location: Room 401, the 4th floor of CNCC Moderator: Prof. Shaojin Wang, Professor of Northwest A&F University, China Time 13:30-13:45 13:45-14:00 14:00-14:15 14:15-14:30 Paper # Technical Presentations 0826-606 Beyond production: Harnessing technological innovations in postharvest science and engineering to realize the African agriculture transformation agenda Prof. Umezuruike Linus Opara Chair of Technical Section VI, CIGR, Distinguished Professor &DST/NRF South African Research, South Africa 2014-1344 Study on storability of plums of different cultivars at low temperature and their evaluation based on principal component analysis Jiao Wang China Agricultural University, China 0508-017 Study on the physicochemical properties of the pork cooked by microwave oven Zhong Han South China University of Technology, China 2014-0276 Changes in the physicochemical properties and microstructures of frozen pork dumpling filler caused by temperature and duration of storage Baohua Kong Northeast Agricultural University, China 147 14:30-14:45 0509-011 Thermal insulation of a flour mill to improve effectiveness of the heat treatment for insect pest control Porto S.M.C University of Catania, Italy 14:45-15:00 2014-0229 Radio frequency treatments for disinfesting chestnuts Shaojin Wang Professor of Northwest A&F University, China 15:00-15:15 Tea Break Time: 15:15-17:00 Location: Room 401, the 4th floor of CNCC Prof. Peter Schulze Lammers, Department of Agricultural Engineering, University Moderators: of Bonn, Germany Prof. Mingyong Xie, Vice President and professor of Nanchang University, China Time Paper # Technical Presentations 15:15-15:30 2014-0230 Design and experiment of rotary banana carpopodium cutting machine Zhengbo Zhu South China Agricultural University, China 2014-1366 Review on morphological defense changes of sub- and ultra-structure of fruit cell against postharvest infections by fungal pathogens and exogenous regulation involved Shuzhi Yuan China Agricultural University, China 15:45-16:00 0618-031 Rapid and non-invasive determination of K value for evaluation of fish freshness by hyperspectral imaging technique Junhu Cheng South China University of Technology, China 16:00-16:15 0514-008 Development of on-line apple bruise detection system Yichich Chiu, National Ilan University, Chinese Taipei 16:15-16:30 2014-1621 A new kind of walnut comprehensive utilization Shuzhen Hu Chinese Academy of Agricultural Mechanization Sciences, China 2014-1257 Effects of vacuum-infiltrating treatment with yeast mannan on maintaining storage quality and suppression of postharvest disease of tomato fruit Fang Xie China Agricultural University, China 2014-1358 The application on the fruit grading of the Kinect system Gaofeng Zhou College of Biosystems Engineering and Food Science, Zhejiang University, China 15:30-15:45 16:30-16:45 16:45-17:00 148 4. Functional Foods Processing Technology and Evaluation Time: 13:30-15:00 Location: Room 402A, the 4th floor of CNCC Moderator: Prof. Haile Ma, Dean of School of Food and Biological Engineering, Jiangsu University, China Time Paper # Technical Presentations 2014-0532 The effect of different strains fermentation on the content of soybean oligosaccharides in Douchi Jin Gan China Agricultural University, China 2014-0733 Ultrasonic enhanced crude intracellular polysaccharide fermentation of Phellinus Igniarius and its antioxidant activities in vitro Henan Zhang Jiangsu University, China 2014-0849 Antioxidant properties of a unique LAB culture isolated from Harbin dry sausage Qian Chen Northeast Agricultural University, China 2014-1215 Multivariate analysis of precooling treatment on fruit quality and reactive oxygen species of apricot fruit Jian Li Beijing Technology and Business University, China 2014-1462 Antibacterial performance of nisin and chitosan nanoparticles and their characterization after incorporation into zein-based edible packaging Yanru Guo Shanghai Ocean University, China 14:45-15:00 2014-1611 The influence of cultivating conditions on the production of mycelium and triterpenoids of Antrodiacinnamomea CCRC 35396 in submerged cultures Weiwei Wang Jiangsu University, China 15:00-15:15 Tea Break 13:30-17:00 Executive Board Meeting of Packaging and Food Engineering 13:30-13:45 13:45-14:00 14:00-14:15 14:15-14:30 14:30-14:45 Branch of Chinese Mechanical Engineering Society (CMES) Location: Room 402B, the 4th floor of CNCC 149 SEPTEMBER 18, 2014 THURSDAY MORNING 08:30-12:30 5. Nondestructive Measurements & Biosensors Time: 08:30-10:00 Location: Room 401, the 4th floor of CNCC Moderators: Dr. Amauri Rosenthal, EMBRAPA Food Technology Rio de Janeiro, Brazil Prof. Yimin Wei, Institute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China Time Paper # Technical Presentations 08:30-08:45 2014-0105 Non-destructive detection of specific spoilage bacteria growth and sensory change on chilled pork surface by Vis/NIR spectroscopy Leilei Zhang China Agricultural University, China 08:45-09:00 0519-007 Sixty egg hairline crack detection system for grading table eggs Kurt C. Lawrence U.S. Department of Agriculture, USA 2014-1005 The research of fresh meat moisture detection method by NIR Jianxu Wang College of Information and Electrical Engineering, China Agricultural University, China 2014-1296 The analysis of glucose in commercially available papaya powder by infrared spectroscopy Hong Liu Hainan Normal University, China 2014-1370 New reference materials and automatic placing method for NIR application in fruit internal quality detection Luyue Zhang Zhejiang University, China 2014-1473 The assessment of the moisture content of walnut based on near-infrared hyperspectral technology Jiyu Peng College of Biosystems Engineering and Food Science, Zhejiang University, China 09:00-09:15 09:15-09:30 09:30-09:45 09:45-10:00 10:00-10:15 Tea Break Time: 10:15-12:30 Location: Room 401, the 4th floor of CNCC 150 Moderators: Prof. Vilas M. Salokhe, President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India Prof. Kang Tu, Prof. of Nanjing Agricultural University, China Time 10:15-10:30 10:30-10:45 10:45-11:00 11:00-11:15 11:15-11:30 11:30-11:45 11:45-12:00 12:00-12:15 12:15-12:30 Paper # Technical Presentations 2014-1483 Characterizing pear tissue with optical absorption and scattering coefficients Dong Hu College of Biosystems Engineering and Food Science, Zhejiang University, China 2014-1505 Distinguish of different kinds of meat using VIS/NIR spectroscopy Hui Guo College of Mechanical and Traffic, Xinjiang Agricultural University, China 0509-054 Rapidly quantitative determination of soluble solids in bottled vinegar based on NIRS and PLS method Shangshan Yan Shanxi Agricultural University, China 2014-0859 Acetylcholinesterase biosensor based on multiwall carbon nanotubesSnO2-chitosan nanocomposite Xia Sun Shangdong University of Technology, China 2014-0893 Electronic nose and GC-MS application for early detection and classication of pathogens in strawberry fruit Kang Tu Nanjing Agricultural University, China 2014-1020 On eggshell cracks detection method based on a magnetostrictive transducer Wei Lu Nanjing Agricultural University, China 2014-1063 Research on multi-channel ultrasonic eggshell thickness measurement system based on wavelet transform modulus maxima Hanchi Zhang China Agricultural University, China 2014-1135 Using independent components analysis combined with genetic algorithm to mine the feature signals of electronic nose in honey nectar detection Polin Shi Sub-Institute of Food and Agriculture, China National Institute of Standardization, Beijing, China 2014-1297 Determination of trace elements in Synsepalumdulcificum leaf by inductively coupled plasma mass spectrometry Hong Liu Hainan Normal University, China 151 6. Quality Measurement, Modeling and Control (1) Time: 08:30-10:00 Location: Room 402A, the 4th floor of CNCC Moderators: Prof. Gajendra Singh, Professor of Indian Agricultural research Institute (IARI), India Prof. Donghong Liu, Executive Director of Fuli Institute of Food Science, Zhejiang University, China Time 08:30-08:45 08:45-09:00 09:00-09:15 09:15-09:30 09:30-09:45 09:45-10:00 Paper # Technical Presentations 2014-0480 Effects of ultrasound treatment on spoilage microorganisms, quality and antioxidant capacity of cherry tomatoes during storage Donghong Liu Fuli Institute of Food Science, Zhejiang University, China 2014-0586 Prediction of the intercellular space volume of citrus by physical measurements Andi Dirpan Department of Biomechanical System, Agriculture Faculty, EHIME University, Ehime, Japan 2014-0719 Comparison of content of phenol, tannin, and polyphenol oxidase in ten varieties banana (Musa L.var AAA) during different ripen stages Fen Liao Institute of Agro-products Processing, Guangxi Academy of Agricultural Sciences, China 2014-1280 Effect of cassava flour substitution in extruded fish feed on its heat pump drying and microscopy Dr. Folasayo Titilola FAYOSE Tshwane University of Technology, Pretoria, South Africa 2014-0127 Pork sarcoplasmic protein hydrolysis and flavor development induced by a unique LAB culture isolated from Harbin dry sausage Qian Chen Northeast Agricultural University, China 2014-1624 Effect of trans-glutaminase and glycerol on the properties of fish skin gelatin films Shuzhan Wang Henan University of Technology, China 10:00-10:15 Tea Break Time: 10:15-12:00 Location: Room 402A, the 4th Floor of CNCC Moderator: Prof. Zhongli Pan, Professor of University of California, Davis, USA 152 Time 10:15-10:30 10:30-10:45 10:45-11:00 11:00-11:15 11:15-11:30 11:30-11:45 11:45-12:00 7. Paper # Technical Presentations 2014-1427 The Effect of modified buckwheat flour on viscosity properties of wheat flour and sensory qualities of noodles Yingquan Zhang Institute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China 2014-1103 Discrimination and prediction of strawberry juice quality based on electronic tongue Shanshan Qiu College of Biosystems Engineering and Food Science, Zhejiang University, China 2014-0838 Mathematical modelling of microwave, combined microwave-convective and convective drying parameters of pumpkin Sevil Karaaslan University of Suleyman Demirel, Faculty of Agriculture, Department of Agricultural Machinery, 32260 Isparta, Turkey 2014-1426 Effects of vacuum mixing, water addition, and mixing time on the quality of fresh Chinese white noodles Rui Liu Institute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China 2014-0820 The Influence of different mechanical treatments on the nutritional value of corn kernels Shifang Wang Shanxi Agricultural University, Taigu County, China 0509-007 Comparison and evaluation of flavor characteristics between wild and pond-reared Chinese mitten crab (Eriocheirsinensis) Shuai Wang Shanghai Ocean University, China 2014-0145 Thermal analysis of comparative study of a new model for greenhouse tobacco drying Ricardo Oliano de Carvalho Federal University of Pelotas, Brazil Quality Measurement, Modeling and Control (2) Time: 08:30-09:30 Location: Room 402B, the 4th floor of CNCC Moderator: Prof. Cristina Ratti, Professor - Food Engineering SGA - FSAA Université Laval Québec, Canada Time Paper # 08:30-08:45 2014-0040 Technical Presentations An appraisal of studies on food extrusion Kehinde A. Adekola Jilin University, China 153 08:45-09:00 09:00-09:15 09:15-09:30 2014-1353 Effects of plant and microbial proteases on the quality of hot-boned beef topsides Aladin Bekhit University of Otago, New Zealand 2014-0866 Modeling study of the temperature relation between the retort and cold spot Jianwei Zhou Zhejiang University, China 2014-1134 Evaluation of natural hog casings modified by surfactant solutions combined with lactic acid by response surface methodology and sausage performance stuffed in modified casing during immersion vacuum cooling Chaohui Feng University College Dublin, Ireland 10:00-10:15 Tea Break 8. Packaging and Storage Technology Time: 10:15-11:30 Location: Room 402B, the 4th floor of CNCC Moderator: Prof. Xiaobo Zou, Prof. of School of Food & Biological Engineering, Jiangsu University, China Time 10:15-10:30 10:30-10:45 10:45-11:00 11:00-11:15 11:15-11:30 154 Paper # Technical Presentations 2014-1031 Analyses on thermal and mechanical properties of the vertical sealing roller in the four column quadrilateral sealing packing machine Prof. Chuanmin Yang Tianjin University of Commerce, China 2014-1609 Renewable cold energy use for brown rice storage and rough rice storage in Japan Shuso Kawamura Hokkaido University, Japan 2014-1229 Effect of different storage temperature on respiration rate and marketable quality of sweet corn Sheng Liu Beijing Vegetable Research Center, Beijing Academy of Agriculture and Forestry Sciences, China 2014-0236 Effect of thermal and storage treatments on walnut paste quality associated with enzyme inactivation Prof. Shaojin Wang Professor of Northwest A&F University, China 2014-1258 Effects of ascorbic acid-combined solution dipping on browning and quality of fresh-cut apple fruit pieces during storage Hanxu Pan China Agricultural University, China SEPTEMBER 18, 2014 THURSDAY AFTERNOON 13:30-16:00 9. Quality Measurement, Modeling and Control (3) Time: 13:30-16:00 Location: Room 402A, the 4th floor of CNCC Moderators: Dr. Peeyush Soni, Asian Institute of Technology, Thailand Prof. Baohua Kong, Northeast Agricultural University, China Time 13:30-13:45 13:45-14:00 14:00-14:15 14:15-14:30 14:30-14:45 14:45-15:00 Paper # Technical Presentations 2014-1487 The study of honey nectar source characterization pattern of based on differences in Aroma characteristic Bolin Shi Sub-Institute of Food and Agriculture, China National Institute of Standardization, China 2014-1530 Analysis and evaluation of Kiwifruit quality Longsheng Fu Northwest A&F University, China 2014-1352 Optimization of cyanogens detoxification of flaxseed meal using a central composite design (CCD) Aladin Bekhit Food Science Department, University of Otago, Dunedin, New Zealand; 2014-1436 Relationships between the thermal properties of raw materials and the textural properties of extruded texturized soybean protein Yingquan Zhang Institute of Agro-Products Processing Science and Technology, Chinese Academy of Agricultural Sciences (CAAS), China 2014-0180 Model-based research for the risk and prediction of silage bale deterioration suffered from aerobic impact Kerstin Helena Jungbluth Institute of Agricultural Engineering, Germany 2014-1479 Effects of glycan parts on the enzymatic coagulation of soybean proteins Guangzhong Luan College of Food Science and Engineering of Northwest A&F University, China 15:00-15:15 Tea Break 155 Time 15:15-15:30 15:30-15:45 15:45-16:00 10. Paper # Technical Presentations 2014-0321 The antioxidant capacity of Maillard reaction products formed by a porcine plasma protein hydrolysate-sugar model system as related to chemical characteristics Qian Liu, Northeast Agricultural University, China Northeast Agricultural University, China 0506-005 Feasibility study on classifying different kinds of Chinese tea using Terahertz spectroscopy Bin Li Beijing Research Center for Information Technology in Agriculture, China 2014-0210 Physical properties of rough, brown and white rice of Japonica, Indica and NERICA types Edenio Olivares Diaz Hokkaido University, Japan Imaging and Image Processing Time: 13:30-16:00 Location: Room 401, the 4th floor of CNCC Moderators: Prof. Bill A. Stout, Honorary President of CIGR, USA Prof. Yankun Peng, Prof. of China Agricultural University, China Time 13:30-13:45 13:45-14:00 14:00-14:15 14:15-14:30 14:30-14:45 156 Paper # Technical Presentations 2014-0550 Mapping of soluble solid content distribution in mulberry using nearinfrared hyperspectral imaging Yanru Zhao College of Biosystems Engineering and Food Science, Zhejiang University, China 2014-0356 Emerging hyperspectral imaging for rapid and real-time monitoring of main spoilage bacteria in farmed salmon fillets Hongju He University College Dublin, Ireland 2014-1451 Quantitative determination of the illegally added pigment green in tea by hyperspectral imaging technology Chanjun Sun Zhejiang University, China 2014-0456 Pixel based color detection technique for agricultural products Abdullah BEYAZ Ankara University, Agriculture Faculty, Department of Agricultural Machinery, 06130 , Aydınlıkevler Ankara. Turkey 2014-1311 Detection and quantification of chicken, horse and pork in minced beef using hyperspectral imaging Mohammed Kamruzzaman University of Tokyo, Japan 14:45-15:00 2014-0050 Influence analysis of region of interest on apple sugar model by hyperspectral imaging Zhiming Guo National Engineering Research Center for Information Technologies in Agriculture, China 15:00-15:15 Tea Break Time 15:15-15:30 15:30-15:45 15:45-16:00 Paper # Technical Presentations 2014-0895 Application of visible and long-wave near infrared hyperspectral imaging for color measurement of grass carp (Ctenopharyngodonidella) Junhu Cheng South China University of Technology, China 2014-0651 Design of open-carton molding device in full-automatic hot melt glue carton sealer Shuxi Tang Chinese Academy of Agricultural mechanization Sciences, China 2014-1112 Research of healthy seedlings recognition technology Jianping Hu Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University, China 157 SESSION VI POSTER SESSIONS SEPTEMBER 18, THURSDAY 08:30 - 12:00 Topic (1) Advanced food processing technologies No. Poster # Paper # Paper Titles Name & Institution Country Han Qinghua Chinese Academy of Agricultural Mechanization Sciences, Beijing, China China 1 61-001 2014-0082 Study on New Processing and Equipment of The Tonic Soup Composite Seasoning 2 61-002 2014-0299 Study on the extraction, purification and antioxidant property of mucus protein from Chinese yam Li Jian Harbin University of Commerce China Cai Zhiyong Chinese Academy of Agricultural Mechanization Sciences China Chen Wei Inner Mongolia Agricultural University China Yao Aolin The Optimization of The Processing College of Biological and Parameter of Resistant Starch From Agricultural Engineering, Maize By Complex of Different Jilin University, Changchun, Enzymatic Methods Jilin , China China 3 61-003 2014-0381 Research and Experiment on a New Technology for Flax Seed Husking 4 61-004 2014-0607 Review of Buckwheat Shelling Equipment 5 6 7 8 158 61-005 61-006 61-007 61-008 2014-0732 2014-0808 The Mechanical Properties of Walnut Impact Breaking Test Chen Lin College of Information and Engineering Technology,Sichuan Agricultural University 2014-0834 Study on Key Processing Technology for Instant Shrimp of Litopenaeus Vannamei Zhang Yongsheng Office of Science of Technology, Agricultural University of Hebei China 2014-0907 The Influence of Expression of Two Transaminase Genes ARO8 and ARO9 on the 2-phenylethanol Transformation in Saccharomyces Cerevisiae Yin Sheng School of Food and Chemical Engineering, Beijing Technology & Business University China China 9 10 61-009 61-010 2014-0909 Enhancement of 2-phenylethanol Yin Sheng Biosynthesis in Saccharomyces School of Food and Chemical Cerevisiae by Co-expression of the Engineering, Beijing Transaminase Genes ARO8 and the Technology & Business Decarboxylase Gene ARO10 University 2014-1242 The Backward Extraction Technology of Soybean Protein by AOT Reverse Micelles Yang Guangsheng College of Food Science and Technology,Henan University of Technology China China Topic (2) Imaging and image processing No. Poster # Paper # Paper Titles Name & Institution Country 11 62-001 2014-0048 Application of Handheld-based Machine Vision Technology in Determining Banana Maturity Liu Yangtai University of Shanghai for Science and Technology China 12 62-002 2014-0176 A Multiple-Threshold Based Image Segmentation Method for Bananas in Crate Hu Menghan University of Shanghai for Science and Technology China 2014-0303 A Method of Nondestructive Detection and Analysis for Walnut Internal Quality Based on X-ray CT Imaging Zhou Xuecheng South China Agricultural University China 2014-0526 Peanuts Image Denoising Method Based on Compressed Sensing Theory Yu Haining Department of Mechanical and Electrical Engineering, Qingdao Agricultural University China 2014-1283 Detection of Moldy Corn Using FTNIR Spectroscopy and Artificial Neural Networks Yuan Ying College of Engineering, China Agriculture University China 2014-1287 Detection of Aspergillusflavus on Wheat Kernels Using FT-NIR and Factorial Discriminant Analysis Zhao Xin College of Engineering, China Agriculture University China 2014-1289 Fungal Detection in Maize Kernels Using FT-NIR Spectroscopy Coupled with SIMCA and PLS-DA Methods Chu Xuan Collage of Engineering, China Agricultural University China Du Jianjun Beijing Research Center for Information Technology in Agriculture, Beijing Academy of Agriculture and Forestry Sciences China Zhou Shuiqin China 13 14 15 16 17 62-003 62-004 62-005 62-006 62-007 18 62-008 2014-1489 Continuous Field Monitoring and Intelligent Computation of Crop Growth based on Digital Image Processing 19 62-009 2014-0646 Bruise Damage Stage Judgement Of Chinese Pear based on Histogram 159 20 62-010 2014-1434 Effects of small amount of sodium Zhou Yun carbonate on konjac glucomannanCollege of Food Science induced changes in starch nanoand Nutritional Engineering, unit chains in gelatinization and China Agricultural retrogradation processes University China Topic (3) Drying & bio-processing technology No. 21 22 23 24 25 26 27 28 29 30 160 Poster # 63-001 63-002 63-003 63-004 63-005 63-006 63-007 63-008 63-009 63-010 Paper # Paper Titles Name & Institution Country 0509-047 Research on Rapid Fermentation Parameters for Processing of Combined Rice Seedling Substrates Tray Made by Agricultural Organic Wastes Zhao Zhongliang Heilongjiang Province Agricultural Mechanical Engineering Research Institute China 0509-051 Design and Experiment on Automatic Grading Machine for Kiwi Zuo Xingjian College of Mechanical and Electronic Engineering, Northwest A&F University China Xue Yameng Study on Controlled Freezing-point Institute of Food Science Drying and Character Analysis of and Engineering, University Carrot of Shanghai for Science and Technology China 0509-059 Study on Microwave-vacuum Drying of Carrot at Low Temperature Xue Yameng Institute of Food Science and Engineering, University of Shanghai for Science and Technology China 2014-0146 Drying Tomatoes in A Low Cost Tray Dryer Ricardo Oliano de Carvalho Agricultural Engineering student; Federal University of Pelotas Brazil 2014-0253 Rice Drying Using Heat Pump Dehumidifying System with Heat Pipe Luo Qiaojun Guangdong Institute of Modern Agricultural Equipment China 2014-0259 Grain Dryer Based on Heat Pump Dehumidifying Luo Qiaojun Guangdong Institute of Modern Agricultural Equipment China 0509-058 2014-0277 Optimization of Hot air-microwave Han Qinghua fluidized drying Conditions of Chinese Academy of Lentinus edodes by Using Response Agricultural Mechanization Surface Methodology Science China 2014-0297 The Research Process of Agricultural Products’ Microwave Drying Technology and Equipment Lv Weiqiao Chinese Academy of Agricultural Mechanization Science China 2014-0499 Heat Pump Drying Technology and Quality Comparison of Pericarpium Citri Reticulatae Gong Li Guangdong Agricultural Machinery Research Institute China 31 32 33 34 35 36 37 38 39 40 41 63-011 63-012 63-013 63-014 63-015 63-016 63-017 63-018 63-019 63-020 63-021 Xue Jing College of Mechanical Engineering, Tianjin University of Science and Technology 2014-0825 Coproduction of Dried White Radish and Juice by Vacuum Drying Method 2014-0827 Effect of Pretreatment by the Zhang Qian Superheated Steam Jet Impingement College of Mechanical and Blanching on Drying Characteristics Electric Engineering Shihezi and Red Pigment of Line Pepper University China China 2014-0889 Influences of drying parameters on drying duration of paddy rice in deep fixed-bed Wang Danyang College of Engineering, Shenyang Agricultural University China 2014-0899 Experimental research on thin layer drying model verification and optimization for paddy rice in a deep fixed-bed dryer Wang Danyang College of Engineering, Shenyang Agricultural University China 2014-0954 prediction of drying indices for paddy rice in a deep fixed-bed based on neural network Wang Danyang College of Engineering, Shenyang Agricultural University China Drying Characteristics of Strawberries in Vacuum Dryer Can Ertekin Department of Farm Machinery, Faculty of Agricultural Engineering, Akdeniz University Turkey 2014-1035 Weibull Distribution for Modeling Drying of Areca Nut Guo Shouzhi College of Mechanical and Electronic Engineering, Shandong Agricultural University China 2014-1072 Drying Characteristics of Green Peas in a Fluidized Bed with Slotted Gas Distributor Li Zhanyong College of Mechanical Engineering, Tianjin University of Science and Technology China 2014-1110 Lou Zheng Institute of Agricultural Air Impingement Drying Shrinkage Product Processing, Chinese Characteristics of Chinese Jujube Academy of Agricultural Engineering 2014-1024 2014-1237 0618-021 China Optimization of Hot-air Drying Technical Parameters of Purple Sweet Potato Lv Xiaorong College of Information & Engineering Technology, Sichuan Agricultural University China Mass transfer simulation of sigillate walnut (Juglans sigillata Dode) during convection drying Yang Wei Faculty of Modern Agriculture Engineering, Kunming University of Science and Technology China 161 42 43 63-022 63-023 0618-097 Design and Experiment of Horizontal Turntable Air Impingement Dryer Wang Dong College of Engineering, China Agricultural University China 0519-016 Design, Fabrication and Evaluation of an Infrared – Assisted Vibratory Bed Grain Dryer, a Case Study: Paddy Drying Dariush Zare Shiraz University Iran Dariush Zare Shiraz University Iran Dariush Zare Shiraz University Iran 44 63-024 0519-015 Optimization and Evaluation of a Microwave-AssistedFluidized Bed Dryer with Exhaust Air Recirculating System:Case study, Corn Drying 45 63-025 2014-0318 Modeling of Thin Layer Hot AirInfrared Drying of Green Pea Topic (4) Functional foods processing technology and evaluation No. Poster # Paper # Paper Titles Name & Institution Country Zhu Yaodi School of Food and Biological Engineering, Jiangsu University China 46 64-001 0509-037 Investigation of the Solid-state Fermentation of Chinese Traditional Aromatic Vinegar During Summer Hot Season 47 64-002 2014-0301 Functional study of star anise fennel essential oil Liu Ning Harbin University of Commerce China 2014-0806 Extraction and Antioxidant Activity of Polysaccharides from Ganoderma Lucidum Using Acidic Electrolyzed Water Yan Zheng Chinese Academy of Agricultural Engineering China 2014-1141 Influence of Pre-fermentation Cold Maceration Treatment and Cap Management on Biogenic Amines in Cabernet Sauvignon Wines Liu Peitong China Agricultural University China 0618-012 Gan Jing The Isoflavone and Purine Changing College of Food Science of Soymilk During Fermentation by and Nutritional Engineering, Yeast Strains China Agricultural University 48 49 50 64-003 64-004 64-005 China Topic (5) Functional foods processing technology and evaluation No. Poster # Paper # Paper Titles Name & Institution Country 51 65-001 2014-0102 An Offline Portable System Based on Dual-DSP for Nondestructive Detection of Livestock Meat Peng Yankun China Agricultural University China 65-002 Quantitative determination of camellia oil adulterated with 2014-0293 soybean oil by Vis/NIR spectroscopy and chemometrics Tong Sun Jiangxi Agricultural University China 52 162 53 54 55 65-003 65-004 65-005 2014-0410 Near Infrared Rapid Detection of Protein,Fat,Starch and Water in Rice Yang Suxian Huazhong Agricultural University China 2014-0953 Studies Of Quantitative Detection For The Concentration Of Ethanolwater Solution Using Portable Nearinfrared Raman Spectrometer Zou Xiaobo College of Food and Biological Engineering, Jiangsu University China 2014-1170 Compositional Analysis of Fish Feed Using Mid-infrared Spectroscopy and Chemometrics Zhu Fengle College of Biosystems Engineering and Food Science, Zhejiang University China China 56 65-006 2014-1250 Zhao Pengfei Moisture Content Detection of Corn College of Information Ear by Bioelectrical Impedance and Electrical Engineering, Spectroscopy China Agricultural University 57 65-007 2014-1468 An Improvement on Models of Pork Quality Detection based on VIS/ NIR Reflectance Spectroscopy Peng Yankun China Agricultural University China Xu Yang College of Engineering, China Agricultural University China Tao Feifei China Agricultural University China 58 65-008 0618-019 Study of Non-destruction Detection Technology for Free Water Content of Beef 59 65-009 2014-0103 A Potential Technique for Detection of Foodborne Pathogens in Pork Meat Using Raman Spectroscopy Topic (6) Novel agro-processing No. 60 Poster # 66-001 Paper # Paper Titles Name & Institution Country 2014-0023 Effect of Low-temperature Plasma Treatment on Maize (Zea mays Linn.) Seeds Germination and Seedling Shao Changyong College of Engineering, China Agricultural University China Liu Qian Northeast Agricultural University China Ricardo Oliano de Carvalho Agricultural Engineer, Federal University of Pelotas Brazil 2014-0807 Chen Lin Shelled Walnut Shell Gap Extrusion College of Information and Parameter Optimization Agency Engineering Technology,Sichuan Agricultural University China 2014-1185 Hou Junming Castor Seed Mechanical Properties Department of Engineering, for Shelling Machine Shenyang Agricultural University China 61 66-002 2014-0321 The Changes of Emulsify Properties of Soybean Protein Isolate Induced by PH-shifting Combined with Heating Treatment 62 66-003 2014-0726 Biodiesel Production from Bovine Tallow 63 64 66-004 66-005 163 65 66 67 68 69 70 66-006 66-007 66-008 66-009 66-010 66-011 2014-1330 The Design and Parameter Liang Renghao Optimization of Automatic Positioning College of Biosystems Mechanism for Automatic Injection Engineering and Food System of Fry Vaccine Science, Zhejiang University 2014-1404 Synergistic Effect of Thermal and Pulsed Electric Field Treatment on the Permeability of Vesicles - A Cell Membrane Simulation Liu Zhiwei College of Light Industry and Food Sciences, South China University of Technology China 2014-1430 Expression and Characterization of the Aspartokinase from Corynebacterium Pekinense E31 Ren Jun College of Food Science and Engineering, Jilin Agricultural University China 0526-020 Utilisation of Rice Straw for Composite Panel Manufacturing Luo Peng College of Mechanical Engineering, Tianjin University of Commerce China 0618-070 On Ammonia Concentrations in Breeding Environments of Dairy Houses Located in the Iblean Highlands Giovanni Cascone University of Catania, Department of Agri-food and Environmental Systems Management Italy 2014-1345 The Finite Element Simulation and Optimization Design of Biodegradable Seedling Pot Liu Xiangdong Jiamusi University China China Topic (7) Packaging & storage technology No. Poster # Paper # Paper Titles Name & Institution Country 71 67-001 2014-0278 The Influence of Different Storage Conditions on The Dried Quality of Lentinus Edodes Han Qinghu China Agricultural University China 2014-0653 Development and Validation of A Predictive Model to Describe The Effect of Carbon Dioxide on The Growth of Listeria Monocytogenes in Fresh-cut Iceberg Lettuce Packaged under Modified Atmospheres Yin Xiaoting Nanjing Agricultural University China 2014-1033 Preparation , Micro-structure and Mechanical Performance of Soybean-protein Film Yang Chuanmin School of Mechanical Engineering, Tianjin University of Commerce China 2014-1122 Optimization of composite preservative on stewed duck esophagus Xie Manman School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology China 0618-099 Utilization of High Intensity Pulsed Electric Fields (PEF) as an Unconventional Non Thermal Method of Liquid Food Preservation Mohamed Hatem Cairo University Egypt 72 73 74 75 164 67-002 67-003 67-004 67-005 76 77 78 67-006 67-007 67-008 2014-1056 Study of Rheological Behavior of Soy Protein Spray Coating Dispersions for Edible Vegetablebased Composite Paper Hou Honghong School of Mechanical Engineering, Tianjin University of Commerce China 2014-0592 Application of new sterilization technology in the storage and transport of fruits and vegetables preservation Zhang Xinyu College of Engineering, South China Agriculture University, Guangzhou, China China 2014-0662 Using Comsol Multiphysics for the Evaluation of Liquid Food Thermal Steriliza-tion: Effect of Orientation of Cylinder Cans Wang Liang Zhejiang University China Topic (8) Postharvest handling and management No. Poster # Paper # Paper Titles Name & Institution Country Chen Cunkun National Engineering Technology Research Center for Preservation of Agriculture Products China 79 68-001 0519-005 Effect of Chlorine Dioxide on Postharvest Storage Quality of Agaricus Bisporus 80 68-002 2014-0358 On-line nondestructive inspecting sugar content of orange using multispectral imaging Liu Muhua Jiangxi Agricultural University China 2014-0605 Relationship between Hyperspectral Imaging and Physiological and Biochemical Properties during the Postharvest Decay of Strawberry Sun Ye Nanjing Agricultural University China 2014-0645 The design of a device for online weight measuring and grading of freshwater fish Wang Kundian College of Engineering, Huazhong Agriculture University China 2014-0870 Non-destructive Prediction of Hardness of Carrots using Hyperspectral Imaging Ye Xujun Faculty of Agriculture and Life Science, Hirosaki University Japan 81 82 83 84 85 86 68-003 68-004 68-005 68-006 68-007 68-008 2014-0911 Comparison of Effects of Radiation Stella Vieira UV-C on Post-harvest Disinfestation Biological Institute, of Starfruit, Kumquat and Acerola Experimental Center Researcher Infested by Fruit Fly (Diptera: collaborator of School of Tephritidae) Agricultural Engineering 2014-1182 Study of Dynamic Discriminant Models of Huping Jujube Damage Based on Visible/ Near Infrared Spectral Wang Bin College of Engineering, Shanxi Agricultural University 2014-1220 Li Jian Beijing Engineering and Effect of Air Precooling on Quality Technology Research Center of Apricot Fruit of Food Additives, Beijing Technology and Business University Brazil China China 165 87 88 89 68-009 68-010 68-011 0618-098 Using of Safety Environment Essential Oil to Improve Quality and Storage Ability of Grapes Mohamed Hatem Cairo University Egypt 0618-101 Effects of Postharvest Storage Nazneen Barday on Nutritional Quality of New Department of Horticultural Mandarin Cultivars Grown in South Science, Stellenbosch Africa University South Africa 2014-1396 Hu Shuzhen A green physical refining process of Chinese Academy of olive oil with high acid value Agricultural Mechanization Sciences China Topic (9) Quality measurement, modeling and control No. 90 91 92 Poster # 69-001 69-002 69-003 Paper # Paper Titles Name & Institution Country 0508-020 Evaluation Study of a Magnetic Nanoparticle Based Nucleic Acid Isolation and Purification Instrument for DNA Extraction of E. Coli O157: H7 Chen Yahui Ministry of Agriculture, China Agricultural University China 2014-0098 A Detection Method of Melamine Mixed Into Milk Powder Using Raman Scattering Spectroscopy Zhao Juan China Agricultural University China 2014-0274 Thermal Properties of ‘Foie-gras’ Food Products Cristina Ratti Department of Soils Sciences and Agro-Food Engineering, Université Laval Canada Lu Yan Northeast Agricultural University China 93 69-004 2014-0320 The Influence of Physicochemical and Emulsifying Properties Induced by Hydroxyl Radical-stressed Soybean Protein Isolate 94 69-005 2014-0351 Hydrated Chia Seed Effect on Wheat Flour and Bread Technological Quality Ivan Svec Institute of Chemical Technology in Prague Czech Republic 95 69-006 Primary Investigation on Cigarette 2014-0353 Classification Identification Based on Hyperspectral Imaging Wu Qiong Shenyang Agricultural University China 2014-0378 Experimental Study on Friction Characteristics of Caragana Korshinskii Kom Liu Xiao Shanxi Agricultural University China 2014-0389 Experimental Study on the Rheological Properties of Caragana Korshinskii Materials Kong lijuan College of Engineering, agricultural engineering, Shanxi Agricultural University China 2014-0392 Conventional Mechanical Properties of Solid Fuel Briquettes Made from Caragana Korshinskii Kom Cui Ruixiao Shanxi Agricultural University China 96 97 98 166 69-007 69-008 69-009 99 100 101 102 103 104 105 106 107 108 109 2014-0488 Application of Colorimetric Sensor Technology for Monitoring and Distinguishing of Predominant Spoilage Bacteria in Pork Zou Xiaobo Jiangsu university China 2014-0559 Rapid Detection of Escherichia coli on Vegetables based on Pattern Recognition Ding Yun Editorial department of Journal of Bionic Engineering, Jilin University China 2014-0567 The Effect of Abrupt Drops in Temperature on the Growth of Pseudomonas Aeruginosa Single Cells Wang Xin School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology China 2014-0814 Enhancement of The Cleanability of Milk Fouling on Highly Finished Inner Surface of Stainless Steel Tubing Ikko Ihara Department of Agricultural Engineering, Kobe University Japan 2014-0841 Effect of Carboxymethyl Cellulose on Stabilization of Soy Protein Isolate Dispersion at Acid pH Li Xinxin School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology China 69-015 2014-0843 Research on Sterilization Method of Minced Fish Products to Prolong the Shelf-life at Room Temperature Ding Yun Editorial department of Journal of Bionic Engineering, Jilin University China 69-016 Effect of Enzymatic Hydrolysis on 2014-0935 Bioavailability of Corn Gluten Meals in Vivo Jin Jian School of Food and Biological Engineering, Jiangsu University China 69-017 Effect of Microwave Pretreatment on 2014-1086 the Quality of Sesame Oil Ju Yang Food Science and Engineering, Henan University of Technology China 2014-1111 The Information Variation Feature and Discriminant Capabilities of Electronic Nose for Adulterated Honey Shi Bolin School of Life Science, Shanghai University China 2014-1191 Penetration Depth of Nearinfrared Light in Small, Thin-skin Watermelon Qian Man College of Mechanical and Electronic Engineering, Northwest Agricultural and Forestry University China 2014-1309 Study on Application Effects of Octacosanol in the Laying Hens Diets Peng Kai College of Engineering , China Agricultural University China 69-010 69-011 69-012 69-013 69-014 69-018 69-019 69-020 167 110 111 112 Simultaneous Quantitation of Lu Xin Organic Acids and Monosaccharides Institute of Agricultural by High-performance Liquid Processing, Henan Academy Chromatography of Agricultural Sciences China 69-022 2014-1401 He Yifan College of Food Science and Nutritional Engineering, China Agricultural University China 69-023 Wang Xuan Study on the Effects of Hydrocolloids Department of Food Science 2014-1432 on Characteristics of Frozen Dough & Nutrition Engineering, and Quality of Bread China Agricultural University China 69-021 2014-1372 Study on the Effects of Dietary Components on Ferrous Sulfate Absorption by Caco 2 cells 2014-1435 Cloning, Purification, Characterisation and Mutational Analysis of Homoserine Dehydrogenase from Corynebacterium Pekinense Xu Jinkun College of Food Science and Engineering, Jilin Agricultural University China 69-025 2014-1496 Effect of Components of WPC Neutrase Hydrolysates on Iron Uptake by Caco-2 Cells Qian Gao College of Food Science and Nutritional Engineering, China Agricultural University China 115 69-026 Yang Mengyan College of Food Science Evaluation of Nutrients During Fresh 2014-1501 & Nutritional Engineering, Rice Noodle Processing China Agricultural University 116 69-027 2014-1623 A Real-time Detection System of the Pig Backfat Based on the Optical Image Pang Tian China Agricultural University China 2014-1626 Research on Glycosylation and Enzymatic Modification on Soybean Protein Allergies Zhu Tingwei College of Food Science and Technology, Henan University of Technology China 2014-1627 Electrochemical Behavior of Rutin on Graphene and Ionic Liquids Composite Film Modified Electrode Wang Hui Ministry of Agriculture, China Agricultural University China 0618-065 Optimization of Composite Preservative on Stewed Duck Esophagus Xie Manman School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology China 2014-0398 Correlation Study between Biomechanical Properties and Moisture Content of Fruits and Vegetables Feng Huimin Shanxi Agricultural University China 113 114 117 118 119 120 168 69-024 69-028 69-029 69-030 69-031 China THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION VII INFORMATION SYSTEMS 169 Overview of Session VII: Information Systems Monday, Sept. 15 Tuesday, Sept. 16 Wednesday, Sept. 17 08:00-20:00 Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:30-09:30 Opening Ceremony Location:Plenary Hall B, CNCC 09:30-09:40 Tea Break 09:40-12:10 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC 12:10-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 1. Keynote Speeches Location: 309B,CNCC 15:00-15:15 Tea Break 15:15-16:45 1. Keynote Speeches Location: 309B,CNCC 19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC 08:30-10:00 2. Keynote Speeches Location: 309B,CNCC 10:00-10:15 Tea Break 10:15-12:00 2. Keynote Speeches Location: 309B,CNCC 12:00-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 Technical Oral Presentation 3. Agricultural Information Sensing Location: 302B,CNCC 15:00-15:15 15:15-17:00 Technical Oral Presentation 19:30-21:30 170 4. Precision Agriculture and Intelligent Instrument Location: 408,CNCC Tea Break 3. Agricultural Information Sensing Location: 302B,CNCC 4. Precision Agriculture and Intelligent Instrument Location: 408,CNCC Chinese Cultural Night Location:Beijing Performance & Arts Centre 08:30-10:00 Technical Oral Presentation 10:00-10:15 10:15-12:00 Technical Oral Presentation 12:00-13:30 Thursday, Sept. 18 13:30-15:00 Technical Oral Presentation 15:00-15:15 15:15-15:30 Technical Oral Presentation Friday, Sept. 19 5. Sensing and Traceability for Quality and Safety of Agroproducts Location: 302B,CNCC 6. Computer Vision and Image Processing Location: 302A,CNCC Tea Break 5. Sensing and Traceability for Quality and Safety of Agroproducts Location: 302B,CNCC 6. Computer Vision and Image Processing Location: 302A,CNCC Lunch Location:Plenary Hall A, CNCC 7. The Application of Mobile Communication Terminal in the Agricultural Informatics Location: 302B,CNCC 8.Decision Support Systems and Artificial Intelligence Location: 302A,CNCC Tea Break 7. The Application of Mobile Communication Terminal in the Agricultural Informatics Location: 302B,CNCC 8.Decision Support Systems and Artificial Intelligence Location: 302A,CNCC 16:00-17:00 Closing Ceremony Location:309A+B, CNCC 19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC 08:00-15:00 Technical Tours 171 SESSION VII, INFORMATION SYSTEMS 18TH WORLD CONGRESS OF CIGR ORAL PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-17:00 1. Keynote Speeches Location: Room 309B, the 3rd floor of CNCC Chairs: Prof. Yibin Ying, Professor of Faculty of Agriculture, Life and Environment Sciences, Zhejiang University, China Prof. Lalit Verma, incoming President of American Society of Agricultural and Biological Engineers, USA Time 13:30-13:50 13:50-14:10 14:10-14:30 14:30-15:00 Paper # Technical Presentations 0826-701 Innovation-driven thinking on the new generation ICT for agricultural modernization in China Prof. Maohua Wang Academician of Chinese Academy of Engineering, China 0826-702 IT in agriculture: a story of convergence Prof. Fedro S. Zazuta Ranaha Professor and Associate CIO of Office of Academic Technology, University of Florida, USA 0826-004 Information technology and agriculture – global challenges and opportunities. Prof. K. C. Ting Professor and Head of Department of Agricultural and Biological Engineering, University of Illinois at Urbana-Champaign, USA 2014-1169 Crop sensing –technologies and applications Prof. Naiqian Zhang Kansas State University, USA 15:00-15:15 Tea Break Location: Chair: Room 309B, the 3rd floor of CNCC Prof. Fedro S. Zazuta Ranaha, Professor and Associate CIO of Office of Academic Technology, University of Florida, USA 172 Time 15:20-15:40 15:40-16:00 16:00-16:20 16:20-16:40 16:40-17:00 Paper # Technical Presentations 0826-003 Light scattering technology for food property and quality assessment Prof. Renfu Lu Michigan State University, USA 0826-008 Precision farming: to meet the challenges of agriculture Prof. Chunjiang Zhao Director and Chief Scientist of National Engineering Research Center for Information Technology in Agriculture, China 0826-709 From internet of things to smart agriculture Prof. Nick Sigrimis Founder and President of spinoff Geomations SA-“from research and innovation to Social Exploitation”, founder and first Chair of CIGR-ICT section, USA 0826-708 Nano-biosensors for biodetection in agricultural and food systems Prof. Yanbin Li Professor of Zhejiang University, China 0826-720 Precision aerial application: Current and future trends Prof. Yubin Lan USDA-ARD, USA SEPTEMBER 17, 2014 WEDNESDAY MORNING 08:30-12:00 2. Keynote Speeches Location: Chairs: Room 309B, the 3rd floor of CNCC Prof. Daoliang Li, Director of EU-China Center for ICT in Agriculture, Professor of College of Information and Electrical Engineering, China Agricultural University, China Prof. Seishi Ninomiya, Professor of Institute of Sustainable Agro-Ecosystems, Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan Time 08:30-08:50 Paper # Technical Presentations 0826-710 Machine intelligence and automations for improved productivity, food quality, and profit Prof. Yang Tao Professor of Department of Bioengineering, University of Maryland, USA 173 08:50-09:10 09:10-09:30 09:30-09:50 10:00-10:15 0826-001 Key technologies of sensing and traceability for greenhouse production Prof. Suming Chen Professor of Department of Bio-Industrial Mechatronics Engineering, National Taiwan University, Chinese Taipei 0826-712 Terahertz (THz) spectroscopy and its application in quality and safety evaluation of agro-products Prof. Yibin Ying Professor of Faculty of Agriculture, Life and Environment Sciences, Zhejiang University, China 0826-006 Precision agriculture, livestock and aquaculture for Asian food production Prof. Naoshi Kondo Professor of Graduate School of Agriculture, Kyoto University, Japan Tea Break Location: Room 309B, the 3rd floor of CNCC Chair: Prof. Naoshi Kondo, Professor of Graduate School of Agriculture, Kyoto University, Japan Time 10:20-10:40 10:40-11:00 11:00-11:20 11:20-11:40 174 Paper # Technical Presentations 0826-002 ICT innovations for sustainable food production Prof. Seishi Ninomiya Professor of Institute of Sustainable Agro-Ecosystems, Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan 0826-715 Rural information network service status and prospects Prof. Wanlin Gao Dean of College of Information and Electrical Engineering of China Agricultural University 2014-0471 Delivering knowledge and solutions at your fingertips: a look at mobile apps and development in agriculture Dr. Jiannong Xin Joint faculty member at Office of Information Technology and Department of Agricultural and Biological Engineering, Institute of Agricultural and Food Sciences, University of Florida, USA 0826-007 Challenges and the State of Art in Internet of Things in Aquaculture in China Prof. Daoliang Li Director of EU-China Center for ICT in Agriculture, Professor of College of Information and Electrical Engineering, China Agricultural University, China 11:40-12:00 2014-1610 Dielectric sensors in an automated facility for testing salt tolerance of irrigated field crops Prof. Gerritvan Straten Emeritus professor of Wageningen University, the Netherlands SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 13:30-16:44 3. Agricultural Information Sensing Location: Moderator: Room 302B, the 3rd floor of CNCC Prof. Nick Sigrimis, Instrumentation and Automation in the Ag.University of Athens, Greece Time 13:30-13:42 13:42-13:54 13:54-14:06 14:06-14:18 14:18-14:30 Paper # Technical Presentations 2014-0140 Monitoring of soil water content by an electromagnetic access tube sensor Y. Suna University of Bonn, Germany 2014-1041 A method of photosynthetic rate prediction of tomato plants under solar greenhouse condition Man Zhang China Agricultural University, China 0618-059 Information system for estimating geometry and thermo-mechanical properties of biological products for simulating the heat and water transport processes Jerzy Weres Poznan University of Life Sciences, Poland 2014-0655 Analysis of the evaluation method for the recognition algorithm for occluded tomatoes based on the idea of measurement Rong Xiang China Jiliang University, China 2014-0095 Evaluation of different global navigation satellite systems and analyses of movement patterns of cattle on alpine pastures Jan Maxa Bavarian State Research Centre for Agriculture, Germany 175 14:30-14:42 14:42-14:54 15:00-15:15 Location: 2014-1022 The calibration model and key technology in ion flux non-invasive measurement of living plants in situ Lin Xue China Agricultural University, China 2014-1286 Successive projections algorithm on spectral multivariable selection with different calibration methods for the rapid Hailiang Zhang Zhejiang University, China Tea Break Room 302B, the 3rd floor of CNCC Moderators: Prof. Renfu Lu, Professor of Michigan State University, USA Prof. Huanyu Jiang, Professor of School of Biosystems Engineering and Food Science, Zhejiang University, China Time 15:20-15:32 15:32-15:44 15:44-15:56 15:56-16:08 16:08-16:20 176 Paper # Technical Presentations 2014-1276 Study of multifactor environmental warning model in swine culture Zhenli Cao China Agricultural University, China 2014-0119 Soil moisture monitoring using wireless sensor network RuixiuSui USDA-ARS CPSRU, USA 2014-0495 The research of topsoil moisture measurement based on dielectric constant method Qiaoli Wang Beijing Forestry University, China 2014-1138 The research of ion flow detection system of plant on LabVIEW Ziyang Wang China Agricultural University, China 0618-003 Temperature correction measurement model of soil nitrate nitrogen based on Ion Selective Electrode Ying Zhu China Agricultural University, China 4. Precision Agriculture and Intelligent Instrument Location: Room 408, the 4th floor of CNCC Moderator: Prof. Yang Tao, Professor of Department of Bioengineering, University of Maryland, USA Time Paper # Technical Presentations 13:30-13:42 2014-1169 Vehicle-based and handheld high-throughput phenotypers Naiqian Zhang Kansas State University, USA 13:42-13:54 2014-0281 The design and simulation of a novel gripper for the fruit picking robot Fuzeng Yang Northwest A&F University, China 0509-034 Scheduling model for cross-regional work of cotton-picker Naiqian Zhang China Agricultural University, China 0519-006 DBH and height measurement of trees based on a single scan of terrestrial laser scanner Gaochao Bu Beijing Forestry University, China 14:18-14:30 2014-1251 Detection of insect disease spots of processing tomato by LabVIEW Vision Zhuqing Ding Shihezi University, China 14:30-14:42 0523-007 Classification of greengrocery seeds based on near infrared spectroscopy Jun Sun Jiangsu University, China 0509-035 Design and development of biomechatronic products Shujun Zhang University of Gloucestershire, United Kingdom 13:54-14:06 14:06-14:18 14:42-14:54 15:00-15:15 Location: Tea Break Room 408, the 4th floor of CNCC Moderators: Prof. Gerritvan Straten, Professor of Emeritus professor of Wageningen University, the Netherlands Prof. Yi-Chich Chiu, Professor of Department of Biomechatronic Engineering and Dean of College of Bioresource, National Ilan University, Chinese Taipei 177 Time 15:20-15:32 15:32-15:44 15:44-15:56 15:56-16:08 16:08-16:20 16:20-16:32 16:32-16:44 Paper # Technical Presentations 2014-0942 A study of a shock-absorbing for an agricultural-purposed front-end loader with an electrohydraulic directional valve Jongwoo Ha Seoul National university, Korea 2014-1225 The application of intelligent robotic technique in agricultural field Yaolun Zhang University of Macau, Macau 2014-0399 Tube stamp for mechanical intra-row individual plant weed control Frederik Langsenkamp University of Applied Science Osnabrueck, Germany 2014-0241 Development of a general-purpose electric field robot Xiang Yin Shandong University of Technology, China 2014-0172 Intelligent control system of cluster multi-span photovoltaic greenhouse Liqing Zhao Qingdao Agricultural University, China 2014-0816 Cloud and IOT-based architecture and implementation of a greenhouse micro-climate management system Ruihua Wei Tongji University, China 0526-013 Sugarcane harvester cutter automatic control system design Yiqi Huang Guangxi University, China SEPTEMBER 18, 2014 THURSDAY MORNING 08:30-11:56 5. Sensing and Traceability for Quality and Safety of Agro-products Location: Room 302B, the 3rd floor of CNCC Moderator: Prof. Yanbin LI, Professor of School of Biosystems Engineering and Food Science, Zhejiang University, China 178 Time 08:30-08:42 08:42-08:54 08:54-09:06 09:06-09:18 09:18-09:30 09:30-09:42 09:42-09:54 Paper # Technical Presentations 2014-0114 Advanced techniques for detecting nitrogen status in rice Yubin Lan USDA-ARS, USA 2014-0582 NIR hyperspectral imaging for mapping of moisture content spatial distribution in tea buds during dehydration Keqiang Yu Zhejiang University, China 2014-1028 Research on detection moisture of intact meat based on discrete LED wavelengths Lifeng Fan China Agricultural University, China 2014-0666 Isolation of DNA from rice using silica-coated magnetic particles Liu Wang Zhejiang University, China 2014-0962 Self-assembled monolayers-based impedance immunosensor for rapid etection of escherichia coli O157:H7 using screen-printed interdigitated microelectrodes Zhanming Li Zhejiang University, China 2014-0470 Rapidly quantitative determination of soluble solids in bottled vinegar based on nirs and pls method Shanshan Yan Shanxi Agricultural University, China 2014-0680 Research of automatic purification technology for the harvested raw shrimp based on GLCM and ID3 Zihao Liu Zhejiang University, China 10:00-10:15 Tea Break Location: Room 302B, the 3rd floor of CNCC Moderator: Prof. Fedro Zazueta, Past President of CIGR, USA Time 10:20-10:32 Paper # Technical Presentations 0826-719 Ultrasensitive terahertz sensing of kanamycin sulfate with metamaterial Lijuan Xie Zhejiang University, China 179 10:32-10:44 10:44-10:56 10:56-11:08 11:08-11:20 11:20-11:32 6. 2014-0720 CyberGIS-enabled ConSEnT framework development for grain postharvest loss prevention Tao Lin University of Illinois at Urbana-Champaign, USA 2014-1082 Research on pork freshness detection using electronic nose sensor array and feature optimization Ningzhi Wang China Agricultural University, China 2014-0308 Nondestructive discrimination of the lettuce varieties based on hyperspectral technology combined with characteristic wavelengths Jun Sun Jiangsu University, China 2014-0965 Feasibility study of Superfloc127 in Ion-Selective Electrode Based Soil Nitrate-nitrogen Rapid Detection Linan Zhang China Agricultural University, China 2014-1023 Identification of data characteristics of plant stress responses based on dynamic monitoring of ion flux in vivo Lin Xue China Agricultural University, China Computer Vision and Image Processing Location: Room 302A, the 3rd Floor of CNCC Moderators: Prof. Suming Chen, Professor of Department of Bio-Industrial Mechatronics Engineering, National Taiwan University, Chinese Taipei Prof. Jian Wu, Professor of School of Biosystems Engineering and Food Science, Zhejiang University, China Time 08:30-08:42 08:42-08:54 180 Paper # Technical Presentations 2014-0818 Tomato yield mapping in green house using color image analysis and machine learning method Kyosuke Yamamoto The University of Tokyo, Japan 2014-0250 Precise in-situ measurement of pakchoi leaf area with an ad hoc machine vision based monitoring platform Liang Gong Shanghai Jiao Tong University, China 08:54-09:06 09:06-09:18 09:18-09:30 09:30-09:42 10:00-10:15 Location: 2014-1179 Study of plant growth measurement based on embedded vision system Qiaoyu Li China Agricultural University, China 2014-0256 Blind image quality assessment using compact visual codebooks Yan Long Northwest A&F University, China 0508-004 Grading system for tomato mechanized seedling based on machine vision SuboTian Shenyang Agricultural University, China 2014-1152 Automatic detection of paddy rice flowering from time-series RGB images taken under outdoor environment Wei Guo The University of Tokyo, Japan Tea Break Room 302A, the 3rd floor of CNCC Moderator: Prof. Gang Liu, China Agricultural University, China Time 10:20-10:32 10:32-10:44 10:44-10:56 10:56-11:08 Paper # Technical Presentations 2014-1414 Identification of cabbages and weeds in seedlings using spectral imaging Wei Deng Beijing Research Center for Information Technology in Agriculture, China 2014-1549 Study on detecting myzuspersicae infection of oilseed rape leaves using hyperspectral imaging technology Zaichun Zhuang Zhejiang University, China 2014-1351 Digital imaging technique to detect and count aphids in soybeans Sreekala Bajwa North Dakota State University, USA 2014-0504 Research on video flame detection of forest fire based on spatialtemporal feature Mingming Xu Nanjing Forestry University, China 181 11:08-11:20 2014-0960 Classification of pest species using multi-class support vector machine and computer vision Wenyong Li Beijing Research Center for Information Technology in Agriculture, China SEPTEMBER 18, 2014 THURSDAY AFTERNOON 13:30-15:06 7. The Application of Mobile Communication Terminal in the Agricultural Informatics Location: Room 302B, the 3rd Floor of CNCC Moderator: Dr. Tao Lin, Postdoctoral Research Associate of University of Illinois at UrbanaChampaign, USA Time 13:30-13:42 13:42-13:54 13:54-14:06 14:06-14:18 14:18-14:30 182 Paper # Technical Presentations 2014-0135 Research on remote identification of apple leaf disease based on Android platform Meijia Wang Northwest A&F University, China 2014-1066 Smartphone-based field disease recognition of wheat using Support Vector Machine Wenjing Ling China Agricultural University, China 2014-0200 Cloud services platform on modern livestock management and marketing Qiubo Xie Guangdong Institute of Modern Agricultural Equipment, China 2014-1269 Design and implementation of weixin public service platform for development & research center of china agricultural mechanization Qing Dong China Agricultural University, China 0508-006 Mobile terminal based accurate monitoring method for farm machinery operation Caicong Wu Peking University, China 2014-0523 The monitoring system of aquaculture based on ZigBee and android and GPRS Chenhu Xu Jiangsu University, China 2014-1062 Encrypted QR code creation and recognition system based on Android smartphone of egg tracing Xiaolin Zhan China Agricultural University, China 14:54-15:06 2014-0138 Research of birds song of He Chuan wetland monitoring system based on ARM and 3G Jiachen Ren Northwest A&F University 15:06- 16:00 Tea Break 14:30-14:42 14:42-14:54 SEPTEMBER 18, 2014 THURSDAY AFTERNOON 13:30-14:54 8. Decision Support Systems and Artificial Intelligence Location: Room 302A, the 3rd Floor of CNCC Moderator: Prof. Hongxin Cao, Deputy Director of Research Professor of Institute of Agricultural Economics and Information, Jiangsu Academy of Agricultural Sciences, China Time 13:30-13:42 13:42-13:54 13:54-14:06 Paper # Technical Presentations 2014-0631 Development of a driving simulator for auto-guidance tractor Xiongzhe Han Seoul National University, Korea 2014-1282 Detection of porcine lame walk based on Star skeleton model Weixing Zhu Jiangsu University, China 0618-001 Research on fuzzy control method of greenhouse temperature Haoran Zhang China Agricultural University, China 183 14:06-14:18 14:18-14:30 14:30-14:42 14:42-14:54 184 2014-0052 One multi-channel detection system for precision rapeseed drill performance based on time intervals Youchun Ding Huazhong Agricultural University, China 2014-0415 Air Inflation & Consumption Model of a Compressor-tank-ejector System for Tomato Robotic Harvesting Jizhan Liu Jiangsu University 2014-0056 Research of UAV data processing applied in agriculture Haiyang Yu Beijing agricultural information technology research center 2014-1083 Portunus trituberculatus larvae growth and development study and simulation Mingzhu HAO Ningbo University SESSION VII POSTER SESSIONS SEPTEMBER 18, THURSDAY 08:30 - 12:00 Topic (1) Sensing and traceability for quality and safety of agro-products No. 121 122 123 124 125 126 127 128 Poster # Paper # Paper Titles Name & Institution Country 0508-021 Efficiency Evaluation of Magnetic Nanoparticles Separation using an Automatic Nucleic Acid Isolation System Qin Jiang Key Laboratory of Agricultural information acquisition technology, Ministry of Agriculture Belgium 0509-009 Detecting Glucose in Honey Using Polymer-based Enzyme Biosensors Fu Yingchun College of Biosystems Engineering and Food Science, Zhejiang University China 0526-029 Detection of the Contents of Winter Wheat Based on LVF Zhao Yong Beijing Research Center for Information Technology in Agriculture China 71-004 20140375 The Application of Variable Selection Methods in Model Optimization for Assessing Sugar Content in Chestnut Using Near Infrared Spectroscopy Liu Jie Huazhong Agricultural University China 71-005 20140688 Technology Based on Multispectral Studies of Corn Nitrogen Luo Yuanli Northeast Agricultural University China 71-006 20141010 Rapid Detection of Trace Chlorpyrifos Pesticide Residues Based on Colorimetric Spectroscopy and SVM Li Wen Ministry of Education Key Laboratory of Modern precision agricultureSystem Integration Research, China Agricultural University China 71-007 20141011 A Review on Colorimetric Detection of Mercury in Water Using Gold Nanoparticles Wu Qiongyan College of Information and Electrical Engineering, China Agricultural University China 71-008 20141012 Study on the Optical Nondestructive Quality Detection Method of Mini-watermelon Zhang Di Department of Signal and Information Processing,China Arguriculture University China 71-001 71-002 71-003 185 129 130 131 132 133 134 135 136 137 186 Maize Seeds Authenticity Identification using Near-Infrared Spectroscopy and Chemometrics Jia Shiqiang College of Information and Electrical Engineering, China Agricultural University China 20141293 A Review on Magnetophoretic Immunoseparation Lin Jianhan Agricultural Information Acquisition Technology Key Lab of Ministry of Agriculture of China, China Agricultural University China 20141294 An Impedance Detector for Impedance Measurement and Data Analysis of Interdigitated Array Microelectrode for Rapid Detectionof Avian Influenza Virus Lin Jianhan Agricultural Information Acquisition Technology Key Lab of Ministry of Agriculture of China, China Agricultural University China 71-012 20141295 Development and Evaluation of a Nanoscale Magnetic Particle Based Bioseparator for Specific Separation and Concentration of E Coli O157:H7 Lin Jianhan Agricultural Information Acquisition Technology Key Lab of Ministry of Agriculture of China, China Agricultural University China 71-013 20141400 Detection of the Contents of Winter Wheat Based on the Portable JDSU Spectrometer Zhao Yong Beijing Research Center for Information Technology in Agriculture China 20141411 The Application of Infrared Thermography for Crop Detection Li Zhen College of Information Science and Technology, Agricultural University of Hebei China 71-015 20141418 Study on Vegetable Freshness Detection Based on the Portable LVF Spectrometer Yu Xiaoying College of information science and technology, Agricultural University of Hebei China 71-016 20141419 Using Hyperspectral Imaging to Detect Predominant Lesion of Rice Leaf Blast Ma Xu College of Engineering, South China Agricultural University China 20141601 Non-destructive Detection of Insect-infested Jujubes by Nearinfrared Diffuse Reflectance Spectroscopy Zhan JingJing College of Engineering,Shanxi Agricultural University China 71-009 71-010 71-011 71-014 71-017 20141186 POSTER SESSIONS SEPTEMBER 18, THURSDAY 13:30 – 17:00 Topic (2) Computer Vision and Image Processing No. 1 2 3 Poster # 72-001 72-002 72-003 Paper # Paper Titles Name & Institution Country 0519-002 Design of 3D High-resolution Camera Imaging Measurement System to Estimate the Yield of Rice Plant Zhang Yu Graduate School of Agricultural and Life Sciences, University of Tokyo China 0519-003 The Application of Imaging Sensing Technology for Precision Agriculture and Green Houses Zhang Yu Graduate School of Agricultural and Life Sciences, University of Tokyo China 0618-010 Simultaneous Measurement of Leaf Characteristics and Sclerotinia Lesion Area in Brassica Napus Based on Image Processing Lu Wenchao Beijing Research Center for Information Technology in Agriculture China Chi Dexia Shenyang agricultural university China 4 72-004 2014-0143 Experiment on Acquisition of The Navigation Information of The Unmanned Rice Transplanter Based on Machine Vision 5 72-005 2014-0600 A Strawberry Harvesting Endeffector with Large Misalignment Tolerance Based on Visual Servoing Wang Liang Ju China Agricultural University China 2014-0650 Extraction and Test of Characteristic Signal for Dynamic Sugarcane Node Based on Computer Vision Tang Shuxi Chinese Academy of Agricultural Mechanization Sciences China 2014-0958 Rice Flag Leaf Angle Detection Method Based on Machine Vision and K-means Zhai Guo Department of Optoelectronic Engineering, Chongqing University China 2014-1008 Research of Online Real Time Processing Model for Fluorescence Image of Electrical Signal in Plant Li Jun College of Information and Electrical Engineering, China Agricultural University China 2014-1175 Koi Tracking Strategy Based on Color Mixture Model Via Camshift Li Zhenbo College of Information and Electronic Engineering, China Agricultural University China 2014-1177 Pig Behavior Analysis System Based on Video Tracking Technology Li Zhenbo College of Information and Electrical Engineering, China Agricultural University China 6 7 8 9 10 72-006 72-007 72-008 72-009 72-010 187 11 12 13 14 15 16 17 18 19 20 21 188 72-011 72-012 72-013 72-014 72-015 72-016 72-017 72-018 72-019 72-020 72-021 2014-1180 Crab Tracking Using a BiologicalLimit-Based Camshift Guided Particle Filter Li Zhenbo College of Information and Electronic Engineering, China Agricultural University China 2014-1203 Ripe Strawberry Fruit Recognition and Positioning Based on Multi-source Images Zang Li Jiao Ministry of Education, China Agricultural University China 2014-1221 Methods of Nondestructive Measurement for Kernel Weight of Maize Based on Multi-source Image Fusion Zhou Jinhui College of Information and Electrical Engineering, China Agricultural University China 2014-1259 Study on Searching for Growth Point of Tomato Axillary bud Based on Image-Processing Wang Meng College of Biosystems Engineering and Food Science, Zhejiang University China 2014-1277 Methods of Fast Nondestructive Measurement for Yield Component Traits of Maize Based on Machine Vision Zhou Jinhui College of Information and Electrical Engineering, China Agricultural University China 2014-1303 Design Measurement Matrix of Apple Image Based on Compressed Sensing Xiao Ying College of Information and Electrical Engineering, China Agriculture University China 2014-1305 Research on Apple Image Sparse Sampling Based on Compressed Sensing Xiao Ying College of Information and Electrical Engineering, China Agriculture University China 2014-1325 Study of Image Stitching and Wheat Leaf Extraction Using UAV Based Multispectral Image Li Han College of Information and Electrical Engineering, China Agricultural University China 2014-1368 Estimation Nutrient Content of Soils by Reflectance Spectroscopy Hu Guotian Mech. & Elect. Engineering, Northwest A&F University China 2014-1412 Research on Localization Method of Overlapping Apples Based on Maxima Hu Chanli School of electrical information engineering, Jiangsu university China 2014-1506 Research on Cotton Image Segmentation and Extraction for Cotton-picking Robot Guo Hui College of Mechanical and Traffic, Xinjiang Agriculture University China 22 23 24 72-022 72-023 72-024 2014-1579 Research on Online Achievement Display System Based upon Image Mosaic for Agricultural Science and Technology Tao Hongyan College of Information and Electrical Engineering, China Agricultural University China 2014-1591 Cell Tray Seeding Quantity Estimation of Super Hybrid Rice Based on Machine Vision and BP Neural Network Tan Suiyan College of Science, Applied Physic Branch, South China Agricultural University China 2014-1622 The research of morphological structure analysis of different mice livers based on threedimensional reconstruction Tian Lijun College of Information and Electrical Engineering, China Agriculture University China Topic (3) Agricultural Information Sensing No. 25 26 27 28 29 30 31 Poster # 73-001 73-002 73-003 73-004 73-005 73-006 73-007 Paper # Paper Titles Name & Institution Country 0509-040 A Service Granularity Optimization Design Method for Soil Moisture Monitoring in Cloud Computing Li Shuihua Institute of Agricultural Resources and Regional Planning, Chinese Academy of Agricultural Sciences China 0618-002 Research on Control Methods of Greenhouse Production System based on Environment-crop Model Chen Lijun College of Information and Electrical Engineering, China Agricultural University Belgium 0618-004 The Development of Greenhouse Environment Temperature Data Collector Liu Kun College of Information and Electrical Engineering, China Agricultural University China 0618-005 Wireless Remote Measurement System of Greenhouse Environment Liu Ying College of Information and Electrical Engineering, China Agricultural University China 0618-006 Soil Nitrate-nitrogen Measurement System based on C805Land and WaterF020 Cao Shushu Department of Electronic Engineering ,College of Information and Electrical Engineering, China Agricultural University China 0618-007 Design and Implementation of Wireless Sensor Network Nodes in Greenhouse environment Monitoring Chen Siqi Department of Electronic Engineering, China Agricultural University China 0618-026 Pyrolysis characteristics and kinetics of Phoenix tree residues Liu Le Department of Engineering, Nanjing Agricultural University China 189 32 33 34 73-008 73-009 73-010 2014-0120 Integrated Sensor System for Rice Conditions Monitoring Based UGV Lan Yubin South China Agricultural University, Key Laboratory of Key Technology on Agricultural Machine and Equipment United States 2014-0199 Intelligent Monitoring and Scheduling Management Information System of Lingnan Characteristic Fruits Guo Peipei Guangzhou Jiankun Network Technology Development Co., Ltd China 2014-0316 Study on Nondestructive Monitoring Technology of Drought Stress Information in the Wheat Seedling Stage Wu Qiong Shengyang Agricuture University, College of Information and Eletrical Engineering China Yu Shanshan Nanjing Agricultural University China 35 73-011 2014-0394 The Application of Small Unmanned Aerial Systems for Remote Sensing and Scientific Research: A Review 36 73-012 2014-0395 Classified Aassessment of Chinese Commercial Manure Composts Using Near Infrared Spectroscopy Huang Guanqun China Agricultural University China 2014-0599 A Low Altitude Remote Sensing Platform for Small Scale Agricultural Land Investigation Su Baofeng College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling China Gao Baihui Northeast Agricultural University 37 73-013 38 73-014 2014-0676 Research on Monitoring System for Edible Fungi Cultivation Environment Based on ZigBee Technology 39 73-015 2014-0689 Study on Farmland Irrigation Remote Monitoring System Based on ZigBee Li Jiao Northeast Agricultural University On-site Measurement Cadmium and Lead in Soil Using a Disposable Bismuth/Ionic Liquid Modified Electrochemical Sensor Wang Zhiqiang, Key Lab of Modern Precision Agriculture System Integration Research, Ministry of Education of China, China Agricultural University China 2014-0966 Modeling of Influences on ISEbased Soil Slurry Measurement Using Response Surface Analysis Pan Pu Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education, China Agricultural University China 2014-1013 Design of Crop Water Monitoring System Based on Multi-sensor and Physiological State Wang Yongqian College of Information and Electrical Engineering, China Agricultural University China 40 41 42 190 73-016 73-017 73-018 2014-0877 43 44 45 46 47 73-019 73-020 73-021 73-022 73-023 2014-1043 A WSN System for Monitoring Environment and Crop Growth Information in Grassy Ranch Zhan Man Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education, China Agricultural University 2014-1085 Research on Electrical Resistivity Tomography for Mapping the Root Zone in Soil Wang Zhijie College of Information and Electrical Engineering, China Agricultural University China 2014-1108 The Network Connectivity of Wireless Sensor Networks under the Environment of Farmland Chen Yang College of Information and Electrical Engineering, China Agricultural University China Regression-assisting with External Variable for Predicting Soil Organic Matter in a Complex Terrain Zone Ye Huichun Key laboratory of Digital Earth Science, Institute of Remote Sensing and Digital Earth, Chinese Academy of Sciences, Beijing 100094, China China Application of Artificial Neural Network in Soil Available Potassium Monitoring using a Dual-sensor System Zhang Miao Key Laboratory on Modern Precision Agriculture System Integration Research of Ministry of Education, China Agricultural University China 2014-1322 2014-1407 China Topic (4) Precision Agriculture and Intelligent Instrument No. Poster # Paper # Paper Titles Name & Institution Country Yang Guangyou Agricultural Machinery Institute, Hubei University of Technology China 48 74-001 0519-008 Research of Radio Channel Model Oriented to Agricultural Greenhouse Wireless Sensor Network 49 74-002 2014-0156 Headland Turning Control Method of Autonomous Agricultural Machine Huang Peichen South China Agricultural University China 50 74-003 2014-0265 A Multi-robot Following System Based on Stereovision Yang Fuzeng Northwest A&F Universit China 51 74-004 2014-0271 Research and Design of Agricultural Multi-robot Wireless Communication Platform Yang Fuzeng Northwest A&F University China 52 74-005 2014-0272 Research on Agricultural Robot Platform and Control System Design Yang Fuzeng Northwest A&F University China 191 53 74-006 2014-0314 Propagation Characteristics of Rradio Wave in Plastic Greenhouse 54 74-007 2014-0349 Intelligent Facilities Fishpond Design of Breeding Schizothorax Prenanti Zou Zhiyong Sichuan Agricultural University 2014-0425 Automatic Navigation System Research for Rice Planter Wei Liguo Chinese Academy of Agricultural Mechanization Sciences 2014-0534 Network Information Technologybased Information Service Platform of Agricultural Machinery Liu Yangchun Chinese Academy of Agricultural Mechanization Sciences, Beijing 100083, China China Sliding-Mode Variable-Structure Control of Agricultural machinery Based On Exact Feedback Linearization Bai Xiaoping Key laboratory of Industrial Informatics, Shenyang Institute of Automation Chinese Academy of Sciences, Shenyang 110016, China China China China 55 56 57 74-008 74-009 74-010 2014-0541 Wang Jizhang Jiangsu University China China 58 74-011 2014-0579 Research on Fuzzy Self-adjusting PID for Quadrocopter Liu Haopeng College of Engineering & Technology, Huazhong Agricultural University, Wuhan, Hubei, 430070, P.R.China 59 74-012 2014-0829 Design of a Portable Detector for Soil Organic Matter Measurement Niu Yaliang Shanxi Agricultural University 2014-0855 Design and Experiment of A Vegetable Grafting Machine Operated by One Person for Cucurbitaceous Seedlings Cultivated in Humus Pots Chu Jia College of Engineering, China Agricultural University Design of a Soil Macronutrient Detection Platform Based On Fluidic Control Technology Ren Haiyan Key Laboratory on Modern Precision Agriculture System Integration Research of Ministry of Education, China Agricultural University China Design of Portable Multi-channel System for Physiological Signal Acquisition Li Ting College of Information and Electrical Engineering, China Agricultural University, Beijing 100083, China China 60 61 62 192 74-013 74-014 74-015 2014-0964 2014-0998 63 64 65 66 67 68 69 70 71 74-016 74-017 74-018 74-019 74-020 74-021 74-022 74-023 74-024 2014-1042 Detection Algorithm of Crop Baseline for Off-road Vehicle Based on Boundary Detection and Scan-filter Zhan Man Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education, China Agricultural University China 2014-1092 An Automation System for Oestrus Detection in Group Housed Sows Zhang Hao College of Information and Electrical Engineering, China Agricultural University China Research of Self-learning Navigation Patrol Robot System Xu Bo Department of Mechatronic Engineering, College of Engineering, China Agricultural University, Beijing, China China 2014-1107 The Measure Method of Steering Angle for Agricultural Vehicle Zhang Zhigang Key Laboratory of Key Technology on Agricultural Machinery and Equipment, Ministry of Education, South China Agricultural University China 2014-1116 Research Status and Prospects of Cleaning Loss Detection Technology On Harvesting Machine Wang Suzhen Nanjing research institute for agriculture Mechanization, Ministry of Agriculture China 2014-1127 Development of Glass Microelectrodes Pipette Puller Based on Monitoring and Controlling Heating Strength Wang Yuan College of Information and Electrical Engineering, China Agricultural University China 2014-1347 Discrimination of Phosphorus in Lettuce using VIS-NIR Spectroscopy Combined with Characteristic Variables Selection and Extreme Learning Machine Gao Hongyan Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education & Jiangsu Province, Jiangsu University China 2014-1422 An Approach to Crop Location for Robotic Intra-row Weeding Li Nan College of Engineering, China Agricultural University China 2014-1541 Design of Navigation Monitoring Software Based on WinCE for Agricultural Vehicle Zhang Yajiao Engineering College, South China Agricultural University, Guangzhou 510642, China China 2014-1105 193 72 74-025 2014-1577 Research and Design of a Pig Farm Management System Dong Zhiwen College of Information and Electrical Engineering, China Agriculture University 73 74-026 2014-0201 Defining Fertilization Formulations (N-P-K) for Crops Using A Computer Application Arturo Chong Eslava Autonomous University of Chapingo Mexico Topic (5) Decision Support Systems and Artificial Intelligence No. 74 75 76 77 78 79 80 81 194 Poster # 75-001 75-002 75-003 75-004 75-005 75-006 75-007 75-008 Paper # Paper Titles Name & Institution Country 0509-001 Research on Intelligent Greenhouse Remote Control System Based on VC++ 6.0 Wang Jun College of Biological and Agricultural Engineering, Jilin University China 0514-001 Simulation of Temperature Model and Energy Management for Solar Greenhouse Li Li Key Laboratory on Modern Precision Agriculture System Integration Research of Ministry of Education, China Agricultural University China 0514-012 Management of Agricultural Plastic Waste Fluxes by Means of Specifically Designed Information System Evelia Schettini Department of Agricultural and Environmental Science DISAAT – University of Bari 2014-0034 Analysis of Calves Feed Intake and Rumen Growth Based on Process Date of A Multi Sensor Feeding System Viktoria Ehrl Technische Universitaet Muenchen, Agricultural Systems Engineering Germany 2014-0330 Research of the Early Warning Model of the Facility Agriculture Disease and Insect Based on Rough Neural Network Wang Dengwei National Engineering Research Center for Information Technology in Agriculture China 2014-0608 Research on Augmented Reality Plant Growth Simulation Method Based on NyARToolkit Zhao Pengfei National Engineering Research Center for Information Technology in Agriculture China 2014-0979 Error Analysis and Correction Method for Automatic Monitoring Data of Soil Moisture Hao Xingyao National Engineering Research Center for Information Technology in Agriculture China 2014-1006 Multimedia Training System Based on the Gesture-recognition Operation and User Behavior Analysis Tian Yuxuan College of Information and Electronic Engineering, China Agriculture University China Italy 82 83 84 85 86 87 88 89 90 91 75-009 75-010 75-011 75-012 75-013 75-014 75-015 75-016 75-017 75-018 2014-1019 The Measurement of Liquid viscous Coefficient Based on the Metal Induction Falling Sphere Method Lu Wei College of Engineering, Nanjing Agricultural University China 2014-1021 The Diagnosis Method of the Corn's Water Shortage Based on the Vibration Information Lu Wei College of Engineering, Nanjing Agricultural University China 2014-1045 The Fault Diagnosis Expert System for the IOT in the Aquaculture ChenYingyi College of information and Electrical Engineering, China Agricultural University China 2014-1046 Quick and Automatic Generation Method for the Evaluation Report of the Small Hydro Project ChenYingyi College of information and Electrical Engineering, China Agricultural University, Bejing 100083,P.R. China China 2014-1047 Focused Crawler-Based Smart Push Technology for Market Information of Ten agricultural Industry Platform Chen Yingyi College of information and Electrical Engineering, China Agricultural University, Bejing 100083,P.R.China China 2014-1048 The Simulation System for Ecosystem of Fish-Vegetable Mutualism Based on Discrete Algorithm Chen Yingyi College of information and Electrical Engineering, China Agricultural University, China 2014-1049 Design and Implementation of the Management and Evaluation System for Small Hydropower Substitute Fuel Project Chen Yingyi College of Information and Electrical Engineering, China Agricultural University China 2014-1050 A Feeding Mathematical Model to Estimate Feeding Requirement of Fugu Rubripes (Temmincket Schlegel) Chen Yingyi College of information and Electrical Engineering, China Agricultural University China 2014-1051 Aquaculture Access Control Model in Intelligent Monitoring and Management System Based on Group/Role ChenYingyi College of Information and Electrical Engineering, China Agricultural University China Design and Implementation of Monitoring System of Agricultural Prices Li Zhenbo College of Information and Electrical Engineering, China Agricultural University China 2014-1176 195 92 93 94 95 96 97 98 99 100 196 75-019 75-020 75-021 75-022 75-023 75-024 75-025 75-026 75-027 2014-1265 An Intelligent and Accurate GNSS-controlled Land Leveling System and Related Experiments Li Xiao Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education China Agricultural University 2014-1270 Research on Power Quality Monitoring and Evaluation System Based on OSGi Framework Gao Wanlin College of Information and Electrical Engineering, China Agricultural University China 2014-1288 The Realization of Real-time Navigation Technology in GNSScontrolled Land Leveling System Wang Yan Key Laboratory for Modern Precision Agriculture System Integration Research, Ministry of Education, China Agricultural University China 2014-1327 Healthy Mouse: a New Method of Monitoring Human Physiological Signs Information in Real Time Sun Ping College of Information and Electrical Engineering, China Agricultural University China 2014-1433 Research and Design of Programming problem Automatically Evaluation System Li Jing College of Information and Electrical Engineering, China Agricultural University China Research and Application on Slope Land Leveling Method Based on GNSS Liu Gang Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education China Agricultural University China 2014-1574 Research on Investment and Financing Ways for Agricultural High and New Technology Wang Shuangling College of Information and Electrical Engineering, China Agricultural University China 2014-1575 Research on Personalized Achievement Recommendation System for Agricultural Science and Technology Tao Hongyan College of Information and Electrical Engineering, China Agricultural University China 2014-1580 Research on Online Evaluation System for Technology Perspectivein Agricultural Science and Technology Achievements Wang Shuangling College of Information and Electrical Engineering, China Agricultural University China 2014-1525 China 101 102 75-028 75-029 2014-1620 Tracking and Positioning Technology for Free-range Livestock Lei Hongzhou College of Information and Electrical Engineering, China Agricultural University China 2014-1633 Online Assessment System: A New Approach to Evaluating Agricultural Technological Achievements Ren Yanzhao College of Information and Electrical Engineering, China Agricultural University China Topic (6) No. 103 104 105 106 107 108 109 Poster # 76-001 76-002 76-003 76-004 76-005 76-006 76-007 The Application of Mobile Communication Terminal in the Agricultural Informatics Paper # Paper Titles Name & Institution Country 0618-058 The solution of agricultural products traceability system based on the Internet of things technology and cloud computing platform Lu Changhua Institute of Veterinary Medicine, Jiangsu Academy of Agricultural Sciences, Key Laboratory of Veterinary Biologicals engineering and technology, Ministry of Agriculture, National Center for Engineering Research of Veterinary Bio-products, China 2014-0593 Supply Chain Traceability System Platform Development about Agricultural Products Based on NFC Sun Xu Key Laboratory of Bionic Engineering of Ministry of Education Jilin University, Changchun Jilin China China 2014-0957 Rapid Non-destructive Measurement of Wheat Spike Characteritics Using Android Smartphone Lu Wenchao Beijing Research Center for Information Technology in Agriculture China 2014-1009 Research on Identification Technology of Chinese-sensible Code Based on Smart Phone Guo Haitao College of Information and Electrical Engineering, China Agricultural University China 2014-1030 QoE-aware Smartphone-based Surveillance Video Transmission Ling Wenjing College of Information and Electrical Engineering, China Agriculture University China 2014-1188 The Research of Massive Data Processing of the Internet of Things on Livestock and Poultry Chen Nanxin College of Information and Electrical Engineering, China Agricultural University China 2014-1195 Big Data: Challenges and Opportunities for Smart Grids and Smart Meters Gao Wanlin College of Information and Electrical Engineering, China Agricultural University China 197 110 111 112 113 114 115 116 117 118 119 198 76-008 76-009 76-010 76-011 76-012 76-013 76-014 76-015 76-016 76-017 2014-1312 Mobile Health Sensing Ubiquitous Service : System and Pattern Sun Wenxia College of Information and Electrical Engineering, China Agricultural University 2014-1324 Intelligent Farm for Relaxation Based on Internet of Things: Management System and Service Mode Yu Lina College of Information and Electrical Engineering, China Agricultural University China 2014-1326 A Content Management System Which is Based on SOA Architecture and Can Be Customized Wang Shiqiang College of Information and Electrical Engineering,China Agricultural University China 2014-1329 An Idea to Capture the Big Data on the Area of Nutrition and Health based on Data Capture Sun Pingping College of Information and Electrical Engineering,China Agricultural University China 2014-1390 An Approach to Online Document Management for Information Resources Wang Jie College of Information and Electrical Engineering, China Agricultural University China 2014-1391 Mobile Psychology Sensing Expert System: A New Way to Make Psychology Accessible to Chinese People Sun Wenxia College of Information and Electrical Engineering, China Agricultural University China 2014-1392 An On-line Intelligent Measurement Terminal of Live Pigs’ Backfat Thickness Based on Ultrasonic Luo Xuan College of Information and Electrical Engineering, China Agricultural University China 2014-1393 Research and Development on WBAN’s Vital Signs Monitoring Device Su Yu College of Information and Electrical Engineering, China Agricultural University China 2014-1477 OFIS Data Exchange Platform for Interaction with Agricultural Information Systems Kim, JoonYong Department of Biosystems Engineering, Seoul National University Korea 2014-1542 Research and Implementation on Online Evaluation System for Achievements in Agricultural Science and Technology Jin Yanyun College of Information and Electrical Engineering, China Agricultural University China China 120 121 122 123 124 125 126 127 128 129 76-018 76-019 76-020 76-021 76-022 76-023 76-024 76-025 76-026 76-027 2014-1551 An Acoustic Signal Acquisition and Processing System Based on LabVIEW Han Meng College of Information and Electrical Engineering, China Agricultural University China 2014-1553 Based on the Study on the Agricultural Technology Service of Network Technology and Discussion Zhao Long Information system integration research and development center, China agricultural university China 2014-1555 Agricultural Expert Network Technology Research and Discussion on Service Delivery Xin Cuihong Department of Engineering, China Agricultural University China 2014-1557 Research and Implementation of Agricultural Science and Technology Achievements Online Management Gao Zheng Department of Engineering, China Agricultural University China 2014-1564 Research and Discussion on Agricultural Information Service Modes Based on Network Technology Shi Kaite College of Information and Electrical Engineering, China Agricultural University China 2014-1568 Research and Implementation of the Investment and Financing System Based on Agricultural Science and Technology Network Gao Yujia Department of Engineering, China Agricultural University China 2014-1571 Study On Industry-UniversityResearch Collaboration Mode Based On Network Technology In Agriculture Wang Shuhui College of Information and Electrical Engineering, China Agricultural University China 2014-1572 Study and Discuss on the Agricultural Trading Service Based on Network Technology Gao Wanlin Department of Engineering, China Agricultural University China 2014-1573 Research and Implementation of Agricultural Technology Supply And Demand Docking Services System Based on Network Technology Gao Wanlin Department of Engineering, China Agricultural University China 2014-1634 Study on Water Resources Professional Softwaredevelopment in Cloud Computing Environment Jiang Xinlan College of Information and Electrical Engineering, China Agricultural University China 199 THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION VIII AGRICULTURAL MACHINERY STANDARDIZATION 200 Overview of Session VIII:Agricultural Machinery Standardization Monday, Sept. 15 08:00-20:00 Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:30-09:30 Opening Ceremony Location:Plenary Hall B, CNCC 09:30-09:40 Tea Break 09:40-12:10 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC 12:10-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 1. Keynote Speeches Location: 302B,CNCC 15:00-15:15 Tea Break 15:15-17:15 1. Keynote Speeches Location: 302B,CNCC 19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC 08:30-10:00 Technical Oral Presentation Technical Presentation Location: 302B,CNCC 10:00-10:15 Tea Break 10:15-12:00 Technical Oral Presentation Technical Presentation Location: 302B,CNCC 12:00-13:30 Lunch Location:Plenary Hall A, CNCC 19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre 16:00-17:00 Closing Ceremony Location:309A+B, CNCC 19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC 08:00-15:00 Technical Tours Tuesday, Sept. 16 Wednesday, Sept. 17 Thursday, Sept. 18 Friday, Sept. 19 201 OPENING CEREMONY OF SESSION VIII, AGRCULTURAL MACHINERY STANDARDIZATION 18TH WORLD CONGRES OF CIGR ORAL PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-17:15 Location: Room 302B, the 3rd floor of CNCC Chair: Prof. Xiansheng Zhang, Assistant President of Chinese Academy of Agricultural Mechanization Sciences, China 13:30-14:00 Opening speech by Prof. Xiansheng Zhang Keynote Speeches Time 14:00-14:30 14:30-15:00 Paper # Technical Presentations 0826-801 Mutual recognition of internationalization of agricultural machinery Mr. Darrin Drollinger American Society of Agricultural and Biological Engineers, USA 0826-802 The growing importance of regulations on crop protection equipment and the role of standards the case of Europe Mr. Jean-Christophe Rousseau Berthoud, France 15:00-15:15 Tea Break Location: Room 302B, the 3rd floor of CNCC Chair: Mr. Darrin Drollinger, Executive Diretor of American Society of Agriculturaland Biological Engineers, USA Time 15:15-15:45 15:45-16:15 202 Paper # Technical Presentations 0826-803 Chinese agricultural machinery mechanization Mr. Xiansheng Zhang Chinese Academy of Agricultural Mechanization Science, China 0826-804 Building a performance based approach Mr. Randall Joseph Renze John Deere, USA 16:15-16:45 16:45-17:15 0826-805 Tailoring in international standards Mr. Eric B Smith John Deere, USA 0826-806 Combination of standardization and testing in agricultural machinery Mr. Ibrahim Saleh MacDon Industries, Canada SEPTEMBER 17, 2014 WEDNESDAY MORNING 08:30-12:00 Technical Presentations Location: Room 302B, the 3rd Floor of CNCC Chair: Mr. Darrin Drollinger, Executive Director of American Society of Agricultural and Biological Engineers, USA Time 08:30-08:50 08:50-09:10 09:10-09:30 09:30-09:50 Paper # Technical Presentations 2014-0609 Parameter optimization of corn ear vertical drying based on the BP neural network and genetic algorithm Wuyun Zhao Gansu Agricultural University, China 2014-1332 Experimental study on constant pressure control based on PWM variable spray Jiachen Zhang Beijing Research Center for Information Technology in Agriculture, China 2014-0255 Effect of soil parameters on performance of tillage machines Mehrez bashar South China Agricultural University 2014-0457 Hydro-mechanical transmit performance analysis for a continuously variable transmission Liang He Nanjing Agricultural University, China 10:00-10:15 Tea Break Location: Room 302B, the 3rd Floor of CNCC Moderator: Mr. Xiansheng Zhang, Assistant President of Chinese Academy of Agricultural Mechanization Sciences, Beijing, China. Time 10:15-10:35 Paper # Technical Presentations 2014-0544 Modeling agricultural tractor motion on sloping ground considering longitudinal and lateral gradients Zhen Li Kyushu University, Japan 203 10:35-10:55 2014-0197 The simulation study of vehicle Hydro-Mechanical continuously variable transmission test based on AVL Jiangguo Xi Henan University of Science and technology, China 10:55-11:15 11:15-11:35 11:35-11:55 204 0618-030 Investigation on vibration characteristic of hand tractor Sovatna Phon Kyushu University, Japan 2014-0898 Vertical vibration measurement of the operator seat in an agricultural tractor Theodoros A. Gialamas Technological Educational Institute of Thessaly, Greece 2014-0192 Sensor controlled crop compaction in case of silage bagging Gerd-Christian Maack Institut für Landtechnik University of Bonn, Germany SESSION VIII POSTER SESSIONS SEPTEMBER 17, WEDNESDAY 13:30 - 17:00 No. 123 124 125 Topic (1) Safety, Energy, Saving and Emission of Agricultural Machinery Poster # Paper # 81-001 81-002 81-003 Topic (2) NO. 126 127 128 Name & Institution Country 2014-1605 Institutional Obstacles for Standardization in China : A Case Study for Agricultural Machinery Huang Caijin China Agricultural Machinery Testing Center China 2014-0734 High Dynamic Control of A Permanentmagnet Synchronous Motor for Agricultural Electric Vehicles Ji Jinghua School of Electrical and Information Engineering, Jiangsu University, Zhenjiang China 2014-0502 Resistance power experiment study for excavating-shovel of corn root stubble excavating and placement harvester Yu Yonghong Jiamusi University China Standardization and Combination of Agronomics and Agricultural Machinery Poster # 82-001 Topic (3) No. Paper Titles 2014-1130 83-002 Paper Title Name & Institution Country Design and Experiment of Pneumatic Precision Millet Seed-metering Device Zhao Xiaoshun College of Mechanical and Electrical Engineering, Agricultural University of Hebei China Combination of Standardization and Testing in Agricultural Machinery Poster # 83-001 Paper # Paper # Paper Titles Name & Institution Country 2014-0024 Stability and Reliability Analysis of Valve-Controlling Hydraulic Power System for Flexible Pesticide Sprayer Chassis Zhang Hua College of Mechanical and Electronic Engineering, Nanjing Forestry University China The Research of Getting Ecological Hydraulic Circuits of Agricultural and Forestry Tractors Tkac Zdenko Department of Transport and Handling, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra, Slovakia Slovakia 2014-0725 205 129 130 131 132 83-003 83-004 83-005 83-006 Topic (4) No. 133 134 Poster # 84-001 84-002 2014-0978 2014-0992 2014-1125 2014-1337 The Current Situation of Testing Standards for Small Wind Turbine Yao Ming College of Engineering and Power Engineering Inner Mongolia University of Technology China Rapid Modeling Method of Small Wind Turbine Blade Li Heng College of Engineering and Power Engineering Inner Mongolia University of Technology China An Optimization Solution of Tractorplough System Taking Additional Weight Based on NSGA- Ⅱ Liu Mengnan College of Vehicle and Traffic Engineering, Henan University of Science and Technology China The Influence of Panax Notoginseng Seed Particles on Measurement of Suspension Velocity Gao Xiaojun Faculty of Modern Agricultural Engineering, Kunming University of Science and Technology China Mutual Recognition of Internationalization of Agricultural Machinery Paper # Paper Titles Name & Institution Country 2014-0597 The Ride Comfort Analysis of Corn Harvester-based on the Total Value of Ride and Vibration Dose Zhou Lin China Agricultural Mechanization Institute of Science China 2014-1118 Study on Evaluation of Rough Processing Mechanization Degree of Main Agricultural Products in China Liu Qing Institute of AgroProducts Processing Engineering, Chinese Academy of Agricultural Engineering China Wei Qing Collage of Engineering, China Agricultural University China Wu Bei China Agricultural University China 135 84-003 2014-1121 Construction of Agricultural Product Primary Processing Mechanization Level Evaluation Index System 136 84-004 2014-1563 Study on the Technical Regulation of Alfalfa Hay Mechanized Harvesting 206 THE 18TH WORLD CONGRESS OF CIGR SESSIONS OF CONGRESS SESSION IX ASIA FORUM 207 Overview of Session IX: Asia Forum Monday, Sept. 15 08:00-20:00 Registration Location:the open place on the 1st floor near the Delegates Access Gate C2, CNCC 08:30-09:30 Opening Ceremony Location:Plenary Hall B, CNCC 09:30-09:40 Tea Break 09:40-12:10 Congress Plenary with Invited Speakers Location:Plenary Hall B, CNCC 12:10-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 Session Opening Ceremony & Keynote Speeches Location: 302A,CNCC 15:00-15:15 Tea Break 15:15-16:45 Session Opening Ceremony & Keynote Speeches Location: 302A,CNCC 19:00-21:00 Welcome Reception Location:Plenary Hall A, CNCC 08:30-10:00 Technical Oral Presentation Small-scale Agricultural Mechanization Location: 302A,CNCC 10:00-10:15 Tea Break 10:15-12:00 Technical Oral Presentation Small-scale Agricultural Mechanization Location: 302A,CNCC 12:00-13:30 Lunch Location:Plenary Hall A, CNCC 13:30-15:00 AAAE 25th Executive Council Meeting Location: 302A,CNCC 15:00-15:15 Tea Break 15:15-16:50 AAAE 25th Anniversary Celebration (Asia Summit) Location: 302A,CNCC 16:50-17:00 Session Closing Ceremony Location: 302A,CNCC 19:30-21:30 Chinese Cultural Night Location:Beijing Performance & Arts Centre 16:00-17:00 Closing Ceremony Location:309A+B, CNCC 19:00-21:00 Gala Dinner Location:Plenary Hall A, CNCC 08:00-15:00 Technical Tours Tuesday, Sept. 16 Wednesday, Sept. 17 Thursday, Sept. 18 Friday, Sept. 19 208 OPENING CEREMONY OF SESSION IX ASIA FORUM 18TH WORLD CONGRESS OF CIGR ORAL PRESENTATIONS SEPTEMBER 16, 2014 TUESDAY AFTERNOON 13:30-16:45 Location: Room 302A, the 3rd Foor of CNCC Chair: Prof. Lanfang Zhang, Secretary General of AAAE, Deputy Director of Department of International Cooperation, Chinese Academy of Agricultural Mechanization Sciences, China 13:30-13:40 Opening speech by Prof. Lanfang Zhang 13:40-13:50 Remarks by Mr. Yoshisuke Kishida, Vice President of AAAE, President of ShinNorinsha Co., Ltd., Japan 13:50-14:00 Address by Dr. Zhongli Pan, Vice President of AAAE, Department of Biological and Agricultural Engineering, University of California, Davis Technical Presentations Keynote Speeches Location: Room 302A, the 3rd Floor of CNCC Chair: Prof. Vilas M. Salokhe, President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India Time Paper # Technical Presentations Agricultural mechanization in India: lessons for developing countries 14:00-14:30 0618-076 Prof. Gajendra Singh Former President of ISAE, Professor of Indian Agricultural research Institute (IARI), India Biomimetic techniques in agriculturalmachinery 14:30-15:00 0526-034 Prof. Jin Tong Vice President of CSAE, China, Director of the Key Laboratory for TerrainMachine Bionics Engineering, Ministry of Education, China; Professor of School of Biological and Agricultural Engineering, Jilin University, China 209 15:00-15:15 Tea Break Location: Room 302A, the 3rd Floor of CNCC Chair: Prof. Haile Ma, Vice President of AAAE, Professor and President of School of Food and Biological Engineering, Jiangsu University, China Time 15:15-15:45 15:45-16:15 16:15-16:45 Paper # Technical Presentations 0618-103 Remote sensing of plant phenotyping and vegetation functioning-from cell to canopy and from 2D to 3D Prof. Kenji Omasa Professor of Graduate School of Agricultural and Life Sciences, the University of Tokyo, Japan 2014-0141 Proximal sensing of hidden plant parts using radar Prof. Peter Schulze Lammers Former President of EurAgEng, Rheinische Friedrich-Wilhelms-Universität Bonn, Germany 0826-901 Aerodynamic and energy engineering in agriculture Prof. In-Bok Lee Professor of Laboratory of Aero-Environmental & Energy Engineering (A3EL), Department of Rural Systems Engineering, College of Agricultural & Life Sciences, Seoul National University, Korea SEPTEMBER 17, 2014 WEDNESDAY MORNING 08:30-11:30 Small-scale Agricultural Mechanization Keynote Speeches Location: Room 302A, the 3rd Floor of CNCC Chair: Mr. Yoshisuke Kishida, Vice President of AAAE, President of Shin-Norinsha Co., Ltd., Japan Time 08:30-09:00 09:00-09:30 210 Paper # Technical Presentations 0826-902 Agriculture mechanization in Korea Prof. Sang Hun Kim President of the Korean Society for Agricultural Machinery and Professor of Department of Biosystems Engineering, Kangwon National University, Korea 0826-903 Agricultural mechanization in the Asia: status and issues Dr. Peeyush Soni Vice President of AAAE and Associate Professor at Asian Institute of Technology, Thailand Small-scale Agricultural Mechanization Oral Presentations Location: Room 302A, the 3rd Floor of CNCC Chair: Mr. Yoshisuke Kishida, Vice President of AAAE, President of Shin-Norinsha Co., Ltd., Japan Time 09:30-09:45 09:45-10:00 Paper # Technical Presentations 2014-1131 A sensor-based light trap system for an early warning system in pest surveillance Dr. Chan Chee Wan Malaysian Agricultural Research and Development Institute, Malaysia 2014-0247 Design and test of the garlic seed sequencing vibration machine Dr. Zhaolei Zhang Mechanical and Electronic Engineering College, Shandong Agricultural University, China 10:00-10:15 Tea Break Location: Room 302A, the 3rd Floor of CNCC Moderator: Dr. Peeyush Soni, Vice President of AAAE and Associate Professor at Asian Institute of Technology, Thailand Time 10:15-10:30 10:30-10:45 10:45-11:00 Paper # Technical Presentations 2014-0815 Research on gas-liquid two-phase flow characteristics during self-priming process of the pump Dr. Hong Li Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, China 2014-0198 Cloud service platform of agricultural machinery socialization and its business realization Dr. Jiayi Huang Guangzhou Jiankun Network Technology Develoment Co. Ltd., Guangzhou, China 0523-003 Production of reactive oxygen species by collapsing nanobubbles as a reason of seed germination promotion Prof. Shu Liu Graduate School of Agricultural & Life Sciences, the University of Tokyo, Japan 211 Evaluation of digestibility of cooked rice grain using in vitro digestion 11:00-11:15 2014-0202 technique Prof. Ogawa Yukiharu Graduate School of Horticulture, Chiba University, Japan 11:15-11:30 2014-1007 Signal detection of colorimetric sensor array based on hyperspectral imaging technique Prof. Zou Xiaobo School of Food and Biological Engineering, Jiangsu University, Zhenjiang, China AAAE 25TH EXECUTIVE COUNCIL MEETING SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 13:30-15:00 Location: Room 302A, the 3rd Floor of CNCC Moderator: Prof. Lanfang Zhang, Secretary General of AAAE 15:00-15:15 Tea Break AAAE 25TH ANNIVERSARY CELEBRATION (ASIA SUMMIT) SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 15:15-16:50 Location: Room 302A, the 3rd Floor of CNCC Chair: Prof. Gajendra Singh, Founding President of AAAE, Professor of Indian Agricultural research Institute (IARI), India 212 15:15-15:30 Remarks by Prof. Gajendra Singh, Founding President of AAAE 15:30-15:40 Address by the representative of CIGR 15:40-15:50 Address by the representative from ASABE 15:50-16:05 Address by the representative from Republic of Korea 16:05-16:15 Remarks by Prof. Vilas M. Salokhe, President of AAAE 16:15-16:50 Free discussion on the future development of AAAE CLOSING CEREMONY OF SESSION IX ASIA FORUM SEPTEMBER 17, 2014 WEDNESDAY AFTERNOON 16:50-17:00 Location: Room 302A, the 3rd Floor of CNCC Chair: Prof. Gajendra Singh 16:50-17:00 Closing address by Prof. Vilas M. Salokhe, President of AAAE (2014-2015), Vice Chancellor of Kaziranga University, India. 213 SESSION IX POSTER SESSIONS SEPTEMBER 17, WEDNESDAY 08:30 - 12:00 Topic (1) No. 128 129 Poster # 91-001 91-002 Paper # Paper Titles Name & Institution Country 0618-093 The Ratio of Transpiration to Evapotranspiration for Maize under Dryland Farming Conditions in Loess Plateau of China Zhou Shanshan College of natural resources and environment, Northwest A&F University, Yangling, Shaanxi China China 2014-0837 Simulation Analysis and Experiment Research for Gearlinkage-cam Combination Planting Mechanism Hu Jianping Key Laboratory of Modern Agricultural Equipment and Technology,Ministry of Education ,Jiangsu University China Topic (2) No. 130 131 Poster # 92-001 92-002 132 Poster # 93-001 Paper Titles Name & Institution Country 2014-0861 Effect of Gamma Irradiation on Microbiological and Two Main Phospholipids of Four Different Meats Chen Si School of Food Science and Biotechnology, Zhejiang Gongshang University China 2014-0937 Research and Application on Modular Design of Potato Cleaning, Classification and Storage Machinery Equipment Gao Bo, MENOBLE co., LTD Beijing, 100083, China China Information Communication Technology in Agriculture Paper # Paper Titles Name & Institution Country 2014-1007 Signal Detection of Colorimetric Sensor Array Based on Hyperspectral Imaging Technique LI Zhi-Hua School of Food and Biological Engineering, Jiangsu university China Topic (4) No. 133 214 Poster # 94-001 Farm Machinery and Power Paper # Topic (3) No. Postharvest and Biotechnology Energy, Environment and Emerging Technologies Paper # Paper Titles Name & Institution Country 2014-1467 Experiments and Research of Related Parameters in WheatStraw Painting Liu Pingyi College of Engineering, China Agricultural University China TECHNICAL TOURS TECHNICAL TOURS OF THE 18TH WORLD CONGRESS OF CIGR All tours start from C1 Access of Convention area, CNCC, please note that the starting time is different. Each tour includes: technical tour and lunch. Tour site 1: Chateau Changyu AFIP Global Beijing Itinerary 08:00 Set off from C1 Access of Convention area, CNCC 10:00 Arrive at Chateau Changyu AFIP Global Beijing 10:00-12:00 Visiting 12:00-13:00 Lunch, KFC one-person package 13:00-15:00 Back to CNCC The tour will include the followings: (1) Changyu Wine Culture Museum (2) European style underground wine cellar (3) World-class wine production facilities (4) Tasting Center (5) Vineyard at Changyu (6) European style village Route: CNCC→Jingcheng Expressway 17th Exit (at Mujiayu Toll Station, in East Miyun County) and turning left for 300 m, about 2 hours’ drive Tour duration: 7 hours including visiting and driving to the site Tour site 2: China Mengniu Dairy (Beijing) Co. Ltd. Itinerary 08:30 10:00 10:00-11:30 Set off from C1 Access of Convention area, CNCC Arrive at China Mengniu Dairy (Beijing) Co. Ltd. Visiting 215 11:30-12:30 Mengniu Staff Canteen, working lunch 12:30-14:00 Back to CNCC The tour will include the followings: (1) Mengniu Dairy Production and Sale Network in China (2) Modernized yoghurt and milk production lines (3) Normal temperature storehouse (4) Enterprise culture, history and management mode (5) Mengniu products exhibition and modernized working district Route: CNCC→Jingtong Expressway→Baliqiao Toll Station→Jingjin Road→Wuxing Road and turning left at Gantang→Gantang Bridge →Lucheng Middle Road, about 1.5 hours’ drive Tour duration: 5.5 hours including visiting and driving to the site Tour site 3: Xiaotangshan Fruits and Vegetables Exhibition Center Itinerary 09:00 Set off from C1 Access of Convention area, CNCC 10:00 Arrive at Xiaotangshan Fruits and Vegetables Exhibition Center 10:00-11:30 Visiting 11:30-12:30 Canteen of Training Center at the Exhibition Center, buffet dinner 12:30-13:30 Back to CNCC The tour will include the followings: (1) Modernized greenhouse planting of cucumbers, cherries and tomatoes (2) Modernized greenhouse planting and picking of bananas and papayas (3) Seedling (4) Flowers planting (5) Vegetable planting, small-package vegetable grading, handling and packaging technologies Route: CNCC→Jingzang Expressway (Badaling Expressway)→6th North Ring Road (to Shunyi for 12 km eastward)→Off expressway at Xiaotangshan Toll Station at Beiyuan→Turning right at 1st traffic light→Turning left for 1.5 km at 2nd traffic light, about 1 hour’s drive Tour duration: 4.5 hours including visiting and driving to the site Tour site 4: Beijing DQY Agriculture Technology Co., Ltd. Itinerary 08:00 10:00 10:00-11:30 11:30-13:00 13:00-15:00 216 Set off from C1 Access of Convention area, CNCC Arrive at Beijing DQY Agriculture Technology Co., Ltd. Visiting Origus, buffet dinner (by the same bus) Back to CNCC The tour will include the followings: (1) Ecological farm exhibition hall (2) Shell egg processing (3) Liquid egg processing (4) Large-scale methane project (5) Bio-natural gas project Route: CNCC→Jingzang Expressway (Badaling Expressway)→Kangzhuang Exit→Driving northwards alongside the road (in direction of Zhangshanying town government) for about 15 km, about 2 hours’ drive Tour duration: 7 hours including visiting and driving to the site 217 218 219 220 221 222 223 224 THE 18TH WORLD CONGRESS OF CIGR NAME LIST OF THE PARTICIPANTS 225 Name List of Participants No. Name 1 A.M. Mustafa Zhejiang University, Hangzhou, Zhejiang, China ahmedmostafa050@yahoo. com 2 Abdul Qaisrani Department of Agriculture, Australia [email protected]. au 3 Abhijit Borah Department of Agricultural Engineering, Assam Agricultural University, Assam, India [email protected] 4 Abhisesh Silwal Washington State University, USA [email protected] 5 Ahmad Fiaz College of Engineering, Nanjing Agricultural University, China [email protected] 6 Aijie Yuan Chinese Society for Agricultural Machinery, China [email protected] 7 Aijun Zhang Hebei Agricultural University, Baoding, Hebei, China [email protected] 8 Akindele Folarin Alonge University of Uyo, Nigeria [email protected]. ng 9 Akinnawo Ebenezer Indepth Harvest Awareness (IDHA), Gambia [email protected] 10 Alaa El-Din A. Bekhit AlSaid University of Otago, New Zealand [email protected] 11 Alagha Samuel Adelanke Rufus Giwa Polytechnic, Owo, Nigeria [email protected] 12 Alexander Jan Schmithausen Institute of Agricultural Engineering, Germany [email protected] 13 Allen Jack McHugh University of Southern Queensland, Australia [email protected] 14 Amadou Keita International Institute for Water and Environmental Engineering, USA [email protected] 15 Anders Leegaard Riis Pig Research Centre, Danish Agriculture & Food Council, Copenhagen, Denmark [email protected] 16 Andi Dirpan Rusdin Ehime University, Indonesia [email protected] 17 Andrew Barry Ecole Polytechnique Fédérale de Lausanne (EPFL), Chile [email protected] 18 Anja Graeff TU Muenchen Weihenstephan, Germany [email protected] 19 Anjun Mei Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 20 Anning Li Center for Agricultural Mechanization Technology Development and Extension, Beijing, China [email protected] 21 Ao Zhang Department of Research and Projects, Hi-Target Survey Instruments Company Ltd., Guangzhou, Guangdong, China [email protected] 22 Aolin Yao Jilin University, Changchun, Jilin, China [email protected] 23 Arturo Chong Eslava Universidad Autónoma Chapingo, Mexico [email protected] 226 Affiliation Email 24 Axel Munack Thuenen Institute of Agricultural, Germany [email protected] 25 Babatope Albert Alabadan Federal University, Oye-Ekiti, Nigeria babatope.alabadan@fuoye. edu.ng 26 Baijing Qiu Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 27 Bangbang Zhang College of Resource and Environmental Sciences, China Agricultural University, Beijing, China [email protected] 28 Baofeng Su Northwest A&F University, Yangling, Shaanxi, China [email protected] 29 Baofeng Zhang Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 30 Baohua Kong Northeast Agricultural University, Harbin, Heilongjiang, China [email protected] 31 Baoming Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 32 Baoxia Sun College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 33 Barbari Matteo University of Florence-Dept., GESAAF, Italy [email protected] 34 Bashar Mehrez South China Agricultural University, Guangzhou, China [email protected] 35 Bdalla Noureldin Osman A China Agricultural University, Beijing, China [email protected] 36 Bei Wang School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 37 Bencheng Sheng Kubota China Holdings Co., Ltd., Shanghai, China bencheng.sheng@kubota. com 38 Bengang Wu School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 39 Benhua Zhang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 40 Bernhardt Heinz Agricultural System Engineering Technische Universität München, Munic, Germany [email protected]. de 41 Bill Stout Past President of CIGR, USA [email protected] 42 Bin Li Inner Mongolia Academy of Agricultural and Animal Husbandry Sciences, Hohhot, Inner Mongolia, China [email protected] 43 Bin Wang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 44 Bing Xia Water Conservancy and Energy Dynamics Engineering College, Yangzhou University, Yangzhou, Jiangsu, China [email protected] 45 Bing Zhao UNESCAP/CSAM 46 Bingnan Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 47 Bo Jiang Research center of fluid machinery engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 227 48 Bo Jin Zhejiang University [email protected] 49 Bo Ling College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 50 Bo Wu Jilin University/Changchun Institute of Technology, Changchun, Jilin, China [email protected] 51 Bo Xu College of Engineering, China Agricultural University, Beijing, China [email protected] 52 Bo Zhang College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 53 Bo Zhou College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 54 Bolin Shi Sub-Institute of Food and Agriculture, China National Institute of Standardization, Beijing, China [email protected] 55 Boren Fan Jiangsu Bureau of Agricultural Mechanization Management, China [email protected] 56 Bowen Zhao Inner Mongolia Hua De New Technology Limited Company, Hohhot, Inner Mongolia [email protected] 57 Bronson Kevin USDA-ARS, USA [email protected] 58 Caglayan Nuri Dept. of Agricultural Machinery, Turkey [email protected] 59 Caicong Wu College of Information and Electrical Engineering, Beijing University, Beijing, China [email protected] 60 Cailing Liu China Agricultural University, Beijing, China [email protected] 61 Can Ertekin Department of Farm Machinery, Faculty of Agricultural Engineering, Akdeniz University, Antalya, Turkey [email protected] 62 Cascone Giovanni University of Catania, Italy [email protected] 63 Casey Kenneth Texas A&M Agri. Life Research, USA [email protected] 64 Ceren Tülek Ege University, Turkey [email protected] 65 Changfeng Jiao College of Economics and Management, China Agricultural University, Beijing, China [email protected] 66 Changfu Tong Institute of Water Resources Sciences in Pastoral Areas, Ministry of Water Resources of PRC, Hohhot, Inner Mongolia, China [email protected] 67 Changhua Liu Hubei Bureau of Agricultural Mechanization Management, China [email protected] 68 ChangHua Lu Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China [email protected] 69 Changhua Ma Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 70 Changran He Beijing Information Science and Technology University, Beijing, China [email protected] 71 Changyong Shao College of Engineering, China Agricultural University, Beijing, China [email protected] 228 College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] Zhejiang University, Hangzhou, Zhejiang, China [email protected] Chanli Hu College of Electrical and Information, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 75 Chan-Seok Ryu Gyeongsang National University, Republic of Korea [email protected] 76 Chao Ma China Agricultural University, Beijing, China [email protected] 77 Chao Zheng College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 78 Chaohui Feng University College Dublin, Ireland [email protected] 79 Chaohui Hao Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected] 80 Chaojie Cai Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 81 Chaoyong Cai Zhejiang Bureau of Agricultural Mechanization Management, China [email protected] 82 Chee Wan Chan Malaysian Agricultural Research and Development Institute, Malaysia [email protected] 83 Chen Chen Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China [email protected] 84 Chen Di College of Engineering, China Agricultural University, Beijing, China [email protected] 85 Chen Sun Institute of Environment and Sustainable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China [email protected] 86 Chen Tang Zhejiang University, Hangzhou, Zhejiang, China [email protected] 87 Chen Zhang Sino-European Institute of Aviation Engineering, Tianjin, China [email protected] 88 Chen-ang Lv School of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 89 Chenchen Cao Dalian Ocean University, Dalian, Liaoning, China [email protected] 90 Cheng Shen Nanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 91 Chengchun Zhang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 92 Chenggao Xu Guizhou Committee of Agriculture, Guizhou, China [email protected] 93 Chengtao Wang Beijing Technology and Business University, Beijing, China [email protected] 94 Chengxu Lv China Agricultural University, Beijing, China [email protected] 95 Chenhu Xu Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 72 Changyuan Zhai 73 Chanjun Sun 74 229 96 Chenxi Zhao Northeast Agricultural University, Harbin, Heilongjiang, China [email protected] 97 Chenxian Yang College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected] 98 Chi Zhang China Agricultural University, Beijing, China [email protected] 99 Chu Gao Water Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 100 Chu Zhang College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 101 Chuanmin Yang College of Mechanical Engineering, Tianjing University of Commerce, Tianjin, China [email protected] 102 Chuanyang Zhang College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an, Shandong, China [email protected] 103 Chuanyuan Zhao College of Mechanical Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 104 Chukai Chen Office of Agricultural Mechanization, Department of Agriculture of Guangdong, China [email protected] 105 Chun Wang Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China [email protected] 106 Chunguang Wang Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 107 Chunjiang Zhao National Engineering Research Center for Information Technology in Agriculture, Beijing, China [email protected] 108 Chunlin Xu Harbin Academy of Agricultural Sciences, Harbin, Heilongjiang, China [email protected] 109 Chunsong Guan Nanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 110 Chunxia Jiang Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 111 Chunxia Liu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 112 Claudio García National Research Institute of Agriculture, Uruguay [email protected] 113 Claus Grøn Sørensen Aarhus University, Denmark clausaagegronsoerensen@ gmail.com 114 Cong Chen Nanjing Research Institute for Agricultural Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 115 Cuihong Liu College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 116 Cuiling Li College of Engineering, China Agricultural University, Beijing, China [email protected] 117 Cungui He Shaanxi Bureau of Agricultural Mechanization Management, China [email protected] 230 118 Cunkun Chen 119 D. S. Balachandra 120 Dachun Qin 121 Dae-hyun Jung 122 Daniel Berckmans 123 National Center for Agro-products Preservation Engineering and Technology, Tianjin, China [email protected] Indian Society of Agricultural Engineers, India balachandra.babu@gmail. com Office of Agricultural Machinery, Chongqing Committee of Agriculture, Chongqing, China Seoul National University, Republic of Korea [email protected] KU Leuven, Belgium Daniel.Berckmans@biw. kuleuven.be Daniella Jorgede Moura State University of Campinas, Brazil daniella.moura@feagri. 124 Danyang Wang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 125 Daobing Chen College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 126 Daoliang Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 127 Daolin Zhang College of Agricultural Engineering and Food Sciences, Shandong University of Technology, Zibo, Shandong, China [email protected] 128 Dariush Zare Shiraz University, Iran [email protected] 129 Dariush Zare Shiraz University, Iran [email protected] 130 Darrin John Drollinger American Society of Agricultural and Biological Engineers, USA [email protected] 131 David Wilson Purdue University, USA [email protected] 132 Dawei Gao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 133 Da-Wen Sun Agriculture & Food Science Centre, University College Dublin, Ireland [email protected] 134 De Gao N i n g b o I n s t i t u t e o f Te c h n o l o g y, Z h e j i a n g University, Ningbo, Zhejiang, China [email protected] 135 De Tian North China Electric Power University, Beijing, China [email protected] 136 Dean Zhao Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 137 Dechang Yang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 138 Dehua Wu Anhui Huaifeng Modern Agricultural Equipment Ltd. Co. [email protected] 139 Dejian Zhang Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China [email protected] 140 Dejun Chen Jinhua Vocation and Technology Institute, Jinhua, Zhejiang, China [email protected] Deke Xing Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education & Jiangsu Province, Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 141 231 142 Dengwei Wang Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 143 Dennis Johannes W. Snoek Wageningen University, the Netherlands [email protected] 144 Dexia Chi Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 145 Dezhao Liu Aarhus University, Denmark [email protected] 146 Dianlong Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 147 Dong Hu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 148 Dong Wang College of Engineering, China Agricultural University, Beijing, China [email protected] 149 Dongdong Du College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 150 Donghong Liu Zhejiang University, Hangzhou, Zhejiang, China [email protected] 151 Dongwei Wang Qingdao Agricultural University, Qingdao, Shandong, China [email protected] 152 Dongxing Zhang College of Engineering, China Agricultural University, Beijing, China [email protected] 153 Douglas J. Reinemann University of Wisconsin-Madison, USA [email protected] 154 Du Chen China Agricultural University, Beijing, China [email protected] 155 Earl Vories USDA-ARS, USA [email protected] 156 Elfriede OfnerSchroeck LFZ Raumberg-Gumpenstein, Austria elfriede.ofner-schroeck@lfz. or.at 157 Enchen jiang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 158 Endita Prima Ari Pratiwi Laboratory of Irrigation and Water Management, Department of Agro-Environmental Sciences, Faculty of Agriculture, Kyushu University, Japan [email protected] 159 Enkhbayar Gonchigdorj MSUA, Mongolia [email protected] 160 Enrique Palacios Colegio de Postgraduados, Mexico [email protected] 161 Enrong Mao College of Engineering, China Agricultural University, Beijing, China [email protected] 162 Eric B. Smith USA [email protected] 163 Erkan Dikmen Dikmen Dept. of Energy Systems Engineering, Fac. of Technology, Süleyman Demirel Univ., Turkey [email protected] 164 Evelia Schettini University of Bari, Italy [email protected] 165 Fabian Sellmann University of Applied Science Osnabrueck, Germany f.sellmann@hs-osnabrueck. de 232 166 Fang Lu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 167 Fang Tian College of Engineering, China Agricultural University, Beijing, China [email protected] 168 Fang Xie China Agricultural University, Beijing, China [email protected] 169 Fang Zhang Institute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology, Xi'an, Shaanxi, China [email protected] 170 Fangkai Ma Department of Planning, Changjiang Institute of Survey, Planning, Design and Research, Wuhan, Hubei, China [email protected] 171 Fangxia Pei Lanzhou University of Technology, Lanzhou, Gansu, China [email protected] 172 Fangyuan Ao Chongqing Center for Agricultural Mechanization Te c h n o l o g y D e v e l o p m e n t a n d E x t e n s i o n , Chongqing, China [email protected] 173 Fanyu Qi College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 174 Fayose Folasayo Tshwane University of Technology, South Africa [email protected] 175 Fedro S. Zazueta Office of Academic Technology, University of Florida, USA [email protected] 176 Fei Liu College of Mechanical Engineering, Inner Mongolia University, Hohhot, Inner Mongolia, China [email protected] 177 Fei Liu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 178 Feifei Tao College of Engineering, China Agricultural University, Beijing, China [email protected] 179 Feiyu Ma College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 180 Fen He Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 181 Fen Liao Institute of Agro-products Processing, Guangxi Academy of Agricultural Sciences, Nanning, Guangxi, China [email protected] 182 Feng Kang Beijing Forestry University, Beijing, China [email protected] 183 Feng Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 184 Feng Lv College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 185 Fengkun Sun College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 186 Fengle Zhu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 233 187 Fengxian Gao College of Animal Science and Technology, Hunan Agricultural University, Changsha, Hunan, China [email protected] 188 Firat Komekci Department of Agricultural Machinery, Agricultural Faculty, Ege University, Turkey [email protected] 189 Francis Kumi University of Cape Coast, Ghana [email protected] 190 Frauke P. C. Müller Institute of Agricultural Engineering, Germany [email protected] 191 Frederik Langsenkamp University of Applied Science Osnabrueck, Germany [email protected] 192 Fugui Zhang College of Mechanical Engineering, Guizhou University, Guiyang, Guizhou, China [email protected] 193 Fuping Hao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 194 Fuqiang Li College of Engineering, China Agricultural University, Beijing, China [email protected] 195 Fuxing Zou College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 196 Fuyang Tian College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an, Shandong, China [email protected] 197 Fuzeng Yang College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 198 Gaixia Zhai Hohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China [email protected] 199 Gajendra Singh Indian Agricultural Research Institute(IARI), India [email protected] 200 Gang Liu College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 201 Gang Wang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 202 Gang Zhao School of Mechatronics and Engineering, Harbin Engineering University, Harbin, Heilongjiang, China [email protected] 203 Gaofeng Zhou College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 204 Gaohong Yu College of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China [email protected] 205 Ge Ye Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 206 Gerard P.A. Bot Wageningen University, the Netherlands [email protected] 207 Gerasimos Martzopoulos Aristotle University of Thessaloniki, Greece [email protected] 208 Gerd-Christian Maack University of Bonn, Germany [email protected] 234 209 Gerrit J. Carsjens Wageningen University, the Netherlands [email protected] 210 Gerrit van Straten Wageningen University, the Netherlands [email protected] 211 Giuliano Vox Department of Agricultural and Environmental Science DISAAT, University of Bari, Italy [email protected] 212 Guangnan Chen University of Southern Queensland, Australia [email protected] 213 Guangqun Huang College of Engineering, China Agricultural University, Beijing, China [email protected] 214 Guangsheng Yang College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected] 215 Guangwei Wu Department of Precision Agriculture, National Engineering Research Center for Information Technologies in Agriculture, China [email protected] 216 Guangyou Yang Hubei University of Technology, Wuhan, Hubei, China [email protected] 217 Guangzhong Luan College of Food Science and Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 218 Guanhua Huang China Agricultural University, Beijing, China [email protected] 219 Guanting Pan College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 220 Guanyu Shang Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China [email protected] 221 Guanze He Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 222 Guifang Fan Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, China [email protected] 223 Guiju Fan Shandong Agricultural University, Tai'an, Shandong, China [email protected] 224 Guilin Liu Hohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China [email protected] 225 Guimin Wang Foton Lovol International Heavy Industry Co., Ltd. YTO Group, China [email protected] 226 Guisheng Geng Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 227 Guo Zhai Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 228 Guochao Bu Beijing Forestry University, Beijing, China [email protected] 229 Guolin Li Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected] 230 Guoqiang Zhang Aarhus University, Denmark [email protected] 231 Guotian Hu College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 235 232 Guoxin Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 233 Guoyang Yuan College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 234 H. Emre Akman Akdeniz University, Turkey [email protected] 235 Hai Wang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 236 Haichao Song College of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China [email protected] 237 Haifeng Lu China Agricultural University, Beijing, China [email protected] 238 Haihua Wang China Agricultural University, Beijing, China [email protected] 239 Haihua Wu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 240 Hailiang Zhang College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 241 Haina Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 242 Haiwei Ren Department of Food Science and Engineering, Lanzhou University of Technology, Lanzhou, Gansu, China [email protected] 243 Haiyan Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 244 Haiyang Yu Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 245 Haiye Yu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 246 Hakjin Kim Seoul National University, Republic of Korea [email protected] 247 Hamelin Lorie University of Southern Denmark, Canada [email protected] 248 Han Bao Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 249 Han Huang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 250 Han Pan China Agricultural University, Beijing, China [email protected] 251 Han Shufeng John Deere, USA HanShufeng@JohnDeere. com 252 Hannah Licharz University of Bonn, Germany [email protected] 253 Hanping Mao Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 254 Hans von Wachenfelt Swedish University of Agricultural Science, Germany [email protected] 255 Hanyue Zhang Institute of Modern Agricultural Equipment of Guangdong, China 236 256 Hao Chun Liu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 257 Hao Zhang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 258 Haopeng Liu College of Engineering & Technology, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 259 Haoran Mei Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 260 Hasan Yilmaz Akdeniz University, Faculty of Agriculture, Turkey [email protected] 261 Hassanien Reda College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 262 Hassouna Mélynda INRA, France melynda.hassouna@rennes. 263 Hatem Mohamed Faculty of Agriculture, Cairo University, Egypt [email protected] 264 He Wang Key Laboratory of Networked Control System, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, Liaoning, China [email protected] 265 Helena Jungbluth Kerstin University of Hohenheim, Germany [email protected] 266 Heling Zhang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 267 Henan Zhang Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 268 Heng Li Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China [email protected] 269 Heping Zhu USDA-ARSATRU, USA [email protected] 270 Hermann Auernhammer Munich University of Technology, Germany [email protected] 271 Hermann Garbers German Engineering Federation - Agricultural Machinery Division, Germany [email protected] 272 Hiroshi Shimizu Kyoto University, Japan [email protected] 273 Hong Cao Institute of Agricultural Economics and Information, Nanjing, Jiangsu, China [email protected] 274 Hong Cheng Jilin Bureau of Agriculture, China [email protected] 275 Hong Liu Hainan Normal University [email protected] 276 Hong Zhang Zhejiang Gongshang University, Hangzhou, Zhejiang, China [email protected]. edu.cn 277 Hongbin Cong Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 278 Hongbin Pu South China University of Technology, Guangzhou, China [email protected] 279 Hongfang Yuan College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 280 Hongguo Cao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 237 281 Hongju He University College Dublin, Ireland [email protected] 282 Honglei Jia College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 283 Hongli Wang Jilin University, Changchun, Jilin, China [email protected] 284 Hongliang Cao College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]. edu.cn 285 Hongping Zhou College of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China [email protected] 286 Hongwen Li College of Engineering, China Agricultural University, Beijing, China [email protected] 287 Hongxin Wu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 288 Hongyan Gao Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 289 Hongyin Jiang Anhui Bureau of Agricultural Mechanization Sciences, China [email protected] 290 Hongyu Liu Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 291 Hongyu Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 292 Hongyu Yan Jilin Academy of Agricultural Mechanization Sciences, Changchun, Jilin, China [email protected] 293 Hongzhou Lei College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 294 Hua Li College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 295 Hua Wang Chinese Academy of Engineering, Beijing, China [email protected] 296 Hua Zhang Anhui Science and Technology University, Fengyang, Anhui, China [email protected] 297 Hualu Song College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an, Shandong, China [email protected] 298 Huangzhen Lv Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 299 Hubiao Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 300 Hui Guo College of Mechanical and Traffic, Xinjiang Agricultural University, Urumqi, Xinjiang, China [email protected] 301 Hui Wang Chinese Academy of Agricultural Mechanization Sciences [email protected] 302 Hui Zhang Zhejiang University, Hangzhou, Zhejiang, China [email protected] 303 Hui Zhao Tianjing University of Science and Technology, Tianjin, China [email protected] 304 Huichun Ye College of Resource and Environmental Sciences, China Agricultural University, Beijing, China [email protected] 238 305 Huimin Fang Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 306 Huimin Feng College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 307 Huixia Wang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 308 Ibrahim Saleh MacDon Industries Ltd., Canada [email protected] 309 Ibraimo Teleha Chabite College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 310 Ikko Ihara Kobe University, Japan [email protected] 311 In-Bok Lee Seoul National University, Republic of Korea [email protected] 312 Isabel Maria Duarte Escola Superior Agrária de Coimbra, Portugal [email protected] 313 Ivan Svec Institute of Chemical Technology in Prague, Czech Republic [email protected] 314 Jan Häbler Institute of Agricultural and Urban Ecological, Berlin Humboldt University, Germany [email protected]. de 315 Jan Maxa Institute for Agricultural Engineering and Animal Husbandry, Bavarian State Research Centre for Agriculture, Germany [email protected] 316 Jana Galambosova Slovak University of Agriculture in Nitra, Slovakia [email protected] 317 Janusz Piechocki University of Warmia and Mazuryin Olsztyn, The Netherlands [email protected] 318 Jaw-Kai Wang Jawkai Bioengineering R&D Center, Shenzhen, China [email protected] 319 Jean-Christophe Rousseau Berthoud, France [email protected] 320 Jerzy Weres Poznan University of Life Sciences, the Netherlands [email protected] 321 Ji Du College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 322 Ji Zhang College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an, Shandong, China langmanmanwu789@163. com 323 Jia Chen College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 324 Jia Huang Guangzhou Jiankun Network and Technology Development Co. Ltd. [email protected] 325 Jia Zhang Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 326 Jia Zhao N i n g b o I n s t i t u t e o f Te c h n o l o g y, Z h e j i a n g University, Ningbo, Zhejiang, China [email protected] 327 Jiabo Zhan Shandong Bureau of Agricultural Mechanization Management, China [email protected] 239 328 Jiachen Ren College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 329 Jiale Zhao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 330 Jiaming Li China Agricultural University, Beijing, China [email protected] 331 Jian Chen College of Engineering Technology, Southwest University, Chongqing, China [email protected] 332 Jian Chen Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China [email protected] 333 Jian Jin Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 334 Jian Li College of Food Engineering, Harbin University of Commerce, Harbin, Heilongjiang, China [email protected] 335 Jian Li Beijing Technology and Business University, Beijing, China [email protected] 336 Jian Pan School of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 337 Jian Xu Ningbo University, Ningbo, Zhejiang, China [email protected] 338 Jian Yu Water Resources Research Institute of Inner Mongolia, Hohhot City Inner Mongolia, China 339 Jian Zhuang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 340 Jianbo Di College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 341 Jianfen Liang College of Food Science and Nutritional Engineering, China Agricultural Engineering, Beijing, China [email protected] 342 Jianfeng Sun College of Food Science and Technology, Agricultural University of Hebei, Baoding, Hebei, China [email protected] 343 Jianfeng Zhou Washington State University, USA [email protected] 344 Jiang Xu College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an, Shandong, China [email protected] 345 Jiangchang Li College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected] 346 Jiangtao Qi Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 347 Jianhan Lin Key Laboratory of Agri-Information, Ministry of Agriculture, P. R. China [email protected] 348 Jianjun Du Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 349 Jianjun Yin Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 240 350 Jianjun Zhao College of Engineering, China Agricultural University, Beijing, China [email protected] 351 Jianlong Zhou Bureau of Agricultural Mechanization Management, Agriculture Bureau of HeilongJiang Agricultural Reclamation Department, Heilongjiang, China [email protected] 352 Jianning Yuan Department of mechanical engineering, Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected] 353 Jiannong Xin University of Florida, Institute of Food and Agricultural Sciences, USA [email protected] 354 Jianping Hu Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu Province, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 355 Jianping Li Department of agricultural mechanization, College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected] 356 Jianping Li College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 357 Jianping Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 358 Jianqiao Li Jilin University, Changchun, Jilin, China [email protected] 359 Jiantao Liu Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 360 Jianwen Lu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 361 Jianxi Zhu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 362 Jianxia Kuang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China sharon_kuang1989@163. com 363 Jianxu Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 364 Jianzhu Zhao College of Engineering, China Agricultural University, Beijing, China [email protected] 365 Jiao Wang China Agricultural University, Beijing, China [email protected] 366 Jiaoyang Pu School of Water Resources and Environment, China University of Geosciences, Beijing, China [email protected] 367 Jiasheng Wang College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao, Shandong, China [email protected] 368 Jiaxing Xie South China Agricultural University [email protected] 369 Jichun Ma Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected] 370 Jie Li Sichuan Research & Design Institute of Agricultural Machinery, Chengdu, Sichuan, China [email protected] 241 371 Jie Liu College of Engineering, China Agricultural University, Beijing, China [email protected] 372 Jie Wen China Institute of Water Resources and Hydropower Research, Beijing, China 373 Jieqiang Zhuo Beijing Agricultural Machinery Institute, Beijing, China [email protected] 374 Jihe Cai Changzhou Institute of Technology, Changzhou, Jiangsu, China [email protected] 375 Jin He College of Engineering, China Agricultural University, Beijing, China [email protected] 376 Jin Tang Jilin University, Changchun, Jilin, China [email protected] 377 Jin Tong College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 378 Jin Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 379 Jin Zhao College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected] 380 Jinbing Hu Zhejiang University, Hangzhou, Zhejiang, China [email protected] 381 Jinfu Wang Chery Heavy Industry Co., Ltd, China [email protected] 382 Jing Gan China Agricultural University, Beijing, China [email protected] 383 Jing Guo College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 384 Jing Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 385 Jing Lin College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning China [email protected] 386 Jing Liu Guizhou Institute of Mountain Agricultural Mechanization, China [email protected] 387 Jing Sun Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 388 Jing Zhao College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 389 Jingguang Qin Chinese Society for Agricultural Engineering, China [email protected] 390 Jinghui Xu College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 391 Jingjing Zhang College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 392 Jingliang Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 393 Jinguang Zhu Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China [email protected] 242 394 Jinguo Zhang Department of agricultural mechanization, College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected] 395 Jingxu Wang College of Engineering, China Agricultural University, Beijing, China WJXWJXWJX.good@163. com 396 Jingyun Zhang Henan University of Technology, Zhengzhou, Henan, China zhangjingyun6832@163. com 397 Jinhui Zhao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 398 Jinhui Zhou College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 399 Jinjiang Zhang Guangdong Agri-machinery Research Institute, Guangzhou, Guangdong, China [email protected] 400 Jinkun Pan Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected] 401 Jinling Cong College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected] 402 Jiqin Ni Purdue University, USA [email protected] 403 Jirka Simunek University of California – Riverside, Czech Republic [email protected] 404 Jirui Du College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 405 Jiulin Sun Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing, China [email protected] 406 Jiyu Peng College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 407 Jiyuan Liu Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected] 408 Jiyue Li Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 409 Jizhan Liu Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 410 Jizhang Wang Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 411 Joachim Mueller Universitaet Hohenheim, Germany joachim.mueller2304@web. de 412 Jocelyn Guertin Quebec City Convention Centre, Canada [email protected] 413 Joergensen Malene Danish Agriculture and Food Council, Denmark [email protected] 414 John Kenneth Schueller University of Florida, USA [email protected] 415 John Obiero University of Venda, Kenya [email protected] 416 John Reid John Deere, USA [email protected] 243 Guelph Food Research Center, Agriculture and Agri-Food Canada, Canada [email protected] Gadjah Mada University, Indonesia [email protected] Seoul National University, Republic of Korea [email protected] Department of Biosystems Engineering, Seoul National University, Republic of Korea [email protected] Jose Manuel Goncalves College of Agriculture of Coimbra, Portugal [email protected] 422 José Miguel Aguilera CONICYT, Chile [email protected] 423 Josef Kienzle A g r o - I n d u s t r y O ff i c e r, I n f r a s t r u c t u r e a n d Engineering Services Unit, Rural Infrastructure and Agro-Industries Division, FAO 424 Joseph Davidson Washington State University-TriCities, USA joseph.ryan.davidson@ gmail.com 425 Joseph Zulovich University of Missouri, USA [email protected] 426 Jozef Grochowicz University of Vincent Pol, The Netherlands [email protected] 427 Juan Zhao College of Engineering, China Agricultural University, Beijing, China [email protected] 428 Julian Francis Vincent International Society of Bionic Engineering, UK [email protected] 429 Jumin Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]. edu.cn 430 Jun Bao Northeast Agricultural University, Harbin, Heilongjiang, China [email protected] 431 Jun Cui Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 432 Jun Fu Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 433 Jun Gao Kunming University of Science and Technology, Kunming, Yunnan, China [email protected] 434 Jun Hu College of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China [email protected] 435 Jun Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 436 Jun Sun Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 437 Jun Wang College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 438 Jun Wang Jilin University, Changchun, Jilin, China [email protected] 439 Jun Wei Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected] 417 John Shi 418 Joko Nugroho Wahyu Karyadi 419 Jongwoo Ha 420 Joon Yong Kim 421 244 440 Jun Zhang Institute of Soil and Water Conservation, Chinese Academy of Sciences,Ministry of Water Resources, Yangling, Shaanxi, China 1992zhangjun.love@163. com 441 Junan Liu China Agricultural University, Beijing, China [email protected] 442 Junfa Hao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 443 Junfa Wang College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected] 444 Junfeng Liu College of Mechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected] 445 Junfeng Zhang Wuhan Institute of Agricultural Mechanization Sciences, Wuhan, Hubei, China [email protected] 446 Jungang Wang Jiangxi Association for Agricultural Mechanization, China [email protected] 447 Junguo Liu School of Nature Conservation, Beijing Forestry University, Beijing, China [email protected] 448 Junhu Cheng School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China [email protected] 449 Junjie Xue China Agricultural University, Beijing, China [email protected] 450 Junmin Yang Yunnan Institute of Agricultural Mechanization Sciences, Yunnan, China [email protected] 451 Junming Hou College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 452 Junning Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 453 Junwei Cui Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected] 454 Juraj Maga Slovak University of Agriculture in Nitra,, Slovakia [email protected] 455 K.C. Ting University of Illinois at Urbana-Champaign, USA [email protected] 456 Kai Peng College of Engineering, China Agricultural University, Beijing, China [email protected] 457 Kaifeng Li MAE Northern Co. Ltd., Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 458 Kaixuan Zhao College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 459 Kang Tu Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 460 Kehinde Adedeji Adekola Jilin University, Nigeria [email protected] 461 Keming Du Institute of Environment and Sustainable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China [email protected] 462 Kenji Omasa The University of Tokyo, Japan [email protected]. ac.jp 245 463 Kenneth A. Sudduth USDA-ARS Cropping Systems and Water Quality Research Unit [email protected] 464 Keqiang Yu Zhejiang University, Hangzhou, Zhejiang, China [email protected] 465 Kerstin Jungbluth University of Bonn, Germany [email protected] 466 Khansawanh Sisopha Kyushu University, Japan [email protected] 467 Kotwaliwale Nachiket Central Institute of Agricultural Engineering, India [email protected] 468 Koungveng Taing Kyushu University, Japan [email protected] 469 Kuichuan Sheng Zhejiang University, Hangzhou, Zhejiang, China [email protected] 470 Kuishun Cui Heilongjiang Agricultural Machinery Repairing Institute, Harbin, Heilongjiang, China [email protected] 471 Kun Yu Syngenta Biotechnology (China) Co., Ltd., Beijing, China [email protected] 472 Kun Zhou University of Aarhus, Faculty of Science, Denmark [email protected] 473 Kundian Wang College of Engineering , Huazhong Agricultural University, Wuhan, Hubei, China [email protected]. cn 474 Kunpeng Xue College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 475 Kurpaska Slawomir Agricultural University in Kraków, The Netherlands [email protected] 476 Kyo Suh Seoul National University, Republic of Korea [email protected] 477 Kyosuke Yamamoto The University of Tokyo, Japan [email protected]. u-tokyo.ac.jp 478 Lalit R. Verma American Society of Agricultural and Biological Engineers, USA [email protected] 479 Lanxin Liu College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 480 Legang Wang Foton Lovol International Heavy Industry Co., Ltd., Weifang, Shandong, China [email protected] 481 Lei He Institute of Mechanical Equipment, Xinjiang Academy of Agricultural and Reclamation Science, Shihezi, Xinjiang, China [email protected] 482 Lei Li College of Engineering , Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 483 Lei Ren University of Manchester, UK [email protected] 484 Lei Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 485 Lei Wang Zhejiang University, Hangzhou, Zhejiang, China [email protected] 486 Leilei Zhang College of Engineering, China Agricultural University, Beijing, China [email protected] 487 Leiqing Pan College of Food Technology and Sciences, Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 246 488 Li Gong Guangdong Agricultural Machinery Research Institute, Guangzhou, Guangdong, China [email protected] 489 Li Guo Jilin University, Changchun, Jilin, China [email protected] 490 Li Li College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 491 Li Li China Agricultural University, Beijing, China [email protected] 492 Li Ni China Agricultural University, Beijing, China [email protected] 493 Li Yang China Agricultural University, Beijing, China [email protected] 494 Li Ye Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 495 Li Zhang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 496 Lianbang Zheng Bureau of Agricultural Machinery, Heilongjiang Agriculture Committee, Heilongjiang, China [email protected] 497 Liang Chen College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected] 498 Liang Gong Shanghai Jiaotong University, Shanghai, China [email protected] 499 Liang He Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 500 Liang Jing School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 501 Liang Meng Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 502 Liang Sun Zhejiang Provincial Key Laboratory of Planting Equipment Technology, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China [email protected] 503 Liangfu Zhou Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 504 Lianhao Li China Agricultural University, Beijing, China [email protected] 505 Liansun Wu Farm Technology Group, Wageningen, the Netherlands [email protected] 506 Liaowen Huang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 507 Lichun Zhang College of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 508 Lidi Wang College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 509 Liezhou Zhong Fuli Institute of Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 510 Lifa Chai Hebei Agricultural University, Baoding, Hebei, China [email protected] 511 Lifeng Fan College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 247 512 Liguo Wei Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 513 Lijing Liu Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected] 514 Lijuan Kong Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 515 Lijuan Shi College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 516 Lijuan Xie College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 517 Limei Tian Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 518 Liming Xu China Agricultural University, Beijing, China [email protected] 519 Liming Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 520 Lin Chen College of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China [email protected] 521 Lin Luo Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected] 522 Lin Xue College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 523 Lina Cheng School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China [email protected] 524 Lina Zhang College of Engineering, China Agricultural University, Beijing, China [email protected] 525 Lina Zhou College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 526 Linchang Wang Bureau of Reclamation, Ministry of Agriculture, P. R. China [email protected] 527 Ling Zhao College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 528 Lingying Zhao The Ohio State University, USA [email protected] 529 Linlin Wang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 530 Linong Gong College of Mechanical and Electronic Engineering, Qingdao Agricultural University, Qingdao, Shandong, China [email protected] 531 Liqing Zhao Qingdao Agricultural University, Qingdao, Shandong, China [email protected] 532 Liu Liu College of Food Engineering, Northeast Agricultural University, Harbin, Heilongjiang, China [email protected] 533 Liu Liu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 248 534 Liu Wang Faculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 535 Liubin Luo College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 536 Lixia Hou College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 537 Lixin Wang Hebei University of Science and Technology, Shijiazhuang, Hebei, China [email protected] 538 Lixue Zhu College of Mechanical and Electronic Engineering, Zhongkai University of Agriculture and Engineering, Guangzhou, Guangdong, China [email protected] 539 Long Chen China Agricultural University, Beijing, China [email protected] 540 Long Qi College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 541 Longsheng Fu College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 542 Lu Lin Fuli Institute of Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 543 Lu Sun College of Food Science and Nutritional Engineering, China Agricultural Engineering, Beijing, China [email protected] 544 Luis Santos Pereira Technical University of Lisbon, Brazil luis.santospereira@gmail. com 545 Lujia Han College of Engineering, China Agricultural University, Beijing, China [email protected] 546 Lumkes John Purdue University, USA [email protected] 547 Luofang Wang Hunan Bureau of Agricultural Mechanization Management, China 548 Luowei Pei Zhejiang University, Hangzhou, Zhejiang, China [email protected] 549 Luquan Ren Chinese Academy of Sciences, Beijing, China [email protected] 550 Lurui Zhang College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 551 Luyu Ding China Agricultural University, Beijing, China [email protected] 552 Macak Miroslav Slovak University of Agriculture in Nitra, Slovakia [email protected] 553 Maki Taichi Kyushu University, Japan [email protected] 554 Malcolm Wegener The University of Queensland, Australia [email protected] 555 Man Luo School of Light Chemistry and Food Science, South China University of Technology, Guangzhou, China [email protected] 249 556 Man Zhang China Agricultural University, Beijing, China [email protected] 557 Manjin Cheng Inner Mongolia Institute of Water Resource Sciences, Hohhot, Inner Mongolia, China [email protected] 558 Manquan Zhao College of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 559 Mao Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 560 Marc Vanacht AG Business Consultants, USA [email protected] 561 Marcelo Dodson Argosy University, Brazil [email protected] 562 Marenya Moses University of Venda, South Africa moses.marenya@univen. ac.za 563 Maria Paula Amador Escola Superior Agráriade Coimbra, Portugal [email protected] 564 Mario García Petillo Universidad de la República-Facultad de Agronomía, Uruguay [email protected] 565 Mark L. Wahlqvist Epidemiology & Preventive Medicine, Faculty of Medicine, Monash University, Australia 566 Mary Leigh Wolfe Virginia Tech, USA [email protected] 567 Meghdad Khazaee Department of Mechanics of Agricultural Machinery, Tarbiat Modares University, Tehran, Iran [email protected] 568 Meijia Wang College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 569 Meisheng Jiang China Agricultural University, Beijing, China [email protected] 570 Meng Guan College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China guanmeng.19880109@163. com 571 Meng Hu Shanghai Jiaotong University, Shanghai, China [email protected] 572 Meng Liu College of Vehicle and Traffic Engineering, Henan University of Science and Technology, Luoyang, Henan, China [email protected] 573 Meng Wang College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 574 Meng Yang Terrain-Machine Bionics Engineering Lab, Jilin University, Changchun, Jilin, China [email protected] 575 Meng Yang College of Food Science and Nutritional Engineering, China Agricultural Engineering, Beijing, China [email protected] 576 Meng Zhang China Agricultural University, [email protected] 577 Mengchu Huang Shanghai Springer Information Consulting Services Co., Ltd, Shanghai, China mengchu.huang@springer. com 578 Mengji Guo China Agricultural University, Beijing, China [email protected] 250 579 Merete Lyngbye Munters, Denmark [email protected] 580 Mete Yiğit Akdeniz University, Turkey [email protected] 581 Miao Zhang China Agricultural University, Beijing, China [email protected] 582 Michael Ryan Trade and Agriculture Directorate, OECD 583 Michele Reba USDA-Agricultural Research Service, USA [email protected] 584 Mikio Umeda Graduate School of Agriculture, Kyoto University, Japan [email protected]. kyoto-u.ac.jp 585 Min Feng Office of Agriculture History Researches, China Agricultural University, Beijing, China [email protected] 586 Min Liu China Agricultural Machinery Testing Center, Ministry of Agriculture, China [email protected] 587 Min Wei School of Agronomic Sciences and Engineering, Shandong Agricultural University, Tai'an, Shangdong, China [email protected] 588 Ming Cui Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 589 Ming Li Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 590 Ming Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 591 Ming Wang Laboratory of Energy Dynamics, Northeast Agricultural University, Harbin, Heilongjiang, China [email protected] 592 Ming Yao College of Energy and Dynamics Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China [email protected] 593 Ming Zhu Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 594 Mingchuan Chen Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected] 595 Mingfeng Liu College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 596 Mingfu Huang Guangxi Bureau of Agricultural Mechanization Management, Guangxi, China 597 Mingjin Xin College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 598 Mingming Xu College of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China [email protected] 599 Mingsen Huang Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected] 600 Mingyong Xie Nanchang University, Nanchang, Jiangxi, China 601 Mingyou Wang Nanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 251 602 Mingzhen Li College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 603 Mingzhu Hao College of Information Science and Technology, Ningbo University, Ningbo, Zhejiang, China [email protected] 604 Minin Vladislav North-West Research Institute of Agricultural Engineering & Electrification, Turkey [email protected] 605 Minli Yang College of Engineering, China Agricultural University, Beijing, China [email protected] 606 Minzan Li China Agricultural University, Beijing, China [email protected] 607 Mladen Todorovic CIHEAM-Mediterranean, Italy [email protected] 608 Mo Li Jilin University, Changchun, Jilin, China [email protected] 609 Mo Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 610 Morten Dam Rasmussen Aarhus University, Denmark [email protected] 611 Mousong Wu School of Water Resources and Hydropower Engineering, Wuhan University, Wuhan, Hubei, China [email protected] 612 Moustafa Fadel UAE University, Canada [email protected] 613 Muhetar Aisha Bureau of Agricultural Machinery Management, Department of Agriculture and Animal Husbandry, Xinjiang, China 614 Muhua Liu College of Engineering, Jiangxi Agricultural University, Nanchang, Jiangxi, China [email protected] 615 Na Duan College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 616 Na Li College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected] 617 Na Li College of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 618 Na Xu China Western Energy and Environment Research Center, Lanzhou University of Technology, Lanzhou, Gansu, China [email protected] 619 Naiqian Zhang Kansas State University, USA [email protected] 620 Namal Samarakoon Industrial Development Officer for Agri-Business Development Branch, UNIDO 621 Namkyu Yun National Academy of Agricultural Science, Rural Development Administration, Republic of Korea [email protected] 622 Nan Fu Soochow University, Suzhou, Jiangsu, China [email protected] 623 Nan Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 624 Nan Xia College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 252 625 Nanxin Chen China Agricultural University, Beijing, China [email protected] 626 Naoshi Kondo Laboratory of Bio-Sensing Engineering, Division of Environmental Science & Technology Graduate School of Agriculture, Kyoto University, Japan [email protected]. ac.jp 627 Naoto Shimizu Hokkaido University, Japan [email protected]. ac.jp 628 Nazneen Barday Postharvest Technology Lab, Stellenbosch University, Stellenbosch, CPT, South Africa [email protected] 629 Neugebauer Maciej University of Warmia and Mazuryin Olsztyn, The Netherlands [email protected] 630 Nick Sigrimis Ag. University of Athens, USA [email protected] 631 Nigel Hancock University of Southern Queensland, Australia [email protected] 632 Nimmermark Sven Swedish University of Agricultural Sciences, Sweden [email protected] 633 Ning Liu College of Food Engineering, Harbin University of Commerce, Harbin, Heilongjiang, China [email protected] 634 Ning Wang Oklahoma State University, USA [email protected] 635 Ning Yang Institute of Tillage and Planting, Liaoning Academy of Agricultural Sciences, Shenyang, Liaoning, China [email protected] 636 Ningning Yao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 637 Noboru Noguchi Precision Agricultural Research Center, China Agricultural University, Beijing, China [email protected] 638 Norman Scott National Academy of Engineering/Cornell University, Cocos (Keeling) Islands [email protected] 639 Nozdrovicky Ladislav Slovak University of Agriculture in Nitra, Slovakia ladislav.nozdrovicky@uniag. sk 640 Ofner-Schroeck Elfriede LFZ Raumberg-Gumpenstein, Austria elfriede.ofner-schroeck@ raumberg-gumpenstein.at 641 Ogawa Yukiharu Chiba University, Japan [email protected] 642 Oleg Marchenko All-Russia Research Institute for Mechanization in Agriculture (GNUVIM Rossel khoz academyi), Ukraine [email protected] 643 Olivares Diaz Edenio Hokkaido University, Japan [email protected] 644 Osman Yaldiz D e p a r t m e n t o f F a r m M a c h i n e r y, A k d e n i z University, Antalya, Turkey [email protected] 645 Palacios-Vélez Óscar Luis Postgrado de Hidrociencias, Campus Montecillo del Colegio de Postgraduados en Ciencias Agrícolas, Montecillo, Estado de México, México [email protected] 646 Panpan Yuan College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected] 647 Papanastasiou Dimitris Laboratory of Agricultural Engineering and Environment, Institute for Research and Technology of Thessaly, Centre for Research and Technology, Hellas, Greece [email protected] 253 648 Pavel Kic Czech University of Life Sciences, Czech Republic [email protected] 649 Peeyush Soni Asian Institute of Technology, Thailand [email protected] 650 Pei Huang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 651 Peichen Hou Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 652 Peitong Liu College of Food Science and Nutritional Engineering, China Agricultural Engineering, Beijing, China [email protected] 653 Peizeng Zhang Department of Agriculture of Shanxi, China 654 Peng Luo College of Mechanical Engineering, Tianjin University of Commerce, Tianjin, China [email protected] 655 Pengcheng Nie School of Biosystems Engineering and Food Sciences, Zhejiang University, Hangzhou, Zhejiang China [email protected] 656 Pengfei Zhao National Engineering Research Center for Information Technology in Agriculture, Beijing, China [email protected] 657 Pengfei Zhao College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 658 Perendeci Nuriye Akdeniz University, Engineering Faculty, Turkey [email protected] 659 Peter Groot Koerkamp Wageningen University, the Netherlands [email protected] 660 Peter Schulze Lammers University of Bonn, Germany [email protected] 661 Phakwipha Sutthiwaree College of Engineering, China Agricultural University, Beijing, China [email protected] 662 Philippe Van Overbeke Technology & Food Unit, Institute for Fisheries and Agricultural Research (ILVO), Belgium philippe.vanoverbeke@ilvo. 663 Pimentel-Bribiesca Luis Forestry Department, Universidad Autónoma Chapingo, Mexico [email protected] 664 Ping Ai College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 665 Ping Li Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Xinxiang, China [email protected] 666 Pingping Li Nanjing Forestry University, Nanjing, Jiangsu, China [email protected] 667 Pingyi Liu College of Engineering, China Agricultural University, Beijing, China [email protected] 668 PurwokoHari Kuncoro The United Graduate School of Agricultural, Indonesia [email protected] 669 Qian Chen Northeast Agricultural University, Harbin, Heilongjiang, China [email protected] 670 Qian Zhang College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected] 254 Qian Zhang College of Mechanical Dynamics, Dalian Ocean University, Dalian, Liaoning, China [email protected] 672 Qiang Fu International Joint Research Center for Persistent Toxic Substances (IJRC-PTS), School of Water Conservancy and Civil Engineering, Northeast Agricultural University, Harbin, China [email protected] 673 Qiao Wei College of Engineering, China Agricultural University, Beijing, China [email protected] 674 Qiaoli Wang College of Engineering, Beijing Forestry University, Beijing, China [email protected]. cn 675 Qiaomin Chen Nanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 676 Qiaona Pan College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 677 Qiaoxia Yuan College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 678 Qichang Yang Institute of Environment and Sustainable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China [email protected] 679 Qin Liu Nanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 680 Qin Tong Royal Veterinary College, UK [email protected] 681 Qin Zhang Washington State University, USA [email protected] 682 Qing Dong College of Engineering, China Agricultural University, Beijing, China [email protected] 683 Qing Liu Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 684 Qing Liu College of Economics and Management, China Agricultural University, Beijing, China [email protected] 685 Qing Xie China Agricultural University, Beijing, China [email protected] 686 Qing Yang College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 687 Qinghua Han Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected]. cn 688 Qingjie Wang China Agricultural University, Beijing, China [email protected] 689 Qingmei Cao Vehicle & Transportation Engineering Institute, Henan University of Science and Technology, Luoyang, Henan, China [email protected] 690 Qingsong Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 691 Qingting Liu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 671 255 692 Qingwen Chen Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 693 Qingyan Wang Beijing Academy of Agriculture and Forestry Sciences, Beijing, China [email protected] 694 Qingzhi Di College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 695 Qiong He College of Engineering, China Agricultural University, Beijing, China [email protected] 696 Qiong Wu College of Information and Electrical Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 697 Qiulin Ma College of Engineering, China Agricultural University, Beijing, China [email protected] 698 Quan Jia Chinese Academy of Agricultural Mechanization Sciences [email protected] 699 Quanrong Jing Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 700 Quendler Elisabeth University of Natural Resources and Life Sciences, Austria elisabeth.quendler@boku. ac.at 701 R. Cengiz Akdeniz Ege University, Turkey [email protected]. edu.tr 702 Radhey Lal Kushwaha University of Saskatchewan, Canada [email protected] 703 Ran Chen Shanghai Jiaotong University, Shanghai, China [email protected] 704 Randall Joseph Renze John Deere, USA RenzeRandallJ@JohnDeere. com 705 Rani Kumudini Indian Ministry of Agriculture, India 706 Ratti Cristina Laval University, Canada [email protected] 707 Ravi Ratnayake Trade and Investment Division, United Nations Economic and Social Commission for Asia and the Pacific 708 Rebogile R. Mphahlele Postharvest Technology Research, South Africa [email protected] 709 Ren Du North China Institute of Airspace Engineering, Langfang, Hebei, China [email protected] 710 Renfu Lu USDA/ARS, USA [email protected] 711 Reng Liang College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 712 Reyes Parra Juan Esteban Universidad del Bío-Bío, Chile [email protected]. ubiobio.cl 713 Ricardo Darío Villalobos Carvajal Universidad del Bío-Bío, Chile [email protected] 714 Ricardo Oliano De Carvalho Federal University of Pelotas, Brazil [email protected]. br 256 715 Richard John Godwin Royal Academy of Engineering, UK dickjillgodwin@waitrose. com 716 Rika Kitamura Utsunomiya university, Japan [email protected] 717 Robin Paul INRA, France [email protected] 718 Roland W. Melse Wageningen University, New Zealand [email protected] 719 Roman Galik Slovak University of Agriculture in Nitra, Faculty of Engineering, Slovakia [email protected] 720 Rong Xiang China Jiliang University, Hangzhou, Zhejiang, China [email protected] 721 Rong Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 722 Rui Zhang Jilin University, Changchun, Jilin, China [email protected] 723 Ruihua Wei Tongji University, Shanghai, China [email protected] 724 Ruili Wang Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 725 Ruiwen Liu Chinese Society for Agricultural Machinery, China [email protected] 726 Ruixiao Cui College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 727 Ruixiu Sui USDA-ARSCPSRU, USA [email protected] 728 Ruizhi Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 729 Rune Røjgaard Andreasen Danish Agriculture & Food Council, Denmark [email protected] 730 Runmao Wang Secretariat of International Society of Bionic Engineering, Jilin University, Changchun, Jilin, China [email protected] 731 Salvador Calvet Universitat Politecnica de Valencia, Spain [email protected] 732 Sandro Liberatori Italian Body for Agricultural Mechanization and Engineering, UN 733 Sang Hun Kim Kangwon National University, Republic of Korea [email protected] 734 Sarfert Andreas GKN Land Systems, Germany [email protected] 735 Se Woon Hong M3-BIORES, KULeuven, Republic of Korea sewoon.hong@biw. kuleuven.be 736 Sebastian Kemper TU Braunschweig, Germany s.kemper@tu-braunschweig. de 737 Segura Ponce Luis Andrés Universidad del Bío-Bío, Chile [email protected] 738 Seiichi Oshita The University of Tokyo, Japan [email protected]. ac.jp 739 Seiji Matsuo The University of Tokyo, Japan [email protected] 740 Seishi Ninomiya The University of Tokyo, Japan [email protected] 257 741 Sennan Song Department of Vehicle Engineering, College of Engineering, China Agricultural University, Beijing, China [email protected] 742 Seong-Heon Kim Gyeongsang National University, Republic of Korea [email protected] 743 Serkan Boyar D e p t . o f A g r i c u l t u r a l M a c h i n e r y, F a c . O f Agriculture, Süleyman Demirel Univ., Turkey [email protected] 744 Seth Manuwa Landmark University, Omuaran, Nigeria manuwaseth@rocketmail. com 745 Seyhun Yurdugul Abant Izzet BAYSAL University, Turkey [email protected] 746 Sha Li Dalian Ocean University, Dalian, Liaoning, China [email protected] 747 Sha Liu College of Engineering, China Agricultural University, Beijing, China [email protected] 748 Shan Li Institute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology, Xi'an, Shaanxi, China [email protected] 749 Shangfeng Du College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 750 Shanjun Li College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 751 Shanshan Qiu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 752 Shanshan Song College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected] 753 shanshan Yan College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 754 Shanshan Yu Nanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 755 Shanshan Zhou College of Resources and Environment, Northwest A&F University, Yangling, Shaanxi, China [email protected] 756 Shaochun Ma Washington State University, USA [email protected] 757 Shaohua Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 758 Shaojin Wang College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 759 Shaolong Wang Northeast Agricultural University, Harbin, Heilongjiang, China wangshaolong1989@163. com 760 shaoping han Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China [email protected] 761 Shaoping Qian Zhejiang University, Hangzhou, Zhejiang, China [email protected] 762 Shaozhong Kang China Agricultural University, Beijing, China [email protected] College of Mechanical and Electrical Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 763 258 Shaozhong Lv 764 Shasha Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 765 Shemshura Olga N. Institute of Microbiology and Virology, Committee of Science, Ministry of Science and Education, Almaty, Republic of Kazakhstan [email protected] 766 Sheng Liu Beijing Academy of Agriculture and Forestry Sciences, Beijing, China [email protected] 767 Sheng Yin Beijing Technology and Business University, Beijing, China [email protected] 768 Shenghuo Jia National Seed Processing Equipment Engineering Technology Research Center, Jiuquan, Gansu, China [email protected] 769 Shenglian Lu Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 770 Shichun Jian Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected] 771 Shifang Wang Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 772 Shifeng Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 773 Shifu Shu Institute of Agricultural Engineering, Jiangxi Academy of Agricultural Sciences, Nanchang, Jiangxi, China [email protected] 774 Shikun Sun Northwest A&F University, Yangling, Shaanxi, China [email protected] 775 Shili Zhou College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 776 Shiming Sun Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected] 777 Shiqiang Jia College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 778 Shouqi Yuan Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 779 Shouzhi Guo College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an, Shandong, China [email protected] 780 Shu Liu The University of Tokyo, Japan [email protected] 781 Shuai Dong College of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 782 Shuai Wang College of Food Science and Technology, Shanghai Ocean University, Shanghai, China [email protected] 783 Shuangcheng Tang Xi'an University of Technology, Xi'an, Shaanxi, China [email protected] 784 Shufa Chen College of Mechanical Engineering, Huaihai Institute of Technology, Lianyungang, Jiangsu, China [email protected] 785 Shufeng Han Deere & Co., USA [email protected] 259 786 Shuhua Li Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 787 Shuhua Wang Shanxi Academy of Agricultural Sciences, Taiyuan, Shanxi, China [email protected] 788 Shujin Qiu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 789 Shujun Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 790 Shujun Zhang School of Computing and Technology, UK [email protected] [email protected] 791 Shulin Chen School of Chemical and Biological Engineering, Washington State University, Pullman, WA 99164, USA 792 Shulin Hou College of Engineering, China Agricultural University, Beijing, China [email protected] 793 Shumao Wang College of Engineering, China Agricultural University, Beijing, China [email protected] 794 Shun Ren College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 795 Shun Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 796 Shuping Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 797 Shuqi Shang Qingdao Agricultural University, Qingdao, Shandong, China [email protected] 798 Shusheng Xu College of Mechanical and Electronic Engineering, Qingdao Agricultural University, Qingdao, Shandong, China [email protected] 799 Shuso Kawamura Hokkaido University, Japan [email protected] 800 Shuwen Wang Northeast Agricultural University, Harbin, Heilongjiang, China [email protected] 801 Shuxi Tang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 802 Shuzhan Wang Henan University of Technology, Zhengzhou, Henan, China www. [email protected] 803 Shuzhen Hu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 804 Shuzhi Yuan China Agricultural University, Beijing, China [email protected] 805 Si Chen School of Food Science and Biotechnology, Zhejiang Gongshang University, Zhejiang, China [email protected] 806 Silvio Lima INOVAGRI Institute, Brazil [email protected] 807 Solhee Kim Seoul National University, Republic of Korea [email protected] 808 Solowiej Piotr University of Warmia and Mazury, the Netherlands [email protected] 809 Songbai Ma College of Engineering, China Agricultural University, Beijing, China [email protected] 260 810 Songchao Zhang Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 811 Songhao Shang State Key Laboratory of Hydroscience and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing, China [email protected] 812 Songhuai Du College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 813 Songming Zhu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 814 Søren Pedersen University of Aarhus, Denmark [email protected] 815 Sovatna Phon Kyushu University, Cambodia [email protected] 816 Sreekala Bajwa North Dakota State University, USA [email protected] 817 Stefan Mihina Slovak University of Agriculture, Slovakia [email protected] 818 Stefan Pogran Slovak University of Agriculture in Nitra, Slovakia [email protected] 819 Stegmaier Thomas ICBE, Germany thomas.stegmaier@itv- 820 Stella Vieira Biological Institute, Experimental Center, Campinas, SP, Brazil [email protected] 821 Stephane Godbout IRDA, Canada stephane.godbout@gmail. com 822 Stephen Searcy Texas A&M University, USA [email protected] 823 Steven R. Evett USDA Agricultural Research Service, USA [email protected] 824 Steven Taylor Auburn University, USA [email protected] 825 Stone Kenneth USDA-ARS, USA [email protected] 826 Subo Tian College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 827 Suchao Ma Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected] 828 Sue Nokes University of Kentucky, USA [email protected] 829 Sui Tan College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 830 Suming Chen Taiwan Agricultural Mechanization Research and Development Center, Taiwan, China [email protected] 831 Sun Baoxia South China Agricultural University [email protected] 832 Sun Sun Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 833 Sunok Chung Precision Agricultural Research Center, China Agricultural University, Beijing, China [email protected] 834 Suxian Yang Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 261 Nanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] SKOV, Denmark [email protected] Universidad del Bío-Bío, Chile [email protected] Tadeusz Juliszewski University of Agriculture in Krakow, The Netherlands [email protected] 839 Taehwan Ha Seoul National University, Republic of Korea [email protected] 840 Tammo Steenhuis Cornell University, USA [email protected] 841 Tao Cui College of Engineering, China Agricultural University, Beijing, China [email protected] 842 Tao Lin University of Illinois at Urbana-Champaign, USA [email protected] 843 Tao Wen College of Mechanical & Electrical Engineering, Central South University of Forestry and Technology, Changsha, Hunan, China [email protected] 844 Tao Wu College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 845 Tao Xu Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected] 846 Taotao Mao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 847 Tavs Nyord Aarhus University, Denmark [email protected] 848 Teixeira Arthur University of Florida, USA [email protected] 849 Teng Ma Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 850 Teng Teen Lim University of Missouri, USA [email protected] 851 Tengfei Li College of Engineering, China Agricultural University, Beijing, China [email protected] 852 Terry Howell, Jr. American Society of Agricultural and Biological Engineers, USA [email protected] 853 Theodoros Gialamas Technological Educational Institute, Greece [email protected] 854 Thomas Banhazi University of Southern Queensland, Australia [email protected] 855 Thomas Hanskarl Heinrich Jungbluth Germany [email protected] 856 Thomas J. Trout USDA Agricultural Research Service, USA [email protected] 857 Thurner Stefan Institute for Agricultural Engineering and Animal Husbandry, Bavarian State Research Centre for Agriculture, Germany [email protected] 858 Tianhu Liu South China Agricultural University, Guangzhou, China [email protected] 835 Suzhen Wang 836 Svend Morsing 837 Tabilo Munizaga Gipsy Elizabeth 838 262 859 Tianjun Jing College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 860 Tiansheng Su Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 861 Tianshuai Wang Water Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 862 Tiantao Feng College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an, Shandong, China [email protected] 863 Tianyao Xu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 864 Tianying Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 865 Tie Shi Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected] 866 Tiezhong Zhang China Agricultural University, Beijing, China [email protected] 867 Timothy Simalenga 1Centre for Coordination of Agricultural Research and development for Southern Africa (CCARDESA), Gaborone, Botswana [email protected] 868 Ting Li College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 869 Ting Yang Xi'an University of Technology, Xi'an, Shaanxi, China [email protected] 870 Tingmin Yu ARC, South Africa [email protected] 871 Tingting Ning Institute of Soil and Water Conservation, Chinese Academy of Sciences,Ministry of Water Resources, Yangling, Shaanxi, China [email protected] 872 Tong Chen College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 873 Tong Sun College of Engineering, Jiangxi Agricultural University, Nanchang, Jiangxi, China [email protected] 874 Tonghai Liu Tianjin Agricultural University, Tianjin, China [email protected] 875 Toshinori Kimura Hokkaido University, Japan [email protected] 876 Tuo Zhao China Western Energy and Environment Research Center, Lanzhou University of Technology, Lanzhou, Gansu, China [email protected] 877 Ukhyeon YEO Seoul National University, Republic of Korea [email protected] 878 Ulrike Schimpf Institute of Agricultural and Urban Ecological, Germany [email protected] 879 Umezuruike Linus Opara Stellenbosch University, South Africa [email protected] 880 Vadim Tsukor University of Applied Sciences Osnabrueck, Germany [email protected] 263 881 Van der Heyden Caroline Ghent University, Belgium caroline.vanderheyden@ ugent 882 Vilas Mahadeo Salokhe Kaziranga University, India [email protected] 883 Vladimir Krocko Slovak University of Agriculture in Nitra, Slovakia [email protected] 884 Vladimir Rataj Slovak University of Agriculture in Nitra, Slovakia [email protected] 885 Vladislav Minin State Research Institution “North-West Research Institute of Agricultural Engineering and Electrification”, Russia [email protected] 886 Wang Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected]. edu.cn 887 Wanglin He Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China [email protected] 888 Wangyuan Zong College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 889 Wanlin Gao College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 890 Wegener Malcolm The University of Queensland, Australia [email protected]. au 891 Wei Chen Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China [email protected] 892 Wei Cui Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected] 893 Wei Deng Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 894 Wei Guo The University of Tokyo, Japan [email protected] 895 Wei Hu Tianjin Agricultural Machinery Development and Service Center, Tianjin, China [email protected] 896 Wei Jiao Shandong Academy of Agricultural Mechanization Sciences, Jinan, Shandong, China [email protected] 897 Wei Li College of Engineering, China Agricultural University, Beijing, China [email protected] 898 Wei Lin Jilin University, Changchun, Jilin, China [email protected] 899 Wei Liu College of Engineering, China Agricultural University, Beijing, China [email protected] 900 Wei Lu College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 901 wei Song Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 902 Wei Tang China Agricultural University, Beijing, China [email protected] 903 Wei Wang College of Engineering, China Agricultural University, Beijing, China [email protected] 904 Wei Wang C o l l e g e o f Wa t e r C o n s e r v a n c y, S h e n y a n g Agricultural University, Shenyang, Liaoning, China [email protected] 905 Wei Wang College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China [email protected] 264 906 Wei Xiang Office of Teaching and Research in Agricultural Machinery , Hunan Agricultural University, Changsha, Hunan, China [email protected] 907 Wei Yang Faculty of Modern Agriculture Engineering, Kunming University of Science and Technology, Kunming, Yunnan, China [email protected] 908 Wei Zhang Civil Aviation University of China, Tianjin, China [email protected] 909 Wei Zhu College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected] 910 Wei Zou Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 911 Weidong Ding Bureau of Agricultural Mechanization Management, Xinjiang Production and Construction Corps, China [email protected] 912 Weidong Jiang Shandong Wuzheng Group, China [email protected] 913 Weidong Shi Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 914 Weidong Zhuang College of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China [email protected] 915 Weihong Min Jilin Agricultural University, Changchun, Jilin, China [email protected] 916 Weihua Qin College of Electromechanical Engineering, Henan Agricultural University, Henan, China [email protected] 917 Weijun Tian Jilin University, Changchun, Jilin, China [email protected] 918 Weimin Zhang College of Food Science and Technology, Hainan University, Haikou, Hainan, China [email protected] 919 Weipeng Zhang China Agricultural University, Beijing, China [email protected] 920 Weiping Bi College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 921 Weiping Liu College of Resources and Environment, Southwest University, Chongqing, China [email protected] 922 Weiqiang Fu National Research Center of Intelligent Equipment for Agriculture, Beijing, China [email protected] 923 Weiqiao Lv Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 924 Weitang Song College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 925 Weiwei Si Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 926 Weiwei Wang School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 927 Weixia Zhao China Institute of Water Resources and Hydropower Research, Beijing, China 928 Weixin Zhang Institute of Agricultural Economy and Information, Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China [email protected] 265 929 Weixing Zhu Institute of Agricultural Electrification and Automation, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 930 Weixiong Wu College of Engineering, South China University of Technology/College of Mechanical and Electronic Engineering, Sichuan Agricultural University [email protected] 931 Wen Han College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 932 Wenchao Lu Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 933 Wenhai Wang College of Economics and Management, China Agricultural University, Beijing, China [email protected] 934 Wenhua Mao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 935 Wenhui Cui College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 936 Wenjing Ling College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 937 Wenlong Cao Jilin Academy of Agricultural Mechanization Sciences, Changchun, Jilin, China [email protected] 938 Wenming Zong College of Engineering, Anhui Agricultural University, Hefei, Anhui, China [email protected] 939 Wenxiu Wang College of Engineering, China Agricultural University, Beijing, China [email protected] 940 Wenyu Yi Sichuan Research & Design Institute of Agricultural Machinery, Chengdu, Sichuan, China [email protected] 941 Wenyu Zhang Institute of Agricultural Economy and Information, Jiangsu Academy of Agricultural Sciences, Nanjing, Jiangsu, China [email protected] 942 Wenzhuo Wang College of Engineering, China Agricultural University, Beijing, China [email protected] 943 Xia Li College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected] 944 Xian Li Chinese Academy of Agricultural Sciences, Beijing, China [email protected] 945 Xian Liu Center for Agricultural Mechanization Technology Development and Extension, MOA, China [email protected] 946 Xianfa Fang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 947 Xiang Yin School of Light Industry & Agriculture Engineering, Shandong University of Technology, Zibo, Shandong, China [email protected] 948 Xiangcai Zhang China Agricultural University, Beijing, China [email protected] 949 Xiangdong Liu College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected] 950 Xiangdong Shen Water Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 266 951 Xianghai Yan Henan University of Technology, Zhengzhou, Henan, China [email protected] 952 Xianghong Guo College of Water Conservancy Sciences and Engineering, Taiyuan University of Technology, Taiyuan, Shanxi, China [email protected] 953 Xiangjiang Liu Zhejiang University, Hangzhou, Zhejiang, China [email protected] 954 Xiangjun Zou South China Agricultural University, Guangzhou, China [email protected] 955 Xiangqian Dong Department of agricultural engineering, College of Engineering, China Agricultural University, Beijing, China [email protected] 956 Xiangyu Song Sensors and Data Analysis Department, Lely Industries N.V., Maassluis, the Netherlands [email protected] 957 Xianqi Li College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning China [email protected] 958 Xiansheng Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 959 Xianwang Li Nanjing Research Institute for Agriculture Mechanization,Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 960 Xiao Gao China Agricultural University, Beijing, China [email protected] 961 Xiao Liu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 962 Xiao Tan School of Water Resources and Hydropower Engineering, Wuhan University, Wuhan, Hubei, China [email protected] 963 Xiao Yang Water Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 964 Xiaobo Wang College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China [email protected] 965 Xiaobo Zou School of Food & Biological Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 966 Xiaochao Zhang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 967 Xiaodan Wu Nanchang University, Nanchang, Jiangxi, China [email protected] 968 Xiaodong Gao Northwest A&F University, Yangling, Shaanxi, China [email protected] 969 Xiaodong Guan Chinese Society for Agricultural Engineering, China [email protected] 970 Xiaodong Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 971 Xiaodong Qiao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 972 Xiaodong Ren Water Conservancy and Civil Engineering College, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 267 973 Xiaodong Zhang College of Mechanical Engineering, Liaoning University of Petro-Chemical Technology, Fushun, Liaoning, China [email protected] 974 Xiaofeng Li College of Mechanical Engineering, Guangxi University, Nanning, Guangxi, China [email protected] 975 Xiaohong Lee College of Economics and Management, China Agricultural University, Beijing, China [email protected] 976 Xiaohui Qian Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected] 977 Xiaohui Zhang College of Mechanical Engineering, Shangdong Agricultural University, Tai'an, Shandong, China [email protected] 978 Xiaojiang Zhu Bureau of Agricultural Machinery Management, Department of Agriculture and Animal Husbandry, Ningxia, China [email protected] 979 Xiaojun Shen Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China [email protected] 980 Xiaokang Li Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China [email protected] 981 Xiaoli Liu China Agricultural University, Beijing, China [email protected] 982 Xiaolin Zhan College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 983 Xiaoling Su College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 984 Xiaomin Mao China Agricultural University, Beijing, China [email protected]. cn 985 Xiaoming Wang Guangxi Academy of Agricultural Mechanization Sciences, China [email protected] 986 Xiaoming Wei Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 987 Xiaopeng Zhao Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 988 Xiaoping Bai Jinhua Polytechnic College, Jinhua, Zhejiang, China [email protected] 989 Xiaoping Jin College of Engineering, China Agricultural University, Beijing, China [email protected] 990 Xiaoqiang Du Faculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China [email protected] 991 Xiaorong Lv College of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China [email protected] 992 Xiaoshun Zhao College of Electromechanical Engineering, Hebei Agricultural University, Baoding, Hebei, China [email protected] 993 Xiaoxia Li College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected] 994 Xiaoying Yu Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 268 995 Xiaoyu Zhou Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 996 Xibin Ding College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 997 Ximei Tian Secretariat of International Society of Bionic Engineering, Jilin University, Changchun, Jilin, China [email protected] 998 Xin He College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 999 Xin Lu Henan Academy of Agricultural Sciences, Zhengzhou, Henan, China [email protected] 1000 Xin Mao College of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang, China [email protected] 1001 Xin Wang University of Shanghai for Science and Technology, Shanghai, China [email protected] 1002 Xin Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1003 Xin Wang China Agricultural University, [email protected] 1004 Xin YAN China Institute of Water Resources and Hydropower Research, Beijing, China [email protected] 1005 Xin Zhang Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 1006 Xin Zhang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1007 Xin Zhang College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 1008 Xin'an Zeng Institute of Modern Food Engineering, South China University of Technology, Guangzhou, China [email protected] 1009 Xinfeng Wang College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1010 Xing Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1011 Xing Ma Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 1012 Xingjian Sun Tongji University, Shanghai, China [email protected] 1013 Xingjian Zuo Northwest A&F University, Yangling, Shaanxi, China [email protected] 1014 Xingyao Hao Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 1015 Xinhui Wu College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 1016 Xining Zhao Northwest A&F University, Yangling, Shaanxi, China [email protected] 1017 Xinjin Li Jiangxi Institute of Agricultural Mechanization Sciences, China [email protected] 269 1018 Xinqun Zhou Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 1019 Xinxin Li School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology, Shanghai, China lixinxin_19891110@163. com 1020 Xiong Zhao Faculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, China [email protected] 1021 Xiongzhe Han Seoul National University, Republic of Korea [email protected] 1022 Xiulun Wang Mie University, Japan [email protected] 1023 Xiumei Tang Beijing Academy of Agriculture and Forestry Sciences, Beijing, China [email protected] 1024 Xiuying Cao Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 1025 Xiuying Tang College of Engineering, China Agricultural University, Beijing, China [email protected] 1026 Xiwen Luo South China Agricultural University, Guangzhou, China [email protected] 1027 Xiyin Gao College of Mechanical Engineering, Agricultural University of Heibei, Baoding, Hebei, China [email protected] 1028 Xu Liu College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1029 Xu Ma College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 1030 Xu Sun College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 1031 Xu Zhang College of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 1032 Xuan Wang College of Food Science and Nutritional Engineering, China Agricultural Engineering, Beijing, China wangxuan910524@gmail. com 1033 Xuebin Qi Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Xinxiang, China 1034 Xuecheng Zhou College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 1035 Xuefeng Diao Sichuan Provincial Agricultural Department, Sichuan, China 1036 Xuegeng Chen Xinjiang Academy of Agricultural and Reclamation Science, Shihezi, Xinjiang, China [email protected] 1037 Xueguan Zhao China Agricultural University, Beijing, China [email protected] 1038 Xuejun Yang Modern Agricultural Equipment Co.,Ltd., Beijing, China [email protected] 1039 Xueling Wang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 1040 Xueping Li College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 270 1041 Xueshuang Shi College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1042 Xuewei Bai College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 1043 Xujun Ye Hirosaki University, Japan [email protected] 1044 Xunlan Li Citrus Research Institute, Southwest University, Chongqing, China [email protected] 1045 Xuying Li College of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 1046 Ya Xin Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 1047 Yading Wang Institute of Bio-Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 1048 Yajiao Zhang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 1049 Yaliang Niu Department of Electrical Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 1050 Yamei Wu Hohhot Branch, Chinese Academy of Agricultural Mechanization Sciences, Hohhot, Inner Mongolia, China [email protected] 1051 Yameng Xue Institute of Food Science and Engineering, University of Shanghai for Science and Technology, Shanghai, China [email protected] 1052 Yan Long College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 1053 Yan Yu Qingdao Agricultural University, Qingdao, Shandong, China [email protected] 1054 Yanbin Li College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1055 Yanchao Zhang Zhejiang University [email protected] 1056 Yanchen Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1057 Yanfei Cao College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1058 Yanfeng Li China Institute of Water Resources and Hydropower Research, Beijing, China [email protected] 1059 Yang Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1060 Yang Ju College of Oil and Food, Henan University of Technology, Zhengzhou, Henan, China [email protected] 1061 Yang Li College of Engineering, Nanjing Agricultural University, Nanjing, Jiangsu, China 1062 Yang Liu Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 271 1063 Yang Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1064 Yang Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1065 Yang Tao Department of Bioengineering, University of Maryland, USA 1066 Yang Xu College of Engineering, China Agricultural University, Beijing, China [email protected] 1067 Yang Yang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1068 Yang Yu School of Water Resources and Environment, China University of Geosciences, Beijing, China [email protected] 1069 Yangchun Liu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1070 Yangtai Liu University of Shanghai for Science and Technology, Shanghai, China [email protected] 1071 Yanhai Tang Institute of Bio-Mechanical Electronic Engineering, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1072 Yanhao Li Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1073 Yankun Peng College of Engineering, China Agricultural University, Beijing, China [email protected] 1074 Yanlei Yu Zhejiang Gongshang University, Hangzhou, Zhejiang, China [email protected] 1075 Yanlin Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 1076 Yanqun Zhang China Institute of Water Resources and Hydropower Research, Beijing, China 1077 Yanru Guo College of Food Science and Technology, Shanghai Ocean University, Shanghai, China [email protected] 1078 Yanru Zhao Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1079 Yanshui Zhao YTO Group Corporation, China [email protected] 1080 Yanwen Lu Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1081 Yanxiang Zhu Research center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 1082 Yanyao Wang Qingdao Agricultural University, Qingdao, Shandong, China [email protected] 1083 Yao Li Hohhot Vocational College, Hohhot, Inner Mongolia, China [email protected] 1084 Yao Wu Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 1085 Yaolun Zhang Faculty of Science and Technology, University of Macau, Macau, China [email protected] 1086 Yaoming Li Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 272 1087 Yapeng Li College of Mechanical Engineering, Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected] 1088 Yaqin Li College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected] 1089 Yawei Ren Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 1090 Yawei Zhang College of Engineering, China Agricultural University, Beijing, China [email protected] 1091 Yazhe Wang Chinese Academy of Agricultural Mechanization Sciences, Beijing, China [email protected] 1092 Yeseong Kang Gyeongsang University, Republic of Korea [email protected] 1093 Yeseul Jo Seoul National University, Republic of Korea [email protected] 1094 Yi Zhang Institute of Environment and Sustainable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China [email protected] 1095 Yi Zhao China Agricultural University, Beijing, China [email protected] 1096 Yibao Ou Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected] 1097 Yibin Ying Faculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1098 Yi-Chich Chiu National Ilan University, Taiwan, China [email protected] 1099 Yichuan Gao Wuhan Institute of Agricultural Mechanization Sciences, Wuhan, Hubei, China [email protected] 1100 Yifan He College of Food Science and Nutritional Engineering, China Agricultural Engineering, Beijing, China [email protected] 1101 Yifei Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1102 Yikui Bai College of Engineering, Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 1103 Yimin Wei Institute of Agro-products Processing Science and Technology, Chinese Academy of Agricultural Sciences, Beijing, China [email protected] 1104 Yingchao Chen YTO Group Corporation, China [email protected] 1105 Yingchun Fu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1106 Yingda Fu College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 1107 Yingquan Zhang Institute of Agro-products Processing Science and Technology, Chinese Academy of Agricultural Sciences, Beijing, China zhangyingquan821@126. com 1108 Yingyi Chen College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 273 1109 Yingyu Liu School of Life Sciences and Engineering, Nanchang University, Nanchang, Jiangxi, China [email protected] 1110 Yinhong Kang College of Information and Engineering Technology, Sichuan Agricultural University, Ya'an, Sichuan, China [email protected] 1111 Yitao Liao College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 1112 Yitian Zang China Agricultural University, Beijing, China [email protected] 1113 Yiwei Dong Institute of Environment and Sustainable Development in Agriculture, China Academy of Agricultural Sciences, Beijing, China [email protected] 1114 Yixiang Zhang College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 1115 Yiyuan Ge College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected] 1116 Yong Wu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1117 Yong Zhao Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 1118 Yongchang Yu College of Mechanical Engineering, Henan Agricultural University, Zhengzhou, Henan, China [email protected] 1119 Yongcheng Jiang College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected] 1120 Yongchong Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1121 Yonghong Yu Jiamusi University, Jiamusi, Heilongjiang, China [email protected] 1122 Yong-Joo Kim Chungnam National University, Republic of Korea [email protected] 1123 Yongjun Zheng College of Engineering, China Agricultural University, Beijing, China [email protected] 1124 Yonglei Li Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 1125 Yongqian Ding Nanjing Agricultural University, Nanjing, Jiangsu, China [email protected] 1126 Yongqian Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1127 Yongqiang Cheng China Agricultural University, Beijing, China [email protected] 1128 Yongqing Du Gansu Bureau of Agricultural Mechanization Management, China [email protected] 1129 Yongsen Xiong Jinhua Polytechnic College, Jinhua, Zhejiang, China [email protected] 1130 Yongsheng Chen Nanjing Research Institute for Agriculture Mechanization, Ministry of Agriculture, Nanjing, Jiangsu, China [email protected] 1131 Yongwei Wang College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 274 1132 Yoshisuke Kishida Shin-Norinsha Co., Ltd, Japan [email protected] 1133 Youchun Ding College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 1134 Youqiang Shen Tianjin Tractor Manufacturing Corporation, Ltd., China [email protected] 1135 Yu Liu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1136 Yu Liu Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 1137 Yu Ru Nanjing Forestry University, Nanjing, Jiangsu, China [email protected] 1138 Yu Ya-xin Zhejiang Sci-Tech University, [email protected] 1139 Yu Zhang Graduate School of Agricultural and Life Sciences, University of Tokyo, Japan [email protected] 1140 Yuan Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1141 Yuanjun Fan College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 1142 Yubao Wang Northwest A&F University, Yangling, Shaanxi, China [email protected] 1143 Yubin Lan USDA-ARS, USA [email protected] 1144 Yue Gao Jilin University, Changchun, Jilin, China [email protected] 1145 Yue Guo Bureau of Agricultural Machinery, Department of Agriculture and Animal Husbandry, Inner Mongolia, China [email protected] 1146 Yue Yu Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1147 Yuebin Yan Anhui Institute of Agricultural Mechanization Sciences, China 1148 Yueming Yuan Jilin Agricultural University, Changchun, Jilin, China [email protected] 1149 Yueqin Liu College of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 1150 Yuexia Chen College of Vehicle and Traffic Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 1151 Yufei Jin Department of Marketing, Huiju China, Beijing, China [email protected] 1152 Yuhan Lin China Agricultural University, Beijing, China [email protected] 1153 Yuhuan Liu Nanchang University, Nanchang, Jiangxi, China [email protected] 1154 Yun Ding College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 1155 Yun Zhou China Agricultural University, Beijing, China [email protected] 1156 Yunpu Wang School of Life Sciences and Engineering, Nanchang University, Nanchang, Jiangxi, China [email protected] 275 1157 Yunwu Xiong China Agricultural University, Beijing, China [email protected] 1158 Yunxia Wang Nanjing Institute of Technology, Nanjing, Jiangsu, China [email protected] 1159 Yunxiang Ye Washington State University, USA [email protected] 1160 Yuqiu Song Shenyang Agricultural University, Shenyang, Liaoning, China [email protected] 1161 Yuxuan Tian College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1162 Yuying Yan University of Nottingham, UK [email protected]. 1163 Za Kan College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected] 1164 Zaichun Zhuang College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1165 Zarei Elmira College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1166 Zdenko Tkac Slovak University of Agriculture in Nitra, Slovakia [email protected] 1167 Zebing Xing Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 1168 Zeliha Bereket Barut Cukurova University, Faculty of Agriculture, Department of Agricultural Machinery, Adana, Turkey [email protected] 1169 Zengde Han Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected] 1170 Zengling Yang College of Engineering, China Agricultural University, Beijing, China [email protected] 1171 Zhandong Liu Farmland Irrigation Research Institute, Chinese Academy of Agricultural Sciences, Beijing, China [email protected] 1172 Zhanfeng Hou College of Mechanical and Electronic Engineering, Inner Mongolia Agricultural University, Hohhot, Inner Mongolia, China [email protected] 1173 Zhangbing Zhu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1174 Zhangying Ye College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1175 Zhanhua Song Shandong Agricultural University, Tai'an, Shandong, China [email protected] 1176 Zhanming Li College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1177 Zhanyong Li Tianjing University of Science and Technology, Tianjin, China [email protected] 1178 Zhaodong Li College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 276 1179 Zhaohua Hou Institute of Special Animal and Plant Sciences of China Academy of Agricultural Sciences, Changchun, Jilin, China [email protected] 1180 Zhaolei Zhang College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai'an, Shandong, China [email protected] 1181 Zhen Li Kyushu University, Japan [email protected] 1182 Zhen Li Beijing Research Center for Information Technology in Agriculture, Beijing, China [email protected] 1183 Zhen Li College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, China [email protected] 1184 Zhen Zhang Fujian Academy of Agricultural Mechanization Sciences, China [email protected] 1185 Zhenbang Wang Beijing Municipal Bureau of Agriculture, China [email protected] 1186 Zhenbo Li China Agricultural University, Beijing, China [email protected] 1187 Zhenbo Wei Faculty of Agriculture, Life and Environment Sciences, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1188 Zhendong Ke Gansu Academy of Agricultural Mechanization Sciences, Lanzhou, Gansu, China [email protected] 1189 Zheng Lou Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 1190 Zheng Ma Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 1191 Zheng Yan Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 1192 Zhengbin Zhao Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected] 1193 Zhengbo Zhu South China Agricultural University, Guangzhou, China [email protected] 1194 Zhenghe Song China Agricultural University, Beijing, China [email protected] 1195 Zhenhua Duan College of Engineering, Shanxi Agricultural University, Taigu County, Shanxi, China [email protected] 1196 Zhenjiang Zhou Department of Agro-ecology, Aarhus, Denmark [email protected] 1197 Zhenwei Liang Institute of Agricultural Engineering, Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 1198 Zhenxiang Xing C o l l e g e o f Wa t e r C o n s e r v a n c y a n d C i v i l Engineering, Northeast Agricultural University, Harbin, China 1199 Zhenxin Zhang Chinese Society for Agricultural Machinery, China [email protected] 1200 Zhenzhen Pang Hainan University, Haikou, Hainan, China [email protected] 1201 Zhi Qu College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 277 1202 Zhi Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1203 Zhi Zhang College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 1204 Zhifen Di Chinese Academy of Agricultural Engineering, Beijing, China [email protected] 1205 Zhigang Wang Jilin University, Changchun, Jilin, China [email protected] 1206 Zhigang Zhang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 1207 Zhihua Cheng College of Engineering, China Agricultural University, Beijing, China [email protected] 1208 Zhihui Gao College of Biological and Agricultural Engineering, Jilin University, Changchun, Jilin, China [email protected] 1209 Zhijie Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1210 Zhi-Ming Guo Intelligent Detection Department, National Engineering Research Center for Information Technologies in Agriculture, China [email protected] 1211 Zhiming Lu College of Information Science and Engineering, Shanxi Agricultural University, Taigu, Shanxi, China [email protected] 1212 Zhiming Wang Jinhua Polytechnic College, Jinhua, Zhejiang, China [email protected] 1213 Zhining Wang China Agricultural University, Beijing, China [email protected] 1214 Zhiping Di College of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia, China [email protected] 1215 Zhiqi Zheng College of Engineering, China Agricultural University, Beijing, China [email protected] 1216 Zhiqiang Xi Vehicle & Transportation Engineering Institute, Henan University of Science and Technology, Luoyang, Henan, China [email protected] 1217 Zhiwei Liu South China University of Technology, Guangzhou, China [email protected] 1218 Zhiwei Zhu South China University of Technology, Guangzhou, China [email protected] 1219 Zhiyan Zhou Agriculture and Aviation Engineering Center, South China Agricultural University, Guangzhou, China [email protected] 1220 Zhiyong Zou College of Mechanical and Electronic Engineering, Sichuan Agricultural University, Ya'an, Sichuan, China [email protected] 1221 Zhiyuan Sun College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1222 Zhong Han Institute of Modern Food Engineering, South China University of Technology, Guangzhou, China [email protected] 1223 Zhong Zhou College of Mechanical and Electrical Engineering, Nanjing Forestry University, Nanjing, Jiangsu, China [email protected] 278 1224 Zhongjia Chen Beijing Forestry University, Beijing, China [email protected] 1225 Zhongli Pan Department of Biological and Agricultural Engineering, University of California, Davis (UC Davis) [email protected] 1226 Zhongliang Zhao Heilongjiang Institute of Agricultural Mechanical Engineering Science, Harbin, Heilongjiang, China [email protected] 1227 Zhongwei Liang College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 1228 Zhongxiang Zhu China Agricultural University, Beijing, China [email protected] 1229 Zhou Fan College of Engineering, Huazhong Agricultural University, Wuhan, Hubei, China [email protected] 1230 Zhou Haibo College of Mechanical Engineering, Jiamusi University, Jiamusi, Heilongjiang, China [email protected] 1231 Zhou Yang College of Engineering, South China University of Technology, Guangzhou, Guangdong, China [email protected] 1232 Zhuang Wang Jiangsu University, Zhenjiang, Jiangsu, China [email protected] 1233 Zhuo Li College of Water Resources and Civil Engineering, China Agricultural University, Beijing, China [email protected] 1234 Zhuqing Ding College of Mechanical and Electronic Engineering, Shihezi University, Shihezi, Xinjiang, China [email protected] 1235 Zihao Liu College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, Zhejiang, China [email protected] 1236 Ziyang Wang College of Information and Electrical Engineering, China Agricultural University, Beijing, China [email protected] 1237 Zunfeng Tang Modern Agricultural Equipment Co., Ltd., Beijing, China [email protected] 1238 Zuoxi Zhao College of Engineering, South China Agricultural University, Guangzhou, Guangdong, China [email protected] 1239 Zusongying Zhao College of Engineering, China Agricultural University, Beijing, China [email protected] 279