docfilter housings filter housings
download 
Report Transcription
filter housings filter housings
F I LT E R HOUSINGS #20 Blue #10 Blue #10 Clear #5 Blue #20 Blue #5 Clear SLIM LINE™ HOUSINGS #20 Blue MB • Slim design reduces space required for installation without sacrificing capacity • FDA grade • Optional pressure-relief/bleeding button on inlet side of cup • Leak-proof seating with top-seated Buna-N O-ring • Available with clear and opaque sumps #10 Blue MB #10 Blue 1” Big Blue #10 Clear MB ® 20” • Large capacity housing suitable for high flow applications S TA N D A R D H O U S I N G S • Available in 10” and 20” sizes to meet • Ideal for a wide range of applications including residential, your needs commercial and industrial • Optional pressure-relief/bleed button on inlet • Available in 10” and 20” sizes to meet your needs side of cup • Optional pressure-relief/bleed button on inlet side of cup • Thick wall for increased strength • Leak-proof seating with top-seated Buna-N O-ring • Accepts 4 1” Big Blue ® 1/2” diameter cartridges 10” • Available with clear and opaque sumps BIG BLUE ® HOUSINGS 605 Denison Street, Markham, Ontario, Canada L3R 1B8 Tel: 905-944-9465 1-888-830-5776 Fax: 905-944-0504 Email: [email protected] F I LT E R CARTRIDGES S1-20BB S1-20 S1 S1-BB S-1 SERIES PLEATED CELLULOSE SEDIMENT • Pleated design maximizes dirt-holding capacity • Designed for general water filtration purposes • Economically priced • Nominal 20-micron rating Materials of Construction • Filter Media: Resin Impregnated Cellulose • End Caps: Vinyl Plastisol • Core: Polypropylene DGD-5005 DGD-2501 • Netting: Polyethylene DGD-5005-20 DGD-2501-20 • Temperature Rating: 40°F to 145°F (4.4°C to 63°C) DGD SERIES DUAL-GRADIENT DENSITY • Manufacturing from pure 100% pure polypropylene • Manufacturing from pure 100% polypropylene • Designed for purity, with bacteria and chemical P5-20 resistance • Designed for purity, bacteria and chemical resistance • Spun fibers form a true gradient density from outer to • Two separate gradient density layers enhance inner surfaces cartridge performance • Three times the dirt-holding capacity of similar-sized P1 Materials of Construction sediment cartridges • Filter Media: Polypropylene Fibers • Temperature Rating: 40°F to 145°F (4.4°C to 63°C) Materials of Construction P5-478 • Filter Media: Polypropylene P5 • Temperature Rating: 40°F to 145°F (4.4°C to 63°C) P5-30 P SERIES SPUN=BONDED POLYPROPYLENE 605 Denison Street, Markham, Ontario, Canada L3R 1B8 Tel: 905-944-9465 1-888-830-5776 Fax: 905-944-0504 Email: [email protected] F I LT E R CARTRIDGES • Quality polypropylene filter media • Will not impart taste, odor or colour • Superior chemical resistance. Not prone to bacterial attack • Compatible with a wide range of industrial filtration POLYDEPTH™ Polypropylene Sediment Cartridge • Available in a wide range of micron ratings and lengths Materials of Construction • Filter Media: Polypropylene • Temperature Rating: 40°F to 175°F (4.4°C to 79.4°C) PD-1-934 PD-5-934 PD-1-20 PD-5-20 POLTDEPTH™ POLYPROPYLENE SEDIMENT C1-20 C1-20BB C8 GAC-20 GAC-20BB C2 GAC-10 C1 C SERIES DUAL PURPOSE POWDERED-ACTIVATED CARBON GAC-5 • Economically priced • Provides sediment filtration and taste, odor and chlorine reduction GAC-BB • High dirt-holding capacity GAC SERIES GRANULAR ACTIVATED CARBON • Available in four sizes and two micron ratings • Effective taste, odor and chlorine reduction • Designed for maximum adsorption Materials of Construction • Post-filter to reduce carbon fines • Filter Media: PAC Impregnated Cellulose • Available in variety of sizes and flow rates • End Caps: Polypropylene (C8) Vinyl Plastisol (C1 and C2) Materials of Construction • Core: Polypropylene • Filter Media: Granular-Activated Carbon • Netting: Polyethylene • End Caps: Spun Polypropylene • Backing: Polyester (C8) Cellulose Polyester (C1 & C2) • Post-filter: Polypropylene • Gasket: Buna-N (C8) (Optional EPR Gaskets) • Outer Casting: Polyester • Temperature Rating: 40°F to 145°F (4.4°C to 63°C) (C8) • Expansion Pad: Polyester 40°F to 125°F (Others) • Gasket: Buna-N (top) Santoprene (bottom) • Temperature Rating: 40°F to 125°F (4.4°C to 53°C) 605 Denison Street, Markham, Ontario, Canada L3R 1B8 Tel: 905-944-9465 1-888-830-5776 Fax: 905-944-0504 Email: [email protected] EP-20-BB • High-dirt-holding tolerance maximizes utilization of the carbon block EP-20 • Greater chlorine removal capacity than competitive 10-micron carbon block • Nominal 5-micron rating Materials of Construction • Filter Media: Bonded PAC CBC-20BB • End Caps: Polypropylene • Neting: Polypropylene CBC-20 • Inner/Outer Wrap: Polypropylene • Gasket: Buna-N • Temperature Rating: 40°F to 180°F (5°C to 83°C) EP-10 EP-BB EP SERIES CARBON-BRIQUETTE CBC-BB CBC-5 CBC-10 CBC SERIES CARBON-BRIQUETTE • Reduces taste, odor, chlorine and certain VOCs from drinking water • Effective at filtering Cryptosporidium and Giardia cysts • High capacity chlorine reduction • Nominal 0.5-micron rating CCBR2-10 Materials of Construction • Filter Media: Bonded PAC CBR2-10R • End Caps: Polypropylene • Neting: Polypropylene CBR2-10 • Inner/Outer Wrap: Polypropylene CBR2 SERIES CARBON-BRIQUETTE MULTIMEDIA • Temperature Rating: 40°F to 180°F (5°C to 83°C) • Highly effective chlorine reduction through more than 20,000 gallons • Lead reduction through 2000 gallons • 99.95% reduction of Cryptosporidium and Giardia cysts • Nominal 0.5-micron sediment filtration Materials of Construction • Filter Media: Bonded PAC • End Caps: Polypropylene • Neting: Polypropylene F I LT E R CARTRIDGES • Outer Wrap: Polypropylene • Gaskets: Buna-N • Temperature Rating: 40°F to 180°F (5°C to 83°C) 605 Denison Street, Markham, Ontario, Canada L3R 1B8 Tel: 905-944-9465 1-888-830-5776 Fax: 905-944-0504 Email: [email protected]
