P R O D U C T C A T A L O G

Transcription

C A T A L O G
www.buckchuck.com
P R O D U C T
If a chuck’s a chuck, then…
Why a Buck?
Depth in Experience, Unparalleled Service and Price to Performance.
That’s Why!
ATSC 3 & 6-Jaw Ajust-Tru® Scroll Chuck
Air Operated High Precision Power Chuck
4-Jaw Independent Chuck
Direct OEM Replacement Power Chuck
Super Life Power Chuck
Our chucks offer the quality and performance you have come to expect from Buck Chuck.
Quality like this comes with over 75 years of experience and unparalleled customer service.
That's why you want a Buck!
Table of Contents
Page
General Info
Replacing Your Obsolete Buck Chuck – Crossover Sheet ...................................................................................................... 4
Chuck Selection................................................................................................................................................................. 5
Parts Breakdown................................................................................................................................................................ 6
Spindle Identification ......................................................................................................................................................... 8
ATSC Manual Scroll Chucks Ajust-Tru® Style
3 and 6-Jaw Forged Steel Scroll Chuck Hardened Top Reversible Jaw................................................................................. 10
3 and 6-Jaw Forged Steel Scroll Chuck Hardened Solid Jaw............................................................................................... 11
4-Jaw Forged Steel Scroll Chuck Hardened Top Reversible Jaw ......................................................................................... 12
5C Adapted 3 or 6-Jaw Forged Steel Scroll Chuck Hardened Top Reversible or Solid Jaw .................................................... 12
ATSC Mounting Plates...................................................................................................................................................... 13
BVC Manual Scroll Chucks Ajust-Tru® Style
3 and 6-Jaw Semi-Steel Scroll Chuck Hardened Top Reversible Jaw................................................................................... 16
BVC Mounting Plates........................................................................................................................................................ 17
Independent Chucks
4-Jaw Independent Chuck................................................................................................................................................ 20
Independent Mounting Plates............................................................................................................................................ 21
A1 & A2 4-Jaw Independent Direct Mount Chuck............................................................................................................... 22
D1 4-Jaw Independent Direct Mount Chuck....................................................................................................................... 23
Power Chucks
SPAC Air Operated High Precision Power Chuck................................................................................................................. 25
3-Jaw Air Operated Power Chuck...................................................................................................................................... 26
3-Jaw Stationary Self Contained Closed Center Power Chuck ............................................................................................ 27
2-Jaw High-Speed Thru-Hole Draw Tube Operated Power Chuck........................................................................................ 28
2-Jaw High-Speed Closed Center Drawbar Operated Power Chuck..................................................................................... 33
3-Jaw High-Speed Closed Center Drawbar Operated Power Chuck..................................................................................... 33
Stationary Hydraulic/Pneumatic Super-Life Power Chuck ................................................................................................... 36
Hydraulic Super-Life Power Chuck..................................................................................................................................... 37
2/3-Jaw Combination Super Life Power Chuck.................................................................................................................. 38
Pull-Back Power Chuck ................................................................................................................................................... 39
Buck Forkardt Quick Change Chucks............................................................................................................................ 40
Tork-Lok Arbors and Collets
Installation and Operating Instructions............................................................................................................................... 42
Arbor Applications............................................................................................................................................................ 43
Drawbar Models Long Series............................................................................................................................................ 44
Drawbar Models Short Series............................................................................................................................................ 45
Long Series Collets.......................................................................................................................................................... 46
Short Series Collets.......................................................................................................................................................... 48
Replacement Components................................................................................................................................................ 50
Air-Operated Models........................................................................................................................................................ 50
Manual Fixtures............................................................................................................................................................... 51
Obsolete Chuck Crossover
AT+ MODELS
4
AT MODELS
AT+ Model #
AT+ Part #
A
3AT+4
B
A0100176977
Replacement Part #
C
B8043S
6AT+4
A0100211977
B8046S
3AT+5
A0100177977
B8053S
6AT+5
A0100212977
B8056S
3AT+6
A0100178977
B8063S
6AT+6
A0100213977
B8066S
3AT+6R
A0100178978
B8063
6AT+6R
A0100213978
B8066
3AT+8
A0100179977
B8083S
6AT+8
A0100214977
B8086S
3AT+8R
A0100179978
B8083
6AT+8R
A0100214978
B8086
3AT+10
A0100180977
B8103S
6AT+10
A0100215977
B8106S
3AT+10R
A0100180978
B8103
6AT+10R
A0100215978
B8106
3AT+12
A0100181977
B8123S
6AT+12
A0100216977
B8126S
3AT+12R
A0100181978
B8123
6AT+12R
A0100216978
B8126
3AT+15R
A0100182978
B8153
6AT+15R
A0100217978
B8156
AT Model #
AT Serial #
AT Part #
A
3AT4
B
A1434
C
1434
Replacement
Part #
D
B8043S**
6AT4
A1462
1462
B8046S**
3AT5
A2535
2535
B8053S**
6AT5
A2562
2562
B8056S**
3AT6
A0002063003
3634
B8063S**
6AT6
A0002066003
3662
B8066S**
3AT6R
A0002063002
2063R
B2063R
6AT6R
A0002066002
2066R
B2066R
3AT8
A0002083003
4831
B8083S**
6AT8
A0002086003
4862
B8086S**
3AT8R
A0002083002
2083R
B2083R
6AT8R
A0002086002
2086R
B2086R
3AT10
A0002103003
5103
B8103S**
6AT10
A0002106003
5106
B8106S**
3AT10R
A0002103002
2103R
B2103R
6AT10R
A0002106002
2106R
B2106R
3AT12
A0002124003
5124
B8123S**
6AT12
A0002127003
5127
B8126S**
3AT12R
A0002124002
2124R
B2124R
6AT12R
A0002127002
2127R
B2127R
3AT15R
A0002154002
2154R
B2154R
6AT15R
A0002157002
2157R
B2157R
AT+ MODEL CHUCKS
The chart above refers to the replacement options for the
obsolete AT+ model of chucks. The ATSC was designed as
a replacement for this chuck – the components are not
interchangeable but the ATSC can be mounted to the
existing adapter plate from your AT+ chuck.
AT MODEL CHUCKS
The chart above refers to the replacement options for the
obsolete AT model of chucks. The BVC was designed as a
replacement for this chuck – the components are not
interchangeable, but the BVC can be mounted to the
existing adapter plate from your AT chuck.
If you currently have an AT+ with any of the numbers in
column A or B, it is replaced by a chuck in column C.
Please contact us at 1-800-228-BUCK for more
information.
If you currently have an AT with any of the numbers in
column A, B or C, it is replaced by a chuck in column D.
** Parts do not have a direct replacement but there are
alternate replacement options available that may require
you to purchase a new adapter plate. Please contact us at
1-800-228-BUCK for more information.
Chuck Selection
How do you determine what type of chuck and mounting
plate is required for the application?
What type of jaw is needed?
• The most common are the top reversible jaws. These can be
used for both I.D. or O.D. work and production work
• 2-piece jaw chucks can be adapted to soft jaws or special
top tooling
• Solid jaws are typically used for tool room applications
What size of chuck?
• For scroll chucks, do not exceed the swing diameter over the
cross slide
• For independent chucks, the next larger size may work
What accuracy and repeatability is required?
• High precision – the ATSC chucks provide .0005 TIR on
duplicate parts
• General I.D. or O.D. work – the BVC chucks provide .001 TIR on
duplicate parts
What mounting is needed?
• Determine spindle type using the spindle identifier on page 8
• Measure the major diameter of the taper and match to the chart
for the spindle type (page 8)
• For threaded spindles, you will need to measure threads per inch
How many jaws are required?
• 2-Jaw – special applications
• 3-Jaw – conventional machining
• 4-Jaw – square and offset work
• 6-Jaw – 2nd operation or thin wall parts
ATSC
APPLICATIONS:
• Precision machining
• Large quantity productions
• Higher RPM needs
4-JAW
INDEPENDENT
BVC
APPLICATIONS:
• Tool room applications
• Grinding
APPLICATIONS:
• Grinding
• Odd-shaped parts
1-800-228-BUCK
www.BuckChuckUSA.com
5
Parts Breakdown
10
16
14
7
15
11
13
5
1
3
4
8
ATSC
No.
6
2
Name of parts
1
Chuck Body
2
Back Cover
3
Top Jaw
4
Master Jaw
5
Pinion
6
Back Cover
7
T-Handle (accessory)
8
Stud Bolt
9
Hexagon Socket Head Cap Screw
10
Grease Nipple
11
Chuck Mounting Bolt (accessory)
12
Adjust Screw
13
Spring (accessory)
14
Hexagon Pin Spanner (accessory)
15
Jaw Mounting Bolt
16
17
6
12
17
9
Parts Breakdown
13
11
5
4
12
2
8
3
9
BVC
No.
Name of parts
1
Chuck Body
2
Back Cover
3
Scroll Plate
4
Pinion
5
Pinion Screw
6
Hard Master Jaw
7
Hard Top Jaw
8
Grease Nipple
9
Chuck Mounting Bolts
10
Back Cover Mounting Bolts
11
Chuck Wrench with Safety Spring
12
Back Cover Locating Pin
13
Back Cover Mounting Bolt
14-15
Top Jaw Mounting Bolts
16
Fine Adjustment Screws
16
10
1
14
15
6
7
NOTE: 10"-15" BVC Chucks have alternate parts.
Please contact our sales office for more information.
1-800-228-BUCK
7
Spindle Identification
For Mounting Plates
SPINDLE TYPE A1 & A2
"C"
"E1"
"E2"
"F2"
"F1"
"B"
"A"
7°7'30"
Spindle nose
A
B
C (MAX)
A-4
2.500
0.437
7/16”-14
3.250
-----
A-5
3.251
0.563
7/16”-14
4.125
2.437
A-6
4.188
0.625
1/2”-13
5.250
3.250
E1 & E2
F1
F2
A-8
5.501
0.688
5/8”-11
6.750
4.375
A-11
7.751
0.750
3/4”-10
9.250
6.500
A-15
11.251
0.813
7/8”-9
13.000
9.750
A-20
16.251
0.875
1”-8
18.250
14.500
A-28
23.001
1.000
1-1/4”-7
25.500
10.438
KEY
L SPINDLE TYPE LONG TAPER KEY DRIVE
"A"
"B"
8°17'50"
Spindle nose
A
THREAD
B
C
KEY
L00
3-3/4”-6
2.000
3/8 X 3/8 X 1-1/2
L0
4-1/2”-6
2.375
3/8 X 3/8 X 1-3/4
L1
6”-6
2.875
5/8 X 5/8 X 2-3/8
L2
7-3/4”-5
3.375
3/4 X 3/4 X 2-7/8
L3
10-3/8”-4
3.875
1.00 X 1.00 X 3-1/4
"C"
THREADED SPINDLE TYPE
Spindle nose thread
A
1”-8
1”-10
"A"
1-1/2”-8
1-3/4”-8
2-1/4”-8
2-3/8”-6
2-3/4”-8
D1 CAMLOCK SPINDLE TYPE
"C"
"E"
"F"
"B"
7°7'30"
8
"A"
Spindle nose
A
B
C (MAX)
CAMSTUD
DIA “E”
F
D1-3
2.125
0.437
9/16
2.782
D1-4
2.500
0.437
5/8
3.250
D1-5
3.251
0.500
3/4
4.125
D1-6
4.188
0.625
7/8
5.250
D1-8
5.501
0.688
1
6.750
D1-11
7.751
0.750
1-3/16
9.250
D1-15
11.251
0.813
1-3/8
13.000
ATSC MODEL
• Precision machining
• Large quantity productions
• Higher RPM needs
Forged Steel Body Scroll Chuck
Model ATSC Hardened Top Reversible Jaws
CHUCK SHIPS COMPLETE WITH:
• Master and hardened top reversible jaws
• Spring loaded T-wrench
• Allen wrench
• Mounting bolts
FEATURES & BENEFITS:
• 4 micro-fine adjustment screws allow .0005” TIR repeatability
• High-quality forged steel body construction allows for higher lathe speeds
• Hardened and ground scroll is precision balanced, allowing longer life and
greater accuracy
• Hardened jaws and pinions increase life of the chuck
• American standard tongue & groove master jaws allow for greater
flexibility in choice of top tooling
3-JAW
ATSC W/MASTER & HARDENED TOP REVERSIBLE JAWS
A
B
C
D
6.50
2.76
4.92
5.51
1.78 0.48
M10x1.5P
2.58 1.00 1.54 0.35 0.31 M10x1.5P
1.69
Gripping Dia. (in.) Max Wt.
RPM Lb.
EXT.
INT.
5/16 0.31-5.51 2.17-5.91 4600 23
M10x1.5P
Dia. Part No.
*6"
B8063
E
F
G
H
J
K
L
M
N
P
Q
8"
B8083
7.87
3.15
6.30
6.93
2.37 0.48
3.57 1.25 2.05 0.43 0.31 M10x1.5P
1.75
3/8 0.39-7.87 2.17-7.09 4000
37
10"
B8103
10.04 3.58
7.87
8.82
3.23 0.50 M12x1.75P 3.75 1.50 2.59 0.47 0.31 M10x1.5P
2.13
1/2 0.47-9.45 3.35-8.86 3000
69
12"
B8123
12.60 3.90 10.24 11.26 4.14 0.58
M16x2P
4.41 1.75 2.57 0.55 0.35 M12x1.75P 2.50
1/2 0.71-11.22 4.92-11.22 2300 110
15"
B8153
15.74 4.96 12.99 14.25 5.51 0.59
M16x2P
5.55 2.50 3.61 0.67 0.35 M12x1.75P 3.00
3/4 0.79-14.17 5.12-14.17 1800 246
Measurements in inches unless otherwise indicated.
6-JAW
Dia. Part No.
10
*6"
B8066
A
B
C
D
E
F
G
6.50
2.76
4.92
5.51
1.78 0.48
M10x1.5P
M10x1.5P
Gripping Dia. (in.)
EXT.
INT.
Max
RPM
Wt.
Lb.
2.58 1.00 1.54 0.35 0.31 M10x1.5P 1.69
5/16 0.98-5.51 2.95-5.91 3450
23
H
J
K
L
M
N
P
Q
8"
B8086
7.87
3.15
6.30
6.93
2.37 0.48
3.57 1.25 2.05 0.43 0.31 M10x1.5P 1.75
3/8 0.79-7.87 2.56-7.09 3000
40
10"
B8106
10.04 3.58
7.87
8.82
3.23 0.50 M12x1.75P 3.75 1.50 2.59 0.47 0.31 M10x1.5P 2.13
1/2 0.98-9.45 3.54-8.86 2250
73
12"
B8126
12.60 3.90 10.24 11.26 4.14 0.58
M16x2P
4.41 1.75 2.57 0.55 0.35 M12x1.75P 2.50
1/2 1.57-11.22 4.53-11.22 1725 117
15"
B8156
15.75 4.96 12.99 14.25 5.51 0.59
M16x2P
5.55 2.50 3.61 0.67 0.35 M12x1.75P 3.00
3/4 1.57-14.17 5.12-14.17 1350 253
*6” chuck jaws are not ANSI standard – please contact us for details.
Model ATSC Hardened Solid Jaws
• Hardened and ground scroll is precision balanced, allowing longer life and greater accuracy
• Hardened solid jaws allow for smaller gripping ranges as opposed to 2-piece jaw chucks
• Inside and outside gripping solid jaws
• Allen wrench
• Mounting bolts
3-JAW
ATSC W/INSIDE & OUTSIDE SOLID JAWS
A
B
C
D
E
F
G
Gripping Dia. (in.)
EXT.
INT.
Max
RPM
Wt.
Lb.
M8x1.25P
0.08-2.76
0.98-2.95
6300
9
1.88 0.63 0.80 0.32 0.26
M8x1.25P
0.08-3.54
1.42-3.74
5500
13
2.52 0.74 0.96 0.35 0.31
M10x1.5P
0.12-5.51
2.05-5.71
4600
23
3.50 0.95 1.37 0.43 0.31
M10x1.5P
0.16-6.30
2.36-6.69
4000
39
3.62 1.23 1.83 0.47 0.31
M10x1.5P
0.24-8.27
2.95-8.66
3000
72
Dia.
Part No.
4"
B8043S
4.07 2.38 2.80
3.53 1.04 0.42
M5x0.8P
1.62 0.44 0.75 0.24 0.24
5"
B8053S
5.20 2.54 3.74
4.25 1.28 0.41
M8x1.25P
6"
B8063S
6.50 2.76 4.92
5.51 1.78 0.48
M10x1.5P
8"
B8083S
7.87 3.15 6.30
6.93 2.37 0.48
M10x1.5P
10"
B8103S 10.04 3.58 7.87
8.82 3.23 0.50
M12x1.75P
12"
B8123S 12.60 3.90 10.24 11.26 4.14 0.58
M16x2P
H
J
K
L
M
N
4.25 1.48 1.75 0.55 0.35 M12x1.75P
0.39-10.04 3.35-9.94
2300 115
6-JAW
ATSC W/INSIDE & OUTSIDE SOLID JAWS
Dia. Part No.
A
B
C
D
E
F
G
H
J
K
L
M
N
Gripping Dia. (in.)
EXT.
INT.
Max
RPM
Wt.
Lb.
4"
B8046S 4.07 2.36 2.80
3.53
1.04 0.42
M5x0.8P
1.62 0.41 0.75 0.24 0.24
M8x1.25P
0.08-2.76
0.98-2.95
4725
9
5"
B8056S 5.20 2.54 3.80
4.25
1.28 0.41
M8x1.25P
1.88 0.63 0.80 0.32 0.26
M8x1.25P
0.08-3.54
1.42-3.74
4125
14
6"
B8066S 6.50 2.76 4.92
5.51
1.78 0.48
M10x1.5P
2.52 0.74 0.96 0.35 0.31
M10x1.5P
0.24-5.51
2.36-5.71
3450
25
8"
B8086S 7.87 3.15 6.30
6.93
2.37 0.48
M10x1.5P
3.50 0.95 1.37 0.43 0.31
M10x1.5P
0.39-6.30
2.76-6.69
3000
44
10" B8106S 10.04 3.58 7.87
8.82
3.23 0.50
M12x1.75P
3.62 1.23 1.83 0.47 0.31
M10x1.5P
0.59-8.27
2.76-8.66
2600
80
12" B8126S 12.60 3.90 10.24 11.26 4.14 0.58
M16x2P
4.25 1.48 1.75 0.55 1-800-228-BUCK
0.35 M12x1.75P
0.79-10.04
3.35-9.94 1725 117
11
Model ATSC Hardened Top Reversible Jaws
• Hardened and ground scroll is precision balanced, allowing longer life and
greater accuracy
• American standard tongue & groove master jaws allow for greater
flexibility in choice of top tooling
• Allen wrench
• Mounting bolts
**Please note that this is a SCROLL chuck. All jaws move together, NOT
independently (if you need an independent chuck, see page 20).
4-JAW
*6" B8064
6.50 2.76 4.92
Gripping Dia. (in.) Max Wt.
RPM Lb.
EXT.
INT.
5.51 1.78 0.48 M10x1.5P 2.58 1.00 1.54 0.35 0.31 M10x1.5P 1.69 5/16 0.31-5.51 2.17-5.91 4600 23
8"
7.87 3.15 6.30
6.93 2.37 0.48 M10x1.5P 3.57 1.25 2.05 0.43 0.31 M10x1.5P 1.75 7/8 0.39-7.87 2.17-7.09 4000 38
10" B8104 10.04 3.58 7.87
8.82 3.23 0.50 M12x1.75P 3.75 1.50 2.59 0.47 0.31 M10x1.5P 2.13 1/2 0.47-9.45 3.35-8.86 3000 71
Dia. Part No.
B8084
A
B
C
D
E
F
G
12" B8124 12.60 3.90 10.24 11.26 4.14 0.58
M16x2P
H
J
K
L
M
N
P
Q
4.41 1.75 2.57 0.55 0.35 M12x1.75P 2.50 3/4 0.71-11.22 4.92-11.22 2300 130
• Hardened and ground scroll is precision balanced, allowing longer life and greater accuracy
• Used in tail stocks for jobs where centers cannot be used
• Adapter does not rotate
CHUCK SHIPS COMPLETE WITH: Jaws • 5C adapter
• Spring loaded T-wrench • Allen wrench • Mounting bolts
3/6-JAW
5C ADAPTED AJUST-TRU® CHUCKS
12
Part #
Jaw Style
Chuck Dia.
(in.)
Chuck Body
Height (in.)
Shank
Flange
(in.)
Adapter Hole Dia
(in.)
Adapter
Length (in.)
Thread
B8043S-5C
Solid 3-Jaw
4.07
2.38
5C
4
0.866
4.41
11/4-20
B8053S-5C
Solid 3-Jaw
5.20
2.54
5C
5
0.866
4.41
11/4-20
B8063S-5C
Solid 3-Jaw
6.50
2.76
5C
6
0.866
4.41
11/4-20
B8046S-5C
Solid 6 -aw
4.07
2.38
5C
4
0.866
4.41
11/4-20
B8056S-5C
Solid 6-Jaw
5.20
2.54
5C
5
0.866
4.41
11/4-20
B8066S-5C
Solid 6-Jaw
6.50
2.76
5C
6
0.866
4.41
11/4-20
* *B8063-5C
* *B8066-5C
2 pc 3-Jaw
6.50
2.76
5C
6
0.866
4.41
11/4-20
2 pc 6-Jaw
6.50
2.76
5C
6
0.866
4.41
11/4-20
* *B8064-5C
2 pc 6-Jaw
6.50
2.76
5C
6
0.866
4.41
11/4-20
Chuck dimensions can be found on pages 10 and 11.
ATSC Scroll Chuck Mounting Plates
Adapt to all 3, 6 & 4-Jaw ATSC Models and AT+ Models
AMERICAN STANDARD • STYLE A1 & A2
Chuck Size
Spindle
Size
4
5
6
8
10
12
3
A4-A3
A5-A3
A6-A3
-
-
-
4
-
A5-A4
A6-A4
A8-A4
-
-
5
-
-
A6-A5
A8-A5
A10-A5
-
-
6
-
-
A6-A6
A8-A6
A10-A6
A12-A6
-
8
-
-
A6-A8
A8-A8
A10-A8
A12-A8
A15-A8
11
-
-
-
-
-
A12-A11
A15-A11
12
15
15
-
AMERICAN STANDARD • STYLE D1 CAMLOCK
Chuck Size
Spindle
Size
4
5
6
8
10
3
A4-D3
A5-D3
A6-D3
-
-
-
4
-
A5-D4
A6-D4
A8-D4
-
-
-
5
-
-
A6-D5
A8-D5
A10-D5
-
-
6
-
-
A6-D6
A8-D6
A10-D6
A12-D6
-
8
-
-
A6-D8
A8-D8
A10-D8
A12-D8
A15-D8
11
-
-
-
-
-
A12-D11
A15-D11
HARDINGE 4 DEGREE TAPER MOUNTING PLATES
Chuck Size
5
6
Id #
A5-4DEG
A6-4DEG
Mounting Plates for Hardinge Lathes
HARDINGE 2 3/16"-10 THREADED MOUNTING PLATES
Chuck Size
5
6
Id #
A100451000
A100452000
See Spindle Identification on page 8 to determine the correct mounting plate needed.
1-800-228-BUCK
13
ATSC Scroll Chuck Mounting Plates
Adapt to all 3, 6 & 4-Jaw ATSC Models
AMERICAN STANDARD • LONG TAPER STYLE L
Chuck Size
Spindle
Size
6
8
10
12
15
L-00
A6-L00
A8-L00
A10-L00
–
–
L-0
A6-L0
A8-L0
A10-L0
A12-L0
–
L-1
–
A8-L1
A10-L1
A12-L1
A15-L1
L-2
–
–
–
A12-L2
A15-L2
L-3
–
–
–
–
A15-L3
THREADED MOUNTING PLATES
Chuck Size
Spindle
Size
4
5
6
8
10
12
1 1/2"-8
A100433000
A100434000
A100435000
–
–
–
1 3/4"-8
–
A100437000
A100438000
–
–
–
2 1/4"-8
–
–
A100439000
A100440000
A100441000
–
2 3/8"-6
–
–
A100442000
A100443000
A100444000
A100445000
2 3/4"-8
–
–
–
A100446000
A100447000
A100448000
5C MOUNTING PLATES
Chuck Size
Part No.
Shank
Length
Thread
4
A04-5C
5C
4”
0.866
4.41
1 1/4-20
A05-5C
5C
5”
0.866
4.41
1 1/4-20
6
A06-5C
5C
6”
0.866
4.41
1 1/4-20
Chuck Size
Part Number
HRT110
4"
A4-HRT110
HRT160
6"
A6-HRT160
HRT210
8"
A8-HRT210
HRT310
10"
A10-HRT310
14
Hole Dia.
5
HRT ROTARY TABLE PLATES
Spindle
Flange
BVC MODEL
• Grinding
Semi-Steel Body
Model BVC Hardened Top Reversible Jaws
• Semi-steel body is an affordable option for tool room applications
• American standard tongue & groove master jaws allow for
greater flexibility in choice of top tooling
• Mounting bolts
3-JAW
BVC W/MASTER & HARDENED TOP REVERSIBLE JAWS
Dia. Part No.
A
B
C
D
E
F
G1
G2
H
J
K
N
P
Q
Gripping Dia. (in.)
EXT. INT.
Max
RPM
Wt.
lb.
6” B2063R
6.00
2.35 3.13 5.34 1.54 0.69 5.34
–
2.64 0.98 1.63 M12x1.25 1.50 3/8 0.11-5.00 1.89-5.75
3000
19
8” B2083R
8.25
3.15 4.75 7.50 2.34 0.75 7.50
–
3.15 1.06 1.71 M12x1.25 1.75 3/8 0.15-7.80 2.13-6.77
2500
40
2000
66
10” B2103R 10.00 3.40 6.38 4.38 2.86 0.81
–
4.38 3.74 1.28 2.03 M18x1.50 2.13 1/2 0.51-9.37 2.95-8.70
12” B2124R 12.00 4.00 7.91 5.25 3.29 0.84
–
5.25 4.33 1.46 2.17 M18x1.50 2.50 1/2 0.51-11.30 3.27-10.12 1500 118
15” B2154R 15.00 5.78 11.78 6.75 4.25 1.13
–
6.75 5.00 1.65 2.54 M18x1.50 3.00 5/8 0.55-15.00 3.98-15.00 1000 233
6-JAW
BVC W/MASTER & HARDENED TOP REVERSIBLE JAWS
16
Dia. Part No.
A
6” B2066R
6.00
2.35 3.13 5.34 1.54 0.69 5.34
–
2.64 0.98 1.63 M12x1.25 1.50
8” B2086R
8.25
3.15 4.75 7.50 2.34 0.75 7.50
–
3.15 1.06 1.71 M12x1.25 1.75
B
C
D
E
F
G1
G2
H
J
K
N
P
Gripping Dia. (mm)
Max
RPM
Wt.
lb.
3/8 0.20-5.98 1.85-5.75
2500
25
3/8 0.39-8.00 2.13-6.73
2000
42
Q
EXT. INT.
10” B2106R 10.00 3.40 6.38 4.38 2.86 0.81
–
4.38 3.74 1.28 2.03 M18x1.50 2.13
1/2 0.63-9.33 2.95-8.70
1600
70
12” B2127R 12.00 4.00 7.91 5.25 3.29 0.84
–
5.25 4.33 1.46 2.17 M18x1.50 2.50
1/2 0.79-11.3 3.31-10.12 1100
122
BVC Scroll Chuck Mounting Plates
Adapt to all 3 & 6-Jaw BVC Models and Previous AT Models
Chuck Size
Spindle Size
6
8
10
12
15
A-3
B6-A3
–
–
–
–
A-4
B6-A4
B8-A4
–
–
–
A-5
B6-A5
B8-A5
B10-A5
–
–
A-6
B6-A6
B8-A6
B10-A6
B12-A6
–
A-8
–
B8-A8
B10-A8
B12-A8
B15-A8
A-11
–
–
–
B12-A11
B15-A11
AMERICAN STANDARD • STYLE D1 CAMLOCK
Spindle Size
Chuck Size
6
8
10
12
15
D-3
B6-D3
–
–
–
–
D-4
B6-D4
B8-D4
B10-D4
–
–
D-5
B6-D5
B8-D5
B10-D5
B12-D5
–
D-6
B6-D6
B8-D6
B10-D6
B12-D6
–
D-8
–
B8-D8
B10-D8
B12-D8
B15-D8
D-11
–
–
–
B12-D11
B15-D11
AMERICAN STANDARD • LONG TAPER STYLE L
Spindle Size
L-0
Chuck Size
6
8
10
12
15
B6-L0
B8-L0
B10-L0
B12-L0
–
L-1
–
–
B10-L1
B12-L1
B15-L1
L-2
–
–
–
B12-L2
B15-L2
1-800-228-BUCK
17
BVC Scroll Chuck Mounting Plates
Adapt to all 3 & 6-Jaw BVC Models and Previous AT Models
HARDINGE 4 DEGREE TAPER MOUNTING PLATES
Chuck Size
6"
Id #
B6-4
Mounting Plates for Hardinge Lathes
HARDINGE 2 3/16"-10 THREADED MOUNTING PLATES
Chuck Size
6"
Id #
B6-2 3/16"-10
5C MOUNTING PLATE
Chuck Size
Part No.
Shank
(D) Flange
Hole Dia.
Length
Thread
6”
B6-5C
5C
6”
0.866
4.41
1.24” x 20
HRT ROTARY TABLE PLATES
18
Spindle
Chuck Size
Part Number
HRT160
6"
B6-HRT160
HRT210
8"
B8-HRT210
HRT310
10"
B10-HRT310
4-JAW
INDEPENDENT
• Grinding
4-Jaw Independent Chucks
• 1 set of hard top jaws
• 1 set of hard master jaws
• 1 T-Wrench
• 1 L-Wrench for 40” & 50” chucks only
• 2 hex keys
• 2 eye bolts for chucks 10” & up
• 10” – 50” chucks are provided with
T-Slots
• Cast iron body
• Medium duty
• 4 independently moving jaws allow for gripping irregular shapes
• Adapters are available to fit most common spindles
• Comes standard with master and hard top reversible jaws – also
available in solid jaw
• Direct mount option also available
• 3” to 6” available in solid jaw only
• All sizes available in solid jaw
8" – 50" CHUCKS ONLY
4-JAW
Dia.
3"
4"
5"
6"
8"
10"
12"
15"
20"
25"
32"
40"
50"
Part #
IND1003S
IND1004S
IND1005S
IND1006S
IND1008R
IND1010R
IND1012R
IND1016R
IND1020R
IND1025R
IND1032R
IND1040R
IND1050R
A
3.25
4.00
5.00
6.25
8.00
10.00
12.50
15.75
20.00
25.00
31.50
40.00
50.00
B
2.60
3.31
4.25
3.74
3.74
4.13
5.25
6.75
9.25
9.25
11.81
14.57
19.69
C
2.17
2.84
3.74
2.56
2.96
5.91
6.89
7.87
10.63
10.63
9.84
12.60
15.75
D
0.87
0.98
1.18
1.77
2.21
2.56
3.15
3.93
4.92
6.30
8.27
10.24
12.01
E
1.65
2.13
2.21
2.56
2.95
3.35
3.74
4.13
4.72
5.51
5.71
5.91
6.50
F
–
–
–
–
1.83
2.38
2.40
2.85
3.56
8.85
3.69
4.69
4.69
G
–
–
–
–
0.24
0.28
0.38
0.40
0.47
0.47
0.47
0.60
0.60
H
–
–
–
–
1.75
2.13
2.50
3.00
3.00
3.00
3.00
3.00
3.00
M
M6
M8
M8
M10
M10
M12
M16
M16
M20
M20
M20
M20
M20
Max.
Hole (D)
0.87
0.98
1.18
1.77
2.28
2.65
3.89
4.62
6.27
7.09
8.27
10.24
12.01
Max.
RPM
4000
4000
3500
3200
1800
1500
1200
800
500
400
300
150
150
Weight
(lb.)
3.4
5.3
8
9
32
55
88
139
231
364
700
672
800
Max. Part
Weight (lb.)
33
33
330
550
1320
2220
3300
6600
9900
14300
18700
18700
20900
Max. Part Weight is calculated between centers.
20
Independent Mounting Plates
Chuck Size
Spindle Size
6
8
10
12
15
20
25
4
–
IND8-A4
–
–
–
–
–
5
INDF6-A5
INDF8-A5
IND10-A5
–
–
–
–
6
–
INDF8-A6
INDF10-A6 INDF12-A6
IND15-A6
–
–
8
–
–
IND10-A8
IND15-A8
INDF20-18
IND25-A8
11
–
–
–
IND12-A11 INDF15-A11 INDF20-A11
IND26-A11
INDF12-A8
Plates unfinished unless part number contains "F".
AMERICAN STANDARD • STYLE D CAMLOCK
Chuck Size
Spindle Size
6
8
10
12
15
20
25
4
INDF6-D4
INDF8-D4
–
–
–
–
–
5
IND6-D5
IND8-D5
IND10-D5
–
–
–
–
6
–
INDF8-D6
INDF10-D6
IND12-D6
IND15-D6
–
–
8
–
–
INDF10-D8
INDF12-D8
IND15-D8
IND20-D8
IND25-D8
11
–
–
–
IND12-D11
INDF15-D11
IND20-D11
IND25-D11
Plates unfinished unless part number contains "F".
AMERICAN STANDARD • LONG TAPER STYLE
Chuck Size
Spindle Size
6
8
10
12
15
20
L-00
IND6-L00
IND8-L00
L-0
IND6-L0
IND8-L0
IND10-L00
–
–
–
IND10-L0
IND12-L0
–
–
L-1
–
L-2
–
IND8-L1
IND10-L1
IND12-L1
IND15-L1
–
–
–
IND12-L2
IND15-L2
IND20-L2
L-3
–
–
–
–
IND15-L3
–
Plates unfinished only.
THREADED MOUNTING PLATES
Chuck Size
Spindle Size
1"-10
1 1/2"-8
4
5
6
8
10
12
IND4-110
–
–
–
–
–
IND4-1508 IND5-1508 IND6-1508 IND8-1508
2 3/16"-10
–
IND5-2316 IND6-2316
–
2 1/4"-8
–
IND5-2258 IND6-2258 IND6-2258
–
–
–
–
–
–
Plates unfinished only.
HARDINGE 4 DEGREE TAPER • FULLY FINISHED
5"
IND5-4DEG
6"
IND6-4DEG
See Spindle Identification on page 8 to
determine the correct mounting plate needed.
1-800-228-BUCK
21
Direct Mount Chucks
A1 & A2 4-Jaw Independent Chucks
• Cast iron body
• Medium duty
• Plain back chucks available
E
• 1 T-Wrench
• 2 hex keys
• T-slots provided in chucks 10" & up
F
G
7˚ 7’ 30”
A
H
B C D
M
TYPES A1 & A2
22
Dia.
Taper
Part #
A
B
C
D
E
F
G
H
M
8"
A2-5
IND8DM-A5
8.00
4.13
3.25
2.21
2.95
1.83
0.52
1.75
7/16-14 x 3 1/8
10"
A2-5
IND10DM-A5
10.00
4.13
3.25
2.95
3.35
2.38
0.52
2.13
7/16-14 x 3 1/8
10"
A2-6
IND10DM-A6
10.00
5.25
4.19
2.95
3.35
2.38
0.60
2.13
1/2-13 x 3 1/8
10"
A2-8
IND10DM-A8
10.00
6.75
5.50
2.95
3.35
2.38
0.71
2.13
5/8-11 x 3 3/8
12"
A2-5
IND12DM-A5
12.50
4.13
3.25
2.95
3.74
2.40
0.51
2.50
7/16-14 x 3 1/2
12"
A2-6
IND12DM-A6
12.50
5.25
4.19
2.95
3.74
2.40
0.60
2.50
1/2-13 x 3 1/2
12"
A2-8
IND12DM-A8
12.50
6.75
5.50
3.74
3.74
2.40
0.71
2.50
5/8-11 x 3 1/4
15"
A2-6
IND16DM-A6
15.75
5.25
4.19
3.74
4.13
2.85
0.60
3.00
1/2-13 x 4
15"
A2-8
IND16DM-A6
15.75
6.75
5.50
4.92
4.13
2.85
0.71
3.00
5/8-11 x 4
15"
A2-11 IND16DM-A11
15.75
9.25
7.75
6.30
4.13
2.85
0.79
3.00
3/4-10 x 4
20"
A2-8
IND20DM-A8
20.00
6.75
5.50
5.37
4.72
3.56
0.71
3.00
5/8-11 x 4 1/2
20"
A2-11 IND20DM-A11
20.00
9.25
7.75
6.30
4.72
3.56
0.79
3.00
3/4-10 x 4 1/2
25"
A2-11 IND25DM-A11
25.00
9.25
7.75
7.09
5.51
3.85
0.79
3.00
3/4-10 x 5 5/16
25"
A2-15 IND25DM-A15
25.00
13.00
11.25
9.50
5.51
3.85
0.83
3.00
7/8-9 x 5 5/16
Direct Mount Chucks
D1 4-Jaw Independent Chucks
• Cast iron body
• Medium duty
• Plain back chucks available
E
• 1 T-Wrench
• 2 hex keys
• T-slots provided in chucks 10" & up
F
G
7˚ 7’ 30”
A
H
B C D
TYPE D1
Dia.
Taper
Part #
A
B
C
D
E
F
G
H
Cam Stud Dia. (in.)
8"
D1-4
IND8DM-D4
8.00
3.25
2.50
2.21
2.95
1.83
0.52
1.75
5/8
8"
D1-5
IND8DM-D5
8.00
4.13
3.25
2.21
2.95
1.83
0.59
1.75
3/4
10"
D1-4
IND10DM-D4
10.00
3.25
2.50
2.21
3.35
2.38
0.52
2.13
5/8
10"
D1-5
IND10DM-D5
10.00
4.13
3.25
2.21
3.35
2.38
0.59
2.13
3/4
10"
D1-6
IND10DM-D6
10.00
5.25
4.19
2.95
3.35
2.38
0.63
2.13
7/8
12"
D1-6
IND12DM-D6
12.50
5.25
4.19
2.95
3.74
2.40
0.63
2.50
7/8
12"
D1-8
IND12DM-D8
12.50
6.75
5.50
3.74
3.74
2.40
0.71
2.50
1
15"
D1-6
IND16DM-D6
15.75
5.25
4.19
2.95
4.13
2.85
0.63
3.00
7/8
15"
D1-8
IND16DM-D8
15.75
6.75
5.50
4.92
4.13
2.85
0.71
3.00
1
15"
D1-11 IND16DM-D11
15.75
9.25
7.75
6.30
4.13
2.85
0.79
3.00
1 3/16
20"
D1-8
20.00
6.75
5.50
4.92
4.72
3.56
0.71
3.00
1
IND20DM-D8
20"
D1-11 IND20DM-D11
20.00
9.25
7.75
6.30
4.72
3.56
0.79
3.00
1 3/16
25"
D1-11 IND25DM-D11
25.00
9.25
7.75
7.09
5.51
3.85
0.79
3.00w
1 3/16
1-800-228-BUCK
23
POWER CHUCKS
• Grinding
Air Operated High Precision Power Chuck
Rotating Model SPAC
FEATURES AND BENEFITS:
• Highly flexible design solves gripping or turning issues in turn-key
applications
• Unique top tooling
• Compact and lightweight allowing for increased efficiency
• Can be applied for mass produced metal working machines as
ordinary attachments
• Most helpful for clamping non-standard and complicated parts for
finishing operation and fine finish cutting
• Standard clamping jaw stroke is 0.7 to 3.0 mm
• Also available in 2 or 4-Jaw models
• 1 μm repeatability
• 1 set of soft top jaws
• Wrench
Dimensions denoted in millimeters unless otherwise specified.
AIR CLAMPING ROTATING MODEL SPAC POWER CHUCK
Dia.
A
B
C
D
E
F
No. Jaws
Stroke Dia.
Max RPM
2"
64
53.7
50.00
3"
80
70.0
60.00
4"
100
88.9
5"
125
114.3
6"
150
135.8
8"
200
10"
250
Grip Force Per Jaw 6 Bars
20.6
9
42.40
3
2.0 mm
6000
60 kg/cm2
20.7
18
55.30
3
2.5 mm
5800
120 kg/cm2
82.55
20.7
18
55.45
3
2.5 mm
5000
210 kg/cm2
101.60
20.7
18
55.45
3
2.5 mm
4300
330 kg/cm2
125.00
20.7
18
55.45
3
2.5 mm
4000
350 kg/cm2
183.0
167.60
20.7
6
80.45
3
2.5 mm
3500
900 kg/cm2
233.7
215.80
20.7
6
80.45
3
2.5 mm
2500
900 kg/cm2
Other styles and special modifications available.
1-800-228-BUCK
25
Air Operated Power Chucks
Model TK 3-Jaw
OPTIONAL
ACCESSORY
Air Feed Tube
Also available in 2-Jaw.
26
Model
A
B
C
D
E
D1
d
(H7)
D2
TK-04
20.75
12.7
12.7
101.6
30
82.55
18
25.0
TK-06
39.75
12.7
12.7
152.4
40
124.97
26
34.5
TK-08
65.75
25.4
–
203.2
45
167.64
50
50.0
Model
H
h
W
TK-04
70.3
3.2
TK-06
70.3
3.2
TK-08
99.5
7.0
M1
M2
16
M5x0.8P(PCDø88.9)
M5x0.8P
22
M6x1P(PCDø135.89)
M5x0.8P
25
M10x1.5P(PCDø182.88)
M10x1.5P
Model
M3
T1
T2
TK-04
9-3.18
M5x0.8P(PCDø88.9)
–
TK-06
9-3.18
M6x1P(PCDø135.99)
M6x1P(PCDø110)
TK-08
6-6.36
M8x1.25P(PCDø182.88)
M8x1.25P(PCDø150)
Model
T3
R1
R2
R3
T.I.R.
Jaw T.I.R.
Jaw Stroke
Dia. (mm)
TK-04
–
30º
–
–
0.001
3
TK-06
M6x1P(PCDø135.99)
30º
30º
45º
0.001
3
TK-08
M8x1.25P(PCDø182.88)
30º
30º
30º
0.001
3
Model
Repeatability
Gripping Force
At Air Pressure 100 psi
(lb.)
Max. Speed
rpm (min1)
Weight
(lb.)
TK-04
0.001
683
4500
10
TK-06
0.001
1741
4500
22
TK-08
0.001
3196
4500
58
• Pre-machined tapped holes for fixing jigs, making
additional machining unnecessary
• Pre-machined lubrication path allows connection
to auto-lubrication unit
• Built-in cylinder allows more stable gripping
• Dowel pins built into master jaws allow for more
accurate and simplified remounting of soft jaws
• Good coaxiality and repeatability allows for 1µm
accuracy, which simplifies machining process
and increases efficiency
• One set of soft top jaws
• Wrench
Stationary Self Contained Closed Center
Model MO 3-Jaw Wedge Type Power Chuck
• Flange bottom allows chuck to be easily fixed on a
plate for quick changeovers
• Built-in cylinder allows for better stability and
takes up less space, which allows for higher
machining efficiency
• Chuck can be controlled by M-code for use in an
auto loading system
• Master jaws with 1.5 mm X 60° pitch enables hard
and soft jaw interchangeability with CNC lathe
chucks, allowing reduction in cost of spare jaws
• Dust-proof and water-resistant structure increases
chuck life and efficiency
Also available in 2-Jaw.
• One set of soft top jaws
• Wrench
MO 3-JAW WEDGE TYPE POWER CHUCK
Model
A
B
C
D
E
F
G
H
I
J
K
M0-04
155
115
–
15
77.5
103.5
26
49.5
14
10
23
M0-05
185
135
–
15
95
128
33
62
14
10
25
M0-06
224
169
25
16
118
158
40
73
20
12
31
M0-08
265
210
30
20
138
180
42
95
25
14
35
M0-10
315
254
52
23
150
196
46
110
30
16
40
M0-12
375
304
80
23
165
219
54
129
30
21
50
Model
L
M
N
O
P
Q
R
S
M0-04
13
9 (PCD 165)
PT1/8
M8x1.25P
–
–
64
47
M0-05
13
10 (PCD 135)
PT1/4
M8x1.25P
M8x1.25P
–
80
47
M0-06
18
11 (PCD 202)
PT1/4
M10x1.5P
M8x1.25P
–
80
47
M0-08
18
11 (PCD 243)
PT1/4
M10x1.5P
M10x1.5P
M10x1.5P
80
47
M0-10
18
13 (PCD 285)
PT1/4
M12x1.75P
M12x1.75P
M12x1.75P
80
47
M0-12
18
17 (PCD 340)
PT3/8
M16x2P
M12x1.75P
M12x1.75P
80
55
OPTIONAL
ACCESSORIES
Pneumatic
Manual switch
Model
Piston
Area (cm2)
Plunger
Stroke (mm)
Jaw Stroke
Dia. (mm)
Max.
Gripping
Force (lb.)
Max. Hydr.
Pressure
(psi)
Gripping Force
at Air Pressure
100 psi (lb.)
Gross Weight
(lb.)
Gripping
Range (mm)
M0-04
57
9
3.8
5291
213
2425
22
9-115
M0-05
74
10
5.4
7242
284
2866
25
12-135
M0-06
97
12
5.5
11111
284
4409
46
15-169
M0-08
156
16
7.4
17857
284
7275
81
20-210
M0-10
235
19
8.8
26918
284
10582
124
33-254
M0-12
292
23
10.6
31967
284
11243
154
40-304
1-800-228-BUCK
27
High Speed Thru-Hole Draw Tube Operated
• High-quality alloy steel body allows for high speeds
• Sharply increased dynamic gripping force greatly
improves work efficiency and safety
• Interchangeable top tooling with 1.5 mm x 60° jaw
serration pitch
• Compact and lightweight, allowing for increased efficiency
• Direct mounting to fit ASA B5.9 Type A spindle
• Improved lubrication system for high-accuracy and endurance
• Heat-treated alloy steel for high durability
• ASA B5.9 Type A spindle adapter
• Wrench
MODEL OPT 2-JAW WEDGE TYPE POWER CHUCK
Nose of
Spindle
Model
A
B
C
D
E
E1
F
4
OPT-204
–
110
59
85
–
–
–
OPT-205
A 2-4
135
60
110
63.51
20
–
OPT-206
A 2-5
169
81
140
82.56
15
–
OPT-208
A 2-6 (A 2-5)
210
91
170
106.98
17
23
G
H
H1
I1
J
K
–
70.6
–
–
26
M10x1.5P
96
82.6
PCD18
M8X1.25P
33
M10x1.5P
5
116
104.8
PCD145
M10x1.5P
45
M10x1.5P
5
150
133.4
PCD180
M10x1.5P
52
M12x1.75P
Model
L
M
Nmax
Nmin
Omax
Omin
Pmax
Pmin
Q
R
S
T
Umax
V
W
OPT-204
–
14
23.00
20.3
11.5
6.7
3.5
-6.5
23
10
17.5
2
M32x1.5P
12
24.0
OPT-205
15
14
26.20
23.5
19.0
6.0
1.0
-9.0
25
10
20.0
2
M40x1.5P
12
31.5
OPT-206
16
20
32.35
29.6
24.0
7.0
11.0
-1.0
31
12
19.0
2
M55x2P
20
37.0
OPT-208
18
25
39.10
35.4
30.0
10.0
14.5
-1.5
35
14
20.5
2
M60x2P
30
39.0
28
Model
X
Y
Thru-Hole Dia.
(mm)
Plunger
Stroke (mm)
Jaw Stroke
Dia. (mm)
Max
RPM
Max Pull
Force (lb.)
Max Hydr.
Pressure (psi)
Weight (lb.)
Grip Range (mm)
Min.
Max.
OPT-204
49.5
–
26
10
5.4
8000
2028
220
11
7
110
OPT-205
62.0
–
33
10
5.4
7000
2469
270
14
10
135
OPT-206
73.0
–
45
12
5.5
4500
3593
298
31
22
169
OPT-208
95.0
104.8
52
16
7.4
3600
5379
270
54
25
210
Note: Actuation Packages may be needed. Please contact our sales office for more information.
Model OPT 2-Jaw Wedge Type
Direct OEM Replacement
Model
Nose of
Spindle
A
B
C
D
E
E1
F
G
H
H1
I1
J
K
OPT-210
A 2-8 (A 2-6)
254
100
220
139.72
18
28
5
190
171.4
PCD225
M12x1.75P
75.0
M16x2P
OPT-212
A 2-8 (A 2-6)
304
110
220
139.72
18
–
6
190
171.4
PCD250
M12x1.75P
91.0
M16x2P
OPT-215
A 2-11 (A 2-8)
381
133
300
196.87
22
33
6
260
235.0
PCD324
M12x1.75P
117.5
M20x2.5P
Model
L
M
Nmax
Nmin
Omax
Omin
Pmax
Pmin
Q
R
S
T
Umax
V
W
OPT-210
19
30
51.50
47.1
34.0
12
8.5
-10.5
40
16
25.0
2
M85x2P
40
43
OPT-212
25
30
61.60
56.3
46.0
12
8.0
-15.0
50
21
28.0
2
M100x2P
50
51
OPT-215
28
43
82.30
77.0
46.0
13
7.0
-16.0
62
22
42.5
5
M130x2P
48
66
Model
X
Y
Thru-Hole Dia.
(mm)
Plunger
Stroke (mm)
Jaw Stroke
Dia. (mm)
Max
RPM
OPT-210
110
133.4
75.0
OPT-212
129
–
91.0
OPT-215
165
171.4
117.5
Max Pull
Force (lb.)
Max Hydr.
Pressure (psi)
19
8.8
3200
6966
284
84
28
254
23
10.6
2500
8994
284
134
35
304
23
10.6
1800
11904
270
246
63
381
Weight (lb.)
1-800-228-BUCK
Grip Range (mm)
Min.
Max.
29
• High-quality alloy steel body allows for higher speeds
• Sharply increased dynamic gripping force greatly improves
work efficiency and safety
• Interchangeable top tooling with 1.5 mm x 60° jaw serration pitch
• Compact and lightweight, allowing for improved efficiency
• Wrench
MODEL 0P 3-JAW WEDGE TYPE POWER CHUCK
B
C
D
E
E1
F
G
H
H1
I1
J
K
L
M
N
Max.
110 59
85
–
–
–
4
–
70.6
–
–
26
M10x1.5P
–
14
23.00 20.30
135 60 110 63.51
20
–
4
96
82.6
PCD118
M8x1.25P
33
M10x1.5P
15
14
26.20 23.50
169 81 140 82.56
15
–
5
116 104.8 PCD145
M10X1.5P
45
M10x1.5P
16
20
32.35 29.60
A 2-6 (A 2-5) 210 91 170 106.98 17
23
5
150 133.4 PCD180
M10X1.5P
52
M12x1.75P
18
25
39.10 35.40
Model
Nose of
Spindle
OP-204
–
OP-205
A 2-4
A 2-5
OP-206
OP-208
A
N
Min.
Model
O
Max.
O
Min.
P
Max.
P
Min.
Q
R
S
T
U
V
W
X
Y
Thru-Hole
Dia.
Plunger stroke
(mm)
OP-204
11.5
6.7
3.5
-6.5
23
10
17.5
2
M32x1.5P
12
24.0
49.5
–
26.0
10
OP-205
19.0
6.0
1.0
-9.0
25
10
20.0
2
M40x1.5P
12
31.5
62.0
–
33.0
10
OP-206
24.0
7.0
11.0
-1.0
31
12
19.0
2
M55x2P
20
37.0
73.0
–
45.0
12
OP-208
30.0
10.0
14.5
-1.5
35
14
20.5
2
M60x2P
30
39.0
95.0
104.8
52.0
16
Model
Jaw Stroke
Dia. (mm)
Max. Speed
(rpm)
Gross Weight
(lb.)
Max. Pull Force
(lb.)
Max. Gripping
Force (lb.)
Max. Hydr.
Pressure (psi)
Gripping Range (mm)
Min.
Max.
OP-204
5.4
8000
11
3148
6283
334
7
110
OP-205
5.4
7000
13
3814
7870
412
10
135
OP-206
5.5
6000
28
4718
12588
398
13
169
OP-208
7.4
5000
48
7408
18430
370
13
210
Note: Larger chuck sizes and thru-hole sizes available. Also available in 2-Jaw. Actuation Packages may be needed. Please contact our sales office for more information.
30
Model OP 3-Jaw Wedge Type Power Chuck
OP-204, 205
OP-206, 208, 210, 212, 215
OP-218
Nose of
Spindle
A
B
C
D
H1
I1
J
K
L
M
N
N
Max. Min.
190 171.4
PCD225
M12X1.75P
75.0
M16x2P
19
30
51.5 47.1
6
190 171.4
PCD250
M12X1.75P
91.0
M16x2P
25
30
61.6 56.3
33
6
260 235.0
PCD324
M12X1.75P
117.5
M20x2.5P
28
43
82.3 77.0
33
6
260 235.0
PCD230
M12X1.75P
120.0
M20x2.5P
28
43
83.8 78.5
E
E1
F
OP-210
A2-8 (A2-6) 254 100 220 139.72 18
28
5
OP-212
A2-8 (A2-6) 304 110 220 139.72 18
–
OP-215
A2-11 (A2-8) 381 133 300 196.87 22
OP-218
A2-11 (A2-8) 450 133 300 196.87 22
Model
G
H
Model
O
Max.
O
Min.
P
Max.
P
Min.
Q
R
S
T
U
V
W
X
Y
Thru-Hole
Dia.
Plunger stroke
(mm)
OP-210
34.0
12.0
8.5
-10.5
40
16
25.0
2
M85x2P
40
43
110
133.4
75.0
19
OP-212
46.0
12.0
8.0
-15.0
50
21
28.0
2
M100x2P
50
51
129
–
91.0
23
OP-215
46.0
13.0
7.0
-16.0
62
22
42.5
5
M130x2P
48
66
165
171.4
117.5
23
OP-218
78.0
18.0
7.0
-16.0
62
22
42.5
5
M130x2P
48
66
165
171.4
120.0
23
Model
Jaw Stroke
Dia. (mm)
Max. Speed
(rpm)
Gross Weight
(lb.)
Max. Pull Force
(lb.)
Max. Gripping
Force (lb.)
Max. Hydr.
Pressure (psi)
Gripping Range (mm)
Min.
Max.
OP-210
8.8
4200
74
9436
24273
384
30
254
OP-212
10.6
3300
122
12125
31702
384
35
304
OP-215
10.6
2500
235
15741
40234
348
35
381
OP-218
10.6
2000
250
15741
40234
348
40
450
1-800-228-BUCK
31
Model OPF 4-Jaw Wedge Type Power Chuck – Direct OEM Replacement
• Sharply increased dynamic gripping force greatly improves work
efficiency and safety
• Wrench
MODEL 4-JAW WEDGE TYPE POWER CHUCK
Model
Nose of Spindle
A
B
C
D
E
E1
F
G
H
H1
I1
J
K
OPF-206
A 2-5
169
81
140
82.56
15
–
5
116
104.8
PCD145
M10x1.5P
45.0
M10x1.5P
OPF-208
A 2-6 (A2-5)
210
91
170
106.98
17
23
5
150
133.4
PCD180
M10x1.5P
52.0
M12x1.75P
OPF-210
A 2-8 (A2-6)
254
100
220
139.72
18
28
5
190
171.4
PCD225
M12x1.75P
75.0
M16x2P
OPF-212
A 2-8 (A2-6)
304
110
220
139.72
18
-
6
190
171.4
PCD250
M12x1.75P
91.0
M16x2P
OPF-215
A 2-11 (A2-8)
381
133
300
196.87
22
33
6
260
235.0
PCD324
M12x1.75P
117.5
M20x2.5P
Model
L
M
N
Max.
N
Min.
O
Max.
O
Min.
P
Max.
P
Min.
Q
R
S
T
U
V
W
X
Y
OPF-206
16
20
32.35
29.6
24.0
7.0
11.0
-1.0
31
12
19.0
2
M55x2.0P
20
37.0
73.0
–
OPF-208
18
25
39.10
35.4
30.0
10.0
14.5
-1.5
35
14
20.5
2
M60x2.0P
30
39.0
95.0
104.8
OPF-210
19
30
51.50
47.1
34.0
12.0
8.5
-10.5
40
16
25.0
2
M85X2P
40
43.0
110.0
133.4
OPF-212
25
30
61.60
56.3
46.0
12.0
8.0
-15.0
50
21
28.0
2
M100X2P
50
51.0
129.0
-
OPF-215
28
43
82.30
77.0
46.0
13.0
7.0
-16.0
62
22
42.5
5
M130X2P
48
66.0
165.0
171.4
32
Model
Thru-Hole
Dia. (mm)
Plunger stroke Jaw Stroke
(mm)
Dia. (mm)
Max. Speed
(rpm)
Gross
Weight (lb.)
Max. Pull
Force (lb.)
OPF-206
45.0
12
OPF-208
52.0
16
OPF-210
75.0
OPF-212
OPF-215
Max. Gripping
Max. Hydr.
Force (lb.)
Pressure (psi)
Gripping Range (mm)
Min.
Max.
5.5
4500
31
3593
9215
298
22
169
7.4
3600
54
5379
13249
270
25
210
19
8.8
3200
84
6966
17747
284
28
254
91.0
23
10.6
2500
134
8994
22928
284
25
304
117.5
23
10.6
1800
246
11904
29982
270
63
381
High Speed Closed Center Power Chuck
Model CLT 2-Jaw Wedge Type – Direct OEM Replacement
• Wrench
MODEL CLTK 2-JAW WEDGE TYPE POWER CHUCK
Model
Nose of
Spindle
A
B
C
D
E
E1
F
G
H
J
K
L
M
CLT-06
A 2-5
165
74
140
82.56
15
–
5
116
104.8
21
M10x1.5P
14
20
CLT-08
A 2-6 (A 2-5)
210
85
170
106.38
17
23
5
150
133.4
25
M12x1.75P
18
25
CLT-10
A 2-8 (A 2-6)
254
89
220
139.72
18
28
5
190
171.4
34
M16x2P
25
30
CLT-12
A 2-8
304
106
220
139.72
18
–
6
190
171.4
34
M16x2P
25
30
Model
Nmax
Nmin
Omax
Omin
Pmax
Pmin
Q
R
S
T
CLT-06
37.8
33.25
18.0
7.5
CLT-08
46.3
41.90
22.5
9.0
CLT-10
51.4
47.00
37.5
CLT-12
60.7
55.45
47.0
U
V
W
X
Y
101.5
81.5
31
12
36
127.0
106.0
35
14
36
4
M16X2P
34
39
73
–
5
M20X2.5P
38
42
95
–
10.5
158.0
133.0
40
16
11.0
163.0
133.0
50
18
36
5
M20X2.5P
45
46
110
104.8
36
5
M20X2.5P
50
54
130
133.4
Max Grip
Force (lb.)
Grip Range (mm)
Max Hydr.
Weight (lb.)
Min.
Max.
Pressure (psi)
Model
Plunger Stroke
(mm)
Jaw Stroke
Dia. (mm)
Max RPM
Max Pull
Force (lb.)
CLT-06
20
8.5
5000
2689
7627
270
25
9
165
CLT-08
21
8.8
4000
3593
11001
227
47
12
210
CLT-10
25
8.8
3500
4254
15741
270
72
15
254
CLT-12
30
10.5
3000
6062
22707
263
126
20
304
1-800-228-BUCK
33
High Speed Closed Center Power Chuck
Features and Benefits:
• Wrench
MODEL CL 3-JAW WEDGE TYPE POWER CHUCK
Model
Nose of
Spindle
A
B
C
D
E
E1
F
G
H
J
K
L
M
Nmax
Nmin
CL-05
A 2-4
135
55
80
63.51
–
–
7
–
100.0
–
M8x1.5P
14
14
30.4
27.20
CL-06
A 2-5
165
74
140
82.56
15
–
5
116
104.8
21
M10x1.5P
14
20
37.8
33.25
CL-08
A 2-6 (A 2-5)
210
85
170
106.38
17
23
5
150
133.4
25
M12x1.75P
18
25
46.3
41.90
CL-10
A 2-8 (A 2-6)
254
89
220
139.72
18
28
5
190
171.4
34
M16x2P
25
30
51.4
47.00
Model
Omax
Omin
Pmax
Pmin
Q
R
S
T
U
V
W
X
Y
CL-05
17.00
7.00
9.0
-6.0
25
10
35
2
M12x1.75P
28
31
62
–
CL-06
18.00
7.50
101.5
81.5
31
12
36
4
M16x2P
34
39
73
–
CL-08
22.50
9.00
127.0
106.0
35
14
36
5
M20x2.5P
38
42
95
–
CL-10
37.50
10.50
158.0
133.0
40
16
36
5
M20x2.5P
45
46
110
104.8
Plunger Stroke
(mm)
Jaw Stroke Dia.
(mm)
Max RPM
Max Pull
Force (lb.)
Max Grip
Force (lb.)
Max Hydr.
Pressure (psi)
Weight (lb.)
CL-05
15
6.4
5500
1764
5401
312
13
8
135
CL-06
20
8.5
5000
3813
11464
384
25
18
165
CL-08
21
8.8
4600
5379
16402
355
48
12
210
CL-10
25
8.8
4000
6283
23831
412
74
16
254
Note: Larger sizes available. Actuation Packages may be needed. Please contact our sales office for more information.
34
Grip Range (mm)
Min.
Max.
Model
Model CL 3-Jaw Wedge Type
Model
Nose of
Spindle
A
B
C
D
E
E1
F
G
H
J
K
L
M
Nmax
Nmin
CL-12
A 2-8
304
106
220
139.72
18
–
6
190
171.4
34
M16x2P
25
30
60.7
55.45
CL-15
A 2-11
381
114
300
196.87
22
–
6
260
235.0
–
M20x2.5P
32
43
77.5
69.50
CL-18
A 2-11
450
114
300
196.87
22
–
6
260
235.0
–
M20x2.5P
32
43
108.0
100.00
Model
Omax
Omin
Pmax
Pmin
Q
R
S
T
U
V
W
X
Y
CL-12
47.00
11.00
163.0
133.0
50
18.0
36
5
M20x2.5P
50
54
130
133.4
CL-15
50.25
23.25
104.0
69.0
62
25.5
55
2
M30x3.5P
60
63
165
–
CL-18
49.50
25.50
92.0
57.0
62
25.5
55
2
M30x3.5P
60
63
165
–
Grip Range (mm)
Min.
Max.
Max Pull
Force (lb.)
Max. Grip
Force (lb.)
Max Hydr.
Pressure (psi)
Weight (lb.)
3200
8994
34171
412
129
18
304
2800
18210
55754
462
222
68
381
2500
18210
55754
462
250
85
450
Model
Plunger Stroke
(mm)
Jaw Stroke Dia.
(mm)
Max RPM
CL-12
30
10.5
CL-15
35
16.0
CL-18
25
16.0
1-800-228-BUCK
35
The Original Buck Power Chuck – Stationary Hydraulic/Pneumatic
• Stationary hydraulic/pneumatic built-in cylinder uses less
space, while increasing stability and machining efficiency
• Ideal for CNC machining centers as well as standard mills
and grinders
• Designed with a sealed face to help protect internal
parts from abrasion for a longer service life in the most
demanding applications
• Guaranteed repeatability of .001” TIR or better on
duplicate part production
• Wear plates under master jaws are easily shimmed or
replaced to restore original accuracy
NOTES:
• Featured with American Square Serrated Master Jaws
(other jaw styles available)
• Available with or without a Thru Hole; available in 2-Jaw,
3-Jaw or 2/3-Jaw styles
• Also available in a lightweight aluminum body
• Parts available for previous models – contact our sales
office for more information
• Made in USA
STATIONARY HYDRAULIC/PNEUMATIC 3-JAW POWER CHUCK
36
Model
A
B
C
D
E
F
G
H
Jaw Travel
Max Drawbar
Pull (lb.)
Max Line
Pressure (psi)
A5606
6.50
2.00
1.00
0.25
2.88
0.41
5.19
0.16
0.25
2800
166
A5608
8.25
2.00
1.50
0.22
3.72
0.34
5.78
0.16
0.25
5000
170
A5610
10.00
2.00
2.00
0.31
4.50
0.53
6.37
0.31
0.25
9000
195
A5612
12.00
2.00
2.00
0.31
5.38
0.53
6.25
0.19
0.25
10500
160
A5615
15.00
2.00
3.18
0.31
6.75
0.66
8.06
0.38
0.25
15000
160
A5618
18.00
2.00
3.18
0.31
8.00
0.66
8.06
0.38
0.25
15000
105
A5624
24.00
2.00
3.75
0.50
9.38
0.78
9.50
0.31
0.25
15000
50
The Original Buck Power Chuck – Hydraulic Sliding Jaw
• Ajust-Tru® Precision! Dead-zero precision mounting feature for “near-zero” runout
• Wide keyway to increase bearing surfaces, lessen wear and increase stability
• Hardened and ground steel wear surfaces increase service life
• Guaranteed repeatability of .001” TIR or better on duplicate part production
• Wear plates under master jaws are easily shimmed or replaced to restore
original accuracy
• Hardened replaceable wedge bushings available for factory or field
replacement; simple grinding restores wedge to original fit
• 4-to-1 mechanical advantage in all chuck sizes
L
K
N
J
NOTES:
• Featured with tongue & groove master jaws
Other jaw styles available
• Available with or without a Thru Hole
• Available in 2-Jaw, 3-Jaw or 2/3-Jaw styles
• Also available in lightweight aluminum body
• Parts available for previous models – please
contact our sales office for more information
• Ajust-Tru® power chuck mounting plate required
• Made in USA
O
M
D
A
C
B
E
H
F
G
SUPER LIFE 3-JAW MODEL POWER CHUCK
Model
A
B
C
D
E
F
G
H
J
K
L
M (max) M (min)
N
O
A4006
6.50
4.78
1.00
0.63
2.06
0.47
3.25
5/8"-18
0.50
0.16
7/16"-14
2.44
A4008
8.25
6.16
1.50
0.66
2.63
0.53
3.86
5/8"-18
0.50
0.16
1/2"-13
3.06
2.19
0.13
1.50
2.75
0.13
1.75
A4010
10.00
7.91
2.00
0.88
3.38
0.69
4.47
1"-14
0.75
0.19
5/8"-11
3.81
A4012
12.00
7.91
2.00
0.88
3.38
0.69
4.47
1"-14
0.75
0.19
5/8"-11
4.50
3.44
0.13
2.13
4.13
0.13
2.50
A4015
15.00
11.78
3.19
0.94
4.63
0.78
5.16
1"-14
0.75
0.28
3/4"-10
5.63
5.25
0.13
3.00
A4018
18.00
11.78
3.19
0.94
4.63
0.78
5.16
1"-14
0.75
0.28
A4021
21.00
16.03
3.75
1.19
6.50
0.94
6.50
1"-14
0.75
0.31
3/4"-10
5.63
5.25
0.13
3.00
3/4"-10
7.13
6.63
0.13
3.00
A4024
24.00
16.03
3.75
1.19
6.50
0.94
6.50
1"-14
0.75
0.31
3/4"-10
7.13
6.63
0.13
3.00
SUPER LIFE 3-JAW MODEL POWER CHUCK
Model
Jaw Travel
Max Drawbar Force (lb.)
Max RPM
Wedge Travel (in.)
Total Compensation
Weight (lb.)
A4006
0.25
1900
2000
1.00
0.13
26
A4008
0.31
3300
1800
1.25
0.13
55
A4010
0.38
6000
1600
1.50
0.25
92
A4012
0.38
7000
1400
1.50
0.25
133
A4015
0.38
10000
1200
1.50
0.25
218
A4018
0.38
10000
1000
1.50
0.25
331
A4021
0.50
10000
900
2.00
0.25
570
A4024
0.50
10000
800
2.00
0.25
748
1-800-228-BUCK
37
The Original Buck Power Chuck – 2/3-Jaw Combination
• Ajust-Tru® Precision! Dead-zero precision mounting features for “near-zero” runout
• Holds both round and square parts for greater flexibility and less machine down time
• Extended master jaws bear against front plate to virtually eliminate “bell mouthing”
• Wide keyways to increase bearing surfaces, lessen wear and increase stability
• Extremely rugged and precise – designed for easy maintenance
• Hardened and ground steel wear surfaces increase service life
• Guaranteed repeatability of .001” TIR or better on duplicate part production
• Wear plates under master jaws are easily shimmed or replaced to restore original accuracy
• Hardened replaceable wedge bushings available for factory or field replacement; simple
grinding restores wedge to original fit
• 4 to 1 mechanical advantage
L
K
N
J
NOTES:
• Featured with tongue and groove master jaws;
other styles available
• Available with or without a Thru Hole
• 2-Jaw, 3-Jaw or 2/3-Jaw styles available
• Parts available for previous models; contact our
sales office for more information
• Also available in lightweight aluminum body
• Ajust-Tru® power chuck mounting plate required
• Made in USA
O
M
D
A
C
B
E
H
F
G
SUPER LIFE 2/3-JAW COMBINATION POWER CHUCK
Model
A
B
C
D
E
F
G
H
J
K
L
M (max)
M (min)
N
O
A4610
10
7.91
2.00
0.88
3.38
0.69
4.47
1"-14
0.75
0.19
5/8"-11
3.81
3.44
0.13
2.13
A4612
12
7.91
2.00
0.88
3.38
0.69
4.47
1"-14
0.75
0.19
5/8"-11
4.50
4.13
0.13
2.50
A4615
15
11.78
3.19
0.94
4.63
0.78
5.16
1"-14
0.75
0.28
3/4"-10
5.63
5.25
0.13
3.00
A4618
18
11.78
3.19
0.94
4.63
0.78
5.16
1"-14
0.75
0.28
3/4"-10
5.63
5.25
0.13
3.00
A4621
21
16.03
3.75
1.19
6.50
0.94
6.50
1"-14
0.75
0.31
3/4"-10
7.13
6.63
0.13
3.00
A4624
24
16.03
3.75
1.19
6.50
0.94
6.50
1"-14
0.75
0.31
3/4"-10
7.13
6.63
0.13
3.00
SUPER LIFE 2/3-JAW COMBINATION POWER CHUCK
38
Model
Jaw Travel
Max Drawbar
Force (kg)
Wedge Travel
Max RPM
Weight (lb.)
A4610
0.38
9000
1.5
2600
92
A4612
0.38
10500
1.5
2200
133
A4615
0.38
15000
1.5
1500
218
A4618
0.38
15000
1.5
1200
331
A4621
0.50
15000
2.0
1000
570
A4624
0.50
15000
2.0
900
748
Note: Actuation Packages may be
needed. Please contact our sales
office for more information.
Buck Pull-Back Power Chuck
• Ajust-Tru® Precision! Dead-zero precision mounting features for “near-zero” runout
• 100% more gripping power than conventional chucks
• Perfect match for single or multiple spindle machines making heavy cuts on precision work
• Angular jaws on wider keyway plus heavy-duty wedge offer strength and rigidity for
maximizing gripping power from beginning to end of jaw travel
• Provides positive end location of parts by holding work solidly against work stops
G
P
O
Q
N
NOTES:
• Available also in 2-Jaw
• Parts available for previous models;
contact our sales office for more info
• Ajust-Tru® power chuck mounting
plate required
• Made in USA
M
B
S Max.
H
J
C
K
A
E
L
F
D
3-JAW PULL-BACK POWER CHUCK
Part #
Chuck
Size
A
B
C
D
E
F
3706
6
6.50
4.78
0.75
0.63
2.06
0.469
K
L
M
N
O
P
MIN
P
MAX
3.06 .625"-18 1.25
2.25
1.13
1.50
0.50
0.31
0.31
0.16
G
H
J
3708
8
8.25
6.16
0.88
0.66
2.63
0.530
3.75 .625"-18 1.75
2.53
1.28
1.75
0.50
–
0.31
0.16
3710
10
10.00
7.91
0.88
0.88
2.63
0.530
4.72
1"-14
2.66
3.69
1.69
2.13
0.75
–
0.34
0.16
3712
12
12.00
7.91
0.88
0.88
3.38
0.660
5.13
1"-14
2.66
3.69
1.69
2.50
0.75
–
0.38
0.19
3715
15
15.00 11.78
1.25
0.94
4.63
0.780
5.50
1"-14
2.25
3.19
1.69
3.00
0.75
–
0.58
0.38
3718
18
18.00 11.78
1.25
0.94
4.63
0.780
6.00
1"-14
1.50
2.69
1.69
3.00
0.75
–
0.58
0.31
3721
21
21.00 16.03
2.00
1.19
6.50
0.940
7.94
1"-14
1.75
4.00
2.28
3.00
0.75
–
0.58
0.31
3724
24
24.00 16.03
2.00
1.19
6.50
0.940
7.94
1"-14
1.75
4.00
2.28
3.00
0.75
–
0.58
0.31
3-JAW PULL-BACK POWER CHUCK
Part #
Q
R
S MAX
Jaw Travel
(in.)
Wedge Travel
(in.)
Max. Drawbar
Force (kg)
Max. RPM
Weight (lb.)
3706
.437"-14
1
2.44
0.25
1.13
6000
3000
26
3708
.750"-16
1
3.06
0.28
1.28
10000
2500
55
3710
.875"-14
1
3.81
0.38
1.69
15000
2000
92
3712
.875"-14
1
4.50
0.38
1.69
18000
1700
133
3715
1"-14
1
5.63
0.38
1.69
25000
1400
218
3718
1"-14
2
5.63
0.38
1.69
25000
1100
331
3721
1"-14
2
7.13
0.50
2.28
25000
1080
570
3724
1"-14
3
7.13
0.50
2.28
25000
900
748
1-800-228-BUCK
Note: Actuation Packages may be
needed. Please contact our sales
office for more information.
39
Buck Forkardt Quick Change Chucks
POWER CHUCKS TYPE FNC
Technical Features:
• Optimum production efficiencies due to minimal jaw changeover times
• Highest gripping forces and extreme accuracy
• High-grade, specially heat-treated chuck body – one-piece, high strength
and highly rigid construction – slim design with weight-reducing cutouts
• Mounting flanges for short taper mounting are available
• FNC chucks may be equipped with standard jaws (hard or soft), claw jaws
or special jaws
Advantages at a Glance:
• Reduction of jaw changeover time to a few seconds
• Well proven F jaw system can also be used on FNC chucks, so many
existing jaw sets can continue to be used
• Mounting accessories to suit any machine spindle
• Closely maintained concentricity and repetitive accuracy, and long
service life
• Extremely high gripping forces due to patented heavy-duty, trapezoidal
wedge hook actuation
MANUAL CHUCKS TYPE F+
Technical Features:
• Hardened chuck body for maximum precision and service life
• Internal parts of the most suitable steels for maximum gripping force
• Large thru-hole for barwork
• Proven F jaw system has been incorporated unchanged
• Jaw designs for a wide range of applications
• Quick jaw changing within seconds
• Highest repetition precision when reusing the jaws
• Unproblematical use of existing jaw sets
• Maximum working speeds due to low jaw weight
• Single jaw protection for sale operation
• Can be used on all types of lathes
Advantages at a Glance:
• Backlash-free mechanism for maximum accuracy
• Maximum loadability and wear resistance
• Quick jaw change within seconds
• Suitable for use on all types of lathes
• Long service life (5-year warranty)
Contact our sales office for technical specifications.
40
Available with base jaws, one-piece stepped hard jaws, special soft top jaws, hard top jaws, soft monoblock jaws and special jaws.
TORK-LOK
• Finish turning
• Grinding
Tork-Lok Arbors and Collets
TORK-LOK ARBORS AND COLLETS
The Tork-Lok arbor design answers the need for a completely versatile workholding
device. Precision ground flats on collets and arbors improve long-term accuracy and
torque transmission. Standardization of components permits interchangeability and
combination possibilities. Locates straight or tapered holes on true center.
Safety Stops
Contraction
Expansion
Precision Mated
Flats on Collet
Installation and Operating Instructions
Safety Stops
The expansion safety stop is fixed in all styles and requires no adjustment. The
contraction or loading position safety stop is adjusted to suit the part being chucked.
Precision Mated Flats on Both
Expander and Arbor Body
Preload
All collets are manufactured to include a preload. Collets should not be adjusted below
the range minimum for that collet. Preloads are .008 average on sizes from .500-.874
and .015 from .875-4.467.
Chip Clearance
Special Work Stop Consideration:
Combination Work Stop and Retaining Sleeve: Restricor Type Work Stops are necessary
for parts whose gripping length is shorter than the collet. Since the Tork-Lok collet
expands at both ends, a retaining sleeve is needed to prevent the free end of the collet
from over expanding; a Restrictor Expander is used to reduce the expansion safety stop,
preventing collet breakage (in case arbor is operated without a part in position).
Notes:
• All Tork-Lok arbor applications require a part stop
• If Restrictor Type Stop is used, a special Restricor Expander is required
• Contact us at 1-800-228-BUCK for more information
Machine ID of
sleeve to high
limit of part
+.02 - +.004
DRAWBAR MODEL
DRAWBAR MODEL
Note: Max. Drawbar pull
stamped here
Dirt Seal
Forward
Expander
Drawbar
Connector
Expansion
Stop
Drawbar should be in forward or push position. Adjust forward
expander with Allen wrench until part is a slip fit on the collet. Collet
flats both ends must mate.
Collet Changing
Drawbar should be in forward positions. Using Allen wrench, remove
forward expander. Collet and rubber sleeve can then be removed. Wash
parts in clean solvent. Lightly grease expander flats in contact. Install
forward expander. Adjust according to instructions outlined above.
AIR-OPERATED MODEL
Contraction Stop
Air pressure on the cylinder should be at 70 psi. Adjust forward
expander with Allen wrench until part is slip fit on the collet. Collet
flats on both ends must mate.
AIR-OPERATED MODEL
Expansion Stop
Forward
Expander
Dirt Seal
Contraction Stop
42
Collet Changing
With air pressure at 70 psi, follow instructions listed in Drawbar
Model.
To Interchange Assemblies
Apply 70 psi, remove mounting screws, turn arbor assembly
counterclockwise until drawbar disengages from piston assembly.
To mount assembly, apply 70 psi. Be sure threads on drawbar are
clean and oiled. Turn arbor assembly clockwise until face contacts
cylinder. Back off to align tapped holes in cylinder. Insert screws and
adjust according to instructions outlined above.
Arbor Applications
TYPICAL APPLICATIONS FOR ARBORS
PISTON
BALL JOINT
COMPRESSION PLATE
DIFF. CARRIER
GEAR BLANK
FRONT BRAKE DRUM
Special arbor combinations are
available upon request. Please contact
us at 1-800-228-BUCK for details.
TRACK ROTOR
PUMP HOUSING
1-800-228-BUCK
43
Tork-Lok Drawbar Models
Long Series Arbors
FEATURES AND BENEFITS
• Answers your need for versatility
• Precision-ground flats improve accuracy
• Standardization permits interchangeability
• Locates straight or tapered holes on true center
• Requires a part stop
SHIPS COMPLETE WITH
• Flange body
• Connector
• Expander
• Collet sold separately; see pages 46 & 47
LONG SERIES
Part #
AC 2110
AC 2210
AC 2310
AC 2410
AC 2510
AC 2610
AC 2710
AC 2810
AC 2910
44
Range
.500-.655
10 Collets
.593-.780
12 Collets
.718-.999
18 Collets
.875-1.249
12 Collets
1.125-1.624
16 Collets
1.468-2.092
20 Collets
1.937-2.843
29 Collets
2.563-3.593
33 Collets
3.312-4.467
37 Collets
A
B
C
D
E
2.49 0.88 0.39 0.66 0.50
2.69 1.06 0.41 0.66 0.50
2.96 1.25 0.49 0.66 0.50
3.58 1.44 0.56 0.90 0.56
3.89 1.62 0.69 0.90 0.56
4.14 1.81 0.82 0.72 0.68
4.46 2.00 1.00 0.66 0.68
4.83 2.25 1.12 0.66 0.68
4.97 2.50 1.11 0.56 0.68
F
0.4702
0.4692
0.5796
0.5786
0.7046
0.7036
0.8452
0.8442
1.0796
1.0786
1.4077
1.4067
1.8452
1.8442
2.4390
2.4385
3.1885
3.1880
G
1.25
1.25
1.25
1.75
1.75
2.50
2.50
3.00
3.62
H
3.3755
3.3750
3.3755
3.3750
3.3755
3.3750
4.1255
4.1250
4.1255
4.1250
4.8755
4.8750
4.8755
4.8750
5.5005
5.5000
5.5005
5.5000
J-J1
0.750
0.562
0.750
0.562
0.750
0.562
1.220
0.750
1.220
0.750
1.590
0.968
1.590
0.968
1.590
0.968
1.590
0.068
K
3/8 – 24
3/8 – 24
3/8 – 24
1/2 – 20
1/2 – 20
3/4 – 16
3/4 – 16
3/4 – 16
3/4 – 16
L
For (4) 3/8 S.H.S
on 2.50 B.C.
For (4) 3/8 S.H.S
on 2.50 B.C.
For (4) 3/8 S.H.S
on 2.50 B.C.
For (4) 1/2 S.H.S
on 3.12 B.C.
For (4) 1/2 S.H.S
on 3.12 B.C.
For (4) 1/2 S.H.S
on 3.75 B.C.
For (4) 1/2 S.H.S
on 3.75 B.C.
For (4) 1/2 S.H.S
on 4.50 B.C.
For (4) 1/2 S.H.S
on 4.50 B.C.
M
For (4) 5/16 – 24
on 2.375 B.C.
For (4) 3/8 – 24
on 2.875 B.C.
For (4) 3/8 – 24
on 3.625 B.C.
Tork-Lok Drawbar Models
Short Series Arbors
FEATURES AND BENEFITS
• Answers your need for versatility
• Precision-ground flats improve accuracy
• Standardization permits interchangeability
• Locates straight or tapered holes on true center
• Requires a part stop
SHIPS COMPLETE WITH
• Flange body
• Connector
• Expander
• Collet sold separately; see pages 48 & 49
SHORT SERIES
Part #
AC 8100
AC 8200
AC 8300
AC 8400
AC 8500
AC 8600
AC 8700
Range
.500-.655
15 Collets
.593-.787
20 Collets
.718-1.000
28 Collets
.875-1.299
20 Collets
1.125-1.624
24 Collets
1.468-2.104
30 Collets
1.937-2.821
42 Collets
A
B
C
D
E
1.81
0.590 0.42 0.25 0.50
1.97
0.720 0.45 0.25 0.50
2.15
0.840 0.51 0.25 0.50
2.35
0.940 0.59 0.18 0.56
2.59
1.125 0.65 0.18 0.56
2.93
1.220 0.83 0.12 0.68
2.98
1.310 0.79 0.12 0.68
F
0.4702
0.4692
0.5796
0.5786
0.7046
0.7036
0.8452
0.8442
1.0796
1.0786
1.4077
1.4067
1.8452
1.8442
G
0.88
1.00
1.12
1.38
1.56
1.88
2.38
H
3.3755
3.3750
3.3755
3.3750
3.3755
3.3750
4.1255
4.1250
4.1255
4.1250
4.8755
4.8750
4.8755
4.8750
J-J1
0.781
0.562
0.781
0.562
0.781
0.562
1.250
0.750
1.250
0.750
1.625
0.968
1.625
0.968
K
3/8 – 24
3/8 – 24
3/8 – 24
1/2 – 20
1/2 – 20
3/4 – 16
3/4 – 16
1-800-228-BUCK
L
M
For (4) 3/8 S.H.S
on 2.50 B.C.
For (4) 3/8 S.H.S For (4) 5/16 – 24
on 2.375 B.C.
on 2.50 B.C.
For (4) 3/8 S.H.S
on 2.50 B.C.
For (4) 1/2 S.H.S
on 3.12 B.C. For (4) 3/8 – 24
For (4) 1/2 S.H.S on 2.875 B.C.
on 3.12 B.C.
For (4) 1/2 S.H.S
on 3.75 B.C. For (4) 3/8 – 24
For (4) 1/2 S.H.S on 3.625 B.C.
on 3.75 B.C.
45
Tork-Lok Long Series Collets
• Precision ground flats
• Collets interchangeable on all arbors within specified range
• Accuracy of arbor not affected by indexing of collet shaft
• High-grade steels, precisely heat treated
• Also available sealed – contact our sales office for more
information
• Works with drawbar models on page 44
Bold indicates oversize collets
Measurements in inches.
FOR USE ON: AC 1100, 2110, 4110, 5110
LENGTH: 0.88 in.
COLLET #
AC 101
AC 102
AC 103
AC 104
AC 105
AC 106
AC 107
AC 108
AC 109
AC 110
RANGE
.500-.515
.516-.530
.531-.546
.547-.561
.562-.577
.578-.592
.593-.608
.609-.623
.624-.639
.640-.655
FOR USE ON: AC 1200, 2210, 4210, 5210
LENGTH: 1.06 in.
COLLET #
RANGE
AC 201
AC 202
AC 203
AC 204
AC 205
AC 206
AC 207
AC 208
AC 209
AC 210
AC 211
AC 212
.593-.608 .609-.624 .625-.639 .640-.655 .656-.670 .671-.686 .687-.702 .703-.717 .718-.733 .734-.749 .750-.764 .765-.780
FOR USE ON: AC 1300, 2310, 4310, 5310
LENGTH: 1.25 in.
COLLET #
AC 301
AC 302
AC 303
AC 304
AC 305
AC 306
AC 307
AC 308
AC 309
RANGE
.718-.733
.734-.749
.750-.764
.765-.78.
.781-.796
.797-.812
.813-.827
.828-.843
.844-.858
COLLET #
AC 310
AC 311
AC 312
AC 313
AC 314
AC 315
AC 316
AC 317
AC 318
RANGE
.859-.874
.875-.890
.891-.905
.906-.921
.922-.936
.937-.952
.953-.967
.968-.983
.984-.999
FOR USE ON: AC 1400, 2410, 4410, 5410
LENGTH: 1.44 in.
COLLET #
AC 401
AC 402
AC 403
RANGE
.875-.905
.906-.936
.937-.967
AC 404
AC 405
AC 406
AC 407
AC 408
AC 409
AC 410
AC 411
FOR USE ON: AC 1500, 2510, 4510, 5510
LENGTH: 1.62 in.
COLLET #
AC 501
AC 502
AC 503
AC 504
AC 505
AC 506
AC 507
AC 508
RANGE
1.125-1.155
1.156-1.186
1.187-1.217
1.218-1.249
1.250-1.280
1.281-1.311
1.312-1.342
1.343-1.374
COLLET #
AC 509
AC 510
AC 511
AC 512
AC 513
AC 514
AC 515
AC 516
RANGE
1.375-1.405
1.406-1.436
1.437-1.467
1.468-1.499
1.50-1.530
1.531-1.561
1.562-1.592
1.593-1.624
46
AC 412
.968-.999 1.000-1.030 1.031-1.061 1.062-1.092 1.093-1.124 1.125-1.155 1.156-1.186 1.187-1.217 1.218-1.249
Tork-Lok Long Series Collets
Bold indicates oversize collets.
FOR USE ON: AC 1600, 2610, 4610, 5610
LENGTH: 1.82 in.
COLLET #
RANGE
COLLET #
RANGE
AC 601
AC 602
AC 603
AC 604
AC 605
AC 606
AC 607
AC 608
AC 609
AC 610
1.468-1.499 1.500-1.530 1.531-1.561 1.562-1.592 1.593-1.624 1.625-1.655 1.656-1.686 1.687-1.717 1.718-1.749
AC 611
AC 612
AC 613
AC 614
AC 615
AC 616
AC 617
AC 618
1.750-1.780
AC 619
AC 620
1.781-1.811 1.812-1.842 1.843-1.874 1.875-1.905 1.906-1.937 1.937-1.967 1968.-1.999 2.000-2.030 2.031-2.061
2.062-2.092
FOR USE ON: AC 1700, 2710, 4710, 5710
LENGTH: 2.00 in.
COLLET #
RANGE
COLLET #
RANGE
COLLET #
RANGE
AC 701
AC 702
AC 703
AC 704
AC 705
AC 706
AC 707
AC 708
AC 709
AC 710
1.937-1.967 1.968-1.999 2.000-2.030 2.031-2.061 2.062-2.092 2.093-2.124 2.125-2.155 2.156-2.186 2.187-2.217 2.218-2.249
AC 711
AC 712
AC 713
AC 714
AC 715
AC 716
AC 717
AC 718
AC 719
AC 720
2.250-2.280 2.281-2.311 2.312-2.342 2.343-2.374 2.375-2.405 2.406-2.436 2.437-2.467 2.468-2.499 2.500-2.530 2.531-2.562
AC 721
AC 722
AC 723
AC 724
AC 725
AC 726
AC 727
AC 728
AC 729
2.563-2.593 2.594-2.624 2.625-2.655 2.656-2.686 2.687-2.718 2.719-2.749 2.750-2.780 2.781-2.811 2.812-2.843
FOR USE ON: AC 1800, 2810, 4810
LENGTH: 2.25 in.
COLLET #
RANGE
COLLET #
RANGE
COLLET #
RANGE
AC 801
AC 802
AC 803
AC 804
AC 805
AC 806
AC 807
AC 808
AC 809
AC 810
AC 811
2.562-2.593 2.594-2.624 2.625-2.655 2.656-2.686 2.687-2.718 2.719-2.749 2.750-2.780 2.781-2.811 2.812-2.843 2.844-2.874 2.875-2.905
AC 812
AC 813
AC 814
AC 815
AC 816
AC 817
AC 818
AC 819
AC 820
AC 821
AC 822
2.906-2.936 2.937-2.968 2.969-2.999 3.000-3.030 3.031-3.061 3.062-3.093 3.094-3.124 3.125-3.155 3.156-3.186 3.187-3.218 3.219-3.249
AC 823
AC 824
AC 825
AC 826
AC 827
AC 828
AC 829
AC 830
AC 831
AC 832
AC 833
3.250-3.280 3.281-3.311 3.312-3.343 3.344-3.374 3.375-3.405 3.406-3.436 3.437-3.468 3.469-3.499 3.500-3.530 3.531-3.561 3.562-3.593
FOR USE ON: AC 1900, 2910, 4910
LENGTH: 2.50 in.
COLLET #
AC 901
AC 902
AC 903
AC 904
AC 905
AC 906
AC 907
AC 908
AC 909
AC 910
AC 911
AC 912
AC 913
RANGE 3.312-3.343 3.344-3.374 3.375-3.405 3.406-3.436 3.437-3.468 3.469-3.499 3.500-3.530 3.531-3.561 3.562-3.593 3.594-3.624 3.625-3.655 3.656-3.686 3.687-3.718
COLLET #
AC 914
AC 915
AC 916
AC 917
AC 918
AC 919
AC 920
AC 921
AC 922
AC 923
AC 924
AC 925
AC 926
RANGE 3.719-3.749 3.750-3.780 3.781-3.811 3.812-3.843 3.844-3.874 3.875-3.905 3.906-3.936 3.937-3.968 3.969-3.999 4.000-4.030 4.031-4.061 4.062-4.093 4.094-4.124
COLLET #
AC 927
AC 928
AC 929
AC 930
AC 931
AC 932
AC 933
AC 934
AC 935
AC 936
AC 937
RANGE 4.125-4.155 4.156-4.186 4.187-4.217 4.218-4.249 4.250-4.280 4.281-4.311 4.312-4.342 4.343-4.374 4.375-4.405 4.406-4.36 4.437-4.467
1-800-228-BUCK
47
Tork-Lok Short Series Collets
• Precision ground flats
• Collets interchangeable on all arbors within specified range
• Accuracy of arbor not affected by indexing of collet shaft
• High-grade steels, precisely heat treated
• Also available sealed – contact our sales office for more
information
• Works with drawbar models on page 46
Bold indicates oversize collets
FOR USE ON: AC 7100A, 8100, 10110, 12100
LENGTH: .59 in.
COLLET #
AC 7101
AC 7102
AC 7103
AC 7104
AC 7105
AC 7106
AC 7107
AC 7108
RANGE
.500-.510
.511-.520
.521-.531
.532-.541
.542-.552
.553-.562
.563-.572
.573-.582
COLLET #
AC 7109
AC 7110
AC 7111
AC 7112
AC 7113
AC 7114
AC 7115
RANGE
.583-.592
.593-.603
.604-.613
.614-.624
.625-.634
.635-.645
.646-.655
FOR USE ON: AC 7200A, 8200, 10210, 12200
LENGTH: .72 in.
COLLET #
AC 7201
AC 7202
AC 7203
AC 7204
AC 7205
AC 7206
AC 7207
AC 7208
AC 7209
AC 7210
RANGE
.593-.603
.604-.613
.614-.624
.625-.634
.635-.645
.646-.655
.656-.666
.667-.676
.677-.687
.688-.697
COLLET #
AC 7211
AC 7212
AC 7213
AC 7214
AC 7215
AC 7216
AC 7217
AC 7218
AC 7219
AC 7220
RANGE
.698-.707
.708-.717
.718-.727
.728-.737
.738-.747
.748-.757
.758-.767
.768-.777
.778-.787
.788-.797
FOR USE ON: AC 7300A, 8300, 10310, 12300
LENGTH: .84 in.
48
COLLET #
AC 7301
AC 7302
AC 7303
AC 7304
AC 7305
AC 7306
AC 7307
AC 7308
AC 7309
AC 7310
RANGE
.718-.727
.728-.737
.738-.747
.748-.757
.758-.767
.768-.777
.778-.787
.788-.797
.798-.807
.808-.817
COLLET #
AC 7311
AC 7312
AC 7313
AC 7314
AC 7315
AC 7316
AC 7317
AC 7318
AC 7319
AC 7320
RANGE
.818-.827
.828-.837
.838-.847
.848-.8576
.857-.866
.867-.874
.875-.884
.885-.895
.896-.905
.906-.916
COLLET #
AC 7321
AC 7322
AC 7323
AC 7324
AC 7325
AC 7326
AC 7327
AC 7328
RANGE
.917-.926
.927-.937
.938-.947
.948-.958
.959-.978
.969-.979
.980-.989
.990-1.000
Oversize collets AC 7110-7115, AC 7213-7220 and AC 7317-7328 should be used only in light turning or grinding operations.
Tork-Lok Short Series Collets
Bold indicates oversize collets.
FOR USE ON: AC 7400A, 8400, 10410, 12400
LENGTH: .94 in.
COLLET #
AC 7401
AC 7402
AC 7403
AC 7404
AC 7405
AC 7406
RANGE
.875-.895
.896-.916
.917-.937
.938-.958
.959-.979
.980-1.000
AC 7413
AC 7414
AC 7415
AC 7416
COLLET #
AC 7411
AC 7412
RANGE
1.085-1.104
1.05-1.124
AC 7407
AC 7408
AC 7409
AC 7410
1.001-1.021 1.022-1.024 1.043-1.063 1.064-1.084
AC 7417
AC 7418
AC 7419
AC 7420
1.125-1.146 1.147-1.168 1.169-1.190 1.191-1.212 1.213-1.234 1.235-1.256 1.257-1.278 1.279-1.299
FOR USE ON: AC 7500A, 8500, 10510, 12500
LENGTH: 1.22 in.
COLLET #
AC 7501
AC 7502
AC 7503
AC 7504
AC 7505
AC 7506
AC 7507
AC 7508
AC 7509
RANGE
1.125-1.146
1.147-1.168
1.169-1.190
1.191-1.212
1.213-1.234
1.235-1.256
1.257-1.278
1.279-1.299
1.300-1.320
COLLET #
AC 7510
AC 7511
AC 7512
AC 7513
AC 7514
AC 7515
AC 7516
AC 7517
AC 7518
RANGE
1.321-1.341
1.342-1.362
1.363-1.383
1.384-1.404
1.405-1.425
1.426-1.446
1.447-1.467
1.468-1.489
1.490-1.511
COLLET #
AC 7519
AC 7520
AC 7521
AC 7522
AC 7523
AC 7524
RANGE
1.512-1.533
1.534-1.555
1.556-1.577
1.578-1.599
1.600-1.621
1.622-1.642
FOR USE ON: AC 7600A, 8600, 10610, 12600
LENGTH: 1.22 in.
COLLET #
RANGE
COLLET #
RANGE
COLLET #
RANGE
AC 7601
AC 7602
AC 7603
AC 7604
AC 7605
AC 7606
AC 7607
AC 7608
AC 7609
AC 7610
1.468-1.489 1.490-1.511 1.512-1.533 1.534-1.555 1.556-1.577 1.578-1.599 1.600-1.621 1.622-1.642 1.643-1.663 1.664-1.684
AC 7611
AC 7612
AC 7613
AC 7614
AC 7615
AC 7616
AC 7617
AC 7618
AC 7619
AC 7620
1.685-1.705 1.706-1.726 1.727-1.747 1.748-1.768 1.769-1.789 1.790-1.810 1.811-1.831 1.832-1.852 1.853-1.873 1.874-1.894
AC 7621
AC 7622
AC 7623
AC 7624
AC 7625
AC 7626
AC 7627
AC 7628
1.895-1.915 1.916-1.936 1.967-1.957 1.958-1.978 1.979-1.999 2.000-2.020 2.021-2.041 2.042-2.062
AC 7629
AC 7630
2.063-2.08
2.084-2.104
FOR USE ON: AC 7700A, 8700, 10710, 12700
LENGTH: 1.31 in.
COLLET #
RANGE
COLLET #
RANGE
COLLET #
RANGE
COLLET #
RANGE
AC 7701
AC 7702
AC 7703
AC 7704
AC 7705
AC 7706
AC 7707
AC 7708
AC 7709
AC 7710
AC 7711
1.937-1.957 1.958-1.978 1.979-1.999 2.000-2.020 2.021-2.041 2.042-2.062 2.063-2.083 2.084-2.104 2.105-2.125 2.126-2.146 2.147-2.167
AC 7712
AC 7713
AC 7714
AC 7715
AC 7716
AC 7717
AC 7718
AC 7719
AC 7720
AC 7721
AC 7722
2.168-2.188 2.189-2.209 2.210-2.230 2.231-2.251 2.252-2.272 2.273-2.293 2.294-2.314 2.315-2.335 2.336-2.356 2.357-2.377 2.378-2.398
AC 7723
AC 7724
AC 7725
AC 7726
AC 7727
AC 7728
AC 7729
AC 7730
AC 7731
AC 7732
AC 7733
2.399-2.419 2.420-2.440 2.441-2.461 2.462-2.481 2.482-2.501 2.502-2.521 2.522-2.541 2.542-2.561 2.562-2.583 2.584-2.604 2.605-2.625
AC 7734
AC 7735
AC 7736
AC 7737
AC 7738
AC 7739
AC 7740
AC 7741
AC 7742
2.626-2.646 2.647-2.667 2.668-2.689 2.690-2.711 2.712-2.733 2.734-2.755 2.756-2.777 2.778-2.799 2.800-2.821
1-800-228-BUCK
49
Tork-Lok Replacement Components
Sold in Kits
EXPANDER
REPLACEMENT COMPONENTS
Flange Shaft #
Assembly #
Replacement #
(sold separately)
AC 2110
AC 2110K
AC 159
AC 2210
AC 2210K
AC 259
AC 2310
AC 2310K
AC 359
AC 2410
AC 2410K
AC 459
AC 2510
AC 2510K
AC 559
AC 2610
AC 2610K
AC 659
CONNECTOR
RETAINING RING
LOCK PIN
FLANGE SHAFT
(sold separately)
DIRT SEAL
AC 2710
AC 2710K
AC 759
AC 2810
AC 2810K
AC 859
AC 2910
AC 2910K
AC 959
AC 8100
AC 8100K
AC 8152
AC 8200
AC 8200K
AC 8252
AC 8300
AC 8300K
AC 8352
AC 8400
AC 8400K
AC 8452
AC 8500
AC 8500K
AC 8552
AC 8600
AC 8600K
AC 8652
AC 8700
AC 8700K
AC 8752
Air-Operated Models
AIR OPERATED MODELS
Cylinder Assembly #
A
B
C
Connector Part #
For Use With
AC-3007
8.18
2.91
6.885
6.875
AC-135
AC 2110, 2210, 2310, 8100, 8300
AC-136
AC 2410, 2510, 8400, 8500
AC-137
2110, 2210, 2310, 8100, 8200, 8300
AC-3010
11.18
3.03
9.885
9.875
AC-138
2410, 2510, 8400, 8500
AC-139
2610, 2710, 8600, 8700
AC-138
2410, 2510, 8400, 8500
AC-139
2610, 2710, 2810, 2910, 8600, 8700
AC-3013
50
14.18
3.09
12.885
12.875
Manual Tork-Lok Fixtures
Assembly #
AC 6100
AC 6400
AC 6600
BASE ASSEMBLY
A
B
3.75
6.38
4.50
6.88
5.25
7.75
"C" Connector
AC 172 A
Assembly #
AC 12100
SHORT SERIES
O.H.
Arbor Assembly
3.62
AC 8100
AC 172 A
AC 12200
TORK-LOK FIXTURE
The Tork-Lok Fixture is a powerful locking mechanism
for use with Tork-Lok Arbors. It features low initial cost
and little maintenance for milling and drilling operations.
Assembly #
AC 5110
O.H.
4.30
AC 5210
4.50
LONG SERIES
Arbor Assembly
AC 2110
AC 2210
3.78
C
0.56
0.56
0.56
"D" Connector
AC 12272
AC 8200
AC 12272
AC 5310
4.77
AC 2310
AC 174 A
AC 12300
3.96
AC 8300
AC 12372
AC 5410
5.39
AC 2410
AC 472 A
AC 12400
4.16
AC 8400
AC 12472
AC 5510
5.70
AC 2510
AC 473 A
AC 12500
4.4
AC 8500
AC 12572
AC 5610
5.95
AC 2610
AC 672 A
AC 12600
4.74
AC 8600
AC 12672
AC 5710
6.27
AC 2710
AC 672 A
AC 12700
4.79
AC 8700
AC 12672
For Fixture Use
Installation and Operating Instructions
Expander
Arbor
Assembly
Locked Position
Unlocked Position
Unlocked Position
OPERATING INSTRUCTIONS
1. Mount fixture on machine.
2. Adjust expander with Allen wrench so that
part is a slip fit on collet. Be sure collet and
arbor flats mate on both ends.
3. To clamp part, move handle clockwise.
4. To release part, move handle
counterclockwise.
ORDERING INSTRUCTIONS
A complete fixture is ready to mount on your
machine. When ordering additional arbor
assemblies for fixture use, indicate connector
also. When ordering base assemblies, indicate
connector(s) desired.
Drawbar
Connector
Base
Assembly
Fixture to Arbor
Connector
TO CHANGE ARBOR ASSEMBLIES
ADAPTATION OF DRAWBAR MODELS
From one size range to another (see chart above
for arbor assembly and connector):
1. Remove cap screws and turn arbor assembly
off the base clockwise.
2. CAUTION Handle must be in unlocked position.
3. Turn replacement arbor assembly
counterclockwise into base until snug.
Continue movement until holes line up.
Replace cap screws.
Expander
1. Procure proper fixture base and connectors to
accommodate drawbar model you have
(see chart above).
2. Remove drawbar connector (A) by backing
out expander (B) with Allen wrench until
connector is free. Remove retaining ring.
3. Insert fixture connector (C or D) by turning in
expander (B) until flats mate and are firm on
both ends. No retainer ring is necessary.
4. CAUTION Handle must be in unlocked
position.
5. Turn assembly counterclockwise into base
assembly until snug. Continue movement
until holes line up. Replace cap screws.
1-800-228-BUCK
51
ALSO AVAILABLE FROM BUCK
Logansport® Self Centering Power Chucks
352, 452, 430, 440, 330 and 340 series
2-Jaw, 3-Jaw or 2/3-Jaw available – The Logansport® lever design offers a
high degree of mechanical advantage which, in turn, allows for the use of smaller
diameter rotating cylinders. Quality materials are used throughout and all center
parts are protected by pressure lubrication. Logansport chucks have long enjoyed a
well-deserved reputation for durability and uninterrupted service. Available in 6” to
24” – other sizes upon request.
Logansport® 3-Jaw Compensating Power Chucks
362, 364 & 370 Series
One Piece Body – The design simplicity of Logansport® chucks insures lasting
accuracy and efficiency. They are one-piece body, cored for light weight and radially
reinforced for extra rigidity. Compensating power chucks are used for turning parts
between centers. Available in 6” to 24” – other sizes upon request.
BUCK Extra Heavy Duty Oil Country Chucks
Scroll or Independent – Available in 25” to 80” sizes – solid or American standard
tongue & groove jaws. 3-Jaw scroll or 4-Jaw independent. Steel or cast iron bodies.
Master jaw and hardened reversible top jaw styling. Internal and external chucking
operations. Competitively priced. Direct mount conversion plates available. Adapters to
fit most common spindle types available – contact our sales office for more information.
2155 Traversefield Dr.
Traverse City, MI 49686
Tel: 800-228-BUCK
Fax: 231-995-8362
www.buckchuckusa.com
[email protected]
Buck Chuck Company is your workholding solution.
If there is something you need that is not featured here, please contact us. We may be able to help.
BC 2011 V. 1

P R O D U C T C A T A L O G

Transcription

Similar documents

P R O D U C T C A T A L O G

The Buck Chuck Catalog!

touchdex - SMW AUTOBLOK Ibérica

K-Series 型錄_C