Prosthetics Section

Transcription

Prosthetics Section

PROSTHETICS
579
PROSTHETICS
Postoperative Management
Distal Pads and Gel Cups............................581
Post-Op Socks............................................. 582
Protective Sockets...................................... 583
Postoperative Components....................... 585
Upper Extremity Prosthetics
Upper Extremity Liners.............................. 586
Arm Sleeves................................................ 586
Cable Components..................................... 587
Harnesses.....................................................591
Elbow Devices..............................................592
Disconnect Wrists........................................593
Flexion Wrists..............................................595
Friction Wrists.............................................595
Economy Wrists...........................................596
Hooks...........................................................597
Hook Accessories.........................................599
Hands.......................................................... 600
Lower Extremity Prosthetics
Hip Systems..................................................601
Hip Components.........................................602
Microprocessor Knees................................ 604
Polycentric Knees....................................... 605
Knee Disarticulation...................................607
4-Bar Knees.................................................607
Hydraulic Knees.......................................... 609
Pneumatic Knees......................................... 611
Safety Knees................................................ 612
Single Axis Knees........................................ 613
Exoskeletal Durathane Setups...................615
Hydraulic Knee Control Units.....................615
Gait Analysis
Galileo..........................................................616
Compas™.....................................................616
Endoskeletal Components
Sockets......................................................... 617
Socket Blocks............................................... 617
Attachment Plates......................................618
4-Hole Pyramid Adapters...........................623
4-Hole Pyramid Adapters with Hole.........626
4-Hole Pyramid Receiver Adapters............631
Threaded 4-Hole Bases and Inserts...........633
Cup Connectors...........................................637
4-Ear Lamination Adapters........................637
3-Prong Lamination Adapters...................641
4-Prong Lamination Adapters.................. 645
Double End Adapters................................ 646
Slide and Alignment Components............ 649
Adjustable Height Adapters......................655
The Largest Independent O&P Distributor
Tube Clamp Adapters.................................655
Tube Adapters.............................................659
Tube Assemblies and Pylons......................661
Shock Pylons................................................663
Aluminum Tube...........................................663
Carbon Tube............................................... 664
AK Modular Component Sets....................665
BK Modular Component Sets.................... 666
Ankles..........................................................667
Foot Adapters............................................. 668
Foot Bolts.....................................................672
Blocks...........................................................673
Prosthetic Finishing
AK Foam Covers..........................................674
BK Foam Covers...........................................676
Cosmetic Covers and Skins.........................679
Prosthetic Feet
Centri.......................................................... 683
Custom Carbon Composite Creations...... 687
Hosmer........................................................ 687
Kingsley Manufacturing............................ 688
Nabtesco-Proteor-USA............................... 689
Trulife.......................................................... 690
WillowWood...............................................702
Accessory Feet.............................................708
Lower Extremity Suspension
Suspension Belts..........................................709
Straps...........................................................712
Suspension Sleeves......................................714
Liners............................................................725
Gel Sheaths..................................................736
Distal Cushions and Volume
Management...........................................737
Valves...........................................................739
Locking Devices...........................................746
Proximal Suspension Systems.....................762
Removable Medial Brim.............................763
3-S.................................................................764
Knitted Goods
Stump Shrinkers..........................................765
Sheaths.........................................................772
Filler, Spacer and Fitting Socks...................775
Prosthetic Foot Socks..................................777
Prosthetic Socks...........................................778
Syme’s and Partial Foot Socks....................797
Hip Disarticulation Socks........................... 798
Prosthetic Sock Accessories........................799
Cosmetic Stockings.....................................799
580
PROSTHETICS
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
PROSTHETICS
581
DISTAL PADS and GEL CUPS
a.
Distal End Pad
Polyurethane filter foam. Sold each.
Diameter
3”
4”
5”
6”
Item No. ð DEP-300 DEP-400DEP-500 DEP-600
b.
Distal End Pad
A functional distal pad that ensures total contact between stump and socket. Made of non-toxic
urethane foam. Sold each.
Diameter
2.75”
3.25”
4”
4.5”
Item No. ð TC-2500 TC-2501TC-2502 TC-2503
c.
Distal End Pad™
Ideal for providing extra protection from shock and abrasion at the distal end. Provides protection to changing residual limb volume and mass. Tapered design may be trimmed to fit. 3.5mm at thickest point. 4” (10cm)
diameter. Sold each. From Silipos.
Item No. ð
12005-SI
d.
Pressure Relief Pad Set
Sold set.
PROSTHETICS
Side
Left
Right
Item No. ð
C3MW3869LC3MW3869R
e.
Felt Pressure Relief Pad Set
Sold set. From Knit-RIte.
Item No. ð
3M2RSPST
582
P r os t h e t ics
POST-OP SOCKS
a.
Unsterilized Post-Op Sock
For immediate postoperative prosthetic fittings. 3 ply weight. 97% Acrylic, 3% Lycra®. Fleeced inside. Modified box toe. Pre-rolled for application. 18” length. Packed in individual polyethylene bags. 4 per box. From
Knit-RIte.
Top x Toe
5” x 3.5”
5” x 4”
6” x 5”
8” x 6”
9” x 7”
Length
14”
18”
18”
18”
18”
Item No. ð 1PL3BS141PL3BS181PL305181PL32618 1PL33718
b.
Pre-Sterilized Post-Op Sock
For immediate postoperative prosthetic fittings. 3 ply weight. 97% Acrylic, 3% Lycra®. Fleeced inside. Modified
box toe. Pre-rolled for application. 18” length. Packed in individual Tyvek/mylar pouches in shrink wrapped
box. 4 per box. From Knit-RIte.
Sterilization cycle is validated per current GMP standards to meet FDA requirement using ANSI/AAMI/ISO
11135 to comply with this requirement.
Top x Toe
4” x 5”
Item No. ð 1PL3S418
6” x 5”
8” x 6”
9” x 7”
1PL3S5181PL3S618 1PL3S718
c.
Symes Post-Op Sock
For immediate postoperative use. Seamless 3 ply acrylic/Lycra ®. Non-sterile. Sold each. From Knit-Rite.
Length
Top Width
Ankle Width
Ball
Item No.ò
24” (60cm)
7.5” (19cm)
4.5” (11cm)
5” (12.5cm)
1SL3E124
PROSTHETICS
d.
Chopart Post-Op Sock
For immediate postoperative use. Seamless 3 ply acrylic/Lycra®. Non-sterile. Sold each. From Knit-RIte.
Length
Top Width
Ankle Width
Ball
Item No.ò
24” (60cm)
7” (18cm)
4” (10cm)
6” (15cm)
1CL3E124
PROSTHETICS
583
PROTECTIVE SOCKETS
e.
PAL-Guard™
Prefabricated, protective postoperative limb guard which allows for wound inspection and cleaning. Lightweight, durable copolymer shell adds protection. Coolfoam™ liner is removable for laundering. Lateral uprights
help to align the limb and prevent knee flexion contracture. Prevents edema and helps to shape the residual
limb to prepare for prosthetic fitting. Waistbelt and suspension strap included. Sold each. From Orthomerica.
Size
Small
Inside Shell
Circumf
Diameter
4”
PAL-Guard
Item No. Replacement
Strap Set
Replacement
Liner Set
13”
8401
8401.018401.02
Medium
5”
16”
8402
8402.018402.02
Large
6”
19”
8403
8403.018403.02
f.
Flo-Tech® SOFTIE
The Softie™ (transtibial) and Softie-TF™ (transfemoral) sockets are soft, non-constricting (when protocol is
followed), and easy to remove at any time to address wound concerns. It will protect the incision area from
micro tears which occur as the patient repositions him/herself in bed. The Softie™ is available in left or right.
The Softie-TF™ is universal. Sold each.
Description
Left
Right
Universal
Transtibial
Transtibial
Transfemoral
Item No. ð
SOFTIE-TTLSOFTIE-TTR SOFTIE-TF
g.
Flo-Tech-Tor™ — Transfemoral
The Flo-Tech-Tor™ is used as a protective socket and for early supervised weight bearing prosthetic management of transfemoral amputations when used in conjunction with the UFOS™. Sold each.
Size
Small
Medium
Large
X-Large
Ischial Circumference
16”-22’
19”-25”
22”-28”
26”-32”
Distal Circumference
13”-17”
16”-20”
19”-23”
24”-28”
Left
TFFTLS TFFTLMTFFTLL TFFTLXL
Right
TFFTRS TFFTRMTFFTRL TFFTRXL
PROSTHETICS
h.
UFOS™ — Transfemoral
The UFOS for transfemoral amputations is an external frame outer socket used to attach the pylon and foot
system. Fork strap provides auxiliary suspension. Copoly construction for strength and durability. Four-bolt
Grace plate accepts components. The UFOS-TF is sized to match the Flo-Tech-Tor-TF™. This system allows your
patient to wear the Flo-Tech-Tor™ alone when the pylon and foot are not needed. Sold each.
Size
Small
Medium
Large
Ischial Circumference
16”-22’
19”-25”
22”-28”
X-Large
26”-32”
13”-17”
16”-20”
19”-23”
24”-28”
Left
TFUFLXS
TFUFLS TFUFLM TFUFLLTFUFLXL
Right
TFUFRXS
TFUFRS TFUFRM TFUFRLTFUFRXL
584
P r os t h e t ics
PROTECTIVE SOCKETS — Continued
a.
Flo-Tech-Tor™ — Transtibial
The Flo-Tech-Tor™ is used as a protective socket and for early supervised weight bearing prosthetic management of transtibial amputations. 7” or 9” length. Sold each.
Size
X-Small
Small
Medium
Large
X-Large
MPT Circ
14”-15”
15”-16”
16”-17”
17”-18”
18”-19”
XX-Large XXX-Large
19”-20”
21”-22”
Distal Circ
13”-14”
14”-15”
15”-16”
16”-17”
17”-18”
18”-19”
20”-21”
7” Left
TTFT7LXS
TTFT7LS
TTFT7LM
TTFT7LL
TTFT7LXL TTFT7LXXLTTFT7LXXXL
7” Right
TTFT7RXS
TTFT7RS
TTFT7RM
TTFT7RL
TTFT7RXL TTFT7RXXLTTFT7RXXXL
9” Left
TTFT9LXS
TTFT9LS
TTFT9LM
TTFT9LL
TTFT9LXL TTFT9LXXLTTFT9LXXXL
9” Right
TTFT9RXS
TTFT9RS
TTFT9RM
TTFT9RL
TTFT9RXL TTFT9RXXLTTFT9RXXXL
b.
UFOS™ — Transtibial
The UFOS for transtibial amputations is an external frame outer socket used to attach the pylon and foot
system. Fork strap provides auxiliary suspension. Copoly construction for strength and durability. Four-bolt
Grace plate accepts components. The UFOS 7 is sized to match the Flo-Tech-Tor™. This system allows your
patient to wear the Flo-Tech-Tor™ alone when the pylon and foot are not needed. 7” or 9” length. Sold each.
Size
X-Small
Small
Medium
Large
X-Large
XX-Large XXX-Large
MPT Circ
14”-15”
15”-16”
16”-17”
17”-18”
18”-19”
19”-20”
21”-22”
Distal Circ
13”-14”
14”-15”
15”-16”
16”-17”
17”-18”
18”-19”
20”-21”
7” Left
TTUF7LXS
TTUF7LS
TTUF7LM
TTUF7LL
TTUF7LXL TTUF7LXXLTTUF7LXXXL
7” Right
TTUF7RXS
TTUF7RS
TTUF7RM
TTUF7RL
TTUF7RXL TTUF7RXXLTTUF7RXXXL
9” Left
TTUF9LXS
TTUF9LS
TTUF9LM
TTUF9LL
TTUF9LXL TTUF9LXXLTTUF9LXXXL
9” Right
TTUF9RXS
TTUF9RS
TTUF9RM
TTUF9RL
TTUF9RXL TTUF9RXXLTTUF9RXXXL
PROSTHETICS
PROSTHETICS
585
POSTOPERATIVE COMPONENTS
c.
Adjustable BK Pylon
For use with postoperative management. Rated to 220 lb (100kg). Product weight 708g. Includes side straps
(1400011000). Sold each. From Trulife.
Item No. ð
DISCON
DISCONReplacement Strap Set (4)
2240800000 Upper Quick Disconnect Plate
d.
The Coupler Post-Op Kit
The Coupler™ Post-Op model consists of the basic Coupler™ Plate plus contoured stainless steel attachment
uprights. The uprights are held in place using perpendicular grooves and screws. Sold each. From Becker
Orthopedic.
Item No. ð
P403010
P403010-STRAPStrap for The Coupler
e.
Silesian Belt
Double thick 2” (5cm) cotton webbing and 3/4” (2cm) heavy Dacron® front attachment strap. Sold each.
From Trulife.
Waist Size
Item No.ò
22” (56cm)
209L02-200-0927
24” (61cm)
209L02-400-0927
28” (71cm)
209L02-800-0927
30” (76cm)
209L03-000-0927
32” (81cm)
209L03-200-0927
PROSTHETICS
26” (66cm)
209L02-600-0927
586
Upper Extremity Prosthetics
P r os t h e t ics
UPPER EXTREMITY LINERS
a.
Alpha® Upper Extremity Liner
The Alpha Upper Extremity Liner surrounds the residual limb in a layer of skin-friendly, mineral-oil-based gel
that contains Vitamin E. Made from thermoplastic elastomer (not silicone or urethane), the gel gently adheres
to the skin to protect against abrasion and breakdown. The Alpha gel is covered in a layer of durable fabric
that extends the life of the liner and allows it to easily slide into a socket.
In order to provide maximum comfort and excellent socket fit, the Alpha Upper Extremity Liner is available
in 3 mm gel thickness as well as three sizes to adapt to the amputee’s limb circumference. The unique ovalshaped umbrella allows for a more comfortable fitting liner on upper extremity patients. Like the lower
extremity liners, the Alpha Upper Extremity Liner is heat moldable, allowing prosthetists to easily tailor
the liner’s fit within their facilities. Uniform style. Available in Original or Spirit fabric. Buff color. Sold each.
From WillowWood.
Size
Small
Medium
Medium Plus
Original Fabric
AUL-5133-EAUL-5130-E AUL-5134-E
Spirit Fabric
AUL-5433-EAUL-5430-E AUL-5434-E
ARM SLEEVES
b.
Arm Gel Suspension Sleeve
Works with Myo-Electric and cosmetic prostheses. 8-3/4” (22cm) length. 8-13” (20-30cm) circumference. Sold
each. From Silipos.
Item No. ð
13005
PROSTHETICS
c.
ComforGel™ Liner
Special gel is enclosed between two layers of cotton stretch fabric. Nylon reinforced distal end. Additional
gel at distal end. Fits adult arm or pediatric leg. 2-1/4” flat width. 10” maximum circumference. For Distal
End Hole, add 3 to end of Item No. Sold each. From Comfort Products.
3 Ply
Length Gel
Item No.ò
12”
9”
CGELYA
12”
12”
CGELYAFD
14”
9”
CGELYA14
14”
12”
CGELYA14/12
14”
14”
CGELYA14FD
5 Ply
Length Gel
Item No.ò
12”
9”
CGELGA
12”
12”
CGELGAFD
14”
9”
CGELGA14
14”
12”
CGELGA14/12
14”
14”
CGELGA14FD
PROSTHETICS
Upper Extremity
587
CABLE COMPONENTS
f.
Cable, Swaged Rolls
Stainless steel. Available in small, standard, heavy-duty and nylon coated in 25’ or 100’ roll. From Hosmer.
Model No.
C-101
C-101-100
Type
Small
Small
C-101P
C-100
Nylon Coated Standard
C-100-100
C-100HD C-100HD-100
Standard Heavy-Duty Heavy-Duty
Diameter 3/64”3/64”3/64”1/16” 1/16”3/32”3/32”
(.119cm)(.119cm)(.119cm)(.159cm)(.159cm)(.238cm)(.238cm)
Roll Length25’100’25’ 25’100’25’100’
Item No. ð
50321568585032250318568565031956857
g.
Cable Housing
25’ package (two 12.5’ lengths). From Hosmer.
Description
Item No.ò
Model CH-100, F its Small (C-101) and Standard (C-100) Cable
50455
Model CH-100HD, Fits Heavy-Duty (C-100HD) Cable
50456
h.
Cable Housing Liner
Teflon liner for Heavy-Duty Cable Housing (CH-100HD) and Cables of 1/16” (.159cm) diameter. 25’ roll. From
Hosmer.
Item No. ð
50482
Cable Housing Cover
25 foot roll. From Hosmer.
Description
Item No.ò
Model CHC-100, Standard
50457
Model CHC-100HD, Heavy-Duty
50458
PROSTHETICS
i.
j.
Plastic Cable Retainer
Sold each.
Size
1/8” (.318cm)
3/16” (.476cm)
1/4” (.635cm)
Item No. ð544825448354484
588
Upper Extremity
PROSTHETICS
CABLE COMPONENTS — Continued
a.
Cable Swaging Tool
Two of same size dies required. From Hosmer.
Item No. ð
50520
50524
Replacement Die, 3/64”
50523 Replacement Die, 1/16”
50522 Replacement Die, 3/32”
b.
Triple Swivel
9/32” (.71cm) diameter ball for hooks. Includes grommet (50448). Sold each. From Hosmer.
Description
Item No.ò
Model C-701, For 3/64” (.117cm) Cable
50352
Model C-701A, For 1/16” (.158cm) Cable
50348
Model C-701HD, For 3/32” (.238cm) Cable
50353
50448
C-759, Replacement Rubber Grommet
c.
Ball Terminal, 3/16”
3/16” (.48cm) diameter ball. Sold each. From Hosmer.
Description
Item No.ò
50355
50354
Model C-703HD, For 3/32” (.238cm) Cable*
50356
PROSTHETICS
d.
Ball Terminal, 9/32”
9/32” (.71cm) diameter ball. Sold each. From Hosmer.
Description
Item No.ò
50358
50357
e.
Ball Receiver
Sold each. From Hosmer.
Description
Item No.ò
Model C-713, 3/16” (.476cm) for 1/16” (.158cm) Cable
50411
Model C-713A, 3/16” (.476cm) for 3/64” (.117cm) Cable
50419
Model C-713HD, 3/16” (.476cm) for 3/32” (.238cm) Cable
50415
Model C-714, 9/32” (.714cm) for 1/16” (.158cm) Cable
50422
Model C-713L, 3/16” (.476cm) for 1/16” (.158cm) Cable with Sliding Cover
57072
PROSTHETICS
f.
Upper Extremity
589
Retainer Base Plate
Model C-708. Includes rubber disc. Sold each. From Hosmer.
Item No. ð
50359
50360
C-708A, Replacement Rubber Disc
g.
Cable Retainer
Description
Item No.ò
Model C-709, for Standard CH-100HD Housing, Aluminum
50361
Model C-709S, for Standard CH-100 Housing, Stainless Steel
50364
Model C-709HD, for Heavy-Duty CH-100HD Housing, Stainless Steel
50363
h.
Stainless Steel Ferrule
Description
Item No.ò
Model C-715 , for Standard Size Cable Housing
50423
Model C-715HD, for Heavy-Duty Cable Housing
50424
For Heavy Duty Cable Housing and Teflon® Liner
61445
i.
Adjustable Hanger
Model C-734. Accepts 1/16” (.159cm) or 3/64” (.119cm) cable. Sold each. From Hosmer.
Item No. ð
50434
PROSTHETICS
j.
Elbow Lock Cable Hanger
For 3/64” cable and 1/2” (1.27cm) tape. Sold each. From Hosmer.
Item No. ð
50747
590
Upper Extremity
PROSTHETICS
CABLE COMPONENTS — Continued
a.
Cable Hanger
Model No.
C-711
C-711A
C-711HD
C-711M
C-711MA
C-711C
C-711CA C-711CHD
Fits Cable Diameter
1/16”3/64”3/32”1/16”3/64”1/16”3/64”3/332”
(.159cm)(.119cm)(.238cm)(.159cm)(.119cm)(.159cm)(.119cm)(.238cm)
Fits Webbing
1” 1” 1” 3/4”3/4”1/2”1/2”1/2”
(2.54cm)(2.54cm)(2.54cm) (1.9cm) (1.9cm) (1.27cm) (1.27cm) (1.27cm)
Item No. ð
5037450377503835038450387503785038150382
b.
Anchor Plate
Model C-710C. Sold each. From Hosmer.
Item No. ð
50370
c.
Cross Bar
Stainless steel. Sold each. From Hosmer.
Description
Item No.ò
Model C-710A, Standard
50366
Model C-710AHD, Heavy-Duty
50367
d.
Leather Cross Bar
PROSTHETICS
Description
Item No.ò
Model C-710B, Standard
50368
Model C-710BHD, Heavy-Duty
50369
e.
Lift Assembly
Description
Item No.ò
Model C-712, Standard
50388
Model C-712HD, Heavy-Duty
50408
50401Screw, 10-32 1/4 Slotted Truss Head
50452
Forearm Lift Billet
PROSTHETICS
f.
Upper Extremity
591
Housing Cross Bar Assembly
Complete kit includes anchor plate, stainless steel cross bar, leather cross bar, and rivet. From Hosmer.
Description
Item No.ò
Model C-710, Standard
50365
Model C-710HD, Heavy-Duty
50373
g.
Nylon Detachable Suspension Clip
Description
Item No.ò
For 1/2” (1.27cm) Harness
55102
For 1” (2.54cm) Harness
55101
For 1-1/2” (3.81cm) Harness
55100
HARNESSES
h.
Northwestern Ring Harness Kit
High grade Dacron® straps. Stainless steel anchor ring prevents binding or bunching. Four bar buckles, axilla
loop “Y” strap and anterior suspension. Ready to fit. From Hosmer.
Description
Item No.ò
Model NRH-100, Adult, BE
51600
Model NRH-200, Adult, AE
51604
Adult, Bilateral
71787
51589 NRH-76, Stainless Steel Harness Ring, Small, 1-13/16” (4.6cm)
51589 NRH-86, Stainless Steel Harness Ring, Medium, 2-1/8” (5.4cm)
51601 NRH-101, Stainless Steel Harness Ring, Large, 2-7/16” (6.2cm)
Triceps Pad
Includes Dacron® straps. Sold each. From Hosmer.
Description
Item No.ò
Model BEC-140, Medium-Small
58338
PROSTHETICS
i.
Model BEC-160, Adult
50185
56231
Pad Only
j.
Axilla Loop Pad
Preshaped plastic tube pads and protects Dacron® tape. Sold each. From Hosmer.
Description
Item No.ò
Model ALP-75, Fits 1/2” Tape
50114
Model ALP-100, Fits 3/4” or 1” Tape
50115
592
Upper Extremity
PROSTHETICS
ELBOW DEVICES
a.
E-400 Elbow
Provides eight to eleven locking positions and accommodates a lift assist unit. Standard size. Use left or
right. Includes Caucasian elbow cap. Other sizes and elbow cap skin colors available. Sold each. From Hosmer.
Description
Item No.ò
Model E-400 (Outside Cable Exit), 11 Locking Positions
50650
Model E-400A (Inside Cable Exit), 11 Locking Positions
50651
Model E-400HD (Outside Cable Exit), Heavy Duty Saddle and Gear Sector, 8 Locking Positions 50653
50720 Short Sleeve
50665
Cork Washer
50730
Elbow Saddle Assy
50721
Long Sleeve50719Shaft50742Sheet Metal Screw
57497 Internal Assembly
50739
Outside Washer
50747
Hanger
50725 Cable Housing Assy
50724
Cable Assembly
50427
Anchor
50667
Lock Nut50729Washer50680
Bolt
50668
Belleville Washer50716Gear Sector50678Screw
50658
Turntable50748Yoke Assembly50722Bearing
b.
Forearm Lift Assist
For use with E-400 and E-200 elbows. Mounted medially or laterally. Supplied for installation on medial side
unless otherwise specified. Weight 1.5 oz (42g). Kit includes individual parts listed beneath kits. From Hosmer.
Description
Item No.ò
Kit, Left
50752
Kit, Right
50609
PROSTHETICS
50759
Lift Assist Assy, 50752
50764Case Bolt, 50609
54291 Lift Assist Assy, 50609 50770
Spring
50771 Screw Lock
50765
Dog Assembly, 50752
50768 Teflon Washer
53901
Dog Assembly, 50609
50769
Screw52022Washer
50762 Case Bolt, 50752
c.
Single Axis Below Elbow Hinge
A rugged hinge system designed for heavy duty use. Sold pair. From Hosmer.
Size
Small
Regular
Long
Lower Strap
4.5” (11.4cm)
4.5” (11.4cm)
4.5 (11.4cm)
Upper Strap
4.5” (11.4cm)
5-1/8” (13cm)
8-5/8” (21.9cm)
Weight
4.5 oz (126g)
6.5 oz (184g)
9.0 oz (255g)
Item No. ð518495185551856
51850 Lower Strap, Rt Small 51860
Lower Strap, Rt Reg
51860
Lower Strap, Rt Long
53550 Lower Strap, Left Sm
51859
Lower Strap, Left Reg 51859
Lower Strap, Lt Long
51851 Upper Strap, Small
51861
Upper Strap, Regular
51862
Upper Strap, Long
51853 Bearing, Small
51864
Bearing, Regular
51864
Bearing, Long
51852 Washer, Small
51863
Washer, Regular
51863
Washer, Long
51865
Stud, Small51865Stud, Regular51865Stud, Long
PROSTHETICS
Upper Extremity
593
DISCONNECT WRISTS
d.
Oval Friction Disconnect Wrist with Laminating Ring
Provides manual friction adjustment and quick disconnect feature. Free motion is achieved by depressing push
lever to the first position. At the second position, the insert disconnects from the wrist body. Laminating ring
is detachable. Measures 2.25” x 1.63” (5.7cm x 4.1cm). Product weight 4.3 oz (121.9g). Sold each. From Hosmer.
Item No. ð
58150
59526
Laminating Ring
58159 Body Assembly
58153Insert
58294 Screw (4)
52154 Allen Wrench
e.
Round Friction Disconnect Wrist with Laminating Ring
Provides manual friction adjustment and quick disconnect feature. Free motion is achieved by depressing
push lever to the first position. At the second position, the insert disconnects from the wrist body. Laminating
ring is detachable. Sold each. From Hosmer.
Description
Item No.ò
1.75” Diameter, 3.6 oz (102.1g)
58151
2” Diameter, 4.2 oz (119.1g)
58152
59523
Laminating Ring, 1-3/4”
58153Insert
59522 Laminating Ring, 2”
58282
Screw (4), 1-3/4”
58154 Body Assembly, 1-3/4” 58283
Screw (4), 2”
58155 Body Assembly, 2”
52154
Allen Wrench
58287 Nut Plate, 2”
f.
USMC Style Quick Disconnect Wrist, Round
Quick changes and pro/supination lock. Twelve locking positions. Light pressure indexes pro/supination.
Heavier pressure detaches terminal device completely. Push to lock. 2” (5.1cm) diameter. Aluminum. Sold
each. From Hosmer.
Thread
1/2-20
12mm
61866
Body61865Nut Plate61856Spring, .010
59522 Laminating Ring Body 61852
Pin Dowel
61857
Spring, .026
61860 Insert, 1/2-20
61853
Release Button
58286
Screw (5 required)
61861
Insert, 12mm61854Cover
g.
PROSTHETICS
Item No. ð
6186261863
USMC Style Quick Disconnect Wrist, Oval
Quick changes and pro/supination lock. Twelve locking positions. Light pressure indexes pro/supination.
Heavier pressure detaches terminal device completely. Push to lock. 1/2-20 thread. 2.25” x 1.62”. Aluminum.
Item No. ð
61922
61918
Body61865Nut Plate61856Spring, .010
59526 Laminating Ring Body 61852
Pin Dowel
61857
Spring, .026
61860 Insert, 1/2-20
61853
Release Button
51019
Screw (2 required)
61919Cover
594
Upper Extremity
PROSTHETICS
DISCONNECT WRISTS — Continued
a.
Quick Change Wrist
Designed for quick changes of the terminal device or its positions. Light pressure on the button unlocks the
wrist and permits free rotation of the hook or hand. Heavier pressure on the button allows terminal device
to be detached from the wrist. Pressure on the end of the terminal device will re-seat and lock it into position. Sold each. From Hosmer.
Description
Item No.ò
Model FM-100, Aluminum, 2” (5.1cm) Diameter, 3.25 oz (92g)
51043
Model FM-100S, Stainless, 2” (5.1cm) Diameter, 6 oz (170g)
51044
51045
Face Plate51055Insert Spring
51046
Yoke51057Screw
51049
Body, FM-10051058Spring
51051
Body, FM-100S51059Spring
51052 Insert, 1/2-20
51060
Gear Rack
58229 Insert, M12 x 1.5
b.
Quick Change Wrist with Laminating Ring
Designed for quick changes of the terminal device or its positions. Light pressure on the button unlocks the
wrist and permits free rotation of the hook or hand. Heavier pressure on the button allows terminal device to
be detached from the wrist. Pressure on the end of the terminal device will re-seat and lock it into position.
Model FM-100LR. Aluminum. 2” (5.1cm) diameter. Product weight 4.1 oz (116.2g). Sold each. From Hosmer.
Item No. ð
58297
58305
Body Assembly51046Yoke
59522 Laminating Ring
51059
Spring
58299
Body58283Screw (4 required)
58287
Nut Plate51045Face Plate
51060 Gear Rack
51057
Screw (6 Required)
51052
Insert, 1/2-2051058Spring
58229 Insert, M12 x 15
PROSTHETICS
c.
Quick Change Wrist
Permits quick changes of the terminal device or its position. Wrist face is rotated in one direction to allow
removal of terminal device, rotating in opposite direction will place terminal device in free rotation. Central
position of wrist face locks position. Sold each. From Hosmer.
Description
Item No.ò
Model WD-400, Aluminum Insert, 2”, Diameter, 3.75 oz (99g)
52127
Model WD-400S, Stainless Sleeve and Insert, 2” Diameter, 4.25 oz (120g)
52128
Model WD-400SS, Stainless Throughout, 2” Diameter, 7.1 oz (201.3g)
53896
52129
Body, WD-40054661Spring Lock
52130 Body, WD-400S
52136
Retaining Ring
52131 Body, WD-400SS
52139
Washer
50527 Insert, WD-400
55510
Felt Oiling Pad
50528 Insert, WD-400S/400SS 50873
Roll Pin
52133 Cover, WD-400/400S
50166
Screw
56009 Cover Assy, WD-400SS
PROSTHETICS
Upper Extremity
595
FLEXION WRISTS
d.
Sierra Flexion Wrist
Lever selects three positions, 0°, 25° or 50° of flexion. 1-7/16” (3.6cm) length. Product weight 4 oz (113g).
Standard 1/2-20 thread. Sold each. From Hosmer.
Item No. ð52371
52380
Base52301Screw
52375
Lever52790Pin
52466
Pin52378Plug
54954
Rocker52300
Set Screw
52372 Rocker Bushing
52376
Compression Spring
52379Cover
e.
Flexion Friction Wrist
May be flexed and locked at 0°, 30° and 50° using lever. Automatic locking. Easily adjusted friction resistance.
Recommended for use with hooks only. Also available with laminating ring. Sold each. From Hosmer.
Size
Item No.ò
Model
Diameter
Thread
Weight
Medium/Small
FW-300
1.75” (4.4cm)
1/2-20
2.5 oz (71g)
51084
Medium/Small
FW-300NM
1.75” (4.4cm)
12mm
2.5 oz (71g)
58220
Adult
FW-500N
2” (5.1cm)
1/2-20
3.25 oz (92g)
51100
Adult
FW-500NM
2” (5.1cm)
12mm
3.25 oz (92g)
58219
Adult, Stainless Steel
FW-500S
2” (5.1cm)
1/2-20
7.8 oz (221g)
51101
51085
Body, FW-30051089Lever Lock, FW-30051111Spring
51102 Body, FW-500
51117
Lever Lock, FW-500/S 51825
Screw, FW-300
51103 Body, FW-500S
51087
Locking Pin, FW-300
50571
Screw, FW-500/500S
51086 Cover, FW-300
51106
Locking Pin, FW-500/S 52155
Adjustment Screw
51104 Cover, FW-500
51114
Swivel Base, FW-3/500 52154
Allen Wrench
51105 Cover, FW-500S
52830
Swivel Base, FW-500S
PROSTHETICS
FRICTION WRISTS
f.
Friction Wrist
Permits terminal device to be rotated to any position. Friction is easily adjusted with set screw. Insert has
stainless steel lead threads. Laminating ring version also available. Sold each. From Hosmer. See page 535
for pediatric sizes.
Size
Model
Diameter
Thread
Weight
Item No.ò
Medium/Small
WE-300N
1.75” (4.4cm)
1/2-20
2.0 oz (57g)
52156
Adult
WE-500N
2” (5.1cm)
1/2-20
2.6 oz (74g)
52160
52157
Body, WE-300N52152Screw
52166 Body, WE-500N
52155
Set Screw
52151 Insert Assembly
52154
Allen Wrench
596
Upper Extremity
PROSTHETICS
FRICTION WRISTS — Continued
a.
Oval Friction Wrist
Permits terminal device to be rotated to any position. Friction is easily adjusted with set screw. Recommended
for mechanical or passive hands. Laminating ring version also available. Sold each. From Hosmer.
Model
Length
Width
Thread
Weight
Item No.ò
OW-75N
2” (5.1cm)
1.5” (3.8cm)
1/2-20
2.0 oz (57g)
51618
Size
Medium/Small
Adult
OW-100N
2.25” (5.7cm) 1.63” (4.1cm)
1/2-20
2.6 oz (74g)
51623
51621 Body, OW-75N
52155Set Screw
51627 Body, OW-100N
52152
Face Screw
52151
Insert52154Allen Wrench
b.
UCLA CAPP Delrin® Body Friction Wrist
Constant friction is applied with a unique friction adjustment collar. Sold each. From Hosmer. See page 535
for pediatric size.
Description
Item No.ò
CAPP Wrist 1413, 1-3/4” (4.4cm) Diameter, 1 oz (28g)
55109
CAPP Wrist 1414, 2” (5.1cm) Diameter, 1.5 oz (42g)
55110
55106 Housing for 55109
52805 Housing for 55110
59711 Clamp Assembly
55313Allen Wrench
56661
Socket Head Screw
ECONOMY WRISTS
PROSTHETICS
c.
Economy Wrist
Stainless steel threaded bushing. Titanium version is lightweight and corrosion resistant. Sold each. From
Hosmer.
Description
Item No.ò
Model WE-500, Aluminum, 2” (5.1cm) Diameter, 2.25 oz (64g)
52159
Model WE-500S, Stainless Steel, 2” (5.1cm) Diameter, 4.75 oz (134g)
52162
Model WE-500T, Titanium
59491
52164
Body, WE-50052172Cover, WE-500
52831 Body, WE-500S
59464
Cover, WE-500S/500T
59490 Body, WE-500T
52173
Brass Washer
52171Rubber
PROSTHETICS
d.
Upper Extremity
597
Economy Wrist with Laminating Ring
Model WE-500LR. Sold each. From Hosmer.
Item No. ð
58690
59522
Laminating Ring52171Rubber
58693
Body52172Cover
58692 Nut Plate
52173
Washer (2 Required)
58283 Screw (4 Required)
e.
Economy Wrist with Straps
Anchor straps provide heavy duty version of the Economy Wrist. Sold each. From Hosmer.
Description
Item No.ò
Model WE-500SL, Stainless Steel, 2” (5.1cm) Diameter, 6.0 oz (170g)
52163
Model WE-500T, Titanium, 2” (5.1cm) Diameter, 5.0 oz (140g)
59463
52169
Body, WE-500SL
59462 Body, WE-500T
52171Rubber
59464Cover
52173 Brass Washer
HOOKS
f.
Hook Model 5
Adult size. Canted fingers, serrated holding surfaces. Stainless steel. 4-7/8” (12.4cm). Product weight 8.0 oz
(227g). Standard 1/2-20 thread. Sold each. From Hosmer.
Side
Left
Right
PROSTHETICS
Item No. ð
5500355004
g.
Hook Model 5X
Adult size. Canted fingers, nitrile rubber lined. Stainless steel. 4-7/8” (12.4cm). Product weight 7.5 oz (213g).
Side
Left
Right
Item No. ð
5500955010
598
Upper Extremity
PROSTHETICS
HOOKS — Continued
a.
Hook Model 5XA
Adult size. Canted fingers, nitrile rubber lined. Aluminum. 4-7/8” (12.4cm). Product weight 4.0 oz (113g). Sold
each. From Hosmer.
Thread/Side
Item No. ð
1/2-20 Left
1/2-20 Right
12mm Left
12mm Right
55012 5501361981 61973
b.
Hook Model 5XTi
Adult size. Canted fingers, nitrile rubber lined. Titanium. 4-7/8” (12.4cm). Product weight 4.17 oz (118.39g).
Non-magnetic. Standard 1/2-20 thread. Sold each. From Hosmer.
Thread/Side
Left
Right
Item No. ð
6233262331
c.
Hook Model 555
Adult size. Lyre fingers, nitrile rubber lined. Aluminum. 5-1/4” (13.3cm). Product weight 4.5 oz (121g). Sold
each. From Hosmer.
Thread/Side
Item No. ð
1/2-20 Left
1/2-20 Right
12mm Left
12mm Right
550595506061978 61979
d.
Hook Model SS-555
PROSTHETICS
Adult size. Lyre fingers, nitrile rubber lined. Stainless steel. 5-1/4” (13.3cm). Product weight 8.5 oz (241g).
Side
Left
Right
Item No. ð
5506255063
e.
Hook Model 6
Adult size. Serrated holding surfaces. Heavy duty design for tool holding. Backlock. Stainless steel. 5-1/2”
(14.9cm). Product weight 14.0 oz (397g). Standard 1/2-20 thread. Sold each. From Hosmer.
Side
Left
Right
Item No. ð
5501555016
PROSTHETICS
f.
Upper Extremity
599
Hook Model 7
Adult size. Serrated holding surfaces. Heavy duty design for tool holding, featuring bucket hook, nail and
chisel holders. Stainless steel. 4-7/8” (12.4cm). Product weight 10.5 oz (298g). Sold each. From Hosmer.
Side
Left
Right
Item No. ð
5502155022
g.
Hook Model 7LO
Adult size. Serrated holding surfaces. Heavy duty design for tool holding. Knife, pail and nail holder. Opening
for broom handle or chisel holder. 1-3/8” finger opening. Stainless steel. 5” (13.3cm). Product weight 11.0 oz
(312g). Sold each. From Hosmer.
Side
Left
Right
Item No. ð
5502455025
h.
Hook Model 88X
Medium adult size. Canted fingers, nitrile rubber lined. Aluminum. 4-5/8” (11.7cm). Product weight 4.0 oz
(113g). Sold each. From Hosmer.
Thread/Side
Item No. ð
1/2-20 Left
1/2-20 Right
12mm Left
12mm Right
55035 5503661992 61975
HOOK ACCESSORIES
i.
Driving Ring
PROSTHETICS
Attaches quickly and easily to automobile steering wheel, boat tiller and aircraft controls. Sold each. From
Hosmer.
Item No. ð
56394
56389
Driving Ring Body56354Bushing
56395 Coated Core Assembly 56387
Clamp
56706
Washer51760Screw (4 required)
56705Nut
j.
E-Z Hook Tension Band Applicator
Six hook tension bands included. Sold each. From Hosmer.
Item No. ð
55144
600
Upper Extremity
PROSTHETICS
HOOK ACCESSORIES — Continued
a.
Hook Tension Bands
Each band applies approximately 1.5 lb of prehension. Sold package. From Hosmer.
Description
Item No.ò
4 oz, Approximately 80 Count
53869
8 oz, Approximately 160 Count
53870
1 lb, Approximately 320 Count
53871
b.
Hook Rings
50% greater force than rubber bands. 0.5” OD x 0.17” ID. Available in green only. 100 per pkg. From Hosmer.
Item No. ð
57500
c.
Hook Tension Spring
Stainless steel spring may be used in place of rubber band. Each spring applies approximately 9 lbs of prehension. Sold each. From Hosmer.
Item No. ð
55363
PROSTHETICS
HANDS
d.
Hosmer Soft Voluntary Opening (SVO) Hand for Adult Male
Size corresponds to Metacarpal-Phalangeal circumference. Adjustable prehension from 2-6 lb. Lightweight,
rugged construction. No maintenance required. Standard 1/2-20 or 12mm thread. Standard (dorsal) or palmar
cable exit. Sold each. From Hosmer.
MCP Circ
7.75”7.75”8.25”8.25”7.75”7.75”8.25”8.25”
Length
5-3/8”5-3/8”5-3/8”5-3/8”5-3/8”5-3/8”5-3/8”5-3/8”
Weight
10.9 oz
Cable Exit
10.9 oz
11.3 oz
11.3 oz
10.9 oz
StandardStandardStandardStandard Palmar
Side
10.9 oz
11.3 oz
11.3 oz
Palmar
Palmar
Palmar
LeftRightLeftRightLeftRightLeftRight
6106661065610686106761486614856148861487
1/2-20
12mm
6199361994620066200561991619926200862007
Glove No.
3070330704307073070830703307043070730708
Regal No.
100MLLZZ100MRLZZ100MLLKK100MRLKK100MLLZZ100MRLZZ100MLLZZ100MRLZZ
56760Hosmer Color Swatch Book
PROSTHETICS
601
HIP SYSTEMS
c.
Littig™ Hip Disarticulation System
With the Littig Hip strut system, a prosthesis can now be made to proper length to completely eliminate
vaulting. Energy in the form of flexion is introduced into the composite hip strut during weight bearing. By
varying the amount of pelvic thrust at toe-off, the patient can selectively release energy and control the
forward speed of the knee in motion. The action provides a controlled foot rise and effectively shortens the
prosthesis at mid swing to allow variability in toe clearance. From Trulife.
Rated to 220 lb (100kg). System includes hip joint, 14” strut and 10° adapter for modular pyramid knee attachment. Cutting and Drilling Fixture for carbon composite struts available (T28800).
Selection Guide by Patient Weight
Strut Length
100-130 lb
(45-59kg)
131-160 lb
(60-72kg)
161-190 lb
(73-86kg)
191-220 lb
(87-100kg)
12” to 14”
Medium
Firm
Firm
X-Firm
10” to 12”
Medium
Medium
Medium
Firm
8” to 10”
Soft
Medium
Medium
Firm
6” to 8”
Soft
Soft
Medium
Medium
Flexion
Soft
Medium
Firm
X-Firm
Complete System
P28481 P28482P28483 P28484
14” Strut Only
25181
25183
25185
25187
P28480Hip Joint Only
d.
7E5 Modular Single-Axis Hip Joint with Lock
Recommended for K1. Features a built-in lock which automatically secures the joint in extended position.
Flexion and extension are adjusted by sliding the extension stop or the tube. Hip rotation is adjustable; for
sitting, it can be disengaged using a lever. Aluminum construction. 120° joint flexion. Rated to 220 lb. Product
weight 890g. 12 month warranty. From Ottobock.
Description
Left
Right
Item No. ð
7E5=L
7E5=R
7E4 Modular Single-Axis Hip Joint with Extension Assist
PROSTHETICS
e.
Recommended for K2. Features include extension assist with lateral latex bands for stride control and builtin adjustable extension stop bumper. Similar to the 7E5; extension assist limits range of joint motion while
walking. Aluminum construction. 120° joint flexion. Rated to 220 lb. Product weight 875g. 12 month warranty. From Ottobock.
Item No. ð
7E4
602
P r os t h e t ics
HIP SYSTEMS — Continued
a.
7E7 Modular Single-Axis Hip Joint with Internal Extension Assist
Recommended for K2-K3. Features continuously adjustable extension assist located in the lower section of
the joint. Low structural height minimizes the pelvic tilt in the seated position. Abduction/adduction, flexion/
extension and rotation can be continuously adjusted. Upper section of joint is screwed to the lamination plate
in the socket and connected to the lower joint section through the hip’s axis. Titanium construction. 130° joint
flexion. Rated to 220 lb. Product weight 875g. 12 month warranty. From Ottobock.
Item No. ð
7E7
b.
Finishing Kit for Modular Hip Prosthesis
Sold kit. From Ottobock.
Item No. ð
4R32
PROSTHETICS
HIP COMPONENTS
c.
Pelvic Band
Offers rotational control in conjunction with the hip joint and hip belt. For use in belt style prosthetic suspension systems. May be cut or shaped. Sold each. From Trulife.
Material
Steel
Aluminum
Plastic
Product Weight
280g
98g
35g
Item No. ð
P023300000P023200000P023100000
PROSTHETICS
d.
603
Hip Joint, Sargent Roy
Drop-forged steel. 10-1/4” length. Sold each. From Hosmer.
Description
Item No.ò
Standard, 5/8” Thickness, 1-1/4” Width
52624
Small, 1/2” Thickness, 1” Width
52625
e.
Hip Joint, US Steel
Used for attachment from the transfemoral socket to the hip belt. Adds length to increase the leverage to
control the lateral motion of the prosthesis. Clevis type. Provides maximum stability in all planes. Product
weight 382g. Sold each. From Trulife.
Description
Item No.ò
Hip Joint Only
P022200000
Kit (Includes washer, nut, pin and bearing)
P0222STEEL-KIT
24317-001
Nylatron Bearing, 1/2 x 5/8
f.
Hip Joint, Plastic
Used for attachment from the transfemoral socket to the hip belt. Added length increases leverage to control the lateral motion of the prosthesis. Assists in transverse rotation. 6mm (1/4”) polypropylene. Product
Description
Item No.ò
Hip Joint Only
P022100000
Kit (Includes bearing nut, washer and screws)
P02221PLAS-KIT
g.
Hip Joint, Stainless Steel
Used for attachment from the transfemoral socket to the hip belt. Added length increases leverage to control the lateral motion of the prosthesis. Provides moderate stability in all planes. Sold each. From Trulife.
Item No.ò
Heavy-Duty Version: 3mm (1/8”) Thickness, Weight 234g
P0223HD000
Lightweight Version: 2mm (3/32”) Thickness, 1-1/4” (32mm) Width, Weight 166g
P0223RG000
PROSTHETICS
Description
Lightweight Version: 2mm (3/32”) Thickness, 1” (25mm) Width, Weight 130g
P0223SM000
P0223HD-KIT
Heavy Duty Kit (Includes washers, pins and nut)
P0223LTWT-KIT Lightweight Kit (Includes washers, pins and nut)
h.
Hip Joint, Titanium
Used for attachment from the transfemoral socket to the hip belt. Added length increases leverage to control
the lateral motion of the prosthesis. Provides very good stability in all planes. 3mm (1/8”) thickness. Product
Item No. ð
P0223HD001
604
P r os t h e t ics
MICROPROCESSOR KNEES
a.
REL-K™ Microprocessor Knee System
The REL-K is the latest generation of microprocessor knees which promises amputees the ability and freedom
to navigate their environment with simplicity and ease. With six modes of control, the patient can walk, run,
negotiate slopes, climb stairs, or ride a bicycle. Since the control system is located proximally, most foot and
pylon combinations can be used unlike other systems that restrict ankle and foot combinations. The knee’s
composite frame was developed by Italian sports car designers for high-strength and cosmetic appeal. The
hydraulic unit evolved from a design used in F1 racing for speed and accuracy of control. From Fillauer.
Item No. ð
DISCON
b.
Single Axis Intelligent Knee
Users can walk naturally without feeling awkward using the NI-C111t from Nabtesco. The Intelligent Knee
was the world’s first computerized knee. At each step, the microprocessor monitors the user’s walking speed,
and automatically controls the swing speed of the knee joint. Rated to 220 lb. Maximum flexion 160°. Sold
each. From Nabtesco Proteor-USA.
Item No. ð
8111-2700088-11
PROSTHETICS
PROSTHETICS
c.
605
4-Bar Intelligent Knee
Users can walk naturally without feeling awkward using the NI-C421 from Nabtesco. The Intelligent Knee
was the world’s first computerized knee. At each step, the microprocessor monitors the user’s walking speed,
and automatically controls the swing speed of the knee joint. Rated to 220 lb. Sold each. From Nabtesco
Proteor-USA.
Item No. ð
8111-2700380-01
d.
Hybrid Knee
A highly accurate yielding function is embodied in the new Hybrid Knee from Nabtesco. To the controlled
power of the hydraulic system, soft pneumatic control has been added. This fusion of microprocessor controlled technologies gives you a hybrid system that prevents unnerving buckling at the knee, and enables easier
walking in greater comfort. Rated to 276 lb. Maximum flexion 140°. Sold each. From Nabtesco Proteor-USA.
Description
Item No.ò
Hybrid Knee with Pyramid
8111-2700296-01
Hybrid Knee with Threaded Head
8111-2700296-02
e.
Polycentric Knee Joint with Integrated Extension Assist
Features an extension stop to allow adjustment of the instantaneous center of rotation. Swing phase settings can be continuously adjusted through the axis friction and extension assist. Titanium. Knee flexion
angle 110°. Activity level K1, K2. Rated to 220 lbs. Product weight 445g. Height (knee center to upper edge
of pyramid) 30mm. From Ottobock.
PROSTHETICS
POLYCENTRIC KNEES
Item No. ð
3R36
4D13
Spare Parts Pack for 3R36 and 3R20
606
P r os t h e t ics
POLYCENTRIC KNEES — Continued
a.
Polycentric Knee Joint with Hydraulic Swing Phase Control
Features include built-in hydraulic cylinder for controlled swing phase and independently adjustable flexion
and extension resistance. Titanium. Knee flexion angle 112°. Activity level K3, K4. Rated to 275 lbs. Product
weight 730g. Height (knee center to upper edge of pyramid) 40mm. From Ottobock.
Item No. ð
3R55
b.
Polycentric Knee Joint for Knee Disarticulation with Hydraulic Swing Phase Control
Utilizes the swing axis and brake axis as a load-dependent brake. Axis friction and the extension assist are
adjustable for improved control of swing phase. Titanium. Knee flexion angle 150°. Activity level K1, K2.
Rated to 220 lbs. Product weight 360g. Height (knee center to upper edge of pyramid) 40mm. From Ottobock.
Item No. ð
3R49
3R15Single Axis Knee Weight Activated Brake
21Y70=N Protective Sleeve for 3R49 and 3R15
4D1Service Pack for 3R15, 3R49 and 3R42
PROSTHETICS
c.
Polycentric Knee Joint for Knee Disarticulation with Lock
Features a detachable lamination anchor which connects the knee to the socket. Adjustable lock secures
knee in extension; lock is released using the remote lock release. Titanium. Knee flexion angle 110°. Activity
level K1, K2. Rated to 275 lbs. Product weight 655g. Height (knee center to upper edge of pyramid) 18mm.
From Ottobock.
Item No. ð
3R32
4F34
Lock Unit Control for 3R23, 3R32, 3R33 and 3R40
PROSTHETICS
607
KNEE DISARTICULATION
d.
Polycentric Knee Joint for Knee Disarticulation with Mechanical Extension Assist
Features a detachable lamination anchor with rotation adjustment which connects the knee to the socket.
Spring extension assist and axial friction are both adjustable. Titanium. Knee flexion angle 110°. Activity
level K1, K2. Rated to 275 lbs. Product weight 655g. Height (knee center to upper edge of pyramid) 18mm.
From Ottobock.
Item No. ð
3R30
e.
Polycentric Knee Joint for Knee Disarticulation with Hydraulic Swing Phase Control
Features include separately adjustable flexion and extension resistance and low build height above the knee
to accommodate long residual limbs and knee disarticulation patients. Titanium. Knee flexion angle 110°.
Activity level K3, K4. Rated to 275 lbs. Product weight 740g. Height (knee center to upper edge of pyramid)
18mm. From Ottobock.
Item No. ð
3R46
4D13
Spare Parts Pack for 3R46 and 3R46=1
f.
Polycentric 4-Bar Knee
Best suited for low functional level and high need for safety, this knee features adjustable A-P slide and
rotation proximally. Lightweight aluminum frame with aircraft alloy 4 bar linkage. Rated to 275 lb (125kg).
Product weight 629g. 2 year warranty. From ST&G.
Description
Item No.ò
with Pyramid Adapter 1321AP
with Lotus Adapter for Knee Disarticulation
1321AL
PROSTHETICS
4-BAR KNEES
608
P r os t h e t ics
4-BAR KNEES — Continued
a.
Polycentric Pneumatic 4-Bar Knee
Features pneumatic swing control and offers ultra smooth walking movement. Adjustable A-P slide and
rotation proximally. Lightweight aluminum frame with aircraft alloy 4 bar linkage. Rated to 275 lb (125kg).
Product weight 880g (1322AP) and 893g (1322AL). 2 year warranty. From ST&G.
Description
Item No.ò
with Pyramid Adapter (pictured)
1322AP
with Lotus Adapter for Knee Disarticulation
1322AL
b.
Swan Knee
The Swan multi axial stance flexion hydraulic knee from ST&G features 5-bar linkage to prevent knee buckling. At heel-contact, the knee joint bends slightly to minimize shock. At the same time the two vertical links
become nearly parallel and the center of rotation moves instantly to upper and posterior position of the hip
joint, preventing further flexion of the knee joint. After mid-stance the knee extends slowly and returns to
basic 4-bar linkage to allow knee flexion in swing-phase. Two models to choose from. Sold each. From ST&G.
Specifications
Model No: Product Weight:
Overall Length:
Overall Width
Maximum Flexion:
Weight Limit:
MO780
670g
194mm
63mm
150°
165 lb (75kg)
Item No. ð
MO780
MO786
840g
194mm
71mm
150°
220 lb (100kg)
MO786
PROSTHETICS
c.
Seattle Natural Stance Flexion Knee
Features 7° of adjustable stance flexion, friction swing phase control, extension assist, integrated proximal
pyramid and distal tube adapter. Provides shock absorption at heel strike. Recommended for AK low to
moderate activity, K1-K2. Rated to 220 lb (100kg). Product weight 783g. Sold each. From Trulife.
Item No. ð
SSK617
PROSTHETICS
d.
609
Seattle Natural Knee
Polycentric, 4-bar, friction control knee. Features adjustable flexion controls and extension assist. Available
with integrated proximal pyramid or attached disarticulation bracket. Recommended for AK low to moderate
activity, K1-K2. Rated to 220 lb (100kg). Sold each. From Trulife.
Description
Item No.ò
Seattle Natural Knee (pictured)
SSK602A
Seattle Natural Knee with Disarticulation Bracket
SSK604A
SSK602A-KITRefurbishment Kit for SSK602A
SSK604A-KIT
Refurbishment Kit for SSK604A
SSK604A-PYR
Pyramid Adapter for SSK604A
SSK604A-DIS
Replacment Laminating Bracket for SSK604A
HYDRAULIC KNEES
e.
Endurance Hydraulic 160 Knee System
Features include standard size 160mm hydraulic unit, swing and stance phase hydraulic control, 360° proximal
rotation adjustment and adjustable yield rate. 15° flexion. Sturdy through bolt design. Four proximal adapters
available. Rated to 300 lb. Kit includes hydraulic unit, mounting kit, knee frame with proximal adjustment
screw and knee cap. From Hosmer.
Item No. ð
62041
62202
Pyramid Receiver, Female Dovetail, Lock Screws
62203 Threaded Adapter, Female Dovetail, Lock Screws
62204 4-Hole Plate, Female Dovetail, Lock Screws
62205 Pyramid, Female Dovetail, Lock Screws
60254 4-Hole Pyramid Adapter w/Through Hole (Titanium), Lock Screws
60416 4-Hole Pyramid Adapter (Stainless Steel), Lock Screws
Entegra Hydraulic 180 Knee System
Features include standard size 180mm hydraulic unit, swing and stance phase hydraulic control, 360° proximal rotation adjustment and adjustable yield rate. 15° flexion. Sturdy through bolt design. Hydraulic unit is
interchangeable with other frames using Mounting Kit (62206). Four proximal adapters available. Rated to
300 lb. From Hosmer.
PROSTHETICS
f.
Item No. ð
62449
61783
4-Hole Adapter with Bolt (61569) M10 x 18mm
61784 Pyramid Adapter with Bolt (61340) M10 x 30mm
61785 Slide Adapter with Bolt (61569) M10 x 18mm
61786 Threaded Adapter with Bolt (61246) M10 x 25mm
61804 Cover, Translucent Blue
61807 Bearing Replacement Kit
610
P r os t h e t ics
HYDRAULIC KNEES — Continued
a.
6-Bar Symphony Knee
The 6-Bar Symphony Knee from Nabtesco has a stance-flexion feature that, while allowing a slight amount
of flexion, instantly locks to prevent sudden buckling of the knee. It also has a hydraulic system that eases
the initiating swing. The knee joint seamlessly orchestrates then harmonizes stability of the stance phase and
smoothness of the swing phase. Rated to 276 lb. Maximum flexion 170°. Sold each. From Nabtesco Proteor-USA.
Description
Item No.ò
6-Bar Hydraulic Knee with Pyramid
8111-2700632-01
6-Bar Hydraulic Knee with Threaded Head
8111-2700632-02
6-Bar Hydraulic Knee with Pyramid and Lock
8111-2700640-01
6-Bar Hydraulic Knee with Threaded Head and Lock
8111-2700640-02
b.
Seattle Black Max with Titanium Frame
Single-axis, hydraulic, titanium framed knee. Features smooth flexion and is available with a proximal 4-hole
or pyramid attachment. DIstal 4-hole configuration. Recommended for AK medium to high activity level K3K4. Rated to 300 lb (136kg). Sold each. From Trulife.
Description
Item No.ò
Seattle Black Max with Titanium Frame, Titanium Pyramid and Trulife SNS Unit (119° Flexion)
P25613
Seattle Black Max with Titanium Frame, 4-Hole Config and Trulife SNS Unit (119° Flexion)
P25623
PROSTHETICS
BM-STKService Tool Kit
P24900
Alignment System Kit, Small
P24901
Alignment System Kit, Large
DISCON
Trulife SNS Hydraulic Unit, Standard
P25627
Through Shaft with Mauch SNS Unit
P41740
Replacement Nyliner Kit
SBMKIT-STAND Replacement Knee Bearing Kit, Short
c.
Seattle Black Max Short
Compact version of Black Max. Single-axis, hydraulic design. Aluminum frame with 4-hole attachment.
Recommended for AK medium to high activity level K3-K4. Rated to 300 lb (136kg). Sold each. From Trulife.
Item No. ð
P37201
BM-STKService Tool Kit
P22282
Black Max Short Knee Shaft
P24900
Alignment System Kit, Small
P24901
Alignment System Kit, Large
Replacement Nyliner Kit
P41740
P22287
Replacement Knee Cap, Black
P22285
Replacement Knee Cap, Caucasian
SBMKIT-SHORT Replacement Knee Bearing Kit, Short
PROSTHETICS
611
PNEUMATIC KNEES
d.
Spectrum 4-Bar Pneumatic Knee
Precision adjustable pneumatic system with four interchangeable springs. Glide-Flex® action provides control
and stability through the gait cycle. Modular proximal adapters ensure attachment compatibility. Anatomically accurate 4-bar design. Rated to 300 lb. From Hosmer.
Item No. ð
61245
61783
4-Hole Adapter w/Bolt, M10 x 25mm
61784 Pyramid Adapter w/Bolt, M10 x 40mm
61337 Slide Adapter w/Bolt, M10 x 28mm
61786 Threaded Adapter w/Bolt, M10 x 35mm
e.
Pneumatic Single Axis Knee with Weight Activated Lock
Made of aluminum alloy and titanium, the 1320A is a durable knee in a compact size. Designed for up to
moderate activity level patients with good balance and stability, it is a single axis knee with pneumatic swing
control. Independent flexion and extension swing adjustment allows for fine adjustments of swing phase.
Product weight: 870g. Rated to 100kg. From ST&G.
Item No. ð
1320A
Seattle Select Stance Flexion Knee
Polycentric, pneumatic 5-bar knee features 9° of adjustable stance flexion, shock absorption at heel strike
and independently adjustable pneumatic flexion and extension control. Available with built-in proximal
pyramid or threaded adapter. Recommended for K3-K4. Rated to 220 lb. Product weight 2.3 lb (SSK615) and
2.2 lb (SSK615-THR). 2 year warranty. From Trulife.
Description
Item No.ò
with Proxmial Pyramid (pictured)
SSK615
PROSTHETICS
f.
SSK615-THR
with Threaded Proxmial Adapter
SCA2373-Prong Threaded Lamination Anchor, Stainless Steel
SCA212
4-Hole Rotatable base
612
P r os t h e t ics
SAFETY KNEES
a.
Weight Activated Locking Knee (WALK)
Brakes on weight bearing for an extra degree of stability. Independent friction and stabilizing sensitivity
adjustment controls. Patella and Adjustable Extension Assist included with knee. From Hosmer.
Description
Item No.ò
Titanium, Rated to 300 lb (350g)
60794
Aluminum, Rated to 220 lb (316g)
60785
60825
Extension Assist Kit
60709Patella
b.
Stabilized Pyramid Knee (SPK)
Economically priced, weight activated braking knee. Locks on weight bearing for an extra degree of stability.
Independent friction and stabilizing sensitivity adjustment controls. Patella and Adjustable Extension Assist
included with knee. Rated to 220 lb. (316g). Product weight 453g. From Hosmer.
Item No. ð
60236
59949
59941Patella
c.
Seattle Safety Knee
Stance stability is accomplished with a weight activated load brake. Friction control is provided to adjust the
resistance between the knee axis and the brake during the swing phase. Teflon® impregnated bushing for
longer life. Higher durometer urethane bumpers for improved braking action. Extension assist (included)
may be added for smooth and reliable function. Rated to 220 lb (100kg). From Trulife.
Description
Item No.ò
Titanium, Weight 362g
SSK335
Stainless Steel, Weight 524g
SSK635
PROSTHETICS
SSK603-EXTExtension Assist
SSK603-CVR
Cover
d.
Stabilized Knee
A perfect choice for less active transfemoral amputees. This weight-activated stance control knee features a
stainless steel wave spring extension assist which allows for a smoother gait while aiding in noise reduction.
Rated to 250 lb. From WillowWood.
Description
Item No.ò
Titanium, Standard, Weight 357g
STK-221
Titanium with Extension Assist, Weight 447g
STK-222
Stainless Steel, Standard, Weight 525g
STK-223
Stainless Steel with Extension Assist, Weight 619g
STK-224
STK-004Protective Cover
STK-100
Extension Assist Assembly
STK-003
Spring Adjustment Clamp
PROSTHETICS
e.
613
GeoFlex Knee
A friction-controlled polycentric knee created for amputees who need stability but do not want a manual
locking knee. Well suited to patients with activity levels K1 and K2. 20° of flexion under load. Built-in Stance
Flexion feature allows for natural bending motion at the knee, creating a smoother stride. Roller bearing
design allows for increased durability and longevity. Rated to 250 lb. From WillowWood.
Description
Item No.ò
GEO-200
4-Hole Pattern Proximal, Tube Clamp Distal, Weight 768g
GEO-021
Elastic Extension Assist
GEO-025
Threaded Clamp Adapter
GEO-022
Dust CoverGEO-0324-Hole Threaded Adapter
GEO-023 Bumper Replacement Kit
FND-228002 AK Rotatable 3-Prong Base
f.
GeoLite Knee
One of the lightest and shortest friction-controlled polycentric knees available. Suitable for levels K1 and K2.
Sharing many of the characteristics of the GeoFlex Knee, the GeoLite Knee will return to full extension when
flexed up to 20° under load without the use of any mechanical locks. Rated to 250 lb. From WillowWood.
Description
Item No.ò
4-Hole Pattern Proximal, Tube Clamp Distal, Weight 468g
GEO-500
GEO-021
Elastic Extension Assist
GEO-025
Threaded Clamp Adapter
GEO-022
Dust CoverGEO-0324-Hole Threaded Adapter
GEO-023 Bumper Replacement Kit
FND-228002 AK Rotatable 3-Prong Base
SINGLE AXIS KNEES
g.
Single Axis Friction Knee (SAFK)
A compact knee ideal for moderately active patients. Provides easily accessible, adjustable constant friction.
Patella and Adjustable Extension Assist included with knee. From Hosmer.
Description
Item No.ò
Titanium, Rated to 300 lb (350g)
60821
60825
60709Patella
h.
PROSTHETICS
Aluminum, Rated to 220 lb (316g)
60823
Single Axis Locking Knee (SALK)
Designed for geriatrics and amputees with a lower activity level. Interchangeable with similar knees measuring
35mm from knee center to top of pyramid. Permanently lubricated bearing protects the axis from wear and
provides quiet operation. Patella and Fabric Sheath (included) provide a smooth radius for better cosmesis. Lock
cable can be located on either side of knee. Aluminum. Rated to 220 lb. Product weight 264g. From Hosmer.
Item No. ð
60471
60847
Lock Release Assembly56191Cable Housing
61088
Cable Assembly60475Fabric Knee Sheath
50427 Cable Housing Anchor
614
P r os t h e t ics
SINGLE AXIS KNEES — Continued
a.
Modular Single Axis Knee Joint
Features include internal extension assist and adjustable constant friction. Locking occurs automatically at
full extension via the extension assist springs. Stainless steel. Knee flexion angle 120°. Activity level K1. Rated
to 330 lbs. Product weight 530g. Height (knee center to upper edge of pyramid) 37mm. From Ottobock.
Item No. ð
3R22
b.
Single Axis Knee Joint with Lock and Extension Assist
Features include an adjustable lock which secures the knee joint in extension and is released using the remote
lock release. Locking occurs automatically at full extension via the extension assist springs. Titanium. Knee
flexion angle 120°. Activity level K1. Rated to 275 lbs. Product weight 530g. Height (knee center to upper
edge of pyramid) 39mm. From Ottobock.
Item No. ð
3R33
4F34 Lock Unit Control for 3R23, 3R32, 3R33 and 3R40
4D10
Spare Parts Pack for 3R33 and 3R17
c.
LIghtweight Single Axis Knee Joint with Lock
PROSTHETICS
Features include proximal pyramid adapter and integrated 30mm distal clamp. Adjustable manual lock in
lower joint section secures the joint in the extended position; lock is released using remote lock release.
Positive lock prevents accidentally unlocking during a flexion moment. Aluminum. Knee flexion angle 155°.
Activity level K1. Rated to 220 lbs. Product weight 290g. Height (knee center to upper edge of pyramid)
34mm. From Ottobock.
Item No. ð
3R40
4F34 Lock Unit Control for 3R23, 3R32, 3R33 and 3R40
4D16 Spare Parts Pack for 3R40
d.
Single Axis Locking Knee
For patients that require a stable knee or that have a short residual limb. Spring loaded extension lock can
be set at the locked or unlocked position. Titanium. Rated to 220 lb (100kg). Product weight 380g. Sold each.
From Trulife.
Item No. ð
SSK608
PROSTHETICS
e.
615
Dolphin Knee
Lightweight, slim and compact, the Dolphin Hydraulic Single Axis Knee with easy pre-swing has a knee axis
positioned aft. This provides excellent stability at an early stance phase, making it possible to use less muscle
strength to be in voluntary control of the knee joint. Dolphin can be used by those who are capable of voluntary
control, those who have been using it by keeping the brake sensitivity of a load brake to a minimum, as well
as those currently using a floating single axis knee. Dolphin is rated to 220 lb (100kg). Sold each. From ST&G.
Item No. ð
MO703
EXOSKELETAL DURATHANE SETUPS
f.
Universal Durathane Setup
Use on either right or left leg. Will accept Dupaco Hydraulic Multiplex control units. Sold each. From Hosmer.
Calf Length
13-1/4”
15-1/2”
Item No. ð
54938
54932
55925 Knee Only
70845
Knee Bolt Screw
71785
Knee Bolt Nyliner
72336
Shin Only52267Shaft, 2-75”54992Shin Nyliner
70844 Knee Bolt Shaft
52270
Expansion Plug
59589
Knee Pad
g.
Dupaco Hydraulic Control
Designed to emulate the natural gait. Features independent variable flexion and extension resistance, and
automatic adjustment for rapid change of cadence. Multiplex models fit Entegra frame. From Hosmer.
Style
Multiplex
Item No. ð
Multiplex
Lite Phase
Standard
Lite Phase
Multiplex
PROSTHETICS
HYDRAULIC KNEE CONTROL UNITS
Standard
59797 6003070465 52211
616
Gait Analysis
P r os t h e t ics
GAIT ANALYSIS
a.
Galileo™
The Galileo Functional Level Assessment System from Orthocare Innovations is a groundbreaking technology
that scientifically tests patients’ functional levels and demonstrates treatment outcomes with quantified data
collected over a full week of real-world activity.
The Functional Level Indexes that appear at the top left corner of the Functional Level Report are calculated
based on comparisons to thousands of previous patient records. They provide a Functional Level, equivalent
to K-level with an additional decimal point of gradation, for each of three measures that the Centers for
Medicare and Medicaid Services (CMS) deems relevant to calculating overall K-level.
The Cadence Variability rating quantifies the patient’s ability to transition among various gait cadences. It is
calculated based on the amount of time the patient spends within the various gait ranges that are indicated
by the colored bars on the ambulation report (orange bar = 0–15 steps per minute, yellow bar = 16–40 steps,
and white bar = 41 or more steps).
The Potential to Ambulate rating quantifies the patient’s current maximum ability to ambulate. It is calculated based on the most intense 1 minute of activity recorded during the data recording period. The rating
provides a measure similar to that provided by certain timed walking tests, such as the 10m Walk Test; the
patient should have componentry that supports this level of activity as needed, though the patient cannot
currently persist at this intensity.
Description
Item No.ò
Dock and Software
GK1000
GK3000Liscensing Fee
GK500
Activity Monitor
StepWatch Strap Pack
GK10
b.
Compas™
Compas™ is a breakthrough in easy-to-use, sophisticated instrumentation for clinical prosthetists. This unique
system of electronic hardware integrated into the prosthesis combines with computer software to harness
the power of objective kinetic gait data to ensure optimal outcomes in everyday prosthesis fitting.
Designed from the beginning to fit in with a standard prosthetics practice, application of Compas™ is as easy
as using any pyramid adaptor. The Smart Pyramid™ sensor mates to the Compas™ Master unit which provides
power, microprocessor control, motion sensing, a laser guide and communications.
PROSTHETICS
The system continuously measures the dynamic forces and balance while the client is walking in your chosen
setting. No laboratories, no special setup and no specialized staff are required. From Orthocare Innovations.
Description
Item No.ò
Compas™ Master Unit
CO1001
Smart Pyramid™
SP1001
TCA1001
Tube Clamp Adapter
PROSTHETICS
617
SOCKETS
a.
Carbon Fiber Socket with Connector
2 layers of carbon fiber braid, 14” or 16” socket length. Connector available in 6” or 8” diameter. Two styles.
From American Prosthetic Components.
Connector Diameter
6” x 14”
8” x 14”
6” x 16”
8” x 16”
with Titanium Pyramid
CPF2-806-14CPF2-808-14CPF2-806-16 CPF2-808-16
with European 4-Hole Pattern
CPF2-406-14 CPF2-408-14CPF2-406-16 CPF2-408-16
SOCKET BLOCKS
b.
The Coupler™
The Coupler™ Conical Block incorporates all the features of the Coupler™ Plate, except it comes with molded
urethane on the conical surface. This model should only be used in wet laminations. In many cases, the need
for filler is eliminated. Sealing and grinding are rarely necessary. Sold each. From Becker Orthopedic.
Item No. ð
P403005
c.
Socket Block
Rated to 300 lb (136kg). Sold each. From Hosmer.
Item No. ð
60267
60329
Screw, M6 x 10 x 20mm
60281 Laminating Cover
Socket Attachment Block
PROSTHETICS
d.
Wood. Sold each. From Ottobock.
Description
147mm
120mm
120mm
Item No. ð
5R1=1 5R1=65R1=6-H
618
PROSTHETICS
SOCKET BLOCKS — Continued
a.
Socket Attachment Block
Aluminum. For thermoforming. Rated to 220 lb (100kg). Sold each. From Ottobock.
Minimum Clearance
22mm
21mm
20mm
400mm
320mm
250mm
Product Weight
160g
135g
115g
Item No. ð
5R6=15R6=2 5R6=3
b.
Rigid Foam Laminating Block
Constructed using high strength rigid polyurethane foam around a nylon core. Easily shaped. Rated to 300
lb (136kg). Sold each. From Trulife.
Description
Item No.ò
Standard, 2-1/2” (64mm) Height, Weight 313g
SLB210
Concave, 2-1/2” (64mm) Height, Weight 294g
SLB220
Low Profile, 1-1/4” (32mm) Height, Weight 140g
SLB230
c.
Laminated Socket Attachment Block with Rigid Foam
Rated to 350 lb (160kg) for levels K1-K3 and 300 lb (136kg) for K4. Product weight 124g. Carbon tape and cap
screws included. Sold each. From WillowWood.
Item No. ð
700-200
d.
Laminated Socket Attachment Block
PROSTHETICS
Without rigid foam. Rated to 350 lb (160kg) for levels K1-K3 and 300 lb (136kg) for K4. Product weight 67g.
Carbon tape and cap screws included. Sold each. From WillowWood.
Item No. ð
700-250
ATTACHMENT PLATES
e.
4-Hole Spacer Plate
Aluminum. Rated to 300 lb (136kg). Sold each. From American Prosthetic Components.
Description
1/8” Round
.08” Square
Item No. ð
AL-418BAL-416B
PROSTHETICS
f.
619
4-Hole Laminating Plate
Aluminum. Rated to 300 lb (136kg). Sold each. From American Prosthetic Components.
Description
Item No.ò
Round, Weight 57g (pictured)
AL-420L
Round with 3/4-16 Center Thread, Weight 54g
AL-420L-TH
Square, Weight 43g
AL-430L
g.
Titanium 4-Hole Threaded Lamination Plate and Cap
Includes screws. Sold each. From American Prosthetic Components.
Item No. ð
TI-CPF-400
h.
4-Hole Aluminum Offset Plate
Available in four degrees of offset. Sold each. From American Prosthetic Components.
Description
9mm Offset
Item No. ðAL-409-OS
13mm Offset 19mm Offset
25mm Offset
AL-413-OSAL-419-OS AL-425-OS
i.
4-Hole Aluminum Angled Flexion Plate
Available in four degrees of flexion. Standard 4-hole pattern. From American Prosthetic Components.
Description
5° Angle
8° Angle
10° Angle
15° Angle
Item No. ð
AL-405-FLPL AL-408-FLPLAL-410-FLPL AL-415-FLPL
The Coupler™ Plate
The unique design of the Coupler™ Plate significantly decreases fabrication time. The Coupler™ Plate has
deep undercuts and knurls eliminating the need to vacuum form the plastic under the plate. The conical
pocket significantly improves the interface with the residual limb model. The Coupler™ Plate can be removed
and reused. Sold each. From Becker Orthopedic.
PROSTHETICS
j.
Item No. ð
P403000
k.
Integrator™ Socket Adapter
The Integrator™ Socket Adaptor, when used with one of Coyote Design’s connectors, can be built into alignment in one step with a clean inside socket finish. Ideal for AK or BK sockets. Weight limit: 265 lbs. Sold each.
From Coyote Design.
Description
Integrator™, 2-3/8” diameter
Item No.ò
CD108
Integrator™, 2” diameter
CD108S
CD108OR
O-Ring
620
PROSTHETICS
ATTACHMENT PLATES — Continued
a.
Attachment Plate for Thermoplastic
Used with a thermoplastic socket or thigh extension where the distal surface is left intact. 4-hole European
pattern. Sold each. From Fillauer.
Description
Item No.ò
Non-Threaded Center Hole, Weight 46g
125298
Threaded Center Hole, Weight 64g
125290
60329
Screw, M6 x 10 x 20 mm (4 required)
b.
4-Hole Spacer Plate
Two heights. Sold each. From Fillauer.
Description
1/4”
1/2”
Item No. ð
125810125812
c.
KISS® Superhero™
This reusable test socket plate allows for easy removal of casting tape without damaging the plate. Sold
each. From KISS®.
Item No. ð
CMP26/A
d.
KISS® 4-Hole Lamination Kit
PROSTHETICS
This reusable lamination kit allows for the easy lamination of the 4-Hole Endo Distal Base (CMP2/A). Kit
includes spacer screws. Sold each. From KISS®.
Item No. ð
CMP14/A
e.
Lamination Ring
Aluminum. Rated to 330 lbs (150kg). Minimum clearance 9mm. Product Weight 70g. Sold each. From Ottobock.
Item No. ð
5R2
PROSTHETICS
f.
621
Adapter Plate
Aluminum. Rated to 275 lbs (125kg). Minimum clearance 10mm. Sliding range 10-25mm. Product weight 75g.
Sold each. From Ottobock.
Item No. ð
4R118
g.
Adapter Plate
A thermoplastic or laminated socket adapter with a 4-hole European pattern design that fits most prosthetic
components. Includes a set of long and short screws. Aluminum. See page 536 for pediatric model. Sold each.
From ProAdvantage.
Description
Item No.ò
Standard
1320-ADAPT
1320-SCREWS
Plate Screws, M6 x 25mm
h.
Modified Plate
Round 4-Hole Euro and 6-Hole pattern. Aluminum. Sold each. From ProAdvantage.
Item No. ð
1320-MOD
i.
Spacer Plate
A round, lightweight aluminum 4-hole spacer plate designed for use between the socket and 4-hole pyramid
adapter. Sold each. From ProAdvantage.
Item No. ð
2035-SPACE
j.
AK Attachment Plate System
PROSTHETICS
Sold each. From RTC Corp.
Item No. ð
040-1000-90
622
PROSTHETICS
ATTACHMENT PLATES — Continued
a.
Threaded 4-Hole Laminating Ring
Heavy duty titanium. Rated to 350 lb (159kg). Product weight 34g. Sold each. From TiMed.
Item No. ð
A-620
b.
Seattle Mounting Plate
Provides a lightweight mounting fixture. May be used in laminated or thermoformed sockets. Outer diameter: 2.83” (72mm). Center hole diameter: 1” (25mm). Plate thickness .38” (9.6mm). Rated to 300 lb (136kg).
Product weight 49g. Sold each. From Trulife.
Item No. ð
SSA230
c.
Socket Retainer Dish
Designed as a secure interface between socket and modular components. Allows for adjustable alignment.
For lamination or thermoforming. Carbon construction. 3.74” diameter. Product weight 62g. Rated to 220
lb (100kg). Sold each. From Trulife.
Item No. ð
21203
d.
Socket Retainer Spacer Plate
PROSTHETICS
Aluminum plate for spacing. 4-hole pattern. 2-1/4” (57mm) square. Center hole diameter: 1-1/2” (38mm).
Plate thickness: 1/8” (3mm). Product weight 16g. Sold each. From Trulife.
Item No. ð
29316
e.
Thermoformed Socket Backup Hardware Kit
Vacuum forming attachment kit with universal 4-hole pattern for use with double walled socket construction. Sold kit. From Trulife.
Description
Round
Square
Item No. ð
9427D-TL9432D
PROSTHETICS
f.
623
4-Hole Adapter Spacer Plate
2” x 2” square. Rated to 250 lb (113kg). Sold each. From WillowWood.
Thickness
1/8”
3/8”
Item No. ð
700-300700-375
g.
4-Hole Angle Offset Plate
Aluminum. Provides 5° of angular offset in M-L or A-P orientation. Rated to 250 lb (113kg). 5° offset. Sold
each. From WillowWood.
Item No. ð
FND-135105
h.
4-Hole Aluminum Offset Plate
The aluminum 4-hole plate with 12mm offset can be installed in either an anterior/posterior or medial/lateral orientation. Screws included. The weight limit is 250 lbs (115 kg). Product weight: 54g. Sold each. From
WillowWood.
Item No. ð
FND-135106
i.
4-Hole Aluminum Reverse Angle Offset Plate
Provides 5 degrees of angular offset in medial/lateral or anterior/posterior orientation. Plate is offset and
angled in opposing directions. Screws included. The weight limit is 250 lbs (115 kg). Product weight: 54g.
Sold each. From WillowWood.
Item No. ð
FND-135107
PROSTHETICS
4-HOLE PYRAMID ADAPTERS
j.
4-Hole Pyramid Adapter
Sold each. From American Prosthetic Components.
Description
Item No.ò
Titanium, Rated to 300 lb (136kg), Weight 50g TI-400B
Stainless Steel, Rated to 300 lb (136kg), Weight 94g
SS-400B
624
PROSTHETICS
4-HOLE PYRAMID ADAPTERS — Continued
a.
Offset 4-Hole Pyramid Adapter
Titanium. Rated to 300 lb (136kg). Product weight 83g. Sold each. From American Prosthetic Components.
Description
Item No.ò
with Axial Offset
TI-400A
with Diagonal Offset
TI-400D
b.
Socket Attachment Plate with Pyramid
Red aluminum base with titanium pyramid. Rated to 300 lb (136kg). Sold each. From Fillauer.
Item No. ð
124180
c.
Stainless steel. Rated to 300 lb (136kg). Product weight 104g. Sold each. From Hosmer.
Item No. ð
60416
d.
Rotatable Pyramid Adapter
Titanium. Rated to 300 lb (136kg). Product weight 129g. Sold each. From Hosmer.
PROSTHETICS
Item No. ð
61100
60329
60290
e.
Socket Attachment Block Screw, M6 x 10 x 20mm
Back Plate Only
Socket Adapter, Male
Description
Item No.ò
Aluminum, Rated to 220 lb (100kg), Product Weight 55g
4R74
Stainless Steel, Rated to 275 lb (125kg), Product Weight 85g (pictured)
4R23
PROSTHETICS
f.
625
Socket Adapter, Male with Axial Offset
7mm axial offset. Sold each. From Ottobock.
Item No. ð
4R73=A-5.1
g.
Socket Adapter, Male with Diagonal Offset
5mm diagonal offset. Sold each. From Ottobock.
Item No. ð
4R73=D-5
h.
4-Hole Connector with Pyramid
Titanium. Rated to 350 lb (159kg). Product weight 73g. Sold each. From ST&G.
Item No. ð
1227T
i.
4-Hole Connector Diagonal Offset Pyramid
Titanium. 8mm diagonal offset. Rated to 300 lb (136kg). Product weight 71g. Sold each. From TiMed.
Item No. ð
A-292
PROSTHETICS
j.
4-Hole Connector Axial Offset Pyramid
Titanium. 6.5mm axial offset. Rated to 300 lb (136kg). Product weight 70g. Sold each. From TiMed.
Item No. ð
A-492
626
PROSTHETICS
4-HOLE PYRAMID ADAPTERS — Continued
a.
4-Hole Connector with Pyramid, Heavy Duty
Titanium. Rated to 350 lb (159kg). Product weight 63g. Sold each. From TiMed.
Item No. ð
A-692
b.
Single Offset Pyramid Adapter
For increased alignment adjustability. 7mm of offset laterally. Standard 4-hole pattern. Titanium. Rated to
300 lb (136kg). Product weight 57g. Sold each. From Trulife.
Item No. ð
15140
c.
Double Offset Pyramid Adapter
For increased alignment adjustability. 4.5mm offset anterior and 4.5mm offset laterally. Standard 4-hole
pattern. Titanium. Rated to 300 lb (136kg). Product weight 74g. Sold each. From Trulife.
Item No. ð
15141
d.
Sold each. From Trulife.
PROSTHETICS
Description
Item No.ò
Titanium, Rated to 300 lb (136kg), Weight 76g
SCA218
Titanium (Heavy Duty), Rated to 366 lb (166kg), Weight 80g
SCA218-HD
SCA260
4-HOLE PYRAMID ADAPTERS with HOLE
e.
4-Hole Pyramid Adapter with Center Hole
Description
Item No.ò
TI-425BH
Titanium (Heavy-Duty), Rated to 500 lb (227kg), Weight 130g
HD-425BH
SS-425BH
Aluminum (Heavy-Duty), Rated to 250 lb (113kg), Weight 79g (pictured)
ALH-425BH
PROSTHETICS
f.
627
Rotating 4-Hole Pyramid
Titanium. Rated to 300 lb (136kg). Product weight with screws 71g. Sold each. From American Prosthetic
Components.
Description
Item No.ò
with Center Hole (pictured)
TI-400RM
with Center Hole and Threaded Base
TI-406PAT
g.
Titanium with through hole. Rated to 300 lb (136kg). Product weight 50g. Sold each. From Hosmer.
Item No. ð
60254
h.
Socket Attachment Plate with Pyramid and Through Hole
Red aluminum base with titanium pyramid and through hole. Rated to 300 lb (136kg). Sold each. From Fillauer.
Item No. ð
124178
i.
Socket Adapter, Male with Hole
Titanium. Rated to 330 lb (150kg). Minimum clearance 7mm. Product weight 50g. Sold each. From Ottobock.
Item No. ð
4R54=5
Socket Adapter, Male, Rotatable with Hole
Titanium. Rated to 330 lb (150kg). Minimum clearance 11mm. Product weight 70g. Sold each. From Ottobock.
PROSTHETICS
j.
Item No. ð
4R77
628
PROSTHETICS
4-HOLE PYRAMID ADAPTERS with HOLE — Continued
a.
4-Hole Pyramid Adapter with Hole
Attaches to any socket or knee with a distal 4-hole pattern. 4 flat head screws are provided with every pyramid. Manufactured by a forged and machined combination, providing for a high quality, lightweight and
strong product. Product weight: 70g. Weight limit: 136kg. Sold each. From ST&G.
Description
Item No.ò
1217T
Aluminum, Rated to 250 lb (114kg), Weight 81g (pictured)
1217A
b.
4-Hole Connector with Pyramid with Hole
Sold each. From TiMed.
Description
Item No.ò
Titanium, Rated to 300 lb (136kg), Weight 45g (pictured)
A-192
Aluminum, Rated to 220 lb (100kg), Weight 63g
AL-192
c.
4-Hole Pyramid Adapter with Hole, Titanium
Designed for use with any locking system using a standard pin. Pyramid hole diameter: 10mm. Titanium.
Rated to 300 lb (136kg). Product weight 71g. Sold each. From Trulife.
Description
Item No.ò
Non-Threaded Hole
SCA210
Threaded Hole
SCA211
d.
4-Hole Pyramid Adapter with Hole, Stainless Steel
PROSTHETICS
Pyramid hole diameter: 8.4mm. Stainless steel. Rated to 250 lb (113kg). Sold each. From Trulife.
Description
Item No.ò
Non-Threaded Hole, Weight 119g
P15045
Threaded Hole, Weight 105g
P15004
e.
4-Hole Pyramid Adapter with Hole for BK Valve
Pyramid hole diameter: 8mm. Titanium. Rated to 300 lb (136kg). Product weight 73g. Sold each. From Trulife.
Item No. ð
SCA217
PROSTHETICS
f.
629
Rotatable Socket Pyramid
Infinitely rotatable with standard 4-hole pattern. Pyramid hole diameter: 10mm. Titanium. Rated to 300 lb
(136kg). Product weight 134g. From Trulife.
Item No. ð
SCA216
g.
Composite 4-Hole Pyramid Adapter
Strong and lightweight. Titanium pyramid has through hole. Rated to 250 lb (113kg). Product weight 68g.
Screws not included. Sold each. From WillowWood.
Item No. ð
FND-994100
h.
Magnum Titanium 4-Hole Adapter
Titanium with through hole. Weight limit is 350 lb (160kg) for levels K1 through K3, and 300 lb (136kg) for
K4. Product weight 56g. One year warranty. From WillowWood.
Item No. ð
MHD-PA-4
i.
Titanium. Rated to 250 lb (113kg). Product weight 56g. Sold each. From WillowWood.
Item No. ð
FND-227014
PROSTHETICS
j.
4-Hole Pyramid Adapter with Offset
Rated to 250 lb (113kg). Sold each. From WillowWood.
Description
Item No.ò
10mm Offset, Composite, Weight 71g
FND-994110
5mm Offset, Composite, Weight 70g (pictured)
FND-994105
630
PROSTHETICS
4-HOLE PYRAMID ADAPTERS with HOLE — Continued
a.
4-Hole Pyramid Adapter with Offset
Rated to 250 lb (113kg). Sold each. From WillowWood.
Description
Item No.ò
20mm Offset, Titanium, Weight 93g (pictured)
FND-224120
b.
Threaded Rotatable Pyramid Insert
Titanium with through hole. Rated to 250 lb (113kg). Product weight 57g. Sold each. From Willow Wood.
Item No. ð
FND-228003
c.
4-Hole Pyramid Slide Adapter
Provides up to 1/2” (13mm) medial/lateral or anterior/posterior slide capability. FND-134150 also provides
rotation. Aluminum. Rated to 250 lb (113kg). One year warranty. Sold each. From WillowWood.
Description
Item No.ò
Standard
FND-134125
with Rotation (pictured)
FND-134150
700-B098
SS FLat Head Cap Screw, M6 x 35mm (4)
d.
Magnum 4-Hole Pyramid Slide Adapter
PROSTHETICS
Ideal for providing either medial/lateral or anterior/posterior slide for heavy or very active patients. Created
with a 4-hole pattern, this Magnum Slide Adapter provides up to 1/2” (13 mm) of slide capability and can be
left in a definitive prosthesis. It is the perfect unit for providing medial/lateral slide with the Pathfinder™ II.
Pyramid is stainless steel. Rated to 350 lb (160 kg) for CMS Levels 1-3, and 300 lbs for CMS Level 4. One year
warranty. Sold each. From WillowWood.
Description
Item No.ò
Standard (pictured)
MHD-224125
with Rotation
MHD-224150
e.
Laminating Pyramid Adapter
Provides a one-step lamination into a transtibial socket. Includes pre-installed carbon tape. Sold each. From
WillowWood.
Description
Item No.ò
Composite, Rated to 250 lb (113kg), Weight 84g
FND-994000
Titanium, Rated to 350 lb (159kg)*, Weight 82g
MHD-PA-L
*MHD-PA-L weight limit is 350 lb (159kg) for levels K1 through K3 and 300 lb (136kg) for K4.
PROSTHETICS
631
4-HOLE PYRAMID RECEIVER ADAPTERS
f.
4-Hole Pyramid Receiver
Components.
Item No. ð
TI-450BF
g.
Rotating 4-Hole Pyramid Receiver
Components.
Description
Item No.ò
with Countersunk Base (pictured)
TI-455RF
with Threaded Base
TI-456PAT
h.
Threaded Rotating Clamping Base with Receiver Adapter
Titanium 4-hole threaded rotating clamping base with receiver adapter. Sold each. From American Prosthetic
Components.
Item No. ð
TI-465RF
i.
4-Hole Pyramid Receiver Adapter with Offset
Item No. ð
10A89/T
PROSTHETICS
7mm axially offset with 4 adjustment set screws. For connecting different modular parts or distal socket
ends. Only suitable for activity level normal, 2 and 3. Titanium. Product weight: 55g. Sold each. From Euro
International.
j.
Rotatable Adapter
Rated to 300 lb (136kg). Sold each. From Hosmer.
Description
Item No.ò
60293
60435
60329 Socket Attachment Block Screw, M6 x 10 x 20mm
60248 Alignment Adjustment Screw, M8 x 1.25 x 12mm
60290 Back Plate Only
632
PROSTHETICS
4-HOLE PYRAMID RECEIVER ADAPTERS — Continued
a.
Socket Adapter, Female
Description
Item No.ò
Aluminum, Rated to 220 lb (100kg), Product Weight 50g
4R95
Titanium, Rated to 330 lb (150kg), Product Weight 50g
4R55
Stainless Steel, Rated to 275 lb (125kg), Product Weight 85g
4R22
b.
Rotatable Socket Adapter, Female
Description
Item No.ò
Titanium, Rated to 330 lb (150kg), Min. Clearance 17mm, Product Weight 80g
4R51
Stainless Steel, Rated to 275 lb (125kg), Min. Clearance 18mm, Product Weight 140g
4R37
c.
Item No. ð
A-193
d.
4-Hole Rotating Base with Pyramid Receiver
PROSTHETICS
Item No. ð
A-526
e.
Female Socket Adapter
Standard 4-hole pattern. Allows for ±8° of adjustability. Rated to 300 lb (136kg). Sold each. From Trulife.
Description
Item No.ò
15103-TL
15003
PROSTHETICS
f.
633
Rotatable Socket Adapter
Infinitely rotatable with standard 4-hole pattern. Titanium. Rated to 300 lb (136kg). Product weight 142g.
Includes adjusting screws. Sold each. From Trulife.
Item No. ð
SCA214
g.
4-Hole Pyramid Receiver Rotatable Adapter
Enlarged eccentric holes allow for rotation. Rated to 300 lb (136kg). Sold each. From Trulife.
Description
Item No.ò
15105
15005-TL
h.
Rotatable Pyramid Receiver
Item No. ð
FND-228002
i.
Item No. ð
FND-227004
PROSTHETICS
THREADED 4-HOLE BASES and INSERTS
j.
4-Hole Center Threaded Base
Allows rotation. Titanium. Rated to 300 lb (136 kg). Product weight 43g. Sold each. From American Prosthetic
Components.
Item No. ð
TI-460B
634
PROSTHETICS
THREADED 4-HOLE BASES and INSERTS — Continued
a.
Threaded 4-Hole Connector
Allows rotation. Titanium. Rated to 300 lb (136 kg). Product weight 39g. Sold each. From TiMed.
Item No. ð
A-502
b.
4-Hole Rotatable Base
Compatible with Rotatable Pyramid Receivers SCA214-01 and SCA235-01, and Rotatable Pyramids SCA236-01
and SCA216-01. Titanium. Rated to 300 lb (136). Product weight 63g. Sold each. From Trulife.
Item No. ð
SCA212
c.
Pyramid with Rotation Thread
Titanium and stainless steel. Rated to 300 lb (136kg). Sold each. From American Prosthetic Components.
Description
Order No.ò
TI-01MS
SS-01MS
d.
Threaded Pyramid
PROSTHETICS
Item No. ð
60544
e.
Threaded Pyramid
Stainless steel. Rated to 300 lb (136kg). Product weight 90g. Sold each. From Ottobock.
Item No. ð
4R87
PROSTHETICS
f.
635
Rotating Pyramid with Hole
Item No. ð
1225T
g.
Rotatable Pyramid
Compatible with 4-Hole Rotatable Base SCA212 and 3-Prong Threaded Lamination Anchor SCA237. Rated to
300 lb (136kg). Sold each. From Trulife.
Description
Item No.ò
Titanium with Through Hole, Weight 47g
SCA216-01
Stainless Steel (No Through Hole), Weight 96g
SCA236-01
h.
Threaded Rotatable Pyramid Insert
Item No. ð
FND-268003
i.
Rotating Pyramid
Titanium. Rated to 300 lb (136 kg). Sold each. From TiMed.
Item No.ò
No Center Hole, Weight 49g
A-505
with Center Hole, Weight 39g
A-507
j.
PROSTHETICS
Description
Center Thread Rotating Receiver
Description
Item No.ò
TI-60FS
SS-60FS
636
PROSTHETICS
THREADED 4-HOLE BASES and INSERTS — Continued
a.
Rotating Pyramid Receiver
Item No. ð
1216T
b.
Threaded. Adjustable length. Titanium. Rated to 300 lb (136kg). Product weight 164g. Sold each. From TiMed.
Item No. ð
A-415
c.
Description
Item No.ò
A-506
SS-506
d.
Rotatable Pyramid Receiver
PROSTHETICS
Compatible with 4-Hole Rotatable Base SCA212 and 3-Prong Threaded Lamination Anchor SCA237. Rated to
Description
Item No.ò
SCA214-01
SCA235-01
e.
Threaded Rotatable Pyramid Receiver Insert
Item No. ð
FND-268004
PROSTHETICS
637
CUP CONNECTORS
f.
Cup Connector Kit
Titanium, pyramid interface for socket. Cup design allows for additional flexion, extension, adduction or abduction. Attaches to any standard size dome or pyramid receiver. Rated to 220 lb (136kg). Sold each. From Trulife.
Description
Item No.ò
Small, Weight 132g
P15107
Large, Weight 154g
P15108
T25000Alignment System Tooling, Thermoplastic
T25001
Alignment System Tooling, Lamination
g.
Cup Connector
Titanium, pyramid interface for socket. Cup design allows for additional flexion, extension, adduction or
abduction. Attaches to any standard pyramid. Available in rotatable and non-rotatable version. Rated to
Description
Item No.ò
Rotatable Cup Connector with Adjusting Screws, Weight 166g
P15122
Cup Connector with Adjusting Screws, Small, Weight 184g
P15115
P15116
Cup Connector with Adjusting Screws, Large, Weight 206g
T25000Alignment System Tooling, Thermoplastic
T25001
4-EAR LAMINATION ADAPTERS
h.
4-Ear Fixed Pyramid Adapter with Center Hole
Description
Item No.ò
TI-740L
SS-740L
PROSTHETICS
i.
Heavy Duty 4-Prong Laminating Adapter
Heavy duty titanium. Rated to 500 lb (227kg). Product weight 193g. Sold each. From American Prosthetic
Components.
Item No. ð
HD-740L
638
PROSTHETICS
4-EAR LAMINATION ADAPTERS — Continued
a.
4-Ear Rotatable Base with Pyramid
Titanium. Rated to 365 lb (166kg). Threaded inside. Product weight 142g. Sold each. From American Prosthetic
Components.
Item No. ð
TI-740RM
b.
4-Ear Rotatable Base with Pyramid Receiver
Titanium. Rated to 365 lb (166kg). Threaded inside. Product weight 133g. Sold each. From American Prosthetic
Components.
Item No. ð
TI-745RF
c.
4-Prong BK Adapter with Pyramid
Item No. ð
60324
d.
4-Prong BK Adapter with Through Hole
PROSTHETICS
Description
Item No.ò
61134-HS
60457
e.
4-Ear Lamination Anchor
Stainless steel. Sold each. From Ottobock.
Item No. ð
4R63=5.1
PROSTHETICS
f.
639
4-Ear Lamination Anchor with Hole
Item No. ð
4R63=5
g.
4-Ear Lamination Anchor with Hole
Titanium. Sold each. From Ottobock.
Item No. ð
4R100=5
h.
4-Ear Lamination Adapter
Provides an option for a one-step lamination into a transtibial socket. A lamination cover is included. Manufactured by a forged and machined combination providing for a high quality, lightweight and strong product.
Product weight: 55g. Weight limit: 136kg. Sold each. From ST&G.
Item No. ð
1220T
i.
4-Ear Lamination Adapter with Pyramid Hole
Description
Item No.ò
A-510
SS-510
AL-510
PROSTHETICS
j.
4-Ear Connector
Heavy duty titanium. Rated to 350 lb (159kg). Product weight 60g. Includes lamination dummy. Sold each.
From TiMed.
Item No. ð
A-610
640
PROSTHETICS
4-EAR LAMINATION ADAPTERS — Continued
a.
4-Ear Lamination Adapter with Hole
For transtibial or smaller transfemoral use. Pyramid hole diameter: 8mm. Stainless steel. Rated to 300 lb
(136kg). Product weight 105g. Lamination dummy included. Sold each. From Trulife.
Item No. ð
P15013
b.
4-Ear Lamination Pyramid
For transtibial or smaller transfemoral use. Best suited for lower activity and lower weight patients. Pyramid
hole diameter: 8.4mm. Aluminum. Rated to 176 lb (80kg). Product weight 64g. Lamination dummy included.
Item No. ð
17002-TL
c.
4-Ear Laminating Adapter with Hole
For transtibial or smaller transfemoral use. Outer diameter: 2-1/2”. Pyramid hole diameter: 8mm. Titanium.
Rated to 300 lb (136kg). Product weight 53g. Lamination dummy included. Sold each. From Trulife.
Item No. ð
SCA232
d.
4-Ear Lamination Adapter with Hole
PROSTHETICS
For transtibial or smaller transfemoral use. Outer diameter: 2-3/4”. Pyramid hole diameter: 8mm. Titanium.
Standard or heavy-duty. Lamination dummy included. Sold each. From Trulife.
Description
Item No.ò
SCA233
SCA233-HD
e.
4-Ear Lamination Pyramid
For transtibial or smaller transfemoral use. Stainless steel. Rated to 300 lb (136kg). Product weight 123g.
Lamination dummy included. Sold each. From Trulife.
Item No. ð
SCA262
PROSTHETICS
641
3-PRONG LAMINATION ADAPTERS
f.
3-Prong Rotatable Base with Pyramid
Stainless steel base with threaded titanium or stainless steel pyramid. Rated to 300 lb (136kg). Sold as set.
From American Prosthetic Components.
Description
Item No.ò
TI-700LM
SS-700LM
g.
3-Prong Rotatable Base with Pyramid Receiver
Stainless steel base with threaded titanium or stainless steel pyramid receiver. Rated to 300 lb (136kg). Sold
as set. From American Prosthetic Components.
Description
Item No.ò
TI-750LM
SS-750LM
h.
3-Prong Laminating Base
Stainless steel. Threaded on outside. Rated to 300 lb (136kg). Product weight 116g. Sold each. From American
Prosthetic Components.
Item No. ð
SS-300LM
i.
Rotatable Socket Adapter with Pyramid Receiver
PROSTHETICS
Item No. ð
60312
60314Rotatable Pyramid Receiver, Stainless Steel
61416
Socket Adapter Only, Threaded
j.
Rotatable Socket Adapter with Pyramid
Item No. ð
60576
642
PROSTHETICS
3-PRONG LAMINATION ADAPTERS — Continued
a.
Above Knee 3-Prong Socket Adapter
Stainless steel. Rated to 300 lb (136kg). Product weight 129g. Includes Laminating Cap. Sold each. From Hosmer.
Item No. ð
60325
60299Laminating Cap
b.
3-Prong Adapter with Pyramid
Item No. ð
4R42=5
c.
Rotatable 3-Prong Adapter with Pyramid
Stainless steel. Rated to 275 lb (125kg). Minimum clearance 15mm. Product weight 180g. Sold each. From
Ottobock.
Item No. ð
4R89
4X46
Lamination Dummy
d.
3-Prong Socket Adapter with Rotation
PROSTHETICS
Ottobock.
Item No. ð
4R41
4R87Threaded Pyramid Insert
4R44=N
Threaded Pyramid Receiver Insert
4X46
Lamination Dummy
e.
3-Prong Rotating Base
Stainless steel construction. Provides 360° of rotation for pyramid adapter or pyramid receiver adapter. Rated
to 150 lb (136kg). Product weight 116g. Sold each. From ST&G.
Item No. ð
1221S
PROSTHETICS
f.
643
3-Prong Rotating Adapter
Stainless steel. Rated to 300 lb (136kg). Product weight 113g. Sold each. From TiMed.
Item No. ð
SS-511
T-300Lamination Dummy
g.
Flexible 3 Ear Connector
Titanium. Rated to 300 lb (136kg). Product weight 616g. Sold each. From TiMed. Patent 7,722,679 B2
Item No. ð
A-511-3
T-300Lamination Dummy
h.
3-Prong Rotating Pyramid
Stainless steel base with threaded titanium pyramid. Rated to 300 lb (136kg). Product weight 161g. Sold
each. From TiMed.
Item No. ð
A-515
i.
3-Prong Rotating Pyramid Receiver
Stainless steel base with threaded titanium pyramid receiver. Rated to 300 lb (136kg). Product weight 158g.
PROSTHETICS
Item No. ð
A-516
j.
3-Prong Rotatable Lamination Pyramid with Hole
Stainless steel. Rated to 300 lb (136kg). Product weight 115g. Includes laminating dummy. Sold each. From
Trulife.
Item No. ð
P15019
644
PROSTHETICS
a.
3-Prong Rotatable Lamination Adapter, Female
Stainless steel. Rated to 300 lb (136kg). Product weight 197g. Sold each. From Trulife.
Item No. ð
SCA235
b.
3-Prong Rotatable Lamination Anchor
For residual limbs with larger circumference. Prongs may be contoured. Stainless steel. Threaded on inside.
Rated to 300 lb (136kg). Product weight 200g. Male Adapter Piece (SCA236-01) also available separately.
Item No. ð
SCA236
c.
3-Prong Threaded Lamination Anchor
Stainless steel. Rated to 300 lb (136kg). Product weight 107g. Sold each. From Trulife.
Item No. ð
SCA237
SCA235-01 Rotatable Pyramid Receiver Adapter Insert
SCA236-01 Rotatable Pyramid Adapter Insert
d.
3-Prong Lamination Anchor
PROSTHETICS
For residual limbs with larger circumference. For transfemoral or transtibial use. The prongs can be contoured.
Lamination dummy included. Sold each. From Trulife.
Item No. ð
SCA266
e.
3-Prong Rotatable Pyramid Receiver
Stainless steel. Rated to 250 lb (113kg). Product weight 191g. Sold each. From WillowWood.
Item No. ð
FND-268000
PROSTHETICS
f.
645
3-Prong Rotatable Pyramid Adapter
Stainless steel. Rated to 250 lb (113kg). Product weight 198g. Sold each. From WillowWood.
Item No. ð
FND-268001
g.
3-Prong Rotatable Base
Stainless steel. Threaded. Rated to 250 lb (113kg). Product weight 119g. Includes Lamination Plug. One year
warranty. Sold each. From WillowWood.
Item No. ð
FND-268002
FND-268005Lamination Plug
4-PRONG LAMINATION ADAPTERS
h.
Rotatable 4-Prong Adapter with Pyramid
Ottobock.
Item No. ð
4R116
4X46
Lamination Dummy
PROSTHETICS
i.
4-Prong Socket Adapter with Rotation
Ottobock.
Item No. ð
4R111=N
4R87Threaded Pyramid Insert
4R44=N
Threaded Pyramid Receiver Insert
4X46
Lamination Dummy
646
PROSTHETICS
a.
Rotatable 4-Prong Adapter with Pyramid Receiver
Ottobock.
Item No. ð
4R111
4X46
Lamination Dummy
b.
Rotatable 4-Prong Adapter, Female with Angled Arm
Item No. ð
4R119
DOUBLE END ADAPTERS
c.
Double Pyramid Adapter
Titanium. Rated to 300 lb (136kg). Product weight 122g. Sold each. From American Prosthetic Components.
Item No. ð
TI-115DM
PROSTHETICS
d.
Ottobock.
Item No. ð
4R76
e.
Stainless steel. Rated to 300 lb (136kg). Minimum clearance 6.5mm. Product weight 115g. Sold each. From
Ottobock.
Item No. ð
4R78
PROSTHETICS
f.
647
Double Ended Pyramid Adapter
Item No. ð
A-210
g.
Dual Adapter
Double ended. Titanium and stainless steel. Both rated to 300 lb (136kg). Sold each from American Prosthetic
Components.
Titanium
Height
Product Weight
Item No. ð
Stainless Product Weight
45mm
60mm
75mm
71g
99g
113g
128g
TI-132D TI-145DTI-160D TI-175D
116g
Item No. ð
32mm 147g
187g
223g
SS-132D SS-145DSS-160D SS-175D
h.
Dual Adapter
Double ended. Titanium, rated to 300 lb (136kg) and aluminum, rated to 220 lb (100kg). Sold each. From Hosmer.
Titanium
Aluminum Height
Product Weight
Item No. ð
Product Weight
Item No. ð
32mm 45mm
60mm
75mm
80g
91g
102g
118g
60306 6043960440 60441
68g
80g
93g
106g
61361 6136261363 61364
i.
Double Adapter, Female/Female
Titanium. Rated to 330 lb (150kg). Sold each. From Ottobock.
32mm
45mm
60mm
75mm
85G
95G
110G
125G
Item No. ð 4R72=32 4R72=454R72=60 4R72=75
PROSTHETICS
Height
Product Weight
j.
Double Ended Adapter
Titanium. Rated to 300 lb (136kg). 2 year warranty. Sold each. From ST&G.
Height
Product Weight
Item No. ð
32mm
45mm
60mm
75mm
88g
99g
113g
126g
1201T 1202T1203T 1204T
648
PROSTHETICS
DOUBLE END ADAPTERS — Continued
a.
Double Ended Adapter
Titanium, rated to 300 lb (136kg) and stainless steel, rated to 250 lb (113kg). Sold each. From TiMed.
Titanium
Stainless Height
Product Weight
Item No. ð
Product Weight
Item No. ð
32mm 45mm
60mm
75mm
80g
87g
112g
124g
A-401 A-402A-403 A-404
117g
144g
171g
198g
SS-401 SS-402SS-403 SS-404
b.
Variable Height Adapter
Titanium. Standard or heavy-duty. Sold each. From Trulife.
Standard
Height
32mm 45mm
60mm
72mm
101mm
Weight Limit
Product Weight
300 lb
76g
300 lb
93g
300 lb
106g
300 lb
130g
300 lb
143g
Item No. ð SCA221 SCA222 SCA223SCA224 16108
Heavy-Duty
Height
32mm 45mm
60mm
72mm
Weight Limit
Product Weight
366 lb
95g
366 lb
110g
366 lb
122g
366 lb
140g
Item No. ðSCA221-HD SCA222-HD SCA223-HDSCA224-HD
c.
Variable Height Adapter
Aluminum. Rated to 300 lb (136kg). Sold each. From Trulife.
Height
1-1/4”
(31.75mm)
1-3/4”
(44.45mm)
2-1/4”
(57.15mm)
7”
(178mm)
Product Weight
91g
113g
136g
184g
Item No. ð P15031 P15032P15033 P15008
PROSTHETICS
d.
Dual Pyramid Receiver
Double ended. Rated to 350 (160kg) for levels K1-K3 and 300 lb (136kg) for K4. Titanium. Sold each. From
WillowWood.
Height
32mm 45mm
60mm
75mm
Product Weight
82g
92g
107g
126g
Item No. ðFND-228032 FND-228045FND-228060 FND-228075
e.
Titanium Pyramid/Receiver Adapter
Titanium. Product weight 74g. Sold each. From American Prosthetic Components.
Item No. ð
TI-125P
PROSTHETICS
f.
649
Double Adapter, Male/Female
Titanium. Rated to 330 lb (150kg). Product weight 115g. Sold each. From Ottobock.
Item No. ð
4R84
g.
Double Ended Adapter with Pyramid
Titanium or stainless steel. Rated to 275 lb (125kg). One year warranty. Sold each. From ST&G.
Height
Titanium Product Weight
Item No. ð
Stainless Steel Product Weight
Item No. ð
32mm
45mm
60mm
75mm
56g
68g
76g
90g
1261T 1262T1263T 1264T
102g
112g
124g
162g
1261S 1262S1263S 1264S
SLIDE and ALIGNMENT COMPONENTS
h.
Rotating and Alignable Offset Dual Receiver Adapter
Allows offset alignment in all directions and 360° rotation. Product height 1-5/8”. Titanium. Rated to 300 lb
(136kg). 5 year warranty. Sold each. From American Prosthetic Components.
PROSTHETICS
Item No. ð
TI-675AR
i.
4-Hole Alignable Pyramid with Center Hole
By using the set screws in different configurations, pyramid may be offset axially, diagonally or a combination
of both. Titanium. Rated to 300 lb (136kg). 5 year warranty. Sold each. From American Prosthetic Components.
Item No. ð
TI-600AD
650
PROSTHETICS
SLIDE and ALIGNMENT COMPONENTS — Continued
a.
Alignment Sleeve System
The alignment sleeve system from American Prosthetic Components consists of 24 modular components to
use in combination with or without a pylon to create a prosthesis that allows for easily adjusted height and
rotation. Several components have an integrated dovetail for offset alignment. All are rated to 300 lb (136kg).
Components are precision CNC machined, CE marked, individually hand inspected and come with a 5 year
warranty. American made and competitively priced.
Pictured
Item No.ò
Aluminum Sleeve Dual Clamp, 40mm
AL-40-SLCL
Description
3
AL-60-SLCL
AL-80-SLCL
AL-100-SLCL
Aluminum Sleeve Spacer, 5mm
AL-5-SLSP
Aluminum Sleeve Spacer, 7.5mm
AL-7.5-SLSP
AL-10-SLSP
Aluminum Sleeve Spacer, 12.5mm 3
AL-12.5-SLSP
AL-15-SLSP
Titanium Pyramid w/Female Thread
TI-SL70-PF
Titanium Pyramid w/Male Thread
TI-SL70-PM
Titanium Pyramid Receiver w/Female Thread 3
TI-SL75-RF
Titanium Pyramid Receiver w/Male Thread
TI-SL75-RM
Titanium Pyramid w/Male Dovetail
TI-600-SLA-PM
Titanium Male Thread Adapter w/Female Dovetail
3
TI-610-SLA-TF
Titanium Tube Clamp Adapter w/Female Dovetail
Titanium Dual Female Dovetail
TI-615-SLA-CF
3
TI-620-SLA-FF
Titanium Pyramid Receiver w/Female Dovetail
TI-630-SLA-RF
Titanium Pyramid w/Female Dovetail
TI-640-SLA-PF
Titanium Pyramid Receiver w/Male Dovetail
3
TI-650-SLA-RM
Titanium Tube Clamp Adapter w/Male Dovetail
3
TI-655-SLA-CM
Titanium 4 Prong Laminating Base w/Male Thread
TI-740-B
Stainless Steel 3 Prong Laminating Base SS-300LM
PROSTHETICS
700LAM-TOOL
Reusable Lamination Thread Capping Tool
b.
Alignable Four Connector
Connector is used with Air-Lock and Integrator™. Can be offset from the bottom of the lock and fabricated
into the laminated socket. Used in definitive sockets when customer is needing to offset the alignment.
Pediatric versions available. From Coyote Design.
Item No. ð
CD103AF
CD103MDI
Insert, Multiple Direction Offset
CD103SDI Insert, Single Direction Offset
PROSTHETICS
c.
651
Alignment Coupler
Coupler is used for dynamic alignment during test socket fitting. Connects to standard four hole and can
offset the prosthetic alignment (foot) from the bottom of the socket. Up to 265 lbs. Not for use in definitive
sockets. From Coyote Design.
Item No. ð
CD106
d.
Endoskeletal Alignment Unit
Includes all parts listed below. Sold kit. From Fillauer.
Item No. ð
125321
124105Universal Coupling Ring with Top Plate
124140
A-P and M-L Slide Unit with Rotation and Pyramid
124170
Pylon Tube Clamp with Pyramid Receiver
125032
Pylon Tube, 30mm x 10”
125101
Lower Pylon Tube Clamp (Bolt and Flat Washer included)
e.
Universal Coupling Ring with Screws
Sold each. From Fillauer.
Item No. ð
124106
124106AAdapter Ring, Anodized
880288
Socket Cap Screw, M6 x 1 x 30mm Flat Head (4)
882612
Set Screw Con Point, M6 x 1 x 12mm (3)
f.
A-P/M-L Slide Unit with Rotation and Pyramid
882511
882416
882408
124110
g.
Flat Head Cap Screw, M5 x .8 x 10mm
Socket Head Set Screw, M4 x .7 x 12mm
Socket Head Cap Screw, M4 x .7 x 8mm
Center Plate
124155
124133
124150
Top Plate Assembly
Gib
Dome Plate Assembly
PROSTHETICS
Item No. ð
124140-FL
A-P/M-L Slide Unit with Pyramid and Socket Attachment Plate
Item No. ð
124141
880136
882416
882408
124110
Flat Head Undercut Screw, 10-32 x 5/16
Socket Head Set Screw, M4 x .7 x 12mm
Socket Head Cap Screw, M4 x .7 x 8mm
Center Plate
124164
124133
124150
Socket Attachment Plate
Gib
Dome Plate Assembly
652
PROSTHETICS
a.
Spectrum Pyramid Receiver with Female Dovetail
Rated to 220 lb (100kg). Product weight 67g. Sold each. From Hosmer.
Item No. ð
60950
60861
Pyramid Receiver
60248 Set Screw, M8 x 12mm
55501 Ball Bearing, 3/32” (2 required)
60598 Set Screw, M5 x 6mm with Nylock (3 required)
b.
Spectrum Pyramid Receiver with Male Dovetail
Item No. ð
60951
60938
Pyramid Receiver
60248 Set Screw, M8 x 12mm
60862 Short Screw
60610 Pan Head Screw, 6-32 x .25
c.
Spectrum 30mm Tube Clamp Adapter with Female Dovetail
Item No. ð
60954
60939
Tube Clamp Adapter, 30mm
56039 Socket Head Screw, M6 x 25mm
55501 Ball Bearing, 3/32” (2 required)
60598 Set Screw, M5 x 6mm with Nylock
d.
Spectrum 4-Hole Plate with Male Dovetail
PROSTHETICS
Item No. ð
60956
60860
4-Hole Plate
60862 Side Shift Screw
60329 Flat Head Screw, M6 x 20mm (4 required)
60610 Pan Head Screw, 6-32 x .25
e.
Spectrum 4-Hole Plate to Pyramid Receiver with Alignment Adapter
Rated to 220 lb (100kg). Height 1-3/32”. Sold each. From Hosmer.
Item No. ð
60958
60956
4-Hole Plate with Male Dovetail Sub-Assembly
60955 Male/Female Dovetail Adapter
60950 Pyramid Receiver with Female Dovetail
60329 Flat Head Screw, M6 x 20mm (4 required)
PROSTHETICS
f.
653
Spectrum Pyramid Receiver to Pyramid Receiver
Rated to 220 lb (100kg). Height 2”. Sold each. From Hosmer.
Item No. ð
60961
60950
Pyramid Receiver with Female Dovetail
60951 Pyramid Receiver with Male Dovetail
g.
Spectrum Pyramid Receiver to Pyramid with Alignment Adapter
Item No. ð
60962
60952
Pyramid with Female Dovetail
60955 Male to Female Dovetail Adapter Sub-Assembly
h.
Spectrum Pyramid Receiver to Pyramid
Item No. ð
60963
60952
Pyramid with Female Dovetail
i.
Spectrum Pyramid Receiver to 30mm Tube Clamp with Alignment Adapter
60954
30mm Tube Clamp with Female Dovetail
60955 Male to Female Dovetail Adapter
j.
PROSTHETICS
Item No. ð
60965
Spectrum Pyramid Receiver to 30mm Tube Clamp
Item No. ð
60966
60954
30mm Tube Clamp with Female Dovetail
654
PROSTHETICS
a.
Transfemoral Rotator
Allows cross-legged sitting. Facilitates entering and exiting cars. Smooth, one-handed, push button operation.
Robust spring loaded lock. Automatic relock. Low profile and lightweight. Sold each. From Hosmer.
Item No. ð
62588
b.
Slide Double Adapter
Titanium. Rated to 220 lb (100kg). Slide range +/- 11mm. Sold each. From Ottobock.
Height
60mm
75mm
Product Weight
215g
225g
Item No. ð
4R104=604R104=75
c.
Slide Adapter
The 4R101 is mounted between the socket attachment block and the socket adapter or functional adapter.
It allows independent shifts in the frontal and sagittal planes and a convenient scale makes it easy to track
adjustments. Aluminum. Rated to 220 lb (100kg). Slide range +/- 11mm. Sold each. Product weight 205g.
From Ottobock.
Item No. ð4R101
PROSTHETICS
d.
Alignment Adapter Set
The Alignment Adapter Set serves to optimize alignment of modular lower limb prostheses in temporary
initial and/or interim fittings. It includes two assembly plates, one adapter with pyramid and one adapter
with pyramid receiver. Adjustments may be made both in the frontal and the sagittal plane, as well as in the
rotational direction. Aluminum/titanium. Rated to 220 lb (100kg). Sold set. From Ottobock.
Specifications
Sliding range in A-P direction
with assembly plate 1: 48mm in 12mm increments
Sliding range in M-L direction
Rotational Adjustment: +/- 18° in 3° increments
Product Weight: 195g-510g
Item No. ð4R112
PROSTHETICS
655
ADJUSTABLE HEIGHT ADAPTERS
Adjustable Pylon
e.
Features precise height and rotation adjustments without removing the socket or foot. The adjustable pylon
significantly reduces patient appointment time, saving an average of 15-20 minutes per visit! The adjustable
pylon also makes off-site visits more efficient and therapist-friendly. Rated to 220 lb (100kg). Sold each. From
Kinetic Revolutions.
Specifications
PCP-0100-PSD (Tall)
PCP-0104-PSD (Short)
Extension Range
3.75-5” (95-130mm)
2.88-3.75” (73-95mm)
32mm
35mm
Outside Diameter
Description
Item No.ò
Tall
PCP-0100-PSD
Short
PCP-0104-PSD
Tall
Short
TUBE CLAMP ADAPTERS
f.
30mm Tube Clamp Adapter
5 year warranty. Sold each. From American Prosthetic Components. See page 539 for pediatric size.
Description
Item No.ò
TI-100C
HD-100C
SS-100C
g.
Tube Clamp with Pyramid Receiver
Titanium and aluminum. 30mm tube. Rated to 300 lb (136kg). Sold each. From Fillauer.
Item No.ò
Aluminum (red)
124170-FL
Titanium
60247
Stainless Steel
60400
PROSTHETICS
Description
h.
30mm Adapter
Set screws included. One year warranty. Sold each. From WillowWood.
Description
Item No.ò
FND-220030
Magnum (Heavy-Duty Titanium), Rated to 350 lb*, Weight 110g
MHD-002
FND-130030
*Weight limit for the Magnum Adapter is 350 lb for levels K1-K3 and 300 lb for level K4.
656
PROSTHETICS
TUBE CLAMP ADAPTERS — Continued
a.
Tube Clamp Adapter
30mm. Sold each. From Ottobock.
Description
Item No.ò
Aluminum
4R69=5
Titanium
4R52=5
Stainless Steel
4R21=5
b.
Tube Clamp Adapter
Description
Item No.ò
Titanium
4R82
Stainless Steel
4R91
c.
Tube Clamp
Standard 30mm. 2 year warranty. Sold each. From ST&G.
Description
Item No.ò
Aluminum, Rated to 250 lb (114kg), Product weight 83g
1212A
Stainless Steel, Rated to 275 lb (125kg), Product weight 128g
1212S
Titanium, Rated to 300 lb (136kg), Product weight 79g
1212T
Heavy Duty Titanium , Rated to 375 lb (170kg), Product weight 128g
3212T
d.
Tube Clamp
PROSTHETICS
Standard 30mm. Sold each. From TiMed.
Description
Item No.ò
Titanium, Rated to 300 lb (136kg), Weight 79g (pictured)
A-503
A-613
SS-503
AL-503
e.
34mm Tube Clamp Adapter
Extra heavy duty. Rated to 500 lb (227kg). Product weight 181g. Sold each. From TiMed.
Item No. ð
EH-503-XHD
PROSTHETICS
f.
657
Adjustable Clamp Adapter
Standard 30mm. Sold each. From Trulife.
Description
Item No.ò
SCA225
SCA225-HD
SCA270
17001-TL
SCA-SETClamp Adapter Screws (set of 4)
g.
Tube Clamp with Pyramid
Standard 30mm. Titanium. Rated to 300 lb (136kg). Product weight 85g. 5 year warranty. Sold each. From
American Prosthetic Components.
Item No. ð
TI-120P
h.
Tube Clamp Adapter with Pyramid
Standard 30mm. Titanium. Rated to 300 lb (136kg). Product weight 61g. Sold each. From TiMed.
Item No. ð
A-504
i.
Adjustable Clamp Adapter with Pyramid
Standard 30mm. Titanium. Rated to 300 lb (136kg). Product weight 61g. Sold each. From Trulife.
PROSTHETICS
Item No. ð
SCA226
j .
Tube Clamp Adapter with Offset Receiver
Titanium. 5mm offset. Rated to 300 lb (136kg). Product weight 105g. Sold each. From American
Prosthetic Components.
Item No. ð
TI-105C
658
PROSTHETICS
TUBE CLAMP ADAPTERS — Continued
a.
Angled Tube Clamp Adapter
Description
Item No.ò
10° Angle
4R56
20° Angle
4R56=1
b.
Offset Tube Clamp
Item No. ð
1222T
c.
10 Degree Angled Tube Clamp
Often used to aid in alignment associated with hip disarticulation. Titanium. Rated to 220 lb (100kg). Product
weight 86g. 2 year warranty. Sold each. From ST&G.
Item No. ð
1213T
d.
Offset Tube Clamp
Standard 30mm. 5mm offset. Sold each. From TiMed.
PROSTHETICS
Description
Item No.ò
A-805
SS-805
e.
Angled Adjustable Clamp Adapter
Increases flexion or extension adjustments. 10° angle. Rated to 300 lb (136kg). Sold each. From Trulife.
Description
Item No.ò
15124
15024
PROSTHETICS
f.
659
Tube Clamp Adapter with Slide
Description
Item No.ò
Aluminum
4R98
Titanium
4R103
Stainless Steel
4R88
g.
Sliding Tube Clamp
Offers sliding adjustment. Titanium. Rated to 220 lb (100kg). Product weight 185g. 2 year warranty. Sold
each. From ST&G.
Item No. ð
1219T
TUBE ADAPTERS
h.
Connection Adapter, Male
Description
4R84=D
Stainless Steel, Product weight 145g
4R84=D-62
PROSTHETICS
Titanium, Product weight 65g
Item No.ò
i.
Connection Adapter, Female
Description
Titanium, Product weight 70g
Item No.ò
4R72=D
Stainless Steel, Product weight 150g
4R72=D-62
660
PROSTHETICS
TUBE ADAPTERS — Continued
a.
Tube Adapter
Description
Item No.ò
30mm2R45=S
34mm
2R45=34
b.
Adjustable Pylon
Titanium. Rated to 300 lb (136kg). Product weight 99g. 5 year warranty. Sold each. From American Prosthetic
Components.
Item No. ð
TI-110AT
c.
Short Tube Adapter
Description
Item No.ò
Titanium, Rated to 300 lb (136kg), 100mm Length, Weight 110g
60558
Aluminum, Rated to 220 lb (100kg), 200mm Length
61352
PROSTHETICS
d.
Tube with Pyramid Receiver
Provides optimum strength and options for low clearance requirements. Titanium. 100mm height. Rated to
300 lb (136kg). Product weight 128g. 2 year warranty. Sold each. From ST&G.
Item No. ð
1205T
e.
30mm Tube with Pyramid Receiver
Item No. ð
A-405
PROSTHETICS
f.
661
Threaded. Adjustable length. Titanium. Rated to 300 lb (136kg). Product weight 164g. Sold each. From TiMed.
Item No. ð
A-415
TUBE ASSEMBLIES and PYLONS
g.
Pylon with Fixed Receiver Adapter
Description
10”
17”
Titanium Receiver
TI-10TCTI-17TC
Titanium Internal Receiver
TI-10TCITI-17TCI
Stainless Steel Receiver
SS-10TCSS-17TC
h.
30mm Pylon with Adapter
Rated to 300 lb (136kg). Sold each. From Hosmer
Description
Item No.ò
Titanium, 300mm Length, Weight 258g
60246
Titanium, 400mm Length, Weight 321g
60245
Stainless Steel, 300mm Length, Weight 286g
60430
Stainless Steel, 400mm Length, Weight 350g
60429
60248Alignment Adjustment Screw, M8 x 1.25 x 12mm
30mm Tube Adapter
Description
Item No.ò
Titanium2R38=5
PROSTHETICS
i.
Stainless Steel2R3
Aluminum2R49
j.
34mm Tube Adapter
Description
Long
Short
Titanium
2R582R57
Stainless Steel
2R772R76
662
PROSTHETICS
TUBE ASSEMBLIES and PYLONS — Continued
a.
Angled Tube Adapter
Titanium. 30mm. Adapter angled 10°. Sold each. From Ottobock.
Item No. ð
2R38=10
b.
Fixed Adapter and 30mm Aluminum Tube
Permanent adapter at one end of 400mm aluminum tube. Includes insert. Insert is required at non-modified
end when using 30mm tube to provide extra security and strength. From WillowWood.
Description
Item No.ò
Titanium, Rated to 250 lb*, Weight 313g
FND-221330
Aluminum, Rated to 250 lb*, Weight 298g
FND-131330
FND-00003030mm Tube Insert, 13g
*Weight limit is 250 lb for levels K1-K2. The weight limit is 220 lb for levels K3-K4 (Titanium) and level K3 only (Aluminum). The aluminum adapter assembly is not recommended for level K4.
c.
Tube Clamp Assembly
30mm. Sold each. From ST&G.
Description
Item No.ò
Titanium1211T
Aluminum
1211A
d.
Tube Assembly with Bonded Adapter
PROSTHETICS
400mm length. Sold each. From TiMed.
Description
Item No.ò
Aluminum Pylon w/Titanium Pyramid Receiver, Rated to 250 lb (113kg), Wt 270g (Gold)
DISCON
Aluminum Pylon w/Low Profile Ti Pyramid Receiver, Rated to 250 lb (113kg), 291g (Silver)
A-712
Aluminum Pylon w/HD Titanium Pyramid Receiver, Rated to 300 lb (136kg), 279g (Blue)
A-612
Aluminum Pylon w/SS Pyramid Receiver, Rated to 250 lb (113kg), Wt 331g (Gold Tube)*
SS-512
Aluminum Pylon w/Aluminum Pyramid Receiver, Rated to 220 lb (100kg), 310g (1-Piece)
AL-512
e.
Aluminum Tube with Bonded Adapter
Description
Item No.ò
Titanium, Rated to 225 lb (102kg), 10” (254mm) Length, Weight 191g
P15111-TL
Titanium, Rated to 225 lb (102kg), 17” (432mm) Length, Weight 282g
P15118
Titanium (Heavy Duty), Rated to 366 lb (166kg), 10” (254mm) Length, Weight 273g
P16211
Stainless Steel, Rated to 225 lb (102kg), 10” (254mm) Length, Weight 228g
P15011
Aluminum, Rated to 176 lb (80kg), 17” (432mm) Length, Weight 280g*
P17018
PROSTHETICS
f.
663
Aluminum Pylon Assembly
Several models. Rated to 225 lb (102kg). Sold each. From Trulife.
Description
Item No.ò
w/Bonded Titanium Female Adapter, Weight 280g
SPA200-B
w/Bonded Titanium Pyramid Adapter, Weight 272g
SPA200-M
w/Bonded Stainless Steel Female Adapter, Weight 318g
SPA200-S
No Adapter, Weight 219g
SPA200-P
SHOCK PYLONS
g.
DuraShock Shock / Torsion Reducing Pylon
Simulates the rotation and shock absorption of the natural limb during stance phase. 60° of axial rotation
(30° in each direction). Maintenance-free design. Requires less than 5” in clearance. Short model measures
7.5”. Long version measures 11.25”. Sold each. From Fillauer.
Activity Level K2 (Short/Long)
<144 lb
145-179 lb
180-220 lb 220-250 lb
Activity Level K3 (Short)
<139 lb
140-169 lb
170-200 lb
200-250 lb
Activity Level K3 (Long)
<144 lb
145-169 lb
170-220 lb
220-250 lb
Tube Diameter
30mm30mm30mm34mm
Description
Black
Blue
Red
Heavy-Duty
Short (Minimum Length 4.75”)
DS003SDS002SDS001SDS004S
Long (Minimum Length 5.75”)
DS003LDS002LDS001LDS004L
h.
DuraShock Shorty
Three stiffness options matched to patient weight and activity. The Dynamic Elastomers create smooth motion. Up to 60° of axial rotation. Shock absorption for increased socket comfort. Reduces rotational force to
residual limb. Clearance as low as 3.5” (89mm). Maintenance-free design requires no bumper changes. Sold
each. From Fillauer.
Patient Weight
200 lb
179 lbs
144 lb
Description
Black
Blue
Red
PROSTHETICS
Item No. ð
DS001SSDS002SS DS003SS
ALUMINUM TUBE
i.
Aluminum Tube
Seamless aluminum tube. Rated to 300 lb (136kg). 5 year warranty. Sold each. From American Prosthetic
Components.
Description
Item No.ò
10” Length, 30mm, Rated to 300 lb (136kg)
AL-10T
17” Length, 30mm, Rated to 300 lb (136kg)
AL-17T
11.75” Length, 34mm, Rated to 500 lb (227kg)
HD-AL-PYLON
664
PROSTHETICS
ALUMINUM TUBE — Continued
a.
Pylon Tube
Aluminum. 30mm. Rated to 300 lb (136kg). Sold each. From Fillauer.
Description
10” Length
Item No. ð
125032
17” Length
36” Length
125034
238024
b.
Pylon Tube
Aluminum. Rated to 300 lb (136kg). 30mm x 36” length. Blue. Sold each. From Hosmer.
Item No. ð
60550
c.
Aluminum Tube
Aluminum. Sold each. From TiMed.
Description
Item No.ò
30mm x 380mm, Rated to 300 lb (136kg), Weight 236g, (Blue)
A-100
30mm x 36”, Rated to 250 lb (113kg), Weight 526g, (Silver)
A-300
d.
Aluminum Tube
Aluminum. Black anodized finish. Rated to 220 lb (100kg). 30mm x 36” length. Sold each. From Trulife.
Item No. ð
P15036
PROSTHETICS
CARBON TUBE
e.
30mm Composite Tube
Rated to 350 lb (159kg)*. 400mm length. Product weight 251g. Inserts (included) are required at each end to
provide extra security and strength. Sold each. From WillowWood.
Item No. ð
MHD-30CT
MHD-30CTITube Insert, 7g
700-TL003
Magnum Tube Cutting Guide
*Weight limit is 350 lb (159kg) for levels K1-K3 and 300 lb (136kg) for level K4.
PROSTHETICS
f.
665
Heavy-Duty Carbon Tube
Rated to 375 b (170kg). 30mm diameter. 305mm length. 2 year warranty. Sold each. From ST&G.
Item No. ð
1209C
g.
Carbon Fiber Tube
Standard and heavy-duty. 11.75” length. Sold each. From TiMed.
Description
Item No.ò
30mm, Rated to 350 lb (159kg), Weight 148g
A-200
34mm, Rated to 500 lb (227kg), Weight 236g
A-500XHD
AK MODULAR COMPONENT SETS
h.
AK-500 System
The new AK-500 System from TiMed is the only AK system on the market rated to 500 lb. It features high
quality titanium components, patented 4-bar polycentric knee with lock, extra high strength carbon tube and
SACH foot (available in sizes 25-33cm). This system has been tested and certified by Berlin Cert, institute for
testing and certification of medical devices associated with the Technical University Berlin. Complete system
includes components listed separately. From TiMed.
Cosmesis Selection Guide
Light
Caucasian
Light Negroid
Dark
Latin
Negroid
PROSTHETICS
Color
Caucasian
Leave Blank
CL 4A7A L
Color Code
Description
Item No.ò
Complete System
AK-500 - (Foot Size) (Side) - (Color Code)
EH-653
4-Prong Lamination Clamp, 110g
A-500XHD
35mm Carbon Tube, 195g
EH-701Shuttle Lock, 255gEH-503Tube Clamp, 161g
EH-693Knee Adapter, 181gEH-605Adapter, 100g
KN-500
Polycentric Knee w/Lock, 1,120g
EH-500
SACH Foot
666
PROSTHETICS
BK MODULAR COMPONENT SETS
a.
APCI Modular Components Sets
Save using convenient set options from American Prosthetic Components.
Stainless Steel Sets
Set Components:
SS-10TC
SS-100C
Item No.ò
SS 10” Basic Set
3
3
SS-10SET-B
Titanium Sets
Set Components:
TI-10TC
TI-17TC
TI-100C
TI-400B
TI-400L TI-425BH TI-500P Item No.ò
10” Basic
33
TI-10SET-B
10” Basic +
33
3
TI-10SET-B2
10” Basic + w/hole
333
TI-10SET-B2WH
10” 4-Prong Lam 333
TI-10SET-B4L
TI-17SET
17” Modular Set
3
3
17” Basic
3
3
TI-17SET-B
17” Basic +
3
3
TI-17SET-B2
3
17” Basic + w/hole
3
3
33
3
TI-17SET-B2WH
b.
Basic BK Kit
Sold kit. From Hosmer.
Description
Item No.ò
Titanium Kit (Includes titanium parts listed below)
60577
Stainless Kit (Includes stainless parts listed below)
60578
PROSTHETICS
60247
Tube Clamp, Titanium
60400 Tube Clamp, Stainless
60246 Pylon with Titanium Adapter, 300mm
60430 Pylon with Stainless Steel Adapter, 300mm
60260Connector
60273 SACH Foot Adapter, Titanium with Steel Bolt
60405 SACH Foot Adapter, Stainless with Steel Bolt
c.
BK Socket Block Kit
Includes all parts listed beneath kit. Sold kit. From Hosmer.
Description
Item No.ò
Titanium Kit
60581
Stainless Kit
60579
Titanium Kit Parts:Stainless Steel Kit Parts:
60267
Socket Block60267Socket Block
60254 4-Hole Pyramid, titanium
60416
4-Hole Pyramid, stainless steel
60247 Tube Clamp, titanium
60400
Tube Clamp, stainless steel
60260
Connector60260Connector
60273 SACH Foot Adapter, titanium
60405
SACH Foot Adapter, stainless steel
PROSTHETICS
d.
667
BOA® G-2 Kit with Adapter
G-2 Adjustment Section with Adapter for Lamination. 20mm horizontal slide and 24° angle adjustment.
Includes 30mm x 300mm aluminum tube. Rated to 275 lb (125kg). Product weight 249g. From Fillauer.
Item No. ð
731000161
e.
BK-201 Kit
Kit includes components listed separately below. Sold kit. From TiMed.
Item No. ð
BK-201
A-503TTitanium Tube Clamp, 83g
A-512
30mm Aluminum Pylon with Titanium Receiver, 295g
f.
BK-500 Kit
Kit includes components listed separately below. Sold kit. From TiMed.
Item No. ð
BK-500
EH-610 XHD4-Ear Connector, 156g
A-500 XHD
34mm Carbon Tube, 236g
34mm Tube Clamp, 181g (2)
EH-503 XHD
ANKLES
Earthwalk™ 2 Ankle
The Earthwalk 2 Ankle is an innovative multiaxial ankle, geared toward amputees (U.S. Activity Levels 1 and
2) who are looking for more stability and less dynamic response. The “late stop” feature allows for easy roll
over so the foot can maintain foot flat longer. With the Earthwalk 2 Ankle, amputees enjoy the freedom
of movement through inversion and eversion, internal and external rotation, and plantar and dorsiflexion.
Rated to 250 lb (115kg). Product weight 185g. Product height 41.25mm. From WillowWood.
Toe Stiffness
Very Low
Low
Regular
High
Patient Weight
< 150 lb
(<70kg)
151-175 lb
(71-80kg)
176-220 lb
(81-100kg)
221-250 lb
(101-115kg)
Color Code
Red
Blue
Yellow
Green
PROSTHETICS
g.
Item No. ð EWA2-R EWA2-BEWA2-Y EWA2-G
668
PROSTHETICS
ANKLES — Continued
a.
Impulse™ Ankle
Designed for amputees with activity levels K1 to K3. Features inversion/eversion, axial rotation and sleek
profile that facilitates adjustments and cosmetic finishing. Integrated titanium pyramid. Maintenance-free
design. Product weight 185g. Sold each. From WillowWood.
Base Material
AluminumAluminumAluminumAluminum Titanium Titanium
Patient Weight
< 150 lb
(<68kg)
151-190 lb
(69-86kg)
191-230 lb
(887-104kg)
231-270 lb
(105-122kg)
271-310 lb
(123-140kg)
311-350 lb
(141-160kg)
Red
Blue
Yellow
Green
Black
White
Color Code
Item No. ð
IMPA-R IMPA-B IMPA-Y IMPA-GIMPA-K IMPA-W
b.
Multi-Axis Ankle
Suitable for use with any single bolt prosthetic foot. Provides multi-axis ankle motion throughout stance. Adjustable plantar flexion, dorsiflexion and range of motion. Rated to 220 lb (100kg). Includes set of durathane
bumpers. Product weight (including bumpers) 223g. Sold as set. From Trulife.
Item No. ð
P31800
FOOT ADAPTERS
c.
Foot Pyramid
PROSTHETICS
Foot bolt included. 5 year warranty. Sold each. From American Prosthetic Components.
Description
Item No.ò
TI-500P
HD-500P
SS-500P
ALH-500P
Aluminum (Heavy-Duty), Rated to 250 lb (113kg), Weight 125g
500P-PLFoot Plate Plastic Cap
d.
SACH Foot Adapter
Rated to 300 lb (136kg). Bolt is made of slightly heavier, superior grade alloy steel. From Hosmer.
Description
Item No.ò
60273
60405-HS
60260
Foam Connector, 17g
PROSTHETICS
e.
669
Foot Attachment Plate with Pyramid
Rated to 220 lb (100kg). Red aluminum with titanium pyramid. Sold each. From Fillauer.
Item No. ð
124160-FL
f.
Foot Pyramid
Item No. ð
2LTC-1208
g.
SACH Foot Adapter
Item No. ð
2R31=M10-5
h.
SACH Foot Adapter
Sold each. From ST&G.
Description
Item No.ò
1231T
1231S
PROSTHETICS
Titanium, Rated to 300 lb (136kg), Product Weight 136g
Stainless Steel, Rated to 275 lb (125kg), Product Weight 112g
Aluminum Rated to 250 lb (114kg), Product Weight 105g
1231A
1231-1
Bolt for SACH Foot Adapter
i.
Heavy Duty SACH Foot Adapter
Designed with a shorter flange to provide better strength with reduced weight. Rated to 375 lb (170kg). Two
year warranty. Includes foot bolt. From ST&G.
Item No. ð
3231T
670
PROSTHETICS
FOOT ADAPTERS — Continued
a.
SACH Foot Adapter
Bolt included. Sold each. From TiMed.
Description
Item No.ò
Titanium, Rated to 250 lb (114kg), Weight 90g with Bolt
A-509
Titanium (Heavy-Duty), Rated to 350 lb (159kg), Weight 95g with Bolt
A-509HD
Stainless Steel, Rated to 250 lb (113kg), Weight 113g with Bolt
SS-509
Aluminum, Rated to 220 lb (100kg), Weight 108g with Bolt
AL-509
b.
SACH Foot Adapter without Flange
Titanium. Rated to 300 lb (136kg). Product weight 86g with bolt. Sold each. From TiMed.
Item No. ð
A-609
c.
SACH Foot Pyramid — Titanium
Titanium. Front to back length 2” (51mm). Includes foot bolt. Sold each. From Trulife.
Description
Item No.ò
SCA240
SCA240-HD
d.
SACH Foot Adapter
PROSTHETICS
For use with SACH feet with carbon or Delrin® keels. Titanium. Rated to 300 lb (136kg). Product weight 46g.
Item No. ð
SCA242
SFB540Foot Bolt (sold separately)
e.
SACH Foot Adapter
For use with SACH feet with wooden keels. Includes foot bolt (SFB540). Sold each. From Trulife.
Description
Item No.ò
Titanium, Rated to 300 lb (136kg), Front-to-Back Length 2-3/8” (61mm), Weight 46g
15100
Titanium (Heavy-Duty), Rated to 366 lb (166kg), Front-to-Back Length 2-5/8”, Weight 56g
16100
PROSTHETICS
f.
671
SACH Foot Pyramid — Stainless Steel
Stainless Steel. Rated to 300 lb (136kg). Front-to-back length 2-5/8” (67mm). Product weight 84g. Includes
anti-rotation pins (12419-001). Sold each. From Trulife.
Item No. ð
SCA280
SFB540
Foot Bolt (sold separately)
g.
SACH Foot Pyramid — Aluminum
Aluminum. Rated to 176 lb (80kg). Front-to-back length 2-3/4” (69mm). Product weight 56g. Includes foot
bolt. Sold each. From Trulife.
Item No. ð
P17000
h.
Female Foot Adapter
Titanium. Set screws are at the top and angled upward for easy foot alignment. Includes foot bolt. Sold
each. From Trulife.
Description
Item No.ò
Titanium, Rated to 300 lb (136 (kg), Weight 120g
SCA241
SCA241-HD
i.
Model F5 — Aluminum Coupler with Pyramid Reciever
PROSTHETICS
The F5 Coupler with integrated pyramid receiver allows patients with a quick changing self-aligning device
to quickly change prosthetic feet or knee-shin systems (i.e. changing from walking foot to a running foot).
Adjustments are possible to the distal portion of the coupler without the expense of additional components.
The F5 is constructed of high strength aircraft grade aluminum alloy to provide a strong, yet lightweight
component and is hard coated for even greater durability. 1.75” H x 2.5” W. Product weight 7.3 oz. Kit includes
replacement parts listed separately. From Ferrier Coupler Inc.
Item No. ð
F5
A200
Pyramid Receiver
T802 Male Component with Pyramid Receiver
D300 Delrin Pin
KEY Key for Pin
j.
Foot Spacer
Provides versatility during setup and fabrication. Designed of lightweight nylon. For temporary or permanent
use. Rated to 300 lb (136kg). Sold each. From Trulife.
Size
0.25”
0.5”
1”
1.5”
Product Weight
14g
28g
57g
111g
Item No. ð
SFS230 SFS231SFS232 SFS210
672
PROSTHETICS
FOOT ADAPTERS — Continued
a.
Symes Nut
Standard/heavy duty. Sold each. From Kingsley Manufacturing.
Item No. ð
K2016
b.
Seattle Symes Nut
Provides a broad, solid anterior support surface. Fabricated from aluminum alloy. Abrasive etch finish ensures
secure socket adhesion during fabrication. For laminated sockets, maximum weight of 300 lb (136kg). Sold
each. From Trulife.
Item No. ð
SSY300
FOOT BOLTS
c.
Kingsley Foot Bolt
Sold each. From Kingsley Manufacturing.
Description
Item No.ò
Kingsley SACH Foot Bolt, 3” x 3/8-16
K20103
PROSTHETICS
d.
Seattle Foot Bolts
Description
Item No.ò
Seattle Foot Bolt, 10mm x 55mm
SFB540
SFB542
SFB545
PROSTHETICS
673
BLOCKS
e.
Durathane BK Shin Block
Lighter and easier to shape than wood. Slight taper. 18” height, 7” diameter, 1-3/16 center hole. Sold each.
From Hosmer.
Item No. ð
70018
f.
Seattle Ankle Block
Designed for use with Seattle feet in exoskeletal construction. High strength rigid polyurethane foam surrounds a nylon core. Lightweight and durable enough to withstand the forces imposed by a dynamic response
foot. Rated to 300 lb (136kg). Core diameter 2” (51mm). Largest width 4-1/2” (114mm). Sold each. From Trulife.
Description
Item No.ò
Standard, 4-7/8” (124mm) Height, Weight 426g
SAB310
Low Profile, 3-3/8” (86mm) Height, Weight 369g
SAB320
g.
Durathane Ankle Block
Sold each. Bolt sold separately. From Hosmer.
Block Length
SACH 3/8” Bolt
10mm Bolt
5-3/4”
55915
70477
8”
55917
70479
h.
Seattle Laminating Core
Item No. ð
SLC300
PROSTHETICS
High strength, low profile alternative to an ankle block. Requires minimal keel to socket clearance. Ribbed
nylon for secure adhesion in the lamination process. For laminated sockets. Rated to 300 lb (136kg). Product
i.
Heel Cushion Material
Heel cushion material for build-ups or heel height modification. From Kingsley.
Derometer
Extra Soft
Soft Medium
Firm
Wedge (pictured)
K20HW-XS20HW-SK20HW-MK20HW-F
Small Block
K20HCBS-XS20HCBS-SK20HCBS-MK20HCBS-F
Large Block
K20HCB-XS20HCB-SK20HCB-MK20HCB-F
674
PROSTHETICS
AK FOAM COVERS
a.
Transfemoral Foam Cover
Neuter, 30”. Sold each. From Fillauer.
Item No. ð
189120
b.
AK Soft Foam Cover
Pre-shaped conventional soft foam. Removable inner thigh section. Shin section accepts 30mm pylon. Sold
each. From Hosmer.
Side
Left
Right
Item No. ð
5917056866
c.
AK Foam Cover
94cm length. 30° knee flexion. Pre-shaped and drilled with stepped center hole. Beige. Made of PUR flexible
foam. From Ottobock.
Calf/Side
Item No. ð
36cm Left
36cm Right
40cm Left
DISCON
DISCON
DISCON
40cm Right
44cm Left
44cm Right
DISCON3R6=L443R6=R44
PROSTHETICS
d.
AK Foam Cover
94cm length. 30° knee flexion. Pre-shaped and drilled with stepped center hole. Beige. Made of PUR flexible
foam. From Ottobock.
Calf/Side
36cm Left
Item No. ð
3R24=L36 3R24=R36 3R24=L40 3R24=R403R24=L44 3R24=R44
36cm Right
40cm Left
40cm Right
44cm Left
44cm Right
PROSTHETICS
e.
675
AK Foam Cover
94cm length. 30° knee flexion. 44cm calf circumference. Pre-shaped and drilled with stepped center hole.
Beige. Made of PUR flexible foam. From Ottobock.
Side
Left
Right
Item No. ð
3S26=L
3S26=R
f.
Soft Foam Cover
Urethane. Available in 18” and 24” core depths. Pre-shaped for ease of finishing. Flame resistant material.
Length
Core Depth
Left
Right
36” (91cm)
18” (46cm)
P41820P41821
36” (91cm) 24” (61cm)
P41822P41823
g.
Standard AK Foam Cover
Durable foam with center hole. Standard or Vacuum packaging. Sold each. From WillowWood.
Packaging
Standard
Side
Standard
Vacuum
Vacuum
LeftRightLeftRight
Buff
CFB-1AK-LB
CFB-1AK-RB CFB-1AK-LB-VCFB-1AK-RB-V
Medium Brown
CFB-1AK-LM
CFB-1AK-RM CFB-1AK-LM-VCFB-1AK-RM-V
Easy Shape AK Foam Cover
Less density for easier shaping. Features center hole. Standard or Vacuum packaging. Sold each. From WillowWood.
Packaging
Standard
Side
Standard
Vacuum
Vacuum
PROSTHETICS
h.
LeftRightLeftRight
Buff
CFB-3AK-LB
CFB-3AK-RB CFB-3AK-LB-VCFB-3AK-RB-V
Medium Brown
CFB-3AK-LM
CFB-3AK-RM CFB-3AK-LM-VCFB-3AK-RM-V
676
PROSTHETICS
BK FOAM COVERS
a.
Cosmetic Soft Foam Cover
Made of PE foam. For modular and transtibial prostheses. Not pre-shaped. Skin color. Sold each. From Euro
International.
Item No. ð
60A8
b.
BK Foam Cover
Neuter, 21.5”. Sold each. From Fillauer.
Item No. ð
189122
c.
Foam Fairings
Closed cell polyethylene foam. Medium density. 6” diameter. Sold each. From Fillauer.
Description
18”
18” w/Cavity
21.5”
24”
Item No. ð 189112 189118189116 189117
d.
BK Foam Cover
PROSTHETICS
6” diameter. 21” length. Sold each. From Friddle’s Orthopedic.
Item No. ð
700119-FR
e.
ProFormance® Caucasian Foam Cover
Caucasian color. Sold each.
Description
1” Hole
1.25” Hole
Item No. ð
PF-BKFC-100-CPF-BKFC-125-C
PROSTHETICS
f.
677
ProFormance® Foam Cover
Plastazote. 6” diameter. 21” length. White. Sold each or bulk.
Count
Each
25/Pkg
Item No. ð
PF-BKFC-621PF-BKFC-PTZ
g.
ProFormance® Foam Fairing
Closed cell polyethylene foam. Medium density. 6” diameter. Sold each.
Length
18”
18”
21.5”
with Cavity
Item No. ð
PF-BKFF-180PF-BKFF-180C PF-BKFF-215
h.
Plastazote® Foam Cover
Easily shaped by heating and/or sanding. Sold each.
Item No. ð
56798-FP
i.
Foam Cover
55cm length. Features a drilled center hole compatible with either 30mm or 34mm diameter systems. Universal
design can be used left or right. Beige color. Made of PUR flexible foam. From Ottobock.
6R6=B
PROSTHETICS
Item No. ð
j.
Foam Cover
48cm length. Features a drilled center hole compatible with either 30mm or 34mm diameter systems. Universal
design can be used left or right. Square. Beige color. Made of PE foam. From Ottobock.
Hole
30mm
34mm
Item No. ð
6R8=30
3R8=34
678
PROSTHETICS
BK FOAM COVERS — Continued
a.
Standard BK Foam Cover
Firm and lightweight. 1” center hole is compatible with 18mm and 23mm tubes. 1-1/4” center hole is compatible with 30mm tubes. Sold each. From WillowWood.
Packaging
Standard
Vacuum
1” Center Hole, Buff
CFB-1BK-B-25CFB-1BK-B-25V
1” Center Hole, Medium Brown
CFB-1BK-M-25CFB-1BK-M-25V
1-1/4” Center Hole, Buff
CFB-1BK-B-32CFB-1BK-B-32V
1-1/4” Center Hole, Medium Brown
CFB-1BK-M-32CFB-1BK-M-32V
b.
Foam Cover
48cm length. Pre-shaped and features a drilled center hole compatible with either 30mm or 34mm diameter
systems. Universal design can be used left or right. Beige color. Made of PE foam. From Ottobock.
Hole
30mm
34mm
Item No. ð
6R18=30
3R18=34
c.
EZ Cover
EZ Cover offers an alternative to the labor-intense process of creating a conventional prosthetic foam cover.
Simply adjust the pre-shaped form to the appropriate circumferential size and cut as needed. The proprietary
material also allows for heat modification. Kit includes form, connector and cloth tape. From ST&G.
Item No. ð
4001
PROSTHETICS
d.
Foam Foot Connector
Provides a non-rigid transition between the foot and soft foam cover. 1” thick firm expanded polyethylene.
Easily shaped. Sold each. From Trulife.
Item No. ð
P21406
PROSTHETICS
679
COSMETIC COVERS and SKINS
e.
ALPS EasySkin™ TSK
ALPS™ cosmetic covers are pre-stretched and are heated to shrink to size. After pulling skin over prosthesis, use a heat gun to start at the toes and work up to the proximal brim. If needed, a vinyl contact cement
can be used or super glue for a permanent bond. Can be used on transtibial patients. For use with suction
suspension applications, place a small hole so the cosmetic cover does not inflate. Sold each. Please specify
color (C) when ordering. Swatch ring listed below.
Color Selection
3
5
7
9
11
12
13
Skin tones pictured here are approximate.
Description
Item No.ò
Standard Small, 18-23cm Foot Length, 17-22cm Ankle*, 25-35cm Calf Circumference
TSK-(C)-S
Standard Large, 23-30cm Foot Length, 22-29cm Ankle*, 35-45cm Calf Circumference
TSK-(C)-L
SWATCH-TSKALPS Thermoskin Swatch Ring
f.
Dream Skin
Offering the lifelike cosmetic quality of a custom cosmesis at an off-the-shelf price, Dream Skin is a heat
shrinkable leg covering that combines superior durability and stain-resistant cosmesis with the elastic properties necessary for easy donning and application. The unique waterproof, closed-cell Micro Coated Vinyl
resists marks, cleans easily and reduces friction with clothing. Dream Skin is available with or without split
toe in five sizes and 18 skin tones. Sold each. From Centri. Please specify color when ordering by replacing
** in item number with 2-digit color code.
Color Selection
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
Foot Size
Length
21-22cm
23-24cm
25-26cm
27-28cm
29-30cm
19.7” (500mm)
21.6” (550mm)
23.6” (600mm)
21.6” (550mm)
23.6” (600mm)
421221**4423241**4425261**4427281**4429301**4
Right
421222**4423242**4425262**4427282**4429302**4
Left Split Toe
421223**4423243**4425263**4427283**4429303**4
PROSTHETICS
Left
Right Split Toe
421224**4423244**4425264**4427284**4429304**4
56760
Color Swatch Book
g.
Silskin
Lightweight elastic reinforcing silicone cosmetic cover. Caucasian (30G). Washable. Sold each. From Hosmer.
Style
Ankle
Circumf
Knee Center Item No.ò
to Floor
Leg
Size
Foot Size
Thigh
Circumf*
Calf
Circumf
AK
Small
5.5-7
16.5”
12.6”
7.5”
18.1”
59098
AK
Medium
7.5-9
18.1”
14”
8.7”
18.3”
59099
AK
Large
9.5-11
19.3”
15.7”
9.4”
19.5”
59100
AK
Md w/Sm Foot 5.5-7
18.1”
14”
8.7”
18.3”
59102
BK
Small
5.5-8
11.8”
7.3”
24”
59541
BK
Medium
8.5-11
12.6”
8.3”
25.8”
59542
*Thigh circumference measured 8.3” (210cm) from knee center.
680
PROSTHETICS
COSMETIC COVERS and SKINS — Continued
a.
SoftTouch Protective Outer Surface Cover
SoftTouch Protective Outer Surface Cover from Ottobock features a special surface coating which improves
moisture and dirt resistance. They are pulled over the foam cover to add splash water resistance, dirt resistance
and enhance visual appearance. SoftTouch Stockings are extremely stretchable. They fit transtibial prostheses
and come in small, medium and large in 10 colors. They are ideal in combination with the Ottobock 6R8 or
6R18 PE Foam Covers. Please specify color when ordering by replacing (C) in item number with color code
Color Selection
0
2
4
6
8
10
12
14
16
18
Item No.ò
Size
Calf Circ
Ankle Circ
Foot Length
2
30-33cm
19-21cm
> 21cm
99B116=2-(C)
2
34-39cm
22-25cm
> 22cm
99B116=2-(C)
2
40-45cm
26-29cm
> 25cm
99B116=2-(C)
646M22SoftTouch Color Swatch Book
b.
U-Flate Skin Sleeve
Flexible, durable and shrinkable with a proven track record of dependability, U-Flate skin sleeves are available
in 33 stock colors and four sizes to allow a custom look and feel with an off-the-shelf product. U-Flate skins
can also be custom ordered with the illusion of hair or freckles. Sold each. From PRS.
Standard Color Selection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Realistic Color Selection
R05
R09
R13
R17
R21
R25
R29
R33
R37
R41
R45
R49
R53
R57
R61
PROSTHETICS
Size
X-Small
Small
Medium
Large
Length 30”36”36”36”
Ankle
6.25-12”
6.75-12”
9-16.5”
11” and up
Calf
8.75-16”
12.25-20”
15-25”
17” and up
Thigh
12-20”
14-22”
17.5-27”
19.5” and up
Minimum Foot Size
18cm
22cm
25cm
27cm
AK
UFXS (color)
UFS (color)
UFM (color)
UFL (color)
BK
BKUFXS (color) BKUFS (color) BKUFM (color) BKUFL (color)
SWATCH-100502Swatch Ring
PROSTHETICS
c.
681
Skinergy™ Plus
Skinergy™ Plus cosmesis with seamless design has a less tacky feel than other silicone products, improved
tear resistance and up to 25% stretch. Available for any foot with a split or closed toe design in sizes 22-30cm.
Lifelike toenails accept standard nail polish and remover. 19 skin tones to choose from. Easily cleaned with
soap and water. Length measured from floor. Sold each. From RSL Steeper.
Standard Color Selection
/E0
/E1
/E2
/E3
/E4
/E5
/E6
/E7
/E8
/E10
/E11
/E12
/E13
/E14
/E15
/E16
/E17
/E18
/E9
Foot Size
Skin Size
Ankle Range
Mid Calf Range
Top Range
Length to Calf
Length to Top
22-23cm 22-23cm 24-25cm 24-25cm 26-27cm 26-27cm 28-30cm 28-30cm
SmallLargeSmallLargeSmallLargeSmallLarge
20-25cm 20-25cm 22-27.5cm 22-27.5cm 22-28cm 22-28cm 24-30cm 248-30cm
28-35cm 32-40cm 31-39cm 35-44cm 32-40cm 37-46cm 34-42.5cm 39-49cm
26-32.5cm30-37.5cm 29-36cm 33-41cm 30-37.5cm 35-44cm 32-40cm 37-46cm
32cm
32cm
43.5cm
43.5cm
37cm
37cm
39.5cm
39.5cm
55cm
55cm
57cm
57cm
61cm
61cm
66cm
66cm
Foot Size
Split Toe Left
TLC22LSTLC22LLTLC24LSTLC24LLTLC26LSTLC26LLTLC28LSTLC28LL
Split Toe Right
TLC22RSTLC22RLTLC24RSTLC24RLTLC26RSTLC26RLTLC28RSTLC28RL
Closed Toe Left
TNS22LSTNS22LLTNS24LSTNS24LLTNS26LSTNS26LLTNS28LSTNS28LL
Closed Toe Right TNS22RSTNS22RLTNS24RSTNS24RLTNS26RSTNS26RLTNS28RSTNS28RL
E24658Swatch RingNCT9740
E22630(Color) Patch Kit
OPS-100
E22632(Color) Spare Patches (5)
d.
25mm Punch Tool
Skinergy Silicone Adhesive, .25 oz Tube
Endoskeletal Cosmesis
Universal cosmesis shape for temporary or permanent application. Made of durable urethane for quick, easy
finishing. Easy access for alignment changes. For use with the following Seattle feet: Turas, Carbon LightFoot,
LightFoot², LightFoot² with Titanium Pyramid, LightFoot, Natural Foot or SACH Foot. Caucasian (pictured),
Light Brown or Dark Brown. Product height 26cm (sizes 22-25cm); 39cm (sizes 26-29cm). Sold each. From Trulife.
22cm
23cm
24cm
25cm
Caucasian, Left
SEC201-22L SEC201-23LSEC201-24L SEC201-25L
Light Brown, Left
Dark Brown, Left
Caucasian, Right
SEC201-22R SEC201-23RSEC201-24R SEC201-25R
Light Brown, Right
PROSTHETICS
Foot Size
Dark Brown, RIght
Foot Size
26cm
27cm
28cm
29cm
Caucasian, Left
Light Brown, Left
Dark Brown, Left
Caucasian, Right
Light Brown, Right
Dark Brown, RIght
682
PROSTHETICS
COSMETIC COVERS and SKINS — Continued
C-ME™ Pre-Sewn Prosthetic Sleeves and Lamination Panels
a.
C-ME™ Pre-Sewn Prosthetic Sleeves slip over the BK prosthesis for an individual look and are available in
the fabrics below. These fabrics are also available as 20” x 20” Lamination Panels for custom fabrication use.
From New Options Sports.
American Flag and
Red Lightning
Fabric Design
American Flag
Native Beads
Yellow/Blue Wave
Orange/Yel Wave
Sleeve Adult SM/MD
CME SM D7263
CME SM DV1
CME SM R1
CME SM R2
Sleeve Adult MD/LG
CME ML D7263
CME ML DV1
CME ML R1
CME ML R2
20” x 20” Panel
CME LM D7263
CME LM DV1
CME LM R1
CME LM R2
Fabric Design
Camouflage
Red Lightning
Blue Lightning
Neon Lightning
Sleeve Adult SM/MD
CME SM R3
CME SM R1501
CME SM R1502
CME SM R1507
Sleeve Adult MD/LG
CME ML R3
CME ML R1501
CME ML R1502
CME ML R1507
20” x 20” Panel
CME LM R3
CME LM R1501
CME LM R1502
CME LM R1507
PROSTHETICS
Fabric Design
Green Floral Red Flame
Blue Flame
Blue Sunshine
Sleeve Adult SM/MD
CME SM R1511 CME SM R4500
CME SM R4501
CME SM R6501
Sleeve Adult MD/LG
CME ML R1511 CME ML R4500
DISCON
CME ML R6501
20” x 20” Panel
CME LM R1511 CME LM R4500
CME LM R4501
CME LM R6501
Fabric Design
Neon Graffiti
Buttons and Bubbles
Metallic Flag
Sleeve Adult SM/MD
CME SM R7478
CME SM R7504
CME SM R8178
Sleeve Adult MD/LG
CME ML R7478
CME ML R7504
CME ML R8178
20” x 20” Panel
CME LM R7478
CME LM R7504
CME LM R8178
PROSTHETICS
Prosthetic Feet
683
PROSTHETIC FEET: CENTRI
b.
Element Foot
The Element Foot sets itself apart from two spring prosthetic foot designs by adding an innovative third
element. Emotis has designed the Element to support each phase of foot function in the gait cycle—from
heel strike, to mid-stance, to toe off. The result is a foot with unsurpassed smoothness, stability and performance throughout the gait cycle. Kit includes foot, heel bands and elastomers, Spectra sock, and instruction
manual. Centri® MCV Foot Shell sold separately. Rated to 275 lb. Activity Level: K3, K4. 3 year warranty. Sold
each. From Centri.
Size
Clearance Ht
Foot Wt
Footshell Wt
22-24cm
72mm
260g
127g
25-28cm
88mm
360g
159g
29-30cm
88mm
420g
219g
Keel Selection Guide by Adjusted Patient Weight1
Size 22cm
23cm
24cm
25cm
26cm
27cm
28cm
29cm
30cm
100-119 lb
A11
A11
A11
A32 A32
----
120-139lb A11A11A11A32A32A43A43 -
-
140-159lb A11A11A11A32A32A43A43C64C64
160-179lb A22A22A22A43A43A43A43C64C64
180-199lb A22A22A22B43 B43 B54 B54 C64 C64
200-224lb A32A32A32B53 B53 B54 B54 D75D75
225-249lb ---
C54
C54
C65
C65
D75
D75
250-275lb ---
C64
C64
C65
C65
D75
D75
Adjusted weight = patient body weight + loads normally or routinely carried.
1
Complete the item number below by choosing from options beneath t. (Example: 100-10-27-B43)
Item No. ð
100 - 10 - (Size) - (Keel)
Size tKeel
t
PROSTHETICS
22cm 22A11
A11
23cm 23A22
A22
24cm 24A32
A32
25cm 25A43
A43
26cm 26A64
A64
27cm 27B43
B43
28cm 28B53
B53
29cm 29B54
B54
30cm 30B64
B64
C54 C54
C64 C64
C65 C65
D75 D75
Centri® MCV Foot Shell2
2
Caucasian default color. Custom colors available by special order with 3 week lead time.
Complete the item number below by choosing from options beneath t. (Example: 452713033)
Item No. ð
(Side) (Size) 13033
Size
tKeel
t
Left 4522cm
22
Right 4623cm
23
24cm 24
25cm 25
26cm 26
27cm 27
28cm 28
29cm 29
30cm 30
684
Prosthetic Feet
PROSTHETICS
PROSTHETIC FEET: CENTRI — Continued
a.
Element DS Foot System
The Element Foot System’s third Element technology produces an incredibly smooth rollover. Adding the
DuraShock increases the vertical shock absorption and adds axial rotation. The elastomers and carbon components work together to absorb, store and return energy in vertical and horizontal planes. The result is a
foot system that provides a high level function and requires only 6.5 inches of clearance. Kit includes Element
foot with DuraShock unit attached, Spectra sock, heel bands, wedge elastomers and instructions. Centri®
MCV Foot Shell sold separately. Rated to 275 lb. Activity Level: K3, K4. 3 year warranty. Sold each. From Centri.
Size
Clearance Ht
Foot Wt
Footshell Wt
22-24cm
142mm
550g
127g
25-29cm
158mm
660g
159g
30cm
158mm
760g
219g
Size 22cm
23cm
24cm
25cm
26cm
27cm
28cm
29cm
30cm
100-119 lb
A11R
A11R
A11R
A32R
A32R
----
120-139lb
A11RA11RA11RA32RA32BA43BA43B -
140-159lb
A11RA11RA11RA32BA32BA43BA43KC64KC64K
160-179lb
A22RA22BA22BA43BA43BA43KA43KC64KC64K
180-199lb
A22BA22BA22BB43BB43KB54KB54KC64KC64K
200-224lb
A32B
A32K
A32K
B53K
B53K
B54K
B54K
D75K
-
D75K
225-249lb ---
C54K
C54K
C65K
C65K
D75K
D75K
250-275lb ---
C64K
C64K
C65K
C65K
D75K
D75K
1
Item No. ð
105 - 10 - (Size) - (Keel) (DS)
PROSTHETICS
Size
tKeel
tDS
t
22cm 22A11
A11RedR
23cm 23A22
A22Blue
B
24cm 24A32
A32Black
K
25cm 25A43
A43
26cm 26A64
A64
27cm 27B43
B43
28cm 28B53B53
29cm 29B54
B54
30cm 30B64
B64
C54
C54
C64
C64
C65
C65
D75
D75
2
Item No. ð
(Side) (Size) 13033
Size
tKeel
t
Left 4522cm
22
Right 4623cm
23
24cm
24
25cm
25
26cm
26
27cm
27
28cm
28
29cm
29
30cm
30
PROSTHETICS
b.
Prosthetic Feet
685
Ibex Foot System
The Ibex Foot System’s innovative micro-slices in the Ibex pylon and the split heel plate provide controlled
inversion/eversion for terrain conformance. The multi-axis design is energy optimized with a long carbon pylon
and full length heel plate that allows the Ibex to reach foot flat sooner and store more energy. The unique
components of the Ibex work together from heel strike to toe off to provide stability without sacrificing
energy return. Includes foot, elastomer heel wedge, heel band, Spectra Sock and instruction manual. Centri®
MCV Foot Shell sold separately. Rated to 275 lb. Activity Level: K3, K4. 3 year warranty. Sold each. From Centri.
Specifications (Ibex)
Weight Capacity: 330 lb
Activity Level: K3, K4
Product Weight: 459g
Build Ht: 6.75” (17cm)
Specifications (Ibex XD)
Product Weight: 602g
Build Ht: 7.63” (19cm)
Size 22cm
23cm
24cm
25cm
26cm
27cm
28cm
29cm
30cm
100-119 lbA2
A2
A2
B4
B4----
120-139 lb A2A2A2B4 B4 C5 C5 - -
140-159 lb B3B3B3B5B5C5C5D6D6
160-179 lb B3B3B3B5B5C6C6D6D6
180-199 lb B4A4B4C6C6C6C6D7D7
200-224 lb B4A4B4C6C6D7D7D7D7
225-249 lb
- - - D7D7D7D7E8 E8
250-275 lb - - - D7D7E8E8E8E8
276-300 lb - - - E8E8E8E8E9E9
301-330 lb - - - E8E8E8E8E9E9
331-440 lb
-
-
-
E8XDE8XDE9XDE9XDE9XDE9XD
1
Complete the item number below by choosing from options beneath t. (Example: 120-10-27-C5)
Item No. ð
120 - 10 - (Size) - (Keel)
Size
tKeel
t
PROSTHETICS
22cm 22A2
A2
23cm 23B3
B3
24cm 24B4
B4
25cm 25B5
B5
26cm 26C5
C5
27cm 27C6
C6
28cm 28D6
D6
29cm 29D7
D7
30cm 30E8
E8
E9 E9
E8XDE8XD
E9XDE9XD
2
Item No. ð
(Side) (Size) 13033
Size
tKeel
t
Left 4522cm
22
Right 4623cm
23
24cm
24
25cm
25
26cm
26
27cm
27
28cm
28
29cm
29
30cm
30
686
Prosthetic Feet
PROSTHETICS
PROSTHETIC FEET: CENTRI — Continued
a.
Wave Comfort Foot System™
The Wave Comfort Foot System brings an exceptional level of comfort to the low to moderate activity user.
The unique tri-spring design elements work in concert to provide seamless transition and stable progression
from heel-strike to toe-off. The coupled springs react in a compliant manner that promotes a supple feel while
maintaining the dynamic response expected in carbon composite feet. The novel wave spring and variable
durometer heel bumpers enhance stability at heel strike through shock absorption and plantar flexion as the
wave spring flexes and extends. The smooth action of the heel rocker combined with the stable dynamics
of the forefoot insure a “Wave of Comfort” from heel to toe. Rated to 275 lb. 3 year warranty. Centri® MCV
Foot Shell and pyramid adapters sold separately.Rated to 275 lb. Activity Level: K3, K4. 3 year warranty. Sold
each. From Centri.
Size
Clearance Ht
Foot Wt
Footshell Wt
22-23cm
96mm
320g
127g
24-26cm
102mm
346g
159g
27-30cm
102mm
424g
219g
Size 22cm
23cm
24cm
25cm
26cm
27cm
28cm
29cm
30cm
44-50 kg
B22
B22
B22
B23
B23
----
51-60 kg B22B22B22B23B23B34B34 -
-
61-70 kg B22B22B22B34B34B34B34C45C45
71-80 kg C33C33C33B34B34C45C45C45C45
81-90 kg C33C33C33C45C45C45C45D56D56
91-100 kg C33C33C33C45C45D56D56D56D56
101-112 kg
-
-
- D56D56D56D56E67 E67
113-125 kg
-
-
- D56D56D67E67E67E67
1
Item No. ð
135 - 10 - (Size) - (Keel)
PROSTHETICS
Size tKeel
t
22cm 22B22
B22
23cm 23B23
B23
24cm 24B34
B34
25cm 25C33
C33
26cm 26C34
C34
27cm 27C45
C45
28cm 28D56
D56
29cm 29D67
D67
30cm 30E67
E67
2
Item No. ð
(Side) (Size) 13033
Size
tKeel
t
Left 4522cm
22
Right 4623cm
23
24cm 24
25cm 25
26cm 26
27cm 27
28cm 28
29cm 29
30cm 30
PROSTHETICS
Prosthetic Feet
687
PROSTHETIC FEET: CUSTOM CARBON COMPOSITE CREATIONS
b.
SAFE II Foot
Solid Ankle Flexible Endoskeleton foot with defined toes. From Custom Carbon Composite Createions.
Height and Width Availability by Size
Height222324252627282930
3/4”
WWWWWWWWW
3/8”
N
N
W, N
W, N
W, N
W, N
W, N
W, N
W
1/4” WWWWWWW
Complete the item number below by choosing from options beneath t. (Example: S2SO38MW27R1)
Item No. ð
S2 (Type) (Keel) (Height) (Heel) (Width) (Size) (Side) (Color)
Type tKeel
tHeight
tHeel
tWidthtSizetSidetColor
t
Standard
SStdO3/8”38SoftSWideW 22cm 22LeftLCaucasian1
Syme
YHigh
R3/4”34MedMNarrow
N23cm
23Right
R
Lt Negroid 2
Adj Endo ALow
Y1/4”14FirmF 24cm
24
Md Negroid 3
Adj Exo X25cm
25
Dk Negroid 4
Wproof
W26cm
26
Lt Latin
5
HD H27cm
27
Med Latin 6
WP HD
V28cm
28
Dk Latin
7
WP Syme Z29cm
29
30cm
30
PROSTHETIC FEET: HOSMER
c.
Raize
PROSTHETICS
The Raize is a unique microprocessor controlled hydraulic ankle/foot system in a low profile, lightweight
design. Its plantar/dorsi-flexion range reduces damaging forces on the residual limb and greatly enhances
stability on slopes and slippery surfaces. By simply pressing a button the wearer can control rollover resistance, lock or unlock the ankle, and adjust the heel height as needed. Adjustable heel height, resistance and
lock via control pod or remote fob. Terrain accommodation mode aids gait on inclines and declines. Ankle
system simulates natural ankle movement and reduces shock. Intuitive computer interface for initial setup
by prosthetist. 2 year limited warranty. 6 month foot shell warranty. Sold each. From Hosmer.
Specifications
Product Wt: 735-797g
Activity Level: K3
Build Height: 9-9.5cm”
Selection Guide by Patient Weight
Size
24cm
25cm
26cm
27cm
28cm
29cm
30cm
100-130 lb
628696287262876628806288462917-
131-160 lb
62870628736287762881628856291862921
161-190 lb
62871628746287862882628866291962922
191-220 lb
-
628756287962883629166292062923
Centri MCV Foot Shell (sold separately)
Size
24cm
25cm
26cm
27cm
28cm
29cm
30cm
Left
452413033452513033452613033452713033452813033452913033453013033
Right
462413033 462513033 462613033 462713033 462813033 462913033 463013033
688
Prosthetic Feet
PROSTHETICS
PROSTHETIC FEET: KINGSLEY
a.
Low Profile Foot
Natural toes. 3/4” heel height. Eastern hard-rock maple keel. Sold each. From Kingsley.
Complete the item number below by choosing from options beneath t. (Example: K01L9M-4A)
Item No. ð
(Type) (Side) (Size) (Heel) - (Color)
Description
Type
tSide
tSizetHeel
tColor
Solid Ankle Cushioned Heel SACH
K01Left
L22cm
05Soft
S
Geriatric / Light Duty User
Litefoot K09Right
R23cm
06Med
M
Stored Energy / Flexible Keel STEN
K01ST
24cm07Firm
F
Dynamic Elastic Response
Steplite* KC01 25cm
08
Ankle Disarticulation
Syme’s K07 26cm
09
500 lb w/Integrated Pyramid HD500 KT1 27cm
10
28cm
11
29cm
12
30cm
13
31cm
14
32cm
15
33cm
16
t
Caucasian
Cauc, Lt
CL
Negroid, Lt 4A
Negroid, Dk 7A
Latin L
Oriental
O
*KC01 available with Medium heel only.
b.
Flattie Foot
Foot for flats, sandals and ski boots. Natural toes. 3/8” heel height. Eastern hard-rock maple keel. Sold each.
From Kingsley.
Item No. ð
DescriptionType
tSide
tSizetHeel
tColor
K051LeftL22cm
05Soft
S
Litefoot K0951RightR23cm
06Med
M
K051ST
24cm 07Firm
F
Dynamic Response SACH
Steplite* KC051
25cm08
26cm
09
27cm
10
28cm
11
t
Caucasian
Cauc, Lt
CL
Negroid, Lt 4A
Negroid, Dk 7A
Latin L
OrientalO
PROSTHETICS
c.
Strider Foot
Foot for tennis shoes and men’s flatter-heeled shoes. Natural toes. 1/4-3/8” heel height. Eastern hard-rock
maple keel. Sold each. From Kingsley.
Item No. ð
DescriptionType
tSide
tSizetHeel
tColor
K08Left
L22cm
05Soft
S
Litefoot K0908Right R23cm
06Med
M
K08ST
24cm07Firm
F
Dynamic Elastic Response
Steplite* KC08 25cm
08
Ankle Disarticulation
Syme’s K0708
26cm09
500 lb w/Integrated Pyramid HD500 KT8 27cm
10
28cm
11
29cm
12
30cm
13
31cm
14
32cm
15
33cm
16
t
Caucasian
Cauc, Lt
CL
Negroid, Lt 4A
Negroid, Dk 7A
Latin L
OrientalO
PROSTHETICS
d.
Prosthetic Feet
689
Post-Op Flatfoot
Molded SACH foot for light duty barefoot walking and IPS weight bearing training. Plain toes. Flat heel.
Eastern hard-rock maple keel. Sold each. From Kingsley.
Complete the item number below by choosing from options beneath t. (Example: K10LM-4A)
Item No. ð
K10 (Side) (Size) - (Color)
DescriptionType
tSide
tSizetColor t
Litefoot K10Left
L24cm
S
Caucasian
Right
R26cm
M
Cauc, Lt
CL
28cm
L
Negroid, Lt 4A
Negroid, Dk
7A
LatinL
Oriental
O
PROSTHETIC FEET: NABTESCO-PROTEOR-USA
e.
GERY Foot
The GERY foot from Proteor aims at providing very weak amputees with all the security they deserve by
ensuring comfort, lighter weight and easy step completion. The GERY foot is ideal for K1 patients with a
limited indoor walking perimeter. The innovative rigid rocker shaped core provides an easy gait and full
step completion and is fitted with pyramid connector. Made of closed-cell foam, the lightweight foot shell
is washable and resistant to dirt and humidity. The GERY foot is 30% lighter than an average SACH foot,
reducing heel lift efforts during walking. Sizes 22-27 are rated to 220 lb; sizes 28-29, to 275 lb. 10cm build
height. From Nabtesco-Proteor-USA.
22cm
23cm
24cm
25cm
Max Weight
220 lb
(100kg)
220 lb
(100kg)
220 lb
(100kg)
220 lb
(100kg)
Left
1A200-G22 1A200-G231A200-G24 1A200-G25
Right
1A200-D22 1A200-D231A200-D24 1A200-D25
Size, Continued
26cm
27cm
28cm
29cm
Max Weight
220 lb
(100kg)
220 lb
(100kg)
275 lb
(125kg)
275 lb
(125kg)
Left
1A200-G26 1A200-G271A200-G28 1A200-G29
Right
1A200-D26 1A200-D271A200-D28 1A200-D29
PROSTHETICS
Size
690
Prosthetic Feet
PROSTHETICS
PROSTHETIC FEET: TRULIFE
a.
Seattle Catalyst
Designed for levels K3 and K4, the Seattle Catalyst provides shock absorption, controlled plantar flexion,
multi-axial rotation, smooth rollover and split keel stability in one lightweight package. Includes three
interchangeable heel wedges, one each: 1/4” (6.4mm), 3/8” (9.5mm) and 1/2” (12.7mm). Rated to 366 lb
(166kg). Minimum Clearance is 7.1” (18cm). Product weight 449g at 25cm. Foot shell, Spectra sock, shoe horn
and three heel wedges included. 3 year warranty on hard components; 6 month warranty on foot shell and
Spectra sock. From Trulife.
Suggested Keel Selection Guide Activity Level
Low
Med-Low
Medium
Med-High
High
Keel 5
296-366 lb
(134-166kg)
264-366 lb
(120-166kg)
226-366 lb
(103-166kg)
181-300 lb
(82-136kg)
131-220 lb
(59-99kg)
Keel 4
231-295 lb
(105-133kg)
207-263 lb
(94-119kg)
151-225 lb
(69-102kg)
69-180 lb
(31-81kg)
<131 lb
(<59kg)
Keel 3
136 -230 lb
(62-104kg)
118-206 lb
(53-93kg)
<151 lb
(<69kg)
Keel 2
<136 lb
(<62kg)
<69 lb
(<31kg)
<118 lb
(<53kg)
Weight ranges provided by Trulife.
Complete the item number below by choosing from options beneath t. (Example: SHF29027R3M7)
Item No. ð
SHF (Cosmesis) (Size) (Side) (Keel) (Length) (Size Digit 2)
CosmesistSize
tSide
t
Keel
tLength
t
Size Digit 2 t
Caucasian
29022cm
22Left
L
Keel 2 222-24cm
S22cm 2
Light Brown 29123cm
23Right
R
Keel 3 325-27cm
M23cm 3
Dark Brown
29324cm
24
Keel 4 428-30cm
L24cm 4
25cm
25
Keel 5 5 25cm 5
26cm
26 26cm6
27cm
27 27cm
7
28cm
28 28cm
8
29cm
29 29cm
9
30cm
30 30cm
0
PROSTHETICS
Note: Choosing a lower keel than what is suggested in the Guidelines above will void the warranty.
If your patient’s weight and/or activity level exceed the limits of the chart, please call Trulife for assistance.
PROSTHETICS
b.
Prosthetic Feet
691
Seattle LP Foot
The Seattle LP foot from Trulife is a low profile foot designed for long residual limbs. It features a multi-axial
ankle, c-shape design which replicates true, anatomical plantar flexion, a full length, split composite keel
for stability on uneven surfaces and removable foot shell. Recommended for medium to high activity K3-K4
amputees with a maximum weight of 300 lb (136kg) for medium activity level. Minimum clearance: 3.6” (9cm).
3/8” heel rise. Product weight 400g at 25cm (without foot shell). 3 year warranty on keel; 6 month warranty
on foot shell. Foot Shell, Spectra Sock and Bearing Kit included. From Trulife.
Low
Med-Low
Medium
Med-High
High
Keel 4
(Sizes 26-30)
223-300
lb 223-300 lb
223-300 lb
194-260 lb
179-240 lb
(101-136kg)(101-136kg)(101-136kg)(88-118kg) (81-109kg)
Keel 3
(Sizes 22-30)
179-220 lb
179-220 lb
179-220 lb
163-192 lb
150-176 lb
(81-100kg)(81-100kg)(81-100kg)(74-87kg) (68-80kg)
Keel 2
(Sizes 22-30)
134-176
lb 134-176 lb
134-176 lb
123-161 lb
112-148 lb
(61-80kg)(61-80kg)(61-80kg)(56-73kg) (51-67kg)
Keel 1
(Sizes 22-30)
<132 lb <132 lb
<132 lb
<121 lb
<110 lb
(<60kg)(<60kg)(<60kg)(<55kg) (<50kg)
Complete the item number below by choosing from options beneatht. (Example: SLP35022L1S2)
Item No. ð
SLP (Cosmesis) (Size) (Side) (Keel) (Length) (Size Digit 2)
CosmesistSize
tSide
t
Keel
tLength
t
Size Digit 2 t
Caucasian
35022cm
22Left
L
Keel 1 122-24cm
S22cm 2
Light Brown 35123cm
23Right
R
Keel 2 225-27cm
M23cm 3
Dark Brown
35324cm
24
Keel 3 328-30cm
L24cm 4
25cm
25
Keel 4 4 25cm 5
26cm
26 26cm6
27cm
27 27cm
7
28cm
28 28cm
8
29cm
29 29cm
9
30cm
30 30cm
0
SAC350-02LP Foot Ankle Cosmesis, Small (22-25cm)
SAC350-04
LP Foot Ankle Cosmesis, Large (26-30cm)
PROSTHETICS
692
Prosthetic Feet
PROSTHETICS
PROSTHETIC FEET: TRULIFE — Continued
a.
Seattle Triumph
Designed of carbon composite, the Seattle Triumph provides the dynamic performance that Trulife’s high
performance feet are known for while adding features to save the practitioner time and money. The Seattle
Triumph is recommended for medium to high activity levels. It combines a split keel and S-shaped shank to
create a multi-axial ankle foot system with vertical shock absorption, smooth rollover and controlled plantar
flexion. Complete with integrated heel wedge, titanium pyramid and Spectra sock, Seattle Triumph comes
preassembled in a removable foot shell, making it ready to fit directly out of the box. Free 60 day trial. Recommended for medium to high activity K3-K4 amputees with a maximum weight of 366 lb (136kg) for medium
activity level. 3/8” (9.5mm) heel rise. Product weight 493g at 25cm (without foot shell). 3 year warranty on
keel; 6 month warranty on foot shell. From Trulife.
Med-Low
Medium
Med-High
High
Definition
Limited
Walking
Walking on
Uneven Surface
Light
Sports
Running
Basketball
Keel 5
264-366 lb
(120-166kg)
226-366 lb
(103-166kg)
181-300 lb
(82-136kg)
131-220 lb
(59-99kg)
Keel 4
207-263 lb
151-225 lb
69-180 lb
<131 lb (94-119kg)
(68-102kg)
(31-81kg)
(<59kg)
Keel 3
118-206 lb
(53-93kg)
<151 lb
(<68kg)
<69 lb
(<31kg)
Keel 2
<118 lb
(<53kg)
Complete the item number below by choosing from options beneatht. (Example: STF19022L2S2)
Item No. ð
STF (Cosmesis) (Size) (Side) (Keel) (Length) (Size Digit 2)
PROSTHETICS
CosmesistSize
tSide
t
Keel
tLength
t
Size Digit 2 t
Caucasian
19022cm
22Left
L
Keel 1 122-24cm
S22cm
Light Brown 19123cm
23Right
R
Keel 2 225-27cm
M23cm
Dark Brown
19324cm
24
Keel 3 328-30cm
L24cm
25cm
25
Keel 4 4 25cm
26cm
26
Keel 5 5 26cm
27cm
27 27cm
28cm
28 28cm
29cm
29 29cm
30cm
30 30cm
2
3
4
5
6
7
8
9
0
PROSTHETICS
b.
Prosthetic Feet
693
Seattle Energy
Recommended for functional level K3, Seattle Energy features a dynamic toe and cushioned heel response,
full length, split composite keel for increased stability and removable, lifelike, sandal-toe foot shell. Preassembled with male pyramid for easy installation. Rated to 300 lb (136kg) for medium activity level. Product
weight 330g at 25cm (without foot shell). Minimum clearance 3.5” (9cm). 3/8” heel rise. 2 year warranty on
keel; 6 month warranty on foot shell. Foot bolt included. From Trulife.
Note: If the amputee has a long BK, carries heavy loads or will reach a higher activity level within a year,
choose the next category higher.
Category Selection Guide
Adjusted Patient Weight
221-300 lb 177-220 lb 133-176 lb
<132 lb
(101-136kg)
(81-100kg)
(61-80kg)
(<60kg)
Category 4321
Complete the item number below by choosing from options beneath t. (Example: SEF19022L1S2)
Item No. ð
SEF (Cosmesis) (Size) (Side) (Category) (Length) (Size Digit 2)
CosmesistSize
tSide
t
CategorytLength
t
Size Digit 2 t
Caucasian
19022cm22Left
L4 422-24cm
S22cm 2
Light Brown 19123cm23Right
R3 325-27cm
M23cm 3
Dark Brown 19324cm242 228-30cm
L24cm 4
25cm
251 1 25cm 5
26cm
2626cm6
27cm
2727cm
7
28cm
2828cm
8
29cm
2929cm9
30cm
3030cm
0
PROSTHETICS
694
Prosthetic Feet
PROSTHETICS
a.
Seattle Carbon LightFoot®
Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle Carbon LightFoot® provides excellent dynamic response and improved ML compliance. It features a split composite keel,
high quality cosmesis and is available 3/8” heel rise. Product weight 373g at 25cm. Rated to 275 lb (124kg)
for medium activity level. Available in sizes 22-29cm (Carbon LightFoot Ladies sizes 22-28cm). Minimum clearance: 1.5” (3.8cm) from keel top to cosmesis top. 2 year warranty on keel; 1 year warranty on foot shell. Foot
bolt included. From Trulife.
Low
Med-Low
Medium
Med-High
High
Keel N3
251-275 lb
(114-125kg)
211-275
(96-125kg)
176-270 lb
(80-122kg)
146-235 lb
(66-106kg)
126-200 lb
(57-90kg)
Keel N2
150-250 lb
(68-113kg)
120-210 lb
(54-95kg)
100-175 lb
(45-79kg)
85-145 lb
(38-65kg)
75-125 lb
(34-56kg)
Keel N1
<150 lb
(<68kg)
<120 lb
(<54kg)
<100
(<45kg)
<85
(<38kg)
<75
(<34kg)
Complete the item number below by choosing from options beneath t. (Example: SCF18526RN3)
Item No. ð
SCF (Type) (Cosmesis) (Size) (Side) (Keel)
Type
t
Cosmesis
tSize
tSide
t
Keel
t
Men’s
18Caucasian
522cm
22LeftL
Keel 1 N1
Ladies
19
Light Brown 623cm
23Right
R
Keel 2 N2
Dark Brown 824cm
24Keel 3
N3
25cm
25
26cm
26
27cm
27
28cm
28
29cm 129
1
Carbon LightFoot Ladies not available in 29cm.
PROSTHETICS
PROSTHETICS
b.
Prosthetic Feet
695
Seattle LightFoot2 with Titanium Pyramid
Recommended for functional level K2 or higher (HCFA approved for K3 or higher), The Seattle LightFoot2
with Titanium Pyramid arrives ready to install and features a natural looking, split-toe cosmesis. Rated to 300
lb (136kg) for medium activity level. 3/4” heel rise (SLF190, 191 and 193); 3/8” heel rise (SLF195, 196 and 198).
Minimum clearance: 3.5” (9cm). Product weight 480g at 25cm. 2 year warranty on keel; 1 year warranty on
foot shell. Foot Bolt, 2.5cm Foot Spacer and Foot Pyramid included. From Trulife.
Low
Med-Low
Medium
Med-High
High
Keel 9
256-300 lb
(116-136kg)
251-300 lb
(114-136kg)
201-235 lb
(91-106kg)
170-200 lb
(77-90kg)
Keel 8
191-255 lb
(87-115kg)
201-250 lb
(91-113kg)
161-200 lb
(73-90kg)
136-169 lb
(62-76kg)
Keel 7
271-300 lb
(123-136kg)
166-190 lb
(75-86kg)
151-200 lb
(69-90kg)
121-160 lb
(55-72kg)
101-135 lb
(46-61kg)
Keel 6
181-270 lb
(82-122kg)
131-165 lb
(59-74kg)
101-150 lb
(45-68kg)
81-120 lb
(36-54kg)
66-100 lb
(29-45kg)
Keel 5
<181 lb
(<82kg)
<131 lb
(<59kg)
<101 lb
(<45kg)
<81 lb
(<36kg)
<66 lb
(<29kg)
Complete the item number below by choosing from options beneatht. (Example: SLF19322LG5)
Item No. ð
SLF (Cosmesis) (Size) (Side) (Keel)
3/4“ Heel
Cosmesis
tSize
tSide
t
Keel
t
Caucasian 19022cm
22Left
L
Keel 5 G5
Light Brown 19123cm
23Right
R
Keel 6 G6
Dark Brown 19324cm
24Keel 7
G7
25cm 25Keel 8
G8
26cm 26Keel 9
G9
27cm 27
28cm 28
29cm29
30cm30
3/8“ Heel
Cosmesis
tSize
tSide
t
Keel
t
PROSTHETICS
Caucasian 19522cm
22Left
L
Keel 5 H5
Light Brown 19623cm
23Right
R
Keel 6 H6
Dark Brown 19824cm
24Keel 7
H7
25cm 25Keel 8
H8
26cm 26Keel 9
H9
27cm 27
28cm 28
29cm 29
696
Prosthetic Feet
PROSTHETICS
a.
Seattle LightFoot2
Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle LightFoot2 is
identical in appearance to the original Seattle LightFoot but features a modified Delrin® keel design which
provides enhanced rollover and durability. Appropriate for all lower extremity amputees, including Syme’s
with low to medium activity levels. Rated to 300 lb (136kg) for medium activity level. 3/4” heel rise (SLF160,
161 and 163); 3/8” heel rise (SLF165, 166 and 168). Minimum clearance: 1.5” (3.8cm) from keel top to cosmesis
top. Product weight 394g at 25cm. 2 year warranty on keel; 1 year warranty on foot shell. Foot bolt included.
From Trulife.
Med-Low
Medium
Med-High
High
Keel 9
Low
256-300 lb
(116-136kg)
251-300 lb
(114-136kg)
201-235 lb
(91-106kg)
170-200 lb
(77-90kg)
Keel 8
191-255 lb
(87-115kg)
201-250 lb
(91-113kg)
161-200 lb
(73-90kg)
136-169 lb
(62-76kg)
Keel 7
271-300 lb
(123-136kg)
166-190 lb
(75-86kg)
151-200 lb
(69-90kg)
121-160 lb
(55-72kg)
101-135 lb
(46-61kg)
Keel 6
181-270 lb
(82-122kg)
131-165 lb
(59-74kg)
101-150 lb
(45-68kg)
81-120 lb
(36-54kg)
66-100 lb
(29-45kg)
Keel 5
<181 lb
(<82kg)
<131 lb
(<59kg)
<101 lb
(<45kg)
<81 lb
(<36kg)
<66 lb
(<29kg)
Complete the item number below by choosing from options beneatht. (Example: SLF16527RH7)
Item No. ð
3/4“ Heel
Cosmesis
tSize
tSide
t
Keel
t
Caucasian 16022cm
22Left
L
Keel 5 G5
Light Brown 16123cm
23Right
R
Keel 6 G6
Dark Brown 16324cm
24Keel 7
G7
25cm 25Keel 8
G8
26cm 26Keel 9
G9
27cm 27
28cm 28
29cm29
30cm30
PROSTHETICS
3/8“ Heel
Cosmesis
tSize
tSide
t
Keel
t
Caucasian 16522cm
22Left
L
Keel 5 H5
Light Brown 16623cm
23Right
R
Keel 6 H6
Dark Brown 16824cm
24Keel 7
H7
25cm 25Keel 8
H8
26cm 26Keel 9
H9
27cm 27
28cm 28
29cm 29
PROSTHETICS
b.
Prosthetic Feet
697
Seattle LightFoot
Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle LightFoot is
appropriate for all lower extremity amputees, including Syme’s with low to medium activity levels. Rated to
300 lb (136kg) for medium activity level. 3/4” heel rise (SLF130, 139 and 141); 3/8” heel rise (SLF135, 136 and
138). Minimum clearance: 1.5” (3.8cm) from keel top to cosmesis top. Product weight 435g at 25cm. 2 year
warranty on keel; 1 year warranty on foot shell. Foot bolt included. From Trulife.
Low
Med-Low
Medium
Med-High
High
Keel 9
256-300 lb
(116-136kg)
251-300 lb
(114-13 kg)
201-235 lb
(91-106kg)
170-200 lb
(77-90kg)
Keel 8
191-255 lb
(87-115kg)
201-250 lb
(91-113kg)
161-200 lb
(73-90kg)
136-169 lb
(62-76kg)
Keel 7
271-300 lb
(123-136kg)
166-190 lb
(75-86kg)
151-200 lb
(69-90kg)
121-160 lb
(55-72kg)
101-135 lb
(46-61kg)
Keel 6
181-270 lb
(82-122kg)
131-165 lb
(59-74kg)
101-150 lb
(45-68kg)
81-120 lb
(36-54kg)
66-100 lb
(29-45kg)
Keel 5
<181 lb
(<82kg)
<131 lb
(<59kg)
<101 lb
(<45kg)
<81 lb
(<36kg)
<66 lb
(<29kg)
Complete the item number below by choosing from options beneatht. (Example: SLF13527LF7)
Item No. ð
3/4“ Heel
Cosmesis
Keel
t
Caucasian 13022cm
22Left
L
Light Brown 13923cm
23Right
R
Dark Brown 14124cm
24
25cm 25
26cm 26
27cm 27
28cm 28
29cm29
30cm30
Keel 5
Keel 6
Keel 7
Keel 8
Keel 9
F5
F6
F7
F8
F9
3/8“ Heel
Keel
t
Keel 5
Keel 6
Keel 7
Keel 8
Keel 9
F5
F6
F7
F8
F9
Cosmesis
tSize
tSide
t
tSize
tSide
t
PROSTHETICS
Caucasian 13522cm
22Left
L
Light Brown 13623cm
23Right
R
Dark Brown 13824cm
24
25cm 25
26cm 26
27cm 27
28cm 28
29cm 29
698
Prosthetic Feet
PROSTHETICS
a.
Seattle Lifecast
Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle Lifecast was
the first energy storing, dynamic response foot with the “J” keel design. It features an advanced life-like
cosmesis developed from molds of real feet. 3/4” heel rise. Product weight 532g at 25cm. Minimum clearance
is 3-3/16” (8.1cm) for sizes 22-26cm and 3-3/8” (8.6cm) for sizes 27-29cm. Rated to 252 lb (114kg) for medium
activity level. 2 year warranty on keel; 1 year warranty on foot shell. Foot bolt included. From Trulife.
Suggested Keel Selection Guide Foot Size
22cm
23-26cm
27-29cm
Keel A0S
95-110 lb (43.1-49.9kg)
Keel A1S
111-130 lb (50.0-59.0kg)
Keel A2S
131-150 lb (59.1-68.1kg)
Keel A3S
125-154 lb (56.8-69.9kg)
Keel A4S
155-185 lb (70.0-84.0kg)
Keel A5S
186-220 lb (84.1-99.9kg)
Keel A6S
221-252 lb (100-114.4kg)
Keel A3L
125-150 lb (56.8-68.1kg)
Keel A4L
151-180 lb (68.2-81.7kg)
Keel A5L
181-205 lb (81.8-93.1kg)
Keel A6L
206-245 lb (93.2-111.2kg)
Complete the item number below by choosing from options beneath t. (Example: SFH11027RA4L)
Item No. ð
SFH (Cosmesis) (Size) (Side) (Keel)
Cosmesis
tSize
tSide
t
Keel
t
Caucasian
11022cm
22Left
L
Keel A0S A0S
Light Brown 11123cm
23Right
R
Keel A1S 1 A1S
Dark Brown 11324cm
24
Keel A2S 1 A2S
25cm
25
Keel A3S 2 A3S
26cm
26
Keel A4S 2 A4S
27cm
27 Keel A5S 2A5S
28cm
28 Keel A6S 2A6S
29cm 29
Keel A3L 3 A3L
Keel A4L 3 A4L
Keel A5L 3 A5L
Keel A6L 3 A6L
PROSTHETICS
1
1
Size 22cm only. 2 Sizes 23-26cm. 3 Sizes 27-29cm.
If your patient’s weight exceeds the limits of the chart, please call Trulife for assistance.
PROSTHETICS
b.
Prosthetic Feet
699
Seattle Kinetic™
Designed for moderate K2 ambulators, the Kinetic Foot System features an integrated multi-axial ankle,
full length flexible keel, excellent ML compliance and plantar flexion and split toe cosmesis. System includes
integrated female proximal adapter for ease of adjustment and pylon with bonded pyramid adapter. Rated
to 300 lb (136kg) for medium activity level. 3/8” (9.5cm) heel rise. Minimum clearance is 28” (7cm). Product
weight 495 at 25cm. From Trulife.
Suggested Bumper Selection Guide by Patient Weight
Foot Size
22cm
23cm
24cm
25cm
26cm
27cm
28cm
29cm
30cm
220-300 lb (100-136kg)334444444
177-220 lb (81-99kg) 223333333
132-176 lb (60-8-kg) 112222222
<132 lb (<60kg) 111111111
Complete the item number below by choosing from options beneath t. (Example: SKF20026R2)
Item No. ð
SKF (Cosmesis) (Size) (Side) (Bumper)
Cosmesis
tSize
tSide
t
Bumper t
Caucasian
20022cm
22Left
L1
Light Brown 20123cm
23Right
R2
Dark Brown 20324cm
243
25cm
254
26cm
26
27cm
27
28cm
28
29cm
29
30cm
30
1
2
3
4
PROSTHETICS
700
Prosthetic Feet
PROSTHETICS
a.
Seattle Ladies’ Foot
Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle Ladies’ Foot is
a sculpted model of the Seattle Lifecast. It has a slim design and low profile, offering a better fit in women’s
and other narrower shoe styles. 3/8” heel rise. Minimum clearance is 3” (7.6cm). Rated to 245 lb (111kg) for
medium activity level. Product weight 538g at 25cm. 2 year warranty on keel; 1 year warranty on foot shell.
Foot bolt included. From Trulife.
Suggested Keel Selection Guide <115 lb
(<52kg)
22-24cm
Keel B2S
Keel B3S
Keel B4S
Keel B5S
Keel B6S
25-28cm
Keel B2L
Keel B3L
Keel B4L
Keel B5L
Keel B6L
115-135 lb
(52-61kg)
136-165 lb
(62-74kg)
166-195 lb
(75-89kg)
196-245 lb (89-111kg)
Complete the item number below by choosing from options beneath t. (Example: SFH12024LB5S)
Item No. ð
SFH (Cosmesis) (Size) (Side) (Keel)
Cosmesis
tSize
tSide
t
Keel
t
Caucasian
12022cm
22Left
L
Keel B2S1 B2S
Light Brown 12123cm
23Right
RKeel B2S1 B3S
Dark Brown 12324cm
24Keel B2S1 B4S
25cm
25Keel B2S1 B5S
26cm
26Keel B2S1 B6S
27cm
27 Keel B2S2B2L
28cm
28 Keel B2S2B3L
Keel B2S2B4L
Keel B2S2B5L
Keel B2S2B6L
1
Sizes 22-24cm. 2 Sizes 25-28cm.
PROSTHETICS
If your patient’s weight exceeds the limits of the chart, please call Trulife for assistance.
PROSTHETICS
b.
Prosthetic Feet
701
Seattle Natural Foot®
Recommended for functional level K1-K2, The Seattle Natural Foot® has the performance characteristics of a
compliant foot with the traditional LightFoot cosmesis and features a lightweight Delrin® keel. 3/8” heel rise.
Product weight 488g at 25cm. Minimum clearance is 3” (7.6cm). Rated to 225 lb (102kg) for medium activity
level. 2 year warranty on keel; 1 year warranty on foot shell. Foot bolt included. From Trulife.
Foot Size Guide
22cm
23cm
24cm
25cm
26cm
27cm
28cm
29cm
Length
8-5/8”
9”
9-3/8”
9-3/4” 10-3/16” 10-9-1/6”
11”
11-3/8”
(21.9cm) (22.9cm) (23.8cm) (24.8cm) (25.9cm) (26.8cm) (27.9cm) (28.9cm)
Width
3-5/32” 3-1/4” 3-5/16” 3-3/8”
3-1/2” 3-9/16” 3-19/32” 3-21/32”
(8cm) (8.2cm)(8.4cm)(8.6cm)(8.8cm) (9cm) (9.1cm) (9.3cm)
Complete the item number below by choosing from options beneath t. (Example: SNF15027RM)
Item No. ð
SNF (Cosmesis) (Size) (Side) (Keel)
Cosmesis
tSize
tSide
t
Keel
t
Caucasian
15022cm
22Left
LSoft
S
Light Brown 15123cm
23Right
RMedium
M
Dark Brown 15324cm
24 Firm F
25cm
25
26cm
26
27cm
27
28cm
28
29cm29
30cm30
c.
Seattle SACH Foot
Recommended for functional level K1, the Seattle SACH Foot was designed to provide amputees with more
function and comfort than the standard SACH. It features a molded keel with a rocker bottom to allow for
easy rollover, and the LightFoot cosmesis. Available with 3/8” and 3/4” heel rise. Product weight 448g at
25cm. Rated to 225 lb (102kg) for medium activity level. 2 year warranty on keel; 1 year warranty on foot
shell. Foot bolt included. From Trulife.
Complete the item number below by choosing from options beneath t. (Example: SCH10027RM)
Item No. ð
SCH (Cosmesis) (Size) (Side) (Keel)
3/8” Heel
Cosmesis
tSize
tSide
t
Keel
t
3/4” Heel
Cosmesis
tSize
tSide
t
Keel
t
Caucasian 10522cm
22Left
LSoftS
Light Brown 10623cm
23Right
RMedium
M
Dark Brown 10824cm
24 Firm F
25cm 25
26cm 26
27cm 27
28cm 28
29cm29
30cm30
PROSTHETICS
Caucasian 10022cm
22Left
LSoftS
Light Brown 10123cm
23Right
RMedium
M
Dark Brown 10324cm
24 Firm F
25cm 25
26cm 26
27cm 27
28cm 28
29cm29
702
Prosthetic Feet
PROSTHETICS
PROSTHETIC FEET: WILLOWWOOD
a.
Carbon Copy 2
Designed for levels K3 and K4, the Carbon Copy 2 foot incorporates a Kevlar ®/nylon keel for increased
durability and longevity. Its dual spring design provides a smooth transition from heel to toe, allowing for
additional stability and added patient confidence. Product weight at 26cm without pyramid: 588g (men’s),
520g (women’s). Rated to 250 lb (113kg). One year warranty. Sold each. From WillowWood.
Toe Resistance Guide
Foot Size
Very Low
Low
Regular
22-27cm Women’s
<110 lb
111-150 lb
151-200 lb
23-25cm Men’s
<120 lb
121-160 lb
161-230 lb
26-31cm Men’s
<130 lb
131-170 lb
171-250 lb
Very Very Low and High toe resistance available by special order.
Complete the item number below by choosing from options beneath t. (Example: CC2M-26LB-2L-M)
Item No. ð
CC (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Density)
Type
tSize
tSide
tColor t
Toe Res
tHeight
tDensity
t
Men’s 2M22cm2 22Left
LBuff B
Very Low 23/8”
LSoft S
Women’s 2W23cm
23Right
R
Med Brn MLow 33/4”2 MMedium
M
24cm 24 Tan TRegular
4 Firm F
25cm 25
26cm 26
27cm 27
28cm2 28
29cm2 29
30cm2 30
31cm2 31
2
b.
Men’s only. 3 Women’s only.
Earthwalk™ 2 Foot and Ankle Kit
PROSTHETICS
Designed for levels K1 and K2, the Earthwalk™ 2 system provides natural freedom of mobility with its flexible keel and smooth motioned ankle. The “late stop” ankle feature allows for easy roll over so the foot can
maintain foot flat longer. This action is important for less active amputees who require more stability and less
dynamic response. Lightweight, durable and virtually maintenance-free. Three heel density inserts included.
Rated to 250 lb (113kg). One year warranty. From WillowWood.
Toe Resistance/Ankle Selection Guide
Toe Resistance
Very Low
Low
Regular Very High
<150 lb
151-175 lb
176-220 lb
221-250 lb
Ankle
Red
Blue
Yellow
Green
Complete the item number below by choosing from options beneath t. (Example: EWF2W-26LM-3H-Y)
Item No. ð
EWF2 (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Ankle)
Type
tSizetSide
tColor t
Toe Res
tHeight
tAnkle
t
Men’s M22cm3 22Left
LBuff B
Very Low 13/8”LRedR
Women’sW23cm
23Right
R
Med Brn MLow 23/4”2
MBlue B
24cm 24 Tan TRegular
31-1/8”3 HYellow
Y
25cm 25 HIgh 4 Green
G
26cm 26
27cm 27
28cm2 28
29cm2 29
30cm2 30
31cm2 31
2
PROSTHETICS
c.
Prosthetic Feet
703
DuraLite™ Foot
Designed for level K3, the DuraLite™ Foot is a lightweight foot with high energy return and offers easy
field-height adjustability. The foot incorporates a urethane toe pad which enhances medial and lateral motion. The split heel conforms to the floor and provides stability on uneven terrain. Mounted immediately
beneath the proximal adapter, the Stair Guard helps to reduce the risk of the shin adapter catching on a step
when descending stairs. Includes choice of pyramid adapter or pyramid receiver proximally. Three heel spring
wedges included with each foot. Rated to 300 lb (135kg) depending on foot size and activity level. Product
weight at 26cm: 356g (without proximal adapter, foot shell or Spectra sock). 3 year warranty on foot, 9 month
warranty on foot shell. Sold Each. From WillowWood.
Weight3
100-120 lb
(45-54kg)
121-150 lb
(55-68kg)
151-190 lb
(69-86kg)
191-230 lb
(87-104kg)
231-270 lb
(105-122kg)
271-300 lb
(123-135kg)
Activity Lev MedHighLow MedHighLow MedHighLow MedHighLow MedHighLow Med
Foot Size
23-24cm
12123234345 - - - - -
25-26cm
1212323434545 - - -
27-31cm
1212323434545656
3
Complete the item number below by choosing from options beneath t. (Example: DLF-23LB-4L-1)
Item No. ð
DLF - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Prox Adapter)
Size
tSide
tColort
Toe Res tHeight
t
23cm
23LeftLBuff B1
24cm
24Right
R
Med Brn1 M2
25cm
25
Tan1
T3
26cm
26
4
27cm
27 5
28cm
28
6
29cm
29
30cm
30
31cm
31
Proximal Adapt t
13/8”
LPyramid
23/4”
M
Pyramid Rec
3
4
5
6
1
1
2
Medium Brown and Tan by special order only.
PROSTHETICS
704
Prosthetic Feet
PROSTHETICS
PROSTHETIC FEET: WILLOWWOOD — Continued
a.
Fusion™ Foot
The unique design of WillowWood’s Fusion™ Foot allows the carbon fiber shank, heel and foot plate to work
together through each step rather than independently. As a result, the Fusion™ Foot delivers vertical shock
absorption, smooth heel-to-toe transition, inversion/eversion, and strong energy return all in one mechanism.
The foot comes standard with two interchangeable heel wedges that may be quickly and easily changed
during an office visit. The shank of the Fusion™ Foot may be trimmed to suit the patient’s limb length and
requires no drilling of holes. Available with choice of proximal adapter. One year warranty on foot; 9 month
warranty on foot shell. Sold each. From WillowWood.
Specifications
Product Weight2: 360g
Product Height
Max: 13.4” for 3/8” Heel
Min: 6.6” for 3/8” Heel
Min” 6.2” for 3/4” Heel
2
Available Sizes: 23-31cm
Heel Height: 3/8” or 3/4”
1
Manufacturer suggested.
26cm, toe resistance 3, no footshell or adapter.
Weight3
100-120 lb
(45-54kg)
121-150 lb
(55-68kg)
151-190 lb
(69-86kg)
191-230 lb
(87-104kg)
231-270 lb
(105-122kg)
271-300 lb
(123-135kg)
Activity Lev MedHighLow MedHighLow MedHighLow MedHighLow MedHighLow Med
Foot Size
23cm-24cm12123234345 - - - - -
25cm-26cm1212323434545 - - -
27cm-31cm1212323434545656
3
Complete the item number below by choosing from options beneath t. (Example: CC2M-26LB-2L-M)
Item No. ð
FFT - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Prox Adapter)
PROSTHETICS
Size
tSide
tColort
Toe Res tHeight
t
23cm
23Left
LBuff B1
24cm
24Right
R
Med Brn4 M2
25cm
25 Tan4
T3
26cm
26
4
27cm
27 5
28cm
28
6
29cm
29
30cm
30
31cm
31
4
Proximal Adapt t
13/8”
LPyramid
23/4”
M
Pyramid Rec
3
4
5
6
1
2
FFA-1001
Fusion Heel Adjustment Wedges, 23-26cm
FFA-1002 Fusion Heel Adjustment Wedges, 27-28cm
FFA-1003 Fusion Heel Adjustment Wedges, 29-31cm
FFA-1004 Fusion Replacement Bumpers and Snubbers
PROSTHETICS
b.
Prosthetic Feet
705
Impulse™ Foot
WillowWood calls the Impulse™ Foot the “high-tech solution at a value price”. The foot features a highperformance composite foot plate attached to a Kevlar ®/nylon keel which provides excellent flexibility and
high energy return. Three heel density inserts included with each foot. With its recessed keel, this foot can
be used for endoskeletal or exoskeletal applications. Rated to 350 lb (159kg). Product weight at 26cm: 453g
(men’s), 400g (women’s). One year warranty. Sold each. From WilloWood. See page 672 for Impulse™ Ankle.
Very Very Low Very Low
<110 lb
(<49kg)
Low
Regular
High
HD 1
HD 2
111-150 lb 151-190 lb 191-230 lb 231-270 lb 271-310 lb 311-350 lb
(50-68kg) (69-86kg) (87-104kg) (105-122kg) (123-140kg) (141-159kg)
Complete the item number below by choosing from options beneath t. (Example: IMPW-26LM-3H)
Item No. ð
IMP (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height)
Toe Resistance
tHeight
t
Men’s M22cm3 22Left
LBuff B
Very Very Low
Women’s
W23cm
23Right
R
Med Brn M
Very Low
24cm
24 Tan TLow
25cm25
Regular
26cm26
High
27cm27
Heavy-Duty 1
28cm2 28
Heavy-Duty 2
29cm2 29
30cm2 30
31cm2 31
Type
13/8”L
23/4”2
M
31-1/8”3 H
4
5
6
7
tSize
tSide
tColor t
2LTC-1210Impulse® Pyramid Spacer Block
2
c.
Magnum Heavy-Duty Foot
Foot for amputees weighing up to 350 lb (159kg). Durable and reliable, while providing excellent response.
Lightweight, slim design with lifelike cosmesis. Rated to 350 lb (159kg) for levels K1-K3; 300 lb (137kg) for K4.
Clearance: 3.5” (8.89cm) foot only; 8” (20.32cm) complete system. One year warranty. From WillowWood.
Low
Regular
High
251-275 lb
276-300 lb
301-350 lb
(114-124kg)
(125-136kg)
(137-159kg)
PROSTHETICS
Complete the item number below by choosing from options beneath t. (Example: MHDM-26LM-6L)
Item No. ð
MHD (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height)
Type
tSizetSide
tColort
Toe Res
tHeight
t
Men’s
M22cm3 22Left
LBuffBLow63/8”
L
Women’s
W23cm
23Right
R
Med Brn MRegular
73/4”2
M
24cm
24 Tan THigh
8
25cm
25
26cm
26
27cm
27
28cm2 28
29cm2 29
30cm2 30
31cm2 31
2
706
Prosthetic Feet
PROSTHETICS
a.
Pathfinder® II
Designed for levels K3 and K4, the Pathfinder® II combines a toe spring, foot plate and a pneumatic heel
spring into a triangular configuration. This design provides shock absorption during heel strike without
diminishing the energy return of the toe spring, resulting in optimal flexibility, stability and comfort. An
improved bearing system at the proximal and distal ends of the heel spring alleviates medial/lateral loading
on the pneumatic cylinder and allows increased inversion/eversion in the foot. The Pathfinder® II Low profile
(pictured) is 1” shorter in overall height. Kit includes foot, foot shell, Spectra sock, hand pump, removal tool,
valve extension and choice of one proximal adapter. Rated to 350 lb (159kg) for K1-K3 and 300 lb (135kg) for
K4. Product weight at 26cm: 785g (without slide adjustment), 817g (with slide adjustment). 36 month warranty on foot, 9 month warranty on foot shell.
3456784
94
100-135 lb 136-170 lb 171-205 lb 206-235 lb 236-280 lb 281-315 lb 316-350 lb
(45-61kg) (62-77kg) (78-93kg) (94-106kg) (107-127kg)(128-143kg)(144-160kg)
Clearance*
Standard
Standard
Low-Profile
Low-Profile
Heel Height
3/4” (18mm) 3/8” (10mm) 3/4” (18mm) 3/8” (10mm)
Pathfinder II with Slide Adjustment
(1) w/Pyramid Adapter
9.5” (24.1cm) 9.8” (24.9cm) 8.5” (21.6cm) 8.8” (22.4cm)
(2) w/Pyramid Receiver Adapter
9.2” (23.4cm) 9.5” (24.1cm) 8.2” (20.8cm) 8.5” (21.6cm)
(3) w/Threaded 4-Hole Adapter
8.7” (22.1cm)
9.1” (23.1cm) 7.7” (19.6cm)
8.1” (20.6cm)
(4) w/Through-Hole Adapter w/Valve
8.7” (22.1cm)
9.1” (23.1cm) 7.7” (19.6cm)
8.1” (20.6cm)
Pathfinder II without Slide Adjustment
(5) w/Fixed Threaded 4-Hole Adapter
8.3” (21.1cm) 8.7” (22.1cm) 7.3” (18.5cm)
7.7” (19.6cm)
*From bottom of heel to top of proximal adapter.
Complete the item number below by choosing from options beneath t. (Example: PFLP-23LB-4L-1)
Item No. ð
PF (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Prox Adapter)
PROSTHETICS
Type
tSize
tSide
tColor t
Toe Res tHeight
t
Regular DR23cm
23Left
LBuff B3
Low Pro LP24cm
24Right
R
Med Brn1 M4
25cm 25 Tan1 T5
26cm 26 6
27cm 27 7
28cm 28 8 4
29cm 29 9 4
30cm 30
31cm 31
4
Prox Adapt
t
33/8”LPyramid 1
43/4”M Pyramid Rec 2
5
Threaded 4H 3
6
4Hole w/Valve 4
7
Fixed 4Hole
5
8
9
1
Toe springs 8 and 9 are not available in sizes 23 and 24cm.
PFD-0113
Pathfinder II Threaded 4-Hole Adapter
PFD-0114 Pathfinder II Through 4-H Adapt w/Valve
PFD-0115 Pathfinder II Pyramid Adapter
PFD-0116 Pathfinder II Pyramid Receiver Adapter
PFD-1101 Pathfinder II Pneumatic Unit w/Bearing Kit
PFD-1103 Pathfinder II Heel Spring Bearing Kit
PFD-1108 Pathfinder Foot Shock
PFD-1109 Pathfinder II Pneumatic Heel Spring
PFD-1201 Pathfinder II Hand Pump for Pneumatic Spring
PFD-9001 Pathfinder II Transfer Block
PROSTHETICS
b.
Prosthetic Feet
707
Single Axis Foot
Designed for low activity levels K1 and K2, this strong, inexpensive foot is 10-20% lighter in weight than conventional single axis feet. Features a molded-in titanium pyramid, a unisex, lifelike, water-resistant cosmesis
and interchangeable anterior and posterior bumpers in three durometers. Product weight 560g at 26cm.
Toe Resistance
Low
Regular
High
Patient Weight
<130 lb
131-180 lb
181-250 lb
(<59kg)
(60-81kg)
(82-113kg)
Bumper Selection Guide
AnteriorAnteriorAnteriorPosteriorPosteriorPosterior
Foot Size
Soft
Medium
Firm
Soft
Medium
Firm
22-23cm
<120 lb
(<55kg)
120-250 lb
(55-113kg)
N/A
N/A
<165 lb
(<75kg)
166-250 lb
(76-113kg)
N/A
N/A
24-25cm
N/A
<250 lb
N/A
<175 lb
176-250 lb
N/A
N/A(<113kg)N/A (<79kg)
(80-113kg)N/A
26-27cm
N/A
N/A
<185 lb
(<84kg)
186-250 lb
(85-113kg)
N/A
N/A
<195 lb
(<89kg)
196-250 lb
(90-113kg)
28-29cm
N/A
N/A
<195 lb
(<89kg)
196-250 lb
(90-113kg)
N/A
N/A
<195 lb
(<89kg)
196-250 lb
(90-113kg)
30-31cm
N/A
N/A
<160 lb
(<73kg)
161-250 lb
(73-113kg)
N/A
N/A
<160 lb
(<73kg)
161-250 lb
(73-113kg)
Complete the item number below by choosing from options beneath t. (Example: SAA-26LB-2L-MM)
Item No. ð SAA - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Ant Bumper) (Pos Bumper)
Size
tSide
tColor t
Toe Res
22cm
23cm
24cm
25cm
26cm
27cm
28cm
29cm
30cm
31cm
22LeftLBuff BLow23/8”
LSoft
SSoft
S
23Right
R
Med Brn MRegular
33/4”
MMed
MMed
M
24 Tan THigh4 Firm
FFirm
F
25
26
27
28
29
30
31
tHeight
tAnt
tPost
t
PROSTHETICS
SAF-00100Single Axis Ankle, Endoskeletal
SAF-00130
Single Axis Ankle Anterior/Posterior Bumpers, 6/Set
SAF-00132
Single Axis Ankle Anterior Deflect Bumper, Medium
SAF-00134
Single Axis Ankle Anterior Deflect Bumper, Firm
SAF-00140
Single Axis Ankle Posterior Deflect Bumper, Soft
SAF-00142
Single Axis Ankle Posterior Deflec Bumper, Medium
SAF-00144
Single Axis Ankle Posterior Deflec Bumper, Firm
708
Prosthetic Feet
PROSTHETICS
a.
SACH Foot
With lightweight construction, attractive cosmesis and low price, the WillowWood SACH foot is an affordable
choice for levels K1 and K2. Three heel density inserts included with each foot. Available with or without
titanium pyramid. Product weight 491g at 26cm. Rated to 250 lb (113kg). One year warranty.
Toe Resistance
Low
Regular
High
<130 lb
131-180 lb
181-250 lb
(<59kg)
(60-81kg)
(82-113kg)
Complete the item number below by choosing from options beneath t. (Example: SFT-22RB-3M)
Item No. ð
SF (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height)
Type
tSize
tSide
tColort
Toe Res
tHeight
t
W/O Pyramid T22cm
22LeftLBuff BLow23/8”L
With Pyramid P23cm
23Right
R
Med Brn MRegular
33/4”M
24cm
24 Tan THigh4
25cm
25
26cm
26
27cm
27
28cm
28
29cm
29
30cm
30
31cm
31
ACCESSORY FEET
b.
Trowbridge Terra-Round Foot
The Trowbridge Terra-Round accessory foot mounts directly inside a standard 30 mm pylon. The center stem
flexes allowing the unit to conform to uneven terrain. It is also useful in the lab when fitting the prototype
limb. The water-resistant unit has a traction base pad. From Ferrier Coupler Inc.
PROSTHETICS
Item No. ð
T5
T801
StemT806Upper O-Rings (2)
T802
Center PlateT807Lower O-Ring
T803 Body
T804
Standard Crepe and Vibram Sole
T810 Base Plate
c.
KISS® Trainers™
Dynamic flexible keel stubby feet. Sold pair. From KISS®.
Item No. ð
CMP27/A
PROSTHETICS
709
SUSPENSION BELTS
d.
Knit-Rite Power Belt Auxiliary Suspension Belt™
Breathable and durable nylon/Lycra® squeezes prosthesis to the body from all directions. Low profile and
comfortable. This item is available in four styles. Original Power Belt (928), Gunslinger Waist (977) with bias
cut waistband for reduced roll-over, Bilateral Power Belt (956) and Adjustable Leg (991) with longer leg
length to allow for adjustable leg closure. Sold each. Note: Gunslinger style is universal.
Size
X-Small
Small
Medium
Large
X-Large
XX-Large
Fits Waist
21-28”
23-30”
30-42”
34-46”
38-52”
42-56”
Fits Leg
12-15”
15-20”
17-23”
19-25”
20-28”
22-30”+
Style
Size
X-Small
Original w/Hand Loop
Left
Gunslinger
Right
Bilateral
Universal
Adjustable Waist/Leg
Left
Right
3L928LXS 3L928RXS3L977UXS3L956BXS3L991LXS 3L991RXS
Small
3L928LSM 3L928RSM3L977USM3L956BSM3L991LSM 3L991RSM
Medium
3L928LMD 3L928RMD3L977UMD3L956BMD3L991LMD 3L991RMD
Large
3L928LLG 3L928RLG3L977ULG3L956BLG3L991LLG 3L991RLG
X-Large
3L928LXL 3L928RXL3L977UXL3L956BXL3L991LXL 3L991RXL
XX-Large
3L928L2X3L928R2X3L977U2XN/A
N/A
N/A
3L914E12
e.
Knit-Rite Power Belt Extender (for sizes medium and up)
Knit-Rite Power Short Auxiliary Suspension Belt™
The Power Short Auxiliary Suspension Belt® option, with continuous waist configuration, eliminates the bulk
of Velcro® closures for the cosmetic appeal and comfort preferred by some patients. The improved design of
the adjustable leg version allows the leg to be more fully opened, eliminating donning limitations with the
previous design. The non-stretch Velcro® leg closure with this option allows a custom purchase of the socket
taper. The longer leg section provides greater socket containment. Sold each. From Knit-RIte.
Size
X-Small
Small
Medium
Large
X-Large
Fits Waist
28-36”
30-38”
32-40”
34-42”
36-44”
Fits Leg
12-15”
15-20”
17-23”
19-25”
20-28”
Original Style
Item No. ð3L911CLXS
3L911CSM
3L911CMD
3L911CLG3L911CXL
Item No. ð3P911ALXS
3P911ASM
3P911AMD
3P911ALG3P911AXL
PROSTHETICS
Adjustable Leg Style
f.
CoolFlex AK Suspension Belt
Sold each. From Knit-Rite.
Size
Small
Medium
Large
Item No. ð
3LCFAKSM3LCFAKMD 3LCFAKLG
710
Lower ExtremitySuspension
P r os t h e t ics
SUSPENSION BELTS — Continued
a.
Total Elastic Suspension (TES) Belt™
The Original TES Belt™ features a wide 360° textured grip cuff and modified adductor panel for improved
lateral gripping. It evens out stress and eliminates the pull-down feeling of old girdle style belts. Two types
to choose from: Standard or Bilateral with two legs; and two styles: Regular—with solid sides, or Cut Away
at side hip area. Sold each. From Syncor. See page 545 for pediatric sizes.
Size
X-Small
Small
Medium
Large
X-Large
XX-Large
Waist*
27-32”
33-41”
37-48”
42-53”
48-59”
56-65”
Cuff*
13-17”
16-20”
19-23”
22-27”
26-32”
31-36”
Regular Style
Left
TES-000-LN TES-100-LN TES-200-LN TES-300-LNTES-400-LN TES-500-LN
Right
TES-000-RN TES-100-RN TES-200-RN TES-300-RNTES-400-RN TES-500-RN
Bilateral
TES-000-BN TES-100-BN TES-200-BN TES-300-BNTES-400-BN TES-500-BN
With Cut Away
Left
TES-000-LC TES-100-LC TES-200-LC TES-300-LCTES-400-LC TES-500-LC
Right
TES-000-RC TES-100-RC TES-200-RC TES-300-RCTES-400-RC TES-500-RC
Bilateral
TES-000-BC TES-100-BC TES-200-BC TES-300-BCTES-400-BC TES-500-BC
Extension
TES-EXT-XS
TES-EXT-S
TES-EXT-M
TES-EXT-L
TES-EXT-XL
TES-EXT-2X
*Circumference.
b.
ProActive Wear Suspension Belt
Designed to provide the transfemoral amputee optimal comfort, suspension and rotational control. Ideal
form of primary suspension, ancillary rotational control for lanyard and liner wearers. Manufactured from
latex-free soft-grip neoprene against the skin with durable nylon outer layer and heavy-duty 2” nylon straps
with contact closure.
Size
24”
26”
28”
30”
Item No. ð
89-1450-000 89-1451-00089-1452-000 89-1453-000
Size
32”
34”
36”
38”
Item No. ð
89-1454-000 89-1455-00089-1456-000 89-1457-000
PROSTHETICS
c.
Flo-Tech® Waist Belt
Available for transfemoral or transtibial. Sold each. From Flo-Tech.
Transfemoral
Left
Right
Small
TFWBLSTFWBRS
Medium
TFWBLMTFWBRM
Large
TFWBLLTFWBRL
Transtibial
Left
Right
Item No. ð
TTWBLTTWBR
PROSTHETICS
d.
711
Transtibial Waist Belt
Adjustable from 30-44”. Sold each. From Fillauer.
Side
Left
Right
Item No. ð
129155129148
e.
Silesian Belt Kit
Two styles. Sold each. From Fillauer.
Description
Item No.ò
Universal (Includes hook and loop and chafes) (pictured)
129125
Reversible (Includes webbing belt w/chafe and D-ring, strap buckle, plate and screws)
129130
f.
Adjustable BK Belt
Description
Left
Right
Item No. ð
3LBK20LF3LBK20RT
g.
Knit-Rite BK Suspension Belt
44”. Sold each. From Knit-Rite.
Item No. ð
3M2KSBLF3M2KSBRT
h.
PROSTHETICS
Description
Left
Right
Post-Op BK Suspension Belt
Prosthetic webbing with elastic suspension. Cast attachment strap with buckle. One size fits up to 44”. Sold
each. From Trulife.
Side
Left
Right
Item No. ð
919050D919051D
712
P r os t h e t ics
SUSPENSION BELTS — Continued
a.
BK Waist Belt
2” (5cm) white cotton, lined with 1/8” (0.3) white felt. 2” (5cm) gray elastic suspension strap with 1” (2.5cm)
buckle. 43” (109cm) length. Includes detached Dacron®-reinforced leather waist billet. Sold each. From Trulife.
Side
Left
Right
Item No. ð
9208D9209D
STRAPS
b.
BK Suspension Strap
Adjustable strap secures prosthesis without wide joints and thick corsets. Top grade leather reinforced with
Dacron® tape. Includes buckle. Sold each. From Hosmer.
Side
Left
Right
Item No. ð
5147751806
c.
PTB Strap 920
Buckle closure with Dacron® reinforcement. Sold each. From Trulife.
PROSTHETICS
Side
Left
Right
Smoked Elk, 18” (46cm)
209LL1-8SE-0920209LR1-8SE-0920
209LL2-1SE-0920209LR2-1SE-0920
d.
PTB Strap 920A
Hook and loop closure with Dacron® reinforcement. Sold each. From Trulife.
Side
Left
Right
209LL1-8SE-920A209LR1-8SE-920A
209LL2-1SE-920A209LR2-1SE-920A
Embossed Elk, 21” (53cm)
209LL2-1EE-920A209LR2-1EE-920A
PROSTHETICS
e.
713
PTB Strap 923
Elastic center and buckle closure. Sold each. From Trulife.
Side
Left
Right
209LL1-8SE-0923209LR1-8SE-0923
209LL2-1SE-0923209LR2-1SE-0923
Embossed Elk, 21” (53cm)
209LL2-1EE-0923209LR2-1EE-0923
f.
PTB Strap 923A
Elastic center and hook and loop closure. Smoked elk. Sold each. From Trulife.
Side
Left
Right
46cm (18”)
209LL1-8SE-923A209LR1-8SE-923A
53cm (21”)
209LL2-1SE-923A209LR2-1SE-923A
g.
PTB Strap, Universal
A comfortable suspension strap with elastic center that can be converted to left or right. Includes fasteners
and leather fork strap for auxiliary belt suspension. Assembly required. Sold each. From Trulife.
Style
Item No.ò
Hook and Loop Closure
209L00-SE9-19AF
Buckle Closure
209L00-0SE-919F
h.
PTB Strap with Elastic Center
A comfortable suspension strap with elastic center. Universal side and size. Available with hook and loop or
buckle closure. Assembly required. Sold each. From Trulife.
Item No.ò
Hook and Loop Closure
209L00-0SE-919A
Buckle Closure
209L00-00S-E919
PROSTHETICS
Style
i.
Leather Billet
9-10 oz russet leather. Sold each. From Trulife.
Description
Item No.ò
3/4” (2cm) Width, 11” (28cm) Length
209LRU911
1” (2.5cm) Width, 11” (28cm) Length
209LRU910
1” (2.5cm) Width, 7” (18cm) Length
209LRU914
714
P r os t h e t ics
STRAPS — Continued
a.
BK Fork Strap
9-10 oz russet leather. Sold each. From Trulife.
Description
Item No.ò
5/8” (1.5cm) Width, 19” (48cm) Length
209L06-259-010A
3/4” (2cm) Width, 21” (53cm) Length
209L07-500-901A
b.
BK Fork Strap with Elastic
3/4” U-shaped 9-10 oz russet leather. 2” x 4-1/2” (5cm x 11cm) exposed elastic. 18” (46cm) length. Sold each.
From Trulife.
Item No. ð
209L01-000-901B
SUSPENSION SLEEVES
c.
ProActive Wear ® Knee Sleeve, 100 Series
ProActive Wear ® Knee Sleeves for auxiliary suspension are now manufactured of abrasion-resistant, soft,
durable, G231 neoprene—the same fabric used to make wet suits for coral divers. The 100 Series has a nylon
exterior and a 3mm neoprene interior. Three colors; pictured here in Khaki. Sold each.
PROSTHETICS
Size0000
000
00011.522.5345
Circ*
7-8.5
8-9.5
9-10.5 10.5-12.511.5-13 12.5-14 14-16
15-17
16-18 18.5-20 21-23
*Circumference measured in inches, 4” above knee center.
Size
Khaki
0000
NKS-100-0000NKS-101-0000 PKS-100-0000
Dark Brown
Tan
000
NKS-100-000NKS-101-000 PKS-100-000
00
NKS-100-00NKS-101-00 PKS-100-00
0
NKS-100-0NKS-101-0 PKS-100-0
1
NKS-100-1NKS-101-1PKS-100-1
1.5
NKS-100-15NKS-101-15PKS-100-15
2
NKS-100-2NKS-101-2PKS-100-2
2.5
NKS-100-25NKS-101-25PKS-100-25
3
NKS-100-3NKS-101-3PKS-100-3
3.5
NKS-100-35NKS-101-35PKS-100-35
4
NKS-100-4NKS-101-4PKS-100-4
5
NKS-100-5NKS-101-5PKS-100-5
PROSTHETICS
d.
715
durable, G231 neoprene—the same fabric used to make wet suits for coral divers. The 200 Series has a nylon
exterior and interior. Three colors; pictured here in Khaki. Sold each.
Size0000
000
00011.522.5345
Circ*
7-8.5
8-9.5
9-10.5 10.5-12.511.5-13 12.5-14 14-16
15-17
16-18 18.5-20 21-23
Size
Khaki
0000
NKS-200-0000NKS-201-0000PKS-200-0000
Dark Brown
Tan
000
NKS-200-000NKS-201-000PKS-200-000
00
NKS-200-00NKS-201-00PKS-200-00
0
NKS-200-0 NKS-201-0PKS-200-0
1
NKS-200-1NKS-201-1PKS-200-1
1.5
NKS-200-15NKS-201-15PKS-200-15
2
NKS-200-2NKS-201-2PKS-200-2
2.5
NKS-200-25NKS-201-25PKS-200-25
3
NKS-200-3NKS-201-3PKS-200-3
3.5
NKS-200-35NKS-201-35PKS-200-35
4
NKS-200-4NKS-201-4PKS-200-4
5
NKS-200-5NKS-201-5PKS-200-5
e.
durable, G231 neoprene—the same fabric used to make wet suits for coral divers. Nylon exterior. Interior
consists of nylon center and 3mm neoprene proximal and distal. Three colors; pictured here in Tan. Sold each.
Size0000
000
00011.522.5345
Circ*
7-8.5
8-9.5
9-10.5 10.5-12.511.5-13 12.5-14 14-16
15-17
16-18 18.5-20 21-23
Khaki
NKS-300-0000NKS-301-0000 PKS-300-0000
Dark Brown
Tan
000
NKS-300-000NKS-301-000 PKS-300-000
00
NKS-300-00NKS-301-00 PKS-300-00
0
NKS-300-0NKS-301-0 PKS-300-0
1
NKS-300-1NKS-301-1PKS-300-1
1.5
NKS-300-15NKS-301-15PKS-300-15
2
NKS-300-2NKS-301-2PKS-300-2
2.5
NKS-300-25NKS-301-25PKS-300-25
3
NKS-300-3NKS-301-3PKS-300-3
3.5
NKS-300-35NKS-301-35PKS-300-35
4
NKS-300-4NKS-301-4PKS-300-4
5
NKS-300-5NKS-301-5PKS-300-5
PROSTHETICS
Size
0000
716
P r os t h e t ics
SUSPENSION SLEEVES — Continued
a.
ProActive Wear® Knee Sleeve, 400 Series
durable, G231 neoprene—the same fabric used to make wet suits for coral divers. Nylon exterior with strap.
Interior consists of nylon proximal and center; 3mm neoprene distal. Three colors; pictured here in Dark
Brown. Sold each.
Size0000
000
00011.522.5345
Circ*
7-8.5
8-9.5
9-10.5 10.5-12.511.5-13 12.5-14 14-16
15-17
16-18 18.5-20 21-23
Size
Khaki
Dark Brown
Tan
0000
NKS-400-0000NKS-401-0000 PKS-400-0000
000
NKS-400-000NKS-401-000 PKS-400-000
00
NKS-400-00NKS-401-00 PKS-400-00
0
NKS-400-0NKS-401-0 PKS-400-0
1
NKS-400-1NKS-401-1PKS-400-1
1.5
NKS-400-15NKS-401-15PKS-400-15
2
NKS-400-2NKS-401-2PKS-400-2
2.5
NKS-400-25NKS-401-25PKS-400-25
3
NKS-400-3NKS-401-3PKS-400-3
3.5
NKS-400-35NKS-401-35PKS-400-35
4
NKS-400-4NKS-401-4 PKS-400-4
5
NKS-400-5NKS-401-5PKS-400-5
b.
Latex Rubber Knee Sleeve
Sold each.
Size0000
000
00011.522.5345
Circ*
PROSTHETICS
7-8.5
8-9.5
9-10.5 10.5-12.511.5-13 12.5-14 14-16
15-17
16-18 18.5-20 21-23
Size
Regular
0000
1050-00001050-ST-0000
Heavy-Duty
000
1050-0001050-ST-000
00
1050-001050-ST-00
0
1050-01050-ST-0
1
1050-11050-ST-1
1.5
1050-151050-ST-15
2
1050-21050-ST-2
2.5
1050-251050-ST-25
3
1050-31050-ST-3
4
1050-41050-ST-4
5
1050-51050-ST-5
PROSTHETICS
c.
717
EasySleeve™ Super Stretch SLE
The EasySleeve Super Stretch has no restraining cover to limit the ALPS EasyGel™ from moving with the
user. 6mm thickness. Spandex cover to keep dirt and clothes away from gel available separately. Sold each.
From ALPS.
Size
XX-Small X-Small
Circumference*
10-15cm 16-19cm 20-23cm 24-25cm 26-27cm 28-31cm 32-37cm
Sleeve
SLE-10SLE-16SLE-20SLE-24SLE-26SLE-28SLE-32
Cover
-
Small
Medium
CSLE-16 CSLE-20 CSLE-24
d.
Large
-
Large
X-Large
CSLE-28 CSLE-32
*Circumference measured 10cm above patella.
EasySleeve™ Fabric Reinforced SFR
Features an integrated high performance fabric cover and ALPS EasyGel™. Achieves secure suspension by
sealing with the skin while allowing freedom of movement throughout knee flexion. Available in 3mm and
6mm thickness in both Regular and Sticky, with a slightly tacky feel. From ALPS.
Size
XX-Small
X-Small
Small
Medium
Med +
Large
X-Large
2X
3X
Circumf*
16-19cm 20-24cm 25-30cm 31-34cm 35-37cm 36-40cm 41-45cm 46-60cm 61-70cm
3mm
SFR16-3SFR16-3SFR20-3SFR24-3SFR26-3SFR28-3SFR32-3SFR38-3SFR44-3
3mm Sticky SFS16-3SFS16-3SFS20-3SFS24-3SFS26-3SFS28-3SFS32-3SFS38-3SFS44-3
6mm
SFR16-6 SFR16-6SFR20-6SFR24-6SFR26-6SFR28-6SFR32-6SFR38-6SFR44-6
6mm Sticky SFS16-6 SFS16-6 SFS20-6 SFS24-6 SFS26-6 SFS28-6 SFS32-6 SFS38-6 SFS44-6
e.
Transparent ClearLine SL
No outer fabric. Transparent silicone construction allows for visual verification of fit. 2mm thickness reduces
bunching behind the knee. Sold each. From ALPS.
Size
Small
Medium
Large
X-Large
2X
Circumference*
24-29cm
30-35cm
36-39cm
40-43cm
44-51cm
Item No. ð SL-S SL-M SL-L SL-XLSL-XXL
Reinforced ClearLine SLR
Integrated outer fabric improves strength and durability while allowing freedom of movement. 2mm thickness reduces bunching behind the knee. Available in three colors. Sold each. From ALPS.
Size
Circ*
Beige
Small
Medium
Large
X-Large
2X
3X
4X
5X
28-32cm33-34cm35-37cm38-40cm41-45cm46-51cm53-57cm58-64cm
SLR-S
SLR-M
SLR-L SLR-XL SLR-2XLSLR-3XLSLR-4XLSLR-5XL
Negroid
SLR-S-N
SLR-M-N
SLR-L-N
Black
SLR-S-BL
SLR-M-BL
SLR-L-BL SLR-XL-BL SLR-2XL-BLSLR-3XL-BLSLR-4XL-BLSLR-5XL-BL
SLR-XL-N SLR-2XL-NSLR-3XL-NSLR-4XL-NSLR-5XL-N
PROSTHETICS
f.
718
P r os t h e t ics
a.
Extreme Sleeve Fabric Reinforced SFK
Extreme Sleeve Fabric Reinforced has superior comfort provided by ALPS™ GripGel. The SFK has limited
vertical stretch and the elasticity of the fabric still allows the user excellent freedom of knee flexion. The
Extreme sleeve also achieves secure suspension by sealing with the skin without restricting circulation, while
the GripGel sticks to the patient’s skin without causing shear forces. The grip will help prevent the sleeve
from rolling down the patient’s limb because of the nature of the GripGel. Sold each. From ALPS.
Size
X-Small
Circumference*
Small
Medium
Large
X-Large XX-Large XXX-Large
3mm
SFK16-3SFK20-3SFK24-3SFK26-3SFK28-3SFK32-3SFK38-3SFK44-3
6mm
SFK16-6SFK20-6SFK24-6SFK26-6SFK28-6SFK32-6SFK38-6SFK44-6
b.
Large
VIVA Sleeve
The ALPS VIVA (Valve Integrated Vacuum Activated) Sleeve has a built-in valve to evacuate air in the socket,
minimizing compression and irritation proximally. Allows freedom of movement through knee flexion.
Durable high performance fabric cover. Available in 6mm and 3mm thickness. Beige. Sold each. From ALPS.
Size
X-Small
Small
Medium
Med+
Large
X-Large
Circumference*
20-24cm
25-30cm
31-34cm
35-37cm
36-40cm
41-45cm
3mm
VIVA16-3VIVA20-3VIVA24-3VIVA26-3VIVA28-3VIVA32-3
6mm
VIVA16-6 VIVA20-6 VIVA24-6VIVA-26-6VIVA28-6 VIVA32-6
c.
Comfort Endurance™ ZipSleeve
The Comfort ZipSleeve is the newest addition to the family of Comfort Endurance Suspension Sleeves.
ZipSleeves “add a little zip” for geriatric patients who may be wearing a neoprene suspension sleeve. Gone
are the days for the geriatric patient with the struggle of tugging and rolling endlessly to get their sleeve in
place. Simply zip it up! 15” (38cm) length. Black or beige. Sold each. From Comfort Products.
Size 00011.522.5345
PROSTHETICS
Circumf*
9-10”
10.5-12” 12.5-14” 13.5-15” 14.5-16” 15.5-17” 16.5-18” 18.5-20” 20.5-22”
Black
SUZ00SUZ0 SUZ1SUZ15SUZ2SUZ25SUZ3 SUZ4 SUZ5
Beige
SUZB00SUZB0SUZB1SUZB15SUZB2SUZB25SUZB3SUZB4SUZB5
d.
*Circumference measured 4” above knee center.
Comfort Endurance™ Criterion
The CRITERION features a smooth skin lining that gives superior comfort against the skin and reduces the
chance for popliteal bunching. For patients without strenuous activity levels, the CRITERION is an excellent
choice for comfort and durability. 15” (38cm) length. Black or beige. Sold each. From Comfort Products.
Size 00011.522.5345
Circumf*
9-10”
10.5-12” 12.5-14” 13.5-15” 14.5-16” 15.5-17” 16.5-18” 18.5-20” 20.5-22”
Black
SUC00SUC0 SUC1SUC15SUC2SUC25SUC3 SUC4 SUC5
Beige
SUCB00SUCB0 SUCB1SUCB15SUCB2SUCB25SUCB3 SUCB4 SUCB5
PROSTHETICS
e.
719
Comfort Endurance™ Sport
The SPORT has all of the features of the CRITERION with the added benefit of a nylon lined center section
to reduce abrasion. This design allows the sleeve to give excellent suspension in even the most demanding
of conditions. For patients with less active lifestyles, try the Endurance CRITERION. 15” (38cm) length. Black
or beige. Sold each. From Comfort Products.
Size 00011.522.5345
Circumf*
9-10”
10.5-12” 12.5-14” 13.5-15” 14.5-16” 15.5-17” 16.5-18” 18.5-20” 20.5-22”
Black
SUS00SUS0 SUS1SUS15SUS2SUS25SUS3 SUS4 SUS5
Beige
SUSB00SUSB0 SUSB1SUSB15SUSB2SUSB25SUSB3 SUSB4 SUSB5
f.
FlexiSleeve™
A comfortable, durable and cost effective alternative to straight suspension sleeves. Use with or without a
BK suction valve. Flex Suspension sleeves provide a secure connection of the prosthesis to the limb and are
preflexed at 43° to allow for natural unrestricted movement. FlexiSleeve™ is designed for maximum comfort
and mobility for all levels of activity. Available in Chocolate (-C), Tan (-T) or Black (-B). Specify color when
ordering. Sold each. From ESP.
Size
011.522.5345
Circumf*
10.5-12.5” 11.5-13” 12.5-14”
Item No. ð
KS-ESP-0- KS-ESP-1KS-ESP-1.5KS-ESP-2KS-ESP-2.5KS-ESP-3 KS-ESP-4 KS-ESP-5
14-16”
15-17”
g.
16-18” 18.5-20” 21-23”
*Circumference measured 5” above patella.
FlexiSport™
A comfortable, durable and cost effective alternative to straight suspension sleeves. Use with or without a
BK suction valve. Flex Suspension sleeves provide a secure connection of the prosthesis to the limb and are
preflexed at 43° to allow for natural unrestricted movement. FlexiSport™ features a nylon reinforced knee
inside and out for higher activity levels. Black only. Specify size when ordering. Sold each. From ESP.
Size
Circumf*
011.522.5345
10.5-12.5” 11.5-13” 12.5-14”
14-16”
15-17”
16-18” 18.5-20” 21-23”
Item No. ð
KS-ESP-S-(Size)-B
ContexGel Knee Sleeve
ContexGel Knee Sleeves can be used for BK amputees as a suspension sleeve or as a sealing-mechanism
for vacuum sockets. The anatomical shape allows for an all-around 3mm material thickness. Therefore the
ContexGel Knee Sleeve stays elastic and with its comfortable posterior sewing eliminates posterior pressure.
The new Streifeneder Polymer Gel SPG offers a supreme seal and stretch. The abrasion resistant textile allows easy handling for donning and doffing (up and down). 350mm length. Blonde or gray color. Sold each.
From Euro International.
Size
Small
Medium
Large
X-Large
2X-Large
Distal Measure
15-23cm
21-31cm
28-43cm
34-51cm
38-55cm
Proximal Measure
23-25cm
29-44cm
36-52cm
42-61cm
43-74cm
Blonde
PROSTHETICS
h.
3S10/S 3S10/M 3S10/L 3S10/XL3S10/XXL
Gray
3S20/S 3S20/M 3S20/L 3S20/XL3S20/XXL
Protective Cover
3S50/S3S50/S3S50/L3S50/XL
3S50/XXL
720
P r os t h e t ics
a.
Juzo® Supsension Sleeves
Juzo Suspension Sleeves are designed to increase a person’s feeling of security and provide a smooth transition
from the prosthesis to the limb. 30-40 mmHg compression. Specify size when ordering. Sold each. From Juzo.
Length
12”
14”
16”
Item No. ð
3232DF (Size) 3232 DG (Size) 3232DGE (Size)
Sizing Guide
Size
45678910
11
12
14
12” Length
F Measure1
38cm 39.5cm 41cm 42.5cm 44cm 45.5cm 47cm 48.5cm 50cm 53cm
E Measure 31cm 32.5cm 34cm 35.5cm 37cm 38.5cm 40cm 41.5cm 43cm
46cm
D Measure3
28cm 29.5cm 31cm 32.5cm 34cm 35.5cm 37cm 38.5cm 40cm
43cm
2
6” above knee center. 2Knee center. 36” below knee center.
1
14” Length
G Measure 4
57cm
E Measure5
46cm
D Measure 6
43cm
4
7” or 8” above knee center. 5Knee center. 66” below knee center.
16” Length
G Measure 4
57cm
E Measure5
46cm
D Measure 6
43cm
b.
4
7” or 8” above knee center. 5Knee center. 66” below knee center.
EPX Suspension Sleeve
A low profile sleeve made of breathable waterproof material. Heavy-Duty style features a 1.5” silicone band
at proximal and distal ends of sleeve. Premium Heavy-Duty style features an additional silicone band and
elastic strap at proximal end of sleeve. Hand wash. Sold each. From Lohmann & Rauscher.
Size00011.522.5345
PROSTHETICS
Circ*
9-10.5 10.5-12.511.5-13 12.5-14 14-16
15-17
16-18 18.5-20 21-23
*Circumference measured in inches, 8” proximal to mid patella.
Size
Heavy-Duty
Caucasian
Heavy-Duty
Black
Premium HD
Caucasian
Premium HD
Black
00
3MEVSC00 3MEVSB003MEPSC00 3MEPSB00
0
3MEVSC013MEVSB013MEPSC01 3MEPSB01
1
3MEVSC103MEVSB103MEPSC10
1.5
3MEVSC153MEVSB153MEPSC15 3MEPSB15
2
N/A
2.5
3
4
5
PROSTHETICS
c.
721
Suspension Sleeve K55
1/8” neoprene with Lycra mid section. Sold each. From New Options Sports.
Size0000
000
00011.522.5345
Circ*
7-8.5
8-9.5
9-10.5 10.5-12.511.5-13 12.5-14 14-16
15-17
16-18 18.5-20 21-23
Size
Khaki
0000
K55-KHAKI-0000 K55-BLACK-0000K55-TAN-0000
Black
Tan
000
K55-KHAKI-000
K55-BLACK-000K55-TAN-000
00
K55-KHAKI-00
0
K55-KHAKI-0
1
K55-KHAKI-1
1.5
K55-KHAKI-15
2
K55-KHAKI-2
2.5
K55-KHAKI-25
3
K55-KHAKI-3
4
K55-KHAKI-4
5
K55-KHAKI-5
d.
Martin Suspension Sleeve
3/16” neoprene with proximal front closure and straps. Not airtight. Sold each. From New Options Sports.
Size
00
0
1
1.5
2
Circ*
9-10.5
10.5-12.5
11.5-13
12.5-14
14-16
Item No. ðK77-TAN-00K77-TAN-0 K77-TAN-1K77-TAN-15 K77-TAN-2
Size
2.5
3
4
5
Circ*
15-17
16-18
18.5-20
21-23
Item No. ðK77-TAN-25K77-TAN-3 K77-TAN-4 K77-TAN-5
Gel Suspension Sleeve
R&B Medical Gel Suspension Knee sleeves provide the perfect balance of comfort and durability. Special
formulation of high performance gel is skin friendly while offering a good seal to securely hold your prosthesis in place. Low profile seam and stretch of the fabric allow for easy flexion of the knee without adding
too much bulk. Superior bond between the gel and fabric limits delaminating. Fabric slides easily against
itself to allow for easy donning. 350mm length. 3mm gel thickness. 6 month warranty. Available in blue (-B),
Dark Gray (-DG), Light Gray (-LG) and Tan (-T). Specify color when ordering. Sold each. From R&B Medical.
Size
Size Code
X-Small
XS
Small
S
Medium
M
Large
L
X-Large
XX-Large XXX-Large
XL XXLXXXL
Proximal 1
16-24cm23-35cm29-44cm36-52cm 42-61cm 43-74cm55-80cm
Distal2
10-17cm 15-23cm21-31cm29-43cm34-51cm38-55cm42-62cm
Item No. ð
1
10-RBW80-(Size)-(Color)
Measured 15cm proximal to MPT. 2 Measured 15cm distal to MPT.
PROSTHETICS
e.
*Circumference measured in inches, 5” above knee.
722
P r os t h e t ics
a.
BK Gel Suspension Sleeve™
Standard or reinforced center fabric for added durability. Both are fully lined with Silipos® medical-grade
mineral oil gel. Sold each. From Silipos.
Flat Size
4”
5”
6”
7.5”
Length
12”
14”
16”
16”
Standard
Heavy Duty
13055 1306513075 13085
1310 13111312N/A
b.
DuraGel™ Suspension Sleeve
Features a flexible yet durable outer material and mineral oil gel to moisturize and condition the skin. 3mm
gel thickness. Standard or Reinforced for added durability. Available in five sizes. From Silipos.
Size
Medium
Medium+
Med+ Dist+*
Large
Large+
Proximal (Relaxed)
9” (23cm)
14.25” (36cm) 14.25” (36cm) 13.5” (34cm)
Proximal (Fully Stretched)
18” (46cm)
26.75” (68cm) 26.75” (68cm)
24” (61cm)
28” (71cm)
9.25” (23cm)
12” (31cm)
11.25” (29cm)
Distal (Relaxed)
7.75” (19cm)
10.5” (27cm)
16.25” (41cm)
Distal (Fully Stretched)
14.25” (36cm) 16” (40cm)
17” (43cm)
18” (46cm)
20” (51cm)
Standard
18181 18182 1818518183 18184
Reinforced
18191 18192 1819518193 18194
c.
*Med+Distal+ features a larger distal end to accommodate sockets.
Proximal circumference measured 15” from distal end. Distal circumference measured 1.5” from distal end.
Durasleeve™
PROSTHETICS
The Durasleeve™ air-tight hypobaric suction environment is constructed of the highest quality neoprene
and meets the needs of exceptionally active patients. This sleeve features contouring at the back of knee to
reduce bunching and increase comfort. Preflexed knee design is naturally shaped with no seams for reduced
pressure on the patella. Inside, the neoprene lining is glued for uncompromised air-tight integrity. Regular
is approximately 1/8” thick. The more durable Heavy-Duty is approximately 3/16”. The easy-to-apply EZ style
is designed for patients with limited dexterity or with functional levels K1 and K2. Sold each. From Syncor,
the makers of the Original TES Belt™.
Size
Circ*
00012345
8-10”
10-12”
12-14”
14-16”
16-18”
18-21”
21-25”
Size
Regular
Heavy-Duty
EZ
00
DUR-XX0N/A
N/A
0
DUR-000DUR-HD-0 DUR-EZ-0
1
DUR-100DUR-HD-1DUR-EZ-1
2
3
4
5
PROSTHETICS
d.
723
Neoprene Suspension Cuff
15” beige neoprene sleeve, 1/8” thick, unlined inside for friction coupling with prosthetic socket. Glued and
sewn anterior seam, contoured around patellar area. Snug posterior dimensions for faithful adherence to
the socket. Sold each. From Truform.
Size 00011.522.5345
15”
0819-000819-0 0819-1 0819-15 0819-20819-250819-3 0819-4 0819-5
16”
0818-000818-0 0818-1 0818-15 0818-20818-250818-3 0818-4 0818-5
e.
Alpha® Flex Sleeve
Featuring a highly flexible fabric for greater comfort, flexibility and increased range of motion, the Alpha
Flex Sleeve may be used with locking suspension, suction suspension, or with LimbLogic™ VS for creating an
airtight seal. The Alpha Flex uses a unique blend of Kevlar pulp and traditional Alpha gel with mineral oil.
This blend provides increased sleeve durability as well as greater puncture and abrasion resistance without
compromising comfort. For even more durability, the Alpha Flex Sleeve features a contoured polyurethane
pad on the interior fabric cuff. This pad, which covers the typical socket brim, helps reduce damage to the
seal due to impacts in the brim area. 3mm gel thickness. Sold each. From WillowWood.
Size
2345678
Thigh*
8.8-12.3”
9.5-13.4”
13-18”
14-20”
16-22”
17.7-25”
19-26”
Patella
7.8-11”
9-13”
11-15.4”
12.6-17.5”
14-19.3”
15.5-21.7”
17-23.6”
Buff
Black
ALS-52B ALS53B ALS-54BALS-55BALS-56BALS-57BALS-58B
ALS-52BK ALS53BK ALS-54BKALS-55BKALS-56BKALS-57BKALS-58BK
f.
*Measured 6” above patella
Alpha® Original Suction Seal
Fully lined with Alpha® gel. Features an interior fabric cuff to protect gel from damage. Sold each. From
WillowWood.
Small
Medium
Large
X-Large
10-13”
13-16”
16-19”
19-24”
Buff
ALS-33B ALS-30BALS-36B ALS-37B
Medium Brown
ALS-33M ALS-30MALS-36M ALS-37M
g.
Alpha® Spirit Suction Seal
Durable unbroken loop Spirit fabric fully lined with Alpha® gel. Features an interior fabric cuff to protect gel
from damage. Sold each. From WillowWood.
Size
2345678
Circumference* 8.8-12.3”
Buff
9.5-13.4”
13-18”
14-20”
16-22”
17.7-25”
19-26”
ALS-42BALS-43BALS-44BALS-45BALS-46BALS-47BALS-48B
Medium Brown ALS-42MALS-43MALS-44MALS-45MALS-46MALS-47MALS-48M
PROSTHETICS
Size
Circumference*
724
P r os t h e t ics
a.
Alpha® AK Sleeve
Designed specifically for transfemoral amputees, the Alpha AK Sleeve may be used with suction suspension
as well as with LimbLogic™ VS for creating an airtight seal. The sleeve features the same flexible fabric as
the Alpha Flex sleeve. The Alpha AK Sleeve also uses a unique blend of Kevlar pulp and traditional Alpha gel
with mineral oil for increased sleeve durability and greater puncture and abrasion resistance. Black. Available
in four sizes. From WillowWood.
Size
Proximal Circumference 1
Medium
Large
X-Large
Distal Circumference 2
20-36cm
Item No. ð
ALS-63K ALS-60KALS-66K ALS-67K
b.
Small
30-43cm33-51cm41-56cm 46-69cm
1
25-43cm
33-48cm
43-61cm
Measured 5cm from Ischial Tuberosity. 2 Measured 15cm from the proximal measurement.
Knit-Rite Prosthetic Knee Sleeve Saver
Premature failure of BK (below the knee) prosthetic suspension sleeves in the area of the prosthetic socket
brim is a common problem for amputees. The Sleeve Saver sleeve protector product from Knit-Rite increases
longevity for prosthetic suspension sleeves. The product is a simple double layer nylon sleeve that is worn
between the socket and the suspension sleeve. When the Sleeve Saver is used, the inner surface of the suspension sleeve is protected from abrasive rubbing of the socket brim, because the two nylon layers of the
Sleeve Saver help absorb friction Sold each. From Knit-Rite.
Description
Narrow
Regular
Knee Circumference
10-12”
14-16”
Item No. ð
3MSPB0NA3MSPB010
c.
KISS® WrapStrap-R®
Residue-free, removable linkage prevents doffing inversion and donning dislodging. Stops under sleeve air
leakage. Strong, reliable construction. Low profile, fully adjustable, tapeless and removable. Sold individually or pack of 10. From KISS®.
Description
Each
10/Pkg
PROSTHETICS
Beige
CMP24/ACMP24/B
Gray
CMP24/CCMP24/D
PROSTHETICS
725
LINERS
d.
AK Extreme Liner
ALPS has engineered their new AK Extreme Liner with 80% less vertical stretch than their regular EasyLiner™,
reducing the movement of redundant tissue and allowing for more control and stability. Ideal for AK and
high activity BK amputees. 3mm and 6mm uniform. Locking or cushion. Sold each. From ALPS.
Circumference*
AKDT16-3AKDT20-3AKDT24-3AKDT26-3AKDT28-3AKDT32-3AKDT38-3AKDT44-3
3mm Locking
6mm Locking
AKDT16-6AKDT20-6AKDT24-6AKDT26-6AKDT28-6AKDT32-6AKDT38-6AKDT44-6
3mm Cusion
AKFR16-3AKFR20-3AKFR24-3AKFR26-3AKFR28-3AKFR32-3AKFR38-3AKFR44-3
6mm Cusion
AKFR16-6AKFR20-6AKFR24-6AKFR26-6AKFR28-6AKFR32-6AKFR38-6AKFR44-6
e.
*Circumference measured 6cm from distal end.
EZ Flex Liner
ALPS™ EZ Flex Liner allows users ease of knee flexion through an unlimited restriction of stretch anteriorly.
Posteriorly the fabric has 80% less vertical stretch which reduces the bunching in the popliteal region. The
ALPS™ EasyGel contains antioxidants that help promote skin health, which also provides comfort and durability. 3mm or 6mm thickness. Sold each. From ALPS.
Circumference*
3mm Locking
EZF16-3EZF20-3EZF24-3EZF26-3EZF28-3EZF32-3EZF38-3EZF44-3
6mm Locking
EZF16-6EZF20-6EZF24-6EZF26-6EZF28-6EZF32-6EZF38-6EZF44-6
f.
EasyLiner™ Fabric Reinforced
The EasyLiner™ features the EasyGel™ to relieve the skin of any shear forces, the high performance fabric
for durability and reinforced seams. A soft 12mm distal pad protects bony prominences at the distal end.
EasyLiner is available in 3mm uniform, 6mm uniform and 6mm to 3mm tapered. Available in locking and
cushion. Sold each. From ALPS.
Circumf*
LockingLockingLockingCushionCushionCushion
3mm
6mm
6-3mm
3mm
6mm
6-3mm
ELDT16-3 ELDT16-6ELDT16-6/3ELFR16-3 ELFR16-6 ELFR-16-6/3
ELDT20-3 ELDT20-6ELDT20-6/3ELFR20-3 ELFR20-6ELFR-20-6/3
24-25cm
26-27cm
28-31cm
32-35cm
36-44cm
43-60cm
g.
EasyLiner™ Super Stretch
All the features of the EasyLiner™, but without the fabric cover to restrict the EasyGel™ from moving with
the user. 6mm, cushion. Sold each. From ALPS.
Circumference*
10-15cm 16-19cm 20-23cm 24-25cm
26-27
28-31cm 32-37cm
Item No. ð
ELPX-10ELPX-16ELPX-20ELPX-24ELPX-26ELPX-28ELPX-32
PROSTHETICS
16-19cm
20-23cm
726
P r os t h e t ics
LINERS — Continued
a.
ClearGen Silicone Liner
Sold each. From ALPS.
Circumf*
14-15cm
16-17cm
18-19cm
20-21cm
24-25cm
26-27cm
GL-14-1.5GL-16-1.5GL-18-1.5GL-20-1.5GL-22-1.5GL-24-1.5GL-26-1.5
3mm
GL-14-3.0GL-16-3.0GL-18-3.0GL-20-3.0GL-22-3.0GL-24-3.0GL-26-3.0
Circumf*
28-29cm
30-31cm
32-33cm
34-37cm
38-43cm
44-51cm
1.5mm
GL-28-1.5GL-30-1.5GL-32-1.5GL-34-1.5GL-38-1.5GL-44-1.5
3mm
GL-28-3.0GL-30-3.0GL-32-3.0GL-34-3.0GL-38-3.0GL-44-3.0
b.
22-23cm
1.5mm
Clearpro™ Transparent Silicone Suction Socket
Provides excellent adhesion to maintain suspension as well as high tear strength to maximize durability. Allows freedom of movement with the added comfort of as little as 1.5mm of material behind the knee. Built-in
distal umbrella accepts all types of pin mechanism locking devices. Sold each. From ALPS.
Circumf*
14-15cm
16-17cm
18-19cm
22-23cm
24-25cm
26-27cm
SSA14-1.5 SSA16-1.5 SSA18-1.5SSA20-1.5SSA22-1.5SSA24-1.5SSA26-1.5
3mm
SSA14-3.0 SSA16-3.0 SSA18-3.0SSA20-3.0SSA22-3.0SSA24-3.0SSA26-3.0
Circumf*
28-29cm
30-31cm
32-33cm
34-37cm
38-43cm
44-51cm
1.5mm
SSA28-1.5SSA30-1.5SSA32-1.5SSA34-1.5SSA38-1.5SSA44-1.5
3mm
SSA28-3.0SSA30-3.0SSA32-3.0SSA34-3.0SSA38-3.0SSA44-3.0
c.
20-21cm
1.5mm
General Purpose Liner
This economically priced liner features the ALPS EasyGel™ to relieve skin of shear forces, high performance
Fabric for durability and a distal end encapsulation which retrofits most other liners. 12 month warranty on
purchase of one liner; 24 month warranty on purchase of two. Available in locking and cushion; 6mm and
3mm uniform. Sold each. From ALPS.
PROSTHETICS
Circumference* 16-19cm
24-25cm
26-27cm
28-31cm
32-35cm
38-44cm
GPDT16-3GPDT20-3GPDT24-3GPDT26-3GPDT28-3GPDT32-3GPDT38-3
6mm Locking
GPDT16-6GPDT20-6GPDT24-6GPDT26-6GPDT28-6GPDT32-6GPDT38-6
3mm Cushion
GPFR16-3GPFR20-3GPFR24-3GPFR26-3GPFR28-3GPFR32-3GPFR38-3
6mm Cushion
GPFR16-6GPFR20-6GPFR24-6GPFR26-6GPFR28-6GPFR32-6GPFR38-6
d.
20-23cm
3mm Locking
Also available in size 44 (43-50cm)
Liberty Liner II
ALPS™ Liberty Liner II allows the expulsion of sweat and air through a built-in valve either through the pin
or reducer. The one-way evacuation valve has been strategically placed distally to evacuate any air between
the user’s skin and the liner. The liner no longer has to work the air out; it expels itself. The liner comes with
one fabric sheath that controls moisture. 6mm gel thickness. Sold each. From ALPS.
Circumf*
Locking
VSDT16-3VSDT20-3VSDT24-3VSDT26-3VSDT28-3VSDT32-3VSDT38-3VSDT44-3
Cushion
VSFR16-6VSFR20-6VSFR24-6VSFR26-6VSFR28-6VSFR32-6VSFR38-6VSFR44-6
LDP-764Liberty Liner II Pin
PROSTHETICS
e.
727
Proximal Seal Interface Liner
The PSI cushion liner offers the user more freedom of movement by sealing on the liner just proximal to the
trim lines of a BK socket instead of sealing proximal to the liner on the skin. ALPS EasyGel™ provides additional
comfort and durability. Integrated fabric cover allows air to wick out. Sold each. From ALPS.
Circumf*
10-15cm 16-19cm 20-23cm 24-25cm 26-27cm 28-31cm 32-35cm 36-43cm 44-53cm
3mm
PSI10-3PSI16-3PSI20-3PSI24-3PSI26-3PSI28-3PSI32-3PSI38-3PSI44-3
6mm
PSI10-6PSI16-6PSI20-6PSI24-6PSI26-6PSI28-6PSI32-6PSI38-6PSI44-6
f.
Thermoliner ®
The Thermoliner™ is a gel interface which can be customized and shaped to the configuration of the user.
Simply apply the liner to a positive cast and place in a 194°F oven for 30 minutes. 3mm or 6mm thickness.
Available in locking and cushion. Sold each. From ALPS.
Circumference*
3mm Locking
TFDT16-3TFDT20-3TFDT24-3TFDT26-3TFDT28-3TFDT32-3TFDT38-3TFDT44-3
6mm Locking
TFDT16-6TFDT20-6TFDT24-6TFDT26-6TFDT28-6TFDT32-6TFDT38-6TFDT44-6
3mm Cushion
TFFR16-3TFFR20-3TFFR24-3TFFR26-3TFFR28-3TFFR32-3TFFR38-3TFFR44-3
6mm Cushion
TFFR16-6TFFR20-6TFFR24-6TFFR26-6TFFR28-6TFFR32-6TFFR38-6TFFR44-6
g.
ComforGel™ Liner
The ComforGel™ Liner sandwiches a specially formulated gel between inner and outer layers of cotton fabric.
The stretch fabric allows for the liner to conform to virtually any shape and provide exceptional comfort,
while the nylon reinforced distal end ensures greater durability. Available in three and five ply thicknesses
and a variety of sizes to accommodate practically any amputee. Sold each. From Comfort Products.
Ply
Style
Sock Length
Flat
Max
9” Gel
12” Gel
Width Circumf
9” Gel
w/Hole
12” Gel
w/Hole
12”
2-1/4”
10”
CGELYA CGELYAFDCGELYA3CGELYFD3
3
14”
2-1/4”
10”
CGELYA14 CGELYA14/12 CGELYA143CGELYA14/123
5
12”
2-1/4”
10”
CGELGA CGELGAFDCGELGA3 CGELGFD3
CGELGA14 CGELGA14/12 CGELGA143CGELGA14/123
5
14”
2-1/4”
10”
AK
3
12”
5-1/4”
26”
CGELAY CGELAYFD CGELAY3CGELAYFD3
3
14”
5-1/4”
26”
CGELAY14 CGELAY14/12 CGELAY143CGELAY14/123
5
12”
5-1/4”
26”
CGELAG CGELAGFD CGELAG3CGELAGFD3
5
14”
5-1/4”
26”
CGELAG14 CGELAG14/12 CGELAG143CGELAG14/123
BK
3
12”
3.5”
20”
CGELY CGELYFD CGELY3CGELYFD3
3
14”
3.5”
20”
CGELY14 CGELY14/12 CGELY143CGELY14/123
3
16”
3.5”
20”
CGELY16 CGELY16/12 CGELY163CGELY16/123
5
12”
3.5”
20”
CGELG CGELGFD CGELG3CGELGFD3
5
14”
3.5”
20”
CGELG14 CGELG14/12 CGELG143CGELG14/123
5
16”
3.5”
20”
CGELG16 CGELG16/12 CGELG163CGELG16/123
PROSTHETICS
Arm 3
728
P r os t h e t ics
a.
Aegis Ultimate Liner
A 6mm soft silicone gel liner with fabric cover available in locking or cushion styles. Sold each. From ESP.
Length**
4”
6”
8”
4”
6”
8”
Circumf* LockingLockingLockingCushionCushionCushion
14-20cm
BK-U-XS-4L BK-U-XS-6L BK-U-XS-8L BK-U-XS-4CBK-U-XS-6C BK-U-XS-8C
20-26cm
BK-U-S-4L BK-U-S-6L BK-U-S-8L BK-U-S-4CBK-U-S-6C BK-U-S-8C
26-32cm
BK-U-M-4L BK-U-M-6L BK-U-M-8L BK-U-M-4CBK-U-M-6C BK-U-M-8C
32-38cm
BK-U-L-4L BK-U-L-6L BK-U-L-8L BK-U-L-4CBK-U-L-6C BK-U-L-8C
38-42cm
BK-U-XL-4L BK-U-XL-6L BK-U-XL-8L BK-U-XL-4CBK-U-XL-6C BK-U-XL-8C
b.
*Circumference measured 2” from distal end.
**Length measured from mid-patellar tendon to distal end.
Aegis Seal-Pro Transtibial (TT) Liner
A soft and durable silicone liner with 6mm thickness where fabric covered (4mm where not covered). It
features a customized outer fabric and is available in locking and cushion styles. Standard fabric in locking
version. Sold each. From ESP.
Length**
4”6”8”4”6”8”4”6”8”
Style
No Fabric No Fabric No Fabric Custom Custom Custom Locking Locking Locking
Circumf* FabricFabricFabric
14-20cm
SP-XS-4 SP-XS-6 SP-XS-8 SP-XS-4FSP-XS-6FSP-XS-8FSP-XS-4LSP-XS-6LSP-XS-8L
20-26cm
SP-S-4 SP-S-6 SP-S-8 SP-S-4FSP-S-6FSP-S-8FSP-S-4LSP-S-6LSP-S-8L
26-32cm
SP-M-4 SP-M-6 SP-M-8 SP-M-4FSP-M-6FSP-M-8FSP-M-4LSP-M-6LSP-M-8L
32-38cm
SP-L-4 SP-L-6 SP-L-8 SP-L-4FSP-L-6FSP-L-8FSP-L-4LSP-L-6LSP-L-8L
38-42cm
SP-XL-4 SP-XL-6 SP-XL-8 SP-XL-4FSP-XL-6FSP-XL-8FSP-XL-4LSP-XL-6LSP-XL-8L
c.
Aegis Seal-Pro Transfemoral (TF) Liner
A soft and durable silicone liner with 6mm thickness where fabric covered (4mm where not covered). It
features a customized outer fabric and is available in locking and cushion styles. Standard fabric in locking
version. Sold each. From ESP.
PROSTHETICS
Size
30cm
34cm
42cm
46cm
Circumference*
32-36cm
36-40cm
40-44cm
44-48cm
48-52cm
No Fabric
SP-TF-30
SP-TF-34
SP-TF-38
SP-TF-42
SP-TF-46
Custom Fabric
SP-TF-30F
SP-TF-34F
SP-TF-38F
SP-TF-42F
SP-TF-46F
Locking Liner
SP-TF-30L
SP-TF-34L
SP-TF-38L
SP-TF-42L
SP-TF-46L
d.
38cm
Aegis TF Liner
The Aegis TF Liner is a 3mm soft silicone gel liner with fabric cover. It is available in locking or cushion styles.
Sold each. From ESP.
Size
30cm
34cm
38cm
42cm
46cm
Circumference*
32-36cm
36-40cm
40-44cm
44-48cm
48-52cm
Locking
TF-30-L
TF-34-L TF-38-LTF-42-L TF-46-L
Cushion
TF-30-C
TF-34-C TF-38-CTF-42-C TF-46-C
PROSTHETICS
729
Aegis SoFlex and Streamline Liner
e.
The Aegis Soflex Liner is a covered durable soft silicone liner. It is preflexed at 43° and available in locking and
cushion styles. The Aegis Streamline Clear Liner is clear 2mm silicone liner with no fabric cover. It is available
in locking and cushion styles. The Aegis Streamline Covered Liner has a thickness of 3mm and comes with
fabric cover and is available in locking and cushion styles. Sold each. From ESP.
Circ* Length** SoFlex
SoFlex
Streamline
Streamline Streamline
Streamline
LockingCushionLockingCushionLocking Cushion
Clear
Clear
w/Cover
w/Cover
SoFlex
Streamline
17-19cm 4”
SBK14-4L SBK14-4C BK-14-4S BK-14-4G BK-14-4S-CBK-14-4G-C
6”
8”
19-21cm 4”
6”
8”
21-23cm 4”
6”
8”
23-25cm 4”
6”
8”
10” SBK20-10L SBK20-10C BK-20-10S BK-20-10G BK-20-10S-CBK-20-10G-C
25-27cm 4”
6”
8”
27-29cm 4”
6”
8”
30-32cm 4”
6”
8”
6”
8”
35-37cm 4”
6”
8”
PROSTHETICS
32-34cm 4”
730
P r os t h e t ics
a.
First-Class Liner, 3mm
3mm silicone liner with 10cm internal matrix. Comfort-sil-gel provides high wearing comfort. Fine single-jersey
fabric cover offers very smooth sliding characteristics with minimized elasticity in length, yet retains circular
elasticity. Locking or cushion styles. 6 month warranty. Sold each. From Euro International.
Size
161820212223.52526.5283032343638404245
Code
161820212223.52526.5283032343638404245
Locking
1S5/ (Size)
Cushion
1S7/ (Size)
b.
ContexGel-Liner
Features Streifendeder Polymer Gel-SPG for added skin care. Thermoformable at 65°C. Fine single-jersey fabric
cover offers very smooth sliding characteristics with minimized elasticity in length, yet retains circular elasticity. Locking or cushion styles in three wall thicknesses. 6 month warranty. Sold each. From Euro International.
Size
Small
Medium
Large
X-Large
XX-Large
16-23cm
Proximal Circumference
25-36cm
18-30cm
24-38cm
28-41cm
32-54cm
24-41cm
38-62cm
41-65cm
3mm Locking
2S10/3S 2S10/3M 2S10/3L 2S10/3XL2S10/3XXL
43-73cm
6mm Locking
2S10/6S 2S10/6M 2S10/6L 2S10/6XL2S10/6XXL
9mm Locking
2S10/9S 2S10/9M 2S10/9L 2S10/9XL2S10/9XXL
3mm Cushion
2S11/3S 2S11/3M 2S11/3L 2S11/3XL2S11/3XXL
6mm Cushion
2S11/6S 2S11/6M 2S11/6L 2S11/6XL2S11/6XXL
9mm Cushion
2S11/9S 2S11/9M 2S11/9L 2S11/9XL2S11/9XXL
c.
medi Liner RELAX 3C/6C Locking
The Relax liner functions as a high quality silicone transtibial liner, with the added benefit of an Umbrellan
cover for protection of the limb from environmental triggers such as electromagnetic influences. Available
in 3mm and 6mm thicknesses. Also available in cushion style. Sold each. From Medi USA.
PROSTHETICS
Size
18cm
20cm
22cm
23.5cm
25cm
26.5cm
3mm
M892118 M892120 M892122 M892123M892125 M892126
6mm
M892218 M892220 M892222 M892223M892225 M892226
Size
28cm
30cm
32cm
36cm
40cm
45cm
3mm
M892128 M892130 M892132 M892136M892140 M892145
6mm
M892228 M892230 M892232 M892236M892240 M892245
d.
medi Liner RELAX TFS/TFC
The Relax TFS and Relax TFC (conical profile) liner is designed for the transfemoral amputee with phantom
pain and the need for simple and easy application. Easy to roll up the limb without the use of lubricants.
Absence of textile cover allows for amazing radial stretch, which reduces proximal irritation and accommodates fleshy limbs. Full-length matrix virtually eliminates longitudinal stretch associated with pistoning.
2mm thickness provides necessary comfort without adding excessive bulk and weight. Standard or conical
profiles. Sold each. From Medi USA.
Size
27cm31cm35cm39cm43cm47cm52cm
Standard
M895227 M895231M895235M895239M895243M895247M895252
Size
24cm
Conical
M895424
27cm
31cm
35cm
39cm
M895427M895431M895435M895439
PROSTHETICS
e.
731
medi Liner SENSITIVE 3C/6C Locking
The Sensitive Liner is designed for the transtibial amputee with standard or conical shaped limbs. Soft silicone gel provides the ultimate in comfort and durability. Available in 3mm and 6mm thicknesses. Sold each.
From Medi USA.
Size
18cm
20cm
22cm
23.5cm
25cm
26.5cm
3mm
M893118 M893120 M893122 M893123M893125 M893126
6mm
M893218 M893220 M893222 M893223M893225 M893226
Size
28cm
30cm
32cm
36cm
40cm
45cm
3mm
M893128 M893130 M893132 M893136M893140 M893145
6mm
M893228 M893230 M893232 M893236M893240 M893245
f.
medi Liner PROTECT 3C Locking
The Protect Care transtibial liner is specially formulated with skin care properties for amputees with dry or
sensitive skin. 3mm thickness. Also available in cushion style. Sold each. From Medi USA.
Size
Item No. ð
Size
Item No. ð
18cm
20cm
22cm
23.5cm
25cm
26.5cm
MC99118 MC99120 MC99122 MC99123MC99125 MC99126
28cm
30cm
32cm
36cm
40cm
45cm
MC99128 MC99130 MC99132 MC99136MC99140 MC99145
g.
medi Liner AKOS TFS/TFC
The AKOS TF and Relax TFC (conical profile) liners provide all the unique properties of the Relax TF/TFC
without phantom pain applications. Translucent material allows areas of pressure to be visible during check
socket fittings. Gliding surface eases donning for those with diminished hand strength. Excellent radial stretch
properties. Standard or conical profiles. Sold each. From Medi USA.
Size
27cm31cm35cm39cm43cm47cm52cm
Standard
M895127 M895131M895135M895139M895143M895147M895152
Size
24cm
Conical
M895324
27cm
31cm
35cm
39cm
M895327M895331M895335M895339
Keasy® Cone
A unique foam cone used to create a seamless liner between the residual limb and socket (soft liner) or
between a gel liner and socket (hard liner). Keasy® cones are thermoformable and easily modified in five
minutes, creating a smooth, glueless finish that helps avoid possible allergic reactions. The liner can be reworked to accommodate for patient changes four to five times without affecting structural characteristics.
Closed cell structure allows for easy cleaning, effective hygiene and durability. From Nabtesco Proteor-USA.
Description
Length
Proximal
Profile
DiamterThickness
Distal
Item No.ò
1S400-210
Transfemoral
500mm
210mm
6.5mm
10mm
Transtibial, Short and Medium
400mm
160mm
6.5mm
10mm
1S400-160
Transtibial, Long
500mm
180mm
6.5mm
12mm
1S400-180
Transtibial, Small
305mm
110mm
5mm
8mm
1S402-110
Transtibial, Long and Thin
500mm
130mm
6.5mm
10mm
1S400-130
PROSTHETICS
h.
732
P r os t h e t ics
LINERS —
Continued
a.
ComfortZone™ Liners™
ComfortZone™ Gel Liners offer a high level of comfort, durability and protection from abrasion. Three
styles—Single Socket (3 ply) with 3mm of gel against skin and CoolMax® exterior material; Double Socket (5
ply) with 3mm of gel between two layers of CoolMax®; and Ultra Cushion (3 and 5 ply) with 3mm or 5mm of
gel between two layers of cotton material and nylon reinforced toe. White. Sold each. From Silipos.
Single/Double Socket Gel Liner
Size
Short/Narrow
Short/Regular
Medium/Regular
Liner Length
12” (30.5cm)
12” (30.5cm)
16” (40.5cm)
Gel Length
10” (25cm)
10” (25cm)
12” 30.5cm)
15-18” (38-45cm)
15-18” (38-45cm)
15-18” (38-45cm)
9-12” (23-30.5cm) 12-14” (30.5-35.5cm)12-14” (30.5-35.5cm)
Single Socket (3 Ply)
127251275512765
Double Socket (5 Ply)
126251265512665
Ultra Cushion Gel Liner
Size
Short/Regular
Medium/Regular
Liner Length
12.5” (32cm)
13.5” (34cm)
Medium/Wide
14.5” (37cm)
Gel Length
10” (25cm)
12” (30.5cm)
12” (30.5cm)
8-13” (20-33cm)
10-15” (25-38cm)
12-17” (30.5-43cm)
7-11” (18-28cm)
18-14” (20-35.5cm) 10-16” (25-40.5cm)
3 Ply
125551256512575
5 Ply
125151252512535
b.
SiloLiner™
Easy to don and doff, SiloLiner™ is a skin-friendly, easy to use solution for geriatric and post-op patients. Reinforced cuffs prevent liner from rolling down and irritating skin. Silipos’ softest gel available helps moisturize
and condition skin grafts and scars. Ideal for long-term care and transfer patients. Outer material provides
wide range of motion. 6mm gel thickness. From Silipos.
PROSTHETICS
Pin Liner
Flat Width
3” (7.6cm)
4” (10.2cm)
5” (12.7cm)
6” (15.2cm)
MPT
8-14”
(20-35.5cm)
9.5-16”
(24-40.5cm)
12-20”
(30.5-51cm)
14-26”
(35.5-66cm)
at urethane attachment
8-12”
(20-30.5cm)
9.5-13.5”
(24-34cm)
12-15”
(30.5-38cm)
14-16”
(35.5-40.5cm)
1/Pkg 12” Length ð
1460-EA1461-EA1462-EA 1463-EA
1/PKg 14” Length ð
1464-EA 1465-EA1466-EA 1467-EA
DISCON DISCONDISCON DISCON
Cushion Liner
Flat Width
3” (7.6cm)
4” (10.2cm)
5” (12.7cm)
6” (15.2cm)
MPT
8-14”
(20-35.5cm)
9.5-16”
(24-40.5cm)
12-20”
(30.5-51cm)
14-26”
(35.5-66cm)
measured 2” from distal end
8-14”
(20-35.5cm)
9.5-16”
(20-40.5cm)
12-17”
(30.5-43cm)
14-19”
(35.5-48cm)
1612-EA 1613-EA1614-EA 1615-EA
1622-EA 1623-EA1624-EA 1625-EA
PROSTHETICS
c.
733
DuraGel™ Liner
DuraGel™ Liners for activity levels K1-K3 feature a denser durometer gel for added gel life and are available
in both pin and cushion styles. Nylon composite fabric provides abrasion resistance and gel bond. Mineral
oil gel formula providing comfort and skin protection will not tear or thin out with stress. Now available in
9mm. Retrofits to Explorer and Alpha® sockets. Sold each. From Silipos.
Size
measured 15” from distal end
MediumMedium+ Large
9-15”
(23-38cm)
13-20”
(33-51cm)
15-21”
(38-53cm)
Large+ X-Large
16-26”
(41-66cm)
16-29”
(41-74cm)
8-13”
9-13”
9-16”
12-17”
12-21”
measured 1.5” from distal end (20-33cm)
(23-33cm)
(23-41cm)
(30-43cm)
(30-53cm)
Size
Med Med+LargeLarge+
X-LargeMed Med+Large
UniformUniformUniformUniformUniformTapered Tapered Tapered
Pin Liner, 3mm
18211182121821318214182151821618217 N/A
Pin Liner, 6mm
18201
Pin Liner, 9mm
18221182221822318224 N/AN/AN/AN/A
18202
18203
18204 18205-SI18206-SI 18207
18208
Cushion, 3mm
18251182521825318254182551825618257 N/A
Cushion, 6mm
1824118242182431824418245182461824718248
Cushion, 9mm
18261182621826318264 N/AN/AN/AN/A
d.
Low Activity Liner
With a softer durometer gel to accommodate the diabetic patient, the Low Activity Liner provides skin conditioning and comfort for low to moderate activity level patients. Features include a stabilizing matrix for
reduced distal elongation and gel thicknesses of 3, 6 and 9mm. Sold each. From Silipos.
Size
Proximal Circumference*
Medium
Medium+
Large
Large+
9-16”
(23-41cm)
13-21”
(33-53cm)
15-22”
(38-56cm)
16-27”
(41-68cm)
X-Large
16-30”
(41-76cm)
Distal Circumference**
8-12”
9-12”
9-15”
12-16”
12-20”
(20-30cm)
(23-30cm)
(23-38cm)
(30-41cm)
(30-51cm)
Size MedMed+Large
Large+
X-LargeMedMed+
Gel UniformUniformUniformUniformUniformTapered Tapered
Pin Liner
3mm
18101181071811318116181191810218108
6mm 18103181091811418117181201810418110
9mm
Cushion Liner
3mm 18141181471815318156181591814218148
18105181111811518118 N/A 1810618112
6mm 18143181491815418157181601814418150
9mm 18145181511815518158 N/A 1814618152
*Proximal circumference measured 15” from distal end.
**Distal circumference measured 1.5” from distal end.
PROSTHETICS
734
P r os t h e t ics
LINERS —
Continued
Alpha® Classic Locking Liner
a.
Alpha Classic Liners are available in three distinctly different fabrics and three gel thicknesses, as well as various sizes to adapt to the amputee’s limb circumference. Additionally, medium, medium-plus and large sizes
are available in three distinct gel profiles to accommodate various limb shapes with additional comfort. Alpha
Classic Liners are composed of skin-friendly Alpha Classic Gel and are heat moldable, allowing prosthetists
to easily stretch the liners within their facilities.
The durable Original fabric helps extend the life of the liner. Alpha Spirit fabric may be used with Velcro® type material and is more flexible than other Classic fabrics. The extra flexibility allows for easier donning
and doffing and easier flexing at the knee. The MAX fabric provides an outer cover for the liner that is more
abrasion resistant than other liners on the market today. The one-way stretch Select fabric controls pistoning
while remaining easy to don. Sold each. From WillowWood.
Original Green/Gray
Size Guide
Small
Medium Medium
Med+
Med+
w/Sm Umb*w/Sm Umb*
Large
Large+
X-Large
Prox. Circ1
20-27cm23-36cm23-36cm33-50cm33-50cm36-55cm40-60cm43-65cm
Distal Circ 2
15-22cm 18-26cm18-26cm20-28cm20-28cm25-33cm28-40cm33-45cm
1
Measured 30cm from distal end. 2Measured 4cm from distal end.
*Liner with Small Umbrella is a non-stock item with 3-day lead time.
Complete the item number below by choosing from options beneath t. (Example: ALC-5196-E)
Max Fabric
Item No. ð (Code)-(Style) (Fabric) (Thickness) (Size)-Qty
Code
t
Style
tFabric
tThick
t
Size
t
Single Liner
t
Locking ALLUniform 5 Original Grn/Gray 03mm
3Small
3
Original, Spirit E
Cushion ALCTapered1
7 Original Buff
16mm
6Medium 0Max
X
Contoured1 9 Original Md Brn 29mm
9
Med w/SMU2 1
Spirit Green/Gray 3 Medium+ 4
Spirit Buff
4
MD+ w/SMU2 5
Spirit Med Brown 5 Large
6
MAX Brown
8 Large+
8
X-Large 7
2
PROSTHETICS
b.
1
Offered in Medium, Medium Plus and Large sizes only.
Liner with Small Umbrella is a non-stock item with 3-day lead time.
Alpha® Silicone Liner
The Alpha® Silicone Liner uses a proprietary, platinum-cured, medical grade silicone designed for comfort and
performance. Our unique blend of silicone, Vitamin E, and skin conditioners results in a pleasing surface that
is non-greasy, non-tacky, and comfortable against the skin. The Alpha Silicone Liner uses Select fabric that
controls pistoning without using a distal matrix. The Select fabric allows for circumferential stretch making it
easy to don for numerous limb shapes. The flexible knee panel provides enhanced knee flexion and a broad
range of knee motion. The Alpha Silicone Liner may be retrofit with Alpha Hybrid Liners with a progressive
profile. Sold each. From WillowWood.
Note: Accordion distal umbrella sizes change with each size liner. Size Medium Plus 3 is available upon request.
It is designed to retrofit patients that are near the upper limit of the Medium Plus size range.
9mm distal, 6mm anterior, 2.5mm proximal and posterior for knee flexion
Size
Medium 1
Medium 2
Med Plus 1
Med Plus 2
Large 1
Large 2
Prox. Circ 26-44cm29-44cm30-54cm 33-54cm33-64cm 36-64cm
1
Distal Circ 220-24cm24-29cm20-24cm24-29cm28-32cm 32-36cm
Locking
S352-6590-1 S352-6590-2 S352-6594-1 S352-6594-2S352-6596-1 S352-6596-2
Cushion
S350-6590-1 S350-6590-2 S350-6594-1 S350-6594-2S350-6596-1 S350-6596-2
1
PROSTHETICS
c.
735
Alpha® Hybrid Liner
The Alpha Hybrid Liner allows for easy bending and flexing of the knee, controlled pistoning, and easy
donning. It’s Hybrid Gel is perfectly paired with a one-way stretch fabric that effectively controls pistoning
without incorporating a distal matrix. This fabric, engineered exclusively for WillowWood, allows circumferential stretch, yet maintains liner elongation within specified limits. A flexible panel incorporates an
abrasion-resistant fabric allowing the limb to easily flex without pulling and tightening at the knee. This
panel and the thin gel behind the knee allows for comfort while sitting or bending for extended periods of
time. A new socket should be fabricated for best use of the Alpha Hybrid Liner with progressive gel style.
The Alpha Hybrid Liner with uniform gel style is a solution for amputees currently wearing a 6 mm uniform
Alpha Classic Liner with Original fabric and who want to experience the benefits of this new liner. Light Gray/
Gray color. Sold each. From WillowWood.
Progressive Gel
9mm distal, 6mm anterior, 2.5mm proximal and posterior for knee flexion
Size
Small
Medium
Medium Plus
Large
Large Plus
Extra Large
Prox. Circ 19-30cm 26-46cm 30-54cm 33-64cm41-80cm 46-90cm
1
Distal Circ214-22cm 20-32cm 20-32cm 28-36cm32-47cm 37-55cm
Locking
H352-6393
H352-6390 H352-6394 H352-6396H352-6398 H352-6397
Cushion
H350-6393
H350-6390 H350-6394 H350-6396H350-6398 H350-6397
Uniform Gel
6mm distal/anterior, 3mm posterior for knee flexion
Size
Small
Medium
Medium Plus
Large
Large Plus
Extra Large
Prox. Circ 20-27cm 23-36cm 33-50cm 36-55cm40-60cm 43-65cm
1
Distal Circ 2 15-22cm 18-26cm 20-28cm 25-33cm28-40cm 33-45cm
Locking
H351-6393
H351-6390 H351-6394 H351-6396H351-6398 H351-6397
Cushion
H350-5363
H350-5360 H350-5364 H350-5366H350-5368 H350-5367
d.
1
Alpha® Classic AK Liner
Size
Medium Plus
Prox. Circ1
Distal Circ2
Large
Large Plus
Extra Large
30-54cm 33-64cm41-80cm 46-90cm
20-32cm 25-36cm32-47cm 37-55cm
1
Style
Locking
Locking
Cushion
Cushion
Fabric
Spirit
MAX
Spirit
MAX
AKL-2634-XAKC-2634-E AKC-2834-X
M+
N/A
M+ w/Small Umbrella*
N/AAKL-2835-XN/A
L
N/A
AKL-2636-XAKC-2636-E AKC-2836-X
N/A
L+
N/A
AKL-2638-XAKC-2638-E AKC-2838-X
XL
N/A
AKL-2637-XAKC-2837-E AKC-2837-X
XL w/Extra Large Umbrella*
N/AAKL-2837-XN/A
N/A
*Non-stock item with 3-day lead time.
PROSTHETICS
Classic AK Liners with the AK Profile accommodate the often sensitive areas of transfemoral residual limbs
with a specific gel style and the incorporation of skin-friendly, mineral-oil-based classic Alpha Classic Gel. The
liner, offered in cushion and locking, has 9 mm of gel distally, tapering to 3 mm proximally—with a built-in
gel pad to protect the often-sensitive femur. This extra gel pad provides a total of 9 mm of gel at the distal
lateral aspect of each liner. The Alpha Spirit Fabric used for Alpha Classic AK Cushion Liners is unique in its
ability to flex during donning or doffing. Alpha Classic AK Cushion Liners may be used with a Velcro® -like
material for added security and are heat moldable for easy stretching. Buff color. Sold each. From WillowWood.
736
P r os t h e t ics
LINERS —
Continued
a.
Alpha® Hybrid AK Liner
The Alpha Classic AK Liner with Symmetrical Profile has 9 mm gel distally and tapers to 2.5 mm gel at the
anterior and posterior. The symmetrical design allows the liner to be rotated for extended wear. This profile
is a good choice for amputees who reflect liners for greater comfort at the socket brim line. The Select Fabric,
only offered with the Symmetrical Profile, is a one-way stretch fabric that controls pistoning yet remains easy
to don. Heat moldable for easy stretching. Dark gray color. Sold each. From WillowWood.
Size
Medium Plus
Prox. Circ1
Distal Circ2
Locking
Cushion
Large
Large Plus
Extra Large
30-54cm 33-64cm41-80cm 46-90cm
20-32cm 25-36cm32-47cm 37-55cm
H442-1494H442-1496H442-1498 H442-1497
H440-1494H440-1496H440-1498 H440-1497
1
GEL SHEATHS
b.
Skin Reliever Gel Sheath
The ALPS™ Skin Reliever eliminates shear forces, friction, and prevents abrasions on the skin of the stump. It
has both superior comfort and durability combined. It also accommodates volume fluctuations over the life
of the prosthesis. There is superior elongation for very little compression against the skin. There is no need
to make a new socket, ALPS™ Skin Reliever can be worn under silicone, gel, and pelite liners. Tapered from
3mm to 1.5mm. Sold each. From ALPS.
Fits Circumference*
16-20cm
21-28cm
28-31cm
Item No. ð
ENCP-16ENCP-20
PROSTHETICS
c.
ENCP-28
Angel Prosthetic Gel Sock
The Angel Prosthetic Gel Sock combines the ComforGel™ core with the advanced fiber technology of CoolMax®
with moisture wicking capabilities, and X-Static® —the Silver Fiber™ with natural anti-microbial properties
that reduce odor causing bacteria. Rugged nylon outer shell. Exceptional stretch in both length and width
conforms to irregular shapes. Soft fleeced interior. Sold each. From Comfort Products.
Sock Length
12” Length
14” Length
16” Length
18” Length
20” Length
ANGELY ANGELY14ANGELY16ANGELY18ANGELY20
9” Gel
9” Gel w/Hole
ANGELY3 ANGELY143ANGELY163ANGELY183ANGELY203
12” Gel
ANGELY12 ANGELY14/12ANGELY16/12ANGELY18/12ANGLEY20/12
12” Gel w/Hole
ANGELY123 ANGELY14/123ANGELY16/123ANGELY18/123ANGLEY20/123
ANGELY12 ANGELY14FDANGELY16FDANGELY18FDANGELY20FD
Full Gel
Full Gel w/Hole
ANGELY123 ANGELY14FD3ANGELY16FD3ANGELY18FD3ANGELY20FD3
PROSTHETICS
d.
737
ComforGel™ Sheath
Combines the benefits of a traditional sheath with the comfort offered by gel for below knee applications.
Specially formulated gel impregnated with medical grade mineral oil helps keep skin healthy. Conforms to
irregular shapes. Approximate 3 ply thickness. 14” overall length with 9” of gel. One size fits most BK amputees. Sold each. From Comfort Products.
Item No. ð
CGELSH
e.
Silosheath™
Provides optimal range of motion and comfort. Skin-friendly mineral oil gel helps prevent abrasion and skin
breakdown. May be used alone or with other interfaces. Three styles: 2-ply Original features 2mm of gel inside
the nylon sheath; Double Cushion features 3mm of gel and extra gel at distal end; 3-ply Extra Life features
2mm of gel between two nylon sheaths. Sold each. From Silipos. See page 545 for child size Silosheath™.
Size
Gel Length
Length
ShortShort
Medium
Medium
LargeLargeLarge
NarrowRegularNarrowRegularNarrowRegular Wide
10” (25cm) 10” (25cm) 13” (33cm) 10” (25cm) 13” (33cm) 13” (33cm) 13” (33cm)
38-43cm38-43cm43-48cm43-48cm46-53cm46-53cm46-53cm
Prox Circumf
18-30.5cm
20-35.5cm
Distal Circmf
18-27cm
20-32cm
20-35.5cm 23-40.5cm 23-40.5cm
20-32cm
23-35.5cm
23-35.5cm
28-46cm
30.5-53cm
28-41cm
30.5-48cm
Original
13325133351334513355133651337513385
Double Cushion
13425134351344513455134651347513485
Extra Life
13825138351384513855138651387513885
DISTAL CUSHIONS and VOLUME MANAGEMENT
f.
Padsil Silicone Distal Pad
Circumference*
Item No. ð
14-19cm
20-23cm
28-31cm
32-35cm
PDS-S PDS-M PDS-L PDS-XLPDS-XXL
g.
24-27cm
*Measurements taken 6cm from dista end.
PROSTHETICS
The Padsil was developed to increase patient comfort in combination with ALPS™ liners. By increasing distal
pressure and enhancing vascular function in distal tissues, the more active user will appreciate the additional
cushioning, softness, and durability. Users who experience volume changes will also appreciate the Padsils
ability to lift the limb back into the proper position. They can be placed at the bottom of the socket or inside
a pin locking liner. Sold each. From ALPS.
Distal Cushions
Silicone cushions in multiple sizes and shapes create an intimate fit between lock and liner. Helps ensure that
the pin is seating completely with zero play, and offer extra cushion on the distal end. From Coyote Design.
Size
For Silicone Liner
For Gel Liner
Small
Medium
Large
Set of 4
CD112SSCD112MSCD112LS
CD112
CD112SGCD112MGCD112LG
CD112
738
P r os t h e t ics
DISTAL CUSHIONS and VOLUME MANAGEMENT — Continued
a.
Silicone Gel Distal End Pad
Made of pure, soft silicone gel and designed to provide added distal cushioning and support when worn
inside a gel liner. Circular, 3/8” thick at center, gradually tapering to the outer edges. Available in five sizes.
Sold each. From ESP.
Diameter
1-3/4”
2”
2-1/8” 2-15/16” 2-3/4”
3.5”
4.5”
(4.45cm) (5.08cm) (5.39cm) (5.87cm) (6.98cm) (8.9cm) (11.4cm)
Item No. ð
5.5”
(14cm)
ESP-DPXSESP-DPS ESP-DPM ESP-DPLESP-DPXLESP-DP1 ESP-DP2 ESP-DP3
b.
Silicone Gel Disc
Made of pure, soft silicone gel and designed to be worn in any area inside a gel liner for added cushioning,
compression or to relieve volumetric changes. Circular, 4mm thick at center, gradually tapering to the outer
edges. 4” diameter. Sold each. From ESP.
Item No. ð
ESP-GD
c.
Mineral Oil Gel Roll-On™
For use under urethane or silicone liner or at nighttime for skin conditioning and scar management. Soft,
conformable, all mineral oil gel. Rolls onto distal limb for enhanced socket liner fit and volume control. Melds
with other Silipos gel products. May be trimmed to fit. Approximately 2mm gel thickness. 6” length. Wash
with mild soap and water. 2 per package. From Silipos.
Size
Narrow
Medium
Wide
Circumference
7.25” (18.5cm)
8.5” (21.5cm)
9.25” (23cm)
Item No. ð 149514961497
d.
Alpha® Gel Cup
Provides an additional 3mm of gel to the distal end of residual limb. Sold each. From WillowWood.
PROSTHETICS
Size
Small
Medium
Large
X-Large
Item No. ð ALA-CS-1 ALA-CM-1ALA-CL-1 ALA-CX-1
e.
Alpha® Volume Management Pad
Used between the limb and the liner in areas where volume has been lost. Made of the same skin-friendly
gel used in Alpha® liners. Each pad is 3mm thick and can be stacked on top of each other. Three sizes. 3 per
package. From WillowWood.
Size
Small
Medium
Large
Item No. ð
ALA-VM-SMALA-VM-MDALA-VM-LG
One of Each
ALA-VM
PROSTHETICS
f.
739
Alpha® Socket Pads
Fabric covered pads used inside the socket to relieve pressure points or sensitive areas. Four shapes. Sold in
sets of four. From WillowWood.
Shape
Circular
6mm Thickness
ALA-S6 ALA-S7 ALA-S8ALA-S9 ALA-S0
Oval, Small
Oval, Large
Tear Drop
One of Each
12mm Thickness
ALA-S1 ALA-S2 ALA-S3ALA-S4 ALA-S5
g.
Memory Foam Distal Cushion
Instead of using different shapes to create an intimate fit, use a Memory Foam Distal Cushion to fill the gap
between the liner and the lock. These cushions help ensure proper seating and keep the lock from being in
between clicks. A cushion is glued to the end of the liner using a unique adhesive, some liners need to be
rough on the distal end for adhesive. If using Air-lock, a distal cushion is rarely needed, but when needed, the
memory foam cushions are the best choice. 3 per package. Adhesive included. Sold set. From Coyote Design.
Item No. ð
CD112MF
h.
Secure-Ring System (SRS®)
Enhance suction and/or mechanical suspension of your prosthetic liner in minutes with the Secure-Ring System. Available in 2mm and 4mm thickness. Multiple rings may be used. Bonding adhesive included. From ESP.
Individual Rings
Fits 14-22cm
Fits 22-30cm
Fits 30-39cm
Fits 38-46cm
2mm Thickness
ESP-SRS-2A
ESP-SRS-2BESP-SRS-2C ESP-SRS-2D
4mm Thickness
ESP-SRS-4A ESP-SRS-4BESP-SRS-4C ESP-SRS-4D
Description
Item No.ò
4 Rings (1 of each size A-D, 2mm)
ESP-SRS-2
4 Rings (1 of each size A-D, 4mm)
ESP-SRS-4
8 Rings (1 of each size A-D, 2mm and 1 of each size A-D, 4mm)
ESP-SRS-1
i.
Mini Expulsion Valve
PROSTHETICS
VALVES
Sold each. From ALPS.
Item No. ð
MV009
LMV-009
Laminating Mini-Valve Kit
74 0
P r os t h e t ics
VALVES — Continued
a.
CTFV Valve
Centri’s popular design. Sold each.
Item No. ð
721000040
b.
CTFV-CSF Valve
Based on the CTFV valve, the CTFV-CSF valve is specifically designed to be used with thermoplastic sockets
and allows you to connect the socket to the frame. Features a knurled interior valve housing which prevents
turning. From Centri.
Item No. ð
721000039
721000041
Interior Valve House721000044Black Valve Gasket
721000042 Exterior Valve House Ring
721000045
Silicone Valve Gasket for CSF
721000043
Valve721000050Dummy
c.
CSS Valve Kit with Lamination Washer
One-way expulsion valve creates suction when amputee stands or walks. Excellent suspension when used
with suspension sleeve. Kit includes parts listed separately. From Centri.
Item No. ð
721000089
721000090
CSS Valve Only
721000091 Lamination Housing Only
721000095 Filter for CSS Valve
d.
CSS-R Valve Kit
PROSTHETICS
Same function as the CSS Valve but pulls open to break suction. Excellent choice with seal-in designs. Kit
includes parts listed separately. From Centri.
Item No. ð
721000086
721000085
CSS-R Valve Only
721000091 Lamination Housing Only
721000087 Tool for CSS-R Valve
e.
Mini Valve for Vacuum Sockets
Ideal for use with cushion liners with suspension sleeve for BK and knee disarticulation amputees. Sold each.
From Centri.
Item No. ð
721000060
PROSTHETICS
f.
741
CQL™ Auto Expulsion Valve
The CQL™ Auto Expulsion Valve can be retrofit or used with new fabrication tooling for easy installation in
new sockets. The built-in auto expulsion quietly expels air all day with no fuss. From Coyote Design.
Item No. ð
CD105
CD103WH
Lock Wrench
g.
Lyn Valve BK and BK2
Designed for transtibial suction sockets, the Lyn Valve BK and BK2 (push button release) are auto expulsion
valves that release air at 0.5 psi without adjustment. 7/8” diameter. New or retro-installation outside of socket.
Threaded housing available for installation into thermoplastics. Sold each. From ESP.
Description
Standard
Metric
BK
PA0200
PA0200M
BK2 (Push Button Release)
PA0202
PA0202M
PA0222Threaded Housing only, standard
PA0222M Threaded Housing only, metric
PA-LVD
Lyn Valve Diaphragm
h.
Lyn Valve RV
Designed for transfemoral applications, the Lyn Valve RV offers guaranteed reliability with no holes in valve
body to clog or trap skin. Releases air at 0.5 psi without adjustment. From ESP.
Description
Item No.ò
Auto Expulsion
PA0002
Manual Expulsion
PA0300
PA0120
Insert Only, Auto Expulsion
PA0002/PI
Solid Plug Insert
PA0301
Insert Only, Manual Expulsion
PA0002/P
Solid Plug Kit
PA0002/D
Molding Dummy KitPA0002/WWrench
i.
Flex Connect System
PROSTHETICS
Eliminates the need for Velcro and rivets. Use with the Lyn Valve RV to lock your prosthetic sockets. This option creates a clean and secure connection between flexible socket and support frame. Sold kit. From ESP.
Item No. ð
PA0050
PA0050/DMolding Dummy Kit
j.
Lyn Valve RV Slide™
A compact suction socket valve with reliable auto expulsion that has the added feature of maintained, handsfree open operation. Simply slide the operator button in any direction and the valve stays open eliminating
back-pressure for easy prosthetic donning and doffing. Audible “click” indicates manual operation. Use for
both AK and BK applications. Thermoplastic or lamination. Sold each. From ESP.
Item No. ð
PA0400
PA0400/D
Molding Dummy Kit
74 2
P r os t h e t ics
a.
High Vac Barb
For use with High Vac Socket Systems and/or vacuum assisted donning. Installs directly into socket wall for
easy access by either retrofitting to pre-existing hard sockets or with use of pre-threaded housing for thermoplastic socket designs. Unique “swivel-stay” feature facilitates easy vacuum hose connection and a 90°
angle for low profile seating on socket surface. Internal safety shut-off valve prevents loss of vacuum if hose
becomes cracked or disconnected from barb. Sold each. From ESP.
Item No. ð
PA0090
PA-PWSI-HPre-threaded Housing
b.
Pee Wee® Valve SI
Manually operated valve with high airflow capacity. Designed for upper limb sockets. Small and rugged,
low profile design—only 9/16” diameter, 1/4” height. New or retro-installation outside of socket. Threaded
‑Housing available installation into thermoplastics. Sold each. From ESP.
Item No. ð
PA-PWSI
PA-PWSI-HPre-threaded Housing
c.
SFS Valve (Scandinavian Flexible Socket)
Features low profile for improved cosmesis, deep undercut with vacuum channels and Delrin fabricated
housing. Sold each. From Fillauer.
Description
Item No.ò
SFS Valve, Non-Adjustable Leak Rate with Housing and Adhesive Coating
807488
SFS Valve, Non-Adjustable Leak Rate with Housing
807487
SFS Valve, Adjustable Leak Rate with Housing and Adhesive Coating
807480
SFS Valve, Adjustable Leak Rate with Housing
807479
PROSTHETICS
807461Valve only, Non-Adjustable Leak Rate
807453
Valve only, Adjustable Leak Rate
807388
Housing only
d.
Leak-Rate Total Contact Valve
Permits controlled rate of airflow through valve when amputee stands or walks, allowing noiseless expulsion
of air from socket. Unique nylon ball-check provides one-way air flow adjustable by an external screw. Once
properly adjusted, no further adjustment is required. Supplied in two lengths. Aluminum; 1-1/4” (3.2cm)
diameter. Sold each. From Hosmer.
Description
Item No.ò
Model TCV-400L, 1” (2.5cm) Length
51981
Model TCV-400S, 1/2” (1.3cm) Length
51982
52001
Insert Only for TCV-400L
52002 Insert Only for TCV-400S
PROSTHETICS
e.
743
Red Dot Air Expulsion Valve
Red dot push button release. Aluminum body measures 7/8” (2.2cm) length. 1.25” (3.2cm) diameter. From
Hosmer.
Item No. ð
51936
51951
Model TCV-150, Insert Only
f.
Plastic and Aluminum Screw-In Suction Valve
Includes aluminum housing and Delrin® insert with neoprene seals. Housing is 7/16” long to permit use in
walled socket. Easy to manipulate large valve release button. 1.25” (3.2cm) diameter. 7/16” (1.1cm) length.
Item No. ð
51971
51980
Model TCV-350, Insert Only
g.
Thermo Valve
Designed to withstand heat during thermoplastic molding. Vacuum holes ensure positive connection between valve body and socket. 1-5/16” diameter body (1-1/2” diameter flange); 7/8” (2.2cm) long. Sold each.
From Hosmer.
Item No. ð58190
51970Model TCV-250S Insert only
h.
One-Way Expulsion Valve
This valve is incredibly low profile, ultra lightweight and quiet. 1mm build height. Weighs less than 1/10 of
an ounce. Features an integrated filter. Sold in various size packs. From KISS.
PROSTHETICS
Description
Single Valve
10/Pkg
30/Pkg
Item No. ð
CMP19/ACMP19/B CMP19/C
CMP20/A
Reduced Shank Drill Bit
i.
Push Button Valve
This very popular push-type manual expulsion valve is available with aluminum, stainless steel or Delrin®
housing with double O-ring. From Laurence Manufacturing.
Description
Item No.ò
with Aluminum Housing
A100
with Stainless Steel Housing
A120
with Delrin Housing w/Double O-Ring
A147
®
A123
Housing Only, AluminumA125Insert Only
A122 Housing Only, Stainless Steel
A320-LO O-Ring for Delrin® Housing, 6/pkg
A149 Housing Only, Delrin® w/Double O-Ring
74 4
P r os t h e t ics
a.
Air Expulsion Valve
Available with aluminum, stainless steel or Delrin® housing with double O-ring. Sold each. From Laurence
Manufacturing.
Description
Item No.ò
with Aluminum Housing
A151
with Stainless Steel Housing
A157
with Delrin® Housing w/Double O-Ring
A158
A123
Housing Only, AluminumA154Insert Only
A122 Housing Only, Stainless Steel
A320-LO
O-Ring for Delrin® Housing, 6/pkg
A149 Housing Only, Delrin® w/Double O-Ring
b.
Green Dot Total Contact Suction Valve
Available in aluminum and stainless steel. For laminating. Valve housing measures 0.4” (10.8mm) from bottom
of O-ring to top of thread. 0.9” (22mm) diameter at base of valve. Adjustable or non-adjustable leak rate.
Valve key and dummy included with valves. Sold each. From Trulife.
Description
Item No.ò
Non-Adjustable, Aluminum
P123501000
Adjustable, Aluminum
P123502000
Non-Adjustable, Stainless Steel
P123201000
Adjustable, Stainless Steel
P123202000
20281
2460020000
P123301000
c.
Housing Only, Aluminum
Housing Only, Stainless Steel
Insert Only, Non-Adjustable
P123302000
T156000000
Insert Only, Adjustable
Valve Key, Large
Green Dot Total Contact Suction Socket Valve
Plastic. For Thermoforming. Valve housing measures 0.4” (10.8mm) from bottom of O-ring to top of thread.
0.9” (22mm) diameter at base of valve. Adjustable or non-adjustable leak rate. Valve key included with valves.
PROSTHETICS
Description
Non-Adjustable
Adjustable
Item No. ð
P123101000P123102000
2460010000Housing OnlyP123302000
P123301000
T156000000 Valve Key, Large
d.
Green Dot SFS Valve
Plastic. For Thermoforming. Valve housing measures 0.4” (10.8mm) from bottom of O-ring to top of thread.
0.9” (22mm) diameter at base of valve. Adjustable or non-adjustable leak rate. Valve key included with valves.
Description
Non-Adjustable
Adjustable
Item No. ð
P123401000P123402000
P20384Housing OnlyP123302000
P123301000
T156000000 Valve Key, Large
PROSTHETICS
e.
745
Green Dot Super Seal® Valve System
A unique double O-ring valve system for thermoforming. Trulife has taken the popular Green Dot valve and
developed a new housing and application technique that provides a secure, leak-free system for vacuum
formed sockets. The Green Dot Super Seal valve system is available in plastic, aluminum and stainless steel;
adjustable or non-adjustable leak rate. Valve housing measures 3/8” (9.5mm) from bottom of O-ring to top
of thread. 11/16” (17.5mm) diameter at base of valve. Valve key, dummy and fabrication clamp included with
valves. Sold each. From Trulife.
Description
Item No.ò
Plastic, Adjustable P123902000
Aluminum, Non-Adjustable
P123701000
Aluminum, Adjustable
P123702000
Stainless Steel, Non-Adjustable
P123801000
Stainless Steel, Adjustable
P123802000
11278
11276
11277
f.
Housing Only, Plastic
Housing Only, Aluminum
Housing Only, Stainless Steel
P123301000
P123302000
Small Suction Socket Valve
Plastic. Push-Pull type. Two-part housing for thermoforming. Valve housing measures 0.4” (9.7mm) from
bottom of O-ring to top of thread. 0.6” (15.8mm) diameter at base of valve. Adjustable or non-adjustable
leak rate. Valve key included with valves. Sold each. From Trulife.
Description
Non-Adjustable
Adjustable
Item No. ð
P190000003P190000002
g.
20326Housing OnlyT132000001
Small Forming Tool
10221
T156000001 Valve Key, Small
DISCON
Small Suction Socket Valve
Aluminum housing. One-part housing for laminating. Valve housing measures 0.4” (9.7mm) from bottom
of O-ring to top of thread. 0.6” (15.8mm) diameter at base of valve. Adjustable or non-adjustable leak rate.
Valve key included with valve. Sold each. From Trulife.
PROSTHETICS
Description
Non-Adjustable
Adjustable
Item No. ð
P190000006P190000005
20328Housing Only10220Insert Only, Adjustable
10221
T156000001 Valve Key, Small
h.
Small SFS Valve
Plastic. One-part housing for thermoforming. Valve housing measures 0.4” (9.7mm) from bottom of O-ring
to top of thread. 0.6” (15.8mm) diameter at base of valve. Adjustable or non-adjustable leak rate. Valve key
included with valves. Sold each. From Trulife.
Description
Non-Adjustable
Adjustable
Item No. ð
P190000009P190000008
20276Housing Only
T156000001
Valve Key, Small
74 6
P r os t h e t ics
BK Valve
a.
An expulsion valve suitable for installation in distal BK sockets for use with suction suspension. Requires
minimum of 3/4” distal socket thickness for mounting in countersink hole (typically a laminated socket on
an attachment block). After drilling through the block from the distal end using a 5/16” drill bit, the hole is
countersunk from inside the socket with the countersink (T36201). Valve is then inserted using the valve key
(T36200). Valve Kit includes valve, adapter, dummy and valve key. From Trulife.
Description
Item No.ò
BK Valve Only
P36110
BK Valve Kit with Regular 4-Ear Pyramid, Stainless Steel
DISCON
BK Valve Kit with Regular 4-Ear Pyramid, Titanium
P36101
BK Valve Kit with Large 4-Ear Pyramid, Stainless Steel
P36102
BK Valve Kit with 3-Prong Dome Adapter
P36104
T36201Countersink
T36200
BK Valve Key
LOCKING DEVICES
Lock Series 200
b.
Suitable for thermoplastic and laminated sockets, the Lock Series 200 features a light, flat construction, rotation secured laminating disc and aluminum housing. Easy cleaning and replacing of complete locking unit is
possible without dismantling the prosthesis. Dummy included. Sold kit. From Euro International.
Description
Clutch-Lock
Shuttle-Lock
Easy-Lock
Product Weight
188g
172g
178g
10S1
Item No. ð
10S110S2 10S3
PROSTHETICS
10S2/E335 10S2/E350 10S2/E360 10S2/E335
10S2/E350
Geared Pin, 35mm
Geared Pin, 50mm
Geared Pin, 60mm
Rastered Pin, 35mm
Rastered Pin, 50mm
10S2/E360
10S3/E335
10S3/E350
10S3/E360
Rastered Pin, 60mm
Plain Pin, 35mm
Plain Pin, 50mm
Plain Pin, 60mm
10S2
10S3
PROSTHETICS
c.
747
ALPSLock™ with Pyramid
The ALPSLock™ S498-P features a smooth gear mechanism, durable glass reinforced nylon lock body, infinite
pin adjustment, quiet operation, convenient side mounted release button and removable gear housing. Includes integrated pyramid. S498-P must be used with laminated socket. Rated to 220 lb (100kg). From ALPS.
Item No. ð
S498-P
FAB-946Fabrication KitLDP-695Serrated Pin
LDB-899P
Body w/PyramidLDA-694Hex Nut Adapter
LDH-694A
Locking MechanismLDD-694ADummy Plug
d.
ALPSLock™ with 4-Hole Plate
The ALPSLock™ S496-T features a smooth gear mechanism, durable glass reinforced nylon lock body, lightweight, infinite pin adjustment, quiet operation, convenient side mounted release button and removable
gear housing. Universal pin can be used with all types of liners. No weight limit. Includes 4-Hole Universal
Mounting Plate. From ALPS.
Item No. ð
S496-T
UMP-496
PlateLDA-694Hex Nut Adapter
LDH-694A
e.
ALPSLock™ (No Attachment)
The ALPSLock™ S496-W features a smooth gear mechanism, durable glass reinforced nylon lock body, lightweight, infinite pin adjustment, quiet operation, convenient side mounted release button and removable
gear housing. Universal pin can be used with all types of liners. No weight limit. From ALPS.
Item No. ð
S496-W
LDB-694A
BodyLDA-694Hex Nut Adapter
LDH-694A
UMP-496 Universal Mounting Plate
APC Shuttle Lock Kit
Rated to 365 lbs. 2 year warranty. Kit includes push lock with medium length release pin (63mm diameter x
25mm height), locking pins with 10mm thread, O-rings, retaining washers, screws and tube of Loctite® 242.
Description
Small Pin
Medium Pin
PROSTHETICS
f.
Long Pin
Item No. ð
LOC-APC-1SM LOC-APC-1MEDLOC-APC-1LONG
LOC-APC-1.00-PINReplacement Pin, short
LOC-APC-1.75-PIN
Replacement Pin, medium
LOC-APC-2.50-PIN
Replacement Pin, long
74 8
P r os t h e t ics
LOCKING DEVICES — Continued
ProAdvantage® Attachment Kits
ProAdvantage® has been the industry leader for over a decade. And now the best lock on the market just got
better. All 650 and 600 kits now feature ClickLock™—an audible locking mechanism that enhances patient
safety and security by providing an audible click when properly engaged. The geared clutch assembly assures
the patient cannot inadvertently release suspension. Each attachment kit is manufactured to precise specifications. Components have been tested and CE certified in accordance with applicable structural tests for lower
limb prostheses. Kits include body, laminating or thermoplastic ring or sleeve, tooling, pin and hardware.
ProAdvantage® Attachment Kits at a Glance
Item No.
Description
Dimensions/Weight
IRS-650-AK-L
Modular Clutch Lock w/ClickLock™ Aluminum Body, Stainless Steel Liner
For use in Lamination Applications
L 2-7/8” x W 2” x H 3/4”
116g
IRS-650-AK-T
Modular Clutch Lock with ClickLock™ Aluminum Body, Stainless Steel Liner
For use in Thermoplastic Applications
L 2-7/8” x W 2” x H 3/4”
116g
IRS-600-AKTP
Clutch Lock with ClickLock™
Aluminum Body, Titanium Liner,
Titanium Pyramid
For use in Lamination, Thermoplastic
or Exoskeletal Applications
L 2-3/4” x W 1-3/4” x H 2-1/2”
192g
IRS-600-AKT
Aluminum Body, Titanium Liner
L 2-3/4” x W 1-3/4” x H 1-5/8”
144g
PROSTHETICS
IRS-600-AK
L 2-7/8” x W 1-3/4” x H 1-5/8”
Delrin® Body
105g
IRS-200-AK
Ratchet Lock
IRS-150-AKDelrin® Body
L 2-1/2” x W 1-5/8” x H 1-5/8”
91g (200), ??? (150)
a.
ProAdvantage® Attachment Kit 650
Kit includes laminating ring (AK-L) or thermoplastic ring (AK-T), body, body mounting screws, modular mounting screws, spacers, tooling, 10mm pin and T-wrench. Instruction pamphlet also included.
Description
Item No.ò
Lamination
IRS-650-AK-L
Thermoplastic
IRS-650-AK-T
IRS-650-LRLaminating RingIRS-650-SPACERS
Spacers (4)
IRS-650-TPRThermoplastic RingIRS-650-TTooling (includes IRS-650-TS)
IRS-650-BBodyIRS-650-TSTooling Centering Screw
IRS-650-BMS
Body Mounting Screws (4)
IRS-600-API-RPC Pin, 10mm x 2-3/4”
IRS-650-MMS
Mounting Screws (4)
IRS-650-W
T-Wrench
IRS-600-PSWPin SealIRS-650-LRRound Aluminum Laminating Ring
PROSTHETICS
b.
749
ProAdvantage® Attachment Kit 600-AKT and 600-AKTP
Kit includes body, tooling, 10mm pin, T-wrench, Delrin® laminating sleeve and hex wrench. Instruction pamphlet also included.
Item No.ò
Description
Standard
IRS-600-AKT
with Titanium Pyramid (pictured)
IRS-600-AKTP
IRS-600-BTBody (AKT)IRS-650-WT-Wrench
IRS-600-BTP
Body w/Pyramid (AKTP)
IRS-600-LS
Delrin® Laminating Sleeve
IRS-200-TToolingIRS-600-LW
Hex Wrench
IRS-600-C
ClickLock Cartridge
IRS-600-PB
Push Button for ClickLock
IRS-600-CW Cartridge Wrench
IRS-600-ELB
Extended Length Button
c.
ProAdvantage® Attachment Kit 600-AK
Item No. ð
IRS-600-AK
IRS-600-BBodyIRS-650-WT-Wrench
IRS-200-TToolingIRS-600-LSDelrin® Laminating Sleeve
IRS-600-LW Hex Wrench
IRS-600-C
ClickLock Cartridge
IRS-600-PB
Push Button for ClickLock
IRS-600-CWCartridge WrenchIRS-600-PSW
Pin Seal
IRS-600-ELB
d.
ProAdvantage® Attachment Kit 200-AK and 150-AK
Item No.ò
Description
IRS-200-AK
Push Button Kit, Large
Push Button Kit, Small
IRS-150-AK
Optional Components for ProAdvantage® Attachment Kits
650-AK-L 650-AK-T 600-AKT 600-AKTP 600-AK
200-AK
IRS-600-API-RPC 3
10mm, L 68mm
3
3
3
3
IRS-600-AP3-RPC 3
1/4-20, L 68mm
3
3
3
3
IRS-200/500ELB3
3
3
3
3
IRS-500-ELS3
Extended Length Sleeve
3
3
3
IRS-200-ELS3
Extended Length Sleeve
IRS-200-MA33
Modular Adapter Ring
IRS-200-PA33
Pyramid Adapter
PROSTHETICS
IRS-200-BBodyIRS-200-WPin Wrench
IRS-200-TToolingIRS-200-LSDelrin® Laminating Sleeve
IRS-200-API
Pin, 10mm x 3”
IRS-200-SW Sleeve/Washer Adapter
IRS-150-API
Pin, 10mm x 2.125”
IRS-200-C
Catch SS Push Release Kit
IRS-200-PB
Push Button with Stud
IRS-200-SP
Spring Push Release Kit
750
P r os t h e t ics
a.
Air-Lock™
At 97 grams, the Air-Lock™ is ideal for most lower extremity cases, laminated or thermoformed. With a smaller
shape, and at only 51 grams, the Small Air-Lock™ may be used for pediatrics, smaller limb shapes and upper
extremity applications. Both are waterproof, lightweight and suitable for any activity level. Features include
an integrated suction valve, single lamination fabrication, completely replaceable locking mechanism and
acetyl construction for reduced wear and tear. Fast Four Connector allows for easy use in test socket and in
definitive socket. Sold each. From Coyote Design.
Description
Item No.ò
Air-Lock™with Lock Pin
CD103
Air-Lock™with Long Lock Pin
CD103L
Air-Lock™with Lock Pin, Small
CD103S
CD103LP
CD103P6
CD103P9
CD103FF
CD103RBC
CD103WH
CD316A
b.
Air-Lock Lock Plate
Lock Pin Assembly
Lock Pin Assembly, Long
Fast Four Connector
Release Button Cover
Lock Wrench
Casting Handle and Pin
CD103FFLP
CD103AF
CD103MDI
CD103SDI
CD103LFC
CD103SFC
Low Profile Fast Four Connector
Aligned Four Connector
Insert for Alignable Connector
Insert for Align Connector, Single Dir Offset
Large Casting and Fab Dots, 50/bag
Small Casting and Fab Dots, 200/bag
Suction Lock
The Suction Lock is similar to the original Air-Lock but offers some improvements for the practitioner, technician and amputee. It offers improved suspension and reduced pistoning and traction over traditional pin
systems with its patented airtight mechanism. The lock maintains an airtight suction socket regardless of pin
location, as the Air-Lock does. However the new funnel shape, longer standard pin and higher engagement
point of the Suction Lock make donning easier. The new shape also offers a more positive and stable pin
engagement. Suction Lock components are rated to 265 lb. Sold each. From Coyote Design.
Description
Item No.ò
Suction Lock, No Connector
CD113
Scution Lock with Aligned Four Connector
CD113LA
Suction Lock with Fast Four Connector for Thermoforming
CD113TF
Suction Lock with Fast Four Connector for Laminating
CD113LF
PROSTHETICS
CD113AF
Aligned Four Connector
CD112MG
Distal Cushion, 2.45” diameter
CD113FF
Fast Four Connector
CD112SS
Distal Cushion, 2.36” diameter
CD113HG
Housing onlyCD112MSDistal Cushion, 2.75” diameter
CD113P8Pin onlyCD112LSDistal Cushion, 3.15” diameter
CD316
c.
EOVC Lock
The EOVC Lock is very similar to the Air-Lock and Suction Lock in that it stays airtight helping to create “suction” in the socket. The advantage of the EOVC is the design allows it to be used with elevated vacuum. Its
unique lever design also helps make doffing of the socket easy, especially for amputees with hand strength
issues, arthritis, or trouble reaching the release button. Sold each. From Coyote Design.
Item No. ð
CD114
UMP-496
Plate
LDH-694A Locking Mechanism
CD316
PROSTHETICS
d.
751
Modular Shuttle Lock with Delrin Housing
Kit includes housing, shuttle lock assembly and fabrication instructions. Plungers sold separately. From Fillauer.
Description
Item No.ò
Modular Shuttle Lock with Delrin Housing
125459
809780Large Delrin Shuttle Housing809711Shuttle Lock
809782Shuttle Body809756Compression Spring
809784Button Shield809783Guide Screw
809731Latch Pin8800336-32 x 5/16” Socket Head Set Screw
809785Latch Pin Button809787Pe-Lite™ Washer
Shuttle Lock Sub Assembly
809746
809711
Shuttle Lock
880033
6-32 x 5/16” Socket Head Set Screw
Fabrication Kit (Thermoforming and Lamination)
125200
809790
Shuttle Body Dummy
880494
5/16-18 x 3” Socket Head Set Screw
809791
Button Shield Dummy
Plungers
809722
809725
809727
809722mm
e.
Plunger, 1” with 1/4-20 Thread
Plunger, 1.5” with 1/4-20 Thread
Plunger, 1” with M10 Thread
809725mm
809727mm
809720mm
809721mm
Plunger, 1.5” with M10 Metric Thread
Plunger, 2” with M10 Metric Thread
Small Modular Shuttle Lock with Delrin Housing
Description
Standard
Metric
Small Modular Shuttle Lock with Delrin Housing and 1” Plunger
125410125410MM
Small Modular Shuttle Lock with Delrin Housing and 1.5” Plunger
125412125412MM
809810Shuttle Lock Body, Small809816Shuttle Lock
809820Housing809760Compression Spring
809775
Latch Pin Button
809808
PROSTHETICS
809816
Shuttle Lock
880033
125420-FL
809824
Housing Dummy
880488
809791
Button Shield Dummy
Plungers
809826
809827
809826mm
809827mm
752
P r os t h e t ics
a.
Modular Shuttle Lock with Titanium Pyramid
Rated to 300 lb. Kit includes housing, shuttle lock assembly and fabrication instructions. Plungers sold separately. From Fillauer.
Description
Item No.ò
125460-FL
809795Titanium Pyramid Housing809711Shuttle Lock
124183
Lamination Cap
809746
809711
Shuttle Lock
880033
125200
809790
Shuttle Body Dummy
880494
809791
Button Shield Dummy
Plungers
809722
809725
809727
809722mm
b.
809725mm
809727mm
809720mm
809721mm
Modular Shuttle Lock with Cylindrical Housing
Rated to 300 lb. Kit includes housing, shuttle lock assembly and fabrication instructions. Plungers sold separately. From Fillauer.
Description
Item No.ò
PROSTHETICS
125462
809795Cylindrical Housing809711Shuttle Lock
809731Latch Pin8800335/16-18 x 3” Socket Head Set Screw
809746
809711
Shuttle Lock
880033
809866
809865
Fabrication Body Dummy
880494
809791
M6 x 1 x 16mm SHSS Cone Point
Plungers
809722
809725
809727
908722mm
908725mm
908727mm
908720mm
908721mm
PROSTHETICS
c.
753
Modular Shuttle Lock with 4-Hole Housing
Description
Item No.ò
125461
8097924-Hole Shuttle Housing809711Shuttle Lock
880282
Screw, M6 x 1 x 20mm
Fabrication Kit (Lamination)
125204
809790
Shuttle Body Dummy
882610
M6 x 10 Socket Set Screw (4)
809791Button Shield Dummy885215Nut, 5/16-18 Acorn
880494
809798
Jam Screw
809794Flattening Plate809799Jam Screw
Fabrication Kit (Thermoforming)
125202
809790
Shuttle Body Dummy
882610
M6 x 10 Socket Head Set Screw (4)
809791Button Shield Dummy809800Camlock Assembly
880494
809801
Hole Punch
809793
Flattening Plate
Plungers
809722
809725
809727
809722mm
d.
809725mm
809727mm
809720mm
809721mm
Original Shuttle Lock
Sold kit. From Fillauer.
Description
Standard
Metric
Original Shuttle Lock Kit (without Punger)
125229N/A
Original Shuttle Lock Kit with 1” Plunger
125234
125234MM
Original Shuttle Lock Kit with 1.5” Plunger
125232
125232MM
PROSTHETICS
Original Shuttle Lock Kit with 2” Plunger
125237
125237MM
809747Shuttle Lock Body809730Latch Pin Button
125345Button Shield809732Mounting Nut
809712Guide Screw Assembly809757Pe-Lite™ Washer, 3/4”
809731Latch Pin809758Pe-Lite™ Washer, 1”
Fabrication Kit 125239
125314
Threaded Plug, 3/4-16 x 1”
880490
Set Screw, 5/16-18 x 2”
125315Distal Socket Plug885347Hex Key, 1/4”
125348
Plug Screw F/Shield
880928
Threaded Plug Screw, 3/4-16 x 3/8”
Plungers
809722
809725
809727
809722mm
809725mm
809727mm
809720mm
809721mm
754
P r os t h e t ics
a.
Original Shuttle Lock with Unitized Housing
Rated to 220 lb. Sold kit. From Fillauer.
Description
Item No.ò
Original Shuttle Lock with Unitized Housing
125210
809747Shuttle Lock Body809730Latch Pin Button
125345Button Shield124183Lamination Cap
809712Guide Screw Assembly809757Pe-Lite™ Washer, 3/4”
809731Latch Pin809758Pe-Lite™ Washer, 1”
809750Unitized Housing Kit809754Unitzed Housing
125314
Threaded Plug, 3/4-16 x 1”
880490
Set Screw, 5/16-18 x 2”
125315Distal Socket Plug885347Hex Key, 1/4”
125348
Plug Screw F/Shield
880928
Threaded Plug Screw, 3/4-16 x 3/8”
Plungers
809722
809725
809727
908722mm
b.
908725mm
908727mm
908720mm
908721mm
External Clutch Lock
Item No. ð
140100
PROSTHETICS
c.
Cylindrical Lock System
Description
Item No.ò
with 1” Plungers
125240
with 1.5” Plungers
125241
809730Latch Pin Button809873Cylindrical Lock Body
809739
Latch Pin
880285
M6 x 1 x 25mm Flat SHCS (4)
809864
Fabrication Dummy Body
880494
880275
M6-1 x 16mm Socket Head Set Screw 809791
Button Shield Dummy
Plungers
809722
809725
809727
908722mm
908725mm
908727mm
908720mm
908721mm
PROSTHETICS
d.
755
Clutch Lock System with Delrin Housing
Description
Item No.ò
Clutch Lock with Delrin Housing
140000
140002
Delrin Housing
140065 Fabrication Kit for Clutch Lock
140150
Clutch Lock Cartridge w/Air Expulsion 140116 Latch Pin
140065
140060Wrench880488
140061Clutch Housing Dummy881351
Brass Nail
140062
Distal Attachment Dummy
Plungers
140040
140041
e.
140043 Plunger, 2” with M10 Metric Thread
140044 Plunger, 1.5” with M10 Metric Thread
Clutch Lock System with Titanium Pyramid
Description
Item No.ò
Clutch Lock with Titanium Pyramid
140010
140013
Pyramid Housing
140150
124183
Lamination Cap
140065
140060Wrench880488
Brass Nail
140062
Plungers
140040
140041
f.
Clutch Lock System with Cylindrical 4-Hole Housing
Description
Item No.ò
PROSTHETICS
Clutch Lock with Cylindrical 4-Hole Housing
140020
140023
Cylindrical 4-Hole Housing
140150
880282
M6 x 1 x 20mm FHSCS
882613 M6 x 1 x 12mm Socket Head Cap Screw
140065
140060Wrench880488
Brass Nail
140062
Fabrication Dummy Kit (Cylindrical 4-Hole Housing)
140070
140063
Fabrication Dummy
882610 M6 x 1 x 10mm Socket Head Set Screw
140062
Plungers
140040
140041
756
P r os t h e t ics
a.
Gator Grip Lock with Delrin Housing
Description
Item No.ò
141001
141110Delrin Housing141140
Release Rack
141105
Release Assembly with Spring
141142 Button Shield
027827Compression Spring141144
Latch Pin Button
140106
Latch Pin
Lock Mechanism
141100
141110
316 SS 7/32” Ball Bearing (4)
141130 Modular Lock Cartridge Housing, Titanium
141112
316 SS Internal Retaining Ring
141132 Ball Retainer
141114
316 SS Flat Washer
027826 Conical Compression Spring, SS
141120
Gear driven Release Cam
882410 Cam Follower Spacer
141122
Cam Follower Spacer
Fabrication Kit
140020
141190Fabrication Dummy141195
Button Dummy
141192
1.5” Plunger Extension
880494 516-18 x 3” Socket Head Set Screw
141194
2” Plunger Extension
Metric Thread Plungers
141015
141016
141017
b.
Smooth Rigid Plunger, 1”
Smooth Rigid Plunger, 1.5”
141010
141011
141012
Flexible Plunger, 1.5”
Flexible Plunger, 2”
Gator Grip Lock with Pyramid Housing
Description
Item No.ò
PROSTHETICS
141002
141160Pyramid Housing141140
Release Rack
141105
Release Assembly with Spring
141142 Button Shield
027827Compression Spring141144
Latch Pin Button
140106Latch Pin124183
Lamination Dummy for Pyramid Adapter
Lock Mechanism
141100
141110
141112
141114
141120
141122
316 SS 7/32” Ball Bearing (4)
316 SS Internal Retaining Ring
316 SS Flat Washer
Gear driven Release Cam
Cam Follower Spacer
141130
141132
027826
882410
Modular Lock Cartridge Housing, Titanium
Ball Retainer
Conical Compression Spring, SS
Cam Follower Spacer
Fabrication Kit
140020
141190Fabrication Dummy141195
Button Dummy
141192
1.5” Plunger Extension
880494 516-18 x 3” Socket Head Set Screw
141194
2” Plunger Extension
Metric Thread Plungers
141015
141016
141017
Smooth Rigid Plunger, 1.5”
141010
141011
141012
Flexible Plunger, 2”
PROSTHETICS
c.
757
BASE Shuttle Lock
Features versatile cylindrical body with standard 4-hole attachment, serrated pin and deep pin well for easy
insertion. Rated to 220 lb. Sold kit. From ST&G.
Item No. ð
3140
d.
Titanium Shuttle Clutch Lock Kit with Flexible Lamination Connector
Kit includes Titanium Shuttle Clutch Lock Body, Titanium Flexible 3-Prong or 4-Prong Connector, Clutch Lock
Pin and Lamination Dummy. Rated to 300 lb. Sold kit. From TiMed.
Description
Item No.ò
Shuttle Lock Kit with Flexible Titanium 3-Prong Connector and Lamination Dummy
TA-325T-3
Shuttle Lock Kit with Flexible Titanium 4-Prong Connector and Lamination Dummy
TA-325T-4
Shuttle Lock Kit with Flexible Titanium 3-Prong Connector (pictured)
TA-325-3
Shuttle Lock Kit with Flexible Titanium 4-Prong Connector
TA-325-4
A-701Titanium Shuttle Clutch Lock Body, 117g
SS-511-3
Flexible Titanium 3-Prong Connector, 55g
SS-511-4
Flexible Titanium 4-Prong Connector, 55g
A-703
Clutch Lock pin, 21g
T-200
Lamination Dummy
e.
Titanium Shuttle Clutch Lock Kit with Lamination Connector
Kit includes Titanium Shuttle Clutch Lock Body, Stainless Steel 3-Prong or 4-Prong Connector, Clutch Lock Pin
and Lamination Dummy. Rated to 300 lb. Sold kit. From TiMed.
Description
Item No.ò
Shuttle Lock Kit with Flexible Stainless Steel 3-Prong Connector and Lamination Dummy
SS-325T-3
Shuttle Lock Kit with Flexible Stainless Steel 4-Prong Connector and Lamination Dummy
SS-325T-4
Shuttle Lock Kit with Flexible Stainless Steel 3-Prong Connector (pictured)
SS-325-3
A-701Titanium Shuttle Clutch Lock Body, 117g
SS-511
Stainless Steel 3-Prong Connector, 109g
SS-521
Stainless Steel 4-Prong Connector, 145g
A-703
Clutch Lock pin, 21g
T-200
Lamination Dummy
f.
PROSTHETICS
Shuttle Lock Kit with Flexible Stainless Steel 4-Prong Connector
SS-325-4
Modular Master Lock™
A two-part clutch system designed for lamination. Rated to 220 lb. Kit includes Pin, Screws, Laminating Screw,
Laminating Ring. Sold kit. From Trulife.
Item No. ð
P35530
P23273
Master Lock Pin only
18752-002
M6-1.0P x 8mm SHCS, black
P21064
Laminating Screw
18758-001
M6-1.0P x 16mm FHSCS, black
P23280
Laminating Ring
20109-001
Escutcheon Pin 16GA x 5/8, brass
P23282Anchor Plate21545-001Kevlar Hank, 94cm
P23283
Pin Guide Spacer
758
P r os t h e t ics
a.
Aluminum Master Lock™ with Titanium Pyramid
Rated to 220 lb. Product weight 185g. Kit includes Pin, Screws, Conic Laminating Tool and T-Tool. From Trulife.
Item No. ð
P35540
P23273Master Lock Pin only
P13283
Push Button Gear Assembly, large
P23281
Conic Lamination Tool
20102-001 M8-1.2P x 60mm SCHS, black
21545-001 Kevlar Hank, 94cm
20109-001 Escutheon Pin, 16GA x 5/8, brass
b.
Littig Master Lock™
For thermoformed or composite sockets. Rated to 220 lb. Standard 4-hole pattern. Removable. Kit includes
Pin, Screws, Forming Tool, Anchor Plate and T-Tool. Sold kit. From Trulife.
Item No. ð
P35501
P23273Master Lock Pin only
P13282
Push Button Gear Assembly, small
P23274
Screw for Littig Hip Master Lock Cup
P21591
Internal Forming Tool for Thermoplastic System
T25000
Alignment System Tooling, Thermoplastic
T25001
20109-001 Escutcheon Pin 16GA x 5/8, brass
c.
Alpha® Lamination Lock
Small in size, lightweight and can be used in either a one-step or two-step lamination. With the incorporation of an attachment plate in a two-step lamination, various angle options can be utilized to optimize foot
alignment instead of allowing the shuttle lock to dictate alignment. Two pins are included with each lock.
Description
Item No.ò
Standard (pictured)
700-AL600
PROSTHETICS
700-AL601
700-AL602
Lock Mechanism
700-AL603 Attachment Plate
d.
Alpha® Suction Pro
Provides outstanding suction suspension in either thermoplastic or laminated sockets. Features a maintenance-free air expulsion valve, provides additional distal cushioning and can be used on both transtibial and
transfemoral prostheses. Rated to 250 lb (113kg). Requires Lamination Tooling Kit (700-SP110) when used with
a laminated socket. Requires Thermoplastic Tooling Kit (700-SP111) when used with a thermoplastic socket.
One year warranty. From WillowWood.
Description
Item No.ò
Alpha Suction Pro
700-SP100
®
Alpha® Suction Pro with Titanium Pyramid
700-SP101
700-SP300
Valve Kit Only
700-SP110 Lamination Tooling Kit (Reusable)
700-SP111 Thermoplastic Tooling Kit (Reusable)
PROSTHETICS
e.
759
Alpha® Interlock Suspension System
Using the Alpha® Interlock Suspension System, upon installing a single distal adapter into a socket, practitioners gain the ability to interchange suspension methods from a pin lock, a lanyard lock or a suction device
without remaking the socket. The distal adapter can be used in laminated or thermoplastic socket designs.
The system can be used in both transtibial and transfemoral prostheses and is offered in several configurations. The Complete Kit includes three distal adapters plus an Alpha® Lock Body, an Alpha® Lanyard Body, a
Suction Insert Body and a fabrication post. Rated to 250 lb (115kg). One year warranty. From WillowWood.
Description
Item No.ò
Complete Kit
AIS-KIT
System featuring Alpha Lanyard
700-AIS100
System featuring Alpha Lanyard with Titanium Pyramid
700-AIS101
System featuring Alpha Lock
700-AIS480
System featuring Alpha Lock with Titanium Pyramid
700-AIS481
System featuring Alpha Suction Insert
700-AIS500
System featuring Alpha Suction Insert with Titanium Pyramid
700-AIS501
700-AIS102
Distal Adapter 700-AIS482Lock Pin, 1-1/2”
(Includes Fabrication Post)
700-AIS483
Hardware Kit
700-AIS103 Lanyard Attachment Cord
700-AIS484
One-Way Valve
700-AIS104 Fabrication Post
700-AIS486
Suction Insert Body Only
700-AIS105
Forming Plate700-AIS487Poron Filter
700-AIS106 Post Decal Set (10)
700-AIS488
Lock Pin, 2”
700-AIS107
Lanyard Body Only700-AIS489O-Rings (10)
700-AIS108 Lanyard Suction Cup
700-AIS492
Lock Body Only
700-AIS109 Lanyard Power Grip
700-AL490-OLD
Lock Body Only, Old Style
f.
Suction Spacer Plate
The Suction Spacer Plate contains a maintenance-free expulsion valve and is used for converting any socket
with a 4-hole pattern into a suction socket. 3/8” (9.5mm) thick. Product weight 36g. The Suction Spacer Plate is
available by itself or as one of several kits with a 4-hole component. Rated to 250 lb (113kg). From WillowWood.
Description
Item No.ò
Suction Spacer Plate Only
700-SP500
with Titanium Pyramid Receiver
700-SP501
700-SP502
700-SP503
700-SP504
with 10mm Offset Composite Pyramid
700-SP505
PROSTHETICS
with Aluminum Slide Pyramid
with 5mm Offset Composite Pyramid
g.
Suction Pyramid
Recommended for laminated sockets, the Suction Pyramid incorporates a one-way air expulsion valve within
a 4-hole pyramid adapter. Available in stainless steel or titanium, the Suction Pyramid can be purchased by
itself or in a kit with a laminated socket attachment block. Rated to 250 lb (113kg). From WillowWood.
Description
Item No.ò
Kit, Stainless Steel
700-SP460
Stainless Steel
700-SP461
Kit, Titanium
700-SP470
Titanium
700-SP471
Magnum Titanium 4-Hole Version
MHD-SP4
700-AL486
One-Way Valve
700-AB452Screen
700-AIS487 Poron Filter
760
P r os t h e t ics
a.
LimbLogic™ VS
The latest in vacuum suspension technology is LimbLogic VS. This is the first remote-controlled vacuum suspension system on the market. The 4-Hole Controller is mounted inline on a prosthesis allowing for complete
integration without the unit catching on clothing. LimbLogic VS can now be used in thermoplastic sockets
as well as laminated sockets.
Unique in the elevated vacuum market, the LimbLogic VS 4-Hole Controller is waterproof. To attain this
feature LimbLogic VS was thoroughly tested and met waterproof standards set by the International Electrotechnical Commission. Individuals with LimbLogic VS in their prostheses no longer need to avoid inclement
weather or wet environments. Note that the hand-held fob should not become wet as it is not waterproof.
LimbLogic VS operates quietly and features ‘Set & Forget’ monitoring. This means that the system monitors
the level of vacuum within the socket to maintain a secure and comfortable fit. Practitioners program LimbLogic VS for a set range of vacuum. Amputees may use the hand-held fob to adjust the vacuum level within
the practitioner-set range.
For added versatility, LimbLogic VS may be fabricated into laminated sockets or thermoplastic sockets. For
laminated sockets, a lamination 4-hole kit is included with the controller and fob. A unique drop-in adapter
enables LimbLogic VS to be used with thermoplastic sockets. From WillowWood.
Description
Thermoplastic
Lamination
LimbLogic™ VS 4-Hole Kit
LLV-1600-TLLV-1600-L
LimbLogic™ VS 4-Hole Bilateral Kit
LLV-1602-TLLV-1600-L
LLV-KIT-L Lamination Fab Kit
LLV-01060
Rubber Charging Port Cover
LLV-KIT-T Thermoplastic Fab Kit
LLV-01065
Steel Charging Port Cover
LL-01200
Key Fob KitLLV-01066Charging Port Cover
LL-01220
Key Fob Torx Driver
LLV-01070
Interlock Gasket, Set of 5
LL-01230
Key Fob KeeperLLV-01071Poron Filter
LL-01240
Fob Replacement Battery CR2
LLV-01080
Port Cover w/Drain Tube
LLV-01011 Batt Charger for LLV-1500
LLV-01100
Suction Pad
LLV-01030
Vent CoverLLV-02100Thermoplastic Tooling Kit
LLV-01041
4 Hole AttachmentLLV-1300Diagnostic Kit
LLV-01042 4 Hole Vacuum Controller
LV-01011
Charger Pack
LLV-01043 Vacuum Plate Adaptor
LLV-01045
4 Hole Thermo Transfer Plate
LLV-01044
Pyramid AdaptorLLV-01046Cosmetic Finishing Kit
Alpha® Flex Sleeve
PROSTHETICS
Size
2345678
Thigh*
8.8-12.3”
9.5-13.4”
13-18”
14-20”
16-22”
17.7-25”
19-26”
Patella
7.8-11”
9-13”
11-15.4”
12.6-17.5”
14-19.3”
15.5-21.7”
17-23.6”
Buff
Black
ALS-52B ALS53B ALS-54BALS-55BALS-56BALS-57BALS-58B
ALS-52BK ALS53BK ALS-54BKALS-55BKALS-56BKALS-57BKALS-58BK
*Measured 6” above patella.
PROSTHETICS
b.
761
Alpha® G-Lock
The G-Lock includes a one-way expulsion valve to provide suction suspension as well as a standard pin locking mechanism with pin seal. A clever new feature allows the user to secure the locking pin in place at the
nearest groove, meaning that amputees no longer have to worry about “getting caught between clicks.”
With this unique design, amputees receive the security of a pin while minimizing pistoning through the use
of suction. With its drop-in design, the G-Lock is CAD-friendly yet is also easy to work with in traditional
fabrication processes. For use in laminated or thermoplastic sockets, the G-Lock is easy to fabricate, allows
for one-step lamination, and has a four-hole pattern for attachment to the socket. Rated to 250 lb. Includes
one 38mm pin. One year warranty. From WillowWood.
Description
Item No.ò
Alpha G-Lock
700-GL480
®
Alpha® G-Lock with Pyramid
700-GL481
700-GL482
Pin, 10mm x 38mm
700-GL488 Pin, 10mm x 51mm
700-GL491 Lamination Tool
700-GL492 Thermoplastic Tooling
c.
Edison™
View vacuum suspension in a new light.
Edison is Silent. Large-bore piston operates at low speeds with high efficiency. In-line pump is housed in a
protective, insulated casing.
Edison is Adaptive. It automatically varies vacuum to meet the specific needs of daily activities, and assures
optimal comfort when patient is at rest. Variable vacuum levels may add benefit to patients suffering from
residual limb discomfort associated with dysvascular conditions. 18-hour battery and patient input free control
allow for true worry-free performance.
Edison is Intelligent. Prosthetists can select from one of three standard patient, or customizable vacuum range
profiles. On board memory allows prosthetist to verify device and socket performance on return office visits
and to assess adjustments made. From Orthocare Innovations.
Specifications
Product Weight:
Build Height:
Patient Weight Limit:
Pylon Requirement:
Battery Life:
Socket Compatibility:
379g
4.2”
300 lb
30mm with 25.4mm ID
18 hours w/normal use
vacuum suspension
Edison Adaptive Suspension Pump (Includes Charger)
Item No.ò
ED1001
Edison Charger Replacement
ED1002
Edison Filter Assembly Replacement
ED1003
Edison USB Cable Replacement
ED1004
Edison Barb Replacement
ED1005
Edison is marketed under US Patent: 8,007,543 Orthocare Innovations, LLC.
Other US and Foreign Patents Pending.
US Patents: 7,914,586; 7,947,085; 8,016,892. Under License From Ohio Willow Wood Company.
PROSTHETICS
Description
762
P r os t h e t ics
PROXIMAL SUSPENSION SYSTEMS
Summit™ Lock
a.
The original Summit Lock™ was the first proximal lock designed to control rotation and the only lock with
ZERO clearance required. Coyote Design has improved the original and created the LowPro Summit Lock™
for easier donning. Both locks are designed specifically for long limbs. There is no need to purchase a locking
liner and you can use the socket adaptor of your choice. Summit Lock™ can be used for any activity level,
above or below the knee, for anyone up to 265 lbs. Sold each. From Coyote Design.
Description
Item No.ò
Summit™ Lock
CD101
LowPro Summit™ Lock (pictured)
CD102
Summit™ Lock with Manta Attachment
CD101M
LowPro Summit™ Lock with Manta Attachment
CD102M
CD101XT
Extra Tab Kit
CD101XTM Extra Tab Kit with Manta Attachment
CD4120
Quick Adhesive
KISS™ Kits
b.
KISS’s unique pinless suspension system anchors the limb using straps mounted distally and proximally to
any roll-on locking liner. The distal strap feeds through a base component in the socket and secures to the
proximal strap in a pulley-type action. Infinitely customizable, the KISS system virtually eliminates pistoning
and rotation, increases hip tracking throughout the gait cycle and has an ultra low profile 3mm build height.
See page 543 for pediatric size kits.
4-Hole Endo KISS™ Kit
KS2/A
Features an aluminum 4-hole distal base, which also serves as an attachment base for endoskeletal componentry. It also easily retrofits with PDI™ and Bulldog™ shuttle locks. Includes aluminum tab to assist in
fabrication. Lamination adapter and spacer screws sold separately. Designed for a single socket, 2-liner application. Includes parts listed separately.
PROSTHETICS
Item No. ð
KS2/A
KS1/A
CMP2/A4-Hole Endo Distal BaseCMP22/AVelro Placard Set
CMP5/A
Adhesive Placard Set
CMP4/A
Prox Nut/Screw Set
CMP6/A
Distal Strap Set
CMP8/A
Distal Screw Set
CMP7/AProximal Strap SetCMP9/AMuffler Set
Delrin® KISS™ Kit
Features a Delrin® distal base which can be laminated into a socket, or vacuum formed in a flexible inner
socket. Includes aluminum tab to assist in fabrication. Designed for a single socket, 2-liner application. Includes parts listed separately.
Item No. ð
KS1/A
CMP1/ADelrin Distal BaseCMP22/AVelro Placard Set
CMP5/A
Adhesive Placard Set
CMP4/A
Prox Nut/Screw Set
CMP6/A
Distal Strap Set
CMP8/A
Distal Screw Set
CMP7/AProximal Strap SetCMP9/AMuffler Set
PROSTHETICS
c.
763
KISS® Replacement Kits
Includes one each: Distal Strap, Proximal Strap, Placard, Distal Screw and Proximal Nut and Screw.
Strap and Placard Color
Beige
Black
Replacement Kit with Adhesive Placard
CMP31/ACMP31/B
Replacement Kit with Velcro™ Sewn Placard
CMP32/ACMP32B
d.
Adhesive Fabrication Kit
This Fabrication Kit includes components needed to attach a KISS® placard using adhesive. This is not needed
for attaching by Velcro™. Contains 20+ applications.
Item No. ð
FN1/A
CMP10/A
Press Plates
CMP11/AKISS® Adhesive
REMOVABLE MEDIAL BRIM
e.
RMB Bar Channel Assembly
For supracondylar suspension. Includes pull strap with screw and washer, ball retainer, Teflon® coated bar,
channel, lamination block, ball and gauze. From Fillauer.
Description
Standard
Heavy Duty
127100
Bar Vise Clamp
PROSTHETICS
Item No. ð
127001127019
764
P r os t h e t ics
3-S
a.
Lamination Post
Description
Small
Small
AK/BK
AK/BK
Low Profile Low Profile
FlexibleRigidFlexibleRigidFlexibleRigid
Item No. ð125272125274125256125242125259125276
880683Replacement Truss Head Screw
b.
D-Bolt
Size
3/4”
1”
Item No. ð
125254125247
c.
Retaining Pin
Item No. ð
125266
d.
Silicone Fitting Gel
1 lb. From Fillauer.
PROSTHETICS
Item No. ð
741214
e.
3S Silicone
9 parts A to 1 part B. Part A Quart pictured. From Fillauer.
Component
A (Gallon)
Item No. ð
741280
A (Quart)
B (Pint)
741222
741284
PROSTHETICS
Knitted Goods
765
STUMP SHRINKERS
f.
X-Silver AK Stump Shrinker
The X-Silver AK Shrinker incorporates X-Static® —The Silver Fiber™ for proven anti-microbial protection.
Adjustable waist fits 32-50”. Outstanding stretch with gradient compression ensures a perfect fit every time.
Also available in standard fabric. Sold each. From Comfort Products.
Size Guide
Size
Small
Seam Color
Gold
Top Circumference
15.75”
Toe Circumference 1
13.5”
MediumMed/Large Large
Red Black
Blue
17.5”
19”
20.5”
16”
17.5”
14.75”
1
X-Large
Green
22”
19.5”
Circumference measured 2” from distal end.
X-Silver AK Stump Shrinker
Size
Small
Medium
Med/Lg
Large
X-Large
8” Length
SSX8SAK SSX8MAKSSX8MLAKSSX8LAK SSX8XLAK
10” Length
12” Length
Standard AK Stump Shrinker
Size
Small
Medium
Med/Lg
Large
X-Large
8” Length
SS8SAK SS8MAKSS8MLAKSS8LAK SS8LAK
10” Length
12” Length
g.
X-Silver BK Stump Shrinker
The X-Silver BK Shrinker incorporates X-Static® —The Silver Fiber™ for proven anti-microbial protection.
Outstanding stretch with gradient compression ensures a perfect fit every time. The top can easily be rolled
over the fingers to allow for donning with limited hand strength. Also available in standard fabric. Sold each.
From Comfort Products.
Size Guide
Size
SmallMediumLargeX-Large Black
Gold
Red Blue
Green
XX-Large
Top Circumference
10-12.25”
12.25-14.5”
14.25-17.25”
17.25-20.5”
20.5-24.5”
Toe Circumference 1 6-7.5”
7.5-8.5”
8.5-9.75”
1
9.75-11.5”
11.5-13.5”
Circumference measured 2” from distal end.
PROSTHETICS
Seam Color
X-Silver BK Shrinker
Size
Small
Medium
Large
X-Large
XX-Large
9” Length
SSX9S SSX9M SSX9L SSX9XLSSX9XXL
12” Length
14” Length
Standard BK Shrinker
Size
Small
9” Length
SS9SSS9MSS9L SS9L SS9L
Medium
Large
X-Large
XX-Large
12” Length
SS12SSS12MSS12L SS12L SS12L
14” Length
SS14SSS14MSS14LSS14L SS14L
766
Knitted Goods
PROSTHETICS
STUMP SHRINKERS — Continued
a.
Juzo Stump Shrinker
Juzo compression garments provide two-way stretch elasticity, maximizing wearing comfort and allowing
the garment to move with the wearer throughout the day. Latex free and produced using the highest quality Lycra® fibers, Juzo stump shrinkers are available in Varin Soft-In or Silver with 17% X-Static® —The Silver
Fiber™ with anti-microbial and thermodynamic properties. Sold each. From Juzo.
AK Size Guide
Size
I (XS)
II (S)
III (M)
IV (L)
V (XL)
VI (XXL)
(G) Top of Thigh
44cm
48cm
52cm
56cm
60cm
64cm
(F) Mid-Thigh
41cm
44cm
47cm
50cm
53cm
56cm
(E) Mid-Patella
31cm
34cm
37cm
40cm
43cm
46cm
BK Size Guide
Size
XXS
I (XS)
II (S)
(F) Mid-Thigh
(E) Mid-Patella
(C) Calf
III (M)
IV (L)
V (XL)
VI (XXL)
38cm
41cm
44cm
47cm
50cm
53cm
56cm
28cm
31cm
34cm
37cm
40cm
43cm
46cm
26cm
29cm
32cm
35cm
38cm
41cm
46cm
Complete the Item Number below by choosing from options beneath t. (Example: 3511FGMHA II)
Item No. ð
(Type) (Compression) (Style) (Length) (Option) (Size)
Type
tCompression
t
Style t
Length t
Option
t
Size
t
Varin Soft-In 351 20-30 mmHg 1AK
FG14” E
None XXS XXS
Silver
356 30-40 mmHg 2BK
CF12” (1)
L
Hip Attachment HAXSI
10” (1)
M
Body Part
BPS II
8” (1)
S
Silicone Border SBMIII
18” (2) L L IV
15” (2)
M
XL V
12” (2)S
XXL VI
(1)
(2)
(1)
b.
AK only. (2) BK only.
Juzo Syme’s Shrinker
Available in two compressions in Varin Soft-In fabric. Sold each. From Juzo.
PROSTHETICS
Size
X-Small
Small
Medium
Large
X-Large
20-30 mmHg
3511HD I
3511HD II
3511HD III
3511HD IV
3511HD V
30-40 mmHg
3512HD I
3512HD II
3512HD III
3512HD IV
3512HD V
c.
Compressogrip® AK Shrinker
Features a circular knit with increased power in the elastic producing a heavier fabric than that used for the
Compressogrip BK shrinker. Multi-directional stretch for improved fitting and a universal waist belt. Standard
white, or with X-Static® —The Silver Fiber™. 25-30 mmHg compression at 50% stretch. Sold each. From Knit-Rite.
Size
XS
SM
MD
Flat Width
5”
6”
7.5”
9”
Fits Circumference
12-17”
15-20”
18-24”
24-32”
White
White with Gusset
Silver
LG
2H0S05XS 2H0S06SM2H0SS7MD 2H0S09LG
N/A
N/A
2HGSS7MD2HGS09LG
2H0X05XS 2H0X06SM2H0XS7MD 2H0X09LG
PROSTHETICS
d.
Knitted Goods
767
Compressogrip® BK Elastic Shrinker
Tubular compression material used for control or prevention of edema following amputation surgery, for limb
volumetric maintenance, to minimize hypertrophic scarring and to give compressive support for pain relief.
20-25 mmHg compression at 50% stretch. At 100% stretch the compression is doubled. Double layers will
double compression at both 50% and 100% stretch. Application of more than two layers may exceed the limits
of desired therapeutic pressure. 92% polyester, 8% spandex. Latex-free. Washable. Sold each. From Knit-Rite.
Size
Fits Circumf
22.533.54 5 6
5-7”
7-10”
9-12”
10-13”
12-16”
15-20”
18-24”
White
18” Length
2H0S02182H0S0S182H0S03182H0SS3182H0S04182H0S05182H0S0618
24” Length
2H0S02242H0S0S242H0S03242H0SS3242H0S04242H0S05242H0S0624
30” Length
N/A
N/A2H0S0330N/A
2H0S04302H0S05302H0S0630
Beige
18” Length
2H0B02182H0B0S182H0B03182H0BS3182H0B04182H0B05182H0B0618
24” Length
2H0B02242H0B0S242H0B03242H0BS3242H0B04242H0B05242H0B0624
30” Length
N/A
N/A2H0B0330N/A
2H0B04302H0B05302H0B0630
e.
Compressogrip® BK Shrinker with X-Static®
All the benefits of Knit-Rite’s original Compressogrip Shrinker, plus the anti-microbial and thermodynamic
properties of X-Static® —The Silver Fiber™. 88% polyester, 8% spandex, 4% X-Static®. Latex-free. Washable.
Size
Fits Circumf
18” Length
22.533.54 5 6
5-7”
7-10”
9-12”
10-13”
12-16”
15-20”
18-24”
2H0X02182H0X0S182H0X0318N/A2H0X04182H0X0518N/A
24” Length
2H0X0324
N/A
30” Length
N/A
2H0X04242H0X05242H0X0624
2H0XS3302H0X04302H0X05302H0X0630
f.
Post-Op Dressing Retention Sock with Belt
PROSTHETICS
Designed on the model of the popular Compressogrip AK Shrinker, the Post-Op Dressing Retention Sock with
Belt utilizes a very soft, compressive fit, with a belt suspension to cover and retain postoperative dressings of
transfemoral amputees. It features a soft Lycra® and Coolmax® body for very low compression and universal
right or left belt system to maintain secure suspension. Can be used for AK or BK. Does not irritate or stress
sutures during donning. Does not compromise peripheral circulation in marginal bypass vascular grafts. Can
be used in combination with removable rigid dressings. Sold each. From Knit-Rite.
Size
Small
Medium
Large
Item No. ð
1RP104281RP10632 1RP10832
768
Knitted Goods
PROSTHETICS
a.
3-Dimensional AK Shrinker
Easy to adjust, hook and pile side opening waist band, adaptable for left or right. Tapered design for gradient
pressure. Two compressions. Garment length from groin to distal end should be one to two inches shorter
than actual measurement so that proper snugging of distal end will not result in roll at groin. Sold each.
From Knit-Rite.
Flat Width
Top
Flat Width
Toe
Fits Circumf
Top
Fits Circumf
Length
Heavy
Medium
Toe
Groin to Distal 60-65 mmHg 30-35 mmHg
6”
4” 15-17”12-14.5” 7” 2HPH64072HPM6407
10”
2HPH64102HPM6410
13”
2HPH64132HPM6413
7”
4” 17.5-20.5”12-14.5”
7” 2HPH74072HPM7407
10”
2HPH74102HPM7410
13”
2HPH74132HPM7413
8”
4” 21-23”12-14.5” 7” 2HPH84072HPM8407
10”
2HPH84102HPM8410
13”
2HPH84132HPM8413
7”
5” 17.5-20.5”15-17.5”
7” 2HPH75072HPM7507
10”
2HPH75102HPM7510
13”
2HPH75132HPM7513
8”
5” 21-23”15-17.5” 7” 2HPH85072HPM8507
10”
2HPH85102HPM8510
13”
2HPH85132HPM8513
9”
5” 23.5-25.5”15-17.5”
7” 2HPH95072HPM9507
10”
2HPH95102HPM9510
13”
2HPH95132HPM9513
8”
6” 21-23”18-22” 7”2HPH86072HPM8607
10”
2HPH86102HPM8610
13”
2HPH86132HPM8613
9”
6” 23.5-25.5”18-22”
7” 2HPH96072HPM9607
10”
2HPH96102HPM9610
13”
2HPH96132HPM9613
10”
6” 26-29”18-22” 7”2HPH06072HPM0607
10”
2HPH06102HPM0610
13”
N/A2HPM0613
PROSTHETICS
b.
Knit-Rite BK Shrinker, Regular Taper
Made from rayon/Lycra® core yarn. Soft, comfortable and easy to put on. Two compressions: heavy (green
top) and medium (gray top). Machine washable. Sold each.
Compression 55-60 mmHg 55-60 mmHg 55-60 mmHg
Width
Flat Top
Flat Toe
25-30 mmHg 25-30 mmHg
25-30 mmHg
Narrow
Medium
Wide
Narrow Medium
Wide
5”
6”
7”
5”
6”
7”
3”
4”
5”
3”
4”
5”
Top Circumf
13-14”
15-17”
18-20”
13-14”
15-17”
18-20”
Toe Circumf
9-11”
12-14”
15-17”
9-11”
12-14”
15-17”
10” Length
2HPHRN10 2HPHRM10 2HPHRW10 2HPMRN102HPMRM10 2HPMRW10
12” Length
14” Length
PROSTHETICS
c.
Knitted Goods
769
Knit-Rite BK Shrinker, Double Taper
Made from rayon/Lycra® core yarn. Soft, comfortable and easy to put on. Two compressions: heavy (green
top) and medium (gray top). Gradual taper distally, flaring to a wide top. Machine washable. Sold each.
Compression 55-60 mmHg 55-60 mmHg 55-60 mmHg
Width
25-30 mmHg 25-30 mmHg
25-30 mmHg
Narrow
Medium
Wide
Narrow Medium
Wide
5”
7”
8”
5”
7”
8”
Flat Top
Flat Mid 3.5”4.5”5.5”3.5”4.5” 5.5”
Flat Toe
Top Circumf
Toe Circumf
3”
4”
5”
3”
4”
5”
15-17”
18-20”
21-24”
15-17”
18-20”
21-24”
9-11”
12-14”
15-17”
9-11”
12-14”
15-17”
10” Length
2HPHDN10 2HPHDM10 2HPHDW10 2HPMDN102HPMDM10 2HPMDW10
12” Length
14” Length
d.
medi AK Shinker
Features include soft, smooth material for all day wearing comfort. ClimaComfort rapidly wicks moisture from
skin. ClimaFresh prevents bacterial colonization within the fabric. Movable waistbelt Sold each. From Medi USA.
Size
44cm
48cm
52cm
56cm
60cm
64cm
Length
123456
20-30 mmHg
Short
8”
AK1S0W1AK1S0W2AK1S0W3AK1S0W4AK1S0W5AK1S0W6
Medium
10”
AK1M0W1AK1M0W2AK1M0W3AK1M0W4AK1M0W5AK1M0W6
Long
12”
AK1L0W1AK1L0W2AK1L0W3AK1L0W4AK1L0W5AK1L0W6
X-Long
14”
AK1X0W1AK1X0W2AK1X0W3AK1X0W4AK1X0W5AK1X0W6
30-40 mmHg
Short
8”
AK2S0W1AK2S0W2AK2S0W3AK2S0W4AK2S0W5AK2S0W6
Medium
10”
AK2M0W1AK2M0W2AK2M0W3AK2M0W4AK2M0W5AK2M0W6
Long
12”
AK2L0W1AK2L0W2AK2L0W3AK2L0W4AK2L0W5AK2L0W6
X-Long
14”
AK2X0W1AK2X0W2AK2X0W3AK2X0W4AK2X0W5AK2X0W6
medi BK Shinker
Features include soft, smooth material for all day wearing comfort. ClimaComfort rapidly wicks moisture from
skin. ClimaFresh prevents bacterial colonization within the fabric. Silicone beaded BK topband for superior
suspension. From Medi USA.
Proximal Circumf
Size
38cm
41cm
44cm
47cm
50cm
53cm
PROSTHETICS
e.
56cm
Length
0123456
20-30 mmHg
Short
12”
BK1S0N0BK1S0N1BK1S0N2BK1S0N3BK1S0N4BK1S0N5BK1S0N6
Medium
15”
BK1M0N0BK1M0N1BK1M0N2BK1M0N3BK1M0N4BK1M0N5BK1M0N6
Long
18” BK1L0N0BK1L0N1BK1L0N2BK1L0N3BK1L0N4BK1L0N5BK1L0N6
30-40 mmHg
Short
12”
BK2S0N0BK2S0N1BK2S0N2BK2S0N3BK2S0N4BK2S0N5BK2S0N6
Medium
15”
BK2M0N0BK2M0N1BK2M0N2BK2M0N3BK2M0N4BK2M0N5BK2M0N6
Long
18”
BK2L0N0BK2L0N1BK2L0N2BK2L0N3BK2L0N4BK2L0N5BK2L0N6
770
Knitted Goods
PROSTHETICS
a.
Tensitube Blue Shrinker
Unlike other shrinkers on the market, the compression of the Tensitube Blue Shrinker is consistent between
sizes. Available in white, beige and silver fabrics. Silver style is naturally antimicrobial and moisture wicking.
Also available in 11 yard roll. Shrinker sold each. From RX Textiles.
Fits Circumference
5-7”
9-12”
(12.5-17.5cm) (22.5-30cm)
12-16”
(30-40cm)
15-20”
(38-50cm)
18-24”
(45-60cm)
White
18” Length
0100100010070001010000101300 0101600
24” Length
01002000100800 01011000101400 0101700
30” Length
N/A
010090001012000101500 0101800
Beige
18” Length
01401400140700 01410000141300 0141600
24” Length
0140200014080001411000141400 0141700
30” Length
N/A
014090001412000141500 0141800
Silver
18” Length
0150150 0150700 01510000151300 0151600
24” Length
0150200015080001511000151400 0151700
30” Length
N/A
015090001512000151500 0151800
b.
831-AK Stump Shrinker
PROSTHETICS
One-piece surgical weight elastic construction with one-way stretch. Contoured at groin with padded drawstring bottom. Adjustable elastic waist band with hook and pile closure. Sold each. From Truform.
Size
Small
Medium Large
X-Large
Thigh Circumference
13-16”
16-19”
19-22”
22-25”
6” Length
0831-AK6-S0831-AK6-M 0831-AK6-L0831-AK6-XL
8” Length
0831-AK8-S0831-AK8-M 0831-AK8-L0831-AK8-XL
10” Length
0831-AK10-S0831-AK10-M0831-AK10-L0831-AK10-XL
12” Length
0831-AK12-S0831-AK12-M0831-AK12-L0831-AK12-XL
14” Length
0831-AK14-S0831-AK14-M0831-AK14-L0831-AK14-XL
16” Length
0831-AK16-S0831-AK16-M0831-AK16-L0831-AK16-XL
c.
833-BK Stump Shrinker
One-way stretch surgical elastic with padded distal end. Sold each. From Truform.
Size
Calf Circumf
X-Small
Small
Medium Large
X-Large
9-11”
11-13”
13-15”
15-17”
17-19”
6” Length 0833-BK6-XS0833-BK6-S 0833-BK6-M 0833-BK6-L0833-BK6-XL
8” Length
0833-BK8-XS0833-BK8-S 0833-BK8-M 0833-BK8-L0833-BK8-XL
10” Length
12” Length
14” Length
PROSTHETICS
d.
Knitted Goods
771
836-BK Stump Shrinker with Silicone Band
Medium weight nylon/spandex construction with two-way stretch. Features silicone proximal band. Beige.
Sold each. From Truform.
Size
Knee Circumf
X-Small
Small
Medium Large
X-Large
to 12.25”
to 13.5”
to 14.5”
to 15.75”
to 17”
8” Length
10” Length
12” Length
14” Length
e.
Also available in size 2X (to 18” knee circumference).
837-AK Stump Shrinker with Expansion Gusset
One-piece surgical weight elastic construction with one-way stretch. Contoured at groin with padded drawstring bottom. Adjustable elastic waist band with hook and pile closure. Slightly tapered expansion gusset
prevents irritation over the inner thigh near the groin area. Sold each. From Truform.
Size
Thigh Circumference Small
Medium Large
X-Large
13-16”16-19”19-22”22-25”
6” Length
0837-AK6-S0837-AK6-M 0837-AK6-L0837-AK6-XL
8” Length
0837-AK8-S0837-AK8-M 0837-AK8-L0837-AK8-XL
10” Length
0837-AK10-S0837-AK10-M0837-AK10-L0837-AK10-XL
12” Length
0837-AK12-S0837-AK12-M0837-AK12-L0837-AK12-XL
14” Length
0837-AK14-S0837-AK14-M0837-AK14-L0837-AK14-XL
f.
839-AK Stump Shrinker
One-piece medium weight spandex elastic construction with two-way stretch. Hook and pile closure. Wide
contour cut around groin for added comfort. 35 mmHg compression. Beige. Sold each. From Truform.
Size
Small
Medium Large
X-Large
Thigh Circumference
13-16”
16-19”
19-22”
22-25”
0839-AK8-S 0839-AK8-M 0839-AK8-L0839-AK8-XL
10” Length
0839-AK10-S0839-AK10-M0839-AK10-L0839-AK10-XL
12” Length
0839-AK12-S0839-AK12-M0839-AK12-L0839-AK12-XL
14” Length
0839-AK14-S0839-AK14-M0839-AK14-L0839-AK14-XL
g.
Also available in size 2X (25-28” thigh circumference).
839-BK Stump Shrinker
Medium weight spandex construction with two-way stretch. Beige. Sold each. From Truform.
Size
Knee Circumf
X-Small
Small
Medium Large
X-Large
to 12.25”
to 13.5”
to 14.5”
to 15.75”
to 17”
8” Length
10” Length
12” Length
14” Length
Also available in size 2X (to 18” knee circumference).
PROSTHETICS
8” Length
772
Knitted Goods
PROSTHETICS
SHEATHS
a.
ProActive Wear® Interface Sheath
For auxiliary suspension to help create a snug, comfortable fit to the silicone liner. Pre-shrunk 95% cotton,
5% Lycra®. Finished cuff at top prevents roll down. Distal hole accommodates pin type attachment. Hand or
machine washable, no bleach. Tumble dry. Sold each.
Size
Length
Stretch Width
Max
Max
Item No.ò
Length Top
Bottom
Above Knee
15”
36”
4”
15”
10”
IRSS-AK-2
Below Knee
12”
29”
4”
12”
10”
IRSS-BK-2
b.
Fitting Sheath
Knitted cotton for a snug, comfortable fit. Able to stretch 50% more at the top of the sheath than it does at the
bottom. Fashioned hole in bottom to accommodate pin type attachment systems. Finished cuff top to prevent
roll down. 50% cotton, 50% polyester. Pre-shrunk. Machine washable . Tumble dry. Sold each. From ALPS.
Size
Length
Length
Width
W Top
W Bottom Item No.ò
RelaxedStretchedRelaxedStretchedStretched
S/M
17”
30”
4”
12”
10”
FS-495 S/M
L/XL
16”
26”
6”
15”
11”
FS-495 L/XL
c.
Comfort Products Prosthetic Sheath
Features include reinforced toe for greater wear resistance, open mesh design that stretches to conform
to shape while allowing for ventilation and turned welt construction to provide strength where it is most
needed. Sold each.
Size
AK Med
BK Short
BK Med
BK Long
Length
16-20”
10-14”
16-20”
22-26”
Standard
SHA SHSSHM SHL
with Distal Hole
SHA3 SHS3SHM3 SHL3
PROSTHETICS
d.
Silver Liner Sheath
Same as above but with X-Static® —The Silver Fiber™. X-Static® yarn has a pure layer of silver incorporated
into the surface of the fiber. X-Static® eliminates odor causing bacteria, keeps the wearer cooler in summer
and warmer in winter, and is anti-static. Sold each. From Comfort Products.
Size
AK Med
BK XX-Short BK X-Short
Length
14-18”
Standard Silver
XSHA XSHXXSXSHXS XSHS XSHM XSHL
w/Distal Hole
XSHA3 XSHXXS3XSHXS3 XSHS3 XSHM3 XSHL3
6-8”
8-10”
BK Short
BK Med
BK Long
10-12”
14-18”
20-24”
PROSTHETICS
e.
Knitted Goods
773
AK Brim Sheath
For above knee patients, for all socket styles. Designed to separate and protect the soft tissue in the top brim
of the socket. Used to bridge the gap between the top edge of any roll on liner and the groin. Will work on
pin suspension and seal in liners.
Brim sheath uses stretchy, slick nylon material, constructed in two angled sections to allow the fabric design
to fit the high lateral and lower medial shape appropriately. Includes gripper elastic to secure to outer socket.
Three sizes. Black. Sold each. From Knit-Rite.
Sie
Small
Medium
Large
Item No. ð
2HBSAKSM2HBSAKMD 2HBSAKLG
f.
Knit-Rite Prosthetic Sheath
100% stretch nylon. Sized to socks. Dusk or white. 3 pair per box. From Knit-Rite. See page 548 for child sizes.
Size
Sock Size
Length
Narrow Short
B, 0, 1
10-14”
2HPBNASH2HPWNASH
Dusk
White
Narrow Medium
B, 0, 1
16-20”
2HPBNAMD2HPWNAMD
Narrow Long
B, 0, 1
22-28”
2HPBNALG2HPWNALG
Regular X-Short
1, 2
8-10”
2HPBRGXS2HPWRGXS
Regular Short
1, 2
10-14”
2HPBRGSH2HPWRGSH
Regular Medium
1, 2
16-20”
2HPBRGMD2HPWRGMD
Regular Long
1, 2
22-28”
2HPBRGLG2HPWRGLG
Wide Short
3+
10-14”
2HPBWDSH2HPWWDSH
Wide Medium
3+
16-20”
2HPBWDMD2HPWWDMD
Wide Long
3+
22-28”
2HPBWDLG2HPWWDLG
g.
Knit-Rite Silver Sheath
91% nylon, 9% X-Static® —The Silver Fiber™. Features antimicrobial and moisture wicking properties. Sold 3
pair per box. From Knit-Rite.
Size
Narrow
Narrow
Regular
Regular
Regular
Wide
X-ShortShortX-ShortShortMediumShort
B, 0, 1
Length
8-10”10-14”8-10”10-14”16-20”10-14”
B, 0, 1
1, 2,
1, 2
1, 2
3+
Item No. ð 2HPXNAXS 2HPXNASH 2HPXRGXS 2HPXRGSH2HPXRGMD2HPXWDSH
PROSTHETICS
Sock Size
h.
Knit-Rite Super Stretch Sheath
For friction and volume control. 98% nylon, 2% Lycra®. Dusk or white. 3 pair per box. From Knit-Rite.
Size
Sock Size
Length
Regular Short
1, 2
10-14”
2HPSBRSH2HPSWRSH
Dusk
White
Regular Medium
1, 2
16-20”
2HPSBRMD2HPSWRMD
7 74
Knitted Goods
PROSTHETICS
SHEATHS — Continued
a.
Knit-Rite Hole-In-Toe Sheath
100% stretch nylon. Sold pair. From Knit-Rite.
Size
Sock Size
Length
Regular Short
1, 2
10-14”
2HPBRHSH2HPWRHSH
Dusk
White
Wide Short
3+
10-14”
2HPBWHSH2HPWWHSH
b.
Liner-Liner ®
Designed to be worn next to the skin under a suspension liner, the Liner-Liner ® relieves skin shear irritations
and improves comfort with liner. Ultra-thin material minimizes compromise to liner’s suction grip on skin.
X-Static® silver fibers fight odor-causing bacteria and transport heat and moisture away from the skin. High
stretch for excellent fit. 5.8% Lycra® spandex, 94.2% polyester/X-Static®. Sold each. From Knit-Rite.
Size
Narrow
Narrow
Regular
Regular
Wide
Wide
X-ShortShortX-ShortShort ShortMedium
Fits Sock Size
B, 0
Length
Item No. ð
B, 0
1,2
1,2
3
3
8-12”10-14”8-12”10-14”10-14”16-20”
1SXLNAXS 1SXLNASH 1SXLRGXS 1SXLRGSH 1SXLWDSH1SXLWDMD
c.
Ultra Low Friction Sheath™ (ULFS)
Especially beneficial for difficult-to-fit limbs such as those with excess soft tissue or edema, bulbous distal
ends or other uniquely shaped limbs, and to aid in donning removable rigid dressings. Also helps to don
shrinkers because it reduces skin shear and tension on the suture line. Using the ULFS allows more socks to be
applied to the residual limb before donning, thus providing increased soft tissue compression. Double Layer
or Single Layer with Hole for use with locking liners. 100% nylon. Machine washable, no bleach. Tumble
dry. Sold each. From Knit-Rite.
Top Width
14” Double Layer
PROSTHETICS
21” Double Layer
14” Single Layer w/Hole
21” Single Layer w/Hole
8”
10”
12”
14”
16”
18”
2HUL14082HUL14102HUL14122HUL14142HUL1416N/A
N/A
2HUL21102HUL21122HUL21142HUL21162HUL2118
2HU114082HU114102HU114122HU114142HU11416N/A
N/A
2HU121102HU121122HU121142HU121162HU12118
d.
Relax Night Care Sock
The Night Care combines Umbrellan technology with the softness of Clima-Comfort in a textile weave for
nighttime relief. Wicks moisture away from the skin. Soft topband for a relaxed proximal fit. Sold each. From
Medi USA.
Size
Small
Medium Large
Item No. ð
18803221880323 1880324
PROSTHETICS
e.
Knitted Goods
775
Prosthetic Sheath
100% stretch nylon in white or flesh. Features reinforced toe and turned welt construction at top. Sold 3 per
box. From Truform.
Size
Small
Medium
Large
White
0830-W-BKS0830-W-BKKM0830-W-BKL
Flesh
0830-F-BKS0830-F-BKKM0830-F-BKL
f.
Sheath with Pocket Seam
Wicks perspiration away from the skin. Reduces friction between the limb and prosthesis. Eleven sizes in two
styles: Pocket Seam or Bottom Seam. 100% nylon. Machine wash and dry. Sold each. From Trulife.
Size Guide
X-Narrow
Narrow
Regular
Short
Top Width
4.5-5”
(11-13cm)
6-7”
(15-18cm)
8-9”
(20-23cm)
10-12”
(25-30cm)
Pocket Seam
Short Length (12-14”)
54011U02 54012U0254013U02 54014U02
Regular Length (16-18”)
N/A
54012U0354013U03 DISCON
Long Length (20-24”)
N/A
54012U0454013U04 54014U04
X-Long Length (26-30”)
N/A
N/A
54013U05N/A
Bottom Seam
Short Length (12-14”)
54021U02 54022U0254023U02 54024U02
Regular Length (16-18”)
N/A
54022U0354023U03 54024U03
Long Length (20-24”)
N/A
54022U0454023U04 54024U04
X-Long Length (26-30”)
N/A
N/A
54023U05N/A
g.
BK Prosthetic Tube Sock
A 3-ply terry lined, all cotton tube sock. Breathable, reversible and an ideal sheath companion. May also be
used as a low cost prosthetic sock. Individually wrapped, six per package. From Comfort Products.
Size
12” Length
16” Length
22” Length
28” Length
Maximum Circumference
8-10”
10-14”
16-20”
20-26”
Standard
CPT12 CPT16CPT22 CPT28
with Distal Hole
PROSTHETICS
FILLER, SPACER and FITTING SOCKS
776
Knitted Goods
PROSTHETICS
FILLER, SPACER and FITTING SOCKS — Continued
a.
Knit-Rite Proximal Soft-Sock
A tapered, open-ended Soft Sock used to manage proximal volume changes. Polyester/Lycra®. Sold each.
Size
Sock Size
Regular Short
1, 2
Lightweight
3 Ply
5 Ply
1PS1RGSH1PS3RGSH 1PS5RGSH
Regular Medium 1, 2
1PS1RGMD1PS3RGMD 1PS5RGMD
Wide Medium
3+
1PS1WDMD1PS3WDMD 1PS5WDMD
X-Wide Medium
4+
1PS1XWMD1PS3XWMD 1PS5XWMD
b.
Knit-Rite Spacer Sock
A single ply cotton/polyester sock with seam one inch above distal end. Rounded, reinforced toe for good fit
and long wear. Soft, comfortable and absorbent. Lightweight or heavy. Six per package.
Size
Sock Size
Narrow
Medium Wide
X-Wide
XX-Wide
XX-Wide/Long
B, )
1, 2
3, 4
4, 5
5, 6
5, 6
18” (45cm)
18” (45cm)
24” (60cm) 18” (45cm)
24” (60cm)
Length
15” (38cm)
Lightweight
6S8035LT6S8040LT6S8045LTN/A
Heavy
6S8035HV 6S8040HV 6S8045HV 6S8050HV6S8055HV 6S8060HV
N/A
N/A
c.
Hole-In-Toe Spacer Sock
Features a reinforced distal hole for accommodating pin attachment. Heavy weight. Six per package. From
Knit-Rite.
Size
Narrow
Medium Wide
Sock Size
B, 0
1, 2
3, 4
Length
15” (38cm)
18” (45cm)
18” (45cm)
Item No. ð
6SS035HV6SS040HV 6SS045HV
PROSTHETICS
d.
Stretch Spacer Sock
Provides improved fit, range of motion and reduced migration. Soft, smooth cotton finish with a durable,
reciprocal seamed sheath-type toe. Medium single ply cotton/Lycra®. Two styles: turn down cuff with cotton/Lycra® toe and straight top with nylon toe. Standard or Hole-In-Toe with reinforced distal hole. Six per
package. From Knit-Rite.
Turn Down Cuff with Cotton/Lycra® Toe
Size
Narrow Short
Med Short
Wide Short
Sock Size
A, B
0, 1
2, 3, 4
Unstretched Length
12” (30cm)
12” (30cm)
12” (30cm)
Standard
6S8S35SH6S8S40SH 6S8S45WS
Hole-In-Toe
6SSS35SH6SSS40SH 6SSS45WS
Straight Top with Nylon Toe
Size
Narrow Medium Wide
Wide
Sock Size
A, B
0, 1
2, 3, 4
2, 3, 4
15” (38cm)
12” (30cm)
18” (45cm)
Unstretched Length
12” (30cm)
Standard
6S8S35MD6S8S40MD 6S8S45SH 6S8S45MD
Hole-In-Toe
6SSS35MD6SSS40MD6SSS45SH 6SSS45MD
PROSTHETICS
e.
Knitted Goods
777
TuffToe™
A cotton/Lycra® elastic fitting sock specifically designed for use with a locking device pin. Features a super
tough 100% nylon reinforced toe and the addition of a tightly sewn circular hole at the distal end. Special
thread used to sew the hole further strengthens the opening. Finally, a gel is applied to the hole making the
TuffToe™ virtually indestructible. Six per package. From RX Textiles.
Ply
1 Ply
2 Ply
4 Ply
Above Knee, 14” Length
30004603000560 3000660
Below Knee, 10” Length
30001603000260 3000360
f.
Elastic Fitting Sock
A one-ply fitting sock that combines cotton/Lycra® and polypropylene yarns for optimum softness, stretch
and comfort while wicking moisture away from skin. 50% more stretch at the top than bottom allows for
better tapering. Machine wash, tumble dry. Sold each. From RX Textiles.
Size
AK
BK
Item No. ð
EFS-L/XLEFS-S/M
PROSTHETIC FOOT SOCKS
g.
Spectra® Sock
The Spectra Sock was designed for use with carbon feet. The sock helps to protect the foot from dust and dirt
while eliminating the common noises caused by the foot moving inside the foot shell. Additionally, Spectra®
Sock helps protect the foot shell from excess wear caused by the carbon rubbing against the foot shell. Sold
each. From Comfort Products.
Item No. ð
SPS
h.
Trulife Spectra Sock
28584-001
PROSTHETICS
Item No. ð
i.
High Activity Spectra Sock
Available separately. From WillowWood.
Item No. ð
700-SS001
778
Knitted Goods
PROSTHETICS
PROSTHETIC SOCKS
a.
Comfort Regal™
The Regal™ sock features an acrylic/Lycra® blend which stretches to conform to the residual limb, while
moisture wicking properties keep wearer dry and comfortable. Fleeced interior. Rounded toe prevents distal
bunching. Machine wash and dry. Sold each. From Comfort Products.
Size Guide
Sock Size
NarrowMedium Wide X-Wide
(NA)
(MD)
(WD)
(XW)
00, 0, A0, A1
Top
1, 2
3, 4
5, 6
4-6” 7-8” 9-10”10-12”
Toe 3-3.5” 4-5”5.5-6” 7-8”
Length Guide X-Short Short
(XS)
(SH)
Mid
(PERF)
Regular Long X-LongXX-Long
(RG)
(LG)
(XL)
(XXL)
Length
8-10” 10-12” 12-14” 14-16”18-20”22-24”26-28”
Item Numbers
2 Ply
3 Ply
4 Ply
5 Ply
6 Ply
7 Ply
Narrow/X-Short
Size/Length
PSRNAXS2
PSRNAXS3
PSRNAXS4
PSRNAXS5
PSRNAXS6
PSRNAXS7
Narrow/Short
PSRNASH2
PSRNASH3PSRNASH4PSRNASH5
Narrow/Mid
PSRNAPERF2PSRNAPERF3PSRNAPERF4PSRNAPERF5PSRNAPERF6PSRNAPERF7
Narrow/Regular
PSRNARG2 PSRNARG3PSRNARG4PSRNARG5
PSRNARG6PSRNARG7
Narrow/Long
PSRNALG2
PSRNALG3PSRNALG4PSRNALG5
PSRNALG6PSRNALG7
PSRNAXL2 PSRNAXL3PSRNAXL4PSRNAXL5
PSRNAXL6PSRNAXL7
Narrow/X-Long
Narrow/XX-Long
PSRNAXXL2 PSRNAXXL3 PSRNAXXL4 PSRNAXXL5 PSRNAXXL6 PSRNAXXL7
Medium/X-Short
PSRMDXS2
Medium/Short
Medium/Mid
PSRMDXS3
PSRMDXS4
PSRMDXS5
PSRMDXS6
PSRMDXS7
PSRMDSH2 PSRMDSH3PSRMDSH4PSRMDSH5PSRMDSH6PSRMDSH7
PSRMDPERF2PSRMDPERF3PSRMDPERF4PSRMDPERF5PSRMDPERF6PSRMDPERF7
Medium/Regular
PSRMDRG2 PSRMDRG3PSRMDRG4PSRMDRG5PSRMDRG6PSRMDRG7
Medium/Long
PSRMDLG2 PSRMDLG3PSRMDLG4PSRMDLG5PSRMDLG6PSRMDLG7
Medium/X-Long
Med/XX-Long
PSRMDXL2 PSRMDXL3PSRMDXL4PSRMDXL5PSRMDXL6PSRMDXL7
PSRMDXXL2 PSRMDXXL3 PSRMDXXL4 PSRMDXXL5 PSRMDXXL6 PSRMDXXL7
Wide/X-Short
PSRWDXS2
Wide/Short
PSRWDSH2 PSRWDSH3PSRWDSH4PSRWDSH5PSRWDSH6PSRWDSH7
Wide/Mid
PROSTHETICS
PSRNASH6PSRNASH7
PSRWDXS3
PSRWDXS4
PSRWDXS5
PSRWDXS6
PSRWDXS7
PSRWDPERF2PSRWDPERF3PSRWDPERF4PSRWDPERF5PSRWDPERF6PSRWDPERF7
Wide/Regular
PSRWDRG2 PSRWDRG3PSRWDRG4PSRWDRG5PSRWDRG6PSRWDRG7
Wide/Long
PSRWDLG2 PSRWDLG3PSRWDRLG4PSRWDLG5PSRWDLG6PSRWDLG7
Wide/X-Long
PSRWDXL2 PSRWDXL3PSRWDXL4PSRWDXL5PSRWDXL6PSRWDXL7
Wide/XX-Long
PSRWDXXL2 PSRWDXXL3 PSRWDXXL4 PSRWDXXL5 PSRWDXXL6 PSRWDXXL7
X-Wide/X-Short
PSRXWDXS2 PSRXWDXS3 PSRXWDXS4 PSRXWDXS5 PSRXWDXS6 PSRXWDXS7
X-Wide/Short
PSRXWDSH2 PSRXWDSH3 PSRXWDSH4 PSRXWDSH5 PSRXWDSH6 PSRXWDSH7
X-Wide/Mid
PSRXWDPERF2PSRXWDPERF3PSRXWDPERF4PSRXWDPERF5PSRXWDPERF6PSRXWDPERF7
X-Wide/Regular
PSRXWDRG2PSRXWDRG3PSRXWDRG4PSRXWDRG5PSRXWDRG6PSRXWDRG7
X-Wide/Long
PSRXWDLG2PSRXWDLG3PSRXWDLG4PSRXWDLG5PSRXWDLG6PSRXWDLG7
X-Wide/X-Long
PSRXWDXL2 PSRXWDXL3 PSRXWDXL4 PSRXWDXL5 PSRXWDXL6 PSRXWDXL7
X-Wide/XX-Long
PSRXWDXXL2PSRXWDXXL3PSRXWDXXL4PSRXWDXXL5PSRXWDXXL6PSRXWDXXL7
Item numbers in bold face are manufacturer stock items.
Add 3 to the end of item number for a vulcanized distal hole.
Add 3K to the end of item number for knitted distal hole.
PROSTHETICS
b.
Knitted Goods
779
Comfort Ag™
The Comfort Ag™ sock is made using CoolMax® fabric plaited with X-Static® —The Silver Fiber™. The CoolMax®
wicks moisture away from the skin to help keep the wearer dry and comfortable. The anti-microbial properties of silver eliminate odor-causing bacteria and fungi. Fleeced interior. Sold each. From Comfort Products.
Size Guide
Sock Size
(NA)
(MD)
(WD)
(XW)
00, 0, A0, A1
Top
1, 2
3, 4
5, 6
4-6” 7-8” 9-10”10-12”
Toe 3-3.5” 4-5”5.5-6” 7-8”
Length Guide X-Short Short
(XS)
(SH)
Length
Mid
(PERF)
Regular Long X-LongXX-Long
(RG)
(LG)
(XL)
(XXL)
8-10” 10-12” 12-14” 14-16”18-20”22-24”26-28”
Item Numbers
Size/Length
3 Ply
Narrow/X-Short PSRAGNAXS3
4 Ply
5 Ply
6 Ply
7 Ply
PSRAGNAXS4
PSRAGNAXS5
PSRAGNAXS6
PSRAGNAXS7
Narrow/Short
PSRAGNASH3PSRAGNASH4PSRAGNASH5PSRAGNASH6PSRAGNASH7
Narrow/Mid
PSRAGNAPERF3 PSRAGNAPERF4 PSRAGNAPERF5 PSRAGNAPERF6 PSRAGNAPERF7
Narrow/Reg
PSRAGNARG3PSRAGNARG4PSRAGNARG5PSRAGNARG6PSRAGNARG7
Narrow/Long
PSRAGNALG3PSRAGNALG4PSRAGNALG5PSRAGNALG6PSRAGNALG7
Narrow/X-Long PSRAGNAXL3PSRAGNAXL4PSRAGNAXL5PSRAGNAXL6PSRAGNAXL7
Narrow/XXL
PSRAGNAXXL3 PSRAGNAXXL4 PSRAGNAXXL5 PSRAGNAXXL6 PSRAGNAXXL7
Med/X-Short
PSRAGMDXS3
PSRAGMDXS4
PSRAGMDSH3
PSRAGMDSH4
Med/Short
PSRAGMDXS5
PSRAGMDXS6
PSRAGMDXS7
PSRAGMDSH5PSRAGMDSH6PSRAGMDSH7
Med/Mid
PSRAGMDPERF3 PSRAGMDPERF4 PSRAGMDPERF5 PSRAGMDPERF6 PSRAGMDPERF7
Med/Reg
PSRAGMDRG3PSRAGMDRG4PSRAGMDRG5PSRAGMDRG6PSRAGMDRG7
Med/Long
PSRAGMDLG3PSRAGMDLG4PSRAGMDLG5PSRAGMDLG6PSRAGMDLG7
Med/X-Long
PSRAGMDXL3PSRAGMDXL4PSRAGMDXL5PSRAGMDXL6PSRAGMDXL7
Med/XXL
PSRAGMDXXL3 PSRAGMDXXL4 PSRAGMDXXL5 PSRAGMDXXL6 PSRAGMDXXL7
Wide/X-Short
PSRAGWDXS3
Wide/Short
PSRAGWDSH3PSRAGWDSH4PSRAGWDSH5PSRAGWDSH6PSRAGWDSH7
PSRAGWDXS4
PSRAGWDXS5
PSRAGWDXS6
PSRAGWDXS7
Wide/Mid
PSRAGWDPERF3 PSRAGWDPERF4 PSRAGWDPERF5 PSRAGWDPERF6 PSRAGWDPERF7
Wide/Regular PSRAGWDRG3PSRAGWDRG4PSRAGWDRG5PSRAGWDRG6PSRAGWDRG7
PSRAGWDLG3PSRAGWDRLG4PSRAGWDLG5PSRAGWDLG6PSRAGWDLG7
Wide/X-Long
PSRAGWDXL3PSRAGWDXL4PSRAGWDXL5PSRAGWDXL6PSRAGWDXL7
Wide/XX-Long PSRAGWDXXL3 PSRAGWDXXL4 PSRAGWDXXL5 PSRAGWDXXL6 PSRAGWDXXL7
X-Wide/X-ShortPSRAGXWDXS3 PSRAGXWDXS4 PSRAGXWDXS5 PSRAGXWDXS6 PSRAGXWDXS7
X-Wide/Short
PSRAGXWDSH3 PSRAGXWDSH4 PSRAGXWDSH5 PSRAGXWDSH6 PSRAGXWDSH7
X-Wide/Mid
PSRAGXWDPERF3PSRAGXWDPERF4PSRAGXWDPERF5PSRAGXWDPERF6PSRAGXWDPERF7
X-Wide/Reg
PSRAGXWDRG3 PSRAGXWDRG4 PSRAGXWDRG5 PSRAGXWDRG6 PSRAGXWDRG7
X-Wide/Long PSRAGXWDLG3PSRAGXWDLG4PSRAGXWDLG5PSRAGXWDLG6PSRAGXWDLG7
X-Wide/X-Long PSRAGXWDXL3 PSRAGXWDXL4 PSRAGXWDXL5 PSRAGXWDXL6 PSRAGXWDXL7
X-Wide/XXL
PSRAGXWDXXL3 PSRAGXWDXXL4 PSRAGXWDXXL5 PSRAGXWDXXL6 PSRAGXWDXXL7
2 Ply also available special order.
PROSTHETICS
Wide/Long
780
Knitted Goods
PROSTHETICS
PROSTHETIC SOCKS — Continued
a.
Easy Care™
True to its name, the Easy Care™ sock combines virgin wool with synthetic yarns to allow for machine washing and drying. Fleeced interior. Sold each. From Comfort Products.
Size Guide
Size 0
Top
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
6” 7” 8” 9” 10”11”12”
Toe (up to 18”)
3.5”
4”
5”
6”
6.5”
7”
8”
Toe (over 18”)
3.5”
4”
4”
4.5”
5”
5.5”
6”
3 Ply
10” Length
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
PSSN1003PSSN1013PSSN1023PSSN1033PSSN1043PSSN1053PSSN1063
12” Length
14” Length
16” Length
18” Length
20” Length
22” Length
24” Length
26” Length
28” Length
5 Ply
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
10” Length
12” Length
14” Length
16” Length
18” Length
20” Length
22” Length
24” Length
26” Length
PROSTHETICS
28” Length
6 Ply
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
10” Length
12” Length
14” Length
16” Length
18” Length
20” Length
22” Length
24” Length
26” Length
28” Length
Other plies available special order.
PROSTHETICS
b.
Knitted Goods
781
Comfort Products Wool Sock
100% virgin wool provides warmth, absorbency, insulation resilience, texture and versatility. Wool can absorb
up to 1/3 its weight in moisture without becoming damp. Sold each.
Size Guide
Top
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
6” 7” 8” 9” 10”11”12”
Toe (up to 18”)
3.5”
4”
5”
6”
6.5”
7”
8”
Toe (over 18”)
3.5”
4”
4”
4.5”
5”
5.5”
6”
3 Ply
10” Length
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
PSSW1003PSSW1013PSSW1023PSSW1033PSSW1043PSSW1053PSSW1063
12” Length
14” Length
16” Length
18” Length
20” Length
22” Length
24” Length
26” Length
28” Length
5 Ply
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
10” Length
12” Length
14” Length
16” Length
18” Length
20” Length
22” Length
24” Length
26” Length
28” Length
6 Ply
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
12” Length
14” Length
16” Length
18” Length
20” Length
22” Length
24” Length
26” Length
28” Length
PROSTHETICS
10” Length
782
Knitted Goods
PROSTHETICS
a.
SoftWick™
The SoftWick™ Sock features CoolMax® fibers to wick moisture away from the skin allowing the wearer to
stay dry and comfortable. Feels cooler in summer and warmer in winter. Resists shrinking, odor and mildew.
Machine washable. Sold each. From Comfort Products.
Size
Sock Size
Length
1 Ply
3 Ply
5 Ply
6 Ply
Narrow/Short
00, 0, 1
10-14”
SWNS1SWNS3SWNS5SWNS6
Narrow/Medium
00, 0, 1
16-20”
SWNM1SWNM3SWNM5SWNM6
Narrow Long
00, 0, 1
22-28”
SWNL1SWNL3SWNL5SWNL6
Regular/X-Short
1, 2
8-12”
SWRXS1SWRXS3SWRXS5SWRXS6
Regular/Short
1, 2
10-14”
SWRS1SWRS3SWRS5SWRS6
Regular/Medium
1, 2
16-20”
SWRM1SWRM3SWRM5SWRM6
Regular/Long
1, 2
22-28”
SWRL1SWRL3SWRL5SWRL6
Wide/Short
3+
10-14”
SWWS1SWWS3SWWS5SWWS6
Wide/Medium
3+
16-20”
SWWM1SWWM3SWWM5SWWM6
b.
Bio-Wick™
A one ply, CoolMax® and cotton seamless prosthetic sock. The CoolMax® interior wicks moisture away from
skin and into the outer cotton layer keeping the wearer dry and comfortable. Non-run construction allows
cutting to length without unraveling. Machine washable. Sold each. From Comfort Products.
Size
Sock Size
Length
Top
Toe
Item No.ò
Medium/Short
Arm, 00, 0, 1
14”
3.75-7.5”
3.75-6”
BWMS
Medium/Regular
Arm, 00, 0, 1
20”
3.75-7.5”
3.75-6”
BWMR
Medium/Long
Arm, 00, 0, 1
28”
3.75-7.5”
3.75-6”
BWML
Wide/Short
2, 3, 4, 5
14”
5-11”
4-8”
BWWS
Wide/Regular
2, 3, 4, 5
20”
5-11”
4-8”
BWWR
Wide/Long
2, 3, 4, 5
28”
5-11”
4-8”
BWWL
PROSTHETICS
c.
Ply-Two™
The double fleeced Ply-Two™ sock is quite possibly the softest sock available. Its 2 ply acrylic/Lycra® construction
offers amazing stretch, wicks moisture away from the skin and features a rounded, nylon reinforced toe for
added durability and reduced bunching. Machine washable. Non-allergenic. Sold each. From Comfort Products.
Size
Sock Size
Length
Top
Toe
Item No.ò
Narrow/X-Short
Arm, 00, 0, 1
8-10”
4.5-7.5”
2.75-5”
PTNXS
Narrow/Short
Arm, 00, 0, 1
10-14”
4.5-7.5”
2.75-5”
PTNS
Narrow/Regular
Arm, 00, 0, 1
14-20”
4.5-7.5”
2.75-5”
PTNR
Narrow/Long
Arm, 00, 0, 1
20”+
4.5-7.5”
275-5”
PTNL
Medium/X-Short
2, 3, 4, 5, 6
8-10”
7.25-12”
4-7.5”
PTMXS
Medium/Short
2, 3, 4, 5, 6
10-14”
7.25-12”
4-7.5”
PTMS
Medium/Regular
2, 3, 4, 5, 6
14-20”
7.25-12”
4-7.5”
PTMR
Medium/Long
2, 3, 4, 5, 6
20”+
7.25-12”
4-7.5”
PTML
PROSTHETICS
d.
Knitted Goods
783
SoftWick™ Half Sock™
The SoftWick™ Half Sock™ offers all the features of the standard SoftWick™ sock, but in ideal lengths for
distal volume management. The distal hole is knitted right into the sock to ensure a proper fit without unraveling. Each size features a distinct color coded band. Sold each. From Comfort Products.
Size
Band Color
Length
1
Black
3”
Top Width Toe Width
3”
2.5”
Item No.ò
SW21
2 Gray3”3.5”3”SW22
3
Royal Blue
6”
4”
2.75”
SW23
4
Turquoise
6”
5.5”
3.5”
SW24
e.
BK Prosthetic Tube Sock
An economical alternative to the traditional prosthetic sock. These socks are made using a unique air float
terry construction throughout the entire length of the sock, offering comfort and durability. All cotton construction provides maximum moisture absorption. 3 ply. Individually wrapped. 6/pkg. From Comfort Products.
Length
12”
16”
22”
28”
Maximum Size
8-10”
10-14”
16-20”
20-26”
Item No. ð
with Distal Hole ð
f.
X-Wool® Sock
A virgin wool sock plaited inside with X-Static®/Lycra® corespun yarn, the X-Wool® sock features the antimicrobial and thermodynamic properties of X-Static®. Absorbent virgin wool is thick and cushioning. Lycra®
allows garment to contour without stretching out of shape. Machine washable. Sold each. From Knit-Rite.
Size Guide
Sock Size
Length GuideX-Short
Short
00, 0, AS, AL
Regular
1, 2
Long
3, 4
5, 6
X-Long XX-Long
Length
8-10” 10-12” 14-16” 18-20”22-24” 26-28”
Size/Length
Color Code
Yellow
Yellow
Green
Green
Gray
1WX3NAXS 1WX3SNXS 1WX5NAXS1WX5SNXSN/A
Narrow/Short
1WX3NASH 1WX3SNSH 1WX5NASH1WX5SNSH 1WX6NASH
Narrow/Regular
1WX3NARG 1WX3SNRG 1WX5NARG1WX5SNRG 1WX6NARG
Narrow/Long
1WX3NALG 1WX3SNLG 1WX5NALG1WX5SNLG 1WX6NALG
Medium/X-Short
1WX3MDXS 1WX3SMXS 1WX5MDXS1WX5SMXSN/A
Medium/Short
1WX3MDSH 1WX3SMSH 1WX5MDSH1WX5SMSH 1WX6MDSH
Medium/Regular
1WX3MDRG 1WX3SMRG 1WX5MDRG1WX5SMRG 1WX6MDRG
Medium/Long
1WX3MDLG 1WX3SMLG 1WX5MDLG1WX5SMLG 1WX6MDLG
Medium/X-Long
1WX3MDXL
N/A1WX5MDXLN/A
N/A
Medium/XX-Long
1WX3MDXX
N/A1WX5MDXXN/A
N/A
Wde/Short
1WX3WDSH 1WX3SWSH 1WX5WDSH1WX5SWSH 1WX6WDSH
Wide/Medium
1WX3WDMD 1WX3SWMD 1WX5WDMD1WX5SWMD 1WX6WDMD
Wide/Long
1WX3WDLG
PROSTHETICS
Narrow/X-Short
3 Ply
3 Ply
5 Ply
5 Ply
6 Ply
RegularHole-In-ToeRegularHole-In-Toe Regular
N/A1WX5WDLGN/A1WX6WDLG
Wide/X-Long
1WX3WDXL
N/A1WX5WDXLN/A
N/A
Wide/XX-Long
1WX3WDXX
N/A1WX5WDXXN/A
N/A
X-Wide/Short
1WX3EWSH
N/A1WX5EWSHN/A
N/A
X-Wide/Medium
1WX3EWMD
N/A1WX5EWMDN/A
N/A
784
Knitted Goods
PROSTHETICS
a.
Super Sock®
100% virgin wool sock. Uniquely soft. Machine wash and dry. Sold each. See pages 789 for hole-in-toe and
nonstandard Super Sock® sizes. Sold each. From Knit-Rite.
Size Guide
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
Top
6” 7” 8” 9” 10”11”12”
Toe
3.5”4” 5” 6” 7” 7” 8”
Toe
Over 24”
Over 20”
Over 20”
Over 18”
Over 18”
4”5.5”6”5.5”6”
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
8” Length
3 Ply
1K130008
1K130108
1K130208
1K130308
1K130408
1K130508
1K130608
10” Length
1K1300101K1301101K1302101K1303101K130410 1K130510 1K130610
12” Length
1K1300121K1301121K1302121K1303121K1304121K1305121K130612
14” Length
1K1300141K1301141K1302141K1303141K1304141K1305141K130614
16” Length
1K1300161K1301161K1302161K1303161K1304161K1305161K130616
18” Length
1K1300181K1301181K1302181K1303181K1304181K1305181K130618
20” Length
1K1300201K1301201K1302201K1303201K1304201K1305201K130620
22” Length
1K1300221K1301221K1302221K1303221K1304221K1305221K130622
24” Length
1K1300241K1301241K1302241K1303241K1304241K1305241K130624
1K130126
1K1302261K1303261K1304261K1305261K130626
26” Length
1K130026
28” Length
1K1300281K1301281K1302281K1303281K1304281K1305281K130628
30” Length
1K130030 1K130130 1K130230 1K130330 1K130430 1K130530 1K130630
PROSTHETICS
5 Ply
Size 0
Size 1
Size 2
Size 3
Size 4
Size 5
Size 6
8” Length
1K150008
1K150108
10” Length
1K1500101K1501101K1502101K1503101K150410 1K150510 1K150610
12” Length
1K1500121K1501121K1502121K1503121K1504121K1505121K150612
14” Length
1K1500141K1501141K1502141K1503141K1504141K1505141K150614
1K1502081K1503081K1504081K1505081K150608
16” Length
1K1500161K1501161K1502161K1503161K1504161K1505161K150616
18” Length
1K1500181K1501181K1502181K1503181K1504181K1505181K150618
20” Length
1K1500201K1501201K1502201K1503201K1504201K1505201K150620
22” Length
1K1500221K1501221K1502221K1503221K1504221K150522 1K150622
24” Length
1K1500241K1501241K1502241K1503241K1504241K150524 1K150624
26” Length
1K150026
1K1501261K1502261K1503261K1504261K1505261K150626
28” Length
1K150028
1K1501281K1502281K150328 1K150428 1K150528 1K150628
30” Length
1K150030 1K150130 1K150230 1K150330 1K150430 1K150530 1K150630
6 Ply
Size 0
Size 1
Size 2
Size 3
Size 4
1K160208
1K160308
1K160408
Size 5
8” Length
1K160008
1K160108
10” Length
1K160010
1K1601101K1602101K160310 1K160410 1K160510
1K160508
12” Length
1K1600121K1601121K1602121K1603121K160412 1K160512
14” Length
1K1600141K1601141K1602141K1603141K160414 1K160514
16” Length
1K1600161K1601161K1602161K1603161K160416 1K160516
18” Length
1K1600181K1601181K1602181K1603181K160418 1K160518
20” Length
1K1600201K1601201K1602201K1603201K160420 1K160520
22” Length
1K1600221K1601221K1602221K160322 1K160422 1K160522
24” Length
1K1600241K1601241K1602241K160324 1K160424 1K160524
1K1602261K160326 1K160426 1K160526
26” Length
1K160026
1K160126
28” Length
1K160028
1K160128
1K160228
1K160328
1K160428
1K160528
30” Length
1K160030
1K160130
1K160230
1K160330
1K160430
1K160530
PROSTHETICS
b.
Knitted Goods
785
Super Sock®, Hole-In-Toe
100% virgin wool sock. Uniquely soft. Machine wash and dry. Sold each. See below for nonstandard Super
Sock® sizes. Sold each. From Knit-Rite.
Size 0
Top x Toe
Ply
6” x 3.5” 3
10” Length 12” Length
1K13S010
1K13S012
6” x 3.5”
5
1K15S0101K15S012
Size 1
Top x Toe
Ply
7” x 4”
3
10” Length 12” Length 14” Length
1K13S1101K13S1121K13S114
7” x 4”
5
1K15S1101K15S1121K15S114
Size 2
Top x Toe
Ply
8” x 5”
3
10” Length 12” Length 14” Length 16” Length
1K13S2101K13S2121K13S2141K13S216
8” x 5”
5
1K15S2101K15S2121K15S2141K15S216
Size 3
Top x Toe
Ply
9” x 6”
3
9” x 6”
5
c.
10” Length 12” Length 14” Length 16” Length 18” Length
1K13S3121K13S3141K13S3161K13S318
1K15S3121K15S3141K15S316N/A
Super Sock®, PTB Wide Taper
Top
Toe
3 Ply
5 Ply
6 Ply
Size 0
6”
3”
Length
10”
1T130310
1T150310
1T160310
6”
3”
12”
1T130312
1T150312
1T160312
6”
3”
14”
1T130314
1T150314
1T160314
6”
3”
16”
1T130316 1T150316 1T160316
Top
Toe
Size 1
7”
3.5”
Length
7”
3.5”
12”
1T131312
1T151312
1T161312
7”
3.5”
14”
1T131314
1T151314
1T161314
7”
3.5”
16”
1T131316
1T151316
1T161316
1T151410
1T161410
10”
3 Ply
5 Ply
6 Ply
1T131310
1T151310
1T161310
7”
4.5”
10”
1T131410
7”
4.5”
12”
1T1314121T1514121T161412
7”
4.5”
14”
1T1314141T1514141T161414
PROSTHETICS
7”
4.5”
16”
1T1314161T151416 1T161416
Size 2
Top
Toe
8”
4”
8”
4”
8”
4”
8”
8”
8”
Length
3 Ply
5 Ply
6 Ply
10”
1T132410
1T152410
1T162410
12”
1T132412
1T152412
1T162412
14”
1T1324141T152414 1T162414
4”
16”
1T132416
1T152416
1T162416
4.5”
10”
1T132S10
1T152S10
1T162S10
4.5”
12”
1T132S12
1T152S12
1T162S12
8”
4.5”
14”
1T132S14
1T152S14
1T162S14
8”
4.5”
16”
1T132S16
1T152S16
1T162S16
786
Knitted Goods
PROSTHETICS
a.
Soft-Sock®
The fibers of the Soft-Sock® wick moisture away from the skin and inhibit the growth of odor- causing bacteria.
Fleeced interior feels soft and cuddly worn next to the skin and insulates against the cold. Lycra® provides
stretch for excellent fit. Available in CoolMax®/Lycra® or Polyester/Lycra® with X-Static® —The Silver Fiber™.
Sold each. From Knit-Rite. See page 548 for child sizes.
CoolMax®/Lycra®
Size/Length
Sock Size
Length
Lightweight
B, 0, 1
10-14”
1SP1NASH 1SP3NASH1SP5NASH 1SP6NASH
Narrow/Medium B, 0, 1
16-20”
1SP1NAMD 1SP3NAMD1SP5NAMD 1SP6NAMD
Narrow/Long
Narrow/Short
3 Ply
5 Ply
6 Ply
B, 0, 1
22-28”
1SP1NALG 1SP3NALG1SP5NALG 1SP6NALG
Regular/X-Short
1, 2
8-12”
1SP1RGXS 1SP3RGXS1SP5RGXS 1SP6RGXS
Regular/Short
1, 2
10-14”
1SP1RGSH 1SP3RGSH1SP5RGSH 1SP6RGSH
Regular/Medium
1, 2
16-20”
1SP1RGMD 1SP3RGMD1SP5RGMD 1SP6RGMD
Regular/Long
1, 2
22-28”
1SP1RGLG 1SP3RGLG1SP5RGLG 1SP6RGLG
Wide/Short
3+
10-14”
1SP1WDSH 1SP3WDSH1SP5WDSH 1SP6WDSH
Wide/Medium
3+
16-20”
1SP1WDMD 1SP3WDMD1SP5WDMD 1SP6WDMD
X-Wide/Short
4+
10-14”
1SP1XWSH 1SP3XWSH1SP5XWSH
N/A
X-Wide/Medium 4+
16-20”
1SP1XWMD 1SP3XWMD1SP5XWMD
N/A
CoolMax®/Lycra® — Hole-In-Toe
Size/Length
Sock Size
Length
Lightweight
3 Ply
5 Ply
6 Ply
B, 0, 1
10-14”
1SPSNASH1SP3SNSH1SP5SNSH 1SP6SNSH
Narrow/Medium B, 0, 1
16-20”
1SPSNAMD1SP3SNMD1SP5SNMD 1SP6SNMD
8-12”
1SPSRGXS1SP3SRXS1SP5SRXS 1SP6SRXS
Narrow/Short
Regular/X-Short
1, 2
Regular/Short
1, 2
10-14”
1SPSRGSH1SP3SRSH1SP5SRSH 1SP6SRSH
Regular/Medium
1, 2
16-20”
1SPSRGMD1SP3SRMD1SP5SRMD 1SP6SRMD
Regular/Long
1, 2
22-28”
1SPSRGLG1SP3SRLG1SP5SRLG 1SP6SRLG
Wide/Short
3+
10-14”
1SPSWDSH1SP3SWSH1SP5SWSH 1SP6SWSH
Wide/Medium
3+
16-20”
1SPSWDMD1SP3SWMD1SP5SWMD 1SP6SWMD
Polyester/X-Static®/Lycra®
PROSTHETICS
Size/Length
Sock Size
Length
Lightweight
3 Ply
5 Ply
6 Ply
Narrow/Short
B, 0, 1
10-14”
1SX1NASH 1SX3NASH1SX5NASH
N/A
Regular/Short
1, 2
10-14”
1SX1RGSH 1SX3RGSH1SX5RGSH
N/A
Regular/Medium
1, 2
16-20”
1SX1RGMD 1SX3RGMD1SX5RGMD
N/A
Wide/Medium
3+
16-20”
1SX1WDMD 1SX3WDMD1SX5WDMD
N/A
PROSTHETICS
b.
Knitted Goods
787
DERO® Hole-In-Toe Soft-Sock®
The DERO sock minimizes or eliminates unwanted rotation and vertical movement between the outer socket
and silicone suspension liner or gel interface by incorporating friction enhancing polymer strips in the prosthetic sock. The DERO sock provides an opportunity for silicone suction suspension in transfemoral cases
where it may otherwise be contraindicated by allowing easier donning and volume management capability.
The polymer strips add virtually no thickness and are vertically oriented in standard AK and BK patterns to
allow various ply combinations, while maintaining the circumferential stretch inherent in the Soft-Sock®
prosthetic sock. Sold each. From Knit-Rite.
Size
Sock Size
Length
Lightweight
AK
Style
Regular Short
1, 2
10-14”
1DA1RGSH1DA3RGSH 1DA5RGSH
3 Ply
5 Ply
AK
Wide Medium
3+
16-20”
1DA1WDMD1DA3WDMD 1DA5WDMD
BK
Regular Short
1, 2
10-14”
1DB1RGSH1DB3RGSH 1DB5RGSH
c.
Hugger Top Soft-Sock®
Hugger Top Soft-Sock® provides a more tailored fit, reduces rolling and bunching and helps maintain sock
placement. It features a new patented hemispherically knit three-dimensional distal shape. The new distal
end shape provides improved fitting qualities and comfort over the traditional flat knit envelope shape of
prosthetic socks. Sold each. From Knit-Rite. See page 548 for child sizes.
Ply
Standard Sock
Lightweight3-PlyLightweight3-PlyLightweight3-Ply
Black
Black
Pink
Pink
White
White
Narrow Short
1BP1NASH1BP3NASH 1S21NASH 1S23NASH1HP1NASH1HP3NASH
Regular Medium
1BP1RGMD1BP3RGMD
Regular Short
1BP1RGSH1BP3RGSH 1S21RGSH 1S23RGSH1HP1RGSH1HP3RGSH
N/A
N/A
1HP1RGMD1HP3RGMD
Regular X-Short
1BP1RGXS1BP3RGXS 1S21RGXS 1S23RGXS1HP1RGXS1HP3RGXS
Hole-in-Toe Sock
Black
Black
Pink
Pink
White
White
Narrow Short
1BPSNASH1BP3SNSH 1S21SNSH 1S23NASH1HPSNASH1HP3SNSH
Regular Medium
1BPSRGMD1BP3SRMD
Regular Short
1BPSRGSH1BP3SRSH 1S21SRSH 1S23SRSH1HPSRGSH1HP3SRSH
Regular X-Short
1BPSRGXS1BP3SRXS 1S21SRXS 1S23SRXS1HPSRGXS1HP3SRXS
N/A
N/A
1HPSRGMD1HP3SRMD
d.
Shorty Soft-Sock®
Stitching
Top
Toe Length
Item No.ò
Red
4-3/4”
2-3/4”
7”
1SPSS181
Red
5-3/4”
3-1/8
5-5/8”
1SPSS191
Black
3-1/8”
2-5/8”
3-5/8”
1SPSS182
Black
4-1/2”
4”
3-1/4”
1SPSS192
PROSTHETICS
Shorty Soft-Sock is designed for use with elevated vacuum and total surface bearing sockets (TSB). It is shorter
in length to reduce volume mainly in the distal one third of the socket and remains below the suction sleeve.
Color keyed for ease of patient instruction. Distal hole. Knit with easy care CoolMax®. Sold each. From Knit-Rite.
788
Knitted Goods
PROSTHETICS
a.
A-Plus™ Sock
Acrylic/Lycra® spandex construction provides softness and stretch while wicking moisture away from the skin
for added comfort. Snuggly knit, the 2 ply A-Plus™ sock (green stitching) is comparable in thickness to a 3
ply wool sock; the 3 ply A-Plus™ sock (blue stitching) is comparable to a 5 ply wool; and the 4 ply A-plus™
sock (red stitching) is comparable to a 6 ply wool. Sold each. From Knit-Rite.
Size Guide
Size 0
Size 1
Size 2
Size 3
Size 4
Top 6” 7” 8”9”10”
Toe 3.5’4” 5” 6” 7”
Toe
Over 20”
Over 20”
5.5”
6”
Length 8”
10”
12”
14”
16”
18”
20”
22”
24”
Size 0
2 Ply 1KL200081KL200101KL200121KL200141KL200161KL200181KL20020 1KL20022 1KL20024
Size 1
2 Ply 1KL201081KL201101KL201121KL201141KL201161KL201181KL201201KL201221KL20124
4 Ply 1KL401081KL401101KL401121KL401141KL401161KL401181KL401201KL40122 1KL40124
Size 2
4 Ply 1KL402081KL402101KL402121KL402141KL402161KL402181KL402201KL40222 1KL40224
Size 3
2 Ply 1KL20308 1KL203101KL203121KL203141KL203161KL20318 1KL20320 1KL20322 1KL20324
3 Ply 1KL30308 1KL303101KL303121KL303141KL303161KL303181KL30320 1KL30322 1KL30324
Size 4
2 Ply 1KL20408 1KL20410 1KL20412 1KL204141KL204161KL20418 1KL20420 1KL20422 1KL20424
PROSTHETICS
3 Ply 1KL30408 1KL30410 1KL304121KL304141KL304161KL30418 1KL304201KL304221KL30424
PROSTHETICS
b.
Knitted Goods
789
A-Plus™ Sock, Hole-In-Toe
Knit-Rite’s A-Plus Sock with distal hole. Acrylic/Lycra® spandex construction provides softness and stretch while
wicking moisture away from the skin for added comfort. Snuggly knit, the 2 ply A-Plus™ sock is comparable
in thickness to a 3 ply wool sock; the 3 ply A-Plus™ sock is comparable to a 5 ply wool; and the 4 ply A-plus™
is comparable to a 6 ply wool. Sold each. See next page for nonstandard sizes.
Size Guide
Size 0
Size 1
Size 2
Size 3
Size 4
Top 6” 7” 8”9”10”
Toe 3.5’4” 5” 6” 7”
Toe
Over 20”
Over 20”
5.5”
6”
Length 8”
10”
12”
14”
16”
18”
20”
22”
24”
Size 0
2 Ply 1KL2S0081KL2S0101KL2S0121KL2S0141KL2S0161KL2S0181KL2S020 1KL2S022 1KL2S024
Size 1
2 Ply 1KL2S1081KL2S1101KL2S1121KL2S1141KL2S1161KL2S1181KL2S1201KL2S1221KL2S124
4 Ply 1KL4S1081KL4S1101KL4S1121KL4S1141KL4S1161KL4S1181KL4S1201KL4S122 1KL4S124
Size 2
4 Ply 1KL4S2081KL4S2101KL4S2121KL4S2141KL4S2161KL4S2181KL4S2201KL4S222 1KL4S224
Size 3
2 Ply 1KL2S308 1KL2S3101KL2S3121KL2S3141KL2S3161KL2S318 1KL2S320 1KL2S322 1KL2S324
3 Ply 1KL3S308 1KL3S3101KL3S3121KL3S3141KL3S3161KL3S3181KL3S320 1KL3S322 1KL3S324
Size 4
2 Ply 1KL2S408 1KL2S410 1KL2S412 1KL2S4141KL2S4161KL2S418 1KL2S420 1KL2S422 1KL2S424
3 Ply 1KL3S408 1KL3S410 1KL3S4121KL3S4141KL3S4161KL3S418 1KL3S420 1KL3S422 1KL3S424
PROSTHETICS
790
Knitted Goods
PROSTHETICS
a.
A-Plus™ Sock, Hole-In-Toe PTB Slim Taper
Sold each. From Knit-Rite. See previous page for standard sizes.
Top
Toe
Length
Size 0
6”
4”
10”
1TH204101TH304101TH40410
2 Ply
3 Ply
4 Ply
6”
4”
12”
1TH204121TH30412 1TH40412
6”
4”
14”
1TH20414
1TH30414
1TH40414
6”
4”
16”
1TH20416
1TH30416
1TH40416
1TH205101TH30510 1TH40510
6”
5”
10”
6”
5”
12”
1TH205121TH30512 1TH40512
6”
5”
14”
1TH205141TH30514 1TH40514
6”
5”
16”
1TH20516
1TH30516
1TH40516
Size 1
Top
Toe
Length
2 Ply
3 Ply
4 Ply
7”
5”
10”
1TH215101TH31510 1TH41510
7”
5”
12”
1TH215121TH31512 1TH41512
7”
5”
14”
1TH21514
1TH31514
1TH41514
7”
5”
16”
1TH21516
1TH31516
1TH41516
Top
Toe
Length
2 Ply
3 Ply
4 Ply
Size 2
8”
6”
10”
1TH22610
1TH32610
1TH42610
8”
6”
12”
1TH22612
1TH32612
1TH42612
8”
6”
14”
8”
6”
16”
1TH32616
1TH42616
PROSTHETICS
DISCON 1TH326141TH42614
1TH22616
PROSTHETICS
b.
Knitted Goods
791
Sterling® Wool
25% domestic virgin wool, 75% Australian virgin wool. The domestic wool provides strength and longevity, while the Australian wool adds softness and elasticity. 1 and 2-ply socks may be machine washed. Sold
each. Stitching color code listed beneath ply. Sold each. From Knit-Rite. See pages 798 for hole-in-toe and
nonstandard sizes.
Size 00
Top
Toe Length
1 Ply
White
2 Ply
Beige
3 Ply
Yellow
5 Ply
Green
6 Ply
Gray
7 Ply
Lavender
8 Ply
Lt Blue
5”
3”
10” 1MS1D0101MS2D0101WS3D0101WS5D0101WS6D0101WS7D0101WS8D010
5”
3”
12” 1MS1D012 1MS2D0121WS3D0121WS5D0121WS6D0121WS7D0121WS8D012
5”
3”
14” 1MS1D0141MS2D0141WS3D0141WS5D0141WS6D0141WS7D0141WS8D014
5”
3”
16” 1MS1D016 1MS2D016 1WS3D0161WS5D0161WS6D016 1WS7D016 1WS8D016
5”
3”
18” 1MS1D018 1MS2D018 1WS3D0181WS5D0181WS6D018 1WS7D018 1WS8D018
5”
3”
5”
3”
22” 1MS1D022 1MS2D022 1WS3D0221WS5D0221WS6D0221WS7D0221WS8D022
5”
3”
5”
3”
5”
3”
28”
N/AN/A
1WS3D028
1WS5D028
1WS6D028
N/AN/A
Size 0
Top
Toe Length
1 Ply
White
2 Ply
Beige
3 Ply
Yellow
5 Ply
Green
6 Ply
Gray
7 Ply
Lavender
8 Ply
Lt Blue
6”
3.5”
10” 1MS110101MS210101WS310101WS510101WS61010 1WS71010 1WS81010
6”
3.5”
12” 1MS110121MS210121WS310121WS510121WS610121WS71012 1WS81012
6”
3.5”
14”
1MS11014 1MS21014 1WS310141WS510141WS610141WS71014 1WS81014
6”
3.5”
16”
1MS11016 1MS21016 1WS310161WS510161WS61016 1WS710161WS81016
6”
3.5”
18”
1MS11018 1MS21018 1WS310181WS510181WS61018 1WS71018 1WS81018
6”
3.5”
20”
1MS11020 1MS21020 1WS310201WS510201WS610201WS71020 1WS81020
6”
3.5”
22”
1MS11022 1MS210221WS310221WS510221WS610221WS71022 1WS81022
6”
3.5”
24”
1MS11024 1MS21024 1WS310241WS510241WS610241WS71024 1WS81024
6”
3.5”
26”
1MS11026 1MS21026 1WS31026 1WS51026 1WS61026 1WS71026 1WS81026
6”
3.5”
28”
N/AN/A
1WS31028
1WS51028
1WS61028
N/AN/A
Size 1
Top
Toe Length
1 Ply
White
2 Ply
Beige
3 Ply
Yellow
5 Ply
Green
6 Ply
Gray
7 Ply
Lavender
8 Ply
Lt Blue
4”
4”
12” 1MS111121MS211121WS311121WS511121WS611121WS711121WS81112
7”
4”
14” 1MS111141MS211141WS311141WS511141WS611141WS711141WS81114
7”
4”
16” 1MS111161MS211161WS311161WS511161WS611161WS711161WS81116
7”
4”
18” 1MS111181MS211181WS31118 1WS511181WS611181WS711181WS81118
7”
4”
20”
1MS11120 1MS21120 1WS311201WS511201WS611201WS711201WS81120
7”
4”
22”
1MS11122 1MS21122 1WS311221WS511221WS611221WS711221WS81122
7”
4”
24”
1MS11124 1MS21124 1WS311241WS511241WS611241WS711241WS81124
7”
4”
26”
1MS11126 1MS21126 1WS311261WS511261WS61126 1WS71126 1WS81126
7”
4”
28”
N/A
N/A
1WS31128 1WS511281WS61128
N/A
N/A
Continued next page.
PROSTHETICS
10” 1MS111101MS211101WS311101WS511101WS611101WS711101WS81110
7”
7”
792
Knitted Goods
PROSTHETICS
a.
Sterling® Wool, continued
Size 2
Top
Toe Length
1 Ply
White
2 Ply
Beige
3 Ply
Yellow
5 Ply
Green
6 Ply
Gray
7 Ply
Lavender
8 Ply
Lt Blue
10” 1MS102101MS202101WS302101WS502101WS60210 1WS70210 1WS80210
8”
4”
8”
4”
12” 1MS102121MS202121WS302121WS502121WS602121WS702121WS80212
8”
4”
14” 1MS102141MS202141WS302141WS502141WS602141WS702141WS80214
8”
4”
16” 1MS102161MS202161WS302161WS502161WS602161WS702161WS80216
8”
4”
18”
8”
4”
20” 1MS10220 1MS202201WS302201WS502201WS602201WS70220 1WS80220
1MS10218 1MS202181WS302181WS502181WS602181WS70218 1WS80218
8”
4”
22” 1MS10222 1MS202221WS302221WS502221WS602221WS702221WS80222
8”
4”
24”
1MS10224 1MS202241WS302241WS502241WS602241WS702241WS80224
8”
4”
26”
1MS10226 1MS20226 1WS302261WS502261WS60226 1WS702261WS80226
8”
4”
28”
N/A
N/A
1WS302281WS502281WS60228
N/A
N/A
8”
4.5”
10”
1MS11210 1MS212101WS312101WS512101WS61210 1WS71210 1WS81210
8”
4.5”
12” 1MS112121MS212121WS312121WS512121WS61212 1WS712121WS81212
8”
4.5”
14”
1MS11214 1MS212141WS312141WS512141WS61214 1WS712141WS81214
8”
4.5”
16”
1MS11216 1MS212161WS312161WS512161WS61216 1WS71216 1WS81216
8”
4.5”
18”
1MS11218 1MS212181WS312181WS512181WS61218 1WS71218 1WS81218
8”
4.5”
20”
1MS11220 1MS212201WS312201WS512201WS61220 1WS71220 1WS81220
8”
4.5”
22”
1MS11222 1MS21222 1WS312221WS512221WS61222 1WS712221WS81222
8”
4.5”
24”
1MS11224 1MS21224 1WS312241WS512241WS61224 1WS71224 1WS81224
PROSTHETICS
8” 4.5” 26” 1MS11226 1MS21226 1WS31226 1WS51226 1WS61226 1WS71226 1WS81226
10” 1MS122101MS222101WS322101WS522101WS622101WS722101WS82210
8”
5”
8”
5”
12” 1MS122121MS222121WS322121WS522121WS622121WS722121WS82212
8”
5”
14” 1MS122141MS222141WS322141WS522141WS622141WS722141WS82214
8”
5”
16” 1MS122161MS222161WS322161WS522161WS622161WS722161WS82216
8”
5”
18”
1MS12218 1MS222181WS322181WS522181WS622181WS722181WS82218
8”
5”
20”
1MS12220 1MS222201WS322201WS522201WS622201WS722201WS82220
1MS12222 1MS222221WS322221WS522221WS622221WS72222 1WS82222
8”
5”
22”
8”
5”
24”
1MS12224 1MS222241WS322241WS522241WS622241WS72224 1WS82224
8”
5”
26”
1MS12226 1MS22226 1WS322261WS522261WS622261WS72226 1WS82226
8”
5”
28”
N/A
N/A
1WS322281WS522281WS62228
N/A
N/A
Size 3
Top
Toe
Length 1 Ply
White
2 Ply
Beige
3 Ply
Yellow
5 Ply
Green
6 Ply
Gray
7 Ply
Lavender
8 Ply
Lt Blue
9”
6”
10”1MS103101MS203101WS303101WS503101WS60310 1WS703101WS80310
9”
6”
12”1MS103121MS203121WS303121WS503121WS603121WS703121WS80312
9”
6”
14”1MS103141MS203141WS303141WS503141WS603141WS703141WS80314
9”
6”
16”1MS103161MS203161WS303161WS503161WS603161WS70316 1WS80316
9”
6”
18”1MS103181MS203181WS303181WS503181WS603181WS703181WS80318
9”
4.5”
20”1MS10320 1MS203201WS30320 1WS503201WS60320 1WS703201WS80320
9”
4.5”
22”1MS10322 1MS20322 1WS303221WS50322 1WS603221WS70322 1WS80322
9”
4.5”
9”
4.5”
24”1MS10324 1MS20324 1WS303241WS503241WS60324 1WS703241WS80324
26”
1MS10326 1MS20326 1WS303261WS503261WS60326 1WS70326 1WS80326
PROSTHETICS
b.
Knitted Goods
793
Sterling® Wool, continued
Size 4
Top
Toe Length
10”
6.5”
1 Ply
White
2 Ply
Beige
3 Ply
Yellow
5 Ply
Green
6 Ply
Gray
7 Ply
Lavender
8 Ply
Lt Blue
10”
1MS14110 1MS20410 1WS304101WS504101WS60410 1WS704101WS80410
1MS14112 1MS20412 1WS304121WS504121WS60412 1WS70412 1WS80412
10”
6.5”
12”
10”
6.5”
14” 1MS141141MS204141WS304141WS504141WS604141WS70414 1WS80414
10”
6.5”
16” 1MS141161MS204161WS304161WS504161WS60416 1WS70416 1WS80416
10” 6.5” 18” 1MS141181MS204181WS304181WS504181WS60418 1WS70418 1WS80418
10”
5”
20”
1MS14120 1MS204201WS304201WS504201WS604201WS704201WS80420
10”
5”
22”
1MS14122 1MS20422 1WS304221WS504221WS604221WS70422 1WS80422
10”
5”
24”
1MS14124 1MS204241WS304241WS504241WS604241WS70424 1WS80424
10”
5”
26”
1MS14126 1MS20426 1WS304261WS504261WS60426 1WS70426 1WS80426
10”
5”
28”
N/A
N/A
1WS304281WS504281WS60428
N/A
N/A
Size 5
Top
Toe Length
1 Ply
White
2 Ply
Beige
3 Ply
Yellow
5 Ply
Green
6 Ply
Gray
7 Ply
Lavender
8 Ply
Lt Blue
11”
7”
10”
1MS15110 1MS20510 1WS30510
1WS50510
N/AN/AN/A
11”
7”
12”
1MS15112 1MS20512 1WS305121WS50512
N/AN/AN/A
11”
7”
14”
1MS15114 1MS20514 1WS305141WS50514
N/AN/AN/A
11”
7”
16”
1MS15116 1MS20516 1WS305161WS50516
N/AN/AN/A
11”
7” 18” 1MS15118 1MS20518 1WS305181WS50518
N/AN/AN/A
11”
5.5”
20”
1MS15120 1MS20520 1WS305201WS50520
N/AN/AN/A
11”
5.5”
22”
1MS15122 1MS20522 1WS305221WS50522
N/AN/AN/A
11”
5.5”
24”
1MS15124
1MS20524
1WS30524
1WS50524
N/AN/AN/A
11”
5.5”
26”
1MS15126
1MS20526
1WS30526
1WS50526
N/AN/AN/A
11”
5.5”
28”
N/AN/A
1WS30528
1WS50528
N/AN/AN/A
Size 6
Top
Toe Length
1 Ply
White
2 Ply
Beige
3 Ply
Yellow
5 Ply
Green
6 Ply
Gray
7 Ply
Lavender
8 Ply
Lt Blue
12”
8”
10”
1MS16110
1MS20610
1WS30610
1WS50610
N/AN/AN/A
12”
8”
12”
1MS16112 1MS20612 1WS30612 1WS50612
N/AN/AN/A
12”
8”
14”
1MS16114 1MS20614 1WS306141WS50614
N/AN/AN/A
PROSTHETICS
12”
8”
16”
1MS16116
1MS20616
1WS30616
1WS50616
N/AN/AN/A
12”
8” 18” 1MS16118 1MS20618 1WS306181WS50618
N/AN/AN/A
12”
6”
20”
1MS16120 1MS20620 1WS306201WS50620
N/AN/AN/A
12”
6”
22”
1MS16122
1MS20622
1WS30622
1WS50622
N/AN/AN/A
12”
6”
24”
1MS16124
1MS20624
1WS30624
1WS50624
N/AN/AN/A
12”
6”
26”
1MS16126
1MS20626
1WS30626
1WS50626
N/AN/AN/A
12”
6”
28”
N/AN/A
1WS30628
1WS50628
N/AN/AN/A
794
Knitted Goods
PROSTHETICS
a.
Sterling® Wool — Hole-in-Toe
Standard sizes. Stitching color code listed beneath ply. Sold each. From Knit-Rite.
Top
Toe
Length
1 Ply
3 Ply
5 Ply
WhiteYellowGreen
6” 3.5”10” N/A
1HS310101HS51010
Size 0
6”
3.5”
12”
N/A
1HS310121HS51012
Size 1
7” 4”10”
1HS111101HS311101HS51110
7”
4”
12”
1HS111121HS311121HS51112
7”
4”
14”
1HS111141HS311141HS51114
Size 2
8” 4”10” N/A
1HS302101HS50210
8”
4”
12”
N/A
1HS302121HS50212
8”
4”
14”
N/A
1HS302141HS50214
8”
4”
16”
N/A
1HS302161HS50216
8”
4.5”
10”
N/A
1HS312101HS51210
8”
4.5”
12”
N/A
1HS312121HS51212
8”
4.5”
14”
N/A
1HS312141HS51214
8”
4.5”
16”
N/A
1HS31216 1HS51216
10”
1HS122101HS322101HS52210
8”
5”
8”
5”
12”
1HS122121HS322121HS52212
8”
5”
14”
1HS122141HS322141HS52214
8”
5”
16”
N/A
1HS322161HS52216
Size 3
9” 6”12” N/A
1HS303121HS50312
9”
6”
14”
N/A
1HS303141HS50314
9”
6”
16”
N/A
1HS303161HS50316
b.
Sterling® — PTB
PROSTHETICS
Stitching color code listed beneath ply. Sold each. From Knit-Rite.
10” (25cm) Length
Top
Toe
Wool
Wool
Wool
Cotton
Cotton
3 Ply
5 Ply
6 Ply
3 Ply
5 Ply
YellowGreen Gray YellowGreen
6”
3”
1WS30010 1WS50010 1WS60010 1CS30010 1CS50010
6”
3.5”
1WS310101WS510101WS61010 1CS31010 1CS51010
6”
4”
1WS32010 1WS52010 1WS62010 1CS32010 1CS52010
1WS33010 1WS53010 1WS63010 1CS33010 1CS53010
6”
5”
7”
3.5”
7”
4”
7”
4.5”
7”
5”
1WS331101WS531101WS63110 1CS33110 1CS53110
8”
4”
1WS302101WS502101WS60210 1CS302101CS50210
8”
4.5”
8”
5”
1WS30110 1WS50110 1WS60110 1CS30110
1CS50110
1WS311101WS511101WS61110 1CS31110 1SC51110
1WS321101WS52110 1WS62110 1CS32110 1CS52110
1WS312101WS512101WS61210 1CS312101CS51210
1WS322101WS522101WS62210 1CS32210 1CS52210
PROSTHETICS
c.
Knitted Goods
795
Sterling® — PTB, continued
12” (30cm) Length
Top
Toe
Wool
Wool
Wool
Cotton
Cotton
3 Ply
5 Ply
6 Ply
3 Ply
5 Ply
6”
3”
1WS30012 1WS50012 1WS60012 1CS30012 1CS50012
1WS310121WS510121WS61012 1CS31012 1CS51012
6”
3.5”
6”
4”
1WS32012 1WS52012 1WS62012 1CS32012
1CS52012
6”
5”
1WS33012 1WS53012 1WS63012 1CS33012
1CS53012
7”
3.5”
7”
4”
7”
4.5”
1WS301121WS501121WS60112 1CS30112 1CS50112
1WS311121WS511121WS61112 1CS31112 1SC51112
1WS321121WS521121WS62112 1CS32112 1CS52112
7”
5”
1WS331121WS531121WS631121CS33112 1CS53112
8”
4”
1WS302121WS502121WS60212 1CS30212 1CS50212
8”
4.5”
1WS312121WS512121WS61212 1CS31212 1CS51212
8”
5”
1WS322121WS522121WS62212 1CS32212 1CS52212
14” (35cm) Length
Top
Toe
Wool
Wool
Wool
Cotton
Cotton
3 Ply
5 Ply
6 Ply
3 Ply
5 Ply
6”
3”
1WS30014 1WS50014 1WS60014 1CS30014 1CS50014
6”
3.5”
1WS310141WS510141WS61014 1CS31014 1CS51014
6”
4”
1WS32014 1WS52014 1WS62014 1CS32014
1CS52014
1WS33014 1WS53014 1WS63014 1CS33014
1CS53014
6”
5”
7”
3.5”
7”
4”
7”
4.5”
1WS32114 1WS52114 1WS62114 1CS32114
1CS52114
7”
5”
1WS33114 1WS53114 1WS63114 1CS33114
1CS53114
8”
4”
1WS302141WS502141WS60214 1CS30214 1CS50214
8”
4.5”
1WS312141WS512141WS61214 1CS31214 1CS51214
1WS301141WS501141WS60114 1CS30114 1CS50114
1WS311141WS511141WS61114 1CS31114 1SC51114
8”
5”
1WS322141WS522141WS62214 1CS32214 1CS52214
16” (40cm) Length
Top
Toe
Wool
Wool
Wool
Cotton
Cotton
3 Ply
5 Ply
6 Ply
3 Ply
5 Ply
6”
3”
1WS30016 1WS50016 1WS60016 1CS30016 1CS50016
6”
3.5”
1WS310161WS510161WS61016 1CS310161CS51016
6”
4”
1WS32016 1WS52016 1WS62016 1CS32016
1WS33016 1WS53016 1WS63016 1CS33016 1CS53016
1CS52016
6”
5”
7”
3.5”
7”
4”
7”
4.5”
1WS32116 1WS52116 1WS62116 1CS32116
1CS52116
7”
5”
1WS33116 1WS53116 1WS63116 1CS33116
1CS53116
8”
4”
1WS302161WS502161WS60216 1CS302161CS50216
8”
4.5”
8”
5”
1WS30116 1WS501161WS60116 1CS30116 1CS50116
1WS311161WS511161WS61116 1CS31116 1SC51116
1WS312161WS512161WS61216 1CS312161CS51216
1WS322161WS522161WS62216 1CS32216 1CS52216
PROSTHETICS
796
Knitted Goods
PROSTHETICS
a.
Sterling® Stretch Sock
Acrylic/Lycra® blend helps sock conform to the shape of the limb. Fleecing on the inside adds softness. These
socks contour and cushion the limb, while wicking moisture away from the skin. Sold each. From Knit-Rite.
Top
Toe
Length
Narrow/X-Short 00, 0, A
Size/Length
Sock Size
4-6”
3-3.5”
8-10”
1SS3NAXS1SS5NAXS 1SS6NAXS
Narrow/Short
4-6”
3-3.5”
10-12”
1SS3NASH1SS5NASH1SS6NASH
1SS3NARG1SS5NARG1SS6NARG
00, 0, A
5 Ply
6 Ply
Narrow/Reguar
00, 0, A
4-6”
3-3.5”
14-16”
Narrow/Long
00, 0, A
4-6”
3-3.5”
18-20”
1SS3NALG1SS5NALG1SS6NALG
Medium/X-Short
1, 2
7-8”
4-5”
8-10”
1SS3MDXS1SS5MDXS1SS6MDXS
Medium/Short
1, 2
7-8”
4-5”
10-12”
1SS3MDSH1SS5MDSH1SS6MDSH
Medium/Regular
1, 2
7-8”
4-5”
14-16”
1SS3MDRG1SS5MDRG1SS6MDRG
Medium/Long
1, 2
7-8”
4-5”
18-20”
1SS3MDLG1SS5MDLG1SS6MDLG
Medium/X-Long
1, 2
7-8”
4-5”
22-24”
1SS3MDXL1SS5MDXL1SS6MDXL
Medium/XX-Long 1, 2
7-8”
4-5”
26-28”
1SS3MDXX1SS5MDXX 1SS6MDXX
Wide/Short
9-10”
6-7”
10-12”
1SS3WDSH1SS5WDSH1SS6WDSH
3, 4
Wide/Medium
3, 4
9-10”
6-7”
14-16”
1SS3WDMD1SS5WDMD1SS6WDMD
Wide/Long
3, 4
9-10”
4.5-5”
18-20”
1SS3WDLG1SS5WDLG1SS6WDLG
Wide/X-Long
3, 4
9-10”
4.5-5”
22-24”
1SS3WDXL1SS5WDXL 1SS6WDXL
Wide/XX-Long
3, 4
9-10”
4.5-5”
26-28”
1SS3WDXX
X-Wide/Short
5, 6
11-12”
7-8”
12-14”
1SS3EWSH1SS5EWSH 1SS6EWSH
X-Wide/Medium
5, 6
11-12”
7-8”
16-18”
1SS3EWMD1SS5EWMD1SS6EWMD
b.
3 Ply
1SS5WDXX1SS6WDXX
Sterling® Stretch, Hole-in-Toe
Acrylic/Lycra® blend helps sock conform to the shape of the limb. Fleecing on the inside adds softness. These
socks contour and cushion the limb, while wicking moisture away from the skin. Sold each. From Knit-Rite.
Size/Length
PROSTHETICS
Sock Size
Top
Toe
Length
Narrow/Short
00, 0, A
4-6”
3-3.5”
10-12”
1HS3NASH1HS5NASH1HS6NASH
3 Ply
5 Ply
6 Ply
Narrow/Reguar
00, 0, A
4-6”
3-3.5”
14-16”
1HS3NARG1HS5NARG1HS6NARG
Narrow/Long
00, 0, A
4-6”
3-3.5”
18-20”
1HS3NALG1HS5NALG1HS6NALG
Medium/Short
1, 2
7-8”
4-5”
10-12”
1HS3MDSH1HS5MDSH1HS6MDSH
Medium/Regular
1, 2
7-8”
4-5”
14-16”
1HS3MDRG1HS5MDRG1HS6MDRG
Medium/Long
1, 2
7-8”
4-5”
18-20”
1HS3MDLG1HS5MDLG1HS6MDLG
Medium/X-Long
1, 2
7-8”
4-5”
22-24”
1HS3MDXL1HS5MDXL1HS6MDXL
Medium/XX-Long 1, 2
7-8”
4-5”
26-28”
1HS3MDXX1HS5MDXX 1HS6MDXX
Wide/Short
9-10”
6-7”
10-12”
1HS3WDSH1HS5WDSH DISCON
3, 4
Wide/Medium
3, 4
9-10”
6-7”
14-16”
1HS3WDMD1HS5WDMD1HS6WDMD
Wide/Long
3, 4
9-10”
4.5-5”
18-20”
1HS3WDLG1HS5WDLG1HS6WDLG
Wide/X-Long
3, 4
9-10”
4.5-5”
22-24”
1HS3WDXL1HS5WDXL1HS6WDXL
1HS3WDXX1HS5WDXX1HS6WDXX
Wide/XX-Long
3, 4
9-10”
4.5-5”
26-28”
X-Wide/Short
5, 6
11-12”
7-8”
12-14”
1HS3EWSH1HS5EWSH
N/A
X-Wide/Medium
5, 6
11-12”
7-8”
16-18”
1HS3EWMD1HS5EWMD
N/A
PROSTHETICS
Knitted Goods
797
SYME’S and PARTIAL FOOT SOCKS
c.
Super-Sock® Syme’s
Knit-Rite’s 100% virgin wool prosthetic sock for Syme’s amputees. Sold each.
Super-Sock® Size
Top x Ankle x Ball
Ply
6” x 3” x 3.5”
18” Length
22” Length
24” Length
3
1S13A018 1S13A0201S13A0221S13A024
5
1S15A018 1S15A0201S15A0221S15A024
0
3
1S13B0181S13B0201S13B022 1S13B024
5
1S15B018
1S15B0201S15B0221S15B024
0
3
1S13C018
1S13C0201S13C0221S13C024
5
1S15C018
1S15C020
0
6” x 3” x 4”
6” x 3.5” x 4”
0
6” x 3.5” x 4.5”
1S15C022
1S15C024
1S13D024
3
1S13D018
1S13D020
1S13D022
5
1S15D018
1S15D020
1S15D0221S15D024
1
3
1S13A1181S13A1201S13A1221S13A124
5
1S15A118
1S15A120
1S15A1221S15A124
1
3
1S13B118
1S13B120
1S13B122
5
1S15B1181S15B1201S15B122 1S15B124
7” x 3” x 3.5”
7” x 3” x 4”
1S13B124
3
1S13C118
1S13C1201S13C122 1S13C124
5
1S15C118
1S15C1201S15C122 1S15C124
1
3
1S13D118
1S13D1201S13D122 1S13D124
5
1S15D118
1S15D1201S15D122 1S15D124
1
7” x 3.5” x 4”
7” x 3.5” x 4.5”
d.
20” Length
Soft-Sock® Syme’s
Knit-Rite’s CoolMax®/Lycra® prosthetic sock for Syme’s amputees. Sold each.
Soft-Sock® Size
Ply
6” x 3” x 3.5”
3
1SP3A018 1SP3A0201SP3A0221SP3A024
5
1SP5A018 1SP5A0201SP5A0221SP5A024
1
3
1SP3E118 1SP3E1201SP3E122 1SP3E124
5
1SP5E118 1SP5E1201SP5E122 1SP5E124
3
1SP3H118
1SP3H120
1SP3H1221SP3H124
5
1SP5H118
1SP5H120
1SP5H1221SP5H124
7” x 4” x 4.5”
1
7” x 5” x 5.5”
18” Length
e.
20” Length
22” Length
24” Length
Syme’s Gel Liner
PROSTHETICS
Top x Ankle x Ball
0
CoolMax® fabric with 3mm vitamin enriched gel to prevent abrasion and skin breakdown. One size fits most.
Sold each. From Silipos.
Length
Gel Length
16.5” (42cm)
15” (38cm)
Distal Circ
Prox Circ
10-14” (25-37cm) 15-20” (38-51cm)
Item No.ò
1302
798
Knitted Goods
PROSTHETICS
SYME’S and PARTIAL FOOT SOCKS — Continued
a.
SmartKnit® Partial Foot Sock
No heel assures custom fit. For all levels of partial foot amputation. Completely seamless. Knit with core-spun
yarns. Multi-directional stretch for smooth, comfortable fit. Breathable, washable CoolMax®/Lycra in white
and X-Static® in black. Wicks moisture from the skin. Anti-microbial to inhibit odor in the sock. Non-binding
Halo™ top. One size fits all. 3.5” width. 14.5” length. Sold each. From Knit-Rite.
Color
White
Black
Item No. ð
8410784707
b.
Partial Foot Sock with Gel
For use with transmetatarsal amputees, this sock features elastic conforming CoolMax® fabric. Gel covers
amputation site. May be used with foot orthosis or shoe with filler. Sold each. From Silipos.
Size
Regular
X-Long
Item No. ð
10805-SI10815
HIP DISARTICULATION SOCKS
c.
Hip Disarticulation Sock
Standard conventional unilateral style. Seamless design available in poly/X-Static®, acrylic/Lycra® and Soft-Sock®
fabric. Color-coded, turned over hem at waist. 3” leg extension. Non-standard sizing, hemi-pelvectomy, fly
opening available special order. Sold each. From Knit-Rite.
PROSTHETICS
Flat width measurement should be 10-20% less than half the actual circumference of hip.
Flat Width
Length
3 Ply
2 Ply
3 Ply
3 Ply
5 Ply
X-Static®Acrylic/Lycra®Acrylic/Lycra®Soft-Sock®Soft-Sock®
8” (20cm)
12” (30cm)
1HX30812N/A
N/A
N/A
10” (25cm)
12” (30cm)
1HX31012N/A
N/A
N/A
N/A
12” (30cm)
14” (36cm)
1HX31214N/A
N/A
N/A
N/A
12” (30cm)
16” (40cm)
13” (33cm)
14” (36cm)
13” (33cm)
16” (40cm)
N/A
1HL21216
1HX31314N/A
N/A
1HL21316
1HX31414N/A
1HL31216
N/A
1HL31316
N/A
1HP31316
N/A
1HP51216
N/A
1HP51316
14” (36cm)
14” (36cm)
14” (36cm)
16” (40cm)
15” (38cm)
16” (40cm)
1HX315161HL21516 1HL315161HP31516 1HP51516
N/A
N/A
1HP31216
N/A
N/A
1HL21416 1HL314161HP31416 1HP51416
16” (40cm)
16” (40cm)
1HX316161HL21616 1HL316161HP31616 1HP51616
17” (44cm)
16” (40cm)
1HX317161HL21716 1HL31716 1HP31716 1HP51716
18” (46cm)
16” (40cm)
N/A
1HL21816
N/A
1HL219161HL319161HP31916 1HP51916
19” (48cm)
16” (46cm)
18” (46cm)
18” (46cm)
1HX31818N/A
19” (48cm)
18” (46cm)
1HX31918
1HL31816
N/A
1HP31816
N/A
1HP51816
N/A
N/A N/AN/A N/A
PROSTHETICS
Knitted Goods
799
PROSTHETIC SOCK ACCESSORIES
d.
KISS® Anti Fray Sock Iron-Ons
When using a sock with KISS® suspension systems, these iron-ons prevent fraying. Most socks are made with
reinforced distal holes, but KISS® also requires a reinforced proximal hole. Securely reinforce any hole you
cut in a sock, and eliminate fray with these Iron-Ons. 12 per package. From KISS®.
Item No. ð
CMP17/A
COSMETIC STOCKINGS
e.
Cosmetic Hose, Tube Style
No heel, tube design available in plain or elastic top in three BK and five AK lengths. Four colors. Heavy-duty
100% nylon construction. Uniformly controlled compression. Sold pair. From Comfort Products.
Plain Top
Size
Length
Caucasian
Hispanic
Lt Negroid
Dk Negroid
BK-1
22”
99BK161CP99BK161HP99BK161LP 99BK161DP
BK-2
25”
99BK162CP 99BK162HP99BK162LP 99BK162DP
BK-3
28”
99BK163CP99BK163HP99BK163LP 99BK163DP
AK-0
36”
99AK140CP99AK140HP99AK140LP 99AK140DP
AK-1
38”
AK-2
40”
99AK142CP 99AK142HP99AK142LP 99AK142DP
AK-3
42”
AK-4
44”
Size
Length
BK-1
22”
99BK161CE99BK161HE99BK161LE 99BK161DE
Caucasian
Hispanic
Lt Negroid
Dk Negroid
BK-2
25”
BK-3
28”
AK-0
36”
99AK140CE 99AK140HE99AK140LE 99AK140DE
AK-1
38”
99AK141CE99AK141HE99AK141LE 99AK141DE
AK-2
40”
AK-3
42”
AK-4
44”
PROSTHETICS
Elastic Top
800
Knitted Goods
PROSTHETICS
COSMETIC STOCKINGS — Continued
a.
Cosmetic Hose with Knitted Heel
Knitted heel design for a more intimate fit and reduced wrinkling at ankle. Knit stretch top in three BK lengths
and elastic top in five AK lengths. Four colors. Heavy-duty 100% nylon construction. Uniformly controlled
compression. Sold pair. From Comfort Products.
Plain Top
Size
Length
Caucasian
Hispanic
Lt Negroid
Dk Negroid
BK-1
22”
98BHT161C98BHT161H98BHT161L 98BHT161D
BK-2
25”
BK-3
28”
Elastic Top
Size
Length
Caucasian
Hispanic
Lt Negroid
Dk Negroid
AK-0
36”
AK-1
38”
98AHT141C98AHT141H98AHT141L 98AHT141D
AK-2
40”
AK-3
42”
AK-4
44”
b.
Cosmetic Underhose
100% stretch nylon. AK/BK length. Dusk or brown. Sold pair. From Knit-Rite.
Size
Small
Medium
Large
X-Large
XL/X-Long
Foot Length
21.5-24cm
24-26.5cm
26.5-29cm
29-32cm
29-32cm
Dusk
2H7390SM2H7390MD 2H7390LG 2H7390XL 2H7390LL
Brown
2H7391SM2H7391MD 2H7391LG 2H7391XL 2H7391LL
c.
Knee Length Cosmetic Hose
100% stretch nylon. Knee length. Dusk or brown. Sold pair. From Knit-Rite.
Size
Small
Large
King Size
PROSTHETICS
Foot Length
21.5-25cm
26.5-30.5”
30.5-33cm
Dusk
2H7395SM2H7395LG
2H7395KG
Brown
2H7396SM
2H7396KG
2H7396LG
d.
AK Cosmetic Stockings
100% nylon. Features elasticized silicone gripper cuff. Color-coded thread sizing. Sold pair. From Knit-Rite.
Size
Size 0
Size I
Color-Code
Natural
Green
Black
Pink
Blue
Top Circumference
36cm
36cm
38cm
40cm
40cm
Leg Length
72cm
76cm
78cm
80cm
90cm
20cm
20cm
20.5cm
21cm
22cm
Foot Length
Size II
Size III
Size IV
Caucasian
2HB9B140 2HB9B141 2HB9B1422HB9B143 2HB9B144
Negroid
2HR9B140 2HR9B141 2HR9B1422HR9B143 2HR9B144
Hispanic
2HL9B140 2HL9B141 2HL9B1422HL9B143 2HL9B144
PROSTHETICS
e.
Knitted Goods
801
BK Cosmetic Stockings
100% nylon. Features elasticized silicone gripper cuff. Color-coded thread sizing. Sold pair. From Knit-Rite.
Size
Size I
Size II
Size III
Color-Code
Green Black Pink
Top Circumference
25cm
25cm
27cm
Leg Length
36cm
41cm
46cm
Foot Length
20cm
21cm
22cm
Caucasian
2HB9B1612HB9B162 2HB9B163
Negroid
2HR9B1612HR9B162 2HR9B163
Hispanic
2HL9B1612HL9B162 2HL9B163
f.
Proximal Connection Piece
Used to hold the foam cover to the AK socket. Color-coded thread sizing. Caucasian color. Sold each. From
Knit-Rite.
Size
Size I
Size II
Size III
Color-Code
Green Black Pink
Top Circumference
28cm
34cm
40cm
Item No. ð
2HB9B1512HB9B152 2HB9B153
PROSTHETICS
Rounding up the usual suspects…
FIVE FEET. ONE LINE UP.
NO COINCIDENCE.
8
20
19
7.1
18
7
17
16
6
15
14
12
11
10
9
Seatt
le
Energ
y
e
Seattl 9
yst
Catal
Seattle
ofile
Low Pr
5
Seattle
Triump
h
Seattle
Kinetic
4
3.5
8
INCHES
CENTIMETRES
13
3
7
2.8
6
2
5
4
3
1
2
1
0
0
Product name
Product No.
Keel Category
Size range
Product weight
Clearance
Heel rise
Seattle Catalyst 9
SHF39x*
1 to 9
22-30 cm
493 g • 1.1 lb
18 cm • 7.1"
Adjustable with
heel wedges
Seattle Energy
SEF19*
1 to 4
22-30 cm
330 g • 0.7 lb
9 cm • 3.5"
9.5 mm - 3/8"
Seattle LP
SLP35x*
1 to 3
4
22-30 cm
26-30 cm
400 g • 0.9 lb
9 cm • 3.5"
9.5 mm - 3/8"
Seattle Triumph
STF19x*
2 to 5
22-30 cm
493 g • 1.1 lb
18 cm • 7.1"
9.5 mm - 3/8"
Seattle Kinetic
SKF20x*
1 to 5 (bumper)
22-30 cm
495 g • 1.1 lb**
7 cm • 2.8"
9.5 mm - 3/8"
Product name
Activity
Weight limit
Includes
Warranty
L-Code
Seattle Catalyst 9
Medium to high;
K3-K4
166 kg • 366 lb
Foot shell, Spectra® sock, shoe horn, 3 heel
wedges
Keel: 3 years
Foot shell: 6 months
L5987, L5986
Seattle Energy
Medium; K3
136 kg • 300 lb
Foot shell, spacer, male pyramid, Spectra® sock
Keel: 2 years
L5976
Seattle LP
Medium to high;
K3-K4
136 kg • 300 lb
Foot shell, Spectra® sock, bearing kit
Keel: 3 years
L5981, L5986
Seattle Triumph
Medium to high;
K3-K4
166 kg • 366 lb
Foot shell, Spectra® sock
Keel: 3 years
L5987, L5986
Seattle Kinetic
Moderate activity; K2
166 kg • 366 lb
Foot shell (non-removable), female foot
adapter and 17" male-bonded pylon
Keel: 2 years
Foot shell: 1 year
L5972, L5986
*X is cosmesis color; 0 = Caucasian, 1 = Light Brown, 3 = Dark Brown
**Size 25 with foot shell. All other weights are without foot shell.
www.trulife.com
S O L U T I O N S T H AT F I T P R O S T H E T I C T E X T I L E S
Knit-Rite, Inc. is the world’s leading developer and manufacturer of innovative prosthetic and
orthotic textile products. Since 1923 we have worked with practitioners to advance textile
solutions that promote mobility, protection, and comfort for patients. With a variety of prosthetic
socks, sheaths, shrinkers, and lower extremity suspension products, Knit-Rite continues to innovate
Compressogrip®
B/K Shrinker
Liner-Liner ®
Prosthetic Sock
with X-STATIC®
A/K Compressogrip
Shrinker
X-Wool®
Prosthetic Sock
Power PullTM
Silver Sheath
Power Belt
Shorty Soft Sock
®
Spacer Socks
Hugger Top Soft-Sock®
with 3-D Toe Shape
products with patients’ needs in mind.
Soft Sock ®
from Emotis
TM
FOOT SYSTEM
from Emotis
FOOT SYSTEM
TM
from Emotis
XD
XD
from Emotis
from Emotis
from Emotis
MICROPROCESSOR FOOT
from Hosmer
A Foot for EvEry
Activity & LocAtion
AD332/05-17-12
Discover the ProAdvantage.
Attachment Kit 650
Lamination or Thermoplastic
Attachment Kit 600-AKT/P
Standard or with Titanium Pyramid
Attachment Kit 600
with improved airtight seal
Attachment Kit 200
Push Button, large
Attachment Kit 150
Push Button, small
©2012 Cascade Orthopedic Supply, Inc. Patent pending. ProAdvantage® is a registered trademark of Cascade.
808

Prosthetics Section

Transcription

Similar documents

Orthotic Product Information Guide